File size: 43,098 Bytes
f998fcd |
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 |
{
"language": "Solidity",
"sources": {
"@openzeppelin/contracts/token/ERC20/extensions/draft-IERC20Permit.sol": {
"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in\n * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].\n *\n * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by\n * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't\n * need to send a transaction, and thus is not required to hold Ether at all.\n */\ninterface IERC20Permit {\n /**\n * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,\n * given ``owner``'s signed approval.\n *\n * IMPORTANT: The same issues {IERC20-approve} has related to transaction\n * ordering also apply here.\n *\n * Emits an {Approval} event.\n *\n * Requirements:\n *\n * - `spender` cannot be the zero address.\n * - `deadline` must be a timestamp in the future.\n * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`\n * over the EIP712-formatted function arguments.\n * - the signature must use ``owner``'s current nonce (see {nonces}).\n *\n * For more information on the signature format, see the\n * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP\n * section].\n */\n function permit(\n address owner,\n address spender,\n uint256 value,\n uint256 deadline,\n uint8 v,\n bytes32 r,\n bytes32 s\n ) external;\n\n /**\n * @dev Returns the current nonce for `owner`. This value must be\n * included whenever a signature is generated for {permit}.\n *\n * Every successful call to {permit} increases ``owner``'s nonce by one. This\n * prevents a signature from being used multiple times.\n */\n function nonces(address owner) external view returns (uint256);\n\n /**\n * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.\n */\n // solhint-disable-next-line func-name-mixedcase\n function DOMAIN_SEPARATOR() external view returns (bytes32);\n}\n"
},
"@openzeppelin/contracts/token/ERC20/IERC20.sol": {
"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC20 standard as defined in the EIP.\n */\ninterface IERC20 {\n /**\n * @dev Emitted when `value` tokens are moved from one account (`from`) to\n * another (`to`).\n *\n * Note that `value` may be zero.\n */\n event Transfer(address indexed from, address indexed to, uint256 value);\n\n /**\n * @dev Emitted when the allowance of a `spender` for an `owner` is set by\n * a call to {approve}. `value` is the new allowance.\n */\n event Approval(address indexed owner, address indexed spender, uint256 value);\n\n /**\n * @dev Returns the amount of tokens in existence.\n */\n function totalSupply() external view returns (uint256);\n\n /**\n * @dev Returns the amount of tokens owned by `account`.\n */\n function balanceOf(address account) external view returns (uint256);\n\n /**\n * @dev Moves `amount` tokens from the caller's account to `to`.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * Emits a {Transfer} event.\n */\n function transfer(address to, uint256 amount) external returns (bool);\n\n /**\n * @dev Returns the remaining number of tokens that `spender` will be\n * allowed to spend on behalf of `owner` through {transferFrom}. This is\n * zero by default.\n *\n * This value changes when {approve} or {transferFrom} are called.\n */\n function allowance(address owner, address spender) external view returns (uint256);\n\n /**\n * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * IMPORTANT: Beware that changing an allowance with this method brings the risk\n * that someone may use both the old and the new allowance by unfortunate\n * transaction ordering. One possible solution to mitigate this race\n * condition is to first reduce the spender's allowance to 0 and set the\n * desired value afterwards:\n * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n *\n * Emits an {Approval} event.\n */\n function approve(address spender, uint256 amount) external returns (bool);\n\n /**\n * @dev Moves `amount` tokens from `from` to `to` using the\n * allowance mechanism. `amount` is then deducted from the caller's\n * allowance.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * Emits a {Transfer} event.\n */\n function transferFrom(\n address from,\n address to,\n uint256 amount\n ) external returns (bool);\n}\n"
},
"@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol": {
