// This contract is part of Zellic’s smart contract dataset, which is a collection of publicly available contract code gathered as of March 2023. // SPDX-License-Identifier: MIT // File: @openzeppelin/contracts/security/ReentrancyGuard.sol // OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol) pragma solidity ^0.8.0; /** * @dev Contract module that helps prevent reentrant calls to a function. * * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier * available, which can be applied to functions to make sure there are no nested * (reentrant) calls to them. * * Note that because there is a single `nonReentrant` guard, functions marked as * `nonReentrant` may not call one another. This can be worked around by making * those functions `private`, and then adding `external` `nonReentrant` entry * points to them. * * TIP: If you would like to learn more about reentrancy and alternative ways * to protect against it, check out our blog post * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul]. */ abstract contract ReentrancyGuard { // Booleans are more expensive than uint256 or any type that takes up a full // word because each write operation emits an extra SLOAD to first read the // slot's contents, replace the bits taken up by the boolean, and then write // back. This is the compiler's defense against contract upgrades and // pointer aliasing, and it cannot be disabled. // The values being non-zero value makes deployment a bit more expensive, // but in exchange the refund on every call to nonReentrant will be lower in // amount. Since refunds are capped to a percentage of the total // transaction's gas, it is best to keep them low in cases like this one, to // increase the likelihood of the full refund coming into effect. uint256 private constant _NOT_ENTERED = 1; uint256 private constant _ENTERED = 2; uint256 private _status; constructor() { _status = _NOT_ENTERED; } /** * @dev Prevents a contract from calling itself, directly or indirectly. * Calling a `nonReentrant` function from another `nonReentrant` * function is not supported. It is possible to prevent this from happening * by making the `nonReentrant` function external, and making it call a * `private` function that does the actual work. */ modifier nonReentrant() { // On the first call to nonReentrant, _notEntered will be true require(_status != _ENTERED, "ReentrancyGuard: reentrant call"); // Any calls to nonReentrant after this point will fail _status = _ENTERED; _; // By storing the original value once again, a refund is triggered (see // https://eips.ethereum.org/EIPS/eip-2200) _status = _NOT_ENTERED; } } // File: @openzeppelin/contracts/utils/Strings.sol // OpenZeppelin Contracts (last updated v4.7.0) (utils/Strings.sol) pragma solidity ^0.8.0; /** * @dev String operations. */ library Strings { bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef"; uint8 private constant _ADDRESS_LENGTH = 20; /** * @dev Converts a `uint256` to its ASCII `string` decimal representation. */ function toString(uint256 value) internal pure returns (string memory) { // Inspired by OraclizeAPI's implementation - MIT licence // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol if (value == 0) { return "0"; } uint256 temp = value; uint256 digits; while (temp != 0) { digits++; temp /= 10; } bytes memory buffer = new bytes(digits); while (value != 0) { digits -= 1; buffer[digits] = bytes1(uint8(48 + uint256(value % 10))); value /= 10; } return string(buffer); } /** * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation. */ function toHexString(uint256 value) internal pure returns (string memory) { if (value == 0) { return "0x00"; } uint256 temp = value; uint256 length = 0; while (temp != 0) { length++; temp >>= 8; } return toHexString(value, length); } /** * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length. */ function toHexString(uint256 value, uint256 length) internal pure returns (string memory) { bytes memory buffer = new bytes(2 * length + 2); buffer[0] = "0"; buffer[1] = "x"; for (uint256 i = 2 * length + 1; i > 1; --i) { buffer[i] = _HEX_SYMBOLS[value & 0xf]; value >>= 4; } require(value == 0, "Strings: hex length insufficient"); return string(buffer); } /** * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation. */ function toHexString(address addr) internal pure returns (string memory) { return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH); } } // File: @openzeppelin/contracts/utils/Context.sol // OpenZeppelin Contracts v4.4.1 (utils/Context.sol) pragma solidity ^0.8.0; /** * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ abstract contract Context { function _msgSender() internal view virtual returns (address) { return msg.sender; } function _msgData() internal view virtual returns (bytes calldata) { return msg.data; } } // File: @openzeppelin/contracts/access/Ownable.sol // OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol) pragma solidity ^0.8.0; /** * @dev Contract module which provides a basic access control mechanism, where * there is an account (an owner) that can be granted exclusive access to * specific functions. * * By default, the owner account will be the one that deploys the contract. This * can later be changed with {transferOwnership}. * * This module is used through inheritance. It will make available the modifier * `onlyOwner`, which can be applied to your functions to restrict their use to * the owner. */ abstract contract Ownable is Context { address private _owner; event OwnershipTransferred(address indexed previousOwner, address indexed newOwner); /** * @dev Initializes the contract setting the deployer as the initial owner. */ constructor() { _transferOwnership(_msgSender()); } /** * @dev Throws if called by any account other than the owner. */ modifier onlyOwner() { _checkOwner(); _; } /** * @dev Returns the address of the current owner. */ function owner() public view virtual returns (address) { return _owner; } /** * @dev Throws if the sender is not the owner. */ function _checkOwner() internal view virtual { require(owner() == _msgSender(), "Ownable: caller is not the owner"); } /** * @dev Leaves the contract without owner. It will not be possible to call * `onlyOwner` functions anymore. Can only be called by the current owner. * * NOTE: Renouncing ownership will leave the contract without an owner, * thereby removing any functionality that is only available to the owner. */ function renounceOwnership() public virtual onlyOwner { _transferOwnership(address(0)); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Can only be called by the current owner. */ function transferOwnership(address newOwner) public virtual onlyOwner { require(newOwner != address(0), "Ownable: new owner is the zero address"); _transferOwnership(newOwner); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Internal function without access restriction. */ function _transferOwnership(address newOwner) internal virtual { address oldOwner = _owner; _owner = newOwner; emit OwnershipTransferred(oldOwner, newOwner); } } // File: erc721a/contracts/IERC721A.sol // ERC721A Contracts v4.1.0 // Creator: Chiru Labs pragma solidity ^0.8.4; /** * @dev Interface of an ERC721A compliant contract. */ interface IERC721A { /** * The caller must own the token or be an approved operator. */ error ApprovalCallerNotOwnerNorApproved(); /** * The token does not exist. */ error ApprovalQueryForNonexistentToken(); /** * The caller cannot approve to their own address. */ error ApproveToCaller(); /** * Cannot query the balance for the zero address. */ error BalanceQueryForZeroAddress(); /** * Cannot mint to the zero address. */ error MintToZeroAddress(); /** * The quantity of tokens minted must be more than zero. */ error MintZeroQuantity(); /** * The token does not exist. */ error OwnerQueryForNonexistentToken(); /** * The caller must own the token or be an approved operator. */ error TransferCallerNotOwnerNorApproved(); /** * The token must be owned by `from`. */ error TransferFromIncorrectOwner(); /** * Cannot safely transfer to a contract that does not implement the ERC721Receiver interface. */ error TransferToNonERC721ReceiverImplementer(); /** * Cannot transfer to the zero address. */ error TransferToZeroAddress(); /** * The token does not exist. */ error URIQueryForNonexistentToken(); /** * The `quantity` minted with ERC2309 exceeds the safety limit. */ error MintERC2309QuantityExceedsLimit(); /** * The `extraData` cannot be set on an unintialized ownership slot. */ error OwnershipNotInitializedForExtraData(); struct TokenOwnership { // The address of the owner. address addr; // Keeps track of the start time of ownership with minimal overhead for tokenomics. uint64 startTimestamp; // Whether the token has been burned. bool burned; // Arbitrary data similar