| { | |
| "language": "Solidity", | |
| "sources": { | |
| "contracts/Adapters/SeaportAdapter.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\npragma solidity 0.8.4;\n\nimport \"./interfaces/ISeaportAdapter.sol\";\nimport \"@openzeppelin/contracts/token/ERC721/IERC721.sol\";\nimport \"@openzeppelin/contracts/token/ERC1155/IERC1155.sol\";\nimport \"@openzeppelin/contracts/token/ERC20/IERC20.sol\";\nimport \"@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol\";\nimport \"@openzeppelin/contracts/token/ERC721/utils/ERC721Holder.sol\";\nimport \"@openzeppelin/contracts/token/ERC1155/utils/ERC1155Holder.sol\";\nimport \"@openzeppelin/contracts/access/Ownable.sol\";\nimport \"@openzeppelin/contracts/utils/Address.sol\";\nimport \"@openzeppelin/contracts/security/ReentrancyGuard.sol\";\nimport \"@openzeppelin/contracts/utils/introspection/IERC165.sol\";\nimport \"./interfaces/IConduitController.sol\";\n\ncontract SeaportAdapter is\nOwnable,\nReentrancyGuard,\nERC1155Holder,\nERC721Holder\n{\n address public seaport;\n\n bytes4 public constant IID_IERC1155 = type(IERC1155).interfaceId;\n\n bytes4 public constant IID_IERC721 = type(IERC721).interfaceId;\n\n address public conduitControllerAddress;\n\n bytes32 public OPENSEA_CONDUIT_KEY =\n 0x0000007b02230091a7ed01230072f7006a004d60a8d4e71d599b8104250f0000;\n\n using SafeERC20 for IERC20;\n\n receive() external payable {\n // Reject unexpected address sending ether, only accecpt Seaport refunding.\n require(msg.sender == seaport, \"Unexpected ether sender\");\n }\n\n constructor(address _seaport) {\n seaport = _seaport;\n }\n\n /// @dev set seaport address\n ///\n /// @param _seaport new seaport address\n function setSeaportAddress(address _seaport) external onlyOwner {\n seaport = _seaport;\n }\n\n function setConduitController(address _conduitControllerAddress)\n external\n onlyOwner\n {\n conduitControllerAddress = _conduitControllerAddress;\n }\n\n function setConduitKey(bytes32 key) external onlyOwner {\n OPENSEA_CONDUIT_KEY = key;\n }\n\n /// @dev Buy NFT in seaport market place on behalf of user.\n ///\n /// @param _calldata abi encoded calldata to Seaport market place.\n /// @param recipient NFT's final receiver. NOTE: it also used as the refunding receiver instead of the msg.sender。\n /// We assume `recipient` is an EOA, otherwise the NFT may stuck in this contract.\n /// @param tokenAddress NFT contract address\n /// @param tokenId token id\n /// @param amount token amount, useful for ERC1155 token\n /// @param payToken address(0) is native,other address is erc20\n /// @param payAmount is price*amount\n function seaportBuy(\n bytes calldata _calldata,\n address recipient,\n address tokenAddress,\n uint256 tokenId,\n uint256 amount,\n address payToken,\n uint256 payAmount\n ) external payable nonReentrant {\n bool success;\n\n if (payToken != address(0)) {\n IERC20(payToken).safeTransferFrom(\n recipient,\n address(this),\n payAmount\n );\n\n (address conduit, bool hasConduit) = IConduitController(\n conduitControllerAddress\n ).getConduit(OPENSEA_CONDUIT_KEY);\n\n require(hasConduit, \"conduit controller address error!\");\n\n IERC20(payToken).safeApprove(conduit, payAmount);\n\n (success, ) = seaport.call(_calldata);\n } else {\n (success, ) = seaport.call{value: msg.value}(_calldata);\n }\n\n require(success, \"Seaport buy failed\");\n\n // NOTE: Caller must guarantee that the `recipient` is the expected NFT receiver.\n _tranferNFT(tokenAddress, address(this), recipient, tokenId, amount);\n\n if (payToken == address(0)) {\n // Refund to `recipient` when buy NFT failed or Seaport gives back remaining ether.\n // NOTE: Caller must guarantee that the `recipient` is the expected refunding receiver.\n uint256 refund = address(this).balance;\n if (refund > 0) {\n Address.sendValue(payable(recipient), refund);\n }\n }\n }\n\n /// @dev Accept offer on seaport market place on behalf of user.\n ///\n /// @param _calldata abi encoded calldata to Seaport market place.\n /// @param acceptToken ERC20 token received after accept offer.\n /// @param recipient Accept token receiver and NFT offerer.\n /// @param tokenAddress NFT contract address.\n /// @param tokenId token id.\n /// @param amount token amount, useful for ERC1155 token.\n function seaportAcceptOffer(\n bytes calldata _calldata,\n address acceptToken,\n address recipient,\n address tokenAddress,\n uint256 tokenId,\n uint256 amount\n ) external nonReentrant {\n // transfer recipient's NFT to this contract.\n _tranferNFT(tokenAddress, recipient, address(this), tokenId, amount);\n\n (address conduit, bool hasConduit) = IConduitController(\n conduitControllerAddress\n ).getConduit(OPENSEA_CONDUIT_KEY);\n require(hasConduit, \"conduit controller address error!\");\n\n // both ERC721 and ERC1155 share the same `setApprovalForAll` method.