"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/utils/SafeERC20.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../IERC20.sol\";\nimport \"../extensions/draft-IERC20Permit.sol\";\nimport \"../../../utils/Address.sol\";\n\n/**\n * @title SafeERC20\n * @dev Wrappers around ERC20 operations that throw on failure (when the token\n * contract returns false). Tokens that return no value (and instead revert or\n * throw on failure) are also supported, non-reverting calls are assumed to be\n * successful.\n * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,\n * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.\n */\nlibrary SafeERC20 {\n using Address for address;\n\n function safeTransfer(\n IERC20 token,\n address to,\n uint256 value\n ) internal {\n _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));\n }\n\n function safeTransferFrom(\n IERC20 token,\n address from,\n address to,\n uint256 value\n ) internal {\n _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));\n }\n\n /**\n * @dev Deprecated. This function has issues similar to the ones found in\n * {IERC20-approve}, and its usage is discouraged.\n *\n * Whenever possible, use {safeIncreaseAllowance} and\n * {safeDecreaseAllowance} instead.\n */\n function safeApprove(\n IERC20 token,\n address spender,\n uint256 value\n ) internal {\n // safeApprove should only be called when setting an initial allowance,\n // or when resetting it to zero. To increase and decrease it, use\n // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'\n require(\n (value == 0) || (token.allowance(address(this), spender) == 0),\n \"SafeERC20: approve from non-zero to non-zero allowance\"\n );\n _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));\n }\n\n function safeIncreaseAllowance(\n IERC20 token,\n address spender,\n uint256 value\n ) internal {\n uint256 newAllowance = token.allowance(address(this), spender) + value;\n _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));\n }\n\n function safeDecreaseAllowance(\n IERC20 token,\n address spender,\n uint256 value\n ) internal {\n unchecked {\n uint256 oldAllowance = token.allowance(address(this), spender);\n require(oldAllowance >= value, \"SafeERC20: decreased allowance below zero\");\n uint256 newAllowance = oldAllowance - value;\n _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));\n }\n }\n\n function safePermit(\n IERC20Permit token,\n address owner,\n address spender,\n uint256 value,\n uint256 deadline,\n uint8 v,\n bytes32 r,\n bytes32 s\n ) internal {\n uint256 nonceBefore = token.nonces(owner);\n token.permit(owner, spender, value, deadline, v, r, s);\n uint256 nonceAfter = token.nonces(owner);\n require(nonceAfter == nonceBefore + 1, \"SafeERC20: permit did not succeed\");\n }\n\n /**\n * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement\n * on the return value: the return value is optional (but if data is returned, it must not be false).\n * @param token The token targeted by the call.\n * @param data The call data (encoded using abi.encode or one of its variants).\n */\n function _callOptionalReturn(IERC20 token, bytes memory data) private {\n // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since\n // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that\n // the target address contains contract code and also asserts for success in the low-level call.\n\n bytes memory returndata = address(token).functionCall(data, \"SafeERC20: low-level call failed\");\n if (returndata.length > 0) {\n // Return data is optional\n require(abi.decode(returndata, (bool)), \"SafeERC20: ERC20 operation did not succeed\");\n }\n }\n}\n"
},
"@openzeppelin/contracts/utils/Address.sol": {
