| { | |
| "language": "Solidity", | |
| "sources": { | |
| "contracts/StepVesting.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\n\npragma solidity ^0.6.12;\n\nimport \"@openzeppelin/contracts/math/Math.sol\";\nimport \"@openzeppelin/contracts/math/SafeMath.sol\";\nimport \"@openzeppelin/contracts/access/Ownable.sol\";\nimport \"@openzeppelin/contracts/token/ERC20/SafeERC20.sol\";\n\n\ncontract StepVesting is Ownable {\n using SafeMath for uint256;\n using SafeERC20 for IERC20;\n\n event ReceiverChanged(address oldWallet, address newWallet);\n\n uint256 public immutable started;\n IERC20 public immutable token;\n uint256 public immutable cliffDuration;\n uint256 public immutable stepDuration;\n uint256 public immutable cliffAmount;\n uint256 public immutable stepAmount;\n uint256 public immutable numOfSteps;\n\n address public receiver;\n uint256 public claimed;\n\n modifier onlyReceiver {\n require(msg.sender == receiver, \"access denied\");\n _;\n }\n\n constructor(\n IERC20 _token,\n uint256 _started,\n uint256 _cliffDuration,\n uint256 _stepDuration,\n uint256 _cliffAmount,\n uint256 _stepAmount,\n uint256 _numOfSteps,\n address _receiver\n ) public {\n token = _token;\n started = _started;\n cliffDuration = _cliffDuration;\n stepDuration = _stepDuration;\n cliffAmount = _cliffAmount;\n stepAmount = _stepAmount;\n numOfSteps = _numOfSteps;\n setReceiver(_receiver);\n }\n\n function available() public view returns(uint256) {\n return claimable().sub(claimed);\n }\n\n function claimable() public view returns(uint256) {\n if (block.timestamp < started.add(cliffDuration)) {\n return 0;\n }\n\n uint256 passedSinceCliff = block.timestamp.sub(started.add(cliffDuration));\n uint256 stepsPassed = Math.min(numOfSteps, passedSinceCliff.div(stepDuration));\n return cliffAmount.add(\n stepsPassed.mul(stepAmount)\n );\n }\n\n function setReceiver(address _receiver) public onlyOwner {\n require(_receiver != address(0), \"Receiver is zero address\");\n emit ReceiverChanged(receiver, _receiver);\n receiver = _receiver;\n }\n\n function kill(address target) external onlyOwner {\n require(target != address(0), \"Transfer to zero address\");\n uint256 amount = token.balanceOf(address(this));\n token.safeTransfer(target, amount);\n }\n\n function claim() external onlyReceiver {\n uint256 amount = available();\n claimed = claimed.add(amount);\n token.safeTransfer(msg.sender, amount);\n }\n}\n" | |
| }, | |
| "@openzeppelin/contracts/math/Math.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\n\npragma solidity >=0.6.0 <0.8.0;\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary Math {\n /**\n * @dev Returns the largest of two numbers.\n */\n function max(uint256 a, uint256 b) internal pure returns (uint256) {\n return a >= b ? a : b;\n }\n\n /**\n * @dev Returns the smallest of two numbers.\n */\n function min(uint256 a, uint256 b) internal pure returns (uint256) {\n return a < b ? a : b;\n }\n\n /**\n * @dev Returns the average of two numbers. The result is rounded towards\n * zero.\n */\n function average(uint256 a, uint256 b) internal pure returns (uint256) {\n // (a + b) / 2 can overflow, so we distribute\n return (a / 2) + (b / 2) + ((a % 2 + b % 2) / 2);\n }\n}\n" | |
| }, | |
| "@openzeppelin/contracts/math/SafeMath.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\n\npragma solidity >=0.6.0 <0.8.0;\n\n/**\n * @dev Wrappers over Solidity's arithmetic operations with added overflow\n * checks.\n *\n * Arithmetic operations in Solidity wrap on overflow. This can easily result\n * in bugs, because programmers usually assume that an overflow raises an\n * error, which is the standard behavior in high level programming languages.\n * `SafeMath` restores this intuition by reverting the transaction when an\n * operation overflows.\n *\n * Using this library instead of the unchecked operations eliminates an entire\n * class of bugs, so it's recommended to use it always.\n */\nlibrary SafeMath {\n /**\n * @dev Returns the addition of two unsigned integers, with an overflow flag.\n *\n * _Available since v3.4._\n */\n function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n uint256 c = a + b;\n if (c < a) return (false, 0);\n return (true, c);\n }\n\n /**\n * @dev Returns the substraction of two unsigned integers, with an overflow flag.\n *\n * _Available since v3.4._\n */\n function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n if (b > a) return (false, 0);\n return (true, a - b);\n }\n\n /**\n * @dev Returns the multiplication of two unsigned integers, with an overflow flag.\n *\n * _Available since v3.4._\n */\n function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n // Gas optimization: this is cheaper than requiring 'a' not being zero, but the\n // benefit is lost if 'b' is also tested.