\n IERC721(tokenAddress).setApprovalForAll(conduit, true);\n\n // accept offer on seaport.\n (bool success, ) = seaport.call(_calldata);\n require(success, \"Seaport accept offer failed\");\n\n // transfer ERC20 to recipient.\n SafeERC20.safeTransfer(\n IERC20(acceptToken),\n recipient,\n IERC20(acceptToken).balanceOf(address(this))\n );\n\n // revoke approval.\n IERC721(tokenAddress).setApprovalForAll(conduit, false);\n }\n\n /// @dev In case we can withdraw unexpectedly stucked NFT.\n ///\n /// @param tokenAddress NFT contract address\n /// @param recipient token recipient\n /// @param tokenId token id\n /// @param amount token amount, useful for ERC1155 token\n function withdrawNFT(\n address tokenAddress,\n address recipient,\n uint256 tokenId,\n uint256 amount\n ) external onlyOwner {\n _tranferNFT(tokenAddress, address(this), recipient, tokenId, amount);\n }\n\n /// @dev Withdraw eth\n ///\n /// @param recipient ether recipient\n /// @param amount ether amount\n function withdrawETH(address recipient, uint256 amount) external onlyOwner {\n Address.sendValue(payable(recipient), amount);\n }\n\n /// @dev Withdraw erc20 token\n ///\n /// @param tokenAddress ERC20 token address\n /// @param recipient token recipient\n /// @param amount withraw amount\n function withdrawERC20(\n address tokenAddress,\n address recipient,\n uint256 amount\n ) external onlyOwner {\n SafeERC20.safeTransfer(IERC20(tokenAddress), recipient, amount);\n }\n\n function _tranferNFT(\n address tokenAddress,\n address from,\n address recipient,\n uint256 tokenId,\n uint256 amount\n ) internal {\n if (IERC165(tokenAddress).supportsInterface(IID_IERC721)) {\n IERC721(tokenAddress).safeTransferFrom(\n from,\n recipient,\n tokenId,\n \"\"\n );\n } else if (IERC165(tokenAddress).supportsInterface(IID_IERC1155)) {\n IERC1155(tokenAddress).safeTransferFrom(\n from,\n recipient,\n tokenId,\n amount,\n \"\"\n );\n } else {\n revert(\"Unsupported interface\");\n }\n }\n\n //old version\n function seaportBuy(\n bytes calldata _calldata,\n address recipient,\n address tokenAddress,\n uint256 tokenId,\n uint256 amount\n ) external payable nonReentrant {\n (bool success, ) = seaport.call{value: msg.value}(_calldata);\n\n require(success, \"Seaport buy failed\");\n\n // NOTE: Caller must guarantee that the `recipient` is the expected NFT receiver.\n _tranferNFT(tokenAddress, address(this),recipient, tokenId, amount);\n\n // Refund to `recipient` when buy NFT failed or Seaport gives back remaining ether.\n // NOTE: Caller must guarantee that the `recipient` is the expected refunding receiver.\n uint256 refund = address(this).balance;\n if (refund > 0) {\n Address.sendValue(payable(recipient), refund);\n }\n }\n\n\n}\n" | |
| }, | |
| "contracts/Adapters/interfaces/ISeaportAdapter.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\npragma solidity 0.8.4;\n\ninterface ISeaportAdapter {\n\n function seaportBuy(\n bytes calldata _calldata,\n address recipient,\n address tokenAddress,\n uint256 tokenId,\n uint256 amount,\n address payToken,\n uint256 payAmount\n\n ) external payable;\n\n function seaportAccetpOffer(\n bytes calldata _calldata,\n address acceptToken,\n address recipient,\n address tokenAddress,\n uint256 tokenId,\n uint256 amount\n ) external;\n}\n" | |
| }, | |
| "@openzeppelin/contracts/token/ERC721/IERC721.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../../utils/introspection/IERC165.sol\";\n\n/**\n * @dev Required interface of an ERC721 compliant contract.\n */\ninterface IERC721 is IERC165 {\n /**\n * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n */\n event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n /**\n * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n */\n event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n /**\n * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.\n */\n event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n /**\n * @dev Returns the number of tokens in ``owner``'s account.\n */\n function balanceOf(address owner) external view returns (uint256 balance);\n\n /**\n * @dev Returns the owner of the `tokenId` token.\n *\n * Requirements:\n *\n * - `tokenId` must exist.\n */\n function ownerOf(uint256 tokenId) external view returns (address owner);\n\n /**\n * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients\n * are aware of the ERC721 protocol to prevent tokens from being forever locked.\n *\n * Requirements:\n *\n * - `from` cannot be the zero address.\n * - `to` cannot be the zero address.\n * - `tokenId` token must exist and be owned by `from`.\n * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.\n * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n *\n * Emits a {Transfer} event.