"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)\n\npragma solidity ^0.8.1;\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary Address {\n /**\n * @dev Returns true if `account` is a contract.\n *\n * [IMPORTANT]\n * ====\n * It is unsafe to assume that an address for which this function returns\n * false is an externally-owned account (EOA) and not a contract.\n *\n * Among others, `isContract` will return false for the following\n * types of addresses:\n *\n * - an externally-owned account\n * - a contract in construction\n * - an address where a contract will be created\n * - an address where a contract lived, but was destroyed\n * ====\n *\n * [IMPORTANT]\n * ====\n * You shouldn't rely on `isContract` to protect against flash loan attacks!\n *\n * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets\n * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract\n * constructor.\n * ====\n */\n function isContract(address account) internal view returns (bool) {\n // This method relies on extcodesize/address.code.length, which returns 0\n // for contracts in construction, since the code is only stored at the end\n // of the constructor execution.\n\n return account.code.length > 0;\n }\n\n /**\n * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n * `recipient`, forwarding all available gas and reverting on errors.\n *\n * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n * of certain opcodes, possibly making contracts go over the 2300 gas limit\n * imposed by `transfer`, making them unable to receive funds via\n * `transfer`. {sendValue} removes this limitation.\n *\n * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n *\n * IMPORTANT: because control is transferred to `recipient`, care must be\n * taken to not create reentrancy vulnerabilities. Consider using\n * {ReentrancyGuard} or the\n * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n */\n function sendValue(address payable recipient, uint256 amount) internal {\n require(address(this).balance >= amount, \"Address: insufficient balance\");\n\n (bool success, ) = recipient.call{value: amount}(\"\");\n require(success, \"Address: unable to send value, recipient may have reverted\");\n }\n\n /**\n * @dev Performs a Solidity function call using a low level `call`. A\n * plain `call` is an unsafe replacement for a function call: use this\n * function instead.\n *\n * If `target` reverts with a revert reason, it is bubbled up by this\n * function (like regular Solidity function calls).\n *\n * Returns the raw returned data. To convert to the expected return value,\n * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n *\n * Requirements:\n *\n * - `target` must be a contract.\n * - calling `target` with `data` must not revert.\n *\n * _Available since v3.1._\n */\n function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n return functionCall(target, data, \"Address: low-level call failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with\n * `errorMessage` as a fallback revert reason when `target` reverts.\n *\n * _Available since v3.1._\n */\n function functionCall(\n address target,\n bytes memory data,\n string memory errorMessage\n ) internal returns (bytes memory) {\n return functionCallWithValue(target, data, 0, errorMessage);\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but also transferring `value` wei to `target`.\n *\n * Requirements:\n *\n * - the calling contract must have an ETH balance of at least `value`.\n * - the called Solidity function must be `payable`.\n *\n * _Available since v3.1._\n */\n function functionCallWithValue(\n address target,\n bytes memory data,\n uint256 value\n ) internal returns (bytes memory) {\n return functionCallWithValue(target, data, value, \"Address: low-level call with value failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but\n * with `errorMessage` as a fallback revert reason when `target` reverts.\n *\n * _Available since v3.1._\n */\n function functionCallWithValue(\n address target,\n bytes memory data,\n uint256 value,\n string memory errorMessage\n ) internal returns (bytes memory) {\n require(address(this).balance >= value, \"Address: insufficient balance for call\");\n require(isContract(target), \"Address: call to non-contract\");\n\n (bool success, bytes memory returndata) = target.call{value: value}(data);\n return verifyCallResult(success, returndata, errorMessage);\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but performing a static call.\n *\n * _Available since v3.3._\n */\n function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n return functionStaticCall(target, data, \"Address: low-level static call failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n * but performing a static call.