\n // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522\n if (a == 0) return (true, 0);\n uint256 c = a * b;\n if (c / a != b) return (false, 0);\n return (true, c);\n }\n\n /**\n * @dev Returns the division of two unsigned integers, with a division by zero flag.\n *\n * _Available since v3.4._\n */\n function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n if (b == 0) return (false, 0);\n return (true, a / b);\n }\n\n /**\n * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.\n *\n * _Available since v3.4._\n */\n function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n if (b == 0) return (false, 0);\n return (true, a % b);\n }\n\n /**\n * @dev Returns the addition of two unsigned integers, reverting on\n * overflow.\n *\n * Counterpart to Solidity's `+` operator.\n *\n * Requirements:\n *\n * - Addition cannot overflow.\n */\n function add(uint256 a, uint256 b) internal pure returns (uint256) {\n uint256 c = a + b;\n require(c >= a, \"SafeMath: addition overflow\");\n return c;\n }\n\n /**\n * @dev Returns the subtraction of two unsigned integers, reverting on\n * overflow (when the result is negative).\n *\n * Counterpart to Solidity's `-` operator.\n *\n * Requirements:\n *\n * - Subtraction cannot overflow.\n */\n function sub(uint256 a, uint256 b) internal pure returns (uint256) {\n require(b <= a, \"SafeMath: subtraction overflow\");\n return a - b;\n }\n\n /**\n * @dev Returns the multiplication of two unsigned integers, reverting on\n * overflow.\n *\n * Counterpart to Solidity's `*` operator.\n *\n * Requirements:\n *\n * - Multiplication cannot overflow.\n */\n function mul(uint256 a, uint256 b) internal pure returns (uint256) {\n if (a == 0) return 0;\n uint256 c = a * b;\n require(c / a == b, \"SafeMath: multiplication overflow\");\n return c;\n }\n\n /**\n * @dev Returns the integer division of two unsigned integers, reverting on\n * division by zero. The result is rounded towards zero.\n *\n * Counterpart to Solidity's `/` operator. Note: this function uses a\n * `revert` opcode (which leaves remaining gas untouched) while Solidity\n * uses an invalid opcode to revert (consuming all remaining gas).\n *\n * Requirements:\n *\n * - The divisor cannot be zero.\n */\n function div(uint256 a, uint256 b) internal pure returns (uint256) {\n require(b > 0, \"SafeMath: division by zero\");\n return a / b;\n }\n\n /**\n * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),\n * reverting when dividing by zero.\n *\n * Counterpart to Solidity's `%` operator. This function uses a `revert`\n * opcode (which leaves remaining gas untouched) while Solidity uses an\n * invalid opcode to revert (consuming all remaining gas).\n *\n * Requirements:\n *\n * - The divisor cannot be zero.\n */\n function mod(uint256 a, uint256 b) internal pure returns (uint256) {\n require(b > 0, \"SafeMath: modulo by zero\");\n return a % b;\n }\n\n /**\n * @dev Returns the subtraction of two unsigned integers, reverting with custom message on\n * overflow (when the result is negative).\n *\n * CAUTION: This function is deprecated because it requires allocating memory for the error\n * message unnecessarily. For custom revert reasons use {trySub}.\n *\n * Counterpart to Solidity's `-` operator.\n *\n * Requirements:\n *\n * - Subtraction cannot overflow.\n */\n function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {\n require(b <= a, errorMessage);\n return a - b;\n }\n\n /**\n * @dev Returns the integer division of two unsigned integers, reverting with custom message on\n * division by zero. The result is rounded towards zero.\n *\n * CAUTION: This function is deprecated because it requires allocating memory for the error\n * message unnecessarily. For custom revert reasons use {tryDiv}.\n *\n * Counterpart to Solidity's `/` operator. Note: this function uses a\n * `revert` opcode (which leaves remaining gas untouched) while Solidity\n * uses an invalid opcode to revert (consuming all remaining gas).\n *\n * Requirements:\n *\n * - The divisor cannot be zero.\n */\n function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {\n require(b > 0, errorMessage);\n return a / b;\n }\n\n /**\n * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),\n * reverting with custom message when dividing by zero.\n *\n * CAUTION: This function is deprecated because it requires allocating memory for the error\n * message unnecessarily. For custom revert reasons use {tryMod}.\n *\n * Counterpart to Solidity's `%` operator. This function uses a `revert`\n * opcode (which leaves remaining gas untouched) while Solidity uses an\n * invalid opcode to revert (consuming all remaining gas).\n *\n * Requirements:\n *\n * - The divisor cannot be zero.\n */\n function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {\n require(b > 0, errorMessage);\n return a % b;\n }\n}\n" | |
