ui/node_modules/katex/src/fontMetrics.js

// @flow
import {supportedCodepoint} from "./unicodeScripts";

import type {Mode} from "./types";

/**
 * This file contains metrics regarding fonts and individual symbols. The sigma
 * and xi variables, as well as the metricMap map contain data extracted from
 * TeX, TeX font metrics, and the TTF files. These data are then exposed via the
 * `metrics` variable and the getCharacterMetrics function.
 */

// In TeX, there are actually three sets of dimensions, one for each of
// textstyle (size index 5 and higher: >=9pt), scriptstyle (size index 3 and 4:
// 7-8pt), and scriptscriptstyle (size index 1 and 2: 5-6pt).  These are
// provided in the arrays below, in that order.
//
// The font metrics are stored in fonts cmsy10, cmsy7, and cmsy5 respectively.
// This was determined by running the following script:
//
//     latex -interaction=nonstopmode \
//     '\documentclass{article}\usepackage{amsmath}\begin{document}' \
//     '$a$ \expandafter\show\the\textfont2' \
//     '\expandafter\show\the\scriptfont2' \
//     '\expandafter\show\the\scriptscriptfont2' \
//     '\stop'
//
// The metrics themselves were retrieved using the following commands:
//
//     tftopl cmsy10
//     tftopl cmsy7
//     tftopl cmsy5
//
// The output of each of these commands is quite lengthy.  The only part we
// care about is the FONTDIMEN section. Each value is measured in EMs.
const sigmasAndXis = {
    slant: [0.250, 0.250, 0.250],       // sigma1
    space: [0.000, 0.000, 0.000],       // sigma2
    stretch: [0.000, 0.000, 0.000],     // sigma3
    shrink: [0.000, 0.000, 0.000],      // sigma4
    xHeight: [0.431, 0.431, 0.431],     // sigma5
    quad: [1.000, 1.171, 1.472],        // sigma6
    extraSpace: [0.000, 0.000, 0.000],  // sigma7
    num1: [0.677, 0.732, 0.925],        // sigma8
    num2: [0.394, 0.384, 0.387],        // sigma9
    num3: [0.444, 0.471, 0.504],        // sigma10
    denom1: [0.686, 0.752, 1.025],      // sigma11
    denom2: [0.345, 0.344, 0.532],      // sigma12
    sup1: [0.413, 0.503, 0.504],        // sigma13
    sup2: [0.363, 0.431, 0.404],        // sigma14
    sup3: [0.289, 0.286, 0.294],        // sigma15
    sub1: [0.150, 0.143, 0.200],        // sigma16
    sub2: [0.247, 0.286, 0.400],        // sigma17
    supDrop: [0.386, 0.353, 0.494],     // sigma18
    subDrop: [0.050, 0.071, 0.100],     // sigma19
    delim1: [2.390, 1.700, 1.980],      // sigma20
    delim2: [1.010, 1.157, 1.420],      // sigma21
    axisHeight: [0.250, 0.250, 0.250],  // sigma22

    // These font metrics are extracted from TeX by using tftopl on cmex10.tfm;
    // they correspond to the font parameters of the extension fonts (family 3).
    // See the TeXbook, page 441. In AMSTeX, the extension fonts scale; to
    // match cmex7, we'd use cmex7.tfm values for script and scriptscript
    // values.
    defaultRuleThickness: [0.04, 0.049, 0.049], // xi8; cmex7: 0.049
    bigOpSpacing1: [0.111, 0.111, 0.111],       // xi9
    bigOpSpacing2: [0.166, 0.166, 0.166],       // xi10
    bigOpSpacing3: [0.2, 0.2, 0.2],             // xi11
    bigOpSpacing4: [0.6, 0.611, 0.611],         // xi12; cmex7: 0.611
    bigOpSpacing5: [0.1, 0.143, 0.143],         // xi13; cmex7: 0.143

    // The \sqrt rule width is taken from the height of the surd character.
    // Since we use the same font at all sizes, this thickness doesn't scale.
    sqrtRuleThickness: [0.04, 0.04, 0.04],

    // This value determines how large a pt is, for metrics which are defined
    // in terms of pts.
    // This value is also used in katex.less; if you change it make sure the
    // values match.
    ptPerEm: [10.0, 10.0, 10.0],

    // The space between adjacent `|` columns in an array definition. From
    // `\showthe\doublerulesep` in LaTeX. Equals 2.0 / ptPerEm.
    doubleRuleSep: [0.2, 0.2, 0.2],

    // The width of separator lines in {array} environments. From
    // `\showthe\arrayrulewidth` in LaTeX. Equals 0.4 / ptPerEm.
    arrayRuleWidth: [0.04, 0.04, 0.04],

    // Two values from LaTeX source2e:
    fboxsep: [0.3, 0.3, 0.3], //        3 pt / ptPerEm
    fboxrule: [0.04, 0.04, 0.04], // 0.4 pt / ptPerEm
};

// This map contains a mapping from font name and character code to character
// metrics, including height, depth, italic correction, and skew (kern from the
// character to the corresponding \skewchar)
// This map is generated via `make metrics`. It should not be changed manually.
import metricMap from "./fontMetricsData";

