{ "language": "Solidity", "sources": { "contracts/core/controller/proxyWallet.sol": { "content": "// SPDX-License-Identifier: GPL-3.0-or-later\n\npragma solidity >=0.8.0 <0.9.0;\n\nimport \"@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol\";\nimport \"@openzeppelin/contracts/proxy/transparent/TransparentUpgradeableProxy.sol\";\nimport \"@openzeppelin/contracts/proxy/transparent/ProxyAdmin.sol\";\nimport \"@openzeppelin/contracts/proxy/Clones.sol\";\nimport \"../../timelock/TimelockCallable.sol\";\nimport \"../../common/Basic.sol\";\nimport \"./IControllerLink.sol\";\n\ninterface IControllerLibSub {\n function initialize(\n address _adapterManager,\n address _autoExecutor,\n bytes memory data\n ) external;\n}\n\ncontract ProxyWallet is TransparentUpgradeableProxy {\n event Received(address addr, uint256 amount);\n\n constructor(\n address _logic,\n address _admin,\n bytes memory _data\n ) payable TransparentUpgradeableProxy(_logic, _admin, _data) {}\n\n function getProxyAdmin() external view returns (address) {\n return _getAdmin();\n }\n\n receive() external payable override {\n emit Received(msg.sender, msg.value);\n }\n}\n\ncontract WalletFactory is TimelockCallable, Basic {\n address public immutable userDatabase;\n bytes32 public immutable trustProxyAdminCodeHash; //proxyAdmin for ControllerLib\n address public trustAccountLogic; //ControllerLib\n address public trustSubAccountLogic; //ControllerLibSub\n\n event updateTrustLogic(\n address _trustAccountLogic,\n address _trustSubAccountLogic\n );\n\n event mainAccountCreate(address _userAddress, address _newAccount);\n event subAccountCreate(address _mainAccount, address _newSubAccount);\n\n constructor(\n address _userDatabase,\n address _trustAccountLogic,\n address _trustSubAccountLogic,\n address _timelock,\n bytes32 _trustProxyAdminCodeHash\n ) TimelockCallable(_timelock) {\n userDatabase = _userDatabase;\n trustAccountLogic = _trustAccountLogic;\n trustSubAccountLogic = _trustSubAccountLogic;\n trustProxyAdminCodeHash = _trustProxyAdminCodeHash;\n }\n\n function setTrustLogic(\n address _trustAccountLogic,\n address _trustSubAccountLogic\n ) external onlyTimelock {\n trustAccountLogic = _trustAccountLogic;\n trustSubAccountLogic = _trustSubAccountLogic;\n\n emit updateTrustLogic(trustAccountLogic, trustSubAccountLogic);\n }\n\n function proxyAdminCheck(address defaultProxyAdmin)\n internal\n returns (address)\n {\n if (defaultProxyAdmin == address(0)) {\n ProxyAdmin newProxyAdmin = new ProxyAdmin();\n address newProxyAdminAddr = address(newProxyAdmin);\n Ownable(newProxyAdminAddr).transferOwnership(msg.sender);\n return newProxyAdminAddr;\n }\n bytes32 codeHash;\n assembly {\n codeHash := extcodehash(defaultProxyAdmin)\n }\n require(\n Ownable(defaultProxyAdmin).owner() == msg.sender &&\n codeHash == trustProxyAdminCodeHash,\n \"!trustProxyAdmin\"\n );\n return defaultProxyAdmin;\n }\n\n function upgradableWalletCreate(\n address _logic,\n address _admin,\n bytes memory _data\n ) internal returns (address) {\n ProxyWallet newAccount = new ProxyWallet(_logic, _admin, _data);\n address newAccountAddr = address(newAccount);\n OwnableUpgradeable(newAccountAddr).transferOwnership(msg.sender);\n IControllerLink(userDatabase).addAuth(msg.sender, newAccountAddr);\n\n emit mainAccountCreate(msg.sender, newAccountAddr);\n return newAccountAddr;\n }\n\n function createAccount(address _admin, bytes memory _data)\n external\n payable\n returns (address proxyAdmin, address newAccount)\n {\n proxyAdmin = proxyAdminCheck(_admin);\n newAccount = upgradableWalletCreate(\n trustAccountLogic,\n proxyAdmin,\n _data\n );\n safeTransferETH(newAccount, msg.value);\n }\n\n function createSubAccount(\n address _adapterManager,\n address _autoExecutor,\n bytes memory _data\n ) external payable returns (address newAccount) {\n require(\n IControllerLink(userDatabase).existing(msg.sender) == true,\n \"!cianUser\"\n );\n newAccount = Clones.clone(trustSubAccountLogic);\n IControllerLibSub(newAccount).initialize(\n _adapterManager,\n _autoExecutor,\n _data\n );\n Ownable(newAccount).transferOwnership(msg.sender);\n IControllerLink(userDatabase).addAuth(msg.sender, newAccount);\n safeTransferETH(newAccount, msg.value);\n\n emit subAccountCreate(msg.sender, address(newAccount));\n }\n}\n" }, "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../utils/ContextUpgradeable.sol\";\nimport \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * By default, the owner account will be the one that deploys the contract. This\n * can later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {\n address private _owner;\n\n event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n /**\n * @dev Initializes the contract setting the deployer as the initial owner.\n */\n function __Ownable_init() internal onlyInitializing {\n __Ownable_init_unchained();\n }\n\n function __Ownable_init_unchained() internal onlyInitializing {\n _transferOwnership(_msgSender());\n }\n\n /**\n * @dev Throws if called by any account other than the owner.\n */\n modifier onlyOwner() {\n _checkOwner();\n _;\n }\n\n /**\n * @dev Returns the address of the current owner.\n */\n function owner() public view virtual returns (address) {\n return _owner;\n }\n\n /**\n * @dev Throws if the sender is not the owner.\n */\n function _checkOwner() internal view virtual {\n require(owner() == _msgSender(), \"Ownable: caller is not the owner\");\n }\n\n /**\n * @dev Leaves the contract without owner. It will not be possible to call\n * `onlyOwner` functions anymore. Can only be called by the current owner.\n *\n * NOTE: Renouncing ownership will leave the contract without an owner,\n * thereby removing any functionality that is only available to the owner.\n */\n function renounceOwnership() public virtual onlyOwner {\n _transferOwnership(address(0));\n }\n\n /**\n * @dev Transfers ownership of the contract to a new account (`newOwner`).\n * Can only be called by the current owner.\n */\n function transferOwnership(address newOwner) public virtual onlyOwner {\n require(newOwner != address(0), \"Ownable: new owner is the zero address\");\n _transferOwnership(newOwner);\n }\n\n /**\n * @dev Transfers ownership of the contract to a new account (`newOwner`).\n * Internal function without access restriction.\n */\n function _transferOwnership(address newOwner) internal virtual {\n address oldOwner = _owner;\n _owner = newOwner;\n emit OwnershipTransferred(oldOwner, newOwner);\n }\n\n /**\n * @dev This empty reserved space is put in place to allow future versions to add new\n * variables without shifting down storage in the inheritance chain.\n * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n */\n uint256[49] private __gap;\n}\n" }, "@openzeppelin/contracts/proxy/transparent/TransparentUpgradeableProxy.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (proxy/transparent/TransparentUpgradeableProxy.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../ERC1967/ERC1967Proxy.sol\";\n\n/**\n * @dev This contract implements a proxy that is upgradeable by an admin.