diff --git "a/augmented_train.csv" "b/augmented_train.csv"
new file mode 100644--- /dev/null
+++ "b/augmented_train.csv"
@@ -0,0 +1,6376 @@
+example_id,content,metadata,tagged_sentence,relation_type,type
+05fdde92-d8af-42ad-963b-9019c69a8ab3,"For a timber frame where the intermediate floor structure breaches the external wall insulation, further insulation of the same thickness as the insulation used in the external wall should be included within the depth of the intermediate floor structure.",{'ID': '163_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For a timber frame where the intermediate floor structure breaches the external wall insulation, further insulation of the same <e1>thickness</e1> as the <e2>insulation</e2> used in the external wall should be included within the depth of the intermediate floor structure.",equal,annotated
+45338082-ca66-418b-8fe1-8f2be926f330_9,,,A <e1>load-bearing structures</e1> of no more than <e2>50</e2> may pass between the stair steps.,less-equal,synthetic
+e43c1e88-be80-42d9-944e-1bf0f0f82479_1,,,Individual flights are: for gradients up to 1:15 not more than <e1>800 millimetres</e1> <e2>design solar load</e2>; for gradients up to 1:12 not more than 5m long.,less-equal,synthetic
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. <e1>heat distribution room</e1>; 4. ventilation unit room; 5. toilet facility <e2>intended for public use</e2>; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",none,annotated
+f034fbd1-7547-425a-8163-513fcac0b66b,The roof structures and joints must be properly inclined and sealed for water drainage.,{'ID': '103_Finnish_Health-Humidity'},The roof structures and <e1>joints</e1> must be properly inclined and <e2>sealed for water drainage</e2>.,necessity,annotated
+aef92227-4c01-4c59-b96d-ce414540606b,"Appliances capable of burning both biomass fuel and fossil fuel the CO2 emission factor and primary energy factor for dua-lfuel appliances should be used, except where the building is in a smoke control area, when the anthracite figure should be used.",{'ID': '63_UK_DocM_V2_AccessAndUseOfBuildings'},"Appliances capable of burning both biomass fuel and fossil fuel the CO2 emission factor and primary energy factor for dua-lfuel appliances should be used, except where the <e1>building</e1> is in a smoke control area, when the <e2>anthracite figure</e2> should be used.",necessity,annotated
+9dd2a0f1-0ff9-4416-8abd-1e6589980ff4_9,,,"If the <e1>total flow rate</e1> of a mechanical ventilation systems air duct is designed to be greater than <e2>(16.66 8.33 V0.4)/(1000 24)</e2>, the outdoor air and exhaust air ducts shall be fitted with shutoff dampers that close automatically when the system shuts down.",greater,synthetic
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab_8,,,"If the <e1>primary energy factor</e1> of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds <e2>10 litres per second per person</e2> of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",greater,synthetic
+2b60007d-59a3-4a18-a184-89e76ee17454,Masonry construction: external or cavity wall insulation should extend below the damp-proof course (where applicable) and be at least the equivalent of one full block height (215mm) below the underside of the floor structure/slab and beyond the depth of the floor insulation.,{'ID': '161_UK_DocL_V1_ConsrvationOfFuelAndPower'},Masonry construction: external or cavity <e1>wall</e1> <e2>insulation</e2> should extend below the damp-proof course (where applicable) and be at least the equivalent of one full block height (215mm) below the underside of the floor structure/slab and beyond the depth of the floor insulation.,part-of,annotated
+f733b7c9-a406-4f5a-b383-9d3f8b70a559,The selection of relevant critical situations for design should be made reflecting the conditions that can reasonably be foreseen during future use.,{'ID': '5_UK_DocA_Structure'},The selection of relevant critical <e1>situations</e1> <e2>for design</e2> should be made reflecting the conditions that can reasonably be foreseen during future use.,selection,annotated
+9ff8b8fd-5361-4c3d-9a7e-7459276c8df7_6,,,The <e1>energy efficiency</e1> must not exceed the individual dwellings <e2>high</e2>.,less-equal,synthetic
+bb9ec292-062b-43c3-8590-856dd5f6b890_4,,,"The building primary energy rate and <e1>domestic hot water circulation heat loss</e1> calculated using the measured air permeability must not be higher than the target primary energy rate and <e2>patterns</e2>, respectively.",less-equal,synthetic
+9ebe07e9-8381-451a-9ab8-701912478b30,The air flow rate of all mechanical ventilation fans should be tested.,{'ID': '210_UK_DocF_V1_Ventilation'},The <e1>air flow rate</e1> of all mechanical ventilation fans should be <e2>tested</e2>.,necessity,annotated
+a5e9c36f-358f-4375-943c-6d5b89c82647,"Any abrupt level differences of over 0.7 metres and any precipices located in the vicinity of common play and recreation areas associated with buildings with more than two dwellings must be indicated by appropriate barriers or suitable planted areas, or outfitted with a base that cushions any fall.",{'ID': '92_Finnish_SafetyOfUse'},"Any abrupt level differences of over 0.7 metres and any precipices located in the vicinity of common play and recreation <e1>areas</e1> associated with <e2>buildings</e2> with more than two dwellings must be indicated by appropriate barriers or suitable planted areas, or outfitted with a base that cushions any fall.",part-of,annotated
+c47598f9-df79-4d77-aba9-8f380342372f,extract air of category 4 shall be conducted to the outdoors through individual extract air ducts.,{'ID': '88_Finnish_Health-IndoorClimateAndVentilation'},<e1>extract air</e1> of category 4 shall be <e2>conducted to the outdoors through individual extract air ducts</e2>.,necessity,annotated
+a235c68f-ae44-4770-b005-4e9d7b659eb7_10,,,All cavity walls should have leaves at least <e1>0.15</e1> <e2>headroom</e2> and cavities at least 50mm wide.,greater-equal,synthetic
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_6,,,Skirtings totalling up to 50mm total thickness and shallow projecting <e1>Cable routes</e1> or casings above <e2>650mm</e2> may be discounted when measuring clear width.,greater,synthetic
+bfdf95da-d422-47cd-83d7-a30a4969f2e6,"If the internal ties must be centred on the supporting line, the minimum value of the tie force, 10 kN, will also be applied to internal ties.",{'ID': '180_Finnish_StabilityOfStructures'},"If the internal ties must be centred on the supporting line, the minimum value of the tie force, 10 kN, will also be applied to <e1>internal</e1> <e2>ties</e2>.",selection,annotated
+99a53f17-48cb-4012-a47b-700761e0983b_8,,,Where a new building which is not a residential building or a mixed-use building has more than 10 parking spaces (a) <e1>10m</e1> of those <e2>space</e2> must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,equal,synthetic
+f6ea9be6-644d-4dc6-8954-d115bdd528c8,"The building emission rate and building primary energy rate submission should be accompanied by a report, signed by a suitably qualified person, detailing how the combined emission factor has been derived.",{'ID': '62_UK_DocM_V2_AccessAndUseOfBuildings'},"The building emission rate and <e1>building primary energy rate</e1> <e2>submission</e2> should be accompanied by a report, signed by a suitably qualified person, detailing how the combined emission factor has been derived.",part-of,annotated
+835d8fad-7a27-4299-aa38-a5b1771a6779_2,,,"In large building complexes, such as retail parks and large sports centres, there should be <e1>300 litres</e1> wheelchair-accessible unisex <e2>seating area</e2> capable of including an adult changing table.",equal,synthetic
+c416d5e5-cb27-414c-b22e-7ed38be54ed1,There must be an automatic fire-extinguishing system that is suitable for its purpose and connected to the emergency centre.,{'ID': '232_Finnish_FireSafety'},There must be an <e1>automatic</e1> <e2>fire-extinguishing system</e2> that is suitable for its purpose and connected to the emergency centre.,selection,annotated
+8364a5f1-f80e-484c-9f38-bffc6f4c1876_11,,,"Where communal parking is provided to blocks of flats, at least <e1>150m2</e1> standard <e2>lifting platform</e2> is provided close to the communal entrance of each core of the block (or to the lift core where the parking bay is internal).",greater-equal,synthetic
+d8066a73-49c2-4e99-825a-b49b9b2ba67d_4,,,A landing measuring at least <e1>0.06 m2</e1> in <e2>fire compartmenting requirement</e2> must be reserved in front of and behind a door located in an exit route.,greater-equal,synthetic
+8bb9aee2-a950-4a65-a715-287035906789,"Spaces of a non-residential building and common spaces of a residential building as well as the fixtures, fittings and fixed equipment in them shall be suitable for persons with mobility and functional impairment.",{'ID': '27_Finnish_Accessibility'},"Spaces of a non-residential building and common spaces of a residential building as well as the <e1>fixtures, fittings and fixed equipment</e1> in them shall be <e2>suitable for persons with mobility and functional impairment</e2>.",necessity,annotated
+76bf63bd-30f4-440d-81a0-61ca16170f70_8,,,Control should be maximised and heat gain to uninsulated pipes should only be permitted where the <e1>sections</e1> is less than <e2>E</e2> of the total load.,less,synthetic
+2be01bf1-2cd9-4982-8778-ba0afe835580,"If fans and background ventilators are fitted in the same room, they should be at least 500mm apart.",{'ID': '88_UK_DocF_V1_Ventilation'},"If fans and background ventilators are fitted in the same room, <e1>they</e1> should be <e2>at least 500mm apart</e2>.",necessity,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_10,,,"The free opening of the vertical hatch or window of an emergency exit must be at least <e1>m3/(hm2) at 50Pa</e1> in <e2>product certificate</e2> and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",greater-equal,synthetic
+a15ee053-da1e-44cd-bdd9-76cdcb68eaee,"Whenever the building is moved to a new location, in which its intended time of use is less than two years, these calculations can be provided as evidence that the energy efficiency requirements are met.",{'ID': '87_UK_DocM_V2_AccessAndUseOfBuildings'},"Whenever the <e1>building</e1> is <e2>moved to a new location, in which its intended time of use is less than two years</e2>, these calculations can be provided as evidence that the energy efficiency requirements are met.",selection,annotated
+05864826-21ef-4ae7-9af8-2aaeffc7267a,Modular and portable buildings with a planned service life of more than two years but with an intended time of use in a single location of less than two years should be shown to comply with the energy efficiency requirements.,{'ID': '83_UK_DocM_V2_AccessAndUseOfBuildings'},Modular and portable buildings with a planned <e1>service life</e1> of more than two years but with an intended time of use in a single location of less than <e2>two years</e2> should be shown to comply with the energy efficiency requirements.,none,annotated
+cea6e7bd-c494-4146-9f81-3fd2ed64a2a6_8,,,The <e1>heat loss</e1> of the floor surface in the seating area and access route may not exceed <e2>E</e2>.,less-equal,synthetic
+fa90c179-d32c-412b-a7d6-a515cc91dbdb,The structure of the exterior wall against the ground must be waterproofed or isolated against water pressure or a structurally managed water removal system allowing the cellar wall to dry in an outward direction must be used to prevent moisture from the surrounding ground and storm water from penetrating the wall structure.,{'ID': '86_Finnish_Health-Humidity'},The structure of the <e1>exterior wall</e1> <e2>against the ground</e2> must be waterproofed or isolated against water pressure or a structurally managed water removal system allowing the cellar wall to dry in an outward direction must be used to prevent moisture from the surrounding ground and storm water from penetrating the wall structure.,selection,annotated
+8fcdc238-3c30-4659-9303-1b126a39b2cd_7,,,"The design solar load should be <e1>leading to room spaces of a non-residential building as well as to residential rooms of a residential building, necessary spaces serving residence and spaces serving the use of the building</e1> by at least <e2>300mm</e2>.",greater-equal,synthetic
+cea6e7bd-c494-4146-9f81-3fd2ed64a2a6_1,,,The <e1>vicinity</e1> of the floor surface in the seating area and access route may not exceed <e2>600kg/m3</e2>.,less-equal,synthetic
+4abb3268-3ba6-47e8-a8b7-4676dbaa9a16,"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide all means of escape routes with a minimum clear headroom of 2m, except in doorways.",{'ID': '28_UK_DocK_ProtectionFromFalling'},"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide all <e1>means</e1> of <e2>escape routes</e2> with a minimum clear headroom of 2m, except in doorways.",part-of,annotated
+1ebce0c9-705c-47ee-8429-e83cfbed72db,"All walls, ducts and boxings to every WC/cloakroom, bath and shower room are strong enough to support grab rails, seats and other adaptations that could impose a load of 1.5kN/m2.",{'ID': '103_UK_DocM_V1_AccessAndUseOfBuildings'},"All <e1>walls</e1>, ducts and boxings to every WC/cloakroom, bath and shower room are <e2>strong enough to support grab rails, seats and other adaptations that could impose a load of 1.5kN/m2</e2>.",necessity,annotated
+b02f9b87-d934-4c2f-8a59-b3b8c0a7be17,"Instantaneous or snapshot CO2 readings can be misleading, so several measurements should be taken throughout the day.",{'ID': '124_UK_DocF_V2_Ventilation'},"Instantaneous or snapshot CO2 readings can be misleading, so <e1>several</e1> <e2>measurements</e2> should be taken throughout the day.",selection,annotated
+56517433-cf40-4b88-a9d4-18e61e0e9993_6,,,"In addition, on both sides of the toilet seat there shall be a <e1>house</e1> of at least <e2>2</e2>.",greater-equal,synthetic
+2afa8bba-b5ad-4e12-bc27-4beea3fd09b2,The normal relationship between the dimensions of the rise and going is: twice the rise plus the going (2R G) equals between 550mm and 700mm.,{'ID': '19_UK_DocK_ProtectionFromFalling'},The normal relationship between the dimensions of the <e1>rise</e1> and going is: <e2>twice the rise plus the going (2R G)</e2> equals between 550mm and 700mm.,none,annotated
+8aad11d6-bd81-4a57-bd73-7c1319a76494,"Where on-site electricity generation and storage is installed, such as photovoltaic panels or battery storage, systems should be an appropriate size for the site, available infrastructure and on-site energy demand.",{'ID': '331_UK_DocM_V2_AccessAndUseOfBuildings'},"Where <e1>on-site electricity generation</e1> and storage is installed, such as <e2>photovoltaic panels</e2> or battery storage, systems should be an appropriate size for the site, available infrastructure and on-site energy demand.",part-of,annotated
+9c2051ae-9878-4772-9471-bc5b8a28c3ae,"For mechanical ventilation systems, fan units should be appropriately sized so that fans operating in normal background ventilation mode are not overly noisy, taking into consideration the use and likely background level of noise from other sources.",{'ID': '23_UK_DocF_V2_Ventilation'},"For <e1>mechanical</e1> <e2>ventilation systems</e2>, fan units should be appropriately sized so that fans operating in normal background ventilation mode are not overly noisy, taking into consideration the use and likely background level of noise from other sources.",selection,annotated
+2fad9e0f-fa0d-4a6b-9c63-152ef8828c4d_2,,,An upstand built on site should not exceed a <e1>value</e1> of <e2>1</e2>.,less-equal,synthetic
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_4,,,Skirtings totalling up to 50mm total thickness and shallow projecting ducts or <e1>skylights</e1> above <e2>four</e2> may be discounted when measuring clear width.,greater,synthetic
+e21fa967-934e-4a29-a66d-252fdbbf928f_2,,,"If the parasitic energy use is unknown, an <e1>total extract air flow</e1> of <e2>35 mg/m3 (30 ppm)</e2> should be made for any control system.",equal,synthetic
+81f14fc1-af5d-45e8-8725-94d2510e4701,"A dwelling that is intended for service housing or supported housing of a person with mobility and functional impairment shall, irrespective of the number of storeys in the building, have a turning  space  with  a  diameter  of  at  least  1,500  millimetres  in  the  hallway  and  kitchen.",{'ID': '29_Finnish_Accessibility'},"A dwelling that is intended for service housing or supported housing of a person with mobility and functional impairment shall, irrespective of the number of storeys in the building, have a turning space with a <e1>diameter</e1> of at least <e2>1,500 millimetres</e2> in the hallway and kitchen.",greater-equal,annotated
+e505b13c-7b62-4857-aa2d-544dc986e9c0,"For dwellings, for external tapered steps and stairs that are part of the building the going of each step should be a minimum of 280mm.",{'ID': '18_UK_DocK_ProtectionFromFalling'},"For dwellings, for external tapered <e1>steps</e1> and stairs that are part of the building the going of each step should be a minimum of <e2>280mm</e2>.",none,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_6,,,"If the air flows of <e1>fire compartmenting requirement</e1> 1 and <e2>1,200 MJ/m2</e2> are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+0da52584-1b37-48b5-840f-3795ae695275_2,,,"the minimum clear dimensions of the platform are: <e1>1,000 millimetres</e1> <e2>layers</e2> and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.",equal,synthetic
+df122091-ca53-4134-98a3-47779c06f9df,The index terminal flow rate should be set with the terminal fully open and all other terminals should be adjusted to achieve the required flows at each terminal.,{'ID': '198_UK_DocF_V1_Ventilation'},The index terminal flow rate should be set with the terminal fully open and all <e1>other</e1> <e2>terminals</e2> should be adjusted to achieve the required flows at each terminal.,selection,annotated
+ef561e39-db90-462c-8dde-15fbeae954e5_4,,,A cube with <e1>Ventilation</e1> of no more than <e2>two </e2> may pass between the upper edge of the barrier and the protective part.,less-equal,synthetic
+2a256a9c-0b8a-4acf-87e1-86a5857f36a3,"Where a driveway forms all, or part of, the approach route, an additional allowance of at least 900mm wide should be provided so that a wheelchair user can pass a parked car.",{'ID': '17_UK_DocM_V1_AccessAndUseOfBuildings'},"Where a <e1>driveway</e1> <e2>forms all, or part of, the approach route</e2>, an additional allowance of at least 900mm wide should be provided so that a wheelchair user can pass a parked car.",selection,annotated
+81f14fc1-af5d-45e8-8725-94d2510e4701_9,,,"A dwelling that is intended for service housing or supported housing of a person with mobility and functional impairment shall, irrespective of the number of storeys in the building, have a turning space with a <e1>width</e1> of at least <e2>30% load</e2> in the hallway and kitchen.",greater-equal,synthetic
+53bb982d-5260-4a69-a6dd-71e4f074e676_4,,,The <e1>travel</e1> of standing rows must be at least <e2>10 kN</e2>.,greater-equal,synthetic
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_8,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for <e1>length</e1> 1 and <e2>300 litres</e2> if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",equal,synthetic
+e15250c0-1279-4d29-a1ec-31560b045007_10,,,<e1>trigeneration scheme</e1> of basement storeys must not be connected to fire and smoke-proof <e2>extension</e2>.,not-part-of,synthetic
+60024014-cb6a-4a53-9b12-9497e0a1e5e8,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",{'ID': '85_Finnish_Health-IndoorClimateAndVentilation'},"Extract air from <e1>toilets</e1>, washrooms and <e2>cleaning spaces</e2> may be conducted to vertical ducts for extract air categories 1 and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",none,annotated
+c384013b-c40f-4925-acbe-465e1ca5bc13_3,,,<e1>0.8 metres</e1> <e2>pressure gauge</e2> per detail should be recorded.,equal,synthetic
+382038df-4d45-443d-a52a-8a83e6048d1e,At least 30% of the ties shall be located in the immediate vicinity of the grid lines of the columns and the walls.,{'ID': '175_Finnish_StabilityOfStructures'},At least 30% of the <e1>ties</e1> shall be <e2>located in the immediate vicinity of the grid lines of the columns and the walls</e2>.,necessity,annotated
+8364a5f1-f80e-484c-9f38-bffc6f4c1876_4,,,"Where communal parking is provided to blocks of flats, at least <e1>50mm</e1> standard <e2>Cable routes</e2> is provided close to the communal entrance of each core of the block (or to the lift core where the parking bay is internal).",greater-equal,synthetic
+c0a6d35c-cc20-428b-941d-c3e3e6365c74_7,,,"In a tier that is uninterrupted by cross-gangways, and where the <e1>sections</e1> exceeds <e2>2.4m</e2>, use a maximum number of steps of 40.",greater,synthetic
+8aad11d6-bd81-4a57-bd73-7c1319a76494,"Where on-site electricity generation and storage is installed, such as photovoltaic panels or battery storage, systems should be an appropriate size for the site, available infrastructure and on-site energy demand.",{'ID': '331_UK_DocM_V2_AccessAndUseOfBuildings'},"Where on-site electricity generation and <e1>storage</e1> is installed, such as photovoltaic panels or battery storage, <e2>systems</e2> should be an appropriate size for the site, available infrastructure and on-site energy demand.",selection,annotated
+a4dc06ab-99c3-4c8b-b295-eb3e6a64320a_8,,,"The free <e1>load capacity</e1> from the ground or from the surface of a driveway or walkway of the lower edge of a structural element, device or equipment protruding from the building, such as a balcony, bay window, sign, lighting device or awning, must be at least <e2>1800mm</e2>, unless the area is protected so as to prevent the danger of collision.",greater-equal,synthetic
+4094b859-b3b4-4035-94cd-8cf47ccbd801_2,,,The <e1>frequency</e1> is at least <e2>(16.66 8.33 V0.4)/(1000 24)</e2>.,greater-equal,synthetic
+72e7ed0c-9e73-46b2-a919-20f3fea337fd_5,,,"An <e1>outdoor air and exhaust air ducts</e1> with a potentially flammable or explosive atmosphere must not be located in a <e2>eaves</e2> where there are dwellings, accommodation premises, institutions or assembly and business premises.",not-part-of,synthetic
+37f01a2c-b944-45a2-a7f4-140d8c03d7ac,"After rebating, frame components should retain at least 32mm of timber.",{'ID': '29_UK_DocQ_Security_Dwellings'},"After rebating, <e1>frame components</e1> should retain at least 32mm of <e2>timber</e2>.",necessity,annotated
+4a82f789-a98a-4379-9b81-2a20cfba6c87,"If the internal ties must be centred on the supporting line, the minimum value of the tie force, 70 kN, will also be applied to internal ties.",{'ID': '179_Finnish_StabilityOfStructures'},"If the internal ties must be centred on the supporting line, the minimum value of the <e1>tie force</e1>, 70 kN, will also be applied to internal <e2>ties</e2>.",part-of,annotated
+536b172d-ccd1-479a-8136-6ee05db0f264_8,,,"Where pipework is above ground, the performance of the pipe <e1>hot water storage vessel</e1> should be at least as high as the <e2>extends</e2> of pipework in the buried part of the system.",greater-equal,synthetic
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_8,,,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and <e1>two years</e1> in <e2>instantaneous carbon monoxide concentration</e2>; however, the sum of these must be at least 1,500 millimetres.",greater-equal,synthetic
+164122ed-c7ac-4cf8-8a54-3d56c144f78d,"In general, the findings indicate that there should be at least the same number of WCs (for women) as urinals (for men) and for some building types, e.g. large retail buildings, at least twice as many.",{'ID': '172_UK_DocM_V2_AccessAndUseOfBuildings'},"In general, the findings indicate that there should be at least the same <e1>number</e1> of WCs (for women) as <e2>urinals (for men)</e2> and for some building types, e.g. large retail buildings, at least twice as many.",selection,annotated
+c0abe869-e87e-4e66-a8ca-8578a338b07a,"Where a building automation and control system is installed, its control capabilities should be appropriate for the building, its expected usage and the building services specification.",{'ID': '329_UK_DocM_V2_AccessAndUseOfBuildings'},"Where a building automation and control system is installed, its <e1>control capabilities</e1> should be <e2>appropriate for the building, its expected usage and the building services specification</e2>.",necessity,annotated
+a477ee34-044e-443b-a95f-fbb1da913c38,"Changing places toilets, facilities designed for individuals with complex and multiple impairments who may require the assistance of up to two assistants, should be provided in addition to any wheelchair-accessible accommodation in separate-sex toilet washrooms, wheelchair-accessible unisex toileting facilities and baby changing facilities.",{'ID': '160_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Changing places toilets</e1>, facilities designed for individuals with complex and multiple impairments who may require the assistance of up to two assistants, should be provided in addition to any wheelchair-accessible <e2>accommodation</e2> in separate-sex toilet washrooms, wheelchair-accessible unisex toileting facilities and baby changing facilities.",necessity,annotated
+66249fda-33bf-4d93-8bf9-53fb82ad0e95,"The driveway and parking area at a plot or building site must be separated from pedestrian, play and recreation areas.",{'ID': '87_Finnish_SafetyOfUse'},"The driveway and <e1>parking area</e1> at a <e2>plot</e2> or building site must be separated from pedestrian, play and recreation areas.",part-of,annotated
+33ed3038-99a6-4b2d-906a-a1db21f2d898,"For heating systems in new dwellings, or when a heat generator such as a boiler is replaced in an existing dwelling, each room should be provided with thermostatic room controls.",{'ID': '250_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For heating systems in new dwellings, or when a heat generator such as a boiler is replaced in an <e1>existing</e1> dwelling, each room should be provided with <e2>thermostatic room controls</e2>.",none,annotated
+eccd4f77-ef4a-41fd-a22a-620c84fdddd4_10,,,There is a minimum of <e1>01:20:00</e1> of worktop to at least <e2>instantaneous carbon monoxide concentration</e2> of the oven and fridge or fridge freezer where this is taller than the worktop height (or to one side of a pair of tall appliances where they are located together at the end of a run).,greater-equal,synthetic
+0fdce0b1-7992-401f-aa84-ad7f2acca23d,Cavity walls: the inner block leaf mortar joint should be fully filled and pointed within the cavity.,{'ID': '184_UK_DocL_V1_ConsrvationOfFuelAndPower'},Cavity walls: the inner block leaf <e1>mortar joint</e1> should be <e2>fully filled</e2> and pointed within the cavity.,necessity,annotated
+7f3f59a4-fc7e-4b14-8074-384f6cacf548_10,,,"The <e1>total useful floor area</e1> of a barrier in a dwellings indoor areas may, however, be at least <e2>1.3 seconds</e2> if the drop is less than three metres.",greater-equal,synthetic
+99a53f17-48cb-4012-a47b-700761e0983b_10,,,Where a new building which is not a residential building or a mixed-use building has more than 10 parking spaces (a) <e1>50 m2</e1> of those <e2>input charge</e2> must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,equal,synthetic
+c384013b-c40f-4925-acbe-465e1ca5bc13_6,,,<e1>60 persons</e1> <e2>staircases</e2> per detail should be recorded.,equal,synthetic
+ac2db7e5-ea0b-4a14-9623-eba6300272a7,A new dwelling must be built to a minimum standard of total energy performance.,{'ID': '46_UK_DocL_V1_ConsrvationOfFuelAndPower'},A new <e1>dwelling</e1> must be <e2>built to a minimum standard of total energy performance</e2>.,necessity,annotated
+e3128ebd-be79-48f2-93b5-7806c9a9026a,"Constructions  behind  surfaces  exposed  to  running  water,  repetitious splash water or water condensation must be waterproofed.",{'ID': '110_Finnish_Health-Humidity'},"<e1>Constructions</e1> <e2>behind surfaces exposed to running water, repetitious splash water or water condensation</e2> must be waterproofed.",selection,annotated
+43e26628-8b62-4cc6-91e2-284335df1564_1,,,"In rooms used for sleeping or rest, the <e1>heat recovery</e1> may not exceed <e2>01:08:00</e2>.",less-equal,synthetic
+0cafda73-ee3a-4a99-a224-2d142de63618,"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",{'ID': '238_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, <e1>emitters</e1> and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that <e2>meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower</e2>.",none,annotated
+84cd76d7-e5d0-4f39-94bc-0236c65d533a_8,,,"in residential buildings of not more than two storeys, one exit of no less than <e1>16/01/2023 00:00</e1> in <e2>reference value</e2> is permitted.",greater-equal,synthetic
+12f51746-1632-4628-9d8a-98dcf58ed9fc,Doors must be capable of opening outwards - in wheelchair adaptable bathrooms the door may open inwards providing that the door can be easily rehung to open outwards (e.g. door stops are planted and easily moved).,{'ID': '116_UK_DocM_V1_AccessAndUseOfBuildings'},Doors must be capable of opening outwards - in wheelchair adaptable <e1>bathrooms</e1> the <e2>door</e2> may open inwards providing that the door can be easily rehung to open outwards (e.g. door stops are planted and easily moved).,part-of,annotated
+f72a98f3-b7d2-4633-b244-0d7242dfb0c9_9,,,Every single bedroom has a minimum <e1>temperature</e1> of <e2>28 metres</e2> and is at least 2.4m wide.,greater-equal,synthetic
+f9de28ac-45bb-4400-9d9f-8afee73bd2e3,The number of appliances should not exceed one per 100m2 of dwelling floor area.,{'ID': '273_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>number of appliances</e1> should not exceed one per 100m2 of <e2>dwelling</e2> floor area.,none,annotated
+2de867fe-80e7-4617-ad18-36225dd45ab1_8,,,Hinged or pivot windows with an <e1>cold side</e1> of less than <e2>450mm</e2> are not suitable for purge ventilation.,less,synthetic
+2633c957-07b4-4caa-a9d6-5acbac16b0b0_2,,,NOTE: Linear interpolation should be used to determine efficiencies between manufacturers declared efficiencies at 30 and <e1>55 degrees Celsius</e1> <e2>thresholds</e2>.,equal,synthetic
+2fad9e0f-fa0d-4a6b-9c63-152ef8828c4d_5,,,An upstand built on site should not exceed a <e1>total supply air flow</e1> of <e2>0.05</e2>.,less-equal,synthetic
+eeb4239f-3819-475c-ad20-756bed80c4ff_0,,,"In reference heat loss calculations, the value used as the <e1>type and quality</e1> of the buildings ventilation system shall be <e2>1m2</e2>.",equal,synthetic
+a9944ed0-7168-4ec7-b761-0641e3e3228b,The sewerage system shall be equipped with cleanouts that are easy to handle and lockable in both horizontal and vertical sewers.,{'ID': '157_Finnish_Health-WaterAndSewerage'},The <e1>sewerage system</e1> shall be equipped with <e2>cleanouts</e2> that are easy to handle and lockable in both horizontal and vertical sewers.,necessity,annotated
+d925c189-860a-4fcb-ae88-d1cf8cc14fb8_2,,,"The <e1>indoor and outdoor conditions</e1> of steps in covered or heated outdoor staircases must be no less than <e2>0.7</e2>, and the riser may be no more than 160 millimetres.",greater-equal,synthetic
+bfdf95da-d422-47cd-83d7-a30a4969f2e6,"If the internal ties must be centred on the supporting line, the minimum value of the tie force, 10 kN, will also be applied to internal ties.",{'ID': '180_Finnish_StabilityOfStructures'},"If the internal ties must be <e1>centred on the supporting line</e1>, the minimum value of the tie force, <e2>10 kN</e2>, will also be applied to internal ties.",none,annotated
+c0a6d35c-cc20-428b-941d-c3e3e6365c74_3,,,"In a tier that is uninterrupted by cross-gangways, and where the <e1>quality of the installation</e1> exceeds <e2>20</e2>, use a maximum number of steps of 40.",greater,synthetic
+5e7d4831-4ec8-48f9-9e60-0422fcc1eae4,"When replacing an existing system, the installed generation capacity of the new system should be no less than that of the existing system, except where a smaller system can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",{'ID': '344_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When replacing an <e1>existing</e1> system, the installed generation capacity of the new <e2>system</e2> should be no less than that of the existing system, except where a smaller system can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",none,annotated
+703e5c71-bd54-4267-acf4-fa7db1e70d49,"Any sound system in an auditorium, a restaurant, a conference facility, a facility for festive occasions, a teaching facility or other similar assembly facility or a public service facility shall have an induction loop or a similar sound transmission system.",{'ID': '67_Finnish_Accessibility'},"Any <e1>sound system</e1> in an auditorium, a restaurant, a conference facility, a facility for festive occasions, a teaching facility or other similar assembly facility or a <e2>public service facility</e2> shall have an induction loop or a similar sound transmission system.",part-of,annotated
+e3b85ad6-6132-40d7-86f8-3cc5d44eb12c_0,,,<e1>100 millimetres</e1> <e2>requirements</e2> should be close to an accessible bathroom suitable for a wheelchair user.,equal,synthetic
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab_11,,,"If the <e1>room temperature</e1> of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds <e2>0.07</e2> of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",greater,synthetic
+88e23b46-22d9-4be6-87b7-40541f7995a9_0,,,"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the <e1>locations</e1> exceeds <e2>twice the rise plus the going (2R G)</e2>; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",greater,synthetic
+4d80c4d1-08ee-481a-9f9c-e9151ce1094d,"The area of windows, roof windows, rooflights and doors should not exceed 25 of the total floor area of the dwelling.",{'ID': '421_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The <e1>area</e1> of windows, roof windows, rooflights and <e2>doors</e2> should not exceed 25 of the total floor area of the dwelling.",part-of,annotated
+f5a71c7b-e852-40f2-8f88-91cda7902a7e_2,,,"If a new building has a space heating or airconditioning system with an <e1>sales counter</e1> greater than <e2>270 millimetres</e2>, a building automation and control system should be installed.",greater,synthetic
+85745724-aa09-4cdd-ad17-3c50ea2b99a1,"Where sanitary facilities are wheelchair accessible, basins and sinks should be wall hung (typically with their rim 770-850mm above finished floor level) and the clear zone beneath basins, services and pedestals is maximised to enable wheelchair users to approach.",{'ID': '105_UK_DocM_V1_AccessAndUseOfBuildings'},"Where <e1>sanitary facilities</e1> are <e2>wheelchair accessible</e2>, basins and sinks should be wall hung (typically with their rim 770-850mm above finished floor level) and the clear zone beneath basins, services and pedestals is maximised to enable wheelchair users to approach.",selection,annotated
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_11,,,"The wall ties should have a <e1>air-tightness</e1> of <e2>32mm</e2> and a vertical spacing of 450mm, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",equal,synthetic
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_10,,,Skirtings totalling up to 50mm total thickness and shallow projecting ducts or <e1>hot water ring duct</e1> above <e2>44mm</e2> may be discounted when measuring clear width.,greater,synthetic
+3cc36bc1-da6a-4ebc-8d2f-2f5b6c4349b1,Supply temperature control should be provided via a variable set point with outdoor temperature compensation.,{'ID': '307_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Supply temperature control</e1> should be <e2>provided via a variable set point with outdoor temperature compensation</e2>.,necessity,annotated
+a235c68f-ae44-4770-b005-4e9d7b659eb7,All cavity walls should have leaves at least 90mm thick and cavities at least 50mm wide.,{'ID': '35_UK_DocA_Structure'},All cavity walls should have leaves at least 90mm thick and <e1>cavities</e1> at least 50mm <e2>wide</e2>.,part-of,annotated
+ca1bbebb-fe4e-48d8-8cdf-eef13cd79ee9,The dwelling emission rate must not exceed the individual dwellings target emission rate.,{'ID': '65_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>dwelling emission rate</e1> must not exceed the individual dwellings <e2>target emission rate</e2>.,less-equal,annotated
+33ed3038-99a6-4b2d-906a-a1db21f2d898,"For heating systems in new dwellings, or when a heat generator such as a boiler is replaced in an existing dwelling, each room should be provided with thermostatic room controls.",{'ID': '250_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For heating systems in new <e1>dwellings</e1>, or when a heat generator such as a boiler is replaced in an existing dwelling, <e2>each</e2> room should be provided with thermostatic room controls.",none,annotated
+76acc6bd-50c0-4f3f-b015-42e171ec6ce7_7,,,<e1>eight per cent</e1> <e2>volume systems</e2> must be installed.,equal,synthetic
+efd2d371-97de-4d5e-af06-e404ff71f316,The impact of the ground and crawl space on heat loss shall be taken into account in heat loss calculations.,{'ID': '91_Finnish_EnergyEfficiency'},The <e1>impact</e1> of the ground and crawl space on heat loss shall be <e2>taken into account in heat loss calculations</e2>.,necessity,annotated
+8cef7dc5-2d76-4dd8-80c5-6861b11a8f6f_2,,,"Where the work concerns a building containing more than <e1>25 decibels</e1> <e2>controls</e2>, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",greater,synthetic
+fb1da22f-8ddb-4399-b441-64dca68da9af,"If a lift or other device for moving between levels is installed in the exit of an existing building, the dwellings exit may be no less than 850 millimetres wide.",{'ID': '218_Finnish_FireSafety'},"If a <e1>lift</e1> or other device for <e2>moving between levels</e2> is installed in the exit of an existing building, the dwellings exit may be no less than 850 millimetres wide.",none,annotated
+23db27ac-b594-4b26-883d-922d713d382a,"When installing or renovating thermal elements, the element being installed should be draught-proofed and airleakage gaps should be filled.",{'ID': '161_UK_DocM_V2_AccessAndUseOfBuildings'},"When installing or renovating thermal elements, the <e1>element</e1> being installed should be <e2>draught-proofed</e2> and airleakage gaps should be filled.",necessity,annotated
+8efb6108-e49e-4d64-a1e4-22e3f9128b17,"When calculating the reference heat loss of a building, the value of 2.0 m3/(h m2) shall be used as the reference value for the air leakage rate figure for the building envelope.",{'ID': '136_Finnish_EnergyEfficiency'},"When calculating the reference heat loss of a building, the value of 2.0 m3/(h m2) shall be used as the reference value for the air leakage rate figure for the <e1>building</e1> <e2>envelope</e2>.",part-of,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",{'ID': '83_Finnish_SafetyOfUse'},"The free opening of the vertical hatch or window of an emergency exit must be at least <e1>600 millimetres</e1> in <e2>height</e2> and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",greater-equal,annotated
+d925c189-860a-4fcb-ae88-d1cf8cc14fb8_11,,,"The tread of steps in covered or heated outdoor staircases must be no less than 300 millimetres, and the <e1>Length</e1> may be no more than <e2>1</e2>.",less-equal,synthetic
+bde1697a-20c9-4f15-a63c-5be323a058c1_10,,,Any connection of <e1>1m3/s</e1> or more <e2>projects</e2> to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,greater-equal,synthetic
+993e54cc-49c3-43cb-995e-1a951c93c775_9,,,"When a warning sign is not posted, the areas shall be designed to an axle load Qk and also to an <e1>topography</e1> equal to <e2>3.3m</e2>.",equal,synthetic
+77f993c6-dff1-4f9a-8f66-73221d3cbaff_9,,,"If the dwelling only has <e1>0.5 kN/m2</e1> <e2>Manual reset</e2>, a minimum ventilation rate of 13l/s should be used.",equal,synthetic
+a86b58e8-046f-44b7-8e1b-00c876c8c647,"Parapets in categories A to E and panel parts of walls acting as parapets, as well as their fasteners, shall be designed to the concentrated load Qk = 0.3 kN acting on a random spot.",{'ID': '30_Finnish_StabilityOfStructures'},"<e1>Parapets</e1> in categories A to E and panel parts of walls acting as parapets, as well as their fasteners, shall be <e2>designed to the concentrated load Qk = 0.3 kN acting on a random spot</e2>.",necessity,annotated
+7f3f59a4-fc7e-4b14-8074-384f6cacf548_11,,,"The height of a barrier in a dwellings indoor areas may, however, be at least 0.9 metres if the <e1>gradient</e1> is less than <e2>ten millimetres</e2>.",less,synthetic
+10e66a84-25db-40a0-87d5-6297d0732fe4,The shutoff valves shall be located: 1) at each house; 2) at each apartment; 3) in vertical service pipes; 4) on both sides of devices installed in the service pipes; 5) before a device or fixture that is connected to the connector pipe;  6) on both sides of the water meters.,{'ID': '93_Finnish_Health-WaterAndSewerage'},The shutoff valves shall be located: 1) at each house; 2) at each apartment; 3) in vertical service pipes; 4) on both sides of devices installed in the service pipes; 5) before a device or <e1>fixture</e1> that is connected to the <e2>connector pipe</e2>; 6) on both sides of the water meters.,part-of,annotated
+3724fd47-22f7-432c-81a2-1abcb95c7df2,"The total number of ventilators installed in a dwellings habitable rooms and kitchens should be no fewer than five, except in one bedroom properties, where there should be no fewer than four.",{'ID': '96_UK_DocF_V1_Ventilation'},"The <e1>total number of ventilators</e1> installed in a dwellings habitable rooms and kitchens should be no fewer than five, except in <e2>one</e2> bedroom properties, where there should be no fewer than four.",none,annotated
+7e34700e-92de-4b00-a820-f4085a2e186c_6,,,"If the free gap between facing walls of adjacent glazed balconies or the <e1>energy consumption</e1> of the wall to the window of an adjacent fire compartment is less than <e2>1,000 millimetres</e2>, the wall in question must be class EI 15.",less,synthetic
+6c789809-b1b8-429a-8fe2-8ce16f8a4b54,Air flows in the continuous working area of a parking garage for motor vehicles shall be designed so that the instantaneous carbon monoxide concentration does not exceed 7 mg/m3 (6 ppm).,{'ID': '62_Finnish_Health-IndoorClimateAndVentilation'},<e1>Air flows</e1> in the continuous <e2>working area</e2> of a parking garage for motor vehicles shall be designed so that the instantaneous carbon monoxide concentration does not exceed 7 mg/m3 (6 ppm).,part-of,annotated
+fdd9f39e-e397-4172-b4da-3d213a30f987,On-site electricity generation should be provided with automated controls that support the design of the system and the intended use.,{'ID': '335_UK_DocM_V2_AccessAndUseOfBuildings'},On-site electricity generation should be provided with <e1>automated</e1> <e2>controls</e2> that support the design of the system and the intended use.,selection,annotated
+7577d9f7-9f3c-4d3b-b8d9-da31d3e1b201,"For example, glare and reflections from shiny surfaces, and large repeating patterns, should be avoided in spaces where visual acuity is critical as they will hamper communication for people with impaired vision, and those who lip read or use sign language.",{'ID': '150_UK_DocM_V2_AccessAndUseOfBuildings'},"For example, <e1>glare and reflections</e1> from shiny surfaces, and large repeating patterns, should be <e2>avoided in spaces where visual acuity is critical as they will hamper communication for people with impaired vision, and those who lip read or use sign language</e2>.",necessity,annotated
+b63dcef6-1840-4e9e-ad51-f8fc481fe856,"The wall ties should have a horizontal spacing of 900mm and a vertical spacing of 450mm, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",{'ID': '36_UK_DocA_Structure'},"The wall ties should have a horizontal spacing of 900mm and a <e1>vertical spacing</e1> of <e2>450mm</e2>, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",equal,annotated
+6c789809-b1b8-429a-8fe2-8ce16f8a4b54_3,,,Air flows in the continuous working area of a parking garage for motor vehicles shall be designed so that the <e1>shape</e1> does not exceed <e2>ten millimetres</e2>.,less-equal,synthetic
+bb9ec292-062b-43c3-8590-856dd5f6b890,"The building primary energy rate and building emission rate calculated using the measured air permeability must not be higher than the target primary energy rate and target emission rate, respectively.",{'ID': '357_UK_DocM_V2_AccessAndUseOfBuildings'},"The <e1>building primary energy rate</e1> and building emission rate calculated using the measured air permeability must not be higher than the <e2>target primary energy rate</e2> and target emission rate, respectively.",less-equal,annotated
+3724fd47-22f7-432c-81a2-1abcb95c7df2_4,,,"The total number of ventilators installed in a dwellings habitable rooms and kitchens should be no fewer than five, except in one bedroom <e1>residential block of flats</e1>, where there should be no fewer than <e2>1,500  millimetres</e2>.",greater-equal,synthetic
+9027959e-efc1-4d32-acbe-e0775d40f001_3,,,"The morticed bolts should have a minimum <e1>operation</e1> of <e2>180 millimetres</e2>, should be at least 100mm from the top and bottom corners of the door, and should avoid any door construction joints.",greater-equal,synthetic
+09b2a395-5293-4b7d-82d4-5312482d59e9_5,,,"Door entry controls, where provided, are mounted <e1>1.3 seconds</e1> <e2>SEER</e2> finished ground level, and at least 300mm away from any projecting corner.",equal,synthetic
+70760393-8139-47e8-a329-87da3a477396,Under-floor heating systems intended for intermittent or cyclical operation and/or installed over unheated rooms should be separated from the structural floor by a layer of insulation with a thermal resistance of at least 1.25(m2K)/W.,{'ID': '304_UK_DocL_V1_ConsrvationOfFuelAndPower'},Under-floor <e1>heating systems</e1> intended for intermittent or cyclical operation and/or installed over unheated rooms should be <e2>separated from the structural floor by a layer of insulation with a thermal resistance of at least 1.25(m2K)/W</e2>.,necessity,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_5,,,"The free opening of the vertical hatch or window of an emergency exit must be at least <e1>190 kN</e1> in <e2>travel</e2> and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",greater-equal,synthetic
+793cb939-b3d9-46eb-ae65-71a4d5c8031b_6,,,Where the parking is within the private curtilage of the dwelling (but not within a carport or garage) at least one space is a standard parking bay that can be <e1>exceptional circumstances</e1> to <e2>220 millimetres</e2>.,less-equal,synthetic
+511c1a7f-08b9-48ec-aea6-9b749fdf31a1_11,,,"A non-residential building shall, considering the intended use and functional units of the building and distances in the building, have an <e1>90mm</e1> of appropriately located <e2>car park</e2> which are suitable for users of wheelchairs and walking frames with wheels.",equal,synthetic
+26f33f06-e967-4d55-9e73-30990f52ac82,"Loft hatches: where the roof is insulated at ceiling level, hatches should be suitably designed and installed to ensure optimum airtightness.",{'ID': '189_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Loft hatches: where the <e1>roof</e1> is insulated at ceiling level, <e2>hatches</e2> should be suitably designed and installed to ensure optimum airtightness.",part-of,annotated
+f3bd99b4-7ea5-4968-af10-3c133c0b5aa0_9,,,No individual flight has a <e1>visual contrast</e1> of more than <e2>900 millimetres</e2>.,less-equal,synthetic
+0667134c-1290-4fe0-99eb-41c0b9e63a27,CO2 emissions and primary energy associated with the thermal energy streams of a trigeneration scheme should be attributed in proportion to the output energy streams.,{'ID': '67_UK_DocM_V2_AccessAndUseOfBuildings'},CO2 emissions and <e1>primary energy</e1> associated with the <e2>thermal energy streams</e2> of a trigeneration scheme should be attributed in proportion to the output energy streams.,part-of,annotated
+5b4380ba-0066-4735-a362-316d4c8e70b2,"Where a building undergoing major renovation, which is not a residential building or a mixeduse building, will have more than 10 parking spaces after the major renovation is completed (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.",{'ID': '73_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where a building undergoing major renovation, which is not a residential building or a mixeduse building, will have more than 10 <e1>parking spaces</e1> <e2>after the major renovation is completed</e2> (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.",selection,annotated
+72e7ed0c-9e73-46b2-a919-20f3fea337fd_2,,,"An <e1>Heating systems</e1> with a potentially flammable or explosive atmosphere must not be located in a <e2>levels</e2> where there are dwellings, accommodation premises, institutions or assembly and business premises.",not-part-of,synthetic
+9dd2a0f1-0ff9-4416-8abd-1e6589980ff4_11,,,"If the <e1>configuration</e1> of a mechanical ventilation systems air duct is designed to be greater than <e2>850-1000mm</e2>, the outdoor air and exhaust air ducts shall be fitted with shutoff dampers that close automatically when the system shuts down.",greater,synthetic
+7d7d55f1-b28d-4ce8-aec6-dd4dc0786ce8_3,,,"For sizes of cylinder not listed, the <e1>principal living area</e1> from the cylinder should not exceed <e2>70 kN</e2>, where V is the volume in litres.",less-equal,synthetic
+458f98c0-ce87-48da-9c61-42a80d5dd672,Intermittent extract fans should be fitted in all wet rooms.,{'ID': '82_UK_DocF_V1_Ventilation'},<e1>Intermittent extract fans</e1> should be fitted in all <e2>wet rooms</e2>.,necessity,annotated
+5e7d4831-4ec8-48f9-9e60-0422fcc1eae4_0,,,"When replacing an existing system, the <e1>structure</e1> of the new system should be no less than <e2>number of wall ties per square metre</e2> of the existing system, except where a smaller system can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",greater-equal,synthetic
+835d8fad-7a27-4299-aa38-a5b1771a6779_11,,,"In large building complexes, such as retail parks and large sports centres, there should be <e1>65 degrees Celsius</e1> wheelchair-accessible unisex <e2>Variable volume control systems</e2> capable of including an adult changing table.",equal,synthetic
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_1,,,"The wall ties should have a horizontal spacing of 900mm and a <e1>protection</e1> of <e2>400-600mm</e2>, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",equal,synthetic
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be class E 15.",{'ID': '134_Finnish_FireSafety'},"The fire compartmenting requirement for the balcony slab of a glazed <e1>balcony</e1> of a <e2>building</e2> exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be class E 15.",part-of,annotated
+26980508-105c-49db-8595-bf001a48d757,"In rooms with no fixed seats or furnishings, the number of persons shall be calculated to be two persons per square metre.",{'ID': '103_Finnish_SafetyOfUse'},"In <e1>rooms</e1> with no fixed seats or furnishings, the <e2>number of persons</e2> shall be calculated to be two persons per square metre.",part-of,annotated
+082c7ed9-3579-48c2-a0d2-076f1edd647c_7,,,"Each of the <e1>m3/(hm2) at 50Pa</e1> <e2>heat</e2> of the centrally hinged window should be assessed as a single side, bottom or top hung window.",equal,synthetic
+3f7c10d1-d801-4351-bc85-187cf8cffeb3,The water vapour resistance and air tightness of external walls and their various layers as well as the structures attached to the external wall and joints to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,{'ID': '96_Finnish_Health-Humidity'},The water vapour resistance and air tightness of external walls and their various layers as well as the structures attached to the external wall and <e1>joints</e1> to the external <e2>wall</e2> must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,part-of,annotated
+ef4ec541-e1a7-47d4-9a83-94715d8900ba_11,,,"Where <e1>six metres</e1> or more <e2>male washrooms</e2> are within a covered car park, the requirement to install electric vehicle charge points should be met by installing charge points in parking spaces that are not within a covered car park.",greater-equal,synthetic
+21bf2954-bfa8-44ef-bb2e-4e34367965ba,"If a load-bearing element is required to have a longer fire resistance time with respect to integrity E and insulation I than with respect to load-bearing capacity R, the longer fire resistance time shall also be applied to the load-bearing capacity.",{'ID': '88_Finnish_FireSafety'},"If a <e1>load-bearing element</e1> is <e2>required to have a longer fire resistance time with respect to integrity E and insulation I than with respect to load-bearing capacity R</e2>, the longer fire resistance time shall also be applied to the load-bearing capacity.",selection,annotated
+7c44934c-61e1-4904-a493-1aa360ccc7d1,"The building shall be constructed so that the combined dead,imposed and wind loads are sustained and transmitted by it to the ground: (a) safely; and (b) without causing such deflection or deformation of any part of the building, or such movement of the ground, as will impair the stability of any part of another building.",{'ID': '1_UK_DocA_Structure'},"The building shall be constructed so that the <e1>combined dead,imposed and wind loads</e1> are sustained and transmitted by it to the ground: (a) <e2>safely</e2>; and (b) without causing such deflection or deformation of any part of the building, or such movement of the ground, as will impair the stability of any part of another building.",none,annotated
+f420ae57-5656-4558-b1a3-1079e46bf6cc,"In the case of the storey-level door of a dwelling, or if the number of people evacuating through the door exceeds 60, doors must open in the direction of the exit.",{'ID': '223_Finnish_FireSafety'},"In the case of the storey-level <e1>door</e1> of a <e2>dwelling</e2>, or if the number of people evacuating through the door exceeds 60, doors must open in the direction of the exit.",part-of,annotated
+e2f06254-ca46-4471-89c7-ebef89a4d93d,"Where used, passive stack ventilation terminals should be located in the ceiling.",{'ID': '50_UK_DocF_V2_Ventilation'},"Where used, <e1>passive stack ventilation</e1> <e2>terminals</e2> should be located in the ceiling.",selection,annotated
+7d1ada0b-8dcc-4c01-84d7-78b80cb404c9,"If there are not enough associated parking spaces outside of the covered car park to meet the requirement to install electric vehicle charge points, then cable routes should be installed for associated parking spaces within the covered car park.",{'ID': '58_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If there are not enough associated parking spaces outside of the covered car park to meet the requirement to install electric vehicle charge points, then cable routes should be installed for <e1>associated</e1> <e2>parking spaces</e2> within the covered car park.",selection,annotated
+596cc55c-f50f-4155-962f-832b87226a8e,"For mechanical ventilation systems, fan units should be appropriately sized so that fans operating in normal background ventilation mode are not overly noisy.",{'ID': '23_UK_DocF_V1_Ventilation'},"For mechanical ventilation systems, fan units should be appropriately sized so that <e1>fans</e1> operating in normal background ventilation mode are <e2>not overly noisy</e2>.",necessity,annotated
+db734798-9e42-4fe1-900c-77d4e6131809,"The main doors for entering a dwelling (usually the front door) should have a door viewer unless other means exist to see callers, such as clear glass within the door or a window next to the doorset.",{'ID': '11_UK_DocQ_Security_Dwellings'},"The <e1>main doors</e1> for entering a dwelling (usually the front door) should have a <e2>door viewer</e2> unless other means exist to see callers, such as clear glass within the door or a window next to the doorset.",necessity,annotated
+d3fc8c9b-c23a-4188-8723-369caa90453c,"The reference value for a building's total combined window area is 15 of the sum total of the floor  plate areas  of  the  buildings  storeys that  are  fully  or in  part  above  the  ground  but, however, at most 50 of the building's facade area.",{'ID': '124_Finnish_EnergyEfficiency'},"The reference value for a building's total combined window area is 15 of the sum total of the <e1>floor plate areas</e1> of the buildings <e2>storeys</e2> that are fully or in part above the ground but, however, at most 50 of the building's facade area.",part-of,annotated
+09b2a395-5293-4b7d-82d4-5312482d59e9_1,,,"Door entry controls, where provided, are mounted <e1>01:20:00</e1> <e2>fire compartmenting requirement</e2> finished ground level, and at least 300mm away from any projecting corner.",equal,synthetic
+88e23b46-22d9-4be6-87b7-40541f7995a9_6,,,"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the <e1>above</e1> exceeds <e2>25</e2>; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",greater,synthetic
+42f29765-356f-4d9c-9a73-bc99e7044e07,"People with mobility impairments who arrive as passengers should be able to alight from a vehicle close to the principal entrance, or alternative accessible entrance, of the building in a way that is convenient for entry into the building.",{'ID': '47_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>People</e1> with mobility impairments who <e2>arrive as passengers</e2> should be able to alight from a vehicle close to the principal entrance, or alternative accessible entrance, of the building in a way that is convenient for entry into the building.",selection,annotated
+2cb4937d-9ec4-4013-8e9b-318a8adae27a,Account should be taken of outside noise when considering whether openable windows are appropriate for purge ventilation.,{'ID': '24_UK_DocF_V1_Ventilation'},Account should be taken of outside noise when considering whether <e1>openable</e1> <e2>windows</e2> are appropriate for purge ventilation.,selection,annotated
+a33a8e64-62e5-4a95-b5fb-356b18c8f34f,The crawl space must be accessible for inspections and maintenance of the equipment and systems located there.,{'ID': '84_Finnish_Health-Humidity'},The <e1>crawl space</e1> must be <e2>accessible for inspections and maintenance of the equipment and systems located there</e2>.,necessity,annotated
+5f7b8ff7-50d0-46a2-a48b-fa19786c98fd,"If  the  domestic  hot  water cylinder  is  located  inside  the  building  envelope,  50  of  the  calculated  domestic  hot  water cylinder heat loss shall be added to the thermal load of the spaces of the building.",{'ID': '105_Finnish_EnergyEfficiency'},"If the domestic hot water cylinder is <e1>located inside the building envelope</e1>, <e2>50</e2> of the calculated domestic hot water cylinder heat loss shall be added to the thermal load of the spaces of the building.",none,annotated
+72e7ed0c-9e73-46b2-a919-20f3fea337fd,"An area with a potentially flammable or explosive atmosphere must not be located in a building where there are dwellings, accommodation premises, institutions or assembly and business premises.",{'ID': '56_Finnish_FireSafety'},"An <e1>area</e1> with a potentially flammable or explosive atmosphere must not be located in a <e2>building</e2> where there are dwellings, accommodation premises, institutions or assembly and business premises.",not-part-of,annotated
+cf35d4a4-3170-421b-9be1-b68d928eed1d_0,,,"A roof with a <e1>speed</e1> greater than <e2>1000m2</e2> must be constructed making appropriate use of walkways, roof ladders, safety ladders, roof stairs, roof treads and foot rails.",greater,synthetic
+43e26628-8b62-4cc6-91e2-284335df1564_4,,,"In rooms used for sleeping or rest, the <e1>distance of the uppermost floor level from the entry level</e1> may not exceed <e2>2.0 m3/(h m2)</e2>.",less-equal,synthetic
+dcc583b1-8c4c-42cf-a1ed-e8907de56254_11,,,"The <e1>size</e1> of the indoor steps of other spaces intended for everyday use may be no more than <e2>18 dm3/s</e2>, and the tread must be no less than 270 millimetres.",less-equal,synthetic
+4094b859-b3b4-4035-94cd-8cf47ccbd801_8,,,"The <e1>atmosphere</e1> is at least <e2>1,000 millimetres</e2>.",greater-equal,synthetic
+d988e207-c3f9-4314-9a16-f99b334595f4_1,,,The <e1>total number of ventilators</e1> must be no less than <e2>2.5 ties/m2</e2>.,greater-equal,synthetic
+94c0e823-a61d-49d6-82b3-4ca96f65dfa4,The buildings surfaces and lighting must be such that they achieve the contrasts in brightness needed for observation.,{'ID': '64_Finnish_SafetyOfUse'},The <e1>buildings </e1>surfaces and <e2>lighting</e2> must be such that they achieve the contrasts in brightness needed for observation.,part-of,annotated
+835d8fad-7a27-4299-aa38-a5b1771a6779_1,,,"In large building complexes, such as retail parks and large sports centres, there should be <e1>5m</e1> wheelchair-accessible unisex <e2>high rate controls</e2> capable of including an adult changing table.",equal,synthetic
+0da52584-1b37-48b5-840f-3795ae695275,the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,{'ID': '119_UK_DocM_V2_AccessAndUseOfBuildings'},the minimum clear dimensions of the platform are: 1100mm wide and 1400mm <e1>deep</e1> where two doors are located at 90° relative to each other and where the <e2>lifting platform</e2> is enclosed or where provision is being made for an accompanied wheelchair user.,none,annotated
+9415ae4b-7a74-4c70-a245-e4381c6d71bf,"At gables and party walls, insulation should extend to the wall; if the space between the wall and joist is less than 100mm, perimeter insulation may be required.",{'ID': '170_UK_DocL_V1_ConsrvationOfFuelAndPower'},"At gables and <e1>party walls</e1>, <e2>insulation</e2> should extend to the wall; if the space between the wall and joist is less than 100mm, perimeter insulation may be required.",part-of,annotated
+d3fc8c9b-c23a-4188-8723-369caa90453c_2,,,"The <e1>prevailing wind direction</e1> for a building's total combined window area is <e2>65mm</e2> of the sum total of the floor plate areas of the buildings storeys that are fully or in part above the ground but, however, at most 50 of the building's facade area.",equal,synthetic
+9ff8b8fd-5361-4c3d-9a7e-7459276c8df7_1,,,The <e1>span</e1> must not exceed the individual dwellings <e2>configuration</e2>.,less-equal,synthetic
+2a256a9c-0b8a-4acf-87e1-86a5857f36a3,"Where a driveway forms all, or part of, the approach route, an additional allowance of at least 900mm wide should be provided so that a wheelchair user can pass a parked car.",{'ID': '17_UK_DocM_V1_AccessAndUseOfBuildings'},"Where a driveway forms all, or part of, the approach route, an <e1>additional allowance</e1> of at least 900mm wide should be provided so that a <e2>wheelchair user can pass a parked car</e2>.",selection,annotated
+8102cb27-2e2a-4008-99d6-a53f5045f6e2,Structures with surfaces exposed to moisture must be resistant to the effects of water.,{'ID': '36_Finnish_Health-Humidity'},<e1>Structures</e1> with surfaces exposed to moisture must be <e2>resistant to the effects of water</e2>.,necessity,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",{'ID': '84_Finnish_Health-IndoorClimateAndVentilation'},"If the air flows of extract air categories 1 and <e1>2</e1> are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined <e2>air flow</e2> is classified under category 2.",none,annotated
+9dd2a0f1-0ff9-4416-8abd-1e6589980ff4_0,,,"If the <e1>part</e1> of a mechanical ventilation systems air duct is designed to be greater than <e2>one metre</e2>, the outdoor air and exhaust air ducts shall be fitted with shutoff dampers that close automatically when the system shuts down.",greater,synthetic
+f7935bb4-9e5f-4e91-bbf1-54e45c1ef24c_1,,,A building with a <e1>intermediate landing</e1> exceeding <e2>200 Watts per room</e2> must be equipped with anchoring structures for safety lines.,greater,synthetic
+5e7d4831-4ec8-48f9-9e60-0422fcc1eae4_4,,,"When replacing an existing system, the <e1>Unit length</e1> of the new system should be no less than <e2>primary energy factor</e2> of the existing system, except where a smaller system can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",greater-equal,synthetic
+57f7bbad-51b7-4627-8fe9-2d7a50289448,"Doors to the principal, or alternative accessible, entrance should be accessible to all, particularly wheelchair users and people with limited physical dexterity.",{'ID': '64_UK_DocM_V2_AccessAndUseOfBuildings'},"Doors to the <e1>principal</e1>, or <e2>alternative accessible</e2>, entrance should be accessible to all, particularly wheelchair users and people with limited physical dexterity.",none,annotated
+8bb9aee2-a950-4a65-a715-287035906789,"Spaces of a non-residential building and common spaces of a residential building as well as the fixtures, fittings and fixed equipment in them shall be suitable for persons with mobility and functional impairment.",{'ID': '27_Finnish_Accessibility'},"Spaces of a non-residential building and <e1>common spaces</e1> of a <e2>residential building</e2> as well as the fixtures, fittings and fixed equipment in them shall be suitable for persons with mobility and functional impairment.",part-of,annotated
+0aaf71f0-a482-4a72-a407-0d6db79c7f6f_5,,,"In a building consisting primarily of one storey, no more than 200 m2 of fire-compartmented and no more than <e1>55</e1> of non-fire-compartmented <e2>fire compartment</e2> that essentially relate to the business of the building may be located on the level of second storey.",less-equal,synthetic
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_11,,,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and <e1>10m</e1> in <e2>cross-sectional area</e2>; however, the sum of these must be at least 1,500 millimetres.",greater-equal,synthetic
+cccbc1ea-27be-4d7b-b53c-3cb467a51020,"For heating and cooling systems in a new non-domestic building, or when a heat generator such as a boiler is replaced in an existing non-domestic building, each room should be provided with thermostatic room controls.",{'ID': '220_UK_DocM_V2_AccessAndUseOfBuildings'},"For heating and cooling systems in a new non-domestic building, or when a <e1>heat generator</e1> such as a boiler is <e2>replaced</e2> in an existing non-domestic building, each room should be provided with thermostatic room controls.",selection,annotated
+1320873f-de9b-4c55-a7c0-67f545c4a46e,"All access routes to principal, or alternative accessible, entrances should be surfaced so that people are able to travel along them easily, without excessive effort and without the risk of tripping or falling.",{'ID': '42_UK_DocM_V2_AccessAndUseOfBuildings'},"All <e1>access routes</e1> to principal, or alternative accessible, entrances should be surfaced so that <e2>people are able to travel along them easily, without excessive effort and without the risk of tripping or falling</e2>.",none,annotated
+99a53f17-48cb-4012-a47b-700761e0983b,Where a new building which is not a residential building or a mixed-use building has more than 10 parking spaces (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,{'ID': '61_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},Where a new <e1>building</e1> which is not a residential building or a mixed-use building has more than 10 <e2>parking spaces</e2> (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,part-of,annotated
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77,Skirtings totalling up to 50mm total thickness and shallow projecting ducts or casings above 1800mm may be discounted when measuring clear width.,{'ID': '131_UK_DocM_V1_AccessAndUseOfBuildings'},Skirtings totalling up to <e1>50mm</e1> <e2>total thickness</e2> and shallow projecting ducts or casings above 1800mm may be discounted when measuring clear width.,less-equal,annotated
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be class E 15.",{'ID': '134_Finnish_FireSafety'},"The fire compartmenting requirement for the balcony slab of a glazed <e1>balcony</e1> of a building exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be <e2>class</e2> E 15.",none,annotated
+72e7ed0c-9e73-46b2-a919-20f3fea337fd,"An area with a potentially flammable or explosive atmosphere must not be located in a building where there are dwellings, accommodation premises, institutions or assembly and business premises.",{'ID': '56_Finnish_FireSafety'},"An area with a potentially flammable or explosive atmosphere must not be located in a building where there are dwellings, accommodation premises, institutions or <e1>assembly</e1> and business <e2>premises</e2>.",selection,annotated
+2633c957-07b4-4caa-a9d6-5acbac16b0b0_4,,,NOTE: Linear interpolation should be used to determine efficiencies between manufacturers declared efficiencies at 30 and <e1>2.0 m3/(h m2)</e1> <e2>building emission rate</e2>.,equal,synthetic
+922bf8df-3a70-4f45-8c04-200b638d3b3c_3,,,The cold water pipe shall be designed and installed so that the <e1>projection</e1> in the cold water system may not exceed <e2>270 millimetres</e2>.,less-equal,synthetic
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_11,,,"In buildings more than <e1>35 mg/m3 (30 ppm)</e1> and at most 28 metres in <e2>tread</e2>, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",greater,synthetic
+eccd4f77-ef4a-41fd-a22a-620c84fdddd4_2,,,There is a minimum of <e1>160 millimetres</e1> of worktop to at least <e2>exit</e2> of the oven and fridge or fridge freezer where this is taller than the worktop height (or to one side of a pair of tall appliances where they are located together at the end of a run).,greater-equal,synthetic
+fc129e2c-abfa-48be-9fd6-e85f077ae67b,"A space alongside the leading edge of a door should be provided to enable a wheelchair user to reach and grip the door handle, then open the door without releasing hold on the handle and without the footrest colliding with the return wall.",{'ID': '70_UK_DocM_V2_AccessAndUseOfBuildings'},"A <e1>space</e1> alongside the leading edge of a <e2>door</e2> should be provided to enable a wheelchair user to reach and grip the door handle, then open the door without releasing hold on the handle and without the footrest colliding with the return wall.",none,annotated
+a090f6bb-f89b-44c1-b6ee-8e72e2be30a0,Where a system for on-site electricity generation is installed (a) reasonable provision must be made to ensure that (i) the system and its electrical output are appropriately sized for the site and available infrastructure; (ii) the system has effective controls; and (b) it must be commissioned by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.,{'ID': '370_UK_DocM_V2_AccessAndUseOfBuildings'},Where a <e1>system</e1> for <e2>on-site electricity generation is installed</e2> (a) reasonable provision must be made to ensure that (i) the system and its electrical output are appropriately sized for the site and available infrastructure; (ii) the system has effective controls; and (b) it must be commissioned by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.,selection,annotated
+8151be81-09ad-4dac-b2d2-f0d757915b6c_4,,,"However, when the snow load can occur, the <e1>load EER</e1> of the load s should be at least <e2>190  millimetres</e2>.",greater-equal,synthetic
+1ebce0c9-705c-47ee-8429-e83cfbed72db,"All walls, ducts and boxings to every WC/cloakroom, bath and shower room are strong enough to support grab rails, seats and other adaptations that could impose a load of 1.5kN/m2.",{'ID': '103_UK_DocM_V1_AccessAndUseOfBuildings'},"All walls, ducts and <e1>boxings</e1> to every WC/cloakroom, bath and <e2>shower room</e2> are strong enough to support grab rails, seats and other adaptations that could impose a load of 1.5kN/m2.",part-of,annotated
+da4d5959-6e64-4e04-a1f3-8b42b6addab0_4,,,The outdoor <e1>inner surfaces</e1> used in the calculations for buildings other than those in intended use categories 1 and 2 outside the occupancy period shall be at least <e2>1 in 40</e2>.,greater-equal,synthetic
+3ca5cb38-b90b-4449-ba14-4268866df8e1_7,,,The water heater is close to the draw-off points and has a <e1>dwelling emission rate</e1> no greater than <e2>300 millimetres</e2>.,less-equal,synthetic
+e40e66a5-25da-494b-b09c-e3241289a1b7,All other bedrooms should be accessible to a wheelchair user.,{'ID': '101_UK_DocM_V1_AccessAndUseOfBuildings'},All other <e1>bedrooms</e1> should be <e2>accessible to a wheelchair user</e2>.,necessity,annotated
+4b510cad-fefb-44be-a9cb-a26e0c42994c,"If the building is connected to a heating system where heat is conveyed via heat pipes external to the building from a shared heat exchanger or heat generation unit to several buildings, the heat loss from those pipes shall be divided between the buildings in proportion to their areas.",{'ID': '101_Finnish_EnergyEfficiency'},"If the building is connected to a heating system where heat is conveyed via heat pipes external to the building from a shared heat exchanger or heat generation unit to several buildings, the <e1>heat loss</e1> from those pipes shall be <e2>divided between the buildings in proportion to their areas</e2>.",necessity,annotated
+259c1614-77ef-4ae4-a401-83caa603e374,"The main doors for entering a dwelling (usually the front doorset) should be fitted with a multipoint locking system that meets the requirements of: PAS 3621 (key locking on both sides), or PAS 8621 (non-key locking on the internal face), or PAS 10621 (non-key locking on the internal face, but with an external locking override facility).",{'ID': '35_UK_DocQ_Security_Dwellings'},"The main doors for entering a dwelling (usually the front doorset) should be fitted with a <e1>multipoint locking system</e1> that meets the requirements of: <e2>PAS 3621 (key locking on both sides)</e2>, or PAS 8621 (non-key locking on the internal face), or PAS 10621 (non-key locking on the internal face, but with an external locking override facility).",selection,annotated
+"8feaf7f2-dfd8-43ae-ab8d-791ee1ffd86c	However, if the elevation difference is no more than 1,000 millimetres, the ramp may not have a gradient of more than eight per cent.	{'ID': '9_Finnish_Accessibility'}_4",,,"However, if the <e1>allowance</e1> is no more than <e2>one per 100m2</e2>, the ramp may not have a gradient of more than eight per cent.",less-equal,synthetic
+23db27ac-b594-4b26-883d-922d713d382a,"When installing or renovating thermal elements, the element being installed should be draught-proofed and airleakage gaps should be filled.",{'ID': '161_UK_DocM_V2_AccessAndUseOfBuildings'},"When installing or renovating thermal elements, the <e1>element</e1> <e2>being installed</e2> should be draught-proofed and airleakage gaps should be filled.",selection,annotated
+56517433-cf40-4b88-a9d4-18e61e0e9993_11,,,"In addition, on both sides of the toilet seat there shall be a <e1>leak detectors</e1> of at least <e2>75 light source lumens per circuit-watt</e2>.",greater-equal,synthetic
+3c28dbd6-8a3d-4ede-ae08-89e4b5d69d60,The approach route is a minimum of 900mm wide with a maximum cross fall of 1 in 40.,{'ID': '16_UK_DocM_V1_AccessAndUseOfBuildings'},The <e1>approach route</e1> is a minimum of 900mm <e2>wide</e2> with a maximum cross fall of 1 in 40.,part-of,annotated
+13a437c0-918c-47f2-85bd-b80dd69eb027,"There are no limits on the design of display windows and similar glazing, but for new buildings their impact must be taken into account in the calculation of primary energy and CO2 emissions.",{'ID': '138_UK_DocM_V2_AccessAndUseOfBuildings'},"There are no <e1>limits</e1> on the <e2>design</e2> of display windows and similar glazing, but for new buildings their impact must be taken into account in the calculation of primary energy and CO2 emissions.",not-part-of,annotated
+9ebe07e9-8381-451a-9ab8-701912478b30,The air flow rate of all mechanical ventilation fans should be tested.,{'ID': '210_UK_DocF_V1_Ventilation'},The air flow rate of all <e1>mechanical</e1> ventilation fans should be <e2>tested</e2>.,none,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",{'ID': '85_Finnish_Health-IndoorClimateAndVentilation'},"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the <e1>total extract air flow</e1> from these spaces does not exceed 10 of the total air flow in the vertical <e2>duct</e2>.",none,annotated
+208b093d-361f-4aec-819d-4abca4e72c68,"in an evacuation area where the maximum number of occupants is 60, the second exit may be no less than 900 millimetres in width.",{'ID': '216_Finnish_FireSafety'},"in an evacuation area where the maximum number of occupants is 60, the <e1>second</e1> <e2>exit</e2> may be no less than 900 millimetres in width.",selection,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479_2,,,Individual flights are: for gradients up to 1:15 not more than <e1>EI 15</e1> <e2>inaccuracies</e2>; for gradients up to 1:12 not more than 5m long.,less-equal,synthetic
+cc39ab97-8937-45f7-bc1f-bb2ccb95cb56,Drains shall convey foundation drainage water via drainage wells to a collection well.,{'ID': '172_Finnish_Health-WaterAndSewerage'},<e1>Drains</e1> shall <e2>convey foundation drainage water via drainage wells to a collection well</e2>.,necessity,annotated
+e21fa967-934e-4a29-a66d-252fdbbf928f_11,,,"If the parasitic energy use is unknown, an <e1>both sides</e1> of <e2>four</e2> should be made for any control system.",equal,synthetic
+f5a71c7b-e852-40f2-8f88-91cda7902a7e_3,,,"If a new building has a space heating or airconditioning system with an <e1>spread of fire</e1> greater than <e2>30% load</e2>, a building automation and control system should be installed.",greater,synthetic
+e43c1e88-be80-42d9-944e-1bf0f0f82479_6,,,Individual flights are: for gradients up to 1:15 not more than <e1>0.06 m2</e1> <e2>efficiencies</e2>; for gradients up to 1:12 not more than 5m long.,less-equal,synthetic
+09b2a395-5293-4b7d-82d4-5312482d59e9_0,,,"Door entry controls, where provided, are mounted <e1>between 550mm and 700mm</e1> <e2>inner surfaces</e2> finished ground level, and at least 300mm away from any projecting corner.",equal,synthetic
+f2bf62e6-9577-48b5-b15d-9fe4904acf52,"Where controls are integrated in the heater, the system should be provided with a time switch/programmer and room temperature sensor linked to heater firing and fan speed control.",{'ID': '268_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where controls are integrated in the heater, the <e1>system</e1> should be provided with a time switch/programmer and <e2>room temperature sensor</e2> linked to heater firing and fan speed control.",necessity,annotated
+9fd15b82-fc32-4364-8724-f1ef14f0c047_10,,,The cooker hood should <e1>specification</e1> at least the <e2>height</e2> of the cooker.,greater-equal,synthetic
+dcc583b1-8c4c-42cf-a1ed-e8907de56254_2,,,"The rise of the indoor steps of other spaces intended for everyday use may be no more than 180 millimetres, and the <e1>impact</e1> must be no less than <e2>B</e2>.",greater-equal,synthetic
+aa41a5d4-c0b1-4da7-84a0-5c2e2738654f,The total number of ventilators installed in the dwellings habitable rooms and kitchens should be at least the following: Five ventilators if the dwelling has more than one bedroom.,{'ID': '89_UK_DocF_V1_Ventilation'},The total number of ventilators installed in the dwellings <e1>habitable rooms</e1> and kitchens should be at least the following: Five ventilators if the <e2>dwelling</e2> has more than one bedroom.,none,annotated
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_2,,,Skirtings totalling up to 50mm total thickness and shallow projecting <e1>cooker</e1> or casings above <e2>30</e2> may be discounted when measuring clear width.,greater,synthetic
+8b054fa5-fa6b-40f8-996a-a6dfea855fc3_5,,,"The <e1>CO2</e1> between a door that opens onto a landing and the upper edge of the ramp or flight of stairs must be no less than <e2>18 dm3/s</e2> on the side wall and no less than 1,500 millimetres on the end wall.",greater-equal,synthetic
+4470dde4-6422-4c13-9781-de68c3e075dc_3,,,"The outdoor <e1>thick</e1> of a dwelling unit, however, shall be designed to be a minimum of <e2>2.0 m3/(h m2)</e2>.",greater-equal,synthetic
+385a4365-40c0-4c07-8854-b07bde292fd2,"The  electrical  energy  consumption  of  a  mechanical ventilation  system  shall  be  calculated  on  the  basis  of  air  flows,  specific  fan  powers  and operating times for all air handling units and powered roof ventilators in the building.",{'ID': '109_Finnish_EnergyEfficiency'},"The electrical <e1>energy consumption</e1> of a <e2>mechanical</e2> ventilation system shall be calculated on the basis of air flows, specific fan powers and operating times for all air handling units and powered roof ventilators in the building.",none,annotated
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9,"In buildings more than 9 metres and at most 28 metres in height, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",{'ID': '126_Finnish_SafetyOfUse'},"In buildings more than 9 metres and at most 28 metres in height, the <e1>attic</e1> and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be <e2>accessible via the interior</e2>.",necessity,annotated
+108b5709-f035-4697-ba25-56edd2ce60fc,"Where permanent or removable seating is provided as part of the design, allowance should be made for disabled people to have a choice of seating location at spectator events.",{'ID': '126_UK_DocM_V2_AccessAndUseOfBuildings'},"Where permanent or removable seating is provided as part of the design, allowance should be made for <e1>disabled people</e1> to <e2>have a choice of seating location at spectator events</e2>.",necessity,annotated
+9618a274-45da-4e3e-87f0-21c2bfae4a8e,"A guardrail must be used at points with a level difference of over 0.7 metres, if these can be accessed by children.",{'ID': '39_Finnish_SafetyOfUse'},"A <e1>guardrail</e1> must be used at points with a level difference of over 0.7 metres, if these can be <e2>accessed by children</e2>.",selection,annotated
+3724fd47-22f7-432c-81a2-1abcb95c7df2_11,,,"The <e1>condition</e1> installed in a dwellings habitable rooms and kitchens should be no fewer than <e2>90</e2>, except in one bedroom properties, where there should be no fewer than four.",greater-equal,synthetic
+4f2b56cb-9852-4406-bbea-31f426fb4910,"replacing a heating system including the heating appliance, pipework and heat emitters), the energy performance of the whole system should be assessed, and the results documented and handed over to the building owner with the manufacturers supporting literature.",{'ID': '397_UK_DocM_V2_AccessAndUseOfBuildings'},"replacing a heating system including the heating appliance, pipework and heat emitters), the <e1>energy performance</e1> of the whole <e2>system</e2> should be assessed, and the results documented and handed over to the building owner with the manufacturers supporting literature.",part-of,annotated
+76bf63bd-30f4-440d-81a0-61ca16170f70_10,,,Control should be maximised and heat gain to uninsulated pipes should only be permitted where the <e1>headroom</e1> is less than <e2>200 Watts per room</e2> of the total load.,less,synthetic
+d925c189-860a-4fcb-ae88-d1cf8cc14fb8,"The tread of steps in covered or heated outdoor staircases must be no less than 300 millimetres, and the riser may be no more than 160 millimetres.",{'ID': '28_Finnish_SafetyOfUse'},"The <e1>tread</e1> of steps in covered or heated outdoor staircases must be no less than <e2>300 millimetres</e2>, and the riser may be no more than 160 millimetres.",greater-equal,annotated
+511c1a7f-08b9-48ec-aea6-9b749fdf31a1,"A non-residential building shall, considering the intended use and functional units of the building and distances in the building, have an adequate number of appropriately located toilet facilities which are suitable for users of wheelchairs and walking frames with wheels.",{'ID': '51_Finnish_Accessibility'},"A non-residential building shall, considering the intended use and functional units of the building and distances in the building, have an <e1>adequate number</e1> of appropriately located <e2>toilet facilities</e2> which are suitable for users of wheelchairs and walking frames with wheels.",equal,annotated
+72e7ed0c-9e73-46b2-a919-20f3fea337fd,"An area with a potentially flammable or explosive atmosphere must not be located in a building where there are dwellings, accommodation premises, institutions or assembly and business premises.",{'ID': '56_Finnish_FireSafety'},"An area with a potentially flammable or explosive atmosphere must not be located in a building where there are dwellings, accommodation premises, institutions or assembly and <e1>business</e1> <e2>premises</e2>.",selection,annotated
+984c252b-74f4-4d85-9080-1c8ae1851eca,"If performance requires thicker glass to be used, an equivalent window unit with standard thickness (6mm) glazing should be shown to meet the required standard.",{'ID': '113_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If performance requires thicker glass to be used, an <e1>equivalent</e1> <e2>window unit</e2> with standard thickness (6mm) glazing should be shown to meet the required standard.",selection,annotated
+636bce88-fd3b-4e5a-9f6a-4aa0d3d1bfa4_11,,,"Where a new building contains more than <e1>two years</e1> <e2>tier</e2>, a common access point for a gigabit-capable public electronic communications network is required as a part of the buildings gigabit-ready physical infrastructure.",greater,synthetic
+825053cb-af5d-43a9-b59b-e2a5ae78ea73,The total number of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the number of dwellings in the residential building; b. the number of associated parking spaces.,{'ID': '59_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},The total number of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the number of dwellings in the residential building; b. the <e1>number</e1> of associated <e2>parking spaces</e2>.,part-of,annotated
+f51da5c6-7614-4719-8150-e22851e4aa12,"The building fabric should be constructed so that thermal bridging, including at the party wall, is reasonably limited.",{'ID': '152_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The <e1>building fabric</e1> should be <e2>constructed</e2> so that thermal bridging, including at the party wall, is reasonably limited.",necessity,annotated
+9494f4b9-aae0-4668-aebb-1d8851dd0824,"In refreshment facilities, bars and counters (or sections of them) should be at a level suitable for wheelchair users.",{'ID': '127_UK_DocM_V2_AccessAndUseOfBuildings'},"In refreshment facilities, <e1>bars and counters</e1> (or <e2>sections</e2> of them) should be at a level suitable for wheelchair users.",part-of,annotated
+64aead92-11dc-49ab-9086-c86f6d1f9c3e,A dynamic calculation tool shall be used for the calculation of the room temperature for the summer season.,{'ID': '162_Finnish_EnergyEfficiency'},A dynamic <e1>calculation tool</e1> shall be used for the <e2>calculation of the room temperature for the summer season</e2>.,necessity,annotated
+7f696221-52c9-4c52-8f90-74bd93c51299_4,,,"This grippable handrail is 850-1000mm above the pitch line of the flight and <e1>effective rated output</e1> at least <e2>1,200 millimetres</e2> beyond the top and bottom nosings.",greater-equal,synthetic
+35cacecf-06dc-4b0f-aadb-db2ee05518c7_4,,,The area of windows and roof windows (but excluding display windows) <e1>not reasonable to achieve a step-free approach route to the principal private entrance</e1> exceeds <e2>three metres</e2> of the facade area.,greater,synthetic
+46f5be2a-1514-420b-bc39-331fc6e0d2df_2,,,"The dwelling primary energy rate, <e1>natural light</e1> and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the target primary energy rate, <e2>air-tightness</e2> and target fabric energy efficiency rate, respectively.",less-equal,synthetic
+f27c9fb4-dc28-494c-a277-a51360cdfdb8,A handrail and its ending must be shaped safely and must continue past the start and end points of the structure.,{'ID': '57_Finnish_SafetyOfUse'},A <e1>handrail</e1> and its ending must be <e2>shaped safely</e2> and must continue past the start and end points of the structure.,necessity,annotated
+703e5c71-bd54-4267-acf4-fa7db1e70d49,"Any sound system in an auditorium, a restaurant, a conference facility, a facility for festive occasions, a teaching facility or other similar assembly facility or a public service facility shall have an induction loop or a similar sound transmission system.",{'ID': '67_Finnish_Accessibility'},"Any <e1>sound system</e1> in an auditorium, a restaurant, a <e2>conference facility</e2>, a facility for festive occasions, a teaching facility or other similar assembly facility or a public service facility shall have an induction loop or a similar sound transmission system.",part-of,annotated
+e15250c0-1279-4d29-a1ec-31560b045007_8,,,<e1>muntins</e1> of basement storeys must not be connected to fire and smoke-proof <e2>property</e2>.,not-part-of,synthetic
+0da52584-1b37-48b5-840f-3795ae695275_4,,,the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where <e1>0.7W/(m2K)</e1> <e2>Manual controls</e2> are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+5ca184fa-e100-4f97-957d-e37ae944786f,The cost of installing electric vehicle charge points and cable routes is not more than 7% of the total capital cost of the major renovation.,{'ID': '51_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},The <e1>cost</e1> of installing electric vehicle charge points and cable routes is not more than <e2>7%</e2> of the total capital cost of the major renovation.,less-equal,annotated
+d8066a73-49c2-4e99-825a-b49b9b2ba67d_11,,,A landing measuring at least <e1>65mm</e1> in <e2>facade area</e2> must be reserved in front of and behind a door located in an exit route.,greater-equal,synthetic
+7d877df3-9aa7-4dff-a64d-5356a66c944d,"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a width exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",{'ID': '59_Finnish_SafetyOfUse'},"In <e1>public</e1> <e2>outdoor and indoor spaces</e2>, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a width exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",selection,annotated
+d342429e-d3fc-46e0-a195-527cfef1fd4b,"When an existing building with a total useful floor area of over 1000m2 is being extended or the habitable area is being increased, consequential improvements should be installed.",{'ID': '451_UK_DocM_V2_AccessAndUseOfBuildings'},"When an existing building with a total useful floor area of over 1000m2 is <e1>being extended</e1> or the habitable area is <e2>being increased</e2>, consequential improvements should be installed.",none,annotated
+8e8f4fb5-00b5-404f-89df-a07287984748_2,,,"In buildings with a <e1>storage capacity</e1> greater than <e2>23C</e2>, automatic meter reading and data collection facilities should be installed.",greater,synthetic
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab_7,,,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the <e1>service</e1> of that installation exceeds <e2>65mm</e2> of the total cost of the major renovation.",greater,synthetic
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_9,,,Skirtings totalling up to 50mm total thickness and shallow projecting ducts or <e1>control appliance</e1> above <e2>9 metres</e2> may be discounted when measuring clear width.,greater,synthetic
+a5e9c36f-358f-4375-943c-6d5b89c82647,"Any abrupt level differences of over 0.7 metres and any precipices located in the vicinity of common play and recreation areas associated with buildings with more than two dwellings must be indicated by appropriate barriers or suitable planted areas, or outfitted with a base that cushions any fall.",{'ID': '92_Finnish_SafetyOfUse'},"Any abrupt level differences of over 0.7 metres and any precipices located in the vicinity of <e1>common play</e1> and recreation areas associated with buildings with more than two <e2>dwellings</e2> must be indicated by appropriate barriers or suitable planted areas, or outfitted with a base that cushions any fall.",none,annotated
+835d8fad-7a27-4299-aa38-a5b1771a6779_9,,,"In large building complexes, such as retail parks and large sports centres, there should be <e1>1 in 40</e1> wheelchair-accessible unisex <e2>hermostatic control</e2> capable of including an adult changing table.",equal,synthetic
+5577528f-8fa0-4ca3-96f6-ea418091cb86,The side edges of stairs and landings must be fitted with a raised camber to prevent slipping over the edge if a cube measuring more than 50 millimetres in width is able to pass through the opening between the plane level and the handrail or wall.,{'ID': '32_Finnish_SafetyOfUse'},The <e1>side edges</e1> of <e2>stairs</e2> and landings must be fitted with a raised camber to prevent slipping over the edge if a cube measuring more than 50 millimetres in width is able to pass through the opening between the plane level and the handrail or wall.,part-of,annotated
+12e545d1-64f4-45c9-a520-5b8a003eba0a_2,,,"If the dwelling has more than <e1>850 millimetres</e1> exposed <e2>oven</e2>, the area of background ventilators on each facade should be similar, to allow cross-ventilation.",greater,synthetic
+528e7551-acfd-4fa6-be24-9c91bd6d7679,The materials and fittings shall be compatible.,{'ID': '149_Finnish_Health-WaterAndSewerage'},The materials and <e1>fittings</e1> shall be <e2>compatible</e2>.,necessity,annotated
+b5aa20f2-571e-48d8-9943-4102c9f9bd1a,"In exit passageways and fire-compartmented elevator shafts, means must be arranged for both smoke extraction and flow of replacement air.",{'ID': '250_Finnish_FireSafety'},"In exit passageways and fire-compartmented elevator shafts, <e1>means</e1> must be arranged for both smoke extraction and <e2>flow of replacement air</e2>.",selection,annotated
+a8b3e54e-902c-4502-99a2-8c41d46f1416_11,,,"If there are more than <e1>9 metres</e1> <e2>battery storage</e2> in a space, they must be linked to one another in at least four groups, unless the chairs are placed around tables.",greater,synthetic
+a5e9c36f-358f-4375-943c-6d5b89c82647,"Any abrupt level differences of over 0.7 metres and any precipices located in the vicinity of common play and recreation areas associated with buildings with more than two dwellings must be indicated by appropriate barriers or suitable planted areas, or outfitted with a base that cushions any fall.",{'ID': '92_Finnish_SafetyOfUse'},"Any abrupt <e1>level differences</e1> of over 0.7 metres and any precipices located in the vicinity of common play and <e2>recreation</e2> areas associated with buildings with more than two dwellings must be indicated by appropriate barriers or suitable planted areas, or outfitted with a base that cushions any fall.",none,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_6,,,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the <e1>number of people evacuating</e1> of these must be at least <e2>0.15 dm3/s per m2</e2>.",greater-equal,synthetic
+36650de0-ef3c-4fd1-8199-f47c0e576076_3,,,the <e1>drop</e1> of the platform does not exceed <e2>0.8 metres</e2>.,less-equal,synthetic
+5211dbd1-d12a-4371-ad62-1dc5616cd2f5,The heat pump along with its accompanying pipework should be flushed and purged as a separate system while isolated from the ground array system.,{'ID': '387_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>heat pump</e1> along with its accompanying <e2>pipework</e2> should be flushed and purged as a separate system while isolated from the ground array system.,part-of,annotated
+35af73f1-53c7-4377-9da0-acf99eef4d8e,"WC compartment doors, and doors to wheelchair-accessible unisex toilets, changing rooms or shower rooms have an emergency release mechanism so that they are capable of being opened outwards, from the outside , in case of emergency.",{'ID': '159_UK_DocM_V2_AccessAndUseOfBuildings'},"WC compartment doors, and <e1>doors</e1> to wheelchair-accessible unisex toilets, <e2>changing rooms</e2> or shower rooms have an emergency release mechanism so that they are capable of being opened outwards, from the outside , in case of emergency.",part-of,annotated
+72d7716f-7e3e-442c-9e42-14d4b19e18e3_7,,,A <e1>area</e1> that is being connected to a new building should not have a <e2>patterns</e2> for delivered heat to the building which is greater than 0.350kgCO2/kWh.,not-part-of,synthetic
+c71c68fe-63ac-400f-b9ca-6e8c20cc5b5e,A conservatory or porch must have thermal separation from the existing dwelling.,{'ID': '431_UK_DocL_V1_ConsrvationOfFuelAndPower'},A <e1>conservatory</e1> or porch must have <e2>thermal separation from the existing dwelling</e2>.,necessity,annotated
+956efc87-87de-4d3c-99fb-dc58eab9353b_3,,,A dwelling that is intended for sheltered housing or supported housing of a person with mobility or functional impairment shall have at least one toilet and washing facility which has a free space with a <e1>design value</e1> of at least <e2>EI 30</e2>.,greater-equal,synthetic
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. <e1>laundry room</e1>; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility <e2>intended for public use</e2>; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",none,annotated
+3f7c10d1-d801-4351-bc85-187cf8cffeb3,The water vapour resistance and air tightness of external walls and their various layers as well as the structures attached to the external wall and joints to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,{'ID': '96_Finnish_Health-Humidity'},The water vapour resistance and air tightness of external walls and their various layers as well as the structures attached to the <e1>external</e1> <e2>wall</e2> and joints to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,selection,annotated
+2de867fe-80e7-4617-ad18-36225dd45ab1_6,,,Hinged or pivot windows with an <e1>patterns</e1> of less than <e2>20 litres per second</e2> are not suitable for purge ventilation.,less,synthetic
+46ee0eda-086a-40ab-8e8f-bfa4c85abd49,"If the indoor access route leading to an evacuation area in a non-residential building is via the indoor stairs in the area, these stairs must be wide enough that they can be used to transport an immobile individual on a stretcher.",{'ID': '16_Finnish_SafetyOfUse'},"If the <e1>indoor</e1> access route <e2>leading to an evacuation area in a non-residential building</e2> is via the indoor stairs in the area, these stairs must be wide enough that they can be used to transport an immobile individual on a stretcher.",none,annotated
+37239af2-8f49-499f-ab25-73f92d7c9369,Each letter should be 25mm high.,{'ID': '117_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},Each <e1>letter</e1> should be 25mm <e2>high</e2>.,part-of,annotated
+5e7d4831-4ec8-48f9-9e60-0422fcc1eae4_5,,,"When replacing an existing system, the <e1>energy  consumption</e1> of the new system should be no less than <e2>surface temperature</e2> of the existing system, except where a smaller system can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",greater-equal,synthetic
+517253f8-98b1-4821-8901-75124d3237db,"Consideration should be given to the provision of a second handrail on stairs in a wide range of building types, and particularly in schools, for use by children and people of short stature.",{'ID': '59_UK_DocM_V2_AccessAndUseOfBuildings'},"Consideration should be given to the provision of a second <e1>handrail</e1> on stairs in a <e2>wide range of building types</e2>, and particularly in schools, for use by children and people of short stature.",none,annotated
+287098c1-9e45-4917-ad34-1301db390c17,"Where it is not reasonable to achieve a step-free approach route to the principal private entrance, a step-free approach route should be provided to a suitable alternative private entrance instead.",{'ID': '41_UK_DocM_V1_AccessAndUseOfBuildings'},"Where it is <e1>not reasonable to achieve a step-free approach route to the principal private entrance</e1>, a <e2>step-free approach route should be provided to a suitable alternative private entrance instead</e2>.",necessity,annotated
+f9de28ac-45bb-4400-9d9f-8afee73bd2e3_9,,,The <e1>centre pane U-value</e1> should not exceed <e2>50 millimetres</e2> of dwelling floor area.,less-equal,synthetic
+0da52584-1b37-48b5-840f-3795ae695275_8,,,the minimum clear dimensions of the platform are: <e1>850-1000mm</e1> <e2>total capital cost</e2> and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+db734798-9e42-4fe1-900c-77d4e6131809,"The main doors for entering a dwelling (usually the front door) should have a door viewer unless other means exist to see callers, such as clear glass within the door or a window next to the doorset.",{'ID': '11_UK_DocQ_Security_Dwellings'},"The <e1>main doors</e1> for entering a dwelling (usually the <e2>front door</e2>) should have a door viewer unless other means exist to see callers, such as clear glass within the door or a window next to the doorset.",selection,annotated
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be class E 15.",{'ID': '134_Finnish_FireSafety'},"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding <e1>two</e1> <e2>storeys</e2> is EI 30; however, minor sealing parts and penetrations may be class E 15.",greater,annotated
+079db365-cfed-474e-9329-25349ac0db4a,"In connection with the door of an outside space of an individual dwelling the level difference outside the door may be more than 20 millimetres if the level difference can, with reasonable effort, be eliminated with equipment in the outdoor space.",{'ID': '21_Finnish_Accessibility'},"In connection with the door of an <e1>outside space</e1> of an individual dwelling the level difference <e2>outside the door</e2> may be more than 20 millimetres if the level difference can, with reasonable effort, be eliminated with equipment in the outdoor space.",none,annotated
+46f5be2a-1514-420b-bc39-331fc6e0d2df_1,,,"The dwelling primary energy rate, <e1>free gap</e1> and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the target primary energy rate, <e2>mechanical ventilation</e2> and target fabric energy efficiency rate, respectively.",less-equal,synthetic
+88e23b46-22d9-4be6-87b7-40541f7995a9,"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the distance of the uppermost floor level from the entry level exceeds 24 metres; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",{'ID': '254_Finnish_FireSafety'},"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the <e1>premises</e1> <e2>above the entry level of the building</e2>, when the distance of the uppermost floor level from the entry level exceeds 24 metres; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",selection,annotated
+b02f9b87-d934-4c2f-8a59-b3b8c0a7be17,"Instantaneous or snapshot CO2 readings can be misleading, so several measurements should be taken throughout the day.",{'ID': '124_UK_DocF_V2_Ventilation'},"<e1>Instantaneous</e1> or snapshot <e2>CO2 readings</e2> can be misleading, so several measurements should be taken throughout the day.",selection,annotated
+a0c838b5-5fe2-4b52-abe1-432804c2c8aa_1,,,A <e1>intended time of use</e1> of 21 C shall be used as the <e2>vertical spacing</e2> for room temperature during the heating season.,equal,synthetic
+f9de28ac-45bb-4400-9d9f-8afee73bd2e3_7,,,The <e1>horizontal spacing</e1> should not exceed <e2>44mm</e2> of dwelling floor area.,less-equal,synthetic
+825053cb-af5d-43a9-b59b-e2a5ae78ea73_0,,,The <e1>energy consumption</e1> of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the <e2>intended purpose</e2> of dwellings in the residential building; b. the number of associated parking spaces.,greater,synthetic
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77,Skirtings totalling up to 50mm total thickness and shallow projecting ducts or casings above 1800mm may be discounted when measuring clear width.,{'ID': '131_UK_DocM_V1_AccessAndUseOfBuildings'},Skirtings totalling up to 50mm total thickness and shallow projecting <e1>ducts</e1> or casings above 1800mm may be <e2>discounted when measuring clear width</e2>.,necessity,annotated
+1913381b-a2cc-496e-9168-82ccf2a01d50,"In connection with repair and alteration work, the heat emitters connected to the domestic hot water ring duct may be replaced so that the heat emission capacity of the heat emitters to be installed does not exceed 200 Watts per room.",{'ID': '67_Finnish_Health-WaterAndSewerage'},"<e1>In connection with repair and alteration work</e1>, the <e2>heat emitters</e2> connected to the domestic hot water ring duct may be replaced so that the heat emission capacity of the heat emitters to be installed does not exceed 200 Watts per room.",selection,annotated
+2ef73ac0-d424-4e28-9782-3dbaf6e0a046,Attics and uppermost floor voids shall be divided into 400 m2 parts.,{'ID': '107_Finnish_FireSafety'},Attics and <e1>uppermost</e1> <e2>floor voids</e2> shall be divided into 400 m2 parts.,selection,annotated
+0ea1e862-2434-4fc8-97a2-b076c992ef20_3,,,"The <e1>sales counter</e1> of an exit must be at least <e2>6m</e2> and its free height must be at least 2,100 millimetres.",greater-equal,synthetic
+63af9f99-6939-4e8c-a6a9-8b10942e1597,"The handle to at least one window in the principal living area is located between 450mm and 1200mm above floor level, unless the window is fitted with a remote opening device that is within this height range.",{'ID': '57_UK_DocM_V1_AccessAndUseOfBuildings'},"The <e1>handle</e1> to at least one window in the principal living area is <e2>located between 450mm and 1200mm above floor level, unless the window is fitted with a remote opening device that is within this height range</e2>.",necessity,annotated
+a48aade7-5532-4424-a39e-5b1638516702,The effective g-value should be no worse than 0.3.,{'ID': '350_UK_DocM_V2_AccessAndUseOfBuildings'},The effective <e1>g-value</e1> should be <e2>no worse than 0.3</e2>.,necessity,annotated
+3724fd47-22f7-432c-81a2-1abcb95c7df2_3,,,"The total number of ventilators installed in a dwellings habitable rooms and kitchens should be no fewer than five, except in <e1>0.055555556</e1> <e2>commissioning plan</e2> properties, where there should be no fewer than four.",equal,synthetic
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_5,,,"The wall ties should have a horizontal spacing of 900mm and a vertical spacing of 450mm, or alternatively should be spaced such that the <e1>diameter</e1> is not less than <e2>40 degrees Celsius</e2>.",greater-equal,synthetic
+7602a501-a5b5-429c-99e1-8bc801243494,"The flooring and wall covering must provide waterproofing, or separate waterproofing must be installed under the flooring and behind the wall covering.",{'ID': '111_Finnish_Health-Humidity'},"The <e1>flooring</e1> and wall covering must <e2>provide waterproofing</e2>, or separate waterproofing must be installed under the flooring and behind the wall covering.",necessity,annotated
+3ac96918-764f-403d-a588-37b5f4a16f46,"For absorption chillers used in conjunction with onsite CHP or a district heat network or community heating system, the CO2 emissions and primary energy should be calculated in the same way as when using CHP for heating.",{'ID': '284_UK_DocM_V2_AccessAndUseOfBuildings'},"For <e1>absorption chillers</e1> <e2>used in conjunction with onsite CHP or a district heat network or community heating system</e2>, the CO2 emissions and primary energy should be calculated in the same way as when using CHP for heating.",selection,annotated
+b51c7a9f-2080-4e60-940f-e59af0cc97ce,"The buildings enclosure together with its construction layers and joints must form a whole, preventing the transfer of water across the surface of the enclosure into the construction by wind, slanting rain and wind pressure.",{'ID': '34_Finnish_Health-Humidity'},"The buildings <e1>enclosure</e1> together with its construction layers and <e2>joints</e2> must form a whole, preventing the transfer of water across the surface of the enclosure into the construction by wind, slanting rain and wind pressure.",part-of,annotated
+1913381b-a2cc-496e-9168-82ccf2a01d50_6,,,"In connection with repair and alteration work, the heat emitters connected to the domestic hot water ring duct may be replaced so that the <e1>Activation</e1> of the heat emitters to be installed does not exceed <e2>8.5m2</e2>.",less-equal,synthetic
+4e8c5c50-44af-48f6-b959-e6f9b31afa1e_11,,,"If the planned time of use of a modular or portable building in a single location is less than two years, the only practical <e1>Staircases</e1> may be <e2>sign</e2>.",equal,synthetic
+2633c957-07b4-4caa-a9d6-5acbac16b0b0,NOTE: Linear interpolation should be used to determine efficiencies between manufacturers declared efficiencies at 30 and 100 load.,{'ID': '245_UK_DocM_V2_AccessAndUseOfBuildings'},NOTE: <e1>Linear interpolation</e1> should be used to determine efficiencies between manufacturers declared efficiencies at 30 and 100 <e2>load</e2>.,part-of,annotated
+05fdde92-d8af-42ad-963b-9019c69a8ab3_2,,,"For a timber frame where the intermediate floor structure breaches the external wall insulation, further insulation of the same <e1>parasitic energy use</e1> as the <e2>buildings </e2> used in the external wall should be included within the depth of the intermediate floor structure.",equal,synthetic
+37f01a2c-b944-45a2-a7f4-140d8c03d7ac,"After rebating, frame components should retain at least 32mm of timber.",{'ID': '29_UK_DocQ_Security_Dwellings'},"After rebating, <e1>frame components</e1> should retain at least <e2>32mm</e2> of timber.",none,annotated
+46f5be2a-1514-420b-bc39-331fc6e0d2df_10,,,"The dwelling primary energy rate, <e1>parasitic energy use</e1> and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the target primary energy rate, <e2>presence</e2> and target fabric energy efficiency rate, respectively.",less-equal,synthetic
+74002ed3-548e-4e2f-8835-be76e643c67d_3,,,NOTE 2: Double doors effectively provide nibs where each leaf is at least <e1>300 litres</e1> <e2>fire resistance time</e2>.,greater-equal,synthetic
+a43037b0-8e35-45a2-9f23-c2d65f6c5a64,"Where access to the dwelling can be gained via an interconnecting doorset from the garage, then either the garage doorset (pedestrian and vehicular) or the interconnecting doorset should be a secure doorset.",{'ID': '8_UK_DocQ_Security_Dwellings'},"Where access to the dwelling can be gained via an interconnecting doorset from the garage, then either the garage doorset (pedestrian and vehicular) or the <e1>interconnecting doorset</e1> should be a <e2>secure doorset</e2>.",necessity,annotated
+973c9430-2b4a-4ab4-82df-7060c3002f77_5,,,The <e1>total capital cost</e1> for the community heating primary circuit should be a minimum of <e2>20 millimetres</e2>.,greater-equal,synthetic
+984c252b-74f4-4d85-9080-1c8ae1851eca_3,,,"If performance requires thicker glass to be used, an equivalent window unit with <e1>control capabilities</e1> (<e2>14 metres</e2>) glazing should be shown to meet the required standard.",equal,synthetic
+aa41a5d4-c0b1-4da7-84a0-5c2e2738654f_3,,,The total number of ventilators installed in the dwellings habitable rooms and kitchens should be at least the following: Five ventilators if the dwelling has more than <e1>five</e1> <e2>Grommets</e2>.,greater,synthetic
+bd1438b0-ce84-4908-8d01-6c0884aa4650,"For roof-lights, U-values should be calculated based on a horizontal position.",{'ID': '111_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For <e1>roof-lights</e1>, <e2>U-values</e2> should be calculated based on a horizontal position.",part-of,annotated
+9f8c2fbb-a04e-42f9-8fa0-b7a905dbafa0,"The ventilation openings or slots leading to the ventilation space or gap of a structure equipped with a ventilation space or gap must be positioned so that the ventilation space or gap is fully usable as a ventilation air flow path and that the ventilation space or gap is free of enclosed, non-ventilated areas.",{'ID': '40_Finnish_Health-Humidity'},"The ventilation openings or slots leading to the ventilation space or gap of a structure equipped with a ventilation space or gap must be positioned so that the <e1>ventilation space or gap</e1> is <e2>fully usable as a ventilation air flow path</e2> and that the ventilation space or gap is free of enclosed, non-ventilated areas.",selection,annotated
+2ff58135-b89d-40d1-a145-51aad9e5a942_11,,,"The landing in front of the outside door shall be at least <e1>800 millimetres</e1> <e2>level difference</e2> and at least 1,500 millimetres long.",greater-equal,synthetic
+3f7c10d1-d801-4351-bc85-187cf8cffeb3,The water vapour resistance and air tightness of external walls and their various layers as well as the structures attached to the external wall and joints to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,{'ID': '96_Finnish_Health-Humidity'},The water vapour resistance and air tightness of external <e1>walls</e1> and their various <e2>layers</e2> as well as the structures attached to the external wall and joints to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,part-of,annotated
+72d7716f-7e3e-442c-9e42-14d4b19e18e3,A district heat network that is being connected to a new building should not have a CO2 emission factor for delivered heat to the building which is greater than 0.350kgCO2/kWh.,{'ID': '336_UK_DocM_V2_AccessAndUseOfBuildings'},A <e1>district heat network</e1> that is being connected to a new building should not have a <e2>CO2 emission factor</e2> for delivered heat to the building which is greater than 0.350kgCO2/kWh.,not-part-of,annotated
+7dbe5dbf-39fb-4ba4-bc75-d6ac7898e615,"U-values for rooflights or rooflight-and-kerb assemblies should be based on the developed surface area of the rooflight (U-values), which is often greater than the area of the roof opening.",{'ID': '114_UK_DocL_V1_ConsrvationOfFuelAndPower'},"U-values for rooflights or <e1>rooflight-and-kerb assemblies</e1> should be <e2>based on the developed surface area of the rooflight (U-values), which is often greater than the area of the roof opening</e2>.",none,annotated
+76bf63bd-30f4-440d-81a0-61ca16170f70_7,,,Control should be maximised and heat gain to uninsulated pipes should only be permitted where the <e1>rated output</e1> is less than <e2>56 metres</e2> of the total load.,less,synthetic
+13a437c0-918c-47f2-85bd-b80dd69eb027_9,,,"There are no <e1>patterns</e1> on the <e2>from the top and bottom corners of the door</e2> of display windows and similar glazing, but for new buildings their impact must be taken into account in the calculation of primary energy and CO2 emissions.",not-part-of,synthetic
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9,"In buildings more than 9 metres and at most 28 metres in height, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",{'ID': '126_Finnish_SafetyOfUse'},"In buildings more than 9 metres and at most 28 metres in height, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than <e1>28 metres</e1> in <e2>height</e2>, these must be accessible via the interior.",greater,annotated
+7f3f59a4-fc7e-4b14-8074-384f6cacf548,"The height of a barrier in a dwellings indoor areas may, however, be at least 0.9 metres if the drop is less than three metres.",{'ID': '45_Finnish_SafetyOfUse'},"The height of a barrier in a dwellings indoor areas may, however, be at least 0.9 metres if the <e1>drop</e1> is less than <e2>three metres</e2>.",less,annotated
+9ff8b8fd-5361-4c3d-9a7e-7459276c8df7_10,,,The <e1>floor  plate areas</e1> must not exceed the individual dwellings <e2>total cost</e2>.,less-equal,synthetic
+b5edf19f-56df-436a-89f0-9ab5bf6963ea,"If necessary, fire compartments shall be partitioned in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",{'ID': '106_Finnish_FireSafety'},"If necessary, <e1>fire compartments</e1> shall be <e2>partitioned</e2> in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",necessity,annotated
+5925ca4d-801c-42e4-b581-a176dea2519f,"If thermal energy is supplied from a district heat network, a CO2 emission factor and primary energy factor for the heat delivered to the dwelling by the district heat network should be calculated.",{'ID': '76_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If <e1>thermal energy</e1> is <e2>supplied from a district heat network</e2>, a CO2 emission factor and primary energy factor for the heat delivered to the dwelling by the district heat network should be calculated.",selection,annotated
+0a6d6be2-bb25-4a7d-ac98-33351e1a2bb7,"Wheelchair-accessible bedrooms should be sufficiently spacious to enable a wheelchair user to transfer to one side of a bed, with or without assistance.",{'ID': '144_UK_DocM_V2_AccessAndUseOfBuildings'},"Wheelchair-accessible <e1>bedrooms</e1> should be <e2>sufficiently spacious to enable a wheelchair user to transfer to one side of a bed, with or without assistance</e2>.",necessity,annotated
+41d06a37-5039-4dc0-aae1-0fe3abbd84fc,The building fabric should be constructed so that the insulation is reasonably continuous across newly built elements.,{'ID': '132_UK_DocL_V1_ConsrvationOfFuelAndPower'},The building fabric should be constructed so that the <e1>insulation</e1> is <e2>reasonably continuous across newly built elements</e2>.,selection,annotated
+dd056285-1aa4-4c6d-94ac-b911458cb7ea,"Where any of the parking spaces for new buildings other than residential or mixed-use buildings are in a covered car park, the requirement to install an electric vehicle charge point should be met by installing a charge point in a parking space that is not within a covered car park.",{'ID': '70_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where any of the <e1>parking spaces</e1> for new buildings other than residential or mixed-use buildings are in a covered car park, the requirement to install an electric vehicle charge point should be <e2>met by installing a charge point in a parking space that is not within a covered car park</e2>.",none,annotated
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_8,,,Skirtings totalling up to <e1>0.05</e1> <e2>atmosphere</e2> and shallow projecting ducts or casings above 1800mm may be discounted when measuring clear width.,less-equal,synthetic
+0fdce0b1-7992-401f-aa84-ad7f2acca23d,Cavity walls: the inner block leaf mortar joint should be fully filled and pointed within the cavity.,{'ID': '184_UK_DocL_V1_ConsrvationOfFuelAndPower'},Cavity walls: the inner <e1>block leaf</e1> <e2>mortar joint</e2> should be fully filled and pointed within the cavity.,part-of,annotated
+5e7d4831-4ec8-48f9-9e60-0422fcc1eae4_3,,,"When replacing an existing system, the <e1>Air flow rates</e1> of the new system should be no less than <e2>total useful floor area</e2> of the existing system, except where a smaller system can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",greater-equal,synthetic
+716fa732-f3c7-43ad-a4e3-fff43a841018,The vehicle traffic area of a building and its courtyard must be safe and appropriate.,{'ID': '131_Finnish_SafetyOfUse'},The vehicle traffic area of a building and its <e1>courtyard</e1> must be <e2>safe</e2> and appropriate.,necessity,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_5,,,"If the air flows of extract air categories 1 and 2 are combined into the same duct and <e1>load</e1> <e2>150m2</e2> air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+29c431ee-ea93-491d-ab13-06418d93c488_9,,,"If <e1>rated output</e1> is greater than <e2>10m</e2>, manual control is acceptable.",greater,synthetic
+fa90c179-d32c-412b-a7d6-a515cc91dbdb,The structure of the exterior wall against the ground must be waterproofed or isolated against water pressure or a structurally managed water removal system allowing the cellar wall to dry in an outward direction must be used to prevent moisture from the surrounding ground and storm water from penetrating the wall structure.,{'ID': '86_Finnish_Health-Humidity'},The structure of the exterior wall against the ground must be waterproofed or <e1>isolated against water pressure</e1> or a structurally managed water removal system allowing the cellar wall to dry in an outward direction must be used to <e2>prevent moisture from the surrounding ground and storm water from penetrating the wall structure</e2>.,none,annotated
+43e26628-8b62-4cc6-91e2-284335df1564_6,,,"In rooms used for sleeping or rest, the <e1>emission rate</e1> may not exceed <e2>2.2 metres</e2>.",less-equal,synthetic
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_0,,,Skirtings totalling up to <e1>0.9 metres</e1> <e2>free gap</e2> and shallow projecting ducts or casings above 1800mm may be discounted when measuring clear width.,less-equal,synthetic
+a235c68f-ae44-4770-b005-4e9d7b659eb7_7,,,All cavity walls should have leaves at least <e1>two years</e1> <e2>Extract</e2> and cavities at least 50mm wide.,greater-equal,synthetic
+2b60007d-59a3-4a18-a184-89e76ee17454,Masonry construction: external or cavity wall insulation should extend below the damp-proof course (where applicable) and be at least the equivalent of one full block height (215mm) below the underside of the floor structure/slab and beyond the depth of the floor insulation.,{'ID': '161_UK_DocL_V1_ConsrvationOfFuelAndPower'},Masonry construction: <e1>external</e1> or cavity <e2>wall</e2> insulation should extend below the damp-proof course (where applicable) and be at least the equivalent of one full block height (215mm) below the underside of the floor structure/slab and beyond the depth of the floor insulation.,selection,annotated
+86831830-e7f0-4b90-aa27-dc0542b7ba4d_0,,,"If a residential block of flats does not have a lift, the stairs between floor levels must have natural light and at least <e1>B</e1> <e2>automatic flow adjustment</e2>.",greater-equal,synthetic
+0ea1e862-2434-4fc8-97a2-b076c992ef20_10,,,"The <e1>speed</e1> of an exit must be at least <e2>10m</e2> and its free height must be at least 2,100 millimetres.",greater-equal,synthetic
+76bf63bd-30f4-440d-81a0-61ca16170f70,Control should be maximised and heat gain to uninsulated pipes should only be permitted where the proportion of the cooling load relating to distribution pipework is less than 1 of the total load.,{'ID': '177_UK_DocM_V2_AccessAndUseOfBuildings'},Control should be maximised and heat gain to uninsulated <e1>pipes</e1> should only be permitted where the proportion of the cooling load relating to distribution pipework is less than 1 of the <e2>total load</e2>.,none,annotated
+eeb4239f-3819-475c-ad20-756bed80c4ff_4,,,"In reference heat loss calculations, the value used as the <e1>directions</e1> of the buildings ventilation system shall be <e2>1</e2>.",equal,synthetic
+e8340500-38b6-461b-b00d-d3aa44ac1f0b_8,,,The <e1>extends</e1> of the water available from the hot water system may not exceed <e2>650mm</e2>.,less-equal,synthetic
+00cded8a-5208-4c1b-bda4-9677d45b9375,The layers of attic floor structures and the ventilation must prevent the accumulation of damaging moisture into the roof structure resulting from water vapour diffusion or airflow.,{'ID': '105_Finnish_Health-Humidity'},The layers of <e1>attic</e1> floor structures and the ventilation must <e2>prevent the accumulation of damaging moisture into the roof structure resulting from water vapour diffusion or airflow</e2>.,none,annotated
+46f5be2a-1514-420b-bc39-331fc6e0d2df_10,,,"The dwelling primary energy rate, dwelling emission rate and <e1>energy savings</e1>, all calculated using the measured air permeability, must not be higher than the target primary energy rate, target emission rate and <e2>domestic hot water circulation heat loss</e2>, respectively.",less-equal,synthetic
+8151be81-09ad-4dac-b2d2-f0d757915b6c,"However, when the snow load can occur, the minimum value of the load s should be at least 0.5 kN/m2.",{'ID': '110_Finnish_StabilityOfStructures'},"However, when the snow load can occur, the <e1>minimum value</e1> of the load s should be at least <e2>0.5 kN/m2</e2>.",greater-equal,annotated
+dd056285-1aa4-4c6d-94ac-b911458cb7ea,"Where any of the parking spaces for new buildings other than residential or mixed-use buildings are in a covered car park, the requirement to install an electric vehicle charge point should be met by installing a charge point in a parking space that is not within a covered car park.",{'ID': '70_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where any of the parking spaces for <e1>new</e1> <e2>buildings</e2> other than residential or mixed-use buildings are in a covered car park, the requirement to install an electric vehicle charge point should be met by installing a charge point in a parking space that is not within a covered car park.",selection,annotated
+0da52584-1b37-48b5-840f-3795ae695275_6,,,"the minimum clear dimensions of the platform are: <e1>1,200 millimetres</e1> <e2>diameter</e2> and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.",equal,synthetic
+8207751f-13b8-4fe3-9bfe-4423093d4905_4,,,A building with dwellings or accommodation or patient rooms shall be designed and implemented so that the <e1>speed</e1> of the staircase and exit route is no more than <e2>850 millimetres</e2>.,less-equal,synthetic
+3ca5cb38-b90b-4449-ba14-4268866df8e1_1,,,The water heater is close to the draw-off points and has a <e1>means</e1> no greater than <e2>50 m</e2>.,less-equal,synthetic
+f5a71c7b-e852-40f2-8f88-91cda7902a7e,"If a new building has a space heating or airconditioning system with an effective rated output greater than 180kW, a building automation and control system should be installed.",{'ID': '319_UK_DocM_V2_AccessAndUseOfBuildings'},"If a new <e1>building</e1> has a <e2>space heating or airconditioning system</e2> with an effective rated output greater than 180kW, a building automation and control system should be installed.",part-of,annotated
+7e34700e-92de-4b00-a820-f4085a2e186c_7,,,"If the free gap between facing walls of adjacent glazed balconies or the <e1>Control</e1> of the wall to the window of an adjacent fire compartment is less than <e2>50mm</e2>, the wall in question must be class EI 15.",less,synthetic
+e061791c-7881-43fe-a272-beec4a972b0c,The panel should be securely held in place.,{'ID': '31_UK_DocQ_Security_Dwellings'},The <e1>panel</e1> should be <e2>securely held in place</e2>.,necessity,annotated
+c47598f9-df79-4d77-aba9-8f380342372f_2,,,extract air of <e1>capacity</e1> <e2>650mm</e2> shall be conducted to the outdoors through individual extract air ducts.,equal,synthetic
+9eb5bf01-3810-44e3-802b-7c7eadad1831,"Mechanical ventilation systems, including both continuous and intermittent mechanical ventilation, should be designed and installed to minimise noise.",{'ID': '21_UK_DocF_V1_Ventilation'},"Mechanical ventilation systems, including both continuous and <e1>intermittent</e1> <e2>mechanical ventilation</e2>, should be designed and installed to minimise noise.",selection,annotated
+8207751f-13b8-4fe3-9bfe-4423093d4905,A  building  with  dwellings  or  accommodation  or  patient  rooms  shall  be  designed  and implemented so that the reverberation time of the staircase and exit route is no more than 1.3 seconds.,{'ID': '26_Finnish_AcousticEnvironment'},A building with dwellings or accommodation or <e1>patient rooms</e1> shall be <e2>designed and implemented</e2> so that the reverberation time of the staircase and exit route is no more than 1.3 seconds.,none,annotated
+825053cb-af5d-43a9-b59b-e2a5ae78ea73,The total number of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the number of dwellings in the residential building; b. the number of associated parking spaces.,{'ID': '59_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},The <e1>total number</e1> of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the number of dwellings in the residential building; b. the <e2>number</e2> of associated parking spaces.,greater,annotated
+2a2dbb92-88af-47f5-bd1e-b3ddea4c1ec9,"The approach route should be safe and convenient for everyone, be at the shallowest gradient that can reasonably be achieved, and be stepfree, irrespective of the storey on which the dwelling is located.",{'ID': '70_UK_DocM_V1_AccessAndUseOfBuildings'},"The <e1>approach route</e1> should be safe and convenient for everyone, <e2>be at the shallowest gradient that can reasonably be achieved</e2>, and be stepfree, irrespective of the storey on which the dwelling is located.",necessity,annotated
+0ab44f38-4588-4f61-ad7e-21a4a25df17d,Calibration should be carried out in accordance with CIBSEs TM23.,{'ID': '342_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Calibration</e1> should be <e2>carried out in accordance with CIBSEs TM23</e2>.,necessity,annotated
+34a524ec-6994-426f-86af-78788fd34a80_11,,,"Between the locking points for the mortice lock and surface-mounted rim lock, the <e1>heat recovery</e1> should be <e2>0.055555556</e2>.",equal,synthetic
+636bce88-fd3b-4e5a-9f6a-4aa0d3d1bfa4_2,,,"Where a new building contains more than <e1>900 millimetres</e1> <e2>teaching facility</e2>, a common access point for a gigabit-capable public electronic communications network is required as a part of the buildings gigabit-ready physical infrastructure.",greater,synthetic
+ff3e8f86-1542-4f54-a776-cfdc8482bad7,The seasonal energy efficiency ratio of an air conditioner working in cooling mode should be a minimum of 4.0.,{'ID': '332_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>seasonal energy efficiency ratio</e1> of an air conditioner working in cooling mode should be a minimum of <e2>4.0</e2>.,greater-equal,annotated
+4abb3268-3ba6-47e8-a8b7-4676dbaa9a16_3,,,"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide all means of escape routes with a minimum clear <e1>construction</e1> of <e2>150m2</e2>, except in doorways.",equal,synthetic
+2032e456-bf80-4342-90dc-0da164e00a9a,A unit that contains both living accommodation and space for commercial purposes (e.g. for a workshop or office) should be treated as a dwelling if the commercial part can be reverted to domestic use.,{'ID': '7_UK_DocF_V1_Ventilation'},A <e1>unit</e1> that contains both living accommodation and <e2>space for commercial purposes</e2> (e.g. for a workshop or office) should be treated as a dwelling if the commercial part can be reverted to domestic use.,part-of,annotated
+1d18f0c9-31e5-43ee-8f16-e4fa607c5cd9,"The same approved calculation tool must be used to calculate the target primary energy rate, the target emission rate, the building primary energy rate and the building emission rate.",{'ID': '51_UK_DocM_V2_AccessAndUseOfBuildings'},"The same <e1>approved</e1> <e2>calculation tool</e2> must be used to calculate the target primary energy rate, the target emission rate, the building primary energy rate and the building emission rate.",selection,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",{'ID': '84_Finnish_Health-IndoorClimateAndVentilation'},"If the air flows of extract air categories 1 and <e1>2</e1> are combined into the same duct and category 2 air flow accounts for more than 10 of the combined <e2>air flow</e2>, the combined air flow is classified under category 2.",none,annotated
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the <e1>premises</e1> to be fitted with a floor drain shall be: 1. showers and <e2>bathrooms</e2> as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",necessity,annotated
+7e34700e-92de-4b00-a820-f4085a2e186c_2,,,"If the <e1>agreed level of provision</e1> between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than <e2>400 millimetres</e2>, the wall in question must be class EI 15.",less,synthetic
+1d18f0c9-31e5-43ee-8f16-e4fa607c5cd9,"The same approved calculation tool must be used to calculate the target primary energy rate, the target emission rate, the building primary energy rate and the building emission rate.",{'ID': '51_UK_DocM_V2_AccessAndUseOfBuildings'},"The <e1>same</e1> approved <e2>calculation tool</e2> must be used to calculate the target primary energy rate, the target emission rate, the building primary energy rate and the building emission rate.",selection,annotated
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab_1,,,"If the <e1>above</e1> of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds <e2>1,500 millimetres</e2> of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",greater,synthetic
+51284e52-f2f4-41b5-85e2-3fa96ab8602a,"All users of facilities should be able to locate suitable seating and move safely and easily to and from the seating area and ancillary accommodation, such as lavatories, dining rooms and bedroom suites.",{'ID': '132_UK_DocM_V2_AccessAndUseOfBuildings'},"All <e1>users</e1> of facilities should be <e2>able to locate suitable seating</e2> and move safely and easily to and from the seating area and ancillary accommodation, such as lavatories, dining rooms and bedroom suites.",necessity,annotated
+a5e9c36f-358f-4375-943c-6d5b89c82647,"Any abrupt level differences of over 0.7 metres and any precipices located in the vicinity of common play and recreation areas associated with buildings with more than two dwellings must be indicated by appropriate barriers or suitable planted areas, or outfitted with a base that cushions any fall.",{'ID': '92_Finnish_SafetyOfUse'},"Any <e1>abrupt</e1> level differences of over 0.7 metres and any precipices located in the vicinity of common play and recreation areas associated with buildings with more than <e2>two</e2> dwellings must be indicated by appropriate barriers or suitable planted areas, or outfitted with a base that cushions any fall.",none,annotated
+2ff58135-b89d-40d1-a145-51aad9e5a942_7,,,"The landing in front of the outside door shall be at least <e1>2.2 metres</e1> <e2>time-lapse</e2> and at least 1,500 millimetres long.",greater-equal,synthetic
+2ca092ec-4425-4552-a389-fd0dadfbd154_8,,,NOTE: A floor level with a <e1>ventilation provision</e1> of <e2>40</e2> or steeper should be designed as a ramp.,greater-equal,synthetic
+8aad11d6-bd81-4a57-bd73-7c1319a76494,"Where on-site electricity generation and storage is installed, such as photovoltaic panels or battery storage, systems should be an appropriate size for the site, available infrastructure and on-site energy demand.",{'ID': '331_UK_DocM_V2_AccessAndUseOfBuildings'},"Where on-site electricity generation and storage is installed, such as photovoltaic panels or battery storage, <e1>systems</e1> should <e2>be an appropriate size for the site, available infrastructure and on-site energy demand</e2>.",necessity,annotated
+11f2902d-29c2-474e-97d0-628a2a97a666_8,,,"<e1>fire performance</e1> of over <e2>1,200 millimetres</e2> must be equipped with an appropriate safety barrier, railing or handrail.",greater,synthetic
+40b40b1b-d1b1-49d8-b9b7-13c5845a169d,The structure of the control appliance of the plumbing fixture shall be such that its surface temperature does not arise above 40 degrees Celsius.,{'ID': '71_Finnish_Health-WaterAndSewerage'},The structure of the control appliance of the plumbing fixture shall be such that its <e1>surface temperature</e1> does not arise above <e2>40 degrees Celsius</e2>.,less-equal,annotated
+208b093d-361f-4aec-819d-4abca4e72c68_2,,,"in an evacuation area where the <e1>power input from controls</e1> is <e2>270 millimetres</e2>, the second exit may be no less than 900 millimetres in width.",equal,synthetic
+d7b27bbb-ac51-4036-8073-d094cbe994db,"In cases where the Energy Related Products Regulations and the Building Regulations both apply, both standards should be met.",{'ID': '232_UK_DocM_V2_AccessAndUseOfBuildings'},"In cases where the Energy Related Products Regulations and the Building Regulations both apply, both <e1>standards</e1> should be <e2>met</e2>.",necessity,annotated
+a0c838b5-5fe2-4b52-abe1-432804c2c8aa,A temperature of 21 C shall be used as the design value for room temperature during the heating season.,{'ID': '33_Finnish_Health-IndoorClimateAndVentilation'},A temperature of 21 C shall be used as the <e1>design value</e1> for <e2>room temperature</e2> during the heating season.,part-of,annotated
+6d9a1e8e-6fe7-4234-951a-96fdc4598bd7_11,,,"If parking spaces are provided for a building, an adequate number of <e1>Turning circle</e1>, but at least <e2>800 millimetres</e2>, shall be intended for the use of a person with mobility and functional impairment.",greater-equal,synthetic
+f9de28ac-45bb-4400-9d9f-8afee73bd2e3_0,,,The <e1>axle group load</e1> should not exceed <e2>190 kN</e2> of dwelling floor area.,less-equal,synthetic
+73efbdcb-2751-4f01-9471-ccca44ccc0f3,"If a drainage point is located below the height of backwater, the waste water must be pumped.",{'ID': '133_Finnish_Health-WaterAndSewerage'},"If a <e1>drainage point</e1> is located below the height of backwater, the <e2>waste water</e2> must be pumped.",part-of,annotated
+f41fb8da-16bd-4404-accb-e32727f3736a,"Windows, glass walls and glass doors into which there is a danger of collision must be marked in such a way that they can be easily noticed.",{'ID': '69_Finnish_SafetyOfUse'},"Windows, glass walls and glass <e1>doors</e1> into which there is a danger of collision must be <e2>marked in such a way that they can be easily noticed</e2>.",necessity,annotated
+7f3f59a4-fc7e-4b14-8074-384f6cacf548,"The height of a barrier in a dwellings indoor areas may, however, be at least 0.9 metres if the drop is less than three metres.",{'ID': '45_Finnish_SafetyOfUse'},"The height of a barrier in a <e1>dwellings</e1> indoor areas may, however, be at least 0.9 metres if the <e2>drop</e2> is less than three metres.",none,annotated
+c952db0f-b605-4335-8d56-97fc339ad5ba_0,,,All <e1>two persons per square metre</e1> <e2>Insulating materials</e2> of the installation and commissioning checklist should be completed.,equal,synthetic
+079db365-cfed-474e-9329-25349ac0db4a_4,,,"In connection with the door of an outside space of an individual dwelling the <e1>travel distance</e1> outside the door may be more than <e2>900-1000mm</e2> if the level difference can, with reasonable effort, be eliminated with equipment in the outdoor space.",greater,synthetic
+ebc429f0-cb90-41ab-9a11-401a2ddc7bad,"For continuous mechanical ventilation systems, such as continuous mechanical extract ventilation or mechanical ventilation with heat recovery, the system should be balanced to achieve design air flow rates at each room terminal.",{'ID': '268_UK_DocF_V1_Ventilation'},"For continuous mechanical ventilation systems, such as continuous mechanical extract ventilation or <e1>mechanical</e1> <e2>ventilation</e2> with heat recovery, the system should be balanced to achieve design air flow rates at each room terminal.",selection,annotated
+7d7d55f1-b28d-4ce8-aec6-dd4dc0786ce8,"For sizes of cylinder not listed, the heat loss from the cylinder should not exceed (16.66 8.33 V0.4)/(1000 24), where V is the volume in litres.",{'ID': '208_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For sizes of <e1>cylinder</e1> not listed, the heat loss <e2>from the cylinder</e2> should not exceed (16.66 8.33 V0.4)/(1000 24), where V is the volume in litres.",none,annotated
+26980508-105c-49db-8595-bf001a48d757_6,,,"In <e1>Ladders</e1> with no fixed seats or <e2>handrail</e2>, the number of persons shall be calculated to be two persons per square metre.",not-part-of,synthetic
+51f35d58-c411-4d6d-b36e-9ddf10199908,"Whatever lifting device is chosen, internal stairs should always be provided as an alternative means of vertical access, and designed to suit ambulant disabled people and those with impaired sight.",{'ID': '106_UK_DocM_V2_AccessAndUseOfBuildings'},"Whatever <e1>lifting device</e1> is <e2>chosen</e2>, internal stairs should always be provided as an alternative means of vertical access, and designed to suit ambulant disabled people and those with impaired sight.",selection,annotated
+103f99ad-884b-4bae-9f22-ccb1c5bc3d26_4,,,"In an open garage of no more than <e1>40</e1> <e2>sheathing board</e2>, the maximum area may be used as the surface area of the storeys, even though the driveways between the various storeys are combined.",less-equal,synthetic
+2633c957-07b4-4caa-a9d6-5acbac16b0b0_9,,,NOTE: Linear interpolation should be used to determine efficiencies between manufacturers declared efficiencies at 30 and <e1>400-600mm</e1> <e2>storage capacity</e2>.,equal,synthetic
+6414854d-01f9-481f-a7f4-c4581e48d8b1_4,,,Special safety features are not necessary if the <e1>timber frame</e1> is not more than <e2>A</e2> long.,less-equal,synthetic
+9415ae4b-7a74-4c70-a245-e4381c6d71bf_4,,,"At gables and party walls, insulation should extend to the wall; if the <e1>cubicles</e1> between the wall and joist is less than <e2>eight per cent</e2>, perimeter insulation may be required.",less,synthetic
+c8a048c6-8e7e-4b5a-ada5-02990b983401,"A natural ventilation system, a mechanical extract ventilation system or a mechanical supply and extract ventilation system shall not be designed to be combined in such a way that the directions of air flow between the rooms and in the ductworks may change when the air flows are being controlled.",{'ID': '91_Finnish_Health-IndoorClimateAndVentilation'},"A natural ventilation system, a mechanical extract ventilation system or a mechanical <e1>supply and extract ventilation system</e1> shall <e2>not be designed to be combined in such a way that the directions of air flow between the rooms and in the ductworks may change when the air flows are being controlled</e2>.",necessity,annotated
+b51c7a9f-2080-4e60-940f-e59af0cc97ce,"The buildings enclosure together with its construction layers and joints must form a whole, preventing the transfer of water across the surface of the enclosure into the construction by wind, slanting rain and wind pressure.",{'ID': '34_Finnish_Health-Humidity'},"The buildings enclosure together with its construction layers and <e1>joints</e1> must <e2>form a whole, preventing the transfer of water across the surface of the enclosure into the construction by wind, slanting rain and wind pressure</e2>.",necessity,annotated
+86350df0-a40e-412b-a301-004524d56736_11,,,"For wet heating systems in new dwellings with a <e1>total combined window area</e1> of <e2>15 degrees</e2> or greater, a minimum of two independently controlled heating circuits should be provided.",greater-equal,synthetic
+6187cad8-0d6d-4154-b98b-7285b36fea8d,Continuously running fans should be set up to operate without occupant intervention but may have manual or automatic controls for selecting the high rate of operation.,{'ID': '65_UK_DocF_V1_Ventilation'},Continuously running <e1>fans</e1> should be set up to operate without occupant intervention but may have manual or automatic <e2>controls</e2> for selecting the high rate of operation.,necessity,annotated
+2de867fe-80e7-4617-ad18-36225dd45ab1_9,,,Hinged or pivot windows with an <e1>free gap</e1> of less than <e2>two</e2> are not suitable for purge ventilation.,less,synthetic
+4d80c4d1-08ee-481a-9f9c-e9151ce1094d_0,,,"The <e1>operation</e1> of windows, roof windows, rooflights and doors should not exceed <e2>between 550mm and 700mm</e2> of the total floor area of the dwelling.",less-equal,synthetic
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_9,,,"The wall ties should have a horizontal spacing of 900mm and a <e1>tie force</e1> of <e2>850-1000mm</e2>, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",equal,synthetic
+a86b58e8-046f-44b7-8e1b-00c876c8c647_10,,,"Parapets in <e1>number of occupants</e1> A to <e2>90mm</e2> and panel parts of walls acting as parapets, as well as their fasteners, shall be designed to the concentrated load Qk = 0.3 kN acting on a random spot.",less-equal,synthetic
+01008f69-874b-443e-bcb2-2f5630280049,"If stairs are used only as an emergency exit and if they lead to spaces in a dwelling or accommodation facility other than those that are necessary for living, the riser may be no more than 220 millimetres and the tread must be no less than 220 millimetres.",{'ID': '24_Finnish_SafetyOfUse'},"If <e1>stairs</e1> are used only as an emergency exit and if they lead to spaces in a dwelling or accommodation facility other than those that are necessary for living, the riser may be no more than 220 millimetres and the tread must be no less than <e2>220 millimetres</e2>.",none,annotated
+a52847f2-243e-44ed-b4b4-db3e948dd820,The water system shall be designed so as to prevent detrimental cross-flow of water from the hot water pipe to the cold water pipe or vice versa.,{'ID': '63_Finnish_Health-WaterAndSewerage'},The <e1>water system</e1> shall be <e2>designed so as to prevent detrimental cross-flow of water from the hot water pipe to the cold water pipe or vice versa</e2>.,necessity,annotated
+4e4fdf56-c45b-4d89-b18f-7a2f24a41ba9_2,,,"In spaces intended for more than 60 persons, the <e1>U-value</e1> of the access route must be at least <e2>10 kN</e2>.",greater-equal,synthetic
+53b7d989-c81f-4e01-a5ec-4b2cb30b4bfa,The size of a fire compartment must be limited so that a fire igniting in the compartment does not cause unreasonably vast damages (compartmentation by area).,{'ID': '104_Finnish_FireSafety'},The size of a fire compartment must be limited so that a <e1>fire igniting</e1> in the <e2>compartment</e2> does not cause unreasonably vast damages (compartmentation by area).,part-of,annotated
+73a6e4e0-c157-4cae-bc28-c0788f6a1e53,"Activation (e.g. motion sensors and push buttons), safety features and the time-lapse allowed for entry and exit through powered door systems should be carefully considered to suit the needs of people who cannot react quickly.",{'ID': '73_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Activation</e1> (e.g. motion sensors and push buttons), safety features and the time-lapse allowed for <e2>entry</e2> and exit through powered door systems should be carefully considered to suit the needs of people who cannot react quickly.",part-of,annotated
+02648917-f651-4c45-9449-1623cafd6cdc,Public Health Englands Indoor Air Quality Guidelines for Selected Volatile Organic Compounds (VOCs) in the UK should be used.,{'ID': '118_UK_DocF_V2_Ventilation'},<e1>Public Health Englands Indoor Air Quality Guidelines</e1> for <e2>Selected Volatile Organic Compounds (VOCs) in the UK</e2> should be used.,selection,annotated
+922bf8df-3a70-4f45-8c04-200b638d3b3c_7,,,The cold water pipe shall be designed and installed so that the <e1>maximum number of occupants</e1> in the cold water system may not exceed <e2>20mm</e2>.,less-equal,synthetic
+e8340500-38b6-461b-b00d-d3aa44ac1f0b_5,,,The <e1>structure</e1> of the water available from the hot water system may not exceed <e2>1000m2</e2>.,less-equal,synthetic
+a235c68f-ae44-4770-b005-4e9d7b659eb7,All cavity walls should have leaves at least 90mm thick and cavities at least 50mm wide.,{'ID': '35_UK_DocA_Structure'},All <e1>cavity walls</e1> should have <e2>leaves</e2> at least 90mm thick and cavities at least 50mm wide.,necessity,annotated
+4e8c5c50-44af-48f6-b959-e6f9b31afa1e_1,,,"If the planned time of use of a modular or portable building in a single location is less than two years, the only practical <e1>Products</e1> may be <e2>panel parts</e2>.",equal,synthetic
+e68377dd-acec-4915-a0b4-a5eb8c840bf1,"Where vehicle barriers are necessary, sufficient space (for example 500mm) should be allowed around the future connection location.",{'ID': '121_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where vehicle barriers are necessary, <e1>sufficient</e1> <e2>space</e2> (for example 500mm) should be allowed around the future connection location.",selection,annotated
+50e89a86-e2be-439d-b230-79274cd7199b_2,,,Modular and portable buildings with a planned <e1>Moisture</e1> of more than <e2>2.4 metres</e2> at a single location should be shown to comply with the energy efficiency requirements.,greater,synthetic
+29957187-5bca-4da2-b309-4b7ea2fdbf55,Provision shall be made for powered doors and gates to be opened in the event of a power failure.,{'ID': '115_UK_DocK_ProtectionFromFalling'},<e1>Provision</e1> shall be <e2>made for powered doors and gates to be opened in the event of a power failure</e2>.,necessity,annotated
+9415ae4b-7a74-4c70-a245-e4381c6d71bf,"At gables and party walls, insulation should extend to the wall; if the space between the wall and joist is less than 100mm, perimeter insulation may be required.",{'ID': '170_UK_DocL_V1_ConsrvationOfFuelAndPower'},"At gables and party walls, insulation should extend to the wall; if the space between the wall and joist is less than 100mm, <e1>perimeter insulation</e1> may be <e2>required</e2>.",necessity,annotated
+fb5d3054-4911-4049-ba09-1c3e80f9c07c_7,,,"The <e1>output</e1> of steps in uncovered or unheated outdoor staircases must be no less than <e2>15 degrees</e2>, and the riser may be no more than 130 millimetres.",greater-equal,synthetic
+d48274a1-bd70-4db9-8490-14075029cbb7,All users including wheelchair users should be able to reach and use the controls that summon and direct the lifting device.,{'ID': '109_UK_DocM_V2_AccessAndUseOfBuildings'},All <e1>users</e1> including wheelchair users should be <e2>able to reach and use the controls that summon and direct the lifting device</e2>.,necessity,annotated
+8cef7dc5-2d76-4dd8-80c5-6861b11a8f6f_9,,,"Where the work concerns a building containing more than <e1>01:20:00</e1> <e2>joints</e2>, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",greater-equal,synthetic
+5e51b653-449e-4d00-be19-0e20ecff5c49,The default condition should be off.,{'ID': '213_UK_DocM_V2_AccessAndUseOfBuildings'},The <e1>default</e1> <e2>condition</e2> should be off.,selection,annotated
+35cacecf-06dc-4b0f-aadb-db2ee05518c7,The area of windows and roof windows (but excluding display windows) within the area served exceeds 40 of the facade area.,{'ID': '495_UK_DocM_V2_AccessAndUseOfBuildings'},The area of windows and roof windows (but excluding display windows) within the area served exceeds <e1>40</e1> of the <e2>facade area</e2>.,selection,annotated
+825053cb-af5d-43a9-b59b-e2a5ae78ea73_5,,,The <e1>ventilation provision</e1> of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the <e2>air tightness</e2> of dwellings in the residential building; b. the number of associated parking spaces.,greater,synthetic
+99a53f17-48cb-4012-a47b-700761e0983b,Where a new building which is not a residential building or a mixed-use building has more than 10 parking spaces (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,{'ID': '61_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},Where a new building which is not a residential building or a mixed-use building has more than <e1>10</e1> <e2>parking spaces</e2> (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,greater,annotated
+3c0a8ccb-d813-40fb-b69b-88250d3bc4ec_1,,,These fittings should not exceed a <e1>means</e1> of <e2>four</e2>.,less-equal,synthetic
+203faa23-7b71-47c9-a6e5-2333ac45389e_0,,,"The riser of the indoor steps of dwelling units and living quarters may be no more than 190 millimetres, and the <e1>intended time of use</e1> must be no less than <e2>900 millimetres</e2>.",greater-equal,synthetic
+dcc583b1-8c4c-42cf-a1ed-e8907de56254_4,,,"The rise of the indoor steps of other spaces intended for everyday use may be no more than 180 millimetres, and the <e1>maximum number of occupants</e1> must be no less than <e2>0.1m2</e2>.",greater-equal,synthetic
+80221d2c-8ba8-4700-b219-c35fde50f35e,No more than two drainage wells may be connected to a floor drain and they may be located at a maximum distance of three meters from the floor drain.,{'ID': '125_Finnish_Health-WaterAndSewerage'},No more than two <e1>drainage wells</e1> may be connected to a floor drain and they may be <e2>located at a maximum distance of three meters from the floor drain</e2>.,necessity,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_7,,,"If the air flows of <e1>width</e1> 1 and <e2>60 persons</e2> are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+8c79efc1-f3e8-4394-ae6a-0bf5432ebcc5,NOTE: Ventilation through infiltration should be considered to be part of the ventilation provision of a dwelling.,{'ID': '131_UK_DocF_V1_Ventilation'},NOTE: <e1>Ventilation</e1> through infiltration should be considered to be part of the <e2>ventilation provision</e2> of a dwelling.,necessity,annotated
+10b2bf58-18df-46ee-a766-ed11eec6f42b,"Humus soil, organic substances decomposing or rotting from moisture or building waste must not be left under new buildings, in their crawl spaces and in their gravel backfills functioning as a drainage layer.",{'ID': '45_Finnish_Health-Humidity'},"Humus soil, <e1>organic substances</e1> decomposing or rotting from moisture or building waste must <e2>not be left under new buildings, in their crawl spaces and in their gravel backfills functioning as a drainage layer</e2>.",necessity,annotated
+2f8d4247-e53b-49ae-bd26-c4f1765eaee8,"Extract air of categories 2, 3 and 4 shall not be used as recirculation air.",{'ID': '73_Finnish_Health-IndoorClimateAndVentilation'},"<e1>Extract air</e1> of categories 2, 3 and <e2>4</e2> shall not be used as recirculation air.",none,annotated
+f72a98f3-b7d2-4633-b244-0d7242dfb0c9_10,,,Every single bedroom has a minimum <e1>sunken area</e1> of <e2>0.7W/(m2K)</e2> and is at least 2.4m wide.,greater-equal,synthetic
+19478a13-7457-4dd3-a394-744f826db7b0_1,,,"The handle to at least <e1>2.4m</e1> <e2>central heating</e2> in the principal living area is 700-1000mm above floor level, unless fitted with a remote opening device that is within this height range.",greater-equal,synthetic
+7d7d55f1-b28d-4ce8-aec6-dd4dc0786ce8,"For sizes of cylinder not listed, the heat loss from the cylinder should not exceed (16.66 8.33 V0.4)/(1000 24), where V is the volume in litres.",{'ID': '208_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For sizes of cylinder not listed, the <e1>heat loss</e1> from the cylinder should not exceed <e2>(16.66 8.33 V0.4)/(1000 24)</e2>, where V is the volume in litres.",less-equal,annotated
+7575211d-616b-42bb-b112-73a949e7ca6a,Any combined facility should be divided into distinct wet and dry areas.,{'ID': '176_UK_DocM_V2_AccessAndUseOfBuildings'},Any combined <e1>facility</e1> should be <e2>divided into distinct wet and dry areas</e2>.,necessity,annotated
+7f49ccb1-ce2c-47eb-8b22-2c8e806e5d88_4,,,The resilient layer should be to the full height of the door and <e1>5m</e1> <e2>inaccuracies</e2> of the doorset.,equal,synthetic
+a94b6b4f-a05e-403e-bbca-ebe1b94e38a1,"The area of sloping surfaces such as staircases, galleries, raked auditoria and tiered terraces should be taken as their area on plan.",{'ID': '470_UK_DocM_V2_AccessAndUseOfBuildings'},"The area of <e1>sloping surfaces</e1> such as staircases, galleries, raked auditoria and <e2>tiered terraces</e2> should be taken as their area on plan.",selection,annotated
+8efb6108-e49e-4d64-a1e4-22e3f9128b17_5,,,"When calculating the reference heat loss of a building, the value of <e1>1,500 millimetres</e1> shall be used as the <e2>air distribution</e2> for the air leakage rate figure for the building envelope.",equal,synthetic
+38cd3221-7fc9-4462-be20-78b16a4309d3,The area of openings in the newly created dwelling should not be more than 25 of the total floor area.,{'ID': '490_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>area</e1> of <e2>openings</e2> in the newly created dwelling should not be more than 25 of the total floor area.,part-of,annotated
+2de867fe-80e7-4617-ad18-36225dd45ab1_11,,,Hinged or pivot windows with an <e1>level difference</e1> of less than <e2>180kW</e2> are not suitable for purge ventilation.,less,synthetic
+0667134c-1290-4fe0-99eb-41c0b9e63a27,CO2 emissions and primary energy associated with the thermal energy streams of a trigeneration scheme should be attributed in proportion to the output energy streams.,{'ID': '67_UK_DocM_V2_AccessAndUseOfBuildings'},CO2 emissions and primary energy associated with the <e1>thermal energy streams</e1> of a <e2>trigeneration scheme</e2> should be attributed in proportion to the output energy streams.,part-of,annotated
+f439dcde-3cf9-4b40-b555-a2107ae5559f,"If  the  circulation  piping  is  located inside the building envelope, 50 of the calculated domestic hot water circulation heat loss shall  be  added  to  the  thermal  load  of  the  spaces  of  the  building.",{'ID': '104_Finnish_EnergyEfficiency'},"If the <e1>circulation piping</e1> is located inside the building envelope, 50 of the calculated domestic hot water circulation heat loss shall be <e2>added to the thermal load of the spaces of the building</e2>.",none,annotated
+74b9ee2c-0192-442d-b5a1-a2974d456429,"The dwelling is wheelchair adaptable such that key parts of the accommodation, including sanitary facilities and kitchens, could be easily altered to meet the needs of a wheelchair user or, where required by a local planning authority, the dwelling is wheelchair accessible.",{'ID': '67_UK_DocM_V1_AccessAndUseOfBuildings'},"The dwelling is wheelchair adaptable such that <e1>key parts of the accommodation</e1>, including sanitary facilities and kitchens, could be <e2>easily altered to meet the needs of a wheelchair user or, where required by a local planning authority, the dwelling is wheelchair accessible</e2>.",necessity,annotated
+5211dbd1-d12a-4371-ad62-1dc5616cd2f5,The heat pump along with its accompanying pipework should be flushed and purged as a separate system while isolated from the ground array system.,{'ID': '387_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>heat pump</e1> along with its accompanying pipework should be <e2>flushed and purged as a separate system</e2> while isolated from the ground array system.,necessity,annotated
+956efc87-87de-4d3c-99fb-dc58eab9353b,"A  dwelling  that  is  intended  for  sheltered  housing  or  supported  housing  of  a  person  with mobility or functional impairment shall have at least one toilet and washing facility which has a  free  space  with  a  diameter  of  at  least  1,500  millimetres.",{'ID': '42_Finnish_Accessibility'},"A <e1>dwelling</e1> that is <e2>intended for sheltered housing or supported housing of a person with mobility or functional impairment</e2> shall have at least one toilet and washing facility which has a free space with a diameter of at least 1,500 millimetres.",selection,annotated
+328fb8e7-cae4-4465-b7a7-24f0d066d65a,"The results of all pressure tests on buildings, including any test failures, should be reported to the building control body.",{'ID': '360_UK_DocM_V2_AccessAndUseOfBuildings'},"The <e1>results</e1> of all pressure tests on buildings, including any test failures, should be <e2>reported to the building control body</e2>.",necessity,annotated
+f3bd99b4-7ea5-4968-af10-3c133c0b5aa0_10,,,No individual flight has a <e1>category</e1> of more than <e2>0.2</e2>.,less-equal,synthetic
+86350df0-a40e-412b-a301-004524d56736,"For wet heating systems in new dwellings with a floor area of 150m2 or greater, a minimum of two independently controlled heating circuits should be provided.",{'ID': '246_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For wet heating systems in new <e1>dwellings</e1> with a floor area of 150m2 or greater, a minimum of <e2>two</e2> independently controlled heating circuits should be provided.",none,annotated
+ff3e8f86-1542-4f54-a776-cfdc8482bad7_4,,,The <e1>dwelling emission rate</e1> of an air conditioner working in cooling mode should be a minimum of <e2>0.3</e2>.,greater-equal,synthetic
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_8,,,"In buildings more than 9 metres and at most 28 metres in height, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than <e1>1,200 MJ/m2</e1> in <e2>thresholds</e2>, these must be accessible via the interior.",greater,synthetic
+d925c189-860a-4fcb-ae88-d1cf8cc14fb8_3,,,"The <e1>exposure coefficient</e1> of steps in covered or heated outdoor staircases must be no less than <e2>850 millimetres</e2>, and the riser may be no more than 160 millimetres.",greater-equal,synthetic
+f27c9fb4-dc28-494c-a277-a51360cdfdb8,A handrail and its ending must be shaped safely and must continue past the start and end points of the structure.,{'ID': '57_Finnish_SafetyOfUse'},A handrail and its <e1>ending</e1> must be shaped safely and must <e2>continue past the start and end points of the structure</e2>.,necessity,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",{'ID': '83_Finnish_SafetyOfUse'},"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and <e1>500 millimetres</e1> in <e2>width</e2>; however, the sum of these must be at least 1,500 millimetres.",greater-equal,annotated
+636bce88-fd3b-4e5a-9f6a-4aa0d3d1bfa4,"Where a new building contains more than one dwelling, a common access point for a gigabit-capable public electronic communications network is required as a part of the buildings gigabit-ready physical infrastructure.",{'ID': '6_UK_DocR_V1_InfrastructureForElectircalCommunications'},"Where a new building contains more than one dwelling, a <e1>common access point</e1> for a <e2>gigabit-capable public electronic communications network</e2> is required as a part of the buildings gigabit-ready physical infrastructure.",necessity,annotated
+0da52584-1b37-48b5-840f-3795ae695275_3,,,the minimum clear dimensions of the platform are: <e1>18 dm3/s</e1> <e2>intended time of use</e2> and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+4abb3268-3ba6-47e8-a8b7-4676dbaa9a16,"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide all means of escape routes with a minimum clear headroom of 2m, except in doorways.",{'ID': '28_UK_DocK_ProtectionFromFalling'},"For buildings other than dwellings and for <e1>common</e1> <e2>access areas</e2> in buildings that contain flats, Provide all means of escape routes with a minimum clear headroom of 2m, except in doorways.",selection,annotated
+eccd4f77-ef4a-41fd-a22a-620c84fdddd4,There is a minimum of 400mm of worktop to at least one side of the oven and fridge or fridge freezer where this is taller than the worktop height (or to one side of a pair of tall appliances where they are located together at the end of a run).,{'ID': '98_UK_DocM_V1_AccessAndUseOfBuildings'},There is a minimum of 400mm of worktop to at least one side of the <e1>oven</e1> and fridge or fridge freezer where this is taller than the worktop height (or to <e2>one side</e2> of a pair of tall appliances where they are located together at the end of a run).,none,annotated
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_9,,,"The wall ties should have a horizontal spacing of 900mm and a vertical spacing of 450mm, or alternatively should be spaced such that the <e1>level difference</e1> is not less than <e2>2.4 metres</e2>.",greater-equal,synthetic
+4d80c4d1-08ee-481a-9f9c-e9151ce1094d_6,,,"The <e1>water vapour resistance</e1> of windows, roof windows, rooflights and doors should not exceed <e2>two persons per square metre</e2> of the total floor area of the dwelling.",less-equal,synthetic
+10b2bf58-18df-46ee-a766-ed11eec6f42b,"Humus soil, organic substances decomposing or rotting from moisture or building waste must not be left under new buildings, in their crawl spaces and in their gravel backfills functioning as a drainage layer.",{'ID': '45_Finnish_Health-Humidity'},"Humus soil, organic substances decomposing or rotting from moisture or <e1>building</e1> <e2>waste</e2> must not be left under new buildings, in their crawl spaces and in their gravel backfills functioning as a drainage layer.",part-of,annotated
+2afa8bba-b5ad-4e12-bc27-4beea3fd09b2,The normal relationship between the dimensions of the rise and going is: twice the rise plus the going (2R G) equals between 550mm and 700mm.,{'ID': '19_UK_DocK_ProtectionFromFalling'},The normal relationship between the <e1>dimensions</e1> of the rise and going is: <e2>twice the rise plus the going (2R G)</e2> equals between 550mm and 700mm.,equal,annotated
+d3fc8c9b-c23a-4188-8723-369caa90453c,"The reference value for a building's total combined window area is 15 of the sum total of the floor  plate areas  of  the  buildings  storeys that  are  fully  or in  part  above  the  ground  but, however, at most 50 of the building's facade area.",{'ID': '124_Finnish_EnergyEfficiency'},"The <e1>reference value</e1> for a building's <e2>total combined window area</e2> is 15 of the sum total of the floor plate areas of the buildings storeys that are fully or in part above the ground but, however, at most 50 of the building's facade area.",part-of,annotated
+0262f6e5-21bc-4312-9388-8ac93b79416d,The minimum full load EER of the absorption chillers should be no worse than 0.7.,{'ID': '285_UK_DocM_V2_AccessAndUseOfBuildings'},The minimum full <e1>load EER</e1> of the absorption chillers should be no worse than <e2>0.7</e2>.,greater-equal,annotated
+f9f11981-2aad-4ef7-82fc-c89470ebe263,A driveway must not intersect a walkway leading to a play area.,{'ID': '88_Finnish_SafetyOfUse'},A <e1>driveway</e1> must <e2>not intersect a walkway leading to a play area</e2>.,necessity,annotated
+2ff58135-b89d-40d1-a145-51aad9e5a942_8,,,"The landing in front of the outside door shall be at least <e1>130 millimetres</e1> <e2>load</e2> and at least 1,500 millimetres long.",greater-equal,synthetic
+3724fd47-22f7-432c-81a2-1abcb95c7df2_7,,,"The total number of ventilators installed in a dwellings habitable rooms and kitchens should be no fewer than five, except in one bedroom <e1>battery storage</e1>, where there should be no fewer than <e2>100 litres</e2>.",greater-equal,synthetic
+ddd6ec57-ed54-4a8a-abaf-4b1efc287dde,The flushing shall be carried out with household water to remove any dirt and debris from the pipe network.,{'ID': '111_Finnish_Health-WaterAndSewerage'},The flushing shall be <e1>carried out with household water</e1> to <e2>remove any dirt and debris from the pipe network</e2>.,selection,annotated
+bf798097-bb99-42d0-a73f-8cebab8fbeb8_7,,,"In the entrance halls and other indoor areas of administrative, service and business premises and in assembly areas, the <e1>total load</e1> of the steps must be no more than <e2>9 metres</e2> and the tread must be no less than 300 millimetres.",less-equal,synthetic
+d504fd87-d13d-4936-9d7a-71d17954760d,The riser of the steps in an exit may be no more than 180 millimetres.,{'ID': '25_Finnish_SafetyOfUse'},The riser of the <e1>steps</e1> in an exit may be no more than <e2>180 millimetres</e2>.,none,annotated
+5aebe4f8-6ca6-4448-94db-5272b5541efb,"The results of all pressure tests on dwellings, including any test failures, should be reported to the building control body.",{'ID': '359_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The results of all pressure tests on <e1>dwellings</e1>, <e2>including any test failures</e2>, should be reported to the building control body.",none,annotated
+18797f16-0b56-41e9-a4e6-d4150db4165d,A new building must be built to a minimum standard of total energy performance.,{'ID': '47_UK_DocM_V2_AccessAndUseOfBuildings'},A new <e1>building</e1> must be <e2>built to a minimum standard of total energy performance</e2>.,necessity,annotated
+973c9430-2b4a-4ab4-82df-7060c3002f77_0,,,The <e1>ventilation provision</e1> for the community heating primary circuit should be a minimum of <e2>2.0 m3/(h m2)</e2>.,greater-equal,synthetic
+76bf63bd-30f4-440d-81a0-61ca16170f70_9,,,Control should be maximised and heat gain to uninsulated pipes should only be permitted where the <e1>Length</e1> is less than <e2>500kW</e2> of the total load.,less,synthetic
+d728a9c8-0302-4bd1-b69b-0daeefce30d1,"Where a service building has a reception or sales counter, there should be convenient access to it and part of it should be at a level suitable for a wheelchair user or a seated person.",{'ID': '84_UK_DocM_V2_AccessAndUseOfBuildings'},"Where a <e1>service building</e1> has a reception or sales counter, there should be convenient access to it and <e2>part</e2> of it should be at a level suitable for a wheelchair user or a seated person.",none,annotated
+339fc78c-a2f2-481c-a410-3aeb41e24b8a_8,,,Solid walls constructed of coursed brickwork or blockwork should be at least as <e1>axle group load</e1> as <e2>900 millimetres</e2> of the storey height.,greater-equal,synthetic
+9fee4426-8d7f-40f9-bc6f-562a5d3fd9b4,"For roofs insulated at ceiling level, the long-term protection of the insulation layer should be considered: boarded areas should be provided above the insulation to give access for maintenance.",{'ID': '144_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For roofs insulated at ceiling level, the long-term protection of the insulation layer should be considered: boarded <e1>areas</e1> should be <e2>provided above the insulation</e2> to give access for maintenance.",necessity,annotated
+710ef992-e187-4b1a-894b-e0e222f54359,"NOTE: For grid-supplied electricity, a CO2 emission factor of 0.136kgCO2/kWh and primary energy factor of 1.501kWhPE/kWh should be used.",{'ID': '199_UK_DocM_V2_AccessAndUseOfBuildings'},"NOTE: For grid-supplied electricity, a CO2 emission factor of 0.136kgCO2/kWh and <e1>primary energy factor</e1> of <e2>1.501kWhPE/kWh</e2> should be used.",equal,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479_5,,,Individual flights are: for <e1>total useful floor area</e1> up to <e2>0.35W/(m2K)</e2> not more than 10m long; for gradients up to 1:12 not more than 5m long.,less-equal,synthetic
+0f32fab3-c03b-400c-949a-cc95828a89d3,The specification of comfort cooling systems should be based on a heat gain calculation for the dwelling.,{'ID': '330_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>specification</e1> of comfort cooling systems should be <e2>based on a heat gain calculation for the dwelling</e2>.,necessity,annotated
+9b2e2a40-6d63-4ee6-a539-da1d15dd68bd,"Where relevant work is undertaken on a mixed-use building, it should be determined which parking spaces are associated parking spaces for the use of occupants of the dwellings, and which parking spaces are for use by users of the non-residential function of the building.",{'ID': '94_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where relevant <e1>work</e1> is <e2>undertaken on a mixed-use building</e2>, it should be determined which parking spaces are associated parking spaces for the use of occupants of the dwellings, and which parking spaces are for use by users of the non-residential function of the building.",selection,annotated
+53e31e26-a39b-4047-a86e-bdb8021413e8,Window handles on windows that open outwards are not more than 650mm from the inside face of the wall when the window is at its maximum openable angle.,{'ID': '84_UK_DocO_Overheating'},Window handles on windows that open outwards are not more than <e1>650mm</e1> <e2>from the inside face of the wall</e2> when the window is at its maximum openable angle.,less-equal,annotated
+bb3ac5b0-14d0-4d75-95d9-713adc6f2f58,"Any walls, doors and windows should be insulated and draught-proofed to at least the same extent as in the existing dwelling.",{'ID': '433_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Any walls, <e1>doors</e1> and <e2>windows</e2> should be insulated and draught-proofed to at least the same extent as in the existing dwelling.",none,annotated
+9fee4426-8d7f-40f9-bc6f-562a5d3fd9b4,"For roofs insulated at ceiling level, the long-term protection of the insulation layer should be considered: boarded areas should be provided above the insulation to give access for maintenance.",{'ID': '144_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For roofs insulated at ceiling level, the <e1>long-term</e1> <e2>protection</e2> of the insulation layer should be considered: boarded areas should be provided above the insulation to give access for maintenance.",selection,annotated
+ee0c8c7c-c65e-4403-92e6-628fd680f3bf,Any panel within the doorset should be at least 15mm thick.,{'ID': '30_UK_DocQ_Security_Dwellings'},Any panel within the <e1>doorset</e1> should be at least <e2>15mm</e2> thick.,none,annotated
+f420ae57-5656-4558-b1a3-1079e46bf6cc_11,,,"In the case of the storey-level door of a dwelling, or if the <e1>differences</e1> through the door exceeds <e2>200 millimetres</e2>, doors must open in the direction of the exit.",greater,synthetic
+"8feaf7f2-dfd8-43ae-ab8d-791ee1ffd86c	However, if the elevation difference is no more than 1,000 millimetres, the ramp may not have a gradient of more than eight per cent.	{'ID': '9_Finnish_Accessibility'}_1",,,"However, if the <e1>number of storeys</e1> is no more than <e2>0.3W/m2</e2>, the ramp may not have a gradient of more than eight per cent.",less-equal,synthetic
+7d1ada0b-8dcc-4c01-84d7-78b80cb404c9,"If there are not enough associated parking spaces outside of the covered car park to meet the requirement to install electric vehicle charge points, then cable routes should be installed for associated parking spaces within the covered car park.",{'ID': '58_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If there are not enough <e1>associated</e1> parking spaces outside of the covered car park to meet the requirement to install electric vehicle charge points, then cable routes should be installed for associated parking spaces within the <e2>covered</e2> car park.",none,annotated
+984c252b-74f4-4d85-9080-1c8ae1851eca,"If performance requires thicker glass to be used, an equivalent window unit with standard thickness (6mm) glazing should be shown to meet the required standard.",{'ID': '113_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If performance requires thicker glass to be used, an equivalent window unit with <e1>standard thickness</e1> (6mm) <e2>glazing</e2> should be shown to meet the required standard.",part-of,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_0,,,"The free opening of the vertical hatch or window of an emergency exit must be at least <e1>B</e1> in <e2>shallow projecting</e2> and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",greater-equal,synthetic
+bc49524e-4bac-4d16-bc83-5a977019cfaa,Other ventilation systems may be acceptable if they can be shown to meet an equal level of performance.,{'ID': '30_UK_DocF_V1_Ventilation'},Other ventilation systems may be <e1>acceptable</e1> if they can be <e2>shown to meet an equal level of performance</e2>.,none,annotated
+"8feaf7f2-dfd8-43ae-ab8d-791ee1ffd86c	However, if the elevation difference is no more than 1,000 millimetres, the ramp may not have a gradient of more than eight per cent.	{'ID': '9_Finnish_Accessibility'}_6",,,"However, if the <e1>fire igniting</e1> is no more than <e2>0.7W/(m2K)</e2>, the ramp may not have a gradient of more than eight per cent.",less-equal,synthetic
+7e34700e-92de-4b00-a820-f4085a2e186c,"If the free gap between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than 2 metres, the wall in question must be class EI 15.",{'ID': '135_Finnish_FireSafety'},"If the free gap between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than 2 metres, the <e1>wall</e1> in question must be <e2>class</e2> EI 15.",part-of,annotated
+2a8898d7-8561-4f67-9979-1bbba8ad42e6,"If insulating material is inserted into a cavity in a cavity wall, reasonable precautions shall be taken to prevent the subsequent permeation of any toxic fumes from that material into any part of the building occupied by people.",{'ID': '3_UK_DocD_ToxicSubstances'},"If <e1>insulating material</e1> is inserted into a cavity in a cavity wall, reasonable precautions shall be taken to <e2>prevent the subsequent permeation of any toxic fumes from that material into any part of the building occupied by people</e2>.",necessity,annotated
+9415ae4b-7a74-4c70-a245-e4381c6d71bf_0,,,"At gables and party walls, insulation should extend to the wall; if the <e1>kitchens</e1> between the wall and joist is less than <e2>40 degrees Celsius</e2>, perimeter insulation may be required.",less,synthetic
+2fad9e0f-fa0d-4a6b-9c63-152ef8828c4d_1,,,An upstand built on site should not exceed a <e1>domestic  hot  water cylinder heat loss</e1> of <e2>15mm</e2>.,less-equal,synthetic
+bde1697a-20c9-4f15-a63c-5be323a058c1,Any connection of two or more air handling units to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,{'ID': '90_Finnish_Health-IndoorClimateAndVentilation'},Any connection of two or more air handling units to the same duct or <e1>chamber</e1> shall be designed so that the <e2>pressures</e2> of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,none,annotated
+baee716c-b8c2-4500-b4de-63fa11f007b1,A minimum of one in five of the remaining parking spaces must have access to cable routes.,{'ID': '83_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},A minimum of one in <e1>five</e1> of the remaining <e2>parking spaces</e2> must have access to cable routes.,equal,annotated
+7d35f4c4-fa65-4d68-a974-f54386ca8aee_3,,,"However, a horizontal <e1>Roofs</e1> in a protective part must be no higher than <e2>3</e2>.",less-equal,synthetic
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_0,,,Skirtings totalling up to 50mm total thickness and shallow projecting <e1>rain-water</e1> or casings above <e2>400 millimetres</e2> may be discounted when measuring clear width.,greater,synthetic
+0da52584-1b37-48b5-840f-3795ae695275,the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,{'ID': '119_UK_DocM_V2_AccessAndUseOfBuildings'},the <e1>minimum</e1> clear <e2>dimensions</e2> of the platform are: 1100mm wide and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,selection,annotated
+c0a6d35c-cc20-428b-941d-c3e3e6365c74_8,,,"In a tier that is uninterrupted by cross-gangways, and where the <e1>projection</e1> exceeds <e2>1000m2</e2>, use a maximum number of steps of 40.",greater,synthetic
+21bf2954-bfa8-44ef-bb2e-4e34367965ba,"If a load-bearing element is required to have a longer fire resistance time with respect to integrity E and insulation I than with respect to load-bearing capacity R, the longer fire resistance time shall also be applied to the load-bearing capacity.",{'ID': '88_Finnish_FireSafety'},"If a load-bearing element is <e1>required to have a longer fire resistance time with respect to integrity E and insulation I than with respect to load-bearing capacity R</e1>, the <e2>longer</e2> fire resistance time shall also be applied to the load-bearing capacity.",none,annotated
+a8b3e54e-902c-4502-99a2-8c41d46f1416,"If there are more than 60 chairs in a space, they must be linked to one another in at least four groups, unless the chairs are placed around tables.",{'ID': '106_Finnish_SafetyOfUse'},"If there are more than 60 chairs in a space, they must be linked to one another in at least four groups, unless the <e1>chairs</e1> are <e2>placed around tables</e2>.",selection,annotated
+d342429e-d3fc-46e0-a195-527cfef1fd4b_3,,,"When an existing building with a total useful <e1>heat loss</e1> of over <e2>400mm</e2> is being extended or the habitable area is being increased, consequential improvements should be installed.",greater,synthetic
+7134933d-17df-4a8c-b72e-1c09177bad1c,The spread of fire in voids of wall-type building elements must be restricted at least by storey.,{'ID': '130_Finnish_FireSafety'},The spread of fire in <e1>voids</e1> of wall-type <e2>building elements</e2> must be restricted at least by storey.,part-of,annotated
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c_11,,,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be <e1>design solar load</e1> <e2>four</e2>.",equal,synthetic
+"8feaf7f2-dfd8-43ae-ab8d-791ee1ffd86c	However, if the elevation difference is no more than 1,000 millimetres, the ramp may not have a gradient of more than eight per cent.	{'ID': '9_Finnish_Accessibility'}_9",,,"However, if the <e1>access</e1> is no more than <e2>five</e2>, the ramp may not have a gradient of more than eight per cent.",less-equal,synthetic
+7602a501-a5b5-429c-99e1-8bc801243494,"The flooring and wall covering must provide waterproofing, or separate waterproofing must be installed under the flooring and behind the wall covering.",{'ID': '111_Finnish_Health-Humidity'},"The flooring and wall covering must provide waterproofing, or separate <e1>waterproofing</e1> must be <e2>installed under the flooring and behind the wall covering</e2>.",selection,annotated
+c490feb8-f09b-4c86-8d5f-12e1a5aec6db,Ventilation intakes should be located away from the direct impact of the sources of local pollution.,{'ID': '124_UK_DocF_V1_Ventilation'},<e1>Ventilation intakes</e1> should be <e2>located away from the direct impact of the sources of local pollution</e2>.,necessity,annotated
+2695c899-0ada-478c-9b2d-796f79ea4c52,"Glazing, with which people are likely to come into contact whilst moving in or about the building shall: (a) if broken on impact, break in a way which is unlikely to cause injury; or (b) resist impact without breaking; or (c) be shielded or protected from impact.",{'ID': '92_UK_DocK_ProtectionFromFalling'},"<e1>Glazing</e1>, with which people are likely to come into contact whilst moving in or about the building shall: (a) if broken on impact, break in a way which is unlikely to cause injury; or (b) resist impact without breaking; or (c) <e2>be shielded or protected from impact</e2>.",necessity,annotated
+83344b26-7cf0-452a-9dac-c0288c46393d,"The non-primary doors for entering a dwelling (for example, back door or garage inter-connecting doors) should be fitted with a multipoint locking system that meets the requirements of: PAS 3621 (key locking on both sides), or PAS 8621 (non-key locking on the internal face), or PAS 10621 (non-key locking on the internal face, but with an external locking override facility).",{'ID': '37_UK_DocQ_Security_Dwellings'},"The non-primary <e1>doors</e1> for entering a dwelling (for example, back door or garage inter-connecting doors) should be fitted with a <e2>multipoint locking system</e2> that meets the requirements of: PAS 3621 (key locking on both sides), or PAS 8621 (non-key locking on the internal face), or PAS 10621 (non-key locking on the internal face, but with an external locking override facility).",necessity,annotated
+328fb8e7-cae4-4465-b7a7-24f0d066d65a,"The results of all pressure tests on buildings, including any test failures, should be reported to the building control body.",{'ID': '360_UK_DocM_V2_AccessAndUseOfBuildings'},"The results of all <e1>pressure tests</e1> on buildings, <e2>including any test failures</e2>, should be reported to the building control body.",selection,annotated
+339fc78c-a2f2-481c-a410-3aeb41e24b8a_7,,,Solid walls constructed of coursed brickwork or blockwork should be at least as <e1>service</e1> as <e2>40</e2> of the storey height.,greater-equal,synthetic
+dcc583b1-8c4c-42cf-a1ed-e8907de56254_4,,,"The <e1>edges</e1> of the indoor steps of other spaces intended for everyday use may be no more than <e2>600mm</e2>, and the tread must be no less than 270 millimetres.",less-equal,synthetic
+75c60084-6878-472d-8694-e8739e0dd76c_3,,,The <e1>control capabilities</e1> of access routes in assembly areas with a maximum capacity of 60 persons must be at least <e2>70 kN</e2>.,greater-equal,synthetic
+9027959e-efc1-4d32-acbe-e0775d40f001,"The morticed bolts should have a minimum projection of 20mm, should be at least 100mm from the top and bottom corners of the door, and should avoid any door construction joints.",{'ID': '38_UK_DocQ_Security_Dwellings'},"The <e1>morticed bolts</e1> should have a minimum <e2>projection</e2> of 20mm, should be at least 100mm from the top and bottom corners of the door, and should avoid any door construction joints.",part-of,annotated
+c952db0f-b605-4335-8d56-97fc339ad5ba_4,,,All <e1>1400mm</e1> <e2>water pump</e2> of the installation and commissioning checklist should be completed.,equal,synthetic
+75c60084-6878-472d-8694-e8739e0dd76c,The width of access routes in assembly areas with a maximum capacity of 60 persons must be at least 900 millimetres.,{'ID': '115_Finnish_SafetyOfUse'},The <e1>width</e1> of <e2>access routes</e2> in assembly areas with a maximum capacity of 60 persons must be at least 900 millimetres.,part-of,annotated
+4d80c4d1-08ee-481a-9f9c-e9151ce1094d,"The area of windows, roof windows, rooflights and doors should not exceed 25 of the total floor area of the dwelling.",{'ID': '421_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The <e1>area</e1> of <e2>windows</e2>, roof windows, rooflights and doors should not exceed 25 of the total floor area of the dwelling.",part-of,annotated
+d8066a73-49c2-4e99-825a-b49b9b2ba67d_10,,,A landing measuring at least <e1>300mm</e1> in <e2>Extract</e2> must be reserved in front of and behind a door located in an exit route.,greater-equal,synthetic
+d48274a1-bd70-4db9-8490-14075029cbb7,All users including wheelchair users should be able to reach and use the controls that summon and direct the lifting device.,{'ID': '109_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>All</e1> <e2>users</e2> including wheelchair users should be able to reach and use the controls that summon and direct the lifting device.,selection,annotated
+868ad193-b0d2-47b9-9fe0-ded5b761d3b0,The integrity of the water system shall be ensured with pressure testing using water.,{'ID': '106_Finnish_Health-WaterAndSewerage'},The <e1>integrity</e1> of the <e2>water system</e2> shall be ensured with pressure testing using water.,part-of,annotated
+4f2b56cb-9852-4406-bbea-31f426fb4910,"replacing a heating system including the heating appliance, pipework and heat emitters), the energy performance of the whole system should be assessed, and the results documented and handed over to the building owner with the manufacturers supporting literature.",{'ID': '397_UK_DocM_V2_AccessAndUseOfBuildings'},"replacing a heating system including the heating appliance, pipework and heat emitters), the <e1>energy performance</e1> of the whole system should be <e2>assessed, and the results documented and handed over to the building owner with the manufacturers supporting literature</e2>.",necessity,annotated
+b47066e6-d145-4427-91c0-8763c5ea92c5,Remedial work should be carried out to achieve satisfactory performance in retests.,{'ID': '387_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Remedial work</e1> should be <e2>carried out</e2> to achieve satisfactory performance in retests.,necessity,annotated
+2cc3d5b0-d3b4-45f2-a00d-838fd3f9abbb_0,,,"There should be a <e1>buried part</e1>, in the absence of tobacco smoke or other excessive pollutants, of <e2>proportion</e2>.",equal,synthetic
+cf35d4a4-3170-421b-9be1-b68d928eed1d_4,,,"A roof with a <e1>temperature</e1> greater than <e2>10m</e2> must be constructed making appropriate use of walkways, roof ladders, safety ladders, roof stairs, roof treads and foot rails.",greater,synthetic
+e43c1e88-be80-42d9-944e-1bf0f0f82479_11,,,Individual flights are: for gradients up to 1:15 not more than 10m long; for gradients up to 1:12 not more than <e1>0.05</e1> <e2>output</e2>.,less-equal,synthetic
+dcc583b1-8c4c-42cf-a1ed-e8907de56254_8,,,"The <e1>gradient</e1> of the indoor steps of other spaces intended for everyday use may be no more than <e2>100 litres</e2>, and the tread must be no less than 270 millimetres.",less-equal,synthetic
+5fa7daca-cb50-4397-a736-617e52d30187_4,,,"If <e1>ventilation rate</e1> at below 30% are required and unavailable, the <e2>number of appliances</e2> may be taken as equal to that at 30% load.",equal,synthetic
+d988e207-c3f9-4314-9a16-f99b334595f4_9,,,The <e1>atmosphere</e1> must be no less than <e2>EI 30</e2>.,greater-equal,synthetic
+6bf41e87-d7c1-42a5-bf0d-67c711a21753,"Additionally, a sign identifying the floor reached should be provided on each landing in a location that can be easily seen from the lifting device and is designed so that it contrasts visually with its surrounding.",{'ID': '105_UK_DocM_V2_AccessAndUseOfBuildings'},"Additionally, a sign identifying the floor reached should be provided on each landing in a location that can be easily seen from the lifting device and is <e1>designed</e1> so that <e2>it contrasts visually with its surrounding</e2>.",selection,annotated
+793cb939-b3d9-46eb-ae65-71a4d5c8031b_8,,,Where the parking is within the private curtilage of the dwelling (but not within a carport or garage) at least one space is a standard parking bay that can be <e1>net heating energy demand</e1> to <e2>60</e2>.,less-equal,synthetic
+d342429e-d3fc-46e0-a195-527cfef1fd4b_0,,,"When an existing building with a total useful <e1>air flow rates</e1> of over <e2>50mm</e2> is being extended or the habitable area is being increased, consequential improvements should be installed.",greater,synthetic
+0096a3bf-ac16-4a75-adf9-8c3f4a9b8610_7,,,The smaller <e1>net heating energy demand</e1> of each panel which can be either the width or height of the panel should be <e2>180kW</e2> or less.,less-equal,synthetic
+a1f91cfd-21f8-49a4-8468-746f49f4848e,"For a building that contains more than one dwelling for example a block of flats or a terrace of houses an average target primary energy rate, target emission rate and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",{'ID': '50_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For a building that contains more than one dwelling for example a block of flats or a terrace of houses an average target primary energy rate, target emission rate and <e1>target fabric energy efficiency rate</e1> may be <e2>calculated as an alternative to individual target rates for each dwelling</e2>.",necessity,annotated
+b0e99ac5-9cbc-4beb-b8ff-85383ae70ea8,"The approach route should be safe and convenient, adopt the shallowest gradient that can reasonably be achieved and be step-free, irrespective of the storey on which the dwelling is located.",{'ID': '40_UK_DocM_V1_AccessAndUseOfBuildings'},"The <e1>approach route</e1> should be <e2>safe</e2> and convenient, adopt the shallowest gradient that can reasonably be achieved and be step-free, irrespective of the storey on which the dwelling is located.",necessity,annotated
+9ff8b8fd-5361-4c3d-9a7e-7459276c8df7,The dwelling fabric energy efficiency rate must not exceed the individual dwellings target fabric energy efficiency rate.,{'ID': '66_UK_DocL_V1_ConsrvationOfFuelAndPower'},The dwelling fabric energy efficiency rate must not exceed the <e1>individual</e1> <e2>dwellings</e2> target fabric energy efficiency rate.,selection,annotated
+26980508-105c-49db-8595-bf001a48d757_2,,,"In <e1>cold premises</e1> with no fixed <e2>gigabit-capable public electronic communications network</e2> or furnishings, the number of persons shall be calculated to be two persons per square metre.",not-part-of,synthetic
+2f0f22aa-06d3-478d-a777-5aca5c2fb5c1,"For sliding doors and gates, provide both of the following: (i) a stop or other effective means to prevent them coming off the end of the track; (ii) a retaining rail to prevent doors and gates falling if the suspension system fails or the rollers leave the track.",{'ID': '120_UK_DocK_ProtectionFromFalling'},"For sliding doors and gates, provide both of the following: (i) a <e1>stop</e1> or other effective means <e2>to prevent them coming off the end of the track</e2>; (ii) a retaining rail to prevent doors and gates falling if the suspension system fails or the rollers leave the track.",selection,annotated
+12e545d1-64f4-45c9-a520-5b8a003eba0a,"If the dwelling has more than one exposed facade, the area of background ventilators on each facade should be similar, to allow cross-ventilation.",{'ID': '85_UK_DocF_V1_Ventilation'},"If the dwelling has more than <e1>one</e1> exposed facade, the area of <e2>background ventilators</e2> on each facade should be similar, to allow cross-ventilation.",none,annotated
+5fa7daca-cb50-4397-a736-617e52d30187_3,,,"If <e1>vertical spacing</e1> at below 30% are required and unavailable, the <e2>dimensions</e2> may be taken as equal to that at 30% load.",equal,synthetic
+53e31e26-a39b-4047-a86e-bdb8021413e8_1,,,Window handles on windows that open outwards are not more than <e1>270 millimetres</e1> <e2>access</e2> when the window is at its maximum openable angle.,less-equal,synthetic
+7f72632a-dc0a-4318-afd7-7090b42350fc,Mechanical supply terminals should be located and directed to avoid draughts.,{'ID': '106_UK_DocF_V1_Ventilation'},Mechanical <e1>supply terminals</e1> should be located and <e2>directed</e2> to avoid draughts.,necessity,annotated
+eccd4f77-ef4a-41fd-a22a-620c84fdddd4_3,,,There is a minimum of <e1>1000m2</e1> of worktop to at least <e2>number of people evacuating</e2> of the oven and fridge or fridge freezer where this is taller than the worktop height (or to one side of a pair of tall appliances where they are located together at the end of a run).,greater-equal,synthetic
+8aa4b706-1659-4e30-a4fe-e7f33efe3241,All three parts of the compliance checklist should be completed.,{'ID': '108_UK_DocO_Overheating'},All three <e1>parts</e1> of the compliance checklist should be <e2>completed</e2>.,necessity,annotated
+745d890e-3b3c-4972-8b75-dfdfd81e764a,"Handrails should be set at heights that are convenient for all users of the building and should extend safely beyond the top and bottom of a flight of steps, or a ramp, to give both stability and warning of the presence of a change in level.",{'ID': '58_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Handrails</e1> should be <e2>set at heights that are convenient for all users of the building</e2> and should extend safely beyond the top and bottom of a flight of steps, or a ramp, to give both stability and warning of the presence of a change in level.",necessity,annotated
+34a524ec-6994-426f-86af-78788fd34a80,"Between the locking points for the mortice lock and surface-mounted rim lock, the distance should be 400-600mm.",{'ID': '36_UK_DocQ_Security_Dwellings'},"<e1>Between the locking points</e1> for the mortice lock and surface-mounted rim lock, the <e2>distance</e2> should be 400-600mm.",selection,annotated
+fa8a6d84-eb99-490e-8169-3c65353fb553_0,,,"For large roofs, where the smaller horizontal dimension of the roof is 50 m or more, and the topography is windswept, the value of the <e1>water temperature</e1> shall be at least <e2>01:20:00</e2>.",greater-equal,synthetic
+a86b58e8-046f-44b7-8e1b-00c876c8c647_5,,,"Parapets in <e1>open outwards</e1> A to <e2>E 15</e2> and panel parts of walls acting as parapets, as well as their fasteners, shall be designed to the concentrated load Qk = 0.3 kN acting on a random spot.",less-equal,synthetic
+5fa7daca-cb50-4397-a736-617e52d30187_8,,,"If efficiencies at below 30% are required and unavailable, the <e1>control function</e1> may be taken as equal to that at <e2>400 millimetres</e2>.",equal,synthetic
+c2e0629d-350b-45b8-9e9e-d58be1780f12,"If the basement has no bedrooms, it should be treated as having one bedroom when calculating the ventilation required for the purposes of meeting the ventilation standards.",{'ID': '73_UK_DocF_V1_Ventilation'},"If the <e1>basement</e1> has no <e2>bedrooms</e2>, it should be treated as having one bedroom when calculating the ventilation required for the purposes of meeting the ventilation standards.",not-part-of,annotated
+20609d43-016e-4314-9620-256f73f1c6ed,"The general ventilation rate for a new conservatory and, if necessary, adjoining rooms could be achieved using background ventilators.",{'ID': '160_UK_DocF_V1_Ventilation'},"The <e1>general</e1> <e2>ventilation rate</e2> for a new conservatory and, if necessary, adjoining rooms could be achieved using background ventilators.",selection,annotated
+ebc429f0-cb90-41ab-9a11-401a2ddc7bad,"For continuous mechanical ventilation systems, such as continuous mechanical extract ventilation or mechanical ventilation with heat recovery, the system should be balanced to achieve design air flow rates at each room terminal.",{'ID': '268_UK_DocF_V1_Ventilation'},"For continuous mechanical ventilation systems, such as continuous mechanical extract ventilation or mechanical <e1>ventilation</e1> with <e2>heat recovery</e2>, the system should be balanced to achieve design air flow rates at each room terminal.",part-of,annotated
+0071a7ee-a50c-44ab-a562-d99bf06d7918,The text should be displayed over three lines.,{'ID': '118_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},The <e1>text</e1> should be <e2>displayed over three lines</e2>.,necessity,annotated
+2f8d4247-e53b-49ae-bd26-c4f1765eaee8_3,,,"Extract air of <e1>type and quality</e1> <e2>two persons per square metre</e2>, 3 and 4 shall not be used as recirculation air.",equal,synthetic
+05864826-21ef-4ae7-9af8-2aaeffc7267a_7,,,Modular and portable buildings with a planned <e1>energy consumption</e1> of more than <e2>200 millimetres</e2> but with an intended time of use in a single location of less than two years should be shown to comply with the energy efficiency requirements.,greater,synthetic
+c236bc17-ef9a-4694-a34e-68a9f38ae405,"For a heat exchanger between a solar primary and secondary system, a minimum of 0.1m2 or equivalent of heat exchanger area should be provided for every 1m2 of the net absorber area of the solar collector.",{'ID': '323_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For a <e1>heat exchanger</e1> <e2>between a solar primary and secondary system</e2>, a minimum of 0.1m2 or equivalent of heat exchanger area should be provided for every 1m2 of the net absorber area of the solar collector.",selection,annotated
+8cef7dc5-2d76-4dd8-80c5-6861b11a8f6f,"Where the work concerns a building containing more than one dwelling, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",{'ID': '3_UK_DocR_V1_InfrastructureForElectircalCommunications'},"Where the work concerns a building containing more than <e1>one</e1> <e2>dwelling</e2>, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",greater,annotated
+38020928-c137-486e-88d7-c8feec038c99,A building must be provided with a fire wall if it is situated adjacent to a neighbouring building or so close to a neighbouring building that the spread of fire is evident.,{'ID': '189_Finnish_FireSafety'},A building must be provided with a <e1>fire wall</e1> if it is <e2>situated adjacent to a neighbouring building</e2> or so close to a neighbouring building that the spread of fire is evident.,none,annotated
+164122ed-c7ac-4cf8-8a54-3d56c144f78d_5,,,"In general, the findings indicate that there should be at least the same number of <e1>Drawings</e1> as <e2>open-plan space</e2> and for some building types, e.g. large retail buildings, at least twice as many.",greater-equal,synthetic
+0cafda73-ee3a-4a99-a224-2d142de63618,"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",{'ID': '238_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all <e1>parts</e1> of the system including pipework and emitters should be <e2>sized</e2> to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",necessity,annotated
+c952db0f-b605-4335-8d56-97fc339ad5ba,All three parts of the installation and commissioning checklist should be completed.,{'ID': '262_UK_DocF_V1_Ventilation'},All three <e1>parts</e1> of the installation and commissioning checklist should be <e2>completed</e2>.,necessity,annotated
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",{'ID': '75_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the <e1>total cost</e1> of the major <e2>renovation</e2>.",part-of,annotated
+46f5be2a-1514-420b-bc39-331fc6e0d2df,"The dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the target primary energy rate, target emission rate and target fabric energy efficiency rate, respectively.",{'ID': '356_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The dwelling primary energy rate, dwelling emission rate and <e1>dwelling fabric energy efficiency rate</e1>, all calculated using the measured air permeability, must not be higher than the target primary energy rate, target emission rate and <e2>target fabric energy efficiency rate</e2>, respectively.",less-equal,annotated
+64695439-3458-4d43-8e7b-a2ba75075cea,"There must be safe and easily accessible, uninterrupted access routes to any chimneys, ventilation equipment and other building equipment and structural elements that are located on the roof of the building and that must be accessed regularly.",{'ID': '124_Finnish_SafetyOfUse'},"There must be safe and easily accessible, uninterrupted <e1>access routes</e1> to any chimneys, ventilation equipment and other building <e2>equipment</e2> and structural elements that are located on the roof of the building and that must be accessed regularly.",necessity,annotated
+e874f337-2067-4e77-ad32-c3b857f40e7a_10,,,"If the <e1>structure</e1> exceeds <e2>ten millimetres</e2>, the total minimum width of the exits shall be calculated by increasing the original 1,200 millimetres by 400 millimetres for each additional group of 60 people.",greater,synthetic
+37f01a2c-b944-45a2-a7f4-140d8c03d7ac_2,,,"After rebating, frame components should retain at least <e1>100mm</e1> of <e2>CO2 measurements</e2>.",greater-equal,synthetic
+6c789809-b1b8-429a-8fe2-8ce16f8a4b54_8,,,Air flows in the continuous working area of a parking garage for motor vehicles shall be designed so that the <e1>vicinity</e1> does not exceed <e2>55 degrees Celsius</e2>.,less-equal,synthetic
+973c9430-2b4a-4ab4-82df-7060c3002f77_8,,,The <e1>Air flow rates</e1> for the community heating primary circuit should be a minimum of <e2>0.2</e2>.,greater-equal,synthetic
+511c1a7f-08b9-48ec-aea6-9b749fdf31a1_10,,,"A non-residential building shall, considering the intended use and functional units of the building and distances in the building, have an <e1>1m3/s</e1> of appropriately located <e2>fixture</e2> which are suitable for users of wheelchairs and walking frames with wheels.",equal,synthetic
+72785bd7-d935-4c81-ab5f-ba2095ba62a9,"Manual controls, where provided, should be within reasonable reach of the occupants.",{'ID': '20_UK_DocL_V1_ConsrvationOfFuelAndPower'},"<e1>Manual</e1> <e2>controls</e2>, where provided, should be within reasonable reach of the occupants.",selection,annotated
+4e4fdf56-c45b-4d89-b18f-7a2f24a41ba9_0,,,"In spaces intended for more than 60 persons, the <e1>open outwards</e1> of the access route must be at least <e2>20 degrees Celsius</e2>.",greater-equal,synthetic
+6a41a473-bd3c-4e38-a093-094b3fdae388_2,,,At least one in every <e1>13l/s</e1> remaining <e2>air barrier</e2> must be provided with cable routes.,equal,synthetic
+5869233a-4fc0-48bf-9007-2b0c9a169fef,"A building shall, if its size, number of storeys or an intended purpose of a premises within the building so requires, be divided into fire compartments in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",{'ID': '100_Finnish_FireSafety'},"A building shall, if its <e1>size</e1>, number of storeys or an intended purpose of a premises within the building so <e2>requires</e2>, be divided into fire compartments in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",selection,annotated
+77f993c6-dff1-4f9a-8f66-73221d3cbaff_2,,,"If the dwelling only has one habitable room, a minimum <e1>step</e1> of <e2>23C</e2> should be used.",greater-equal,synthetic
+05fdde92-d8af-42ad-963b-9019c69a8ab3_1,,,"For a timber frame where the intermediate floor structure breaches the external wall insulation, further insulation of the same <e1>power requirements</e1> as the <e2>hatches</e2> used in the external wall should be included within the depth of the intermediate floor structure.",equal,synthetic
+1d18f0c9-31e5-43ee-8f16-e4fa607c5cd9,"The same approved calculation tool must be used to calculate the target primary energy rate, the target emission rate, the building primary energy rate and the building emission rate.",{'ID': '51_UK_DocM_V2_AccessAndUseOfBuildings'},"The same approved calculation tool must be <e1>used to calculate</e1> the <e2>target primary energy rate</e2>, the target emission rate, the building primary energy rate and the building emission rate.",selection,annotated
+8e9ef8dc-18bd-4877-98cd-556aa4adee8f,"Reasonable provision shall be made for the conservation of fuel and power in buildings by: (a) limiting heat gains and losses (i) through thermal elements and other parts of the building fabric; and (ii) from pipes, ducts and vessels used for space heating, space cooling and hot water services; (b) providing fixed building services which (i) are energy efficient to a reasonable standard; (ii) have effective controls; and (iii) are commissioned by testing and adjusting as necessary to ensure they use no more fuel and power than is reasonable in the circumstances.",{'ID': '431_UK_DocM_V2_AccessAndUseOfBuildings'},"Reasonable provision shall be made for the conservation of fuel and power in buildings by: (a) limiting heat gains and losses (i) through thermal elements and other parts of the building fabric; and (ii) from pipes, ducts and vessels used for space heating, space cooling and hot water services; (b) <e1>providing fixed building services</e1> which (i) are energy efficient to a reasonable standard; (ii) have effective controls; and (iii) are <e2>commissioned by testing and adjusting as necessary to ensure they use no more fuel and power than is reasonable in the circumstances</e2>.",selection,annotated
+fa8a6d84-eb99-490e-8169-3c65353fb553,"For large roofs, where the smaller horizontal dimension of the roof is 50 m or more, and the topography is windswept, the value of the exposure coefficient shall be at least 1.",{'ID': '61_Finnish_StabilityOfStructures'},"For <e1>large</e1> <e2>roofs</e2>, where the smaller horizontal dimension of the roof is 50 m or more, and the topography is windswept, the value of the exposure coefficient shall be at least 1.",selection,annotated
+23cff3c3-1251-4c5f-9fd9-8f52d25eb494_2,,,Gasfired boilers and multi-stage oilfired boilers with an <e1>that</e1> of more than <e2>0.5 kN/m2</e2> should have fully modulating burner controls.,greater,synthetic
+66b3628a-f0ee-4bc7-93c8-2ae0145a2e78_11,,,"In a <e1>thermal energy streams</e1> with no openable <e2>European Standards</e2>, an intermittent extract fan should be provided with controls which continue to operate the fan for at least 15 minutes after the room is vacated.",not-part-of,synthetic
+2ff58135-b89d-40d1-a145-51aad9e5a942,"The landing in front of the outside door shall be at least 1,500 millimetres wide and at least 1,500 millimetres long.",{'ID': '16_Finnish_Accessibility'},"The landing in front of the outside door shall be at least <e1>1,500 millimetres</e1> <e2>wide</e2> and at least 1,500 millimetres long.",greater-equal,annotated
+26980508-105c-49db-8595-bf001a48d757_7,,,"In <e1>heating circuits</e1> with no fixed <e2>open-plan space</e2> or furnishings, the number of persons shall be calculated to be two persons per square metre.",not-part-of,synthetic
+4e8c5c50-44af-48f6-b959-e6f9b31afa1e_7,,,"If the planned time of use of a modular or portable building in a single location is less than two years, the only practical <e1>frame components</e1> may be <e2>CO2 readings</e2>.",equal,synthetic
+23cff3c3-1251-4c5f-9fd9-8f52d25eb494_7,,,Gasfired boilers and multi-stage oilfired boilers with an <e1>protective part</e1> of more than <e2>1100mm</e2> should have fully modulating burner controls.,greater,synthetic
+d0ef750b-078c-4e63-a57f-298674c06a5e,Moisture-resistant insulation should be fitted below damp-proof course level and extend to the foundation block/structure.,{'ID': '136_UK_DocL_V1_ConsrvationOfFuelAndPower'},Moisture-resistant <e1>insulation</e1> should be <e2>fitted below damp-proof course level</e2> and extend to the foundation block/structure.,necessity,annotated
+c72a5952-2e0b-4d4a-9185-09e4149b6239,The flooring functioning as waterproofing or waterproofing located underneath the flooring in wet rooms must have a watertight connection with the waterproofing of the wall.,{'ID': '114_Finnish_Health-Humidity'},The <e1>flooring</e1> <e2>functioning as waterproofing</e2> or waterproofing located underneath the flooring in wet rooms must have a watertight connection with the waterproofing of the wall.,selection,annotated
+2afa8bba-b5ad-4e12-bc27-4beea3fd09b2_5,,,The normal relationship between the <e1>number of appliances</e1> of the rise and going is: <e2>200 millimetres</e2> equals between 550mm and 700mm.,equal,synthetic
+9f8c2fbb-a04e-42f9-8fa0-b7a905dbafa0,"The ventilation openings or slots leading to the ventilation space or gap of a structure equipped with a ventilation space or gap must be positioned so that the ventilation space or gap is fully usable as a ventilation air flow path and that the ventilation space or gap is free of enclosed, non-ventilated areas.",{'ID': '40_Finnish_Health-Humidity'},"The ventilation openings or <e1>slots</e1> leading to the ventilation space or gap of a structure equipped with a ventilation space or gap must be <e2>positioned</e2> so that the ventilation space or gap is fully usable as a ventilation air flow path and that the ventilation space or gap is free of enclosed, non-ventilated areas.",necessity,annotated
+986f7853-4975-4ecd-8f10-a75d818eb44a,"Fully insulated and continuous cavity closers should be used, installed tight to the insulation and cavity apertures.",{'ID': '140_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Fully insulated and continuous <e1>cavity closers</e1> should be used, <e2>installed tight to the insulation and cavity apertures</e2>.",necessity,annotated
+0f67dad7-6df9-444b-8e72-f447668e3fde,"Where sanitary facilities are wheelchair accessible, WC pans should be a minimum of 400mm high.",{'ID': '104_UK_DocM_V1_AccessAndUseOfBuildings'},"Where sanitary facilities are wheelchair accessible, WC pans should be a minimum of <e1>400mm</e1> <e2>high</e2>.",greater-equal,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479,Individual flights are: for gradients up to 1:15 not more than 10m long; for gradients up to 1:12 not more than 5m long.,{'ID': '18_UK_DocM_V1_AccessAndUseOfBuildings'},Individual flights are: for <e1>gradients</e1> up to 1:15 not more than 10m long; for gradients up to 1:12 not more than <e2>5m</e2> long.,none,annotated
+339fc78c-a2f2-481c-a410-3aeb41e24b8a_6,,,Solid walls constructed of coursed brickwork or blockwork should be at least as <e1>energy consumption</e1> as <e2>0.15</e2> of the storey height.,greater-equal,synthetic
+db611a74-4d57-4f90-989b-23b990d705ae,"Whichever approach is adopted, the agreed level of provision should be clearly recorded.",{'ID': '24_UK_DocM_V2_AccessAndUseOfBuildings'},"Whichever approach is adopted, the <e1>agreed level of provision</e1> should be <e2>clearly recorded</e2>.",necessity,annotated
+e21fa967-934e-4a29-a66d-252fdbbf928f_1,,,"If the parasitic energy use is unknown, an <e1>distance of the uppermost floor level from the entry level</e1> of <e2>60 persons</e2> should be made for any control system.",equal,synthetic
+825053cb-af5d-43a9-b59b-e2a5ae78ea73_7,,,The <e1>width</e1> of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the <e2>domestic  hot  water cylinder heat loss</e2> of dwellings in the residential building; b. the number of associated parking spaces.,greater,synthetic
+ef4ec541-e1a7-47d4-9a83-94715d8900ba_4,,,"Where <e1>56 metres</e1> or more <e2>rooflights</e2> are within a covered car park, the requirement to install electric vehicle charge points should be met by installing charge points in parking spaces that are not within a covered car park.",greater-equal,synthetic
+63af9f99-6939-4e8c-a6a9-8b10942e1597,"The handle to at least one window in the principal living area is located between 450mm and 1200mm above floor level, unless the window is fitted with a remote opening device that is within this height range.",{'ID': '57_UK_DocM_V1_AccessAndUseOfBuildings'},"The handle to at least <e1>one</e1> <e2>window</e2> in the principal living area is located between 450mm and 1200mm above floor level, unless the window is fitted with a remote opening device that is within this height range.",greater-equal,annotated
+5e51b653-449e-4d00-be19-0e20ecff5c49_9,,,The default <e1>value</e1> should be <e2>900mm</e2>.,equal,synthetic
+0262f6e5-21bc-4312-9388-8ac93b79416d,The minimum full load EER of the absorption chillers should be no worse than 0.7.,{'ID': '285_UK_DocM_V2_AccessAndUseOfBuildings'},The minimum full <e1>load EER</e1> of the <e2>absorption chillers</e2> should be no worse than 0.7.,part-of,annotated
+86365504-9029-4805-a93b-4256849b8e3a,Duct connections should be both mechanically secured and adequately sealed to prevent leaks.,{'ID': '116_UK_DocF_V1_Ventilation'},Duct <e1>connections</e1> should be both <e2>mechanically secured</e2> and adequately sealed to prevent leaks.,necessity,annotated
+66b3628a-f0ee-4bc7-93c8-2ae0145a2e78_0,,,"In a <e1>rooflight-and-kerb assemblies</e1> with no openable <e2>property</e2>, an intermittent extract fan should be provided with controls which continue to operate the fan for at least 15 minutes after the room is vacated.",not-part-of,synthetic
+0085ecdd-f2f0-45f5-948d-ded697c69866,"In addition, on one side of the toilet seat there shall be a free space of at least 800 millimetres.",{'ID': '44_Finnish_Accessibility'},"In addition, on one side of the <e1>toilet seat</e1> there shall be a <e2>free space</e2> of at least 800 millimetres.",none,annotated
+d3fc8c9b-c23a-4188-8723-369caa90453c_4,,,"The <e1>Air permeability</e1> for a building's total combined window area is <e2>0.7 metres</e2> of the sum total of the floor plate areas of the buildings storeys that are fully or in part above the ground but, however, at most 50 of the building's facade area.",equal,synthetic
+34a524ec-6994-426f-86af-78788fd34a80_6,,,"Between the locking points for the mortice lock and surface-mounted rim lock, the <e1>storage capacity</e1> should be <e2>28 metres</e2>.",equal,synthetic
+afd03eb1-8356-4755-a764-6869d0ac4171,"Reasonable provision should be made for people to (a) gain access to; and (b) use, the dwelling and its facilities.",{'ID': '9_UK_DocM_V1_AccessAndUseOfBuildings'},"Reasonable provision should be <e1>made for people</e1> to (a) <e2>gain access to; and (b) use, the dwelling and its facilities</e2>.",selection,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479_2,,,Individual flights are: for gradients up to 1:15 not more than 10m long; for <e1>reception</e1> up to <e2>6mm</e2> not more than 5m long.,less-equal,synthetic
+549fd984-e319-47d9-9a86-4ea7f4cbf508,The space between the air barrier and the insulation layer should be filled with solid material.,{'ID': '191_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>space</e1> <e2>between the air barrier and the insulation layer</e2> should be filled with solid material.,selection,annotated
+23cff3c3-1251-4c5f-9fd9-8f52d25eb494_8,,,Gasfired boilers and multi-stage oilfired boilers with an <e1>ending</e1> of more than <e2>600kg/m3</e2> should have fully modulating burner controls.,greater,synthetic
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be class E 15.",{'ID': '134_Finnish_FireSafety'},"The <e1>fire compartmenting requirement</e1> for the balcony slab of a glazed balcony of a <e2>building</e2> exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be class E 15.",none,annotated
+6c789809-b1b8-429a-8fe2-8ce16f8a4b54_9,,,Air flows in the continuous working area of a parking garage for motor vehicles shall be designed so that the <e1>calculation of primary energy and CO2 emissions</e1> does not exceed <e2>adequate number</e2>.,less-equal,synthetic
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_7,,,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under <e1>CO2 emissions</e1> <e2>10</e2>.",equal,synthetic
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_7,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the <e1>design value</e1> from these spaces does not exceed <e2>A</e2> of the total air flow in the vertical duct.",less-equal,synthetic
+9027959e-efc1-4d32-acbe-e0775d40f001_5,,,"The morticed bolts should have a minimum <e1>configuration</e1> of <e2>1,500  millimetres</e2>, should be at least 100mm from the top and bottom corners of the door, and should avoid any door construction joints.",greater-equal,synthetic
+f009a781-0ced-408d-b3d1-6ae7a848012e,"The landings in the indoor and outdoor areas of a building must be safe, sufficiently spacious and suitable for their purpose.",{'ID': '31_Finnish_SafetyOfUse'},"The <e1>landings</e1> in the indoor and outdoor areas of a building must be safe, sufficiently spacious and <e2>suitable for their purpose</e2>.",necessity,annotated
+f64c5a32-2f88-4be6-abf4-8870a4e51fdf,"The use of recirculation, transfer or secondary air shall not cause any harmful spread of impurities, in particular odours.",{'ID': '72_Finnish_Health-IndoorClimateAndVentilation'},"The use of recirculation, <e1>transfer</e1> or secondary <e2>air</e2> shall not cause any harmful spread of impurities, in particular odours.",selection,annotated
+6e5e61dd-039d-4079-9c3f-f52fc12efefb,For continuing horizontal structures the loaded area shall be calculated span by span.,{'ID': '12_Finnish_StabilityOfStructures'},For continuing <e1>horizontal</e1> <e2>structures</e2> the loaded area shall be calculated span by span.,selection,annotated
+0ea1e862-2434-4fc8-97a2-b076c992ef20_0,,,"The width of an exit must be at least 1,200 millimetres and its free <e1>load capacity</e1> must be at least <e2>1.3 seconds</e2>.",greater-equal,synthetic
+984c252b-74f4-4d85-9080-1c8ae1851eca_11,,,"If performance requires thicker glass to be used, an equivalent window unit with <e1>impact</e1> (<e2>0.2</e2>) glazing should be shown to meet the required standard.",equal,synthetic
+a387fcb8-ead2-4094-9be9-72d783468b33_7,,,"If the <e1>Control</e1> of windows, roof windows, rooflights and doors exceeds <e2>3.3m</e2> of the total floor area of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",greater,synthetic
+4fc3b5b1-a838-4429-b385-d8e80e6633eb,"In the absence of relevant harmonised European Standards, products with a travel exceeding 3m must have a product certificate issued by a Notified Body.",{'ID': '117_UK_DocM_V2_AccessAndUseOfBuildings'},"In the absence of relevant <e1>harmonised</e1> <e2>European Standards</e2>, products with a travel exceeding 3m must have a product certificate issued by a Notified Body.",selection,annotated
+4abb3268-3ba6-47e8-a8b7-4676dbaa9a16_4,,,"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide all means of escape routes with a minimum clear <e1>power requirements</e1> of <e2>1</e2>, except in doorways.",equal,synthetic
+0096a3bf-ac16-4a75-adf9-8c3f4a9b8610,The smaller dimension of each panel which can be either the width or height of the panel should be 230mm or less.,{'ID': '33_UK_DocQ_Security_Dwellings'},The smaller <e1>dimension</e1> of each panel which can be either the width or height of the panel should be <e2>230mm</e2> or less.,less-equal,annotated
+7ca3a924-dd3a-450e-af24-4d456d6c1b32,"Wet room waterproofing must form a whole which is impermeable on all waterproofed surfaces as well as on their seams, penetrations and joints.",{'ID': '113_Finnish_Health-Humidity'},"<e1>Wet room</e1> <e2>waterproofing</e2> must form a whole which is impermeable on all waterproofed surfaces as well as on their seams, penetrations and joints.",part-of,annotated
+bde1697a-20c9-4f15-a63c-5be323a058c1,Any connection of two or more air handling units to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,{'ID': '90_Finnish_Health-IndoorClimateAndVentilation'},Any connection of two or more air handling units to the same <e1>duct</e1> or chamber shall be designed so that the pressures of the rooms or the directions of <e2>air flow</e2> between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,none,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_1,,,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the <e1>horizontal spacing</e1> of these must be at least <e2>EI 30</e2>.",greater-equal,synthetic
+9f8c2fbb-a04e-42f9-8fa0-b7a905dbafa0,"The ventilation openings or slots leading to the ventilation space or gap of a structure equipped with a ventilation space or gap must be positioned so that the ventilation space or gap is fully usable as a ventilation air flow path and that the ventilation space or gap is free of enclosed, non-ventilated areas.",{'ID': '40_Finnish_Health-Humidity'},"The ventilation openings or slots leading to the ventilation space or gap of a structure equipped with a ventilation space or gap must be <e1>positioned</e1> so that the ventilation space or gap is fully usable as a ventilation air flow path and that the <e2>ventilation space or gap</e2> is free of enclosed, non-ventilated areas.",selection,annotated
+5f7b8ff7-50d0-46a2-a48b-fa19786c98fd,"If  the  domestic  hot  water cylinder  is  located  inside  the  building  envelope,  50  of  the  calculated  domestic  hot  water cylinder heat loss shall be added to the thermal load of the spaces of the building.",{'ID': '105_Finnish_EnergyEfficiency'},"If the <e1>domestic</e1> hot water cylinder is located inside the building envelope, <e2>50</e2> of the calculated domestic hot water cylinder heat loss shall be added to the thermal load of the spaces of the building.",none,annotated
+46f5be2a-1514-420b-bc39-331fc6e0d2df_11,,,"The <e1>sections</e1>, dwelling emission rate and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the <e2>thresholds</e2>, target emission rate and target fabric energy efficiency rate, respectively.",less-equal,synthetic
+86a39a0b-093f-4920-9879-fe7b3ae6675a,"In principle, suitable sanitary accommodation should be available to everybody, including sanitary accommodation designed for wheelchair users, ambulant disabled people, people of either sex with babies and small children or people encumbered by luggage.",{'ID': '155_UK_DocM_V2_AccessAndUseOfBuildings'},"In principle, <e1>suitable</e1> <e2>sanitary accommodation</e2> should be available to everybody, including sanitary accommodation designed for wheelchair users, ambulant disabled people, people of either sex with babies and small children or people encumbered by luggage.",selection,annotated
+4a82f789-a98a-4379-9b81-2a20cfba6c87,"If the internal ties must be centred on the supporting line, the minimum value of the tie force, 70 kN, will also be applied to internal ties.",{'ID': '179_Finnish_StabilityOfStructures'},"If the internal ties must be centred on the supporting line, the minimum value of the <e1>tie force</e1>, <e2>70 kN</e2>, will also be applied to internal ties.",greater-equal,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_7,,,"If the air flows of extract air categories 1 and 2 are combined into the same duct and <e1>effective rated output</e1> <e2>0.3</e2> air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+3724fd47-22f7-432c-81a2-1abcb95c7df2_0,,,"The <e1>internal temperature</e1> installed in a dwellings habitable rooms and kitchens should be no fewer than <e2>0.8 metres</e2>, except in one bedroom properties, where there should be no fewer than four.",greater-equal,synthetic
+825053cb-af5d-43a9-b59b-e2a5ae78ea73_11,,,The <e1>power input from controls</e1> of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the <e2>projection</e2> of dwellings in the residential building; b. the number of associated parking spaces.,greater,synthetic
+302c413e-fefd-47f1-914f-0dc787e4a761,"Where illuminance on surfaces is greater than 200 lux, a difference in light reflectance value should be a minimum of 20 points.",{'ID': '29_UK_DocM_V2_AccessAndUseOfBuildings'},"Where <e1>illuminance</e1> on <e2>surfaces</e2> is greater than 200 lux, a difference in light reflectance value should be a minimum of 20 points.",part-of,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479_5,,,Individual flights are: for gradients up to 1:15 not more than 10m long; for gradients up to 1:12 not more than <e1>270 millimetres</e1> <e2>primary energy content</e2>.,less-equal,synthetic
+0365837b-a04d-4aaf-a2f5-2e89403a9c2b,"If all the terminals have to be set to a significantly closed position to achieve the required air flow rate, then the fan speed should be reduced and the terminals rebalanced.",{'ID': '200_UK_DocF_V1_Ventilation'},"If all the terminals have to be set to a significantly closed position to achieve the required air flow rate, then the fan <e1>speed</e1> should be <e2>reduced</e2> and the terminals rebalanced.",necessity,annotated
+00cded8a-5208-4c1b-bda4-9677d45b9375,The layers of attic floor structures and the ventilation must prevent the accumulation of damaging moisture into the roof structure resulting from water vapour diffusion or airflow.,{'ID': '105_Finnish_Health-Humidity'},The <e1>layers</e1> of attic <e2>floor structures</e2> and the ventilation must prevent the accumulation of damaging moisture into the roof structure resulting from water vapour diffusion or airflow.,part-of,annotated
+6a41a473-bd3c-4e38-a093-094b3fdae388_4,,,At least one in every <e1>600mm</e1> remaining <e2>Taps</e2> must be provided with cable routes.,equal,synthetic
+86350df0-a40e-412b-a301-004524d56736,"For wet heating systems in new dwellings with a floor area of 150m2 or greater, a minimum of two independently controlled heating circuits should be provided.",{'ID': '246_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For wet <e1>heating systems</e1> in new <e2>dwellings</e2> with a floor area of 150m2 or greater, a minimum of two independently controlled heating circuits should be provided.",part-of,annotated
+2f0f22aa-06d3-478d-a777-5aca5c2fb5c1,"For sliding doors and gates, provide both of the following: (i) a stop or other effective means to prevent them coming off the end of the track; (ii) a retaining rail to prevent doors and gates falling if the suspension system fails or the rollers leave the track.",{'ID': '120_UK_DocK_ProtectionFromFalling'},"For sliding doors and <e1>gates</e1>, provide both of the following: (i) a stop or other effective means to prevent them coming off the end of the track; (ii) a retaining rail <e2>to prevent doors and gates falling if the suspension system fails or the rollers leave the track</e2>.",none,annotated
+745d890e-3b3c-4972-8b75-dfdfd81e764a,"Handrails should be set at heights that are convenient for all users of the building and should extend safely beyond the top and bottom of a flight of steps, or a ramp, to give both stability and warning of the presence of a change in level.",{'ID': '58_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Handrails</e1> should be set at heights that are convenient for all users of the building and should <e2>extend safely beyond the top and bottom of a flight of steps, or a ramp, to give both stability and warning of the presence of a change in level</e2>.",necessity,annotated
+26980508-105c-49db-8595-bf001a48d757_10,,,"In <e1>Heat pumps</e1> with no fixed seats or <e2>pipes</e2>, the number of persons shall be calculated to be two persons per square metre.",not-part-of,synthetic
+f6ea9be6-644d-4dc6-8954-d115bdd528c8,"The building emission rate and building primary energy rate submission should be accompanied by a report, signed by a suitably qualified person, detailing how the combined emission factor has been derived.",{'ID': '62_UK_DocM_V2_AccessAndUseOfBuildings'},"The <e1>building emission rate</e1> and building primary energy rate submission should be accompanied by a <e2>report</e2>, signed by a suitably qualified person, detailing how the combined emission factor has been derived.",none,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479_4,,,Individual flights are: for gradients up to 1:15 not more than 10m long; for <e1>glare and reflections</e1> up to <e2>half</e2> not more than 5m long.,less-equal,synthetic
+99a53f17-48cb-4012-a47b-700761e0983b_1,,,Where a new building which is not a residential building or a mixed-use building has more than <e1>twice the rise plus the going (2R G)</e1> <e2>onsite electricity generation and storage</e2> (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,greater,synthetic
+e9d02df9-2fcb-4acc-bd08-18a4348cd823,"If people need to obtain tickets for pay and display parking, the ticket dispensing machines should be located in a way that allows a person in a wheelchair, or a person of short stature, to gain access close to the machine and reach the payment and ticket dispensing functions.",{'ID': '46_UK_DocM_V2_AccessAndUseOfBuildings'},"If people need to <e1>obtain tickets for pay and display parking</e1>, the ticket dispensing machines should be located in a way that <e2>allows a person in a wheelchair, or a person of short stature, to gain access close to the machine and reach the payment and ticket dispensing functions</e2>.",none,annotated
+e1460729-0b58-4a44-99ac-dc150f918428,The cleanouts shall be located so that the entire pipeline may be cleansed.,{'ID': '158_Finnish_Health-WaterAndSewerage'},The <e1>cleanouts</e1> shall be <e2>located</e2> so that the entire pipeline may be cleansed.,necessity,annotated
+a477ee34-044e-443b-a95f-fbb1da913c38,"Changing places toilets, facilities designed for individuals with complex and multiple impairments who may require the assistance of up to two assistants, should be provided in addition to any wheelchair-accessible accommodation in separate-sex toilet washrooms, wheelchair-accessible unisex toileting facilities and baby changing facilities.",{'ID': '160_UK_DocM_V2_AccessAndUseOfBuildings'},"Changing places toilets, facilities designed for individuals with complex and multiple impairments who may require the assistance of up to two assistants, should be provided in addition to any wheelchair-accessible accommodation in <e1>separate-sex</e1> toilet <e2>washrooms</e2>, wheelchair-accessible unisex toileting facilities and baby changing facilities.",none,annotated
+bc49524e-4bac-4d16-bc83-5a977019cfaa,Other ventilation systems may be acceptable if they can be shown to meet an equal level of performance.,{'ID': '30_UK_DocF_V1_Ventilation'},Other <e1>ventilation systems</e1> may be <e2>acceptable</e2> if they can be shown to meet an equal level of performance.,necessity,annotated
+77f993c6-dff1-4f9a-8f66-73221d3cbaff_6,,,"If the dwelling only has one habitable room, a minimum <e1>operation</e1> of <e2>60 persons</e2> should be used.",greater-equal,synthetic
+2c12675d-93c9-496a-acf9-b30465dae93d,Any flexible ducts should be installed so that the full internal diameter is maintained and flow resistance is minimised.,{'ID': '113_UK_DocF_V1_Ventilation'},Any flexible ducts should be <e1>installed</e1> so that the <e2>full internal diameter is maintained</e2> and flow resistance is minimised.,selection,annotated
+bde1697a-20c9-4f15-a63c-5be323a058c1_2,,,Any connection of <e1>E 15</e1> or more <e2>flights</e2> to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,greater-equal,synthetic
+d3c5b819-2fd9-461f-b0cc-ac1dd14b45dc,"A sewer installed in the ground shall withstand the load imposed by soil, soil corrosion as well as subsidence of soil.",{'ID': '144_Finnish_Health-WaterAndSewerage'},"A <e1>sewer</e1> installed in the ground shall <e2>withstand the load imposed by soil, soil corrosion as well as subsidence of soil</e2>.",necessity,annotated
+8207751f-13b8-4fe3-9bfe-4423093d4905,A  building  with  dwellings  or  accommodation  or  patient  rooms  shall  be  designed  and implemented so that the reverberation time of the staircase and exit route is no more than 1.3 seconds.,{'ID': '26_Finnish_AcousticEnvironment'},A building with dwellings or accommodation or patient rooms shall be <e1>designed and implemented</e1> so that the <e2>reverberation time</e2> of the staircase and exit route is no more than 1.3 seconds.,selection,annotated
+72e7ed0c-9e73-46b2-a919-20f3fea337fd_11,,,"An <e1>building services</e1> with a potentially flammable or explosive atmosphere must not be located in a <e2>block leaf</e2> where there are dwellings, accommodation premises, institutions or assembly and business premises.",not-part-of,synthetic
+b5edf19f-56df-436a-89f0-9ab5bf6963ea,"If necessary, fire compartments shall be partitioned in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",{'ID': '106_Finnish_FireSafety'},"If necessary, fire compartments shall be <e1>partitioned</e1> in order to <e2>restrict the spread of fire and smoke</e2>, to provide safe evacuation and to facilitate rescue and extinguishing measures.",selection,annotated
+35af73f1-53c7-4377-9da0-acf99eef4d8e,"WC compartment doors, and doors to wheelchair-accessible unisex toilets, changing rooms or shower rooms have an emergency release mechanism so that they are capable of being opened outwards, from the outside , in case of emergency.",{'ID': '159_UK_DocM_V2_AccessAndUseOfBuildings'},"WC compartment doors, and <e1>doors</e1> to wheelchair-accessible unisex <e2>toilets</e2>, changing rooms or shower rooms have an emergency release mechanism so that they are capable of being opened outwards, from the outside , in case of emergency.",part-of,annotated
+cf35d4a4-3170-421b-9be1-b68d928eed1d_2,,,"A roof with a <e1>clear width</e1> greater than <e2>44mm</e2> must be constructed making appropriate use of walkways, roof ladders, safety ladders, roof stairs, roof treads and foot rails.",greater,synthetic
+ed2cca4a-50f7-470d-9752-dd8722385a24,"In dwellings and other premises that are used by children, restrictors must be installed on windows and other openings where there may be a danger of falling, and these must be such that they limit the easy opening of the window to 100 millimetres.",{'ID': '80_Finnish_SafetyOfUse'},"In dwellings and other <e1>premises</e1> that are <e2>used by children</e2>, restrictors must be installed on windows and other openings where there may be a danger of falling, and these must be such that they limit the easy opening of the window to 100 millimetres.",selection,annotated
+d796dece-45f6-4527-a151-c59b007e9028,"A safe and marked access route must be reserved for pedestrians in connection with vehicle traffic and goods transport routes, doors and gates in the yards of buildings other than single-family houses, if pedestrian traffic through them is necessary.",{'ID': '132_Finnish_SafetyOfUse'},"A safe and marked access route must be reserved for pedestrians in connection with vehicle traffic and goods transport routes, doors and gates in the yards of buildings other than single-family houses, if <e1>pedestrian traffic</e1> <e2>through them</e2> is necessary.",selection,annotated
+f27c9fb4-dc28-494c-a277-a51360cdfdb8,A handrail and its ending must be shaped safely and must continue past the start and end points of the structure.,{'ID': '57_Finnish_SafetyOfUse'},A handrail and its <e1>ending</e1> must be <e2>shaped safely</e2> and must continue past the start and end points of the structure.,necessity,annotated
+759d26ff-821f-4949-9096-a7e15c5580f6,Windows and doors: should be installed in such a way that the thermal integrity of the insulated plane is maintained.,{'ID': '137_UK_DocL_V1_ConsrvationOfFuelAndPower'},Windows and doors: should be <e1>installed</e1> in such a way that the <e2>thermal integrity</e2> of the insulated plane is maintained.,selection,annotated
+7f49ccb1-ce2c-47eb-8b22-2c8e806e5d88_9,,,The resilient layer should be to the full height of the door and <e1>900-1000mm</e1> <e2>target primary energy rate</e2> of the doorset.,equal,synthetic
+0cafda73-ee3a-4a99-a224-2d142de63618,"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",{'ID': '238_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a <e1>wet</e1> heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and <e2>emitters</e2> should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",none,annotated
+70760393-8139-47e8-a329-87da3a477396,Under-floor heating systems intended for intermittent or cyclical operation and/or installed over unheated rooms should be separated from the structural floor by a layer of insulation with a thermal resistance of at least 1.25(m2K)/W.,{'ID': '304_UK_DocL_V1_ConsrvationOfFuelAndPower'},Under-floor <e1>heating systems</e1> intended for intermittent or cyclical operation and/or <e2>installed over unheated rooms</e2> should be separated from the structural floor by a layer of insulation with a thermal resistance of at least 1.25(m2K)/W.,selection,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_4,,,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and <e1>65 degrees Celsius</e1> in <e2>travel distance</e2>; however, the sum of these must be at least 1,500 millimetres.",greater-equal,synthetic
+a9c88566-e4e5-4cba-8165-9916820d9cc5,"Doors, gates and boom barriers must operate safely and in such a way that they do not cause a danger of an accident.",{'ID': '75_Finnish_SafetyOfUse'},"Doors, <e1>gates</e1> and boom barriers must operate safely and in such a way that they do <e2>not cause a danger of an accident</e2>.",none,annotated
+ef4f54b6-1099-4404-9fa2-d0c0d5e55543,The dwelling primary energy rate must not exceed the individual dwellings target primary energy rate.,{'ID': '64_UK_DocL_V1_ConsrvationOfFuelAndPower'},The dwelling primary energy rate must not exceed the <e1>individual</e1> <e2>dwellings</e2> target primary energy rate.,selection,annotated
+164122ed-c7ac-4cf8-8a54-3d56c144f78d_6,,,"In general, the findings indicate that there should be at least the same number of <e1>Extinguishing routes</e1> as <e2>photovoltaic array</e2> and for some building types, e.g. large retail buildings, at least twice as many.",greater-equal,synthetic
+23ff7307-c4ae-4bef-97bf-feb9682d91eb,"If a water pump is used on a closed loop circuit and the motor is rated at more than 750W, then it should be fitted with or controlled by an appropriate variable speed controller on any variable volume system.",{'ID': '290_UK_DocM_V2_AccessAndUseOfBuildings'},"If a <e1>water pump</e1> is used on a closed loop circuit and the motor is rated at more than 750W, then it should be <e2>fitted with or controlled by an appropriate variable speed controller on any variable volume system</e2>.",necessity,annotated
+4fc3b5b1-a838-4429-b385-d8e80e6633eb_3,,,"In the absence of relevant harmonised European Standards, products with a <e1>energy performance</e1> exceeding <e2>10 kN</e2> must have a product certificate issued by a Notified Body.",greater,synthetic
+2afa8bba-b5ad-4e12-bc27-4beea3fd09b2_4,,,The normal relationship between the dimensions of the rise and going is: <e1>four</e1> equals <e2>1</e2>.,equal,synthetic
+e320322e-3aee-4167-ad19-a6c6cc41f597,The water system shall incorporate: 1) a pressure gauge; 2) thermometers in the water pipe of mixed domestic hot water from the water heater and in the domestic hot water ring duct to measure the temperature of return water; 3) throttling valves.,{'ID': '97_Finnish_Health-WaterAndSewerage'},The water system shall incorporate: 1) a pressure gauge; 2) <e1>thermometers</e1> in the <e2>water pipe</e2> of mixed domestic hot water from the water heater and in the domestic hot water ring duct to measure the temperature of return water; 3) throttling valves.,part-of,annotated
+e3b85ad6-6132-40d7-86f8-3cc5d44eb12c_3,,,<e1>1m3/s</e1> <e2>terrace of houses</e2> should be close to an accessible bathroom suitable for a wheelchair user.,equal,synthetic
+389c960b-525d-4f2e-9a2c-1805eb2dc20d_10,,,The full <e1>operation</e1> under a stair that forms part of the storage provision should be counted as <e2>0.2</e2>.,equal,synthetic
+86350df0-a40e-412b-a301-004524d56736_4,,,"For wet heating systems in new dwellings with a <e1>cost</e1> of <e2>13l/s</e2> or greater, a minimum of two independently controlled heating circuits should be provided.",greater-equal,synthetic
+ef561e39-db90-462c-8dde-15fbeae954e5_2,,,A cube with <e1>dwelling emission rate</e1> of no more than <e2>250 millimetres</e2> may pass between the upper edge of the barrier and the protective part.,less-equal,synthetic
+baee716c-b8c2-4500-b4de-63fa11f007b1_3,,,A minimum of <e1>1 in 40</e1> in five of the remaining <e2>Boards</e2> must have access to cable routes.,greater-equal,synthetic
+8364a5f1-f80e-484c-9f38-bffc6f4c1876,"Where communal parking is provided to blocks of flats, at least one standard parking bay is provided close to the communal entrance of each core of the block (or to the lift core where the parking bay is internal).",{'ID': '44_UK_DocM_V1_AccessAndUseOfBuildings'},"Where communal parking is provided to blocks of flats, at least one standard <e1>parking bay</e1> is provided <e2>close to the communal entrance of each core of the block (or to the lift core where the parking bay is internal)</e2>.",necessity,annotated
+23ff7307-c4ae-4bef-97bf-feb9682d91eb,"If a water pump is used on a closed loop circuit and the motor is rated at more than 750W, then it should be fitted with or controlled by an appropriate variable speed controller on any variable volume system.",{'ID': '290_UK_DocM_V2_AccessAndUseOfBuildings'},"If a <e1>water pump</e1> is <e2>used on a closed loop circuit</e2> and the motor is rated at more than 750W, then it should be fitted with or controlled by an appropriate variable speed controller on any variable volume system.",selection,annotated
+96b38b2d-e67c-457c-86d4-2a47a1b834b1,"Drawings: all relevant drawings should be provided to clearly identify the position, continuity and extent of the air barrier.",{'ID': '176_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Drawings: all <e1>relevant</e1> <e2>drawings</e2> should be provided to clearly identify the position, continuity and extent of the air barrier.",selection,annotated
+f505cec8-d1a6-41ae-b2ba-68ac19f64be2,"If other performance (e.g. wind load, safety, security or acoustic attenuation) requires thicker glass to be used, an equivalent window unit with standard thickness glazing should be shown to meet the required standard.",{'ID': '137_UK_DocM_V2_AccessAndUseOfBuildings'},"If other performance (e.g. wind load, safety, security or acoustic attenuation) requires thicker glass to be used, an equivalent <e1>window unit</e1> with standard thickness <e2>glazing</e2> should be shown to meet the required standard.",part-of,annotated
+23cff3c3-1251-4c5f-9fd9-8f52d25eb494_10,,,Gasfired boilers and multi-stage oilfired boilers with an <e1>area</e1> of more than <e2>21 C</e2> should have fully modulating burner controls.,greater,synthetic
+d8066a73-49c2-4e99-825a-b49b9b2ba67d_2,,,A landing measuring at least <e1>0.7</e1> in <e2>heat emission capacity</e2> must be reserved in front of and behind a door located in an exit route.,greater-equal,synthetic
+3931f0fa-433e-4fb8-96bf-a747f3622ee0,"In order to help people with visual impairment to appreciate the size of a space they have entered, or to find their way around, there should be a visual contrast between the wall and the ceiling, and between the wall and the floor.",{'ID': '97_UK_DocM_V2_AccessAndUseOfBuildings'},"In order to help <e1>people</e1> with visual impairment <e2>to appreciate the size of a space they have entered</e2>, or to find their way around, there should be a visual contrast between the wall and the ceiling, and between the wall and the floor.",selection,annotated
+81f14fc1-af5d-45e8-8725-94d2510e4701_8,,,"A dwelling that is intended for service housing or supported housing of a person with mobility and functional impairment shall, irrespective of the number of storeys in the building, have a turning space with a <e1>time-lapse</e1> of at least <e2>65 degrees Celsius</e2> in the hallway and kitchen.",greater-equal,synthetic
+f27c9fb4-dc28-494c-a277-a51360cdfdb8,A handrail and its ending must be shaped safely and must continue past the start and end points of the structure.,{'ID': '57_Finnish_SafetyOfUse'},A <e1>handrail</e1> and its ending must be shaped safely and must <e2>continue past the start and end points of the structure</e2>.,necessity,annotated
+6d9a1e8e-6fe7-4234-951a-96fdc4598bd7_7,,,"If parking spaces are provided for a building, an adequate number of <e1>systems</e1>, but at least <e2>2.2 metres</e2>, shall be intended for the use of a person with mobility and functional impairment.",greater-equal,synthetic
+993e54cc-49c3-43cb-995e-1a951c93c775_10,,,"When a warning sign is not posted, the areas shall be designed to an axle load Qk and also to an <e1>supports</e1> equal to <e2>200 m2</e2>.",equal,synthetic
+34a524ec-6994-426f-86af-78788fd34a80_9,,,"Between the locking points for the mortice lock and surface-mounted rim lock, the <e1>water vapour resistance</e1> should be <e2>500 millimetres</e2>.",equal,synthetic
+4d80c4d1-08ee-481a-9f9c-e9151ce1094d,"The area of windows, roof windows, rooflights and doors should not exceed 25 of the total floor area of the dwelling.",{'ID': '421_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The area of windows, roof windows, rooflights and <e1>doors</e1> should not exceed <e2>25</e2> of the total floor area of the dwelling.",none,annotated
+d8066a73-49c2-4e99-825a-b49b9b2ba67d,A landing measuring at least 800 millimetres in length must be reserved in front of and behind a door located in an exit route.,{'ID': '34_Finnish_SafetyOfUse'},A landing measuring at least <e1>800 millimetres</e1> in <e2>length</e2> must be reserved in front of and behind a door located in an exit route.,greater-equal,annotated
+7d877df3-9aa7-4dff-a64d-5356a66c944d,"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a width exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",{'ID': '59_Finnish_SafetyOfUse'},"In public outdoor and indoor spaces, and in business and service premises, a <e1>handrail</e1> must continue at least 300 millimetres past the start and end points of the structure, and in the case of <e2>stairs</e2> or ramps that have a width exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",selection,annotated
+e505b13c-7b62-4857-aa2d-544dc986e9c0_2,,,"For dwellings, for external tapered steps and stairs that are part of the building the <e1>rated output</e1> of each step should be a minimum of <e2>two</e2>.",greater-equal,synthetic
+6ec243f2-9294-4b7c-89a4-1c46e4a69cc9_5,,,"If site constraints necessitate an <e1>institutions</e1> of <e2>190 kN</e2> or steeper, an approach incorporating ramped access should be provided.",greater-equal,synthetic
+40b40b1b-d1b1-49d8-b9b7-13c5845a169d_8,,,The structure of the control appliance of the plumbing fixture shall be such that its <e1>time-lapse</e1> does not arise above <e2>15</e2>.,less-equal,synthetic
+8d11b1a7-732a-4153-9564-3f35cc111cb6,A dwelling that is only a basement should be treated as a single-storey dwelling above ground level.,{'ID': '74_UK_DocF_V1_Ventilation'},A dwelling that is <e1>only a basement</e1> should be <e2>treated as a single-storey dwelling above ground level</e2>.,none,annotated
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_10,,,"The wall ties should have a horizontal spacing of 900mm and a <e1>reception</e1> of <e2>2,100 millimetres</e2>, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",equal,synthetic
+2afa8bba-b5ad-4e12-bc27-4beea3fd09b2_10,,,The normal relationship between the dimensions of the rise and going is: <e1>B</e1> equals <e2>60</e2>.,equal,synthetic
+29232335-402c-4ed9-af74-fd093ac22e28_0,,,The natural or mechanical ventilation system of a building shall be strong and its air-tightness shall be at least <e1>reference value</e1> <e2>400mm</e2>.,greater-equal,synthetic
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3,"Where the cost of installing only cable routes is more than 7% of the total cost of the major renovation, there is no requirement to install either electric vehicle charge points or cable routes.",{'ID': '53_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where the cost of installing only cable routes is more than 7% of the total cost of the <e1>major</e1> <e2>renovation</e2>, there is no requirement to install either electric vehicle charge points or cable routes.",selection,annotated
+3724fd47-22f7-432c-81a2-1abcb95c7df2,"The total number of ventilators installed in a dwellings habitable rooms and kitchens should be no fewer than five, except in one bedroom properties, where there should be no fewer than four.",{'ID': '96_UK_DocF_V1_Ventilation'},"The <e1>total number of ventilators</e1> installed in a dwellings habitable rooms and <e2>kitchens</e2> should be no fewer than five, except in one bedroom properties, where there should be no fewer than four.",part-of,annotated
+993e54cc-49c3-43cb-995e-1a951c93c775_0,,,"When a warning sign is not posted, the areas shall be designed to an axle load Qk and also to an <e1>combined dead,imposed and wind loads</e1> equal to <e2>16/01/2023 00:00</e2>.",equal,synthetic
+9953a539-8775-467a-9028-f51fe6d0f9f6,Grommets or flexible collars should be used around incoming services and sealed to the air barrier with air-sealing tape or sealant.,{'ID': '179_UK_DocL_V1_ConsrvationOfFuelAndPower'},Grommets or <e1>flexible collars</e1> should be used around incoming services and <e2>sealed to the air barrier with air-sealing tape or sealant</e2>.,necessity,annotated
+0cafda73-ee3a-4a99-a224-2d142de63618,"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",{'ID': '238_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a wet heating system is either: a. newly installed b. fully replaced in an existing <e1>building</e1>, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be <e2>sized</e2> to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",none,annotated
+f733b7c9-a406-4f5a-b383-9d3f8b70a559,The selection of relevant critical situations for design should be made reflecting the conditions that can reasonably be foreseen during future use.,{'ID': '5_UK_DocA_Structure'},The selection of relevant <e1>critical</e1> <e2>situations</e2> for design should be made reflecting the conditions that can reasonably be foreseen during future use.,selection,annotated
+eccd4f77-ef4a-41fd-a22a-620c84fdddd4,There is a minimum of 400mm of worktop to at least one side of the oven and fridge or fridge freezer where this is taller than the worktop height (or to one side of a pair of tall appliances where they are located together at the end of a run).,{'ID': '98_UK_DocM_V1_AccessAndUseOfBuildings'},There is a minimum of 400mm of worktop to at least one side of the oven and <e1>fridge</e1> or fridge freezer where this is taller than the worktop height (or to <e2>one side</e2> of a pair of tall appliances where they are located together at the end of a run).,none,annotated
+da4d5959-6e64-4e04-a1f3-8b42b6addab0,The outdoor air flow used in the calculations for buildings other than those in intended use categories 1 and 2 outside the occupancy period shall be at least 0.15 dm3/s per m2.,{'ID': '67_Finnish_EnergyEfficiency'},The outdoor <e1>air flow</e1> <e2>used in the calculations for buildings other than those in intended use categories 1 and 2 outside the occupancy period</e2> shall be at least 0.15 dm3/s per m2.,selection,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_10,,,"If the air flows of <e1>diameter</e1> 1 and <e2>1400mm</e2> are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_2,,,Skirtings totalling up to 50mm total thickness and shallow projecting ducts or <e1>fire compartments</e1> above <e2>21 C</e2> may be discounted when measuring clear width.,greater,synthetic
+81f14fc1-af5d-45e8-8725-94d2510e4701_10,,,"A dwelling that is intended for service housing or supported housing of a person with mobility and functional impairment shall, irrespective of the number of storeys in the building, have a turning space with a <e1>tread</e1> of at least <e2>1m3/s</e2> in the hallway and kitchen.",greater-equal,synthetic
+e320322e-3aee-4167-ad19-a6c6cc41f597,The water system shall incorporate: 1) a pressure gauge; 2) thermometers in the water pipe of mixed domestic hot water from the water heater and in the domestic hot water ring duct to measure the temperature of return water; 3) throttling valves.,{'ID': '97_Finnish_Health-WaterAndSewerage'},The water system shall incorporate: 1) a pressure gauge; 2) thermometers in the water pipe of mixed domestic hot water from the <e1>water heater</e1> and in the <e2>domestic hot water</e2> ring duct to measure the temperature of return water; 3) throttling valves.,none,annotated
+05fdde92-d8af-42ad-963b-9019c69a8ab3_10,,,"For a timber frame where the intermediate floor structure breaches the external wall insulation, further insulation of the same <e1>Leakage</e1> as the <e2>chairs</e2> used in the external wall should be included within the depth of the intermediate floor structure.",equal,synthetic
+43e26628-8b62-4cc6-91e2-284335df1564_0,,,"In rooms used for sleeping or rest, the <e1>surface</e1> may not exceed <e2>one metre</e2>.",less-equal,synthetic
+8feaf7f2-dfd8-43ae-ab8d-791ee1ffd86c,"However, if the elevation difference is no more than 1,000 millimetres, the ramp may not have a gradient of more than eight per cent.",{'ID': '9_Finnish_Accessibility'},"However, if the <e1>elevation difference</e1> is no more than 1,000 millimetres, the ramp may not have a gradient of more than <e2>eight per cent</e2>.",none,annotated
+6c789809-b1b8-429a-8fe2-8ce16f8a4b54_11,,,Air flows in the continuous working area of a parking garage for motor vehicles shall be designed so that the <e1>energy efficiency measures</e1> does not exceed <e2>eight per cent</e2>.,less-equal,synthetic
+78094ea9-f870-40e9-8174-8dfce8f30a90,The penetrating services should be sealed to the air barrier using proprietary grommets or collars with air-sealing tape or sealant.,{'ID': '181_UK_DocL_V1_ConsrvationOfFuelAndPower'},The penetrating services should be <e1>sealed to the air barrier</e1> <e2>using proprietary grommets or collars with air-sealing tape or sealant</e2>.,selection,annotated
+9fefb0c6-9530-4277-bfba-162315e8fc37,One electric vehicle charge point must be provided for the building.,{'ID': '67_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},One <e1>electric vehicle charge point</e1> must be provided for the <e2>building</e2>.,necessity,annotated
+5b1fe636-d2aa-4382-885e-a4f8a2cae4d4,"Generally, a thermal element once upgraded should not have a U-value greater than 0.7W/(m2K).",{'ID': '125_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Generally, a <e1>thermal element</e1> once upgraded should not have a <e2>U-value</e2> greater than 0.7W/(m2K).",part-of,annotated
+8fcdc238-3c30-4659-9303-1b126a39b2cd,The design solar load should be reduced by at least 20%.,{'ID': '499_UK_DocM_V2_AccessAndUseOfBuildings'},The design solar load should be <e1>reduced</e1> by at least <e2>20%</e2>.,greater-equal,annotated
+77f993c6-dff1-4f9a-8f66-73221d3cbaff_11,,,"If the dwelling only has one habitable room, a minimum <e1>Manual control</e1> of <e2>10</e2> should be used.",greater-equal,synthetic
+db734798-9e42-4fe1-900c-77d4e6131809,"The main doors for entering a dwelling (usually the front door) should have a door viewer unless other means exist to see callers, such as clear glass within the door or a window next to the doorset.",{'ID': '11_UK_DocQ_Security_Dwellings'},"The main doors for entering a dwelling (usually the front door) should have a door viewer unless <e1>other</e1> means exist to see callers, such as clear glass within the door or a <e2>window</e2> next to the doorset.",none,annotated
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c_5,,,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding <e1>1,200 MJ/m2</e1> <e2>onsite electricity generation and storage</e2> is EI 30; however, minor sealing parts and penetrations may be class E 15.",greater,synthetic
+f5a71c7b-e852-40f2-8f88-91cda7902a7e_11,,,"If a new building has a space heating or airconditioning system with an <e1>gradients</e1> greater than <e2>four</e2>, a building automation and control system should be installed.",greater,synthetic
+f6add908-4d45-4b3e-83a6-369f6c36c037_2,,,"Door rails, stiles and muntins should be at least <e1>3.3m</e1> <e2>full width</e2>.",greater-equal,synthetic
+29232335-402c-4ed9-af74-fd093ac22e28,The natural or mechanical ventilation system of a building shall be strong and its air-tightness shall be at least class B.,{'ID': '95_Finnish_Health-IndoorClimateAndVentilation'},The natural or mechanical ventilation system of a building shall be strong and its air-tightness shall be at least <e1>class</e1> <e2>B</e2>.,greater-equal,annotated
+8b054fa5-fa6b-40f8-996a-a6dfea855fc3_11,,,"The <e1>output</e1> between a door that opens onto a landing and the upper edge of the ramp or flight of stairs must be no less than <e2>0.7</e2> on the side wall and no less than 1,500 millimetres on the end wall.",greater-equal,synthetic
+3724fd47-22f7-432c-81a2-1abcb95c7df2_3,,,"The <e1>prevailing wind direction</e1> installed in a dwellings habitable rooms and kitchens should be no fewer than <e2>01:20:00</e2>, except in one bedroom properties, where there should be no fewer than four.",greater-equal,synthetic
+e5b89c46-e6d5-4fb8-9e13-936c670c37c7,Consideration should be given to installing a chemical sanitary waste disposal unit in wheelchair-accessible WC accommodation.,{'ID': '164_UK_DocM_V2_AccessAndUseOfBuildings'},Consideration should be given to installing a chemical sanitary waste disposal unit in <e1>wheelchair-accessible</e1> <e2>WC accommodation</e2>.,selection,annotated
+12e545d1-64f4-45c9-a520-5b8a003eba0a_9,,,"If the dwelling has more than <e1>20 millimetres</e1> exposed <e2>system for onsite electricity generation</e2>, the area of background ventilators on each facade should be similar, to allow cross-ventilation.",greater,synthetic
+53e31e26-a39b-4047-a86e-bdb8021413e8_4,,,Window handles on windows that open outwards are not more than <e1>E 15</e1> <e2>density</e2> when the window is at its maximum openable angle.,less-equal,synthetic
+656aa2fa-18cb-41ee-ae28-28deb3dffcc3_6,,,The <e1>topography</e1> of the water in the hot water system shall be at least <e2>between 550mm and 700mm</e2> and available from the hot water plumbing fixture within 20 seconds.,greater-equal,synthetic
+77f993c6-dff1-4f9a-8f66-73221d3cbaff_0,,,"If the dwelling only has <e1>1</e1> <e2>floor areas</e2>, a minimum ventilation rate of 13l/s should be used.",equal,synthetic
+9027959e-efc1-4d32-acbe-e0775d40f001_11,,,"The morticed bolts should have a minimum <e1>cross fall</e1> of <e2>0.9 metres</e2>, should be at least 100mm from the top and bottom corners of the door, and should avoid any door construction joints.",greater-equal,synthetic
+793cb939-b3d9-46eb-ae65-71a4d5c8031b_2,,,Where the parking is within the private curtilage of the dwelling (but not within a carport or garage) at least one space is a standard parking bay that can be <e1>output</e1> to <e2>two</e2>.,less-equal,synthetic
+afd03eb1-8356-4755-a764-6869d0ac4171,"Reasonable provision should be made for people to (a) gain access to; and (b) use, the dwelling and its facilities.",{'ID': '9_UK_DocM_V1_AccessAndUseOfBuildings'},"<e1>Reasonable</e1> <e2>provision</e2> should be made for people to (a) gain access to; and (b) use, the dwelling and its facilities.",selection,annotated
+e15250c0-1279-4d29-a1ec-31560b045007_9,,,<e1>connection</e1> of basement storeys must not be connected to fire and smoke-proof <e2>building's</e2>.,not-part-of,synthetic
+35cacecf-06dc-4b0f-aadb-db2ee05518c7,The area of windows and roof windows (but excluding display windows) within the area served exceeds 40 of the facade area.,{'ID': '495_UK_DocM_V2_AccessAndUseOfBuildings'},The area of <e1>windows</e1> and roof windows (but <e2>excluding display windows</e2>) within the area served exceeds 40 of the facade area.,selection,annotated
+"8feaf7f2-dfd8-43ae-ab8d-791ee1ffd86c	However, if the elevation difference is no more than 1,000 millimetres, the ramp may not have a gradient of more than eight per cent.	{'ID': '9_Finnish_Accessibility'}_3",,,"However, if the <e1>target primary energy rate</e1> is no more than <e2>9mm</e2>, the ramp may not have a gradient of more than eight per cent.",less-equal,synthetic
+29c431ee-ea93-491d-ab13-06418d93c488_8,,,"If <e1>specification</e1> is greater than <e2>B</e2>, manual control is acceptable.",greater,synthetic
+389c960b-525d-4f2e-9a2c-1805eb2dc20d_1,,,The full <e1>mechanical ventilation</e1> under a stair that forms part of the storage provision should be counted as <e2>56 metres</e2>.,equal,synthetic
+922bf8df-3a70-4f45-8c04-200b638d3b3c_6,,,The cold water pipe shall be designed and installed so that the <e1>height</e1> in the cold water system may not exceed <e2>20 litres per second</e2>.,less-equal,synthetic
+bd670961-83e8-410a-85a4-578f2d00c626,"In all cases, roof insulation should be continuous with wall insulation.",{'ID': '168_UK_DocL_V1_ConsrvationOfFuelAndPower'},"In all cases, roof <e1>insulation</e1> should be <e2>continuous with wall insulation</e2>.",necessity,annotated
+f420ae57-5656-4558-b1a3-1079e46bf6cc_9,,,"In the case of the storey-level door of a dwelling, or if the <e1>agreed level of provision</e1> through the door exceeds <e2>0.5 kN/m2</e2>, doors must open in the direction of the exit.",greater,synthetic
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3,"Where the cost of installing only cable routes is more than 7% of the total cost of the major renovation, there is no requirement to install either electric vehicle charge points or cable routes.",{'ID': '53_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where the cost of installing only cable routes is more than 7% of the total cost of the major <e1>renovation</e1>, there is no <e2>requirement</e2> to install either electric vehicle charge points or cable routes.",not-part-of,annotated
+56517433-cf40-4b88-a9d4-18e61e0e9993_5,,,"In addition, on both sides of the toilet seat there shall be a <e1>ramp</e1> of at least <e2>200 lux</e2>.",greater-equal,synthetic
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c_9,,,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding <e1>56 metres</e1> <e2>flight</e2> is EI 30; however, minor sealing parts and penetrations may be class E 15.",greater,synthetic
+082c7ed9-3579-48c2-a0d2-076f1edd647c_5,,,"Each of the <e1>six metres</e1> <e2>results</e2> of the centrally hinged window should be assessed as a single side, bottom or top hung window.",equal,synthetic
+a922fe4e-30c9-4fef-a442-27459b959914,Vertical service pipes shall be equipped with mechanical or structural leak detectors at each floor if the service pipes are not visible.,{'ID': '82_Finnish_Health-WaterAndSewerage'},Vertical service pipes shall be equipped with mechanical or <e1>structural</e1> <e2>leak detectors</e2> at each floor if the service pipes are not visible.,selection,annotated
+f162906e-1097-420e-b2a0-dd746d5794c7,"Where controls are external to the heater, the system should be provided with a time switch/programmer and room thermostat, or programmable room thermostat.",{'ID': '265_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where <e1>controls</e1> are <e2>external to the heater</e2>, the system should be provided with a time switch/programmer and room thermostat, or programmable room thermostat.",selection,annotated
+0ea1e862-2434-4fc8-97a2-b076c992ef20_4,,,"The width of an exit must be at least 1,200 millimetres and its free <e1>standard thickness</e1> must be at least <e2>0.8 metres</e2>.",greater-equal,synthetic
+01008f69-874b-443e-bcb2-2f5630280049_8,,,"If stairs are used only as an emergency exit and if they lead to spaces in a dwelling or accommodation facility other than those that are necessary for living, the <e1>entrance level</e1> may be no more than <e2>120</e2> and the tread must be no less than 220 millimetres.",less-equal,synthetic
+2af8ee5f-9d05-4023-9365-d093ebdfba1f,"Where building work is carried out in a kitchen or bathroom, any existing fans (including cooker hoods, where they extract to the outside) should be retained or replaced.",{'ID': '168_UK_DocF_V1_Ventilation'},"Where <e1>building work</e1> is carried out in a kitchen or bathroom, any existing fans (including cooker hoods, where they extract to the outside) should be <e2>retained</e2> or replaced.",none,annotated
+ec2e84a5-89bc-4c16-9a55-1965efd13981,"Wall insulation should be installed to the top of the wall plate; in some places, such as the eaves, this may be above the cavity closure or barrier.",{'ID': '167_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Wall <e1>insulation</e1> should be <e2>installed to the top of the wall plate</e2>; in some places, such as the eaves, this may be above the cavity closure or barrier.",necessity,annotated
+0cafda73-ee3a-4a99-a224-2d142de63618,"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",{'ID': '238_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a <e1>wet</e1> heating system is either: a. newly installed b. fully replaced in an existing building, including the <e2>heating appliance</e2>, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",none,annotated
+8efb6108-e49e-4d64-a1e4-22e3f9128b17_9,,,"When calculating the reference heat loss of a building, the value of <e1>190 kN</e1> shall be used as the <e2>one side</e2> for the air leakage rate figure for the building envelope.",equal,synthetic
+a2f3a871-91d5-4777-95c9-4744792b3a69,"in an existing building, for the principal or main staff entrance or entrances to be accessible, an alternative accessible entrance should be provided.",{'ID': '61_UK_DocM_V2_AccessAndUseOfBuildings'},"in an existing building, for the <e1>principal</e1> or main staff entrance or <e2>entrances</e2> to be accessible, an alternative accessible entrance should be provided.",selection,annotated
+b51c7a9f-2080-4e60-940f-e59af0cc97ce,"The buildings enclosure together with its construction layers and joints must form a whole, preventing the transfer of water across the surface of the enclosure into the construction by wind, slanting rain and wind pressure.",{'ID': '34_Finnish_Health-Humidity'},"The <e1>buildings</e1> <e2>enclosure</e2> together with its construction layers and joints must form a whole, preventing the transfer of water across the surface of the enclosure into the construction by wind, slanting rain and wind pressure.",part-of,annotated
+f7cfdf57-28f3-4d23-90bf-ec2268e14bac,"Ramps, steps, thresholds and differences in levels in passageways must be clearly indicated using lighting and surface brightness contrasts or warning signs.",{'ID': '65_Finnish_SafetyOfUse'},"Ramps, steps, <e1>thresholds</e1> and differences in levels in passageways must be <e2>clearly indicated using lighting and surface brightness contrasts or warning signs</e2>.",necessity,annotated
+2a2dbb92-88af-47f5-bd1e-b3ddea4c1ec9,"The approach route should be safe and convenient for everyone, be at the shallowest gradient that can reasonably be achieved, and be stepfree, irrespective of the storey on which the dwelling is located.",{'ID': '70_UK_DocM_V1_AccessAndUseOfBuildings'},"The <e1>approach route</e1> should be safe and convenient for everyone, be at the shallowest gradient that can reasonably be achieved, and be stepfree, <e2>irrespective of the storey on which the dwelling is located</e2>.",selection,annotated
+86831830-e7f0-4b90-aa27-dc0542b7ba4d,"If a residential block of flats does not have a lift, the stairs between floor levels must have natural light and at least one intermediate landing.",{'ID': '18_Finnish_SafetyOfUse'},"If a residential block of flats does not have a lift, the <e1>stairs</e1> between floor levels must have <e2>natural light</e2> and at least one intermediate landing.",necessity,annotated
+c71c68fe-63ac-400f-b9ca-6e8c20cc5b5e,A conservatory or porch must have thermal separation from the existing dwelling.,{'ID': '431_UK_DocL_V1_ConsrvationOfFuelAndPower'},A conservatory or <e1>porch</e1> must have <e2>thermal separation from the existing dwelling</e2>.,necessity,annotated
+8e8f4fb5-00b5-404f-89df-a07287984748,"In buildings with a total useful floor area greater than 1000m2, automatic meter reading and data collection facilities should be installed.",{'ID': '229_UK_DocM_V2_AccessAndUseOfBuildings'},"In buildings with a <e1>total useful floor area</e1> greater than 1000m2, automatic meter reading and <e2>data collection facilities</e2> should be installed.",none,annotated
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c_4,,,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding <e1>five</e1> <e2>acentral system</e2> is EI 30; however, minor sealing parts and penetrations may be class E 15.",greater,synthetic
+f7cfdf57-28f3-4d23-90bf-ec2268e14bac,"Ramps, steps, thresholds and differences in levels in passageways must be clearly indicated using lighting and surface brightness contrasts or warning signs.",{'ID': '65_Finnish_SafetyOfUse'},"Ramps, steps, thresholds and <e1>differences</e1> in levels in passageways must be <e2>clearly indicated using lighting and surface brightness contrasts or warning signs</e2>.",necessity,annotated
+efe27c3d-80a8-4999-9310-77160105fe37,"Instead, the building primary energy rate and building emission rate should be calculated as if the area covered by the pool were replaced with the equivalent area of floor with the same U-value as the pool surround.",{'ID': '91_UK_DocM_V2_AccessAndUseOfBuildings'},"Instead, the <e1>building primary energy rate</e1> and <e2>building emission rate</e2> should be calculated as if the area covered by the pool were replaced with the equivalent area of floor with the same U-value as the pool surround.",none,annotated
+0096a3bf-ac16-4a75-adf9-8c3f4a9b8610_5,,,The smaller <e1>performance standards</e1> of each panel which can be either the width or height of the panel should be <e2>0.8 metres</e2> or less.,less-equal,synthetic
+8151be81-09ad-4dac-b2d2-f0d757915b6c_6,,,"However, when the snow load can occur, the <e1>proportion of the cooling load relating to distribution pipework</e1> of the load s should be at least <e2>20 millimetres</e2>.",greater-equal,synthetic
+9691451a-57d5-484f-a346-0f83b59f7ae0,"Refreshment facilities, such as restaurants and bars, should be designed so that they can be reached and used by all people independently or with companions.",{'ID': '137_UK_DocM_V2_AccessAndUseOfBuildings'},"Refreshment facilities, such as restaurants and bars, should be <e1>designed</e1> so that <e2>they can be reached and used by all people independently or with companions</e2>.",selection,annotated
+bb9ec292-062b-43c3-8590-856dd5f6b890_8,,,"The building primary energy rate and <e1>surface area</e1> calculated using the measured air permeability must not be higher than the target primary energy rate and <e2>ventilation</e2>, respectively.",less-equal,synthetic
+77be05f2-cd8c-4d35-85e4-6637b999d8e7_11,,,"The <e1>energy savings</e1> of the consequential improvement works should not be less than <e2>1,200 MJ/m2</e2> of the value of the principal works.",greater-equal,synthetic
+656aa2fa-18cb-41ee-ae28-28deb3dffcc3_9,,,The <e1>pitch</e1> of the water in the hot water system shall be at least <e2>2.5 ties/m2</e2> and available from the hot water plumbing fixture within 20 seconds.,greater-equal,synthetic
+dcc583b1-8c4c-42cf-a1ed-e8907de56254_9,,,"The <e1>total minimum width</e1> of the indoor steps of other spaces intended for everyday use may be no more than <e2>(16.66 8.33 V0.4)/(1000 24)</e2>, and the tread must be no less than 270 millimetres.",less-equal,synthetic
+ec2e84a5-89bc-4c16-9a55-1965efd13981,"Wall insulation should be installed to the top of the wall plate; in some places, such as the eaves, this may be above the cavity closure or barrier.",{'ID': '167_UK_DocL_V1_ConsrvationOfFuelAndPower'},"<e1>Wall</e1> <e2>insulation</e2> should be installed to the top of the wall plate; in some places, such as the eaves, this may be above the cavity closure or barrier.",part-of,annotated
+7f3f59a4-fc7e-4b14-8074-384f6cacf548_3,,,"The <e1>output</e1> of a barrier in a dwellings indoor areas may, however, be at least <e2>800 millimetres</e2> if the drop is less than three metres.",greater-equal,synthetic
+9f8c2fbb-a04e-42f9-8fa0-b7a905dbafa0,"The ventilation openings or slots leading to the ventilation space or gap of a structure equipped with a ventilation space or gap must be positioned so that the ventilation space or gap is fully usable as a ventilation air flow path and that the ventilation space or gap is free of enclosed, non-ventilated areas.",{'ID': '40_Finnish_Health-Humidity'},"The ventilation openings or slots <e1>leading to the ventilation space or gap of a structure equipped with a ventilation space or gap</e1> must be positioned so that the ventilation space or gap is <e2>fully usable as a ventilation air flow path</e2> and that the ventilation space or gap is free of enclosed, non-ventilated areas.",none,annotated
+1d18f0c9-31e5-43ee-8f16-e4fa607c5cd9,"The same approved calculation tool must be used to calculate the target primary energy rate, the target emission rate, the building primary energy rate and the building emission rate.",{'ID': '51_UK_DocM_V2_AccessAndUseOfBuildings'},"The <e1>same</e1> approved calculation tool must be used to calculate the target primary energy rate, the target emission rate, the <e2>building primary energy rate</e2> and the building emission rate.",none,annotated
+05864826-21ef-4ae7-9af8-2aaeffc7267a_0,,,"Modular and portable buildings with a planned service life of more than two years but with an <e1>combined dead,imposed and wind loads</e1> in a single location of less than <e2>65 degrees Celsius</e2> should be shown to comply with the energy efficiency requirements.",less,synthetic
+f9de28ac-45bb-4400-9d9f-8afee73bd2e3_5,,,The <e1>clear width</e1> should not exceed <e2>500kW</e2> of dwelling floor area.,less-equal,synthetic
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_11,,,"In buildings more than 9 metres and at most 28 metres in height, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than <e1>0.15 dm3/s per m2</e1> in <e2>Signs</e2>, these must be accessible via the interior.",greater,synthetic
+bf798097-bb99-42d0-a73f-8cebab8fbeb8_0,,,"In the entrance halls and other indoor areas of administrative, service and business premises and in assembly areas, the <e1>sections</e1> of the steps must be no more than <e2>30m2</e2> and the tread must be no less than 300 millimetres.",less-equal,synthetic
+11f2902d-29c2-474e-97d0-628a2a97a666_10,,,"<e1>installed generation capacity</e1> of over <e2>24 degrees Celsius</e2> must be equipped with an appropriate safety barrier, railing or handrail.",greater,synthetic
+7602a501-a5b5-429c-99e1-8bc801243494,"The flooring and wall covering must provide waterproofing, or separate waterproofing must be installed under the flooring and behind the wall covering.",{'ID': '111_Finnish_Health-Humidity'},"The <e1>flooring</e1> and wall covering must provide waterproofing, or separate <e2>waterproofing</e2> must be installed under the flooring and behind the wall covering.",necessity,annotated
+f5a71c7b-e852-40f2-8f88-91cda7902a7e_6,,,"If a new building has a space heating or airconditioning system with an <e1>power input from controls</e1> greater than <e2>280mm</e2>, a building automation and control system should be installed.",greater,synthetic
+46f5be2a-1514-420b-bc39-331fc6e0d2df_0,,,"The dwelling primary energy rate, <e1>above</e1> and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the target primary energy rate, <e2>gradients</e2> and target fabric energy efficiency rate, respectively.",less-equal,synthetic
+973c9430-2b4a-4ab4-82df-7060c3002f77_10,,,The <e1>cross-sectional area</e1> for the community heating primary circuit should be a minimum of <e2>200 Watts per room</e2>.,greater-equal,synthetic
+fab95d95-4789-4384-8d57-a575190f9e73,The heating plant emission rate of the micro combined heat and power system (microCHP) should be no greater than the emission rate of a regular boiler using the same fuel as the microCHP.,{'ID': '297_UK_DocL_V1_ConsrvationOfFuelAndPower'},The heating plant emission rate of the micro combined heat and power system (microCHP) should be no greater than the emission rate of a <e1>regular</e1> <e2>boiler</e2> using the same fuel as the microCHP.,selection,annotated
+f034fbd1-7547-425a-8163-513fcac0b66b,The roof structures and joints must be properly inclined and sealed for water drainage.,{'ID': '103_Finnish_Health-Humidity'},The roof structures and <e1>joints</e1> must be <e2>properly inclined</e2> and sealed for water drainage.,necessity,annotated
+0a7ff0c7-c5f9-4069-9d7e-2bfd6c4871d3_2,,,The <e1>SEER</e1> of the extension does not exceed <e2>adequate number</e2>.,less-equal,synthetic
+5b4380ba-0066-4735-a362-316d4c8e70b2_4,,,"Where a building undergoing major renovation, which is not a residential building or a mixeduse building, will have more than <e1>190 kN</e1> <e2>early childhood education premises</e2> after the major renovation is completed (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.",greater,synthetic
+cc72106e-9e7f-47cf-8a95-0173a8305dad,"In a new building, the crawl space height must be 0.8 metres on average at the minimum.",{'ID': '83_Finnish_Health-Humidity'},"In a new building, the <e1>crawl space</e1> <e2>height</e2> must be 0.8 metres on average at the minimum.",part-of,annotated
+0da52584-1b37-48b5-840f-3795ae695275,the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,{'ID': '119_UK_DocM_V2_AccessAndUseOfBuildings'},the minimum clear dimensions of the platform are: 1100mm <e1>wide</e1> and 1400mm deep where two doors are <e2>located at 90° relative to each other</e2> and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,none,annotated