\n */\n function safeTransferFrom(\n address from,\n address to,\n uint256 tokenId\n ) external;\n\n /**\n * @dev Transfers `tokenId` token from `from` to `to`.\n *\n * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.\n *\n * Requirements:\n *\n * - `from` cannot be the zero address.\n * - `to` cannot be the zero address.\n * - `tokenId` token must be owned by `from`.\n * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n *\n * Emits a {Transfer} event.\n */\n function transferFrom(\n address from,\n address to,\n uint256 tokenId\n ) external;\n\n /**\n * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n * The approval is cleared when the token is transferred.\n *\n * Only a single account can be approved at a time, so approving the zero address clears previous approvals.\n *\n * Requirements:\n *\n * - The caller must own the token or be an approved operator.\n * - `tokenId` must exist.\n *\n * Emits an {Approval} event.\n */\n function approve(address to, uint256 tokenId) external;\n\n /**\n * @dev Returns the account approved for `tokenId` token.\n *\n * Requirements:\n *\n * - `tokenId` must exist.\n */\n function getApproved(uint256 tokenId) external view returns (address operator);\n\n /**\n * @dev Approve or remove `operator` as an operator for the caller.\n * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.\n *\n * Requirements:\n *\n * - The `operator` cannot be the caller.\n *\n * Emits an {ApprovalForAll} event.\n */\n function setApprovalForAll(address operator, bool _approved) external;\n\n /**\n * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n *\n * See {setApprovalForAll}\n */\n function isApprovedForAll(address owner, address operator) external view returns (bool);\n\n /**\n * @dev Safely transfers `tokenId` token from `from` to `to`.\n *\n * Requirements:\n *\n * - `from` cannot be the zero address.\n * - `to` cannot be the zero address.\n * - `tokenId` token must exist and be owned by `from`.\n * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n *\n * Emits a {Transfer} event.\n */\n function safeTransferFrom(\n address from,\n address to,\n uint256 tokenId,\n bytes calldata data\n ) external;\n}\n" | |
| }, | |
| "@openzeppelin/contracts/token/ERC1155/IERC1155.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (token/ERC1155/IERC1155.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../../utils/introspection/IERC165.sol\";\n\n/**\n * @dev Required interface of an ERC1155 compliant contract, as defined in the\n * https://eips.ethereum.org/EIPS/eip-1155[EIP].\n *\n * _Available since v3.1._\n */\ninterface IERC1155 is IERC165 {\n /**\n * @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.\n */\n event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);\n\n /**\n * @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all\n * transfers.\n */\n event TransferBatch(\n address indexed operator,\n address indexed from,\n address indexed to,\n uint256[] ids,\n uint256[] values\n );\n\n /**\n * @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to\n * `approved`.\n */\n event ApprovalForAll(address indexed account, address indexed operator, bool approved);\n\n /**\n * @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.\n *\n * If an {URI} event was emitted for `id`, the standard\n * https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value\n * returned by {IERC1155MetadataURI-uri}.\n */\n event URI(string value, uint256 indexed id);\n\n /**\n * @dev Returns the amount of tokens of token type `id` owned by `account`.\n *\n * Requirements:\n *\n * - `account` cannot be the zero address.\n */\n function balanceOf(address account, uint256 id) external view returns (uint256);\n\n /**\n * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.\n *\n * Requirements:\n *\n * - `accounts` and `ids` must have the same length.\n */\n function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)\n external\n view\n returns (uint256[] memory);\n\n /**\n * @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,\n *\n * Emits an {ApprovalForAll} event.\n *\n * Requirements:\n *\n * - `operator` cannot be the caller.\n */\n function setApprovalForAll(address operator, bool approved) external;\n\n /**\n * @dev Returns true if `operator` is approved to transfer ``account``'s tokens.\n *\n * See {setApprovalForAll}.\n */\n function isApprovedForAll(address account, address operator) external view returns (bool);\n\n /**\n * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.\n *\n * Emits a {TransferSingle} event.\n *\n * Requirements:\n *\n * - `to` cannot be the zero address.\n * - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.\n * - `from` must have a balance of tokens of type `id` of at least `amount`.\n * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the\n * acceptance magic value.\n */\n function safeTransferFrom(\n address from,\n address to,\n uint256 id,\n uint256 amount,\n bytes calldata data\n ) external;\n\n /**\n * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.\n *\n * Emits a {TransferBatch} event.\n *\n * Requirements:\n *\n * - `ids` and `amounts` must have the same length.\n * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the\n * acceptance magic value.\n */\n function safeBatchTransferFrom(\n address from,\n address to,\n uint256[] calldata ids,\n uint256[] calldata amounts,\n bytes calldata data\n ) external;\n}\n" | |