\n *\n * To avoid https://medium.com/nomic-labs-blog/malicious-backdoors-in-ethereum-proxies-62629adf3357[proxy selector\n * clashing], which can potentially be used in an attack, this contract uses the\n * https://blog.openzeppelin.com/the-transparent-proxy-pattern/[transparent proxy pattern]. This pattern implies two\n * things that go hand in hand:\n *\n * 1. If any account other than the admin calls the proxy, the call will be forwarded to the implementation, even if\n * that call matches one of the admin functions exposed by the proxy itself.\n * 2. If the admin calls the proxy, it can access the admin functions, but its calls will never be forwarded to the\n * implementation. If the admin tries to call a function on the implementation it will fail with an error that says\n * \"admin cannot fallback to proxy target\".\n *\n * These properties mean that the admin account can only be used for admin actions like upgrading the proxy or changing\n * the admin, so it's best if it's a dedicated account that is not used for anything else. This will avoid headaches due\n * to sudden errors when trying to call a function from the proxy implementation.\n *\n * Our recommendation is for the dedicated account to be an instance of the {ProxyAdmin} contract. If set up this way,\n * you should think of the `ProxyAdmin` instance as the real administrative interface of your proxy.\n */\ncontract TransparentUpgradeableProxy is ERC1967Proxy {\n /**\n * @dev Initializes an upgradeable proxy managed by `_admin`, backed by the implementation at `_logic`, and\n * optionally initialized with `_data` as explained in {ERC1967Proxy-constructor}.\n */\n constructor(\n address _logic,\n address admin_,\n bytes memory _data\n ) payable ERC1967Proxy(_logic, _data) {\n assert(_ADMIN_SLOT == bytes32(uint256(keccak256(\"eip1967.proxy.admin\")) - 1));\n _changeAdmin(admin_);\n }\n\n /**\n * @dev Modifier used internally that will delegate the call to the implementation unless the sender is the admin.\n */\n modifier ifAdmin() {\n if (msg.sender == _getAdmin()) {\n _;\n } else {\n _fallback();\n }\n }\n\n /**\n * @dev Returns the current admin.\n *\n * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyAdmin}.\n *\n * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the\n * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.\n * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`\n */\n function admin() external ifAdmin returns (address admin_) {\n admin_ = _getAdmin();\n }\n\n /**\n * @dev Returns the current implementation.\n *\n * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyImplementation}.\n *\n * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the\n * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.\n * `0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc`\n */\n function implementation() external ifAdmin returns (address implementation_) {\n implementation_ = _implementation();\n }\n\n /**\n * @dev Changes the admin of the proxy.\n *\n * Emits an {AdminChanged} event.\n *\n * NOTE: Only the admin can call this function. See {ProxyAdmin-changeProxyAdmin}.\n */\n function changeAdmin(address newAdmin) external virtual ifAdmin {\n _changeAdmin(newAdmin);\n }\n\n /**\n * @dev Upgrade the implementation of the proxy.\n *\n * NOTE: Only the admin can call this function. See {ProxyAdmin-upgrade}.\n */\n function upgradeTo(address newImplementation) external ifAdmin {\n _upgradeToAndCall(newImplementation, bytes(\"\"), false);\n }\n\n /**\n * @dev Upgrade the implementation of the proxy, and then call a function from the new implementation as specified\n * by `data`, which should be an encoded function call. This is useful to initialize new storage variables in the\n * proxied contract.\n *\n * NOTE: Only the admin can call this function. See {ProxyAdmin-upgradeAndCall}.\n */\n function upgradeToAndCall(address newImplementation, bytes calldata data) external payable ifAdmin {\n _upgradeToAndCall(newImplementation, data, true);\n }\n\n /**\n * @dev Returns the current admin.\n */\n function _admin() internal view virtual returns (address) {\n return _getAdmin();\n }\n\n /**\n * @dev Makes sure the admin cannot access the fallback function. See {Proxy-_beforeFallback}.\n */\n function _beforeFallback() internal virtual override {\n require(msg.sender != _getAdmin(), \"TransparentUpgradeableProxy: admin cannot fallback to proxy target\");\n super._beforeFallback();\n }\n}\n" }, "@openzeppelin/contracts/proxy/transparent/ProxyAdmin.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (proxy/transparent/ProxyAdmin.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./TransparentUpgradeableProxy.sol\";\nimport \"../../access/Ownable.sol\";\n\n/**\n * @dev This is an auxiliary contract meant to be assigned as the admin of a {TransparentUpgradeableProxy}. For an\n * explanation of why you would want to use this see the documentation for {TransparentUpgradeableProxy}.\n */\ncontract ProxyAdmin is Ownable {\n /**\n * @dev Returns the current implementation of `proxy`.\n *\n * Requirements:\n *\n * - This contract must be the admin of `proxy`.\n */\n function getProxyImplementation(TransparentUpgradeableProxy proxy) public view virtual returns (address) {\n // We need to manually run the static call since the getter cannot be flagged as view\n // bytes4(keccak256(\"implementation()\")) == 0x5c60da1b\n (bool success, bytes memory returndata) = address(proxy).staticcall(hex\"5c60da1b\");\n require(success);\n return abi.decode(returndata, (address));\n }\n\n /**\n * @dev Returns the current admin of `proxy`.\n *\n * Requirements:\n *\n * - This contract must be the admin of `proxy`.\n */\n function getProxyAdmin(TransparentUpgradeableProxy proxy) public view virtual returns (address) {\n // We need to manually run the static call since the getter cannot be flagged as view\n // bytes4(keccak256(\"admin()\")) == 0xf851a440\n (bool success, bytes memory returndata) = address(proxy).staticcall(hex\"f851a440\");\n require(success);\n return abi.decode(returndata, (address));\n }\n\n /**\n * @dev Changes the admin of `proxy` to `newAdmin`.\n *\n * Requirements:\n *\n * - This contract must be the current admin of `proxy`.\n */\n function changeProxyAdmin(TransparentUpgradeableProxy proxy, address newAdmin) public virtual onlyOwner {\n proxy.changeAdmin(newAdmin);\n }\n\n /**\n * @dev Upgrades `proxy` to `implementation`. See {TransparentUpgradeableProxy-upgradeTo}.\n *\n * Requirements:\n *\n * - This contract must be the admin of `proxy`.\n */\n function upgrade(TransparentUpgradeableProxy proxy, address implementation) public virtual onlyOwner {\n proxy.upgradeTo(implementation);\n }\n\n /**\n * @dev Upgrades `proxy` to `implementation` and calls a function on the new implementation. See\n * {TransparentUpgradeableProxy-upgradeToAndCall}.\n *\n * Requirements:\n *\n * - This contract must be the admin of `proxy`.\n */\n function upgradeAndCall(\n TransparentUpgradeableProxy proxy,\n address implementation,\n bytes memory data\n ) public payable virtual onlyOwner {\n proxy.upgradeToAndCall{value: msg.value}(implementation, data);\n }\n}\n" }, "@openzeppelin/contracts/proxy/Clones.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (proxy/Clones.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev https://eips.ethereum.org/EIPS/eip-1167[EIP 1167] is a standard for\n * deploying minimal proxy contracts, also known as \"clones\".