| }, | |
| "@openzeppelin/contracts/access/Ownable.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\n\npragma solidity >=0.6.0 <0.8.0;\n\nimport \"../utils/Context.sol\";\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * By default, the owner account will be the one that deploys the contract. This\n * can later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n address private _owner;\n\n event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n /**\n * @dev Initializes the contract setting the deployer as the initial owner.\n */\n constructor () internal {\n address msgSender = _msgSender();\n _owner = msgSender;\n emit OwnershipTransferred(address(0), msgSender);\n }\n\n /**\n * @dev Returns the address of the current owner.\n */\n function owner() public view virtual returns (address) {\n return _owner;\n }\n\n /**\n * @dev Throws if called by any account other than the owner.\n */\n modifier onlyOwner() {\n require(owner() == _msgSender(), \"Ownable: caller is not the owner\");\n _;\n }\n\n /**\n * @dev Leaves the contract without owner. It will not be possible to call\n * `onlyOwner` functions anymore. Can only be called by the current owner.\n *\n * NOTE: Renouncing ownership will leave the contract without an owner,\n * thereby removing any functionality that is only available to the owner.\n */\n function renounceOwnership() public virtual onlyOwner {\n emit OwnershipTransferred(_owner, address(0));\n _owner = address(0);\n }\n\n /**\n * @dev Transfers ownership of the contract to a new account (`newOwner`).\n * Can only be called by the current owner.\n */\n function transferOwnership(address newOwner) public virtual onlyOwner {\n require(newOwner != address(0), \"Ownable: new owner is the zero address\");\n emit OwnershipTransferred(_owner, newOwner);\n _owner = newOwner;\n }\n}\n" | |
| }, | |
| "@openzeppelin/contracts/token/ERC20/SafeERC20.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\n\npragma solidity >=0.6.0 <0.8.0;\n\nimport \"./IERC20.sol\";\nimport \"../../math/SafeMath.sol\";\nimport \"../../utils/Address.sol\";\n\n/**\n * @title SafeERC20\n * @dev Wrappers around ERC20 operations that throw on failure (when the token\n * contract returns false). Tokens that return no value (and instead revert or\n * throw on failure) are also supported, non-reverting calls are assumed to be\n * successful.\n * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,\n * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.\n */\nlibrary SafeERC20 {\n using SafeMath for uint256;\n using Address for address;\n\n function safeTransfer(IERC20 token, address to, uint256 value) internal {\n _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));\n }\n\n function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {\n _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));\n }\n\n /**\n * @dev Deprecated. This function has issues similar to the ones found in\n * {IERC20-approve}, and its usage is discouraged.\n *\n * Whenever possible, use {safeIncreaseAllowance} and\n * {safeDecreaseAllowance} instead.\n */\n function safeApprove(IERC20 token, address spender, uint256 value) internal {\n // safeApprove should only be called when setting an initial allowance,\n // or when resetting it to zero. To increase and decrease it, use\n // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'\n // solhint-disable-next-line max-line-length\n require((value == 0) || (token.allowance(address(this), spender) == 0),\n \"SafeERC20: approve from non-zero to non-zero allowance\"\n );\n _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));\n }\n\n function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {\n uint256 newAllowance = token.allowance(address(this), spender).add(value);\n _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));\n }\n\n function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {\n uint256 newAllowance = token.allowance(address(this), spender).sub(value, \"SafeERC20: decreased allowance below zero\");\n _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));\n }\n\n /**\n * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement\n * on the return value: the return value is optional (but if data is returned, it must not be false).\n * @param token The token targeted by the call.\n * @param data The call data (encoded using abi.encode or one of its variants).\n */\n function _callOptionalReturn(IERC20 token, bytes memory data) private {\n // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since\n // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that\n // the target address contains contract code and also asserts for success in the low-level call.\n\n bytes memory returndata = address(token).functionCall(data, \"SafeERC20: low-level call failed\");\n if (returndata.length > 0) { // Return data is optional\n // solhint-disable-next-line max-line-length\n require(abi.decode(returndata, (bool)), \"SafeERC20: ERC20 operation did not succeed\");\n }\n }\n}\n" | |