| }, | |
| "@openzeppelin/contracts/token/ERC20/IERC20.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (token/ERC20/IERC20.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC20 standard as defined in the EIP.\n */\ninterface IERC20 {\n /**\n * @dev Returns the amount of tokens in existence.\n */\n function totalSupply() external view returns (uint256);\n\n /**\n * @dev Returns the amount of tokens owned by `account`.\n */\n function balanceOf(address account) external view returns (uint256);\n\n /**\n * @dev Moves `amount` tokens from the caller's account to `recipient`.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * Emits a {Transfer} event.\n */\n function transfer(address recipient, uint256 amount) external returns (bool);\n\n /**\n * @dev Returns the remaining number of tokens that `spender` will be\n * allowed to spend on behalf of `owner` through {transferFrom}. This is\n * zero by default.\n *\n * This value changes when {approve} or {transferFrom} are called.\n */\n function allowance(address owner, address spender) external view returns (uint256);\n\n /**\n * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * IMPORTANT: Beware that changing an allowance with this method brings the risk\n * that someone may use both the old and the new allowance by unfortunate\n * transaction ordering. One possible solution to mitigate this race\n * condition is to first reduce the spender's allowance to 0 and set the\n * desired value afterwards:\n * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n *\n * Emits an {Approval} event.\n */\n function approve(address spender, uint256 amount) external returns (bool);\n\n /**\n * @dev Moves `amount` tokens from `sender` to `recipient` using the\n * allowance mechanism. `amount` is then deducted from the caller's\n * allowance.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * Emits a {Transfer} event.\n */\n function transferFrom(\n address sender,\n address recipient,\n uint256 amount\n ) external returns (bool);\n\n /**\n * @dev Emitted when `value` tokens are moved from one account (`from`) to\n * another (`to`).\n *\n * Note that `value` may be zero.\n */\n event Transfer(address indexed from, address indexed to, uint256 value);\n\n /**\n * @dev Emitted when the allowance of a `spender` for an `owner` is set by\n * a call to {approve}. `value` is the new allowance.\n */\n event Approval(address indexed owner, address indexed spender, uint256 value);\n}\n" | |
| }, | |
| "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../IERC20.sol\";\nimport \"../../../utils/Address.sol\";\n\n/**\n * @title SafeERC20\n * @dev Wrappers around ERC20 operations that throw on failure (when the token\n * contract returns false). Tokens that return no value (and instead revert or\n * throw on failure) are also supported, non-reverting calls are assumed to be\n * successful.\n * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,\n * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.\n */\nlibrary SafeERC20 {\n using Address for address;\n\n function safeTransfer(\n IERC20 token,\n address to,\n uint256 value\n ) internal {\n _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));\n }\n\n function safeTransferFrom(\n IERC20 token,\n address from,\n address to,\n uint256 value\n ) internal {\n _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));\n }\n\n /**\n * @dev Deprecated. This function has issues similar to the ones found in\n * {IERC20-approve}, and its usage is discouraged.\n *\n * Whenever possible, use {safeIncreaseAllowance} and\n * {safeDecreaseAllowance} instead.\n */\n function safeApprove(\n IERC20 token,\n address spender,\n uint256 value\n ) internal {\n // safeApprove should only be called when setting an initial allowance,\n // or when resetting it to zero. To increase and decrease it, use\n // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'\n require(\n (value == 0) || (token.allowance(address(this), spender) == 0),\n \"SafeERC20: approve from non-zero to non-zero allowance\"\n );\n _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));\n }\n\n function safeIncreaseAllowance(\n IERC20 token,\n address spender,\n uint256 value\n ) internal {\n uint256 newAllowance = token.allowance(address(this), spender) + value;\n _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));\n }\n\n function safeDecreaseAllowance(\n IERC20 token,\n address spender,\n uint256 value\n ) internal {\n unchecked {\n uint256 oldAllowance = token.allowance(address(this), spender);\n require(oldAllowance >= value, \"SafeERC20: decreased allowance below zero\");\n uint256 newAllowance = oldAllowance - value;\n _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));\n }\n }\n\n /**\n * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement\n * on the return value: the return value is optional (but if data is returned, it must not be false).