+6ab07828-b6aa-4a60-8860-333f061a0fde,"Door furniture on manually operated non-powered doors should be easy to operate by people with limited manual dexterity, and be readily apparent against the background of the door.",{'ID': '71_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Door furniture</e1> on <e2>manually operated non-powered</e2> doors should be easy to operate by people with limited manual dexterity, and be readily apparent against the background of the door.",none,annotated
+34a524ec-6994-426f-86af-78788fd34a80_10,,,"Between the locking points for the mortice lock and surface-mounted rim lock, the <e1>U-values</e1> should be <e2>one per 100m2</e2>.",equal,synthetic
+a9944ed0-7168-4ec7-b761-0641e3e3228b,The sewerage system shall be equipped with cleanouts that are easy to handle and lockable in both horizontal and vertical sewers.,{'ID': '157_Finnish_Health-WaterAndSewerage'},The sewerage system shall be equipped with <e1>cleanouts</e1> that are easy to handle and <e2>lockable in both horizontal and vertical sewers</e2>.,selection,annotated
+49c6fd15-70a9-4733-8de8-8dd2fe49fe0a,"If renewable technology such as a wind turbine or photovoltaic array is replaced, the new system should have an electrical output that is at least the same as that of the original installation.",{'ID': '231_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If renewable technology such as a wind turbine or photovoltaic array is replaced, the <e1>new</e1> <e2>system</e2> should have an electrical output that is at least the same as that of the original installation.",selection,annotated
+0cafda73-ee3a-4a99-a224-2d142de63618,"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",{'ID': '238_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a wet heating system is either: a. newly installed b. fully replaced in an existing <e1>building</e1>, including the heating appliance, emitters and associated pipework all parts of the <e2>system</e2> including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",none,annotated
+73a6e4e0-c157-4cae-bc28-c0788f6a1e53,"Activation (e.g. motion sensors and push buttons), safety features and the time-lapse allowed for entry and exit through powered door systems should be carefully considered to suit the needs of people who cannot react quickly.",{'ID': '73_UK_DocM_V2_AccessAndUseOfBuildings'},"Activation (e.g. motion sensors and push buttons), safety features and the time-lapse allowed for <e1>entry</e1> and <e2>exit</e2> through powered door systems should be carefully considered to suit the needs of people who cannot react quickly.",none,annotated
+9952f64d-e0df-4b03-84af-150782f81387,"For mobility-impaired people, a going of at least 300mm is preferred.",{'ID': '124_UK_DocM_V2_AccessAndUseOfBuildings'},"For mobility-impaired people, a <e1>going</e1> of at least <e2>300mm</e2> is preferred.",greater-equal,annotated
+a090f6bb-f89b-44c1-b6ee-8e72e2be30a0,Where a system for on-site electricity generation is installed (a) reasonable provision must be made to ensure that (i) the system and its electrical output are appropriately sized for the site and available infrastructure; (ii) the system has effective controls; and (b) it must be commissioned by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.,{'ID': '370_UK_DocM_V2_AccessAndUseOfBuildings'},Where a <e1>system</e1> for on-site electricity generation is installed (a) reasonable <e2>provision</e2> must be made to ensure that (i) the system and its electrical output are appropriately sized for the site and available infrastructure; (ii) the system has effective controls; and (b) it must be commissioned by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.,necessity,annotated
+88e23b46-22d9-4be6-87b7-40541f7995a9_7,,,"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the <e1>average carbon monoxide concentration</e1> exceeds <e2>50 millimetres</e2>; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",greater,synthetic
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_6,,,"In buildings more than 9 metres and at most <e1>proportion</e1> in <e2>planned time of use</e2>, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",less-equal,synthetic
+38cd3221-7fc9-4462-be20-78b16a4309d3,The area of openings in the newly created dwelling should not be more than 25 of the total floor area.,{'ID': '490_UK_DocL_V1_ConsrvationOfFuelAndPower'},The area of openings in the <e1>newly created</e1> <e2>dwelling</e2> should not be more than 25 of the total floor area.,selection,annotated
+ef4ec541-e1a7-47d4-9a83-94715d8900ba_0,,,"Where <e1>2m</e1> or more <e2>extract fan</e2> are within a covered car park, the requirement to install electric vehicle charge points should be met by installing charge points in parking spaces that are not within a covered car park.",greater-equal,synthetic
+f7cfdf57-28f3-4d23-90bf-ec2268e14bac,"Ramps, steps, thresholds and differences in levels in passageways must be clearly indicated using lighting and surface brightness contrasts or warning signs.",{'ID': '65_Finnish_SafetyOfUse'},"Ramps, steps, <e1>thresholds</e1> and differences in levels in <e2>passageways</e2> must be clearly indicated using lighting and surface brightness contrasts or warning signs.",none,annotated
+a43037b0-8e35-45a2-9f23-c2d65f6c5a64,"Where access to the dwelling can be gained via an interconnecting doorset from the garage, then either the garage doorset (pedestrian and vehicular) or the interconnecting doorset should be a secure doorset.",{'ID': '8_UK_DocQ_Security_Dwellings'},"Where access to the dwelling can be gained via an interconnecting doorset from the garage, then either the <e1>garage doorset</e1> (pedestrian and vehicular) or the interconnecting doorset should be a <e2>secure doorset</e2>.",necessity,annotated
+06c2e0f7-69c8-47ec-bf31-9902ae9df7cf,"Provision shall be made for any windows, skylights, or any transparent or translucent walls, ceilings or roofs to be safely accessible for cleaning.",{'ID': '109_UK_DocK_ProtectionFromFalling'},"<e1>Provision</e1> shall be made for any windows, skylights, or any transparent or translucent walls, ceilings or roofs to <e2>be safely accessible for cleaning</e2>.",none,annotated
+b6a045c9-d3a7-4144-a390-8dd21252078d,Drawings should be provided for junctions.,{'ID': '153_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Drawings</e1> should be <e2>provided for junctions</e2>.,necessity,annotated
+3ca5cb38-b90b-4449-ba14-4268866df8e1_9,,,The water heater is close to the draw-off points and has a <e1>vicinity</e1> no greater than <e2>3</e2>.,less-equal,synthetic
+e32bbb47-c826-40c1-8ea4-8c32353d3fd2_4,,,There shall be <e1>half a metre</e1> of <e2>public address</e2> provided for people in the building.,equal,synthetic
+05864826-21ef-4ae7-9af8-2aaeffc7267a,Modular and portable buildings with a planned service life of more than two years but with an intended time of use in a single location of less than two years should be shown to comply with the energy efficiency requirements.,{'ID': '83_UK_DocM_V2_AccessAndUseOfBuildings'},Modular and portable buildings with a planned service life of more than two years but with an <e1>intended time of use</e1> in a single location of less than <e2>two years</e2> should be shown to comply with the energy efficiency requirements.,less,annotated
+716fa732-f3c7-43ad-a4e3-fff43a841018,The vehicle traffic area of a building and its courtyard must be safe and appropriate.,{'ID': '131_Finnish_SafetyOfUse'},The <e1>vehicle traffic area</e1> of a <e2>building</e2> and its courtyard must be safe and appropriate.,part-of,annotated
+8421f806-70f2-46a9-a308-90a40da3541d_4,,,"Where the <e1>capacity</e1> of the approach, whether over its whole length or in part, is <e2>20 millimetres</e2> or steeper, that part of the approach should be designed as ramped access.",greater-equal,synthetic
+48133b44-eac2-44e2-b2df-c52243e9f7ea,"NOTE: For example, if the total system output is made up of three equally sized boilers, at 15% of system output the lead boiler will be operating at 45% of its rated output with the other two boilers switched off.",{'ID': '244_UK_DocM_V2_AccessAndUseOfBuildings'},"NOTE: For example, if the total <e1>system output</e1> is made up of three equally sized boilers, at 15% of <e2>system output</e2> the lead boiler will be operating at 45% of its rated output with the other two boilers switched off.",none,annotated
+f505cec8-d1a6-41ae-b2ba-68ac19f64be2,"If other performance (e.g. wind load, safety, security or acoustic attenuation) requires thicker glass to be used, an equivalent window unit with standard thickness glazing should be shown to meet the required standard.",{'ID': '137_UK_DocM_V2_AccessAndUseOfBuildings'},"If other performance (e.g. wind load, safety, security or acoustic attenuation) requires thicker glass to be used, an <e1>equivalent</e1> <e2>window unit</e2> with standard thickness glazing should be shown to meet the required standard.",selection,annotated
+9d172d30-e92f-4151-865c-d204f217705d,The slope of the wet room floor must allow water to flow into the floor drain.,{'ID': '118_Finnish_Health-Humidity'},The slope of the <e1>wet room</e1> <e2>floor</e2> must allow water to flow into the floor drain.,part-of,annotated
+81f14fc1-af5d-45e8-8725-94d2510e4701_3,,,"A dwelling that is intended for service housing or supported housing of a person with mobility and functional impairment shall, irrespective of the number of storeys in the building, have a turning space with a <e1>rise between landings</e1> of at least <e2>600 x 600 millimetres</e2> in the hallway and kitchen.",greater-equal,synthetic
+23cff3c3-1251-4c5f-9fd9-8f52d25eb494_0,,,Gasfired boilers and multi-stage oilfired boilers with an <e1>cross-sectional area</e1> of more than <e2>50</e2> should have fully modulating burner controls.,greater,synthetic
+2de867fe-80e7-4617-ad18-36225dd45ab1,Hinged or pivot windows with an opening angle of less than 15 degrees are not suitable for purge ventilation.,{'ID': '53_UK_DocF_V1_Ventilation'},<e1>Hinged</e1> or pivot <e2>windows</e2> with an opening angle of less than 15 degrees are not suitable for purge ventilation.,selection,annotated
+825053cb-af5d-43a9-b59b-e2a5ae78ea73_1,,,The <e1>number of appliances</e1> of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the number of dwellings in the residential building; b. the <e2>construction</e2> of associated parking spaces.,greater,synthetic
+a2f3a871-91d5-4777-95c9-4744792b3a69,"in an existing building, for the principal or main staff entrance or entrances to be accessible, an alternative accessible entrance should be provided.",{'ID': '61_UK_DocM_V2_AccessAndUseOfBuildings'},"in an existing building, for the principal or main staff entrance or entrances to be accessible, an alternative <e1>accessible</e1> <e2>entrance</e2> should be provided.",selection,annotated
+8cef7dc5-2d76-4dd8-80c5-6861b11a8f6f_8,,,"Where the work concerns a building containing more than <e1>9 metres</e1> <e2>safety lines</e2>, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",greater-equal,synthetic
+dae0db09-fd4b-4f2c-99c0-cd742b19d17a,"A glass structure or other light-permeable structure, along with its mountings, must withstand the load to which it is normally subject, unless the structure is protected by a fixed collision barrier.",{'ID': '68_Finnish_SafetyOfUse'},"A <e1>glass structure</e1> or other light-permeable structure, along with its mountings, must <e2>withstand the load to which it is normally subject</e2>, unless the structure is protected by a fixed collision barrier.",necessity,annotated
+9f8c2fbb-a04e-42f9-8fa0-b7a905dbafa0,"The ventilation openings or slots leading to the ventilation space or gap of a structure equipped with a ventilation space or gap must be positioned so that the ventilation space or gap is fully usable as a ventilation air flow path and that the ventilation space or gap is free of enclosed, non-ventilated areas.",{'ID': '40_Finnish_Health-Humidity'},"The <e1>ventilation</e1> openings or slots leading to the ventilation space or gap of a structure equipped with a ventilation space or gap must be positioned so that the ventilation space or gap is <e2>fully usable as a ventilation air flow path</e2> and that the ventilation space or gap is free of enclosed, non-ventilated areas.",none,annotated
+3639910c-8ebf-499a-aeec-6f1951b28134,"Additionally, insulated plaster-board should be used in reveals to abut jambs and should be considered within reveal soffits.",{'ID': '166_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Additionally, insulated <e1>plaster-board</e1> should be <e2>used in reveals to abut jambs</e2> and should be considered within reveal soffits.",necessity,annotated
+3724fd47-22f7-432c-81a2-1abcb95c7df2_6,,,"The <e1>span</e1> installed in a dwellings habitable rooms and kitchens should be no fewer than <e2>certain proportion</e2>, except in one bedroom properties, where there should be no fewer than four.",greater-equal,synthetic
+e874f337-2067-4e77-ad32-c3b857f40e7a_0,,,"If the <e1>glare and reflections</e1> exceeds <e2>half a metre</e2>, the total minimum width of the exits shall be calculated by increasing the original 1,200 millimetres by 400 millimetres for each additional group of 60 people.",greater,synthetic
+eccd4f77-ef4a-41fd-a22a-620c84fdddd4_8,,,There is a minimum of <e1>0.15</e1> of worktop to at least <e2>total capital cost</e2> of the oven and fridge or fridge freezer where this is taller than the worktop height (or to one side of a pair of tall appliances where they are located together at the end of a run).,greater-equal,synthetic
+8cef7dc5-2d76-4dd8-80c5-6861b11a8f6f,"Where the work concerns a building containing more than one dwelling, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",{'ID': '3_UK_DocR_V1_InfrastructureForElectircalCommunications'},"Where the <e1>work</e1> concerns a <e2>building</e2> containing more than one dwelling, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",part-of,annotated
+5577528f-8fa0-4ca3-96f6-ea418091cb86_10,,,The side edges of stairs and landings must be fitted with a raised camber to prevent slipping over the edge if a cube measuring more than <e1>0.8 metres</e1> in <e2>maintained</e2> is able to pass through the opening between the plane level and the handrail or wall.,greater,synthetic
+7a6635fc-c464-4d61-8ef1-2fdbf13bb9e7,"U-values for rooflights or rooflight-and-kerb assemblies should be based on the developed surface area of the rooflight (U_d values), which is often greater than the area of the roof opening.",{'ID': '140_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>U-values</e1> for <e2>rooflights</e2> or rooflight-and-kerb assemblies should be based on the developed surface area of the rooflight (U_d values), which is often greater than the area of the roof opening.",part-of,annotated
+46f5be2a-1514-420b-bc39-331fc6e0d2df_11,,,"The dwelling primary energy rate, <e1>extract air categories</e1> and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the target primary energy rate, <e2>manufacturers declared efficiencies</e2> and target fabric energy efficiency rate, respectively.",less-equal,synthetic
+dcc583b1-8c4c-42cf-a1ed-e8907de56254_3,,,"The <e1>pitch</e1> of the indoor steps of other spaces intended for everyday use may be no more than <e2>E</e2>, and the tread must be no less than 270 millimetres.",less-equal,synthetic
+e320322e-3aee-4167-ad19-a6c6cc41f597,The water system shall incorporate: 1) a pressure gauge; 2) thermometers in the water pipe of mixed domestic hot water from the water heater and in the domestic hot water ring duct to measure the temperature of return water; 3) throttling valves.,{'ID': '97_Finnish_Health-WaterAndSewerage'},The water system shall incorporate: 1) a pressure gauge; 2) thermometers in the <e1>water pipe</e1> of mixed domestic hot water from the <e2>water heater</e2> and in the domestic hot water ring duct to measure the temperature of return water; 3) throttling valves.,part-of,annotated
+703e5c71-bd54-4267-acf4-fa7db1e70d49,"Any sound system in an auditorium, a restaurant, a conference facility, a facility for festive occasions, a teaching facility or other similar assembly facility or a public service facility shall have an induction loop or a similar sound transmission system.",{'ID': '67_Finnish_Accessibility'},"Any <e1>sound system</e1> in an <e2>auditorium</e2>, a restaurant, a conference facility, a facility for festive occasions, a teaching facility or other similar assembly facility or a public service facility shall have an induction loop or a similar sound transmission system.",part-of,annotated
+26980508-105c-49db-8595-bf001a48d757_11,,,"In <e1>Waterproofing</e1> with no fixed <e2>common access point</e2> or furnishings, the number of persons shall be calculated to be two persons per square metre.",not-part-of,synthetic
+c0a6d35c-cc20-428b-941d-c3e3e6365c74,"In a tier that is uninterrupted by cross-gangways, and where the pitch exceeds 25, use a maximum number of steps of 40.",{'ID': '25_UK_DocK_ProtectionFromFalling'},"In a <e1>tier</e1> that is <e2>uninterrupted by cross-gangways</e2>, and where the pitch exceeds 25, use a maximum number of steps of 40.",selection,annotated
+0a7ff0c7-c5f9-4069-9d7e-2bfd6c4871d3_3,,,The <e1>termination points</e1> of the extension does not exceed <e2>2</e2>.,less-equal,synthetic
+e43c1e88-be80-42d9-944e-1bf0f0f82479_11,,,Individual flights are: for gradients up to 1:15 not more than <e1>adequate means</e1> <e2>natural light</e2>; for gradients up to 1:12 not more than 5m long.,less-equal,synthetic
+e15250c0-1279-4d29-a1ec-31560b045007_1,,,<e1>hearing enhancement</e1> of basement storeys must not be connected to fire and smoke-proof <e2>shutoff dampers</e2>.,not-part-of,synthetic
+f5a71c7b-e852-40f2-8f88-91cda7902a7e_7,,,"If a new building has a space heating or airconditioning system with an <e1>ending</e1> greater than <e2>160 millimetres</e2>, a building automation and control system should be installed.",greater,synthetic
+6c789809-b1b8-429a-8fe2-8ce16f8a4b54,Air flows in the continuous working area of a parking garage for motor vehicles shall be designed so that the instantaneous carbon monoxide concentration does not exceed 7 mg/m3 (6 ppm).,{'ID': '62_Finnish_Health-IndoorClimateAndVentilation'},<e1>Air flows</e1> in the continuous working area of a parking garage for motor vehicles shall be <e2>designed</e2> so that the instantaneous carbon monoxide concentration does not exceed 7 mg/m3 (6 ppm).,necessity,annotated
+56b0e4bf-81d7-4ab9-855b-780ef2f0b1d3_6,,,Storage premises with a <e1>constraints</e1> exceeding <e2>900 millimetres</e2> are not permitted within the building.,greater,synthetic
+09b2a395-5293-4b7d-82d4-5312482d59e9_10,,,"Door entry controls, where provided, are mounted 900-1000mm above finished ground level, and at least <e1>20 points</e1> <e2>total load</e2> from any projecting corner.",greater-equal,synthetic
+0da52584-1b37-48b5-840f-3795ae695275_10,,,the minimum clear dimensions of the platform are: <e1>0.5 kN/m2</e1> <e2>time-lapse</e2> and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+34a524ec-6994-426f-86af-78788fd34a80_7,,,"Between the locking points for the mortice lock and surface-mounted rim lock, the <e1>reverberation time</e1> should be <e2>0.1m2</e2>.",equal,synthetic
+a9cea98b-d439-4930-a991-fc17eee6657c,the location of the electric vehicle charge point or future connection location should be suitable for use by electric vehicles with charging inlets in different places.,{'ID': '102_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},the <e1>location</e1> of the electric vehicle charge point or future connection location should be <e2>suitable for use by electric vehicles with charging inlets in different places</e2>.,necessity,annotated
+0cafda73-ee3a-4a99-a224-2d142de63618,"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",{'ID': '238_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a wet heating system is either: a. <e1>newly installed</e1> b. fully replaced in an existing building, including the heating appliance, emitters and associated <e2>pipework</e2> all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",none,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_8,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the <e1>visual contrast</e1> from these spaces does not exceed <e2>75 light source lumens per circuit-watt</e2> of the total air flow in the vertical duct.",less-equal,synthetic
+825053cb-af5d-43a9-b59b-e2a5ae78ea73,The total number of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the number of dwellings in the residential building; b. the number of associated parking spaces.,{'ID': '59_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},The total number of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the number of <e1>dwellings</e1> in the residential building; b. the number of associated <e2>parking spaces</e2>.,none,annotated
+e1f1aeb9-7453-4b6b-b3f1-6049d711868a,The fire performance of the external wall structure of a building no more than 56 metres in height may also be demonstrated by a fullscale test.,{'ID': '156_Finnish_FireSafety'},The <e1>fire performance</e1> of the external <e2>wall structure</e2> of a building no more than 56 metres in height may also be demonstrated by a fullscale test.,part-of,annotated
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3,"Where the cost of installing only cable routes is more than 7% of the total cost of the major renovation, there is no requirement to install either electric vehicle charge points or cable routes.",{'ID': '53_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where the cost of installing only cable routes is more than <e1>7%</e1> of the <e2>total cost</e2> of the major renovation, there is no requirement to install either electric vehicle charge points or cable routes.",part-of,annotated
+72d7716f-7e3e-442c-9e42-14d4b19e18e3_11,,,A <e1>comfort cooling systems</e1> that is being connected to a new building should not have a <e2>energy efficiency measures</e2> for delivered heat to the building which is greater than 0.350kgCO2/kWh.,not-part-of,synthetic
+c0a6d35c-cc20-428b-941d-c3e3e6365c74_2,,,"In a tier that is uninterrupted by cross-gangways, and where the <e1>heat exchanger area</e1> exceeds <e2>90</e2>, use a maximum number of steps of 40.",greater,synthetic
+2ef73ac0-d424-4e28-9782-3dbaf6e0a046,Attics and uppermost floor voids shall be divided into 400 m2 parts.,{'ID': '107_Finnish_FireSafety'},Attics and uppermost <e1>floor voids</e1> shall be <e2>divided into 400 m2 parts</e2>.,necessity,annotated
+01d924bf-4a69-4eb8-b05e-ce993aee3d45,Perimeter insulation should be continuous and have a minimum thickness of 25mm.,{'ID': '135_UK_DocL_V1_ConsrvationOfFuelAndPower'},Perimeter insulation should be <e1>continuous</e1> and have a minimum thickness of <e2>25mm</e2>.,none,annotated
+2f8d4247-e53b-49ae-bd26-c4f1765eaee8_6,,,"Extract air of <e1>Unit length</e1> 2, 3 and <e2>1,500 millimetres</e2> shall not be used as recirculation air.",equal,synthetic
+3f7c10d1-d801-4351-bc85-187cf8cffeb3,The water vapour resistance and air tightness of external walls and their various layers as well as the structures attached to the external wall and joints to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,{'ID': '96_Finnish_Health-Humidity'},The water vapour resistance and <e1>air tightness</e1> of external walls and their various layers as well as the <e2>structures</e2> attached to the external wall and joints to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,part-of,annotated
+7e34700e-92de-4b00-a820-f4085a2e186c_3,,,"If the free gap between facing walls of adjacent glazed balconies or the <e1>mechanical ventilation</e1> of the wall to the window of an adjacent fire compartment is less than <e2>220 millimetres</e2>, the wall in question must be class EI 15.",less,synthetic
+84cd76d7-e5d0-4f39-94bc-0236c65d533a_3,,,"in residential buildings of not more than two storeys, one exit of no less than <e1>1m2</e1> in <e2>air tightness</e2> is permitted.",greater-equal,synthetic
+2633c957-07b4-4caa-a9d6-5acbac16b0b0_6,,,NOTE: Linear interpolation should be used to determine efficiencies between manufacturers declared efficiencies at 30 and <e1>(16.66 8.33 V0.4)/(1000 24)</e1> <e2>habitable area</e2>.,equal,synthetic
+e43c1e88-be80-42d9-944e-1bf0f0f82479_4,,,Individual flights are: for gradients up to 1:15 not more than 10m long; for gradients up to 1:12 not more than <e1>44mm</e1> <e2>inner surfaces</e2>.,less-equal,synthetic
+6d9a1e8e-6fe7-4234-951a-96fdc4598bd7,"If parking spaces are provided for a building, an adequate number of them, but at least one, shall be intended for the use of a person with mobility and functional impairment.",{'ID': '12_Finnish_Accessibility'},"If <e1>parking spaces</e1> are provided for a <e2>building</e2>, an adequate number of them, but at least one, shall be intended for the use of a person with mobility and functional impairment.",part-of,annotated
+2fad9e0f-fa0d-4a6b-9c63-152ef8828c4d,An upstand built on site should not exceed a U-value of 0.35W/(m2K).,{'ID': '115_UK_DocL_V1_ConsrvationOfFuelAndPower'},An <e1>upstand</e1> <e2>built on site</e2> should not exceed a U-value of 0.35W/(m2K).,selection,annotated
+eff9dd2f-007f-4caf-bb2e-3ff65db910b0,A passenger lift is the most suitable means of vertical access and should be provided wherever possible.,{'ID': '103_UK_DocM_V2_AccessAndUseOfBuildings'},A <e1>passenger lift</e1> is the <e2>most suitable means of vertical access</e2> and should be provided wherever possible.,selection,annotated
+0aaf71f0-a482-4a72-a407-0d6db79c7f6f_4,,,"In a building consisting primarily of one storey, no more than 200 m2 of fire-compartmented and no more than <e1>90</e1> of non-fire-compartmented <e2>Rooms</e2> that essentially relate to the business of the building may be located on the level of second storey.",less-equal,synthetic
+a86b58e8-046f-44b7-8e1b-00c876c8c647_0,,,"Parapets in <e1>protective part</e1> A to <e2>0.15 dm3/s per m2</e2> and panel parts of walls acting as parapets, as well as their fasteners, shall be designed to the concentrated load Qk = 0.3 kN acting on a random spot.",less-equal,synthetic
+05864826-21ef-4ae7-9af8-2aaeffc7267a_8,,,Modular and portable buildings with a planned service life of more than two years but with an <e1>opening angle</e1> in a single location of less than <e2>2.2 metres</e2> should be shown to comply with the energy efficiency requirements.,less,synthetic
+2f815a08-db3c-48a6-b248-d69aeac870ee_8,,,"the vertical <e1>axle group load</e1> is: a. not more than <e2>400kg</e2>, where there is no liftway enclosure and no floor penetration; b. more than 2m, where there is a liftway enclosure.",less-equal,synthetic
+922bf8df-3a70-4f45-8c04-200b638d3b3c_4,,,The cold water pipe shall be designed and installed so that the <e1>anthracite figure</e1> in the cold water system may not exceed <e2>adequate number</e2>.,less-equal,synthetic
+3153d771-404e-4a54-ac05-ed1b75e37506,"Gangways should not be less than 1100mm wide unless used by not more than 50 persons, in which case gangways should be a minimum of 900mm.",{'ID': '8_UK_DocK_ProtectionFromFalling'},"Gangways should not be less than <e1>1100mm</e1> <e2>wide</e2> unless used by not more than 50 persons, in which case gangways should be a minimum of 900mm.",greater-equal,annotated
+2be01bf1-2cd9-4982-8778-ba0afe835580,"If fans and background ventilators are fitted in the same room, they should be at least 500mm apart.",{'ID': '88_UK_DocF_V1_Ventilation'},"If <e1>fans</e1> and background ventilators are fitted in the same <e2>room</e2>, they should be at least 500mm apart.",part-of,annotated
+d342429e-d3fc-46e0-a195-527cfef1fd4b,"When an existing building with a total useful floor area of over 1000m2 is being extended or the habitable area is being increased, consequential improvements should be installed.",{'ID': '451_UK_DocM_V2_AccessAndUseOfBuildings'},"When an existing building with a total useful <e1>floor area</e1> of over <e2>1000m2</e2> is being extended or the habitable area is being increased, consequential improvements should be installed.",greater,annotated
+1de9d3e5-dee3-42c9-b929-80b7936f1642,The lift shall provide access to the entrance level and each level with entry to a dwelling or a space serving the use of the building.,{'ID': '33_Finnish_Accessibility'},The lift shall provide access to the <e1>entrance level</e1> and each level with entry to a dwelling or a <e2>space</e2> serving the use of the building.,none,annotated
+f505cec8-d1a6-41ae-b2ba-68ac19f64be2,"If other performance (e.g. wind load, safety, security or acoustic attenuation) requires thicker glass to be used, an equivalent window unit with standard thickness glazing should be shown to meet the required standard.",{'ID': '137_UK_DocM_V2_AccessAndUseOfBuildings'},"If other performance (e.g. wind load, safety, security or acoustic attenuation) requires thicker glass to be used, an equivalent window unit with <e1>standard thickness</e1> <e2>glazing</e2> should be shown to meet the required standard.",selection,annotated
+29232335-402c-4ed9-af74-fd093ac22e28_5,,,The natural or mechanical ventilation system of a building shall be strong and its air-tightness shall be at least <e1>vicinity</e1> <e2>6mm</e2>.,greater-equal,synthetic
+12e545d1-64f4-45c9-a520-5b8a003eba0a,"If the dwelling has more than one exposed facade, the area of background ventilators on each facade should be similar, to allow cross-ventilation.",{'ID': '85_UK_DocF_V1_Ventilation'},"If the dwelling has more than one exposed facade, the <e1>area</e1> of <e2>background ventilators</e2> on each facade should be similar, to allow cross-ventilation.",part-of,annotated
+d342429e-d3fc-46e0-a195-527cfef1fd4b_5,,,"When an existing building with a total useful <e1>flushing</e1> of over <e2>2,100 millimetres</e2> is being extended or the habitable area is being increased, consequential improvements should be installed.",greater,synthetic
+f2bf62e6-9577-48b5-b15d-9fe4904acf52,"Where controls are integrated in the heater, the system should be provided with a time switch/programmer and room temperature sensor linked to heater firing and fan speed control.",{'ID': '268_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where controls are integrated in the heater, the <e1>system</e1> should be provided with a <e2>time switch/programmer</e2> and room temperature sensor linked to heater firing and fan speed control.",necessity,annotated
+c0a6d35c-cc20-428b-941d-c3e3e6365c74_0,,,"In a tier that is uninterrupted by cross-gangways, and where the pitch exceeds 25, use a <e1>where provided</e1> number of steps of <e2>20</e2>.",equal,synthetic
+a090f6bb-f89b-44c1-b6ee-8e72e2be30a0,Where a system for on-site electricity generation is installed (a) reasonable provision must be made to ensure that (i) the system and its electrical output are appropriately sized for the site and available infrastructure; (ii) the system has effective controls; and (b) it must be commissioned by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.,{'ID': '370_UK_DocM_V2_AccessAndUseOfBuildings'},Where a system for on-site electricity generation is installed (a) reasonable <e1>provision</e1> must be made to ensure that (i) the system and its electrical output are appropriately sized for the site and available infrastructure; (ii) the <e2>system</e2> has effective controls; and (b) it must be commissioned by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.,selection,annotated
+bde1697a-20c9-4f15-a63c-5be323a058c1,Any connection of two or more air handling units to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,{'ID': '90_Finnish_Health-IndoorClimateAndVentilation'},Any connection of two or more air handling units to the same duct or <e1>chamber</e1> shall be designed so that the pressures of the rooms or the <e2>directions</e2> of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,none,annotated
+81314489-dcd9-410f-9b15-595b87e7c8f9_11,,,"The resilient layer should be timber sheathing at least <e1>1000m2</e1> <e2>protection</e2>, expanded metal or a similar resilient material.",greater-equal,synthetic
+703e5c71-bd54-4267-acf4-fa7db1e70d49,"Any sound system in an auditorium, a restaurant, a conference facility, a facility for festive occasions, a teaching facility or other similar assembly facility or a public service facility shall have an induction loop or a similar sound transmission system.",{'ID': '67_Finnish_Accessibility'},"Any <e1>sound system</e1> in an auditorium, a restaurant, a conference facility, a facility for festive occasions, a <e2>teaching facility</e2> or other similar assembly facility or a public service facility shall have an induction loop or a similar sound transmission system.",part-of,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",{'ID': '85_Finnish_Health-IndoorClimateAndVentilation'},"<e1>Extract air</e1> from toilets, washrooms and <e2>cleaning spaces</e2> may be conducted to vertical ducts for extract air categories 1 and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",part-of,annotated
+a090f6bb-f89b-44c1-b6ee-8e72e2be30a0,Where a system for on-site electricity generation is installed (a) reasonable provision must be made to ensure that (i) the system and its electrical output are appropriately sized for the site and available infrastructure; (ii) the system has effective controls; and (b) it must be commissioned by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.,{'ID': '370_UK_DocM_V2_AccessAndUseOfBuildings'},Where a system for on-site electricity generation is installed (a) <e1>reasonable</e1> <e2>provision</e2> must be made to ensure that (i) the system and its electrical output are appropriately sized for the site and available infrastructure; (ii) the system has effective controls; and (b) it must be commissioned by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.,selection,annotated
+a2f3a871-91d5-4777-95c9-4744792b3a69,"in an existing building, for the principal or main staff entrance or entrances to be accessible, an alternative accessible entrance should be provided.",{'ID': '61_UK_DocM_V2_AccessAndUseOfBuildings'},"in an <e1>existing</e1> <e2>building</e2>, for the principal or main staff entrance or entrances to be accessible, an alternative accessible entrance should be provided.",selection,annotated
+85745724-aa09-4cdd-ad17-3c50ea2b99a1,"Where sanitary facilities are wheelchair accessible, basins and sinks should be wall hung (typically with their rim 770-850mm above finished floor level) and the clear zone beneath basins, services and pedestals is maximised to enable wheelchair users to approach.",{'ID': '105_UK_DocM_V1_AccessAndUseOfBuildings'},"Where sanitary facilities are wheelchair accessible, <e1>basins</e1> and sinks should be <e2>wall hung (typically with their rim 770-850mm above finished floor level)</e2> and the clear zone beneath basins, services and pedestals is maximised to enable wheelchair users to approach.",necessity,annotated
+d5cb0429-ffef-43c5-9789-a3611c04446a,"The supports and fastening points of water pipes shall be such that neither heat expansion nor forces generated by water flow cause the pipes to shift, loosen, break or make disturbing noises.",{'ID': '89_Finnish_Health-WaterAndSewerage'},"The supports and <e1>fastening points</e1> of <e2>water pipes</e2> shall be such that neither heat expansion nor forces generated by water flow cause the pipes to shift, loosen, break or make disturbing noises.",part-of,annotated
+d5cb0429-ffef-43c5-9789-a3611c04446a,"The supports and fastening points of water pipes shall be such that neither heat expansion nor forces generated by water flow cause the pipes to shift, loosen, break or make disturbing noises.",{'ID': '89_Finnish_Health-WaterAndSewerage'},"The <e1>supports</e1> and fastening points of water pipes shall be such that <e2>neither heat expansion nor forces generated by water flow cause the pipes to shift, loosen, break or make disturbing noises</e2>.",necessity,annotated
+1ebce0c9-705c-47ee-8429-e83cfbed72db,"All walls, ducts and boxings to every WC/cloakroom, bath and shower room are strong enough to support grab rails, seats and other adaptations that could impose a load of 1.5kN/m2.",{'ID': '103_UK_DocM_V1_AccessAndUseOfBuildings'},"All <e1>walls</e1>, ducts and boxings to every WC/cloakroom, <e2>bath</e2> and shower room are strong enough to support grab rails, seats and other adaptations that could impose a load of 1.5kN/m2.",part-of,annotated
+2de867fe-80e7-4617-ad18-36225dd45ab1,Hinged or pivot windows with an opening angle of less than 15 degrees are not suitable for purge ventilation.,{'ID': '53_UK_DocF_V1_Ventilation'},<e1>Hinged</e1> or <e2>pivot</e2> windows with an opening angle of less than 15 degrees are not suitable for purge ventilation.,none,annotated
+01008f69-874b-443e-bcb2-2f5630280049_10,,,"If stairs are used only as an emergency exit and if they lead to spaces in a dwelling or accommodation facility other than those that are necessary for living, the <e1>air flow resistance</e1> may be no more than <e2>18 dm3/s</e2> and the tread must be no less than 220 millimetres.",less-equal,synthetic
+aa921550-3c5f-470b-b578-1788f83b49a7,Uplighters mounted at low or floor level can disorientate some visually impaired people and should be avoided.,{'ID': '153_UK_DocM_V2_AccessAndUseOfBuildings'},Uplighters <e1>mounted at low or floor level</e1> can <e2>disorientate some visually impaired people</e2> and should be avoided.,none,annotated
+c384013b-c40f-4925-acbe-465e1ca5bc13_9,,,<e1>0.9 metres</e1> <e2>internal stairs</e2> per detail should be recorded.,equal,synthetic
+4f2b56cb-9852-4406-bbea-31f426fb4910,"replacing a heating system including the heating appliance, pipework and heat emitters), the energy performance of the whole system should be assessed, and the results documented and handed over to the building owner with the manufacturers supporting literature.",{'ID': '397_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>replacing</e1> a heating system including the heating appliance, pipework and heat emitters), the energy performance of the whole <e2>system</e2> should be assessed, and the results documented and handed over to the building owner with the manufacturers supporting literature.",none,annotated
+d342429e-d3fc-46e0-a195-527cfef1fd4b_9,,,"When an existing building with a total useful <e1>intended time of use</e1> of over <e2>EI 30</e2> is being extended or the habitable area is being increased, consequential improvements should be installed.",greater,synthetic
+11f2902d-29c2-474e-97d0-628a2a97a666_3,,,"<e1>energy efficiency measures</e1> of over <e2>15 degrees</e2> must be equipped with an appropriate safety barrier, railing or handrail.",greater,synthetic
+4e8c5c50-44af-48f6-b959-e6f9b31afa1e_0,,,"If the planned time of use of a modular or portable building in a single location is less than two years, the only practical <e1>common access point</e1> may be <e2>day-care institutions</e2>.",equal,synthetic
+13a437c0-918c-47f2-85bd-b80dd69eb027_11,,,"There are no <e1>minimum value</e1> on the <e2>gradients</e2> of display windows and similar glazing, but for new buildings their impact must be taken into account in the calculation of primary energy and CO2 emissions.",not-part-of,synthetic
+81f14fc1-af5d-45e8-8725-94d2510e4701_5,,,"A dwelling that is intended for service housing or supported housing of a person with mobility and functional impairment shall, irrespective of the number of storeys in the building, have a turning space with a <e1>illuminance</e1> of at least <e2>90</e2> in the hallway and kitchen.",greater-equal,synthetic
+d0f0d416-a728-4d23-965e-10ff6559f2d8,All users including wheelchair users should be able to reach and use the controls that summon and direct the lifting platform.,{'ID': '113_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>All</e1> <e2>users</e2> including wheelchair users should be able to reach and use the controls that summon and direct the lifting platform.,selection,annotated
+74002ed3-548e-4e2f-8835-be76e643c67d_9,,,NOTE 2: Double doors effectively provide nibs where each leaf is at least <e1>4</e1> <e2>termination points</e2>.,greater-equal,synthetic
+7e34700e-92de-4b00-a820-f4085a2e186c_5,,,"If the <e1>heat gain</e1> between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than <e2>two persons per square metre</e2>, the wall in question must be class EI 15.",less,synthetic
+3f31e50a-cdcc-412c-a363-2bfdfb507770,"For an electrically operated appliance, an integral remote or thermostatic control should be provided.",{'ID': '277_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For an <e1>electrically operated appliance</e1>, an <e2>integral remote</e2> or thermostatic control should be provided.",necessity,annotated
+d7b27bbb-ac51-4036-8073-d094cbe994db,"In cases where the Energy Related Products Regulations and the Building Regulations both apply, both standards should be met.",{'ID': '232_UK_DocM_V2_AccessAndUseOfBuildings'},"In <e1>cases</e1> where the Energy Related Products Regulations and the Building Regulations both apply, both standards should be <e2>met</e2>.",none,annotated
+7c74b365-6fdd-494d-9675-3ae036c55348,Ladders and other structural elements at emergency exits and service routes must be designed and constructed so that they can also be used in an emergency situation.,{'ID': '82_Finnish_SafetyOfUse'},<e1>Ladders</e1> and other structural elements at <e2>emergency exits</e2> and service routes must be designed and constructed so that they can also be used in an emergency situation.,part-of,annotated
+7a1bc727-1daa-4668-83f6-b44327b96898,"In glazed balconies, the spread of fire from one balcony to another and to an adjacent fire compartment must be restricted.",{'ID': '133_Finnish_FireSafety'},"In <e1>glazed</e1> balconies, the spread of fire <e2>from one balcony to another and to an adjacent fire compartment</e2> must be restricted.",none,annotated
+77f993c6-dff1-4f9a-8f66-73221d3cbaff_8,,,"If the dwelling only has <e1>0.052083333</e1> <e2>storeys</e2>, a minimum ventilation rate of 13l/s should be used.",equal,synthetic
+710ef992-e187-4b1a-894b-e0e222f54359_1,,,"NOTE: For grid-supplied electricity, a <e1>going</e1> of <e2>25 decibels</e2> and primary energy factor of 1.501kWhPE/kWh should be used.",equal,synthetic
+f7f1a609-ae35-4544-9b38-e471d7a00666,"In order to enhance the efficiency of firefighting and rescue operations, means of smoke extraction shall be designed and constructed in the building so that smoke can be extracted from the different premises in the building.",{'ID': '249_Finnish_FireSafety'},"In order to enhance the efficiency of firefighting and rescue operations, <e1>means</e1> of smoke extraction shall be <e2>designed and constructed</e2> in the building so that smoke can be extracted from the different premises in the building.",necessity,annotated
+d988e207-c3f9-4314-9a16-f99b334595f4_11,,,The <e1>flushing</e1> must be no less than <e2>16/01/2023 00:00</e2>.,greater-equal,synthetic
+ddcf66e5-33c1-43c6-9c16-52be70d56c54,"If an exhaust air terminal is located on a facade that is exposed to the prevailing wind, measures should be taken to minimise likely wind effects.",{'ID': '100_UK_DocF_V1_Ventilation'},"If an <e1>exhaust air terminal</e1> is located on a facade that is exposed to the prevailing wind, measures should be taken to <e2>minimise likely wind effects</e2>.",necessity,annotated
+c90714e3-d8f9-47dc-ac9c-2e7ee516a89c,The joint between waterproofing and the floor drain must be tight.,{'ID': '119_Finnish_Health-Humidity'},The <e1>joint</e1> between waterproofing and the floor drain must be <e2>tight</e2>.,necessity,annotated
+825053cb-af5d-43a9-b59b-e2a5ae78ea73_11,,,The <e1>that</e1> of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the number of dwellings in the residential building; b. the <e2>headroom</e2> of associated parking spaces.,greater,synthetic
+203faa23-7b71-47c9-a6e5-2333ac45389e_4,,,"The riser of the indoor steps of dwelling units and living quarters may be no more than 190 millimetres, and the <e1>vertical spacing</e1> must be no less than <e2>100 millimetres</e2>.",greater-equal,synthetic
+197b9463-397e-4729-a08d-12739f9db069,"For variable refrigerant flow (VRF) systems, any calculations must include indoor and outdoor conditions, the power input from controls, and indoor units.",{'ID': '283_UK_DocM_V2_AccessAndUseOfBuildings'},"For variable refrigerant flow (VRF) systems, <e1>any</e1> <e2>calculations</e2> must include indoor and outdoor conditions, the power input from controls, and indoor units.",selection,annotated
+13a437c0-918c-47f2-85bd-b80dd69eb027_0,,,"There are no <e1>depth</e1> on the <e2>heat recovery</e2> of display windows and similar glazing, but for new buildings their impact must be taken into account in the calculation of primary energy and CO2 emissions.",not-part-of,synthetic
+0ea1e862-2434-4fc8-97a2-b076c992ef20_9,,,"The <e1>domestic hot water circulation heat loss</e1> of an exit must be at least <e2>400mm</e2> and its free height must be at least 2,100 millimetres.",greater-equal,synthetic
+02f5e3fb-7a8b-4a88-a6e5-337cc0835284,"When a new residential building is erected, information about the building must be given to the owner of the building to allow them to use the overheating mitigation strategy effectively.",{'ID': '90_UK_DocO_Overheating'},"When a <e1>new</e1> residential building is erected, information about the <e2>building</e2> must be given to the owner of the building to allow them to use the overheating mitigation strategy effectively.",none,annotated
+5577528f-8fa0-4ca3-96f6-ea418091cb86_3,,,The side edges of stairs and landings must be fitted with a raised camber to prevent slipping over the edge if a cube measuring more than <e1>one per 100m2</e1> in <e2>category</e2> is able to pass through the opening between the plane level and the handrail or wall.,greater,synthetic
+b6e6ebce-e75f-4fae-b9a2-e35c164b3fb4,"Where onsite electricity generation and storage is installed, such as photovoltaic panels or battery storage, systems should be an appropriate size for the site, available infrastructure and onsite energy demand.",{'ID': '342_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where onsite electricity generation and storage is installed, such as <e1>photovoltaic panels</e1> or <e2>battery storage</e2>, systems should be an appropriate size for the site, available infrastructure and onsite energy demand.",none,annotated
+26f33f06-e967-4d55-9e73-30990f52ac82,"Loft hatches: where the roof is insulated at ceiling level, hatches should be suitably designed and installed to ensure optimum airtightness.",{'ID': '189_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Loft hatches: where the roof is insulated at ceiling level, <e1>hatches</e1> should be <e2>suitably designed and installed to ensure optimum airtightness</e2>.",necessity,annotated
+74002ed3-548e-4e2f-8835-be76e643c67d_1,,,NOTE 2: Double doors effectively provide nibs where each leaf is at least <e1>eight per cent</e1> <e2>standard thickness</e2>.,greater-equal,synthetic
+7577d9f7-9f3c-4d3b-b8d9-da31d3e1b201,"For example, glare and reflections from shiny surfaces, and large repeating patterns, should be avoided in spaces where visual acuity is critical as they will hamper communication for people with impaired vision, and those who lip read or use sign language.",{'ID': '150_UK_DocM_V2_AccessAndUseOfBuildings'},"For example, glare and reflections from shiny surfaces, and large <e1>repeating</e1> <e2>patterns</e2>, should be avoided in spaces where visual acuity is critical as they will hamper communication for people with impaired vision, and those who lip read or use sign language.",selection,annotated
+73a6e4e0-c157-4cae-bc28-c0788f6a1e53,"Activation (e.g. motion sensors and push buttons), safety features and the time-lapse allowed for entry and exit through powered door systems should be carefully considered to suit the needs of people who cannot react quickly.",{'ID': '73_UK_DocM_V2_AccessAndUseOfBuildings'},"Activation (e.g. motion sensors and push buttons), <e1>safety features</e1> and the time-lapse allowed for <e2>entry</e2> and exit through powered door systems should be carefully considered to suit the needs of people who cannot react quickly.",part-of,annotated
+0aaf71f0-a482-4a72-a407-0d6db79c7f6f,"In a building consisting primarily of one storey, no more than 200 m2 of fire-compartmented and no more than 50 m2 of non-fire-compartmented areas that essentially relate to the business of the building may be located on the level of second storey.",{'ID': '69_Finnish_FireSafety'},"In a building consisting primarily of one storey, no more than 200 m2 of fire-compartmented and no more than 50 m2 of non-fire-compartmented <e1>areas</e1> that <e2>essentially relate to the business of the building</e2> may be located on the level of second storey.",selection,annotated
+208b093d-361f-4aec-819d-4abca4e72c68_8,,,"in an evacuation area where the <e1>steps</e1> is <e2>1.3 seconds</e2>, the second exit may be no less than 900 millimetres in width.",equal,synthetic
+0da52584-1b37-48b5-840f-3795ae695275_4,,,the minimum clear dimensions of the platform are: <e1>adequate number</e1> <e2>frequency</e2> and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+09b2a395-5293-4b7d-82d4-5312482d59e9,"Door entry controls, where provided, are mounted 900-1000mm above finished ground level, and at least 300mm away from any projecting corner.",{'ID': '46_UK_DocM_V1_AccessAndUseOfBuildings'},"<e1>Door entry controls</e1>, where provided, are mounted 900-1000mm <e2>above</e2> finished ground level, and at least 300mm away from any projecting corner.",none,annotated
+ad30824c-74be-4f4f-916a-dfe1e0a89205,"It should be noted that double buggies are wider than wheelchairs and that, where relevant to the building type, this should be borne in mind when determining an appropriate effective clear width for an entrance door.",{'ID': '67_UK_DocM_V2_AccessAndUseOfBuildings'},"It should be noted that double buggies are wider than wheelchairs and that, where relevant to the building type, this should be borne in mind when determining an appropriate effective <e1>clear width</e1> for an <e2>entrance door</e2>.",part-of,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_7,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for <e1>configuration</e1> 1 and <e2>0.7W/(m2K)</e2> if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",equal,synthetic
+3ca5cb38-b90b-4449-ba14-4268866df8e1_5,,,The water heater is close to the draw-off points and has a <e1>fire load</e1> no greater than <e2>65mm</e2>.,less-equal,synthetic
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the <e1>premises</e1> to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. <e2>ventilation unit room</e2>; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",necessity,annotated
+113b8bf8-1856-45f5-a54b-d65ef100b437,"If a gas-fired combination boiler is installed in an existing dwelling, at least one of the following energy efficiency measures, appropriate to the system, should be installed.",{'ID': '262_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If a gas-fired combination boiler is installed in an existing dwelling, at least <e1>one</e1> of the following <e2>energy efficiency measures</e2>, appropriate to the system, should be installed.",greater-equal,annotated
+8efb6108-e49e-4d64-a1e4-22e3f9128b17,"When calculating the reference heat loss of a building, the value of 2.0 m3/(h m2) shall be used as the reference value for the air leakage rate figure for the building envelope.",{'ID': '136_Finnish_EnergyEfficiency'},"When calculating the reference heat loss of a building, the value of <e1>2.0 m3/(h m2)</e1> shall be used as the <e2>reference value</e2> for the air leakage rate figure for the building envelope.",equal,annotated
+b63dcef6-1840-4e9e-ad51-f8fc481fe856,"The wall ties should have a horizontal spacing of 900mm and a vertical spacing of 450mm, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",{'ID': '36_UK_DocA_Structure'},"The wall ties should have a <e1>horizontal spacing</e1> of <e2>900mm</e2> and a vertical spacing of 450mm, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",equal,annotated
+56b0e4bf-81d7-4ab9-855b-780ef2f0b1d3_0,,,Storage premises with a <e1>inaccuracies</e1> exceeding <e2>90mm</e2> are not permitted within the building.,greater,synthetic
+20518e80-6f7e-457f-8c5a-59fa4c0eb324_5,,,"When calculating the heat loss for a buildings design solution, the <e1>performance</e1> shall be used as the value of the <e2>Activation</e2> for the building envelope.",equal,synthetic
+203faa23-7b71-47c9-a6e5-2333ac45389e_6,,,"The riser of the indoor steps of dwelling units and living quarters may be no more than 190 millimetres, and the <e1>depth</e1> must be no less than <e2>220 millimetres</e2>.",greater-equal,synthetic
+5b4380ba-0066-4735-a362-316d4c8e70b2,"Where a building undergoing major renovation, which is not a residential building or a mixeduse building, will have more than 10 parking spaces after the major renovation is completed (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.",{'ID': '73_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where a building undergoing major renovation, which is not a residential building or a mixeduse building, will have more than 10 parking spaces after the major renovation is completed (a) one of those <e1>parking spaces</e1> must have access to one electric vehicle charge point; and (b) <e2>cable routes</e2> for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.",none,annotated
+2fc22f95-5131-40af-8e97-513ecc970217,What constitutes a substantial proportion should be assessed on a case-by-case basis by the building control body.,{'ID': '18_UK_DocL_V1_ConsrvationOfFuelAndPower'},What constitutes a <e1>substantial proportion</e1> should be <e2>assessed on a case-by-case basis by the building control body</e2>.,necessity,annotated
+88e23b46-22d9-4be6-87b7-40541f7995a9_10,,,"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the <e1>results</e1> exceeds <e2>30% load</e2>; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",greater,synthetic
+ef4f54b6-1099-4404-9fa2-d0c0d5e55543_7,,,The <e1>Air flow rates</e1> must not exceed the individual dwellings <e2>Leakage</e2>.,less-equal,synthetic
+302c413e-fefd-47f1-914f-0dc787e4a761_5,,,"Where <e1>level differences</e1> on surfaces is greater than <e2>0.15</e2>, a difference in light reflectance value should be a minimum of 20 points.",greater,synthetic
+8e7e4d9a-05b8-4512-91c5-e8dbb9488685,"At night, windows, patio doors and balcony doors should be modelled as closed.",{'ID': '55_UK_DocO_Overheating'},"<e1>At night</e1>, <e2>windows</e2>, patio doors and balcony doors should be modelled as closed.",selection,annotated
+56b0e4bf-81d7-4ab9-855b-780ef2f0b1d3_1,,,Storage premises with a <e1>control capabilities</e1> exceeding <e2>One</e2> are not permitted within the building.,greater,synthetic
+339fc78c-a2f2-481c-a410-3aeb41e24b8a_0,,,Solid walls constructed of coursed brickwork or blockwork should be at least as <e1>Air permeability</e1> as <e2>1</e2> of the storey height.,greater-equal,synthetic
+ba93ede4-473f-4c07-b439-3699580cbcbe,No individual flight has a rise of more than 1800mm between landings.,{'ID': '21_UK_DocM_V1_AccessAndUseOfBuildings'},No <e1>individual</e1> <e2>flight</e2> has a rise of more than 1800mm between landings.,selection,annotated
+5ca184fa-e100-4f97-957d-e37ae944786f_6,,,The <e1>depth</e1> of installing electric vehicle charge points and cable routes is not more than <e2>four</e2> of the total capital cost of the major renovation.,less-equal,synthetic
+86350df0-a40e-412b-a301-004524d56736,"For wet heating systems in new dwellings with a floor area of 150m2 or greater, a minimum of two independently controlled heating circuits should be provided.",{'ID': '246_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For wet <e1>heating systems</e1> in new dwellings with a floor area of 150m2 or greater, a minimum of <e2>two</e2> independently controlled heating circuits should be provided.",none,annotated
+56517433-cf40-4b88-a9d4-18e61e0e9993_3,,,"In addition, on both sides of the toilet seat there shall be a <e1>terrace of houses</e1> of at least <e2>9 metres</e2>.",greater-equal,synthetic
+06c2e0f7-69c8-47ec-bf31-9902ae9df7cf,"Provision shall be made for any windows, skylights, or any transparent or translucent walls, ceilings or roofs to be safely accessible for cleaning.",{'ID': '109_UK_DocK_ProtectionFromFalling'},"Provision shall be made for any windows, skylights, or any <e1>transparent</e1> or <e2>translucent</e2> walls, ceilings or roofs to be safely accessible for cleaning.",none,annotated
+eefe1191-2903-4fb8-9138-6471e09fb67d_2,,,The <e1>class</e1> exceeds <e2>2.0 m3/(h m2)</e2> at 11pm.,greater,synthetic
+64f259ba-5280-4bf5-bea2-e18cb837a940,A water point shall incorporate a drainage point that is connected to the sewer via a drainage fixture.,{'ID': '124_Finnish_Health-WaterAndSewerage'},A <e1>water point</e1> shall incorporate a drainage point that is <e2>connected to the sewer via a drainage fixture</e2>.,none,annotated
+3835aa39-14bc-4c7a-a029-a5ce391bad76,The efficiency of the secondary heating appliance with its appropriate fuel should be used in the calculation of the dwelling primary energy rate and dwelling emission rate.,{'ID': '73_UK_DocL_V1_ConsrvationOfFuelAndPower'},The efficiency of the secondary <e1>heating appliance</e1> <e2>with its appropriate fuel</e2> should be used in the calculation of the dwelling primary energy rate and dwelling emission rate.,selection,annotated
+5f7b8ff7-50d0-46a2-a48b-fa19786c98fd,"If  the  domestic  hot  water cylinder  is  located  inside  the  building  envelope,  50  of  the  calculated  domestic  hot  water cylinder heat loss shall be added to the thermal load of the spaces of the building.",{'ID': '105_Finnish_EnergyEfficiency'},"If the domestic hot water cylinder is located inside the building envelope, <e1>50</e1> of the calculated <e2>domestic hot water cylinder heat loss</e2> shall be added to the thermal load of the spaces of the building.",part-of,annotated
+88e23b46-22d9-4be6-87b7-40541f7995a9,"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the distance of the uppermost floor level from the entry level exceeds 24 metres; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",{'ID': '254_Finnish_FireSafety'},"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the <e1>premises</e1> above the entry level of the building, when the distance of the uppermost floor level from the entry level exceeds <e2>24 metres</e2>; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",none,annotated
+03bdab65-fc14-4101-add9-f26c25f41e82,A drainage point shall be equipped with a cleansable water seal.,{'ID': '134_Finnish_Health-WaterAndSewerage'},A drainage point shall be equipped with a <e1>cleansable</e1> <e2>water seal</e2>.,selection,annotated
+1320873f-de9b-4c55-a7c0-67f545c4a46e,"All access routes to principal, or alternative accessible, entrances should be surfaced so that people are able to travel along them easily, without excessive effort and without the risk of tripping or falling.",{'ID': '42_UK_DocM_V2_AccessAndUseOfBuildings'},"All access routes to principal, or <e1>alternative accessible</e1>, <e2>entrances</e2> should be surfaced so that people are able to travel along them easily, without excessive effort and without the risk of tripping or falling.",selection,annotated
+7f3f59a4-fc7e-4b14-8074-384f6cacf548_4,,,"The <e1>intended time of use</e1> of a barrier in a dwellings indoor areas may, however, be at least <e2>900-1000mm</e2> if the drop is less than three metres.",greater-equal,synthetic
+c9983da5-23f1-4211-88ce-68e4753e4ab9,"A target primary energy rate, target emission rate, building primary energy rate and the building emission rate should be calculated for non-exempt buildings with low energy demand.",{'ID': '102_UK_DocM_V2_AccessAndUseOfBuildings'},"A target primary energy rate, target emission rate, <e1>building primary energy rate</e1> and the building emission rate should be <e2>calculated for non-exempt buildings with low energy demand</e2>.",necessity,annotated
+51f35d58-c411-4d6d-b36e-9ddf10199908,"Whatever lifting device is chosen, internal stairs should always be provided as an alternative means of vertical access, and designed to suit ambulant disabled people and those with impaired sight.",{'ID': '106_UK_DocM_V2_AccessAndUseOfBuildings'},"Whatever lifting device is chosen, <e1>internal stairs</e1> should <e2>always be provided as an alternative means of vertical access</e2>, and designed to suit ambulant disabled people and those with impaired sight.",necessity,annotated
+46f5be2a-1514-420b-bc39-331fc6e0d2df_6,,,"The <e1>projection</e1>, dwelling emission rate and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the <e2>gradient</e2>, target emission rate and target fabric energy efficiency rate, respectively.",less-equal,synthetic
+973c9430-2b4a-4ab4-82df-7060c3002f77_9,,,The <e1>U-value</e1> for the community heating primary circuit should be a minimum of <e2>1000m2</e2>.,greater-equal,synthetic
+1d18f0c9-31e5-43ee-8f16-e4fa607c5cd9,"The same approved calculation tool must be used to calculate the target primary energy rate, the target emission rate, the building primary energy rate and the building emission rate.",{'ID': '51_UK_DocM_V2_AccessAndUseOfBuildings'},"The same approved calculation tool must be <e1>used to calculate</e1> the target primary energy rate, the <e2>target emission rate</e2>, the building primary energy rate and the building emission rate.",selection,annotated
+b53bb0de-55cd-4505-95a1-cbffd3739047,A commissioning notice must be given to the building control body.,{'ID': '181_UK_DocF_V1_Ventilation'},A <e1>commissioning notice</e1> must be <e2>given to the building control body</e2>.,necessity,annotated
+38cd3221-7fc9-4462-be20-78b16a4309d3_1,,,The <e1>selection</e1> of openings in the newly created dwelling should not be more than <e2>six metres</e2> of the total floor area.,less-equal,synthetic
+9dd2a0f1-0ff9-4416-8abd-1e6589980ff4,"If the cross-sectional area of a mechanical ventilation systems air duct is designed to be greater than 0.06 m2, the outdoor air and exhaust air ducts shall be fitted with shutoff dampers that close automatically when the system shuts down.",{'ID': '100_Finnish_Health-IndoorClimateAndVentilation'},"If the <e1>cross-sectional area</e1> of a mechanical <e2>ventilation systems</e2> air duct is designed to be greater than 0.06 m2, the outdoor air and exhaust air ducts shall be fitted with shutoff dampers that close automatically when the system shuts down.",none,annotated
+a1f91cfd-21f8-49a4-8468-746f49f4848e,"For a building that contains more than one dwelling for example a block of flats or a terrace of houses an average target primary energy rate, target emission rate and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",{'ID': '50_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For a building that contains more than one dwelling for example a block of flats or a terrace of houses an average target primary energy rate, <e1>target emission rate</e1> and target fabric energy efficiency rate may be <e2>calculated as an alternative to individual target rates for each dwelling</e2>.",necessity,annotated
+7d35f4c4-fa65-4d68-a974-f54386ca8aee_7,,,"However, a horizontal <e1>those</e1> in a protective part must be no higher than <e2>21 C</e2>.",less-equal,synthetic
+cc72106e-9e7f-47cf-8a95-0173a8305dad_7,,,"In a new building, the crawl space <e1>size</e1> must be <e2>three seconds</e2> on average at the minimum.",greater-equal,synthetic
+a090f6bb-f89b-44c1-b6ee-8e72e2be30a0,Where a system for on-site electricity generation is installed (a) reasonable provision must be made to ensure that (i) the system and its electrical output are appropriately sized for the site and available infrastructure; (ii) the system has effective controls; and (b) it must be commissioned by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.,{'ID': '370_UK_DocM_V2_AccessAndUseOfBuildings'},Where a system for on-site electricity generation is installed (a) reasonable <e1>provision</e1> must be made to ensure that (i) the system and its electrical output are appropriately sized for the site and available infrastructure; (ii) the system has effective controls; and (b) <e2>it</e2> must be commissioned by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.,selection,annotated
+87c9cfa3-8093-497d-be10-dc054abe7062,"For common leaf lintels, the base plate should not be continuous and the lintel core should be insulated.",{'ID': '164_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For <e1>common</e1> leaf lintels, the base plate should not be continuous and the lintel core should be <e2>insulated</e2>.",none,annotated
+86350df0-a40e-412b-a301-004524d56736_1,,,"For wet heating systems in new dwellings with a <e1>supports</e1> of <e2>0.06 m2</e2> or greater, a minimum of two independently controlled heating circuits should be provided.",greater-equal,synthetic
+2cf150af-bede-4bb6-aa2e-b9f42a109761,The warning should be placed sufficiently in advance of the hazard to allow time to stop and not be so narrow that it might be missed in a single stride.,{'ID': '53_UK_DocM_V2_AccessAndUseOfBuildings'},The <e1>warning</e1> should be <e2>placed sufficiently in advance of the hazard to allow time to stop</e2> and not be so narrow that it might be missed in a single stride.,necessity,annotated
+d3fc8c9b-c23a-4188-8723-369caa90453c_6,,,"The <e1>number of occupants</e1> for a building's total combined window area is <e2>0.055555556</e2> of the sum total of the floor plate areas of the buildings storeys that are fully or in part above the ground but, however, at most 50 of the building's facade area.",equal,synthetic
+09b2a395-5293-4b7d-82d4-5312482d59e9_10,,,"Door entry controls, where provided, are mounted <e1>220 millimetres</e1> <e2>class</e2> finished ground level, and at least 300mm away from any projecting corner.",equal,synthetic
+7a1bc727-1daa-4668-83f6-b44327b96898,"In glazed balconies, the spread of fire from one balcony to another and to an adjacent fire compartment must be restricted.",{'ID': '133_Finnish_FireSafety'},"In glazed balconies, the <e1>spread of fire</e1> <e2>from one balcony to another and to an adjacent fire compartment</e2> must be restricted.",selection,annotated
+74b9ee2c-0192-442d-b5a1-a2974d456429,"The dwelling is wheelchair adaptable such that key parts of the accommodation, including sanitary facilities and kitchens, could be easily altered to meet the needs of a wheelchair user or, where required by a local planning authority, the dwelling is wheelchair accessible.",{'ID': '67_UK_DocM_V1_AccessAndUseOfBuildings'},"The <e1>dwelling</e1> is wheelchair adaptable such that <e2>key parts of the accommodation</e2>, including sanitary facilities and kitchens, could be easily altered to meet the needs of a wheelchair user or, where required by a local planning authority, the dwelling is wheelchair accessible.",part-of,annotated
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab_5,,,"If the <e1>location</e1> of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds <e2>270 millimetres</e2> of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",greater,synthetic
+a86b58e8-046f-44b7-8e1b-00c876c8c647_4,,,"Parapets in <e1>standards</e1> A to <e2>200 lux</e2> and panel parts of walls acting as parapets, as well as their fasteners, shall be designed to the concentrated load Qk = 0.3 kN acting on a random spot.",less-equal,synthetic
+2a256a9c-0b8a-4acf-87e1-86a5857f36a3,"Where a driveway forms all, or part of, the approach route, an additional allowance of at least 900mm wide should be provided so that a wheelchair user can pass a parked car.",{'ID': '17_UK_DocM_V1_AccessAndUseOfBuildings'},"Where a driveway forms all, or part of, the approach route, an additional allowance of at least <e1>900mm</e1> wide should be provided so that a <e2>wheelchair user can pass a parked car</e2>.",none,annotated
+986f7853-4975-4ecd-8f10-a75d818eb44a,"Fully insulated and continuous cavity closers should be used, installed tight to the insulation and cavity apertures.",{'ID': '140_UK_DocL_V1_ConsrvationOfFuelAndPower'},"<e1>Fully insulated</e1> and continuous <e2>cavity closers</e2> should be used, installed tight to the insulation and cavity apertures.",selection,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_9,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for <e1>clear width</e1> 1 and <e2>100 litres</e2> if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",equal,synthetic
+8421f806-70f2-46a9-a308-90a40da3541d_5,,,"Where the <e1>locations</e1> of the approach, whether over its whole length or in part, is <e2>five</e2> or steeper, that part of the approach should be designed as ramped access.",greater-equal,synthetic
+a4dc06ab-99c3-4c8b-b295-eb3e6a64320a_6,,,"The free <e1>air leakage rate figure</e1> from the ground or from the surface of a driveway or walkway of the lower edge of a structural element, device or equipment protruding from the building, such as a balcony, bay window, sign, lighting device or awning, must be at least <e2>400-600mm</e2>, unless the area is protected so as to prevent the danger of collision.",greater-equal,synthetic
+5925ca4d-801c-42e4-b581-a176dea2519f,"If thermal energy is supplied from a district heat network, a CO2 emission factor and primary energy factor for the heat delivered to the dwelling by the district heat network should be calculated.",{'ID': '76_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If thermal energy is supplied from a district heat network, a CO2 emission factor and <e1>primary energy factor</e1> for the heat delivered to the dwelling by the district heat network should be <e2>calculated</e2>.",necessity,annotated
+835d8fad-7a27-4299-aa38-a5b1771a6779_6,,,"In large building complexes, such as retail parks and large sports centres, there should be <e1>0.7 metres</e1> wheelchair-accessible unisex <e2>Gangways</e2> capable of including an adult changing table.",equal,synthetic
+17fba530-c42b-4eeb-85dd-16da0bacc49c,"Areas that are not enclosed, such as open floors, covered ways and balconies, should be excluded.",{'ID': '470_UK_DocL_V1_ConsrvationOfFuelAndPower'},"<e1>Areas</e1> that are not enclosed, such as <e2>open</e2> floors, covered ways and balconies, should be excluded.",none,annotated
+a235c68f-ae44-4770-b005-4e9d7b659eb7_5,,,All cavity walls should have leaves at least 90mm thick and cavities at least <e1>28 metres</e1> <e2>total cost</e2>.,greater-equal,synthetic
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_3,,,"If the air flows of <e1>air flow rate</e1> 1 and <e2>1.3 seconds</e2> are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+e5a56966-e0d8-4d9e-9106-9f63913ca6d0,"Photographs should be taken at appropriate construction stages for each detail when completed, but prior to closingup works.",{'ID': '482_UK_DocL_V1_ConsrvationOfFuelAndPower'},"<e1>Photographs</e1> should be <e2>taken at appropriate construction stages for each detail when completed, but prior to closingup works</e2>.",necessity,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_2,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for <e1>design</e1> 1 and <e2>2.2 metres</e2> if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",equal,synthetic
+3e9fc57e-bc69-4f17-a056-dd7767afa9bb_0,,,"If the <e1>vertical spacing</e1> of the building does not exceed <e2>0.8 metres</e2>, access to the attic fire compartments from the outside shall be required.",less-equal,synthetic
+569c7958-b7d6-4b9c-9dd9-13307e95e59b,"For ducted systems that are served by fans with a design flow rate greater than 1m3/s, ductwork leakage tests should be carried out.",{'ID': '385_UK_DocM_V2_AccessAndUseOfBuildings'},"For <e1>ducted systems</e1> that are served by fans with a <e2>design flow rate</e2> greater than 1m3/s, ductwork leakage tests should be carried out.",part-of,annotated
+20609d43-016e-4314-9620-256f73f1c6ed,"The general ventilation rate for a new conservatory and, if necessary, adjoining rooms could be achieved using background ventilators.",{'ID': '160_UK_DocF_V1_Ventilation'},"The general <e1>ventilation rate</e1> for a new conservatory and, if necessary, <e2>adjoining rooms</e2> could be achieved using background ventilators.",part-of,annotated
+2ca092ec-4425-4552-a389-fd0dadfbd154_0,,,NOTE: A floor level with a <e1>time-lapse</e1> of <e2>28 metres</e2> or steeper should be designed as a ramp.,greater-equal,synthetic
+0f8b3f66-6496-431c-bdc1-75570dde9ee6,"All cable routes should be laid as straight as possible and with suitable access points, so that cables can be pulled through in future.",{'ID': '111_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"All cable routes should be laid as straight as possible and with suitable <e1>access points</e1>, so that <e2>cables</e2> can be pulled through in future.",selection,annotated
+9fd15b82-fc32-4364-8724-f1ef14f0c047_8,,,The cooker hood should <e1>heat emission capacity</e1> at least the <e2>total thickness</e2> of the cooker.,greater-equal,synthetic
+a94b6b4f-a05e-403e-bbca-ebe1b94e38a1,"The area of sloping surfaces such as staircases, galleries, raked auditoria and tiered terraces should be taken as their area on plan.",{'ID': '470_UK_DocM_V2_AccessAndUseOfBuildings'},"The <e1>area</e1> of <e2>sloping surfaces</e2> such as staircases, galleries, raked auditoria and tiered terraces should be taken as their area on plan.",part-of,annotated
+c2e0629d-350b-45b8-9e9e-d58be1780f12_7,,,"If the <e1>kitchen</e1> has no <e2>boiler interlock</e2>, it should be treated as having one bedroom when calculating the ventilation required for the purposes of meeting the ventilation standards.",not-part-of,synthetic
+77be05f2-cd8c-4d35-85e4-6637b999d8e7,The value of the consequential improvement works should not be less than 10 of the value of the principal works.,{'ID': '452_UK_DocM_V2_AccessAndUseOfBuildings'},The <e1>value</e1> of the <e2>consequential</e2> improvement works should not be less than 10 of the value of the principal works.,none,annotated
+2f8d4247-e53b-49ae-bd26-c4f1765eaee8_7,,,"Extract air of <e1>primary energy content</e1> 2, 3 and <e2>450mm</e2> shall not be used as recirculation air.",equal,synthetic
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_4,,,"If the air flows of <e1>maximum number of occupants</e1> 1 and <e2>2.4 metres</e2> are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+40b40b1b-d1b1-49d8-b9b7-13c5845a169d_10,,,The structure of the control appliance of the plumbing fixture shall be such that its <e1>sum total</e1> does not arise above <e2>280mm</e2>.,less-equal,synthetic
+99a53f17-48cb-4012-a47b-700761e0983b_2,,,Where a new building which is not a residential building or a mixed-use building has more than 10 parking spaces (a) <e1>two persons per square metre</e1> of those <e2>bathrooms</e2> must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,equal,synthetic
+60205cf2-fa87-4195-9415-a6fb144a9b72,"Entrances and passageways to playgrounds and recreation areas used in the wintertime, as well as street areas surrounding the building and other public areas, must be protected from snow and ice falling from the roof of the building using snow barriers, taking into account the pitch of the roof.",{'ID': '96_Finnish_SafetyOfUse'},"Entrances and <e1>passageways</e1> to playgrounds and recreation areas <e2>used in the wintertime</e2>, as well as street areas surrounding the building and other public areas, must be protected from snow and ice falling from the roof of the building using snow barriers, taking into account the pitch of the roof.",selection,annotated
+b4cef2a7-038c-4f72-8ea6-20e43d766165,"The building primary energy rate and building emission rate submission should be accompanied by a report, signed by a suitably qualified person, detailing how the CO2 emission factors and primary energy factors have been derived.",{'ID': '70_UK_DocM_V2_AccessAndUseOfBuildings'},"The <e1>building primary energy rate</e1> and building emission rate <e2>submission</e2> should be accompanied by a report, signed by a suitably qualified person, detailing how the CO2 emission factors and primary energy factors have been derived.",part-of,annotated
+7f3f59a4-fc7e-4b14-8074-384f6cacf548,"The height of a barrier in a dwellings indoor areas may, however, be at least 0.9 metres if the drop is less than three metres.",{'ID': '45_Finnish_SafetyOfUse'},"The height of a <e1>barrier</e1> in a dwellings <e2>indoor areas</e2> may, however, be at least 0.9 metres if the drop is less than three metres.",selection,annotated
+981a0996-c526-4ee7-b679-0f17bd5ecd29,"Where it is not feasible to install a space heating system that can operate at this temperature (e.g. where there is insufficient space for larger radiators, or the existing distribution system is provided with higher temperature heat from a low carbon district heat network), the space heating system should be designed to the lowest design temperature possible that will still meet the heating needs of the building.",{'ID': '209_UK_DocM_V2_AccessAndUseOfBuildings'},"Where it is <e1>not feasible to install</e1> a <e2>space heating system</e2> that can operate at this temperature (e.g. where there is insufficient space for larger radiators, or the existing distribution system is provided with higher temperature heat from a low carbon district heat network), the space heating system should be designed to the lowest design temperature possible that will still meet the heating needs of the building.",selection,annotated
+10e66a84-25db-40a0-87d5-6297d0732fe4,The shutoff valves shall be located: 1) at each house; 2) at each apartment; 3) in vertical service pipes; 4) on both sides of devices installed in the service pipes; 5) before a device or fixture that is connected to the connector pipe;  6) on both sides of the water meters.,{'ID': '93_Finnish_Health-WaterAndSewerage'},The <e1>shutoff valves</e1> shall be located: 1) at each house; 2) at each apartment; 3) in vertical service pipes; 4) on both sides of <e2>devices</e2> installed in the service pipes; 5) before a device or fixture that is connected to the connector pipe; 6) on both sides of the water meters.,none,annotated
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_5,,,"In buildings more than 9 metres and at most 28 metres in height, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than <e1>300 millimetres</e1> in <e2>limits</e2>, these must be accessible via the interior.",greater,synthetic
+a9944ed0-7168-4ec7-b761-0641e3e3228b,The sewerage system shall be equipped with cleanouts that are easy to handle and lockable in both horizontal and vertical sewers.,{'ID': '157_Finnish_Health-WaterAndSewerage'},The sewerage system shall be equipped with <e1>cleanouts</e1> that are <e2>easy to handle</e2> and lockable in both horizontal and vertical sewers.,selection,annotated
+45adb0b6-63ee-4f42-b6a3-8fc396221c67_8,,,The <e1>total air flow</e1> of the insulation plus any required air gap should be at least to the <e2>diameter</e2> of the rafters.,greater-equal,synthetic
+72e7ed0c-9e73-46b2-a919-20f3fea337fd_9,,,"An <e1>ducted systems</e1> with a potentially flammable or explosive atmosphere must not be located in a <e2>thermometers</e2> where there are dwellings, accommodation premises, institutions or assembly and business premises.",not-part-of,synthetic
+164122ed-c7ac-4cf8-8a54-3d56c144f78d_2,,,"In general, the findings indicate that there should be at least the same number of <e1>recreation areas</e1> as <e2>induction loop</e2> and for some building types, e.g. large retail buildings, at least twice as many.",greater-equal,synthetic
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3_6,,,"Where the cost of installing only cable routes is more than 7% of the total cost of the major <e1>bathroom</e1>, there is no <e2>Fixings</e2> to install either electric vehicle charge points or cable routes.",not-part-of,synthetic
+5e51b653-449e-4d00-be19-0e20ecff5c49_4,,,The default <e1>use</e1> should be <e2>0.35W/(m2K)</e2>.,equal,synthetic
+8b7e8e7e-81dd-4a76-bdd3-8269ac00f74b,The system can be overridden by a door reactivating device that relies on appropriate electronic methods (but not a door edge pressure system); provided that the lift door remains fully open for at least three seconds.,{'ID': '24_UK_DocM_V1_AccessAndUseOfBuildings'},The <e1>system</e1> can be <e2>overridden by a door reactivating device that relies on appropriate electronic methods (but not a door edge pressure system</e2>); provided that the lift door remains fully open for at least three seconds.,selection,annotated
+eccd4f77-ef4a-41fd-a22a-620c84fdddd4_1,,,There is a minimum of <e1>0.3</e1> of worktop to at least <e2>dwelling primary energy rate</e2> of the oven and fridge or fridge freezer where this is taller than the worktop height (or to one side of a pair of tall appliances where they are located together at the end of a run).,greater-equal,synthetic
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",{'ID': '75_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the <e1>cost</e1> of that <e2>installation</e2> exceeds 7% of the total cost of the major renovation.",part-of,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_8,,,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the <e1>compensating measures</e1> of these must be at least <e2>850-1000mm</e2>.",greater-equal,synthetic
+01d924bf-4a69-4eb8-b05e-ce993aee3d45_7,,,Perimeter insulation should be continuous and have a minimum <e1>layers</e1> of <e2>20mm</e2>.,greater-equal,synthetic
+bb9ec292-062b-43c3-8590-856dd5f6b890,"The building primary energy rate and building emission rate calculated using the measured air permeability must not be higher than the target primary energy rate and target emission rate, respectively.",{'ID': '357_UK_DocM_V2_AccessAndUseOfBuildings'},"The <e1>building primary energy rate</e1> and building emission rate <e2>calculated using the measured air permeability</e2> must not be higher than the target primary energy rate and target emission rate, respectively.",selection,annotated
+b810df40-4dd8-44c4-80c4-b33bb873a5e9,"If  the  circulation  piping  is  located  inside  the  building envelopes insulation, 25 of the calculated domestic hot water circulation heat loss shall be added  to  the  thermal  load  of  the  spaces  of  the  building.",{'ID': '103_Finnish_EnergyEfficiency'},"If the circulation piping is located inside the building envelopes insulation, <e1>25</e1> of the calculated domestic hot water circulation heat loss shall be <e2>added to the thermal load of the spaces of the building</e2>.",necessity,annotated
+746c2a1e-aa29-4913-b431-c415290a9f4b,controls should be inspected to ensure that the following have been achieved.,{'ID': '220_UK_DocF_V1_Ventilation'},<e1>controls</e1> should be <e2>inspected to ensure that the following have been achieved</e2>.,necessity,annotated
+f7cfdf57-28f3-4d23-90bf-ec2268e14bac,"Ramps, steps, thresholds and differences in levels in passageways must be clearly indicated using lighting and surface brightness contrasts or warning signs.",{'ID': '65_Finnish_SafetyOfUse'},"Ramps, steps, <e1>thresholds</e1> and <e2>differences</e2> in levels in passageways must be clearly indicated using lighting and surface brightness contrasts or warning signs.",none,annotated
+d3c5b819-2fd9-461f-b0cc-ac1dd14b45dc,"A sewer installed in the ground shall withstand the load imposed by soil, soil corrosion as well as subsidence of soil.",{'ID': '144_Finnish_Health-WaterAndSewerage'},"A <e1>sewer</e1> <e2>installed in the ground</e2> shall withstand the load imposed by soil, soil corrosion as well as subsidence of soil.",selection,annotated
+05fdde92-d8af-42ad-963b-9019c69a8ab3,"For a timber frame where the intermediate floor structure breaches the external wall insulation, further insulation of the same thickness as the insulation used in the external wall should be included within the depth of the intermediate floor structure.",{'ID': '163_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For a <e1>timber frame</e1> <e2>where the intermediate floor structure breaches the external wall insulation</e2>, further insulation of the same thickness as the insulation used in the external wall should be included within the depth of the intermediate floor structure.",selection,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_9,,,"If the air flows of extract air categories 1 and 2 are combined into the same duct and <e1>intermediate landing</e1> <e2>16/01/2023 00:00</e2> air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+457ecdc0-8247-4ad4-9beb-3b7a31cfa0fd,"All public areas, including lavatory accommodation, public telephones and external terraces should be accessible.",{'ID': '138_UK_DocM_V2_AccessAndUseOfBuildings'},"All public areas, including <e1>lavatory</e1> accommodation, public telephones and external terraces should be <e2>accessible</e2>.",none,annotated
+c384013b-c40f-4925-acbe-465e1ca5bc13_8,,,<e1>20 litres per second</e1> <e2>sunken</e2> per detail should be recorded.,equal,synthetic
+4e4fdf56-c45b-4d89-b18f-7a2f24a41ba9,"In spaces intended for more than 60 persons, the width of the access route must be at least 1,200 millimetres.",{'ID': '116_Finnish_SafetyOfUse'},"In <e1>spaces</e1> intended for more than 60 persons, the width of the <e2>access route</e2> must be at least 1,200 millimetres.",part-of,annotated
+525aa713-65e1-4368-a6f4-38f628be7fed,"in clothes shops, the dimensions and fittings recommended for an individual changing cubicle in a sports building should be provided.",{'ID': '177_UK_DocM_V2_AccessAndUseOfBuildings'},"in clothes shops, the <e1>dimensions</e1> and fittings recommended for an individual changing cubicle in a sports <e2>building</e2> should be provided.",necessity,annotated
+5e51b653-449e-4d00-be19-0e20ecff5c49_5,,,The default <e1>Level differences</e1> should be <e2>15</e2>.,equal,synthetic
+12e545d1-64f4-45c9-a520-5b8a003eba0a_10,,,"If the dwelling has more than <e1>1,500 millimetres</e1> exposed <e2>cavity closers</e2>, the area of background ventilators on each facade should be similar, to allow cross-ventilation.",greater,synthetic
+4f2b56cb-9852-4406-bbea-31f426fb4910,"replacing a heating system including the heating appliance, pipework and heat emitters), the energy performance of the whole system should be assessed, and the results documented and handed over to the building owner with the manufacturers supporting literature.",{'ID': '397_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>replacing</e1> a <e2>heating system</e2> including the heating appliance, pipework and heat emitters), the energy performance of the whole system should be assessed, and the results documented and handed over to the building owner with the manufacturers supporting literature.",selection,annotated
+164122ed-c7ac-4cf8-8a54-3d56c144f78d_11,,,"In general, the findings indicate that there should be at least the same number of <e1>Their</e1> as <e2>fittings</e2> and for some building types, e.g. large retail buildings, at least twice as many.",greater-equal,synthetic
+cf35d4a4-3170-421b-9be1-b68d928eed1d,"A roof with a pitch greater than 1:8 must be constructed making appropriate use of walkways, roof ladders, safety ladders, roof stairs, roof treads and foot rails.",{'ID': '125_Finnish_SafetyOfUse'},"A <e1>roof</e1> with a pitch greater than 1:8 must be <e2>constructed making appropriate use of walkways, roof ladders, safety ladders, roof stairs, roof treads and foot rails</e2>.",necessity,annotated
+45adb0b6-63ee-4f42-b6a3-8fc396221c67,The depth of the insulation plus any required air gap should be at least to the depth of the rafters.,{'ID': '128_UK_DocL_V1_ConsrvationOfFuelAndPower'},The depth of the insulation plus any required air gap should be at least to the <e1>depth</e1> of the <e2>rafters</e2>.,part-of,annotated
+45b99da0-5bce-49b7-9ce2-04810c7e5a19,"For recessed meter boxes on the cold side of the construction, insulation should be installed behind the enclosure.",{'ID': '151_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For recessed <e1>meter boxes</e1> on the <e2>cold side</e2> of the construction, insulation should be installed behind the enclosure.",part-of,annotated
+94c0e823-a61d-49d6-82b3-4ca96f65dfa4,The buildings surfaces and lighting must be such that they achieve the contrasts in brightness needed for observation.,{'ID': '64_Finnish_SafetyOfUse'},The <e1>buildings </e1><e2>surfaces</e2> and lighting must be such that they achieve the contrasts in brightness needed for observation.,part-of,annotated
+8151be81-09ad-4dac-b2d2-f0d757915b6c,"However, when the snow load can occur, the minimum value of the load s should be at least 0.5 kN/m2.",{'ID': '110_Finnish_StabilityOfStructures'},"However, when the snow load can occur, the <e1>minimum value</e1> of the <e2>load</e2> s should be at least 0.5 kN/m2.",part-of,annotated
+67657794-a272-4ab2-9b19-df29e9d24844,Ground floors and external walls: the wall-to-floor junctions should be detailed to achieve continuity of insulation.,{'ID': '160_UK_DocL_V1_ConsrvationOfFuelAndPower'},Ground floors and external <e1>walls</e1>: the <e2>wall-to-floor junctions</e2> should be detailed to achieve continuity of insulation.,part-of,annotated
+d5cb0429-ffef-43c5-9789-a3611c04446a,"The supports and fastening points of water pipes shall be such that neither heat expansion nor forces generated by water flow cause the pipes to shift, loosen, break or make disturbing noises.",{'ID': '89_Finnish_Health-WaterAndSewerage'},"The supports and <e1>fastening points</e1> of water pipes shall be such that <e2>neither heat expansion nor forces generated by water flow cause the pipes to shift, loosen, break or make disturbing noises</e2>.",necessity,annotated
+ebc429f0-cb90-41ab-9a11-401a2ddc7bad,"For continuous mechanical ventilation systems, such as continuous mechanical extract ventilation or mechanical ventilation with heat recovery, the system should be balanced to achieve design air flow rates at each room terminal.",{'ID': '268_UK_DocF_V1_Ventilation'},"For continuous mechanical ventilation systems, such as continuous mechanical extract ventilation or mechanical ventilation with <e1>heat recovery</e1>, the <e2>system</e2> should be balanced to achieve design air flow rates at each room terminal.",none,annotated
+aec934d9-6175-4624-9e8d-1ee6f71fb49d,Sufficient information about the overheating mitigation strategy and its maintenance requirements must be given to owners so that it can be used effectively.,{'ID': '92_UK_DocO_Overheating'},Sufficient <e1>information</e1> about the overheating mitigation strategy and its maintenance requirements must be <e2>given to owners so that it can be used effectively</e2>.,necessity,annotated
+5869233a-4fc0-48bf-9007-2b0c9a169fef,"A building shall, if its size, number of storeys or an intended purpose of a premises within the building so requires, be divided into fire compartments in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",{'ID': '100_Finnish_FireSafety'},"A building shall, if its size, number of storeys or an intended purpose of a <e1>premises</e1> within the <e2>building</e2> so requires, be divided into fire compartments in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",part-of,annotated
+e3b85ad6-6132-40d7-86f8-3cc5d44eb12c_10,,,<e1>six metres</e1> <e2>lifting platform</e2> should be close to an accessible bathroom suitable for a wheelchair user.,equal,synthetic
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_9,,,Skirtings totalling up to 50mm total thickness and shallow projecting <e1>shower</e1> or casings above <e2>1m2</e2> may be discounted when measuring clear width.,greater,synthetic
+53bb982d-5260-4a69-a6dd-71e4f074e676_0,,,The <e1>boiler type</e1> of standing rows must be at least <e2>EI 30</e2>.,greater-equal,synthetic
+bd033057-ac6c-45bb-92c7-ca58bf22dab1,The lobby should be large enough and of a shape to allow a wheelchair user or a person pushing a pram to move clear of one door before opening the second door.,{'ID': '80_UK_DocM_V2_AccessAndUseOfBuildings'},The <e1>lobby</e1> should be large enough and of a <e2>shape</e2> to allow a wheelchair user or a person pushing a pram to move clear of one door before opening the second door.,part-of,annotated
+d728a9c8-0302-4bd1-b69b-0daeefce30d1,"Where a service building has a reception or sales counter, there should be convenient access to it and part of it should be at a level suitable for a wheelchair user or a seated person.",{'ID': '84_UK_DocM_V2_AccessAndUseOfBuildings'},"Where a <e1>service building</e1> has a reception or sales counter, there should be convenient access to it and part of <e2>it</e2> should be at a level suitable for a wheelchair user or a seated person.",none,annotated
+7f49ccb1-ce2c-47eb-8b22-2c8e806e5d88,The resilient layer should be to the full height of the door and 600mm either side of the doorset.,{'ID': '15_UK_DocQ_Security_Dwellings'},The <e1>resilient layer</e1> should be to the full height of the door and 600mm <e2>either side</e2> of the doorset.,necessity,annotated
+bb9ec292-062b-43c3-8590-856dd5f6b890_9,,,"The <e1>annual percentage of heat</e1> and building emission rate calculated using the measured air permeability must not be higher than the <e2>total thickness</e2> and target emission rate, respectively.",less-equal,synthetic
+01008f69-874b-443e-bcb2-2f5630280049_2,,,"If stairs are used only as an emergency exit and if they lead to spaces in a dwelling or accommodation facility other than those that are necessary for living, the <e1>parasitic energy use</e1> may be no more than <e2>500kW</e2> and the tread must be no less than 220 millimetres.",less-equal,synthetic
+e15250c0-1279-4d29-a1ec-31560b045007_2,,,<e1>ventilation equipment</e1> of basement storeys must not be connected to fire and smoke-proof <e2>bath</e2>.,not-part-of,synthetic
+23cff3c3-1251-4c5f-9fd9-8f52d25eb494_9,,,Gasfired boilers and multi-stage oilfired boilers with an <e1>Moisture</e1> of more than <e2>600 millimetres</e2> should have fully modulating burner controls.,greater,synthetic
+a94b6b4f-a05e-403e-bbca-ebe1b94e38a1,"The area of sloping surfaces such as staircases, galleries, raked auditoria and tiered terraces should be taken as their area on plan.",{'ID': '470_UK_DocM_V2_AccessAndUseOfBuildings'},"The area of <e1>sloping surfaces</e1> such as staircases, galleries, raked auditoria and tiered terraces should be <e2>taken as their area on plan</e2>.",none,annotated
+fb1da22f-8ddb-4399-b441-64dca68da9af,"If a lift or other device for moving between levels is installed in the exit of an existing building, the dwellings exit may be no less than 850 millimetres wide.",{'ID': '218_Finnish_FireSafety'},"If a lift or other device for moving between levels is installed in the exit of an existing building, the dwellings <e1>exit</e1> may be no less than 850 millimetres <e2>wide</e2>.",part-of,annotated
+2c725d50-13d5-4e77-bacf-9f174530e27c,The energy efficiency of historic and traditional buildings should be improved only if doing so will not cause long-term deterioration of the buildings fabric or fittings.,{'ID': '17_UK_DocM_V2_AccessAndUseOfBuildings'},The <e1>energy efficiency</e1> of historic and traditional <e2>buildings</e2> should be improved only if doing so will not cause long-term deterioration of the buildings fabric or fittings.,part-of,annotated
+511c1a7f-08b9-48ec-aea6-9b749fdf31a1_3,,,"A non-residential building shall, considering the intended use and functional units of the building and distances in the building, have an <e1>4</e1> of appropriately located <e2>future connection</e2> which are suitable for users of wheelchairs and walking frames with wheels.",equal,synthetic
+e4fb8d18-8dbc-4351-a2df-d87f880f476a,The fire resistance time requirement for balconies is half that of the load-bearing structures of the storey.,{'ID': '90_Finnish_FireSafety'},The fire resistance time requirement for balconies is <e1>half</e1> that of the <e2>load-bearing structures</e2> of the storey.,part-of,annotated
+08efb7a8-1f9e-491b-8a6f-7043ec96ea3b,The methodology for determining costs should be consistent between all elements of the calculation to allow a fair comparison between the cost of the major renovation and the cost of electric vehicle charge point infrastructure.,{'ID': '54_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},The <e1>methodology</e1> for determining costs should be <e2>consistent between all elements of the calculation to allow a fair comparison between the cost of the major renovation and the cost of electric vehicle charge point infrastructure</e2>.,necessity,annotated
+4f2b56cb-9852-4406-bbea-31f426fb4910,"replacing a heating system including the heating appliance, pipework and heat emitters), the energy performance of the whole system should be assessed, and the results documented and handed over to the building owner with the manufacturers supporting literature.",{'ID': '397_UK_DocM_V2_AccessAndUseOfBuildings'},"replacing a <e1>heating system</e1> including the heating appliance, pipework and <e2>heat emitters</e2>), the energy performance of the whole system should be assessed, and the results documented and handed over to the building owner with the manufacturers supporting literature.",selection,annotated
+c9983da5-23f1-4211-88ce-68e4753e4ab9,"A target primary energy rate, target emission rate, building primary energy rate and the building emission rate should be calculated for non-exempt buildings with low energy demand.",{'ID': '102_UK_DocM_V2_AccessAndUseOfBuildings'},"A target primary energy rate, <e1>target emission rate</e1>, <e2>building primary energy rate</e2> and the building emission rate should be calculated for non-exempt buildings with low energy demand.",none,annotated
+f398541a-81df-4380-a408-d7b1beaa7c92,"People should be able to see other people approaching from the opposite direction, thereby allowing sufficient reaction time for both parties to avoid a collision.",{'ID': '68_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>People</e1> should be able to <e2>see other people approaching from the opposite direction</e2>, thereby allowing sufficient reaction time for both parties to avoid a collision.",necessity,annotated
+f36650d9-cd31-4795-9728-7a4dcf3cadde,"Dwellings, accommodation premises, institutions, day-care institutions, day-care centres and other early childhood education premises and schools must be provided with an appropriate system that gives a warning at an early stage of a beginning fire.",{'ID': '229_Finnish_FireSafety'},"Dwellings, accommodation premises, institutions, day-care institutions, day-care centres and other <e1>early childhood education premises</e1> and schools must be provided with an appropriate <e2>system that gives a warning at an early stage of a beginning fire</e2>.",necessity,annotated
+c8a048c6-8e7e-4b5a-ada5-02990b983401,"A natural ventilation system, a mechanical extract ventilation system or a mechanical supply and extract ventilation system shall not be designed to be combined in such a way that the directions of air flow between the rooms and in the ductworks may change when the air flows are being controlled.",{'ID': '91_Finnish_Health-IndoorClimateAndVentilation'},"A <e1>natural</e1> <e2>ventilation system</e2>, a mechanical extract ventilation system or a mechanical supply and extract ventilation system shall not be designed to be combined in such a way that the directions of air flow between the rooms and in the ductworks may change when the air flows are being controlled.",selection,annotated
+23db27ac-b594-4b26-883d-922d713d382a,"When installing or renovating thermal elements, the element being installed should be draught-proofed and airleakage gaps should be filled.",{'ID': '161_UK_DocM_V2_AccessAndUseOfBuildings'},"When installing or renovating thermal elements, the <e1>element</e1> being installed should be draught-proofed and airleakage gaps should be <e2>filled</e2>.",none,annotated
+5b1fe636-d2aa-4382-885e-a4f8a2cae4d4_10,,,"Generally, a thermal element once upgraded should not have a <e1>Ventilation</e1> greater than <e2>2.2 metres</e2>.",less-equal,synthetic
+75c60084-6878-472d-8694-e8739e0dd76c,The width of access routes in assembly areas with a maximum capacity of 60 persons must be at least 900 millimetres.,{'ID': '115_Finnish_SafetyOfUse'},The width of access routes in assembly areas with a <e1>maximum capacity</e1> of <e2>60 persons</e2> must be at least 900 millimetres.,equal,annotated
+a0c838b5-5fe2-4b52-abe1-432804c2c8aa_8,,,A <e1>construction</e1> of 21 C shall be used as the <e2>emission rate</e2> for room temperature during the heating season.,equal,synthetic
+3ac96918-764f-403d-a588-37b5f4a16f46,"For absorption chillers used in conjunction with onsite CHP or a district heat network or community heating system, the CO2 emissions and primary energy should be calculated in the same way as when using CHP for heating.",{'ID': '284_UK_DocM_V2_AccessAndUseOfBuildings'},"For absorption chillers used in conjunction with onsite CHP or a district heat network or community heating system, the <e1>CO2 emissions</e1> and primary energy should be <e2>calculated in the same way as when using CHP for heating</e2>.",necessity,annotated
+baee716c-b8c2-4500-b4de-63fa11f007b1_8,,,A minimum of one in <e1>300 millimetres</e1> of the remaining <e2>Routes</e2> must have access to cable routes.,equal,synthetic
+b0e99ac5-9cbc-4beb-b8ff-85383ae70ea8,"The approach route should be safe and convenient, adopt the shallowest gradient that can reasonably be achieved and be step-free, irrespective of the storey on which the dwelling is located.",{'ID': '40_UK_DocM_V1_AccessAndUseOfBuildings'},"The approach route should be safe and <e1>convenient</e1>, adopt the shallowest gradient that can reasonably be achieved and be <e2>step-free</e2>, irrespective of the storey on which the dwelling is located.",none,annotated
+f7935bb4-9e5f-4e91-bbf1-54e45c1ef24c_4,,,A building with a <e1>difference in light reflectance value</e1> exceeding <e2>three metres</e2> must be equipped with anchoring structures for safety lines.,greater,synthetic
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_6,,,Skirtings totalling up to <e1>450mm</e1> <e2>Ventilation</e2> and shallow projecting ducts or casings above 1800mm may be discounted when measuring clear width.,less-equal,synthetic
+0a7ff0c7-c5f9-4069-9d7e-2bfd6c4871d3_6,,,The <e1>energy efficiency measures</e1> of the extension does not exceed <e2>two years</e2>.,less-equal,synthetic
+2f815a08-db3c-48a6-b248-d69aeac870ee_7,,,"the vertical <e1>total cost</e1> is: a. not more than <e2>1.3 seconds</e2>, where there is no liftway enclosure and no floor penetration; b. more than 2m, where there is a liftway enclosure.",less-equal,synthetic
+6e49e97f-54f6-4333-9b1e-84373a7defe8,The protective part of the barrier must extend to a height of at least 0.7 metres from the surface of the landing or step.,{'ID': '40_Finnish_SafetyOfUse'},The <e1>protective part</e1> of the <e2>barrier</e2> must extend to a height of at least 0.7 metres from the surface of the landing or step.,part-of,annotated
+bde1697a-20c9-4f15-a63c-5be323a058c1_4,,,"Any connection of <e1>600kg/m3</e1> or more <e2>Windows, skylights and ventilators</e2> to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.",greater-equal,synthetic
+cccbc1ea-27be-4d7b-b53c-3cb467a51020,"For heating and cooling systems in a new non-domestic building, or when a heat generator such as a boiler is replaced in an existing non-domestic building, each room should be provided with thermostatic room controls.",{'ID': '220_UK_DocM_V2_AccessAndUseOfBuildings'},"For heating and cooling systems in a new <e1>non-domestic building</e1>, or when a heat generator such as a boiler is replaced in an existing non-domestic building, each <e2>room</e2> should be provided with thermostatic room controls.",part-of,annotated
+8aa4b706-1659-4e30-a4fe-e7f33efe3241_8,,,All <e1>120</e1> <e2>expanded metal</e2> of the compliance checklist should be completed.,equal,synthetic
+7602a501-a5b5-429c-99e1-8bc801243494,"The flooring and wall covering must provide waterproofing, or separate waterproofing must be installed under the flooring and behind the wall covering.",{'ID': '111_Finnish_Health-Humidity'},"The flooring and <e1>wall covering</e1> must <e2>provide waterproofing</e2>, or separate waterproofing must be installed under the flooring and behind the wall covering.",necessity,annotated
+5fa7daca-cb50-4397-a736-617e52d30187_3,,,"If efficiencies at below 30% are required and unavailable, the <e1>inner surfaces</e1> may be taken as equal to that at <e2>1000m2</e2>.",equal,synthetic
+3c28dbd6-8a3d-4ede-ae08-89e4b5d69d60,The approach route is a minimum of 900mm wide with a maximum cross fall of 1 in 40.,{'ID': '16_UK_DocM_V1_AccessAndUseOfBuildings'},The <e1>approach route</e1> is a minimum of 900mm wide with a maximum <e2>cross fall</e2> of 1 in 40.,part-of,annotated
+8bb9aee2-a950-4a65-a715-287035906789,"Spaces of a non-residential building and common spaces of a residential building as well as the fixtures, fittings and fixed equipment in them shall be suitable for persons with mobility and functional impairment.",{'ID': '27_Finnish_Accessibility'},"<e1>Spaces</e1> of a <e2>non-residential building</e2> and common spaces of a residential building as well as the fixtures, fittings and fixed equipment in them shall be suitable for persons with mobility and functional impairment.",part-of,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_3,,,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and <e1>120</e1> in <e2>projection</e2>; however, the sum of these must be at least 1,500 millimetres.",greater-equal,synthetic
+973c9430-2b4a-4ab4-82df-7060c3002f77,The design temperature difference for the community heating primary circuit should be a minimum of 20C.,{'ID': '292_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>design temperature difference</e1> for the <e2>community heating primary circuit</e2> should be a minimum of 20C.,part-of,annotated
+caa5332f-5180-4d07-a41f-e6e0e044a8c1,An existing district heat network that is being connected to a new dwelling should not have a CO2 emission factor for delivered heat to the dwelling which is greater than 0.350kgCO2/kWh.,{'ID': '287_UK_DocL_V1_ConsrvationOfFuelAndPower'},An <e1>existing</e1> <e2>district heat network</e2> that is being connected to a new dwelling should not have a CO2 emission factor for delivered heat to the dwelling which is greater than 0.350kgCO2/kWh.,selection,annotated
+16f6f10e-f32f-48b2-85f9-123cdb5448ee,Any unavoidable gaps between boards should be infilled using compressible tape (e.g. for boards within roof rafters) or low expansion foam (e.g. for boards within wall cavities).,{'ID': '147_UK_DocL_V1_ConsrvationOfFuelAndPower'},Any unavoidable gaps between boards should be <e1>infilled</e1> using <e2>compressible tape</e2> (e.g. for boards within roof rafters) or low expansion foam (e.g. for boards within wall cavities).,selection,annotated
+e4fb8d18-8dbc-4351-a2df-d87f880f476a_2,,,The <e1>alongside the leading edge</e1> for balconies is <e2>10 litres per second per person</e2> that of the load-bearing structures of the storey.,equal,synthetic
+ae21bd5a-7374-43ad-900e-e2e1a6459cb0,"The target primary energy rate and target emission rate must be calculated using one of the calculation tools in the approved methodology, used in line with the version policy as stated in the methodology.",{'ID': '49_UK_DocM_V2_AccessAndUseOfBuildings'},"The target primary energy rate and <e1>target emission rate</e1> must be <e2>calculated using one of the calculation tools in the approved methodology, used in line with the version policy as stated in the methodology</e2>.",necessity,annotated
+4abb3268-3ba6-47e8-a8b7-4676dbaa9a16,"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide all means of escape routes with a minimum clear headroom of 2m, except in doorways.",{'ID': '28_UK_DocK_ProtectionFromFalling'},"For buildings other than dwellings and for common access areas in <e1>buildings</e1> that contain flats, Provide all means of escape routes with a minimum clear headroom of <e2>2m</e2>, except in doorways.",none,annotated
+d342429e-d3fc-46e0-a195-527cfef1fd4b,"When an existing building with a total useful floor area of over 1000m2 is being extended or the habitable area is being increased, consequential improvements should be installed.",{'ID': '451_UK_DocM_V2_AccessAndUseOfBuildings'},"When an existing building with a total useful floor area of over <e1>1000m2</e1> is <e2>being extended</e2> or the habitable area is being increased, consequential improvements should be installed.",selection,annotated
+f009a781-0ced-408d-b3d1-6ae7a848012e,"The landings in the indoor and outdoor areas of a building must be safe, sufficiently spacious and suitable for their purpose.",{'ID': '31_Finnish_SafetyOfUse'},"The landings in the indoor and outdoor <e1>areas</e1> of a <e2>building</e2> must be safe, sufficiently spacious and suitable for their purpose.",part-of,annotated
+4fc3b5b1-a838-4429-b385-d8e80e6633eb_5,,,"In the absence of relevant harmonised European Standards, products with a <e1>part</e1> exceeding <e2>two persons per square metre</e2> must have a product certificate issued by a Notified Body.",greater,synthetic
+2f89cb06-3ee9-49b5-ac36-46f31ae3928f,Hot water pipework should be insulated in all areas inside and outside the building unless it can be demonstrated that the heat is always useful.,{'ID': '170_UK_DocM_V2_AccessAndUseOfBuildings'},Hot water pipework should be <e1>insulated</e1> in all areas inside and outside the building unless it can be demonstrated that the heat is <e2>always useful</e2>.,none,annotated
+3f7c10d1-d801-4351-bc85-187cf8cffeb3,The water vapour resistance and air tightness of external walls and their various layers as well as the structures attached to the external wall and joints to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,{'ID': '96_Finnish_Health-Humidity'},The water vapour resistance and <e1>air tightness</e1> of external walls and their various layers as well as the structures attached to the external wall and <e2>joints</e2> to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,part-of,annotated
+50e89a86-e2be-439d-b230-79274cd7199b_5,,,Modular and portable buildings with a planned <e1>level difference</e1> of more than <e2>0.7 metres</e2> at a single location should be shown to comply with the energy efficiency requirements.,greater,synthetic
+f9de28ac-45bb-4400-9d9f-8afee73bd2e3_1,,,The <e1>absence</e1> should not exceed <e2>35 mg/m3 (30 ppm)</e2> of dwelling floor area.,less-equal,synthetic
+2f8d4247-e53b-49ae-bd26-c4f1765eaee8_9,,,"Extract air of <e1>heat</e1> 2, 3 and <e2>900 millimetres</e2> shall not be used as recirculation air.",equal,synthetic
+419892bb-5044-4c63-a8ba-7747ad52c23d,"When installing windows, roof windows, rooflights or doors (all of which are controlled fittings), the controlled fitting should be well fitted and reasonably draught-proof.",{'ID': '195_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When installing windows, roof windows, rooflights or <e1>doors</e1> (all of which are controlled fittings), the <e2>controlled fitting</e2> should be well fitted and reasonably draught-proof.",none,annotated
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the <e1>premises</e1> to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. <e2>car wash facility</e2>; 8. special facilities cleansed by water rinsing.",necessity,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_5,,,"If the air flows of <e1>fire load</e1> <e2>24 degrees Celsius</e2> and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+959b4ba1-2cf2-4ae9-84d4-055e9c0040f1,The inaccuracies of the crane wheels should be determined together with the crane supplier.,{'ID': '229_Finnish_StabilityOfStructures'},The <e1>inaccuracies</e1> of the crane wheels should be <e2>determined together with the crane supplier</e2>.,necessity,annotated
+ec419055-6ed3-4dac-9879-748e2d365a26,"Internal building services: where services penetrate the air barrier, holes should be as small as possible and should be core drilled to limit damage.",{'ID': '180_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Internal building services: where services penetrate the air barrier, <e1>holes</e1> should be as <e2>small as possible</e2> and should be core drilled to limit damage.",necessity,annotated
+1603fe12-9df6-4ab9-acbe-44895cccb7ed,Any looped cords must be fitted with child safety devices.,{'ID': '87_UK_DocO_Overheating'},Any <e1>looped</e1> <e2>cords</e2> must be fitted with child safety devices.,selection,annotated
+793cb939-b3d9-46eb-ae65-71a4d5c8031b_6,,,Where the <e1>vehicle barriers</e1> is within the private curtilage of the dwelling (but not within a carport or <e2>lift door</e2>) at least one space is a standard parking bay that can be widened to 3.3m.,not-part-of,synthetic
+46f5be2a-1514-420b-bc39-331fc6e0d2df_1,,,"The <e1>Moisture</e1>, dwelling emission rate and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the <e2>design value</e2>, target emission rate and target fabric energy efficiency rate, respectively.",less-equal,synthetic
+716fa732-f3c7-43ad-a4e3-fff43a841018,The vehicle traffic area of a building and its courtyard must be safe and appropriate.,{'ID': '131_Finnish_SafetyOfUse'},The vehicle traffic area of a building and <e1>its</e1> <e2>courtyard</e2> must be safe and appropriate.,part-of,annotated
+ddcf66e5-33c1-43c6-9c16-52be70d56c54,"If an exhaust air terminal is located on a facade that is exposed to the prevailing wind, measures should be taken to minimise likely wind effects.",{'ID': '100_UK_DocF_V1_Ventilation'},"If an <e1>exhaust air terminal</e1> is <e2>located on a facade that is exposed to the prevailing wind</e2>, measures should be taken to minimise likely wind effects.",selection,annotated
+ee0c8c7c-c65e-4403-92e6-628fd680f3bf,Any panel within the doorset should be at least 15mm thick.,{'ID': '30_UK_DocQ_Security_Dwellings'},Any <e1>panel</e1> within the doorset should be at least 15mm <e2>thick</e2>.,part-of,annotated
+a922fe4e-30c9-4fef-a442-27459b959914,Vertical service pipes shall be equipped with mechanical or structural leak detectors at each floor if the service pipes are not visible.,{'ID': '82_Finnish_Health-WaterAndSewerage'},Vertical <e1>service pipes</e1> shall be equipped with mechanical or structural <e2>leak detectors</e2> at each floor if the service pipes are not visible.,necessity,annotated
+6465e5b9-4c10-41ec-9839-3e7cb7114911,Programmable room thermostats with an override feature should be provided for all direct electric zones of the electric underfloor heating system.,{'ID': '314_UK_DocL_V1_ConsrvationOfFuelAndPower'},Programmable <e1>room thermostats</e1> with an override feature should be <e2>provided for all direct electric zones of the electric underfloor heating system</e2>.,necessity,annotated
+f3bd99b4-7ea5-4968-af10-3c133c0b5aa0_2,,,No individual flight has a <e1>maintained</e1> of more than <e2>0.15 dm3/s per m2</e2>.,less-equal,synthetic
+d54852df-8e3c-4e99-8484-31c403b78558,"If work is carried out on a system that includes a boiler, a boiler interlock should be installed.",{'ID': '256_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If work is carried out on a <e1>system</e1> that includes a boiler, a <e2>boiler interlock</e2> should be installed.",none,annotated
+385a4365-40c0-4c07-8854-b07bde292fd2,"The  electrical  energy  consumption  of  a  mechanical ventilation  system  shall  be  calculated  on  the  basis  of  air  flows,  specific  fan  powers  and operating times for all air handling units and powered roof ventilators in the building.",{'ID': '109_Finnish_EnergyEfficiency'},"The electrical energy consumption of a <e1>mechanical</e1> <e2>ventilation system</e2> shall be calculated on the basis of air flows, specific fan powers and operating times for all air handling units and powered roof ventilators in the building.",selection,annotated
+63af9f99-6939-4e8c-a6a9-8b10942e1597_7,,,"The handle to at least <e1>5m</e1> <e2>dwellings</e2> in the principal living area is located between 450mm and 1200mm above floor level, unless the window is fitted with a remote opening device that is within this height range.",greater-equal,synthetic
+98ef7ffc-fba9-439f-ab36-5fd6fd1d8e0f,Complex details should be avoided wherever possible.,{'ID': '154_UK_DocL_V1_ConsrvationOfFuelAndPower'},Complex <e1>details</e1> should be <e2>avoided wherever possible</e2>.,necessity,annotated
+88e23b46-22d9-4be6-87b7-40541f7995a9_8,,,"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the <e1>emission rate</e1> exceeds <e2>off</e2>; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",greater,synthetic
+66249fda-33bf-4d93-8bf9-53fb82ad0e95,"The driveway and parking area at a plot or building site must be separated from pedestrian, play and recreation areas.",{'ID': '87_Finnish_SafetyOfUse'},"The driveway and <e1>parking area</e1> at a plot or <e2>building site</e2> must be separated from pedestrian, play and recreation areas.",part-of,annotated
+536b172d-ccd1-479a-8136-6ee05db0f264,"Where pipework is above ground, the performance of the pipe insulation should be at least as high as the insulating performance of pipework in the buried part of the system.",{'ID': '205_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where pipework is above ground, the <e1>performance</e1> of the pipe insulation should be at least as high as the insulating performance of <e2>pipework</e2> in the buried part of the system.",none,annotated
+56b0e4bf-81d7-4ab9-855b-780ef2f0b1d3_3,,,Storage premises with a <e1>area</e1> exceeding <e2>900mm</e2> are not permitted within the building.,greater,synthetic
+8aa4b706-1659-4e30-a4fe-e7f33efe3241_1,,,All <e1>1m2</e1> <e2>Solid walls</e2> of the compliance checklist should be completed.,equal,synthetic
+aef92227-4c01-4c59-b96d-ce414540606b,"Appliances capable of burning both biomass fuel and fossil fuel the CO2 emission factor and primary energy factor for dua-lfuel appliances should be used, except where the building is in a smoke control area, when the anthracite figure should be used.",{'ID': '63_UK_DocM_V2_AccessAndUseOfBuildings'},"Appliances capable of burning both biomass fuel and fossil fuel the CO2 emission factor and <e1>primary energy factor</e1> <e2>for dua-lfuel appliances</e2> should be used, except where the building is in a smoke control area, when the anthracite figure should be used.",selection,annotated
+e7be7432-5505-47ad-b586-2a2e3f5a1a37,"If the index terminal has to be set to a significantly closed position to achieve the required air flow rate, then the fan speed should be reduced and the terminals rebalanced.",{'ID': '203_UK_DocF_V1_Ventilation'},"If the <e1>index terminal</e1> has to be <e2>set to a significantly closed position to achieve the required air flow rate</e2>, then the fan speed should be reduced and the terminals rebalanced.",selection,annotated
+7c44934c-61e1-4904-a493-1aa360ccc7d1,"The building shall be constructed so that the combined dead,imposed and wind loads are sustained and transmitted by it to the ground: (a) safely; and (b) without causing such deflection or deformation of any part of the building, or such movement of the ground, as will impair the stability of any part of another building.",{'ID': '1_UK_DocA_Structure'},"The <e1>building</e1> shall be constructed so that the combined dead,imposed and wind loads are <e2>sustained</e2> and transmitted by it to the ground: (a) safely; and (b) without causing such deflection or deformation of any part of the building, or such movement of the ground, as will impair the stability of any part of another building.",none,annotated
+ba93ede4-473f-4c07-b439-3699580cbcbe,No individual flight has a rise of more than 1800mm between landings.,{'ID': '21_UK_DocM_V1_AccessAndUseOfBuildings'},No individual <e1>flight</e1> has a rise of more than 1800mm <e2>between landings</e2>.,none,annotated
+05dc10dc-6a9a-4e83-93d3-79fff4819f99,Standing areas must be terraced so that it is safe to move in the rows.,{'ID': '110_Finnish_SafetyOfUse'},<e1>Standing areas</e1> must be <e2>terraced</e2> so that it is safe to move in the rows.,necessity,annotated
+118d3fd1-0e9d-412f-a77e-fea591ea8e5f,The oil and grease separators shall be equipped with a filling alarm.,{'ID': '154_Finnish_Health-WaterAndSewerage'},The <e1>oil and grease separators</e1> shall be equipped with a <e2>filling alarm</e2>.,necessity,annotated
+203faa23-7b71-47c9-a6e5-2333ac45389e_4,,,"The <e1>air tightness</e1> of the indoor steps of dwelling units and living quarters may be no more than <e2>18 dm3/s</e2>, and the tread must be no less than 250 millimetres.",less-equal,synthetic
+fb5d3054-4911-4049-ba09-1c3e80f9c07c_11,,,"The <e1>air distribution</e1> of steps in uncovered or unheated outdoor staircases must be no less than <e2>0.3</e2>, and the riser may be no more than 130 millimetres.",greater-equal,synthetic
+0a7ff0c7-c5f9-4069-9d7e-2bfd6c4871d3_1,,,The <e1>thermal integrity</e1> of the extension does not exceed <e2>5m</e2>.,less-equal,synthetic
+bb9ec292-062b-43c3-8590-856dd5f6b890_9,,,"The building primary energy rate and <e1>level difference</e1> calculated using the measured air permeability must not be higher than the target primary energy rate and <e2>diameter</e2>, respectively.",less-equal,synthetic
+76acc6bd-50c0-4f3f-b015-42e171ec6ce7_4,,,<e1>70 kN</e1> <e2>stairs</e2> must be installed.,equal,synthetic
+7d877df3-9aa7-4dff-a64d-5356a66c944d,"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a width exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",{'ID': '59_Finnish_SafetyOfUse'},"In public outdoor and indoor spaces, and in business and <e1>service</e1> premises, a handrail must <e2>continue at least 300 millimetres past the start and end points of the structure</e2>, and in the case of stairs or ramps that have a width exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",none,annotated
+46f5be2a-1514-420b-bc39-331fc6e0d2df_8,,,"The dwelling primary energy rate, dwelling emission rate and <e1>thick</e1>, all calculated using the measured air permeability, must not be higher than the target primary energy rate, target emission rate and <e2>breaking</e2>, respectively.",less-equal,synthetic
+5e7d4831-4ec8-48f9-9e60-0422fcc1eae4,"When replacing an existing system, the installed generation capacity of the new system should be no less than that of the existing system, except where a smaller system can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",{'ID': '344_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When replacing an existing system, the installed generation capacity of the new system should be no less than that of the existing system, except where a smaller <e1>system</e1> can be <e2>demonstrated to be more appropriate or effective</e2> (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",selection,annotated
+8fcdc238-3c30-4659-9303-1b126a39b2cd_6,,,The design solar load should be <e1>pass through its openings</e1> by at least <e2>three seconds</e2>.,greater-equal,synthetic
+6ec243f2-9294-4b7c-89a4-1c46e4a69cc9_0,,,"If site constraints necessitate an <e1>house</e1> of <e2>200 m2</e2> or steeper, an approach incorporating ramped access should be provided.",greater-equal,synthetic
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_9,,,"In buildings more than 9 metres and at most <e1>01:08:00</e1> in <e2>rated output</e2>, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",less-equal,synthetic
+a0c838b5-5fe2-4b52-abe1-432804c2c8aa_3,,,A <e1>edges</e1> of 21 C shall be used as the <e2>topography</e2> for room temperature during the heating season.,equal,synthetic
+50e89a86-e2be-439d-b230-79274cd7199b_6,,,Modular and portable buildings with a planned <e1>room temperature</e1> of more than <e2>0.2</e2> at a single location should be shown to comply with the energy efficiency requirements.,greater,synthetic
+d342429e-d3fc-46e0-a195-527cfef1fd4b,"When an existing building with a total useful floor area of over 1000m2 is being extended or the habitable area is being increased, consequential improvements should be installed.",{'ID': '451_UK_DocM_V2_AccessAndUseOfBuildings'},"When an <e1>existing</e1> <e2>building</e2> with a total useful floor area of over 1000m2 is being extended or the habitable area is being increased, consequential improvements should be installed.",selection,annotated
+f5a71c7b-e852-40f2-8f88-91cda7902a7e_4,,,"If a new building has a space heating or airconditioning system with an <e1>heat exchanger area</e1> greater than <e2>eight per cent</e2>, a building automation and control system should be installed.",greater,synthetic
+0da52584-1b37-48b5-840f-3795ae695275,the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,{'ID': '119_UK_DocM_V2_AccessAndUseOfBuildings'},the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where two <e1>doors</e1> are located at 90° relative to each other and where the lifting platform is <e2>enclosed</e2> or where provision is being made for an accompanied wheelchair user.,none,annotated
+46ee0eda-086a-40ab-8e8f-bfa4c85abd49,"If the indoor access route leading to an evacuation area in a non-residential building is via the indoor stairs in the area, these stairs must be wide enough that they can be used to transport an immobile individual on a stretcher.",{'ID': '16_Finnish_SafetyOfUse'},"If the <e1>indoor</e1> access route leading to an evacuation area in a non-residential building is via the indoor stairs in the <e2>area</e2>, these stairs must be wide enough that they can be used to transport an immobile individual on a stretcher.",none,annotated
+e320322e-3aee-4167-ad19-a6c6cc41f597,The water system shall incorporate: 1) a pressure gauge; 2) thermometers in the water pipe of mixed domestic hot water from the water heater and in the domestic hot water ring duct to measure the temperature of return water; 3) throttling valves.,{'ID': '97_Finnish_Health-WaterAndSewerage'},The <e1>water system</e1> shall incorporate: 1) a pressure gauge; 2) thermometers in the <e2>water pipe</e2> of mixed domestic hot water from the water heater and in the domestic hot water ring duct to measure the temperature of return water; 3) throttling valves.,none,annotated
+0f67dad7-6df9-444b-8e72-f447668e3fde_9,,,"Where sanitary facilities are wheelchair accessible, WC pans should be a minimum of <e1>25 decibels</e1> <e2>calculation of primary energy and CO2 emissions</e2>.",greater-equal,synthetic
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_1,,,Skirtings totalling up to <e1>13l/s</e1> <e2>Control</e2> and shallow projecting ducts or casings above 1800mm may be discounted when measuring clear width.,less-equal,synthetic
+3f4eef4b-2dc5-4746-8791-3a37360d6e8a,All people should be able to use presentation facilities.,{'ID': '134_UK_DocM_V2_AccessAndUseOfBuildings'},All <e1>people</e1> should be <e2>able to use presentation facilities</e2>.,necessity,annotated
+0262f6e5-21bc-4312-9388-8ac93b79416d_8,,,The minimum full <e1>entry</e1> of the absorption chillers should be no worse than <e2>44mm</e2>.,greater-equal,synthetic
+f439dcde-3cf9-4b40-b555-a2107ae5559f,"If  the  circulation  piping  is  located inside the building envelope, 50 of the calculated domestic hot water circulation heat loss shall  be  added  to  the  thermal  load  of  the  spaces  of  the  building.",{'ID': '104_Finnish_EnergyEfficiency'},"If the circulation piping is located inside the building envelope, <e1>50</e1> of the calculated domestic hot water circulation heat loss shall be <e2>added to the thermal load of the spaces of the building</e2>.",necessity,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_10,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for <e1>illuminance</e1> <e2>120</e2> and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",equal,synthetic
+20609d43-016e-4314-9620-256f73f1c6ed,"The general ventilation rate for a new conservatory and, if necessary, adjoining rooms could be achieved using background ventilators.",{'ID': '160_UK_DocF_V1_Ventilation'},"The general ventilation rate for a new <e1>conservatory</e1> and, if necessary, adjoining rooms could be <e2>achieved using background ventilators</e2>.",none,annotated
+043258d7-d35e-42d9-87c5-b83565c39ad6,"Before elements are concealed by subsequent work, an onsite audit should be undertaken to confirm that the designed details have been constructed.",{'ID': '133_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Before elements are concealed by subsequent work, an <e1>onsite</e1> <e2>audit</e2> should be undertaken to confirm that the designed details have been constructed.",selection,annotated
+bde1697a-20c9-4f15-a63c-5be323a058c1,Any connection of two or more air handling units to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,{'ID': '90_Finnish_Health-IndoorClimateAndVentilation'},Any connection of two or more air handling units to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of <e1>air flow</e1> <e2>between the rooms and in the ductworks</e2> do not change when the air flows of the units are being controlled.,selection,annotated
+7a42150c-1f5d-449c-ac83-addfe816e46a,Accessible entrances should be clearly sign-posted and easily recognisable.,{'ID': '62_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Accessible</e1> <e2>entrances</e2> should be clearly sign-posted and easily recognisable.,selection,annotated
+eeb4239f-3819-475c-ad20-756bed80c4ff_7,,,"In reference heat loss calculations, the value used as the <e1>opening</e1> of the buildings ventilation system shall be <e2>one</e2>.",equal,synthetic
+0f2dbc3b-0f3e-444e-a688-ed8faebd1226,Seats must be fixed to a base if the floor of the seating area is sloped or if there are level differences between the floors of the respective rows of seats.,{'ID': '105_Finnish_SafetyOfUse'},<e1>Seats</e1> must be fixed to a base if the floor of the seating area is sloped or if there are level differences <e2>between the floors of the respective rows of seats</e2>.,none,annotated
+56b0e4bf-81d7-4ab9-855b-780ef2f0b1d3_9,,,Storage premises with a <e1>ventilation rate</e1> exceeding <e2>two persons per square metre</e2> are not permitted within the building.,greater,synthetic
+d504fd87-d13d-4936-9d7a-71d17954760d,The riser of the steps in an exit may be no more than 180 millimetres.,{'ID': '25_Finnish_SafetyOfUse'},The <e1>riser</e1> of the <e2>steps</e2> in an exit may be no more than 180 millimetres.,part-of,annotated
+4e4fdf56-c45b-4d89-b18f-7a2f24a41ba9_3,,,"In spaces intended for more than 60 persons, the <e1>output</e1> of the access route must be at least <e2>four</e2>.",greater-equal,synthetic
+a8b3e54e-902c-4502-99a2-8c41d46f1416_7,,,"If there are more than <e1>32mm</e1> <e2>space</e2> in a space, they must be linked to one another in at least four groups, unless the chairs are placed around tables.",greater,synthetic
+86350df0-a40e-412b-a301-004524d56736_3,,,"For wet heating systems in new dwellings with a <e1>exposure coefficient</e1> of <e2>500kW</e2> or greater, a minimum of two independently controlled heating circuits should be provided.",greater-equal,synthetic
+7f49ccb1-ce2c-47eb-8b22-2c8e806e5d88_10,,,The resilient layer should be to the full height of the door and <e1>9 metres</e1> <e2>flow rate</e2> of the doorset.,equal,synthetic
+2f8d4247-e53b-49ae-bd26-c4f1765eaee8_10,,,"Extract air of <e1>room temperature</e1> 2, 3 and <e2>0.7</e2> shall not be used as recirculation air.",equal,synthetic
+53e31e26-a39b-4047-a86e-bdb8021413e8_5,,,Window handles on windows that open outwards are not more than <e1>0.2</e1> <e2>power input from controls</e2> when the window is at its maximum openable angle.,less-equal,synthetic
+29c431ee-ea93-491d-ab13-06418d93c488_2,,,"If <e1>categories</e1> is greater than <e2>220 millimetres</e2>, manual control is acceptable.",greater,synthetic
+a9c88566-e4e5-4cba-8165-9916820d9cc5,"Doors, gates and boom barriers must operate safely and in such a way that they do not cause a danger of an accident.",{'ID': '75_Finnish_SafetyOfUse'},"Doors, gates and boom barriers must <e1>operate safely</e1> and in such a way that they do <e2>not cause a danger of an accident</e2>.",selection,annotated
+9497b383-7217-4366-80c5-6f5677b30893,"If the building is heated through a district heat network or community heating system, the effective rated output should be based on the capacity of the equipment installed in the building, making reasonable assumptions for the operation of the district heat network or community heating system, including flow temperatures.",{'ID': '325_UK_DocM_V2_AccessAndUseOfBuildings'},"If the building is heated through a district heat network or community heating system, the <e1>effective</e1> <e2>rated output</e2> should be based on the capacity of the equipment installed in the building, making reasonable assumptions for the operation of the district heat network or community heating system, including flow temperatures.",selection,annotated
+10e66a84-25db-40a0-87d5-6297d0732fe4,The shutoff valves shall be located: 1) at each house; 2) at each apartment; 3) in vertical service pipes; 4) on both sides of devices installed in the service pipes; 5) before a device or fixture that is connected to the connector pipe;  6) on both sides of the water meters.,{'ID': '93_Finnish_Health-WaterAndSewerage'},The shutoff valves shall be located: 1) at each house; 2) at each apartment; 3) in vertical service pipes; 4) on <e1>both sides</e1> of devices installed in the service pipes; 5) before a device or fixture that is connected to the connector pipe; 6) on both sides of the <e2>water meters</e2>.,none,annotated
+208b093d-361f-4aec-819d-4abca4e72c68_5,,,"in an evacuation area where the <e1>total supply air flow</e1> is <e2>250 millimetres</e2>, the second exit may be no less than 900 millimetres in width.",equal,synthetic
+0da52584-1b37-48b5-840f-3795ae695275_2,,,the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where <e1>1 in 40</e1> <e2>open-plan space</e2> are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+5577528f-8fa0-4ca3-96f6-ea418091cb86_1,,,The side edges of stairs and landings must be fitted with a raised camber to prevent slipping over the edge if a cube measuring more than <e1>2</e1> in <e2>luminous efficacy</e2> is able to pass through the opening between the plane level and the handrail or wall.,greater,synthetic
+113b8bf8-1856-45f5-a54b-d65ef100b437_1,,,"If a gas-fired combination boiler is installed in an existing dwelling, at least <e1>70 kN</e1> of the following <e2>target emission rate</e2>, appropriate to the system, should be installed.",greater-equal,synthetic
+56b0e4bf-81d7-4ab9-855b-780ef2f0b1d3_8,,,Storage premises with a <e1>from the top and bottom corners of the door</e1> exceeding <e2>1m2</e2> are not permitted within the building.,greater,synthetic
+a894077e-cebf-4559-9254-ce964bc11b0f,Air flow rates for mechanical ventilation in new dwellings must be measured.,{'ID': '182_UK_DocF_V1_Ventilation'},Air flow rates for <e1>mechanical</e1> <e2>ventilation</e2> in new dwellings must be measured.,selection,annotated
+5fa7daca-cb50-4397-a736-617e52d30187_10,,,"If <e1>target fabric energy efficiency rate</e1> at below 30% are required and unavailable, the <e2>sections</e2> may be taken as equal to that at 30% load.",equal,synthetic
+b5addb77-be99-45a2-8dc0-fdf5d1969a57,Each column and wall shall be supplied with continuous vertical ties from the foundations to the roof level.,{'ID': '194_Finnish_StabilityOfStructures'},Each <e1>column</e1> and wall shall be supplied with continuous vertical <e2>ties</e2> from the foundations to the roof level.,necessity,annotated
+6187cad8-0d6d-4154-b98b-7285b36fea8d,Continuously running fans should be set up to operate without occupant intervention but may have manual or automatic controls for selecting the high rate of operation.,{'ID': '65_UK_DocF_V1_Ventilation'},Continuously running <e1>fans</e1> should be <e2>set up to operate without occupant intervention</e2> but may have manual or automatic controls for selecting the high rate of operation.,necessity,annotated
+db734798-9e42-4fe1-900c-77d4e6131809,"The main doors for entering a dwelling (usually the front door) should have a door viewer unless other means exist to see callers, such as clear glass within the door or a window next to the doorset.",{'ID': '11_UK_DocQ_Security_Dwellings'},"The main doors for entering a dwelling (usually the front door) should have a door viewer unless other means exist to see callers, such as clear glass within the door or a <e1>window</e1> <e2>next to the doorset</e2>.",selection,annotated
+bfdf95da-d422-47cd-83d7-a30a4969f2e6_2,,,"If the internal ties must be centred on the supporting line, the minimum value of the <e1>Air permeability</e1>, <e2>25</e2>, will also be applied to internal ties.",greater-equal,synthetic
+6a41a473-bd3c-4e38-a093-094b3fdae388_0,,,At least one in every <e1>1.2W/(m2K)</e1> remaining <e2>waste</e2> must be provided with cable routes.,equal,synthetic
+656aa2fa-18cb-41ee-ae28-28deb3dffcc3_3,,,The <e1>Geo-location</e1> of the water in the hot water system shall be at least <e2>850 millimetres</e2> and available from the hot water plumbing fixture within 20 seconds.,greater-equal,synthetic
+590ab551-79e8-42f5-bc52-749f8899c088,Extinguishing routes to basement storeys shall be arranged so that basement storeys can be reached from the ground level without a need to pass through the exits of the storeys.,{'ID': '242_Finnish_FireSafety'},Extinguishing routes to basement storeys shall be arranged so that <e1>basement storeys</e1> can be <e2>reached from the ground level without a need to pass through the exits of the storeys</e2>.,selection,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",{'ID': '84_Finnish_Health-IndoorClimateAndVentilation'},"If the air flows of extract air categories <e1>1</e1> and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the <e2>combined</e2> air flow is classified under category 2.",none,annotated
+7d35f4c4-fa65-4d68-a974-f54386ca8aee_2,,,"However, a horizontal <e1>shutoff valves</e1> in a protective part must be no higher than <e2>500kW</e2>.",less-equal,synthetic
+0f67dad7-6df9-444b-8e72-f447668e3fde_1,,,"Where sanitary facilities are wheelchair accessible, WC pans should be a minimum of <e1>0.15</e1> <e2>location</e2>.",greater-equal,synthetic
+cb522b91-f26f-460e-adee-1a7f59ba10c9,"For heat pump installations in which there are other heat sources available to the same building, each of these heat sources should be appropriately incorporated into a singular control system.",{'ID': '315_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For heat pump installations in which there are <e1>other</e1> <e2>heat sources</e2> available to the same building, each of these heat sources should be appropriately incorporated into a singular control system.",selection,annotated
+12e545d1-64f4-45c9-a520-5b8a003eba0a_4,,,"If the dwelling has more than <e1>70 kN</e1> exposed <e2>commercial part</e2>, the area of background ventilators on each facade should be similar, to allow cross-ventilation.",greater,synthetic
+33eb3a5a-584f-4d1e-84a0-35fe66954d80,Consideration should be given to the power requirements of essential (e.g. life safety) systems.,{'ID': '323_UK_DocM_V2_AccessAndUseOfBuildings'},Consideration should be given to the <e1>power requirements</e1> of essential (e.g. life safety) <e2>systems</e2>.,part-of,annotated
+4d54279f-8590-4a58-86d5-afb7f3069870,"The apartment-specific water meters shall be located in a place where they are easy to install, read and service.",{'ID': '75_Finnish_Health-WaterAndSewerage'},"The <e1>apartment-specific</e1> <e2>water meters</e2> shall be located in a place where they are easy to install, read and service.",selection,annotated
+03bdab65-fc14-4101-add9-f26c25f41e82,A drainage point shall be equipped with a cleansable water seal.,{'ID': '134_Finnish_Health-WaterAndSewerage'},A <e1>drainage point</e1> shall be equipped with a cleansable <e2>water seal</e2>.,necessity,annotated
+c1b2e39e-0bab-438c-8b35-c2b37e5cf93a,"Equipment should be designed, specified and installed with the aim of maximising its efficiency as installed.",{'ID': '233_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Equipment</e1> should be <e2>designed</e2>, specified and installed with the aim of maximising its efficiency as installed.",necessity,annotated
+f6add908-4d45-4b3e-83a6-369f6c36c037_7,,,"Door rails, stiles and muntins should be at least <e1>100 litres</e1> <e2>surface area</e2>.",greater-equal,synthetic
+eccd4f77-ef4a-41fd-a22a-620c84fdddd4_9,,,There is a minimum of <e1>five</e1> of worktop to at least <e2>rise</e2> of the oven and fridge or fridge freezer where this is taller than the worktop height (or to one side of a pair of tall appliances where they are located together at the end of a run).,greater-equal,synthetic
+f5a71c7b-e852-40f2-8f88-91cda7902a7e_10,,,"If a new building has a space heating or airconditioning system with an <e1>control function</e1> greater than <e2>9 metres</e2>, a building automation and control system should be installed.",greater,synthetic
+208b093d-361f-4aec-819d-4abca4e72c68_3,,,"in an evacuation area where the <e1>floor area</e1> is <e2>8.5m2</e2>, the second exit may be no less than 900 millimetres in width.",equal,synthetic
+9ff8b8fd-5361-4c3d-9a7e-7459276c8df7_3,,,The <e1>deep</e1> must not exceed the individual dwellings <e2>number of wall ties per square metre</e2>.,less-equal,synthetic
+31d635b2-1d32-49dd-a848-5b5acaf50128,"For existing dwellings, when installing a complete new or replacement system (e.g. replacing a heating system including the heating appliance, pipework and heat emitters), the energy performance of the whole system should be assessed.",{'ID': '407_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For existing dwellings, when <e1>installing a complete new or replacement system</e1> (e.g. replacing a heating system including the heating appliance, pipework and heat emitters), the <e2>energy performance</e2> of the whole system should be assessed.",none,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",{'ID': '83_Finnish_SafetyOfUse'},"The free opening of the <e1>vertical</e1> hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the <e2>sum</e2> of these must be at least 1,500 millimetres.",none,annotated
+46f5be2a-1514-420b-bc39-331fc6e0d2df,"The dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the target primary energy rate, target emission rate and target fabric energy efficiency rate, respectively.",{'ID': '356_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The <e1>dwelling primary energy rate</e1>, dwelling emission rate and dwelling fabric energy efficiency rate, all <e2>calculated using the measured air permeability</e2>, must not be higher than the target primary energy rate, target emission rate and target fabric energy efficiency rate, respectively.",selection,annotated
+1b6fbbfe-8dc1-40f6-9523-dd2d22447419,Variable volume control systems should be used to reduce the volume of water and the pressure difference required from the pumps under part load.,{'ID': '293_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Variable volume control systems</e1> should be <e2>used to reduce the volume of water and the pressure difference required from the pumps under part load</e2>.,necessity,annotated
+efd2d371-97de-4d5e-af06-e404ff71f316,The impact of the ground and crawl space on heat loss shall be taken into account in heat loss calculations.,{'ID': '91_Finnish_EnergyEfficiency'},The impact of the <e1>ground</e1> and crawl space on heat loss shall be <e2>taken into account in heat loss calculations</e2>.,none,annotated
+457ecdc0-8247-4ad4-9beb-3b7a31cfa0fd,"All public areas, including lavatory accommodation, public telephones and external terraces should be accessible.",{'ID': '138_UK_DocM_V2_AccessAndUseOfBuildings'},"All public areas, including lavatory accommodation, <e1>public</e1> <e2>telephones</e2> and external terraces should be accessible.",selection,annotated
+2a2dbb92-88af-47f5-bd1e-b3ddea4c1ec9,"The approach route should be safe and convenient for everyone, be at the shallowest gradient that can reasonably be achieved, and be stepfree, irrespective of the storey on which the dwelling is located.",{'ID': '70_UK_DocM_V1_AccessAndUseOfBuildings'},"The approach route should be safe and convenient for everyone, <e1>be at the shallowest gradient that can reasonably be achieved</e1>, and <e2>be stepfree</e2>, irrespective of the storey on which the dwelling is located.",none,annotated
+7d35f4c4-fa65-4d68-a974-f54386ca8aee_0,,,"However, a horizontal <e1>fire wall</e1> in a protective part must be no higher than <e2>150mm</e2>.",less-equal,synthetic
+239bd568-c5f2-4ab5-955c-f2d8d86b7b7f,"Where closing devices are needed for fire control, electrically powered hold-open devices or swing-free closing devices should be used as appropriate.",{'ID': '90_UK_DocM_V2_AccessAndUseOfBuildings'},"Where closing devices are needed for fire control, <e1>electrically powered</e1> <e2>hold-open devices</e2> or swing-free closing devices should be used as appropriate.",selection,annotated
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab_4,,,"If the <e1>thick</e1> of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds <e2>One</e2> of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",greater,synthetic
+6a553c19-481f-4947-9047-fd2c4d0daa44,"Any floors, walls and doors that have been installed to allow the potential liftway to be used as storage or for other purposes could be easily removed without structural alteration.",{'ID': '83_UK_DocM_V1_AccessAndUseOfBuildings'},"Any floors, walls and <e1>doors</e1> that have been installed to allow the potential liftway to be used as storage or for other purposes could be <e2>easily removed without structural alteration</e2>.",necessity,annotated
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c_0,,,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding <e1>200 lux</e1> <e2>sanitary accommodation</e2> is EI 30; however, minor sealing parts and penetrations may be class E 15.",greater,synthetic
+6a41a473-bd3c-4e38-a093-094b3fdae388_11,,,At least one in every <e1>9 metres</e1> remaining <e2>damage</e2> must be provided with cable routes.,equal,synthetic
+113b8bf8-1856-45f5-a54b-d65ef100b437_9,,,"If a gas-fired combination boiler is installed in an existing dwelling, at least <e1>300 litres</e1> of the following <e2>facade area</e2>, appropriate to the system, should be installed.",greater-equal,synthetic
+81f14fc1-af5d-45e8-8725-94d2510e4701,"A dwelling that is intended for service housing or supported housing of a person with mobility and functional impairment shall, irrespective of the number of storeys in the building, have a turning  space  with  a  diameter  of  at  least  1,500  millimetres  in  the  hallway  and  kitchen.",{'ID': '29_Finnish_Accessibility'},"A dwelling that is intended for service housing or supported housing of a person with mobility and functional impairment shall, irrespective of the number of storeys in the building, have a <e1>turning space</e1> with a diameter of at least 1,500 millimetres in the <e2>hallway</e2> and kitchen.",part-of,annotated
+7f49ccb1-ce2c-47eb-8b22-2c8e806e5d88,The resilient layer should be to the full height of the door and 600mm either side of the doorset.,{'ID': '15_UK_DocQ_Security_Dwellings'},The resilient layer should be to the full height of the door and 600mm <e1>either side</e1> of the <e2>doorset</e2>.,part-of,annotated
+a477ee34-044e-443b-a95f-fbb1da913c38,"Changing places toilets, facilities designed for individuals with complex and multiple impairments who may require the assistance of up to two assistants, should be provided in addition to any wheelchair-accessible accommodation in separate-sex toilet washrooms, wheelchair-accessible unisex toileting facilities and baby changing facilities.",{'ID': '160_UK_DocM_V2_AccessAndUseOfBuildings'},"Changing places toilets, facilities designed for individuals with complex and multiple impairments who may require the assistance of up to two assistants, should be provided in addition to any wheelchair-accessible <e1>accommodation</e1> in separate-sex toilet <e2>washrooms</e2>, wheelchair-accessible unisex toileting facilities and baby changing facilities.",part-of,annotated
+8cef7dc5-2d76-4dd8-80c5-6861b11a8f6f_7,,,"Where the work concerns a building containing more than <e1>55 degrees Celsius</e1> <e2>tears</e2>, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",greater-equal,synthetic
+793cb939-b3d9-46eb-ae65-71a4d5c8031b_1,,,Where the parking is within the private curtilage of the dwelling (but not within a carport or garage) at least one space is a standard parking bay that can be <e1>fire resistance time requirement</e1> to <e2>20</e2>.,less-equal,synthetic
+99a53f17-48cb-4012-a47b-700761e0983b_4,,,Where a new building which is not a residential building or a mixed-use building has more than 10 parking spaces (a) <e1>0.7W/(m2K)</e1> of those <e2>ventilation space or gap</e2> must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,equal,synthetic
+bfdf95da-d422-47cd-83d7-a30a4969f2e6_8,,,"If the internal ties must be centred on the supporting line, the minimum value of the <e1>luminous efficacy</e1>, <e2>01:08:00</e2>, will also be applied to internal ties.",greater-equal,synthetic
+c47598f9-df79-4d77-aba9-8f380342372f_0,,,extract air of <e1>effective rated output</e1> <e2>0.7W/(m2K)</e2> shall be conducted to the outdoors through individual extract air ducts.,equal,synthetic
+f009a781-0ced-408d-b3d1-6ae7a848012e,"The landings in the indoor and outdoor areas of a building must be safe, sufficiently spacious and suitable for their purpose.",{'ID': '31_Finnish_SafetyOfUse'},"The landings in the indoor and <e1>outdoor</e1> areas of a building must be safe, sufficiently spacious and <e2>suitable for their purpose</e2>.",none,annotated
+8151be81-09ad-4dac-b2d2-f0d757915b6c,"However, when the snow load can occur, the minimum value of the load s should be at least 0.5 kN/m2.",{'ID': '110_Finnish_StabilityOfStructures'},"However, when the <e1>snow load</e1> can <e2>occur</e2>, the minimum value of the load s should be at least 0.5 kN/m2.",selection,annotated
+da4d5959-6e64-4e04-a1f3-8b42b6addab0_9,,,The outdoor <e1>cost</e1> used in the calculations for buildings other than those in intended use categories 1 and 2 outside the occupancy period shall be at least <e2>40 degrees Celsius</e2>.,greater-equal,synthetic
+8cef7dc5-2d76-4dd8-80c5-6861b11a8f6f_8,,,"Where the work concerns a building containing more than <e1>1,200 MJ/m2</e1> <e2>Fire</e2>, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",greater,synthetic
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_6,,,"The wall ties should have a horizontal spacing of 900mm and a vertical spacing of 450mm, or alternatively should be spaced such that the <e1>ending</e1> is not less than <e2>25</e2>.",greater-equal,synthetic
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",{'ID': '83_Finnish_SafetyOfUse'},"The free opening of the <e1>vertical</e1> <e2>hatch</e2> or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",selection,annotated
+5ca184fa-e100-4f97-957d-e37ae944786f,The cost of installing electric vehicle charge points and cable routes is not more than 7% of the total capital cost of the major renovation.,{'ID': '51_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},The cost of installing electric vehicle charge points and cable routes is not more than 7% of the <e1>total capital cost</e1> of the major <e2>renovation</e2>.,part-of,annotated
+c236bc17-ef9a-4694-a34e-68a9f38ae405,"For a heat exchanger between a solar primary and secondary system, a minimum of 0.1m2 or equivalent of heat exchanger area should be provided for every 1m2 of the net absorber area of the solar collector.",{'ID': '323_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For a heat exchanger between a solar primary and secondary system, a minimum of 0.1m2 or equivalent of heat exchanger area should be provided for every 1m2 of the <e1>net absorber area</e1> of the <e2>solar collector</e2>.",part-of,annotated
+8101fa0e-645c-4a83-a6ab-66c45e94bf67,"If the dwelling already has mechanical ventilation, the centralised system could be extended into the additional room.",{'ID': '155_UK_DocF_V1_Ventilation'},"If the dwelling already has <e1>mechanical</e1> <e2>ventilation</e2>, the centralised system could be extended into the additional room.",selection,annotated
+6414854d-01f9-481f-a7f4-c4581e48d8b1,Special safety features are not necessary if the ladder is not more than 6m long.,{'ID': '112_UK_DocK_ProtectionFromFalling'},Special safety features are <e1>not necessary</e1> if the ladder is not more than 6m <e2>long</e2>.,none,annotated
+fb5d3054-4911-4049-ba09-1c3e80f9c07c,"The tread of steps in uncovered or unheated outdoor staircases must be no less than 390 millimetres, and the riser may be no more than 130 millimetres.",{'ID': '29_Finnish_SafetyOfUse'},"The tread of steps in uncovered or <e1>unheated</e1> outdoor <e2>staircases</e2> must be no less than 390 millimetres, and the riser may be no more than 130 millimetres.",selection,annotated
+3c6b438e-d99a-4c4d-aa19-0ec4f3f27662,"When installing controlled fittings, the controlled fitting should be well fitted and reasonably draught-proof.",{'ID': '162_UK_DocM_V2_AccessAndUseOfBuildings'},"When installing controlled fittings, the <e1>controlled fitting</e1> should be <e2>well fitted</e2> and reasonably draught-proof.",necessity,annotated
+d0ef750b-078c-4e63-a57f-298674c06a5e,Moisture-resistant insulation should be fitted below damp-proof course level and extend to the foundation block/structure.,{'ID': '136_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Moisture-resistant</e1> <e2>insulation</e2> should be fitted below damp-proof course level and extend to the foundation block/structure.,selection,annotated
+c3cfbf29-a95f-4453-a7de-a8f6e4ca2ea8,"If sand, sludge, grease, petrol, oil or other detrimental physical or chemical substances may end up in the sewerage system or network or in the environment, the sewerage system shall be equipped with a separator or treatment device.",{'ID': '152_Finnish_Health-WaterAndSewerage'},"If sand, sludge, grease, petrol, oil or other detrimental physical or chemical substances may end up in the sewerage system or network or in the environment, the <e1>sewerage system</e1> shall be equipped with a <e2>separator or treatment device</e2>.",necessity,annotated
+46f5be2a-1514-420b-bc39-331fc6e0d2df_2,,,"The <e1>total supply air flow</e1>, dwelling emission rate and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the <e2>Control</e2>, target emission rate and target fabric energy efficiency rate, respectively.",less-equal,synthetic
+a86b58e8-046f-44b7-8e1b-00c876c8c647,"Parapets in categories A to E and panel parts of walls acting as parapets, as well as their fasteners, shall be designed to the concentrated load Qk = 0.3 kN acting on a random spot.",{'ID': '30_Finnish_StabilityOfStructures'},"Parapets in categories <e1>A</e1> to <e2>E</e2> and panel parts of walls acting as parapets, as well as their fasteners, shall be designed to the concentrated load Qk = 0.3 kN acting on a random spot.",none,annotated
+da4d5959-6e64-4e04-a1f3-8b42b6addab0,The outdoor air flow used in the calculations for buildings other than those in intended use categories 1 and 2 outside the occupancy period shall be at least 0.15 dm3/s per m2.,{'ID': '67_Finnish_EnergyEfficiency'},The outdoor <e1>air flow</e1> used in the calculations for buildings other than those in intended use categories 1 and 2 outside the occupancy period shall be at least <e2>0.15 dm3/s per m2</e2>.,greater-equal,annotated
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3_2,,,"Where the <e1>depth</e1> of installing only cable routes is more than <e2>10 kN</e2> of the total cost of the major renovation, there is no requirement to install either electric vehicle charge points or cable routes.",greater,synthetic
+5fa7daca-cb50-4397-a736-617e52d30187_11,,,"If <e1>service</e1> at below 30% are required and unavailable, the <e2>prevailing wind direction</e2> may be taken as equal to that at 30% load.",equal,synthetic
+63af9f99-6939-4e8c-a6a9-8b10942e1597_0,,,"The handle to at least <e1>0.15</e1> <e2>raked auditoria</e2> in the principal living area is located between 450mm and 1200mm above floor level, unless the window is fitted with a remote opening device that is within this height range.",greater-equal,synthetic
+e1f1aeb9-7453-4b6b-b3f1-6049d711868a,The fire performance of the external wall structure of a building no more than 56 metres in height may also be demonstrated by a fullscale test.,{'ID': '156_Finnish_FireSafety'},The fire performance of the external <e1>wall structure</e1> of a <e2>building</e2> no more than 56 metres in height may also be demonstrated by a fullscale test.,part-of,annotated
+1913381b-a2cc-496e-9168-82ccf2a01d50,"In connection with repair and alteration work, the heat emitters connected to the domestic hot water ring duct may be replaced so that the heat emission capacity of the heat emitters to be installed does not exceed 200 Watts per room.",{'ID': '67_Finnish_Health-WaterAndSewerage'},"In connection with repair and alteration work, the heat emitters connected to the domestic hot water ring duct may be <e1>replaced</e1> so that the heat emission capacity of the <e2>heat emitters</e2> to be installed does not exceed 200 Watts per room.",necessity,annotated
+6cd271a0-e7d4-4853-868f-38e8b5012a95,"The approach route should be safe and convenient for everyone, including older and disabled people and some wheelchair users.",{'ID': '13_UK_DocM_V1_AccessAndUseOfBuildings'},"The <e1>approach route</e1> should be <e2>safe and convenient for everyone, including older and disabled people and some wheelchair users</e2>.",necessity,annotated
+302c413e-fefd-47f1-914f-0dc787e4a761_4,,,"Where <e1>supports</e1> on surfaces is greater than <e2>EI 30</e2>, a difference in light reflectance value should be a minimum of 20 points.",greater,synthetic
+783c19fa-0ef2-466f-b3e9-d4690e34ac5f,Where a system for onsite electricity generation is installed (a) reasonable provision must be made to ensure that (i) the system and its electrical output are appropriately sized for the site and available infrastructure; (ii) the system has effective controls; and (b) it must be commissioned by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.,{'ID': '214_UK_DocL_V1_ConsrvationOfFuelAndPower'},Where a system for onsite electricity generation is installed (a) reasonable provision must be made to ensure that (i) the system and its <e1>electrical output</e1> are <e2>appropriately sized for the site and available infrastructure</e2>; (ii) the system has effective controls; and (b) it must be commissioned by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.,necessity,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",{'ID': '83_Finnish_SafetyOfUse'},"The free opening of the <e1>vertical</e1> hatch or window of an emergency exit must be at least <e2>600 millimetres</e2> in height and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",none,annotated
+d0ef750b-078c-4e63-a57f-298674c06a5e,Moisture-resistant insulation should be fitted below damp-proof course level and extend to the foundation block/structure.,{'ID': '136_UK_DocL_V1_ConsrvationOfFuelAndPower'},Moisture-resistant <e1>insulation</e1> should be fitted below damp-proof course level and <e2>extend to the foundation block/structure</e2>.,necessity,annotated
+77be05f2-cd8c-4d35-85e4-6637b999d8e7_1,,,The <e1>constraints</e1> of the consequential improvement works should not be less than <e2>half a metre</e2> of the value of the principal works.,greater-equal,synthetic
+e3b85ad6-6132-40d7-86f8-3cc5d44eb12c_11,,,<e1>two</e1> <e2>private curtilage</e2> should be close to an accessible bathroom suitable for a wheelchair user.,equal,synthetic
+37f30855-f103-43f1-aef2-b37c05b4c174,Facilitating future connection to any local district heat networks should be considered (e.g. providing capped off connections in pipework to allow later connection to a local district heat network).,{'ID': '232_UK_DocL_V1_ConsrvationOfFuelAndPower'},Facilitating <e1>future</e1> <e2>connection</e2> to any local district heat networks should be considered (e.g. providing capped off connections in pipework to allow later connection to a local district heat network).,selection,annotated
+5e7d4831-4ec8-48f9-9e60-0422fcc1eae4,"When replacing an existing system, the installed generation capacity of the new system should be no less than that of the existing system, except where a smaller system can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",{'ID': '344_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When replacing an existing system, the installed generation capacity of the new system should be no less than <e1>that</e1> of the existing system, except where a smaller <e2>system</e2> can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",none,annotated
+05864826-21ef-4ae7-9af8-2aaeffc7267a_5,,,Modular and portable buildings with a planned service life of more than two years but with an <e1>design value</e1> in a single location of less than <e2>5m</e2> should be shown to comply with the energy efficiency requirements.,less,synthetic
+66b3628a-f0ee-4bc7-93c8-2ae0145a2e78_9,,,"In a <e1>roof-lights</e1> with no openable <e2>residential buildings</e2>, an intermittent extract fan should be provided with controls which continue to operate the fan for at least 15 minutes after the room is vacated.",not-part-of,synthetic
+ec381965-2539-4bd6-9260-e667b4746a3a,To reduce the risks to the health of persons in buildings formaldehyde fumes given off by urea formaldehyde foams should not penetrate to occupied parts of buildings to an extent which would give rise to an irritant concentration.,{'ID': '4_UK_DocD_ToxicSubstances'},To reduce the risks to the health of persons in buildings <e1>formaldehyde fumes</e1> given off by urea formaldehyde foams should <e2>not penetrate to occupied parts of buildings to an extent which would give rise to an irritant concentration</e2>.,necessity,annotated
+7f3f59a4-fc7e-4b14-8074-384f6cacf548,"The height of a barrier in a dwellings indoor areas may, however, be at least 0.9 metres if the drop is less than three metres.",{'ID': '45_Finnish_SafetyOfUse'},"The <e1>height</e1> of a <e2>barrier</e2> in a dwellings indoor areas may, however, be at least 0.9 metres if the drop is less than three metres.",part-of,annotated
+5b4380ba-0066-4735-a362-316d4c8e70b2,"Where a building undergoing major renovation, which is not a residential building or a mixeduse building, will have more than 10 parking spaces after the major renovation is completed (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.",{'ID': '73_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where a building <e1>undergoing major renovation</e1>, which is <e2>not a residential building or a mixeduse building</e2>, will have more than 10 parking spaces after the major renovation is completed (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.",none,annotated
+511c1a7f-08b9-48ec-aea6-9b749fdf31a1_9,,,"A non-residential building shall, considering the intended use and functional units of the building and distances in the building, have an <e1>15 degrees</e1> of appropriately located <e2>wash rooms</e2> which are suitable for users of wheelchairs and walking frames with wheels.",equal,synthetic
+45338082-ca66-418b-8fe1-8f2be926f330_1,,,A <e1>opening</e1> of no more than <e2>20C</e2> may pass between the stair steps.,less-equal,synthetic
+07565483-7508-43fc-b15e-82d95881e81e,"The average dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate should be calculated using the same averaging methodology.",{'ID': '70_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The <e1>average</e1> <e2>dwelling primary energy rate</e2>, dwelling emission rate and dwelling fabric energy efficiency rate should be calculated using the same averaging methodology.",selection,annotated
+46ee0eda-086a-40ab-8e8f-bfa4c85abd49,"If the indoor access route leading to an evacuation area in a non-residential building is via the indoor stairs in the area, these stairs must be wide enough that they can be used to transport an immobile individual on a stretcher.",{'ID': '16_Finnish_SafetyOfUse'},"If the indoor access route leading to an evacuation area in a non-residential building is via the <e1>indoor</e1> <e2>stairs</e2> in the area, these stairs must be wide enough that they can be used to transport an immobile individual on a stretcher.",selection,annotated
+1d18f0c9-31e5-43ee-8f16-e4fa607c5cd9,"The same approved calculation tool must be used to calculate the target primary energy rate, the target emission rate, the building primary energy rate and the building emission rate.",{'ID': '51_UK_DocM_V2_AccessAndUseOfBuildings'},"The same approved calculation tool must be <e1>used to calculate</e1> the target primary energy rate, the target emission rate, the <e2>building primary energy rate</e2> and the building emission rate.",selection,annotated
+c2e0629d-350b-45b8-9e9e-d58be1780f12_5,,,"If the <e1>ramp</e1> has no <e2>heating systems</e2>, it should be treated as having one bedroom when calculating the ventilation required for the purposes of meeting the ventilation standards.",not-part-of,synthetic
+01d924bf-4a69-4eb8-b05e-ce993aee3d45_9,,,Perimeter insulation should be continuous and have a minimum <e1>energy efficiency measures</e1> of <e2>two </e2>.,greater-equal,synthetic
+333110c1-ba9e-4c1d-9249-6604f49ba09a,"The presence of doors, whether open or closed, should be apparent to visually impaired people through the careful choice of colour and material for the door and its surroundings.",{'ID': '91_UK_DocM_V2_AccessAndUseOfBuildings'},"The presence of <e1>doors</e1>, whether open or <e2>closed</e2>, should be apparent to visually impaired people through the careful choice of colour and material for the door and its surroundings.",selection,annotated
+01008f69-874b-443e-bcb2-2f5630280049,"If stairs are used only as an emergency exit and if they lead to spaces in a dwelling or accommodation facility other than those that are necessary for living, the riser may be no more than 220 millimetres and the tread must be no less than 220 millimetres.",{'ID': '24_Finnish_SafetyOfUse'},"If stairs are used only as an emergency exit and if they lead to spaces in a dwelling or accommodation facility other than those that are necessary for living, the riser may be no more than <e1>220 millimetres</e1> and the <e2>tread</e2> must be no less than 220 millimetres.",none,annotated
+66b3628a-f0ee-4bc7-93c8-2ae0145a2e78_7,,,"In a <e1>entrance</e1> with no openable <e2>text</e2>, an intermittent extract fan should be provided with controls which continue to operate the fan for at least 15 minutes after the room is vacated.",not-part-of,synthetic
+b4ae0bf1-8dec-4e43-b10b-4a593780d742,Partitioning doors in accommodation premises shall be equipped with closing devices.,{'ID': '121_Finnish_FireSafety'},<e1>Partitioning</e1> <e2>doors</e2> in accommodation premises shall be equipped with closing devices.,selection,annotated
+7f49ccb1-ce2c-47eb-8b22-2c8e806e5d88_2,,,The resilient layer should be to the full height of the door and <e1>20 degrees Celsius</e1> <e2>Air permeability</e2> of the doorset.,equal,synthetic
+46f5be2a-1514-420b-bc39-331fc6e0d2df_9,,,"The dwelling primary energy rate, dwelling emission rate and <e1>total air flow</e1>, all calculated using the measured air permeability, must not be higher than the target primary energy rate, target emission rate and <e2>ending</e2>, respectively.",less-equal,synthetic
+05864826-21ef-4ae7-9af8-2aaeffc7267a_0,,,Modular and portable buildings with a planned <e1>impact</e1> of more than <e2>two</e2> but with an intended time of use in a single location of less than two years should be shown to comply with the energy efficiency requirements.,greater,synthetic
+5ba5ffe7-ece8-488a-b461-da66237e7888,"All walls, ducts and boxings to the WC/cloakroom, bathroom and shower room should be strong enough to support grab rails, seats and other adaptations that could impose a load of up to 1.5kN/m2.",{'ID': '54_UK_DocM_V1_AccessAndUseOfBuildings'},"All walls, <e1>ducts</e1> and boxings to the WC/cloakroom, bathroom and <e2>shower room</e2> should be strong enough to support grab rails, seats and other adaptations that could impose a load of up to 1.5kN/m2.",part-of,annotated
+3ca5cb38-b90b-4449-ba14-4268866df8e1_11,,,The water heater is close to the draw-off points and has a <e1>exposure coefficient</e1> no greater than <e2>500kW</e2>.,less-equal,synthetic
+d988e207-c3f9-4314-9a16-f99b334595f4_2,,,The <e1>location</e1> must be no less than <e2>Five ventilators</e2>.,greater-equal,synthetic
+fa90c179-d32c-412b-a7d6-a515cc91dbdb,The structure of the exterior wall against the ground must be waterproofed or isolated against water pressure or a structurally managed water removal system allowing the cellar wall to dry in an outward direction must be used to prevent moisture from the surrounding ground and storm water from penetrating the wall structure.,{'ID': '86_Finnish_Health-Humidity'},The <e1>structure</e1> of the <e2>exterior wall</e2> against the ground must be waterproofed or isolated against water pressure or a structurally managed water removal system allowing the cellar wall to dry in an outward direction must be used to prevent moisture from the surrounding ground and storm water from penetrating the wall structure.,part-of,annotated
+05fdde92-d8af-42ad-963b-9019c69a8ab3,"For a timber frame where the intermediate floor structure breaches the external wall insulation, further insulation of the same thickness as the insulation used in the external wall should be included within the depth of the intermediate floor structure.",{'ID': '163_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For a timber frame where the intermediate floor structure breaches the external wall insulation, further insulation of the same thickness as the <e1>insulation</e1> <e2>used in the external wall</e2> should be included within the depth of the intermediate floor structure.",selection,annotated
+333d5feb-81a7-47b9-bc60-64d51e7845b0,The insulation should be reasonably continuous across newly built elements.,{'ID': '149_UK_DocM_V2_AccessAndUseOfBuildings'},The <e1>insulation</e1> should be <e2>reasonably continuous across newly built elements</e2>.,necessity,annotated
+72e7ed0c-9e73-46b2-a919-20f3fea337fd,"An area with a potentially flammable or explosive atmosphere must not be located in a building where there are dwellings, accommodation premises, institutions or assembly and business premises.",{'ID': '56_Finnish_FireSafety'},"An area with a potentially flammable or explosive atmosphere must not be located in a <e1>building</e1> where there are <e2>dwellings</e2>, accommodation premises, institutions or assembly and business premises.",part-of,annotated
+4abb3268-3ba6-47e8-a8b7-4676dbaa9a16,"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide all means of escape routes with a minimum clear headroom of 2m, except in doorways.",{'ID': '28_UK_DocK_ProtectionFromFalling'},"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide all means of escape routes with a <e1>minimum</e1> clear <e2>headroom</e2> of 2m, except in doorways.",selection,annotated
+333110c1-ba9e-4c1d-9249-6604f49ba09a,"The presence of doors, whether open or closed, should be apparent to visually impaired people through the careful choice of colour and material for the door and its surroundings.",{'ID': '91_UK_DocM_V2_AccessAndUseOfBuildings'},"The presence of <e1>doors</e1>, whether <e2>open</e2> or closed, should be apparent to visually impaired people through the careful choice of colour and material for the door and its surroundings.",selection,annotated
+493ec553-7761-4d1e-aa98-05d925ddf955,The opening of a horizontal hatch must be at least 600 x 600 millimetres.,{'ID': '84_Finnish_SafetyOfUse'},The <e1>opening</e1> of a horizontal <e2>hatch</e2> must be at least 600 x 600 millimetres.,part-of,annotated
+2a256a9c-0b8a-4acf-87e1-86a5857f36a3_1,,,"Where a driveway forms all, or part of, the approach route, an <e1>fire and smoke-proof</e1> of at least <e2>2.4m</e2> wide should be provided so that a wheelchair user can pass a parked car.",greater-equal,synthetic
+fa8a6d84-eb99-490e-8169-3c65353fb553_7,,,"For large roofs, where the smaller horizontal dimension of the roof is 50 m or more, and the topography is windswept, the value of the <e1>drop</e1> shall be at least <e2>900-1000mm</e2>.",greater-equal,synthetic
+99a53f17-48cb-4012-a47b-700761e0983b,Where a new building which is not a residential building or a mixed-use building has more than 10 parking spaces (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,{'ID': '61_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},Where a new <e1>building</e1> which is not a residential building or a mixed-use building has more than 10 parking spaces (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be <e2>installed in a minimum of one fifth of the total number of remaining parking spaces</e2>.,none,annotated
+81f14fc1-af5d-45e8-8725-94d2510e4701_2,,,"A dwelling that is intended for service housing or supported housing of a person with mobility and functional impairment shall, irrespective of the number of storeys in the building, have a turning space with a <e1>location</e1> of at least <e2>100</e2> in the hallway and kitchen.",greater-equal,synthetic
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_3,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for <e1>cold side</e1> 1 and <e2>50 m</e2> if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",equal,synthetic
+5fa7daca-cb50-4397-a736-617e52d30187,"If efficiencies at below 30% are required and unavailable, the boiler efficiency may be taken as equal to that at 30% load.",{'ID': '246_UK_DocM_V2_AccessAndUseOfBuildings'},"If efficiencies at below 30% are required and unavailable, the <e1>boiler efficiency</e1> may be taken as equal to that at <e2>30% load</e2>.",equal,annotated
+e8340500-38b6-461b-b00d-d3aa44ac1f0b_3,,,The <e1>air tightness</e1> of the water available from the hot water system may not exceed <e2>3</e2>.,less-equal,synthetic
+fac44f87-4eb9-4f56-998c-74efa9512309,"If air barriers or vapour barriers have been used in the structure, the seams, edges and penetrations must be tight.",{'ID': '106_Finnish_Health-Humidity'},"If air barriers or <e1>vapour barriers</e1> have been used in the <e2>structure</e2>, the seams, edges and penetrations must be tight.",part-of,annotated
+e3b85ad6-6132-40d7-86f8-3cc5d44eb12c_1,,,<e1>two years</e1> <e2>driveway</e2> should be close to an accessible bathroom suitable for a wheelchair user.,equal,synthetic
+f5a71c7b-e852-40f2-8f88-91cda7902a7e_5,,,"If a new building has a space heating or airconditioning system with an <e1>cross fall</e1> greater than <e2>1 in 40</e2>, a building automation and control system should be installed.",greater,synthetic
+5ca6b3d3-fd21-4cc1-8dd8-185268db6615,The doorset should be manufactured from solid or laminated timber with a minimum density of 600kg/m3.,{'ID': '26_UK_DocQ_Security_Dwellings'},The doorset should be manufactured from <e1>solid</e1> or laminated <e2>timber</e2> with a minimum density of 600kg/m3.,selection,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",{'ID': '83_Finnish_SafetyOfUse'},"The free opening of the vertical hatch or <e1>window</e1> of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the sum of these must be at least <e2>1,500 millimetres</e2>.",none,annotated
+7e34700e-92de-4b00-a820-f4085a2e186c_8,,,"If the <e1>lengths</e1> between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than <e2>EI 15</e2>, the wall in question must be class EI 15.",less,synthetic
+6e5e61dd-039d-4079-9c3f-f52fc12efefb,For continuing horizontal structures the loaded area shall be calculated span by span.,{'ID': '12_Finnish_StabilityOfStructures'},For continuing horizontal structures the <e1>loaded area</e1> shall be <e2>calculated span by span</e2>.,necessity,annotated
+d5e2fb3e-df0c-48bd-8a09-734822ff086d,"For emergency repairs, if it is not possible to notify the building control body in advance, the building control body should be notified as soon as possible.",{'ID': '4_UK_DocF_V1_Ventilation'},"For emergency repairs, if it is not possible to notify the building control body in advance, the <e1>building control body</e1> should be <e2>notified as soon as possible</e2>.",necessity,annotated
+0096a3bf-ac16-4a75-adf9-8c3f4a9b8610_1,,,The smaller <e1>sizes</e1> of each panel which can be either the width or height of the panel should be <e2>50 m2</e2> or less.,less-equal,synthetic
+f6add908-4d45-4b3e-83a6-369f6c36c037_8,,,"Door rails, stiles and muntins should be at least <e1>proportion</e1> <e2>operation</e2>.",greater-equal,synthetic
+a387fcb8-ead2-4094-9be9-72d783468b33,"If the area of windows, roof windows, rooflights and doors exceeds 25 of the total floor area of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",{'ID': '422_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If the area of windows, roof windows, rooflights and doors exceeds 25 of the total floor area of the <e1>dwelling</e1>, compensating measures should be <e2>taken to improve the energy efficiency of the dwelling</e2>.",none,annotated
+45adb0b6-63ee-4f42-b6a3-8fc396221c67,The depth of the insulation plus any required air gap should be at least to the depth of the rafters.,{'ID': '128_UK_DocL_V1_ConsrvationOfFuelAndPower'},The depth of the <e1>insulation</e1> plus any required air gap should be at least to the <e2>depth</e2> of the rafters.,none,annotated
+fb5d3054-4911-4049-ba09-1c3e80f9c07c_8,,,"The tread of steps in uncovered or unheated outdoor staircases must be no less than 390 millimetres, and the <e1>instantaneous carbon monoxide concentration</e1> may be no more than <e2>30% load</e2>.",less-equal,synthetic
+c952db0f-b605-4335-8d56-97fc339ad5ba_10,,,All <e1>280mm</e1> <e2>Voids</e2> of the installation and commissioning checklist should be completed.,equal,synthetic
+61016afd-5449-4b1a-8fe5-86705f07d817,Products to be used in the water system shall be suitable for conveying household water.,{'ID': '55_Finnish_Health-WaterAndSewerage'},<e1>Products</e1> to be used in the <e2>water system</e2> shall be suitable for conveying household water.,part-of,annotated
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3_7,,,"Where the <e1>flow rate</e1> of installing only cable routes is more than <e2>16/01/2023 00:00</e2> of the total cost of the major renovation, there is no requirement to install either electric vehicle charge points or cable routes.",greater,synthetic
+7e34700e-92de-4b00-a820-f4085a2e186c_8,,,"If the free gap between facing walls of adjacent glazed balconies or the <e1>design temperature difference</e1> of the wall to the window of an adjacent fire compartment is less than <e2>2.2 metres</e2>, the wall in question must be class EI 15.",less,synthetic
+0d5f23b0-8423-4528-95bd-179fe81c75df,A building and its environment must be lit in a way that enables safe use and servicing.,{'ID': '62_Finnish_SafetyOfUse'},A <e1>building</e1> and its environment must be <e2>lit</e2> in a way that enables safe use and servicing.,necessity,annotated
+cf35d4a4-3170-421b-9be1-b68d928eed1d_1,,,"A roof with a <e1>stairs</e1> greater than <e2>0.7 metres</e2> must be constructed making appropriate use of walkways, roof ladders, safety ladders, roof stairs, roof treads and foot rails.",greater,synthetic
+825053cb-af5d-43a9-b59b-e2a5ae78ea73,The total number of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the number of dwellings in the residential building; b. the number of associated parking spaces.,{'ID': '59_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},The <e1>total number</e1> of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the <e2>number</e2> of dwellings in the residential building; b. the number of associated parking spaces.,greater,annotated
+06c2e0f7-69c8-47ec-bf31-9902ae9df7cf,"Provision shall be made for any windows, skylights, or any transparent or translucent walls, ceilings or roofs to be safely accessible for cleaning.",{'ID': '109_UK_DocK_ProtectionFromFalling'},"Provision shall be made for any windows, skylights, or any transparent or translucent walls, <e1>ceilings</e1> or roofs to <e2>be safely accessible for cleaning</e2>.",necessity,annotated
+a235c68f-ae44-4770-b005-4e9d7b659eb7_6,,,"All cavity walls should have leaves at least <e1>1,000 millimetres</e1> <e2>exposure coefficient</e2> and cavities at least 50mm wide.",greater-equal,synthetic
+1ebce0c9-705c-47ee-8429-e83cfbed72db,"All walls, ducts and boxings to every WC/cloakroom, bath and shower room are strong enough to support grab rails, seats and other adaptations that could impose a load of 1.5kN/m2.",{'ID': '103_UK_DocM_V1_AccessAndUseOfBuildings'},"All walls, ducts and boxings to every WC/cloakroom, <e1>bath</e1> and <e2>shower room</e2> are strong enough to support grab rails, seats and other adaptations that could impose a load of 1.5kN/m2.",none,annotated
+bed3cb74-fdd3-4888-80ab-b416d1b060ad,"For systems that have the ability to use free cooling or heat recovery, the SEER should be derived for the specific application, including free cooling or heat recovery elements.",{'ID': '282_UK_DocM_V2_AccessAndUseOfBuildings'},"For systems that have the ability to use free cooling or heat recovery, the <e1>SEER</e1> should be <e2>derived for the specific application, including free cooling or heat recovery elements</e2>.",necessity,annotated
+8b1482fe-5e9d-4b44-9157-a8de35c65ba9,"If an exposed facade is close to an area of sustained and loud noise (e.g. a main road), then a noise-attenuating background ventilator should be fitted.",{'ID': '86_UK_DocF_V1_Ventilation'},"If an exposed <e1>facade</e1> is <e2>close to an area of sustained and loud noise</e2> (e.g. a main road), then a noise-attenuating background ventilator should be fitted.",selection,annotated
+6414854d-01f9-481f-a7f4-c4581e48d8b1_1,,,Special safety features are not necessary if the <e1>fasteners</e1> is not more than <e2>20 litres per second</e2> long.,less-equal,synthetic
+45adb0b6-63ee-4f42-b6a3-8fc396221c67,The depth of the insulation plus any required air gap should be at least to the depth of the rafters.,{'ID': '128_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>depth</e1> of the insulation plus any required air gap should be at least to the <e2>depth</e2> of the rafters.,greater-equal,annotated
+e32bbb47-c826-40c1-8ea4-8c32353d3fd2,There shall be adequate means of ventilation provided for people in the building.,{'ID': '15_UK_DocF_V1_Ventilation'},There shall be adequate means of <e1>ventilation</e1> <e2>provided for people in the building</e2>.,selection,annotated
+5577528f-8fa0-4ca3-96f6-ea418091cb86,The side edges of stairs and landings must be fitted with a raised camber to prevent slipping over the edge if a cube measuring more than 50 millimetres in width is able to pass through the opening between the plane level and the handrail or wall.,{'ID': '32_Finnish_SafetyOfUse'},The side edges of stairs and landings must be fitted with a raised camber to prevent slipping over the edge if a <e1>cube</e1> measuring more than 50 millimetres in width is <e2>able to pass through the opening between the plane level and the handrail or wall</e2>.,necessity,annotated
+a922fe4e-30c9-4fef-a442-27459b959914,Vertical service pipes shall be equipped with mechanical or structural leak detectors at each floor if the service pipes are not visible.,{'ID': '82_Finnish_Health-WaterAndSewerage'},Vertical service pipes shall be equipped with mechanical or structural leak detectors at <e1>each</e1> <e2>floor</e2> if the service pipes are not visible.,none,annotated
+4abb3268-3ba6-47e8-a8b7-4676dbaa9a16,"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide all means of escape routes with a minimum clear headroom of 2m, except in doorways.",{'ID': '28_UK_DocK_ProtectionFromFalling'},"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide all means of escape routes with a minimum <e1>clear</e1> headroom of <e2>2m</e2>, except in doorways.",none,annotated
+2ca092ec-4425-4552-a389-fd0dadfbd154_3,,,NOTE: A floor level with a <e1>surfaces</e1> of <e2>20 degrees Celsius</e2> or steeper should be designed as a ramp.,greater-equal,synthetic
+ac2db7e5-ea0b-4a14-9623-eba6300272a7,A new dwelling must be built to a minimum standard of total energy performance.,{'ID': '46_UK_DocL_V1_ConsrvationOfFuelAndPower'},A <e1>new</e1> <e2>dwelling</e2> must be built to a minimum standard of total energy performance.,selection,annotated
+66249fda-33bf-4d93-8bf9-53fb82ad0e95,"The driveway and parking area at a plot or building site must be separated from pedestrian, play and recreation areas.",{'ID': '87_Finnish_SafetyOfUse'},"The <e1>driveway</e1> and parking area at a plot or building site must be <e2>separated from pedestrian, play and recreation areas</e2>.",necessity,annotated
+ed2cca4a-50f7-470d-9752-dd8722385a24,"In dwellings and other premises that are used by children, restrictors must be installed on windows and other openings where there may be a danger of falling, and these must be such that they limit the easy opening of the window to 100 millimetres.",{'ID': '80_Finnish_SafetyOfUse'},"In <e1>dwellings</e1> and other premises that are used by children, restrictors must be installed on <e2>windows</e2> and other openings where there may be a danger of falling, and these must be such that they limit the easy opening of the window to 100 millimetres.",part-of,annotated
+d504fd87-d13d-4936-9d7a-71d17954760d_2,,,The <e1>maintained</e1> of the steps in an exit may be no more than <e2>50</e2>.,less-equal,synthetic
+4094b859-b3b4-4035-94cd-8cf47ccbd801_0,,,The <e1>depth</e1> is at least <e2>50</e2>.,greater-equal,synthetic
+5869233a-4fc0-48bf-9007-2b0c9a169fef,"A building shall, if its size, number of storeys or an intended purpose of a premises within the building so requires, be divided into fire compartments in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",{'ID': '100_Finnish_FireSafety'},"A building shall, if its size, number of storeys or an <e1>intended purpose</e1> of a premises within the building so requires, be divided into fire compartments in order to <e2>restrict the spread of fire and smoke</e2>, to provide safe evacuation and to facilitate rescue and extinguishing measures.",none,annotated
+89811586-c819-4eb5-99f5-c4fcefdb9520,Fixed or linked seats must be arranged as rows of seating with an access route on the side of the rows.,{'ID': '107_Finnish_SafetyOfUse'},<e1>Fixed</e1> or linked <e2>seats</e2> must be arranged as rows of seating with an access route on the side of the rows.,selection,annotated
+992e8f11-81ac-4d2f-b7d1-60e46b4b7261,Wheelchair accessible dwellings must also provide both a level access shower and a bath.,{'ID': '108_UK_DocM_V1_AccessAndUseOfBuildings'},<e1>Wheelchair accessible</e1> <e2>dwellings</e2> must also provide both a level access shower and a bath.,selection,annotated
+511c1a7f-08b9-48ec-aea6-9b749fdf31a1,"A non-residential building shall, considering the intended use and functional units of the building and distances in the building, have an adequate number of appropriately located toilet facilities which are suitable for users of wheelchairs and walking frames with wheels.",{'ID': '51_Finnish_Accessibility'},"A non-residential building shall, considering the intended use and functional units of the building and distances in the building, have an adequate number of appropriately located <e1>toilet facilities</e1> which are <e2>suitable for users of wheelchairs and walking frames with wheels</e2>.",selection,annotated
+fdd9e41e-20a5-4f5b-9dae-91653467c3ec,Multiple cooling units should be provided with controls that ensure that the combined plant operates in its most efficient modes.,{'ID': '275_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Multiple</e1> <e2>cooling units</e2> should be provided with controls that ensure that the combined plant operates in its most efficient modes.,selection,annotated
+eeb4239f-3819-475c-ad20-756bed80c4ff_9,,,"In reference heat loss calculations, the value used as the <e1>one side</e1> of the buildings ventilation system shall be <e2>20 degrees Celsius</e2>.",equal,synthetic
+52de82bc-2c00-4500-81ec-a46781a8e4e7,Automatic control of input charge should be provided.,{'ID': '279_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Automatic</e1> <e2>control</e2> of input charge should be provided.,selection,annotated
+a0c838b5-5fe2-4b52-abe1-432804c2c8aa_2,,,"A <e1>one-hour  A-weighted  equivalent continuous sound level of impulsive, narrow-band or low-frequency noise</e1> of 21 C shall be used as the <e2>steps</e2> for room temperature during the heating season.",equal,synthetic
+d0927095-9e43-4ce4-a740-d5df69dc1dc3,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",{'ID': '84_Finnish_Health-IndoorClimateAndVentilation'},"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the <e1>combined</e1> <e2>air flow</e2>, the combined air flow is classified under category 2.",selection,annotated
+ef4f54b6-1099-4404-9fa2-d0c0d5e55543_0,,,The <e1>Level differences</e1> must not exceed the individual dwellings <e2>heat emission capacity</e2>.,less-equal,synthetic
+54da8684-242a-4a73-8ce5-ee908a038299,"Corridors and passageways should be wide enough to allow people with buggies, people carrying cases or people on crutches to pass others on the access route.",{'ID': '96_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Corridors</e1> and passageways should be <e2>wide enough to allow people with buggies, people carrying cases or people on crutches to pass others on the access route</e2>.",necessity,annotated
+74002ed3-548e-4e2f-8835-be76e643c67d,NOTE 2: Double doors effectively provide nibs where each leaf is at least 300mm wide.,{'ID': '51_UK_DocM_V1_AccessAndUseOfBuildings'},NOTE 2: Double doors effectively provide nibs where each leaf is at least <e1>300mm</e1> <e2>wide</e2>.,greater-equal,annotated
+7e369e4c-7768-4a7a-bd9c-41e2aa037b43,The air flows shall be designed so that the average carbon monoxide concentration in a parking garage for motor vehicles during the hour of use assessed as the most critical does not exceed 35 mg/m3 (30 ppm).,{'ID': '61_Finnish_Health-IndoorClimateAndVentilation'},The air flows shall be <e1>designed</e1> so that the average carbon monoxide concentration in a <e2>parking garage</e2> for motor vehicles during the hour of use assessed as the most critical does not exceed 35 mg/m3 (30 ppm).,none,annotated
+baee716c-b8c2-4500-b4de-63fa11f007b1_4,,,A minimum of one in <e1>eight per cent</e1> of the remaining <e2>building control body</e2> must have access to cable routes.,equal,synthetic
+b63dcef6-1840-4e9e-ad51-f8fc481fe856,"The wall ties should have a horizontal spacing of 900mm and a vertical spacing of 450mm, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",{'ID': '36_UK_DocA_Structure'},"The wall ties should have a <e1>horizontal spacing</e1> of 900mm and a vertical spacing of 450mm, or alternatively should be <e2>spaced</e2> such that the number of wall ties per square metre is not less than 2.5 ties/m2.",none,annotated
+f7935bb4-9e5f-4e91-bbf1-54e45c1ef24c_10,,,A building with a <e1>from the top and bottom corners of the door</e1> exceeding <e2>1400mm</e2> must be equipped with anchoring structures for safety lines.,greater,synthetic
+984c252b-74f4-4d85-9080-1c8ae1851eca_1,,,"If performance requires thicker glass to be used, an equivalent window unit with <e1>output</e1> (<e2>44mm</e2>) glazing should be shown to meet the required standard.",equal,synthetic
+61016afd-5449-4b1a-8fe5-86705f07d817,Products to be used in the water system shall be suitable for conveying household water.,{'ID': '55_Finnish_Health-WaterAndSewerage'},<e1>Products</e1> to be used in the water system shall be <e2>suitable for conveying household water</e2>.,necessity,annotated
+0cafda73-ee3a-4a99-a224-2d142de63618,"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",{'ID': '238_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a wet heating system is either: a. newly installed b. fully replaced in an <e1>existing</e1> <e2>building</e2>, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",selection,annotated
+5e7d4831-4ec8-48f9-9e60-0422fcc1eae4_8,,,"When replacing an existing system, the <e1>illuminance</e1> of the new system should be no less than <e2>capacity</e2> of the existing system, except where a smaller system can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",greater-equal,synthetic
+ec2e84a5-89bc-4c16-9a55-1965efd13981,"Wall insulation should be installed to the top of the wall plate; in some places, such as the eaves, this may be above the cavity closure or barrier.",{'ID': '167_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Wall insulation should be installed to the top of the wall plate; in some <e1>places</e1>, such as the eaves, <e2>this</e2> may be above the cavity closure or barrier.",part-of,annotated
+20518e80-6f7e-457f-8c5a-59fa4c0eb324_7,,,"When calculating the heat loss for a buildings design solution, the <e1>part</e1> shall be used as the value of the <e2>measures</e2> for the building envelope.",equal,synthetic
+7e34700e-92de-4b00-a820-f4085a2e186c_9,,,"If the free gap between facing walls of adjacent glazed balconies or the <e1>Signs</e1> of the wall to the window of an adjacent fire compartment is less than <e2>400mm</e2>, the wall in question must be class EI 15.",less,synthetic
+ae098b28-f01d-44df-b601-b7ac7631101d,"On stairs and ramps, a handrail must be installed for the entire length and on both sides of the structure.",{'ID': '54_Finnish_SafetyOfUse'},"On stairs and <e1>ramps</e1>, a handrail must be installed for the entire length and on both sides of the <e2>structure</e2>.",part-of,annotated
+9f5fe460-cae1-4653-a951-38e31f3ed15d,"Any restrictors placed on windows used as emergency exits must, however, be easily releasable by an adult.",{'ID': '81_Finnish_SafetyOfUse'},"Any <e1>restrictors</e1> placed on <e2>windows</e2> used as emergency exits must, however, be easily releasable by an adult.",part-of,annotated
+d6a2b6b7-57d2-449d-89f5-56d3df4755e2,Any radiator or towel rail should be clear of all access zones.,{'ID': '56_UK_DocM_V1_AccessAndUseOfBuildings'},Any radiator or <e1>towel rail</e1> should be <e2>clear of all access zones</e2>.,necessity,annotated
+ca1e0369-2dfe-4cf2-8194-87f72ee5a633,"Vertical, horizontal and slinky ground arrays in particular should be flushed in both directions.",{'ID': '385_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Vertical, horizontal and <e1>slinky</e1> <e2>ground arrays</e2> in particular should be flushed in both directions.",selection,annotated
+92db0f65-8f4f-45ea-9469-9033a7e4ea5e,The photographs should be made available to the energy assessor and the building control body.,{'ID': '478_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>photographs</e1> should be <e2>made available to the energy assessor and the building control body</e2>.,necessity,annotated
+0ea1e862-2434-4fc8-97a2-b076c992ef20_8,,,"The <e1>U-value</e1> of an exit must be at least <e2>(16.66 8.33 V0.4)/(1000 24)</e2> and its free height must be at least 2,100 millimetres.",greater-equal,synthetic
+baee716c-b8c2-4500-b4de-63fa11f007b1_1,,,A minimum of <e1>13l/s</e1> in five of the remaining <e2>space heating systems</e2> must have access to cable routes.,greater-equal,synthetic
+b8365796-12c1-47c1-9682-ff6131a75f21,"The various enduse categories, such as heating, lighting and cooling, should be submetered in such a way that at least 90 of the annual energy consumption of each fuel can be assigned to an enduse.",{'ID': '227_UK_DocM_V2_AccessAndUseOfBuildings'},"The various <e1>enduse categories</e1>, such as heating, lighting and <e2>cooling</e2>, should be submetered in such a way that at least 90 of the annual energy consumption of each fuel can be assigned to an enduse.",selection,annotated
+7d877df3-9aa7-4dff-a64d-5356a66c944d_11,,,"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a <e1>Extract</e1> exceeding <e2>450mm</e2> and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",greater,synthetic
+84cd76d7-e5d0-4f39-94bc-0236c65d533a_10,,,"in residential buildings of not more than two storeys, one exit of no less than <e1>4</e1> in <e2>heat emission capacity</e2> is permitted.",greater-equal,synthetic
+825053cb-af5d-43a9-b59b-e2a5ae78ea73_1,,,The <e1>sections</e1> of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the <e2>glare and reflections</e2> of dwellings in the residential building; b. the number of associated parking spaces.,greater,synthetic
+53e31e26-a39b-4047-a86e-bdb8021413e8,Window handles on windows that open outwards are not more than 650mm from the inside face of the wall when the window is at its maximum openable angle.,{'ID': '84_UK_DocO_Overheating'},<e1>Window handles</e1> on windows that open outwards are not more than 650mm <e2>from the inside face of the wall</e2> when the window is at its maximum openable angle.,part-of,annotated
+75c60084-6878-472d-8694-e8739e0dd76c_5,,,The width of access routes in assembly areas with a <e1>output</e1> of <e2>28 metres</e2> must be at least 900 millimetres.,equal,synthetic
+49c6fd15-70a9-4733-8de8-8dd2fe49fe0a,"If renewable technology such as a wind turbine or photovoltaic array is replaced, the new system should have an electrical output that is at least the same as that of the original installation.",{'ID': '231_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If renewable technology such as a <e1>wind turbine</e1> or photovoltaic array is replaced, the new system should have an <e2>electrical output</e2> that is at least the same as that of the original installation.",none,annotated
+493ec553-7761-4d1e-aa98-05d925ddf955_6,,,The <e1>flushing</e1> of a horizontal hatch must be at least <e2>1800mm</e2>.,greater-equal,synthetic
+7d35f4c4-fa65-4d68-a974-f54386ca8aee_5,,,"However, a horizontal <e1>electrical output</e1> in a protective part must be no higher than <e2>2,100 millimetres</e2>.",less-equal,synthetic
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_8,,,Skirtings totalling up to 50mm total thickness and shallow projecting <e1>letter</e1> or casings above <e2>21 C</e2> may be discounted when measuring clear width.,greater,synthetic
+29232335-402c-4ed9-af74-fd093ac22e28_7,,,The natural or mechanical ventilation system of a building shall be strong and its air-tightness shall be at least <e1>height</e1> <e2>4</e2>.,greater-equal,synthetic
+4a82f789-a98a-4379-9b81-2a20cfba6c87,"If the internal ties must be centred on the supporting line, the minimum value of the tie force, 70 kN, will also be applied to internal ties.",{'ID': '179_Finnish_StabilityOfStructures'},"If the internal ties must be centred on the supporting line, the minimum value of the tie force, 70 kN, will also be applied to <e1>internal</e1> <e2>ties</e2>.",selection,annotated
+a8b3e54e-902c-4502-99a2-8c41d46f1416_5,,,"If there are more than <e1>three metres</e1> <e2>CO2 measurements</e2> in a space, they must be linked to one another in at least four groups, unless the chairs are placed around tables.",greater,synthetic
+8cef7dc5-2d76-4dd8-80c5-6861b11a8f6f_9,,,"Where the work concerns a building containing more than <e1>44mm</e1> <e2>those</e2>, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",greater,synthetic
+d099bcfd-6f29-4146-a72f-189db5e03dd4,"If waste water cannot be conveyed from the drainage points of a building with gravity unloading via a gradient sewer, the waste water shall be pumped.",{'ID': '128_Finnish_Health-WaterAndSewerage'},"If <e1>waste water</e1> <e2>cannot be conveyed from the drainage points of a building with gravity unloading via a gradient sewer</e2>, the waste water shall be pumped.",selection,annotated
+45adb0b6-63ee-4f42-b6a3-8fc396221c67,The depth of the insulation plus any required air gap should be at least to the depth of the rafters.,{'ID': '128_UK_DocL_V1_ConsrvationOfFuelAndPower'},The depth of the <e1>insulation</e1> plus any <e2>required</e2> air gap should be at least to the depth of the rafters.,none,annotated
+0da52584-1b37-48b5-840f-3795ae695275,the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,{'ID': '119_UK_DocM_V2_AccessAndUseOfBuildings'},the minimum clear <e1>dimensions</e1> of the platform are: 1100mm wide and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is <e2>being made for an accompanied wheelchair user</e2>.,none,annotated
+72d7716f-7e3e-442c-9e42-14d4b19e18e3_9,,,A <e1>thermal elements</e1> that is being connected to a new building should not have a <e2>heat emission capacity</e2> for delivered heat to the building which is greater than 0.350kgCO2/kWh.,not-part-of,synthetic
+baee716c-b8c2-4500-b4de-63fa11f007b1,A minimum of one in five of the remaining parking spaces must have access to cable routes.,{'ID': '83_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},A minimum of <e1>one</e1> in five of the remaining <e2>parking spaces</e2> must have access to cable routes.,greater-equal,annotated
+b4754f3a-0a30-40fd-9f90-2e3d9e30d2a6,Fixed building services must be commissioned to ensure that they use no more fuel and power than is reasonable in the circumstances.,{'ID': '371_UK_DocL_V1_ConsrvationOfFuelAndPower'},Fixed <e1>building services</e1> must be <e2>commissioned to ensure that they use no more fuel and power than is reasonable in the circumstances</e2>.,necessity,annotated
+9b329413-b6d6-4953-9b34-c82d3a2e9c44,"Before a new heating appliance is installed, all central heating and primary hot water circuits should be thoroughly cleaned and flushed out.",{'ID': '216_UK_DocM_V2_AccessAndUseOfBuildings'},"Before a new <e1>heating appliance</e1> is installed, all central heating and primary hot water circuits should be <e2>thoroughly cleaned and flushed out</e2>.",none,annotated
+8207751f-13b8-4fe3-9bfe-4423093d4905,A  building  with  dwellings  or  accommodation  or  patient  rooms  shall  be  designed  and implemented so that the reverberation time of the staircase and exit route is no more than 1.3 seconds.,{'ID': '26_Finnish_AcousticEnvironment'},A <e1>building</e1> with dwellings or <e2>accommodation</e2> or patient rooms shall be designed and implemented so that the reverberation time of the staircase and exit route is no more than 1.3 seconds.,part-of,annotated
+389c960b-525d-4f2e-9a2c-1805eb2dc20d_2,,,The full <e1>total floor area</e1> under a stair that forms part of the storage provision should be counted as <e2>200 Watts per room</e2>.,equal,synthetic
+9d522aad-d404-4a57-83f9-474c95932b9e,Handrails should be spaced away from the wall and rigidly supported in a way that avoids impeding finger grip.,{'ID': '57_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Handrails</e1> should be spaced away from the wall and <e2>rigidly supported in a way that avoids impeding finger grip</e2>.,necessity,annotated
+0ea1e862-2434-4fc8-97a2-b076c992ef20_9,,,"The width of an exit must be at least 1,200 millimetres and its free <e1>locations</e1> must be at least <e2>0.5 kN/m2</e2>.",greater-equal,synthetic
+85745724-aa09-4cdd-ad17-3c50ea2b99a1,"Where sanitary facilities are wheelchair accessible, basins and sinks should be wall hung (typically with their rim 770-850mm above finished floor level) and the clear zone beneath basins, services and pedestals is maximised to enable wheelchair users to approach.",{'ID': '105_UK_DocM_V1_AccessAndUseOfBuildings'},"Where <e1>sanitary facilities</e1> are wheelchair accessible, basins and sinks should be wall hung (typically with their rim 770-850mm above finished floor level) and the clear zone beneath basins, services and pedestals is <e2>maximised to enable wheelchair users to approach</e2>.",none,annotated
+6465e5b9-4c10-41ec-9839-3e7cb7114911,Programmable room thermostats with an override feature should be provided for all direct electric zones of the electric underfloor heating system.,{'ID': '314_UK_DocL_V1_ConsrvationOfFuelAndPower'},Programmable <e1>room thermostats</e1> <e2>with an override feature</e2> should be provided for all direct electric zones of the electric underfloor heating system.,selection,annotated
+a2f3a871-91d5-4777-95c9-4744792b3a69,"in an existing building, for the principal or main staff entrance or entrances to be accessible, an alternative accessible entrance should be provided.",{'ID': '61_UK_DocM_V2_AccessAndUseOfBuildings'},"in an existing building, for the <e1>principal</e1> or main staff <e2>entrance</e2> or entrances to be accessible, an alternative accessible entrance should be provided.",selection,annotated
+569c7958-b7d6-4b9c-9dd9-13307e95e59b_2,,,"For ducted systems that are served by fans with a <e1>total useful floor area</e1> greater than <e2>200 Watts per room</e2>, ductwork leakage tests should be carried out.",greater,synthetic
+5ca184fa-e100-4f97-957d-e37ae944786f,The cost of installing electric vehicle charge points and cable routes is not more than 7% of the total capital cost of the major renovation.,{'ID': '51_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},The cost of <e1>installing electric vehicle charge points and cable routes</e1> is not more than 7% of the <e2>total capital cost</e2> of the major renovation.,none,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479_1,,,Individual flights are: for <e1>level difference</e1> up to <e2>6mm</e2> not more than 10m long; for gradients up to 1:12 not more than 5m long.,less-equal,synthetic
+d796dece-45f6-4527-a151-c59b007e9028,"A safe and marked access route must be reserved for pedestrians in connection with vehicle traffic and goods transport routes, doors and gates in the yards of buildings other than single-family houses, if pedestrian traffic through them is necessary.",{'ID': '132_Finnish_SafetyOfUse'},"A safe and <e1>marked</e1> <e2>access route</e2> must be reserved for pedestrians in connection with vehicle traffic and goods transport routes, doors and gates in the yards of buildings other than single-family houses, if pedestrian traffic through them is necessary.",selection,annotated
+64695439-3458-4d43-8e7b-a2ba75075cea,"There must be safe and easily accessible, uninterrupted access routes to any chimneys, ventilation equipment and other building equipment and structural elements that are located on the roof of the building and that must be accessed regularly.",{'ID': '124_Finnish_SafetyOfUse'},"There must be safe and easily accessible, uninterrupted <e1>access routes</e1> to any chimneys, <e2>ventilation equipment</e2> and other building equipment and structural elements that are located on the roof of the building and that must be accessed regularly.",necessity,annotated
+7aceb502-0ee4-49d6-b9b1-0bed9d77d3fd,Combustion appliances must operate safely whether or not fans are running.,{'ID': '11_UK_DocF_V1_Ventilation'},<e1>Combustion appliances</e1> must <e2>operate safely</e2> whether or not fans are running.,necessity,annotated
+a1f91cfd-21f8-49a4-8468-746f49f4848e,"For a building that contains more than one dwelling for example a block of flats or a terrace of houses an average target primary energy rate, target emission rate and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",{'ID': '50_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For a building that contains more than <e1>one</e1> dwelling for example a block of flats or a terrace of houses an average <e2>target primary energy rate</e2>, target emission rate and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",none,annotated
+ed2cca4a-50f7-470d-9752-dd8722385a24,"In dwellings and other premises that are used by children, restrictors must be installed on windows and other openings where there may be a danger of falling, and these must be such that they limit the easy opening of the window to 100 millimetres.",{'ID': '80_Finnish_SafetyOfUse'},"In dwellings and other premises that are used by children, <e1>restrictors</e1> must be installed on windows and other openings where there may be a danger of falling, and these must be such that they <e2>limit the easy opening of the window to 100 millimetres</e2>.",none,annotated
+aa41a5d4-c0b1-4da7-84a0-5c2e2738654f,The total number of ventilators installed in the dwellings habitable rooms and kitchens should be at least the following: Five ventilators if the dwelling has more than one bedroom.,{'ID': '89_UK_DocF_V1_Ventilation'},The total number of ventilators installed in the <e1>dwellings</e1> <e2>habitable rooms</e2> and kitchens should be at least the following: Five ventilators if the dwelling has more than one bedroom.,part-of,annotated
+389c960b-525d-4f2e-9a2c-1805eb2dc20d_11,,,The full <e1>power input from controls</e1> under a stair that forms part of the storage provision should be counted as <e2>Five ventilators</e2>.,equal,synthetic
+cccbc1ea-27be-4d7b-b53c-3cb467a51020,"For heating and cooling systems in a new non-domestic building, or when a heat generator such as a boiler is replaced in an existing non-domestic building, each room should be provided with thermostatic room controls.",{'ID': '220_UK_DocM_V2_AccessAndUseOfBuildings'},"For heating and cooling systems in a new non-domestic building, or when a heat generator such as a boiler is replaced in an existing non-domestic building, each <e1>room</e1> should be provided with <e2>thermostatic room controls</e2>.",necessity,annotated
+ef4f54b6-1099-4404-9fa2-d0c0d5e55543_3,,,The <e1>travel</e1> must not exceed the individual dwellings <e2>control function</e2>.,less-equal,synthetic
+f3bd99b4-7ea5-4968-af10-3c133c0b5aa0_6,,,No individual flight has a <e1>depth</e1> of more than <e2>0.3W/m2</e2>.,less-equal,synthetic
+2c8d2bc3-cf23-48f8-b9c0-b90f150f9f93,"Any walls, doors and windows should be insulated and draught-proofed to at least the same extent as in the existing building.",{'ID': '426_UK_DocM_V2_AccessAndUseOfBuildings'},"Any walls, <e1>doors</e1> and windows should be insulated and <e2>draught-proofed</e2> to at least the same extent as in the existing building.",necessity,annotated
+54907849-c48f-4267-b5f0-fc7e9279da7c,"For existing dwellings, when carrying out work on an existing system, such as installing or replacing components (e.g. replacing a boiler but retaining the pipework and heat emitters), the energy performance of the new components should be assessed.",{'ID': '409_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For existing dwellings, when carrying out work on an existing system, such as installing or replacing components (e.g. replacing a boiler but retaining the pipework and heat emitters), the energy performance of the <e1>new</e1> <e2>components</e2> should be assessed.",selection,annotated
+09b2a395-5293-4b7d-82d4-5312482d59e9_4,,,"Door entry controls, where provided, are mounted 900-1000mm above finished ground level, and at least <e1>600mm</e1> <e2>means</e2> from any projecting corner.",greater-equal,synthetic
+8efb6108-e49e-4d64-a1e4-22e3f9128b17_2,,,"When calculating the reference heat loss of a building, the value of <e1>90mm</e1> shall be used as the <e2>installed generation capacity</e2> for the air leakage rate figure for the building envelope.",equal,synthetic
+3153d771-404e-4a54-ac05-ed1b75e37506_10,,,"Gangways should not be less than <e1>25mm</e1> <e2>total flow rate</e2> unless used by not more than 50 persons, in which case gangways should be a minimum of 900mm.",greater-equal,synthetic
+fa8a6d84-eb99-490e-8169-3c65353fb553,"For large roofs, where the smaller horizontal dimension of the roof is 50 m or more, and the topography is windswept, the value of the exposure coefficient shall be at least 1.",{'ID': '61_Finnish_StabilityOfStructures'},"For large roofs, where the smaller horizontal <e1>dimension</e1> of the <e2>roof</e2> is 50 m or more, and the topography is windswept, the value of the exposure coefficient shall be at least 1.",part-of,annotated
+a0c838b5-5fe2-4b52-abe1-432804c2c8aa,A temperature of 21 C shall be used as the design value for room temperature during the heating season.,{'ID': '33_Finnish_Health-IndoorClimateAndVentilation'},A <e1>temperature</e1> of <e2>21 C</e2> shall be used as the design value for room temperature during the heating season.,equal,annotated
+2ff58135-b89d-40d1-a145-51aad9e5a942_5,,,"The landing in front of the outside door shall be at least <e1>18 dm3/s</e1> <e2>design value</e2> and at least 1,500 millimetres long.",greater-equal,synthetic
+78d904cd-b605-43a6-b3a4-34c22f557123,"Instead, the dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate should be calculated as if the area covered by the pool were replaced with the equivalent area of floor with the same U-value as the pool surround.",{'ID': '84_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Instead, the dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate should be calculated as if the <e1>area</e1> <e2>covered by the pool</e2> were replaced with the equivalent area of floor with the same U-value as the pool surround.",selection,annotated
+7d552257-2212-4139-8d13-b982e0e7744f,"It would be beneficial if entrance doors to wheelchair-accessible bedrooms were powered opening, as this could avoid the need for the 300mm access space adjacent to the leading edge of the door.",{'ID': '143_UK_DocM_V2_AccessAndUseOfBuildings'},"It would be beneficial if <e1>entrance doors</e1> to wheelchair-accessible bedrooms were <e2>powered opening</e2>, as this could avoid the need for the 300mm access space adjacent to the leading edge of the door.",selection,annotated
+12e545d1-64f4-45c9-a520-5b8a003eba0a_6,,,"If the dwelling has more than <e1>20 degrees Celsius</e1> exposed <e2>bedroom</e2>, the area of background ventilators on each facade should be similar, to allow cross-ventilation.",greater,synthetic
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_2,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the <e1>total combined window area</e1> from these spaces does not exceed <e2>14 metres</e2> of the total air flow in the vertical duct.",less-equal,synthetic
+f4b90866-b477-4fe0-a96f-3d6e0d1bd2f6,The annual percentage of heat supplied from each heat source should be the same for each newly connected dwelling.,{'ID': '79_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>annual percentage of heat</e1> <e2>supplied from each heat source</e2> should be the same for each newly connected dwelling.,selection,annotated
+405a2082-beb9-4c5f-bc9f-d688b72e723b,Intermediate floors: floor-to-wall junctions should be detailed to ensure that insulation in the external wall is continuous.,{'ID': '162_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Intermediate</e1> floors: <e2>floor-to-wall junctions</e2> should be detailed to ensure that insulation in the external wall is continuous.,none,annotated
+86350df0-a40e-412b-a301-004524d56736,"For wet heating systems in new dwellings with a floor area of 150m2 or greater, a minimum of two independently controlled heating circuits should be provided.",{'ID': '246_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For wet heating systems in new dwellings with a floor area of 150m2 or greater, a minimum of two <e1>independently controlled</e1> <e2>heating circuits</e2> should be provided.",selection,annotated
+fb1da22f-8ddb-4399-b441-64dca68da9af_2,,,"If a lift or other device for moving between levels is installed in the exit of an existing building, the dwellings exit may be no less than <e1>two</e1> <e2>calculations</e2>.",greater-equal,synthetic
+48133b44-eac2-44e2-b2df-c52243e9f7ea,"NOTE: For example, if the total system output is made up of three equally sized boilers, at 15% of system output the lead boiler will be operating at 45% of its rated output with the other two boilers switched off.",{'ID': '244_UK_DocM_V2_AccessAndUseOfBuildings'},"NOTE: For example, if the total system output is <e1>made up of three equally sized boilers</e1>, at <e2>15%</e2> of system output the lead boiler will be operating at 45% of its rated output with the other two boilers switched off.",none,annotated
+01008f69-874b-443e-bcb2-2f5630280049,"If stairs are used only as an emergency exit and if they lead to spaces in a dwelling or accommodation facility other than those that are necessary for living, the riser may be no more than 220 millimetres and the tread must be no less than 220 millimetres.",{'ID': '24_Finnish_SafetyOfUse'},"If <e1>stairs</e1> are used only as an emergency exit and if they lead to spaces in a dwelling or accommodation facility other than those that are necessary for living, the <e2>riser</e2> may be no more than 220 millimetres and the tread must be no less than 220 millimetres.",part-of,annotated
+bf798097-bb99-42d0-a73f-8cebab8fbeb8,"In the entrance halls and other indoor areas of administrative, service and business premises and in assembly areas, the riser of the steps must be no more than 160 millimetres and the tread must be no less than 300 millimetres.",{'ID': '21_Finnish_SafetyOfUse'},"In the entrance halls and other <e1>indoor areas</e1> of administrative, service and business premises and in assembly areas, the riser of the <e2>steps</e2> must be no more than 160 millimetres and the tread must be no less than 300 millimetres.",part-of,annotated
+53bb982d-5260-4a69-a6dd-71e4f074e676_10,,,The <e1>total floor area</e1> of standing rows must be at least <e2>1</e2>.,greater-equal,synthetic
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_5,,,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the <e1>widened</e1> of these must be at least <e2>15mm</e2>.",greater-equal,synthetic
+8a692fe7-08ed-4b90-8b13-7ce2e29d37a2,"During this process, the heat pump (along with its accompanying pipework) should be isolated from the ground heat exchanger such that damage to the internal heat exchanger inside the heat pump is avoided.",{'ID': '386_UK_DocL_V1_ConsrvationOfFuelAndPower'},"During this process, the heat pump (along with its accompanying <e1>pipework</e1>) should be <e2>isolated from the ground heat exchanger such that damage to the internal heat exchanger inside the heat pump is avoided</e2>.",necessity,annotated
+1de9d3e5-dee3-42c9-b929-80b7936f1642,The lift shall provide access to the entrance level and each level with entry to a dwelling or a space serving the use of the building.,{'ID': '33_Finnish_Accessibility'},The lift shall provide access to the entrance level and each level with entry to a dwelling or a <e1>space</e1> <e2>serving the use of the building</e2>.,selection,annotated
+20609d43-016e-4314-9620-256f73f1c6ed,"The general ventilation rate for a new conservatory and, if necessary, adjoining rooms could be achieved using background ventilators.",{'ID': '160_UK_DocF_V1_Ventilation'},"The general <e1>ventilation rate</e1> for a new conservatory and, if necessary, adjoining rooms could be <e2>achieved using background ventilators</e2>.",necessity,annotated
+3c801d84-c59d-48ef-95b9-f711d22061d4,"The compartment should be fitted with support rails, and include a minimum activity space to accommodate people who use crutches, or otherwise have impaired leg movements.",{'ID': '167_UK_DocM_V2_AccessAndUseOfBuildings'},"The <e1>compartment</e1> should be fitted with support rails, and <e2>include a minimum activity space to accommodate people who use crutches, or otherwise have impaired leg movements</e2>.",necessity,annotated
+c2e0629d-350b-45b8-9e9e-d58be1780f12_10,,,"If the <e1>landings</e1> has no <e2>Roofs</e2>, it should be treated as having one bedroom when calculating the ventilation required for the purposes of meeting the ventilation standards.",not-part-of,synthetic
+2f8d4247-e53b-49ae-bd26-c4f1765eaee8_9,,,"Extract air of <e1>full width</e1> <e2>6m</e2>, 3 and 4 shall not be used as recirculation air.",equal,synthetic
+7e34700e-92de-4b00-a820-f4085a2e186c_9,,,"If the <e1>construction</e1> between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than <e2>7 mg/m3 (6 ppm)</e2>, the wall in question must be class EI 15.",less,synthetic
+9dd2a0f1-0ff9-4416-8abd-1e6589980ff4,"If the cross-sectional area of a mechanical ventilation systems air duct is designed to be greater than 0.06 m2, the outdoor air and exhaust air ducts shall be fitted with shutoff dampers that close automatically when the system shuts down.",{'ID': '100_Finnish_Health-IndoorClimateAndVentilation'},"If the cross-sectional area of a mechanical ventilation systems air duct is designed to be greater than 0.06 m2, the outdoor air and exhaust air ducts shall be fitted with <e1>shutoff dampers</e1> that <e2>close automatically when the system shuts down</e2>.",selection,annotated
+d504fd87-d13d-4936-9d7a-71d17954760d_11,,,The <e1>continuity</e1> of the steps in an exit may be no more than <e2>30</e2>.,less-equal,synthetic
+f5a71c7b-e852-40f2-8f88-91cda7902a7e,"If a new building has a space heating or airconditioning system with an effective rated output greater than 180kW, a building automation and control system should be installed.",{'ID': '319_UK_DocM_V2_AccessAndUseOfBuildings'},"If a <e1>new</e1> <e2>building</e2> has a space heating or airconditioning system with an effective rated output greater than 180kW, a building automation and control system should be installed.",selection,annotated
+7c74b365-6fdd-494d-9675-3ae036c55348,Ladders and other structural elements at emergency exits and service routes must be designed and constructed so that they can also be used in an emergency situation.,{'ID': '82_Finnish_SafetyOfUse'},Ladders and other structural elements at emergency exits and service routes must be <e1>designed and constructed</e1> so that they can also be <e2>used in an emergency situation</e2>.,selection,annotated
+81314489-dcd9-410f-9b15-595b87e7c8f9_9,,,"The resilient layer should be timber sheathing at least <e1>20C</e1> <e2>cost</e2>, expanded metal or a similar resilient material.",greater-equal,synthetic
+6414854d-01f9-481f-a7f4-c4581e48d8b1_5,,,Special safety features are not necessary if the <e1>Duct</e1> is not more than <e2>200 Watts per room</e2> long.,less-equal,synthetic
+716fa732-f3c7-43ad-a4e3-fff43a841018,The vehicle traffic area of a building and its courtyard must be safe and appropriate.,{'ID': '131_Finnish_SafetyOfUse'},The vehicle traffic area of a building and <e1>its</e1> courtyard must be safe and <e2>appropriate</e2>.,none,annotated
+4a82f789-a98a-4379-9b81-2a20cfba6c87,"If the internal ties must be centred on the supporting line, the minimum value of the tie force, 70 kN, will also be applied to internal ties.",{'ID': '179_Finnish_StabilityOfStructures'},"If the internal <e1>ties</e1> must be <e2>centred on the supporting line</e2>, the minimum value of the tie force, 70 kN, will also be applied to internal ties.",necessity,annotated
+7e34700e-92de-4b00-a820-f4085a2e186c,"If the free gap between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than 2 metres, the wall in question must be class EI 15.",{'ID': '135_Finnish_FireSafety'},"If the free gap between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than 2 metres, the wall in question must be <e1>class</e1> <e2>EI 15</e2>.",equal,annotated
+d04d6702-5170-4b50-9bda-7367a24e9322,"NOTE: The network distribution point could be in a cabinet, a box mounted on a wall or on a telegraph pole.",{'ID': '5_UK_DocR_V1_InfrastructureForElectircalCommunications'},"NOTE: The network distribution point could be in a <e1>cabinet</e1>, a <e2>box</e2> mounted on a wall or on a telegraph pole.",none,annotated
+7d7d55f1-b28d-4ce8-aec6-dd4dc0786ce8_2,,,"For sizes of cylinder not listed, the <e1>sewer</e1> from the cylinder should not exceed <e2>3.3m</e2>, where V is the volume in litres.",less-equal,synthetic
+4a82f789-a98a-4379-9b81-2a20cfba6c87_7,,,"If the internal ties must be centred on the supporting line, the minimum value of the <e1>span</e1>, <e2>2 metres</e2>, will also be applied to internal ties.",greater-equal,synthetic
+316c89ee-aa42-4e7a-9372-960cf25b3265,Extract ventilation may be by natural means or by mechanical means (e.g. by an extract fan or acentral system).,{'ID': '105_UK_DocF_V2_Ventilation'},Extract ventilation may be by natural <e1>means</e1> or by <e2>mechanical</e2> means (e.g. by an extract fan or acentral system).,selection,annotated
+a922fe4e-30c9-4fef-a442-27459b959914,Vertical service pipes shall be equipped with mechanical or structural leak detectors at each floor if the service pipes are not visible.,{'ID': '82_Finnish_Health-WaterAndSewerage'},Vertical <e1>service pipes</e1> shall be equipped with mechanical or structural leak detectors at each floor if the service pipes are <e2>not visible</e2>.,selection,annotated
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3_8,,,"Where the <e1>Geo-location</e1> of installing only cable routes is more than <e2>15mm</e2> of the total cost of the major renovation, there is no requirement to install either electric vehicle charge points or cable routes.",greater,synthetic
+19478a13-7457-4dd3-a394-744f826db7b0,"The handle to at least one window in the principal living area is 700-1000mm above floor level, unless fitted with a remote opening device that is within this height range.",{'ID': '127_UK_DocM_V1_AccessAndUseOfBuildings'},"The handle to at least one <e1>window</e1> in the principal <e2>living area</e2> is 700-1000mm above floor level, unless fitted with a remote opening device that is within this height range.",part-of,annotated
+5ca184fa-e100-4f97-957d-e37ae944786f,The cost of installing electric vehicle charge points and cable routes is not more than 7% of the total capital cost of the major renovation.,{'ID': '51_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},The cost of <e1>installing electric vehicle charge points and cable routes</e1> is not more than <e2>7%</e2> of the total capital cost of the major renovation.,none,annotated
+8421f806-70f2-46a9-a308-90a40da3541d_8,,,"Where the <e1>that</e1> of the approach, whether over its whole length or in part, is <e2>190 kN</e2> or steeper, that part of the approach should be designed as ramped access.",greater-equal,synthetic
+a86b58e8-046f-44b7-8e1b-00c876c8c647,"Parapets in categories A to E and panel parts of walls acting as parapets, as well as their fasteners, shall be designed to the concentrated load Qk = 0.3 kN acting on a random spot.",{'ID': '30_Finnish_StabilityOfStructures'},"Parapets in categories A to E and <e1>panel parts</e1> of <e2>walls</e2> acting as parapets, as well as their fasteners, shall be designed to the concentrated load Qk = 0.3 kN acting on a random spot.",part-of,annotated
+fb5d3054-4911-4049-ba09-1c3e80f9c07c_11,,,"The tread of steps in uncovered or unheated outdoor staircases must be no less than 390 millimetres, and the <e1>performance</e1> may be no more than <e2>150mm</e2>.",less-equal,synthetic
+09b2a395-5293-4b7d-82d4-5312482d59e9,"Door entry controls, where provided, are mounted 900-1000mm above finished ground level, and at least 300mm away from any projecting corner.",{'ID': '46_UK_DocM_V1_AccessAndUseOfBuildings'},"Door entry controls, where provided, are <e1>mounted</e1> 900-1000mm above finished ground level, and at least 300mm away from any <e2>projecting corner</e2>.",none,annotated
+a387fcb8-ead2-4094-9be9-72d783468b33,"If the area of windows, roof windows, rooflights and doors exceeds 25 of the total floor area of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",{'ID': '422_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If the <e1>area</e1> of windows, roof windows, rooflights and doors exceeds <e2>25</e2> of the total floor area of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",greater,annotated
+ed2cca4a-50f7-470d-9752-dd8722385a24,"In dwellings and other premises that are used by children, restrictors must be installed on windows and other openings where there may be a danger of falling, and these must be such that they limit the easy opening of the window to 100 millimetres.",{'ID': '80_Finnish_SafetyOfUse'},"In dwellings and other premises that are used by children, <e1>restrictors</e1> must be installed on <e2>windows</e2> and other openings where there may be a danger of falling, and these must be such that they limit the easy opening of the window to 100 millimetres.",necessity,annotated
+01d924bf-4a69-4eb8-b05e-ce993aee3d45_6,,,"Perimeter insulation should be continuous and have a minimum <e1>thresholds</e1> of <e2>1,000 millimetres</e2>.",greater-equal,synthetic
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_8,,,Skirtings totalling up to 50mm total thickness and shallow projecting ducts or <e1>Hot water pipework</e1> above <e2>56 metres</e2> may be discounted when measuring clear width.,greater,synthetic
+eeb4239f-3819-475c-ad20-756bed80c4ff_3,,,"In reference heat loss calculations, the value used as the <e1>Control</e1> of the buildings ventilation system shall be <e2>1100mm</e2>.",equal,synthetic
+20518e80-6f7e-457f-8c5a-59fa4c0eb324_6,,,"When calculating the heat loss for a buildings design solution, the <e1>sum total</e1> shall be used as the value of the <e2>atmosphere</e2> for the building envelope.",equal,synthetic
+ff3e8f86-1542-4f54-a776-cfdc8482bad7_7,,,The <e1>number of appliances</e1> of an air conditioner working in cooling mode should be a minimum of <e2>50mm</e2>.,greater-equal,synthetic
+05864826-21ef-4ae7-9af8-2aaeffc7267a_4,,,Modular and portable buildings with a planned service life of more than two years but with an <e1>air leakage rate figure</e1> in a single location of less than <e2>600kg/m3</e2> should be shown to comply with the energy efficiency requirements.,less,synthetic
+d0b6759e-deec-451d-bd7a-ec65b96048be_6,,,"extract air of <e1>atmosphere</e1> <e2>300mm</e2> shall be conducted through individual ducts, or common ducts serving spaces of the same type as regards level of air purity, to the outdoors, into a collection duct installed above the spaces it serves or into an extract air chamber.",equal,synthetic
+dd056285-1aa4-4c6d-94ac-b911458cb7ea,"Where any of the parking spaces for new buildings other than residential or mixed-use buildings are in a covered car park, the requirement to install an electric vehicle charge point should be met by installing a charge point in a parking space that is not within a covered car park.",{'ID': '70_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where any of the parking spaces for new buildings <e1>other than residential or mixed-use buildings</e1> are in a covered car park, the requirement <e2>to install an electric vehicle charge point</e2> should be met by installing a charge point in a parking space that is not within a covered car park.",none,annotated
+92f99822-6896-4ade-abbe-7598f8225b9e,"The information should be provided in a clear manner, for a non-technical audience.",{'ID': '93_UK_DocO_Overheating'},"The <e1>information</e1> should be provided in a clear manner, <e2>for a non-technical audience</e2>.",selection,annotated
+86831830-e7f0-4b90-aa27-dc0542b7ba4d_8,,,"If a residential block of flats does not have a lift, the stairs between floor levels must have natural light and at least <e1>two</e1> <e2>intended time of use</e2>.",greater-equal,synthetic
+f06f7ec1-3b83-4e1a-a421-b09589f2374c,"Provision shall be made to prevent any door or gate: (a) which slides or opens upwards, from falling onto any person; and (b) which is powered, from trapping any person.",{'ID': '114_UK_DocK_ProtectionFromFalling'},"Provision shall be made to prevent any door or gate: (a) <e1>which slides or opens upwards</e1>, <e2>from falling onto any person</e2>; and (b) which is powered, from trapping any person.",selection,annotated
+d0b6759e-deec-451d-bd7a-ec65b96048be_8,,,"extract air of <e1>standards</e1> <e2>55</e2> shall be conducted through individual ducts, or common ducts serving spaces of the same type as regards level of air purity, to the outdoors, into a collection duct installed above the spaces it serves or into an extract air chamber.",equal,synthetic
+457ecdc0-8247-4ad4-9beb-3b7a31cfa0fd,"All public areas, including lavatory accommodation, public telephones and external terraces should be accessible.",{'ID': '138_UK_DocM_V2_AccessAndUseOfBuildings'},"All public areas, including lavatory <e1>accommodation</e1>, <e2>public</e2> telephones and external terraces should be accessible.",none,annotated
+549fd984-e319-47d9-9a86-4ea7f4cbf508,The space between the air barrier and the insulation layer should be filled with solid material.,{'ID': '191_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>space</e1> between the air barrier and the insulation layer should be <e2>filled with solid material</e2>.,necessity,annotated
+26980508-105c-49db-8595-bf001a48d757_8,,,"In <e1>tiered terraces</e1> with no fixed <e2>Stairs</e2> or furnishings, the number of persons shall be calculated to be two persons per square metre.",not-part-of,synthetic
+6075de3c-d339-4ba4-9945-990480975615_1,,,"Where a kitchen and living room accommodation are not separate rooms (i.e. open plan), no fewer than <e1>50mm</e1> <e2>balcony</e2> of the same equivalent area as for other habitable rooms should be provided within the open-plan space.",greater-equal,synthetic
+a387fcb8-ead2-4094-9be9-72d783468b33_0,,,"If the <e1>combined dead,imposed and wind loads</e1> of windows, roof windows, rooflights and doors exceeds <e2>600mm</e2> of the total floor area of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",greater,synthetic
+9f5fe460-cae1-4653-a951-38e31f3ed15d,"Any restrictors placed on windows used as emergency exits must, however, be easily releasable by an adult.",{'ID': '81_Finnish_SafetyOfUse'},"Any <e1>restrictors</e1> placed on windows <e2>used as emergency exits</e2> must, however, be easily releasable by an adult.",none,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_1,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for <e1>extends</e1> <e2>200 m2</e2> and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",equal,synthetic
+cb522b91-f26f-460e-adee-1a7f59ba10c9,"For heat pump installations in which there are other heat sources available to the same building, each of these heat sources should be appropriately incorporated into a singular control system.",{'ID': '315_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For <e1>heat pump installations</e1> in which there are <e2>other</e2> heat sources available to the same building, each of these heat sources should be appropriately incorporated into a singular control system.",none,annotated
+67657794-a272-4ab2-9b19-df29e9d24844,Ground floors and external walls: the wall-to-floor junctions should be detailed to achieve continuity of insulation.,{'ID': '160_UK_DocL_V1_ConsrvationOfFuelAndPower'},Ground floors and <e1>external</e1> <e2>walls</e2>: the wall-to-floor junctions should be detailed to achieve continuity of insulation.,selection,annotated
+6a41a473-bd3c-4e38-a093-094b3fdae388,At least one in every five remaining parking spaces must be provided with cable routes.,{'ID': '68_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},At least one in every <e1>five</e1> remaining <e2>parking spaces</e2> must be provided with cable routes.,equal,annotated
+d5cb0429-ffef-43c5-9789-a3611c04446a,"The supports and fastening points of water pipes shall be such that neither heat expansion nor forces generated by water flow cause the pipes to shift, loosen, break or make disturbing noises.",{'ID': '89_Finnish_Health-WaterAndSewerage'},"The <e1>supports</e1> and fastening points of <e2>water pipes</e2> shall be such that neither heat expansion nor forces generated by water flow cause the pipes to shift, loosen, break or make disturbing noises.",part-of,annotated
+569c7958-b7d6-4b9c-9dd9-13307e95e59b_1,,,"For ducted systems that are served by fans with a <e1>energy efficiency</e1> greater than <e2>25mm</e2>, ductwork leakage tests should be carried out.",greater,synthetic
+8e8f4fb5-00b5-404f-89df-a07287984748_0,,,"In buildings with a <e1>building primary energy rate</e1> greater than <e2>300 millimetres</e2>, automatic meter reading and data collection facilities should be installed.",greater,synthetic
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_10,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for <e1>floor  plate areas</e1> 1 and <e2>280mm</e2> if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",equal,synthetic
+5ebe90af-93ee-4d92-96fd-44b674d5e1a5,Systems should be designed so that they can be commissioned to suitable ventilation rates so that spaces are not significantly over-ventilated.,{'ID': '335_UK_DocL_V1_ConsrvationOfFuelAndPower'},Systems should be <e1>designed</e1> so that <e2>they can be commissioned to suitable ventilation rates so that spaces are not significantly over-ventilated</e2>.,selection,annotated
+fa8a6d84-eb99-490e-8169-3c65353fb553_8,,,"For large roofs, where the smaller horizontal dimension of the roof is 50 m or more, and the topography is windswept, the value of the <e1>internal temperature</e1> shall be at least <e2>190 kN</e2>.",greater-equal,synthetic
+203faa23-7b71-47c9-a6e5-2333ac45389e_10,,,"The riser of the indoor steps of dwelling units and living quarters may be no more than 190 millimetres, and the <e1>inner surfaces</e1> must be no less than <e2>500kW</e2>.",greater-equal,synthetic
+31d635b2-1d32-49dd-a848-5b5acaf50128,"For existing dwellings, when installing a complete new or replacement system (e.g. replacing a heating system including the heating appliance, pipework and heat emitters), the energy performance of the whole system should be assessed.",{'ID': '407_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For existing dwellings, when <e1>installing a complete new or replacement system</e1> (e.g. replacing a heating system including the heating appliance, pipework and heat emitters), the energy performance of the whole <e2>system</e2> should be assessed.",none,annotated
+01008f69-874b-443e-bcb2-2f5630280049,"If stairs are used only as an emergency exit and if they lead to spaces in a dwelling or accommodation facility other than those that are necessary for living, the riser may be no more than 220 millimetres and the tread must be no less than 220 millimetres.",{'ID': '24_Finnish_SafetyOfUse'},"If <e1>stairs</e1> are used only as an emergency exit and if they lead to spaces in a dwelling or accommodation facility other than those that are necessary for living, the riser may be no more than 220 millimetres and the <e2>tread</e2> must be no less than 220 millimetres.",part-of,annotated
+77f993c6-dff1-4f9a-8f66-73221d3cbaff_5,,,"If the dwelling only has one habitable room, a minimum <e1>vicinity</e1> of <e2>15mm</e2> should be used.",greater-equal,synthetic
+d728a9c8-0302-4bd1-b69b-0daeefce30d1,"Where a service building has a reception or sales counter, there should be convenient access to it and part of it should be at a level suitable for a wheelchair user or a seated person.",{'ID': '84_UK_DocM_V2_AccessAndUseOfBuildings'},"Where a service building has a reception or sales counter, there should be convenient access to it and <e1>part</e1> of it should be <e2>at a level suitable for a wheelchair user or a seated person</e2>.",necessity,annotated
+c0a6d35c-cc20-428b-941d-c3e3e6365c74_10,,,"In a tier that is uninterrupted by cross-gangways, and where the <e1>widened</e1> exceeds <e2>500kW</e2>, use a maximum number of steps of 40.",greater,synthetic
+43e26628-8b62-4cc6-91e2-284335df1564_5,,,"In rooms used for sleeping or rest, the <e1>feasibility of installing high-efficiency alternative systems</e1> may not exceed <e2>40 degrees Celsius</e2>.",less-equal,synthetic
+4e8c5c50-44af-48f6-b959-e6f9b31afa1e_9,,,"If the planned time of use of a modular or portable building in a single location is less than two years, the only practical <e1>electric vehicle charge point</e1> may be <e2>boiler</e2>.",equal,synthetic
+89811586-c819-4eb5-99f5-c4fcefdb9520,Fixed or linked seats must be arranged as rows of seating with an access route on the side of the rows.,{'ID': '107_Finnish_SafetyOfUse'},Fixed or linked <e1>seats</e1> must be <e2>arranged as rows of seating with an access route on the side of the rows</e2>.,necessity,annotated
+993e54cc-49c3-43cb-995e-1a951c93c775,"When a warning sign is not posted, the areas shall be designed to an axle load Qk and also to an axle group load equal to 190 kN.",{'ID': '25_Finnish_StabilityOfStructures'},"When a warning sign is not posted, the <e1>areas</e1> shall be <e2>designed to an axle load Qk</e2> and also to an axle group load equal to 190 kN.",necessity,annotated
+fac44f87-4eb9-4f56-998c-74efa9512309,"If air barriers or vapour barriers have been used in the structure, the seams, edges and penetrations must be tight.",{'ID': '106_Finnish_Health-Humidity'},"If air barriers or vapour barriers have been used in the structure, the seams, <e1>edges</e1> and penetrations must be <e2>tight</e2>.",necessity,annotated
+3724fd47-22f7-432c-81a2-1abcb95c7df2_8,,,"The <e1>opening angle</e1> installed in a dwellings habitable rooms and kitchens should be no fewer than <e2>100mm</e2>, except in one bedroom properties, where there should be no fewer than four.",greater-equal,synthetic
+e43c1e88-be80-42d9-944e-1bf0f0f82479_2,,,Individual flights are: for <e1>free gap</e1> up to <e2>40</e2> not more than 10m long; for gradients up to 1:12 not more than 5m long.,less-equal,synthetic
+d3fc8c9b-c23a-4188-8723-369caa90453c,"The reference value for a building's total combined window area is 15 of the sum total of the floor  plate areas  of  the  buildings  storeys that  are  fully  or in  part  above  the  ground  but, however, at most 50 of the building's facade area.",{'ID': '124_Finnish_EnergyEfficiency'},"The reference value for a building's total combined window area is 15 of the <e1>sum total</e1> of the <e2>floor plate areas</e2> of the buildings storeys that are fully or in part above the ground but, however, at most 50 of the building's facade area.",part-of,annotated
+3724fd47-22f7-432c-81a2-1abcb95c7df2_5,,,"The total number of ventilators installed in a dwellings habitable rooms and kitchens should be no fewer than five, except in one bedroom <e1>Drains</e1>, where there should be no fewer than <e2>E 15</e2>.",greater-equal,synthetic
+37f01a2c-b944-45a2-a7f4-140d8c03d7ac_9,,,"After rebating, frame components should retain at least <e1>0.055555556</e1> of <e2>volume systems</e2>.",greater-equal,synthetic
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_3,,,Skirtings totalling up to <e1>1800mm</e1> <e2>total cost</e2> and shallow projecting ducts or casings above 1800mm may be discounted when measuring clear width.,less-equal,synthetic
+457ecdc0-8247-4ad4-9beb-3b7a31cfa0fd,"All public areas, including lavatory accommodation, public telephones and external terraces should be accessible.",{'ID': '138_UK_DocM_V2_AccessAndUseOfBuildings'},"All public areas, including lavatory accommodation, <e1>public</e1> telephones and <e2>external</e2> terraces should be accessible.",none,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",{'ID': '83_Finnish_SafetyOfUse'},"The free <e1>opening</e1> of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in <e2>width</e2>; however, the sum of these must be at least 1,500 millimetres.",part-of,annotated
+0096a3bf-ac16-4a75-adf9-8c3f4a9b8610_11,,,The smaller <e1>presence</e1> of each panel which can be either the width or height of the panel should be <e2>B</e2> or less.,less-equal,synthetic
+0cafda73-ee3a-4a99-a224-2d142de63618,"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",{'ID': '238_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a wet heating system is either: a. <e1>newly installed</e1> b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and <e2>emitters</e2> should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",none,annotated
+703e5c71-bd54-4267-acf4-fa7db1e70d49,"Any sound system in an auditorium, a restaurant, a conference facility, a facility for festive occasions, a teaching facility or other similar assembly facility or a public service facility shall have an induction loop or a similar sound transmission system.",{'ID': '67_Finnish_Accessibility'},"Any <e1>sound system</e1> in an auditorium, a restaurant, a conference facility, a <e2>facility for festive occasions</e2>, a teaching facility or other similar assembly facility or a public service facility shall have an induction loop or a similar sound transmission system.",part-of,annotated
+a1f91cfd-21f8-49a4-8468-746f49f4848e,"For a building that contains more than one dwelling for example a block of flats or a terrace of houses an average target primary energy rate, target emission rate and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",{'ID': '50_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For a building that contains more than one dwelling for example a block of flats or a terrace of houses an average <e1>target primary energy rate</e1>, target emission rate and target fabric energy efficiency rate may be <e2>calculated as an alternative to individual target rates for each dwelling</e2>.",necessity,annotated
+2afa8bba-b5ad-4e12-bc27-4beea3fd09b2_9,,,The normal relationship between the <e1>dimension</e1> of the rise and going is: <e2>five</e2> equals between 550mm and 700mm.,equal,synthetic
+a922fe4e-30c9-4fef-a442-27459b959914,Vertical service pipes shall be equipped with mechanical or structural leak detectors at each floor if the service pipes are not visible.,{'ID': '82_Finnish_Health-WaterAndSewerage'},Vertical service pipes shall be equipped with mechanical or structural leak detectors at each floor if the <e1>service pipes</e1> are <e2>not visible</e2>.,selection,annotated
+636bce88-fd3b-4e5a-9f6a-4aa0d3d1bfa4_4,,,"Where a new building contains more than <e1>900-1000mm</e1> <e2>supply terminals</e2>, a common access point for a gigabit-capable public electronic communications network is required as a part of the buildings gigabit-ready physical infrastructure.",greater,synthetic
+a387fcb8-ead2-4094-9be9-72d783468b33_2,,,"If the <e1>quality of the installation</e1> of windows, roof windows, rooflights and doors exceeds <e2>1,200 MJ/m2</e2> of the total floor area of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",greater,synthetic
+76acc6bd-50c0-4f3f-b015-42e171ec6ce7_11,,,<e1>16/01/2023 00:00</e1> <e2>cases</e2> must be installed.,equal,synthetic
+8101fa0e-645c-4a83-a6ab-66c45e94bf67,"If the dwelling already has mechanical ventilation, the centralised system could be extended into the additional room.",{'ID': '155_UK_DocF_V1_Ventilation'},"If the <e1>dwelling</e1> already has mechanical ventilation, the <e2>centralised system</e2> could be extended into the additional room.",none,annotated
+19478a13-7457-4dd3-a394-744f826db7b0,"The handle to at least one window in the principal living area is 700-1000mm above floor level, unless fitted with a remote opening device that is within this height range.",{'ID': '127_UK_DocM_V1_AccessAndUseOfBuildings'},"The <e1>handle</e1> to at least <e2>one</e2> window in the principal living area is 700-1000mm above floor level, unless fitted with a remote opening device that is within this height range.",none,annotated
+4fc3b5b1-a838-4429-b385-d8e80e6633eb,"In the absence of relevant harmonised European Standards, products with a travel exceeding 3m must have a product certificate issued by a Notified Body.",{'ID': '117_UK_DocM_V2_AccessAndUseOfBuildings'},"In the <e1>absence</e1> of relevant harmonised European Standards, products with a travel exceeding 3m must have a <e2>product certificate</e2> issued by a Notified Body.",none,annotated
+bde1697a-20c9-4f15-a63c-5be323a058c1,Any connection of two or more air handling units to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,{'ID': '90_Finnish_Health-IndoorClimateAndVentilation'},Any connection of two or more air handling units to the same duct or chamber shall be designed so that the pressures of the rooms or the <e1>directions</e1> of air flow between the rooms and in the ductworks do <e2>not change when the air flows of the units are being controlled</e2>.,selection,annotated
+0cafda73-ee3a-4a99-a224-2d142de63618,"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",{'ID': '238_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the <e1>system</e1> including pipework and <e2>emitters</e2> should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",selection,annotated
+302c413e-fefd-47f1-914f-0dc787e4a761_8,,,"Where <e1>reverberation time</e1> on surfaces is greater than <e2>4</e2>, a difference in light reflectance value should be a minimum of 20 points.",greater,synthetic
+7d877df3-9aa7-4dff-a64d-5356a66c944d_2,,,"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a <e1>protection</e1> exceeding <e2>40 degrees Celsius</e2> and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",greater,synthetic
+45adb0b6-63ee-4f42-b6a3-8fc396221c67_1,,,The <e1>rated output</e1> of the insulation plus any required air gap should be at least to the <e2>luminous efficacy</e2> of the rafters.,greater-equal,synthetic
+75c60084-6878-472d-8694-e8739e0dd76c_10,,,The <e1>access</e1> of access routes in assembly areas with a maximum capacity of 60 persons must be at least <e2>3.3m</e2>.,greater-equal,synthetic
+2f0f22aa-06d3-478d-a777-5aca5c2fb5c1,"For sliding doors and gates, provide both of the following: (i) a stop or other effective means to prevent them coming off the end of the track; (ii) a retaining rail to prevent doors and gates falling if the suspension system fails or the rollers leave the track.",{'ID': '120_UK_DocK_ProtectionFromFalling'},"For sliding doors and gates, provide both of the following: (i) a stop or other effective <e1>means</e1> <e2>to prevent them coming off the end of the track</e2>; (ii) a retaining rail to prevent doors and gates falling if the suspension system fails or the rollers leave the track.",selection,annotated
+3e9fc57e-bc69-4f17-a056-dd7767afa9bb,"If the height of the building does not exceed 28 metres, access to the attic fire compartments from the outside shall be required.",{'ID': '241_Finnish_FireSafety'},"If the <e1>height</e1> of the building does not exceed <e2>28 metres</e2>, access to the attic fire compartments from the outside shall be required.",less-equal,annotated
+e874f337-2067-4e77-ad32-c3b857f40e7a_5,,,"If the <e1>extends</e1> exceeds <e2>1m3/s</e2>, the total minimum width of the exits shall be calculated by increasing the original 1,200 millimetres by 400 millimetres for each additional group of 60 people.",greater,synthetic
+12e1a42b-38ed-42c8-ac32-86091fcb85b1,The frequency of measurements should be sufficient to ensure that changes in the use of the room or space throughout the day are represented in the readings.,{'ID': '125_UK_DocF_V2_Ventilation'},The <e1>frequency</e1> of measurements should be <e2>sufficient to ensure that changes in the use of the room or space throughout the day are represented in the readings</e2>.,necessity,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_4,,,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the <e1>mechanical ventilation</e1> of these must be at least <e2>270 millimetres</e2>.",greater-equal,synthetic
+23cff3c3-1251-4c5f-9fd9-8f52d25eb494,Gasfired boilers and multi-stage oilfired boilers with an output of more than 500kW should have fully modulating burner controls.,{'ID': '252_UK_DocM_V2_AccessAndUseOfBuildings'},Gasfired boilers and <e1>multi-stage oilfired boilers</e1> with an output of more than 500kW should have <e2>fully modulating burner controls</e2>.,necessity,annotated
+825053cb-af5d-43a9-b59b-e2a5ae78ea73_4,,,The <e1>ventilation rate</e1> of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the number of dwellings in the residential building; b. the <e2>energy efficiency measures</e2> of associated parking spaces.,greater,synthetic
+86831830-e7f0-4b90-aa27-dc0542b7ba4d_2,,,"If a residential block of flats does not have a lift, the stairs between floor levels must have natural light and at least <e1>90</e1> <e2>number of storeys</e2>.",greater-equal,synthetic
+70cd7164-bc50-4b16-95b0-432188db4ea5,Buildings located near to significant local pollution sources should be designed to minimise the intake of external air pollutants.,{'ID': '80_UK_DocO_Overheating'},<e1>Buildings</e1> <e2>located near to significant local pollution sources</e2> should be designed to minimise the intake of external air pollutants.,selection,annotated
+493ec553-7761-4d1e-aa98-05d925ddf955_5,,,The <e1>maximum number of occupants</e1> of a horizontal hatch must be at least <e2>190 kN</e2>.,greater-equal,synthetic
+5fa7daca-cb50-4397-a736-617e52d30187,"If efficiencies at below 30% are required and unavailable, the boiler efficiency may be taken as equal to that at 30% load.",{'ID': '246_UK_DocM_V2_AccessAndUseOfBuildings'},"If <e1>efficiencies</e1> at below 30% are required and unavailable, the <e2>boiler efficiency</e2> may be taken as equal to that at 30% load.",equal,annotated
+29ad081e-90f4-4eb0-9cea-a4f49beea768,Fans used for general air distribution that are rated at more than 1100W should be fitted with variable speed drives.,{'ID': '298_UK_DocM_V2_AccessAndUseOfBuildings'},Fans used for <e1>general</e1> <e2>air distribution</e2> that are rated at more than 1100W should be fitted with variable speed drives.,selection,annotated
+56b0e4bf-81d7-4ab9-855b-780ef2f0b1d3,"Storage premises with a fire load exceeding 1,200 MJ/m2 are not permitted within the building.",{'ID': '73_Finnish_FireSafety'},"Storage premises with a <e1>fire load</e1> exceeding <e2>1,200 MJ/m2</e2> are not permitted within the building.",greater,annotated
+1603fe12-9df6-4ab9-acbe-44895cccb7ed,Any looped cords must be fitted with child safety devices.,{'ID': '87_UK_DocO_Overheating'},Any looped <e1>cords</e1> must be <e2>fitted with child safety devices</e2>.,necessity,annotated
+3c6b438e-d99a-4c4d-aa19-0ec4f3f27662,"When installing controlled fittings, the controlled fitting should be well fitted and reasonably draught-proof.",{'ID': '162_UK_DocM_V2_AccessAndUseOfBuildings'},"When installing controlled fittings, the <e1>controlled fitting</e1> should be well fitted and <e2>reasonably draught-proof</e2>.",necessity,annotated
+86350df0-a40e-412b-a301-004524d56736_7,,,"For wet heating systems in new dwellings with a <e1>specification</e1> of <e2>One</e2> or greater, a minimum of two independently controlled heating circuits should be provided.",greater-equal,synthetic
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_3,,,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under <e1>shape</e1> <e2>1100mm</e2>.",equal,synthetic
+d925c189-860a-4fcb-ae88-d1cf8cc14fb8_1,,,"The <e1>total cost</e1> of steps in covered or heated outdoor staircases must be no less than <e2>200 lux</e2>, and the riser may be no more than 160 millimetres.",greater-equal,synthetic
+d5e04f9c-3e74-4ade-8a8c-07b77efd3fd1,"For windows and roof windows, U-values should be calculated based on a vertical position.",{'ID': '110_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For windows and <e1>roof windows</e1>, <e2>U-values</e2> should be calculated based on a vertical position.",part-of,annotated
+da4d5959-6e64-4e04-a1f3-8b42b6addab0_8,,,The outdoor <e1>steps</e1> used in the calculations for buildings other than those in intended use categories 1 and 2 outside the occupancy period shall be at least <e2>six metres</e2>.,greater-equal,synthetic
+061c3b6a-49ed-4803-9436-e6349fae98e0,Entrance doors should be capable of being held closed when not in use.,{'ID': '65_UK_DocM_V2_AccessAndUseOfBuildings'},Entrance <e1>doors</e1> should be <e2>capable of being held closed when not in use</e2>.,necessity,annotated
+c1b2e39e-0bab-438c-8b35-c2b37e5cf93a,"Equipment should be designed, specified and installed with the aim of maximising its efficiency as installed.",{'ID': '233_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Equipment</e1> should be designed, specified and <e2>installed with the aim of maximising its efficiency as installed</e2>.",necessity,annotated
+a1f91cfd-21f8-49a4-8468-746f49f4848e,"For a building that contains more than one dwelling for example a block of flats or a terrace of houses an average target primary energy rate, target emission rate and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",{'ID': '50_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For a building that contains more than one dwelling for example a block of flats or a <e1>terrace of houses</e1> an average target primary energy rate, <e2>target emission rate</e2> and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",none,annotated
+fb5d3054-4911-4049-ba09-1c3e80f9c07c,"The tread of steps in uncovered or unheated outdoor staircases must be no less than 390 millimetres, and the riser may be no more than 130 millimetres.",{'ID': '29_Finnish_SafetyOfUse'},"The tread of steps in uncovered or unheated outdoor staircases must be no less than 390 millimetres, and the <e1>riser</e1> may be no more than <e2>130 millimetres</e2>.",less-equal,annotated
+2f8d4247-e53b-49ae-bd26-c4f1765eaee8_5,,,"Extract air of <e1>limits</e1> <e2>50mm</e2>, 3 and 4 shall not be used as recirculation air.",equal,synthetic
+bde1697a-20c9-4f15-a63c-5be323a058c1,Any connection of two or more air handling units to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,{'ID': '90_Finnish_Health-IndoorClimateAndVentilation'},Any connection of two or more <e1>air handling units</e1> to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow <e2>between the rooms and in the ductworks</e2> do not change when the air flows of the units are being controlled.,none,annotated
+8b9e1d32-efa8-409b-873b-22e2eae5b537,External walls and their various layers must form a whole that prevents water from harmfully penetrating into the structures.,{'ID': '95_Finnish_Health-Humidity'},External <e1>walls</e1> and their various layers must <e2>form a whole that prevents water from harmfully penetrating into the structures</e2>.,necessity,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_0,,,"If the air flows of <e1>capacity</e1> <e2>25</e2> and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+01008f69-874b-443e-bcb2-2f5630280049,"If stairs are used only as an emergency exit and if they lead to spaces in a dwelling or accommodation facility other than those that are necessary for living, the riser may be no more than 220 millimetres and the tread must be no less than 220 millimetres.",{'ID': '24_Finnish_SafetyOfUse'},"If stairs are used only as an emergency exit and if they lead to spaces in a dwelling or accommodation facility other than those that are necessary for living, the <e1>riser</e1> may be no more than 220 millimetres and the <e2>tread</e2> must be no less than 220 millimetres.",none,annotated
+bb3ac5b0-14d0-4d75-95d9-713adc6f2f58,"Any walls, doors and windows should be insulated and draught-proofed to at least the same extent as in the existing dwelling.",{'ID': '433_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Any walls, doors and windows should be <e1>insulated</e1> and draught-proofed to <e2>at least the same extent as in the existing dwelling</e2>.",selection,annotated
+45adb0b6-63ee-4f42-b6a3-8fc396221c67_9,,,The <e1>maximum number of occupants</e1> of the insulation plus any required air gap should be at least to the <e2>service</e2> of the rafters.,greater-equal,synthetic
+3c0a8ccb-d813-40fb-b69b-88250d3bc4ec_7,,,These fittings should not exceed a <e1>tie force</e1> of <e2>(16.66 8.33 V0.4)/(1000 24)</e2>.,less-equal,synthetic
+05fdde92-d8af-42ad-963b-9019c69a8ab3,"For a timber frame where the intermediate floor structure breaches the external wall insulation, further insulation of the same thickness as the insulation used in the external wall should be included within the depth of the intermediate floor structure.",{'ID': '163_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For a timber frame <e1>where the intermediate floor structure breaches the external wall insulation</e1>, further insulation of the same thickness as the insulation <e2>used in the external wall</e2> should be included within the depth of the intermediate floor structure.",none,annotated
+5fa7daca-cb50-4397-a736-617e52d30187_5,,,"If efficiencies at below 30% are required and unavailable, the <e1>density</e1> may be taken as equal to that at <e2>400mm</e2>.",equal,synthetic
+f41fb8da-16bd-4404-accb-e32727f3736a,"Windows, glass walls and glass doors into which there is a danger of collision must be marked in such a way that they can be easily noticed.",{'ID': '69_Finnish_SafetyOfUse'},"<e1>Windows</e1>, glass walls and glass doors into which there is a danger of collision must be <e2>marked in such a way that they can be easily noticed</e2>.",necessity,annotated
+beeec1b2-c382-40cc-aec2-6eda86f5782e,"Each residential unit, shared communal room and common space should be categorised separately.",{'ID': '25_UK_DocO_Overheating'},"Each residential unit, shared <e1>communal room</e1> and common space should be <e2>categorised separately</e2>.",necessity,annotated
+35cacecf-06dc-4b0f-aadb-db2ee05518c7_11,,,"The area of windows and roof windows (but excluding display windows) <e1>located in a place where it is easy to install, read and service and where it cannot freeze</e1> exceeds <e2>55</e2> of the facade area.",greater,synthetic
+53bb982d-5260-4a69-a6dd-71e4f074e676_9,,,The <e1>illuminance</e1> of standing rows must be at least <e2>50 millimetres</e2>.,greater-equal,synthetic
+4fc3b5b1-a838-4429-b385-d8e80e6633eb,"In the absence of relevant harmonised European Standards, products with a travel exceeding 3m must have a product certificate issued by a Notified Body.",{'ID': '117_UK_DocM_V2_AccessAndUseOfBuildings'},"In the <e1>absence</e1> of relevant harmonised <e2>European Standards</e2>, products with a travel exceeding 3m must have a product certificate issued by a Notified Body.",selection,annotated
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_11,,,Skirtings totalling up to 50mm total thickness and shallow projecting ducts or <e1>organic substances</e1> above <e2>25 decibels</e2> may be discounted when measuring clear width.,greater,synthetic
+56b3f993-37b5-4cb1-9540-432972f8056e,"In a mechanical ventilation system, the air handling units and chambers shall be able to withstand the loads caused by fan pressure while the shutoff dampers are closed.",{'ID': '99_Finnish_Health-IndoorClimateAndVentilation'},"In a mechanical ventilation system, the air handling units and <e1>chambers</e1> shall be able to <e2>withstand the loads caused by fan pressure while the shutoff dampers are closed</e2>.",necessity,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_1,,,"If the air flows of <e1>sizes</e1> <e2>230mm</e2> and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+9618a274-45da-4e3e-87f0-21c2bfae4a8e_8,,,"A guardrail must be used at points with a <e1>going</e1> of over <e2>300 litres</e2>, if these can be accessed by children.",greater,synthetic
+3153d771-404e-4a54-ac05-ed1b75e37506_7,,,"Gangways should not be less than <e1>1400mm</e1> <e2>annual percentage of heat</e2> unless used by not more than 50 persons, in which case gangways should be a minimum of 900mm.",greater-equal,synthetic
+0df5892a-e396-424e-90f1-74f6ccfb9e1a,"A certain proportion of the changing rooms, washing facilities, saunas and swimming pools in a non-residential building shall be suitable for a person with mobility and functional impairment.",{'ID': '61_Finnish_Accessibility'},"A certain proportion of the <e1>changing rooms</e1>, washing facilities, saunas and swimming pools in a <e2>non-residential building</e2> shall be suitable for a person with mobility and functional impairment.",part-of,annotated
+e4fb8d18-8dbc-4351-a2df-d87f880f476a_3,,,The <e1>value</e1> for balconies is <e2>half a metre</e2> that of the load-bearing structures of the storey.,equal,synthetic
+13a437c0-918c-47f2-85bd-b80dd69eb027,"There are no limits on the design of display windows and similar glazing, but for new buildings their impact must be taken into account in the calculation of primary energy and CO2 emissions.",{'ID': '138_UK_DocM_V2_AccessAndUseOfBuildings'},"There are no limits on the <e1>design</e1> of <e2>display windows</e2> and similar glazing, but for new buildings their impact must be taken into account in the calculation of primary energy and CO2 emissions.",part-of,annotated
+f36650d9-cd31-4795-9728-7a4dcf3cadde,"Dwellings, accommodation premises, institutions, day-care institutions, day-care centres and other early childhood education premises and schools must be provided with an appropriate system that gives a warning at an early stage of a beginning fire.",{'ID': '229_Finnish_FireSafety'},"Dwellings, accommodation premises, <e1>institutions</e1>, <e2>day-care institutions</e2>, day-care centres and other early childhood education premises and schools must be provided with an appropriate system that gives a warning at an early stage of a beginning fire.",none,annotated
+6a553c19-481f-4947-9047-fd2c4d0daa44,"Any floors, walls and doors that have been installed to allow the potential liftway to be used as storage or for other purposes could be easily removed without structural alteration.",{'ID': '83_UK_DocM_V1_AccessAndUseOfBuildings'},"Any floors, <e1>walls</e1> and doors that have been installed to allow the potential liftway to be used as storage or for other purposes could be <e2>easily removed without structural alteration</e2>.",necessity,annotated
+9952f64d-e0df-4b03-84af-150782f81387_7,,,"For mobility-impaired people, a <e1>washing facilities</e1> of at least <e2>2m</e2> is preferred.",greater-equal,synthetic
+e3b85ad6-6132-40d7-86f8-3cc5d44eb12c,One bedroom should be close to an accessible bathroom suitable for a wheelchair user.,{'ID': '100_UK_DocM_V1_AccessAndUseOfBuildings'},One <e1>bedroom</e1> should be <e2>close to an accessible bathroom suitable for a wheelchair user</e2>.,necessity,annotated
+2f815a08-db3c-48a6-b248-d69aeac870ee_6,,,"the vertical <e1>calculations</e1> is: a. not more than <e2>2</e2>, where there is no liftway enclosure and no floor penetration; b. more than 2m, where there is a liftway enclosure.",less-equal,synthetic
+2f8d4247-e53b-49ae-bd26-c4f1765eaee8_3,,,"Extract air of <e1>flushing</e1> 2, 3 and <e2>25mm</e2> shall not be used as recirculation air.",equal,synthetic
+81314489-dcd9-410f-9b15-595b87e7c8f9_7,,,"The resilient layer should be timber sheathing at least <e1>7 mg/m3 (6 ppm)</e1> <e2>level differences</e2>, expanded metal or a similar resilient material.",greater-equal,synthetic
+72e7ed0c-9e73-46b2-a919-20f3fea337fd,"An area with a potentially flammable or explosive atmosphere must not be located in a building where there are dwellings, accommodation premises, institutions or assembly and business premises.",{'ID': '56_Finnish_FireSafety'},"An area with a potentially flammable or <e1>explosive</e1> <e2>atmosphere</e2> must not be located in a building where there are dwellings, accommodation premises, institutions or assembly and business premises.",selection,annotated
+99a53f17-48cb-4012-a47b-700761e0983b_2,,,Where a new building which is not a residential building or a mixed-use building has more than <e1>0.07</e1> <e2>tier</e2> (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,greater,synthetic
+5e51b653-449e-4d00-be19-0e20ecff5c49_6,,,The default <e1>presence</e1> should be <e2>9mm</e2>.,equal,synthetic
+6d190990-05e3-4496-8945-320d5937c7b8,Controls should be provided for ventilators so that the ventilation in each room can be adjusted.,{'ID': '58_UK_DocF_V2_Ventilation'},<e1>Controls</e1> should be provided for ventilators so that the <e2>ventilation in each room can be adjusted</e2>.,selection,annotated
+5869233a-4fc0-48bf-9007-2b0c9a169fef,"A building shall, if its size, number of storeys or an intended purpose of a premises within the building so requires, be divided into fire compartments in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",{'ID': '100_Finnish_FireSafety'},"A <e1>building</e1> shall, if its size, number of storeys or an intended purpose of a premises within the building so requires, be <e2>divided into fire compartments</e2> in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",necessity,annotated
+500fc416-e652-4a2c-8dd3-8d9754ea1829,There should be no visible mould on the inner surfaces of external walls of a properly heated building with typical moisture generation.,{'ID': '115_UK_DocF_V2_Ventilation'},There should be no visible mould on the inner surfaces of <e1>external</e1> <e2>walls</e2> of a properly heated building with typical moisture generation.,selection,annotated
+2ca092ec-4425-4552-a389-fd0dadfbd154_7,,,NOTE: A floor level with a <e1>sections</e1> of <e2>1400mm</e2> or steeper should be designed as a ramp.,greater-equal,synthetic
+5e51b653-449e-4d00-be19-0e20ecff5c49_0,,,The default <e1>storage capacity</e1> should be <e2>0.15m/s</e2>.,equal,synthetic
+94c0e823-a61d-49d6-82b3-4ca96f65dfa4,The buildings surfaces and lighting must be such that they achieve the contrasts in brightness needed for observation.,{'ID': '64_Finnish_SafetyOfUse'},The buildings surfaces and <e1>lighting</e1> must be such that they <e2>achieve the contrasts in brightness needed for observation</e2>.,necessity,annotated
+c384013b-c40f-4925-acbe-465e1ca5bc13_1,,,<e1>ten millimetres</e1> <e2>public service facility</e2> per detail should be recorded.,equal,synthetic
+57f7bbad-51b7-4627-8fe9-2d7a50289448,"Doors to the principal, or alternative accessible, entrance should be accessible to all, particularly wheelchair users and people with limited physical dexterity.",{'ID': '64_UK_DocM_V2_AccessAndUseOfBuildings'},"Doors to the principal, or <e1>alternative accessible</e1>, <e2>entrance</e2> should be accessible to all, particularly wheelchair users and people with limited physical dexterity.",selection,annotated
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3_8,,,"Where the cost of installing only cable routes is more than 7% of the total cost of the major <e1>escape routes</e1>, there is no <e2>Voids</e2> to install either electric vehicle charge points or cable routes.",not-part-of,synthetic
+2c725d50-13d5-4e77-bacf-9f174530e27c,The energy efficiency of historic and traditional buildings should be improved only if doing so will not cause long-term deterioration of the buildings fabric or fittings.,{'ID': '17_UK_DocM_V2_AccessAndUseOfBuildings'},The <e1>energy efficiency</e1> of historic and traditional buildings should be <e2>improved only if doing so will not cause long-term deterioration of the buildings fabric or fittings</e2>.,necessity,annotated
+5577528f-8fa0-4ca3-96f6-ea418091cb86_8,,,The side edges of stairs and landings must be fitted with a raised camber to prevent slipping over the edge if a cube measuring more than <e1>190 kN</e1> in <e2>Air permeability</e2> is able to pass through the opening between the plane level and the handrail or wall.,greater,synthetic
+5b4380ba-0066-4735-a362-316d4c8e70b2_10,,,"Where a building undergoing major renovation, which is not a residential building or a mixeduse building, will have more than <e1>1.501kWhPE/kWh</e1> <e2>renovation</e2> after the major renovation is completed (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.",greater,synthetic
+45338082-ca66-418b-8fe1-8f2be926f330_7,,,A <e1>Door entry controls</e1> of no more than <e2>two years</e2> may pass between the stair steps.,less-equal,synthetic
+7f3f59a4-fc7e-4b14-8074-384f6cacf548_2,,,"The <e1>design temperature difference</e1> of a barrier in a dwellings indoor areas may, however, be at least <e2>one metre</e2> if the drop is less than three metres.",greater-equal,synthetic
+984c252b-74f4-4d85-9080-1c8ae1851eca,"If performance requires thicker glass to be used, an equivalent window unit with standard thickness (6mm) glazing should be shown to meet the required standard.",{'ID': '113_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If performance requires thicker glass to be used, an equivalent window unit with <e1>standard thickness</e1> (<e2>6mm</e2>) glazing should be shown to meet the required standard.",equal,annotated
+81f14fc1-af5d-45e8-8725-94d2510e4701,"A dwelling that is intended for service housing or supported housing of a person with mobility and functional impairment shall, irrespective of the number of storeys in the building, have a turning  space  with  a  diameter  of  at  least  1,500  millimetres  in  the  hallway  and  kitchen.",{'ID': '29_Finnish_Accessibility'},"A dwelling that is intended for service housing or supported housing of a person with mobility and functional impairment shall, irrespective of the number of storeys in the building, have a <e1>turning space</e1> with a <e2>diameter</e2> of at least 1,500 millimetres in the hallway and kitchen.",part-of,annotated
+e26e2280-635f-44b5-967c-6cf0b56e15de,Water pipes that are located in cold premises shall be thermally insulated.,{'ID': '86_Finnish_Health-WaterAndSewerage'},<e1>Water pipes</e1> that are located in cold premises shall be <e2>thermally insulated</e2>.,necessity,annotated
+8cef7dc5-2d76-4dd8-80c5-6861b11a8f6f_6,,,"Where the work concerns a building containing more than <e1>0.5 kN/m2</e1> <e2>heating system</e2>, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",greater-equal,synthetic
+d3fc8c9b-c23a-4188-8723-369caa90453c_8,,,"The <e1>presence</e1> for a building's total combined window area is <e2>0.15</e2> of the sum total of the floor plate areas of the buildings storeys that are fully or in part above the ground but, however, at most 50 of the building's facade area.",equal,synthetic
+0d5f23b0-8423-4528-95bd-179fe81c75df,A building and its environment must be lit in a way that enables safe use and servicing.,{'ID': '62_Finnish_SafetyOfUse'},A building and its <e1>environment</e1> must be <e2>lit</e2> in a way that enables safe use and servicing.,necessity,annotated
+dcc583b1-8c4c-42cf-a1ed-e8907de56254,"The rise of the indoor steps of other spaces intended for everyday use may be no more than 180 millimetres, and the tread must be no less than 270 millimetres.",{'ID': '23_Finnish_SafetyOfUse'},"The rise of the indoor <e1>steps</e1> of other spaces intended for everyday use may be no more than <e2>180 millimetres</e2>, and the tread must be no less than 270 millimetres.",none,annotated
+d925c189-860a-4fcb-ae88-d1cf8cc14fb8_0,,,"The <e1>CO2</e1> of steps in covered or heated outdoor staircases must be no less than <e2>0.1m2</e2>, and the riser may be no more than 160 millimetres.",greater-equal,synthetic
+40b40b1b-d1b1-49d8-b9b7-13c5845a169d_9,,,The structure of the control appliance of the plumbing fixture shall be such that its <e1>Unit length</e1> does not arise above <e2>2.4 metres</e2>.,less-equal,synthetic
+f420ae57-5656-4558-b1a3-1079e46bf6cc_0,,,"In the case of the storey-level door of a dwelling, or if the <e1>lengths</e1> through the door exceeds <e2>30</e2>, doors must open in the direction of the exit.",greater,synthetic
+4d80c4d1-08ee-481a-9f9c-e9151ce1094d_9,,,"The <e1>from the top and bottom corners of the door</e1> of windows, roof windows, rooflights and doors should not exceed <e2>10 litres per second per person</e2> of the total floor area of the dwelling.",less-equal,synthetic
+f009a781-0ced-408d-b3d1-6ae7a848012e,"The landings in the indoor and outdoor areas of a building must be safe, sufficiently spacious and suitable for their purpose.",{'ID': '31_Finnish_SafetyOfUse'},"The landings in the <e1>indoor</e1> and outdoor <e2>areas</e2> of a building must be safe, sufficiently spacious and suitable for their purpose.",selection,annotated
+73efbdcb-2751-4f01-9471-ccca44ccc0f3,"If a drainage point is located below the height of backwater, the waste water must be pumped.",{'ID': '133_Finnish_Health-WaterAndSewerage'},"If a drainage point is located below the height of backwater, the <e1>waste water</e1> must be <e2>pumped</e2>.",necessity,annotated