\n *\n * _Available since v3.3._\n */\n function functionStaticCall(\n address target,\n bytes memory data,\n string memory errorMessage\n ) internal view returns (bytes memory) {\n require(isContract(target), \"Address: static call to non-contract\");\n\n (bool success, bytes memory returndata) = target.staticcall(data);\n return verifyCallResult(success, returndata, errorMessage);\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but performing a delegate call.\n *\n * _Available since v3.4._\n */\n function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {\n return functionDelegateCall(target, data, \"Address: low-level delegate call failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n * but performing a delegate call.\n *\n * _Available since v3.4._\n */\n function functionDelegateCall(\n address target,\n bytes memory data,\n string memory errorMessage\n ) internal returns (bytes memory) {\n require(isContract(target), \"Address: delegate call to non-contract\");\n\n (bool success, bytes memory returndata) = target.delegatecall(data);\n return verifyCallResult(success, returndata, errorMessage);\n }\n\n /**\n * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the\n * revert reason using the provided one.\n *\n * _Available since v4.3._\n */\n function verifyCallResult(\n bool success,\n bytes memory returndata,\n string memory errorMessage\n ) internal pure returns (bytes memory) {\n if (success) {\n return returndata;\n } else {\n // Look for revert reason and bubble it up if present\n if (returndata.length > 0) {\n // The easiest way to bubble the revert reason is using memory via assembly\n /// @solidity memory-safe-assembly\n assembly {\n let returndata_size := mload(returndata)\n revert(add(32, returndata), returndata_size)\n }\n } else {\n revert(errorMessage);\n }\n }\n }\n}\n"
},
"@openzeppelin/contracts/utils/structs/EnumerableSet.sol": {
"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (utils/structs/EnumerableSet.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Library for managing\n * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive\n * types.\n *\n * Sets have the following properties:\n *\n * - Elements are added, removed, and checked for existence in constant time\n * (O(1)).\n * - Elements are enumerated in O(n). No guarantees are made on the ordering.\n *\n * ```\n * contract Example {\n * // Add the library methods\n * using EnumerableSet for EnumerableSet.AddressSet;\n *\n * // Declare a set state variable\n * EnumerableSet.AddressSet private mySet;\n * }\n * ```\n *\n * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)\n * and `uint256` (`UintSet`) are supported.\n *\n * [WARNING]\n * ====\n * Trying to delete such a structure from storage will likely result in data corruption, rendering the structure unusable.\n * See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.\n *\n * In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an array of EnumerableSet.\n * ====\n */\nlibrary EnumerableSet {\n // To implement this library for multiple types with as little code\n // repetition as possible, we write it in terms of a generic Set type with\n // bytes32 values.\n // The Set implementation uses private functions, and user-facing\n // implementations (such as AddressSet) are just wrappers around the\n // underlying Set.\n // This means that we can only create new EnumerableSets for types that fit\n // in bytes32.\n\n struct Set {\n // Storage of set values\n bytes32[] _values;\n // Position of the value in the `values` array, plus 1 because index 0\n // means a value is not in the set.\n mapping(bytes32 => uint256) _indexes;\n }\n\n /**\n * @dev Add a value to a set. O(1).\n *\n * Returns true if the value was added to the set, that is if it was not\n * already present.\n */\n function _add(Set storage set, bytes32 value) private returns (bool) {\n if (!_contains(set, value)) {\n set._values.push(value);\n // The value is stored at length-1, but we add 1 to all indexes\n // and use 0 as a sentinel value\n set._indexes[value] = set._values.length;\n return true;\n } else {\n return false;\n }\n }\n\n /**\n * @dev Removes a value from a set. O(1).\n *\n * Returns true if the value was removed from the set, that is if it was\n * present.\n */\n function _remove(Set storage set, bytes32 value) private returns (bool) {\n // We read and store the value's index to prevent multiple reads from the same storage slot\n uint256 valueIndex = set._indexes[value];\n\n if (valueIndex != 0) {\n // Equivalent to contains(set, value)\n // To delete an element from the _values array in O(1), we swap the element to delete with the last one in\n // the array, and then remove the last element (sometimes called as 'swap and pop').