zellic-audit
Initial commit
f998fcd
raw
history blame
94.3 kB
{
"language": "Solidity",
"sources": {
"lib/erc721a/contracts/ERC721A.sol": {
"content": "// SPDX-License-Identifier: MIT\n// ERC721A Contracts v4.2.3\n// Creator: Chiru Labs\n\npragma solidity ^0.8.4;\n\nimport './IERC721A.sol';\n\n/**\n * @dev Interface of ERC721 token receiver.\n */\ninterface ERC721A__IERC721Receiver {\n function onERC721Received(\n address operator,\n address from,\n uint256 tokenId,\n bytes calldata data\n ) external returns (bytes4);\n}\n\n/**\n * @title ERC721A\n *\n * @dev Implementation of the [ERC721](https://eips.ethereum.org/EIPS/eip-721)\n * Non-Fungible Token Standard, including the Metadata extension.\n * Optimized for lower gas during batch mints.\n *\n * Token IDs are minted in sequential order (e.g. 0, 1, 2, 3, ...)\n * starting from `_startTokenId()`.\n *\n * Assumptions:\n *\n * - An owner cannot have more than 2**64 - 1 (max value of uint64) of supply.\n * - The maximum token ID cannot exceed 2**256 - 1 (max value of uint256).\n */\ncontract ERC721A is IERC721A {\n // Bypass for a `--via-ir` bug (https://github.com/chiru-labs/ERC721A/pull/364).\n struct TokenApprovalRef {\n address value;\n }\n\n // =============================================================\n // CONSTANTS\n // =============================================================\n\n // Mask of an entry in packed address data.\n uint256 private constant _BITMASK_ADDRESS_DATA_ENTRY = (1 << 64) - 1;\n\n // The bit position of `numberMinted` in packed address data.\n uint256 private constant _BITPOS_NUMBER_MINTED = 64;\n\n // The bit position of `numberBurned` in packed address data.\n uint256 private constant _BITPOS_NUMBER_BURNED = 128;\n\n // The bit position of `aux` in packed address data.\n uint256 private constant _BITPOS_AUX = 192;\n\n // Mask of all 256 bits in packed address data except the 64 bits for `aux`.\n uint256 private constant _BITMASK_AUX_COMPLEMENT = (1 << 192) - 1;\n\n // The bit position of `startTimestamp` in packed ownership.\n uint256 private constant _BITPOS_START_TIMESTAMP = 160;\n\n // The bit mask of the `burned` bit in packed ownership.\n uint256 private constant _BITMASK_BURNED = 1 << 224;\n\n // The bit position of the `nextInitialized` bit in packed ownership.\n uint256 private constant _BITPOS_NEXT_INITIALIZED = 225;\n\n // The bit mask of the `nextInitialized` bit in packed ownership.\n uint256 private constant _BITMASK_NEXT_INITIALIZED = 1 << 225;\n\n // The bit position of `extraData` in packed ownership.\n uint256 private constant _BITPOS_EXTRA_DATA = 232;\n\n // Mask of all 256 bits in a packed ownership except the 24 bits for `extraData`.\n uint256 private constant _BITMASK_EXTRA_DATA_COMPLEMENT = (1 << 232) - 1;\n\n // The mask of the lower 160 bits for addresses.\n uint256 private constant _BITMASK_ADDRESS = (1 << 160) - 1;\n\n // The maximum `quantity` that can be minted with {_mintERC2309}.\n // This limit is to prevent overflows on the address data entries.\n // For a limit of 5000, a total of 3.689e15 calls to {_mintERC2309}\n // is required to cause an overflow, which is unrealistic.\n uint256 private constant _MAX_MINT_ERC2309_QUANTITY_LIMIT = 5000;\n\n // The `Transfer` event signature is given by:\n // `keccak256(bytes(\"Transfer(address,address,uint256)\"))`.\n bytes32 private constant _TRANSFER_EVENT_SIGNATURE =\n 0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef;\n\n // =============================================================\n // STORAGE\n // =============================================================\n\n // The next token ID to be minted.\n uint256 private _currentIndex;\n\n // The number of tokens burned.\n uint256 private _burnCounter;\n\n // Token name\n string private _name;\n\n // Token symbol\n string private _symbol;\n\n // Mapping from token ID to ownership details\n // An empty struct value does not necessarily mean the token is unowned.\n // See {_packedOwnershipOf} implementation for details.\n //\n // Bits Layout:\n // - [0..159] `addr`\n // - [160..223] `startTimestamp`\n // - [224] `burned`\n // - [225] `nextInitialized`\n // - [232..255] `extraData`\n mapping(uint256 => uint256) private _packedOwnerships;\n\n // Mapping owner address to address data.\n //\n // Bits Layout:\n // - [0..63] `balance`\n // - [64..127] `numberMinted`\n // - [128..191] `numberBurned`\n // - [192..255] `aux`\n mapping(address => uint256) private _packedAddressData;\n\n // Mapping from token ID to approved address.\n mapping(uint256 => TokenApprovalRef) private _tokenApprovals;\n\n // Mapping from owner to operator approvals\n mapping(address => mapping(address => bool)) private _operatorApprovals;\n\n // =============================================================\n // CONSTRUCTOR\n // =============================================================\n\n constructor(string memory name_, string memory symbol_) {\n _name = name_;\n _symbol = symbol_;\n _currentIndex = _startTokenId();\n }\n\n // =============================================================\n // TOKEN COUNTING OPERATIONS\n // =============================================================\n\n /**\n * @dev Returns the starting token ID.\n * To change the starting token ID, please override this function.\n */\n function _startTokenId() internal view virtual returns (uint256) {\n return 0;\n }\n\n /**\n * @dev Returns the next token ID to be minted.\n */\n function _nextTokenId() internal view virtual returns (uint256) {\n return _currentIndex;\n }\n\n /**\n * @dev Returns the total number of tokens in existence.\n * Burned tokens will reduce the count.\n * To get the total number of tokens minted, please see {_totalMinted}.\n */\n function totalSupply() public view virtual override returns (uint256) {\n // Counter underflow is impossible as _burnCounter cannot be incremented\n // more than `_currentIndex - _startTokenId()` times.\n unchecked {\n return _currentIndex - _burnCounter - _startTokenId();\n }\n }\n\n /**\n * @dev Returns the total amount of tokens minted in the contract.\n */\n function _totalMinted() internal view virtual returns (uint256) {\n // Counter underflow is impossible as `_currentIndex` does not decrement,\n // and it is initialized to `_startTokenId()`.\n unchecked {\n return _currentIndex - _startTokenId();\n }\n }\n\n /**\n * @dev Returns the total number of tokens burned.\n */\n function _totalBurned() internal view virtual returns (uint256) {\n return _burnCounter;\n }\n\n // =============================================================\n // ADDRESS DATA OPERATIONS\n // =============================================================\n\n /**\n * @dev Returns the number of tokens in `owner`'s account.\n */\n function balanceOf(address owner) public view virtual override returns (uint256) {\n if (owner == address(0)) revert BalanceQueryForZeroAddress();\n return _packedAddressData[owner] & _BITMASK_ADDRESS_DATA_ENTRY;\n }\n\n /**\n * Returns the number of tokens minted by `owner`.\n */\n function _numberMinted(address owner) internal view returns (uint256) {\n return (_packedAddressData[owner] >> _BITPOS_NUMBER_MINTED) & _BITMASK_ADDRESS_DATA_ENTRY;\n }\n\n /**\n * Returns the number of tokens burned by or on behalf of `owner`.\n */\n function _numberBurned(address owner) internal view returns (uint256) {\n return (_packedAddressData[owner] >> _BITPOS_NUMBER_BURNED) & _BITMASK_ADDRESS_DATA_ENTRY;\n }\n\n /**\n * Returns the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).\n */\n function _getAux(address owner) internal view returns (uint64) {\n return uint64(_packedAddressData[owner] >> _BITPOS_AUX);\n }\n\n /**\n * Sets the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).\n * If there are multiple variables, please pack them into a uint64.\n */\n function _setAux(address owner, uint64 aux) internal virtual {\n uint256 packed = _packedAddressData[owner];\n uint256 auxCasted;\n // Cast `aux` with assembly to avoid redundant masking.\n assembly {\n auxCasted := aux\n }\n packed = (packed & _BITMASK_AUX_COMPLEMENT) | (auxCasted << _BITPOS_AUX);\n _packedAddressData[owner] = packed;\n }\n\n // =============================================================\n // IERC165\n // =============================================================\n\n /**\n * @dev Returns true if this contract implements the interface defined by\n * `interfaceId`. See the corresponding\n * [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)\n * to learn more about how these ids are created.\n *\n * This function call must use less than 30000 gas.\n */\n function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n // The interface IDs are constants representing the first 4 bytes\n // of the XOR of all function selectors in the interface.\n // See: [ERC165](https://eips.ethereum.org/EIPS/eip-165)\n // (e.g. `bytes4(i.functionA.selector ^ i.functionB.selector ^ ...)`)\n return\n interfaceId == 0x01ffc9a7 || // ERC165 interface ID for ERC165.\n interfaceId == 0x80ac58cd || // ERC165 interface ID for ERC721.\n interfaceId == 0x5b5e139f; // ERC165 interface ID for ERC721Metadata.\n }\n\n // =============================================================\n // IERC721Metadata\n // =============================================================\n\n /**\n * @dev Returns the token collection name.\n */\n function name() public view virtual override returns (string memory) {\n return _name;\n }\n\n /**\n * @dev Returns the token collection symbol.\n */\n function symbol() public view virtual override returns (string memory) {\n return _symbol;\n }\n\n /**\n * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n */\n function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {\n if (!