\n * @param token The token targeted by the call.\n * @param data The call data (encoded using abi.encode or one of its variants).\n */\n function _callOptionalReturn(IERC20 token, bytes memory data) private {\n // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since\n // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that\n // the target address contains contract code and also asserts for success in the low-level call.\n\n bytes memory returndata = address(token).functionCall(data, \"SafeERC20: low-level call failed\");\n if (returndata.length > 0) {\n // Return data is optional\n require(abi.decode(returndata, (bool)), \"SafeERC20: ERC20 operation did not succeed\");\n }\n }\n}\n" | |
| }, | |
| "@openzeppelin/contracts/token/ERC721/utils/ERC721Holder.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (token/ERC721/utils/ERC721Holder.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../IERC721Receiver.sol\";\n\n/**\n * @dev Implementation of the {IERC721Receiver} interface.\n *\n * Accepts all token transfers.\n * Make sure the contract is able to use its token with {IERC721-safeTransferFrom}, {IERC721-approve} or {IERC721-setApprovalForAll}.\n */\ncontract ERC721Holder is IERC721Receiver {\n /**\n * @dev See {IERC721Receiver-onERC721Received}.\n *\n * Always returns `IERC721Receiver.onERC721Received.selector`.\n */\n function onERC721Received(\n address,\n address,\n uint256,\n bytes memory\n ) public virtual override returns (bytes4) {\n return this.onERC721Received.selector;\n }\n}\n" | |
| }, | |
| "@openzeppelin/contracts/token/ERC1155/utils/ERC1155Holder.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (token/ERC1155/utils/ERC1155Holder.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./ERC1155Receiver.sol\";\n\n/**\n * @dev _Available since v3.1._\n */\ncontract ERC1155Holder is ERC1155Receiver {\n function onERC1155Received(\n address,\n address,\n uint256,\n uint256,\n bytes memory\n ) public virtual override returns (bytes4) {\n return this.onERC1155Received.selector;\n }\n\n function onERC1155BatchReceived(\n address,\n address,\n uint256[] memory,\n uint256[] memory,\n bytes memory\n ) public virtual override returns (bytes4) {\n return this.onERC1155BatchReceived.selector;\n }\n}\n" | |
| }, | |
| "@openzeppelin/contracts/access/Ownable.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../utils/Context.sol\";\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * By default, the owner account will be the one that deploys the contract. This\n * can later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n address private _owner;\n\n event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n /**\n * @dev Initializes the contract setting the deployer as the initial owner.\n */\n constructor() {\n _transferOwnership(_msgSender());\n }\n\n /**\n * @dev Returns the address of the current owner.\n */\n function owner() public view virtual returns (address) {\n return _owner;\n }\n\n /**\n * @dev Throws if called by any account other than the owner.\n */\n modifier onlyOwner() {\n require(owner() == _msgSender(), \"Ownable: caller is not the owner\");\n _;\n }\n\n /**\n * @dev Leaves the contract without owner. It will not be possible to call\n * `onlyOwner` functions anymore. Can only be called by the current owner.\n *\n * NOTE: Renouncing ownership will leave the contract without an owner,\n * thereby removing any functionality that is only available to the owner.\n */\n function renounceOwnership() public virtual onlyOwner {\n _transferOwnership(address(0));\n }\n\n /**\n * @dev Transfers ownership of the contract to a new account (`newOwner`).\n * Can only be called by the current owner.\n */\n function transferOwnership(address newOwner) public virtual onlyOwner {\n require(newOwner != address(0), \"Ownable: new owner is the zero address\");\n _transferOwnership(newOwner);\n }\n\n /**\n * @dev Transfers ownership of the contract to a new account (`newOwner`).\n * Internal function without access restriction.\n */\n function _transferOwnership(address newOwner) internal virtual {\n address oldOwner = _owner;\n _owner = newOwner;\n emit OwnershipTransferred(oldOwner, newOwner);\n }\n}\n" | |
| }, | |