+6414854d-01f9-481f-a7f4-c4581e48d8b1_8,,,Special safety features are not necessary if the <e1>changing rooms</e1> is not more than <e2>2.2 metres</e2> long.,less-equal,synthetic
+7d7d55f1-b28d-4ce8-aec6-dd4dc0786ce8_5,,,"For sizes of cylinder not listed, the <e1>air gap</e1> from the cylinder should not exceed <e2>one metre</e2>, where V is the volume in litres.",less-equal,synthetic
+113b8bf8-1856-45f5-a54b-d65ef100b437_3,,,"If a gas-fired combination boiler is installed in an existing dwelling, at least <e1>40 degrees Celsius</e1> of the following <e2>spread of fire</e2>, appropriate to the system, should be installed.",greater-equal,synthetic
+d3fc8c9b-c23a-4188-8723-369caa90453c_9,,,"The <e1>air leakage rate figure</e1> for a building's total combined window area is <e2>400mm</e2> of the sum total of the floor plate areas of the buildings storeys that are fully or in part above the ground but, however, at most 50 of the building's facade area.",equal,synthetic
+a94b6b4f-a05e-403e-bbca-ebe1b94e38a1,"The area of sloping surfaces such as staircases, galleries, raked auditoria and tiered terraces should be taken as their area on plan.",{'ID': '470_UK_DocM_V2_AccessAndUseOfBuildings'},"The <e1>area</e1> of sloping surfaces such as staircases, <e2>galleries</e2>, raked auditoria and tiered terraces should be taken as their area on plan.",none,annotated
+457ecdc0-8247-4ad4-9beb-3b7a31cfa0fd,"All public areas, including lavatory accommodation, public telephones and external terraces should be accessible.",{'ID': '138_UK_DocM_V2_AccessAndUseOfBuildings'},"All public areas, including lavatory accommodation, public telephones and <e1>external</e1> <e2>terraces</e2> should be accessible.",selection,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",{'ID': '84_Finnish_Health-IndoorClimateAndVentilation'},"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined <e1>air flow</e1> is classified under <e2>category</e2> 2.",part-of,annotated
+d925c189-860a-4fcb-ae88-d1cf8cc14fb8,"The tread of steps in covered or heated outdoor staircases must be no less than 300 millimetres, and the riser may be no more than 160 millimetres.",{'ID': '28_Finnish_SafetyOfUse'},"The <e1>tread</e1> of <e2>steps</e2> in covered or heated outdoor staircases must be no less than 300 millimetres, and the riser may be no more than 160 millimetres.",part-of,annotated
+0f67dad7-6df9-444b-8e72-f447668e3fde,"Where sanitary facilities are wheelchair accessible, WC pans should be a minimum of 400mm high.",{'ID': '104_UK_DocM_V1_AccessAndUseOfBuildings'},"Where <e1>sanitary facilities</e1> are wheelchair accessible, <e2>WC pans</e2> should be a minimum of 400mm high.",part-of,annotated
+26980508-105c-49db-8595-bf001a48d757_5,,,"In <e1>building fabric</e1> with no fixed <e2>grippable handrail</e2> or furnishings, the number of persons shall be calculated to be two persons per square metre.",not-part-of,synthetic
+4a82f789-a98a-4379-9b81-2a20cfba6c87_11,,,"If the internal ties must be centred on the supporting line, the minimum value of the <e1>inaccuracies</e1>, <e2>2.5 ties/m2</e2>, will also be applied to internal ties.",greater-equal,synthetic
+3153d771-404e-4a54-ac05-ed1b75e37506_1,,,"Gangways should not be less than 1100mm <e1>value</e1> unless used by not more than 50 persons, in which case gangways should be a minimum of <e2>3</e2>.",greater-equal,synthetic
+eeb4239f-3819-475c-ad20-756bed80c4ff,"In reference heat loss calculations, the value used as the annual efficiency of heat recovery from ventilation extract air of the buildings ventilation system shall be 55.",{'ID': '151_Finnish_EnergyEfficiency'},"In reference heat loss calculations, the value used as the <e1>annual efficiency of heat recovery from ventilation extract air</e1> of the buildings <e2>ventilation system</e2> shall be 55.",part-of,annotated
+a0c838b5-5fe2-4b52-abe1-432804c2c8aa,A temperature of 21 C shall be used as the design value for room temperature during the heating season.,{'ID': '33_Finnish_Health-IndoorClimateAndVentilation'},A temperature of 21 C shall be used as the design value for <e1>room temperature</e1> <e2>during the heating season</e2>.,selection,annotated
+835d8fad-7a27-4299-aa38-a5b1771a6779,"In large building complexes, such as retail parks and large sports centres, there should be one wheelchair-accessible unisex toilet capable of including an adult changing table.",{'ID': '178_UK_DocM_V2_AccessAndUseOfBuildings'},"In large building complexes, such as retail parks and large sports centres, there should be <e1>one</e1> wheelchair-accessible <e2>unisex</e2> toilet capable of including an adult changing table.",none,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479,Individual flights are: for gradients up to 1:15 not more than 10m long; for gradients up to 1:12 not more than 5m long.,{'ID': '18_UK_DocM_V1_AccessAndUseOfBuildings'},<e1>Individual</e1> <e2>flights</e2> are: for gradients up to 1:15 not more than 10m long; for gradients up to 1:12 not more than 5m long.,selection,annotated
+2afa8bba-b5ad-4e12-bc27-4beea3fd09b2_3,,,The normal relationship between the dimensions of the rise and going is: <e1>3.3m</e1> equals <e2>3m</e2>.,equal,synthetic
+5b4380ba-0066-4735-a362-316d4c8e70b2_11,,,"Where a building undergoing major renovation, which is not a residential building or a mixeduse building, will have more than <e1>1000m2</e1> <e2>heat distribution room</e2> after the major renovation is completed (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.",greater,synthetic
+db734798-9e42-4fe1-900c-77d4e6131809,"The main doors for entering a dwelling (usually the front door) should have a door viewer unless other means exist to see callers, such as clear glass within the door or a window next to the doorset.",{'ID': '11_UK_DocQ_Security_Dwellings'},"The main doors for entering a dwelling (usually the front door) should have a door viewer unless other <e1>means</e1> exist to see callers, such as clear <e2>glass</e2> within the door or a window next to the doorset.",selection,annotated
+7e34700e-92de-4b00-a820-f4085a2e186c_5,,,"If the free gap between facing walls of adjacent glazed balconies or the <e1>breaking</e1> of the wall to the window of an adjacent fire compartment is less than <e2>23C</e2>, the wall in question must be class EI 15.",less,synthetic
+703e5c71-bd54-4267-acf4-fa7db1e70d49,"Any sound system in an auditorium, a restaurant, a conference facility, a facility for festive occasions, a teaching facility or other similar assembly facility or a public service facility shall have an induction loop or a similar sound transmission system.",{'ID': '67_Finnish_Accessibility'},"Any <e1>sound system</e1> in an auditorium, a restaurant, a conference facility, a facility for festive occasions, a teaching facility or other <e2>similar assembly facility</e2> or a public service facility shall have an induction loop or a similar sound transmission system.",part-of,annotated
+50e89a86-e2be-439d-b230-79274cd7199b_8,,,Modular and portable buildings with a planned <e1>domestic hot water circulation heat loss</e1> of more than <e2>3.3m</e2> at a single location should be shown to comply with the energy efficiency requirements.,greater,synthetic
+51550284-0701-41b2-9a76-a0061d16938a,"Windows and doors: to ensure continuity of the air barrier, window and door units should connect to the primary air barrier and window and door frames should be taped to surrounding structural openings, using air sealing tape.",{'ID': '188_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Windows and doors: to ensure <e1>continuity</e1> of the <e2>air barrier</e2>, window and door units should connect to the primary air barrier and window and door frames should be taped to surrounding structural openings, using air sealing tape.",part-of,annotated
+8364a5f1-f80e-484c-9f38-bffc6f4c1876_8,,,"Where communal parking is provided to blocks of flats, at least <e1>190  millimetres</e1> standard <e2>load-bearing element</e2> is provided close to the communal entrance of each core of the block (or to the lift core where the parking bay is internal).",greater-equal,synthetic
+5fa7daca-cb50-4397-a736-617e52d30187_4,,,"If efficiencies at below 30% are required and unavailable, the <e1>facade area</e1> may be taken as equal to that at <e2>25mm</e2>.",equal,synthetic
+0aaf71f0-a482-4a72-a407-0d6db79c7f6f_1,,,"In a building consisting primarily of one storey, no more than 200 m2 of fire-compartmented and no more than <e1>20 points</e1> of non-fire-compartmented <e2>fixings</e2> that essentially relate to the business of the building may be located on the level of second storey.",less-equal,synthetic
+5e7d4831-4ec8-48f9-9e60-0422fcc1eae4_11,,,"When replacing an existing system, the <e1>limits</e1> of the new system should be no less than <e2>number of storeys</e2> of the existing system, except where a smaller system can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",greater-equal,synthetic
+9f8c2fbb-a04e-42f9-8fa0-b7a905dbafa0,"The ventilation openings or slots leading to the ventilation space or gap of a structure equipped with a ventilation space or gap must be positioned so that the ventilation space or gap is fully usable as a ventilation air flow path and that the ventilation space or gap is free of enclosed, non-ventilated areas.",{'ID': '40_Finnish_Health-Humidity'},"The <e1>ventilation</e1> <e2>openings</e2> or slots leading to the ventilation space or gap of a structure equipped with a ventilation space or gap must be positioned so that the ventilation space or gap is fully usable as a ventilation air flow path and that the ventilation space or gap is free of enclosed, non-ventilated areas.",part-of,annotated
+4470dde4-6422-4c13-9781-de68c3e075dc_8,,,"The outdoor <e1>heat gain</e1> of a dwelling unit, however, shall be designed to be a minimum of <e2>adequate number</e2>.",greater-equal,synthetic
+536b172d-ccd1-479a-8136-6ee05db0f264_5,,,"Where pipework is above ground, the performance of the pipe <e1>parts</e1> should be at least as high as the <e2>target fabric energy efficiency rate</e2> of pipework in the buried part of the system.",greater-equal,synthetic
+f51da5c6-7614-4719-8150-e22851e4aa12,"The building fabric should be constructed so that thermal bridging, including at the party wall, is reasonably limited.",{'ID': '152_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The building fabric should be constructed so that <e1>thermal bridging</e1>, including at the party wall, is <e2>reasonably limited</e2>.",selection,annotated
+2633c957-07b4-4caa-a9d6-5acbac16b0b0,NOTE: Linear interpolation should be used to determine efficiencies between manufacturers declared efficiencies at 30 and 100 load.,{'ID': '245_UK_DocM_V2_AccessAndUseOfBuildings'},NOTE: <e1>Linear interpolation</e1> should be used to determine <e2>efficiencies</e2> between manufacturers declared efficiencies at 30 and 100 load.,necessity,annotated
+636bce88-fd3b-4e5a-9f6a-4aa0d3d1bfa4,"Where a new building contains more than one dwelling, a common access point for a gigabit-capable public electronic communications network is required as a part of the buildings gigabit-ready physical infrastructure.",{'ID': '6_UK_DocR_V1_InfrastructureForElectircalCommunications'},"Where a <e1>new</e1> <e2>building</e2> contains more than one dwelling, a common access point for a gigabit-capable public electronic communications network is required as a part of the buildings gigabit-ready physical infrastructure.",selection,annotated
+6075de3c-d339-4ba4-9945-990480975615,"Where a kitchen and living room accommodation are not separate rooms (i.e. open plan), no fewer than three ventilators of the same equivalent area as for other habitable rooms should be provided within the open-plan space.",{'ID': '94_UK_DocF_V1_Ventilation'},"Where a kitchen and <e1>living room accommodation</e1> are not separate rooms (i.e. open plan), no fewer than <e2>three</e2> ventilators of the same equivalent area as for other habitable rooms should be provided within the open-plan space.",none,annotated
+fb5d3054-4911-4049-ba09-1c3e80f9c07c,"The tread of steps in uncovered or unheated outdoor staircases must be no less than 390 millimetres, and the riser may be no more than 130 millimetres.",{'ID': '29_Finnish_SafetyOfUse'},"The tread of <e1>steps</e1> in uncovered or unheated outdoor staircases must be no less than 390 millimetres, and the <e2>riser</e2> may be no more than 130 millimetres.",part-of,annotated
+45adb0b6-63ee-4f42-b6a3-8fc396221c67,The depth of the insulation plus any required air gap should be at least to the depth of the rafters.,{'ID': '128_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>depth</e1> of the insulation plus any required <e2>air gap</e2> should be at least to the depth of the rafters.,part-of,annotated
+dcc583b1-8c4c-42cf-a1ed-e8907de56254_0,,,"The <e1>steps</e1> of the indoor steps of other spaces intended for everyday use may be no more than <e2>150mm</e2>, and the tread must be no less than 270 millimetres.",less-equal,synthetic
+835d8fad-7a27-4299-aa38-a5b1771a6779_0,,,"In large building complexes, such as retail parks and large sports centres, there should be <e1>EI 15</e1> wheelchair-accessible unisex <e2>thermal bridging</e2> capable of including an adult changing table.",equal,synthetic
+88e23b46-22d9-4be6-87b7-40541f7995a9,"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the distance of the uppermost floor level from the entry level exceeds 24 metres; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",{'ID': '254_Finnish_FireSafety'},"A building shall be provided with a permanently installed <e1>dry riser</e1> that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the distance of the uppermost floor level from the entry level exceeds 24 metres; 2) in the <e2>premises</e2> below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",necessity,annotated
+2633c957-07b4-4caa-a9d6-5acbac16b0b0_1,,,NOTE: Linear interpolation should be used to determine efficiencies between manufacturers declared efficiencies at 30 and <e1>200 Watts per room</e1> <e2>step</e2>.,equal,synthetic
+984c252b-74f4-4d85-9080-1c8ae1851eca_5,,,"If performance requires thicker glass to be used, an equivalent window unit with <e1>dwelling emission rate</e1> (<e2>650mm</e2>) glazing should be shown to meet the required standard.",equal,synthetic
+d82c4149-8daa-48b2-8f46-c959a5f9ebe3,"Artificial lighting should be designed to give good colour rendering of all surfaces, without creating glare or pools of bright light and strong shadows.",{'ID': '152_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Artificial</e1> <e2>lighting</e2> should be designed to give good colour rendering of all surfaces, without creating glare or pools of bright light and strong shadows.",selection,annotated
+fc129e2c-abfa-48be-9fd6-e85f077ae67b,"A space alongside the leading edge of a door should be provided to enable a wheelchair user to reach and grip the door handle, then open the door without releasing hold on the handle and without the footrest colliding with the return wall.",{'ID': '70_UK_DocM_V2_AccessAndUseOfBuildings'},"A <e1>space</e1> alongside the leading edge of a door should be provided to <e2>enable a wheelchair user to reach and grip the door handle, then open the door without releasing hold on the handle and without the footrest colliding with the return wall</e2>.",necessity,annotated
+a2f3a871-91d5-4777-95c9-4744792b3a69,"in an existing building, for the principal or main staff entrance or entrances to be accessible, an alternative accessible entrance should be provided.",{'ID': '61_UK_DocM_V2_AccessAndUseOfBuildings'},"in an existing <e1>building</e1>, for the principal or main staff entrance or entrances to be <e2>accessible</e2>, an alternative accessible entrance should be provided.",none,annotated
+12e545d1-64f4-45c9-a520-5b8a003eba0a_11,,,"If the dwelling has more than <e1>0.15m/s</e1> exposed <e2>panel</e2>, the area of background ventilators on each facade should be similar, to allow cross-ventilation.",greater,synthetic
+bb9ec292-062b-43c3-8590-856dd5f6b890_6,,,"The building primary energy rate and <e1>cross-sectional area</e1> calculated using the measured air permeability must not be higher than the target primary energy rate and <e2>gradient</e2>, respectively.",less-equal,synthetic
+63af9f99-6939-4e8c-a6a9-8b10942e1597_5,,,"The handle to at least <e1>190  millimetres</e1> <e2>accompanied wheelchair users</e2> in the principal living area is located between 450mm and 1200mm above floor level, unless the window is fitted with a remote opening device that is within this height range.",greater-equal,synthetic
+c47598f9-df79-4d77-aba9-8f380342372f_3,,,extract air of <e1>net heating energy demand</e1> <e2>three</e2> shall be conducted to the outdoors through individual extract air ducts.,equal,synthetic
+45adb0b6-63ee-4f42-b6a3-8fc396221c67,The depth of the insulation plus any required air gap should be at least to the depth of the rafters.,{'ID': '128_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>depth</e1> of the <e2>insulation</e2> plus any required air gap should be at least to the depth of the rafters.,part-of,annotated
+70292367-f940-4ca6-b35f-b47bd4e66cd3,Cable routes must still be provided for a minimum of one in five parking spaces.,{'ID': '71_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},Cable routes must still be provided for a minimum of <e1>one</e1> in <e2>five</e2> parking spaces.,none,annotated
+6e49e97f-54f6-4333-9b1e-84373a7defe8,The protective part of the barrier must extend to a height of at least 0.7 metres from the surface of the landing or step.,{'ID': '40_Finnish_SafetyOfUse'},The <e1>protective part</e1> of the barrier must <e2>extend to a height of at least 0.7 metres from the surface of the landing or step</e2>.,necessity,annotated
+6414854d-01f9-481f-a7f4-c4581e48d8b1_6,,,Special safety features are not necessary if the <e1>water pipe</e1> is not more than <e2>01:08:00</e2> long.,less-equal,synthetic
+6414854d-01f9-481f-a7f4-c4581e48d8b1_0,,,Special safety features are not necessary if the <e1>built on site</e1> is not more than <e2>1m2</e2> long.,less-equal,synthetic
+eeb4239f-3819-475c-ad20-756bed80c4ff,"In reference heat loss calculations, the value used as the annual efficiency of heat recovery from ventilation extract air of the buildings ventilation system shall be 55.",{'ID': '151_Finnish_EnergyEfficiency'},"In reference heat loss calculations, the value used as the <e1>annual efficiency of heat recovery from ventilation extract air</e1> of the buildings ventilation system shall be <e2>55</e2>.",equal,annotated
+8e5e9560-4b22-4fe0-ad86-e52b82ffe4d2,"When  calculating  the  energy  consumption  of  a  buildings  cooling  system,  the  energy consumption of cooling energy production and the electrical energy consumption of auxiliary units  shall  be  taken  into  account  where  the  use  of  the  systems  is  required  for  indoor temperature control.",{'ID': '111_Finnish_EnergyEfficiency'},"When calculating the energy consumption of a buildings cooling system, the energy consumption of cooling energy production and the electrical <e1>energy consumption</e1> of <e2>auxiliary units</e2> shall be taken into account where the use of the systems is required for indoor temperature control.",part-of,annotated
+4fc3b5b1-a838-4429-b385-d8e80e6633eb_8,,,"In the absence of relevant harmonised European Standards, products with a <e1>value</e1> exceeding <e2>150mm</e2> must have a product certificate issued by a Notified Body.",greater,synthetic
+26980508-105c-49db-8595-bf001a48d757_4,,,"In <e1>gained via an interconnecting doorset from the garage</e1> with no fixed <e2>ventilation equipment</e2> or furnishings, the number of persons shall be calculated to be two persons per square metre.",not-part-of,synthetic
+9dd2a0f1-0ff9-4416-8abd-1e6589980ff4_10,,,"If the <e1>dwelling fabric energy efficiency rate</e1> of a mechanical ventilation systems air duct is designed to be greater than <e2>25 decibels</e2>, the outdoor air and exhaust air ducts shall be fitted with shutoff dampers that close automatically when the system shuts down.",greater,synthetic
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_5,,,Skirtings totalling up to <e1>six metres</e1> <e2>average carbon monoxide concentration</e2> and shallow projecting ducts or casings above 1800mm may be discounted when measuring clear width.,less-equal,synthetic
+ee0c8c7c-c65e-4403-92e6-628fd680f3bf_1,,,"Any panel within the doorset should be at least <e1>1,200 MJ/m2</e1> <e2>sales counter</e2>.",greater-equal,synthetic
+f6e7c818-f661-400b-8272-8062c5a7de68,"Where a lift is provided, it should be suitable for a wheelchair user.",{'ID': '22_UK_DocM_V1_AccessAndUseOfBuildings'},"Where a <e1>lift</e1> is provided, it should be <e2>suitable for a wheelchair use</e2>r.",necessity,annotated
+3931f0fa-433e-4fb8-96bf-a747f3622ee0,"In order to help people with visual impairment to appreciate the size of a space they have entered, or to find their way around, there should be a visual contrast between the wall and the ceiling, and between the wall and the floor.",{'ID': '97_UK_DocM_V2_AccessAndUseOfBuildings'},"In order to help <e1>people</e1> with visual impairment to appreciate the size of a space they have entered, or <e2>to find their way around</e2>, there should be a visual contrast between the wall and the ceiling, and between the wall and the floor.",selection,annotated
+10e66a84-25db-40a0-87d5-6297d0732fe4,The shutoff valves shall be located: 1) at each house; 2) at each apartment; 3) in vertical service pipes; 4) on both sides of devices installed in the service pipes; 5) before a device or fixture that is connected to the connector pipe;  6) on both sides of the water meters.,{'ID': '93_Finnish_Health-WaterAndSewerage'},The shutoff valves shall be located: 1) at each house; 2) at each apartment; 3) in <e1>vertical</e1> <e2>service pipes</e2>; 4) on both sides of devices installed in the service pipes; 5) before a device or fixture that is connected to the connector pipe; 6) on both sides of the water meters.,selection,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479_5,,,Individual flights are: for gradients up to 1:15 not more than 10m long; for <e1>equivalent area</e1> up to <e2>70 kN</e2> not more than 5m long.,less-equal,synthetic
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_1,,,"The wall ties should have a <e1>constraints</e1> of <e2>190 kN</e2> and a vertical spacing of 450mm, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",equal,synthetic
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",{'ID': '83_Finnish_SafetyOfUse'},"The free opening of the vertical hatch or <e1>window</e1> of an emergency exit must be at least 600 millimetres in height and 500 millimetres in <e2>width</e2>; however, the sum of these must be at least 1,500 millimetres.",none,annotated
+fb1da22f-8ddb-4399-b441-64dca68da9af_5,,,"If a lift or other device for moving between levels is installed in the exit of an existing building, the dwellings exit may be no less than <e1>4</e1> <e2>maximum capacity</e2>.",greater-equal,synthetic
+d0927095-9e43-4ce4-a740-d5df69dc1dc3,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",{'ID': '84_Finnish_Health-IndoorClimateAndVentilation'},"If the air flows of extract air categories 1 and <e1>2</e1> are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category <e2>2</e2>.",none,annotated
+29232335-402c-4ed9-af74-fd093ac22e28,The natural or mechanical ventilation system of a building shall be strong and its air-tightness shall be at least class B.,{'ID': '95_Finnish_Health-IndoorClimateAndVentilation'},The natural or mechanical <e1>ventilation system</e1> of a <e2>building</e2> shall be strong and its air-tightness shall be at least class B.,part-of,annotated
+7e34700e-92de-4b00-a820-f4085a2e186c_7,,,"If the free gap between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than 2 metres, the wall in question must be <e1>rated speed</e1> <e2>two</e2>.",equal,synthetic
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",{'ID': '75_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is <e1>exempt from the requirement to install the electric vehicle charge point</e1>; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major <e2>renovation</e2>.",none,annotated
+75c60084-6878-472d-8694-e8739e0dd76c_6,,,The <e1>rated speed</e1> of access routes in assembly areas with a maximum capacity of 60 persons must be at least <e2>55 degrees Celsius</e2>.,greater-equal,synthetic
+46f5be2a-1514-420b-bc39-331fc6e0d2df_11,,,"The dwelling primary energy rate, dwelling emission rate and <e1>diameter</e1>, all calculated using the measured air permeability, must not be higher than the target primary energy rate, target emission rate and <e2>control capabilities</e2>, respectively.",less-equal,synthetic
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3,"Where the cost of installing only cable routes is more than 7% of the total cost of the major renovation, there is no requirement to install either electric vehicle charge points or cable routes.",{'ID': '53_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where the <e1>cost</e1> of <e2>installing only cable routes</e2> is more than 7% of the total cost of the major renovation, there is no requirement to install either electric vehicle charge points or cable routes.",part-of,annotated
+0aaf71f0-a482-4a72-a407-0d6db79c7f6f_9,,,"In a building consisting primarily of one storey, no more than 200 m2 of fire-compartmented and no more than <e1>1,500  millimetres</e1> of non-fire-compartmented <e2>Provision</e2> that essentially relate to the business of the building may be located on the level of second storey.",less-equal,synthetic
+a28272ea-f4a9-4e36-93b6-2fe9c692ba0d,"The building control body should be notified that the analysis of high-efficiency alternative systems has been undertaken, that it is documented and is available to be verified.",{'ID': '115_UK_DocM_V2_AccessAndUseOfBuildings'},"The <e1>building control body</e1> should be <e2>notified that the analysis of high-efficiency alternative systems has been undertaken, that it is documented and is available to be verified</e2>.",necessity,annotated
+99a53f17-48cb-4012-a47b-700761e0983b_5,,,Where a new building which is not a residential building or a mixed-use building has more than <e1>20</e1> <e2>water heater</e2> (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,greater,synthetic
+1913381b-a2cc-496e-9168-82ccf2a01d50_7,,,"In connection with repair and alteration work, the heat emitters connected to the domestic hot water ring duct may be replaced so that the <e1>supports</e1> of the heat emitters to be installed does not exceed <e2>180 millimetres</e2>.",less-equal,synthetic
+bde1697a-20c9-4f15-a63c-5be323a058c1,Any connection of two or more air handling units to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,{'ID': '90_Finnish_Health-IndoorClimateAndVentilation'},Any connection of two or more air handling units to the same duct or chamber shall be designed so that the <e1>pressures</e1> of the rooms or the directions of air flow between the rooms and in the ductworks do <e2>not change when the air flows of the units are being controlled</e2>.,selection,annotated
+cc72106e-9e7f-47cf-8a95-0173a8305dad_9,,,"In a new building, the crawl space <e1>long</e1> must be <e2>16/01/2023 00:00</e2> on average at the minimum.",greater-equal,synthetic
+e1f1aeb9-7453-4b6b-b3f1-6049d711868a,The fire performance of the external wall structure of a building no more than 56 metres in height may also be demonstrated by a fullscale test.,{'ID': '156_Finnish_FireSafety'},The <e1>fire performance</e1> of the external wall structure of a building no more than <e2>56 metres</e2> in height may also be demonstrated by a fullscale test.,none,annotated
+e874f337-2067-4e77-ad32-c3b857f40e7a_11,,,"If the <e1>travel distance</e1> exceeds <e2>20 litres per second</e2>, the total minimum width of the exits shall be calculated by increasing the original 1,200 millimetres by 400 millimetres for each additional group of 60 people.",greater,synthetic
+a235c68f-ae44-4770-b005-4e9d7b659eb7_3,,,All cavity walls should have leaves at least 90mm thick and cavities at least <e1>25mm</e1> <e2>total flow rate</e2>.,greater-equal,synthetic
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_6,,,"In buildings more than 9 metres and at most 28 metres in height, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than <e1>ten millimetres</e1> in <e2>automatic flow adjustment</e2>, these must be accessible via the interior.",greater,synthetic
+0da52584-1b37-48b5-840f-3795ae695275_9,,,the minimum clear dimensions of the platform are: <e1>0.7W/(m2K)</e1> <e2>maximum capacity</e2> and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+7e369e4c-7768-4a7a-bd9c-41e2aa037b43,The air flows shall be designed so that the average carbon monoxide concentration in a parking garage for motor vehicles during the hour of use assessed as the most critical does not exceed 35 mg/m3 (30 ppm).,{'ID': '61_Finnish_Health-IndoorClimateAndVentilation'},The <e1>air flows</e1> shall be <e2>designed</e2> so that the average carbon monoxide concentration in a parking garage for motor vehicles during the hour of use assessed as the most critical does not exceed 35 mg/m3 (30 ppm).,necessity,annotated
+05864826-21ef-4ae7-9af8-2aaeffc7267a_7,,,Modular and portable buildings with a planned service life of more than two years but with an <e1>reception</e1> in a single location of less than <e2>Five ventilators</e2> should be shown to comply with the energy efficiency requirements.,less,synthetic
+8db97194-2e07-415d-a4e0-1f32790d1d8a,"U-values should be assessed for the whole thermal element (e.g. in the caseof a window, the combined performance of the glazing and the frame).",{'ID': '123_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>U-values</e1> should be <e2>assessed for the whole thermal element</e2> (e.g. in the caseof a window, the combined performance of the glazing and the frame).",necessity,annotated
+8364a5f1-f80e-484c-9f38-bffc6f4c1876_7,,,"Where communal parking is provided to blocks of flats, at least <e1>200 millimetres</e1> standard <e2>passenger lift</e2> is provided close to the communal entrance of each core of the block (or to the lift core where the parking bay is internal).",greater-equal,synthetic
+60024014-cb6a-4a53-9b12-9497e0a1e5e8,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",{'ID': '85_Finnish_Health-IndoorClimateAndVentilation'},"Extract air from toilets, washrooms and <e1>cleaning spaces</e1> may be conducted to vertical ducts for <e2>extract air categories</e2> 1 and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",none,annotated
+a064e2ec-0793-4312-a45a-1eea61b17583,A system for purge ventilation should be provided in each habitable room.,{'ID': '46_UK_DocF_V1_Ventilation'},A <e1>system for purge ventilation</e1> should be provided in each <e2>habitable room</e2>.,necessity,annotated
+0ea1e862-2434-4fc8-97a2-b076c992ef20_2,,,"The <e1>energy savings</e1> of an exit must be at least <e2>2.5 ties/m2</e2> and its free height must be at least 2,100 millimetres.",greater-equal,synthetic
+96b38b2d-e67c-457c-86d4-2a47a1b834b1,"Drawings: all relevant drawings should be provided to clearly identify the position, continuity and extent of the air barrier.",{'ID': '176_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Drawings: all relevant <e1>drawings</e1> should be <e2>provided to clearly identify the position, continuity and extent of the air barrier</e2>.",necessity,annotated
+a8b3e54e-902c-4502-99a2-8c41d46f1416,"If there are more than 60 chairs in a space, they must be linked to one another in at least four groups, unless the chairs are placed around tables.",{'ID': '106_Finnish_SafetyOfUse'},"If there are more than <e1>60</e1> <e2>chairs</e2> in a space, they must be linked to one another in at least four groups, unless the chairs are placed around tables.",greater,annotated
+5f675f4f-74de-4d0f-ae92-c3500d2d952e,The actual equivalent area and location of installed background ventilators should be recorded.,{'ID': '189_UK_DocF_V1_Ventilation'},The actual equivalent area and location of <e1>installed</e1> <e2>background ventilators</e2> should be recorded.,selection,annotated
+a387fcb8-ead2-4094-9be9-72d783468b33,"If the area of windows, roof windows, rooflights and doors exceeds 25 of the total floor area of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",{'ID': '422_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If the <e1>area</e1> of <e2>windows</e2>, roof windows, rooflights and doors exceeds 25 of the total floor area of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",part-of,annotated
+5577528f-8fa0-4ca3-96f6-ea418091cb86_7,,,The side edges of stairs and landings must be fitted with a raised camber to prevent slipping over the edge if a cube measuring more than <e1>9mm</e1> in <e2>design temperature difference</e2> is able to pass through the opening between the plane level and the handrail or wall.,greater,synthetic
+86831830-e7f0-4b90-aa27-dc0542b7ba4d_1,,,"If a residential block of flats does not have a lift, the stairs between floor levels must have natural light and at least <e1>20 litres per second</e1> <e2>thresholds</e2>.",greater-equal,synthetic
+1d10aa43-7650-46b1-83c3-867f212ab9c3,Background ventilators should meet the performance standards for both of the following: a. air flow from outside to inside the dwelling; b. air flow from inside the dwelling to outside.,{'ID': '58_UK_DocF_V1_Ventilation'},Background ventilators should meet the <e1>performance standards</e1> for both of the following: a. air flow from outside to inside the dwelling; b. <e2>air flow</e2> from inside the dwelling to outside.,part-of,annotated
+a5e9c36f-358f-4375-943c-6d5b89c82647,"Any abrupt level differences of over 0.7 metres and any precipices located in the vicinity of common play and recreation areas associated with buildings with more than two dwellings must be indicated by appropriate barriers or suitable planted areas, or outfitted with a base that cushions any fall.",{'ID': '92_Finnish_SafetyOfUse'},"Any abrupt level differences of over 0.7 metres and any precipices located in the <e1>vicinity</e1> of common play and recreation <e2>areas</e2> associated with buildings with more than two dwellings must be indicated by appropriate barriers or suitable planted areas, or outfitted with a base that cushions any fall.",part-of,annotated
+09b2a395-5293-4b7d-82d4-5312482d59e9,"Door entry controls, where provided, are mounted 900-1000mm above finished ground level, and at least 300mm away from any projecting corner.",{'ID': '46_UK_DocM_V1_AccessAndUseOfBuildings'},"Door entry controls, where provided, are <e1>mounted</e1> 900-1000mm above finished <e2>ground level</e2>, and at least 300mm away from any projecting corner.",none,annotated
+b0e99ac5-9cbc-4beb-b8ff-85383ae70ea8,"The approach route should be safe and convenient, adopt the shallowest gradient that can reasonably be achieved and be step-free, irrespective of the storey on which the dwelling is located.",{'ID': '40_UK_DocM_V1_AccessAndUseOfBuildings'},"The <e1>approach route</e1> should be safe and convenient, adopt the shallowest gradient that can reasonably be achieved and be <e2>step-free</e2>, irrespective of the storey on which the dwelling is located.",necessity,annotated
+86350df0-a40e-412b-a301-004524d56736,"For wet heating systems in new dwellings with a floor area of 150m2 or greater, a minimum of two independently controlled heating circuits should be provided.",{'ID': '246_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For wet heating systems in <e1>new</e1> dwellings with a floor area of 150m2 or greater, a minimum of <e2>two</e2> independently controlled heating circuits should be provided.",none,annotated
+c384013b-c40f-4925-acbe-465e1ca5bc13_5,,,<e1>certain proportion</e1> <e2>air barriers</e2> per detail should be recorded.,equal,synthetic
+f0c72b35-5a0a-4554-8713-96f6f73a67f1_0,,,A cube with <e1>entrance level</e1> of no more than <e2>0.2</e2> may pass between the lower edge of a barriers protective part and the landing or the upper surface or edge of a step.,less-equal,synthetic
+4e8c5c50-44af-48f6-b959-e6f9b31afa1e,"If the planned time of use of a modular or portable building in a single location is less than two years, the only practical heating technology may be electric resistance heating.",{'ID': '89_UK_DocM_V2_AccessAndUseOfBuildings'},"If the planned time of use of a modular or portable building in a single location is less than two years, the only practical <e1>heating technology</e1> may be <e2>electric resistance heating</e2>.",equal,annotated
+38020928-c137-486e-88d7-c8feec038c99,A building must be provided with a fire wall if it is situated adjacent to a neighbouring building or so close to a neighbouring building that the spread of fire is evident.,{'ID': '189_Finnish_FireSafety'},A building must be provided with a fire wall if <e1>it</e1> is <e2>situated adjacent to a neighbouring building</e2> or so close to a neighbouring building that the spread of fire is evident.,selection,annotated
+8101fa0e-645c-4a83-a6ab-66c45e94bf67,"If the dwelling already has mechanical ventilation, the centralised system could be extended into the additional room.",{'ID': '155_UK_DocF_V1_Ventilation'},"If the dwelling already has mechanical ventilation, the <e1>centralised system</e1> could be <e2>extended into the additional room</e2>.",necessity,annotated
+8207751f-13b8-4fe3-9bfe-4423093d4905,A  building  with  dwellings  or  accommodation  or  patient  rooms  shall  be  designed  and implemented so that the reverberation time of the staircase and exit route is no more than 1.3 seconds.,{'ID': '26_Finnish_AcousticEnvironment'},A building with dwellings or accommodation or <e1>patient rooms</e1> shall be designed and implemented so that the <e2>reverberation time</e2> of the staircase and exit route is no more than 1.3 seconds.,none,annotated
+750a4f32-2581-4040-ac8b-8e4ad59abd56,Extract ventilators in sanitary accommodation should be capable of continuous operation if required.,{'ID': '48_UK_DocF_V2_Ventilation'},<e1>Extract ventilators</e1> in <e2>sanitary accommodation</e2> should be capable of continuous operation if required.,part-of,annotated
+e21fa967-934e-4a29-a66d-252fdbbf928f_0,,,"If the parasitic energy use is unknown, an <e1>Leakage</e1> of <e2>270 millimetres</e2> should be made for any control system.",equal,synthetic
+83ff563b-077a-4849-b526-382fbb012647,The breaking of a glass structure or other light-permeable structure of a building must not cause a danger of falling or a danger of injury from fragments falling onto persons below.,{'ID': '67_Finnish_SafetyOfUse'},The <e1>breaking</e1> of a <e2>glass structure</e2> or other light-permeable structure of a building must not cause a danger of falling or a danger of injury from fragments falling onto persons below.,part-of,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_0,,,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the <e1>Ventilation</e1> of these must be at least <e2>10 kN</e2>.",greater-equal,synthetic
+eeb4239f-3819-475c-ad20-756bed80c4ff_5,,,"In reference heat loss calculations, the value used as the <e1>category</e1> of the buildings ventilation system shall be <e2>4</e2>.",equal,synthetic
+009e12eb-db83-485c-9ffc-e1f462251109_10,,,"Each air terminal should have a <e1>storm water sewers</e1> of at least <e2>1,200 MJ/m2</e2> of the free area of its associated duct.",greater-equal,synthetic
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the <e1>premises</e1> to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. <e2>toilet facility</e2> intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",necessity,annotated
+fb5d3054-4911-4049-ba09-1c3e80f9c07c_5,,,"The tread of steps in uncovered or unheated outdoor staircases must be no less than 390 millimetres, and the <e1>service</e1> may be no more than <e2>1 in 40</e2>.",less-equal,synthetic
+a4fccc69-c508-4405-92aa-2cfe36bfca39,Exits of parts of the building separated by a fire wall must be constructed separately so that in the event of a fire there is no need to use any door that may be in the fire wall.,{'ID': '209_Finnish_FireSafety'},<e1>Exits</e1> of parts of the building separated by a fire wall must be <e2>constructed separately so that in the event of a fire there is no need to use any door that may be in the fire wall</e2>.,necessity,annotated
+43e26628-8b62-4cc6-91e2-284335df1564_11,,,"In rooms used for sleeping or rest, the <e1>pitch</e1> may not exceed <e2>10</e2>.",less-equal,synthetic
+e7cc3da8-211a-4244-b711-210a912ca2ac,Ground floors and those in contact with the outside of the dwelling should be insulated to limit heat losses to not more than 10W/m2.,{'ID': '302_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Ground floors</e1> and those in contact with the outside of the dwelling should be <e2>insulated to limit heat losses to not more than 10W/m2</e2>.,necessity,annotated
+d34c0f60-8df0-4310-b5af-428c63225a6f,"After a period of non-use of at least eight hours, the water temperature may not exceed 24 degrees Celsius.",{'ID': '60_Finnish_Health-WaterAndSewerage'},"<e1>After a period of non-use of at least eight hours</e1>, the water temperature may not exceed <e2>24 degrees Celsius</e2>.",none,annotated
+bf798097-bb99-42d0-a73f-8cebab8fbeb8_3,,,"In the entrance halls and other indoor areas of administrative, service and business premises and in assembly areas, the <e1>natural light</e1> of the steps must be no more than <e2>600 millimetres</e2> and the tread must be no less than 300 millimetres.",less-equal,synthetic
+3c28dbd6-8a3d-4ede-ae08-89e4b5d69d60_7,,,The approach route is a minimum of 900mm wide with a maximum <e1>lengths</e1> of <e2>0.7 metres</e2>.,less-equal,synthetic
+05fdde92-d8af-42ad-963b-9019c69a8ab3_8,,,"For a timber frame where the intermediate floor structure breaches the external wall insulation, further insulation of the same <e1>calculation of primary energy and CO2 emissions</e1> as the <e2>Air handling units</e2> used in the external wall should be included within the depth of the intermediate floor structure.",equal,synthetic
+3c0a8ccb-d813-40fb-b69b-88250d3bc4ec_10,,,These fittings should not exceed a <e1>either side</e1> of <e2>two </e2>.,less-equal,synthetic
+12e545d1-64f4-45c9-a520-5b8a003eba0a,"If the dwelling has more than one exposed facade, the area of background ventilators on each facade should be similar, to allow cross-ventilation.",{'ID': '85_UK_DocF_V1_Ventilation'},"If the dwelling has more than one exposed facade, the area of <e1>background ventilators</e1> on each <e2>facade</e2> should be similar, to allow cross-ventilation.",part-of,annotated
+1913381b-a2cc-496e-9168-82ccf2a01d50,"In connection with repair and alteration work, the heat emitters connected to the domestic hot water ring duct may be replaced so that the heat emission capacity of the heat emitters to be installed does not exceed 200 Watts per room.",{'ID': '67_Finnish_Health-WaterAndSewerage'},"In connection with repair and alteration work, the heat emitters connected to the domestic hot water ring duct may be replaced so that the heat emission capacity of the heat emitters <e1>to be installed</e1> does not exceed <e2>200 Watts per room</e2>.",none,annotated
+5fa7daca-cb50-4397-a736-617e52d30187_6,,,"If efficiencies at below 30% are required and unavailable, the <e1>deep</e1> may be taken as equal to that at <e2>5m</e2>.",equal,synthetic
+10e66a84-25db-40a0-87d5-6297d0732fe4,The shutoff valves shall be located: 1) at each house; 2) at each apartment; 3) in vertical service pipes; 4) on both sides of devices installed in the service pipes; 5) before a device or fixture that is connected to the connector pipe;  6) on both sides of the water meters.,{'ID': '93_Finnish_Health-WaterAndSewerage'},The <e1>shutoff valves</e1> shall be located: 1) at each house; 2) at each apartment; 3) in vertical service pipes; 4) on <e2>both sides</e2> of devices installed in the service pipes; 5) before a device or fixture that is connected to the connector pipe; 6) on both sides of the water meters.,necessity,annotated
+0096a3bf-ac16-4a75-adf9-8c3f4a9b8610_8,,,The smaller <e1>heat exchanger area</e1> of each panel which can be either the width or height of the panel should be <e2>120</e2> or less.,less-equal,synthetic
+9415ae4b-7a74-4c70-a245-e4381c6d71bf,"At gables and party walls, insulation should extend to the wall; if the space between the wall and joist is less than 100mm, perimeter insulation may be required.",{'ID': '170_UK_DocL_V1_ConsrvationOfFuelAndPower'},"At gables and party walls, insulation should extend to the wall; if the <e1>space</e1> <e2>between the wall and joist</e2> is less than 100mm, perimeter insulation may be required.",selection,annotated
+9415ae4b-7a74-4c70-a245-e4381c6d71bf_5,,,"At gables and party walls, insulation should extend to the wall; if the <e1>Cavity walls</e1> between the wall and joist is less than <e2>850-1000mm</e2>, perimeter insulation may be required.",less,synthetic
+079db365-cfed-474e-9329-25349ac0db4a_1,,,"In connection with the door of an outside space of an individual dwelling the <e1>surfaces</e1> outside the door may be more than <e2>0.052083333</e2> if the level difference can, with reasonable effort, be eliminated with equipment in the outdoor space.",greater,synthetic
+0aaf71f0-a482-4a72-a407-0d6db79c7f6f_0,,,"In a building consisting primarily of one storey, no more than 200 m2 of fire-compartmented and no more than <e1>20 degrees Celsius</e1> of non-fire-compartmented <e2>energy savings</e2> that essentially relate to the business of the building may be located on the level of second storey.",less-equal,synthetic
+a387fcb8-ead2-4094-9be9-72d783468b33,"If the area of windows, roof windows, rooflights and doors exceeds 25 of the total floor area of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",{'ID': '422_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If the area of <e1>windows</e1>, roof windows, rooflights and doors exceeds 25 of the <e2>total floor area</e2> of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",none,annotated
+fa8a6d84-eb99-490e-8169-3c65353fb553_3,,,"For large roofs, where the smaller horizontal dimension of the roof is 50 m or more, and the topography is windswept, the value of the <e1>from the inside face of the wall</e1> shall be at least <e2>900mm</e2>.",greater-equal,synthetic
+517253f8-98b1-4821-8901-75124d3237db,"Consideration should be given to the provision of a second handrail on stairs in a wide range of building types, and particularly in schools, for use by children and people of short stature.",{'ID': '59_UK_DocM_V2_AccessAndUseOfBuildings'},"Consideration should be given to the provision of a <e1>second</e1> <e2>handrail</e2> on stairs in a wide range of building types, and particularly in schools, for use by children and people of short stature.",selection,annotated
+1de9d3e5-dee3-42c9-b929-80b7936f1642,The lift shall provide access to the entrance level and each level with entry to a dwelling or a space serving the use of the building.,{'ID': '33_Finnish_Accessibility'},The lift shall <e1>provide access</e1> to the <e2>entrance level</e2> and each level with entry to a dwelling or a space serving the use of the building.,selection,annotated
+0cafda73-ee3a-4a99-a224-2d142de63618,"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",{'ID': '238_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a wet <e1>heating system</e1> is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, <e2>emitters</e2> and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",selection,annotated
+333110c1-ba9e-4c1d-9249-6604f49ba09a,"The presence of doors, whether open or closed, should be apparent to visually impaired people through the careful choice of colour and material for the door and its surroundings.",{'ID': '91_UK_DocM_V2_AccessAndUseOfBuildings'},"The <e1>presence</e1> of <e2>doors</e2>, whether open or closed, should be apparent to visually impaired people through the careful choice of colour and material for the door and its surroundings.",part-of,annotated
+7f696221-52c9-4c52-8f90-74bd93c51299_11,,,This grippable handrail is 850-1000mm above the pitch line of the flight and <e1>limits</e1> at least <e2>13l/s</e2> beyond the top and bottom nosings.,greater-equal,synthetic
+c0a6d35c-cc20-428b-941d-c3e3e6365c74_5,,,"In a tier that is uninterrupted by cross-gangways, and where the <e1>value</e1> exceeds <e2>390 millimetres</e2>, use a maximum number of steps of 40.",greater,synthetic
+45338082-ca66-418b-8fe1-8f2be926f330,A cube of no more than 100 millimetres may pass between the stair steps.,{'ID': '52_Finnish_SafetyOfUse'},A cube of no more than <e1>100 millimetres</e1> may <e2>pass between the stair steps</e2>.,none,annotated
+f162906e-1097-420e-b2a0-dd746d5794c7,"Where controls are external to the heater, the system should be provided with a time switch/programmer and room thermostat, or programmable room thermostat.",{'ID': '265_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where controls are external to the heater, the system should be provided with a time switch/programmer and room thermostat, or <e1>programmable</e1> <e2>room thermostat</e2>.",selection,annotated
+7c44934c-61e1-4904-a493-1aa360ccc7d1,"The building shall be constructed so that the combined dead,imposed and wind loads are sustained and transmitted by it to the ground: (a) safely; and (b) without causing such deflection or deformation of any part of the building, or such movement of the ground, as will impair the stability of any part of another building.",{'ID': '1_UK_DocA_Structure'},"The building shall be constructed so that the <e1>combined dead,imposed and wind loads</e1> are <e2>sustained</e2> and transmitted by it to the ground: (a) safely; and (b) without causing such deflection or deformation of any part of the building, or such movement of the ground, as will impair the stability of any part of another building.",selection,annotated
+7e369e4c-7768-4a7a-bd9c-41e2aa037b43,The air flows shall be designed so that the average carbon monoxide concentration in a parking garage for motor vehicles during the hour of use assessed as the most critical does not exceed 35 mg/m3 (30 ppm).,{'ID': '61_Finnish_Health-IndoorClimateAndVentilation'},The air flows shall be designed so that the average carbon monoxide concentration in a <e1>parking garage</e1> <e2>for motor vehicles</e2> during the hour of use assessed as the most critical does not exceed 35 mg/m3 (30 ppm).,selection,annotated
+54f4e30f-d171-4156-ae87-7aed3541dd18,Insulated cavity closers should be used for all construction types.,{'ID': '165_UK_DocL_V1_ConsrvationOfFuelAndPower'},Insulated <e1>cavity closers</e1> should be <e2>used for all construction types</e2>.,necessity,annotated
+32f91d86-2cbf-4d57-ab93-5a28fd804df8,Signs indicating the location of a lifting device accessible by mobility-impaired people should be clearly visible from the building entrance.,{'ID': '104_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Signs</e1> indicating the location of a lifting device accessible by mobility-impaired people should be <e2>clearly visible from the building entrance</e2>.,necessity,annotated
+263dec16-c53e-4169-91d3-b6961fcda501,The water system shall be leakproof.,{'ID': '84_Finnish_Health-WaterAndSewerage'},The <e1>water system</e1> shall be <e2>leakproof</e2>.,necessity,annotated
+e6fcc89d-b55e-4536-9a24-c3c5f4015a0d,"All technically, functionally and economically feasible measures to improve the fabric of the building served by the service should be implemented.",{'ID': '455_UK_DocM_V2_AccessAndUseOfBuildings'},"All <e1>technically, functionally and economically feasible measures</e1> <e2>to improve the fabric of the building served by the service</e2> should be implemented.",selection,annotated
+f9de28ac-45bb-4400-9d9f-8afee73bd2e3,The number of appliances should not exceed one per 100m2 of dwelling floor area.,{'ID': '273_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>number of appliances</e1> should not exceed <e2>one per 100m2</e2> of dwelling floor area.,less-equal,annotated
+a387fcb8-ead2-4094-9be9-72d783468b33,"If the area of windows, roof windows, rooflights and doors exceeds 25 of the total floor area of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",{'ID': '422_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If the area of windows, roof windows, rooflights and doors exceeds 25 of the <e1>total floor area</e1> of the dwelling, compensating measures should be <e2>taken to improve the energy efficiency of the dwelling</e2>.",none,annotated
+675c4d48-3eef-463a-8516-edd71ee983e3,Adequate space should be available for access to maintain ventilation equipment.,{'ID': '110_UK_DocF_V1_Ventilation'},Adequate <e1>space</e1> should be <e2>available for access to maintain ventilation equipment</e2>.,necessity,annotated
+d925c189-860a-4fcb-ae88-d1cf8cc14fb8_5,,,"The tread of steps in covered or heated outdoor staircases must be no less than 300 millimetres, and the <e1>sum total</e1> may be no more than <e2>900 millimetres</e2>.",less-equal,synthetic
+19478a13-7457-4dd3-a394-744f826db7b0_5,,,"The handle to at least <e1>200 lux</e1> <e2>enduse categories</e2> in the principal living area is 700-1000mm above floor level, unless fitted with a remote opening device that is within this height range.",greater-equal,synthetic
+e4fb8d18-8dbc-4351-a2df-d87f880f476a,The fire resistance time requirement for balconies is half that of the load-bearing structures of the storey.,{'ID': '90_Finnish_FireSafety'},The fire resistance time requirement for balconies is half that of the <e1>load-bearing structures</e1> of the <e2>storey</e2>.,part-of,annotated
+710ef992-e187-4b1a-894b-e0e222f54359_5,,,"NOTE: For grid-supplied electricity, a <e1>number</e1> of <e2>0.2</e2> and primary energy factor of 1.501kWhPE/kWh should be used.",equal,synthetic
+06c2e0f7-69c8-47ec-bf31-9902ae9df7cf,"Provision shall be made for any windows, skylights, or any transparent or translucent walls, ceilings or roofs to be safely accessible for cleaning.",{'ID': '109_UK_DocK_ProtectionFromFalling'},"Provision shall be made for any windows, skylights, or any transparent or translucent walls, ceilings or <e1>roofs</e1> to <e2>be safely accessible for cleaning</e2>.",necessity,annotated
+6a553c19-481f-4947-9047-fd2c4d0daa44,"Any floors, walls and doors that have been installed to allow the potential liftway to be used as storage or for other purposes could be easily removed without structural alteration.",{'ID': '83_UK_DocM_V1_AccessAndUseOfBuildings'},"Any <e1>floors</e1>, walls and doors that have been <e2>installed to allow the potential liftway to be used as storage or for other purposes</e2> could be easily removed without structural alteration.",selection,annotated
+9ff8b8fd-5361-4c3d-9a7e-7459276c8df7_5,,,The <e1>elevation difference</e1> must not exceed the individual dwellings <e2>diameter</e2>.,less-equal,synthetic
+53e31e26-a39b-4047-a86e-bdb8021413e8_7,,,Window handles on windows that open outwards are not more than <e1>16/01/2023 00:00</e1> <e2>surfaces</e2> when the window is at its maximum openable angle.,less-equal,synthetic
+cea6e7bd-c494-4146-9f81-3fd2ed64a2a6,The slope of the floor surface in the seating area and access route may not exceed 8 per cent (1:12.5).,{'ID': '119_Finnish_SafetyOfUse'},The <e1>slope</e1> of the floor <e2>surface</e2> in the seating area and access route may not exceed 8 per cent (1:12.5).,part-of,annotated
+9618a274-45da-4e3e-87f0-21c2bfae4a8e_1,,,"A guardrail must be used at points with a <e1>extends</e1> of over <e2>two </e2>, if these can be accessed by children.",greater,synthetic
+6c789809-b1b8-429a-8fe2-8ce16f8a4b54_4,,,Air flows in the continuous working area of a parking garage for motor vehicles shall be designed so that the <e1>layers</e1> does not exceed <e2>850-1000mm</e2>.,less-equal,synthetic
+0cfe8c0e-45e4-4c4c-bf9b-906e26e28c75,"There should be sufficient space for people to approach the building, pass others who are travelling in the opposite direction and carry out all necessary manoeuvres.",{'ID': '43_UK_DocM_V2_AccessAndUseOfBuildings'},"There should be sufficient space for <e1>people</e1> to <e2>approach the building</e2>, pass others who are travelling in the opposite direction and carry out all necessary manoeuvres.",none,annotated
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_2,,,"In buildings more than 9 metres and at most <e1>adequate number</e1> in <e2>projection</e2>, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",less-equal,synthetic
+6d9a1e8e-6fe7-4234-951a-96fdc4598bd7_8,,,"If parking spaces are provided for a building, an adequate number of <e1>district cooling schemes</e1>, but at least <e2>50 m2</e2>, shall be intended for the use of a person with mobility and functional impairment.",greater-equal,synthetic
+0da52584-1b37-48b5-840f-3795ae695275_0,,,"the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where <e1>2,100 millimetres</e1> <e2>Window handles</e2> are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.",equal,synthetic
+99a53f17-48cb-4012-a47b-700761e0983b_5,,,Where a new building which is not a residential building or a mixed-use building has more than 10 parking spaces (a) <e1>15</e1> of those <e2>front doorset</e2> must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,equal,synthetic
+703e5c71-bd54-4267-acf4-fa7db1e70d49,"Any sound system in an auditorium, a restaurant, a conference facility, a facility for festive occasions, a teaching facility or other similar assembly facility or a public service facility shall have an induction loop or a similar sound transmission system.",{'ID': '67_Finnish_Accessibility'},"Any <e1>sound system</e1> in an auditorium, a restaurant, a conference facility, a facility for festive occasions, a teaching facility or other similar assembly facility or a public service facility shall have an <e2>induction loop</e2> or a similar sound transmission system.",necessity,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_0,,,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under <e1>insulating performance</e1> <e2>1.3 seconds</e2>.",equal,synthetic
+d8a06af7-3a6b-4d68-8bba-342aac6d3ac0,Water pipes and sewers installed in the ground shall be identifiable and they shall be located separate from one another.,{'ID': '146_Finnish_Health-WaterAndSewerage'},Water pipes and sewers <e1>installed in the ground</e1> shall be <e2>identifiable</e2> and they shall be located separate from one another.,none,annotated
+99a53f17-48cb-4012-a47b-700761e0983b_9,,,Where a new building which is not a residential building or a mixed-use building has more than <e1>0.15 dm3/s per m2</e1> <e2>Ramps</e2> (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,greater,synthetic
+65b5e58d-ead5-43fb-831e-3a42487fa227,"People with hearing impairments should be able to participate fully in conferences, committee meetings and study groups.",{'ID': '133_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>People</e1> <e2>with hearing impairments</e2> should be able to participate fully in conferences, committee meetings and study groups.",selection,annotated
+ff3e8f86-1542-4f54-a776-cfdc8482bad7_11,,,The <e1>room temperature</e1> of an air conditioner working in cooling mode should be a minimum of <e2>75 light source lumens per circuit-watt</e2>.,greater-equal,synthetic
+f27c9fb4-dc28-494c-a277-a51360cdfdb8,A handrail and its ending must be shaped safely and must continue past the start and end points of the structure.,{'ID': '57_Finnish_SafetyOfUse'},A handrail and <e1>its</e1> <e2>ending</e2> must be shaped safely and must continue past the start and end points of the structure.,part-of,annotated
+9618a274-45da-4e3e-87f0-21c2bfae4a8e_9,,,"A guardrail must be used at points with a <e1>slope</e1> of over <e2>0.2</e2>, if these can be accessed by children.",greater,synthetic
+81314489-dcd9-410f-9b15-595b87e7c8f9_1,,,"The resilient layer should be timber sheathing at least <e1>0.2</e1> <e2>design temperature difference</e2>, expanded metal or a similar resilient material.",greater-equal,synthetic
+ef4ec541-e1a7-47d4-9a83-94715d8900ba,"Where one or more parking spaces are within a covered car park, the requirement to install electric vehicle charge points should be met by installing charge points in parking spaces that are not within a covered car park.",{'ID': '89_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where <e1>one</e1> or more parking spaces are within a covered car park, the <e2>requirement</e2> to install electric vehicle charge points should be met by installing charge points in parking spaces that are not within a covered car park.",none,annotated
+76acc6bd-50c0-4f3f-b015-42e171ec6ce7_10,,,<e1>650mm</e1> <e2>pressure sewer</e2> must be installed.,equal,synthetic
+6efbae9b-e306-4005-8881-aed97c54e405,Leakage from a pressure sewer located in a groundwater zone shall be detectable.,{'ID': '145_Finnish_Health-WaterAndSewerage'},<e1>Leakage</e1> from a pressure sewer located in a groundwater zone shall be <e2>detectable</e2>.,necessity,annotated
+2ca092ec-4425-4552-a389-fd0dadfbd154_11,,,NOTE: A floor level with a <e1>distance of the basement storey floor from the entry level</e1> of <e2>3</e2> or steeper should be designed as a ramp.,greater-equal,synthetic
+956efc87-87de-4d3c-99fb-dc58eab9353b_7,,,A dwelling that is intended for sheltered housing or supported housing of a person with mobility or functional impairment shall have at least one toilet and washing facility which has a free space with a <e1>sizes</e1> of at least <e2>0.05</e2>.,greater-equal,synthetic
+d687ab7a-74e0-4d2e-8aad-27e009651634,Joints between vertical and horizontal structures shall always be designed without a reduction factor.,{'ID': '13_Finnish_StabilityOfStructures'},<e1>Joints</e1> <e2>between vertical and horizontal structures</e2> shall always be designed without a reduction factor.,selection,annotated
+3f7c10d1-d801-4351-bc85-187cf8cffeb3,The water vapour resistance and air tightness of external walls and their various layers as well as the structures attached to the external wall and joints to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,{'ID': '96_Finnish_Health-Humidity'},The water vapour resistance and air tightness of external walls and their various layers as well as the structures attached to the external <e1>wall</e1> and joints to the external wall must <e2>prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures</e2>.,none,annotated
+d43e4877-601c-43eb-9d33-96945754374b,Good acoustic design should be employed to achieve an acoustic environment that is neither too reverberant nor too absorbent so that announcements and conversations can be heard clearly.,{'ID': '99_UK_DocM_V2_AccessAndUseOfBuildings'},Good acoustic design should be employed to achieve an <e1>acoustic environment</e1> that is neither too reverberant nor too absorbent <e2>so that announcements and conversations can be heard clearly</e2>.,none,annotated
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77,Skirtings totalling up to 50mm total thickness and shallow projecting ducts or casings above 1800mm may be discounted when measuring clear width.,{'ID': '131_UK_DocM_V1_AccessAndUseOfBuildings'},Skirtings totalling up to 50mm total thickness and shallow projecting <e1>ducts</e1> or casings above <e2>1800mm</e2> may be discounted when measuring clear width.,greater,annotated
+7e34700e-92de-4b00-a820-f4085a2e186c,"If the free gap between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than 2 metres, the wall in question must be class EI 15.",{'ID': '135_Finnish_FireSafety'},"If the free gap between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than 2 metres, the <e1>wall</e1> in question must be class <e2>EI 15</e2>.",none,annotated
+a86b58e8-046f-44b7-8e1b-00c876c8c647,"Parapets in categories A to E and panel parts of walls acting as parapets, as well as their fasteners, shall be designed to the concentrated load Qk = 0.3 kN acting on a random spot.",{'ID': '30_Finnish_StabilityOfStructures'},"<e1>Parapets</e1> in <e2>categories</e2> A to E and panel parts of walls acting as parapets, as well as their fasteners, shall be designed to the concentrated load Qk = 0.3 kN acting on a random spot.",part-of,annotated
+6543949e-dd47-4365-b5a9-d952bf233cd7,"Any manual high rate controls should be provided locally to the spaces being served, e.g. bathrooms and kitchens.",{'ID': '66_UK_DocF_V1_Ventilation'},"Any <e1>manual</e1> <e2>high rate controls</e2> should be provided locally to the spaces being served, e.g. bathrooms and kitchens.",selection,annotated
+36650de0-ef3c-4fd1-8199-f47c0e576076_0,,,the <e1>length</e1> of the platform does not exceed <e2>4</e2>.,less-equal,synthetic
+64695439-3458-4d43-8e7b-a2ba75075cea,"There must be safe and easily accessible, uninterrupted access routes to any chimneys, ventilation equipment and other building equipment and structural elements that are located on the roof of the building and that must be accessed regularly.",{'ID': '124_Finnish_SafetyOfUse'},"There must be safe and easily accessible, uninterrupted access routes to any chimneys, ventilation equipment and other <e1>building</e1> equipment and <e2>structural elements</e2> that are located on the roof of the building and that must be accessed regularly.",part-of,annotated
+f02161e2-1942-4ddf-9627-e3343df63909,"System controls should be wired so that when there is no demand for space heating, the heating appliance and pump are switched off.",{'ID': '214_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>System controls</e1> should be <e2>wired</e2> so that when there is no demand for space heating, the heating appliance and pump are switched off.",necessity,annotated
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be class E 15.",{'ID': '134_Finnish_FireSafety'},"The <e1>fire compartmenting requirement</e1> for the <e2>balcony slab</e2> of a glazed balcony of a building exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be class E 15.",part-of,annotated
+8aa4b706-1659-4e30-a4fe-e7f33efe3241,All three parts of the compliance checklist should be completed.,{'ID': '108_UK_DocO_Overheating'},All <e1>three</e1> <e2>parts</e2> of the compliance checklist should be completed.,equal,annotated
+7e34700e-92de-4b00-a820-f4085a2e186c_10,,,"If the <e1>stairs</e1> between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than <e2>20</e2>, the wall in question must be class EI 15.",less,synthetic
+26980508-105c-49db-8595-bf001a48d757,"In rooms with no fixed seats or furnishings, the number of persons shall be calculated to be two persons per square metre.",{'ID': '103_Finnish_SafetyOfUse'},"In <e1>rooms</e1> with no fixed seats or <e2>furnishings</e2>, the number of persons shall be calculated to be two persons per square metre.",not-part-of,annotated
+dcc583b1-8c4c-42cf-a1ed-e8907de56254_6,,,"The <e1>target fabric energy efficiency rate</e1> of the indoor steps of other spaces intended for everyday use may be no more than <e2>180kW</e2>, and the tread must be no less than 270 millimetres.",less-equal,synthetic
+09b2a395-5293-4b7d-82d4-5312482d59e9,"Door entry controls, where provided, are mounted 900-1000mm above finished ground level, and at least 300mm away from any projecting corner.",{'ID': '46_UK_DocM_V1_AccessAndUseOfBuildings'},"Door entry controls, where provided, are <e1>mounted</e1> <e2>900-1000mm</e2> above finished ground level, and at least 300mm away from any projecting corner.",selection,annotated
+cf35d4a4-3170-421b-9be1-b68d928eed1d_11,,,"A roof with a <e1>one side</e1> greater than <e2>230mm</e2> must be constructed making appropriate use of walkways, roof ladders, safety ladders, roof stairs, roof treads and foot rails.",greater,synthetic
+569c7958-b7d6-4b9c-9dd9-13307e95e59b_3,,,"For ducted systems that are served by fans with a <e1>elevation difference</e1> greater than <e2>3</e2>, ductwork leakage tests should be carried out.",greater,synthetic
+baee716c-b8c2-4500-b4de-63fa11f007b1_11,,,A minimum of one in <e1>4</e1> of the remaining <e2>toileting facilities</e2> must have access to cable routes.,equal,synthetic
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_4,,,"In buildings more than <e1>220 millimetres</e1> and at most 28 metres in <e2>location</e2>, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",greater,synthetic
+d728a9c8-0302-4bd1-b69b-0daeefce30d1,"Where a service building has a reception or sales counter, there should be convenient access to it and part of it should be at a level suitable for a wheelchair user or a seated person.",{'ID': '84_UK_DocM_V2_AccessAndUseOfBuildings'},"Where a service building has a reception or sales counter, there should be convenient <e1>access</e1> to it and <e2>part</e2> of it should be at a level suitable for a wheelchair user or a seated person.",none,annotated
+d8066a73-49c2-4e99-825a-b49b9b2ba67d_3,,,A landing measuring at least <e1>0.35W/(m2K)</e1> in <e2>visual contrast</e2> must be reserved in front of and behind a door located in an exit route.,greater-equal,synthetic
+203faa23-7b71-47c9-a6e5-2333ac45389e_9,,,"The <e1>intended purpose</e1> of the indoor steps of dwelling units and living quarters may be no more than <e2>800 millimetres</e2>, and the tread must be no less than 250 millimetres.",less-equal,synthetic
+b5d2186d-338d-40b6-b3b4-7fadf3cfd4e0,"For district cooling schemes, the CO2 and primary energy content of the cooling energy supplied should be calculated.",{'ID': '286_UK_DocM_V2_AccessAndUseOfBuildings'},"For district cooling schemes, the CO2 and <e1>primary energy content</e1> of the <e2>cooling energy</e2> supplied should be calculated.",part-of,annotated
+2cc3d5b0-d3b4-45f2-a00d-838fd3f9abbb_11,,,"There should be a <e1>common space</e1>, in the absence of tobacco smoke or other excessive pollutants, of <e2>1800mm</e2>.",equal,synthetic
+1913381b-a2cc-496e-9168-82ccf2a01d50,"In connection with repair and alteration work, the heat emitters connected to the domestic hot water ring duct may be replaced so that the heat emission capacity of the heat emitters to be installed does not exceed 200 Watts per room.",{'ID': '67_Finnish_Health-WaterAndSewerage'},"In connection with repair and alteration work, the <e1>heat emitters</e1> connected to the domestic hot water ring duct may be replaced so that the heat emission capacity of the <e2>heat emitters</e2> to be installed does not exceed 200 Watts per room.",none,annotated
+977ccb7b-4580-4ea3-9ea4-5057925c9854,"NOTE: The surface area of the whole building must be included when assessing whether the works constitute a major renovation, even if the building is mixed use.",{'ID': '124_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"NOTE: The surface area of the whole <e1>building</e1> must be <e2>included when assessing whether the works constitute a major renovation</e2>, even if the building is mixed use.",none,annotated
+81f14fc1-af5d-45e8-8725-94d2510e4701,"A dwelling that is intended for service housing or supported housing of a person with mobility and functional impairment shall, irrespective of the number of storeys in the building, have a turning  space  with  a  diameter  of  at  least  1,500  millimetres  in  the  hallway  and  kitchen.",{'ID': '29_Finnish_Accessibility'},"A dwelling that is <e1>intended for service housing or supported housing of a person with mobility and functional impairment</e1> shall, irrespective of the number of storeys in the building, have a turning space with a diameter of at least 1,500 millimetres in the hallway and <e2>kitchen</e2>.",none,annotated
+23cff3c3-1251-4c5f-9fd9-8f52d25eb494,Gasfired boilers and multi-stage oilfired boilers with an output of more than 500kW should have fully modulating burner controls.,{'ID': '252_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Gasfired boilers</e1> and multi-stage oilfired boilers with an <e2>output</e2> of more than 500kW should have fully modulating burner controls.,selection,annotated
+2af8ee5f-9d05-4023-9365-d093ebdfba1f,"Where building work is carried out in a kitchen or bathroom, any existing fans (including cooker hoods, where they extract to the outside) should be retained or replaced.",{'ID': '168_UK_DocF_V1_Ventilation'},"Where building work is carried out in a <e1>kitchen</e1> or bathroom, any <e2>existing</e2> fans (including cooker hoods, where they extract to the outside) should be retained or replaced.",none,annotated
+f420ae57-5656-4558-b1a3-1079e46bf6cc,"In the case of the storey-level door of a dwelling, or if the number of people evacuating through the door exceeds 60, doors must open in the direction of the exit.",{'ID': '223_Finnish_FireSafety'},"In the case of the <e1>storey-level</e1> <e2>door</e2> of a dwelling, or if the number of people evacuating through the door exceeds 60, doors must open in the direction of the exit.",selection,annotated
+19478a13-7457-4dd3-a394-744f826db7b0_10,,,"The handle to at least <e1>between 550mm and 700mm</e1> <e2>sanitary accommodation</e2> in the principal living area is 700-1000mm above floor level, unless fitted with a remote opening device that is within this height range.",greater-equal,synthetic
+a8b3e54e-902c-4502-99a2-8c41d46f1416,"If there are more than 60 chairs in a space, they must be linked to one another in at least four groups, unless the chairs are placed around tables.",{'ID': '106_Finnish_SafetyOfUse'},"If there are more than 60 chairs in a space, <e1>they</e1> must be <e2>linked to one another in at least four groups</e2>, unless the chairs are placed around tables.",necessity,annotated
+d6a2b6b7-57d2-449d-89f5-56d3df4755e2,Any radiator or towel rail should be clear of all access zones.,{'ID': '56_UK_DocM_V1_AccessAndUseOfBuildings'},Any <e1>radiator</e1> or towel rail should be <e2>clear of all access zones</e2>.,necessity,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_3,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the <e1>dwelling fabric energy efficiency rate</e1> from these spaces does not exceed <e2>180kW</e2> of the total air flow in the vertical duct.",less-equal,synthetic
+12907c6f-e734-436d-a7de-c8a1626fbe92,"Both:the area of rooflights exceeds 20 of the area of the roof, and the design solar load exceeds 25W/m2.",{'ID': '496_UK_DocM_V2_AccessAndUseOfBuildings'},"Both:the <e1>area</e1> of <e2>rooflights</e2> exceeds 20 of the area of the roof, and the design solar load exceeds 25W/m2.",part-of,annotated
+1320873f-de9b-4c55-a7c0-67f545c4a46e,"All access routes to principal, or alternative accessible, entrances should be surfaced so that people are able to travel along them easily, without excessive effort and without the risk of tripping or falling.",{'ID': '42_UK_DocM_V2_AccessAndUseOfBuildings'},"All <e1>access routes</e1> to principal, or alternative accessible, <e2>entrances</e2> should be surfaced so that people are able to travel along them easily, without excessive effort and without the risk of tripping or falling.",part-of,annotated
+d728a9c8-0302-4bd1-b69b-0daeefce30d1,"Where a service building has a reception or sales counter, there should be convenient access to it and part of it should be at a level suitable for a wheelchair user or a seated person.",{'ID': '84_UK_DocM_V2_AccessAndUseOfBuildings'},"Where a service building has a reception or <e1>sales counter</e1>, there should be convenient access to it and <e2>part</e2> of it should be at a level suitable for a wheelchair user or a seated person.",none,annotated
+0cafda73-ee3a-4a99-a224-2d142de63618,"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",{'ID': '238_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the <e1>system</e1> including <e2>pipework</e2> and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",selection,annotated
+636bce88-fd3b-4e5a-9f6a-4aa0d3d1bfa4_9,,,"Where a new building contains more than <e1>300 litres</e1> <e2>audit</e2>, a common access point for a gigabit-capable public electronic communications network is required as a part of the buildings gigabit-ready physical infrastructure.",greater,synthetic
+103f99ad-884b-4bae-9f22-ccb1c5bc3d26_6,,,"In an open garage of no more than <e1>0.7W/(m2K)</e1> <e2>fans (including cooker hoods, where they extract to the outside)</e2>, the maximum area may be used as the surface area of the storeys, even though the driveways between the various storeys are combined.",less-equal,synthetic
+e15250c0-1279-4d29-a1ec-31560b045007_7,,,<e1>structural elements</e1> of basement storeys must not be connected to fire and smoke-proof <e2>Water</e2>.,not-part-of,synthetic
+f420ae57-5656-4558-b1a3-1079e46bf6cc,"In the case of the storey-level door of a dwelling, or if the number of people evacuating through the door exceeds 60, doors must open in the direction of the exit.",{'ID': '223_Finnish_FireSafety'},"In the case of the storey-level <e1>door</e1> of a dwelling, or if the number of people evacuating through the door exceeds <e2>60</e2>, doors must open in the direction of the exit.",none,annotated
+2a256a9c-0b8a-4acf-87e1-86a5857f36a3_4,,,"Where a driveway forms all, or part of, the approach route, an <e1>all</e1> of at least <e2>18 dm3/s</e2> wide should be provided so that a wheelchair user can pass a parked car.",greater-equal,synthetic
+2633c957-07b4-4caa-a9d6-5acbac16b0b0_0,,,NOTE: Linear interpolation should be used to determine efficiencies between manufacturers declared efficiencies at 30 and <e1>20C</e1> <e2>inaccuracies</e2>.,equal,synthetic
+4470dde4-6422-4c13-9781-de68c3e075dc_4,,,"The outdoor <e1>thermal integrity</e1> of a dwelling unit, however, shall be designed to be a minimum of <e2>13l/s</e2>.",greater-equal,synthetic
+a4dc06ab-99c3-4c8b-b295-eb3e6a64320a_4,,,"The free <e1>energy performance</e1> from the ground or from the surface of a driveway or walkway of the lower edge of a structural element, device or equipment protruding from the building, such as a balcony, bay window, sign, lighting device or awning, must be at least <e2>1 in 40</e2>, unless the area is protected so as to prevent the danger of collision.",greater-equal,synthetic
+f439dcde-3cf9-4b40-b555-a2107ae5559f,"If  the  circulation  piping  is  located inside the building envelope, 50 of the calculated domestic hot water circulation heat loss shall  be  added  to  the  thermal  load  of  the  spaces  of  the  building.",{'ID': '104_Finnish_EnergyEfficiency'},"If the <e1>circulation piping</e1> is <e2>located inside the building envelope</e2>, 50 of the calculated domestic hot water circulation heat loss shall be added to the thermal load of the spaces of the building.",selection,annotated
+eccc60e7-3d76-46c0-a9d9-e398bf3e475a,The part of the dwelling above ground level should be considered separately.,{'ID': '71_UK_DocF_V1_Ventilation'},The <e1>part</e1> of the dwelling above ground level should be <e2>considered separately</e2>.,necessity,annotated
+aa774d9d-2414-4e6f-9c4e-9b7c5abde23b,The outputs of any renewable systems should be separately monitored.,{'ID': '228_UK_DocM_V2_AccessAndUseOfBuildings'},The outputs of any renewable <e1>systems</e1> should be <e2>separately monitored</e2>.,necessity,annotated
+74002ed3-548e-4e2f-8835-be76e643c67d,NOTE 2: Double doors effectively provide nibs where each leaf is at least 300mm wide.,{'ID': '51_UK_DocM_V1_AccessAndUseOfBuildings'},NOTE 2: Double doors effectively provide <e1>nibs</e1> where each <e2>leaf</e2> is at least 300mm wide.,part-of,annotated
+d925c189-860a-4fcb-ae88-d1cf8cc14fb8_7,,,"The <e1>thickness</e1> of steps in covered or heated outdoor staircases must be no less than <e2>65mm</e2>, and the riser may be no more than 160 millimetres.",greater-equal,synthetic
+164122ed-c7ac-4cf8-8a54-3d56c144f78d_4,,,"In general, the findings indicate that there should be at least the same number of <e1>exterior wall</e1> as <e2>manifolds</e2> and for some building types, e.g. large retail buildings, at least twice as many.",greater-equal,synthetic
+36650de0-ef3c-4fd1-8199-f47c0e576076_6,,,the <e1>indoor and outdoor conditions</e1> of the platform does not exceed <e2>200 m2</e2>.,less-equal,synthetic
+7ca3a924-dd3a-450e-af24-4d456d6c1b32,"Wet room waterproofing must form a whole which is impermeable on all waterproofed surfaces as well as on their seams, penetrations and joints.",{'ID': '113_Finnish_Health-Humidity'},"<e1>Wet room</e1> waterproofing must <e2>form a whole which is impermeable on all waterproofed surfaces as well as on their seams, penetrations and joints</e2>.",none,annotated
+2ca092ec-4425-4552-a389-fd0dadfbd154,NOTE: A floor level with a gradient of 1:20 or steeper should be designed as a ramp.,{'ID': '54_UK_DocK_ProtectionFromFalling'},NOTE: A <e1>floor level</e1> with a gradient of 1:20 or steeper should be <e2>designed as a ramp</e2>.,necessity,annotated
+fa8a6d84-eb99-490e-8169-3c65353fb553,"For large roofs, where the smaller horizontal dimension of the roof is 50 m or more, and the topography is windswept, the value of the exposure coefficient shall be at least 1.",{'ID': '61_Finnish_StabilityOfStructures'},"For large roofs, where the <e1>smaller</e1> horizontal dimension of the roof is <e2>50 m</e2> or more, and the topography is windswept, the value of the exposure coefficient shall be at least 1.",none,annotated
+82bb35f1-0a27-4c94-bad3-246e6cc4f02a,"Wheelchair users should be able to manoeuvre around and use the facilities in the room, and operate switches and controls.",{'ID': '145_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Wheelchair users</e1> should be able to manoeuvre around and use the facilities in the room, and <e2>operate switches and controls</e2>.",necessity,annotated
+20216261-f56d-4f79-8a46-c781abe19f04,"For new and existing buildings other than dwellings, information should be provided in a new or existing building log book.",{'ID': '98_UK_DocF_V2_Ventilation'},"For <e1>new</e1> and existing <e2>buildings</e2> other than dwellings, information should be provided in a new or existing building log book.",selection,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",{'ID': '83_Finnish_SafetyOfUse'},"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the <e1>sum</e1> of these must be at least <e2>1,500 millimetres</e2>.",greater-equal,annotated
+7e34700e-92de-4b00-a820-f4085a2e186c_0,,,"If the free gap between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than 2 metres, the wall in question must be <e1>layers</e1> <e2>190 kN</e2>.",equal,synthetic
+9952f64d-e0df-4b03-84af-150782f81387_5,,,"For mobility-impaired people, a <e1>heat</e1> of at least <e2>E</e2> is preferred.",greater-equal,synthetic
+07565483-7508-43fc-b15e-82d95881e81e,"The average dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate should be calculated using the same averaging methodology.",{'ID': '70_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The average <e1>dwelling primary energy rate</e1>, dwelling emission rate and dwelling fabric energy efficiency rate should be <e2>calculated using the same averaging methodology</e2>.",necessity,annotated
+40b40b1b-d1b1-49d8-b9b7-13c5845a169d_4,,,The structure of the control appliance of the plumbing fixture shall be such that its <e1>cold side</e1> does not arise above <e2>20C</e2>.,less-equal,synthetic
+2a2dbb92-88af-47f5-bd1e-b3ddea4c1ec9,"The approach route should be safe and convenient for everyone, be at the shallowest gradient that can reasonably be achieved, and be stepfree, irrespective of the storey on which the dwelling is located.",{'ID': '70_UK_DocM_V1_AccessAndUseOfBuildings'},"The <e1>approach route</e1> should be <e2>safe and convenient for everyone</e2>, be at the shallowest gradient that can reasonably be achieved, and be stepfree, irrespective of the storey on which the dwelling is located.",necessity,annotated
+588857f5-9281-4c32-8d83-c98230d5b934,The use of boards with lapped or tongue and groove edges should be considered.,{'ID': '146_UK_DocL_V1_ConsrvationOfFuelAndPower'},The use of boards with <e1>lapped</e1> or tongue and groove <e2>edges</e2> should be considered.,selection,annotated
+302c413e-fefd-47f1-914f-0dc787e4a761_10,,,"Where <e1>energy performance</e1> on surfaces is greater than <e2>25 decibels</e2>, a difference in light reflectance value should be a minimum of 20 points.",greater,synthetic
+a43037b0-8e35-45a2-9f23-c2d65f6c5a64,"Where access to the dwelling can be gained via an interconnecting doorset from the garage, then either the garage doorset (pedestrian and vehicular) or the interconnecting doorset should be a secure doorset.",{'ID': '8_UK_DocQ_Security_Dwellings'},"Where <e1>access</e1> to the dwelling can be gained via an interconnecting doorset from the garage, then either the <e2>garage doorset</e2> (pedestrian and vehicular) or the interconnecting doorset should be a secure doorset.",none,annotated
+5ca6b3d3-fd21-4cc1-8dd8-185268db6615,The doorset should be manufactured from solid or laminated timber with a minimum density of 600kg/m3.,{'ID': '26_UK_DocQ_Security_Dwellings'},The <e1>doorset</e1> should be manufactured from solid or laminated <e2>timber</e2> with a minimum density of 600kg/m3.,necessity,annotated
+4d80c4d1-08ee-481a-9f9c-e9151ce1094d_11,,,"The <e1>capacity</e1> of windows, roof windows, rooflights and doors should not exceed <e2>proportion</e2> of the total floor area of the dwelling.",less-equal,synthetic
+eccd4f77-ef4a-41fd-a22a-620c84fdddd4,There is a minimum of 400mm of worktop to at least one side of the oven and fridge or fridge freezer where this is taller than the worktop height (or to one side of a pair of tall appliances where they are located together at the end of a run).,{'ID': '98_UK_DocM_V1_AccessAndUseOfBuildings'},There is a minimum of 400mm of worktop to at least one side of the oven and fridge or fridge freezer where this is taller than the worktop height (or to one side of a pair of <e1>tall</e1> <e2>appliances</e2> where they are located together at the end of a run).,selection,annotated
+fa90c179-d32c-412b-a7d6-a515cc91dbdb,The structure of the exterior wall against the ground must be waterproofed or isolated against water pressure or a structurally managed water removal system allowing the cellar wall to dry in an outward direction must be used to prevent moisture from the surrounding ground and storm water from penetrating the wall structure.,{'ID': '86_Finnish_Health-Humidity'},The structure of the exterior wall against the ground must be <e1>waterproofed</e1> or isolated against water pressure or a structurally managed <e2>water removal system</e2> allowing the cellar wall to dry in an outward direction must be used to prevent moisture from the surrounding ground and storm water from penetrating the wall structure.,none,annotated
+01bd7c41-594c-4440-8058-c34f1c4bad09,"When determining the free area available for ventilation during sleeping hours, only the proportion of openings that can be opened securely should be considered to provide useful ventilation.",{'ID': '82_UK_DocO_Overheating'},"When determining the free area available for ventilation during sleeping hours, only the <e1>proportion</e1> of <e2>openings</e2> that can be opened securely should be considered to provide useful ventilation.",part-of,annotated
+b8365796-12c1-47c1-9682-ff6131a75f21,"The various enduse categories, such as heating, lighting and cooling, should be submetered in such a way that at least 90 of the annual energy consumption of each fuel can be assigned to an enduse.",{'ID': '227_UK_DocM_V2_AccessAndUseOfBuildings'},"The various enduse categories, such as heating, lighting and cooling, should be <e1>submetered</e1> in such a way that <e2>at least 90 of the annual energy consumption of each fuel can be assigned to an enduse</e2>.",selection,annotated
+e1f1aeb9-7453-4b6b-b3f1-6049d711868a,The fire performance of the external wall structure of a building no more than 56 metres in height may also be demonstrated by a fullscale test.,{'ID': '156_Finnish_FireSafety'},The fire performance of the <e1>external</e1> wall structure of a building no more than 56 metres in height may also be <e2>demonstrated by a fullscale test</e2>.,none,annotated
+e505b13c-7b62-4857-aa2d-544dc986e9c0_7,,,"For dwellings, for external tapered steps and stairs that are part of the building the <e1>fire performance</e1> of each step should be a minimum of <e2>half</e2>.",greater-equal,synthetic
+10b37d1a-a0b5-4dfb-8bcc-39317d144580,"On variable volume systems, variable speed glandless circulators should be used.",{'ID': '289_UK_DocM_V2_AccessAndUseOfBuildings'},"On variable volume systems, variable <e1>speed glandless circulators</e1> should be <e2>used</e2>.",necessity,annotated
+517253f8-98b1-4821-8901-75124d3237db,"Consideration should be given to the provision of a second handrail on stairs in a wide range of building types, and particularly in schools, for use by children and people of short stature.",{'ID': '59_UK_DocM_V2_AccessAndUseOfBuildings'},"Consideration should be given to the provision of a second <e1>handrail</e1> on <e2>stairs</e2> in a wide range of building types, and particularly in schools, for use by children and people of short stature.",part-of,annotated
+b5d2186d-338d-40b6-b3b4-7fadf3cfd4e0,"For district cooling schemes, the CO2 and primary energy content of the cooling energy supplied should be calculated.",{'ID': '286_UK_DocM_V2_AccessAndUseOfBuildings'},"For <e1>district cooling schemes</e1>, the CO2 and primary energy content of the <e2>cooling energy</e2> supplied should be calculated.",selection,annotated
+5163f2fb-022f-4589-889f-2ade7a9d49c6,The relevant parts of Part 2 and 3 should be signed by a person who is competent to design the residential building.,{'ID': '109_UK_DocO_Overheating'},The <e1>relevant</e1> parts of <e2>Part 2 and 3</e2> should be signed by a person who is competent to design the residential building.,none,annotated
+c2e0629d-350b-45b8-9e9e-d58be1780f12_4,,,"If the <e1>heating</e1> has no <e2>retaining rail</e2>, it should be treated as having one bedroom when calculating the ventilation required for the purposes of meeting the ventilation standards.",not-part-of,synthetic
+fb5d3054-4911-4049-ba09-1c3e80f9c07c_0,,,"The <e1>proportion of the cooling load relating to distribution pipework</e1> of steps in uncovered or unheated outdoor staircases must be no less than <e2>8 per cent (1:12.5)</e2>, and the riser may be no more than 130 millimetres.",greater-equal,synthetic
+103f99ad-884b-4bae-9f22-ccb1c5bc3d26_9,,,"In an open garage of no more than <e1>two </e1> <e2>crawl space</e2>, the maximum area may be used as the surface area of the storeys, even though the driveways between the various storeys are combined.",less-equal,synthetic
+2633c957-07b4-4caa-a9d6-5acbac16b0b0_8,,,NOTE: Linear interpolation should be used to determine efficiencies between manufacturers declared efficiencies at 30 and <e1>200 m2</e1> <e2>either side</e2>.,equal,synthetic
+7d877df3-9aa7-4dff-a64d-5356a66c944d,"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a width exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",{'ID': '59_Finnish_SafetyOfUse'},"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a <e1>width</e1> exceeding <e2>2.4 metres</e2> and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",greater,annotated
+596cc55c-f50f-4155-962f-832b87226a8e,"For mechanical ventilation systems, fan units should be appropriately sized so that fans operating in normal background ventilation mode are not overly noisy.",{'ID': '23_UK_DocF_V1_Ventilation'},"For <e1>mechanical</e1> ventilation systems, fan units should be appropriately sized so that fans operating in normal background ventilation mode are <e2>not overly noisy</e2>.",none,annotated
+12e545d1-64f4-45c9-a520-5b8a003eba0a,"If the dwelling has more than one exposed facade, the area of background ventilators on each facade should be similar, to allow cross-ventilation.",{'ID': '85_UK_DocF_V1_Ventilation'},"If the dwelling has more than one exposed facade, the area of <e1>background ventilators</e1> on each facade should be <e2>similar, to allow cross-ventilation</e2>.",none,annotated
+9952f64d-e0df-4b03-84af-150782f81387_0,,,"For mobility-impaired people, a <e1>circulation  piping</e1> of at least <e2>2.0 m3/(h m2)</e2> is preferred.",greater-equal,synthetic
+20609d43-016e-4314-9620-256f73f1c6ed,"The general ventilation rate for a new conservatory and, if necessary, adjoining rooms could be achieved using background ventilators.",{'ID': '160_UK_DocF_V1_Ventilation'},"The general <e1>ventilation rate</e1> for a new <e2>conservatory</e2> and, if necessary, adjoining rooms could be achieved using background ventilators.",part-of,annotated
+75c60084-6878-472d-8694-e8739e0dd76c_4,,,The <e1>directions</e1> of access routes in assembly areas with a maximum capacity of 60 persons must be at least <e2>2.5 ties/m2</e2>.,greater-equal,synthetic
+81314489-dcd9-410f-9b15-595b87e7c8f9_4,,,"The resilient layer should be timber sheathing at least <e1>0.07</e1> <e2>primary energy content</e2>, expanded metal or a similar resilient material.",greater-equal,synthetic
+ad792658-a7d2-4d6e-9a21-c531bb02b521,To reduce the risks to the health of persons in buildings formaldehyde fumes given off by urea formaldehyde foams should not penetrate to the occupied parts of buildings to an extent which would give rise to an irritant concentration.,{'ID': '12_UK_DocD_ToxicSubstances'},To reduce the risks to the health of persons in buildings <e1>formaldehyde fumes</e1> <e2>given off by urea formaldehyde foams</e2> should not penetrate to the occupied parts of buildings to an extent which would give rise to an irritant concentration.,selection,annotated
+ad30824c-74be-4f4f-916a-dfe1e0a89205,"It should be noted that double buggies are wider than wheelchairs and that, where relevant to the building type, this should be borne in mind when determining an appropriate effective clear width for an entrance door.",{'ID': '67_UK_DocM_V2_AccessAndUseOfBuildings'},"It should be noted that double buggies are wider than wheelchairs and that, where relevant to the building type, this should be borne in mind when determining an appropriate <e1>effective</e1> <e2>clear width</e2> for an entrance door.",selection,annotated
+ee0c8c7c-c65e-4403-92e6-628fd680f3bf_3,,,Any panel within the doorset should be at least <e1>3</e1> <e2>centre pane U-value</e2>.,greater-equal,synthetic
+2be01bf1-2cd9-4982-8778-ba0afe835580,"If fans and background ventilators are fitted in the same room, they should be at least 500mm apart.",{'ID': '88_UK_DocF_V1_Ventilation'},"If fans and <e1>background ventilators</e1> are fitted in the same <e2>room</e2>, they should be at least 500mm apart.",part-of,annotated
+596cc55c-f50f-4155-962f-832b87226a8e,"For mechanical ventilation systems, fan units should be appropriately sized so that fans operating in normal background ventilation mode are not overly noisy.",{'ID': '23_UK_DocF_V1_Ventilation'},"For mechanical <e1>ventilation systems</e1>, <e2>fan units</e2> should be appropriately sized so that fans operating in normal background ventilation mode are not overly noisy.",part-of,annotated
+e15250c0-1279-4d29-a1ec-31560b045007_11,,,<e1>lighting</e1> of basement storeys must not be connected to fire and smoke-proof <e2>wall covering</e2>.,not-part-of,synthetic
+e43c1e88-be80-42d9-944e-1bf0f0f82479_1,,,"Individual flights are: for gradients up to 1:15 not more than 10m long; for gradients up to 1:12 not more than <e1>three</e1> <e2>combined dead,imposed and wind loads</e2>.",less-equal,synthetic
+d0927095-9e43-4ce4-a740-d5df69dc1dc3,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",{'ID': '84_Finnish_Health-IndoorClimateAndVentilation'},"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined <e1>air flow</e1>, the <e2>combined</e2> air flow is classified under category 2.",none,annotated
+3f31e50a-cdcc-412c-a363-2bfdfb507770,"For an electrically operated appliance, an integral remote or thermostatic control should be provided.",{'ID': '277_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For an <e1>electrically operated appliance</e1>, an integral remote or t<e2>hermostatic control</e2> should be provided.",necessity,annotated
+bde1697a-20c9-4f15-a63c-5be323a058c1,Any connection of two or more air handling units to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,{'ID': '90_Finnish_Health-IndoorClimateAndVentilation'},Any connection of two or more air handling units to the same duct or chamber shall be designed so that the pressures of the rooms or the <e1>directions</e1> of air flow <e2>between the rooms and in the ductworks</e2> do not change when the air flows of the units are being controlled.,none,annotated
+3724fd47-22f7-432c-81a2-1abcb95c7df2_9,,,"The <e1>floor area</e1> installed in a dwellings habitable rooms and kitchens should be no fewer than <e2>between 550mm and 700mm</e2>, except in one bedroom properties, where there should be no fewer than four.",greater-equal,synthetic
+a387fcb8-ead2-4094-9be9-72d783468b33,"If the area of windows, roof windows, rooflights and doors exceeds 25 of the total floor area of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",{'ID': '422_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If the <e1>area</e1> of windows, <e2>roof windows</e2>, rooflights and doors exceeds 25 of the total floor area of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",part-of,annotated
+56b0e4bf-81d7-4ab9-855b-780ef2f0b1d3_7,,,"Storage premises with a <e1>gradients</e1> exceeding <e2>1,500  millimetres</e2> are not permitted within the building.",greater,synthetic
+8cef7dc5-2d76-4dd8-80c5-6861b11a8f6f,"Where the work concerns a building containing more than one dwelling, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",{'ID': '3_UK_DocR_V1_InfrastructureForElectircalCommunications'},"Where the work concerns a building containing more than one dwelling, the <e1>work</e1> must be <e2>carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks</e2>.",necessity,annotated
+c2e0629d-350b-45b8-9e9e-d58be1780f12,"If the basement has no bedrooms, it should be treated as having one bedroom when calculating the ventilation required for the purposes of meeting the ventilation standards.",{'ID': '73_UK_DocF_V1_Ventilation'},"If the basement has no bedrooms, it should be treated as having one bedroom when calculating the <e1>ventilation</e1> <e2>required for the purposes of meeting the ventilation standards</e2>.",selection,annotated
+2de867fe-80e7-4617-ad18-36225dd45ab1_5,,,Hinged or pivot windows with an <e1>Geo-location</e1> of less than <e2>4</e2> are not suitable for purge ventilation.,less,synthetic
+5ba5ffe7-ece8-488a-b461-da66237e7888,"All walls, ducts and boxings to the WC/cloakroom, bathroom and shower room should be strong enough to support grab rails, seats and other adaptations that could impose a load of up to 1.5kN/m2.",{'ID': '54_UK_DocM_V1_AccessAndUseOfBuildings'},"All walls, ducts and boxings to the <e1>WC/cloakroom</e1>, bathroom and shower room should be <e2>strong enough to support grab rails, seats and other adaptations that could impose a load of up to 1.5kN/m2</e2>.",none,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479_5,,,Individual flights are: for gradients up to 1:15 not more than <e1>5m</e1> <e2>energy efficiency</e2>; for gradients up to 1:12 not more than 5m long.,less-equal,synthetic
+54907849-c48f-4267-b5f0-fc7e9279da7c,"For existing dwellings, when carrying out work on an existing system, such as installing or replacing components (e.g. replacing a boiler but retaining the pipework and heat emitters), the energy performance of the new components should be assessed.",{'ID': '409_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For existing <e1>dwellings</e1>, when <e2>carrying out work on an existing system, such as installing or replacing components</e2> (e.g. replacing a boiler but retaining the pipework and heat emitters), the energy performance of the new components should be assessed.",selection,annotated
+63af9f99-6939-4e8c-a6a9-8b10942e1597_9,,,"The handle to at least <e1>three seconds</e1> <e2>timber sheathing</e2> in the principal living area is located between 450mm and 1200mm above floor level, unless the window is fitted with a remote opening device that is within this height range.",greater-equal,synthetic
+6dd4c02d-ab0f-414d-b784-654bd72f9cd7,Monitors should therefore be positioned at least 500mm away from room occupants.,{'ID': '123_UK_DocF_V2_Ventilation'},<e1>Monitors</e1> should therefore be <e2>positioned at least 500mm away from room occupants</e2>.,necessity,annotated
+a9c88566-e4e5-4cba-8165-9916820d9cc5,"Doors, gates and boom barriers must operate safely and in such a way that they do not cause a danger of an accident.",{'ID': '75_Finnish_SafetyOfUse'},"Doors, gates and <e1>boom barriers</e1> must <e2>operate safely</e2> and in such a way that they do not cause a danger of an accident.",necessity,annotated
+d925c189-860a-4fcb-ae88-d1cf8cc14fb8_4,,,"The tread of steps in covered or heated outdoor staircases must be no less than 300 millimetres, and the <e1>heat</e1> may be no more than <e2>2</e2>.",less-equal,synthetic
+082c7ed9-3579-48c2-a0d2-076f1edd647c,"Each of the two sections of the centrally hinged window should be assessed as a single side, bottom or top hung window.",{'ID': '112_UK_DocO_Overheating'},"Each of the two sections of the <e1>centrally hinged</e1> <e2>window</e2> should be assessed as a single side, bottom or top hung window.",selection,annotated
+23db27ac-b594-4b26-883d-922d713d382a,"When installing or renovating thermal elements, the element being installed should be draught-proofed and airleakage gaps should be filled.",{'ID': '161_UK_DocM_V2_AccessAndUseOfBuildings'},"When <e1>installing</e1> or renovating thermal elements, the element being installed should be <e2>draught-proofed</e2> and airleakage gaps should be filled.",none,annotated
+2f0f22aa-06d3-478d-a777-5aca5c2fb5c1,"For sliding doors and gates, provide both of the following: (i) a stop or other effective means to prevent them coming off the end of the track; (ii) a retaining rail to prevent doors and gates falling if the suspension system fails or the rollers leave the track.",{'ID': '120_UK_DocK_ProtectionFromFalling'},"For sliding <e1>doors</e1> and gates, provide both of the following: (i) a <e2>stop</e2> or other effective means to prevent them coming off the end of the track; (ii) a retaining rail to prevent doors and gates falling if the suspension system fails or the rollers leave the track.",necessity,annotated
+f06f7ec1-3b83-4e1a-a421-b09589f2374c,"Provision shall be made to prevent any door or gate: (a) which slides or opens upwards, from falling onto any person; and (b) which is powered, from trapping any person.",{'ID': '114_UK_DocK_ProtectionFromFalling'},"Provision shall be made to prevent <e1>any</e1> <e2>door or gate</e2>: (a) which slides or opens upwards, from falling onto any person; and (b) which is powered, from trapping any person.",selection,annotated
+7e34700e-92de-4b00-a820-f4085a2e186c,"If the free gap between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than 2 metres, the wall in question must be class EI 15.",{'ID': '135_Finnish_FireSafety'},"If the <e1>free gap</e1> between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than <e2>2 metres</e2>, the wall in question must be class EI 15.",less,annotated
+a387fcb8-ead2-4094-9be9-72d783468b33,"If the area of windows, roof windows, rooflights and doors exceeds 25 of the total floor area of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",{'ID': '422_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If the area of windows, roof windows, rooflights and doors exceeds 25 of the total floor area of the dwelling, <e1>compensating measures</e1> should be <e2>taken to improve the energy efficiency of the dwelling</e2>.",necessity,annotated
+5afbc8c9-4c2e-4cb8-8945-24e184d161e1,The fan should be set at a speed that will approximately achieve the desired continuous flow rate.,{'ID': '201_UK_DocF_V1_Ventilation'},The <e1>fan</e1> should be set at a speed that will <e2>approximately achieve the desired continuous flow rate</e2>.,none,annotated
+6075de3c-d339-4ba4-9945-990480975615_2,,,"Where a kitchen and living room accommodation are not separate rooms (i.e. open plan), no fewer than <e1>25</e1> <e2>water heater</e2> of the same equivalent area as for other habitable rooms should be provided within the open-plan space.",greater-equal,synthetic
+fab95d95-4789-4384-8d57-a575190f9e73,The heating plant emission rate of the micro combined heat and power system (microCHP) should be no greater than the emission rate of a regular boiler using the same fuel as the microCHP.,{'ID': '297_UK_DocL_V1_ConsrvationOfFuelAndPower'},The heating plant emission rate of the micro combined heat and power system (microCHP) should be no greater than the emission rate of a regular <e1>boiler</e1> <e2>using the same fuel as the microCHP</e2>.,selection,annotated
+710ef992-e187-4b1a-894b-e0e222f54359_9,,,"NOTE: For grid-supplied electricity, a <e1>span</e1> of <e2>850-1000mm</e2> and primary energy factor of 1.501kWhPE/kWh should be used.",equal,synthetic
+1913381b-a2cc-496e-9168-82ccf2a01d50,"In connection with repair and alteration work, the heat emitters connected to the domestic hot water ring duct may be replaced so that the heat emission capacity of the heat emitters to be installed does not exceed 200 Watts per room.",{'ID': '67_Finnish_Health-WaterAndSewerage'},"In connection with repair and alteration work, the heat emitters connected to the domestic hot water ring duct may be replaced so that the heat emission capacity of the <e1>heat emitters</e1> <e2>to be installed</e2> does not exceed 200 Watts per room.",selection,annotated
+e8340500-38b6-461b-b00d-d3aa44ac1f0b_11,,,The <e1>area</e1> of the water available from the hot water system may not exceed <e2>B</e2>.,less-equal,synthetic
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c_8,,,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding <e1>3</e1> <e2>auxiliary units</e2> is EI 30; however, minor sealing parts and penetrations may be class E 15.",greater,synthetic
+2cc3d5b0-d3b4-45f2-a00d-838fd3f9abbb,"There should be a supply rate, in the absence of tobacco smoke or other excessive pollutants, of 10 litres per second per person.",{'ID': '114_UK_DocF_V2_Ventilation'},"There should be a <e1>supply rate</e1>, in the absence of tobacco smoke or other excessive pollutants, of <e2>10 litres per second per person</e2>.",equal,annotated
+40b40b1b-d1b1-49d8-b9b7-13c5845a169d_1,,,The structure of the control appliance of the plumbing fixture shall be such that its <e1>Geo-location</e1> does not arise above <e2>5m</e2>.,less-equal,synthetic
+86365504-9029-4805-a93b-4256849b8e3a,Duct connections should be both mechanically secured and adequately sealed to prevent leaks.,{'ID': '116_UK_DocF_V1_Ventilation'},<e1>Duct</e1> <e2>connections</e2> should be both mechanically secured and adequately sealed to prevent leaks.,part-of,annotated
+66b3628a-f0ee-4bc7-93c8-2ae0145a2e78_6,,,"In a <e1>firefighting and rescue operations</e1> with no openable <e2>exterior wall</e2>, an intermittent extract fan should be provided with controls which continue to operate the fan for at least 15 minutes after the room is vacated.",not-part-of,synthetic
+21bf2954-bfa8-44ef-bb2e-4e34367965ba,"If a load-bearing element is required to have a longer fire resistance time with respect to integrity E and insulation I than with respect to load-bearing capacity R, the longer fire resistance time shall also be applied to the load-bearing capacity.",{'ID': '88_Finnish_FireSafety'},"If a load-bearing element is <e1>required to have a longer fire resistance time with respect to integrity E and insulation I than with respect to load-bearing capacity R</e1>, the longer <e2>fire resistance time</e2> shall also be applied to the load-bearing capacity.",none,annotated
+4fc3b5b1-a838-4429-b385-d8e80e6633eb,"In the absence of relevant harmonised European Standards, products with a travel exceeding 3m must have a product certificate issued by a Notified Body.",{'ID': '117_UK_DocM_V2_AccessAndUseOfBuildings'},"In the absence of relevant harmonised European Standards, products with a travel exceeding 3m must have a <e1>product certificate</e1> <e2>issued by a Notified Body</e2>.",necessity,annotated
+4e119abd-0cf7-4c60-9c7b-1083f9b46280,"NOTE: If an exposed facade is close to an area of sustained and loud noise (e.g. a main road), then a noise attenuating background ventilator should be fitted.",{'ID': '85_UK_DocF_V2_Ventilation'},"NOTE: If an exposed facade is close to an area of sustained and loud noise (e.g. a main road), then a <e1>noise attenuating</e1> <e2>background ventilator</e2> should be fitted.",selection,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479,Individual flights are: for gradients up to 1:15 not more than 10m long; for gradients up to 1:12 not more than 5m long.,{'ID': '18_UK_DocM_V1_AccessAndUseOfBuildings'},Individual <e1>flights</e1> are: for gradients up to 1:15 not more than 10m long; for <e2>gradients</e2> up to 1:12 not more than 5m long.,selection,annotated
+419892bb-5044-4c63-a8ba-7747ad52c23d,"When installing windows, roof windows, rooflights or doors (all of which are controlled fittings), the controlled fitting should be well fitted and reasonably draught-proof.",{'ID': '195_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When <e1>installing</e1> <e2>windows</e2>, roof windows, rooflights or doors (all of which are controlled fittings), the controlled fitting should be well fitted and reasonably draught-proof.",selection,annotated
+d7737a4f-9594-475c-891f-a27d66fb7067,Insulating materials which give off formaldehyde fumes (either when used or later in normal use) may be used to insulate the cavity in a cavity wall where there is a continuous barrier which will minimise as far as practicable the passage of fumes to the occupiable parts.,{'ID': '14_UK_DocD_ToxicSubstances'},<e1>Insulating materials</e1> which <e2>give off formaldehyde fumes (either when used or later in normal use)</e2> may be used to insulate the cavity in a cavity wall where there is a continuous barrier which will minimise as far as practicable the passage of fumes to the occupiable parts.,selection,annotated
+a0c838b5-5fe2-4b52-abe1-432804c2c8aa_11,,,A <e1>tread</e1> of 21 C shall be used as the <e2>primary energy factor</e2> for room temperature during the heating season.,equal,synthetic
+8cfa23d5-d9d3-4d72-a761-6595f876d577,NOTE: Ventilation through infiltration should be considered to be part of the ventilation provision of a building.,{'ID': '79_UK_DocF_V2_Ventilation'},NOTE: <e1>Ventilation</e1> through infiltration should be <e2>considered to be part of the ventilation provision of a building</e2>.,necessity,annotated
+db734798-9e42-4fe1-900c-77d4e6131809,"The main doors for entering a dwelling (usually the front door) should have a door viewer unless other means exist to see callers, such as clear glass within the door or a window next to the doorset.",{'ID': '11_UK_DocQ_Security_Dwellings'},"The main doors for entering a dwelling (usually the front door) should have a door viewer unless other means exist to see callers, such as <e1>clear</e1> <e2>glass</e2> within the door or a window next to the doorset.",selection,annotated
+eccd4f77-ef4a-41fd-a22a-620c84fdddd4,There is a minimum of 400mm of worktop to at least one side of the oven and fridge or fridge freezer where this is taller than the worktop height (or to one side of a pair of tall appliances where they are located together at the end of a run).,{'ID': '98_UK_DocM_V1_AccessAndUseOfBuildings'},There is a minimum of 400mm of worktop to at least <e1>one side</e1> of the oven and fridge or <e2>fridge freezer</e2> where this is taller than the worktop height (or to one side of a pair of tall appliances where they are located together at the end of a run).,part-of,annotated
+1d18f0c9-31e5-43ee-8f16-e4fa607c5cd9,"The same approved calculation tool must be used to calculate the target primary energy rate, the target emission rate, the building primary energy rate and the building emission rate.",{'ID': '51_UK_DocM_V2_AccessAndUseOfBuildings'},"The same approved <e1>calculation tool</e1> must be <e2>used to calculate</e2> the target primary energy rate, the target emission rate, the building primary energy rate and the building emission rate.",necessity,annotated
+fb5d3054-4911-4049-ba09-1c3e80f9c07c,"The tread of steps in uncovered or unheated outdoor staircases must be no less than 390 millimetres, and the riser may be no more than 130 millimetres.",{'ID': '29_Finnish_SafetyOfUse'},"The <e1>tread</e1> of steps in uncovered or unheated <e2>outdoor</e2> staircases must be no less than 390 millimetres, and the riser may be no more than 130 millimetres.",none,annotated
+c954c2a4-3d5c-4e63-8228-9704b463aa8e,"The input charge for electric storage heaters should be adjusted automatically, based on the internal air temperature.",{'ID': '260_UK_DocM_V2_AccessAndUseOfBuildings'},"The <e1>input charge</e1> for electric storage heaters should be <e2>adjusted automatically, based on the internal air temperature</e2>.",necessity,annotated
+45adb0b6-63ee-4f42-b6a3-8fc396221c67_7,,,The <e1>level differences</e1> of the insulation plus any required air gap should be at least to the <e2>proportion of the cooling load relating to distribution pipework</e2> of the rafters.,greater-equal,synthetic
+0da52584-1b37-48b5-840f-3795ae695275_2,,,the minimum clear dimensions of the platform are: 1100mm wide and <e1>8 per cent (1:12.5)</e1> <e2>air extract rate</e2> where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+a1f91cfd-21f8-49a4-8468-746f49f4848e_2,,,"For a building that contains more than <e1>600 x 600 millimetres</e1> <e2>compressible tape</e2> for example a block of flats or a terrace of houses an average target primary energy rate, target emission rate and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",greater,synthetic
+993e54cc-49c3-43cb-995e-1a951c93c775_4,,,"When a warning sign is not posted, the areas shall be designed to an axle load Qk and also to an <e1>either side</e1> equal to <e2>1 in 40</e2>.",equal,synthetic
+09b2a395-5293-4b7d-82d4-5312482d59e9_9,,,"Door entry controls, where provided, are mounted 900-1000mm above finished ground level, and at least <e1>01:08:00</e1> <e2>topography</e2> from any projecting corner.",greater-equal,synthetic
+36650de0-ef3c-4fd1-8199-f47c0e576076_2,,,the <e1>breaking</e1> of the platform does not exceed <e2>20 points</e2>.,less-equal,synthetic
+0f8b3f66-6496-431c-bdc1-75570dde9ee6,"All cable routes should be laid as straight as possible and with suitable access points, so that cables can be pulled through in future.",{'ID': '111_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"All <e1>cable routes</e1> should be laid as straight as possible and with suitable <e2>access points</e2>, so that cables can be pulled through in future.",necessity,annotated
+05864826-21ef-4ae7-9af8-2aaeffc7267a,Modular and portable buildings with a planned service life of more than two years but with an intended time of use in a single location of less than two years should be shown to comply with the energy efficiency requirements.,{'ID': '83_UK_DocM_V2_AccessAndUseOfBuildings'},Modular and portable buildings with a planned <e1>service life</e1> of more than <e2>two years</e2> but with an intended time of use in a single location of less than two years should be shown to comply with the energy efficiency requirements.,greater,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_5,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for <e1>clear width</e1> <e2>600kg/m3</e2> and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",equal,synthetic
+c06bb553-d8f1-47f5-ab33-cfdebb6bca52,"When a building undergoes a major renovation, the technical, environmental and economic feasibility of installing high-efficiency alternative systems should be considered.",{'ID': '117_UK_DocM_V2_AccessAndUseOfBuildings'},"When a <e1>building</e1> undergoes a major renovation, the technical, environmental and <e2>economic</e2> feasibility of installing high-efficiency alternative systems should be considered.",none,annotated
+2f815a08-db3c-48a6-b248-d69aeac870ee,"the vertical travel distance is: a. not more than 2m, where there is no liftway enclosure and no floor penetration; b. more than 2m, where there is a liftway enclosure.",{'ID': '173_UK_DocM_V2_AccessAndUseOfBuildings'},"the vertical travel distance is: a. not more than <e1>2m</e1>, where there is no liftway enclosure and no floor penetration; b. more than 2m, <e2>where there is a liftway enclosure</e2>.",none,annotated
+5305da48-b810-4fd8-a0b3-7520f89ff401,"When installing or renovating thermal elements, the element being installed should be draught-proofed, and air-leakage gaps should be filled.",{'ID': '194_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When <e1>installing</e1> or renovating <e2>thermal elements</e2>, the element being installed should be draught-proofed, and air-leakage gaps should be filled.",selection,annotated
+fc8ee55c-408d-48a9-ae4c-a6961b5745ce,Biomass heating supplemented by an alternative appliance (e.g. gas) - the CO2 emission factor and primary energy factor should be based on a weighted average for the two fuels.,{'ID': '59_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Biomass heating</e1> supplemented by an alternative appliance (e.g. gas) - the CO2 emission factor and <e2>primary energy factor</e2> should be based on a weighted average for the two fuels.,part-of,annotated
+d342429e-d3fc-46e0-a195-527cfef1fd4b_1,,,"When an existing building with a total useful <e1>high</e1> of over <e2>220 millimetres</e2> is being extended or the habitable area is being increased, consequential improvements should be installed.",greater,synthetic
+db734798-9e42-4fe1-900c-77d4e6131809,"The main doors for entering a dwelling (usually the front door) should have a door viewer unless other means exist to see callers, such as clear glass within the door or a window next to the doorset.",{'ID': '11_UK_DocQ_Security_Dwellings'},"The main doors <e1>for entering a dwelling</e1> (usually the <e2>front door</e2>) should have a door viewer unless other means exist to see callers, such as clear glass within the door or a window next to the doorset.",none,annotated
+baee716c-b8c2-4500-b4de-63fa11f007b1_6,,,A minimum of one in <e1>10</e1> of the remaining <e2>Consideration</e2> must have access to cable routes.,equal,synthetic
+bde1697a-20c9-4f15-a63c-5be323a058c1,Any connection of two or more air handling units to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,{'ID': '90_Finnish_Health-IndoorClimateAndVentilation'},Any connection of two or more <e1>air handling units</e1> to the same duct or <e2>chamber</e2> shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,part-of,annotated
+6414854d-01f9-481f-a7f4-c4581e48d8b1,Special safety features are not necessary if the ladder is not more than 6m long.,{'ID': '112_UK_DocK_ProtectionFromFalling'},Special safety features are not necessary if the <e1>ladder</e1> is not more than 6m <e2>long</e2>.,part-of,annotated
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",{'ID': '75_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for <e1>electric vehicle charge points</e1> must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds <e2>7%</e2> of the total cost of the major renovation.",none,annotated
+b5d2186d-338d-40b6-b3b4-7fadf3cfd4e0,"For district cooling schemes, the CO2 and primary energy content of the cooling energy supplied should be calculated.",{'ID': '286_UK_DocM_V2_AccessAndUseOfBuildings'},"For district cooling schemes, the <e1>CO2</e1> and primary energy content of the cooling energy supplied should be <e2>calculated</e2>.",necessity,annotated
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3,"Where the cost of installing only cable routes is more than 7% of the total cost of the major renovation, there is no requirement to install either electric vehicle charge points or cable routes.",{'ID': '53_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where the cost of installing only cable routes is more than 7% of the total cost of the major renovation, there is no <e1>requirement</e1> <e2>to install either electric vehicle charge points or cable routes</e2>.",selection,annotated
+ee0c8c7c-c65e-4403-92e6-628fd680f3bf_0,,,Any panel within the doorset should be at least <e1>1m3/s</e1> <e2>heat loss</e2>.,greater-equal,synthetic
+3e9fc57e-bc69-4f17-a056-dd7767afa9bb,"If the height of the building does not exceed 28 metres, access to the attic fire compartments from the outside shall be required.",{'ID': '241_Finnish_FireSafety'},"If the height of the building does not exceed 28 metres, <e1>access</e1> to the attic <e2>fire compartments</e2> from the outside shall be required.",necessity,annotated
+7f696221-52c9-4c52-8f90-74bd93c51299,This grippable handrail is 850-1000mm above the pitch line of the flight and extends at least 300mm beyond the top and bottom nosings.,{'ID': '73_UK_DocM_V1_AccessAndUseOfBuildings'},This <e1>grippable handrail</e1> is 850-1000mm above the pitch line of the flight and <e2>extends</e2> at least 300mm beyond the top and bottom nosings.,part-of,annotated
+8207751f-13b8-4fe3-9bfe-4423093d4905_10,,,A building with dwellings or accommodation or patient rooms shall be designed and implemented so that the <e1>from the inside face of the wall</e1> of the staircase and exit route is no more than <e2>16/01/2023 00:00</e2>.,less-equal,synthetic
+20518e80-6f7e-457f-8c5a-59fa4c0eb324_4,,,"When calculating the heat loss for a buildings design solution, the <e1>power input from controls</e1> shall be used as the value of the <e2>manufacturers declared efficiencies</e2> for the building envelope.",equal,synthetic
+b850a570-c0bd-4cf0-8b46-338ff5d8aa78,NOTE: A system for purge ventilation should be provided in each habitable room to demonstrate compliance with Part F of the Building Regulations.,{'ID': '67_UK_DocO_Overheating'},NOTE: A <e1>system for purge ventilation</e1> should be provided in each <e2>habitable room</e2> to demonstrate compliance with Part F of the Building Regulations.,necessity,annotated
+d3fc8c9b-c23a-4188-8723-369caa90453c_11,,,"The <e1>number of appliances</e1> for a building's total combined window area is <e2>0.052083333</e2> of the sum total of the floor plate areas of the buildings storeys that are fully or in part above the ground but, however, at most 50 of the building's facade area.",equal,synthetic
+7dbe5dbf-39fb-4ba4-bc75-d6ac7898e615,"U-values for rooflights or rooflight-and-kerb assemblies should be based on the developed surface area of the rooflight (U-values), which is often greater than the area of the roof opening.",{'ID': '114_UK_DocL_V1_ConsrvationOfFuelAndPower'},"<e1>U-values</e1> for <e2>rooflights</e2> or rooflight-and-kerb assemblies should be based on the developed surface area of the rooflight (U-values), which is often greater than the area of the roof opening.",part-of,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479,Individual flights are: for gradients up to 1:15 not more than 10m long; for gradients up to 1:12 not more than 5m long.,{'ID': '18_UK_DocM_V1_AccessAndUseOfBuildings'},Individual <e1>flights</e1> are: for gradients up to 1:15 not more than <e2>10m</e2> long; for gradients up to 1:12 not more than 5m long.,none,annotated
+a538fc03-db66-4b31-b40f-e41754522010,The three-part form should be completed for each installation address.,{'ID': '264_UK_DocF_V1_Ventilation'},The three-part <e1>form</e1> should be <e2>completed for each installation address</e2>.,necessity,annotated
+d9b8f957-49e3-45d0-83ca-c0419a50361a,"In a mechanical system, there shall be a clearly labelled stop switch, which shall be located in an easily accessible place.",{'ID': '48_Finnish_Health-IndoorClimateAndVentilation'},"In a <e1>mechanical</e1> <e2>system</e2>, there shall be a clearly labelled stop switch, which shall be located in an easily accessible place.",selection,annotated
+d342429e-d3fc-46e0-a195-527cfef1fd4b,"When an existing building with a total useful floor area of over 1000m2 is being extended or the habitable area is being increased, consequential improvements should be installed.",{'ID': '451_UK_DocM_V2_AccessAndUseOfBuildings'},"When an <e1>existing</e1> building with a total useful floor area of over 1000m2 is being extended or the habitable area is being increased, <e2>consequential improvements should be installed</e2>.",none,annotated
+825053cb-af5d-43a9-b59b-e2a5ae78ea73_6,,,The <e1>total minimum width</e1> of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the number of dwellings in the residential building; b. the <e2>depth</e2> of associated parking spaces.,greater,synthetic
+2af8ee5f-9d05-4023-9365-d093ebdfba1f,"Where building work is carried out in a kitchen or bathroom, any existing fans (including cooker hoods, where they extract to the outside) should be retained or replaced.",{'ID': '168_UK_DocF_V1_Ventilation'},"Where <e1>building work</e1> is carried out in a <e2>kitchen</e2> or bathroom, any existing fans (including cooker hoods, where they extract to the outside) should be retained or replaced.",part-of,annotated
+37f01a2c-b944-45a2-a7f4-140d8c03d7ac_1,,,"After rebating, frame components should retain at least <e1>1800mm</e1> of <e2>storey</e2>.",greater-equal,synthetic
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_3,,,"The wall ties should have a <e1>operation</e1> of <e2>600 millimetres</e2> and a vertical spacing of 450mm, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",equal,synthetic
+5577528f-8fa0-4ca3-96f6-ea418091cb86_0,,,The side edges of stairs and landings must be fitted with a raised camber to prevent slipping over the edge if a cube measuring more than <e1>20 litres per second</e1> in <e2>air flow resistance</e2> is able to pass through the opening between the plane level and the handrail or wall.,greater,synthetic
+c2e0629d-350b-45b8-9e9e-d58be1780f12_0,,,"If the <e1>Ventilation systems</e1> has no <e2>connector pipe</e2>, it should be treated as having one bedroom when calculating the ventilation required for the purposes of meeting the ventilation standards.",not-part-of,synthetic
+3121fe90-27db-405e-a42a-df3cd22ee176_1,,,"Where necessary, <e1>1 in 40</e1><e2>pipes</e2>, one above the other, must be installed in order to take into account children and users of wheelchairs.",equal,synthetic
+53e31e26-a39b-4047-a86e-bdb8021413e8_6,,,Window handles on windows that open outwards are not more than <e1>6mm</e1> <e2>flushing</e2> when the window is at its maximum openable angle.,less-equal,synthetic
+09b2a395-5293-4b7d-82d4-5312482d59e9_2,,,"Door entry controls, where provided, are mounted 900-1000mm above finished ground level, and at least <e1>(16.66 8.33 V0.4)/(1000 24)</e1> <e2>part</e2> from any projecting corner.",greater-equal,synthetic
+ef561e39-db90-462c-8dde-15fbeae954e5_11,,,A cube with <e1>construction</e1> of no more than <e2>100mm</e2> may pass between the upper edge of the barrier and the protective part.,less-equal,synthetic
+7d552257-2212-4139-8d13-b982e0e7744f,"It would be beneficial if entrance doors to wheelchair-accessible bedrooms were powered opening, as this could avoid the need for the 300mm access space adjacent to the leading edge of the door.",{'ID': '143_UK_DocM_V2_AccessAndUseOfBuildings'},"It would be beneficial if entrance doors to <e1>wheelchair-accessible</e1> bedrooms were <e2>powered opening</e2>, as this could avoid the need for the 300mm access space adjacent to the leading edge of the door.",none,annotated
+3c0a8ccb-d813-40fb-b69b-88250d3bc4ec,These fittings should not exceed a centre pane U-value of 1.2W/(m2K).,{'ID': '118_UK_DocL_V1_ConsrvationOfFuelAndPower'},These fittings should not exceed a <e1>centre pane U-value</e1> of <e2>1.2W/(m2K)</e2>.,less-equal,annotated
+05864826-21ef-4ae7-9af8-2aaeffc7267a,Modular and portable buildings with a planned service life of more than two years but with an intended time of use in a single location of less than two years should be shown to comply with the energy efficiency requirements.,{'ID': '83_UK_DocM_V2_AccessAndUseOfBuildings'},Modular and <e1>portable</e1> <e2>buildings</e2> with a planned service life of more than two years but with an intended time of use in a single location of less than two years should be shown to comply with the energy efficiency requirements.,selection,annotated
+e4fb8d18-8dbc-4351-a2df-d87f880f476a_1,,,The <e1>building emission rate</e1> for balconies is <e2>15</e2> that of the load-bearing structures of the storey.,equal,synthetic
+60024014-cb6a-4a53-9b12-9497e0a1e5e8,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",{'ID': '85_Finnish_Health-IndoorClimateAndVentilation'},"Extract air from <e1>toilets</e1>, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the total extract air flow from these <e2>spaces</e2> does not exceed 10 of the total air flow in the vertical duct.",none,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_10,,,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the <e1>travel</e1> of these must be at least <e2>half</e2>.",greater-equal,synthetic
+5e7d4831-4ec8-48f9-9e60-0422fcc1eae4,"When replacing an existing system, the installed generation capacity of the new system should be no less than that of the existing system, except where a smaller system can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",{'ID': '344_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When replacing an <e1>existing</e1> <e2>system</e2>, the installed generation capacity of the new system should be no less than that of the existing system, except where a smaller system can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",selection,annotated
+0fdce0b1-7992-401f-aa84-ad7f2acca23d,Cavity walls: the inner block leaf mortar joint should be fully filled and pointed within the cavity.,{'ID': '184_UK_DocL_V1_ConsrvationOfFuelAndPower'},Cavity walls: the inner block leaf <e1>mortar joint</e1> should be fully filled and <e2>pointed within the cavity</e2>.,necessity,annotated
+99a53f17-48cb-4012-a47b-700761e0983b,Where a new building which is not a residential building or a mixed-use building has more than 10 parking spaces (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,{'ID': '61_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},Where a new <e1>building</e1> which is not a residential building or a mixed-use building has more than 10 parking spaces (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) <e2>cable routes</e2> for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,none,annotated
+47e50ddf-6174-436d-851b-7ddf46c10ccf,A suitable chemical inhibitor should be added to the primary heating circuit to protect against scale and corrosion.,{'ID': '380_UK_DocL_V1_ConsrvationOfFuelAndPower'},A suitable chemical <e1>inhibitor</e1> should be added to the primary <e2>heating circuit</e2> to protect against scale and corrosion.,necessity,annotated
+d988e207-c3f9-4314-9a16-f99b334595f4_0,,,The <e1>access</e1> must be no less than <e2>600kg/m3</e2>.,greater-equal,synthetic
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_2,,,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the <e1>number of storeys</e1> of these must be at least <e2>(16.66 8.33 V0.4)/(1000 24)</e2>.",greater-equal,synthetic
+72d7716f-7e3e-442c-9e42-14d4b19e18e3_6,,,A <e1>appliance</e1> that is being connected to a new building should not have a <e2>U-values</e2> for delivered heat to the building which is greater than 0.350kgCO2/kWh.,not-part-of,synthetic
+8207751f-13b8-4fe3-9bfe-4423093d4905_0,,,A building with dwellings or accommodation or patient rooms shall be designed and implemented so that the <e1>sum total</e1> of the staircase and exit route is no more than <e2>160 millimetres</e2>.,less-equal,synthetic
+0f8b3f66-6496-431c-bdc1-75570dde9ee6,"All cable routes should be laid as straight as possible and with suitable access points, so that cables can be pulled through in future.",{'ID': '111_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"All cable routes should be <e1>laid as straight as possible</e1> and with suitable access points, so that <e2>cables</e2> can be pulled through in future.",selection,annotated
+993e54cc-49c3-43cb-995e-1a951c93c775_1,,,"When a warning sign is not posted, the areas shall be designed to an axle load Qk and also to an <e1>open outwards</e1> equal to <e2>three seconds</e2>.",equal,synthetic
+a0c838b5-5fe2-4b52-abe1-432804c2c8aa_9,,,A <e1>presence</e1> of 21 C shall be used as the <e2>CO2 emissions</e2> for room temperature during the heating season.,equal,synthetic
+457ecdc0-8247-4ad4-9beb-3b7a31cfa0fd,"All public areas, including lavatory accommodation, public telephones and external terraces should be accessible.",{'ID': '138_UK_DocM_V2_AccessAndUseOfBuildings'},"All <e1>public areas</e1>, including <e2>lavatory</e2> accommodation, public telephones and external terraces should be accessible.",none,annotated
+bde1697a-20c9-4f15-a63c-5be323a058c1_11,,,Any connection of <e1>0.7 metres</e1> or more <e2>handle</e2> to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,greater-equal,synthetic
+5925ca4d-801c-42e4-b581-a176dea2519f,"If thermal energy is supplied from a district heat network, a CO2 emission factor and primary energy factor for the heat delivered to the dwelling by the district heat network should be calculated.",{'ID': '76_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If thermal energy is supplied from a district heat network, a <e1>CO2 emission factor</e1> and primary energy factor for the <e2>heat</e2> delivered to the dwelling by the district heat network should be calculated.",part-of,annotated
+2cc3d5b0-d3b4-45f2-a00d-838fd3f9abbb_9,,,"There should be a <e1>data collection facilities</e1>, in the absence of tobacco smoke or other excessive pollutants, of <e2>0.15 dm3/s per m2</e2>.",equal,synthetic
+1834463c-7e45-4148-8315-f750b5f047cb,"When the lift serves more than three storeys, it provides visual and audible indicators to identify the floor reached.",{'ID': '25_UK_DocM_V1_AccessAndUseOfBuildings'},"When the lift serves more than three storeys, it provides <e1>visual and audible indicators</e1> <e2>to identify the floor reached</e2>.",selection,annotated
+01bd7c41-594c-4440-8058-c34f1c4bad09,"When determining the free area available for ventilation during sleeping hours, only the proportion of openings that can be opened securely should be considered to provide useful ventilation.",{'ID': '82_UK_DocO_Overheating'},"When determining the free area available for ventilation during sleeping hours, only the proportion of openings that can be <e1>opened securely</e1> should be <e2>considered to provide useful ventilation</e2>.",none,annotated
+eccd4f77-ef4a-41fd-a22a-620c84fdddd4,There is a minimum of 400mm of worktop to at least one side of the oven and fridge or fridge freezer where this is taller than the worktop height (or to one side of a pair of tall appliances where they are located together at the end of a run).,{'ID': '98_UK_DocM_V1_AccessAndUseOfBuildings'},There is a minimum of 400mm of worktop to at least one side of the oven and <e1>fridge</e1> or fridge freezer where this is <e2>taller than the worktop height</e2> (or to one side of a pair of tall appliances where they are located together at the end of a run).,selection,annotated
+26980508-105c-49db-8595-bf001a48d757_2,,,"In <e1>Door furniture</e1> with no fixed seats or <e2>energy declaration</e2>, the number of persons shall be calculated to be two persons per square metre.",not-part-of,synthetic
+3c0a8ccb-d813-40fb-b69b-88250d3bc4ec_4,,,These fittings should not exceed a <e1>specification</e1> of <e2>270 millimetres</e2>.,less-equal,synthetic
+cc72106e-9e7f-47cf-8a95-0173a8305dad,"In a new building, the crawl space height must be 0.8 metres on average at the minimum.",{'ID': '83_Finnish_Health-Humidity'},"In a new <e1>building</e1>, the <e2>crawl space</e2> height must be 0.8 metres on average at the minimum.",part-of,annotated
+511c1a7f-08b9-48ec-aea6-9b749fdf31a1_7,,,"A non-residential building shall, considering the intended use and functional units of the building and distances in the building, have an <e1>70 kN</e1> of appropriately located <e2>cavity</e2> which are suitable for users of wheelchairs and walking frames with wheels.",equal,synthetic
+77f993c6-dff1-4f9a-8f66-73221d3cbaff_7,,,"If the dwelling only has <e1>20 millimetres</e1> <e2>lifting device</e2>, a minimum ventilation rate of 13l/s should be used.",equal,synthetic
+2a256a9c-0b8a-4acf-87e1-86a5857f36a3_8,,,"Where a driveway forms all, or part of, the approach route, an <e1>located in an easily accessible place</e1> of at least <e2>1800mm</e2> wide should be provided so that a wheelchair user can pass a parked car.",greater-equal,synthetic
+77f993c6-dff1-4f9a-8f66-73221d3cbaff_4,,,"If the dwelling only has <e1>4</e1> <e2>hot water system</e2>, a minimum ventilation rate of 13l/s should be used.",equal,synthetic
+b88c2c2a-5c6f-4347-888d-0224c8971d7b,Non-condensing boilers should be fitted with a flue condensing kit where feasible and where the boiler is likely to be able to operate in condensing mode (e.g. variable temperature circuits).,{'ID': '235_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Non-condensing</e1> <e2>boilers</e2> should be fitted with a flue condensing kit where feasible and where the boiler is likely to be able to operate in condensing mode (e.g. variable temperature circuits).,selection,annotated
+fb1da22f-8ddb-4399-b441-64dca68da9af,"If a lift or other device for moving between levels is installed in the exit of an existing building, the dwellings exit may be no less than 850 millimetres wide.",{'ID': '218_Finnish_FireSafety'},"If a lift or other device for moving between levels is installed in the exit of an <e1>existing</e1> <e2>building</e2>, the dwellings exit may be no less than 850 millimetres wide.",selection,annotated
+ef4ec541-e1a7-47d4-9a83-94715d8900ba,"Where one or more parking spaces are within a covered car park, the requirement to install electric vehicle charge points should be met by installing charge points in parking spaces that are not within a covered car park.",{'ID': '89_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where one or more parking spaces are within a <e1>covered</e1> <e2>car park</e2>, the requirement to install electric vehicle charge points should be met by installing charge points in parking spaces that are not within a covered car park.",selection,annotated
+c0a6d35c-cc20-428b-941d-c3e3e6365c74,"In a tier that is uninterrupted by cross-gangways, and where the pitch exceeds 25, use a maximum number of steps of 40.",{'ID': '25_UK_DocK_ProtectionFromFalling'},"In a tier that is <e1>uninterrupted by cross-gangways</e1>, and where the <e2>pitch</e2> exceeds 25, use a maximum number of steps of 40.",none,annotated
+7f3f59a4-fc7e-4b14-8074-384f6cacf548_1,,,"The height of a barrier in a dwellings indoor areas may, however, be at least 0.9 metres if the <e1>ventilation rate</e1> is less than <e2>400 millimetres</e2>.",less,synthetic
+b6b19c38-b160-475d-b01d-e3880ca00ab2,"Where necessary, flexible ducts may be used for final connections, but their lengths should be kept to a minimum.",{'ID': '31_UK_DocF_V2_Ventilation'},"Where necessary, <e1>flexible ducts</e1> may be used for final <e2>connections</e2>, but their lengths should be kept to a minimum.",necessity,annotated
+09b2a395-5293-4b7d-82d4-5312482d59e9,"Door entry controls, where provided, are mounted 900-1000mm above finished ground level, and at least 300mm away from any projecting corner.",{'ID': '46_UK_DocM_V1_AccessAndUseOfBuildings'},"Door entry controls, where provided, are mounted <e1>900-1000mm</e1> <e2>above</e2> finished ground level, and at least 300mm away from any projecting corner.",equal,annotated
+2abae1a0-074b-4b23-ac5d-82c98cf4211d,"Lift door systems should be designed to allow adequate time for people, and any assistance dogs, to enter or leave the lift without coming into contact with closing doors.",{'ID': '111_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Lift door systems</e1> should be <e2>designed to allow adequate time for people, and any assistance dogs, to enter or leave the lift without coming into contact with closing doors</e2>.",necessity,annotated
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c_3,,,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be <e1>density</e1> <e2>4</e2>.",equal,synthetic
+569c7958-b7d6-4b9c-9dd9-13307e95e59b,"For ducted systems that are served by fans with a design flow rate greater than 1m3/s, ductwork leakage tests should be carried out.",{'ID': '385_UK_DocM_V2_AccessAndUseOfBuildings'},"For ducted systems that are <e1>served by fans</e1> with a design flow rate greater than <e2>1m3/s</e2>, ductwork leakage tests should be carried out.",none,annotated
+8e9ef8dc-18bd-4877-98cd-556aa4adee8f,"Reasonable provision shall be made for the conservation of fuel and power in buildings by: (a) limiting heat gains and losses (i) through thermal elements and other parts of the building fabric; and (ii) from pipes, ducts and vessels used for space heating, space cooling and hot water services; (b) providing fixed building services which (i) are energy efficient to a reasonable standard; (ii) have effective controls; and (iii) are commissioned by testing and adjusting as necessary to ensure they use no more fuel and power than is reasonable in the circumstances.",{'ID': '431_UK_DocM_V2_AccessAndUseOfBuildings'},"Reasonable provision shall be made for the conservation of fuel and power in <e1>buildings</e1> by: (a) limiting heat gains and losses (i) through thermal elements and other parts of the building fabric; and (ii) from pipes, ducts and vessels used for space heating, space cooling and hot water services; (b) <e2>providing fixed building services</e2> which (i) are energy efficient to a reasonable standard; (ii) have effective controls; and (iii) are commissioned by testing and adjusting as necessary to ensure they use no more fuel and power than is reasonable in the circumstances.",none,annotated
+3724fd47-22f7-432c-81a2-1abcb95c7df2,"The total number of ventilators installed in a dwellings habitable rooms and kitchens should be no fewer than five, except in one bedroom properties, where there should be no fewer than four.",{'ID': '96_UK_DocF_V1_Ventilation'},"The total number of ventilators installed in a <e1>dwellings</e1> <e2>habitable rooms</e2> and kitchens should be no fewer than five, except in one bedroom properties, where there should be no fewer than four.",part-of,annotated
+43e26628-8b62-4cc6-91e2-284335df1564,"In  rooms  used  for  sleeping  or  rest,  the  one-hour  A-weighted  equivalent continuous sound level of impulsive, narrow-band or low-frequency noise may not exceed 25 decibels.",{'ID': '17_Finnish_AcousticEnvironment'},"In rooms used for sleeping or rest, the <e1>one-hour A-weighted equivalent continuous sound level of impulsive, narrow-band or low-frequency noise</e1> may not exceed <e2>25 decibels</e2>.",less-equal,annotated
+1320873f-de9b-4c55-a7c0-67f545c4a46e,"All access routes to principal, or alternative accessible, entrances should be surfaced so that people are able to travel along them easily, without excessive effort and without the risk of tripping or falling.",{'ID': '42_UK_DocM_V2_AccessAndUseOfBuildings'},"All <e1>access routes</e1> to principal, or alternative accessible, entrances should be <e2>surfaced</e2> so that people are able to travel along them easily, without excessive effort and without the risk of tripping or falling.",necessity,annotated
+dcc583b1-8c4c-42cf-a1ed-e8907de56254,"The rise of the indoor steps of other spaces intended for everyday use may be no more than 180 millimetres, and the tread must be no less than 270 millimetres.",{'ID': '23_Finnish_SafetyOfUse'},"The rise of the <e1>indoor</e1> steps of other spaces intended for everyday use may be no more than 180 millimetres, and the <e2>tread</e2> must be no less than 270 millimetres.",none,annotated
+da4d5959-6e64-4e04-a1f3-8b42b6addab0_11,,,The outdoor <e1>patterns</e1> used in the calculations for buildings other than those in intended use categories 1 and 2 outside the occupancy period shall be at least <e2>three metres</e2>.,greater-equal,synthetic
+590ab551-79e8-42f5-bc52-749f8899c088,Extinguishing routes to basement storeys shall be arranged so that basement storeys can be reached from the ground level without a need to pass through the exits of the storeys.,{'ID': '242_Finnish_FireSafety'},<e1>Extinguishing routes</e1> <e2>to basement storeys</e2> shall be arranged so that basement storeys can be reached from the ground level without a need to pass through the exits of the storeys.,selection,annotated
+e15250c0-1279-4d29-a1ec-31560b045007,Extinguishing routes of basement storeys must not be connected to fire and smoke-proof exits.,{'ID': '244_Finnish_FireSafety'},<e1>Extinguishing routes</e1> of <e2>basement storeys</e2> must not be connected to fire and smoke-proof exits.,part-of,annotated
+f3bd99b4-7ea5-4968-af10-3c133c0b5aa0,No individual flight has a rise between landings of more than 1800mm.,{'ID': '42_UK_DocM_V1_AccessAndUseOfBuildings'},No individual flight has a <e1>rise between landings</e1> of more than <e2>1800mm</e2>.,less-equal,annotated
+2ca092ec-4425-4552-a389-fd0dadfbd154,NOTE: A floor level with a gradient of 1:20 or steeper should be designed as a ramp.,{'ID': '54_UK_DocK_ProtectionFromFalling'},NOTE: A floor level with a <e1>gradient</e1> of <e2>1:20</e2> or steeper should be designed as a ramp.,greater-equal,annotated
+0cafda73-ee3a-4a99-a224-2d142de63618,"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",{'ID': '238_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a wet <e1>heating system</e1> is either: a. <e2>newly installed</e2> b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",selection,annotated
+7db23e3b-7063-47a3-b65e-5d02ad78c922,"In a natural ventilation system, the ventilation valves shall be easy to close.",{'ID': '49_Finnish_Health-IndoorClimateAndVentilation'},"In a natural ventilation system, the <e1>ventilation valves</e1> shall be <e2>easy to close</e2>.",necessity,annotated
+5b4380ba-0066-4735-a362-316d4c8e70b2_1,,,"Where a building undergoing major renovation, which is not a residential building or a mixeduse building, will have more than <e1>9mm</e1> <e2>emergency exits</e2> after the major renovation is completed (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.",greater,synthetic
+9027959e-efc1-4d32-acbe-e0775d40f001_7,,,"The morticed bolts should have a minimum <e1>Unit length</e1> of <e2>900mm</e2>, should be at least 100mm from the top and bottom corners of the door, and should avoid any door construction joints.",greater-equal,synthetic
+9b594ead-759a-420d-8d1c-52f007daaca4,"Each office should have the means to provide purge ventilation, to reduce pollutants before the office space is occupied or after activities such as painting.",{'ID': '56_UK_DocF_V2_Ventilation'},"Each office should have the <e1>means</e1> to provide purge ventilation, to <e2>reduce pollutants before the office space is occupied or after activities such as painting</e2>.",selection,annotated
+bfdf95da-d422-47cd-83d7-a30a4969f2e6_4,,,"If the internal ties must be centred on the supporting line, the minimum value of the <e1>visual contrast</e1>, <e2>0.35W/(m2K)</e2>, will also be applied to internal ties.",greater-equal,synthetic
+76bf63bd-30f4-440d-81a0-61ca16170f70_6,,,Control should be maximised and heat gain to uninsulated pipes should only be permitted where the <e1>extract air categories</e1> is less than <e2>One</e2> of the total load.,less,synthetic
+38cd3221-7fc9-4462-be20-78b16a4309d3,The area of openings in the newly created dwelling should not be more than 25 of the total floor area.,{'ID': '490_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>area</e1> of openings in the newly created dwelling should not be more than <e2>25</e2> of the total floor area.,less-equal,annotated
+41d06a37-5039-4dc0-aae1-0fe3abbd84fc,The building fabric should be constructed so that the insulation is reasonably continuous across newly built elements.,{'ID': '132_UK_DocL_V1_ConsrvationOfFuelAndPower'},The building fabric should be <e1>constructed</e1> so that the <e2>insulation</e2> is reasonably continuous across newly built elements.,selection,annotated
+3f7c10d1-d801-4351-bc85-187cf8cffeb3,The water vapour resistance and air tightness of external walls and their various layers as well as the structures attached to the external wall and joints to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,{'ID': '96_Finnish_Health-Humidity'},The <e1>water vapour resistance</e1> and air tightness of external walls and their various layers as well as the <e2>structures</e2> attached to the external wall and joints to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,part-of,annotated
+561480d1-56e5-41be-a56d-f2f2222bcb17,"Any damage, such as tears, should be repaired before boarding.",{'ID': '185_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Any <e1>damage</e1>, such as tears, should be <e2>repaired before boarding</e2>.",necessity,annotated
+c236bc17-ef9a-4694-a34e-68a9f38ae405,"For a heat exchanger between a solar primary and secondary system, a minimum of 0.1m2 or equivalent of heat exchanger area should be provided for every 1m2 of the net absorber area of the solar collector.",{'ID': '323_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For a heat exchanger between a solar primary and secondary system, a minimum of 0.1m2 or equivalent of heat exchanger area should be provided for <e1>every 1m2</e1> of the <e2>net absorber area</e2> of the solar collector.",selection,annotated
+e728e1af-4952-4010-a0bf-3723d54bc450,"Ventilation shall provide healthy, safe and comfortable indoor air quality in occupiable spaces.",{'ID': '45_Finnish_Health-IndoorClimateAndVentilation'},"<e1>Ventilation</e1> shall <e2>provide healthy, safe and comfortable indoor air quality in occupiable spaces</e2>.",necessity,annotated
+6a41a473-bd3c-4e38-a093-094b3fdae388_9,,,"At least one in every <e1>1,200 MJ/m2</e1> remaining <e2>thermal element</e2> must be provided with cable routes.",equal,synthetic
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_8,,,"The wall ties should have a <e1>relationship</e1> of <e2>900-1000mm</e2> and a vertical spacing of 450mm, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",equal,synthetic
+2afa8bba-b5ad-4e12-bc27-4beea3fd09b2,The normal relationship between the dimensions of the rise and going is: twice the rise plus the going (2R G) equals between 550mm and 700mm.,{'ID': '19_UK_DocK_ProtectionFromFalling'},The normal relationship between the dimensions of the rise and going is: <e1>twice the rise plus the going (2R G)</e1> equals <e2>between 550mm and 700mm</e2>.,equal,annotated
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_8,,,"The wall ties should have a horizontal spacing of 900mm and a vertical spacing of 450mm, or alternatively should be spaced such that the <e1>travel distance</e1> is not less than <e2>100mm</e2>.",greater-equal,synthetic
+8e8f4fb5-00b5-404f-89df-a07287984748_5,,,"In buildings with a <e1>going</e1> greater than <e2>18 dm3/s</e2>, automatic meter reading and data collection facilities should be installed.",greater,synthetic
+45adb0b6-63ee-4f42-b6a3-8fc396221c67_6,,,The <e1>dimension</e1> of the insulation plus any required air gap should be at least to the <e2>specification</e2> of the rafters.,greater-equal,synthetic
+5869233a-4fc0-48bf-9007-2b0c9a169fef,"A building shall, if its size, number of storeys or an intended purpose of a premises within the building so requires, be divided into fire compartments in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",{'ID': '100_Finnish_FireSafety'},"A building shall, if its size, <e1>number of storeys</e1> or an intended purpose of a premises within the building so requires, be divided into fire compartments in order to restrict the spread of fire and smoke, to provide safe evacuation and to <e2>facilitate rescue and extinguishing measures</e2>.",none,annotated
+992e8f11-81ac-4d2f-b7d1-60e46b4b7261,Wheelchair accessible dwellings must also provide both a level access shower and a bath.,{'ID': '108_UK_DocM_V1_AccessAndUseOfBuildings'},Wheelchair accessible dwellings must also provide both a <e1>level access</e1> <e2>shower</e2> and a bath.,selection,annotated
+cc72106e-9e7f-47cf-8a95-0173a8305dad_10,,,"In a new building, the crawl space <e1>luminous efficacy</e1> must be <e2>25</e2> on average at the minimum.",greater-equal,synthetic
+0cafda73-ee3a-4a99-a224-2d142de63618,"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",{'ID': '238_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a wet <e1>heating system</e1> is either: a. newly installed b. fully replaced in an existing <e2>building</e2>, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",part-of,annotated
+0ea1e862-2434-4fc8-97a2-b076c992ef20_5,,,"The <e1>number of wall ties per square metre</e1> of an exit must be at least <e2>twice the rise plus the going (2R G)</e2> and its free height must be at least 2,100 millimetres.",greater-equal,synthetic
+11f2902d-29c2-474e-97d0-628a2a97a666_4,,,"<e1>topography</e1> of over <e2>150m2</e2> must be equipped with an appropriate safety barrier, railing or handrail.",greater,synthetic
+d0927095-9e43-4ce4-a740-d5df69dc1dc3,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",{'ID': '84_Finnish_Health-IndoorClimateAndVentilation'},"If the air flows of <e1>extract air categories</e1> <e2>1</e2> and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,annotated
+0aaf71f0-a482-4a72-a407-0d6db79c7f6f_2,,,"In a building consisting primarily of one storey, no more than 200 m2 of fire-compartmented and no more than <e1>ten millimetres</e1> of non-fire-compartmented <e2>Skirtings</e2> that essentially relate to the business of the building may be located on the level of second storey.",less-equal,synthetic
+203faa23-7b71-47c9-a6e5-2333ac45389e_5,,,"The <e1>minimum value</e1> of the indoor steps of dwelling units and living quarters may be no more than <e2>EI 15</e2>, and the tread must be no less than 250 millimetres.",less-equal,synthetic
+7d1ada0b-8dcc-4c01-84d7-78b80cb404c9,"If there are not enough associated parking spaces outside of the covered car park to meet the requirement to install electric vehicle charge points, then cable routes should be installed for associated parking spaces within the covered car park.",{'ID': '58_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If there are not enough associated parking spaces outside of the covered car park to meet the requirement to install electric vehicle charge points, then <e1>cable routes</e1> should be installed for associated parking spaces within the covered <e2>car park</e2>.",none,annotated
+8cef7dc5-2d76-4dd8-80c5-6861b11a8f6f_1,,,"Where the work concerns a building containing more than <e1>400mm</e1> <e2>public areas</e2>, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",greater-equal,synthetic
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_9,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the <e1>difference in light reflectance value</e1> from these spaces does not exceed <e2>three</e2> of the total air flow in the vertical duct.",less-equal,synthetic
+1ebce0c9-705c-47ee-8429-e83cfbed72db,"All walls, ducts and boxings to every WC/cloakroom, bath and shower room are strong enough to support grab rails, seats and other adaptations that could impose a load of 1.5kN/m2.",{'ID': '103_UK_DocM_V1_AccessAndUseOfBuildings'},"All <e1>walls</e1>, <e2>ducts</e2> and boxings to every WC/cloakroom, bath and shower room are strong enough to support grab rails, seats and other adaptations that could impose a load of 1.5kN/m2.",none,annotated
+2695c899-0ada-478c-9b2d-796f79ea4c52,"Glazing, with which people are likely to come into contact whilst moving in or about the building shall: (a) if broken on impact, break in a way which is unlikely to cause injury; or (b) resist impact without breaking; or (c) be shielded or protected from impact.",{'ID': '92_UK_DocK_ProtectionFromFalling'},"Glazing, with which people are likely to come into contact whilst moving in or about the building shall: (a) if <e1>broken on impact</e1>, break in a way which is unlikely to cause injury; or (b) resist impact without breaking; or (c) <e2>be shielded or protected from impact</e2>.",none,annotated
+fb5d3054-4911-4049-ba09-1c3e80f9c07c_4,,,"The tread of steps in uncovered or unheated outdoor staircases must be no less than 390 millimetres, and the <e1>supports</e1> may be no more than <e2>01:20:00</e2>.",less-equal,synthetic
+5ebe90af-93ee-4d92-96fd-44b674d5e1a5,Systems should be designed so that they can be commissioned to suitable ventilation rates so that spaces are not significantly over-ventilated.,{'ID': '335_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Systems</e1> should be <e2>designed</e2> so that they can be commissioned to suitable ventilation rates so that spaces are not significantly over-ventilated.,necessity,annotated
+5e7d4831-4ec8-48f9-9e60-0422fcc1eae4,"When replacing an existing system, the installed generation capacity of the new system should be no less than that of the existing system, except where a smaller system can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",{'ID': '344_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When replacing an existing system, the installed generation capacity of the new system should be no less than that of the <e1>existing</e1> <e2>system</e2>, except where a smaller system can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",selection,annotated
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_3,,,"In buildings more than <e1>1100mm</e1> and at most 28 metres in <e2>opening</e2>, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",greater,synthetic
+00cded8a-5208-4c1b-bda4-9677d45b9375,The layers of attic floor structures and the ventilation must prevent the accumulation of damaging moisture into the roof structure resulting from water vapour diffusion or airflow.,{'ID': '105_Finnish_Health-Humidity'},The layers of <e1>attic</e1> <e2>floor structures</e2> and the ventilation must prevent the accumulation of damaging moisture into the roof structure resulting from water vapour diffusion or airflow.,part-of,annotated
+d504fd87-d13d-4936-9d7a-71d17954760d_4,,,The <e1>performance</e1> of the steps in an exit may be no more than <e2>six metres</e2>.,less-equal,synthetic
+77be05f2-cd8c-4d35-85e4-6637b999d8e7_7,,,The <e1>automatic flow adjustment</e1> of the consequential improvement works should not be less than <e2>9 metres</e2> of the value of the principal works.,greater-equal,synthetic
+9691451a-57d5-484f-a346-0f83b59f7ae0,"Refreshment facilities, such as restaurants and bars, should be designed so that they can be reached and used by all people independently or with companions.",{'ID': '137_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Refreshment facilities</e1>, such as restaurants and bars, should be <e2>designed</e2> so that they can be reached and used by all people independently or with companions.",necessity,annotated
+596cc55c-f50f-4155-962f-832b87226a8e,"For mechanical ventilation systems, fan units should be appropriately sized so that fans operating in normal background ventilation mode are not overly noisy.",{'ID': '23_UK_DocF_V1_Ventilation'},"For mechanical ventilation systems, fan units should be appropriately sized so that fans <e1>operating in normal background ventilation mode</e1> are <e2>not overly noisy</e2>.",none,annotated
+bf798097-bb99-42d0-a73f-8cebab8fbeb8,"In the entrance halls and other indoor areas of administrative, service and business premises and in assembly areas, the riser of the steps must be no more than 160 millimetres and the tread must be no less than 300 millimetres.",{'ID': '21_Finnish_SafetyOfUse'},"In the entrance halls and other indoor areas of administrative, service and business premises and in assembly areas, the riser of the steps must be no more than 160 millimetres and the <e1>tread</e1> must be no less than <e2>300 millimetres</e2>.",greater-equal,annotated
+ddc0bba6-2df8-43e1-9398-37514366fb06,"For fixed terminals with automatic flow adjustment at the fan unit, the fan speed should be set to achieve the desired continuous flow rate.",{'ID': '208_UK_DocF_V1_Ventilation'},"For fixed <e1>terminals</e1> with automatic flow adjustment at the fan unit, the <e2>fan</e2> speed should be set to achieve the desired continuous flow rate.",none,annotated
+b0e99ac5-9cbc-4beb-b8ff-85383ae70ea8,"The approach route should be safe and convenient, adopt the shallowest gradient that can reasonably be achieved and be step-free, irrespective of the storey on which the dwelling is located.",{'ID': '40_UK_DocM_V1_AccessAndUseOfBuildings'},"The <e1>approach route</e1> should be safe and <e2>convenient</e2>, adopt the shallowest gradient that can reasonably be achieved and be step-free, irrespective of the storey on which the dwelling is located.",necessity,annotated
+d43e4877-601c-43eb-9d33-96945754374b,Good acoustic design should be employed to achieve an acoustic environment that is neither too reverberant nor too absorbent so that announcements and conversations can be heard clearly.,{'ID': '99_UK_DocM_V2_AccessAndUseOfBuildings'},Good <e1>acoustic design</e1> should be <e2>employed to achieve</e2> an acoustic environment that is neither too reverberant nor too absorbent so that announcements and conversations can be heard clearly.,necessity,annotated
+7d877df3-9aa7-4dff-a64d-5356a66c944d,"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a width exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",{'ID': '59_Finnish_SafetyOfUse'},"In public <e1>outdoor and indoor spaces</e1>, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a width exceeding 2.4 metres and are located in assembly areas, it must also be <e2>placed so as to divide the passageway into parts no wider than the abovementioned width</e2>.",none,annotated
+37f01a2c-b944-45a2-a7f4-140d8c03d7ac_6,,,"After rebating, frame components should retain at least <e1>130 millimetres</e1> of <e2>Floors</e2>.",greater-equal,synthetic
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be class E 15.",{'ID': '134_Finnish_FireSafety'},"The <e1>fire compartmenting requirement</e1> for the balcony slab of a glazed balcony of a building exceeding two storeys is <e2>EI 30</e2>; however, minor sealing parts and penetrations may be class E 15.",equal,annotated
+569c7958-b7d6-4b9c-9dd9-13307e95e59b_5,,,"For ducted systems that are served by fans with a <e1>Capacities</e1> greater than <e2>01:08:00</e2>, ductwork leakage tests should be carried out.",greater,synthetic
+0d8c2f7d-5234-4bec-bbbe-961e499ebbbc,"A proportion of the sleeping accommodation in hotels, motels and student accommodation should be designed for independent use by wheelchair users.",{'ID': '129_UK_DocM_V2_AccessAndUseOfBuildings'},"A proportion of the <e1>sleeping accommodation</e1> in hotels, motels and <e2>student accommodation</e2> should be designed for independent use by wheelchair users.",part-of,annotated
+df122091-ca53-4134-98a3-47779c06f9df,The index terminal flow rate should be set with the terminal fully open and all other terminals should be adjusted to achieve the required flows at each terminal.,{'ID': '198_UK_DocF_V1_Ventilation'},The index terminal <e1>flow rate</e1> should be <e2>set with the terminal fully open</e2> and all other terminals should be adjusted to achieve the required flows at each terminal.,necessity,annotated
+f505cec8-d1a6-41ae-b2ba-68ac19f64be2,"If other performance (e.g. wind load, safety, security or acoustic attenuation) requires thicker glass to be used, an equivalent window unit with standard thickness glazing should be shown to meet the required standard.",{'ID': '137_UK_DocM_V2_AccessAndUseOfBuildings'},"If other performance (e.g. wind load, safety, security or acoustic attenuation) requires thicker glass to be used, an equivalent <e1>window unit</e1> with <e2>standard thickness</e2> glazing should be shown to meet the required standard.",none,annotated
+81314489-dcd9-410f-9b15-595b87e7c8f9_8,,,"The resilient layer should be timber sheathing at least <e1>1m3/s</e1> <e2>water temperature</e2>, expanded metal or a similar resilient material.",greater-equal,synthetic
+77f993c6-dff1-4f9a-8f66-73221d3cbaff,"If the dwelling only has one habitable room, a minimum ventilation rate of 13l/s should be used.",{'ID': '43_UK_DocF_V1_Ventilation'},"If the <e1>dwelling</e1> only has one habitable room, a minimum <e2>ventilation rate</e2> of 13l/s should be used.",part-of,annotated
+0a7ff0c7-c5f9-4069-9d7e-2bfd6c4871d3_9,,,The <e1>continuity</e1> of the extension does not exceed <e2>10</e2>.,less-equal,synthetic
+8cef7dc5-2d76-4dd8-80c5-6861b11a8f6f_0,,,"Where the work concerns a building containing more than <e1>9mm</e1> <e2>method</e2>, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",greater-equal,synthetic
+50e89a86-e2be-439d-b230-79274cd7199b,Modular and portable buildings with a planned service life of more than two years at a single location should be shown to comply with the energy efficiency requirements.,{'ID': '81_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Modular</e1> and portable buildings with a planned service life of more than two years <e2>at a single location</e2> should be shown to comply with the energy efficiency requirements.,none,annotated
+8e5e9560-4b22-4fe0-ad86-e52b82ffe4d2,"When  calculating  the  energy  consumption  of  a  buildings  cooling  system,  the  energy consumption of cooling energy production and the electrical energy consumption of auxiliary units  shall  be  taken  into  account  where  the  use  of  the  systems  is  required  for  indoor temperature control.",{'ID': '111_Finnish_EnergyEfficiency'},"When calculating the energy consumption of a buildings cooling system, the energy consumption of cooling energy production and the electrical <e1>energy consumption</e1> of auxiliary units shall be <e2>taken into account where the use of the systems is required for indoor temperature control</e2>.",necessity,annotated
+"8feaf7f2-dfd8-43ae-ab8d-791ee1ffd86c	However, if the elevation difference is no more than 1,000 millimetres, the ramp may not have a gradient of more than eight per cent.	{'ID': '9_Finnish_Accessibility'}_0",,,"However, if the <e1>habitable area</e1> is no more than <e2>1.2W/(m2K)</e2>, the ramp may not have a gradient of more than eight per cent.",less-equal,synthetic
+103f99ad-884b-4bae-9f22-ccb1c5bc3d26_5,,,"In an open garage of no more than <e1>two</e1> <e2>walls</e2>, the maximum area may be used as the surface area of the storeys, even though the driveways between the various storeys are combined.",less-equal,synthetic
+0667134c-1290-4fe0-99eb-41c0b9e63a27,CO2 emissions and primary energy associated with the thermal energy streams of a trigeneration scheme should be attributed in proportion to the output energy streams.,{'ID': '67_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>CO2 emissions</e1> and primary energy associated with the thermal energy streams of a trigeneration scheme should be <e2>attributed in proportion to the output energy streams</e2>.,necessity,annotated
+64695439-3458-4d43-8e7b-a2ba75075cea,"There must be safe and easily accessible, uninterrupted access routes to any chimneys, ventilation equipment and other building equipment and structural elements that are located on the roof of the building and that must be accessed regularly.",{'ID': '124_Finnish_SafetyOfUse'},"There must be safe and easily accessible, <e1>uninterrupted</e1> <e2>access routes</e2> to any chimneys, ventilation equipment and other building equipment and structural elements that are located on the roof of the building and that must be accessed regularly.",selection,annotated
+e32bbb47-c826-40c1-8ea4-8c32353d3fd2_8,,,There shall be <e1>75 light source lumens per circuit-watt</e1> of <e2>Ground floors</e2> provided for people in the building.,equal,synthetic
+46f5be2a-1514-420b-bc39-331fc6e0d2df_4,,,"The <e1>floor area</e1>, dwelling emission rate and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the <e2>energy efficiency measures</e2>, target emission rate and target fabric energy efficiency rate, respectively.",less-equal,synthetic
+baee716c-b8c2-4500-b4de-63fa11f007b1_8,,,A minimum of <e1>eight per cent</e1> in five of the remaining <e2>air pressure test</e2> must have access to cable routes.,greater-equal,synthetic
+9415ae4b-7a74-4c70-a245-e4381c6d71bf,"At gables and party walls, insulation should extend to the wall; if the space between the wall and joist is less than 100mm, perimeter insulation may be required.",{'ID': '170_UK_DocL_V1_ConsrvationOfFuelAndPower'},"At gables and party walls, <e1>insulation</e1> should extend to the wall; if the space between the wall and joist is less than <e2>100mm</e2>, perimeter insulation may be required.",none,annotated
+922bf8df-3a70-4f45-8c04-200b638d3b3c,The cold water pipe shall be designed and installed so that the temperature in the cold water system may not exceed 20 degrees Celsius.,{'ID': '59_Finnish_Health-WaterAndSewerage'},The cold water pipe shall be designed and installed so that the <e1>temperature</e1> in the cold water system may not exceed <e2>20 degrees Celsius</e2>.,less-equal,annotated
+a43037b0-8e35-45a2-9f23-c2d65f6c5a64,"Where access to the dwelling can be gained via an interconnecting doorset from the garage, then either the garage doorset (pedestrian and vehicular) or the interconnecting doorset should be a secure doorset.",{'ID': '8_UK_DocQ_Security_Dwellings'},"Where access to the dwelling can be gained via an interconnecting doorset from the garage, then either the <e1>garage doorset</e1> (pedestrian and <e2>vehicular</e2>) or the interconnecting doorset should be a secure doorset.",selection,annotated
+88e23b46-22d9-4be6-87b7-40541f7995a9,"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the distance of the uppermost floor level from the entry level exceeds 24 metres; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",{'ID': '254_Finnish_FireSafety'},"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises <e1>above the entry level of the building</e1>, when the distance of the uppermost floor level from the entry level exceeds 24 metres; 2) in the premises below the entry level of the building, when the <e2>distance of the basement storey floor from the entry level</e2> exceeds 14 metres.",none,annotated
+01d924bf-4a69-4eb8-b05e-ce993aee3d45_1,,,Perimeter insulation should be continuous and have a minimum <e1>measures</e1> of <e2>300 litres</e2>.,greater-equal,synthetic
+77f993c6-dff1-4f9a-8f66-73221d3cbaff_8,,,"If the dwelling only has one habitable room, a minimum <e1>control function</e1> of <e2>1,200 millimetres</e2> should be used.",greater-equal,synthetic
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility <e1>intended for public use</e1>; 6. technical utility room <e2>with a possibility to water damage</e2>; 7. car wash facility; 8. special facilities cleansed by water rinsing.",none,annotated
+29c431ee-ea93-491d-ab13-06418d93c488,"If luminous efficacy is greater than 75 light source lumens per circuit-watt, manual control is acceptable.",{'ID': '338_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If luminous efficacy is greater than 75 light source lumens per circuit-watt, manual <e1>control</e1> is <e2>acceptable</e2>.",selection,annotated
+23db27ac-b594-4b26-883d-922d713d382a,"When installing or renovating thermal elements, the element being installed should be draught-proofed and airleakage gaps should be filled.",{'ID': '161_UK_DocM_V2_AccessAndUseOfBuildings'},"When <e1>installing</e1> or renovating thermal elements, the element being installed should be draught-proofed and airleakage gaps should be <e2>filled</e2>.",none,annotated
+a5e9c36f-358f-4375-943c-6d5b89c82647,"Any abrupt level differences of over 0.7 metres and any precipices located in the vicinity of common play and recreation areas associated with buildings with more than two dwellings must be indicated by appropriate barriers or suitable planted areas, or outfitted with a base that cushions any fall.",{'ID': '92_Finnish_SafetyOfUse'},"Any abrupt level differences of over 0.7 metres and any precipices located in the vicinity of common play and recreation areas associated with buildings with more than two <e1>dwellings</e1> must be <e2>indicated by appropriate barriers or suitable planted areas</e2>, or outfitted with a base that cushions any fall.",none,annotated
+aa41a5d4-c0b1-4da7-84a0-5c2e2738654f,The total number of ventilators installed in the dwellings habitable rooms and kitchens should be at least the following: Five ventilators if the dwelling has more than one bedroom.,{'ID': '89_UK_DocF_V1_Ventilation'},The <e1>total number of ventilators</e1> installed in the dwellings habitable rooms and <e2>kitchens</e2> should be at least the following: Five ventilators if the dwelling has more than one bedroom.,part-of,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479_11,,,Individual flights are: for gradients up to 1:15 not more than 10m long; for <e1>air extract rate</e1> up to <e2>ten millimetres</e2> not more than 5m long.,less-equal,synthetic
+239bd568-c5f2-4ab5-955c-f2d8d86b7b7f,"Where closing devices are needed for fire control, electrically powered hold-open devices or swing-free closing devices should be used as appropriate.",{'ID': '90_UK_DocM_V2_AccessAndUseOfBuildings'},"Where closing devices are needed for fire control, electrically powered hold-open devices or <e1>swing-free</e1> <e2>closing devices</e2> should be used as appropriate.",selection,annotated
+656aa2fa-18cb-41ee-ae28-28deb3dffcc3_8,,,The <e1>termination points</e1> of the water in the hot water system shall be at least <e2>90mm</e2> and available from the hot water plumbing fixture within 20 seconds.,greater-equal,synthetic
+73a6e4e0-c157-4cae-bc28-c0788f6a1e53,"Activation (e.g. motion sensors and push buttons), safety features and the time-lapse allowed for entry and exit through powered door systems should be carefully considered to suit the needs of people who cannot react quickly.",{'ID': '73_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Activation</e1> (e.g. motion sensors and push buttons), safety features and the time-lapse allowed for entry and <e2>exit</e2> through powered door systems should be carefully considered to suit the needs of people who cannot react quickly.",part-of,annotated
+8cfa23d5-d9d3-4d72-a761-6595f876d577,NOTE: Ventilation through infiltration should be considered to be part of the ventilation provision of a building.,{'ID': '79_UK_DocF_V2_Ventilation'},NOTE: <e1>Ventilation</e1> <e2>through infiltration</e2> should be considered to be part of the ventilation provision of a building.,selection,annotated
+29c431ee-ea93-491d-ab13-06418d93c488_3,,,"If <e1>domestic hot water circulation heat loss</e1> is greater than <e2>0.055555556</e2>, manual control is acceptable.",greater,synthetic
+9952f64d-e0df-4b03-84af-150782f81387_8,,,"For mobility-impaired people, a <e1>conference facility</e1> of at least <e2>180 millimetres</e2> is preferred.",greater-equal,synthetic
+f06f7ec1-3b83-4e1a-a421-b09589f2374c,"Provision shall be made to prevent any door or gate: (a) which slides or opens upwards, from falling onto any person; and (b) which is powered, from trapping any person.",{'ID': '114_UK_DocK_ProtectionFromFalling'},"Provision shall be made to prevent any <e1>door or gate</e1>: (a) <e2>which slides or opens upwards</e2>, from falling onto any person; and (b) which is powered, from trapping any person.",selection,annotated
+bfdf95da-d422-47cd-83d7-a30a4969f2e6_9,,,"If the internal ties must be centred on the supporting line, the minimum value of the <e1>proportion</e1>, <e2>0.8 metres</e2>, will also be applied to internal ties.",greater-equal,synthetic
+2f75848b-a39a-41d3-a6bf-25ef1154bcff,"Where appropriate, these should be automated (with manual override) so that energy savings are maximised.",{'ID': '322_UK_DocM_V2_AccessAndUseOfBuildings'},"Where appropriate, <e1>these</e1> should be <e2>automated (with manual override)</e2> so that energy savings are maximised.",necessity,annotated
+4b510cad-fefb-44be-a9cb-a26e0c42994c,"If the building is connected to a heating system where heat is conveyed via heat pipes external to the building from a shared heat exchanger or heat generation unit to several buildings, the heat loss from those pipes shall be divided between the buildings in proportion to their areas.",{'ID': '101_Finnish_EnergyEfficiency'},"If the <e1>building</e1> is connected to a <e2>heating system</e2> where heat is conveyed via heat pipes external to the building from a shared heat exchanger or heat generation unit to several buildings, the heat loss from those pipes shall be divided between the buildings in proportion to their areas.",part-of,annotated
+38020928-c137-486e-88d7-c8feec038c99,A building must be provided with a fire wall if it is situated adjacent to a neighbouring building or so close to a neighbouring building that the spread of fire is evident.,{'ID': '189_Finnish_FireSafety'},A <e1>building</e1> must be provided with a fire wall if it is situated adjacent to a neighbouring building or <e2>so close to a neighbouring building that the spread of fire is evident</e2>.,none,annotated
+0096a3bf-ac16-4a75-adf9-8c3f4a9b8610_0,,,The smaller <e1>differences</e1> of each panel which can be either the width or height of the panel should be <e2>15 degrees</e2> or less.,less-equal,synthetic
+3e9fc57e-bc69-4f17-a056-dd7767afa9bb,"If the height of the building does not exceed 28 metres, access to the attic fire compartments from the outside shall be required.",{'ID': '241_Finnish_FireSafety'},"If the height of the <e1>building</e1> does not exceed 28 metres, <e2>access</e2> to the attic fire compartments from the outside shall be required.",none,annotated
+8151be81-09ad-4dac-b2d2-f0d757915b6c_3,,,"However, when the snow load can occur, the <e1>fastening points</e1> of the load s should be at least <e2>50mm</e2>.",greater-equal,synthetic
+bb3ac5b0-14d0-4d75-95d9-713adc6f2f58,"Any walls, doors and windows should be insulated and draught-proofed to at least the same extent as in the existing dwelling.",{'ID': '433_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Any walls, doors and <e1>windows</e1> should be <e2>insulated</e2> and draught-proofed to at least the same extent as in the existing dwelling.",necessity,annotated
+01008f69-874b-443e-bcb2-2f5630280049_5,,,"If stairs are used only as an emergency exit and if they lead to spaces in a dwelling or accommodation facility other than those that are necessary for living, the <e1>open outwards</e1> may be no more than <e2>250 millimetres</e2> and the tread must be no less than 220 millimetres.",less-equal,synthetic
+825053cb-af5d-43a9-b59b-e2a5ae78ea73,The total number of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the number of dwellings in the residential building; b. the number of associated parking spaces.,{'ID': '59_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},The total number of associated <e1>parking spaces</e1> which <e2>have access to either: a. cable routes; b. an electric vehicle charge point</e2> should be the greater of the following: a. the number of dwellings in the residential building; b. the number of associated parking spaces.,selection,annotated
+4fc3b5b1-a838-4429-b385-d8e80e6633eb,"In the absence of relevant harmonised European Standards, products with a travel exceeding 3m must have a product certificate issued by a Notified Body.",{'ID': '117_UK_DocM_V2_AccessAndUseOfBuildings'},"In the absence of relevant harmonised European Standards, products with a <e1>travel</e1> exceeding <e2>3m</e2> must have a product certificate issued by a Notified Body.",greater,annotated
+46f5be2a-1514-420b-bc39-331fc6e0d2df_0,,,"The dwelling primary energy rate, dwelling emission rate and <e1>Signs</e1>, all calculated using the measured air permeability, must not be higher than the target primary energy rate, target emission rate and <e2>that</e2>, respectively.",less-equal,synthetic
+7e34700e-92de-4b00-a820-f4085a2e186c_6,,,"If the <e1>load capacity</e1> between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than <e2>18 dm3/s</e2>, the wall in question must be class EI 15.",less,synthetic
+f5a71c7b-e852-40f2-8f88-91cda7902a7e_8,,,"If a new building has a space heating or airconditioning system with an <e1>energy efficiency measures</e1> greater than <e2>250 millimetres</e2>, a building automation and control system should be installed.",greater,synthetic
+f3c5d35c-ad38-46d6-8a75-1a331555b89e,The index terminal flow rate should be set with the terminal fully open and all other terminals should be adjusted to achieve the required flow rates at each terminal.,{'ID': '206_UK_DocF_V1_Ventilation'},The <e1>index terminal</e1> <e2>flow rate</e2> should be set with the terminal fully open and all other terminals should be adjusted to achieve the required flow rates at each terminal.,part-of,annotated
+"8feaf7f2-dfd8-43ae-ab8d-791ee1ffd86c	However, if the elevation difference is no more than 1,000 millimetres, the ramp may not have a gradient of more than eight per cent.	{'ID': '9_Finnish_Accessibility'}","However, if the elevation difference is no more than 1,000 millimetres, the ramp may not have a gradient of more than eight per cent.",{'ID': '9_Finnish_Accessibility'},"However, if the <e1>elevation difference</e1> is no more than <e2>1,000 millimetres</e2>, the ramp may not have a gradient of more than eight per cent.",less-equal,annotated
+c0a6d35c-cc20-428b-941d-c3e3e6365c74,"In a tier that is uninterrupted by cross-gangways, and where the pitch exceeds 25, use a maximum number of steps of 40.",{'ID': '25_UK_DocK_ProtectionFromFalling'},"In a <e1>tier</e1> that is uninterrupted by cross-gangways, and where the pitch exceeds 25, use a maximum number of <e2>steps</e2> of 40.",part-of,annotated
+bf798097-bb99-42d0-a73f-8cebab8fbeb8_6,,,"In the entrance halls and other indoor areas of administrative, service and business premises and in assembly areas, the riser of the steps must be no more than 160 millimetres and the <e1>rated output</e1> must be no less than <e2>25mm</e2>.",greater-equal,synthetic
+2fad9e0f-fa0d-4a6b-9c63-152ef8828c4d_6,,,An upstand built on site should not exceed a <e1>building primary energy rate</e1> of <e2>400-600mm</e2>.,less-equal,synthetic
+9abdce80-0a4a-400a-8725-205bb3b887e4,"In hard water areas, suitable measures should be taken to treat the feed water to water heaters and the hot water circuit of combination boilers to reduce limescale accumulation.",{'ID': '218_UK_DocM_V2_AccessAndUseOfBuildings'},"In hard water areas, <e1>suitable</e1> <e2>measures</e2> should be taken to treat the feed water to water heaters and the hot water circuit of combination boilers to reduce limescale accumulation.",selection,annotated
+2ca092ec-4425-4552-a389-fd0dadfbd154_4,,,NOTE: A floor level with a <e1>number of storeys</e1> of <e2>certain proportion</e2> or steeper should be designed as a ramp.,greater-equal,synthetic
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_1,,,"In buildings more than 9 metres and at most 28 metres in height, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than <e1>25W/m2</e1> in <e2>atmosphere</e2>, these must be accessible via the interior.",greater,synthetic
+caa5332f-5180-4d07-a41f-e6e0e044a8c1,An existing district heat network that is being connected to a new dwelling should not have a CO2 emission factor for delivered heat to the dwelling which is greater than 0.350kgCO2/kWh.,{'ID': '287_UK_DocL_V1_ConsrvationOfFuelAndPower'},An existing <e1>district heat network</e1> that is being connected to a new dwelling should <e2>not have a CO2 emission factor for delivered heat to the dwelling which is greater than 0.350kgCO2/kWh</e2>.,necessity,annotated
+66249fda-33bf-4d93-8bf9-53fb82ad0e95,"The driveway and parking area at a plot or building site must be separated from pedestrian, play and recreation areas.",{'ID': '87_Finnish_SafetyOfUse'},"The driveway and <e1>parking area</e1> at a plot or building site must be <e2>separated from pedestrian, play and recreation areas</e2>.",necessity,annotated
+8bb9aee2-a950-4a65-a715-287035906789,"Spaces of a non-residential building and common spaces of a residential building as well as the fixtures, fittings and fixed equipment in them shall be suitable for persons with mobility and functional impairment.",{'ID': '27_Finnish_Accessibility'},"<e1>Spaces</e1> of a non-residential building and common spaces of a residential building as well as the fixtures, fittings and fixed equipment in them shall be <e2>suitable for persons with mobility and functional impairment</e2>.",necessity,annotated
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_4,,,"The wall ties should have a <e1>configuration</e1> of <e2>20mm</e2> and a vertical spacing of 450mm, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",equal,synthetic
+73a6e4e0-c157-4cae-bc28-c0788f6a1e53,"Activation (e.g. motion sensors and push buttons), safety features and the time-lapse allowed for entry and exit through powered door systems should be carefully considered to suit the needs of people who cannot react quickly.",{'ID': '73_UK_DocM_V2_AccessAndUseOfBuildings'},"Activation (e.g. motion sensors and push buttons), safety features and the time-lapse allowed for <e1>entry</e1> and exit through powered <e2>door systems</e2> should be carefully considered to suit the needs of people who cannot react quickly.",part-of,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_8,,,"If the air flows of <e1>energy  consumption</e1> 1 and <e2>2,100 millimetres</e2> are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+baee716c-b8c2-4500-b4de-63fa11f007b1_2,,,A minimum of one in <e1>30% load</e1> of the remaining <e2>Fixings</e2> must have access to cable routes.,equal,synthetic
+a4dc06ab-99c3-4c8b-b295-eb3e6a64320a_5,,,"The free <e1>total cost</e1> from the ground or from the surface of a driveway or walkway of the lower edge of a structural element, device or equipment protruding from the building, such as a balcony, bay window, sign, lighting device or awning, must be at least <e2>0.8 metres</e2>, unless the area is protected so as to prevent the danger of collision.",greater-equal,synthetic
+d8a06af7-3a6b-4d68-8bba-342aac6d3ac0,Water pipes and sewers installed in the ground shall be identifiable and they shall be located separate from one another.,{'ID': '146_Finnish_Health-WaterAndSewerage'},<e1>Water pipes</e1> and sewers <e2>installed in the ground</e2> shall be identifiable and they shall be located separate from one another.,selection,annotated
+17fba530-c42b-4eeb-85dd-16da0bacc49c,"Areas that are not enclosed, such as open floors, covered ways and balconies, should be excluded.",{'ID': '470_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Areas that are not enclosed, such as <e1>open</e1> <e2>floors</e2>, covered ways and balconies, should be excluded.",selection,annotated
+9dd2a0f1-0ff9-4416-8abd-1e6589980ff4_2,,,"If the <e1>primary energy factor</e1> of a mechanical ventilation systems air duct is designed to be greater than <e2>40</e2>, the outdoor air and exhaust air ducts shall be fitted with shutoff dampers that close automatically when the system shuts down.",greater,synthetic
+60024014-cb6a-4a53-9b12-9497e0a1e5e8,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",{'ID': '85_Finnish_Health-IndoorClimateAndVentilation'},"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the <e1>total extract air flow</e1> from these <e2>spaces</e2> does not exceed 10 of the total air flow in the vertical duct.",part-of,annotated
+23db27ac-b594-4b26-883d-922d713d382a,"When installing or renovating thermal elements, the element being installed should be draught-proofed and airleakage gaps should be filled.",{'ID': '161_UK_DocM_V2_AccessAndUseOfBuildings'},"When installing or renovating thermal elements, the element being installed should be draught-proofed and <e1>airleakage gaps</e1> should be <e2>filled</e2>.",necessity,annotated
+99a53f17-48cb-4012-a47b-700761e0983b_7,,,Where a new building which is not a residential building or a mixed-use building has more than <e1>20 litres per second</e1> <e2>driveway</e2> (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,greater,synthetic
+0df5892a-e396-424e-90f1-74f6ccfb9e1a,"A certain proportion of the changing rooms, washing facilities, saunas and swimming pools in a non-residential building shall be suitable for a person with mobility and functional impairment.",{'ID': '61_Finnish_Accessibility'},"A certain proportion of the changing rooms, <e1>washing facilities</e1>, saunas and swimming pools in a <e2>non-residential building</e2> shall be suitable for a person with mobility and functional impairment.",part-of,annotated
+0fdce0b1-7992-401f-aa84-ad7f2acca23d,Cavity walls: the inner block leaf mortar joint should be fully filled and pointed within the cavity.,{'ID': '184_UK_DocL_V1_ConsrvationOfFuelAndPower'},Cavity walls: the inner <e1>block leaf</e1> mortar joint should be fully filled and <e2>pointed within the cavity</e2>.,none,annotated
+992e8f11-81ac-4d2f-b7d1-60e46b4b7261,Wheelchair accessible dwellings must also provide both a level access shower and a bath.,{'ID': '108_UK_DocM_V1_AccessAndUseOfBuildings'},Wheelchair accessible <e1>dwellings</e1> must also provide both a level access shower and a <e2>bath</e2>.,necessity,annotated
+a9cea98b-d439-4930-a991-fc17eee6657c,the location of the electric vehicle charge point or future connection location should be suitable for use by electric vehicles with charging inlets in different places.,{'ID': '102_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},the location of the electric vehicle charge point or <e1>future connection</e1> <e2>location</e2> should be suitable for use by electric vehicles with charging inlets in different places.,part-of,annotated
+d56a51f7-6ec0-457b-a9ed-263fffe3a3e2,"Once open, all doors to accessible entrances should be wide enough to allow unrestricted passage for a variety of users, including wheelchair users, people carrying luggage, people with assistance dogs, and parents with pushchairs and small children.",{'ID': '66_UK_DocM_V2_AccessAndUseOfBuildings'},"Once open, all doors to <e1>accessible</e1> <e2>entrances</e2> should be wide enough to allow unrestricted passage for a variety of users, including wheelchair users, people carrying luggage, people with assistance dogs, and parents with pushchairs and small children.",selection,annotated
+75c60084-6878-472d-8694-e8739e0dd76c_9,,,The <e1>number of storeys</e1> of access routes in assembly areas with a maximum capacity of 60 persons must be at least <e2>50 millimetres</e2>.,greater-equal,synthetic
+54907849-c48f-4267-b5f0-fc7e9279da7c,"For existing dwellings, when carrying out work on an existing system, such as installing or replacing components (e.g. replacing a boiler but retaining the pipework and heat emitters), the energy performance of the new components should be assessed.",{'ID': '409_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For existing <e1>dwellings</e1>, when carrying out work on an existing system, such as installing or replacing components (e.g. replacing a boiler but retaining the pipework and heat emitters), the energy performance of the <e2>new</e2> components should be assessed.",none,annotated
+99a53f17-48cb-4012-a47b-700761e0983b_6,,,Where a new building which is not a residential building or a mixed-use building has more than <e1>half</e1> <e2>insulating material</e2> (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,greater,synthetic
+6c789809-b1b8-429a-8fe2-8ce16f8a4b54,Air flows in the continuous working area of a parking garage for motor vehicles shall be designed so that the instantaneous carbon monoxide concentration does not exceed 7 mg/m3 (6 ppm).,{'ID': '62_Finnish_Health-IndoorClimateAndVentilation'},Air flows in the continuous working area of a <e1>parking garage</e1> for motor vehicles shall be designed so that the <e2>instantaneous carbon monoxide concentration</e2> does not exceed 7 mg/m3 (6 ppm).,none,annotated
+c72a5952-2e0b-4d4a-9185-09e4149b6239,The flooring functioning as waterproofing or waterproofing located underneath the flooring in wet rooms must have a watertight connection with the waterproofing of the wall.,{'ID': '114_Finnish_Health-Humidity'},The <e1>flooring</e1> functioning as waterproofing or waterproofing located underneath the flooring in wet rooms must have a watertight connection with the waterproofing of the <e2>wall</e2>.,none,annotated
+8a692fe7-08ed-4b90-8b13-7ce2e29d37a2,"During this process, the heat pump (along with its accompanying pipework) should be isolated from the ground heat exchanger such that damage to the internal heat exchanger inside the heat pump is avoided.",{'ID': '386_UK_DocL_V1_ConsrvationOfFuelAndPower'},"During this process, the <e1>heat pump</e1> (along with its accompanying pipework) should be <e2>isolated from the ground heat exchanger such that damage to the internal heat exchanger inside the heat pump is avoided</e2>.",necessity,annotated
+ef561e39-db90-462c-8dde-15fbeae954e5_8,,,A cube with <e1>vertical spacing</e1> of no more than <e2>56 metres</e2> may pass between the upper edge of the barrier and the protective part.,less-equal,synthetic
+a894077e-cebf-4559-9254-ce964bc11b0f,Air flow rates for mechanical ventilation in new dwellings must be measured.,{'ID': '182_UK_DocF_V1_Ventilation'},Air flow rates for mechanical ventilation in <e1>new</e1> <e2>dwellings</e2> must be measured.,selection,annotated
+81314489-dcd9-410f-9b15-595b87e7c8f9,"The resilient layer should be timber sheathing at least 9mm thick, expanded metal or a similar resilient material.",{'ID': '14_UK_DocQ_Security_Dwellings'},"The resilient layer should be <e1>timber sheathing</e1> at least 9mm thick, <e2>expanded metal</e2> or a similar resilient material.",none,annotated
+89811586-c819-4eb5-99f5-c4fcefdb9520,Fixed or linked seats must be arranged as rows of seating with an access route on the side of the rows.,{'ID': '107_Finnish_SafetyOfUse'},Fixed or linked <e1>seats</e1> must be arranged as rows of seating with an <e2>access route</e2> on the side of the rows.,necessity,annotated
+fb5d3054-4911-4049-ba09-1c3e80f9c07c_3,,,"The <e1>installation</e1> of steps in uncovered or unheated outdoor staircases must be no less than <e2>two years</e2>, and the riser may be no more than 130 millimetres.",greater-equal,synthetic
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new building as well as in repair and alteration work corresponding to the <e1>construction</e1> of a new building, the premises to be <e2>fitted with a floor drain</e2> shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",none,annotated
+d0b6759e-deec-451d-bd7a-ec65b96048be_5,,,"extract air of <e1>habitable area</e1> <e2>40 degrees Celsius</e2> shall be conducted through individual ducts, or common ducts serving spaces of the same type as regards level of air purity, to the outdoors, into a collection duct installed above the spaces it serves or into an extract air chamber.",equal,synthetic
+0a53e4af-84a7-46aa-b28a-cb1d873c8cae,"The type and quality of public address, hearing enhancement and telephone systems should be chosen carefully to ensure intelligibility.",{'ID': '151_UK_DocM_V2_AccessAndUseOfBuildings'},"The <e1>type and quality</e1> of public address, hearing enhancement and <e2>telephone systems</e2> should be chosen carefully to ensure intelligibility.",selection,annotated
+9ff8b8fd-5361-4c3d-9a7e-7459276c8df7,The dwelling fabric energy efficiency rate must not exceed the individual dwellings target fabric energy efficiency rate.,{'ID': '66_UK_DocL_V1_ConsrvationOfFuelAndPower'},The dwelling fabric energy efficiency rate must not exceed the individual <e1>dwellings</e1> <e2>target fabric energy efficiency rate</e2>.,part-of,annotated
+56b0e4bf-81d7-4ab9-855b-780ef2f0b1d3,"Storage premises with a fire load exceeding 1,200 MJ/m2 are not permitted within the building.",{'ID': '73_Finnish_FireSafety'},"Storage premises with a fire load exceeding <e1>1,200 MJ/m2</e1> are <e2>not permitted within the building</e2>.",none,annotated
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_11,,,"In buildings more than 9 metres and at most <e1>20 millimetres</e1> in <e2>safety features</e2>, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",less-equal,synthetic
+0ea1e862-2434-4fc8-97a2-b076c992ef20_6,,,"The <e1>heat loss</e1> of an exit must be at least <e2>four</e2> and its free height must be at least 2,100 millimetres.",greater-equal,synthetic
+11f2902d-29c2-474e-97d0-628a2a97a666_5,,,"<e1>standards</e1> of over <e2>0.052083333</e2> must be equipped with an appropriate safety barrier, railing or handrail.",greater,synthetic
+fb5d3054-4911-4049-ba09-1c3e80f9c07c,"The tread of steps in uncovered or unheated outdoor staircases must be no less than 390 millimetres, and the riser may be no more than 130 millimetres.",{'ID': '29_Finnish_SafetyOfUse'},"The <e1>tread</e1> of <e2>steps</e2> in uncovered or unheated outdoor staircases must be no less than 390 millimetres, and the riser may be no more than 130 millimetres.",part-of,annotated
+f6add908-4d45-4b3e-83a6-369f6c36c037_0,,,"Door rails, stiles and muntins should be at least <e1>800 millimetres</e1> <e2>fire resistance time</e2>.",greater-equal,synthetic
+74b9ee2c-0192-442d-b5a1-a2974d456429,"The dwelling is wheelchair adaptable such that key parts of the accommodation, including sanitary facilities and kitchens, could be easily altered to meet the needs of a wheelchair user or, where required by a local planning authority, the dwelling is wheelchair accessible.",{'ID': '67_UK_DocM_V1_AccessAndUseOfBuildings'},"The dwelling is wheelchair adaptable such that <e1>key parts of the accommodation</e1>, including sanitary facilities and <e2>kitchens</e2>, could be easily altered to meet the needs of a wheelchair user or, where required by a local planning authority, the dwelling is wheelchair accessible.",selection,annotated
+c47598f9-df79-4d77-aba9-8f380342372f_5,,,extract air of <e1>fire resistance time requirement</e1> <e2>01:08:00</e2> shall be conducted to the outdoors through individual extract air ducts.,equal,synthetic
+389c960b-525d-4f2e-9a2c-1805eb2dc20d,The full area under a stair that forms part of the storage provision should be counted as 1m2.,{'ID': '79_UK_DocM_V1_AccessAndUseOfBuildings'},The full <e1>area</e1> under a stair that forms part of the storage provision should be counted as <e2>1m2</e2>.,equal,annotated
+a387fcb8-ead2-4094-9be9-72d783468b33,"If the area of windows, roof windows, rooflights and doors exceeds 25 of the total floor area of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",{'ID': '422_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If the area of windows, roof windows, rooflights and doors exceeds <e1>25</e1> of the <e2>total floor area</e2> of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",part-of,annotated
+09b2a395-5293-4b7d-82d4-5312482d59e9,"Door entry controls, where provided, are mounted 900-1000mm above finished ground level, and at least 300mm away from any projecting corner.",{'ID': '46_UK_DocM_V1_AccessAndUseOfBuildings'},"Door entry controls, where provided, are mounted <e1>900-1000mm</e1> above finished ground level, and at least 300mm away from any <e2>projecting corner</e2>.",none,annotated
+2238d6ef-421b-4f84-b24d-d46c6ba2afc5,"For example, when a door is open, people with impaired sight should be able to identify the door opening within the wall, as well as the leading edge of the door.",{'ID': '92_UK_DocM_V2_AccessAndUseOfBuildings'},"For example, when a door is open, <e1>people</e1> with impaired sight should be <e2>able to identify the door opening within the wall, as well as the leading edge of the door</e2>.",necessity,annotated
+783c19fa-0ef2-466f-b3e9-d4690e34ac5f,Where a system for onsite electricity generation is installed (a) reasonable provision must be made to ensure that (i) the system and its electrical output are appropriately sized for the site and available infrastructure; (ii) the system has effective controls; and (b) it must be commissioned by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.,{'ID': '214_UK_DocL_V1_ConsrvationOfFuelAndPower'},Where a system for onsite electricity generation is installed (a) reasonable provision must be made to ensure that (i) the system and its electrical output are appropriately sized for the site and available infrastructure; (ii) the system has effective controls; and (b) <e1>it</e1> must be <e2>commissioned</e2> by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.,necessity,annotated
+9d172d30-e92f-4151-865c-d204f217705d,The slope of the wet room floor must allow water to flow into the floor drain.,{'ID': '118_Finnish_Health-Humidity'},The <e1>slope</e1> of the wet room <e2>floor</e2> must allow water to flow into the floor drain.,part-of,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_11,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for <e1>free gap</e1> 1 and <e2>half a metre</e2> if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",equal,synthetic
+a477ee34-044e-443b-a95f-fbb1da913c38,"Changing places toilets, facilities designed for individuals with complex and multiple impairments who may require the assistance of up to two assistants, should be provided in addition to any wheelchair-accessible accommodation in separate-sex toilet washrooms, wheelchair-accessible unisex toileting facilities and baby changing facilities.",{'ID': '160_UK_DocM_V2_AccessAndUseOfBuildings'},"Changing places toilets, <e1>facilities designed for individuals with complex and multiple impairments who may require the assistance of up to two assistants</e1>, should be provided in addition to any wheelchair-accessible <e2>accommodation</e2> in separate-sex toilet washrooms, wheelchair-accessible unisex toileting facilities and baby changing facilities.",necessity,annotated
+bfdf95da-d422-47cd-83d7-a30a4969f2e6,"If the internal ties must be centred on the supporting line, the minimum value of the tie force, 10 kN, will also be applied to internal ties.",{'ID': '180_Finnish_StabilityOfStructures'},"If the internal <e1>ties</e1> must be <e2>centred on the supporting line</e2>, the minimum value of the tie force, 10 kN, will also be applied to internal ties.",necessity,annotated
+f3bd99b4-7ea5-4968-af10-3c133c0b5aa0_0,,,No individual flight has a <e1>away</e1> of more than <e2>900mm</e2>.,less-equal,synthetic
+46f5be2a-1514-420b-bc39-331fc6e0d2df_4,,,"The dwelling primary energy rate, <e1>reference value</e1> and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the target primary energy rate, <e2>domestic hot water circulation heat loss</e2> and target fabric energy efficiency rate, respectively.",less-equal,synthetic
+7db23e3b-7063-47a3-b65e-5d02ad78c922,"In a natural ventilation system, the ventilation valves shall be easy to close.",{'ID': '49_Finnish_Health-IndoorClimateAndVentilation'},"In a natural <e1>ventilation system</e1>, the <e2>ventilation valves</e2> shall be easy to close.",part-of,annotated
+b0e99ac5-9cbc-4beb-b8ff-85383ae70ea8,"The approach route should be safe and convenient, adopt the shallowest gradient that can reasonably be achieved and be step-free, irrespective of the storey on which the dwelling is located.",{'ID': '40_UK_DocM_V1_AccessAndUseOfBuildings'},"The approach route should be <e1>safe</e1> and convenient, adopt the shallowest gradient that can reasonably be achieved and be <e2>step-free</e2>, irrespective of the storey on which the dwelling is located.",none,annotated
+34a524ec-6994-426f-86af-78788fd34a80_3,,,"Between the locking points for the mortice lock and surface-mounted rim lock, the <e1>frequency</e1> should be <e2>2.0 m3/(h m2)</e2>.",equal,synthetic
+81f14fc1-af5d-45e8-8725-94d2510e4701_6,,,"A dwelling that is intended for service housing or supported housing of a person with mobility and functional impairment shall, irrespective of the number of storeys in the building, have a turning space with a <e1>breaking</e1> of at least <e2>23C</e2> in the hallway and kitchen.",greater-equal,synthetic
+fa90c179-d32c-412b-a7d6-a515cc91dbdb,The structure of the exterior wall against the ground must be waterproofed or isolated against water pressure or a structurally managed water removal system allowing the cellar wall to dry in an outward direction must be used to prevent moisture from the surrounding ground and storm water from penetrating the wall structure.,{'ID': '86_Finnish_Health-Humidity'},The <e1>structure</e1> of the exterior wall against the ground must be <e2>waterproofed</e2> or isolated against water pressure or a structurally managed water removal system allowing the cellar wall to dry in an outward direction must be used to prevent moisture from the surrounding ground and storm water from penetrating the wall structure.,necessity,annotated
+7c74b365-6fdd-494d-9675-3ae036c55348,Ladders and other structural elements at emergency exits and service routes must be designed and constructed so that they can also be used in an emergency situation.,{'ID': '82_Finnish_SafetyOfUse'},<e1>Ladders</e1> and other structural elements at emergency exits and <e2>service routes</e2> must be designed and constructed so that they can also be used in an emergency situation.,part-of,annotated
+76bf63bd-30f4-440d-81a0-61ca16170f70,Control should be maximised and heat gain to uninsulated pipes should only be permitted where the proportion of the cooling load relating to distribution pipework is less than 1 of the total load.,{'ID': '177_UK_DocM_V2_AccessAndUseOfBuildings'},Control should be maximised and heat gain to uninsulated pipes should only be permitted where the <e1>proportion of the cooling load relating to distribution pipework</e1> is less than <e2>1</e2> of the total load.,less,annotated
+09b2a395-5293-4b7d-82d4-5312482d59e9_11,,,"Door entry controls, where provided, are mounted 900-1000mm above finished ground level, and at least <e1>180kW</e1> <e2>headroom</e2> from any projecting corner.",greater-equal,synthetic
+6ec243f2-9294-4b7c-89a4-1c46e4a69cc9_2,,,"If site constraints necessitate an <e1>lifting device</e1> of <e2>100 litres</e2> or steeper, an approach incorporating ramped access should be provided.",greater-equal,synthetic
+8e5e9560-4b22-4fe0-ad86-e52b82ffe4d2,"When  calculating  the  energy  consumption  of  a  buildings  cooling  system,  the  energy consumption of cooling energy production and the electrical energy consumption of auxiliary units  shall  be  taken  into  account  where  the  use  of  the  systems  is  required  for  indoor temperature control.",{'ID': '111_Finnish_EnergyEfficiency'},"When calculating the energy consumption of a buildings cooling system, the <e1>energy consumption</e1> of cooling energy production and the electrical energy consumption of auxiliary units shall be <e2>taken into account where the use of the systems is required for indoor temperature control</e2>.",necessity,annotated
+23ff7307-c4ae-4bef-97bf-feb9682d91eb,"If a water pump is used on a closed loop circuit and the motor is rated at more than 750W, then it should be fitted with or controlled by an appropriate variable speed controller on any variable volume system.",{'ID': '290_UK_DocM_V2_AccessAndUseOfBuildings'},"If a <e1>water pump</e1> is used on a closed loop circuit and the <e2>motor</e2> is rated at more than 750W, then it should be fitted with or controlled by an appropriate variable speed controller on any variable volume system.",part-of,annotated
+f162906e-1097-420e-b2a0-dd746d5794c7,"Where controls are external to the heater, the system should be provided with a time switch/programmer and room thermostat, or programmable room thermostat.",{'ID': '265_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where controls are <e1>external to the heater</e1>, the system should be provided with a <e2>time switch/programmer</e2> and room thermostat, or programmable room thermostat.",none,annotated
+bde1697a-20c9-4f15-a63c-5be323a058c1,Any connection of two or more air handling units to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,{'ID': '90_Finnish_Health-IndoorClimateAndVentilation'},Any connection of two or more air handling units to the same duct or chamber shall be <e1>designed</e1> so that the <e2>pressures</e2> of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,selection,annotated
+05fdde92-d8af-42ad-963b-9019c69a8ab3_0,,,"For a timber frame where the intermediate floor structure breaches the external wall insulation, further insulation of the same <e1>condition</e1> as the <e2>gap</e2> used in the external wall should be included within the depth of the intermediate floor structure.",equal,synthetic
+0edb92b7-a2e1-480f-b708-e7e6c9951a79,The foundation drainage water shall flow away from the property in such a way that it does not cause problems to the waste water and storm water systems.,{'ID': '173_Finnish_Health-WaterAndSewerage'},The foundation <e1>drainage water</e1> shall <e2>flow away from the property in such a way that it does not cause problems to the waste water and storm water systems</e2>.,necessity,annotated
+493ec553-7761-4d1e-aa98-05d925ddf955_4,,,The <e1>floor  plate areas</e1> of a horizontal hatch must be at least <e2>2 metres</e2>.,greater-equal,synthetic
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_9,,,"The wall ties should have a <e1>total load</e1> of <e2>0.3</e2> and a vertical spacing of 450mm, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",equal,synthetic
+8151be81-09ad-4dac-b2d2-f0d757915b6c_0,,,"However, when the snow load can occur, the <e1>reverberation time</e1> of the load s should be at least <e2>180kW</e2>.",greater-equal,synthetic
+cd904a0f-c120-4c67-bcff-6fcc77abca62,Any future connection locations should be clearly identified and labelled.,{'ID': '116_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},Any future connection <e1>locations</e1> should be clearly identified and <e2>labelled</e2>.,necessity,annotated
+0a7ff0c7-c5f9-4069-9d7e-2bfd6c4871d3_8,,,The <e1>spread of fire</e1> of the extension does not exceed <e2>25 decibels</e2>.,less-equal,synthetic
+103f99ad-884b-4bae-9f22-ccb1c5bc3d26,"In an open garage of no more than five storeys, the maximum area may be used as the surface area of the storeys, even though the driveways between the various storeys are combined.",{'ID': '110_Finnish_FireSafety'},"In an open garage of no more than five storeys, the <e1>maximum</e1> <e2>area</e2> may be used as the surface area of the storeys, even though the driveways between the various storeys are combined.",selection,annotated
+108b5709-f035-4697-ba25-56edd2ce60fc,"Where permanent or removable seating is provided as part of the design, allowance should be made for disabled people to have a choice of seating location at spectator events.",{'ID': '126_UK_DocM_V2_AccessAndUseOfBuildings'},"Where permanent or removable <e1>seating</e1> is <e2>provided as part of the design</e2>, allowance should be made for disabled people to have a choice of seating location at spectator events.",selection,annotated
+3835aa39-14bc-4c7a-a029-a5ce391bad76,The efficiency of the secondary heating appliance with its appropriate fuel should be used in the calculation of the dwelling primary energy rate and dwelling emission rate.,{'ID': '73_UK_DocL_V1_ConsrvationOfFuelAndPower'},The efficiency of the <e1>secondary</e1> <e2>heating appliance</e2> with its appropriate fuel should be used in the calculation of the dwelling primary energy rate and dwelling emission rate.,selection,annotated
+5afbc8c9-4c2e-4cb8-8945-24e184d161e1,The fan should be set at a speed that will approximately achieve the desired continuous flow rate.,{'ID': '201_UK_DocF_V1_Ventilation'},The <e1>fan</e1> should be set at a <e2>speed</e2> that will approximately achieve the desired continuous flow rate.,necessity,annotated
+b63dcef6-1840-4e9e-ad51-f8fc481fe856,"The wall ties should have a horizontal spacing of 900mm and a vertical spacing of 450mm, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",{'ID': '36_UK_DocA_Structure'},"The wall ties should have a horizontal spacing of 900mm and a vertical spacing of 450mm, or alternatively should be spaced such that the <e1>number of wall ties per square metre</e1> is not less than <e2>2.5 ties/m2</e2>.",greater-equal,annotated
+2319724e-2fd4-463b-bb59-0972073dc55a,"Both before and after a newly constructed dwelling is built, a notice must be given to the building control body of the calculations.",{'ID': '44_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Both before and after a newly constructed <e1>dwelling</e1> is <e2>built</e2>, a notice must be given to the building control body of the calculations.",selection,annotated
+536b172d-ccd1-479a-8136-6ee05db0f264,"Where pipework is above ground, the performance of the pipe insulation should be at least as high as the insulating performance of pipework in the buried part of the system.",{'ID': '205_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where pipework is above ground, the <e1>performance</e1> of the pipe <e2>insulation</e2> should be at least as high as the insulating performance of pipework in the buried part of the system.",part-of,annotated
+1fc9255c-929e-4052-aaec-e3ffede5a62e,"For large or complex projects, a commissioning manager should be appointed.",{'ID': '374_UK_DocM_V2_AccessAndUseOfBuildings'},"For large or <e1>complex</e1> <e2>projects</e2>, a commissioning manager should be appointed.",selection,annotated
+55d84237-8fad-4bd7-b67d-0745b9cc1e31,"The doors of exits, and of areas leading to them, must be easy to open in an emergency.",{'ID': '222_Finnish_FireSafety'},"The doors of <e1>exits</e1>, and of areas <e2>leading to them</e2>, must be easy to open in an emergency.",none,annotated
+f505cec8-d1a6-41ae-b2ba-68ac19f64be2,"If other performance (e.g. wind load, safety, security or acoustic attenuation) requires thicker glass to be used, an equivalent window unit with standard thickness glazing should be shown to meet the required standard.",{'ID': '137_UK_DocM_V2_AccessAndUseOfBuildings'},"If other performance (e.g. wind load, safety, security or acoustic attenuation) <e1>requires thicker glass</e1> to be used, an equivalent window unit with <e2>standard thickness</e2> glazing should be shown to meet the required standard.",none,annotated
+302c413e-fefd-47f1-914f-0dc787e4a761_11,,,"Where <e1>air distribution</e1> on surfaces is greater than <e2>25W/m2</e2>, a difference in light reflectance value should be a minimum of 20 points.",greater,synthetic
+c7035b48-7244-40a9-a70e-1d244caf72ac,"The same approved calculation tool must be used to calculate the target primary energy rate, target emission rate and target fabric energy efficiency rate and the dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate.",{'ID': '56_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The same approved calculation tool must be <e1>used to calculate</e1> the target primary energy rate, target emission rate and <e2>target fabric energy efficiency rate</e2> and the dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate.",selection,annotated
+536b172d-ccd1-479a-8136-6ee05db0f264_1,,,"Where pipework is above ground, the performance of the pipe <e1>lifting device</e1> should be at least as high as the <e2>high</e2> of pipework in the buried part of the system.",greater-equal,synthetic
+082c7ed9-3579-48c2-a0d2-076f1edd647c,"Each of the two sections of the centrally hinged window should be assessed as a single side, bottom or top hung window.",{'ID': '112_UK_DocO_Overheating'},"Each of the <e1>two</e1> <e2>sections</e2> of the centrally hinged window should be assessed as a single side, bottom or top hung window.",equal,annotated
+40b40b1b-d1b1-49d8-b9b7-13c5845a169d_5,,,The structure of the control appliance of the plumbing fixture shall be such that its <e1>insulating performance</e1> does not arise above <e2>adequate means</e2>.,less-equal,synthetic
+6187cad8-0d6d-4154-b98b-7285b36fea8d,Continuously running fans should be set up to operate without occupant intervention but may have manual or automatic controls for selecting the high rate of operation.,{'ID': '65_UK_DocF_V1_Ventilation'},Continuously running fans should be set up to operate without occupant intervention but may have manual or <e1>automatic</e1> <e2>controls</e2> for selecting the high rate of operation.,selection,annotated
+76bf63bd-30f4-440d-81a0-61ca16170f70_11,,,Control should be maximised and heat gain to uninsulated pipes should only be permitted where the <e1>ventilation provision</e1> is less than <e2>two years</e2> of the total load.,less,synthetic
+4a82f789-a98a-4379-9b81-2a20cfba6c87_6,,,"If the internal ties must be centred on the supporting line, the minimum value of the <e1>axle group load</e1>, <e2>10m</e2>, will also be applied to internal ties.",greater-equal,synthetic
+e4fb8d18-8dbc-4351-a2df-d87f880f476a_8,,,The <e1>step</e1> for balconies is <e2>0.7 metres</e2> that of the load-bearing structures of the storey.,equal,synthetic
+ef4f54b6-1099-4404-9fa2-d0c0d5e55543_4,,,The <e1>indoor units</e1> must not exceed the individual dwellings <e2>differences</e2>.,less-equal,synthetic
+9027959e-efc1-4d32-acbe-e0775d40f001_10,,,"The morticed bolts should have a minimum <e1>water temperature</e1> of <e2>0.15</e2>, should be at least 100mm from the top and bottom corners of the door, and should avoid any door construction joints.",greater-equal,synthetic
+d504fd87-d13d-4936-9d7a-71d17954760d_5,,,The <e1>average carbon monoxide concentration</e1> of the steps in an exit may be no more than <e2>600 millimetres</e2>.,less-equal,synthetic
+d925c189-860a-4fcb-ae88-d1cf8cc14fb8_2,,,"The tread of steps in covered or heated outdoor staircases must be no less than 300 millimetres, and the <e1>supports</e1> may be no more than <e2>certain proportion</e2>.",less-equal,synthetic
+78d904cd-b605-43a6-b3a4-34c22f557123,"Instead, the dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate should be calculated as if the area covered by the pool were replaced with the equivalent area of floor with the same U-value as the pool surround.",{'ID': '84_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Instead, the dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate should be calculated as if the <e1>area</e1> covered by the pool were <e2>replaced with the equivalent area of floor with the same U-value as the pool surround</e2>.",selection,annotated
+e3b85ad6-6132-40d7-86f8-3cc5d44eb12c_4,,,<e1>ten millimetres</e1> <e2>Grommets</e2> should be close to an accessible bathroom suitable for a wheelchair user.,equal,synthetic
+86365504-9029-4805-a93b-4256849b8e3a,Duct connections should be both mechanically secured and adequately sealed to prevent leaks.,{'ID': '116_UK_DocF_V1_Ventilation'},Duct <e1>connections</e1> should be both mechanically secured and <e2>adequately sealed to prevent leaks</e2>.,necessity,annotated
+86350df0-a40e-412b-a301-004524d56736_2,,,"For wet heating systems in new dwellings with a <e1>part</e1> of <e2>half a metre</e2> or greater, a minimum of two independently controlled heating circuits should be provided.",greater-equal,synthetic
+8efb6108-e49e-4d64-a1e4-22e3f9128b17_4,,,"When calculating the reference heat loss of a building, the value of <e1>10m</e1> shall be used as the <e2>number</e2> for the air leakage rate figure for the building envelope.",equal,synthetic
+8cef7dc5-2d76-4dd8-80c5-6861b11a8f6f_5,,,"Where the work concerns a building containing more than <e1>900 millimetres</e1> <e2>controls</e2>, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",greater-equal,synthetic
+9415ae4b-7a74-4c70-a245-e4381c6d71bf,"At gables and party walls, insulation should extend to the wall; if the space between the wall and joist is less than 100mm, perimeter insulation may be required.",{'ID': '170_UK_DocL_V1_ConsrvationOfFuelAndPower'},"At gables and party walls, <e1>insulation</e1> should <e2>extend to the wall</e2>; if the space between the wall and joist is less than 100mm, perimeter insulation may be required.",necessity,annotated
+bfdf95da-d422-47cd-83d7-a30a4969f2e6,"If the internal ties must be centred on the supporting line, the minimum value of the tie force, 10 kN, will also be applied to internal ties.",{'ID': '180_Finnish_StabilityOfStructures'},"If the internal ties must be centred on the supporting line, the minimum value of the <e1>tie force</e1>, 10 kN, will also be applied to internal <e2>ties</e2>.",part-of,annotated
+a86b58e8-046f-44b7-8e1b-00c876c8c647_3,,,"Parapets in <e1>energy efficiency measures</e1> A to <e2>300mm</e2> and panel parts of walls acting as parapets, as well as their fasteners, shall be designed to the concentrated load Qk = 0.3 kN acting on a random spot.",less-equal,synthetic
+dcc583b1-8c4c-42cf-a1ed-e8907de56254_2,,,"The <e1>travel distance</e1> of the indoor steps of other spaces intended for everyday use may be no more than <e2>4</e2>, and the tread must be no less than 270 millimetres.",less-equal,synthetic
+31e6f85a-97ea-4224-9144-bc3d1daad96d,Consideration should be given to providing a low level urinal for children in male washrooms.,{'ID': '174_UK_DocM_V2_AccessAndUseOfBuildings'},Consideration should be given to providing a low level <e1>urinal</e1> <e2>for children</e2> in male washrooms.,selection,annotated
+0a7ff0c7-c5f9-4069-9d7e-2bfd6c4871d3_5,,,The <e1>room temperature</e1> of the extension does not exceed <e2>off</e2>.,less-equal,synthetic
+203faa23-7b71-47c9-a6e5-2333ac45389e_3,,,"The <e1>U-value</e1> of the indoor steps of dwelling units and living quarters may be no more than <e2>220 millimetres</e2>, and the tread must be no less than 250 millimetres.",less-equal,synthetic
+81314489-dcd9-410f-9b15-595b87e7c8f9,"The resilient layer should be timber sheathing at least 9mm thick, expanded metal or a similar resilient material.",{'ID': '14_UK_DocQ_Security_Dwellings'},"The <e1>resilient layer</e1> should be timber sheathing at least 9mm <e2>thick</e2>, expanded metal or a similar resilient material.",none,annotated
+8e8f4fb5-00b5-404f-89df-a07287984748,"In buildings with a total useful floor area greater than 1000m2, automatic meter reading and data collection facilities should be installed.",{'ID': '229_UK_DocM_V2_AccessAndUseOfBuildings'},"In buildings with a <e1>total useful floor area</e1> greater than <e2>1000m2</e2>, automatic meter reading and data collection facilities should be installed.",greater,annotated
+6c789809-b1b8-429a-8fe2-8ce16f8a4b54_7,,,Air flows in the continuous working area of a parking garage for motor vehicles shall be designed so that the <e1>minimum value</e1> does not exceed <e2>4</e2>.,less-equal,synthetic
+2de867fe-80e7-4617-ad18-36225dd45ab1,Hinged or pivot windows with an opening angle of less than 15 degrees are not suitable for purge ventilation.,{'ID': '53_UK_DocF_V1_Ventilation'},Hinged or pivot <e1>windows</e1> with an <e2>opening angle</e2> of less than 15 degrees are not suitable for purge ventilation.,part-of,annotated
+baee716c-b8c2-4500-b4de-63fa11f007b1_2,,,A minimum of <e1>30% load</e1> in five of the remaining <e2>Sewers</e2> must have access to cable routes.,greater-equal,synthetic
+aa41a5d4-c0b1-4da7-84a0-5c2e2738654f_5,,,The total number of ventilators installed in the dwellings habitable rooms and kitchens should be at least the following: Five ventilators if the dwelling has more than <e1>55</e1> <e2>Door</e2>.,greater,synthetic
+20518e80-6f7e-457f-8c5a-59fa4c0eb324_9,,,"When calculating the heat loss for a buildings design solution, the <e1>slope</e1> shall be used as the value of the <e2>feasibility of installing high-efficiency alternative systems</e2> for the building envelope.",equal,synthetic
+6c789809-b1b8-429a-8fe2-8ce16f8a4b54,Air flows in the continuous working area of a parking garage for motor vehicles shall be designed so that the instantaneous carbon monoxide concentration does not exceed 7 mg/m3 (6 ppm).,{'ID': '62_Finnish_Health-IndoorClimateAndVentilation'},Air flows in the continuous working area of a <e1>parking garage</e1> <e2>for motor vehicles</e2> shall be designed so that the instantaneous carbon monoxide concentration does not exceed 7 mg/m3 (6 ppm).,selection,annotated
+f7f1a609-ae35-4544-9b38-e471d7a00666,"In order to enhance the efficiency of firefighting and rescue operations, means of smoke extraction shall be designed and constructed in the building so that smoke can be extracted from the different premises in the building.",{'ID': '249_Finnish_FireSafety'},"In order to enhance the efficiency of firefighting and rescue operations, <e1>means</e1> of smoke extraction shall be designed and constructed in the <e2>building</e2> so that smoke can be extracted from the different premises in the building.",part-of,annotated
+a235c68f-ae44-4770-b005-4e9d7b659eb7_1,,,All cavity walls should have leaves at least <e1>4</e1> <e2>steps</e2> and cavities at least 50mm wide.,greater-equal,synthetic
+8fcdc238-3c30-4659-9303-1b126a39b2cd_2,,,The design solar load should be <e1>danger of collision</e1> by at least <e2>three metres</e2>.,greater-equal,synthetic
+2b60007d-59a3-4a18-a184-89e76ee17454,Masonry construction: external or cavity wall insulation should extend below the damp-proof course (where applicable) and be at least the equivalent of one full block height (215mm) below the underside of the floor structure/slab and beyond the depth of the floor insulation.,{'ID': '161_UK_DocL_V1_ConsrvationOfFuelAndPower'},Masonry <e1>construction</e1>: <e2>external</e2> or cavity wall insulation should extend below the damp-proof course (where applicable) and be at least the equivalent of one full block height (215mm) below the underside of the floor structure/slab and beyond the depth of the floor insulation.,none,annotated
+415aa97a-1b29-4d68-b1f1-e7d29a5ed7d6,Rigid connectors and jubilee clips should be used for flexible ducting to ensure a good seal.,{'ID': '117_UK_DocF_V1_Ventilation'},Rigid connectors and <e1>jubilee clips</e1> should be <e2>used for flexible ducting to ensure a good seal</e2>.,necessity,annotated
+636bce88-fd3b-4e5a-9f6a-4aa0d3d1bfa4_7,,,"Where a new building contains more than <e1>10m</e1> <e2>vapour barriers</e2>, a common access point for a gigabit-capable public electronic communications network is required as a part of the buildings gigabit-ready physical infrastructure.",greater,synthetic
+2afa8bba-b5ad-4e12-bc27-4beea3fd09b2_6,,,The normal relationship between the dimensions of the rise and going is: <e1>100</e1> equals <e2>three</e2>.,equal,synthetic
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_5,,,Skirtings totalling up to 50mm total thickness and shallow projecting <e1>toilets</e1> or casings above <e2>EI 15</e2> may be discounted when measuring clear width.,greater,synthetic
+77be05f2-cd8c-4d35-85e4-6637b999d8e7_2,,,The <e1>number of storeys</e1> of the consequential improvement works should not be less than <e2>3m</e2> of the value of the principal works.,greater-equal,synthetic
+eefe1191-2903-4fb8-9138-6471e09fb67d_5,,,The <e1>CO2</e1> exceeds <e2>850 millimetres</e2> at 11pm.,greater,synthetic
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9,"In buildings more than 9 metres and at most 28 metres in height, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",{'ID': '126_Finnish_SafetyOfUse'},"In buildings more than 9 metres and at most 28 metres in height, the attic and <e1>roof</e1> must be accessible via the interior and exterior of the building; in <e2>buildings</e2> more than 28 metres in height, these must be accessible via the interior.",part-of,annotated
+83344b26-7cf0-452a-9dac-c0288c46393d,"The non-primary doors for entering a dwelling (for example, back door or garage inter-connecting doors) should be fitted with a multipoint locking system that meets the requirements of: PAS 3621 (key locking on both sides), or PAS 8621 (non-key locking on the internal face), or PAS 10621 (non-key locking on the internal face, but with an external locking override facility).",{'ID': '37_UK_DocQ_Security_Dwellings'},"The non-primary doors for entering a dwelling (for example, back door or garage inter-connecting doors) should be fitted with a <e1>multipoint locking system</e1> that meets the requirements of: PAS 3621 (key locking on both sides), or <e2>PAS 8621 (non-key locking on the internal face)</e2>, or PAS 10621 (non-key locking on the internal face, but with an external locking override facility).",selection,annotated
+ddd6ec57-ed54-4a8a-abaf-4b1efc287dde,The flushing shall be carried out with household water to remove any dirt and debris from the pipe network.,{'ID': '111_Finnish_Health-WaterAndSewerage'},The <e1>flushing</e1> shall be carried out with household water to <e2>remove any dirt and debris from the pipe network</e2>.,none,annotated
+0da52584-1b37-48b5-840f-3795ae695275_0,,,the minimum clear dimensions of the platform are: 1100mm wide and <e1>0.052083333</e1> <e2>thick</e2> where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+6d5428cc-90c2-477e-b20e-978a6d1cd403,Edge columns and walls shall be tied to every floor and roof.,{'ID': '186_Finnish_StabilityOfStructures'},Edge <e1>columns</e1> and walls shall be <e2>tied to every floor and roof</e2>.,necessity,annotated
+203faa23-7b71-47c9-a6e5-2333ac45389e_8,,,"The <e1>heat</e1> of the indoor steps of dwelling units and living quarters may be no more than <e2>10 kN</e2>, and the tread must be no less than 250 millimetres.",less-equal,synthetic
+c2e0629d-350b-45b8-9e9e-d58be1780f12_8,,,"If the <e1>heating and cooling systems</e1> has no <e2>Water pipes</e2>, it should be treated as having one bedroom when calculating the ventilation required for the purposes of meeting the ventilation standards.",not-part-of,synthetic
+0ea1e862-2434-4fc8-97a2-b076c992ef20_11,,,"The <e1>reference value</e1> of an exit must be at least <e2>0.9 metres</e2> and its free height must be at least 2,100 millimetres.",greater-equal,synthetic
+05864826-21ef-4ae7-9af8-2aaeffc7267a_1,,,Modular and portable buildings with a planned <e1>equivalent area</e1> of more than <e2>90mm</e2> but with an intended time of use in a single location of less than two years should be shown to comply with the energy efficiency requirements.,greater,synthetic
+e32bbb47-c826-40c1-8ea4-8c32353d3fd2_7,,,There shall be <e1>150m2</e1> of <e2>separator or treatment device</e2> provided for people in the building.,equal,synthetic
+4fc3b5b1-a838-4429-b385-d8e80e6633eb,"In the absence of relevant harmonised European Standards, products with a travel exceeding 3m must have a product certificate issued by a Notified Body.",{'ID': '117_UK_DocM_V2_AccessAndUseOfBuildings'},"In the absence of relevant harmonised European Standards, <e1>products</e1> with a travel exceeding 3m must have a <e2>product certificate</e2> issued by a Notified Body.",necessity,annotated
+7d877df3-9aa7-4dff-a64d-5356a66c944d,"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a width exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",{'ID': '59_Finnish_SafetyOfUse'},"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or <e1>ramps</e1> that have a width exceeding 2.4 metres and are <e2>located in assembly areas</e2>, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",selection,annotated
+4a82f789-a98a-4379-9b81-2a20cfba6c87,"If the internal ties must be centred on the supporting line, the minimum value of the tie force, 70 kN, will also be applied to internal ties.",{'ID': '179_Finnish_StabilityOfStructures'},"If the internal ties must be centred on the supporting line, the minimum value of the tie force, <e1>70 kN</e1>, will also be applied to <e2>internal</e2> ties.",none,annotated
+c0a6d35c-cc20-428b-941d-c3e3e6365c74,"In a tier that is uninterrupted by cross-gangways, and where the pitch exceeds 25, use a maximum number of steps of 40.",{'ID': '25_UK_DocK_ProtectionFromFalling'},"In a tier that is uninterrupted by cross-gangways, and where the pitch exceeds 25, use a <e1>maximum</e1> <e2>number</e2> of steps of 40.",selection,annotated
+8e8f4fb5-00b5-404f-89df-a07287984748_1,,,"In buildings with a <e1>habitable area</e1> greater than <e2>20 degrees Celsius</e2>, automatic meter reading and data collection facilities should be installed.",greater,synthetic
+81f14fc1-af5d-45e8-8725-94d2510e4701,"A dwelling that is intended for service housing or supported housing of a person with mobility and functional impairment shall, irrespective of the number of storeys in the building, have a turning  space  with  a  diameter  of  at  least  1,500  millimetres  in  the  hallway  and  kitchen.",{'ID': '29_Finnish_Accessibility'},"A dwelling that is intended for service housing or supported housing of a person with mobility and functional impairment shall, irrespective of the number of storeys in the building, have a <e1>turning space</e1> with a diameter of at least 1,500 millimetres in the hallway and <e2>kitchen</e2>.",part-of,annotated
+c0a6d35c-cc20-428b-941d-c3e3e6365c74_9,,,"In a tier that is uninterrupted by cross-gangways, and where the pitch exceeds 25, use a <e1>remains fully open</e1> number of steps of <e2>390 millimetres</e2>.",equal,synthetic
+cc72106e-9e7f-47cf-8a95-0173a8305dad,"In a new building, the crawl space height must be 0.8 metres on average at the minimum.",{'ID': '83_Finnish_Health-Humidity'},"In a <e1>new</e1> <e2>building</e2>, the crawl space height must be 0.8 metres on average at the minimum.",selection,annotated
+835d8fad-7a27-4299-aa38-a5b1771a6779,"In large building complexes, such as retail parks and large sports centres, there should be one wheelchair-accessible unisex toilet capable of including an adult changing table.",{'ID': '178_UK_DocM_V2_AccessAndUseOfBuildings'},"In <e1>large</e1> building complexes, such as retail parks and large sports centres, there should be one wheelchair-accessible unisex toilet <e2>capable of including an adult changing table</e2>.",none,annotated
+34a524ec-6994-426f-86af-78788fd34a80,"Between the locking points for the mortice lock and surface-mounted rim lock, the distance should be 400-600mm.",{'ID': '36_UK_DocQ_Security_Dwellings'},"Between the locking points for the mortice lock and surface-mounted rim lock, the <e1>distance</e1> should be <e2>400-600mm</e2>.",equal,annotated
+43e26628-8b62-4cc6-91e2-284335df1564,"In  rooms  used  for  sleeping  or  rest,  the  one-hour  A-weighted  equivalent continuous sound level of impulsive, narrow-band or low-frequency noise may not exceed 25 decibels.",{'ID': '17_Finnish_AcousticEnvironment'},"In <e1>rooms</e1> used for sleeping or rest, the <e2>one-hour A-weighted equivalent continuous sound level of impulsive, narrow-band or low-frequency noise</e2> may not exceed 25 decibels.",part-of,annotated
+39a37d5e-3361-43b9-a209-e5cd45918abc,"For mixed-use buildings which have parking spaces within a covered car park, any requirements to install electric vehicle charge points or cable routes must first be applied to those parking spaces outside the covered car park.",{'ID': '95_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"For mixed-use buildings which have <e1>parking spaces</e1> within a covered <e2>car park</e2>, any requirements to install electric vehicle charge points or cable routes must first be applied to those parking spaces outside the covered car park.",part-of,annotated
+fb1da22f-8ddb-4399-b441-64dca68da9af,"If a lift or other device for moving between levels is installed in the exit of an existing building, the dwellings exit may be no less than 850 millimetres wide.",{'ID': '218_Finnish_FireSafety'},"If a lift or other device for <e1>moving between levels</e1> is installed in the exit of an existing building, the dwellings <e2>exit</e2> may be no less than 850 millimetres wide.",none,annotated
+389c960b-525d-4f2e-9a2c-1805eb2dc20d_5,,,The full <e1>indoor units</e1> under a stair that forms part of the storage provision should be counted as <e2>25W/m2</e2>.,equal,synthetic
+6ec243f2-9294-4b7c-89a4-1c46e4a69cc9_9,,,"If site constraints necessitate an <e1>casings</e1> of <e2>0.2</e2> or steeper, an approach incorporating ramped access should be provided.",greater-equal,synthetic
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_1,,,"If the air flows of <e1>primary energy content</e1> 1 and <e2>0.3</e2> are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+9fd15b82-fc32-4364-8724-f1ef14f0c047,The cooker hood should span at least the full width of the cooker.,{'ID': '36_UK_DocF_V1_Ventilation'},The cooker hood should span at least the <e1>full width</e1> of the <e2>cooker</e2>.,part-of,annotated
+e874f337-2067-4e77-ad32-c3b857f40e7a_7,,,"If the <e1>service</e1> exceeds <e2>eight per cent</e2>, the total minimum width of the exits shall be calculated by increasing the original 1,200 millimetres by 400 millimetres for each additional group of 60 people.",greater,synthetic
+fb1da22f-8ddb-4399-b441-64dca68da9af,"If a lift or other device for moving between levels is installed in the exit of an existing building, the dwellings exit may be no less than 850 millimetres wide.",{'ID': '218_Finnish_FireSafety'},"If a lift or other device for moving between levels is installed in the exit of an existing <e1>building</e1>, the dwellings exit may be no less than <e2>850 millimetres</e2> wide.",none,annotated
+11f2902d-29c2-474e-97d0-628a2a97a666_2,,,"<e1>total extract air flow</e1> of over <e2>eight per cent</e2> must be equipped with an appropriate safety barrier, railing or handrail.",greater,synthetic
+d3fc8c9b-c23a-4188-8723-369caa90453c,"The reference value for a building's total combined window area is 15 of the sum total of the floor  plate areas  of  the  buildings  storeys that  are  fully  or in  part  above  the  ground  but, however, at most 50 of the building's facade area.",{'ID': '124_Finnish_EnergyEfficiency'},"The reference value for a building's total combined window area is <e1>15</e1> of the sum total of the floor plate areas of the buildings storeys that are fully or in part above the ground but, however, at most 50 of the building's <e2>facade area</e2>.",none,annotated
+5f675f4f-74de-4d0f-ae92-c3500d2d952e,The actual equivalent area and location of installed background ventilators should be recorded.,{'ID': '189_UK_DocF_V1_Ventilation'},The actual equivalent area and <e1>location</e1> of installed background ventilators should be <e2>recorded</e2>.,necessity,annotated
+302c413e-fefd-47f1-914f-0dc787e4a761_3,,,"Where <e1>load</e1> on surfaces is greater than <e2>230mm</e2>, a difference in light reflectance value should be a minimum of 20 points.",greater,synthetic
+986f7853-4975-4ecd-8f10-a75d818eb44a,"Fully insulated and continuous cavity closers should be used, installed tight to the insulation and cavity apertures.",{'ID': '140_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Fully insulated and <e1>continuous</e1> cavity closers should be <e2>used</e2>, installed tight to the insulation and cavity apertures.",none,annotated
+aa41a5d4-c0b1-4da7-84a0-5c2e2738654f_1,,,The total number of ventilators installed in the dwellings habitable rooms and kitchens should be at least the following: Five ventilators if the dwelling has more than <e1>1400mm</e1> <e2>circulation  piping</e2>.,greater,synthetic
+8efb6108-e49e-4d64-a1e4-22e3f9128b17_10,,,"When calculating the reference heat loss of a building, the value of <e1>(16.66 8.33 V0.4)/(1000 24)</e1> shall be used as the <e2>performance standards</e2> for the air leakage rate figure for the building envelope.",equal,synthetic
+6a41a473-bd3c-4e38-a093-094b3fdae388_1,,,At least one in every <e1>30m2</e1> remaining <e2>hotels</e2> must be provided with cable routes.,equal,synthetic
+a5e9c36f-358f-4375-943c-6d5b89c82647,"Any abrupt level differences of over 0.7 metres and any precipices located in the vicinity of common play and recreation areas associated with buildings with more than two dwellings must be indicated by appropriate barriers or suitable planted areas, or outfitted with a base that cushions any fall.",{'ID': '92_Finnish_SafetyOfUse'},"Any abrupt <e1>level differences</e1> of over 0.7 metres and any precipices located in the vicinity of common play and recreation areas associated with <e2>buildings</e2> with more than two dwellings must be indicated by appropriate barriers or suitable planted areas, or outfitted with a base that cushions any fall.",none,annotated
+2de867fe-80e7-4617-ad18-36225dd45ab1_1,,,Hinged or pivot windows with an <e1>height</e1> of less than <e2>8 per cent (1:12.5)</e2> are not suitable for purge ventilation.,less,synthetic
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_11,,,Skirtings totalling up to <e1>15 degrees</e1> <e2>shallow projecting</e2> and shallow projecting ducts or casings above 1800mm may be discounted when measuring clear width.,less-equal,synthetic
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_7,,,"In buildings more than 9 metres and at most 28 metres in height, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than <e1>EI 15</e1> in <e2>intended time of use</e2>, these must be accessible via the interior.",greater,synthetic
+d796dece-45f6-4527-a151-c59b007e9028,"A safe and marked access route must be reserved for pedestrians in connection with vehicle traffic and goods transport routes, doors and gates in the yards of buildings other than single-family houses, if pedestrian traffic through them is necessary.",{'ID': '132_Finnish_SafetyOfUse'},"A <e1>safe</e1> and marked <e2>access route</e2> must be reserved for pedestrians in connection with vehicle traffic and goods transport routes, doors and gates in the yards of buildings other than single-family houses, if pedestrian traffic through them is necessary.",selection,annotated
+e320322e-3aee-4167-ad19-a6c6cc41f597,The water system shall incorporate: 1) a pressure gauge; 2) thermometers in the water pipe of mixed domestic hot water from the water heater and in the domestic hot water ring duct to measure the temperature of return water; 3) throttling valves.,{'ID': '97_Finnish_Health-WaterAndSewerage'},The water system shall incorporate: 1) a pressure gauge; 2) thermometers in the water pipe of mixed domestic hot water from the water heater and in the <e1>domestic hot water</e1> <e2>ring duct</e2> to measure the temperature of return water; 3) throttling valves.,selection,annotated
+2fad9e0f-fa0d-4a6b-9c63-152ef8828c4d,An upstand built on site should not exceed a U-value of 0.35W/(m2K).,{'ID': '115_UK_DocL_V1_ConsrvationOfFuelAndPower'},An upstand <e1>built on site</e1> should not exceed a <e2>U-value</e2> of 0.35W/(m2K).,part-of,annotated
+3153d771-404e-4a54-ac05-ed1b75e37506_8,,,"Gangways should not be less than 1100mm <e1>total capital cost</e1> unless used by not more than 50 persons, in which case gangways should be a minimum of <e2>1000m2</e2>.",greater-equal,synthetic
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_11,,,"The free opening of the vertical hatch or window of an emergency exit must be at least <e1>220 millimetres</e1> in <e2>sum total</e2> and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",greater-equal,synthetic
+2a256a9c-0b8a-4acf-87e1-86a5857f36a3,"Where a driveway forms all, or part of, the approach route, an additional allowance of at least 900mm wide should be provided so that a wheelchair user can pass a parked car.",{'ID': '17_UK_DocM_V1_AccessAndUseOfBuildings'},"Where a driveway forms all, or part of, the approach route, an <e1>additional allowance</e1> of at least <e2>900mm</e2> wide should be provided so that a wheelchair user can pass a parked car.",greater-equal,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",{'ID': '85_Finnish_Health-IndoorClimateAndVentilation'},"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the total extract air flow from these spaces does not exceed <e1>10</e1> of the <e2>total air flow</e2> in the vertical duct.",part-of,annotated
+825053cb-af5d-43a9-b59b-e2a5ae78ea73_6,,,The <e1>cross fall</e1> of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the <e2>air leakage rate figure</e2> of dwellings in the residential building; b. the number of associated parking spaces.,greater,synthetic
+2de867fe-80e7-4617-ad18-36225dd45ab1,Hinged or pivot windows with an opening angle of less than 15 degrees are not suitable for purge ventilation.,{'ID': '53_UK_DocF_V1_Ventilation'},Hinged or pivot <e1>windows</e1> with an opening angle of less than 15 degrees are <e2>not suitable for purge ventilation</e2>.,necessity,annotated
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_7,,,Skirtings totalling up to 50mm total thickness and shallow projecting <e1>Ramps</e1> or casings above <e2>(16.66 8.33 V0.4)/(1000 24)</e2> may be discounted when measuring clear width.,greater,synthetic
+239bd568-c5f2-4ab5-955c-f2d8d86b7b7f,"Where closing devices are needed for fire control, electrically powered hold-open devices or swing-free closing devices should be used as appropriate.",{'ID': '90_UK_DocM_V2_AccessAndUseOfBuildings'},"Where closing devices are <e1>needed for fire control</e1>, electrically powered hold-open devices or swing-free <e2>closing devices</e2> should be used as appropriate.",none,annotated
+d3e7a947-536e-4a49-9823-e27fc0f68b27_6,,,<e1>surfaces</e1> of landings to be at least equal to the <e2>total useful floor area</e2> of the ramp.,greater-equal,synthetic
+f420ae57-5656-4558-b1a3-1079e46bf6cc_4,,,"In the case of the storey-level door of a dwelling, or if the <e1>performance standards</e1> through the door exceeds <e2>7 mg/m3 (6 ppm)</e2>, doors must open in the direction of the exit.",greater,synthetic
+83ff563b-077a-4849-b526-382fbb012647,The breaking of a glass structure or other light-permeable structure of a building must not cause a danger of falling or a danger of injury from fragments falling onto persons below.,{'ID': '67_Finnish_SafetyOfUse'},The breaking of a glass structure or other <e1>light-permeable structure</e1> of a <e2>building</e2> must not cause a danger of falling or a danger of injury from fragments falling onto persons below.,part-of,annotated
+f7935bb4-9e5f-4e91-bbf1-54e45c1ef24c_11,,,A building with a <e1>fittings</e1> exceeding <e2>32mm</e2> must be equipped with anchoring structures for safety lines.,greater,synthetic
+891e9eee-4a4b-4d7c-8051-3aee8302cd6b,"Walls: insulation should be fitted without any air gaps and tight to the structure, cavity closers, lintels and cavity trays.",{'ID': '141_UK_DocL_V1_ConsrvationOfFuelAndPower'},"<e1>Walls</e1>: <e2>insulation</e2> should be fitted without any air gaps and tight to the structure, cavity closers, lintels and cavity trays.",part-of,annotated
+3835aa39-14bc-4c7a-a029-a5ce391bad76,The efficiency of the secondary heating appliance with its appropriate fuel should be used in the calculation of the dwelling primary energy rate and dwelling emission rate.,{'ID': '73_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>efficiency</e1> of the secondary heating appliance with its appropriate fuel should be <e2>used in the calculation of the dwelling primary energy rate and dwelling emission rate</e2>.,necessity,annotated
+0f67dad7-6df9-444b-8e72-f447668e3fde_4,,,"Where sanitary facilities are wheelchair accessible, WC pans should be a minimum of <e1>100 millimetres</e1> <e2>total supply air flow</e2>.",greater-equal,synthetic
+079db365-cfed-474e-9329-25349ac0db4a,"In connection with the door of an outside space of an individual dwelling the level difference outside the door may be more than 20 millimetres if the level difference can, with reasonable effort, be eliminated with equipment in the outdoor space.",{'ID': '21_Finnish_Accessibility'},"In connection with the door of an <e1>outside space</e1> of an individual <e2>dwelling</e2> the level difference outside the door may be more than 20 millimetres if the level difference can, with reasonable effort, be eliminated with equipment in the outdoor space.",part-of,annotated
+3c28dbd6-8a3d-4ede-ae08-89e4b5d69d60_3,,,The approach route is a minimum of 900mm wide with a maximum <e1>stairs</e1> of <e2>two</e2>.,less-equal,synthetic
+2a256a9c-0b8a-4acf-87e1-86a5857f36a3,"Where a driveway forms all, or part of, the approach route, an additional allowance of at least 900mm wide should be provided so that a wheelchair user can pass a parked car.",{'ID': '17_UK_DocM_V1_AccessAndUseOfBuildings'},"Where a driveway forms all, or part of, the approach route, an additional allowance of at least <e1>900mm</e1> <e2>wide</e2> should be provided so that a wheelchair user can pass a parked car.",part-of,annotated
+d925c189-860a-4fcb-ae88-d1cf8cc14fb8_4,,,"The <e1>class</e1> of steps in covered or heated outdoor staircases must be no less than <e2>15 degrees</e2>, and the riser may be no more than 160 millimetres.",greater-equal,synthetic
+8151be81-09ad-4dac-b2d2-f0d757915b6c_1,,,"However, when the snow load can occur, the <e1>elevation difference</e1> of the load s should be at least <e2>One</e2>.",greater-equal,synthetic
+bd670961-83e8-410a-85a4-578f2d00c626,"In all cases, roof insulation should be continuous with wall insulation.",{'ID': '168_UK_DocL_V1_ConsrvationOfFuelAndPower'},"In all cases, <e1>roof</e1> <e2>insulation</e2> should be continuous with wall insulation.",part-of,annotated
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9,"In buildings more than 9 metres and at most 28 metres in height, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",{'ID': '126_Finnish_SafetyOfUse'},"In buildings more than 9 metres and at most 28 metres in height, the attic and <e1>roof</e1> must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be <e2>accessible via the interior</e2>.",necessity,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_4,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for <e1>output</e1> <e2>1,000 millimetres</e2> and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",equal,synthetic
+4a82f789-a98a-4379-9b81-2a20cfba6c87_4,,,"If the internal ties must be centred on the supporting line, the minimum value of the <e1>going</e1>, <e2>adequate means</e2>, will also be applied to internal ties.",greater-equal,synthetic
+31d635b2-1d32-49dd-a848-5b5acaf50128,"For existing dwellings, when installing a complete new or replacement system (e.g. replacing a heating system including the heating appliance, pipework and heat emitters), the energy performance of the whole system should be assessed.",{'ID': '407_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For existing dwellings, when installing a complete new or replacement system (e.g. replacing a heating system including the heating appliance, pipework and heat emitters), the energy performance of the <e1>whole</e1> <e2>system</e2> should be assessed.",selection,annotated
+5fa7daca-cb50-4397-a736-617e52d30187_9,,,"If <e1>total combined window area</e1> at below 30% are required and unavailable, the <e2>target emission rate</e2> may be taken as equal to that at 30% load.",equal,synthetic
+2a2dbb92-88af-47f5-bd1e-b3ddea4c1ec9,"The approach route should be safe and convenient for everyone, be at the shallowest gradient that can reasonably be achieved, and be stepfree, irrespective of the storey on which the dwelling is located.",{'ID': '70_UK_DocM_V1_AccessAndUseOfBuildings'},"The <e1>approach route</e1> should be safe and convenient for everyone, be at the shallowest gradient that can reasonably be achieved, and <e2>be stepfree</e2>, irrespective of the storey on which the dwelling is located.",necessity,annotated
+b6e6ebce-e75f-4fae-b9a2-e35c164b3fb4,"Where onsite electricity generation and storage is installed, such as photovoltaic panels or battery storage, systems should be an appropriate size for the site, available infrastructure and onsite energy demand.",{'ID': '342_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where <e1>onsite electricity generation and storage</e1> is <e2>installed</e2>, such as photovoltaic panels or battery storage, systems should be an appropriate size for the site, available infrastructure and onsite energy demand.",selection,annotated
+46f5be2a-1514-420b-bc39-331fc6e0d2df_9,,,"The dwelling primary energy rate, <e1>reverberation time</e1> and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the target primary energy rate, <e2>opening angle</e2> and target fabric energy efficiency rate, respectively.",less-equal,synthetic
+793cb939-b3d9-46eb-ae65-71a4d5c8031b,Where the parking is within the private curtilage of the dwelling (but not within a carport or garage) at least one space is a standard parking bay that can be widened to 3.3m.,{'ID': '43_UK_DocM_V1_AccessAndUseOfBuildings'},Where the parking is within the private curtilage of the dwelling (but not within a carport or garage) <e1>at least one space is a standard parking bay</e1> that can be <e2>widened</e2> to 3.3m.,part-of,annotated
+b5aa20f2-571e-48d8-9943-4102c9f9bd1a,"In exit passageways and fire-compartmented elevator shafts, means must be arranged for both smoke extraction and flow of replacement air.",{'ID': '250_Finnish_FireSafety'},"In exit passageways and <e1>fire-compartmented</e1> <e2>elevator shafts</e2>, means must be arranged for both smoke extraction and flow of replacement air.",selection,annotated
+259c1614-77ef-4ae4-a401-83caa603e374,"The main doors for entering a dwelling (usually the front doorset) should be fitted with a multipoint locking system that meets the requirements of: PAS 3621 (key locking on both sides), or PAS 8621 (non-key locking on the internal face), or PAS 10621 (non-key locking on the internal face, but with an external locking override facility).",{'ID': '35_UK_DocQ_Security_Dwellings'},"The <e1>main doors</e1> for entering a dwelling (usually the front doorset) should be fitted with a <e2>multipoint locking system</e2> that meets the requirements of: PAS 3621 (key locking on both sides), or PAS 8621 (non-key locking on the internal face), or PAS 10621 (non-key locking on the internal face, but with an external locking override facility).",necessity,annotated
+a0c838b5-5fe2-4b52-abe1-432804c2c8aa_6,,,A <e1>rise</e1> of 21 C shall be used as the <e2>reception</e2> for room temperature during the heating season.,equal,synthetic
+ee0c8c7c-c65e-4403-92e6-628fd680f3bf_4,,,"Any panel within the doorset should be at least <e1>2,100 millimetres</e1> <e2>CO2</e2>.",greater-equal,synthetic
+eccd4f77-ef4a-41fd-a22a-620c84fdddd4,There is a minimum of 400mm of worktop to at least one side of the oven and fridge or fridge freezer where this is taller than the worktop height (or to one side of a pair of tall appliances where they are located together at the end of a run).,{'ID': '98_UK_DocM_V1_AccessAndUseOfBuildings'},There is a minimum of 400mm of worktop to at least <e1>one side</e1> of the <e2>oven</e2> and fridge or fridge freezer where this is taller than the worktop height (or to one side of a pair of tall appliances where they are located together at the end of a run).,part-of,annotated
+984c252b-74f4-4d85-9080-1c8ae1851eca_2,,,"If performance requires thicker glass to be used, an equivalent window unit with <e1>exit</e1> (<e2>0.136kgCO2/kWh</e2>) glazing should be shown to meet the required standard.",equal,synthetic
+103f99ad-884b-4bae-9f22-ccb1c5bc3d26_11,,,"In an open garage of no more than <e1>20C</e1> <e2>controls</e2>, the maximum area may be used as the surface area of the storeys, even though the driveways between the various storeys are combined.",less-equal,synthetic
+b51c7a9f-2080-4e60-940f-e59af0cc97ce,"The buildings enclosure together with its construction layers and joints must form a whole, preventing the transfer of water across the surface of the enclosure into the construction by wind, slanting rain and wind pressure.",{'ID': '34_Finnish_Health-Humidity'},"The buildings <e1>enclosure</e1> together with its construction layers and joints must <e2>form a whole, preventing the transfer of water across the surface of the enclosure into the construction by wind, slanting rain and wind pressure</e2>.",necessity,annotated
+956efc87-87de-4d3c-99fb-dc58eab9353b,"A  dwelling  that  is  intended  for  sheltered  housing  or  supported  housing  of  a  person  with mobility or functional impairment shall have at least one toilet and washing facility which has a  free  space  with  a  diameter  of  at  least  1,500  millimetres.",{'ID': '42_Finnish_Accessibility'},"A dwelling that is intended for sheltered housing or supported housing of a person with mobility or functional impairment shall have at least one <e1>toilet and washing facility</e1> which has a <e2>free space</e2> with a diameter of at least 1,500 millimetres.",part-of,annotated
+4e8c5c50-44af-48f6-b959-e6f9b31afa1e_3,,,"If the planned time of use of a modular or portable building in a single location is less than two years, the only practical <e1>requirements</e1> may be <e2>outdoor air and exhaust air ducts</e2>.",equal,synthetic
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_9,,,"In buildings more than <e1>0.3W/m2</e1> and at most 28 metres in <e2>U-value</e2>, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",greater,synthetic
+a1f91cfd-21f8-49a4-8468-746f49f4848e,"For a building that contains more than one dwelling for example a block of flats or a terrace of houses an average target primary energy rate, target emission rate and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",{'ID': '50_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For a building that contains more than one dwelling for example a block of flats or a terrace of houses an average <e1>target primary energy rate</e1>, <e2>target emission rate</e2> and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",none,annotated
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c_6,,,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding <e1>1,000 millimetres</e1> <e2>district heat networks</e2> is EI 30; however, minor sealing parts and penetrations may be class E 15.",greater,synthetic
+8b054fa5-fa6b-40f8-996a-a6dfea855fc3_8,,,"The <e1>dimensions</e1> between a door that opens onto a landing and the upper edge of the ramp or flight of stairs must be no less than <e2>150mm</e2> on the side wall and no less than 1,500 millimetres on the end wall.",greater-equal,synthetic
+511c1a7f-08b9-48ec-aea6-9b749fdf31a1_1,,,"A non-residential building shall, considering the intended use and functional units of the building and distances in the building, have an <e1>01:20:00</e1> of appropriately located <e2>construction layers</e2> which are suitable for users of wheelchairs and walking frames with wheels.",equal,synthetic
+0d8c2f7d-5234-4bec-bbbe-961e499ebbbc,"A proportion of the sleeping accommodation in hotels, motels and student accommodation should be designed for independent use by wheelchair users.",{'ID': '129_UK_DocM_V2_AccessAndUseOfBuildings'},"A proportion of the <e1>sleeping accommodation</e1> in <e2>hotels</e2>, motels and student accommodation should be designed for independent use by wheelchair users.",part-of,annotated
+56166e36-b14b-4632-9767-70b71d335d9c,"When a dwelling undergoes a major renovation, the technical, environmental and economic feasibility of installing high-efficiency alternative systems should be considered.",{'ID': '98_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When a dwelling undergoes a major renovation, the technical, <e1>environmental</e1> and economic <e2>feasibility of installing high-efficiency alternative systems</e2> should be considered.",selection,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479_3,,,Individual flights are: for <e1>width</e1> up to <e2>400mm</e2> not more than 10m long; for gradients up to 1:12 not more than 5m long.,less-equal,synthetic
+dcc583b1-8c4c-42cf-a1ed-e8907de56254_5,,,"The <e1>water temperature</e1> of the indoor steps of other spaces intended for everyday use may be no more than <e2>6m</e2>, and the tread must be no less than 270 millimetres.",less-equal,synthetic
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_0,,,"The wall ties should have a <e1>seasonal energy efficiency ratio</e1> of <e2>0.35W/(m2K)</e2> and a vertical spacing of 450mm, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",equal,synthetic
+26980508-105c-49db-8595-bf001a48d757,"In rooms with no fixed seats or furnishings, the number of persons shall be calculated to be two persons per square metre.",{'ID': '103_Finnish_SafetyOfUse'},"In rooms with no <e1>fixed</e1> seats or <e2>furnishings</e2>, the number of persons shall be calculated to be two persons per square metre.",selection,annotated
+bf798097-bb99-42d0-a73f-8cebab8fbeb8_2,,,"In the entrance halls and other indoor areas of administrative, service and business premises and in assembly areas, the riser of the steps must be no more than 160 millimetres and the <e1>alongside the leading edge</e1> must be no less than <e2>three metres</e2>.",greater-equal,synthetic
+0f8b3f66-6496-431c-bdc1-75570dde9ee6,"All cable routes should be laid as straight as possible and with suitable access points, so that cables can be pulled through in future.",{'ID': '111_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"All cable routes should be laid as straight as possible and with <e1>suitable</e1> <e2>access points</e2>, so that cables can be pulled through in future.",selection,annotated
+fb5d3054-4911-4049-ba09-1c3e80f9c07c_1,,,"The tread of steps in uncovered or unheated outdoor staircases must be no less than 390 millimetres, and the <e1>design solar load</e1> may be no more than <e2>between 550mm and 700mm</e2>.",less-equal,synthetic
+0da52584-1b37-48b5-840f-3795ae695275_7,,,the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where <e1>0.35W/(m2K)</e1> <e2>residential unit</e2> are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+0d8c2f7d-5234-4bec-bbbe-961e499ebbbc,"A proportion of the sleeping accommodation in hotels, motels and student accommodation should be designed for independent use by wheelchair users.",{'ID': '129_UK_DocM_V2_AccessAndUseOfBuildings'},"A proportion of the sleeping accommodation in <e1>hotels</e1>, motels and <e2>student accommodation</e2> should be designed for independent use by wheelchair users.",none,annotated
+fa90c179-d32c-412b-a7d6-a515cc91dbdb,The structure of the exterior wall against the ground must be waterproofed or isolated against water pressure or a structurally managed water removal system allowing the cellar wall to dry in an outward direction must be used to prevent moisture from the surrounding ground and storm water from penetrating the wall structure.,{'ID': '86_Finnish_Health-Humidity'},The structure of the exterior wall <e1>against the ground</e1> must be waterproofed or isolated against water pressure or a structurally managed water removal system <e2>allowing the cellar wall to dry in an outward direction</e2> must be used to prevent moisture from the surrounding ground and storm water from penetrating the wall structure.,none,annotated
+7a1bc727-1daa-4668-83f6-b44327b96898,"In glazed balconies, the spread of fire from one balcony to another and to an adjacent fire compartment must be restricted.",{'ID': '133_Finnish_FireSafety'},"In <e1>glazed</e1> <e2>balconies</e2>, the spread of fire from one balcony to another and to an adjacent fire compartment must be restricted.",selection,annotated
+2ff58135-b89d-40d1-a145-51aad9e5a942,"The landing in front of the outside door shall be at least 1,500 millimetres wide and at least 1,500 millimetres long.",{'ID': '16_Finnish_Accessibility'},"The <e1>landing</e1> in front of the outside door shall be at least 1,500 millimetres wide and at least 1,500 millimetres <e2>long</e2>.",part-of,annotated
+48133b44-eac2-44e2-b2df-c52243e9f7ea,"NOTE: For example, if the total system output is made up of three equally sized boilers, at 15% of system output the lead boiler will be operating at 45% of its rated output with the other two boilers switched off.",{'ID': '244_UK_DocM_V2_AccessAndUseOfBuildings'},"NOTE: For example, if the <e1>total</e1> system output is <e2>made up of three equally sized boilers</e2>, at 15% of system output the lead boiler will be operating at 45% of its rated output with the other two boilers switched off.",none,annotated
+8207751f-13b8-4fe3-9bfe-4423093d4905,A  building  with  dwellings  or  accommodation  or  patient  rooms  shall  be  designed  and implemented so that the reverberation time of the staircase and exit route is no more than 1.3 seconds.,{'ID': '26_Finnish_AcousticEnvironment'},A <e1>building</e1> with dwellings or accommodation or <e2>patient rooms</e2> shall be designed and implemented so that the reverberation time of the staircase and exit route is no more than 1.3 seconds.,part-of,annotated
+2f8d4247-e53b-49ae-bd26-c4f1765eaee8_11,,,"Extract air of <e1>opening</e1> 2, 3 and <e2>70 kN</e2> shall not be used as recirculation air.",equal,synthetic
+8c7cf3d7-3ab9-4cb4-99bf-016cbbd4914d,Mechanical ventilation systems must be commissioned to provide adequate ventilation.,{'ID': '180_UK_DocF_V1_Ventilation'},<e1>Mechanical</e1> ventilation systems must be <e2>commissioned to provide adequate ventilation</e2>.,none,annotated
+a94b6b4f-a05e-403e-bbca-ebe1b94e38a1,"The area of sloping surfaces such as staircases, galleries, raked auditoria and tiered terraces should be taken as their area on plan.",{'ID': '470_UK_DocM_V2_AccessAndUseOfBuildings'},"The area of <e1>sloping surfaces</e1> such as staircases, galleries, <e2>raked auditoria</e2> and tiered terraces should be taken as their area on plan.",selection,annotated
+8c7cf3d7-3ab9-4cb4-99bf-016cbbd4914d,Mechanical ventilation systems must be commissioned to provide adequate ventilation.,{'ID': '180_UK_DocF_V1_Ventilation'},Mechanical <e1>ventilation systems</e1> must be <e2>commissioned to provide adequate ventilation</e2>.,necessity,annotated
+7f3f59a4-fc7e-4b14-8074-384f6cacf548_8,,,"The height of a barrier in a dwellings indoor areas may, however, be at least 0.9 metres if the <e1>total extract air flow</e1> is less than <e2>23C</e2>.",less,synthetic
+beeec1b2-c382-40cc-aec2-6eda86f5782e,"Each residential unit, shared communal room and common space should be categorised separately.",{'ID': '25_UK_DocO_Overheating'},"Each residential unit, <e1>shared</e1> <e2>communal room</e2> and common space should be categorised separately.",selection,annotated
+e505b13c-7b62-4857-aa2d-544dc986e9c0_6,,,"For dwellings, for external tapered steps and stairs that are part of the building the <e1>number of people evacuating</e1> of each step should be a minimum of <e2>proportion</e2>.",greater-equal,synthetic
+eefe1191-2903-4fb8-9138-6471e09fb67d_11,,,The <e1>going</e1> exceeds <e2>five</e2> at 11pm.,greater,synthetic
+dcc583b1-8c4c-42cf-a1ed-e8907de56254,"The rise of the indoor steps of other spaces intended for everyday use may be no more than 180 millimetres, and the tread must be no less than 270 millimetres.",{'ID': '23_Finnish_SafetyOfUse'},"The rise of the indoor <e1>steps</e1> of other spaces intended for everyday use may be no more than 180 millimetres, and the <e2>tread</e2> must be no less than 270 millimetres.",part-of,annotated
+8421f806-70f2-46a9-a308-90a40da3541d_0,,,"Where the <e1>continuity</e1> of the approach, whether over its whole length or in part, is <e2>20C</e2> or steeper, that part of the approach should be designed as ramped access.",greater-equal,synthetic
+7e34700e-92de-4b00-a820-f4085a2e186c_4,,,"If the <e1>Air flow rates</e1> between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than <e2>0.136kgCO2/kWh</e2>, the wall in question must be class EI 15.",less,synthetic
+7f3f59a4-fc7e-4b14-8074-384f6cacf548,"The height of a barrier in a dwellings indoor areas may, however, be at least 0.9 metres if the drop is less than three metres.",{'ID': '45_Finnish_SafetyOfUse'},"The <e1>height</e1> of a barrier in a dwellings indoor areas may, however, be at least <e2>0.9 metres</e2> if the drop is less than three metres.",greater-equal,annotated
+7e34700e-92de-4b00-a820-f4085a2e186c_3,,,"If the <e1>absence</e1> between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than <e2>50mm</e2>, the wall in question must be class EI 15.",less,synthetic
+d8066a73-49c2-4e99-825a-b49b9b2ba67d_5,,,A landing measuring at least <e1>one</e1> in <e2>height</e2> must be reserved in front of and behind a door located in an exit route.,greater-equal,synthetic
+cf35d4a4-3170-421b-9be1-b68d928eed1d_8,,,"A roof with a <e1>construction</e1> greater than <e2>65mm</e2> must be constructed making appropriate use of walkways, roof ladders, safety ladders, roof stairs, roof treads and foot rails.",greater,synthetic
+4e1bda84-398f-4bae-a335-2c7f24501b09,The water heater is situated centrally with a distribution system to supply water to the drawoff points and has a capacity greater than 300 litres.,{'ID': '456_UK_DocM_V2_AccessAndUseOfBuildings'},The <e1>water heater</e1> is <e2>situated centrally with a distribution system to supply water to the drawoff points</e2> and has a capacity greater than 300 litres.,necessity,annotated
+09b2a395-5293-4b7d-82d4-5312482d59e9_7,,,"Door entry controls, where provided, are mounted <e1>850-1000mm</e1> <e2>entrance level</e2> finished ground level, and at least 300mm away from any projecting corner.",equal,synthetic
+8421f806-70f2-46a9-a308-90a40da3541d_10,,,"Where the <e1>building primary energy rate</e1> of the approach, whether over its whole length or in part, is <e2>28 metres</e2> or steeper, that part of the approach should be designed as ramped access.",greater-equal,synthetic
+3724fd47-22f7-432c-81a2-1abcb95c7df2,"The total number of ventilators installed in a dwellings habitable rooms and kitchens should be no fewer than five, except in one bedroom properties, where there should be no fewer than four.",{'ID': '96_UK_DocF_V1_Ventilation'},"The total number of ventilators installed in a dwellings habitable rooms and kitchens should be no fewer than five, except in one bedroom <e1>properties</e1>, where there should be no fewer than <e2>four</e2>.",greater-equal,annotated
+0096a3bf-ac16-4a75-adf9-8c3f4a9b8610,The smaller dimension of each panel which can be either the width or height of the panel should be 230mm or less.,{'ID': '33_UK_DocQ_Security_Dwellings'},The <e1>smaller</e1> <e2>dimension</e2> of each panel which can be either the width or height of the panel should be 230mm or less.,selection,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_11,,,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under <e1>sum</e1> <e2>100</e2>.",equal,synthetic
+117864c0-5065-4c55-b390-c17b60c8d9dd,"If the protective part of the barrier contains only vertical structures, a cube with edges of no more than 100 millimetres may pass through its openings.",{'ID': '48_Finnish_SafetyOfUse'},"If the protective part of the <e1>barrier</e1> <e2>contains only vertical structures</e2>, a cube with edges of no more than 100 millimetres may pass through its openings.",none,annotated
+7d877df3-9aa7-4dff-a64d-5356a66c944d,"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a width exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",{'ID': '59_Finnish_SafetyOfUse'},"In public outdoor and indoor spaces, and in business and service premises, a <e1>handrail</e1> must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a width exceeding 2.4 metres and are located in assembly areas, it must also be <e2>placed so as to divide the passageway into parts no wider than the abovementioned width</e2>.",necessity,annotated
+2de867fe-80e7-4617-ad18-36225dd45ab1_7,,,Hinged or pivot windows with an <e1>pitch</e1> of less than <e2>16/01/2023 00:00</e2> are not suitable for purge ventilation.,less,synthetic
+ffc11c58-ff7e-45f4-a5c7-da59404e5659,"Reasonable provision shall be made in the design and installation of electrical installations in order to protect persons operating, maintaining or altering the installations from fire or injury.",{'ID': '1_UK_DocP_ElectricalSafety'},"Reasonable provision shall be made in the <e1>design</e1> and installation of <e2>electrical installations</e2> in order to protect persons operating, maintaining or altering the installations from fire or injury.",part-of,annotated
+86350df0-a40e-412b-a301-004524d56736,"For wet heating systems in new dwellings with a floor area of 150m2 or greater, a minimum of two independently controlled heating circuits should be provided.",{'ID': '246_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For wet <e1>heating systems</e1> in <e2>new</e2> dwellings with a floor area of 150m2 or greater, a minimum of two independently controlled heating circuits should be provided.",none,annotated
+e874f337-2067-4e77-ad32-c3b857f40e7a_4,,,"If the <e1>atmosphere</e1> exceeds <e2>190 kN</e2>, the total minimum width of the exits shall be calculated by increasing the original 1,200 millimetres by 400 millimetres for each additional group of 60 people.",greater,synthetic
+d988e207-c3f9-4314-9a16-f99b334595f4_5,,,The <e1>travel distance</e1> must be no less than <e2>20mm</e2>.,greater-equal,synthetic
+6b2f3ca5-8cea-4616-8679-438446bc6233,"Since doors are potential barriers, their use should be avoided whenever appropriate.",{'ID': '88_UK_DocM_V2_AccessAndUseOfBuildings'},"Since doors are potential barriers, their <e1>use</e1> should be <e2>avoided whenever appropriate</e2>.",necessity,annotated
+a4dc06ab-99c3-4c8b-b295-eb3e6a64320a,"The free height from the ground or from the surface of a driveway or walkway of the lower edge of a structural element, device or equipment protruding from the building, such as a balcony, bay window, sign, lighting device or awning, must be at least 2.2 metres, unless the area is protected so as to prevent the danger of collision.",{'ID': '99_Finnish_SafetyOfUse'},"The free <e1>height</e1> <e2>from the ground</e2> or from the surface of a driveway or walkway of the lower edge of a structural element, device or equipment protruding from the building, such as a balcony, bay window, sign, lighting device or awning, must be at least 2.2 metres, unless the area is protected so as to prevent the danger of collision.",selection,annotated
+88e23b46-22d9-4be6-87b7-40541f7995a9_11,,,"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the <e1>Extract</e1> exceeds <e2>between 550mm and 700mm</e2>; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",greater,synthetic
+525aa713-65e1-4368-a6f4-38f628be7fed,"in clothes shops, the dimensions and fittings recommended for an individual changing cubicle in a sports building should be provided.",{'ID': '177_UK_DocM_V2_AccessAndUseOfBuildings'},"in clothes shops, the dimensions and <e1>fittings</e1> recommended for an individual changing cubicle in a sports <e2>building</e2> should be provided.",necessity,annotated
+783c19fa-0ef2-466f-b3e9-d4690e34ac5f,Where a system for onsite electricity generation is installed (a) reasonable provision must be made to ensure that (i) the system and its electrical output are appropriately sized for the site and available infrastructure; (ii) the system has effective controls; and (b) it must be commissioned by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.,{'ID': '214_UK_DocL_V1_ConsrvationOfFuelAndPower'},Where a system for onsite electricity generation is installed (a) reasonable provision must be made to ensure that (i) the system and its electrical output are appropriately sized for the site and available infrastructure; (ii) the system has effective controls; and (b) it must be <e1>commissioned</e1> by <e2>testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances</e2>.,selection,annotated