| }, | |
| "@openzeppelin/contracts/utils/Context.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\n\npragma solidity >=0.6.0 <0.8.0;\n\n/*\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with GSN meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n function _msgSender() internal view virtual returns (address payable) {\n return msg.sender;\n }\n\n function _msgData() internal view virtual returns (bytes memory) {\n this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691\n return msg.data;\n }\n}\n" | |
| }, | |
| "@openzeppelin/contracts/token/ERC20/IERC20.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\n\npragma solidity >=0.6.0 <0.8.0;\n\n/**\n * @dev Interface of the ERC20 standard as defined in the EIP.\n */\ninterface IERC20 {\n /**\n * @dev Returns the amount of tokens in existence.\n */\n function totalSupply() external view returns (uint256);\n\n /**\n * @dev Returns the amount of tokens owned by `account`.\n */\n function balanceOf(address account) external view returns (uint256);\n\n /**\n * @dev Moves `amount` tokens from the caller's account to `recipient`.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * Emits a {Transfer} event.\n */\n function transfer(address recipient, uint256 amount) external returns (bool);\n\n /**\n * @dev Returns the remaining number of tokens that `spender` will be\n * allowed to spend on behalf of `owner` through {transferFrom}. This is\n * zero by default.\n *\n * This value changes when {approve} or {transferFrom} are called.\n */\n function allowance(address owner, address spender) external view returns (uint256);\n\n /**\n * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * IMPORTANT: Beware that changing an allowance with this method brings the risk\n * that someone may use both the old and the new allowance by unfortunate\n * transaction ordering. One possible solution to mitigate this race\n * condition is to first reduce the spender's allowance to 0 and set the\n * desired value afterwards:\n * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n *\n * Emits an {Approval} event.\n */\n function approve(address spender, uint256 amount) external returns (bool);\n\n /**\n * @dev Moves `amount` tokens from `sender` to `recipient` using the\n * allowance mechanism. `amount` is then deducted from the caller's\n * allowance.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * Emits a {Transfer} event.\n */\n function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);\n\n /**\n * @dev Emitted when `value` tokens are moved from one account (`from`) to\n * another (`to`).\n *\n * Note that `value` may be zero.\n */\n event Transfer(address indexed from, address indexed to, uint256 value);\n\n /**\n * @dev Emitted when the allowance of a `spender` for an `owner` is set by\n * a call to {approve}. `value` is the new allowance.\n */\n event Approval(address indexed owner, address indexed spender, uint256 value);\n}\n" | |
| }, | |
| "@openzeppelin/contracts/utils/Address.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\n\npragma solidity >=0.6.2 <0.8.0;\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary Address {\n /**\n * @dev Returns true if `account` is a contract.\n *\n * [IMPORTANT]\n * ====\n * It is unsafe to assume that an address for which this function returns\n * false is an externally-owned account (EOA) and not a contract.\n *\n * Among others, `isContract` will return false for the following\n * types of addresses:\n *\n * - an externally-owned account\n * - a contract in construction\n * - an address where a contract will be created\n * - an address where a contract lived, but was destroyed\n * ====\n */\n function isContract(address account) internal view returns (bool) {\n // This method relies on extcodesize, which returns 0 for contracts in\n // construction, since the code is only stored at the end of the\n // constructor execution.\n\n uint256 size;\n // solhint-disable-next-line no-inline-assembly\n assembly { size := extcodesize(account) }\n return size > 0;\n }\n\n /**\n * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n * `recipient`, forwarding all available gas and reverting on errors.\n *\n * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n * of certain opcodes, possibly making contracts go over the 2300 gas limit\n * imposed by `transfer`, making them unable to receive funds via\n * `transfer`. {sendValue} removes this limitation.