\n // This modifies the order of the array, as noted in {at}.\n\n uint256 toDeleteIndex = valueIndex - 1;\n uint256 lastIndex = set._values.length - 1;\n\n if (lastIndex != toDeleteIndex) {\n bytes32 lastValue = set._values[lastIndex];\n\n // Move the last value to the index where the value to delete is\n set._values[toDeleteIndex] = lastValue;\n // Update the index for the moved value\n set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex\n }\n\n // Delete the slot where the moved value was stored\n set._values.pop();\n\n // Delete the index for the deleted slot\n delete set._indexes[value];\n\n return true;\n } else {\n return false;\n }\n }\n\n /**\n * @dev Returns true if the value is in the set. O(1).\n */\n function _contains(Set storage set, bytes32 value) private view returns (bool) {\n return set._indexes[value] != 0;\n }\n\n /**\n * @dev Returns the number of values on the set. O(1).\n */\n function _length(Set storage set) private view returns (uint256) {\n return set._values.length;\n }\n\n /**\n * @dev Returns the value stored at position `index` in the set. O(1).\n *\n * Note that there are no guarantees on the ordering of values inside the\n * array, and it may change when more values are added or removed.\n *\n * Requirements:\n *\n * - `index` must be strictly less than {length}.\n */\n function _at(Set storage set, uint256 index) private view returns (bytes32) {\n return set._values[index];\n }\n\n /**\n * @dev Return the entire set in an array\n *\n * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed\n * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that\n * this function has an unbounded cost, and using it as part of a state-changing function may render the function\n * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.\n */\n function _values(Set storage set) private view returns (bytes32[] memory) {\n return set._values;\n }\n\n // Bytes32Set\n\n struct Bytes32Set {\n Set _inner;\n }\n\n /**\n * @dev Add a value to a set. O(1).\n *\n * Returns true if the value was added to the set, that is if it was not\n * already present.\n */\n function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {\n return _add(set._inner, value);\n }\n\n /**\n * @dev Removes a value from a set. O(1).\n *\n * Returns true if the value was removed from the set, that is if it was\n * present.\n */\n function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {\n return _remove(set._inner, value);\n }\n\n /**\n * @dev Returns true if the value is in the set. O(1).\n */\n function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {\n return _contains(set._inner, value);\n }\n\n /**\n * @dev Returns the number of values in the set. O(1).\n */\n function length(Bytes32Set storage set) internal view returns (uint256) {\n return _length(set._inner);\n }\n\n /**\n * @dev Returns the value stored at position `index` in the set. O(1).\n *\n * Note that there are no guarantees on the ordering of values inside the\n * array, and it may change when more values are added or removed.\n *\n * Requirements:\n *\n * - `index` must be strictly less than {length}.\n */\n function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {\n return _at(set._inner, index);\n }\n\n /**\n * @dev Return the entire set in an array\n *\n * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed\n * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that\n * this function has an unbounded cost, and using it as part of a state-changing function may render the function\n * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.\n */\n function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {\n return _values(set._inner);\n }\n\n // AddressSet\n\n struct AddressSet {\n Set _inner;\n }\n\n /**\n * @dev Add a value to a set. O(1).\n *\n * Returns true if the value was added to the set, that is if it was not\n * already present.\n */\n function add(AddressSet storage set, address value) internal returns (bool) {\n return _add(set._inner, bytes32(uint256(uint160(value))));\n }\n\n /**\n * @dev Removes a value from a set. O(1).\n *\n * Returns true if the value was removed from the set, that is if it was\n * present.