{ "language": "Solidity", "sources": { "contracts/BASKETBALLNFT.sol": { "content": "// SPDX-License-Identifier: MIT\npragma solidity ^0.8.0;\n\nimport \"erc721a-upgradeable/contracts/ERC721AUpgradeable.sol\";\nimport \"@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol\";\n\ncontract BASKETBALLNFT is ERC721AUpgradeable, OwnableUpgradeable {\n enum SetIndex {\n ModelChangeSeries,\n StarCard\n }\n\n enum RarityIndex {\n Legendary,\n Epic,\n Rare,\n Common\n }\n\n enum SeriesIndex {\n Basketball_frame_A,\n Basketball_frame_B,\n Bitcoin,\n Mini_Uniform,\n Anime_characters,\n Card_Box,\n Science_fiction,\n Dollars,\n Virtual_Sneakers,\n Figure_box,\n Monkeys,\n Switching_Card,\n Science_Card,\n Gold_Card,\n Card_Circles,\n Card_Red,\n Card_White\n }\n\n struct Attributes {\n uint8 set;\n uint8 rarity;\n uint32 player;\n uint8 series;\n }\n\n struct AirdropUser {\n Attributes[] attributes;\n uint256 amount;\n uint256[] tokenIDs;\n address receiver;\n }\n\n struct AirdropKOL {\n Attributes[] attributes;\n uint256 amount;\n address receiver;\n }\n\n uint256 public maxSupply;\n // vault\n address public vault;\n address public vaultForDrop;\n // airdrop\n mapping(uint256 => bool) public claimed;\n\n // reveal\n string public blindBoxBaseURI;\n uint256[] public stageIDs;\n mapping(uint256 => string) public revealedBaseURI;\n\n string[] public Set;\n string[] public Rarity;\n string[] public Series;\n uint32[] public Player;\n\n uint32[] public playerList;\n\n mapping(uint256 => Attributes) public attribute;\n // player => rarity => set => series => number\n mapping(uint32 => mapping(uint8 => mapping(uint8 => mapping(uint8 => uint32))))\n public cardNumber;\n\n function initialize(\n string memory name,\n string memory symbol,\n address _vault,\n address _vaultForDrop\n ) public initializerERC721A initializer {\n __ERC721A_init(name, symbol);\n __Ownable_init();\n\n maxSupply = 10000;\n Set = [\"Model Change\", \"Star Card\"];\n Rarity = [\"Legendary\", \"Epic\", \"Rare\", \"Common\"];\n Series = [\n \"Basketball_frame_A\",\n \"Basketball_frame_B\",\n \"Bitcoin\",\n \"Mini_Uniform\",\n \"Anime_characters\",\n \"Card_Box\",\n \"Science_fiction\",\n \"Dollars\",\n \"Virtual_Sneakers\",\n \"Figure_box\",\n \"Monkeys\",\n \"Switching_Card\",\n \"Science_Card\",\n \"Gold_Card\",\n \"Card_Circles\",\n \"Card_Red\",\n \"Card_White\"\n ];\n // 210, 212, 213, 214, 215, 217, 2123, 2124 active players \n // 211, 218, 2110, 2128 transfer player (Can only be used for airdrops)\n Player = [210, 212, 213, 214, 215, 217, 2123, 2124, 211, 218, 2110, 2128];\n // 214 does not belong to this exchange reserve collection\n playerList = [210, 212, 213, 215, 217, 2123, 2124];\n\n vault = _vault;\n vaultForDrop = _vaultForDrop;\n\n for (uint256 i = 0; i < playerList.length; i++) {\n cardNumber[playerList[i]][uint8(RarityIndex.Rare)][\n uint8(SetIndex.StarCard)\n ][uint8(SeriesIndex.Gold_Card)] = 133;\n }\n }\n\n event BlindBoxOpen(uint256 tokenId);\n event ChangeBaseURI(uint256 tokenId);\n event Exchange(\n uint256[] payTokenIDs,\n uint256 payDropTokenID,\n uint256 newTokenID,\n address sender\n );\n event MintBatch(uint256 firstTokenID, uint256 amount, address sender);\n event Claimed(uint256[] tokenIDs);\n\n /// @notice The user uses any 3 Star Card Set and common NFTs and 1 transfer player NFT to replace any Rare NFT.\n /// @dev A player will be randomly selected from the Player as the NFT player attribute.\n /// @dev If a player's NFT is exhausted, the player will be skipped.\n /// @dev Approve is not required because there is no external call, msg.sender is owner of NFT.\n /// @param payTokenIDs 3 common NFTs's tokenIDs\n /// @param payDropTokenID transfer player NFT's tokenID\n function exchange(uint256[] calldata payTokenIDs, uint256 payDropTokenID)\n public\n {\n uint256 length = payTokenIDs.length;\n require(length == 3, \"param length error\");\n require(playerList.length != 0, \"has no card\");\n // Transfer Player NFT Verification\n uint32 player = attribute[payDropTokenID].player;\n require(\n (player == 211 ||\n player == 218 ||\n player == 2110 ||\n player == 2128) &&\n attribute[payDropTokenID].set == uint8(SetIndex.StarCard) &&\n attribute[payDropTokenID].rarity == uint8(RarityIndex.Common),\n \"drop error\"\n );\n for (uint256 i = 0; i < length; i++) {\n // must be common and StarCard NFT\n require(\n attribute[payTokenIDs[i]].set == uint8(SetIndex.StarCard) &&\n attribute[payTokenIDs[i]].rarity ==\n uint8(RarityIndex.Common),\n \"pay token error\"\n );\n transferFrom(msg.sender, vault, payTokenIDs[i]);\n }\n transferFrom(msg.sender, vaultForDrop, payDropTokenID);\n\n // Pick a player at random\n uint256 randomNumber = uint256(\n keccak256(\n abi.encodePacked(\n block.timestamp,\n blockhash(block.number - 1),\n payDropTokenID,\n msg.sender\n )\n )\n );\n uint256 index = randomNumber % playerList.length;\n uint32 plyer = playerList[index];\n\n // Determine if the player's backup NFT has been exhausted.\n // The number of players' spare NFTs is reduced by one.\n cardNumber[plyer][uint8(RarityIndex.Rare)][uint8(SetIndex.StarCard)][uint8(SeriesIndex.Gold_Card)]--;\n if (\n cardNumber[plyer][uint8(RarityIndex.Rare)][\n uint8(SetIndex.StarCard)\n ][uint8(SeriesIndex.Gold_Card)] == 0\n ) {\n playerList[index] = playerList[playerList.length - 1];\n playerList.pop();\n }\n\n uint256 tokenID = totalSupply();\n attribute[tokenID] = Attributes({\n set: uint8(SetIndex.StarCard),\n rarity: uint8(RarityIndex.Rare),\n player: plyer,\n series: uint8(SeriesIndex.Gold_Card)\n });\n\n // mint\n _safeMint(msg.sender, 1);\n emit Exchange(payTokenIDs, payDropTokenID, tokenID, msg.sender);\n }\n\n /* --------------- airdrop --------------- */\n\n /// @notice According to the NFT data held by the users, the project party subjectively distributes the airdrop to user. Users must hold NFTs that have not been airdropped.\n /// @dev The smaller index in attributes, the smaller the minted NFT's tokenID corresponding to the element.\n /// @param dropData Airdrop data.\n function airdropToUser(AirdropUser[] calldata dropData) public onlyOwner {\n require(dropData.length <= 50, \"to much drop\");\n uint256 leng;\n for (uint256 i; i < dropData.length; i++) {\n leng += dropData[i].tokenIDs.length;\n }\n uint256[] memory claimedTokenIDs = new uint256[](leng);\n uint256 len;\n\n for (uint256 i; i < dropData.length; i++) {\n AirdropUser memory data = dropData[i];\n require(data.attributes.length == data.amount, \"param error\");\n require(data.tokenIDs.length != 0, \"tokenIDs error\");\n for (uint256 j; j < data.tokenIDs.length; j++) {\n require(\n ownerOf(data.tokenIDs[j]) == data.receiver,\n \"receiver is not owner of the tokenID\"\n );\n require(!claimed[data.tokenIDs[j]], \"tokenID has claimed\");\n claimed[data.tokenIDs[j]] = true;\n claimedTokenIDs[len] = data.tokenIDs[j];\n len++;\n }\n uint256 totalSupply_ = totalSupply();\n for (uint256 j; j < data.amount; j++) {\n attribute[totalSupply_ + j] = data.attributes[j];\n }\n _safeMint(data.receiver, data.amount);\n }\n emit Claimed(claimedTokenIDs);\n }\n\n /// @notice The project party subjectively distributes the airdrop to KOL.\n /// @dev The average number of airdrops per KOL does not exceed 5 because of the block gas limit.\n /// @param dropData Airdrop data.\n function airdropToKOL(AirdropKOL[] calldata dropData) public onlyOwner {\n require(dropData.length <= 50, \"to much drop\");\n for (uint256 i; i < dropData.length; i++) {\n AirdropKOL memory data = dropData[i];\n require(data.attributes.length == data.amount, \"param error\");\n\n uint256 totalSupply_ = totalSupply();\n for (uint256 j; j < data.amount; j++) {\n attribute[totalSupply_ + j] = data.attributes[j];\n }\n _safeMint(data.receiver, data.amount);\n }\n }\n\n /* --------------- binance --------------- */\n\n /// @notice The project party mint batch NFTs to binance.\n /// @param amount The number of NFTs minted.\n /// @param receiver Binance's address for receiving NFTs.\n function mintBatch(uint256 amount, address receiver) public onlyOwner {\n uint256 firstTokenID = totalSupply();\n _safeMint(receiver, amount);\n emit MintBatch(firstTokenID, amount, receiver);\n }\n\n /* --------------- nft card parameters --------------- */\n\n /// @notice The owner writes the number of NFTs of each player in all subdivision branches.\n /// @dev The length of the two parameters must be the same and cannot exceed 200.\n /// @param attrs List of various types of NFT attributes in business scenarios.\n /// @param numbers The number of NFTs in this branche.\n function setNFTNumber(\n Attributes[] calldata attrs,\n uint32[] calldata numbers\n ) public onlyOwner {\n require(numbers.length <= 200, \"too much params\");\n require(attrs.length == numbers.length, \"params length error\");\n\n for (uint256 i; i < attrs.length; i++) {\n uint32 player_ = attrs[i].player;\n uint8 rarity_ = attrs[i].rarity;\n uint8 set_ = attrs[i].set;\n uint8 serie_ = attrs[i].series;\n uint32 number_ = numbers[i];\n\n cardNumber[player_][rarity_][set_][serie_] = number_;\n }\n }\n\n /// @notice The owner reset playerList for new exchange rule.\n /// @param playerList_ New playerList value.