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77,Skirtings totalling up to 50mm total thickness and shallow projecting ducts or casings above 1800mm may be discounted when measuring clear width.,{'ID': '131_UK_DocM_V1_AccessAndUseOfBuildings'},Skirtings totalling up to 50mm total thickness and <e1>shallow projecting</e1> ducts or <e2>casings</e2> above 1800mm may be discounted when measuring clear width.,selection,annotated
+eff9dd2f-007f-4caf-bb2e-3ff65db910b0,A passenger lift is the most suitable means of vertical access and should be provided wherever possible.,{'ID': '103_UK_DocM_V2_AccessAndUseOfBuildings'},A <e1>passenger lift</e1> is the most suitable means of vertical access and should be <e2>provided wherever possible</e2>.,necessity,annotated
+9027959e-efc1-4d32-acbe-e0775d40f001,"The morticed bolts should have a minimum projection of 20mm, should be at least 100mm from the top and bottom corners of the door, and should avoid any door construction joints.",{'ID': '38_UK_DocQ_Security_Dwellings'},"The morticed bolts should have a minimum <e1>projection</e1> of <e2>20mm</e2>, should be at least 100mm from the top and bottom corners of the door, and should avoid any door construction joints.",greater-equal,annotated
+7f3f59a4-fc7e-4b14-8074-384f6cacf548_6,,,"The height of a barrier in a dwellings indoor areas may, however, be at least 0.9 metres if the <e1>indoor units</e1> is less than <e2>35 mg/m3 (30 ppm)</e2>.",less,synthetic
+750a4f32-2581-4040-ac8b-8e4ad59abd56,Extract ventilators in sanitary accommodation should be capable of continuous operation if required.,{'ID': '48_UK_DocF_V2_Ventilation'},<e1>Extract ventilators</e1> in sanitary accommodation should be <e2>capable of continuous operation if required</e2>.,necessity,annotated
+678e5476-66e6-40c2-a409-a8248dc6cef7,The sign should be sited where a person installing an electric vehicle charge point in future will see it.,{'ID': '120_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},The <e1>sign</e1> should be <e2>sited where a person installing an electric vehicle charge point in future will see it</e2>.,necessity,annotated
+d941229d-4de4-4873-9704-c207a9b673c8,An exit enclosure has doors that open separately into each adjoining fire compartment without a need to open the doors at the same time.,{'ID': '26_Finnish_FireSafety'},An exit enclosure has <e1>doors</e1> that <e2>open separately into each adjoining fire compartment without a need to open the doors at the same time</e2>.,selection,annotated
+a090f6bb-f89b-44c1-b6ee-8e72e2be30a0,Where a system for on-site electricity generation is installed (a) reasonable provision must be made to ensure that (i) the system and its electrical output are appropriately sized for the site and available infrastructure; (ii) the system has effective controls; and (b) it must be commissioned by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.,{'ID': '370_UK_DocM_V2_AccessAndUseOfBuildings'},Where a system for on-site electricity generation is installed (a) reasonable <e1>provision</e1> must be made to ensure that (i) the <e2>system and its electrical output</e2> are appropriately sized for the site and available infrastructure; (ii) the system has effective controls; and (b) it must be commissioned by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.,selection,annotated
+0aaf71f0-a482-4a72-a407-0d6db79c7f6f_11,,,"In a building consisting primarily of one storey, no more than 200 m2 of fire-compartmented and no more than <e1>65mm</e1> of non-fire-compartmented <e2>rooms</e2> that essentially relate to the business of the building may be located on the level of second storey.",less-equal,synthetic
+aa41a5d4-c0b1-4da7-84a0-5c2e2738654f,The total number of ventilators installed in the dwellings habitable rooms and kitchens should be at least the following: Five ventilators if the dwelling has more than one bedroom.,{'ID': '89_UK_DocF_V1_Ventilation'},The <e1>total number of ventilators</e1> installed in the dwellings habitable rooms and kitchens should be at least the following: Five ventilators if the dwelling has more than <e2>one</e2> bedroom.,none,annotated
+23cff3c3-1251-4c5f-9fd9-8f52d25eb494,Gasfired boilers and multi-stage oilfired boilers with an output of more than 500kW should have fully modulating burner controls.,{'ID': '252_UK_DocM_V2_AccessAndUseOfBuildings'},Gasfired boilers and multi-stage oilfired boilers with an <e1>output</e1> of more than <e2>500kW</e2> should have fully modulating burner controls.,greater,annotated
+ef9dc94d-b79c-4fba-897a-eed2b90084b2,"Thermal bridging, including at the party wall, should be reasonably limited.",{'ID': '150_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Thermal bridging</e1>, <e2>including at the party wall</e2>, should be reasonably limited.",selection,annotated
+993e54cc-49c3-43cb-995e-1a951c93c775,"When a warning sign is not posted, the areas shall be designed to an axle load Qk and also to an axle group load equal to 190 kN.",{'ID': '25_Finnish_StabilityOfStructures'},"When a warning sign is not posted, the <e1>areas</e1> shall be designed to an axle load Qk and also to an <e2>axle group load</e2> equal to 190 kN.",part-of,annotated
+117864c0-5065-4c55-b390-c17b60c8d9dd,"If the protective part of the barrier contains only vertical structures, a cube with edges of no more than 100 millimetres may pass through its openings.",{'ID': '48_Finnish_SafetyOfUse'},"If the <e1>protective part</e1> of the <e2>barrier</e2> contains only vertical structures, a cube with edges of no more than 100 millimetres may pass through its openings.",part-of,annotated
+793cb939-b3d9-46eb-ae65-71a4d5c8031b_4,,,Where the <e1>ladder</e1> is within the private curtilage of the dwelling (but not within a carport or <e2>fire compartment</e2>) at least one space is a standard parking bay that can be widened to 3.3m.,not-part-of,synthetic
+2de867fe-80e7-4617-ad18-36225dd45ab1_0,,,Hinged or pivot windows with an <e1>ending</e1> of less than <e2>two years</e2> are not suitable for purge ventilation.,less,synthetic
+bb9ec292-062b-43c3-8590-856dd5f6b890_2,,,"The building primary energy rate and <e1>sizes</e1> calculated using the measured air permeability must not be higher than the target primary energy rate and <e2>fittings</e2>, respectively.",less-equal,synthetic
+8aa4b706-1659-4e30-a4fe-e7f33efe3241_3,,,All <e1>40 degrees Celsius</e1> <e2>building envelope</e2> of the compliance checklist should be completed.,equal,synthetic
+716fa732-f3c7-43ad-a4e3-fff43a841018,The vehicle traffic area of a building and its courtyard must be safe and appropriate.,{'ID': '131_Finnish_SafetyOfUse'},The <e1>vehicle traffic area</e1> of a building and its courtyard must be safe and <e2>appropriate</e2>.,necessity,annotated
+d342429e-d3fc-46e0-a195-527cfef1fd4b,"When an existing building with a total useful floor area of over 1000m2 is being extended or the habitable area is being increased, consequential improvements should be installed.",{'ID': '451_UK_DocM_V2_AccessAndUseOfBuildings'},"When an existing building with a total useful floor area of over 1000m2 is being extended or the <e1>habitable area</e1> is <e2>being increased</e2>, consequential improvements should be installed.",selection,annotated
+76bf63bd-30f4-440d-81a0-61ca16170f70,Control should be maximised and heat gain to uninsulated pipes should only be permitted where the proportion of the cooling load relating to distribution pipework is less than 1 of the total load.,{'ID': '177_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Control</e1> should be <e2>maximised</e2> and heat gain to uninsulated pipes should only be permitted where the proportion of the cooling load relating to distribution pipework is less than 1 of the total load.,necessity,annotated
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms <e1>in connection with saunas</e1>; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility <e2>intended for public use</e2>; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",none,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",{'ID': '84_Finnish_Health-IndoorClimateAndVentilation'},"If the <e1>air flows</e1> of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under <e2>category</e2> 2.",none,annotated
+86831830-e7f0-4b90-aa27-dc0542b7ba4d,"If a residential block of flats does not have a lift, the stairs between floor levels must have natural light and at least one intermediate landing.",{'ID': '18_Finnish_SafetyOfUse'},"If a residential block of flats does not have a <e1>lift</e1>, the stairs between floor levels must have <e2>natural light</e2> and at least one intermediate landing.",none,annotated
+e505b13c-7b62-4857-aa2d-544dc986e9c0,"For dwellings, for external tapered steps and stairs that are part of the building the going of each step should be a minimum of 280mm.",{'ID': '18_UK_DocK_ProtectionFromFalling'},"For dwellings, for <e1>external</e1> tapered steps and stairs that are part of the building the <e2>going</e2> of each step should be a minimum of 280mm.",none,annotated
+c384013b-c40f-4925-acbe-465e1ca5bc13_7,,,<e1>600 millimetres</e1> <e2>building control body</e2> per detail should be recorded.,equal,synthetic
+81314489-dcd9-410f-9b15-595b87e7c8f9_6,,,"The resilient layer should be timber sheathing at least <e1>1,200 millimetres</e1> <e2>travel distance</e2>, expanded metal or a similar resilient material.",greater-equal,synthetic
+06c2e0f7-69c8-47ec-bf31-9902ae9df7cf,"Provision shall be made for any windows, skylights, or any transparent or translucent walls, ceilings or roofs to be safely accessible for cleaning.",{'ID': '109_UK_DocK_ProtectionFromFalling'},"Provision shall be made for any windows, skylights, or any transparent or translucent <e1>walls</e1>, ceilings or roofs to <e2>be safely accessible for cleaning</e2>.",necessity,annotated
+c384013b-c40f-4925-acbe-465e1ca5bc13_11,,,<e1>20</e1> <e2>heat</e2> per detail should be recorded.,equal,synthetic
+5f7b8ff7-50d0-46a2-a48b-fa19786c98fd,"If  the  domestic  hot  water cylinder  is  located  inside  the  building  envelope,  50  of  the  calculated  domestic  hot  water cylinder heat loss shall be added to the thermal load of the spaces of the building.",{'ID': '105_Finnish_EnergyEfficiency'},"If the domestic <e1>hot water cylinder</e1> is <e2>located inside the building envelope</e2>, 50 of the calculated domestic hot water cylinder heat loss shall be added to the thermal load of the spaces of the building.",selection,annotated
+46f5be2a-1514-420b-bc39-331fc6e0d2df_8,,,"The <e1>water temperature</e1>, dwelling emission rate and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the <e2>Manual control</e2>, target emission rate and target fabric energy efficiency rate, respectively.",less-equal,synthetic
+6c789809-b1b8-429a-8fe2-8ce16f8a4b54_6,,,Air flows in the continuous working area of a parking garage for motor vehicles shall be designed so that the <e1>cross fall</e1> does not exceed <e2>0.8 metres</e2>.,less-equal,synthetic
+4abb3268-3ba6-47e8-a8b7-4676dbaa9a16,"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide all means of escape routes with a minimum clear headroom of 2m, except in doorways.",{'ID': '28_UK_DocK_ProtectionFromFalling'},"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide <e1>all</e1> means of escape routes with a minimum <e2>clear</e2> headroom of 2m, except in doorways.",none,annotated
+2cc3d5b0-d3b4-45f2-a00d-838fd3f9abbb_6,,,"There should be a <e1>swimming pools</e1>, in the absence of tobacco smoke or other excessive pollutants, of <e2>0.136kgCO2/kWh</e2>.",equal,synthetic
+457ecdc0-8247-4ad4-9beb-3b7a31cfa0fd,"All public areas, including lavatory accommodation, public telephones and external terraces should be accessible.",{'ID': '138_UK_DocM_V2_AccessAndUseOfBuildings'},"All public areas, including lavatory <e1>accommodation</e1>, public telephones and external terraces should be <e2>accessible</e2>.",none,annotated
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be class E 15.",{'ID': '134_Finnish_FireSafety'},"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding two <e1>storeys</e1> is EI 30; however, <e2>minor</e2> sealing parts and penetrations may be class E 15.",none,annotated
+511c1a7f-08b9-48ec-aea6-9b749fdf31a1_6,,,"A non-residential building shall, considering the intended use and functional units of the building and distances in the building, have an <e1>20 millimetres</e1> of appropriately located <e2>standing auditorium</e2> which are suitable for users of wheelchairs and walking frames with wheels.",equal,synthetic
+825053cb-af5d-43a9-b59b-e2a5ae78ea73_10,,,The <e1>dwelling emission rate</e1> of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the <e2>quality of the installation</e2> of dwellings in the residential building; b. the number of associated parking spaces.,greater,synthetic
+203faa23-7b71-47c9-a6e5-2333ac45389e_6,,,"The <e1>internal temperature</e1> of the indoor steps of dwelling units and living quarters may be no more than <e2>600 x 600 millimetres</e2>, and the tread must be no less than 250 millimetres.",less-equal,synthetic
+f41fb8da-16bd-4404-accb-e32727f3736a,"Windows, glass walls and glass doors into which there is a danger of collision must be marked in such a way that they can be easily noticed.",{'ID': '69_Finnish_SafetyOfUse'},"Windows, <e1>glass</e1> <e2>walls</e2> and glass doors into which there is a danger of collision must be marked in such a way that they can be easily noticed.",selection,annotated
+20518e80-6f7e-457f-8c5a-59fa4c0eb324,"When calculating the heat loss for a buildings design solution, the design value shall be used as the value of the air leakage rate figure for the building envelope.",{'ID': '137_Finnish_EnergyEfficiency'},"When calculating the heat loss for a <e1>buildings</e1> design solution, the <e2>design value</e2> shall be used as the value of the air leakage rate figure for the building envelope.",none,annotated
+a5e9c36f-358f-4375-943c-6d5b89c82647,"Any abrupt level differences of over 0.7 metres and any precipices located in the vicinity of common play and recreation areas associated with buildings with more than two dwellings must be indicated by appropriate barriers or suitable planted areas, or outfitted with a base that cushions any fall.",{'ID': '92_Finnish_SafetyOfUse'},"Any abrupt <e1>level differences</e1> of over 0.7 metres and any precipices located in the vicinity of common play and recreation areas associated with buildings with more than two dwellings must be <e2>indicated by appropriate barriers or suitable planted areas</e2>, or outfitted with a base that cushions any fall.",necessity,annotated
+8e8f4fb5-00b5-404f-89df-a07287984748,"In buildings with a total useful floor area greater than 1000m2, automatic meter reading and data collection facilities should be installed.",{'ID': '229_UK_DocM_V2_AccessAndUseOfBuildings'},"In <e1>buildings</e1> with a <e2>total useful floor area</e2> greater than 1000m2, automatic meter reading and data collection facilities should be installed.",part-of,annotated
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3_2,,,"Where the cost of installing only cable routes is more than 7% of the total cost of the major <e1>open-plan space</e1>, there is no <e2>elevator shafts</e2> to install either electric vehicle charge points or cable routes.",not-part-of,synthetic
+c145afb4-469c-49a7-a14f-167094cf055e,People should be able to appreciate easily where to place their feet by highlighting nosings and avoiding open rises.,{'ID': '54_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>People</e1> should be able to <e2>appreciate easily where to place their feet by highlighting nosings and avoiding open rises</e2>.,necessity,annotated
+6414854d-01f9-481f-a7f4-c4581e48d8b1,Special safety features are not necessary if the ladder is not more than 6m long.,{'ID': '112_UK_DocK_ProtectionFromFalling'},Special safety features are not necessary if the <e1>ladder</e1> is not more than <e2>6m</e2> long.,less-equal,annotated
+a4dc06ab-99c3-4c8b-b295-eb3e6a64320a_11,,,"The free <e1>type and quality</e1> from the ground or from the surface of a driveway or walkway of the lower edge of a structural element, device or equipment protruding from the building, such as a balcony, bay window, sign, lighting device or awning, must be at least <e2>90</e2>, unless the area is protected so as to prevent the danger of collision.",greater-equal,synthetic
+8cef7dc5-2d76-4dd8-80c5-6861b11a8f6f_4,,,"Where the work concerns a building containing more than <e1>E 15</e1> <e2>centralised system</e2>, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",greater-equal,synthetic
+0a53e4af-84a7-46aa-b28a-cb1d873c8cae,"The type and quality of public address, hearing enhancement and telephone systems should be chosen carefully to ensure intelligibility.",{'ID': '151_UK_DocM_V2_AccessAndUseOfBuildings'},"The <e1>type and quality</e1> of public address, <e2>hearing enhancement</e2> and telephone systems should be chosen carefully to ensure intelligibility.",selection,annotated
+09b2a395-5293-4b7d-82d4-5312482d59e9,"Door entry controls, where provided, are mounted 900-1000mm above finished ground level, and at least 300mm away from any projecting corner.",{'ID': '46_UK_DocM_V1_AccessAndUseOfBuildings'},"<e1>Door entry controls</e1>, where provided, are <e2>mounted</e2> 900-1000mm above finished ground level, and at least 300mm away from any projecting corner.",selection,annotated
+cea6e7bd-c494-4146-9f81-3fd2ed64a2a6_0,,,The <e1>water temperature</e1> of the floor surface in the seating area and access route may not exceed <e2>25mm</e2>.,less-equal,synthetic
+316c89ee-aa42-4e7a-9372-960cf25b3265,Extract ventilation may be by natural means or by mechanical means (e.g. by an extract fan or acentral system).,{'ID': '105_UK_DocF_V2_Ventilation'},Extract ventilation may be by natural <e1>means</e1> or by mechanical means (e.g. by an extract fan or <e2>acentral system</e2>).,selection,annotated
+bb309bf3-9e86-43d9-8b6e-ebff176d1c88,The sink is not more than 150mm deep with insulation to the underside to prevent scalding of a wheelchair users legs.,{'ID': '96_UK_DocM_V1_AccessAndUseOfBuildings'},The <e1>sink</e1> is not more than 150mm deep with <e2>insulation to the underside</e2> to prevent scalding of a wheelchair users legs.,necessity,annotated
+72d7716f-7e3e-442c-9e42-14d4b19e18e3_3,,,A <e1>electric vehicle charge points</e1> that is being connected to a new building should not have a <e2>length</e2> for delivered heat to the building which is greater than 0.350kgCO2/kWh.,not-part-of,synthetic
+0aaf71f0-a482-4a72-a407-0d6db79c7f6f_7,,,"In a building consisting primarily of one storey, no more than 200 m2 of fire-compartmented and no more than <e1>2.0 m3/(h m2)</e1> of non-fire-compartmented <e2>basement storeys</e2> that essentially relate to the business of the building may be located on the level of second storey.",less-equal,synthetic
+569c7958-b7d6-4b9c-9dd9-13307e95e59b,"For ducted systems that are served by fans with a design flow rate greater than 1m3/s, ductwork leakage tests should be carried out.",{'ID': '385_UK_DocM_V2_AccessAndUseOfBuildings'},"For ducted systems that are served by fans with a <e1>design flow rate</e1> greater than <e2>1m3/s</e2>, ductwork leakage tests should be carried out.",greater,annotated
+f19c6d4a-f6e8-4f2e-b676-537852f3c38f,"The heat loss from the floor should be calculated using the sum of the thermal resistance of the floor finish and the underlying heated layer, multiplied by 10.",{'ID': '303_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The <e1>heat loss</e1> from the floor should be <e2>calculated using the sum of the thermal resistance of the floor finish and the underlying heated layer, multiplied by 10</e2>.",necessity,annotated
+d3e7a947-536e-4a49-9823-e27fc0f68b27_10,,,<e1>design value</e1> of landings to be at least equal to the <e2>type and quality</e2> of the ramp.,greater-equal,synthetic
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_2,,,"In buildings more than <e1>B</e1> and at most 28 metres in <e2>equivalent area</e2>, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",greater,synthetic
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_11,,,"The wall ties should have a horizontal spacing of 900mm and a <e1>Capacities</e1> of <e2>0.055555556</e2>, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",equal,synthetic
+4abb3268-3ba6-47e8-a8b7-4676dbaa9a16_7,,,"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide all means of escape routes with a minimum clear <e1>total floor area</e1> of <e2>500kW</e2>, except in doorways.",equal,synthetic
+5ca184fa-e100-4f97-957d-e37ae944786f_3,,,The <e1>Geo-location</e1> of installing electric vehicle charge points and cable routes is not more than <e2>twice the rise plus the going (2R G)</e2> of the total capital cost of the major renovation.,less-equal,synthetic
+0da52584-1b37-48b5-840f-3795ae695275_11,,,the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where <e1>100</e1> <e2>non-domestic building</e2> are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new <e1>building</e1> as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and <e2>bathrooms</e2> as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",none,annotated
+fc129e2c-abfa-48be-9fd6-e85f077ae67b,"A space alongside the leading edge of a door should be provided to enable a wheelchair user to reach and grip the door handle, then open the door without releasing hold on the handle and without the footrest colliding with the return wall.",{'ID': '70_UK_DocM_V2_AccessAndUseOfBuildings'},"A space <e1>alongside the leading edge</e1> of a <e2>door</e2> should be provided to enable a wheelchair user to reach and grip the door handle, then open the door without releasing hold on the handle and without the footrest colliding with the return wall.",part-of,annotated
+37f01a2c-b944-45a2-a7f4-140d8c03d7ac_4,,,"After rebating, frame components should retain at least <e1>230mm</e1> of <e2>Ladders</e2>.",greater-equal,synthetic
+f9de28ac-45bb-4400-9d9f-8afee73bd2e3_11,,,The <e1>type and quality</e1> should not exceed <e2>50mm</e2> of dwelling floor area.,less-equal,synthetic
+75c60084-6878-472d-8694-e8739e0dd76c_4,,,The width of access routes in assembly areas with a <e1>air extract rate</e1> of <e2>20 millimetres</e2> must be at least 900 millimetres.,equal,synthetic
+8207751f-13b8-4fe3-9bfe-4423093d4905_3,,,A building with dwellings or accommodation or patient rooms shall be designed and implemented so that the <e1>sales counter</e1> of the staircase and exit route is no more than <e2>100 litres</e2>.,less-equal,synthetic
+cf35d4a4-3170-421b-9be1-b68d928eed1d_5,,,"A roof with a <e1>integrity</e1> greater than <e2>2</e2> must be constructed making appropriate use of walkways, roof ladders, safety ladders, roof stairs, roof treads and foot rails.",greater,synthetic
+8b054fa5-fa6b-40f8-996a-a6dfea855fc3,"The distance between a door that opens onto a landing and the upper edge of the ramp or flight of stairs must be no less than 400 millimetres on the side wall and no less than 1,500 millimetres on the end wall.",{'ID': '33_Finnish_SafetyOfUse'},"The distance <e1>between a door that opens onto a landing and the upper edge of the ramp or flight of stairs</e1> must be no less than <e2>400 millimetres</e2> on the side wall and no less than 1,500 millimetres on the end wall.",none,annotated
+61bc1c7a-62f8-43c1-9c71-6e3073695cbe,"Roofs: insulation should be installed tight to the structure, without air gaps, and should extend to the wall insulation.",{'ID': '143_UK_DocL_V1_ConsrvationOfFuelAndPower'},"<e1>Roofs</e1>: <e2>insulation</e2> should be installed tight to the structure, without air gaps, and should extend to the wall insulation.",part-of,annotated
+fa8a6d84-eb99-490e-8169-3c65353fb553,"For large roofs, where the smaller horizontal dimension of the roof is 50 m or more, and the topography is windswept, the value of the exposure coefficient shall be at least 1.",{'ID': '61_Finnish_StabilityOfStructures'},"For large <e1>roofs</e1>, where the smaller horizontal dimension of the roof is 50 m or more, and the <e2>topography</e2> is windswept, the value of the exposure coefficient shall be at least 1.",part-of,annotated
+4d80c4d1-08ee-481a-9f9c-e9151ce1094d_5,,,"The <e1>elevation difference</e1> of windows, roof windows, rooflights and doors should not exceed <e2>21 C</e2> of the total floor area of the dwelling.",less-equal,synthetic
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_11,,,Skirtings totalling up to 50mm total thickness and shallow projecting <e1>exhaust air terminal</e1> or casings above <e2>0.05</e2> may be discounted when measuring clear width.,greater,synthetic
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_6,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the <e1>headroom</e1> from these spaces does not exceed <e2>8.5m2</e2> of the total air flow in the vertical duct.",less-equal,synthetic
+835d8fad-7a27-4299-aa38-a5b1771a6779_8,,,"In large building complexes, such as retail parks and large sports centres, there should be <e1>25W/m2</e1> wheelchair-accessible unisex <e2>cooker</e2> capable of including an adult changing table.",equal,synthetic
+c0a6d35c-cc20-428b-941d-c3e3e6365c74_2,,,"In a tier that is uninterrupted by cross-gangways, and where the pitch exceeds 25, use a <e1>to enhance</e1> number of steps of <e2>1,000 millimetres</e2>.",equal,synthetic
+87c9c5f5-18dc-4107-b4af-b44dfb2b9627,The effective rated output should be assessed based on the final installed capacity of the heating or air-conditioning system.,{'ID': '326_UK_DocM_V2_AccessAndUseOfBuildings'},The <e1>effective</e1> <e2>rated output</e2> should be assessed based on the final installed capacity of the heating or air-conditioning system.,selection,annotated
+2b60007d-59a3-4a18-a184-89e76ee17454,Masonry construction: external or cavity wall insulation should extend below the damp-proof course (where applicable) and be at least the equivalent of one full block height (215mm) below the underside of the floor structure/slab and beyond the depth of the floor insulation.,{'ID': '161_UK_DocL_V1_ConsrvationOfFuelAndPower'},Masonry construction: <e1>external</e1> or cavity wall insulation should extend below the damp-proof course (where applicable) and be <e2>at least the equivalent of one full block height (215mm) below the underside of the floor structure/slab and beyond the depth of the floor insulation</e2>.,none,annotated
+8b1482fe-5e9d-4b44-9157-a8de35c65ba9,"If an exposed facade is close to an area of sustained and loud noise (e.g. a main road), then a noise-attenuating background ventilator should be fitted.",{'ID': '86_UK_DocF_V1_Ventilation'},"If an exposed <e1>facade</e1> is close to an area of sustained and loud noise (e.g. a main road), then a <e2>noise-attenuating background ventilator</e2> should be fitted.",necessity,annotated
+7f3f59a4-fc7e-4b14-8074-384f6cacf548,"The height of a barrier in a dwellings indoor areas may, however, be at least 0.9 metres if the drop is less than three metres.",{'ID': '45_Finnish_SafetyOfUse'},"The height of a <e1>barrier</e1> in a dwellings indoor areas may, however, be at least 0.9 metres if the <e2>drop</e2> is less than three metres.",none,annotated
+26980508-105c-49db-8595-bf001a48d757_10,,,"In <e1>sign</e1> with no fixed <e2>adjoining rooms</e2> or furnishings, the number of persons shall be calculated to be two persons per square metre.",not-part-of,synthetic
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_6,,,"The wall ties should have a <e1>Leakage</e1> of <e2>400kg</e2> and a vertical spacing of 450mm, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",equal,synthetic
+8c79efc1-f3e8-4394-ae6a-0bf5432ebcc5,NOTE: Ventilation through infiltration should be considered to be part of the ventilation provision of a dwelling.,{'ID': '131_UK_DocF_V1_Ventilation'},NOTE: Ventilation through infiltration should be considered to be part of the <e1>ventilation provision</e1> of a <e2>dwelling</e2>.,part-of,annotated
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3_10,,,"Where the <e1>net absorber area</e1> of installing only cable routes is more than <e2>25mm</e2> of the total cost of the major renovation, there is no requirement to install either electric vehicle charge points or cable routes.",greater,synthetic
+05fdde92-d8af-42ad-963b-9019c69a8ab3,"For a timber frame where the intermediate floor structure breaches the external wall insulation, further insulation of the same thickness as the insulation used in the external wall should be included within the depth of the intermediate floor structure.",{'ID': '163_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For a <e1>timber frame</e1> where the intermediate floor structure breaches the external wall insulation, further insulation of the same <e2>thickness</e2> as the insulation used in the external wall should be included within the depth of the intermediate floor structure.",none,annotated
+26980508-105c-49db-8595-bf001a48d757_3,,,"In <e1>ventilation space or gap</e1> with no fixed <e2>Drawings</e2> or furnishings, the number of persons shall be calculated to be two persons per square metre.",not-part-of,synthetic
+3121fe90-27db-405e-a42a-df3cd22ee176_2,,,"Where necessary, <e1>400mm</e1><e2>Handrails</e2>, one above the other, must be installed in order to take into account children and users of wheelchairs.",equal,synthetic
+e4fb8d18-8dbc-4351-a2df-d87f880f476a_5,,,The <e1>locations</e1> for balconies is <e2>100</e2> that of the load-bearing structures of the storey.,equal,synthetic
+fc129e2c-abfa-48be-9fd6-e85f077ae67b,"A space alongside the leading edge of a door should be provided to enable a wheelchair user to reach and grip the door handle, then open the door without releasing hold on the handle and without the footrest colliding with the return wall.",{'ID': '70_UK_DocM_V2_AccessAndUseOfBuildings'},"A <e1>space</e1> <e2>alongside the leading edge</e2> of a door should be provided to enable a wheelchair user to reach and grip the door handle, then open the door without releasing hold on the handle and without the footrest colliding with the return wall.",selection,annotated
+29232335-402c-4ed9-af74-fd093ac22e28_4,,,The natural or mechanical ventilation system of a building shall be strong and its air-tightness shall be at least <e1>dwelling fabric energy efficiency rate</e1> <e2>01:20:00</e2>.,greater-equal,synthetic
+ded852b5-c826-4649-8ce5-dece0eba6061,"During the design period of occupancy, a building's room temperature shall be comfortable and not adversely affected by air velocity, thermal radiation, temperature fluctuation, temperature differences or surface temperatures.",{'ID': '32_Finnish_Health-IndoorClimateAndVentilation'},"During the design period of occupancy, a <e1>building's</e1> <e2>room temperature</e2> shall be comfortable and not adversely affected by air velocity, thermal radiation, temperature fluctuation, temperature differences or surface temperatures.",part-of,annotated
+4ee66fa0-9dcc-4332-b001-f1aec49d9af9,It should be recognised that there is the danger where adjacent spaces each have an induction loop system that the signals may overlap.,{'ID': '154_UK_DocM_V2_AccessAndUseOfBuildings'},It should be recognised that there is the danger where adjacent <e1>spaces</e1> each have an <e2>induction loop system</e2> that the signals may overlap.,part-of,annotated
+3c0a8ccb-d813-40fb-b69b-88250d3bc4ec_11,,,These fittings should not exceed a <e1>agreed level of provision</e1> of <e2>adequate means</e2>.,less-equal,synthetic
+533762d6-e592-494d-a08b-a0817b5b4f9f,"If there are associated parking spaces where there is not a requirement to install electric vehicle charge points, cable routes must be installed in all remaining associated parking spaces.",{'ID': '50_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If there are <e1>associated</e1> <e2>parking spaces</e2> where there is not a requirement to install electric vehicle charge points, cable routes must be installed in all remaining associated parking spaces.",selection,annotated
+f72a98f3-b7d2-4633-b244-0d7242dfb0c9,Every single bedroom has a minimum floor area of 8.5m2 and is at least 2.4m wide.,{'ID': '102_UK_DocM_V1_AccessAndUseOfBuildings'},Every single bedroom has a minimum floor area of <e1>8.5m2</e1> and is at least 2.4m <e2>wide</e2>.,none,annotated
+56b3f993-37b5-4cb1-9540-432972f8056e,"In a mechanical ventilation system, the air handling units and chambers shall be able to withstand the loads caused by fan pressure while the shutoff dampers are closed.",{'ID': '99_Finnish_Health-IndoorClimateAndVentilation'},"In a <e1>mechanical</e1> ventilation system, the air handling units and chambers shall be able to <e2>withstand the loads caused by fan pressure while the shutoff dampers are closed</e2>.",none,annotated
+dd056285-1aa4-4c6d-94ac-b911458cb7ea,"Where any of the parking spaces for new buildings other than residential or mixed-use buildings are in a covered car park, the requirement to install an electric vehicle charge point should be met by installing a charge point in a parking space that is not within a covered car park.",{'ID': '70_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where any of the parking spaces for new buildings other than residential or mixed-use buildings are in a <e1>covered</e1> <e2>car park</e2>, the requirement to install an electric vehicle charge point should be met by installing a charge point in a parking space that is not within a covered car park.",selection,annotated
+835d8fad-7a27-4299-aa38-a5b1771a6779,"In large building complexes, such as retail parks and large sports centres, there should be one wheelchair-accessible unisex toilet capable of including an adult changing table.",{'ID': '178_UK_DocM_V2_AccessAndUseOfBuildings'},"In large building complexes, such as retail parks and large sports centres, there should be <e1>one</e1> wheelchair-accessible unisex <e2>toilet</e2> capable of including an adult changing table.",equal,annotated
+09b2a395-5293-4b7d-82d4-5312482d59e9_8,,,"Door entry controls, where provided, are mounted <e1>600kg/m3</e1> <e2>deep</e2> finished ground level, and at least 300mm away from any projecting corner.",equal,synthetic
+05fdde92-d8af-42ad-963b-9019c69a8ab3_4,,,"For a timber frame where the intermediate floor structure breaches the external wall insulation, further insulation of the same <e1>U-values</e1> as the <e2>emergency repairs</e2> used in the external wall should be included within the depth of the intermediate floor structure.",equal,synthetic
+8beb3f9d-f806-4385-b876-2b3d29d7852a,Independent temperature control of the hot water circuit should be implemented with a cylinder thermostat and a timing device.,{'ID': '269_UK_DocL_V1_ConsrvationOfFuelAndPower'},Independent <e1>temperature control</e1> of the hot water circuit should be <e2>implemented with a cylinder thermostat and a timing device</e2>.,necessity,annotated
+77f993c6-dff1-4f9a-8f66-73221d3cbaff_6,,,"If the dwelling only has <e1>off</e1> <e2>service building</e2>, a minimum ventilation rate of 13l/s should be used.",equal,synthetic
+536b172d-ccd1-479a-8136-6ee05db0f264_11,,,"Where pipework is above ground, the performance of the pipe <e1>measurements</e1> should be at least as high as the <e2>intended purpose</e2> of pipework in the buried part of the system.",greater-equal,synthetic
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c_5,,,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be <e1>load EER</e1> <e2>0.5 kN/m2</e2>.",equal,synthetic
+f5a71c7b-e852-40f2-8f88-91cda7902a7e,"If a new building has a space heating or airconditioning system with an effective rated output greater than 180kW, a building automation and control system should be installed.",{'ID': '319_UK_DocM_V2_AccessAndUseOfBuildings'},"If a new building has a <e1>space heating or airconditioning system</e1> with an <e2>effective rated output</e2> greater than 180kW, a building automation and control system should be installed.",part-of,annotated
+77f993c6-dff1-4f9a-8f66-73221d3cbaff_4,,,"If the dwelling only has one habitable room, a minimum <e1>lengths</e1> of <e2>0.15m/s</e2> should be used.",greater-equal,synthetic
+1913381b-a2cc-496e-9168-82ccf2a01d50_5,,,"In connection with repair and alteration work, the heat emitters connected to the domestic hot water ring duct may be replaced so that the <e1>extract air categories</e1> of the heat emitters to be installed does not exceed <e2>15 degrees</e2>.",less-equal,synthetic
+e505b13c-7b62-4857-aa2d-544dc986e9c0,"For dwellings, for external tapered steps and stairs that are part of the building the going of each step should be a minimum of 280mm.",{'ID': '18_UK_DocK_ProtectionFromFalling'},"For <e1>dwellings</e1>, for external tapered steps and <e2>stairs</e2> that are part of the building the going of each step should be a minimum of 280mm.",part-of,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_8,,,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under <e1>ventilation provision</e1> <e2>270 millimetres</e2>.",equal,synthetic
+fb5d3054-4911-4049-ba09-1c3e80f9c07c_4,,,"The <e1>lengths</e1> of steps in uncovered or unheated outdoor staircases must be no less than <e2>0.7 metres</e2>, and the riser may be no more than 130 millimetres.",greater-equal,synthetic
+703e5c71-bd54-4267-acf4-fa7db1e70d49,"Any sound system in an auditorium, a restaurant, a conference facility, a facility for festive occasions, a teaching facility or other similar assembly facility or a public service facility shall have an induction loop or a similar sound transmission system.",{'ID': '67_Finnish_Accessibility'},"Any sound system in an <e1>auditorium</e1>, a restaurant, a conference facility, a <e2>facility for festive occasions</e2>, a teaching facility or other similar assembly facility or a public service facility shall have an induction loop or a similar sound transmission system.",none,annotated
+3e9fc57e-bc69-4f17-a056-dd7767afa9bb_3,,,"If the <e1>locations</e1> of the building does not exceed <e2>270 millimetres</e2>, access to the attic fire compartments from the outside shall be required.",less-equal,synthetic
+7e34700e-92de-4b00-a820-f4085a2e186c_3,,,"If the free gap between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than 2 metres, the wall in question must be <e1>planned time of use</e1> <e2>eight per cent</e2>.",equal,synthetic
+d3e7a947-536e-4a49-9823-e27fc0f68b27_1,,,<e1>headroom</e1> of landings to be at least equal to the <e2>results</e2> of the ramp.,greater-equal,synthetic
+37f01a2c-b944-45a2-a7f4-140d8c03d7ac_11,,,"After rebating, frame components should retain at least <e1>6mm</e1> of <e2>rooflight-and-kerb assemblies</e2>.",greater-equal,synthetic
+7a6635fc-c464-4d61-8ef1-2fdbf13bb9e7,"U-values for rooflights or rooflight-and-kerb assemblies should be based on the developed surface area of the rooflight (U_d values), which is often greater than the area of the roof opening.",{'ID': '140_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>U-values</e1> for rooflights or <e2>rooflight-and-kerb assemblies</e2> should be based on the developed surface area of the rooflight (U_d values), which is often greater than the area of the roof opening.",part-of,annotated
+710ef992-e187-4b1a-894b-e0e222f54359_3,,,"NOTE: For grid-supplied electricity, a <e1>parasitic energy use</e1> of <e2>44mm</e2> and primary energy factor of 1.501kWhPE/kWh should be used.",equal,synthetic
+986f7853-4975-4ecd-8f10-a75d818eb44a,"Fully insulated and continuous cavity closers should be used, installed tight to the insulation and cavity apertures.",{'ID': '140_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Fully insulated and continuous <e1>cavity closers</e1> should be <e2>used</e2>, installed tight to the insulation and cavity apertures.",necessity,annotated
+fb3922fb-8844-40e2-98f5-86e8cccabc72,Cable routes should be provided from a metered electricity supply point to the future connection location.,{'ID': '107_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},<e1>Cable routes</e1> should be <e2>provided from a metered electricity supply point to the future connection location</e2>.,necessity,annotated
+636bce88-fd3b-4e5a-9f6a-4aa0d3d1bfa4_10,,,"Where a new building contains more than <e1>44mm</e1> <e2>sand</e2>, a common access point for a gigabit-capable public electronic communications network is required as a part of the buildings gigabit-ready physical infrastructure.",greater,synthetic
+8d11b1a7-732a-4153-9564-3f35cc111cb6,A dwelling that is only a basement should be treated as a single-storey dwelling above ground level.,{'ID': '74_UK_DocF_V1_Ventilation'},A <e1>dwelling</e1> that is only a basement should be <e2>treated as a single-storey dwelling above ground level</e2>.,necessity,annotated
+cccbc1ea-27be-4d7b-b53c-3cb467a51020,"For heating and cooling systems in a new non-domestic building, or when a heat generator such as a boiler is replaced in an existing non-domestic building, each room should be provided with thermostatic room controls.",{'ID': '220_UK_DocM_V2_AccessAndUseOfBuildings'},"For heating and cooling systems in a new non-domestic building, or when a heat generator such as a boiler is replaced in an <e1>existing</e1> <e2>non-domestic building</e2>, each room should be provided with thermostatic room controls.",selection,annotated
+5b1fe636-d2aa-4382-885e-a4f8a2cae4d4,"Generally, a thermal element once upgraded should not have a U-value greater than 0.7W/(m2K).",{'ID': '125_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Generally, a <e1>thermal element</e1> once <e2>upgraded</e2> should not have a U-value greater than 0.7W/(m2K).",selection,annotated
+b4cef2a7-038c-4f72-8ea6-20e43d766165,"The building primary energy rate and building emission rate submission should be accompanied by a report, signed by a suitably qualified person, detailing how the CO2 emission factors and primary energy factors have been derived.",{'ID': '70_UK_DocM_V2_AccessAndUseOfBuildings'},"The building primary energy rate and building emission rate submission should be accompanied by a <e1>report</e1>, <e2>signed by a suitably qualified person</e2>, detailing how the CO2 emission factors and primary energy factors have been derived.",selection,annotated
+23cff3c3-1251-4c5f-9fd9-8f52d25eb494_5,,,Gasfired boilers and multi-stage oilfired boilers with an <e1>steps</e1> of more than <e2>300 litres</e2> should have fully modulating burner controls.,greater,synthetic
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",{'ID': '75_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major <e1>renovation</e1> (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major <e2>renovation</e2>.",none,annotated
+511c1a7f-08b9-48ec-aea6-9b749fdf31a1,"A non-residential building shall, considering the intended use and functional units of the building and distances in the building, have an adequate number of appropriately located toilet facilities which are suitable for users of wheelchairs and walking frames with wheels.",{'ID': '51_Finnish_Accessibility'},"A <e1>non-residential building</e1> shall, considering the intended use and functional units of the building and distances in the building, have an adequate number of appropriately located <e2>toilet facilities</e2> which are suitable for users of wheelchairs and walking frames with wheels.",part-of,annotated
+d342429e-d3fc-46e0-a195-527cfef1fd4b_2,,,"When an existing building with a total useful <e1>air distribution</e1> of over <e2>190 kN</e2> is being extended or the habitable area is being increased, consequential improvements should be installed.",greater,synthetic
+4ee66fa0-9dcc-4332-b001-f1aec49d9af9,It should be recognised that there is the danger where adjacent spaces each have an induction loop system that the signals may overlap.,{'ID': '154_UK_DocM_V2_AccessAndUseOfBuildings'},It should be recognised that there is the danger where <e1>adjacent</e1> <e2>spaces</e2> each have an induction loop system that the signals may overlap.,selection,annotated
+d8066a73-49c2-4e99-825a-b49b9b2ba67d_6,,,A landing measuring at least <e1>2.0 m3/(h m2)</e1> in <e2>from the inside face of the wall</e2> must be reserved in front of and behind a door located in an exit route.,greater-equal,synthetic
+8207751f-13b8-4fe3-9bfe-4423093d4905,A  building  with  dwellings  or  accommodation  or  patient  rooms  shall  be  designed  and implemented so that the reverberation time of the staircase and exit route is no more than 1.3 seconds.,{'ID': '26_Finnish_AcousticEnvironment'},A building with dwellings or accommodation or patient rooms shall be designed and implemented so that the <e1>reverberation time</e1> of the staircase and <e2>exit route</e2> is no more than 1.3 seconds.,part-of,annotated
+2cc3d5b0-d3b4-45f2-a00d-838fd3f9abbb_1,,,"There should be a <e1>Their</e1>, in the absence of tobacco smoke or other excessive pollutants, of <e2>2.4 metres</e2>.",equal,synthetic
+9618a274-45da-4e3e-87f0-21c2bfae4a8e,"A guardrail must be used at points with a level difference of over 0.7 metres, if these can be accessed by children.",{'ID': '39_Finnish_SafetyOfUse'},"A guardrail must be used at points with a <e1>level difference</e1> of over <e2>0.7 metres</e2>, if these can be accessed by children.",greater,annotated
+825053cb-af5d-43a9-b59b-e2a5ae78ea73_3,,,The <e1>total combined window area</e1> of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the number of dwellings in the residential building; b. the <e2>speed</e2> of associated parking spaces.,greater,synthetic
+3724fd47-22f7-432c-81a2-1abcb95c7df2_5,,,"The total number of ventilators installed in a dwellings habitable rooms and kitchens should be no fewer than five, except in <e1>one metre</e1> <e2>places</e2> properties, where there should be no fewer than four.",equal,synthetic
+38745b5e-4dea-43fe-9378-5befa5a2399d,A copy of the completed commissioning sheet should be given to the owner of the building.,{'ID': '99_UK_DocF_V2_Ventilation'},A copy of the completed <e1>commissioning sheet</e1> should be <e2>given to the owner of the building</e2>.,none,annotated
+9abdce80-0a4a-400a-8725-205bb3b887e4,"In hard water areas, suitable measures should be taken to treat the feed water to water heaters and the hot water circuit of combination boilers to reduce limescale accumulation.",{'ID': '218_UK_DocM_V2_AccessAndUseOfBuildings'},"In hard water areas, <e1>suitable</e1> measures should be taken to <e2>treat the feed water to water heaters and the hot water circuit of combination boilers to reduce limescale accumulation</e2>.",none,annotated
+3f7c10d1-d801-4351-bc85-187cf8cffeb3,The water vapour resistance and air tightness of external walls and their various layers as well as the structures attached to the external wall and joints to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,{'ID': '96_Finnish_Health-Humidity'},The water vapour resistance and air tightness of external walls and their various layers as well as the structures attached to the external wall and joints to the <e1>external</e1> <e2>wall</e2> must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,selection,annotated
+61bc1c7a-62f8-43c1-9c71-6e3073695cbe,"Roofs: insulation should be installed tight to the structure, without air gaps, and should extend to the wall insulation.",{'ID': '143_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Roofs: <e1>insulation</e1> should be <e2>installed tight to the structure, without air gaps</e2>, and should extend to the wall insulation.",necessity,annotated
+419892bb-5044-4c63-a8ba-7747ad52c23d,"When installing windows, roof windows, rooflights or doors (all of which are controlled fittings), the controlled fitting should be well fitted and reasonably draught-proof.",{'ID': '195_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When installing <e1>windows</e1>, <e2>roof windows</e2>, rooflights or doors (all of which are controlled fittings), the controlled fitting should be well fitted and reasonably draught-proof.",none,annotated
+c47598f9-df79-4d77-aba9-8f380342372f_11,,,extract air of <e1>dimension</e1> <e2>15</e2> shall be conducted to the outdoors through individual extract air ducts.,equal,synthetic
+cea6e7bd-c494-4146-9f81-3fd2ed64a2a6_7,,,The <e1>entrance level</e1> of the floor surface in the seating area and access route may not exceed <e2>10</e2>.,less-equal,synthetic
+7e34700e-92de-4b00-a820-f4085a2e186c_7,,,"If the <e1>installation</e1> between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than <e2>4</e2>, the wall in question must be class EI 15.",less,synthetic
+7e34700e-92de-4b00-a820-f4085a2e186c_4,,,"If the free gap between facing walls of adjacent glazed balconies or the <e1>high</e1> of the wall to the window of an adjacent fire compartment is less than <e2>2.4m</e2>, the wall in question must be class EI 15.",less,synthetic
+e43c1e88-be80-42d9-944e-1bf0f0f82479_2,,,Individual flights are: for gradients up to 1:15 not more than 10m long; for gradients up to 1:12 not more than <e1>25mm</e1> <e2>exit</e2>.,less-equal,synthetic
+835d8fad-7a27-4299-aa38-a5b1771a6779,"In large building complexes, such as retail parks and large sports centres, there should be one wheelchair-accessible unisex toilet capable of including an adult changing table.",{'ID': '178_UK_DocM_V2_AccessAndUseOfBuildings'},"In <e1>large</e1> building complexes, such as retail parks and large sports centres, there should be one <e2>wheelchair-accessible</e2> unisex toilet capable of including an adult changing table.",none,annotated
+73b4b305-8971-489a-a290-f996e1f63e19,"The clear width of the door and opening leading to room spaces of a non-residential building as well as to residential rooms of a residential building, necessary spaces serving residence and spaces serving the use of the building shall be at least 800 millimetres.",{'ID': '19_Finnish_Accessibility'},"The clear width of the door and <e1>opening</e1> <e2>leading to room spaces of a non-residential building as well as to residential rooms of a residential building, necessary spaces serving residence and spaces serving the use of the building</e2> shall be at least 800 millimetres.",selection,annotated
+17fba530-c42b-4eeb-85dd-16da0bacc49c,"Areas that are not enclosed, such as open floors, covered ways and balconies, should be excluded.",{'ID': '470_UK_DocL_V1_ConsrvationOfFuelAndPower'},"<e1>Areas</e1> that are not enclosed, such as open floors, <e2>covered ways</e2> and balconies, should be excluded.",selection,annotated
+079db365-cfed-474e-9329-25349ac0db4a_6,,,"In connection with the door of an outside space of an individual dwelling the <e1>air extract rate</e1> outside the door may be more than <e2>5m</e2> if the level difference can, with reasonable effort, be eliminated with equipment in the outdoor space.",greater,synthetic
+99a53f17-48cb-4012-a47b-700761e0983b_10,,,Where a new building which is not a residential building or a mixed-use building has more than <e1>0.052083333</e1> <e2>window and door units</e2> (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,greater,synthetic
+"8feaf7f2-dfd8-43ae-ab8d-791ee1ffd86c	However, if the elevation difference is no more than 1,000 millimetres, the ramp may not have a gradient of more than eight per cent.	{'ID': '9_Finnish_Accessibility'}_7",,,"However, if the <e1>protective part</e1> is no more than <e2>0.15 dm3/s per m2</e2>, the ramp may not have a gradient of more than eight per cent.",less-equal,synthetic
+51517a5d-dd11-41b9-b44b-36d87b959127,The presence of the door should be apparent not only when it is shut but also when it is open.,{'ID': '77_UK_DocM_V2_AccessAndUseOfBuildings'},The <e1>presence</e1> of the door should be apparent not only when it is shut but also when it is <e2>open</e2>.,none,annotated
+0df5892a-e396-424e-90f1-74f6ccfb9e1a,"A certain proportion of the changing rooms, washing facilities, saunas and swimming pools in a non-residential building shall be suitable for a person with mobility and functional impairment.",{'ID': '61_Finnish_Accessibility'},"A certain proportion of the changing rooms, washing facilities, saunas and swimming pools in a <e1>non-residential building</e1> shall be <e2>suitable for a person with mobility and functional impairment</e2>.",none,annotated
+3e9fc57e-bc69-4f17-a056-dd7767afa9bb_6,,,"If the <e1>dwelling fabric energy efficiency rate</e1> of the building does not exceed <e2>150m2</e2>, access to the attic fire compartments from the outside shall be required.",less-equal,synthetic
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_0,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the <e1>both sides</e1> from these spaces does not exceed <e2>twice the rise plus the going (2R G)</e2> of the total air flow in the vertical duct.",less-equal,synthetic
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3_9,,,"Where the <e1>performance</e1> of installing only cable routes is more than <e2>three</e2> of the total cost of the major renovation, there is no requirement to install either electric vehicle charge points or cable routes.",greater,synthetic
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_4,,,"The free opening of the vertical hatch or window of an emergency exit must be at least <e1>150m2</e1> in <e2>visual contrast</e2> and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",greater-equal,synthetic
+aac9b625-4f6b-42e6-b657-2accd6054607,Heating systems for screed floors that are greater than 65mm thick should automatically reduce the room temperature at night or when the room is unoccupied.,{'ID': '299_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Heating systems</e1> for <e2>screed floors</e2> that are greater than 65mm thick should automatically reduce the room temperature at night or when the room is unoccupied.,part-of,annotated
+46ee0eda-086a-40ab-8e8f-bfa4c85abd49,"If the indoor access route leading to an evacuation area in a non-residential building is via the indoor stairs in the area, these stairs must be wide enough that they can be used to transport an immobile individual on a stretcher.",{'ID': '16_Finnish_SafetyOfUse'},"If the <e1>indoor</e1> <e2>access route</e2> leading to an evacuation area in a non-residential building is via the indoor stairs in the area, these stairs must be wide enough that they can be used to transport an immobile individual on a stretcher.",selection,annotated
+a090f6bb-f89b-44c1-b6ee-8e72e2be30a0,Where a system for on-site electricity generation is installed (a) reasonable provision must be made to ensure that (i) the system and its electrical output are appropriately sized for the site and available infrastructure; (ii) the system has effective controls; and (b) it must be commissioned by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.,{'ID': '370_UK_DocM_V2_AccessAndUseOfBuildings'},Where a system for on-site electricity generation is installed (a) reasonable provision must be made to ensure that (i) the <e1>system and its electrical output</e1> are <e2>appropriately sized for the site and available infrastructure</e2>; (ii) the system has effective controls; and (b) it must be commissioned by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.,selection,annotated
+64695439-3458-4d43-8e7b-a2ba75075cea,"There must be safe and easily accessible, uninterrupted access routes to any chimneys, ventilation equipment and other building equipment and structural elements that are located on the roof of the building and that must be accessed regularly.",{'ID': '124_Finnish_SafetyOfUse'},"There must be safe and easily accessible, uninterrupted <e1>access routes</e1> to any <e2>chimneys</e2>, ventilation equipment and other building equipment and structural elements that are located on the roof of the building and that must be accessed regularly.",necessity,annotated
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3,"Where the cost of installing only cable routes is more than 7% of the total cost of the major renovation, there is no requirement to install either electric vehicle charge points or cable routes.",{'ID': '53_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where the cost of installing only cable routes is more than <e1>7%</e1> of the total cost of the major renovation, there is no <e2>requirement</e2> to install either electric vehicle charge points or cable routes.",none,annotated
+7d1ada0b-8dcc-4c01-84d7-78b80cb404c9,"If there are not enough associated parking spaces outside of the covered car park to meet the requirement to install electric vehicle charge points, then cable routes should be installed for associated parking spaces within the covered car park.",{'ID': '58_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If there are not enough associated parking spaces outside of the covered car park to meet the requirement to install electric vehicle charge points, then <e1>cable routes</e1> should be installed for associated <e2>parking spaces</e2> within the covered car park.",necessity,annotated
+1ebce0c9-705c-47ee-8429-e83cfbed72db,"All walls, ducts and boxings to every WC/cloakroom, bath and shower room are strong enough to support grab rails, seats and other adaptations that could impose a load of 1.5kN/m2.",{'ID': '103_UK_DocM_V1_AccessAndUseOfBuildings'},"All <e1>walls</e1>, ducts and boxings to every <e2>WC/cloakroom</e2>, bath and shower room are strong enough to support grab rails, seats and other adaptations that could impose a load of 1.5kN/m2.",part-of,annotated
+caf32693-fa0e-43ba-aa9f-526bcba734fa,Single glazing should be supplemented with low-emissivity secondary glazing.,{'ID': '119_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Single</e1> <e2>glazing</e2> should be supplemented with low-emissivity secondary glazing.,selection,annotated
+2cc3d5b0-d3b4-45f2-a00d-838fd3f9abbb_8,,,"There should be a <e1>lift</e1>, in the absence of tobacco smoke or other excessive pollutants, of <e2>1,500  millimetres</e2>.",equal,synthetic
+3ec0e36a-0227-4b76-9fd5-7a2f77877d99,A building that contains both living accommodation and space for commercial purposes (e.g. for a workshop or office) should be treated as a dwelling if the commercial part can be reverted to domestic use.,{'ID': '23_UK_DocM_V2_AccessAndUseOfBuildings'},A building that contains both living accommodation and space for commercial purposes (e.g. for a workshop or office) should be treated as a dwelling if the <e1>commercial part</e1> can be <e2>reverted to domestic use</e2>.,selection,annotated
+c47598f9-df79-4d77-aba9-8f380342372f_6,,,extract air of <e1>net absorber area</e1> <e2>three seconds</e2> shall be conducted to the outdoors through individual extract air ducts.,equal,synthetic
+35cacecf-06dc-4b0f-aadb-db2ee05518c7_0,,,The area of windows and roof windows (but excluding display windows) <e1>located on the roof of the building</e1> exceeds <e2>between 550mm and 700mm</e2> of the facade area.,greater,synthetic
+99a53f17-48cb-4012-a47b-700761e0983b_9,,,Where a new building which is not a residential building or a mixed-use building has more than 10 parking spaces (a) <e1>400-600mm</e1> of those <e2>bedroom</e2> must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,equal,synthetic
+75c60084-6878-472d-8694-e8739e0dd76c_0,,,The <e1>part</e1> of access routes in assembly areas with a maximum capacity of 60 persons must be at least <e2>1400mm</e2>.,greater-equal,synthetic
+b6b19c38-b160-475d-b01d-e3880ca00ab2,"Where necessary, flexible ducts may be used for final connections, but their lengths should be kept to a minimum.",{'ID': '31_UK_DocF_V2_Ventilation'},"Where necessary, flexible ducts may be used for <e1>final</e1> <e2>connections</e2>, but their lengths should be kept to a minimum.",selection,annotated
+7e34700e-92de-4b00-a820-f4085a2e186c_10,,,"If the free gap between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than 2 metres, the wall in question must be <e1>number of wall ties per square metre</e1> <e2>120</e2>.",equal,synthetic
+2b60007d-59a3-4a18-a184-89e76ee17454,Masonry construction: external or cavity wall insulation should extend below the damp-proof course (where applicable) and be at least the equivalent of one full block height (215mm) below the underside of the floor structure/slab and beyond the depth of the floor insulation.,{'ID': '161_UK_DocL_V1_ConsrvationOfFuelAndPower'},Masonry construction: external or <e1>cavity</e1> <e2>wall</e2> insulation should extend below the damp-proof course (where applicable) and be at least the equivalent of one full block height (215mm) below the underside of the floor structure/slab and beyond the depth of the floor insulation.,selection,annotated
+c384013b-c40f-4925-acbe-465e1ca5bc13_2,,,<e1>four</e1> <e2>Account</e2> per detail should be recorded.,equal,synthetic
+8efb6108-e49e-4d64-a1e4-22e3f9128b17_6,,,"When calculating the reference heat loss of a building, the value of <e1>0.3W/m2</e1> shall be used as the <e2>total load</e2> for the air leakage rate figure for the building envelope.",equal,synthetic
+ed2cca4a-50f7-470d-9752-dd8722385a24,"In dwellings and other premises that are used by children, restrictors must be installed on windows and other openings where there may be a danger of falling, and these must be such that they limit the easy opening of the window to 100 millimetres.",{'ID': '80_Finnish_SafetyOfUse'},"In dwellings and other premises that are <e1>used by children</e1>, restrictors must be installed on windows and other <e2>openings</e2> where there may be a danger of falling, and these must be such that they limit the easy opening of the window to 100 millimetres.",none,annotated
+793cb939-b3d9-46eb-ae65-71a4d5c8031b,Where the parking is within the private curtilage of the dwelling (but not within a carport or garage) at least one space is a standard parking bay that can be widened to 3.3m.,{'ID': '43_UK_DocM_V1_AccessAndUseOfBuildings'},Where the <e1>parking</e1> is within the private curtilage of the dwelling (but not within a carport or <e2>garage</e2>) at least one space is a standard parking bay that can be widened to 3.3m.,not-part-of,annotated
+569c7958-b7d6-4b9c-9dd9-13307e95e59b_6,,,"For ducted systems that are served by fans with a <e1>entry</e1> greater than <e2>2</e2>, ductwork leakage tests should be carried out.",greater,synthetic
+72e7ed0c-9e73-46b2-a919-20f3fea337fd_1,,,"An <e1>Grommets</e1> with a potentially flammable or explosive atmosphere must not be located in a <e2>Lifting devices</e2> where there are dwellings, accommodation premises, institutions or assembly and business premises.",not-part-of,synthetic
+8e5e9560-4b22-4fe0-ad86-e52b82ffe4d2,"When  calculating  the  energy  consumption  of  a  buildings  cooling  system,  the  energy consumption of cooling energy production and the electrical energy consumption of auxiliary units  shall  be  taken  into  account  where  the  use  of  the  systems  is  required  for  indoor temperature control.",{'ID': '111_Finnish_EnergyEfficiency'},"When calculating the energy consumption of a buildings cooling system, the energy consumption of cooling energy production and the <e1>electrical</e1> <e2>energy consumption</e2> of auxiliary units shall be taken into account where the use of the systems is required for indoor temperature control.",selection,annotated
+9f8c2fbb-a04e-42f9-8fa0-b7a905dbafa0,"The ventilation openings or slots leading to the ventilation space or gap of a structure equipped with a ventilation space or gap must be positioned so that the ventilation space or gap is fully usable as a ventilation air flow path and that the ventilation space or gap is free of enclosed, non-ventilated areas.",{'ID': '40_Finnish_Health-Humidity'},"The ventilation openings or slots leading to the ventilation space or gap of a structure equipped with a ventilation space or gap must be positioned so that the ventilation space or gap is fully usable as a ventilation air flow path and that the <e1>ventilation space or gap</e1> is <e2>free of enclosed, non-ventilated areas</e2>.",selection,annotated
+f505cec8-d1a6-41ae-b2ba-68ac19f64be2,"If other performance (e.g. wind load, safety, security or acoustic attenuation) requires thicker glass to be used, an equivalent window unit with standard thickness glazing should be shown to meet the required standard.",{'ID': '137_UK_DocM_V2_AccessAndUseOfBuildings'},"If <e1>other</e1> <e2>performance</e2> (e.g. wind load, safety, security or acoustic attenuation) requires thicker glass to be used, an equivalent window unit with standard thickness glazing should be shown to meet the required standard.",selection,annotated
+4e8c5c50-44af-48f6-b959-e6f9b31afa1e_5,,,"If the planned time of use of a modular or portable building in a single location is less than two years, the only practical <e1>these</e1> may be <e2>roofs</e2>.",equal,synthetic
+977ccb7b-4580-4ea3-9ea4-5057925c9854,"NOTE: The surface area of the whole building must be included when assessing whether the works constitute a major renovation, even if the building is mixed use.",{'ID': '124_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"NOTE: The surface area of the <e1>whole</e1> building must be included when assessing whether the works constitute a major renovation, even if the building is <e2>mixed use</e2>.",none,annotated
+05864826-21ef-4ae7-9af8-2aaeffc7267a_1,,,Modular and portable buildings with a planned service life of more than two years but with an <e1>difference in light reflectance value</e1> in a single location of less than <e2>400kg</e2> should be shown to comply with the energy efficiency requirements.,less,synthetic
+85cf77b8-70aa-4453-8d95-00f55a63c4ca,The provision made must be sufficient to (a) allow simple adaptation of the dwelling to meet the needs of occupants who use wheelchairs; or (b) meet the needs of occupants who use wheelchairs.,{'ID': '65_UK_DocM_V1_AccessAndUseOfBuildings'},The <e1>provision</e1> made must be sufficient to (a) allow simple adaptation of the dwelling to meet the needs of occupants who use wheelchairs; or (b) <e2>meet the needs of occupants who use wheelchairs</e2>.,necessity,annotated
+ae21bd5a-7374-43ad-900e-e2e1a6459cb0,"The target primary energy rate and target emission rate must be calculated using one of the calculation tools in the approved methodology, used in line with the version policy as stated in the methodology.",{'ID': '49_UK_DocM_V2_AccessAndUseOfBuildings'},"The <e1>target primary energy rate</e1> and target emission rate must be <e2>calculated using one of the calculation tools in the approved methodology, used in line with the version policy as stated in the methodology</e2>.",necessity,annotated
+2b60007d-59a3-4a18-a184-89e76ee17454,Masonry construction: external or cavity wall insulation should extend below the damp-proof course (where applicable) and be at least the equivalent of one full block height (215mm) below the underside of the floor structure/slab and beyond the depth of the floor insulation.,{'ID': '161_UK_DocL_V1_ConsrvationOfFuelAndPower'},Masonry construction: external or cavity wall <e1>insulation</e1> should <e2>extend below the damp-proof course</e2> (where applicable) and be at least the equivalent of one full block height (215mm) below the underside of the floor structure/slab and beyond the depth of the floor insulation.,necessity,annotated
+9f8c2fbb-a04e-42f9-8fa0-b7a905dbafa0,"The ventilation openings or slots leading to the ventilation space or gap of a structure equipped with a ventilation space or gap must be positioned so that the ventilation space or gap is fully usable as a ventilation air flow path and that the ventilation space or gap is free of enclosed, non-ventilated areas.",{'ID': '40_Finnish_Health-Humidity'},"The ventilation openings or slots leading to the ventilation space or gap of a structure equipped with a ventilation space or gap must be <e1>positioned</e1> so that the <e2>ventilation space or gap</e2> is fully usable as a ventilation air flow path and that the ventilation space or gap is free of enclosed, non-ventilated areas.",selection,annotated
+bb9ec292-062b-43c3-8590-856dd5f6b890_8,,,"The <e1>air flow rate</e1> and building emission rate calculated using the measured air permeability must not be higher than the <e2>equivalent area</e2> and target emission rate, respectively.",less-equal,synthetic
+46f5be2a-1514-420b-bc39-331fc6e0d2df_6,,,"The dwelling primary energy rate, <e1>sales counter</e1> and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the target primary energy rate, <e2>seasonal energy efficiency ratio</e2> and target fabric energy efficiency rate, respectively.",less-equal,synthetic
+8cef7dc5-2d76-4dd8-80c5-6861b11a8f6f_10,,,"Where the work concerns a building containing more than <e1>2,100 millimetres</e1> <e2>Duct</e2>, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",greater,synthetic
+48133b44-eac2-44e2-b2df-c52243e9f7ea,"NOTE: For example, if the total system output is made up of three equally sized boilers, at 15% of system output the lead boiler will be operating at 45% of its rated output with the other two boilers switched off.",{'ID': '244_UK_DocM_V2_AccessAndUseOfBuildings'},"NOTE: For example, if the <e1>total</e1> <e2>system output</e2> is made up of three equally sized boilers, at 15% of system output the lead boiler will be operating at 45% of its rated output with the other two boilers switched off.",selection,annotated
+b63dcef6-1840-4e9e-ad51-f8fc481fe856,"The wall ties should have a horizontal spacing of 900mm and a vertical spacing of 450mm, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",{'ID': '36_UK_DocA_Structure'},"The <e1>wall ties</e1> should have a horizontal spacing of 900mm and a vertical spacing of 450mm, or alternatively should be <e2>spaced</e2> such that the number of wall ties per square metre is not less than 2.5 ties/m2.",necessity,annotated
+f7935bb4-9e5f-4e91-bbf1-54e45c1ef24c_9,,,A building with a <e1>energy  consumption</e1> exceeding <e2>three</e2> must be equipped with anchoring structures for safety lines.,greater,synthetic
+5577528f-8fa0-4ca3-96f6-ea418091cb86_2,,,The side edges of stairs and landings must be fitted with a raised camber to prevent slipping over the edge if a cube measuring more than <e1>50 m2</e1> in <e2>means</e2> is able to pass through the opening between the plane level and the handrail or wall.,greater,synthetic
+19478a13-7457-4dd3-a394-744f826db7b0_4,,,"The handle to at least <e1>1,500 millimetres</e1> <e2>airleakage gaps</e2> in the principal living area is 700-1000mm above floor level, unless fitted with a remote opening device that is within this height range.",greater-equal,synthetic
+23cff3c3-1251-4c5f-9fd9-8f52d25eb494_1,,,Gasfired boilers and multi-stage oilfired boilers with an <e1>parasitic energy use</e1> of more than <e2>13l/s</e2> should have fully modulating burner controls.,greater,synthetic
+f009a781-0ced-408d-b3d1-6ae7a848012e,"The landings in the indoor and outdoor areas of a building must be safe, sufficiently spacious and suitable for their purpose.",{'ID': '31_Finnish_SafetyOfUse'},"The landings in the indoor and <e1>outdoor</e1> <e2>areas</e2> of a building must be safe, sufficiently spacious and suitable for their purpose.",selection,annotated
+2afa8bba-b5ad-4e12-bc27-4beea3fd09b2_4,,,The normal relationship between the <e1>edges</e1> of the rise and going is: <e2>8 per cent (1:12.5)</e2> equals between 550mm and 700mm.,equal,synthetic
+4fc3b5b1-a838-4429-b385-d8e80e6633eb_4,,,"In the absence of relevant harmonised European Standards, products with a <e1>distance of the basement storey floor from the entry level</e1> exceeding <e2>190 kN</e2> must have a product certificate issued by a Notified Body.",greater,synthetic
+baee716c-b8c2-4500-b4de-63fa11f007b1_7,,,A minimum of one in <e1>14 metres</e1> of the remaining <e2>watertight connection</e2> must have access to cable routes.,equal,synthetic
+536b172d-ccd1-479a-8136-6ee05db0f264_3,,,"Where pipework is above ground, the performance of the pipe <e1>device</e1> should be at least as high as the <e2>number of persons</e2> of pipework in the buried part of the system.",greater-equal,synthetic
+984c252b-74f4-4d85-9080-1c8ae1851eca_0,,,"If performance requires thicker glass to be used, an equivalent window unit with <e1>exposure coefficient</e1> (<e2>450mm</e2>) glazing should be shown to meet the required standard.",equal,synthetic
+f7935bb4-9e5f-4e91-bbf1-54e45c1ef24c_5,,,A building with a <e1>CO2 emissions</e1> exceeding <e2>50mm</e2> must be equipped with anchoring structures for safety lines.,greater,synthetic
+20518e80-6f7e-457f-8c5a-59fa4c0eb324_0,,,"When calculating the heat loss for a buildings design solution, the <e1>Level differences</e1> shall be used as the value of the <e2>target primary energy rate</e2> for the building envelope.",equal,synthetic
+28433761-e537-456b-9ff8-00e786b43143,Consumer units should be mounted so that the switches are between 1350mm and 1450mm above floor level.,{'ID': '126_UK_DocM_V1_AccessAndUseOfBuildings'},<e1>Consumer units</e1> should be <e2>mounted</e2> so that the switches are between 1350mm and 1450mm above floor level.,necessity,annotated
+c3cfbf29-a95f-4453-a7de-a8f6e4ca2ea8,"If sand, sludge, grease, petrol, oil or other detrimental physical or chemical substances may end up in the sewerage system or network or in the environment, the sewerage system shall be equipped with a separator or treatment device.",{'ID': '152_Finnish_Health-WaterAndSewerage'},"If sand, sludge, <e1>grease</e1>, petrol, oil or other detrimental physical or chemical substances may end up in the sewerage system or network or in the environment, the sewerage system shall be equipped with a <e2>separator or treatment device</e2>.",none,annotated
+d0b6759e-deec-451d-bd7a-ec65b96048be_1,,,"extract air of <e1>construction</e1> <e2>2.5 ties/m2</e2> shall be conducted through individual ducts, or common ducts serving spaces of the same type as regards level of air purity, to the outdoors, into a collection duct installed above the spaces it serves or into an extract air chamber.",equal,synthetic
+e505b13c-7b62-4857-aa2d-544dc986e9c0_11,,,"For dwellings, for external tapered steps and stairs that are part of the building the <e1>primary energy</e1> of each step should be a minimum of <e2>230mm</e2>.",greater-equal,synthetic
+0cafda73-ee3a-4a99-a224-2d142de63618,"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",{'ID': '238_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a wet <e1>heating system</e1> is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all <e2>parts</e2> of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",selection,annotated
+208b093d-361f-4aec-819d-4abca4e72c68_4,,,"in an evacuation area where the <e1>step</e1> is <e2>400mm</e2>, the second exit may be no less than 900 millimetres in width.",equal,synthetic
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_3,,,Skirtings totalling up to 50mm total thickness and shallow projecting <e1>Controls</e1> or casings above <e2>0.052083333</e2> may be discounted when measuring clear width.,greater,synthetic
+835d8fad-7a27-4299-aa38-a5b1771a6779_10,,,"In large building complexes, such as retail parks and large sports centres, there should be <e1>15</e1> wheelchair-accessible unisex <e2>ventilation equipment</e2> capable of including an adult changing table.",equal,synthetic
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_4,,,"In buildings more than 9 metres and at most <e1>four</e1> in <e2>maximum capacity</e2>, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",less-equal,synthetic
+710ef992-e187-4b1a-894b-e0e222f54359_7,,,"NOTE: For grid-supplied electricity, a <e1>annual percentage of heat</e1> of <e2>25mm</e2> and primary energy factor of 1.501kWhPE/kWh should be used.",equal,synthetic
+61630012-3ff7-44cb-af91-7845be0b6f79,"How the measurements can help you take action CO2 measurements should be used as a broad guide to ventilation within a space, rather than treated as safe thresholds.",{'ID': '126_UK_DocF_V2_Ventilation'},"How the measurements can help you take action <e1>CO2 measurements</e1> should be <e2>used as a broad guide to ventilation within a space, rather than treated as safe thresholds</e2>.",necessity,annotated
+8e8f4fb5-00b5-404f-89df-a07287984748_3,,,"In buildings with a <e1>categories</e1> greater than <e2>E</e2>, automatic meter reading and data collection facilities should be installed.",greater,synthetic
+0da52584-1b37-48b5-840f-3795ae695275,the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,{'ID': '119_UK_DocM_V2_AccessAndUseOfBuildings'},the minimum clear <e1>dimensions</e1> of the platform are: 1100mm wide and 1400mm <e2>deep</e2> where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,part-of,annotated
+3931f0fa-433e-4fb8-96bf-a747f3622ee0,"In order to help people with visual impairment to appreciate the size of a space they have entered, or to find their way around, there should be a visual contrast between the wall and the ceiling, and between the wall and the floor.",{'ID': '97_UK_DocM_V2_AccessAndUseOfBuildings'},"In order to help people with visual impairment to appreciate the size of a space they have entered, or to find their way around, there should be a <e1>visual contrast</e1> <e2>between the wall and the ceiling</e2>, and between the wall and the floor.",necessity,annotated
+34a524ec-6994-426f-86af-78788fd34a80_0,,,"Between the locking points for the mortice lock and surface-mounted rim lock, the <e1>drop</e1> should be <e2>100 litres</e2>.",equal,synthetic
+17fba530-c42b-4eeb-85dd-16da0bacc49c,"Areas that are not enclosed, such as open floors, covered ways and balconies, should be excluded.",{'ID': '470_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Areas that are <e1>not enclosed</e1>, such as <e2>open</e2> floors, covered ways and balconies, should be excluded.",none,annotated
+0cafda73-ee3a-4a99-a224-2d142de63618,"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",{'ID': '238_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a wet <e1>heating system</e1> is either: a. newly installed b. fully replaced in an existing building, including the <e2>heating appliance</e2>, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",selection,annotated
+3ca5cb38-b90b-4449-ba14-4268866df8e1,The water heater is close to the draw-off points and has a storage capacity no greater than 100 litres.,{'ID': '463_UK_DocM_V2_AccessAndUseOfBuildings'},The <e1>water heater</e1> is close to the draw-off points and has a storage capacity no greater than <e2>100 litres</e2>.,none,annotated
+956efc87-87de-4d3c-99fb-dc58eab9353b,"A  dwelling  that  is  intended  for  sheltered  housing  or  supported  housing  of  a  person  with mobility or functional impairment shall have at least one toilet and washing facility which has a  free  space  with  a  diameter  of  at  least  1,500  millimetres.",{'ID': '42_Finnish_Accessibility'},"A <e1>dwelling</e1> that is intended for sheltered housing or supported housing of a person with mobility or functional impairment shall have at least one toilet and washing facility which has a <e2>free space</e2> with a diameter of at least 1,500 millimetres.",none,annotated
+5b4380ba-0066-4735-a362-316d4c8e70b2_2,,,"Where a building undergoing major renovation, which is not a residential building or a mixeduse building, will have more than <e1>800 millimetres</e1> <e2>Waterproofing</e2> after the major renovation is completed (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.",greater,synthetic
+a8b3e54e-902c-4502-99a2-8c41d46f1416_1,,,"If there are more than <e1>200 m2</e1> <e2>foundations</e2> in a space, they must be linked to one another in at least four groups, unless the chairs are placed around tables.",greater,synthetic
+922bf8df-3a70-4f45-8c04-200b638d3b3c,The cold water pipe shall be designed and installed so that the temperature in the cold water system may not exceed 20 degrees Celsius.,{'ID': '59_Finnish_Health-WaterAndSewerage'},The cold water pipe shall be <e1>designed and installed</e1> so that the temperature in the <e2>cold water system</e2> may not exceed 20 degrees Celsius.,selection,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_10,,,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under <e1>water vapour resistance</e1> <e2>200 Watts per room</e2>.",equal,synthetic
+66b3628a-f0ee-4bc7-93c8-2ae0145a2e78,"In a room with no openable window, an intermittent extract fan should be provided with controls which continue to operate the fan for at least 15 minutes after the room is vacated.",{'ID': '83_UK_DocF_V1_Ventilation'},"In a <e1>room</e1> with no openable window, an <e2>intermittent extract fan</e2> should be provided with controls which continue to operate the fan for at least 15 minutes after the room is vacated.",necessity,annotated
+4f2b56cb-9852-4406-bbea-31f426fb4910,"replacing a heating system including the heating appliance, pipework and heat emitters), the energy performance of the whole system should be assessed, and the results documented and handed over to the building owner with the manufacturers supporting literature.",{'ID': '397_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>replacing</e1> a heating system including the <e2>heating appliance</e2>, pipework and heat emitters), the energy performance of the whole system should be assessed, and the results documented and handed over to the building owner with the manufacturers supporting literature.",none,annotated
+f9de28ac-45bb-4400-9d9f-8afee73bd2e3_6,,,"The <e1>emission rate</e1> should not exceed <e2>1,000 millimetres</e2> of dwelling floor area.",less-equal,synthetic
+c0a6d35c-cc20-428b-941d-c3e3e6365c74_6,,,"In a tier that is uninterrupted by cross-gangways, and where the <e1>heat emission capacity</e1> exceeds <e2>0.9 metres</e2>, use a maximum number of steps of 40.",greater,synthetic
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a <e1>new</e1> <e2>building</e2>, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",selection,annotated
+5e226793-2805-41b0-bcb6-49319afaefc7,"If the building has a floor area greater than 150m2, heating should be split into different heating zones and each zone should have separate controls for timing and temperature demand.",{'ID': '258_UK_DocM_V2_AccessAndUseOfBuildings'},"If the building has a floor area greater than 150m2, <e1>heating</e1> should be <e2>split into different heating zones and each zone should have separate controls for timing and temperature demand</e2>.",necessity,annotated
+99a53f17-48cb-4012-a47b-700761e0983b_6,,,Where a new building which is not a residential building or a mixed-use building has more than 10 parking spaces (a) <e1>0.05</e1> of those <e2>vapour barriers</e2> must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,equal,synthetic
+2702a3b3-b2a8-4457-86e8-3e7de2498dc3,landing call buttons are located between 900mm and 1100mm from the floor of the landing and at least 500mm from any return wall.,{'ID': '185_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>landing call buttons</e1> are <e2>located between 900mm and 1100mm from the floor of the landing and at least 500mm from any return wall</e2>.,necessity,annotated
+2f8d4247-e53b-49ae-bd26-c4f1765eaee8_10,,,"Extract air of <e1>fire compartmenting requirement</e1> <e2>1,200 MJ/m2</e2>, 3 and 4 shall not be used as recirculation air.",equal,synthetic
+193be0e3-dfbb-4e04-ba58-1ae1ed44729b,Consideration should be given to providing an area next to certain seats for an assistance dog to rest.,{'ID': '131_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Consideration</e1> should be <e2>given to providing an area next to certain seats for an assistance dog to rest</e2>.,necessity,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479_0,,,Individual flights are: for gradients up to 1:15 not more than 10m long; for gradients up to 1:12 not more than <e1>0.8 metres</e1> <e2>anthracite figure</e2>.,less-equal,synthetic
+4d80c4d1-08ee-481a-9f9c-e9151ce1094d,"The area of windows, roof windows, rooflights and doors should not exceed 25 of the total floor area of the dwelling.",{'ID': '421_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The <e1>area</e1> of windows, roof windows, rooflights and doors should not exceed <e2>25</e2> of the total floor area of the dwelling.",less-equal,annotated
+c7035b48-7244-40a9-a70e-1d244caf72ac,"The same approved calculation tool must be used to calculate the target primary energy rate, target emission rate and target fabric energy efficiency rate and the dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate.",{'ID': '56_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The same approved <e1>calculation tool</e1> must be used to calculate the target primary energy rate, target emission rate and target fabric energy efficiency rate and the dwelling primary energy rate, dwelling emission rate and <e2>dwelling fabric energy efficiency rate</e2>.",none,annotated
+8bb9aee2-a950-4a65-a715-287035906789,"Spaces of a non-residential building and common spaces of a residential building as well as the fixtures, fittings and fixed equipment in them shall be suitable for persons with mobility and functional impairment.",{'ID': '27_Finnish_Accessibility'},"Spaces of a <e1>non-residential building</e1> and common spaces of a residential building as well as the <e2>fixtures, fittings and fixed equipment</e2> in them shall be suitable for persons with mobility and functional impairment.",part-of,annotated
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a <e1>new</e1> building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be <e2>fitted with a floor drain</e2> shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",none,annotated
+c0a6d35c-cc20-428b-941d-c3e3e6365c74_4,,,"In a tier that is uninterrupted by cross-gangways, and where the pitch exceeds 25, use a <e1>glued in position</e1> number of steps of <e2>E</e2>.",equal,synthetic
+7e34700e-92de-4b00-a820-f4085a2e186c_2,,,"If the free gap between facing walls of adjacent glazed balconies or the <e1>internal temperature</e1> of the wall to the window of an adjacent fire compartment is less than <e2>1.501kWhPE/kWh</e2>, the wall in question must be class EI 15.",less,synthetic
+3ec0e36a-0227-4b76-9fd5-7a2f77877d99,A building that contains both living accommodation and space for commercial purposes (e.g. for a workshop or office) should be treated as a dwelling if the commercial part can be reverted to domestic use.,{'ID': '23_UK_DocM_V2_AccessAndUseOfBuildings'},A <e1>building</e1> that contains both <e2>living accommodation</e2> and space for commercial purposes (e.g. for a workshop or office) should be treated as a dwelling if the commercial part can be reverted to domestic use.,part-of,annotated
+793cb939-b3d9-46eb-ae65-71a4d5c8031b,Where the parking is within the private curtilage of the dwelling (but not within a carport or garage) at least one space is a standard parking bay that can be widened to 3.3m.,{'ID': '43_UK_DocM_V1_AccessAndUseOfBuildings'},Where the <e1>parking</e1> is within the <e2>private curtilage</e2> of the dwelling (but not within a carport or garage) at least one space is a standard parking bay that can be widened to 3.3m.,part-of,annotated
+53e31e26-a39b-4047-a86e-bdb8021413e8_8,,,Window handles on windows that open outwards are not more than <e1>800 millimetres</e1> <e2>both sides</e2> when the window is at its maximum openable angle.,less-equal,synthetic
+01008f69-874b-443e-bcb2-2f5630280049_1,,,"If stairs are used only as an emergency exit and if they lead to spaces in a dwelling or accommodation facility other than those that are necessary for living, the <e1>U-value</e1> may be no more than <e2>90</e2> and the tread must be no less than 220 millimetres.",less-equal,synthetic
+dcc583b1-8c4c-42cf-a1ed-e8907de56254_7,,,"The <e1>seasonal energy efficiency ratio</e1> of the indoor steps of other spaces intended for everyday use may be no more than <e2>2,100 millimetres</e2>, and the tread must be no less than 270 millimetres.",less-equal,synthetic
+ae098b28-f01d-44df-b601-b7ac7631101d,"On stairs and ramps, a handrail must be installed for the entire length and on both sides of the structure.",{'ID': '54_Finnish_SafetyOfUse'},"On stairs and ramps, a handrail must be installed for the entire length and on <e1>both sides</e1> of the <e2>structure</e2>.",part-of,annotated
+ae098b28-f01d-44df-b601-b7ac7631101d,"On stairs and ramps, a handrail must be installed for the entire length and on both sides of the structure.",{'ID': '54_Finnish_SafetyOfUse'},"On <e1>stairs</e1> and ramps, a handrail must be installed for the entire length and on both sides of the <e2>structure</e2>.",part-of,annotated
+48133b44-eac2-44e2-b2df-c52243e9f7ea,"NOTE: For example, if the total system output is made up of three equally sized boilers, at 15% of system output the lead boiler will be operating at 45% of its rated output with the other two boilers switched off.",{'ID': '244_UK_DocM_V2_AccessAndUseOfBuildings'},"NOTE: For example, if the total system output is made up of three equally sized boilers, at 15% of <e1>system output</e1> the <e2>lead boiler</e2> will be operating at 45% of its rated output with the other two boilers switched off.",part-of,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_2,,,"If the air flows of <e1>height</e1> <e2>3</e2> and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+f0c72b35-5a0a-4554-8713-96f6f73a67f1_9,,,A cube with <e1>Extract</e1> of no more than <e2>0.06 m2</e2> may pass between the lower edge of a barriers protective part and the landing or the upper surface or edge of a step.,less-equal,synthetic
+87c9cfa3-8093-497d-be10-dc054abe7062,"For common leaf lintels, the base plate should not be continuous and the lintel core should be insulated.",{'ID': '164_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For <e1>common</e1> <e2>leaf lintels</e2>, the base plate should not be continuous and the lintel core should be insulated.",selection,annotated
+164122ed-c7ac-4cf8-8a54-3d56c144f78d,"In general, the findings indicate that there should be at least the same number of WCs (for women) as urinals (for men) and for some building types, e.g. large retail buildings, at least twice as many.",{'ID': '172_UK_DocM_V2_AccessAndUseOfBuildings'},"In general, the findings indicate that there should be at least the same <e1>number</e1> of WCs (for women) as urinals (for men) and for some building types, e.g. large retail buildings, <e2>at least twice as many</e2>.",none,annotated
+76acc6bd-50c0-4f3f-b015-42e171ec6ce7_6,,,"<e1>1,500  millimetres</e1> <e2>ventilation unit room</e2> must be installed.",equal,synthetic
+203faa23-7b71-47c9-a6e5-2333ac45389e,"The riser of the indoor steps of dwelling units and living quarters  may  be  no  more  than  190  millimetres,  and  the  tread  must  be  no  less  than  250 millimetres.",{'ID': '22_Finnish_SafetyOfUse'},"The riser of the <e1>indoor steps</e1> of <e2>dwelling units</e2> and living quarters may be no more than 190 millimetres, and the tread must be no less than 250 millimetres.",part-of,annotated
+ffbc85cb-4301-4bcb-9a56-7487c95cf16d,Only the proportion of openings which can be opened with a very low risk of occupants falling from height should be considered to form part of the overheating mitigation strategy.,{'ID': '83_UK_DocO_Overheating'},Only the <e1>proportion</e1> of <e2>openings</e2> which can be opened with a very low risk of occupants falling from height should be considered to form part of the overheating mitigation strategy.,part-of,annotated
+103f99ad-884b-4bae-9f22-ccb1c5bc3d26_1,,,"In an open garage of no more than <e1>0.136kgCO2/kWh</e1> <e2>door or gate</e2>, the maximum area may be used as the surface area of the storeys, even though the driveways between the various storeys are combined.",less-equal,synthetic
+81314489-dcd9-410f-9b15-595b87e7c8f9_5,,,"The resilient layer should be timber sheathing at least <e1>600kg/m3</e1> <e2>design value</e2>, expanded metal or a similar resilient material.",greater-equal,synthetic
+6d9a1e8e-6fe7-4234-951a-96fdc4598bd7,"If parking spaces are provided for a building, an adequate number of them, but at least one, shall be intended for the use of a person with mobility and functional impairment.",{'ID': '12_Finnish_Accessibility'},"If parking spaces are provided for a building, an adequate number of <e1>them</e1>, but at least <e2>one</e2>, shall be intended for the use of a person with mobility and functional impairment.",greater-equal,annotated
+29c431ee-ea93-491d-ab13-06418d93c488_0,,,"If <e1>distance of the uppermost floor level from the entry level</e1> is greater than <e2>23C</e2>, manual control is acceptable.",greater,synthetic
+2fad9e0f-fa0d-4a6b-9c63-152ef8828c4d_10,,,An upstand built on site should not exceed a <e1>Level differences</e1> of <e2>0.055555556</e2>.,less-equal,synthetic
+13a437c0-918c-47f2-85bd-b80dd69eb027_1,,,"There are no <e1>building primary energy rate</e1> on the <e2>drop</e2> of display windows and similar glazing, but for new buildings their impact must be taken into account in the calculation of primary energy and CO2 emissions.",not-part-of,synthetic
+8421f806-70f2-46a9-a308-90a40da3541d_2,,,"Where the <e1>total supply air flow</e1> of the approach, whether over its whole length or in part, is <e2>2 metres</e2> or steeper, that part of the approach should be designed as ramped access.",greater-equal,synthetic
+b0e99ac5-9cbc-4beb-b8ff-85383ae70ea8,"The approach route should be safe and convenient, adopt the shallowest gradient that can reasonably be achieved and be step-free, irrespective of the storey on which the dwelling is located.",{'ID': '40_UK_DocM_V1_AccessAndUseOfBuildings'},"The <e1>approach route</e1> should be safe and convenient, adopt the shallowest gradient that can reasonably be achieved and be step-free, <e2>irrespective of the storey on which the dwelling is located</e2>.",selection,annotated
+0da52584-1b37-48b5-840f-3795ae695275_1,,,the minimum clear dimensions of the platform are: <e1>50mm</e1> <e2>fire load</e2> and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+46ee0eda-086a-40ab-8e8f-bfa4c85abd49,"If the indoor access route leading to an evacuation area in a non-residential building is via the indoor stairs in the area, these stairs must be wide enough that they can be used to transport an immobile individual on a stretcher.",{'ID': '16_Finnish_SafetyOfUse'},"If the indoor <e1>access route</e1> <e2>leading to an evacuation area in a non-residential building</e2> is via the indoor stairs in the area, these stairs must be wide enough that they can be used to transport an immobile individual on a stretcher.",selection,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",{'ID': '84_Finnish_Health-IndoorClimateAndVentilation'},"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under <e1>category</e1> <e2>2</e2>.",equal,annotated
+0cafda73-ee3a-4a99-a224-2d142de63618,"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",{'ID': '238_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a wet <e1>heating system</e1> is either: a. newly installed b. fully replaced in an <e2>existing</e2> building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",none,annotated
+922bf8df-3a70-4f45-8c04-200b638d3b3c_5,,,The cold water pipe shall be designed and installed so that the <e1>total air flow</e1> in the cold water system may not exceed <e2>9mm</e2>.,less-equal,synthetic
+74002ed3-548e-4e2f-8835-be76e643c67d_6,,,"NOTE 2: Double doors effectively provide nibs where each leaf is at least <e1>1,500 millimetres</e1> <e2>side</e2>.",greater-equal,synthetic
+5869233a-4fc0-48bf-9007-2b0c9a169fef,"A building shall, if its size, number of storeys or an intended purpose of a premises within the building so requires, be divided into fire compartments in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",{'ID': '100_Finnish_FireSafety'},"A building shall, if its size, <e1>number of storeys</e1> or an intended purpose of a premises within the building so <e2>requires</e2>, be divided into fire compartments in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",selection,annotated
+ff3e8f86-1542-4f54-a776-cfdc8482bad7,The seasonal energy efficiency ratio of an air conditioner working in cooling mode should be a minimum of 4.0.,{'ID': '332_UK_DocL_V1_ConsrvationOfFuelAndPower'},The seasonal energy efficiency ratio of an <e1>air conditioner</e1> <e2>working in cooling mode</e2> should be a minimum of 4.0.,selection,annotated
+3121fe90-27db-405e-a42a-df3cd22ee176_0,,,"Where necessary, <e1>1,500 millimetres</e1><e2>living accommodation</e2>, one above the other, must be installed in order to take into account children and users of wheelchairs.",equal,synthetic
+5fe7997a-7e99-485c-89b3-7912d7c8d44d,"If the total flow rate cannot be achieved through all the terminals, then the fan speed should be increased.",{'ID': '199_UK_DocF_V1_Ventilation'},"If the total flow rate <e1>cannot be achieved through all the terminals</e1>, then the fan <e2>speed</e2> should be increased.",none,annotated
+baee716c-b8c2-4500-b4de-63fa11f007b1_9,,,A minimum of <e1>01:08:00</e1> in five of the remaining <e2>text</e2> must have access to cable routes.,greater-equal,synthetic
+9691451a-57d5-484f-a346-0f83b59f7ae0,"Refreshment facilities, such as restaurants and bars, should be designed so that they can be reached and used by all people independently or with companions.",{'ID': '137_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Refreshment facilities</e1>, such as <e2>restaurants</e2> and bars, should be designed so that they can be reached and used by all people independently or with companions.",selection,annotated
+825053cb-af5d-43a9-b59b-e2a5ae78ea73_9,,,The <e1>topography</e1> of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the <e2>building emission rate</e2> of dwellings in the residential building; b. the number of associated parking spaces.,greater,synthetic
+c2c49207-78b3-42b0-8b61-ad506f5a80e2,"In hard water areas, suitable measures should be taken to treat the feed water to water heaters and the hot water circuit of combination boilers to reduce lime-scale accumulation.",{'ID': '381_UK_DocL_V1_ConsrvationOfFuelAndPower'},"In hard water areas, suitable <e1>measures</e1> should be taken to <e2>treat the feed water to water heaters and the hot water circuit of combination boilers to reduce lime-scale accumulation</e2>.",selection,annotated
+99a53f17-48cb-4012-a47b-700761e0983b_11,,,Where a new building which is not a residential building or a mixed-use building has more than <e1>180 millimetres</e1> <e2>cooker</e2> (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,greater,synthetic
+9fd15b82-fc32-4364-8724-f1ef14f0c047_2,,,The cooker hood should <e1>surface</e1> at least the <e2>distance of the basement storey floor from the entry level</e2> of the cooker.,greater-equal,synthetic
+a235c68f-ae44-4770-b005-4e9d7b659eb7_5,,,All cavity walls should have leaves at least <e1>5m</e1> <e2>wide</e2> and cavities at least 50mm wide.,greater-equal,synthetic
+31e6f85a-97ea-4224-9144-bc3d1daad96d,Consideration should be given to providing a low level urinal for children in male washrooms.,{'ID': '174_UK_DocM_V2_AccessAndUseOfBuildings'},Consideration should be given to providing a low level urinal <e1>for children</e1> in <e2>male washrooms</e2>.,none,annotated
+f7935bb4-9e5f-4e91-bbf1-54e45c1ef24c,A building with a height exceeding 9 metres must be equipped with anchoring structures for safety lines.,{'ID': '127_Finnish_SafetyOfUse'},A <e1>building</e1> with a height exceeding 9 metres must be equipped with anchoring structures for <e2>safety lines</e2>.,part-of,annotated
+6ec243f2-9294-4b7c-89a4-1c46e4a69cc9,"If site constraints necessitate an approach of 1:20 or steeper, an approach incorporating ramped access should be provided.",{'ID': '49_UK_DocM_V2_AccessAndUseOfBuildings'},"If site <e1>constraints</e1> necessitate an approach of 1:20 or steeper, an <e2>approach</e2> incorporating ramped access should be provided.",none,annotated
+2ff58135-b89d-40d1-a145-51aad9e5a942_2,,,"The landing in front of the outside door shall be at least <e1>180 millimetres</e1> <e2>that</e2> and at least 1,500 millimetres long.",greater-equal,synthetic
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_2,,,"The wall ties should have a horizontal spacing of 900mm and a vertical spacing of 450mm, or alternatively should be spaced such that the <e1>maximum capacity</e1> is not less than <e2>25mm</e2>.",greater-equal,synthetic
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c_1,,,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding <e1>01:08:00</e1> <e2>access routes</e2> is EI 30; however, minor sealing parts and penetrations may be class E 15.",greater,synthetic
+371e1755-8bb5-456e-bf66-5a50f4c19d59,"Where there is full-height structural guarding, if you provide a second (lower) handrail, the vertical height from the pitch line of the steps (or the surface of the ramp) to the top of the second (lower) handrail should be 600mm.",{'ID': '50_UK_DocK_ProtectionFromFalling'},"Where there is full-height structural guarding, if you provide a second (lower) handrail, the <e1>vertical</e1> <e2>height</e2> from the pitch line of the steps (or the surface of the ramp) to the top of the second (lower) handrail should be 600mm.",selection,annotated
+76acc6bd-50c0-4f3f-b015-42e171ec6ce7_5,,,<e1>50 m2</e1> <e2>temperature control</e2> must be installed.,equal,synthetic
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab_10,,,"If the <e1>efficiency</e1> of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds <e2>300mm</e2> of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",greater,synthetic
+d04d6702-5170-4b50-9bda-7367a24e9322,"NOTE: The network distribution point could be in a cabinet, a box mounted on a wall or on a telegraph pole.",{'ID': '5_UK_DocR_V1_InfrastructureForElectircalCommunications'},"NOTE: The <e1>network distribution point</e1> could be in a cabinet, a <e2>box</e2> mounted on a wall or on a telegraph pole.",necessity,annotated
+f420ae57-5656-4558-b1a3-1079e46bf6cc_6,,,"In the case of the storey-level door of a dwelling, or if the <e1>layers</e1> through the door exceeds <e2>25mm</e2>, doors must open in the direction of the exit.",greater,synthetic
+84cd76d7-e5d0-4f39-94bc-0236c65d533a_1,,,"in residential buildings of not more than two storeys, one exit of no less than <e1>two years</e1> in <e2>total cost</e2> is permitted.",greater-equal,synthetic
+1d18f0c9-31e5-43ee-8f16-e4fa607c5cd9,"The same approved calculation tool must be used to calculate the target primary energy rate, the target emission rate, the building primary energy rate and the building emission rate.",{'ID': '51_UK_DocM_V2_AccessAndUseOfBuildings'},"The same approved calculation tool must be <e1>used to calculate</e1> the target primary energy rate, the target emission rate, the building primary energy rate and the <e2>building emission rate</e2>.",selection,annotated
+517253f8-98b1-4821-8901-75124d3237db,"Consideration should be given to the provision of a second handrail on stairs in a wide range of building types, and particularly in schools, for use by children and people of short stature.",{'ID': '59_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Consideration</e1> should be given to the provision of a second handrail on stairs in a <e2>wide range of building types</e2>, and particularly in schools, for use by children and people of short stature.",necessity,annotated
+baee716c-b8c2-4500-b4de-63fa11f007b1_5,,,A minimum of <e1>400 millimetres</e1> in five of the remaining <e2>Solid walls</e2> must have access to cable routes.,greater-equal,synthetic
+0ea1e862-2434-4fc8-97a2-b076c992ef20,"The width of an exit must be at least 1,200 millimetres and its free height must be at least 2,100 millimetres.",{'ID': '214_Finnish_FireSafety'},"The width of an <e1>exit</e1> must be at least 1,200 millimetres and its free <e2>height</e2> must be at least 2,100 millimetres.",part-of,annotated
+457ecdc0-8247-4ad4-9beb-3b7a31cfa0fd,"All public areas, including lavatory accommodation, public telephones and external terraces should be accessible.",{'ID': '138_UK_DocM_V2_AccessAndUseOfBuildings'},"All <e1>public areas</e1>, including lavatory accommodation, public <e2>telephones</e2> and external terraces should be accessible.",part-of,annotated
+2f8d4247-e53b-49ae-bd26-c4f1765eaee8,"Extract air of categories 2, 3 and 4 shall not be used as recirculation air.",{'ID': '73_Finnish_Health-IndoorClimateAndVentilation'},"Extract air of <e1>categories</e1> 2, <e2>3</e2> and 4 shall not be used as recirculation air.",equal,annotated
+8e9ef8dc-18bd-4877-98cd-556aa4adee8f,"Reasonable provision shall be made for the conservation of fuel and power in buildings by: (a) limiting heat gains and losses (i) through thermal elements and other parts of the building fabric; and (ii) from pipes, ducts and vessels used for space heating, space cooling and hot water services; (b) providing fixed building services which (i) are energy efficient to a reasonable standard; (ii) have effective controls; and (iii) are commissioned by testing and adjusting as necessary to ensure they use no more fuel and power than is reasonable in the circumstances.",{'ID': '431_UK_DocM_V2_AccessAndUseOfBuildings'},"Reasonable provision shall be made for the <e1>conservation of fuel and power</e1> in buildings by: (a) limiting heat gains and losses (i) through thermal elements and other parts of the building fabric; and (ii) from pipes, ducts and vessels used for space heating, space cooling and hot water services; (b) providing fixed building services which (i) are energy efficient to a reasonable standard; (ii) have effective controls; and (iii) are <e2>commissioned by testing and adjusting as necessary to ensure they use no more fuel and power than is reasonable in the circumstances</e2>.",none,annotated
+72d7716f-7e3e-442c-9e42-14d4b19e18e3_8,,,A <e1>Consideration</e1> that is being connected to a new building should not have a <e2>energy consumption</e2> for delivered heat to the building which is greater than 0.350kgCO2/kWh.,not-part-of,synthetic
+f6add908-4d45-4b3e-83a6-369f6c36c037_10,,,"Door rails, stiles and muntins should be at least <e1>55</e1> <e2>calculations</e2>.",greater-equal,synthetic
+a86b58e8-046f-44b7-8e1b-00c876c8c647_9,,,"Parapets in <e1>integrity</e1> A to <e2>230mm</e2> and panel parts of walls acting as parapets, as well as their fasteners, shall be designed to the concentrated load Qk = 0.3 kN acting on a random spot.",less-equal,synthetic
+a2bf4b81-52eb-48c0-b753-ed5e939612bf,Waterproofing or water pressure barrier must be located on the outer surface of the exterior wall structure against the ground or inside the exterior thermal insulation facing the ground.,{'ID': '87_Finnish_Health-Humidity'},<e1>Waterproofing</e1> or water pressure barrier must be <e2>located on the outer surface of the exterior wall structure against the ground or inside the exterior thermal insulation facing the ground</e2>.,necessity,annotated
+84cd76d7-e5d0-4f39-94bc-0236c65d533a,"in residential buildings of not more than two storeys, one exit of no less than 900 millimetres in width is permitted.",{'ID': '217_Finnish_FireSafety'},"in residential buildings of not more than <e1>two</e1> storeys, one <e2>exit</e2> of no less than 900 millimetres in width is permitted.",none,annotated
+5577528f-8fa0-4ca3-96f6-ea418091cb86,The side edges of stairs and landings must be fitted with a raised camber to prevent slipping over the edge if a cube measuring more than 50 millimetres in width is able to pass through the opening between the plane level and the handrail or wall.,{'ID': '32_Finnish_SafetyOfUse'},The side edges of stairs and landings must be <e1>fitted with a raised camber to prevent slipping over the edge</e1> if a <e2>cube</e2> measuring more than 50 millimetres in width is able to pass through the opening between the plane level and the handrail or wall.,none,annotated
+38cd3221-7fc9-4462-be20-78b16a4309d3_6,,,The <e1>reference value</e1> of openings in the newly created dwelling should not be more than <e2>1400mm</e2> of the total floor area.,less-equal,synthetic
+26f33f06-e967-4d55-9e73-30990f52ac82,"Loft hatches: where the roof is insulated at ceiling level, hatches should be suitably designed and installed to ensure optimum airtightness.",{'ID': '189_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Loft hatches: where the <e1>roof</e1> is <e2>insulated at ceiling level</e2>, hatches should be suitably designed and installed to ensure optimum airtightness.",selection,annotated
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c_11,,,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding <e1>50 m</e1> <e2>renewable technology</e2> is EI 30; however, minor sealing parts and penetrations may be class E 15.",greater,synthetic
+3cbfb816-4071-496e-aec2-87d424df047f,Wheelchair users and ambulant disabled people should be able to wash or bathe either independently or with assistance from others.,{'ID': '181_UK_DocM_V2_AccessAndUseOfBuildings'},Wheelchair users and <e1>ambulant</e1> disabled <e2>people</e2> should be able to wash or bathe either independently or with assistance from others.,selection,annotated
+8207751f-13b8-4fe3-9bfe-4423093d4905,A  building  with  dwellings  or  accommodation  or  patient  rooms  shall  be  designed  and implemented so that the reverberation time of the staircase and exit route is no more than 1.3 seconds.,{'ID': '26_Finnish_AcousticEnvironment'},A <e1>building</e1> with <e2>dwellings</e2> or accommodation or patient rooms shall be designed and implemented so that the reverberation time of the staircase and exit route is no more than 1.3 seconds.,part-of,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_11,,,"If the air flows of <e1>performance</e1> <e2>28 metres</e2> and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+835d8fad-7a27-4299-aa38-a5b1771a6779,"In large building complexes, such as retail parks and large sports centres, there should be one wheelchair-accessible unisex toilet capable of including an adult changing table.",{'ID': '178_UK_DocM_V2_AccessAndUseOfBuildings'},"In large <e1>building complexes</e1>, such as retail parks and large <e2>sports centres</e2>, there should be one wheelchair-accessible unisex toilet capable of including an adult changing table.",selection,annotated
+7d877df3-9aa7-4dff-a64d-5356a66c944d,"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a width exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",{'ID': '59_Finnish_SafetyOfUse'},"In public outdoor and indoor spaces, and in business and <e1>service</e1> <e2>premises</e2>, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a width exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",selection,annotated
+7ca3a924-dd3a-450e-af24-4d456d6c1b32,"Wet room waterproofing must form a whole which is impermeable on all waterproofed surfaces as well as on their seams, penetrations and joints.",{'ID': '113_Finnish_Health-Humidity'},"Wet room <e1>waterproofing</e1> must <e2>form a whole which is impermeable on all waterproofed surfaces as well as on their seams, penetrations and joints</e2>.",necessity,annotated
+56b0e4bf-81d7-4ab9-855b-780ef2f0b1d3_10,,,Storage premises with a <e1>net heating energy demand</e1> exceeding <e2>10 litres per second per person</e2> are not permitted within the building.,greater,synthetic
+1913381b-a2cc-496e-9168-82ccf2a01d50_1,,,"In connection with repair and alteration work, the heat emitters connected to the domestic hot water ring duct may be replaced so that the <e1>cold side</e1> of the heat emitters to be installed does not exceed <e2>24 metres</e2>.",less-equal,synthetic
+cc72106e-9e7f-47cf-8a95-0173a8305dad_4,,,"In a new building, the crawl space <e1>exposure coefficient</e1> must be <e2>100</e2> on average at the minimum.",greater-equal,synthetic
+992e8f11-81ac-4d2f-b7d1-60e46b4b7261,Wheelchair accessible dwellings must also provide both a level access shower and a bath.,{'ID': '108_UK_DocM_V1_AccessAndUseOfBuildings'},<e1>Wheelchair accessible</e1> dwellings must also provide both a level access shower and a <e2>bath</e2>.,none,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_7,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for <e1>Unit length</e1> <e2>two </e2> and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",equal,synthetic
+7d877df3-9aa7-4dff-a64d-5356a66c944d_5,,,"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a <e1>indoor and outdoor conditions</e1> exceeding <e2>5m</e2> and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",greater,synthetic
+2319724e-2fd4-463b-bb59-0972073dc55a,"Both before and after a newly constructed dwelling is built, a notice must be given to the building control body of the calculations.",{'ID': '44_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Both before and after a newly constructed <e1>dwelling</e1> is built, a notice must be <e2>given to the building control body of the calculations</e2>.",none,annotated
+d925c189-860a-4fcb-ae88-d1cf8cc14fb8_6,,,"The tread of steps in covered or heated outdoor staircases must be no less than 300 millimetres, and the <e1>differences</e1> may be no more than <e2>8.5m2</e2>.",less-equal,synthetic
+6c789809-b1b8-429a-8fe2-8ce16f8a4b54,Air flows in the continuous working area of a parking garage for motor vehicles shall be designed so that the instantaneous carbon monoxide concentration does not exceed 7 mg/m3 (6 ppm).,{'ID': '62_Finnish_Health-IndoorClimateAndVentilation'},Air flows in the continuous working area of a parking garage for motor vehicles shall be designed so that the <e1>instantaneous carbon monoxide concentration</e1> does not exceed <e2>7 mg/m3 (6 ppm)</e2>.,less-equal,annotated
+01008f69-874b-443e-bcb2-2f5630280049,"If stairs are used only as an emergency exit and if they lead to spaces in a dwelling or accommodation facility other than those that are necessary for living, the riser may be no more than 220 millimetres and the tread must be no less than 220 millimetres.",{'ID': '24_Finnish_SafetyOfUse'},"If stairs are used only as an emergency exit and if they lead to spaces in a dwelling or accommodation facility other than those that are necessary for living, the <e1>riser</e1> may be no more than <e2>220 millimetres</e2> and the tread must be no less than 220 millimetres.",less-equal,annotated
+3f7c10d1-d801-4351-bc85-187cf8cffeb3,The water vapour resistance and air tightness of external walls and their various layers as well as the structures attached to the external wall and joints to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,{'ID': '96_Finnish_Health-Humidity'},The water vapour resistance and air tightness of <e1>external</e1> walls and their various layers as well as the structures attached to the external wall and joints to the <e2>external</e2> wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,none,annotated
+2f8d4247-e53b-49ae-bd26-c4f1765eaee8_0,,,"Extract air of <e1>design solar load</e1> <e2>1.501kWhPE/kWh</e2>, 3 and 4 shall not be used as recirculation air.",equal,synthetic
+38cd3221-7fc9-4462-be20-78b16a4309d3_8,,,The <e1>total minimum width</e1> of openings in the newly created dwelling should not be more than <e2>0.2</e2> of the total floor area.,less-equal,synthetic
+15c28729-22a9-4992-b43a-bdcf457c0526,"Both before and after a newly constructed building is built, a notice must be given to the building control body of the calculations.",{'ID': '45_UK_DocM_V2_AccessAndUseOfBuildings'},"Both before and after a newly constructed <e1>building</e1> is <e2>built</e2>, a notice must be given to the building control body of the calculations.",selection,annotated
+0085ecdd-f2f0-45f5-948d-ded697c69866,"In addition, on one side of the toilet seat there shall be a free space of at least 800 millimetres.",{'ID': '44_Finnish_Accessibility'},"In addition, on one <e1>side</e1> of the toilet seat there shall be a free space of at least <e2>800 millimetres</e2>.",none,annotated
+2af8ee5f-9d05-4023-9365-d093ebdfba1f,"Where building work is carried out in a kitchen or bathroom, any existing fans (including cooker hoods, where they extract to the outside) should be retained or replaced.",{'ID': '168_UK_DocF_V1_Ventilation'},"Where building work is carried out in a kitchen or bathroom, any <e1>existing</e1> <e2>fans (including cooker hoods, where they extract to the outside)</e2> should be retained or replaced.",selection,annotated
+3c28dbd6-8a3d-4ede-ae08-89e4b5d69d60_9,,,The approach route is a minimum of 900mm wide with a maximum <e1>projection</e1> of <e2>60</e2>.,less-equal,synthetic
+35cacecf-06dc-4b0f-aadb-db2ee05518c7_2,,,The area of windows and roof windows (but excluding display windows) <e1>lockable in both horizontal and vertical sewers</e1> exceeds <e2>five</e2> of the facade area.,greater,synthetic
+38745b5e-4dea-43fe-9378-5befa5a2399d,A copy of the completed commissioning sheet should be given to the owner of the building.,{'ID': '99_UK_DocF_V2_Ventilation'},A <e1>copy</e1> of the completed commissioning sheet should be <e2>given to the owner of the building</e2>.,necessity,annotated
+043258d7-d35e-42d9-87c5-b83565c39ad6,"Before elements are concealed by subsequent work, an onsite audit should be undertaken to confirm that the designed details have been constructed.",{'ID': '133_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Before <e1>elements</e1> are concealed by subsequent work, an onsite <e2>audit</e2> should be undertaken to confirm that the designed details have been constructed.",none,annotated
+9618a274-45da-4e3e-87f0-21c2bfae4a8e_7,,,"A guardrail must be used at points with a <e1>shape</e1> of over <e2>0.3</e2>, if these can be accessed by children.",greater,synthetic
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c_7,,,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be <e1>insulating performance</e1> <e2>100</e2>.",equal,synthetic
+9618a274-45da-4e3e-87f0-21c2bfae4a8e_3,,,"A guardrail must be used at points with a <e1>cross fall</e1> of over <e2>50</e2>, if these can be accessed by children.",greater,synthetic
+e8e5b04a-e794-4933-b846-aefb5457f60b,The toilet seat shall be placed between 200 and 300 millimetres from the rear wall.,{'ID': '57_Finnish_Accessibility'},The <e1>toilet seat</e1> shall be <e2>placed between 200 and 300 millimetres from the rear wall</e2>.,necessity,annotated
+922bf8df-3a70-4f45-8c04-200b638d3b3c,The cold water pipe shall be designed and installed so that the temperature in the cold water system may not exceed 20 degrees Celsius.,{'ID': '59_Finnish_Health-WaterAndSewerage'},The <e1>cold water pipe</e1> shall be designed and installed so that the <e2>temperature</e2> in the cold water system may not exceed 20 degrees Celsius.,none,annotated
+825053cb-af5d-43a9-b59b-e2a5ae78ea73,The total number of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the number of dwellings in the residential building; b. the number of associated parking spaces.,{'ID': '59_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},The <e1>total number</e1> of associated <e2>parking spaces</e2> which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the number of dwellings in the residential building; b. the number of associated parking spaces.,part-of,annotated
+536b172d-ccd1-479a-8136-6ee05db0f264,"Where pipework is above ground, the performance of the pipe insulation should be at least as high as the insulating performance of pipework in the buried part of the system.",{'ID': '205_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where pipework is above ground, the performance of the <e1>pipe</e1> <e2>insulation</e2> should be at least as high as the insulating performance of pipework in the buried part of the system.",part-of,annotated
+33ed3038-99a6-4b2d-906a-a1db21f2d898,"For heating systems in new dwellings, or when a heat generator such as a boiler is replaced in an existing dwelling, each room should be provided with thermostatic room controls.",{'ID': '250_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For heating systems in new dwellings, or when a <e1>heat generator</e1> such as a boiler is replaced in an existing <e2>dwelling</e2>, each room should be provided with thermostatic room controls.",part-of,annotated
+82330d3d-6139-4050-9ca0-946bc982fbb0,The sign should be suitably weatherproof for its location.,{'ID': '119_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},The <e1>sign</e1> should be suitably <e2>weatherproof for its location</e2>.,necessity,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_9,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for <e1>number of wall ties per square metre</e1> <e2>500kW</e2> and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",equal,synthetic
+a2bf4b81-52eb-48c0-b753-ed5e939612bf,Waterproofing or water pressure barrier must be located on the outer surface of the exterior wall structure against the ground or inside the exterior thermal insulation facing the ground.,{'ID': '87_Finnish_Health-Humidity'},Waterproofing or <e1>water pressure barrier</e1> must be <e2>located on the outer surface of the exterior wall structure against the ground or inside the exterior thermal insulation facing the ground</e2>.,necessity,annotated
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_10,,,"The wall ties should have a <e1>distance of the basement storey floor from the entry level</e1> of <e2>7 mg/m3 (6 ppm)</e2> and a vertical spacing of 450mm, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",equal,synthetic
+197b9463-397e-4729-a08d-12739f9db069,"For variable refrigerant flow (VRF) systems, any calculations must include indoor and outdoor conditions, the power input from controls, and indoor units.",{'ID': '283_UK_DocM_V2_AccessAndUseOfBuildings'},"For variable refrigerant flow (VRF) systems, any <e1>calculations</e1> must include indoor and outdoor conditions, the power input from controls, and <e2>indoor units</e2>.",necessity,annotated
+0da52584-1b37-48b5-840f-3795ae695275_8,,,the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where <e1>56 metres</e1> <e2>basement area</e2> are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+f9de28ac-45bb-4400-9d9f-8afee73bd2e3_4,,,The <e1>gradients</e1> should not exceed <e2>220 millimetres</e2> of dwelling floor area.,less-equal,synthetic
+0096a3bf-ac16-4a75-adf9-8c3f4a9b8610_4,,,The smaller <e1>number</e1> of each panel which can be either the width or height of the panel should be <e2>4</e2> or less.,less-equal,synthetic
+e505b13c-7b62-4857-aa2d-544dc986e9c0_10,,,"For dwellings, for external tapered steps and stairs that are part of the building the <e1>continuity</e1> of each step should be a minimum of <e2>three metres</e2>.",greater-equal,synthetic
+e4fb8d18-8dbc-4351-a2df-d87f880f476a,The fire resistance time requirement for balconies is half that of the load-bearing structures of the storey.,{'ID': '90_Finnish_FireSafety'},The <e1>fire resistance time requirement</e1> for <e2>balconies</e2> is half that of the load-bearing structures of the storey.,part-of,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479_11,,,Individual flights are: for <e1>service</e1> up to <e2>0.8 metres</e2> not more than 10m long; for gradients up to 1:12 not more than 5m long.,less-equal,synthetic
+d178dd92-6cf3-4f68-a9ba-44b97d74204a,"Staircases must be safe, sufficiently spacious and suitable for their purpose.",{'ID': '13_Finnish_SafetyOfUse'},"<e1>Staircases</e1> must be safe, <e2>sufficiently spacious</e2> and suitable for their purpose.",necessity,annotated
+9952f64d-e0df-4b03-84af-150782f81387_1,,,"For mobility-impaired people, a <e1>heating and cooling systems</e1> of at least <e2>off</e2> is preferred.",greater-equal,synthetic
+528e7551-acfd-4fa6-be24-9c91bd6d7679,The materials and fittings shall be compatible.,{'ID': '149_Finnish_Health-WaterAndSewerage'},The <e1>materials</e1> and fittings shall be <e2>compatible</e2>.,necessity,annotated
+419892bb-5044-4c63-a8ba-7747ad52c23d,"When installing windows, roof windows, rooflights or doors (all of which are controlled fittings), the controlled fitting should be well fitted and reasonably draught-proof.",{'ID': '195_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When installing windows, roof windows, rooflights or <e1>doors</e1> (all of which are controlled fittings), the controlled fitting should be <e2>well fitted</e2> and reasonably draught-proof.",none,annotated
+fb1da22f-8ddb-4399-b441-64dca68da9af_9,,,"If a lift or other device for moving between levels is installed in the exit of an existing building, the dwellings exit may be no less than <e1>20C</e1> <e2>from the top and bottom corners of the door</e2>.",greater-equal,synthetic
+5ba5ffe7-ece8-488a-b461-da66237e7888,"All walls, ducts and boxings to the WC/cloakroom, bathroom and shower room should be strong enough to support grab rails, seats and other adaptations that could impose a load of up to 1.5kN/m2.",{'ID': '54_UK_DocM_V1_AccessAndUseOfBuildings'},"All <e1>walls</e1>, ducts and boxings to the WC/cloakroom, bathroom and <e2>shower room</e2> should be strong enough to support grab rails, seats and other adaptations that could impose a load of up to 1.5kN/m2.",part-of,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479_7,,,Individual flights are: for gradients up to 1:15 not more than 10m long; for <e1>elevation difference</e1> up to <e2>500kW</e2> not more than 5m long.,less-equal,synthetic
+7d35f4c4-fa65-4d68-a974-f54386ca8aee_6,,,"However, a horizontal <e1>Snow</e1> in a protective part must be no higher than <e2>13l/s</e2>.",less-equal,synthetic
+3153d771-404e-4a54-ac05-ed1b75e37506_10,,,"Gangways should not be less than 1100mm <e1>heating plant emission rate</e1> unless used by not more than 50 persons, in which case gangways should be a minimum of <e2>600kg/m3</e2>.",greater-equal,synthetic
+d3fc8c9b-c23a-4188-8723-369caa90453c,"The reference value for a building's total combined window area is 15 of the sum total of the floor  plate areas  of  the  buildings  storeys that  are  fully  or in  part  above  the  ground  but, however, at most 50 of the building's facade area.",{'ID': '124_Finnish_EnergyEfficiency'},"The reference value for a building's total combined window area is 15 of the sum total of the floor plate areas of the <e1>buildings</e1> <e2>storeys</e2> that are fully or in part above the ground but, however, at most 50 of the building's facade area.",part-of,annotated
+8102cb27-2e2a-4008-99d6-a53f5045f6e2,Structures with surfaces exposed to moisture must be resistant to the effects of water.,{'ID': '36_Finnish_Health-Humidity'},Structures with <e1>surfaces</e1> <e2>exposed to moisture</e2> must be resistant to the effects of water.,selection,annotated
+26980508-105c-49db-8595-bf001a48d757_5,,,"In <e1>g-value</e1> with no fixed seats or <e2>showers</e2>, the number of persons shall be calculated to be two persons per square metre.",not-part-of,synthetic
+56166e36-b14b-4632-9767-70b71d335d9c,"When a dwelling undergoes a major renovation, the technical, environmental and economic feasibility of installing high-efficiency alternative systems should be considered.",{'ID': '98_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When a dwelling <e1>undergoes a major renovation</e1>, the technical, <e2>environmental</e2> and economic feasibility of installing high-efficiency alternative systems should be considered.",none,annotated
+a235c68f-ae44-4770-b005-4e9d7b659eb7_6,,,All cavity walls should have leaves at least 90mm thick and cavities at least <e1>230mm</e1> <e2>energy consumption</e2>.,greater-equal,synthetic
+20216261-f56d-4f79-8a46-c781abe19f04,"For new and existing buildings other than dwellings, information should be provided in a new or existing building log book.",{'ID': '98_UK_DocF_V2_Ventilation'},"For new and <e1>existing</e1> <e2>buildings</e2> other than dwellings, information should be provided in a new or existing building log book.",selection,annotated
+2afa8bba-b5ad-4e12-bc27-4beea3fd09b2_0,,,The normal relationship between the <e1>net heating energy demand</e1> of the rise and going is: <e2>0.3</e2> equals between 550mm and 700mm.,equal,synthetic
+c0a6d35c-cc20-428b-941d-c3e3e6365c74,"In a tier that is uninterrupted by cross-gangways, and where the pitch exceeds 25, use a maximum number of steps of 40.",{'ID': '25_UK_DocK_ProtectionFromFalling'},"In a tier that is uninterrupted by cross-gangways, and where the pitch exceeds 25, use a maximum <e1>number</e1> of <e2>steps</e2> of 40.",part-of,annotated
+4d80c4d1-08ee-481a-9f9c-e9151ce1094d_10,,,"The <e1>Air flow rates</e1> of windows, roof windows, rooflights and doors should not exceed <e2>50</e2> of the total floor area of the dwelling.",less-equal,synthetic
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab_1,,,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the <e1>sections</e1> of that installation exceeds <e2>18 dm3/s</e2> of the total cost of the major renovation.",greater,synthetic
+4094b859-b3b4-4035-94cd-8cf47ccbd801_9,,,The <e1>intended purpose</e1> is at least <e2>190  millimetres</e2>.,greater-equal,synthetic
+1913381b-a2cc-496e-9168-82ccf2a01d50,"In connection with repair and alteration work, the heat emitters connected to the domestic hot water ring duct may be replaced so that the heat emission capacity of the heat emitters to be installed does not exceed 200 Watts per room.",{'ID': '67_Finnish_Health-WaterAndSewerage'},"In connection with repair and alteration work, the heat emitters connected to the domestic hot water ring duct may be replaced so that the <e1>heat emission capacity</e1> of the heat emitters to be installed does not exceed <e2>200 Watts per room</e2>.",less-equal,annotated
+8fcdc238-3c30-4659-9303-1b126a39b2cd_5,,,The design solar load should be <e1>final</e1> by at least <e2>600 x 600 millimetres</e2>.,greater-equal,synthetic
+316c89ee-aa42-4e7a-9372-960cf25b3265,Extract ventilation may be by natural means or by mechanical means (e.g. by an extract fan or acentral system).,{'ID': '105_UK_DocF_V2_Ventilation'},Extract ventilation may be by <e1>natural</e1> <e2>means</e2> or by mechanical means (e.g. by an extract fan or acentral system).,selection,annotated
+29232335-402c-4ed9-af74-fd093ac22e28,The natural or mechanical ventilation system of a building shall be strong and its air-tightness shall be at least class B.,{'ID': '95_Finnish_Health-IndoorClimateAndVentilation'},The natural or <e1>mechanical</e1> <e2>ventilation system</e2> of a building shall be strong and its air-tightness shall be at least class B.,selection,annotated
+2f815a08-db3c-48a6-b248-d69aeac870ee_10,,,"the vertical <e1>integrity</e1> is: a. not more than <e2>60</e2>, where there is no liftway enclosure and no floor penetration; b. more than 2m, where there is a liftway enclosure.",less-equal,synthetic
+2c224c59-366d-447f-9ecc-87c119c2db07,"For new dwellings, the commissioning plan should be given to the building control body with the design stage dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate calculations.",{'ID': '374_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For <e1>new</e1> <e2>dwellings</e2>, the commissioning plan should be given to the building control body with the design stage dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate calculations.",selection,annotated
+7e369e4c-7768-4a7a-bd9c-41e2aa037b43,The air flows shall be designed so that the average carbon monoxide concentration in a parking garage for motor vehicles during the hour of use assessed as the most critical does not exceed 35 mg/m3 (30 ppm).,{'ID': '61_Finnish_Health-IndoorClimateAndVentilation'},The air flows shall be designed so that the <e1>average carbon monoxide concentration</e1> in a parking garage for motor vehicles <e2>during the hour of use assessed as the most critical</e2> does not exceed 35 mg/m3 (30 ppm).,selection,annotated
+7d1ada0b-8dcc-4c01-84d7-78b80cb404c9,"If there are not enough associated parking spaces outside of the covered car park to meet the requirement to install electric vehicle charge points, then cable routes should be installed for associated parking spaces within the covered car park.",{'ID': '58_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If there are <e1>not enough</e1> associated <e2>parking spaces</e2> outside of the covered car park to meet the requirement to install electric vehicle charge points, then cable routes should be installed for associated parking spaces within the covered car park.",selection,annotated
+7f3f59a4-fc7e-4b14-8074-384f6cacf548_4,,,"The height of a barrier in a dwellings indoor areas may, however, be at least 0.9 metres if the <e1>side edges</e1> is less than <e2>1.2W/(m2K)</e2>.",less,synthetic
+d43e4877-601c-43eb-9d33-96945754374b,Good acoustic design should be employed to achieve an acoustic environment that is neither too reverberant nor too absorbent so that announcements and conversations can be heard clearly.,{'ID': '99_UK_DocM_V2_AccessAndUseOfBuildings'},Good acoustic design should be employed to achieve an <e1>acoustic environment</e1> <e2>that is neither too reverberant nor too absorbent</e2> so that announcements and conversations can be heard clearly.,selection,annotated
+164122ed-c7ac-4cf8-8a54-3d56c144f78d_8,,,"In general, the findings indicate that there should be at least the same number of <e1>Calibration</e1> as <e2>space</e2> and for some building types, e.g. large retail buildings, at least twice as many.",greater-equal,synthetic
+0da52584-1b37-48b5-840f-3795ae695275_5,,,the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where <e1>0.05</e1> <e2>fire door</e2> are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+dcc583b1-8c4c-42cf-a1ed-e8907de56254_9,,,"The rise of the indoor steps of other spaces intended for everyday use may be no more than 180 millimetres, and the <e1>service life</e1> must be no less than <e2>three</e2>.",greater-equal,synthetic
+493ec553-7761-4d1e-aa98-05d925ddf955_11,,,The <e1>room temperature</e1> of a horizontal hatch must be at least <e2>1100mm</e2>.,greater-equal,synthetic
+60024014-cb6a-4a53-9b12-9497e0a1e5e8,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",{'ID': '85_Finnish_Health-IndoorClimateAndVentilation'},"<e1>Extract air</e1> from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the <e2>vertical</e2> duct.",none,annotated
+984c252b-74f4-4d85-9080-1c8ae1851eca,"If performance requires thicker glass to be used, an equivalent window unit with standard thickness (6mm) glazing should be shown to meet the required standard.",{'ID': '113_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If <e1>performance</e1> requires thicker <e2>glass</e2> to be used, an equivalent window unit with standard thickness (6mm) glazing should be shown to meet the required standard.",necessity,annotated
+f7cfdf57-28f3-4d23-90bf-ec2268e14bac,"Ramps, steps, thresholds and differences in levels in passageways must be clearly indicated using lighting and surface brightness contrasts or warning signs.",{'ID': '65_Finnish_SafetyOfUse'},"<e1>Ramps</e1>, steps, thresholds and differences in levels in passageways must be <e2>clearly indicated using lighting and surface brightness contrasts or warning signs</e2>.",necessity,annotated
+8e9ef8dc-18bd-4877-98cd-556aa4adee8f,"Reasonable provision shall be made for the conservation of fuel and power in buildings by: (a) limiting heat gains and losses (i) through thermal elements and other parts of the building fabric; and (ii) from pipes, ducts and vessels used for space heating, space cooling and hot water services; (b) providing fixed building services which (i) are energy efficient to a reasonable standard; (ii) have effective controls; and (iii) are commissioned by testing and adjusting as necessary to ensure they use no more fuel and power than is reasonable in the circumstances.",{'ID': '431_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Reasonable</e1> provision shall be made for the conservation of fuel and power in buildings by: (a) limiting heat gains and losses (i) <e2>through thermal elements and other parts of the building fabric</e2>; and (ii) from pipes, ducts and vessels used for space heating, space cooling and hot water services; (b) providing fixed building services which (i) are energy efficient to a reasonable standard; (ii) have effective controls; and (iii) are commissioned by testing and adjusting as necessary to ensure they use no more fuel and power than is reasonable in the circumstances.",none,annotated
+6d9a1e8e-6fe7-4234-951a-96fdc4598bd7_6,,,"If parking spaces are provided for a building, an adequate number of <e1>System controls</e1>, but at least <e2>55 degrees Celsius</e2>, shall be intended for the use of a person with mobility and functional impairment.",greater-equal,synthetic
+569c7958-b7d6-4b9c-9dd9-13307e95e59b_11,,,"For ducted systems that are served by fans with a <e1>Unit length</e1> greater than <e2>600 millimetres</e2>, ductwork leakage tests should be carried out.",greater,synthetic
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_5,,,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under <e1>that</e1> <e2>50 millimetres</e2>.",equal,synthetic
+500fc416-e652-4a2c-8dd3-8d9754ea1829,There should be no visible mould on the inner surfaces of external walls of a properly heated building with typical moisture generation.,{'ID': '115_UK_DocF_V2_Ventilation'},There should be no visible mould on the <e1>inner surfaces</e1> of external <e2>walls</e2> of a properly heated building with typical moisture generation.,part-of,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_11,,,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the <e1>feasibility of installing high-efficiency alternative systems</e1> of these must be at least <e2>20C</e2>.",greater-equal,synthetic
+103f99ad-884b-4bae-9f22-ccb1c5bc3d26,"In an open garage of no more than five storeys, the maximum area may be used as the surface area of the storeys, even though the driveways between the various storeys are combined.",{'ID': '110_Finnish_FireSafety'},"In an open garage of no more than five storeys, the maximum <e1>area</e1> may be <e2>used as the surface area of the storeys</e2>, even though the driveways between the various storeys are combined.",necessity,annotated
+37f01a2c-b944-45a2-a7f4-140d8c03d7ac_3,,,"After rebating, frame components should retain at least <e1>1.3 seconds</e1> of <e2>rain-water</e2>.",greater-equal,synthetic
+ec419055-6ed3-4dac-9879-748e2d365a26,"Internal building services: where services penetrate the air barrier, holes should be as small as possible and should be core drilled to limit damage.",{'ID': '180_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Internal building services: where services penetrate the air barrier, <e1>holes</e1> should be as small as possible and should be <e2>core drilled to limit damage</e2>.",necessity,annotated
+5ca184fa-e100-4f97-957d-e37ae944786f,The cost of installing electric vehicle charge points and cable routes is not more than 7% of the total capital cost of the major renovation.,{'ID': '51_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},The <e1>cost</e1> of <e2>installing electric vehicle charge points and cable routes</e2> is not more than 7% of the total capital cost of the major renovation.,selection,annotated
+5ba5ffe7-ece8-488a-b461-da66237e7888,"All walls, ducts and boxings to the WC/cloakroom, bathroom and shower room should be strong enough to support grab rails, seats and other adaptations that could impose a load of up to 1.5kN/m2.",{'ID': '54_UK_DocM_V1_AccessAndUseOfBuildings'},"All walls, ducts and <e1>boxings</e1> to the <e2>WC/cloakroom</e2>, bathroom and shower room should be strong enough to support grab rails, seats and other adaptations that could impose a load of up to 1.5kN/m2.",part-of,annotated
+e21fa967-934e-4a29-a66d-252fdbbf928f_5,,,"If the parasitic energy use is unknown, an <e1>extract air categories</e1> of <e2>1</e2> should be made for any control system.",equal,synthetic
+bfe386ee-8c0b-41d4-9967-6e873edf7229,"Floors and foundations: insulation should be installed tight to the structure, without air gaps between insulation panels and at edges.",{'ID': '148_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Floors and foundations: <e1>insulation</e1> should be <e2>installed tight to the structure</e2>, without air gaps between insulation panels and at edges.",necessity,annotated
+ef561e39-db90-462c-8dde-15fbeae954e5_10,,,A cube with <e1>total minimum width</e1> of no more than <e2>900-1000mm</e2> may pass between the upper edge of the barrier and the protective part.,less-equal,synthetic
+bf798097-bb99-42d0-a73f-8cebab8fbeb8_4,,,"In the entrance halls and other indoor areas of administrative, service and business premises and in assembly areas, the <e1>extract air categories</e1> of the steps must be no more than <e2>E 15</e2> and the tread must be no less than 300 millimetres.",less-equal,synthetic
+baee716c-b8c2-4500-b4de-63fa11f007b1,A minimum of one in five of the remaining parking spaces must have access to cable routes.,{'ID': '83_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},A minimum of <e1>one</e1> in five of the remaining parking spaces must have <e2>access to cable routes</e2>.,necessity,annotated
+46f5be2a-1514-420b-bc39-331fc6e0d2df_5,,,"The dwelling primary energy rate, <e1>flushing</e1> and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the target primary energy rate, <e2>total floor area</e2> and target fabric energy efficiency rate, respectively.",less-equal,synthetic
+53e31e26-a39b-4047-a86e-bdb8021413e8_9,,,Window handles on windows that open outwards are not more than <e1>900 millimetres</e1> <e2>indoor units</e2> when the window is at its maximum openable angle.,less-equal,synthetic
+3724fd47-22f7-432c-81a2-1abcb95c7df2_1,,,"The total number of ventilators installed in a dwellings habitable rooms and kitchens should be no fewer than five, except in <e1>10 kN</e1> <e2>Lifting devices</e2> properties, where there should be no fewer than four.",equal,synthetic
+588857f5-9281-4c32-8d83-c98230d5b934,The use of boards with lapped or tongue and groove edges should be considered.,{'ID': '146_UK_DocL_V1_ConsrvationOfFuelAndPower'},The use of boards with lapped or <e1>tongue and groove</e1> <e2>edges</e2> should be considered.,selection,annotated
+4e4fdf56-c45b-4d89-b18f-7a2f24a41ba9_6,,,"In spaces intended for more than 60 persons, the <e1>allowance</e1> of the access route must be at least <e2>adequate means</e2>.",greater-equal,synthetic
+d925c189-860a-4fcb-ae88-d1cf8cc14fb8_10,,,"The tread of steps in covered or heated outdoor staircases must be no less than 300 millimetres, and the <e1>heat recovery</e1> may be no more than <e2>30% load</e2>.",less-equal,synthetic
+2b60007d-59a3-4a18-a184-89e76ee17454,Masonry construction: external or cavity wall insulation should extend below the damp-proof course (where applicable) and be at least the equivalent of one full block height (215mm) below the underside of the floor structure/slab and beyond the depth of the floor insulation.,{'ID': '161_UK_DocL_V1_ConsrvationOfFuelAndPower'},Masonry construction: <e1>external</e1> or <e2>cavity</e2> wall insulation should extend below the damp-proof course (where applicable) and be at least the equivalent of one full block height (215mm) below the underside of the floor structure/slab and beyond the depth of the floor insulation.,none,annotated
+0a53e4af-84a7-46aa-b28a-cb1d873c8cae,"The type and quality of public address, hearing enhancement and telephone systems should be chosen carefully to ensure intelligibility.",{'ID': '151_UK_DocM_V2_AccessAndUseOfBuildings'},"The <e1>type and quality</e1> of public address, hearing enhancement and telephone systems should be <e2>chosen carefully to ensure intelligibility</e2>.",necessity,annotated
+fa8a6d84-eb99-490e-8169-3c65353fb553_5,,,"For large roofs, where the smaller horizontal dimension of the roof is 50 m or more, and the topography is windswept, the value of the <e1>inaccuracies</e1> shall be at least <e2>15</e2>.",greater-equal,synthetic
+76bf63bd-30f4-440d-81a0-61ca16170f70_2,,,Control should be maximised and heat gain to uninsulated pipes should only be permitted where the <e1>gradient</e1> is less than <e2>190 kN</e2> of the total load.,less,synthetic
+a2f3a871-91d5-4777-95c9-4744792b3a69,"in an existing building, for the principal or main staff entrance or entrances to be accessible, an alternative accessible entrance should be provided.",{'ID': '61_UK_DocM_V2_AccessAndUseOfBuildings'},"in an existing <e1>building</e1>, for the principal or <e2>main staff</e2> entrance or entrances to be accessible, an alternative accessible entrance should be provided.",none,annotated
+8b054fa5-fa6b-40f8-996a-a6dfea855fc3,"The distance between a door that opens onto a landing and the upper edge of the ramp or flight of stairs must be no less than 400 millimetres on the side wall and no less than 1,500 millimetres on the end wall.",{'ID': '33_Finnish_SafetyOfUse'},"The <e1>distance</e1> between a door that opens onto a landing and the upper edge of the ramp or flight of stairs must be no less than <e2>400 millimetres</e2> on the side wall and no less than 1,500 millimetres on the end wall.",greater-equal,annotated
+7f3f59a4-fc7e-4b14-8074-384f6cacf548_9,,,"The <e1>total number</e1> of a barrier in a dwellings indoor areas may, however, be at least <e2>2.2 metres</e2> if the drop is less than three metres.",greater-equal,synthetic
+ec419055-6ed3-4dac-9879-748e2d365a26,"Internal building services: where services penetrate the air barrier, holes should be as small as possible and should be core drilled to limit damage.",{'ID': '180_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Internal building services: where <e1>services penetrate the air barrier</e1>, <e2>holes</e2> should be as small as possible and should be core drilled to limit damage.",part-of,annotated
+56b3f993-37b5-4cb1-9540-432972f8056e,"In a mechanical ventilation system, the air handling units and chambers shall be able to withstand the loads caused by fan pressure while the shutoff dampers are closed.",{'ID': '99_Finnish_Health-IndoorClimateAndVentilation'},"In a mechanical <e1>ventilation system</e1>, the air handling units and <e2>chambers</e2> shall be able to withstand the loads caused by fan pressure while the shutoff dampers are closed.",part-of,annotated
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_2,,,"In buildings more than 9 metres and at most 28 metres in height, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than <e1>twice the rise plus the going (2R G)</e1> in <e2>total flow rate</e2>, these must be accessible via the interior.",greater,synthetic
+a1f91cfd-21f8-49a4-8468-746f49f4848e,"For a building that contains more than one dwelling for example a block of flats or a terrace of houses an average target primary energy rate, target emission rate and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",{'ID': '50_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For a <e1>building</e1> that contains more than one <e2>dwelling</e2> for example a block of flats or a terrace of houses an average target primary energy rate, target emission rate and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",part-of,annotated
+c2e0629d-350b-45b8-9e9e-d58be1780f12_9,,,"If the <e1>Rigid ducts</e1> has no <e2>multipoint locking system</e2>, it should be treated as having one bedroom when calculating the ventilation required for the purposes of meeting the ventilation standards.",not-part-of,synthetic
+e505b13c-7b62-4857-aa2d-544dc986e9c0,"For dwellings, for external tapered steps and stairs that are part of the building the going of each step should be a minimum of 280mm.",{'ID': '18_UK_DocK_ProtectionFromFalling'},"For <e1>dwellings</e1>, for external tapered <e2>steps</e2> and stairs that are part of the building the going of each step should be a minimum of 280mm.",part-of,annotated
+2f815a08-db3c-48a6-b248-d69aeac870ee,"the vertical travel distance is: a. not more than 2m, where there is no liftway enclosure and no floor penetration; b. more than 2m, where there is a liftway enclosure.",{'ID': '173_UK_DocM_V2_AccessAndUseOfBuildings'},"the <e1>vertical</e1> <e2>travel distance</e2> is: a. not more than 2m, where there is no liftway enclosure and no floor penetration; b. more than 2m, where there is a liftway enclosure.",selection,annotated
+e32bbb47-c826-40c1-8ea4-8c32353d3fd2_11,,,There shall be <e1>three seconds</e1> of <e2>stack vent</e2> provided for people in the building.,equal,synthetic
+302c413e-fefd-47f1-914f-0dc787e4a761,"Where illuminance on surfaces is greater than 200 lux, a difference in light reflectance value should be a minimum of 20 points.",{'ID': '29_UK_DocM_V2_AccessAndUseOfBuildings'},"Where <e1>illuminance</e1> on surfaces is greater than <e2>200 lux</e2>, a difference in light reflectance value should be a minimum of 20 points.",greater,annotated
+9d522aad-d404-4a57-83f9-474c95932b9e,Handrails should be spaced away from the wall and rigidly supported in a way that avoids impeding finger grip.,{'ID': '57_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Handrails</e1> should be <e2>spaced away from the wall</e2> and rigidly supported in a way that avoids impeding finger grip.,necessity,annotated
+2f8d4247-e53b-49ae-bd26-c4f1765eaee8_4,,,"Extract air of <e1>total floor area</e1> <e2>0.9 metres</e2>, 3 and 4 shall not be used as recirculation air.",equal,synthetic
+c7035b48-7244-40a9-a70e-1d244caf72ac,"The same approved calculation tool must be used to calculate the target primary energy rate, target emission rate and target fabric energy efficiency rate and the dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate.",{'ID': '56_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The same approved calculation tool must be <e1>used to calculate</e1> the target primary energy rate, <e2>target emission rate</e2> and target fabric energy efficiency rate and the dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate.",selection,annotated
+8364a5f1-f80e-484c-9f38-bffc6f4c1876,"Where communal parking is provided to blocks of flats, at least one standard parking bay is provided close to the communal entrance of each core of the block (or to the lift core where the parking bay is internal).",{'ID': '44_UK_DocM_V1_AccessAndUseOfBuildings'},"Where <e1>communal</e1> parking is provided to <e2>blocks of flats</e2>, at least one standard parking bay is provided close to the communal entrance of each core of the block (or to the lift core where the parking bay is internal).",none,annotated
+339fc78c-a2f2-481c-a410-3aeb41e24b8a_11,,,Solid walls constructed of coursed brickwork or blockwork should be at least as <e1>locations</e1> as <e2>8 per cent (1:12.5)</e2> of the storey height.,greater-equal,synthetic
+10e66a84-25db-40a0-87d5-6297d0732fe4,The shutoff valves shall be located: 1) at each house; 2) at each apartment; 3) in vertical service pipes; 4) on both sides of devices installed in the service pipes; 5) before a device or fixture that is connected to the connector pipe;  6) on both sides of the water meters.,{'ID': '93_Finnish_Health-WaterAndSewerage'},The shutoff valves shall be located: 1) at each <e1>house</e1>; 2) at each apartment; 3) in vertical service pipes; 4) on both sides of devices installed in the service pipes; 5) before a device or fixture that is connected to the <e2>connector pipe</e2>; 6) on both sides of the water meters.,none,annotated
+457ecdc0-8247-4ad4-9beb-3b7a31cfa0fd,"All public areas, including lavatory accommodation, public telephones and external terraces should be accessible.",{'ID': '138_UK_DocM_V2_AccessAndUseOfBuildings'},"All public areas, including lavatory accommodation, public telephones and external <e1>terraces</e1> should be <e2>accessible</e2>.",none,annotated
+5925ca4d-801c-42e4-b581-a176dea2519f,"If thermal energy is supplied from a district heat network, a CO2 emission factor and primary energy factor for the heat delivered to the dwelling by the district heat network should be calculated.",{'ID': '76_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If thermal energy is supplied from a district heat network, a <e1>CO2 emission factor</e1> and primary energy factor for the heat delivered to the dwelling by the district heat network should be <e2>calculated</e2>.",necessity,annotated
+203faa23-7b71-47c9-a6e5-2333ac45389e_3,,,"The riser of the indoor steps of dwelling units and living quarters may be no more than 190 millimetres, and the <e1>ventilation rate</e1> must be no less than <e2>A</e2>.",greater-equal,synthetic
+517253f8-98b1-4821-8901-75124d3237db,"Consideration should be given to the provision of a second handrail on stairs in a wide range of building types, and particularly in schools, for use by children and people of short stature.",{'ID': '59_UK_DocM_V2_AccessAndUseOfBuildings'},"Consideration should be given to the provision of a second handrail on stairs in a <e1>wide range of building types</e1>, and particularly in schools, <e2>for use by children and people of short stature</e2>.",selection,annotated
+f06f7ec1-3b83-4e1a-a421-b09589f2374c,"Provision shall be made to prevent any door or gate: (a) which slides or opens upwards, from falling onto any person; and (b) which is powered, from trapping any person.",{'ID': '114_UK_DocK_ProtectionFromFalling'},"Provision shall be <e1>made to prevent</e1> any <e2>door or gate</e2>: (a) which slides or opens upwards, from falling onto any person; and (b) which is powered, from trapping any person.",necessity,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_1,,,"The free opening of the vertical hatch or window of an emergency exit must be at least <e1>25mm</e1> in <e2>load EER</e2> and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",greater-equal,synthetic
+716fa732-f3c7-43ad-a4e3-fff43a841018,The vehicle traffic area of a building and its courtyard must be safe and appropriate.,{'ID': '131_Finnish_SafetyOfUse'},The <e1>vehicle traffic area</e1> of a building and its courtyard must be <e2>safe</e2> and appropriate.,necessity,annotated
+783c19fa-0ef2-466f-b3e9-d4690e34ac5f,Where a system for onsite electricity generation is installed (a) reasonable provision must be made to ensure that (i) the system and its electrical output are appropriately sized for the site and available infrastructure; (ii) the system has effective controls; and (b) it must be commissioned by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.,{'ID': '214_UK_DocL_V1_ConsrvationOfFuelAndPower'},Where a system for onsite electricity generation is installed (a) reasonable provision must be made to ensure that (i) the system and its electrical output are appropriately sized for the site and available infrastructure; (ii) the system has <e1>effective</e1> controls; and (b) it must be commissioned by <e2>testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances</e2>.,none,annotated
+0da52584-1b37-48b5-840f-3795ae695275_8,,,the minimum clear dimensions of the platform are: 1100mm wide and <e1>0.7</e1> <e2>exceptional circumstances</e2> where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+1913381b-a2cc-496e-9168-82ccf2a01d50_0,,,"In connection with repair and alteration work, the heat emitters connected to the domestic hot water ring duct may be replaced so that the <e1>vicinity</e1> of the heat emitters to be installed does not exceed <e2>850 millimetres</e2>.",less-equal,synthetic
+3c0a8ccb-d813-40fb-b69b-88250d3bc4ec_9,,,These fittings should not exceed a <e1>distance</e1> of <e2>8 per cent (1:12.5)</e2>.,less-equal,synthetic
+73a6e4e0-c157-4cae-bc28-c0788f6a1e53,"Activation (e.g. motion sensors and push buttons), safety features and the time-lapse allowed for entry and exit through powered door systems should be carefully considered to suit the needs of people who cannot react quickly.",{'ID': '73_UK_DocM_V2_AccessAndUseOfBuildings'},"Activation (e.g. motion sensors and push buttons), safety features and the time-lapse allowed for entry and exit through <e1>powered</e1> <e2>door systems</e2> should be carefully considered to suit the needs of people who cannot react quickly.",selection,annotated
+d12808b8-b64d-4742-8026-ba93fe86246d,The pumping station shall be located in a place where it can be easily inspected and serviced.,{'ID': '132_Finnish_Health-WaterAndSewerage'},The <e1>pumping station</e1> shall be <e2>located in a place where it can be easily inspected and serviced</e2>.,necessity,annotated
+24729e93-fd1e-4e91-bbd6-ef8e73c582fb,"A unit that contains both living accommodation and space for commercial purposes (e.g. as aworkshop or office) should be treated as a residential building, as long as the commercial part canrevert to residential use.",{'ID': '3_UK_DocO_Overheating'},"A <e1>unit</e1> that contains both living accommodation and space for commercial purposes (e.g. as aworkshop or office) should be <e2>treated as a residential building, as long as the commercial part canrevert to residential use</e2>.",necessity,annotated
+922bf8df-3a70-4f45-8c04-200b638d3b3c_2,,,The cold water pipe shall be designed and installed so that the <e1>thermal integrity</e1> in the cold water system may not exceed <e2>one metre</e2>.,less-equal,synthetic
+dd056285-1aa4-4c6d-94ac-b911458cb7ea,"Where any of the parking spaces for new buildings other than residential or mixed-use buildings are in a covered car park, the requirement to install an electric vehicle charge point should be met by installing a charge point in a parking space that is not within a covered car park.",{'ID': '70_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where any of the parking spaces for new <e1>buildings</e1> <e2>other than residential or mixed-use buildings</e2> are in a covered car park, the requirement to install an electric vehicle charge point should be met by installing a charge point in a parking space that is not within a covered car park.",selection,annotated
+9f8c2fbb-a04e-42f9-8fa0-b7a905dbafa0,"The ventilation openings or slots leading to the ventilation space or gap of a structure equipped with a ventilation space or gap must be positioned so that the ventilation space or gap is fully usable as a ventilation air flow path and that the ventilation space or gap is free of enclosed, non-ventilated areas.",{'ID': '40_Finnish_Health-Humidity'},"The ventilation <e1>openings</e1> or slots leading to the ventilation space or gap of a structure equipped with a ventilation space or gap must be positioned so that the ventilation space or gap is <e2>fully usable as a ventilation air flow path</e2> and that the ventilation space or gap is free of enclosed, non-ventilated areas.",none,annotated
+302c413e-fefd-47f1-914f-0dc787e4a761_0,,,"Where <e1>fire compartmenting requirement</e1> on surfaces is greater than <e2>300 litres</e2>, a difference in light reflectance value should be a minimum of 20 points.",greater,synthetic
+2c8d2bc3-cf23-48f8-b9c0-b90f150f9f93,"Any walls, doors and windows should be insulated and draught-proofed to at least the same extent as in the existing building.",{'ID': '426_UK_DocM_V2_AccessAndUseOfBuildings'},"Any walls, doors and windows should be <e1>insulated</e1> and draught-proofed to <e2>at least the same extent as in the existing building</e2>.",selection,annotated
+38cd3221-7fc9-4462-be20-78b16a4309d3,The area of openings in the newly created dwelling should not be more than 25 of the total floor area.,{'ID': '490_UK_DocL_V1_ConsrvationOfFuelAndPower'},The area of <e1>openings</e1> in the <e2>newly created</e2> dwelling should not be more than 25 of the total floor area.,none,annotated
+d3e7a947-536e-4a49-9823-e27fc0f68b27_0,,,<e1>heat</e1> of landings to be at least equal to the <e2>product certificate</e2> of the ramp.,greater-equal,synthetic
+fc8ee55c-408d-48a9-ae4c-a6961b5745ce,Biomass heating supplemented by an alternative appliance (e.g. gas) - the CO2 emission factor and primary energy factor should be based on a weighted average for the two fuels.,{'ID': '59_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Biomass heating</e1> supplemented by an alternative appliance (e.g. gas) - the <e2>CO2 emission factor</e2> and primary energy factor should be based on a weighted average for the two fuels.,part-of,annotated
+7577d9f7-9f3c-4d3b-b8d9-da31d3e1b201,"For example, glare and reflections from shiny surfaces, and large repeating patterns, should be avoided in spaces where visual acuity is critical as they will hamper communication for people with impaired vision, and those who lip read or use sign language.",{'ID': '150_UK_DocM_V2_AccessAndUseOfBuildings'},"For example, glare and reflections from <e1>shiny</e1> <e2>surfaces</e2>, and large repeating patterns, should be avoided in spaces where visual acuity is critical as they will hamper communication for people with impaired vision, and those who lip read or use sign language.",selection,annotated
+569c7958-b7d6-4b9c-9dd9-13307e95e59b_9,,,"For ducted systems that are served by fans with a <e1>annual percentage of heat</e1> greater than <e2>0.136kgCO2/kWh</e2>, ductwork leakage tests should be carried out.",greater,synthetic
+a1f91cfd-21f8-49a4-8468-746f49f4848e_0,,,"For a building that contains more than <e1>24 metres</e1> <e2>exterior wall</e2> for example a block of flats or a terrace of houses an average target primary energy rate, target emission rate and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",greater,synthetic
+a2f3a871-91d5-4777-95c9-4744792b3a69,"in an existing building, for the principal or main staff entrance or entrances to be accessible, an alternative accessible entrance should be provided.",{'ID': '61_UK_DocM_V2_AccessAndUseOfBuildings'},"in an <e1>existing</e1> building, for the principal or <e2>main staff</e2> entrance or entrances to be accessible, an alternative accessible entrance should be provided.",none,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",{'ID': '84_Finnish_Health-IndoorClimateAndVentilation'},"If the air flows of extract air categories 1 and 2 are combined into the same duct and <e1>category</e1> <e2>2</e2> air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,annotated
+20518e80-6f7e-457f-8c5a-59fa4c0eb324_1,,,"When calculating the heat loss for a buildings design solution, the <e1>either side</e1> shall be used as the value of the <e2>cross-sectional area</e2> for the building envelope.",equal,synthetic
+0262f6e5-21bc-4312-9388-8ac93b79416d_4,,,The minimum full <e1>sunken area</e1> of the absorption chillers should be no worse than <e2>0.35W/(m2K)</e2>.,greater-equal,synthetic
+e32bbb47-c826-40c1-8ea4-8c32353d3fd2_9,,,There shall be <e1>1m2</e1> of <e2>structure</e2> provided for people in the building.,equal,synthetic
+7e34700e-92de-4b00-a820-f4085a2e186c_11,,,"If the free gap between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than 2 metres, the wall in question must be <e1>going</e1> <e2>0.3</e2>.",equal,synthetic
+45adb0b6-63ee-4f42-b6a3-8fc396221c67,The depth of the insulation plus any required air gap should be at least to the depth of the rafters.,{'ID': '128_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>depth</e1> of the insulation plus any <e2>required</e2> air gap should be at least to the depth of the rafters.,selection,annotated
+73b4b305-8971-489a-a290-f996e1f63e19,"The clear width of the door and opening leading to room spaces of a non-residential building as well as to residential rooms of a residential building, necessary spaces serving residence and spaces serving the use of the building shall be at least 800 millimetres.",{'ID': '19_Finnish_Accessibility'},"The clear width of the <e1>door</e1> and opening <e2>leading to room spaces of a non-residential building as well as to residential rooms of a residential building, necessary spaces serving residence and spaces serving the use of the building</e2> shall be at least 800 millimetres.",selection,annotated
+13a437c0-918c-47f2-85bd-b80dd69eb027,"There are no limits on the design of display windows and similar glazing, but for new buildings their impact must be taken into account in the calculation of primary energy and CO2 emissions.",{'ID': '138_UK_DocM_V2_AccessAndUseOfBuildings'},"There are no limits on the design of <e1>display windows</e1> and similar glazing, but for new buildings <e2>their</e2> impact must be taken into account in the calculation of primary energy and CO2 emissions.",none,annotated
+87c9cfa3-8093-497d-be10-dc054abe7062,"For common leaf lintels, the base plate should not be continuous and the lintel core should be insulated.",{'ID': '164_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For common <e1>leaf lintels</e1>, the base plate should not be continuous and the <e2>lintel core</e2> should be insulated.",part-of,annotated
+4fc3b5b1-a838-4429-b385-d8e80e6633eb_7,,,"In the absence of relevant harmonised European Standards, products with a <e1>structure</e1> exceeding <e2>190  millimetres</e2> must have a product certificate issued by a Notified Body.",greater,synthetic
+bfdf95da-d422-47cd-83d7-a30a4969f2e6,"If the internal ties must be centred on the supporting line, the minimum value of the tie force, 10 kN, will also be applied to internal ties.",{'ID': '180_Finnish_StabilityOfStructures'},"If the internal ties must be centred on the supporting line, the minimum value of the <e1>tie force</e1>, <e2>10 kN</e2>, will also be applied to internal ties.",greater-equal,annotated
+86350df0-a40e-412b-a301-004524d56736_8,,,"For wet heating systems in new dwellings with a <e1>water vapour resistance</e1> of <e2>450mm</e2> or greater, a minimum of two independently controlled heating circuits should be provided.",greater-equal,synthetic
+b63dcef6-1840-4e9e-ad51-f8fc481fe856,"The wall ties should have a horizontal spacing of 900mm and a vertical spacing of 450mm, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",{'ID': '36_UK_DocA_Structure'},"The <e1>wall ties</e1> should have a <e2>horizontal spacing</e2> of 900mm and a vertical spacing of 450mm, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",necessity,annotated
+72e7ed0c-9e73-46b2-a919-20f3fea337fd_8,,,"An <e1>Roofs</e1> with a potentially flammable or explosive atmosphere must not be located in a <e2>water meter</e2> where there are dwellings, accommodation premises, institutions or assembly and business premises.",not-part-of,synthetic
+825053cb-af5d-43a9-b59b-e2a5ae78ea73_8,,,The <e1>energy performance</e1> of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the <e2>effective rated output</e2> of dwellings in the residential building; b. the number of associated parking spaces.,greater,synthetic
+f0c72b35-5a0a-4554-8713-96f6f73a67f1_2,,,A cube with <e1>widened</e1> of no more than <e2>three</e2> may pass between the lower edge of a barriers protective part and the landing or the upper surface or edge of a step.,less-equal,synthetic
+f6a682fb-f427-41d0-9219-3a45d2134be6,"To correctly assess whether an element meets the limiting U-value, the U-value must be calculated for the element in the appropriate plane - either horizontal or vertical.",{'ID': '109_UK_DocL_V1_ConsrvationOfFuelAndPower'},"To correctly assess whether an element meets the limiting U-value, the <e1>U-value</e1> must be <e2>calculated for the element in the appropriate plane - either horizontal or vertical</e2>.",necessity,annotated
+16f6f10e-f32f-48b2-85f9-123cdb5448ee,Any unavoidable gaps between boards should be infilled using compressible tape (e.g. for boards within roof rafters) or low expansion foam (e.g. for boards within wall cavities).,{'ID': '147_UK_DocL_V1_ConsrvationOfFuelAndPower'},Any unavoidable <e1>gaps</e1> <e2>between boards</e2> should be infilled using compressible tape (e.g. for boards within roof rafters) or low expansion foam (e.g. for boards within wall cavities).,selection,annotated
+ddc0bba6-2df8-43e1-9398-37514366fb06,"For fixed terminals with automatic flow adjustment at the fan unit, the fan speed should be set to achieve the desired continuous flow rate.",{'ID': '208_UK_DocF_V1_Ventilation'},"For fixed terminals with <e1>automatic flow adjustment</e1> at the <e2>fan unit</e2>, the fan speed should be set to achieve the desired continuous flow rate.",part-of,annotated
+8c4a09c5-1eb2-4a41-86d9-b69c031b4592,Ground arrays including header pipes and manifolds should be flushed as one system to remove all debris and purged to remove all air.,{'ID': '384_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Ground arrays</e1> including <e2>header pipes</e2> and manifolds should be flushed as one system to remove all debris and purged to remove all air.,part-of,annotated
+2fad9e0f-fa0d-4a6b-9c63-152ef8828c4d_11,,,"An upstand built on site should not exceed a <e1>instantaneous carbon monoxide concentration</e1> of <e2>1,200 MJ/m2</e2>.",less-equal,synthetic
+c8a048c6-8e7e-4b5a-ada5-02990b983401,"A natural ventilation system, a mechanical extract ventilation system or a mechanical supply and extract ventilation system shall not be designed to be combined in such a way that the directions of air flow between the rooms and in the ductworks may change when the air flows are being controlled.",{'ID': '91_Finnish_Health-IndoorClimateAndVentilation'},"A natural ventilation system, a mechanical extract ventilation system or a <e1>mechanical</e1> <e2>supply and extract ventilation system</e2> shall not be designed to be combined in such a way that the directions of air flow between the rooms and in the ductworks may change when the air flows are being controlled.",selection,annotated
+aef92227-4c01-4c59-b96d-ce414540606b,"Appliances capable of burning both biomass fuel and fossil fuel the CO2 emission factor and primary energy factor for dua-lfuel appliances should be used, except where the building is in a smoke control area, when the anthracite figure should be used.",{'ID': '63_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Appliances</e1> capable of burning both biomass fuel and fossil fuel the <e2>CO2 emission factor</e2> and primary energy factor for dua-lfuel appliances should be used, except where the building is in a smoke control area, when the anthracite figure should be used.",necessity,annotated
+86a39a0b-093f-4920-9879-fe7b3ae6675a,"In principle, suitable sanitary accommodation should be available to everybody, including sanitary accommodation designed for wheelchair users, ambulant disabled people, people of either sex with babies and small children or people encumbered by luggage.",{'ID': '155_UK_DocM_V2_AccessAndUseOfBuildings'},"In principle, suitable <e1>sanitary accommodation</e1> should be available to everybody, including sanitary accommodation <e2>designed for wheelchair users, ambulant disabled people, people of either sex with babies and small children or people encumbered by luggage</e2>.",necessity,annotated
+e3b85ad6-6132-40d7-86f8-3cc5d44eb12c_9,,,<e1>2m</e1> <e2>Double doors</e2> should be close to an accessible bathroom suitable for a wheelchair user.,equal,synthetic
+fb5d3054-4911-4049-ba09-1c3e80f9c07c,"The tread of steps in uncovered or unheated outdoor staircases must be no less than 390 millimetres, and the riser may be no more than 130 millimetres.",{'ID': '29_Finnish_SafetyOfUse'},"The tread of steps in <e1>uncovered</e1> or unheated <e2>outdoor</e2> staircases must be no less than 390 millimetres, and the riser may be no more than 130 millimetres.",none,annotated
+a2f3a871-91d5-4777-95c9-4744792b3a69,"in an existing building, for the principal or main staff entrance or entrances to be accessible, an alternative accessible entrance should be provided.",{'ID': '61_UK_DocM_V2_AccessAndUseOfBuildings'},"in an existing <e1>building</e1>, for the principal or main staff entrance or <e2>entrances</e2> to be accessible, an alternative accessible entrance should be provided.",part-of,annotated
+113b8bf8-1856-45f5-a54b-d65ef100b437_6,,,"If a gas-fired combination boiler is installed in an existing dwelling, at least <e1>1,500  millimetres</e1> of the following <e2>both sides</e2>, appropriate to the system, should be installed.",greater-equal,synthetic
+20216261-f56d-4f79-8a46-c781abe19f04,"For new and existing buildings other than dwellings, information should be provided in a new or existing building log book.",{'ID': '98_UK_DocF_V2_Ventilation'},"For new and <e1>existing</e1> buildings other than dwellings, information should be <e2>provided in a new or existing building log book</e2>.",none,annotated
+596cc55c-f50f-4155-962f-832b87226a8e,"For mechanical ventilation systems, fan units should be appropriately sized so that fans operating in normal background ventilation mode are not overly noisy.",{'ID': '23_UK_DocF_V1_Ventilation'},"For <e1>mechanical</e1> <e2>ventilation systems</e2>, fan units should be appropriately sized so that fans operating in normal background ventilation mode are not overly noisy.",selection,annotated
+cc72106e-9e7f-47cf-8a95-0173a8305dad_5,,,"In a new building, the crawl space <e1>indoor units</e1> must be <e2>10m</e2> on average at the minimum.",greater-equal,synthetic
+76bf63bd-30f4-440d-81a0-61ca16170f70,Control should be maximised and heat gain to uninsulated pipes should only be permitted where the proportion of the cooling load relating to distribution pipework is less than 1 of the total load.,{'ID': '177_UK_DocM_V2_AccessAndUseOfBuildings'},Control should be maximised and <e1>heat gain</e1> to uninsulated pipes should only be <e2>permitted</e2> where the proportion of the cooling load relating to distribution pipework is less than 1 of the total load.,necessity,annotated
+eccd4f77-ef4a-41fd-a22a-620c84fdddd4_7,,,There is a minimum of <e1>100 millimetres</e1> of worktop to at least <e2>value</e2> of the oven and fridge or fridge freezer where this is taller than the worktop height (or to one side of a pair of tall appliances where they are located together at the end of a run).,greater-equal,synthetic
+01008f69-874b-443e-bcb2-2f5630280049_3,,,"If stairs are used only as an emergency exit and if they lead to spaces in a dwelling or accommodation facility other than those that are necessary for living, the <e1>indoor and outdoor conditions</e1> may be no more than <e2>35 mg/m3 (30 ppm)</e2> and the tread must be no less than 220 millimetres.",less-equal,synthetic
+e874f337-2067-4e77-ad32-c3b857f40e7a,"If the number of occupants exceeds 120, the total minimum width of the exits shall be calculated by increasing the original 1,200 millimetres by 400 millimetres for each additional group of 60 people.",{'ID': '219_Finnish_FireSafety'},"If the <e1>number of occupants</e1> exceeds <e2>120</e2>, the total minimum width of the exits shall be calculated by increasing the original 1,200 millimetres by 400 millimetres for each additional group of 60 people.",greater,annotated
+4c83069b-8c22-43ad-92a0-354ecd0e40a1,"Sufficient information should be provided to ensure that people can operate, maintain or alter an electrical installation with reasonable safety.",{'ID': '7_UK_DocP_ElectricalSafety'},"Sufficient <e1>information</e1> should be <e2>provided to ensure that people can operate, maintain or alter an electrical installation with reasonable safety</e2>.",necessity,annotated
+302c413e-fefd-47f1-914f-0dc787e4a761_6,,,"Where <e1>wide</e1> on surfaces is greater than <e2>0.055555556</e2>, a difference in light reflectance value should be a minimum of 20 points.",greater,synthetic
+50e89a86-e2be-439d-b230-79274cd7199b_3,,,Modular and portable buildings with a planned <e1>standard thickness</e1> of more than <e2>E 15</e2> at a single location should be shown to comply with the energy efficiency requirements.,greater,synthetic
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_10,,,"The wall ties should have a horizontal spacing of 900mm and a vertical spacing of 450mm, or alternatively should be spaced such that the <e1>visual contrast</e1> is not less than <e2>500kW</e2>.",greater-equal,synthetic
+99a53f17-48cb-4012-a47b-700761e0983b,Where a new building which is not a residential building or a mixed-use building has more than 10 parking spaces (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,{'ID': '61_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},Where a new building which is not a residential building or a mixed-use building has more than 10 parking spaces (a) <e1>one</e1> of those <e2>parking spaces</e2> must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,equal,annotated
+eefe1191-2903-4fb8-9138-6471e09fb67d_7,,,The <e1>design value</e1> exceeds <e2>2m</e2> at 11pm.,greater,synthetic
+c0a6d35c-cc20-428b-941d-c3e3e6365c74,"In a tier that is uninterrupted by cross-gangways, and where the pitch exceeds 25, use a maximum number of steps of 40.",{'ID': '25_UK_DocK_ProtectionFromFalling'},"In a tier that is uninterrupted by cross-gangways, and where the pitch exceeds 25, use a <e1>maximum</e1> number of steps of <e2>40</e2>.",equal,annotated
+f3bd99b4-7ea5-4968-af10-3c133c0b5aa0_7,,,No individual flight has a <e1>either side</e1> of more than <e2>2</e2>.,less-equal,synthetic
+3ca5cb38-b90b-4449-ba14-4268866df8e1_0,,,The water heater is close to the draw-off points and has a <e1>integrity</e1> no greater than <e2>3.3m</e2>.,less-equal,synthetic
+8cef7dc5-2d76-4dd8-80c5-6861b11a8f6f,"Where the work concerns a building containing more than one dwelling, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",{'ID': '3_UK_DocR_V1_InfrastructureForElectircalCommunications'},"Where the work concerns a building containing more than <e1>one</e1> <e2>dwelling</e2>, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",greater-equal,annotated
+45adb0b6-63ee-4f42-b6a3-8fc396221c67,The depth of the insulation plus any required air gap should be at least to the depth of the rafters.,{'ID': '128_UK_DocL_V1_ConsrvationOfFuelAndPower'},The depth of the <e1>insulation</e1> plus any required <e2>air gap</e2> should be at least to the depth of the rafters.,none,annotated
+99a53f17-48cb-4012-a47b-700761e0983b,Where a new building which is not a residential building or a mixed-use building has more than 10 parking spaces (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,{'ID': '61_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},Where a <e1>new</e1> building which is not a residential building or a mixed-use building has more than 10 parking spaces (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for <e2>electric vehicle charge points</e2> must be installed in a minimum of one fifth of the total number of remaining parking spaces.,none,annotated
+fb5d3054-4911-4049-ba09-1c3e80f9c07c_3,,,"The tread of steps in uncovered or unheated outdoor staircases must be no less than 390 millimetres, and the <e1>energy efficiency</e1> may be no more than <e2>two years</e2>.",less-equal,synthetic
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3_5,,,"Where the <e1>energy efficiency measures</e1> of installing only cable routes is more than <e2>five</e2> of the total cost of the major renovation, there is no requirement to install either electric vehicle charge points or cable routes.",greater,synthetic
+82aa0792-8ea3-414a-9952-933b4959b782,"NOTE: All boilers should be used in the calculation, including any that are identical.",{'ID': '249_UK_DocM_V2_AccessAndUseOfBuildings'},"NOTE: All <e1>boilers</e1> should be <e2>used in the calculation, including any that are identical</e2>.",none,annotated
+f5a71c7b-e852-40f2-8f88-91cda7902a7e,"If a new building has a space heating or airconditioning system with an effective rated output greater than 180kW, a building automation and control system should be installed.",{'ID': '319_UK_DocM_V2_AccessAndUseOfBuildings'},"If a new <e1>building</e1> has a space heating or airconditioning system with an effective rated output greater than 180kW, a <e2>building automation and control system</e2> should be installed.",necessity,annotated
+3e9fc57e-bc69-4f17-a056-dd7767afa9bb,"If the height of the building does not exceed 28 metres, access to the attic fire compartments from the outside shall be required.",{'ID': '241_Finnish_FireSafety'},"If the height of the building does not exceed 28 metres, access to the <e1>attic</e1> fire compartments <e2>from the outside</e2> shall be required.",none,annotated
+bf798097-bb99-42d0-a73f-8cebab8fbeb8,"In the entrance halls and other indoor areas of administrative, service and business premises and in assembly areas, the riser of the steps must be no more than 160 millimetres and the tread must be no less than 300 millimetres.",{'ID': '21_Finnish_SafetyOfUse'},"In the entrance halls and other <e1>indoor areas</e1> of <e2>administrative, service and business premises</e2> and in assembly areas, the riser of the steps must be no more than 160 millimetres and the tread must be no less than 300 millimetres.",part-of,annotated
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab_2,,,"If the <e1>configuration</e1> of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds <e2>0.2</e2> of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",greater,synthetic
+5f675f4f-74de-4d0f-ae92-c3500d2d952e,The actual equivalent area and location of installed background ventilators should be recorded.,{'ID': '189_UK_DocF_V1_Ventilation'},The actual <e1>equivalent area</e1> and location of installed <e2>background ventilators</e2> should be recorded.,part-of,annotated
+1e0aa8d6-4291-4a33-883c-b88453c83287,"To correctly assess whether an element meets the limiting U-value, the U-value must be calculated for the element in the appropriate plane either horizontal or vertical.",{'ID': '128_UK_DocM_V2_AccessAndUseOfBuildings'},"To correctly assess whether an element meets the limiting U-value, the <e1>U-value</e1> must be <e2>calculated for the element in the appropriate plane either horizontal or vertical</e2>.",necessity,annotated
+aa921550-3c5f-470b-b578-1788f83b49a7,Uplighters mounted at low or floor level can disorientate some visually impaired people and should be avoided.,{'ID': '153_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Uplighters</e1> <e2>mounted at low or floor level</e2> can disorientate some visually impaired people and should be avoided.,selection,annotated
+ebc429f0-cb90-41ab-9a11-401a2ddc7bad,"For continuous mechanical ventilation systems, such as continuous mechanical extract ventilation or mechanical ventilation with heat recovery, the system should be balanced to achieve design air flow rates at each room terminal.",{'ID': '268_UK_DocF_V1_Ventilation'},"For <e1>continuous</e1> mechanical <e2>ventilation systems</e2>, such as continuous mechanical extract ventilation or mechanical ventilation with heat recovery, the system should be balanced to achieve design air flow rates at each room terminal.",selection,annotated
+6ec243f2-9294-4b7c-89a4-1c46e4a69cc9_11,,,"If site constraints necessitate an <e1>their</e1> of <e2>0.3</e2> or steeper, an approach incorporating ramped access should be provided.",greater-equal,synthetic
+e8340500-38b6-461b-b00d-d3aa44ac1f0b_1,,,The <e1>maximum number of occupants</e1> of the water available from the hot water system may not exceed <e2>6mm</e2>.,less-equal,synthetic
+511c1a7f-08b9-48ec-aea6-9b749fdf31a1,"A non-residential building shall, considering the intended use and functional units of the building and distances in the building, have an adequate number of appropriately located toilet facilities which are suitable for users of wheelchairs and walking frames with wheels.",{'ID': '51_Finnish_Accessibility'},"A <e1>non-residential building</e1> shall, considering the intended use and functional units of the building and distances in the building, have an adequate number of appropriately located toilet facilities which are <e2>suitable for users of wheelchairs and walking frames with wheels</e2>.",none,annotated
+10e66a84-25db-40a0-87d5-6297d0732fe4,The shutoff valves shall be located: 1) at each house; 2) at each apartment; 3) in vertical service pipes; 4) on both sides of devices installed in the service pipes; 5) before a device or fixture that is connected to the connector pipe;  6) on both sides of the water meters.,{'ID': '93_Finnish_Health-WaterAndSewerage'},The shutoff valves shall be located: 1) at each house; 2) at each apartment; 3) in vertical service pipes; 4) on <e1>both sides</e1> of <e2>devices</e2> installed in the service pipes; 5) before a device or fixture that is connected to the connector pipe; 6) on both sides of the water meters.,part-of,annotated
+5fe7997a-7e99-485c-89b3-7912d7c8d44d,"If the total flow rate cannot be achieved through all the terminals, then the fan speed should be increased.",{'ID': '199_UK_DocF_V1_Ventilation'},"If the total flow rate cannot be achieved through all the terminals, then the <e1>fan</e1> <e2>speed</e2> should be increased.",part-of,annotated
+079db365-cfed-474e-9329-25349ac0db4a,"In connection with the door of an outside space of an individual dwelling the level difference outside the door may be more than 20 millimetres if the level difference can, with reasonable effort, be eliminated with equipment in the outdoor space.",{'ID': '21_Finnish_Accessibility'},"In connection with the door of an outside space of an individual dwelling the <e1>level difference</e1> outside the door may be more than <e2>20 millimetres</e2> if the level difference can, with reasonable effort, be eliminated with equipment in the outdoor space.",greater,annotated
+78d904cd-b605-43a6-b3a4-34c22f557123,"Instead, the dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate should be calculated as if the area covered by the pool were replaced with the equivalent area of floor with the same U-value as the pool surround.",{'ID': '84_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Instead, the dwelling primary energy rate, <e1>dwelling emission rate</e1> and <e2>dwelling fabric energy efficiency rate</e2> should be calculated as if the area covered by the pool were replaced with the equivalent area of floor with the same U-value as the pool surround.",none,annotated
+aaca648c-5f60-4300-a30f-887da252ebd0,The use of visually and acoustically reflective wall surfaces should be minimised within the lifting platform to prevent discomfort for people with visual and hearing impairment.,{'ID': '116_UK_DocM_V2_AccessAndUseOfBuildings'},The <e1>use</e1> of visually and acoustically reflective wall surfaces should be <e2>minimised within the lifting platform to prevent discomfort for people with visual and hearing impairment</e2>.,necessity,annotated
+dcc583b1-8c4c-42cf-a1ed-e8907de56254_1,,,"The rise of the indoor steps of other spaces intended for everyday use may be no more than 180 millimetres, and the <e1>surfaces</e1> must be no less than <e2>25W/m2</e2>.",greater-equal,synthetic
+993e54cc-49c3-43cb-995e-1a951c93c775_11,,,"When a warning sign is not posted, the areas shall be designed to an axle load Qk and also to an <e1>exposure coefficient</e1> equal to <e2>adequate means</e2>.",equal,synthetic
+164122ed-c7ac-4cf8-8a54-3d56c144f78d,"In general, the findings indicate that there should be at least the same number of WCs (for women) as urinals (for men) and for some building types, e.g. large retail buildings, at least twice as many.",{'ID': '172_UK_DocM_V2_AccessAndUseOfBuildings'},"In general, the findings indicate that there should be at least the same number of WCs (for women) as <e1>urinals (for men)</e1> and for <e2>some</e2> building types, e.g. large retail buildings, at least twice as many.",none,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_7,,,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the <e1>operation</e1> of these must be at least <e2>90mm</e2>.",greater-equal,synthetic
+76bf63bd-30f4-440d-81a0-61ca16170f70,Control should be maximised and heat gain to uninsulated pipes should only be permitted where the proportion of the cooling load relating to distribution pipework is less than 1 of the total load.,{'ID': '177_UK_DocM_V2_AccessAndUseOfBuildings'},Control should be maximised and heat gain to uninsulated pipes should only be permitted where the proportion of the cooling load relating to distribution pipework is less than <e1>1</e1> of the <e2>total load</e2>.,part-of,annotated
+c952db0f-b605-4335-8d56-97fc339ad5ba_8,,,All <e1>0.07</e1> <e2>requirement</e2> of the installation and commissioning checklist should be completed.,equal,synthetic
+a8b3e54e-902c-4502-99a2-8c41d46f1416_4,,,"If there are more than <e1>1.2W/(m2K)</e1> <e2>facade</e2> in a space, they must be linked to one another in at least four groups, unless the chairs are placed around tables.",greater,synthetic
+a8b3e54e-902c-4502-99a2-8c41d46f1416_0,,,"If there are more than <e1>four</e1> <e2>structures</e2> in a space, they must be linked to one another in at least four groups, unless the chairs are placed around tables.",greater,synthetic
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_6,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for <e1>performance standards</e1> 1 and <e2>E 15</e2> if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",equal,synthetic
+2f89cb06-3ee9-49b5-ac36-46f31ae3928f,Hot water pipework should be insulated in all areas inside and outside the building unless it can be demonstrated that the heat is always useful.,{'ID': '170_UK_DocM_V2_AccessAndUseOfBuildings'},Hot water pipework should be insulated in all areas inside and outside the building unless it can be demonstrated that the <e1>heat</e1> is <e2>always useful</e2>.,selection,annotated
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be class E 15.",{'ID': '134_Finnish_FireSafety'},"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding <e1>two</e1> storeys is EI 30; however, minor sealing parts and penetrations may be <e2>class</e2> E 15.",none,annotated
+bb9ec292-062b-43c3-8590-856dd5f6b890_1,,,"The <e1>categories</e1> and building emission rate calculated using the measured air permeability must not be higher than the <e2>category</e2> and target emission rate, respectively.",less-equal,synthetic
+259c1614-77ef-4ae4-a401-83caa603e374,"The main doors for entering a dwelling (usually the front doorset) should be fitted with a multipoint locking system that meets the requirements of: PAS 3621 (key locking on both sides), or PAS 8621 (non-key locking on the internal face), or PAS 10621 (non-key locking on the internal face, but with an external locking override facility).",{'ID': '35_UK_DocQ_Security_Dwellings'},"The main doors for entering a dwelling (usually the front doorset) should be fitted with a <e1>multipoint locking system</e1> that meets the requirements of: PAS 3621 (key locking on both sides), or PAS 8621 (non-key locking on the internal face), or <e2>PAS 10621 (non-key locking on the internal face, but with an external locking override facility)</e2>.",selection,annotated
+aa41a5d4-c0b1-4da7-84a0-5c2e2738654f,The total number of ventilators installed in the dwellings habitable rooms and kitchens should be at least the following: Five ventilators if the dwelling has more than one bedroom.,{'ID': '89_UK_DocF_V1_Ventilation'},The total number of ventilators installed in the dwellings habitable rooms and kitchens should be at least the following: Five ventilators if the <e1>dwelling</e1> has more than one <e2>bedroom</e2>.,part-of,annotated
+b850a570-c0bd-4cf0-8b46-338ff5d8aa78,NOTE: A system for purge ventilation should be provided in each habitable room to demonstrate compliance with Part F of the Building Regulations.,{'ID': '67_UK_DocO_Overheating'},NOTE: A <e1>system for purge ventilation</e1> should be provided in each habitable room to <e2>demonstrate compliance with Part F of the Building Regulations</e2>.,selection,annotated
+bde1697a-20c9-4f15-a63c-5be323a058c1_8,,,Any connection of <e1>900-1000mm</e1> or more <e2>heating systems</e2> to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,greater-equal,synthetic
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_4,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the <e1>Ventilation</e1> from these spaces does not exceed <e2>0.07</e2> of the total air flow in the vertical duct.",less-equal,synthetic
+2c12675d-93c9-496a-acf9-b30465dae93d,Any flexible ducts should be installed so that the full internal diameter is maintained and flow resistance is minimised.,{'ID': '113_UK_DocF_V1_Ventilation'},Any flexible ducts should be <e1>installed</e1> so that the full internal diameter is maintained and <e2>flow resistance is minimised</e2>.,selection,annotated
+1ebce0c9-705c-47ee-8429-e83cfbed72db,"All walls, ducts and boxings to every WC/cloakroom, bath and shower room are strong enough to support grab rails, seats and other adaptations that could impose a load of 1.5kN/m2.",{'ID': '103_UK_DocM_V1_AccessAndUseOfBuildings'},"All walls, ducts and <e1>boxings</e1> to every <e2>WC/cloakroom</e2>, bath and shower room are strong enough to support grab rails, seats and other adaptations that could impose a load of 1.5kN/m2.",part-of,annotated
+cc72106e-9e7f-47cf-8a95-0173a8305dad,"In a new building, the crawl space height must be 0.8 metres on average at the minimum.",{'ID': '83_Finnish_Health-Humidity'},"In a new building, the crawl space <e1>height</e1> must be <e2>0.8 metres</e2> on average at the minimum.",greater-equal,annotated
+a235c68f-ae44-4770-b005-4e9d7b659eb7_0,,,All cavity walls should have leaves at least 90mm thick and cavities at least <e1>100 litres</e1> <e2>number of appliances</e2>.,greater-equal,synthetic
+56517433-cf40-4b88-a9d4-18e61e0e9993_2,,,"In addition, on both sides of the toilet seat there shall be a <e1>load-bearing element</e1> of at least <e2>One</e2>.",greater-equal,synthetic
+76bf63bd-30f4-440d-81a0-61ca16170f70,Control should be maximised and heat gain to uninsulated pipes should only be permitted where the proportion of the cooling load relating to distribution pipework is less than 1 of the total load.,{'ID': '177_UK_DocM_V2_AccessAndUseOfBuildings'},Control should be <e1>maximised</e1> and heat gain to uninsulated pipes should only be permitted where the proportion of the cooling load relating to distribution pipework is less than <e2>1</e2> of the total load.,none,annotated
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3_11,,,"Where the cost of installing only cable routes is more than 7% of the total cost of the major <e1>extension</e1>, there is no <e2>load-bearing element</e2> to install either electric vehicle charge points or cable routes.",not-part-of,synthetic
+9415ae4b-7a74-4c70-a245-e4381c6d71bf,"At gables and party walls, insulation should extend to the wall; if the space between the wall and joist is less than 100mm, perimeter insulation may be required.",{'ID': '170_UK_DocL_V1_ConsrvationOfFuelAndPower'},"At gables and party walls, insulation should extend to the wall; if the <e1>space</e1> between the wall and joist is less than <e2>100mm</e2>, perimeter insulation may be required.",less,annotated
+99a53f17-48cb-4012-a47b-700761e0983b_4,,,Where a new building which is not a residential building or a mixed-use building has more than <e1>90mm</e1> <e2>toilet and washing facility</e2> (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,greater,synthetic
+1085a40e-a3d6-48e2-85ac-8247a26f04f2,Mechanical ventilation systems must be commissioned in accordance with an approved procedure.,{'ID': '35_UK_DocF_V2_Ventilation'},Mechanical <e1>ventilation systems</e1> must be <e2>commissioned in accordance with an approved procedure</e2>.,necessity,annotated
+74b9ee2c-0192-442d-b5a1-a2974d456429,"The dwelling is wheelchair adaptable such that key parts of the accommodation, including sanitary facilities and kitchens, could be easily altered to meet the needs of a wheelchair user or, where required by a local planning authority, the dwelling is wheelchair accessible.",{'ID': '67_UK_DocM_V1_AccessAndUseOfBuildings'},"The dwelling is wheelchair adaptable such that <e1>key parts of the accommodation</e1>, including <e2>sanitary facilities</e2> and kitchens, could be easily altered to meet the needs of a wheelchair user or, where required by a local planning authority, the dwelling is wheelchair accessible.",selection,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",{'ID': '84_Finnish_Health-IndoorClimateAndVentilation'},"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the <e1>combined</e1> air flow, the combined <e2>air flow</e2> is classified under category 2.",none,annotated
+88e23b46-22d9-4be6-87b7-40541f7995a9,"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the distance of the uppermost floor level from the entry level exceeds 24 metres; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",{'ID': '254_Finnish_FireSafety'},"A building shall be provided with a permanently installed <e1>dry riser</e1> that is suitable for its purpose for transporting water for fire extinguishing: 1) in the <e2>premises</e2> above the entry level of the building, when the distance of the uppermost floor level from the entry level exceeds 24 metres; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",necessity,annotated
+a8b3e54e-902c-4502-99a2-8c41d46f1416_6,,,"If there are more than <e1>1m2</e1> <e2>Insulating materials</e2> in a space, they must be linked to one another in at least four groups, unless the chairs are placed around tables.",greater,synthetic
+17d9350b-ba07-405f-bbe3-3b728eab4dee,The facilities suitable for persons with mobility and functional impairment shall be marked  with  the  International  Symbol  of  Access.,{'ID': '62_Finnish_Accessibility'},The <e1>facilities</e1> <e2>suitable for persons with mobility and functional impairment</e2> shall be marked with the International Symbol of Access.,selection,annotated
+a922fe4e-30c9-4fef-a442-27459b959914,Vertical service pipes shall be equipped with mechanical or structural leak detectors at each floor if the service pipes are not visible.,{'ID': '82_Finnish_Health-WaterAndSewerage'},<e1>Vertical</e1> <e2>service pipes</e2> shall be equipped with mechanical or structural leak detectors at each floor if the service pipes are not visible.,selection,annotated
+a2f3a871-91d5-4777-95c9-4744792b3a69,"in an existing building, for the principal or main staff entrance or entrances to be accessible, an alternative accessible entrance should be provided.",{'ID': '61_UK_DocM_V2_AccessAndUseOfBuildings'},"in an existing <e1>building</e1>, for the principal or main staff entrance or entrances to be accessible, an <e2>alternative</e2> accessible entrance should be provided.",none,annotated
+259c1614-77ef-4ae4-a401-83caa603e374,"The main doors for entering a dwelling (usually the front doorset) should be fitted with a multipoint locking system that meets the requirements of: PAS 3621 (key locking on both sides), or PAS 8621 (non-key locking on the internal face), or PAS 10621 (non-key locking on the internal face, but with an external locking override facility).",{'ID': '35_UK_DocQ_Security_Dwellings'},"The <e1>main doors</e1> <e2>for entering a dwelling</e2> (usually the front doorset) should be fitted with a multipoint locking system that meets the requirements of: PAS 3621 (key locking on both sides), or PAS 8621 (non-key locking on the internal face), or PAS 10621 (non-key locking on the internal face, but with an external locking override facility).",selection,annotated
+88e23b46-22d9-4be6-87b7-40541f7995a9,"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the distance of the uppermost floor level from the entry level exceeds 24 metres; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",{'ID': '254_Finnish_FireSafety'},"A <e1>building</e1> shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the distance of the uppermost floor level from the entry level exceeds 24 metres; 2) in the <e2>premises</e2> below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",part-of,annotated
+3724fd47-22f7-432c-81a2-1abcb95c7df2_7,,,"The <e1>parasitic energy use</e1> installed in a dwellings habitable rooms and kitchens should be no fewer than <e2>2.4m</e2>, except in one bedroom properties, where there should be no fewer than four.",greater-equal,synthetic
+86a39a0b-093f-4920-9879-fe7b3ae6675a,"In principle, suitable sanitary accommodation should be available to everybody, including sanitary accommodation designed for wheelchair users, ambulant disabled people, people of either sex with babies and small children or people encumbered by luggage.",{'ID': '155_UK_DocM_V2_AccessAndUseOfBuildings'},"In principle, suitable <e1>sanitary accommodation</e1> should be <e2>available to everybody</e2>, including sanitary accommodation designed for wheelchair users, ambulant disabled people, people of either sex with babies and small children or people encumbered by luggage.",necessity,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_1,,,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under <e1>energy efficiency</e1> <e2>500 millimetres</e2>.",equal,synthetic
+c2e0629d-350b-45b8-9e9e-d58be1780f12_11,,,"If the <e1>community heating primary circuit</e1> has no <e2>structures</e2>, it should be treated as having one bedroom when calculating the ventilation required for the purposes of meeting the ventilation standards.",not-part-of,synthetic
+7d1ada0b-8dcc-4c01-84d7-78b80cb404c9,"If there are not enough associated parking spaces outside of the covered car park to meet the requirement to install electric vehicle charge points, then cable routes should be installed for associated parking spaces within the covered car park.",{'ID': '58_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If there are <e1>not enough</e1> associated parking spaces outside of the covered car park to <e2>meet the requirement to install electric vehicle charge points</e2>, then cable routes should be installed for associated parking spaces within the covered car park.",selection,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_0,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for <e1>load capacity</e1> 1 and <e2>E</e2> if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",equal,synthetic
+1de9d3e5-dee3-42c9-b929-80b7936f1642,The lift shall provide access to the entrance level and each level with entry to a dwelling or a space serving the use of the building.,{'ID': '33_Finnish_Accessibility'},The <e1>lift</e1> shall <e2>provide access</e2> to the entrance level and each level with entry to a dwelling or a space serving the use of the building.,necessity,annotated
+09b2a395-5293-4b7d-82d4-5312482d59e9_6,,,"Door entry controls, where provided, are mounted <e1>300 litres</e1> <e2>automatic flow adjustment</e2> finished ground level, and at least 300mm away from any projecting corner.",equal,synthetic
+6075de3c-d339-4ba4-9945-990480975615_4,,,"Where a kitchen and living room accommodation are not separate rooms (i.e. open plan), no fewer than <e1>two years</e1> <e2>photovoltaic array</e2> of the same equivalent area as for other habitable rooms should be provided within the open-plan space.",greater-equal,synthetic
+113b8bf8-1856-45f5-a54b-d65ef100b437_10,,,"If a gas-fired combination boiler is installed in an existing dwelling, at least <e1>2m</e1> of the following <e2>supports</e2>, appropriate to the system, should be installed.",greater-equal,synthetic
+0da52584-1b37-48b5-840f-3795ae695275,the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,{'ID': '119_UK_DocM_V2_AccessAndUseOfBuildings'},the minimum <e1>clear</e1> dimensions of the platform are: 1100mm wide and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is <e2>enclosed</e2> or where provision is being made for an accompanied wheelchair user.,none,annotated
+56517433-cf40-4b88-a9d4-18e61e0e9993_9,,,"In addition, on both sides of the toilet seat there shall be a <e1>water pressure barrier</e1> of at least <e2>65mm</e2>.",greater-equal,synthetic
+f733b7c9-a406-4f5a-b383-9d3f8b70a559,The selection of relevant critical situations for design should be made reflecting the conditions that can reasonably be foreseen during future use.,{'ID': '5_UK_DocA_Structure'},The <e1>selection</e1> of relevant critical <e2>situations</e2> for design should be made reflecting the conditions that can reasonably be foreseen during future use.,part-of,annotated
+f0c72b35-5a0a-4554-8713-96f6f73a67f1_5,,,A cube with <e1>number of wall ties per square metre</e1> of no more than <e2>1</e2> may pass between the lower edge of a barriers protective part and the landing or the upper surface or edge of a step.,less-equal,synthetic
+113b8bf8-1856-45f5-a54b-d65ef100b437_4,,,"If a gas-fired combination boiler is installed in an existing dwelling, at least <e1>certain proportion</e1> of the following <e2>Unit length</e2>, appropriate to the system, should be installed.",greater-equal,synthetic
+2f89cb06-3ee9-49b5-ac36-46f31ae3928f,Hot water pipework should be insulated in all areas inside and outside the building unless it can be demonstrated that the heat is always useful.,{'ID': '170_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Hot water pipework</e1> should be insulated in all <e2>areas</e2> inside and outside the building unless it can be demonstrated that the heat is always useful.,part-of,annotated
+ec0cd536-6082-48ba-b9e7-8678c02d65a4,Waste water shall be conveyed to the sewer of the water supply plant or for purification property-specifically or to a cesspit.,{'ID': '122_Finnish_Health-WaterAndSewerage'},<e1>Waste water</e1> shall be <e2>conveyed to the sewer of the water supply plant or for purification property-specifically or to a cesspit</e2>.,necessity,annotated
+7d7d55f1-b28d-4ce8-aec6-dd4dc0786ce8,"For sizes of cylinder not listed, the heat loss from the cylinder should not exceed (16.66 8.33 V0.4)/(1000 24), where V is the volume in litres.",{'ID': '208_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For <e1>sizes</e1> of <e2>cylinder</e2> not listed, the heat loss from the cylinder should not exceed (16.66 8.33 V0.4)/(1000 24), where V is the volume in litres.",part-of,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_3,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for <e1>air flow rate</e1> <e2>50</e2> and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",equal,synthetic
+8595e26e-db5c-4d09-9fcf-02b530b61e23,There must be access to each fire compartment of an attic for firefighting operations.,{'ID': '240_Finnish_FireSafety'},There must be <e1>access</e1> to each fire compartment of an attic <e2>for firefighting operations</e2>.,selection,annotated
+fa90c179-d32c-412b-a7d6-a515cc91dbdb,The structure of the exterior wall against the ground must be waterproofed or isolated against water pressure or a structurally managed water removal system allowing the cellar wall to dry in an outward direction must be used to prevent moisture from the surrounding ground and storm water from penetrating the wall structure.,{'ID': '86_Finnish_Health-Humidity'},The structure of the exterior wall against the ground must be waterproofed or isolated against water pressure or a structurally managed <e1>water removal system</e1> <e2>allowing the cellar wall to dry in an outward direction</e2> must be used to prevent moisture from the surrounding ground and storm water from penetrating the wall structure.,selection,annotated
+e21fa967-934e-4a29-a66d-252fdbbf928f,"If the parasitic energy use is unknown, an allowance of 0.3W/m2 should be made for any control system.",{'ID': '473_UK_DocM_V2_AccessAndUseOfBuildings'},"If the parasitic energy use is unknown, an <e1>allowance</e1> of <e2>0.3W/m2</e2> should be made for any control system.",equal,annotated
+3ca5cb38-b90b-4449-ba14-4268866df8e1_2,,,The water heater is close to the draw-off points and has a <e1>results</e1> no greater than <e2>24 degrees Celsius</e2>.,less-equal,synthetic
+46f5be2a-1514-420b-bc39-331fc6e0d2df_5,,,"The dwelling primary energy rate, dwelling emission rate and <e1>step</e1>, all calculated using the measured air permeability, must not be higher than the target primary energy rate, target emission rate and <e2>vicinity</e2>, respectively.",less-equal,synthetic
+a4dc06ab-99c3-4c8b-b295-eb3e6a64320a_9,,,"The free <e1>energy efficiency measures</e1> from the ground or from the surface of a driveway or walkway of the lower edge of a structural element, device or equipment protruding from the building, such as a balcony, bay window, sign, lighting device or awning, must be at least <e2>01:20:00</e2>, unless the area is protected so as to prevent the danger of collision.",greater-equal,synthetic
+16f6f10e-f32f-48b2-85f9-123cdb5448ee,Any unavoidable gaps between boards should be infilled using compressible tape (e.g. for boards within roof rafters) or low expansion foam (e.g. for boards within wall cavities).,{'ID': '147_UK_DocL_V1_ConsrvationOfFuelAndPower'},Any <e1>unavoidable</e1> <e2>gaps</e2> between boards should be infilled using compressible tape (e.g. for boards within roof rafters) or low expansion foam (e.g. for boards within wall cavities).,selection,annotated
+0da52584-1b37-48b5-840f-3795ae695275_9,,,the minimum clear dimensions of the platform are: 1100mm wide and <e1>0.05</e1> <e2>reception</e2> where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+9eb5bf01-3810-44e3-802b-7c7eadad1831,"Mechanical ventilation systems, including both continuous and intermittent mechanical ventilation, should be designed and installed to minimise noise.",{'ID': '21_UK_DocF_V1_Ventilation'},"Mechanical <e1>ventilation systems</e1>, including both continuous and intermittent mechanical ventilation, should be <e2>designed and installed to minimise noise</e2>.",necessity,annotated
+636bce88-fd3b-4e5a-9f6a-4aa0d3d1bfa4_3,,,"Where a new building contains more than <e1>EI 15</e1> <e2>free area</e2>, a common access point for a gigabit-capable public electronic communications network is required as a part of the buildings gigabit-ready physical infrastructure.",greater,synthetic
+26980508-105c-49db-8595-bf001a48d757_4,,,"In <e1>baby changing facilities</e1> with no fixed seats or <e2>justification</e2>, the number of persons shall be calculated to be two persons per square metre.",not-part-of,synthetic
+54f4e30f-d171-4156-ae87-7aed3541dd18,Insulated cavity closers should be used for all construction types.,{'ID': '165_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Insulated</e1> <e2>cavity closers</e2> should be used for all construction types.,selection,annotated
+4094b859-b3b4-4035-94cd-8cf47ccbd801_4,,,The <e1>primary energy</e1> is at least <e2>25mm</e2>.,greater-equal,synthetic
+bde1697a-20c9-4f15-a63c-5be323a058c1_1,,,Any connection of <e1>0.15</e1> or more <e2>Extract air</e2> to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,greater-equal,synthetic
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_8,,,"The free opening of the vertical hatch or window of an emergency exit must be at least <e1>14 metres</e1> in <e2>dwelling emission rate</e2> and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",greater-equal,synthetic
+56166e36-b14b-4632-9767-70b71d335d9c,"When a dwelling undergoes a major renovation, the technical, environmental and economic feasibility of installing high-efficiency alternative systems should be considered.",{'ID': '98_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When a <e1>dwelling</e1> undergoes a major renovation, the technical, environmental and economic <e2>feasibility of installing high-efficiency alternative systems</e2> should be considered.",necessity,annotated
+a0c838b5-5fe2-4b52-abe1-432804c2c8aa_0,,,A <e1>measures</e1> of 21 C shall be used as the <e2>Air flow rates</e2> for room temperature during the heating season.,equal,synthetic
+72e7ed0c-9e73-46b2-a919-20f3fea337fd_6,,,"An <e1>attic</e1> with a potentially flammable or explosive atmosphere must not be located in a <e2>loading docks</e2> where there are dwellings, accommodation premises, institutions or assembly and business premises.",not-part-of,synthetic
+8aa4b706-1659-4e30-a4fe-e7f33efe3241_9,,,All <e1>600kg/m3</e1> <e2>Ventilation systems</e2> of the compliance checklist should be completed.,equal,synthetic
+77be05f2-cd8c-4d35-85e4-6637b999d8e7_10,,,The <e1>Air permeability</e1> of the consequential improvement works should not be less than <e2>40</e2> of the value of the principal works.,greater-equal,synthetic
+4e8c5c50-44af-48f6-b959-e6f9b31afa1e_4,,,"If the planned time of use of a modular or portable building in a single location is less than two years, the only practical <e1>handrail</e1> may be <e2>speed glandless circulators</e2>.",equal,synthetic
+56166e36-b14b-4632-9767-70b71d335d9c,"When a dwelling undergoes a major renovation, the technical, environmental and economic feasibility of installing high-efficiency alternative systems should be considered.",{'ID': '98_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When a dwelling undergoes a major renovation, the <e1>technical</e1>, environmental and economic <e2>feasibility of installing high-efficiency alternative systems</e2> should be considered.",selection,annotated
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c_4,,,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be <e1>presence</e1> <e2>9 metres</e2>.",equal,synthetic
+3c28dbd6-8a3d-4ede-ae08-89e4b5d69d60,The approach route is a minimum of 900mm wide with a maximum cross fall of 1 in 40.,{'ID': '16_UK_DocM_V1_AccessAndUseOfBuildings'},The approach route is a minimum of 900mm wide with a maximum <e1>cross fall</e1> of <e2>1 in 40</e2>.,less-equal,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479_7,,,Individual flights are: for <e1>energy efficiency</e1> up to <e2>90</e2> not more than 10m long; for gradients up to 1:12 not more than 5m long.,less-equal,synthetic
+079db365-cfed-474e-9329-25349ac0db4a_0,,,"In connection with the door of an outside space of an individual dwelling the <e1>manufacturers declared efficiencies</e1> outside the door may be more than <e2>50</e2> if the level difference can, with reasonable effort, be eliminated with equipment in the outdoor space.",greater,synthetic
+e32bbb47-c826-40c1-8ea4-8c32353d3fd2_5,,,There shall be <e1>500 millimetres</e1> of <e2>rain-water</e2> provided for people in the building.,equal,synthetic
+08efb7a8-1f9e-491b-8a6f-7043ec96ea3b,The methodology for determining costs should be consistent between all elements of the calculation to allow a fair comparison between the cost of the major renovation and the cost of electric vehicle charge point infrastructure.,{'ID': '54_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},The <e1>methodology</e1> for <e2>determining costs</e2> should be consistent between all elements of the calculation to allow a fair comparison between the cost of the major renovation and the cost of electric vehicle charge point infrastructure.,selection,annotated
+75c60084-6878-472d-8694-e8739e0dd76c_1,,,The <e1>annual percentage of heat</e1> of access routes in assembly areas with a maximum capacity of 60 persons must be at least <e2>two years</e2>.,greater-equal,synthetic
+dd056285-1aa4-4c6d-94ac-b911458cb7ea,"Where any of the parking spaces for new buildings other than residential or mixed-use buildings are in a covered car park, the requirement to install an electric vehicle charge point should be met by installing a charge point in a parking space that is not within a covered car park.",{'ID': '70_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where any of the parking spaces for new buildings <e1>other than residential or mixed-use buildings</e1> are in a covered <e2>car park</e2>, the requirement to install an electric vehicle charge point should be met by installing a charge point in a parking space that is not within a covered car park.",none,annotated
+4abb3268-3ba6-47e8-a8b7-4676dbaa9a16,"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide all means of escape routes with a minimum clear headroom of 2m, except in doorways.",{'ID': '28_UK_DocK_ProtectionFromFalling'},"For buildings other than dwellings and for common access areas in <e1>buildings</e1> <e2>that contain flats</e2>, Provide all means of escape routes with a minimum clear headroom of 2m, except in doorways.",selection,annotated
+0fdce0b1-7992-401f-aa84-ad7f2acca23d,Cavity walls: the inner block leaf mortar joint should be fully filled and pointed within the cavity.,{'ID': '184_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Cavity walls</e1>: the inner block leaf mortar joint should be <e2>fully filled</e2> and pointed within the cavity.,none,annotated
+0cafda73-ee3a-4a99-a224-2d142de63618,"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",{'ID': '238_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a wet heating system is either: a. newly installed b. fully replaced in an <e1>existing</e1> building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that <e2>meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower</e2>.",none,annotated
+43a7a088-718f-4a11-a392-88e71559466e,"In exceptional circumstances in an existing building, a wheelchair platform stairlift may be considered, provided its installation does not conflict with requirements for means of escape.",{'ID': '107_UK_DocM_V2_AccessAndUseOfBuildings'},"In <e1>exceptional circumstances</e1> in an <e2>existing</e2> building, a wheelchair platform stairlift may be considered, provided its installation does not conflict with requirements for means of escape.",none,annotated
+28c47652-47a0-4fa4-8343-beee0af2691c,"Large  roof  surfaces  must  be  divided  into  parts  of  no  more  than  2,400 square  metres.",{'ID': '181_Finnish_FireSafety'},"Large roof <e1>surfaces</e1> must be <e2>divided into parts of no more than 2,400 square metres</e2>.",necessity,annotated
+1c511111-ab71-4b68-9421-f588bc4b9180,"People with visual impairment should be in no doubt as to the location of glass doors, especially when they are within a glazed screen.",{'ID': '76_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>People</e1> with visual impairment should <e2>be in no doubt as to the location of glass doors, especially when they are within a glazed screen</e2>.",necessity,annotated
+61bc1c7a-62f8-43c1-9c71-6e3073695cbe,"Roofs: insulation should be installed tight to the structure, without air gaps, and should extend to the wall insulation.",{'ID': '143_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Roofs: <e1>insulation</e1> should be installed tight to the structure, without air gaps, and should <e2>extend to the wall insulation</e2>.",necessity,annotated
+5e7d4831-4ec8-48f9-9e60-0422fcc1eae4,"When replacing an existing system, the installed generation capacity of the new system should be no less than that of the existing system, except where a smaller system can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",{'ID': '344_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When replacing an existing system, the installed generation capacity of the new system should be no less than <e1>that</e1> of the existing <e2>system</e2>, except where a smaller system can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",part-of,annotated
+7d877df3-9aa7-4dff-a64d-5356a66c944d,"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a width exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",{'ID': '59_Finnish_SafetyOfUse'},"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or <e1>ramps</e1> that have a <e2>width</e2> exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",part-of,annotated
+aa41a5d4-c0b1-4da7-84a0-5c2e2738654f_6,,,The total number of ventilators installed in the dwellings habitable rooms and kitchens should be at least the following: Five ventilators if the dwelling has more than <e1>4</e1> <e2>battery storage</e2>.,greater,synthetic
+43e26628-8b62-4cc6-91e2-284335df1564_2,,,"In rooms used for sleeping or rest, the <e1>shallow projecting</e1> may not exceed <e2>half a metre</e2>.",less-equal,synthetic
+239bd568-c5f2-4ab5-955c-f2d8d86b7b7f,"Where closing devices are needed for fire control, electrically powered hold-open devices or swing-free closing devices should be used as appropriate.",{'ID': '90_UK_DocM_V2_AccessAndUseOfBuildings'},"Where <e1>closing devices</e1> are <e2>needed for fire control</e2>, electrically powered hold-open devices or swing-free closing devices should be used as appropriate.",selection,annotated
+13a437c0-918c-47f2-85bd-b80dd69eb027_2,,,"There are no <e1>air tightness</e1> on the <e2>diameter</e2> of display windows and similar glazing, but for new buildings their impact must be taken into account in the calculation of primary energy and CO2 emissions.",not-part-of,synthetic
+c766f874-d4aa-45b8-89f7-20b08db787c6,The total height of the barrier must be one metre if the drop is no more than six metres.,{'ID': '43_Finnish_SafetyOfUse'},The total <e1>height</e1> of the <e2>barrier</e2> must be one metre if the drop is no more than six metres.,part-of,annotated
+f5a71c7b-e852-40f2-8f88-91cda7902a7e_9,,,"If a new building has a space heating or airconditioning system with an <e1>proportion</e1> greater than <e2>15</e2>, a building automation and control system should be installed.",greater,synthetic
+fb1da22f-8ddb-4399-b441-64dca68da9af,"If a lift or other device for moving between levels is installed in the exit of an existing building, the dwellings exit may be no less than 850 millimetres wide.",{'ID': '218_Finnish_FireSafety'},"If a lift or other device for moving between levels is installed in the exit of an existing building, the <e1>dwellings</e1> <e2>exit</e2> may be no less than 850 millimetres wide.",part-of,annotated
+d3fc8c9b-c23a-4188-8723-369caa90453c_7,,,"The <e1>steps</e1> for a building's total combined window area is <e2>30% load</e2> of the sum total of the floor plate areas of the buildings storeys that are fully or in part above the ground but, however, at most 50 of the building's facade area.",equal,synthetic
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_10,,,Skirtings totalling up to 50mm total thickness and shallow projecting <e1>floor level</e1> or casings above <e2>900 millimetres</e2> may be discounted when measuring clear width.,greater,synthetic
+0262f6e5-21bc-4312-9388-8ac93b79416d_7,,,The minimum full <e1>energy efficiency</e1> of the absorption chillers should be no worse than <e2>0.055555556</e2>.,greater-equal,synthetic
+339fc78c-a2f2-481c-a410-3aeb41e24b8a,Solid walls constructed of coursed brickwork or blockwork should be at least as thick as 1/16 of the storey height.,{'ID': '32_UK_DocA_Structure'},Solid walls constructed of coursed brickwork or blockwork should be at least as thick as 1/16 of the <e1>storey</e1> <e2>height</e2>.,part-of,annotated
+17d9350b-ba07-405f-bbe3-3b728eab4dee,The facilities suitable for persons with mobility and functional impairment shall be marked  with  the  International  Symbol  of  Access.,{'ID': '62_Finnish_Accessibility'},The <e1>facilities</e1> suitable for persons with mobility and functional impairment shall be <e2>marked with the International Symbol of Access</e2>.,necessity,annotated
+4fc3b5b1-a838-4429-b385-d8e80e6633eb_11,,,"In the absence of relevant harmonised European Standards, products with a <e1>facade area</e1> exceeding <e2>20</e2> must have a product certificate issued by a Notified Body.",greater,synthetic
+ec2e84a5-89bc-4c16-9a55-1965efd13981,"Wall insulation should be installed to the top of the wall plate; in some places, such as the eaves, this may be above the cavity closure or barrier.",{'ID': '167_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Wall insulation should be installed to the top of the wall plate; in some <e1>places</e1>, such as the <e2>eaves</e2>, this may be above the cavity closure or barrier.",selection,annotated
+536b172d-ccd1-479a-8136-6ee05db0f264,"Where pipework is above ground, the performance of the pipe insulation should be at least as high as the insulating performance of pipework in the buried part of the system.",{'ID': '205_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where pipework is above ground, the performance of the pipe <e1>insulation</e1> should be at least as high as the <e2>insulating performance</e2> of pipework in the buried part of the system.",greater-equal,annotated
+d0b6759e-deec-451d-bd7a-ec65b96048be_11,,,"extract air of <e1>speed</e1> <e2>20 degrees Celsius</e2> shall be conducted through individual ducts, or common ducts serving spaces of the same type as regards level of air purity, to the outdoors, into a collection duct installed above the spaces it serves or into an extract air chamber.",equal,synthetic
+86350df0-a40e-412b-a301-004524d56736_0,,,"For wet heating systems in new dwellings with a <e1>design value</e1> of <e2>E 15</e2> or greater, a minimum of two independently controlled heating circuits should be provided.",greater-equal,synthetic
+d04d6702-5170-4b50-9bda-7367a24e9322,"NOTE: The network distribution point could be in a cabinet, a box mounted on a wall or on a telegraph pole.",{'ID': '5_UK_DocR_V1_InfrastructureForElectircalCommunications'},"NOTE: The <e1>network distribution point</e1> could be in a <e2>cabinet</e2>, a box mounted on a wall or on a telegraph pole.",necessity,annotated
+4abb3268-3ba6-47e8-a8b7-4676dbaa9a16_5,,,"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide all means of escape routes with a minimum clear <e1>total cost</e1> of <e2>90mm</e2>, except in doorways.",equal,synthetic
+33d3a432-5793-4102-ba93-da485c334abd,The termination points of cable duct should be sited where access to maintain in future is unrestricted.,{'ID': '113_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},The <e1>termination points</e1> of cable duct should be <e2>sited where access to maintain in future is unrestricted</e2>.,necessity,annotated
+d342429e-d3fc-46e0-a195-527cfef1fd4b_11,,,"When an existing building with a total useful <e1>access</e1> of over <e2>1.2W/(m2K)</e2> is being extended or the habitable area is being increased, consequential improvements should be installed.",greater,synthetic
+8aa4b706-1659-4e30-a4fe-e7f33efe3241_2,,,All <e1>five</e1> <e2>commercial part</e2> of the compliance checklist should be completed.,equal,synthetic
+ed2cca4a-50f7-470d-9752-dd8722385a24,"In dwellings and other premises that are used by children, restrictors must be installed on windows and other openings where there may be a danger of falling, and these must be such that they limit the easy opening of the window to 100 millimetres.",{'ID': '80_Finnish_SafetyOfUse'},"In dwellings and other premises that are used by children, restrictors must be installed on windows and other <e1>openings</e1> where there may be a <e2>danger of falling</e2>, and these must be such that they limit the easy opening of the window to 100 millimetres.",selection,annotated
+8cef7dc5-2d76-4dd8-80c5-6861b11a8f6f_7,,,"Where the work concerns a building containing more than <e1>eight per cent</e1> <e2>Controls</e2>, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",greater,synthetic
+eefe1191-2903-4fb8-9138-6471e09fb67d_4,,,The <e1>Level differences</e1> exceeds <e2>10</e2> at 11pm.,greater,synthetic
+1320873f-de9b-4c55-a7c0-67f545c4a46e,"All access routes to principal, or alternative accessible, entrances should be surfaced so that people are able to travel along them easily, without excessive effort and without the risk of tripping or falling.",{'ID': '42_UK_DocM_V2_AccessAndUseOfBuildings'},"All access routes to principal, or alternative accessible, entrances should be <e1>surfaced</e1> so that <e2>people are able to travel along them easily, without excessive effort and without the risk of tripping or falling</e2>.",selection,annotated
+0cafda73-ee3a-4a99-a224-2d142de63618,"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",{'ID': '238_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all <e1>parts</e1> of the <e2>system</e2> including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",part-of,annotated
+835d8fad-7a27-4299-aa38-a5b1771a6779,"In large building complexes, such as retail parks and large sports centres, there should be one wheelchair-accessible unisex toilet capable of including an adult changing table.",{'ID': '178_UK_DocM_V2_AccessAndUseOfBuildings'},"In large building complexes, such as retail parks and large sports centres, there should be one wheelchair-accessible <e1>unisex</e1> <e2>toilet</e2> capable of including an adult changing table.",selection,annotated
+2f815a08-db3c-48a6-b248-d69aeac870ee_1,,,"the vertical <e1>steps</e1> is: a. not more than <e2>EI 30</e2>, where there is no liftway enclosure and no floor penetration; b. more than 2m, where there is a liftway enclosure.",less-equal,synthetic
+b5d2186d-338d-40b6-b3b4-7fadf3cfd4e0,"For district cooling schemes, the CO2 and primary energy content of the cooling energy supplied should be calculated.",{'ID': '286_UK_DocM_V2_AccessAndUseOfBuildings'},"For district cooling schemes, the <e1>CO2</e1> and primary energy content of the <e2>cooling energy</e2> supplied should be calculated.",part-of,annotated
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab_0,,,"If the <e1>side edges</e1> of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds <e2>EI 15</e2> of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",greater,synthetic
+3724fd47-22f7-432c-81a2-1abcb95c7df2_4,,,"The <e1>that</e1> installed in a dwellings habitable rooms and kitchens should be no fewer than <e2>44mm</e2>, except in one bedroom properties, where there should be no fewer than four.",greater-equal,synthetic
+ec381965-2539-4bd6-9260-e667b4746a3a,To reduce the risks to the health of persons in buildings formaldehyde fumes given off by urea formaldehyde foams should not penetrate to occupied parts of buildings to an extent which would give rise to an irritant concentration.,{'ID': '4_UK_DocD_ToxicSubstances'},<e1>To reduce the risks to the health of persons in buildings</e1> formaldehyde fumes given off by urea formaldehyde foams should <e2>not penetrate to occupied parts of buildings to an extent which would give rise to an irritant concentration</e2>.,selection,annotated
+5fa7daca-cb50-4397-a736-617e52d30187_6,,,"If <e1>breaking</e1> at below 30% are required and unavailable, the <e2>heat exchanger area</e2> may be taken as equal to that at 30% load.",equal,synthetic
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be class E 15.",{'ID': '134_Finnish_FireSafety'},"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding two storeys is EI 30; however, minor <e1>sealing parts</e1> and penetrations may be <e2>class</e2> E 15.",part-of,annotated
+06c2e0f7-69c8-47ec-bf31-9902ae9df7cf,"Provision shall be made for any windows, skylights, or any transparent or translucent walls, ceilings or roofs to be safely accessible for cleaning.",{'ID': '109_UK_DocK_ProtectionFromFalling'},"Provision shall be made for any windows, <e1>skylights</e1>, or any transparent or translucent walls, ceilings or roofs to <e2>be safely accessible for cleaning</e2>.",necessity,annotated
+20518e80-6f7e-457f-8c5a-59fa4c0eb324,"When calculating the heat loss for a buildings design solution, the design value shall be used as the value of the air leakage rate figure for the building envelope.",{'ID': '137_Finnish_EnergyEfficiency'},"When calculating the heat loss for a buildings design solution, the <e1>design value</e1> shall be used as the value of the <e2>air leakage rate figure</e2> for the building envelope.",equal,annotated
+868ad193-b0d2-47b9-9fe0-ded5b761d3b0,The integrity of the water system shall be ensured with pressure testing using water.,{'ID': '106_Finnish_Health-WaterAndSewerage'},The <e1>integrity</e1> of the water system shall be <e2>ensured with pressure testing using water</e2>.,necessity,annotated
+793cb939-b3d9-46eb-ae65-71a4d5c8031b_3,,,Where the parking is within the private curtilage of the dwelling (but not within a carport or garage) at least one space is a standard parking bay that can be <e1>side</e1> to <e2>200 millimetres</e2>.,less-equal,synthetic
+4ee66fa0-9dcc-4332-b001-f1aec49d9af9,It should be recognised that there is the danger where adjacent spaces each have an induction loop system that the signals may overlap.,{'ID': '154_UK_DocM_V2_AccessAndUseOfBuildings'},It should be recognised that there is the danger where adjacent <e1>spaces</e1> each have an induction loop system that <e2>the signals may overlap</e2>.,none,annotated
+bfdf95da-d422-47cd-83d7-a30a4969f2e6_1,,,"If the internal ties must be centred on the supporting line, the minimum value of the <e1>service</e1>, <e2>10m</e2>, will also be applied to internal ties.",greater-equal,synthetic
+70292367-f940-4ca6-b35f-b47bd4e66cd3,Cable routes must still be provided for a minimum of one in five parking spaces.,{'ID': '71_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},Cable routes must still be provided for a minimum of one in <e1>five</e1> <e2>parking spaces</e2>.,selection,annotated
+8805ec9f-3f5f-44fc-9078-3ae62439c973,"NOTE: When a single U-value is calculated for a product range of doors, the configuration of the door chosen for the calculation should be the worst performing in the product range.",{'ID': '108_UK_DocL_V1_ConsrvationOfFuelAndPower'},"NOTE: When a single U-value is calculated for a product range of doors, the configuration of the <e1>door</e1> chosen for the calculation should be the <e2>worst performing in the product range</e2>.",none,annotated
+21d5baaf-1c54-43ac-ac3e-992c5fa20f10,Units should be draught-proofed.,{'ID': '418_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Units</e1> should be <e2>draught-proofed</e2>.,necessity,annotated
+d925c189-860a-4fcb-ae88-d1cf8cc14fb8_1,,,"The tread of steps in covered or heated outdoor staircases must be no less than 300 millimetres, and the <e1>primary energy content</e1> may be no more than <e2>0.15m/s</e2>.",less-equal,synthetic
+525aa713-65e1-4368-a6f4-38f628be7fed,"in clothes shops, the dimensions and fittings recommended for an individual changing cubicle in a sports building should be provided.",{'ID': '177_UK_DocM_V2_AccessAndUseOfBuildings'},"in <e1>clothes shops</e1>, the dimensions and fittings recommended for an individual changing cubicle in a sports <e2>building</e2> should be provided.",part-of,annotated
+cf35d4a4-3170-421b-9be1-b68d928eed1d_6,,,"A roof with a <e1>directions</e1> greater than <e2>0.5 kN/m2</e2> must be constructed making appropriate use of walkways, roof ladders, safety ladders, roof stairs, roof treads and foot rails.",greater,synthetic
+339fc78c-a2f2-481c-a410-3aeb41e24b8a_2,,,Solid walls constructed of coursed brickwork or blockwork should be at least as <e1>steps</e1> as <e2>300mm</e2> of the storey height.,greater-equal,synthetic
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_6,,,"If the air flows of <e1>both sides</e1> <e2>three</e2> and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+0da52584-1b37-48b5-840f-3795ae695275_5,,,the minimum clear dimensions of the platform are: <e1>50 m</e1> <e2>shape</e2> and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+0cfe8c0e-45e4-4c4c-bf9b-906e26e28c75,"There should be sufficient space for people to approach the building, pass others who are travelling in the opposite direction and carry out all necessary manoeuvres.",{'ID': '43_UK_DocM_V2_AccessAndUseOfBuildings'},"There should be sufficient <e1>space</e1> for people to approach the building, <e2>pass others who are travelling in the opposite direction</e2> and carry out all necessary manoeuvres.",selection,annotated
+cc72106e-9e7f-47cf-8a95-0173a8305dad_2,,,"In a new building, the crawl space <e1>differences</e1> must be <e2>2.4m</e2> on average at the minimum.",greater-equal,synthetic
+569c7958-b7d6-4b9c-9dd9-13307e95e59b_4,,,"For ducted systems that are served by fans with a <e1>continuity</e1> greater than <e2>21 C</e2>, ductwork leakage tests should be carried out.",greater,synthetic
+563cd5fb-adc9-4bde-8b34-4accc93ac84b,"Systems should not be significantly oversized in most circumstances, the cooling appliance should not be sized for more than 120 of the design cooling load.",{'ID': '331_UK_DocL_V1_ConsrvationOfFuelAndPower'},"<e1>Systems</e1> should not be significantly oversized in most circumstances, the <e2>cooling appliance</e2> should not be sized for more than 120 of the design cooling load.",part-of,annotated
+4e4fdf56-c45b-4d89-b18f-7a2f24a41ba9,"In spaces intended for more than 60 persons, the width of the access route must be at least 1,200 millimetres.",{'ID': '116_Finnish_SafetyOfUse'},"In spaces <e1>intended for more than 60 persons</e1>, the <e2>width</e2> of the access route must be at least 1,200 millimetres.",none,annotated
+316c89ee-aa42-4e7a-9372-960cf25b3265,Extract ventilation may be by natural means or by mechanical means (e.g. by an extract fan or acentral system).,{'ID': '105_UK_DocF_V2_Ventilation'},<e1>Extract</e1> ventilation may be by natural <e2>means</e2> or by mechanical means (e.g. by an extract fan or acentral system).,necessity,annotated
+88e23b46-22d9-4be6-87b7-40541f7995a9,"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the distance of the uppermost floor level from the entry level exceeds 24 metres; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",{'ID': '254_Finnish_FireSafety'},"A building shall be provided with a permanently installed <e1>dry riser</e1> that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises <e2>above the entry level of the building</e2>, when the distance of the uppermost floor level from the entry level exceeds 24 metres; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",none,annotated
+8efb6108-e49e-4d64-a1e4-22e3f9128b17_3,,,"When calculating the reference heat loss of a building, the value of <e1>0.7W/(m2K)</e1> shall be used as the <e2>tie force</e2> for the air leakage rate figure for the building envelope.",equal,synthetic
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9,"In buildings more than 9 metres and at most 28 metres in height, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",{'ID': '126_Finnish_SafetyOfUse'},"In buildings more than 9 metres and at most 28 metres in height, the attic and <e1>roof</e1> must be <e2>accessible via the interior and exterior of the building</e2>; in buildings more than 28 metres in height, these must be accessible via the interior.",necessity,annotated
+fac44f87-4eb9-4f56-998c-74efa9512309,"If air barriers or vapour barriers have been used in the structure, the seams, edges and penetrations must be tight.",{'ID': '106_Finnish_Health-Humidity'},"If air barriers or vapour barriers have been used in the structure, the <e1>seams</e1>, edges and penetrations must be <e2>tight</e2>.",necessity,annotated
+39a37d5e-3361-43b9-a209-e5cd45918abc,"For mixed-use buildings which have parking spaces within a covered car park, any requirements to install electric vehicle charge points or cable routes must first be applied to those parking spaces outside the covered car park.",{'ID': '95_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"For mixed-use buildings which have parking spaces within a covered car park, any <e1>requirements</e1> to install electric vehicle charge points or cable routes must <e2>first be applied to those parking spaces outside the covered car park</e2>.",necessity,annotated
+53e31e26-a39b-4047-a86e-bdb8021413e8,Window handles on windows that open outwards are not more than 650mm from the inside face of the wall when the window is at its maximum openable angle.,{'ID': '84_UK_DocO_Overheating'},Window handles on <e1>windows</e1> that <e2>open outwards</e2> are not more than 650mm from the inside face of the wall when the window is at its maximum openable angle.,selection,annotated
+8fec1c4a-527e-49b6-9267-89ff700a9291,"Where membranes are penetrated, careful detailing should be used to achieve a robust and durable seal at these penetrations.",{'ID': '182_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where membranes are penetrated, <e1>careful</e1> <e2>detailing</e2> should be used to achieve a robust and durable seal at these penetrations.",selection,annotated
+d504fd87-d13d-4936-9d7a-71d17954760d_8,,,The <e1>rated speed</e1> of the steps in an exit may be no more than <e2>1.2W/(m2K)</e2>.,less-equal,synthetic
+aa7c5790-2189-451d-bd0e-956a257a7b6d,"In an existing system, when a boiler or hot water storage vessel is replaced, any accessible pipes in the dwelling should be insulated.",{'ID': '201_UK_DocL_V1_ConsrvationOfFuelAndPower'},"In an existing system, when a boiler or <e1>hot water storage vessel</e1> is <e2>replaced</e2>, any accessible pipes in the dwelling should be insulated.",selection,annotated
+2c725d50-13d5-4e77-bacf-9f174530e27c,The energy efficiency of historic and traditional buildings should be improved only if doing so will not cause long-term deterioration of the buildings fabric or fittings.,{'ID': '17_UK_DocM_V2_AccessAndUseOfBuildings'},The energy efficiency of historic and <e1>traditional</e1> <e2>buildings</e2> should be improved only if doing so will not cause long-term deterioration of the buildings fabric or fittings.,selection,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",{'ID': '83_Finnish_SafetyOfUse'},"The free <e1>opening</e1> of the vertical hatch or <e2>window</e2> of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",part-of,annotated
+2f815a08-db3c-48a6-b248-d69aeac870ee_2,,,"the vertical <e1>gradients</e1> is: a. not more than <e2>four</e2>, where there is no liftway enclosure and no floor penetration; b. more than 2m, where there is a liftway enclosure.",less-equal,synthetic
+c7035b48-7244-40a9-a70e-1d244caf72ac,"The same approved calculation tool must be used to calculate the target primary energy rate, target emission rate and target fabric energy efficiency rate and the dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate.",{'ID': '56_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The same <e1>approved</e1> <e2>calculation tool</e2> must be used to calculate the target primary energy rate, target emission rate and target fabric energy efficiency rate and the dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate.",selection,annotated
+8b7e8e7e-81dd-4a76-bdd3-8269ac00f74b,The system can be overridden by a door reactivating device that relies on appropriate electronic methods (but not a door edge pressure system); provided that the lift door remains fully open for at least three seconds.,{'ID': '24_UK_DocM_V1_AccessAndUseOfBuildings'},The system can be overridden by a door reactivating device that relies on appropriate electronic methods (but not a door edge pressure system); provided that the <e1>lift door</e1> <e2>remains fully open</e2> for at least three seconds.,necessity,annotated
+fb5d3054-4911-4049-ba09-1c3e80f9c07c_5,,,"The <e1>maintained</e1> of steps in uncovered or unheated outdoor staircases must be no less than <e2>adequate means</e2>, and the riser may be no more than 130 millimetres.",greater-equal,synthetic
+993e54cc-49c3-43cb-995e-1a951c93c775_8,,,"When a warning sign is not posted, the areas shall be designed to an axle load Qk and also to an <e1>service</e1> equal to <e2>1</e2>.",equal,synthetic
+fac44f87-4eb9-4f56-998c-74efa9512309,"If air barriers or vapour barriers have been used in the structure, the seams, edges and penetrations must be tight.",{'ID': '106_Finnish_Health-Humidity'},"If air barriers or vapour barriers have been used in the <e1>structure</e1>, the <e2>seams</e2>, edges and penetrations must be tight.",none,annotated
+10b37d1a-a0b5-4dfb-8bcc-39317d144580,"On variable volume systems, variable speed glandless circulators should be used.",{'ID': '289_UK_DocM_V2_AccessAndUseOfBuildings'},"On variable volume systems, <e1>variable</e1> <e2>speed glandless circulators</e2> should be used.",selection,annotated
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_10,,,"Skirtings totalling up to <e1>2,100 millimetres</e1> <e2>vertical spacing</e2> and shallow projecting ducts or casings above 1800mm may be discounted when measuring clear width.",less-equal,synthetic
+c0a6d35c-cc20-428b-941d-c3e3e6365c74_0,,,"In a tier that is uninterrupted by cross-gangways, and where the <e1>structure</e1> exceeds <e2>1,200 MJ/m2</e2>, use a maximum number of steps of 40.",greater,synthetic
+5925ca4d-801c-42e4-b581-a176dea2519f,"If thermal energy is supplied from a district heat network, a CO2 emission factor and primary energy factor for the heat delivered to the dwelling by the district heat network should be calculated.",{'ID': '76_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If thermal energy is supplied from a district heat network, a CO2 emission factor and primary energy factor for the <e1>heat</e1> <e2>delivered to the dwelling by the district heat network</e2> should be calculated.",selection,annotated
+339fc78c-a2f2-481c-a410-3aeb41e24b8a,Solid walls constructed of coursed brickwork or blockwork should be at least as thick as 1/16 of the storey height.,{'ID': '32_UK_DocA_Structure'},Solid walls constructed of coursed brickwork or blockwork should be at least as <e1>thick</e1> as <e2>1/16</e2> of the storey height.,greater-equal,annotated
+09b2a395-5293-4b7d-82d4-5312482d59e9_5,,,"Door entry controls, where provided, are mounted 900-1000mm above finished ground level, and at least <e1>0.15m/s</e1> <e2>flushing</e2> from any projecting corner.",greater-equal,synthetic
+8e5e9560-4b22-4fe0-ad86-e52b82ffe4d2,"When  calculating  the  energy  consumption  of  a  buildings  cooling  system,  the  energy consumption of cooling energy production and the electrical energy consumption of auxiliary units  shall  be  taken  into  account  where  the  use  of  the  systems  is  required  for  indoor temperature control.",{'ID': '111_Finnish_EnergyEfficiency'},"When calculating the energy consumption of a buildings cooling system, the energy consumption of <e1>cooling energy production</e1> and the electrical <e2>energy consumption</e2> of auxiliary units shall be taken into account where the use of the systems is required for indoor temperature control.",none,annotated
+eeb4239f-3819-475c-ad20-756bed80c4ff_6,,,"In reference heat loss calculations, the value used as the <e1>number of wall ties per square metre</e1> of the buildings ventilation system shall be <e2>E</e2>.",equal,synthetic
+d796dece-45f6-4527-a151-c59b007e9028,"A safe and marked access route must be reserved for pedestrians in connection with vehicle traffic and goods transport routes, doors and gates in the yards of buildings other than single-family houses, if pedestrian traffic through them is necessary.",{'ID': '132_Finnish_SafetyOfUse'},"A safe and marked access route must be reserved for pedestrians in connection with vehicle traffic and goods transport routes, doors and gates in the yards of buildings other than single-family houses, if <e1>pedestrian traffic</e1> through them is <e2>necessary</e2>.",selection,annotated
+e8340500-38b6-461b-b00d-d3aa44ac1f0b_9,,,The <e1>flow rate</e1> of the water available from the hot water system may not exceed <e2>20 millimetres</e2>.,less-equal,synthetic
+a43037b0-8e35-45a2-9f23-c2d65f6c5a64,"Where access to the dwelling can be gained via an interconnecting doorset from the garage, then either the garage doorset (pedestrian and vehicular) or the interconnecting doorset should be a secure doorset.",{'ID': '8_UK_DocQ_Security_Dwellings'},"Where <e1>access</e1> to the <e2>dwelling</e2> can be gained via an interconnecting doorset from the garage, then either the garage doorset (pedestrian and vehicular) or the interconnecting doorset should be a secure doorset.",part-of,annotated
+a0c838b5-5fe2-4b52-abe1-432804c2c8aa_5,,,A <e1>water temperature</e1> of 21 C shall be used as the <e2>extends</e2> for room temperature during the heating season.,equal,synthetic
+536b172d-ccd1-479a-8136-6ee05db0f264_9,,,"Where pipework is above ground, the performance of the pipe <e1>flight</e1> should be at least as high as the <e2>air extract rate</e2> of pipework in the buried part of the system.",greater-equal,synthetic
+5577528f-8fa0-4ca3-96f6-ea418091cb86,The side edges of stairs and landings must be fitted with a raised camber to prevent slipping over the edge if a cube measuring more than 50 millimetres in width is able to pass through the opening between the plane level and the handrail or wall.,{'ID': '32_Finnish_SafetyOfUse'},The <e1>side edges</e1> of stairs and landings must be <e2>fitted with a raised camber to prevent slipping over the edge</e2> if a cube measuring more than 50 millimetres in width is able to pass through the opening between the plane level and the handrail or wall.,necessity,annotated
+34a524ec-6994-426f-86af-78788fd34a80_1,,,"Between the locking points for the mortice lock and surface-mounted rim lock, the <e1>Leakage</e1> should be <e2>120</e2>.",equal,synthetic
+bb3ac5b0-14d0-4d75-95d9-713adc6f2f58,"Any walls, doors and windows should be insulated and draught-proofed to at least the same extent as in the existing dwelling.",{'ID': '433_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Any <e1>walls</e1>, doors and windows should be insulated and draught-proofed to <e2>at least the same extent as in the existing dwelling</e2>.",none,annotated
+85745724-aa09-4cdd-ad17-3c50ea2b99a1,"Where sanitary facilities are wheelchair accessible, basins and sinks should be wall hung (typically with their rim 770-850mm above finished floor level) and the clear zone beneath basins, services and pedestals is maximised to enable wheelchair users to approach.",{'ID': '105_UK_DocM_V1_AccessAndUseOfBuildings'},"Where sanitary facilities are wheelchair accessible, basins and <e1>sinks</e1> should be <e2>wall hung (typically with their rim 770-850mm above finished floor level)</e2> and the clear zone beneath basins, services and pedestals is maximised to enable wheelchair users to approach.",necessity,annotated
+4a82f789-a98a-4379-9b81-2a20cfba6c87_9,,,"If the internal ties must be centred on the supporting line, the minimum value of the <e1>standard thickness</e1>, <e2>0.136kgCO2/kWh</e2>, will also be applied to internal ties.",greater-equal,synthetic
+a9cea98b-d439-4930-a991-fc17eee6657c,the location of the electric vehicle charge point or future connection location should be suitable for use by electric vehicles with charging inlets in different places.,{'ID': '102_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},the location of the electric vehicle charge point or future connection <e1>location</e1> should be <e2>suitable for use by electric vehicles with charging inlets in different places</e2>.,necessity,annotated
+1ebce0c9-705c-47ee-8429-e83cfbed72db,"All walls, ducts and boxings to every WC/cloakroom, bath and shower room are strong enough to support grab rails, seats and other adaptations that could impose a load of 1.5kN/m2.",{'ID': '103_UK_DocM_V1_AccessAndUseOfBuildings'},"All walls, ducts and <e1>boxings</e1> to every WC/cloakroom, <e2>bath</e2> and shower room are strong enough to support grab rails, seats and other adaptations that could impose a load of 1.5kN/m2.",part-of,annotated
+6414854d-01f9-481f-a7f4-c4581e48d8b1_11,,,Special safety features are not necessary if the <e1>induction loop</e1> is not more than <e2>one</e2> long.,less-equal,synthetic
+7f696221-52c9-4c52-8f90-74bd93c51299_5,,,This grippable handrail is 850-1000mm above the pitch line of the flight and <e1>emission rate</e1> at least <e2>900mm</e2> beyond the top and bottom nosings.,greater-equal,synthetic
+23cff3c3-1251-4c5f-9fd9-8f52d25eb494_11,,,Gasfired boilers and multi-stage oilfired boilers with an <e1>locations</e1> of more than <e2>5m</e2> should have fully modulating burner controls.,greater,synthetic
+922bf8df-3a70-4f45-8c04-200b638d3b3c_8,,,The cold water pipe shall be designed and installed so that the <e1>safety features</e1> in the cold water system may not exceed <e2>40</e2>.,less-equal,synthetic
+6c789809-b1b8-429a-8fe2-8ce16f8a4b54_1,,,Air flows in the continuous working area of a parking garage for motor vehicles shall be designed so that the <e1>standards</e1> does not exceed <e2>3</e2>.,less-equal,synthetic
+302c413e-fefd-47f1-914f-0dc787e4a761_9,,,"Where <e1>heat emission capacity</e1> on surfaces is greater than <e2>24 metres</e2>, a difference in light reflectance value should be a minimum of 20 points.",greater,synthetic
+8364a5f1-f80e-484c-9f38-bffc6f4c1876,"Where communal parking is provided to blocks of flats, at least one standard parking bay is provided close to the communal entrance of each core of the block (or to the lift core where the parking bay is internal).",{'ID': '44_UK_DocM_V1_AccessAndUseOfBuildings'},"Where <e1>communal</e1> <e2>parking</e2> is provided to blocks of flats, at least one standard parking bay is provided close to the communal entrance of each core of the block (or to the lift core where the parking bay is internal).",selection,annotated
+d3fc8c9b-c23a-4188-8723-369caa90453c,"The reference value for a building's total combined window area is 15 of the sum total of the floor  plate areas  of  the  buildings  storeys that  are  fully  or in  part  above  the  ground  but, however, at most 50 of the building's facade area.",{'ID': '124_Finnish_EnergyEfficiency'},"The reference value for a building's total combined window area is 15 of the sum total of the floor plate areas of the buildings <e1>storeys</e1> that are <e2>fully or in part above the ground</e2> but, however, at most 50 of the building's facade area.",selection,annotated
+500fc416-e652-4a2c-8dd3-8d9754ea1829,There should be no visible mould on the inner surfaces of external walls of a properly heated building with typical moisture generation.,{'ID': '115_UK_DocF_V2_Ventilation'},There should be no visible <e1>mould</e1> on the inner surfaces of external walls of a properly heated building <e2>with typical moisture generation</e2>.,none,annotated
+fb5d3054-4911-4049-ba09-1c3e80f9c07c,"The tread of steps in uncovered or unheated outdoor staircases must be no less than 390 millimetres, and the riser may be no more than 130 millimetres.",{'ID': '29_Finnish_SafetyOfUse'},"The <e1>tread</e1> of steps in uncovered or unheated outdoor staircases must be no less than <e2>390 millimetres</e2>, and the riser may be no more than 130 millimetres.",greater-equal,annotated
+05fdde92-d8af-42ad-963b-9019c69a8ab3_11,,,"For a timber frame where the intermediate floor structure breaches the external wall insulation, further insulation of the same <e1>number of occupants</e1> as the <e2>structural elements</e2> used in the external wall should be included within the depth of the intermediate floor structure.",equal,synthetic
+7e369e4c-7768-4a7a-bd9c-41e2aa037b43,The air flows shall be designed so that the average carbon monoxide concentration in a parking garage for motor vehicles during the hour of use assessed as the most critical does not exceed 35 mg/m3 (30 ppm).,{'ID': '61_Finnish_Health-IndoorClimateAndVentilation'},The air flows shall be designed so that the <e1>average carbon monoxide concentration</e1> in a <e2>parking garage</e2> for motor vehicles during the hour of use assessed as the most critical does not exceed 35 mg/m3 (30 ppm).,part-of,annotated
+5fa7daca-cb50-4397-a736-617e52d30187_2,,,"If efficiencies at below 30% are required and unavailable, the <e1>total minimum width</e1> may be taken as equal to that at <e2>400-600mm</e2>.",equal,synthetic
+6d9a1e8e-6fe7-4234-951a-96fdc4598bd7_2,,,"If parking spaces are provided for a building, an adequate number of <e1>building</e1>, but at least <e2>90</e2>, shall be intended for the use of a person with mobility and functional impairment.",greater-equal,synthetic
+15c28729-22a9-4992-b43a-bdcf457c0526,"Both before and after a newly constructed building is built, a notice must be given to the building control body of the calculations.",{'ID': '45_UK_DocM_V2_AccessAndUseOfBuildings'},"Both before and after a newly constructed building is built, a notice must be given to the <e1>building control body</e1> <e2>of the calculations</e2>.",selection,annotated
+19478a13-7457-4dd3-a394-744f826db7b0_8,,,"The handle to at least <e1>A</e1> <e2>Areas</e2> in the principal living area is 700-1000mm above floor level, unless fitted with a remote opening device that is within this height range.",greater-equal,synthetic
+37239af2-8f49-499f-ab25-73f92d7c9369,Each letter should be 25mm high.,{'ID': '117_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},<e1>Each</e1> <e2>letter</e2> should be 25mm high.,selection,annotated
+28c47652-47a0-4fa4-8343-beee0af2691c,"Large  roof  surfaces  must  be  divided  into  parts  of  no  more  than  2,400 square  metres.",{'ID': '181_Finnish_FireSafety'},"Large <e1>roof</e1> <e2>surfaces</e2> must be divided into parts of no more than 2,400 square metres.",part-of,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_4,,,"If the air flows of <e1>measures</e1> <e2>30% load</e2> and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+0cafda73-ee3a-4a99-a224-2d142de63618,"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",{'ID': '238_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a wet <e1>heating system</e1> is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated <e2>pipework</e2> all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",selection,annotated
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3_11,,,"Where the <e1>air flow resistance</e1> of installing only cable routes is more than <e2>0.3W/m2</e2> of the total cost of the major renovation, there is no requirement to install either electric vehicle charge points or cable routes.",greater,synthetic
+a235c68f-ae44-4770-b005-4e9d7b659eb7_2,,,All cavity walls should have leaves at least <e1>180kW</e1> <e2>constraints</e2> and cavities at least 50mm wide.,greater-equal,synthetic
+0096a3bf-ac16-4a75-adf9-8c3f4a9b8610_9,,,The smaller <e1>U-values</e1> of each panel which can be either the width or height of the panel should be <e2>650mm</e2> or less.,less-equal,synthetic
+c384013b-c40f-4925-acbe-465e1ca5bc13,One photograph per detail should be recorded.,{'ID': '480_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>One</e1> <e2>photograph</e2> per detail should be recorded.,equal,annotated
+72e7ed0c-9e73-46b2-a919-20f3fea337fd,"An area with a potentially flammable or explosive atmosphere must not be located in a building where there are dwellings, accommodation premises, institutions or assembly and business premises.",{'ID': '56_Finnish_FireSafety'},"An area with a potentially flammable or explosive atmosphere must not be located in a building where there are dwellings, <e1>accommodation premises</e1>, <e2>institutions</e2> or assembly and business premises.",none,annotated
+76bf63bd-30f4-440d-81a0-61ca16170f70_3,,,Control should be maximised and heat gain to uninsulated pipes should only be permitted where the <e1>results</e1> is less than <e2>20 millimetres</e2> of the total load.,less,synthetic
+3153d771-404e-4a54-ac05-ed1b75e37506_0,,,"Gangways should not be less than 1100mm <e1>floor area</e1> unless used by not more than 50 persons, in which case gangways should be a minimum of <e2>50mm</e2>.",greater-equal,synthetic
+bb9ec292-062b-43c3-8590-856dd5f6b890_3,,,"The building primary energy rate and <e1>termination points</e1> calculated using the measured air permeability must not be higher than the target primary energy rate and <e2>level with entry</e2>, respectively.",less-equal,synthetic
+df09194e-2fe6-4007-b6c1-1a7383f1baba,"Generally, gradients within the approach should be as gentle as possible.",{'ID': '40_UK_DocM_V2_AccessAndUseOfBuildings'},"Generally, <e1>gradients</e1> <e2>within the approach</e2> should be as gentle as possible.",selection,annotated
+f505cec8-d1a6-41ae-b2ba-68ac19f64be2,"If other performance (e.g. wind load, safety, security or acoustic attenuation) requires thicker glass to be used, an equivalent window unit with standard thickness glazing should be shown to meet the required standard.",{'ID': '137_UK_DocM_V2_AccessAndUseOfBuildings'},"If other <e1>performance</e1> (e.g. wind load, safety, security or acoustic attenuation) <e2>requires thicker glass</e2> to be used, an equivalent window unit with standard thickness glazing should be shown to meet the required standard.",selection,annotated
+e505b13c-7b62-4857-aa2d-544dc986e9c0_4,,,"For dwellings, for external tapered steps and stairs that are part of the building the <e1>thermal integrity</e1> of each step should be a minimum of <e2>14 metres</e2>.",greater-equal,synthetic
+b5aa20f2-571e-48d8-9943-4102c9f9bd1a,"In exit passageways and fire-compartmented elevator shafts, means must be arranged for both smoke extraction and flow of replacement air.",{'ID': '250_Finnish_FireSafety'},"In exit passageways and fire-compartmented <e1>elevator shafts</e1>, <e2>means</e2> must be arranged for both smoke extraction and flow of replacement air.",necessity,annotated
+984c252b-74f4-4d85-9080-1c8ae1851eca,"If performance requires thicker glass to be used, an equivalent window unit with standard thickness (6mm) glazing should be shown to meet the required standard.",{'ID': '113_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If performance requires thicker glass to be used, an equivalent window unit with standard thickness (<e1>6mm</e1>) glazing should be <e2>shown to meet the required standard</e2>.",none,annotated
+d0f0d416-a728-4d23-965e-10ff6559f2d8,All users including wheelchair users should be able to reach and use the controls that summon and direct the lifting platform.,{'ID': '113_UK_DocM_V2_AccessAndUseOfBuildings'},All <e1>users</e1> including <e2>wheelchair users</e2> should be able to reach and use the controls that summon and direct the lifting platform.,part-of,annotated
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_0,,,"In buildings more than 9 metres and at most 28 metres in height, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than <e1>90mm</e1> in <e2>patterns</e2>, these must be accessible via the interior.",greater,synthetic
+9b594ead-759a-420d-8d1c-52f007daaca4,"Each office should have the means to provide purge ventilation, to reduce pollutants before the office space is occupied or after activities such as painting.",{'ID': '56_UK_DocF_V2_Ventilation'},"Each <e1>office</e1> should have the <e2>means</e2> to provide purge ventilation, to reduce pollutants before the office space is occupied or after activities such as painting.",necessity,annotated
+0aaf71f0-a482-4a72-a407-0d6db79c7f6f,"In a building consisting primarily of one storey, no more than 200 m2 of fire-compartmented and no more than 50 m2 of non-fire-compartmented areas that essentially relate to the business of the building may be located on the level of second storey.",{'ID': '69_Finnish_FireSafety'},"In a building consisting primarily of one storey, no more than 200 m2 of fire-compartmented and no more than 50 m2 of <e1>non-fire-compartmented</e1> <e2>areas</e2> that essentially relate to the business of the building may be located on the level of second storey.",selection,annotated
+ed2cca4a-50f7-470d-9752-dd8722385a24,"In dwellings and other premises that are used by children, restrictors must be installed on windows and other openings where there may be a danger of falling, and these must be such that they limit the easy opening of the window to 100 millimetres.",{'ID': '80_Finnish_SafetyOfUse'},"In <e1>dwellings</e1> and other premises that are used by children, restrictors must be installed on windows and other <e2>openings</e2> where there may be a danger of falling, and these must be such that they limit the easy opening of the window to 100 millimetres.",part-of,annotated
+ff3e8f86-1542-4f54-a776-cfdc8482bad7_3,,,The <e1>level differences</e1> of an air conditioner working in cooling mode should be a minimum of <e2>55</e2>.,greater-equal,synthetic
+f9de28ac-45bb-4400-9d9f-8afee73bd2e3_8,,,The <e1>design solar load</e1> should not exceed <e2>two</e2> of dwelling floor area.,less-equal,synthetic
+d178dd92-6cf3-4f68-a9ba-44b97d74204a,"Staircases must be safe, sufficiently spacious and suitable for their purpose.",{'ID': '13_Finnish_SafetyOfUse'},"<e1>Staircases</e1> must be <e2>safe</e2>, sufficiently spacious and suitable for their purpose.",necessity,annotated
+8aa4b706-1659-4e30-a4fe-e7f33efe3241_6,,,All <e1>A</e1> <e2>restrictors</e2> of the compliance checklist should be completed.,equal,synthetic
+34a524ec-6994-426f-86af-78788fd34a80_4,,,"Between the locking points for the mortice lock and surface-mounted rim lock, the <e1>size</e1> should be <e2>230mm</e2>.",equal,synthetic
+13a437c0-918c-47f2-85bd-b80dd69eb027_6,,,"There are no <e1>air extract rate</e1> on the <e2>Extract</e2> of display windows and similar glazing, but for new buildings their impact must be taken into account in the calculation of primary energy and CO2 emissions.",not-part-of,synthetic
+0638f810-16d0-4670-8870-4e7c78c5371f,Insulated cavity closers should be installed where appropriate.,{'ID': '419_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Insulated</e1> <e2>cavity closers</e2> should be installed where appropriate.,selection,annotated
+e874f337-2067-4e77-ad32-c3b857f40e7a,"If the number of occupants exceeds 120, the total minimum width of the exits shall be calculated by increasing the original 1,200 millimetres by 400 millimetres for each additional group of 60 people.",{'ID': '219_Finnish_FireSafety'},"If the number of occupants exceeds 120, the <e1>total minimum width</e1> of the exits shall be <e2>calculated by increasing the original 1,200 millimetres by 400 millimetres for each additional group of 60 people</e2>.",necessity,annotated
+d713514a-9398-45a2-9584-efecff6ebcc5,Reasonable provision must be made to resist unauthorised access to (a) any dwelling; and (b) any part of a building from which access can be gained to a flat within the building.,{'ID': '4_UK_DocQ_Security_Dwellings'},Reasonable provision must be made to <e1>resist unauthorised access</e1> to (a) any <e2>dwelling</e2>; and (b) any part of a building from which access can be gained to a flat within the building.,necessity,annotated
+079db365-cfed-474e-9329-25349ac0db4a,"In connection with the door of an outside space of an individual dwelling the level difference outside the door may be more than 20 millimetres if the level difference can, with reasonable effort, be eliminated with equipment in the outdoor space.",{'ID': '21_Finnish_Accessibility'},"In connection with the door of an outside space of an individual dwelling the <e1>level difference</e1> <e2>outside the door</e2> may be more than 20 millimetres if the level difference can, with reasonable effort, be eliminated with equipment in the outdoor space.",selection,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479_9,,,Individual flights are: for gradients up to 1:15 not more than <e1>6mm</e1> <e2>standard thickness</e2>; for gradients up to 1:12 not more than 5m long.,less-equal,synthetic
+20518e80-6f7e-457f-8c5a-59fa4c0eb324_3,,,"When calculating the heat loss for a buildings design solution, the <e1>deep</e1> shall be used as the value of the <e2>clear width</e2> for the building envelope.",equal,synthetic
+f5a71c7b-e852-40f2-8f88-91cda7902a7e,"If a new building has a space heating or airconditioning system with an effective rated output greater than 180kW, a building automation and control system should be installed.",{'ID': '319_UK_DocM_V2_AccessAndUseOfBuildings'},"If a new building has a space heating or airconditioning system with an <e1>effective rated output</e1> greater than <e2>180kW</e2>, a building automation and control system should be installed.",greater,annotated
+a387fcb8-ead2-4094-9be9-72d783468b33_10,,,"If the <e1>open outwards</e1> of windows, roof windows, rooflights and doors exceeds <e2>200 m2</e2> of the total floor area of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",greater,synthetic
+74002ed3-548e-4e2f-8835-be76e643c67d_11,,,NOTE 2: Double doors effectively provide nibs where each leaf is at least <e1>20 millimetres</e1> <e2>locations</e2>.,greater-equal,synthetic
+50e89a86-e2be-439d-b230-79274cd7199b,Modular and portable buildings with a planned service life of more than two years at a single location should be shown to comply with the energy efficiency requirements.,{'ID': '81_UK_DocM_V2_AccessAndUseOfBuildings'},Modular and <e1>portable</e1> buildings with a planned service life of more than <e2>two years</e2> at a single location should be shown to comply with the energy efficiency requirements.,none,annotated
+656aa2fa-18cb-41ee-ae28-28deb3dffcc3,The water temperature of the water in the hot water system shall be at least 55 degrees Celsius and available from the hot water plumbing fixture within 20 seconds.,{'ID': '61_Finnish_Health-WaterAndSewerage'},The <e1>water temperature</e1> of the water in the hot water system shall be at least <e2>55 degrees Celsius</e2> and available from the hot water plumbing fixture within 20 seconds.,greater-equal,annotated
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_4,,,Skirtings totalling up to <e1>65mm</e1> <e2>inner surfaces</e2> and shallow projecting ducts or casings above 1800mm may be discounted when measuring clear width.,less-equal,synthetic
+a2f3a871-91d5-4777-95c9-4744792b3a69,"in an existing building, for the principal or main staff entrance or entrances to be accessible, an alternative accessible entrance should be provided.",{'ID': '61_UK_DocM_V2_AccessAndUseOfBuildings'},"in an existing <e1>building</e1>, for the principal or main staff <e2>entrance</e2> or entrances to be accessible, an alternative accessible entrance should be provided.",part-of,annotated
+113b8bf8-1856-45f5-a54b-d65ef100b437_2,,,"If a gas-fired combination boiler is installed in an existing dwelling, at least <e1>7 mg/m3 (6 ppm)</e1> of the following <e2>manufacturers declared efficiencies</e2>, appropriate to the system, should be installed.",greater-equal,synthetic
+aec8a3e1-5ba0-4288-ab0a-e47b0310ff6a,Capacities should be derived from the combined total of a buildings publicly accessible facilities.,{'ID': '162_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Capacities</e1> should be <e2>derived from the combined total of a buildings publicly accessible facilities</e2>.,necessity,annotated
+0da52584-1b37-48b5-840f-3795ae695275,the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where two doors are located at 90��° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,{'ID': '119_UK_DocM_V2_AccessAndUseOfBuildings'},the minimum clear dimensions of the platform are: 1100mm wide and <e1>1400mm</e1> <e2>deep</e2> where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,annotated
+ec2e84a5-89bc-4c16-9a55-1965efd13981,"Wall insulation should be installed to the top of the wall plate; in some places, such as the eaves, this may be above the cavity closure or barrier.",{'ID': '167_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Wall insulation should be installed to the top of the wall plate; in some places, such as the eaves, <e1>this</e1> may be <e2>above the cavity closure or barrier</e2>.",necessity,annotated
+5fa7daca-cb50-4397-a736-617e52d30187_5,,,"If <e1>feasibility of installing high-efficiency alternative systems</e1> at below 30% are required and unavailable, the <e2>air leakage rate figure</e2> may be taken as equal to that at 30% load.",equal,synthetic
+5fa7daca-cb50-4397-a736-617e52d30187_1,,,"If <e1>outputs</e1> at below 30% are required and unavailable, the <e2>that</e2> may be taken as equal to that at 30% load.",equal,synthetic
+b810df40-4dd8-44c4-80c4-b33bb873a5e9,"If  the  circulation  piping  is  located  inside  the  building envelopes insulation, 25 of the calculated domestic hot water circulation heat loss shall be added  to  the  thermal  load  of  the  spaces  of  the  building.",{'ID': '103_Finnish_EnergyEfficiency'},"If the <e1>circulation piping</e1> is <e2>located inside the building envelopes insulation</e2>, 25 of the calculated domestic hot water circulation heat loss shall be added to the thermal load of the spaces of the building.",selection,annotated
+19478a13-7457-4dd3-a394-744f826db7b0_2,,,"The handle to at least <e1>1.501kWhPE/kWh</e1> <e2>building owner</e2> in the principal living area is 700-1000mm above floor level, unless fitted with a remote opening device that is within this height range.",greater-equal,synthetic
+7f3f59a4-fc7e-4b14-8074-384f6cacf548_0,,,"The <e1>storage capacity</e1> of a barrier in a dwellings indoor areas may, however, be at least <e2>20C</e2> if the drop is less than three metres.",greater-equal,synthetic
+3724fd47-22f7-432c-81a2-1abcb95c7df2,"The total number of ventilators installed in a dwellings habitable rooms and kitchens should be no fewer than five, except in one bedroom properties, where there should be no fewer than four.",{'ID': '96_UK_DocF_V1_Ventilation'},"The <e1>total number of ventilators</e1> installed in a dwellings <e2>habitable rooms</e2> and kitchens should be no fewer than five, except in one bedroom properties, where there should be no fewer than four.",part-of,annotated
+3121fe90-27db-405e-a42a-df3cd22ee176_11,,,"Where necessary, <e1>60</e1><e2>cube</e2>, one above the other, must be installed in order to take into account children and users of wheelchairs.",equal,synthetic
+aaca648c-5f60-4300-a30f-887da252ebd0,The use of visually and acoustically reflective wall surfaces should be minimised within the lifting platform to prevent discomfort for people with visual and hearing impairment.,{'ID': '116_UK_DocM_V2_AccessAndUseOfBuildings'},The use of visually and <e1>acoustically reflective</e1> <e2>wall surfaces</e2> should be minimised within the lifting platform to prevent discomfort for people with visual and hearing impairment.,selection,annotated
+984c252b-74f4-4d85-9080-1c8ae1851eca_8,,,"If performance requires thicker glass to be used, an equivalent window unit with <e1>domestic  hot  water cylinder heat loss</e1> (<e2>half a metre</e2>) glazing should be shown to meet the required standard.",equal,synthetic
+5fa7daca-cb50-4397-a736-617e52d30187_0,,,"If efficiencies at below 30% are required and unavailable, the <e1>heat loss</e1> may be taken as equal to that at <e2>15</e2>.",equal,synthetic
+f72a98f3-b7d2-4633-b244-0d7242dfb0c9_7,,,Every single bedroom has a minimum <e1>axle group load</e1> of <e2>220 millimetres</e2> and is at least 2.4m wide.,greater-equal,synthetic
+4470dde4-6422-4c13-9781-de68c3e075dc_7,,,"The outdoor <e1>rate of heat release</e1> of a dwelling unit, however, shall be designed to be a minimum of <e2>55 degrees Celsius</e2>.",greater-equal,synthetic
+f0c72b35-5a0a-4554-8713-96f6f73a67f1_7,,,A cube with <e1>relationship</e1> of no more than <e2>01:08:00</e2> may pass between the lower edge of a barriers protective part and the landing or the upper surface or edge of a step.,less-equal,synthetic
+05fdde92-d8af-42ad-963b-9019c69a8ab3_6,,,"For a timber frame where the intermediate floor structure breaches the external wall insulation, further insulation of the same <e1>exit</e1> as the <e2>Refreshment facilities</e2> used in the external wall should be included within the depth of the intermediate floor structure.",equal,synthetic
+26980508-105c-49db-8595-bf001a48d757_1,,,"In <e1>fan</e1> with no fixed seats or <e2>sign</e2>, the number of persons shall be calculated to be two persons per square metre.",not-part-of,synthetic
+a4dc06ab-99c3-4c8b-b295-eb3e6a64320a,"The free height from the ground or from the surface of a driveway or walkway of the lower edge of a structural element, device or equipment protruding from the building, such as a balcony, bay window, sign, lighting device or awning, must be at least 2.2 metres, unless the area is protected so as to prevent the danger of collision.",{'ID': '99_Finnish_SafetyOfUse'},"The free <e1>height</e1> from the ground or from the surface of a driveway or walkway of the lower edge of a structural element, device or equipment protruding from the building, such as a balcony, bay window, sign, lighting device or awning, must be at least <e2>2.2 metres</e2>, unless the area is protected so as to prevent the danger of collision.",greater-equal,annotated
+fb5d3054-4911-4049-ba09-1c3e80f9c07c_6,,,"The <e1>number of appliances</e1> of steps in uncovered or unheated outdoor staircases must be no less than <e2>500 millimetres</e2>, and the riser may be no more than 130 millimetres.",greater-equal,synthetic
+dcc583b1-8c4c-42cf-a1ed-e8907de56254_0,,,"The rise of the indoor steps of other spaces intended for everyday use may be no more than 180 millimetres, and the <e1>size</e1> must be no less than <e2>65 degrees Celsius</e2>.",greater-equal,synthetic
+7f49ccb1-ce2c-47eb-8b22-2c8e806e5d88_7,,,The resilient layer should be to the full height of the door and <e1>200 m2</e1> <e2>Activation</e2> of the doorset.,equal,synthetic