\n *\n * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n *\n * IMPORTANT: because control is transferred to `recipient`, care must be\n * taken to not create reentrancy vulnerabilities. Consider using\n * {ReentrancyGuard} or the\n * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n */\n function sendValue(address payable recipient, uint256 amount) internal {\n require(address(this).balance >= amount, \"Address: insufficient balance\");\n\n // solhint-disable-next-line avoid-low-level-calls, avoid-call-value\n (bool success, ) = recipient.call{ value: amount }(\"\");\n require(success, \"Address: unable to send value, recipient may have reverted\");\n }\n\n /**\n * @dev Performs a Solidity function call using a low level `call`. A\n * plain`call` is an unsafe replacement for a function call: use this\n * function instead.\n *\n * If `target` reverts with a revert reason, it is bubbled up by this\n * function (like regular Solidity function calls).\n *\n * Returns the raw returned data. To convert to the expected return value,\n * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n *\n * Requirements:\n *\n * - `target` must be a contract.\n * - calling `target` with `data` must not revert.\n *\n * _Available since v3.1._\n */\n function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n return functionCall(target, data, \"Address: low-level call failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with\n * `errorMessage` as a fallback revert reason when `target` reverts.\n *\n * _Available since v3.1._\n */\n function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {\n return functionCallWithValue(target, data, 0, errorMessage);\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but also transferring `value` wei to `target`.\n *\n * Requirements:\n *\n * - the calling contract must have an ETH balance of at least `value`.\n * - the called Solidity function must be `payable`.\n *\n * _Available since v3.1._\n */\n function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {\n return functionCallWithValue(target, data, value, \"Address: low-level call with value failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but\n * with `errorMessage` as a fallback revert reason when `target` reverts.\n *\n * _Available since v3.1._\n */\n function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {\n require(address(this).balance >= value, \"Address: insufficient balance for call\");\n require(isContract(target), \"Address: call to non-contract\");\n\n // solhint-disable-next-line avoid-low-level-calls\n (bool success, bytes memory returndata) = target.call{ value: value }(data);\n return _verifyCallResult(success, returndata, errorMessage);\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but performing a static call.\n *\n * _Available since v3.3._\n */\n function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n return functionStaticCall(target, data, \"Address: low-level static call failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n * but performing a static call.\n *\n * _Available since v3.3._\n */\n function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {\n require(isContract(target), \"Address: static call to non-contract\");\n\n // solhint-disable-next-line avoid-low-level-calls\n (bool success, bytes memory returndata) = target.staticcall(data);\n return _verifyCallResult(success, returndata, errorMessage);\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but performing a delegate call.\n *\n * _Available since v3.4._\n */\n function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {\n return functionDelegateCall(target, data, \"Address: low-level delegate call failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n * but performing a delegate call.\n *\n * _Available since v3.4._\n */\n function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {\n require(isContract(target), \"Address: delegate call to non-contract\");\n\n // solhint-disable-next-line avoid-low-level-calls\n (bool success, bytes memory returndata) = target.delegatecall(data);\n return _verifyCallResult(success, returndata, errorMessage);\n }\n\n function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {\n if (success) {\n return returndata;\n } else {\n // Look for revert reason and bubble it up if present\n if (returndata.length > 0) {\n // The easiest way to bubble the revert reason is using memory via assembly\n\n // solhint-disable-next-line no-inline-assembly\n assembly {\n let returndata_size := mload(returndata)\n revert(add(32, returndata), returndata_size)\n }\n } else {\n revert(errorMessage);\n }\n }\n }\n}\n" | |
| } | |
| }, | |
| "settings": { | |
| "optimizer": { | |
| "enabled": true, | |
| "runs": 1000000 | |
| }, | |
| "outputSelection": { | |
| "*": { | |
| "*": [ | |
| "evm.bytecode", | |
| "evm.deployedBytecode", | |
| "devdoc", | |
| "userdoc", | |
| "metadata", | |
| "abi" | |
| ] | |
| } | |
| }, | |
| "metadata": { | |
| "useLiteralContent": true | |
| }, | |
| "libraries": {} | |
| } | |
| } |