| "@openzeppelin/contracts/utils/Address.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary Address {\n /**\n * @dev Returns true if `account` is a contract.\n *\n * [IMPORTANT]\n * ====\n * It is unsafe to assume that an address for which this function returns\n * false is an externally-owned account (EOA) and not a contract.\n *\n * Among others, `isContract` will return false for the following\n * types of addresses:\n *\n * - an externally-owned account\n * - a contract in construction\n * - an address where a contract will be created\n * - an address where a contract lived, but was destroyed\n * ====\n */\n function isContract(address account) internal view returns (bool) {\n // This method relies on extcodesize, which returns 0 for contracts in\n // construction, since the code is only stored at the end of the\n // constructor execution.\n\n uint256 size;\n assembly {\n size := extcodesize(account)\n }\n return size > 0;\n }\n\n /**\n * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n * `recipient`, forwarding all available gas and reverting on errors.\n *\n * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n * of certain opcodes, possibly making contracts go over the 2300 gas limit\n * imposed by `transfer`, making them unable to receive funds via\n * `transfer`. {sendValue} removes this limitation.\n *\n * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n *\n * IMPORTANT: because control is transferred to `recipient`, care must be\n * taken to not create reentrancy vulnerabilities. Consider using\n * {ReentrancyGuard} or the\n * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n */\n function sendValue(address payable recipient, uint256 amount) internal {\n require(address(this).balance >= amount, \"Address: insufficient balance\");\n\n (bool success, ) = recipient.call{value: amount}(\"\");\n require(success, \"Address: unable to send value, recipient may have reverted\");\n }\n\n /**\n * @dev Performs a Solidity function call using a low level `call`. A\n * plain `call` is an unsafe replacement for a function call: use this\n * function instead.\n *\n * If `target` reverts with a revert reason, it is bubbled up by this\n * function (like regular Solidity function calls).\n *\n * Returns the raw returned data. To convert to the expected return value,\n * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n *\n * Requirements:\n *\n * - `target` must be a contract.\n * - calling `target` with `data` must not revert.\n *\n * _Available since v3.1._\n */\n function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n return functionCall(target, data, \"Address: low-level call failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with\n * `errorMessage` as a fallback revert reason when `target` reverts.\n *\n * _Available since v3.1._\n */\n function functionCall(\n address target,\n bytes memory data,\n string memory errorMessage\n ) internal returns (bytes memory) {\n return functionCallWithValue(target, data, 0, errorMessage);\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but also transferring `value` wei to `target`.\n *\n * Requirements:\n *\n * - the calling contract must have an ETH balance of at least `value`.\n * - the called Solidity function must be `payable`.\n *\n * _Available since v3.1._\n */\n function functionCallWithValue(\n address target,\n bytes memory data,\n uint256 value\n ) internal returns (bytes memory) {\n return functionCallWithValue(target, data, value, \"Address: low-level call with value failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but\n * with `errorMessage` as a fallback revert reason when `target` reverts.\n *\n * _Available since v3.1._\n */\n function functionCallWithValue(\n address target,\n bytes memory data,\n uint256 value,\n string memory errorMessage\n ) internal returns (bytes memory) {\n require(address(this).balance >= value, \"Address: insufficient balance for call\");\n require(isContract(target), \"Address: call to non-contract\");\n\n (bool success, bytes memory returndata) = target.call{value: value}(data);\n return verifyCallResult(success, returndata, errorMessage);\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but performing a static call.\n *\n * _Available since v3.3._\n */\n function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n return functionStaticCall(target, data, \"Address: low-level static call failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n * but performing a static call.\n *\n * _Available since v3.3._\n */\n function functionStaticCall(\n address target,\n bytes memory data,\n string memory errorMessage\n ) internal view returns (bytes memory) {\n require(isContract(target), \"Address: static call to non-contract\");\n\n (bool success, bytes memory returndata) = target.staticcall(data);\n return verifyCallResult(success, returndata, errorMessage);\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but performing a delegate call.