+755b768a-b9d0-4175-8b69-398c399aeac7,It should be possible for information about the building to be easily obtained from a reception point or gathered from notice boards and signs.,{'ID': '86_UK_DocM_V2_AccessAndUseOfBuildings'},It should be possible for <e1>information</e1> <e2>about the building</e2> to be easily obtained from a reception point or gathered from notice boards and signs.,selection,annotated
+7c44934c-61e1-4904-a493-1aa360ccc7d1,"The building shall be constructed so that the combined dead,imposed and wind loads are sustained and transmitted by it to the ground: (a) safely; and (b) without causing such deflection or deformation of any part of the building, or such movement of the ground, as will impair the stability of any part of another building.",{'ID': '1_UK_DocA_Structure'},"The building shall be constructed so that the <e1>combined dead,imposed and wind loads</e1> are sustained and <e2>transmitted by it to the ground</e2>: (a) safely; and (b) without causing such deflection or deformation of any part of the building, or such movement of the ground, as will impair the stability of any part of another building.",selection,annotated
+2afa8bba-b5ad-4e12-bc27-4beea3fd09b2_2,,,The normal relationship between the <e1>number of storeys</e1> of the rise and going is: <e2>9mm</e2> equals between 550mm and 700mm.,equal,synthetic
+d728a9c8-0302-4bd1-b69b-0daeefce30d1,"Where a service building has a reception or sales counter, there should be convenient access to it and part of it should be at a level suitable for a wheelchair user or a seated person.",{'ID': '84_UK_DocM_V2_AccessAndUseOfBuildings'},"Where a service building has a reception or sales counter, there should be <e1>convenient</e1> <e2>access</e2> to it and part of it should be at a level suitable for a wheelchair user or a seated person.",selection,annotated
+710ef992-e187-4b1a-894b-e0e222f54359_4,,,"NOTE: For grid-supplied electricity, a <e1>surface temperature</e1> of <e2>20</e2> and primary energy factor of 1.501kWhPE/kWh should be used.",equal,synthetic
+43e26628-8b62-4cc6-91e2-284335df1564_10,,,"In rooms used for sleeping or rest, the <e1>fire igniting</e1> may not exceed <e2>20</e2>.",less-equal,synthetic
+75c60084-6878-472d-8694-e8739e0dd76c_2,,,The width of access routes in assembly areas with a <e1>travel</e1> of <e2>3</e2> must be at least 900 millimetres.,equal,synthetic
+4fc3b5b1-a838-4429-b385-d8e80e6633eb,"In the absence of relevant harmonised European Standards, products with a travel exceeding 3m must have a product certificate issued by a Notified Body.",{'ID': '117_UK_DocM_V2_AccessAndUseOfBuildings'},"In the <e1>absence</e1> of relevant harmonised European Standards, <e2>products</e2> with a travel exceeding 3m must have a product certificate issued by a Notified Body.",selection,annotated
+33eb3a5a-584f-4d1e-84a0-35fe66954d80,Consideration should be given to the power requirements of essential (e.g. life safety) systems.,{'ID': '323_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Consideration</e1> should be given to the <e2>power requirements</e2> of essential (e.g. life safety) systems.,necessity,annotated
+d3e7a947-536e-4a49-9823-e27fc0f68b27,Length of landings to be at least equal to the width of the ramp.,{'ID': '66_UK_DocK_ProtectionFromFalling'},<e1>Length</e1> of <e2>landings</e2> to be at least equal to the width of the ramp.,part-of,annotated
+db734798-9e42-4fe1-900c-77d4e6131809,"The main doors for entering a dwelling (usually the front door) should have a door viewer unless other means exist to see callers, such as clear glass within the door or a window next to the doorset.",{'ID': '11_UK_DocQ_Security_Dwellings'},"The main doors for entering a dwelling (usually the front door) should have a door viewer unless other <e1>means</e1> exist to see callers, such as clear glass within the door or a <e2>window</e2> next to the doorset.",selection,annotated
+5b1fe636-d2aa-4382-885e-a4f8a2cae4d4_2,,,"Generally, a thermal element once upgraded should not have a <e1>locations</e1> greater than <e2>0.15m/s</e2>.",less-equal,synthetic
+642e2c46-45a8-440f-af0b-1b53f41d8d8f,Taps and WC cubicle doors should be operable by people with limited strength or manual dexterity and doors to cubicles should be capable of being opened if a person has collapsed against them while inside the cubicle.,{'ID': '156_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Taps</e1> and WC cubicle doors should be <e2>operable by people with limited strength or manual dexterity</e2> and doors to cubicles should be capable of being opened if a person has collapsed against them while inside the cubicle.,necessity,annotated
+113b8bf8-1856-45f5-a54b-d65ef100b437_0,,,"If a gas-fired combination boiler is installed in an existing dwelling, at least <e1>two years</e1> of the following <e2>prevailing wind direction</e2>, appropriate to the system, should be installed.",greater-equal,synthetic
+10e66a84-25db-40a0-87d5-6297d0732fe4,The shutoff valves shall be located: 1) at each house; 2) at each apartment; 3) in vertical service pipes; 4) on both sides of devices installed in the service pipes; 5) before a device or fixture that is connected to the connector pipe;  6) on both sides of the water meters.,{'ID': '93_Finnish_Health-WaterAndSewerage'},The <e1>shutoff valves</e1> shall be located: 1) at each house; 2) at each apartment; 3) in vertical service pipes; 4) on both sides of devices installed in the service pipes; 5) before a <e2>device</e2> or fixture that is connected to the connector pipe; 6) on both sides of the water meters.,necessity,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_3,,,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the <e1>automatic flow adjustment</e1> of these must be at least <e2>3.3m</e2>.",greater-equal,synthetic
+76acc6bd-50c0-4f3f-b015-42e171ec6ce7_1,,,<e1>390 millimetres</e1> <e2>baby changing facilities</e2> must be installed.,equal,synthetic
+a1f91cfd-21f8-49a4-8468-746f49f4848e_8,,,"For a building that contains more than <e1>60</e1> <e2>playgrounds</e2> for example a block of flats or a terrace of houses an average target primary energy rate, target emission rate and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",greater,synthetic
+33206aa7-1092-4ab9-9534-8e8e16e72d1b,The storm water system shall be cleansable via manholes and fittings.,{'ID': '165_Finnish_Health-WaterAndSewerage'},The <e1>storm water system</e1> shall be <e2>cleansable via manholes and fittings</e2>.,necessity,annotated
+9027959e-efc1-4d32-acbe-e0775d40f001,"The morticed bolts should have a minimum projection of 20mm, should be at least 100mm from the top and bottom corners of the door, and should avoid any door construction joints.",{'ID': '38_UK_DocQ_Security_Dwellings'},"The <e1>morticed bolts</e1> should have a minimum projection of 20mm, should be at least 100mm from the top and bottom corners of the door, and should <e2>avoid any door construction joints</e2>.",necessity,annotated
+10b2bf58-18df-46ee-a766-ed11eec6f42b,"Humus soil, organic substances decomposing or rotting from moisture or building waste must not be left under new buildings, in their crawl spaces and in their gravel backfills functioning as a drainage layer.",{'ID': '45_Finnish_Health-Humidity'},"Humus soil, <e1>organic substances</e1> <e2>decomposing or rotting from moisture</e2> or building waste must not be left under new buildings, in their crawl spaces and in their gravel backfills functioning as a drainage layer.",selection,annotated
+a68b404d-d10a-4e48-b25b-907261271e75,Voids between insulation at the top of the external wall and the cavity wall/timber frame insulation should be fully filled with insulation.,{'ID': '171_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Voids</e1> <e2>between insulation at the top of the external wall and the cavity wall/timber frame insulation</e2> should be fully filled with insulation.,selection,annotated
+33ed3038-99a6-4b2d-906a-a1db21f2d898,"For heating systems in new dwellings, or when a heat generator such as a boiler is replaced in an existing dwelling, each room should be provided with thermostatic room controls.",{'ID': '250_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For heating systems in new dwellings, or when a heat generator such as a boiler is replaced in an existing <e1>dwelling</e1>, each <e2>room</e2> should be provided with thermostatic room controls.",part-of,annotated
+8364a5f1-f80e-484c-9f38-bffc6f4c1876_3,,,"Where communal parking is provided to blocks of flats, at least <e1>0.3</e1> standard <e2>sign</e2> is provided close to the communal entrance of each core of the block (or to the lift core where the parking bay is internal).",greater-equal,synthetic
+aca1acce-65c1-4677-a979-ce2920457a55,The surface of stairs the must not be slippery.,{'ID': '14_Finnish_SafetyOfUse'},The <e1>surface</e1> of <e2>stairs</e2> the must not be slippery.,part-of,annotated
+c2e0629d-350b-45b8-9e9e-d58be1780f12_3,,,"If the <e1>bath</e1> has no <e2>they</e2>, it should be treated as having one bedroom when calculating the ventilation required for the purposes of meeting the ventilation standards.",not-part-of,synthetic
+99a53f17-48cb-4012-a47b-700761e0983b_7,,,Where a new building which is not a residential building or a mixed-use building has more than 10 parking spaces (a) <e1>1.2W/(m2K)</e1> of those <e2>Glazing</e2> must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,equal,synthetic
+46f5be2a-1514-420b-bc39-331fc6e0d2df,"The dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the target primary energy rate, target emission rate and target fabric energy efficiency rate, respectively.",{'ID': '356_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The <e1>dwelling primary energy rate</e1>, dwelling emission rate and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the <e2>target primary energy rate</e2>, target emission rate and target fabric energy efficiency rate, respectively.",less-equal,annotated
+df24d65a-425f-4ddd-b3aa-0ae34be4b0c1,Beading should be mechanically fixed and glued in position.,{'ID': '32_UK_DocQ_Security_Dwellings'},<e1>Beading</e1> should be <e2>mechanically fixed</e2> and glued in position.,necessity,annotated
+bdfc74e0-24b2-41e2-be4e-6cab13de421f,The test data should be certified by a notified body.,{'ID': '222_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>test data</e1> should be <e2>certified by a notified body</e2>.,necessity,annotated
+d342429e-d3fc-46e0-a195-527cfef1fd4b_7,,,"When an existing building with a total useful <e1>target fabric energy efficiency rate</e1> of over <e2>400 millimetres</e2> is being extended or the habitable area is being increased, consequential improvements should be installed.",greater,synthetic
+fc54cd23-e216-4f59-b1b6-35ec47a83a4a,Test data must be from a minimum of five in-situ measurements of the same module types and link details as used in the actual building.,{'ID': '351_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Test data</e1> must be from a minimum of five in-situ measurements of the same module types and <e2>link details as used in the actual building</e2>.,necessity,annotated
+0cafda73-ee3a-4a99-a224-2d142de63618,"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",{'ID': '238_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including <e1>pipework</e1> and emitters should be sized to allow the space heating system to operate effectively and in a manner that <e2>meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower</e2>.",none,annotated
+ef561e39-db90-462c-8dde-15fbeae954e5_6,,,A cube with <e1>U-values</e1> of no more than <e2>2.4m</e2> may pass between the upper edge of the barrier and the protective part.,less-equal,synthetic
+1d18f0c9-31e5-43ee-8f16-e4fa607c5cd9,"The same approved calculation tool must be used to calculate the target primary energy rate, the target emission rate, the building primary energy rate and the building emission rate.",{'ID': '51_UK_DocM_V2_AccessAndUseOfBuildings'},"The same approved calculation tool must be used to calculate the target primary energy rate, the <e1>target emission rate</e1>, the <e2>building primary energy rate</e2> and the building emission rate.",none,annotated
+d0b6759e-deec-451d-bd7a-ec65b96048be,"extract air of category 3 shall be conducted through individual ducts, or common ducts serving spaces of the same type as regards level of air purity, to the outdoors, into a collection duct installed above the spaces it serves or into an extract air chamber.",{'ID': '130_Finnish_Health-IndoorClimateAndVentilation'},"<e1>extract air</e1> of category 3 shall be <e2>conducted through individual ducts, or common ducts serving spaces of the same type as regards level of air purity, to the outdoors, into a collection duct installed above the spaces it serves or into an extract air chamber</e2>.",necessity,annotated
+5ba5ffe7-ece8-488a-b461-da66237e7888,"All walls, ducts and boxings to the WC/cloakroom, bathroom and shower room should be strong enough to support grab rails, seats and other adaptations that could impose a load of up to 1.5kN/m2.",{'ID': '54_UK_DocM_V1_AccessAndUseOfBuildings'},"All walls, ducts and boxings to the <e1>WC/cloakroom</e1>, bathroom and <e2>shower room</e2> should be strong enough to support grab rails, seats and other adaptations that could impose a load of up to 1.5kN/m2.",none,annotated
+9f8c2fbb-a04e-42f9-8fa0-b7a905dbafa0,"The ventilation openings or slots leading to the ventilation space or gap of a structure equipped with a ventilation space or gap must be positioned so that the ventilation space or gap is fully usable as a ventilation air flow path and that the ventilation space or gap is free of enclosed, non-ventilated areas.",{'ID': '40_Finnish_Health-Humidity'},"The ventilation <e1>openings</e1> or slots leading to the ventilation space or gap of a structure equipped with a ventilation space or gap must be <e2>positioned</e2> so that the ventilation space or gap is fully usable as a ventilation air flow path and that the ventilation space or gap is free of enclosed, non-ventilated areas.",necessity,annotated
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_2,,,"The wall ties should have a horizontal spacing of 900mm and a <e1>level differences</e1> of <e2>5m</e2>, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",equal,synthetic
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the <e1>premises</e1> to be fitted with a floor drain shall be: 1. <e2>showers</e2> and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",necessity,annotated
+26980508-105c-49db-8595-bf001a48d757_3,,,"In <e1>cable duct</e1> with no fixed seats or <e2>schools</e2>, the number of persons shall be calculated to be two persons per square metre.",not-part-of,synthetic
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_10,,,"If the air flows of extract air categories 1 and 2 are combined into the same duct and <e1>impact</e1> <e2>0.055555556</e2> air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+d7b27bbb-ac51-4036-8073-d094cbe994db,"In cases where the Energy Related Products Regulations and the Building Regulations both apply, both standards should be met.",{'ID': '232_UK_DocM_V2_AccessAndUseOfBuildings'},"In cases where the Energy Related Products Regulations and the Building Regulations both apply, <e1>both</e1> <e2>standards</e2> should be met.",selection,annotated
+6c789809-b1b8-429a-8fe2-8ce16f8a4b54,Air flows in the continuous working area of a parking garage for motor vehicles shall be designed so that the instantaneous carbon monoxide concentration does not exceed 7 mg/m3 (6 ppm).,{'ID': '62_Finnish_Health-IndoorClimateAndVentilation'},Air flows in the continuous working area of a parking garage <e1>for motor vehicles</e1> shall be designed so that the instantaneous carbon monoxide concentration does not exceed <e2>7 mg/m3 (6 ppm)</e2>.,none,annotated
+dcc583b1-8c4c-42cf-a1ed-e8907de56254,"The rise of the indoor steps of other spaces intended for everyday use may be no more than 180 millimetres, and the tread must be no less than 270 millimetres.",{'ID': '23_Finnish_SafetyOfUse'},"The rise of the indoor steps of other spaces intended for everyday use may be no more than 180 millimetres, and the <e1>tread</e1> must be no less than <e2>270 millimetres</e2>.",greater-equal,annotated
+c0abe869-e87e-4e66-a8ca-8578a338b07a,"Where a building automation and control system is installed, its control capabilities should be appropriate for the building, its expected usage and the building services specification.",{'ID': '329_UK_DocM_V2_AccessAndUseOfBuildings'},"Where a <e1>building automation and control system</e1> is installed, its <e2>control capabilities</e2> should be appropriate for the building, its expected usage and the building services specification.",selection,annotated
+c06bb553-d8f1-47f5-ab33-cfdebb6bca52,"When a building undergoes a major renovation, the technical, environmental and economic feasibility of installing high-efficiency alternative systems should be considered.",{'ID': '117_UK_DocM_V2_AccessAndUseOfBuildings'},"When a building undergoes a major renovation, the technical, <e1>environmental</e1> and economic <e2>feasibility of installing high-efficiency alternative systems</e2> should be considered.",selection,annotated
+536b172d-ccd1-479a-8136-6ee05db0f264_10,,,"Where pipework is above ground, the performance of the pipe <e1>fasteners</e1> should be at least as high as the <e2>allowance</e2> of pipework in the buried part of the system.",greater-equal,synthetic
+d925c189-860a-4fcb-ae88-d1cf8cc14fb8_7,,,"The tread of steps in covered or heated outdoor staircases must be no less than 300 millimetres, and the <e1>intended purpose</e1> may be no more than <e2>15 degrees</e2>.",less-equal,synthetic
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_9,,,"The free opening of the vertical hatch or window of an emergency exit must be at least <e1>50 m2</e1> in <e2>sum</e2> and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",greater-equal,synthetic
+2f75848b-a39a-41d3-a6bf-25ef1154bcff,"Where appropriate, these should be automated (with manual override) so that energy savings are maximised.",{'ID': '322_UK_DocM_V2_AccessAndUseOfBuildings'},"Where appropriate, these should be automated (with manual override) so that <e1>energy savings</e1> are <e2>maximised</e2>.",selection,annotated
+cea6e7bd-c494-4146-9f81-3fd2ed64a2a6_9,,,The <e1>total combined window area</e1> of the floor surface in the seating area and access route may not exceed <e2>15mm</e2>.,less-equal,synthetic
+d34c0f60-8df0-4310-b5af-428c63225a6f,"After a period of non-use of at least eight hours, the water temperature may not exceed 24 degrees Celsius.",{'ID': '60_Finnish_Health-WaterAndSewerage'},"After a period of non-use of at least eight hours, the <e1>water</e1> <e2>temperature</e2> may not exceed 24 degrees Celsius.",part-of,annotated
+9f5fe460-cae1-4653-a951-38e31f3ed15d,"Any restrictors placed on windows used as emergency exits must, however, be easily releasable by an adult.",{'ID': '81_Finnish_SafetyOfUse'},"Any restrictors placed on <e1>windows</e1> <e2>used as emergency exits</e2> must, however, be easily releasable by an adult.",selection,annotated
+fc29901a-8b5e-48a5-a569-bed57699cf72,Moisture from the foundation wall and the base floors concrete slab must not transfer harmfully to the wooden sole plates or upper wall and floor structures.,{'ID': '89_Finnish_Health-Humidity'},<e1>Moisture</e1> from the foundation wall and the base floors concrete slab must <e2>not transfer harmfully to the wooden sole plates or upper wall and floor structures</e2>.,necessity,annotated
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c_0,,,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be <e1>heat loss</e1> <e2>ten millimetres</e2>.",equal,synthetic
+cccbc1ea-27be-4d7b-b53c-3cb467a51020,"For heating and cooling systems in a new non-domestic building, or when a heat generator such as a boiler is replaced in an existing non-domestic building, each room should be provided with thermostatic room controls.",{'ID': '220_UK_DocM_V2_AccessAndUseOfBuildings'},"For heating and cooling systems in a new non-domestic building, or when a heat generator such as a boiler is replaced in an existing <e1>non-domestic building</e1>, each <e2>room</e2> should be provided with thermostatic room controls.",part-of,annotated
+5869233a-4fc0-48bf-9007-2b0c9a169fef,"A building shall, if its size, number of storeys or an intended purpose of a premises within the building so requires, be divided into fire compartments in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",{'ID': '100_Finnish_FireSafety'},"A building shall, if its size, number of storeys or an intended purpose of a premises within the building so requires, be <e1>divided into fire compartments</e1> in order to <e2>restrict the spread of fire and smoke</e2>, to provide safe evacuation and to facilitate rescue and extinguishing measures.",selection,annotated
+5ed671ca-0cd0-47e2-ad68-1d910e5ddbdf,The access route in the seating area or standing auditorium must be directly accessible from the end of each row.,{'ID': '114_Finnish_SafetyOfUse'},The <e1>access route</e1> in the seating area or <e2>standing auditorium</e2> must be directly accessible from the end of each row.,part-of,annotated
+563cd5fb-adc9-4bde-8b34-4accc93ac84b,"Systems should not be significantly oversized in most circumstances, the cooling appliance should not be sized for more than 120 of the design cooling load.",{'ID': '331_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Systems should not be significantly oversized in most circumstances, the <e1>cooling appliance</e1> should <e2>not be sized for more than 120 of the design cooling load</e2>.",necessity,annotated
+63af9f99-6939-4e8c-a6a9-8b10942e1597_10,,,"The handle to at least <e1>2 metres</e1> <e2>commissioning plan</e2> in the principal living area is located between 450mm and 1200mm above floor level, unless the window is fitted with a remote opening device that is within this height range.",greater-equal,synthetic
+ef561e39-db90-462c-8dde-15fbeae954e5_5,,,A cube with <e1>steps</e1> of no more than <e2>180kW</e2> may pass between the upper edge of the barrier and the protective part.,less-equal,synthetic
+2af8ee5f-9d05-4023-9365-d093ebdfba1f,"Where building work is carried out in a kitchen or bathroom, any existing fans (including cooker hoods, where they extract to the outside) should be retained or replaced.",{'ID': '168_UK_DocF_V1_Ventilation'},"Where building work is carried out in a kitchen or <e1>bathroom</e1>, any existing <e2>fans (including cooker hoods, where they extract to the outside)</e2> should be retained or replaced.",none,annotated
+6b2f3ca5-8cea-4616-8679-438446bc6233,"Since doors are potential barriers, their use should be avoided whenever appropriate.",{'ID': '88_UK_DocM_V2_AccessAndUseOfBuildings'},"Since doors are potential barriers, <e1>their</e1> <e2>use</e2> should be avoided whenever appropriate.",part-of,annotated
+bf798097-bb99-42d0-a73f-8cebab8fbeb8_4,,,"In the entrance halls and other indoor areas of administrative, service and business premises and in assembly areas, the riser of the steps must be no more than 160 millimetres and the <e1>Extract</e1> must be no less than <e2>two persons per square metre</e2>.",greater-equal,synthetic
+ee0c8c7c-c65e-4403-92e6-628fd680f3bf_8,,,Any panel within the doorset should be at least <e1>1</e1> <e2>size</e2>.,greater-equal,synthetic
+b5aa20f2-571e-48d8-9943-4102c9f9bd1a,"In exit passageways and fire-compartmented elevator shafts, means must be arranged for both smoke extraction and flow of replacement air.",{'ID': '250_Finnish_FireSafety'},"In <e1>exit passageways</e1> and fire-compartmented elevator shafts, <e2>means</e2> must be arranged for both smoke extraction and flow of replacement air.",necessity,annotated
+2032e456-bf80-4342-90dc-0da164e00a9a,A unit that contains both living accommodation and space for commercial purposes (e.g. for a workshop or office) should be treated as a dwelling if the commercial part can be reverted to domestic use.,{'ID': '7_UK_DocF_V1_Ventilation'},A unit that contains both living accommodation and space for commercial purposes (e.g. for a workshop or office) should be treated as a dwelling if the <e1>commercial part</e1> can be <e2>reverted to domestic use</e2>.,selection,annotated
+b02f9b87-d934-4c2f-8a59-b3b8c0a7be17,"Instantaneous or snapshot CO2 readings can be misleading, so several measurements should be taken throughout the day.",{'ID': '124_UK_DocF_V2_Ventilation'},"Instantaneous or snapshot CO2 readings can be <e1>misleading</e1>, so several <e2>measurements</e2> should be taken throughout the day.",necessity,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_3,,,"If the air flows of <e1>SEER</e1> <e2>220 millimetres</e2> and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+88e23b46-22d9-4be6-87b7-40541f7995a9_9,,,"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the <e1>surface</e1> exceeds <e2>0.35W/(m2K)</e2>; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",greater,synthetic
+05864826-21ef-4ae7-9af8-2aaeffc7267a,Modular and portable buildings with a planned service life of more than two years but with an intended time of use in a single location of less than two years should be shown to comply with the energy efficiency requirements.,{'ID': '83_UK_DocM_V2_AccessAndUseOfBuildings'},Modular and portable <e1>buildings</e1> with a planned <e2>service life</e2> of more than two years but with an intended time of use in a single location of less than two years should be shown to comply with the energy efficiency requirements.,part-of,annotated
+d3fc8c9b-c23a-4188-8723-369caa90453c,"The reference value for a building's total combined window area is 15 of the sum total of the floor  plate areas  of  the  buildings  storeys that  are  fully  or in  part  above  the  ground  but, however, at most 50 of the building's facade area.",{'ID': '124_Finnish_EnergyEfficiency'},"The <e1>reference value</e1> for a building's total combined window area is <e2>15</e2> of the sum total of the floor plate areas of the buildings storeys that are fully or in part above the ground but, however, at most 50 of the building's facade area.",equal,annotated
+a5e9c36f-358f-4375-943c-6d5b89c82647,"Any abrupt level differences of over 0.7 metres and any precipices located in the vicinity of common play and recreation areas associated with buildings with more than two dwellings must be indicated by appropriate barriers or suitable planted areas, or outfitted with a base that cushions any fall.",{'ID': '92_Finnish_SafetyOfUse'},"Any abrupt level differences of over 0.7 metres and any precipices located in the vicinity of common play and recreation areas associated with buildings with more than <e1>two</e1> <e2>dwellings</e2> must be indicated by appropriate barriers or suitable planted areas, or outfitted with a base that cushions any fall.",greater,annotated
+793cb939-b3d9-46eb-ae65-71a4d5c8031b_11,,,Where the <e1>design solar load</e1> is within the private curtilage of the dwelling (but not within a carport or <e2>insulated plane</e2>) at least one space is a standard parking bay that can be widened to 3.3m.,not-part-of,synthetic
+10e66a84-25db-40a0-87d5-6297d0732fe4,The shutoff valves shall be located: 1) at each house; 2) at each apartment; 3) in vertical service pipes; 4) on both sides of devices installed in the service pipes; 5) before a device or fixture that is connected to the connector pipe;  6) on both sides of the water meters.,{'ID': '93_Finnish_Health-WaterAndSewerage'},The shutoff valves shall be located: 1) at each house; 2) at each apartment; 3) in <e1>vertical</e1> service pipes; 4) on both sides of devices installed in the <e2>service pipes</e2>; 5) before a device or fixture that is connected to the connector pipe; 6) on both sides of the water meters.,none,annotated
+5869233a-4fc0-48bf-9007-2b0c9a169fef,"A building shall, if its size, number of storeys or an intended purpose of a premises within the building so requires, be divided into fire compartments in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",{'ID': '100_Finnish_FireSafety'},"A building shall, if <e1>its</e1> size, <e2>number of storeys</e2> or an intended purpose of a premises within the building so requires, be divided into fire compartments in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",part-of,annotated
+a86b58e8-046f-44b7-8e1b-00c876c8c647,"Parapets in categories A to E and panel parts of walls acting as parapets, as well as their fasteners, shall be designed to the concentrated load Qk = 0.3 kN acting on a random spot.",{'ID': '30_Finnish_StabilityOfStructures'},"Parapets in <e1>categories</e1> A to E and <e2>panel parts</e2> of walls acting as parapets, as well as their fasteners, shall be designed to the concentrated load Qk = 0.3 kN acting on a random spot.",none,annotated
+642e2c46-45a8-440f-af0b-1b53f41d8d8f,Taps and WC cubicle doors should be operable by people with limited strength or manual dexterity and doors to cubicles should be capable of being opened if a person has collapsed against them while inside the cubicle.,{'ID': '156_UK_DocM_V2_AccessAndUseOfBuildings'},Taps and <e1>WC cubicle</e1> <e2>doors</e2> should be operable by people with limited strength or manual dexterity and doors to cubicles should be capable of being opened if a person has collapsed against them while inside the cubicle.,part-of,annotated
+81314489-dcd9-410f-9b15-595b87e7c8f9,"The resilient layer should be timber sheathing at least 9mm thick, expanded metal or a similar resilient material.",{'ID': '14_UK_DocQ_Security_Dwellings'},"The <e1>resilient layer</e1> should be timber sheathing at least 9mm thick, <e2>expanded metal</e2> or a similar resilient material.",necessity,annotated
+993e54cc-49c3-43cb-995e-1a951c93c775,"When a warning sign is not posted, the areas shall be designed to an axle load Qk and also to an axle group load equal to 190 kN.",{'ID': '25_Finnish_StabilityOfStructures'},"When a warning sign is not posted, the areas shall be designed to an axle load Qk and also to an <e1>axle group load</e1> equal to <e2>190 kN</e2>.",equal,annotated
+511c1a7f-08b9-48ec-aea6-9b749fdf31a1,"A non-residential building shall, considering the intended use and functional units of the building and distances in the building, have an adequate number of appropriately located toilet facilities which are suitable for users of wheelchairs and walking frames with wheels.",{'ID': '51_Finnish_Accessibility'},"A non-residential building shall, considering the intended use and functional units of the building and distances in the building, have an adequate number of <e1>appropriately located</e1> <e2>toilet facilities</e2> which are suitable for users of wheelchairs and walking frames with wheels.",selection,annotated
+103f99ad-884b-4bae-9f22-ccb1c5bc3d26,"In an open garage of no more than five storeys, the maximum area may be used as the surface area of the storeys, even though the driveways between the various storeys are combined.",{'ID': '110_Finnish_FireSafety'},"In an open garage of no more than five <e1>storeys</e1>, the maximum area may be used as the surface area of the storeys, even though the driveways between the various storeys are <e2>combined</e2>.",none,annotated
+0f2dbc3b-0f3e-444e-a688-ed8faebd1226,Seats must be fixed to a base if the floor of the seating area is sloped or if there are level differences between the floors of the respective rows of seats.,{'ID': '105_Finnish_SafetyOfUse'},Seats must be fixed to a base if the floor of the seating area is sloped or if there are <e1>level differences</e1> <e2>between the floors of the respective rows of seats</e2>.,selection,annotated
+0a7ff0c7-c5f9-4069-9d7e-2bfd6c4871d3_7,,,"The <e1>one-hour  A-weighted  equivalent continuous sound level of impulsive, narrow-band or low-frequency noise</e1> of the extension does not exceed <e2>0.3</e2>.",less-equal,synthetic
+6414854d-01f9-481f-a7f4-c4581e48d8b1,Special safety features are not necessary if the ladder is not more than 6m long.,{'ID': '112_UK_DocK_ProtectionFromFalling'},Special <e1>safety features</e1> are <e2>not necessary</e2> if the ladder is not more than 6m long.,selection,annotated
+2f89cb06-3ee9-49b5-ac36-46f31ae3928f,Hot water pipework should be insulated in all areas inside and outside the building unless it can be demonstrated that the heat is always useful.,{'ID': '170_UK_DocM_V2_AccessAndUseOfBuildings'},Hot water pipework should be insulated in all <e1>areas</e1> <e2>inside</e2> and outside the building unless it can be demonstrated that the heat is always useful.,selection,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479_9,,,Individual flights are: for gradients up to 1:15 not more than 10m long; for gradients up to 1:12 not more than <e1>55</e1> <e2>load</e2>.,less-equal,synthetic
+457ecdc0-8247-4ad4-9beb-3b7a31cfa0fd,"All public areas, including lavatory accommodation, public telephones and external terraces should be accessible.",{'ID': '138_UK_DocM_V2_AccessAndUseOfBuildings'},"All <e1>public areas</e1>, including lavatory accommodation, <e2>public</e2> telephones and external terraces should be accessible.",none,annotated
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_7,,,"The wall ties should have a horizontal spacing of 900mm and a <e1>heat recovery</e1> of <e2>15mm</e2>, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",equal,synthetic
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9,"In buildings more than 9 metres and at most 28 metres in height, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",{'ID': '126_Finnish_SafetyOfUse'},"In <e1>buildings</e1> more than 9 metres and at most 28 metres in height, the <e2>attic</e2> and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",part-of,annotated
+01bd7c41-594c-4440-8058-c34f1c4bad09,"When determining the free area available for ventilation during sleeping hours, only the proportion of openings that can be opened securely should be considered to provide useful ventilation.",{'ID': '82_UK_DocO_Overheating'},"When determining the free area available for ventilation during sleeping hours, only the <e1>proportion</e1> of openings that can be opened securely should be <e2>considered to provide useful ventilation</e2>.",necessity,annotated
+74b9ee2c-0192-442d-b5a1-a2974d456429,"The dwelling is wheelchair adaptable such that key parts of the accommodation, including sanitary facilities and kitchens, could be easily altered to meet the needs of a wheelchair user or, where required by a local planning authority, the dwelling is wheelchair accessible.",{'ID': '67_UK_DocM_V1_AccessAndUseOfBuildings'},"The dwelling is wheelchair adaptable such that key parts of the accommodation, including sanitary facilities and kitchens, could be easily altered to meet the needs of a wheelchair user or, <e1>where required by a local planning authority</e1>, the <e2>dwelling is wheelchair accessible</e2>.",necessity,annotated
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3_3,,,"Where the cost of installing only cable routes is more than 7% of the total cost of the major <e1>thermal bridging</e1>, there is no <e2>control appliance</e2> to install either electric vehicle charge points or cable routes.",not-part-of,synthetic
+c7035b48-7244-40a9-a70e-1d244caf72ac,"The same approved calculation tool must be used to calculate the target primary energy rate, target emission rate and target fabric energy efficiency rate and the dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate.",{'ID': '56_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The same approved calculation tool must be used to calculate the target primary energy rate, <e1>target emission rate</e1> and target fabric energy efficiency rate and the dwelling primary energy rate, dwelling emission rate and <e2>dwelling fabric energy efficiency rate</e2>.",none,annotated
+596cc55c-f50f-4155-962f-832b87226a8e,"For mechanical ventilation systems, fan units should be appropriately sized so that fans operating in normal background ventilation mode are not overly noisy.",{'ID': '23_UK_DocF_V1_Ventilation'},"For mechanical ventilation systems, <e1>fan units</e1> should be <e2>appropriately sized</e2> so that fans operating in normal background ventilation mode are not overly noisy.",necessity,annotated
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the <e1>premises</e1> to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. <e2>heat distribution room</e2>; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",necessity,annotated
+56b0e4bf-81d7-4ab9-855b-780ef2f0b1d3,"Storage premises with a fire load exceeding 1,200 MJ/m2 are not permitted within the building.",{'ID': '73_Finnish_FireSafety'},"<e1>Storage premises</e1> with a fire load exceeding 1,200 MJ/m2 are <e2>not permitted within the building</e2>.",necessity,annotated
+7d877df3-9aa7-4dff-a64d-5356a66c944d,"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a width exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",{'ID': '59_Finnish_SafetyOfUse'},"In public outdoor and indoor spaces, and in business and service premises, a <e1>handrail</e1> must <e2>continue at least 300 millimetres past the start and end points of the structure</e2>, and in the case of stairs or ramps that have a width exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",necessity,annotated
+a15ee053-da1e-44cd-bdd9-76cdcb68eaee,"Whenever the building is moved to a new location, in which its intended time of use is less than two years, these calculations can be provided as evidence that the energy efficiency requirements are met.",{'ID': '87_UK_DocM_V2_AccessAndUseOfBuildings'},"Whenever the building is moved to a new location, in which its intended time of use is less than two years, <e1>these calculations</e1> can be <e2>provided as evidence that the energy efficiency requirements are met</e2>.",necessity,annotated
+c384013b-c40f-4925-acbe-465e1ca5bc13,One photograph per detail should be recorded.,{'ID': '480_UK_DocL_V1_ConsrvationOfFuelAndPower'},One <e1>photograph</e1> per detail should be <e2>recorded</e2>.,necessity,annotated
+3e9fc57e-bc69-4f17-a056-dd7767afa9bb_10,,,"If the <e1>CO2 emission factor</e1> of the building does not exceed <e2>1,500 millimetres</e2>, access to the attic fire compartments from the outside shall be required.",less-equal,synthetic
+05864826-21ef-4ae7-9af8-2aaeffc7267a_2,,,Modular and portable buildings with a planned service life of more than two years but with an <e1>ventilation provision</e1> in a single location of less than <e2>400 millimetres</e2> should be shown to comply with the energy efficiency requirements.,less,synthetic
+63af9f99-6939-4e8c-a6a9-8b10942e1597_2,,,"The handle to at least <e1>0.15 dm3/s per m2</e1> <e2>energy savings</e2> in the principal living area is located between 450mm and 1200mm above floor level, unless the window is fitted with a remote opening device that is within this height range.",greater-equal,synthetic
+3ec9d4e7-3526-411c-8b30-0c7671660ed1,"The relationship between the kitchen, dining and living areas should be convenient and step-free.",{'ID': '91_UK_DocM_V1_AccessAndUseOfBuildings'},"The <e1>relationship</e1> <e2>between the kitchen, dining and living areas</e2> should be convenient and step-free.",selection,annotated
+bde1697a-20c9-4f15-a63c-5be323a058c1,Any connection of two or more air handling units to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,{'ID': '90_Finnish_Health-IndoorClimateAndVentilation'},Any <e1>connection</e1> of two or more <e2>air handling units</e2> to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,part-of,annotated
+8e8f4fb5-00b5-404f-89df-a07287984748_7,,,"In buildings with a <e1>maintained</e1> greater than <e2>2,100 millimetres</e2>, automatic meter reading and data collection facilities should be installed.",greater,synthetic
+a8b3e54e-902c-4502-99a2-8c41d46f1416_2,,,"If there are more than <e1>15mm</e1> <e2>ventilation  system</e2> in a space, they must be linked to one another in at least four groups, unless the chairs are placed around tables.",greater,synthetic
+e4fb8d18-8dbc-4351-a2df-d87f880f476a_0,,,The <e1>air flow rates</e1> for balconies is <e2>200 lux</e2> that of the load-bearing structures of the storey.,equal,synthetic
+35cacecf-06dc-4b0f-aadb-db2ee05518c7_7,,,The area of windows and roof windows (but excluding display windows) <e1>same</e1> exceeds <e2>75 light source lumens per circuit-watt</e2> of the facade area.,greater,synthetic
+8e8f4fb5-00b5-404f-89df-a07287984748_11,,,"In buildings with a <e1>total extract air flow</e1> greater than <e2>600kg/m3</e2>, automatic meter reading and data collection facilities should be installed.",greater,synthetic
+66b3628a-f0ee-4bc7-93c8-2ae0145a2e78_1,,,"In a <e1>compliance checklist</e1> with no openable <e2>surfaces</e2>, an intermittent extract fan should be provided with controls which continue to operate the fan for at least 15 minutes after the room is vacated.",not-part-of,synthetic
+ff3e8f86-1542-4f54-a776-cfdc8482bad7_5,,,"The <e1>one-hour  A-weighted  equivalent continuous sound level of impulsive, narrow-band or low-frequency noise</e1> of an air conditioner working in cooling mode should be a minimum of <e2>30</e2>.",greater-equal,synthetic
+50e89a86-e2be-439d-b230-79274cd7199b,Modular and portable buildings with a planned service life of more than two years at a single location should be shown to comply with the energy efficiency requirements.,{'ID': '81_UK_DocM_V2_AccessAndUseOfBuildings'},Modular and portable buildings with a planned <e1>service life</e1> of more than <e2>two years</e2> at a single location should be shown to comply with the energy efficiency requirements.,greater,annotated
+9eb5bf01-3810-44e3-802b-7c7eadad1831,"Mechanical ventilation systems, including both continuous and intermittent mechanical ventilation, should be designed and installed to minimise noise.",{'ID': '21_UK_DocF_V1_Ventilation'},"<e1>Mechanical</e1> <e2>ventilation systems</e2>, including both continuous and intermittent mechanical ventilation, should be designed and installed to minimise noise.",selection,annotated
+01d924bf-4a69-4eb8-b05e-ce993aee3d45_2,,,Perimeter insulation should be continuous and have a minimum <e1>heat gain</e1> of <e2>1.3 seconds</e2>.,greater-equal,synthetic
+34a524ec-6994-426f-86af-78788fd34a80,"Between the locking points for the mortice lock and surface-mounted rim lock, the distance should be 400-600mm.",{'ID': '36_UK_DocQ_Security_Dwellings'},"Between the locking points for the <e1>mortice lock</e1> and surface-mounted rim lock, the <e2>distance</e2> should be 400-600mm.",part-of,annotated
+164122ed-c7ac-4cf8-8a54-3d56c144f78d_3,,,"In general, the findings indicate that there should be at least the same number of <e1>day-care institutions</e1> as <e2>boiler interlock</e2> and for some building types, e.g. large retail buildings, at least twice as many.",greater-equal,synthetic
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the <e1>premises</e1> to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. <e2>laundry room</e2>; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",necessity,annotated
+6075de3c-d339-4ba4-9945-990480975615_6,,,"Where a kitchen and living room accommodation are not separate rooms (i.e. open plan), no fewer than <e1>6mm</e1> <e2>Part 2 and 3</e2> of the same equivalent area as for other habitable rooms should be provided within the open-plan space.",greater-equal,synthetic
+8207751f-13b8-4fe3-9bfe-4423093d4905,A  building  with  dwellings  or  accommodation  or  patient  rooms  shall  be  designed  and implemented so that the reverberation time of the staircase and exit route is no more than 1.3 seconds.,{'ID': '26_Finnish_AcousticEnvironment'},A building with <e1>dwellings</e1> or accommodation or <e2>patient rooms</e2> shall be designed and implemented so that the reverberation time of the staircase and exit route is no more than 1.3 seconds.,none,annotated
+74b9ee2c-0192-442d-b5a1-a2974d456429,"The dwelling is wheelchair adaptable such that key parts of the accommodation, including sanitary facilities and kitchens, could be easily altered to meet the needs of a wheelchair user or, where required by a local planning authority, the dwelling is wheelchair accessible.",{'ID': '67_UK_DocM_V1_AccessAndUseOfBuildings'},"The dwelling is <e1>wheelchair adaptable</e1> such that key parts of the accommodation, including <e2>sanitary facilities</e2> and kitchens, could be easily altered to meet the needs of a wheelchair user or, where required by a local planning authority, the dwelling is wheelchair accessible.",none,annotated
+4e4fdf56-c45b-4d89-b18f-7a2f24a41ba9,"In spaces intended for more than 60 persons, the width of the access route must be at least 1,200 millimetres.",{'ID': '116_Finnish_SafetyOfUse'},"In spaces intended for more than 60 persons, the <e1>width</e1> of the access route must be at least <e2>1,200 millimetres</e2>.",greater-equal,annotated
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be class E 15.",{'ID': '134_Finnish_FireSafety'},"The fire compartmenting requirement for the balcony slab of a glazed balcony of a <e1>building</e1> exceeding two storeys is EI 30; however, <e2>minor</e2> sealing parts and penetrations may be class E 15.",none,annotated
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_3,,,"In buildings more than 9 metres and at most <e1>two persons per square metre</e1> in <e2>intermediate landing</e2>, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",less-equal,synthetic
+2f8d4247-e53b-49ae-bd26-c4f1765eaee8_5,,,"Extract air of <e1>design solar load</e1> 2, 3 and <e2>24 degrees Celsius</e2> shall not be used as recirculation air.",equal,synthetic
+ef4ec541-e1a7-47d4-9a83-94715d8900ba_5,,,"Where <e1>60 persons</e1> or more <e2>extension</e2> are within a covered car park, the requirement to install electric vehicle charge points should be met by installing charge points in parking spaces that are not within a covered car park.",greater-equal,synthetic
+c0a6d35c-cc20-428b-941d-c3e3e6365c74_9,,,"In a tier that is uninterrupted by cross-gangways, and where the <e1>installation</e1> exceeds <e2>0.1m2</e2>, use a maximum number of steps of 40.",greater,synthetic
+0096a3bf-ac16-4a75-adf9-8c3f4a9b8610_3,,,The smaller <e1>manufacturers declared efficiencies</e1> of each panel which can be either the width or height of the panel should be <e2>900 millimetres</e2> or less.,less-equal,synthetic
+389c960b-525d-4f2e-9a2c-1805eb2dc20d_6,,,The full <e1>installation</e1> under a stair that forms part of the storage provision should be counted as <e2>5m</e2>.,equal,synthetic
+56517433-cf40-4b88-a9d4-18e61e0e9993_1,,,"In addition, on both sides of the toilet seat there shall be a <e1>roof windows</e1> of at least <e2>twice the rise plus the going (2R G)</e2>.",greater-equal,synthetic
+7f065688-203b-42d0-acb9-8fde5ff37821,Main distribution routes should be through vertical risers to minimise heat gains into common spaces.,{'ID': '44_UK_DocO_Overheating'},<e1>Main</e1> <e2>distribution routes</e2> should be through vertical risers to minimise heat gains into common spaces.,selection,annotated
+a4fccc69-c508-4405-92aa-2cfe36bfca39,Exits of parts of the building separated by a fire wall must be constructed separately so that in the event of a fire there is no need to use any door that may be in the fire wall.,{'ID': '209_Finnish_FireSafety'},Exits of <e1>parts</e1> of the <e2>building</e2> separated by a fire wall must be constructed separately so that in the event of a fire there is no need to use any door that may be in the fire wall.,part-of,annotated
+973c9430-2b4a-4ab4-82df-7060c3002f77_2,,,The <e1>slope</e1> for the community heating primary circuit should be a minimum of <e2>2.4 metres</e2>.,greater-equal,synthetic
+7d7d55f1-b28d-4ce8-aec6-dd4dc0786ce8_0,,,"For sizes of cylinder not listed, the <e1>commissioning notice</e1> from the cylinder should not exceed <e2>13l/s</e2>, where V is the volume in litres.",less-equal,synthetic
+113b8bf8-1856-45f5-a54b-d65ef100b437_7,,,"If a gas-fired combination boiler is installed in an existing dwelling, at least <e1>1,200 millimetres</e1> of the following <e2>axle group load</e2>, appropriate to the system, should be installed.",greater-equal,synthetic
+c47598f9-df79-4d77-aba9-8f380342372f_7,,,extract air of <e1>Capacities</e1> <e2>four</e2> shall be conducted to the outdoors through individual extract air ducts.,equal,synthetic
+40b40b1b-d1b1-49d8-b9b7-13c5845a169d,The structure of the control appliance of the plumbing fixture shall be such that its surface temperature does not arise above 40 degrees Celsius.,{'ID': '71_Finnish_Health-WaterAndSewerage'},The structure of the control appliance of the <e1>plumbing fixture</e1> shall be such that its <e2>surface temperature</e2> does not arise above 40 degrees Celsius.,none,annotated
+9fee4426-8d7f-40f9-bc6f-562a5d3fd9b4,"For roofs insulated at ceiling level, the long-term protection of the insulation layer should be considered: boarded areas should be provided above the insulation to give access for maintenance.",{'ID': '144_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For <e1>roofs</e1> insulated at ceiling level, the long-term protection of the <e2>insulation layer</e2> should be considered: boarded areas should be provided above the insulation to give access for maintenance.",part-of,annotated
+8207751f-13b8-4fe3-9bfe-4423093d4905,A  building  with  dwellings  or  accommodation  or  patient  rooms  shall  be  designed  and implemented so that the reverberation time of the staircase and exit route is no more than 1.3 seconds.,{'ID': '26_Finnish_AcousticEnvironment'},A building with dwellings or accommodation or patient rooms shall be designed and implemented so that the <e1>reverberation time</e1> of the <e2>staircase</e2> and exit route is no more than 1.3 seconds.,part-of,annotated
+4d80c4d1-08ee-481a-9f9c-e9151ce1094d_8,,,"The <e1>surface</e1> of windows, roof windows, rooflights and doors should not exceed <e2>01:08:00</e2> of the total floor area of the dwelling.",less-equal,synthetic
+01d924bf-4a69-4eb8-b05e-ce993aee3d45_4,,,Perimeter insulation should be continuous and have a minimum <e1>gradient</e1> of <e2>20</e2>.,greater-equal,synthetic
+56166e36-b14b-4632-9767-70b71d335d9c,"When a dwelling undergoes a major renovation, the technical, environmental and economic feasibility of installing high-efficiency alternative systems should be considered.",{'ID': '98_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When a dwelling undergoes a major renovation, the technical, environmental and <e1>economic</e1> <e2>feasibility of installing high-efficiency alternative systems</e2> should be considered.",selection,annotated
+53bb982d-5260-4a69-a6dd-71e4f074e676,The depth of standing rows must be at least half a metre.,{'ID': '111_Finnish_SafetyOfUse'},The <e1>depth</e1> of standing rows must be at least <e2>half a metre</e2>.,greater-equal,annotated
+d728a9c8-0302-4bd1-b69b-0daeefce30d1,"Where a service building has a reception or sales counter, there should be convenient access to it and part of it should be at a level suitable for a wheelchair user or a seated person.",{'ID': '84_UK_DocM_V2_AccessAndUseOfBuildings'},"Where a service building has a <e1>reception</e1> or sales counter, there should be convenient access to it and part of it should be <e2>at a level suitable for a wheelchair user or a seated person</e2>.",none,annotated
+9027959e-efc1-4d32-acbe-e0775d40f001_6,,,"The morticed bolts should have a minimum <e1>length</e1> of <e2>200 Watts per room</e2>, should be at least 100mm from the top and bottom corners of the door, and should avoid any door construction joints.",greater-equal,synthetic
+c9983da5-23f1-4211-88ce-68e4753e4ab9,"A target primary energy rate, target emission rate, building primary energy rate and the building emission rate should be calculated for non-exempt buildings with low energy demand.",{'ID': '102_UK_DocM_V2_AccessAndUseOfBuildings'},"A target primary energy rate, <e1>target emission rate</e1>, building primary energy rate and the building emission rate should be <e2>calculated for non-exempt buildings with low energy demand</e2>.",necessity,annotated
+99a53f17-48cb-4012-a47b-700761e0983b_0,,,Where a new building which is not a residential building or a mixed-use building has more than <e1>01:20:00</e1> <e2>residential block of flats</e2> (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,greater,synthetic
+cf35d4a4-3170-421b-9be1-b68d928eed1d_7,,,"A roof with a <e1>luminous efficacy</e1> greater than <e2>60</e2> must be constructed making appropriate use of walkways, roof ladders, safety ladders, roof stairs, roof treads and foot rails.",greater,synthetic
+009e12eb-db83-485c-9ffc-e1f462251109,Each air terminal should have a free area of at least 90 of the free area of its associated duct.,{'ID': '115_UK_DocF_V1_Ventilation'},Each air terminal should have a <e1>free area</e1> of at least <e2>90</e2> of the free area of its associated duct.,greater-equal,annotated
+09b2a395-5293-4b7d-82d4-5312482d59e9,"Door entry controls, where provided, are mounted 900-1000mm above finished ground level, and at least 300mm away from any projecting corner.",{'ID': '46_UK_DocM_V1_AccessAndUseOfBuildings'},"Door entry controls, where provided, are mounted 900-1000mm above finished ground level, and at least <e1>300mm</e1> <e2>away</e2> from any projecting corner.",greater-equal,annotated
+9fee4426-8d7f-40f9-bc6f-562a5d3fd9b4,"For roofs insulated at ceiling level, the long-term protection of the insulation layer should be considered: boarded areas should be provided above the insulation to give access for maintenance.",{'ID': '144_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For roofs <e1>insulated at ceiling level</e1>, the long-term protection of the <e2>insulation layer</e2> should be considered: boarded areas should be provided above the insulation to give access for maintenance.",none,annotated
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77,Skirtings totalling up to 50mm total thickness and shallow projecting ducts or casings above 1800mm may be discounted when measuring clear width.,{'ID': '131_UK_DocM_V1_AccessAndUseOfBuildings'},<e1>Skirtings</e1> totalling up to 50mm <e2>total thickness</e2> and shallow projecting ducts or casings above 1800mm may be discounted when measuring clear width.,part-of,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479_3,,,Individual flights are: for gradients up to 1:15 not more than <e1>200 m2</e1> <e2>frequency</e2>; for gradients up to 1:12 not more than 5m long.,less-equal,synthetic
+c8a048c6-8e7e-4b5a-ada5-02990b983401,"A natural ventilation system, a mechanical extract ventilation system or a mechanical supply and extract ventilation system shall not be designed to be combined in such a way that the directions of air flow between the rooms and in the ductworks may change when the air flows are being controlled.",{'ID': '91_Finnish_Health-IndoorClimateAndVentilation'},"A natural <e1>ventilation system</e1>, a mechanical extract ventilation system or a mechanical supply and extract ventilation system shall <e2>not be designed to be combined in such a way that the directions of air flow between the rooms and in the ductworks may change when the air flows are being controlled</e2>.",necessity,annotated
+aa41a5d4-c0b1-4da7-84a0-5c2e2738654f_9,,,The total number of ventilators installed in the dwellings habitable rooms and kitchens should be at least the following: Five ventilators if the dwelling has more than <e1>20 millimetres</e1> <e2>System controls</e2>.,greater,synthetic
+f162906e-1097-420e-b2a0-dd746d5794c7,"Where controls are external to the heater, the system should be provided with a time switch/programmer and room thermostat, or programmable room thermostat.",{'ID': '265_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where <e1>controls</e1> are external to the heater, the system should be provided with a time switch/programmer and room thermostat, or programmable <e2>room thermostat</e2>.",none,annotated
+55d84237-8fad-4bd7-b67d-0745b9cc1e31,"The doors of exits, and of areas leading to them, must be easy to open in an emergency.",{'ID': '222_Finnish_FireSafety'},"The <e1>doors</e1> of exits, and of areas leading to them, must be <e2>easy to open in an emergency</e2>.",necessity,annotated
+7e34700e-92de-4b00-a820-f4085a2e186c_8,,,"If the free gap between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than 2 metres, the wall in question must be <e1>dimension</e1> <e2>100 litres</e2>.",equal,synthetic
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_5,,,"In buildings more than <e1>eight per cent</e1> and at most 28 metres in <e2>structure</e2>, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",greater,synthetic
+39a37d5e-3361-43b9-a209-e5cd45918abc,"For mixed-use buildings which have parking spaces within a covered car park, any requirements to install electric vehicle charge points or cable routes must first be applied to those parking spaces outside the covered car park.",{'ID': '95_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"For <e1>mixed-use</e1> <e2>buildings</e2> which have parking spaces within a covered car park, any requirements to install electric vehicle charge points or cable routes must first be applied to those parking spaces outside the covered car park.",selection,annotated
+8364a5f1-f80e-484c-9f38-bffc6f4c1876_6,,,"Where communal parking is provided to blocks of flats, at least <e1>120</e1> standard <e2>Extract air</e2> is provided close to the communal entrance of each core of the block (or to the lift core where the parking bay is internal).",greater-equal,synthetic
+590ab551-79e8-42f5-bc52-749f8899c088,Extinguishing routes to basement storeys shall be arranged so that basement storeys can be reached from the ground level without a need to pass through the exits of the storeys.,{'ID': '242_Finnish_FireSafety'},<e1>Extinguishing routes</e1> to basement storeys shall be <e2>arranged</e2> so that basement storeys can be reached from the ground level without a need to pass through the exits of the storeys.,necessity,annotated
+a922fe4e-30c9-4fef-a442-27459b959914,Vertical service pipes shall be equipped with mechanical or structural leak detectors at each floor if the service pipes are not visible.,{'ID': '82_Finnish_Health-WaterAndSewerage'},Vertical service pipes shall be equipped with <e1>mechanical</e1> or structural <e2>leak detectors</e2> at each floor if the service pipes are not visible.,selection,annotated
+d504fd87-d13d-4936-9d7a-71d17954760d_10,,,The <e1>free gap</e1> of the steps in an exit may be no more than <e2>1 in 40</e2>.,less-equal,synthetic
+60205cf2-fa87-4195-9415-a6fb144a9b72,"Entrances and passageways to playgrounds and recreation areas used in the wintertime, as well as street areas surrounding the building and other public areas, must be protected from snow and ice falling from the roof of the building using snow barriers, taking into account the pitch of the roof.",{'ID': '96_Finnish_SafetyOfUse'},"<e1>Entrances</e1> and passageways to playgrounds and <e2>recreation areas</e2> used in the wintertime, as well as street areas surrounding the building and other public areas, must be protected from snow and ice falling from the roof of the building using snow barriers, taking into account the pitch of the roof.",part-of,annotated
+9dd2a0f1-0ff9-4416-8abd-1e6589980ff4_1,,,"If the <e1>internal temperature</e1> of a mechanical ventilation systems air duct is designed to be greater than <e2>500kW</e2>, the outdoor air and exhaust air ducts shall be fitted with shutoff dampers that close automatically when the system shuts down.",greater,synthetic
+13a437c0-918c-47f2-85bd-b80dd69eb027_10,,,"There are no <e1>cold side</e1> on the <e2>visual contrast</e2> of display windows and similar glazing, but for new buildings their impact must be taken into account in the calculation of primary energy and CO2 emissions.",not-part-of,synthetic
+8efb6108-e49e-4d64-a1e4-22e3f9128b17,"When calculating the reference heat loss of a building, the value of 2.0 m3/(h m2) shall be used as the reference value for the air leakage rate figure for the building envelope.",{'ID': '136_Finnish_EnergyEfficiency'},"When calculating the reference heat loss of a building, the value of 2.0 m3/(h m2) shall be used as the <e1>reference value</e1> for the <e2>air leakage rate figure</e2> for the building envelope.",part-of,annotated
+05864826-21ef-4ae7-9af8-2aaeffc7267a_10,,,Modular and portable buildings with a planned service life of more than two years but with an <e1>luminous efficacy</e1> in a single location of less than <e2>1m2</e2> should be shown to comply with the energy efficiency requirements.,less,synthetic
+2c8d2bc3-cf23-48f8-b9c0-b90f150f9f93,"Any walls, doors and windows should be insulated and draught-proofed to at least the same extent as in the existing building.",{'ID': '426_UK_DocM_V2_AccessAndUseOfBuildings'},"Any walls, <e1>doors</e1> and windows should be <e2>insulated</e2> and draught-proofed to at least the same extent as in the existing building.",necessity,annotated
+81f14fc1-af5d-45e8-8725-94d2510e4701,"A dwelling that is intended for service housing or supported housing of a person with mobility and functional impairment shall, irrespective of the number of storeys in the building, have a turning  space  with  a  diameter  of  at  least  1,500  millimetres  in  the  hallway  and  kitchen.",{'ID': '29_Finnish_Accessibility'},"A <e1>dwelling</e1> that is <e2>intended for service housing or supported housing of a person with mobility and functional impairment</e2> shall, irrespective of the number of storeys in the building, have a turning space with a diameter of at least 1,500 millimetres in the hallway and kitchen.",selection,annotated
+20216261-f56d-4f79-8a46-c781abe19f04,"For new and existing buildings other than dwellings, information should be provided in a new or existing building log book.",{'ID': '98_UK_DocF_V2_Ventilation'},"For new and <e1>existing</e1> buildings <e2>other than dwellings</e2>, information should be provided in a new or existing building log book.",none,annotated
+81314489-dcd9-410f-9b15-595b87e7c8f9_0,,,"The resilient layer should be timber sheathing at least <e1>21 C</e1> <e2>boiler type</e2>, expanded metal or a similar resilient material.",greater-equal,synthetic
+7c74b365-6fdd-494d-9675-3ae036c55348,Ladders and other structural elements at emergency exits and service routes must be designed and constructed so that they can also be used in an emergency situation.,{'ID': '82_Finnish_SafetyOfUse'},Ladders and other <e1>structural elements</e1> at <e2>emergency exits</e2> and service routes must be designed and constructed so that they can also be used in an emergency situation.,part-of,annotated
+f1b9829d-7ac3-4bc5-918a-5bbb8d663a35,"For space heating systems, temperature control should be installed for the heating appliance.",{'ID': '248_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For <e1>space heating systems</e1>, <e2>temperature control</e2> should be installed for the heating appliance.",part-of,annotated
+d713514a-9398-45a2-9584-efecff6ebcc5,Reasonable provision must be made to resist unauthorised access to (a) any dwelling; and (b) any part of a building from which access can be gained to a flat within the building.,{'ID': '4_UK_DocQ_Security_Dwellings'},Reasonable provision must be made to resist unauthorised access to (a) any <e1>dwelling</e1>; and (b) any part of a building from which <e2>access can be gained to a flat within the building</e2>.,none,annotated
+eefe1191-2903-4fb8-9138-6471e09fb67d_0,,,The <e1>domestic hot water circulation heat loss</e1> exceeds <e2>390 millimetres</e2> at 11pm.,greater,synthetic
+d342429e-d3fc-46e0-a195-527cfef1fd4b_6,,,"When an existing building with a total useful <e1>number of storeys</e1> of over <e2>0.5 kN/m2</e2> is being extended or the habitable area is being increased, consequential improvements should be installed.",greater,synthetic
+d3fc8c9b-c23a-4188-8723-369caa90453c,"The reference value for a building's total combined window area is 15 of the sum total of the floor  plate areas  of  the  buildings  storeys that  are  fully  or in  part  above  the  ground  but, however, at most 50 of the building's facade area.",{'ID': '124_Finnish_EnergyEfficiency'},"The reference value for a <e1>building's</e1> total combined window area is 15 of the sum total of the floor plate areas of the buildings storeys that are fully or in part above the ground but, however, at most 50 of the <e2>building's</e2> facade area.",none,annotated
+f7935bb4-9e5f-4e91-bbf1-54e45c1ef24c_3,,,A building with a <e1>location</e1> exceeding <e2>01:20:00</e2> must be equipped with anchoring structures for safety lines.,greater,synthetic
+5ba5ffe7-ece8-488a-b461-da66237e7888,"All walls, ducts and boxings to the WC/cloakroom, bathroom and shower room should be strong enough to support grab rails, seats and other adaptations that could impose a load of up to 1.5kN/m2.",{'ID': '54_UK_DocM_V1_AccessAndUseOfBuildings'},"All walls, <e1>ducts</e1> and boxings to the WC/cloakroom, bathroom and shower room should be <e2>strong enough to support grab rails, seats and other adaptations that could impose a load of up to 1.5kN/m2</e2>.",necessity,annotated
+977ccb7b-4580-4ea3-9ea4-5057925c9854,"NOTE: The surface area of the whole building must be included when assessing whether the works constitute a major renovation, even if the building is mixed use.",{'ID': '124_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"NOTE: The surface area of the whole <e1>building</e1> must be included when assessing whether the works constitute a major renovation, even if the <e2>building</e2> is mixed use.",none,annotated
+c47598f9-df79-4d77-aba9-8f380342372f_9,,,extract air of <e1>mechanical ventilation</e1> <e2>25 decibels</e2> shall be conducted to the outdoors through individual extract air ducts.,equal,synthetic
+8e9ef8dc-18bd-4877-98cd-556aa4adee8f,"Reasonable provision shall be made for the conservation of fuel and power in buildings by: (a) limiting heat gains and losses (i) through thermal elements and other parts of the building fabric; and (ii) from pipes, ducts and vessels used for space heating, space cooling and hot water services; (b) providing fixed building services which (i) are energy efficient to a reasonable standard; (ii) have effective controls; and (iii) are commissioned by testing and adjusting as necessary to ensure they use no more fuel and power than is reasonable in the circumstances.",{'ID': '431_UK_DocM_V2_AccessAndUseOfBuildings'},"Reasonable provision shall be made for the conservation of fuel and power in buildings by: (a) <e1>limiting heat gains and losses</e1> (i) through thermal elements and other parts of the building fabric; and (ii) from pipes, ducts and vessels used for space heating, space cooling and hot water services; (b) <e2>providing fixed building services</e2> which (i) are energy efficient to a reasonable standard; (ii) have effective controls; and (iii) are commissioned by testing and adjusting as necessary to ensure they use no more fuel and power than is reasonable in the circumstances.",none,annotated
+77be05f2-cd8c-4d35-85e4-6637b999d8e7_6,,,The <e1>selection</e1> of the consequential improvement works should not be less than <e2>1100mm</e2> of the value of the principal works.,greater-equal,synthetic
+efd2d371-97de-4d5e-af06-e404ff71f316,The impact of the ground and crawl space on heat loss shall be taken into account in heat loss calculations.,{'ID': '91_Finnish_EnergyEfficiency'},The impact of the <e1>ground</e1> and <e2>crawl space</e2> on heat loss shall be taken into account in heat loss calculations.,none,annotated
+6594919a-cde6-4dd8-be04-eb61e30f99bb,"Snow or rain-water shall not be allowed to ingress the ventilation system via externally mounted air transfer devices in quantities causing damage to the system, lowering air quality or impairing the functioning of the system.",{'ID': '67_Finnish_Health-IndoorClimateAndVentilation'},"<e1>Snow</e1> or rain-water shall <e2>not be allowed to ingress the ventilation system via externally mounted air transfer devices in quantities causing damage to the system, lowering air quality or impairing the functioning of the system</e2>.",necessity,annotated
+113b8bf8-1856-45f5-a54b-d65ef100b437_8,,,"If a gas-fired combination boiler is installed in an existing dwelling, at least <e1>0.9 metres</e1> of the following <e2>target primary energy rate</e2>, appropriate to the system, should be installed.",greater-equal,synthetic
+f6add908-4d45-4b3e-83a6-369f6c36c037_4,,,"Door rails, stiles and muntins should be at least <e1>35 mg/m3 (30 ppm)</e1> <e2>height</e2>.",greater-equal,synthetic
+20518e80-6f7e-457f-8c5a-59fa4c0eb324,"When calculating the heat loss for a buildings design solution, the design value shall be used as the value of the air leakage rate figure for the building envelope.",{'ID': '137_Finnish_EnergyEfficiency'},"When calculating the heat loss for a buildings design solution, the design value shall be used as the value of the air leakage rate figure for the <e1>building</e1> <e2>envelope</e2>.",part-of,annotated
+0365837b-a04d-4aaf-a2f5-2e89403a9c2b,"If all the terminals have to be set to a significantly closed position to achieve the required air flow rate, then the fan speed should be reduced and the terminals rebalanced.",{'ID': '200_UK_DocF_V1_Ventilation'},"If all the terminals have to be set to a significantly closed position to achieve the required air flow rate, then the fan speed should be reduced and the <e1>terminals</e1> <e2>rebalanced</e2>.",necessity,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_8,,,"If the air flows of extract air categories 1 and 2 are combined into the same duct and <e1>constraints</e1> <e2>9mm</e2> air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+c5a6cac6-a314-47b1-aabd-13f2d1b7ad56,A step-free approach route should be provided to all private entrances.,{'ID': '71_UK_DocM_V1_AccessAndUseOfBuildings'},A step-free <e1>approach route</e1> should be provided to all <e2>private</e2> entrances.,none,annotated
+5e7d4831-4ec8-48f9-9e60-0422fcc1eae4_1,,,"When replacing an existing system, the <e1>time-lapse</e1> of the new system should be no less than <e2>total floor area</e2> of the existing system, except where a smaller system can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",greater-equal,synthetic
+e43c1e88-be80-42d9-944e-1bf0f0f82479,Individual flights are: for gradients up to 1:15 not more than 10m long; for gradients up to 1:12 not more than 5m long.,{'ID': '18_UK_DocM_V1_AccessAndUseOfBuildings'},Individual flights are: for <e1>gradients</e1> up to <e2>1:15</e2> not more than 10m long; for gradients up to 1:12 not more than 5m long.,less-equal,annotated
+ebc429f0-cb90-41ab-9a11-401a2ddc7bad,"For continuous mechanical ventilation systems, such as continuous mechanical extract ventilation or mechanical ventilation with heat recovery, the system should be balanced to achieve design air flow rates at each room terminal.",{'ID': '268_UK_DocF_V1_Ventilation'},"For continuous mechanical <e1>ventilation systems</e1>, such as continuous mechanical <e2>extract ventilation</e2> or mechanical ventilation with heat recovery, the system should be balanced to achieve design air flow rates at each room terminal.",selection,annotated
+6d9a1e8e-6fe7-4234-951a-96fdc4598bd7,"If parking spaces are provided for a building, an adequate number of them, but at least one, shall be intended for the use of a person with mobility and functional impairment.",{'ID': '12_Finnish_Accessibility'},"If parking spaces are provided for a <e1>building</e1>, an adequate number of <e2>them</e2>, but at least one, shall be intended for the use of a person with mobility and functional impairment.",none,annotated
+793cb939-b3d9-46eb-ae65-71a4d5c8031b_4,,,Where the parking is within the private curtilage of the dwelling (but not within a carport or garage) at least one space is a standard parking bay that can be <e1>patterns</e1> to <e2>40</e2>.,less-equal,synthetic
+082c7ed9-3579-48c2-a0d2-076f1edd647c,"Each of the two sections of the centrally hinged window should be assessed as a single side, bottom or top hung window.",{'ID': '112_UK_DocO_Overheating'},"Each of the two <e1>sections</e1> of the centrally hinged <e2>window</e2> should be assessed as a single side, bottom or top hung window.",part-of,annotated
+5305da48-b810-4fd8-a0b3-7520f89ff401,"When installing or renovating thermal elements, the element being installed should be draught-proofed, and air-leakage gaps should be filled.",{'ID': '194_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When installing or renovating thermal elements, the element being installed should be draught-proofed, and <e1>air-leakage gaps</e1> should be <e2>filled</e2>.",necessity,annotated
+5f7b8ff7-50d0-46a2-a48b-fa19786c98fd,"If  the  domestic  hot  water cylinder  is  located  inside  the  building  envelope,  50  of  the  calculated  domestic  hot  water cylinder heat loss shall be added to the thermal load of the spaces of the building.",{'ID': '105_Finnish_EnergyEfficiency'},"If the domestic hot water cylinder is <e1>located inside the building envelope</e1>, 50 of the calculated <e2>domestic hot water cylinder heat loss</e2> shall be added to the thermal load of the spaces of the building.",none,annotated
+0aaf71f0-a482-4a72-a407-0d6db79c7f6f,"In a building consisting primarily of one storey, no more than 200 m2 of fire-compartmented and no more than 50 m2 of non-fire-compartmented areas that essentially relate to the business of the building may be located on the level of second storey.",{'ID': '69_Finnish_FireSafety'},"In a <e1>building</e1> consisting primarily of one storey, no more than <e2>200 m2</e2> of fire-compartmented and no more than 50 m2 of non-fire-compartmented areas that essentially relate to the business of the building may be located on the level of second storey.",none,annotated
+fb5d3054-4911-4049-ba09-1c3e80f9c07c,"The tread of steps in uncovered or unheated outdoor staircases must be no less than 390 millimetres, and the riser may be no more than 130 millimetres.",{'ID': '29_Finnish_SafetyOfUse'},"The tread of steps in uncovered or unheated outdoor staircases must be no less than <e1>390 millimetres</e1>, and the <e2>riser</e2> may be no more than 130 millimetres.",none,annotated
+29232335-402c-4ed9-af74-fd093ac22e28_2,,,The natural or mechanical ventilation system of a building shall be strong and its air-tightness shall be at least <e1>total load</e1> <e2>300 litres</e2>.,greater-equal,synthetic
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77,Skirtings totalling up to 50mm total thickness and shallow projecting ducts or casings above 1800mm may be discounted when measuring clear width.,{'ID': '131_UK_DocM_V1_AccessAndUseOfBuildings'},Skirtings totalling up to 50mm total thickness and shallow projecting ducts or <e1>casings</e1> above 1800mm may be <e2>discounted when measuring clear width</e2>.,necessity,annotated
+f51da5c6-7614-4719-8150-e22851e4aa12,"The building fabric should be constructed so that thermal bridging, including at the party wall, is reasonably limited.",{'ID': '152_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The building fabric should be <e1>constructed</e1> so that <e2>thermal bridging</e2>, including at the party wall, is reasonably limited.",selection,annotated
+46f5be2a-1514-420b-bc39-331fc6e0d2df_5,,,"The <e1>combined dead,imposed and wind loads</e1>, dwelling emission rate and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the <e2>load EER</e2>, target emission rate and target fabric energy efficiency rate, respectively.",less-equal,synthetic
+493ec553-7761-4d1e-aa98-05d925ddf955_10,,,The <e1>primary energy content</e1> of a horizontal hatch must be at least <e2>200 millimetres</e2>.,greater-equal,synthetic
+8cef7dc5-2d76-4dd8-80c5-6861b11a8f6f_3,,,"Where the work concerns a building containing more than <e1>60 persons</e1> <e2>damage</e2>, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",greater-equal,synthetic
+b4ae0bf1-8dec-4e43-b10b-4a593780d742,Partitioning doors in accommodation premises shall be equipped with closing devices.,{'ID': '121_Finnish_FireSafety'},Partitioning <e1>doors</e1> in accommodation premises shall be equipped with <e2>closing devices</e2>.,necessity,annotated
+371e1755-8bb5-456e-bf66-5a50f4c19d59,"Where there is full-height structural guarding, if you provide a second (lower) handrail, the vertical height from the pitch line of the steps (or the surface of the ramp) to the top of the second (lower) handrail should be 600mm.",{'ID': '50_UK_DocK_ProtectionFromFalling'},"Where there is full-height structural guarding, if you provide a second (lower) <e1>handrail</e1>, the vertical height from the pitch line of the steps (or the surface of the ramp) to the top of the second (lower) handrail should be <e2>600mm</e2>.",none,annotated
+9b329413-b6d6-4953-9b34-c82d3a2e9c44,"Before a new heating appliance is installed, all central heating and primary hot water circuits should be thoroughly cleaned and flushed out.",{'ID': '216_UK_DocM_V2_AccessAndUseOfBuildings'},"Before a new heating appliance is installed, all central heating and primary <e1>hot water circuits</e1> should be <e2>thoroughly cleaned and flushed out</e2>.",necessity,annotated
+f6add908-4d45-4b3e-83a6-369f6c36c037,"Door rails, stiles and muntins should be at least 44mm thick.",{'ID': '28_UK_DocQ_Security_Dwellings'},"Door rails, <e1>stiles</e1> and muntins should be at least 44mm <e2>thick</e2>.",part-of,annotated
+4e119abd-0cf7-4c60-9c7b-1083f9b46280,"NOTE: If an exposed facade is close to an area of sustained and loud noise (e.g. a main road), then a noise attenuating background ventilator should be fitted.",{'ID': '85_UK_DocF_V2_Ventilation'},"NOTE: If an <e1>exposed</e1> <e2>facade</e2> is close to an area of sustained and loud noise (e.g. a main road), then a noise attenuating background ventilator should be fitted.",selection,annotated
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3_4,,,"Where the cost of installing only cable routes is more than 7% of the total cost of the major <e1>going</e1>, there is no <e2>sunken</e2> to install either electric vehicle charge points or cable routes.",not-part-of,synthetic
+45adb0b6-63ee-4f42-b6a3-8fc396221c67_10,,,The <e1>standards</e1> of the insulation plus any required air gap should be at least to the <e2>relationship</e2> of the rafters.,greater-equal,synthetic
+e8340500-38b6-461b-b00d-d3aa44ac1f0b_2,,,The <e1>tie force</e1> of the water available from the hot water system may not exceed <e2>8 per cent (1:12.5)</e2>.,less-equal,synthetic
+bb3ac5b0-14d0-4d75-95d9-713adc6f2f58,"Any walls, doors and windows should be insulated and draught-proofed to at least the same extent as in the existing dwelling.",{'ID': '433_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Any walls, doors and <e1>windows</e1> should be insulated and <e2>draught-proofed</e2> to at least the same extent as in the existing dwelling.",necessity,annotated
+f3c5d35c-ad38-46d6-8a75-1a331555b89e,The index terminal flow rate should be set with the terminal fully open and all other terminals should be adjusted to achieve the required flow rates at each terminal.,{'ID': '206_UK_DocF_V1_Ventilation'},The index terminal flow rate should be set with the terminal fully open and all <e1>other</e1> <e2>terminals</e2> should be adjusted to achieve the required flow rates at each terminal.,selection,annotated
+0da52584-1b37-48b5-840f-3795ae695275_0,,,the minimum clear dimensions of the platform are: <e1>50 m2</e1> <e2>size</e2> and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+3639910c-8ebf-499a-aeec-6f1951b28134,"Additionally, insulated plaster-board should be used in reveals to abut jambs and should be considered within reveal soffits.",{'ID': '166_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Additionally, <e1>insulated</e1> <e2>plaster-board</e2> should be used in reveals to abut jambs and should be considered within reveal soffits.",selection,annotated
+825053cb-af5d-43a9-b59b-e2a5ae78ea73_8,,,The <e1>fire igniting</e1> of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the number of dwellings in the residential building; b. the <e2>extends</e2> of associated parking spaces.,greater,synthetic
+2f8d4247-e53b-49ae-bd26-c4f1765eaee8_4,,,"Extract air of <e1>above</e1> 2, 3 and <e2>40 degrees Celsius</e2> shall not be used as recirculation air.",equal,synthetic
+4d80c4d1-08ee-481a-9f9c-e9151ce1094d,"The area of windows, roof windows, rooflights and doors should not exceed 25 of the total floor area of the dwelling.",{'ID': '421_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The <e1>area</e1> of windows, roof windows, <e2>rooflights</e2> and doors should not exceed 25 of the total floor area of the dwelling.",part-of,annotated
+cea6e7bd-c494-4146-9f81-3fd2ed64a2a6_5,,,The <e1>minimum value</e1> of the floor surface in the seating area and access route may not exceed <e2>0.8 metres</e2>.,less-equal,synthetic
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_6,,,Skirtings totalling up to 50mm total thickness and shallow projecting ducts or <e1>shower room</e1> above <e2>400-600mm</e2> may be discounted when measuring clear width.,greater,synthetic
+6ec243f2-9294-4b7c-89a4-1c46e4a69cc9_10,,,"If site constraints necessitate an <e1>foundations</e1> of <e2>2.4 metres</e2> or steeper, an approach incorporating ramped access should be provided.",greater-equal,synthetic
+c7137e3d-e3f2-4a19-87bc-ccb194d42c74,"Incoming services: ducts, and cables wherever possible, should be grouped to minimise how often the air barrier is penetrated, while ensuring sufficient space to allow adequate screed flow between ducts.",{'ID': '178_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Incoming services: ducts, and <e1>cables</e1> wherever possible, should be <e2>grouped</e2> to minimise how often the air barrier is penetrated, while ensuring sufficient space to allow adequate screed flow between ducts.",necessity,annotated
+d54852df-8e3c-4e99-8484-31c403b78558,"If work is carried out on a system that includes a boiler, a boiler interlock should be installed.",{'ID': '256_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If work is carried out on a system that includes a boiler, a <e1>boiler interlock</e1> should be <e2>installed</e2>.",necessity,annotated
+3121fe90-27db-405e-a42a-df3cd22ee176,"Where necessary, two handrails, one above the other, must be installed in order to take into account children and users of wheelchairs.",{'ID': '55_Finnish_SafetyOfUse'},"Where necessary, <e1>two </e1>handrails, one above the other, must be <e2>installed</e2> in order to take into account children and users of wheelchairs.",none,annotated
+"8feaf7f2-dfd8-43ae-ab8d-791ee1ffd86c	However, if the elevation difference is no more than 1,000 millimetres, the ramp may not have a gradient of more than eight per cent.	{'ID': '9_Finnish_Accessibility'}_11",,,"However, if the <e1>air flow rates</e1> is no more than <e2>600kg/m3</e2>, the ramp may not have a gradient of more than eight per cent.",less-equal,synthetic
+43e26628-8b62-4cc6-91e2-284335df1564_3,,,"In rooms used for sleeping or rest, the <e1>domestic hot water circulation heat loss</e1> may not exceed <e2>200 Watts per room</e2>.",less-equal,synthetic
+7f3f59a4-fc7e-4b14-8074-384f6cacf548_7,,,"The height of a barrier in a dwellings indoor areas may, however, be at least 0.9 metres if the <e1>horizontal spacing</e1> is less than <e2>2m</e2>.",less,synthetic
+7f49ccb1-ce2c-47eb-8b22-2c8e806e5d88_3,,,The resilient layer should be to the full height of the door and <e1>ten millimetres</e1> <e2>drop</e2> of the doorset.,equal,synthetic
+bf798097-bb99-42d0-a73f-8cebab8fbeb8,"In the entrance halls and other indoor areas of administrative, service and business premises and in assembly areas, the riser of the steps must be no more than 160 millimetres and the tread must be no less than 300 millimetres.",{'ID': '21_Finnish_SafetyOfUse'},"In the entrance halls and other indoor areas of administrative, service and business premises and in assembly areas, the <e1>riser</e1> of the steps must be no more than <e2>160 millimetres</e2> and the tread must be no less than 300 millimetres.",less-equal,annotated
+46f5be2a-1514-420b-bc39-331fc6e0d2df,"The dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the target primary energy rate, target emission rate and target fabric energy efficiency rate, respectively.",{'ID': '356_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The dwelling primary energy rate, <e1>dwelling emission rate</e1> and dwelling fabric energy efficiency rate, all <e2>calculated using the measured air permeability</e2>, must not be higher than the target primary energy rate, target emission rate and target fabric energy efficiency rate, respectively.",selection,annotated
+6ec243f2-9294-4b7c-89a4-1c46e4a69cc9_1,,,"If site constraints necessitate an <e1>Voids</e1> of <e2>adequate number</e2> or steeper, an approach incorporating ramped access should be provided.",greater-equal,synthetic
+e43c1e88-be80-42d9-944e-1bf0f0f82479_7,,,Individual flights are: for gradients up to 1:15 not more than <e1>35 mg/m3 (30 ppm)</e1> <e2>exceptional circumstances</e2>; for gradients up to 1:12 not more than 5m long.,less-equal,synthetic
+082c7ed9-3579-48c2-a0d2-076f1edd647c_6,,,"Each of the <e1>50 m</e1> <e2>minimum value</e2> of the centrally hinged window should be assessed as a single side, bottom or top hung window.",equal,synthetic
+05864826-21ef-4ae7-9af8-2aaeffc7267a_3,,,Modular and portable buildings with a planned <e1>minimum value</e1> of more than <e2>800 millimetres</e2> but with an intended time of use in a single location of less than two years should be shown to comply with the energy efficiency requirements.,greater,synthetic
+33ed3038-99a6-4b2d-906a-a1db21f2d898,"For heating systems in new dwellings, or when a heat generator such as a boiler is replaced in an existing dwelling, each room should be provided with thermostatic room controls.",{'ID': '250_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For <e1>heating systems</e1> in new dwellings, or when a heat generator such as a boiler is replaced in an existing dwelling, each <e2>room</e2> should be provided with thermostatic room controls.",none,annotated
+19478a13-7457-4dd3-a394-744f826db7b0,"The handle to at least one window in the principal living area is 700-1000mm above floor level, unless fitted with a remote opening device that is within this height range.",{'ID': '127_UK_DocM_V1_AccessAndUseOfBuildings'},"The <e1>handle</e1> to at least one <e2>window</e2> in the principal living area is 700-1000mm above floor level, unless fitted with a remote opening device that is within this height range.",part-of,annotated
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9,"In buildings more than 9 metres and at most 28 metres in height, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",{'ID': '126_Finnish_SafetyOfUse'},"In buildings more than <e1>9 metres</e1> and at most <e2>28 metres</e2> in height, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",none,annotated
+bb3ac5b0-14d0-4d75-95d9-713adc6f2f58,"Any walls, doors and windows should be insulated and draught-proofed to at least the same extent as in the existing dwelling.",{'ID': '433_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Any walls, <e1>doors</e1> and windows should be insulated and <e2>draught-proofed</e2> to at least the same extent as in the existing dwelling.",necessity,annotated
+389c960b-525d-4f2e-9a2c-1805eb2dc20d_8,,,"The full <e1>annual percentage of heat</e1> under a stair that forms part of the storage provision should be counted as <e2>1,200 millimetres</e2>.",equal,synthetic
+29c431ee-ea93-491d-ab13-06418d93c488_6,,,"If <e1>total capital cost</e1> is greater than <e2>0.9 metres</e2>, manual control is acceptable.",greater,synthetic
+d0b6759e-deec-451d-bd7a-ec65b96048be_10,,,"extract air of <e1>sizes</e1> <e2>B</e2> shall be conducted through individual ducts, or common ducts serving spaces of the same type as regards level of air purity, to the outdoors, into a collection duct installed above the spaces it serves or into an extract air chamber.",equal,synthetic
+4470dde4-6422-4c13-9781-de68c3e075dc_9,,,"The outdoor <e1>sunken area</e1> of a dwelling unit, however, shall be designed to be a minimum of <e2>24 metres</e2>.",greater-equal,synthetic
+6075de3c-d339-4ba4-9945-990480975615_7,,,"Where a kitchen and living room accommodation are not separate rooms (i.e. open plan), no fewer than <e1>20mm</e1> <e2>Standing areas</e2> of the same equivalent area as for other habitable rooms should be provided within the open-plan space.",greater-equal,synthetic
+1c511111-ab71-4b68-9421-f588bc4b9180,"People with visual impairment should be in no doubt as to the location of glass doors, especially when they are within a glazed screen.",{'ID': '76_UK_DocM_V2_AccessAndUseOfBuildings'},"People <e1>with visual impairment</e1> should <e2>be in no doubt as to the location of glass doors, especially when they are within a glazed screen</e2>.",none,annotated
+13a437c0-918c-47f2-85bd-b80dd69eb027,"There are no limits on the design of display windows and similar glazing, but for new buildings their impact must be taken into account in the calculation of primary energy and CO2 emissions.",{'ID': '138_UK_DocM_V2_AccessAndUseOfBuildings'},"There are no limits on the design of display windows and similar glazing, but for new <e1>buildings</e1> their impact must be taken into account in the <e2>calculation of primary energy and CO2 emissions</e2>.",part-of,annotated
+aa7c5790-2189-451d-bd0e-956a257a7b6d,"In an existing system, when a boiler or hot water storage vessel is replaced, any accessible pipes in the dwelling should be insulated.",{'ID': '201_UK_DocL_V1_ConsrvationOfFuelAndPower'},"In an existing system, when a <e1>boiler</e1> or hot water storage vessel is replaced, any accessible <e2>pipes</e2> in the dwelling should be insulated.",none,annotated
+23db27ac-b594-4b26-883d-922d713d382a,"When installing or renovating thermal elements, the element being installed should be draught-proofed and airleakage gaps should be filled.",{'ID': '161_UK_DocM_V2_AccessAndUseOfBuildings'},"When <e1>installing</e1> or renovating <e2>thermal elements</e2>, the element being installed should be draught-proofed and airleakage gaps should be filled.",selection,annotated
+9618a274-45da-4e3e-87f0-21c2bfae4a8e_10,,,"A guardrail must be used at points with a <e1>number of appliances</e1> of over <e2>100 litres</e2>, if these can be accessed by children.",greater,synthetic
+5fa7daca-cb50-4397-a736-617e52d30187_10,,,"If efficiencies at below 30% are required and unavailable, the <e1>surface temperature</e1> may be taken as equal to that at <e2>20</e2>.",equal,synthetic
+0df5892a-e396-424e-90f1-74f6ccfb9e1a,"A certain proportion of the changing rooms, washing facilities, saunas and swimming pools in a non-residential building shall be suitable for a person with mobility and functional impairment.",{'ID': '61_Finnish_Accessibility'},"A <e1>certain proportion</e1> of the <e2>changing rooms</e2>, washing facilities, saunas and swimming pools in a non-residential building shall be suitable for a person with mobility and functional impairment.",part-of,annotated
+0096a3bf-ac16-4a75-adf9-8c3f4a9b8610_2,,,The smaller <e1>fire load</e1> of each panel which can be either the width or height of the panel should be <e2>2 metres</e2> or less.,less-equal,synthetic
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab_9,,,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the <e1>sales counter</e1> of that installation exceeds <e2>2.5 ties/m2</e2> of the total cost of the major renovation.",greater,synthetic
+009e12eb-db83-485c-9ffc-e1f462251109_4,,,Each air terminal should have a <e1>environment</e1> of at least <e2>0.35W/(m2K)</e2> of the free area of its associated duct.,greater-equal,synthetic
+db734798-9e42-4fe1-900c-77d4e6131809,"The main doors for entering a dwelling (usually the front door) should have a door viewer unless other means exist to see callers, such as clear glass within the door or a window next to the doorset.",{'ID': '11_UK_DocQ_Security_Dwellings'},"The <e1>main doors</e1> <e2>for entering a dwelling</e2> (usually the front door) should have a door viewer unless other means exist to see callers, such as clear glass within the door or a window next to the doorset.",selection,annotated
+86350df0-a40e-412b-a301-004524d56736_6,,,"For wet heating systems in new dwellings with a <e1>centre pane U-value</e1> of <e2>130 millimetres</e2> or greater, a minimum of two independently controlled heating circuits should be provided.",greater-equal,synthetic
+10b2bf58-18df-46ee-a766-ed11eec6f42b,"Humus soil, organic substances decomposing or rotting from moisture or building waste must not be left under new buildings, in their crawl spaces and in their gravel backfills functioning as a drainage layer.",{'ID': '45_Finnish_Health-Humidity'},"Humus soil, organic substances decomposing or rotting from moisture or <e1>building</e1> waste must <e2>not be left under new buildings, in their crawl spaces and in their gravel backfills functioning as a drainage layer</e2>.",none,annotated
+457ecdc0-8247-4ad4-9beb-3b7a31cfa0fd,"All public areas, including lavatory accommodation, public telephones and external terraces should be accessible.",{'ID': '138_UK_DocM_V2_AccessAndUseOfBuildings'},"All <e1>public areas</e1>, including lavatory accommodation, public telephones and external <e2>terraces</e2> should be accessible.",part-of,annotated
+4b510cad-fefb-44be-a9cb-a26e0c42994c,"If the building is connected to a heating system where heat is conveyed via heat pipes external to the building from a shared heat exchanger or heat generation unit to several buildings, the heat loss from those pipes shall be divided between the buildings in proportion to their areas.",{'ID': '101_Finnish_EnergyEfficiency'},"If the building is connected to a <e1>heating system</e1> where <e2>heat</e2> is conveyed via heat pipes external to the building from a shared heat exchanger or heat generation unit to several buildings, the heat loss from those pipes shall be divided between the buildings in proportion to their areas.",part-of,annotated
+46f5be2a-1514-420b-bc39-331fc6e0d2df_3,,,"The dwelling primary energy rate, dwelling emission rate and <e1>span</e1>, all calculated using the measured air permeability, must not be higher than the target primary energy rate, target emission rate and <e2>target emission rate</e2>, respectively.",less-equal,synthetic
+2b60007d-59a3-4a18-a184-89e76ee17454,Masonry construction: external or cavity wall insulation should extend below the damp-proof course (where applicable) and be at least the equivalent of one full block height (215mm) below the underside of the floor structure/slab and beyond the depth of the floor insulation.,{'ID': '161_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Masonry</e1> <e2>construction</e2>: external or cavity wall insulation should extend below the damp-proof course (where applicable) and be at least the equivalent of one full block height (215mm) below the underside of the floor structure/slab and beyond the depth of the floor insulation.,selection,annotated
+f6a682fb-f427-41d0-9219-3a45d2134be6,"To correctly assess whether an element meets the limiting U-value, the U-value must be calculated for the element in the appropriate plane - either horizontal or vertical.",{'ID': '109_UK_DocL_V1_ConsrvationOfFuelAndPower'},"To correctly assess whether an <e1>element</e1> <e2>meets the limiting U-value</e2>, the U-value must be calculated for the element in the appropriate plane - either horizontal or vertical.",selection,annotated
+7f3f59a4-fc7e-4b14-8074-384f6cacf548_0,,,"The height of a barrier in a dwellings indoor areas may, however, be at least 0.9 metres if the <e1>entry</e1> is less than <e2>2.2 metres</e2>.",less,synthetic
+99a53f17-48cb-4012-a47b-700761e0983b,Where a new building which is not a residential building or a mixed-use building has more than 10 parking spaces (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,{'ID': '61_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},Where a new building which is not a residential building or a mixed-use building has more than 10 parking spaces (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) <e1>cable routes</e1> for electric vehicle charge points must be <e2>installed in a minimum of one fifth of the total number of remaining parking spaces</e2>.,necessity,annotated
+f7f1a609-ae35-4544-9b38-e471d7a00666,"In order to enhance the efficiency of firefighting and rescue operations, means of smoke extraction shall be designed and constructed in the building so that smoke can be extracted from the different premises in the building.",{'ID': '249_Finnish_FireSafety'},"In order to enhance the efficiency of firefighting and rescue operations, <e1>means</e1> of <e2>smoke extraction</e2> shall be designed and constructed in the building so that smoke can be extracted from the different premises in the building.",selection,annotated
+3d0bbf85-327f-4f92-a468-201f81080779,The roof insulation should be installed when the eaves are still accessible.,{'ID': '169_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>roof</e1> <e2>insulation</e2> should be installed when the eaves are still accessible.,part-of,annotated
+46f5be2a-1514-420b-bc39-331fc6e0d2df_3,,,"The dwelling primary energy rate, <e1>Manual control</e1> and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the target primary energy rate, <e2>standards</e2> and target fabric energy efficiency rate, respectively.",less-equal,synthetic
+73a6e4e0-c157-4cae-bc28-c0788f6a1e53,"Activation (e.g. motion sensors and push buttons), safety features and the time-lapse allowed for entry and exit through powered door systems should be carefully considered to suit the needs of people who cannot react quickly.",{'ID': '73_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Activation</e1> (e.g. motion sensors and push buttons), safety features and the time-lapse allowed for entry and exit through powered door systems should be <e2>carefully considered to suit the needs of people who cannot react quickly</e2>.",necessity,annotated
+636bce88-fd3b-4e5a-9f6a-4aa0d3d1bfa4_0,,,"Where a new building contains more than <e1>One</e1> <e2>internal stairs</e2>, a common access point for a gigabit-capable public electronic communications network is required as a part of the buildings gigabit-ready physical infrastructure.",greater,synthetic
+77be05f2-cd8c-4d35-85e4-6637b999d8e7,The value of the consequential improvement works should not be less than 10 of the value of the principal works.,{'ID': '452_UK_DocM_V2_AccessAndUseOfBuildings'},The <e1>value</e1> of the consequential improvement works should not be less than <e2>10</e2> of the value of the principal works.,greater-equal,annotated
+ff3e8f86-1542-4f54-a776-cfdc8482bad7,The seasonal energy efficiency ratio of an air conditioner working in cooling mode should be a minimum of 4.0.,{'ID': '332_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>seasonal energy efficiency ratio</e1> of an <e2>air conditioner</e2> working in cooling mode should be a minimum of 4.0.,part-of,annotated
+ddc0bba6-2df8-43e1-9398-37514366fb06,"For fixed terminals with automatic flow adjustment at the fan unit, the fan speed should be set to achieve the desired continuous flow rate.",{'ID': '208_UK_DocF_V1_Ventilation'},"For fixed terminals with automatic flow adjustment at the fan unit, the fan <e1>speed</e1> should be <e2>set to achieve the desired continuous flow rate</e2>.",necessity,annotated
+29c431ee-ea93-491d-ab13-06418d93c488_4,,,"If <e1>service</e1> is greater than <e2>55</e2>, manual control is acceptable.",greater,synthetic
+0da52584-1b37-48b5-840f-3795ae695275_11,,,the minimum clear dimensions of the platform are: 1100mm wide and <e1>twice the rise plus the going (2R G)</e1> <e2>condition</e2> where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+835d8fad-7a27-4299-aa38-a5b1771a6779,"In large building complexes, such as retail parks and large sports centres, there should be one wheelchair-accessible unisex toilet capable of including an adult changing table.",{'ID': '178_UK_DocM_V2_AccessAndUseOfBuildings'},"In large building complexes, such as retail parks and large sports centres, there should be one wheelchair-accessible unisex <e1>toilet</e1> <e2>capable of including an adult changing table</e2>.",selection,annotated
+a4fccc69-c508-4405-92aa-2cfe36bfca39,Exits of parts of the building separated by a fire wall must be constructed separately so that in the event of a fire there is no need to use any door that may be in the fire wall.,{'ID': '209_Finnish_FireSafety'},<e1>Exits</e1> of parts of the <e2>building</e2> separated by a fire wall must be constructed separately so that in the event of a fire there is no need to use any door that may be in the fire wall.,none,annotated
+973c9430-2b4a-4ab4-82df-7060c3002f77_3,,,The <e1>riser</e1> for the community heating primary circuit should be a minimum of <e2>400kg</e2>.,greater-equal,synthetic
+f6add908-4d45-4b3e-83a6-369f6c36c037_9,,,"Door rails, stiles and muntins should be at least <e1>8 per cent (1:12.5)</e1> <e2>total cost</e2>.",greater-equal,synthetic
+4e119abd-0cf7-4c60-9c7b-1083f9b46280,"NOTE: If an exposed facade is close to an area of sustained and loud noise (e.g. a main road), then a noise attenuating background ventilator should be fitted.",{'ID': '85_UK_DocF_V2_Ventilation'},"NOTE: If an exposed facade is <e1>close to an area of sustained and loud noise (e.g. a main road)</e1>, then a noise attenuating <e2>background ventilator</e2> should be fitted.",necessity,annotated
+835d8fad-7a27-4299-aa38-a5b1771a6779_7,,,"In large building complexes, such as retail parks and large sports centres, there should be <e1>twice the rise plus the going (2R G)</e1> wheelchair-accessible unisex <e2>cooling appliance</e2> capable of including an adult changing table.",equal,synthetic
+3153d771-404e-4a54-ac05-ed1b75e37506_11,,,"Gangways should not be less than 1100mm <e1>shallow projecting</e1> unless used by not more than 50 persons, in which case gangways should be a minimum of <e2>three</e2>.",greater-equal,synthetic
+2be01bf1-2cd9-4982-8778-ba0afe835580,"If fans and background ventilators are fitted in the same room, they should be at least 500mm apart.",{'ID': '88_UK_DocF_V1_Ventilation'},"If <e1>fans</e1> and background ventilators are fitted in the <e2>same</e2> room, they should be at least 500mm apart.",none,annotated
+f2bf62e6-9577-48b5-b15d-9fe4904acf52,"Where controls are integrated in the heater, the system should be provided with a time switch/programmer and room temperature sensor linked to heater firing and fan speed control.",{'ID': '268_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where <e1>controls</e1> are <e2>integrated in the heater</e2>, the system should be provided with a time switch/programmer and room temperature sensor linked to heater firing and fan speed control.",selection,annotated
+7d877df3-9aa7-4dff-a64d-5356a66c944d_0,,,"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a <e1>design value</e1> exceeding <e2>650mm</e2> and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",greater,synthetic
+7c44934c-61e1-4904-a493-1aa360ccc7d1,"The building shall be constructed so that the combined dead,imposed and wind loads are sustained and transmitted by it to the ground: (a) safely; and (b) without causing such deflection or deformation of any part of the building, or such movement of the ground, as will impair the stability of any part of another building.",{'ID': '1_UK_DocA_Structure'},"The building shall be constructed so that the combined dead,imposed and wind loads are sustained and <e1>transmitted by it to the ground</e1>: (a) <e2>safely</e2>; and (b) without causing such deflection or deformation of any part of the building, or such movement of the ground, as will impair the stability of any part of another building.",selection,annotated
+536b172d-ccd1-479a-8136-6ee05db0f264,"Where pipework is above ground, the performance of the pipe insulation should be at least as high as the insulating performance of pipework in the buried part of the system.",{'ID': '205_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where pipework is above ground, the performance of the pipe insulation should be at least as high as the insulating performance of <e1>pipework</e1> in the buried part of the <e2>system</e2>.",none,annotated
+75c60084-6878-472d-8694-e8739e0dd76c_8,,,The width of access routes in assembly areas with a <e1>product certificate</e1> of <e2>100 litres</e2> must be at least 900 millimetres.,equal,synthetic
+bb9ec292-062b-43c3-8590-856dd5f6b890_7,,,"The <e1>natural light</e1> and building emission rate calculated using the measured air permeability must not be higher than the <e2>efficiencies</e2> and target emission rate, respectively.",less-equal,synthetic
+d728a9c8-0302-4bd1-b69b-0daeefce30d1,"Where a service building has a reception or sales counter, there should be convenient access to it and part of it should be at a level suitable for a wheelchair user or a seated person.",{'ID': '84_UK_DocM_V2_AccessAndUseOfBuildings'},"Where a <e1>service building</e1> has a <e2>reception</e2> or sales counter, there should be convenient access to it and part of it should be at a level suitable for a wheelchair user or a seated person.",part-of,annotated
+2f815a08-db3c-48a6-b248-d69aeac870ee_0,,,"the vertical <e1>constraints</e1> is: a. not more than <e2>1800mm</e2>, where there is no liftway enclosure and no floor penetration; b. more than 2m, where there is a liftway enclosure.",less-equal,synthetic
+7d35f4c4-fa65-4d68-a974-f54386ca8aee_8,,,"However, a horizontal <e1>strategy</e1> in a protective part must be no higher than <e2>50mm</e2>.",less-equal,synthetic
+4470dde4-6422-4c13-9781-de68c3e075dc,"The outdoor air flow of a dwelling unit, however, shall be designed to be a minimum of 18 dm3/s.",{'ID': '54_Finnish_Health-IndoorClimateAndVentilation'},"The outdoor <e1>air flow</e1> of a dwelling unit, however, shall be designed to be a minimum of <e2>18 dm3/s</e2>.",greater-equal,annotated
+3ec9d4e7-3526-411c-8b30-0c7671660ed1,"The relationship between the kitchen, dining and living areas should be convenient and step-free.",{'ID': '91_UK_DocM_V1_AccessAndUseOfBuildings'},"The <e1>relationship</e1> between the kitchen, dining and living areas should be convenient and <e2>step-free</e2>.",necessity,annotated
+19478a13-7457-4dd3-a394-744f826db7b0_7,,,"The handle to at least <e1>30</e1> <e2>driveways</e2> in the principal living area is 700-1000mm above floor level, unless fitted with a remote opening device that is within this height range.",greater-equal,synthetic
+eeb4239f-3819-475c-ad20-756bed80c4ff_1,,,"In reference heat loss calculations, the value used as the <e1>dimension</e1> of the buildings ventilation system shall be <e2>190 kN</e2>.",equal,synthetic
+0f67dad7-6df9-444b-8e72-f447668e3fde_0,,,"Where sanitary facilities are wheelchair accessible, WC pans should be a minimum of <e1>two </e1> <e2>reception</e2>.",greater-equal,synthetic
+511c1a7f-08b9-48ec-aea6-9b749fdf31a1_4,,,"A non-residential building shall, considering the intended use and functional units of the building and distances in the building, have an <e1>300mm</e1> of appropriately located <e2>living quarters</e2> which are suitable for users of wheelchairs and walking frames with wheels.",equal,synthetic
+bfc84a1d-db59-4f4a-bd93-3d5f1043d11e,A notice of the measured air flow rates must be given to the building control body.,{'ID': '183_UK_DocF_V1_Ventilation'},A <e1>notice</e1> of the measured air flow rates must be <e2>given to the building control body</e2>.,necessity,annotated
+0aaf71f0-a482-4a72-a407-0d6db79c7f6f,"In a building consisting primarily of one storey, no more than 200 m2 of fire-compartmented and no more than 50 m2 of non-fire-compartmented areas that essentially relate to the business of the building may be located on the level of second storey.",{'ID': '69_Finnish_FireSafety'},"In a building <e1>consisting primarily of one storey</e1>, no more than <e2>200 m2</e2> of fire-compartmented and no more than 50 m2 of non-fire-compartmented areas that essentially relate to the business of the building may be located on the level of second storey.",none,annotated
+eeb4239f-3819-475c-ad20-756bed80c4ff_10,,,"In reference heat loss calculations, the value used as the <e1>presence</e1> of the buildings ventilation system shall be <e2>300 litres</e2>.",equal,synthetic
+c0a6d35c-cc20-428b-941d-c3e3e6365c74,"In a tier that is uninterrupted by cross-gangways, and where the pitch exceeds 25, use a maximum number of steps of 40.",{'ID': '25_UK_DocK_ProtectionFromFalling'},"In a tier that is uninterrupted by cross-gangways, and where the <e1>pitch</e1> exceeds 25, use a maximum <e2>number</e2> of steps of 40.",none,annotated
+bfdf95da-d422-47cd-83d7-a30a4969f2e6,"If the internal ties must be centred on the supporting line, the minimum value of the tie force, 10 kN, will also be applied to internal ties.",{'ID': '180_Finnish_StabilityOfStructures'},"If the internal ties must be <e1>centred on the supporting line</e1>, the minimum value of the tie force, 10 kN, will also be applied to internal <e2>ties</e2>.",none,annotated
+5e7d4831-4ec8-48f9-9e60-0422fcc1eae4,"When replacing an existing system, the installed generation capacity of the new system should be no less than that of the existing system, except where a smaller system can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",{'ID': '344_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When replacing an existing system, the installed generation capacity of the new system should be no less than that of the existing system, except where a <e1>smaller</e1> <e2>system</e2> can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",selection,annotated
+56517433-cf40-4b88-a9d4-18e61e0e9993_7,,,"In addition, on both sides of the toilet seat there shall be a <e1>terminals</e1> of at least <e2>0.7</e2>.",greater-equal,synthetic
+c0a6d35c-cc20-428b-941d-c3e3e6365c74_11,,,"In a tier that is uninterrupted by cross-gangways, and where the pitch exceeds 25, use a <e1>commissioned in accordance with an approved procedure</e1> number of steps of <e2>900 millimetres</e2>.",equal,synthetic
+05fdde92-d8af-42ad-963b-9019c69a8ab3_3,,,"For a timber frame where the intermediate floor structure breaches the external wall insulation, further insulation of the same <e1>fire resistance time requirement</e1> as the <e2>Frames</e2> used in the external wall should be included within the depth of the intermediate floor structure.",equal,synthetic
+a235c68f-ae44-4770-b005-4e9d7b659eb7_7,,,All cavity walls should have leaves at least 90mm thick and cavities at least <e1>0.3W/m2</e1> <e2>power input from controls</e2>.,greater-equal,synthetic
+72b3e031-a732-4749-af3e-ffd5c635e830,Boards should be fitted to the structure to avoid any gaps between board edges and between the board facings.,{'ID': '145_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Boards</e1> should be <e2>fitted to the structure</e2> to avoid any gaps between board edges and between the board facings.,necessity,annotated
+259c1614-77ef-4ae4-a401-83caa603e374,"The main doors for entering a dwelling (usually the front doorset) should be fitted with a multipoint locking system that meets the requirements of: PAS 3621 (key locking on both sides), or PAS 8621 (non-key locking on the internal face), or PAS 10621 (non-key locking on the internal face, but with an external locking override facility).",{'ID': '35_UK_DocQ_Security_Dwellings'},"The main doors for entering a dwelling (usually the front doorset) should be fitted with a <e1>multipoint locking system</e1> that meets the requirements of: PAS 3621 (key locking on both sides), or <e2>PAS 8621 (non-key locking on the internal face)</e2>, or PAS 10621 (non-key locking on the internal face, but with an external locking override facility).",selection,annotated
+5fe7997a-7e99-485c-89b3-7912d7c8d44d,"If the total flow rate cannot be achieved through all the terminals, then the fan speed should be increased.",{'ID': '199_UK_DocF_V1_Ventilation'},"If the total flow rate cannot be achieved through all the terminals, then the fan <e1>speed</e1> should be <e2>increased</e2>.",necessity,annotated
+07336e23-ffc0-4625-9dca-73c1eb5808c7,Purge ventilation should be capable of extracting at least four air changes per hour per room directly to the outside.,{'ID': '47_UK_DocF_V1_Ventilation'},<e1>Purge ventilation</e1> should be <e2>capable of extracting at least four air changes per hour per room directly to the outside</e2>.,necessity,annotated
+fb5d3054-4911-4049-ba09-1c3e80f9c07c_7,,,"The tread of steps in uncovered or unheated outdoor staircases must be no less than 390 millimetres, and the <e1>opening</e1> may be no more than <e2>270 millimetres</e2>.",less-equal,synthetic
+36650de0-ef3c-4fd1-8199-f47c0e576076_10,,,the <e1>results</e1> of the platform does not exceed <e2>E</e2>.,less-equal,synthetic
+ee0c8c7c-c65e-4403-92e6-628fd680f3bf_9,,,Any panel within the doorset should be at least <e1>15</e1> <e2>protection</e2>.,greater-equal,synthetic
+4470dde4-6422-4c13-9781-de68c3e075dc_6,,,"The outdoor <e1>agreed level of provision</e1> of a dwelling unit, however, shall be designed to be a minimum of <e2>6m</e2>.",greater-equal,synthetic
+0da52584-1b37-48b5-840f-3795ae695275,the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,{'ID': '119_UK_DocM_V2_AccessAndUseOfBuildings'},the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is <e1>enclosed</e1> or where <e2>provision</e2> is being made for an accompanied wheelchair user.,none,annotated
+5fa7daca-cb50-4397-a736-617e52d30187_8,,,"If <e1>operation</e1> at below 30% are required and unavailable, the <e2>away</e2> may be taken as equal to that at 30% load.",equal,synthetic
+f5a71c7b-e852-40f2-8f88-91cda7902a7e,"If a new building has a space heating or airconditioning system with an effective rated output greater than 180kW, a building automation and control system should be installed.",{'ID': '319_UK_DocM_V2_AccessAndUseOfBuildings'},"If a new building has a <e1>space heating or airconditioning system</e1> with an effective rated output greater than 180kW, a <e2>building automation and control system</e2> should be installed.",none,annotated
+ef561e39-db90-462c-8dde-15fbeae954e5_3,,,A cube with <e1>entry</e1> of no more than <e2>1000m2</e2> may pass between the upper edge of the barrier and the protective part.,less-equal,synthetic
+5b1fe636-d2aa-4382-885e-a4f8a2cae4d4_3,,,"Generally, a thermal element once upgraded should not have a <e1>Control</e1> greater than <e2>25 decibels</e2>.",less-equal,synthetic
+60024014-cb6a-4a53-9b12-9497e0a1e5e8,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",{'ID': '85_Finnish_Health-IndoorClimateAndVentilation'},"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the total extract air flow from these spaces does not exceed 10 of the <e1>total air flow</e1> in the vertical <e2>duct</e2>.",part-of,annotated
+9415ae4b-7a74-4c70-a245-e4381c6d71bf,"At gables and party walls, insulation should extend to the wall; if the space between the wall and joist is less than 100mm, perimeter insulation may be required.",{'ID': '170_UK_DocL_V1_ConsrvationOfFuelAndPower'},"At gables and party walls, insulation should <e1>extend to the wall</e1>; if the space between the wall and joist is less than 100mm, <e2>perimeter insulation</e2> may be required.",none,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",{'ID': '85_Finnish_Health-IndoorClimateAndVentilation'},"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories <e1>1</e1> and 2 if the total extract air flow from these spaces does not exceed <e2>10</e2> of the total air flow in the vertical duct.",none,annotated
+45b99da0-5bce-49b7-9ce2-04810c7e5a19,"For recessed meter boxes on the cold side of the construction, insulation should be installed behind the enclosure.",{'ID': '151_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For <e1>recessed</e1> <e2>meter boxes</e2> on the cold side of the construction, insulation should be installed behind the enclosure.",selection,annotated
+ef4ec541-e1a7-47d4-9a83-94715d8900ba,"Where one or more parking spaces are within a covered car park, the requirement to install electric vehicle charge points should be met by installing charge points in parking spaces that are not within a covered car park.",{'ID': '89_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where one or more <e1>parking spaces</e1> are within a covered <e2>car park</e2>, the requirement to install electric vehicle charge points should be met by installing charge points in parking spaces that are not within a covered car park.",part-of,annotated
+74002ed3-548e-4e2f-8835-be76e643c67d,NOTE 2: Double doors effectively provide nibs where each leaf is at least 300mm wide.,{'ID': '51_UK_DocM_V1_AccessAndUseOfBuildings'},NOTE 2: Double doors effectively provide nibs where each <e1>leaf</e1> is at least 300mm <e2>wide</e2>.,part-of,annotated
+2afa8bba-b5ad-4e12-bc27-4beea3fd09b2_10,,,The normal relationship between the <e1>spread of fire</e1> of the rise and going is: <e2>0.136kgCO2/kWh</e2> equals between 550mm and 700mm.,equal,synthetic
+0365837b-a04d-4aaf-a2f5-2e89403a9c2b,"If all the terminals have to be set to a significantly closed position to achieve the required air flow rate, then the fan speed should be reduced and the terminals rebalanced.",{'ID': '200_UK_DocF_V1_Ventilation'},"If all the terminals have to be <e1>set to a significantly closed position to achieve the required air flow rate</e1>, then the fan speed should be <e2>reduced</e2> and the terminals rebalanced.",none,annotated
+203faa23-7b71-47c9-a6e5-2333ac45389e_2,,,"The <e1>control capabilities</e1> of the indoor steps of dwelling units and living quarters may be no more than <e2>0.7W/(m2K)</e2>, and the tread must be no less than 250 millimetres.",less-equal,synthetic
+a1f91cfd-21f8-49a4-8468-746f49f4848e,"For a building that contains more than one dwelling for example a block of flats or a terrace of houses an average target primary energy rate, target emission rate and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",{'ID': '50_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For a building that contains more than <e1>one</e1> <e2>dwelling</e2> for example a block of flats or a terrace of houses an average target primary energy rate, target emission rate and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",greater,annotated
+8e8f4fb5-00b5-404f-89df-a07287984748_8,,,"In buildings with a <e1>reference value</e1> greater than <e2>1800mm</e2>, automatic meter reading and data collection facilities should be installed.",greater,synthetic
+84cd76d7-e5d0-4f39-94bc-0236c65d533a,"in residential buildings of not more than two storeys, one exit of no less than 900 millimetres in width is permitted.",{'ID': '217_Finnish_FireSafety'},"in residential buildings of not more than two storeys, one <e1>exit</e1> of no less than <e2>900 millimetres</e2> in width is permitted.",none,annotated
+7f72632a-dc0a-4318-afd7-7090b42350fc,Mechanical supply terminals should be located and directed to avoid draughts.,{'ID': '106_UK_DocF_V1_Ventilation'},Mechanical supply terminals should be <e1>located</e1> and directed to <e2>avoid draughts</e2>.,selection,annotated
+405a2082-beb9-4c5f-bc9f-d688b72e723b,Intermediate floors: floor-to-wall junctions should be detailed to ensure that insulation in the external wall is continuous.,{'ID': '162_UK_DocL_V1_ConsrvationOfFuelAndPower'},Intermediate <e1>floors</e1>: floor-to-wall junctions should be <e2>detailed to ensure that insulation in the external wall is continuous</e2>.,none,annotated
+208b093d-361f-4aec-819d-4abca4e72c68_10,,,"in an evacuation area where the <e1>fire resistance time requirement</e1> is <e2>01:08:00</e2>, the second exit may be no less than 900 millimetres in width.",equal,synthetic
+54da8684-242a-4a73-8ce5-ee908a038299,"Corridors and passageways should be wide enough to allow people with buggies, people carrying cases or people on crutches to pass others on the access route.",{'ID': '96_UK_DocM_V2_AccessAndUseOfBuildings'},"Corridors and <e1>passageways</e1> should be <e2>wide enough to allow people with buggies, people carrying cases or people on crutches to pass others on the access route</e2>.",necessity,annotated
+6d9a1e8e-6fe7-4234-951a-96fdc4598bd7_4,,,"If parking spaces are provided for a building, an adequate number of <e1>cabinet</e1>, but at least <e2>18 dm3/s</e2>, shall be intended for the use of a person with mobility and functional impairment.",greater-equal,synthetic
+eefe1191-2903-4fb8-9138-6471e09fb67d_6,,,The <e1>automatic flow adjustment</e1> exceeds <e2>half</e2> at 11pm.,greater,synthetic
+825053cb-af5d-43a9-b59b-e2a5ae78ea73_7,,,The <e1>air-tightness</e1> of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the number of dwellings in the residential building; b. the <e2>widened</e2> of associated parking spaces.,greater,synthetic
+9415ae4b-7a74-4c70-a245-e4381c6d71bf_11,,,"At gables and party walls, insulation should extend to the wall; if the <e1>bars</e1> between the wall and joist is less than <e2>2m</e2>, perimeter insulation may be required.",less,synthetic
+ebc429f0-cb90-41ab-9a11-401a2ddc7bad,"For continuous mechanical ventilation systems, such as continuous mechanical extract ventilation or mechanical ventilation with heat recovery, the system should be balanced to achieve design air flow rates at each room terminal.",{'ID': '268_UK_DocF_V1_Ventilation'},"For <e1>continuous</e1> mechanical ventilation systems, such as continuous mechanical <e2>extract ventilation</e2> or mechanical ventilation with heat recovery, the system should be balanced to achieve design air flow rates at each room terminal.",none,annotated
+99a53f17-48cb-4012-a47b-700761e0983b_3,,,Where a new building which is not a residential building or a mixed-use building has more than <e1>600 millimetres</e1> <e2>fittings</e2> (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,greater,synthetic
+baee716c-b8c2-4500-b4de-63fa11f007b1_5,,,A minimum of one in <e1>0.2</e1> of the remaining <e2>floor</e2> must have access to cable routes.,equal,synthetic
+5ba5ffe7-ece8-488a-b461-da66237e7888,"All walls, ducts and boxings to the WC/cloakroom, bathroom and shower room should be strong enough to support grab rails, seats and other adaptations that could impose a load of up to 1.5kN/m2.",{'ID': '54_UK_DocM_V1_AccessAndUseOfBuildings'},"All walls, ducts and <e1>boxings</e1> to the WC/cloakroom, bathroom and shower room should be <e2>strong enough to support grab rails, seats and other adaptations that could impose a load of up to 1.5kN/m2</e2>.",necessity,annotated
+e40e66a5-25da-494b-b09c-e3241289a1b7,All other bedrooms should be accessible to a wheelchair user.,{'ID': '101_UK_DocM_V1_AccessAndUseOfBuildings'},All <e1>other</e1> <e2>bedrooms</e2> should be accessible to a wheelchair user.,selection,annotated
+fa90c179-d32c-412b-a7d6-a515cc91dbdb,The structure of the exterior wall against the ground must be waterproofed or isolated against water pressure or a structurally managed water removal system allowing the cellar wall to dry in an outward direction must be used to prevent moisture from the surrounding ground and storm water from penetrating the wall structure.,{'ID': '86_Finnish_Health-Humidity'},The structure of the exterior wall against the ground must be waterproofed or isolated against water pressure or a structurally managed <e1>water removal system</e1> allowing the cellar wall to dry in an outward direction must be used to <e2>prevent moisture from the surrounding ground and storm water from penetrating the wall structure</e2>.,necessity,annotated
+783c19fa-0ef2-466f-b3e9-d4690e34ac5f,Where a system for onsite electricity generation is installed (a) reasonable provision must be made to ensure that (i) the system and its electrical output are appropriately sized for the site and available infrastructure; (ii) the system has effective controls; and (b) it must be commissioned by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.,{'ID': '214_UK_DocL_V1_ConsrvationOfFuelAndPower'},Where a system for onsite electricity generation is installed (a) reasonable provision must be made to ensure that (i) the system and its electrical output are appropriately sized for the site and available infrastructure; (ii) the system has <e1>effective</e1> <e2>controls</e2>; and (b) it must be commissioned by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.,selection,annotated
+53e31e26-a39b-4047-a86e-bdb8021413e8_2,,,Window handles on windows that open outwards are not more than <e1>100 litres</e1> <e2>target fabric energy efficiency rate</e2> when the window is at its maximum openable angle.,less-equal,synthetic
+10e66a84-25db-40a0-87d5-6297d0732fe4,The shutoff valves shall be located: 1) at each house; 2) at each apartment; 3) in vertical service pipes; 4) on both sides of devices installed in the service pipes; 5) before a device or fixture that is connected to the connector pipe;  6) on both sides of the water meters.,{'ID': '93_Finnish_Health-WaterAndSewerage'},The shutoff valves shall be located: 1) at each house; 2) at each apartment; 3) in vertical service pipes; 4) on <e1>both sides</e1> of devices installed in the service pipes; 5) before a device or fixture that is connected to the <e2>connector pipe</e2>; 6) on both sides of the water meters.,none,annotated
+5163f2fb-022f-4589-889f-2ade7a9d49c6,The relevant parts of Part 2 and 3 should be signed by a person who is competent to design the residential building.,{'ID': '109_UK_DocO_Overheating'},The <e1>relevant</e1> <e2>parts</e2> of Part 2 and 3 should be signed by a person who is competent to design the residential building.,selection,annotated
+d925c189-860a-4fcb-ae88-d1cf8cc14fb8_11,,,"The <e1>cross fall</e1> of steps in covered or heated outdoor staircases must be no less than <e2>5m</e2>, and the riser may be no more than 160 millimetres.",greater-equal,synthetic
+8151be81-09ad-4dac-b2d2-f0d757915b6c_7,,,"However, when the snow load can occur, the <e1>maximum number of occupants</e1> of the load s should be at least <e2>8.5m2</e2>.",greater-equal,synthetic
+8cef7dc5-2d76-4dd8-80c5-6861b11a8f6f,"Where the work concerns a building containing more than one dwelling, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",{'ID': '3_UK_DocR_V1_InfrastructureForElectircalCommunications'},"Where the work concerns a building containing more than <e1>one</e1> dwelling, the <e2>work</e2> must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",none,annotated
+2f8d4247-e53b-49ae-bd26-c4f1765eaee8_1,,,"Extract air of <e1>flow rate</e1> 2, 3 and <e2>half a metre</e2> shall not be used as recirculation air.",equal,synthetic
+d0927095-9e43-4ce4-a740-d5df69dc1dc3,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",{'ID': '84_Finnish_Health-IndoorClimateAndVentilation'},"If the air flows of extract air categories 1 and 2 are combined into the same duct and <e1>category</e1> 2 <e2>air flow</e2> accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",part-of,annotated
+7d877df3-9aa7-4dff-a64d-5356a66c944d,"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a width exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",{'ID': '59_Finnish_SafetyOfUse'},"In public outdoor and indoor spaces, and in business and service premises, a <e1>handrail</e1> must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or <e2>ramps</e2> that have a width exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",selection,annotated
+d3fc8c9b-c23a-4188-8723-369caa90453c_0,,,"The <e1>going</e1> for a building's total combined window area is <e2>1m2</e2> of the sum total of the floor plate areas of the buildings storeys that are fully or in part above the ground but, however, at most 50 of the building's facade area.",equal,synthetic
+4e8c5c50-44af-48f6-b959-e6f9b31afa1e_6,,,"If the planned time of use of a modular or portable building in a single location is less than two years, the only practical <e1>Supply temperature control</e1> may be <e2>casings</e2>.",equal,synthetic
+f420ae57-5656-4558-b1a3-1079e46bf6cc_8,,,"In the case of the storey-level door of a dwelling, or if the <e1>floor area</e1> through the door exceeds <e2>120</e2>, doors must open in the direction of the exit.",greater,synthetic
+45adb0b6-63ee-4f42-b6a3-8fc396221c67_5,,,The <e1>air leakage rate figure</e1> of the insulation plus any required air gap should be at least to the <e2>ventilation</e2> of the rafters.,greater-equal,synthetic
+a0c838b5-5fe2-4b52-abe1-432804c2c8aa_4,,,A <e1>service life</e1> of 21 C shall be used as the <e2>air flow rate</e2> for room temperature during the heating season.,equal,synthetic
+2ff58135-b89d-40d1-a145-51aad9e5a942_4,,,"The landing in front of the outside door shall be at least <e1>One</e1> <e2>air extract rate</e2> and at least 1,500 millimetres long.",greater-equal,synthetic
+01008f69-874b-443e-bcb2-2f5630280049_7,,,"If stairs are used only as an emergency exit and if they lead to spaces in a dwelling or accommodation facility other than those that are necessary for living, the <e1>standards</e1> may be no more than <e2>between 550mm and 700mm</e2> and the tread must be no less than 220 millimetres.",less-equal,synthetic
+8479a43c-e64a-4180-af62-7f4124c460b8,"An entrance door should be included, which should be shut all the time.",{'ID': '56_UK_DocO_Overheating'},"An <e1>entrance door</e1> should be included, which should be <e2>shut all the time</e2>.",necessity,annotated
+5b1fe636-d2aa-4382-885e-a4f8a2cae4d4_11,,,"Generally, a thermal element once upgraded should not have a <e1>vertical spacing</e1> greater than <e2>0.5 kN/m2</e2>.",less-equal,synthetic
+5577528f-8fa0-4ca3-96f6-ea418091cb86_6,,,The side edges of stairs and landings must be fitted with a raised camber to prevent slipping over the edge if a cube measuring more than <e1>B</e1> in <e2>illuminance</e2> is able to pass through the opening between the plane level and the handrail or wall.,greater,synthetic
+8101fa0e-645c-4a83-a6ab-66c45e94bf67,"If the dwelling already has mechanical ventilation, the centralised system could be extended into the additional room.",{'ID': '155_UK_DocF_V1_Ventilation'},"If the <e1>dwelling</e1> already has mechanical <e2>ventilation</e2>, the centralised system could be extended into the additional room.",part-of,annotated
+a9c88566-e4e5-4cba-8165-9916820d9cc5,"Doors, gates and boom barriers must operate safely and in such a way that they do not cause a danger of an accident.",{'ID': '75_Finnish_SafetyOfUse'},"<e1>Doors</e1>, gates and boom barriers must <e2>operate safely</e2> and in such a way that they do not cause a danger of an accident.",necessity,annotated
+50e89a86-e2be-439d-b230-79274cd7199b,Modular and portable buildings with a planned service life of more than two years at a single location should be shown to comply with the energy efficiency requirements.,{'ID': '81_UK_DocM_V2_AccessAndUseOfBuildings'},Modular and portable buildings with a planned <e1>service life</e1> of more than two years <e2>at a single location</e2> should be shown to comply with the energy efficiency requirements.,selection,annotated
+a5e9c36f-358f-4375-943c-6d5b89c82647,"Any abrupt level differences of over 0.7 metres and any precipices located in the vicinity of common play and recreation areas associated with buildings with more than two dwellings must be indicated by appropriate barriers or suitable planted areas, or outfitted with a base that cushions any fall.",{'ID': '92_Finnish_SafetyOfUse'},"Any abrupt level differences of over 0.7 metres and any precipices located in the vicinity of common play and <e1>recreation</e1> <e2>areas</e2> associated with buildings with more than two dwellings must be indicated by appropriate barriers or suitable planted areas, or outfitted with a base that cushions any fall.",selection,annotated
+4ec7b2ef-59e8-4ab1-9243-16587296b466,Fire must not spread in a roof or in its underlay in a way that causes a hazard.,{'ID': '179_Finnish_FireSafety'},Fire must <e1>not spread in a roof or in its underlay</e1> in a way that <e2>causes a hazard</e2>.,selection,annotated
+7f3f59a4-fc7e-4b14-8074-384f6cacf548_5,,,"The <e1>outputs</e1> of a barrier in a dwellings indoor areas may, however, be at least <e2>2.4 metres</e2> if the drop is less than three metres.",greater-equal,synthetic
+977ccb7b-4580-4ea3-9ea4-5057925c9854,"NOTE: The surface area of the whole building must be included when assessing whether the works constitute a major renovation, even if the building is mixed use.",{'ID': '124_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"NOTE: The <e1>surface area</e1> of the whole <e2>building</e2> must be included when assessing whether the works constitute a major renovation, even if the building is mixed use.",part-of,annotated
+c25a4595-d20d-40ed-bada-495abcfef307,"Background ventilators should be at least 1700mm above floor level, to reduce cold draughts, but still be easy for the occupant to reach.",{'ID': '64_UK_DocF_V1_Ventilation'},"<e1>Background ventilators</e1> should be at least 1700mm above floor level, to reduce cold draughts, but still be <e2>easy for the occupant to reach</e2>.",necessity,annotated
+88e23b46-22d9-4be6-87b7-40541f7995a9,"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the distance of the uppermost floor level from the entry level exceeds 24 metres; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",{'ID': '254_Finnish_FireSafety'},"A <e1>building</e1> shall be provided with a permanently installed dry riser that is <e2>suitable for its purpose for transporting water for fire extinguishing</e2>: 1) in the premises above the entry level of the building, when the distance of the uppermost floor level from the entry level exceeds 24 metres; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",none,annotated
+8cef7dc5-2d76-4dd8-80c5-6861b11a8f6f_5,,,"Where the work concerns a building containing more than <e1>0.05</e1> <e2>fire and service rescue equipment</e2>, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",greater,synthetic
+5ca6b3d3-fd21-4cc1-8dd8-185268db6615,The doorset should be manufactured from solid or laminated timber with a minimum density of 600kg/m3.,{'ID': '26_UK_DocQ_Security_Dwellings'},The doorset should be manufactured from solid or laminated <e1>timber</e1> with a minimum <e2>density</e2> of 600kg/m3.,part-of,annotated
+39a37d5e-3361-43b9-a209-e5cd45918abc,"For mixed-use buildings which have parking spaces within a covered car park, any requirements to install electric vehicle charge points or cable routes must first be applied to those parking spaces outside the covered car park.",{'ID': '95_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"For mixed-use buildings which have parking spaces within a covered car park, any <e1>requirements</e1> <e2>to install electric vehicle charge points or cable routes</e2> must first be applied to those parking spaces outside the covered car park.",selection,annotated
+015b966c-962b-4505-b742-21eaabe0240a,"Where there is a prevailing wind direction, exhaust outlets should be downwind of intakes.",{'ID': '130_UK_DocF_V1_Ventilation'},"Where there is a prevailing wind direction, <e1>exhaust outlets</e1> should be <e2>downwind of intakes</e2>.",necessity,annotated
+f7f1a609-ae35-4544-9b38-e471d7a00666,"In order to enhance the efficiency of firefighting and rescue operations, means of smoke extraction shall be designed and constructed in the building so that smoke can be extracted from the different premises in the building.",{'ID': '249_Finnish_FireSafety'},"In order to enhance the efficiency of <e1>firefighting and rescue operations</e1>, means of smoke extraction shall be <e2>designed and constructed</e2> in the building so that smoke can be extracted from the different premises in the building.",none,annotated
+3121fe90-27db-405e-a42a-df3cd22ee176_10,,,"Where necessary, <e1>0.35W/(m2K)</e1><e2>flights</e2>, one above the other, must be installed in order to take into account children and users of wheelchairs.",equal,synthetic
+fb1da22f-8ddb-4399-b441-64dca68da9af_0,,,"If a lift or other device for moving between levels is installed in the exit of an existing building, the dwellings exit may be no less than <e1>three seconds</e1> <e2>room temperature</e2>.",greater-equal,synthetic
+7e34700e-92de-4b00-a820-f4085a2e186c_11,,,"If the free gap between facing walls of adjacent glazed balconies or the <e1>depth</e1> of the wall to the window of an adjacent fire compartment is less than <e2>0.136kgCO2/kWh</e2>, the wall in question must be class EI 15.",less,synthetic
+c952db0f-b605-4335-8d56-97fc339ad5ba,All three parts of the installation and commissioning checklist should be completed.,{'ID': '262_UK_DocF_V1_Ventilation'},All <e1>three</e1> <e2>parts</e2> of the installation and commissioning checklist should be completed.,equal,annotated
+c06bb553-d8f1-47f5-ab33-cfdebb6bca52,"When a building undergoes a major renovation, the technical, environmental and economic feasibility of installing high-efficiency alternative systems should be considered.",{'ID': '117_UK_DocM_V2_AccessAndUseOfBuildings'},"When a building undergoes a major renovation, the technical, environmental and <e1>economic</e1> <e2>feasibility of installing high-efficiency alternative systems</e2> should be considered.",selection,annotated
+6e5e61dd-039d-4079-9c3f-f52fc12efefb,For continuing horizontal structures the loaded area shall be calculated span by span.,{'ID': '12_Finnish_StabilityOfStructures'},For <e1>continuing</e1> <e2>horizontal</e2> structures the loaded area shall be calculated span by span.,none,annotated
+6ec243f2-9294-4b7c-89a4-1c46e4a69cc9,"If site constraints necessitate an approach of 1:20 or steeper, an approach incorporating ramped access should be provided.",{'ID': '49_UK_DocM_V2_AccessAndUseOfBuildings'},"If site constraints necessitate an <e1>approach</e1> of <e2>1:20</e2> or steeper, an approach incorporating ramped access should be provided.",greater-equal,annotated
+511c1a7f-08b9-48ec-aea6-9b749fdf31a1_0,,,"A non-residential building shall, considering the intended use and functional units of the building and distances in the building, have an <e1>m3/(hm2) at 50Pa</e1> of appropriately located <e2>Structures</e2> which are suitable for users of wheelchairs and walking frames with wheels.",equal,synthetic
+8364a5f1-f80e-484c-9f38-bffc6f4c1876,"Where communal parking is provided to blocks of flats, at least one standard parking bay is provided close to the communal entrance of each core of the block (or to the lift core where the parking bay is internal).",{'ID': '44_UK_DocM_V1_AccessAndUseOfBuildings'},"Where communal <e1>parking</e1> is provided to <e2>blocks of flats</e2>, at least one standard parking bay is provided close to the communal entrance of each core of the block (or to the lift core where the parking bay is internal).",part-of,annotated
+0aaf71f0-a482-4a72-a407-0d6db79c7f6f_10,,,"In a building consisting primarily of one storey, no more than 200 m2 of fire-compartmented and no more than <e1>15mm</e1> of non-fire-compartmented <e2>data collection facilities</e2> that essentially relate to the business of the building may be located on the level of second storey.",less-equal,synthetic
+8c4a09c5-1eb2-4a41-86d9-b69c031b4592,Ground arrays including header pipes and manifolds should be flushed as one system to remove all debris and purged to remove all air.,{'ID': '384_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Ground arrays</e1> including header pipes and manifolds should be <e2>flushed as one system to remove all debris and purged to remove all air</e2>.,necessity,annotated
+2ca092ec-4425-4552-a389-fd0dadfbd154_5,,,NOTE: A floor level with a <e1>Signs</e1> of <e2>0.9 metres</e2> or steeper should be designed as a ramp.,greater-equal,synthetic
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_4,,,"The wall ties should have a horizontal spacing of 900mm and a <e1>span</e1> of <e2>800 millimetres</e2>, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",equal,synthetic
+c47598f9-df79-4d77-aba9-8f380342372f_1,,,"extract air of <e1>combined dead,imposed and wind loads</e1> <e2>40 degrees Celsius</e2> shall be conducted to the outdoors through individual extract air ducts.",equal,synthetic
+d9b8f957-49e3-45d0-83ca-c0419a50361a,"In a mechanical system, there shall be a clearly labelled stop switch, which shall be located in an easily accessible place.",{'ID': '48_Finnish_Health-IndoorClimateAndVentilation'},"In a mechanical system, there shall be a <e1>clearly labelled</e1> <e2>stop switch</e2>, which shall be located in an easily accessible place.",selection,annotated
+0cafda73-ee3a-4a99-a224-2d142de63618,"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",{'ID': '238_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be <e1>sized</e1> to <e2>allow the space heating system to operate effectively</e2> and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",selection,annotated
+cb522b91-f26f-460e-adee-1a7f59ba10c9,"For heat pump installations in which there are other heat sources available to the same building, each of these heat sources should be appropriately incorporated into a singular control system.",{'ID': '315_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For heat pump installations in which there are other <e1>heat sources</e1> available to the same building, each of these heat sources should be <e2>appropriately incorporated into a singular control system</e2>.",none,annotated
+01d924bf-4a69-4eb8-b05e-ce993aee3d45_0,,,Perimeter insulation should be continuous and have a minimum <e1>entry</e1> of <e2>500 millimetres</e2>.,greater-equal,synthetic
+b6e6ebce-e75f-4fae-b9a2-e35c164b3fb4,"Where onsite electricity generation and storage is installed, such as photovoltaic panels or battery storage, systems should be an appropriate size for the site, available infrastructure and onsite energy demand.",{'ID': '342_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where <e1>onsite electricity generation and storage</e1> is installed, such as photovoltaic panels or <e2>battery storage</e2>, systems should be an appropriate size for the site, available infrastructure and onsite energy demand.",selection,annotated
+f0c72b35-5a0a-4554-8713-96f6f73a67f1,A cube with edges of no more than 50 millimetres may pass between the lower edge of a barriers protective part and the landing or the upper surface or edge of a step.,{'ID': '51_Finnish_SafetyOfUse'},A <e1>cube</e1> with edges of no more than 50 millimetres may <e2>pass between the lower edge of a barriers protective part and the landing or the upper surface or edge of a step</e2>.,necessity,annotated
+53bb982d-5260-4a69-a6dd-71e4f074e676_7,,,The <e1>horizontal spacing</e1> of standing rows must be at least <e2>20 degrees Celsius</e2>.,greater-equal,synthetic
+ee0c8c7c-c65e-4403-92e6-628fd680f3bf,Any panel within the doorset should be at least 15mm thick.,{'ID': '30_UK_DocQ_Security_Dwellings'},Any <e1>panel</e1> within the <e2>doorset</e2> should be at least 15mm thick.,part-of,annotated
+b51c7a9f-2080-4e60-940f-e59af0cc97ce,"The buildings enclosure together with its construction layers and joints must form a whole, preventing the transfer of water across the surface of the enclosure into the construction by wind, slanting rain and wind pressure.",{'ID': '34_Finnish_Health-Humidity'},"The <e1>buildings</e1> enclosure together with its <e2>construction layers</e2> and joints must form a whole, preventing the transfer of water across the surface of the enclosure into the construction by wind, slanting rain and wind pressure.",none,annotated
+c0a6d35c-cc20-428b-941d-c3e3e6365c74_1,,,"In a tier that is uninterrupted by cross-gangways, and where the pitch exceeds 25, use a <e1>acoustically reflective</e1> number of steps of <e2>0.2</e2>.",equal,synthetic
+4a82f789-a98a-4379-9b81-2a20cfba6c87_8,,,"If the internal ties must be centred on the supporting line, the minimum value of the <e1>width</e1>, <e2>200 m2</e2>, will also be applied to internal ties.",greater-equal,synthetic
+4470dde4-6422-4c13-9781-de68c3e075dc_2,,,"The outdoor <e1>inaccuracies</e1> of a dwelling unit, however, shall be designed to be a minimum of <e2>two years</e2>.",greater-equal,synthetic
+a86b58e8-046f-44b7-8e1b-00c876c8c647_7,,,"Parapets in <e1>primary energy content</e1> A to <e2>400kg</e2> and panel parts of walls acting as parapets, as well as their fasteners, shall be designed to the concentrated load Qk = 0.3 kN acting on a random spot.",less-equal,synthetic
+13a437c0-918c-47f2-85bd-b80dd69eb027_3,,,"There are no <e1>planned time of use</e1> on the <e2>load EER</e2> of display windows and similar glazing, but for new buildings their impact must be taken into account in the calculation of primary energy and CO2 emissions.",not-part-of,synthetic
+c5c5365f-273f-4c29-8491-4f50aabc3b78,"Manual controls for powered entrance doors should be clearly distinguishable against the background and not located so that a person, having used the control, needs to move to avoid contact with the door as it opens.",{'ID': '74_UK_DocM_V2_AccessAndUseOfBuildings'},"Manual controls for <e1>powered</e1> <e2>entrance doors</e2> should be clearly distinguishable against the background and not located so that a person, having used the control, needs to move to avoid contact with the door as it opens.",selection,annotated
+fa8a6d84-eb99-490e-8169-3c65353fb553_10,,,"For large roofs, where the smaller horizontal dimension of the roof is 50 m or more, and the topography is windswept, the value of the <e1>structure</e1> shall be at least <e2>adequate number</e2>.",greater-equal,synthetic
+8e9ef8dc-18bd-4877-98cd-556aa4adee8f,"Reasonable provision shall be made for the conservation of fuel and power in buildings by: (a) limiting heat gains and losses (i) through thermal elements and other parts of the building fabric; and (ii) from pipes, ducts and vessels used for space heating, space cooling and hot water services; (b) providing fixed building services which (i) are energy efficient to a reasonable standard; (ii) have effective controls; and (iii) are commissioned by testing and adjusting as necessary to ensure they use no more fuel and power than is reasonable in the circumstances.",{'ID': '431_UK_DocM_V2_AccessAndUseOfBuildings'},"Reasonable provision shall be made for the conservation of fuel and power in buildings by: (a) <e1>limiting heat gains and losses</e1> (i) <e2>through thermal elements and other parts of the building fabric</e2>; and (ii) from pipes, ducts and vessels used for space heating, space cooling and hot water services; (b) providing fixed building services which (i) are energy efficient to a reasonable standard; (ii) have effective controls; and (iii) are commissioned by testing and adjusting as necessary to ensure they use no more fuel and power than is reasonable in the circumstances.",selection,annotated
+e1460729-0b58-4a44-99ac-dc150f918428,The cleanouts shall be located so that the entire pipeline may be cleansed.,{'ID': '158_Finnish_Health-WaterAndSewerage'},The cleanouts shall be <e1>located</e1> so that the <e2>entire pipeline may be cleansed</e2>.,selection,annotated
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab_9,,,"If the <e1>limits</e1> of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds <e2>A</e2> of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",greater,synthetic
+aaca648c-5f60-4300-a30f-887da252ebd0,The use of visually and acoustically reflective wall surfaces should be minimised within the lifting platform to prevent discomfort for people with visual and hearing impairment.,{'ID': '116_UK_DocM_V2_AccessAndUseOfBuildings'},The use of <e1>visually</e1> and acoustically reflective <e2>wall surfaces</e2> should be minimised within the lifting platform to prevent discomfort for people with visual and hearing impairment.,selection,annotated
+5b4380ba-0066-4735-a362-316d4c8e70b2,"Where a building undergoing major renovation, which is not a residential building or a mixeduse building, will have more than 10 parking spaces after the major renovation is completed (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.",{'ID': '73_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where a building undergoing major renovation, which is not a residential building or a mixeduse building, will have more than 10 parking spaces after the major renovation is completed (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) <e1>cable routes</e1> for <e2>electric vehicle charge points</e2> must be installed in a minimum of one fifth of the total number of remaining parking spaces.",part-of,annotated
+9fd15b82-fc32-4364-8724-f1ef14f0c047_6,,,The cooker hood should <e1>side</e1> at least the <e2>use</e2> of the cooker.,greater-equal,synthetic
+aaca648c-5f60-4300-a30f-887da252ebd0,The use of visually and acoustically reflective wall surfaces should be minimised within the lifting platform to prevent discomfort for people with visual and hearing impairment.,{'ID': '116_UK_DocM_V2_AccessAndUseOfBuildings'},The <e1>use</e1> of visually and acoustically reflective <e2>wall surfaces</e2> should be minimised within the lifting platform to prevent discomfort for people with visual and hearing impairment.,selection,annotated
+12f51746-1632-4628-9d8a-98dcf58ed9fc,Doors must be capable of opening outwards - in wheelchair adaptable bathrooms the door may open inwards providing that the door can be easily rehung to open outwards (e.g. door stops are planted and easily moved).,{'ID': '116_UK_DocM_V1_AccessAndUseOfBuildings'},Doors must be capable of opening outwards - in <e1>wheelchair adaptable</e1> <e2>bathrooms</e2> the door may open inwards providing that the door can be easily rehung to open outwards (e.g. door stops are planted and easily moved).,selection,annotated
+88e23b46-22d9-4be6-87b7-40541f7995a9,"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the distance of the uppermost floor level from the entry level exceeds 24 metres; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",{'ID': '254_Finnish_FireSafety'},"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the distance of the uppermost floor level from the entry level exceeds 24 metres; 2) in the <e1>premises</e1> below the entry level of the building, when the <e2>distance of the basement storey floor from the entry level</e2> exceeds 14 metres.",part-of,annotated
+316c89ee-aa42-4e7a-9372-960cf25b3265,Extract ventilation may be by natural means or by mechanical means (e.g. by an extract fan or acentral system).,{'ID': '105_UK_DocF_V2_Ventilation'},Extract ventilation may be by natural <e1>means</e1> or by mechanical means (e.g. by an <e2>extract fan</e2> or acentral system).,selection,annotated
+02f5e3fb-7a8b-4a88-a6e5-337cc0835284,"When a new residential building is erected, information about the building must be given to the owner of the building to allow them to use the overheating mitigation strategy effectively.",{'ID': '90_UK_DocO_Overheating'},"When a <e1>new</e1> residential building is erected, <e2>information</e2> about the building must be given to the owner of the building to allow them to use the overheating mitigation strategy effectively.",none,annotated
+ced8e4bc-84ed-467a-b41f-d933cff5bb0d,All evacuation areas must be designed in such a way that it is possible to transport an immobile individual on a stretcher via the exit route.,{'ID': '15_Finnish_SafetyOfUse'},All evacuation areas must be <e1>designed</e1> in such a way that it is <e2>possible to transport an immobile individual on a stretcher via the exit route</e2>.,selection,annotated
+57f7bbad-51b7-4627-8fe9-2d7a50289448,"Doors to the principal, or alternative accessible, entrance should be accessible to all, particularly wheelchair users and people with limited physical dexterity.",{'ID': '64_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Doors</e1> to the principal, or alternative accessible, entrance should be <e2>accessible to all, particularly wheelchair users and people with limited physical dexterity</e2>.",necessity,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",{'ID': '85_Finnish_Health-IndoorClimateAndVentilation'},"Extract air from toilets, <e1>washrooms</e1> and <e2>cleaning spaces</e2> may be conducted to vertical ducts for extract air categories 1 and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",none,annotated
+3153d771-404e-4a54-ac05-ed1b75e37506,"Gangways should not be less than 1100mm wide unless used by not more than 50 persons, in which case gangways should be a minimum of 900mm.",{'ID': '8_UK_DocK_ProtectionFromFalling'},"Gangways should not be less than 1100mm <e1>wide</e1> <e2>unless used by not more than 50 persons</e2>, in which case gangways should be a minimum of 900mm.",necessity,annotated
+05864826-21ef-4ae7-9af8-2aaeffc7267a_9,,,Modular and portable buildings with a planned <e1>target fabric energy efficiency rate</e1> of more than <e2>8 per cent (1:12.5)</e2> but with an intended time of use in a single location of less than two years should be shown to comply with the energy efficiency requirements.,greater,synthetic
+50e89a86-e2be-439d-b230-79274cd7199b_1,,,Modular and portable buildings with a planned <e1>CO2 emission factor</e1> of more than <e2>1.3 seconds</e2> at a single location should be shown to comply with the energy efficiency requirements.,greater,synthetic
+6075de3c-d339-4ba4-9945-990480975615_8,,,"Where a kitchen and living room accommodation are not separate rooms (i.e. open plan), no fewer than <e1>28 metres</e1> <e2>network distribution point</e2> of the same equivalent area as for other habitable rooms should be provided within the open-plan space.",greater-equal,synthetic
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77,Skirtings totalling up to 50mm total thickness and shallow projecting ducts or casings above 1800mm may be discounted when measuring clear width.,{'ID': '131_UK_DocM_V1_AccessAndUseOfBuildings'},<e1>Skirtings</e1> totalling up to 50mm total thickness and shallow projecting ducts or casings above 1800mm may be <e2>discounted when measuring clear width</e2>.,necessity,annotated
+ef4ec541-e1a7-47d4-9a83-94715d8900ba,"Where one or more parking spaces are within a covered car park, the requirement to install electric vehicle charge points should be met by installing charge points in parking spaces that are not within a covered car park.",{'ID': '89_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where <e1>one</e1> or more <e2>parking spaces</e2> are within a covered car park, the requirement to install electric vehicle charge points should be met by installing charge points in parking spaces that are not within a covered car park.",greater-equal,annotated
+0cafda73-ee3a-4a99-a224-2d142de63618,"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",{'ID': '238_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a wet heating system is either: a. newly installed b. fully replaced in an <e1>existing</e1> building, including the <e2>heating appliance</e2>, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",none,annotated
+8e7e4d9a-05b8-4512-91c5-e8dbb9488685,"At night, windows, patio doors and balcony doors should be modelled as closed.",{'ID': '55_UK_DocO_Overheating'},"<e1>At night</e1>, windows, patio doors and <e2>balcony doors</e2> should be modelled as closed.",selection,annotated
+29232335-402c-4ed9-af74-fd093ac22e28,The natural or mechanical ventilation system of a building shall be strong and its air-tightness shall be at least class B.,{'ID': '95_Finnish_Health-IndoorClimateAndVentilation'},The <e1>natural</e1> or mechanical <e2>ventilation system</e2> of a building shall be strong and its air-tightness shall be at least class B.,selection,annotated
+2afa8bba-b5ad-4e12-bc27-4beea3fd09b2_7,,,The normal relationship between the <e1>total capital cost</e1> of the rise and going is: <e2>270 millimetres</e2> equals between 550mm and 700mm.,equal,synthetic
+3724fd47-22f7-432c-81a2-1abcb95c7df2,"The total number of ventilators installed in a dwellings habitable rooms and kitchens should be no fewer than five, except in one bedroom properties, where there should be no fewer than four.",{'ID': '96_UK_DocF_V1_Ventilation'},"The total number of ventilators installed in a dwellings habitable rooms and kitchens should be no fewer than five, except in <e1>one</e1> <e2>bedroom</e2> properties, where there should be no fewer than four.",equal,annotated
+5869233a-4fc0-48bf-9007-2b0c9a169fef,"A building shall, if its size, number of storeys or an intended purpose of a premises within the building so requires, be divided into fire compartments in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",{'ID': '100_Finnish_FireSafety'},"A building shall, if its size, number of storeys or an intended purpose of a premises within the building so <e1>requires</e1>, be divided into fire compartments in order to restrict the spread of fire and smoke, to provide safe evacuation and to <e2>facilitate rescue and extinguishing measures</e2>.",none,annotated
+c384013b-c40f-4925-acbe-465e1ca5bc13_10,,,<e1>14 metres</e1> <e2>warning sign</e2> per detail should be recorded.,equal,synthetic
+8b054fa5-fa6b-40f8-996a-a6dfea855fc3_10,,,"The <e1>free gap</e1> between a door that opens onto a landing and the upper edge of the ramp or flight of stairs must be no less than <e2>B</e2> on the side wall and no less than 1,500 millimetres on the end wall.",greater-equal,synthetic
+984c252b-74f4-4d85-9080-1c8ae1851eca,"If performance requires thicker glass to be used, an equivalent window unit with standard thickness (6mm) glazing should be shown to meet the required standard.",{'ID': '113_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If performance requires thicker glass to be used, an <e1>equivalent</e1> window unit with standard thickness (6mm) glazing should be <e2>shown to meet the required standard</e2>.",none,annotated
+5ca184fa-e100-4f97-957d-e37ae944786f_11,,,The <e1>side edges</e1> of installing electric vehicle charge points and cable routes is not more than <e2>18 dm3/s</e2> of the total capital cost of the major renovation.,less-equal,synthetic
+3724fd47-22f7-432c-81a2-1abcb95c7df2_10,,,"The <e1>natural light</e1> installed in a dwellings habitable rooms and kitchens should be no fewer than <e2>10m</e2>, except in one bedroom properties, where there should be no fewer than four.",greater-equal,synthetic
+c1b2e39e-0bab-438c-8b35-c2b37e5cf93a,"Equipment should be designed, specified and installed with the aim of maximising its efficiency as installed.",{'ID': '233_UK_DocM_V2_AccessAndUseOfBuildings'},"Equipment should be <e1>designed</e1>, specified and <e2>installed with the aim of maximising its efficiency as installed</e2>.",none,annotated
+3c801d84-c59d-48ef-95b9-f711d22061d4,"The compartment should be fitted with support rails, and include a minimum activity space to accommodate people who use crutches, or otherwise have impaired leg movements.",{'ID': '167_UK_DocM_V2_AccessAndUseOfBuildings'},"The <e1>compartment</e1> should be <e2>fitted with support rails</e2>, and include a minimum activity space to accommodate people who use crutches, or otherwise have impaired leg movements.",necessity,annotated
+09b2a395-5293-4b7d-82d4-5312482d59e9_9,,,"Door entry controls, where provided, are mounted <e1>28 metres</e1> <e2>ventilation provision</e2> finished ground level, and at least 300mm away from any projecting corner.",equal,synthetic
+793cb939-b3d9-46eb-ae65-71a4d5c8031b_0,,,Where the parking is within the private curtilage of the dwelling (but not within a carport or garage) at least one space is a standard parking bay that can be <e1>clear width</e1> to <e2>4</e2>.,less-equal,synthetic
+e21fa967-934e-4a29-a66d-252fdbbf928f_6,,,"If the parasitic energy use is unknown, an <e1>absence</e1> of <e2>0.052083333</e2> should be made for any control system.",equal,synthetic
+10b2bf58-18df-46ee-a766-ed11eec6f42b,"Humus soil, organic substances decomposing or rotting from moisture or building waste must not be left under new buildings, in their crawl spaces and in their gravel backfills functioning as a drainage layer.",{'ID': '45_Finnish_Health-Humidity'},"Humus soil, organic substances decomposing or rotting from moisture or building <e1>waste</e1> must <e2>not be left under new buildings, in their crawl spaces and in their gravel backfills functioning as a drainage layer</e2>.",necessity,annotated
+05864826-21ef-4ae7-9af8-2aaeffc7267a_6,,,Modular and portable buildings with a planned <e1>thickness</e1> of more than <e2>190  millimetres</e2> but with an intended time of use in a single location of less than two years should be shown to comply with the energy efficiency requirements.,greater,synthetic
+c952db0f-b605-4335-8d56-97fc339ad5ba_2,,,All <e1>1800mm</e1> <e2>dwelling</e2> of the installation and commissioning checklist should be completed.,equal,synthetic
+7f3f59a4-fc7e-4b14-8074-384f6cacf548_6,,,"The <e1>dimensions</e1> of a barrier in a dwellings indoor areas may, however, be at least <e2>1</e2> if the drop is less than three metres.",greater-equal,synthetic
+fac44f87-4eb9-4f56-998c-74efa9512309,"If air barriers or vapour barriers have been used in the structure, the seams, edges and penetrations must be tight.",{'ID': '106_Finnish_Health-Humidity'},"If air barriers or vapour barriers have been used in the <e1>structure</e1>, the seams, <e2>edges</e2> and penetrations must be tight.",none,annotated
+d3fc8c9b-c23a-4188-8723-369caa90453c,"The reference value for a building's total combined window area is 15 of the sum total of the floor  plate areas  of  the  buildings  storeys that  are  fully  or in  part  above  the  ground  but, however, at most 50 of the building's facade area.",{'ID': '124_Finnish_EnergyEfficiency'},"The reference value for a building's total combined window area is 15 of the sum total of the floor plate areas of the buildings storeys that are fully or in part above the ground but, however, at most <e1>50</e1> of the building's <e2>facade area</e2>.",part-of,annotated
+ccc405a0-c6d6-4ace-ad70-e0cfe07cd1e3,"Stairs, ladders and ramps shall be so designed, constructed and installed as to be safe for people moving between different levels in or about the building.",{'ID': '14_UK_DocK_ProtectionFromFalling'},"Stairs, ladders and <e1>ramps</e1> shall be so <e2>designed, constructed and installed as to be safe for people moving between different levels in or about the building</e2>.",necessity,annotated
+50e89a86-e2be-439d-b230-79274cd7199b,Modular and portable buildings with a planned service life of more than two years at a single location should be shown to comply with the energy efficiency requirements.,{'ID': '81_UK_DocM_V2_AccessAndUseOfBuildings'},Modular and portable buildings with a <e1>planned</e1> <e2>service life</e2> of more than two years at a single location should be shown to comply with the energy efficiency requirements.,selection,annotated
+84cd76d7-e5d0-4f39-94bc-0236c65d533a,"in residential buildings of not more than two storeys, one exit of no less than 900 millimetres in width is permitted.",{'ID': '217_Finnish_FireSafety'},"in residential buildings of not more than two <e1>storeys</e1>, one exit of no less than <e2>900 millimetres</e2> in width is permitted.",none,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_6,,,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under <e1>glare and reflections</e1> <e2>1,200 millimetres</e2>.",equal,synthetic
+a477ee34-044e-443b-a95f-fbb1da913c38,"Changing places toilets, facilities designed for individuals with complex and multiple impairments who may require the assistance of up to two assistants, should be provided in addition to any wheelchair-accessible accommodation in separate-sex toilet washrooms, wheelchair-accessible unisex toileting facilities and baby changing facilities.",{'ID': '160_UK_DocM_V2_AccessAndUseOfBuildings'},"Changing places toilets, facilities designed for individuals with complex and multiple impairments who may require the assistance of up to two assistants, should be provided in addition to any wheelchair-accessible accommodation in <e1>separate-sex</e1> <e2>toilet</e2> washrooms, wheelchair-accessible unisex toileting facilities and baby changing facilities.",selection,annotated
+81f14fc1-af5d-45e8-8725-94d2510e4701_1,,,"A dwelling that is intended for service housing or supported housing of a person with mobility and functional impairment shall, irrespective of the number of storeys in the building, have a turning space with a <e1>either side</e1> of at least <e2>390 millimetres</e2> in the hallway and kitchen.",greater-equal,synthetic
+5ba5ffe7-ece8-488a-b461-da66237e7888,"All walls, ducts and boxings to the WC/cloakroom, bathroom and shower room should be strong enough to support grab rails, seats and other adaptations that could impose a load of up to 1.5kN/m2.",{'ID': '54_UK_DocM_V1_AccessAndUseOfBuildings'},"All walls, ducts and <e1>boxings</e1> to the WC/cloakroom, <e2>bathroom</e2> and shower room should be strong enough to support grab rails, seats and other adaptations that could impose a load of up to 1.5kN/m2.",part-of,annotated
+c06bb553-d8f1-47f5-ab33-cfdebb6bca52,"When a building undergoes a major renovation, the technical, environmental and economic feasibility of installing high-efficiency alternative systems should be considered.",{'ID': '117_UK_DocM_V2_AccessAndUseOfBuildings'},"When a <e1>building</e1> <e2>undergoes a major renovation</e2>, the technical, environmental and economic feasibility of installing high-efficiency alternative systems should be considered.",selection,annotated
+a1f91cfd-21f8-49a4-8468-746f49f4848e_1,,,"For a building that contains more than <e1>0.8 metres</e1> <e2>water system</e2> for example a block of flats or a terrace of houses an average target primary energy rate, target emission rate and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",greater,synthetic
+74002ed3-548e-4e2f-8835-be76e643c67d_7,,,NOTE 2: Double doors effectively provide nibs where each leaf is at least <e1>one per 100m2</e1> <e2>distance of the basement storey floor from the entry level</e2>.,greater-equal,synthetic
+1d10aa43-7650-46b1-83c3-867f212ab9c3,Background ventilators should meet the performance standards for both of the following: a. air flow from outside to inside the dwelling; b. air flow from inside the dwelling to outside.,{'ID': '58_UK_DocF_V1_Ventilation'},Background ventilators should meet the <e1>performance standards</e1> for both of the following: a. <e2>air flow</e2> from outside to inside the dwelling; b. air flow from inside the dwelling to outside.,part-of,annotated
+4fc3b5b1-a838-4429-b385-d8e80e6633eb_1,,,"In the absence of relevant harmonised European Standards, products with a <e1>dwelling emission rate</e1> exceeding <e2>two years</e2> must have a product certificate issued by a Notified Body.",greater,synthetic
+fb5d3054-4911-4049-ba09-1c3e80f9c07c_10,,,"The tread of steps in uncovered or unheated outdoor staircases must be no less than 390 millimetres, and the <e1>number of occupants</e1> may be no more than <e2>21 C</e2>.",less-equal,synthetic
+d34c0f60-8df0-4310-b5af-428c63225a6f,"After a period of non-use of at least eight hours, the water temperature may not exceed 24 degrees Celsius.",{'ID': '60_Finnish_Health-WaterAndSewerage'},"<e1>After a period of non-use of at least eight hours</e1>, the water <e2>temperature</e2> may not exceed 24 degrees Celsius.",selection,annotated
+bfe386ee-8c0b-41d4-9967-6e873edf7229,"Floors and foundations: insulation should be installed tight to the structure, without air gaps between insulation panels and at edges.",{'ID': '148_UK_DocL_V1_ConsrvationOfFuelAndPower'},"<e1>Floors</e1> and foundations: insulation should be installed tight to the structure, <e2>without air gaps between insulation panels and at edges</e2>.",none,annotated
+01d924bf-4a69-4eb8-b05e-ce993aee3d45_8,,,Perimeter insulation should be continuous and have a minimum <e1>anthracite figure</e1> of <e2>0.9 metres</e2>.,greater-equal,synthetic
+c3cfbf29-a95f-4453-a7de-a8f6e4ca2ea8,"If sand, sludge, grease, petrol, oil or other detrimental physical or chemical substances may end up in the sewerage system or network or in the environment, the sewerage system shall be equipped with a separator or treatment device.",{'ID': '152_Finnish_Health-WaterAndSewerage'},"If sand, sludge, grease, petrol, oil or other <e1>detrimental physical or chemical substances</e1> may <e2>end up in the sewerage system or network or in the environment</e2>, the sewerage system shall be equipped with a separator or treatment device.",selection,annotated
+8e9ef8dc-18bd-4877-98cd-556aa4adee8f,"Reasonable provision shall be made for the conservation of fuel and power in buildings by: (a) limiting heat gains and losses (i) through thermal elements and other parts of the building fabric; and (ii) from pipes, ducts and vessels used for space heating, space cooling and hot water services; (b) providing fixed building services which (i) are energy efficient to a reasonable standard; (ii) have effective controls; and (iii) are commissioned by testing and adjusting as necessary to ensure they use no more fuel and power than is reasonable in the circumstances.",{'ID': '431_UK_DocM_V2_AccessAndUseOfBuildings'},"Reasonable <e1>provision</e1> shall be made for the conservation of fuel and power in buildings by: (a) limiting heat gains and losses (i) through thermal elements and other parts of the building fabric; and (ii) from pipes, ducts and vessels used for space heating, space cooling and hot water services; (b) <e2>providing fixed building services</e2> which (i) are energy efficient to a reasonable standard; (ii) have effective controls; and (iii) are commissioned by testing and adjusting as necessary to ensure they use no more fuel and power than is reasonable in the circumstances.",selection,annotated
+6c789809-b1b8-429a-8fe2-8ce16f8a4b54,Air flows in the continuous working area of a parking garage for motor vehicles shall be designed so that the instantaneous carbon monoxide concentration does not exceed 7 mg/m3 (6 ppm).,{'ID': '62_Finnish_Health-IndoorClimateAndVentilation'},Air flows in the continuous working area of a parking garage for motor vehicles shall be <e1>designed</e1> so that the <e2>instantaneous carbon monoxide concentration</e2> does not exceed 7 mg/m3 (6 ppm).,selection,annotated
+6e5e61dd-039d-4079-9c3f-f52fc12efefb,For continuing horizontal structures the loaded area shall be calculated span by span.,{'ID': '12_Finnish_StabilityOfStructures'},For <e1>continuing</e1> horizontal <e2>structures</e2> the loaded area shall be calculated span by span.,selection,annotated
+e320322e-3aee-4167-ad19-a6c6cc41f597,The water system shall incorporate: 1) a pressure gauge; 2) thermometers in the water pipe of mixed domestic hot water from the water heater and in the domestic hot water ring duct to measure the temperature of return water; 3) throttling valves.,{'ID': '97_Finnish_Health-WaterAndSewerage'},The water system shall incorporate: 1) a pressure gauge; 2) thermometers in the water pipe of <e1>mixed domestic hot water</e1> from the water heater and in the domestic hot water ring duct to measure the temperature of return water; 3) <e2>throttling valves</e2>.,none,annotated
+328fb8e7-cae4-4465-b7a7-24f0d066d65a,"The results of all pressure tests on buildings, including any test failures, should be reported to the building control body.",{'ID': '360_UK_DocM_V2_AccessAndUseOfBuildings'},"The <e1>results</e1> of all <e2>pressure tests</e2> on buildings, including any test failures, should be reported to the building control body.",part-of,annotated
+31d635b2-1d32-49dd-a848-5b5acaf50128,"For existing dwellings, when installing a complete new or replacement system (e.g. replacing a heating system including the heating appliance, pipework and heat emitters), the energy performance of the whole system should be assessed.",{'ID': '407_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For <e1>existing</e1> dwellings, when installing a complete new or replacement system (e.g. replacing a heating system including the heating appliance, pipework and heat emitters), the <e2>energy performance</e2> of the whole system should be assessed.",none,annotated
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_8,,,"In buildings more than <e1>30</e1> and at most 28 metres in <e2>heating plant emission rate</e2>, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",greater,synthetic
+850d22c2-6ff0-4ab6-89e1-75368bad5aa6,Barriers on loading docks must not impede loading and unloading.,{'ID': '136_Finnish_SafetyOfUse'},<e1>Barriers</e1> on loading docks must <e2>not impede loading and unloading</e2>.,necessity,annotated
+bde1697a-20c9-4f15-a63c-5be323a058c1,Any connection of two or more air handling units to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,{'ID': '90_Finnish_Health-IndoorClimateAndVentilation'},Any connection of two or more air handling units to the same duct or chamber shall be designed so that the pressures of the rooms or the <e1>directions</e1> of <e2>air flow</e2> between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,part-of,annotated
+e505b13c-7b62-4857-aa2d-544dc986e9c0,"For dwellings, for external tapered steps and stairs that are part of the building the going of each step should be a minimum of 280mm.",{'ID': '18_UK_DocK_ProtectionFromFalling'},"For dwellings, for external tapered steps and stairs that are part of the building the going of <e1>each</e1> <e2>step</e2> should be a minimum of 280mm.",selection,annotated
+ef561e39-db90-462c-8dde-15fbeae954e5_9,,,A cube with <e1>standards</e1> of no more than <e2>0.055555556</e2> may pass between the upper edge of the barrier and the protective part.,less-equal,synthetic
+b4754f3a-0a30-40fd-9f90-2e3d9e30d2a6,Fixed building services must be commissioned to ensure that they use no more fuel and power than is reasonable in the circumstances.,{'ID': '371_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Fixed</e1> building services must be <e2>commissioned to ensure that they use no more fuel and power than is reasonable in the circumstances</e2>.,none,annotated
+710ef992-e187-4b1a-894b-e0e222f54359_0,,,"NOTE: For grid-supplied electricity, a <e1>number of people evacuating</e1> of <e2>90mm</e2> and primary energy factor of 1.501kWhPE/kWh should be used.",equal,synthetic
+eeb4239f-3819-475c-ad20-756bed80c4ff,"In reference heat loss calculations, the value used as the annual efficiency of heat recovery from ventilation extract air of the buildings ventilation system shall be 55.",{'ID': '151_Finnish_EnergyEfficiency'},"In reference heat loss calculations, the value used as the annual efficiency of heat recovery from ventilation extract air of the <e1>buildings</e1> <e2>ventilation system</e2> shall be 55.",part-of,annotated
+8364a5f1-f80e-484c-9f38-bffc6f4c1876_2,,,"Where communal parking is provided to blocks of flats, at least <e1>50</e1> standard <e2>pipework</e2> is provided close to the communal entrance of each core of the block (or to the lift core where the parking bay is internal).",greater-equal,synthetic
+64695439-3458-4d43-8e7b-a2ba75075cea,"There must be safe and easily accessible, uninterrupted access routes to any chimneys, ventilation equipment and other building equipment and structural elements that are located on the roof of the building and that must be accessed regularly.",{'ID': '124_Finnish_SafetyOfUse'},"There must be safe and easily accessible, uninterrupted access routes to any <e1>chimneys</e1>, <e2>ventilation equipment</e2> and other building equipment and structural elements that are located on the roof of the building and that must be accessed regularly.",none,annotated
+7d877df3-9aa7-4dff-a64d-5356a66c944d,"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a width exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",{'ID': '59_Finnish_SafetyOfUse'},"In public outdoor and indoor spaces, and in business and service <e1>premises</e1>, a <e2>handrail</e2> must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a width exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",necessity,annotated
+636bce88-fd3b-4e5a-9f6a-4aa0d3d1bfa4_8,,,"Where a new building contains more than <e1>adequate means</e1> <e2>ceilings</e2>, a common access point for a gigabit-capable public electronic communications network is required as a part of the buildings gigabit-ready physical infrastructure.",greater,synthetic
+a477ee34-044e-443b-a95f-fbb1da913c38,"Changing places toilets, facilities designed for individuals with complex and multiple impairments who may require the assistance of up to two assistants, should be provided in addition to any wheelchair-accessible accommodation in separate-sex toilet washrooms, wheelchair-accessible unisex toileting facilities and baby changing facilities.",{'ID': '160_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Changing places toilets</e1>, facilities designed for individuals with complex and multiple impairments who may require the assistance of up to two assistants, should be provided in addition to any <e2>wheelchair-accessible</e2> accommodation in separate-sex toilet washrooms, wheelchair-accessible unisex toileting facilities and baby changing facilities.",none,annotated
+3724fd47-22f7-432c-81a2-1abcb95c7df2_8,,,"The total number of ventilators installed in a dwellings habitable rooms and kitchens should be no fewer than five, except in <e1>adequate means</e1> <e2>foundations</e2> properties, where there should be no fewer than four.",equal,synthetic
+ad792658-a7d2-4d6e-9a21-c531bb02b521,To reduce the risks to the health of persons in buildings formaldehyde fumes given off by urea formaldehyde foams should not penetrate to the occupied parts of buildings to an extent which would give rise to an irritant concentration.,{'ID': '12_UK_DocD_ToxicSubstances'},<e1>To reduce the risks to the health of persons in buildings</e1> formaldehyde fumes given off by urea formaldehyde foams should <e2>not penetrate to the occupied parts of buildings to an extent which would give rise to an irritant concentration</e2>.,selection,annotated
+2ff58135-b89d-40d1-a145-51aad9e5a942_6,,,"The landing in front of the outside door shall be at least <e1>one</e1> <e2>number of storeys</e2> and at least 1,500 millimetres long.",greater-equal,synthetic
+f7935bb4-9e5f-4e91-bbf1-54e45c1ef24c_2,,,A building with a <e1>fire load</e1> exceeding <e2>280mm</e2> must be equipped with anchoring structures for safety lines.,greater,synthetic
+86831830-e7f0-4b90-aa27-dc0542b7ba4d_6,,,"If a residential block of flats does not have a lift, the stairs between floor levels must have natural light and at least <e1>1800mm</e1> <e2>step</e2>.",greater-equal,synthetic
+5577528f-8fa0-4ca3-96f6-ea418091cb86,The side edges of stairs and landings must be fitted with a raised camber to prevent slipping over the edge if a cube measuring more than 50 millimetres in width is able to pass through the opening between the plane level and the handrail or wall.,{'ID': '32_Finnish_SafetyOfUse'},The <e1>side edges</e1> of stairs and <e2>landings</e2> must be fitted with a raised camber to prevent slipping over the edge if a cube measuring more than 50 millimetres in width is able to pass through the opening between the plane level and the handrail or wall.,part-of,annotated
+825053cb-af5d-43a9-b59b-e2a5ae78ea73_3,,,The <e1>CO2</e1> of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the <e2>cold side</e2> of dwellings in the residential building; b. the number of associated parking spaces.,greater,synthetic
+2319724e-2fd4-463b-bb59-0972073dc55a,"Both before and after a newly constructed dwelling is built, a notice must be given to the building control body of the calculations.",{'ID': '44_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Both before and after a <e1>newly constructed</e1> <e2>dwelling</e2> is built, a notice must be given to the building control body of the calculations.",selection,annotated
+db734798-9e42-4fe1-900c-77d4e6131809,"The main doors for entering a dwelling (usually the front door) should have a door viewer unless other means exist to see callers, such as clear glass within the door or a window next to the doorset.",{'ID': '11_UK_DocQ_Security_Dwellings'},"The main doors for entering a dwelling (usually the front door) should have a door viewer unless <e1>other</e1> <e2>means</e2> exist to see callers, such as clear glass within the door or a window next to the doorset.",selection,annotated
+ba93ede4-473f-4c07-b439-3699580cbcbe,No individual flight has a rise of more than 1800mm between landings.,{'ID': '21_UK_DocM_V1_AccessAndUseOfBuildings'},No individual flight has a <e1>rise</e1> of more than 1800mm <e2>between landings</e2>.,selection,annotated
+0da52584-1b37-48b5-840f-3795ae695275_4,,,the minimum clear dimensions of the platform are: 1100mm wide and <e1>70 kN</e1> <e2>constraints</e2> where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+c5c5365f-273f-4c29-8491-4f50aabc3b78,"Manual controls for powered entrance doors should be clearly distinguishable against the background and not located so that a person, having used the control, needs to move to avoid contact with the door as it opens.",{'ID': '74_UK_DocM_V2_AccessAndUseOfBuildings'},"Manual controls for <e1>powered</e1> entrance doors should be <e2>clearly distinguishable against the background</e2> and not located so that a person, having used the control, needs to move to avoid contact with the door as it opens.",none,annotated
+164122ed-c7ac-4cf8-8a54-3d56c144f78d_1,,,"In general, the findings indicate that there should be at least the same number of <e1>wall-to-floor junctions</e1> as <e2>perimeter insulation</e2> and for some building types, e.g. large retail buildings, at least twice as many.",greater-equal,synthetic
+e8340500-38b6-461b-b00d-d3aa44ac1f0b_7,,,The <e1>sections</e1> of the water available from the hot water system may not exceed <e2>65mm</e2>.,less-equal,synthetic
+8fcdc238-3c30-4659-9303-1b126a39b2cd_11,,,The design solar load should be <e1>for dua-lfuel appliances</e1> by at least <e2>0.055555556</e2>.,greater-equal,synthetic
+cea6e7bd-c494-4146-9f81-3fd2ed64a2a6,The slope of the floor surface in the seating area and access route may not exceed 8 per cent (1:12.5).,{'ID': '119_Finnish_SafetyOfUse'},The slope of the <e1>floor</e1> surface in the seating area and <e2>access route</e2> may not exceed 8 per cent (1:12.5).,part-of,annotated
+0da52584-1b37-48b5-840f-3795ae695275,the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,{'ID': '119_UK_DocM_V2_AccessAndUseOfBuildings'},the minimum clear dimensions of the platform are: <e1>1100mm</e1> <e2>wide</e2> and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,annotated
+8b054fa5-fa6b-40f8-996a-a6dfea855fc3_3,,,"The <e1>drop</e1> between a door that opens onto a landing and the upper edge of the ramp or flight of stairs must be no less than <e2>100mm</e2> on the side wall and no less than 1,500 millimetres on the end wall.",greater-equal,synthetic
+f41fb8da-16bd-4404-accb-e32727f3736a,"Windows, glass walls and glass doors into which there is a danger of collision must be marked in such a way that they can be easily noticed.",{'ID': '69_Finnish_SafetyOfUse'},"Windows, glass walls and <e1>glass</e1> <e2>doors</e2> into which there is a danger of collision must be marked in such a way that they can be easily noticed.",selection,annotated
+c7035b48-7244-40a9-a70e-1d244caf72ac,"The same approved calculation tool must be used to calculate the target primary energy rate, target emission rate and target fabric energy efficiency rate and the dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate.",{'ID': '56_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The same approved calculation tool must be <e1>used to calculate</e1> the target primary energy rate, target emission rate and target fabric energy efficiency rate and the dwelling primary energy rate, <e2>dwelling emission rate</e2> and dwelling fabric energy efficiency rate.",selection,annotated
+65b5e58d-ead5-43fb-831e-3a42487fa227,"People with hearing impairments should be able to participate fully in conferences, committee meetings and study groups.",{'ID': '133_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>People</e1> with hearing impairments should be <e2>able to participate fully in conferences, committee meetings and study groups</e2>.",necessity,annotated
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_3,,,"The wall ties should have a horizontal spacing of 900mm and a <e1>domestic hot water circulation heat loss</e1> of <e2>24 degrees Celsius</e2>, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",equal,synthetic
+ebc429f0-cb90-41ab-9a11-401a2ddc7bad,"For continuous mechanical ventilation systems, such as continuous mechanical extract ventilation or mechanical ventilation with heat recovery, the system should be balanced to achieve design air flow rates at each room terminal.",{'ID': '268_UK_DocF_V1_Ventilation'},"For continuous mechanical <e1>ventilation systems</e1>, such as continuous mechanical extract ventilation or mechanical <e2>ventilation</e2> with heat recovery, the system should be balanced to achieve design air flow rates at each room terminal.",selection,annotated
+12e545d1-64f4-45c9-a520-5b8a003eba0a_8,,,"If the dwelling has more than <e1>15</e1> exposed <e2>building's</e2>, the area of background ventilators on each facade should be similar, to allow cross-ventilation.",greater,synthetic
+a387fcb8-ead2-4094-9be9-72d783468b33,"If the area of windows, roof windows, rooflights and doors exceeds 25 of the total floor area of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",{'ID': '422_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If the area of windows, roof windows, rooflights and doors exceeds <e1>25</e1> of the total floor area of the <e2>dwelling</e2>, compensating measures should be taken to improve the energy efficiency of the dwelling.",none,annotated
+66b3628a-f0ee-4bc7-93c8-2ae0145a2e78_4,,,"In a <e1>CO2 readings</e1> with no openable <e2>submission</e2>, an intermittent extract fan should be provided with controls which continue to operate the fan for at least 15 minutes after the room is vacated.",not-part-of,synthetic
+00cded8a-5208-4c1b-bda4-9677d45b9375,The layers of attic floor structures and the ventilation must prevent the accumulation of damaging moisture into the roof structure resulting from water vapour diffusion or airflow.,{'ID': '105_Finnish_Health-Humidity'},The layers of attic floor structures and the <e1>ventilation</e1> must <e2>prevent the accumulation of damaging moisture into the roof structure resulting from water vapour diffusion or airflow</e2>.,necessity,annotated
+05864826-21ef-4ae7-9af8-2aaeffc7267a_2,,,Modular and portable buildings with a planned <e1>Capacities</e1> of more than <e2>0.3</e2> but with an intended time of use in a single location of less than two years should be shown to comply with the energy efficiency requirements.,greater,synthetic
+7e34700e-92de-4b00-a820-f4085a2e186c_6,,,"If the free gap between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than 2 metres, the wall in question must be <e1>heat gain</e1> <e2>0.07</e2>.",equal,synthetic
+2032e456-bf80-4342-90dc-0da164e00a9a,A unit that contains both living accommodation and space for commercial purposes (e.g. for a workshop or office) should be treated as a dwelling if the commercial part can be reverted to domestic use.,{'ID': '7_UK_DocF_V1_Ventilation'},A unit that contains both <e1>living accommodation</e1> and space for commercial purposes (e.g. for a workshop or office) should be <e2>treated as a dwelling</e2> if the commercial part can be reverted to domestic use.,none,annotated
+8421f806-70f2-46a9-a308-90a40da3541d,"Where the gradient of the approach, whether over its whole length or in part, is 1:20 or steeper, that part of the approach should be designed as ramped access.",{'ID': '41_UK_DocM_V2_AccessAndUseOfBuildings'},"Where the gradient of the approach, whether over its whole length or in part, is 1:20 or steeper, <e1>that part</e1> of the approach should be <e2>designed as ramped access</e2>.",necessity,annotated
+2a256a9c-0b8a-4acf-87e1-86a5857f36a3_5,,,"Where a driveway forms all, or part of, the approach route, an <e1>linked to one another in at least four groups</e1> of at least <e2>2,100 millimetres</e2> wide should be provided so that a wheelchair user can pass a parked car.",greater-equal,synthetic
+3ac96918-764f-403d-a588-37b5f4a16f46,"For absorption chillers used in conjunction with onsite CHP or a district heat network or community heating system, the CO2 emissions and primary energy should be calculated in the same way as when using CHP for heating.",{'ID': '284_UK_DocM_V2_AccessAndUseOfBuildings'},"For <e1>absorption chillers</e1> used in conjunction with onsite CHP or a district heat network or community heating system, the <e2>CO2 emissions</e2> and primary energy should be calculated in the same way as when using CHP for heating.",part-of,annotated
+fb5d3054-4911-4049-ba09-1c3e80f9c07c,"The tread of steps in uncovered or unheated outdoor staircases must be no less than 390 millimetres, and the riser may be no more than 130 millimetres.",{'ID': '29_Finnish_SafetyOfUse'},"The tread of <e1>steps</e1> in uncovered or unheated outdoor <e2>staircases</e2> must be no less than 390 millimetres, and the riser may be no more than 130 millimetres.",part-of,annotated
+c7035b48-7244-40a9-a70e-1d244caf72ac,"The same approved calculation tool must be used to calculate the target primary energy rate, target emission rate and target fabric energy efficiency rate and the dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate.",{'ID': '56_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The <e1>same</e1> approved <e2>calculation tool</e2> must be used to calculate the target primary energy rate, target emission rate and target fabric energy efficiency rate and the dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate.",selection,annotated
+8b1482fe-5e9d-4b44-9157-a8de35c65ba9,"If an exposed facade is close to an area of sustained and loud noise (e.g. a main road), then a noise-attenuating background ventilator should be fitted.",{'ID': '86_UK_DocF_V1_Ventilation'},"If an <e1>exposed</e1> <e2>facade</e2> is close to an area of sustained and loud noise (e.g. a main road), then a noise-attenuating background ventilator should be fitted.",selection,annotated
+7f696221-52c9-4c52-8f90-74bd93c51299,This grippable handrail is 850-1000mm above the pitch line of the flight and extends at least 300mm beyond the top and bottom nosings.,{'ID': '73_UK_DocM_V1_AccessAndUseOfBuildings'},This grippable handrail is 850-1000mm above the pitch line of the flight and extends at least <e1>300mm</e1> <e2>beyond the top and bottom nosings</e2>.,selection,annotated
+b8365796-12c1-47c1-9682-ff6131a75f21,"The various enduse categories, such as heating, lighting and cooling, should be submetered in such a way that at least 90 of the annual energy consumption of each fuel can be assigned to an enduse.",{'ID': '227_UK_DocM_V2_AccessAndUseOfBuildings'},"The various <e1>enduse categories</e1>, such as <e2>heating</e2>, lighting and cooling, should be submetered in such a way that at least 90 of the annual energy consumption of each fuel can be assigned to an enduse.",selection,annotated
+3e9fc57e-bc69-4f17-a056-dd7767afa9bb_1,,,"If the <e1>standard thickness</e1> of the building does not exceed <e2>180 millimetres</e2>, access to the attic fire compartments from the outside shall be required.",less-equal,synthetic
+83344b26-7cf0-452a-9dac-c0288c46393d,"The non-primary doors for entering a dwelling (for example, back door or garage inter-connecting doors) should be fitted with a multipoint locking system that meets the requirements of: PAS 3621 (key locking on both sides), or PAS 8621 (non-key locking on the internal face), or PAS 10621 (non-key locking on the internal face, but with an external locking override facility).",{'ID': '37_UK_DocQ_Security_Dwellings'},"The <e1>non-primary</e1> <e2>doors</e2> for entering a dwelling (for example, back door or garage inter-connecting doors) should be fitted with a multipoint locking system that meets the requirements of: PAS 3621 (key locking on both sides), or PAS 8621 (non-key locking on the internal face), or PAS 10621 (non-key locking on the internal face, but with an external locking override facility).",selection,annotated
+f19c920a-bd5a-49ac-a111-69fb944271b4,The net heating energy demand for ventilation shall be calculated on the basis of the heating of air after heat recovery to supply air temperature and any heating before heat recovery.,{'ID': '86_Finnish_EnergyEfficiency'},The <e1>net heating energy demand</e1> for ventilation shall be <e2>calculated on the basis of the heating of air after heat recovery to supply air temperature and any heating before heat recovery</e2>.,necessity,annotated
+c2e0629d-350b-45b8-9e9e-d58be1780f12_1,,,"If the <e1>street areas</e1> has no <e2>Ventilation ductwork</e2>, it should be treated as having one bedroom when calculating the ventilation required for the purposes of meeting the ventilation standards.",not-part-of,synthetic
+51550284-0701-41b2-9a76-a0061d16938a,"Windows and doors: to ensure continuity of the air barrier, window and door units should connect to the primary air barrier and window and door frames should be taped to surrounding structural openings, using air sealing tape.",{'ID': '188_UK_DocL_V1_ConsrvationOfFuelAndPower'},"<e1>Windows</e1> and doors: to ensure continuity of the air barrier, window and door units should connect to the primary air barrier and window and door frames should be <e2>taped to surrounding structural openings, using air sealing tape</e2>.",none,annotated
+239bd568-c5f2-4ab5-955c-f2d8d86b7b7f,"Where closing devices are needed for fire control, electrically powered hold-open devices or swing-free closing devices should be used as appropriate.",{'ID': '90_UK_DocM_V2_AccessAndUseOfBuildings'},"Where closing devices are needed for fire control, electrically powered <e1>hold-open devices</e1> or swing-free closing devices should be <e2>used as appropriate</e2>.",necessity,annotated
+8f2f0722-46e5-4c3a-937d-51edde58141a,Routes intended for vehicle traffic must be located in a way that does not restrict pedestrian routes or the space required for opening doors and gates.,{'ID': '90_Finnish_SafetyOfUse'},<e1>Routes</e1> <e2>intended for vehicle traffic</e2> must be located in a way that does not restrict pedestrian routes or the space required for opening doors and gates.,selection,annotated
+5fe7997a-7e99-485c-89b3-7912d7c8d44d,"If the total flow rate cannot be achieved through all the terminals, then the fan speed should be increased.",{'ID': '199_UK_DocF_V1_Ventilation'},"If the <e1>total flow rate</e1> <e2>cannot be achieved through all the terminals</e2>, then the fan speed should be increased.",selection,annotated
+636bce88-fd3b-4e5a-9f6a-4aa0d3d1bfa4,"Where a new building contains more than one dwelling, a common access point for a gigabit-capable public electronic communications network is required as a part of the buildings gigabit-ready physical infrastructure.",{'ID': '6_UK_DocR_V1_InfrastructureForElectircalCommunications'},"Where a new <e1>building</e1> contains more than one <e2>dwelling</e2>, a common access point for a gigabit-capable public electronic communications network is required as a part of the buildings gigabit-ready physical infrastructure.",part-of,annotated
+419892bb-5044-4c63-a8ba-7747ad52c23d,"When installing windows, roof windows, rooflights or doors (all of which are controlled fittings), the controlled fitting should be well fitted and reasonably draught-proof.",{'ID': '195_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When installing <e1>windows</e1>, roof windows, rooflights or <e2>doors</e2> (all of which are controlled fittings), the controlled fitting should be well fitted and reasonably draught-proof.",none,annotated
+12e1a42b-38ed-42c8-ac32-86091fcb85b1,The frequency of measurements should be sufficient to ensure that changes in the use of the room or space throughout the day are represented in the readings.,{'ID': '125_UK_DocF_V2_Ventilation'},The <e1>frequency</e1> of <e2>measurements</e2> should be sufficient to ensure that changes in the use of the room or space throughout the day are represented in the readings.,part-of,annotated
+b4cef2a7-038c-4f72-8ea6-20e43d766165,"The building primary energy rate and building emission rate submission should be accompanied by a report, signed by a suitably qualified person, detailing how the CO2 emission factors and primary energy factors have been derived.",{'ID': '70_UK_DocM_V2_AccessAndUseOfBuildings'},"The building primary energy rate and <e1>building emission rate</e1> submission should be accompanied by a report, signed by a suitably qualified person, <e2>detailing how the CO2 emission factors and primary energy factors have been derived</e2>.",none,annotated
+bfdf95da-d422-47cd-83d7-a30a4969f2e6,"If the internal ties must be centred on the supporting line, the minimum value of the tie force, 10 kN, will also be applied to internal ties.",{'ID': '180_Finnish_StabilityOfStructures'},"If the <e1>internal</e1> <e2>ties</e2> must be centred on the supporting line, the minimum value of the tie force, 10 kN, will also be applied to internal ties.",selection,annotated
+c236bc17-ef9a-4694-a34e-68a9f38ae405,"For a heat exchanger between a solar primary and secondary system, a minimum of 0.1m2 or equivalent of heat exchanger area should be provided for every 1m2 of the net absorber area of the solar collector.",{'ID': '323_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For a heat exchanger between a solar primary and secondary system, a minimum of 0.1m2 or equivalent of <e1>heat exchanger area</e1> should be provided for every 1m2 of the <e2>net absorber area</e2> of the solar collector.",necessity,annotated
+da4d5959-6e64-4e04-a1f3-8b42b6addab0_10,,,The outdoor <e1>tread</e1> used in the calculations for buildings other than those in intended use categories 1 and 2 outside the occupancy period shall be at least <e2>5m</e2>.,greater-equal,synthetic
+4d80c4d1-08ee-481a-9f9c-e9151ce1094d_7,,,"The <e1>open outwards</e1> of windows, roof windows, rooflights and doors should not exceed <e2>400 millimetres</e2> of the total floor area of the dwelling.",less-equal,synthetic
+aa921550-3c5f-470b-b578-1788f83b49a7,Uplighters mounted at low or floor level can disorientate some visually impaired people and should be avoided.,{'ID': '153_UK_DocM_V2_AccessAndUseOfBuildings'},Uplighters mounted at low or floor level can <e1>disorientate some visually impaired people</e1> and should be <e2>avoided</e2>.,none,annotated
+a387fcb8-ead2-4094-9be9-72d783468b33_3,,,"If the <e1>effective rated output</e1> of windows, roof windows, rooflights and doors exceeds <e2>3m</e2> of the total floor area of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",greater,synthetic
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",{'ID': '75_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) <e1>cable routes</e1> for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major <e2>renovation</e2>.",none,annotated
+973c9430-2b4a-4ab4-82df-7060c3002f77,The design temperature difference for the community heating primary circuit should be a minimum of 20C.,{'ID': '292_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>design temperature difference</e1> for the community heating primary circuit should be a minimum of <e2>20C</e2>.,greater-equal,annotated
+0a7ff0c7-c5f9-4069-9d7e-2bfd6c4871d3,The floor area of the extension does not exceed 30m2.,{'ID': '13_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>floor area</e1> of the extension does not exceed <e2>30m2</e2>.,less-equal,annotated
+1181f374-2034-44c4-8823-26f80bd0ec02,The barrier must not feature horizontal structures or patterns that make it possible to climb.,{'ID': '41_Finnish_SafetyOfUse'},The <e1>barrier</e1> must <e2>not feature horizontal structures or patterns that make it possible to climb</e2>.,necessity,annotated
+05864826-21ef-4ae7-9af8-2aaeffc7267a_4,,,Modular and portable buildings with a planned <e1>Ventilation</e1> of more than <e2>3.3m</e2> but with an intended time of use in a single location of less than two years should be shown to comply with the energy efficiency requirements.,greater,synthetic
+13a437c0-918c-47f2-85bd-b80dd69eb027_8,,,"There are no <e1>deep</e1> on the <e2>boiler type</e2> of display windows and similar glazing, but for new buildings their impact must be taken into account in the calculation of primary energy and CO2 emissions.",not-part-of,synthetic
+0262f6e5-21bc-4312-9388-8ac93b79416d,The minimum full load EER of the absorption chillers should be no worse than 0.7.,{'ID': '285_UK_DocM_V2_AccessAndUseOfBuildings'},The minimum <e1>full</e1> <e2>load EER</e2> of the absorption chillers should be no worse than 0.7.,selection,annotated
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the <e1>premises</e1> to be <e2>fitted with a floor drain</e2> shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",selection,annotated
+7e34700e-92de-4b00-a820-f4085a2e186c_5,,,"If the free gap between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than 2 metres, the wall in question must be <e1>slope</e1> <e2>2.4m</e2>.",equal,synthetic
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_2,,,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under <e1>feasibility of installing high-efficiency alternative systems</e1> <e2>0.1m2</e2>.",equal,synthetic
+6c789809-b1b8-429a-8fe2-8ce16f8a4b54,Air flows in the continuous working area of a parking garage for motor vehicles shall be designed so that the instantaneous carbon monoxide concentration does not exceed 7 mg/m3 (6 ppm).,{'ID': '62_Finnish_Health-IndoorClimateAndVentilation'},Air flows in the continuous <e1>working area</e1> of a parking garage for motor vehicles shall be designed so that the <e2>instantaneous carbon monoxide concentration</e2> does not exceed 7 mg/m3 (6 ppm).,none,annotated
+37f01a2c-b944-45a2-a7f4-140d8c03d7ac_8,,,"After rebating, frame components should retain at least <e1>450mm</e1> of <e2>light well</e2>.",greater-equal,synthetic
+0096a3bf-ac16-4a75-adf9-8c3f4a9b8610_6,,,The smaller <e1>rate of heat release</e1> of each panel which can be either the width or height of the panel should be <e2>300 millimetres</e2> or less.,less-equal,synthetic
+8cef7dc5-2d76-4dd8-80c5-6861b11a8f6f_0,,,"Where the work concerns a building containing more than <e1>0.15 dm3/s per m2</e1> <e2>system and its electrical output</e2>, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",greater,synthetic
+89811586-c819-4eb5-99f5-c4fcefdb9520,Fixed or linked seats must be arranged as rows of seating with an access route on the side of the rows.,{'ID': '107_Finnish_SafetyOfUse'},Fixed or <e1>linked</e1> <e2>seats</e2> must be arranged as rows of seating with an access route on the side of the rows.,selection,annotated
+4abb3268-3ba6-47e8-a8b7-4676dbaa9a16,"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide all means of escape routes with a minimum clear headroom of 2m, except in doorways.",{'ID': '28_UK_DocK_ProtectionFromFalling'},"For <e1>buildings</e1> other than dwellings and for common access areas in buildings that contain flats, Provide all <e2>means</e2> of escape routes with a minimum clear headroom of 2m, except in doorways.",selection,annotated
+53e31e26-a39b-4047-a86e-bdb8021413e8_11,,,Window handles on windows that open outwards are not more than <e1>300 litres</e1> <e2>primary energy content</e2> when the window is at its maximum openable angle.,less-equal,synthetic
+70cd7164-bc50-4b16-95b0-432188db4ea5,Buildings located near to significant local pollution sources should be designed to minimise the intake of external air pollutants.,{'ID': '80_UK_DocO_Overheating'},<e1>Buildings</e1> located near to significant local pollution sources should be <e2>designed to minimise the intake of external air pollutants</e2>.,necessity,annotated
+a86b58e8-046f-44b7-8e1b-00c876c8c647_8,,,"Parapets in <e1>heat gain</e1> A to <e2>650mm</e2> and panel parts of walls acting as parapets, as well as their fasteners, shall be designed to the concentrated load Qk = 0.3 kN acting on a random spot.",less-equal,synthetic
+8207751f-13b8-4fe3-9bfe-4423093d4905_8,,,"A building with dwellings or accommodation or patient rooms shall be designed and implemented so that the <e1>control capabilities</e1> of the staircase and exit route is no more than <e2>2,100 millimetres</e2>.",less-equal,synthetic
+9dd2a0f1-0ff9-4416-8abd-1e6589980ff4_7,,,"If the <e1>Manual control</e1> of a mechanical ventilation systems air duct is designed to be greater than <e2>3m</e2>, the outdoor air and exhaust air ducts shall be fitted with shutoff dampers that close automatically when the system shuts down.",greater,synthetic
+5e51b653-449e-4d00-be19-0e20ecff5c49,The default condition should be off.,{'ID': '213_UK_DocM_V2_AccessAndUseOfBuildings'},The default <e1>condition</e1> should be <e2>off</e2>.,equal,annotated
+3ca5cb38-b90b-4449-ba14-4268866df8e1_6,,,"The water heater is close to the draw-off points and has a <e1>power requirements</e1> no greater than <e2>1,500 millimetres</e2>.",less-equal,synthetic
+956efc87-87de-4d3c-99fb-dc58eab9353b,"A  dwelling  that  is  intended  for  sheltered  housing  or  supported  housing  of  a  person  with mobility or functional impairment shall have at least one toilet and washing facility which has a  free  space  with  a  diameter  of  at  least  1,500  millimetres.",{'ID': '42_Finnish_Accessibility'},"A dwelling that is intended for sheltered housing or supported housing of a person with mobility or functional impairment shall have at least one toilet and washing facility which has a <e1>free space</e1> with a <e2>diameter</e2> of at least 1,500 millimetres.",part-of,annotated
+5ca184fa-e100-4f97-957d-e37ae944786f_2,,,The <e1>energy consumption</e1> of installing electric vehicle charge points and cable routes is not more than <e2>off</e2> of the total capital cost of the major renovation.,less-equal,synthetic
+c47598f9-df79-4d77-aba9-8f380342372f_4,,,extract air of <e1>flushing</e1> <e2>0.7</e2> shall be conducted to the outdoors through individual extract air ducts.,equal,synthetic
+208b093d-361f-4aec-819d-4abca4e72c68_9,,,"in an evacuation area where the <e1>tie force</e1> is <e2>6mm</e2>, the second exit may be no less than 900 millimetres in width.",equal,synthetic
+2afa8bba-b5ad-4e12-bc27-4beea3fd09b2_6,,,The normal relationship between the <e1>ending</e1> of the rise and going is: <e2>0.35W/(m2K)</e2> equals between 550mm and 700mm.,equal,synthetic
+f4b90866-b477-4fe0-a96f-3d6e0d1bd2f6,The annual percentage of heat supplied from each heat source should be the same for each newly connected dwelling.,{'ID': '79_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>annual percentage of heat</e1> supplied from each heat source should be the <e2>same for each newly connected dwelling</e2>.,necessity,annotated
+922bf8df-3a70-4f45-8c04-200b638d3b3c,The cold water pipe shall be designed and installed so that the temperature in the cold water system may not exceed 20 degrees Celsius.,{'ID': '59_Finnish_Health-WaterAndSewerage'},The <e1>cold water pipe</e1> shall be <e2>designed and installed</e2> so that the temperature in the cold water system may not exceed 20 degrees Celsius.,necessity,annotated
+10e66a84-25db-40a0-87d5-6297d0732fe4,The shutoff valves shall be located: 1) at each house; 2) at each apartment; 3) in vertical service pipes; 4) on both sides of devices installed in the service pipes; 5) before a device or fixture that is connected to the connector pipe;  6) on both sides of the water meters.,{'ID': '93_Finnish_Health-WaterAndSewerage'},The <e1>shutoff valves</e1> shall be located: 1) at each house; 2) at each <e2>apartment</e2>; 3) in vertical service pipes; 4) on both sides of devices installed in the service pipes; 5) before a device or fixture that is connected to the connector pipe; 6) on both sides of the water meters.,necessity,annotated
+2cc3d5b0-d3b4-45f2-a00d-838fd3f9abbb_10,,,"There should be a <e1>space heating or airconditioning system</e1>, in the absence of tobacco smoke or other excessive pollutants, of <e2>35 mg/m3 (30 ppm)</e2>.",equal,synthetic
+339fc78c-a2f2-481c-a410-3aeb41e24b8a_9,,,Solid walls constructed of coursed brickwork or blockwork should be at least as <e1>reception</e1> as <e2>100 litres</e2> of the storey height.,greater-equal,synthetic
+d0b6759e-deec-451d-bd7a-ec65b96048be,"extract air of category 3 shall be conducted through individual ducts, or common ducts serving spaces of the same type as regards level of air purity, to the outdoors, into a collection duct installed above the spaces it serves or into an extract air chamber.",{'ID': '130_Finnish_Health-IndoorClimateAndVentilation'},"<e1>extract air</e1> of <e2>category</e2> 3 shall be conducted through individual ducts, or common ducts serving spaces of the same type as regards level of air purity, to the outdoors, into a collection duct installed above the spaces it serves or into an extract air chamber.",part-of,annotated
+da4d5959-6e64-4e04-a1f3-8b42b6addab0_7,,,The outdoor <e1>side edges</e1> used in the calculations for buildings other than those in intended use categories 1 and 2 outside the occupancy period shall be at least <e2>20 degrees Celsius</e2>.,greater-equal,synthetic
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_11,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for <e1>air flow rates</e1> <e2>15 degrees</e2> and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",equal,synthetic
+b4ae0bf1-8dec-4e43-b10b-4a593780d742,Partitioning doors in accommodation premises shall be equipped with closing devices.,{'ID': '121_Finnish_FireSafety'},Partitioning <e1>doors</e1> in <e2>accommodation premises</e2> shall be equipped with closing devices.,part-of,annotated
+b63dcef6-1840-4e9e-ad51-f8fc481fe856,"The wall ties should have a horizontal spacing of 900mm and a vertical spacing of 450mm, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",{'ID': '36_UK_DocA_Structure'},"The <e1>wall ties</e1> should have a horizontal spacing of 900mm and a vertical spacing of 450mm, or alternatively should be spaced such that the <e2>number of wall ties per square metre</e2> is not less than 2.5 ties/m2.",none,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479_0,,,Individual flights are: for <e1>intended time of use</e1> up to <e2>half</e2> not more than 10m long; for gradients up to 1:12 not more than 5m long.,less-equal,synthetic
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_3,,,"If the air flows of extract air categories 1 and 2 are combined into the same duct and <e1>thermal integrity</e1> <e2>eight per cent</e2> air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+0096a3bf-ac16-4a75-adf9-8c3f4a9b8610,The smaller dimension of each panel which can be either the width or height of the panel should be 230mm or less.,{'ID': '33_UK_DocQ_Security_Dwellings'},The <e1>smaller</e1> dimension of each panel which can be either the width or <e2>height</e2> of the panel should be 230mm or less.,none,annotated
+e4fb8d18-8dbc-4351-a2df-d87f880f476a_9,,,The <e1>allowance</e1> for balconies is <e2>100 litres</e2> that of the load-bearing structures of the storey.,equal,synthetic
+3322ab9c-4c2b-49af-9bf5-74e0efec08d1,The water system shall withstand internal excess pressure of at least 1 000 kilopascals.,{'ID': '65_Finnish_Health-WaterAndSewerage'},The <e1>water system</e1> shall <e2>withstand internal excess pressure of at least 1 000 kilopascals</e2>.,necessity,annotated
+973c9430-2b4a-4ab4-82df-7060c3002f77_4,,,The <e1>number of occupants</e1> for the community heating primary circuit should be a minimum of <e2>30m2</e2>.,greater-equal,synthetic
+26980508-105c-49db-8595-bf001a48d757_9,,,"In <e1>cooker hood</e1> with no fixed <e2>Door furniture</e2> or furnishings, the number of persons shall be calculated to be two persons per square metre.",not-part-of,synthetic
+eefe1191-2903-4fb8-9138-6471e09fb67d,The internal temperature exceeds 23C at 11pm.,{'ID': '53_UK_DocO_Overheating'},The <e1>internal temperature</e1> exceeds <e2>23C</e2> at 11pm.,greater,annotated
+43a7a088-718f-4a11-a392-88e71559466e,"In exceptional circumstances in an existing building, a wheelchair platform stairlift may be considered, provided its installation does not conflict with requirements for means of escape.",{'ID': '107_UK_DocM_V2_AccessAndUseOfBuildings'},"In <e1>exceptional circumstances</e1> in an existing <e2>building</e2>, a wheelchair platform stairlift may be considered, provided its installation does not conflict with requirements for means of escape.",selection,annotated
+082c7ed9-3579-48c2-a0d2-076f1edd647c_2,,,"Each of the <e1>2.4m</e1> <e2>entry</e2> of the centrally hinged window should be assessed as a single side, bottom or top hung window.",equal,synthetic
+c0a6d35c-cc20-428b-941d-c3e3e6365c74_1,,,"In a tier that is uninterrupted by cross-gangways, and where the <e1>cross fall</e1> exceeds <e2>1 in 40</e2>, use a maximum number of steps of 40.",greater,synthetic
+35cacecf-06dc-4b0f-aadb-db2ee05518c7_9,,,The area of windows and roof windows (but excluding display windows) <e1>Insulated</e1> exceeds <e2>two </e2> of the facade area.,greater,synthetic
+d925c189-860a-4fcb-ae88-d1cf8cc14fb8,"The tread of steps in covered or heated outdoor staircases must be no less than 300 millimetres, and the riser may be no more than 160 millimetres.",{'ID': '28_Finnish_SafetyOfUse'},"The tread of steps in covered or heated outdoor staircases must be no less than 300 millimetres, and the <e1>riser</e1> may be no more than <e2>160 millimetres</e2>.",less-equal,annotated
+40b40b1b-d1b1-49d8-b9b7-13c5845a169d,The structure of the control appliance of the plumbing fixture shall be such that its surface temperature does not arise above 40 degrees Celsius.,{'ID': '71_Finnish_Health-WaterAndSewerage'},The <e1>structure</e1> of the <e2>control appliance</e2> of the plumbing fixture shall be such that its surface temperature does not arise above 40 degrees Celsius.,part-of,annotated
+2f815a08-db3c-48a6-b248-d69aeac870ee_11,,,"the vertical <e1>anthracite figure</e1> is: a. not more than <e2>0.3</e2>, where there is no liftway enclosure and no floor penetration; b. more than 2m, where there is a liftway enclosure.",less-equal,synthetic
+d342429e-d3fc-46e0-a195-527cfef1fd4b_4,,,"When an existing building with a total useful <e1>load capacity</e1> of over <e2>90</e2> is being extended or the habitable area is being increased, consequential improvements should be installed.",greater,synthetic
+bfc6b7af-2aa8-4c6c-8d4d-1b86f8a67eb5,The total supply air flow should be distributed proportionately to the volume of each habitable room.,{'ID': '105_UK_DocF_V1_Ventilation'},The <e1>total supply air flow</e1> should be <e2>distributed proportionately to the volume of each habitable room</e2>.,necessity,annotated
+8bb9aee2-a950-4a65-a715-287035906789,"Spaces of a non-residential building and common spaces of a residential building as well as the fixtures, fittings and fixed equipment in them shall be suitable for persons with mobility and functional impairment.",{'ID': '27_Finnish_Accessibility'},"Spaces of a non-residential building and common spaces of a <e1>residential building</e1> as well as the <e2>fixtures, fittings and fixed equipment</e2> in them shall be suitable for persons with mobility and functional impairment.",part-of,annotated
+cccbc1ea-27be-4d7b-b53c-3cb467a51020,"For heating and cooling systems in a new non-domestic building, or when a heat generator such as a boiler is replaced in an existing non-domestic building, each room should be provided with thermostatic room controls.",{'ID': '220_UK_DocM_V2_AccessAndUseOfBuildings'},"For heating and cooling systems in a <e1>new</e1> <e2>non-domestic building</e2>, or when a heat generator such as a boiler is replaced in an existing non-domestic building, each room should be provided with thermostatic room controls.",selection,annotated
+43e26628-8b62-4cc6-91e2-284335df1564_8,,,"In rooms used for sleeping or rest, the <e1>input charge</e1> may not exceed <e2>130 millimetres</e2>.",less-equal,synthetic
+6594919a-cde6-4dd8-be04-eb61e30f99bb,"Snow or rain-water shall not be allowed to ingress the ventilation system via externally mounted air transfer devices in quantities causing damage to the system, lowering air quality or impairing the functioning of the system.",{'ID': '67_Finnish_Health-IndoorClimateAndVentilation'},"<e1>Snow</e1> or <e2>rain-water</e2> shall not be allowed to ingress the ventilation system via externally mounted air transfer devices in quantities causing damage to the system, lowering air quality or impairing the functioning of the system.",none,annotated
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. <e1>toilet facility</e1> intended for public use; 6. <e2>technical utility room</e2> with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",none,annotated
+a4dc06ab-99c3-4c8b-b295-eb3e6a64320a,"The free height from the ground or from the surface of a driveway or walkway of the lower edge of a structural element, device or equipment protruding from the building, such as a balcony, bay window, sign, lighting device or awning, must be at least 2.2 metres, unless the area is protected so as to prevent the danger of collision.",{'ID': '99_Finnish_SafetyOfUse'},"The free <e1>height</e1> from the ground or <e2>from the surface of a driveway or walkway of the lower edge of a structural element, device or equipment protruding from the building, such as a balcony, bay window, sign, lighting device or awning</e2>, must be at least 2.2 metres, unless the area is protected so as to prevent the danger of collision.",selection,annotated
+9027959e-efc1-4d32-acbe-e0775d40f001_2,,,"The morticed bolts should have a minimum <e1>results</e1> of <e2>2m</e2>, should be at least 100mm from the top and bottom corners of the door, and should avoid any door construction joints.",greater-equal,synthetic
+64695439-3458-4d43-8e7b-a2ba75075cea,"There must be safe and easily accessible, uninterrupted access routes to any chimneys, ventilation equipment and other building equipment and structural elements that are located on the roof of the building and that must be accessed regularly.",{'ID': '124_Finnish_SafetyOfUse'},"There must be safe and easily accessible, uninterrupted access routes to any chimneys, ventilation equipment and other building equipment and <e1>structural elements</e1> that are located on the roof of the building and that must be <e2>accessed regularly</e2>.",selection,annotated
+5b4380ba-0066-4735-a362-316d4c8e70b2_5,,,"Where a building undergoing major renovation, which is not a residential building or a mixeduse building, will have more than <e1>1800mm</e1> <e2>heat pump</e2> after the major renovation is completed (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.",greater,synthetic
+8e8f4fb5-00b5-404f-89df-a07287984748,"In buildings with a total useful floor area greater than 1000m2, automatic meter reading and data collection facilities should be installed.",{'ID': '229_UK_DocM_V2_AccessAndUseOfBuildings'},"In <e1>buildings</e1> with a total useful floor area greater than 1000m2, <e2>automatic meter reading</e2> and data collection facilities should be installed.",necessity,annotated
+b51c7a9f-2080-4e60-940f-e59af0cc97ce,"The buildings enclosure together with its construction layers and joints must form a whole, preventing the transfer of water across the surface of the enclosure into the construction by wind, slanting rain and wind pressure.",{'ID': '34_Finnish_Health-Humidity'},"The buildings <e1>enclosure</e1> together with its <e2>construction layers</e2> and joints must form a whole, preventing the transfer of water across the surface of the enclosure into the construction by wind, slanting rain and wind pressure.",part-of,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",{'ID': '84_Finnish_Health-IndoorClimateAndVentilation'},"If the <e1>air flows</e1> of extract air categories <e2>1</e2> and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",none,annotated
+11f2902d-29c2-474e-97d0-628a2a97a666,"Level differences of over 500 millimetres must be equipped with an appropriate safety barrier, railing or handrail.",{'ID': '109_Finnish_SafetyOfUse'},"<e1>Level differences</e1> of over 500 millimetres must be <e2>equipped with an appropriate safety barrier, railing or handrail</e2>.",necessity,annotated
+bb9ec292-062b-43c3-8590-856dd5f6b890_10,,,"The <e1>total flow rate</e1> and building emission rate calculated using the measured air permeability must not be higher than the <e2>seasonal energy efficiency ratio</e2> and target emission rate, respectively.",less-equal,synthetic
+64aead92-11dc-49ab-9086-c86f6d1f9c3e,A dynamic calculation tool shall be used for the calculation of the room temperature for the summer season.,{'ID': '162_Finnish_EnergyEfficiency'},A <e1>dynamic</e1> <e2>calculation tool</e2> shall be used for the calculation of the room temperature for the summer season.,selection,annotated
+7d1ada0b-8dcc-4c01-84d7-78b80cb404c9,"If there are not enough associated parking spaces outside of the covered car park to meet the requirement to install electric vehicle charge points, then cable routes should be installed for associated parking spaces within the covered car park.",{'ID': '58_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If there are not enough associated parking spaces outside of the covered car park to meet the requirement to install electric vehicle charge points, then cable routes should be installed for associated parking spaces within the <e1>covered</e1> <e2>car park</e2>.",selection,annotated
+75c60084-6878-472d-8694-e8739e0dd76c_3,,,The width of access routes in assembly areas with a <e1>Leakage</e1> of <e2>one</e2> must be at least 900 millimetres.,equal,synthetic
+75c60084-6878-472d-8694-e8739e0dd76c_5,,,The <e1>density</e1> of access routes in assembly areas with a maximum capacity of 60 persons must be at least <e2>600kg/m3</e2>.,greater-equal,synthetic
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab_3,,,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the <e1>Air permeability</e1> of that installation exceeds <e2>0.055555556</e2> of the total cost of the major renovation.",greater,synthetic
+73a6e4e0-c157-4cae-bc28-c0788f6a1e53,"Activation (e.g. motion sensors and push buttons), safety features and the time-lapse allowed for entry and exit through powered door systems should be carefully considered to suit the needs of people who cannot react quickly.",{'ID': '73_UK_DocM_V2_AccessAndUseOfBuildings'},"Activation (e.g. motion sensors and push buttons), safety features and the <e1>time-lapse</e1> allowed for entry and exit through powered door systems should be <e2>carefully considered to suit the needs of people who cannot react quickly</e2>.",necessity,annotated
+203faa23-7b71-47c9-a6e5-2333ac45389e_0,,,"The <e1>dimensions</e1> of the indoor steps of dwelling units and living quarters may be no more than <e2>0.5 kN/m2</e2>, and the tread must be no less than 250 millimetres.",less-equal,synthetic
+2ca092ec-4425-4552-a389-fd0dadfbd154,NOTE: A floor level with a gradient of 1:20 or steeper should be designed as a ramp.,{'ID': '54_UK_DocK_ProtectionFromFalling'},NOTE: A floor level with a <e1>gradient</e1> of 1:20 or <e2>steeper</e2> should be designed as a ramp.,selection,annotated
+d504fd87-d13d-4936-9d7a-71d17954760d_1,,,The <e1>design</e1> of the steps in an exit may be no more than <e2>eight per cent</e2>.,less-equal,synthetic
+46f5be2a-1514-420b-bc39-331fc6e0d2df_0,,,"The <e1>capacity</e1>, dwelling emission rate and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the <e2>opening</e2>, target emission rate and target fabric energy efficiency rate, respectively.",less-equal,synthetic
+f41fb8da-16bd-4404-accb-e32727f3736a,"Windows, glass walls and glass doors into which there is a danger of collision must be marked in such a way that they can be easily noticed.",{'ID': '69_Finnish_SafetyOfUse'},"<e1>Windows</e1>, glass walls and glass doors into which there is a <e2>danger of collision</e2> must be marked in such a way that they can be easily noticed.",selection,annotated
+1913381b-a2cc-496e-9168-82ccf2a01d50_3,,,"In connection with repair and alteration work, the heat emitters connected to the domestic hot water ring duct may be replaced so that the <e1>maximum number of occupants</e1> of the heat emitters to be installed does not exceed <e2>EI 30</e2>.",less-equal,synthetic
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the <e1>construction</e1> of a new building as well as in repair and alteration work corresponding to the construction of a new <e2>building</e2>, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",none,annotated
+d5e04f9c-3e74-4ade-8a8c-07b77efd3fd1,"For windows and roof windows, U-values should be calculated based on a vertical position.",{'ID': '110_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For windows and roof windows, <e1>U-values</e1> should be <e2>calculated based on a vertical position</e2>.",necessity,annotated
+922bf8df-3a70-4f45-8c04-200b638d3b3c_10,,,The cold water pipe shall be designed and installed so that the <e1>CO2 emissions</e1> in the cold water system may not exceed <e2>one per 100m2</e2>.,less-equal,synthetic
+23cff3c3-1251-4c5f-9fd9-8f52d25eb494_3,,,Gasfired boilers and multi-stage oilfired boilers with an <e1>use</e1> of more than <e2>six metres</e2> should have fully modulating burner controls.,greater,synthetic
+d504fd87-d13d-4936-9d7a-71d17954760d_9,,,The <e1>air distribution</e1> of the steps in an exit may be no more than <e2>certain proportion</e2>.,less-equal,synthetic
+9618a274-45da-4e3e-87f0-21c2bfae4a8e_5,,,"A guardrail must be used at points with a <e1>minimum value</e1> of over <e2>100 millimetres</e2>, if these can be accessed by children.",greater,synthetic
+41d06a37-5039-4dc0-aae1-0fe3abbd84fc,The building fabric should be constructed so that the insulation is reasonably continuous across newly built elements.,{'ID': '132_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>building fabric</e1> should be <e2>constructed</e2> so that the insulation is reasonably continuous across newly built elements.,necessity,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",{'ID': '84_Finnish_Health-IndoorClimateAndVentilation'},"If the air flows of <e1>extract air categories</e1> 1 and <e2>2</e2> are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,annotated
+9618a274-45da-4e3e-87f0-21c2bfae4a8e_11,,,"A guardrail must be used at points with a <e1>rate of heat release</e1> of over <e2>3</e2>, if these can be accessed by children.",greater,synthetic
+2ff58135-b89d-40d1-a145-51aad9e5a942_3,,,"The landing in front of the outside door shall be at least <e1>15mm</e1> <e2>heat emission capacity</e2> and at least 1,500 millimetres long.",greater-equal,synthetic
+eccd4f77-ef4a-41fd-a22a-620c84fdddd4,There is a minimum of 400mm of worktop to at least one side of the oven and fridge or fridge freezer where this is taller than the worktop height (or to one side of a pair of tall appliances where they are located together at the end of a run).,{'ID': '98_UK_DocM_V1_AccessAndUseOfBuildings'},There is a minimum of 400mm of worktop to at least one side of the oven and fridge or fridge freezer where this is taller than the worktop height (or to one side of a <e1>pair of</e1> <e2>tall</e2> appliances where they are located together at the end of a run).,none,annotated
+d988e207-c3f9-4314-9a16-f99b334595f4_8,,,The <e1>Manual control</e1> must be no less than <e2>twice the rise plus the going (2R G)</e2>.,greater-equal,synthetic
+23cff3c3-1251-4c5f-9fd9-8f52d25eb494_4,,,Gasfired boilers and multi-stage oilfired boilers with an <e1>sum</e1> of more than <e2>0.3</e2> should have fully modulating burner controls.,greater,synthetic
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_1,,,"The wall ties should have a horizontal spacing of 900mm and a vertical spacing of 450mm, or alternatively should be spaced such that the <e1>riser</e1> is not less than <e2>3.3m</e2>.",greater-equal,synthetic
+4f2b56cb-9852-4406-bbea-31f426fb4910,"replacing a heating system including the heating appliance, pipework and heat emitters), the energy performance of the whole system should be assessed, and the results documented and handed over to the building owner with the manufacturers supporting literature.",{'ID': '397_UK_DocM_V2_AccessAndUseOfBuildings'},"replacing a <e1>heating system</e1> including the heating appliance, <e2>pipework</e2> and heat emitters), the energy performance of the whole system should be assessed, and the results documented and handed over to the building owner with the manufacturers supporting literature.",selection,annotated
+83344b26-7cf0-452a-9dac-c0288c46393d,"The non-primary doors for entering a dwelling (for example, back door or garage inter-connecting doors) should be fitted with a multipoint locking system that meets the requirements of: PAS 3621 (key locking on both sides), or PAS 8621 (non-key locking on the internal face), or PAS 10621 (non-key locking on the internal face, but with an external locking override facility).",{'ID': '37_UK_DocQ_Security_Dwellings'},"The non-primary <e1>doors</e1> <e2>for entering a dwelling</e2> (for example, back door or garage inter-connecting doors) should be fitted with a multipoint locking system that meets the requirements of: PAS 3621 (key locking on both sides), or PAS 8621 (non-key locking on the internal face), or PAS 10621 (non-key locking on the internal face, but with an external locking override facility).",selection,annotated
+86831830-e7f0-4b90-aa27-dc0542b7ba4d_10,,,"If a residential block of flats does not have a lift, the stairs between floor levels must have natural light and at least <e1>1,200 millimetres</e1> <e2>span</e2>.",greater-equal,synthetic
+a477ee34-044e-443b-a95f-fbb1da913c38,"Changing places toilets, facilities designed for individuals with complex and multiple impairments who may require the assistance of up to two assistants, should be provided in addition to any wheelchair-accessible accommodation in separate-sex toilet washrooms, wheelchair-accessible unisex toileting facilities and baby changing facilities.",{'ID': '160_UK_DocM_V2_AccessAndUseOfBuildings'},"Changing places toilets, facilities designed for individuals with complex and multiple impairments who may require the assistance of up to two assistants, should be provided in addition to any wheelchair-accessible accommodation in separate-sex toilet <e1>washrooms</e1>, wheelchair-accessible unisex toileting facilities and <e2>baby changing facilities</e2>.",none,annotated
+f2516477-0c54-4192-9a7a-7bf8755f57e9,"The water meter of a property shall be located in a place where it is easy to install, read and service and where it cannot freeze.",{'ID': '73_Finnish_Health-WaterAndSewerage'},"The <e1>water meter</e1> of a property shall be <e2>located in a place where it is easy to install, read and service and where it cannot freeze</e2>.",necessity,annotated
+f5a71c7b-e852-40f2-8f88-91cda7902a7e_0,,,"If a new building has a space heating or airconditioning system with an <e1>shallow projecting</e1> greater than <e2>1m2</e2>, a building automation and control system should be installed.",greater,synthetic
+75c60084-6878-472d-8694-e8739e0dd76c_1,,,The width of access routes in assembly areas with a <e1>quality of the installation</e1> of <e2>8 per cent (1:12.5)</e2> must be at least 900 millimetres.,equal,synthetic
+8e8f4fb5-00b5-404f-89df-a07287984748_4,,,"In buildings with a <e1>level differences</e1> greater than <e2>100</e2>, automatic meter reading and data collection facilities should be installed.",greater,synthetic
+203faa23-7b71-47c9-a6e5-2333ac45389e_10,,,"The <e1>stairs</e1> of the indoor steps of dwelling units and living quarters may be no more than <e2>32mm</e2>, and the tread must be no less than 250 millimetres.",less-equal,synthetic
+51517a5d-dd11-41b9-b44b-36d87b959127,The presence of the door should be apparent not only when it is shut but also when it is open.,{'ID': '77_UK_DocM_V2_AccessAndUseOfBuildings'},The presence of the door should be apparent not only when <e1>it</e1> is shut but also when <e2>it</e2> is open.,none,annotated
+86831830-e7f0-4b90-aa27-dc0542b7ba4d_11,,,"If a residential block of flats does not have a lift, the stairs between floor levels must have natural light and at least <e1>900 millimetres</e1> <e2>operation</e2>.",greater-equal,synthetic
+3f7c10d1-d801-4351-bc85-187cf8cffeb3,The water vapour resistance and air tightness of external walls and their various layers as well as the structures attached to the external wall and joints to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,{'ID': '96_Finnish_Health-Humidity'},The <e1>water vapour resistance</e1> and air tightness of external <e2>walls</e2> and their various layers as well as the structures attached to the external wall and joints to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,part-of,annotated
+77f993c6-dff1-4f9a-8f66-73221d3cbaff_11,,,"If the dwelling only has <e1>20mm</e1> <e2>sanitary accommodation</e2>, a minimum ventilation rate of 13l/s should be used.",equal,synthetic
+76bf63bd-30f4-440d-81a0-61ca16170f70_5,,,Control should be maximised and heat gain to uninsulated pipes should only be permitted where the <e1>thick</e1> is less than <e2>8.5m2</e2> of the total load.,less,synthetic
+f72a98f3-b7d2-4633-b244-0d7242dfb0c9_11,,,Every single bedroom has a minimum <e1>room temperature</e1> of <e2>100 millimetres</e2> and is at least 2.4m wide.,greater-equal,synthetic
+e8340500-38b6-461b-b00d-d3aa44ac1f0b_4,,,The <e1>alongside the leading edge</e1> of the water available from the hot water system may not exceed <e2>adequate means</e2>.,less-equal,synthetic
+77f993c6-dff1-4f9a-8f66-73221d3cbaff_1,,,"If the dwelling only has <e1>120</e1> <e2>lead boiler</e2>, a minimum ventilation rate of 13l/s should be used.",equal,synthetic
+19478a13-7457-4dd3-a394-744f826db7b0_3,,,"The handle to at least <e1>650mm</e1> <e2>gaps</e2> in the principal living area is 700-1000mm above floor level, unless fitted with a remote opening device that is within this height range.",greater-equal,synthetic
+710ef992-e187-4b1a-894b-e0e222f54359_6,,,"NOTE: For grid-supplied electricity, a <e1>total number</e1> of <e2>8.5m2</e2> and primary energy factor of 1.501kWhPE/kWh should be used.",equal,synthetic
+fac44f87-4eb9-4f56-998c-74efa9512309,"If air barriers or vapour barriers have been used in the structure, the seams, edges and penetrations must be tight.",{'ID': '106_Finnish_Health-Humidity'},"If air barriers or vapour barriers have been used in the structure, the seams, edges and <e1>penetrations</e1> must be <e2>tight</e2>.",necessity,annotated
+45b99da0-5bce-49b7-9ce2-04810c7e5a19,"For recessed meter boxes on the cold side of the construction, insulation should be installed behind the enclosure.",{'ID': '151_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For recessed meter boxes on the cold side of the construction, <e1>insulation</e1> should be <e2>installed behind the enclosure</e2>.",necessity,annotated
+94c0e823-a61d-49d6-82b3-4ca96f65dfa4,The buildings surfaces and lighting must be such that they achieve the contrasts in brightness needed for observation.,{'ID': '64_Finnish_SafetyOfUse'},The buildings <e1>surfaces</e1> and lighting must be such that they <e2>achieve the contrasts in brightness needed for observation</e2>.,necessity,annotated
+7d877df3-9aa7-4dff-a64d-5356a66c944d_10,,,"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a <e1>design temperature difference</e1> exceeding <e2>0.15</e2> and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",greater,synthetic
+88e23b46-22d9-4be6-87b7-40541f7995a9_5,,,"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the <e1>calculation of primary energy and CO2 emissions</e1> exceeds <e2>100 litres</e2>; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",greater,synthetic
+2ff58135-b89d-40d1-a145-51aad9e5a942_1,,,"The landing in front of the outside door shall be at least <e1>7 mg/m3 (6 ppm)</e1> <e2>protection</e2> and at least 1,500 millimetres long.",greater-equal,synthetic
+20518e80-6f7e-457f-8c5a-59fa4c0eb324,"When calculating the heat loss for a buildings design solution, the design value shall be used as the value of the air leakage rate figure for the building envelope.",{'ID': '137_Finnish_EnergyEfficiency'},"When calculating the heat loss for a <e1>buildings</e1> design solution, the design value shall be used as the value of the air leakage rate figure for the <e2>building</e2> envelope.",none,annotated
+d342429e-d3fc-46e0-a195-527cfef1fd4b,"When an existing building with a total useful floor area of over 1000m2 is being extended or the habitable area is being increased, consequential improvements should be installed.",{'ID': '451_UK_DocM_V2_AccessAndUseOfBuildings'},"When an existing <e1>building</e1> with a total useful <e2>floor area</e2> of over 1000m2 is being extended or the habitable area is being increased, consequential improvements should be installed.",part-of,annotated
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_5,,,"The wall ties should have a <e1>frequency</e1> of <e2>55 degrees Celsius</e2> and a vertical spacing of 450mm, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",equal,synthetic
+f0c72b35-5a0a-4554-8713-96f6f73a67f1_6,,,A cube with <e1>primary energy factor</e1> of no more than <e2>18 dm3/s</e2> may pass between the lower edge of a barriers protective part and the landing or the upper surface or edge of a step.,less-equal,synthetic
+77be05f2-cd8c-4d35-85e4-6637b999d8e7,The value of the consequential improvement works should not be less than 10 of the value of the principal works.,{'ID': '452_UK_DocM_V2_AccessAndUseOfBuildings'},The value of the consequential improvement works should not be less than <e1>10</e1> of the <e2>value</e2> of the principal works.,selection,annotated
+ef4f54b6-1099-4404-9fa2-d0c0d5e55543_9,,,The <e1>location</e1> must not exceed the individual dwellings <e2>selection</e2>.,less-equal,synthetic
+11f2902d-29c2-474e-97d0-628a2a97a666,"Level differences of over 500 millimetres must be equipped with an appropriate safety barrier, railing or handrail.",{'ID': '109_Finnish_SafetyOfUse'},"<e1>Level differences</e1> of over <e2>500 millimetres</e2> must be equipped with an appropriate safety barrier, railing or handrail.",greater,annotated
+079db365-cfed-474e-9329-25349ac0db4a_2,,,"In connection with the door of an outside space of an individual dwelling the <e1>boiler type</e1> outside the door may be more than <e2>100 litres</e2> if the level difference can, with reasonable effort, be eliminated with equipment in the outdoor space.",greater,synthetic
+3724fd47-22f7-432c-81a2-1abcb95c7df2,"The total number of ventilators installed in a dwellings habitable rooms and kitchens should be no fewer than five, except in one bedroom properties, where there should be no fewer than four.",{'ID': '96_UK_DocF_V1_Ventilation'},"The <e1>total number of ventilators</e1> installed in a dwellings habitable rooms and kitchens should be no fewer than <e2>five</e2>, except in one bedroom properties, where there should be no fewer than four.",greater-equal,annotated
+5ca184fa-e100-4f97-957d-e37ae944786f_5,,,The <e1>domestic  hot  water cylinder heat loss</e1> of installing electric vehicle charge points and cable routes is not more than <e2>0.7W/(m2K)</e2> of the total capital cost of the major renovation.,less-equal,synthetic
+74002ed3-548e-4e2f-8835-be76e643c67d_2,,,NOTE 2: Double doors effectively provide nibs where each leaf is at least <e1>400 millimetres</e1> <e2>configuration</e2>.,greater-equal,synthetic
+bde1697a-20c9-4f15-a63c-5be323a058c1_7,,,"Any connection of <e1>1,000 millimetres</e1> or more <e2>sinks</e2> to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.",greater-equal,synthetic
+339fc78c-a2f2-481c-a410-3aeb41e24b8a_1,,,Solid walls constructed of coursed brickwork or blockwork should be at least as <e1>feasibility of installing high-efficiency alternative systems</e1> as <e2>1.501kWhPE/kWh</e2> of the storey height.,greater-equal,synthetic
+2afa8bba-b5ad-4e12-bc27-4beea3fd09b2_5,,,The normal relationship between the dimensions of the rise and going is: <e1>proportion</e1> equals <e2>three metres</e2>.,equal,synthetic
+5e51b653-449e-4d00-be19-0e20ecff5c49_1,,,The default <e1>that</e1> should be <e2>50 millimetres</e2>.,equal,synthetic
+74002ed3-548e-4e2f-8835-be76e643c67d_0,,,NOTE 2: Double doors effectively provide nibs where each leaf is at least <e1>half a metre</e1> <e2>energy efficiency</e2>.,greater-equal,synthetic
+2032e456-bf80-4342-90dc-0da164e00a9a,A unit that contains both living accommodation and space for commercial purposes (e.g. for a workshop or office) should be treated as a dwelling if the commercial part can be reverted to domestic use.,{'ID': '7_UK_DocF_V1_Ventilation'},A unit that contains both <e1>living accommodation</e1> and space for commercial purposes (e.g. for a workshop or office) should be treated as a dwelling if the <e2>commercial part</e2> can be reverted to domestic use.,none,annotated
+46f5be2a-1514-420b-bc39-331fc6e0d2df_7,,,"The dwelling primary energy rate, <e1>rated speed</e1> and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the target primary energy rate, <e2>total number of ventilators</e2> and target fabric energy efficiency rate, respectively.",less-equal,synthetic
+3e9fc57e-bc69-4f17-a056-dd7767afa9bb_11,,,"If the <e1>limits</e1> of the building does not exceed <e2>0.3</e2>, access to the attic fire compartments from the outside shall be required.",less-equal,synthetic
+0da52584-1b37-48b5-840f-3795ae695275_10,,,the minimum clear dimensions of the platform are: 1100mm wide and <e1>90</e1> <e2>control function</e2> where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+f7935bb4-9e5f-4e91-bbf1-54e45c1ef24c_0,,,A building with a <e1>lengths</e1> exceeding <e2>18 dm3/s</e2> must be equipped with anchoring structures for safety lines.,greater,synthetic
+f7cfdf57-28f3-4d23-90bf-ec2268e14bac,"Ramps, steps, thresholds and differences in levels in passageways must be clearly indicated using lighting and surface brightness contrasts or warning signs.",{'ID': '65_Finnish_SafetyOfUse'},"Ramps, steps, thresholds and differences in <e1>levels</e1> in <e2>passageways</e2> must be clearly indicated using lighting and surface brightness contrasts or warning signs.",selection,annotated
+8719164e-370a-42f2-9240-0a1b8db1a2c7,Extensive voids must be partitioned in order to restrict the spread of fire.,{'ID': '129_Finnish_FireSafety'},Extensive <e1>voids</e1> must be <e2>partitioned</e2> in order to restrict the spread of fire.,necessity,annotated
+bfdf95da-d422-47cd-83d7-a30a4969f2e6_10,,,"If the internal ties must be centred on the supporting line, the minimum value of the <e1>patterns</e1>, <e2>1,000 millimetres</e2>, will also be applied to internal ties.",greater-equal,synthetic
+5b4380ba-0066-4735-a362-316d4c8e70b2_3,,,"Where a building undergoing major renovation, which is not a residential building or a mixeduse building, will have more than <e1>180kW</e1> <e2>shower rooms</e2> after the major renovation is completed (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.",greater,synthetic
+baee716c-b8c2-4500-b4de-63fa11f007b1_0,,,A minimum of <e1>certain proportion</e1> in five of the remaining <e2>residential block of flats</e2> must have access to cable routes.,greater-equal,synthetic
+20216261-f56d-4f79-8a46-c781abe19f04,"For new and existing buildings other than dwellings, information should be provided in a new or existing building log book.",{'ID': '98_UK_DocF_V2_Ventilation'},"For new and existing <e1>buildings</e1> <e2>other than dwellings</e2>, information should be provided in a new or existing building log book.",selection,annotated
+984c252b-74f4-4d85-9080-1c8ae1851eca,"If performance requires thicker glass to be used, an equivalent window unit with standard thickness (6mm) glazing should be shown to meet the required standard.",{'ID': '113_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If <e1>performance</e1> requires thicker glass to be used, an <e2>equivalent</e2> window unit with standard thickness (6mm) glazing should be shown to meet the required standard.",none,annotated
+f733b7c9-a406-4f5a-b383-9d3f8b70a559,The selection of relevant critical situations for design should be made reflecting the conditions that can reasonably be foreseen during future use.,{'ID': '5_UK_DocA_Structure'},The <e1>selection</e1> of <e2>relevant</e2> critical situations for design should be made reflecting the conditions that can reasonably be foreseen during future use.,none,annotated
+72e7ed0c-9e73-46b2-a919-20f3fea337fd_4,,,"An <e1>WC accommodation</e1> with a potentially flammable or explosive atmosphere must not be located in a <e2>doors</e2> where there are dwellings, accommodation premises, institutions or assembly and business premises.",not-part-of,synthetic
+6a41a473-bd3c-4e38-a093-094b3fdae388_6,,,At least one in every <e1>230mm</e1> remaining <e2>heating appliance</e2> must be provided with cable routes.,equal,synthetic
+596cc55c-f50f-4155-962f-832b87226a8e,"For mechanical ventilation systems, fan units should be appropriately sized so that fans operating in normal background ventilation mode are not overly noisy.",{'ID': '23_UK_DocF_V1_Ventilation'},"For mechanical ventilation systems, fan units should be <e1>appropriately sized</e1> so that <e2>fans</e2> operating in normal background ventilation mode are not overly noisy.",selection,annotated
+73a6e4e0-c157-4cae-bc28-c0788f6a1e53,"Activation (e.g. motion sensors and push buttons), safety features and the time-lapse allowed for entry and exit through powered door systems should be carefully considered to suit the needs of people who cannot react quickly.",{'ID': '73_UK_DocM_V2_AccessAndUseOfBuildings'},"Activation (e.g. motion sensors and push buttons), <e1>safety features</e1> and the time-lapse allowed for entry and <e2>exit</e2> through powered door systems should be carefully considered to suit the needs of people who cannot react quickly.",part-of,annotated
+8b054fa5-fa6b-40f8-996a-a6dfea855fc3_4,,,"The <e1>axle group load</e1> between a door that opens onto a landing and the upper edge of the ramp or flight of stairs must be no less than <e2>220 millimetres</e2> on the side wall and no less than 1,500 millimetres on the end wall.",greater-equal,synthetic
+42f29765-356f-4d9c-9a73-bc99e7044e07,"People with mobility impairments who arrive as passengers should be able to alight from a vehicle close to the principal entrance, or alternative accessible entrance, of the building in a way that is convenient for entry into the building.",{'ID': '47_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>People</e1> with mobility impairments who arrive as passengers should be able to <e2>alight from a vehicle close to the principal entrance, or alternative accessible entrance, of the building</e2> in a way that is convenient for entry into the building.",necessity,annotated
+c0abe869-e87e-4e66-a8ca-8578a338b07a,"Where a building automation and control system is installed, its control capabilities should be appropriate for the building, its expected usage and the building services specification.",{'ID': '329_UK_DocM_V2_AccessAndUseOfBuildings'},"Where a <e1>building automation and control system</e1> is <e2>installed</e2>, its control capabilities should be appropriate for the building, its expected usage and the building services specification.",selection,annotated
+3724fd47-22f7-432c-81a2-1abcb95c7df2_4,,,"The total number of ventilators installed in a dwellings habitable rooms and kitchens should be no fewer than five, except in <e1>B</e1> <e2>extract fan</e2> properties, where there should be no fewer than four.",equal,synthetic
+d925c189-860a-4fcb-ae88-d1cf8cc14fb8_8,,,"The <e1>edges</e1> of steps in covered or heated outdoor staircases must be no less than <e2>20 degrees Celsius</e2>, and the riser may be no more than 160 millimetres.",greater-equal,synthetic
+d30364dd-539e-4351-9d53-89ad358a4b44,"U-values for rooflights or rooflight-and-kerb assemblies should be based on the outer developed surface area, which is often greater than the area of the roof opening.",{'ID': '122_UK_DocL_V1_ConsrvationOfFuelAndPower'},"<e1>U-values</e1> for rooflights or <e2>rooflight-and-kerb assemblies</e2> should be based on the outer developed surface area, which is often greater than the area of the roof opening.",part-of,annotated
+710ef992-e187-4b1a-894b-e0e222f54359_8,,,"NOTE: For grid-supplied electricity, a <e1>total useful floor area</e1> of <e2>300 litres</e2> and primary energy factor of 1.501kWhPE/kWh should be used.",equal,synthetic
+37f30855-f103-43f1-aef2-b37c05b4c174,Facilitating future connection to any local district heat networks should be considered (e.g. providing capped off connections in pipework to allow later connection to a local district heat network).,{'ID': '232_UK_DocL_V1_ConsrvationOfFuelAndPower'},Facilitating future connection to any <e1>local</e1> <e2>district heat networks</e2> should be considered (e.g. providing capped off connections in pipework to allow later connection to a local district heat network).,selection,annotated
+703e5c71-bd54-4267-acf4-fa7db1e70d49,"Any sound system in an auditorium, a restaurant, a conference facility, a facility for festive occasions, a teaching facility or other similar assembly facility or a public service facility shall have an induction loop or a similar sound transmission system.",{'ID': '67_Finnish_Accessibility'},"Any sound system in an auditorium, a restaurant, a conference facility, a <e1>facility for festive occasions</e1>, a <e2>teaching facility</e2> or other similar assembly facility or a public service facility shall have an induction loop or a similar sound transmission system.",none,annotated
+fac44f87-4eb9-4f56-998c-74efa9512309,"If air barriers or vapour barriers have been used in the structure, the seams, edges and penetrations must be tight.",{'ID': '106_Finnish_Health-Humidity'},"If <e1>air barriers</e1> or vapour barriers have been used in the structure, the seams, edges and <e2>penetrations</e2> must be tight.",none,annotated
+05fdde92-d8af-42ad-963b-9019c69a8ab3,"For a timber frame where the intermediate floor structure breaches the external wall insulation, further insulation of the same thickness as the insulation used in the external wall should be included within the depth of the intermediate floor structure.",{'ID': '163_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For a timber frame where the intermediate floor structure breaches the external wall insulation, further <e1>insulation</e1> of the same <e2>thickness</e2> as the insulation used in the external wall should be included within the depth of the intermediate floor structure.",part-of,annotated
+17fba530-c42b-4eeb-85dd-16da0bacc49c,"Areas that are not enclosed, such as open floors, covered ways and balconies, should be excluded.",{'ID': '470_UK_DocL_V1_ConsrvationOfFuelAndPower'},"<e1>Areas</e1> that are <e2>not enclosed</e2>, such as open floors, covered ways and balconies, should be excluded.",selection,annotated
+cea6e7bd-c494-4146-9f81-3fd2ed64a2a6_3,,,The <e1>efficiency</e1> of the floor surface in the seating area and access route may not exceed <e2>32mm</e2>.,less-equal,synthetic
+3153d771-404e-4a54-ac05-ed1b75e37506_9,,,"Gangways should not be less than 1100mm <e1>travel distance</e1> unless used by not more than 50 persons, in which case gangways should be a minimum of <e2>2,100 millimetres</e2>.",greater-equal,synthetic
+f7935bb4-9e5f-4e91-bbf1-54e45c1ef24c_6,,,A building with a <e1>impact</e1> exceeding <e2>0.8 metres</e2> must be equipped with anchoring structures for safety lines.,greater,synthetic
+bb9ec292-062b-43c3-8590-856dd5f6b890_6,,,"The <e1>anthracite figure</e1> and building emission rate calculated using the measured air permeability must not be higher than the <e2>Air permeability</e2> and target emission rate, respectively.",less-equal,synthetic
+8364a5f1-f80e-484c-9f38-bffc6f4c1876,"Where communal parking is provided to blocks of flats, at least one standard parking bay is provided close to the communal entrance of each core of the block (or to the lift core where the parking bay is internal).",{'ID': '44_UK_DocM_V1_AccessAndUseOfBuildings'},"Where communal parking is provided to blocks of flats, at least <e1>one</e1> standard <e2>parking bay</e2> is provided close to the communal entrance of each core of the block (or to the lift core where the parking bay is internal).",greater-equal,annotated
+aa41a5d4-c0b1-4da7-84a0-5c2e2738654f_11,,,The total number of ventilators installed in the dwellings habitable rooms and kitchens should be at least the following: Five ventilators if the dwelling has more than <e1>20 litres per second</e1> <e2>Linear interpolation</e2>.,greater,synthetic
+e320322e-3aee-4167-ad19-a6c6cc41f597,The water system shall incorporate: 1) a pressure gauge; 2) thermometers in the water pipe of mixed domestic hot water from the water heater and in the domestic hot water ring duct to measure the temperature of return water; 3) throttling valves.,{'ID': '97_Finnish_Health-WaterAndSewerage'},The water system shall incorporate: 1) a pressure gauge; 2) <e1>thermometers</e1> in the water pipe of mixed domestic hot water from the water heater and in the domestic hot water ring duct to <e2>measure the temperature of return water</e2>; 3) throttling valves.,selection,annotated
+360bc9ab-1ae1-44f0-a6a3-c1110edac6a9,The annual energy savings should be estimated using the National Calculation Methodology Modelling Guide.,{'ID': '465_UK_DocM_V2_AccessAndUseOfBuildings'},The annual <e1>energy savings</e1> should be <e2>estimated using the National Calculation Methodology Modelling Guide</e2>.,necessity,annotated
+4470dde4-6422-4c13-9781-de68c3e075dc,"The outdoor air flow of a dwelling unit, however, shall be designed to be a minimum of 18 dm3/s.",{'ID': '54_Finnish_Health-IndoorClimateAndVentilation'},"The outdoor air flow of a <e1>dwelling unit</e1>, however, shall be designed to be a minimum of <e2>18 dm3/s</e2>.",none,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",{'ID': '83_Finnish_SafetyOfUse'},"The free <e1>opening</e1> of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the <e2>sum</e2> of these must be at least 1,500 millimetres.",part-of,annotated
+ef4f54b6-1099-4404-9fa2-d0c0d5e55543_10,,,The <e1>thresholds</e1> must not exceed the individual dwellings <e2>gradient</e2>.,less-equal,synthetic
+01008f69-874b-443e-bcb2-2f5630280049_6,,,"If stairs are used only as an emergency exit and if they lead to spaces in a dwelling or accommodation facility other than those that are necessary for living, the <e1>air tightness</e1> may be no more than <e2>1,200 MJ/m2</e2> and the tread must be no less than 220 millimetres.",less-equal,synthetic
+5b4380ba-0066-4735-a362-316d4c8e70b2,"Where a building undergoing major renovation, which is not a residential building or a mixeduse building, will have more than 10 parking spaces after the major renovation is completed (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.",{'ID': '73_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where a building undergoing major renovation, which is not a residential building or a mixeduse building, will have more than <e1>10</e1> parking spaces after the major renovation is completed (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be <e2>installed in a minimum of one fifth of the total number of remaining parking spaces</e2>.",none,annotated
+526d7a82-6362-4fce-8d58-1ab0b0005235,The structures of the wet rooms must be rigid enough that the thermal and moisture movements do no damage the wet room waterproofing or surface structures.,{'ID': '115_Finnish_Health-Humidity'},The <e1>structures</e1> of the <e2>wet rooms</e2> must be rigid enough that the thermal and moisture movements do no damage the wet room waterproofing or surface structures.,part-of,annotated
+3121fe90-27db-405e-a42a-df3cd22ee176_5,,,"Where necessary, <e1>0.15</e1><e2>Window handles</e2>, one above the other, must be installed in order to take into account children and users of wheelchairs.",equal,synthetic
+c0a6d35c-cc20-428b-941d-c3e3e6365c74_3,,,"In a tier that is uninterrupted by cross-gangways, and where the pitch exceeds 25, use a <e1>installed over unheated rooms</e1> number of steps of <e2>01:08:00</e2>.",equal,synthetic
+7c44934c-61e1-4904-a493-1aa360ccc7d1,"The building shall be constructed so that the combined dead,imposed and wind loads are sustained and transmitted by it to the ground: (a) safely; and (b) without causing such deflection or deformation of any part of the building, or such movement of the ground, as will impair the stability of any part of another building.",{'ID': '1_UK_DocA_Structure'},"The building shall be <e1>constructed</e1> so that the combined dead,imposed and wind loads are sustained and transmitted by it to the ground: (a) <e2>safely</e2>; and (b) without causing such deflection or deformation of any part of the building, or such movement of the ground, as will impair the stability of any part of another building.",none,annotated
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3_0,,,"Where the <e1>U-values</e1> of installing only cable routes is more than <e2>two</e2> of the total cost of the major renovation, there is no requirement to install either electric vehicle charge points or cable routes.",greater,synthetic
+1e0aa8d6-4291-4a33-883c-b88453c83287,"To correctly assess whether an element meets the limiting U-value, the U-value must be calculated for the element in the appropriate plane either horizontal or vertical.",{'ID': '128_UK_DocM_V2_AccessAndUseOfBuildings'},"To correctly assess whether an <e1>element</e1> <e2>meets the limiting U-value</e2>, the U-value must be calculated for the element in the appropriate plane either horizontal or vertical.",selection,annotated
+5577528f-8fa0-4ca3-96f6-ea418091cb86,The side edges of stairs and landings must be fitted with a raised camber to prevent slipping over the edge if a cube measuring more than 50 millimetres in width is able to pass through the opening between the plane level and the handrail or wall.,{'ID': '32_Finnish_SafetyOfUse'},The side edges of stairs and landings must be fitted with a raised camber to prevent slipping over the edge if a cube measuring more than <e1>50 millimetres</e1> in <e2>width</e2> is able to pass through the opening between the plane level and the handrail or wall.,greater,annotated
+aa41a5d4-c0b1-4da7-84a0-5c2e2738654f,The total number of ventilators installed in the dwellings habitable rooms and kitchens should be at least the following: Five ventilators if the dwelling has more than one bedroom.,{'ID': '89_UK_DocF_V1_Ventilation'},The total number of ventilators installed in the <e1>dwellings</e1> habitable rooms and <e2>kitchens</e2> should be at least the following: Five ventilators if the dwelling has more than one bedroom.,part-of,annotated
+f36650d9-cd31-4795-9728-7a4dcf3cadde,"Dwellings, accommodation premises, institutions, day-care institutions, day-care centres and other early childhood education premises and schools must be provided with an appropriate system that gives a warning at an early stage of a beginning fire.",{'ID': '229_Finnish_FireSafety'},"Dwellings, accommodation premises, institutions, day-care institutions, <e1>day-care centres</e1> and other early childhood education premises and schools must be provided with an appropriate <e2>system that gives a warning at an early stage of a beginning fire</e2>.",necessity,annotated
+4094b859-b3b4-4035-94cd-8cf47ccbd801,The load capacity is at least 400kg.,{'ID': '23_UK_DocM_V1_AccessAndUseOfBuildings'},The <e1>load capacity</e1> is at least <e2>400kg</e2>.,greater-equal,annotated
+ee0c8c7c-c65e-4403-92e6-628fd680f3bf_2,,,Any panel within the doorset should be at least <e1>390 millimetres</e1> <e2>condition</e2>.,greater-equal,synthetic
+c33e482e-252a-4e99-a905-7861a480d024,"Geo-location should be enabled to confirm the location, date and time of each image.",{'ID': '484_UK_DocL_V1_ConsrvationOfFuelAndPower'},"<e1>Geo-location</e1> should be enabled to confirm the location, date and time of each <e2>image</e2>.",necessity,annotated
+bf798097-bb99-42d0-a73f-8cebab8fbeb8_5,,,"In the entrance halls and other indoor areas of administrative, service and business premises and in assembly areas, the riser of the steps must be no more than 160 millimetres and the <e1>opening</e1> must be no less than <e2>three seconds</e2>.",greater-equal,synthetic
+ca1e0369-2dfe-4cf2-8194-87f72ee5a633,"Vertical, horizontal and slinky ground arrays in particular should be flushed in both directions.",{'ID': '385_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Vertical, horizontal and slinky <e1>ground arrays</e1> in particular should be <e2>flushed in both directions</e2>.",necessity,annotated
+2de867fe-80e7-4617-ad18-36225dd45ab1_2,,,Hinged or pivot windows with an <e1>energy performance</e1> of less than <e2>2.4m</e2> are not suitable for purge ventilation.,less,synthetic
+12e545d1-64f4-45c9-a520-5b8a003eba0a_0,,,"If the dwelling has more than <e1>E 15</e1> exposed <e2>bathroom</e2>, the area of background ventilators on each facade should be similar, to allow cross-ventilation.",greater,synthetic
+a2f3a871-91d5-4777-95c9-4744792b3a69,"in an existing building, for the principal or main staff entrance or entrances to be accessible, an alternative accessible entrance should be provided.",{'ID': '61_UK_DocM_V2_AccessAndUseOfBuildings'},"in an existing building, for the principal or <e1>main staff</e1> <e2>entrance</e2> or entrances to be accessible, an alternative accessible entrance should be provided.",selection,annotated
+4fc3b5b1-a838-4429-b385-d8e80e6633eb,"In the absence of relevant harmonised European Standards, products with a travel exceeding 3m must have a product certificate issued by a Notified Body.",{'ID': '117_UK_DocM_V2_AccessAndUseOfBuildings'},"In the absence of <e1>relevant</e1> harmonised <e2>European Standards</e2>, products with a travel exceeding 3m must have a product certificate issued by a Notified Body.",selection,annotated
+aac9b625-4f6b-42e6-b657-2accd6054607,Heating systems for screed floors that are greater than 65mm thick should automatically reduce the room temperature at night or when the room is unoccupied.,{'ID': '299_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Heating systems</e1> for screed floors that are greater than 65mm thick should <e2>automatically reduce the room temperature at night or when the room is unoccupied</e2>.,necessity,annotated
+ef4f54b6-1099-4404-9fa2-d0c0d5e55543_11,,,The <e1>U-values</e1> must not exceed the individual dwellings <e2>prevailing wind direction</e2>.,less-equal,synthetic
+86831830-e7f0-4b90-aa27-dc0542b7ba4d,"If a residential block of flats does not have a lift, the stairs between floor levels must have natural light and at least one intermediate landing.",{'ID': '18_Finnish_SafetyOfUse'},"If a residential block of flats does not have a lift, the stairs between floor levels must have natural light and at least <e1>one</e1> <e2>intermediate landing</e2>.",greater-equal,annotated
+16f6f10e-f32f-48b2-85f9-123cdb5448ee,Any unavoidable gaps between boards should be infilled using compressible tape (e.g. for boards within roof rafters) or low expansion foam (e.g. for boards within wall cavities).,{'ID': '147_UK_DocL_V1_ConsrvationOfFuelAndPower'},Any <e1>unavoidable</e1> gaps <e2>between boards</e2> should be infilled using compressible tape (e.g. for boards within roof rafters) or low expansion foam (e.g. for boards within wall cavities).,none,annotated
+dae0db09-fd4b-4f2c-99c0-cd742b19d17a,"A glass structure or other light-permeable structure, along with its mountings, must withstand the load to which it is normally subject, unless the structure is protected by a fixed collision barrier.",{'ID': '68_Finnish_SafetyOfUse'},"A glass structure or other <e1>light-permeable structure</e1>, along with its mountings, must <e2>withstand the load to which it is normally subject</e2>, unless the structure is protected by a fixed collision barrier.",necessity,annotated
+7d877df3-9aa7-4dff-a64d-5356a66c944d,"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a width exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",{'ID': '59_Finnish_SafetyOfUse'},"In <e1>public</e1> outdoor and indoor spaces, and in <e2>business</e2> and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a width exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",none,annotated
+26980508-105c-49db-8595-bf001a48d757,"In rooms with no fixed seats or furnishings, the number of persons shall be calculated to be two persons per square metre.",{'ID': '103_Finnish_SafetyOfUse'},"In rooms with no <e1>fixed</e1> <e2>seats</e2> or furnishings, the number of persons shall be calculated to be two persons per square metre.",selection,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479,Individual flights are: for gradients up to 1:15 not more than 10m long; for gradients up to 1:12 not more than 5m long.,{'ID': '18_UK_DocM_V1_AccessAndUseOfBuildings'},Individual flights are: for <e1>gradients</e1> up to 1:15 not more than 10m long; for gradients up to 1:12 not more than 5m <e2>long</e2>.,none,annotated
+6e61f4b0-ddc1-44cb-9966-0e146933d032,"Where a separate-sex toilet washroom can be accessed by wheelchair users, it should be possible for them to use both a urinal, where appropriate, and a washbasin at a lower height than is provided for other users.",{'ID': '171_UK_DocM_V2_AccessAndUseOfBuildings'},"Where a separate-sex <e1>toilet washroom</e1> can be <e2>accessed by wheelchair users</e2>, it should be possible for them to use both a urinal, where appropriate, and a washbasin at a lower height than is provided for other users.",selection,annotated
+09e6b265-5610-4917-ac32-6b2c8f144fd6,"Windows, skylights and ventilators which can be opened by people in or about the building shall be so constructed or equipped that they may be opened, closed or adjusted safely.",{'ID': '107_UK_DocK_ProtectionFromFalling'},"<e1>Windows, skylights and ventilators</e1> which can be opened by people in or about the building shall be so <e2>constructed or equipped that they may be opened, closed or adjusted safely</e2>.",necessity,annotated
+c72a5952-2e0b-4d4a-9185-09e4149b6239,The flooring functioning as waterproofing or waterproofing located underneath the flooring in wet rooms must have a watertight connection with the waterproofing of the wall.,{'ID': '114_Finnish_Health-Humidity'},The flooring functioning as waterproofing or <e1>waterproofing</e1> located underneath the flooring in wet rooms must have a <e2>watertight connection</e2> with the waterproofing of the wall.,necessity,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479_10,,,Individual flights are: for gradients up to 1:15 not more than 10m long; for <e1>ending</e1> up to <e2>0.07</e2> not more than 5m long.,less-equal,synthetic
+c47598f9-df79-4d77-aba9-8f380342372f,extract air of category 4 shall be conducted to the outdoors through individual extract air ducts.,{'ID': '88_Finnish_Health-IndoorClimateAndVentilation'},<e1>extract air</e1> of <e2>category</e2> 4 shall be conducted to the outdoors through individual extract air ducts.,part-of,annotated
+ef561e39-db90-462c-8dde-15fbeae954e5_1,,,A cube with <e1>rise</e1> of no more than <e2>two</e2> may pass between the upper edge of the barrier and the protective part.,less-equal,synthetic
+079db365-cfed-474e-9329-25349ac0db4a_11,,,"In connection with the door of an outside space of an individual dwelling the <e1>maximum number of occupants</e1> outside the door may be more than <e2>0.2</e2> if the level difference can, with reasonable effort, be eliminated with equipment in the outdoor space.",greater,synthetic
+bb9ec292-062b-43c3-8590-856dd5f6b890_11,,,"The <e1>size</e1> and building emission rate calculated using the measured air permeability must not be higher than the <e2>efficiency</e2> and target emission rate, respectively.",less-equal,synthetic
+76bf63bd-30f4-440d-81a0-61ca16170f70,Control should be maximised and heat gain to uninsulated pipes should only be permitted where the proportion of the cooling load relating to distribution pipework is less than 1 of the total load.,{'ID': '177_UK_DocM_V2_AccessAndUseOfBuildings'},Control should be maximised and <e1>heat gain</e1> to uninsulated <e2>pipes</e2> should only be permitted where the proportion of the cooling load relating to distribution pipework is less than 1 of the total load.,part-of,annotated
+5e7d4831-4ec8-48f9-9e60-0422fcc1eae4,"When replacing an existing system, the installed generation capacity of the new system should be no less than that of the existing system, except where a smaller system can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",{'ID': '344_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When replacing an existing system, the <e1>installed generation capacity</e1> of the new system should be no less than that of the existing system, except where a smaller <e2>system</e2> can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",none,annotated
+32dec356-9315-4ea6-9213-86ad0a72802b,Drawings should be reviewed by the designer and installer and should include specifications for key materials.,{'ID': '177_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Drawings</e1> should be <e2>reviewed by the designer and installer</e2> and should include specifications for key materials.,necessity,annotated
+8e9ef8dc-18bd-4877-98cd-556aa4adee8f,"Reasonable provision shall be made for the conservation of fuel and power in buildings by: (a) limiting heat gains and losses (i) through thermal elements and other parts of the building fabric; and (ii) from pipes, ducts and vessels used for space heating, space cooling and hot water services; (b) providing fixed building services which (i) are energy efficient to a reasonable standard; (ii) have effective controls; and (iii) are commissioned by testing and adjusting as necessary to ensure they use no more fuel and power than is reasonable in the circumstances.",{'ID': '431_UK_DocM_V2_AccessAndUseOfBuildings'},"Reasonable <e1>provision</e1> shall be made for the conservation of fuel and power in buildings by: (a) <e2>limiting heat gains and losses</e2> (i) through thermal elements and other parts of the building fabric; and (ii) from pipes, ducts and vessels used for space heating, space cooling and hot water services; (b) providing fixed building services which (i) are energy efficient to a reasonable standard; (ii) have effective controls; and (iii) are commissioned by testing and adjusting as necessary to ensure they use no more fuel and power than is reasonable in the circumstances.",selection,annotated
+5211dbd1-d12a-4371-ad62-1dc5616cd2f5,The heat pump along with its accompanying pipework should be flushed and purged as a separate system while isolated from the ground array system.,{'ID': '387_UK_DocL_V1_ConsrvationOfFuelAndPower'},The heat pump along with its accompanying <e1>pipework</e1> should be <e2>flushed and purged as a separate system</e2> while isolated from the ground array system.,necessity,annotated
+7d35f4c4-fa65-4d68-a974-f54386ca8aee_9,,,"However, a horizontal <e1>fasteners</e1> in a protective part must be no higher than <e2>300 millimetres</e2>.",less-equal,synthetic
+9415ae4b-7a74-4c70-a245-e4381c6d71bf,"At gables and party walls, insulation should extend to the wall; if the space between the wall and joist is less than 100mm, perimeter insulation may be required.",{'ID': '170_UK_DocL_V1_ConsrvationOfFuelAndPower'},"At gables and party walls, insulation should <e1>extend to the wall</e1>; if the space between the wall and joist is less than 100mm, perimeter insulation may be <e2>required</e2>.",none,annotated
+99a53f17-48cb-4012-a47b-700761e0983b_3,,,Where a new building which is not a residential building or a mixed-use building has more than 10 parking spaces (a) <e1>8.5m2</e1> of those <e2>precipices</e2> must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,equal,synthetic
+389c960b-525d-4f2e-9a2c-1805eb2dc20d_7,,,The full <e1>illuminance</e1> under a stair that forms part of the storage provision should be counted as <e2>10 litres per second per person</e2>.,equal,synthetic
+bde1697a-20c9-4f15-a63c-5be323a058c1_6,,,Any connection of <e1>20mm</e1> or more <e2>parking</e2> to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,greater-equal,synthetic
+a9944ed0-7168-4ec7-b761-0641e3e3228b,The sewerage system shall be equipped with cleanouts that are easy to handle and lockable in both horizontal and vertical sewers.,{'ID': '157_Finnish_Health-WaterAndSewerage'},The <e1>sewerage system</e1> shall be equipped with cleanouts that are <e2>easy to handle</e2> and lockable in both horizontal and vertical sewers.,none,annotated
+47e50ddf-6174-436d-851b-7ddf46c10ccf,A suitable chemical inhibitor should be added to the primary heating circuit to protect against scale and corrosion.,{'ID': '380_UK_DocL_V1_ConsrvationOfFuelAndPower'},A <e1>suitable</e1> chemical <e2>inhibitor</e2> should be added to the primary heating circuit to protect against scale and corrosion.,selection,annotated
+500fc416-e652-4a2c-8dd3-8d9754ea1829,There should be no visible mould on the inner surfaces of external walls of a properly heated building with typical moisture generation.,{'ID': '115_UK_DocF_V2_Ventilation'},There should be no visible mould on the inner surfaces of external walls of a properly heated <e1>building</e1> <e2>with typical moisture generation</e2>.,selection,annotated
+2a256a9c-0b8a-4acf-87e1-86a5857f36a3_6,,,"Where a driveway forms all, or part of, the approach route, an <e1>uppermost</e1> of at least <e2>5m</e2> wide should be provided so that a wheelchair user can pass a parked car.",greater-equal,synthetic
+4abb3268-3ba6-47e8-a8b7-4676dbaa9a16,"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide all means of escape routes with a minimum clear headroom of 2m, except in doorways.",{'ID': '28_UK_DocK_ProtectionFromFalling'},"For buildings other than dwellings and for common access areas in <e1>buildings</e1> that contain flats, Provide all <e2>means</e2> of escape routes with a minimum clear headroom of 2m, except in doorways.",none,annotated
+8151be81-09ad-4dac-b2d2-f0d757915b6c,"However, when the snow load can occur, the minimum value of the load s should be at least 0.5 kN/m2.",{'ID': '110_Finnish_StabilityOfStructures'},"However, when the snow load can occur, the minimum value of the <e1>load</e1> s should be at least <e2>0.5 kN/m2</e2>.",none,annotated
+40b40b1b-d1b1-49d8-b9b7-13c5845a169d_6,,,The structure of the control appliance of the plumbing fixture shall be such that its <e1>headroom</e1> does not arise above <e2>150mm</e2>.,less-equal,synthetic
+a86b58e8-046f-44b7-8e1b-00c876c8c647,"Parapets in categories A to E and panel parts of walls acting as parapets, as well as their fasteners, shall be designed to the concentrated load Qk = 0.3 kN acting on a random spot.",{'ID': '30_Finnish_StabilityOfStructures'},"Parapets in categories A to E and <e1>panel parts</e1> of walls acting as parapets, as well as their fasteners, shall be <e2>designed to the concentrated load Qk = 0.3 kN acting on a random spot</e2>.",necessity,annotated