\n function setPlayerList(uint32[] calldata playerList_) public onlyOwner {\n playerList = playerList_;\n }\n\n /* --------------- owner config --------------- */\n function setSet(uint256 index, string memory value) public onlyOwner {\n Set[index] = value;\n }\n\n function setRarity(uint256 index, string memory value) public onlyOwner {\n Rarity[index] = value;\n }\n\n function setSeries(uint256 index, string memory value) public onlyOwner {\n Series[index] = value;\n }\n\n function setPlayer(uint256 index, uint32 value) public onlyOwner {\n Player[index] = value;\n }\n\n /* --------------- reveal --------------- */\n\n /// @notice When opening the blind box, the owner sets the properties of the NFT.\n /// @dev The length of the two parameters must be the same and cannot exceed 200.\n /// @param tokenIDs The TokenID of the NFT to be set.\n /// @param attributes The attributes of the NFT to be set.\n function setAttributes(\n uint256[] calldata tokenIDs,\n Attributes[] calldata attributes\n ) public onlyOwner {\n require(tokenIDs.length <= 200, \"too much params\");\n require(tokenIDs.length == attributes.length, \"params length error\");\n for (uint256 i = 0; i < tokenIDs.length; i++) {\n attribute[tokenIDs[i]] = attributes[i];\n }\n }\n\n /// @notice Get the properties of the NFT and display it in a human readable form.\n /// @param tokenID The tokenID of the NFT to be queried.\n function getTokenAttributes(uint256 tokenID)\n public\n view\n returns (\n string memory set,\n string memory rarity,\n string memory series,\n uint32 player\n )\n {\n Attributes memory attr = attribute[tokenID];\n require(attr.player != 0, \"this tokenID has not attribute\");\n return (\n Set[attr.set],\n Rarity[attr.rarity],\n Series[attr.series],\n attr.player\n );\n }\n\n /// @notice The owner set blindbox baseURI.\n function setBlindBoxURI(string memory _blindBoxBaseURI) public onlyOwner {\n blindBoxBaseURI = _blindBoxBaseURI;\n }\n\n /// @notice Open blind boxes in batches. Each time it is called, (${id last call}, id] baseURI is set.\n /// @param id The maximum tokenID currently opened.\n /// @param baseURI_ The baseURI of the latest set interval.\n function setBaseURI(uint256 id, string memory baseURI_) public onlyOwner {\n if (stageIDs.length != 0) {\n require(\n stageIDs[stageIDs.length - 1] < id,\n \"id should be self-incrementing\"\n );\n }\n stageIDs.push(id);\n revealedBaseURI[id] = baseURI_;\n emit BlindBoxOpen(id);\n }\n\n /// @notice Used to modify the wrong parameters passed in by setBaseURI.\n function changeURI(uint256 id, string memory baseURI_) public onlyOwner {\n require(\n bytes(revealedBaseURI[id]).length != 0,\n \"URI corresponding to id should not be empty\"\n );\n revealedBaseURI[id] = baseURI_;\n emit ChangeBaseURI(id);\n }\n\n /// @notice Query the URI of NFT metadata, which conforms to the ERC72 protocol.\n /// @dev Because the baseURI of each interval where the tokenID is located is different, the binary search method is used here to improve the query efficiency.\n /// @dev Except for 0, tokenIDs are divided in the way of opening and closing before, eg: (x,y].\n /// @param tokenId The tokenID of the NFT to be queried.\n /// @return The URI of the NFT to be queried.\n function tokenURI(uint256 tokenId)\n public\n view\n override\n returns (string memory)\n {\n require(_exists(tokenId), \"token id is not exist.\");\n string memory baseURI_;\n uint256 len = stageIDs.length;\n // binary search\n if (len == 0) {\n baseURI_ = blindBoxBaseURI;\n } else {\n uint256 left;\n uint256 right = len - 1;\n\n // (x,y]\n for (; left <= right; ) {\n uint256 midIndex = (left + right) / 2;\n if (midIndex == 0) {\n if (tokenId <= stageIDs[0]) {\n baseURI_ = revealedBaseURI[stageIDs[0]];\n break;\n } else if (len == 1) {\n baseURI_ = blindBoxBaseURI;\n break;\n } else {\n if (tokenId <= stageIDs[1]) {\n baseURI_ = revealedBaseURI[stageIDs[1]];\n break;\n } else {\n baseURI_ = blindBoxBaseURI;\n break;\n }\n }\n }\n\n if (tokenId <= stageIDs[midIndex]) {\n if (tokenId > stageIDs[midIndex - 1]) {\n baseURI_ = revealedBaseURI[stageIDs[midIndex]];\n break;\n }\n right = midIndex - 1;\n } else {\n left = midIndex;\n if (midIndex == right - 1) {\n if (tokenId > stageIDs[right]) {\n baseURI_ = blindBoxBaseURI;\n break;\n }\n left = right;\n }\n }\n }\n }\n\n return\n bytes(baseURI_).length > 0\n ? string(abi.encodePacked(baseURI_, _toString(tokenId)))\n : string(abi.encodePacked(blindBoxBaseURI, _toString(tokenId)));\n }\n\n function _beforeTokenTransfers(\n address from,\n address to,\n uint256 startTokenId,\n uint256 quantity\n ) internal override {\n if (from == address(0)) {\n require(totalSupply() + quantity <= maxSupply, \"exceeded maximum supply\");\n }\n }\n\n /* --------------- modifiers --------------- */\n}\n" }, "erc721a-upgradeable/contracts/ERC721AUpgradeable.sol": { "content": "// SPDX-License-Identifier: MIT\n// ERC721A Contracts v4.2.0\n// Creator: Chiru Labs\n\npragma solidity ^0.8.4;\n\nimport './IERC721AUpgradeable.sol';\nimport {ERC721AStorage} from './ERC721AStorage.sol';\nimport './ERC721A__Initializable.sol';\n\n/**\n * @dev Interface of ERC721 token receiver.\n */\ninterface ERC721A__IERC721ReceiverUpgradeable {\n function onERC721Received(\n address operator,\n address from,\n uint256 tokenId,\n bytes calldata data\n ) external returns (bytes4);\n}\n\n/**\n * @title ERC721A\n *\n * @dev Implementation of the [ERC721](https://eips.ethereum.org/EIPS/eip-721)\n * Non-Fungible Token Standard, including the Metadata extension.\n * Optimized for lower gas during batch mints.\n *\n * Token IDs are minted in sequential order (e.g. 0, 1, 2, 3, ...)\n * starting from `_startTokenId()`.\n *\n * Assumptions:\n *\n * - An owner cannot have more than 2**64 - 1 (max value of uint64) of supply.\n * - The maximum token ID cannot exceed 2**256 - 1 (max value of uint256).\n */\ncontract ERC721AUpgradeable is ERC721A__Initializable, IERC721AUpgradeable {\n using ERC721AStorage for ERC721AStorage.Layout;\n // Reference type for token approval.\n struct TokenApprovalRef {\n address value;\n }\n\n // =============================================================\n // CONSTANTS\n // =============================================================\n\n // Mask of an entry in packed address data.\n uint256 private constant _BITMASK_ADDRESS_DATA_ENTRY = (1 << 64) - 1;\n\n // The bit position of `numberMinted` in packed address data.\n uint256 private constant _BITPOS_NUMBER_MINTED = 64;\n\n // The bit position of `numberBurned` in packed address data.\n uint256 private constant _BITPOS_NUMBER_BURNED = 128;\n\n // The bit position of `aux` in packed address data.\n uint256 private constant _BITPOS_AUX = 192;\n\n // Mask of all 256 bits in packed address data except the 64 bits for `aux`.\n uint256 private constant _BITMASK_AUX_COMPLEMENT = (1 << 192) - 1;\n\n // The bit position of `startTimestamp` in packed ownership.\n uint256 private constant _BITPOS_START_TIMESTAMP = 160;\n\n // The bit mask of the `burned` bit in packed ownership.\n uint256 private constant _BITMASK_BURNED = 1 << 224;\n\n // The bit position of the `nextInitialized` bit in packed ownership.\n uint256 private constant _BITPOS_NEXT_INITIALIZED = 225;\n\n // The bit mask of the `nextInitialized` bit in packed ownership.\n uint256 private constant _BITMASK_NEXT_INITIALIZED = 1 << 225;\n\n // The bit position of `extraData` in packed ownership.\n uint256 private constant _BITPOS_EXTRA_DATA = 232;\n\n // Mask of all 256 bits in a packed ownership except the 24 bits for `extraData`.\n uint256 private constant _BITMASK_EXTRA_DATA_COMPLEMENT = (1 << 232) - 1;\n\n // The mask of the lower 160 bits for addresses.\n uint256 private constant _BITMASK_ADDRESS = (1 << 160) - 1;\n\n // The maximum `quantity` that can be minted with {_mintERC2309}.\n // This limit is to prevent overflows on the address data entries.\n // For a limit of 5000, a total of 3.689e15 calls to {_mintERC2309}\n // is required to cause an overflow, which is unrealistic.\n uint256 private constant _MAX_MINT_ERC2309_QUANTITY_LIMIT = 5000;\n\n // The `Transfer` event signature is given by:\n // `keccak256(bytes(\"Transfer(address,address,uint256)\"))`.\n bytes32 private constant _TRANSFER_EVENT_SIGNATURE =\n 0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef;\n\n // =============================================================\n // CONSTRUCTOR\n // =============================================================\n\n function __ERC721A_init(string memory name_, string memory symbol_) internal onlyInitializingERC721A {\n __ERC721A_init_unchained(name_, symbol_);\n }\n\n function __ERC721A_init_unchained(string memory name_, string memory symbol_) internal onlyInitializingERC721A {\n ERC721AStorage.layout()._name = name_;\n ERC721AStorage.layout()._symbol = symbol_;\n ERC721AStorage.layout()._currentIndex = _startTokenId();\n }\n\n // =============================================================\n // TOKEN COUNTING OPERATIONS\n // =============================================================\n\n /**\n * @dev Returns the starting token ID.\n * To change the starting token ID, please override this function.\n */\n function _startTokenId() internal view virtual returns (uint256) {\n return 0;\n }\n\n /**\n * @dev Returns the next token ID to be minted.\n */\n function _nextTokenId() internal view virtual returns (uint256) {\n return ERC721AStorage.layout()._currentIndex;\n }\n\n /**\n * @dev Returns the total number of tokens in existence.\n * Burned tokens will reduce the count.\n * To get the total number of tokens minted, please see {_totalMinted}.\n */\n function totalSupply() public view virtual override returns (uint256) {\n // Counter underflow is impossible as _burnCounter cannot be incremented\n // more than `_currentIndex - _startTokenId()` times.