\n *\n * > To simply and cheaply clone contract functionality in an immutable way, this standard specifies\n * > a minimal bytecode implementation that delegates all calls to a known, fixed address.\n *\n * The library includes functions to deploy a proxy using either `create` (traditional deployment) or `create2`\n * (salted deterministic deployment). It also includes functions to predict the addresses of clones deployed using the\n * deterministic method.\n *\n * _Available since v3.4._\n */\nlibrary Clones {\n /**\n * @dev Deploys and returns the address of a clone that mimics the behaviour of `implementation`.\n *\n * This function uses the create opcode, which should never revert.\n */\n function clone(address implementation) internal returns (address instance) {\n assembly {\n let ptr := mload(0x40)\n mstore(ptr, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000)\n mstore(add(ptr, 0x14), shl(0x60, implementation))\n mstore(add(ptr, 0x28), 0x5af43d82803e903d91602b57fd5bf30000000000000000000000000000000000)\n instance := create(0, ptr, 0x37)\n }\n require(instance != address(0), \"ERC1167: create failed\");\n }\n\n /**\n * @dev Deploys and returns the address of a clone that mimics the behaviour of `implementation`.\n *\n * This function uses the create2 opcode and a `salt` to deterministically deploy\n * the clone. Using the same `implementation` and `salt` multiple time will revert, since\n * the clones cannot be deployed twice at the same address.\n */\n function cloneDeterministic(address implementation, bytes32 salt) internal returns (address instance) {\n assembly {\n let ptr := mload(0x40)\n mstore(ptr, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000)\n mstore(add(ptr, 0x14), shl(0x60, implementation))\n mstore(add(ptr, 0x28), 0x5af43d82803e903d91602b57fd5bf30000000000000000000000000000000000)\n instance := create2(0, ptr, 0x37, salt)\n }\n require(instance != address(0), \"ERC1167: create2 failed\");\n }\n\n /**\n * @dev Computes the address of a clone deployed using {Clones-cloneDeterministic}.\n */\n function predictDeterministicAddress(\n address implementation,\n bytes32 salt,\n address deployer\n ) internal pure returns (address predicted) {\n assembly {\n let ptr := mload(0x40)\n mstore(ptr, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000)\n mstore(add(ptr, 0x14), shl(0x60, implementation))\n mstore(add(ptr, 0x28), 0x5af43d82803e903d91602b57fd5bf3ff00000000000000000000000000000000)\n mstore(add(ptr, 0x38), shl(0x60, deployer))\n mstore(add(ptr, 0x4c), salt)\n mstore(add(ptr, 0x6c), keccak256(ptr, 0x37))\n predicted := keccak256(add(ptr, 0x37), 0x55)\n }\n }\n\n /**\n * @dev Computes the address of a clone deployed using {Clones-cloneDeterministic}.\n */\n function predictDeterministicAddress(address implementation, bytes32 salt)\n internal\n view\n returns (address predicted)\n {\n return predictDeterministicAddress(implementation, salt, address(this));\n }\n}\n" }, "contracts/timelock/TimelockCallable.sol": { "content": "// SPDX-License-Identifier: GPL-3.0-or-later\n\npragma solidity >=0.8.0 <0.9.0;\n\nabstract contract TimelockCallable {\n address public TIMELOCK_ADDRESS;\n\n event SetTimeLock(address newTimelock);\n\n constructor(address _timelock) {\n TIMELOCK_ADDRESS = _timelock;\n }\n\n modifier onlyTimelock() {\n require(TIMELOCK_ADDRESS == msg.sender, \"Caller is not the timelock.\");\n _;\n }\n\n function setTimelock(address newTimelock) external onlyTimelock {\n require(newTimelock != address(0));\n TIMELOCK_ADDRESS = newTimelock;\n emit SetTimeLock(newTimelock);\n }\n}\n" }, "contracts/common/Basic.sol": { "content": "// SPDX-License-Identifier: GPL-3.0-or-later\n\npragma solidity >=0.8.0 <0.9.0;\n\nimport \"@openzeppelin/contracts/token/ERC20/IERC20.sol\";\nimport \"@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol\";\n\nabstract contract Basic {\n using SafeERC20 for IERC20;\n /**\n * @dev Return ethereum address\n */\n address internal constant ethAddr =\n 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;\n\n /// @dev Return Wrapped ETH address\n address internal constant wethAddr =\n 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;\n\n function safeTransferETH(address to, uint256 value) internal {\n if (value != 0) {\n (bool success, ) = to.call{value: value}(new bytes(0));\n require(success, \"helper::safeTransferETH: ETH transfer failed\");\n }\n }\n}\n" }, "contracts/core/controller/IControllerLink.sol": { "content": "// SPDX-License-Identifier: GPL-3.0-or-later\n\npragma solidity >=0.8.0 <0.9.0;\n\ninterface IControllerLink {\n function addAuth(address _owner, address _account) external;\n\n function existing(address _account) external view returns (bool);\n}\n" }, "@openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)\n\npragma solidity ^0.8.0;\nimport \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract ContextUpgradeable is Initializable {\n function __Context_init() internal onlyInitializing {\n }\n\n function __Context_init_unchained() internal onlyInitializing {\n }\n function _msgSender() internal view virtual returns (address) {\n return msg.sender;\n }\n\n function _msgData() internal view virtual returns (bytes calldata) {\n return msg.data;\n }\n\n /**\n * @dev This empty reserved space is put in place to allow future versions to add new\n * variables without shifting down storage in the inheritance chain.\n * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n */\n uint256[50] private __gap;\n}\n" }, "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (proxy/utils/Initializable.sol)\n\npragma solidity ^0.8.2;\n\nimport \"../../utils/AddressUpgradeable.sol\";\n\n/**\n * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed\n * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an\n * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer\n * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.\n *\n * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be\n * reused. This mechanism prevents re-execution of each \"step\" but allows the creation of new initialization steps in\n * case an upgrade adds a module that needs to be initialized.\n *\n * For example:\n *\n * [.hljs-theme-light.nopadding]\n * ```\n * contract MyToken is ERC20Upgradeable {\n * function initialize() initializer public {\n * __ERC20_init(\"MyToken\", \"MTK\");\n * }\n * }\n * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {\n * function initializeV2() reinitializer(2) public {\n * __ERC20Permit_init(\"MyToken\");\n * }\n * }\n * ```\n *\n * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as\n * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.\n *\n * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure\n * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.\n *\n * [CAUTION]\n * ====\n * Avoid leaving a contract uninitialized.\n *\n * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation\n * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke\n * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:\n *\n * [.hljs-theme-light.nopadding]\n * ```\n * /// @custom:oz-upgrades-unsafe-allow constructor\n * constructor() {\n * _disableInitializers();\n * }\n * ```\n * ====\n */\nabstract contract Initializable {\n /**\n * @dev Indicates that the contract has been initialized.