_exists(tokenId)) revert URIQueryForNonexistentToken();\n\n string memory baseURI = _baseURI();\n return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, _toString(tokenId))) : '';\n }\n\n /**\n * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each\n * token will be the concatenation of the `baseURI` and the `tokenId`. Empty\n * by default, it can be overridden in child contracts.\n */\n function _baseURI() internal view virtual returns (string memory) {\n return '';\n }\n\n // =============================================================\n // OWNERSHIPS OPERATIONS\n // =============================================================\n\n /**\n * @dev Returns the owner of the `tokenId` token.\n *\n * Requirements:\n *\n * - `tokenId` must exist.\n */\n function ownerOf(uint256 tokenId) public view virtual override returns (address) {\n return address(uint160(_packedOwnershipOf(tokenId)));\n }\n\n /**\n * @dev Gas spent here starts off proportional to the maximum mint batch size.\n * It gradually moves to O(1) as tokens get transferred around over time.\n */\n function _ownershipOf(uint256 tokenId) internal view virtual returns (TokenOwnership memory) {\n return _unpackedOwnership(_packedOwnershipOf(tokenId));\n }\n\n /**\n * @dev Returns the unpacked `TokenOwnership` struct at `index`.\n */\n function _ownershipAt(uint256 index) internal view virtual returns (TokenOwnership memory) {\n return _unpackedOwnership(_packedOwnerships[index]);\n }\n\n /**\n * @dev Initializes the ownership slot minted at `index` for efficiency purposes.\n */\n function _initializeOwnershipAt(uint256 index) internal virtual {\n if (_packedOwnerships[index] == 0) {\n _packedOwnerships[index] = _packedOwnershipOf(index);\n }\n }\n\n /**\n * Returns the packed ownership data of `tokenId`.\n */\n function _packedOwnershipOf(uint256 tokenId) private view returns (uint256) {\n uint256 curr = tokenId;\n\n unchecked {\n if (_startTokenId() <= curr)\n if (curr < _currentIndex) {\n uint256 packed = _packedOwnerships[curr];\n // If not burned.\n if (packed & _BITMASK_BURNED == 0) {\n // Invariant:\n // There will always be an initialized ownership slot\n // (i.e. `ownership.addr != address(0) && ownership.burned == false`)\n // before an unintialized ownership slot\n // (i.e. `ownership.addr == address(0) && ownership.burned == false`)\n // Hence, `curr` will not underflow.\n //\n // We can directly compare the packed value.\n // If the address is zero, packed will be zero.\n while (packed == 0) {\n packed = _packedOwnerships[--curr];\n }\n return packed;\n }\n }\n }\n revert OwnerQueryForNonexistentToken();\n }\n\n /**\n * @dev Returns the unpacked `TokenOwnership` struct from `packed`.\n */\n function _unpackedOwnership(uint256 packed) private pure returns (TokenOwnership memory ownership) {\n ownership.addr = address(uint160(packed));\n ownership.startTimestamp = uint64(packed >> _BITPOS_START_TIMESTAMP);\n ownership.burned = packed & _BITMASK_BURNED != 0;\n ownership.extraData = uint24(packed >> _BITPOS_EXTRA_DATA);\n }\n\n /**\n * @dev Packs ownership data into a single uint256.\n */\n function _packOwnershipData(address owner, uint256 flags) private view returns (uint256 result) {\n assembly {\n // Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.\n owner := and(owner, _BITMASK_ADDRESS)\n // `owner | (block.timestamp << _BITPOS_START_TIMESTAMP) | flags`.\n result := or(owner, or(shl(_BITPOS_START_TIMESTAMP, timestamp()), flags))\n }\n }\n\n /**\n * @dev Returns the `nextInitialized` flag set if `quantity` equals 1.\n */\n function _nextInitializedFlag(uint256 quantity) private pure returns (uint256 result) {\n // For branchless setting of the `nextInitialized` flag.\n assembly {\n // `(quantity == 1) << _BITPOS_NEXT_INITIALIZED`.\n result := shl(_BITPOS_NEXT_INITIALIZED, eq(quantity, 1))\n }\n }\n\n // =============================================================\n // APPROVAL OPERATIONS\n // =============================================================\n\n /**\n * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n * The approval is cleared when the token is transferred.\n *\n * Only a single account can be approved at a time, so approving the\n * zero address clears previous approvals.\n *\n * Requirements:\n *\n * - The caller must own the token or be an approved operator.\n * - `tokenId` must exist.\n *\n * Emits an {Approval} event.\n */\n function approve(address to, uint256 tokenId) public payable virtual override {\n address owner = ownerOf(tokenId);\n\n if (_msgSenderERC721A() != owner)\n if (!isApprovedForAll(owner, _msgSenderERC721A())) {\n revert ApprovalCallerNotOwnerNorApproved();\n }\n\n _tokenApprovals[tokenId].value = to;\n emit Approval(owner, to, tokenId);\n }\n\n /**\n * @dev Returns the account approved for `tokenId` token.\n *\n * Requirements:\n *\n * - `tokenId` must exist.\n */\n function getApproved(uint256 tokenId) public view virtual override returns (address) {\n if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();\n\n return _tokenApprovals[tokenId].value;\n }\n\n /**\n * @dev Approve or remove `operator` as an operator for the caller.\n * Operators can call {transferFrom} or {safeTransferFrom}\n * for any token owned by the caller.\n *\n * Requirements:\n *\n * - The `operator` cannot be the caller.\n *\n * Emits an {ApprovalForAll} event.\n */\n function setApprovalForAll(address operator, bool approved) public virtual override {\n _operatorApprovals[_msgSenderERC721A()][operator] = approved;\n emit ApprovalForAll(_msgSenderERC721A(), operator, approved);\n }\n\n /**\n * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n *\n * See {setApprovalForAll}.\n */\n function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {\n return _operatorApprovals[owner][operator];\n }\n\n /**\n * @dev Returns whether `tokenId` exists.\n *\n * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.\n *\n * Tokens start existing when they are minted. See {_mint}.\n */\n function _exists(uint256 tokenId) internal view virtual returns (bool) {\n return\n _startTokenId() <= tokenId &&\n tokenId < _currentIndex && // If within bounds,\n _packedOwnerships[tokenId] & _BITMASK_BURNED == 0; // and not burned.\n }\n\n /**\n * @dev Returns whether `msgSender` is equal to `approvedAddress` or `owner`.\n */\n function _isSenderApprovedOrOwner(\n address approvedAddress,\n address owner,\n address msgSender\n ) private pure returns (bool result) {\n assembly {\n // Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.\n owner := and(owner, _BITMASK_ADDRESS)\n // Mask `msgSender` to the lower 160 bits, in case the upper bits somehow aren't clean.\n msgSender := and(msgSender, _BITMASK_ADDRESS)\n // `msgSender == owner || msgSender == approvedAddress`.\n result := or(eq(msgSender, owner), eq(msgSender, approvedAddress))\n }\n }\n\n /**\n * @dev Returns the storage slot and value for the approved address of `tokenId`.\n */\n function _getApprovedSlotAndAddress(uint256 tokenId)\n private\n view\n returns (uint256 approvedAddressSlot, address approvedAddress)\n {\n TokenApprovalRef storage tokenApproval = _tokenApprovals[tokenId];\n // The following is equivalent to `approvedAddress = _tokenApprovals[tokenId].value`.\n assembly {\n approvedAddressSlot := tokenApproval.slot\n approvedAddress := sload(approvedAddressSlot)\n }\n }\n\n // =============================================================\n // TRANSFER OPERATIONS\n // =============================================================\n\n /**\n * @dev Transfers `tokenId` from `from` to `to`.\n *\n * Requirements:\n *\n * - `from` cannot be the zero address.\n * - `to` cannot be the zero address.\n * - `tokenId` token must be owned by `from`.\n * - If the caller is not `from`, it must be approved to move this token\n * by either {approve} or {setApprovalForAll}.\n *\n * Emits a {Transfer} event.\n */\n function transferFrom(\n address from,\n address to,\n uint256 tokenId\n ) public payable virtual override {\n uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);\n\n if (address(uint160(prevOwnershipPacked)) != from) revert TransferFromIncorrectOwner();\n\n (uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);\n\n // The nested ifs save around 20+ gas over a compound boolean condition.\n if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))\n if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();\n\n if (to == address(0)) revert TransferToZeroAddress();\n\n _beforeTokenTransfers(from, to, tokenId, 1);\n\n // Clear approvals from the previous owner.\n assembly {\n if approvedAddress {\n // This is equivalent to `delete _tokenApprovals[tokenId]`.\n sstore(approvedAddressSlot, 0)\n }\n }\n\n // Underflow of the sender's balance is impossible because we check for\n // ownership above and the recipient's balance can't realistically overflow.\n // Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.\n unchecked {\n // We can directly increment and decrement the balances.\n --_packedAddressData[from]; // Updates: `balance -= 1`.\n ++_packedAddressData[to]; // Updates: `balance += 1`.\n\n // Updates:\n // - `address` to the next owner.\n // - `startTimestamp` to the timestamp of transfering.\n // - `burned` to `false`.\n // - `nextInitialized` to `true`.\n _packedOwnerships[tokenId] = _packOwnershipData(\n to,\n _BITMASK_NEXT_INITIALIZED | _nextExtraData(from, to, prevOwnershipPacked)\n );\n\n // If the next slot may not have been initialized (i.e. `nextInitialized == false`) .\n if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {\n uint256 nextTokenId = tokenId + 1;\n // If the next slot's address is zero and not burned (i.e. packed value is zero).