\n unchecked {\n return ERC721AStorage.layout()._currentIndex - ERC721AStorage.layout()._burnCounter - _startTokenId();\n }\n }\n\n /**\n * @dev Returns the total amount of tokens minted in the contract.\n */\n function _totalMinted() internal view virtual returns (uint256) {\n // Counter underflow is impossible as `_currentIndex` does not decrement,\n // and it is initialized to `_startTokenId()`.\n unchecked {\n return ERC721AStorage.layout()._currentIndex - _startTokenId();\n }\n }\n\n /**\n * @dev Returns the total number of tokens burned.\n */\n function _totalBurned() internal view virtual returns (uint256) {\n return ERC721AStorage.layout()._burnCounter;\n }\n\n // =============================================================\n // ADDRESS DATA OPERATIONS\n // =============================================================\n\n /**\n * @dev Returns the number of tokens in `owner`'s account.\n */\n function balanceOf(address owner) public view virtual override returns (uint256) {\n if (owner == address(0)) revert BalanceQueryForZeroAddress();\n return ERC721AStorage.layout()._packedAddressData[owner] & _BITMASK_ADDRESS_DATA_ENTRY;\n }\n\n /**\n * Returns the number of tokens minted by `owner`.\n */\n function _numberMinted(address owner) internal view returns (uint256) {\n return\n (ERC721AStorage.layout()._packedAddressData[owner] >> _BITPOS_NUMBER_MINTED) & _BITMASK_ADDRESS_DATA_ENTRY;\n }\n\n /**\n * Returns the number of tokens burned by or on behalf of `owner`.\n */\n function _numberBurned(address owner) internal view returns (uint256) {\n return\n (ERC721AStorage.layout()._packedAddressData[owner] >> _BITPOS_NUMBER_BURNED) & _BITMASK_ADDRESS_DATA_ENTRY;\n }\n\n /**\n * Returns the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).\n */\n function _getAux(address owner) internal view returns (uint64) {\n return uint64(ERC721AStorage.layout()._packedAddressData[owner] >> _BITPOS_AUX);\n }\n\n /**\n * Sets the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).\n * If there are multiple variables, please pack them into a uint64.\n */\n function _setAux(address owner, uint64 aux) internal virtual {\n uint256 packed = ERC721AStorage.layout()._packedAddressData[owner];\n uint256 auxCasted;\n // Cast `aux` with assembly to avoid redundant masking.\n assembly {\n auxCasted := aux\n }\n packed = (packed & _BITMASK_AUX_COMPLEMENT) | (auxCasted << _BITPOS_AUX);\n ERC721AStorage.layout()._packedAddressData[owner] = packed;\n }\n\n // =============================================================\n // IERC165\n // =============================================================\n\n /**\n * @dev Returns true if this contract implements the interface defined by\n * `interfaceId`. See the corresponding\n * [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)\n * to learn more about how these ids are created.\n *\n * This function call must use less than 30000 gas.\n */\n function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n // The interface IDs are constants representing the first 4 bytes\n // of the XOR of all function selectors in the interface.\n // See: [ERC165](https://eips.ethereum.org/EIPS/eip-165)\n // (e.g. `bytes4(i.functionA.selector ^ i.functionB.selector ^ ...)`)\n return\n interfaceId == 0x01ffc9a7 || // ERC165 interface ID for ERC165.\n interfaceId == 0x80ac58cd || // ERC165 interface ID for ERC721.\n interfaceId == 0x5b5e139f; // ERC165 interface ID for ERC721Metadata.\n }\n\n // =============================================================\n // IERC721Metadata\n // =============================================================\n\n /**\n * @dev Returns the token collection name.\n */\n function name() public view virtual override returns (string memory) {\n return ERC721AStorage.layout()._name;\n }\n\n /**\n * @dev Returns the token collection symbol.\n */\n function symbol() public view virtual override returns (string memory) {\n return ERC721AStorage.layout()._symbol;\n }\n\n /**\n * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n */\n function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {\n if (!_exists(tokenId)) revert URIQueryForNonexistentToken();\n\n string memory baseURI = _baseURI();\n return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, _toString(tokenId))) : '';\n }\n\n /**\n * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each\n * token will be the concatenation of the `baseURI` and the `tokenId`. Empty\n * by default, it can be overridden in child contracts.\n */\n function _baseURI() internal view virtual returns (string memory) {\n return '';\n }\n\n // =============================================================\n // OWNERSHIPS OPERATIONS\n // =============================================================\n\n /**\n * @dev Returns the owner of the `tokenId` token.\n *\n * Requirements:\n *\n * - `tokenId` must exist.\n */\n function ownerOf(uint256 tokenId) public view virtual override returns (address) {\n return address(uint160(_packedOwnershipOf(tokenId)));\n }\n\n /**\n * @dev Gas spent here starts off proportional to the maximum mint batch size.\n * It gradually moves to O(1) as tokens get transferred around over time.\n */\n function _ownershipOf(uint256 tokenId) internal view virtual returns (TokenOwnership memory) {\n return _unpackedOwnership(_packedOwnershipOf(tokenId));\n }\n\n /**\n * @dev Returns the unpacked `TokenOwnership` struct at `index`.\n */\n function _ownershipAt(uint256 index) internal view virtual returns (TokenOwnership memory) {\n return _unpackedOwnership(ERC721AStorage.layout()._packedOwnerships[index]);\n }\n\n /**\n * @dev Initializes the ownership slot minted at `index` for efficiency purposes.\n */\n function _initializeOwnershipAt(uint256 index) internal virtual {\n if (ERC721AStorage.layout()._packedOwnerships[index] == 0) {\n ERC721AStorage.layout()._packedOwnerships[index] = _packedOwnershipOf(index);\n }\n }\n\n /**\n * Returns the packed ownership data of `tokenId`.\n */\n function _packedOwnershipOf(uint256 tokenId) private view returns (uint256) {\n uint256 curr = tokenId;\n\n unchecked {\n if (_startTokenId() <= curr)\n if (curr < ERC721AStorage.layout()._currentIndex) {\n uint256 packed = ERC721AStorage.layout()._packedOwnerships[curr];\n // If not burned.\n if (packed & _BITMASK_BURNED == 0) {\n // Invariant:\n // There will always be an initialized ownership slot\n // (i.e. `ownership.addr != address(0) && ownership.burned == false`)\n // before an unintialized ownership slot\n // (i.e. `ownership.addr == address(0) && ownership.burned == false`)\n // Hence, `curr` will not underflow.\n //\n // We can directly compare the packed value.\n // If the address is zero, packed will be zero.\n while (packed == 0) {\n packed = ERC721AStorage.layout()._packedOwnerships[--curr];\n }\n return packed;\n }\n }\n }\n revert OwnerQueryForNonexistentToken();\n }\n\n /**\n * @dev Returns the unpacked `TokenOwnership` struct from `packed`.\n */\n function _unpackedOwnership(uint256 packed) private pure returns (TokenOwnership memory ownership) {\n ownership.addr = address(uint160(packed));\n ownership.startTimestamp = uint64(packed >> _BITPOS_START_TIMESTAMP);\n ownership.burned = packed & _BITMASK_BURNED != 0;\n ownership.extraData = uint24(packed >> _BITPOS_EXTRA_DATA);\n }\n\n /**\n * @dev Packs ownership data into a single uint256.\n */\n function _packOwnershipData(address owner, uint256 flags) private view returns (uint256 result) {\n assembly {\n // Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.\n owner := and(owner, _BITMASK_ADDRESS)\n // `owner | (block.timestamp << _BITPOS_START_TIMESTAMP) | flags`.\n result := or(owner, or(shl(_BITPOS_START_TIMESTAMP, timestamp()), flags))\n }\n }\n\n /**\n * @dev Returns the `nextInitialized` flag set if `quantity` equals 1.\n */\n function _nextInitializedFlag(uint256 quantity) private pure returns (uint256 result) {\n // For branchless setting of the `nextInitialized` flag.\n assembly {\n // `(quantity == 1) << _BITPOS_NEXT_INITIALIZED`.\n result := shl(_BITPOS_NEXT_INITIALIZED, eq(quantity, 1))\n }\n }\n\n // =============================================================\n // APPROVAL OPERATIONS\n // =============================================================\n\n /**\n * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n * The approval is cleared when the token is transferred.\n *\n * Only a single account can be approved at a time, so approving the\n * zero address clears previous approvals.\n *\n * Requirements:\n *\n * - The caller must own the token or be an approved operator.\n * - `tokenId` must exist.\n *\n * Emits an {Approval} event.\n */\n function approve(address to, uint256 tokenId) public virtual override {\n address owner = ownerOf(tokenId);\n\n if (_msgSenderERC721A() != owner)\n if (!isApprovedForAll(owner, _msgSenderERC721A())) {\n revert ApprovalCallerNotOwnerNorApproved();\n }\n\n ERC721AStorage.layout()._tokenApprovals[tokenId].value = to;\n emit Approval(owner, to, tokenId);\n }\n\n /**\n * @dev Returns the account approved for `tokenId` token.\n *\n * Requirements:\n *\n * - `tokenId` must exist.\n */\n function getApproved(uint256 tokenId) public view virtual override returns (address) {\n if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();\n\n return ERC721AStorage.layout()._tokenApprovals[tokenId].value;\n }\n\n /**\n * @dev Approve or remove `operator` as an operator for the caller.