\n * @custom:oz-retyped-from bool\n */\n uint8 private _initialized;\n\n /**\n * @dev Indicates that the contract is in the process of being initialized.\n */\n bool private _initializing;\n\n /**\n * @dev Triggered when the contract has been initialized or reinitialized.\n */\n event Initialized(uint8 version);\n\n /**\n * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,\n * `onlyInitializing` functions can be used to initialize parent contracts. Equivalent to `reinitializer(1)`.\n */\n modifier initializer() {\n bool isTopLevelCall = !_initializing;\n require(\n (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),\n \"Initializable: contract is already initialized\"\n );\n _initialized = 1;\n if (isTopLevelCall) {\n _initializing = true;\n }\n _;\n if (isTopLevelCall) {\n _initializing = false;\n emit Initialized(1);\n }\n }\n\n /**\n * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the\n * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be\n * used to initialize parent contracts.\n *\n * `initializer` is equivalent to `reinitializer(1)`, so a reinitializer may be used after the original\n * initialization step. This is essential to configure modules that are added through upgrades and that require\n * initialization.\n *\n * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in\n * a contract, executing them in the right order is up to the developer or operator.\n */\n modifier reinitializer(uint8 version) {\n require(!_initializing && _initialized < version, \"Initializable: contract is already initialized\");\n _initialized = version;\n _initializing = true;\n _;\n _initializing = false;\n emit Initialized(version);\n }\n\n /**\n * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the\n * {initializer} and {reinitializer} modifiers, directly or indirectly.\n */\n modifier onlyInitializing() {\n require(_initializing, \"Initializable: contract is not initializing\");\n _;\n }\n\n /**\n * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.\n * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized\n * to any version. It is recommended to use this to lock implementation contracts that are designed to be called\n * through proxies.\n */\n function _disableInitializers() internal virtual {\n require(!_initializing, \"Initializable: contract is initializing\");\n if (_initialized < type(uint8).max) {\n _initialized = type(uint8).max;\n emit Initialized(type(uint8).max);\n }\n }\n}\n" }, "@openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)\n\npragma solidity ^0.8.1;\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary AddressUpgradeable {\n /**\n * @dev Returns true if `account` is a contract.\n *\n * [IMPORTANT]\n * ====\n * It is unsafe to assume that an address for which this function returns\n * false is an externally-owned account (EOA) and not a contract.\n *\n * Among others, `isContract` will return false for the following\n * types of addresses:\n *\n * - an externally-owned account\n * - a contract in construction\n * - an address where a contract will be created\n * - an address where a contract lived, but was destroyed\n * ====\n *\n * [IMPORTANT]\n * ====\n * You shouldn't rely on `isContract` to protect against flash loan attacks!\n *\n * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets\n * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract\n * constructor.\n * ====\n */\n function isContract(address account) internal view returns (bool) {\n // This method relies on extcodesize/address.code.length, which returns 0\n // for contracts in construction, since the code is only stored at the end\n // of the constructor execution.\n\n return account.code.length > 0;\n }\n\n /**\n * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n * `recipient`, forwarding all available gas and reverting on errors.\n *\n * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n * of certain opcodes, possibly making contracts go over the 2300 gas limit\n * imposed by `transfer`, making them unable to receive funds via\n * `transfer`. {sendValue} removes this limitation.\n *\n * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n *\n * IMPORTANT: because control is transferred to `recipient`, care must be\n * taken to not create reentrancy vulnerabilities. Consider using\n * {ReentrancyGuard} or the\n * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n */\n function sendValue(address payable recipient, uint256 amount) internal {\n require(address(this).balance >= amount, \"Address: insufficient balance\");\n\n (bool success, ) = recipient.call{value: amount}(\"\");\n require(success, \"Address: unable to send value, recipient may have reverted\");\n }\n\n /**\n * @dev Performs a Solidity function call using a low level `call`. A\n * plain `call` is an unsafe replacement for a function call: use this\n * function instead.\n *\n * If `target` reverts with a revert reason, it is bubbled up by this\n * function (like regular Solidity function calls).\n *\n * Returns the raw returned data. To convert to the expected return value,\n * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n *\n * Requirements:\n *\n * - `target` must be a contract.\n * - calling `target` with `data` must not revert.\n *\n * _Available since v3.1._\n */\n function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n return functionCall(target, data, \"Address: low-level call failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with\n * `errorMessage` as a fallback revert reason when `target` reverts.\n *\n * _Available since v3.1._\n */\n function functionCall(\n address target,\n bytes memory data,\n string memory errorMessage\n ) internal returns (bytes memory) {\n return functionCallWithValue(target, data, 0, errorMessage);\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but also transferring `value` wei to `target`.\n *\n * Requirements:\n *\n * - the calling contract must have an ETH balance of at least `value`.\n * - the called Solidity function must be `payable`.\n *\n * _Available since v3.1._\n */\n function functionCallWithValue(\n address target,\n bytes memory data,\n uint256 value\n ) internal returns (bytes memory) {\n return functionCallWithValue(target, data, value, \"Address: low-level call with value failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but\n * with `errorMessage` as a fallback revert reason when `target` reverts.\n *\n * _Available since v3.1._\n */\n function functionCallWithValue(\n address target,\n bytes memory data,\n uint256 value,\n string memory errorMessage\n ) internal returns (bytes memory) {\n require(address(this).balance >= value, \"Address: insufficient balance for call\");\n require(isContract(target), \"Address: call to non-contract\");\n\n (bool success, bytes memory returndata) = target.call{value: value}(data);\n return verifyCallResult(success, returndata, errorMessage);\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but performing a static call.