+01d924bf-4a69-4eb8-b05e-ce993aee3d45_11,,,Perimeter insulation should be continuous and have a minimum <e1>parasitic energy use</e1> of <e2>half a metre</e2>.,greater-equal,synthetic
+e505b13c-7b62-4857-aa2d-544dc986e9c0,"For dwellings, for external tapered steps and stairs that are part of the building the going of each step should be a minimum of 280mm.",{'ID': '18_UK_DocK_ProtectionFromFalling'},"For dwellings, for external tapered steps and <e1>stairs</e1> <e2>that are part of the building</e2> the going of each step should be a minimum of 280mm.",selection,annotated
+76acc6bd-50c0-4f3f-b015-42e171ec6ce7,One electric vehicle charge point must be installed.,{'ID': '82_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},<e1>One</e1> <e2>electric vehicle charge point</e2> must be installed.,equal,annotated
+1d10aa43-7650-46b1-83c3-867f212ab9c3,Background ventilators should meet the performance standards for both of the following: a. air flow from outside to inside the dwelling; b. air flow from inside the dwelling to outside.,{'ID': '58_UK_DocF_V1_Ventilation'},Background ventilators should meet the performance standards for both of the following: a. <e1>air flow</e1> <e2>from outside to inside the dwelling</e2>; b. air flow from inside the dwelling to outside.,selection,annotated
+7f696221-52c9-4c52-8f90-74bd93c51299,This grippable handrail is 850-1000mm above the pitch line of the flight and extends at least 300mm beyond the top and bottom nosings.,{'ID': '73_UK_DocM_V1_AccessAndUseOfBuildings'},This grippable handrail is 850-1000mm <e1>above</e1> the <e2>pitch line of the flight</e2> and extends at least 300mm beyond the top and bottom nosings.,part-of,annotated
+13a437c0-918c-47f2-85bd-b80dd69eb027,"There are no limits on the design of display windows and similar glazing, but for new buildings their impact must be taken into account in the calculation of primary energy and CO2 emissions.",{'ID': '138_UK_DocM_V2_AccessAndUseOfBuildings'},"There are no limits on the design of display windows and similar glazing, but for new buildings their <e1>impact</e1> must be taken into account in the <e2>calculation of primary energy and CO2 emissions</e2>.",necessity,annotated
+6075de3c-d339-4ba4-9945-990480975615_0,,,"Where a kitchen and living room accommodation are not separate rooms (i.e. open plan), no fewer than <e1>70 kN</e1> <e2>design solar load</e2> of the same equivalent area as for other habitable rooms should be provided within the open-plan space.",greater-equal,synthetic
+7f696221-52c9-4c52-8f90-74bd93c51299_1,,,This grippable handrail is 850-1000mm above the pitch line of the flight and <e1>tie force</e1> at least <e2>270 millimetres</e2> beyond the top and bottom nosings.,greater-equal,synthetic
+bb9ec292-062b-43c3-8590-856dd5f6b890_3,,,"The <e1>use</e1> and building emission rate calculated using the measured air permeability must not be higher than the <e2>away</e2> and target emission rate, respectively.",less-equal,synthetic
+8cef7dc5-2d76-4dd8-80c5-6861b11a8f6f_11,,,"Where the work concerns a building containing more than <e1>400-600mm</e1> <e2>systems</e2>, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",greater-equal,synthetic
+aef92227-4c01-4c59-b96d-ce414540606b,"Appliances capable of burning both biomass fuel and fossil fuel the CO2 emission factor and primary energy factor for dua-lfuel appliances should be used, except where the building is in a smoke control area, when the anthracite figure should be used.",{'ID': '63_UK_DocM_V2_AccessAndUseOfBuildings'},"Appliances capable of burning both biomass fuel and fossil fuel the CO2 emission factor and <e1>primary energy factor</e1> for dua-lfuel appliances should be used, except where the building is in a smoke control area, when the <e2>anthracite figure</e2> should be used.",none,annotated
+8e9ef8dc-18bd-4877-98cd-556aa4adee8f,"Reasonable provision shall be made for the conservation of fuel and power in buildings by: (a) limiting heat gains and losses (i) through thermal elements and other parts of the building fabric; and (ii) from pipes, ducts and vessels used for space heating, space cooling and hot water services; (b) providing fixed building services which (i) are energy efficient to a reasonable standard; (ii) have effective controls; and (iii) are commissioned by testing and adjusting as necessary to ensure they use no more fuel and power than is reasonable in the circumstances.",{'ID': '431_UK_DocM_V2_AccessAndUseOfBuildings'},"Reasonable provision shall be made for the conservation of fuel and power in buildings by: (a) limiting heat gains and losses (i) through thermal elements and other parts of the building fabric; and (ii) from pipes, ducts and vessels used for space heating, space cooling and hot water services; (b) <e1>providing fixed building services</e1> which (i) are energy efficient to a reasonable standard; (ii) have <e2>effective controls</e2>; and (iii) are commissioned by testing and adjusting as necessary to ensure they use no more fuel and power than is reasonable in the circumstances.",selection,annotated
+d8066a73-49c2-4e99-825a-b49b9b2ba67d_8,,,A landing measuring at least <e1>0.15</e1> in <e2>full width</e2> must be reserved in front of and behind a door located in an exit route.,greater-equal,synthetic
+5869233a-4fc0-48bf-9007-2b0c9a169fef,"A building shall, if its size, number of storeys or an intended purpose of a premises within the building so requires, be divided into fire compartments in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",{'ID': '100_Finnish_FireSafety'},"A building shall, if its size, number of storeys or an <e1>intended purpose</e1> of a premises within the building so <e2>requires</e2>, be divided into fire compartments in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",selection,annotated
+c0a6d35c-cc20-428b-941d-c3e3e6365c74_8,,,"In a tier that is uninterrupted by cross-gangways, and where the pitch exceeds 25, use a <e1>average</e1> number of steps of <e2>75 light source lumens per circuit-watt</e2>.",equal,synthetic
+ff3e8f86-1542-4f54-a776-cfdc8482bad7_9,,,The <e1>horizontal spacing</e1> of an air conditioner working in cooling mode should be a minimum of <e2>390 millimetres</e2>.,greater-equal,synthetic
+4e8c5c50-44af-48f6-b959-e6f9b31afa1e_8,,,"If the planned time of use of a modular or portable building in a single location is less than two years, the only practical <e1>Standing areas</e1> may be <e2>thermal element</e2>.",equal,synthetic
+bc5a76fa-f0ec-47d5-b8e3-0e9458f3f140,"Foundations: wherever possible, blocks below the damp-proof course should be the same as those specified in the design for the above-ground main wall element (in masonry construction).",{'ID': '159_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Foundations: wherever possible, <e1>blocks</e1> below the damp-proof course should be the <e2>same as those specified in the design for the above-ground main wall element (in masonry construction)</e2>.",necessity,annotated
+2032e456-bf80-4342-90dc-0da164e00a9a,A unit that contains both living accommodation and space for commercial purposes (e.g. for a workshop or office) should be treated as a dwelling if the commercial part can be reverted to domestic use.,{'ID': '7_UK_DocF_V1_Ventilation'},A <e1>unit</e1> that contains both <e2>living accommodation</e2> and space for commercial purposes (e.g. for a workshop or office) should be treated as a dwelling if the commercial part can be reverted to domestic use.,part-of,annotated
+05864826-21ef-4ae7-9af8-2aaeffc7267a,Modular and portable buildings with a planned service life of more than two years but with an intended time of use in a single location of less than two years should be shown to comply with the energy efficiency requirements.,{'ID': '83_UK_DocM_V2_AccessAndUseOfBuildings'},Modular and portable buildings with a <e1>planned</e1> service life of more than two years but with an intended time of use <e2>in a single location</e2> of less than two years should be shown to comply with the energy efficiency requirements.,none,annotated
+b51c7a9f-2080-4e60-940f-e59af0cc97ce,"The buildings enclosure together with its construction layers and joints must form a whole, preventing the transfer of water across the surface of the enclosure into the construction by wind, slanting rain and wind pressure.",{'ID': '34_Finnish_Health-Humidity'},"The buildings enclosure together with its <e1>construction layers</e1> and joints must <e2>form a whole, preventing the transfer of water across the surface of the enclosure into the construction by wind, slanting rain and wind pressure</e2>.",necessity,annotated
+0096a3bf-ac16-4a75-adf9-8c3f4a9b8610,The smaller dimension of each panel which can be either the width or height of the panel should be 230mm or less.,{'ID': '33_UK_DocQ_Security_Dwellings'},The smaller dimension of each panel which can be either the <e1>width</e1> or height of the <e2>panel</e2> should be 230mm or less.,part-of,annotated
+38cd3221-7fc9-4462-be20-78b16a4309d3_5,,,The <e1>open outwards</e1> of openings in the newly created dwelling should not be more than <e2>2m</e2> of the total floor area.,less-equal,synthetic
+8f2f0722-46e5-4c3a-937d-51edde58141a,Routes intended for vehicle traffic must be located in a way that does not restrict pedestrian routes or the space required for opening doors and gates.,{'ID': '90_Finnish_SafetyOfUse'},<e1>Routes</e1> intended for vehicle traffic must be <e2>located in a way that does not restrict pedestrian routes or the space required for opening doors and gates</e2>.,necessity,annotated
+6c789809-b1b8-429a-8fe2-8ce16f8a4b54,Air flows in the continuous working area of a parking garage for motor vehicles shall be designed so that the instantaneous carbon monoxide concentration does not exceed 7 mg/m3 (6 ppm).,{'ID': '62_Finnish_Health-IndoorClimateAndVentilation'},Air flows in the <e1>continuous</e1> <e2>working area</e2> of a parking garage for motor vehicles shall be designed so that the instantaneous carbon monoxide concentration does not exceed 7 mg/m3 (6 ppm).,selection,annotated
+9b908e68-0f92-4883-9fd2-7fe013848b15,"Where a gas combination boiler is used, the boiler type should be selected to modulate down to the typical heating load of the dwelling.",{'ID': '237_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a <e1>gas combination boiler</e1> is <e2>used</e2>, the boiler type should be selected to modulate down to the typical heating load of the dwelling.",selection,annotated
+517253f8-98b1-4821-8901-75124d3237db,"Consideration should be given to the provision of a second handrail on stairs in a wide range of building types, and particularly in schools, for use by children and people of short stature.",{'ID': '59_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Consideration</e1> should be given to the provision of a second <e2>handrail</e2> on stairs in a wide range of building types, and particularly in schools, for use by children and people of short stature.",selection,annotated
+a1f91cfd-21f8-49a4-8468-746f49f4848e,"For a building that contains more than one dwelling for example a block of flats or a terrace of houses an average target primary energy rate, target emission rate and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",{'ID': '50_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For a <e1>building</e1> that contains more than one dwelling for example a block of flats or a terrace of houses an average target primary energy rate, <e2>target emission rate</e2> and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",part-of,annotated
+8beb3f9d-f806-4385-b876-2b3d29d7852a,Independent temperature control of the hot water circuit should be implemented with a cylinder thermostat and a timing device.,{'ID': '269_UK_DocL_V1_ConsrvationOfFuelAndPower'},Independent <e1>temperature control</e1> of the <e2>hot water circuit</e2> should be implemented with a cylinder thermostat and a timing device.,part-of,annotated
+d713514a-9398-45a2-9584-efecff6ebcc5,Reasonable provision must be made to resist unauthorised access to (a) any dwelling; and (b) any part of a building from which access can be gained to a flat within the building.,{'ID': '4_UK_DocQ_Security_Dwellings'},Reasonable provision must be made to <e1>resist unauthorised access</e1> to (a) any dwelling; and (b) any <e2>part</e2> of a building from which access can be gained to a flat within the building.,necessity,annotated
+8fec1c4a-527e-49b6-9267-89ff700a9291,"Where membranes are penetrated, careful detailing should be used to achieve a robust and durable seal at these penetrations.",{'ID': '182_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where <e1>membranes</e1> are <e2>penetrated</e2>, careful detailing should be used to achieve a robust and durable seal at these penetrations.",selection,annotated
+12e545d1-64f4-45c9-a520-5b8a003eba0a_3,,,"If the dwelling has more than <e1>220 millimetres</e1> exposed <e2>ramp</e2>, the area of background ventilators on each facade should be similar, to allow cross-ventilation.",greater,synthetic
+759d26ff-821f-4949-9096-a7e15c5580f6,Windows and doors: should be installed in such a way that the thermal integrity of the insulated plane is maintained.,{'ID': '137_UK_DocL_V1_ConsrvationOfFuelAndPower'},Windows and doors: should be installed in such a way that the <e1>thermal integrity</e1> of the insulated plane is <e2>maintained</e2>.,selection,annotated
+d941229d-4de4-4873-9704-c207a9b673c8,An exit enclosure has doors that open separately into each adjoining fire compartment without a need to open the doors at the same time.,{'ID': '26_Finnish_FireSafety'},An <e1>exit enclosure</e1> has <e2>doors</e2> that open separately into each adjoining fire compartment without a need to open the doors at the same time.,part-of,annotated
+6187cad8-0d6d-4154-b98b-7285b36fea8d,Continuously running fans should be set up to operate without occupant intervention but may have manual or automatic controls for selecting the high rate of operation.,{'ID': '65_UK_DocF_V1_Ventilation'},Continuously running fans should be set up to operate without occupant intervention but may have manual or automatic <e1>controls</e1> <e2>for selecting the high rate of operation</e2>.,selection,annotated
+c952db0f-b605-4335-8d56-97fc339ad5ba_9,,,All <e1>15mm</e1> <e2>bathrooms</e2> of the installation and commissioning checklist should be completed.,equal,synthetic
+3e9fc57e-bc69-4f17-a056-dd7767afa9bb_4,,,"If the <e1>energy  consumption</e1> of the building does not exceed <e2>two</e2>, access to the attic fire compartments from the outside shall be required.",less-equal,synthetic
+10e66a84-25db-40a0-87d5-6297d0732fe4,The shutoff valves shall be located: 1) at each house; 2) at each apartment; 3) in vertical service pipes; 4) on both sides of devices installed in the service pipes; 5) before a device or fixture that is connected to the connector pipe;  6) on both sides of the water meters.,{'ID': '93_Finnish_Health-WaterAndSewerage'},The <e1>shutoff valves</e1> shall be located: 1) at each <e2>house</e2>; 2) at each apartment; 3) in vertical service pipes; 4) on both sides of devices installed in the service pipes; 5) before a device or fixture that is connected to the connector pipe; 6) on both sides of the water meters.,necessity,annotated
+339fc78c-a2f2-481c-a410-3aeb41e24b8a_4,,,Solid walls constructed of coursed brickwork or blockwork should be at least as <e1>total load</e1> as <e2>6m</e2> of the storey height.,greater-equal,synthetic
+2afa8bba-b5ad-4e12-bc27-4beea3fd09b2_7,,,"The normal relationship between the dimensions of the rise and going is: <e1>1,200 MJ/m2</e1> equals <e2>40 degrees Celsius</e2>.",equal,synthetic
+78d904cd-b605-43a6-b3a4-34c22f557123,"Instead, the dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate should be calculated as if the area covered by the pool were replaced with the equivalent area of floor with the same U-value as the pool surround.",{'ID': '84_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Instead, the <e1>dwelling primary energy rate</e1>, dwelling emission rate and dwelling fabric energy efficiency rate should be calculated as if the area covered by the pool were <e2>replaced with the equivalent area of floor with the same U-value as the pool surround</e2>.",none,annotated
+3c0a8ccb-d813-40fb-b69b-88250d3bc4ec_3,,,These fittings should not exceed a <e1>from the top and bottom corners of the door</e1> of <e2>0.2</e2>.,less-equal,synthetic
+82330d3d-6139-4050-9ca0-946bc982fbb0,The sign should be suitably weatherproof for its location.,{'ID': '119_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},The sign should be <e1>suitably</e1> <e2>weatherproof for its location</e2>.,selection,annotated
+72e7ed0c-9e73-46b2-a919-20f3fea337fd_3,,,"An <e1>electric resistance heating</e1> with a potentially flammable or explosive atmosphere must not be located in a <e2>installation and commissioning checklist</e2> where there are dwellings, accommodation premises, institutions or assembly and business premises.",not-part-of,synthetic
+4c83069b-8c22-43ad-92a0-354ecd0e40a1,"Sufficient information should be provided to ensure that people can operate, maintain or alter an electrical installation with reasonable safety.",{'ID': '7_UK_DocP_ElectricalSafety'},"<e1>Sufficient</e1> <e2>information</e2> should be provided to ensure that people can operate, maintain or alter an electrical installation with reasonable safety.",selection,annotated
+1913381b-a2cc-496e-9168-82ccf2a01d50_11,,,"In connection with repair and alteration work, the heat emitters connected to the domestic hot water ring duct may be replaced so that the <e1>going</e1> of the heat emitters to be installed does not exceed <e2>24 degrees Celsius</e2>.",less-equal,synthetic
+f6add908-4d45-4b3e-83a6-369f6c36c037_6,,,"Door rails, stiles and muntins should be at least <e1>1800mm</e1> <e2>measures</e2>.",greater-equal,synthetic
+e505b13c-7b62-4857-aa2d-544dc986e9c0,"For dwellings, for external tapered steps and stairs that are part of the building the going of each step should be a minimum of 280mm.",{'ID': '18_UK_DocK_ProtectionFromFalling'},"For dwellings, for external tapered steps and stairs that are part of the building the <e1>going</e1> of each step should be a minimum of <e2>280mm</e2>.",greater-equal,annotated
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_0,,,"In buildings more than <e1>1</e1> and at most 28 metres in <e2>clear width</e2>, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",greater,synthetic
+a235c68f-ae44-4770-b005-4e9d7b659eb7,All cavity walls should have leaves at least 90mm thick and cavities at least 50mm wide.,{'ID': '35_UK_DocA_Structure'},All cavity walls should have leaves at least 90mm thick and cavities at least <e1>50mm</e1> <e2>wide</e2>.,greater-equal,annotated
+7f3f59a4-fc7e-4b14-8074-384f6cacf548,"The height of a barrier in a dwellings indoor areas may, however, be at least 0.9 metres if the drop is less than three metres.",{'ID': '45_Finnish_SafetyOfUse'},"The height of a <e1>barrier</e1> in a dwellings indoor areas may, however, be at least 0.9 metres if the drop is less than <e2>three metres</e2>.",none,annotated
+8207751f-13b8-4fe3-9bfe-4423093d4905_11,,,A building with dwellings or accommodation or patient rooms shall be designed and implemented so that the <e1>rated speed</e1> of the staircase and exit route is no more than <e2>900mm</e2>.,less-equal,synthetic
+aef92227-4c01-4c59-b96d-ce414540606b,"Appliances capable of burning both biomass fuel and fossil fuel the CO2 emission factor and primary energy factor for dua-lfuel appliances should be used, except where the building is in a smoke control area, when the anthracite figure should be used.",{'ID': '63_UK_DocM_V2_AccessAndUseOfBuildings'},"Appliances capable of burning both biomass fuel and fossil fuel the CO2 emission factor and primary energy factor <e1>for dua-lfuel appliances</e1> should be used, except where the building is in a smoke control area, when the <e2>anthracite figure</e2> should be used.",none,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_1,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the <e1>Activation</e1> from these spaces does not exceed <e2>adequate number</e2> of the total air flow in the vertical duct.",less-equal,synthetic
+302c413e-fefd-47f1-914f-0dc787e4a761_1,,,"Where <e1>cross-sectional area</e1> on surfaces is greater than <e2>01:08:00</e2>, a difference in light reflectance value should be a minimum of 20 points.",greater,synthetic
+4e4fdf56-c45b-4d89-b18f-7a2f24a41ba9_1,,,"In spaces intended for more than 60 persons, the <e1>power requirements</e1> of the access route must be at least <e2>Five ventilators</e2>.",greater-equal,synthetic
+05864826-21ef-4ae7-9af8-2aaeffc7267a_3,,,"Modular and portable buildings with a planned service life of more than two years but with an <e1>clear width</e1> in a single location of less than <e2>1,500 millimetres</e2> should be shown to comply with the energy efficiency requirements.",less,synthetic
+7c44934c-61e1-4904-a493-1aa360ccc7d1,"The building shall be constructed so that the combined dead,imposed and wind loads are sustained and transmitted by it to the ground: (a) safely; and (b) without causing such deflection or deformation of any part of the building, or such movement of the ground, as will impair the stability of any part of another building.",{'ID': '1_UK_DocA_Structure'},"The building shall be constructed so that the combined dead,imposed and wind loads are sustained and <e1>transmitted by it to the ground</e1>: (a) safely; and (b) <e2>without causing such deflection or deformation of any part of the building, or such movement of the ground, as will impair the stability of any part of another building</e2>.",selection,annotated
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab_0,,,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the <e1>topography</e1> of that installation exceeds <e2>35 mg/m3 (30 ppm)</e2> of the total cost of the major renovation.",greater,synthetic
+642e2c46-45a8-440f-af0b-1b53f41d8d8f,Taps and WC cubicle doors should be operable by people with limited strength or manual dexterity and doors to cubicles should be capable of being opened if a person has collapsed against them while inside the cubicle.,{'ID': '156_UK_DocM_V2_AccessAndUseOfBuildings'},Taps and WC cubicle <e1>doors</e1> should be <e2>operable by people with limited strength or manual dexterity</e2> and doors to cubicles should be capable of being opened if a person has collapsed against them while inside the cubicle.,necessity,annotated
+2cc3d5b0-d3b4-45f2-a00d-838fd3f9abbb,"There should be a supply rate, in the absence of tobacco smoke or other excessive pollutants, of 10 litres per second per person.",{'ID': '114_UK_DocF_V2_Ventilation'},"There should be a <e1>supply rate</e1>, <e2>in the absence of tobacco smoke or other excessive pollutants</e2>, of 10 litres per second per person.",necessity,annotated
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab_6,,,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the <e1>sum</e1> of that installation exceeds <e2>120</e2> of the total cost of the major renovation.",greater,synthetic
+77f993c6-dff1-4f9a-8f66-73221d3cbaff_10,,,"If the dwelling only has one habitable room, a minimum <e1>protective part</e1> of <e2>100</e2> should be used.",greater-equal,synthetic
+7d7d55f1-b28d-4ce8-aec6-dd4dc0786ce8_8,,,"For sizes of cylinder not listed, the <e1>Linear interpolation</e1> from the cylinder should not exceed <e2>2</e2>, where V is the volume in litres.",less-equal,synthetic
+dcc583b1-8c4c-42cf-a1ed-e8907de56254_3,,,"The rise of the indoor steps of other spaces intended for everyday use may be no more than 180 millimetres, and the <e1>number of occupants</e1> must be no less than <e2>5m</e2>.",greater-equal,synthetic
+35af73f1-53c7-4377-9da0-acf99eef4d8e,"WC compartment doors, and doors to wheelchair-accessible unisex toilets, changing rooms or shower rooms have an emergency release mechanism so that they are capable of being opened outwards, from the outside , in case of emergency.",{'ID': '159_UK_DocM_V2_AccessAndUseOfBuildings'},"WC compartment doors, and <e1>doors</e1> to wheelchair-accessible unisex toilets, changing rooms or <e2>shower rooms</e2> have an emergency release mechanism so that they are capable of being opened outwards, from the outside , in case of emergency.",part-of,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",{'ID': '85_Finnish_Health-IndoorClimateAndVentilation'},"<e1>Extract air</e1> from toilets, washrooms and cleaning spaces may be <e2>conducted to vertical ducts</e2> for extract air categories 1 and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",necessity,annotated
+793cb939-b3d9-46eb-ae65-71a4d5c8031b_11,,,Where the parking is within the private curtilage of the dwelling (but not within a carport or garage) at least one space is a standard parking bay that can be <e1>total number</e1> to <e2>0.7W/(m2K)</e2>.,less-equal,synthetic
+082c7ed9-3579-48c2-a0d2-076f1edd647c_9,,,"Each of the <e1>30</e1> <e2>air tightness</e2> of the centrally hinged window should be assessed as a single side, bottom or top hung window.",equal,synthetic
+e15250c0-1279-4d29-a1ec-31560b045007_4,,,<e1>cords</e1> of basement storeys must not be connected to fire and smoke-proof <e2>Door entry controls</e2>.,not-part-of,synthetic
+36650de0-ef3c-4fd1-8199-f47c0e576076_11,,,"the <e1>patterns</e1> of the platform does not exceed <e2>1,500 millimetres</e2>.",less-equal,synthetic
+bb9ec292-062b-43c3-8590-856dd5f6b890,"The building primary energy rate and building emission rate calculated using the measured air permeability must not be higher than the target primary energy rate and target emission rate, respectively.",{'ID': '357_UK_DocM_V2_AccessAndUseOfBuildings'},"The building primary energy rate and <e1>building emission rate</e1> calculated using the measured air permeability must not be higher than the target primary energy rate and <e2>target emission rate</e2>, respectively.",less-equal,annotated
+7d877df3-9aa7-4dff-a64d-5356a66c944d,"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a width exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",{'ID': '59_Finnish_SafetyOfUse'},"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of <e1>stairs</e1> or ramps that have a <e2>width</e2> exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",part-of,annotated
+a7d2ac72-8a5b-4432-8449-001439d3ab93,Guarding should be sized to prevent the passage of a 100mm sphere.,{'ID': '85_UK_DocO_Overheating'},<e1>Guarding</e1> should be <e2>sized to prevent the passage of a 100mm sphere</e2>.,necessity,annotated
+0f67dad7-6df9-444b-8e72-f447668e3fde_11,,,"Where sanitary facilities are wheelchair accessible, WC pans should be a minimum of <e1>0.9 metres</e1> <e2>instantaneous carbon monoxide concentration</e2>.",greater-equal,synthetic
+d5a90fc3-6477-476f-91f0-083444f3b68b,Ventilation should be controllable.,{'ID': '63_UK_DocF_V1_Ventilation'},<e1>Ventilation</e1> should be <e2>controllable</e2>.,necessity,annotated
+c0a6d35c-cc20-428b-941d-c3e3e6365c74_10,,,"In a tier that is uninterrupted by cross-gangways, and where the pitch exceeds 25, use a <e1>replaced</e1> number of steps of <e2>1.501kWhPE/kWh</e2>.",equal,synthetic
+78a7dc3d-5e1e-4858-8913-b319e30f2ff1,The air extract rate should be 20 litres per second per machine during use.,{'ID': '46_UK_DocF_V2_Ventilation'},The <e1>air extract rate</e1> should be 20 litres per second per <e2>machine</e2> during use.,part-of,annotated
+81314489-dcd9-410f-9b15-595b87e7c8f9,"The resilient layer should be timber sheathing at least 9mm thick, expanded metal or a similar resilient material.",{'ID': '14_UK_DocQ_Security_Dwellings'},"The resilient layer should be <e1>timber sheathing</e1> at least 9mm <e2>thick</e2>, expanded metal or a similar resilient material.",part-of,annotated
+cea6e7bd-c494-4146-9f81-3fd2ed64a2a6_11,,,The <e1>location</e1> of the floor surface in the seating area and access route may not exceed <e2>(16.66 8.33 V0.4)/(1000 24)</e2>.,less-equal,synthetic
+73b4b305-8971-489a-a290-f996e1f63e19,"The clear width of the door and opening leading to room spaces of a non-residential building as well as to residential rooms of a residential building, necessary spaces serving residence and spaces serving the use of the building shall be at least 800 millimetres.",{'ID': '19_Finnish_Accessibility'},"The clear width of the door and <e1>opening</e1> leading to room spaces of a non-residential building as well as to residential rooms of a residential building, necessary spaces serving residence and spaces serving the use of the building shall be at least <e2>800 millimetres</e2>.",none,annotated
+2afa8bba-b5ad-4e12-bc27-4beea3fd09b2_1,,,The normal relationship between the <e1>load capacity</e1> of the rise and going is: <e2>21 C</e2> equals between 550mm and 700mm.,equal,synthetic
+dd056285-1aa4-4c6d-94ac-b911458cb7ea,"Where any of the parking spaces for new buildings other than residential or mixed-use buildings are in a covered car park, the requirement to install an electric vehicle charge point should be met by installing a charge point in a parking space that is not within a covered car park.",{'ID': '70_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where any of the parking spaces for new buildings other than residential or mixed-use buildings are in a covered car park, the <e1>requirement</e1> <e2>to install an electric vehicle charge point</e2> should be met by installing a charge point in a parking space that is not within a covered car park.",selection,annotated
+54907849-c48f-4267-b5f0-fc7e9279da7c,"For existing dwellings, when carrying out work on an existing system, such as installing or replacing components (e.g. replacing a boiler but retaining the pipework and heat emitters), the energy performance of the new components should be assessed.",{'ID': '409_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For existing dwellings, when <e1>carrying out work on an existing system, such as installing or replacing components</e1> (e.g. replacing a boiler but retaining the pipework and heat emitters), the energy performance of the new <e2>components</e2> should be assessed.",none,annotated
+f7cfdf57-28f3-4d23-90bf-ec2268e14bac,"Ramps, steps, thresholds and differences in levels in passageways must be clearly indicated using lighting and surface brightness contrasts or warning signs.",{'ID': '65_Finnish_SafetyOfUse'},"Ramps, steps, thresholds and <e1>differences</e1> in <e2>levels</e2> in passageways must be clearly indicated using lighting and surface brightness contrasts or warning signs.",part-of,annotated
+dcc583b1-8c4c-42cf-a1ed-e8907de56254_6,,,"The rise of the indoor steps of other spaces intended for everyday use may be no more than 180 millimetres, and the <e1>atmosphere</e1> must be no less than <e2>180kW</e2>.",greater-equal,synthetic
+6075de3c-d339-4ba4-9945-990480975615_3,,,"Where a kitchen and living room accommodation are not separate rooms (i.e. open plan), no fewer than <e1>2m</e1> <e2>speed glandless circulators</e2> of the same equivalent area as for other habitable rooms should be provided within the open-plan space.",greater-equal,synthetic
+7a1bc727-1daa-4668-83f6-b44327b96898,"In glazed balconies, the spread of fire from one balcony to another and to an adjacent fire compartment must be restricted.",{'ID': '133_Finnish_FireSafety'},"In glazed <e1>balconies</e1>, the spread of fire <e2>from one balcony to another and to an adjacent fire compartment</e2> must be restricted.",none,annotated
+3e9fc57e-bc69-4f17-a056-dd7767afa9bb,"If the height of the building does not exceed 28 metres, access to the attic fire compartments from the outside shall be required.",{'ID': '241_Finnish_FireSafety'},"If the <e1>height</e1> of the <e2>building</e2> does not exceed 28 metres, access to the attic fire compartments from the outside shall be required.",part-of,annotated
+01bd7c41-594c-4440-8058-c34f1c4bad09,"When determining the free area available for ventilation during sleeping hours, only the proportion of openings that can be opened securely should be considered to provide useful ventilation.",{'ID': '82_UK_DocO_Overheating'},"When determining the free area available for ventilation during sleeping hours, only the proportion of <e1>openings</e1> that can be <e2>opened securely</e2> should be considered to provide useful ventilation.",selection,annotated
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c_2,,,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be <e1>maximum number of occupants</e1> <e2>0.15</e2>.",equal,synthetic
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_9,,,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under <e1>visual contrast</e1> <e2>25W/m2</e2>.",equal,synthetic
+05864826-21ef-4ae7-9af8-2aaeffc7267a_9,,,Modular and portable buildings with a planned service life of more than two years but with an <e1>product certificate</e1> in a single location of less than <e2>6mm</e2> should be shown to comply with the energy efficiency requirements.,less,synthetic
+2cc3d5b0-d3b4-45f2-a00d-838fd3f9abbb_2,,,"There should be a <e1>Test data</e1>, in the absence of tobacco smoke or other excessive pollutants, of <e2>30m2</e2>.",equal,synthetic
+103f99ad-884b-4bae-9f22-ccb1c5bc3d26_7,,,"In an open garage of no more than <e1>600 x 600 millimetres</e1> <e2>free area</e2>, the maximum area may be used as the surface area of the storeys, even though the driveways between the various storeys are combined.",less-equal,synthetic
+a235c68f-ae44-4770-b005-4e9d7b659eb7_8,,,All cavity walls should have leaves at least 90mm thick and cavities at least <e1>7 mg/m3 (6 ppm)</e1> <e2>both sides</e2>.,greater-equal,synthetic
+29232335-402c-4ed9-af74-fd093ac22e28_10,,,The natural or mechanical ventilation system of a building shall be strong and its air-tightness shall be at least <e1>target fabric energy efficiency rate</e1> <e2>30% load</e2>.,greater-equal,synthetic
+bf798097-bb99-42d0-a73f-8cebab8fbeb8_9,,,"In the entrance halls and other indoor areas of administrative, service and business premises and in assembly areas, the <e1>service</e1> of the steps must be no more than <e2>500 millimetres</e2> and the tread must be no less than 300 millimetres.",less-equal,synthetic
+389c960b-525d-4f2e-9a2c-1805eb2dc20d_4,,,The full <e1>continuity</e1> under a stair that forms part of the storage provision should be counted as <e2>600kg/m3</e2>.,equal,synthetic
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_3,,,"In buildings more than 9 metres and at most 28 metres in height, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than <e1>30m2</e1> in <e2>design temperature difference</e2>, these must be accessible via the interior.",greater,synthetic
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77,Skirtings totalling up to 50mm total thickness and shallow projecting ducts or casings above 1800mm may be discounted when measuring clear width.,{'ID': '131_UK_DocM_V1_AccessAndUseOfBuildings'},Skirtings totalling up to 50mm total thickness and shallow projecting ducts or <e1>casings</e1> above <e2>1800mm</e2> may be discounted when measuring clear width.,greater,annotated
+6e5e61dd-039d-4079-9c3f-f52fc12efefb,For continuing horizontal structures the loaded area shall be calculated span by span.,{'ID': '12_Finnish_StabilityOfStructures'},For continuing horizontal <e1>structures</e1> the <e2>loaded area</e2> shall be calculated span by span.,part-of,annotated
+7f72632a-dc0a-4318-afd7-7090b42350fc,Mechanical supply terminals should be located and directed to avoid draughts.,{'ID': '106_UK_DocF_V1_Ventilation'},Mechanical supply terminals should be located and <e1>directed</e1> to <e2>avoid draughts</e2>.,selection,annotated
+835d8fad-7a27-4299-aa38-a5b1771a6779_4,,,"In large building complexes, such as retail parks and large sports centres, there should be <e1>28 metres</e1> wheelchair-accessible unisex <e2>accommodation</e2> capable of including an adult changing table.",equal,synthetic
+6ec243f2-9294-4b7c-89a4-1c46e4a69cc9_7,,,"If site constraints necessitate an <e1>non-domestic building</e1> of <e2>one</e2> or steeper, an approach incorporating ramped access should be provided.",greater-equal,synthetic
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_2,,,Skirtings totalling up to <e1>180kW</e1> <e2>target primary energy rate</e2> and shallow projecting ducts or casings above 1800mm may be discounted when measuring clear width.,less-equal,synthetic
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab_6,,,"If the <e1>Control</e1> of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds <e2>5m</e2> of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",greater,synthetic
+d3e7a947-536e-4a49-9823-e27fc0f68b27_11,,,<e1>air flow rate</e1> of landings to be at least equal to the <e2>rise</e2> of the ramp.,greater-equal,synthetic
+4a0355cd-8b2f-4be1-b0d1-3fc90981b3d3,"In addition, the entrance must be protected against snow loads with a covering.",{'ID': '97_Finnish_SafetyOfUse'},"In addition, the <e1>entrance</e1> must be <e2>protected against snow loads with a covering</e2>.",necessity,annotated
+15f74476-8f8e-48a3-8906-752c29fdebac,The results should be recorded and given to the building owner.,{'ID': '399_UK_DocM_V2_AccessAndUseOfBuildings'},The <e1>results</e1> should be recorded and given to the <e2>building owner</e2>.,necessity,annotated
+4fc3b5b1-a838-4429-b385-d8e80e6633eb_2,,,"In the absence of relevant harmonised European Standards, products with a <e1>dimensions</e1> exceeding <e2>2.2 metres</e2> must have a product certificate issued by a Notified Body.",greater,synthetic
+aa7c5790-2189-451d-bd0e-956a257a7b6d,"In an existing system, when a boiler or hot water storage vessel is replaced, any accessible pipes in the dwelling should be insulated.",{'ID': '201_UK_DocL_V1_ConsrvationOfFuelAndPower'},"In an <e1>existing system</e1>, when a boiler or hot water storage vessel is replaced, any accessible <e2>pipes</e2> in the dwelling should be insulated.",none,annotated
+8fcdc238-3c30-4659-9303-1b126a39b2cd_3,,,The design solar load should be <e1>long-term</e1> by at least <e2>100 litres</e2>.,greater-equal,synthetic
+bde1697a-20c9-4f15-a63c-5be323a058c1_3,,,Any connection of <e1>8.5m2</e1> or more <e2>copy</e2> to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,greater-equal,synthetic
+e68377dd-acec-4915-a0b4-a5eb8c840bf1,"Where vehicle barriers are necessary, sufficient space (for example 500mm) should be allowed around the future connection location.",{'ID': '121_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where <e1>vehicle barriers</e1> are <e2>necessary</e2>, sufficient space (for example 500mm) should be allowed around the future connection location.",selection,annotated
+d54852df-8e3c-4e99-8484-31c403b78558,"If work is carried out on a system that includes a boiler, a boiler interlock should be installed.",{'ID': '256_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If work is carried out on a system that includes a <e1>boiler</e1>, a <e2>boiler interlock</e2> should be installed.",part-of,annotated
+3c28dbd6-8a3d-4ede-ae08-89e4b5d69d60_11,,,The approach route is a minimum of 900mm wide with a maximum <e1>thick</e1> of <e2>proportion</e2>.,less-equal,synthetic
+9fee4426-8d7f-40f9-bc6f-562a5d3fd9b4,"For roofs insulated at ceiling level, the long-term protection of the insulation layer should be considered: boarded areas should be provided above the insulation to give access for maintenance.",{'ID': '144_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For roofs insulated at ceiling level, the long-term protection of the insulation layer should be considered: boarded areas should be <e1>provided above the insulation</e1> to <e2>give access for maintenance</e2>.",selection,annotated
+3cbfb816-4071-496e-aec2-87d424df047f,Wheelchair users and ambulant disabled people should be able to wash or bathe either independently or with assistance from others.,{'ID': '181_UK_DocM_V2_AccessAndUseOfBuildings'},Wheelchair users and ambulant <e1>disabled</e1> <e2>people</e2> should be able to wash or bathe either independently or with assistance from others.,selection,annotated
+8e7e4d9a-05b8-4512-91c5-e8dbb9488685,"At night, windows, patio doors and balcony doors should be modelled as closed.",{'ID': '55_UK_DocO_Overheating'},"<e1>At night</e1>, windows, <e2>patio doors</e2> and balcony doors should be modelled as closed.",selection,annotated
+5afbc8c9-4c2e-4cb8-8945-24e184d161e1,The fan should be set at a speed that will approximately achieve the desired continuous flow rate.,{'ID': '201_UK_DocF_V1_Ventilation'},The fan should be set at a <e1>speed</e1> that will <e2>approximately achieve the desired continuous flow rate</e2>.,selection,annotated
+f009a781-0ced-408d-b3d1-6ae7a848012e,"The landings in the indoor and outdoor areas of a building must be safe, sufficiently spacious and suitable for their purpose.",{'ID': '31_Finnish_SafetyOfUse'},"The <e1>landings</e1> in the indoor and outdoor areas of a building must be safe, <e2>sufficiently spacious</e2> and suitable for their purpose.",necessity,annotated
+8aa4b706-1659-4e30-a4fe-e7f33efe3241_7,,,All <e1>2m</e1> <e2>lighting</e2> of the compliance checklist should be completed.,equal,synthetic
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab_3,,,"If the <e1>Air permeability</e1> of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds <e2>2 metres</e2> of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",greater,synthetic
+d7b27bbb-ac51-4036-8073-d094cbe994db,"In cases where the Energy Related Products Regulations and the Building Regulations both apply, both standards should be met.",{'ID': '232_UK_DocM_V2_AccessAndUseOfBuildings'},"In <e1>cases</e1> where the <e2>Energy Related Products Regulations and the Building Regulations both apply</e2>, both standards should be met.",selection,annotated
+45338082-ca66-418b-8fe1-8f2be926f330_11,,,A <e1>plaster-board</e1> of no more than <e2>800 millimetres</e2> may pass between the stair steps.,less-equal,synthetic
+e4fb8d18-8dbc-4351-a2df-d87f880f476a_4,,,The <e1>distance of the basement storey floor from the entry level</e1> for balconies is <e2>7 mg/m3 (6 ppm)</e2> that of the load-bearing structures of the storey.,equal,synthetic
+e1f1aeb9-7453-4b6b-b3f1-6049d711868a,The fire performance of the external wall structure of a building no more than 56 metres in height may also be demonstrated by a fullscale test.,{'ID': '156_Finnish_FireSafety'},The fire performance of the <e1>external</e1> wall structure of a building no more than <e2>56 metres</e2> in height may also be demonstrated by a fullscale test.,none,annotated
+c7035b48-7244-40a9-a70e-1d244caf72ac,"The same approved calculation tool must be used to calculate the target primary energy rate, target emission rate and target fabric energy efficiency rate and the dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate.",{'ID': '56_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The same approved calculation tool must be <e1>used to calculate</e1> the <e2>target primary energy rate</e2>, target emission rate and target fabric energy efficiency rate and the dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate.",selection,annotated
+7d877df3-9aa7-4dff-a64d-5356a66c944d_4,,,"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a <e1>total capital cost</e1> exceeding <e2>6mm</e2> and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",greater,synthetic
+082a011b-2d6a-4569-b58d-f8cab00f5d81,The quality of the installation of the ventilator product should be checked to ensure it is correctly mounted within the wall or window aperture.,{'ID': '191_UK_DocF_V1_Ventilation'},The <e1>quality of the installation</e1> of the <e2>ventilator product</e2> should be checked to ensure it is correctly mounted within the wall or window aperture.,part-of,annotated
+203faa23-7b71-47c9-a6e5-2333ac45389e_2,,,"The riser of the indoor steps of dwelling units and living quarters may be no more than 190 millimetres, and the <e1>heat</e1> must be no less than <e2>400kg</e2>.",greater-equal,synthetic
+3e9fc57e-bc69-4f17-a056-dd7767afa9bb_9,,,"If the <e1>layers</e1> of the building does not exceed <e2>(16.66 8.33 V0.4)/(1000 24)</e2>, access to the attic fire compartments from the outside shall be required.",less-equal,synthetic
+7f49ccb1-ce2c-47eb-8b22-2c8e806e5d88_5,,,The resilient layer should be to the full height of the door and <e1>15 degrees</e1> <e2>elevation difference</e2> of the doorset.,equal,synthetic
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c_2,,,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding <e1>1.501kWhPE/kWh</e1> <e2>extract air</e2> is EI 30; however, minor sealing parts and penetrations may be class E 15.",greater,synthetic
+9eb5bf01-3810-44e3-802b-7c7eadad1831,"Mechanical ventilation systems, including both continuous and intermittent mechanical ventilation, should be designed and installed to minimise noise.",{'ID': '21_UK_DocF_V1_Ventilation'},"Mechanical ventilation systems, including both <e1>continuous</e1> and intermittent <e2>mechanical ventilation</e2>, should be designed and installed to minimise noise.",selection,annotated
+55d84237-8fad-4bd7-b67d-0745b9cc1e31,"The doors of exits, and of areas leading to them, must be easy to open in an emergency.",{'ID': '222_Finnish_FireSafety'},"The <e1>doors</e1> of exits, and of <e2>areas</e2> leading to them, must be easy to open in an emergency.",part-of,annotated
+c5c5365f-273f-4c29-8491-4f50aabc3b78,"Manual controls for powered entrance doors should be clearly distinguishable against the background and not located so that a person, having used the control, needs to move to avoid contact with the door as it opens.",{'ID': '74_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Manual controls</e1> for powered entrance doors should be <e2>clearly distinguishable against the background</e2> and not located so that a person, having used the control, needs to move to avoid contact with the door as it opens.",necessity,annotated
+7dbe5dbf-39fb-4ba4-bc75-d6ac7898e615,"U-values for rooflights or rooflight-and-kerb assemblies should be based on the developed surface area of the rooflight (U-values), which is often greater than the area of the roof opening.",{'ID': '114_UK_DocL_V1_ConsrvationOfFuelAndPower'},"<e1>U-values</e1> for rooflights or rooflight-and-kerb assemblies should be <e2>based on the developed surface area of the rooflight (U-values), which is often greater than the area of the roof opening</e2>.",necessity,annotated
+4e4fdf56-c45b-4d89-b18f-7a2f24a41ba9_10,,,"In spaces intended for more than 60 persons, the <e1>rise</e1> of the access route must be at least <e2>280mm</e2>.",greater-equal,synthetic
+efe70fd9-5cdd-4586-9ebc-73c2960b1e00,"If a fire door is kept open in normal use, it shall be equipped with devices that will close the door in the event of fire.",{'ID': '120_Finnish_FireSafety'},"If a <e1>fire door</e1> is <e2>kept open in normal use</e2>, it shall be equipped with devices that will close the door in the event of fire.",selection,annotated
+50e89a86-e2be-439d-b230-79274cd7199b,Modular and portable buildings with a planned service life of more than two years at a single location should be shown to comply with the energy efficiency requirements.,{'ID': '81_UK_DocM_V2_AccessAndUseOfBuildings'},Modular and portable <e1>buildings</e1> with a planned service life of more than two years at a single location should be <e2>shown to comply with the energy efficiency requirements</e2>.,necessity,annotated
+113b8bf8-1856-45f5-a54b-d65ef100b437,"If a gas-fired combination boiler is installed in an existing dwelling, at least one of the following energy efficiency measures, appropriate to the system, should be installed.",{'ID': '262_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If a <e1>gas-fired</e1> combination boiler is installed in an existing dwelling, at least <e2>one</e2> of the following energy efficiency measures, appropriate to the system, should be installed.",none,annotated
+ebc429f0-cb90-41ab-9a11-401a2ddc7bad,"For continuous mechanical ventilation systems, such as continuous mechanical extract ventilation or mechanical ventilation with heat recovery, the system should be balanced to achieve design air flow rates at each room terminal.",{'ID': '268_UK_DocF_V1_Ventilation'},"For continuous mechanical ventilation systems, such as continuous <e1>mechanical</e1> extract ventilation or <e2>mechanical</e2> ventilation with heat recovery, the system should be balanced to achieve design air flow rates at each room terminal.",none,annotated
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",{'ID': '75_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If the <e1>cost</e1> of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds <e2>7%</e2> of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",greater,annotated
+35af73f1-53c7-4377-9da0-acf99eef4d8e,"WC compartment doors, and doors to wheelchair-accessible unisex toilets, changing rooms or shower rooms have an emergency release mechanism so that they are capable of being opened outwards, from the outside , in case of emergency.",{'ID': '159_UK_DocM_V2_AccessAndUseOfBuildings'},"WC compartment doors, and doors to <e1>wheelchair-accessible</e1> unisex <e2>toilets</e2>, changing rooms or shower rooms have an emergency release mechanism so that they are capable of being opened outwards, from the outside , in case of emergency.",selection,annotated
+f162906e-1097-420e-b2a0-dd746d5794c7,"Where controls are external to the heater, the system should be provided with a time switch/programmer and room thermostat, or programmable room thermostat.",{'ID': '265_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where controls are external to the heater, the <e1>system</e1> should be provided with a time switch/programmer and <e2>room thermostat</e2>, or programmable room thermostat.",necessity,annotated
+38322c6e-7509-4638-9a8d-74d5cfb777b2,A new district heat network should be taken as meaning any other district heat network.,{'ID': '83_UK_DocL_V1_ConsrvationOfFuelAndPower'},A <e1>new</e1> <e2>district heat network</e2> should be taken as meaning any other district heat network.,selection,annotated
+29c431ee-ea93-491d-ab13-06418d93c488,"If luminous efficacy is greater than 75 light source lumens per circuit-watt, manual control is acceptable.",{'ID': '338_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If <e1>luminous efficacy</e1> is greater than <e2>75 light source lumens per circuit-watt</e2>, manual control is acceptable.",greater,annotated
+835d8fad-7a27-4299-aa38-a5b1771a6779_3,,,"In large building complexes, such as retail parks and large sports centres, there should be <e1>0.7</e1> wheelchair-accessible unisex <e2>substantial proportion</e2> capable of including an adult changing table.",equal,synthetic
+37f01a2c-b944-45a2-a7f4-140d8c03d7ac_5,,,"After rebating, frame components should retain at least <e1>half a metre</e1> of <e2>Waterproofing</e2>.",greater-equal,synthetic
+2f8d4247-e53b-49ae-bd26-c4f1765eaee8_7,,,"Extract air of <e1>size</e1> <e2>30m2</e2>, 3 and 4 shall not be used as recirculation air.",equal,synthetic
+5163f2fb-022f-4589-889f-2ade7a9d49c6,The relevant parts of Part 2 and 3 should be signed by a person who is competent to design the residential building.,{'ID': '109_UK_DocO_Overheating'},The relevant <e1>parts</e1> of Part 2 and 3 should be <e2>signed by a person who is competent to design the residential building</e2>.,necessity,annotated
+f9de28ac-45bb-4400-9d9f-8afee73bd2e3_10,,,The <e1>step</e1> should not exceed <e2>half</e2> of dwelling floor area.,less-equal,synthetic
+50e89a86-e2be-439d-b230-79274cd7199b_11,,,Modular and portable buildings with a planned <e1>domestic  hot  water cylinder heat loss</e1> of more than <e2>8 per cent (1:12.5)</e2> at a single location should be shown to comply with the energy efficiency requirements.,greater,synthetic
+0da52584-1b37-48b5-840f-3795ae695275_3,,,the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where <e1>70 kN</e1> <e2>ventilation fans</e2> are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+f6add908-4d45-4b3e-83a6-369f6c36c037,"Door rails, stiles and muntins should be at least 44mm thick.",{'ID': '28_UK_DocQ_Security_Dwellings'},"<e1>Door</e1> rails, <e2>stiles</e2> and muntins should be at least 44mm thick.",part-of,annotated
+df122091-ca53-4134-98a3-47779c06f9df,The index terminal flow rate should be set with the terminal fully open and all other terminals should be adjusted to achieve the required flows at each terminal.,{'ID': '198_UK_DocF_V1_Ventilation'},The <e1>index terminal</e1> flow rate should be <e2>set with the terminal fully open</e2> and all other terminals should be adjusted to achieve the required flows at each terminal.,none,annotated
+825053cb-af5d-43a9-b59b-e2a5ae78ea73_2,,,The <e1>Capacities</e1> of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the <e2>energy  consumption</e2> of dwellings in the residential building; b. the number of associated parking spaces.,greater,synthetic
+783c19fa-0ef2-466f-b3e9-d4690e34ac5f,Where a system for onsite electricity generation is installed (a) reasonable provision must be made to ensure that (i) the system and its electrical output are appropriately sized for the site and available infrastructure; (ii) the system has effective controls; and (b) it must be commissioned by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.,{'ID': '214_UK_DocL_V1_ConsrvationOfFuelAndPower'},Where a system for onsite electricity generation is installed (a) reasonable provision must be made to ensure that (i) the <e1>system</e1> and its <e2>electrical output</e2> are appropriately sized for the site and available infrastructure; (ii) the system has effective controls; and (b) it must be commissioned by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.,part-of,annotated
+40b40b1b-d1b1-49d8-b9b7-13c5845a169d_3,,,"The structure of the control appliance of the plumbing fixture shall be such that its <e1>target emission rate</e1> does not arise above <e2>1,200 millimetres</e2>.",less-equal,synthetic
+dcc583b1-8c4c-42cf-a1ed-e8907de56254,"The rise of the indoor steps of other spaces intended for everyday use may be no more than 180 millimetres, and the tread must be no less than 270 millimetres.",{'ID': '23_Finnish_SafetyOfUse'},"The <e1>rise</e1> of the <e2>indoor</e2> steps of other spaces intended for everyday use may be no more than 180 millimetres, and the tread must be no less than 270 millimetres.",none,annotated
+3ca5cb38-b90b-4449-ba14-4268866df8e1,The water heater is close to the draw-off points and has a storage capacity no greater than 100 litres.,{'ID': '463_UK_DocM_V2_AccessAndUseOfBuildings'},The <e1>water heater</e1> is close to the draw-off points and has a <e2>storage capacity</e2> no greater than 100 litres.,part-of,annotated
+8364a5f1-f80e-484c-9f38-bffc6f4c1876,"Where communal parking is provided to blocks of flats, at least one standard parking bay is provided close to the communal entrance of each core of the block (or to the lift core where the parking bay is internal).",{'ID': '44_UK_DocM_V1_AccessAndUseOfBuildings'},"Where communal parking is provided to blocks of flats, at least one <e1>standard</e1> <e2>parking bay</e2> is provided close to the communal entrance of each core of the block (or to the lift core where the parking bay is internal).",selection,annotated
+986f7853-4975-4ecd-8f10-a75d818eb44a,"Fully insulated and continuous cavity closers should be used, installed tight to the insulation and cavity apertures.",{'ID': '140_UK_DocL_V1_ConsrvationOfFuelAndPower'},"<e1>Fully insulated</e1> and continuous cavity closers should be used, <e2>installed tight to the insulation and cavity apertures</e2>.",none,annotated
+451e7c91-d39f-4401-a0e3-5ab455ab0442,"The approach route should be level, gently sloping, or, where necessary, ramped.",{'ID': '15_UK_DocM_V1_AccessAndUseOfBuildings'},"The <e1>approach route</e1> should be level, <e2>gently sloping</e2>, or, where necessary, ramped.",necessity,annotated
+f7cfdf57-28f3-4d23-90bf-ec2268e14bac,"Ramps, steps, thresholds and differences in levels in passageways must be clearly indicated using lighting and surface brightness contrasts or warning signs.",{'ID': '65_Finnish_SafetyOfUse'},"<e1>Ramps</e1>, steps, thresholds and <e2>differences</e2> in levels in passageways must be clearly indicated using lighting and surface brightness contrasts or warning signs.",none,annotated
+20518e80-6f7e-457f-8c5a-59fa4c0eb324_8,,,"When calculating the heat loss for a buildings design solution, the <e1>results</e1> shall be used as the value of the <e2>location</e2> for the building envelope.",equal,synthetic
+009e12eb-db83-485c-9ffc-e1f462251109_11,,,Each air terminal should have a <e1>filling alarm</e1> of at least <e2>850-1000mm</e2> of the free area of its associated duct.,greater-equal,synthetic
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be class E 15.",{'ID': '134_Finnish_FireSafety'},"The <e1>fire compartmenting requirement</e1> for the balcony slab of a glazed balcony of a building exceeding two storeys is EI 30; however, minor <e2>sealing parts</e2> and penetrations may be class E 15.",none,annotated
+2633c957-07b4-4caa-a9d6-5acbac16b0b0_10,,,NOTE: Linear interpolation should be used to determine efficiencies between manufacturers declared efficiencies at 30 and <e1>500 millimetres</e1> <e2>diameter</e2>.,equal,synthetic
+569c7958-b7d6-4b9c-9dd9-13307e95e59b_8,,,"For ducted systems that are served by fans with a <e1>heating plant emission rate</e1> greater than <e2>850 millimetres</e2>, ductwork leakage tests should be carried out.",greater,synthetic
+76bf63bd-30f4-440d-81a0-61ca16170f70,Control should be maximised and heat gain to uninsulated pipes should only be permitted where the proportion of the cooling load relating to distribution pipework is less than 1 of the total load.,{'ID': '177_UK_DocM_V2_AccessAndUseOfBuildings'},Control should be maximised and heat gain to <e1>uninsulated</e1> <e2>pipes</e2> should only be permitted where the proportion of the cooling load relating to distribution pipework is less than 1 of the total load.,selection,annotated
+a4dc06ab-99c3-4c8b-b295-eb3e6a64320a_2,,,"The free <e1>both sides</e1> from the ground or from the surface of a driveway or walkway of the lower edge of a structural element, device or equipment protruding from the building, such as a balcony, bay window, sign, lighting device or awning, must be at least <e2>850-1000mm</e2>, unless the area is protected so as to prevent the danger of collision.",greater-equal,synthetic
+72b3e031-a732-4749-af3e-ffd5c635e830,Boards should be fitted to the structure to avoid any gaps between board edges and between the board facings.,{'ID': '145_UK_DocL_V1_ConsrvationOfFuelAndPower'},Boards should be <e1>fitted to the structure</e1> to <e2>avoid any gaps between board edges and between the board facings</e2>.,selection,annotated
+6ec243f2-9294-4b7c-89a4-1c46e4a69cc9_8,,,"If site constraints necessitate an <e1>fridge</e1> of <e2>600 millimetres</e2> or steeper, an approach incorporating ramped access should be provided.",greater-equal,synthetic
+01008f69-874b-443e-bcb2-2f5630280049_0,,,"If stairs are used only as an emergency exit and if they lead to spaces in a dwelling or accommodation facility other than those that are necessary for living, the <e1>from the top and bottom corners of the door</e1> may be no more than <e2>1,500 millimetres</e2> and the tread must be no less than 220 millimetres.",less-equal,synthetic
+aa41a5d4-c0b1-4da7-84a0-5c2e2738654f_7,,,The total number of ventilators installed in the dwellings habitable rooms and kitchens should be at least the following: Five ventilators if the dwelling has more than <e1>certain proportion</e1> <e2>areas</e2>.,greater,synthetic
+6465e5b9-4c10-41ec-9839-3e7cb7114911,Programmable room thermostats with an override feature should be provided for all direct electric zones of the electric underfloor heating system.,{'ID': '314_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Programmable</e1> <e2>room thermostats</e2> with an override feature should be provided for all direct electric zones of the electric underfloor heating system.,selection,annotated
+78094ea9-f870-40e9-8174-8dfce8f30a90,The penetrating services should be sealed to the air barrier using proprietary grommets or collars with air-sealing tape or sealant.,{'ID': '181_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>penetrating services</e1> should be <e2>sealed to the air barrier</e2> using proprietary grommets or collars with air-sealing tape or sealant.,necessity,annotated
+77be05f2-cd8c-4d35-85e4-6637b999d8e7,The value of the consequential improvement works should not be less than 10 of the value of the principal works.,{'ID': '452_UK_DocM_V2_AccessAndUseOfBuildings'},The <e1>value</e1> of the consequential <e2>improvement works</e2> should not be less than 10 of the value of the principal works.,part-of,annotated
+7d877df3-9aa7-4dff-a64d-5356a66c944d_1,,,"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a <e1>differences</e1> exceeding <e2>9 metres</e2> and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",greater,synthetic
+891e9eee-4a4b-4d7c-8051-3aee8302cd6b,"Walls: insulation should be fitted without any air gaps and tight to the structure, cavity closers, lintels and cavity trays.",{'ID': '141_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Walls: <e1>insulation</e1> should be <e2>fitted without any air gaps</e2> and tight to the structure, cavity closers, lintels and cavity trays.",necessity,annotated
+642e2c46-45a8-440f-af0b-1b53f41d8d8f,Taps and WC cubicle doors should be operable by people with limited strength or manual dexterity and doors to cubicles should be capable of being opened if a person has collapsed against them while inside the cubicle.,{'ID': '156_UK_DocM_V2_AccessAndUseOfBuildings'},Taps and WC cubicle doors should be operable by people with limited strength or manual dexterity and <e1>doors</e1> to cubicles should be <e2>capable of being opened if a person has collapsed against them while inside the cubicle</e2>.,necessity,annotated
+bf798097-bb99-42d0-a73f-8cebab8fbeb8_3,,,"In the entrance halls and other indoor areas of administrative, service and business premises and in assembly areas, the riser of the steps must be no more than 160 millimetres and the <e1>storage capacity</e1> must be no less than <e2>100 litres</e2>.",greater-equal,synthetic
+4abb3268-3ba6-47e8-a8b7-4676dbaa9a16_1,,,"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide all means of escape routes with a minimum clear <e1>efficiency</e1> of <e2>850-1000mm</e2>, except in doorways.",equal,synthetic
+17fba530-c42b-4eeb-85dd-16da0bacc49c,"Areas that are not enclosed, such as open floors, covered ways and balconies, should be excluded.",{'ID': '470_UK_DocL_V1_ConsrvationOfFuelAndPower'},"<e1>Areas</e1> that are not enclosed, such as open floors, covered ways and <e2>balconies</e2>, should be excluded.",selection,annotated
+7e34700e-92de-4b00-a820-f4085a2e186c_4,,,"If the free gap between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than 2 metres, the wall in question must be <e1>number of people evacuating</e1> <e2>1,200 MJ/m2</e2>.",equal,synthetic
+f7f1a609-ae35-4544-9b38-e471d7a00666,"In order to enhance the efficiency of firefighting and rescue operations, means of smoke extraction shall be designed and constructed in the building so that smoke can be extracted from the different premises in the building.",{'ID': '249_Finnish_FireSafety'},"In order to enhance the <e1>efficiency</e1> of <e2>firefighting and rescue operations</e2>, means of smoke extraction shall be designed and constructed in the building so that smoke can be extracted from the different premises in the building.",part-of,annotated
+7577d9f7-9f3c-4d3b-b8d9-da31d3e1b201,"For example, glare and reflections from shiny surfaces, and large repeating patterns, should be avoided in spaces where visual acuity is critical as they will hamper communication for people with impaired vision, and those who lip read or use sign language.",{'ID': '150_UK_DocM_V2_AccessAndUseOfBuildings'},"For example, <e1>glare and reflections</e1> from shiny <e2>surfaces</e2>, and large repeating patterns, should be avoided in spaces where visual acuity is critical as they will hamper communication for people with impaired vision, and those who lip read or use sign language.",part-of,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",{'ID': '85_Finnish_Health-IndoorClimateAndVentilation'},"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the <e1>total extract air flow</e1> from these spaces does not exceed <e2>10</e2> of the total air flow in the vertical duct.",less-equal,annotated
+f72a98f3-b7d2-4633-b244-0d7242dfb0c9,Every single bedroom has a minimum floor area of 8.5m2 and is at least 2.4m wide.,{'ID': '102_UK_DocM_V1_AccessAndUseOfBuildings'},Every single bedroom has a minimum floor area of 8.5m2 and is at least <e1>2.4m</e1> <e2>wide</e2>.,greater-equal,annotated
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_1,,,"In buildings more than <e1>0.3</e1> and at most 28 metres in <e2>sum total</e2>, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",greater,synthetic
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_0,,,Skirtings totalling up to 50mm total thickness and shallow projecting ducts or <e1>Sewers</e1> above <e2>E</e2> may be discounted when measuring clear width.,greater,synthetic
+f6add908-4d45-4b3e-83a6-369f6c36c037,"Door rails, stiles and muntins should be at least 44mm thick.",{'ID': '28_UK_DocQ_Security_Dwellings'},"Door rails, stiles and muntins should be at least <e1>44mm</e1> <e2>thick</e2>.",greater-equal,annotated
+0da52584-1b37-48b5-840f-3795ae695275,the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,{'ID': '119_UK_DocM_V2_AccessAndUseOfBuildings'},the minimum clear dimensions of the <e1>platform</e1> are: 1100mm <e2>wide</e2> and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,none,annotated
+23867bb3-e845-48ca-9ee8-72010a55aa42,WC doors must be capable of opening outwards.,{'ID': '124_UK_DocM_V1_AccessAndUseOfBuildings'},<e1>WC doors</e1> must be <e2>capable of opening outwards</e2>.,necessity,annotated
+ccc405a0-c6d6-4ace-ad70-e0cfe07cd1e3,"Stairs, ladders and ramps shall be so designed, constructed and installed as to be safe for people moving between different levels in or about the building.",{'ID': '14_UK_DocK_ProtectionFromFalling'},"Stairs, <e1>ladders</e1> and ramps shall be so <e2>designed, constructed and installed as to be safe for people moving between different levels in or about the building</e2>.",necessity,annotated
+ef4f54b6-1099-4404-9fa2-d0c0d5e55543_5,,,The <e1>distance of the basement storey floor from the entry level</e1> must not exceed the individual dwellings <e2>value</e2>.,less-equal,synthetic
+a86b58e8-046f-44b7-8e1b-00c876c8c647,"Parapets in categories A to E and panel parts of walls acting as parapets, as well as their fasteners, shall be designed to the concentrated load Qk = 0.3 kN acting on a random spot.",{'ID': '30_Finnish_StabilityOfStructures'},"Parapets in <e1>categories</e1> A to <e2>E</e2> and panel parts of walls acting as parapets, as well as their fasteners, shall be designed to the concentrated load Qk = 0.3 kN acting on a random spot.",less-equal,annotated
+389c960b-525d-4f2e-9a2c-1805eb2dc20d_0,,,The full <e1>span</e1> under a stair that forms part of the storage provision should be counted as <e2>220 millimetres</e2>.,equal,synthetic
+d3fc8c9b-c23a-4188-8723-369caa90453c,"The reference value for a building's total combined window area is 15 of the sum total of the floor  plate areas  of  the  buildings  storeys that  are  fully  or in  part  above  the  ground  but, however, at most 50 of the building's facade area.",{'ID': '124_Finnish_EnergyEfficiency'},"The reference value for a building's total combined window area is 15 of the sum total of the floor plate areas of the buildings <e1>storeys</e1> that are fully or in part above the ground but, however, at most <e2>50</e2> of the building's facade area.",none,annotated
+7d7d55f1-b28d-4ce8-aec6-dd4dc0786ce8,"For sizes of cylinder not listed, the heat loss from the cylinder should not exceed (16.66 8.33 V0.4)/(1000 24), where V is the volume in litres.",{'ID': '208_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For <e1>sizes</e1> of cylinder <e2>not listed</e2>, the heat loss from the cylinder should not exceed (16.66 8.33 V0.4)/(1000 24), where V is the volume in litres.",selection,annotated
+38745b5e-4dea-43fe-9378-5befa5a2399d,A copy of the completed commissioning sheet should be given to the owner of the building.,{'ID': '99_UK_DocF_V2_Ventilation'},A <e1>copy</e1> of the completed <e2>commissioning sheet</e2> should be given to the owner of the building.,part-of,annotated
+fa90c179-d32c-412b-a7d6-a515cc91dbdb,The structure of the exterior wall against the ground must be waterproofed or isolated against water pressure or a structurally managed water removal system allowing the cellar wall to dry in an outward direction must be used to prevent moisture from the surrounding ground and storm water from penetrating the wall structure.,{'ID': '86_Finnish_Health-Humidity'},The structure of the <e1>exterior wall</e1> against the ground must be waterproofed or <e2>isolated against water pressure</e2> or a structurally managed water removal system allowing the cellar wall to dry in an outward direction must be used to prevent moisture from the surrounding ground and storm water from penetrating the wall structure.,none,annotated
+19478a13-7457-4dd3-a394-744f826db7b0,"The handle to at least one window in the principal living area is 700-1000mm above floor level, unless fitted with a remote opening device that is within this height range.",{'ID': '127_UK_DocM_V1_AccessAndUseOfBuildings'},"The handle to at least one window in the principal living area is 700-1000mm above floor level, unless fitted with a <e1>remote opening device</e1> that is <e2>within this height range</e2>.",selection,annotated
+333110c1-ba9e-4c1d-9249-6604f49ba09a,"The presence of doors, whether open or closed, should be apparent to visually impaired people through the careful choice of colour and material for the door and its surroundings.",{'ID': '91_UK_DocM_V2_AccessAndUseOfBuildings'},"The presence of <e1>doors</e1>, whether open or closed, should be <e2>apparent to visually impaired people through the careful choice of colour and material for the door and its surroundings</e2>.",none,annotated
+2be01bf1-2cd9-4982-8778-ba0afe835580,"If fans and background ventilators are fitted in the same room, they should be at least 500mm apart.",{'ID': '88_UK_DocF_V1_Ventilation'},"If fans and background ventilators are fitted in the <e1>same</e1> <e2>room</e2>, they should be at least 500mm apart.",selection,annotated
+35cacecf-06dc-4b0f-aadb-db2ee05518c7_8,,,"The area of windows and roof windows (but excluding display windows) <e1>protect persons operating, maintaining or altering the installations from fire or injury</e1> exceeds <e2>100 litres</e2> of the facade area.",greater,synthetic
+75c60084-6878-472d-8694-e8739e0dd76c_11,,,The <e1>surface area</e1> of access routes in assembly areas with a maximum capacity of 60 persons must be at least <e2>600 millimetres</e2>.,greater-equal,synthetic
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_5,,,"In buildings more than 9 metres and at most <e1>60</e1> in <e2>continuity</e2>, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",less-equal,synthetic
+793cb939-b3d9-46eb-ae65-71a4d5c8031b,Where the parking is within the private curtilage of the dwelling (but not within a carport or garage) at least one space is a standard parking bay that can be widened to 3.3m.,{'ID': '43_UK_DocM_V1_AccessAndUseOfBuildings'},Where the parking is within the private curtilage of the dwelling (but not within a carport or garage) at least one space is a standard parking bay that can be <e1>widened</e1> to <e2>3.3m</e2>.,less-equal,annotated
+9ff8b8fd-5361-4c3d-9a7e-7459276c8df7,The dwelling fabric energy efficiency rate must not exceed the individual dwellings target fabric energy efficiency rate.,{'ID': '66_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>dwelling fabric energy efficiency rate</e1> must not exceed the individual dwellings <e2>target fabric energy efficiency rate</e2>.,less-equal,annotated
+50e89a86-e2be-439d-b230-79274cd7199b_4,,,Modular and portable buildings with a planned <e1>going</e1> of more than <e2>90</e2> at a single location should be shown to comply with the energy efficiency requirements.,greater,synthetic
+e3b85ad6-6132-40d7-86f8-3cc5d44eb12c_2,,,<e1>certain proportion</e1> <e2>acoustic design</e2> should be close to an accessible bathroom suitable for a wheelchair user.,equal,synthetic
+d9b8f957-49e3-45d0-83ca-c0419a50361a,"In a mechanical system, there shall be a clearly labelled stop switch, which shall be located in an easily accessible place.",{'ID': '48_Finnish_Health-IndoorClimateAndVentilation'},"In a mechanical <e1>system</e1>, there shall be a clearly labelled <e2>stop switch</e2>, which shall be located in an easily accessible place.",necessity,annotated
+46f5be2a-1514-420b-bc39-331fc6e0d2df_4,,,"The dwelling primary energy rate, dwelling emission rate and <e1>facade area</e1>, all calculated using the measured air permeability, must not be higher than the target primary energy rate, target emission rate and <e2>SEER</e2>, respectively.",less-equal,synthetic
+6c789809-b1b8-429a-8fe2-8ce16f8a4b54_0,,,Air flows in the continuous working area of a parking garage for motor vehicles shall be designed so that the <e1>maximum number of occupants</e1> does not exceed <e2>18 dm3/s</e2>.,less-equal,synthetic
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",{'ID': '75_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the <e1>total cost</e1> of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the <e2>total cost</e2> of the major renovation.",none,annotated
+c72a5952-2e0b-4d4a-9185-09e4149b6239,The flooring functioning as waterproofing or waterproofing located underneath the flooring in wet rooms must have a watertight connection with the waterproofing of the wall.,{'ID': '114_Finnish_Health-Humidity'},The flooring functioning as waterproofing or <e1>waterproofing</e1> <e2>located underneath the flooring in wet rooms</e2> must have a watertight connection with the waterproofing of the wall.,selection,annotated
+4c83069b-8c22-43ad-92a0-354ecd0e40a1,"Sufficient information should be provided to ensure that people can operate, maintain or alter an electrical installation with reasonable safety.",{'ID': '7_UK_DocP_ElectricalSafety'},"<e1>Sufficient</e1> information should be <e2>provided to ensure that people can operate, maintain or alter an electrical installation with reasonable safety</e2>.",none,annotated
+2f0f22aa-06d3-478d-a777-5aca5c2fb5c1,"For sliding doors and gates, provide both of the following: (i) a stop or other effective means to prevent them coming off the end of the track; (ii) a retaining rail to prevent doors and gates falling if the suspension system fails or the rollers leave the track.",{'ID': '120_UK_DocK_ProtectionFromFalling'},"For sliding <e1>doors</e1> and gates, provide both of the following: (i) a stop or other effective <e2>means</e2> to prevent them coming off the end of the track; (ii) a retaining rail to prevent doors and gates falling if the suspension system fails or the rollers leave the track.",selection,annotated
+75c60084-6878-472d-8694-e8739e0dd76c,The width of access routes in assembly areas with a maximum capacity of 60 persons must be at least 900 millimetres.,{'ID': '115_Finnish_SafetyOfUse'},The <e1>width</e1> of access routes in assembly areas with a maximum capacity of 60 persons must be at least <e2>900 millimetres</e2>.,greater-equal,annotated
+a86b58e8-046f-44b7-8e1b-00c876c8c647_1,,,"Parapets in <e1>either side</e1> A to <e2>65 degrees Celsius</e2> and panel parts of walls acting as parapets, as well as their fasteners, shall be designed to the concentrated load Qk = 0.3 kN acting on a random spot.",less-equal,synthetic
+d504fd87-d13d-4936-9d7a-71d17954760d_0,,,The <e1>away</e1> of the steps in an exit may be no more than <e2>35 mg/m3 (30 ppm)</e2>.,less-equal,synthetic
+4f2b56cb-9852-4406-bbea-31f426fb4910,"replacing a heating system including the heating appliance, pipework and heat emitters), the energy performance of the whole system should be assessed, and the results documented and handed over to the building owner with the manufacturers supporting literature.",{'ID': '397_UK_DocM_V2_AccessAndUseOfBuildings'},"replacing a <e1>heating system</e1> including the <e2>heating appliance</e2>, pipework and heat emitters), the energy performance of the whole system should be assessed, and the results documented and handed over to the building owner with the manufacturers supporting literature.",selection,annotated
+12907c6f-e734-436d-a7de-c8a1626fbe92,"Both:the area of rooflights exceeds 20 of the area of the roof, and the design solar load exceeds 25W/m2.",{'ID': '496_UK_DocM_V2_AccessAndUseOfBuildings'},"Both:the area of rooflights exceeds 20 of the <e1>area</e1> of the <e2>roof</e2>, and the design solar load exceeds 25W/m2.",part-of,annotated
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the <e1>construction</e1> of a new building as well as in repair and alteration work corresponding to the <e2>construction</e2> of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",none,annotated
+e26e2280-635f-44b5-967c-6cf0b56e15de,Water pipes that are located in cold premises shall be thermally insulated.,{'ID': '86_Finnish_Health-WaterAndSewerage'},<e1>Water pipes</e1> that are <e2>located in cold premises</e2> shall be thermally insulated.,selection,annotated
+2f815a08-db3c-48a6-b248-d69aeac870ee,"the vertical travel distance is: a. not more than 2m, where there is no liftway enclosure and no floor penetration; b. more than 2m, where there is a liftway enclosure.",{'ID': '173_UK_DocM_V2_AccessAndUseOfBuildings'},"the vertical travel distance is: a. not more than 2m, <e1>where there is no liftway enclosure and no floor penetration</e1>; b. more than 2m, <e2>where there is a liftway enclosure</e2>.",none,annotated
+5869233a-4fc0-48bf-9007-2b0c9a169fef,"A building shall, if its size, number of storeys or an intended purpose of a premises within the building so requires, be divided into fire compartments in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",{'ID': '100_Finnish_FireSafety'},"A building shall, if its size, number of storeys or an intended purpose of a <e1>premises</e1> within the building so requires, be divided into fire compartments in order to restrict the spread of fire and smoke, to provide safe evacuation and to <e2>facilitate rescue and extinguishing measures</e2>.",none,annotated
+328fb8e7-cae4-4465-b7a7-24f0d066d65a,"The results of all pressure tests on buildings, including any test failures, should be reported to the building control body.",{'ID': '360_UK_DocM_V2_AccessAndUseOfBuildings'},"The results of all pressure tests on <e1>buildings</e1>, including any test failures, should be <e2>reported to the building control body</e2>.",none,annotated
+6543949e-dd47-4365-b5a9-d952bf233cd7,"Any manual high rate controls should be provided locally to the spaces being served, e.g. bathrooms and kitchens.",{'ID': '66_UK_DocF_V1_Ventilation'},"Any manual <e1>high rate controls</e1> should be <e2>provided locally to the spaces being served</e2>, e.g. bathrooms and kitchens.",necessity,annotated
+c8a048c6-8e7e-4b5a-ada5-02990b983401,"A natural ventilation system, a mechanical extract ventilation system or a mechanical supply and extract ventilation system shall not be designed to be combined in such a way that the directions of air flow between the rooms and in the ductworks may change when the air flows are being controlled.",{'ID': '91_Finnish_Health-IndoorClimateAndVentilation'},"A natural ventilation system, a mechanical <e1>extract ventilation system</e1> or a mechanical <e2>supply and extract ventilation system</e2> shall not be designed to be combined in such a way that the directions of air flow between the rooms and in the ductworks may change when the air flows are being controlled.",none,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",{'ID': '83_Finnish_SafetyOfUse'},"The free <e1>opening</e1> of the vertical <e2>hatch</e2> or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",part-of,annotated
+33ed3038-99a6-4b2d-906a-a1db21f2d898,"For heating systems in new dwellings, or when a heat generator such as a boiler is replaced in an existing dwelling, each room should be provided with thermostatic room controls.",{'ID': '250_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For heating systems in new dwellings, or when a <e1>heat generator</e1> such as a <e2>boiler</e2> is replaced in an existing dwelling, each room should be provided with thermostatic room controls.",selection,annotated
+e4fb8d18-8dbc-4351-a2df-d87f880f476a_10,,,The <e1>facade area</e1> for balconies is <e2>50</e2> that of the load-bearing structures of the storey.,equal,synthetic
+aa41a5d4-c0b1-4da7-84a0-5c2e2738654f,The total number of ventilators installed in the dwellings habitable rooms and kitchens should be at least the following: Five ventilators if the dwelling has more than one bedroom.,{'ID': '89_UK_DocF_V1_Ventilation'},The total number of ventilators installed in the dwellings habitable rooms and kitchens should be at least the following: Five ventilators if the <e1>dwelling</e1> has more than <e2>one</e2> bedroom.,none,annotated
+ffc11c58-ff7e-45f4-a5c7-da59404e5659,"Reasonable provision shall be made in the design and installation of electrical installations in order to protect persons operating, maintaining or altering the installations from fire or injury.",{'ID': '1_UK_DocP_ElectricalSafety'},"Reasonable provision shall be made in the design and <e1>installation</e1> of <e2>electrical installations</e2> in order to protect persons operating, maintaining or altering the installations from fire or injury.",part-of,annotated
+c3cfbf29-a95f-4453-a7de-a8f6e4ca2ea8,"If sand, sludge, grease, petrol, oil or other detrimental physical or chemical substances may end up in the sewerage system or network or in the environment, the sewerage system shall be equipped with a separator or treatment device.",{'ID': '152_Finnish_Health-WaterAndSewerage'},"If sand, sludge, grease, petrol, <e1>oil</e1> or other detrimental physical or chemical substances may <e2>end up in the sewerage system or network or in the environment</e2>, the sewerage system shall be equipped with a separator or treatment device.",selection,annotated
+793cb939-b3d9-46eb-ae65-71a4d5c8031b_5,,,Where the parking is within the private curtilage of the dwelling (but not within a carport or garage) at least one space is a standard parking bay that can be <e1>frequency</e1> to <e2>10</e2>.,less-equal,synthetic
+eeb4239f-3819-475c-ad20-756bed80c4ff_8,,,"In reference heat loss calculations, the value used as the <e1>travel</e1> of the buildings ventilation system shall be <e2>5m</e2>.",equal,synthetic
+a2f3a871-91d5-4777-95c9-4744792b3a69,"in an existing building, for the principal or main staff entrance or entrances to be accessible, an alternative accessible entrance should be provided.",{'ID': '61_UK_DocM_V2_AccessAndUseOfBuildings'},"in an existing <e1>building</e1>, for the principal or main staff entrance or entrances to be accessible, an alternative accessible <e2>entrance</e2> should be provided.",necessity,annotated
+e874f337-2067-4e77-ad32-c3b857f40e7a_3,,,"If the <e1>opening</e1> exceeds <e2>2m</e2>, the total minimum width of the exits shall be calculated by increasing the original 1,200 millimetres by 400 millimetres for each additional group of 60 people.",greater,synthetic
+203faa23-7b71-47c9-a6e5-2333ac45389e_11,,,"The riser of the indoor steps of dwelling units and living quarters may be no more than 190 millimetres, and the <e1>annual efficiency of heat recovery from ventilation extract air</e1> must be no less than <e2>10 kN</e2>.",greater-equal,synthetic
+a8b3e54e-902c-4502-99a2-8c41d46f1416_8,,,"If there are more than <e1>six metres</e1> <e2>properties</e2> in a space, they must be linked to one another in at least four groups, unless the chairs are placed around tables.",greater,synthetic
+108b5709-f035-4697-ba25-56edd2ce60fc,"Where permanent or removable seating is provided as part of the design, allowance should be made for disabled people to have a choice of seating location at spectator events.",{'ID': '126_UK_DocM_V2_AccessAndUseOfBuildings'},"Where permanent or <e1>removable</e1> seating is <e2>provided as part of the design</e2>, allowance should be made for disabled people to have a choice of seating location at spectator events.",none,annotated
+a94b6b4f-a05e-403e-bbca-ebe1b94e38a1,"The area of sloping surfaces such as staircases, galleries, raked auditoria and tiered terraces should be taken as their area on plan.",{'ID': '470_UK_DocM_V2_AccessAndUseOfBuildings'},"The area of sloping surfaces such as <e1>staircases</e1>, <e2>galleries</e2>, raked auditoria and tiered terraces should be taken as their area on plan.",none,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",{'ID': '84_Finnish_Health-IndoorClimateAndVentilation'},"If the air flows of extract air categories 1 and 2 are <e1>combined into the same duct</e1> and category 2 air flow accounts for more than 10 of the <e2>combined</e2> air flow, the combined air flow is classified under category 2.",none,annotated
+50e89a86-e2be-439d-b230-79274cd7199b,Modular and portable buildings with a planned service life of more than two years at a single location should be shown to comply with the energy efficiency requirements.,{'ID': '81_UK_DocM_V2_AccessAndUseOfBuildings'},Modular and portable <e1>buildings</e1> with a planned <e2>service life</e2> of more than two years at a single location should be shown to comply with the energy efficiency requirements.,part-of,annotated
+2afa8bba-b5ad-4e12-bc27-4beea3fd09b2_8,,,The normal relationship between the <e1>air flow</e1> of the rise and going is: <e2>15mm</e2> equals between 550mm and 700mm.,equal,synthetic
+8efb6108-e49e-4d64-a1e4-22e3f9128b17_0,,,"When calculating the reference heat loss of a building, the value of <e1>3.3m</e1> shall be used as the <e2>habitable area</e2> for the air leakage rate figure for the building envelope.",equal,synthetic
+35cacecf-06dc-4b0f-aadb-db2ee05518c7,The area of windows and roof windows (but excluding display windows) within the area served exceeds 40 of the facade area.,{'ID': '495_UK_DocM_V2_AccessAndUseOfBuildings'},The <e1>area</e1> of windows and roof windows (but excluding display windows) <e2>within the area served</e2> exceeds 40 of the facade area.,necessity,annotated
+d0b6759e-deec-451d-bd7a-ec65b96048be_7,,,"extract air of <e1>fire resistance time</e1> <e2>8.5m2</e2> shall be conducted through individual ducts, or common ducts serving spaces of the same type as regards level of air purity, to the outdoors, into a collection duct installed above the spaces it serves or into an extract air chamber.",equal,synthetic
+d178dd92-6cf3-4f68-a9ba-44b97d74204a,"Staircases must be safe, sufficiently spacious and suitable for their purpose.",{'ID': '13_Finnish_SafetyOfUse'},"<e1>Staircases</e1> must be safe, sufficiently spacious and <e2>suitable for their purpose</e2>.",necessity,annotated
+d3e7a947-536e-4a49-9823-e27fc0f68b27,Length of landings to be at least equal to the width of the ramp.,{'ID': '66_UK_DocK_ProtectionFromFalling'},<e1>Length</e1> of landings to be at least equal to the <e2>width</e2> of the ramp.,greater-equal,annotated
+6c789809-b1b8-429a-8fe2-8ce16f8a4b54,Air flows in the continuous working area of a parking garage for motor vehicles shall be designed so that the instantaneous carbon monoxide concentration does not exceed 7 mg/m3 (6 ppm).,{'ID': '62_Finnish_Health-IndoorClimateAndVentilation'},Air flows in the continuous <e1>working area</e1> of a <e2>parking garage</e2> for motor vehicles shall be designed so that the instantaneous carbon monoxide concentration does not exceed 7 mg/m3 (6 ppm).,part-of,annotated
+793cb939-b3d9-46eb-ae65-71a4d5c8031b_7,,,Where the <e1>garage doorset</e1> is within the private curtilage of the dwelling (but not within a carport or <e2>compliance checklist</e2>) at least one space is a standard parking bay that can be widened to 3.3m.,not-part-of,synthetic
+bfdf95da-d422-47cd-83d7-a30a4969f2e6_5,,,"If the internal ties must be centred on the supporting line, the minimum value of the <e1>fire performance</e1>, <e2>50mm</e2>, will also be applied to internal ties.",greater-equal,synthetic
+5ca184fa-e100-4f97-957d-e37ae944786f_1,,,The <e1>insulating performance</e1> of installing electric vehicle charge points and cable routes is not more than <e2>60 persons</e2> of the total capital cost of the major renovation.,less-equal,synthetic
+aa7c5790-2189-451d-bd0e-956a257a7b6d,"In an existing system, when a boiler or hot water storage vessel is replaced, any accessible pipes in the dwelling should be insulated.",{'ID': '201_UK_DocL_V1_ConsrvationOfFuelAndPower'},"In an existing system, when a boiler or hot water storage vessel is replaced, any <e1>accessible</e1> <e2>pipes</e2> in the dwelling should be insulated.",selection,annotated
+868ad193-b0d2-47b9-9fe0-ded5b761d3b0,The integrity of the water system shall be ensured with pressure testing using water.,{'ID': '106_Finnish_Health-WaterAndSewerage'},The integrity of the <e1>water system</e1> shall be <e2>ensured with pressure testing using water</e2>.,none,annotated
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be <e1>fitted with a floor drain</e1> shall be: 1. showers and bathrooms as well as <e2>wash rooms</e2> in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",none,annotated
+cc72106e-9e7f-47cf-8a95-0173a8305dad_11,,,"In a new building, the crawl space <e1>dwelling emission rate</e1> must be <e2>55</e2> on average at the minimum.",greater-equal,synthetic
+77f993c6-dff1-4f9a-8f66-73221d3cbaff,"If the dwelling only has one habitable room, a minimum ventilation rate of 13l/s should be used.",{'ID': '43_UK_DocF_V1_Ventilation'},"If the dwelling only has <e1>one</e1> <e2>habitable room</e2>, a minimum ventilation rate of 13l/s should be used.",equal,annotated
+bfb006bb-c7f5-4586-adc3-89c758d4d99d,The system should be specified and installed according to the manufacturers instructions to ensure the overall performance of the system meets a reasonable standard.,{'ID': '332_UK_DocM_V2_AccessAndUseOfBuildings'},The <e1>system</e1> should be <e2>specified and installed according to the manufacturers instructions to ensure the overall performance of the system meets a reasonable standard</e2>.,necessity,annotated
+1913381b-a2cc-496e-9168-82ccf2a01d50,"In connection with repair and alteration work, the heat emitters connected to the domestic hot water ring duct may be replaced so that the heat emission capacity of the heat emitters to be installed does not exceed 200 Watts per room.",{'ID': '67_Finnish_Health-WaterAndSewerage'},"In connection with repair and alteration work, the <e1>heat emitters</e1> connected to the domestic <e2>hot water ring duct</e2> may be replaced so that the heat emission capacity of the heat emitters to be installed does not exceed 200 Watts per room.",part-of,annotated
+4d80c4d1-08ee-481a-9f9c-e9151ce1094d_1,,,"The <e1>height</e1> of windows, roof windows, rooflights and doors should not exceed <e2>1</e2> of the total floor area of the dwelling.",less-equal,synthetic
+47b51cfa-bda8-4971-83c1-5aa198c59297,The loading area must be safe and appropriate.,{'ID': '135_Finnish_SafetyOfUse'},The <e1>loading area</e1> must be safe and <e2>appropriate</e2>.,necessity,annotated
+371e1755-8bb5-456e-bf66-5a50f4c19d59,"Where there is full-height structural guarding, if you provide a second (lower) handrail, the vertical height from the pitch line of the steps (or the surface of the ramp) to the top of the second (lower) handrail should be 600mm.",{'ID': '50_UK_DocK_ProtectionFromFalling'},"Where there is <e1>full-height structural</e1> <e2>guarding</e2>, if you provide a second (lower) handrail, the vertical height from the pitch line of the steps (or the surface of the ramp) to the top of the second (lower) handrail should be 600mm.",selection,annotated
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_2,,,"The wall ties should have a <e1>height</e1> of <e2>400-600mm</e2> and a vertical spacing of 450mm, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",equal,synthetic
+2f815a08-db3c-48a6-b248-d69aeac870ee_9,,,"the vertical <e1>internal temperature</e1> is: a. not more than <e2>60 persons</e2>, where there is no liftway enclosure and no floor penetration; b. more than 2m, where there is a liftway enclosure.",less-equal,synthetic
+4e8c5c50-44af-48f6-b959-e6f9b31afa1e,"If the planned time of use of a modular or portable building in a single location is less than two years, the only practical heating technology may be electric resistance heating.",{'ID': '89_UK_DocM_V2_AccessAndUseOfBuildings'},"If the <e1>planned time of use</e1> of a modular or portable building <e2>in a single location</e2> is less than two years, the only practical heating technology may be electric resistance heating.",selection,annotated
+f420ae57-5656-4558-b1a3-1079e46bf6cc,"In the case of the storey-level door of a dwelling, or if the number of people evacuating through the door exceeds 60, doors must open in the direction of the exit.",{'ID': '223_Finnish_FireSafety'},"In the case of the storey-level door of a dwelling, or if the <e1>number of people evacuating</e1> through the <e2>door</e2> exceeds 60, doors must open in the direction of the exit.",part-of,annotated
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c_8,,,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be <e1>horizontal spacing</e1> <e2>65mm</e2>.",equal,synthetic
+1c511111-ab71-4b68-9421-f588bc4b9180,"People with visual impairment should be in no doubt as to the location of glass doors, especially when they are within a glazed screen.",{'ID': '76_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>People</e1> <e2>with visual impairment</e2> should be in no doubt as to the location of glass doors, especially when they are within a glazed screen.",necessity,annotated
+56517433-cf40-4b88-a9d4-18e61e0e9993_10,,,"In addition, on both sides of the toilet seat there shall be a <e1>flights</e1> of at least <e2>180 millimetres</e2>.",greater-equal,synthetic
+c5a6cac6-a314-47b1-aabd-13f2d1b7ad56,A step-free approach route should be provided to all private entrances.,{'ID': '71_UK_DocM_V1_AccessAndUseOfBuildings'},A step-free <e1>approach route</e1> should be provided to all private <e2>entrances</e2>.,necessity,annotated
+e15250c0-1279-4d29-a1ec-31560b045007_6,,,<e1>chambers</e1> of basement storeys must not be connected to fire and smoke-proof <e2>water meters</e2>.,not-part-of,synthetic
+009e12eb-db83-485c-9ffc-e1f462251109,Each air terminal should have a free area of at least 90 of the free area of its associated duct.,{'ID': '115_UK_DocF_V1_Ventilation'},Each <e1>air terminal</e1> should have a <e2>free area</e2> of at least 90 of the free area of its associated duct.,necessity,annotated
+536b172d-ccd1-479a-8136-6ee05db0f264,"Where pipework is above ground, the performance of the pipe insulation should be at least as high as the insulating performance of pipework in the buried part of the system.",{'ID': '205_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where pipework is above ground, the performance of the pipe insulation should be at least as high as the insulating performance of pipework in the <e1>buried part</e1> of the <e2>system</e2>.",part-of,annotated
+984c252b-74f4-4d85-9080-1c8ae1851eca_7,,,"If performance requires thicker glass to be used, an equivalent window unit with <e1>reception</e1> (<e2>400kg</e2>) glazing should be shown to meet the required standard.",equal,synthetic
+2cb4937d-9ec4-4013-8e9b-318a8adae27a,Account should be taken of outside noise when considering whether openable windows are appropriate for purge ventilation.,{'ID': '24_UK_DocF_V1_Ventilation'},<e1>Account</e1> should be <e2>taken of outside noise</e2> when considering whether openable windows are appropriate for purge ventilation.,necessity,annotated
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3_0,,,"Where the cost of installing only cable routes is more than 7% of the total cost of the major <e1>boxings</e1>, there is no <e2>mortice lock</e2> to install either electric vehicle charge points or cable routes.",not-part-of,synthetic
+e7cc3da8-211a-4244-b711-210a912ca2ac,Ground floors and those in contact with the outside of the dwelling should be insulated to limit heat losses to not more than 10W/m2.,{'ID': '302_UK_DocL_V1_ConsrvationOfFuelAndPower'},Ground floors and <e1>those</e1> in contact with the outside of the dwelling should be <e2>insulated to limit heat losses to not more than 10W/m2</e2>.,necessity,annotated
+bb3ac5b0-14d0-4d75-95d9-713adc6f2f58,"Any walls, doors and windows should be insulated and draught-proofed to at least the same extent as in the existing dwelling.",{'ID': '433_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Any <e1>walls</e1>, doors and windows should be <e2>insulated</e2> and draught-proofed to at least the same extent as in the existing dwelling.",necessity,annotated
+e874f337-2067-4e77-ad32-c3b857f40e7a_9,,,"If the <e1>annual percentage of heat</e1> exceeds <e2>50mm</e2>, the total minimum width of the exits shall be calculated by increasing the original 1,200 millimetres by 400 millimetres for each additional group of 60 people.",greater,synthetic
+0096a3bf-ac16-4a75-adf9-8c3f4a9b8610,The smaller dimension of each panel which can be either the width or height of the panel should be 230mm or less.,{'ID': '33_UK_DocQ_Security_Dwellings'},The smaller <e1>dimension</e1> of each panel which can be either the <e2>width</e2> or height of the panel should be 230mm or less.,selection,annotated
+8b9e1d32-efa8-409b-873b-22e2eae5b537,External walls and their various layers must form a whole that prevents water from harmfully penetrating into the structures.,{'ID': '95_Finnish_Health-Humidity'},<e1>External</e1> <e2>walls</e2> and their various layers must form a whole that prevents water from harmfully penetrating into the structures.,selection,annotated
+203faa23-7b71-47c9-a6e5-2333ac45389e_5,,,"The riser of the indoor steps of dwelling units and living quarters may be no more than 190 millimetres, and the <e1>sizes</e1> must be no less than <e2>0.3</e2>.",greater-equal,synthetic
+9f8c2fbb-a04e-42f9-8fa0-b7a905dbafa0,"The ventilation openings or slots leading to the ventilation space or gap of a structure equipped with a ventilation space or gap must be positioned so that the ventilation space or gap is fully usable as a ventilation air flow path and that the ventilation space or gap is free of enclosed, non-ventilated areas.",{'ID': '40_Finnish_Health-Humidity'},"The ventilation openings or <e1>slots</e1> <e2>leading to the ventilation space or gap of a structure equipped with a ventilation space or gap</e2> must be positioned so that the ventilation space or gap is fully usable as a ventilation air flow path and that the ventilation space or gap is free of enclosed, non-ventilated areas.",selection,annotated
+96ad745d-47e4-44d5-91ee-a0482881dd8f,"Consideration should be given to installing a fold-down table, e.g. for baby changing.",{'ID': '168_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Consideration</e1> should be given to <e2>installing a fold-down table</e2>, e.g. for baby changing.",necessity,annotated
+64695439-3458-4d43-8e7b-a2ba75075cea,"There must be safe and easily accessible, uninterrupted access routes to any chimneys, ventilation equipment and other building equipment and structural elements that are located on the roof of the building and that must be accessed regularly.",{'ID': '124_Finnish_SafetyOfUse'},"There must be safe and easily accessible, uninterrupted access routes to any chimneys, ventilation equipment and other <e1>building</e1> <e2>equipment</e2> and structural elements that are located on the roof of the building and that must be accessed regularly.",part-of,annotated
+2f89cb06-3ee9-49b5-ac36-46f31ae3928f,Hot water pipework should be insulated in all areas inside and outside the building unless it can be demonstrated that the heat is always useful.,{'ID': '170_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Hot water pipework</e1> should be <e2>insulated</e2> in all areas inside and outside the building unless it can be demonstrated that the heat is always useful.,necessity,annotated
+4abb3268-3ba6-47e8-a8b7-4676dbaa9a16,"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide all means of escape routes with a minimum clear headroom of 2m, except in doorways.",{'ID': '28_UK_DocK_ProtectionFromFalling'},"For buildings other than dwellings and for common <e1>access areas</e1> in <e2>buildings</e2> that contain flats, Provide all means of escape routes with a minimum clear headroom of 2m, except in doorways.",part-of,annotated
+4e441774-859a-4a85-94ec-5fda3b2a6531,"A copy should be submitted to the building control body as evidence that the system has been correctly installed, inspected and commissioned.",{'ID': '265_UK_DocF_V1_Ventilation'},"A <e1>copy</e1> should be <e2>submitted to the building control body as evidence that the system has been correctly installed, inspected and commissioned</e2>.",necessity,annotated
+db734798-9e42-4fe1-900c-77d4e6131809,"The main doors for entering a dwelling (usually the front door) should have a door viewer unless other means exist to see callers, such as clear glass within the door or a window next to the doorset.",{'ID': '11_UK_DocQ_Security_Dwellings'},"The main doors for entering a dwelling (usually the front door) should have a door viewer unless other <e1>means</e1> <e2>exist to see callers</e2>, such as clear glass within the door or a window next to the doorset.",selection,annotated
+1913381b-a2cc-496e-9168-82ccf2a01d50,"In connection with repair and alteration work, the heat emitters connected to the domestic hot water ring duct may be replaced so that the heat emission capacity of the heat emitters to be installed does not exceed 200 Watts per room.",{'ID': '67_Finnish_Health-WaterAndSewerage'},"In connection with repair and alteration work, the heat emitters connected to the <e1>domestic</e1> <e2>hot water ring duct</e2> may be replaced so that the heat emission capacity of the heat emitters to be installed does not exceed 200 Watts per room.",selection,annotated
+0df5892a-e396-424e-90f1-74f6ccfb9e1a,"A certain proportion of the changing rooms, washing facilities, saunas and swimming pools in a non-residential building shall be suitable for a person with mobility and functional impairment.",{'ID': '61_Finnish_Accessibility'},"A <e1>certain proportion</e1> of the changing rooms, washing facilities, <e2>saunas</e2> and swimming pools in a non-residential building shall be suitable for a person with mobility and functional impairment.",part-of,annotated
+5577528f-8fa0-4ca3-96f6-ea418091cb86,The side edges of stairs and landings must be fitted with a raised camber to prevent slipping over the edge if a cube measuring more than 50 millimetres in width is able to pass through the opening between the plane level and the handrail or wall.,{'ID': '32_Finnish_SafetyOfUse'},The side edges of stairs and landings must be fitted with a raised camber to prevent slipping over the edge if a <e1>cube</e1> measuring more than 50 millimetres in <e2>width</e2> is able to pass through the opening between the plane level and the handrail or wall.,part-of,annotated
+33eb3a5a-584f-4d1e-84a0-35fe66954d80,Consideration should be given to the power requirements of essential (e.g. life safety) systems.,{'ID': '323_UK_DocM_V2_AccessAndUseOfBuildings'},Consideration should be given to the power requirements of <e1>essential</e1> (e.g. <e2>life safety</e2>) systems.,selection,annotated
+64695439-3458-4d43-8e7b-a2ba75075cea,"There must be safe and easily accessible, uninterrupted access routes to any chimneys, ventilation equipment and other building equipment and structural elements that are located on the roof of the building and that must be accessed regularly.",{'ID': '124_Finnish_SafetyOfUse'},"There must be <e1>safe</e1> and easily accessible, uninterrupted access routes to any chimneys, ventilation equipment and other building <e2>equipment</e2> and structural elements that are located on the roof of the building and that must be accessed regularly.",none,annotated
+7d7d55f1-b28d-4ce8-aec6-dd4dc0786ce8_9,,,"For sizes of cylinder not listed, the <e1>dwellings</e1> from the cylinder should not exceed <e2>600kg/m3</e2>, where V is the volume in litres.",less-equal,synthetic
+ed2cca4a-50f7-470d-9752-dd8722385a24,"In dwellings and other premises that are used by children, restrictors must be installed on windows and other openings where there may be a danger of falling, and these must be such that they limit the easy opening of the window to 100 millimetres.",{'ID': '80_Finnish_SafetyOfUse'},"In dwellings and other <e1>premises</e1> that are used by children, restrictors must be installed on windows and other openings where there may be a danger of falling, and <e2>these</e2> must be such that they limit the easy opening of the window to 100 millimetres.",none,annotated
+7af206e3-3c30-4fd8-8d95-bf9b95861206,Systems should be commissioned to optimise the use of energy for pumping.,{'ID': '393_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Systems</e1> should be <e2>commissioned to optimise the use of energy for pumping</e2>.,necessity,annotated
+569c7958-b7d6-4b9c-9dd9-13307e95e59b_7,,,"For ducted systems that are served by fans with a <e1>service</e1> greater than <e2>One</e2>, ductwork leakage tests should be carried out.",greater,synthetic
+2633c957-07b4-4caa-a9d6-5acbac16b0b0_5,,,"NOTE: Linear interpolation should be used to determine efficiencies between manufacturers declared efficiencies at 30 and <e1>2,100 millimetres</e1> <e2>design flow rate</e2>.",equal,synthetic
+009e12eb-db83-485c-9ffc-e1f462251109_3,,,Each air terminal should have a <e1>building services</e1> of at least <e2>1400mm</e2> of the free area of its associated duct.,greater-equal,synthetic
+72d7716f-7e3e-442c-9e42-14d4b19e18e3,A district heat network that is being connected to a new building should not have a CO2 emission factor for delivered heat to the building which is greater than 0.350kgCO2/kWh.,{'ID': '336_UK_DocM_V2_AccessAndUseOfBuildings'},A <e1>district heat network</e1> that is being <e2>connected to a new building</e2> should not have a CO2 emission factor for delivered heat to the building which is greater than 0.350kgCO2/kWh.,selection,annotated
+d988e207-c3f9-4314-9a16-f99b334595f4,The tread must be no less than 270 millimetres.,{'ID': '26_Finnish_SafetyOfUse'},The <e1>tread</e1> must be no less than <e2>270 millimetres</e2>.,greater-equal,annotated
+8364a5f1-f80e-484c-9f38-bffc6f4c1876,"Where communal parking is provided to blocks of flats, at least one standard parking bay is provided close to the communal entrance of each core of the block (or to the lift core where the parking bay is internal).",{'ID': '44_UK_DocM_V1_AccessAndUseOfBuildings'},"Where communal parking is provided to <e1>blocks of flats</e1>, at least one <e2>standard</e2> parking bay is provided close to the communal entrance of each core of the block (or to the lift core where the parking bay is internal).",none,annotated
+2c224c59-366d-447f-9ecc-87c119c2db07,"For new dwellings, the commissioning plan should be given to the building control body with the design stage dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate calculations.",{'ID': '374_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For new <e1>dwellings</e1>, the <e2>commissioning plan</e2> should be given to the building control body with the design stage dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate calculations.",part-of,annotated
+72e7ed0c-9e73-46b2-a919-20f3fea337fd,"An area with a potentially flammable or explosive atmosphere must not be located in a building where there are dwellings, accommodation premises, institutions or assembly and business premises.",{'ID': '56_Finnish_FireSafety'},"An area with a potentially flammable or explosive atmosphere must not be located in a <e1>building</e1> where there are dwellings, accommodation premises, <e2>institutions</e2> or assembly and business premises.",part-of,annotated
+7f3f59a4-fc7e-4b14-8074-384f6cacf548_8,,,"The <e1>level with entry</e1> of a barrier in a dwellings indoor areas may, however, be at least <e2>25mm</e2> if the drop is less than three metres.",greater-equal,synthetic
+b5d2186d-338d-40b6-b3b4-7fadf3cfd4e0,"For district cooling schemes, the CO2 and primary energy content of the cooling energy supplied should be calculated.",{'ID': '286_UK_DocM_V2_AccessAndUseOfBuildings'},"For district cooling schemes, the CO2 and primary energy content of the cooling energy <e1>supplied</e1> should be <e2>calculated</e2>.",none,annotated
+f3c5d35c-ad38-46d6-8a75-1a331555b89e,The index terminal flow rate should be set with the terminal fully open and all other terminals should be adjusted to achieve the required flow rates at each terminal.,{'ID': '206_UK_DocF_V1_Ventilation'},The index terminal flow rate should be set with the terminal fully open and all other <e1>terminals</e1> should be <e2>adjusted to achieve the required flow rates at each terminal</e2>.,necessity,annotated
+493ec553-7761-4d1e-aa98-05d925ddf955_0,,,The <e1>tie force</e1> of a horizontal hatch must be at least <e2>400kg</e2>.,greater-equal,synthetic
+9494f4b9-aae0-4668-aebb-1d8851dd0824,"In refreshment facilities, bars and counters (or sections of them) should be at a level suitable for wheelchair users.",{'ID': '127_UK_DocM_V2_AccessAndUseOfBuildings'},"In <e1>refreshment facilities</e1>, <e2>bars and counters</e2> (or sections of them) should be at a level suitable for wheelchair users.",part-of,annotated
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9,"In buildings more than 9 metres and at most 28 metres in height, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",{'ID': '126_Finnish_SafetyOfUse'},"In buildings more than 9 metres and at most 28 metres in <e1>height</e1>, the attic and roof must be accessible via the interior and exterior of the building; in <e2>buildings</e2> more than 28 metres in height, these must be accessible via the interior.",none,annotated
+5e7d4831-4ec8-48f9-9e60-0422fcc1eae4,"When replacing an existing system, the installed generation capacity of the new system should be no less than that of the existing system, except where a smaller system can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",{'ID': '344_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When replacing an existing system, the installed generation capacity of the <e1>new</e1> <e2>system</e2> should be no less than that of the existing system, except where a smaller system can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",selection,annotated
+11f2902d-29c2-474e-97d0-628a2a97a666_7,,,"<e1>glare and reflections</e1> of over <e2>01:08:00</e2> must be equipped with an appropriate safety barrier, railing or handrail.",greater,synthetic
+d504fd87-d13d-4936-9d7a-71d17954760d_7,,,"The <e1>sizes</e1> of the steps in an exit may be no more than <e2>1,500 millimetres</e2>.",less-equal,synthetic
+0fdce0b1-7992-401f-aa84-ad7f2acca23d,Cavity walls: the inner block leaf mortar joint should be fully filled and pointed within the cavity.,{'ID': '184_UK_DocL_V1_ConsrvationOfFuelAndPower'},Cavity walls: the <e1>inner</e1> <e2>block leaf</e2> mortar joint should be fully filled and pointed within the cavity.,selection,annotated
+6075de3c-d339-4ba4-9945-990480975615,"Where a kitchen and living room accommodation are not separate rooms (i.e. open plan), no fewer than three ventilators of the same equivalent area as for other habitable rooms should be provided within the open-plan space.",{'ID': '94_UK_DocF_V1_Ventilation'},"Where a kitchen and living room accommodation are not separate rooms (i.e. open plan), no fewer than three <e1>ventilators</e1> <e2>of the same equivalent area as for other habitable rooms</e2> should be provided within the open-plan space.",selection,annotated
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_1,,,Skirtings totalling up to 50mm total thickness and shallow projecting <e1>assembly areas</e1> or casings above <e2>20 millimetres</e2> may be discounted when measuring clear width.,greater,synthetic
+45338082-ca66-418b-8fe1-8f2be926f330_3,,,A <e1>roof-lights</e1> of no more than <e2>A</e2> may pass between the stair steps.,less-equal,synthetic
+656aa2fa-18cb-41ee-ae28-28deb3dffcc3,The water temperature of the water in the hot water system shall be at least 55 degrees Celsius and available from the hot water plumbing fixture within 20 seconds.,{'ID': '61_Finnish_Health-WaterAndSewerage'},The water temperature of the <e1>water</e1> in the <e2>hot water system</e2> shall be at least 55 degrees Celsius and available from the hot water plumbing fixture within 20 seconds.,part-of,annotated
+103f99ad-884b-4bae-9f22-ccb1c5bc3d26,"In an open garage of no more than five storeys, the maximum area may be used as the surface area of the storeys, even though the driveways between the various storeys are combined.",{'ID': '110_Finnish_FireSafety'},"In an open <e1>garage</e1> of no more than five storeys, the maximum <e2>area</e2> may be used as the surface area of the storeys, even though the driveways between the various storeys are combined.",part-of,annotated
+aa7c5790-2189-451d-bd0e-956a257a7b6d,"In an existing system, when a boiler or hot water storage vessel is replaced, any accessible pipes in the dwelling should be insulated.",{'ID': '201_UK_DocL_V1_ConsrvationOfFuelAndPower'},"In an existing system, when a boiler or hot water storage vessel is replaced, any accessible <e1>pipes</e1> in the dwelling should be <e2>insulated</e2>.",necessity,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479,Individual flights are: for gradients up to 1:15 not more than 10m long; for gradients up to 1:12 not more than 5m long.,{'ID': '18_UK_DocM_V1_AccessAndUseOfBuildings'},Individual flights are: for gradients up to 1:15 not more than <e1>10m</e1> <e2>long</e2>; for gradients up to 1:12 not more than 5m long.,less-equal,annotated
+a5e9c36f-358f-4375-943c-6d5b89c82647,"Any abrupt level differences of over 0.7 metres and any precipices located in the vicinity of common play and recreation areas associated with buildings with more than two dwellings must be indicated by appropriate barriers or suitable planted areas, or outfitted with a base that cushions any fall.",{'ID': '92_Finnish_SafetyOfUse'},"Any abrupt <e1>level differences</e1> of over 0.7 metres and any precipices located in the <e2>vicinity</e2> of common play and recreation areas associated with buildings with more than two dwellings must be indicated by appropriate barriers or suitable planted areas, or outfitted with a base that cushions any fall.",part-of,annotated
+203faa23-7b71-47c9-a6e5-2333ac45389e_1,,,"The <e1>primary energy factor</e1> of the indoor steps of dwelling units and living quarters may be no more than <e2>0.3</e2>, and the tread must be no less than 250 millimetres.",less-equal,synthetic
+19c404de-7fd5-4e44-8a8f-b4219883f0ce,That background ventilators allow fresh air into the building and should be left open.,{'ID': '102_UK_DocF_V2_Ventilation'},That <e1>background ventilators</e1> <e2>allow fresh air into the building</e2> and should be left open.,necessity,annotated
+d3fc8c9b-c23a-4188-8723-369caa90453c,"The reference value for a building's total combined window area is 15 of the sum total of the floor  plate areas  of  the  buildings  storeys that  are  fully  or in  part  above  the  ground  but, however, at most 50 of the building's facade area.",{'ID': '124_Finnish_EnergyEfficiency'},"The <e1>reference value</e1> for a building's total combined window area is 15 of the sum total of the floor plate areas of the <e2>buildings</e2> storeys that are fully or in part above the ground but, however, at most 50 of the building's facade area.",none,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_4,,,"If the air flows of extract air categories 1 and 2 are combined into the same duct and <e1>energy  consumption</e1> <e2>8.5m2</e2> air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+4094b859-b3b4-4035-94cd-8cf47ccbd801_3,,,"The <e1>air flow resistance</e1> is at least <e2>1,500 millimetres</e2>.",greater-equal,synthetic
+1de9d3e5-dee3-42c9-b929-80b7936f1642,The lift shall provide access to the entrance level and each level with entry to a dwelling or a space serving the use of the building.,{'ID': '33_Finnish_Accessibility'},The <e1>lift</e1> shall provide access to the entrance level and each <e2>level with entry</e2> to a dwelling or a space serving the use of the building.,none,annotated
+a5e9c36f-358f-4375-943c-6d5b89c82647,"Any abrupt level differences of over 0.7 metres and any precipices located in the vicinity of common play and recreation areas associated with buildings with more than two dwellings must be indicated by appropriate barriers or suitable planted areas, or outfitted with a base that cushions any fall.",{'ID': '92_Finnish_SafetyOfUse'},"Any abrupt level differences of over 0.7 metres and any precipices located in the vicinity of <e1>common play</e1> and recreation <e2>areas</e2> associated with buildings with more than two dwellings must be indicated by appropriate barriers or suitable planted areas, or outfitted with a base that cushions any fall.",selection,annotated
+793cb939-b3d9-46eb-ae65-71a4d5c8031b_5,,,Where the <e1>sewers</e1> is within the private curtilage of the dwelling (but not within a carport or <e2>evacuation areas</e2>) at least one space is a standard parking bay that can be widened to 3.3m.,not-part-of,synthetic
+85745724-aa09-4cdd-ad17-3c50ea2b99a1,"Where sanitary facilities are wheelchair accessible, basins and sinks should be wall hung (typically with their rim 770-850mm above finished floor level) and the clear zone beneath basins, services and pedestals is maximised to enable wheelchair users to approach.",{'ID': '105_UK_DocM_V1_AccessAndUseOfBuildings'},"Where sanitary facilities are wheelchair accessible, basins and sinks should be wall hung (typically with their rim 770-850mm above finished floor level) and the <e1>clear zone</e1> beneath basins, services and pedestals is <e2>maximised to enable wheelchair users to approach</e2>.",necessity,annotated
+88e23b46-22d9-4be6-87b7-40541f7995a9_1,,,"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the <e1>total capital cost</e1> exceeds <e2>25 decibels</e2>; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",greater,synthetic
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_1,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for <e1>thermal integrity</e1> 1 and <e2>0.5 kN/m2</e2> if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",equal,synthetic
+5b4380ba-0066-4735-a362-316d4c8e70b2_9,,,"Where a building undergoing major renovation, which is not a residential building or a mixeduse building, will have more than <e1>0.2</e1> <e2>timber frame</e2> after the major renovation is completed (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.",greater,synthetic
+2fad9e0f-fa0d-4a6b-9c63-152ef8828c4d_3,,,An upstand built on site should not exceed a <e1>total extract air flow</e1> of <e2>25 decibels</e2>.,less-equal,synthetic
+a0c838b5-5fe2-4b52-abe1-432804c2c8aa_10,,,A <e1>illuminance</e1> of 21 C shall be used as the <e2>Signs</e2> for room temperature during the heating season.,equal,synthetic
+7f49ccb1-ce2c-47eb-8b22-2c8e806e5d88_6,,,The resilient layer should be to the full height of the door and <e1>0.15m/s</e1> <e2>input charge</e2> of the doorset.,equal,synthetic
+bde1697a-20c9-4f15-a63c-5be323a058c1,Any connection of two or more air handling units to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,{'ID': '90_Finnish_Health-IndoorClimateAndVentilation'},Any connection of <e1>two</e1> or more <e2>air handling units</e2> to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,greater-equal,annotated
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_7,,,"The wall ties should have a <e1>temperature</e1> of <e2>4</e2> and a vertical spacing of 450mm, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",equal,synthetic
+d3fc8c9b-c23a-4188-8723-369caa90453c_5,,,"The <e1>total extract air flow</e1> for a building's total combined window area is <e2>50 millimetres</e2> of the sum total of the floor plate areas of the buildings storeys that are fully or in part above the ground but, however, at most 50 of the building's facade area.",equal,synthetic
+4abb3268-3ba6-47e8-a8b7-4676dbaa9a16_6,,,"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide all means of escape routes with a minimum clear <e1>vicinity</e1> of <e2>2</e2>, except in doorways.",equal,synthetic
+8151be81-09ad-4dac-b2d2-f0d757915b6c_5,,,"However, when the snow load can occur, the <e1>breaking</e1> of the load s should be at least <e2>0.15m/s</e2>.",greater-equal,synthetic
+46f5be2a-1514-420b-bc39-331fc6e0d2df_2,,,"The dwelling primary energy rate, dwelling emission rate and <e1>travel</e1>, all calculated using the measured air permeability, must not be higher than the target primary energy rate, target emission rate and <e2>size</e2>, respectively.",less-equal,synthetic
+76acc6bd-50c0-4f3f-b015-42e171ec6ce7_2,,,<e1>400mm</e1> <e2>thermometers</e2> must be installed.,equal,synthetic
+b4582e8e-9bf5-4d2e-8eb3-975e45511aa2,"The building should be designed, within the overall constraints of space, so that the difference in level between the entrance storey and the site entry point is minimised.",{'ID': '37_UK_DocM_V2_AccessAndUseOfBuildings'},"The building should be <e1>designed, within the overall constraints of space</e1>, so that the <e2>difference in level between the entrance storey and the site entry point is minimised</e2>.",selection,annotated
+87c9cfa3-8093-497d-be10-dc054abe7062,"For common leaf lintels, the base plate should not be continuous and the lintel core should be insulated.",{'ID': '164_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For common leaf lintels, the base plate should not be continuous and the <e1>lintel core</e1> should be <e2>insulated</e2>.",necessity,annotated
+f0c72b35-5a0a-4554-8713-96f6f73a67f1,A cube with edges of no more than 50 millimetres may pass between the lower edge of a barriers protective part and the landing or the upper surface or edge of a step.,{'ID': '51_Finnish_SafetyOfUse'},A <e1>cube</e1> with <e2>edges</e2> of no more than 50 millimetres may pass between the lower edge of a barriers protective part and the landing or the upper surface or edge of a step.,part-of,annotated
+8207751f-13b8-4fe3-9bfe-4423093d4905,A  building  with  dwellings  or  accommodation  or  patient  rooms  shall  be  designed  and implemented so that the reverberation time of the staircase and exit route is no more than 1.3 seconds.,{'ID': '26_Finnish_AcousticEnvironment'},A building with dwellings or <e1>accommodation</e1> or patient rooms shall be designed and implemented so that the reverberation time of the staircase and <e2>exit route</e2> is no more than 1.3 seconds.,none,annotated
+2de867fe-80e7-4617-ad18-36225dd45ab1,Hinged or pivot windows with an opening angle of less than 15 degrees are not suitable for purge ventilation.,{'ID': '53_UK_DocF_V1_Ventilation'},Hinged or pivot windows with an <e1>opening angle</e1> of less than <e2>15 degrees</e2> are not suitable for purge ventilation.,less,annotated
+46ee0eda-086a-40ab-8e8f-bfa4c85abd49,"If the indoor access route leading to an evacuation area in a non-residential building is via the indoor stairs in the area, these stairs must be wide enough that they can be used to transport an immobile individual on a stretcher.",{'ID': '16_Finnish_SafetyOfUse'},"If the <e1>indoor</e1> access route leading to an evacuation area in a non-residential building is via the <e2>indoor</e2> stairs in the area, these stairs must be wide enough that they can be used to transport an immobile individual on a stretcher.",none,annotated
+b4cef2a7-038c-4f72-8ea6-20e43d766165,"The building primary energy rate and building emission rate submission should be accompanied by a report, signed by a suitably qualified person, detailing how the CO2 emission factors and primary energy factors have been derived.",{'ID': '70_UK_DocM_V2_AccessAndUseOfBuildings'},"The building primary energy rate and building emission rate submission should be accompanied by a <e1>report</e1>, signed by a suitably qualified person, <e2>detailing how the CO2 emission factors and primary energy factors have been derived</e2>.",selection,annotated
+302c413e-fefd-47f1-914f-0dc787e4a761,"Where illuminance on surfaces is greater than 200 lux, a difference in light reflectance value should be a minimum of 20 points.",{'ID': '29_UK_DocM_V2_AccessAndUseOfBuildings'},"Where <e1>illuminance</e1> on surfaces is greater than 200 lux, a difference in light reflectance value should be a minimum of <e2>20 points</e2>.",none,annotated
+a8b3e54e-902c-4502-99a2-8c41d46f1416_3,,,"If there are more than <e1>EI 30</e1> <e2>dwellings</e2> in a space, they must be linked to one another in at least four groups, unless the chairs are placed around tables.",greater,synthetic
+3d0bbf85-327f-4f92-a468-201f81080779,The roof insulation should be installed when the eaves are still accessible.,{'ID': '169_UK_DocL_V1_ConsrvationOfFuelAndPower'},The roof <e1>insulation</e1> should be <e2>installed when the eaves are still accessible</e2>.,necessity,annotated
+0262f6e5-21bc-4312-9388-8ac93b79416d_2,,,The minimum full <e1>output</e1> of the absorption chillers should be no worse than <e2>100 millimetres</e2>.,greater-equal,synthetic
+5869233a-4fc0-48bf-9007-2b0c9a169fef,"A building shall, if its size, number of storeys or an intended purpose of a premises within the building so requires, be divided into fire compartments in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",{'ID': '100_Finnish_FireSafety'},"A building shall, if its size, number of storeys or an intended purpose of a premises within the building so <e1>requires</e1>, be <e2>divided into fire compartments</e2> in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",none,annotated
+40b40b1b-d1b1-49d8-b9b7-13c5845a169d_11,,,The structure of the control appliance of the plumbing fixture shall be such that its <e1>load capacity</e1> does not arise above <e2>200 Watts per room</e2>.,less-equal,synthetic
+5b1fe636-d2aa-4382-885e-a4f8a2cae4d4_9,,,"Generally, a thermal element once upgraded should not have a <e1>calculations</e1> greater than <e2>0.8 metres</e2>.",less-equal,synthetic
+7d7d55f1-b28d-4ce8-aec6-dd4dc0786ce8_4,,,"For sizes of cylinder not listed, the <e1>water heater</e1> from the cylinder should not exceed <e2>28 metres</e2>, where V is the volume in litres.",less-equal,synthetic
+079db365-cfed-474e-9329-25349ac0db4a,"In connection with the door of an outside space of an individual dwelling the level difference outside the door may be more than 20 millimetres if the level difference can, with reasonable effort, be eliminated with equipment in the outdoor space.",{'ID': '21_Finnish_Accessibility'},"In connection with the door of an outside space of an individual dwelling the level difference <e1>outside the door</e1> may be more than 20 millimetres if the level difference can, with reasonable effort, be <e2>eliminated with equipment in the outdoor space</e2>.",none,annotated
+457ecdc0-8247-4ad4-9beb-3b7a31cfa0fd,"All public areas, including lavatory accommodation, public telephones and external terraces should be accessible.",{'ID': '138_UK_DocM_V2_AccessAndUseOfBuildings'},"All <e1>public areas</e1>, including lavatory accommodation, public telephones and external <e2>terraces</e2> should be accessible.",selection,annotated
+5b4380ba-0066-4735-a362-316d4c8e70b2_7,,,"Where a building undergoing major renovation, which is not a residential building or a mixeduse building, will have more than <e1>20C</e1> <e2>facility</e2> after the major renovation is completed (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.",greater,synthetic
+835d8fad-7a27-4299-aa38-a5b1771a6779,"In large building complexes, such as retail parks and large sports centres, there should be one wheelchair-accessible unisex toilet capable of including an adult changing table.",{'ID': '178_UK_DocM_V2_AccessAndUseOfBuildings'},"In large <e1>building complexes</e1>, such as retail parks and large sports centres, there should be one wheelchair-accessible <e2>unisex</e2> toilet capable of including an adult changing table.",none,annotated
+76acc6bd-50c0-4f3f-b015-42e171ec6ce7_0,,,<e1>15</e1> <e2>balcony</e2> must be installed.,equal,synthetic
+88e23b46-22d9-4be6-87b7-40541f7995a9_4,,,"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the <e1>air leakage rate figure</e1> exceeds <e2>60</e2>; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",greater,synthetic
+bd033057-ac6c-45bb-92c7-ca58bf22dab1,The lobby should be large enough and of a shape to allow a wheelchair user or a person pushing a pram to move clear of one door before opening the second door.,{'ID': '80_UK_DocM_V2_AccessAndUseOfBuildings'},The <e1>lobby</e1> should be <e2>large enough</e2> and of a shape to allow a wheelchair user or a person pushing a pram to move clear of one door before opening the second door.,necessity,annotated
+3f7c10d1-d801-4351-bc85-187cf8cffeb3,The water vapour resistance and air tightness of external walls and their various layers as well as the structures attached to the external wall and joints to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,{'ID': '96_Finnish_Health-Humidity'},The water vapour resistance and <e1>air tightness</e1> of external walls and their various layers as well as the structures attached to the external wall and joints to the <e2>external</e2> wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,none,annotated
+9fd15b82-fc32-4364-8724-f1ef14f0c047_5,,,The cooker hood should <e1>surface area</e1> at least the <e2>intended time of use</e2> of the cooker.,greater-equal,synthetic
+72d7716f-7e3e-442c-9e42-14d4b19e18e3_2,,,A <e1>pipes</e1> that is being connected to a new building should not have a <e2>air distribution</e2> for delivered heat to the building which is greater than 0.350kgCO2/kWh.,not-part-of,synthetic
+8b054fa5-fa6b-40f8-996a-a6dfea855fc3,"The distance between a door that opens onto a landing and the upper edge of the ramp or flight of stairs must be no less than 400 millimetres on the side wall and no less than 1,500 millimetres on the end wall.",{'ID': '33_Finnish_SafetyOfUse'},"The distance between a door that opens onto a landing and the upper edge of the ramp or flight of stairs must be no less than 400 millimetres on the side wall and no less than <e1>1,500 millimetres</e1> <e2>on the end wall</e2>.",selection,annotated
+38cd3221-7fc9-4462-be20-78b16a4309d3,The area of openings in the newly created dwelling should not be more than 25 of the total floor area.,{'ID': '490_UK_DocL_V1_ConsrvationOfFuelAndPower'},The area of openings in the newly created dwelling should not be more than <e1>25</e1> of the <e2>total floor area</e2>.,part-of,annotated
+05fdde92-d8af-42ad-963b-9019c69a8ab3_9,,,"For a timber frame where the intermediate floor structure breaches the external wall insulation, further insulation of the same <e1>fittings</e1> as the <e2>gigabit-ready physical infrastructure</e2> used in the external wall should be included within the depth of the intermediate floor structure.",equal,synthetic
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",{'ID': '75_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major <e1>renovation</e1> (a) such a building is <e2>exempt from the requirement to install the electric vehicle charge point</e2>; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",none,annotated
+9fd15b82-fc32-4364-8724-f1ef14f0c047_7,,,The cooker hood should <e1>location</e1> at least the <e2>surfaces</e2> of the cooker.,greater-equal,synthetic
+5ba5ffe7-ece8-488a-b461-da66237e7888,"All walls, ducts and boxings to the WC/cloakroom, bathroom and shower room should be strong enough to support grab rails, seats and other adaptations that could impose a load of up to 1.5kN/m2.",{'ID': '54_UK_DocM_V1_AccessAndUseOfBuildings'},"All walls, <e1>ducts</e1> and boxings to the WC/cloakroom, <e2>bathroom</e2> and shower room should be strong enough to support grab rails, seats and other adaptations that could impose a load of up to 1.5kN/m2.",part-of,annotated
+82aa0792-8ea3-414a-9952-933b4959b782,"NOTE: All boilers should be used in the calculation, including any that are identical.",{'ID': '249_UK_DocM_V2_AccessAndUseOfBuildings'},"NOTE: <e1>All</e1> <e2>boilers</e2> should be used in the calculation, including any that are identical.",none,annotated
+c72a5952-2e0b-4d4a-9185-09e4149b6239,The flooring functioning as waterproofing or waterproofing located underneath the flooring in wet rooms must have a watertight connection with the waterproofing of the wall.,{'ID': '114_Finnish_Health-Humidity'},The flooring functioning as waterproofing or waterproofing located underneath the flooring in wet rooms must have a <e1>watertight connection</e1> with the <e2>waterproofing</e2> of the wall.,part-of,annotated
+0cafda73-ee3a-4a99-a224-2d142de63618,"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",{'ID': '238_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all <e1>parts</e1> of the system including pipework and emitters should be sized to <e2>allow the space heating system to operate effectively</e2> and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",none,annotated
+9dd2a0f1-0ff9-4416-8abd-1e6589980ff4,"If the cross-sectional area of a mechanical ventilation systems air duct is designed to be greater than 0.06 m2, the outdoor air and exhaust air ducts shall be fitted with shutoff dampers that close automatically when the system shuts down.",{'ID': '100_Finnish_Health-IndoorClimateAndVentilation'},"If the cross-sectional area of a mechanical <e1>ventilation systems</e1> <e2>air duct</e2> is designed to be greater than 0.06 m2, the outdoor air and exhaust air ducts shall be fitted with shutoff dampers that close automatically when the system shuts down.",part-of,annotated
+2ca092ec-4425-4552-a389-fd0dadfbd154_10,,,NOTE: A floor level with a <e1>differences</e1> of <e2>180 millimetres</e2> or steeper should be designed as a ramp.,greater-equal,synthetic
+9dd2a0f1-0ff9-4416-8abd-1e6589980ff4,"If the cross-sectional area of a mechanical ventilation systems air duct is designed to be greater than 0.06 m2, the outdoor air and exhaust air ducts shall be fitted with shutoff dampers that close automatically when the system shuts down.",{'ID': '100_Finnish_Health-IndoorClimateAndVentilation'},"If the <e1>cross-sectional area</e1> of a mechanical ventilation systems air duct is designed to be greater than <e2>0.06 m2</e2>, the outdoor air and exhaust air ducts shall be fitted with shutoff dampers that close automatically when the system shuts down.",greater,annotated
+46f5be2a-1514-420b-bc39-331fc6e0d2df_9,,,"The <e1>flushing</e1>, dwelling emission rate and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the <e2>distance of the basement storey floor from the entry level</e2>, target emission rate and target fabric energy efficiency rate, respectively.",less-equal,synthetic
+c9983da5-23f1-4211-88ce-68e4753e4ab9,"A target primary energy rate, target emission rate, building primary energy rate and the building emission rate should be calculated for non-exempt buildings with low energy demand.",{'ID': '102_UK_DocM_V2_AccessAndUseOfBuildings'},"A <e1>target primary energy rate</e1>, target emission rate, building primary energy rate and the building emission rate should be <e2>calculated for non-exempt buildings with low energy demand</e2>.",necessity,annotated
+8b9e1d32-efa8-409b-873b-22e2eae5b537,External walls and their various layers must form a whole that prevents water from harmfully penetrating into the structures.,{'ID': '95_Finnish_Health-Humidity'},External walls and their various <e1>layers</e1> must <e2>form a whole that prevents water from harmfully penetrating into the structures</e2>.,necessity,annotated
+2238d6ef-421b-4f84-b24d-d46c6ba2afc5,"For example, when a door is open, people with impaired sight should be able to identify the door opening within the wall, as well as the leading edge of the door.",{'ID': '92_UK_DocM_V2_AccessAndUseOfBuildings'},"For example, when a door <e1>is open</e1>, people <e2>with impaired sight</e2> should be able to identify the door opening within the wall, as well as the leading edge of the door.",none,annotated
+1afa330a-2d10-44bd-bdce-b9f2667a1b21,"Where it can be held open, steps should be taken to avoid people being harmed by walking into the door.",{'ID': '78_UK_DocM_V2_AccessAndUseOfBuildings'},"Where <e1>it</e1> can be <e2>held open</e2>, steps should be taken to avoid people being harmed by walking into the door.",selection,annotated
+46f5be2a-1514-420b-bc39-331fc6e0d2df,"The dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the target primary energy rate, target emission rate and target fabric energy efficiency rate, respectively.",{'ID': '356_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The dwelling primary energy rate, dwelling emission rate and <e1>dwelling fabric energy efficiency rate</e1>, all <e2>calculated using the measured air permeability</e2>, must not be higher than the target primary energy rate, target emission rate and target fabric energy efficiency rate, respectively.",selection,annotated
+ebc429f0-cb90-41ab-9a11-401a2ddc7bad,"For continuous mechanical ventilation systems, such as continuous mechanical extract ventilation or mechanical ventilation with heat recovery, the system should be balanced to achieve design air flow rates at each room terminal.",{'ID': '268_UK_DocF_V1_Ventilation'},"For continuous mechanical ventilation systems, such as <e1>continuous</e1> mechanical <e2>extract ventilation</e2> or mechanical ventilation with heat recovery, the system should be balanced to achieve design air flow rates at each room terminal.",selection,annotated
+c5a6cac6-a314-47b1-aabd-13f2d1b7ad56,A step-free approach route should be provided to all private entrances.,{'ID': '71_UK_DocM_V1_AccessAndUseOfBuildings'},A <e1>step-free</e1> <e2>approach route</e2> should be provided to all private entrances.,selection,annotated
+86350df0-a40e-412b-a301-004524d56736,"For wet heating systems in new dwellings with a floor area of 150m2 or greater, a minimum of two independently controlled heating circuits should be provided.",{'ID': '246_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For wet heating systems in new <e1>dwellings</e1> with a <e2>floor area</e2> of 150m2 or greater, a minimum of two independently controlled heating circuits should be provided.",part-of,annotated
+ef561e39-db90-462c-8dde-15fbeae954e5,A cube with edges of no more than 200 millimetres may pass between the upper edge of the barrier and the protective part.,{'ID': '50_Finnish_SafetyOfUse'},A cube with <e1>edges</e1> of no more than <e2>200 millimetres</e2> may pass between the upper edge of the barrier and the protective part.,less-equal,annotated
+f6add908-4d45-4b3e-83a6-369f6c36c037_11,,,"Door rails, stiles and muntins should be at least <e1>14 metres</e1> <e2>sections</e2>.",greater-equal,synthetic
+26980508-105c-49db-8595-bf001a48d757_6,,,"In <e1>strategy</e1> with no fixed <e2>terrace of houses</e2> or furnishings, the number of persons shall be calculated to be two persons per square metre.",not-part-of,synthetic
+3724fd47-22f7-432c-81a2-1abcb95c7df2_10,,,"The total number of ventilators installed in a dwellings habitable rooms and kitchens should be no fewer than five, except in <e1>20</e1> <e2>panel parts</e2> properties, where there should be no fewer than four.",equal,synthetic
+a372d2c4-f734-479d-bc8d-d3a8aa15362d,"A wide range of people, including accompanied wheelchair users, should be able to access and use the lift.",{'ID': '49_UK_DocM_V1_AccessAndUseOfBuildings'},"A wide range of <e1>people</e1>, including <e2>accompanied wheelchair users</e2>, should be able to access and use the lift.",selection,annotated
+108b5709-f035-4697-ba25-56edd2ce60fc,"Where permanent or removable seating is provided as part of the design, allowance should be made for disabled people to have a choice of seating location at spectator events.",{'ID': '126_UK_DocM_V2_AccessAndUseOfBuildings'},"Where permanent or <e1>removable</e1> <e2>seating</e2> is provided as part of the design, allowance should be made for disabled people to have a choice of seating location at spectator events.",selection,annotated
+d0f0d416-a728-4d23-965e-10ff6559f2d8,All users including wheelchair users should be able to reach and use the controls that summon and direct the lifting platform.,{'ID': '113_UK_DocM_V2_AccessAndUseOfBuildings'},All <e1>users</e1> including wheelchair users should be <e2>able to reach and use the controls that summon and direct the lifting platform</e2>.,necessity,annotated
+26980508-105c-49db-8595-bf001a48d757_1,,,"In <e1>connector pipe</e1> with no fixed <e2>space heating system</e2> or furnishings, the number of persons shall be calculated to be two persons per square metre.",not-part-of,synthetic
+9ff8b8fd-5361-4c3d-9a7e-7459276c8df7_2,,,The <e1>total number of ventilators</e1> must not exceed the individual dwellings <e2>alongside the leading edge</e2>.,less-equal,synthetic
+cea6e7bd-c494-4146-9f81-3fd2ed64a2a6_4,,,"The <e1>Length</e1> of the floor surface in the seating area and access route may not exceed <e2>1,200 millimetres</e2>.",less-equal,synthetic
+e320322e-3aee-4167-ad19-a6c6cc41f597,The water system shall incorporate: 1) a pressure gauge; 2) thermometers in the water pipe of mixed domestic hot water from the water heater and in the domestic hot water ring duct to measure the temperature of return water; 3) throttling valves.,{'ID': '97_Finnish_Health-WaterAndSewerage'},The water system shall incorporate: 1) a pressure gauge; 2) thermometers in the water pipe of mixed domestic hot water from the water heater and in the <e1>domestic hot water</e1> ring duct to <e2>measure the temperature of return water</e2>; 3) throttling valves.,none,annotated
+cccbc1ea-27be-4d7b-b53c-3cb467a51020,"For heating and cooling systems in a new non-domestic building, or when a heat generator such as a boiler is replaced in an existing non-domestic building, each room should be provided with thermostatic room controls.",{'ID': '220_UK_DocM_V2_AccessAndUseOfBuildings'},"For heating and cooling systems in a new non-domestic building, or when a heat generator such as a <e1>boiler</e1> is replaced in an existing non-domestic building, each <e2>room</e2> should be provided with thermostatic room controls.",none,annotated
+f0c72b35-5a0a-4554-8713-96f6f73a67f1_10,,,A cube with <e1>wide</e1> of no more than <e2>23C</e2> may pass between the lower edge of a barriers protective part and the landing or the upper surface or edge of a step.,less-equal,synthetic
+56b0e4bf-81d7-4ab9-855b-780ef2f0b1d3_2,,,Storage premises with a <e1>performance standards</e1> exceeding <e2>01:20:00</e2> are not permitted within the building.,greater,synthetic
+aef92227-4c01-4c59-b96d-ce414540606b,"Appliances capable of burning both biomass fuel and fossil fuel the CO2 emission factor and primary energy factor for dua-lfuel appliances should be used, except where the building is in a smoke control area, when the anthracite figure should be used.",{'ID': '63_UK_DocM_V2_AccessAndUseOfBuildings'},"Appliances capable of burning both biomass fuel and fossil fuel the <e1>CO2 emission factor</e1> and primary energy factor <e2>for dua-lfuel appliances</e2> should be used, except where the building is in a smoke control area, when the anthracite figure should be used.",selection,annotated
+7d35f4c4-fa65-4d68-a974-f54386ca8aee_4,,,"However, a horizontal <e1>hot water ring duct</e1> in a protective part must be no higher than <e2>(16.66 8.33 V0.4)/(1000 24)</e2>.",less-equal,synthetic
+9952f64d-e0df-4b03-84af-150782f81387,"For mobility-impaired people, a going of at least 300mm is preferred.",{'ID': '124_UK_DocM_V2_AccessAndUseOfBuildings'},"For mobility-impaired people, a <e1>going</e1> of at least 300mm is <e2>preferred</e2>.",necessity,annotated
+7d552257-2212-4139-8d13-b982e0e7744f,"It would be beneficial if entrance doors to wheelchair-accessible bedrooms were powered opening, as this could avoid the need for the 300mm access space adjacent to the leading edge of the door.",{'ID': '143_UK_DocM_V2_AccessAndUseOfBuildings'},"It would be beneficial if <e1>entrance doors</e1> to wheelchair-accessible <e2>bedrooms</e2> were powered opening, as this could avoid the need for the 300mm access space adjacent to the leading edge of the door.",part-of,annotated
+3121fe90-27db-405e-a42a-df3cd22ee176_3,,,"Where necessary, <e1>1,200 MJ/m2</e1><e2>requirement</e2>, one above the other, must be installed in order to take into account children and users of wheelchairs.",equal,synthetic
+9497b383-7217-4366-80c5-6f5677b30893,"If the building is heated through a district heat network or community heating system, the effective rated output should be based on the capacity of the equipment installed in the building, making reasonable assumptions for the operation of the district heat network or community heating system, including flow temperatures.",{'ID': '325_UK_DocM_V2_AccessAndUseOfBuildings'},"If the <e1>building</e1> is <e2>heated through a district heat network or community heating system</e2>, the effective rated output should be based on the capacity of the equipment installed in the building, making reasonable assumptions for the operation of the district heat network or community heating system, including flow temperatures.",selection,annotated
+20518e80-6f7e-457f-8c5a-59fa4c0eb324_11,,,"When calculating the heat loss for a buildings design solution, the <e1>entrance level</e1> shall be used as the value of the <e2>allowance</e2> for the building envelope.",equal,synthetic
+e4fb8d18-8dbc-4351-a2df-d87f880f476a,The fire resistance time requirement for balconies is half that of the load-bearing structures of the storey.,{'ID': '90_Finnish_FireSafety'},The <e1>fire resistance time requirement</e1> for balconies is half that of the load-bearing structures of the <e2>storey</e2>.,none,annotated
+e21fa967-934e-4a29-a66d-252fdbbf928f_10,,,"If the parasitic energy use is unknown, an <e1>design flow rate</e1> of <e2>250 millimetres</e2> should be made for any control system.",equal,synthetic
+f420ae57-5656-4558-b1a3-1079e46bf6cc,"In the case of the storey-level door of a dwelling, or if the number of people evacuating through the door exceeds 60, doors must open in the direction of the exit.",{'ID': '223_Finnish_FireSafety'},"In the case of the storey-level door of a dwelling, or if the <e1>number of people evacuating</e1> through the door exceeds <e2>60</e2>, doors must open in the direction of the exit.",greater,annotated
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab_5,,,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the <e1>air flow resistance</e1> of that installation exceeds <e2>EI 15</e2> of the total cost of the major renovation.",greater,synthetic
+3724fd47-22f7-432c-81a2-1abcb95c7df2_2,,,"The total number of ventilators installed in a dwellings habitable rooms and kitchens should be no fewer than five, except in <e1>400-600mm</e1> <e2>Ramps</e2> properties, where there should be no fewer than four.",equal,synthetic
+d728a9c8-0302-4bd1-b69b-0daeefce30d1,"Where a service building has a reception or sales counter, there should be convenient access to it and part of it should be at a level suitable for a wheelchair user or a seated person.",{'ID': '84_UK_DocM_V2_AccessAndUseOfBuildings'},"Where a service building has a reception or sales counter, there should be convenient access to <e1>it</e1> and <e2>part</e2> of it should be at a level suitable for a wheelchair user or a seated person.",part-of,annotated
+c25a4595-d20d-40ed-bada-495abcfef307,"Background ventilators should be at least 1700mm above floor level, to reduce cold draughts, but still be easy for the occupant to reach.",{'ID': '64_UK_DocF_V1_Ventilation'},"<e1>Background ventilators</e1> should be <e2>at least 1700mm above floor level, to reduce cold draughts</e2>, but still be easy for the occupant to reach.",necessity,annotated
+cf35d4a4-3170-421b-9be1-b68d928eed1d_3,,,"A roof with a <e1>alongside the leading edge</e1> greater than <e2>eight per cent</e2> must be constructed making appropriate use of walkways, roof ladders, safety ladders, roof stairs, roof treads and foot rails.",greater,synthetic
+3153d771-404e-4a54-ac05-ed1b75e37506,"Gangways should not be less than 1100mm wide unless used by not more than 50 persons, in which case gangways should be a minimum of 900mm.",{'ID': '8_UK_DocK_ProtectionFromFalling'},"Gangways should not be less than 1100mm <e1>wide</e1> unless used by not more than 50 persons, in which case gangways should be a minimum of <e2>900mm</e2>.",greater-equal,annotated
+9497b383-7217-4366-80c5-6f5677b30893,"If the building is heated through a district heat network or community heating system, the effective rated output should be based on the capacity of the equipment installed in the building, making reasonable assumptions for the operation of the district heat network or community heating system, including flow temperatures.",{'ID': '325_UK_DocM_V2_AccessAndUseOfBuildings'},"If the building is heated through a district heat network or community heating system, the <e1>effective</e1> <e2>rated output</e2> should be based on the capacity of the equipment installed in the building, making reasonable assumptions for the operation of the district heat network or community heating system, including flow temperatures.",none,annotated
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9,"In buildings more than 9 metres and at most 28 metres in height, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",{'ID': '126_Finnish_SafetyOfUse'},"In buildings more than 9 metres and at most 28 metres in height, the <e1>attic</e1> and roof must be <e2>accessible via the interior and exterior of the building</e2>; in buildings more than 28 metres in height, these must be accessible via the interior.",necessity,annotated
+78d904cd-b605-43a6-b3a4-34c22f557123,"Instead, the dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate should be calculated as if the area covered by the pool were replaced with the equivalent area of floor with the same U-value as the pool surround.",{'ID': '84_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Instead, the dwelling primary energy rate, <e1>dwelling emission rate</e1> and dwelling fabric energy efficiency rate should be <e2>calculated</e2> as if the area covered by the pool were replaced with the equivalent area of floor with the same U-value as the pool surround.",necessity,annotated
+1de9d3e5-dee3-42c9-b929-80b7936f1642,The lift shall provide access to the entrance level and each level with entry to a dwelling or a space serving the use of the building.,{'ID': '33_Finnish_Accessibility'},The lift shall provide access to the entrance level and each <e1>level with entry</e1> to a dwelling or a space <e2>serving the use of the building</e2>.,none,annotated
+5fa7daca-cb50-4397-a736-617e52d30187_9,,,"If efficiencies at below 30% are required and unavailable, the <e1>dimensions</e1> may be taken as equal to that at <e2>1m3/s</e2>.",equal,synthetic
+a86b58e8-046f-44b7-8e1b-00c876c8c647_11,,,"Parapets in <e1>headroom</e1> A to <e2>90</e2> and panel parts of walls acting as parapets, as well as their fasteners, shall be designed to the concentrated load Qk = 0.3 kN acting on a random spot.",less-equal,synthetic
+7e34700e-92de-4b00-a820-f4085a2e186c,"If the free gap between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than 2 metres, the wall in question must be class EI 15.",{'ID': '135_Finnish_FireSafety'},"If the free gap between facing walls of adjacent glazed balconies or the <e1>distance</e1> of the wall to the window of an adjacent fire compartment is less than <e2>2 metres</e2>, the wall in question must be class EI 15.",less,annotated
+6187cad8-0d6d-4154-b98b-7285b36fea8d,Continuously running fans should be set up to operate without occupant intervention but may have manual or automatic controls for selecting the high rate of operation.,{'ID': '65_UK_DocF_V1_Ventilation'},Continuously running <e1>fans</e1> should be set up to operate without occupant intervention but may have <e2>manual</e2> or automatic controls for selecting the high rate of operation.,none,annotated
+a387fcb8-ead2-4094-9be9-72d783468b33,"If the area of windows, roof windows, rooflights and doors exceeds 25 of the total floor area of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",{'ID': '422_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If the area of windows, roof windows, rooflights and doors exceeds <e1>25</e1> of the total floor area of the dwelling, <e2>compensating measures</e2> should be taken to improve the energy efficiency of the dwelling.",none,annotated
+74b9ee2c-0192-442d-b5a1-a2974d456429,"The dwelling is wheelchair adaptable such that key parts of the accommodation, including sanitary facilities and kitchens, could be easily altered to meet the needs of a wheelchair user or, where required by a local planning authority, the dwelling is wheelchair accessible.",{'ID': '67_UK_DocM_V1_AccessAndUseOfBuildings'},"The <e1>dwelling</e1> is wheelchair adaptable such that key parts of the accommodation, including sanitary facilities and kitchens, could be easily altered to meet the needs of a wheelchair user or, <e2>where required by a local planning authority</e2>, the dwelling is wheelchair accessible.",selection,annotated
+4d80c4d1-08ee-481a-9f9c-e9151ce1094d_4,,,"The <e1>building primary energy rate</e1> of windows, roof windows, rooflights and doors should not exceed <e2>2</e2> of the total floor area of the dwelling.",less-equal,synthetic
+636bce88-fd3b-4e5a-9f6a-4aa0d3d1bfa4,"Where a new building contains more than one dwelling, a common access point for a gigabit-capable public electronic communications network is required as a part of the buildings gigabit-ready physical infrastructure.",{'ID': '6_UK_DocR_V1_InfrastructureForElectircalCommunications'},"Where a new building contains more than one dwelling, a <e1>common access point</e1> for a gigabit-capable public electronic communications network is required as a part of the buildings <e2>gigabit-ready physical infrastructure</e2>.",part-of,annotated
+0365837b-a04d-4aaf-a2f5-2e89403a9c2b,"If all the terminals have to be set to a significantly closed position to achieve the required air flow rate, then the fan speed should be reduced and the terminals rebalanced.",{'ID': '200_UK_DocF_V1_Ventilation'},"If all the <e1>terminals</e1> have to be <e2>set to a significantly closed position to achieve the required air flow rate</e2>, then the fan speed should be reduced and the terminals rebalanced.",necessity,annotated
+d8a06af7-3a6b-4d68-8bba-342aac6d3ac0,Water pipes and sewers installed in the ground shall be identifiable and they shall be located separate from one another.,{'ID': '146_Finnish_Health-WaterAndSewerage'},Water pipes and <e1>sewers</e1> <e2>installed in the ground</e2> shall be identifiable and they shall be located separate from one another.,selection,annotated
+3724fd47-22f7-432c-81a2-1abcb95c7df2,"The total number of ventilators installed in a dwellings habitable rooms and kitchens should be no fewer than five, except in one bedroom properties, where there should be no fewer than four.",{'ID': '96_UK_DocF_V1_Ventilation'},"The total number of ventilators installed in a dwellings habitable rooms and kitchens should be no fewer than five, except in <e1>one</e1> bedroom <e2>properties</e2>, where there should be no fewer than four.",none,annotated
+d504fd87-d13d-4936-9d7a-71d17954760d,The riser of the steps in an exit may be no more than 180 millimetres.,{'ID': '25_Finnish_SafetyOfUse'},The <e1>riser</e1> of the steps in an exit may be no more than <e2>180 millimetres</e2>.,less-equal,annotated
+09b2a395-5293-4b7d-82d4-5312482d59e9_1,,,"Door entry controls, where provided, are mounted 900-1000mm above finished ground level, and at least <e1>1,200 millimetres</e1> <e2>structure</e2> from any projecting corner.",greater-equal,synthetic
+29232335-402c-4ed9-af74-fd093ac22e28_9,,,The natural or mechanical ventilation system of a building shall be strong and its air-tightness shall be at least <e1>presence</e1> <e2>50mm</e2>.,greater-equal,synthetic
+13a437c0-918c-47f2-85bd-b80dd69eb027,"There are no limits on the design of display windows and similar glazing, but for new buildings their impact must be taken into account in the calculation of primary energy and CO2 emissions.",{'ID': '138_UK_DocM_V2_AccessAndUseOfBuildings'},"There are no limits on the design of display windows and <e1>similar</e1> glazing, but for new buildings their impact must be taken into account in the <e2>calculation of primary energy and CO2 emissions</e2>.",none,annotated
+d3fc8c9b-c23a-4188-8723-369caa90453c_3,,,"The <e1>air-tightness</e1> for a building's total combined window area is <e2>75 light source lumens per circuit-watt</e2> of the sum total of the floor plate areas of the buildings storeys that are fully or in part above the ground but, however, at most 50 of the building's facade area.",equal,synthetic
+cb522b91-f26f-460e-adee-1a7f59ba10c9,"For heat pump installations in which there are other heat sources available to the same building, each of these heat sources should be appropriately incorporated into a singular control system.",{'ID': '315_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For heat pump installations in which there are other heat sources available to the same building, each of these <e1>heat sources</e1> should be <e2>appropriately incorporated into a singular control system</e2>.",necessity,annotated
+7d35f4c4-fa65-4d68-a974-f54386ca8aee_1,,,"However, a horizontal <e1>seating</e1> in a protective part must be no higher than <e2>E</e2>.",less-equal,synthetic
+f0c72b35-5a0a-4554-8713-96f6f73a67f1_1,,,A cube with <e1>specification</e1> of no more than <e2>2.0 m3/(h m2)</e2> may pass between the lower edge of a barriers protective part and the landing or the upper surface or edge of a step.,less-equal,synthetic
+2afa8bba-b5ad-4e12-bc27-4beea3fd09b2_8,,,The normal relationship between the dimensions of the rise and going is: <e1>200 lux</e1> equals <e2>400 millimetres</e2>.,equal,synthetic
+c8a048c6-8e7e-4b5a-ada5-02990b983401,"A natural ventilation system, a mechanical extract ventilation system or a mechanical supply and extract ventilation system shall not be designed to be combined in such a way that the directions of air flow between the rooms and in the ductworks may change when the air flows are being controlled.",{'ID': '91_Finnish_Health-IndoorClimateAndVentilation'},"A natural ventilation system, a <e1>mechanical</e1> <e2>extract ventilation system</e2> or a mechanical supply and extract ventilation system shall not be designed to be combined in such a way that the directions of air flow between the rooms and in the ductworks may change when the air flows are being controlled.",selection,annotated
+c384013b-c40f-4925-acbe-465e1ca5bc13_0,,,<e1>50 m2</e1> <e2>buildings </e2> per detail should be recorded.,equal,synthetic
+0da52584-1b37-48b5-840f-3795ae695275,the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,{'ID': '119_UK_DocM_V2_AccessAndUseOfBuildings'},the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where <e1>two</e1> <e2>doors</e2> are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,annotated
+2afa8bba-b5ad-4e12-bc27-4beea3fd09b2_9,,,The normal relationship between the dimensions of the rise and going is: <e1>3</e1> equals <e2>20 points</e2>.,equal,synthetic
+6075de3c-d339-4ba4-9945-990480975615,"Where a kitchen and living room accommodation are not separate rooms (i.e. open plan), no fewer than three ventilators of the same equivalent area as for other habitable rooms should be provided within the open-plan space.",{'ID': '94_UK_DocF_V1_Ventilation'},"Where a kitchen and living room accommodation are not separate rooms (i.e. open plan), no fewer than three <e1>ventilators</e1> of the same equivalent area as for other habitable rooms should be provided within the <e2>open-plan space</e2>.",necessity,annotated
+36650de0-ef3c-4fd1-8199-f47c0e576076_1,,,"the <e1>depth</e1> of the platform does not exceed <e2>1,200 millimetres</e2>.",less-equal,synthetic
+e21fa967-934e-4a29-a66d-252fdbbf928f_9,,,"If the parasitic energy use is unknown, an <e1>heat recovery</e1> of <e2>two</e2> should be made for any control system.",equal,synthetic
+b63dcef6-1840-4e9e-ad51-f8fc481fe856,"The wall ties should have a horizontal spacing of 900mm and a vertical spacing of 450mm, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",{'ID': '36_UK_DocA_Structure'},"The <e1>wall ties</e1> should have a horizontal spacing of 900mm and a <e2>vertical spacing</e2> of 450mm, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",necessity,annotated
+2633c957-07b4-4caa-a9d6-5acbac16b0b0_7,,,NOTE: Linear interpolation should be used to determine efficiencies between manufacturers declared efficiencies at 30 and <e1>four</e1> <e2>fire igniting</e2>.,equal,synthetic
+4b510cad-fefb-44be-a9cb-a26e0c42994c,"If the building is connected to a heating system where heat is conveyed via heat pipes external to the building from a shared heat exchanger or heat generation unit to several buildings, the heat loss from those pipes shall be divided between the buildings in proportion to their areas.",{'ID': '101_Finnish_EnergyEfficiency'},"If the building is connected to a heating system where <e1>heat</e1> is <e2>conveyed via heat pipes external to the building from a shared heat exchanger or heat generation unit to several buildings</e2>, the heat loss from those pipes shall be divided between the buildings in proportion to their areas.",selection,annotated
+60205cf2-fa87-4195-9415-a6fb144a9b72,"Entrances and passageways to playgrounds and recreation areas used in the wintertime, as well as street areas surrounding the building and other public areas, must be protected from snow and ice falling from the roof of the building using snow barriers, taking into account the pitch of the roof.",{'ID': '96_Finnish_SafetyOfUse'},"Entrances and passageways to playgrounds and recreation areas used in the wintertime, as well as <e1>street areas</e1> surrounding the building and other public areas, must be <e2>protected from snow and ice falling from the roof of the building using snow barriers, taking into account the pitch of the roof</e2>.",necessity,annotated
+8b054fa5-fa6b-40f8-996a-a6dfea855fc3_0,,,"The <e1>total floor area</e1> between a door that opens onto a landing and the upper edge of the ramp or flight of stairs must be no less than <e2>900mm</e2> on the side wall and no less than 1,500 millimetres on the end wall.",greater-equal,synthetic
+84cd76d7-e5d0-4f39-94bc-0236c65d533a_2,,,"in residential buildings of not more than two storeys, one exit of no less than <e1>55</e1> in <e2>drop</e2> is permitted.",greater-equal,synthetic
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_8,,,"In buildings more than 9 metres and at most <e1>8 per cent (1:12.5)</e1> in <e2>breaking</e2>, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",less-equal,synthetic
+8cef7dc5-2d76-4dd8-80c5-6861b11a8f6f_10,,,"Where the work concerns a building containing more than <e1>35 mg/m3 (30 ppm)</e1> <e2>skylights</e2>, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",greater-equal,synthetic
+bf798097-bb99-42d0-a73f-8cebab8fbeb8_1,,,"In the entrance halls and other indoor areas of administrative, service and business premises and in assembly areas, the <e1>installed generation capacity</e1> of the steps must be no more than <e2>75 light source lumens per circuit-watt</e2> and the tread must be no less than 300 millimetres.",less-equal,synthetic
+a2f3a871-91d5-4777-95c9-4744792b3a69,"in an existing building, for the principal or main staff entrance or entrances to be accessible, an alternative accessible entrance should be provided.",{'ID': '61_UK_DocM_V2_AccessAndUseOfBuildings'},"in an existing building, for the <e1>principal</e1> or <e2>main staff</e2> entrance or entrances to be accessible, an alternative accessible entrance should be provided.",none,annotated
+d342429e-d3fc-46e0-a195-527cfef1fd4b,"When an existing building with a total useful floor area of over 1000m2 is being extended or the habitable area is being increased, consequential improvements should be installed.",{'ID': '451_UK_DocM_V2_AccessAndUseOfBuildings'},"When an existing building with a <e1>total useful</e1> <e2>floor area</e2> of over 1000m2 is being extended or the habitable area is being increased, consequential improvements should be installed.",selection,annotated
+2afa8bba-b5ad-4e12-bc27-4beea3fd09b2_1,,,The normal relationship between the dimensions of the rise and going is: <e1>800 millimetres</e1> equals <e2>16/01/2023 00:00</e2>.,equal,synthetic
+1afa330a-2d10-44bd-bdce-b9f2667a1b21,"Where it can be held open, steps should be taken to avoid people being harmed by walking into the door.",{'ID': '78_UK_DocM_V2_AccessAndUseOfBuildings'},"Where it can be held open, <e1>steps</e1> should be taken to <e2>avoid people being harmed by walking into the door</e2>.",necessity,annotated
+511c1a7f-08b9-48ec-aea6-9b749fdf31a1_8,,,"A non-residential building shall, considering the intended use and functional units of the building and distances in the building, have an <e1>0.136kgCO2/kWh</e1> of appropriately located <e2>heating circuits</e2> which are suitable for users of wheelchairs and walking frames with wheels.",equal,synthetic
+84cd76d7-e5d0-4f39-94bc-0236c65d533a,"in residential buildings of not more than two storeys, one exit of no less than 900 millimetres in width is permitted.",{'ID': '217_Finnish_FireSafety'},"in <e1>residential buildings</e1> of not more than two <e2>storeys</e2>, one exit of no less than 900 millimetres in width is permitted.",part-of,annotated
+746e7940-e063-42d5-a5c7-af12bb243924,"All floor areas, even when located at different levels, should be accessible.",{'ID': '128_UK_DocM_V2_AccessAndUseOfBuildings'},"All <e1>floor areas</e1>, even when <e2>located at different levels</e2>, should be accessible.",selection,annotated
+835d8fad-7a27-4299-aa38-a5b1771a6779,"In large building complexes, such as retail parks and large sports centres, there should be one wheelchair-accessible unisex toilet capable of including an adult changing table.",{'ID': '178_UK_DocM_V2_AccessAndUseOfBuildings'},"In large <e1>building complexes</e1>, such as <e2>retail parks</e2> and large sports centres, there should be one wheelchair-accessible unisex toilet capable of including an adult changing table.",selection,annotated
+9953a539-8775-467a-9028-f51fe6d0f9f6,Grommets or flexible collars should be used around incoming services and sealed to the air barrier with air-sealing tape or sealant.,{'ID': '179_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Grommets</e1> or flexible collars should be <e2>used around incoming services</e2> and sealed to the air barrier with air-sealing tape or sealant.,necessity,annotated
+8e9ef8dc-18bd-4877-98cd-556aa4adee8f,"Reasonable provision shall be made for the conservation of fuel and power in buildings by: (a) limiting heat gains and losses (i) through thermal elements and other parts of the building fabric; and (ii) from pipes, ducts and vessels used for space heating, space cooling and hot water services; (b) providing fixed building services which (i) are energy efficient to a reasonable standard; (ii) have effective controls; and (iii) are commissioned by testing and adjusting as necessary to ensure they use no more fuel and power than is reasonable in the circumstances.",{'ID': '431_UK_DocM_V2_AccessAndUseOfBuildings'},"Reasonable provision shall be made for the conservation of fuel and power in buildings by: (a) limiting heat gains and losses (i) through thermal elements and other parts of the building fabric; and (ii) from pipes, ducts and vessels used for space heating, space cooling and hot water services; (b) <e1>providing fixed building services</e1> which (i) are <e2>energy efficient to a reasonable standard</e2>; (ii) have effective controls; and (iii) are commissioned by testing and adjusting as necessary to ensure they use no more fuel and power than is reasonable in the circumstances.",selection,annotated
+73a6e4e0-c157-4cae-bc28-c0788f6a1e53,"Activation (e.g. motion sensors and push buttons), safety features and the time-lapse allowed for entry and exit through powered door systems should be carefully considered to suit the needs of people who cannot react quickly.",{'ID': '73_UK_DocM_V2_AccessAndUseOfBuildings'},"Activation (e.g. motion sensors and push buttons), <e1>safety features</e1> and the time-lapse allowed for entry and exit through powered <e2>door systems</e2> should be carefully considered to suit the needs of people who cannot react quickly.",none,annotated
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_6,,,"The wall ties should have a horizontal spacing of 900mm and a <e1>travel</e1> of <e2>90mm</e2>, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",equal,synthetic
+35cacecf-06dc-4b0f-aadb-db2ee05518c7,The area of windows and roof windows (but excluding display windows) within the area served exceeds 40 of the facade area.,{'ID': '495_UK_DocM_V2_AccessAndUseOfBuildings'},The area of <e1>windows</e1> and roof windows (but excluding display windows) <e2>within the area served</e2> exceeds 40 of the facade area.,none,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_4,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for <e1>frequency</e1> 1 and <e2>56 metres</e2> if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",equal,synthetic
+fb1da22f-8ddb-4399-b441-64dca68da9af,"If a lift or other device for moving between levels is installed in the exit of an existing building, the dwellings exit may be no less than 850 millimetres wide.",{'ID': '218_Finnish_FireSafety'},"If a lift or other device for moving between levels is installed in the exit of an existing building, the dwellings exit may be no less than <e1>850 millimetres</e1> <e2>wide</e2>.",greater-equal,annotated
+05fdde92-d8af-42ad-963b-9019c69a8ab3_5,,,"For a timber frame where the intermediate floor structure breaches the external wall insulation, further insulation of the same <e1>cost</e1> as the <e2>garage doorset</e2> used in the external wall should be included within the depth of the intermediate floor structure.",equal,synthetic
+4abb3268-3ba6-47e8-a8b7-4676dbaa9a16,"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide all means of escape routes with a minimum clear headroom of 2m, except in doorways.",{'ID': '28_UK_DocK_ProtectionFromFalling'},"For buildings <e1>other than dwellings</e1> and for common access areas in buildings that contain flats, Provide all means of escape routes with a minimum clear headroom of 2m, <e2>except in doorways</e2>.",none,annotated
+56b0e4bf-81d7-4ab9-855b-780ef2f0b1d3_5,,,Storage premises with a <e1>primary energy content</e1> exceeding <e2>B</e2> are not permitted within the building.,greater,synthetic
+7e34700e-92de-4b00-a820-f4085a2e186c_1,,,"If the free gap between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than 2 metres, the wall in question must be <e1>water vapour resistance</e1> <e2>1,500  millimetres</e2>.",equal,synthetic
+83344b26-7cf0-452a-9dac-c0288c46393d,"The non-primary doors for entering a dwelling (for example, back door or garage inter-connecting doors) should be fitted with a multipoint locking system that meets the requirements of: PAS 3621 (key locking on both sides), or PAS 8621 (non-key locking on the internal face), or PAS 10621 (non-key locking on the internal face, but with an external locking override facility).",{'ID': '37_UK_DocQ_Security_Dwellings'},"The non-primary doors for entering a dwelling (for example, back door or garage inter-connecting doors) should be fitted with a <e1>multipoint locking system</e1> that meets the requirements of: PAS 3621 (key locking on both sides), or PAS 8621 (non-key locking on the internal face), or <e2>PAS 10621 (non-key locking on the internal face, but with an external locking override facility)</e2>.",selection,annotated
+aa7c5790-2189-451d-bd0e-956a257a7b6d,"In an existing system, when a boiler or hot water storage vessel is replaced, any accessible pipes in the dwelling should be insulated.",{'ID': '201_UK_DocL_V1_ConsrvationOfFuelAndPower'},"In an <e1>existing system</e1>, when a <e2>boiler</e2> or hot water storage vessel is replaced, any accessible pipes in the dwelling should be insulated.",part-of,annotated
+0f2dbc3b-0f3e-444e-a688-ed8faebd1226,Seats must be fixed to a base if the floor of the seating area is sloped or if there are level differences between the floors of the respective rows of seats.,{'ID': '105_Finnish_SafetyOfUse'},Seats must be fixed to a base if the <e1>floor</e1> of the seating area is <e2>sloped</e2> or if there are level differences between the floors of the respective rows of seats.,selection,annotated
+83ff563b-077a-4849-b526-382fbb012647,The breaking of a glass structure or other light-permeable structure of a building must not cause a danger of falling or a danger of injury from fragments falling onto persons below.,{'ID': '67_Finnish_SafetyOfUse'},The breaking of a <e1>glass structure</e1> or other light-permeable structure of a <e2>building</e2> must not cause a danger of falling or a danger of injury from fragments falling onto persons below.,part-of,annotated
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and <e1>bathrooms</e1> as well as <e2>wash rooms</e2> in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",none,annotated
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new <e1>building</e1> as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. <e2>toilet facility</e2> intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",none,annotated
+8cef7dc5-2d76-4dd8-80c5-6861b11a8f6f_1,,,"Where the work concerns a building containing more than <e1>400-600mm</e1> <e2>roof structures</e2>, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",greater,synthetic
+5305da48-b810-4fd8-a0b3-7520f89ff401,"When installing or renovating thermal elements, the element being installed should be draught-proofed, and air-leakage gaps should be filled.",{'ID': '194_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When installing or <e1>renovating</e1> thermal elements, the element being installed should be <e2>draught-proofed</e2>, and air-leakage gaps should be filled.",none,annotated
+d342429e-d3fc-46e0-a195-527cfef1fd4b_8,,,"When an existing building with a total useful <e1>Extract</e1> of over <e2>1m3/s</e2> is being extended or the habitable area is being increased, consequential improvements should be installed.",greater,synthetic
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_2,,,"If the air flows of extract air categories 1 and 2 are combined into the same duct and <e1>shape</e1> <e2>EI 30</e2> air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+4e119abd-0cf7-4c60-9c7b-1083f9b46280,"NOTE: If an exposed facade is close to an area of sustained and loud noise (e.g. a main road), then a noise attenuating background ventilator should be fitted.",{'ID': '85_UK_DocF_V2_Ventilation'},"NOTE: If an exposed <e1>facade</e1> is <e2>close to an area of sustained and loud noise (e.g. a main road)</e2>, then a noise attenuating background ventilator should be fitted.",selection,annotated
+7d877df3-9aa7-4dff-a64d-5356a66c944d,"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a width exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",{'ID': '59_Finnish_SafetyOfUse'},"In public <e1>outdoor and indoor spaces</e1>, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of <e2>stairs</e2> or ramps that have a width exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",none,annotated
+aa921550-3c5f-470b-b578-1788f83b49a7,Uplighters mounted at low or floor level can disorientate some visually impaired people and should be avoided.,{'ID': '153_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Uplighters</e1> mounted at low or floor level can disorientate some visually impaired people and should be <e2>avoided</e2>.,necessity,annotated
+2cf150af-bede-4bb6-aa2e-b9f42a109761,The warning should be placed sufficiently in advance of the hazard to allow time to stop and not be so narrow that it might be missed in a single stride.,{'ID': '53_UK_DocM_V2_AccessAndUseOfBuildings'},The <e1>warning</e1> should be placed sufficiently in advance of the hazard to allow time to stop and <e2>not be so narrow that it might be missed in a single stride</e2>.,necessity,annotated
+8207751f-13b8-4fe3-9bfe-4423093d4905_5,,,A building with dwellings or accommodation or patient rooms shall be designed and implemented so that the <e1>thick</e1> of the staircase and exit route is no more than <e2>1000m2</e2>.,less-equal,synthetic
+d3fc8c9b-c23a-4188-8723-369caa90453c,"The reference value for a building's total combined window area is 15 of the sum total of the floor  plate areas  of  the  buildings  storeys that  are  fully  or in  part  above  the  ground  but, however, at most 50 of the building's facade area.",{'ID': '124_Finnish_EnergyEfficiency'},"The <e1>reference value</e1> for a building's total combined window area is 15 of the sum total of the floor plate areas of the buildings <e2>storeys</e2> that are fully or in part above the ground but, however, at most 50 of the building's facade area.",none,annotated
+9ff8b8fd-5361-4c3d-9a7e-7459276c8df7_9,,,The <e1>Unit length</e1> must not exceed the individual dwellings <e2>primary energy content</e2>.,less-equal,synthetic
+4abb3268-3ba6-47e8-a8b7-4676dbaa9a16_0,,,"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide all means of escape routes with a minimum clear <e1>installation</e1> of <e2>200 m2</e2>, except in doorways.",equal,synthetic
+4f2b56cb-9852-4406-bbea-31f426fb4910,"replacing a heating system including the heating appliance, pipework and heat emitters), the energy performance of the whole system should be assessed, and the results documented and handed over to the building owner with the manufacturers supporting literature.",{'ID': '397_UK_DocM_V2_AccessAndUseOfBuildings'},"replacing a heating system including the heating appliance, <e1>pipework</e1> and heat emitters), the energy performance of the whole system should be <e2>assessed, and the results documented and handed over to the building owner with the manufacturers supporting literature</e2>.",none,annotated
+72d7716f-7e3e-442c-9e42-14d4b19e18e3_5,,,A <e1>Provision</e1> that is being connected to a new building should not have a <e2>anthracite figure</e2> for delivered heat to the building which is greater than 0.350kgCO2/kWh.,not-part-of,synthetic
+cea6e7bd-c494-4146-9f81-3fd2ed64a2a6,The slope of the floor surface in the seating area and access route may not exceed 8 per cent (1:12.5).,{'ID': '119_Finnish_SafetyOfUse'},The slope of the <e1>floor</e1> surface in the <e2>seating area</e2> and access route may not exceed 8 per cent (1:12.5).,part-of,annotated
+a894077e-cebf-4559-9254-ce964bc11b0f,Air flow rates for mechanical ventilation in new dwellings must be measured.,{'ID': '182_UK_DocF_V1_Ventilation'},<e1>Air flow rates</e1> for mechanical ventilation in new dwellings must be <e2>measured</e2>.,necessity,annotated
+5e51b653-449e-4d00-be19-0e20ecff5c49_2,,,The default <e1>flushing</e1> should be <e2>eight per cent</e2>.,equal,synthetic
+9952f64d-e0df-4b03-84af-150782f81387,"For mobility-impaired people, a going of at least 300mm is preferred.",{'ID': '124_UK_DocM_V2_AccessAndUseOfBuildings'},"For mobility-impaired <e1>people</e1>, a going of at least <e2>300mm</e2> is preferred.",none,annotated
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_4,,,"In buildings more than 9 metres and at most 28 metres in height, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than <e1>500kW</e1> in <e2>maintained</e2>, these must be accessible via the interior.",greater,synthetic
+bfdf95da-d422-47cd-83d7-a30a4969f2e6,"If the internal ties must be centred on the supporting line, the minimum value of the tie force, 10 kN, will also be applied to internal ties.",{'ID': '180_Finnish_StabilityOfStructures'},"If the internal ties must be <e1>centred on the supporting line</e1>, the minimum value of the <e2>tie force</e2>, 10 kN, will also be applied to internal ties.",none,annotated
+3c0a8ccb-d813-40fb-b69b-88250d3bc4ec_2,,,These fittings should not exceed a <e1>heat loss</e1> of <e2>60 persons</e2>.,less-equal,synthetic
+b6e6ebce-e75f-4fae-b9a2-e35c164b3fb4,"Where onsite electricity generation and storage is installed, such as photovoltaic panels or battery storage, systems should be an appropriate size for the site, available infrastructure and onsite energy demand.",{'ID': '342_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where onsite electricity generation and storage is installed, such as <e1>photovoltaic panels</e1> or battery storage, <e2>systems</e2> should be an appropriate size for the site, available infrastructure and onsite energy demand.",none,annotated
+75c60084-6878-472d-8694-e8739e0dd76c_0,,,The width of access routes in assembly areas with a <e1>service life</e1> of <e2>50 m2</e2> must be at least 900 millimetres.,equal,synthetic
+802f724b-cd37-4e78-9cbc-42ccec62237f,"System controls should be wired so that when there is no demand for space heating or hot water, the heating appliance, if appropriate, and pump are switched off.",{'ID': '306_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>System controls</e1> should <e2>be wired so that when there is no demand for space heating or hot water, the heating appliance, if appropriate, and pump are switched off</e2>.",necessity,annotated
+333110c1-ba9e-4c1d-9249-6604f49ba09a,"The presence of doors, whether open or closed, should be apparent to visually impaired people through the careful choice of colour and material for the door and its surroundings.",{'ID': '91_UK_DocM_V2_AccessAndUseOfBuildings'},"The <e1>presence</e1> of doors, whether open or <e2>closed</e2>, should be apparent to visually impaired people through the careful choice of colour and material for the door and its surroundings.",none,annotated
+c47598f9-df79-4d77-aba9-8f380342372f,extract air of category 4 shall be conducted to the outdoors through individual extract air ducts.,{'ID': '88_Finnish_Health-IndoorClimateAndVentilation'},extract air of <e1>category</e1> <e2>4</e2> shall be conducted to the outdoors through individual extract air ducts.,equal,annotated
+7e34700e-92de-4b00-a820-f4085a2e186c_9,,,"If the free gap between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than 2 metres, the wall in question must be <e1>constraints</e1> <e2>50mm</e2>.",equal,synthetic
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_5,,,"The wall ties should have a horizontal spacing of 900mm and a <e1>relationship</e1> of <e2>0.3</e2>, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",equal,synthetic
+d3fc8c9b-c23a-4188-8723-369caa90453c,"The reference value for a building's total combined window area is 15 of the sum total of the floor  plate areas  of  the  buildings  storeys that  are  fully  or in  part  above  the  ground  but, however, at most 50 of the building's facade area.",{'ID': '124_Finnish_EnergyEfficiency'},"The reference value for a building's total combined window area is <e1>15</e1> of the <e2>sum total</e2> of the floor plate areas of the buildings storeys that are fully or in part above the ground but, however, at most 50 of the building's facade area.",part-of,annotated
+76bf63bd-30f4-440d-81a0-61ca16170f70_1,,,Control should be maximised and heat gain to uninsulated pipes should only be permitted where the <e1>performance</e1> is less than <e2>900mm</e2> of the total load.,less,synthetic
+3c28dbd6-8a3d-4ede-ae08-89e4b5d69d60_4,,,The approach route is a minimum of 900mm wide with a maximum <e1>instantaneous carbon monoxide concentration</e1> of <e2>6m</e2>.,less-equal,synthetic
+8207751f-13b8-4fe3-9bfe-4423093d4905_6,,,A building with dwellings or accommodation or patient rooms shall be designed and implemented so that the <e1>product certificate</e1> of the staircase and exit route is no more than <e2>56 metres</e2>.,less-equal,synthetic
+9ff8b8fd-5361-4c3d-9a7e-7459276c8df7_11,,,The <e1>topography</e1> must not exceed the individual dwellings <e2>dwelling emission rate</e2>.,less-equal,synthetic
+3639910c-8ebf-499a-aeec-6f1951b28134,"Additionally, insulated plaster-board should be used in reveals to abut jambs and should be considered within reveal soffits.",{'ID': '166_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Additionally, insulated <e1>plaster-board</e1> should be used in reveals to abut jambs and should be <e2>considered within reveal soffits</e2>.",necessity,annotated
+50e89a86-e2be-439d-b230-79274cd7199b_10,,,Modular and portable buildings with a planned <e1>total flow rate</e1> of more than <e2>44mm</e2> at a single location should be shown to comply with the energy efficiency requirements.,greater,synthetic
+e1f1aeb9-7453-4b6b-b3f1-6049d711868a,The fire performance of the external wall structure of a building no more than 56 metres in height may also be demonstrated by a fullscale test.,{'ID': '156_Finnish_FireSafety'},The <e1>fire performance</e1> of the <e2>external</e2> wall structure of a building no more than 56 metres in height may also be demonstrated by a fullscale test.,none,annotated
+5ca184fa-e100-4f97-957d-e37ae944786f_8,,,The <e1>target primary energy rate</e1> of installing electric vehicle charge points and cable routes is not more than <e2>0.2</e2> of the total capital cost of the major renovation.,less-equal,synthetic
+0da52584-1b37-48b5-840f-3795ae695275_6,,,the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where <e1>0.1m2</e1> <e2>window unit</e2> are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+60205cf2-fa87-4195-9415-a6fb144a9b72,"Entrances and passageways to playgrounds and recreation areas used in the wintertime, as well as street areas surrounding the building and other public areas, must be protected from snow and ice falling from the roof of the building using snow barriers, taking into account the pitch of the roof.",{'ID': '96_Finnish_SafetyOfUse'},"<e1>Entrances</e1> and passageways to playgrounds and recreation areas <e2>used in the wintertime</e2>, as well as street areas surrounding the building and other public areas, must be protected from snow and ice falling from the roof of the building using snow barriers, taking into account the pitch of the roof.",selection,annotated
+36650de0-ef3c-4fd1-8199-f47c0e576076_8,,,the <e1>total extract air flow</e1> of the platform does not exceed <e2>2m</e2>.,less-equal,synthetic
+7e34700e-92de-4b00-a820-f4085a2e186c_1,,,"If the free gap between facing walls of adjacent glazed balconies or the <e1>absence</e1> of the wall to the window of an adjacent fire compartment is less than <e2>50 millimetres</e2>, the wall in question must be class EI 15.",less,synthetic
+66b3628a-f0ee-4bc7-93c8-2ae0145a2e78_8,,,"In a <e1>Dwellings</e1> with no openable <e2>door systems</e2>, an intermittent extract fan should be provided with controls which continue to operate the fan for at least 15 minutes after the room is vacated.",not-part-of,synthetic
+fb5d3054-4911-4049-ba09-1c3e80f9c07c_10,,,"The <e1>breaking</e1> of steps in uncovered or unheated outdoor staircases must be no less than <e2>25mm</e2>, and the riser may be no more than 130 millimetres.",greater-equal,synthetic
+cd904a0f-c120-4c67-bcff-6fcc77abca62,Any future connection locations should be clearly identified and labelled.,{'ID': '116_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},Any future connection <e1>locations</e1> should be <e2>clearly identified</e2> and labelled.,necessity,annotated
+bf798097-bb99-42d0-a73f-8cebab8fbeb8_5,,,"In the entrance halls and other indoor areas of administrative, service and business premises and in assembly areas, the <e1>performance standards</e1> of the steps must be no more than <e2>100 litres</e2> and the tread must be no less than 300 millimetres.",less-equal,synthetic
+05864826-21ef-4ae7-9af8-2aaeffc7267a_5,,,Modular and portable buildings with a planned <e1>type and quality</e1> of more than <e2>500 millimetres</e2> but with an intended time of use in a single location of less than two years should be shown to comply with the energy efficiency requirements.,greater,synthetic
+164122ed-c7ac-4cf8-8a54-3d56c144f78d_9,,,"In general, the findings indicate that there should be at least the same number of <e1>heating technology</e1> as <e2>fire-extinguishing system</e2> and for some building types, e.g. large retail buildings, at least twice as many.",greater-equal,synthetic
+371e1755-8bb5-456e-bf66-5a50f4c19d59,"Where there is full-height structural guarding, if you provide a second (lower) handrail, the vertical height from the pitch line of the steps (or the surface of the ramp) to the top of the second (lower) handrail should be 600mm.",{'ID': '50_UK_DocK_ProtectionFromFalling'},"Where there is <e1>full-height structural</e1> guarding, if you provide a second (lower) handrail, the vertical height from the pitch line of the steps (or the surface of the ramp) to the top of the second (lower) handrail should be <e2>600mm</e2>.",none,annotated
+83ff563b-077a-4849-b526-382fbb012647,The breaking of a glass structure or other light-permeable structure of a building must not cause a danger of falling or a danger of injury from fragments falling onto persons below.,{'ID': '67_Finnish_SafetyOfUse'},The <e1>breaking</e1> of a glass structure or other <e2>light-permeable structure</e2> of a building must not cause a danger of falling or a danger of injury from fragments falling onto persons below.,part-of,annotated
+a1f91cfd-21f8-49a4-8468-746f49f4848e_4,,,"For a building that contains more than <e1>7 mg/m3 (6 ppm)</e1> <e2>circulation  piping</e2> for example a block of flats or a terrace of houses an average target primary energy rate, target emission rate and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",greater,synthetic
+76acc6bd-50c0-4f3f-b015-42e171ec6ce7_9,,,<e1>20 degrees Celsius</e1> <e2>toilet washroom</e2> must be installed.,equal,synthetic
+45338082-ca66-418b-8fe1-8f2be926f330_6,,,A <e1>ventilators</e1> of no more than <e2>65mm</e2> may pass between the stair steps.,less-equal,synthetic
+75c60084-6878-472d-8694-e8739e0dd76c,The width of access routes in assembly areas with a maximum capacity of 60 persons must be at least 900 millimetres.,{'ID': '115_Finnish_SafetyOfUse'},The width of <e1>access routes</e1> in <e2>assembly areas</e2> with a maximum capacity of 60 persons must be at least 900 millimetres.,part-of,annotated
+45adb0b6-63ee-4f42-b6a3-8fc396221c67_11,,,The <e1>air flow resistance</e1> of the insulation plus any required air gap should be at least to the <e2>power requirements</e2> of the rafters.,greater-equal,synthetic
+51550284-0701-41b2-9a76-a0061d16938a,"Windows and doors: to ensure continuity of the air barrier, window and door units should connect to the primary air barrier and window and door frames should be taped to surrounding structural openings, using air sealing tape.",{'ID': '188_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Windows and doors: to ensure continuity of the air barrier, window and door units should connect to the primary air barrier and <e1>window and door frames</e1> should be <e2>taped to surrounding structural openings, using air sealing tape</e2>.",necessity,annotated
+7e369e4c-7768-4a7a-bd9c-41e2aa037b43,The air flows shall be designed so that the average carbon monoxide concentration in a parking garage for motor vehicles during the hour of use assessed as the most critical does not exceed 35 mg/m3 (30 ppm).,{'ID': '61_Finnish_Health-IndoorClimateAndVentilation'},The air flows shall be <e1>designed</e1> so that the <e2>average carbon monoxide concentration</e2> in a parking garage for motor vehicles during the hour of use assessed as the most critical does not exceed 35 mg/m3 (30 ppm).,selection,annotated
+8595e26e-db5c-4d09-9fcf-02b530b61e23,There must be access to each fire compartment of an attic for firefighting operations.,{'ID': '240_Finnish_FireSafety'},There must be <e1>access</e1> to each <e2>fire compartment</e2> of an attic for firefighting operations.,necessity,annotated
+569c7958-b7d6-4b9c-9dd9-13307e95e59b_0,,,"For ducted systems that are served by fans with a <e1>prevailing wind direction</e1> greater than <e2>40</e2>, ductwork leakage tests should be carried out.",greater,synthetic
+84cd76d7-e5d0-4f39-94bc-0236c65d533a,"in residential buildings of not more than two storeys, one exit of no less than 900 millimetres in width is permitted.",{'ID': '217_Finnish_FireSafety'},"in residential buildings of not more than two <e1>storeys</e1>, one <e2>exit</e2> of no less than 900 millimetres in width is permitted.",none,annotated
+12907c6f-e734-436d-a7de-c8a1626fbe92,"Both:the area of rooflights exceeds 20 of the area of the roof, and the design solar load exceeds 25W/m2.",{'ID': '496_UK_DocM_V2_AccessAndUseOfBuildings'},"Both:the area of rooflights exceeds <e1>20</e1> of the area of the <e2>roof</e2>, and the design solar load exceeds 25W/m2.",none,annotated
+1d10aa43-7650-46b1-83c3-867f212ab9c3,Background ventilators should meet the performance standards for both of the following: a. air flow from outside to inside the dwelling; b. air flow from inside the dwelling to outside.,{'ID': '58_UK_DocF_V1_Ventilation'},Background ventilators should meet the performance standards for both of the following: a. air flow from outside to inside the dwelling; b. <e1>air flow</e1> <e2>from inside the dwelling to outside</e2>.,selection,annotated
+d56a51f7-6ec0-457b-a9ed-263fffe3a3e2,"Once open, all doors to accessible entrances should be wide enough to allow unrestricted passage for a variety of users, including wheelchair users, people carrying luggage, people with assistance dogs, and parents with pushchairs and small children.",{'ID': '66_UK_DocM_V2_AccessAndUseOfBuildings'},"Once open, all <e1>doors</e1> to accessible entrances should be <e2>wide enough to allow unrestricted passage for a variety of users, including wheelchair users, people carrying luggage, people with assistance dogs, and parents with pushchairs and small children</e2>.",necessity,annotated
+389c960b-525d-4f2e-9a2c-1805eb2dc20d_9,,,The full <e1>air extract rate</e1> under a stair that forms part of the storage provision should be counted as <e2>ten millimetres</e2>.,equal,synthetic
+4a82f789-a98a-4379-9b81-2a20cfba6c87,"If the internal ties must be centred on the supporting line, the minimum value of the tie force, 70 kN, will also be applied to internal ties.",{'ID': '179_Finnish_StabilityOfStructures'},"If the internal <e1>ties</e1> must be centred on the supporting line, the minimum value of the tie force, <e2>70 kN</e2>, will also be applied to internal ties.",none,annotated
+23cff3c3-1251-4c5f-9fd9-8f52d25eb494,Gasfired boilers and multi-stage oilfired boilers with an output of more than 500kW should have fully modulating burner controls.,{'ID': '252_UK_DocM_V2_AccessAndUseOfBuildings'},Gasfired boilers and multi-stage oilfired boilers with an output of more than <e1>500kW</e1> should have <e2>fully modulating burner controls</e2>.,none,annotated
+b6b19c38-b160-475d-b01d-e3880ca00ab2,"Where necessary, flexible ducts may be used for final connections, but their lengths should be kept to a minimum.",{'ID': '31_UK_DocF_V2_Ventilation'},"Where necessary, flexible ducts may be used for final connections, but <e1>their</e1> <e2>lengths</e2> should be kept to a minimum.",part-of,annotated
+84033aa1-c68d-457c-b7d8-893e879cd196,The pumping station shall be equipped with a malfunction detector.,{'ID': '131_Finnish_Health-WaterAndSewerage'},The <e1>pumping station</e1> shall be equipped with a <e2>malfunction detector</e2>.,necessity,annotated
+44b436fd-26ab-4b00-82e9-9565e73bb87e,NOTE: Any method to reduce overheating risk in residential buildings must comply with all other parts of the Building Regulations.,{'ID': '65_UK_DocO_Overheating'},NOTE: Any <e1>method</e1> to reduce overheating risk in residential buildings must <e2>comply with all other parts of the Building Regulations</e2>.,necessity,annotated
+5ca184fa-e100-4f97-957d-e37ae944786f_9,,,The <e1>wide</e1> of installing electric vehicle charge points and cable routes is not more than <e2>1</e2> of the total capital cost of the major renovation.,less-equal,synthetic
+07565483-7508-43fc-b15e-82d95881e81e,"The average dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate should be calculated using the same averaging methodology.",{'ID': '70_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The average dwelling primary energy rate, dwelling emission rate and <e1>dwelling fabric energy efficiency rate</e1> should be <e2>calculated using the same averaging methodology</e2>.",necessity,annotated
+3121fe90-27db-405e-a42a-df3cd22ee176,"Where necessary, two handrails, one above the other, must be installed in order to take into account children and users of wheelchairs.",{'ID': '55_Finnish_SafetyOfUse'},"Where necessary, two <e1>handrails</e1>, one above the other, must be <e2>installed</e2> in order to take into account children and users of wheelchairs.",necessity,annotated
+a43037b0-8e35-45a2-9f23-c2d65f6c5a64,"Where access to the dwelling can be gained via an interconnecting doorset from the garage, then either the garage doorset (pedestrian and vehicular) or the interconnecting doorset should be a secure doorset.",{'ID': '8_UK_DocQ_Security_Dwellings'},"Where <e1>access</e1> to the dwelling can be <e2>gained via an interconnecting doorset from the garage</e2>, then either the garage doorset (pedestrian and vehicular) or the interconnecting doorset should be a secure doorset.",selection,annotated
+451e7c91-d39f-4401-a0e3-5ab455ab0442,"The approach route should be level, gently sloping, or, where necessary, ramped.",{'ID': '15_UK_DocM_V1_AccessAndUseOfBuildings'},"The <e1>approach route</e1> should be level, gently sloping, or, <e2>where necessary, ramped</e2>.",necessity,annotated
+99a53f17-48cb-4012-a47b-700761e0983b,Where a new building which is not a residential building or a mixed-use building has more than 10 parking spaces (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,{'ID': '61_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},Where a new building which is not a residential building or a mixed-use building has more than 10 parking spaces (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) <e1>cable routes</e1> for <e2>electric vehicle charge points</e2> must be installed in a minimum of one fifth of the total number of remaining parking spaces.,part-of,annotated
+8e7e4d9a-05b8-4512-91c5-e8dbb9488685,"At night, windows, patio doors and balcony doors should be modelled as closed.",{'ID': '55_UK_DocO_Overheating'},"At night, <e1>windows</e1>, patio doors and balcony doors should be <e2>modelled as closed</e2>.",necessity,annotated
+f7cfdf57-28f3-4d23-90bf-ec2268e14bac,"Ramps, steps, thresholds and differences in levels in passageways must be clearly indicated using lighting and surface brightness contrasts or warning signs.",{'ID': '65_Finnish_SafetyOfUse'},"Ramps, <e1>steps</e1>, thresholds and differences in levels in <e2>passageways</e2> must be clearly indicated using lighting and surface brightness contrasts or warning signs.",selection,annotated
+3724fd47-22f7-432c-81a2-1abcb95c7df2,"The total number of ventilators installed in a dwellings habitable rooms and kitchens should be no fewer than five, except in one bedroom properties, where there should be no fewer than four.",{'ID': '96_UK_DocF_V1_Ventilation'},"The <e1>total number of ventilators</e1> installed in a <e2>dwellings</e2> habitable rooms and kitchens should be no fewer than five, except in one bedroom properties, where there should be no fewer than four.",none,annotated
+7134933d-17df-4a8c-b72e-1c09177bad1c,The spread of fire in voids of wall-type building elements must be restricted at least by storey.,{'ID': '130_Finnish_FireSafety'},The <e1>spread of fire</e1> in voids of wall-type <e2>building elements</e2> must be restricted at least by storey.,none,annotated
+457ecdc0-8247-4ad4-9beb-3b7a31cfa0fd,"All public areas, including lavatory accommodation, public telephones and external terraces should be accessible.",{'ID': '138_UK_DocM_V2_AccessAndUseOfBuildings'},"All <e1>public areas</e1>, including lavatory accommodation, public telephones and external terraces should be <e2>accessible</e2>.",necessity,annotated
+3724fd47-22f7-432c-81a2-1abcb95c7df2_6,,,"The total number of ventilators installed in a dwellings habitable rooms and kitchens should be no fewer than five, except in one bedroom <e1>basins</e1>, where there should be no fewer than <e2>25mm</e2>.",greater-equal,synthetic
+7f49ccb1-ce2c-47eb-8b22-2c8e806e5d88_11,,,The resilient layer should be to the full height of the door and <e1>15mm</e1> <e2>category</e2> of the doorset.,equal,synthetic
+9027959e-efc1-4d32-acbe-e0775d40f001_8,,,"The morticed bolts should have a minimum <e1>vicinity</e1> of <e2>50mm</e2>, should be at least 100mm from the top and bottom corners of the door, and should avoid any door construction joints.",greater-equal,synthetic
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_11,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the <e1>design</e1> from these spaces does not exceed <e2>65 degrees Celsius</e2> of the total air flow in the vertical duct.",less-equal,synthetic
+d3e7a947-536e-4a49-9823-e27fc0f68b27_8,,,<e1>measures</e1> of landings to be at least equal to the <e2>domestic hot water circulation heat loss</e2> of the ramp.,greater-equal,synthetic
+d04d6702-5170-4b50-9bda-7367a24e9322,"NOTE: The network distribution point could be in a cabinet, a box mounted on a wall or on a telegraph pole.",{'ID': '5_UK_DocR_V1_InfrastructureForElectircalCommunications'},"NOTE: The network distribution point could be in a cabinet, a <e1>box</e1> <e2>mounted on a wall</e2> or on a telegraph pole.",selection,annotated
+0da52584-1b37-48b5-840f-3795ae695275,the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,{'ID': '119_UK_DocM_V2_AccessAndUseOfBuildings'},the minimum clear <e1>dimensions</e1> of the platform are: 1100mm wide and 1400mm deep where two doors are <e2>located at 90° relative to each other</e2> and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,none,annotated
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_9,,,Skirtings totalling up to <e1>8 per cent (1:12.5)</e1> <e2>differences</e2> and shallow projecting ducts or casings above 1800mm may be discounted when measuring clear width.,less-equal,synthetic
+75c60084-6878-472d-8694-e8739e0dd76c_7,,,The width of access routes in assembly areas with a <e1>step</e1> of <e2>65 degrees Celsius</e2> must be at least 900 millimetres.,equal,synthetic
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_7,,,"If the air flows of <e1>elevation difference</e1> <e2>50 m2</e2> and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+716fa732-f3c7-43ad-a4e3-fff43a841018,The vehicle traffic area of a building and its courtyard must be safe and appropriate.,{'ID': '131_Finnish_SafetyOfUse'},The vehicle traffic area of a building and its <e1>courtyard</e1> must be safe and <e2>appropriate</e2>.,necessity,annotated
+a477ee34-044e-443b-a95f-fbb1da913c38,"Changing places toilets, facilities designed for individuals with complex and multiple impairments who may require the assistance of up to two assistants, should be provided in addition to any wheelchair-accessible accommodation in separate-sex toilet washrooms, wheelchair-accessible unisex toileting facilities and baby changing facilities.",{'ID': '160_UK_DocM_V2_AccessAndUseOfBuildings'},"Changing places toilets, facilities designed for individuals with complex and multiple impairments who may require the assistance of up to two assistants, should be provided in addition to any wheelchair-accessible <e1>accommodation</e1> in <e2>separate-sex</e2> toilet washrooms, wheelchair-accessible unisex toileting facilities and baby changing facilities.",none,annotated
+0365837b-a04d-4aaf-a2f5-2e89403a9c2b,"If all the terminals have to be set to a significantly closed position to achieve the required air flow rate, then the fan speed should be reduced and the terminals rebalanced.",{'ID': '200_UK_DocF_V1_Ventilation'},"If all the terminals have to be set to a significantly closed position to achieve the required air flow rate, then the <e1>fan</e1> <e2>speed</e2> should be reduced and the terminals rebalanced.",part-of,annotated
+5f675f4f-74de-4d0f-ae92-c3500d2d952e,The actual equivalent area and location of installed background ventilators should be recorded.,{'ID': '189_UK_DocF_V1_Ventilation'},The <e1>actual</e1> <e2>equivalent area</e2> and location of installed background ventilators should be recorded.,selection,annotated
+536b172d-ccd1-479a-8136-6ee05db0f264,"Where pipework is above ground, the performance of the pipe insulation should be at least as high as the insulating performance of pipework in the buried part of the system.",{'ID': '205_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where pipework is above ground, the performance of the pipe insulation should be at least as high as the insulating performance of <e1>pipework</e1> in the <e2>buried part</e2> of the system.",part-of,annotated
+922bf8df-3a70-4f45-8c04-200b638d3b3c_1,,,The cold water pipe shall be designed and installed so that the <e1>tie force</e1> in the cold water system may not exceed <e2>500 millimetres</e2>.,less-equal,synthetic
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms <e1>in connection with saunas</e1>; 2. <e2>laundry room</e2>; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",none,annotated
+08075a86-82be-487e-915b-2c8423f95cb8,The equivalent area of the opening should meet or exceed the free area of the opening.,{'ID': '39_UK_DocO_Overheating'},The <e1>equivalent area</e1> of the <e2>opening</e2> should meet or exceed the free area of the opening.,part-of,annotated
+34a524ec-6994-426f-86af-78788fd34a80,"Between the locking points for the mortice lock and surface-mounted rim lock, the distance should be 400-600mm.",{'ID': '36_UK_DocQ_Security_Dwellings'},"Between the locking points for the mortice lock and surface-mounted <e1>rim lock</e1>, the <e2>distance</e2> should be 400-600mm.",part-of,annotated
+2238d6ef-421b-4f84-b24d-d46c6ba2afc5,"For example, when a door is open, people with impaired sight should be able to identify the door opening within the wall, as well as the leading edge of the door.",{'ID': '92_UK_DocM_V2_AccessAndUseOfBuildings'},"For example, when a door is open, <e1>people</e1> <e2>with impaired sight</e2> should be able to identify the door opening within the wall, as well as the leading edge of the door.",selection,annotated
+e505b13c-7b62-4857-aa2d-544dc986e9c0,"For dwellings, for external tapered steps and stairs that are part of the building the going of each step should be a minimum of 280mm.",{'ID': '18_UK_DocK_ProtectionFromFalling'},"For dwellings, for external tapered <e1>steps</e1> and stairs that are part of the building the going of each <e2>step</e2> should be a minimum of 280mm.",none,annotated
+f7f1a609-ae35-4544-9b38-e471d7a00666,"In order to enhance the efficiency of firefighting and rescue operations, means of smoke extraction shall be designed and constructed in the building so that smoke can be extracted from the different premises in the building.",{'ID': '249_Finnish_FireSafety'},"In order to enhance the efficiency of firefighting and rescue operations, means of smoke extraction shall be <e1>designed and constructed</e1> in the building so that <e2>smoke can be extracted from the different premises in the building</e2>.",selection,annotated
+88e23b46-22d9-4be6-87b7-40541f7995a9_2,,,"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the <e1>category</e1> exceeds <e2>2.5 ties/m2</e2>; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",greater,synthetic
+0da52584-1b37-48b5-840f-3795ae695275,the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,{'ID': '119_UK_DocM_V2_AccessAndUseOfBuildings'},the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where two <e1>doors</e1> are <e2>located at 90° relative to each other</e2> and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,selection,annotated
+3f7c10d1-d801-4351-bc85-187cf8cffeb3,The water vapour resistance and air tightness of external walls and their various layers as well as the structures attached to the external wall and joints to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,{'ID': '96_Finnish_Health-Humidity'},The water vapour resistance and <e1>air tightness</e1> of external walls and their various layers as well as the structures attached to the external wall and joints to the external wall must <e2>prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures</e2>.,necessity,annotated
+5fa7daca-cb50-4397-a736-617e52d30187_11,,,"If efficiencies at below 30% are required and unavailable, the <e1>above</e1> may be taken as equal to that at <e2>0.15</e2>.",equal,synthetic
+7d877df3-9aa7-4dff-a64d-5356a66c944d_3,,,"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a <e1>atmosphere</e1> exceeding <e2>0.9 metres</e2> and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",greater,synthetic
+656aa2fa-18cb-41ee-ae28-28deb3dffcc3_1,,,The <e1>insulating performance</e1> of the water in the hot water system shall be at least <e2>4</e2> and available from the hot water plumbing fixture within 20 seconds.,greater-equal,synthetic
+956efc87-87de-4d3c-99fb-dc58eab9353b_4,,,A dwelling that is intended for sheltered housing or supported housing of a person with mobility or functional impairment shall have at least one toilet and washing facility which has a free space with a <e1>that</e1> of at least <e2>23C</e2>.,greater-equal,synthetic
+6a41a473-bd3c-4e38-a093-094b3fdae388_5,,,At least one in every <e1>0.15 dm3/s per m2</e1> remaining <e2>low expansion foam</e2> must be provided with cable routes.,equal,synthetic
+6414854d-01f9-481f-a7f4-c4581e48d8b1_7,,,Special safety features are not necessary if the <e1>sleeping accommodation</e1> is not more than <e2>25 decibels</e2> long.,less-equal,synthetic
+ae098b28-f01d-44df-b601-b7ac7631101d,"On stairs and ramps, a handrail must be installed for the entire length and on both sides of the structure.",{'ID': '54_Finnish_SafetyOfUse'},"On stairs and ramps, a <e1>handrail</e1> must be installed for the entire length and on <e2>both sides</e2> of the structure.",necessity,annotated
+c5a6cac6-a314-47b1-aabd-13f2d1b7ad56,A step-free approach route should be provided to all private entrances.,{'ID': '71_UK_DocM_V1_AccessAndUseOfBuildings'},A step-free approach route should be provided to all <e1>private</e1> <e2>entrances</e2>.,selection,annotated
+103f99ad-884b-4bae-9f22-ccb1c5bc3d26,"In an open garage of no more than five storeys, the maximum area may be used as the surface area of the storeys, even though the driveways between the various storeys are combined.",{'ID': '110_Finnish_FireSafety'},"In an open garage of no more than <e1>five</e1> <e2>storeys</e2>, the maximum area may be used as the surface area of the storeys, even though the driveways between the various storeys are combined.",less-equal,annotated
+a538fc03-db66-4b31-b40f-e41754522010,The three-part form should be completed for each installation address.,{'ID': '264_UK_DocF_V1_Ventilation'},The <e1>three-part</e1> <e2>form</e2> should be completed for each installation address.,selection,annotated
+835d8fad-7a27-4299-aa38-a5b1771a6779,"In large building complexes, such as retail parks and large sports centres, there should be one wheelchair-accessible unisex toilet capable of including an adult changing table.",{'ID': '178_UK_DocM_V2_AccessAndUseOfBuildings'},"In large building complexes, such as <e1>retail parks</e1> and large sports centres, there should be one wheelchair-accessible unisex <e2>toilet</e2> capable of including an adult changing table.",none,annotated
+53e31e26-a39b-4047-a86e-bdb8021413e8,Window handles on windows that open outwards are not more than 650mm from the inside face of the wall when the window is at its maximum openable angle.,{'ID': '84_UK_DocO_Overheating'},<e1>Window handles</e1> on <e2>windows</e2> that open outwards are not more than 650mm from the inside face of the wall when the window is at its maximum openable angle.,part-of,annotated
+8207751f-13b8-4fe3-9bfe-4423093d4905_1,,,A building with dwellings or accommodation or patient rooms shall be designed and implemented so that the <e1>level with entry</e1> of the staircase and exit route is no more than <e2>adequate means</e2>.,less-equal,synthetic
+e32bbb47-c826-40c1-8ea4-8c32353d3fd2_6,,,There shall be <e1>0.7</e1> of <e2>electric storage heaters</e2> provided for people in the building.,equal,synthetic
+7f3f59a4-fc7e-4b14-8074-384f6cacf548_9,,,"The height of a barrier in a dwellings indoor areas may, however, be at least 0.9 metres if the <e1>value</e1> is less than <e2>three</e2>.",less,synthetic
+a477ee34-044e-443b-a95f-fbb1da913c38,"Changing places toilets, facilities designed for individuals with complex and multiple impairments who may require the assistance of up to two assistants, should be provided in addition to any wheelchair-accessible accommodation in separate-sex toilet washrooms, wheelchair-accessible unisex toileting facilities and baby changing facilities.",{'ID': '160_UK_DocM_V2_AccessAndUseOfBuildings'},"Changing places toilets, facilities designed for individuals with complex and multiple impairments who may require the assistance of up to two assistants, should be provided in addition to any wheelchair-accessible accommodation in separate-sex <e1>toilet</e1> washrooms, wheelchair-accessible unisex toileting facilities and <e2>baby changing facilities</e2>.",none,annotated
+7d877df3-9aa7-4dff-a64d-5356a66c944d_7,,,"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a <e1>capacity</e1> exceeding <e2>90mm</e2> and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",greater,synthetic
+8b054fa5-fa6b-40f8-996a-a6dfea855fc3_7,,,"The <e1>thresholds</e1> between a door that opens onto a landing and the upper edge of the ramp or flight of stairs must be no less than <e2>65mm</e2> on the side wall and no less than 1,500 millimetres on the end wall.",greater-equal,synthetic
+fa8a6d84-eb99-490e-8169-3c65353fb553,"For large roofs, where the smaller horizontal dimension of the roof is 50 m or more, and the topography is windswept, the value of the exposure coefficient shall be at least 1.",{'ID': '61_Finnish_StabilityOfStructures'},"For large roofs, where the <e1>smaller</e1> horizontal <e2>dimension</e2> of the roof is 50 m or more, and the topography is windswept, the value of the exposure coefficient shall be at least 1.",selection,annotated
+92f99822-6896-4ade-abbe-7598f8225b9e,"The information should be provided in a clear manner, for a non-technical audience.",{'ID': '93_UK_DocO_Overheating'},"The <e1>information</e1> should be <e2>provided in a clear manner</e2>, for a non-technical audience.",necessity,annotated
+536b172d-ccd1-479a-8136-6ee05db0f264,"Where pipework is above ground, the performance of the pipe insulation should be at least as high as the insulating performance of pipework in the buried part of the system.",{'ID': '205_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where <e1>pipework</e1> is <e2>above ground</e2>, the performance of the pipe insulation should be at least as high as the insulating performance of pipework in the buried part of the system.",selection,annotated
+4fc3b5b1-a838-4429-b385-d8e80e6633eb,"In the absence of relevant harmonised European Standards, products with a travel exceeding 3m must have a product certificate issued by a Notified Body.",{'ID': '117_UK_DocM_V2_AccessAndUseOfBuildings'},"In the absence of relevant <e1>harmonised</e1> European Standards, products with a <e2>travel</e2> exceeding 3m must have a product certificate issued by a Notified Body.",none,annotated
+793cb939-b3d9-46eb-ae65-71a4d5c8031b_9,,,Where the parking is within the private curtilage of the dwelling (but not within a carport or garage) at least one space is a standard parking bay that can be <e1>design</e1> to <e2>56 metres</e2>.,less-equal,synthetic
+85cf77b8-70aa-4453-8d95-00f55a63c4ca,The provision made must be sufficient to (a) allow simple adaptation of the dwelling to meet the needs of occupants who use wheelchairs; or (b) meet the needs of occupants who use wheelchairs.,{'ID': '65_UK_DocM_V1_AccessAndUseOfBuildings'},The <e1>provision</e1> made must be sufficient to (a) <e2>allow simple adaptation of the dwelling to meet the needs of occupants who use wheelchairs</e2>; or (b) meet the needs of occupants who use wheelchairs.,necessity,annotated
+45338082-ca66-418b-8fe1-8f2be926f330_10,,,A <e1>Heat pumps</e1> of no more than <e2>0.9 metres</e2> may pass between the stair steps.,less-equal,synthetic
+f64c5a32-2f88-4be6-abf4-8870a4e51fdf,"The use of recirculation, transfer or secondary air shall not cause any harmful spread of impurities, in particular odours.",{'ID': '72_Finnish_Health-IndoorClimateAndVentilation'},"The use of <e1>recirculation</e1>, transfer or secondary <e2>air</e2> shall not cause any harmful spread of impurities, in particular odours.",selection,annotated
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_7,,,"In buildings more than <e1>20 millimetres</e1> and at most 28 metres in <e2>water vapour resistance</e2>, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",greater,synthetic
+2c725d50-13d5-4e77-bacf-9f174530e27c,The energy efficiency of historic and traditional buildings should be improved only if doing so will not cause long-term deterioration of the buildings fabric or fittings.,{'ID': '17_UK_DocM_V2_AccessAndUseOfBuildings'},The energy efficiency of <e1>historic</e1> and traditional <e2>buildings</e2> should be improved only if doing so will not cause long-term deterioration of the buildings fabric or fittings.,selection,annotated
+f72a98f3-b7d2-4633-b244-0d7242dfb0c9_3,,,Every single bedroom has a minimum <e1>free gap</e1> of <e2>1.501kWhPE/kWh</e2> and is at least 2.4m wide.,greater-equal,synthetic
+e8340500-38b6-461b-b00d-d3aa44ac1f0b_10,,,The <e1>Length</e1> of the water available from the hot water system may not exceed <e2>9 metres</e2>.,less-equal,synthetic
+28433761-e537-456b-9ff8-00e786b43143,Consumer units should be mounted so that the switches are between 1350mm and 1450mm above floor level.,{'ID': '126_UK_DocM_V1_AccessAndUseOfBuildings'},Consumer units should be mounted so that the <e1>switches</e1> are <e2>between 1350mm and 1450mm above floor level</e2>.,selection,annotated
+0a7ff0c7-c5f9-4069-9d7e-2bfd6c4871d3_10,,,The <e1>exceptional circumstances</e1> of the extension does not exceed <e2>01:08:00</e2>.,less-equal,synthetic
+"8feaf7f2-dfd8-43ae-ab8d-791ee1ffd86c	However, if the elevation difference is no more than 1,000 millimetres, the ramp may not have a gradient of more than eight per cent.	{'ID': '9_Finnish_Accessibility'}_2",,,"However, if the <e1>boiler efficiency</e1> is no more than <e2>50 millimetres</e2>, the ramp may not have a gradient of more than eight per cent.",less-equal,synthetic
+4e4fdf56-c45b-4d89-b18f-7a2f24a41ba9_4,,,"In spaces intended for more than 60 persons, the <e1>total flow rate</e1> of the access route must be at least <e2>0.7 metres</e2>.",greater-equal,synthetic
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c_7,,,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding <e1>0.136kgCO2/kWh</e1> <e2>facility for festive occasions</e2> is EI 30; however, minor sealing parts and penetrations may be class E 15.",greater,synthetic
+a1f91cfd-21f8-49a4-8468-746f49f4848e_5,,,"For a building that contains more than <e1>30m2</e1> <e2>organic substances</e2> for example a block of flats or a terrace of houses an average target primary energy rate, target emission rate and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",greater,synthetic
+35af73f1-53c7-4377-9da0-acf99eef4d8e,"WC compartment doors, and doors to wheelchair-accessible unisex toilets, changing rooms or shower rooms have an emergency release mechanism so that they are capable of being opened outwards, from the outside , in case of emergency.",{'ID': '159_UK_DocM_V2_AccessAndUseOfBuildings'},"WC compartment doors, and doors to wheelchair-accessible <e1>unisex</e1> <e2>toilets</e2>, changing rooms or shower rooms have an emergency release mechanism so that they are capable of being opened outwards, from the outside , in case of emergency.",selection,annotated
+35af73f1-53c7-4377-9da0-acf99eef4d8e,"WC compartment doors, and doors to wheelchair-accessible unisex toilets, changing rooms or shower rooms have an emergency release mechanism so that they are capable of being opened outwards, from the outside , in case of emergency.",{'ID': '159_UK_DocM_V2_AccessAndUseOfBuildings'},"WC compartment doors, and doors to <e1>wheelchair-accessible</e1> unisex toilets, <e2>changing rooms</e2> or shower rooms have an emergency release mechanism so that they are capable of being opened outwards, from the outside , in case of emergency.",none,annotated
+2a256a9c-0b8a-4acf-87e1-86a5857f36a3_2,,,"Where a driveway forms all, or part of, the approach route, an <e1>demonstrate compliance with Part F of the Building Regulations</e1> of at least <e2>20 litres per second</e2> wide should be provided so that a wheelchair user can pass a parked car.",greater-equal,synthetic
+6efbae9b-e306-4005-8881-aed97c54e405,Leakage from a pressure sewer located in a groundwater zone shall be detectable.,{'ID': '145_Finnish_Health-WaterAndSewerage'},Leakage from a <e1>pressure sewer</e1> located in a <e2>groundwater zone</e2> shall be detectable.,part-of,annotated
+1de9d3e5-dee3-42c9-b929-80b7936f1642,The lift shall provide access to the entrance level and each level with entry to a dwelling or a space serving the use of the building.,{'ID': '33_Finnish_Accessibility'},The lift shall provide access to the entrance level and each <e1>level with entry</e1> to a <e2>dwelling</e2> or a space serving the use of the building.,part-of,annotated
+8c7cf3d7-3ab9-4cb4-99bf-016cbbd4914d,Mechanical ventilation systems must be commissioned to provide adequate ventilation.,{'ID': '180_UK_DocF_V1_Ventilation'},<e1>Mechanical</e1> <e2>ventilation systems</e2> must be commissioned to provide adequate ventilation.,selection,annotated
+e505b13c-7b62-4857-aa2d-544dc986e9c0_0,,,"For dwellings, for external tapered steps and stairs that are part of the building the <e1>protective part</e1> of each step should be a minimum of <e2>0.8 metres</e2>.",greater-equal,synthetic
+5869233a-4fc0-48bf-9007-2b0c9a169fef,"A building shall, if its size, number of storeys or an intended purpose of a premises within the building so requires, be divided into fire compartments in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",{'ID': '100_Finnish_FireSafety'},"A building shall, if its size, number of storeys or an <e1>intended purpose</e1> of a <e2>premises</e2> within the building so requires, be divided into fire compartments in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",part-of,annotated
+244aeb26-ba33-498c-8a28-989b5aa879a8,The pumping station shall be water tight and resistant to earth pressure and it may not cause odour problem.,{'ID': '129_Finnish_Health-WaterAndSewerage'},The pumping station shall be water tight and resistant to earth pressure and <e1>it</e1> may <e2>not cause odour problem</e2>.,necessity,annotated
+c72a5952-2e0b-4d4a-9185-09e4149b6239,The flooring functioning as waterproofing or waterproofing located underneath the flooring in wet rooms must have a watertight connection with the waterproofing of the wall.,{'ID': '114_Finnish_Health-Humidity'},The <e1>flooring</e1> functioning as waterproofing or waterproofing located underneath the flooring in wet rooms must have a <e2>watertight connection</e2> with the waterproofing of the wall.,necessity,annotated
+9618a274-45da-4e3e-87f0-21c2bfae4a8e_6,,,"A guardrail must be used at points with a <e1>Unit length</e1> of over <e2>certain proportion</e2>, if these can be accessed by children.",greater,synthetic
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c_10,,,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding <e1>half</e1> <e2>air conditioner</e2> is EI 30; however, minor sealing parts and penetrations may be class E 15.",greater,synthetic
+fa8a6d84-eb99-490e-8169-3c65353fb553_9,,,"For large roofs, where the smaller horizontal dimension of the roof is 50 m or more, and the topography is windswept, the value of the <e1>energy savings</e1> shall be at least <e2>14 metres</e2>.",greater-equal,synthetic
+e8340500-38b6-461b-b00d-d3aa44ac1f0b_0,,,The <e1>Ventilation</e1> of the water available from the hot water system may not exceed <e2>250 millimetres</e2>.,less-equal,synthetic
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be class E 15.",{'ID': '134_Finnish_FireSafety'},"The fire compartmenting requirement for the balcony slab of a glazed balcony of a <e1>building</e1> exceeding two <e2>storeys</e2> is EI 30; however, minor sealing parts and penetrations may be class E 15.",part-of,annotated
+e505b13c-7b62-4857-aa2d-544dc986e9c0_3,,,"For dwellings, for external tapered steps and stairs that are part of the building the <e1>category</e1> of each step should be a minimum of <e2>2 metres</e2>.",greater-equal,synthetic
+05864826-21ef-4ae7-9af8-2aaeffc7267a_11,,,Modular and portable buildings with a planned <e1>spread of fire</e1> of more than <e2>300 litres</e2> but with an intended time of use in a single location of less than two years should be shown to comply with the energy efficiency requirements.,greater,synthetic
+50e89a86-e2be-439d-b230-79274cd7199b_9,,,Modular and portable buildings with a planned <e1>fittings</e1> of more than <e2>24 degrees Celsius</e2> at a single location should be shown to comply with the energy efficiency requirements.,greater,synthetic
+9fd15b82-fc32-4364-8724-f1ef14f0c047,The cooker hood should span at least the full width of the cooker.,{'ID': '36_UK_DocF_V1_Ventilation'},The <e1>cooker hood</e1> should <e2>span</e2> at least the full width of the cooker.,part-of,annotated
+d728a9c8-0302-4bd1-b69b-0daeefce30d1,"Where a service building has a reception or sales counter, there should be convenient access to it and part of it should be at a level suitable for a wheelchair user or a seated person.",{'ID': '84_UK_DocM_V2_AccessAndUseOfBuildings'},"Where a <e1>service building</e1> has a reception or <e2>sales counter</e2>, there should be convenient access to it and part of it should be at a level suitable for a wheelchair user or a seated person.",part-of,annotated
+f3bd99b4-7ea5-4968-af10-3c133c0b5aa0_8,,,"No individual flight has a <e1>access</e1> of more than <e2>1,200 MJ/m2</e2>.",less-equal,synthetic
+9c9a27b6-b4be-4946-854a-c46ee812140c,"In general, accessible bedrooms should be no less advantageously situated than other bedrooms.",{'ID': '142_UK_DocM_V2_AccessAndUseOfBuildings'},"In general, accessible <e1>bedrooms</e1> should be <e2>no less advantageously situated than other bedrooms</e2>.",necessity,annotated
+8efb6108-e49e-4d64-a1e4-22e3f9128b17_8,,,"When calculating the reference heat loss of a building, the value of <e1>1</e1> shall be used as the <e2>dwelling primary energy rate</e2> for the air leakage rate figure for the building envelope.",equal,synthetic
+aa41a5d4-c0b1-4da7-84a0-5c2e2738654f_4,,,The total number of ventilators installed in the dwellings habitable rooms and kitchens should be at least the following: Five ventilators if the dwelling has more than <e1>180kW</e1> <e2>duct</e2>.,greater,synthetic
+4fc3b5b1-a838-4429-b385-d8e80e6633eb_0,,,"In the absence of relevant harmonised European Standards, products with a <e1>cross fall</e1> exceeding <e2>650mm</e2> must have a product certificate issued by a Notified Body.",greater,synthetic
+cea6e7bd-c494-4146-9f81-3fd2ed64a2a6_2,,,The <e1>clear width</e1> of the floor surface in the seating area and access route may not exceed <e2>190 kN</e2>.,less-equal,synthetic
+26980508-105c-49db-8595-bf001a48d757_9,,,"In <e1>copy</e1> with no fixed seats or <e2>waste</e2>, the number of persons shall be calculated to be two persons per square metre.",not-part-of,synthetic
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_7,,,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and <e1>150m2</e1> in <e2>flow rate</e2>; however, the sum of these must be at least 1,500 millimetres.",greater-equal,synthetic
+0365837b-a04d-4aaf-a2f5-2e89403a9c2b,"If all the terminals have to be set to a significantly closed position to achieve the required air flow rate, then the fan speed should be reduced and the terminals rebalanced.",{'ID': '200_UK_DocF_V1_Ventilation'},"If all the <e1>terminals</e1> have to be set to a significantly closed position to achieve the required air flow rate, then the fan speed should be reduced and the <e2>terminals</e2> rebalanced.",none,annotated
+e32bbb47-c826-40c1-8ea4-8c32353d3fd2_0,,,There shall be <e1>0.1m2</e1> of <e2>technical utility room</e2> provided for people in the building.,equal,synthetic
+5e51b653-449e-4d00-be19-0e20ecff5c49_11,,,The default <e1>design solar load</e1> should be <e2>800 millimetres</e2>.,equal,synthetic
+5ca6b3d3-fd21-4cc1-8dd8-185268db6615,The doorset should be manufactured from solid or laminated timber with a minimum density of 600kg/m3.,{'ID': '26_UK_DocQ_Security_Dwellings'},The doorset should be manufactured from solid or laminated <e1>timber</e1> with a minimum density of <e2>600kg/m3</e2>.,none,annotated
+72d7716f-7e3e-442c-9e42-14d4b19e18e3_1,,,A <e1>detailing</e1> that is being connected to a new building should not have a <e2>difference in light reflectance value</e2> for delivered heat to the building which is greater than 0.350kgCO2/kWh.,not-part-of,synthetic
+ddc0bba6-2df8-43e1-9398-37514366fb06,"For fixed terminals with automatic flow adjustment at the fan unit, the fan speed should be set to achieve the desired continuous flow rate.",{'ID': '208_UK_DocF_V1_Ventilation'},"For fixed <e1>terminals</e1> with automatic flow adjustment at the <e2>fan unit</e2>, the fan speed should be set to achieve the desired continuous flow rate.",part-of,annotated
+74b9ee2c-0192-442d-b5a1-a2974d456429,"The dwelling is wheelchair adaptable such that key parts of the accommodation, including sanitary facilities and kitchens, could be easily altered to meet the needs of a wheelchair user or, where required by a local planning authority, the dwelling is wheelchair accessible.",{'ID': '67_UK_DocM_V1_AccessAndUseOfBuildings'},"The <e1>dwelling</e1> is wheelchair adaptable such that key parts of the accommodation, including <e2>sanitary facilities</e2> and kitchens, could be easily altered to meet the needs of a wheelchair user or, where required by a local planning authority, the dwelling is wheelchair accessible.",none,annotated
+7f49ccb1-ce2c-47eb-8b22-2c8e806e5d88,The resilient layer should be to the full height of the door and 600mm either side of the doorset.,{'ID': '15_UK_DocQ_Security_Dwellings'},The resilient layer should be to the full height of the door and <e1>600mm</e1> <e2>either side</e2> of the doorset.,equal,annotated
+ad30824c-74be-4f4f-916a-dfe1e0a89205,"It should be noted that double buggies are wider than wheelchairs and that, where relevant to the building type, this should be borne in mind when determining an appropriate effective clear width for an entrance door.",{'ID': '67_UK_DocM_V2_AccessAndUseOfBuildings'},"It should be noted that <e1>double buggies</e1> are <e2>wider than wheelchairs</e2> and that, where relevant to the building type, this should be borne in mind when determining an appropriate effective clear width for an entrance door.",selection,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",{'ID': '83_Finnish_SafetyOfUse'},"The free opening of the vertical hatch or <e1>window</e1> of an <e2>emergency exit</e2> must be at least 600 millimetres in height and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",part-of,annotated
+9415ae4b-7a74-4c70-a245-e4381c6d71bf_2,,,"At gables and party walls, insulation should extend to the wall; if the <e1>air flow</e1> between the wall and joist is less than <e2>four</e2>, perimeter insulation may be required.",less,synthetic
+bf798097-bb99-42d0-a73f-8cebab8fbeb8_10,,,"In the entrance halls and other indoor areas of administrative, service and business premises and in assembly areas, the <e1>horizontal spacing</e1> of the steps must be no more than <e2>300mm</e2> and the tread must be no less than 300 millimetres.",less-equal,synthetic
+5869233a-4fc0-48bf-9007-2b0c9a169fef,"A building shall, if its size, number of storeys or an intended purpose of a premises within the building so requires, be divided into fire compartments in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",{'ID': '100_Finnish_FireSafety'},"A <e1>building</e1> shall, if its size, number of storeys or an <e2>intended purpose</e2> of a premises within the building so requires, be divided into fire compartments in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",none,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_11,,,"If the air flows of extract air categories 1 and 2 are combined into the same duct and <e1>water temperature</e1> <e2>one</e2> air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+75c60084-6878-472d-8694-e8739e0dd76c,The width of access routes in assembly areas with a maximum capacity of 60 persons must be at least 900 millimetres.,{'ID': '115_Finnish_SafetyOfUse'},The width of access routes in <e1>assembly areas</e1> with a <e2>maximum capacity</e2> of 60 persons must be at least 900 millimetres.,part-of,annotated
+a4dc06ab-99c3-4c8b-b295-eb3e6a64320a,"The free height from the ground or from the surface of a driveway or walkway of the lower edge of a structural element, device or equipment protruding from the building, such as a balcony, bay window, sign, lighting device or awning, must be at least 2.2 metres, unless the area is protected so as to prevent the danger of collision.",{'ID': '99_Finnish_SafetyOfUse'},"The free height from the ground or from the surface of a driveway or walkway of the lower edge of a structural element, device or equipment protruding from the building, such as a balcony, bay window, sign, lighting device or awning, must be at least 2.2 metres, unless the <e1>area</e1> is <e2>protected so as to prevent the danger of collision</e2>.",selection,annotated
+0cfe8c0e-45e4-4c4c-bf9b-906e26e28c75,"There should be sufficient space for people to approach the building, pass others who are travelling in the opposite direction and carry out all necessary manoeuvres.",{'ID': '43_UK_DocM_V2_AccessAndUseOfBuildings'},"There should be <e1>sufficient</e1> space for people to approach the building, <e2>pass others who are travelling in the opposite direction</e2> and carry out all necessary manoeuvres.",none,annotated
+d925c189-860a-4fcb-ae88-d1cf8cc14fb8_8,,,"The tread of steps in covered or heated outdoor staircases must be no less than 300 millimetres, and the <e1>efficiency</e1> may be no more than <e2>0.3W/m2</e2>.",less-equal,synthetic
+90b450dc-e913-48b3-bd17-dbac5b6fb057,The separator devices shall be located so that they can be serviced and emptied easily and without causing problems.,{'ID': '153_Finnish_Health-WaterAndSewerage'},The <e1>separator devices</e1> shall be <e2>located so that they can be serviced and emptied easily and without causing problems</e2>.,necessity,annotated
+009e12eb-db83-485c-9ffc-e1f462251109_9,,,Each air terminal should have a <e1>premises</e1> of at least <e2>twice the rise plus the going (2R G)</e2> of the free area of its associated duct.,greater-equal,synthetic
+536b172d-ccd1-479a-8136-6ee05db0f264,"Where pipework is above ground, the performance of the pipe insulation should be at least as high as the insulating performance of pipework in the buried part of the system.",{'ID': '205_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where <e1>pipework</e1> is above ground, the performance of the pipe <e2>insulation</e2> should be at least as high as the insulating performance of pipework in the buried part of the system.",none,annotated
+5ba5ffe7-ece8-488a-b461-da66237e7888,"All walls, ducts and boxings to the WC/cloakroom, bathroom and shower room should be strong enough to support grab rails, seats and other adaptations that could impose a load of up to 1.5kN/m2.",{'ID': '54_UK_DocM_V1_AccessAndUseOfBuildings'},"All walls, ducts and <e1>boxings</e1> to the WC/cloakroom, bathroom and <e2>shower room</e2> should be strong enough to support grab rails, seats and other adaptations that could impose a load of up to 1.5kN/m2.",part-of,annotated
+e1f1aeb9-7453-4b6b-b3f1-6049d711868a,The fire performance of the external wall structure of a building no more than 56 metres in height may also be demonstrated by a fullscale test.,{'ID': '156_Finnish_FireSafety'},The fire performance of the external <e1>wall structure</e1> of a building no more than 56 metres in height may also be <e2>demonstrated by a fullscale test</e2>.,none,annotated
+a4fccc69-c508-4405-92aa-2cfe36bfca39,Exits of parts of the building separated by a fire wall must be constructed separately so that in the event of a fire there is no need to use any door that may be in the fire wall.,{'ID': '209_Finnish_FireSafety'},Exits of <e1>parts</e1> of the building <e2>separated by a fire wall</e2> must be constructed separately so that in the event of a fire there is no need to use any door that may be in the fire wall.,selection,annotated
+5b4380ba-0066-4735-a362-316d4c8e70b2_6,,,"Where a building undergoing major renovation, which is not a residential building or a mixeduse building, will have more than <e1>2m</e1> <e2>plot</e2> after the major renovation is completed (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.",greater,synthetic
+9415ae4b-7a74-4c70-a245-e4381c6d71bf_7,,,"At gables and party walls, insulation should extend to the wall; if the <e1>Wall</e1> between the wall and joist is less than <e2>2.0 m3/(h m2)</e2>, perimeter insulation may be required.",less,synthetic
+66b3628a-f0ee-4bc7-93c8-2ae0145a2e78_3,,,"In a <e1>requirement</e1> with no openable <e2>Intermittent extract fans</e2>, an intermittent extract fan should be provided with controls which continue to operate the fan for at least 15 minutes after the room is vacated.",not-part-of,synthetic
+a0c838b5-5fe2-4b52-abe1-432804c2c8aa_7,,,A <e1>energy savings</e1> of 21 C shall be used as the <e2>total useful floor area</e2> for room temperature during the heating season.,equal,synthetic
+f1898d1c-5d14-4f9b-8c31-e0ac7623a61c,The building control body should be provided with a report that demonstrates that the residential building passes CIBSEs TM59 assessment of overheating.,{'ID': '47_UK_DocO_Overheating'},The <e1>building control body</e1> should be provided with a <e2>report</e2> that demonstrates that the residential building passes CIBSEs TM59 assessment of overheating.,necessity,annotated
+197b9463-397e-4729-a08d-12739f9db069,"For variable refrigerant flow (VRF) systems, any calculations must include indoor and outdoor conditions, the power input from controls, and indoor units.",{'ID': '283_UK_DocM_V2_AccessAndUseOfBuildings'},"For variable refrigerant flow (VRF) systems, any <e1>calculations</e1> must include <e2>indoor and outdoor conditions</e2>, the power input from controls, and indoor units.",necessity,annotated
+354c849e-8e02-47ec-992c-e5431a62cb3f,Ventilation systems that provide supply and extract ventilation should be fitted with a heat recovery system where technically feasible.,{'ID': '309_UK_DocM_V2_AccessAndUseOfBuildings'},Ventilation systems <e1>that provide supply and extract ventilation</e1> should be <e2>fitted with a heat recovery system where technically feasible</e2>.,none,annotated
+3ca5cb38-b90b-4449-ba14-4268866df8e1_4,,,The water heater is close to the draw-off points and has a <e1>Manual control</e1> no greater than <e2>2.2 metres</e2>.,less-equal,synthetic
+4ee66fa0-9dcc-4332-b001-f1aec49d9af9,It should be recognised that there is the danger where adjacent spaces each have an induction loop system that the signals may overlap.,{'ID': '154_UK_DocM_V2_AccessAndUseOfBuildings'},It should be recognised that there is the danger where adjacent spaces each have an <e1>induction loop system</e1> that <e2>the signals may overlap</e2>.,selection,annotated
+9691451a-57d5-484f-a346-0f83b59f7ae0,"Refreshment facilities, such as restaurants and bars, should be designed so that they can be reached and used by all people independently or with companions.",{'ID': '137_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Refreshment facilities</e1>, such as restaurants and <e2>bars</e2>, should be designed so that they can be reached and used by all people independently or with companions.",selection,annotated
+ef561e39-db90-462c-8dde-15fbeae954e5,A cube with edges of no more than 200 millimetres may pass between the upper edge of the barrier and the protective part.,{'ID': '50_Finnish_SafetyOfUse'},A cube with edges of no more than <e1>200 millimetres</e1> may <e2>pass between the upper edge of the barrier and the protective part</e2>.,none,annotated
+9618a274-45da-4e3e-87f0-21c2bfae4a8e_0,,,"A guardrail must be used at points with a <e1>dwelling primary energy rate</e1> of over <e2>280mm</e2>, if these can be accessed by children.",greater,synthetic
+113b8bf8-1856-45f5-a54b-d65ef100b437,"If a gas-fired combination boiler is installed in an existing dwelling, at least one of the following energy efficiency measures, appropriate to the system, should be installed.",{'ID': '262_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If a gas-fired combination boiler is installed in an existing dwelling, at least one of the <e1>following</e1> <e2>energy efficiency measures</e2>, appropriate to the system, should be installed.",selection,annotated
+35af73f1-53c7-4377-9da0-acf99eef4d8e,"WC compartment doors, and doors to wheelchair-accessible unisex toilets, changing rooms or shower rooms have an emergency release mechanism so that they are capable of being opened outwards, from the outside , in case of emergency.",{'ID': '159_UK_DocM_V2_AccessAndUseOfBuildings'},"WC compartment doors, and <e1>doors</e1> to wheelchair-accessible unisex toilets, changing rooms or shower rooms <e2>have an emergency release mechanism so that they are capable of being opened outwards, from the outside , in case of emergency</e2>.",necessity,annotated
+d0b6759e-deec-451d-bd7a-ec65b96048be_2,,,"extract air of <e1>above</e1> <e2>850 millimetres</e2> shall be conducted through individual ducts, or common ducts serving spaces of the same type as regards level of air purity, to the outdoors, into a collection duct installed above the spaces it serves or into an extract air chamber.",equal,synthetic
+09b2a395-5293-4b7d-82d4-5312482d59e9,"Door entry controls, where provided, are mounted 900-1000mm above finished ground level, and at least 300mm away from any projecting corner.",{'ID': '46_UK_DocM_V1_AccessAndUseOfBuildings'},"Door entry controls, where provided, are mounted <e1>900-1000mm</e1> above finished ground level, and at least 300mm <e2>away</e2> from any projecting corner.",none,annotated
+f72a98f3-b7d2-4633-b244-0d7242dfb0c9_0,,,Every single bedroom has a minimum <e1>emission rate</e1> of <e2>0.052083333</e2> and is at least 2.4m wide.,greater-equal,synthetic
+76acc6bd-50c0-4f3f-b015-42e171ec6ce7_3,,,<e1>(16.66 8.33 V0.4)/(1000 24)</e1> <e2>living area</e2> must be installed.,equal,synthetic
+f050b9bc-ce9e-4e51-8291-bbabda986732,all dimensions are minimum except where noted.,{'ID': '88_UK_DocM_V1_AccessAndUseOfBuildings'},<e1>all dimensions</e1> are <e2>minimum except where noted</e2>.,necessity,annotated
+7d552257-2212-4139-8d13-b982e0e7744f,"It would be beneficial if entrance doors to wheelchair-accessible bedrooms were powered opening, as this could avoid the need for the 300mm access space adjacent to the leading edge of the door.",{'ID': '143_UK_DocM_V2_AccessAndUseOfBuildings'},"It would be beneficial if entrance doors to <e1>wheelchair-accessible</e1> <e2>bedrooms</e2> were powered opening, as this could avoid the need for the 300mm access space adjacent to the leading edge of the door.",selection,annotated
+f1b9829d-7ac3-4bc5-918a-5bbb8d663a35,"For space heating systems, temperature control should be installed for the heating appliance.",{'ID': '248_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For space heating systems, <e1>temperature control</e1> should be <e2>installed for the heating appliance</e2>.",necessity,annotated
+825053cb-af5d-43a9-b59b-e2a5ae78ea73,The total number of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the number of dwellings in the residential building; b. the number of associated parking spaces.,{'ID': '59_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},The total number of <e1>associated</e1> <e2>parking spaces</e2> which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the number of dwellings in the residential building; b. the number of associated parking spaces.,selection,annotated
+9dd51871-3235-4bbe-abdc-ab8d6dd3b1e6,"For example, the shutters should be used in the day and the windows opened only when it is cooler outside.",{'ID': '96_UK_DocO_Overheating'},"For example, the <e1>shutters</e1> should be <e2>used in the day and the windows opened only when it is cooler outside</e2>.",necessity,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479_8,,,Individual flights are: for gradients up to 1:15 not more than 10m long; for gradients up to 1:12 not more than <e1>400kg</e1> <e2>intended purpose</e2>.,less-equal,synthetic
+53e31e26-a39b-4047-a86e-bdb8021413e8_0,,,Window handles on windows that open outwards are not more than <e1>twice the rise plus the going (2R G)</e1> <e2>standard thickness</e2> when the window is at its maximum openable angle.,less-equal,synthetic
+113b8bf8-1856-45f5-a54b-d65ef100b437,"If a gas-fired combination boiler is installed in an existing dwelling, at least one of the following energy efficiency measures, appropriate to the system, should be installed.",{'ID': '262_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If a gas-fired combination boiler is installed in an <e1>existing</e1> <e2>dwelling</e2>, at least one of the following energy efficiency measures, appropriate to the system, should be installed.",selection,annotated
+cea6e7bd-c494-4146-9f81-3fd2ed64a2a6_10,,,The <e1>flow rate</e1> of the floor surface in the seating area and access route may not exceed <e2>EI 30</e2>.,less-equal,synthetic
+63af9f99-6939-4e8c-a6a9-8b10942e1597_3,,,"The handle to at least <e1>4</e1> <e2>gangways</e2> in the principal living area is located between 450mm and 1200mm above floor level, unless the window is fitted with a remote opening device that is within this height range.",greater-equal,synthetic
+6ec243f2-9294-4b7c-89a4-1c46e4a69cc9,"If site constraints necessitate an approach of 1:20 or steeper, an approach incorporating ramped access should be provided.",{'ID': '49_UK_DocM_V2_AccessAndUseOfBuildings'},"If <e1>site</e1> <e2>constraints</e2> necessitate an approach of 1:20 or steeper, an approach incorporating ramped access should be provided.",part-of,annotated
+3f7c10d1-d801-4351-bc85-187cf8cffeb3,The water vapour resistance and air tightness of external walls and their various layers as well as the structures attached to the external wall and joints to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,{'ID': '96_Finnish_Health-Humidity'},The <e1>water vapour resistance</e1> and air tightness of external walls and their various <e2>layers</e2> as well as the structures attached to the external wall and joints to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,part-of,annotated
+26980508-105c-49db-8595-bf001a48d757,"In rooms with no fixed seats or furnishings, the number of persons shall be calculated to be two persons per square metre.",{'ID': '103_Finnish_SafetyOfUse'},"In <e1>rooms</e1> with no fixed <e2>seats</e2> or furnishings, the number of persons shall be calculated to be two persons per square metre.",not-part-of,annotated
+7f3f59a4-fc7e-4b14-8074-384f6cacf548_5,,,"The height of a barrier in a dwellings indoor areas may, however, be at least 0.9 metres if the <e1>proportion of the cooling load relating to distribution pipework</e1> is less than <e2>10m</e2>.",less,synthetic
+87c9cfa3-8093-497d-be10-dc054abe7062,"For common leaf lintels, the base plate should not be continuous and the lintel core should be insulated.",{'ID': '164_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For common leaf lintels, the <e1>base plate</e1> should <e2>not be continuous</e2> and the lintel core should be insulated.",necessity,annotated
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c_9,,,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be <e1>area</e1> <e2>220 millimetres</e2>.",equal,synthetic
+53e31e26-a39b-4047-a86e-bdb8021413e8,Window handles on windows that open outwards are not more than 650mm from the inside face of the wall when the window is at its maximum openable angle.,{'ID': '84_UK_DocO_Overheating'},<e1>Window handles</e1> on windows that open outwards are not more than <e2>650mm</e2> from the inside face of the wall when the window is at its maximum openable angle.,none,annotated
+4d80c4d1-08ee-481a-9f9c-e9151ce1094d,"The area of windows, roof windows, rooflights and doors should not exceed 25 of the total floor area of the dwelling.",{'ID': '421_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The <e1>area</e1> of windows, roof windows, rooflights and doors should not exceed 25 of the <e2>total floor area</e2> of the dwelling.",none,annotated
+0da52584-1b37-48b5-840f-3795ae695275,the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,{'ID': '119_UK_DocM_V2_AccessAndUseOfBuildings'},the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where <e1>provision</e1> is <e2>being made for an accompanied wheelchair user</e2>.,selection,annotated
+956efc87-87de-4d3c-99fb-dc58eab9353b,"A  dwelling  that  is  intended  for  sheltered  housing  or  supported  housing  of  a  person  with mobility or functional impairment shall have at least one toilet and washing facility which has a  free  space  with  a  diameter  of  at  least  1,500  millimetres.",{'ID': '42_Finnish_Accessibility'},"A <e1>dwelling</e1> that is intended for sheltered housing or supported housing of a person with mobility or functional impairment shall have at least one <e2>toilet and washing facility</e2> which has a free space with a diameter of at least 1,500 millimetres.",necessity,annotated
+cea6e7bd-c494-4146-9f81-3fd2ed64a2a6_6,,,"The <e1>gradients</e1> of the floor surface in the seating area and access route may not exceed <e2>1,500  millimetres</e2>.",less-equal,synthetic
+53bb982d-5260-4a69-a6dd-71e4f074e676_5,,,The <e1>intended purpose</e1> of standing rows must be at least <e2>450mm</e2>.,greater-equal,synthetic
+51550284-0701-41b2-9a76-a0061d16938a,"Windows and doors: to ensure continuity of the air barrier, window and door units should connect to the primary air barrier and window and door frames should be taped to surrounding structural openings, using air sealing tape.",{'ID': '188_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Windows and <e1>doors</e1>: to ensure continuity of the air barrier, window and door units should connect to the primary air barrier and <e2>window and door frames</e2> should be taped to surrounding structural openings, using air sealing tape.",none,annotated
+adc0ce58-8e7e-42fa-a823-ab45f266f77f,Sewers shall be connected to a stack vent that extends above the roofing of a building.,{'ID': '135_Finnish_Health-WaterAndSewerage'},Sewers shall be connected to a <e1>stack vent</e1> that <e2>extends above the roofing of a building</e2>.,selection,annotated
+7e34700e-92de-4b00-a820-f4085a2e186c_11,,,"If the <e1>axle group load</e1> between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than <e2>30% load</e2>, the wall in question must be class EI 15.",less,synthetic
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3_4,,,"Where the <e1>sum</e1> of installing only cable routes is more than <e2>0.35W/(m2K)</e2> of the total cost of the major renovation, there is no requirement to install either electric vehicle charge points or cable routes.",greater,synthetic
+536b172d-ccd1-479a-8136-6ee05db0f264_0,,,"Where pipework is above ground, the performance of the pipe <e1>properties</e1> should be at least as high as the <e2>effective rated output</e2> of pipework in the buried part of the system.",greater-equal,synthetic
+4e4fdf56-c45b-4d89-b18f-7a2f24a41ba9,"In spaces intended for more than 60 persons, the width of the access route must be at least 1,200 millimetres.",{'ID': '116_Finnish_SafetyOfUse'},"In spaces intended for more than 60 persons, the <e1>width</e1> of the <e2>access route</e2> must be at least 1,200 millimetres.",part-of,annotated
+01008f69-874b-443e-bcb2-2f5630280049_4,,,"If stairs are used only as an emergency exit and if they lead to spaces in a dwelling or accommodation facility other than those that are necessary for living, the <e1>thick</e1> may be no more than <e2>15 degrees</e2> and the tread must be no less than 220 millimetres.",less-equal,synthetic
+793cb939-b3d9-46eb-ae65-71a4d5c8031b,Where the parking is within the private curtilage of the dwelling (but not within a carport or garage) at least one space is a standard parking bay that can be widened to 3.3m.,{'ID': '43_UK_DocM_V1_AccessAndUseOfBuildings'},Where the parking is within the private curtilage of the dwelling (but not within a carport or <e1>garage</e1>) at least one space is a standard parking bay that can be widened to <e2>3.3m</e2>.,none,annotated
+f3bd99b4-7ea5-4968-af10-3c133c0b5aa0_3,,,No individual flight has a <e1>Leakage</e1> of more than <e2>200 lux</e2>.,less-equal,synthetic
+bb9ec292-062b-43c3-8590-856dd5f6b890_11,,,"The building primary energy rate and <e1>illuminance</e1> calculated using the measured air permeability must not be higher than the target primary energy rate and <e2>total flow rate</e2>, respectively.",less-equal,synthetic
+636bce88-fd3b-4e5a-9f6a-4aa0d3d1bfa4,"Where a new building contains more than one dwelling, a common access point for a gigabit-capable public electronic communications network is required as a part of the buildings gigabit-ready physical infrastructure.",{'ID': '6_UK_DocR_V1_InfrastructureForElectircalCommunications'},"Where a new building contains more than <e1>one</e1> <e2>dwelling</e2>, a common access point for a gigabit-capable public electronic communications network is required as a part of the buildings gigabit-ready physical infrastructure.",greater,annotated
+a090f6bb-f89b-44c1-b6ee-8e72e2be30a0,Where a system for on-site electricity generation is installed (a) reasonable provision must be made to ensure that (i) the system and its electrical output are appropriately sized for the site and available infrastructure; (ii) the system has effective controls; and (b) it must be commissioned by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.,{'ID': '370_UK_DocM_V2_AccessAndUseOfBuildings'},Where a system for on-site electricity generation is installed (a) <e1>reasonable</e1> provision must be made to ensure that (i) the system and its electrical output are appropriately sized for the site and available infrastructure; (ii) the system has <e2>effective controls</e2>; and (b) it must be commissioned by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.,none,annotated
+8207751f-13b8-4fe3-9bfe-4423093d4905_2,,,A building with dwellings or accommodation or patient rooms shall be designed and implemented so that the <e1>service life</e1> of the staircase and exit route is no more than <e2>2 metres</e2>.,less-equal,synthetic
+8efb6108-e49e-4d64-a1e4-22e3f9128b17_11,,,"When calculating the reference heat loss of a building, the value of <e1>13l/s</e1> shall be used as the <e2>load</e2> for the air leakage rate figure for the building envelope.",equal,synthetic
+35cacecf-06dc-4b0f-aadb-db2ee05518c7_3,,,The area of windows and roof windows (but excluding display windows) <e1>suitable for their purpose</e1> exceeds <e2>10m</e2> of the facade area.,greater,synthetic
+d0b6759e-deec-451d-bd7a-ec65b96048be_0,,,"extract air of <e1>proportion</e1> <e2>0.06 m2</e2> shall be conducted through individual ducts, or common ducts serving spaces of the same type as regards level of air purity, to the outdoors, into a collection duct installed above the spaces it serves or into an extract air chamber.",equal,synthetic
+3724fd47-22f7-432c-81a2-1abcb95c7df2_7,,,"The total number of ventilators installed in a dwellings habitable rooms and kitchens should be no fewer than five, except in <e1>10m</e1> <e2>Staircases</e2> properties, where there should be no fewer than four.",equal,synthetic
+3153d771-404e-4a54-ac05-ed1b75e37506_3,,,"Gangways should not be less than 1100mm <e1>net absorber area</e1> unless used by not more than 50 persons, in which case gangways should be a minimum of <e2>200 m2</e2>.",greater-equal,synthetic
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the <e1>premises</e1> to be fitted with a floor drain shall be: 1. showers and bathrooms as well as <e2>wash rooms</e2> in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",necessity,annotated
+103f99ad-884b-4bae-9f22-ccb1c5bc3d26,"In an open garage of no more than five storeys, the maximum area may be used as the surface area of the storeys, even though the driveways between the various storeys are combined.",{'ID': '110_Finnish_FireSafety'},"In an open <e1>garage</e1> of no more than five <e2>storeys</e2>, the maximum area may be used as the surface area of the storeys, even though the driveways between the various storeys are combined.",part-of,annotated
+0cfe8c0e-45e4-4c4c-bf9b-906e26e28c75,"There should be sufficient space for people to approach the building, pass others who are travelling in the opposite direction and carry out all necessary manoeuvres.",{'ID': '43_UK_DocM_V2_AccessAndUseOfBuildings'},"There should be <e1>sufficient</e1> <e2>space</e2> for people to approach the building, pass others who are travelling in the opposite direction and carry out all necessary manoeuvres.",selection,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479_8,,,Individual flights are: for <e1>Capacities</e1> up to <e2>23C</e2> not more than 10m long; for gradients up to 1:12 not more than 5m long.,less-equal,synthetic
+dae0db09-fd4b-4f2c-99c0-cd742b19d17a,"A glass structure or other light-permeable structure, along with its mountings, must withstand the load to which it is normally subject, unless the structure is protected by a fixed collision barrier.",{'ID': '68_Finnish_SafetyOfUse'},"A glass structure or other light-permeable structure, along with <e1>its</e1> <e2>mountings</e2>, must withstand the load to which it is normally subject, unless the structure is protected by a fixed collision barrier.",part-of,annotated
+2ff58135-b89d-40d1-a145-51aad9e5a942,"The landing in front of the outside door shall be at least 1,500 millimetres wide and at least 1,500 millimetres long.",{'ID': '16_Finnish_Accessibility'},"The <e1>landing</e1> in front of the outside door shall be at least 1,500 millimetres <e2>wide</e2> and at least 1,500 millimetres long.",part-of,annotated
+8e9ef8dc-18bd-4877-98cd-556aa4adee8f,"Reasonable provision shall be made for the conservation of fuel and power in buildings by: (a) limiting heat gains and losses (i) through thermal elements and other parts of the building fabric; and (ii) from pipes, ducts and vessels used for space heating, space cooling and hot water services; (b) providing fixed building services which (i) are energy efficient to a reasonable standard; (ii) have effective controls; and (iii) are commissioned by testing and adjusting as necessary to ensure they use no more fuel and power than is reasonable in the circumstances.",{'ID': '431_UK_DocM_V2_AccessAndUseOfBuildings'},"Reasonable provision shall be made for the conservation of fuel and power in buildings by: (a) <e1>limiting heat gains and losses</e1> (i) through thermal elements and other parts of the building fabric; and (ii) <e2>from pipes, ducts and vessels used for space heating, space cooling and hot water services</e2>; (b) providing fixed building services which (i) are energy efficient to a reasonable standard; (ii) have effective controls; and (iii) are commissioned by testing and adjusting as necessary to ensure they use no more fuel and power than is reasonable in the circumstances.",selection,annotated
+1085a40e-a3d6-48e2-85ac-8247a26f04f2,Mechanical ventilation systems must be commissioned in accordance with an approved procedure.,{'ID': '35_UK_DocF_V2_Ventilation'},<e1>Mechanical</e1> <e2>ventilation systems</e2> must be commissioned in accordance with an approved procedure.,selection,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479_0,,,Individual flights are: for gradients up to 1:15 not more than <e1>half</e1> <e2>widened</e2>; for gradients up to 1:12 not more than 5m long.,less-equal,synthetic
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_9,,,"If the air flows of <e1>maintained</e1> 1 and <e2>10</e2> are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+bde1697a-20c9-4f15-a63c-5be323a058c1_5,,,Any connection of <e1>10 litres per second per person</e1> or more <e2>entrance door</e2> to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,greater-equal,synthetic
+0df5892a-e396-424e-90f1-74f6ccfb9e1a,"A certain proportion of the changing rooms, washing facilities, saunas and swimming pools in a non-residential building shall be suitable for a person with mobility and functional impairment.",{'ID': '61_Finnish_Accessibility'},"A <e1>certain proportion</e1> of the changing rooms, <e2>washing facilities</e2>, saunas and swimming pools in a non-residential building shall be suitable for a person with mobility and functional impairment.",part-of,annotated
+2f0f22aa-06d3-478d-a777-5aca5c2fb5c1,"For sliding doors and gates, provide both of the following: (i) a stop or other effective means to prevent them coming off the end of the track; (ii) a retaining rail to prevent doors and gates falling if the suspension system fails or the rollers leave the track.",{'ID': '120_UK_DocK_ProtectionFromFalling'},"For sliding doors and gates, provide both of the following: (i) a stop or other effective means <e1>to prevent them coming off the end of the track</e1>; (ii) a retaining rail <e2>to prevent doors and gates falling if the suspension system fails or the rollers leave the track</e2>.",none,annotated
+371e1755-8bb5-456e-bf66-5a50f4c19d59,"Where there is full-height structural guarding, if you provide a second (lower) handrail, the vertical height from the pitch line of the steps (or the surface of the ramp) to the top of the second (lower) handrail should be 600mm.",{'ID': '50_UK_DocK_ProtectionFromFalling'},"Where there is full-height structural guarding, if you provide a second (lower) handrail, the vertical <e1>height</e1> <e2>from the pitch line of the steps (or the surface of the ramp) to the top of the second (lower) handrail</e2> should be 600mm.",selection,annotated
+fa8a6d84-eb99-490e-8169-3c65353fb553,"For large roofs, where the smaller horizontal dimension of the roof is 50 m or more, and the topography is windswept, the value of the exposure coefficient shall be at least 1.",{'ID': '61_Finnish_StabilityOfStructures'},"For <e1>large</e1> roofs, where the smaller horizontal dimension of the roof is 50 m or more, and the <e2>topography</e2> is windswept, the value of the exposure coefficient shall be at least 1.",none,annotated
+63af9f99-6939-4e8c-a6a9-8b10942e1597,"The handle to at least one window in the principal living area is located between 450mm and 1200mm above floor level, unless the window is fitted with a remote opening device that is within this height range.",{'ID': '57_UK_DocM_V1_AccessAndUseOfBuildings'},"The <e1>handle</e1> to at least one <e2>window</e2> in the principal living area is located between 450mm and 1200mm above floor level, unless the window is fitted with a remote opening device that is within this height range.",part-of,annotated
+1913381b-a2cc-496e-9168-82ccf2a01d50_9,,,"In connection with repair and alteration work, the heat emitters connected to the domestic hot water ring duct may be replaced so that the <e1>manufacturers declared efficiencies</e1> of the heat emitters to be installed does not exceed <e2>1.501kWhPE/kWh</e2>.",less-equal,synthetic
+2fad9e0f-fa0d-4a6b-9c63-152ef8828c4d_8,,,An upstand built on site should not exceed a <e1>energy efficiency</e1> of <e2>0.3</e2>.,less-equal,synthetic
+3c28dbd6-8a3d-4ede-ae08-89e4b5d69d60_0,,,The approach route is a minimum of 900mm wide with a maximum <e1>outputs</e1> of <e2>2 metres</e2>.,less-equal,synthetic
+3c28dbd6-8a3d-4ede-ae08-89e4b5d69d60_1,,,The approach route is a minimum of 900mm wide with a maximum <e1>maximum number of occupants</e1> of <e2>180 millimetres</e2>.,less-equal,synthetic
+7e34700e-92de-4b00-a820-f4085a2e186c,"If the free gap between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than 2 metres, the wall in question must be class EI 15.",{'ID': '135_Finnish_FireSafety'},"If the <e1>free gap</e1> <e2>between facing walls of adjacent glazed balconies</e2> or the distance of the wall to the window of an adjacent fire compartment is less than 2 metres, the wall in question must be class EI 15.",selection,annotated
+9fd15b82-fc32-4364-8724-f1ef14f0c047_4,,,The cooker hood should <e1>total useful floor area</e1> at least the <e2>absence</e2> of the cooker.,greater-equal,synthetic
+bc5a76fa-f0ec-47d5-b8e3-0e9458f3f140,"Foundations: wherever possible, blocks below the damp-proof course should be the same as those specified in the design for the above-ground main wall element (in masonry construction).",{'ID': '159_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Foundations: wherever possible, <e1>blocks</e1> <e2>below the damp-proof course</e2> should be the same as those specified in the design for the above-ground main wall element (in masonry construction).",selection,annotated
+c90714e3-d8f9-47dc-ac9c-2e7ee516a89c,The joint between waterproofing and the floor drain must be tight.,{'ID': '119_Finnish_Health-Humidity'},The <e1>joint</e1> <e2>between waterproofing and the floor drain</e2> must be tight.,selection,annotated
+29c431ee-ea93-491d-ab13-06418d93c488_7,,,"If <e1>dimension</e1> is greater than <e2>0.2</e2>, manual control is acceptable.",greater,synthetic
+d713514a-9398-45a2-9584-efecff6ebcc5,Reasonable provision must be made to resist unauthorised access to (a) any dwelling; and (b) any part of a building from which access can be gained to a flat within the building.,{'ID': '4_UK_DocQ_Security_Dwellings'},Reasonable provision must be made to resist unauthorised access to (a) any dwelling; and (b) any <e1>part</e1> of a <e2>building</e2> from which access can be gained to a flat within the building.,part-of,annotated
+37f01a2c-b944-45a2-a7f4-140d8c03d7ac,"After rebating, frame components should retain at least 32mm of timber.",{'ID': '29_UK_DocQ_Security_Dwellings'},"After rebating, frame components should retain at least <e1>32mm</e1> of <e2>timber</e2>.",greater-equal,annotated
+bde1697a-20c9-4f15-a63c-5be323a058c1,Any connection of two or more air handling units to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,{'ID': '90_Finnish_Health-IndoorClimateAndVentilation'},Any connection of <e1>two</e1> or more air handling units to the same duct or chamber shall be designed so that the <e2>pressures</e2> of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,none,annotated
+9494f4b9-aae0-4668-aebb-1d8851dd0824,"In refreshment facilities, bars and counters (or sections of them) should be at a level suitable for wheelchair users.",{'ID': '127_UK_DocM_V2_AccessAndUseOfBuildings'},"In refreshment facilities, <e1>bars and counters</e1> (or sections of them) should be <e2>at a level suitable for wheelchair users</e2>.",necessity,annotated
+fab95d95-4789-4384-8d57-a575190f9e73,The heating plant emission rate of the micro combined heat and power system (microCHP) should be no greater than the emission rate of a regular boiler using the same fuel as the microCHP.,{'ID': '297_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>heating plant emission rate</e1> of the <e2>micro combined heat and power system</e2> (microCHP) should be no greater than the emission rate of a regular boiler using the same fuel as the microCHP.,part-of,annotated
+e505b13c-7b62-4857-aa2d-544dc986e9c0,"For dwellings, for external tapered steps and stairs that are part of the building the going of each step should be a minimum of 280mm.",{'ID': '18_UK_DocK_ProtectionFromFalling'},"For dwellings, for external tapered steps and stairs that are part of the building the <e1>going</e1> of each <e2>step</e2> should be a minimum of 280mm.",part-of,annotated
+da4d5959-6e64-4e04-a1f3-8b42b6addab0_1,,,The outdoor <e1>number of wall ties per square metre</e1> used in the calculations for buildings other than those in intended use categories 1 and 2 outside the occupancy period shall be at least <e2>14 metres</e2>.,greater-equal,synthetic
+3153d771-404e-4a54-ac05-ed1b75e37506_6,,,"Gangways should not be less than <e1>20 points</e1> <e2>exceptional circumstances</e2> unless used by not more than 50 persons, in which case gangways should be a minimum of 900mm.",greater-equal,synthetic
+36650de0-ef3c-4fd1-8199-f47c0e576076,the rated speed of the platform does not exceed 0.15m/s.,{'ID': '183_UK_DocM_V2_AccessAndUseOfBuildings'},the <e1>rated speed</e1> of the platform does not exceed <e2>0.15m/s</e2>.,less-equal,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_6,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for <e1>U-value</e1> <e2>25</e2> and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",equal,synthetic
+8421f806-70f2-46a9-a308-90a40da3541d,"Where the gradient of the approach, whether over its whole length or in part, is 1:20 or steeper, that part of the approach should be designed as ramped access.",{'ID': '41_UK_DocM_V2_AccessAndUseOfBuildings'},"Where the <e1>gradient</e1> of the approach, whether <e2>over its whole length or in part</e2>, is 1:20 or steeper, that part of the approach should be designed as ramped access.",selection,annotated
+cf35d4a4-3170-421b-9be1-b68d928eed1d_9,,,"A roof with a <e1>thermal integrity</e1> greater than <e2>21 C</e2> must be constructed making appropriate use of walkways, roof ladders, safety ladders, roof stairs, roof treads and foot rails.",greater,synthetic
+9415ae4b-7a74-4c70-a245-e4381c6d71bf_9,,,"At gables and party walls, insulation should extend to the wall; if the <e1>Floors</e1> between the wall and joist is less than <e2>0.136kgCO2/kWh</e2>, perimeter insulation may be required.",less,synthetic
+ee0c8c7c-c65e-4403-92e6-628fd680f3bf,Any panel within the doorset should be at least 15mm thick.,{'ID': '30_UK_DocQ_Security_Dwellings'},Any panel within the doorset should be at least <e1>15mm</e1> <e2>thick</e2>.,greater-equal,annotated
+fb1da22f-8ddb-4399-b441-64dca68da9af_10,,,"If a lift or other device for moving between levels is installed in the exit of an existing building, the dwellings exit may be no less than <e1>25mm</e1> <e2>patterns</e2>.",greater-equal,synthetic
+13a437c0-918c-47f2-85bd-b80dd69eb027,"There are no limits on the design of display windows and similar glazing, but for new buildings their impact must be taken into account in the calculation of primary energy and CO2 emissions.",{'ID': '138_UK_DocM_V2_AccessAndUseOfBuildings'},"There are no limits on the design of display windows and <e1>similar</e1> <e2>glazing</e2>, but for new buildings their impact must be taken into account in the calculation of primary energy and CO2 emissions.",selection,annotated
+34a524ec-6994-426f-86af-78788fd34a80,"Between the locking points for the mortice lock and surface-mounted rim lock, the distance should be 400-600mm.",{'ID': '36_UK_DocQ_Security_Dwellings'},"Between the locking points for the mortice lock and <e1>surface-mounted</e1> <e2>rim lock</e2>, the distance should be 400-600mm.",selection,annotated
+2ff58135-b89d-40d1-a145-51aad9e5a942_10,,,"The landing in front of the outside door shall be at least <e1>between 550mm and 700mm</e1> <e2>floor  plate areas</e2> and at least 1,500 millimetres long.",greater-equal,synthetic
+2f8d4247-e53b-49ae-bd26-c4f1765eaee8_6,,,"Extract air of <e1>installed generation capacity</e1> <e2>500kW</e2>, 3 and 4 shall not be used as recirculation air.",equal,synthetic
+4fc3b5b1-a838-4429-b385-d8e80e6633eb_10,,,"In the absence of relevant harmonised European Standards, products with a <e1>domestic  hot  water cylinder heat loss</e1> exceeding <e2>0.1m2</e2> must have a product certificate issued by a Notified Body.",greater,synthetic
+3ec0e36a-0227-4b76-9fd5-7a2f77877d99,A building that contains both living accommodation and space for commercial purposes (e.g. for a workshop or office) should be treated as a dwelling if the commercial part can be reverted to domestic use.,{'ID': '23_UK_DocM_V2_AccessAndUseOfBuildings'},A <e1>building</e1> that contains both living accommodation and <e2>space</e2> for commercial purposes (e.g. for a workshop or office) should be treated as a dwelling if the commercial part can be reverted to domestic use.,part-of,annotated
+51f35d58-c411-4d6d-b36e-9ddf10199908,"Whatever lifting device is chosen, internal stairs should always be provided as an alternative means of vertical access, and designed to suit ambulant disabled people and those with impaired sight.",{'ID': '106_UK_DocM_V2_AccessAndUseOfBuildings'},"Whatever lifting device is chosen, <e1>internal stairs</e1> should always be provided as an alternative means of vertical access, and <e2>designed to suit ambulant disabled people and those with impaired sight</e2>.",necessity,annotated
+51517a5d-dd11-41b9-b44b-36d87b959127,The presence of the door should be apparent not only when it is shut but also when it is open.,{'ID': '77_UK_DocM_V2_AccessAndUseOfBuildings'},The <e1>presence</e1> of the door should be <e2>apparent</e2> not only when it is shut but also when it is open.,necessity,annotated
+fa8a6d84-eb99-490e-8169-3c65353fb553,"For large roofs, where the smaller horizontal dimension of the roof is 50 m or more, and the topography is windswept, the value of the exposure coefficient shall be at least 1.",{'ID': '61_Finnish_StabilityOfStructures'},"For large roofs, where the smaller horizontal <e1>dimension</e1> of the roof is <e2>50 m</e2> or more, and the topography is windswept, the value of the exposure coefficient shall be at least 1.",greater-equal,annotated
+079db365-cfed-474e-9329-25349ac0db4a_7,,,"In connection with the door of an outside space of an individual dwelling the <e1>air distribution</e1> outside the door may be more than <e2>230mm</e2> if the level difference can, with reasonable effort, be eliminated with equipment in the outdoor space.",greater,synthetic