\n * Operators can call {transferFrom} or {safeTransferFrom}\n * for any token owned by the caller.\n *\n * Requirements:\n *\n * - The `operator` cannot be the caller.\n *\n * Emits an {ApprovalForAll} event.\n */\n function setApprovalForAll(address operator, bool approved) public virtual override {\n if (operator == _msgSenderERC721A()) revert ApproveToCaller();\n\n ERC721AStorage.layout()._operatorApprovals[_msgSenderERC721A()][operator] = approved;\n emit ApprovalForAll(_msgSenderERC721A(), operator, approved);\n }\n\n /**\n * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n *\n * See {setApprovalForAll}.\n */\n function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {\n return ERC721AStorage.layout()._operatorApprovals[owner][operator];\n }\n\n /**\n * @dev Returns whether `tokenId` exists.\n *\n * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.\n *\n * Tokens start existing when they are minted. See {_mint}.\n */\n function _exists(uint256 tokenId) internal view virtual returns (bool) {\n return\n _startTokenId() <= tokenId &&\n tokenId < ERC721AStorage.layout()._currentIndex && // If within bounds,\n ERC721AStorage.layout()._packedOwnerships[tokenId] & _BITMASK_BURNED == 0; // and not burned.\n }\n\n /**\n * @dev Returns whether `msgSender` is equal to `approvedAddress` or `owner`.\n */\n function _isSenderApprovedOrOwner(\n address approvedAddress,\n address owner,\n address msgSender\n ) private pure returns (bool result) {\n assembly {\n // Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.\n owner := and(owner, _BITMASK_ADDRESS)\n // Mask `msgSender` to the lower 160 bits, in case the upper bits somehow aren't clean.\n msgSender := and(msgSender, _BITMASK_ADDRESS)\n // `msgSender == owner || msgSender == approvedAddress`.\n result := or(eq(msgSender, owner), eq(msgSender, approvedAddress))\n }\n }\n\n /**\n * @dev Returns the storage slot and value for the approved address of `tokenId`.\n */\n function _getApprovedSlotAndAddress(uint256 tokenId)\n private\n view\n returns (uint256 approvedAddressSlot, address approvedAddress)\n {\n TokenApprovalRef storage tokenApproval = ERC721AStorage.layout()._tokenApprovals[tokenId];\n // The following is equivalent to `approvedAddress = _tokenApprovals[tokenId]`.\n assembly {\n approvedAddressSlot := tokenApproval.slot\n approvedAddress := sload(approvedAddressSlot)\n }\n }\n\n // =============================================================\n // TRANSFER OPERATIONS\n // =============================================================\n\n /**\n * @dev Transfers `tokenId` from `from` to `to`.\n *\n * Requirements:\n *\n * - `from` cannot be the zero address.\n * - `to` cannot be the zero address.\n * - `tokenId` token must be owned by `from`.\n * - If the caller is not `from`, it must be approved to move this token\n * by either {approve} or {setApprovalForAll}.\n *\n * Emits a {Transfer} event.\n */\n function transferFrom(\n address from,\n address to,\n uint256 tokenId\n ) public virtual override {\n uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);\n\n if (address(uint160(prevOwnershipPacked)) != from) revert TransferFromIncorrectOwner();\n\n (uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);\n\n // The nested ifs save around 20+ gas over a compound boolean condition.\n if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))\n if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();\n\n if (to == address(0)) revert TransferToZeroAddress();\n\n _beforeTokenTransfers(from, to, tokenId, 1);\n\n // Clear approvals from the previous owner.\n assembly {\n if approvedAddress {\n // This is equivalent to `delete _tokenApprovals[tokenId]`.\n sstore(approvedAddressSlot, 0)\n }\n }\n\n // Underflow of the sender's balance is impossible because we check for\n // ownership above and the recipient's balance can't realistically overflow.\n // Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.\n unchecked {\n // We can directly increment and decrement the balances.\n --ERC721AStorage.layout()._packedAddressData[from]; // Updates: `balance -= 1`.\n ++ERC721AStorage.layout()._packedAddressData[to]; // Updates: `balance += 1`.\n\n // Updates:\n // - `address` to the next owner.\n // - `startTimestamp` to the timestamp of transfering.\n // - `burned` to `false`.\n // - `nextInitialized` to `true`.\n ERC721AStorage.layout()._packedOwnerships[tokenId] = _packOwnershipData(\n to,\n _BITMASK_NEXT_INITIALIZED | _nextExtraData(from, to, prevOwnershipPacked)\n );\n\n // If the next slot may not have been initialized (i.e. `nextInitialized == false`) .\n if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {\n uint256 nextTokenId = tokenId + 1;\n // If the next slot's address is zero and not burned (i.e. packed value is zero).\n if (ERC721AStorage.layout()._packedOwnerships[nextTokenId] == 0) {\n // If the next slot is within bounds.\n if (nextTokenId != ERC721AStorage.layout()._currentIndex) {\n // Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.\n ERC721AStorage.layout()._packedOwnerships[nextTokenId] = prevOwnershipPacked;\n }\n }\n }\n }\n\n emit Transfer(from, to, tokenId);\n _afterTokenTransfers(from, to, tokenId, 1);\n }\n\n /**\n * @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.\n */\n function safeTransferFrom(\n address from,\n address to,\n uint256 tokenId\n ) public virtual override {\n safeTransferFrom(from, to, tokenId, '');\n }\n\n /**\n * @dev Safely transfers `tokenId` token from `from` to `to`.\n *\n * Requirements:\n *\n * - `from` cannot be the zero address.\n * - `to` cannot be the zero address.\n * - `tokenId` token must exist and be owned by `from`.\n * - If the caller is not `from`, it must be approved to move this token\n * by either {approve} or {setApprovalForAll}.\n * - If `to` refers to a smart contract, it must implement\n * {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n *\n * Emits a {Transfer} event.\n */\n function safeTransferFrom(\n address from,\n address to,\n uint256 tokenId,\n bytes memory _data\n ) public virtual override {\n transferFrom(from, to, tokenId);\n if (to.code.length != 0)\n if (!_checkContractOnERC721Received(from, to, tokenId, _data)) {\n revert TransferToNonERC721ReceiverImplementer();\n }\n }\n\n /**\n * @dev Hook that is called before a set of serially-ordered token IDs\n * are about to be transferred. This includes minting.\n * And also called before burning one token.\n *\n * `startTokenId` - the first token ID to be transferred.\n * `quantity` - the amount to be transferred.\n *\n * Calling conditions:\n *\n * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be\n * transferred to `to`.\n * - When `from` is zero, `tokenId` will be minted for `to`.\n * - When `to` is zero, `tokenId` will be burned by `from`.\n * - `from` and `to` are never both zero.\n */\n function _beforeTokenTransfers(\n address from,\n address to,\n uint256 startTokenId,\n uint256 quantity\n ) internal virtual {}\n\n /**\n * @dev Hook that is called after a set of serially-ordered token IDs\n * have been transferred. This includes minting.\n * And also called after one token has been burned.\n *\n * `startTokenId` - the first token ID to be transferred.\n * `quantity` - the amount to be transferred.\n *\n * Calling conditions:\n *\n * - When `from` and `to` are both non-zero, `from`'s `tokenId` has been\n * transferred to `to`.\n * - When `from` is zero, `tokenId` has been minted for `to`.\n * - When `to` is zero, `tokenId` has been burned by `from`.\n * - `from` and `to` are never both zero.\n */\n function _afterTokenTransfers(\n address from,\n address to,\n uint256 startTokenId,\n uint256 quantity\n ) internal virtual {}\n\n /**\n * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target contract.\n *\n * `from` - Previous owner of the given token ID.\n * `to` - Target address that will receive the token.\n * `tokenId` - Token ID to be transferred.\n * `_data` - Optional data to send along with the call.\n *\n * Returns whether the call correctly returned the expected magic value.\n */\n function _checkContractOnERC721Received(\n address from,\n address to,\n uint256 tokenId,\n bytes memory _data\n ) private returns (bool) {\n try\n ERC721A__IERC721ReceiverUpgradeable(to).onERC721Received(_msgSenderERC721A(), from, tokenId, _data)\n returns (bytes4 retval) {\n return retval == ERC721A__IERC721ReceiverUpgradeable(to).onERC721Received.selector;\n } catch (bytes memory reason) {\n if (reason.length == 0) {\n revert TransferToNonERC721ReceiverImplementer();\n } else {\n assembly {\n revert(add(32, reason), mload(reason))\n }\n }\n }\n }\n\n // =============================================================\n // MINT OPERATIONS\n // =============================================================\n\n /**\n * @dev Mints `quantity` tokens and transfers them to `to`.\n *\n * Requirements:\n *\n * - `to` cannot be the zero address.\n * - `quantity` must be greater than 0.\n *\n * Emits a {Transfer} event for each mint.\n */\n function _mint(address to, uint256 quantity) internal virtual {\n uint256 startTokenId = ERC721AStorage.layout()._currentIndex;\n if (quantity == 0) revert MintZeroQuantity();\n\n _beforeTokenTransfers(address(0), to, startTokenId, quantity);\n\n // Overflows are incredibly unrealistic.\n // `balance` and `numberMinted` have a maximum limit of 2**64.\n // `tokenId` has a maximum limit of 2**256.