\n *\n * _Available since v3.3._\n */\n function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n return functionStaticCall(target, data, \"Address: low-level static call failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n * but performing a static call.\n *\n * _Available since v3.3._\n */\n function functionStaticCall(\n address target,\n bytes memory data,\n string memory errorMessage\n ) internal view returns (bytes memory) {\n require(isContract(target), \"Address: static call to non-contract\");\n\n (bool success, bytes memory returndata) = target.staticcall(data);\n return verifyCallResult(success, returndata, errorMessage);\n }\n\n /**\n * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the\n * revert reason using the provided one.\n *\n * _Available since v4.3._\n */\n function verifyCallResult(\n bool success,\n bytes memory returndata,\n string memory errorMessage\n ) internal pure returns (bytes memory) {\n if (success) {\n return returndata;\n } else {\n // Look for revert reason and bubble it up if present\n if (returndata.length > 0) {\n // The easiest way to bubble the revert reason is using memory via assembly\n /// @solidity memory-safe-assembly\n assembly {\n let returndata_size := mload(returndata)\n revert(add(32, returndata), returndata_size)\n }\n } else {\n revert(errorMessage);\n }\n }\n }\n}\n" }, "@openzeppelin/contracts/proxy/ERC1967/ERC1967Proxy.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (proxy/ERC1967/ERC1967Proxy.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../Proxy.sol\";\nimport \"./ERC1967Upgrade.sol\";\n\n/**\n * @dev This contract implements an upgradeable proxy. It is upgradeable because calls are delegated to an\n * implementation address that can be changed. This address is stored in storage in the location specified by\n * https://eips.ethereum.org/EIPS/eip-1967[EIP1967], so that it doesn't conflict with the storage layout of the\n * implementation behind the proxy.\n */\ncontract ERC1967Proxy is Proxy, ERC1967Upgrade {\n /**\n * @dev Initializes the upgradeable proxy with an initial implementation specified by `_logic`.\n *\n * If `_data` is nonempty, it's used as data in a delegate call to `_logic`. This will typically be an encoded\n * function call, and allows initializating the storage of the proxy like a Solidity constructor.\n */\n constructor(address _logic, bytes memory _data) payable {\n assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256(\"eip1967.proxy.implementation\")) - 1));\n _upgradeToAndCall(_logic, _data, false);\n }\n\n /**\n * @dev Returns the current implementation address.\n */\n function _implementation() internal view virtual override returns (address impl) {\n return ERC1967Upgrade._getImplementation();\n }\n}\n" }, "@openzeppelin/contracts/proxy/Proxy.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.5.0) (proxy/Proxy.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM\n * instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to\n * be specified by overriding the virtual {_implementation} function.\n *\n * Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a\n * different contract through the {_delegate} function.\n *\n * The success and return data of the delegated call will be returned back to the caller of the proxy.\n */\nabstract contract Proxy {\n /**\n * @dev Delegates the current call to `implementation`.\n *\n * This function does not return to its internal call site, it will return directly to the external caller.\n */\n function _delegate(address implementation) internal virtual {\n assembly {\n // Copy msg.data. We take full control of memory in this inline assembly\n // block because it will not return to Solidity code. We overwrite the\n // Solidity scratch pad at memory position 0.\n calldatacopy(0, 0, calldatasize())\n\n // Call the implementation.\n // out and outsize are 0 because we don't know the size yet.\n let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)\n\n // Copy the returned data.\n returndatacopy(0, 0, returndatasize())\n\n switch result\n // delegatecall returns 0 on error.\n case 0 {\n revert(0, returndatasize())\n }\n default {\n return(0, returndatasize())\n }\n }\n }\n\n /**\n * @dev This is a virtual function that should be overriden so it returns the address to which the fallback function\n * and {_fallback} should delegate.\n */\n function _implementation() internal view virtual returns (address);\n\n /**\n * @dev Delegates the current call to the address returned by `_implementation()`.\n *\n * This function does not return to its internall call site, it will return directly to the external caller.\n */\n function _fallback() internal virtual {\n _beforeFallback();\n _delegate(_implementation());\n }\n\n /**\n * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other\n * function in the contract matches the call data.\n */\n fallback() external payable virtual {\n _fallback();\n }\n\n /**\n * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data\n * is empty.\n */\n receive() external payable virtual {\n _fallback();\n }\n\n /**\n * @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`\n * call, or as part of the Solidity `fallback` or `receive` functions.\n *\n * If overriden should call `super._beforeFallback()`.\n */\n function _beforeFallback() internal virtual {}\n}\n" }, "@openzeppelin/contracts/proxy/ERC1967/ERC1967Upgrade.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.5.0) (proxy/ERC1967/ERC1967Upgrade.sol)\n\npragma solidity ^0.8.2;\n\nimport \"../beacon/IBeacon.sol\";\nimport \"../../interfaces/draft-IERC1822.sol\";\nimport \"../../utils/Address.sol\";\nimport \"../../utils/StorageSlot.sol\";\n\n/**\n * @dev This abstract contract provides getters and event emitting update functions for\n * https://eips.ethereum.org/EIPS/eip-1967[EIP1967] slots.\n *\n * _Available since v4.1._\n *\n * @custom:oz-upgrades-unsafe-allow delegatecall\n */\nabstract contract ERC1967Upgrade {\n // This is the keccak-256 hash of \"eip1967.proxy.rollback\" subtracted by 1\n bytes32 private constant _ROLLBACK_SLOT = 0x4910fdfa16fed3260ed0e7147f7cc6da11a60208b5b9406d12a635614ffd9143;\n\n /**\n * @dev Storage slot with the address of the current implementation.\n * This is the keccak-256 hash of \"eip1967.proxy.implementation\" subtracted by 1, and is\n * validated in the constructor.\n */\n bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;\n\n /**\n * @dev Emitted when the implementation is upgraded.\n */\n event Upgraded(address indexed implementation);\n\n /**\n * @dev Returns the current implementation address.\n */\n function _getImplementation() internal view returns (address) {\n return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;\n }\n\n /**\n * @dev Stores a new address in the EIP1967 implementation slot.\n */\n function _setImplementation(address newImplementation) private {\n require(Address.isContract(newImplementation), \"ERC1967: new implementation is not a contract\");\n StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;\n }\n\n /**\n * @dev Perform implementation upgrade\n *\n * Emits an {Upgraded} event.\n */\n function _upgradeTo(address newImplementation) internal {\n _setImplementation(newImplementation);\n emit Upgraded(newImplementation);\n }\n\n /**\n * @dev Perform implementation upgrade with additional setup call.