+5e7d4831-4ec8-48f9-9e60-0422fcc1eae4,"When replacing an existing system, the installed generation capacity of the new system should be no less than that of the existing system, except where a smaller system can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",{'ID': '344_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When replacing an existing system, the <e1>installed generation capacity</e1> of the new system should be no less than <e2>that</e2> of the existing system, except where a smaller system can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",greater-equal,annotated
+5869233a-4fc0-48bf-9007-2b0c9a169fef,"A building shall, if its size, number of storeys or an intended purpose of a premises within the building so requires, be divided into fire compartments in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",{'ID': '100_Finnish_FireSafety'},"A building shall, if its size, number of storeys or an <e1>intended purpose</e1> of a premises within the building so requires, be <e2>divided into fire compartments</e2> in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",none,annotated
+33ed3038-99a6-4b2d-906a-a1db21f2d898,"For heating systems in new dwellings, or when a heat generator such as a boiler is replaced in an existing dwelling, each room should be provided with thermostatic room controls.",{'ID': '250_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For heating systems in new dwellings, or when a heat generator such as a boiler is replaced in an <e1>existing</e1> <e2>dwelling</e2>, each room should be provided with thermostatic room controls.",selection,annotated
+2d31da64-b8e0-40aa-a8f6-6ae601e5c0da,lifting platform controls are located between 800mm and 1100mm from the floor of the lifting platform and at least 400mm from any return wall.,{'ID': '184_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>lifting platform controls</e1> are <e2>located between 800mm and 1100mm from the floor of the lifting platform and at least 400mm from any return wall</e2>.,necessity,annotated
+208b093d-361f-4aec-819d-4abca4e72c68_6,,,"in an evacuation area where the <e1>number of occupants</e1> is <e2>two</e2>, the second exit may be no less than 900 millimetres in width.",equal,synthetic
+c06bb553-d8f1-47f5-ab33-cfdebb6bca52,"When a building undergoes a major renovation, the technical, environmental and economic feasibility of installing high-efficiency alternative systems should be considered.",{'ID': '117_UK_DocM_V2_AccessAndUseOfBuildings'},"When a <e1>building</e1> undergoes a major renovation, the technical, environmental and economic <e2>feasibility of installing high-efficiency alternative systems</e2> should be considered.",necessity,annotated
+7a1bc727-1daa-4668-83f6-b44327b96898,"In glazed balconies, the spread of fire from one balcony to another and to an adjacent fire compartment must be restricted.",{'ID': '133_Finnish_FireSafety'},"In glazed balconies, the <e1>spread of fire</e1> from one balcony to another and to an adjacent fire compartment must be <e2>restricted</e2>.",necessity,annotated
+3c28dbd6-8a3d-4ede-ae08-89e4b5d69d60_8,,,The approach route is a minimum of 900mm wide with a maximum <e1>load EER</e1> of <e2>16/01/2023 00:00</e2>.,less-equal,synthetic
+302c413e-fefd-47f1-914f-0dc787e4a761_2,,,"Where <e1>height</e1> on surfaces is greater than <e2>EI 15</e2>, a difference in light reflectance value should be a minimum of 20 points.",greater,synthetic
+079db365-cfed-474e-9329-25349ac0db4a,"In connection with the door of an outside space of an individual dwelling the level difference outside the door may be more than 20 millimetres if the level difference can, with reasonable effort, be eliminated with equipment in the outdoor space.",{'ID': '21_Finnish_Accessibility'},"In connection with the door of an outside space of an individual dwelling the level difference outside the door may be more than 20 millimetres if the <e1>level difference</e1> can, with reasonable effort, be <e2>eliminated with equipment in the outdoor space</e2>.",selection,annotated
+85745724-aa09-4cdd-ad17-3c50ea2b99a1,"Where sanitary facilities are wheelchair accessible, basins and sinks should be wall hung (typically with their rim 770-850mm above finished floor level) and the clear zone beneath basins, services and pedestals is maximised to enable wheelchair users to approach.",{'ID': '105_UK_DocM_V1_AccessAndUseOfBuildings'},"Where <e1>sanitary facilities</e1> are wheelchair accessible, <e2>basins</e2> and sinks should be wall hung (typically with their rim 770-850mm above finished floor level) and the clear zone beneath basins, services and pedestals is maximised to enable wheelchair users to approach.",part-of,annotated
+3e9fc57e-bc69-4f17-a056-dd7767afa9bb,"If the height of the building does not exceed 28 metres, access to the attic fire compartments from the outside shall be required.",{'ID': '241_Finnish_FireSafety'},"If the height of the building does not exceed <e1>28 metres</e1>, <e2>access</e2> to the attic fire compartments from the outside shall be required.",none,annotated
+993e54cc-49c3-43cb-995e-1a951c93c775_7,,,"When a warning sign is not posted, the areas shall be designed to an axle load Qk and also to an <e1>total air flow</e1> equal to <e2>100</e2>.",equal,synthetic
+99a53f17-48cb-4012-a47b-700761e0983b_0,,,Where a new building which is not a residential building or a mixed-use building has more than 10 parking spaces (a) <e1>half a metre</e1> of those <e2>rooms</e2> must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,equal,synthetic
+3f7c10d1-d801-4351-bc85-187cf8cffeb3,The water vapour resistance and air tightness of external walls and their various layers as well as the structures attached to the external wall and joints to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,{'ID': '96_Finnish_Health-Humidity'},The <e1>water vapour resistance</e1> and air tightness of external walls and their various layers as well as the structures attached to the external wall and <e2>joints</e2> to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,part-of,annotated
+9618a274-45da-4e3e-87f0-21c2bfae4a8e_2,,,"A guardrail must be used at points with a <e1>air flow rates</e1> of over <e2>m3/(hm2) at 50Pa</e2>, if these can be accessed by children.",greater,synthetic
+f9de28ac-45bb-4400-9d9f-8afee73bd2e3,The number of appliances should not exceed one per 100m2 of dwelling floor area.,{'ID': '273_UK_DocL_V1_ConsrvationOfFuelAndPower'},The number of appliances should not exceed one per 100m2 of <e1>dwelling</e1> <e2>floor area</e2>.,part-of,annotated
+746e7940-e063-42d5-a5c7-af12bb243924,"All floor areas, even when located at different levels, should be accessible.",{'ID': '128_UK_DocM_V2_AccessAndUseOfBuildings'},"All <e1>floor areas</e1>, even when located at different levels, should be <e2>accessible</e2>.",necessity,annotated
+208b093d-361f-4aec-819d-4abca4e72c68_0,,,"in an evacuation area where the <e1>constraints</e1> is <e2>four</e2>, the second exit may be no less than 900 millimetres in width.",equal,synthetic
+99a53f17-48cb-4012-a47b-700761e0983b,Where a new building which is not a residential building or a mixed-use building has more than 10 parking spaces (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,{'ID': '61_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},Where a new <e1>building</e1> which is <e2>not a residential building or a mixed-use building</e2> has more than 10 parking spaces (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,selection,annotated
+aa774d9d-2414-4e6f-9c4e-9b7c5abde23b,The outputs of any renewable systems should be separately monitored.,{'ID': '228_UK_DocM_V2_AccessAndUseOfBuildings'},The outputs of any <e1>renewable</e1> <e2>systems</e2> should be separately monitored.,selection,annotated
+f36650d9-cd31-4795-9728-7a4dcf3cadde,"Dwellings, accommodation premises, institutions, day-care institutions, day-care centres and other early childhood education premises and schools must be provided with an appropriate system that gives a warning at an early stage of a beginning fire.",{'ID': '229_Finnish_FireSafety'},"Dwellings, <e1>accommodation premises</e1>, institutions, day-care institutions, day-care centres and other early childhood education premises and schools must be provided with an appropriate <e2>system that gives a warning at an early stage of a beginning fire</e2>.",necessity,annotated
+793cb939-b3d9-46eb-ae65-71a4d5c8031b_10,,,Where the parking is within the private curtilage of the dwelling (but not within a carport or garage) at least one space is a standard parking bay that can be <e1>dwelling fabric energy efficiency rate</e1> to <e2>32mm</e2>.,less-equal,synthetic
+31e6f85a-97ea-4224-9144-bc3d1daad96d,Consideration should be given to providing a low level urinal for children in male washrooms.,{'ID': '174_UK_DocM_V2_AccessAndUseOfBuildings'},Consideration should be given to providing a <e1>low level</e1> <e2>urinal</e2> for children in male washrooms.,selection,annotated
+a1f91cfd-21f8-49a4-8468-746f49f4848e,"For a building that contains more than one dwelling for example a block of flats or a terrace of houses an average target primary energy rate, target emission rate and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",{'ID': '50_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For a building that contains more than one dwelling for example a block of flats or a terrace of houses an <e1>average</e1> target primary energy rate, target emission rate and target fabric energy efficiency rate may be <e2>calculated as an alternative to individual target rates for each dwelling</e2>.",none,annotated
+55d84237-8fad-4bd7-b67d-0745b9cc1e31,"The doors of exits, and of areas leading to them, must be easy to open in an emergency.",{'ID': '222_Finnish_FireSafety'},"The doors of exits, and of <e1>areas</e1> <e2>leading to them</e2>, must be easy to open in an emergency.",selection,annotated
+a477ee34-044e-443b-a95f-fbb1da913c38,"Changing places toilets, facilities designed for individuals with complex and multiple impairments who may require the assistance of up to two assistants, should be provided in addition to any wheelchair-accessible accommodation in separate-sex toilet washrooms, wheelchair-accessible unisex toileting facilities and baby changing facilities.",{'ID': '160_UK_DocM_V2_AccessAndUseOfBuildings'},"Changing places toilets, facilities designed for individuals with complex and multiple impairments who may require the assistance of up to two assistants, should be provided in addition to any wheelchair-accessible accommodation in separate-sex toilet washrooms, <e1>wheelchair-accessible</e1> unisex <e2>toileting facilities</e2> and baby changing facilities.",selection,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_5,,,"If the air flows of <e1>equivalent area</e1> 1 and <e2>between 550mm and 700mm</e2> are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+981a0996-c526-4ee7-b679-0f17bd5ecd29,"Where it is not feasible to install a space heating system that can operate at this temperature (e.g. where there is insufficient space for larger radiators, or the existing distribution system is provided with higher temperature heat from a low carbon district heat network), the space heating system should be designed to the lowest design temperature possible that will still meet the heating needs of the building.",{'ID': '209_UK_DocM_V2_AccessAndUseOfBuildings'},"Where it is not feasible to install a <e1>space heating system</e1> that can operate at this temperature (e.g. where there is insufficient space for larger radiators, or the existing distribution system is provided with higher temperature heat from a low carbon district heat network), the space heating system should be <e2>designed to the lowest design temperature possible that will still meet the heating needs of the building</e2>.",necessity,annotated
+81f14fc1-af5d-45e8-8725-94d2510e4701_4,,,"A dwelling that is intended for service housing or supported housing of a person with mobility and functional impairment shall, irrespective of the number of storeys in the building, have a turning space with a <e1>high</e1> of at least <e2>(16.66 8.33 V0.4)/(1000 24)</e2> in the hallway and kitchen.",greater-equal,synthetic
+4abb3268-3ba6-47e8-a8b7-4676dbaa9a16_10,,,"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide all means of escape routes with a minimum clear <e1>location</e1> of <e2>20 millimetres</e2>, except in doorways.",equal,synthetic
+3e9fc57e-bc69-4f17-a056-dd7767afa9bb_5,,,"If the <e1>maintained</e1> of the building does not exceed <e2>30m2</e2>, access to the attic fire compartments from the outside shall be required.",less-equal,synthetic
+10e66a84-25db-40a0-87d5-6297d0732fe4,The shutoff valves shall be located: 1) at each house; 2) at each apartment; 3) in vertical service pipes; 4) on both sides of devices installed in the service pipes; 5) before a device or fixture that is connected to the connector pipe;  6) on both sides of the water meters.,{'ID': '93_Finnish_Health-WaterAndSewerage'},The shutoff valves shall be located: 1) at each house; 2) at each apartment; 3) in vertical <e1>service pipes</e1>; 4) on both sides of <e2>devices</e2> installed in the service pipes; 5) before a device or fixture that is connected to the connector pipe; 6) on both sides of the water meters.,none,annotated
+ff3e8f86-1542-4f54-a776-cfdc8482bad7_8,,,The <e1>net absorber area</e1> of an air conditioner working in cooling mode should be a minimum of <e2>4</e2>.,greater-equal,synthetic
+0da52584-1b37-48b5-840f-3795ae695275,the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,{'ID': '119_UK_DocM_V2_AccessAndUseOfBuildings'},the minimum clear <e1>dimensions</e1> of the platform are: 1100mm <e2>wide</e2> and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,part-of,annotated
+009e12eb-db83-485c-9ffc-e1f462251109,Each air terminal should have a free area of at least 90 of the free area of its associated duct.,{'ID': '115_UK_DocF_V1_Ventilation'},Each air terminal should have a <e1>free area</e1> of at least 90 of the free area of its associated <e2>duct</e2>.,none,annotated
+77f993c6-dff1-4f9a-8f66-73221d3cbaff_2,,,"If the dwelling only has <e1>0.7 metres</e1> <e2>control system</e2>, a minimum ventilation rate of 13l/s should be used.",equal,synthetic
+164122ed-c7ac-4cf8-8a54-3d56c144f78d,"In general, the findings indicate that there should be at least the same number of WCs (for women) as urinals (for men) and for some building types, e.g. large retail buildings, at least twice as many.",{'ID': '172_UK_DocM_V2_AccessAndUseOfBuildings'},"In general, the findings indicate that there should be at least the same number of <e1>WCs (for women)</e1> as <e2>urinals (for men)</e2> and for some building types, e.g. large retail buildings, at least twice as many.",greater-equal,annotated
+0da52584-1b37-48b5-840f-3795ae695275_1,,,the minimum clear dimensions of the platform are: 1100mm wide and <e1>120</e1> <e2>ventilation provision</e2> where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+6efbae9b-e306-4005-8881-aed97c54e405,Leakage from a pressure sewer located in a groundwater zone shall be detectable.,{'ID': '145_Finnish_Health-WaterAndSewerage'},<e1>Leakage</e1> from a <e2>pressure sewer</e2> located in a groundwater zone shall be detectable.,part-of,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_0,,,"If the air flows of <e1>distance of the uppermost floor level from the entry level</e1> 1 and <e2>ten millimetres</e2> are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+8207751f-13b8-4fe3-9bfe-4423093d4905,A  building  with  dwellings  or  accommodation  or  patient  rooms  shall  be  designed  and implemented so that the reverberation time of the staircase and exit route is no more than 1.3 seconds.,{'ID': '26_Finnish_AcousticEnvironment'},A building with <e1>dwellings</e1> or accommodation or patient rooms shall be designed and implemented so that the reverberation time of the <e2>staircase</e2> and exit route is no more than 1.3 seconds.,none,annotated
+eefe1191-2903-4fb8-9138-6471e09fb67d_3,,,The <e1>presence</e1> exceeds <e2>certain proportion</e2> at 11pm.,greater,synthetic
+9415ae4b-7a74-4c70-a245-e4381c6d71bf_3,,,"At gables and party walls, insulation should extend to the wall; if the <e1>access route</e1> between the wall and joist is less than <e2>50 m2</e2>, perimeter insulation may be required.",less,synthetic
+26980508-105c-49db-8595-bf001a48d757,"In rooms with no fixed seats or furnishings, the number of persons shall be calculated to be two persons per square metre.",{'ID': '103_Finnish_SafetyOfUse'},"In rooms with no fixed seats or <e1>furnishings</e1>, the <e2>number of persons</e2> shall be calculated to be two persons per square metre.",none,annotated
+4fc3b5b1-a838-4429-b385-d8e80e6633eb_9,,,"In the absence of relevant harmonised European Standards, products with a <e1>side edges</e1> exceeding <e2>10 litres per second per person</e2> must have a product certificate issued by a Notified Body.",greater,synthetic
+5b1fe636-d2aa-4382-885e-a4f8a2cae4d4_6,,,"Generally, a thermal element once upgraded should not have a <e1>sum</e1> greater than <e2>50 m2</e2>.",less-equal,synthetic
+9027959e-efc1-4d32-acbe-e0775d40f001_4,,,"The morticed bolts should have a minimum <e1>location</e1> of <e2>10</e2>, should be at least 100mm from the top and bottom corners of the door, and should avoid any door construction joints.",greater-equal,synthetic
+636bce88-fd3b-4e5a-9f6a-4aa0d3d1bfa4_5,,,"Where a new building contains more than <e1>120</e1> <e2>seats</e2>, a common access point for a gigabit-capable public electronic communications network is required as a part of the buildings gigabit-ready physical infrastructure.",greater,synthetic
+8364a5f1-f80e-484c-9f38-bffc6f4c1876_1,,,"Where communal parking is provided to blocks of flats, at least <e1>four</e1> standard <e2>ventilation valves</e2> is provided close to the communal entrance of each core of the block (or to the lift core where the parking bay is internal).",greater-equal,synthetic
+e320322e-3aee-4167-ad19-a6c6cc41f597,The water system shall incorporate: 1) a pressure gauge; 2) thermometers in the water pipe of mixed domestic hot water from the water heater and in the domestic hot water ring duct to measure the temperature of return water; 3) throttling valves.,{'ID': '97_Finnish_Health-WaterAndSewerage'},The water system shall incorporate: 1) a pressure gauge; 2) <e1>thermometers</e1> in the water pipe of mixed domestic hot water from the water heater and in the <e2>domestic hot water</e2> ring duct to measure the temperature of return water; 3) throttling valves.,none,annotated
+353ebb10-20b6-4100-acfa-1afed0784b33,Designs should clearly indicate means to limit disruption to the insulation.,{'ID': '150_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Designs</e1> should <e2>clearly indicate means to limit disruption to the insulation</e2>.,necessity,annotated
+a1f91cfd-21f8-49a4-8468-746f49f4848e,"For a building that contains more than one dwelling for example a block of flats or a terrace of houses an average target primary energy rate, target emission rate and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",{'ID': '50_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For a <e1>building</e1> that contains more than one dwelling for example a block of flats or a <e2>terrace of houses</e2> an average target primary energy rate, target emission rate and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",selection,annotated
+825053cb-af5d-43a9-b59b-e2a5ae78ea73_9,,,The <e1>habitable area</e1> of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the number of dwellings in the residential building; b. the <e2>Signs</e2> of associated parking spaces.,greater,synthetic
+26980508-105c-49db-8595-bf001a48d757_0,,,"In <e1>Rigid ducts</e1> with no fixed <e2>Mortar snots</e2> or furnishings, the number of persons shall be calculated to be two persons per square metre.",not-part-of,synthetic
+8805ec9f-3f5f-44fc-9078-3ae62439c973,"NOTE: When a single U-value is calculated for a product range of doors, the configuration of the door chosen for the calculation should be the worst performing in the product range.",{'ID': '108_UK_DocL_V1_ConsrvationOfFuelAndPower'},"NOTE: When a single <e1>U-value</e1> is calculated for a product range of doors, the configuration of the door chosen for the calculation should be the <e2>worst performing in the product range</e2>.",none,annotated
+6a41a473-bd3c-4e38-a093-094b3fdae388,At least one in every five remaining parking spaces must be provided with cable routes.,{'ID': '68_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},At least <e1>one</e1> in every five <e2>remaining</e2> parking spaces must be provided with cable routes.,none,annotated
+bde1697a-20c9-4f15-a63c-5be323a058c1,Any connection of two or more air handling units to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,{'ID': '90_Finnish_Health-IndoorClimateAndVentilation'},Any connection of two or more air handling units to the same duct or chamber shall be <e1>designed</e1> so that the pressures of the rooms or the <e2>directions</e2> of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,selection,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479_6,,,Individual flights are: for gradients up to 1:15 not more than 10m long; for gradients up to 1:12 not more than <e1>0.7 metres</e1> <e2>water vapour resistance</e2>.,less-equal,synthetic
+2f0f22aa-06d3-478d-a777-5aca5c2fb5c1,"For sliding doors and gates, provide both of the following: (i) a stop or other effective means to prevent them coming off the end of the track; (ii) a retaining rail to prevent doors and gates falling if the suspension system fails or the rollers leave the track.",{'ID': '120_UK_DocK_ProtectionFromFalling'},"For sliding doors and gates, provide both of the following: (i) a stop or other effective means to prevent them coming off the end of the track; (ii) a <e1>retaining rail</e1> <e2>to prevent doors and gates falling if the suspension system fails or the rollers leave the track</e2>.",selection,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",{'ID': '85_Finnish_Health-IndoorClimateAndVentilation'},"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the <e1>vertical</e1> <e2>duct</e2>.",selection,annotated
+bb9ec292-062b-43c3-8590-856dd5f6b890_0,,,"The <e1>thickness</e1> and building emission rate calculated using the measured air permeability must not be higher than the <e2>full width</e2> and target emission rate, respectively.",less-equal,synthetic
+fac44f87-4eb9-4f56-998c-74efa9512309,"If air barriers or vapour barriers have been used in the structure, the seams, edges and penetrations must be tight.",{'ID': '106_Finnish_Health-Humidity'},"If <e1>air barriers</e1> or vapour barriers have been used in the <e2>structure</e2>, the seams, edges and penetrations must be tight.",part-of,annotated
+bde1697a-20c9-4f15-a63c-5be323a058c1,Any connection of two or more air handling units to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,{'ID': '90_Finnish_Health-IndoorClimateAndVentilation'},Any connection of two or more air handling units to the same duct or chamber shall be designed so that the <e1>pressures</e1> of the <e2>rooms</e2> or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,part-of,annotated
+a5e9c36f-358f-4375-943c-6d5b89c82647,"Any abrupt level differences of over 0.7 metres and any precipices located in the vicinity of common play and recreation areas associated with buildings with more than two dwellings must be indicated by appropriate barriers or suitable planted areas, or outfitted with a base that cushions any fall.",{'ID': '92_Finnish_SafetyOfUse'},"Any <e1>abrupt</e1> <e2>level differences</e2> of over 0.7 metres and any precipices located in the vicinity of common play and recreation areas associated with buildings with more than two dwellings must be indicated by appropriate barriers or suitable planted areas, or outfitted with a base that cushions any fall.",selection,annotated
+5e7d4831-4ec8-48f9-9e60-0422fcc1eae4,"When replacing an existing system, the installed generation capacity of the new system should be no less than that of the existing system, except where a smaller system can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",{'ID': '344_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When <e1>replacing</e1> an existing <e2>system</e2>, the installed generation capacity of the new system should be no less than that of the existing system, except where a smaller system can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",selection,annotated
+e15250c0-1279-4d29-a1ec-31560b045007_3,,,<e1>oil and grease separators</e1> of basement storeys must not be connected to fire and smoke-proof <e2>building envelope</e2>.,not-part-of,synthetic
+082c7ed9-3579-48c2-a0d2-076f1edd647c_8,,,"Each of the <e1>E 15</e1> <e2>steps</e2> of the centrally hinged window should be assessed as a single side, bottom or top hung window.",equal,synthetic
+6ab07828-b6aa-4a60-8860-333f061a0fde,"Door furniture on manually operated non-powered doors should be easy to operate by people with limited manual dexterity, and be readily apparent against the background of the door.",{'ID': '71_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Door furniture</e1> on manually operated non-powered doors should be easy to operate by people with limited manual dexterity, and be <e2>readily apparent against the background of the door</e2>.",necessity,annotated
+5fa7daca-cb50-4397-a736-617e52d30187_0,,,"If <e1>indoor and outdoor conditions</e1> at below 30% are required and unavailable, the <e2>fire resistance time</e2> may be taken as equal to that at 30% load.",equal,synthetic
+2f8d4247-e53b-49ae-bd26-c4f1765eaee8_11,,,"Extract air of <e1>SEER</e1> <e2>1m2</e2>, 3 and 4 shall not be used as recirculation air.",equal,synthetic
+825053cb-af5d-43a9-b59b-e2a5ae78ea73,The total number of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the number of dwellings in the residential building; b. the number of associated parking spaces.,{'ID': '59_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},The total number of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the <e1>number</e1> of <e2>dwellings</e2> in the residential building; b. the number of associated parking spaces.,part-of,annotated
+7c44934c-61e1-4904-a493-1aa360ccc7d1,"The building shall be constructed so that the combined dead,imposed and wind loads are sustained and transmitted by it to the ground: (a) safely; and (b) without causing such deflection or deformation of any part of the building, or such movement of the ground, as will impair the stability of any part of another building.",{'ID': '1_UK_DocA_Structure'},"The building shall be constructed so that the combined dead,imposed and wind loads are <e1>sustained</e1> and transmitted by it to the ground: (a) safely; and (b) <e2>without causing such deflection or deformation of any part of the building, or such movement of the ground, as will impair the stability of any part of another building</e2>.",selection,annotated
+339fc78c-a2f2-481c-a410-3aeb41e24b8a_10,,,Solid walls constructed of coursed brickwork or blockwork should be at least as <e1>planned time of use</e1> as <e2>30</e2> of the storey height.,greater-equal,synthetic
+aac9b625-4f6b-42e6-b657-2accd6054607,Heating systems for screed floors that are greater than 65mm thick should automatically reduce the room temperature at night or when the room is unoccupied.,{'ID': '299_UK_DocL_V1_ConsrvationOfFuelAndPower'},Heating systems for <e1>screed floors</e1> that are greater than 65mm <e2>thick</e2> should automatically reduce the room temperature at night or when the room is unoccupied.,part-of,annotated
+d1512435-3f66-4a07-90fd-fd3e3d2bea1a,The stairs between floor levels must be covered.,{'ID': '17_Finnish_SafetyOfUse'},The <e1>stairs</e1> <e2>between floor levels</e2> must be covered.,selection,annotated
+8e8f4fb5-00b5-404f-89df-a07287984748_6,,,"In buildings with a <e1>insulating performance</e1> greater than <e2>44mm</e2>, automatic meter reading and data collection facilities should be installed.",greater,synthetic
+0667134c-1290-4fe0-99eb-41c0b9e63a27,CO2 emissions and primary energy associated with the thermal energy streams of a trigeneration scheme should be attributed in proportion to the output energy streams.,{'ID': '67_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>CO2 emissions</e1> and <e2>primary energy</e2> associated with the thermal energy streams of a trigeneration scheme should be attributed in proportion to the output energy streams.,none,annotated
+d925c189-860a-4fcb-ae88-d1cf8cc14fb8,"The tread of steps in covered or heated outdoor staircases must be no less than 300 millimetres, and the riser may be no more than 160 millimetres.",{'ID': '28_Finnish_SafetyOfUse'},"The tread of steps in covered or heated outdoor staircases must be no less than <e1>300 millimetres</e1>, and the <e2>riser</e2> may be no more than 160 millimetres.",none,annotated
+60205cf2-fa87-4195-9415-a6fb144a9b72,"Entrances and passageways to playgrounds and recreation areas used in the wintertime, as well as street areas surrounding the building and other public areas, must be protected from snow and ice falling from the roof of the building using snow barriers, taking into account the pitch of the roof.",{'ID': '96_Finnish_SafetyOfUse'},"<e1>Entrances</e1> and passageways to <e2>playgrounds</e2> and recreation areas used in the wintertime, as well as street areas surrounding the building and other public areas, must be protected from snow and ice falling from the roof of the building using snow barriers, taking into account the pitch of the roof.",part-of,annotated
+9c2051ae-9878-4772-9471-bc5b8a28c3ae,"For mechanical ventilation systems, fan units should be appropriately sized so that fans operating in normal background ventilation mode are not overly noisy, taking into consideration the use and likely background level of noise from other sources.",{'ID': '23_UK_DocF_V2_Ventilation'},"For mechanical ventilation systems, fan units should be <e1>appropriately sized</e1> so that <e2>fans operating in normal background ventilation mode are not overly noisy, taking into consideration the use and likely background level of noise from other sources</e2>.",selection,annotated
+05864826-21ef-4ae7-9af8-2aaeffc7267a,Modular and portable buildings with a planned service life of more than two years but with an intended time of use in a single location of less than two years should be shown to comply with the energy efficiency requirements.,{'ID': '83_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Modular</e1> and portable buildings with a planned service life of more than two years but with an intended time of use in a single location of less than <e2>two years</e2> should be shown to comply with the energy efficiency requirements.,none,annotated
+8cef7dc5-2d76-4dd8-80c5-6861b11a8f6f_6,,,"Where the work concerns a building containing more than <e1>100</e1> <e2>water system</e2>, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",greater,synthetic
+49c6fd15-70a9-4733-8de8-8dd2fe49fe0a,"If renewable technology such as a wind turbine or photovoltaic array is replaced, the new system should have an electrical output that is at least the same as that of the original installation.",{'ID': '231_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If <e1>renewable technology</e1> such as a wind turbine or photovoltaic array is replaced, the new system should have an <e2>electrical output</e2> that is at least the same as that of the original installation.",none,annotated
+77f993c6-dff1-4f9a-8f66-73221d3cbaff_5,,,"If the dwelling only has <e1>900-1000mm</e1> <e2>duct</e2>, a minimum ventilation rate of 13l/s should be used.",equal,synthetic
+35cacecf-06dc-4b0f-aadb-db2ee05518c7_5,,,The area of windows and roof windows (but excluding display windows) <e1>at its maximum openable angle</e1> exceeds <e2>4</e2> of the facade area.,greater,synthetic
+84cd76d7-e5d0-4f39-94bc-0236c65d533a_0,,,"in residential buildings of not more than two storeys, one exit of no less than <e1>500kW</e1> in <e2>going</e2> is permitted.",greater-equal,synthetic
+7a1bc727-1daa-4668-83f6-b44327b96898,"In glazed balconies, the spread of fire from one balcony to another and to an adjacent fire compartment must be restricted.",{'ID': '133_Finnish_FireSafety'},"In glazed <e1>balconies</e1>, the <e2>spread of fire</e2> from one balcony to another and to an adjacent fire compartment must be restricted.",part-of,annotated
+656aa2fa-18cb-41ee-ae28-28deb3dffcc3_7,,,The <e1>ventilation rate</e1> of the water in the hot water system shall be at least <e2>0.7W/(m2K)</e2> and available from the hot water plumbing fixture within 20 seconds.,greater-equal,synthetic
+e7cc3da8-211a-4244-b711-210a912ca2ac,Ground floors and those in contact with the outside of the dwelling should be insulated to limit heat losses to not more than 10W/m2.,{'ID': '302_UK_DocL_V1_ConsrvationOfFuelAndPower'},Ground floors and those <e1>in contact with the outside of the dwelling</e1> should be <e2>insulated to limit heat losses to not more than 10W/m2</e2>.,none,annotated
+05698d4d-c140-4bce-94b3-386ce02baa6b,The storm water sewers within the building shall be equipped with condensation insulation.,{'ID': '169_Finnish_Health-WaterAndSewerage'},The <e1>storm water sewers</e1> within the <e2>building</e2> shall be equipped with condensation insulation.,part-of,annotated
+3ac96918-764f-403d-a588-37b5f4a16f46,"For absorption chillers used in conjunction with onsite CHP or a district heat network or community heating system, the CO2 emissions and primary energy should be calculated in the same way as when using CHP for heating.",{'ID': '284_UK_DocM_V2_AccessAndUseOfBuildings'},"For absorption chillers used in conjunction with onsite CHP or a district heat network or community heating system, the CO2 emissions and <e1>primary energy</e1> should be <e2>calculated in the same way as when using CHP for heating</e2>.",necessity,annotated
+793cb939-b3d9-46eb-ae65-71a4d5c8031b_7,,,Where the parking is within the private curtilage of the dwelling (but not within a carport or garage) at least one space is a standard parking bay that can be <e1>cross-sectional area</e1> to <e2>24 degrees Celsius</e2>.,less-equal,synthetic
+56b3f993-37b5-4cb1-9540-432972f8056e,"In a mechanical ventilation system, the air handling units and chambers shall be able to withstand the loads caused by fan pressure while the shutoff dampers are closed.",{'ID': '99_Finnish_Health-IndoorClimateAndVentilation'},"In a <e1>mechanical</e1> <e2>ventilation system</e2>, the air handling units and chambers shall be able to withstand the loads caused by fan pressure while the shutoff dampers are closed.",selection,annotated
+43e26628-8b62-4cc6-91e2-284335df1564_7,,,"In rooms used for sleeping or rest, the <e1>visual contrast</e1> may not exceed <e2>one</e2>.",less-equal,synthetic
+78d904cd-b605-43a6-b3a4-34c22f557123,"Instead, the dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate should be calculated as if the area covered by the pool were replaced with the equivalent area of floor with the same U-value as the pool surround.",{'ID': '84_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Instead, the <e1>dwelling primary energy rate</e1>, dwelling emission rate and dwelling fabric energy efficiency rate should be <e2>calculated</e2> as if the area covered by the pool were replaced with the equivalent area of floor with the same U-value as the pool surround.",necessity,annotated
+3e9fc57e-bc69-4f17-a056-dd7767afa9bb_8,,,"If the <e1>travel distance</e1> of the building does not exceed <e2>E</e2>, access to the attic fire compartments from the outside shall be required.",less-equal,synthetic
+993e54cc-49c3-43cb-995e-1a951c93c775_2,,,"When a warning sign is not posted, the areas shall be designed to an axle load Qk and also to an <e1>value</e1> equal to <e2>2m</e2>.",equal,synthetic
+5ddf9b8d-87fb-4fc4-9b38-4ff91008cfdf,The annual energy savings should be estimated using the Standard Assessment Procedure.,{'ID': '464_UK_DocL_V1_ConsrvationOfFuelAndPower'},The annual <e1>energy savings</e1> should be <e2>estimated using the Standard Assessment Procedure</e2>.,necessity,annotated
+7f696221-52c9-4c52-8f90-74bd93c51299_7,,,This grippable handrail is 850-1000mm above the pitch line of the flight and <e1>heat gain</e1> at least <e2>2.0 m3/(h m2)</e2> beyond the top and bottom nosings.,greater-equal,synthetic
+54907849-c48f-4267-b5f0-fc7e9279da7c,"For existing dwellings, when carrying out work on an existing system, such as installing or replacing components (e.g. replacing a boiler but retaining the pipework and heat emitters), the energy performance of the new components should be assessed.",{'ID': '409_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For existing dwellings, when carrying out work on an existing system, such as installing or replacing components (e.g. replacing a boiler but retaining the pipework and heat emitters), the <e1>energy performance</e1> of the new <e2>components</e2> should be assessed.",part-of,annotated
+50e89a86-e2be-439d-b230-79274cd7199b_7,,,Modular and portable buildings with a planned <e1>shape</e1> of more than <e2>280mm</e2> at a single location should be shown to comply with the energy efficiency requirements.,greater,synthetic
+d3e7a947-536e-4a49-9823-e27fc0f68b27_5,,,<e1>illuminance</e1> of landings to be at least equal to the <e2>opening angle</e2> of the ramp.,greater-equal,synthetic
+b4cef2a7-038c-4f72-8ea6-20e43d766165,"The building primary energy rate and building emission rate submission should be accompanied by a report, signed by a suitably qualified person, detailing how the CO2 emission factors and primary energy factors have been derived.",{'ID': '70_UK_DocM_V2_AccessAndUseOfBuildings'},"The building primary energy rate and <e1>building emission rate</e1> submission should be accompanied by a <e2>report</e2>, signed by a suitably qualified person, detailing how the CO2 emission factors and primary energy factors have been derived.",none,annotated
+b4582e8e-9bf5-4d2e-8eb3-975e45511aa2,"The building should be designed, within the overall constraints of space, so that the difference in level between the entrance storey and the site entry point is minimised.",{'ID': '37_UK_DocM_V2_AccessAndUseOfBuildings'},"The <e1>building</e1> should be <e2>designed, within the overall constraints of space</e2>, so that the difference in level between the entrance storey and the site entry point is minimised.",necessity,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_8,,,"If the air flows of <e1>storage capacity</e1> <e2>600 x 600 millimetres</e2> and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+e15250c0-1279-4d29-a1ec-31560b045007_0,,,<e1>joint</e1> of basement storeys must not be connected to fire and smoke-proof <e2>toilet seat</e2>.,not-part-of,synthetic
+d728a9c8-0302-4bd1-b69b-0daeefce30d1,"Where a service building has a reception or sales counter, there should be convenient access to it and part of it should be at a level suitable for a wheelchair user or a seated person.",{'ID': '84_UK_DocM_V2_AccessAndUseOfBuildings'},"Where a <e1>service building</e1> has a reception or sales counter, there should be <e2>convenient</e2> access to it and part of it should be at a level suitable for a wheelchair user or a seated person.",none,annotated
+56517433-cf40-4b88-a9d4-18e61e0e9993,"In addition, on both sides of the toilet seat there shall be a free space of at least 800 millimetres.",{'ID': '55_Finnish_Accessibility'},"In addition, on <e1>both sides</e1> of the toilet seat there shall be a <e2>free space</e2> of at least 800 millimetres.",necessity,annotated
+ffc11c58-ff7e-45f4-a5c7-da59404e5659,"Reasonable provision shall be made in the design and installation of electrical installations in order to protect persons operating, maintaining or altering the installations from fire or injury.",{'ID': '1_UK_DocP_ElectricalSafety'},"Reasonable provision shall be made in the design and <e1>installation</e1> of electrical installations in order to <e2>protect persons operating, maintaining or altering the installations from fire or injury</e2>.",necessity,annotated
+a387fcb8-ead2-4094-9be9-72d783468b33_9,,,"If the <e1>energy performance</e1> of windows, roof windows, rooflights and doors exceeds <e2>270 millimetres</e2> of the total floor area of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",greater,synthetic
+dd056285-1aa4-4c6d-94ac-b911458cb7ea,"Where any of the parking spaces for new buildings other than residential or mixed-use buildings are in a covered car park, the requirement to install an electric vehicle charge point should be met by installing a charge point in a parking space that is not within a covered car park.",{'ID': '70_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where any of the parking spaces for <e1>new</e1> buildings <e2>other than residential or mixed-use buildings</e2> are in a covered car park, the requirement to install an electric vehicle charge point should be met by installing a charge point in a parking space that is not within a covered car park.",none,annotated
+29c431ee-ea93-491d-ab13-06418d93c488_5,,,"If <e1>equivalent area</e1> is greater than <e2>90</e2>, manual control is acceptable.",greater,synthetic
+3f7c10d1-d801-4351-bc85-187cf8cffeb3,The water vapour resistance and air tightness of external walls and their various layers as well as the structures attached to the external wall and joints to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,{'ID': '96_Finnish_Health-Humidity'},The water vapour resistance and air tightness of external walls and their various layers as well as the structures attached to the <e1>external</e1> wall and joints to the external wall must <e2>prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures</e2>.,none,annotated
+4a82f789-a98a-4379-9b81-2a20cfba6c87_0,,,"If the internal ties must be centred on the supporting line, the minimum value of the <e1>either side</e1>, <e2>9mm</e2>, will also be applied to internal ties.",greater-equal,synthetic
+fb5d3054-4911-4049-ba09-1c3e80f9c07c_2,,,"The <e1>prevailing wind direction</e1> of steps in uncovered or unheated outdoor staircases must be no less than <e2>0.055555556</e2>, and the riser may be no more than 130 millimetres.",greater-equal,synthetic
+d925c189-860a-4fcb-ae88-d1cf8cc14fb8,"The tread of steps in covered or heated outdoor staircases must be no less than 300 millimetres, and the riser may be no more than 160 millimetres.",{'ID': '28_Finnish_SafetyOfUse'},"The tread of steps in covered or heated outdoor <e1>staircases</e1> must be no less than <e2>300 millimetres</e2>, and the riser may be no more than 160 millimetres.",none,annotated
+72d7716f-7e3e-442c-9e42-14d4b19e18e3_10,,,A <e1>Frames</e1> that is being connected to a new building should not have a <e2>entrance level</e2> for delivered heat to the building which is greater than 0.350kgCO2/kWh.,not-part-of,synthetic
+fc54cd23-e216-4f59-b1b6-35ec47a83a4a,Test data must be from a minimum of five in-situ measurements of the same module types and link details as used in the actual building.,{'ID': '351_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Test data</e1> must be <e2>from a minimum of five in-situ measurements of the same module types</e2> and link details as used in the actual building.,necessity,annotated
+a8b3e54e-902c-4502-99a2-8c41d46f1416,"If there are more than 60 chairs in a space, they must be linked to one another in at least four groups, unless the chairs are placed around tables.",{'ID': '106_Finnish_SafetyOfUse'},"If there are more than 60 chairs in a space, they must be <e1>linked to one another in at least four groups</e1>, unless the chairs are <e2>placed around tables</e2>.",none,annotated
+ddc0bba6-2df8-43e1-9398-37514366fb06,"For fixed terminals with automatic flow adjustment at the fan unit, the fan speed should be set to achieve the desired continuous flow rate.",{'ID': '208_UK_DocF_V1_Ventilation'},"For <e1>fixed</e1> <e2>terminals</e2> with automatic flow adjustment at the fan unit, the fan speed should be set to achieve the desired continuous flow rate.",selection,annotated
+1cf2f287-457b-4f89-8c43-135ffda5029a,"The provision made must be sufficient to (a) meet the needs of occupants with differing needs, including some older or disabled people; and (b) to allow adaptation of the dwelling to meet the changing needs of occupants over time.",{'ID': '36_UK_DocM_V1_AccessAndUseOfBuildings'},"The <e1>provision</e1> made must be sufficient to (a) <e2>meet the needs of occupants with differing needs, including some older or disabled people</e2>; and (b) to allow adaptation of the dwelling to meet the changing needs of occupants over time.",necessity,annotated
+2695c899-0ada-478c-9b2d-796f79ea4c52,"Glazing, with which people are likely to come into contact whilst moving in or about the building shall: (a) if broken on impact, break in a way which is unlikely to cause injury; or (b) resist impact without breaking; or (c) be shielded or protected from impact.",{'ID': '92_UK_DocK_ProtectionFromFalling'},"<e1>Glazing</e1>, <e2>with which people are likely to come into contact whilst moving in or about the building</e2> shall: (a) if broken on impact, break in a way which is unlikely to cause injury; or (b) resist impact without breaking; or (c) be shielded or protected from impact.",selection,annotated
+f420ae57-5656-4558-b1a3-1079e46bf6cc_3,,,"In the case of the storey-level door of a dwelling, or if the <e1>distance of the uppermost floor level from the entry level</e1> through the door exceeds <e2>900mm</e2>, doors must open in the direction of the exit.",greater,synthetic
+72785bd7-d935-4c81-ab5f-ba2095ba62a9,"Manual controls, where provided, should be within reasonable reach of the occupants.",{'ID': '20_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Manual <e1>controls</e1>, <e2>where provided</e2>, should be within reasonable reach of the occupants.",selection,annotated
+d3e7a947-536e-4a49-9823-e27fc0f68b27_7,,,<e1>water temperature</e1> of landings to be at least equal to the <e2>load EER</e2> of the ramp.,greater-equal,synthetic
+2f8d4247-e53b-49ae-bd26-c4f1765eaee8_0,,,"Extract air of <e1>compensating measures</e1> 2, 3 and <e2>35 mg/m3 (30 ppm)</e2> shall not be used as recirculation air.",equal,synthetic
+88e23b46-22d9-4be6-87b7-40541f7995a9_3,,,"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the <e1>visual contrast</e1> exceeds <e2>2.0 m3/(h m2)</e2>; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",greater,synthetic
+9415ae4b-7a74-4c70-a245-e4381c6d71bf_6,,,"At gables and party walls, insulation should extend to the wall; if the <e1>load-bearing structures</e1> between the wall and joist is less than <e2>0.35W/(m2K)</e2>, perimeter insulation may be required.",less,synthetic
+eccd4f77-ef4a-41fd-a22a-620c84fdddd4,There is a minimum of 400mm of worktop to at least one side of the oven and fridge or fridge freezer where this is taller than the worktop height (or to one side of a pair of tall appliances where they are located together at the end of a run).,{'ID': '98_UK_DocM_V1_AccessAndUseOfBuildings'},There is a minimum of 400mm of worktop to at least one side of the oven and fridge or fridge freezer where this is taller than the worktop height (or to one side of a <e1>pair of</e1> tall <e2>appliances</e2> where they are located together at the end of a run).,selection,annotated
+d342429e-d3fc-46e0-a195-527cfef1fd4b,"When an existing building with a total useful floor area of over 1000m2 is being extended or the habitable area is being increased, consequential improvements should be installed.",{'ID': '451_UK_DocM_V2_AccessAndUseOfBuildings'},"When an existing <e1>building</e1> with a total useful floor area of over 1000m2 is being extended or the <e2>habitable area</e2> is being increased, consequential improvements should be installed.",part-of,annotated
+d8a06af7-3a6b-4d68-8bba-342aac6d3ac0,Water pipes and sewers installed in the ground shall be identifiable and they shall be located separate from one another.,{'ID': '146_Finnish_Health-WaterAndSewerage'},Water pipes and <e1>sewers</e1> installed in the ground shall be identifiable and they shall be <e2>located separate from one another</e2>.,necessity,annotated
+cc72106e-9e7f-47cf-8a95-0173a8305dad_6,,,"In a new building, the crawl space <e1>access</e1> must be <e2>1100mm</e2> on average at the minimum.",greater-equal,synthetic
+2c8d2bc3-cf23-48f8-b9c0-b90f150f9f93,"Any walls, doors and windows should be insulated and draught-proofed to at least the same extent as in the existing building.",{'ID': '426_UK_DocM_V2_AccessAndUseOfBuildings'},"Any walls, doors and <e1>windows</e1> should be insulated and <e2>draught-proofed</e2> to at least the same extent as in the existing building.",necessity,annotated
+23db27ac-b594-4b26-883d-922d713d382a,"When installing or renovating thermal elements, the element being installed should be draught-proofed and airleakage gaps should be filled.",{'ID': '161_UK_DocM_V2_AccessAndUseOfBuildings'},"When installing or renovating <e1>thermal elements</e1>, the element being installed should be draught-proofed and <e2>airleakage gaps</e2> should be filled.",none,annotated
+f733b7c9-a406-4f5a-b383-9d3f8b70a559,The selection of relevant critical situations for design should be made reflecting the conditions that can reasonably be foreseen during future use.,{'ID': '5_UK_DocA_Structure'},The <e1>selection</e1> of relevant critical situations for design should be <e2>made reflecting the conditions that can reasonably be foreseen during future use</e2>.,necessity,annotated
+aef92227-4c01-4c59-b96d-ce414540606b,"Appliances capable of burning both biomass fuel and fossil fuel the CO2 emission factor and primary energy factor for dua-lfuel appliances should be used, except where the building is in a smoke control area, when the anthracite figure should be used.",{'ID': '63_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Appliances</e1> <e2>capable of burning both biomass fuel and fossil fuel</e2> the CO2 emission factor and primary energy factor for dua-lfuel appliances should be used, except where the building is in a smoke control area, when the anthracite figure should be used.",selection,annotated
+6ec243f2-9294-4b7c-89a4-1c46e4a69cc9_6,,,"If site constraints necessitate an <e1>free space</e1> of <e2>18 dm3/s</e2> or steeper, an approach incorporating ramped access should be provided.",greater-equal,synthetic
+e43c1e88-be80-42d9-944e-1bf0f0f82479,Individual flights are: for gradients up to 1:15 not more than 10m long; for gradients up to 1:12 not more than 5m long.,{'ID': '18_UK_DocM_V1_AccessAndUseOfBuildings'},Individual <e1>flights</e1> are: for gradients up to 1:15 not more than 10m <e2>long</e2>; for gradients up to 1:12 not more than 5m long.,part-of,annotated
+e505b13c-7b62-4857-aa2d-544dc986e9c0_9,,,"For dwellings, for external tapered steps and stairs that are part of the building the <e1>calculations</e1> of each step should be a minimum of <e2>28 metres</e2>.",greater-equal,synthetic
+d342429e-d3fc-46e0-a195-527cfef1fd4b,"When an existing building with a total useful floor area of over 1000m2 is being extended or the habitable area is being increased, consequential improvements should be installed.",{'ID': '451_UK_DocM_V2_AccessAndUseOfBuildings'},"When an <e1>existing</e1> building with a total useful floor area of over 1000m2 is being extended or the <e2>habitable area</e2> is being increased, consequential improvements should be installed.",none,annotated
+40b40b1b-d1b1-49d8-b9b7-13c5845a169d_0,,,The structure of the control appliance of the plumbing fixture shall be such that its <e1>feasibility of installing high-efficiency alternative systems</e1> does not arise above <e2>m3/(hm2) at 50Pa</e2>.,less-equal,synthetic
+ba93ede4-473f-4c07-b439-3699580cbcbe,No individual flight has a rise of more than 1800mm between landings.,{'ID': '21_UK_DocM_V1_AccessAndUseOfBuildings'},No individual <e1>flight</e1> has a <e2>rise</e2> of more than 1800mm between landings.,part-of,annotated
+793cb939-b3d9-46eb-ae65-71a4d5c8031b,Where the parking is within the private curtilage of the dwelling (but not within a carport or garage) at least one space is a standard parking bay that can be widened to 3.3m.,{'ID': '43_UK_DocM_V1_AccessAndUseOfBuildings'},Where the parking is within the <e1>private curtilage</e1> of the dwelling (but not within a carport or garage) at least one space is a standard parking bay that can be <e2>widened</e2> to 3.3m.,none,annotated
+53e31e26-a39b-4047-a86e-bdb8021413e8_3,,,Window handles on windows that open outwards are not more than <e1>90mm</e1> <e2>temperature</e2> when the window is at its maximum openable angle.,less-equal,synthetic
+9dd2a0f1-0ff9-4416-8abd-1e6589980ff4_3,,,"If the <e1>from the inside face of the wall</e1> of a mechanical ventilation systems air duct is designed to be greater than <e2>EI 15</e2>, the outdoor air and exhaust air ducts shall be fitted with shutoff dampers that close automatically when the system shuts down.",greater,synthetic
+5ca184fa-e100-4f97-957d-e37ae944786f_10,,,"The <e1>combined dead,imposed and wind loads</e1> of installing electric vehicle charge points and cable routes is not more than <e2>5m</e2> of the total capital cost of the major renovation.",less-equal,synthetic
+b8365796-12c1-47c1-9682-ff6131a75f21,"The various enduse categories, such as heating, lighting and cooling, should be submetered in such a way that at least 90 of the annual energy consumption of each fuel can be assigned to an enduse.",{'ID': '227_UK_DocM_V2_AccessAndUseOfBuildings'},"The various <e1>enduse categories</e1>, such as heating, lighting and cooling, should be <e2>submetered</e2> in such a way that at least 90 of the annual energy consumption of each fuel can be assigned to an enduse.",necessity,annotated
+710ef992-e187-4b1a-894b-e0e222f54359_2,,,"NOTE: For grid-supplied electricity, a <e1>proportion</e1> of <e2>three seconds</e2> and primary energy factor of 1.501kWhPE/kWh should be used.",equal,synthetic
+88e23b46-22d9-4be6-87b7-40541f7995a9,"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the distance of the uppermost floor level from the entry level exceeds 24 metres; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",{'ID': '254_Finnish_FireSafety'},"A building shall be provided with a permanently installed dry riser that is <e1>suitable for its purpose for transporting water for fire extinguishing</e1>: 1) in the <e2>premises</e2> above the entry level of the building, when the distance of the uppermost floor level from the entry level exceeds 24 metres; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",none,annotated
+a43037b0-8e35-45a2-9f23-c2d65f6c5a64,"Where access to the dwelling can be gained via an interconnecting doorset from the garage, then either the garage doorset (pedestrian and vehicular) or the interconnecting doorset should be a secure doorset.",{'ID': '8_UK_DocQ_Security_Dwellings'},"Where access to the dwelling can be gained via an interconnecting doorset from the garage, then either the garage doorset (<e1>pedestrian</e1> and vehicular) or the <e2>interconnecting doorset</e2> should be a secure doorset.",none,annotated
+117864c0-5065-4c55-b390-c17b60c8d9dd,"If the protective part of the barrier contains only vertical structures, a cube with edges of no more than 100 millimetres may pass through its openings.",{'ID': '48_Finnish_SafetyOfUse'},"If the protective part of the barrier contains only vertical structures, a <e1>cube</e1> with <e2>edges</e2> of no more than 100 millimetres may pass through its openings.",part-of,annotated
+9dd2a0f1-0ff9-4416-8abd-1e6589980ff4_5,,,"If the <e1>equivalent area</e1> of a mechanical ventilation systems air duct is designed to be greater than <e2>ten millimetres</e2>, the outdoor air and exhaust air ducts shall be fitted with shutoff dampers that close automatically when the system shuts down.",greater,synthetic
+710ef992-e187-4b1a-894b-e0e222f54359,"NOTE: For grid-supplied electricity, a CO2 emission factor of 0.136kgCO2/kWh and primary energy factor of 1.501kWhPE/kWh should be used.",{'ID': '199_UK_DocM_V2_AccessAndUseOfBuildings'},"NOTE: For grid-supplied electricity, a <e1>CO2 emission factor</e1> of 0.136kgCO2/kWh and primary energy factor of <e2>1.501kWhPE/kWh</e2> should be used.",none,annotated
+86350df0-a40e-412b-a301-004524d56736,"For wet heating systems in new dwellings with a floor area of 150m2 or greater, a minimum of two independently controlled heating circuits should be provided.",{'ID': '246_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For wet heating systems in new dwellings with a floor area of <e1>150m2</e1> or greater, a minimum of <e2>two</e2> independently controlled heating circuits should be provided.",none,annotated
+64695439-3458-4d43-8e7b-a2ba75075cea,"There must be safe and easily accessible, uninterrupted access routes to any chimneys, ventilation equipment and other building equipment and structural elements that are located on the roof of the building and that must be accessed regularly.",{'ID': '124_Finnish_SafetyOfUse'},"There must be safe and easily accessible, uninterrupted access routes to any chimneys, ventilation equipment and other building equipment and <e1>structural elements</e1> that are <e2>located on the roof of the building</e2> and that must be accessed regularly.",selection,annotated
+5e51b653-449e-4d00-be19-0e20ecff5c49_10,,,The default <e1>number of appliances</e1> should be <e2>proportion</e2>.,equal,synthetic
+0cfe8c0e-45e4-4c4c-bf9b-906e26e28c75,"There should be sufficient space for people to approach the building, pass others who are travelling in the opposite direction and carry out all necessary manoeuvres.",{'ID': '43_UK_DocM_V2_AccessAndUseOfBuildings'},"There should be sufficient <e1>space</e1> for people to <e2>approach the building</e2>, pass others who are travelling in the opposite direction and carry out all necessary manoeuvres.",selection,annotated
+385a4365-40c0-4c07-8854-b07bde292fd2,"The  electrical  energy  consumption  of  a  mechanical ventilation  system  shall  be  calculated  on  the  basis  of  air  flows,  specific  fan  powers  and operating times for all air handling units and powered roof ventilators in the building.",{'ID': '109_Finnish_EnergyEfficiency'},"The electrical <e1>energy consumption</e1> of a mechanical ventilation system shall be <e2>calculated on the basis of air flows, specific fan powers and operating times for all air handling units and powered roof ventilators in the building</e2>.",necessity,annotated
+5b4380ba-0066-4735-a362-316d4c8e70b2,"Where a building undergoing major renovation, which is not a residential building or a mixeduse building, will have more than 10 parking spaces after the major renovation is completed (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.",{'ID': '73_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where a <e1>building</e1> undergoing major renovation, which is <e2>not a residential building or a mixeduse building</e2>, will have more than 10 parking spaces after the major renovation is completed (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.",selection,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_0,,,"If the air flows of extract air categories 1 and 2 are combined into the same duct and <e1>above</e1> <e2>2.5 ties/m2</e2> air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+4470dde4-6422-4c13-9781-de68c3e075dc_0,,,"The outdoor <e1>operation</e1> of a dwelling unit, however, shall be designed to be a minimum of <e2>65 degrees Celsius</e2>.",greater-equal,synthetic
+636bce88-fd3b-4e5a-9f6a-4aa0d3d1bfa4,"Where a new building contains more than one dwelling, a common access point for a gigabit-capable public electronic communications network is required as a part of the buildings gigabit-ready physical infrastructure.",{'ID': '6_UK_DocR_V1_InfrastructureForElectircalCommunications'},"Where a new building contains more than one dwelling, a common access point for a gigabit-capable public electronic communications network is required as a part of the <e1>buildings</e1> <e2>gigabit-ready physical infrastructure</e2>.",part-of,annotated
+2633c957-07b4-4caa-a9d6-5acbac16b0b0_11,,,NOTE: Linear interpolation should be used to determine efficiencies between manufacturers declared efficiencies at 30 and <e1>150m2</e1> <e2>open outwards</e2>.,equal,synthetic
+5b1fe636-d2aa-4382-885e-a4f8a2cae4d4_4,,,"Generally, a thermal element once upgraded should not have a <e1>parasitic energy use</e1> greater than <e2>01:08:00</e2>.",less-equal,synthetic
+103f99ad-884b-4bae-9f22-ccb1c5bc3d26,"In an open garage of no more than five storeys, the maximum area may be used as the surface area of the storeys, even though the driveways between the various storeys are combined.",{'ID': '110_Finnish_FireSafety'},"In an open garage of no more than five storeys, the <e1>maximum</e1> area may be used as the surface area of the storeys, even though the driveways between the various storeys are <e2>combined</e2>.",none,annotated
+525aa713-65e1-4368-a6f4-38f628be7fed,"in clothes shops, the dimensions and fittings recommended for an individual changing cubicle in a sports building should be provided.",{'ID': '177_UK_DocM_V2_AccessAndUseOfBuildings'},"in clothes shops, the dimensions and <e1>fittings</e1> <e2>recommended for an individual changing cubicle</e2> in a sports building should be provided.",selection,annotated
+ca1bbebb-fe4e-48d8-8cdf-eef13cd79ee9,The dwelling emission rate must not exceed the individual dwellings target emission rate.,{'ID': '65_UK_DocL_V1_ConsrvationOfFuelAndPower'},The dwelling emission rate must not exceed the individual <e1>dwellings</e1> <e2>target emission rate</e2>.,part-of,annotated
+d0b6759e-deec-451d-bd7a-ec65b96048be_4,,,"extract air of <e1>U-values</e1> <e2>900mm</e2> shall be conducted through individual ducts, or common ducts serving spaces of the same type as regards level of air purity, to the outdoors, into a collection duct installed above the spaces it serves or into an extract air chamber.",equal,synthetic
+5b1fe636-d2aa-4382-885e-a4f8a2cae4d4_7,,,"Generally, a thermal element once upgraded should not have a <e1>entrance level</e1> greater than <e2>15 degrees</e2>.",less-equal,synthetic
+4094b859-b3b4-4035-94cd-8cf47ccbd801_6,,,The <e1>fire performance</e1> is at least <e2>B</e2>.,greater-equal,synthetic
+ef4ec541-e1a7-47d4-9a83-94715d8900ba_10,,,"Where <e1>35 mg/m3 (30 ppm)</e1> or more <e2>bathroom</e2> are within a covered car park, the requirement to install electric vehicle charge points should be met by installing charge points in parking spaces that are not within a covered car park.",greater-equal,synthetic
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms <e1>in connection with saunas</e1>; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. <e2>car wash facility</e2>; 8. special facilities cleansed by water rinsing.",none,annotated
+e3128ebd-be79-48f2-93b5-7806c9a9026a,"Constructions  behind  surfaces  exposed  to  running  water,  repetitious splash water or water condensation must be waterproofed.",{'ID': '110_Finnish_Health-Humidity'},"<e1>Constructions</e1> behind surfaces exposed to running water, repetitious splash water or water condensation must be <e2>waterproofed</e2>.",necessity,annotated
+ca1e0369-2dfe-4cf2-8194-87f72ee5a633,"Vertical, horizontal and slinky ground arrays in particular should be flushed in both directions.",{'ID': '385_UK_DocL_V1_ConsrvationOfFuelAndPower'},"<e1>Vertical</e1>, horizontal and slinky <e2>ground arrays</e2> in particular should be flushed in both directions.",selection,annotated
+4e4fdf56-c45b-4d89-b18f-7a2f24a41ba9_11,,,"In spaces intended for more than 60 persons, the <e1>above</e1> of the access route must be at least <e2>400mm</e2>.",greater-equal,synthetic
+"8feaf7f2-dfd8-43ae-ab8d-791ee1ffd86c	However, if the elevation difference is no more than 1,000 millimetres, the ramp may not have a gradient of more than eight per cent.	{'ID': '9_Finnish_Accessibility'}_5",,,"However, if the <e1>cold side</e1> is no more than <e2>10 kN</e2>, the ramp may not have a gradient of more than eight per cent.",less-equal,synthetic
+73a6e4e0-c157-4cae-bc28-c0788f6a1e53,"Activation (e.g. motion sensors and push buttons), safety features and the time-lapse allowed for entry and exit through powered door systems should be carefully considered to suit the needs of people who cannot react quickly.",{'ID': '73_UK_DocM_V2_AccessAndUseOfBuildings'},"Activation (e.g. motion sensors and push buttons), safety features and the time-lapse allowed for entry and exit through <e1>powered</e1> door systems should be <e2>carefully considered to suit the needs of people who cannot react quickly</e2>.",none,annotated
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",{'ID': '75_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds <e1>7%</e1> of the <e2>total cost</e2> of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",part-of,annotated
+9dd2a0f1-0ff9-4416-8abd-1e6589980ff4_4,,,"If the <e1>air leakage rate figure</e1> of a mechanical ventilation systems air duct is designed to be greater than <e2>6m</e2>, the outdoor air and exhaust air ducts shall be fitted with shutoff dampers that close automatically when the system shuts down.",greater,synthetic
+0f67dad7-6df9-444b-8e72-f447668e3fde_5,,,"Where sanitary facilities are wheelchair accessible, WC pans should be a minimum of <e1>0.7 metres</e1> <e2>pitch</e2>.",greater-equal,synthetic
+bf798097-bb99-42d0-a73f-8cebab8fbeb8_6,,,"In the entrance halls and other indoor areas of administrative, service and business premises and in assembly areas, the <e1>alongside the leading edge</e1> of the steps must be no more than <e2>1,500  millimetres</e2> and the tread must be no less than 300 millimetres.",less-equal,synthetic
+7d35f4c4-fa65-4d68-a974-f54386ca8aee,"However, a horizontal gap in a protective part must be no higher than ten millimetres.",{'ID': '49_Finnish_SafetyOfUse'},"However, a horizontal <e1>gap</e1> in a <e2>protective part</e2> must be no higher than ten millimetres.",part-of,annotated
+1913381b-a2cc-496e-9168-82ccf2a01d50_2,,,"In connection with repair and alteration work, the heat emitters connected to the domestic hot water ring duct may be replaced so that the <e1>installed generation capacity</e1> of the heat emitters to be installed does not exceed <e2>1,200 MJ/m2</e2>.",less-equal,synthetic
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_10,,,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and <e1>55</e1> in <e2>relationship</e2>; however, the sum of these must be at least 1,500 millimetres.",greater-equal,synthetic
+11f2902d-29c2-474e-97d0-628a2a97a666_0,,,"<e1>CO2</e1> of over <e2>250 millimetres</e2> must be equipped with an appropriate safety barrier, railing or handrail.",greater,synthetic
+2fad9e0f-fa0d-4a6b-9c63-152ef8828c4d_4,,,An upstand built on site should not exceed a <e1>pressures</e1> of <e2>100</e2>.,less-equal,synthetic
+9d172d30-e92f-4151-865c-d204f217705d,The slope of the wet room floor must allow water to flow into the floor drain.,{'ID': '118_Finnish_Health-Humidity'},The <e1>slope</e1> of the wet room floor must <e2>allow water to flow into the floor drain</e2>.,necessity,annotated
+33ed3038-99a6-4b2d-906a-a1db21f2d898,"For heating systems in new dwellings, or when a heat generator such as a boiler is replaced in an existing dwelling, each room should be provided with thermostatic room controls.",{'ID': '250_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For heating systems in new dwellings, or when a heat generator such as a boiler is <e1>replaced</e1> in an existing dwelling, each <e2>room</e2> should be provided with thermostatic room controls.",none,annotated
+0638f810-16d0-4670-8870-4e7c78c5371f,Insulated cavity closers should be installed where appropriate.,{'ID': '419_UK_DocL_V1_ConsrvationOfFuelAndPower'},Insulated <e1>cavity closers</e1> should be <e2>installed where appropriate</e2>.,necessity,annotated
+164122ed-c7ac-4cf8-8a54-3d56c144f78d_0,,,"In general, the findings indicate that there should be at least the same number of <e1>ventilation systems</e1> as <e2>Spaces</e2> and for some building types, e.g. large retail buildings, at least twice as many.",greater-equal,synthetic
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",{'ID': '75_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a <e1>building</e1> is <e2>exempt from the requirement to install the electric vehicle charge point</e2>; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",necessity,annotated
+09b2a395-5293-4b7d-82d4-5312482d59e9_11,,,"Door entry controls, where provided, are mounted <e1>4</e1> <e2>Air permeability</e2> finished ground level, and at least 300mm away from any projecting corner.",equal,synthetic
+dcc583b1-8c4c-42cf-a1ed-e8907de56254,"The rise of the indoor steps of other spaces intended for everyday use may be no more than 180 millimetres, and the tread must be no less than 270 millimetres.",{'ID': '23_Finnish_SafetyOfUse'},"The <e1>rise</e1> of the indoor <e2>steps</e2> of other spaces intended for everyday use may be no more than 180 millimetres, and the tread must be no less than 270 millimetres.",part-of,annotated
+66b3628a-f0ee-4bc7-93c8-2ae0145a2e78,"In a room with no openable window, an intermittent extract fan should be provided with controls which continue to operate the fan for at least 15 minutes after the room is vacated.",{'ID': '83_UK_DocF_V1_Ventilation'},"In a <e1>room</e1> with no openable <e2>window</e2>, an intermittent extract fan should be provided with controls which continue to operate the fan for at least 15 minutes after the room is vacated.",not-part-of,annotated
+6414854d-01f9-481f-a7f4-c4581e48d8b1_10,,,Special safety features are not necessary if the <e1>Photographs</e1> is not more than <e2>16/01/2023 00:00</e2> long.,less-equal,synthetic
+0262f6e5-21bc-4312-9388-8ac93b79416d,The minimum full load EER of the absorption chillers should be no worse than 0.7.,{'ID': '285_UK_DocM_V2_AccessAndUseOfBuildings'},The <e1>minimum</e1> full <e2>load EER</e2> of the absorption chillers should be no worse than 0.7.,selection,annotated
+d5e2fb3e-df0c-48bd-8a09-734822ff086d,"For emergency repairs, if it is not possible to notify the building control body in advance, the building control body should be notified as soon as possible.",{'ID': '4_UK_DocF_V1_Ventilation'},"For <e1>emergency repairs</e1>, if it is <e2>not possible to notify the building control body in advance</e2>, the building control body should be notified as soon as possible.",selection,annotated
+a235c68f-ae44-4770-b005-4e9d7b659eb7_4,,,All cavity walls should have leaves at least <e1>one</e1> <e2>number of persons</e2> and cavities at least 50mm wide.,greater-equal,synthetic
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",{'ID': '75_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) <e1>cable routes</e1> for <e2>electric vehicle charge points</e2> must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",part-of,annotated
+b5aa20f2-571e-48d8-9943-4102c9f9bd1a,"In exit passageways and fire-compartmented elevator shafts, means must be arranged for both smoke extraction and flow of replacement air.",{'ID': '250_Finnish_FireSafety'},"In exit passageways and fire-compartmented elevator shafts, <e1>means</e1> must be arranged for both <e2>smoke extraction</e2> and flow of replacement air.",selection,annotated
+984c252b-74f4-4d85-9080-1c8ae1851eca_10,,,"If performance requires thicker glass to be used, an equivalent window unit with <e1>pitch</e1> (<e2>850 millimetres</e2>) glazing should be shown to meet the required standard.",equal,synthetic
+8805ec9f-3f5f-44fc-9078-3ae62439c973,"NOTE: When a single U-value is calculated for a product range of doors, the configuration of the door chosen for the calculation should be the worst performing in the product range.",{'ID': '108_UK_DocL_V1_ConsrvationOfFuelAndPower'},"NOTE: When a single <e1>U-value</e1> is <e2>calculated for a product range of doors</e2>, the configuration of the door chosen for the calculation should be the worst performing in the product range.",selection,annotated
+e874f337-2067-4e77-ad32-c3b857f40e7a_1,,,"If the <e1>location</e1> exceeds <e2>15mm</e2>, the total minimum width of the exits shall be calculated by increasing the original 1,200 millimetres by 400 millimetres for each additional group of 60 people.",greater,synthetic
+dae0db09-fd4b-4f2c-99c0-cd742b19d17a,"A glass structure or other light-permeable structure, along with its mountings, must withstand the load to which it is normally subject, unless the structure is protected by a fixed collision barrier.",{'ID': '68_Finnish_SafetyOfUse'},"A glass structure or other light-permeable structure, along with its mountings, must withstand the load to which it is normally subject, unless the <e1>structure</e1> is <e2>protected by a fixed collision barrier</e2>.",selection,annotated
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",{'ID': '75_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a <e1>building</e1> is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the <e2>cost</e2> of that installation exceeds 7% of the total cost of the major renovation.",none,annotated
+0365837b-a04d-4aaf-a2f5-2e89403a9c2b,"If all the terminals have to be set to a significantly closed position to achieve the required air flow rate, then the fan speed should be reduced and the terminals rebalanced.",{'ID': '200_UK_DocF_V1_Ventilation'},"If all the terminals have to be set to a significantly closed position to achieve the required air flow rate, then the fan <e1>speed</e1> should be reduced and the terminals <e2>rebalanced</e2>.",none,annotated
+81f14fc1-af5d-45e8-8725-94d2510e4701_7,,,"A dwelling that is intended for service housing or supported housing of a person with mobility and functional impairment shall, irrespective of the number of storeys in the building, have a turning space with a <e1>floor  plate areas</e1> of at least <e2>0.136kgCO2/kWh</e2> in the hallway and kitchen.",greater-equal,synthetic
+5b4380ba-0066-4735-a362-316d4c8e70b2_8,,,"Where a building undergoing major renovation, which is not a residential building or a mixeduse building, will have more than <e1>400-600mm</e1> <e2>Air pressure tests</e2> after the major renovation is completed (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.",greater,synthetic
+922bf8df-3a70-4f45-8c04-200b638d3b3c_0,,,The cold water pipe shall be designed and installed so that the <e1>axle group load</e1> in the cold water system may not exceed <e2>3</e2>.,less-equal,synthetic
+36650de0-ef3c-4fd1-8199-f47c0e576076_5,,,the <e1>number of occupants</e1> of the platform does not exceed <e2>35 mg/m3 (30 ppm)</e2>.,less-equal,synthetic
+86350df0-a40e-412b-a301-004524d56736,"For wet heating systems in new dwellings with a floor area of 150m2 or greater, a minimum of two independently controlled heating circuits should be provided.",{'ID': '246_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For <e1>wet</e1> <e2>heating systems</e2> in new dwellings with a floor area of 150m2 or greater, a minimum of two independently controlled heating circuits should be provided.",selection,annotated
+26980508-105c-49db-8595-bf001a48d757_11,,,"In <e1>connections</e1> with no fixed seats or <e2>air handling units</e2>, the number of persons shall be calculated to be two persons per square metre.",not-part-of,synthetic
+9618a274-45da-4e3e-87f0-21c2bfae4a8e_4,,,"A guardrail must be used at points with a <e1>primary energy factor</e1> of over <e2>50 millimetres</e2>, if these can be accessed by children.",greater,synthetic
+3153d771-404e-4a54-ac05-ed1b75e37506,"Gangways should not be less than 1100mm wide unless used by not more than 50 persons, in which case gangways should be a minimum of 900mm.",{'ID': '8_UK_DocK_ProtectionFromFalling'},"<e1>Gangways</e1> should not be less than 1100mm wide <e2>unless used by not more than 50 persons</e2>, in which case gangways should be a minimum of 900mm.",selection,annotated
+636bce88-fd3b-4e5a-9f6a-4aa0d3d1bfa4_6,,,"Where a new building contains more than <e1>65mm</e1> <e2>WC compartment doors</e2>, a common access point for a gigabit-capable public electronic communications network is required as a part of the buildings gigabit-ready physical infrastructure.",greater,synthetic
+6d9a1e8e-6fe7-4234-951a-96fdc4598bd7_3,,,"If parking spaces are provided for a building, an adequate number of <e1>public address</e1>, but at least <e2>0.9 metres</e2>, shall be intended for the use of a person with mobility and functional impairment.",greater-equal,synthetic
+2c224c59-366d-447f-9ecc-87c119c2db07,"For new dwellings, the commissioning plan should be given to the building control body with the design stage dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate calculations.",{'ID': '374_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For new dwellings, the <e1>commissioning plan</e1> should be <e2>given to the building control body with the design stage dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate calculations</e2>.",necessity,annotated
+2afa8bba-b5ad-4e12-bc27-4beea3fd09b2_11,,,The normal relationship between the <e1>cost</e1> of the rise and going is: <e2>90</e2> equals between 550mm and 700mm.,equal,synthetic
+993e54cc-49c3-43cb-995e-1a951c93c775_6,,,"When a warning sign is not posted, the areas shall be designed to an axle load Qk and also to an <e1>above</e1> equal to <e2>1100mm</e2>.",equal,synthetic
+fa90c179-d32c-412b-a7d6-a515cc91dbdb,The structure of the exterior wall against the ground must be waterproofed or isolated against water pressure or a structurally managed water removal system allowing the cellar wall to dry in an outward direction must be used to prevent moisture from the surrounding ground and storm water from penetrating the wall structure.,{'ID': '86_Finnish_Health-Humidity'},The structure of the exterior wall <e1>against the ground</e1> must be <e2>waterproofed</e2> or isolated against water pressure or a structurally managed water removal system allowing the cellar wall to dry in an outward direction must be used to prevent moisture from the surrounding ground and storm water from penetrating the wall structure.,none,annotated
+a5e9c36f-358f-4375-943c-6d5b89c82647,"Any abrupt level differences of over 0.7 metres and any precipices located in the vicinity of common play and recreation areas associated with buildings with more than two dwellings must be indicated by appropriate barriers or suitable planted areas, or outfitted with a base that cushions any fall.",{'ID': '92_Finnish_SafetyOfUse'},"Any abrupt level differences of over 0.7 metres and any <e1>precipices</e1> located in the vicinity of common play and recreation areas associated with buildings with more than two dwellings must be <e2>indicated by appropriate barriers or suitable planted areas</e2>, or outfitted with a base that cushions any fall.",necessity,annotated
+d342429e-d3fc-46e0-a195-527cfef1fd4b,"When an existing building with a total useful floor area of over 1000m2 is being extended or the habitable area is being increased, consequential improvements should be installed.",{'ID': '451_UK_DocM_V2_AccessAndUseOfBuildings'},"When an existing <e1>building</e1> with a total useful floor area of over <e2>1000m2</e2> is being extended or the habitable area is being increased, consequential improvements should be installed.",none,annotated
+b63dcef6-1840-4e9e-ad51-f8fc481fe856,"The wall ties should have a horizontal spacing of 900mm and a vertical spacing of 450mm, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",{'ID': '36_UK_DocA_Structure'},"The wall ties should have a horizontal spacing of 900mm and a vertical spacing of 450mm, or alternatively should be <e1>spaced</e1> such that the <e2>number of wall ties per square metre</e2> is not less than 2.5 ties/m2.",selection,annotated
+0cafda73-ee3a-4a99-a224-2d142de63618,"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",{'ID': '238_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a wet <e1>heating system</e1> is either: a. newly installed b. <e2>fully replaced</e2> in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",selection,annotated
+5e51b653-449e-4d00-be19-0e20ecff5c49_7,,,The default <e1>annual percentage of heat</e1> should be <e2>21 C</e2>.,equal,synthetic
+7e34700e-92de-4b00-a820-f4085a2e186c_0,,,"If the free gap between facing walls of adjacent glazed balconies or the <e1>Air permeability</e1> of the wall to the window of an adjacent fire compartment is less than <e2>1m2</e2>, the wall in question must be class EI 15.",less,synthetic
+a1f91cfd-21f8-49a4-8468-746f49f4848e,"For a building that contains more than one dwelling for example a block of flats or a terrace of houses an average target primary energy rate, target emission rate and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",{'ID': '50_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For a <e1>building</e1> that contains more than one dwelling for example a <e2>block of flats</e2> or a terrace of houses an average target primary energy rate, target emission rate and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",selection,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479_4,,,Individual flights are: for gradients up to 1:15 not more than <e1>Five ventilators</e1> <e2>primary energy</e2>; for gradients up to 1:12 not more than 5m long.,less-equal,synthetic
+72e7ed0c-9e73-46b2-a919-20f3fea337fd,"An area with a potentially flammable or explosive atmosphere must not be located in a building where there are dwellings, accommodation premises, institutions or assembly and business premises.",{'ID': '56_Finnish_FireSafety'},"An <e1>area</e1> with a <e2>potentially flammable</e2> or explosive atmosphere must not be located in a building where there are dwellings, accommodation premises, institutions or assembly and business premises.",none,annotated
+a387fcb8-ead2-4094-9be9-72d783468b33_11,,,"If the <e1>distance of the basement storey floor from the entry level</e1> of windows, roof windows, rooflights and doors exceeds <e2>50 m2</e2> of the total floor area of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",greater,synthetic
+e43c1e88-be80-42d9-944e-1bf0f0f82479_3,,,Individual flights are: for gradients up to 1:15 not more than 10m long; for <e1>category</e1> up to <e2>2 metres</e2> not more than 5m long.,less-equal,synthetic
+5ed671ca-0cd0-47e2-ad68-1d910e5ddbdf,The access route in the seating area or standing auditorium must be directly accessible from the end of each row.,{'ID': '114_Finnish_SafetyOfUse'},The <e1>access route</e1> in the <e2>seating area</e2> or standing auditorium must be directly accessible from the end of each row.,part-of,annotated
+86831830-e7f0-4b90-aa27-dc0542b7ba4d_7,,,"If a residential block of flats does not have a lift, the stairs between floor levels must have natural light and at least <e1>15 degrees</e1> <e2>from the inside face of the wall</e2>.",greater-equal,synthetic
+e43c1e88-be80-42d9-944e-1bf0f0f82479_6,,,Individual flights are: for gradients up to 1:15 not more than 10m long; for <e1>rated output</e1> up to <e2>150mm</e2> not more than 5m long.,less-equal,synthetic
+60205cf2-fa87-4195-9415-a6fb144a9b72,"Entrances and passageways to playgrounds and recreation areas used in the wintertime, as well as street areas surrounding the building and other public areas, must be protected from snow and ice falling from the roof of the building using snow barriers, taking into account the pitch of the roof.",{'ID': '96_Finnish_SafetyOfUse'},"Entrances and <e1>passageways</e1> to <e2>playgrounds</e2> and recreation areas used in the wintertime, as well as street areas surrounding the building and other public areas, must be protected from snow and ice falling from the roof of the building using snow barriers, taking into account the pitch of the roof.",part-of,annotated
+8151be81-09ad-4dac-b2d2-f0d757915b6c_10,,,"However, when the snow load can occur, the <e1>manufacturers declared efficiencies</e1> of the load s should be at least <e2>20 litres per second</e2>.",greater-equal,synthetic
+77f993c6-dff1-4f9a-8f66-73221d3cbaff_9,,,"If the dwelling only has one habitable room, a minimum <e1>capacity</e1> of <e2>One</e2> should be used.",greater-equal,synthetic
+0da52584-1b37-48b5-840f-3795ae695275_10,,,the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where <e1>off</e1> <e2>water removal system</e2> are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+6ec243f2-9294-4b7c-89a4-1c46e4a69cc9,"If site constraints necessitate an approach of 1:20 or steeper, an approach incorporating ramped access should be provided.",{'ID': '49_UK_DocM_V2_AccessAndUseOfBuildings'},"If <e1>site</e1> constraints necessitate an approach of 1:20 or steeper, an <e2>approach</e2> incorporating ramped access should be provided.",necessity,annotated
+7f696221-52c9-4c52-8f90-74bd93c51299,This grippable handrail is 850-1000mm above the pitch line of the flight and extends at least 300mm beyond the top and bottom nosings.,{'ID': '73_UK_DocM_V1_AccessAndUseOfBuildings'},This grippable handrail is 850-1000mm above the pitch line of the flight and <e1>extends</e1> at least <e2>300mm</e2> beyond the top and bottom nosings.,greater-equal,annotated
+2fad9e0f-fa0d-4a6b-9c63-152ef8828c4d_0,,,An upstand built on site should not exceed a <e1>power requirements</e1> of <e2>130 millimetres</e2>.,less-equal,synthetic
+4abb3268-3ba6-47e8-a8b7-4676dbaa9a16,"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide all means of escape routes with a minimum clear headroom of 2m, except in doorways.",{'ID': '28_UK_DocK_ProtectionFromFalling'},"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide all means of escape routes with a minimum clear <e1>headroom</e1> of <e2>2m</e2>, except in doorways.",equal,annotated
+d925c189-860a-4fcb-ae88-d1cf8cc14fb8_0,,,"The tread of steps in covered or heated outdoor staircases must be no less than 300 millimetres, and the <e1>away</e1> may be no more than <e2>65mm</e2>.",less-equal,synthetic
+2af8ee5f-9d05-4023-9365-d093ebdfba1f,"Where building work is carried out in a kitchen or bathroom, any existing fans (including cooker hoods, where they extract to the outside) should be retained or replaced.",{'ID': '168_UK_DocF_V1_Ventilation'},"Where building work is carried out in a kitchen or <e1>bathroom</e1>, any <e2>existing</e2> fans (including cooker hoods, where they extract to the outside) should be retained or replaced.",none,annotated
+5ddf9b8d-87fb-4fc4-9b38-4ff91008cfdf,The annual energy savings should be estimated using the Standard Assessment Procedure.,{'ID': '464_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>annual</e1> <e2>energy savings</e2> should be estimated using the Standard Assessment Procedure.,selection,annotated
+74002ed3-548e-4e2f-8835-be76e643c67d,NOTE 2: Double doors effectively provide nibs where each leaf is at least 300mm wide.,{'ID': '51_UK_DocM_V1_AccessAndUseOfBuildings'},NOTE 2: <e1>Double doors</e1> effectively provide <e2>nibs</e2> where each leaf is at least 300mm wide.,part-of,annotated
+2f8d4247-e53b-49ae-bd26-c4f1765eaee8_2,,,"Extract air of <e1>impact</e1> <e2>three</e2>, 3 and 4 shall not be used as recirculation air.",equal,synthetic
+8151be81-09ad-4dac-b2d2-f0d757915b6c_2,,,"However, when the snow load can occur, the <e1>tread</e1> of the load s should be at least <e2>15mm</e2>.",greater-equal,synthetic
+a090f6bb-f89b-44c1-b6ee-8e72e2be30a0,Where a system for on-site electricity generation is installed (a) reasonable provision must be made to ensure that (i) the system and its electrical output are appropriately sized for the site and available infrastructure; (ii) the system has effective controls; and (b) it must be commissioned by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.,{'ID': '370_UK_DocM_V2_AccessAndUseOfBuildings'},Where a system for on-site electricity generation is installed (a) reasonable provision must be made to ensure that (i) the system and its electrical output are appropriately sized for the site and available infrastructure; (ii) the <e1>system</e1> has <e2>effective controls</e2>; and (b) it must be commissioned by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.,selection,annotated
+fb1da22f-8ddb-4399-b441-64dca68da9af,"If a lift or other device for moving between levels is installed in the exit of an existing building, the dwellings exit may be no less than 850 millimetres wide.",{'ID': '218_Finnish_FireSafety'},"If a lift or other <e1>device</e1> for <e2>moving between levels</e2> is installed in the exit of an existing building, the dwellings exit may be no less than 850 millimetres wide.",selection,annotated
+0aaf71f0-a482-4a72-a407-0d6db79c7f6f,"In a building consisting primarily of one storey, no more than 200 m2 of fire-compartmented and no more than 50 m2 of non-fire-compartmented areas that essentially relate to the business of the building may be located on the level of second storey.",{'ID': '69_Finnish_FireSafety'},"In a <e1>building</e1> consisting primarily of one storey, no more than 200 m2 of fire-compartmented and no more than 50 m2 of non-fire-compartmented <e2>areas</e2> that essentially relate to the business of the building may be located on the level of second storey.",part-of,annotated
+46f5be2a-1514-420b-bc39-331fc6e0d2df_10,,,"The <e1>boiler type</e1>, dwelling emission rate and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the <e2>maintained</e2>, target emission rate and target fabric energy efficiency rate, respectively.",less-equal,synthetic
+13a437c0-918c-47f2-85bd-b80dd69eb027_5,,,"There are no <e1>mechanical ventilation</e1> on the <e2>reverberation time</e2> of display windows and similar glazing, but for new buildings their impact must be taken into account in the calculation of primary energy and CO2 emissions.",not-part-of,synthetic
+e874f337-2067-4e77-ad32-c3b857f40e7a_2,,,"If the <e1>horizontal spacing</e1> exceeds <e2>600kg/m3</e2>, the total minimum width of the exits shall be calculated by increasing the original 1,200 millimetres by 400 millimetres for each additional group of 60 people.",greater,synthetic
+113b8bf8-1856-45f5-a54b-d65ef100b437,"If a gas-fired combination boiler is installed in an existing dwelling, at least one of the following energy efficiency measures, appropriate to the system, should be installed.",{'ID': '262_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If a gas-fired combination boiler is installed in an existing dwelling, at least one of the following <e1>energy efficiency measures</e1>, <e2>appropriate to the system</e2>, should be installed.",selection,annotated
+eccc60e7-3d76-46c0-a9d9-e398bf3e475a,The part of the dwelling above ground level should be considered separately.,{'ID': '71_UK_DocF_V1_Ventilation'},The <e1>part</e1> of the <e2>dwelling</e2> above ground level should be considered separately.,part-of,annotated
+6a41a473-bd3c-4e38-a093-094b3fdae388_7,,,At least one in every <e1>10 kN</e1> remaining <e2>surfaces</e2> must be provided with cable routes.,equal,synthetic
+eefe1191-2903-4fb8-9138-6471e09fb67d,The internal temperature exceeds 23C at 11pm.,{'ID': '53_UK_DocO_Overheating'},The <e1>internal temperature</e1> exceeds 23C at <e2>11pm</e2>.,selection,annotated
+f420ae57-5656-4558-b1a3-1079e46bf6cc_10,,,"In the case of the storey-level door of a dwelling, or if the <e1>room temperature</e1> through the door exceeds <e2>18 dm3/s</e2>, doors must open in the direction of the exit.",greater,synthetic
+e32bbb47-c826-40c1-8ea4-8c32353d3fd2_1,,,There shall be <e1>8 per cent (1:12.5)</e1> of <e2>Waste water</e2> provided for people in the building.,equal,synthetic
+f420ae57-5656-4558-b1a3-1079e46bf6cc,"In the case of the storey-level door of a dwelling, or if the number of people evacuating through the door exceeds 60, doors must open in the direction of the exit.",{'ID': '223_Finnish_FireSafety'},"In the case of the storey-level door of a dwelling, or if the number of people evacuating through the <e1>door</e1> exceeds 60, doors must <e2>open in the direction of the exit</e2>.",none,annotated
+4f2b56cb-9852-4406-bbea-31f426fb4910,"replacing a heating system including the heating appliance, pipework and heat emitters), the energy performance of the whole system should be assessed, and the results documented and handed over to the building owner with the manufacturers supporting literature.",{'ID': '397_UK_DocM_V2_AccessAndUseOfBuildings'},"replacing a heating system including the heating appliance, pipework and heat emitters), the energy performance of the <e1>whole</e1> <e2>system</e2> should be assessed, and the results documented and handed over to the building owner with the manufacturers supporting literature.",selection,annotated
+079db365-cfed-474e-9329-25349ac0db4a_5,,,"In connection with the door of an outside space of an individual dwelling the <e1>building emission rate</e1> outside the door may be more than <e2>1.501kWhPE/kWh</e2> if the level difference can, with reasonable effort, be eliminated with equipment in the outdoor space.",greater,synthetic
+d9b8f957-49e3-45d0-83ca-c0419a50361a,"In a mechanical system, there shall be a clearly labelled stop switch, which shall be located in an easily accessible place.",{'ID': '48_Finnish_Health-IndoorClimateAndVentilation'},"In a mechanical system, there shall be a clearly labelled <e1>stop switch</e1>, which shall be <e2>located in an easily accessible place</e2>.",selection,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",{'ID': '83_Finnish_SafetyOfUse'},"The <e1>free</e1> <e2>opening</e2> of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",selection,annotated
+3e9fc57e-bc69-4f17-a056-dd7767afa9bb_7,,,"If the <e1>insulating performance</e1> of the building does not exceed <e2>2.5 ties/m2</e2>, access to the attic fire compartments from the outside shall be required.",less-equal,synthetic
+2c725d50-13d5-4e77-bacf-9f174530e27c,The energy efficiency of historic and traditional buildings should be improved only if doing so will not cause long-term deterioration of the buildings fabric or fittings.,{'ID': '17_UK_DocM_V2_AccessAndUseOfBuildings'},The energy efficiency of historic and traditional <e1>buildings</e1> should be <e2>improved only if doing so will not cause long-term deterioration of the buildings fabric or fittings</e2>.,none,annotated
+35cacecf-06dc-4b0f-aadb-db2ee05518c7_6,,,The area of windows and roof windows (but excluding display windows) <e1>cleansed by water rinsing</e1> exceeds <e2>230mm</e2> of the facade area.,greater,synthetic
+0cafda73-ee3a-4a99-a224-2d142de63618,"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",{'ID': '238_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a <e1>wet</e1> <e2>heating system</e2> is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",selection,annotated
+2f815a08-db3c-48a6-b248-d69aeac870ee_4,,,"the vertical <e1>rise</e1> is: a. not more than <e2>one per 100m2</e2>, where there is no liftway enclosure and no floor penetration; b. more than 2m, where there is a liftway enclosure.",less-equal,synthetic
+6187cad8-0d6d-4154-b98b-7285b36fea8d,Continuously running fans should be set up to operate without occupant intervention but may have manual or automatic controls for selecting the high rate of operation.,{'ID': '65_UK_DocF_V1_Ventilation'},<e1>Continuously running</e1> <e2>fans</e2> should be set up to operate without occupant intervention but may have manual or automatic controls for selecting the high rate of operation.,selection,annotated
+4a82f789-a98a-4379-9b81-2a20cfba6c87_1,,,"If the internal ties must be centred on the supporting line, the minimum value of the <e1>proportion of the cooling load relating to distribution pipework</e1>, <e2>600mm</e2>, will also be applied to internal ties.",greater-equal,synthetic
+38cd3221-7fc9-4462-be20-78b16a4309d3_3,,,The <e1>emission rate</e1> of openings in the newly created dwelling should not be more than <e2>150m2</e2> of the total floor area.,less-equal,synthetic
+793cb939-b3d9-46eb-ae65-71a4d5c8031b,Where the parking is within the private curtilage of the dwelling (but not within a carport or garage) at least one space is a standard parking bay that can be widened to 3.3m.,{'ID': '43_UK_DocM_V1_AccessAndUseOfBuildings'},Where the <e1>parking</e1> is within the private curtilage of the dwelling (but not within a carport or garage) <e2>at least one space is a standard parking bay</e2> that can be widened to 3.3m.,necessity,annotated
+bf798097-bb99-42d0-a73f-8cebab8fbeb8_11,,,"In the entrance halls and other indoor areas of administrative, service and business premises and in assembly areas, the <e1>load</e1> of the steps must be no more than <e2>20 millimetres</e2> and the tread must be no less than 300 millimetres.",less-equal,synthetic
+6414854d-01f9-481f-a7f4-c4581e48d8b1,Special safety features are not necessary if the ladder is not more than 6m long.,{'ID': '112_UK_DocK_ProtectionFromFalling'},Special <e1>safety features</e1> are not necessary if the ladder is not more than 6m <e2>long</e2>.,none,annotated
+493ec553-7761-4d1e-aa98-05d925ddf955_9,,,The <e1>layers</e1> of a horizontal hatch must be at least <e2>100mm</e2>.,greater-equal,synthetic
+7d1ada0b-8dcc-4c01-84d7-78b80cb404c9,"If there are not enough associated parking spaces outside of the covered car park to meet the requirement to install electric vehicle charge points, then cable routes should be installed for associated parking spaces within the covered car park.",{'ID': '58_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If there are not enough associated <e1>parking spaces</e1> <e2>outside of the covered car park</e2> to meet the requirement to install electric vehicle charge points, then cable routes should be installed for associated parking spaces within the covered car park.",selection,annotated
+bfdf95da-d422-47cd-83d7-a30a4969f2e6_7,,,"If the internal ties must be centred on the supporting line, the minimum value of the <e1>output</e1>, <e2>400mm</e2>, will also be applied to internal ties.",greater-equal,synthetic
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_6,,,"In buildings more than <e1>5m</e1> and at most 28 metres in <e2>heat emission capacity</e2>, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",greater,synthetic
+5e7d4831-4ec8-48f9-9e60-0422fcc1eae4,"When replacing an existing system, the installed generation capacity of the new system should be no less than that of the existing system, except where a smaller system can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",{'ID': '344_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When replacing an existing system, the <e1>installed generation capacity</e1> of the new <e2>system</e2> should be no less than that of the existing system, except where a smaller system can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",part-of,annotated
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3_3,,,"Where the <e1>surface temperature</e1> of installing only cable routes is more than <e2>EI 30</e2> of the total cost of the major renovation, there is no requirement to install either electric vehicle charge points or cable routes.",greater,synthetic
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3_9,,,"Where the cost of installing only cable routes is more than 7% of the total cost of the major <e1>platform</e1>, there is no <e2>towel rail</e2> to install either electric vehicle charge points or cable routes.",not-part-of,synthetic
+7f72632a-dc0a-4318-afd7-7090b42350fc,Mechanical supply terminals should be located and directed to avoid draughts.,{'ID': '106_UK_DocF_V1_Ventilation'},<e1>Mechanical</e1> <e2>supply terminals</e2> should be located and directed to avoid draughts.,selection,annotated
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new <e1>building</e1> as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. <e2>showers</e2> and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",none,annotated
+73b4b305-8971-489a-a290-f996e1f63e19,"The clear width of the door and opening leading to room spaces of a non-residential building as well as to residential rooms of a residential building, necessary spaces serving residence and spaces serving the use of the building shall be at least 800 millimetres.",{'ID': '19_Finnish_Accessibility'},"The clear <e1>width</e1> of the door and <e2>opening</e2> leading to room spaces of a non-residential building as well as to residential rooms of a residential building, necessary spaces serving residence and spaces serving the use of the building shall be at least 800 millimetres.",part-of,annotated
+46f5be2a-1514-420b-bc39-331fc6e0d2df_7,,,"The dwelling primary energy rate, dwelling emission rate and <e1>building emission rate</e1>, all calculated using the measured air permeability, must not be higher than the target primary energy rate, target emission rate and <e2>reverberation time</e2>, respectively.",less-equal,synthetic
+7c74b365-6fdd-494d-9675-3ae036c55348,Ladders and other structural elements at emergency exits and service routes must be designed and constructed so that they can also be used in an emergency situation.,{'ID': '82_Finnish_SafetyOfUse'},<e1>Ladders</e1> and other structural elements at emergency exits and service routes must be <e2>designed and constructed</e2> so that they can also be used in an emergency situation.,necessity,annotated
+ef4ec541-e1a7-47d4-9a83-94715d8900ba_6,,,"Where <e1>E</e1> or more <e2>balcony</e2> are within a covered car park, the requirement to install electric vehicle charge points should be met by installing charge points in parking spaces that are not within a covered car park.",greater-equal,synthetic
+43a7a088-718f-4a11-a392-88e71559466e,"In exceptional circumstances in an existing building, a wheelchair platform stairlift may be considered, provided its installation does not conflict with requirements for means of escape.",{'ID': '107_UK_DocM_V2_AccessAndUseOfBuildings'},"In exceptional circumstances in an <e1>existing</e1> <e2>building</e2>, a wheelchair platform stairlift may be considered, provided its installation does not conflict with requirements for means of escape.",selection,annotated
+a86b58e8-046f-44b7-8e1b-00c876c8c647_2,,,"Parapets in <e1>going</e1> A to <e2>1000m2</e2> and panel parts of walls acting as parapets, as well as their fasteners, shall be designed to the concentrated load Qk = 0.3 kN acting on a random spot.",less-equal,synthetic
+46f5be2a-1514-420b-bc39-331fc6e0d2df_7,,,"The <e1>sunken area</e1>, dwelling emission rate and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the <e2>product certificate</e2>, target emission rate and target fabric energy efficiency rate, respectively.",less-equal,synthetic
+05864826-21ef-4ae7-9af8-2aaeffc7267a,Modular and portable buildings with a planned service life of more than two years but with an intended time of use in a single location of less than two years should be shown to comply with the energy efficiency requirements.,{'ID': '83_UK_DocM_V2_AccessAndUseOfBuildings'},Modular and portable buildings with a <e1>planned</e1> <e2>service life</e2> of more than two years but with an intended time of use in a single location of less than two years should be shown to comply with the energy efficiency requirements.,selection,annotated
+d791b3d9-ff45-46d6-90d4-39fdaf9d0879,Lighting should be designed based on CIBSEs SLL Lighting Handbook or an equivalent design guide.,{'ID': '310_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Lighting</e1> should be <e2>designed based on CIBSEs SLL Lighting Handbook or an equivalent design guide</e2>.,necessity,annotated
+d3fc8c9b-c23a-4188-8723-369caa90453c,"The reference value for a building's total combined window area is 15 of the sum total of the floor  plate areas  of  the  buildings  storeys that  are  fully  or in  part  above  the  ground  but, however, at most 50 of the building's facade area.",{'ID': '124_Finnish_EnergyEfficiency'},"The reference value for a <e1>building's</e1> total combined window area is 15 of the sum total of the floor plate areas of the <e2>buildings</e2> storeys that are fully or in part above the ground but, however, at most 50 of the building's facade area.",none,annotated
+72e7ed0c-9e73-46b2-a919-20f3fea337fd_7,,,"An <e1>residential unit</e1> with a potentially flammable or explosive atmosphere must not be located in a <e2>detrimental physical or chemical substances</e2> where there are dwellings, accommodation premises, institutions or assembly and business premises.",not-part-of,synthetic
+6d9a1e8e-6fe7-4234-951a-96fdc4598bd7_9,,,"If parking spaces are provided for a building, an adequate number of <e1>Humus soil</e1>, but at least <e2>1.2W/(m2K)</e2>, shall be intended for the use of a person with mobility and functional impairment.",greater-equal,synthetic
+ec419055-6ed3-4dac-9879-748e2d365a26,"Internal building services: where services penetrate the air barrier, holes should be as small as possible and should be core drilled to limit damage.",{'ID': '180_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Internal <e1>building services</e1>: where services penetrate the air barrier, <e2>holes</e2> should be as small as possible and should be core drilled to limit damage.",none,annotated
+99a53f17-48cb-4012-a47b-700761e0983b_8,,,Where a new building which is not a residential building or a mixed-use building has more than <e1>100</e1> <e2>enduse categories</e2> (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,greater,synthetic
+86831830-e7f0-4b90-aa27-dc0542b7ba4d,"If a residential block of flats does not have a lift, the stairs between floor levels must have natural light and at least one intermediate landing.",{'ID': '18_Finnish_SafetyOfUse'},"If a residential block of flats does not have a lift, the <e1>stairs</e1> <e2>between floor levels</e2> must have natural light and at least one intermediate landing.",selection,annotated
+29232335-402c-4ed9-af74-fd093ac22e28_8,,,The natural or mechanical ventilation system of a building shall be strong and its air-tightness shall be at least <e1>fittings</e1> <e2>20</e2>.,greater-equal,synthetic
+aca1acce-65c1-4677-a979-ce2920457a55,The surface of stairs the must not be slippery.,{'ID': '14_Finnish_SafetyOfUse'},The <e1>surface</e1> of stairs the must <e2>not be slippery</e2>.,necessity,annotated
+9ebe07e9-8381-451a-9ab8-701912478b30,The air flow rate of all mechanical ventilation fans should be tested.,{'ID': '210_UK_DocF_V1_Ventilation'},The <e1>air flow rate</e1> of all mechanical <e2>ventilation fans</e2> should be tested.,part-of,annotated
+6414854d-01f9-481f-a7f4-c4581e48d8b1,Special safety features are not necessary if the ladder is not more than 6m long.,{'ID': '112_UK_DocK_ProtectionFromFalling'},<e1>Special</e1> safety features are not necessary if the ladder is not more than 6m <e2>long</e2>.,none,annotated
+371e1755-8bb5-456e-bf66-5a50f4c19d59,"Where there is full-height structural guarding, if you provide a second (lower) handrail, the vertical height from the pitch line of the steps (or the surface of the ramp) to the top of the second (lower) handrail should be 600mm.",{'ID': '50_UK_DocK_ProtectionFromFalling'},"Where there is <e1>full-height structural</e1> guarding, if you provide a second (lower) handrail, the vertical height <e2>from the pitch line of the steps (or the surface of the ramp) to the top of the second (lower) handrail</e2> should be 600mm.",none,annotated
+f41fb8da-16bd-4404-accb-e32727f3736a,"Windows, glass walls and glass doors into which there is a danger of collision must be marked in such a way that they can be easily noticed.",{'ID': '69_Finnish_SafetyOfUse'},"<e1>Windows</e1>, <e2>glass</e2> walls and glass doors into which there is a danger of collision must be marked in such a way that they can be easily noticed.",none,annotated
+cf152151-90f9-47d0-9e4e-5a1cd813d4e5,System controls should be wired so that when there is no demand for space heating or hot water the heating appliance and pump are switched off.,{'ID': '247_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>System controls</e1> should be <e2>wired</e2> so that when there is no demand for space heating or hot water the heating appliance and pump are switched off.,necessity,annotated
+a235c68f-ae44-4770-b005-4e9d7b659eb7_0,,,All cavity walls should have leaves at least <e1>2.2 metres</e1> <e2>gradients</e2> and cavities at least 50mm wide.,greater-equal,synthetic
+ddf21ce1-bd2a-49f5-8ba6-d2bcb5edf575,Taps should be lever operated and capable of easy operation.,{'ID': '97_UK_DocM_V1_AccessAndUseOfBuildings'},<e1>Taps</e1> should be <e2>lever operated</e2> and capable of easy operation.,necessity,annotated
+9b908e68-0f92-4883-9fd2-7fe013848b15,"Where a gas combination boiler is used, the boiler type should be selected to modulate down to the typical heating load of the dwelling.",{'ID': '237_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a gas combination boiler is used, the <e1>boiler type</e1> should be <e2>selected to modulate down to the typical heating load</e2> of the dwelling.",necessity,annotated
+9952f64d-e0df-4b03-84af-150782f81387,"For mobility-impaired people, a going of at least 300mm is preferred.",{'ID': '124_UK_DocM_V2_AccessAndUseOfBuildings'},"For <e1>mobility-impaired</e1> people, a going of at least <e2>300mm</e2> is preferred.",none,annotated
+9415ae4b-7a74-4c70-a245-e4381c6d71bf_8,,,"At gables and party walls, insulation should extend to the wall; if the <e1>private curtilage</e1> between the wall and joist is less than <e2>600 millimetres</e2>, perimeter insulation may be required.",less,synthetic
+f0c72b35-5a0a-4554-8713-96f6f73a67f1_8,,,A cube with <e1>maximum capacity</e1> of no more than <e2>16/01/2023 00:00</e2> may pass between the lower edge of a barriers protective part and the landing or the upper surface or edge of a step.,less-equal,synthetic
+81314489-dcd9-410f-9b15-595b87e7c8f9,"The resilient layer should be timber sheathing at least 9mm thick, expanded metal or a similar resilient material.",{'ID': '14_UK_DocQ_Security_Dwellings'},"The <e1>resilient layer</e1> should be timber sheathing at least 9mm thick, expanded metal or a similar <e2>resilient material</e2>.",necessity,annotated
+85745724-aa09-4cdd-ad17-3c50ea2b99a1,"Where sanitary facilities are wheelchair accessible, basins and sinks should be wall hung (typically with their rim 770-850mm above finished floor level) and the clear zone beneath basins, services and pedestals is maximised to enable wheelchair users to approach.",{'ID': '105_UK_DocM_V1_AccessAndUseOfBuildings'},"Where <e1>sanitary facilities</e1> are wheelchair accessible, basins and <e2>sinks</e2> should be wall hung (typically with their rim 770-850mm above finished floor level) and the clear zone beneath basins, services and pedestals is maximised to enable wheelchair users to approach.",part-of,annotated
+6ec243f2-9294-4b7c-89a4-1c46e4a69cc9_3,,,"If site constraints necessitate an <e1>Wheelchair users</e1> of <e2>9mm</e2> or steeper, an approach incorporating ramped access should be provided.",greater-equal,synthetic
+32dec356-9315-4ea6-9213-86ad0a72802b,Drawings should be reviewed by the designer and installer and should include specifications for key materials.,{'ID': '177_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Drawings</e1> should be reviewed by the designer and installer and should <e2>include specifications for key materials</e2>.,necessity,annotated
+1fc9255c-929e-4052-aaec-e3ffede5a62e,"For large or complex projects, a commissioning manager should be appointed.",{'ID': '374_UK_DocM_V2_AccessAndUseOfBuildings'},"For <e1>large</e1> or complex <e2>projects</e2>, a commissioning manager should be appointed.",selection,annotated
+72e7ed0c-9e73-46b2-a919-20f3fea337fd_10,,,"An <e1>Fixings</e1> with a potentially flammable or explosive atmosphere must not be located in a <e2>terraces</e2> where there are dwellings, accommodation premises, institutions or assembly and business premises.",not-part-of,synthetic
+6d9a1e8e-6fe7-4234-951a-96fdc4598bd7_10,,,"If parking spaces are provided for a building, an adequate number of <e1>hearing enhancement</e1>, but at least <e2>30m2</e2>, shall be intended for the use of a person with mobility and functional impairment.",greater-equal,synthetic
+84cd76d7-e5d0-4f39-94bc-0236c65d533a,"in residential buildings of not more than two storeys, one exit of no less than 900 millimetres in width is permitted.",{'ID': '217_Finnish_FireSafety'},"in <e1>residential buildings</e1> of not more than two storeys, one <e2>exit</e2> of no less than 900 millimetres in width is permitted.",part-of,annotated
+29232335-402c-4ed9-af74-fd093ac22e28,The natural or mechanical ventilation system of a building shall be strong and its air-tightness shall be at least class B.,{'ID': '95_Finnish_Health-IndoorClimateAndVentilation'},The natural or mechanical ventilation system of a <e1>building</e1> shall be strong and its <e2>air-tightness</e2> shall be at least class B.,none,annotated
+8cef7dc5-2d76-4dd8-80c5-6861b11a8f6f_2,,,"Where the work concerns a building containing more than <e1>900-1000mm</e1> <e2>property</e2>, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",greater-equal,synthetic
+5ba5ffe7-ece8-488a-b461-da66237e7888,"All walls, ducts and boxings to the WC/cloakroom, bathroom and shower room should be strong enough to support grab rails, seats and other adaptations that could impose a load of up to 1.5kN/m2.",{'ID': '54_UK_DocM_V1_AccessAndUseOfBuildings'},"All <e1>walls</e1>, ducts and boxings to the WC/cloakroom, bathroom and shower room should be <e2>strong enough to support grab rails, seats and other adaptations that could impose a load of up to 1.5kN/m2</e2>.",necessity,annotated
+7f696221-52c9-4c52-8f90-74bd93c51299_0,,,This grippable handrail is 850-1000mm above the pitch line of the flight and <e1>design value</e1> at least <e2>7 mg/m3 (6 ppm)</e2> beyond the top and bottom nosings.,greater-equal,synthetic
+3ac96918-764f-403d-a588-37b5f4a16f46,"For absorption chillers used in conjunction with onsite CHP or a district heat network or community heating system, the CO2 emissions and primary energy should be calculated in the same way as when using CHP for heating.",{'ID': '284_UK_DocM_V2_AccessAndUseOfBuildings'},"For <e1>absorption chillers</e1> used in conjunction with onsite CHP or a district heat network or community heating system, the CO2 emissions and <e2>primary energy</e2> should be calculated in the same way as when using CHP for heating.",part-of,annotated
+f7935bb4-9e5f-4e91-bbf1-54e45c1ef24c_7,,,A building with a <e1>visual contrast</e1> exceeding <e2>90</e2> must be equipped with anchoring structures for safety lines.,greater,synthetic
+4e8c5c50-44af-48f6-b959-e6f9b31afa1e,"If the planned time of use of a modular or portable building in a single location is less than two years, the only practical heating technology may be electric resistance heating.",{'ID': '89_UK_DocM_V2_AccessAndUseOfBuildings'},"If the planned time of use of a <e1>modular</e1> or portable <e2>building</e2> in a single location is less than two years, the only practical heating technology may be electric resistance heating.",selection,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_4,,,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under <e1>total extract air flow</e1> <e2>two</e2>.",equal,synthetic
+66b3628a-f0ee-4bc7-93c8-2ae0145a2e78_2,,,"In a <e1>cooling energy</e1> with no openable <e2>wet room</e2>, an intermittent extract fan should be provided with controls which continue to operate the fan for at least 15 minutes after the room is vacated.",not-part-of,synthetic
+2cc3d5b0-d3b4-45f2-a00d-838fd3f9abbb_7,,,"There should be a <e1>Provision</e1>, in the absence of tobacco smoke or other excessive pollutants, of <e2>400kg</e2>.",equal,synthetic
+8207751f-13b8-4fe3-9bfe-4423093d4905_7,,,A building with dwellings or accommodation or patient rooms shall be designed and implemented so that the <e1>maximum number of occupants</e1> of the staircase and exit route is no more than <e2>two </e2>.,less-equal,synthetic
+8c4a09c5-1eb2-4a41-86d9-b69c031b4592,Ground arrays including header pipes and manifolds should be flushed as one system to remove all debris and purged to remove all air.,{'ID': '384_UK_DocL_V1_ConsrvationOfFuelAndPower'},Ground arrays including header pipes and <e1>manifolds</e1> should be <e2>flushed as one system to remove all debris and purged to remove all air</e2>.,necessity,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_5,,,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and <e1>15 degrees</e1> in <e2>rise</e2>; however, the sum of these must be at least 1,500 millimetres.",greater-equal,synthetic
+a8b3e54e-902c-4502-99a2-8c41d46f1416_10,,,"If there are more than <e1>3m</e1> <e2>dwelling</e2> in a space, they must be linked to one another in at least four groups, unless the chairs are placed around tables.",greater,synthetic
+e43c1e88-be80-42d9-944e-1bf0f0f82479_9,,,Individual flights are: for gradients up to 1:15 not more than 10m long; for <e1>total useful floor area</e1> up to <e2>adequate number</e2> not more than 5m long.,less-equal,synthetic
+8fcdc238-3c30-4659-9303-1b126a39b2cd_1,,,The design solar load should be <e1>link details as used in the actual building</e1> by at least <e2>20 points</e2>.,greater-equal,synthetic
+082c7ed9-3579-48c2-a0d2-076f1edd647c_4,,,"Each of the <e1>50</e1> <e2>fire resistance time</e2> of the centrally hinged window should be assessed as a single side, bottom or top hung window.",equal,synthetic
+d8a06af7-3a6b-4d68-8bba-342aac6d3ac0,Water pipes and sewers installed in the ground shall be identifiable and they shall be located separate from one another.,{'ID': '146_Finnish_Health-WaterAndSewerage'},<e1>Water pipes</e1> and sewers installed in the ground shall be <e2>identifiable</e2> and they shall be located separate from one another.,necessity,annotated
+aa41a5d4-c0b1-4da7-84a0-5c2e2738654f,The total number of ventilators installed in the dwellings habitable rooms and kitchens should be at least the following: Five ventilators if the dwelling has more than one bedroom.,{'ID': '89_UK_DocF_V1_Ventilation'},The <e1>total number of ventilators</e1> installed in the dwellings <e2>habitable rooms</e2> and kitchens should be at least the following: Five ventilators if the dwelling has more than one bedroom.,part-of,annotated
+f009a781-0ced-408d-b3d1-6ae7a848012e,"The landings in the indoor and outdoor areas of a building must be safe, sufficiently spacious and suitable for their purpose.",{'ID': '31_Finnish_SafetyOfUse'},"The <e1>landings</e1> in the indoor and outdoor areas of a building must be <e2>safe</e2>, sufficiently spacious and suitable for their purpose.",necessity,annotated
+7575211d-616b-42bb-b112-73a949e7ca6a,Any combined facility should be divided into distinct wet and dry areas.,{'ID': '176_UK_DocM_V2_AccessAndUseOfBuildings'},Any <e1>combined</e1> <e2>facility</e2> should be divided into distinct wet and dry areas.,selection,annotated
+a43037b0-8e35-45a2-9f23-c2d65f6c5a64,"Where access to the dwelling can be gained via an interconnecting doorset from the garage, then either the garage doorset (pedestrian and vehicular) or the interconnecting doorset should be a secure doorset.",{'ID': '8_UK_DocQ_Security_Dwellings'},"Where access to the dwelling can be gained via an interconnecting doorset from the garage, then either the <e1>garage doorset</e1> (pedestrian and vehicular) or the <e2>interconnecting doorset</e2> should be a secure doorset.",none,annotated
+eccd4f77-ef4a-41fd-a22a-620c84fdddd4,There is a minimum of 400mm of worktop to at least one side of the oven and fridge or fridge freezer where this is taller than the worktop height (or to one side of a pair of tall appliances where they are located together at the end of a run).,{'ID': '98_UK_DocM_V1_AccessAndUseOfBuildings'},There is a minimum of <e1>400mm</e1> of worktop to at least <e2>one side</e2> of the oven and fridge or fridge freezer where this is taller than the worktop height (or to one side of a pair of tall appliances where they are located together at the end of a run).,greater-equal,annotated
+20518e80-6f7e-457f-8c5a-59fa4c0eb324_10,,,"When calculating the heat loss for a buildings design solution, the <e1>inaccuracies</e1> shall be used as the value of the <e2>number of wall ties per square metre</e2> for the building envelope.",equal,synthetic
+e4fb8d18-8dbc-4351-a2df-d87f880f476a_6,,,The <e1>Air flow rates</e1> for balconies is <e2>280mm</e2> that of the load-bearing structures of the storey.,equal,synthetic
+bb9ec292-062b-43c3-8590-856dd5f6b890_4,,,"The <e1>quality of the installation</e1> and building emission rate calculated using the measured air permeability must not be higher than the <e2>glare and reflections</e2> and target emission rate, respectively.",less-equal,synthetic
+009e12eb-db83-485c-9ffc-e1f462251109_1,,,Each air terminal should have a <e1>gap</e1> of at least <e2>400kg</e2> of the free area of its associated duct.,greater-equal,synthetic
+d0927095-9e43-4ce4-a740-d5df69dc1dc3,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",{'ID': '84_Finnish_Health-IndoorClimateAndVentilation'},"If the <e1>air flows</e1> of <e2>extract air categories</e2> 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",part-of,annotated
+2ca092ec-4425-4552-a389-fd0dadfbd154_1,,,NOTE: A floor level with a <e1>Control</e1> of <e2>50 millimetres</e2> or steeper should be designed as a ramp.,greater-equal,synthetic
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_5,,,Skirtings totalling up to 50mm total thickness and shallow projecting ducts or <e1>ventilation  system</e1> above <e2>EI 15</e2> may be discounted when measuring clear width.,greater,synthetic
+2f89cb06-3ee9-49b5-ac36-46f31ae3928f,Hot water pipework should be insulated in all areas inside and outside the building unless it can be demonstrated that the heat is always useful.,{'ID': '170_UK_DocM_V2_AccessAndUseOfBuildings'},Hot water pipework should be insulated in all <e1>areas</e1> inside and <e2>outside</e2> the building unless it can be demonstrated that the heat is always useful.,selection,annotated
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_3,,,Skirtings totalling up to 50mm total thickness and shallow projecting ducts or <e1>Air flows</e1> above <e2>900-1000mm</e2> may be discounted when measuring clear width.,greater,synthetic
+0cfe8c0e-45e4-4c4c-bf9b-906e26e28c75,"There should be sufficient space for people to approach the building, pass others who are travelling in the opposite direction and carry out all necessary manoeuvres.",{'ID': '43_UK_DocM_V2_AccessAndUseOfBuildings'},"There should be sufficient space for people to approach the building, <e1>pass others who are travelling in the opposite direction</e1> and <e2>carry out all necessary manoeuvres</e2>.",none,annotated
+7f3f59a4-fc7e-4b14-8074-384f6cacf548_11,,,"The <e1>alongside the leading edge</e1> of a barrier in a dwellings indoor areas may, however, be at least <e2>270 millimetres</e2> if the drop is less than three metres.",greater-equal,synthetic
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3_1,,,"Where the <e1>minimum value</e1> of installing only cable routes is more than <e2>50 m2</e2> of the total cost of the major renovation, there is no requirement to install either electric vehicle charge points or cable routes.",greater,synthetic
+f6add908-4d45-4b3e-83a6-369f6c36c037_3,,,"Door rails, stiles and muntins should be at least <e1>100mm</e1> <e2>Control</e2>.",greater-equal,synthetic
+2f0f22aa-06d3-478d-a777-5aca5c2fb5c1,"For sliding doors and gates, provide both of the following: (i) a stop or other effective means to prevent them coming off the end of the track; (ii) a retaining rail to prevent doors and gates falling if the suspension system fails or the rollers leave the track.",{'ID': '120_UK_DocK_ProtectionFromFalling'},"For sliding doors and <e1>gates</e1>, provide both of the following: (i) a stop or other effective means to prevent them coming off the end of the track; (ii) a <e2>retaining rail</e2> to prevent doors and gates falling if the suspension system fails or the rollers leave the track.",necessity,annotated
+23db27ac-b594-4b26-883d-922d713d382a,"When installing or renovating thermal elements, the element being installed should be draught-proofed and airleakage gaps should be filled.",{'ID': '161_UK_DocM_V2_AccessAndUseOfBuildings'},"When installing or <e1>renovating</e1> <e2>thermal elements</e2>, the element being installed should be draught-proofed and airleakage gaps should be filled.",selection,annotated
+13a437c0-918c-47f2-85bd-b80dd69eb027_4,,,"There are no <e1>energy efficiency</e1> on the <e2>fire resistance time requirement</e2> of display windows and similar glazing, but for new buildings their impact must be taken into account in the calculation of primary energy and CO2 emissions.",not-part-of,synthetic
+f3bd99b4-7ea5-4968-af10-3c133c0b5aa0_4,,,No individual flight has a <e1>service life</e1> of more than <e2>75 light source lumens per circuit-watt</e2>.,less-equal,synthetic
+7a42150c-1f5d-449c-ac83-addfe816e46a,Accessible entrances should be clearly sign-posted and easily recognisable.,{'ID': '62_UK_DocM_V2_AccessAndUseOfBuildings'},Accessible <e1>entrances</e1> should be clearly sign-posted and <e2>easily recognisable</e2>.,necessity,annotated
+e3b85ad6-6132-40d7-86f8-3cc5d44eb12c_8,,,<e1>2.0 m3/(h m2)</e1> <e2>stairs</e2> should be close to an accessible bathroom suitable for a wheelchair user.,equal,synthetic
+7577d9f7-9f3c-4d3b-b8d9-da31d3e1b201,"For example, glare and reflections from shiny surfaces, and large repeating patterns, should be avoided in spaces where visual acuity is critical as they will hamper communication for people with impaired vision, and those who lip read or use sign language.",{'ID': '150_UK_DocM_V2_AccessAndUseOfBuildings'},"For example, glare and reflections from shiny surfaces, and <e1>large</e1> repeating <e2>patterns</e2>, should be avoided in spaces where visual acuity is critical as they will hamper communication for people with impaired vision, and those who lip read or use sign language.",selection,annotated
+53b7d989-c81f-4e01-a5ec-4b2cb30b4bfa,The size of a fire compartment must be limited so that a fire igniting in the compartment does not cause unreasonably vast damages (compartmentation by area).,{'ID': '104_Finnish_FireSafety'},The size of a fire compartment must be limited so that a <e1>fire igniting</e1> in the compartment does <e2>not cause unreasonably vast damages (compartmentation by area)</e2>.,selection,annotated
+5869233a-4fc0-48bf-9007-2b0c9a169fef,"A building shall, if its size, number of storeys or an intended purpose of a premises within the building so requires, be divided into fire compartments in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",{'ID': '100_Finnish_FireSafety'},"A building shall, if <e1>its</e1> <e2>size</e2>, number of storeys or an intended purpose of a premises within the building so requires, be divided into fire compartments in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",part-of,annotated
+dcc583b1-8c4c-42cf-a1ed-e8907de56254_1,,,"The <e1>air extract rate</e1> of the indoor steps of other spaces intended for everyday use may be no more than <e2>25W/m2</e2>, and the tread must be no less than 270 millimetres.",less-equal,synthetic
+35af73f1-53c7-4377-9da0-acf99eef4d8e,"WC compartment doors, and doors to wheelchair-accessible unisex toilets, changing rooms or shower rooms have an emergency release mechanism so that they are capable of being opened outwards, from the outside , in case of emergency.",{'ID': '159_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>WC compartment doors</e1>, and doors to wheelchair-accessible unisex toilets, changing rooms or shower rooms <e2>have an emergency release mechanism so that they are capable of being opened outwards, from the outside , in case of emergency</e2>.",necessity,annotated
+ca1e0369-2dfe-4cf2-8194-87f72ee5a633,"Vertical, horizontal and slinky ground arrays in particular should be flushed in both directions.",{'ID': '385_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Vertical, <e1>horizontal</e1> and slinky <e2>ground arrays</e2> in particular should be flushed in both directions.",selection,annotated
+56166e36-b14b-4632-9767-70b71d335d9c,"When a dwelling undergoes a major renovation, the technical, environmental and economic feasibility of installing high-efficiency alternative systems should be considered.",{'ID': '98_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When a dwelling <e1>undergoes a major renovation</e1>, the technical, environmental and economic <e2>feasibility of installing high-efficiency alternative systems</e2> should be considered.",none,annotated
+2f8d4247-e53b-49ae-bd26-c4f1765eaee8,"Extract air of categories 2, 3 and 4 shall not be used as recirculation air.",{'ID': '73_Finnish_Health-IndoorClimateAndVentilation'},"Extract air of <e1>categories</e1> <e2>2</e2>, 3 and 4 shall not be used as recirculation air.",equal,annotated
+df122091-ca53-4134-98a3-47779c06f9df,The index terminal flow rate should be set with the terminal fully open and all other terminals should be adjusted to achieve the required flows at each terminal.,{'ID': '198_UK_DocF_V1_Ventilation'},The index terminal <e1>flow rate</e1> should be set with the terminal fully open and all <e2>other</e2> terminals should be adjusted to achieve the required flows at each terminal.,none,annotated
+103f99ad-884b-4bae-9f22-ccb1c5bc3d26_10,,,"In an open garage of no more than <e1>100 litres</e1> <e2>bath</e2>, the maximum area may be used as the surface area of the storeys, even though the driveways between the various storeys are combined.",less-equal,synthetic
+8efb6108-e49e-4d64-a1e4-22e3f9128b17_1,,,"When calculating the reference heat loss of a building, the value of <e1>120</e1> shall be used as the <e2>thresholds</e2> for the air leakage rate figure for the building envelope.",equal,synthetic
+19478a13-7457-4dd3-a394-744f826db7b0,"The handle to at least one window in the principal living area is 700-1000mm above floor level, unless fitted with a remote opening device that is within this height range.",{'ID': '127_UK_DocM_V1_AccessAndUseOfBuildings'},"The handle to at least one window in the <e1>principal</e1> <e2>living area</e2> is 700-1000mm above floor level, unless fitted with a remote opening device that is within this height range.",selection,annotated
+f3bd99b4-7ea5-4968-af10-3c133c0b5aa0_5,,,No individual flight has a <e1>sum total</e1> of more than <e2>0.8 metres</e2>.,less-equal,synthetic
+99a53f17-48cb-4012-a47b-700761e0983b,Where a new building which is not a residential building or a mixed-use building has more than 10 parking spaces (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,{'ID': '61_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},Where a <e1>new</e1> <e2>building</e2> which is not a residential building or a mixed-use building has more than 10 parking spaces (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,selection,annotated
+4470dde4-6422-4c13-9781-de68c3e075dc_11,,,"The outdoor <e1>internal temperature</e1> of a dwelling unit, however, shall be designed to be a minimum of <e2>1</e2>.",greater-equal,synthetic
+bf798097-bb99-42d0-a73f-8cebab8fbeb8,"In the entrance halls and other indoor areas of administrative, service and business premises and in assembly areas, the riser of the steps must be no more than 160 millimetres and the tread must be no less than 300 millimetres.",{'ID': '21_Finnish_SafetyOfUse'},"In the entrance halls and other indoor areas of administrative, service and business premises and in <e1>assembly areas</e1>, the riser of the <e2>steps</e2> must be no more than 160 millimetres and the tread must be no less than 300 millimetres.",part-of,annotated
+38cd3221-7fc9-4462-be20-78b16a4309d3_4,,,"The <e1>energy efficiency</e1> of openings in the newly created dwelling should not be more than <e2>1,200 millimetres</e2> of the total floor area.",less-equal,synthetic
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3_10,,,"Where the cost of installing only cable routes is more than 7% of the total cost of the major <e1>Structures</e1>, there is no <e2>floor voids</e2> to install either electric vehicle charge points or cable routes.",not-part-of,synthetic
+7f72632a-dc0a-4318-afd7-7090b42350fc,Mechanical supply terminals should be located and directed to avoid draughts.,{'ID': '106_UK_DocF_V1_Ventilation'},Mechanical <e1>supply terminals</e1> should be <e2>located</e2> and directed to avoid draughts.,necessity,annotated
+6e5e61dd-039d-4079-9c3f-f52fc12efefb,For continuing horizontal structures the loaded area shall be calculated span by span.,{'ID': '12_Finnish_StabilityOfStructures'},For <e1>continuing</e1> horizontal structures the loaded area shall be <e2>calculated span by span</e2>.,none,annotated
+7d7d55f1-b28d-4ce8-aec6-dd4dc0786ce8_1,,,"For sizes of cylinder not listed, the <e1>installation and commissioning checklist</e1> from the cylinder should not exceed <e2>B</e2>, where V is the volume in litres.",less-equal,synthetic
+973c9430-2b4a-4ab4-82df-7060c3002f77_1,,,The <e1>air leakage rate figure</e1> for the community heating primary circuit should be a minimum of <e2>half a metre</e2>.,greater-equal,synthetic
+6a41a473-bd3c-4e38-a093-094b3fdae388_8,,,At least one in every <e1>(16.66 8.33 V0.4)/(1000 24)</e1> remaining <e2>approach</e2> must be provided with cable routes.,equal,synthetic
+e43c1e88-be80-42d9-944e-1bf0f0f82479_1,,,Individual flights are: for gradients up to 1:15 not more than 10m long; for <e1>pitch</e1> up to <e2>450mm</e2> not more than 5m long.,less-equal,synthetic
+53e31e26-a39b-4047-a86e-bdb8021413e8,Window handles on windows that open outwards are not more than 650mm from the inside face of the wall when the window is at its maximum openable angle.,{'ID': '84_UK_DocO_Overheating'},<e1>Window handles</e1> on windows that <e2>open outwards</e2> are not more than 650mm from the inside face of the wall when the window is at its maximum openable angle.,none,annotated
+01d924bf-4a69-4eb8-b05e-ce993aee3d45,Perimeter insulation should be continuous and have a minimum thickness of 25mm.,{'ID': '135_UK_DocL_V1_ConsrvationOfFuelAndPower'},Perimeter insulation should be continuous and have a minimum <e1>thickness</e1> of <e2>25mm</e2>.,greater-equal,annotated
+ddd6ec57-ed54-4a8a-abaf-4b1efc287dde,The flushing shall be carried out with household water to remove any dirt and debris from the pipe network.,{'ID': '111_Finnish_Health-WaterAndSewerage'},The <e1>flushing</e1> shall be <e2>carried out with household water</e2> to remove any dirt and debris from the pipe network.,necessity,annotated
+2633c957-07b4-4caa-a9d6-5acbac16b0b0,NOTE: Linear interpolation should be used to determine efficiencies between manufacturers declared efficiencies at 30 and 100 load.,{'ID': '245_UK_DocM_V2_AccessAndUseOfBuildings'},NOTE: Linear interpolation should be used to determine <e1>efficiencies</e1> between manufacturers declared efficiencies at 30 and <e2>100</e2> load.,none,annotated
+c2e0629d-350b-45b8-9e9e-d58be1780f12_6,,,"If the <e1>door</e1> has no <e2>window</e2>, it should be treated as having one bedroom when calculating the ventilation required for the purposes of meeting the ventilation standards.",not-part-of,synthetic
+6c789809-b1b8-429a-8fe2-8ce16f8a4b54_10,,,Air flows in the continuous working area of a parking garage for motor vehicles shall be designed so that the <e1>access</e1> does not exceed <e2>60 persons</e2>.,less-equal,synthetic
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3,"Where the cost of installing only cable routes is more than 7% of the total cost of the major renovation, there is no requirement to install either electric vehicle charge points or cable routes.",{'ID': '53_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where the <e1>cost</e1> of installing only cable routes is more than <e2>7%</e2> of the total cost of the major renovation, there is no requirement to install either electric vehicle charge points or cable routes.",greater,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479_3,,,Individual flights are: for gradients up to 1:15 not more than 10m long; for gradients up to 1:12 not more than <e1>half a metre</e1> <e2>layers</e2>.,less-equal,synthetic
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",{'ID': '75_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for <e1>electric vehicle charge points</e1> must be installed in a minimum of one fifth of the total number of parking spaces, except where the <e2>cost</e2> of that installation exceeds 7% of the total cost of the major renovation.",none,annotated
+aef92227-4c01-4c59-b96d-ce414540606b,"Appliances capable of burning both biomass fuel and fossil fuel the CO2 emission factor and primary energy factor for dua-lfuel appliances should be used, except where the building is in a smoke control area, when the anthracite figure should be used.",{'ID': '63_UK_DocM_V2_AccessAndUseOfBuildings'},"Appliances capable of burning both biomass fuel and fossil fuel the CO2 emission factor and primary energy factor for dua-lfuel appliances should be used, except where the <e1>building</e1> is in a <e2>smoke control area</e2>, when the anthracite figure should be used.",part-of,annotated
+825053cb-af5d-43a9-b59b-e2a5ae78ea73_2,,,The <e1>from the top and bottom corners of the door</e1> of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the number of dwellings in the residential building; b. the <e2>service life</e2> of associated parking spaces.,greater,synthetic
+993e54cc-49c3-43cb-995e-1a951c93c775_3,,,"When a warning sign is not posted, the areas shall be designed to an axle load Qk and also to an <e1>design value</e1> equal to <e2>900-1000mm</e2>.",equal,synthetic
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and <e1>bathrooms</e1> as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. <e2>toilet facility</e2> intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",none,annotated
+1320873f-de9b-4c55-a7c0-67f545c4a46e,"All access routes to principal, or alternative accessible, entrances should be surfaced so that people are able to travel along them easily, without excessive effort and without the risk of tripping or falling.",{'ID': '42_UK_DocM_V2_AccessAndUseOfBuildings'},"All <e1>access routes</e1> to principal, or <e2>alternative accessible</e2>, entrances should be surfaced so that people are able to travel along them easily, without excessive effort and without the risk of tripping or falling.",none,annotated
+2f8d4247-e53b-49ae-bd26-c4f1765eaee8_1,,,"Extract air of <e1>service life</e1> <e2>0.3W/m2</e2>, 3 and 4 shall not be used as recirculation air.",equal,synthetic
+c7035b48-7244-40a9-a70e-1d244caf72ac,"The same approved calculation tool must be used to calculate the target primary energy rate, target emission rate and target fabric energy efficiency rate and the dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate.",{'ID': '56_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The same approved calculation tool must be <e1>used to calculate</e1> the target primary energy rate, target emission rate and target fabric energy efficiency rate and the dwelling primary energy rate, dwelling emission rate and <e2>dwelling fabric energy efficiency rate</e2>.",selection,annotated
+dd898f7c-ee89-4c12-adaf-0ba78a6b001f,"Provision shall be made to prevent people moving in or about the building from colliding with open windows, skylights or ventilators.",{'ID': '98_UK_DocK_ProtectionFromFalling'},"<e1>Provision</e1> shall be <e2>made to prevent people moving in or about the building from colliding with open windows, skylights or ventilators</e2>.",necessity,annotated
+0da52584-1b37-48b5-840f-3795ae695275_7,,,the minimum clear dimensions of the platform are: <e1>m3/(hm2) at 50Pa</e1> <e2>continuity</e2> and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+e43c1e88-be80-42d9-944e-1bf0f0f82479_10,,,Individual flights are: for gradients up to 1:15 not more than 10m long; for gradients up to 1:12 not more than <e1>4</e1> <e2>Air permeability</e2>.,less-equal,synthetic
+ef4f54b6-1099-4404-9fa2-d0c0d5e55543_8,,,The <e1>feasibility of installing high-efficiency alternative systems</e1> must not exceed the individual dwellings <e2>side edges</e2>.,less-equal,synthetic
+bc49524e-4bac-4d16-bc83-5a977019cfaa,Other ventilation systems may be acceptable if they can be shown to meet an equal level of performance.,{'ID': '30_UK_DocF_V1_Ventilation'},Other ventilation systems may be acceptable if <e1>they</e1> can be <e2>shown to meet an equal level of performance</e2>.,selection,annotated
+a1f91cfd-21f8-49a4-8468-746f49f4848e_10,,,"For a building that contains more than <e1>900mm</e1> <e2>patient  rooms</e2> for example a block of flats or a terrace of houses an average target primary energy rate, target emission rate and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",greater,synthetic
+35cacecf-06dc-4b0f-aadb-db2ee05518c7,The area of windows and roof windows (but excluding display windows) within the area served exceeds 40 of the facade area.,{'ID': '495_UK_DocM_V2_AccessAndUseOfBuildings'},The area of windows and roof windows (but excluding display windows) <e1>within the area served</e1> exceeds <e2>40</e2> of the facade area.,greater,annotated
+5ca184fa-e100-4f97-957d-e37ae944786f_0,,,The <e1>specification</e1> of installing electric vehicle charge points and cable routes is not more than <e2>0.7</e2> of the total capital cost of the major renovation.,less-equal,synthetic
+c952db0f-b605-4335-8d56-97fc339ad5ba_7,,,All <e1>32mm</e1> <e2>plaster-board</e2> of the installation and commissioning checklist should be completed.,equal,synthetic
+5869233a-4fc0-48bf-9007-2b0c9a169fef,"A building shall, if its size, number of storeys or an intended purpose of a premises within the building so requires, be divided into fire compartments in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",{'ID': '100_Finnish_FireSafety'},"A building shall, if its size, number of storeys or an intended purpose of a premises within the building so <e1>requires</e1>, be divided into fire compartments in order to restrict the spread of fire and smoke, to <e2>provide safe evacuation</e2> and to facilitate rescue and extinguishing measures.",none,annotated
+e4fb8d18-8dbc-4351-a2df-d87f880f476a,The fire resistance time requirement for balconies is half that of the load-bearing structures of the storey.,{'ID': '90_Finnish_FireSafety'},The <e1>fire resistance time requirement</e1> for balconies is <e2>half</e2> that of the load-bearing structures of the storey.,equal,annotated
+5163f2fb-022f-4589-889f-2ade7a9d49c6,The relevant parts of Part 2 and 3 should be signed by a person who is competent to design the residential building.,{'ID': '109_UK_DocO_Overheating'},The relevant <e1>parts</e1> of <e2>Part 2 and 3</e2> should be signed by a person who is competent to design the residential building.,part-of,annotated
+9c2051ae-9878-4772-9471-bc5b8a28c3ae,"For mechanical ventilation systems, fan units should be appropriately sized so that fans operating in normal background ventilation mode are not overly noisy, taking into consideration the use and likely background level of noise from other sources.",{'ID': '23_UK_DocF_V2_Ventilation'},"For mechanical ventilation systems, <e1>fan units</e1> should be <e2>appropriately sized</e2> so that fans operating in normal background ventilation mode are not overly noisy, taking into consideration the use and likely background level of noise from other sources.",necessity,annotated
+2afa8bba-b5ad-4e12-bc27-4beea3fd09b2_11,,,The normal relationship between the dimensions of the rise and going is: <e1>150m2</e1> equals <e2>25</e2>.,equal,synthetic
+05864826-21ef-4ae7-9af8-2aaeffc7267a_6,,,Modular and portable buildings with a planned service life of more than two years but with an <e1>patterns</e1> in a single location of less than <e2>40 degrees Celsius</e2> should be shown to comply with the energy efficiency requirements.,less,synthetic
+103f99ad-884b-4bae-9f22-ccb1c5bc3d26,"In an open garage of no more than five storeys, the maximum area may be used as the surface area of the storeys, even though the driveways between the various storeys are combined.",{'ID': '110_Finnish_FireSafety'},"In an open garage of no more than five storeys, the maximum <e1>area</e1> may be used as the surface area of the storeys, even though the driveways between the various storeys are <e2>combined</e2>.",none,annotated
+8fcdc238-3c30-4659-9303-1b126a39b2cd_4,,,The design solar load should be <e1>located away from the direct impact of the sources of local pollution</e1> by at least <e2>0.2</e2>.,greater-equal,synthetic
+8151be81-09ad-4dac-b2d2-f0d757915b6c_9,,,"However, when the snow load can occur, the <e1>habitable area</e1> of the load s should be at least <e2>0.06 m2</e2>.",greater-equal,synthetic
+4abb3268-3ba6-47e8-a8b7-4676dbaa9a16,"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide all means of escape routes with a minimum clear headroom of 2m, except in doorways.",{'ID': '28_UK_DocK_ProtectionFromFalling'},"For buildings other than dwellings and for common <e1>access areas</e1> in buildings that contain flats, Provide all <e2>means</e2> of escape routes with a minimum clear headroom of 2m, except in doorways.",selection,annotated
+c416d5e5-cb27-414c-b22e-7ed38be54ed1,There must be an automatic fire-extinguishing system that is suitable for its purpose and connected to the emergency centre.,{'ID': '232_Finnish_FireSafety'},There must be an automatic <e1>fire-extinguishing system</e1> that is <e2>suitable for its purpose</e2> and connected to the emergency centre.,selection,annotated
+9abdce80-0a4a-400a-8725-205bb3b887e4,"In hard water areas, suitable measures should be taken to treat the feed water to water heaters and the hot water circuit of combination boilers to reduce limescale accumulation.",{'ID': '218_UK_DocM_V2_AccessAndUseOfBuildings'},"In hard water areas, suitable <e1>measures</e1> should be taken to <e2>treat the feed water to water heaters and the hot water circuit of combination boilers to reduce limescale accumulation</e2>.",selection,annotated
+10e66a84-25db-40a0-87d5-6297d0732fe4,The shutoff valves shall be located: 1) at each house; 2) at each apartment; 3) in vertical service pipes; 4) on both sides of devices installed in the service pipes; 5) before a device or fixture that is connected to the connector pipe;  6) on both sides of the water meters.,{'ID': '93_Finnish_Health-WaterAndSewerage'},The shutoff valves shall be located: 1) at each house; 2) at each apartment; 3) in vertical service pipes; 4) on both sides of devices installed in the service pipes; 5) before a <e1>device</e1> or fixture that is connected to the <e2>connector pipe</e2>; 6) on both sides of the water meters.,part-of,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",{'ID': '85_Finnish_Health-IndoorClimateAndVentilation'},"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for <e1>extract air categories</e1> 1 and <e2>2</e2> if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",equal,annotated
+8e8f4fb5-00b5-404f-89df-a07287984748_9,,,"In buildings with a <e1>CO2</e1> greater than <e2>6m</e2>, automatic meter reading and data collection facilities should be installed.",greater,synthetic
+103f99ad-884b-4bae-9f22-ccb1c5bc3d26_2,,,"In an open garage of no more than <e1>6m</e1> <e2>Gasfired boilers</e2>, the maximum area may be used as the surface area of the storeys, even though the driveways between the various storeys are combined.",less-equal,synthetic
+dcc583b1-8c4c-42cf-a1ed-e8907de56254_10,,,"The rise of the indoor steps of other spaces intended for everyday use may be no more than 180 millimetres, and the <e1>net absorber area</e1> must be no less than <e2>50 m2</e2>.",greater-equal,synthetic
+26980508-105c-49db-8595-bf001a48d757_7,,,"In <e1>places</e1> with no fixed seats or <e2>Timing and temperature demand control</e2>, the number of persons shall be calculated to be two persons per square metre.",not-part-of,synthetic
+ef9dc94d-b79c-4fba-897a-eed2b90084b2,"Thermal bridging, including at the party wall, should be reasonably limited.",{'ID': '150_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Thermal bridging</e1>, including at the party wall, should be <e2>reasonably limited</e2>.",necessity,annotated
+83ff563b-077a-4849-b526-382fbb012647,The breaking of a glass structure or other light-permeable structure of a building must not cause a danger of falling or a danger of injury from fragments falling onto persons below.,{'ID': '67_Finnish_SafetyOfUse'},The <e1>breaking</e1> of a glass structure or other light-permeable structure of a building must <e2>not cause a danger of falling or a danger of injury from fragments falling onto persons below</e2>.,necessity,annotated
+a4dc06ab-99c3-4c8b-b295-eb3e6a64320a_7,,,"The free <e1>air flow rate</e1> from the ground or from the surface of a driveway or walkway of the lower edge of a structural element, device or equipment protruding from the building, such as a balcony, bay window, sign, lighting device or awning, must be at least <e2>1,500  millimetres</e2>, unless the area is protected so as to prevent the danger of collision.",greater-equal,synthetic
+6075de3c-d339-4ba4-9945-990480975615,"Where a kitchen and living room accommodation are not separate rooms (i.e. open plan), no fewer than three ventilators of the same equivalent area as for other habitable rooms should be provided within the open-plan space.",{'ID': '94_UK_DocF_V1_Ventilation'},"Where a kitchen and living room accommodation are not separate rooms (i.e. open plan), no fewer than <e1>three</e1> <e2>ventilators</e2> of the same equivalent area as for other habitable rooms should be provided within the open-plan space.",greater-equal,annotated
+7d35f4c4-fa65-4d68-a974-f54386ca8aee,"However, a horizontal gap in a protective part must be no higher than ten millimetres.",{'ID': '49_Finnish_SafetyOfUse'},"However, a horizontal <e1>gap</e1> in a protective part must be no higher than <e2>ten millimetres</e2>.",less-equal,annotated
+bfe386ee-8c0b-41d4-9967-6e873edf7229,"Floors and foundations: insulation should be installed tight to the structure, without air gaps between insulation panels and at edges.",{'ID': '148_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Floors and foundations: insulation should be <e1>installed tight to the structure</e1>, <e2>without air gaps between insulation panels and at edges</e2>.",selection,annotated
+d504fd87-d13d-4936-9d7a-71d17954760d_3,,,The <e1>glare and reflections</e1> of the steps in an exit may be no more than <e2>230mm</e2>.,less-equal,synthetic
+11f2902d-29c2-474e-97d0-628a2a97a666_6,,,"<e1>air extract rate</e1> of over <e2>0.15</e2> must be equipped with an appropriate safety barrier, railing or handrail.",greater,synthetic
+f9de28ac-45bb-4400-9d9f-8afee73bd2e3_3,,,The <e1>wide</e1> should not exceed <e2>five</e2> of dwelling floor area.,less-equal,synthetic
+2de867fe-80e7-4617-ad18-36225dd45ab1_4,,,Hinged or pivot windows with an <e1>either side</e1> of less than <e2>9 metres</e2> are not suitable for purge ventilation.,less,synthetic
+84cd76d7-e5d0-4f39-94bc-0236c65d533a_5,,,"in residential buildings of not more than two storeys, one exit of no less than <e1>90mm</e1> in <e2>widened</e2> is permitted.",greater-equal,synthetic
+9a574829-3211-4b4f-8c0c-c7a7ab9cfd54,The whole building ventilation rate should be met.,{'ID': '47_UK_DocF_V2_Ventilation'},The whole building <e1>ventilation rate</e1> should be <e2>met</e2>.,necessity,annotated
+38cd3221-7fc9-4462-be20-78b16a4309d3_0,,,The <e1>elevation difference</e1> of openings in the newly created dwelling should not be more than <e2>10m</e2> of the total floor area.,less-equal,synthetic
+e32bbb47-c826-40c1-8ea4-8c32353d3fd2_10,,,There shall be <e1>65mm</e1> of <e2>room</e2> provided for people in the building.,equal,synthetic
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9,"In buildings more than 9 metres and at most 28 metres in height, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",{'ID': '126_Finnish_SafetyOfUse'},"In buildings more than 9 metres and at most 28 metres in height, the attic and roof must be accessible via the interior and exterior of the building; in <e1>buildings</e1> more than 28 metres in <e2>height</e2>, these must be accessible via the interior.",part-of,annotated
+f36650d9-cd31-4795-9728-7a4dcf3cadde,"Dwellings, accommodation premises, institutions, day-care institutions, day-care centres and other early childhood education premises and schools must be provided with an appropriate system that gives a warning at an early stage of a beginning fire.",{'ID': '229_Finnish_FireSafety'},"Dwellings, accommodation premises, <e1>institutions</e1>, day-care institutions, day-care centres and other early childhood education premises and schools must be provided with an appropriate <e2>system that gives a warning at an early stage of a beginning fire</e2>.",necessity,annotated
+2f8d4247-e53b-49ae-bd26-c4f1765eaee8,"Extract air of categories 2, 3 and 4 shall not be used as recirculation air.",{'ID': '73_Finnish_Health-IndoorClimateAndVentilation'},"<e1>Extract air</e1> of categories 2, 3 and 4 shall <e2>not be used as recirculation air</e2>.",necessity,annotated
+956efc87-87de-4d3c-99fb-dc58eab9353b_8,,,A dwelling that is intended for sheltered housing or supported housing of a person with mobility or functional impairment shall have at least one toilet and washing facility which has a free space with a <e1>Signs</e1> of at least <e2>proportion</e2>.,greater-equal,synthetic
+66b3628a-f0ee-4bc7-93c8-2ae0145a2e78,"In a room with no openable window, an intermittent extract fan should be provided with controls which continue to operate the fan for at least 15 minutes after the room is vacated.",{'ID': '83_UK_DocF_V1_Ventilation'},"In a room with no openable window, an <e1>intermittent extract fan</e1> should be provided with <e2>controls</e2> which continue to operate the fan for at least 15 minutes after the room is vacated.",part-of,annotated
+793cb939-b3d9-46eb-ae65-71a4d5c8031b_2,,,Where the <e1>kitchens</e1> is within the private curtilage of the dwelling (but not within a carport or <e2>chambers</e2>) at least one space is a standard parking bay that can be widened to 3.3m.,not-part-of,synthetic
+0ea1e862-2434-4fc8-97a2-b076c992ef20_1,,,"The <e1>total supply air flow</e1> of an exit must be at least <e2>9mm</e2> and its free height must be at least 2,100 millimetres.",greater-equal,synthetic
+4e4fdf56-c45b-4d89-b18f-7a2f24a41ba9_5,,,"In spaces intended for more than 60 persons, the <e1>away</e1> of the access route must be at least <e2>900mm</e2>.",greater-equal,synthetic
+72d7716f-7e3e-442c-9e42-14d4b19e18e3_0,,,A <e1>habitable rooms</e1> that is being connected to a new building should not have a <e2>absence</e2> for delivered heat to the building which is greater than 0.350kgCO2/kWh.,not-part-of,synthetic
+103f99ad-884b-4bae-9f22-ccb1c5bc3d26,"In an open garage of no more than five storeys, the maximum area may be used as the surface area of the storeys, even though the driveways between the various storeys are combined.",{'ID': '110_Finnish_FireSafety'},"In an open garage of no more than five storeys, the maximum area may be used as the surface area of the storeys, even though the <e1>driveways</e1> <e2>between the various storeys</e2> are combined.",selection,annotated
+9415ae4b-7a74-4c70-a245-e4381c6d71bf_1,,,"At gables and party walls, insulation should extend to the wall; if the <e1>electrically operated appliance</e1> between the wall and joist is less than <e2>3</e2>, perimeter insulation may be required.",less,synthetic
+a86b58e8-046f-44b7-8e1b-00c876c8c647,"Parapets in categories A to E and panel parts of walls acting as parapets, as well as their fasteners, shall be designed to the concentrated load Qk = 0.3 kN acting on a random spot.",{'ID': '30_Finnish_StabilityOfStructures'},"Parapets in categories A to E and panel parts of walls <e1>acting as parapets</e1>, as well as their <e2>fasteners</e2>, shall be designed to the concentrated load Qk = 0.3 kN acting on a random spot.",none,annotated
+77f993c6-dff1-4f9a-8f66-73221d3cbaff,"If the dwelling only has one habitable room, a minimum ventilation rate of 13l/s should be used.",{'ID': '43_UK_DocF_V1_Ventilation'},"If the <e1>dwelling</e1> only has one <e2>habitable room</e2>, a minimum ventilation rate of 13l/s should be used.",part-of,annotated
+3121fe90-27db-405e-a42a-df3cd22ee176_9,,,"Where necessary, <e1>1.3 seconds</e1><e2>holes</e2>, one above the other, must be installed in order to take into account children and users of wheelchairs.",equal,synthetic
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9,"In buildings more than 9 metres and at most 28 metres in height, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",{'ID': '126_Finnish_SafetyOfUse'},"In buildings more than 9 metres and at most 28 metres in height, the attic and roof must be accessible via the interior and exterior of the building; in <e1>buildings</e1> more than <e2>28 metres</e2> in height, these must be accessible via the interior.",none,annotated
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new building as well as in <e1>repair and alteration</e1> work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. <e2>toilet facility</e2> intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",none,annotated
+d0b6759e-deec-451d-bd7a-ec65b96048be_3,,,"extract air of <e1>heat</e1> <e2>190  millimetres</e2> shall be conducted through individual ducts, or common ducts serving spaces of the same type as regards level of air purity, to the outdoors, into a collection duct installed above the spaces it serves or into an extract air chamber.",equal,synthetic
+e93da678-4b62-493b-8c4d-31a95da3885d,An energy declaration shall be drawn up when designing a building.,{'ID': '172_Finnish_EnergyEfficiency'},An <e1>energy declaration</e1> shall be <e2>drawn up when designing a building</e2>.,necessity,annotated
+aa41a5d4-c0b1-4da7-84a0-5c2e2738654f_0,,,The total number of ventilators installed in the dwellings habitable rooms and kitchens should be at least the following: Five ventilators if the dwelling has more than <e1>1100mm</e1> <e2>windows</e2>.,greater,synthetic
+239bd568-c5f2-4ab5-955c-f2d8d86b7b7f,"Where closing devices are needed for fire control, electrically powered hold-open devices or swing-free closing devices should be used as appropriate.",{'ID': '90_UK_DocM_V2_AccessAndUseOfBuildings'},"Where closing devices are needed for fire control, electrically powered hold-open devices or swing-free <e1>closing devices</e1> should be <e2>used as appropriate</e2>.",necessity,annotated
+9ff8b8fd-5361-4c3d-9a7e-7459276c8df7_0,,,The <e1>size</e1> must not exceed the individual dwellings <e2>service life</e2>.,less-equal,synthetic
+05864826-21ef-4ae7-9af8-2aaeffc7267a,Modular and portable buildings with a planned service life of more than two years but with an intended time of use in a single location of less than two years should be shown to comply with the energy efficiency requirements.,{'ID': '83_UK_DocM_V2_AccessAndUseOfBuildings'},Modular and portable buildings with a planned service life of more than two years but with an <e1>intended time of use</e1> <e2>in a single location</e2> of less than two years should be shown to comply with the energy efficiency requirements.,selection,annotated
+6c789809-b1b8-429a-8fe2-8ce16f8a4b54_2,,,Air flows in the continuous working area of a parking garage for motor vehicles shall be designed so that the <e1>Control</e1> does not exceed <e2>300 millimetres</e2>.,less-equal,synthetic
+34a524ec-6994-426f-86af-78788fd34a80_2,,,"Between the locking points for the mortice lock and surface-mounted rim lock, the <e1>proportion</e1> should be <e2>390 millimetres</e2>.",equal,synthetic
+7323113d-fcd0-4e19-a24a-c6171ec8c2b7,District heat networks and community heating systems should be designed to accommodate heat meter(s) for each dwelling.,{'ID': '295_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>District heat networks</e1> and <e2>community heating systems</e2> should be designed to accommodate heat meter(s) for each dwelling.,none,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479,Individual flights are: for gradients up to 1:15 not more than 10m long; for gradients up to 1:12 not more than 5m long.,{'ID': '18_UK_DocM_V1_AccessAndUseOfBuildings'},Individual flights are: for gradients up to 1:15 not more than 10m long; for gradients up to 1:12 not more than <e1>5m</e1> <e2>long</e2>.,less-equal,annotated
+d687ab7a-74e0-4d2e-8aad-27e009651634,Joints between vertical and horizontal structures shall always be designed without a reduction factor.,{'ID': '13_Finnish_StabilityOfStructures'},<e1>Joints</e1> between vertical and horizontal structures shall always be <e2>designed without a reduction factor</e2>.,necessity,annotated
+f009a781-0ced-408d-b3d1-6ae7a848012e,"The landings in the indoor and outdoor areas of a building must be safe, sufficiently spacious and suitable for their purpose.",{'ID': '31_Finnish_SafetyOfUse'},"The landings in the <e1>indoor</e1> and outdoor areas of a building must be safe, sufficiently spacious and <e2>suitable for their purpose</e2>.",none,annotated
+fa8a6d84-eb99-490e-8169-3c65353fb553,"For large roofs, where the smaller horizontal dimension of the roof is 50 m or more, and the topography is windswept, the value of the exposure coefficient shall be at least 1.",{'ID': '61_Finnish_StabilityOfStructures'},"For large <e1>roofs</e1>, where the smaller horizontal dimension of the roof is 50 m or more, and the topography is windswept, the value of the <e2>exposure coefficient</e2> shall be at least 1.",part-of,annotated
+203faa23-7b71-47c9-a6e5-2333ac45389e,"The riser of the indoor steps of dwelling units and living quarters  may  be  no  more  than  190  millimetres,  and  the  tread  must  be  no  less  than  250 millimetres.",{'ID': '22_Finnish_SafetyOfUse'},"The riser of the <e1>indoor steps</e1> of dwelling units and <e2>living quarters</e2> may be no more than 190 millimetres, and the tread must be no less than 250 millimetres.",part-of,annotated
+f36650d9-cd31-4795-9728-7a4dcf3cadde,"Dwellings, accommodation premises, institutions, day-care institutions, day-care centres and other early childhood education premises and schools must be provided with an appropriate system that gives a warning at an early stage of a beginning fire.",{'ID': '229_Finnish_FireSafety'},"<e1>Dwellings</e1>, accommodation premises, institutions, day-care institutions, day-care centres and other early childhood education premises and schools must be provided with an appropriate <e2>system that gives a warning at an early stage of a beginning fire</e2>.",necessity,annotated
+c7035b48-7244-40a9-a70e-1d244caf72ac,"The same approved calculation tool must be used to calculate the target primary energy rate, target emission rate and target fabric energy efficiency rate and the dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate.",{'ID': '56_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The same approved calculation tool must be <e1>used to calculate</e1> the target primary energy rate, target emission rate and target fabric energy efficiency rate and the <e2>dwelling primary energy rate</e2>, dwelling emission rate and dwelling fabric energy efficiency rate.",selection,annotated
+bf798097-bb99-42d0-a73f-8cebab8fbeb8_0,,,"In the entrance halls and other indoor areas of administrative, service and business premises and in assembly areas, the riser of the steps must be no more than 160 millimetres and the <e1>power input from controls</e1> must be no less than <e2>900mm</e2>.",greater-equal,synthetic
+8b9e1d32-efa8-409b-873b-22e2eae5b537,External walls and their various layers must form a whole that prevents water from harmfully penetrating into the structures.,{'ID': '95_Finnish_Health-Humidity'},External <e1>walls</e1> and their various <e2>layers</e2> must form a whole that prevents water from harmfully penetrating into the structures.,part-of,annotated
+5305da48-b810-4fd8-a0b3-7520f89ff401,"When installing or renovating thermal elements, the element being installed should be draught-proofed, and air-leakage gaps should be filled.",{'ID': '194_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When installing or renovating thermal elements, the <e1>element</e1> being installed should be <e2>draught-proofed</e2>, and air-leakage gaps should be filled.",necessity,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",{'ID': '85_Finnish_Health-IndoorClimateAndVentilation'},"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for <e1>extract air categories</e1> <e2>1</e2> and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",equal,annotated
+a94b6b4f-a05e-403e-bbca-ebe1b94e38a1,"The area of sloping surfaces such as staircases, galleries, raked auditoria and tiered terraces should be taken as their area on plan.",{'ID': '470_UK_DocM_V2_AccessAndUseOfBuildings'},"The area of <e1>sloping surfaces</e1> such as staircases, <e2>galleries</e2>, raked auditoria and tiered terraces should be taken as their area on plan.",selection,annotated
+86350df0-a40e-412b-a301-004524d56736,"For wet heating systems in new dwellings with a floor area of 150m2 or greater, a minimum of two independently controlled heating circuits should be provided.",{'ID': '246_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For wet heating systems in new dwellings with a floor area of 150m2 or greater, a minimum of <e1>two</e1> independently controlled <e2>heating circuits</e2> should be provided.",greater-equal,annotated
+63af9f99-6939-4e8c-a6a9-8b10942e1597_8,,,"The handle to at least <e1>1m2</e1> <e2>heat release</e2> in the principal living area is located between 450mm and 1200mm above floor level, unless the window is fitted with a remote opening device that is within this height range.",greater-equal,synthetic
+e43c1e88-be80-42d9-944e-1bf0f0f82479_10,,,Individual flights are: for <e1>input charge</e1> up to <e2>850 millimetres</e2> not more than 10m long; for gradients up to 1:12 not more than 5m long.,less-equal,synthetic
+703e5c71-bd54-4267-acf4-fa7db1e70d49,"Any sound system in an auditorium, a restaurant, a conference facility, a facility for festive occasions, a teaching facility or other similar assembly facility or a public service facility shall have an induction loop or a similar sound transmission system.",{'ID': '67_Finnish_Accessibility'},"Any sound system in an <e1>auditorium</e1>, a restaurant, a conference facility, a facility for festive occasions, a teaching facility or other similar assembly facility or a public service facility shall have an <e2>induction loop</e2> or a similar sound transmission system.",none,annotated
+a5e9c36f-358f-4375-943c-6d5b89c82647,"Any abrupt level differences of over 0.7 metres and any precipices located in the vicinity of common play and recreation areas associated with buildings with more than two dwellings must be indicated by appropriate barriers or suitable planted areas, or outfitted with a base that cushions any fall.",{'ID': '92_Finnish_SafetyOfUse'},"Any abrupt <e1>level differences</e1> of over 0.7 metres and any precipices located in the vicinity of common play and recreation areas associated with buildings with more than two dwellings must be indicated by appropriate barriers or suitable planted areas, or <e2>outfitted with a base that cushions any fall</e2>.",necessity,annotated
+64695439-3458-4d43-8e7b-a2ba75075cea,"There must be safe and easily accessible, uninterrupted access routes to any chimneys, ventilation equipment and other building equipment and structural elements that are located on the roof of the building and that must be accessed regularly.",{'ID': '124_Finnish_SafetyOfUse'},"There must be safe and <e1>easily accessible</e1>, uninterrupted <e2>access routes</e2> to any chimneys, ventilation equipment and other building equipment and structural elements that are located on the roof of the building and that must be accessed regularly.",selection,annotated
+74002ed3-548e-4e2f-8835-be76e643c67d_4,,,NOTE 2: Double doors effectively provide nibs where each leaf is at least <e1>160 millimetres</e1> <e2>number of appliances</e2>.,greater-equal,synthetic
+c6d0c791-e7f9-4a3f-abc1-631a2e6be0d1,Manual reset should be possible if there is an over-temperature trip.,{'ID': '269_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Manual reset</e1> should <e2>be possible if there is an over-temperature trip</e2>.,necessity,annotated
+baee716c-b8c2-4500-b4de-63fa11f007b1_9,,,A minimum of one in <e1>1800mm</e1> of the remaining <e2>Standing areas</e2> must have access to cable routes.,equal,synthetic
+01bd7c41-594c-4440-8058-c34f1c4bad09,"When determining the free area available for ventilation during sleeping hours, only the proportion of openings that can be opened securely should be considered to provide useful ventilation.",{'ID': '82_UK_DocO_Overheating'},"When determining the <e1>free area</e1> <e2>available for ventilation during sleeping hours</e2>, only the proportion of openings that can be opened securely should be considered to provide useful ventilation.",selection,annotated
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_10,,,"In buildings more than <e1>25mm</e1> and at most 28 metres in <e2>long</e2>, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",greater,synthetic
+8aa4b706-1659-4e30-a4fe-e7f33efe3241_10,,,All <e1>E</e1> <e2>staircase</e2> of the compliance checklist should be completed.,equal,synthetic
+8e8f4fb5-00b5-404f-89df-a07287984748_10,,,"In buildings with a <e1>power requirements</e1> greater than <e2>450mm</e2>, automatic meter reading and data collection facilities should be installed.",greater,synthetic
+23db27ac-b594-4b26-883d-922d713d382a,"When installing or renovating thermal elements, the element being installed should be draught-proofed and airleakage gaps should be filled.",{'ID': '161_UK_DocM_V2_AccessAndUseOfBuildings'},"When installing or renovating thermal elements, the element being installed should be <e1>draught-proofed</e1> and <e2>airleakage gaps</e2> should be filled.",none,annotated
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3_7,,,"Where the cost of installing only cable routes is more than 7% of the total cost of the major <e1>Handrails</e1>, there is no <e2>Ventilation ductwork</e2> to install either electric vehicle charge points or cable routes.",not-part-of,synthetic
+12e545d1-64f4-45c9-a520-5b8a003eba0a,"If the dwelling has more than one exposed facade, the area of background ventilators on each facade should be similar, to allow cross-ventilation.",{'ID': '85_UK_DocF_V1_Ventilation'},"If the dwelling has more than one <e1>exposed</e1> facade, the area of background ventilators on each <e2>facade</e2> should be similar, to allow cross-ventilation.",none,annotated
+3c28dbd6-8a3d-4ede-ae08-89e4b5d69d60_10,,,The approach route is a minimum of 900mm wide with a maximum <e1>intermediate landing</e1> of <e2>One</e2>.,less-equal,synthetic
+85745724-aa09-4cdd-ad17-3c50ea2b99a1,"Where sanitary facilities are wheelchair accessible, basins and sinks should be wall hung (typically with their rim 770-850mm above finished floor level) and the clear zone beneath basins, services and pedestals is maximised to enable wheelchair users to approach.",{'ID': '105_UK_DocM_V1_AccessAndUseOfBuildings'},"Where sanitary facilities are wheelchair accessible, basins and sinks should be <e1>wall hung (typically with their rim 770-850mm above finished floor level)</e1> and the clear zone <e2>beneath basins, services and pedestals</e2> is maximised to enable wheelchair users to approach.",none,annotated
+76bf63bd-30f4-440d-81a0-61ca16170f70,Control should be maximised and heat gain to uninsulated pipes should only be permitted where the proportion of the cooling load relating to distribution pipework is less than 1 of the total load.,{'ID': '177_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Control</e1> should be maximised and heat gain to uninsulated pipes should only be permitted where the <e2>proportion of the cooling load relating to distribution pipework</e2> is less than 1 of the total load.,none,annotated
+1913381b-a2cc-496e-9168-82ccf2a01d50_8,,,"In connection with repair and alteration work, the heat emitters connected to the domestic hot water ring duct may be replaced so that the <e1>design flow rate</e1> of the heat emitters to be installed does not exceed <e2>500 millimetres</e2>.",less-equal,synthetic
+83344b26-7cf0-452a-9dac-c0288c46393d,"The non-primary doors for entering a dwelling (for example, back door or garage inter-connecting doors) should be fitted with a multipoint locking system that meets the requirements of: PAS 3621 (key locking on both sides), or PAS 8621 (non-key locking on the internal face), or PAS 10621 (non-key locking on the internal face, but with an external locking override facility).",{'ID': '37_UK_DocQ_Security_Dwellings'},"The non-primary doors for entering a dwelling (for example, back door or garage inter-connecting doors) should be fitted with a <e1>multipoint locking system</e1> that meets the requirements of: <e2>PAS 3621 (key locking on both sides)</e2>, or PAS 8621 (non-key locking on the internal face), or PAS 10621 (non-key locking on the internal face, but with an external locking override facility).",selection,annotated
+825053cb-af5d-43a9-b59b-e2a5ae78ea73_4,,,The <e1>level with entry</e1> of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the <e2>results</e2> of dwellings in the residential building; b. the number of associated parking spaces.,greater,synthetic
+b810df40-4dd8-44c4-80c4-b33bb873a5e9,"If  the  circulation  piping  is  located  inside  the  building envelopes insulation, 25 of the calculated domestic hot water circulation heat loss shall be added  to  the  thermal  load  of  the  spaces  of  the  building.",{'ID': '103_Finnish_EnergyEfficiency'},"If the circulation piping is located inside the building envelopes insulation, 25 of the <e1>calculated</e1> <e2>domestic hot water circulation heat loss</e2> shall be added to the thermal load of the spaces of the building.",selection,annotated
+cc72106e-9e7f-47cf-8a95-0173a8305dad_3,,,"In a new building, the crawl space <e1>cross-sectional area</e1> must be <e2>two </e2> on average at the minimum.",greater-equal,synthetic
+500fc416-e652-4a2c-8dd3-8d9754ea1829,There should be no visible mould on the inner surfaces of external walls of a properly heated building with typical moisture generation.,{'ID': '115_UK_DocF_V2_Ventilation'},There should be <e1>no visible</e1> <e2>mould</e2> on the inner surfaces of external walls of a properly heated building with typical moisture generation.,selection,annotated
+710ef992-e187-4b1a-894b-e0e222f54359_11,,,"NOTE: For grid-supplied electricity, a <e1>presence</e1> of <e2>300mm</e2> and primary energy factor of 1.501kWhPE/kWh should be used.",equal,synthetic
+02f5e3fb-7a8b-4a88-a6e5-337cc0835284,"When a new residential building is erected, information about the building must be given to the owner of the building to allow them to use the overheating mitigation strategy effectively.",{'ID': '90_UK_DocO_Overheating'},"When a new <e1>residential building</e1> is <e2>erected</e2>, information about the building must be given to the owner of the building to allow them to use the overheating mitigation strategy effectively.",selection,annotated
+419892bb-5044-4c63-a8ba-7747ad52c23d,"When installing windows, roof windows, rooflights or doors (all of which are controlled fittings), the controlled fitting should be well fitted and reasonably draught-proof.",{'ID': '195_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When installing windows, roof windows, rooflights or doors (all of which are controlled fittings), the <e1>controlled fitting</e1> should be <e2>well fitted</e2> and reasonably draught-proof.",necessity,annotated
+3ec0e36a-0227-4b76-9fd5-7a2f77877d99,A building that contains both living accommodation and space for commercial purposes (e.g. for a workshop or office) should be treated as a dwelling if the commercial part can be reverted to domestic use.,{'ID': '23_UK_DocM_V2_AccessAndUseOfBuildings'},A <e1>building</e1> that contains both living accommodation and space for commercial purposes (e.g. for a workshop or office) should be <e2>treated as a dwelling</e2> if the commercial part can be reverted to domestic use.,necessity,annotated
+eccd4f77-ef4a-41fd-a22a-620c84fdddd4_11,,,There is a minimum of <e1>30</e1> of worktop to at least <e2>distance</e2> of the oven and fridge or fridge freezer where this is taller than the worktop height (or to one side of a pair of tall appliances where they are located together at the end of a run).,greater-equal,synthetic
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c_3,,,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding <e1>25 decibels</e1> <e2>devices that will close the door in the event of fire</e2> is EI 30; however, minor sealing parts and penetrations may be class E 15.",greater,synthetic
+77be05f2-cd8c-4d35-85e4-6637b999d8e7,The value of the consequential improvement works should not be less than 10 of the value of the principal works.,{'ID': '452_UK_DocM_V2_AccessAndUseOfBuildings'},The value of the <e1>consequential</e1> <e2>improvement works</e2> should not be less than 10 of the value of the principal works.,selection,annotated
+fb5d3054-4911-4049-ba09-1c3e80f9c07c_0,,,"The tread of steps in uncovered or unheated outdoor staircases must be no less than 390 millimetres, and the <e1>Geo-location</e1> may be no more than <e2>20 degrees Celsius</e2>.",less-equal,synthetic
+c416d5e5-cb27-414c-b22e-7ed38be54ed1,There must be an automatic fire-extinguishing system that is suitable for its purpose and connected to the emergency centre.,{'ID': '232_Finnish_FireSafety'},There must be an automatic <e1>fire-extinguishing system</e1> that is suitable for its purpose and connected to the <e2>emergency centre</e2>.,necessity,annotated
+f7935bb4-9e5f-4e91-bbf1-54e45c1ef24c_8,,,A building with a <e1>maximum number of occupants</e1> exceeding <e2>certain proportion</e2> must be equipped with anchoring structures for safety lines.,greater,synthetic
+7d35f4c4-fa65-4d68-a974-f54386ca8aee_11,,,"However, a horizontal <e1>Waste water</e1> in a protective part must be no higher than <e2>four</e2>.",less-equal,synthetic
+bf798097-bb99-42d0-a73f-8cebab8fbeb8_10,,,"In the entrance halls and other indoor areas of administrative, service and business premises and in assembly areas, the riser of the steps must be no more than 160 millimetres and the <e1>fire resistance time</e1> must be no less than <e2>1,500  millimetres</e2>.",greater-equal,synthetic
+e320322e-3aee-4167-ad19-a6c6cc41f597,The water system shall incorporate: 1) a pressure gauge; 2) thermometers in the water pipe of mixed domestic hot water from the water heater and in the domestic hot water ring duct to measure the temperature of return water; 3) throttling valves.,{'ID': '97_Finnish_Health-WaterAndSewerage'},The <e1>water system</e1> shall incorporate: 1) a pressure gauge; 2) <e2>thermometers</e2> in the water pipe of mixed domestic hot water from the water heater and in the domestic hot water ring duct to measure the temperature of return water; 3) throttling valves.,necessity,annotated
+9a574829-3211-4b4f-8c0c-c7a7ab9cfd54,The whole building ventilation rate should be met.,{'ID': '47_UK_DocF_V2_Ventilation'},The <e1>whole</e1> <e2>building</e2> ventilation rate should be met.,selection,annotated
+beeec1b2-c382-40cc-aec2-6eda86f5782e,"Each residential unit, shared communal room and common space should be categorised separately.",{'ID': '25_UK_DocO_Overheating'},"Each residential unit, shared communal room and <e1>common space</e1> should be <e2>categorised separately</e2>.",necessity,annotated
+ef561e39-db90-462c-8dde-15fbeae954e5,A cube with edges of no more than 200 millimetres may pass between the upper edge of the barrier and the protective part.,{'ID': '50_Finnish_SafetyOfUse'},A <e1>cube</e1> with edges of no more than 200 millimetres may <e2>pass between the upper edge of the barrier and the protective part</e2>.,necessity,annotated
+7134933d-17df-4a8c-b72e-1c09177bad1c,The spread of fire in voids of wall-type building elements must be restricted at least by storey.,{'ID': '130_Finnish_FireSafety'},The <e1>spread of fire</e1> in voids of wall-type building elements must be <e2>restricted at least by storey</e2>.,necessity,annotated
+73a6e4e0-c157-4cae-bc28-c0788f6a1e53,"Activation (e.g. motion sensors and push buttons), safety features and the time-lapse allowed for entry and exit through powered door systems should be carefully considered to suit the needs of people who cannot react quickly.",{'ID': '73_UK_DocM_V2_AccessAndUseOfBuildings'},"Activation (e.g. motion sensors and push buttons), safety features and the time-lapse allowed for entry and <e1>exit</e1> through powered <e2>door systems</e2> should be carefully considered to suit the needs of people who cannot react quickly.",part-of,annotated
+2f815a08-db3c-48a6-b248-d69aeac870ee,"the vertical travel distance is: a. not more than 2m, where there is no liftway enclosure and no floor penetration; b. more than 2m, where there is a liftway enclosure.",{'ID': '173_UK_DocM_V2_AccessAndUseOfBuildings'},"the vertical <e1>travel distance</e1> is: a. not more than <e2>2m</e2>, where there is no liftway enclosure and no floor penetration; b. more than 2m, where there is a liftway enclosure.",less-equal,annotated
+10e66a84-25db-40a0-87d5-6297d0732fe4,The shutoff valves shall be located: 1) at each house; 2) at each apartment; 3) in vertical service pipes; 4) on both sides of devices installed in the service pipes; 5) before a device or fixture that is connected to the connector pipe;  6) on both sides of the water meters.,{'ID': '93_Finnish_Health-WaterAndSewerage'},The <e1>shutoff valves</e1> shall be located: 1) at each house; 2) at each apartment; 3) in vertical service pipes; 4) on both sides of devices installed in the service pipes; 5) before a device or <e2>fixture</e2> that is connected to the connector pipe; 6) on both sides of the water meters.,necessity,annotated
+533762d6-e592-494d-a08b-a0817b5b4f9f,"If there are associated parking spaces where there is not a requirement to install electric vehicle charge points, cable routes must be installed in all remaining associated parking spaces.",{'ID': '50_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If there are associated <e1>parking spaces</e1> where there is <e2>not a requirement to install electric vehicle charge points</e2>, cable routes must be installed in all remaining associated parking spaces.",selection,annotated
+66249fda-33bf-4d93-8bf9-53fb82ad0e95,"The driveway and parking area at a plot or building site must be separated from pedestrian, play and recreation areas.",{'ID': '87_Finnish_SafetyOfUse'},"The <e1>driveway</e1> and parking area at a <e2>plot</e2> or building site must be separated from pedestrian, play and recreation areas.",part-of,annotated
+ff3e8f86-1542-4f54-a776-cfdc8482bad7_10,,,The <e1>prevailing wind direction</e1> of an air conditioner working in cooling mode should be a minimum of <e2>56 metres</e2>.,greater-equal,synthetic
+86350df0-a40e-412b-a301-004524d56736,"For wet heating systems in new dwellings with a floor area of 150m2 or greater, a minimum of two independently controlled heating circuits should be provided.",{'ID': '246_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For wet <e1>heating systems</e1> in new dwellings with a floor area of 150m2 or greater, a minimum of two independently controlled <e2>heating circuits</e2> should be provided.",necessity,annotated
+01d924bf-4a69-4eb8-b05e-ce993aee3d45_5,,,Perimeter insulation should be continuous and have a minimum <e1>surface area</e1> of <e2>1800mm</e2>.,greater-equal,synthetic
+"8feaf7f2-dfd8-43ae-ab8d-791ee1ffd86c	However, if the elevation difference is no more than 1,000 millimetres, the ramp may not have a gradient of more than eight per cent.	{'ID': '9_Finnish_Accessibility'}_10",,,"However, if the <e1>diameter</e1> is no more than <e2>0.9 metres</e2>, the ramp may not have a gradient of more than eight per cent.",less-equal,synthetic
+e3b85ad6-6132-40d7-86f8-3cc5d44eb12c_6,,,<e1>twice the rise plus the going (2R G)</e1> <e2>submission</e2> should be close to an accessible bathroom suitable for a wheelchair user.,equal,synthetic
+88e23b46-22d9-4be6-87b7-40541f7995a9,"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the distance of the uppermost floor level from the entry level exceeds 24 metres; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",{'ID': '254_Finnish_FireSafety'},"A building shall be provided with a <e1>permanently installed</e1> <e2>dry riser</e2> that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the distance of the uppermost floor level from the entry level exceeds 24 metres; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",selection,annotated
+66249fda-33bf-4d93-8bf9-53fb82ad0e95,"The driveway and parking area at a plot or building site must be separated from pedestrian, play and recreation areas.",{'ID': '87_Finnish_SafetyOfUse'},"The <e1>driveway</e1> and parking area at a plot or <e2>building site</e2> must be separated from pedestrian, play and recreation areas.",part-of,annotated
+e3b85ad6-6132-40d7-86f8-3cc5d44eb12c_7,,,<e1>20mm</e1> <e2>systems</e2> should be close to an accessible bathroom suitable for a wheelchair user.,equal,synthetic
+835d8fad-7a27-4299-aa38-a5b1771a6779_5,,,"In large building complexes, such as retail parks and large sports centres, there should be <e1>600 x 600 millimetres</e1> wheelchair-accessible unisex <e2>block of flats</e2> capable of including an adult changing table.",equal,synthetic
+7f3f59a4-fc7e-4b14-8074-384f6cacf548,"The height of a barrier in a dwellings indoor areas may, however, be at least 0.9 metres if the drop is less than three metres.",{'ID': '45_Finnish_SafetyOfUse'},"The height of a barrier in a <e1>dwellings</e1> <e2>indoor areas</e2> may, however, be at least 0.9 metres if the drop is less than three metres.",part-of,annotated
+9952f64d-e0df-4b03-84af-150782f81387_9,,,"For mobility-impaired people, a <e1>courtyard</e1> of at least <e2>900-1000mm</e2> is preferred.",greater-equal,synthetic
+cf35d4a4-3170-421b-9be1-b68d928eed1d_10,,,"A roof with a <e1>energy savings</e1> greater than <e2>24 degrees Celsius</e2> must be constructed making appropriate use of walkways, roof ladders, safety ladders, roof stairs, roof treads and foot rails.",greater,synthetic
+c3cfbf29-a95f-4453-a7de-a8f6e4ca2ea8,"If sand, sludge, grease, petrol, oil or other detrimental physical or chemical substances may end up in the sewerage system or network or in the environment, the sewerage system shall be equipped with a separator or treatment device.",{'ID': '152_Finnish_Health-WaterAndSewerage'},"If <e1>sand</e1>, sludge, grease, petrol, oil or other detrimental physical or chemical substances may <e2>end up in the sewerage system or network or in the environment</e2>, the sewerage system shall be equipped with a separator or treatment device.",selection,annotated
+8aad11d6-bd81-4a57-bd73-7c1319a76494,"Where on-site electricity generation and storage is installed, such as photovoltaic panels or battery storage, systems should be an appropriate size for the site, available infrastructure and on-site energy demand.",{'ID': '331_UK_DocM_V2_AccessAndUseOfBuildings'},"Where <e1>on-site electricity generation</e1> and storage is installed, such as photovoltaic panels or battery storage, <e2>systems</e2> should be an appropriate size for the site, available infrastructure and on-site energy demand.",selection,annotated
+21bf2954-bfa8-44ef-bb2e-4e34367965ba,"If a load-bearing element is required to have a longer fire resistance time with respect to integrity E and insulation I than with respect to load-bearing capacity R, the longer fire resistance time shall also be applied to the load-bearing capacity.",{'ID': '88_Finnish_FireSafety'},"If a load-bearing element is required to have a longer fire resistance time with respect to integrity E and insulation I than with respect to load-bearing capacity R, the longer <e1>fire resistance time</e1> shall also be <e2>applied to the load-bearing capacity</e2>.",necessity,annotated
+5aebe4f8-6ca6-4448-94db-5272b5541efb,"The results of all pressure tests on dwellings, including any test failures, should be reported to the building control body.",{'ID': '359_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The <e1>results</e1> of all <e2>pressure tests</e2> on dwellings, including any test failures, should be reported to the building control body.",part-of,annotated
+1913381b-a2cc-496e-9168-82ccf2a01d50,"In connection with repair and alteration work, the heat emitters connected to the domestic hot water ring duct may be replaced so that the heat emission capacity of the heat emitters to be installed does not exceed 200 Watts per room.",{'ID': '67_Finnish_Health-WaterAndSewerage'},"In connection with repair and alteration work, the heat emitters connected to the domestic hot water ring duct may be replaced so that the <e1>heat emission capacity</e1> of the <e2>heat emitters</e2> to be installed does not exceed 200 Watts per room.",part-of,annotated
+aa41a5d4-c0b1-4da7-84a0-5c2e2738654f_2,,,The total number of ventilators installed in the dwellings habitable rooms and kitchens should be at least the following: Five ventilators if the dwelling has more than <e1>55 degrees Celsius</e1> <e2>cooker</e2>.,greater,synthetic
+0ea1e862-2434-4fc8-97a2-b076c992ef20,"The width of an exit must be at least 1,200 millimetres and its free height must be at least 2,100 millimetres.",{'ID': '214_Finnish_FireSafety'},"The <e1>width</e1> of an exit must be at least <e2>1,200 millimetres</e2> and its free height must be at least 2,100 millimetres.",greater-equal,annotated
+2cadb28f-a6c8-4fe2-b1c9-a918eb5437f9,On-site electricity generation systems must be commissioned to ensure that they produce as much electricity as is reasonable in the circumstances.,{'ID': '372_UK_DocL_V1_ConsrvationOfFuelAndPower'},On-site <e1>electricity generation systems</e1> must be <e2>commissioned to ensure that they produce as much electricity as is reasonable in the circumstances</e2>.,necessity,annotated
+76bf63bd-30f4-440d-81a0-61ca16170f70,Control should be maximised and heat gain to uninsulated pipes should only be permitted where the proportion of the cooling load relating to distribution pipework is less than 1 of the total load.,{'ID': '177_UK_DocM_V2_AccessAndUseOfBuildings'},Control should be maximised and heat gain to uninsulated pipes should only be permitted where the <e1>proportion of the cooling load relating to distribution pipework</e1> is less than 1 of the <e2>total load</e2>.,none,annotated
+9dd2a0f1-0ff9-4416-8abd-1e6589980ff4_8,,,"If the <e1>drop</e1> of a mechanical ventilation systems air duct is designed to be greater than <e2>20 millimetres</e2>, the outdoor air and exhaust air ducts shall be fitted with shutoff dampers that close automatically when the system shuts down.",greater,synthetic
+aa41a5d4-c0b1-4da7-84a0-5c2e2738654f_8,,,"The total number of ventilators installed in the dwellings habitable rooms and kitchens should be at least the following: Five ventilators if the dwelling has more than <e1>1,000 millimetres</e1> <e2>expanded metal</e2>.",greater,synthetic
+656aa2fa-18cb-41ee-ae28-28deb3dffcc3_4,,,The <e1>total floor area</e1> of the water in the hot water system shall be at least <e2>300mm</e2> and available from the hot water plumbing fixture within 20 seconds.,greater-equal,synthetic
+8feaf7f2-dfd8-43ae-ab8d-791ee1ffd86c,"However, if the elevation difference is no more than 1,000 millimetres, the ramp may not have a gradient of more than eight per cent.",{'ID': '9_Finnish_Accessibility'},"However, if the elevation difference is no more than 1,000 millimetres, the <e1>ramp</e1> may not have a <e2>gradient</e2> of more than eight per cent.",part-of,annotated
+4e8c5c50-44af-48f6-b959-e6f9b31afa1e_10,,,"If the planned time of use of a modular or portable building in a single location is less than two years, the only practical <e1>water removal system</e1> may be <e2>exit enclosure</e2>.",equal,synthetic
+c47598f9-df79-4d77-aba9-8f380342372f_10,,,extract air of <e1>total combined window area</e1> <e2>3.3m</e2> shall be conducted to the outdoors through individual extract air ducts.,equal,synthetic
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_4,,,Skirtings totalling up to 50mm total thickness and shallow projecting <e1>indoor steps</e1> or casings above <e2>100mm</e2> may be discounted when measuring clear width.,greater,synthetic
+4abb3268-3ba6-47e8-a8b7-4676dbaa9a16_8,,,"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide all means of escape routes with a minimum clear <e1>maximum number of occupants</e1> of <e2>900mm</e2>, except in doorways.",equal,synthetic
+1320873f-de9b-4c55-a7c0-67f545c4a46e,"All access routes to principal, or alternative accessible, entrances should be surfaced so that people are able to travel along them easily, without excessive effort and without the risk of tripping or falling.",{'ID': '42_UK_DocM_V2_AccessAndUseOfBuildings'},"All access routes to <e1>principal</e1>, or alternative accessible, <e2>entrances</e2> should be surfaced so that people are able to travel along them easily, without excessive effort and without the risk of tripping or falling.",selection,annotated
+992e8f11-81ac-4d2f-b7d1-60e46b4b7261,Wheelchair accessible dwellings must also provide both a level access shower and a bath.,{'ID': '108_UK_DocM_V1_AccessAndUseOfBuildings'},Wheelchair accessible dwellings must also provide both a <e1>level access</e1> shower and a <e2>bath</e2>.,selection,annotated
+825053cb-af5d-43a9-b59b-e2a5ae78ea73_10,,,The <e1>number of occupants</e1> of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the number of dwellings in the residential building; b. the <e2>intended purpose</e2> of associated parking spaces.,greater,synthetic
+13a437c0-918c-47f2-85bd-b80dd69eb027,"There are no limits on the design of display windows and similar glazing, but for new buildings their impact must be taken into account in the calculation of primary energy and CO2 emissions.",{'ID': '138_UK_DocM_V2_AccessAndUseOfBuildings'},"There are no limits on the <e1>design</e1> of display windows and similar <e2>glazing</e2>, but for new buildings their impact must be taken into account in the calculation of primary energy and CO2 emissions.",part-of,annotated
+164122ed-c7ac-4cf8-8a54-3d56c144f78d,"In general, the findings indicate that there should be at least the same number of WCs (for women) as urinals (for men) and for some building types, e.g. large retail buildings, at least twice as many.",{'ID': '172_UK_DocM_V2_AccessAndUseOfBuildings'},"In general, the findings indicate that there should be at least the <e1>same</e1> <e2>number</e2> of WCs (for women) as urinals (for men) and for some building types, e.g. large retail buildings, at least twice as many.",selection,annotated
+0aaf71f0-a482-4a72-a407-0d6db79c7f6f_6,,,"In a building consisting primarily of one storey, no more than 200 m2 of fire-compartmented and no more than <e1>3.3m</e1> of non-fire-compartmented <e2>light well</e2> that essentially relate to the business of the building may be located on the level of second storey.",less-equal,synthetic
+50e89a86-e2be-439d-b230-79274cd7199b_0,,,Modular and portable buildings with a planned <e1>widened</e1> of more than <e2>0.3</e2> at a single location should be shown to comply with the energy efficiency requirements.,greater,synthetic
+77f993c6-dff1-4f9a-8f66-73221d3cbaff_3,,,"If the dwelling only has one habitable room, a minimum <e1>room temperature</e1> of <e2>0.06 m2</e2> should be used.",greater-equal,synthetic
+f420ae57-5656-4558-b1a3-1079e46bf6cc_5,,,"In the case of the storey-level door of a dwelling, or if the <e1>target emission rate</e1> through the door exceeds <e2>850 millimetres</e2>, doors must open in the direction of the exit.",greater,synthetic
+31d635b2-1d32-49dd-a848-5b5acaf50128,"For existing dwellings, when installing a complete new or replacement system (e.g. replacing a heating system including the heating appliance, pipework and heat emitters), the energy performance of the whole system should be assessed.",{'ID': '407_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For existing dwellings, when installing a complete new or replacement system (e.g. replacing a heating system including the heating appliance, pipework and heat emitters), the <e1>energy performance</e1> of the whole system should be <e2>assessed</e2>.",necessity,annotated
+079db365-cfed-474e-9329-25349ac0db4a_9,,,"In connection with the door of an outside space of an individual dwelling the <e1>standards</e1> outside the door may be more than <e2>2.4m</e2> if the level difference can, with reasonable effort, be eliminated with equipment in the outdoor space.",greater,synthetic
+56517433-cf40-4b88-a9d4-18e61e0e9993,"In addition, on both sides of the toilet seat there shall be a free space of at least 800 millimetres.",{'ID': '55_Finnish_Accessibility'},"In addition, on both sides of the toilet seat there shall be a <e1>free space</e1> of at least <e2>800 millimetres</e2>.",greater-equal,annotated
+5f675f4f-74de-4d0f-ae92-c3500d2d952e,The actual equivalent area and location of installed background ventilators should be recorded.,{'ID': '189_UK_DocF_V1_Ventilation'},The actual equivalent area and <e1>location</e1> of installed <e2>background ventilators</e2> should be recorded.,part-of,annotated
+5b4380ba-0066-4735-a362-316d4c8e70b2,"Where a building undergoing major renovation, which is not a residential building or a mixeduse building, will have more than 10 parking spaces after the major renovation is completed (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.",{'ID': '73_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where a <e1>building</e1> undergoing major renovation, which is not a residential building or a mixeduse building, will have more than 10 parking spaces after the major renovation is completed (a) one of those <e2>parking spaces</e2> must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.",none,annotated
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_10,,,"In buildings more than 9 metres and at most <e1>One</e1> in <e2>service life</e2>, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",less-equal,synthetic
+5e7d4831-4ec8-48f9-9e60-0422fcc1eae4_10,,,"When replacing an existing system, the <e1>fire compartmenting requirement</e1> of the new system should be no less than <e2>storage capacity</e2> of the existing system, except where a smaller system can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",greater-equal,synthetic
+0cfe8c0e-45e4-4c4c-bf9b-906e26e28c75,"There should be sufficient space for people to approach the building, pass others who are travelling in the opposite direction and carry out all necessary manoeuvres.",{'ID': '43_UK_DocM_V2_AccessAndUseOfBuildings'},"There should be sufficient <e1>space</e1> for people to approach the building, pass others who are travelling in the opposite direction and <e2>carry out all necessary manoeuvres</e2>.",selection,annotated
+3ec0e36a-0227-4b76-9fd5-7a2f77877d99,A building that contains both living accommodation and space for commercial purposes (e.g. for a workshop or office) should be treated as a dwelling if the commercial part can be reverted to domestic use.,{'ID': '23_UK_DocM_V2_AccessAndUseOfBuildings'},A building that contains both living accommodation and <e1>space</e1> <e2>for commercial purposes</e2> (e.g. for a workshop or office) should be treated as a dwelling if the commercial part can be reverted to domestic use.,selection,annotated
+4d80c4d1-08ee-481a-9f9c-e9151ce1094d_3,,,"The <e1>cold side</e1> of windows, roof windows, rooflights and doors should not exceed <e2>20 litres per second</e2> of the total floor area of the dwelling.",less-equal,synthetic
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c_10,,,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be <e1>length</e1> <e2>9mm</e2>.",equal,synthetic
+05fdde92-d8af-42ad-963b-9019c69a8ab3,"For a timber frame where the intermediate floor structure breaches the external wall insulation, further insulation of the same thickness as the insulation used in the external wall should be included within the depth of the intermediate floor structure.",{'ID': '163_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For a timber frame <e1>where the intermediate floor structure breaches the external wall insulation</e1>, further insulation of the same thickness as the insulation used in the external wall should be <e2>included within the depth of the intermediate floor structure</e2>.",none,annotated
+64695439-3458-4d43-8e7b-a2ba75075cea,"There must be safe and easily accessible, uninterrupted access routes to any chimneys, ventilation equipment and other building equipment and structural elements that are located on the roof of the building and that must be accessed regularly.",{'ID': '124_Finnish_SafetyOfUse'},"There must be <e1>safe</e1> and easily accessible, uninterrupted <e2>access routes</e2> to any chimneys, ventilation equipment and other building equipment and structural elements that are located on the roof of the building and that must be accessed regularly.",selection,annotated
+f0c72b35-5a0a-4554-8713-96f6f73a67f1_11,,,A cube with <e1>target emission rate</e1> of no more than <e2>300mm</e2> may pass between the lower edge of a barriers protective part and the landing or the upper surface or edge of a step.,less-equal,synthetic
+6075de3c-d339-4ba4-9945-990480975615_9,,,"Where a kitchen and living room accommodation are not separate rooms (i.e. open plan), no fewer than <e1>One</e1> <e2>building</e2> of the same equivalent area as for other habitable rooms should be provided within the open-plan space.",greater-equal,synthetic
+5fa7daca-cb50-4397-a736-617e52d30187_7,,,"If efficiencies at below 30% are required and unavailable, the <e1>flow rate</e1> may be taken as equal to that at <e2>850 millimetres</e2>.",equal,synthetic
+29c431ee-ea93-491d-ab13-06418d93c488_10,,,"If <e1>deep</e1> is greater than <e2>eight per cent</e2>, manual control is acceptable.",greater,synthetic
+0d8c2f7d-5234-4bec-bbbe-961e499ebbbc,"A proportion of the sleeping accommodation in hotels, motels and student accommodation should be designed for independent use by wheelchair users.",{'ID': '129_UK_DocM_V2_AccessAndUseOfBuildings'},"A <e1>proportion</e1> of the <e2>sleeping accommodation</e2> in hotels, motels and student accommodation should be designed for independent use by wheelchair users.",part-of,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479,Individual flights are: for gradients up to 1:15 not more than 10m long; for gradients up to 1:12 not more than 5m long.,{'ID': '18_UK_DocM_V1_AccessAndUseOfBuildings'},Individual flights are: for gradients up to 1:15 not more than 10m long; for <e1>gradients</e1> up to <e2>1:12</e2> not more than 5m long.,less-equal,annotated
+8e5e9560-4b22-4fe0-ad86-e52b82ffe4d2,"When  calculating  the  energy  consumption  of  a  buildings  cooling  system,  the  energy consumption of cooling energy production and the electrical energy consumption of auxiliary units  shall  be  taken  into  account  where  the  use  of  the  systems  is  required  for  indoor temperature control.",{'ID': '111_Finnish_EnergyEfficiency'},"When calculating the energy consumption of a buildings cooling system, the <e1>energy consumption</e1> of <e2>cooling energy production</e2> and the electrical energy consumption of auxiliary units shall be taken into account where the use of the systems is required for indoor temperature control.",part-of,annotated
+38cd3221-7fc9-4462-be20-78b16a4309d3_2,,,The <e1>ending</e1> of openings in the newly created dwelling should not be more than <e2>120</e2> of the total floor area.,less-equal,synthetic
+37f01a2c-b944-45a2-a7f4-140d8c03d7ac,"After rebating, frame components should retain at least 32mm of timber.",{'ID': '29_UK_DocQ_Security_Dwellings'},"<e1>After rebating</e1>, <e2>frame components</e2> should retain at least 32mm of timber.",selection,annotated
+d925c189-860a-4fcb-ae88-d1cf8cc14fb8_9,,,"The tread of steps in covered or heated outdoor staircases must be no less than 300 millimetres, and the <e1>class</e1> may be no more than <e2>four</e2>.",less-equal,synthetic
+38cd3221-7fc9-4462-be20-78b16a4309d3_11,,,The <e1>fire igniting</e1> of openings in the newly created dwelling should not be more than <e2>300 millimetres</e2> of the total floor area.,less-equal,synthetic
+8421f806-70f2-46a9-a308-90a40da3541d,"Where the gradient of the approach, whether over its whole length or in part, is 1:20 or steeper, that part of the approach should be designed as ramped access.",{'ID': '41_UK_DocM_V2_AccessAndUseOfBuildings'},"Where the gradient of the approach, whether over its whole length or in part, is 1:20 or steeper, <e1>that part</e1> of the <e2>approach</e2> should be designed as ramped access.",part-of,annotated
+8aa4b706-1659-4e30-a4fe-e7f33efe3241_0,,,All <e1>three seconds</e1> <e2>Window handles</e2> of the compliance checklist should be completed.,equal,synthetic
+5305da48-b810-4fd8-a0b3-7520f89ff401,"When installing or renovating thermal elements, the element being installed should be draught-proofed, and air-leakage gaps should be filled.",{'ID': '194_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When installing or renovating thermal elements, the element <e1>being installed</e1> should be <e2>draught-proofed</e2>, and air-leakage gaps should be filled.",none,annotated
+13a437c0-918c-47f2-85bd-b80dd69eb027_7,,,"There are no <e1>air flow resistance</e1> on the <e2>Ventilation</e2> of display windows and similar glazing, but for new buildings their impact must be taken into account in the calculation of primary energy and CO2 emissions.",not-part-of,synthetic
+0da52584-1b37-48b5-840f-3795ae695275_1,,,the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where <e1>one metre</e1> <e2>Heating systems</e2> are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_6,,,"The free opening of the vertical hatch or window of an emergency exit must be at least <e1>8 per cent (1:12.5)</e1> in <e2>condition</e2> and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",greater-equal,synthetic
+eefe1191-2903-4fb8-9138-6471e09fb67d_9,,,The <e1>flow rate</e1> exceeds <e2>190  millimetres</e2> at 11pm.,greater,synthetic
+4d54279f-8590-4a58-86d5-afb7f3069870,"The apartment-specific water meters shall be located in a place where they are easy to install, read and service.",{'ID': '75_Finnish_Health-WaterAndSewerage'},"The apartment-specific <e1>water meters</e1> shall be <e2>located in a place where they are easy to install, read and service</e2>.",necessity,annotated
+569c7958-b7d6-4b9c-9dd9-13307e95e59b,"For ducted systems that are served by fans with a design flow rate greater than 1m3/s, ductwork leakage tests should be carried out.",{'ID': '385_UK_DocM_V2_AccessAndUseOfBuildings'},"For <e1>ducted systems</e1> that are <e2>served by fans</e2> with a design flow rate greater than 1m3/s, ductwork leakage tests should be carried out.",selection,annotated
+5577528f-8fa0-4ca3-96f6-ea418091cb86,The side edges of stairs and landings must be fitted with a raised camber to prevent slipping over the edge if a cube measuring more than 50 millimetres in width is able to pass through the opening between the plane level and the handrail or wall.,{'ID': '32_Finnish_SafetyOfUse'},The side edges of <e1>stairs</e1> and landings must be <e2>fitted with a raised camber to prevent slipping over the edge</e2> if a cube measuring more than 50 millimetres in width is able to pass through the opening between the plane level and the handrail or wall.,none,annotated
+956efc87-87de-4d3c-99fb-dc58eab9353b_10,,,A dwelling that is intended for sheltered housing or supported housing of a person with mobility or functional impairment shall have at least one toilet and washing facility which has a free space with a <e1>quality of the installation</e1> of at least <e2>1.501kWhPE/kWh</e2>.,greater-equal,synthetic
+7f696221-52c9-4c52-8f90-74bd93c51299,This grippable handrail is 850-1000mm above the pitch line of the flight and extends at least 300mm beyond the top and bottom nosings.,{'ID': '73_UK_DocM_V1_AccessAndUseOfBuildings'},This grippable handrail is <e1>850-1000mm</e1> above the pitch line of the flight and <e2>extends</e2> at least 300mm beyond the top and bottom nosings.,none,annotated
+2afa8bba-b5ad-4e12-bc27-4beea3fd09b2,The normal relationship between the dimensions of the rise and going is: twice the rise plus the going (2R G) equals between 550mm and 700mm.,{'ID': '19_UK_DocK_ProtectionFromFalling'},The normal relationship between the <e1>dimensions</e1> of the rise and <e2>going</e2> is: twice the rise plus the going (2R G) equals between 550mm and 700mm.,part-of,annotated
+3153d771-404e-4a54-ac05-ed1b75e37506_4,,,"Gangways should not be less than <e1>A</e1> <e2>category</e2> unless used by not more than 50 persons, in which case gangways should be a minimum of 900mm.",greater-equal,synthetic
+50e89a86-e2be-439d-b230-79274cd7199b,Modular and portable buildings with a planned service life of more than two years at a single location should be shown to comply with the energy efficiency requirements.,{'ID': '81_UK_DocM_V2_AccessAndUseOfBuildings'},Modular and <e1>portable</e1> <e2>buildings</e2> with a planned service life of more than two years at a single location should be shown to comply with the energy efficiency requirements.,selection,annotated
+29232335-402c-4ed9-af74-fd093ac22e28_6,,,The natural or mechanical ventilation system of a building shall be strong and its air-tightness shall be at least <e1>rise between landings</e1> <e2>100</e2>.,greater-equal,synthetic
+984c252b-74f4-4d85-9080-1c8ae1851eca_6,,,"If performance requires thicker glass to be used, an equivalent window unit with <e1>cross-sectional area</e1> (<e2>30m2</e2>) glazing should be shown to meet the required standard.",equal,synthetic
+53e31e26-a39b-4047-a86e-bdb8021413e8_10,,,Window handles on windows that open outwards are not more than <e1>600 millimetres</e1> <e2>maximum capacity</e2> when the window is at its maximum openable angle.,less-equal,synthetic
+533762d6-e592-494d-a08b-a0817b5b4f9f,"If there are associated parking spaces where there is not a requirement to install electric vehicle charge points, cable routes must be installed in all remaining associated parking spaces.",{'ID': '50_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If there are associated parking spaces where there is not a requirement to install electric vehicle charge points, <e1>cable routes</e1> must be <e2>installed in all remaining associated parking spaces</e2>.",necessity,annotated
+405a2082-beb9-4c5f-bc9f-d688b72e723b,Intermediate floors: floor-to-wall junctions should be detailed to ensure that insulation in the external wall is continuous.,{'ID': '162_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Intermediate</e1> <e2>floors</e2>: floor-to-wall junctions should be detailed to ensure that insulation in the external wall is continuous.,selection,annotated
+a387fcb8-ead2-4094-9be9-72d783468b33,"If the area of windows, roof windows, rooflights and doors exceeds 25 of the total floor area of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",{'ID': '422_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If the area of windows, roof windows, rooflights and doors exceeds 25 of the <e1>total floor area</e1> of the <e2>dwelling</e2>, compensating measures should be taken to improve the energy efficiency of the dwelling.",part-of,annotated
+a387fcb8-ead2-4094-9be9-72d783468b33_4,,,"If the <e1>air leakage rate figure</e1> of windows, roof windows, rooflights and doors exceeds <e2>30% load</e2> of the total floor area of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",greater,synthetic
+baee716c-b8c2-4500-b4de-63fa11f007b1_1,,,A minimum of one in <e1>32mm</e1> of the remaining <e2>energy declaration</e2> must have access to cable routes.,equal,synthetic
+793cb939-b3d9-46eb-ae65-71a4d5c8031b_1,,,Where the <e1>site</e1> is within the private curtilage of the dwelling (but not within a carport or <e2>blocks of flats</e2>) at least one space is a standard parking bay that can be widened to 3.3m.,not-part-of,synthetic
+f5a71c7b-e852-40f2-8f88-91cda7902a7e,"If a new building has a space heating or airconditioning system with an effective rated output greater than 180kW, a building automation and control system should be installed.",{'ID': '319_UK_DocM_V2_AccessAndUseOfBuildings'},"If a new building has a space heating or airconditioning system with an effective rated output greater than <e1>180kW</e1>, a <e2>building automation and control system</e2> should be installed.",none,annotated
+77f993c6-dff1-4f9a-8f66-73221d3cbaff,"If the dwelling only has one habitable room, a minimum ventilation rate of 13l/s should be used.",{'ID': '43_UK_DocF_V1_Ventilation'},"If the dwelling only has one habitable room, a minimum <e1>ventilation rate</e1> of <e2>13l/s</e2> should be used.",greater-equal,annotated
+9ebe07e9-8381-451a-9ab8-701912478b30,The air flow rate of all mechanical ventilation fans should be tested.,{'ID': '210_UK_DocF_V1_Ventilation'},The air flow rate of all <e1>mechanical</e1> <e2>ventilation fans</e2> should be tested.,selection,annotated
+079db365-cfed-474e-9329-25349ac0db4a,"In connection with the door of an outside space of an individual dwelling the level difference outside the door may be more than 20 millimetres if the level difference can, with reasonable effort, be eliminated with equipment in the outdoor space.",{'ID': '21_Finnish_Accessibility'},"In connection with the door of an outside space of an <e1>individual</e1> <e2>dwelling</e2> the level difference outside the door may be more than 20 millimetres if the level difference can, with reasonable effort, be eliminated with equipment in the outdoor space.",selection,annotated
+f06f7ec1-3b83-4e1a-a421-b09589f2374c,"Provision shall be made to prevent any door or gate: (a) which slides or opens upwards, from falling onto any person; and (b) which is powered, from trapping any person.",{'ID': '114_UK_DocK_ProtectionFromFalling'},"<e1>Provision</e1> shall be <e2>made to prevent</e2> any door or gate: (a) which slides or opens upwards, from falling onto any person; and (b) which is powered, from trapping any person.",necessity,annotated
+05698d4d-c140-4bce-94b3-386ce02baa6b,The storm water sewers within the building shall be equipped with condensation insulation.,{'ID': '169_Finnish_Health-WaterAndSewerage'},The <e1>storm water sewers</e1> within the building shall be equipped with <e2>condensation insulation</e2>.,necessity,annotated
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_7,,,"In buildings more than 9 metres and at most <e1>15</e1> in <e2>absence</e2>, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",less-equal,synthetic
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_9,,,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and <e1>0.9 metres</e1> in <e2>extract air categories</e2>; however, the sum of these must be at least 1,500 millimetres.",greater-equal,synthetic
+b5edf19f-56df-436a-89f0-9ab5bf6963ea,"If necessary, fire compartments shall be partitioned in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",{'ID': '106_Finnish_FireSafety'},"If necessary, <e1>fire compartments</e1> shall be partitioned in order to <e2>restrict the spread of fire and smoke</e2>, to provide safe evacuation and to facilitate rescue and extinguishing measures.",none,annotated
+a387fcb8-ead2-4094-9be9-72d783468b33,"If the area of windows, roof windows, rooflights and doors exceeds 25 of the total floor area of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",{'ID': '422_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If the area of windows, roof windows, <e1>rooflights</e1> and <e2>doors</e2> exceeds 25 of the total floor area of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",none,annotated
+dcc583b1-8c4c-42cf-a1ed-e8907de56254,"The rise of the indoor steps of other spaces intended for everyday use may be no more than 180 millimetres, and the tread must be no less than 270 millimetres.",{'ID': '23_Finnish_SafetyOfUse'},"The <e1>rise</e1> of the indoor steps of other spaces intended for everyday use may be no more than <e2>180 millimetres</e2>, and the tread must be no less than 270 millimetres.",less-equal,annotated
+45338082-ca66-418b-8fe1-8f2be926f330_8,,,A <e1>early childhood education premises</e1> of no more than <e2>twice the rise plus the going (2R G)</e2> may pass between the stair steps.,less-equal,synthetic
+eefe1191-2903-4fb8-9138-6471e09fb67d_8,,,The <e1>surface area</e1> exceeds <e2>600 millimetres</e2> at 11pm.,greater,synthetic
+b4cef2a7-038c-4f72-8ea6-20e43d766165,"The building primary energy rate and building emission rate submission should be accompanied by a report, signed by a suitably qualified person, detailing how the CO2 emission factors and primary energy factors have been derived.",{'ID': '70_UK_DocM_V2_AccessAndUseOfBuildings'},"The building primary energy rate and <e1>building emission rate</e1> <e2>submission</e2> should be accompanied by a report, signed by a suitably qualified person, detailing how the CO2 emission factors and primary energy factors have been derived.",part-of,annotated
+956efc87-87de-4d3c-99fb-dc58eab9353b,"A  dwelling  that  is  intended  for  sheltered  housing  or  supported  housing  of  a  person  with mobility or functional impairment shall have at least one toilet and washing facility which has a  free  space  with  a  diameter  of  at  least  1,500  millimetres.",{'ID': '42_Finnish_Accessibility'},"A dwelling that is intended for sheltered housing or supported housing of a person with mobility or functional impairment shall have at least <e1>one</e1> <e2>toilet and washing facility</e2> which has a free space with a diameter of at least 1,500 millimetres.",greater-equal,annotated
+208b093d-361f-4aec-819d-4abca4e72c68_11,,,"in an evacuation area where the <e1>exit</e1> is <e2>2m</e2>, the second exit may be no less than 900 millimetres in width.",equal,synthetic
+3f7c10d1-d801-4351-bc85-187cf8cffeb3,The water vapour resistance and air tightness of external walls and their various layers as well as the structures attached to the external wall and joints to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,{'ID': '96_Finnish_Health-Humidity'},The water vapour resistance and air tightness of external walls and their various layers as well as the <e1>structures</e1> attached to the external <e2>wall</e2> and joints to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,part-of,annotated
+ae098b28-f01d-44df-b601-b7ac7631101d,"On stairs and ramps, a handrail must be installed for the entire length and on both sides of the structure.",{'ID': '54_Finnish_SafetyOfUse'},"On stairs and <e1>ramps</e1>, a <e2>handrail</e2> must be installed for the entire length and on both sides of the structure.",none,annotated
+72d7716f-7e3e-442c-9e42-14d4b19e18e3,A district heat network that is being connected to a new building should not have a CO2 emission factor for delivered heat to the building which is greater than 0.350kgCO2/kWh.,{'ID': '336_UK_DocM_V2_AccessAndUseOfBuildings'},A district heat network that is being <e1>connected to a new building</e1> should not have a <e2>CO2 emission factor</e2> for delivered heat to the building which is greater than 0.350kgCO2/kWh.,none,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",{'ID': '84_Finnish_Health-IndoorClimateAndVentilation'},"If the <e1>air flows</e1> of extract air categories 1 and 2 are <e2>combined into the same duct</e2> and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",selection,annotated
+500fc416-e652-4a2c-8dd3-8d9754ea1829,There should be no visible mould on the inner surfaces of external walls of a properly heated building with typical moisture generation.,{'ID': '115_UK_DocF_V2_Ventilation'},There should be no visible mould on the <e1>inner surfaces</e1> of external walls of a <e2>properly heated</e2> building with typical moisture generation.,none,annotated
+c0a6d35c-cc20-428b-941d-c3e3e6365c74_6,,,"In a tier that is uninterrupted by cross-gangways, and where the pitch exceeds 25, use a <e1>potentially flammable</e1> number of steps of <e2>9mm</e2>.",equal,synthetic
+3f7c10d1-d801-4351-bc85-187cf8cffeb3,The water vapour resistance and air tightness of external walls and their various layers as well as the structures attached to the external wall and joints to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,{'ID': '96_Finnish_Health-Humidity'},The water vapour resistance and air tightness of <e1>external</e1> <e2>walls</e2> and their various layers as well as the structures attached to the external wall and joints to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,selection,annotated
+7d877df3-9aa7-4dff-a64d-5356a66c944d,"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a width exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",{'ID': '59_Finnish_SafetyOfUse'},"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of <e1>stairs</e1> or ramps that have a width exceeding 2.4 metres and are <e2>located in assembly areas</e2>, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",selection,annotated
+8805ec9f-3f5f-44fc-9078-3ae62439c973,"NOTE: When a single U-value is calculated for a product range of doors, the configuration of the door chosen for the calculation should be the worst performing in the product range.",{'ID': '108_UK_DocL_V1_ConsrvationOfFuelAndPower'},"NOTE: When a <e1>single</e1> U-value is calculated for a product range of doors, the configuration of the door <e2>chosen for the calculation</e2> should be the worst performing in the product range.",none,annotated
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c_6,,,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be <e1>exposure coefficient</e1> <e2>50</e2>.",equal,synthetic
+a0d4a888-a5f8-449e-b28c-43fd1003dca3, The fire compartment shall be partitioned by accommodation room.,{'ID': '258_Finnish_FireSafety'},The <e1>fire compartment</e1> shall be <e2>partitioned by accommodation room</e2>.,necessity,annotated
+7d877df3-9aa7-4dff-a64d-5356a66c944d,"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a width exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",{'ID': '59_Finnish_SafetyOfUse'},"In public outdoor and indoor spaces, and in <e1>business</e1> and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a <e2>width</e2> exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",none,annotated
+38745b5e-4dea-43fe-9378-5befa5a2399d,A copy of the completed commissioning sheet should be given to the owner of the building.,{'ID': '99_UK_DocF_V2_Ventilation'},A <e1>copy</e1> of the <e2>completed</e2> commissioning sheet should be given to the owner of the building.,none,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",{'ID': '83_Finnish_SafetyOfUse'},"The free opening of the vertical hatch or <e1>window</e1> of an emergency exit must be at least 600 millimetres in height and <e2>500 millimetres</e2> in width; however, the sum of these must be at least 1,500 millimetres.",none,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479_8,,,Individual flights are: for gradients up to 1:15 not more than 10m long; for <e1>maintained</e1> up to <e2>four</e2> not more than 5m long.,less-equal,synthetic
+76acc6bd-50c0-4f3f-b015-42e171ec6ce7_8,,,<e1>40 degrees Celsius</e1> <e2>chamber</e2> must be installed.,equal,synthetic
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_9,,,"In buildings more than 9 metres and at most 28 metres in height, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than <e1>50 m</e1> in <e2>boiler efficiency</e2>, these must be accessible via the interior.",greater,synthetic
+3c0a8ccb-d813-40fb-b69b-88250d3bc4ec_5,,,"These fittings should not exceed a <e1>combined dead,imposed and wind loads</e1> of <e2>2.5 ties/m2</e2>.",less-equal,synthetic
+43a7a088-718f-4a11-a392-88e71559466e,"In exceptional circumstances in an existing building, a wheelchair platform stairlift may be considered, provided its installation does not conflict with requirements for means of escape.",{'ID': '107_UK_DocM_V2_AccessAndUseOfBuildings'},"In exceptional circumstances in an existing building, a <e1>wheelchair platform stairlift</e1> may be <e2>considered, provided its installation does not conflict with requirements for means of escape</e2>.",necessity,annotated
+6a553c19-481f-4947-9047-fd2c4d0daa44,"Any floors, walls and doors that have been installed to allow the potential liftway to be used as storage or for other purposes could be easily removed without structural alteration.",{'ID': '83_UK_DocM_V1_AccessAndUseOfBuildings'},"Any <e1>floors</e1>, walls and doors that have been installed to allow the potential liftway to be used as storage or for other purposes could be <e2>easily removed without structural alteration</e2>.",necessity,annotated
+fb5d3054-4911-4049-ba09-1c3e80f9c07c_2,,,"The tread of steps in uncovered or unheated outdoor staircases must be no less than 390 millimetres, and the <e1>one side</e1> may be no more than <e2>600kg/m3</e2>.",less-equal,synthetic
+34a524ec-6994-426f-86af-78788fd34a80_8,,,"Between the locking points for the mortice lock and surface-mounted rim lock, the <e1>Air permeability</e1> should be <e2>2.4m</e2>.",equal,synthetic
+203faa23-7b71-47c9-a6e5-2333ac45389e,"The riser of the indoor steps of dwelling units and living quarters  may  be  no  more  than  190  millimetres,  and  the  tread  must  be  no  less  than  250 millimetres.",{'ID': '22_Finnish_SafetyOfUse'},"The <e1>riser</e1> of the <e2>indoor steps</e2> of dwelling units and living quarters may be no more than 190 millimetres, and the tread must be no less than 250 millimetres.",part-of,annotated
+a8b3e54e-902c-4502-99a2-8c41d46f1416,"If there are more than 60 chairs in a space, they must be linked to one another in at least four groups, unless the chairs are placed around tables.",{'ID': '106_Finnish_SafetyOfUse'},"If there are more than 60 <e1>chairs</e1> in a <e2>space</e2>, they must be linked to one another in at least four groups, unless the chairs are placed around tables.",part-of,annotated
+4abb3268-3ba6-47e8-a8b7-4676dbaa9a16_2,,,"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide all means of escape routes with a minimum clear <e1>maximum capacity</e1> of <e2>190  millimetres</e2>, except in doorways.",equal,synthetic
+06c2e0f7-69c8-47ec-bf31-9902ae9df7cf,"Provision shall be made for any windows, skylights, or any transparent or translucent walls, ceilings or roofs to be safely accessible for cleaning.",{'ID': '109_UK_DocK_ProtectionFromFalling'},"Provision shall be made for any <e1>windows</e1>, skylights, or any transparent or translucent walls, ceilings or roofs to <e2>be safely accessible for cleaning</e2>.",necessity,annotated
+4abb3268-3ba6-47e8-a8b7-4676dbaa9a16_11,,,"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide all means of escape routes with a minimum clear <e1>combined dead,imposed and wind loads</e1> of <e2>56 metres</e2>, except in doorways.",equal,synthetic
+e43c1e88-be80-42d9-944e-1bf0f0f82479,Individual flights are: for gradients up to 1:15 not more than 10m long; for gradients up to 1:12 not more than 5m long.,{'ID': '18_UK_DocM_V1_AccessAndUseOfBuildings'},Individual <e1>flights</e1> are: for <e2>gradients</e2> up to 1:15 not more than 10m long; for gradients up to 1:12 not more than 5m long.,selection,annotated
+5e51b653-449e-4d00-be19-0e20ecff5c49_3,,,The default <e1>wide</e1> should be <e2>300mm</e2>.,equal,synthetic
+c952db0f-b605-4335-8d56-97fc339ad5ba_11,,,All <e1>1m2</e1> <e2>construction layers</e2> of the installation and commissioning checklist should be completed.,equal,synthetic
+fb1da22f-8ddb-4399-b441-64dca68da9af_11,,,"If a lift or other device for moving between levels is installed in the exit of an existing building, the dwellings exit may be no less than <e1>1</e1> <e2>agreed level of provision</e2>.",greater-equal,synthetic
+e320322e-3aee-4167-ad19-a6c6cc41f597,The water system shall incorporate: 1) a pressure gauge; 2) thermometers in the water pipe of mixed domestic hot water from the water heater and in the domestic hot water ring duct to measure the temperature of return water; 3) throttling valves.,{'ID': '97_Finnish_Health-WaterAndSewerage'},The water system shall incorporate: 1) a pressure gauge; 2) thermometers in the <e1>water pipe</e1> of <e2>mixed domestic hot water</e2> from the water heater and in the domestic hot water ring duct to measure the temperature of return water; 3) throttling valves.,selection,annotated
+2fad9e0f-fa0d-4a6b-9c63-152ef8828c4d_9,,,An upstand built on site should not exceed a <e1>annual efficiency of heat recovery from ventilation extract air</e1> of <e2>1m3/s</e2>.,less-equal,synthetic
+009e12eb-db83-485c-9ffc-e1f462251109_8,,,Each air terminal should have a <e1>sheathing board</e1> of at least <e2>190  millimetres</e2> of the free area of its associated duct.,greater-equal,synthetic
+c33e482e-252a-4e99-a905-7861a480d024,"Geo-location should be enabled to confirm the location, date and time of each image.",{'ID': '484_UK_DocL_V1_ConsrvationOfFuelAndPower'},"<e1>Geo-location</e1> should be <e2>enabled to confirm the location, date and time</e2> of each image.",selection,annotated
+922bf8df-3a70-4f45-8c04-200b638d3b3c_9,,,The cold water pipe shall be designed and installed so that the <e1>reverberation time</e1> in the cold water system may not exceed <e2>1m3/s</e2>.,less-equal,synthetic
+12f51746-1632-4628-9d8a-98dcf58ed9fc,Doors must be capable of opening outwards - in wheelchair adaptable bathrooms the door may open inwards providing that the door can be easily rehung to open outwards (e.g. door stops are planted and easily moved).,{'ID': '116_UK_DocM_V1_AccessAndUseOfBuildings'},<e1>Doors</e1> must be <e2>capable of opening outwards</e2> - in wheelchair adaptable bathrooms the door may open inwards providing that the door can be easily rehung to open outwards (e.g. door stops are planted and easily moved).,necessity,annotated
+457ecdc0-8247-4ad4-9beb-3b7a31cfa0fd,"All public areas, including lavatory accommodation, public telephones and external terraces should be accessible.",{'ID': '138_UK_DocM_V2_AccessAndUseOfBuildings'},"All public areas, including lavatory accommodation, <e1>public</e1> telephones and external <e2>terraces</e2> should be accessible.",none,annotated
+302c413e-fefd-47f1-914f-0dc787e4a761_7,,,"Where <e1>drop</e1> on surfaces is greater than <e2>850 millimetres</e2>, a difference in light reflectance value should be a minimum of 20 points.",greater,synthetic
+493ec553-7761-4d1e-aa98-05d925ddf955,The opening of a horizontal hatch must be at least 600 x 600 millimetres.,{'ID': '84_Finnish_SafetyOfUse'},The <e1>opening</e1> of a horizontal hatch must be at least <e2>600 x 600 millimetres</e2>.,greater-equal,annotated
+5b4380ba-0066-4735-a362-316d4c8e70b2,"Where a building undergoing major renovation, which is not a residential building or a mixeduse building, will have more than 10 parking spaces after the major renovation is completed (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.",{'ID': '73_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where a <e1>building</e1> undergoing major renovation, which is not a residential building or a mixeduse building, will have more than 10 <e2>parking spaces</e2> after the major renovation is completed (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.",necessity,annotated
+d82c4149-8daa-48b2-8f46-c959a5f9ebe3,"Artificial lighting should be designed to give good colour rendering of all surfaces, without creating glare or pools of bright light and strong shadows.",{'ID': '152_UK_DocM_V2_AccessAndUseOfBuildings'},"Artificial <e1>lighting</e1> should be <e2>designed to give good colour rendering of all surfaces, without creating glare or pools of bright light and strong shadows</e2>.",necessity,annotated
+ebb26e9f-622f-4faa-a2c8-997158e30499,Mortar snots should be removed to ensure a tight fit with the structure and cavities cleared of all debris.,{'ID': '142_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Mortar snots</e1> should be <e2>removed to ensure a tight fit with the structure and cavities cleared of all debris</e2>.,necessity,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_5,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the <e1>number of people evacuating</e1> from these spaces does not exceed <e2>6mm</e2> of the total air flow in the vertical duct.",less-equal,synthetic
+793cb939-b3d9-46eb-ae65-71a4d5c8031b_8,,,Where the <e1>pipes</e1> is within the private curtilage of the dwelling (but not within a carport or <e2>thermal energy streams</e2>) at least one space is a standard parking bay that can be widened to 3.3m.,not-part-of,synthetic
+eccc60e7-3d76-46c0-a9d9-e398bf3e475a,The part of the dwelling above ground level should be considered separately.,{'ID': '71_UK_DocF_V1_Ventilation'},The part of the dwelling <e1>above ground level</e1> should be <e2>considered separately</e2>.,none,annotated
+d504fd87-d13d-4936-9d7a-71d17954760d_6,,,The <e1>heat recovery</e1> of the steps in an exit may be no more than <e2>0.055555556</e2>.,less-equal,synthetic
+bde1697a-20c9-4f15-a63c-5be323a058c1,Any connection of two or more air handling units to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,{'ID': '90_Finnish_Health-IndoorClimateAndVentilation'},Any <e1>connection</e1> of two or more air handling units to the same duct or chamber shall be <e2>designed</e2> so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,necessity,annotated
+d2b6e6e7-1545-4d84-ae81-e136edd3be74,A handrail must be designed and shaped so that it allows a firm grip.,{'ID': '56_Finnish_SafetyOfUse'},A <e1>handrail</e1> must be <e2>designed and shaped</e2> so that it allows a firm grip.,necessity,annotated
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9,"In buildings more than 9 metres and at most 28 metres in height, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",{'ID': '126_Finnish_SafetyOfUse'},"In buildings more than <e1>9 metres</e1> and at most 28 metres in <e2>height</e2>, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",greater,annotated
+339fc78c-a2f2-481c-a410-3aeb41e24b8a_5,,,Solid walls constructed of coursed brickwork or blockwork should be at least as <e1>total combined window area</e1> as <e2>6mm</e2> of the storey height.,greater-equal,synthetic
+7f49ccb1-ce2c-47eb-8b22-2c8e806e5d88_0,,,The resilient layer should be to the full height of the door and <e1>adequate means</e1> <e2>shape</e2> of the doorset.,equal,synthetic
+b5addb77-be99-45a2-8dc0-fdf5d1969a57,Each column and wall shall be supplied with continuous vertical ties from the foundations to the roof level.,{'ID': '194_Finnish_StabilityOfStructures'},Each column and wall shall be supplied with <e1>continuous</e1> vertical <e2>ties</e2> from the foundations to the roof level.,selection,annotated
+09b2a395-5293-4b7d-82d4-5312482d59e9,"Door entry controls, where provided, are mounted 900-1000mm above finished ground level, and at least 300mm away from any projecting corner.",{'ID': '46_UK_DocM_V1_AccessAndUseOfBuildings'},"<e1>Door entry controls</e1>, where provided, are mounted 900-1000mm above finished ground level, and at least <e2>300mm</e2> away from any projecting corner.",selection,annotated
+45b99da0-5bce-49b7-9ce2-04810c7e5a19,"For recessed meter boxes on the cold side of the construction, insulation should be installed behind the enclosure.",{'ID': '151_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For recessed <e1>meter boxes</e1> on the cold side of the construction, <e2>insulation</e2> should be installed behind the enclosure.",part-of,annotated
+e505b13c-7b62-4857-aa2d-544dc986e9c0_5,,,"For dwellings, for external tapered steps and stairs that are part of the building the <e1>riser</e1> of each step should be a minimum of <e2>0.7 metres</e2>.",greater-equal,synthetic
+fb5d3054-4911-4049-ba09-1c3e80f9c07c,"The tread of steps in uncovered or unheated outdoor staircases must be no less than 390 millimetres, and the riser may be no more than 130 millimetres.",{'ID': '29_Finnish_SafetyOfUse'},"The tread of steps in <e1>uncovered</e1> or unheated outdoor <e2>staircases</e2> must be no less than 390 millimetres, and the riser may be no more than 130 millimetres.",selection,annotated
+fb1da22f-8ddb-4399-b441-64dca68da9af,"If a lift or other device for moving between levels is installed in the exit of an existing building, the dwellings exit may be no less than 850 millimetres wide.",{'ID': '218_Finnish_FireSafety'},"If a lift or other device for moving between levels is installed in the exit of an <e1>existing</e1> building, the dwellings exit may be no less than <e2>850 millimetres</e2> wide.",none,annotated
+ec1783bd-3e59-42d6-9709-cd0cc7d2c365,The air flow resistance of all components should be considered when specifying ventilation systems.,{'ID': '55_UK_DocF_V1_Ventilation'},The <e1>air flow resistance</e1> of all components should be <e2>considered when specifying ventilation systems</e2>.,necessity,annotated
+36650de0-ef3c-4fd1-8199-f47c0e576076_9,,,the <e1>total capital cost</e1> of the platform does not exceed <e2>300mm</e2>.,less-equal,synthetic
+f2bf62e6-9577-48b5-b15d-9fe4904acf52,"Where controls are integrated in the heater, the system should be provided with a time switch/programmer and room temperature sensor linked to heater firing and fan speed control.",{'ID': '268_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where controls are integrated in the heater, the system should be provided with a <e1>time switch/programmer</e1> and <e2>room temperature sensor</e2> linked to heater firing and fan speed control.",none,annotated
+cf152151-90f9-47d0-9e4e-5a1cd813d4e5,System controls should be wired so that when there is no demand for space heating or hot water the heating appliance and pump are switched off.,{'ID': '247_UK_DocL_V1_ConsrvationOfFuelAndPower'},System controls should be <e1>wired</e1> so that <e2>when there is no demand for space heating or hot water the heating appliance and pump are switched off</e2>.,selection,annotated
+7f3f59a4-fc7e-4b14-8074-384f6cacf548_7,,,"The <e1>heat gain</e1> of a barrier in a dwellings indoor areas may, however, be at least <e2>0.055555556</e2> if the drop is less than three metres.",greater-equal,synthetic
+9fee4426-8d7f-40f9-bc6f-562a5d3fd9b4,"For roofs insulated at ceiling level, the long-term protection of the insulation layer should be considered: boarded areas should be provided above the insulation to give access for maintenance.",{'ID': '144_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For <e1>roofs</e1> insulated at ceiling level, the long-term <e2>protection</e2> of the insulation layer should be considered: boarded areas should be provided above the insulation to give access for maintenance.",none,annotated
+81f14fc1-af5d-45e8-8725-94d2510e4701,"A dwelling that is intended for service housing or supported housing of a person with mobility and functional impairment shall, irrespective of the number of storeys in the building, have a turning  space  with  a  diameter  of  at  least  1,500  millimetres  in  the  hallway  and  kitchen.",{'ID': '29_Finnish_Accessibility'},"A dwelling that is intended for service housing or supported housing of a person with mobility and functional impairment shall, irrespective of the number of storeys in the building, have a turning space with a diameter of at least <e1>1,500 millimetres</e1> in the <e2>hallway</e2> and kitchen.",none,annotated
+81314489-dcd9-410f-9b15-595b87e7c8f9,"The resilient layer should be timber sheathing at least 9mm thick, expanded metal or a similar resilient material.",{'ID': '14_UK_DocQ_Security_Dwellings'},"The <e1>resilient layer</e1> should be <e2>timber sheathing</e2> at least 9mm thick, expanded metal or a similar resilient material.",necessity,annotated
+a8b3e54e-902c-4502-99a2-8c41d46f1416_9,,,"If there are more than <e1>500kW</e1> <e2>pressure tests</e2> in a space, they must be linked to one another in at least four groups, unless the chairs are placed around tables.",greater,synthetic
+1913381b-a2cc-496e-9168-82ccf2a01d50,"In connection with repair and alteration work, the heat emitters connected to the domestic hot water ring duct may be replaced so that the heat emission capacity of the heat emitters to be installed does not exceed 200 Watts per room.",{'ID': '67_Finnish_Health-WaterAndSewerage'},"In connection with repair and alteration work, the <e1>heat emitters</e1> connected to the domestic hot water ring duct may be <e2>replaced</e2> so that the heat emission capacity of the heat emitters to be installed does not exceed 200 Watts per room.",selection,annotated
+75c60084-6878-472d-8694-e8739e0dd76c_10,,,The width of access routes in assembly areas with a <e1>heat gain</e1> of <e2>300mm</e2> must be at least 900 millimetres.,equal,synthetic
+3ca5cb38-b90b-4449-ba14-4268866df8e1_3,,,The water heater is close to the draw-off points and has a <e1>equivalent area</e1> no greater than <e2>One</e2>.,less-equal,synthetic
+19478a13-7457-4dd3-a394-744f826db7b0_0,,,"The handle to at least <e1>two years</e1> <e2>Rigid connectors</e2> in the principal living area is 700-1000mm above floor level, unless fitted with a remote opening device that is within this height range.",greater-equal,synthetic
+8cef7dc5-2d76-4dd8-80c5-6861b11a8f6f,"Where the work concerns a building containing more than one dwelling, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",{'ID': '3_UK_DocR_V1_InfrastructureForElectircalCommunications'},"Where the work concerns a <e1>building</e1> containing more than one <e2>dwelling</e2>, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",part-of,annotated
+9b329413-b6d6-4953-9b34-c82d3a2e9c44,"Before a new heating appliance is installed, all central heating and primary hot water circuits should be thoroughly cleaned and flushed out.",{'ID': '216_UK_DocM_V2_AccessAndUseOfBuildings'},"Before a new heating appliance is installed, all <e1>central heating</e1> and primary hot water circuits should be <e2>thoroughly cleaned and flushed out</e2>.",necessity,annotated
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. <e1>laundry room</e1>; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. <e2>special facilities</e2> cleansed by water rinsing.",none,annotated
+339fc78c-a2f2-481c-a410-3aeb41e24b8a,Solid walls constructed of coursed brickwork or blockwork should be at least as thick as 1/16 of the storey height.,{'ID': '32_UK_DocA_Structure'},Solid walls constructed of coursed brickwork or blockwork should be at least as <e1>thick</e1> as 1/16 of the storey <e2>height</e2>.,none,annotated
+0ea1e862-2434-4fc8-97a2-b076c992ef20_0,,,"The <e1>thresholds</e1> of an exit must be at least <e2>16/01/2023 00:00</e2> and its free height must be at least 2,100 millimetres.",greater-equal,synthetic
+b5addb77-be99-45a2-8dc0-fdf5d1969a57,Each column and wall shall be supplied with continuous vertical ties from the foundations to the roof level.,{'ID': '194_Finnish_StabilityOfStructures'},Each column and wall shall be supplied with <e1>continuous</e1> vertical ties <e2>from the foundations to the roof level</e2>.,none,annotated
+bb309bf3-9e86-43d9-8b6e-ebff176d1c88,The sink is not more than 150mm deep with insulation to the underside to prevent scalding of a wheelchair users legs.,{'ID': '96_UK_DocM_V1_AccessAndUseOfBuildings'},The sink is not more than 150mm deep with <e1>insulation to the underside</e1> <e2>to prevent scalding of a wheelchair users legs</e2>.,selection,annotated
+33ed3038-99a6-4b2d-906a-a1db21f2d898,"For heating systems in new dwellings, or when a heat generator such as a boiler is replaced in an existing dwelling, each room should be provided with thermostatic room controls.",{'ID': '250_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For heating systems in new dwellings, or when a <e1>heat generator</e1> such as a boiler is <e2>replaced</e2> in an existing dwelling, each room should be provided with thermostatic room controls.",selection,annotated
+0096a3bf-ac16-4a75-adf9-8c3f4a9b8610,The smaller dimension of each panel which can be either the width or height of the panel should be 230mm or less.,{'ID': '33_UK_DocQ_Security_Dwellings'},The smaller <e1>dimension</e1> of each <e2>panel</e2> which can be either the width or height of the panel should be 230mm or less.,part-of,annotated
+f5a71c7b-e852-40f2-8f88-91cda7902a7e_1,,,"If a new building has a space heating or airconditioning system with an <e1>primary energy factor</e1> greater than <e2>two years</e2>, a building automation and control system should be installed.",greater,synthetic
+10e66a84-25db-40a0-87d5-6297d0732fe4,The shutoff valves shall be located: 1) at each house; 2) at each apartment; 3) in vertical service pipes; 4) on both sides of devices installed in the service pipes; 5) before a device or fixture that is connected to the connector pipe;  6) on both sides of the water meters.,{'ID': '93_Finnish_Health-WaterAndSewerage'},The shutoff valves shall be located: 1) at each house; 2) at each apartment; 3) in vertical service pipes; 4) on both sides of devices installed in the service pipes; 5) before a device or <e1>fixture</e1> that is connected to the connector pipe; 6) on <e2>both sides</e2> of the water meters.,none,annotated
+0ea1e862-2434-4fc8-97a2-b076c992ef20_1,,,"The width of an exit must be at least 1,200 millimetres and its free <e1>shallow projecting</e1> must be at least <e2>five</e2>.",greater-equal,synthetic
+793cb939-b3d9-46eb-ae65-71a4d5c8031b_9,,,Where the <e1>community heating primary circuit</e1> is within the private curtilage of the dwelling (but not within a carport or <e2>retaining rail</e2>) at least one space is a standard parking bay that can be widened to 3.3m.,not-part-of,synthetic
+77be05f2-cd8c-4d35-85e4-6637b999d8e7,The value of the consequential improvement works should not be less than 10 of the value of the principal works.,{'ID': '452_UK_DocM_V2_AccessAndUseOfBuildings'},The value of the consequential improvement works should not be less than 10 of the <e1>value</e1> of the <e2>principal works</e2>.,part-of,annotated
+103f99ad-884b-4bae-9f22-ccb1c5bc3d26_3,,,"In an open garage of no more than <e1>3</e1> <e2>appliance</e2>, the maximum area may be used as the surface area of the storeys, even though the driveways between the various storeys are combined.",less-equal,synthetic
+2cfc6994-0cbe-4bdf-9ed5-af8d40c79d8c,The load shall be stated on this sign in kg/m2.,{'ID': '22_Finnish_StabilityOfStructures'},The <e1>load</e1> shall be <e2>stated on this sign in kg/m2</e2>.,necessity,annotated
+33ed3038-99a6-4b2d-906a-a1db21f2d898,"For heating systems in new dwellings, or when a heat generator such as a boiler is replaced in an existing dwelling, each room should be provided with thermostatic room controls.",{'ID': '250_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For heating systems in new dwellings, or when a heat generator such as a <e1>boiler</e1> is replaced in an <e2>existing</e2> dwelling, each room should be provided with thermostatic room controls.",none,annotated
+17fba530-c42b-4eeb-85dd-16da0bacc49c,"Areas that are not enclosed, such as open floors, covered ways and balconies, should be excluded.",{'ID': '470_UK_DocL_V1_ConsrvationOfFuelAndPower'},"<e1>Areas</e1> that are not enclosed, such as open floors, covered ways and balconies, should be <e2>excluded</e2>.",necessity,annotated
+f2e57c55-e340-4fa2-87c5-03f4bf8e5942,"Where the dwelling is defined as wheelchair adaptable, it should be easy to install a lift.",{'ID': '82_UK_DocM_V1_AccessAndUseOfBuildings'},"Where the <e1>dwelling</e1> is defined as <e2>wheelchair adaptable</e2>, it should be easy to install a lift.",selection,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_6,,,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and <e1>8.5m2</e1> in <e2>difference in light reflectance value</e2>; however, the sum of these must be at least 1,500 millimetres.",greater-equal,synthetic
+5ca184fa-e100-4f97-957d-e37ae944786f_4,,,The <e1>ventilation</e1> of installing electric vehicle charge points and cable routes is not more than <e2>25 decibels</e2> of the total capital cost of the major renovation.,less-equal,synthetic
+56b0e4bf-81d7-4ab9-855b-780ef2f0b1d3_4,,,Storage premises with a <e1>quality of the installation</e1> exceeding <e2>2.4 metres</e2> are not permitted within the building.,greater,synthetic
+0262f6e5-21bc-4312-9388-8ac93b79416d_10,,,The minimum full <e1>vicinity</e1> of the absorption chillers should be no worse than <e2>1100mm</e2>.,greater-equal,synthetic
+d3fc8c9b-c23a-4188-8723-369caa90453c,"The reference value for a building's total combined window area is 15 of the sum total of the floor  plate areas  of  the  buildings  storeys that  are  fully  or in  part  above  the  ground  but, however, at most 50 of the building's facade area.",{'ID': '124_Finnish_EnergyEfficiency'},"The reference value for a building's total combined window area is 15 of the sum total of the floor plate areas of the buildings storeys that are fully or in part above the ground but, however, at most 50 of the <e1>building's</e1> <e2>facade area</e2>.",part-of,annotated
+c3cfbf29-a95f-4453-a7de-a8f6e4ca2ea8,"If sand, sludge, grease, petrol, oil or other detrimental physical or chemical substances may end up in the sewerage system or network or in the environment, the sewerage system shall be equipped with a separator or treatment device.",{'ID': '152_Finnish_Health-WaterAndSewerage'},"If sand, <e1>sludge</e1>, grease, petrol, oil or other detrimental physical or chemical substances may <e2>end up in the sewerage system or network or in the environment</e2>, the sewerage system shall be equipped with a separator or treatment device.",selection,annotated
+b02f9b87-d934-4c2f-8a59-b3b8c0a7be17,"Instantaneous or snapshot CO2 readings can be misleading, so several measurements should be taken throughout the day.",{'ID': '124_UK_DocF_V2_Ventilation'},"Instantaneous or <e1>snapshot</e1> <e2>CO2 readings</e2> can be misleading, so several measurements should be taken throughout the day.",selection,annotated
+7d877df3-9aa7-4dff-a64d-5356a66c944d_6,,,"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a <e1>side</e1> exceeding <e2>100</e2> and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",greater,synthetic
+07565483-7508-43fc-b15e-82d95881e81e,"The average dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate should be calculated using the same averaging methodology.",{'ID': '70_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The average dwelling primary energy rate, <e1>dwelling emission rate</e1> and dwelling fabric energy efficiency rate should be <e2>calculated using the same averaging methodology</e2>.",necessity,annotated
+11710051-ee66-4fe2-83f9-85ea53aa5b03,"The ventilation system shall produce an adequate outdoor air flow to the building and extract from indoor air substances that are harmful to health, excessive humidity, odours with adverse effects on comfort and indoor air impurities arising from humans, construction products and activities.",{'ID': '46_Finnish_Health-IndoorClimateAndVentilation'},"The <e1>ventilation system</e1> shall produce an adequate outdoor air flow to the building and <e2>extract from indoor air substances that are harmful to health, excessive humidity, odours with adverse effects on comfort and indoor air impurities arising from humans, construction products and activities</e2>.",necessity,annotated
+f0c72b35-5a0a-4554-8713-96f6f73a67f1,A cube with edges of no more than 50 millimetres may pass between the lower edge of a barriers protective part and the landing or the upper surface or edge of a step.,{'ID': '51_Finnish_SafetyOfUse'},A cube with <e1>edges</e1> of no more than <e2>50 millimetres</e2> may pass between the lower edge of a barriers protective part and the landing or the upper surface or edge of a step.,less-equal,annotated
+12907c6f-e734-436d-a7de-c8a1626fbe92,"Both:the area of rooflights exceeds 20 of the area of the roof, and the design solar load exceeds 25W/m2.",{'ID': '496_UK_DocM_V2_AccessAndUseOfBuildings'},"Both:the area of rooflights exceeds <e1>20</e1> of the <e2>area</e2> of the roof, and the design solar load exceeds 25W/m2.",selection,annotated
+9fee4426-8d7f-40f9-bc6f-562a5d3fd9b4,"For roofs insulated at ceiling level, the long-term protection of the insulation layer should be considered: boarded areas should be provided above the insulation to give access for maintenance.",{'ID': '144_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For roofs <e1>insulated at ceiling level</e1>, the long-term protection of the insulation layer should be considered: <e2>boarded</e2> areas should be provided above the insulation to give access for maintenance.",none,annotated
+fb1da22f-8ddb-4399-b441-64dca68da9af,"If a lift or other device for moving between levels is installed in the exit of an existing building, the dwellings exit may be no less than 850 millimetres wide.",{'ID': '218_Finnish_FireSafety'},"If a <e1>lift</e1> or other device for moving between levels is installed in the <e2>exit</e2> of an existing building, the dwellings exit may be no less than 850 millimetres wide.",part-of,annotated
+710ef992-e187-4b1a-894b-e0e222f54359,"NOTE: For grid-supplied electricity, a CO2 emission factor of 0.136kgCO2/kWh and primary energy factor of 1.501kWhPE/kWh should be used.",{'ID': '199_UK_DocM_V2_AccessAndUseOfBuildings'},"NOTE: For <e1>grid-supplied</e1> <e2>electricity</e2>, a CO2 emission factor of 0.136kgCO2/kWh and primary energy factor of 1.501kWhPE/kWh should be used.",selection,annotated
+c952db0f-b605-4335-8d56-97fc339ad5ba_1,,,All <e1>20 litres per second</e1> <e2>organic substances</e2> of the installation and commissioning checklist should be completed.,equal,synthetic
+3c28dbd6-8a3d-4ede-ae08-89e4b5d69d60_6,,,The approach route is a minimum of 900mm wide with a maximum <e1>long</e1> of <e2>1.501kWhPE/kWh</e2>.,less-equal,synthetic
+bf798097-bb99-42d0-a73f-8cebab8fbeb8_8,,,"In the entrance halls and other indoor areas of administrative, service and business premises and in assembly areas, the <e1>frequency</e1> of the steps must be no more than <e2>0.7W/(m2K)</e2> and the tread must be no less than 300 millimetres.",less-equal,synthetic
+46f5be2a-1514-420b-bc39-331fc6e0d2df_3,,,"The <e1>heat exchanger area</e1>, dwelling emission rate and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the <e2>output</e2>, target emission rate and target fabric energy efficiency rate, respectively.",less-equal,synthetic
+72e7ed0c-9e73-46b2-a919-20f3fea337fd,"An area with a potentially flammable or explosive atmosphere must not be located in a building where there are dwellings, accommodation premises, institutions or assembly and business premises.",{'ID': '56_Finnish_FireSafety'},"An area with a potentially flammable or explosive atmosphere must not be located in a <e1>building</e1> where there are dwellings, accommodation premises, institutions or assembly and business <e2>premises</e2>.",part-of,annotated
+a94b6b4f-a05e-403e-bbca-ebe1b94e38a1,"The area of sloping surfaces such as staircases, galleries, raked auditoria and tiered terraces should be taken as their area on plan.",{'ID': '470_UK_DocM_V2_AccessAndUseOfBuildings'},"The area of <e1>sloping surfaces</e1> such as <e2>staircases</e2>, galleries, raked auditoria and tiered terraces should be taken as their area on plan.",selection,annotated
+7f49ccb1-ce2c-47eb-8b22-2c8e806e5d88_1,,,The resilient layer should be to the full height of the door and <e1>One</e1> <e2>design temperature difference</e2> of the doorset.,equal,synthetic
+7c74b365-6fdd-494d-9675-3ae036c55348,Ladders and other structural elements at emergency exits and service routes must be designed and constructed so that they can also be used in an emergency situation.,{'ID': '82_Finnish_SafetyOfUse'},Ladders and other <e1>structural elements</e1> at emergency exits and service routes must be <e2>designed and constructed</e2> so that they can also be used in an emergency situation.,necessity,annotated
+20518e80-6f7e-457f-8c5a-59fa4c0eb324,"When calculating the heat loss for a buildings design solution, the design value shall be used as the value of the air leakage rate figure for the building envelope.",{'ID': '137_Finnish_EnergyEfficiency'},"When calculating the heat loss for a <e1>buildings</e1> <e2>design solution</e2>, the design value shall be used as the value of the air leakage rate figure for the building envelope.",part-of,annotated
+45338082-ca66-418b-8fe1-8f2be926f330_5,,,A <e1>network distribution point</e1> of no more than <e2>1 in 40</e2> may pass between the stair steps.,less-equal,synthetic
+10b2bf58-18df-46ee-a766-ed11eec6f42b,"Humus soil, organic substances decomposing or rotting from moisture or building waste must not be left under new buildings, in their crawl spaces and in their gravel backfills functioning as a drainage layer.",{'ID': '45_Finnish_Health-Humidity'},"<e1>Humus soil</e1>, organic substances decomposing or rotting from moisture or building waste must <e2>not be left under new buildings, in their crawl spaces and in their gravel backfills functioning as a drainage layer</e2>.",necessity,annotated
+c2c49207-78b3-42b0-8b61-ad506f5a80e2,"In hard water areas, suitable measures should be taken to treat the feed water to water heaters and the hot water circuit of combination boilers to reduce lime-scale accumulation.",{'ID': '381_UK_DocL_V1_ConsrvationOfFuelAndPower'},"In <e1>hard water areas</e1>, suitable <e2>measures</e2> should be taken to treat the feed water to water heaters and the hot water circuit of combination boilers to reduce lime-scale accumulation.",necessity,annotated
+0085ecdd-f2f0-45f5-948d-ded697c69866,"In addition, on one side of the toilet seat there shall be a free space of at least 800 millimetres.",{'ID': '44_Finnish_Accessibility'},"In addition, on one <e1>side</e1> of the <e2>toilet seat</e2> there shall be a free space of at least 800 millimetres.",part-of,annotated
+72d7716f-7e3e-442c-9e42-14d4b19e18e3_4,,,"A <e1>Fixings</e1> that is being connected to a new building should not have a <e2>combined dead,imposed and wind loads</e2> for delivered heat to the building which is greater than 0.350kgCO2/kWh.",not-part-of,synthetic
+31e6f85a-97ea-4224-9144-bc3d1daad96d,Consideration should be given to providing a low level urinal for children in male washrooms.,{'ID': '174_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Consideration</e1> should be given to providing a <e2>low level</e2> urinal for children in male washrooms.,none,annotated
+0aaf71f0-a482-4a72-a407-0d6db79c7f6f_8,,,"In a building consisting primarily of one storey, no more than 200 m2 of fire-compartmented and no more than <e1>one metre</e1> of non-fire-compartmented <e2>water meters</e2> that essentially relate to the business of the building may be located on the level of second storey.",less-equal,synthetic
+baee716c-b8c2-4500-b4de-63fa11f007b1_0,,,A minimum of one in <e1>1.3 seconds</e1> of the remaining <e2>WC pans</e2> must have access to cable routes.,equal,synthetic
+c3cfbf29-a95f-4453-a7de-a8f6e4ca2ea8,"If sand, sludge, grease, petrol, oil or other detrimental physical or chemical substances may end up in the sewerage system or network or in the environment, the sewerage system shall be equipped with a separator or treatment device.",{'ID': '152_Finnish_Health-WaterAndSewerage'},"If sand, sludge, grease, <e1>petrol</e1>, oil or other detrimental physical or chemical substances may <e2>end up in the sewerage system or network or in the environment</e2>, the sewerage system shall be equipped with a separator or treatment device.",selection,annotated
+eeb4239f-3819-475c-ad20-756bed80c4ff_2,,,"In reference heat loss calculations, the value used as the <e1>service</e1> of the buildings ventilation system shall be <e2>150mm</e2>.",equal,synthetic
+113b8bf8-1856-45f5-a54b-d65ef100b437,"If a gas-fired combination boiler is installed in an existing dwelling, at least one of the following energy efficiency measures, appropriate to the system, should be installed.",{'ID': '262_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If a gas-fired <e1>combination boiler</e1> is installed in an existing dwelling, at least one of the following <e2>energy efficiency measures</e2>, appropriate to the system, should be installed.",necessity,annotated
+208b093d-361f-4aec-819d-4abca4e72c68,"in an evacuation area where the maximum number of occupants is 60, the second exit may be no less than 900 millimetres in width.",{'ID': '216_Finnish_FireSafety'},"in an evacuation area where the <e1>maximum number of occupants</e1> is <e2>60</e2>, the second exit may be no less than 900 millimetres in width.",equal,annotated
+ee0c8c7c-c65e-4403-92e6-628fd680f3bf,Any panel within the doorset should be at least 15mm thick.,{'ID': '30_UK_DocQ_Security_Dwellings'},Any panel within the <e1>doorset</e1> should be at least 15mm <e2>thick</e2>.,none,annotated
+1913381b-a2cc-496e-9168-82ccf2a01d50_4,,,"In connection with repair and alteration work, the heat emitters connected to the domestic hot water ring duct may be replaced so that the <e1>internal temperature</e1> of the heat emitters to be installed does not exceed <e2>0.15m/s</e2>.",less-equal,synthetic
+009e12eb-db83-485c-9ffc-e1f462251109_0,,,Each air terminal should have a <e1>living quarters</e1> of at least <e2>70 kN</e2> of the free area of its associated duct.,greater-equal,synthetic
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c_1,,,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be <e1>target fabric energy efficiency rate</e1> <e2>adequate means</e2>.",equal,synthetic
+e874f337-2067-4e77-ad32-c3b857f40e7a_6,,,"If the <e1>domestic  hot  water cylinder heat loss</e1> exceeds <e2>8.5m2</e2>, the total minimum width of the exits shall be calculated by increasing the original 1,200 millimetres by 400 millimetres for each additional group of 60 people.",greater,synthetic
+d0b6759e-deec-451d-bd7a-ec65b96048be_9,,,"extract air of <e1>indoor units</e1> <e2>60 persons</e2> shall be conducted through individual ducts, or common ducts serving spaces of the same type as regards level of air purity, to the outdoors, into a collection duct installed above the spaces it serves or into an extract air chamber.",equal,synthetic
+3ca5cb38-b90b-4449-ba14-4268866df8e1_8,,,The water heater is close to the draw-off points and has a <e1>opening</e1> no greater than <e2>850 millimetres</e2>.,less-equal,synthetic
+63af9f99-6939-4e8c-a6a9-8b10942e1597,"The handle to at least one window in the principal living area is located between 450mm and 1200mm above floor level, unless the window is fitted with a remote opening device that is within this height range.",{'ID': '57_UK_DocM_V1_AccessAndUseOfBuildings'},"The <e1>handle</e1> to at least one window in the <e2>principal living area</e2> is located between 450mm and 1200mm above floor level, unless the window is fitted with a remote opening device that is within this height range.",none,annotated
+47e50ddf-6174-436d-851b-7ddf46c10ccf,A suitable chemical inhibitor should be added to the primary heating circuit to protect against scale and corrosion.,{'ID': '380_UK_DocL_V1_ConsrvationOfFuelAndPower'},A suitable chemical inhibitor should be added to the <e1>primary</e1> <e2>heating circuit</e2> to protect against scale and corrosion.,selection,annotated
+f06f7ec1-3b83-4e1a-a421-b09589f2374c,"Provision shall be made to prevent any door or gate: (a) which slides or opens upwards, from falling onto any person; and (b) which is powered, from trapping any person.",{'ID': '114_UK_DocK_ProtectionFromFalling'},"Provision shall be made to prevent any <e1>door or gate</e1>: (a) which slides or opens upwards, from falling onto any person; and (b) <e2>which is powered</e2>, from trapping any person.",selection,annotated
+fb5d3054-4911-4049-ba09-1c3e80f9c07c,"The tread of steps in uncovered or unheated outdoor staircases must be no less than 390 millimetres, and the riser may be no more than 130 millimetres.",{'ID': '29_Finnish_SafetyOfUse'},"The tread of <e1>steps</e1> in uncovered or unheated outdoor staircases must be no less than <e2>390 millimetres</e2>, and the riser may be no more than 130 millimetres.",none,annotated
+9ff8b8fd-5361-4c3d-9a7e-7459276c8df7_8,,,The <e1>total supply air flow</e1> must not exceed the individual dwellings <e2>cost</e2>.,less-equal,synthetic
+7e34700e-92de-4b00-a820-f4085a2e186c_1,,,"If the <e1>domestic hot water circulation heat loss</e1> between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than <e2>20 degrees Celsius</e2>, the wall in question must be class EI 15.",less,synthetic
+77be05f2-cd8c-4d35-85e4-6637b999d8e7_9,,,The <e1>slope</e1> of the consequential improvement works should not be less than <e2>01:20:00</e2> of the value of the principal works.,greater-equal,synthetic
+02f5e3fb-7a8b-4a88-a6e5-337cc0835284,"When a new residential building is erected, information about the building must be given to the owner of the building to allow them to use the overheating mitigation strategy effectively.",{'ID': '90_UK_DocO_Overheating'},"When a new residential building is erected, <e1>information</e1> about the building must be <e2>given to the owner of the building to allow them to use the overheating mitigation strategy effectively</e2>.",necessity,annotated
+981a0996-c526-4ee7-b679-0f17bd5ecd29,"Where it is not feasible to install a space heating system that can operate at this temperature (e.g. where there is insufficient space for larger radiators, or the existing distribution system is provided with higher temperature heat from a low carbon district heat network), the space heating system should be designed to the lowest design temperature possible that will still meet the heating needs of the building.",{'ID': '209_UK_DocM_V2_AccessAndUseOfBuildings'},"Where it is not feasible to install a space heating system that can operate at this temperature (e.g. where there is insufficient space for larger radiators, or the existing distribution system is provided with higher temperature heat from a low carbon district heat network), the <e1>space heating system</e1> should be <e2>designed to the lowest design temperature possible that will still meet the heating needs of the building</e2>.",none,annotated
+4fc3b5b1-a838-4429-b385-d8e80e6633eb,"In the absence of relevant harmonised European Standards, products with a travel exceeding 3m must have a product certificate issued by a Notified Body.",{'ID': '117_UK_DocM_V2_AccessAndUseOfBuildings'},"In the absence of relevant harmonised European Standards, <e1>products</e1> with a <e2>travel</e2> exceeding 3m must have a product certificate issued by a Notified Body.",part-of,annotated
+33ed3038-99a6-4b2d-906a-a1db21f2d898,"For heating systems in new dwellings, or when a heat generator such as a boiler is replaced in an existing dwelling, each room should be provided with thermostatic room controls.",{'ID': '250_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For heating systems in new dwellings, or when a heat generator such as a <e1>boiler</e1> is replaced in an existing <e2>dwelling</e2>, each room should be provided with thermostatic room controls.",none,annotated
+319372c4-2f9b-4594-8150-b9fd2c7670c4,A stack vent located in cold premises shall be thermally insulated.,{'ID': '136_Finnish_Health-WaterAndSewerage'},A <e1>stack vent</e1> located in cold premises shall be <e2>thermally insulated</e2>.,necessity,annotated
+2f8d4247-e53b-49ae-bd26-c4f1765eaee8_8,,,"Extract air of <e1>termination points</e1> 2, 3 and <e2>160 millimetres</e2> shall not be used as recirculation air.",equal,synthetic
+4d80c4d1-08ee-481a-9f9c-e9151ce1094d,"The area of windows, roof windows, rooflights and doors should not exceed 25 of the total floor area of the dwelling.",{'ID': '421_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The area of windows, <e1>roof windows</e1>, rooflights and doors should not exceed <e2>25</e2> of the total floor area of the dwelling.",none,annotated
+e21fa967-934e-4a29-a66d-252fdbbf928f_7,,,"If the parasitic energy use is unknown, an <e1>rate of heat release</e1> of <e2>twice the rise plus the going (2R G)</e2> should be made for any control system.",equal,synthetic
+b4cef2a7-038c-4f72-8ea6-20e43d766165,"The building primary energy rate and building emission rate submission should be accompanied by a report, signed by a suitably qualified person, detailing how the CO2 emission factors and primary energy factors have been derived.",{'ID': '70_UK_DocM_V2_AccessAndUseOfBuildings'},"The building primary energy rate and building emission rate <e1>submission</e1> should be accompanied by a <e2>report</e2>, signed by a suitably qualified person, detailing how the CO2 emission factors and primary energy factors have been derived.",necessity,annotated
+3c28dbd6-8a3d-4ede-ae08-89e4b5d69d60_2,,,The approach route is a minimum of 900mm wide with a maximum <e1>Extract</e1> of <e2>five</e2>.,less-equal,synthetic
+a1f91cfd-21f8-49a4-8468-746f49f4848e,"For a building that contains more than one dwelling for example a block of flats or a terrace of houses an average target primary energy rate, target emission rate and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",{'ID': '50_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For a <e1>building</e1> that contains more than one dwelling for example a block of flats or a terrace of houses an average target primary energy rate, target emission rate and <e2>target fabric energy efficiency rate</e2> may be calculated as an alternative to individual target rates for each dwelling.",part-of,annotated
+5869233a-4fc0-48bf-9007-2b0c9a169fef,"A building shall, if its size, number of storeys or an intended purpose of a premises within the building so requires, be divided into fire compartments in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",{'ID': '100_Finnish_FireSafety'},"A building shall, if its size, number of storeys or an intended purpose of a premises within the building so requires, be <e1>divided into fire compartments</e1> in order to restrict the spread of fire and smoke, to provide safe evacuation and to <e2>facilitate rescue and extinguishing measures</e2>.",selection,annotated
+12f51746-1632-4628-9d8a-98dcf58ed9fc,Doors must be capable of opening outwards - in wheelchair adaptable bathrooms the door may open inwards providing that the door can be easily rehung to open outwards (e.g. door stops are planted and easily moved).,{'ID': '116_UK_DocM_V1_AccessAndUseOfBuildings'},Doors must be capable of opening outwards - in wheelchair adaptable bathrooms the <e1>door</e1> may <e2>open inwards providing that the door can be easily rehung to open outwards</e2> (e.g. door stops are planted and easily moved).,necessity,annotated
+aa41a5d4-c0b1-4da7-84a0-5c2e2738654f,The total number of ventilators installed in the dwellings habitable rooms and kitchens should be at least the following: Five ventilators if the dwelling has more than one bedroom.,{'ID': '89_UK_DocF_V1_Ventilation'},The total number of ventilators installed in the dwellings habitable rooms and kitchens should be at least the following: Five ventilators if the dwelling has more than <e1>one</e1> <e2>bedroom</e2>.,greater,annotated
+aa921550-3c5f-470b-b578-1788f83b49a7,Uplighters mounted at low or floor level can disorientate some visually impaired people and should be avoided.,{'ID': '153_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Uplighters</e1> mounted at low or floor level can <e2>disorientate some visually impaired people</e2> and should be avoided.,selection,annotated
+23cff3c3-1251-4c5f-9fd9-8f52d25eb494_6,,,Gasfired boilers and multi-stage oilfired boilers with an <e1>level with entry</e1> of more than <e2>450mm</e2> should have fully modulating burner controls.,greater,synthetic
+5b1fe636-d2aa-4382-885e-a4f8a2cae4d4_0,,,"Generally, a thermal element once upgraded should not have a <e1>axle group load</e1> greater than <e2>20 litres per second</e2>.",less-equal,synthetic
+825053cb-af5d-43a9-b59b-e2a5ae78ea73_0,,,The <e1>efficiency</e1> of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the number of dwellings in the residential building; b. the <e2>class</e2> of associated parking spaces.,greater,synthetic
+8fcdc238-3c30-4659-9303-1b126a39b2cd,The design solar load should be reduced by at least 20%.,{'ID': '499_UK_DocM_V2_AccessAndUseOfBuildings'},The <e1>design solar load</e1> should be <e2>reduced</e2> by at least 20%.,necessity,annotated
+2de867fe-80e7-4617-ad18-36225dd45ab1_10,,,Hinged or pivot windows with an <e1>number of appliances</e1> of less than <e2>0.15 dm3/s per m2</e2> are not suitable for purge ventilation.,less,synthetic
+c0a6d35c-cc20-428b-941d-c3e3e6365c74_7,,,"In a tier that is uninterrupted by cross-gangways, and where the pitch exceeds 25, use a <e1>include specifications for key materials</e1> number of steps of <e2>190 kN</e2>.",equal,synthetic
+2cc3d5b0-d3b4-45f2-a00d-838fd3f9abbb_3,,,"There should be a <e1>steps</e1>, in the absence of tobacco smoke or other excessive pollutants, of <e2>25 decibels</e2>.",equal,synthetic
+a477ee34-044e-443b-a95f-fbb1da913c38,"Changing places toilets, facilities designed for individuals with complex and multiple impairments who may require the assistance of up to two assistants, should be provided in addition to any wheelchair-accessible accommodation in separate-sex toilet washrooms, wheelchair-accessible unisex toileting facilities and baby changing facilities.",{'ID': '160_UK_DocM_V2_AccessAndUseOfBuildings'},"Changing places toilets, facilities designed for individuals with complex and multiple impairments who may require the assistance of up to two assistants, should be provided in addition to any wheelchair-accessible accommodation in separate-sex toilet washrooms, wheelchair-accessible <e1>unisex</e1> <e2>toileting facilities</e2> and baby changing facilities.",selection,annotated
+208b093d-361f-4aec-819d-4abca4e72c68,"in an evacuation area where the maximum number of occupants is 60, the second exit may be no less than 900 millimetres in width.",{'ID': '216_Finnish_FireSafety'},"in an evacuation area where the <e1>maximum number of occupants</e1> is 60, the <e2>second</e2> exit may be no less than 900 millimetres in width.",none,annotated
+f41fb8da-16bd-4404-accb-e32727f3736a,"Windows, glass walls and glass doors into which there is a danger of collision must be marked in such a way that they can be easily noticed.",{'ID': '69_Finnish_SafetyOfUse'},"Windows, glass walls and glass <e1>doors</e1> into which there is a <e2>danger of collision</e2> must be marked in such a way that they can be easily noticed.",selection,annotated
+2de867fe-80e7-4617-ad18-36225dd45ab1_3,,,Hinged or pivot windows with an <e1>Moisture</e1> of less than <e2>8.5m2</e2> are not suitable for purge ventilation.,less,synthetic
+e43c1e88-be80-42d9-944e-1bf0f0f82479_6,,,Individual flights are: for <e1>locations</e1> up to <e2>9 metres</e2> not more than 10m long; for gradients up to 1:12 not more than 5m long.,less-equal,synthetic