\n unchecked {\n // Updates:\n // - `balance += quantity`.\n // - `numberMinted += quantity`.\n //\n // We can directly add to the `balance` and `numberMinted`.\n ERC721AStorage.layout()._packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);\n\n // Updates:\n // - `address` to the owner.\n // - `startTimestamp` to the timestamp of minting.\n // - `burned` to `false`.\n // - `nextInitialized` to `quantity == 1`.\n ERC721AStorage.layout()._packedOwnerships[startTokenId] = _packOwnershipData(\n to,\n _nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)\n );\n\n uint256 toMasked;\n uint256 end = startTokenId + quantity;\n\n // Use assembly to loop and emit the `Transfer` event for gas savings.\n assembly {\n // Mask `to` to the lower 160 bits, in case the upper bits somehow aren't clean.\n toMasked := and(to, _BITMASK_ADDRESS)\n // Emit the `Transfer` event.\n log4(\n 0, // Start of data (0, since no data).\n 0, // End of data (0, since no data).\n _TRANSFER_EVENT_SIGNATURE, // Signature.\n 0, // `address(0)`.\n toMasked, // `to`.\n startTokenId // `tokenId`.\n )\n\n for {\n let tokenId := add(startTokenId, 1)\n } iszero(eq(tokenId, end)) {\n tokenId := add(tokenId, 1)\n } {\n // Emit the `Transfer` event. Similar to above.\n log4(0, 0, _TRANSFER_EVENT_SIGNATURE, 0, toMasked, tokenId)\n }\n }\n if (toMasked == 0) revert MintToZeroAddress();\n\n ERC721AStorage.layout()._currentIndex = end;\n }\n _afterTokenTransfers(address(0), to, startTokenId, quantity);\n }\n\n /**\n * @dev Mints `quantity` tokens and transfers them to `to`.\n *\n * This function is intended for efficient minting only during contract creation.\n *\n * It emits only one {ConsecutiveTransfer} as defined in\n * [ERC2309](https://eips.ethereum.org/EIPS/eip-2309),\n * instead of a sequence of {Transfer} event(s).\n *\n * Calling this function outside of contract creation WILL make your contract\n * non-compliant with the ERC721 standard.\n * For full ERC721 compliance, substituting ERC721 {Transfer} event(s) with the ERC2309\n * {ConsecutiveTransfer} event is only permissible during contract creation.\n *\n * Requirements:\n *\n * - `to` cannot be the zero address.\n * - `quantity` must be greater than 0.\n *\n * Emits a {ConsecutiveTransfer} event.\n */\n function _mintERC2309(address to, uint256 quantity) internal virtual {\n uint256 startTokenId = ERC721AStorage.layout()._currentIndex;\n if (to == address(0)) revert MintToZeroAddress();\n if (quantity == 0) revert MintZeroQuantity();\n if (quantity > _MAX_MINT_ERC2309_QUANTITY_LIMIT) revert MintERC2309QuantityExceedsLimit();\n\n _beforeTokenTransfers(address(0), to, startTokenId, quantity);\n\n // Overflows are unrealistic due to the above check for `quantity` to be below the limit.\n unchecked {\n // Updates:\n // - `balance += quantity`.\n // - `numberMinted += quantity`.\n //\n // We can directly add to the `balance` and `numberMinted`.\n ERC721AStorage.layout()._packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);\n\n // Updates:\n // - `address` to the owner.\n // - `startTimestamp` to the timestamp of minting.\n // - `burned` to `false`.\n // - `nextInitialized` to `quantity == 1`.\n ERC721AStorage.layout()._packedOwnerships[startTokenId] = _packOwnershipData(\n to,\n _nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)\n );\n\n emit ConsecutiveTransfer(startTokenId, startTokenId + quantity - 1, address(0), to);\n\n ERC721AStorage.layout()._currentIndex = startTokenId + quantity;\n }\n _afterTokenTransfers(address(0), to, startTokenId, quantity);\n }\n\n /**\n * @dev Safely mints `quantity` tokens and transfers them to `to`.\n *\n * Requirements:\n *\n * - If `to` refers to a smart contract, it must implement\n * {IERC721Receiver-onERC721Received}, which is called for each safe transfer.\n * - `quantity` must be greater than 0.\n *\n * See {_mint}.\n *\n * Emits a {Transfer} event for each mint.\n */\n function _safeMint(\n address to,\n uint256 quantity,\n bytes memory _data\n ) internal virtual {\n _mint(to, quantity);\n\n unchecked {\n if (to.code.length != 0) {\n uint256 end = ERC721AStorage.layout()._currentIndex;\n uint256 index = end - quantity;\n do {\n if (!_checkContractOnERC721Received(address(0), to, index++, _data)) {\n revert TransferToNonERC721ReceiverImplementer();\n }\n } while (index < end);\n // Reentrancy protection.\n if (ERC721AStorage.layout()._currentIndex != end) revert();\n }\n }\n }\n\n /**\n * @dev Equivalent to `_safeMint(to, quantity, '')`.\n */\n function _safeMint(address to, uint256 quantity) internal virtual {\n _safeMint(to, quantity, '');\n }\n\n // =============================================================\n // BURN OPERATIONS\n // =============================================================\n\n /**\n * @dev Equivalent to `_burn(tokenId, false)`.\n */\n function _burn(uint256 tokenId) internal virtual {\n _burn(tokenId, false);\n }\n\n /**\n * @dev Destroys `tokenId`.\n * The approval is cleared when the token is burned.\n *\n * Requirements:\n *\n * - `tokenId` must exist.\n *\n * Emits a {Transfer} event.\n */\n function _burn(uint256 tokenId, bool approvalCheck) internal virtual {\n uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);\n\n address from = address(uint160(prevOwnershipPacked));\n\n (uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);\n\n if (approvalCheck) {\n // The nested ifs save around 20+ gas over a compound boolean condition.\n if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))\n if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();\n }\n\n _beforeTokenTransfers(from, address(0), tokenId, 1);\n\n // Clear approvals from the previous owner.\n assembly {\n if approvedAddress {\n // This is equivalent to `delete _tokenApprovals[tokenId]`.\n sstore(approvedAddressSlot, 0)\n }\n }\n\n // Underflow of the sender's balance is impossible because we check for\n // ownership above and the recipient's balance can't realistically overflow.\n // Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.\n unchecked {\n // Updates:\n // - `balance -= 1`.\n // - `numberBurned += 1`.\n //\n // We can directly decrement the balance, and increment the number burned.\n // This is equivalent to `packed -= 1; packed += 1 << _BITPOS_NUMBER_BURNED;`.\n ERC721AStorage.layout()._packedAddressData[from] += (1 << _BITPOS_NUMBER_BURNED) - 1;\n\n // Updates:\n // - `address` to the last owner.\n // - `startTimestamp` to the timestamp of burning.\n // - `burned` to `true`.\n // - `nextInitialized` to `true`.\n ERC721AStorage.layout()._packedOwnerships[tokenId] = _packOwnershipData(\n from,\n (_BITMASK_BURNED | _BITMASK_NEXT_INITIALIZED) | _nextExtraData(from, address(0), prevOwnershipPacked)\n );\n\n // If the next slot may not have been initialized (i.e. `nextInitialized == false`) .\n if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {\n uint256 nextTokenId = tokenId + 1;\n // If the next slot's address is zero and not burned (i.e. packed value is zero).\n if (ERC721AStorage.layout()._packedOwnerships[nextTokenId] == 0) {\n // If the next slot is within bounds.\n if (nextTokenId != ERC721AStorage.layout()._currentIndex) {\n // Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.\n ERC721AStorage.layout()._packedOwnerships[nextTokenId] = prevOwnershipPacked;\n }\n }\n }\n }\n\n emit Transfer(from, address(0), tokenId);\n _afterTokenTransfers(from, address(0), tokenId, 1);\n\n // Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.\n unchecked {\n ERC721AStorage.layout()._burnCounter++;\n }\n }\n\n // =============================================================\n // EXTRA DATA OPERATIONS\n // =============================================================\n\n /**\n * @dev Directly sets the extra data for the ownership data `index`.\n */\n function _setExtraDataAt(uint256 index, uint24 extraData) internal virtual {\n uint256 packed = ERC721AStorage.layout()._packedOwnerships[index];\n if (packed == 0) revert OwnershipNotInitializedForExtraData();\n uint256 extraDataCasted;\n // Cast `extraData` with assembly to avoid redundant masking.\n assembly {\n extraDataCasted := extraData\n }\n packed = (packed & _BITMASK_EXTRA_DATA_COMPLEMENT) | (extraDataCasted << _BITPOS_EXTRA_DATA);\n ERC721AStorage.layout()._packedOwnerships[index] = packed;\n }\n\n /**\n * @dev Called during each token transfer to set the 24bit `extraData` field.\n * Intended to be overridden by the cosumer contract.\n *\n * `previousExtraData` - the value of `extraData` before transfer.\n *\n * Calling conditions:\n *\n * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be\n * transferred to `to`.\n * - When `from` is zero, `tokenId` will be minted for `to`.\n * - When `to` is zero, `tokenId` will be burned by `from`.\n * - `from` and `to` are never both zero.\n */\n function _extraData(\n address from,\n address to,\n uint24 previousExtraData\n ) internal view virtual returns (uint24) {}\n\n /**\n * @dev Returns the next extra data for the packed ownership data.\n * The returned result is shifted into position.\n */\n function _nextExtraData(\n address from,\n address to,\n uint256 prevOwnershipPacked\n ) private view returns (uint256) {\n uint24 extraData = uint24(prevOwnershipPacked >> _BITPOS_EXTRA_DATA);\n return uint256(_extraData(from, to, extraData)) << _BITPOS_EXTRA_DATA;\n }\n\n // =============================================================\n // OTHER OPERATIONS\n // =============================================================\n\n /**\n * @dev Returns the message sender (defaults to `msg.sender`).