\n *\n * Emits an {Upgraded} event.\n */\n function _upgradeToAndCall(\n address newImplementation,\n bytes memory data,\n bool forceCall\n ) internal {\n _upgradeTo(newImplementation);\n if (data.length > 0 || forceCall) {\n Address.functionDelegateCall(newImplementation, data);\n }\n }\n\n /**\n * @dev Perform implementation upgrade with security checks for UUPS proxies, and additional setup call.\n *\n * Emits an {Upgraded} event.\n */\n function _upgradeToAndCallUUPS(\n address newImplementation,\n bytes memory data,\n bool forceCall\n ) internal {\n // Upgrades from old implementations will perform a rollback test. This test requires the new\n // implementation to upgrade back to the old, non-ERC1822 compliant, implementation. Removing\n // this special case will break upgrade paths from old UUPS implementation to new ones.\n if (StorageSlot.getBooleanSlot(_ROLLBACK_SLOT).value) {\n _setImplementation(newImplementation);\n } else {\n try IERC1822Proxiable(newImplementation).proxiableUUID() returns (bytes32 slot) {\n require(slot == _IMPLEMENTATION_SLOT, \"ERC1967Upgrade: unsupported proxiableUUID\");\n } catch {\n revert(\"ERC1967Upgrade: new implementation is not UUPS\");\n }\n _upgradeToAndCall(newImplementation, data, forceCall);\n }\n }\n\n /**\n * @dev Storage slot with the admin of the contract.\n * This is the keccak-256 hash of \"eip1967.proxy.admin\" subtracted by 1, and is\n * validated in the constructor.\n */\n bytes32 internal constant _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;\n\n /**\n * @dev Emitted when the admin account has changed.\n */\n event AdminChanged(address previousAdmin, address newAdmin);\n\n /**\n * @dev Returns the current admin.\n */\n function _getAdmin() internal view returns (address) {\n return StorageSlot.getAddressSlot(_ADMIN_SLOT).value;\n }\n\n /**\n * @dev Stores a new address in the EIP1967 admin slot.\n */\n function _setAdmin(address newAdmin) private {\n require(newAdmin != address(0), \"ERC1967: new admin is the zero address\");\n StorageSlot.getAddressSlot(_ADMIN_SLOT).value = newAdmin;\n }\n\n /**\n * @dev Changes the admin of the proxy.\n *\n * Emits an {AdminChanged} event.\n */\n function _changeAdmin(address newAdmin) internal {\n emit AdminChanged(_getAdmin(), newAdmin);\n _setAdmin(newAdmin);\n }\n\n /**\n * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.\n * This is bytes32(uint256(keccak256('eip1967.proxy.beacon')) - 1)) and is validated in the constructor.\n */\n bytes32 internal constant _BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;\n\n /**\n * @dev Emitted when the beacon is upgraded.\n */\n event BeaconUpgraded(address indexed beacon);\n\n /**\n * @dev Returns the current beacon.\n */\n function _getBeacon() internal view returns (address) {\n return StorageSlot.getAddressSlot(_BEACON_SLOT).value;\n }\n\n /**\n * @dev Stores a new beacon in the EIP1967 beacon slot.\n */\n function _setBeacon(address newBeacon) private {\n require(Address.isContract(newBeacon), \"ERC1967: new beacon is not a contract\");\n require(\n Address.isContract(IBeacon(newBeacon).implementation()),\n \"ERC1967: beacon implementation is not a contract\"\n );\n StorageSlot.getAddressSlot(_BEACON_SLOT).value = newBeacon;\n }\n\n /**\n * @dev Perform beacon upgrade with additional setup call. Note: This upgrades the address of the beacon, it does\n * not upgrade the implementation contained in the beacon (see {UpgradeableBeacon-_setImplementation} for that).\n *\n * Emits a {BeaconUpgraded} event.\n */\n function _upgradeBeaconToAndCall(\n address newBeacon,\n bytes memory data,\n bool forceCall\n ) internal {\n _setBeacon(newBeacon);\n emit BeaconUpgraded(newBeacon);\n if (data.length > 0 || forceCall) {\n Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);\n }\n }\n}\n" }, "@openzeppelin/contracts/proxy/beacon/IBeacon.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (proxy/beacon/IBeacon.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev This is the interface that {BeaconProxy} expects of its beacon.\n */\ninterface IBeacon {\n /**\n * @dev Must return an address that can be used as a delegate call target.\n *\n * {BeaconProxy} will check that this address is a contract.\n */\n function implementation() external view returns (address);\n}\n" }, "@openzeppelin/contracts/interfaces/draft-IERC1822.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.5.0) (interfaces/draft-IERC1822.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev ERC1822: Universal Upgradeable Proxy Standard (UUPS) documents a method for upgradeability through a simplified\n * proxy whose upgrades are fully controlled by the current implementation.\n */\ninterface IERC1822Proxiable {\n /**\n * @dev Returns the storage slot that the proxiable contract assumes is being used to store the implementation\n * address.\n *\n * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks\n * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this\n * function revert if invoked through a proxy.\n */\n function proxiableUUID() external view returns (bytes32);\n}\n" }, "@openzeppelin/contracts/utils/Address.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)\n\npragma solidity ^0.8.1;\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary Address {\n /**\n * @dev Returns true if `account` is a contract.\n *\n * [IMPORTANT]\n * ====\n * It is unsafe to assume that an address for which this function returns\n * false is an externally-owned account (EOA) and not a contract.\n *\n * Among others, `isContract` will return false for the following\n * types of addresses:\n *\n * - an externally-owned account\n * - a contract in construction\n * - an address where a contract will be created\n * - an address where a contract lived, but was destroyed\n * ====\n *\n * [IMPORTANT]\n * ====\n * You shouldn't rely on `isContract` to protect against flash loan attacks!\n *\n * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets\n * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract\n * constructor.\n * ====\n */\n function isContract(address account) internal view returns (bool) {\n // This method relies on extcodesize/address.code.length, which returns 0\n // for contracts in construction, since the code is only stored at the end\n // of the constructor execution.\n\n return account.code.length > 0;\n }\n\n /**\n * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n * `recipient`, forwarding all available gas and reverting on errors.\n *\n * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n * of certain opcodes, possibly making contracts go over the 2300 gas limit\n * imposed by `transfer`, making them unable to receive funds via\n * `transfer`. {sendValue} removes this limitation.\n *\n * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n *\n * IMPORTANT: because control is transferred to `recipient`, care must be\n * taken to not create reentrancy vulnerabilities. Consider using\n * {ReentrancyGuard} or the\n * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n */\n function sendValue(address payable recipient, uint256 amount) internal {\n require(address(this).balance >= amount, \"Address: insufficient balance\");\n\n (bool success, ) = recipient.call{value: amount}(\"\");\n require(success, \"Address: unable to send value, recipient may have reverted\");\n }\n\n /**\n * @dev Performs a Solidity function call using a low level `call`. A\n * plain `call` is an unsafe replacement for a function call: use this\n * function instead.