\n *\n * _Available since v3.4._\n */\n function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {\n return functionDelegateCall(target, data, \"Address: low-level delegate call failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n * but performing a delegate call.\n *\n * _Available since v3.4._\n */\n function functionDelegateCall(\n address target,\n bytes memory data,\n string memory errorMessage\n ) internal returns (bytes memory) {\n require(isContract(target), \"Address: delegate call to non-contract\");\n\n (bool success, bytes memory returndata) = target.delegatecall(data);\n return verifyCallResult(success, returndata, errorMessage);\n }\n\n /**\n * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the\n * revert reason using the provided one.\n *\n * _Available since v4.3._\n */\n function verifyCallResult(\n bool success,\n bytes memory returndata,\n string memory errorMessage\n ) internal pure returns (bytes memory) {\n if (success) {\n return returndata;\n } else {\n // Look for revert reason and bubble it up if present\n if (returndata.length > 0) {\n // The easiest way to bubble the revert reason is using memory via assembly\n\n assembly {\n let returndata_size := mload(returndata)\n revert(add(32, returndata), returndata_size)\n }\n } else {\n revert(errorMessage);\n }\n }\n }\n}\n" | |
| }, | |
| "@openzeppelin/contracts/security/ReentrancyGuard.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Contract module that helps prevent reentrant calls to a function.\n *\n * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier\n * available, which can be applied to functions to make sure there are no nested\n * (reentrant) calls to them.\n *\n * Note that because there is a single `nonReentrant` guard, functions marked as\n * `nonReentrant` may not call one another. This can be worked around by making\n * those functions `private`, and then adding `external` `nonReentrant` entry\n * points to them.\n *\n * TIP: If you would like to learn more about reentrancy and alternative ways\n * to protect against it, check out our blog post\n * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].\n */\nabstract contract ReentrancyGuard {\n // Booleans are more expensive than uint256 or any type that takes up a full\n // word because each write operation emits an extra SLOAD to first read the\n // slot's contents, replace the bits taken up by the boolean, and then write\n // back. This is the compiler's defense against contract upgrades and\n // pointer aliasing, and it cannot be disabled.\n\n // The values being non-zero value makes deployment a bit more expensive,\n // but in exchange the refund on every call to nonReentrant will be lower in\n // amount. Since refunds are capped to a percentage of the total\n // transaction's gas, it is best to keep them low in cases like this one, to\n // increase the likelihood of the full refund coming into effect.\n uint256 private constant _NOT_ENTERED = 1;\n uint256 private constant _ENTERED = 2;\n\n uint256 private _status;\n\n constructor() {\n _status = _NOT_ENTERED;\n }\n\n /**\n * @dev Prevents a contract from calling itself, directly or indirectly.\n * Calling a `nonReentrant` function from another `nonReentrant`\n * function is not supported. It is possible to prevent this from happening\n * by making the `nonReentrant` function external, and making it call a\n * `private` function that does the actual work.\n */\n modifier nonReentrant() {\n // On the first call to nonReentrant, _notEntered will be true\n require(_status != _ENTERED, \"ReentrancyGuard: reentrant call\");\n\n // Any calls to nonReentrant after this point will fail\n _status = _ENTERED;\n\n _;\n\n // By storing the original value once again, a refund is triggered (see\n // https://eips.ethereum.org/EIPS/eip-2200)\n _status = _NOT_ENTERED;\n }\n}\n" | |
| }, | |
| "@openzeppelin/contracts/utils/introspection/IERC165.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[EIP].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n /**\n * @dev Returns true if this contract implements the interface defined by\n * `interfaceId`. See the corresponding\n * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]\n * to learn more about how these ids are created.\n *\n * This function call must use less than 30 000 gas.\n */\n function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n" | |
| }, | |
| "contracts/Adapters/interfaces/IConduitController.sol": { | |
| "content": "pragma solidity ^0.8.0;\n\ninterface IConduitController {\n\n function getConduit(bytes32 conduitKey) external view returns (address conduit, bool exists);\n\n}\n" | |
| }, | |