to `startTimestamp` that can be set through `_extraData`. uint24 extraData; } /** * @dev Returns the total amount of tokens stored by the contract. * * Burned tokens are calculated here, use `_totalMinted()` if you want to count just minted tokens. */ function totalSupply() external view returns (uint256); // ============================== // IERC165 // ============================== /** * @dev Returns true if this contract implements the interface defined by * `interfaceId`. See the corresponding * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section] * to learn more about how these ids are created. * * This function call must use less than 30 000 gas. */ function supportsInterface(bytes4 interfaceId) external view returns (bool); // ============================== // IERC721 // ============================== /** * @dev Emitted when `tokenId` token is transferred from `from` to `to`. */ event Transfer(address indexed from, address indexed to, uint256 indexed tokenId); /** * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token. */ event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId); /** * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets. */ event ApprovalForAll(address indexed owner, address indexed operator, bool approved); /** * @dev Returns the number of tokens in ``owner``'s account. */ function balanceOf(address owner) external view returns (uint256 balance); /** * @dev Returns the owner of the `tokenId` token. * * Requirements: * * - `tokenId` must exist. */ function ownerOf(uint256 tokenId) external view returns (address owner); /** * @dev Safely transfers `tokenId` token from `from` to `to`. * * Requirements: * * - `from` cannot be the zero address. * - `to` cannot be the zero address. * - `tokenId` token must exist and be owned by `from`. * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}. * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer. * * Emits a {Transfer} event. */ function safeTransferFrom( address from, address to, uint256 tokenId, bytes calldata data ) external; /** * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients * are aware of the ERC721 protocol to prevent tokens from being forever locked. * * Requirements: * * - `from` cannot be the zero address. * - `to` cannot be the zero address. * - `tokenId` token must exist and be owned by `from`. * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}. * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer. * * Emits a {Transfer} event. */ function safeTransferFrom( address from, address to, uint256 tokenId ) external; /** * @dev Transfers `tokenId` token from `from` to `to`. * * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible. * * Requirements: * * - `from` cannot be the zero address. * - `to` cannot be the zero address. * - `tokenId` token must be owned by `from`. * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}. * * Emits a {Transfer} event. */ function transferFrom( address from, address to, uint256 tokenId ) external; /** * @dev Gives permission to `to` to transfer `tokenId` token to another account. * The approval is cleared when the token is transferred. * * Only a single account can be approved at a time, so approving the zero address clears previous approvals. * * Requirements: * * - The caller must own the token or be an approved operator. * - `tokenId` must exist. * * Emits an {Approval} event. */ function approve(address to, uint256 tokenId) external; /** * @dev Approve or remove `operator` as an operator for the caller. * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller. * * Requirements: * * - The `operator` cannot be the caller. * * Emits an {ApprovalForAll} event. */ function setApprovalForAll(address operator, bool _approved) external; /** * @dev Returns the account approved for `tokenId` token. * * Requirements: * * - `tokenId` must exist. */ function getApproved(uint256 tokenId) external view returns (address operator); /** * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`. * * See {setApprovalForAll} */ function isApprovedForAll(address owner, address operator) external view returns (bool); // ============================== // IERC721Metadata // ============================== /** * @dev Returns the token collection name. */ function name() external view returns (string memory); /** * @dev Returns the token collection symbol. */ function symbol() external