\n if (_packedOwnerships[nextTokenId] == 0) {\n // If the next slot is within bounds.\n if (nextTokenId != _currentIndex) {\n // Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.\n _packedOwnerships[nextTokenId] = prevOwnershipPacked;\n }\n }\n }\n }\n\n emit Transfer(from, to, tokenId);\n _afterTokenTransfers(from, to, tokenId, 1);\n }\n\n /**\n * @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.\n */\n function safeTransferFrom(\n address from,\n address to,\n uint256 tokenId\n ) public payable virtual override {\n safeTransferFrom(from, to, tokenId, '');\n }\n\n /**\n * @dev Safely transfers `tokenId` token from `from` to `to`.\n *\n * Requirements:\n *\n * - `from` cannot be the zero address.\n * - `to` cannot be the zero address.\n * - `tokenId` token must exist and be owned by `from`.\n * - If the caller is not `from`, it must be approved to move this token\n * by either {approve} or {setApprovalForAll}.\n * - If `to` refers to a smart contract, it must implement\n * {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n *\n * Emits a {Transfer} event.\n */\n function safeTransferFrom(\n address from,\n address to,\n uint256 tokenId,\n bytes memory _data\n ) public payable virtual override {\n transferFrom(from, to, tokenId);\n if (to.code.length != 0)\n if (!_checkContractOnERC721Received(from, to, tokenId, _data)) {\n revert TransferToNonERC721ReceiverImplementer();\n }\n }\n\n /**\n * @dev Hook that is called before a set of serially-ordered token IDs\n * are about to be transferred. This includes minting.\n * And also called before burning one token.\n *\n * `startTokenId` - the first token ID to be transferred.\n * `quantity` - the amount to be transferred.\n *\n * Calling conditions:\n *\n * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be\n * transferred to `to`.\n * - When `from` is zero, `tokenId` will be minted for `to`.\n * - When `to` is zero, `tokenId` will be burned by `from`.\n * - `from` and `to` are never both zero.\n */\n function _beforeTokenTransfers(\n address from,\n address to,\n uint256 startTokenId,\n uint256 quantity\n ) internal virtual {}\n\n /**\n * @dev Hook that is called after a set of serially-ordered token IDs\n * have been transferred. This includes minting.\n * And also called after one token has been burned.\n *\n * `startTokenId` - the first token ID to be transferred.\n * `quantity` - the amount to be transferred.\n *\n * Calling conditions:\n *\n * - When `from` and `to` are both non-zero, `from`'s `tokenId` has been\n * transferred to `to`.\n * - When `from` is zero, `tokenId` has been minted for `to`.\n * - When `to` is zero, `tokenId` has been burned by `from`.\n * - `from` and `to` are never both zero.\n */\n function _afterTokenTransfers(\n address from,\n address to,\n uint256 startTokenId,\n uint256 quantity\n ) internal virtual {}\n\n /**\n * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target contract.\n *\n * `from` - Previous owner of the given token ID.\n * `to` - Target address that will receive the token.\n * `tokenId` - Token ID to be transferred.\n * `_data` - Optional data to send along with the call.\n *\n * Returns whether the call correctly returned the expected magic value.\n */\n function _checkContractOnERC721Received(\n address from,\n address to,\n uint256 tokenId,\n bytes memory _data\n ) private returns (bool) {\n try ERC721A__IERC721Receiver(to).onERC721Received(_msgSenderERC721A(), from, tokenId, _data) returns (\n bytes4 retval\n ) {\n return retval == ERC721A__IERC721Receiver(to).onERC721Received.selector;\n } catch (bytes memory reason) {\n if (reason.length == 0) {\n revert TransferToNonERC721ReceiverImplementer();\n } else {\n assembly {\n revert(add(32, reason), mload(reason))\n }\n }\n }\n }\n\n // =============================================================\n // MINT OPERATIONS\n // =============================================================\n\n /**\n * @dev Mints `quantity` tokens and transfers them to `to`.\n *\n * Requirements:\n *\n * - `to` cannot be the zero address.\n * - `quantity` must be greater than 0.\n *\n * Emits a {Transfer} event for each mint.\n */\n function _mint(address to, uint256 quantity) internal virtual {\n uint256 startTokenId = _currentIndex;\n if (quantity == 0) revert MintZeroQuantity();\n\n _beforeTokenTransfers(address(0), to, startTokenId, quantity);\n\n // Overflows are incredibly unrealistic.\n // `balance` and `numberMinted` have a maximum limit of 2**64.\n // `tokenId` has a maximum limit of 2**256.\n unchecked {\n // Updates:\n // - `balance += quantity`.\n // - `numberMinted += quantity`.\n //\n // We can directly add to the `balance` and `numberMinted`.\n _packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);\n\n // Updates:\n // - `address` to the owner.\n // - `startTimestamp` to the timestamp of minting.\n // - `burned` to `false`.\n // - `nextInitialized` to `quantity == 1`.\n _packedOwnerships[startTokenId] = _packOwnershipData(\n to,\n _nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)\n );\n\n uint256 toMasked;\n uint256 end = startTokenId + quantity;\n\n // Use assembly to loop and emit the `Transfer` event for gas savings.\n // The duplicated `log4` removes an extra check and reduces stack juggling.\n // The assembly, together with the surrounding Solidity code, have been\n // delicately arranged to nudge the compiler into producing optimized opcodes.\n assembly {\n // Mask `to` to the lower 160 bits, in case the upper bits somehow aren't clean.\n toMasked := and(to, _BITMASK_ADDRESS)\n // Emit the `Transfer` event.\n log4(\n 0, // Start of data (0, since no data).\n 0, // End of data (0, since no data).\n _TRANSFER_EVENT_SIGNATURE, // Signature.\n 0, // `address(0)`.\n toMasked, // `to`.\n startTokenId // `tokenId`.\n )\n\n // The `iszero(eq(,))` check ensures that large values of `quantity`\n // that overflows uint256 will make the loop run out of gas.\n // The compiler will optimize the `iszero` away for performance.\n for {\n let tokenId := add(startTokenId, 1)\n } iszero(eq(tokenId, end)) {\n tokenId := add(tokenId, 1)\n } {\n // Emit the `Transfer` event. Similar to above.\n log4(0, 0, _TRANSFER_EVENT_SIGNATURE, 0, toMasked, tokenId)\n }\n }\n if (toMasked == 0) revert MintToZeroAddress();\n\n _currentIndex = end;\n }\n _afterTokenTransfers(address(0), to, startTokenId, quantity);\n }\n\n /**\n * @dev Mints `quantity` tokens and transfers them to `to`.\n *\n * This function is intended for efficient minting only during contract creation.\n *\n * It emits only one {ConsecutiveTransfer} as defined in\n * [ERC2309](https://eips.ethereum.org/EIPS/eip-2309),\n * instead of a sequence of {Transfer} event(s).\n *\n * Calling this function outside of contract creation WILL make your contract\n * non-compliant with the ERC721 standard.\n * For full ERC721 compliance, substituting ERC721 {Transfer} event(s) with the ERC2309\n * {ConsecutiveTransfer} event is only permissible during contract creation.\n *\n * Requirements:\n *\n * - `to` cannot be the zero address.\n * - `quantity` must be greater than 0.\n *\n * Emits a {ConsecutiveTransfer} event.\n */\n function _mintERC2309(address to, uint256 quantity) internal virtual {\n uint256 startTokenId = _currentIndex;\n if (to == address(0)) revert MintToZeroAddress();\n if (quantity == 0) revert MintZeroQuantity();\n if (quantity > _MAX_MINT_ERC2309_QUANTITY_LIMIT) revert MintERC2309QuantityExceedsLimit();\n\n _beforeTokenTransfers(address(0), to, startTokenId, quantity);\n\n // Overflows are unrealistic due to the above check for `quantity` to be below the limit.\n unchecked {\n // Updates:\n // - `balance += quantity`.\n // - `numberMinted += quantity`.\n //\n // We can directly add to the `balance` and `numberMinted`.\n _packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);\n\n // Updates:\n // - `address` to the owner.\n // - `startTimestamp` to the timestamp of minting.\n // - `burned` to `false`.\n // - `nextInitialized` to `quantity == 1`.\n _packedOwnerships[startTokenId] = _packOwnershipData(\n to,\n _nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)\n );\n\n emit ConsecutiveTransfer(startTokenId, startTokenId + quantity - 1, address(0), to);\n\n _currentIndex = startTokenId + quantity;\n }\n _afterTokenTransfers(address(0), to, startTokenId, quantity);\n }\n\n /**\n * @dev Safely mints `quantity` tokens and transfers them to `to`.\n *\n * Requirements:\n *\n * - If `to` refers to a smart contract, it must implement\n * {IERC721Receiver-onERC721Received}, which is called for each safe transfer.\n * - `quantity` must be greater than 0.\n *\n * See {_mint}.\n *\n * Emits a {Transfer} event for each mint.\n */\n function _safeMint(\n address to,\n uint256 quantity,\n bytes memory _data\n ) internal virtual {\n _mint(to, quantity);\n\n unchecked {\n if (to.code.length != 0) {\n uint256 end = _currentIndex;\n uint256 index = end - quantity;\n do {\n if (!_checkContractOnERC721Received(address(0), to, index++, _data)) {\n revert TransferToNonERC721ReceiverImplementer();\n }\n } while (index < end);\n // Reentrancy protection.\n if (_currentIndex != end) revert();\n }\n }\n }\n\n /**\n * @dev Equivalent to `_safeMint(to, quantity, '')`.\n */\n function _safeMint(address to, uint256 quantity) internal virtual {\n _safeMint(to, quantity, '');\n }\n\n // =============================================================\n // BURN OPERATIONS\n // =============================================================\n\n /**\n * @dev Equivalent to `_burn(tokenId, false)`.