| "@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @title ERC721 token receiver interface\n * @dev Interface for any contract that wants to support safeTransfers\n * from ERC721 asset contracts.\n */\ninterface IERC721Receiver {\n /**\n * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}\n * by `operator` from `from`, this function is called.\n *\n * It must return its Solidity selector to confirm the token transfer.\n * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.\n *\n * The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.\n */\n function onERC721Received(\n address operator,\n address from,\n uint256 tokenId,\n bytes calldata data\n ) external returns (bytes4);\n}\n" | |
| }, | |
| "@openzeppelin/contracts/token/ERC1155/utils/ERC1155Receiver.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (token/ERC1155/utils/ERC1155Receiver.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../IERC1155Receiver.sol\";\nimport \"../../../utils/introspection/ERC165.sol\";\n\n/**\n * @dev _Available since v3.1._\n */\nabstract contract ERC1155Receiver is ERC165, IERC1155Receiver {\n /**\n * @dev See {IERC165-supportsInterface}.\n */\n function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {\n return interfaceId == type(IERC1155Receiver).interfaceId || super.supportsInterface(interfaceId);\n }\n}\n" | |
| }, | |
| "@openzeppelin/contracts/token/ERC1155/IERC1155Receiver.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (token/ERC1155/IERC1155Receiver.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../../utils/introspection/IERC165.sol\";\n\n/**\n * @dev _Available since v3.1._\n */\ninterface IERC1155Receiver is IERC165 {\n /**\n @dev Handles the receipt of a single ERC1155 token type. This function is\n called at the end of a `safeTransferFrom` after the balance has been updated.\n To accept the transfer, this must return\n `bytes4(keccak256(\"onERC1155Received(address,address,uint256,uint256,bytes)\"))`\n (i.e. 0xf23a6e61, or its own function selector).\n @param operator The address which initiated the transfer (i.e. msg.sender)\n @param from The address which previously owned the token\n @param id The ID of the token being transferred\n @param value The amount of tokens being transferred\n @param data Additional data with no specified format\n @return `bytes4(keccak256(\"onERC1155Received(address,address,uint256,uint256,bytes)\"))` if transfer is allowed\n */\n function onERC1155Received(\n address operator,\n address from,\n uint256 id,\n uint256 value,\n bytes calldata data\n ) external returns (bytes4);\n\n /**\n @dev Handles the receipt of a multiple ERC1155 token types. This function\n is called at the end of a `safeBatchTransferFrom` after the balances have\n been updated. To accept the transfer(s), this must return\n `bytes4(keccak256(\"onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)\"))`\n (i.e. 0xbc197c81, or its own function selector).\n @param operator The address which initiated the batch transfer (i.e. msg.sender)\n @param from The address which previously owned the token\n @param ids An array containing ids of each token being transferred (order and length must match values array)\n @param values An array containing amounts of each token being transferred (order and length must match ids array)\n @param data Additional data with no specified format\n @return `bytes4(keccak256(\"onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)\"))` if transfer is allowed\n */\n function onERC1155BatchReceived(\n address operator,\n address from,\n uint256[] calldata ids,\n uint256[] calldata values,\n bytes calldata data\n ) external returns (bytes4);\n}\n" | |
| }, | |
| "@openzeppelin/contracts/utils/introspection/ERC165.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./IERC165.sol\";\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n * return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n *\n * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.\n */\nabstract contract ERC165 is IERC165 {\n /**\n * @dev See {IERC165-supportsInterface}.\n */\n function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n return interfaceId == type(IERC165).interfaceId;\n }\n}\n" | |
| }, | |
| "@openzeppelin/contracts/utils/Context.sol": { | |
| "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n function _msgSender() internal view virtual returns (address) {\n return msg.sender;\n }\n\n function _msgData() internal view virtual returns (bytes calldata) {\n return msg.data;\n }\n}\n" | |
| } | |
| }, | |
| "settings": { | |
| "optimizer": { | |
| "enabled": true, | |
| "runs": 200 | |
| }, | |
| "outputSelection": { | |
| "*": { | |
| "*": [ | |
| "evm.bytecode", | |
| "evm.deployedBytecode", | |
| "devdoc", | |
| "userdoc", | |
| "metadata", | |
| "abi" | |
| ] | |
| } | |
| }, | |
| "libraries": {} | |
| } | |
| } |