\n *\n * If `target` reverts with a revert reason, it is bubbled up by this\n * function (like regular Solidity function calls).\n *\n * Returns the raw returned data. To convert to the expected return value,\n * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n *\n * Requirements:\n *\n * - `target` must be a contract.\n * - calling `target` with `data` must not revert.\n *\n * _Available since v3.1._\n */\n function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n return functionCall(target, data, \"Address: low-level call failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with\n * `errorMessage` as a fallback revert reason when `target` reverts.\n *\n * _Available since v3.1._\n */\n function functionCall(\n address target,\n bytes memory data,\n string memory errorMessage\n ) internal returns (bytes memory) {\n return functionCallWithValue(target, data, 0, errorMessage);\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but also transferring `value` wei to `target`.\n *\n * Requirements:\n *\n * - the calling contract must have an ETH balance of at least `value`.\n * - the called Solidity function must be `payable`.\n *\n * _Available since v3.1._\n */\n function functionCallWithValue(\n address target,\n bytes memory data,\n uint256 value\n ) internal returns (bytes memory) {\n return functionCallWithValue(target, data, value, \"Address: low-level call with value failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but\n * with `errorMessage` as a fallback revert reason when `target` reverts.\n *\n * _Available since v3.1._\n */\n function functionCallWithValue(\n address target,\n bytes memory data,\n uint256 value,\n string memory errorMessage\n ) internal returns (bytes memory) {\n require(address(this).balance >= value, \"Address: insufficient balance for call\");\n require(isContract(target), \"Address: call to non-contract\");\n\n (bool success, bytes memory returndata) = target.call{value: value}(data);\n return verifyCallResult(success, returndata, errorMessage);\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but performing a static call.\n *\n * _Available since v3.3._\n */\n function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n return functionStaticCall(target, data, \"Address: low-level static call failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n * but performing a static call.\n *\n * _Available since v3.3._\n */\n function functionStaticCall(\n address target,\n bytes memory data,\n string memory errorMessage\n ) internal view returns (bytes memory) {\n require(isContract(target), \"Address: static call to non-contract\");\n\n (bool success, bytes memory returndata) = target.staticcall(data);\n return verifyCallResult(success, returndata, errorMessage);\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but performing a delegate call.\n *\n * _Available since v3.4._\n */\n function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {\n return functionDelegateCall(target, data, \"Address: low-level delegate call failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n * but performing a delegate call.\n *\n * _Available since v3.4._\n */\n function functionDelegateCall(\n address target,\n bytes memory data,\n string memory errorMessage\n ) internal returns (bytes memory) {\n require(isContract(target), \"Address: delegate call to non-contract\");\n\n (bool success, bytes memory returndata) = target.delegatecall(data);\n return verifyCallResult(success, returndata, errorMessage);\n }\n\n /**\n * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the\n * revert reason using the provided one.\n *\n * _Available since v4.3._\n */\n function verifyCallResult(\n bool success,\n bytes memory returndata,\n string memory errorMessage\n ) internal pure returns (bytes memory) {\n if (success) {\n return returndata;\n } else {\n // Look for revert reason and bubble it up if present\n if (returndata.length > 0) {\n // The easiest way to bubble the revert reason is using memory via assembly\n\n assembly {\n let returndata_size := mload(returndata)\n revert(add(32, returndata), returndata_size)\n }\n } else {\n revert(errorMessage);\n }\n }\n }\n}\n" }, "@openzeppelin/contracts/utils/StorageSlot.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/StorageSlot.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Library for reading and writing primitive types to specific storage slots.\n *\n * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.\n * This library helps with reading and writing to such slots without the need for inline assembly.\n *\n * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.\n *\n * Example usage to set ERC1967 implementation slot:\n * ```\n * contract ERC1967 {\n * bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;\n *\n * function _getImplementation() internal view returns (address) {\n * return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;\n * }\n *\n * function _setImplementation(address newImplementation) internal {\n * require(Address.isContract(newImplementation), \"ERC1967: new implementation is not a contract\");\n * StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;\n * }\n * }\n * ```\n *\n * _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._\n */\nlibrary StorageSlot {\n struct AddressSlot {\n address value;\n }\n\n struct BooleanSlot {\n bool value;\n }\n\n struct Bytes32Slot {\n bytes32 value;\n }\n\n struct Uint256Slot {\n uint256 value;\n }\n\n /**\n * @dev Returns an `AddressSlot` with member `value` located at `slot`.\n */\n function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {\n assembly {\n r.slot := slot\n }\n }\n\n /**\n * @dev Returns an `BooleanSlot` with member `value` located at `slot`.\n */\n function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {\n assembly {\n r.slot := slot\n }\n }\n\n /**\n * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.\n */\n function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {\n assembly {\n r.slot := slot\n }\n }\n\n /**\n * @dev Returns an `Uint256Slot` with member `value` located at `slot`.\n */\n function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {\n assembly {\n r.slot := slot\n }\n }\n}\n" }, "@openzeppelin/contracts/access/Ownable.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../utils/Context.sol\";\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * By default, the owner account will be the one that deploys the contract. This\n * can later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n address private _owner;\n\n event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n /**\n * @dev Initializes the contract setting the deployer as the initial owner.\n */\n constructor() {\n _transferOwnership(_msgSender());\n }\n\n /**\n * @dev Returns the address of the current owner.\n */\n function owner() public view virtual returns (address) {\n return _owner;\n }\n\n /**\n * @dev Throws if called by any account other than the owner.