\n */\n function _burn(uint256 tokenId) internal virtual {\n _burn(tokenId, false);\n }\n\n /**\n * @dev Destroys `tokenId`.\n * The approval is cleared when the token is burned.\n *\n * Requirements:\n *\n * - `tokenId` must exist.\n *\n * Emits a {Transfer} event.\n */\n function _burn(uint256 tokenId, bool approvalCheck) internal virtual {\n uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);\n\n address from = address(uint160(prevOwnershipPacked));\n\n (uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);\n\n if (approvalCheck) {\n // The nested ifs save around 20+ gas over a compound boolean condition.\n if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))\n if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();\n }\n\n _beforeTokenTransfers(from, address(0), tokenId, 1);\n\n // Clear approvals from the previous owner.\n assembly {\n if approvedAddress {\n // This is equivalent to `delete _tokenApprovals[tokenId]`.\n sstore(approvedAddressSlot, 0)\n }\n }\n\n // Underflow of the sender's balance is impossible because we check for\n // ownership above and the recipient's balance can't realistically overflow.\n // Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.\n unchecked {\n // Updates:\n // - `balance -= 1`.\n // - `numberBurned += 1`.\n //\n // We can directly decrement the balance, and increment the number burned.\n // This is equivalent to `packed -= 1; packed += 1 << _BITPOS_NUMBER_BURNED;`.\n _packedAddressData[from] += (1 << _BITPOS_NUMBER_BURNED) - 1;\n\n // Updates:\n // - `address` to the last owner.\n // - `startTimestamp` to the timestamp of burning.\n // - `burned` to `true`.\n // - `nextInitialized` to `true`.\n _packedOwnerships[tokenId] = _packOwnershipData(\n from,\n (_BITMASK_BURNED | _BITMASK_NEXT_INITIALIZED) | _nextExtraData(from, address(0), prevOwnershipPacked)\n );\n\n // If the next slot may not have been initialized (i.e. `nextInitialized == false`) .\n if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {\n uint256 nextTokenId = tokenId + 1;\n // If the next slot's address is zero and not burned (i.e. packed value is zero).\n if (_packedOwnerships[nextTokenId] == 0) {\n // If the next slot is within bounds.\n if (nextTokenId != _currentIndex) {\n // Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.\n _packedOwnerships[nextTokenId] = prevOwnershipPacked;\n }\n }\n }\n }\n\n emit Transfer(from, address(0), tokenId);\n _afterTokenTransfers(from, address(0), tokenId, 1);\n\n // Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.\n unchecked {\n _burnCounter++;\n }\n }\n\n // =============================================================\n // EXTRA DATA OPERATIONS\n // =============================================================\n\n /**\n * @dev Directly sets the extra data for the ownership data `index`.\n */\n function _setExtraDataAt(uint256 index, uint24 extraData) internal virtual {\n uint256 packed = _packedOwnerships[index];\n if (packed == 0) revert OwnershipNotInitializedForExtraData();\n uint256 extraDataCasted;\n // Cast `extraData` with assembly to avoid redundant masking.\n assembly {\n extraDataCasted := extraData\n }\n packed = (packed & _BITMASK_EXTRA_DATA_COMPLEMENT) | (extraDataCasted << _BITPOS_EXTRA_DATA);\n _packedOwnerships[index] = packed;\n }\n\n /**\n * @dev Called during each token transfer to set the 24bit `extraData` field.\n * Intended to be overridden by the cosumer contract.\n *\n * `previousExtraData` - the value of `extraData` before transfer.\n *\n * Calling conditions:\n *\n * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be\n * transferred to `to`.\n * - When `from` is zero, `tokenId` will be minted for `to`.\n * - When `to` is zero, `tokenId` will be burned by `from`.\n * - `from` and `to` are never both zero.\n */\n function _extraData(\n address from,\n address to,\n uint24 previousExtraData\n ) internal view virtual returns (uint24) {}\n\n /**\n * @dev Returns the next extra data for the packed ownership data.\n * The returned result is shifted into position.\n */\n function _nextExtraData(\n address from,\n address to,\n uint256 prevOwnershipPacked\n ) private view returns (uint256) {\n uint24 extraData = uint24(prevOwnershipPacked >> _BITPOS_EXTRA_DATA);\n return uint256(_extraData(from, to, extraData)) << _BITPOS_EXTRA_DATA;\n }\n\n // =============================================================\n // OTHER OPERATIONS\n // =============================================================\n\n /**\n * @dev Returns the message sender (defaults to `msg.sender`).\n *\n * If you are writing GSN compatible contracts, you need to override this function.\n */\n function _msgSenderERC721A() internal view virtual returns (address) {\n return msg.sender;\n }\n\n /**\n * @dev Converts a uint256 to its ASCII string decimal representation.\n */\n function _toString(uint256 value) internal pure virtual returns (string memory str) {\n assembly {\n // The maximum value of a uint256 contains 78 digits (1 byte per digit), but\n // we allocate 0xa0 bytes to keep the free memory pointer 32-byte word aligned.\n // We will need 1 word for the trailing zeros padding, 1 word for the length,\n // and 3 words for a maximum of 78 digits. Total: 5 * 0x20 = 0xa0.\n let m := add(mload(0x40), 0xa0)\n // Update the free memory pointer to allocate.\n mstore(0x40, m)\n // Assign the `str` to the end.\n str := sub(m, 0x20)\n // Zeroize the slot after the string.\n mstore(str, 0)\n\n // Cache the end of the memory to calculate the length later.\n let end := str\n\n // We write the string from rightmost digit to leftmost digit.\n // The following is essentially a do-while loop that also handles the zero case.\n // prettier-ignore\n for { let temp := value } 1 {} {\n str := sub(str, 1)\n // Write the character to the pointer.\n // The ASCII index of the '0' character is 48.\n mstore8(str, add(48, mod(temp, 10)))\n // Keep dividing `temp` until zero.\n temp := div(temp, 10)\n // prettier-ignore\n if iszero(temp) { break }\n }\n\n let length := sub(end, str)\n // Move the pointer 32 bytes leftwards to make room for the length.\n str := sub(str, 0x20)\n // Store the length.\n mstore(str, length)\n }\n }\n}\n"
},
"lib/erc721a/contracts/IERC721A.sol": {
"content": "// SPDX-License-Identifier: MIT\n// ERC721A Contracts v4.2.3\n// Creator: Chiru Labs\n\npragma solidity ^0.8.4;\n\n/**\n * @dev Interface of ERC721A.\n */\ninterface IERC721A {\n /**\n * The caller must own the token or be an approved operator.\n */\n error ApprovalCallerNotOwnerNorApproved();\n\n /**\n * The token does not exist.\n */\n error ApprovalQueryForNonexistentToken();\n\n /**\n * Cannot query the balance for the zero address.\n */\n error BalanceQueryForZeroAddress();\n\n /**\n * Cannot mint to the zero address.\n */\n error MintToZeroAddress();\n\n /**\n * The quantity of tokens minted must be more than zero.\n */\n error MintZeroQuantity();\n\n /**\n * The token does not exist.\n */\n error OwnerQueryForNonexistentToken();\n\n /**\n * The caller must own the token or be an approved operator.\n */\n error TransferCallerNotOwnerNorApproved();\n\n /**\n * The token must be owned by `from`.\n */\n error TransferFromIncorrectOwner();\n\n /**\n * Cannot safely transfer to a contract that does not implement the\n * ERC721Receiver interface.\n */\n error TransferToNonERC721ReceiverImplementer();\n\n /**\n * Cannot transfer to the zero address.\n */\n error TransferToZeroAddress();\n\n /**\n * The token does not exist.\n */\n error URIQueryForNonexistentToken();\n\n /**\n * The `quantity` minted with ERC2309 exceeds the safety limit.\n */\n error MintERC2309QuantityExceedsLimit();\n\n /**\n * The `extraData` cannot be set on an unintialized ownership slot.\n */\n error OwnershipNotInitializedForExtraData();\n\n // =============================================================\n // STRUCTS\n // =============================================================\n\n struct TokenOwnership {\n // The address of the owner.\n address addr;\n // Stores the start time of ownership with minimal overhead for tokenomics.\n uint64 startTimestamp;\n // Whether the token has been burned.\n bool burned;\n // Arbitrary data similar to `startTimestamp` that can be set via {_extraData}.\n uint24 extraData;\n }\n\n // =============================================================\n // TOKEN COUNTERS\n // =============================================================\n\n /**\n * @dev Returns the total number of tokens in existence.\n * Burned tokens will reduce the count.\n * To get the total number of tokens minted, please see {_totalMinted}.\n */\n function totalSupply() external view returns (uint256);\n\n // =============================================================\n // IERC165\n // =============================================================\n\n /**\n * @dev Returns true if this contract implements the interface defined by\n * `interfaceId`. See the corresponding\n * [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)\n * to learn more about how these ids are created.\n *\n * This function call must use less than 30000 gas.\n */\n function supportsInterface(bytes4 interfaceId) external view returns (bool);\n\n // =============================================================\n // IERC721\n // =============================================================\n\n /**\n * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n */\n event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n /**\n * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n */\n event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n /**\n * @dev Emitted when `owner` enables or disables\n * (`approved`) `operator` to manage all of its assets.