\n *\n * If you are writing GSN compatible contracts, you need to override this function.\n */\n function _msgSenderERC721A() internal view virtual returns (address) {\n return msg.sender;\n }\n\n /**\n * @dev Converts a uint256 to its ASCII string decimal representation.\n */\n function _toString(uint256 value) internal pure virtual returns (string memory ptr) {\n assembly {\n // The maximum value of a uint256 contains 78 digits (1 byte per digit),\n // but we allocate 128 bytes to keep the free memory pointer 32-byte word aliged.\n // We will need 1 32-byte word to store the length,\n // and 3 32-byte words to store a maximum of 78 digits. Total: 32 + 3 * 32 = 128.\n ptr := add(mload(0x40), 128)\n // Update the free memory pointer to allocate.\n mstore(0x40, ptr)\n\n // Cache the end of the memory to calculate the length later.\n let end := ptr\n\n // We write the string from the rightmost digit to the leftmost digit.\n // The following is essentially a do-while loop that also handles the zero case.\n // Costs a bit more than early returning for the zero case,\n // but cheaper in terms of deployment and overall runtime costs.\n for {\n // Initialize and perform the first pass without check.\n let temp := value\n // Move the pointer 1 byte leftwards to point to an empty character slot.\n ptr := sub(ptr, 1)\n // Write the character to the pointer.\n // The ASCII index of the '0' character is 48.\n mstore8(ptr, add(48, mod(temp, 10)))\n temp := div(temp, 10)\n } temp {\n // Keep dividing `temp` until zero.\n temp := div(temp, 10)\n } {\n // Body of the for loop.\n ptr := sub(ptr, 1)\n mstore8(ptr, add(48, mod(temp, 10)))\n }\n\n let length := sub(end, ptr)\n // Move the pointer 32 bytes leftwards to make room for the length.\n ptr := sub(ptr, 32)\n // Store the length.\n mstore(ptr, length)\n }\n }\n}\n" }, "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../utils/ContextUpgradeable.sol\";\nimport \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * By default, the owner account will be the one that deploys the contract. This\n * can later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {\n address private _owner;\n\n event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n /**\n * @dev Initializes the contract setting the deployer as the initial owner.\n */\n function __Ownable_init() internal onlyInitializing {\n __Ownable_init_unchained();\n }\n\n function __Ownable_init_unchained() internal onlyInitializing {\n _transferOwnership(_msgSender());\n }\n\n /**\n * @dev Throws if called by any account other than the owner.\n */\n modifier onlyOwner() {\n _checkOwner();\n _;\n }\n\n /**\n * @dev Returns the address of the current owner.\n */\n function owner() public view virtual returns (address) {\n return _owner;\n }\n\n /**\n * @dev Throws if the sender is not the owner.\n */\n function _checkOwner() internal view virtual {\n require(owner() == _msgSender(), \"Ownable: caller is not the owner\");\n }\n\n /**\n * @dev Leaves the contract without owner. It will not be possible to call\n * `onlyOwner` functions anymore. Can only be called by the current owner.\n *\n * NOTE: Renouncing ownership will leave the contract without an owner,\n * thereby removing any functionality that is only available to the owner.\n */\n function renounceOwnership() public virtual onlyOwner {\n _transferOwnership(address(0));\n }\n\n /**\n * @dev Transfers ownership of the contract to a new account (`newOwner`).\n * Can only be called by the current owner.\n */\n function transferOwnership(address newOwner) public virtual onlyOwner {\n require(newOwner != address(0), \"Ownable: new owner is the zero address\");\n _transferOwnership(newOwner);\n }\n\n /**\n * @dev Transfers ownership of the contract to a new account (`newOwner`).\n * Internal function without access restriction.\n */\n function _transferOwnership(address newOwner) internal virtual {\n address oldOwner = _owner;\n _owner = newOwner;\n emit OwnershipTransferred(oldOwner, newOwner);\n }\n\n /**\n * @dev This empty reserved space is put in place to allow future versions to add new\n * variables without shifting down storage in the inheritance chain.\n * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n */\n uint256[49] private __gap;\n}\n" }, "erc721a-upgradeable/contracts/IERC721AUpgradeable.sol": { "content": "// SPDX-License-Identifier: MIT\n// ERC721A Contracts v4.2.0\n// Creator: Chiru Labs\n\npragma solidity ^0.8.4;\n\n/**\n * @dev Interface of ERC721A.\n */\ninterface IERC721AUpgradeable {\n /**\n * The caller must own the token or be an approved operator.\n */\n error ApprovalCallerNotOwnerNorApproved();\n\n /**\n * The token does not exist.\n */\n error ApprovalQueryForNonexistentToken();\n\n /**\n * The caller cannot approve to their own address.\n */\n error ApproveToCaller();\n\n /**\n * Cannot query the balance for the zero address.\n */\n error BalanceQueryForZeroAddress();\n\n /**\n * Cannot mint to the zero address.\n */\n error MintToZeroAddress();\n\n /**\n * The quantity of tokens minted must be more than zero.\n */\n error MintZeroQuantity();\n\n /**\n * The token does not exist.\n */\n error OwnerQueryForNonexistentToken();\n\n /**\n * The caller must own the token or be an approved operator.\n */\n error TransferCallerNotOwnerNorApproved();\n\n /**\n * The token must be owned by `from`.\n */\n error TransferFromIncorrectOwner();\n\n /**\n * Cannot safely transfer to a contract that does not implement the\n * ERC721Receiver interface.\n */\n error TransferToNonERC721ReceiverImplementer();\n\n /**\n * Cannot transfer to the zero address.\n */\n error TransferToZeroAddress();\n\n /**\n * The token does not exist.\n */\n error URIQueryForNonexistentToken();\n\n /**\n * The `quantity` minted with ERC2309 exceeds the safety limit.\n */\n error MintERC2309QuantityExceedsLimit();\n\n /**\n * The `extraData` cannot be set on an unintialized ownership slot.\n */\n error OwnershipNotInitializedForExtraData();\n\n // =============================================================\n // STRUCTS\n // =============================================================\n\n struct TokenOwnership {\n // The address of the owner.\n address addr;\n // Stores the start time of ownership with minimal overhead for tokenomics.\n uint64 startTimestamp;\n // Whether the token has been burned.\n bool burned;\n // Arbitrary data similar to `startTimestamp` that can be set via {_extraData}.\n uint24 extraData;\n }\n\n // =============================================================\n // TOKEN COUNTERS\n // =============================================================\n\n /**\n * @dev Returns the total number of tokens in existence.\n * Burned tokens will reduce the count.\n * To get the total number of tokens minted, please see {_totalMinted}.\n */\n function totalSupply() external view returns (uint256);\n\n // =============================================================\n // IERC165\n // =============================================================\n\n /**\n * @dev Returns true if this contract implements the interface defined by\n * `interfaceId`. See the corresponding\n * [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)\n * to learn more about how these ids are created.\n *\n * This function call must use less than 30000 gas.\n */\n function supportsInterface(bytes4 interfaceId) external view returns (bool);\n\n // =============================================================\n // IERC721\n // =============================================================\n\n /**\n * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n */\n event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n /**\n * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n */\n event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n /**\n * @dev Emitted when `owner` enables or disables\n * (`approved`) `operator` to manage all of its assets.\n */\n event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n /**\n * @dev Returns the number of tokens in `owner`'s account.\n */\n function balanceOf(address owner) external view returns (uint256 balance);\n\n /**\n * @dev Returns the owner of the `tokenId` token.\n *\n * Requirements:\n *\n * - `tokenId` must exist.\n */\n function ownerOf(uint256 tokenId) external view returns (address owner);\n\n /**\n * @dev Safely transfers `tokenId` token from `from` to `to`,\n * checking first that contract recipients are aware of the ERC721 protocol\n * to prevent tokens from being forever locked.\n *\n * Requirements:\n *\n * - `from` cannot be the zero address.\n * - `to` cannot be the zero address.\n * - `tokenId` token must exist and be owned by `from`.\n * - If the caller is not `from`, it must be have been allowed to move\n * this token by either {approve} or {setApprovalForAll}.\n * - If `to` refers to a smart contract, it must implement\n * {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n *\n * Emits a {Transfer} event.\n */\n function safeTransferFrom(\n address from,\n address to,\n uint256 tokenId,\n bytes calldata data\n ) external;\n\n /**\n * @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.\n */\n function safeTransferFrom(\n address from,\n address to,\n uint256 tokenId\n ) external;\n\n /**\n * @dev Transfers `tokenId` from `from` to `to`.\n *\n * WARNING: Usage of this method is discouraged, use {safeTransferFrom}\n * whenever possible.