\n */\n function remove(AddressSet storage set, address value) internal returns (bool) {\n return _remove(set._inner, bytes32(uint256(uint160(value))));\n }\n\n /**\n * @dev Returns true if the value is in the set. O(1).\n */\n function contains(AddressSet storage set, address value) internal view returns (bool) {\n return _contains(set._inner, bytes32(uint256(uint160(value))));\n }\n\n /**\n * @dev Returns the number of values in the set. O(1).\n */\n function length(AddressSet storage set) internal view returns (uint256) {\n return _length(set._inner);\n }\n\n /**\n * @dev Returns the value stored at position `index` in the set. O(1).\n *\n * Note that there are no guarantees on the ordering of values inside the\n * array, and it may change when more values are added or removed.\n *\n * Requirements:\n *\n * - `index` must be strictly less than {length}.\n */\n function at(AddressSet storage set, uint256 index) internal view returns (address) {\n return address(uint160(uint256(_at(set._inner, index))));\n }\n\n /**\n * @dev Return the entire set in an array\n *\n * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed\n * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that\n * this function has an unbounded cost, and using it as part of a state-changing function may render the function\n * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.\n */\n function values(AddressSet storage set) internal view returns (address[] memory) {\n bytes32[] memory store = _values(set._inner);\n address[] memory result;\n\n /// @solidity memory-safe-assembly\n assembly {\n result := store\n }\n\n return result;\n }\n\n // UintSet\n\n struct UintSet {\n Set _inner;\n }\n\n /**\n * @dev Add a value to a set. O(1).\n *\n * Returns true if the value was added to the set, that is if it was not\n * already present.\n */\n function add(UintSet storage set, uint256 value) internal returns (bool) {\n return _add(set._inner, bytes32(value));\n }\n\n /**\n * @dev Removes a value from a set. O(1).\n *\n * Returns true if the value was removed from the set, that is if it was\n * present.\n */\n function remove(UintSet storage set, uint256 value) internal returns (bool) {\n return _remove(set._inner, bytes32(value));\n }\n\n /**\n * @dev Returns true if the value is in the set. O(1).\n */\n function contains(UintSet storage set, uint256 value) internal view returns (bool) {\n return _contains(set._inner, bytes32(value));\n }\n\n /**\n * @dev Returns the number of values on the set. O(1).\n */\n function length(UintSet storage set) internal view returns (uint256) {\n return _length(set._inner);\n }\n\n /**\n * @dev Returns the value stored at position `index` in the set. O(1).\n *\n * Note that there are no guarantees on the ordering of values inside the\n * array, and it may change when more values are added or removed.\n *\n * Requirements:\n *\n * - `index` must be strictly less than {length}.\n */\n function at(UintSet storage set, uint256 index) internal view returns (uint256) {\n return uint256(_at(set._inner, index));\n }\n\n /**\n * @dev Return the entire set in an array\n *\n * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed\n * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that\n * this function has an unbounded cost, and using it as part of a state-changing function may render the function\n * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.\n */\n function values(UintSet storage set) internal view returns (uint256[] memory) {\n bytes32[] memory store = _values(set._inner);\n uint256[] memory result;\n\n /// @solidity memory-safe-assembly\n assembly {\n result := store\n }\n\n return result;\n }\n}\n"
},
"contracts/DolzVault.sol": {