\n */\n event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n /**\n * @dev Returns the number of tokens in `owner`'s account.\n */\n function balanceOf(address owner) external view returns (uint256 balance);\n\n /**\n * @dev Returns the owner of the `tokenId` token.\n *\n * Requirements:\n *\n * - `tokenId` must exist.\n */\n function ownerOf(uint256 tokenId) external view returns (address owner);\n\n /**\n * @dev Safely transfers `tokenId` token from `from` to `to`,\n * checking first that contract recipients are aware of the ERC721 protocol\n * to prevent tokens from being forever locked.\n *\n * Requirements:\n *\n * - `from` cannot be the zero address.\n * - `to` cannot be the zero address.\n * - `tokenId` token must exist and be owned by `from`.\n * - If the caller is not `from`, it must be have been allowed to move\n * this token by either {approve} or {setApprovalForAll}.\n * - If `to` refers to a smart contract, it must implement\n * {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n *\n * Emits a {Transfer} event.\n */\n function safeTransferFrom(\n address from,\n address to,\n uint256 tokenId,\n bytes calldata data\n ) external payable;\n\n /**\n * @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.\n */\n function safeTransferFrom(\n address from,\n address to,\n uint256 tokenId\n ) external payable;\n\n /**\n * @dev Transfers `tokenId` from `from` to `to`.\n *\n * WARNING: Usage of this method is discouraged, use {safeTransferFrom}\n * whenever possible.\n *\n * Requirements:\n *\n * - `from` cannot be the zero address.\n * - `to` cannot be the zero address.\n * - `tokenId` token must be owned by `from`.\n * - If the caller is not `from`, it must be approved to move this token\n * by either {approve} or {setApprovalForAll}.\n *\n * Emits a {Transfer} event.\n */\n function transferFrom(\n address from,\n address to,\n uint256 tokenId\n ) external payable;\n\n /**\n * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n * The approval is cleared when the token is transferred.\n *\n * Only a single account can be approved at a time, so approving the\n * zero address clears previous approvals.\n *\n * Requirements:\n *\n * - The caller must own the token or be an approved operator.\n * - `tokenId` must exist.\n *\n * Emits an {Approval} event.\n */\n function approve(address to, uint256 tokenId) external payable;\n\n /**\n * @dev Approve or remove `operator` as an operator for the caller.\n * Operators can call {transferFrom} or {safeTransferFrom}\n * for any token owned by the caller.\n *\n * Requirements:\n *\n * - The `operator` cannot be the caller.\n *\n * Emits an {ApprovalForAll} event.\n */\n function setApprovalForAll(address operator, bool _approved) external;\n\n /**\n * @dev Returns the account approved for `tokenId` token.\n *\n * Requirements:\n *\n * - `tokenId` must exist.\n */\n function getApproved(uint256 tokenId) external view returns (address operator);\n\n /**\n * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n *\n * See {setApprovalForAll}.\n */\n function isApprovedForAll(address owner, address operator) external view returns (bool);\n\n // =============================================================\n // IERC721Metadata\n // =============================================================\n\n /**\n * @dev Returns the token collection name.\n */\n function name() external view returns (string memory);\n\n /**\n * @dev Returns the token collection symbol.\n */\n function symbol() external view returns (string memory);\n\n /**\n * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n */\n function tokenURI(uint256 tokenId) external view returns (string memory);\n\n // =============================================================\n // IERC2309\n // =============================================================\n\n /**\n * @dev Emitted when tokens in `fromTokenId` to `toTokenId`\n * (inclusive) is transferred from `from` to `to`, as defined in the\n * [ERC2309](https://eips.ethereum.org/EIPS/eip-2309) standard.\n *\n * See {_mintERC2309} for more details.\n */\n event ConsecutiveTransfer(uint256 indexed fromTokenId, uint256 toTokenId, address indexed from, address indexed to);\n}\n"
},
"lib/erc721a/contracts/extensions/ERC721AQueryable.sol": {
"content": "// SPDX-License-Identifier: MIT\n// ERC721A Contracts v4.2.3\n// Creator: Chiru Labs\n\npragma solidity ^0.8.4;\n\nimport './IERC721AQueryable.sol';\nimport '../ERC721A.sol';\n\n/**\n * @title ERC721AQueryable.\n *\n * @dev ERC721A subclass with convenience query functions.\n */\nabstract contract ERC721AQueryable is ERC721A, IERC721AQueryable {\n /**\n * @dev Returns the `TokenOwnership` struct at `tokenId` without reverting.\n *\n * If the `tokenId` is out of bounds:\n *\n * - `addr = address(0)`\n * - `startTimestamp = 0`\n * - `burned = false`\n * - `extraData = 0`\n *\n * If the `tokenId` is burned:\n *\n * - `addr = <Address of owner before token was burned>`\n * - `startTimestamp = <Timestamp when token was burned>`\n * - `burned = true`\n * - `extraData = <Extra data when token was burned>`\n *\n * Otherwise:\n *\n * - `addr = <Address of owner>`\n * - `startTimestamp = <Timestamp of start of ownership>`\n * - `burned = false`\n * - `extraData = <Extra data at start of ownership>`\n */\n function explicitOwnershipOf(uint256 tokenId) public view virtual override returns (TokenOwnership memory) {\n TokenOwnership memory ownership;\n if (tokenId < _startTokenId() || tokenId >= _nextTokenId()) {\n return ownership;\n }\n ownership = _ownershipAt(tokenId);\n if (ownership.burned) {\n return ownership;\n }\n return _ownershipOf(tokenId);\n }\n\n /**\n * @dev Returns an array of `TokenOwnership` structs at `tokenIds` in order.\n * See {ERC721AQueryable-explicitOwnershipOf}\n */\n function explicitOwnershipsOf(uint256[] calldata tokenIds)\n external\n view\n virtual\n override\n returns (TokenOwnership[] memory)\n {\n unchecked {\n uint256 tokenIdsLength = tokenIds.length;\n TokenOwnership[] memory ownerships = new TokenOwnership[](tokenIdsLength);\n for (uint256 i; i != tokenIdsLength; ++i) {\n ownerships[i] = explicitOwnershipOf(tokenIds[i]);\n }\n return ownerships;\n }\n }\n\n /**\n * @dev Returns an array of token IDs owned by `owner`,\n * in the range [`start`, `stop`)\n * (i.e. `start <= tokenId < stop`).\n *\n * This function allows for tokens to be queried if the collection\n * grows too big for a single call of {ERC721AQueryable-tokensOfOwner}.\n *\n * Requirements:\n *\n * - `start < stop`\n */\n function tokensOfOwnerIn(\n address owner,\n uint256 start,\n uint256 stop\n ) external view virtual override returns (uint256[] memory) {\n unchecked {\n if (start >= stop) revert InvalidQueryRange();\n uint256 tokenIdsIdx;\n uint256 stopLimit = _nextTokenId();\n // Set `start = max(start, _startTokenId())`.\n if (start < _startTokenId()) {\n start = _startTokenId();\n }\n // Set `stop = min(stop, stopLimit)`.\n if (stop > stopLimit) {\n stop = stopLimit;\n }\n uint256 tokenIdsMaxLength = balanceOf(owner);\n // Set `tokenIdsMaxLength = min(balanceOf(owner), stop - start)`,\n // to cater for cases where `balanceOf(owner)` is too big.\n if (start < stop) {\n uint256 rangeLength = stop - start;\n if (rangeLength < tokenIdsMaxLength) {\n tokenIdsMaxLength = rangeLength;\n }\n } else {\n tokenIdsMaxLength = 0;\n }\n uint256[] memory tokenIds = new uint256[](tokenIdsMaxLength);\n if (tokenIdsMaxLength == 0) {\n return tokenIds;\n }\n // We need to call `explicitOwnershipOf(start)`,\n // because the slot at `start` may not be initialized.\n TokenOwnership memory ownership = explicitOwnershipOf(start);\n address currOwnershipAddr;\n // If the starting slot exists (i.e. not burned), initialize `currOwnershipAddr`.\n // `ownership.address` will not be zero, as `start` is clamped to the valid token ID range.\n if (!ownership.burned) {\n currOwnershipAddr = ownership.addr;\n }\n for (uint256 i = start; i != stop && tokenIdsIdx != tokenIdsMaxLength; ++i) {\n ownership = _ownershipAt(i);\n if (ownership.burned) {\n continue;\n }\n if (ownership.addr != address(0)) {\n currOwnershipAddr = ownership.addr;\n }\n if (currOwnershipAddr == owner) {\n tokenIds[tokenIdsIdx++] = i;\n }\n }\n // Downsize the array to fit.\n assembly {\n mstore(tokenIds, tokenIdsIdx)\n }\n return tokenIds;\n }\n }\n\n /**\n * @dev Returns an array of token IDs owned by `owner`.\n *\n * This function scans the ownership mapping and is O(`totalSupply`) in complexity.\n * It is meant to be called off-chain.\n *\n * See {ERC721AQueryable-tokensOfOwnerIn} for splitting the scan into\n * multiple smaller scans if the collection is large enough to cause\n * an out-of-gas error (10K collections should be fine).\n */\n function tokensOfOwner(address owner) external view virtual override returns (uint256[] memory) {\n unchecked {\n uint256 tokenIdsIdx;\n address currOwnershipAddr;\n uint256 tokenIdsLength = balanceOf(owner);\n uint256[] memory tokenIds = new uint256[](tokenIdsLength);\n TokenOwnership memory ownership;\n for (uint256 i = _startTokenId(); tokenIdsIdx != tokenIdsLength; ++i) {\n ownership = _ownershipAt(i);\n if (ownership.burned) {\n continue;\n }\n if (ownership.addr != address(0)) {\n currOwnershipAddr = ownership.addr;\n }\n if (currOwnershipAddr == owner) {\n tokenIds[tokenIdsIdx++] = i;\n }\n }\n return tokenIds;\n }\n }\n}\n"
},
"lib/erc721a/contracts/extensions/IERC721AQueryable.sol": {