\n *\n * Requirements:\n *\n * - `from` cannot be the zero address.\n * - `to` cannot be the zero address.\n * - `tokenId` token must be owned by `from`.\n * - If the caller is not `from`, it must be approved to move this token\n * by either {approve} or {setApprovalForAll}.\n *\n * Emits a {Transfer} event.\n */\n function transferFrom(\n address from,\n address to,\n uint256 tokenId\n ) external;\n\n /**\n * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n * The approval is cleared when the token is transferred.\n *\n * Only a single account can be approved at a time, so approving the\n * zero address clears previous approvals.\n *\n * Requirements:\n *\n * - The caller must own the token or be an approved operator.\n * - `tokenId` must exist.\n *\n * Emits an {Approval} event.\n */\n function approve(address to, uint256 tokenId) external;\n\n /**\n * @dev Approve or remove `operator` as an operator for the caller.\n * Operators can call {transferFrom} or {safeTransferFrom}\n * for any token owned by the caller.\n *\n * Requirements:\n *\n * - The `operator` cannot be the caller.\n *\n * Emits an {ApprovalForAll} event.\n */\n function setApprovalForAll(address operator, bool _approved) external;\n\n /**\n * @dev Returns the account approved for `tokenId` token.\n *\n * Requirements:\n *\n * - `tokenId` must exist.\n */\n function getApproved(uint256 tokenId) external view returns (address operator);\n\n /**\n * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n *\n * See {setApprovalForAll}.\n */\n function isApprovedForAll(address owner, address operator) external view returns (bool);\n\n // =============================================================\n // IERC721Metadata\n // =============================================================\n\n /**\n * @dev Returns the token collection name.\n */\n function name() external view returns (string memory);\n\n /**\n * @dev Returns the token collection symbol.\n */\n function symbol() external view returns (string memory);\n\n /**\n * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n */\n function tokenURI(uint256 tokenId) external view returns (string memory);\n\n // =============================================================\n // IERC2309\n // =============================================================\n\n /**\n * @dev Emitted when tokens in `fromTokenId` to `toTokenId`\n * (inclusive) is transferred from `from` to `to`, as defined in the\n * [ERC2309](https://eips.ethereum.org/EIPS/eip-2309) standard.\n *\n * See {_mintERC2309} for more details.\n */\n event ConsecutiveTransfer(uint256 indexed fromTokenId, uint256 toTokenId, address indexed from, address indexed to);\n}\n" }, "erc721a-upgradeable/contracts/ERC721AStorage.sol": { "content": "// SPDX-License-Identifier: MIT\n\npragma solidity ^0.8.0;\n\nimport {ERC721AUpgradeable} from './ERC721AUpgradeable.sol';\n\nlibrary ERC721AStorage {\n struct Layout {\n // =============================================================\n // STORAGE\n // =============================================================\n\n // The next token ID to be minted.\n uint256 _currentIndex;\n // The number of tokens burned.\n uint256 _burnCounter;\n // Token name\n string _name;\n // Token symbol\n string _symbol;\n // Mapping from token ID to ownership details\n // An empty struct value does not necessarily mean the token is unowned.\n // See {_packedOwnershipOf} implementation for details.\n //\n // Bits Layout:\n // - [0..159] `addr`\n // - [160..223] `startTimestamp`\n // - [224] `burned`\n // - [225] `nextInitialized`\n // - [232..255] `extraData`\n mapping(uint256 => uint256) _packedOwnerships;\n // Mapping owner address to address data.\n //\n // Bits Layout:\n // - [0..63] `balance`\n // - [64..127] `numberMinted`\n // - [128..191] `numberBurned`\n // - [192..255] `aux`\n mapping(address => uint256) _packedAddressData;\n // Mapping from token ID to approved address.\n mapping(uint256 => ERC721AUpgradeable.TokenApprovalRef) _tokenApprovals;\n // Mapping from owner to operator approvals\n mapping(address => mapping(address => bool)) _operatorApprovals;\n }\n\n bytes32 internal constant STORAGE_SLOT = keccak256('ERC721A.contracts.storage.ERC721A');\n\n function layout() internal pure returns (Layout storage l) {\n bytes32 slot = STORAGE_SLOT;\n assembly {\n l.slot := slot\n }\n }\n}\n" }, "erc721a-upgradeable/contracts/ERC721A__Initializable.sol": { "content": "// SPDX-License-Identifier: MIT\npragma solidity ^0.8.0;\n\n/**\n * @dev This is a base contract to aid in writing upgradeable diamond facet contracts, or any kind of contract that will be deployed\n * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an\n * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer\n * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.\n *\n * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as\n * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.\n *\n * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure\n * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.\n */\n\nimport {ERC721A__InitializableStorage} from './ERC721A__InitializableStorage.sol';\n\nabstract contract ERC721A__Initializable {\n using ERC721A__InitializableStorage for ERC721A__InitializableStorage.Layout;\n\n /**\n * @dev Modifier to protect an initializer function from being invoked twice.\n */\n modifier initializerERC721A() {\n // If the contract is initializing we ignore whether _initialized is set in order to support multiple\n // inheritance patterns, but we only do this in the context of a constructor, because in other contexts the\n // contract may have been reentered.\n require(\n ERC721A__InitializableStorage.layout()._initializing\n ? _isConstructor()\n : !ERC721A__InitializableStorage.layout()._initialized,\n 'ERC721A__Initializable: contract is already initialized'\n );\n\n bool isTopLevelCall = !ERC721A__InitializableStorage.layout()._initializing;\n if (isTopLevelCall) {\n ERC721A__InitializableStorage.layout()._initializing = true;\n ERC721A__InitializableStorage.layout()._initialized = true;\n }\n\n _;\n\n if (isTopLevelCall) {\n ERC721A__InitializableStorage.layout()._initializing = false;\n }\n }\n\n /**\n * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the\n * {initializer} modifier, directly or indirectly.\n */\n modifier onlyInitializingERC721A() {\n require(\n ERC721A__InitializableStorage.layout()._initializing,\n 'ERC721A__Initializable: contract is not initializing'\n );\n _;\n }\n\n /// @dev Returns true if and only if the function is running in the constructor\n function _isConstructor() private view returns (bool) {\n // extcodesize checks the size of the code stored in an address, and\n // address returns the current address. Since the code is still not\n // deployed when running a constructor, any checks on its code size will\n // yield zero, making it an effective way to detect if a contract is\n // under construction or not.\n address self = address(this);\n uint256 cs;\n assembly {\n cs := extcodesize(self)\n }\n return cs == 0;\n }\n}\n" }, "erc721a-upgradeable/contracts/ERC721A__InitializableStorage.sol": { "content": "// SPDX-License-Identifier: MIT\n\npragma solidity ^0.8.0;\n\n/**\n * @dev This is a base storage for the initialization function for upgradeable diamond facet contracts\n **/\n\nlibrary ERC721A__InitializableStorage {\n struct Layout {\n /*\n * Indicates that the contract has been initialized.\n */\n bool _initialized;\n /*\n * Indicates that the contract is in the process of being initialized.\n */\n bool _initializing;\n }\n\n bytes32 internal constant STORAGE_SLOT = keccak256('ERC721A.contracts.storage.initializable.facet');\n\n function layout() internal pure returns (Layout storage l) {\n bytes32 slot = STORAGE_SLOT;\n assembly {\n l.slot := slot\n }\n }\n}\n" }, "@openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)\n\npragma solidity ^0.8.0;\nimport \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract ContextUpgradeable is Initializable {\n function __Context_init() internal onlyInitializing {\n }\n\n function __Context_init_unchained() internal onlyInitializing {\n }\n function _msgSender() internal view virtual returns (address) {\n return msg.sender;\n }\n\n function _msgData() internal view virtual returns (bytes calldata) {\n return msg.data;\n }\n\n /**\n * @dev This empty reserved space is put in place to allow future versions to add new\n * variables without shifting down storage in the inheritance chain.\n * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n */\n uint256[50] private __gap;\n}\n" }, "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (proxy/utils/Initializable.sol)\n\npragma solidity ^0.8.2;\n\nimport \"../../utils/AddressUpgradeable.sol\";\n\n/**\n * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed\n * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an\n * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer\n * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.\n *\n * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be\n * reused. This mechanism prevents re-execution of each \"step\" but allows the creation of new initialization steps in\n * case an upgrade adds a module that needs to be initialized.