// These are very rough approximations.  We default to Times New Roman which
// should have Latin-1 and Cyrillic characters, but may not depending on the
// operating system.  The metrics do not account for extra height from the
// accents.  In the case of Cyrillic characters which have both ascenders and
// descenders we prefer approximations with ascenders, primarily to prevent
// the fraction bar or root line from intersecting the glyph.
// TODO(kevinb) allow union of multiple glyph metrics for better accuracy.
const extraCharacterMap = {
    // Latin-1
    'Å': 'A',
    'Ð': 'D',
    'Þ': 'o',
    'å': 'a',
    'ð': 'd',
    'þ': 'o',

    // Cyrillic
    'А': 'A',
    'Б': 'B',
    'В': 'B',
    'Г': 'F',
    'Д': 'A',
    'Е': 'E',
    'Ж': 'K',
    'З': '3',
    'И': 'N',
    'Й': 'N',
    'К': 'K',
    'Л': 'N',
    'М': 'M',
    'Н': 'H',
    'О': 'O',
    'П': 'N',
    'Р': 'P',
    'С': 'C',
    'Т': 'T',
    'У': 'y',
    'Ф': 'O',
    'Х': 'X',
    'Ц': 'U',
    'Ч': 'h',
    'Ш': 'W',
    'Щ': 'W',
    'Ъ': 'B',
    'Ы': 'X',
    'Ь': 'B',
    'Э': '3',
    'Ю': 'X',
    'Я': 'R',
    'а': 'a',
    'б': 'b',
    'в': 'a',
    'г': 'r',
    'д': 'y',
    'е': 'e',
    'ж': 'm',
    'з': 'e',
    'и': 'n',
    'й': 'n',
    'к': 'n',
    'л': 'n',
    'м': 'm',
    'н': 'n',
    'о': 'o',
    'п': 'n',
    'р': 'p',
    'с': 'c',
    'т': 'o',
    'у': 'y',
    'ф': 'b',
    'х': 'x',
    'ц': 'n',
    'ч': 'n',
    'ш': 'w',
    'щ': 'w',
    'ъ': 'a',
    'ы': 'm',
    'ь': 'a',
    'э': 'e',
    'ю': 'm',
    'я': 'r',
};

export type CharacterMetrics = {
    depth: number;
    height: number;
    italic: number;
    skew: number;
    width: number;
};

export type MetricMap = {
    [string]: number[]
}

/**
 * This function adds new font metrics to default metricMap
 * It can also override existing metrics
 */
export function setFontMetrics(fontName: string, metrics: MetricMap) {
    metricMap[fontName] = metrics;
}

/**
 * This function is a convenience function for looking up information in the
 * metricMap table. It takes a character as a string, and a font.
 *
 * Note: the `width` property may be undefined if fontMetricsData.js wasn't
 * built using `Make extended_metrics`.
 */
export function getCharacterMetrics(
    character: string,
    font: string,
    mode: Mode,
): ?CharacterMetrics {
    if (!metricMap[font]) {
        throw new Error(`Font metrics not found for font: ${font}.`);
    }
    let ch = character.charCodeAt(0);
    let metrics = metricMap[font][ch];
    if (!metrics && character[0] in extraCharacterMap) {
        ch = extraCharacterMap[character[0]].charCodeAt(0);
        metrics = metricMap[font][ch];
    }

    if (!metrics && mode === 'text') {
        // We don't typically have font metrics for Asian scripts.
        // But since we support them in text mode, we need to return
        // some sort of metrics.
        // So if the character is in a script we support but we
        // don't have metrics for it, just use the metrics for
        // the Latin capital letter M. This is close enough because
        // we (currently) only care about the height of the glyph
        // not its width.
        if (supportedCodepoint(ch)) {
            metrics = metricMap[font][77]; // 77 is the charcode for 'M'
        }
    }

    if (metrics) {
        return {
            depth: metrics[0],
            height: metrics[1],
            italic: metrics[2],
            skew: metrics[3],
            width: metrics[4],
        };
    }
}

type FontSizeIndex = 0 | 1 | 2;
export type FontMetrics = {
    cssEmPerMu: number,
    [string]: number,
};

const fontMetricsBySizeIndex: {[FontSizeIndex]: FontMetrics} = {};

/**
 * Get the font metrics for a given size.
 */
export function getGlobalMetrics(size: number): FontMetrics {
    let sizeIndex: FontSizeIndex;
    if (size >= 5) {
        sizeIndex = 0;
    } else if (size >= 3) {
        sizeIndex = 1;
    } else {
        sizeIndex = 2;
    }
    if (!fontMetricsBySizeIndex[sizeIndex]) {
        const metrics = fontMetricsBySizeIndex[sizeIndex] = {
            cssEmPerMu: sigmasAndXis.quad[sizeIndex] / 18,
        };
        for (const key in sigmasAndXis) {
            if (sigmasAndXis.hasOwnProperty(key)) {
                metrics[key] = sigmasAndXis[key][sizeIndex];
            }
        }
    }
    return fontMetricsBySizeIndex[sizeIndex];
}