"content": "// SPDX-License-Identifier: MIT\n// ERC721A Contracts v4.2.3\n// Creator: Chiru Labs\n\npragma solidity ^0.8.4;\n\nimport '../IERC721A.sol';\n\n/**\n * @dev Interface of ERC721AQueryable.\n */\ninterface IERC721AQueryable is IERC721A {\n /**\n * Invalid query range (`start` >= `stop`).\n */\n error InvalidQueryRange();\n\n /**\n * @dev Returns the `TokenOwnership` struct at `tokenId` without reverting.\n *\n * If the `tokenId` is out of bounds:\n *\n * - `addr = address(0)`\n * - `startTimestamp = 0`\n * - `burned = false`\n * - `extraData = 0`\n *\n * If the `tokenId` is burned:\n *\n * - `addr = <Address of owner before token was burned>`\n * - `startTimestamp = <Timestamp when token was burned>`\n * - `burned = true`\n * - `extraData = <Extra data when token was burned>`\n *\n * Otherwise:\n *\n * - `addr = <Address of owner>`\n * - `startTimestamp = <Timestamp of start of ownership>`\n * - `burned = false`\n * - `extraData = <Extra data at start of ownership>`\n */\n function explicitOwnershipOf(uint256 tokenId) external view returns (TokenOwnership memory);\n\n /**\n * @dev Returns an array of `TokenOwnership` structs at `tokenIds` in order.\n * See {ERC721AQueryable-explicitOwnershipOf}\n */\n function explicitOwnershipsOf(uint256[] memory tokenIds) external view returns (TokenOwnership[] memory);\n\n /**\n * @dev Returns an array of token IDs owned by `owner`,\n * in the range [`start`, `stop`)\n * (i.e. `start <= tokenId < stop`).\n *\n * This function allows for tokens to be queried if the collection\n * grows too big for a single call of {ERC721AQueryable-tokensOfOwner}.\n *\n * Requirements:\n *\n * - `start < stop`\n */\n function tokensOfOwnerIn(\n address owner,\n uint256 start,\n uint256 stop\n ) external view returns (uint256[] memory);\n\n /**\n * @dev Returns an array of token IDs owned by `owner`.\n *\n * This function scans the ownership mapping and is O(`totalSupply`) in complexity.\n * It is meant to be called off-chain.\n *\n * See {ERC721AQueryable-tokensOfOwnerIn} for splitting the scan into\n * multiple smaller scans if the collection is large enough to cause\n * an out-of-gas error (10K collections should be fine).\n */\n function tokensOfOwner(address owner) external view returns (uint256[] memory);\n}\n"
},
"lib/openzeppelin-contracts/contracts/access/Ownable.sol": {
"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../utils/Context.sol\";\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * By default, the owner account will be the one that deploys the contract. This\n * can later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n address private _owner;\n\n event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n /**\n * @dev Initializes the contract setting the deployer as the initial owner.\n */\n constructor() {\n _transferOwnership(_msgSender());\n }\n\n /**\n * @dev Throws if called by any account other than the owner.\n */\n modifier onlyOwner() {\n _checkOwner();\n _;\n }\n\n /**\n * @dev Returns the address of the current owner.\n */\n function owner() public view virtual returns (address) {\n return _owner;\n }\n\n /**\n * @dev Throws if the sender is not the owner.\n */\n function _checkOwner() internal view virtual {\n require(owner() == _msgSender(), \"Ownable: caller is not the owner\");\n }\n\n /**\n * @dev Leaves the contract without owner. It will not be possible to call\n * `onlyOwner` functions anymore. Can only be called by the current owner.\n *\n * NOTE: Renouncing ownership will leave the contract without an owner,\n * thereby removing any functionality that is only available to the owner.\n */\n function renounceOwnership() public virtual onlyOwner {\n _transferOwnership(address(0));\n }\n\n /**\n * @dev Transfers ownership of the contract to a new account (`newOwner`).\n * Can only be called by the current owner.\n */\n function transferOwnership(address newOwner) public virtual onlyOwner {\n require(newOwner != address(0), \"Ownable: new owner is the zero address\");\n _transferOwnership(newOwner);\n }\n\n /**\n * @dev Transfers ownership of the contract to a new account (`newOwner`).\n * Internal function without access restriction.\n */\n function _transferOwnership(address newOwner) internal virtual {\n address oldOwner = _owner;\n _owner = newOwner;\n emit OwnershipTransferred(oldOwner, newOwner);\n }\n}\n"
},
"lib/openzeppelin-contracts/contracts/security/Pausable.sol": {
"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (security/Pausable.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../utils/Context.sol\";\n\n/**\n * @dev Contract module which allows children to implement an emergency stop\n * mechanism that can be triggered by an authorized account.\n *\n * This module is used through inheritance. It will make available the\n * modifiers `whenNotPaused` and `whenPaused`, which can be applied to\n * the functions of your contract. Note that they will not be pausable by\n * simply including this module, only once the modifiers are put in place.\n */\nabstract contract Pausable is Context {\n /**\n * @dev Emitted when the pause is triggered by `account`.\n */\n event Paused(address account);\n\n /**\n * @dev Emitted when the pause is lifted by `account`.\n */\n event Unpaused(address account);\n\n bool private _paused;\n\n /**\n * @dev Initializes the contract in unpaused state.\n */\n constructor() {\n _paused = false;\n }\n\n /**\n * @dev Modifier to make a function callable only when the contract is not paused.\n *\n * Requirements:\n *\n * - The contract must not be paused.\n */\n modifier whenNotPaused() {\n _requireNotPaused();\n _;\n }\n\n /**\n * @dev Modifier to make a function callable only when the contract is paused.\n *\n * Requirements:\n *\n * - The contract must be paused.\n */\n modifier whenPaused() {\n _requirePaused();\n _;\n }\n\n /**\n * @dev Returns true if the contract is paused, and false otherwise.\n */\n function paused() public view virtual returns (bool) {\n return _paused;\n }\n\n /**\n * @dev Throws if the contract is paused.\n */\n function _requireNotPaused() internal view virtual {\n require(!paused(), \"Pausable: paused\");\n }\n\n /**\n * @dev Throws if the contract is not paused.\n */\n function _requirePaused() internal view virtual {\n require(paused(), \"Pausable: not paused\");\n }\n\n /**\n * @dev Triggers stopped state.\n *\n * Requirements:\n *\n * - The contract must not be paused.\n */\n function _pause() internal virtual whenNotPaused {\n _paused = true;\n emit Paused(_msgSender());\n }\n\n /**\n * @dev Returns to normal state.\n *\n * Requirements:\n *\n * - The contract must be paused.\n */\n function _unpause() internal virtual whenPaused {\n _paused = false;\n emit Unpaused(_msgSender());\n }\n}\n"
},
"lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol": {
"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC20 standard as defined in the EIP.\n */\ninterface IERC20 {\n /**\n * @dev Emitted when `value` tokens are moved from one account (`from`) to\n * another (`to`).\n *\n * Note that `value` may be zero.\n */\n event Transfer(address indexed from, address indexed to, uint256 value);\n\n /**\n * @dev Emitted when the allowance of a `spender` for an `owner` is set by\n * a call to {approve}. `value` is the new allowance.\n */\n event Approval(address indexed owner, address indexed spender, uint256 value);\n\n /**\n * @dev Returns the amount of tokens in existence.\n */\n function totalSupply() external view returns (uint256);\n\n /**\n * @dev Returns the amount of tokens owned by `account`.\n */\n function balanceOf(address account) external view returns (uint256);\n\n /**\n * @dev Moves `amount` tokens from the caller's account to `to`.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * Emits a {Transfer} event.\n */\n function transfer(address to, uint256 amount) external returns (bool);\n\n /**\n * @dev Returns the remaining number of tokens that `spender` will be\n * allowed to spend on behalf of `owner` through {transferFrom}. This is\n * zero by default.\n *\n * This value changes when {approve} or {transferFrom} are called.\n */\n function allowance(address owner, address spender) external view returns (uint256);\n\n /**\n * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * IMPORTANT: Beware that changing an allowance with this method brings the risk\n * that someone may use both the old and the new allowance by unfortunate\n * transaction ordering. One possible solution to mitigate this race\n * condition is to first reduce the spender's allowance to 0 and set the\n * desired value afterwards:\n * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n *\n * Emits an {Approval} event.\n */\n function approve(address spender, uint256 amount) external returns (bool);\n\n /**\n * @dev Moves `amount` tokens from `from` to `to` using the\n * allowance mechanism. `amount` is then deducted from the caller's\n * allowance.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * Emits a {Transfer} event.\n */\n function transferFrom(\n address from,\n address to,\n uint256 amount\n ) external returns (bool);\n}\n"
},
"lib/openzeppelin-contracts/contracts/utils/Address.sol": {