"content": "//SPDX-License-Identifier: MIT\npragma solidity 0.8.7;\n\nimport \"@openzeppelin/contracts/token/ERC20/IERC20.sol\";\nimport \"@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol\";\nimport \"@openzeppelin/contracts/utils/structs/EnumerableSet.sol\";\n\nstruct Lock {\n address token;\n uint256 amount;\n uint128 withdrawalStart;\n uint64 withdrawPeriodDuration;\n uint64 withdrawPeriodNumber;\n uint256 withdrewAmount;\n}\n\nstruct UserLock {\n address user;\n Lock lock;\n}\n\ninterface IERC20Burnable {\n function burn(uint256 amount) external;\n}\n\ncontract DolzVault {\n using SafeERC20 for IERC20;\n using EnumerableSet for EnumerableSet.AddressSet;\n\n EnumerableSet.AddressSet private users;\n\n mapping(address => Lock[]) private userToLocks;\n\n event Locked(\n address token,\n uint256 amount,\n uint256 cliffEnd,\n uint256 vestingPeriodDuration,\n uint256 vestingPeriodNumber,\n uint256 id\n );\n\n event Claimed(address user, address token, uint256 amount);\n\n event Burnt(address user, address token, uint256 amount);\n\n event BurntToDead(address user, address token, uint256 amount);\n\n event Transfered(address user, address token, uint256 amount, address to);\n\n /**\n * @notice Lock the user's token in the vault\n * @dev The tokens must have been approved first\n * @param token Address of the token being locked\n * @param amount Amount to be locked in the vault\n * @param cliffInDays Cliff duration before tokens can be unlocked\n * @param vestingPeriodInDays Vesting period duration\n * @param vestingPeriodNumber Number of periods required to unlock 100%\n */\n function lock(\n address token,\n uint256 amount,\n uint256 cliffInDays,\n uint256 vestingPeriodInDays,\n uint256 vestingPeriodNumber\n ) external {\n // Avoids dead lock\n require(\n (vestingPeriodInDays > 0 && vestingPeriodNumber > 0) ||\n vestingPeriodInDays == 0,\n \"Vault : invalid params\"\n );\n\n // Add the user to the enumerable set\n users.add(msg.sender);\n\n createLock(\n token,\n amount,\n uint128(block.timestamp + cliffInDays * 24 * 3600),\n uint64(vestingPeriodInDays * 24 * 3600),\n uint64(vestingPeriodNumber),\n msg.sender\n );\n\n // Actually transfer the locked funds\n IERC20(token).safeTransferFrom(msg.sender, address(this), amount);\n }\n\n function createLock(\n address token,\n uint256 amount,\n uint128 withdrawalStart,\n uint64 withdrawPeriodDuration,\n uint64 withdrawPeriodNumber,\n address user\n ) private {\n // Add the lock datas to the user's locks list\n userToLocks[user].push(\n Lock({\n token: token,\n amount: amount,\n withdrawalStart: withdrawalStart,\n withdrawPeriodDuration: withdrawPeriodDuration,\n withdrawPeriodNumber: withdrawPeriodNumber,\n withdrewAmount: 0\n })\n );\n\n // Emit the lock even\n emit Locked(\n token,\n amount,\n withdrawalStart,\n withdrawalStart,\n withdrawPeriodDuration,\n userToLocks[user].length - 1\n );\n }\n\n /**\n * @notice Returns the number of token that can be claimed back\n * @param _user Address of the user\n * @param lockId The index of the lock for this user\n * @dev lockId starts at 0\n * @return balance The amount that can be unlocked\n */\n function claimable(address _user, uint256 lockId)\n public\n view\n returns (uint256 balance)\n {\n Lock memory _lock = userToLocks[_user][lockId];\n\n if (block.timestamp < _lock.withdrawalStart) return 0;\n\n // In case just for cliff\n if (_lock.withdrawPeriodDuration == 0)\n return _lock.amount - _lock.withdrewAmount;\n\n // Computes the number of withdrawal periods that have passed\n uint256 periodsElapsed = (block.timestamp - _lock.withdrawalStart) /\n _lock.withdrawPeriodDuration +\n 1;\n\n // Checks if all the withdrawal periods have passed\n if (periodsElapsed >= _lock.withdrawPeriodNumber) {\n // All the withdrawal periods have passed, so we send all the remaining claimable balance\n balance = _lock.amount - _lock.withdrewAmount;\n } else {\n // Computes how many tokens the user can withdraw per period\n uint256 withdrawableAmountPerPeriod = _lock.amount /\n _lock.withdrawPeriodNumber;\n\n // Computes how much the user can withdraw since the begining, minest the amount it already withdrew\n balance =\n withdrawableAmountPerPeriod *\n periodsElapsed -\n _lock.withdrewAmount;\n }\n }\n\n /**\n * @notice Allow to unlock some tokens\n * @param lockId The index of the lock for this user\n * @dev lockId starts at 0\n * @param _amount Amount to be unlocked from the vault\n */\n function claim(uint256 lockId, uint256 _amount) external {\n // Calculate how much can be retrieved by the user\n uint256 _claimable = claimable(msg.sender, lockId);\n // Check the amount is legit\n require(_amount <= _claimable, \"Vault: Requested amount too high\");\n\n // Load the lock\n Lock storage _lock = userToLocks[msg.sender][lockId];\n\n // Add the amount sent back to the user's withdrawn balance\n _lock.withdrewAmount += _amount;\n\n // Send the tokens back\n