\n */\n modifier onlyOwner() {\n require(owner() == _msgSender(), \"Ownable: caller is not the owner\");\n _;\n }\n\n /**\n * @dev Leaves the contract without owner. It will not be possible to call\n * `onlyOwner` functions anymore. Can only be called by the current owner.\n *\n * NOTE: Renouncing ownership will leave the contract without an owner,\n * thereby removing any functionality that is only available to the owner.\n */\n function renounceOwnership() public virtual onlyOwner {\n _transferOwnership(address(0));\n }\n\n /**\n * @dev Transfers ownership of the contract to a new account (`newOwner`).\n * Can only be called by the current owner.\n */\n function transferOwnership(address newOwner) public virtual onlyOwner {\n require(newOwner != address(0), \"Ownable: new owner is the zero address\");\n _transferOwnership(newOwner);\n }\n\n /**\n * @dev Transfers ownership of the contract to a new account (`newOwner`).\n * Internal function without access restriction.\n */\n function _transferOwnership(address newOwner) internal virtual {\n address oldOwner = _owner;\n _owner = newOwner;\n emit OwnershipTransferred(oldOwner, newOwner);\n }\n}\n" }, "@openzeppelin/contracts/utils/Context.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n function _msgSender() internal view virtual returns (address) {\n return msg.sender;\n }\n\n function _msgData() internal view virtual returns (bytes calldata) {\n return msg.data;\n }\n}\n" }, "@openzeppelin/contracts/token/ERC20/IERC20.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/IERC20.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC20 standard as defined in the EIP.\n */\ninterface IERC20 {\n /**\n * @dev Returns the amount of tokens in existence.\n */\n function totalSupply() external view returns (uint256);\n\n /**\n * @dev Returns the amount of tokens owned by `account`.\n */\n function balanceOf(address account) external view returns (uint256);\n\n /**\n * @dev Moves `amount` tokens from the caller's account to `to`.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * Emits a {Transfer} event.\n */\n function transfer(address to, uint256 amount) external returns (bool);\n\n /**\n * @dev Returns the remaining number of tokens that `spender` will be\n * allowed to spend on behalf of `owner` through {transferFrom}. This is\n * zero by default.\n *\n * This value changes when {approve} or {transferFrom} are called.\n */\n function allowance(address owner, address spender) external view returns (uint256);\n\n /**\n * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * IMPORTANT: Beware that changing an allowance with this method brings the risk\n * that someone may use both the old and the new allowance by unfortunate\n * transaction ordering. One possible solution to mitigate this race\n * condition is to first reduce the spender's allowance to 0 and set the\n * desired value afterwards:\n * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n *\n * Emits an {Approval} event.\n */\n function approve(address spender, uint256 amount) external returns (bool);\n\n /**\n * @dev Moves `amount` tokens from `from` to `to` using the\n * allowance mechanism. `amount` is then deducted from the caller's\n * allowance.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * Emits a {Transfer} event.\n */\n function transferFrom(\n address from,\n address to,\n uint256 amount\n ) external returns (bool);\n\n /**\n * @dev Emitted when `value` tokens are moved from one account (`from`) to\n * another (`to`).\n *\n * Note that `value` may be zero.\n */\n event Transfer(address indexed from, address indexed to, uint256 value);\n\n /**\n * @dev Emitted when the allowance of a `spender` for an `owner` is set by\n * a call to {approve}. `value` is the new allowance.\n */\n event Approval(address indexed owner, address indexed spender, uint256 value);\n}\n" }, "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../IERC20.sol\";\nimport \"../../../utils/Address.sol\";\n\n/**\n * @title SafeERC20\n * @dev Wrappers around ERC20 operations that throw on failure (when the token\n * contract returns false). Tokens that return no value (and instead revert or\n * throw on failure) are also supported, non-reverting calls are assumed to be\n * successful.\n * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,\n * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.\n */\nlibrary SafeERC20 {\n using Address for address;\n\n function safeTransfer(\n IERC20 token,\n address to,\n uint256 value\n ) internal {\n _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));\n }\n\n function safeTransferFrom(\n IERC20 token,\n address from,\n address to,\n uint256 value\n ) internal {\n _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));\n }\n\n /**\n * @dev Deprecated. This function has issues similar to the ones found in\n * {IERC20-approve}, and its usage is discouraged.\n *\n * Whenever possible, use {safeIncreaseAllowance} and\n * {safeDecreaseAllowance} instead.\n */\n function safeApprove(\n IERC20 token,\n address spender,\n uint256 value\n ) internal {\n // safeApprove should only be called when setting an initial allowance,\n // or when resetting it to zero. To increase and decrease it, use\n // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'\n require(\n (value == 0) || (token.allowance(address(this), spender) == 0),\n \"SafeERC20: approve from non-zero to non-zero allowance\"\n );\n _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));\n }\n\n function safeIncreaseAllowance(\n IERC20 token,\n address spender,\n uint256 value\n ) internal {\n uint256 newAllowance = token.allowance(address(this), spender) + value;\n _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));\n }\n\n function safeDecreaseAllowance(\n IERC20 token,\n address spender,\n uint256 value\n ) internal {\n unchecked {\n uint256 oldAllowance = token.allowance(address(this), spender);\n require(oldAllowance >= value, \"SafeERC20: decreased allowance below zero\");\n uint256 newAllowance = oldAllowance - value;\n _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));\n }\n }\n\n /**\n * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement\n * on the return value: the return value is optional (but if data is returned, it must not be false).\n * @param token The token targeted by the call.\n * @param data The call data (encoded using abi.encode or one of its variants).\n */\n function _callOptionalReturn(IERC20 token, bytes memory data) private {\n // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since\n // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that\n // the target address contains contract code and also asserts for success in the low-level call.\n\n bytes memory returndata = address(token).functionCall(data, \"SafeERC20: low-level call failed\");\n if (returndata.length > 0) {\n // Return data is optional\n require(abi.decode(returndata, (bool)), \"SafeERC20: ERC20 operation did not succeed\");\n }\n }\n}\n" } }, "settings": { "optimizer": { "enabled": true, "runs": 10000 }, "outputSelection": { "*": { "*": [ "evm.bytecode", "evm.deployedBytecode", "devdoc", "userdoc", "metadata", "abi" ] } }, "libraries": {} } }