"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)\n\npragma solidity ^0.8.1;\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary Address {\n /**\n * @dev Returns true if `account` is a contract.\n *\n * [IMPORTANT]\n * ====\n * It is unsafe to assume that an address for which this function returns\n * false is an externally-owned account (EOA) and not a contract.\n *\n * Among others, `isContract` will return false for the following\n * types of addresses:\n *\n * - an externally-owned account\n * - a contract in construction\n * - an address where a contract will be created\n * - an address where a contract lived, but was destroyed\n * ====\n *\n * [IMPORTANT]\n * ====\n * You shouldn't rely on `isContract` to protect against flash loan attacks!\n *\n * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets\n * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract\n * constructor.\n * ====\n */\n function isContract(address account) internal view returns (bool) {\n // This method relies on extcodesize/address.code.length, which returns 0\n // for contracts in construction, since the code is only stored at the end\n // of the constructor execution.\n\n return account.code.length > 0;\n }\n\n /**\n * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n * `recipient`, forwarding all available gas and reverting on errors.\n *\n * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n * of certain opcodes, possibly making contracts go over the 2300 gas limit\n * imposed by `transfer`, making them unable to receive funds via\n * `transfer`. {sendValue} removes this limitation.\n *\n * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n *\n * IMPORTANT: because control is transferred to `recipient`, care must be\n * taken to not create reentrancy vulnerabilities. Consider using\n * {ReentrancyGuard} or the\n * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n */\n function sendValue(address payable recipient, uint256 amount) internal {\n require(address(this).balance >= amount, \"Address: insufficient balance\");\n\n (bool success, ) = recipient.call{value: amount}(\"\");\n require(success, \"Address: unable to send value, recipient may have reverted\");\n }\n\n /**\n * @dev Performs a Solidity function call using a low level `call`. A\n * plain `call` is an unsafe replacement for a function call: use this\n * function instead.\n *\n * If `target` reverts with a revert reason, it is bubbled up by this\n * function (like regular Solidity function calls).\n *\n * Returns the raw returned data. To convert to the expected return value,\n * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n *\n * Requirements:\n *\n * - `target` must be a contract.\n * - calling `target` with `data` must not revert.\n *\n * _Available since v3.1._\n */\n function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n return functionCallWithValue(target, data, 0, \"Address: low-level call failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with\n * `errorMessage` as a fallback revert reason when `target` reverts.\n *\n * _Available since v3.1._\n */\n function functionCall(\n address target,\n bytes memory data,\n string memory errorMessage\n ) internal returns (bytes memory) {\n return functionCallWithValue(target, data, 0, errorMessage);\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but also transferring `value` wei to `target`.\n *\n * Requirements:\n *\n * - the calling contract must have an ETH balance of at least `value`.\n * - the called Solidity function must be `payable`.\n *\n * _Available since v3.1._\n */\n function functionCallWithValue(\n address target,\n bytes memory data,\n uint256 value\n ) internal returns (bytes memory) {\n return functionCallWithValue(target, data, value, \"Address: low-level call with value failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but\n * with `errorMessage` as a fallback revert reason when `target` reverts.\n *\n * _Available since v3.1._\n */\n function functionCallWithValue(\n address target,\n bytes memory data,\n uint256 value,\n string memory errorMessage\n ) internal returns (bytes memory) {\n require(address(this).balance >= value, \"Address: insufficient balance for call\");\n (bool success, bytes memory returndata) = target.call{value: value}(data);\n return verifyCallResultFromTarget(target, success, returndata, errorMessage);\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but performing a static call.\n *\n * _Available since v3.3._\n */\n function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n return functionStaticCall(target, data, \"Address: low-level static call failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n * but performing a static call.\n *\n * _Available since v3.3._\n */\n function functionStaticCall(\n address target,\n bytes memory data,\n string memory errorMessage\n ) internal view returns (bytes memory) {\n (bool success, bytes memory returndata) = target.staticcall(data);\n return verifyCallResultFromTarget(target, success, returndata, errorMessage);\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but performing a delegate call.\n *\n * _Available since v3.4._\n */\n function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {\n return functionDelegateCall(target, data, \"Address: low-level delegate call failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n * but performing a delegate call.\n *\n * _Available since v3.4._\n */\n function functionDelegateCall(\n address target,\n bytes memory data,\n string memory errorMessage\n ) internal returns (bytes memory) {\n (bool success, bytes memory returndata) = target.delegatecall(data);\n return verifyCallResultFromTarget(target, success, returndata, errorMessage);\n }\n\n /**\n * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling\n * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.\n *\n * _Available since v4.8._\n */\n function verifyCallResultFromTarget(\n address target,\n bool success,\n bytes memory returndata,\n string memory errorMessage\n ) internal view returns (bytes memory) {\n if (success) {\n if (returndata.length == 0) {\n // only check isContract if the call was successful and the return data is empty\n // otherwise we already know that it was a contract\n require(isContract(target), \"Address: call to non-contract\");\n }\n return returndata;\n } else {\n _revert(returndata, errorMessage);\n }\n }\n\n /**\n * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the\n * revert reason or using the provided one.\n *\n * _Available since v4.3._\n */\n function verifyCallResult(\n bool success,\n bytes memory returndata,\n string memory errorMessage\n ) internal pure returns (bytes memory) {\n if (success) {\n return returndata;\n } else {\n _revert(returndata, errorMessage);\n }\n }\n\n function _revert(bytes memory returndata, string memory errorMessage) private pure {\n // Look for revert reason and bubble it up if present\n if (returndata.length > 0) {\n // The easiest way to bubble the revert reason is using memory via assembly\n /// @solidity memory-safe-assembly\n assembly {\n let returndata_size := mload(returndata)\n revert(add(32, returndata), returndata_size)\n }\n } else {\n revert(errorMessage);\n }\n }\n}\n"
},
"lib/openzeppelin-contracts/contracts/utils/Context.sol": {
"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n function _msgSender() internal view virtual returns (address) {\n return msg.sender;\n }\n\n function _msgData() internal view virtual returns (bytes calldata) {\n return msg.data;\n }\n}\n"
},
"lib/operator-filter-registry/src/DefaultOperatorFilterer.sol": {
"content": "// SPDX-License-Identifier: MIT\npragma solidity ^0.8.13;\n\nimport {OperatorFilterer} from \"./OperatorFilterer.sol\";\n\n/**\n * @title DefaultOperatorFilterer\n * @notice Inherits from OperatorFilterer and automatically subscribes to the default OpenSea subscription.\n */\nabstract contract DefaultOperatorFilterer is OperatorFilterer {\n address constant DEFAULT_SUBSCRIPTION = address(0x3cc6CddA760b79bAfa08dF41ECFA224f810dCeB6);\n\n constructor() OperatorFilterer(DEFAULT_SUBSCRIPTION, true) {}\n}\n"
},
"lib/operator-filter-registry/src/IOperatorFilterRegistry.sol": {
"content": "// SPDX-License-Identifier: MIT\npragma solidity ^0.8.13;\n\ninterface IOperatorFilterRegistry {\n function isOperatorAllowed(address registrant, address operator) external view returns (bool);\n function register(address registrant) external;\n function registerAndSubscribe(address registrant, address subscription) external;\n function registerAndCopyEntries(address registrant, address registrantToCopy) external;\n function unregister(address addr) external;\n function updateOperator(address registrant, address operator, bool filtered) external;\n function updateOperators(address registrant, address[] calldata operators, bool filtered) external;\n function updateCodeHash(address registrant, bytes32 codehash, bool filtered) external;\n function updateCodeHashes(address registrant, bytes32[] calldata codeHashes, bool filtered) external;\n function subscribe(address registrant, address registrantToSubscribe) external;\n function unsubscribe(address registrant, bool copyExistingEntries) external;\n function subscriptionOf(address addr) external returns (address registrant);\n function subscribers(address registrant) external returns (address[] memory);\n function subscriberAt(address registrant, uint256 index) external returns (address);\n function copyEntriesOf(address registrant, address registrantToCopy) external;\n function isOperatorFiltered(address registrant, address operator) external returns (bool);\n function isCodeHashOfFiltered(address registrant, address operatorWithCode) external returns (bool);\n function isCodeHashFiltered(address registrant, bytes32 codeHash) external returns (bool);\n function filteredOperators(address addr) external returns (address[] memory);\n function filteredCodeHashes(address addr) external returns (bytes32[] memory);\n function filteredOperatorAt(address registrant, uint256 index) external returns (address);\n function filteredCodeHashAt(address registrant, uint256 index) external returns (bytes32);\n function isRegistered(address addr) external returns (bool);\n function codeHashOf(address addr) external returns (bytes32);\n}\n"
},
"lib/operator-filter-registry/src/OperatorFilterer.sol": {