IERC20(_lock.token).safeTransfer(msg.sender, _amount);\n\n // Notify for monitoring\n emit Claimed(msg.sender, _lock.token, _amount);\n }\n\n /**\n * @notice Transfer from one lock to another owner\n * @param to Address of the user that will receive le lock (bob)\n * @param lockId The index of the lock to take the tokens from\n * @param amount The amount withdrawn from alice to bob\n * @dev lockId starts at 0\n */\n function transfer(\n address to,\n uint256 lockId,\n uint256 amount\n ) external {\n // Load Alice's lock\n Lock storage _lock = userToLocks[msg.sender][lockId];\n\n // Check Alice didn't claim yet, otherwise this will be a mess in the numbers\n require(_lock.withdrewAmount == 0, \"Already started to claim\");\n\n // We don't need to check if amout < locked since this would fail anyway\n _lock.amount -= amount;\n\n // Add the user to the enumerable set\n users.add(to);\n\n // Notify for monitoring\n emit Transfered(msg.sender, _lock.token, amount, to);\n\n // Create the lock for Bob\n createLock(\n _lock.token,\n amount,\n _lock.withdrawalStart,\n _lock.withdrawPeriodDuration,\n _lock.withdrawPeriodNumber,\n to\n );\n }\n\n /**\n * @notice Burn token by using the token's burn method\n * @param lockId The index of the lock to burn the tokens from\n * @param amount The amount to burn\n * @dev lockId starts at 0\n */\n function burn(uint256 lockId, uint256 amount) external {\n // Load Alice's lock\n Lock storage _lock = userToLocks[msg.sender][lockId];\n\n // Check Alice didn't claim yet, otherwise this will be a mess in the numbers\n require(_lock.withdrewAmount == 0, \"Already started to claim\");\n\n // We don't need to check if amout < locked since this would fail anyway\n _lock.amount -= amount;\n\n // Effectively burn the token\n IERC20Burnable(_lock.token).burn(amount);\n\n // Notify for monitoring\n emit Burnt(msg.sender, _lock.token, amount);\n }\n\n /**\n * @notice Burn token by sending them to the dead address\n * @param lockId The index of the lock to burn the tokens from\n * @param amount The amount to burn\n * @dev lockId starts at 0\n */\n function burnToDead(uint256 lockId, uint256 amount) external {\n // Load Alice's lock\n Lock storage _lock = userToLocks[msg.sender][lockId];\n\n // Check Alice didn't claim yet, otherwise this will be a mess in the numbers\n require(_lock.withdrewAmount == 0, \"Already started to claim\");\n\n // We don't need to check if amout < locked since this would fail anyway\n _lock.amount -= amount;\n\n // Effectively transfer the tokens to the dead address\n IERC20(_lock.token).safeTransfer(\n 0x000000000000000000000000000000000000dEaD,\n amount\n );\n\n // Notify for monitoring\n emit BurntToDead(msg.sender, _lock.token, amount);\n }\n\n /**\n * @notice Returns the list of all users who locked at least once\n * @return The list of all users who locked at least once\n */\n function listAllUsers() external view returns (address[] memory) {\n return users.values();\n }\n\n /**\n * @notice Returns the list of all locks\n * @return The list of all locks\n */\n function listAllLocks() external view returns (UserLock[] memory) {\n uint256 size = 0;\n\n // Calculate size to allocate memory\n for (uint256 i = 0; i < users.length(); i++) {\n size += userToLocks[users.at(i)].length;\n }\n\n UserLock[] memory results = new UserLock[](size);\n\n // Iterate over all users\n uint256 counter = 0;\n for (uint256 i = 0; i < users.length(); i++) {\n Lock[] memory locks = userToLocks[users.at(i)];\n for (uint256 j = 0; j < locks.length; j++) {\n results[counter++] = UserLock({\n user: users.at(i),\n lock: locks[j]\n });\n }\n }\n\n return results;\n }\n\n /**\n * @notice Returns the list of all locks for a specific user\n * @param _user Address of the user\n * @return The list of locks\n */\n function listLocks(address _user) public view returns (Lock[] memory) {\n return userToLocks[_user];\n }\n\n /**\n * @notice Returns the list of all locks for the caller\n * @return The list of locks\n */\n function listMyLocks() external view returns (Lock[] memory) {\n return listLocks(msg.sender);\n }\n}\n"
}
},
"settings": {
"outputSelection": {
"*": {
"*": [
"evm.bytecode",
"evm.deployedBytecode",
"devdoc",
"userdoc",
"metadata",
"abi"
]
}
},
"optimizer": {
"enabled": true,
"runs": 5000
},
"metadata": {
"useLiteralContent": true
},
"libraries": {}
}
} |