\n *\n * For example:\n *\n * [.hljs-theme-light.nopadding]\n * ```\n * contract MyToken is ERC20Upgradeable {\n * function initialize() initializer public {\n * __ERC20_init(\"MyToken\", \"MTK\");\n * }\n * }\n * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {\n * function initializeV2() reinitializer(2) public {\n * __ERC20Permit_init(\"MyToken\");\n * }\n * }\n * ```\n *\n * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as\n * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.\n *\n * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure\n * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.\n *\n * [CAUTION]\n * ====\n * Avoid leaving a contract uninitialized.\n *\n * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation\n * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke\n * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:\n *\n * [.hljs-theme-light.nopadding]\n * ```\n * /// @custom:oz-upgrades-unsafe-allow constructor\n * constructor() {\n * _disableInitializers();\n * }\n * ```\n * ====\n */\nabstract contract Initializable {\n /**\n * @dev Indicates that the contract has been initialized.\n * @custom:oz-retyped-from bool\n */\n uint8 private _initialized;\n\n /**\n * @dev Indicates that the contract is in the process of being initialized.\n */\n bool private _initializing;\n\n /**\n * @dev Triggered when the contract has been initialized or reinitialized.\n */\n event Initialized(uint8 version);\n\n /**\n * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,\n * `onlyInitializing` functions can be used to initialize parent contracts. Equivalent to `reinitializer(1)`.\n */\n modifier initializer() {\n bool isTopLevelCall = !_initializing;\n require(\n (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),\n \"Initializable: contract is already initialized\"\n );\n _initialized = 1;\n if (isTopLevelCall) {\n _initializing = true;\n }\n _;\n if (isTopLevelCall) {\n _initializing = false;\n emit Initialized(1);\n }\n }\n\n /**\n * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the\n * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be\n * used to initialize parent contracts.\n *\n * `initializer` is equivalent to `reinitializer(1)`, so a reinitializer may be used after the original\n * initialization step. This is essential to configure modules that are added through upgrades and that require\n * initialization.\n *\n * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in\n * a contract, executing them in the right order is up to the developer or operator.\n */\n modifier reinitializer(uint8 version) {\n require(!_initializing && _initialized < version, \"Initializable: contract is already initialized\");\n _initialized = version;\n _initializing = true;\n _;\n _initializing = false;\n emit Initialized(version);\n }\n\n /**\n * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the\n * {initializer} and {reinitializer} modifiers, directly or indirectly.\n */\n modifier onlyInitializing() {\n require(_initializing, \"Initializable: contract is not initializing\");\n _;\n }\n\n /**\n * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.\n * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized\n * to any version. It is recommended to use this to lock implementation contracts that are designed to be called\n * through proxies.\n */\n function _disableInitializers() internal virtual {\n require(!_initializing, \"Initializable: contract is initializing\");\n if (_initialized < type(uint8).max) {\n _initialized = type(uint8).max;\n emit Initialized(type(uint8).max);\n }\n }\n}\n" }, "@openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)\n\npragma solidity ^0.8.1;\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary AddressUpgradeable {\n /**\n * @dev Returns true if `account` is a contract.\n *\n * [IMPORTANT]\n * ====\n * It is unsafe to assume that an address for which this function returns\n * false is an externally-owned account (EOA) and not a contract.\n *\n * Among others, `isContract` will return false for the following\n * types of addresses:\n *\n * - an externally-owned account\n * - a contract in construction\n * - an address where a contract will be created\n * - an address where a contract lived, but was destroyed\n * ====\n *\n * [IMPORTANT]\n * ====\n * You shouldn't rely on `isContract` to protect against flash loan attacks!\n *\n * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets\n * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract\n * constructor.\n * ====\n */\n function isContract(address account) internal view returns (bool) {\n // This method relies on extcodesize/address.code.length, which returns 0\n // for contracts in construction, since the code is only stored at the end\n // of the constructor execution.\n\n return account.code.length > 0;\n }\n\n /**\n * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n * `recipient`, forwarding all available gas and reverting on errors.\n *\n * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n * of certain opcodes, possibly making contracts go over the 2300 gas limit\n * imposed by `transfer`, making them unable to receive funds via\n * `transfer`. {sendValue} removes this limitation.\n *\n * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n *\n * IMPORTANT: because control is transferred to `recipient`, care must be\n * taken to not create reentrancy vulnerabilities. Consider using\n * {ReentrancyGuard} or the\n * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n */\n function sendValue(address payable recipient, uint256 amount) internal {\n require(address(this).balance >= amount, \"Address: insufficient balance\");\n\n (bool success, ) = recipient.call{value: amount}(\"\");\n require(success, \"Address: unable to send value, recipient may have reverted\");\n }\n\n /**\n * @dev Performs a Solidity function call using a low level `call`. A\n * plain `call` is an unsafe replacement for a function call: use this\n * function instead.\n *\n * If `target` reverts with a revert reason, it is bubbled up by this\n * function (like regular Solidity function calls).\n *\n * Returns the raw returned data. To convert to the expected return value,\n * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n *\n * Requirements:\n *\n * - `target` must be a contract.\n * - calling `target` with `data` must not revert.\n *\n * _Available since v3.1._\n */\n function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n return functionCall(target, data, \"Address: low-level call failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with\n * `errorMessage` as a fallback revert reason when `target` reverts.\n *\n * _Available since v3.1._\n */\n function functionCall(\n address target,\n bytes memory data,\n string memory errorMessage\n ) internal returns (bytes memory) {\n return functionCallWithValue(target, data, 0, errorMessage);\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but also transferring `value` wei to `target`.\n *\n * Requirements:\n *\n * - the calling contract must have an ETH balance of at least `value`.\n * - the called Solidity function must be `payable`.\n *\n * _Available since v3.1._\n */\n function functionCallWithValue(\n address target,\n bytes memory data,\n uint256 value\n ) internal returns (bytes memory) {\n return functionCallWithValue(target, data, value, \"Address: low-level call with value failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but\n * with `errorMessage` as a fallback revert reason when `target` reverts.\n *\n * _Available since v3.1._\n */\n function functionCallWithValue(\n address target,\n bytes memory data,\n uint256 value,\n string memory errorMessage\n ) internal returns (bytes memory) {\n require(address(this).balance >= value, \"Address: insufficient balance for call\");\n require(isContract(target), \"Address: call to non-contract\");\n\n (bool success, bytes memory returndata) = target.call{value: value}(data);\n return verifyCallResult(success, returndata, errorMessage);\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but performing a static call.\n *\n * _Available since v3.3._\n */\n function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n return functionStaticCall(target, data, \"Address: low-level static call failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n * but performing a static call.\n *\n * _Available since v3.3._\n */\n function functionStaticCall(\n address target,\n bytes memory data,\n string memory errorMessage\n ) internal view returns (bytes memory) {\n require(isContract(target), \"Address: static call to non-contract\");\n\n (bool success, bytes memory returndata) = target.staticcall(data);\n return verifyCallResult(success, returndata, errorMessage);\n }\n\n /**\n * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the\n * revert reason using the provided one.\n *\n * _Available since v4.3._\n */\n function verifyCallResult(\n bool success,\n bytes memory returndata,\n string memory errorMessage\n ) internal pure returns (bytes memory) {\n if (success) {\n return returndata;\n } else {\n // Look for revert reason and bubble it up if present\n if (returndata.length > 0) {\n // The easiest way to bubble the revert reason is using memory via assembly\n /// @solidity memory-safe-assembly\n assembly {\n let returndata_size := mload(returndata)\n revert(add(32, returndata), returndata_size)\n }\n } else {\n revert(errorMessage);\n }\n }\n }\n}\n" } }, "settings": { "optimizer": { "enabled": true, "runs": 200 }, "outputSelection": { "*": { "*": [ "evm.bytecode", "evm.deployedBytecode", "devdoc", "userdoc", "metadata", "abi" ] } }, "libraries": {} } }