"content": "// SPDX-License-Identifier: MIT\npragma solidity ^0.8.13;\n\nimport {IOperatorFilterRegistry} from \"./IOperatorFilterRegistry.sol\";\n\n/**\n * @title OperatorFilterer\n * @notice Abstract contract whose constructor automatically registers and optionally subscribes to or copies another\n * registrant's entries in the OperatorFilterRegistry.\n * @dev This smart contract is meant to be inherited by token contracts so they can use the following:\n * - `onlyAllowedOperator` modifier for `transferFrom` and `safeTransferFrom` methods.\n * - `onlyAllowedOperatorApproval` modifier for `approve` and `setApprovalForAll` methods.\n */\nabstract contract OperatorFilterer {\n error OperatorNotAllowed(address operator);\n\n IOperatorFilterRegistry public constant OPERATOR_FILTER_REGISTRY =\n IOperatorFilterRegistry(0x000000000000AAeB6D7670E522A718067333cd4E);\n\n constructor(address subscriptionOrRegistrantToCopy, bool subscribe) {\n // If an inheriting token contract is deployed to a network without the registry deployed, the modifier\n // will not revert, but the contract will need to be registered with the registry once it is deployed in\n // order for the modifier to filter addresses.\n if (address(OPERATOR_FILTER_REGISTRY).code.length > 0) {\n if (subscribe) {\n OPERATOR_FILTER_REGISTRY.registerAndSubscribe(address(this), subscriptionOrRegistrantToCopy);\n } else {\n if (subscriptionOrRegistrantToCopy != address(0)) {\n OPERATOR_FILTER_REGISTRY.registerAndCopyEntries(address(this), subscriptionOrRegistrantToCopy);\n } else {\n OPERATOR_FILTER_REGISTRY.register(address(this));\n }\n }\n }\n }\n\n modifier onlyAllowedOperator(address from) virtual {\n // Allow spending tokens from addresses with balance\n // Note that this still allows listings and marketplaces with escrow to transfer tokens if transferred\n // from an EOA.\n if (from != msg.sender) {\n _checkFilterOperator(msg.sender);\n }\n _;\n }\n\n modifier onlyAllowedOperatorApproval(address operator) virtual {\n _checkFilterOperator(operator);\n _;\n }\n\n function _checkFilterOperator(address operator) internal view virtual {\n // Check registry code length to facilitate testing in environments without a deployed registry.\n if (address(OPERATOR_FILTER_REGISTRY).code.length > 0) {\n if (!OPERATOR_FILTER_REGISTRY.isOperatorAllowed(address(this), operator)) {\n revert OperatorNotAllowed(operator);\n }\n }\n }\n}\n"
},
"src/BeepBoopCharger.sol": {
"content": "// SPDX-License-Identifier: MIT\npragma solidity ^0.8.16;\n\nimport {Ownable} from \"@oz/access/Ownable.sol\";\nimport {Pausable} from \"@oz/security/Pausable.sol\";\nimport {IERC20} from \"@oz/token/ERC20/IERC20.sol\";\nimport {ERC721A, IERC721A, ERC721AQueryable} from \"@erc721a/extensions/ERC721AQueryable.sol\";\nimport {IBeepBoop} from \"./interfaces/IBeepBoop.sol\";\nimport {IBattleZone} from \"./interfaces/IBattleZone.sol\";\nimport {DefaultOperatorFilterer} from \"@os/DefaultOperatorFilterer.sol\";\nimport {Address} from \"@oz/utils/Address.sol\";\n\ncontract BeepBoopCharger is\n ERC721AQueryable,\n DefaultOperatorFilterer,\n Pausable,\n Ownable\n{\n /// @notice Maximum supply\n uint256 public MAX_SUPPLY = 20000;\n\n /// @notice Base URI for the NFT collection\n string private baseURI;\n\n /// @notice BattleZone contract\n IBattleZone public immutable battleZone;\n\n /// @notice Mint price\n uint256 public mintPrice;\n\n constructor(\n string memory baseURI_,\n address battleZone_,\n uint256 mintPrice_\n ) ERC721A(\"Beep Boop Charger\", \"BBC\") {\n baseURI = baseURI_;\n mintPrice = mintPrice_;\n battleZone = IBattleZone(battleZone_);\n _pause();\n }\n\n /**\n * @notice Purchase a charger\n */\n function mint(uint256 quantity)\n public\n payable\n whenNotPaused\n whileNotSoldOut(quantity)\n {\n require(msg.value >= mintPrice * quantity, \"Not enough ETH\");\n _mint(msg.sender, quantity);\n }\n\n modifier whileNotSoldOut(uint256 quantity) {\n require(_totalMinted() + quantity <= MAX_SUPPLY, \"Hit max supply\");\n _;\n }\n\n /**\n * @notice Contract withdrawal\n */\n function withdraw() public onlyOwner {\n uint256 balance = address(this).balance;\n Address.sendValue(\n payable(0xEE547a830A9a54653de3D40A67bd2BC050DAeD81),\n (balance * 80) / 100\n );\n Address.sendValue(\n payable(0x2b6b97A1ec523e3F97FB749D5a6a8173B589834A),\n (balance * 20) / 100\n );\n }\n\n /**\n * @notice Admin mint specific address\n * @param recipient Receiver of the pass\n * @param quantity Quantity to mint\n */\n function adminMint(address recipient, uint256 quantity)\n public\n whileNotSoldOut(quantity)\n onlyOwner\n {\n _mint(recipient, quantity);\n }\n\n /**\n * @notice Set the base URI of the token\n * @param baseURI_ The base URI of the collection\n */\n function setBaseURI(string memory baseURI_) external onlyOwner {\n baseURI = baseURI_;\n }\n\n /**\n * @notice Return the base uri of the ERC721\n */\n function _baseURI() internal view virtual override returns (string memory) {\n return baseURI;\n }\n\n /**\n * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n */\n function tokenURI(uint256 tokenId)\n public\n view\n virtual\n override(ERC721A, IERC721A)\n returns (string memory)\n {\n if (!_exists(tokenId)) revert URIQueryForNonexistentToken();\n return\n bytes(baseURI).length != 0\n ? string(abi.encodePacked(baseURI, _toString(tokenId), \".json\"))\n : \"\";\n }\n\n /**\n * @notice Pre-approve the battlezone contract to save users fees\n */\n function isApprovedForAll(address owner, address operator)\n public\n view\n virtual\n override(ERC721A, IERC721A)\n returns (bool)\n {\n if (operator == address(battleZone)) {\n return true;\n }\n return super.isApprovedForAll(owner, operator);\n }\n\n /**\n * @dev Returns the starting token ID.\n */\n function _startTokenId() internal view virtual override returns (uint256) {\n return 1;\n }\n\n /**\n * @notice Modify price\n */\n function setMintPrice(uint256 price) public onlyOwner {\n mintPrice = price;\n }\n\n /**\n * @notice Toggle the sale\n */\n function toggleSale() public onlyOwner {\n if (paused()) {\n _unpause();\n } else {\n _pause();\n }\n }\n\n /**\n * @notice See {IERC721A}.transferFrom\n */\n function transferFrom(\n address from,\n address to,\n uint256 tokenId\n ) public payable override(ERC721A, IERC721A) onlyAllowedOperator(from) {\n super.transferFrom(from, to, tokenId);\n }\n\n /**\n * @notice See {IERC721A}.safeTransferFrom\n */\n function safeTransferFrom(\n address from,\n address to,\n uint256 tokenId\n ) public payable override(ERC721A, IERC721A) onlyAllowedOperator(from) {\n super.safeTransferFrom(from, to, tokenId);\n }\n\n /**\n * @notice See {IERC721A}.safeTransferFrom\n */\n function safeTransferFrom(\n address from,\n address to,\n uint256 tokenId,\n bytes memory data\n ) public payable override(ERC721A, IERC721A) onlyAllowedOperator(from) {\n super.safeTransferFrom(from, to, tokenId, data);\n }\n}\n"
},
"src/interfaces/IBattleZone.sol": {
"content": "// SPDX-License-Identifier: MIT\npragma solidity ^0.8.16;\n\ninterface IBattleZone {\n event Deposit(\n address indexed staker,\n address contractAddress,\n uint256 tokensAmount\n );\n event Withdraw(\n address indexed staker,\n address contractAddress,\n uint256 tokensAmount\n );\n event AutoDeposit(\n address indexed contractAddress,\n uint256 tokenId,\n address indexed owner\n );\n event WithdrawStuckERC721(\n address indexed receiver,\n address indexed tokenAddress,\n uint256 indexed tokenId\n );\n\n function deposit(\n address contractAddress,\n uint256[] memory tokenIds,\n uint256[] memory tokenRarities,\n bytes calldata signature\n ) external;\n\n function withdraw(address contractAddress, uint256[] memory tokenIds)\n external;\n\n function depositToolboxes(uint256[] memory toolboxTokenIds) external;\n\n function withdrawToolboxes(uint256[] memory toolboxTokenIds) external;\n\n function getAccumulatedAmount(address staker)\n external\n view\n returns (uint256);\n\n function getStakerTokens(address staker)\n external\n view\n returns (\n uint256[] memory,\n uint256[] memory,\n uint256[] memory,\n uint256[] memory,\n uint256[] memory\n );\n}\n"
},
"src/interfaces/IBeepBoop.sol": {
"content": "// SPDX-License-Identifier: MIT\npragma solidity ^0.8.16;\n\ninterface IBeepBoop {\n function spendBeepBoop(address user, uint256 amount) external;\n\n function depositBeepBoopFor(address user, uint256 amount) external;\n\n function depositBeepBoop(uint256 amount) external;\n\n function getUserBalance(address user) external view returns (uint256);\n\n function mintFor(address user, uint256 amount) external;\n}\n"
}
},
"settings": {
"remappings": [
"@erc721a/=lib/erc721a/contracts/",
"@os/=lib/operator-filter-registry/src/",
"@oz-upgradeable/=lib/openzeppelin-contracts-upgradeable/contracts/",
"@oz/=lib/openzeppelin-contracts/contracts/",
"@prb/test/=lib/prb-test/src/",
"@solady/=lib/solady/src/",
"@std/=lib/forge-std/src/",
"ds-test/=lib/forge-std/lib/ds-test/src/",
"erc4626-tests/=lib/operator-filter-registry/lib/openzeppelin-contracts/lib/erc4626-tests/",
"erc721a/=lib/erc721a/contracts/",
"forge-std/=lib/forge-std/src/",
"openzeppelin-contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/contracts/",
"openzeppelin-contracts/=lib/openzeppelin-contracts/contracts/",
"operator-filter-registry/=lib/operator-filter-registry/src/",
"prb-test/=lib/prb-test/src/",
"solady/=lib/solady/src/",
"solmate/=lib/solady/lib/solmate/src/"
],
"optimizer": {
"enabled": true,
"runs": 200
},
"metadata": {
"bytecodeHash": "ipfs"
},
"outputSelection": {
"*": {
"*": [
"evm.bytecode",
"evm.deployedBytecode",
"devdoc",
"userdoc",
"metadata",
"abi"
]
}
},
"evmVersion": "london",
"libraries": {}
}
}