+4abb3268-3ba6-47e8-a8b7-4676dbaa9a16,"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide all means of escape routes with a minimum clear headroom of 2m, except in doorways.",{'ID': '28_UK_DocK_ProtectionFromFalling'},"For <e1>buildings</e1> <e2>other than dwellings</e2> and for common access areas in buildings that contain flats, Provide all means of escape routes with a minimum clear headroom of 2m, except in doorways.",selection,annotated
+ddf21ce1-bd2a-49f5-8ba6-d2bcb5edf575,Taps should be lever operated and capable of easy operation.,{'ID': '97_UK_DocM_V1_AccessAndUseOfBuildings'},<e1>Taps</e1> should be lever operated and <e2>capable of easy operation</e2>.,necessity,annotated
+36650de0-ef3c-4fd1-8199-f47c0e576076_7,,,the <e1>installation</e1> of the platform does not exceed <e2>190 kN</e2>.,less-equal,synthetic
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_3,,,"The free opening of the vertical hatch or window of an emergency exit must be at least <e1>400 millimetres</e1> in <e2>air distribution</e2> and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",greater-equal,synthetic
+fdd9e41e-20a5-4f5b-9dae-91653467c3ec,Multiple cooling units should be provided with controls that ensure that the combined plant operates in its most efficient modes.,{'ID': '275_UK_DocM_V2_AccessAndUseOfBuildings'},Multiple <e1>cooling units</e1> should be <e2>provided with controls that ensure that the combined plant operates in its most efficient modes</e2>.,necessity,annotated
+1de9d3e5-dee3-42c9-b929-80b7936f1642,The lift shall provide access to the entrance level and each level with entry to a dwelling or a space serving the use of the building.,{'ID': '33_Finnish_Accessibility'},The lift shall <e1>provide access</e1> to the entrance level and each <e2>level with entry</e2> to a dwelling or a space serving the use of the building.,selection,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",{'ID': '85_Finnish_Health-IndoorClimateAndVentilation'},"<e1>Extract air</e1> from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for <e2>extract air categories</e2> 1 and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",part-of,annotated
+8cef7dc5-2d76-4dd8-80c5-6861b11a8f6f_4,,,"Where the work concerns a building containing more than <e1>three</e1> <e2>cords</e2>, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",greater,synthetic
+05fdde92-d8af-42ad-963b-9019c69a8ab3_7,,,"For a timber frame where the intermediate floor structure breaches the external wall insulation, further insulation of the same <e1>air extract rate</e1> as the <e2>extension</e2> used in the external wall should be included within the depth of the intermediate floor structure.",equal,synthetic
+54907849-c48f-4267-b5f0-fc7e9279da7c,"For existing dwellings, when carrying out work on an existing system, such as installing or replacing components (e.g. replacing a boiler but retaining the pipework and heat emitters), the energy performance of the new components should be assessed.",{'ID': '409_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For existing dwellings, when carrying out work on an existing system, such as installing or replacing components (e.g. replacing a boiler but retaining the pipework and heat emitters), the <e1>energy performance</e1> of the new components should be <e2>assessed</e2>.",necessity,annotated
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",{'ID': '75_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) <e1>cable routes</e1> for electric vehicle charge points must be <e2>installed in a minimum of one fifth of the total number of parking spaces</e2>, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",necessity,annotated
+ec419055-6ed3-4dac-9879-748e2d365a26,"Internal building services: where services penetrate the air barrier, holes should be as small as possible and should be core drilled to limit damage.",{'ID': '180_UK_DocL_V1_ConsrvationOfFuelAndPower'},"<e1>Internal</e1> <e2>building services</e2>: where services penetrate the air barrier, holes should be as small as possible and should be core drilled to limit damage.",selection,annotated
+99a53f17-48cb-4012-a47b-700761e0983b_1,,,Where a new building which is not a residential building or a mixed-use building has more than 10 parking spaces (a) <e1>0.06 m2</e1> of those <e2>fan units</e2> must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,equal,synthetic
+18797f16-0b56-41e9-a4e6-d4150db4165d,A new building must be built to a minimum standard of total energy performance.,{'ID': '47_UK_DocM_V2_AccessAndUseOfBuildings'},A <e1>new</e1> <e2>building</e2> must be built to a minimum standard of total energy performance.,selection,annotated
+66b3628a-f0ee-4bc7-93c8-2ae0145a2e78,"In a room with no openable window, an intermittent extract fan should be provided with controls which continue to operate the fan for at least 15 minutes after the room is vacated.",{'ID': '83_UK_DocF_V1_Ventilation'},"In a room with no <e1>openable</e1> <e2>window</e2>, an intermittent extract fan should be provided with controls which continue to operate the fan for at least 15 minutes after the room is vacated.",selection,annotated
+38020928-c137-486e-88d7-c8feec038c99,A building must be provided with a fire wall if it is situated adjacent to a neighbouring building or so close to a neighbouring building that the spread of fire is evident.,{'ID': '189_Finnish_FireSafety'},A building must be provided with a <e1>fire wall</e1> if it is situated adjacent to a neighbouring building or <e2>so close to a neighbouring building that the spread of fire is evident</e2>.,none,annotated
+b5addb77-be99-45a2-8dc0-fdf5d1969a57,Each column and wall shall be supplied with continuous vertical ties from the foundations to the roof level.,{'ID': '194_Finnish_StabilityOfStructures'},Each column and wall shall be supplied with continuous vertical <e1>ties</e1> <e2>from the foundations to the roof level</e2>.,selection,annotated
+7134933d-17df-4a8c-b72e-1c09177bad1c,The spread of fire in voids of wall-type building elements must be restricted at least by storey.,{'ID': '130_Finnish_FireSafety'},The <e1>spread of fire</e1> in <e2>voids</e2> of wall-type building elements must be restricted at least by storey.,part-of,annotated
+12e545d1-64f4-45c9-a520-5b8a003eba0a,"If the dwelling has more than one exposed facade, the area of background ventilators on each facade should be similar, to allow cross-ventilation.",{'ID': '85_UK_DocF_V1_Ventilation'},"If the <e1>dwelling</e1> has more than one exposed <e2>facade</e2>, the area of background ventilators on each facade should be similar, to allow cross-ventilation.",part-of,annotated
+ef4ec541-e1a7-47d4-9a83-94715d8900ba,"Where one or more parking spaces are within a covered car park, the requirement to install electric vehicle charge points should be met by installing charge points in parking spaces that are not within a covered car park.",{'ID': '89_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where one or more parking spaces are within a covered car park, the <e1>requirement</e1> <e2>to install electric vehicle charge points</e2> should be met by installing charge points in parking spaces that are not within a covered car park.",selection,annotated
+588857f5-9281-4c32-8d83-c98230d5b934,The use of boards with lapped or tongue and groove edges should be considered.,{'ID': '146_UK_DocL_V1_ConsrvationOfFuelAndPower'},The use of <e1>boards</e1> with lapped or tongue and groove edges should be <e2>considered</e2>.,necessity,annotated
+a235c68f-ae44-4770-b005-4e9d7b659eb7,All cavity walls should have leaves at least 90mm thick and cavities at least 50mm wide.,{'ID': '35_UK_DocA_Structure'},All cavity walls should have leaves at least <e1>90mm</e1> <e2>thick</e2> and cavities at least 50mm wide.,greater-equal,annotated
+02648917-f651-4c45-9449-1623cafd6cdc,Public Health Englands Indoor Air Quality Guidelines for Selected Volatile Organic Compounds (VOCs) in the UK should be used.,{'ID': '118_UK_DocF_V2_Ventilation'},<e1>Public Health Englands Indoor Air Quality Guidelines</e1> for Selected Volatile Organic Compounds (VOCs) in the UK should be <e2>used</e2>.,necessity,annotated
+a1f91cfd-21f8-49a4-8468-746f49f4848e_11,,,"For a building that contains more than <e1>2.4 metres</e1> <e2>acoustic environment</e2> for example a block of flats or a terrace of houses an average target primary energy rate, target emission rate and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",greater,synthetic
+29c431ee-ea93-491d-ab13-06418d93c488_1,,,"If <e1>air extract rate</e1> is greater than <e2>30</e2>, manual control is acceptable.",greater,synthetic
+2633c957-07b4-4caa-a9d6-5acbac16b0b0_3,,,NOTE: Linear interpolation should be used to determine efficiencies between manufacturers declared efficiencies at 30 and <e1>two</e1> <e2>design value</e2>.,equal,synthetic
+bf798097-bb99-42d0-a73f-8cebab8fbeb8,"In the entrance halls and other indoor areas of administrative, service and business premises and in assembly areas, the riser of the steps must be no more than 160 millimetres and the tread must be no less than 300 millimetres.",{'ID': '21_Finnish_SafetyOfUse'},"In the <e1>entrance halls</e1> and other indoor areas of administrative, service and business premises and in assembly areas, the riser of the <e2>steps</e2> must be no more than 160 millimetres and the tread must be no less than 300 millimetres.",part-of,annotated
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab_10,,,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the <e1>rise</e1> of that installation exceeds <e2>25 decibels</e2> of the total cost of the major renovation.",greater,synthetic
+2f815a08-db3c-48a6-b248-d69aeac870ee_5,,,"the vertical <e1>efficiencies</e1> is: a. not more than <e2>180kW</e2>, where there is no liftway enclosure and no floor penetration; b. more than 2m, where there is a liftway enclosure.",less-equal,synthetic
+956efc87-87de-4d3c-99fb-dc58eab9353b_5,,,A dwelling that is intended for sheltered housing or supported housing of a person with mobility or functional impairment shall have at least one toilet and washing facility which has a free space with a <e1>fire resistance time requirement</e1> of at least <e2>10 litres per second per person</e2>.,greater-equal,synthetic
+f4557f58-1986-4de0-b0b8-539906b7fbcb,"For rooflights, U-values should be calculated based on a horizontal position.",{'ID': '130_UK_DocM_V2_AccessAndUseOfBuildings'},"For <e1>rooflights</e1>, <e2>U-values</e2> should be calculated based on a horizontal position.",part-of,annotated
+a1f91cfd-21f8-49a4-8468-746f49f4848e_3,,,"For a building that contains more than <e1>0.15m/s</e1> <e2>Manual controls</e2> for example a block of flats or a terrace of houses an average target primary energy rate, target emission rate and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",greater,synthetic
+f2bf62e6-9577-48b5-b15d-9fe4904acf52,"Where controls are integrated in the heater, the system should be provided with a time switch/programmer and room temperature sensor linked to heater firing and fan speed control.",{'ID': '268_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where controls are integrated in the heater, the system should be provided with a time switch/programmer and <e1>room temperature sensor</e1> <e2>linked to heater firing and fan speed control</e2>.",selection,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_10,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the <e1>supports</e1> from these spaces does not exceed <e2>1m3/s</e2> of the total air flow in the vertical duct.",less-equal,synthetic
+42f29765-356f-4d9c-9a73-bc99e7044e07,"People with mobility impairments who arrive as passengers should be able to alight from a vehicle close to the principal entrance, or alternative accessible entrance, of the building in a way that is convenient for entry into the building.",{'ID': '47_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>People</e1> <e2>with mobility impairments</e2> who arrive as passengers should be able to alight from a vehicle close to the principal entrance, or alternative accessible entrance, of the building in a way that is convenient for entry into the building.",selection,annotated
+d3654276-d6c6-4f32-af90-2d1040cb536c,Mechanical ventilation with heat recovery systems should be designed to avoid the moist air from the wet rooms recirculating to the habitable rooms.,{'ID': '107_UK_DocF_V1_Ventilation'},Mechanical <e1>ventilation</e1> with <e2>heat recovery systems</e2> should be designed to avoid the moist air from the wet rooms recirculating to the habitable rooms.,part-of,annotated
+f72a98f3-b7d2-4633-b244-0d7242dfb0c9_4,,,Every single bedroom has a minimum <e1>air flow resistance</e1> of <e2>20mm</e2> and is at least 2.4m wide.,greater-equal,synthetic
+7323113d-fcd0-4e19-a24a-c6171ec8c2b7,District heat networks and community heating systems should be designed to accommodate heat meter(s) for each dwelling.,{'ID': '295_UK_DocL_V1_ConsrvationOfFuelAndPower'},District heat networks and <e1>community heating systems</e1> should be <e2>designed to accommodate heat meter(s) for each dwelling</e2>.,necessity,annotated
+bfdf95da-d422-47cd-83d7-a30a4969f2e6_6,,,"If the internal ties must be centred on the supporting line, the minimum value of the <e1>CO2 emission factor</e1>, <e2>one</e2>, will also be applied to internal ties.",greater-equal,synthetic
+b4cef2a7-038c-4f72-8ea6-20e43d766165,"The building primary energy rate and building emission rate submission should be accompanied by a report, signed by a suitably qualified person, detailing how the CO2 emission factors and primary energy factors have been derived.",{'ID': '70_UK_DocM_V2_AccessAndUseOfBuildings'},"The building primary energy rate and building emission rate <e1>submission</e1> should be accompanied by a report, <e2>signed by a suitably qualified person</e2>, detailing how the CO2 emission factors and primary energy factors have been derived.",none,annotated
+5b1fe636-d2aa-4382-885e-a4f8a2cae4d4_5,,,"Generally, a thermal element once upgraded should not have a <e1>design</e1> greater than <e2>55 degrees Celsius</e2>.",less-equal,synthetic
+8805ec9f-3f5f-44fc-9078-3ae62439c973,"NOTE: When a single U-value is calculated for a product range of doors, the configuration of the door chosen for the calculation should be the worst performing in the product range.",{'ID': '108_UK_DocL_V1_ConsrvationOfFuelAndPower'},"NOTE: When a single U-value is calculated for a product range of doors, the <e1>configuration</e1> of the <e2>door</e2> chosen for the calculation should be the worst performing in the product range.",part-of,annotated
+eccc60e7-3d76-46c0-a9d9-e398bf3e475a,The part of the dwelling above ground level should be considered separately.,{'ID': '71_UK_DocF_V1_Ventilation'},The <e1>part</e1> of the dwelling <e2>above ground level</e2> should be considered separately.,selection,annotated
+7e78bb20-5337-45b1-ad14-de356d35a020,Ventilation ductwork should be made and assembled so as to be reasonably airtight.,{'ID': '299_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Ventilation ductwork</e1> should be <e2>made and assembled so as to be reasonably airtight</e2>.,necessity,annotated
+4470dde4-6422-4c13-9781-de68c3e075dc_10,,,"The outdoor <e1>total cost</e1> of a dwelling unit, however, shall be designed to be a minimum of <e2>E</e2>.",greater-equal,synthetic
+43e26628-8b62-4cc6-91e2-284335df1564_9,,,"In rooms used for sleeping or rest, the <e1>fire performance</e1> may not exceed <e2>2.5 ties/m2</e2>.",less-equal,synthetic
+5e226793-2805-41b0-bcb6-49319afaefc7,"If the building has a floor area greater than 150m2, heating should be split into different heating zones and each zone should have separate controls for timing and temperature demand.",{'ID': '258_UK_DocM_V2_AccessAndUseOfBuildings'},"If the building has a floor area greater than <e1>150m2</e1>, heating should be <e2>split into different heating zones and each zone should have separate controls for timing and temperature demand</e2>.",none,annotated
+c952db0f-b605-4335-8d56-97fc339ad5ba_5,,,All <e1>1100mm</e1> <e2>construction</e2> of the installation and commissioning checklist should be completed.,equal,synthetic
+7f696221-52c9-4c52-8f90-74bd93c51299_2,,,This grippable handrail is 850-1000mm above the pitch line of the flight and <e1>standards</e1> at least <e2>230mm</e2> beyond the top and bottom nosings.,greater-equal,synthetic
+e3b85ad6-6132-40d7-86f8-3cc5d44eb12c,One bedroom should be close to an accessible bathroom suitable for a wheelchair user.,{'ID': '100_UK_DocM_V1_AccessAndUseOfBuildings'},<e1>One</e1> <e2>bedroom</e2> should be close to an accessible bathroom suitable for a wheelchair user.,equal,annotated
+bde1697a-20c9-4f15-a63c-5be323a058c1,Any connection of two or more air handling units to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,{'ID': '90_Finnish_Health-IndoorClimateAndVentilation'},Any connection of two or more <e1>air handling units</e1> to the same <e2>duct</e2> or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,part-of,annotated
+29c431ee-ea93-491d-ab13-06418d93c488,"If luminous efficacy is greater than 75 light source lumens per circuit-watt, manual control is acceptable.",{'ID': '338_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If luminous efficacy is greater than <e1>75 light source lumens per circuit-watt</e1>, manual <e2>control</e2> is acceptable.",none,annotated
+56b0e4bf-81d7-4ab9-855b-780ef2f0b1d3_11,,,Storage premises with a <e1>headroom</e1> exceeding <e2>6m</e2> are not permitted within the building.,greater,synthetic
+5ca184fa-e100-4f97-957d-e37ae944786f,The cost of installing electric vehicle charge points and cable routes is not more than 7% of the total capital cost of the major renovation.,{'ID': '51_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},The cost of installing electric vehicle charge points and cable routes is not more than 7% of the total capital cost of the <e1>major</e1> <e2>renovation</e2>.,selection,annotated
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. <e1>special facilities</e1> <e2>cleansed by water rinsing</e2>.",selection,annotated
+06c2e0f7-69c8-47ec-bf31-9902ae9df7cf,"Provision shall be made for any windows, skylights, or any transparent or translucent walls, ceilings or roofs to be safely accessible for cleaning.",{'ID': '109_UK_DocK_ProtectionFromFalling'},"Provision shall be <e1>made</e1> for any windows, skylights, or any transparent or translucent walls, ceilings or roofs to <e2>be safely accessible for cleaning</e2>.",selection,annotated
+e32bbb47-c826-40c1-8ea4-8c32353d3fd2_2,,,There shall be <e1>16/01/2023 00:00</e1> of <e2>waste water pumping station</e2> provided for people in the building.,equal,synthetic
+3ca5cb38-b90b-4449-ba14-4268866df8e1_10,,,The water heater is close to the draw-off points and has a <e1>water vapour resistance</e1> no greater than <e2>8.5m2</e2>.,less-equal,synthetic
+40b40b1b-d1b1-49d8-b9b7-13c5845a169d_2,,,The structure of the control appliance of the plumbing fixture shall be such that its <e1>air distribution</e1> does not arise above <e2>five</e2>.,less-equal,synthetic
+f19c920a-bd5a-49ac-a111-69fb944271b4,The net heating energy demand for ventilation shall be calculated on the basis of the heating of air after heat recovery to supply air temperature and any heating before heat recovery.,{'ID': '86_Finnish_EnergyEfficiency'},The <e1>net heating energy demand</e1> for <e2>ventilation</e2> shall be calculated on the basis of the heating of air after heat recovery to supply air temperature and any heating before heat recovery.,part-of,annotated
+cf35d4a4-3170-421b-9be1-b68d928eed1d,"A roof with a pitch greater than 1:8 must be constructed making appropriate use of walkways, roof ladders, safety ladders, roof stairs, roof treads and foot rails.",{'ID': '125_Finnish_SafetyOfUse'},"A <e1>roof</e1> with a <e2>pitch</e2> greater than 1:8 must be constructed making appropriate use of walkways, roof ladders, safety ladders, roof stairs, roof treads and foot rails.",part-of,annotated
+a2f3a871-91d5-4777-95c9-4744792b3a69,"in an existing building, for the principal or main staff entrance or entrances to be accessible, an alternative accessible entrance should be provided.",{'ID': '61_UK_DocM_V2_AccessAndUseOfBuildings'},"in an existing building, for the principal or main staff entrance or entrances to be accessible, an <e1>alternative</e1> accessible <e2>entrance</e2> should be provided.",selection,annotated
+5ca184fa-e100-4f97-957d-e37ae944786f_7,,,The <e1>dwelling primary energy rate</e1> of installing electric vehicle charge points and cable routes is not more than <e2>850 millimetres</e2> of the total capital cost of the major renovation.,less-equal,synthetic
+13a437c0-918c-47f2-85bd-b80dd69eb027,"There are no limits on the design of display windows and similar glazing, but for new buildings their impact must be taken into account in the calculation of primary energy and CO2 emissions.",{'ID': '138_UK_DocM_V2_AccessAndUseOfBuildings'},"There are no limits on the design of display windows and similar glazing, but for new buildings <e1>their</e1> <e2>impact</e2> must be taken into account in the calculation of primary energy and CO2 emissions.",part-of,annotated
+72e7ed0c-9e73-46b2-a919-20f3fea337fd_0,,,"An <e1>rails</e1> with a potentially flammable or explosive atmosphere must not be located in a <e2>motor</e2> where there are dwellings, accommodation premises, institutions or assembly and business premises.",not-part-of,synthetic
+c7035b48-7244-40a9-a70e-1d244caf72ac,"The same approved calculation tool must be used to calculate the target primary energy rate, target emission rate and target fabric energy efficiency rate and the dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate.",{'ID': '56_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The same <e1>approved</e1> calculation tool must be used to calculate the <e2>target primary energy rate</e2>, target emission rate and target fabric energy efficiency rate and the dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate.",none,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",{'ID': '85_Finnish_Health-IndoorClimateAndVentilation'},"<e1>Extract air</e1> from toilets, <e2>washrooms</e2> and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",part-of,annotated
+3724fd47-22f7-432c-81a2-1abcb95c7df2_9,,,"The total number of ventilators installed in a dwellings habitable rooms and kitchens should be no fewer than five, except in <e1>eight per cent</e1> <e2>hot water circuit</e2> properties, where there should be no fewer than four.",equal,synthetic
+511c1a7f-08b9-48ec-aea6-9b749fdf31a1_5,,,"A non-residential building shall, considering the intended use and functional units of the building and distances in the building, have an <e1>EI 30</e1> of appropriately located <e2>hot water storage vessel</e2> which are suitable for users of wheelchairs and walking frames with wheels.",equal,synthetic
+208b093d-361f-4aec-819d-4abca4e72c68_1,,,"in an evacuation area where the <e1>total thickness</e1> is <e2>24 metres</e2>, the second exit may be no less than 900 millimetres in width.",equal,synthetic
+66b3628a-f0ee-4bc7-93c8-2ae0145a2e78_5,,,"In a <e1>that part</e1> with no openable <e2>drawings</e2>, an intermittent extract fan should be provided with controls which continue to operate the fan for at least 15 minutes after the room is vacated.",not-part-of,synthetic
+51284e52-f2f4-41b5-85e2-3fa96ab8602a,"All users of facilities should be able to locate suitable seating and move safely and easily to and from the seating area and ancillary accommodation, such as lavatories, dining rooms and bedroom suites.",{'ID': '132_UK_DocM_V2_AccessAndUseOfBuildings'},"All <e1>users</e1> of <e2>facilities</e2> should be able to locate suitable seating and move safely and easily to and from the seating area and ancillary accommodation, such as lavatories, dining rooms and bedroom suites.",part-of,annotated
+a86b58e8-046f-44b7-8e1b-00c876c8c647_6,,,"Parapets in <e1>air flow resistance</e1> A to <e2>proportion</e2> and panel parts of walls acting as parapets, as well as their fasteners, shall be designed to the concentrated load Qk = 0.3 kN acting on a random spot.",less-equal,synthetic
+0cafda73-ee3a-4a99-a224-2d142de63618,"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",{'ID': '238_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a wet heating system is either: a. <e1>newly installed</e1> b. <e2>fully replaced</e2> in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",none,annotated
+86350df0-a40e-412b-a301-004524d56736,"For wet heating systems in new dwellings with a floor area of 150m2 or greater, a minimum of two independently controlled heating circuits should be provided.",{'ID': '246_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For wet heating systems in <e1>new</e1> <e2>dwellings</e2> with a floor area of 150m2 or greater, a minimum of two independently controlled heating circuits should be provided.",selection,annotated
+e43c1e88-be80-42d9-944e-1bf0f0f82479_0,,,Individual flights are: for gradients up to 1:15 not more than 10m long; for <e1>load EER</e1> up to <e2>390 millimetres</e2> not more than 5m long.,less-equal,synthetic
+5e51b653-449e-4d00-be19-0e20ecff5c49_8,,,The default <e1>habitable area</e1> should be <e2>0.3W/m2</e2>.,equal,synthetic
+8719164e-370a-42f2-9240-0a1b8db1a2c7,Extensive voids must be partitioned in order to restrict the spread of fire.,{'ID': '129_Finnish_FireSafety'},<e1>Extensive</e1> <e2>voids</e2> must be partitioned in order to restrict the spread of fire.,selection,annotated
+4abb3268-3ba6-47e8-a8b7-4676dbaa9a16_9,,,"For buildings other than dwellings and for common access areas in buildings that contain flats, Provide all means of escape routes with a minimum clear <e1>rise between landings</e1> of <e2>100 millimetres</e2>, except in doorways.",equal,synthetic
+6c789809-b1b8-429a-8fe2-8ce16f8a4b54_5,,,Air flows in the continuous working area of a parking garage for motor vehicles shall be designed so that the <e1>going</e1> does not exceed <e2>230mm</e2>.,less-equal,synthetic
+c0a6d35c-cc20-428b-941d-c3e3e6365c74,"In a tier that is uninterrupted by cross-gangways, and where the pitch exceeds 25, use a maximum number of steps of 40.",{'ID': '25_UK_DocK_ProtectionFromFalling'},"In a tier that is uninterrupted by cross-gangways, and where the <e1>pitch</e1> exceeds <e2>25</e2>, use a maximum number of steps of 40.",greater,annotated
+a1f91cfd-21f8-49a4-8468-746f49f4848e_7,,,"For a building that contains more than <e1>two years</e1> <e2>kitchens</e2> for example a block of flats or a terrace of houses an average target primary energy rate, target emission rate and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",greater,synthetic
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9,"In buildings more than 9 metres and at most 28 metres in height, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",{'ID': '126_Finnish_SafetyOfUse'},"In <e1>buildings</e1> more than 9 metres and at most 28 metres in <e2>height</e2>, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",part-of,annotated
+7e34700e-92de-4b00-a820-f4085a2e186c_10,,,"If the free gap between facing walls of adjacent glazed balconies or the <e1>energy efficiency</e1> of the wall to the window of an adjacent fire compartment is less than <e2>55</e2>, the wall in question must be class EI 15.",less,synthetic
+755b768a-b9d0-4175-8b69-398c399aeac7,It should be possible for information about the building to be easily obtained from a reception point or gathered from notice boards and signs.,{'ID': '86_UK_DocM_V2_AccessAndUseOfBuildings'},It should be possible for <e1>information</e1> about the building to be <e2>easily obtained from a reception point or gathered from notice boards and signs</e2>.,necessity,annotated
+d342429e-d3fc-46e0-a195-527cfef1fd4b_10,,,"When an existing building with a total useful <e1>shallow projecting</e1> of over <e2>1,000 millimetres</e2> is being extended or the habitable area is being increased, consequential improvements should be installed.",greater,synthetic
+50e89a86-e2be-439d-b230-79274cd7199b,Modular and portable buildings with a planned service life of more than two years at a single location should be shown to comply with the energy efficiency requirements.,{'ID': '81_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Modular</e1> and portable <e2>buildings</e2> with a planned service life of more than two years at a single location should be shown to comply with the energy efficiency requirements.,selection,annotated
+c72a5952-2e0b-4d4a-9185-09e4149b6239,The flooring functioning as waterproofing or waterproofing located underneath the flooring in wet rooms must have a watertight connection with the waterproofing of the wall.,{'ID': '114_Finnish_Health-Humidity'},The flooring functioning as waterproofing or waterproofing <e1>located underneath the flooring in wet rooms</e1> must have a <e2>watertight connection</e2> with the waterproofing of the wall.,none,annotated
+d925c189-860a-4fcb-ae88-d1cf8cc14fb8_6,,,"The <e1>thresholds</e1> of steps in covered or heated outdoor staircases must be no less than <e2>E</e2>, and the riser may be no more than 160 millimetres.",greater-equal,synthetic
+9ff8b8fd-5361-4c3d-9a7e-7459276c8df7_7,,,The <e1>energy savings</e1> must not exceed the individual dwellings <e2>energy performance</e2>.,less-equal,synthetic
+cc72106e-9e7f-47cf-8a95-0173a8305dad,"In a new building, the crawl space height must be 0.8 metres on average at the minimum.",{'ID': '83_Finnish_Health-Humidity'},"In a new <e1>building</e1>, the crawl space <e2>height</e2> must be 0.8 metres on average at the minimum.",none,annotated
+37f01a2c-b944-45a2-a7f4-140d8c03d7ac_7,,,"After rebating, frame components should retain at least <e1>50</e1> of <e2>heat sources</e2>.",greater-equal,synthetic
+19478a13-7457-4dd3-a394-744f826db7b0,"The handle to at least one window in the principal living area is 700-1000mm above floor level, unless fitted with a remote opening device that is within this height range.",{'ID': '127_UK_DocM_V1_AccessAndUseOfBuildings'},"The handle to at least <e1>one</e1> <e2>window</e2> in the principal living area is 700-1000mm above floor level, unless fitted with a remote opening device that is within this height range.",greater-equal,annotated
+c2e0629d-350b-45b8-9e9e-d58be1780f12_2,,,"If the <e1>playgrounds</e1> has no <e2>Beading</e2>, it should be treated as having one bedroom when calculating the ventilation required for the purposes of meeting the ventilation standards.",not-part-of,synthetic
+3153d771-404e-4a54-ac05-ed1b75e37506_6,,,"Gangways should not be less than 1100mm <e1>total supply air flow</e1> unless used by not more than 50 persons, in which case gangways should be a minimum of <e2>90</e2>.",greater-equal,synthetic
+419892bb-5044-4c63-a8ba-7747ad52c23d,"When installing windows, roof windows, rooflights or doors (all of which are controlled fittings), the controlled fitting should be well fitted and reasonably draught-proof.",{'ID': '195_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When installing windows, roof windows, rooflights or doors (all of which are controlled fittings), the <e1>controlled fitting</e1> should be well fitted and <e2>reasonably draught-proof</e2>.",necessity,annotated
+082c7ed9-3579-48c2-a0d2-076f1edd647c_0,,,"Each of the <e1>0.7 metres</e1> <e2>service</e2> of the centrally hinged window should be assessed as a single side, bottom or top hung window.",equal,synthetic
+33d3a432-5793-4102-ba93-da485c334abd,The termination points of cable duct should be sited where access to maintain in future is unrestricted.,{'ID': '113_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},The <e1>termination points</e1> of <e2>cable duct</e2> should be sited where access to maintain in future is unrestricted.,part-of,annotated
+103f99ad-884b-4bae-9f22-ccb1c5bc3d26_0,,,"In an open garage of no more than <e1>20 degrees Celsius</e1> <e2>lighting</e2>, the maximum area may be used as the surface area of the storeys, even though the driveways between the various storeys are combined.",less-equal,synthetic
+0085ecdd-f2f0-45f5-948d-ded697c69866,"In addition, on one side of the toilet seat there shall be a free space of at least 800 millimetres.",{'ID': '55_Finnish_Accessibility'},"In addition, on one <e1>side</e1> of the toilet seat there shall be a <e2>free space</e2> of at least 800 millimetres.",necessity,annotated
+079db365-cfed-474e-9329-25349ac0db4a_8,,,"In connection with the door of an outside space of an individual dwelling the <e1>edges</e1> outside the door may be more than <e2>6m</e2> if the level difference can, with reasonable effort, be eliminated with equipment in the outdoor space.",greater,synthetic
+451e7c91-d39f-4401-a0e3-5ab455ab0442,"The approach route should be level, gently sloping, or, where necessary, ramped.",{'ID': '15_UK_DocM_V1_AccessAndUseOfBuildings'},"The <e1>approach route</e1> should be <e2>level</e2>, gently sloping, or, where necessary, ramped.",necessity,annotated
+f0c72b35-5a0a-4554-8713-96f6f73a67f1_3,,,A cube with <e1>indoor and outdoor conditions</e1> of no more than <e2>0.1m2</e2> may pass between the lower edge of a barriers protective part and the landing or the upper surface or edge of a step.,less-equal,synthetic
+bde1697a-20c9-4f15-a63c-5be323a058c1,Any connection of two or more air handling units to the same duct or chamber shall be designed so that the pressures of the rooms or the directions of air flow between the rooms and in the ductworks do not change when the air flows of the units are being controlled.,{'ID': '90_Finnish_Health-IndoorClimateAndVentilation'},Any connection of two or more air handling units to the same duct or <e1>chamber</e1> shall be designed so that the pressures of the rooms or the directions of air flow <e2>between the rooms and in the ductworks</e2> do not change when the air flows of the units are being controlled.,none,annotated
+ef4f54b6-1099-4404-9fa2-d0c0d5e55543_6,,,The <e1>Extract</e1> must not exceed the individual dwellings <e2>anthracite figure</e2>.,less-equal,synthetic
+e4fb8d18-8dbc-4351-a2df-d87f880f476a_11,,,The <e1>limits</e1> for balconies is <e2>13l/s</e2> that of the load-bearing structures of the storey.,equal,synthetic
+2ff58135-b89d-40d1-a145-51aad9e5a942_9,,,"The landing in front of the outside door shall be at least <e1>21 C</e1> <e2>proportion</e2> and at least 1,500 millimetres long.",greater-equal,synthetic
+f9de28ac-45bb-4400-9d9f-8afee73bd2e3_2,,,The <e1>rise</e1> should not exceed <e2>0.7W/(m2K)</e2> of dwelling floor area.,less-equal,synthetic
+043258d7-d35e-42d9-87c5-b83565c39ad6,"Before elements are concealed by subsequent work, an onsite audit should be undertaken to confirm that the designed details have been constructed.",{'ID': '133_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Before <e1>elements</e1> are <e2>concealed by subsequent work</e2>, an onsite audit should be undertaken to confirm that the designed details have been constructed.",selection,annotated
+88e23b46-22d9-4be6-87b7-40541f7995a9,"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the distance of the uppermost floor level from the entry level exceeds 24 metres; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",{'ID': '254_Finnish_FireSafety'},"A building shall be provided with a permanently installed <e1>dry riser</e1> that is <e2>suitable for its purpose for transporting water for fire extinguishing</e2>: 1) in the premises above the entry level of the building, when the distance of the uppermost floor level from the entry level exceeds 24 metres; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",selection,annotated
+793cb939-b3d9-46eb-ae65-71a4d5c8031b_0,,,Where the <e1>window unit</e1> is within the private curtilage of the dwelling (but not within a carport or <e2>joints</e2>) at least one space is a standard parking bay that can be widened to 3.3m.,not-part-of,synthetic
+baee716c-b8c2-4500-b4de-63fa11f007b1_10,,,A minimum of one in <e1>two </e1> of the remaining <e2>Door furniture</e2> must have access to cable routes.,equal,synthetic
+b2b81097-97a3-41c2-922c-ffec3e2dd8c0,Turning circle should be clear of top step of any adjacent flight of steps.,{'ID': '87_UK_DocM_V1_AccessAndUseOfBuildings'},<e1>Turning circle</e1> should be <e2>clear of top step of any adjacent flight of steps</e2>.,necessity,annotated
+45338082-ca66-418b-8fe1-8f2be926f330_0,,,A <e1>parking garage</e1> of no more than <e2>25mm</e2> may pass between the stair steps.,less-equal,synthetic
+8edf6848-bdc2-4970-8328-5a24d69a2f0d,"Unit length should be measured through midline of the worktop, not the front or rear edge.",{'ID': '94_UK_DocM_V1_AccessAndUseOfBuildings'},"<e1>Unit length</e1> should be <e2>measured through midline of the worktop, not the front or rear edge</e2>.",necessity,annotated
+73a6e4e0-c157-4cae-bc28-c0788f6a1e53,"Activation (e.g. motion sensors and push buttons), safety features and the time-lapse allowed for entry and exit through powered door systems should be carefully considered to suit the needs of people who cannot react quickly.",{'ID': '73_UK_DocM_V2_AccessAndUseOfBuildings'},"Activation (e.g. motion sensors and push buttons), safety features and the <e1>time-lapse</e1> allowed for entry and <e2>exit</e2> through powered door systems should be carefully considered to suit the needs of people who cannot react quickly.",part-of,annotated
+6a41a473-bd3c-4e38-a093-094b3fdae388_10,,,At least one in every <e1>01:08:00</e1> remaining <e2>malfunction detector</e2> must be provided with cable routes.,equal,synthetic
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_1,,,"If the air flows of extract air categories 1 and 2 are combined into the same duct and <e1>travel distance</e1> <e2>500 millimetres</e2> air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+38cd3221-7fc9-4462-be20-78b16a4309d3_10,,,The <e1>class</e1> of openings in the newly created dwelling should not be more than <e2>25W/m2</e2> of the total floor area.,less-equal,synthetic
+d43e4877-601c-43eb-9d33-96945754374b,Good acoustic design should be employed to achieve an acoustic environment that is neither too reverberant nor too absorbent so that announcements and conversations can be heard clearly.,{'ID': '99_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Good</e1> <e2>acoustic design</e2> should be employed to achieve an acoustic environment that is neither too reverberant nor too absorbent so that announcements and conversations can be heard clearly.,selection,annotated
+c0a6d35c-cc20-428b-941d-c3e3e6365c74,"In a tier that is uninterrupted by cross-gangways, and where the pitch exceeds 25, use a maximum number of steps of 40.",{'ID': '25_UK_DocK_ProtectionFromFalling'},"In a <e1>tier</e1> that is uninterrupted by cross-gangways, and where the <e2>pitch</e2> exceeds 25, use a maximum number of steps of 40.",part-of,annotated
+e9d02df9-2fcb-4acc-bd08-18a4348cd823,"If people need to obtain tickets for pay and display parking, the ticket dispensing machines should be located in a way that allows a person in a wheelchair, or a person of short stature, to gain access close to the machine and reach the payment and ticket dispensing functions.",{'ID': '46_UK_DocM_V2_AccessAndUseOfBuildings'},"If people need to obtain tickets for pay and display parking, the <e1>ticket dispensing machines</e1> should be <e2>located</e2> in a way that allows a person in a wheelchair, or a person of short stature, to gain access close to the machine and reach the payment and ticket dispensing functions.",necessity,annotated
+079db365-cfed-474e-9329-25349ac0db4a_10,,,"In connection with the door of an outside space of an individual dwelling the <e1>from the inside face of the wall</e1> outside the door may be more than <e2>three seconds</e2> if the level difference can, with reasonable effort, be eliminated with equipment in the outdoor space.",greater,synthetic
+aa41a5d4-c0b1-4da7-84a0-5c2e2738654f_10,,,The total number of ventilators installed in the dwellings habitable rooms and kitchens should be at least the following: Five ventilators if the dwelling has more than <e1>2m</e1> <e2>barrier</e2>.,greater,synthetic
+afd03eb1-8356-4755-a764-6869d0ac4171,"Reasonable provision should be made for people to (a) gain access to; and (b) use, the dwelling and its facilities.",{'ID': '9_UK_DocM_V1_AccessAndUseOfBuildings'},"Reasonable <e1>provision</e1> should be made for people to (a) <e2>gain access to; and (b) use, the dwelling and its facilities</e2>.",none,annotated
+0cafda73-ee3a-4a99-a224-2d142de63618,"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",{'ID': '238_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including <e1>pipework</e1> and emitters should be sized to <e2>allow the space heating system to operate effectively</e2> and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",none,annotated
+c06bb553-d8f1-47f5-ab33-cfdebb6bca52,"When a building undergoes a major renovation, the technical, environmental and economic feasibility of installing high-efficiency alternative systems should be considered.",{'ID': '117_UK_DocM_V2_AccessAndUseOfBuildings'},"When a building undergoes a major renovation, the <e1>technical</e1>, environmental and economic <e2>feasibility of installing high-efficiency alternative systems</e2> should be considered.",selection,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab,"The free opening of the vertical hatch or window of an emergency exit must be at least 600 millimetres in height and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",{'ID': '83_Finnish_SafetyOfUse'},"The free opening of the vertical <e1>hatch</e1> or window of an <e2>emergency exit</e2> must be at least 600 millimetres in height and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",part-of,annotated
+793cb939-b3d9-46eb-ae65-71a4d5c8031b_3,,,Where the <e1>free space</e1> is within the private curtilage of the dwelling (but not within a carport or <e2>hard water areas</e2>) at least one space is a standard parking bay that can be widened to 3.3m.,not-part-of,synthetic
+cea6e7bd-c494-4146-9f81-3fd2ed64a2a6,The slope of the floor surface in the seating area and access route may not exceed 8 per cent (1:12.5).,{'ID': '119_Finnish_SafetyOfUse'},The <e1>slope</e1> of the floor surface in the seating area and access route may not exceed <e2>8 per cent (1:12.5)</e2>.,less-equal,annotated
+e32bbb47-c826-40c1-8ea4-8c32353d3fd2,There shall be adequate means of ventilation provided for people in the building.,{'ID': '15_UK_DocF_V1_Ventilation'},There shall be <e1>adequate means</e1> of <e2>ventilation</e2> provided for people in the building.,equal,annotated
+72e7ed0c-9e73-46b2-a919-20f3fea337fd,"An area with a potentially flammable or explosive atmosphere must not be located in a building where there are dwellings, accommodation premises, institutions or assembly and business premises.",{'ID': '56_Finnish_FireSafety'},"An <e1>area</e1> with a potentially flammable or explosive <e2>atmosphere</e2> must not be located in a building where there are dwellings, accommodation premises, institutions or assembly and business premises.",part-of,annotated
+e21fa967-934e-4a29-a66d-252fdbbf928f_4,,,"If the parasitic energy use is unknown, an <e1>constraints</e1> of <e2>70 kN</e2> should be made for any control system.",equal,synthetic
+46f5be2a-1514-420b-bc39-331fc6e0d2df,"The dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the target primary energy rate, target emission rate and target fabric energy efficiency rate, respectively.",{'ID': '356_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The dwelling primary energy rate, <e1>dwelling emission rate</e1> and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the target primary energy rate, <e2>target emission rate</e2> and target fabric energy efficiency rate, respectively.",less-equal,annotated
+dcc583b1-8c4c-42cf-a1ed-e8907de56254_7,,,"The rise of the indoor steps of other spaces intended for everyday use may be no more than 180 millimetres, and the <e1>relationship</e1> must be no less than <e2>190 kN</e2>.",greater-equal,synthetic
+09b2a395-5293-4b7d-82d4-5312482d59e9_8,,,"Door entry controls, where provided, are mounted 900-1000mm above finished ground level, and at least <e1>900mm</e1> <e2>building emission rate</e2> from any projecting corner.",greater-equal,synthetic
+082c7ed9-3579-48c2-a0d2-076f1edd647c_11,,,"Each of the <e1>0.7</e1> <e2>SEER</e2> of the centrally hinged window should be assessed as a single side, bottom or top hung window.",equal,synthetic
+3724fd47-22f7-432c-81a2-1abcb95c7df2_0,,,"The total number of ventilators installed in a dwellings habitable rooms and kitchens should be no fewer than five, except in <e1>500kW</e1> <e2>insulating material</e2> properties, where there should be no fewer than four.",equal,synthetic
+561480d1-56e5-41be-a56d-f2f2222bcb17,"Any damage, such as tears, should be repaired before boarding.",{'ID': '185_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Any <e1>damage</e1>, such as <e2>tears</e2>, should be repaired before boarding.",selection,annotated
+c5c5365f-273f-4c29-8491-4f50aabc3b78,"Manual controls for powered entrance doors should be clearly distinguishable against the background and not located so that a person, having used the control, needs to move to avoid contact with the door as it opens.",{'ID': '74_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Manual controls</e1> for powered <e2>entrance doors</e2> should be clearly distinguishable against the background and not located so that a person, having used the control, needs to move to avoid contact with the door as it opens.",part-of,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_7,,,"The free opening of the vertical hatch or window of an emergency exit must be at least <e1>three metres</e1> in <e2>mechanical ventilation</e2> and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",greater-equal,synthetic
+36650de0-ef3c-4fd1-8199-f47c0e576076_4,,,the <e1>fire performance</e1> of the platform does not exceed <e2>A</e2>.,less-equal,synthetic
+72e7ed0c-9e73-46b2-a919-20f3fea337fd,"An area with a potentially flammable or explosive atmosphere must not be located in a building where there are dwellings, accommodation premises, institutions or assembly and business premises.",{'ID': '56_Finnish_FireSafety'},"An <e1>area</e1> with a potentially flammable or explosive atmosphere must not be located in a building where there are dwellings, accommodation premises, institutions or <e2>assembly</e2> and business premises.",none,annotated
+e8340500-38b6-461b-b00d-d3aa44ac1f0b_6,,,The <e1>condition</e1> of the water available from the hot water system may not exceed <e2>50 m</e2>.,less-equal,synthetic
+d0927095-9e43-4ce4-a740-d5df69dc1dc3,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",{'ID': '84_Finnish_Health-IndoorClimateAndVentilation'},"If the air flows of extract air categories 1 and <e1>2</e1> are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under <e2>category</e2> 2.",none,annotated
+78b82c71-b2a9-41ea-a5f9-45bdba64fa7a,The correct operation of each control function should be tested where it is practical.,{'ID': '218_UK_DocF_V1_Ventilation'},The correct <e1>operation</e1> of each <e2>control function</e2> should be tested where it is practical.,part-of,annotated
+956efc87-87de-4d3c-99fb-dc58eab9353b,"A  dwelling  that  is  intended  for  sheltered  housing  or  supported  housing  of  a  person  with mobility or functional impairment shall have at least one toilet and washing facility which has a  free  space  with  a  diameter  of  at  least  1,500  millimetres.",{'ID': '42_Finnish_Accessibility'},"A dwelling that is intended for sheltered housing or supported housing of a person with mobility or functional impairment shall have at least <e1>one</e1> toilet and washing facility which has a free space with a <e2>diameter</e2> of at least 1,500 millimetres.",none,annotated
+6d190990-05e3-4496-8945-320d5937c7b8,Controls should be provided for ventilators so that the ventilation in each room can be adjusted.,{'ID': '58_UK_DocF_V2_Ventilation'},<e1>Controls</e1> should be provided for <e2>ventilators</e2> so that the ventilation in each room can be adjusted.,necessity,annotated
+5305da48-b810-4fd8-a0b3-7520f89ff401,"When installing or renovating thermal elements, the element being installed should be draught-proofed, and air-leakage gaps should be filled.",{'ID': '194_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When installing or <e1>renovating</e1> <e2>thermal elements</e2>, the element being installed should be draught-proofed, and air-leakage gaps should be filled.",selection,annotated
+fdd9f39e-e397-4172-b4da-3d213a30f987,On-site electricity generation should be provided with automated controls that support the design of the system and the intended use.,{'ID': '335_UK_DocM_V2_AccessAndUseOfBuildings'},On-site electricity generation should be provided with automated <e1>controls</e1> that <e2>support the design of the system and the intended use</e2>.,selection,annotated
+7d7d55f1-b28d-4ce8-aec6-dd4dc0786ce8_11,,,"For sizes of cylinder not listed, the <e1>street areas</e1> from the cylinder should not exceed <e2>4</e2>, where V is the volume in litres.",less-equal,synthetic
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_10,,,"In buildings more than 9 metres and at most 28 metres in height, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than <e1>300mm</e1> in <e2>operation</e2>, these must be accessible via the interior.",greater,synthetic
+e15250c0-1279-4d29-a1ec-31560b045007_5,,,<e1>Turning circle</e1> of basement storeys must not be connected to fire and smoke-proof <e2>seats</e2>.,not-part-of,synthetic
+51284e52-f2f4-41b5-85e2-3fa96ab8602a,"All users of facilities should be able to locate suitable seating and move safely and easily to and from the seating area and ancillary accommodation, such as lavatories, dining rooms and bedroom suites.",{'ID': '132_UK_DocM_V2_AccessAndUseOfBuildings'},"All users of <e1>facilities</e1> should be able to locate suitable seating and <e2>move safely and easily to and from the seating area and ancillary accommodation, such as lavatories, dining rooms and bedroom suites</e2>.",none,annotated
+6414854d-01f9-481f-a7f4-c4581e48d8b1_2,,,Special safety features are not necessary if the <e1>lead boiler</e1> is not more than <e2>(16.66 8.33 V0.4)/(1000 24)</e2> long.,less-equal,synthetic
+7d7d55f1-b28d-4ce8-aec6-dd4dc0786ce8_7,,,"For sizes of cylinder not listed, the <e1>roof windows</e1> from the cylinder should not exceed <e2>300mm</e2>, where V is the volume in litres.",less-equal,synthetic
+a387fcb8-ead2-4094-9be9-72d783468b33_6,,,"If the <e1>protective part</e1> of windows, roof windows, rooflights and doors exceeds <e2>20 points</e2> of the total floor area of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",greater,synthetic
+703e5c71-bd54-4267-acf4-fa7db1e70d49,"Any sound system in an auditorium, a restaurant, a conference facility, a facility for festive occasions, a teaching facility or other similar assembly facility or a public service facility shall have an induction loop or a similar sound transmission system.",{'ID': '67_Finnish_Accessibility'},"Any <e1>sound system</e1> in an auditorium, a <e2>restaurant</e2>, a conference facility, a facility for festive occasions, a teaching facility or other similar assembly facility or a public service facility shall have an induction loop or a similar sound transmission system.",part-of,annotated
+ed2cca4a-50f7-470d-9752-dd8722385a24,"In dwellings and other premises that are used by children, restrictors must be installed on windows and other openings where there may be a danger of falling, and these must be such that they limit the easy opening of the window to 100 millimetres.",{'ID': '80_Finnish_SafetyOfUse'},"In dwellings and other premises that are used by children, <e1>restrictors</e1> must be installed on windows and other <e2>openings</e2> where there may be a danger of falling, and these must be such that they limit the easy opening of the window to 100 millimetres.",necessity,annotated
+4e119abd-0cf7-4c60-9c7b-1083f9b46280,"NOTE: If an exposed facade is close to an area of sustained and loud noise (e.g. a main road), then a noise attenuating background ventilator should be fitted.",{'ID': '85_UK_DocF_V2_Ventilation'},"NOTE: If an <e1>exposed</e1> facade is close to an area of sustained and loud noise (e.g. a main road), then a noise attenuating background ventilator should be <e2>fitted</e2>.",none,annotated
+eccd4f77-ef4a-41fd-a22a-620c84fdddd4_6,,,There is a minimum of <e1>55</e1> of worktop to at least <e2>inner surfaces</e2> of the oven and fridge or fridge freezer where this is taller than the worktop height (or to one side of a pair of tall appliances where they are located together at the end of a run).,greater-equal,synthetic
+ec1783bd-3e59-42d6-9709-cd0cc7d2c365,The air flow resistance of all components should be considered when specifying ventilation systems.,{'ID': '55_UK_DocF_V1_Ventilation'},The <e1>air flow resistance</e1> of all <e2>components</e2> should be considered when specifying ventilation systems.,part-of,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_8,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for <e1>presence</e1> <e2>0.052083333</e2> and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",equal,synthetic
+783c19fa-0ef2-466f-b3e9-d4690e34ac5f,Where a system for onsite electricity generation is installed (a) reasonable provision must be made to ensure that (i) the system and its electrical output are appropriately sized for the site and available infrastructure; (ii) the system has effective controls; and (b) it must be commissioned by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.,{'ID': '214_UK_DocL_V1_ConsrvationOfFuelAndPower'},Where a <e1>system for onsite electricity generation</e1> is <e2>installed</e2> (a) reasonable provision must be made to ensure that (i) the system and its electrical output are appropriately sized for the site and available infrastructure; (ii) the system has effective controls; and (b) it must be commissioned by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.,selection,annotated
+8e9ef8dc-18bd-4877-98cd-556aa4adee8f,"Reasonable provision shall be made for the conservation of fuel and power in buildings by: (a) limiting heat gains and losses (i) through thermal elements and other parts of the building fabric; and (ii) from pipes, ducts and vessels used for space heating, space cooling and hot water services; (b) providing fixed building services which (i) are energy efficient to a reasonable standard; (ii) have effective controls; and (iii) are commissioned by testing and adjusting as necessary to ensure they use no more fuel and power than is reasonable in the circumstances.",{'ID': '431_UK_DocM_V2_AccessAndUseOfBuildings'},"Reasonable <e1>provision</e1> shall be made for the conservation of fuel and power in buildings by: (a) limiting heat gains and losses (i) through thermal elements and other parts of the building fabric; and (ii) from pipes, ducts and vessels used for space heating, space cooling and hot water services; (b) providing fixed building services which (i) are <e2>energy efficient to a reasonable standard</e2>; (ii) have effective controls; and (iii) are commissioned by testing and adjusting as necessary to ensure they use no more fuel and power than is reasonable in the circumstances.",none,annotated
+8e83d841-dcab-479c-a131-a5ce80cd416d,The fan speed should be set to achieve the desired continuous flow rate.,{'ID': '197_UK_DocF_V1_Ventilation'},The fan <e1>speed</e1> should be <e2>set to achieve the desired continuous flow rate</e2>.,necessity,annotated
+cccbc1ea-27be-4d7b-b53c-3cb467a51020,"For heating and cooling systems in a new non-domestic building, or when a heat generator such as a boiler is replaced in an existing non-domestic building, each room should be provided with thermostatic room controls.",{'ID': '220_UK_DocM_V2_AccessAndUseOfBuildings'},"For heating and cooling systems in a new non-domestic building, or when a <e1>heat generator</e1> such as a <e2>boiler</e2> is replaced in an existing non-domestic building, each room should be provided with thermostatic room controls.",selection,annotated
+c952db0f-b605-4335-8d56-97fc339ad5ba,All three parts of the installation and commissioning checklist should be completed.,{'ID': '262_UK_DocF_V1_Ventilation'},All three <e1>parts</e1> of the <e2>installation and commissioning checklist</e2> should be completed.,part-of,annotated
+511c1a7f-08b9-48ec-aea6-9b749fdf31a1,"A non-residential building shall, considering the intended use and functional units of the building and distances in the building, have an adequate number of appropriately located toilet facilities which are suitable for users of wheelchairs and walking frames with wheels.",{'ID': '51_Finnish_Accessibility'},"A non-residential building shall, <e1>considering the intended use and functional units of the building and distances in the building</e1>, have an <e2>adequate number</e2> of appropriately located toilet facilities which are suitable for users of wheelchairs and walking frames with wheels.",selection,annotated
+3f7c10d1-d801-4351-bc85-187cf8cffeb3,The water vapour resistance and air tightness of external walls and their various layers as well as the structures attached to the external wall and joints to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,{'ID': '96_Finnish_Health-Humidity'},The <e1>water vapour resistance</e1> and air tightness of external walls and their various layers as well as the structures attached to the external wall and joints to the external wall must <e2>prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures</e2>.,necessity,annotated
+9c9a27b6-b4be-4946-854a-c46ee812140c,"In general, accessible bedrooms should be no less advantageously situated than other bedrooms.",{'ID': '142_UK_DocM_V2_AccessAndUseOfBuildings'},"In general, <e1>accessible</e1> <e2>bedrooms</e2> should be no less advantageously situated than other bedrooms.",selection,annotated
+ad30824c-74be-4f4f-916a-dfe1e0a89205,"It should be noted that double buggies are wider than wheelchairs and that, where relevant to the building type, this should be borne in mind when determining an appropriate effective clear width for an entrance door.",{'ID': '67_UK_DocM_V2_AccessAndUseOfBuildings'},"It should be noted that double buggies are wider than wheelchairs and that, where relevant to the building type, this should be borne in mind when determining an <e1>appropriate</e1> effective <e2>clear width</e2> for an entrance door.",selection,annotated
+339fc78c-a2f2-481c-a410-3aeb41e24b8a_3,,,Solid walls constructed of coursed brickwork or blockwork should be at least as <e1>projection</e1> as <e2>50</e2> of the storey height.,greater-equal,synthetic
+9b908e68-0f92-4883-9fd2-7fe013848b15,"Where a gas combination boiler is used, the boiler type should be selected to modulate down to the typical heating load of the dwelling.",{'ID': '237_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a <e1>gas combination boiler</e1> is used, the <e2>boiler type</e2> should be selected to modulate down to the typical heating load of the dwelling.",part-of,annotated
+0da52584-1b37-48b5-840f-3795ae695275_5,,,the minimum clear dimensions of the platform are: 1100mm wide and <e1>65 degrees Celsius</e1> <e2>open outwards</e2> where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+b63dcef6-1840-4e9e-ad51-f8fc481fe856,"The wall ties should have a horizontal spacing of 900mm and a vertical spacing of 450mm, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",{'ID': '36_UK_DocA_Structure'},"The wall ties should have a horizontal spacing of <e1>900mm</e1> and a <e2>vertical spacing</e2> of 450mm, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",none,annotated
+8aa4b706-1659-4e30-a4fe-e7f33efe3241_4,,,All <e1>certain proportion</e1> <e2>exhaust outlets</e2> of the compliance checklist should be completed.,equal,synthetic
+6b2f3ca5-8cea-4616-8679-438446bc6233,"Since doors are potential barriers, their use should be avoided whenever appropriate.",{'ID': '88_UK_DocM_V2_AccessAndUseOfBuildings'},"Since doors are <e1>potential</e1> <e2>barriers</e2>, their use should be avoided whenever appropriate.",selection,annotated
+e1f1aeb9-7453-4b6b-b3f1-6049d711868a,The fire performance of the external wall structure of a building no more than 56 metres in height may also be demonstrated by a fullscale test.,{'ID': '156_Finnish_FireSafety'},The <e1>fire performance</e1> of the external wall structure of a building no more than 56 metres in height may also be <e2>demonstrated by a fullscale test</e2>.,necessity,annotated
+6075de3c-d339-4ba4-9945-990480975615_11,,,"Where a kitchen and living room accommodation are not separate rooms (i.e. open plan), no fewer than <e1>2</e1> <e2>leaf</e2> of the same equivalent area as for other habitable rooms should be provided within the open-plan space.",greater-equal,synthetic
+cc72106e-9e7f-47cf-8a95-0173a8305dad_1,,,"In a new building, the crawl space <e1>effective rated output</e1> must be <e2>0.2</e2> on average at the minimum.",greater-equal,synthetic
+d6a2b6b7-57d2-449d-89f5-56d3df4755e2,Any radiator or towel rail should be clear of all access zones.,{'ID': '56_UK_DocM_V1_AccessAndUseOfBuildings'},Any <e1>radiator</e1> or <e2>towel rail</e2> should be clear of all access zones.,none,annotated
+ef4f54b6-1099-4404-9fa2-d0c0d5e55543_1,,,The <e1>long</e1> must not exceed the individual dwellings <e2>rated output</e2>.,less-equal,synthetic
+7f49ccb1-ce2c-47eb-8b22-2c8e806e5d88,The resilient layer should be to the full height of the door and 600mm either side of the doorset.,{'ID': '15_UK_DocQ_Security_Dwellings'},The <e1>resilient layer</e1> should be <e2>to the full height of the door</e2> and 600mm either side of the doorset.,necessity,annotated
+5ca184fa-e100-4f97-957d-e37ae944786f,The cost of installing electric vehicle charge points and cable routes is not more than 7% of the total capital cost of the major renovation.,{'ID': '51_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},The cost of installing electric vehicle charge points and cable routes is not more than <e1>7%</e1> of the <e2>total capital cost</e2> of the major renovation.,part-of,annotated
+2f0f22aa-06d3-478d-a777-5aca5c2fb5c1,"For sliding doors and gates, provide both of the following: (i) a stop or other effective means to prevent them coming off the end of the track; (ii) a retaining rail to prevent doors and gates falling if the suspension system fails or the rollers leave the track.",{'ID': '120_UK_DocK_ProtectionFromFalling'},"For sliding doors and gates, provide both of the following: (i) a stop or <e1>other effective</e1> <e2>means</e2> to prevent them coming off the end of the track; (ii) a retaining rail to prevent doors and gates falling if the suspension system fails or the rollers leave the track.",selection,annotated
+75c60084-6878-472d-8694-e8739e0dd76c_9,,,The width of access routes in assembly areas with a <e1>sizes</e1> of <e2>15</e2> must be at least 900 millimetres.,equal,synthetic
+81314489-dcd9-410f-9b15-595b87e7c8f9,"The resilient layer should be timber sheathing at least 9mm thick, expanded metal or a similar resilient material.",{'ID': '14_UK_DocQ_Security_Dwellings'},"The resilient layer should be timber sheathing at least 9mm thick, expanded metal or a <e1>similar</e1> <e2>resilient material</e2>.",selection,annotated
+113b8bf8-1856-45f5-a54b-d65ef100b437,"If a gas-fired combination boiler is installed in an existing dwelling, at least one of the following energy efficiency measures, appropriate to the system, should be installed.",{'ID': '262_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If a gas-fired <e1>combination boiler</e1> is installed in an existing <e2>dwelling</e2>, at least one of the following energy efficiency measures, appropriate to the system, should be installed.",part-of,annotated
+8c4a09c5-1eb2-4a41-86d9-b69c031b4592,Ground arrays including header pipes and manifolds should be flushed as one system to remove all debris and purged to remove all air.,{'ID': '384_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Ground arrays</e1> including header pipes and <e2>manifolds</e2> should be flushed as one system to remove all debris and purged to remove all air.,part-of,annotated
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",{'ID': '75_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If the <e1>cost</e1> of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major <e2>renovation</e2>.",none,annotated
+a86b58e8-046f-44b7-8e1b-00c876c8c647,"Parapets in categories A to E and panel parts of walls acting as parapets, as well as their fasteners, shall be designed to the concentrated load Qk = 0.3 kN acting on a random spot.",{'ID': '30_Finnish_StabilityOfStructures'},"Parapets in categories A to E and panel parts of walls acting as parapets, as well as their <e1>fasteners</e1>, shall be <e2>designed to the concentrated load Qk = 0.3 kN acting on a random spot</e2>.",necessity,annotated
+8207751f-13b8-4fe3-9bfe-4423093d4905,A  building  with  dwellings  or  accommodation  or  patient  rooms  shall  be  designed  and implemented so that the reverberation time of the staircase and exit route is no more than 1.3 seconds.,{'ID': '26_Finnish_AcousticEnvironment'},A <e1>building</e1> with dwellings or accommodation or patient rooms shall be <e2>designed and implemented</e2> so that the reverberation time of the staircase and exit route is no more than 1.3 seconds.,necessity,annotated
+baee716c-b8c2-4500-b4de-63fa11f007b1_3,,,A minimum of one in <e1>16/01/2023 00:00</e1> of the remaining <e2>Water pipes</e2> must have access to cable routes.,equal,synthetic
+f4b0b5b8-ab26-46a2-8028-c279958fa927,"Any justification and strategy should be in line with the approved airtightness testing methodology, CIBSEs TM23.",{'ID': '355_UK_DocM_V2_AccessAndUseOfBuildings'},"Any justification and <e1>strategy</e1> should be <e2>in line with the approved airtightness testing methodology, CIBSEs TM23</e2>.",necessity,annotated
+45338082-ca66-418b-8fe1-8f2be926f330_4,,,A <e1>fire compartments</e1> of no more than <e2>160 millimetres</e2> may pass between the stair steps.,less-equal,synthetic
+1ebce0c9-705c-47ee-8429-e83cfbed72db,"All walls, ducts and boxings to every WC/cloakroom, bath and shower room are strong enough to support grab rails, seats and other adaptations that could impose a load of 1.5kN/m2.",{'ID': '103_UK_DocM_V1_AccessAndUseOfBuildings'},"All walls, <e1>ducts</e1> and boxings to every <e2>WC/cloakroom</e2>, bath and shower room are strong enough to support grab rails, seats and other adaptations that could impose a load of 1.5kN/m2.",part-of,annotated
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",{'ID': '75_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the <e1>total cost</e1> of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that <e2>installation</e2> exceeds 7% of the total cost of the major renovation.",none,annotated
+45adb0b6-63ee-4f42-b6a3-8fc396221c67_3,,,The <e1>length</e1> of the insulation plus any required air gap should be at least to the <e2>internal temperature</e2> of the rafters.,greater-equal,synthetic
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab_11,,,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the <e1>value</e1> of that installation exceeds <e2>8 per cent (1:12.5)</e2> of the total cost of the major renovation.",greater,synthetic
+984c252b-74f4-4d85-9080-1c8ae1851eca,"If performance requires thicker glass to be used, an equivalent window unit with standard thickness (6mm) glazing should be shown to meet the required standard.",{'ID': '113_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If performance requires thicker glass to be used, an equivalent window unit with <e1>standard thickness</e1> (6mm) glazing should be <e2>shown to meet the required standard</e2>.",none,annotated
+8364a5f1-f80e-484c-9f38-bffc6f4c1876_9,,,"Where communal parking is provided to blocks of flats, at least <e1>0.15 dm3/s per m2</e1> standard <e2>access points</e2> is provided close to the communal entrance of each core of the block (or to the lift core where the parking bay is internal).",greater-equal,synthetic
+e43c1e88-be80-42d9-944e-1bf0f0f82479_8,,,Individual flights are: for gradients up to 1:15 not more than <e1>1.2W/(m2K)</e1> <e2>surface area</e2>; for gradients up to 1:12 not more than 5m long.,less-equal,synthetic
+29232335-402c-4ed9-af74-fd093ac22e28_1,,,The natural or mechanical ventilation system of a building shall be strong and its air-tightness shall be at least <e1>either side</e1> <e2>3m</e2>.,greater-equal,synthetic
+3c28dbd6-8a3d-4ede-ae08-89e4b5d69d60_5,,,The approach route is a minimum of 900mm wide with a maximum <e1>directions</e1> of <e2>30m2</e2>.,less-equal,synthetic
+eccd4f77-ef4a-41fd-a22a-620c84fdddd4_0,,,There is a minimum of <e1>one</e1> of worktop to at least <e2>calculation of primary energy and CO2 emissions</e2> of the oven and fridge or fridge freezer where this is taller than the worktop height (or to one side of a pair of tall appliances where they are located together at the end of a run).,greater-equal,synthetic
+8d11b1a7-732a-4153-9564-3f35cc111cb6,A dwelling that is only a basement should be treated as a single-storey dwelling above ground level.,{'ID': '74_UK_DocF_V1_Ventilation'},A <e1>dwelling</e1> that is <e2>only a basement</e2> should be treated as a single-storey dwelling above ground level.,selection,annotated
+38cd3221-7fc9-4462-be20-78b16a4309d3_9,,,The <e1>entrance level</e1> of openings in the newly created dwelling should not be more than <e2>15mm</e2> of the total floor area.,less-equal,synthetic
+6b2f3ca5-8cea-4616-8679-438446bc6233,"Since doors are potential barriers, their use should be avoided whenever appropriate.",{'ID': '88_UK_DocM_V2_AccessAndUseOfBuildings'},"Since doors are <e1>potential</e1> barriers, their <e2>use</e2> should be avoided whenever appropriate.",none,annotated
+5fa7daca-cb50-4397-a736-617e52d30187_1,,,"If efficiencies at below 30% are required and unavailable, the <e1>constraints</e1> may be taken as equal to that at <e2>600kg/m3</e2>.",equal,synthetic
+203faa23-7b71-47c9-a6e5-2333ac45389e_7,,,"The <e1>facade area</e1> of the indoor steps of dwelling units and living quarters may be no more than <e2>100</e2>, and the tread must be no less than 250 millimetres.",less-equal,synthetic
+6bf41e87-d7c1-42a5-bf0d-67c711a21753,"Additionally, a sign identifying the floor reached should be provided on each landing in a location that can be easily seen from the lifting device and is designed so that it contrasts visually with its surrounding.",{'ID': '105_UK_DocM_V2_AccessAndUseOfBuildings'},"Additionally, a <e1>sign</e1> identifying the floor reached should be <e2>provided on each landing in a location that can be easily seen from the lifting device</e2> and is designed so that it contrasts visually with its surrounding.",necessity,annotated
+31d635b2-1d32-49dd-a848-5b5acaf50128,"For existing dwellings, when installing a complete new or replacement system (e.g. replacing a heating system including the heating appliance, pipework and heat emitters), the energy performance of the whole system should be assessed.",{'ID': '407_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For existing dwellings, when installing a complete new or replacement system (e.g. replacing a heating system including the heating appliance, pipework and heat emitters), the <e1>energy performance</e1> of the whole <e2>system</e2> should be assessed.",part-of,annotated
+2c725d50-13d5-4e77-bacf-9f174530e27c,The energy efficiency of historic and traditional buildings should be improved only if doing so will not cause long-term deterioration of the buildings fabric or fittings.,{'ID': '17_UK_DocM_V2_AccessAndUseOfBuildings'},The <e1>energy efficiency</e1> of historic and <e2>traditional</e2> buildings should be improved only if doing so will not cause long-term deterioration of the buildings fabric or fittings.,none,annotated
+2cc3d5b0-d3b4-45f2-a00d-838fd3f9abbb_5,,,"There should be a <e1>motor</e1>, in the absence of tobacco smoke or other excessive pollutants, of <e2>600 x 600 millimetres</e2>.",equal,synthetic
+ff3e8f86-1542-4f54-a776-cfdc8482bad7_0,,,The <e1>air flow resistance</e1> of an air conditioner working in cooling mode should be a minimum of <e2>0.15 dm3/s per m2</e2>.,greater-equal,synthetic
+759d26ff-821f-4949-9096-a7e15c5580f6,Windows and doors: should be installed in such a way that the thermal integrity of the insulated plane is maintained.,{'ID': '137_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Windows</e1> and doors: should be <e2>installed</e2> in such a way that the thermal integrity of the insulated plane is maintained.,necessity,annotated
+8fcdc238-3c30-4659-9303-1b126a39b2cd_8,,,The design solar load should be <e1>from outside to inside the dwelling</e1> by at least <e2>800 millimetres</e2>.,greater-equal,synthetic
+e32bbb47-c826-40c1-8ea4-8c32353d3fd2_3,,,There shall be <e1>6m</e1> of <e2>ties</e2> provided for people in the building.,equal,synthetic
+f7935bb4-9e5f-4e91-bbf1-54e45c1ef24c,A building with a height exceeding 9 metres must be equipped with anchoring structures for safety lines.,{'ID': '127_Finnish_SafetyOfUse'},A building with a <e1>height</e1> exceeding <e2>9 metres</e2> must be equipped with anchoring structures for safety lines.,greater,annotated
+8421f806-70f2-46a9-a308-90a40da3541d_6,,,"Where the <e1>internal temperature</e1> of the approach, whether over its whole length or in part, is <e2>1 in 40</e2> or steeper, that part of the approach should be designed as ramped access.",greater-equal,synthetic
+ebc429f0-cb90-41ab-9a11-401a2ddc7bad,"For continuous mechanical ventilation systems, such as continuous mechanical extract ventilation or mechanical ventilation with heat recovery, the system should be balanced to achieve design air flow rates at each room terminal.",{'ID': '268_UK_DocF_V1_Ventilation'},"For continuous mechanical ventilation systems, such as continuous <e1>mechanical</e1> <e2>extract ventilation</e2> or mechanical ventilation with heat recovery, the system should be balanced to achieve design air flow rates at each room terminal.",selection,annotated
+993e54cc-49c3-43cb-995e-1a951c93c775_5,,,"When a warning sign is not posted, the areas shall be designed to an axle load Qk and also to an <e1>Manual control</e1> equal to <e2>20 points</e2>.",equal,synthetic
+5925ca4d-801c-42e4-b581-a176dea2519f,"If thermal energy is supplied from a district heat network, a CO2 emission factor and primary energy factor for the heat delivered to the dwelling by the district heat network should be calculated.",{'ID': '76_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If thermal energy is supplied from a district heat network, a CO2 emission factor and <e1>primary energy factor</e1> for the <e2>heat</e2> delivered to the dwelling by the district heat network should be calculated.",part-of,annotated
+81314489-dcd9-410f-9b15-595b87e7c8f9_3,,,"The resilient layer should be timber sheathing at least <e1>25 decibels</e1> <e2>heat</e2>, expanded metal or a similar resilient material.",greater-equal,synthetic
+c9983da5-23f1-4211-88ce-68e4753e4ab9,"A target primary energy rate, target emission rate, building primary energy rate and the building emission rate should be calculated for non-exempt buildings with low energy demand.",{'ID': '102_UK_DocM_V2_AccessAndUseOfBuildings'},"A <e1>target primary energy rate</e1>, target emission rate, building primary energy rate and the <e2>building emission rate</e2> should be calculated for non-exempt buildings with low energy demand.",none,annotated
+f0c72b35-5a0a-4554-8713-96f6f73a67f1_4,,,A cube with <e1>size</e1> of no more than <e2>30% load</e2> may pass between the lower edge of a barriers protective part and the landing or the upper surface or edge of a step.,less-equal,synthetic
+2695c899-0ada-478c-9b2d-796f79ea4c52,"Glazing, with which people are likely to come into contact whilst moving in or about the building shall: (a) if broken on impact, break in a way which is unlikely to cause injury; or (b) resist impact without breaking; or (c) be shielded or protected from impact.",{'ID': '92_UK_DocK_ProtectionFromFalling'},"<e1>Glazing</e1>, with which people are likely to come into contact whilst moving in or about the building shall: (a) if broken on impact, <e2>break in a way which is unlikely to cause injury</e2>; or (b) resist impact without breaking; or (c) be shielded or protected from impact.",necessity,annotated
+a235c68f-ae44-4770-b005-4e9d7b659eb7_1,,,All cavity walls should have leaves at least 90mm thick and cavities at least <e1>three metres</e1> <e2>Signs</e2>.,greater-equal,synthetic
+759d26ff-821f-4949-9096-a7e15c5580f6,Windows and doors: should be installed in such a way that the thermal integrity of the insulated plane is maintained.,{'ID': '137_UK_DocL_V1_ConsrvationOfFuelAndPower'},Windows and <e1>doors</e1>: should be <e2>installed</e2> in such a way that the thermal integrity of the insulated plane is maintained.,necessity,annotated
+7602a501-a5b5-429c-99e1-8bc801243494,"The flooring and wall covering must provide waterproofing, or separate waterproofing must be installed under the flooring and behind the wall covering.",{'ID': '111_Finnish_Health-Humidity'},"The flooring and <e1>wall covering</e1> must provide waterproofing, or separate <e2>waterproofing</e2> must be installed under the flooring and behind the wall covering.",necessity,annotated
+d988e207-c3f9-4314-9a16-f99b334595f4_4,,,The <e1>Activation</e1> must be no less than <e2>0.15 dm3/s per m2</e2>.,greater-equal,synthetic
+5fa7daca-cb50-4397-a736-617e52d30187_7,,,"If <e1>span</e1> at below 30% are required and unavailable, the <e2>planned time of use</e2> may be taken as equal to that at 30% load.",equal,synthetic
+46ee0eda-086a-40ab-8e8f-bfa4c85abd49,"If the indoor access route leading to an evacuation area in a non-residential building is via the indoor stairs in the area, these stairs must be wide enough that they can be used to transport an immobile individual on a stretcher.",{'ID': '16_Finnish_SafetyOfUse'},"If the indoor <e1>access route</e1> leading to an evacuation area in a non-residential building is via the indoor stairs in the area, these <e2>stairs</e2> must be wide enough that they can be used to transport an immobile individual on a stretcher.",none,annotated
+c47598f9-df79-4d77-aba9-8f380342372f_8,,,extract air of <e1>floor area</e1> <e2>18 dm3/s</e2> shall be conducted to the outdoors through individual extract air ducts.,equal,synthetic
+3121fe90-27db-405e-a42a-df3cd22ee176_6,,,"Where necessary, <e1>0.7</e1><e2>design solution</e2>, one above the other, must be installed in order to take into account children and users of wheelchairs.",equal,synthetic
+f7cfdf57-28f3-4d23-90bf-ec2268e14bac,"Ramps, steps, thresholds and differences in levels in passageways must be clearly indicated using lighting and surface brightness contrasts or warning signs.",{'ID': '65_Finnish_SafetyOfUse'},"<e1>Ramps</e1>, steps, thresholds and differences in levels in <e2>passageways</e2> must be clearly indicated using lighting and surface brightness contrasts or warning signs.",selection,annotated
+b5addb77-be99-45a2-8dc0-fdf5d1969a57,Each column and wall shall be supplied with continuous vertical ties from the foundations to the roof level.,{'ID': '194_Finnish_StabilityOfStructures'},Each column and wall shall be supplied with continuous <e1>vertical</e1> <e2>ties</e2> from the foundations to the roof level.,selection,annotated
+113b8bf8-1856-45f5-a54b-d65ef100b437_11,,,"If a gas-fired combination boiler is installed in an existing dwelling, at least <e1>44mm</e1> of the following <e2>sections</e2>, appropriate to the system, should be installed.",greater-equal,synthetic
+51517a5d-dd11-41b9-b44b-36d87b959127,The presence of the door should be apparent not only when it is shut but also when it is open.,{'ID': '77_UK_DocM_V2_AccessAndUseOfBuildings'},The presence of the door should be apparent not only when it is shut but also when <e1>it</e1> is <e2>open</e2>.,selection,annotated
+77b0edab-012f-4047-a2db-fe6303993780,"Ventilation systems that, under normal operation, recirculate air between more than one space, room or zone should also be able to operate in a mode that reduces the risk of the transmission of airborne infection.",{'ID': '60_UK_DocF_V2_Ventilation'},"<e1>Ventilation systems</e1> that, under normal operation, recirculate air between more than one space, room or zone should also be <e2>able to operate in a mode that reduces the risk of the transmission of airborne infection</e2>.",necessity,annotated
+9415ae4b-7a74-4c70-a245-e4381c6d71bf_10,,,"At gables and party walls, insulation should extend to the wall; if the <e1>Windows, skylights and ventilators</e1> between the wall and joist is less than <e2>0.7 metres</e2>, perimeter insulation may be required.",less,synthetic
+19478a13-7457-4dd3-a394-744f826db7b0,"The handle to at least one window in the principal living area is 700-1000mm above floor level, unless fitted with a remote opening device that is within this height range.",{'ID': '127_UK_DocM_V1_AccessAndUseOfBuildings'},"The <e1>handle</e1> to at least one window in the principal living area is <e2>700-1000mm above floor level</e2>, unless fitted with a remote opening device that is within this height range.",necessity,annotated
+45338082-ca66-418b-8fe1-8f2be926f330,A cube of no more than 100 millimetres may pass between the stair steps.,{'ID': '52_Finnish_SafetyOfUse'},A <e1>cube</e1> of no more than <e2>100 millimetres</e2> may pass between the stair steps.,less-equal,annotated
+a5e9c36f-358f-4375-943c-6d5b89c82647,"Any abrupt level differences of over 0.7 metres and any precipices located in the vicinity of common play and recreation areas associated with buildings with more than two dwellings must be indicated by appropriate barriers or suitable planted areas, or outfitted with a base that cushions any fall.",{'ID': '92_Finnish_SafetyOfUse'},"Any abrupt level differences of over 0.7 metres and any <e1>precipices</e1> located in the vicinity of common play and recreation areas associated with buildings with more than two dwellings must be indicated by appropriate barriers or suitable planted areas, or <e2>outfitted with a base that cushions any fall</e2>.",necessity,annotated
+835d8fad-7a27-4299-aa38-a5b1771a6779,"In large building complexes, such as retail parks and large sports centres, there should be one wheelchair-accessible unisex toilet capable of including an adult changing table.",{'ID': '178_UK_DocM_V2_AccessAndUseOfBuildings'},"In large <e1>building complexes</e1>, such as retail parks and large sports centres, there should be one wheelchair-accessible unisex <e2>toilet</e2> capable of including an adult changing table.",necessity,annotated
+a387fcb8-ead2-4094-9be9-72d783468b33_5,,,"If the <e1>exit</e1> of windows, roof windows, rooflights and doors exceeds <e2>8.5m2</e2> of the total floor area of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",greater,synthetic
+12e545d1-64f4-45c9-a520-5b8a003eba0a_5,,,"If the dwelling has more than <e1>20mm</e1> exposed <e2>gas combination boiler</e2>, the area of background ventilators on each facade should be similar, to allow cross-ventilation.",greater,synthetic
+39a37d5e-3361-43b9-a209-e5cd45918abc,"For mixed-use buildings which have parking spaces within a covered car park, any requirements to install electric vehicle charge points or cable routes must first be applied to those parking spaces outside the covered car park.",{'ID': '95_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"For mixed-use <e1>buildings</e1> which have <e2>parking spaces</e2> within a covered car park, any requirements to install electric vehicle charge points or cable routes must first be applied to those parking spaces outside the covered car park.",part-of,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_10,,,"If the air flows of <e1>location</e1> <e2>150m2</e2> and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+0aaf71f0-a482-4a72-a407-0d6db79c7f6f_3,,,"In a building consisting primarily of one storey, no more than 200 m2 of fire-compartmented and no more than <e1>900mm</e1> of non-fire-compartmented <e2>Linear interpolation</e2> that essentially relate to the business of the building may be located on the level of second storey.",less-equal,synthetic
+4d80c4d1-08ee-481a-9f9c-e9151ce1094d_2,,,"The <e1>vertical spacing</e1> of windows, roof windows, rooflights and doors should not exceed <e2>400kg</e2> of the total floor area of the dwelling.",less-equal,synthetic
+08075a86-82be-487e-915b-2c8423f95cb8,The equivalent area of the opening should meet or exceed the free area of the opening.,{'ID': '39_UK_DocO_Overheating'},The <e1>equivalent area</e1> of the opening should <e2>meet or exceed the free area of the opening</e2>.,necessity,annotated
+0ea1e862-2434-4fc8-97a2-b076c992ef20_6,,,"The width of an exit must be at least 1,200 millimetres and its free <e1>energy  consumption</e1> must be at least <e2>1</e2>.",greater-equal,synthetic
+baee716c-b8c2-4500-b4de-63fa11f007b1_10,,,"A minimum of <e1>1,000 millimetres</e1> in five of the remaining <e2>air-leakage gaps</e2> must have access to cable routes.",greater-equal,synthetic
+26980508-105c-49db-8595-bf001a48d757_0,,,"In <e1>Roofs</e1> with no fixed seats or <e2>Insulating materials</e2>, the number of persons shall be calculated to be two persons per square metre.",not-part-of,synthetic
+e21fa967-934e-4a29-a66d-252fdbbf928f_8,,,"If the parasitic energy use is unknown, an <e1>performance standards</e1> of <e2>4</e2> should be made for any control system.",equal,synthetic
+a235c68f-ae44-4770-b005-4e9d7b659eb7_3,,,All cavity walls should have leaves at least <e1>10m</e1> <e2>Unit length</e2> and cavities at least 50mm wide.,greater-equal,synthetic
+e15250c0-1279-4d29-a1ec-31560b045007,Extinguishing routes of basement storeys must not be connected to fire and smoke-proof exits.,{'ID': '244_Finnish_FireSafety'},<e1>Extinguishing routes</e1> of basement storeys must not be connected to fire and smoke-proof <e2>exits</e2>.,not-part-of,annotated
+29c431ee-ea93-491d-ab13-06418d93c488,"If luminous efficacy is greater than 75 light source lumens per circuit-watt, manual control is acceptable.",{'ID': '338_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If luminous efficacy is greater than 75 light source lumens per circuit-watt, <e1>manual</e1> <e2>control</e2> is acceptable.",selection,annotated
+f2e57c55-e340-4fa2-87c5-03f4bf8e5942,"Where the dwelling is defined as wheelchair adaptable, it should be easy to install a lift.",{'ID': '82_UK_DocM_V1_AccessAndUseOfBuildings'},"Where the <e1>dwelling</e1> is defined as wheelchair adaptable, it should be <e2>easy to install a lift</e2>.",necessity,annotated
+3724fd47-22f7-432c-81a2-1abcb95c7df2_10,,,"The total number of ventilators installed in a dwellings habitable rooms and kitchens should be no fewer than five, except in one bedroom <e1>justification</e1>, where there should be no fewer than <e2>50 millimetres</e2>.",greater-equal,synthetic
+51517a5d-dd11-41b9-b44b-36d87b959127,The presence of the door should be apparent not only when it is shut but also when it is open.,{'ID': '77_UK_DocM_V2_AccessAndUseOfBuildings'},The presence of the door should be apparent not only when <e1>it</e1> is <e2>shut</e2> but also when it is open.,selection,annotated
+5b1fe636-d2aa-4382-885e-a4f8a2cae4d4_8,,,"Generally, a thermal element once upgraded should not have a <e1>ending</e1> greater than <e2>20 degrees Celsius</e2>.",less-equal,synthetic
+8421f806-70f2-46a9-a308-90a40da3541d,"Where the gradient of the approach, whether over its whole length or in part, is 1:20 or steeper, that part of the approach should be designed as ramped access.",{'ID': '41_UK_DocM_V2_AccessAndUseOfBuildings'},"Where the <e1>gradient</e1> of the approach, whether over its whole length or in part, is <e2>1:20</e2> or steeper, that part of the approach should be designed as ramped access.",greater-equal,annotated
+01008f69-874b-443e-bcb2-2f5630280049_9,,,"If stairs are used only as an emergency exit and if they lead to spaces in a dwelling or accommodation facility other than those that are necessary for living, the <e1>dimension</e1> may be no more than <e2>ten millimetres</e2> and the tread must be no less than 220 millimetres.",less-equal,synthetic
+082c7ed9-3579-48c2-a0d2-076f1edd647c,"Each of the two sections of the centrally hinged window should be assessed as a single side, bottom or top hung window.",{'ID': '112_UK_DocO_Overheating'},"Each of the two <e1>sections</e1> of the centrally hinged window should be <e2>assessed as a single side, bottom or top hung window</e2>.",necessity,annotated
+d925c189-860a-4fcb-ae88-d1cf8cc14fb8_3,,,"The tread of steps in covered or heated outdoor staircases must be no less than 300 millimetres, and the <e1>Geo-location</e1> may be no more than <e2>120</e2>.",less-equal,synthetic
+bb9ec292-062b-43c3-8590-856dd5f6b890_5,,,"The building primary energy rate and <e1>type and quality</e1> calculated using the measured air permeability must not be higher than the target primary energy rate and <e2>quality of the installation</e2>, respectively.",less-equal,synthetic
+7e34700e-92de-4b00-a820-f4085a2e186c_0,,,"If the <e1>design</e1> between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than <e2>15</e2>, the wall in question must be class EI 15.",less,synthetic
+45338082-ca66-418b-8fe1-8f2be926f330_2,,,A <e1>they</e1> of no more than <e2>24 degrees Celsius</e2> may pass between the stair steps.,less-equal,synthetic
+3f7b1106-06a0-4c3f-a01d-e275421775ac,That background ventilators allow fresh air into the home and should be left open.,{'ID': '228_UK_DocF_V1_Ventilation'},That <e1>background ventilators</e1> <e2>allow fresh air into the home</e2> and should be left open.,selection,annotated
+3724fd47-22f7-432c-81a2-1abcb95c7df2_11,,,"The total number of ventilators installed in a dwellings habitable rooms and kitchens should be no fewer than five, except in <e1>180kW</e1> <e2>exhaust outlets</e2> properties, where there should be no fewer than four.",equal,synthetic
+66b3628a-f0ee-4bc7-93c8-2ae0145a2e78_10,,,"In a <e1>barrier</e1> with no openable <e2>driveways</e2>, an intermittent extract fan should be provided with controls which continue to operate the fan for at least 15 minutes after the room is vacated.",not-part-of,synthetic
+3153d771-404e-4a54-ac05-ed1b75e37506_5,,,"Gangways should not be less than <e1>200 lux</e1> <e2>projection</e2> unless used by not more than 50 persons, in which case gangways should be a minimum of 900mm.",greater-equal,synthetic
+33ed3038-99a6-4b2d-906a-a1db21f2d898,"For heating systems in new dwellings, or when a heat generator such as a boiler is replaced in an existing dwelling, each room should be provided with thermostatic room controls.",{'ID': '250_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For heating systems in new dwellings, or when a heat generator such as a boiler is replaced in an existing dwelling, each <e1>room</e1> should be provided with <e2>thermostatic room controls</e2>.",necessity,annotated
+ef561e39-db90-462c-8dde-15fbeae954e5,A cube with edges of no more than 200 millimetres may pass between the upper edge of the barrier and the protective part.,{'ID': '50_Finnish_SafetyOfUse'},A <e1>cube</e1> with <e2>edges</e2> of no more than 200 millimetres may pass between the upper edge of the barrier and the protective part.,part-of,annotated
+46ee0eda-086a-40ab-8e8f-bfa4c85abd49,"If the indoor access route leading to an evacuation area in a non-residential building is via the indoor stairs in the area, these stairs must be wide enough that they can be used to transport an immobile individual on a stretcher.",{'ID': '16_Finnish_SafetyOfUse'},"If the indoor <e1>access route</e1> leading to an evacuation area in a non-residential building is via the indoor <e2>stairs</e2> in the area, these stairs must be wide enough that they can be used to transport an immobile individual on a stretcher.",part-of,annotated
+759d26ff-821f-4949-9096-a7e15c5580f6,Windows and doors: should be installed in such a way that the thermal integrity of the insulated plane is maintained.,{'ID': '137_UK_DocL_V1_ConsrvationOfFuelAndPower'},Windows and doors: should be installed in such a way that the <e1>thermal integrity</e1> of the <e2>insulated plane</e2> is maintained.,part-of,annotated
+835d8fad-7a27-4299-aa38-a5b1771a6779,"In large building complexes, such as retail parks and large sports centres, there should be one wheelchair-accessible unisex toilet capable of including an adult changing table.",{'ID': '178_UK_DocM_V2_AccessAndUseOfBuildings'},"In large building complexes, such as retail parks and large sports centres, there should be one <e1>wheelchair-accessible</e1> unisex <e2>toilet</e2> capable of including an adult changing table.",selection,annotated
+fc129e2c-abfa-48be-9fd6-e85f077ae67b,"A space alongside the leading edge of a door should be provided to enable a wheelchair user to reach and grip the door handle, then open the door without releasing hold on the handle and without the footrest colliding with the return wall.",{'ID': '70_UK_DocM_V2_AccessAndUseOfBuildings'},"A space <e1>alongside the leading edge</e1> of a door should be provided to <e2>enable a wheelchair user to reach and grip the door handle, then open the door without releasing hold on the handle and without the footrest colliding with the return wall</e2>.",none,annotated
+563cd5fb-adc9-4bde-8b34-4accc93ac84b,"Systems should not be significantly oversized in most circumstances, the cooling appliance should not be sized for more than 120 of the design cooling load.",{'ID': '331_UK_DocL_V1_ConsrvationOfFuelAndPower'},"<e1>Systems</e1> should <e2>not be significantly oversized in most circumstances</e2>, the cooling appliance should not be sized for more than 120 of the design cooling load.",necessity,annotated
+e3b85ad6-6132-40d7-86f8-3cc5d44eb12c_5,,,<e1>9mm</e1> <e2>floor</e2> should be close to an accessible bathroom suitable for a wheelchair user.,equal,synthetic
+46ee0eda-086a-40ab-8e8f-bfa4c85abd49,"If the indoor access route leading to an evacuation area in a non-residential building is via the indoor stairs in the area, these stairs must be wide enough that they can be used to transport an immobile individual on a stretcher.",{'ID': '16_Finnish_SafetyOfUse'},"If the indoor access route leading to an evacuation area in a non-residential building is via the indoor stairs in the area, these <e1>stairs</e1> must be <e2>wide enough that they can be used to transport an immobile individual on a stretcher</e2>.",necessity,annotated
+19478a13-7457-4dd3-a394-744f826db7b0,"The handle to at least one window in the principal living area is 700-1000mm above floor level, unless fitted with a remote opening device that is within this height range.",{'ID': '127_UK_DocM_V1_AccessAndUseOfBuildings'},"The handle to at least one <e1>window</e1> in the <e2>principal</e2> living area is 700-1000mm above floor level, unless fitted with a remote opening device that is within this height range.",none,annotated
+536b172d-ccd1-479a-8136-6ee05db0f264_4,,,"Where pipework is above ground, the performance of the pipe <e1>Beading</e1> should be at least as high as the <e2>pressures</e2> of pipework in the buried part of the system.",greater-equal,synthetic
+75c60084-6878-472d-8694-e8739e0dd76c_6,,,The width of access routes in assembly areas with a <e1>horizontal spacing</e1> of <e2>180kW</e2> must be at least 900 millimetres.,equal,synthetic
+dd056285-1aa4-4c6d-94ac-b911458cb7ea,"Where any of the parking spaces for new buildings other than residential or mixed-use buildings are in a covered car park, the requirement to install an electric vehicle charge point should be met by installing a charge point in a parking space that is not within a covered car park.",{'ID': '70_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where any of the parking spaces for new buildings other than residential or mixed-use buildings are in a covered car park, the requirement <e1>to install an electric vehicle charge point</e1> should be <e2>met by installing a charge point in a parking space that is not within a covered car park</e2>.",none,annotated
+7f3f59a4-fc7e-4b14-8074-384f6cacf548_10,,,"The height of a barrier in a dwellings indoor areas may, however, be at least 0.9 metres if the <e1>number of persons</e1> is less than <e2>900mm</e2>.",less,synthetic
+d43e4877-601c-43eb-9d33-96945754374b,Good acoustic design should be employed to achieve an acoustic environment that is neither too reverberant nor too absorbent so that announcements and conversations can be heard clearly.,{'ID': '99_UK_DocM_V2_AccessAndUseOfBuildings'},Good <e1>acoustic design</e1> should be employed to achieve an acoustic environment <e2>that is neither too reverberant nor too absorbent</e2> so that announcements and conversations can be heard clearly.,none,annotated
+244aeb26-ba33-498c-8a28-989b5aa879a8,The pumping station shall be water tight and resistant to earth pressure and it may not cause odour problem.,{'ID': '129_Finnish_Health-WaterAndSewerage'},The <e1>pumping station</e1> shall be <e2>water tight</e2> and resistant to earth pressure and it may not cause odour problem.,necessity,annotated
+082c7ed9-3579-48c2-a0d2-076f1edd647c_10,,,"Each of the <e1>0.05</e1> <e2>total capital cost</e2> of the centrally hinged window should be assessed as a single side, bottom or top hung window.",equal,synthetic
+7d877df3-9aa7-4dff-a64d-5356a66c944d,"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a width exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",{'ID': '59_Finnish_SafetyOfUse'},"In public <e1>outdoor and indoor spaces</e1>, and in business and service premises, a <e2>handrail</e2> must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a width exceeding 2.4 metres and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",necessity,annotated
+3f7c10d1-d801-4351-bc85-187cf8cffeb3,The water vapour resistance and air tightness of external walls and their various layers as well as the structures attached to the external wall and joints to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,{'ID': '96_Finnish_Health-Humidity'},The water vapour resistance and air tightness of external walls and their various layers as well as the <e1>structures</e1> attached to the <e2>external</e2> wall and joints to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,none,annotated
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",{'ID': '75_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the <e1>total cost</e1> of the major <e2>renovation</e2> (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",part-of,annotated
+d925c189-860a-4fcb-ae88-d1cf8cc14fb8_5,,,"The <e1>illuminance</e1> of steps in covered or heated outdoor staircases must be no less than <e2>30% load</e2>, and the riser may be no more than 160 millimetres.",greater-equal,synthetic
+d54852df-8e3c-4e99-8484-31c403b78558,"If work is carried out on a system that includes a boiler, a boiler interlock should be installed.",{'ID': '256_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If work is carried out on a system that includes a <e1>boiler</e1>, a boiler interlock should be <e2>installed</e2>.",none,annotated
+977ccb7b-4580-4ea3-9ea4-5057925c9854,"NOTE: The surface area of the whole building must be included when assessing whether the works constitute a major renovation, even if the building is mixed use.",{'ID': '124_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"NOTE: The surface area of the whole building must be included when assessing whether the works constitute a major renovation, even if the <e1>building</e1> is <e2>mixed use</e2>.",selection,annotated
+2fad9e0f-fa0d-4a6b-9c63-152ef8828c4d_7,,,An upstand built on site should not exceed a <e1>gradient</e1> of <e2>0.15</e2>.,less-equal,synthetic
+7d552257-2212-4139-8d13-b982e0e7744f,"It would be beneficial if entrance doors to wheelchair-accessible bedrooms were powered opening, as this could avoid the need for the 300mm access space adjacent to the leading edge of the door.",{'ID': '143_UK_DocM_V2_AccessAndUseOfBuildings'},"It would be beneficial if entrance doors to wheelchair-accessible bedrooms were <e1>powered opening</e1>, as this could <e2>avoid the need for the 300mm access space adjacent to the leading edge of the door</e2>.",selection,annotated
+5b1fe636-d2aa-4382-885e-a4f8a2cae4d4,"Generally, a thermal element once upgraded should not have a U-value greater than 0.7W/(m2K).",{'ID': '125_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Generally, a thermal element once upgraded should not have a <e1>U-value</e1> greater than <e2>0.7W/(m2K)</e2>.",less-equal,annotated
+922bf8df-3a70-4f45-8c04-200b638d3b3c,The cold water pipe shall be designed and installed so that the temperature in the cold water system may not exceed 20 degrees Celsius.,{'ID': '59_Finnish_Health-WaterAndSewerage'},The <e1>cold water pipe</e1> shall be designed and installed so that the temperature in the cold water system may not exceed <e2>20 degrees Celsius</e2>.,none,annotated
+1fc9255c-929e-4052-aaec-e3ffede5a62e,"For large or complex projects, a commissioning manager should be appointed.",{'ID': '374_UK_DocM_V2_AccessAndUseOfBuildings'},"For large or complex <e1>projects</e1>, a <e2>commissioning manager</e2> should be appointed.",necessity,annotated
+389c960b-525d-4f2e-9a2c-1805eb2dc20d_3,,,The full <e1>free gap</e1> under a stair that forms part of the storage provision should be counted as <e2>60</e2>.,equal,synthetic
+0a7ff0c7-c5f9-4069-9d7e-2bfd6c4871d3_11,,,The <e1>sizes</e1> of the extension does not exceed <e2>65mm</e2>.,less-equal,synthetic
+2ef73ac0-d424-4e28-9782-3dbaf6e0a046,Attics and uppermost floor voids shall be divided into 400 m2 parts.,{'ID': '107_Finnish_FireSafety'},<e1>Attics</e1> and uppermost floor voids shall be <e2>divided into 400 m2 parts</e2>.,necessity,annotated
+84cd76d7-e5d0-4f39-94bc-0236c65d533a,"in residential buildings of not more than two storeys, one exit of no less than 900 millimetres in width is permitted.",{'ID': '217_Finnish_FireSafety'},"in residential buildings of not more than two storeys, one <e1>exit</e1> of no less than 900 millimetres in <e2>width</e2> is permitted.",part-of,annotated
+bfdf95da-d422-47cd-83d7-a30a4969f2e6_11,,,"If the internal ties must be centred on the supporting line, the minimum value of the <e1>axle group load</e1>, <e2>1m2</e2>, will also be applied to internal ties.",greater-equal,synthetic
+6d9a1e8e-6fe7-4234-951a-96fdc4598bd7_0,,,"If parking spaces are provided for a building, an adequate number of <e1>door or gate</e1>, but at least <e2>70 kN</e2>, shall be intended for the use of a person with mobility and functional impairment.",greater-equal,synthetic
+536b172d-ccd1-479a-8136-6ee05db0f264,"Where pipework is above ground, the performance of the pipe insulation should be at least as high as the insulating performance of pipework in the buried part of the system.",{'ID': '205_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where pipework is above ground, the performance of the pipe insulation should be at least as high as the <e1>insulating performance</e1> of <e2>pipework</e2> in the buried part of the system.",part-of,annotated
+fb1da22f-8ddb-4399-b441-64dca68da9af_7,,,"If a lift or other device for moving between levels is installed in the exit of an existing building, the dwellings exit may be no less than <e1>1,200 MJ/m2</e1> <e2>one side</e2>.",greater-equal,synthetic
+203faa23-7b71-47c9-a6e5-2333ac45389e,"The riser of the indoor steps of dwelling units and living quarters  may  be  no  more  than  190  millimetres,  and  the  tread  must  be  no  less  than  250 millimetres.",{'ID': '22_Finnish_SafetyOfUse'},"The riser of the indoor steps of dwelling units and living quarters may be no more than 190 millimetres, and the <e1>tread</e1> must be no less than <e2>250 millimetres</e2>.",greater-equal,annotated
+3121fe90-27db-405e-a42a-df3cd22ee176_8,,,"Where necessary, <e1>15mm</e1><e2>muntins</e2>, one above the other, must be installed in order to take into account children and users of wheelchairs.",equal,synthetic
+05864826-21ef-4ae7-9af8-2aaeffc7267a_8,,,Modular and portable buildings with a planned <e1>room temperature</e1> of more than <e2>0.055555556</e2> but with an intended time of use in a single location of less than two years should be shown to comply with the energy efficiency requirements.,greater,synthetic
+"8feaf7f2-dfd8-43ae-ab8d-791ee1ffd86c	However, if the elevation difference is no more than 1,000 millimetres, the ramp may not have a gradient of more than eight per cent.	{'ID': '9_Finnish_Accessibility'}_8",,,"However, if the <e1>axle group load</e1> is no more than <e2>65 degrees Celsius</e2>, the ramp may not have a gradient of more than eight per cent.",less-equal,synthetic
+f6add908-4d45-4b3e-83a6-369f6c36c037_5,,,"Door rails, stiles and muntins should be at least <e1>25 decibels</e1> <e2>edges</e2>.",greater-equal,synthetic
+20518e80-6f7e-457f-8c5a-59fa4c0eb324_2,,,"When calculating the heat loss for a buildings design solution, the <e1>surface area</e1> shall be used as the value of the <e2>domestic hot water circulation heat loss</e2> for the building envelope.",equal,synthetic
+b5addb77-be99-45a2-8dc0-fdf5d1969a57,Each column and wall shall be supplied with continuous vertical ties from the foundations to the roof level.,{'ID': '194_Finnish_StabilityOfStructures'},Each column and <e1>wall</e1> shall be supplied with continuous vertical <e2>ties</e2> from the foundations to the roof level.,necessity,annotated
+eefe1191-2903-4fb8-9138-6471e09fb67d_1,,,The <e1>U-value</e1> exceeds <e2>50</e2> at 11pm.,greater,synthetic
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3_1,,,"Where the cost of installing only cable routes is more than 7% of the total cost of the major <e1>secure doorset</e1>, there is no <e2>cavity</e2> to install either electric vehicle charge points or cable routes.",not-part-of,synthetic
+9dd2a0f1-0ff9-4416-8abd-1e6589980ff4_6,,,"If the <e1>energy efficiency</e1> of a mechanical ventilation systems air duct is designed to be greater than <e2>60</e2>, the outdoor air and exhaust air ducts shall be fitted with shutoff dampers that close automatically when the system shuts down.",greater,synthetic
+9fd15b82-fc32-4364-8724-f1ef14f0c047_11,,,The cooker hood should <e1>habitable area</e1> at least the <e2>exposure coefficient</e2> of the cooker.,greater-equal,synthetic
+75c60084-6878-472d-8694-e8739e0dd76c_11,,,"The width of access routes in assembly areas with a <e1>thresholds</e1> of <e2>1,500  millimetres</e2> must be at least 900 millimetres.",equal,synthetic
+8421f806-70f2-46a9-a308-90a40da3541d_1,,,"Where the <e1>air leakage rate figure</e1> of the approach, whether over its whole length or in part, is <e2>E 15</e2> or steeper, that part of the approach should be designed as ramped access.",greater-equal,synthetic
+11f2902d-29c2-474e-97d0-628a2a97a666_11,,,"<e1>maximum capacity</e1> of over <e2>50 m</e2> must be equipped with an appropriate safety barrier, railing or handrail.",greater,synthetic
+10e66a84-25db-40a0-87d5-6297d0732fe4,The shutoff valves shall be located: 1) at each house; 2) at each apartment; 3) in vertical service pipes; 4) on both sides of devices installed in the service pipes; 5) before a device or fixture that is connected to the connector pipe;  6) on both sides of the water meters.,{'ID': '93_Finnish_Health-WaterAndSewerage'},The shutoff valves shall be located: 1) at each house; 2) at each apartment; 3) in vertical service pipes; 4) on both sides of <e1>devices</e1> installed in the <e2>service pipes</e2>; 5) before a device or fixture that is connected to the connector pipe; 6) on both sides of the water meters.,part-of,annotated
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_0,,,"The wall ties should have a horizontal spacing of 900mm and a <e1>glare and reflections</e1> of <e2>0.35W/(m2K)</e2>, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",equal,synthetic
+0cafda73-ee3a-4a99-a224-2d142de63618,"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",{'ID': '238_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a <e1>wet</e1> heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the <e2>system</e2> including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",none,annotated
+8b7e8e7e-81dd-4a76-bdd3-8269ac00f74b,The system can be overridden by a door reactivating device that relies on appropriate electronic methods (but not a door edge pressure system); provided that the lift door remains fully open for at least three seconds.,{'ID': '24_UK_DocM_V1_AccessAndUseOfBuildings'},The <e1>system</e1> can be overridden by a door reactivating device that relies on appropriate electronic methods (but not a door edge pressure system); provided that the <e2>lift door</e2> remains fully open for at least three seconds.,part-of,annotated
+d925c189-860a-4fcb-ae88-d1cf8cc14fb8,"The tread of steps in covered or heated outdoor staircases must be no less than 300 millimetres, and the riser may be no more than 160 millimetres.",{'ID': '28_Finnish_SafetyOfUse'},"The tread of steps in covered or heated <e1>outdoor</e1> <e2>staircases</e2> must be no less than 300 millimetres, and the riser may be no more than 160 millimetres.",selection,annotated
+079db365-cfed-474e-9329-25349ac0db4a_3,,,"In connection with the door of an outside space of an individual dwelling the <e1>total flow rate</e1> outside the door may be more than <e2>adequate means</e2> if the level difference can, with reasonable effort, be eliminated with equipment in the outdoor space.",greater,synthetic
+e7be7432-5505-47ad-b586-2a2e3f5a1a37,"If the index terminal has to be set to a significantly closed position to achieve the required air flow rate, then the fan speed should be reduced and the terminals rebalanced.",{'ID': '203_UK_DocF_V1_Ventilation'},"If the <e1>index terminal</e1> has to be set to a significantly closed position to achieve the required air flow rate, then the fan <e2>speed</e2> should be reduced and the terminals rebalanced.",none,annotated
+e4fb8d18-8dbc-4351-a2df-d87f880f476a_7,,,The <e1>net absorber area</e1> for balconies is <e2>8.5m2</e2> that of the load-bearing structures of the storey.,equal,synthetic
+e43c1e88-be80-42d9-944e-1bf0f0f82479_4,,,Individual flights are: for <e1>Extract</e1> up to <e2>8.5m2</e2> not more than 10m long; for gradients up to 1:12 not more than 5m long.,less-equal,synthetic
+cf35d4a4-3170-421b-9be1-b68d928eed1d,"A roof with a pitch greater than 1:8 must be constructed making appropriate use of walkways, roof ladders, safety ladders, roof stairs, roof treads and foot rails.",{'ID': '125_Finnish_SafetyOfUse'},"A roof with a <e1>pitch</e1> greater than <e2>1:8</e2> must be constructed making appropriate use of walkways, roof ladders, safety ladders, roof stairs, roof treads and foot rails.",greater,annotated
+511c1a7f-08b9-48ec-aea6-9b749fdf31a1,"A non-residential building shall, considering the intended use and functional units of the building and distances in the building, have an adequate number of appropriately located toilet facilities which are suitable for users of wheelchairs and walking frames with wheels.",{'ID': '51_Finnish_Accessibility'},"A non-residential building shall, considering the intended use and functional units of the building and distances in the building, have an adequate number of <e1>appropriately located</e1> toilet facilities which are <e2>suitable for users of wheelchairs and walking frames with wheels</e2>.",none,annotated
+7d7d55f1-b28d-4ce8-aec6-dd4dc0786ce8_6,,,"For sizes of cylinder not listed, the <e1>dwelling unit</e1> from the cylinder should not exceed <e2>0.7</e2>, where V is the volume in litres.",less-equal,synthetic
+fc8ee55c-408d-48a9-ae4c-a6961b5745ce,Biomass heating supplemented by an alternative appliance (e.g. gas) - the CO2 emission factor and primary energy factor should be based on a weighted average for the two fuels.,{'ID': '59_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Biomass heating</e1> <e2>supplemented by an alternative appliance</e2> (e.g. gas) - the CO2 emission factor and primary energy factor should be based on a weighted average for the two fuels.,selection,annotated
+113b8bf8-1856-45f5-a54b-d65ef100b437_5,,,"If a gas-fired combination boiler is installed in an existing dwelling, at least <e1>twice the rise plus the going (2R G)</e1> of the following <e2>cold side</e2>, appropriate to the system, should be installed.",greater-equal,synthetic
+7f3f59a4-fc7e-4b14-8074-384f6cacf548_3,,,"The height of a barrier in a dwellings indoor areas may, however, be at least 0.9 metres if the <e1>distance</e1> is less than <e2>200 lux</e2>.",less,synthetic
+77f993c6-dff1-4f9a-8f66-73221d3cbaff_3,,,"If the dwelling only has <e1>2.2 metres</e1> <e2>electricity generation systems</e2>, a minimum ventilation rate of 13l/s should be used.",equal,synthetic
+11f2902d-29c2-474e-97d0-628a2a97a666_1,,,"<e1>high</e1> of over <e2>100</e2> must be equipped with an appropriate safety barrier, railing or handrail.",greater,synthetic
+a2f3a871-91d5-4777-95c9-4744792b3a69,"in an existing building, for the principal or main staff entrance or entrances to be accessible, an alternative accessible entrance should be provided.",{'ID': '61_UK_DocM_V2_AccessAndUseOfBuildings'},"in an existing building, for the principal or main staff <e1>entrance</e1> or entrances to be <e2>accessible</e2>, an alternative accessible entrance should be provided.",selection,annotated
+c5c5365f-273f-4c29-8491-4f50aabc3b78,"Manual controls for powered entrance doors should be clearly distinguishable against the background and not located so that a person, having used the control, needs to move to avoid contact with the door as it opens.",{'ID': '74_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Manual controls</e1> for powered entrance doors should be clearly distinguishable against the background and <e2>not located so that a person, having used the control, needs to move to avoid contact with the door as it opens</e2>.",necessity,annotated
+973c9430-2b4a-4ab4-82df-7060c3002f77_11,,,The <e1>axle group load</e1> for the community heating primary circuit should be a minimum of <e2>two persons per square metre</e2>.,greater-equal,synthetic
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab_2,,,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the <e1>fittings</e1> of that installation exceeds <e2>400 millimetres</e2> of the total cost of the major renovation.",greater,synthetic
+244aeb26-ba33-498c-8a28-989b5aa879a8,The pumping station shall be water tight and resistant to earth pressure and it may not cause odour problem.,{'ID': '129_Finnish_Health-WaterAndSewerage'},The <e1>pumping station</e1> shall be water tight and resistant to earth pressure and <e2>it</e2> may not cause odour problem.,none,annotated
+3121fe90-27db-405e-a42a-df3cd22ee176,"Where necessary, two handrails, one above the other, must be installed in order to take into account children and users of wheelchairs.",{'ID': '55_Finnish_SafetyOfUse'},"Where necessary, <e1>two </e1><e2>handrails</e2>, one above the other, must be installed in order to take into account children and users of wheelchairs.",equal,annotated
+fc8ee55c-408d-48a9-ae4c-a6961b5745ce,Biomass heating supplemented by an alternative appliance (e.g. gas) - the CO2 emission factor and primary energy factor should be based on a weighted average for the two fuels.,{'ID': '59_UK_DocM_V2_AccessAndUseOfBuildings'},Biomass heating supplemented by an alternative appliance (e.g. gas) - the CO2 emission factor and <e1>primary energy factor</e1> should be <e2>based on a weighted average for the two fuels</e2>.,necessity,annotated
+959b4ba1-2cf2-4ae9-84d4-055e9c0040f1,The inaccuracies of the crane wheels should be determined together with the crane supplier.,{'ID': '229_Finnish_StabilityOfStructures'},The <e1>inaccuracies</e1> of the crane <e2>wheels</e2> should be determined together with the crane supplier.,part-of,annotated
+f420ae57-5656-4558-b1a3-1079e46bf6cc_1,,,"In the case of the storey-level door of a dwelling, or if the <e1>power input from controls</e1> through the door exceeds <e2>two </e2>, doors must open in the direction of the exit.",greater,synthetic
+0da52584-1b37-48b5-840f-3795ae695275_6,,,"the minimum clear dimensions of the platform are: 1100mm wide and <e1>1,200 millimetres</e1> <e2>speed</e2> where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.",equal,synthetic
+710ef992-e187-4b1a-894b-e0e222f54359_10,,,"NOTE: For grid-supplied electricity, a <e1>feasibility of installing high-efficiency alternative systems</e1> of <e2>16/01/2023 00:00</e2> and primary energy factor of 1.501kWhPE/kWh should be used.",equal,synthetic
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_5,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for <e1>surface</e1> 1 and <e2>30m2</e2> if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",equal,synthetic
+bfdf95da-d422-47cd-83d7-a30a4969f2e6_3,,,"If the internal ties must be centred on the supporting line, the minimum value of the <e1>mechanical ventilation</e1>, <e2>1800mm</e2>, will also be applied to internal ties.",greater-equal,synthetic
+e43c1e88-be80-42d9-944e-1bf0f0f82479_10,,,Individual flights are: for gradients up to 1:15 not more than <e1>2 metres</e1> <e2>primary energy factor</e2>; for gradients up to 1:12 not more than 5m long.,less-equal,synthetic
+8fec1c4a-527e-49b6-9267-89ff700a9291,"Where membranes are penetrated, careful detailing should be used to achieve a robust and durable seal at these penetrations.",{'ID': '182_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where membranes are penetrated, careful <e1>detailing</e1> should be <e2>used to achieve a robust and durable seal at these penetrations</e2>.",necessity,annotated
+244aeb26-ba33-498c-8a28-989b5aa879a8,The pumping station shall be water tight and resistant to earth pressure and it may not cause odour problem.,{'ID': '129_Finnish_Health-WaterAndSewerage'},The <e1>pumping station</e1> shall be water tight and <e2>resistant to earth pressure</e2> and it may not cause odour problem.,necessity,annotated
+46f5be2a-1514-420b-bc39-331fc6e0d2df_1,,,"The dwelling primary energy rate, dwelling emission rate and <e1>fire resistance time</e1>, all calculated using the measured air permeability, must not be higher than the target primary energy rate, target emission rate and <e2>internal temperature</e2>, respectively.",less-equal,synthetic
+20216261-f56d-4f79-8a46-c781abe19f04,"For new and existing buildings other than dwellings, information should be provided in a new or existing building log book.",{'ID': '98_UK_DocF_V2_Ventilation'},"For new and existing buildings other than dwellings, <e1>information</e1> should be <e2>provided in a new or existing building log book</e2>.",necessity,annotated
+3ca5cb38-b90b-4449-ba14-4268866df8e1,The water heater is close to the draw-off points and has a storage capacity no greater than 100 litres.,{'ID': '463_UK_DocM_V2_AccessAndUseOfBuildings'},The water heater is close to the draw-off points and has a <e1>storage capacity</e1> no greater than <e2>100 litres</e2>.,less-equal,annotated
+efe27c3d-80a8-4999-9310-77160105fe37,"Instead, the building primary energy rate and building emission rate should be calculated as if the area covered by the pool were replaced with the equivalent area of floor with the same U-value as the pool surround.",{'ID': '91_UK_DocM_V2_AccessAndUseOfBuildings'},"Instead, the building primary energy rate and <e1>building emission rate</e1> should be <e2>calculated as if the area covered by the pool were replaced with the equivalent area of floor with the same U-value as the pool surround</e2>.",necessity,annotated
+28c47652-47a0-4fa4-8343-beee0af2691c,"Large  roof  surfaces  must  be  divided  into  parts  of  no  more  than  2,400 square  metres.",{'ID': '181_Finnish_FireSafety'},"<e1>Large</e1> roof <e2>surfaces</e2> must be divided into parts of no more than 2,400 square metres.",selection,annotated
+6a41a473-bd3c-4e38-a093-094b3fdae388,At least one in every five remaining parking spaces must be provided with cable routes.,{'ID': '68_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},At least <e1>one</e1> in every five remaining parking spaces must be <e2>provided with cable routes</e2>.,necessity,annotated
+a235c68f-ae44-4770-b005-4e9d7b659eb7_9,,,All cavity walls should have leaves at least 90mm thick and cavities at least <e1>20 millimetres</e1> <e2>ventilation rate</e2>.,greater-equal,synthetic
+e8340500-38b6-461b-b00d-d3aa44ac1f0b,The temperature of the water available from the hot water system may not exceed 65 degrees Celsius.,{'ID': '62_Finnish_Health-WaterAndSewerage'},The <e1>temperature</e1> of the water available from the hot water system may not exceed <e2>65 degrees Celsius</e2>.,less-equal,annotated
+01d924bf-4a69-4eb8-b05e-ce993aee3d45,Perimeter insulation should be continuous and have a minimum thickness of 25mm.,{'ID': '135_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Perimeter insulation</e1> should be continuous and have a minimum <e2>thickness</e2> of 25mm.,part-of,annotated
+451e7c91-d39f-4401-a0e3-5ab455ab0442,"The approach route should be level, gently sloping, or, where necessary, ramped.",{'ID': '15_UK_DocM_V1_AccessAndUseOfBuildings'},"The <e1>approach route</e1> should be <e2>level, gently sloping, or, where necessary, ramped</e2>.",necessity,annotated
+f6ea9be6-644d-4dc6-8954-d115bdd528c8,"The building emission rate and building primary energy rate submission should be accompanied by a report, signed by a suitably qualified person, detailing how the combined emission factor has been derived.",{'ID': '62_UK_DocM_V2_AccessAndUseOfBuildings'},"The building emission rate and building primary energy rate <e1>submission</e1> should be accompanied by a <e2>report</e2>, signed by a suitably qualified person, detailing how the combined emission factor has been derived.",necessity,annotated
+4fc3b5b1-a838-4429-b385-d8e80e6633eb_6,,,"In the absence of relevant harmonised European Standards, products with a <e1>cold side</e1> exceeding <e2>270 millimetres</e2> must have a product certificate issued by a Notified Body.",greater,synthetic
+588857f5-9281-4c32-8d83-c98230d5b934,The use of boards with lapped or tongue and groove edges should be considered.,{'ID': '146_UK_DocL_V1_ConsrvationOfFuelAndPower'},The use of boards with lapped or <e1>tongue and groove</e1> edges should be <e2>considered</e2>.,none,annotated
+203faa23-7b71-47c9-a6e5-2333ac45389e_11,,,"The <e1>air flow rates</e1> of the indoor steps of dwelling units and living quarters may be no more than <e2>0.05</e2>, and the tread must be no less than 250 millimetres.",less-equal,synthetic
+f3bd99b4-7ea5-4968-af10-3c133c0b5aa0_11,,,No individual flight has a <e1>pitch</e1> of more than <e2>5m</e2>.,less-equal,synthetic
+3931f0fa-433e-4fb8-96bf-a747f3622ee0,"In order to help people with visual impairment to appreciate the size of a space they have entered, or to find their way around, there should be a visual contrast between the wall and the ceiling, and between the wall and the floor.",{'ID': '97_UK_DocM_V2_AccessAndUseOfBuildings'},"In order to help people with visual impairment to appreciate the size of a space they have entered, or to find their way around, there should be a visual contrast <e1>between the wall and the ceiling</e1>, and <e2>between the wall and the floor</e2>.",none,annotated
+7d552257-2212-4139-8d13-b982e0e7744f,"It would be beneficial if entrance doors to wheelchair-accessible bedrooms were powered opening, as this could avoid the need for the 300mm access space adjacent to the leading edge of the door.",{'ID': '143_UK_DocM_V2_AccessAndUseOfBuildings'},"It would be beneficial if <e1>entrance doors</e1> to wheelchair-accessible bedrooms were powered opening, as this could <e2>avoid the need for the 300mm access space adjacent to the leading edge of the door</e2>.",none,annotated
+043258d7-d35e-42d9-87c5-b83565c39ad6,"Before elements are concealed by subsequent work, an onsite audit should be undertaken to confirm that the designed details have been constructed.",{'ID': '133_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Before elements are concealed by subsequent work, an onsite <e1>audit</e1> should be <e2>undertaken to confirm that the designed details have been constructed</e2>.",necessity,annotated
+0df5892a-e396-424e-90f1-74f6ccfb9e1a,"A certain proportion of the changing rooms, washing facilities, saunas and swimming pools in a non-residential building shall be suitable for a person with mobility and functional impairment.",{'ID': '61_Finnish_Accessibility'},"A <e1>certain proportion</e1> of the changing rooms, washing facilities, saunas and <e2>swimming pools</e2> in a non-residential building shall be suitable for a person with mobility and functional impairment.",part-of,annotated
+5b4380ba-0066-4735-a362-316d4c8e70b2_0,,,"Where a building undergoing major renovation, which is not a residential building or a mixeduse building, will have more than <e1>10m</e1> <e2>exit enclosure</e2> after the major renovation is completed (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.",greater,synthetic
+fb1da22f-8ddb-4399-b441-64dca68da9af,"If a lift or other device for moving between levels is installed in the exit of an existing building, the dwellings exit may be no less than 850 millimetres wide.",{'ID': '218_Finnish_FireSafety'},"If a lift or other device for moving between levels is installed in the <e1>exit</e1> of an existing <e2>building</e2>, the dwellings exit may be no less than 850 millimetres wide.",part-of,annotated
+956efc87-87de-4d3c-99fb-dc58eab9353b_0,,,A dwelling that is intended for sheltered housing or supported housing of a person with mobility or functional impairment shall have at least one toilet and washing facility which has a free space with a <e1>level differences</e1> of at least <e2>30% load</e2>.,greater-equal,synthetic
+0f67dad7-6df9-444b-8e72-f447668e3fde,"Where sanitary facilities are wheelchair accessible, WC pans should be a minimum of 400mm high.",{'ID': '104_UK_DocM_V1_AccessAndUseOfBuildings'},"Where sanitary facilities are wheelchair accessible, <e1>WC pans</e1> should be a minimum of 400mm <e2>high</e2>.",part-of,annotated
+9027959e-efc1-4d32-acbe-e0775d40f001_1,,,"The morticed bolts should have a minimum <e1>Capacities</e1> of <e2>65mm</e2>, should be at least 100mm from the top and bottom corners of the door, and should avoid any door construction joints.",greater-equal,synthetic
+09b2a395-5293-4b7d-82d4-5312482d59e9_2,,,"Door entry controls, where provided, are mounted <e1>one per 100m2</e1> <e2>ending</e2> finished ground level, and at least 300mm away from any projecting corner.",equal,synthetic
+05864826-21ef-4ae7-9af8-2aaeffc7267a_10,,,Modular and portable buildings with a planned <e1>ventilation rate</e1> of more than <e2>0.06 m2</e2> but with an intended time of use in a single location of less than two years should be shown to comply with the energy efficiency requirements.,greater,synthetic
+eeb4239f-3819-475c-ad20-756bed80c4ff_11,,,"In reference heat loss calculations, the value used as the <e1>power requirements</e1> of the buildings ventilation system shall be <e2>300 millimetres</e2>.",equal,synthetic
+12e545d1-64f4-45c9-a520-5b8a003eba0a_1,,,"If the dwelling has more than <e1>160 millimetres</e1> exposed <e2>floor-to-wall junctions</e2>, the area of background ventilators on each facade should be similar, to allow cross-ventilation.",greater,synthetic
+3ca5cb38-b90b-4449-ba14-4268866df8e1,The water heater is close to the draw-off points and has a storage capacity no greater than 100 litres.,{'ID': '463_UK_DocM_V2_AccessAndUseOfBuildings'},The <e1>water heater</e1> is <e2>close to the draw-off points</e2> and has a storage capacity no greater than 100 litres.,necessity,annotated
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_1,,,"In buildings more than 9 metres and at most <e1>0.9 metres</e1> in <e2>from the inside face of the wall</e2>, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",less-equal,synthetic
+6bf41e87-d7c1-42a5-bf0d-67c711a21753,"Additionally, a sign identifying the floor reached should be provided on each landing in a location that can be easily seen from the lifting device and is designed so that it contrasts visually with its surrounding.",{'ID': '105_UK_DocM_V2_AccessAndUseOfBuildings'},"Additionally, a <e1>sign</e1> identifying the floor reached should be provided on each landing in a location that can be easily seen from the lifting device and is <e2>designed</e2> so that it contrasts visually with its surrounding.",selection,annotated
+8364a5f1-f80e-484c-9f38-bffc6f4c1876_5,,,"Where communal parking is provided to blocks of flats, at least <e1>proportion</e1> standard <e2>water</e2> is provided close to the communal entrance of each core of the block (or to the lift core where the parking bay is internal).",greater-equal,synthetic
+656aa2fa-18cb-41ee-ae28-28deb3dffcc3,The water temperature of the water in the hot water system shall be at least 55 degrees Celsius and available from the hot water plumbing fixture within 20 seconds.,{'ID': '61_Finnish_Health-WaterAndSewerage'},The <e1>water temperature</e1> of the water in the hot water system shall be at least 55 degrees Celsius and <e2>available from the hot water plumbing fixture within 20 seconds</e2>.,necessity,annotated
+636bce88-fd3b-4e5a-9f6a-4aa0d3d1bfa4_1,,,"Where a new building contains more than <e1>0.7W/(m2K)</e1> <e2>ticket dispensing machines</e2>, a common access point for a gigabit-capable public electronic communications network is required as a part of the buildings gigabit-ready physical infrastructure.",greater,synthetic
+5ba5ffe7-ece8-488a-b461-da66237e7888,"All walls, ducts and boxings to the WC/cloakroom, bathroom and shower room should be strong enough to support grab rails, seats and other adaptations that could impose a load of up to 1.5kN/m2.",{'ID': '54_UK_DocM_V1_AccessAndUseOfBuildings'},"All walls, <e1>ducts</e1> and boxings to the <e2>WC/cloakroom</e2>, bathroom and shower room should be strong enough to support grab rails, seats and other adaptations that could impose a load of up to 1.5kN/m2.",part-of,annotated
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab_4,,,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the <e1>total minimum width</e1> of that installation exceeds <e2>EI 30</e2> of the total cost of the major renovation.",greater,synthetic
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_9,,,"If the air flows of <e1>equivalent area</e1> <e2>100</e2> and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+0262f6e5-21bc-4312-9388-8ac93b79416d_11,,,"The minimum full <e1>dwelling primary energy rate</e1> of the absorption chillers should be no worse than <e2>1,000 millimetres</e2>.",greater-equal,synthetic
+6414854d-01f9-481f-a7f4-c4581e48d8b1_9,,,Special safety features are not necessary if the <e1>facility</e1> is not more than <e2>800 millimetres</e2> long.,less-equal,synthetic
+38cd3221-7fc9-4462-be20-78b16a4309d3_7,,,The <e1>location</e1> of openings in the newly created dwelling should not be more than <e2>ten millimetres</e2> of the total floor area.,less-equal,synthetic
+825053cb-af5d-43a9-b59b-e2a5ae78ea73_5,,,The <e1>shallow projecting</e1> of associated parking spaces which have access to either: a. cable routes; b. an electric vehicle charge point should be the greater of the following: a. the number of dwellings in the residential building; b. the <e2>pressures</e2> of associated parking spaces.,greater,synthetic
+164122ed-c7ac-4cf8-8a54-3d56c144f78d,"In general, the findings indicate that there should be at least the same number of WCs (for women) as urinals (for men) and for some building types, e.g. large retail buildings, at least twice as many.",{'ID': '172_UK_DocM_V2_AccessAndUseOfBuildings'},"In general, the findings indicate that there should be at least the same number of WCs (for women) as urinals (for men) and for some <e1>building</e1> types, e.g. large retail buildings, <e2>at least twice as many</e2>.",necessity,annotated
+c952db0f-b605-4335-8d56-97fc339ad5ba_6,,,All <e1>200 millimetres</e1> <e2>day-care institutions</e2> of the installation and commissioning checklist should be completed.,equal,synthetic
+05864826-21ef-4ae7-9af8-2aaeffc7267a_11,,,Modular and portable buildings with a planned service life of more than two years but with an <e1>total capital cost</e1> in a single location of less than <e2>13l/s</e2> should be shown to comply with the energy efficiency requirements.,less,synthetic
+a86b58e8-046f-44b7-8e1b-00c876c8c647,"Parapets in categories A to E and panel parts of walls acting as parapets, as well as their fasteners, shall be designed to the concentrated load Qk = 0.3 kN acting on a random spot.",{'ID': '30_Finnish_StabilityOfStructures'},"Parapets in categories A to E and <e1>panel parts</e1> of walls <e2>acting as parapets</e2>, as well as their fasteners, shall be designed to the concentrated load Qk = 0.3 kN acting on a random spot.",selection,annotated
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3,"Where the cost of installing only cable routes is more than 7% of the total cost of the major renovation, there is no requirement to install either electric vehicle charge points or cable routes.",{'ID': '53_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where the cost of installing only cable routes is more than 7% of the <e1>total cost</e1> of the major <e2>renovation</e2>, there is no requirement to install either electric vehicle charge points or cable routes.",part-of,annotated
+eccd4f77-ef4a-41fd-a22a-620c84fdddd4,There is a minimum of 400mm of worktop to at least one side of the oven and fridge or fridge freezer where this is taller than the worktop height (or to one side of a pair of tall appliances where they are located together at the end of a run).,{'ID': '98_UK_DocM_V1_AccessAndUseOfBuildings'},There is a minimum of 400mm of worktop to at least one side of the oven and fridge or fridge freezer where this is taller than the worktop height (or to one side of a pair of tall <e1>appliances</e1> where they are <e2>located together at the end of a run</e2>).,selection,annotated
+3e9fc57e-bc69-4f17-a056-dd7767afa9bb_2,,,"If the <e1>surface area</e1> of the building does not exceed <e2>two years</e2>, access to the attic fire compartments from the outside shall be required.",less-equal,synthetic
+dd056285-1aa4-4c6d-94ac-b911458cb7ea,"Where any of the parking spaces for new buildings other than residential or mixed-use buildings are in a covered car park, the requirement to install an electric vehicle charge point should be met by installing a charge point in a parking space that is not within a covered car park.",{'ID': '70_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where any of the <e1>parking spaces</e1> for new buildings other than residential or mixed-use buildings are in a covered <e2>car park</e2>, the requirement to install an electric vehicle charge point should be met by installing a charge point in a parking space that is not within a covered car park.",part-of,annotated
+05fdde92-d8af-42ad-963b-9019c69a8ab3,"For a timber frame where the intermediate floor structure breaches the external wall insulation, further insulation of the same thickness as the insulation used in the external wall should be included within the depth of the intermediate floor structure.",{'ID': '163_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For a timber frame where the intermediate floor structure breaches the external wall insulation, further <e1>insulation</e1> of the same thickness as the insulation used in the external wall should be <e2>included within the depth of the intermediate floor structure</e2>.",necessity,annotated
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. <e1>showers</e1> and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. <e2>technical utility room</e2> with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",none,annotated
+d8066a73-49c2-4e99-825a-b49b9b2ba67d_7,,,A landing measuring at least <e1>1m2</e1> in <e2>atmosphere</e2> must be reserved in front of and behind a door located in an exit route.,greater-equal,synthetic
+2a256a9c-0b8a-4acf-87e1-86a5857f36a3_9,,,"Where a driveway forms all, or part of, the approach route, an <e1>behind  surfaces  exposed  to  running  water,  repetitious splash water or water condensation</e1> of at least <e2>100</e2> wide should be provided so that a wheelchair user can pass a parked car.",greater-equal,synthetic
+29ad081e-90f4-4eb0-9cea-a4f49beea768,Fans used for general air distribution that are rated at more than 1100W should be fitted with variable speed drives.,{'ID': '298_UK_DocM_V2_AccessAndUseOfBuildings'},Fans used for <e1>general</e1> air distribution <e2>that are rated at more than 1100W</e2> should be fitted with variable speed drives.,none,annotated
+9027959e-efc1-4d32-acbe-e0775d40f001,"The morticed bolts should have a minimum projection of 20mm, should be at least 100mm from the top and bottom corners of the door, and should avoid any door construction joints.",{'ID': '38_UK_DocQ_Security_Dwellings'},"The <e1>morticed bolts</e1> should have a minimum projection of 20mm, should be at least 100mm <e2>from the top and bottom corners of the door</e2>, and should avoid any door construction joints.",part-of,annotated
+d43e4877-601c-43eb-9d33-96945754374b,Good acoustic design should be employed to achieve an acoustic environment that is neither too reverberant nor too absorbent so that announcements and conversations can be heard clearly.,{'ID': '99_UK_DocM_V2_AccessAndUseOfBuildings'},Good acoustic design should be employed to achieve an acoustic environment <e1>that is neither too reverberant nor too absorbent</e1> <e2>so that announcements and conversations can be heard clearly</e2>.,selection,annotated
+371e1755-8bb5-456e-bf66-5a50f4c19d59,"Where there is full-height structural guarding, if you provide a second (lower) handrail, the vertical height from the pitch line of the steps (or the surface of the ramp) to the top of the second (lower) handrail should be 600mm.",{'ID': '50_UK_DocK_ProtectionFromFalling'},"Where there is full-height structural guarding, if you provide a <e1>second (lower)</e1> handrail, the vertical height <e2>from the pitch line of the steps (or the surface of the ramp) to the top of the second (lower) handrail</e2> should be 600mm.",none,annotated
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9_0,,,"In buildings more than 9 metres and at most <e1>190 kN</e1> in <e2>anthracite figure</e2>, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",less-equal,synthetic
+33ed3038-99a6-4b2d-906a-a1db21f2d898,"For heating systems in new dwellings, or when a heat generator such as a boiler is replaced in an existing dwelling, each room should be provided with thermostatic room controls.",{'ID': '250_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For <e1>heating systems</e1> in new dwellings, or when a heat generator such as a boiler is replaced in an existing dwelling, each room should be provided with <e2>thermostatic room controls</e2>.",none,annotated
+4e1bda84-398f-4bae-a335-2c7f24501b09,The water heater is situated centrally with a distribution system to supply water to the drawoff points and has a capacity greater than 300 litres.,{'ID': '456_UK_DocM_V2_AccessAndUseOfBuildings'},The <e1>water heater</e1> is situated centrally with a distribution system to supply water to the drawoff points and has a <e2>capacity</e2> greater than 300 litres.,part-of,annotated
+67657794-a272-4ab2-9b19-df29e9d24844,Ground floors and external walls: the wall-to-floor junctions should be detailed to achieve continuity of insulation.,{'ID': '160_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Ground floors</e1> and external walls: the <e2>wall-to-floor junctions</e2> should be detailed to achieve continuity of insulation.,part-of,annotated
+fb5d3054-4911-4049-ba09-1c3e80f9c07c_9,,,"The tread of steps in uncovered or unheated outdoor staircases must be no less than 390 millimetres, and the <e1>boiler type</e1> may be no more than <e2>1.501kWhPE/kWh</e2>.",less-equal,synthetic
+c952db0f-b605-4335-8d56-97fc339ad5ba_3,,,All <e1>0.9 metres</e1> <e2>Humus soil</e2> of the installation and commissioning checklist should be completed.,equal,synthetic
+a1f91cfd-21f8-49a4-8468-746f49f4848e_9,,,"For a building that contains more than <e1>9 metres</e1> <e2>emergency repairs</e2> for example a block of flats or a terrace of houses an average target primary energy rate, target emission rate and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",greater,synthetic
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_7,,,Skirtings totalling up to 50mm total thickness and shallow projecting ducts or <e1>materials</e1> above <e2>2m</e2> may be discounted when measuring clear width.,greater,synthetic
+984c252b-74f4-4d85-9080-1c8ae1851eca_4,,,"If performance requires thicker glass to be used, an equivalent window unit with <e1>product certificate</e1> (<e2>01:08:00</e2>) glazing should be shown to meet the required standard.",equal,synthetic
+d988e207-c3f9-4314-9a16-f99b334595f4_6,,,"The <e1>one-hour  A-weighted  equivalent continuous sound level of impulsive, narrow-band or low-frequency noise</e1> must be no less than <e2>25mm</e2>.",greater-equal,synthetic
+f3c5d35c-ad38-46d6-8a75-1a331555b89e,The index terminal flow rate should be set with the terminal fully open and all other terminals should be adjusted to achieve the required flow rates at each terminal.,{'ID': '206_UK_DocF_V1_Ventilation'},The index terminal <e1>flow rate</e1> should be <e2>set with the terminal fully open</e2> and all other terminals should be adjusted to achieve the required flow rates at each terminal.,necessity,annotated
+0cafda73-ee3a-4a99-a224-2d142de63618,"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be sized to allow the space heating system to operate effectively and in a manner that meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower.",{'ID': '238_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where a wet heating system is either: a. newly installed b. fully replaced in an existing building, including the heating appliance, emitters and associated pipework all parts of the system including pipework and emitters should be <e1>sized</e1> to allow the space heating system to operate effectively and in a manner that <e2>meets the heating needs of the dwelling, at a maximum flow temperature of 55C or lower</e2>.",selection,annotated
+7f696221-52c9-4c52-8f90-74bd93c51299_8,,,This grippable handrail is 850-1000mm above the pitch line of the flight and <e1>Capacities</e1> at least <e2>250 millimetres</e2> beyond the top and bottom nosings.,greater-equal,synthetic
+06c2e0f7-69c8-47ec-bf31-9902ae9df7cf,"Provision shall be made for any windows, skylights, or any transparent or translucent walls, ceilings or roofs to be safely accessible for cleaning.",{'ID': '109_UK_DocK_ProtectionFromFalling'},"<e1>Provision</e1> shall be <e2>made</e2> for any windows, skylights, or any transparent or translucent walls, ceilings or roofs to be safely accessible for cleaning.",necessity,annotated
+f06f7ec1-3b83-4e1a-a421-b09589f2374c,"Provision shall be made to prevent any door or gate: (a) which slides or opens upwards, from falling onto any person; and (b) which is powered, from trapping any person.",{'ID': '114_UK_DocK_ProtectionFromFalling'},"Provision shall be made to prevent any door or gate: (a) which slides or opens upwards, from falling onto any person; and (b) <e1>which is powered</e1>, <e2>from trapping any person</e2>.",selection,annotated
+df09194e-2fe6-4007-b6c1-1a7383f1baba,"Generally, gradients within the approach should be as gentle as possible.",{'ID': '40_UK_DocM_V2_AccessAndUseOfBuildings'},"Generally, <e1>gradients</e1> within the approach should be <e2>as gentle as possible</e2>.",necessity,annotated
+2fad9e0f-fa0d-4a6b-9c63-152ef8828c4d,An upstand built on site should not exceed a U-value of 0.35W/(m2K).,{'ID': '115_UK_DocL_V1_ConsrvationOfFuelAndPower'},An upstand built on site should not exceed a <e1>U-value</e1> of <e2>0.35W/(m2K)</e2>.,less-equal,annotated
+8151be81-09ad-4dac-b2d2-f0d757915b6c_11,,,"However, when the snow load can occur, the <e1>air flow</e1> of the load s should be at least <e2>E</e2>.",greater-equal,synthetic
+f7f1a609-ae35-4544-9b38-e471d7a00666,"In order to enhance the efficiency of firefighting and rescue operations, means of smoke extraction shall be designed and constructed in the building so that smoke can be extracted from the different premises in the building.",{'ID': '249_Finnish_FireSafety'},"In order <e1>to enhance</e1> the <e2>efficiency</e2> of firefighting and rescue operations, means of smoke extraction shall be designed and constructed in the building so that smoke can be extracted from the different premises in the building.",selection,annotated
+aec934d9-6175-4624-9e8d-1ee6f71fb49d,Sufficient information about the overheating mitigation strategy and its maintenance requirements must be given to owners so that it can be used effectively.,{'ID': '92_UK_DocO_Overheating'},Sufficient <e1>information</e1> <e2>about the overheating mitigation strategy and its maintenance requirements</e2> must be given to owners so that it can be used effectively.,selection,annotated
+0da52584-1b37-48b5-840f-3795ae695275_3,,,the minimum clear dimensions of the platform are: 1100mm wide and <e1>0.3</e1> <e2>average carbon monoxide concentration</e2> where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+5577528f-8fa0-4ca3-96f6-ea418091cb86_5,,,The side edges of stairs and landings must be fitted with a raised camber to prevent slipping over the edge if a cube measuring more than <e1>55</e1> in <e2>heat exchanger area</e2> is able to pass through the opening between the plane level and the handrail or wall.,greater,synthetic
+8aa4b706-1659-4e30-a4fe-e7f33efe3241_11,,,All <e1>25 decibels</e1> <e2>notice</e2> of the compliance checklist should be completed.,equal,synthetic
+5ed671ca-0cd0-47e2-ad68-1d910e5ddbdf,The access route in the seating area or standing auditorium must be directly accessible from the end of each row.,{'ID': '114_Finnish_SafetyOfUse'},The <e1>access route</e1> in the seating area or standing auditorium must be <e2>directly accessible from the end of each row</e2>.,necessity,annotated
+86831830-e7f0-4b90-aa27-dc0542b7ba4d_4,,,"If a residential block of flats does not have a lift, the stairs between floor levels must have natural light and at least <e1>190 kN</e1> <e2>construction</e2>.",greater-equal,synthetic
+ffbc85cb-4301-4bcb-9a56-7487c95cf16d,Only the proportion of openings which can be opened with a very low risk of occupants falling from height should be considered to form part of the overheating mitigation strategy.,{'ID': '83_UK_DocO_Overheating'},Only the <e1>proportion</e1> of openings which can be opened with a very low risk of occupants falling from height should be <e2>considered to form part of the overheating mitigation strategy</e2>.,necessity,annotated
+4e4fdf56-c45b-4d89-b18f-7a2f24a41ba9_7,,,"In spaces intended for more than 60 persons, the <e1>level differences</e1> of the access route must be at least <e2>one per 100m2</e2>.",greater-equal,synthetic
+ef561e39-db90-462c-8dde-15fbeae954e5_0,,,A cube with <e1>intermediate landing</e1> of no more than <e2>1</e2> may pass between the upper edge of the barrier and the protective part.,less-equal,synthetic
+3c0a8ccb-d813-40fb-b69b-88250d3bc4ec_8,,,These fittings should not exceed a <e1>stairs</e1> of <e2>2.0 m3/(h m2)</e2>.,less-equal,synthetic
+3e9fc57e-bc69-4f17-a056-dd7767afa9bb,"If the height of the building does not exceed 28 metres, access to the attic fire compartments from the outside shall be required.",{'ID': '241_Finnish_FireSafety'},"If the height of the building does not exceed 28 metres, <e1>access</e1> to the attic fire compartments <e2>from the outside</e2> shall be required.",selection,annotated
+164122ed-c7ac-4cf8-8a54-3d56c144f78d,"In general, the findings indicate that there should be at least the same number of WCs (for women) as urinals (for men) and for some building types, e.g. large retail buildings, at least twice as many.",{'ID': '172_UK_DocM_V2_AccessAndUseOfBuildings'},"In general, the findings indicate that there should be at least the same <e1>number</e1> of <e2>WCs (for women)</e2> as urinals (for men) and for some building types, e.g. large retail buildings, at least twice as many.",selection,annotated
+c5c5365f-273f-4c29-8491-4f50aabc3b78,"Manual controls for powered entrance doors should be clearly distinguishable against the background and not located so that a person, having used the control, needs to move to avoid contact with the door as it opens.",{'ID': '74_UK_DocM_V2_AccessAndUseOfBuildings'},"Manual controls for powered <e1>entrance doors</e1> should be clearly distinguishable against the background and <e2>not located so that a person, having used the control, needs to move to avoid contact with the door as it opens</e2>.",none,annotated
+caa5332f-5180-4d07-a41f-e6e0e044a8c1,An existing district heat network that is being connected to a new dwelling should not have a CO2 emission factor for delivered heat to the dwelling which is greater than 0.350kgCO2/kWh.,{'ID': '287_UK_DocL_V1_ConsrvationOfFuelAndPower'},An existing <e1>district heat network</e1> that is <e2>being connected to a new dwelling</e2> should not have a CO2 emission factor for delivered heat to the dwelling which is greater than 0.350kgCO2/kWh.,selection,annotated
+c7035b48-7244-40a9-a70e-1d244caf72ac,"The same approved calculation tool must be used to calculate the target primary energy rate, target emission rate and target fabric energy efficiency rate and the dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate.",{'ID': '56_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The same approved calculation tool must be used to calculate the <e1>target primary energy rate</e1>, target emission rate and target fabric energy efficiency rate and the dwelling primary energy rate, dwelling emission rate and <e2>dwelling fabric energy efficiency rate</e2>.",none,annotated
+78d904cd-b605-43a6-b3a4-34c22f557123,"Instead, the dwelling primary energy rate, dwelling emission rate and dwelling fabric energy efficiency rate should be calculated as if the area covered by the pool were replaced with the equivalent area of floor with the same U-value as the pool surround.",{'ID': '84_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Instead, the dwelling primary energy rate, dwelling emission rate and <e1>dwelling fabric energy efficiency rate</e1> should be <e2>calculated</e2> as if the area covered by the pool were replaced with the equivalent area of floor with the same U-value as the pool surround.",necessity,annotated
+5577528f-8fa0-4ca3-96f6-ea418091cb86_4,,,The side edges of stairs and landings must be fitted with a raised camber to prevent slipping over the edge if a cube measuring more than <e1>half a metre</e1> in <e2>heat</e2> is able to pass through the opening between the plane level and the handrail or wall.,greater,synthetic
+8fec1c4a-527e-49b6-9267-89ff700a9291,"Where membranes are penetrated, careful detailing should be used to achieve a robust and durable seal at these penetrations.",{'ID': '182_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where membranes are <e1>penetrated</e1>, <e2>careful</e2> detailing should be used to achieve a robust and durable seal at these penetrations.",none,annotated
+0a53e4af-84a7-46aa-b28a-cb1d873c8cae,"The type and quality of public address, hearing enhancement and telephone systems should be chosen carefully to ensure intelligibility.",{'ID': '151_UK_DocM_V2_AccessAndUseOfBuildings'},"The <e1>type and quality</e1> of <e2>public address</e2>, hearing enhancement and telephone systems should be chosen carefully to ensure intelligibility.",selection,annotated
+4f2b56cb-9852-4406-bbea-31f426fb4910,"replacing a heating system including the heating appliance, pipework and heat emitters), the energy performance of the whole system should be assessed, and the results documented and handed over to the building owner with the manufacturers supporting literature.",{'ID': '397_UK_DocM_V2_AccessAndUseOfBuildings'},"replacing a heating system including the <e1>heating appliance</e1>, <e2>pipework</e2> and heat emitters), the energy performance of the whole system should be assessed, and the results documented and handed over to the building owner with the manufacturers supporting literature.",none,annotated
+419892bb-5044-4c63-a8ba-7747ad52c23d,"When installing windows, roof windows, rooflights or doors (all of which are controlled fittings), the controlled fitting should be well fitted and reasonably draught-proof.",{'ID': '195_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When installing windows, <e1>roof windows</e1>, rooflights or doors (all of which are controlled fittings), the <e2>controlled fitting</e2> should be well fitted and reasonably draught-proof.",none,annotated
+72e7ed0c-9e73-46b2-a919-20f3fea337fd,"An area with a potentially flammable or explosive atmosphere must not be located in a building where there are dwellings, accommodation premises, institutions or assembly and business premises.",{'ID': '56_Finnish_FireSafety'},"An area with a <e1>potentially flammable</e1> or explosive <e2>atmosphere</e2> must not be located in a building where there are dwellings, accommodation premises, institutions or assembly and business premises.",selection,annotated
+74b9ee2c-0192-442d-b5a1-a2974d456429,"The dwelling is wheelchair adaptable such that key parts of the accommodation, including sanitary facilities and kitchens, could be easily altered to meet the needs of a wheelchair user or, where required by a local planning authority, the dwelling is wheelchair accessible.",{'ID': '67_UK_DocM_V1_AccessAndUseOfBuildings'},"The <e1>dwelling</e1> is <e2>wheelchair adaptable</e2> such that key parts of the accommodation, including sanitary facilities and kitchens, could be easily altered to meet the needs of a wheelchair user or, where required by a local planning authority, the dwelling is wheelchair accessible.",selection,annotated
+f420ae57-5656-4558-b1a3-1079e46bf6cc_2,,,"In the case of the storey-level door of a dwelling, or if the <e1>intended purpose</e1> through the door exceeds <e2>35 mg/m3 (30 ppm)</e2>, doors must open in the direction of the exit.",greater,synthetic
+a5e9c36f-358f-4375-943c-6d5b89c82647,"Any abrupt level differences of over 0.7 metres and any precipices located in the vicinity of common play and recreation areas associated with buildings with more than two dwellings must be indicated by appropriate barriers or suitable planted areas, or outfitted with a base that cushions any fall.",{'ID': '92_Finnish_SafetyOfUse'},"Any abrupt level differences of over 0.7 metres and any precipices located in the vicinity of common play and recreation areas associated with buildings with more than two dwellings must be <e1>indicated by appropriate barriers or suitable planted areas</e1>, or <e2>outfitted with a base that cushions any fall</e2>.",none,annotated
+203faa23-7b71-47c9-a6e5-2333ac45389e,"The riser of the indoor steps of dwelling units and living quarters  may  be  no  more  than  190  millimetres,  and  the  tread  must  be  no  less  than  250 millimetres.",{'ID': '22_Finnish_SafetyOfUse'},"The <e1>riser</e1> of the indoor steps of dwelling units and living quarters may be no more than 190 millimetres, and the tread must be no less than <e2>250 millimetres</e2>.",none,annotated
+0aaf71f0-a482-4a72-a407-0d6db79c7f6f,"In a building consisting primarily of one storey, no more than 200 m2 of fire-compartmented and no more than 50 m2 of non-fire-compartmented areas that essentially relate to the business of the building may be located on the level of second storey.",{'ID': '69_Finnish_FireSafety'},"In a building consisting primarily of one storey, no more than 200 m2 of <e1>fire-compartmented</e1> and no more than 50 m2 of non-fire-compartmented <e2>areas</e2> that essentially relate to the business of the building may be located on the level of second storey.",selection,annotated
+793cb939-b3d9-46eb-ae65-71a4d5c8031b_10,,,Where the <e1>restaurant</e1> is within the private curtilage of the dwelling (but not within a carport or <e2>Structures</e2>) at least one space is a standard parking bay that can be widened to 3.3m.,not-part-of,synthetic
+d0927095-9e43-4ce4-a740-d5df69dc1dc3,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",{'ID': '84_Finnish_Health-IndoorClimateAndVentilation'},"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than <e1>10</e1> of the combined <e2>air flow</e2>, the combined air flow is classified under category 2.",part-of,annotated
+2238d6ef-421b-4f84-b24d-d46c6ba2afc5,"For example, when a door is open, people with impaired sight should be able to identify the door opening within the wall, as well as the leading edge of the door.",{'ID': '92_UK_DocM_V2_AccessAndUseOfBuildings'},"For example, when a <e1>door</e1> <e2>is open</e2>, people with impaired sight should be able to identify the door opening within the wall, as well as the leading edge of the door.",selection,annotated
+46f5be2a-1514-420b-bc39-331fc6e0d2df_6,,,"The dwelling primary energy rate, dwelling emission rate and <e1>layers</e1>, all calculated using the measured air permeability, must not be higher than the target primary energy rate, target emission rate and <e2>target primary energy rate</e2>, respectively.",less-equal,synthetic
+d988e207-c3f9-4314-9a16-f99b334595f4_7,,,The <e1>maximum number of occupants</e1> must be no less than <e2>200 m2</e2>.,greater-equal,synthetic
+10b2bf58-18df-46ee-a766-ed11eec6f42b,"Humus soil, organic substances decomposing or rotting from moisture or building waste must not be left under new buildings, in their crawl spaces and in their gravel backfills functioning as a drainage layer.",{'ID': '45_Finnish_Health-Humidity'},"Humus soil, organic substances <e1>decomposing or rotting from moisture</e1> or building <e2>waste</e2> must not be left under new buildings, in their crawl spaces and in their gravel backfills functioning as a drainage layer.",none,annotated
+328fb8e7-cae4-4465-b7a7-24f0d066d65a,"The results of all pressure tests on buildings, including any test failures, should be reported to the building control body.",{'ID': '360_UK_DocM_V2_AccessAndUseOfBuildings'},"The results of all <e1>pressure tests</e1> on <e2>buildings</e2>, including any test failures, should be reported to the building control body.",part-of,annotated
+d3fc8c9b-c23a-4188-8723-369caa90453c_10,,,"The <e1>indoor and outdoor conditions</e1> for a building's total combined window area is <e2>500 millimetres</e2> of the sum total of the floor plate areas of the buildings storeys that are fully or in part above the ground but, however, at most 50 of the building's facade area.",equal,synthetic
+bb9ec292-062b-43c3-8590-856dd5f6b890_10,,,"The building primary energy rate and <e1>sections</e1> calculated using the measured air permeability must not be higher than the target primary energy rate and <e2>topography</e2>, respectively.",less-equal,synthetic
+339fc78c-a2f2-481c-a410-3aeb41e24b8a,Solid walls constructed of coursed brickwork or blockwork should be at least as thick as 1/16 of the storey height.,{'ID': '32_UK_DocA_Structure'},<e1>Solid walls</e1> <e2>constructed of coursed brickwork or blockwork</e2> should be at least as thick as 1/16 of the storey height.,selection,annotated
+f41fb8da-16bd-4404-accb-e32727f3736a,"Windows, glass walls and glass doors into which there is a danger of collision must be marked in such a way that they can be easily noticed.",{'ID': '69_Finnish_SafetyOfUse'},"Windows, glass <e1>walls</e1> and glass doors into which there is a <e2>danger of collision</e2> must be marked in such a way that they can be easily noticed.",selection,annotated
+c0a6d35c-cc20-428b-941d-c3e3e6365c74_5,,,"In a tier that is uninterrupted by cross-gangways, and where the pitch exceeds 25, use a <e1>undertaken on a mixed-use building</e1> number of steps of <e2>25mm</e2>.",equal,synthetic
+a235c68f-ae44-4770-b005-4e9d7b659eb7,All cavity walls should have leaves at least 90mm thick and cavities at least 50mm wide.,{'ID': '35_UK_DocA_Structure'},All cavity walls should have <e1>leaves</e1> at least 90mm <e2>thick</e2> and cavities at least 50mm wide.,part-of,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_11,,,"If the air flows of <e1>use</e1> 1 and <e2>adequate means</e2> are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+f27a8dbb-737a-410e-9470-fba4193c0b4f,"Air pressure tests should be performed following the guidance in the approved airtightness testing methodology, CIBSEs TM23.",{'ID': '362_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Air pressure tests</e1> should be <e2>performed following the guidance in the approved airtightness testing methodology, CIBSEs TM23</e2>.",necessity,annotated
+df24d65a-425f-4ddd-b3aa-0ae34be4b0c1,Beading should be mechanically fixed and glued in position.,{'ID': '32_UK_DocQ_Security_Dwellings'},<e1>Beading</e1> should be mechanically fixed and <e2>glued in position</e2>.,necessity,annotated
+63af9f99-6939-4e8c-a6a9-8b10942e1597,"The handle to at least one window in the principal living area is located between 450mm and 1200mm above floor level, unless the window is fitted with a remote opening device that is within this height range.",{'ID': '57_UK_DocM_V1_AccessAndUseOfBuildings'},"The handle to at least one <e1>window</e1> in the <e2>principal living area</e2> is located between 450mm and 1200mm above floor level, unless the window is fitted with a remote opening device that is within this height range.",part-of,annotated
+77be05f2-cd8c-4d35-85e4-6637b999d8e7_5,,,The <e1>number of wall ties per square metre</e1> of the consequential improvement works should not be less than <e2>16/01/2023 00:00</e2> of the value of the principal works.,greater-equal,synthetic
+203faa23-7b71-47c9-a6e5-2333ac45389e_9,,,"The riser of the indoor steps of dwelling units and living quarters may be no more than 190 millimetres, and the <e1>feasibility of installing high-efficiency alternative systems</e1> must be no less than <e2>1,500 millimetres</e2>.",greater-equal,synthetic
+8cef7dc5-2d76-4dd8-80c5-6861b11a8f6f_11,,,"Where the work concerns a building containing more than <e1>20 points</e1> <e2>lead boiler</e2>, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",greater,synthetic
+8207751f-13b8-4fe3-9bfe-4423093d4905_9,,,A building with dwellings or accommodation or patient rooms shall be designed and implemented so that the <e1>design flow rate</e1> of the staircase and exit route is no more than <e2>one per 100m2</e2>.,less-equal,synthetic
+e43c1e88-be80-42d9-944e-1bf0f0f82479_9,,,Individual flights are: for <e1>U-value</e1> up to <e2>two</e2> not more than 10m long; for gradients up to 1:12 not more than 5m long.,less-equal,synthetic
+f420ae57-5656-4558-b1a3-1079e46bf6cc_7,,,"In the case of the storey-level door of a dwelling, or if the <e1>dimensions</e1> through the door exceeds <e2>14 metres</e2>, doors must open in the direction of the exit.",greater,synthetic
+9952f64d-e0df-4b03-84af-150782f81387_3,,,"For mobility-impaired people, a <e1>onsite electricity generation and storage</e1> of at least <e2>150m2</e2> is preferred.",greater-equal,synthetic
+a4fccc69-c508-4405-92aa-2cfe36bfca39,Exits of parts of the building separated by a fire wall must be constructed separately so that in the event of a fire there is no need to use any door that may be in the fire wall.,{'ID': '209_Finnish_FireSafety'},Exits of parts of the <e1>building</e1> separated by a fire wall must be <e2>constructed separately so that in the event of a fire there is no need to use any door that may be in the fire wall</e2>.,none,annotated
+bb9ec292-062b-43c3-8590-856dd5f6b890_7,,,"The building primary energy rate and <e1>agreed level of provision</e1> calculated using the measured air permeability must not be higher than the target primary energy rate and <e2>sales counter</e2>, respectively.",less-equal,synthetic
+7f696221-52c9-4c52-8f90-74bd93c51299,This grippable handrail is 850-1000mm above the pitch line of the flight and extends at least 300mm beyond the top and bottom nosings.,{'ID': '73_UK_DocM_V1_AccessAndUseOfBuildings'},This <e1>grippable handrail</e1> is <e2>850-1000mm</e2> above the pitch line of the flight and extends at least 300mm beyond the top and bottom nosings.,selection,annotated
+9fee4426-8d7f-40f9-bc6f-562a5d3fd9b4,"For roofs insulated at ceiling level, the long-term protection of the insulation layer should be considered: boarded areas should be provided above the insulation to give access for maintenance.",{'ID': '144_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For <e1>roofs</e1> <e2>insulated at ceiling level</e2>, the long-term protection of the insulation layer should be considered: boarded areas should be provided above the insulation to give access for maintenance.",selection,annotated
+4e8c5c50-44af-48f6-b959-e6f9b31afa1e,"If the planned time of use of a modular or portable building in a single location is less than two years, the only practical heating technology may be electric resistance heating.",{'ID': '89_UK_DocM_V2_AccessAndUseOfBuildings'},"If the <e1>planned time of use</e1> of a modular or portable <e2>building</e2> in a single location is less than two years, the only practical heating technology may be electric resistance heating.",part-of,annotated
+e7be7432-5505-47ad-b586-2a2e3f5a1a37,"If the index terminal has to be set to a significantly closed position to achieve the required air flow rate, then the fan speed should be reduced and the terminals rebalanced.",{'ID': '203_UK_DocF_V1_Ventilation'},"If the index terminal has to be <e1>set to a significantly closed position to achieve the required air flow rate</e1>, then the fan <e2>speed</e2> should be reduced and the terminals rebalanced.",none,annotated
+d796dece-45f6-4527-a151-c59b007e9028,"A safe and marked access route must be reserved for pedestrians in connection with vehicle traffic and goods transport routes, doors and gates in the yards of buildings other than single-family houses, if pedestrian traffic through them is necessary.",{'ID': '132_Finnish_SafetyOfUse'},"A safe and marked <e1>access route</e1> must be reserved for pedestrians in connection with vehicle traffic and goods transport routes, doors and gates in the yards of buildings other than single-family houses, if pedestrian traffic through them is <e2>necessary</e2>.",none,annotated
+457ecdc0-8247-4ad4-9beb-3b7a31cfa0fd,"All public areas, including lavatory accommodation, public telephones and external terraces should be accessible.",{'ID': '138_UK_DocM_V2_AccessAndUseOfBuildings'},"All public areas, including <e1>lavatory</e1> <e2>accommodation</e2>, public telephones and external terraces should be accessible.",selection,annotated
+6ab07828-b6aa-4a60-8860-333f061a0fde,"Door furniture on manually operated non-powered doors should be easy to operate by people with limited manual dexterity, and be readily apparent against the background of the door.",{'ID': '71_UK_DocM_V2_AccessAndUseOfBuildings'},"Door furniture on <e1>manually operated non-powered</e1> <e2>doors</e2> should be easy to operate by people with limited manual dexterity, and be readily apparent against the background of the door.",selection,annotated
+244aeb26-ba33-498c-8a28-989b5aa879a8,The pumping station shall be water tight and resistant to earth pressure and it may not cause odour problem.,{'ID': '129_Finnish_Health-WaterAndSewerage'},The pumping station shall be <e1>water tight</e1> and resistant to earth pressure and it may <e2>not cause odour problem</e2>.,none,annotated
+2afa8bba-b5ad-4e12-bc27-4beea3fd09b2_2,,,The normal relationship between the dimensions of the rise and going is: <e1>40</e1> equals <e2>450mm</e2>.,equal,synthetic
+5577528f-8fa0-4ca3-96f6-ea418091cb86_11,,,The side edges of stairs and landings must be fitted with a raised camber to prevent slipping over the edge if a cube measuring more than <e1>55 degrees Celsius</e1> in <e2>specification</e2> is able to pass through the opening between the plane level and the handrail or wall.,greater,synthetic
+b47066e6-d145-4427-91c0-8763c5ea92c5,Remedial work should be carried out to achieve satisfactory performance in retests.,{'ID': '387_UK_DocM_V2_AccessAndUseOfBuildings'},Remedial work should be <e1>carried out</e1> to <e2>achieve satisfactory performance in retests</e2>.,selection,annotated
+f733b7c9-a406-4f5a-b383-9d3f8b70a559,The selection of relevant critical situations for design should be made reflecting the conditions that can reasonably be foreseen during future use.,{'ID': '5_UK_DocA_Structure'},The selection of <e1>relevant</e1> critical <e2>situations</e2> for design should be made reflecting the conditions that can reasonably be foreseen during future use.,selection,annotated
+a9c88566-e4e5-4cba-8165-9916820d9cc5,"Doors, gates and boom barriers must operate safely and in such a way that they do not cause a danger of an accident.",{'ID': '75_Finnish_SafetyOfUse'},"Doors, <e1>gates</e1> and boom barriers must <e2>operate safely</e2> and in such a way that they do not cause a danger of an accident.",necessity,annotated
+4e4fdf56-c45b-4d89-b18f-7a2f24a41ba9,"In spaces intended for more than 60 persons, the width of the access route must be at least 1,200 millimetres.",{'ID': '116_Finnish_SafetyOfUse'},"In <e1>spaces</e1> <e2>intended for more than 60 persons</e2>, the width of the access route must be at least 1,200 millimetres.",selection,annotated
+9b2e2a40-6d63-4ee6-a539-da1d15dd68bd,"Where relevant work is undertaken on a mixed-use building, it should be determined which parking spaces are associated parking spaces for the use of occupants of the dwellings, and which parking spaces are for use by users of the non-residential function of the building.",{'ID': '94_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where relevant <e1>work</e1> is undertaken on a mixed-use building, it should be <e2>determined which parking spaces are associated parking spaces for the use of occupants of the dwellings, and which parking spaces are for use by users of the non-residential function of the building</e2>.",necessity,annotated
+60205cf2-fa87-4195-9415-a6fb144a9b72,"Entrances and passageways to playgrounds and recreation areas used in the wintertime, as well as street areas surrounding the building and other public areas, must be protected from snow and ice falling from the roof of the building using snow barriers, taking into account the pitch of the roof.",{'ID': '96_Finnish_SafetyOfUse'},"<e1>Entrances</e1> and passageways to playgrounds and recreation areas used in the wintertime, as well as street areas surrounding the building and other public areas, must be <e2>protected from snow and ice falling from the roof of the building using snow barriers, taking into account the pitch of the roof</e2>.",necessity,annotated
+f162906e-1097-420e-b2a0-dd746d5794c7,"Where controls are external to the heater, the system should be provided with a time switch/programmer and room thermostat, or programmable room thermostat.",{'ID': '265_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where controls are external to the heater, the <e1>system</e1> should be provided with a <e2>time switch/programmer</e2> and room thermostat, or programmable room thermostat.",necessity,annotated
+fe2a31f5-7b10-4b21-ad13-154856ecdcc8,"Where sheathing board forms the air barrier, airsealing tape should be applied at junctions and edges.",{'ID': '186_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Where <e1>sheathing board</e1> <e2>forms the air barrier</e2>, airsealing tape should be applied at junctions and edges.",selection,annotated
+09b2a395-5293-4b7d-82d4-5312482d59e9_3,,,"Door entry controls, where provided, are mounted 900-1000mm above finished ground level, and at least <e1>0.35W/(m2K)</e1> <e2>density</e2> from any projecting corner.",greater-equal,synthetic
+2cc3d5b0-d3b4-45f2-a00d-838fd3f9abbb_4,,,"There should be a <e1>screed floors</e1>, in the absence of tobacco smoke or other excessive pollutants, of <e2>50 m</e2>.",equal,synthetic
+8e7e4d9a-05b8-4512-91c5-e8dbb9488685,"At night, windows, patio doors and balcony doors should be modelled as closed.",{'ID': '55_UK_DocO_Overheating'},"At night, windows, <e1>patio doors</e1> and balcony doors should be <e2>modelled as closed</e2>.",necessity,annotated
+511c1a7f-08b9-48ec-aea6-9b749fdf31a1_2,,,"A non-residential building shall, considering the intended use and functional units of the building and distances in the building, have an <e1>(16.66 8.33 V0.4)/(1000 24)</e1> of appropriately located <e2>hatch</e2> which are suitable for users of wheelchairs and walking frames with wheels.",equal,synthetic
+cccbc1ea-27be-4d7b-b53c-3cb467a51020,"For heating and cooling systems in a new non-domestic building, or when a heat generator such as a boiler is replaced in an existing non-domestic building, each room should be provided with thermostatic room controls.",{'ID': '220_UK_DocM_V2_AccessAndUseOfBuildings'},"For heating and cooling systems in a new non-domestic building, or when a <e1>heat generator</e1> such as a boiler is replaced in an existing <e2>non-domestic building</e2>, each room should be provided with thermostatic room controls.",part-of,annotated
+0a7ff0c7-c5f9-4069-9d7e-2bfd6c4871d3_0,,,The <e1>facade area</e1> of the extension does not exceed <e2>32mm</e2>.,less-equal,synthetic
+0da52584-1b37-48b5-840f-3795ae695275_9,,,the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where <e1>9 metres</e1> <e2>entrance</e2> are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+ef4f54b6-1099-4404-9fa2-d0c0d5e55543_2,,,The <e1>exposure coefficient</e1> must not exceed the individual dwellings <e2>energy consumption</e2>.,less-equal,synthetic
+fb5d3054-4911-4049-ba09-1c3e80f9c07c_6,,,"The tread of steps in uncovered or unheated outdoor staircases must be no less than 390 millimetres, and the <e1>above</e1> may be no more than <e2>400-600mm</e2>.",less-equal,synthetic
+ec419055-6ed3-4dac-9879-748e2d365a26,"Internal building services: where services penetrate the air barrier, holes should be as small as possible and should be core drilled to limit damage.",{'ID': '180_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Internal building services: where services penetrate the air barrier, holes should be as <e1>small as possible</e1> and should be <e2>core drilled to limit damage</e2>.",none,annotated
+2f8d4247-e53b-49ae-bd26-c4f1765eaee8_8,,,"Extract air of <e1>distance of the basement storey floor from the entry level</e1> <e2>2.4m</e2>, 3 and 4 shall not be used as recirculation air.",equal,synthetic
+23cff3c3-1251-4c5f-9fd9-8f52d25eb494,Gasfired boilers and multi-stage oilfired boilers with an output of more than 500kW should have fully modulating burner controls.,{'ID': '252_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Gasfired boilers</e1> and multi-stage oilfired boilers with an output of more than 500kW should have <e2>fully modulating burner controls</e2>.,necessity,annotated
+46ee0eda-086a-40ab-8e8f-bfa4c85abd49,"If the indoor access route leading to an evacuation area in a non-residential building is via the indoor stairs in the area, these stairs must be wide enough that they can be used to transport an immobile individual on a stretcher.",{'ID': '16_Finnish_SafetyOfUse'},"If the indoor access route leading to an evacuation area in a non-residential building is via the indoor <e1>stairs</e1> in the <e2>area</e2>, these stairs must be wide enough that they can be used to transport an immobile individual on a stretcher.",part-of,annotated
+f17de50f-3c64-4ab3-ac80-dcfb15b99842,Every flight has a minimum clear width of 900mm.,{'ID': '20_UK_DocM_V1_AccessAndUseOfBuildings'},Every <e1>flight</e1> has a minimum <e2>clear width</e2> of 900mm.,part-of,annotated
+2f815a08-db3c-48a6-b248-d69aeac870ee_3,,,"the vertical <e1>total supply air flow</e1> is: a. not more than <e2>14 metres</e2>, where there is no liftway enclosure and no floor penetration; b. more than 2m, where there is a liftway enclosure.",less-equal,synthetic
+956efc87-87de-4d3c-99fb-dc58eab9353b_9,,,A dwelling that is intended for sheltered housing or supported housing of a person with mobility or functional impairment shall have at least one toilet and washing facility which has a free space with a <e1>Unit length</e1> of at least <e2>1400mm</e2>.,greater-equal,synthetic
+8aa4b706-1659-4e30-a4fe-e7f33efe3241_5,,,All <e1>between 550mm and 700mm</e1> <e2>Dwellings</e2> of the compliance checklist should be completed.,equal,synthetic
+f009a781-0ced-408d-b3d1-6ae7a848012e,"The landings in the indoor and outdoor areas of a building must be safe, sufficiently spacious and suitable for their purpose.",{'ID': '31_Finnish_SafetyOfUse'},"The <e1>landings</e1> in the indoor and outdoor <e2>areas</e2> of a building must be safe, sufficiently spacious and suitable for their purpose.",part-of,annotated
+9f8c2fbb-a04e-42f9-8fa0-b7a905dbafa0,"The ventilation openings or slots leading to the ventilation space or gap of a structure equipped with a ventilation space or gap must be positioned so that the ventilation space or gap is fully usable as a ventilation air flow path and that the ventilation space or gap is free of enclosed, non-ventilated areas.",{'ID': '40_Finnish_Health-Humidity'},"The ventilation openings or slots <e1>leading to the ventilation space or gap of a structure equipped with a ventilation space or gap</e1> must be positioned so that the ventilation space or gap is fully usable as a ventilation air flow path and that the ventilation space or gap is <e2>free of enclosed, non-ventilated areas</e2>.",none,annotated
+29232335-402c-4ed9-af74-fd093ac22e28,The natural or mechanical ventilation system of a building shall be strong and its air-tightness shall be at least class B.,{'ID': '95_Finnish_Health-IndoorClimateAndVentilation'},The natural or mechanical ventilation system of a building shall be strong and <e1>its</e1> <e2>air-tightness</e2> shall be at least class B.,part-of,annotated
+e505b13c-7b62-4857-aa2d-544dc986e9c0_8,,,"For dwellings, for external tapered steps and stairs that are part of the building the <e1>shallow projecting</e1> of each step should be a minimum of <e2>50 m2</e2>.",greater-equal,synthetic
+eccd4f77-ef4a-41fd-a22a-620c84fdddd4,There is a minimum of 400mm of worktop to at least one side of the oven and fridge or fridge freezer where this is taller than the worktop height (or to one side of a pair of tall appliances where they are located together at the end of a run).,{'ID': '98_UK_DocM_V1_AccessAndUseOfBuildings'},There is a minimum of <e1>400mm</e1> of <e2>worktop</e2> to at least one side of the oven and fridge or fridge freezer where this is taller than the worktop height (or to one side of a pair of tall appliances where they are located together at the end of a run).,selection,annotated
+aef92227-4c01-4c59-b96d-ce414540606b,"Appliances capable of burning both biomass fuel and fossil fuel the CO2 emission factor and primary energy factor for dua-lfuel appliances should be used, except where the building is in a smoke control area, when the anthracite figure should be used.",{'ID': '63_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Appliances</e1> capable of burning both biomass fuel and fossil fuel the CO2 emission factor and <e2>primary energy factor</e2> for dua-lfuel appliances should be used, except where the building is in a smoke control area, when the anthracite figure should be used.",necessity,annotated
+9b594ead-759a-420d-8d1c-52f007daaca4,"Each office should have the means to provide purge ventilation, to reduce pollutants before the office space is occupied or after activities such as painting.",{'ID': '56_UK_DocF_V2_Ventilation'},"Each office should have the <e1>means</e1> to <e2>provide purge ventilation</e2>, to reduce pollutants before the office space is occupied or after activities such as painting.",selection,annotated
+73a6e4e0-c157-4cae-bc28-c0788f6a1e53,"Activation (e.g. motion sensors and push buttons), safety features and the time-lapse allowed for entry and exit through powered door systems should be carefully considered to suit the needs of people who cannot react quickly.",{'ID': '73_UK_DocM_V2_AccessAndUseOfBuildings'},"Activation (e.g. motion sensors and push buttons), <e1>safety features</e1> and the time-lapse allowed for entry and exit through powered door systems should be <e2>carefully considered to suit the needs of people who cannot react quickly</e2>.",necessity,annotated
+09b2a395-5293-4b7d-82d4-5312482d59e9_7,,,"Door entry controls, where provided, are mounted 900-1000mm above finished ground level, and at least <e1>200 lux</e1> <e2>constraints</e2> from any projecting corner.",greater-equal,synthetic
+6bf41e87-d7c1-42a5-bf0d-67c711a21753,"Additionally, a sign identifying the floor reached should be provided on each landing in a location that can be easily seen from the lifting device and is designed so that it contrasts visually with its surrounding.",{'ID': '105_UK_DocM_V2_AccessAndUseOfBuildings'},"Additionally, a <e1>sign</e1> <e2>identifying the floor reached</e2> should be provided on each landing in a location that can be easily seen from the lifting device and is designed so that it contrasts visually with its surrounding.",selection,annotated
+14d1a086-d933-4946-b222-98f707d16c03,Lifting devices should be positioned with the end opposite to the entry point located against a wall at every floor level.,{'ID': '86_UK_DocM_V1_AccessAndUseOfBuildings'},<e1>Lifting devices</e1> should be <e2>positioned with the end opposite to the entry point located against a wall at every floor level</e2>.,necessity,annotated
+5f7b8ff7-50d0-46a2-a48b-fa19786c98fd,"If  the  domestic  hot  water cylinder  is  located  inside  the  building  envelope,  50  of  the  calculated  domestic  hot  water cylinder heat loss shall be added to the thermal load of the spaces of the building.",{'ID': '105_Finnish_EnergyEfficiency'},"If the domestic hot water cylinder is <e1>located inside the building envelope</e1>, 50 of the <e2>calculated</e2> domestic hot water cylinder heat loss shall be added to the thermal load of the spaces of the building.",none,annotated
+34a524ec-6994-426f-86af-78788fd34a80_5,,,"Between the locking points for the mortice lock and surface-mounted rim lock, the <e1>CO2 emission factor</e1> should be <e2>1 in 40</e2>.",equal,synthetic
+3f7b1106-06a0-4c3f-a01d-e275421775ac,That background ventilators allow fresh air into the home and should be left open.,{'ID': '228_UK_DocF_V1_Ventilation'},That <e1>background ventilators</e1> allow fresh air into the home and should be <e2>left open</e2>.,necessity,annotated
+ef4ec541-e1a7-47d4-9a83-94715d8900ba,"Where one or more parking spaces are within a covered car park, the requirement to install electric vehicle charge points should be met by installing charge points in parking spaces that are not within a covered car park.",{'ID': '89_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where one or more parking spaces are within a covered car park, the <e1>requirement</e1> to install electric vehicle charge points should be <e2>met by installing charge points in parking spaces that are not within a covered car park</e2>.",necessity,annotated
+208b093d-361f-4aec-819d-4abca4e72c68_7,,,"in an evacuation area where the <e1>Manual control</e1> is <e2>300mm</e2>, the second exit may be no less than 900 millimetres in width.",equal,synthetic
+984c252b-74f4-4d85-9080-1c8ae1851eca,"If performance requires thicker glass to be used, an equivalent window unit with standard thickness (6mm) glazing should be shown to meet the required standard.",{'ID': '113_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If performance requires thicker glass to be used, an equivalent <e1>window unit</e1> with standard thickness (6mm) glazing should be <e2>shown to meet the required standard</e2>.",necessity,annotated
+10b37d1a-a0b5-4dfb-8bcc-39317d144580,"On variable volume systems, variable speed glandless circulators should be used.",{'ID': '289_UK_DocM_V2_AccessAndUseOfBuildings'},"On <e1>variable</e1> <e2>volume systems</e2>, variable speed glandless circulators should be used.",selection,annotated
+1d10aa43-7650-46b1-83c3-867f212ab9c3,Background ventilators should meet the performance standards for both of the following: a. air flow from outside to inside the dwelling; b. air flow from inside the dwelling to outside.,{'ID': '58_UK_DocF_V1_Ventilation'},Background ventilators should meet the performance standards for both of the following: a. air flow <e1>from outside to inside the dwelling</e1>; b. <e2>air flow</e2> from inside the dwelling to outside.,none,annotated
+4a82f789-a98a-4379-9b81-2a20cfba6c87_2,,,"If the internal ties must be centred on the supporting line, the minimum value of the <e1>flushing</e1>, <e2>two persons per square metre</e2>, will also be applied to internal ties.",greater-equal,synthetic
+29c431ee-ea93-491d-ab13-06418d93c488_11,,,"If <e1>cross-sectional area</e1> is greater than <e2>600 x 600 millimetres</e2>, manual control is acceptable.",greater,synthetic
+4e8c5c50-44af-48f6-b959-e6f9b31afa1e_2,,,"If the planned time of use of a modular or portable building in a single location is less than two years, the only practical <e1>storey</e1> may be <e2>exhaust outlets</e2>.",equal,synthetic
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as <e1>wash rooms</e1> <e2>in connection with saunas</e2>; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",selection,annotated
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_4,,,"The wall ties should have a horizontal spacing of 900mm and a vertical spacing of 450mm, or alternatively should be spaced such that the <e1>air flow rate</e1> is not less than <e2>50 m</e2>.",greater-equal,synthetic
+09b2a395-5293-4b7d-82d4-5312482d59e9_3,,,"Door entry controls, where provided, are mounted <e1>7 mg/m3 (6 ppm)</e1> <e2>surface</e2> finished ground level, and at least 300mm away from any projecting corner.",equal,synthetic
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be class E 15.",{'ID': '134_Finnish_FireSafety'},"The <e1>fire compartmenting requirement</e1> for the balcony slab of a glazed balcony of a building exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be <e2>class</e2> E 15.",none,annotated
+f36650d9-cd31-4795-9728-7a4dcf3cadde,"Dwellings, accommodation premises, institutions, day-care institutions, day-care centres and other early childhood education premises and schools must be provided with an appropriate system that gives a warning at an early stage of a beginning fire.",{'ID': '229_Finnish_FireSafety'},"Dwellings, accommodation premises, institutions, day-care institutions, day-care centres and other early childhood education premises and <e1>schools</e1> must be provided with an appropriate <e2>system that gives a warning at an early stage of a beginning fire</e2>.",necessity,annotated
+67657794-a272-4ab2-9b19-df29e9d24844,Ground floors and external walls: the wall-to-floor junctions should be detailed to achieve continuity of insulation.,{'ID': '160_UK_DocL_V1_ConsrvationOfFuelAndPower'},Ground floors and external walls: the <e1>wall-to-floor junctions</e1> should be <e2>detailed to achieve continuity of insulation</e2>.,necessity,annotated
+ef4ec541-e1a7-47d4-9a83-94715d8900ba,"Where one or more parking spaces are within a covered car park, the requirement to install electric vehicle charge points should be met by installing charge points in parking spaces that are not within a covered car park.",{'ID': '89_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where <e1>one</e1> or more parking spaces are within a covered car park, the requirement <e2>to install electric vehicle charge points</e2> should be met by installing charge points in parking spaces that are not within a covered car park.",none,annotated
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_1,,,Skirtings totalling up to 50mm total thickness and shallow projecting ducts or <e1>cavity wall</e1> above <e2>70 kN</e2> may be discounted when measuring clear width.,greater,synthetic
+3f7c10d1-d801-4351-bc85-187cf8cffeb3,The water vapour resistance and air tightness of external walls and their various layers as well as the structures attached to the external wall and joints to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,{'ID': '96_Finnish_Health-Humidity'},The water vapour resistance and <e1>air tightness</e1> of external <e2>walls</e2> and their various layers as well as the structures attached to the external wall and joints to the external wall must prevent the accumulation of moisture content of wall structures from internal water vapour diffusion or convection that is harmful from the viewpoint of moisture performance of structures.,part-of,annotated
+493ec553-7761-4d1e-aa98-05d925ddf955_8,,,The <e1>energy savings</e1> of a horizontal hatch must be at least <e2>40 degrees Celsius</e2>.,greater-equal,synthetic
+c0a6d35c-cc20-428b-941d-c3e3e6365c74_4,,,"In a tier that is uninterrupted by cross-gangways, and where the <e1>effective rated output</e1> exceeds <e2>3.3m</e2>, use a maximum number of steps of 40.",greater,synthetic
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",{'ID': '75_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major <e1>renovation</e1> (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds <e2>7%</e2> of the total cost of the major renovation.",none,annotated
+5577528f-8fa0-4ca3-96f6-ea418091cb86,The side edges of stairs and landings must be fitted with a raised camber to prevent slipping over the edge if a cube measuring more than 50 millimetres in width is able to pass through the opening between the plane level and the handrail or wall.,{'ID': '32_Finnish_SafetyOfUse'},The side edges of stairs and <e1>landings</e1> must be fitted with a raised camber to prevent slipping over the edge if a cube measuring more than 50 millimetres in width is <e2>able to pass through the opening between the plane level and the handrail or wall</e2>.,none,annotated
+7d35f4c4-fa65-4d68-a974-f54386ca8aee_10,,,"However, a horizontal <e1>fan unit</e1> in a protective part must be no higher than <e2>EI 15</e2>.",less-equal,synthetic
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_2,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for <e1>travel distance</e1> <e2>A</e2> and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",equal,synthetic
+4470dde4-6422-4c13-9781-de68c3e075dc,"The outdoor air flow of a dwelling unit, however, shall be designed to be a minimum of 18 dm3/s.",{'ID': '54_Finnish_Health-IndoorClimateAndVentilation'},"The outdoor <e1>air flow</e1> of a <e2>dwelling unit</e2>, however, shall be designed to be a minimum of 18 dm3/s.",part-of,annotated
+45adb0b6-63ee-4f42-b6a3-8fc396221c67_2,,,The <e1>Geo-location</e1> of the insulation plus any required air gap should be at least to the <e2>fire compartmenting requirement</e2> of the rafters.,greater-equal,synthetic
+0ea1e862-2434-4fc8-97a2-b076c992ef20_7,,,"The width of an exit must be at least 1,200 millimetres and its free <e1>building primary energy rate</e1> must be at least <e2>300 litres</e2>.",greater-equal,synthetic
+9497b383-7217-4366-80c5-6f5677b30893,"If the building is heated through a district heat network or community heating system, the effective rated output should be based on the capacity of the equipment installed in the building, making reasonable assumptions for the operation of the district heat network or community heating system, including flow temperatures.",{'ID': '325_UK_DocM_V2_AccessAndUseOfBuildings'},"If the building is heated through a district heat network or community heating system, the effective <e1>rated output</e1> should be <e2>based on the capacity of the equipment installed in the building</e2>, making reasonable assumptions for the operation of the district heat network or community heating system, including flow temperatures.",necessity,annotated
+3e9fc57e-bc69-4f17-a056-dd7767afa9bb,"If the height of the building does not exceed 28 metres, access to the attic fire compartments from the outside shall be required.",{'ID': '241_Finnish_FireSafety'},"If the height of the building does not exceed 28 metres, access to the <e1>attic</e1> <e2>fire compartments</e2> from the outside shall be required.",part-of,annotated
+9952f64d-e0df-4b03-84af-150782f81387_6,,,"For mobility-impaired people, a <e1>air</e1> of at least <e2>1800mm</e2> is preferred.",greater-equal,synthetic
+1cf2f287-457b-4f89-8c43-135ffda5029a,"The provision made must be sufficient to (a) meet the needs of occupants with differing needs, including some older or disabled people; and (b) to allow adaptation of the dwelling to meet the changing needs of occupants over time.",{'ID': '36_UK_DocM_V1_AccessAndUseOfBuildings'},"The <e1>provision</e1> made must be sufficient to (a) meet the needs of occupants with differing needs, including some older or disabled people; and (b) to <e2>allow adaptation of the dwelling to meet the changing needs of occupants over time</e2>.",necessity,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_2,,,"If the air flows of <e1>load capacity</e1> 1 and <e2>six metres</e2> are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+bfc84a1d-db59-4f4a-bd93-3d5f1043d11e,A notice of the measured air flow rates must be given to the building control body.,{'ID': '183_UK_DocF_V1_Ventilation'},A <e1>notice</e1> of the measured <e2>air flow rates</e2> must be given to the building control body.,selection,annotated
+f6ea9be6-644d-4dc6-8954-d115bdd528c8,"The building emission rate and building primary energy rate submission should be accompanied by a report, signed by a suitably qualified person, detailing how the combined emission factor has been derived.",{'ID': '62_UK_DocM_V2_AccessAndUseOfBuildings'},"The <e1>building emission rate</e1> and building primary energy rate <e2>submission</e2> should be accompanied by a report, signed by a suitably qualified person, detailing how the combined emission factor has been derived.",part-of,annotated
+7d877df3-9aa7-4dff-a64d-5356a66c944d_8,,,"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a <e1>energy efficiency</e1> exceeding <e2>2.5 ties/m2</e2> and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",greater,synthetic
+e21fa967-934e-4a29-a66d-252fdbbf928f_3,,,"If the parasitic energy use is unknown, an <e1>automatic flow adjustment</e1> of <e2>0.8 metres</e2> should be made for any control system.",equal,synthetic
+eefe1191-2903-4fb8-9138-6471e09fb67d_10,,,The <e1>breaking</e1> exceeds <e2>EI 15</e2> at 11pm.,greater,synthetic
+99a53f17-48cb-4012-a47b-700761e0983b,Where a new building which is not a residential building or a mixed-use building has more than 10 parking spaces (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,{'ID': '61_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},Where a new building which is not a residential building or a mixed-use building has more than 10 parking spaces (a) <e1>one</e1> of those parking spaces must have <e2>access to one electric vehicle charge point</e2>; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,none,annotated
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab_7,,,"If the <e1>fire performance</e1> of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds <e2>160 millimetres</e2> of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",greater,synthetic
+0aaf71f0-a482-4a72-a407-0d6db79c7f6f,"In a building consisting primarily of one storey, no more than 200 m2 of fire-compartmented and no more than 50 m2 of non-fire-compartmented areas that essentially relate to the business of the building may be located on the level of second storey.",{'ID': '69_Finnish_FireSafety'},"In a building consisting primarily of one storey, no more than <e1>200 m2</e1> of fire-compartmented and no more than 50 m2 of non-fire-compartmented <e2>areas</e2> that essentially relate to the business of the building may be located on the level of second storey.",less-equal,annotated
+15c28729-22a9-4992-b43a-bdcf457c0526,"Both before and after a newly constructed building is built, a notice must be given to the building control body of the calculations.",{'ID': '45_UK_DocM_V2_AccessAndUseOfBuildings'},"Both before and after a newly constructed building is built, a <e1>notice</e1> must be given to the <e2>building control body</e2> of the calculations.",necessity,annotated
+385a4365-40c0-4c07-8854-b07bde292fd2,"The  electrical  energy  consumption  of  a  mechanical ventilation  system  shall  be  calculated  on  the  basis  of  air  flows,  specific  fan  powers  and operating times for all air handling units and powered roof ventilators in the building.",{'ID': '109_Finnish_EnergyEfficiency'},"The <e1>electrical</e1> <e2>energy consumption</e2> of a mechanical ventilation system shall be calculated on the basis of air flows, specific fan powers and operating times for all air handling units and powered roof ventilators in the building.",selection,annotated
+fdd9f39e-e397-4172-b4da-3d213a30f987,On-site electricity generation should be provided with automated controls that support the design of the system and the intended use.,{'ID': '335_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>On-site</e1> <e2>electricity generation</e2> should be provided with automated controls that support the design of the system and the intended use.,selection,annotated
+203faa23-7b71-47c9-a6e5-2333ac45389e_7,,,"The riser of the indoor steps of dwelling units and living quarters may be no more than 190 millimetres, and the <e1>widened</e1> must be no less than <e2>160 millimetres</e2>.",greater-equal,synthetic
+d0927095-9e43-4ce4-a740-d5df69dc1dc3,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",{'ID': '84_Finnish_Health-IndoorClimateAndVentilation'},"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the <e1>combined</e1> <e2>air flow</e2> is classified under category 2.",selection,annotated
+73a6e4e0-c157-4cae-bc28-c0788f6a1e53,"Activation (e.g. motion sensors and push buttons), safety features and the time-lapse allowed for entry and exit through powered door systems should be carefully considered to suit the needs of people who cannot react quickly.",{'ID': '73_UK_DocM_V2_AccessAndUseOfBuildings'},"Activation (e.g. motion sensors and push buttons), safety features and the <e1>time-lapse</e1> allowed for entry and exit through <e2>powered</e2> door systems should be carefully considered to suit the needs of people who cannot react quickly.",none,annotated
+7f49ccb1-ce2c-47eb-8b22-2c8e806e5d88_8,,,The resilient layer should be to the full height of the door and <e1>65mm</e1> <e2>centre pane U-value</e2> of the doorset.,equal,synthetic
+29232335-402c-4ed9-af74-fd093ac22e28_11,,,The natural or mechanical ventilation system of a building shall be strong and its air-tightness shall be at least <e1>number of storeys</e1> <e2>180 millimetres</e2>.,greater-equal,synthetic
+0f67dad7-6df9-444b-8e72-f447668e3fde_6,,,"Where sanitary facilities are wheelchair accessible, WC pans should be a minimum of <e1>25mm</e1> <e2>protection</e2>.",greater-equal,synthetic
+1e3d8e3a-93fd-47e2-833e-d7f36c901c77_7,,,Skirtings totalling up to <e1>20 degrees Celsius</e1> <e2>distance</e2> and shallow projecting ducts or casings above 1800mm may be discounted when measuring clear width.,less-equal,synthetic
+d3e7a947-536e-4a49-9823-e27fc0f68b27_3,,,<e1>tread</e1> of landings to be at least equal to the <e2>proportion of the cooling load relating to distribution pipework</e2> of the ramp.,greater-equal,synthetic
+fa8a6d84-eb99-490e-8169-3c65353fb553_2,,,"For large roofs, where the smaller horizontal dimension of the roof is 50 m or more, and the topography is windswept, the value of the <e1>room temperature</e1> shall be at least <e2>9mm</e2>.",greater-equal,synthetic
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the <e1>premises</e1> to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. <e2>technical utility room</e2> with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",necessity,annotated
+2c12675d-93c9-496a-acf9-b30465dae93d,Any flexible ducts should be installed so that the full internal diameter is maintained and flow resistance is minimised.,{'ID': '113_UK_DocF_V1_Ventilation'},Any flexible ducts should be installed so that the <e1>full internal diameter is maintained</e1> and <e2>flow resistance is minimised</e2>.,none,annotated
+df122091-ca53-4134-98a3-47779c06f9df,The index terminal flow rate should be set with the terminal fully open and all other terminals should be adjusted to achieve the required flows at each terminal.,{'ID': '198_UK_DocF_V1_Ventilation'},The index terminal flow rate should be set with the terminal fully open and all other <e1>terminals</e1> should be <e2>adjusted to achieve the required flows at each terminal</e2>.,necessity,annotated
+49c6fd15-70a9-4733-8de8-8dd2fe49fe0a,"If renewable technology such as a wind turbine or photovoltaic array is replaced, the new system should have an electrical output that is at least the same as that of the original installation.",{'ID': '231_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If renewable technology such as a wind turbine or photovoltaic array is replaced, the new system should have an <e1>electrical output</e1> that is <e2>at least the same as that of the original installation</e2>.",selection,annotated
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_8,,,"The wall ties should have a horizontal spacing of 900mm and a <e1>axle group load</e1> of <e2>20 millimetres</e2>, or alternatively should be spaced such that the number of wall ties per square metre is not less than 2.5 ties/m2.",equal,synthetic
+bb3ac5b0-14d0-4d75-95d9-713adc6f2f58,"Any walls, doors and windows should be insulated and draught-proofed to at least the same extent as in the existing dwelling.",{'ID': '433_UK_DocL_V1_ConsrvationOfFuelAndPower'},"Any walls, doors and windows should be insulated and <e1>draught-proofed</e1> to <e2>at least the same extent as in the existing dwelling</e2>.",selection,annotated
+ee0c8c7c-c65e-4403-92e6-628fd680f3bf_5,,,Any panel within the doorset should be at least <e1>0.35W/(m2K)</e1> <e2>power input from controls</e2>.,greater-equal,synthetic
+76bf63bd-30f4-440d-81a0-61ca16170f70_0,,,Control should be maximised and heat gain to uninsulated pipes should only be permitted where the <e1>service life</e1> is less than <e2>4</e2> of the total load.,less,synthetic
+977ccb7b-4580-4ea3-9ea4-5057925c9854,"NOTE: The surface area of the whole building must be included when assessing whether the works constitute a major renovation, even if the building is mixed use.",{'ID': '124_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"NOTE: The <e1>surface area</e1> of the whole building must be <e2>included when assessing whether the works constitute a major renovation</e2>, even if the building is mixed use.",necessity,annotated
+5305da48-b810-4fd8-a0b3-7520f89ff401,"When installing or renovating thermal elements, the element being installed should be draught-proofed, and air-leakage gaps should be filled.",{'ID': '194_UK_DocL_V1_ConsrvationOfFuelAndPower'},"When installing or renovating thermal elements, the <e1>element</e1> <e2>being installed</e2> should be draught-proofed, and air-leakage gaps should be filled.",selection,annotated
+e9d02df9-2fcb-4acc-bd08-18a4348cd823,"If people need to obtain tickets for pay and display parking, the ticket dispensing machines should be located in a way that allows a person in a wheelchair, or a person of short stature, to gain access close to the machine and reach the payment and ticket dispensing functions.",{'ID': '46_UK_DocM_V2_AccessAndUseOfBuildings'},"If <e1>people</e1> need to <e2>obtain tickets for pay and display parking</e2>, the ticket dispensing machines should be located in a way that allows a person in a wheelchair, or a person of short stature, to gain access close to the machine and reach the payment and ticket dispensing functions.",necessity,annotated
+53b7d989-c81f-4e01-a5ec-4b2cb30b4bfa,The size of a fire compartment must be limited so that a fire igniting in the compartment does not cause unreasonably vast damages (compartmentation by area).,{'ID': '104_Finnish_FireSafety'},The <e1>size</e1> of a <e2>fire compartment</e2> must be limited so that a fire igniting in the compartment does not cause unreasonably vast damages (compartmentation by area).,part-of,annotated
+9952f64d-e0df-4b03-84af-150782f81387_4,,,"For mobility-impaired people, a <e1>commissioning sheet</e1> of at least <e2>60</e2> is preferred.",greater-equal,synthetic
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_3,,,"The wall ties should have a horizontal spacing of 900mm and a vertical spacing of 450mm, or alternatively should be spaced such that the <e1>distance of the uppermost floor level from the entry level</e1> is not less than <e2>six metres</e2>.",greater-equal,synthetic
+082c7ed9-3579-48c2-a0d2-076f1edd647c_1,,,"Each of the <e1>1,500 millimetres</e1> <e2>primary energy factor</e2> of the centrally hinged window should be assessed as a single side, bottom or top hung window.",equal,synthetic
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab_8,,,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the <e1>shape</e1> of that installation exceeds <e2>850 millimetres</e2> of the total cost of the major renovation.",greater,synthetic
+8151be81-09ad-4dac-b2d2-f0d757915b6c_8,,,"However, when the snow load can occur, the <e1>domestic  hot  water cylinder heat loss</e1> of the load s should be at least <e2>2</e2>.",greater-equal,synthetic
+5fa7daca-cb50-4397-a736-617e52d30187_2,,,"If <e1>performance</e1> at below 30% are required and unavailable, the <e2>Length</e2> may be taken as equal to that at 30% load.",equal,synthetic
+e20c760b-a97f-4309-b96a-bcec7cc52b39,Water must be able to drain off the roof without causing damage to the building.,{'ID': '102_Finnish_Health-Humidity'},<e1>Water</e1> must be able to <e2>drain off the roof without causing damage to the building</e2>.,necessity,annotated
+0ea1e862-2434-4fc8-97a2-b076c992ef20_3,,,"The width of an exit must be at least 1,200 millimetres and its free <e1>primary energy</e1> must be at least <e2>01:20:00</e2>.",greater-equal,synthetic
+84cd76d7-e5d0-4f39-94bc-0236c65d533a,"in residential buildings of not more than two storeys, one exit of no less than 900 millimetres in width is permitted.",{'ID': '217_Finnish_FireSafety'},"in residential buildings of not more than two storeys, one exit of no less than <e1>900 millimetres</e1> in <e2>width</e2> is permitted.",greater-equal,annotated
+d8066a73-49c2-4e99-825a-b49b9b2ba67d,A landing measuring at least 800 millimetres in length must be reserved in front of and behind a door located in an exit route.,{'ID': '34_Finnish_SafetyOfUse'},A <e1>landing</e1> measuring at least 800 millimetres in <e2>length</e2> must be reserved in front of and behind a door located in an exit route.,part-of,annotated
+31d635b2-1d32-49dd-a848-5b5acaf50128,"For existing dwellings, when installing a complete new or replacement system (e.g. replacing a heating system including the heating appliance, pipework and heat emitters), the energy performance of the whole system should be assessed.",{'ID': '407_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For <e1>existing</e1> dwellings, when <e2>installing a complete new or replacement system</e2> (e.g. replacing a heating system including the heating appliance, pipework and heat emitters), the energy performance of the whole system should be assessed.",none,annotated
+26980508-105c-49db-8595-bf001a48d757_8,,,"In <e1>room temperature sensor</e1> with no fixed seats or <e2>test data</e2>, the number of persons shall be calculated to be two persons per square metre.",not-part-of,synthetic
+d925c189-860a-4fcb-ae88-d1cf8cc14fb8,"The tread of steps in covered or heated outdoor staircases must be no less than 300 millimetres, and the riser may be no more than 160 millimetres.",{'ID': '28_Finnish_SafetyOfUse'},"The tread of <e1>steps</e1> in covered or heated outdoor staircases must be no less than 300 millimetres, and the <e2>riser</e2> may be no more than 160 millimetres.",part-of,annotated
+a387fcb8-ead2-4094-9be9-72d783468b33_1,,,"If the <e1>Level differences</e1> of windows, roof windows, rooflights and doors exceeds <e2>56 metres</e2> of the total floor area of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",greater,synthetic
+f02161e2-1942-4ddf-9627-e3343df63909,"System controls should be wired so that when there is no demand for space heating, the heating appliance and pump are switched off.",{'ID': '214_UK_DocM_V2_AccessAndUseOfBuildings'},"System controls should be <e1>wired</e1> so that <e2>when there is no demand for space heating, the heating appliance and pump are switched off</e2>.",selection,annotated
+656aa2fa-18cb-41ee-ae28-28deb3dffcc3_11,,,The <e1>energy efficiency measures</e1> of the water in the hot water system shall be at least <e2>5m</e2> and available from the hot water plumbing fixture within 20 seconds.,greater-equal,synthetic
+7f3f59a4-fc7e-4b14-8074-384f6cacf548_2,,,"The height of a barrier in a dwellings indoor areas may, however, be at least 0.9 metres if the <e1>product certificate</e1> is less than <e2>1,500  millimetres</e2>.",less,synthetic
+0ea1e862-2434-4fc8-97a2-b076c992ef20,"The width of an exit must be at least 1,200 millimetres and its free height must be at least 2,100 millimetres.",{'ID': '214_Finnish_FireSafety'},"The width of an exit must be at least 1,200 millimetres and its free <e1>height</e1> must be at least <e2>2,100 millimetres</e2>.",greater-equal,annotated
+0df5892a-e396-424e-90f1-74f6ccfb9e1a,"A certain proportion of the changing rooms, washing facilities, saunas and swimming pools in a non-residential building shall be suitable for a person with mobility and functional impairment.",{'ID': '61_Finnish_Accessibility'},"A certain proportion of the changing rooms, washing facilities, <e1>saunas</e1> and swimming pools in a <e2>non-residential building</e2> shall be suitable for a person with mobility and functional impairment.",part-of,annotated
+956efc87-87de-4d3c-99fb-dc58eab9353b_1,,,A dwelling that is intended for sheltered housing or supported housing of a person with mobility or functional impairment shall have at least one toilet and washing facility which has a free space with a <e1>configuration</e1> of at least <e2>90</e2>.,greater-equal,synthetic
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3_6,,,"Where the <e1>entrance level</e1> of installing only cable routes is more than <e2>2.0 m3/(h m2)</e2> of the total cost of the major renovation, there is no requirement to install either electric vehicle charge points or cable routes.",greater,synthetic
+984c252b-74f4-4d85-9080-1c8ae1851eca,"If performance requires thicker glass to be used, an equivalent window unit with standard thickness (6mm) glazing should be shown to meet the required standard.",{'ID': '113_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If performance requires <e1>thicker</e1> <e2>glass</e2> to be used, an equivalent window unit with standard thickness (6mm) glazing should be shown to meet the required standard.",selection,annotated
+84cd76d7-e5d0-4f39-94bc-0236c65d533a_11,,,"in residential buildings of not more than two storeys, one exit of no less than <e1>E 15</e1> in <e2>feasibility of installing high-efficiency alternative systems</e2> is permitted.",greater-equal,synthetic
+4a82f789-a98a-4379-9b81-2a20cfba6c87_3,,,"If the internal ties must be centred on the supporting line, the minimum value of the <e1>sum total</e1>, <e2>24 metres</e2>, will also be applied to internal ties.",greater-equal,synthetic
+3153d771-404e-4a54-ac05-ed1b75e37506_4,,,"Gangways should not be less than 1100mm <e1>building emission rate</e1> unless used by not more than 50 persons, in which case gangways should be a minimum of <e2>900-1000mm</e2>.",greater-equal,synthetic
+5ba5ffe7-ece8-488a-b461-da66237e7888,"All walls, ducts and boxings to the WC/cloakroom, bathroom and shower room should be strong enough to support grab rails, seats and other adaptations that could impose a load of up to 1.5kN/m2.",{'ID': '54_UK_DocM_V1_AccessAndUseOfBuildings'},"All <e1>walls</e1>, ducts and boxings to the WC/cloakroom, <e2>bathroom</e2> and shower room should be strong enough to support grab rails, seats and other adaptations that could impose a load of up to 1.5kN/m2.",part-of,annotated
+2a256a9c-0b8a-4acf-87e1-86a5857f36a3_10,,,"Where a driveway forms all, or part of, the approach route, an <e1>between a solar primary and secondary system</e1> of at least <e2>600kg/m3</e2> wide should be provided so that a wheelchair user can pass a parked car.",greater-equal,synthetic
+3c6b438e-d99a-4c4d-aa19-0ec4f3f27662,"When installing controlled fittings, the controlled fitting should be well fitted and reasonably draught-proof.",{'ID': '162_UK_DocM_V2_AccessAndUseOfBuildings'},"When <e1>installing</e1> <e2>controlled fittings</e2>, the controlled fitting should be well fitted and reasonably draught-proof.",selection,annotated
+2cadb28f-a6c8-4fe2-b1c9-a918eb5437f9,On-site electricity generation systems must be commissioned to ensure that they produce as much electricity as is reasonable in the circumstances.,{'ID': '372_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>On-site</e1> <e2>electricity generation systems</e2> must be commissioned to ensure that they produce as much electricity as is reasonable in the circumstances.,selection,annotated
+8aa4b706-1659-4e30-a4fe-e7f33efe3241,All three parts of the compliance checklist should be completed.,{'ID': '108_UK_DocO_Overheating'},All three <e1>parts</e1> of the <e2>compliance checklist</e2> should be completed.,part-of,annotated
+a7e4ad57-ea09-4d8e-8b3a-4d33447237ab_2,,,"The free opening of the vertical hatch or window of an emergency exit must be at least <e1>9 metres</e1> in <e2>integrity</e2> and 500 millimetres in width; however, the sum of these must be at least 1,500 millimetres.",greater-equal,synthetic
+3c0a8ccb-d813-40fb-b69b-88250d3bc4ec_0,,,These fittings should not exceed a <e1>that</e1> of <e2>20 degrees Celsius</e2>.,less-equal,synthetic
+81314489-dcd9-410f-9b15-595b87e7c8f9,"The resilient layer should be timber sheathing at least 9mm thick, expanded metal or a similar resilient material.",{'ID': '14_UK_DocQ_Security_Dwellings'},"The resilient layer should be timber sheathing at least <e1>9mm</e1> <e2>thick</e2>, expanded metal or a similar resilient material.",greater-equal,annotated
+8cef7dc5-2d76-4dd8-80c5-6861b11a8f6f_3,,,"Where the work concerns a building containing more than <e1>450mm</e1> <e2>patient  rooms</e2>, the work must be carried out so as to ensure that the building is equipped in addition with a common access point for gigabit-capable public electronic communications networks.",greater,synthetic
+0da52584-1b37-48b5-840f-3795ae695275_11,,,the minimum clear dimensions of the platform are: <e1>200 m2</e1> <e2>energy savings</e2> and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+0da52584-1b37-48b5-840f-3795ae695275,the minimum clear dimensions of the platform are: 1100mm wide and 1400mm deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,{'ID': '119_UK_DocM_V2_AccessAndUseOfBuildings'},the <e1>minimum</e1> clear dimensions of the platform are: 1100mm wide and <e2>1400mm</e2> deep where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,none,annotated
+c384013b-c40f-4925-acbe-465e1ca5bc13_4,,,<e1>24 degrees Celsius</e1> <e2>commercial part</e2> per detail should be recorded.,equal,synthetic
+984c252b-74f4-4d85-9080-1c8ae1851eca_9,,,"If performance requires thicker glass to be used, an equivalent window unit with <e1>rated speed</e1> (<e2>600 millimetres</e2>) glazing should be shown to meet the required standard.",equal,synthetic
+09b2a395-5293-4b7d-82d4-5312482d59e9_4,,,"Door entry controls, where provided, are mounted <e1>50mm</e1> <e2>energy consumption</e2> finished ground level, and at least 300mm away from any projecting corner.",equal,synthetic
+7d7d55f1-b28d-4ce8-aec6-dd4dc0786ce8_10,,,"For sizes of cylinder not listed, the <e1>areas</e1> from the cylinder should not exceed <e2>90mm</e2>, where V is the volume in litres.",less-equal,synthetic
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",{'ID': '75_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If the <e1>cost</e1> of <e2>installing the required electric vehicle charge point and cable routes for electric vehicle charge points</e2> exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",selection,annotated
+4f2b56cb-9852-4406-bbea-31f426fb4910,"replacing a heating system including the heating appliance, pipework and heat emitters), the energy performance of the whole system should be assessed, and the results documented and handed over to the building owner with the manufacturers supporting literature.",{'ID': '397_UK_DocM_V2_AccessAndUseOfBuildings'},"replacing a heating system including the heating appliance, pipework and <e1>heat emitters</e1>), the <e2>energy performance</e2> of the whole system should be assessed, and the results documented and handed over to the building owner with the manufacturers supporting literature.",none,annotated
+0a6d6be2-bb25-4a7d-ac98-33351e1a2bb7,"Wheelchair-accessible bedrooms should be sufficiently spacious to enable a wheelchair user to transfer to one side of a bed, with or without assistance.",{'ID': '144_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Wheelchair-accessible</e1> <e2>bedrooms</e2> should be sufficiently spacious to enable a wheelchair user to transfer to one side of a bed, with or without assistance.",selection,annotated
+12e545d1-64f4-45c9-a520-5b8a003eba0a_7,,,"If the dwelling has more than <e1>10 kN</e1> exposed <e2>boom barriers</e2>, the area of background ventilators on each facade should be similar, to allow cross-ventilation.",greater,synthetic
+46f5be2a-1514-420b-bc39-331fc6e0d2df_8,,,"The dwelling primary energy rate, <e1>relationship</e1> and dwelling fabric energy efficiency rate, all calculated using the measured air permeability, must not be higher than the target primary energy rate, <e2>tread</e2> and target fabric energy efficiency rate, respectively.",less-equal,synthetic
+ccc405a0-c6d6-4ace-ad70-e0cfe07cd1e3,"Stairs, ladders and ramps shall be so designed, constructed and installed as to be safe for people moving between different levels in or about the building.",{'ID': '14_UK_DocK_ProtectionFromFalling'},"<e1>Stairs</e1>, ladders and ramps shall be so <e2>designed, constructed and installed as to be safe for people moving between different levels in or about the building</e2>.",necessity,annotated
+ed2cca4a-50f7-470d-9752-dd8722385a24,"In dwellings and other premises that are used by children, restrictors must be installed on windows and other openings where there may be a danger of falling, and these must be such that they limit the easy opening of the window to 100 millimetres.",{'ID': '80_Finnish_SafetyOfUse'},"In dwellings and other <e1>premises</e1> that are used by children, restrictors must be installed on <e2>windows</e2> and other openings where there may be a danger of falling, and these must be such that they limit the easy opening of the window to 100 millimetres.",part-of,annotated
+88e23b46-22d9-4be6-87b7-40541f7995a9,"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the distance of the uppermost floor level from the entry level exceeds 24 metres; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",{'ID': '254_Finnish_FireSafety'},"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the distance of the uppermost floor level from the entry level exceeds 24 metres; 2) in the premises below the entry level of the building, when the <e1>distance of the basement storey floor from the entry level</e1> exceeds <e2>14 metres</e2>.",greater,annotated
+ef4f54b6-1099-4404-9fa2-d0c0d5e55543,The dwelling primary energy rate must not exceed the individual dwellings target primary energy rate.,{'ID': '64_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>dwelling primary energy rate</e1> must not exceed the individual dwellings <e2>target primary energy rate</e2>.,less-equal,annotated
+bb9ec292-062b-43c3-8590-856dd5f6b890_5,,,"The <e1>supports</e1> and building emission rate calculated using the measured air permeability must not be higher than the <e2>from the inside face of the wall</e2> and target emission rate, respectively.",less-equal,synthetic
+0096a3bf-ac16-4a75-adf9-8c3f4a9b8610,The smaller dimension of each panel which can be either the width or height of the panel should be 230mm or less.,{'ID': '33_UK_DocQ_Security_Dwellings'},The smaller <e1>dimension</e1> of each panel which can be either the width or <e2>height</e2> of the panel should be 230mm or less.,selection,annotated
+2633c957-07b4-4caa-a9d6-5acbac16b0b0,NOTE: Linear interpolation should be used to determine efficiencies between manufacturers declared efficiencies at 30 and 100 load.,{'ID': '245_UK_DocM_V2_AccessAndUseOfBuildings'},NOTE: Linear interpolation should be used to determine <e1>efficiencies</e1> between <e2>manufacturers declared efficiencies</e2> at 30 and 100 load.,selection,annotated
+bf798097-bb99-42d0-a73f-8cebab8fbeb8_2,,,"In the entrance halls and other indoor areas of administrative, service and business premises and in assembly areas, the <e1>planned time of use</e1> of the steps must be no more than <e2>150mm</e2> and the tread must be no less than 300 millimetres.",less-equal,synthetic
+7e34700e-92de-4b00-a820-f4085a2e186c_2,,,"If the free gap between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than 2 metres, the wall in question must be <e1>diameter</e1> <e2>100 millimetres</e2>.",equal,synthetic
+77f993c6-dff1-4f9a-8f66-73221d3cbaff_10,,,"If the dwelling only has <e1>1,000 millimetres</e1> <e2>staircase</e2>, a minimum ventilation rate of 13l/s should be used.",equal,synthetic
+75c60084-6878-472d-8694-e8739e0dd76c_7,,,The <e1>that</e1> of access routes in assembly areas with a maximum capacity of 60 persons must be at least <e2>300mm</e2>.,greater-equal,synthetic
+bfdf95da-d422-47cd-83d7-a30a4969f2e6_0,,,"If the internal ties must be centred on the supporting line, the minimum value of the <e1>control capabilities</e1>, <e2>0.3W/m2</e2>, will also be applied to internal ties.",greater-equal,synthetic
+a477ee34-044e-443b-a95f-fbb1da913c38,"Changing places toilets, facilities designed for individuals with complex and multiple impairments who may require the assistance of up to two assistants, should be provided in addition to any wheelchair-accessible accommodation in separate-sex toilet washrooms, wheelchair-accessible unisex toileting facilities and baby changing facilities.",{'ID': '160_UK_DocM_V2_AccessAndUseOfBuildings'},"Changing places toilets, facilities designed for individuals with complex and multiple impairments who may require the assistance of up to two assistants, should be provided in addition to any wheelchair-accessible accommodation in separate-sex <e1>toilet</e1> <e2>washrooms</e2>, wheelchair-accessible unisex toileting facilities and baby changing facilities.",part-of,annotated
+4d80c4d1-08ee-481a-9f9c-e9151ce1094d,"The area of windows, roof windows, rooflights and doors should not exceed 25 of the total floor area of the dwelling.",{'ID': '421_UK_DocL_V1_ConsrvationOfFuelAndPower'},"The area of windows, <e1>roof windows</e1>, rooflights and <e2>doors</e2> should not exceed 25 of the total floor area of the dwelling.",none,annotated
+a387fcb8-ead2-4094-9be9-72d783468b33,"If the area of windows, roof windows, rooflights and doors exceeds 25 of the total floor area of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",{'ID': '422_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If the <e1>area</e1> of windows, roof windows, <e2>rooflights</e2> and doors exceeds 25 of the total floor area of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",part-of,annotated
+d0b6759e-deec-451d-bd7a-ec65b96048be,"extract air of category 3 shall be conducted through individual ducts, or common ducts serving spaces of the same type as regards level of air purity, to the outdoors, into a collection duct installed above the spaces it serves or into an extract air chamber.",{'ID': '130_Finnish_Health-IndoorClimateAndVentilation'},"extract air of <e1>category</e1> <e2>3</e2> shall be conducted through individual ducts, or common ducts serving spaces of the same type as regards level of air purity, to the outdoors, into a collection duct installed above the spaces it serves or into an extract air chamber.",equal,annotated
+4ec44f57-abad-41aa-bd8c-5c4656e62bf9,The air in a building shall flow from spaces of higher indoor air purity to spaces of lower indoor air purity.,{'ID': '81_Finnish_Health-IndoorClimateAndVentilation'},The <e1>air</e1> in a building shall <e2>flow from spaces of higher indoor air purity to spaces of lower indoor air purity</e2>.,necessity,annotated
+9fd15b82-fc32-4364-8724-f1ef14f0c047,The cooker hood should span at least the full width of the cooker.,{'ID': '36_UK_DocF_V1_Ventilation'},The cooker hood should <e1>span</e1> at least the <e2>full width</e2> of the cooker.,greater-equal,annotated
+76bf63bd-30f4-440d-81a0-61ca16170f70_4,,,"Control should be maximised and heat gain to uninsulated pipes should only be permitted where the <e1>number</e1> is less than <e2>2,100 millimetres</e2> of the total load.",less,synthetic
+6ab07828-b6aa-4a60-8860-333f061a0fde,"Door furniture on manually operated non-powered doors should be easy to operate by people with limited manual dexterity, and be readily apparent against the background of the door.",{'ID': '71_UK_DocM_V2_AccessAndUseOfBuildings'},"<e1>Door furniture</e1> on manually operated non-powered <e2>doors</e2> should be easy to operate by people with limited manual dexterity, and be readily apparent against the background of the door.",part-of,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3_6,,,"If the air flows of extract air categories 1 and 2 are combined into the same duct and <e1>installation</e1> <e2>200 m2</e2> air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",equal,synthetic
+e46efdc3-02a8-4440-870d-a6cdc1b34430,NOTE: Rooms that are designed to contain printers and photocopiers in substantial use (more than 30 minutes per hour) should not be designed to be occupied.,{'ID': '44_UK_DocF_V2_Ventilation'},NOTE: <e1>Rooms</e1> that are <e2>designed to contain printers and photocopiers in substantial use (more than 30 minutes per hour)</e2> should not be designed to be occupied.,selection,annotated
+86831830-e7f0-4b90-aa27-dc0542b7ba4d_9,,,"If a residential block of flats does not have a lift, the stairs between floor levels must have natural light and at least <e1>180 millimetres</e1> <e2>directions</e2>.",greater-equal,synthetic
+3724fd47-22f7-432c-81a2-1abcb95c7df2_1,,,"The <e1>fastening points</e1> installed in a dwellings habitable rooms and kitchens should be no fewer than <e2>190 kN</e2>, except in one bedroom properties, where there should be no fewer than four.",greater-equal,synthetic
+ef4ec541-e1a7-47d4-9a83-94715d8900ba_7,,,"Where <e1>1</e1> or more <e2>existing system</e2> are within a covered car park, the requirement to install electric vehicle charge points should be met by installing charge points in parking spaces that are not within a covered car park.",greater-equal,synthetic
+56b0e4bf-81d7-4ab9-855b-780ef2f0b1d3,"Storage premises with a fire load exceeding 1,200 MJ/m2 are not permitted within the building.",{'ID': '73_Finnish_FireSafety'},"<e1>Storage premises</e1> with a <e2>fire load</e2> exceeding 1,200 MJ/m2 are not permitted within the building.",part-of,annotated
+493ec553-7761-4d1e-aa98-05d925ddf955_3,,,The <e1>step</e1> of a horizontal hatch must be at least <e2>20C</e2>.,greater-equal,synthetic
+e874f337-2067-4e77-ad32-c3b857f40e7a_8,,,"If the <e1>one-hour  A-weighted  equivalent continuous sound level of impulsive, narrow-band or low-frequency noise</e1> exceeds <e2>one metre</e2>, the total minimum width of the exits shall be calculated by increasing the original 1,200 millimetres by 400 millimetres for each additional group of 60 people.",greater,synthetic
+da4d5959-6e64-4e04-a1f3-8b42b6addab0_3,,,The outdoor <e1>difference in light reflectance value</e1> used in the calculations for buildings other than those in intended use categories 1 and 2 outside the occupancy period shall be at least <e2>23C</e2>.,greater-equal,synthetic
+2a8898d7-8561-4f67-9979-1bbba8ad42e6,"If insulating material is inserted into a cavity in a cavity wall, reasonable precautions shall be taken to prevent the subsequent permeation of any toxic fumes from that material into any part of the building occupied by people.",{'ID': '3_UK_DocD_ToxicSubstances'},"If <e1>insulating material</e1> is inserted into a <e2>cavity</e2> in a cavity wall, reasonable precautions shall be taken to prevent the subsequent permeation of any toxic fumes from that material into any part of the building occupied by people.",part-of,annotated
+12e545d1-64f4-45c9-a520-5b8a003eba0a,"If the dwelling has more than one exposed facade, the area of background ventilators on each facade should be similar, to allow cross-ventilation.",{'ID': '85_UK_DocF_V1_Ventilation'},"If the dwelling has more than <e1>one</e1> exposed <e2>facade</e2>, the area of background ventilators on each facade should be similar, to allow cross-ventilation.",greater,annotated
+20609d43-016e-4314-9620-256f73f1c6ed,"The general ventilation rate for a new conservatory and, if necessary, adjoining rooms could be achieved using background ventilators.",{'ID': '160_UK_DocF_V1_Ventilation'},"The general ventilation rate for a <e1>new</e1> <e2>conservatory</e2> and, if necessary, adjoining rooms could be achieved using background ventilators.",selection,annotated
+05fdde92-d8af-42ad-963b-9019c69a8ab3,"For a timber frame where the intermediate floor structure breaches the external wall insulation, further insulation of the same thickness as the insulation used in the external wall should be included within the depth of the intermediate floor structure.",{'ID': '163_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For a timber frame where the intermediate floor structure breaches the external wall insulation, further insulation of the same thickness as the insulation <e1>used in the external wall</e1> should be <e2>included within the depth of the intermediate floor structure</e2>.",none,annotated
+354c849e-8e02-47ec-992c-e5431a62cb3f,Ventilation systems that provide supply and extract ventilation should be fitted with a heat recovery system where technically feasible.,{'ID': '309_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Ventilation systems</e1> that provide supply and extract ventilation should be <e2>fitted with a heat recovery system where technically feasible</e2>.,necessity,annotated
+8efb6108-e49e-4d64-a1e4-22e3f9128b17_7,,,"When calculating the reference heat loss of a building, the value of <e1>2</e1> shall be used as the <e2>height</e2> for the air leakage rate figure for the building envelope.",equal,synthetic
+316c89ee-aa42-4e7a-9372-960cf25b3265,Extract ventilation may be by natural means or by mechanical means (e.g. by an extract fan or acentral system).,{'ID': '105_UK_DocF_V2_Ventilation'},<e1>Extract</e1> <e2>ventilation</e2> may be by natural means or by mechanical means (e.g. by an extract fan or acentral system).,part-of,annotated
+8efb6108-e49e-4d64-a1e4-22e3f9128b17,"When calculating the reference heat loss of a building, the value of 2.0 m3/(h m2) shall be used as the reference value for the air leakage rate figure for the building envelope.",{'ID': '136_Finnish_EnergyEfficiency'},"When calculating the reference heat loss of a building, the value of 2.0 m3/(h m2) shall be used as the reference value for the <e1>air leakage rate figure</e1> for the building <e2>envelope</e2>.",part-of,annotated
+ad30824c-74be-4f4f-916a-dfe1e0a89205,"It should be noted that double buggies are wider than wheelchairs and that, where relevant to the building type, this should be borne in mind when determining an appropriate effective clear width for an entrance door.",{'ID': '67_UK_DocM_V2_AccessAndUseOfBuildings'},"It should be noted that double buggies are wider than wheelchairs and that, where relevant to the <e1>building type</e1>, <e2>this</e2> should be borne in mind when determining an appropriate effective clear width for an entrance door.",necessity,annotated
+8207751f-13b8-4fe3-9bfe-4423093d4905,A  building  with  dwellings  or  accommodation  or  patient  rooms  shall  be  designed  and implemented so that the reverberation time of the staircase and exit route is no more than 1.3 seconds.,{'ID': '26_Finnish_AcousticEnvironment'},A building with dwellings or accommodation or patient rooms shall be designed and implemented so that the <e1>reverberation time</e1> of the staircase and exit route is no more than <e2>1.3 seconds</e2>.,less-equal,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8_0,,,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for <e1>habitable area</e1> <e2>1.501kWhPE/kWh</e2> and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",equal,synthetic
+88e23b46-22d9-4be6-87b7-40541f7995a9,"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the distance of the uppermost floor level from the entry level exceeds 24 metres; 2) in the premises below the entry level of the building, when the distance of the basement storey floor from the entry level exceeds 14 metres.",{'ID': '254_Finnish_FireSafety'},"A building shall be provided with a permanently installed dry riser that is suitable for its purpose for transporting water for fire extinguishing: 1) in the premises above the entry level of the building, when the distance of the uppermost floor level from the entry level exceeds 24 metres; 2) in the <e1>premises</e1> <e2>below the entry level of the building</e2>, when the distance of the basement storey floor from the entry level exceeds 14 metres.",selection,annotated
+dcc583b1-8c4c-42cf-a1ed-e8907de56254_10,,,"The <e1>intermediate landing</e1> of the indoor steps of other spaces intended for everyday use may be no more than <e2>8 per cent (1:12.5)</e2>, and the tread must be no less than 270 millimetres.",less-equal,synthetic
+082c7ed9-3579-48c2-a0d2-076f1edd647c_3,,,"Each of the <e1>90mm</e1> <e2>above</e2> of the centrally hinged window should be assessed as a single side, bottom or top hung window.",equal,synthetic
+cb531516-b36e-4155-a8fa-5114e3e71dbc,The insulant should be chosen to achieve the lowest practicable U-value.,{'ID': '129_UK_DocL_V1_ConsrvationOfFuelAndPower'},The <e1>insulant</e1> should be <e2>chosen to achieve the lowest practicable U-value</e2>.,necessity,annotated
+56517433-cf40-4b88-a9d4-18e61e0e9993_8,,,"In addition, on both sides of the toilet seat there shall be a <e1>electric resistance heating</e1> of at least <e2>8 per cent (1:12.5)</e2>.",greater-equal,synthetic
+208b093d-361f-4aec-819d-4abca4e72c68,"in an evacuation area where the maximum number of occupants is 60, the second exit may be no less than 900 millimetres in width.",{'ID': '216_Finnish_FireSafety'},"in an <e1>evacuation area</e1> where the maximum number of occupants is 60, the second <e2>exit</e2> may be no less than 900 millimetres in width.",part-of,annotated
+bb9ec292-062b-43c3-8590-856dd5f6b890_2,,,"The <e1>patterns</e1> and building emission rate calculated using the measured air permeability must not be higher than the <e2>edges</e2> and target emission rate, respectively.",less-equal,synthetic
+40b40b1b-d1b1-49d8-b9b7-13c5845a169d_7,,,The structure of the control appliance of the plumbing fixture shall be such that its <e1>capacity</e1> does not arise above <e2>30</e2>.,less-equal,synthetic
+f439dcde-3cf9-4b40-b555-a2107ae5559f,"If  the  circulation  piping  is  located inside the building envelope, 50 of the calculated domestic hot water circulation heat loss shall  be  added  to  the  thermal  load  of  the  spaces  of  the  building.",{'ID': '104_Finnish_EnergyEfficiency'},"If the <e1>circulation piping</e1> is located inside the building envelope, <e2>50</e2> of the calculated domestic hot water circulation heat loss shall be added to the thermal load of the spaces of the building.",none,annotated
+5577528f-8fa0-4ca3-96f6-ea418091cb86_9,,,The side edges of stairs and landings must be fitted with a raised camber to prevent slipping over the edge if a cube measuring more than <e1>01:08:00</e1> in <e2>lengths</e2> is able to pass through the opening between the plane level and the handrail or wall.,greater,synthetic
+203faa23-7b71-47c9-a6e5-2333ac45389e_8,,,"The riser of the indoor steps of dwelling units and living quarters may be no more than 190 millimetres, and the <e1>design solar load</e1> must be no less than <e2>400 millimetres</e2>.",greater-equal,synthetic
+569c7958-b7d6-4b9c-9dd9-13307e95e59b,"For ducted systems that are served by fans with a design flow rate greater than 1m3/s, ductwork leakage tests should be carried out.",{'ID': '385_UK_DocM_V2_AccessAndUseOfBuildings'},"For ducted systems that are served by fans with a design flow rate greater than 1m3/s, <e1>ductwork leakage tests</e1> should be <e2>carried out</e2>.",necessity,annotated
+922bf8df-3a70-4f45-8c04-200b638d3b3c_11,,,The cold water pipe shall be designed and installed so that the <e1>breaking</e1> in the cold water system may not exceed <e2>8 per cent (1:12.5)</e2>.,less-equal,synthetic
+0da52584-1b37-48b5-840f-3795ae695275_7,,,the minimum clear dimensions of the platform are: 1100mm wide and <e1>25 decibels</e1> <e2>boiler efficiency</e2> where two doors are located at 90° relative to each other and where the lifting platform is enclosed or where provision is being made for an accompanied wheelchair user.,equal,synthetic
+4094b859-b3b4-4035-94cd-8cf47ccbd801_7,,,The <e1>distance of the uppermost floor level from the entry level</e1> is at least <e2>eight per cent</e2>.,greater-equal,synthetic
+7c74b365-6fdd-494d-9675-3ae036c55348,Ladders and other structural elements at emergency exits and service routes must be designed and constructed so that they can also be used in an emergency situation.,{'ID': '82_Finnish_SafetyOfUse'},Ladders and other <e1>structural elements</e1> at emergency exits and <e2>service routes</e2> must be designed and constructed so that they can also be used in an emergency situation.,part-of,annotated
+0aad98a7-74e6-4678-9620-2f80355e7ba8,commissioning notice must be given to the building control body.,{'ID': '94_UK_DocF_V2_Ventilation'},<e1>commissioning notice</e1> must be <e2>given to the building control body</e2>.,necessity,annotated
+7f696221-52c9-4c52-8f90-74bd93c51299_6,,,This grippable handrail is 850-1000mm above the pitch line of the flight and <e1>output</e1> at least <e2>70 kN</e2> beyond the top and bottom nosings.,greater-equal,synthetic
+98ef7ffc-fba9-439f-ab36-5fd6fd1d8e0f,Complex details should be avoided wherever possible.,{'ID': '154_UK_DocL_V1_ConsrvationOfFuelAndPower'},<e1>Complex</e1> <e2>details</e2> should be avoided wherever possible.,selection,annotated
+6414854d-01f9-481f-a7f4-c4581e48d8b1_3,,,Special safety features are not necessary if the <e1>Manual controls</e1> is not more than <e2>35 mg/m3 (30 ppm)</e2> long.,less-equal,synthetic
+35cacecf-06dc-4b0f-aadb-db2ee05518c7_10,,,The area of windows and roof windows (but excluding display windows) <e1>commissioned to ensure that they produce as much electricity as is reasonable in the circumstances</e1> exceeds <e2>100</e2> of the facade area.,greater,synthetic
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. <e1>toilet facility</e1> <e2>intended for public use</e2>; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",selection,annotated
+2f815a08-db3c-48a6-b248-d69aeac870ee,"the vertical travel distance is: a. not more than 2m, where there is no liftway enclosure and no floor penetration; b. more than 2m, where there is a liftway enclosure.",{'ID': '173_UK_DocM_V2_AccessAndUseOfBuildings'},"the vertical travel distance is: a. not more than 2m, where there is no liftway enclosure and no floor penetration; b. more than <e1>2m</e1>, <e2>where there is a liftway enclosure</e2>.",selection,annotated
+2633c957-07b4-4caa-a9d6-5acbac16b0b0,NOTE: Linear interpolation should be used to determine efficiencies between manufacturers declared efficiencies at 30 and 100 load.,{'ID': '245_UK_DocM_V2_AccessAndUseOfBuildings'},NOTE: Linear interpolation should be used to determine efficiencies between <e1>manufacturers declared efficiencies</e1> at <e2>30</e2> and 100 load.,none,annotated
+5b1fe636-d2aa-4382-885e-a4f8a2cae4d4_1,,,"Generally, a thermal element once upgraded should not have a <e1>building emission rate</e1> greater than <e2>1,500  millimetres</e2>.",less-equal,synthetic
+7c74b365-6fdd-494d-9675-3ae036c55348,Ladders and other structural elements at emergency exits and service routes must be designed and constructed so that they can also be used in an emergency situation.,{'ID': '82_Finnish_SafetyOfUse'},Ladders and other structural elements at <e1>emergency exits</e1> and service routes must be <e2>designed and constructed</e2> so that they can also be used in an emergency situation.,none,annotated
+2de867fe-80e7-4617-ad18-36225dd45ab1,Hinged or pivot windows with an opening angle of less than 15 degrees are not suitable for purge ventilation.,{'ID': '53_UK_DocF_V1_Ventilation'},Hinged or <e1>pivot</e1> <e2>windows</e2> with an opening angle of less than 15 degrees are not suitable for purge ventilation.,selection,annotated
+726e23c9-02a3-4c56-98d0-8981b7ce877b,"In the construction of a new building as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",{'ID': '126_Finnish_Health-WaterAndSewerage'},"In the construction of a <e1>new</e1> <e2>building</e2> as well as in repair and alteration work corresponding to the construction of a new building, the premises to be fitted with a floor drain shall be: 1. showers and bathrooms as well as wash rooms in connection with saunas; 2. laundry room; 3. heat distribution room; 4. ventilation unit room; 5. toilet facility intended for public use; 6. technical utility room with a possibility to water damage; 7. car wash facility; 8. special facilities cleansed by water rinsing.",selection,annotated
+60024014-cb6a-4a53-9b12-9497e0a1e5e8,"Extract air from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the total extract air flow from these spaces does not exceed 10 of the total air flow in the vertical duct.",{'ID': '85_Finnish_Health-IndoorClimateAndVentilation'},"<e1>Extract air</e1> from toilets, washrooms and cleaning spaces may be conducted to vertical ducts for extract air categories 1 and 2 if the total extract air flow from these spaces does not exceed 10 of the <e2>total air flow</e2> in the vertical duct.",none,annotated
+c0a6d35c-cc20-428b-941d-c3e3e6365c74_11,,,"In a tier that is uninterrupted by cross-gangways, and where the <e1>luminous efficacy</e1> exceeds <e2>200 millimetres</e2>, use a maximum number of steps of 40.",greater,synthetic
+56b3f993-37b5-4cb1-9540-432972f8056e,"In a mechanical ventilation system, the air handling units and chambers shall be able to withstand the loads caused by fan pressure while the shutoff dampers are closed.",{'ID': '99_Finnish_Health-IndoorClimateAndVentilation'},"In a mechanical <e1>ventilation system</e1>, the <e2>air handling units</e2> and chambers shall be able to withstand the loads caused by fan pressure while the shutoff dampers are closed.",part-of,annotated
+7e34700e-92de-4b00-a820-f4085a2e186c,"If the free gap between facing walls of adjacent glazed balconies or the distance of the wall to the window of an adjacent fire compartment is less than 2 metres, the wall in question must be class EI 15.",{'ID': '135_Finnish_FireSafety'},"If the free gap between facing walls of adjacent glazed balconies or the <e1>distance</e1> of the <e2>wall to the window of an adjacent fire compartment</e2> is less than 2 metres, the wall in question must be class EI 15.",selection,annotated
+525aa713-65e1-4368-a6f4-38f628be7fed,"in clothes shops, the dimensions and fittings recommended for an individual changing cubicle in a sports building should be provided.",{'ID': '177_UK_DocM_V2_AccessAndUseOfBuildings'},"in <e1>clothes shops</e1>, the <e2>dimensions</e2> and fittings recommended for an individual changing cubicle in a sports building should be provided.",none,annotated
+d0927095-9e43-4ce4-a740-d5df69dc1dc3,"If the air flows of extract air categories 1 and 2 are combined into the same duct and category 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",{'ID': '84_Finnish_Health-IndoorClimateAndVentilation'},"If the air flows of <e1>extract air categories</e1> 1 and 2 are combined into the same duct and <e2>category</e2> 2 air flow accounts for more than 10 of the combined air flow, the combined air flow is classified under category 2.",none,annotated
+52de82bc-2c00-4500-81ec-a46781a8e4e7,Automatic control of input charge should be provided.,{'ID': '279_UK_DocL_V1_ConsrvationOfFuelAndPower'},Automatic <e1>control</e1> of <e2>input charge</e2> should be provided.,necessity,annotated
+fab95d95-4789-4384-8d57-a575190f9e73,The heating plant emission rate of the micro combined heat and power system (microCHP) should be no greater than the emission rate of a regular boiler using the same fuel as the microCHP.,{'ID': '297_UK_DocL_V1_ConsrvationOfFuelAndPower'},The heating plant emission rate of the micro combined heat and power system (microCHP) should be no greater than the <e1>emission rate</e1> of a regular <e2>boiler</e2> using the same fuel as the microCHP.,part-of,annotated
+656aa2fa-18cb-41ee-ae28-28deb3dffcc3,The water temperature of the water in the hot water system shall be at least 55 degrees Celsius and available from the hot water plumbing fixture within 20 seconds.,{'ID': '61_Finnish_Health-WaterAndSewerage'},The water temperature of the water in the hot water system shall be at least <e1>55 degrees Celsius</e1> and <e2>available from the hot water plumbing fixture within 20 seconds</e2>.,none,annotated
+11f2902d-29c2-474e-97d0-628a2a97a666_9,,,"<e1>control capabilities</e1> of over <e2>0.3</e2> must be equipped with an appropriate safety barrier, railing or handrail.",greater,synthetic
+2c12675d-93c9-496a-acf9-b30465dae93d,Any flexible ducts should be installed so that the full internal diameter is maintained and flow resistance is minimised.,{'ID': '113_UK_DocF_V1_Ventilation'},Any <e1>flexible</e1> <e2>ducts</e2> should be installed so that the full internal diameter is maintained and flow resistance is minimised.,selection,annotated
+35cacecf-06dc-4b0f-aadb-db2ee05518c7_1,,,The area of windows and roof windows (but excluding display windows) <e1>practical</e1> exceeds <e2>off</e2> of the facade area.,greater,synthetic
+3121fe90-27db-405e-a42a-df3cd22ee176_4,,,"Where necessary, <e1>390 millimetres</e1><e2>rafters</e2>, one above the other, must be installed in order to take into account children and users of wheelchairs.",equal,synthetic
+7c44934c-61e1-4904-a493-1aa360ccc7d1,"The building shall be constructed so that the combined dead,imposed and wind loads are sustained and transmitted by it to the ground: (a) safely; and (b) without causing such deflection or deformation of any part of the building, or such movement of the ground, as will impair the stability of any part of another building.",{'ID': '1_UK_DocA_Structure'},"The <e1>building</e1> shall be <e2>constructed</e2> so that the combined dead,imposed and wind loads are sustained and transmitted by it to the ground: (a) safely; and (b) without causing such deflection or deformation of any part of the building, or such movement of the ground, as will impair the stability of any part of another building.",necessity,annotated
+569c7958-b7d6-4b9c-9dd9-13307e95e59b_10,,,"For ducted systems that are served by fans with a <e1>ending</e1> greater than <e2>1,500  millimetres</e2>, ductwork leakage tests should be carried out.",greater,synthetic
+31d635b2-1d32-49dd-a848-5b5acaf50128,"For existing dwellings, when installing a complete new or replacement system (e.g. replacing a heating system including the heating appliance, pipework and heat emitters), the energy performance of the whole system should be assessed.",{'ID': '407_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For <e1>existing</e1> <e2>dwellings</e2>, when installing a complete new or replacement system (e.g. replacing a heating system including the heating appliance, pipework and heat emitters), the energy performance of the whole system should be assessed.",selection,annotated
+5e7d4831-4ec8-48f9-9e60-0422fcc1eae4_2,,,"When replacing an existing system, the <e1>control capabilities</e1> of the new system should be no less than <e2>value</e2> of the existing system, except where a smaller system can be demonstrated to be more appropriate or effective (e.g. replacing an existing system with one which is better matched to the dwelling's energy demand).",greater-equal,synthetic
+99a53f17-48cb-4012-a47b-700761e0983b_11,,,Where a new building which is not a residential building or a mixed-use building has more than 10 parking spaces (a) <e1>2</e1> of those <e2>casings</e2> must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.,equal,synthetic
+1ebce0c9-705c-47ee-8429-e83cfbed72db,"All walls, ducts and boxings to every WC/cloakroom, bath and shower room are strong enough to support grab rails, seats and other adaptations that could impose a load of 1.5kN/m2.",{'ID': '103_UK_DocM_V1_AccessAndUseOfBuildings'},"All walls, <e1>ducts</e1> and boxings to every WC/cloakroom, bath and <e2>shower room</e2> are strong enough to support grab rails, seats and other adaptations that could impose a load of 1.5kN/m2.",part-of,annotated
+81314489-dcd9-410f-9b15-595b87e7c8f9_10,,,"The resilient layer should be timber sheathing at least <e1>EI 15</e1> <e2>size</e2>, expanded metal or a similar resilient material.",greater-equal,synthetic
+5869233a-4fc0-48bf-9007-2b0c9a169fef,"A building shall, if its size, number of storeys or an intended purpose of a premises within the building so requires, be divided into fire compartments in order to restrict the spread of fire and smoke, to provide safe evacuation and to facilitate rescue and extinguishing measures.",{'ID': '100_Finnish_FireSafety'},"A building shall, if its size, number of storeys or an intended purpose of a premises within the building so requires, be <e1>divided into fire compartments</e1> in order to restrict the spread of fire and smoke, to <e2>provide safe evacuation</e2> and to facilitate rescue and extinguishing measures.",selection,annotated
+ccc405a0-c6d6-4ace-ad70-e0cfe07cd1e3,"Stairs, ladders and ramps shall be so designed, constructed and installed as to be safe for people moving between different levels in or about the building.",{'ID': '14_UK_DocK_ProtectionFromFalling'},"<e1>Stairs</e1>, ladders and <e2>ramps</e2> shall be so designed, constructed and installed as to be safe for people moving between different levels in or about the building.",none,annotated
+2afa8bba-b5ad-4e12-bc27-4beea3fd09b2_0,,,The normal relationship between the dimensions of the rise and going is: <e1>30% load</e1> equals <e2>15 degrees</e2>.,equal,synthetic
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",{'ID': '75_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the <e1>cost</e1> of that installation exceeds <e2>7%</e2> of the total cost of the major renovation.",greater,annotated
+b51c7a9f-2080-4e60-940f-e59af0cc97ce,"The buildings enclosure together with its construction layers and joints must form a whole, preventing the transfer of water across the surface of the enclosure into the construction by wind, slanting rain and wind pressure.",{'ID': '34_Finnish_Health-Humidity'},"The <e1>buildings</e1> enclosure together with its construction layers and <e2>joints</e2> must form a whole, preventing the transfer of water across the surface of the enclosure into the construction by wind, slanting rain and wind pressure.",none,annotated
+1913381b-a2cc-496e-9168-82ccf2a01d50_10,,,"In connection with repair and alteration work, the heat emitters connected to the domestic hot water ring duct may be replaced so that the <e1>air-tightness</e1> of the heat emitters to be installed does not exceed <e2>18 dm3/s</e2>.",less-equal,synthetic
+cb2f2c09-8ae6-42a4-ac21-861c912c30f9,"In buildings more than 9 metres and at most 28 metres in height, the attic and roof must be accessible via the interior and exterior of the building; in buildings more than 28 metres in height, these must be accessible via the interior.",{'ID': '126_Finnish_SafetyOfUse'},"In buildings more than 9 metres and at most 28 metres in height, the <e1>attic</e1> and roof must be accessible via the interior and exterior of the building; in <e2>buildings</e2> more than 28 metres in height, these must be accessible via the interior.",part-of,annotated
+d48274a1-bd70-4db9-8490-14075029cbb7,All users including wheelchair users should be able to reach and use the controls that summon and direct the lifting device.,{'ID': '109_UK_DocM_V2_AccessAndUseOfBuildings'},All <e1>users</e1> including <e2>wheelchair users</e2> should be able to reach and use the controls that summon and direct the lifting device.,part-of,annotated
+0a7ff0c7-c5f9-4069-9d7e-2bfd6c4871d3_4,,,The <e1>total minimum width</e1> of the extension does not exceed <e2>600kg/m3</e2>.,less-equal,synthetic
+0cfe8c0e-45e4-4c4c-bf9b-906e26e28c75,"There should be sufficient space for people to approach the building, pass others who are travelling in the opposite direction and carry out all necessary manoeuvres.",{'ID': '43_UK_DocM_V2_AccessAndUseOfBuildings'},"There should be sufficient space for <e1>people</e1> to approach the building, pass others who are travelling in the opposite direction and <e2>carry out all necessary manoeuvres</e2>.",none,annotated
+2633c957-07b4-4caa-a9d6-5acbac16b0b0,NOTE: Linear interpolation should be used to determine efficiencies between manufacturers declared efficiencies at 30 and 100 load.,{'ID': '245_UK_DocM_V2_AccessAndUseOfBuildings'},NOTE: Linear interpolation should be used to determine efficiencies between manufacturers declared efficiencies at 30 and <e1>100</e1> <e2>load</e2>.,equal,annotated
+bfe386ee-8c0b-41d4-9967-6e873edf7229,"Floors and foundations: insulation should be installed tight to the structure, without air gaps between insulation panels and at edges.",{'ID': '148_UK_DocL_V1_ConsrvationOfFuelAndPower'},"<e1>Floors</e1> and foundations: <e2>insulation</e2> should be installed tight to the structure, without air gaps between insulation panels and at edges.",part-of,annotated
+3724fd47-22f7-432c-81a2-1abcb95c7df2_6,,,"The total number of ventilators installed in a dwellings habitable rooms and kitchens should be no fewer than five, except in <e1>200 m2</e1> <e2>morticed bolts</e2> properties, where there should be no fewer than four.",equal,synthetic
+da4d5959-6e64-4e04-a1f3-8b42b6addab0_2,,,The outdoor <e1>drop</e1> used in the calculations for buildings other than those in intended use categories 1 and 2 outside the occupancy period shall be at least <e2>1.3 seconds</e2>.,greater-equal,synthetic
+e43c1e88-be80-42d9-944e-1bf0f0f82479_7,,,Individual flights are: for gradients up to 1:15 not more than 10m long; for gradients up to 1:12 not more than <e1>300 millimetres</e1> <e2>travel distance</e2>.,less-equal,synthetic
+7c8f6c05-769d-46a8-9dc6-84b509bf8d9c,"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding two storeys is EI 30; however, minor sealing parts and penetrations may be class E 15.",{'ID': '134_Finnish_FireSafety'},"The fire compartmenting requirement for the balcony slab of a glazed balcony of a building exceeding two storeys is EI 30; however, <e1>minor</e1> <e2>sealing parts</e2> and penetrations may be class E 15.",selection,annotated
+9ff8b8fd-5361-4c3d-9a7e-7459276c8df7_4,,,The <e1>temperature</e1> must not exceed the individual dwellings <e2>tie force</e2>.,less-equal,synthetic
+64f259ba-5280-4bf5-bea2-e18cb837a940,A water point shall incorporate a drainage point that is connected to the sewer via a drainage fixture.,{'ID': '124_Finnish_Health-WaterAndSewerage'},A water point shall incorporate a <e1>drainage point</e1> that is <e2>connected to the sewer via a drainage fixture</e2>.,selection,annotated
+6075de3c-d339-4ba4-9945-990480975615,"Where a kitchen and living room accommodation are not separate rooms (i.e. open plan), no fewer than three ventilators of the same equivalent area as for other habitable rooms should be provided within the open-plan space.",{'ID': '94_UK_DocF_V1_Ventilation'},"Where a kitchen and living room accommodation are not separate rooms (i.e. open plan), no fewer than <e1>three</e1> ventilators <e2>of the same equivalent area as for other habitable rooms</e2> should be provided within the open-plan space.",none,annotated
+86350df0-a40e-412b-a301-004524d56736,"For wet heating systems in new dwellings with a floor area of 150m2 or greater, a minimum of two independently controlled heating circuits should be provided.",{'ID': '246_UK_DocL_V1_ConsrvationOfFuelAndPower'},"For wet heating systems in new <e1>dwellings</e1> with a floor area of 150m2 or greater, a minimum of two <e2>independently controlled</e2> heating circuits should be provided.",none,annotated
+5f675f4f-74de-4d0f-ae92-c3500d2d952e,The actual equivalent area and location of installed background ventilators should be recorded.,{'ID': '189_UK_DocF_V1_Ventilation'},The actual <e1>equivalent area</e1> and location of installed background ventilators should be <e2>recorded</e2>.,necessity,annotated
+01008f69-874b-443e-bcb2-2f5630280049_11,,,"If stairs are used only as an emergency exit and if they lead to spaces in a dwelling or accommodation facility other than those that are necessary for living, the <e1>Extract</e1> may be no more than <e2>150m2</e2> and the tread must be no less than 220 millimetres.",less-equal,synthetic
+1d10aa43-7650-46b1-83c3-867f212ab9c3,Background ventilators should meet the performance standards for both of the following: a. air flow from outside to inside the dwelling; b. air flow from inside the dwelling to outside.,{'ID': '58_UK_DocF_V1_Ventilation'},<e1>Background ventilators</e1> should meet the <e2>performance standards</e2> for both of the following: a. air flow from outside to inside the dwelling; b. air flow from inside the dwelling to outside.,necessity,annotated
+0096a3bf-ac16-4a75-adf9-8c3f4a9b8610_10,,,The smaller <e1>frequency</e1> of each panel which can be either the width or height of the panel should be <e2>0.3W/m2</e2> or less.,less-equal,synthetic
+ef561e39-db90-462c-8dde-15fbeae954e5_7,,,A cube with <e1>extends</e1> of no more than <e2>28 metres</e2> may pass between the upper edge of the barrier and the protective part.,less-equal,synthetic
+5b4380ba-0066-4735-a362-316d4c8e70b2,"Where a building undergoing major renovation, which is not a residential building or a mixeduse building, will have more than 10 parking spaces after the major renovation is completed (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.",{'ID': '73_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"Where a building undergoing major renovation, which is not a residential building or a mixeduse building, will have more than 10 parking spaces <e1>after the major renovation is completed</e1> (a) one of those parking spaces must have access to one electric vehicle charge point; and (b) <e2>cable routes</e2> for electric vehicle charge points must be installed in a minimum of one fifth of the total number of remaining parking spaces.",none,annotated
+7d35f4c4-fa65-4d68-a974-f54386ca8aee,"However, a horizontal gap in a protective part must be no higher than ten millimetres.",{'ID': '49_Finnish_SafetyOfUse'},"However, a <e1>horizontal</e1> <e2>gap</e2> in a protective part must be no higher than ten millimetres.",selection,annotated
+ded852b5-c826-4649-8ce5-dece0eba6061,"During the design period of occupancy, a building's room temperature shall be comfortable and not adversely affected by air velocity, thermal radiation, temperature fluctuation, temperature differences or surface temperatures.",{'ID': '32_Finnish_Health-IndoorClimateAndVentilation'},"<e1>During the design period of occupancy</e1>, a building's room temperature shall be <e2>comfortable</e2> and not adversely affected by air velocity, thermal radiation, temperature fluctuation, temperature differences or surface temperatures.",none,annotated
+103f99ad-884b-4bae-9f22-ccb1c5bc3d26_8,,,"In an open garage of no more than <e1>900-1000mm</e1> <e2>test data</e2>, the maximum area may be used as the surface area of the storeys, even though the driveways between the various storeys are combined.",less-equal,synthetic
+84cd76d7-e5d0-4f39-94bc-0236c65d533a_7,,,"in residential buildings of not more than two storeys, one exit of no less than <e1>650mm</e1> in <e2>selection</e2> is permitted.",greater-equal,synthetic
+c0a6d35c-cc20-428b-941d-c3e3e6365c74,"In a tier that is uninterrupted by cross-gangways, and where the pitch exceeds 25, use a maximum number of steps of 40.",{'ID': '25_UK_DocK_ProtectionFromFalling'},"In a tier that is <e1>uninterrupted by cross-gangways</e1>, and where the pitch exceeds 25, use a <e2>maximum</e2> number of steps of 40.",none,annotated
+f034fbd1-7547-425a-8163-513fcac0b66b,The roof structures and joints must be properly inclined and sealed for water drainage.,{'ID': '103_Finnish_Health-Humidity'},The <e1>roof structures</e1> and joints must be properly inclined and <e2>sealed for water drainage</e2>.,necessity,annotated
+e1f1aeb9-7453-4b6b-b3f1-6049d711868a,The fire performance of the external wall structure of a building no more than 56 metres in height may also be demonstrated by a fullscale test.,{'ID': '156_Finnish_FireSafety'},The fire performance of the external <e1>wall structure</e1> of a building no more than 56 metres in <e2>height</e2> may also be demonstrated by a fullscale test.,none,annotated
+dcc583b1-8c4c-42cf-a1ed-e8907de56254,"The rise of the indoor steps of other spaces intended for everyday use may be no more than 180 millimetres, and the tread must be no less than 270 millimetres.",{'ID': '23_Finnish_SafetyOfUse'},"The rise of the indoor steps of other spaces intended for everyday use may be no more than <e1>180 millimetres</e1>, and the tread must be no less than <e2>270 millimetres</e2>.",none,annotated
+49c6fd15-70a9-4733-8de8-8dd2fe49fe0a,"If renewable technology such as a wind turbine or photovoltaic array is replaced, the new system should have an electrical output that is at least the same as that of the original installation.",{'ID': '231_UK_DocL_V1_ConsrvationOfFuelAndPower'},"If <e1>renewable technology</e1> such as a <e2>wind turbine</e2> or photovoltaic array is replaced, the new system should have an electrical output that is at least the same as that of the original installation.",selection,annotated
+3c0a8ccb-d813-40fb-b69b-88250d3bc4ec_6,,,These fittings should not exceed a <e1>rise between landings</e1> of <e2>8.5m2</e2>.,less-equal,synthetic
+a372d2c4-f734-479d-bc8d-d3a8aa15362d,"A wide range of people, including accompanied wheelchair users, should be able to access and use the lift.",{'ID': '49_UK_DocM_V1_AccessAndUseOfBuildings'},"A <e1>wide range</e1> of <e2>people</e2>, including accompanied wheelchair users, should be able to access and use the lift.",selection,annotated
+3cbfb816-4071-496e-aec2-87d424df047f,Wheelchair users and ambulant disabled people should be able to wash or bathe either independently or with assistance from others.,{'ID': '181_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>Wheelchair users</e1> and ambulant disabled people should be <e2>able to wash or bathe either independently or with assistance from others</e2>.,necessity,annotated
+4e8c5c50-44af-48f6-b959-e6f9b31afa1e,"If the planned time of use of a modular or portable building in a single location is less than two years, the only practical heating technology may be electric resistance heating.",{'ID': '89_UK_DocM_V2_AccessAndUseOfBuildings'},"If the planned time of use of a modular or portable building in a single location is less than two years, the only <e1>practical</e1> <e2>heating technology</e2> may be electric resistance heating.",selection,annotated
+d3fc8c9b-c23a-4188-8723-369caa90453c_1,,,"The <e1>illuminance</e1> for a building's total combined window area is <e2>90</e2> of the sum total of the floor plate areas of the buildings storeys that are fully or in part above the ground but, however, at most 50 of the building's facade area.",equal,synthetic
+bed3cb74-fdd3-4888-80ab-b416d1b060ad,"For systems that have the ability to use free cooling or heat recovery, the SEER should be derived for the specific application, including free cooling or heat recovery elements.",{'ID': '282_UK_DocM_V2_AccessAndUseOfBuildings'},"For systems that <e1>have the ability to use free cooling or heat recovery</e1>, the <e2>SEER</e2> should be derived for the specific application, including free cooling or heat recovery elements.",none,annotated
+6ec243f2-9294-4b7c-89a4-1c46e4a69cc9,"If site constraints necessitate an approach of 1:20 or steeper, an approach incorporating ramped access should be provided.",{'ID': '49_UK_DocM_V2_AccessAndUseOfBuildings'},"If site <e1>constraints</e1> necessitate an <e2>approach</e2> of 1:20 or steeper, an approach incorporating ramped access should be provided.",necessity,annotated
+bb9ec292-062b-43c3-8590-856dd5f6b890_0,,,"The building primary energy rate and <e1>rise</e1> calculated using the measured air permeability must not be higher than the target primary energy rate and <e2>efficiencies</e2>, respectively.",less-equal,synthetic
+7faab614-f3bc-41b4-9dbf-0ff2b3ea56f3_5,,,"Where the cost of installing only cable routes is more than 7% of the total cost of the major <e1>timber sheathing</e1>, there is no <e2>battery storage</e2> to install either electric vehicle charge points or cable routes.",not-part-of,synthetic
+d3e7a947-536e-4a49-9823-e27fc0f68b27_4,,,<e1>performance</e1> of landings to be at least equal to the <e2>extract air categories</e2> of the ramp.,greater-equal,synthetic
+2f8d4247-e53b-49ae-bd26-c4f1765eaee8_2,,,"Extract air of <e1>habitable area</e1> 2, 3 and <e2>13l/s</e2> shall not be used as recirculation air.",equal,synthetic
+0667134c-1290-4fe0-99eb-41c0b9e63a27,CO2 emissions and primary energy associated with the thermal energy streams of a trigeneration scheme should be attributed in proportion to the output energy streams.,{'ID': '67_UK_DocM_V2_AccessAndUseOfBuildings'},<e1>CO2 emissions</e1> and primary energy associated with the <e2>thermal energy streams</e2> of a trigeneration scheme should be attributed in proportion to the output energy streams.,part-of,annotated
+a387fcb8-ead2-4094-9be9-72d783468b33_8,,,"If the <e1>fire igniting</e1> of windows, roof windows, rooflights and doors exceeds <e2>300 millimetres</e2> of the total floor area of the dwelling, compensating measures should be taken to improve the energy efficiency of the dwelling.",greater,synthetic
+40b40b1b-d1b1-49d8-b9b7-13c5845a169d,The structure of the control appliance of the plumbing fixture shall be such that its surface temperature does not arise above 40 degrees Celsius.,{'ID': '71_Finnish_Health-WaterAndSewerage'},The structure of the <e1>control appliance</e1> of the <e2>plumbing fixture</e2> shall be such that its surface temperature does not arise above 40 degrees Celsius.,part-of,annotated
+103f99ad-884b-4bae-9f22-ccb1c5bc3d26,"In an open garage of no more than five storeys, the maximum area may be used as the surface area of the storeys, even though the driveways between the various storeys are combined.",{'ID': '110_Finnish_FireSafety'},"In an <e1>open</e1> <e2>garage</e2> of no more than five storeys, the maximum area may be used as the surface area of the storeys, even though the driveways between the various storeys are combined.",selection,annotated
+3121fe90-27db-405e-a42a-df3cd22ee176_7,,,"Where necessary, <e1>4</e1><e2>information</e2>, one above the other, must be installed in order to take into account children and users of wheelchairs.",equal,synthetic
+6a41a473-bd3c-4e38-a093-094b3fdae388_3,,,At least one in every <e1>600kg/m3</e1> remaining <e2>drainage water</e2> must be provided with cable routes.,equal,synthetic
+2afa8bba-b5ad-4e12-bc27-4beea3fd09b2_3,,,The normal relationship between the <e1>side edges</e1> of the rise and going is: <e2>50 m2</e2> equals between 550mm and 700mm.,equal,synthetic
+7d877df3-9aa7-4dff-a64d-5356a66c944d_9,,,"In public outdoor and indoor spaces, and in business and service premises, a handrail must continue at least 300 millimetres past the start and end points of the structure, and in the case of stairs or ramps that have a <e1>rated output</e1> exceeding <e2>0.15 dm3/s per m2</e2> and are located in assembly areas, it must also be placed so as to divide the passageway into parts no wider than the abovementioned width.",greater,synthetic
+d5b6ff18-626d-4e6f-b788-0c67f7a4ebab,"If the cost of installing the required electric vehicle charge point and cable routes for electric vehicle charge points exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) cable routes for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",{'ID': '75_UK_DocS_InfrastructureForChargingOfElectricalVehicles'},"If the cost of <e1>installing the required electric vehicle charge point and cable routes for electric vehicle charge points</e1> exceeds 7% of the total cost of the major renovation (a) such a building is exempt from the requirement to install the electric vehicle charge point; and (b) <e2>cable routes</e2> for electric vehicle charge points must be installed in a minimum of one fifth of the total number of parking spaces, except where the cost of that installation exceeds 7% of the total cost of the major renovation.",none,annotated
+d3e7a947-536e-4a49-9823-e27fc0f68b27_9,,,<e1>standards</e1> of landings to be at least equal to the <e2>selection</e2> of the ramp.,greater-equal,synthetic
+a477ee34-044e-443b-a95f-fbb1da913c38,"Changing places toilets, facilities designed for individuals with complex and multiple impairments who may require the assistance of up to two assistants, should be provided in addition to any wheelchair-accessible accommodation in separate-sex toilet washrooms, wheelchair-accessible unisex toileting facilities and baby changing facilities.",{'ID': '160_UK_DocM_V2_AccessAndUseOfBuildings'},"Changing places toilets, facilities designed for individuals with complex and multiple impairments who may require the assistance of up to two assistants, should be provided in addition to any wheelchair-accessible <e1>accommodation</e1> in separate-sex toilet washrooms, wheelchair-accessible unisex toileting facilities and <e2>baby changing facilities</e2>.",part-of,annotated
+f64c5a32-2f88-4be6-abf4-8870a4e51fdf,"The use of recirculation, transfer or secondary air shall not cause any harmful spread of impurities, in particular odours.",{'ID': '72_Finnish_Health-IndoorClimateAndVentilation'},"The use of recirculation, transfer or secondary <e1>air</e1> shall <e2>not cause any harmful spread of impurities, in particular odours</e2>.",necessity,annotated
+981a0996-c526-4ee7-b679-0f17bd5ecd29,"Where it is not feasible to install a space heating system that can operate at this temperature (e.g. where there is insufficient space for larger radiators, or the existing distribution system is provided with higher temperature heat from a low carbon district heat network), the space heating system should be designed to the lowest design temperature possible that will still meet the heating needs of the building.",{'ID': '209_UK_DocM_V2_AccessAndUseOfBuildings'},"Where it is not feasible to install a <e1>space heating system</e1> that <e2>can operate at this temperature</e2> (e.g. where there is insufficient space for larger radiators, or the existing distribution system is provided with higher temperature heat from a low carbon district heat network), the space heating system should be designed to the lowest design temperature possible that will still meet the heating needs of the building.",selection,annotated
+ff3e8f86-1542-4f54-a776-cfdc8482bad7_1,,,The <e1>rise between landings</e1> of an air conditioner working in cooling mode should be a minimum of <e2>1.3 seconds</e2>.,greater-equal,synthetic
+38020928-c137-486e-88d7-c8feec038c99,A building must be provided with a fire wall if it is situated adjacent to a neighbouring building or so close to a neighbouring building that the spread of fire is evident.,{'ID': '189_Finnish_FireSafety'},A <e1>building</e1> must be provided with a <e2>fire wall</e2> if it is situated adjacent to a neighbouring building or so close to a neighbouring building that the spread of fire is evident.,necessity,annotated
+b63dcef6-1840-4e9e-ad51-f8fc481fe856_7,,,"The wall ties should have a horizontal spacing of 900mm and a vertical spacing of 450mm, or alternatively should be spaced such that the <e1>intended purpose</e1> is not less than <e2>75 light source lumens per circuit-watt</e2>.",greater-equal,synthetic
+f3bd99b4-7ea5-4968-af10-3c133c0b5aa0_1,,,No individual flight has a <e1>level differences</e1> of more than <e2>30</e2>.,less-equal,synthetic
+a1f91cfd-21f8-49a4-8468-746f49f4848e_6,,,"For a building that contains more than <e1>2.4m</e1> <e2>roof windows</e2> for example a block of flats or a terrace of houses an average target primary energy rate, target emission rate and target fabric energy efficiency rate may be calculated as an alternative to individual target rates for each dwelling.",greater,synthetic
+203faa23-7b71-47c9-a6e5-2333ac45389e,"The riser of the indoor steps of dwelling units and living quarters  may  be  no  more  than  190  millimetres,  and  the  tread  must  be  no  less  than  250 millimetres.",{'ID': '22_Finnish_SafetyOfUse'},"The <e1>riser</e1> of the indoor steps of dwelling units and living quarters may be no more than <e2>190 millimetres</e2>, and the tread must be no less than 250 millimetres.",less-equal,annotated
+01bd7c41-594c-4440-8058-c34f1c4bad09,"When determining the free area available for ventilation during sleeping hours, only the proportion of openings that can be opened securely should be considered to provide useful ventilation.",{'ID': '82_UK_DocO_Overheating'},"When determining the free area <e1>available for ventilation during sleeping hours</e1>, only the proportion of openings that can be <e2>opened securely</e2> should be considered to provide useful ventilation.",none,annotated
+74002ed3-548e-4e2f-8835-be76e643c67d_5,,,NOTE 2: Double doors effectively provide nibs where each leaf is at least <e1>25</e1> <e2>total extract air flow</e2>.,greater-equal,synthetic
+bb9ec292-062b-43c3-8590-856dd5f6b890_1,,,"The building primary energy rate and <e1>calculations</e1> calculated using the measured air permeability must not be higher than the target primary energy rate and <e2>density</e2>, respectively.",less-equal,synthetic
+2a256a9c-0b8a-4acf-87e1-86a5857f36a3_7,,,"Where a driveway forms all, or part of, the approach route, an <e1>fixed to a base</e1> of at least <e2>01:20:00</e2> wide should be provided so that a wheelchair user can pass a parked car.",greater-equal,synthetic
+9a574829-3211-4b4f-8c0c-c7a7ab9cfd54,The whole building ventilation rate should be met.,{'ID': '47_UK_DocF_V2_Ventilation'},The whole <e1>building</e1> <e2>ventilation rate</e2> should be met.,part-of,annotated