view returns (string memory); /** * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token. */ function tokenURI(uint256 tokenId) external view returns (string memory); // ============================== // IERC2309 // ============================== /** * @dev Emitted when tokens in `fromTokenId` to `toTokenId` (inclusive) is transferred from `from` to `to`, * as defined in the ERC2309 standard. See `_mintERC2309` for more details. */ event ConsecutiveTransfer(uint256 indexed fromTokenId, uint256 toTokenId, address indexed from, address indexed to); } // File: erc721a/contracts/ERC721A.sol // ERC721A Contracts v4.1.0 // Creator: Chiru Labs pragma solidity ^0.8.4; /** * @dev ERC721 token receiver interface. */ interface ERC721A__IERC721Receiver { function onERC721Received( address operator, address from, uint256 tokenId, bytes calldata data ) external returns (bytes4); } /** * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, * including the Metadata extension. Built to optimize for lower gas during batch mints. * * Assumes serials are sequentially minted starting at `_startTokenId()` * (defaults to 0, e.g. 0, 1, 2, 3..). * * Assumes that an owner cannot have more than 2**64 - 1 (max value of uint64) of supply. * * Assumes that the maximum token id cannot exceed 2**256 - 1 (max value of uint256). */ contract ERC721A is IERC721A { // Mask of an entry in packed address data. uint256 private constant BITMASK_ADDRESS_DATA_ENTRY = (1 << 64) - 1; // The bit position of `numberMinted` in packed address data. uint256 private constant BITPOS_NUMBER_MINTED = 64; // The bit position of `numberBurned` in packed address data. uint256 private constant BITPOS_NUMBER_BURNED = 128; // The bit position of `aux` in packed address data. uint256 private constant BITPOS_AUX = 192; // Mask of all 256 bits in packed address data except the 64 bits for `aux`. uint256 private constant BITMASK_AUX_COMPLEMENT = (1 << 192) - 1; // The bit position of `startTimestamp` in packed ownership. uint256 private constant BITPOS_START_TIMESTAMP = 160; // The bit mask of the `burned` bit in packed ownership. uint256 private constant BITMASK_BURNED = 1 << 224; // The bit position of the `nextInitialized` bit in packed ownership. uint256 private constant BITPOS_NEXT_INITIALIZED = 225; // The bit mask of the `nextInitialized` bit in packed ownership. uint256 private constant BITMASK_NEXT_INITIALIZED = 1 << 225; // The bit position of `extraData` in packed ownership. uint256 private constant BITPOS_EXTRA_DATA = 232; // Mask of all 256 bits in a packed ownership except the 24 bits for `extraData`. uint256 private constant BITMASK_EXTRA_DATA_COMPLEMENT = (1 << 232) - 1; // The mask of the lower 160 bits for addresses. uint256 private constant BITMASK_ADDRESS = (1 << 160) - 1; // The maximum `quantity` that can be minted with `_mintERC2309`. // This limit is to prevent overflows on the address data entries. // For a limit of 5000, a total of 3.689e15 calls to `_mintERC2309` // is required to cause an overflow, which is unrealistic. uint256 private constant MAX_MINT_ERC2309_QUANTITY_LIMIT = 5000; // The tokenId of the next token to be minted. uint256 private _currentIndex; // The number of tokens burned. uint256 private _burnCounter; // Token name string private _name; // Token symbol string private _symbol; // Mapping from token ID to ownership details // An empty struct value does not necessarily mean the token is unowned. // See `_packedOwnershipOf` implementation for details. // // Bits Layout: // - [0..159] `addr` // - [160..223] `startTimestamp` // - [224] `burned` // - [225] `nextInitialized` // - [232..255] `extraData` mapping(uint256 => uint256) private _packedOwnerships; // Mapping owner address to address data. // // Bits Layout: // - [0..63] `balance` // - [64..127] `numberMinted` // - [128..191] `numberBurned` // - [192..255] `aux` mapping(address => uint256) private _packedAddressData; // Mapping from token ID to approved address. mapping(uint256 => address) private _tokenApprovals; // Mapping from owner to operator approvals mapping(address => mapping(address => bool)) private _operatorApprovals; constructor(string memory name_, string memory symbol_) { _name = name_; _symbol = symbol_; _currentIndex = _startTokenId(); } /** * @dev Returns the starting token ID. * To change the starting token ID, please override this function. */ function _startTokenId() internal view virtual returns (uint256) { return 0; } /** * @dev Returns the next token ID to be minted. */ function _nextTokenId() internal view returns (uint256) { return _currentIndex; } /** * @dev Returns the total number of tokens in existence. * Burned tokens will reduce the count. * To get the total number of tokens minted, please see `_totalMinted`. */ function totalSupply() public view override returns (uint256) { // Counter underflow is impossible as _burnCounter cannot be incremented // more than `_currentIndex - _startTokenId()` times. unchecked { return _currentIndex - _burnCounter - _startTokenId(); } } /** * @dev Returns the total amount of tokens minted in the contract. */ function _totalMinted() internal view returns (uint256) { // Counter underflow is impossible as _currentIndex does not decrement, // and it is initialized to `_startTokenId()` unchecked { return _currentIndex - _startTokenId(); } } /** * @dev Returns the total number of tokens burned. */ function _totalBurned() internal view returns (uint256) { return _burnCounter; } /** * @dev See {IERC165-supportsInterface}. */ function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) { // The interface IDs are constants representing the first 4 bytes of the XOR of // all function selectors in the interface. See: https://eips.ethereum.org/EIPS/eip-165 // e.g. `bytes4(i.functionA.selector ^ i.functionB.selector ^ ...)` return interfaceId == 0x01ffc9a7 || // ERC165 interface ID for ERC165. interfaceId == 0x80ac58cd || // ERC165 interface ID for ERC721. interfaceId == 0x5b5e139f; // ERC165 interface ID for ERC721Metadata. } /** * @dev See {IERC721-balanceOf}. */ function balanceOf(address owner) public view override returns (uint256) { if (owner == address(0)) revert BalanceQueryForZeroAddress(); return _packedAddressData[owner] & BITMASK_ADDRESS_DATA_ENTRY; } /** * Returns the number of tokens minted by `owner`. */ function _numberMinted(address owner) internal view returns (uint256) { return (_packedAddressData[owner] >> BITPOS_NUMBER_MINTED) & BITMASK_ADDRESS_DATA_ENTRY; } /** * Returns the number of tokens burned by or on behalf of `owner`. */ function _numberBurned(address owner) internal view returns (uint256) { return (_packedAddressData[owner] >> BITPOS_NUMBER_BURNED) & BITMASK_ADDRESS_DATA_ENTRY; } /** * Returns the auxiliary data for `owner`. (e.g. number of whitelist mint slots used). */ function _getAux(address owner) internal view returns (uint64) { return uint64(_packedAddressData[owner] >> BITPOS_AUX); } /** * Sets the auxiliary data for `owner`. (e.g. number of whitelist mint slots used). * If there are multiple variables, please pack them into a uint64. */ function _setAux(address owner, uint64 aux) internal { uint256 packed = _packedAddressData[owner]; uint256 auxCasted; // Cast `aux` with assembly to avoid redundant masking. assembly { auxCasted := aux } packed = (packed & BITMASK_AUX_COMPLEMENT) | (auxCasted << BITPOS_AUX); _packedAddressData[owner] = packed; } /** * Returns the packed ownership data of `tokenId`. */ function _packedOwnershipOf(uint256 tokenId) private view returns (uint256) { uint256 curr = tokenId; unchecked { if (_startTokenId() <= curr) if (curr < _currentIndex) { uint256 packed = _packedOwnerships[curr]; // If not burned. if (packed & BITMASK_BURNED == 0) { // Invariant: // There will always be an ownership that has an address and is not burned // before an ownership that does not have an address and is not burned. // Hence, curr will not underflow. // // We can directly compare the packed value. // If the address is zero, packed is zero. while (packed == 0) { packed = _packedOwnerships[--curr]; } return packed; } } } revert OwnerQueryForNonexistentToken(); } /** * Returns the unpacked `TokenOwnership` struct from `packed`. */ function _unpackedOwnership(uint256 packed) private pure returns (TokenOwnership memory ownership) { ownership.addr = address(uint160(packed)); ownership.startTimestamp = uint64(packed >> BITPOS_START_TIMESTAMP); ownership.burned = packed & BITMASK_BURNED != 0; ownership.extraData = uint24(packed >> BITPOS_EXTRA_DATA); } /** * Returns the unpacked `TokenOwnership` struct at `index`. */ function _ownershipAt(uint256 index) internal view returns (TokenOwnership memory) { return _unpackedOwnership(_packedOwnerships[index]); } /** * @dev Initializes the ownership slot minted at `index` for efficiency purposes. */ function _initializeOwnershipAt(uint256 index) internal { if (_packedOwnerships[index] == 0) { _packedOwnerships[index] = _packedOwnershipOf(index); } } /** * Gas spent here starts off proportional to the maximum mint batch size. * It gradually moves to O(1) as tokens get transferred around in the collection over time. */ function _ownershipOf(uint256 tokenId) internal view returns (TokenOwnership memory) { return _unpackedOwnership(_packedOwnershipOf(tokenId)); } /** * @dev Packs ownership data into a single uint256. */ function _packOwnershipData(address owner, uint256 flags) private view returns (uint256 result) { assembly { // Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean. owner := and(owner, BITMASK_ADDRESS) // `owner | (block.timestamp << BITPOS_START_TIMESTAMP) | flags`. result := or(owner, or(shl(BITPOS_START_TIMESTAMP, timestamp()), flags)) } } /** * @dev See {IERC721-ownerOf}. */ function ownerOf(uint256 tokenId) public view override returns (address) { return address(uint160(_packedOwnershipOf(tokenId))); } /** * @dev See {IERC721Metadata-name}. */ function name() public view virtual override returns (string memory) { return _name; } /** * @dev See {IERC721Metadata-symbol}. */ function symbol() public view virtual override returns (string memory) { return _symbol; } /** * @dev See {IERC721Metadata-tokenURI}. */ function tokenURI(uint256 tokenId) public view virtual override returns (string memory) { if (!_exists(tokenId)) revert URIQueryForNonexistentToken(); string memory baseURI = _baseURI(); return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, _toString(tokenId))) : ''; } /** * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each * token will be the concatenation of the `baseURI` and the `tokenId`. Empty * by default, it can be overridden in child contracts. */ function _baseURI() internal view virtual returns (string memory) { return ''; } /** * @dev Returns the `nextInitialized` flag set if `quantity` equals 1. */ function _nextInitializedFlag(uint256 quantity) private pure returns (uint256 result) { // For branchless setting of the `nextInitialized` flag. assembly { // `(quantity == 1) << BITPOS_NEXT_INITIALIZED`. result := shl(BITPOS_NEXT_INITIALIZED, eq(quantity, 1)) } } /** * @dev See {IERC721-approve}. */ function approve(address to, uint256 tokenId) public override { address owner = ownerOf(tokenId); if (_msgSenderERC721A() != owner) if (!isApprovedForAll(owner, _msgSenderERC721A())) { revert ApprovalCallerNotOwnerNorApproved(); } _tokenApprovals[tokenId] = to; emit Approval(owner, to, tokenId); } /** * @dev See {IERC721-getApproved}. */ function getApproved(uint256 tokenId) public view override returns (address) { if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken(); return _tokenApprovals[tokenId]; } /** * @dev See {IERC721-setApprovalForAll}. */ function setApprovalForAll(address operator, bool approved) public virtual override { if (operator == _msgSenderERC721A()) revert ApproveToCaller(); _operatorApprovals[_msgSenderERC721A()][operator] = approved; emit ApprovalForAll(_msgSenderERC721A(), operator, approved); } /** * @dev See {IERC721-isApprovedForAll}. */ function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) { return _operatorApprovals[owner][operator]; } /** * @dev See {IERC721-safeTransferFrom}. */ function safeTransferFrom( address from, address to, uint256 tokenId ) public virtual override { safeTransferFrom(from, to, tokenId, ''); } /** * @dev See {IERC721-safeTransferFrom}. */ function safeTransferFrom( address from, address to, uint256 tokenId, bytes memory _data ) public virtual override { transferFrom(from, to, tokenId); if (to.code.length != 0) if (!_checkContractOnERC721Received(from, to, tokenId, _data)) { revert TransferToNonERC721ReceiverImplementer(); } } /** * @dev Returns whether `tokenId` exists. * * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}. * * Tokens start existing when they are minted (`_mint`), */ function _exists(uint256 tokenId) internal view returns (bool) { return _startTokenId() <= tokenId && tokenId < _currentIndex && // If within bounds, _packedOwnerships[tokenId] & BITMASK_BURNED == 0; // and not burned. } /** * @dev Equivalent to `_safeMint(to, quantity, '')`. */ function _safeMint(address to, uint256 quantity) internal { _safeMint(to, quantity, ''); } /** * @dev Safely mints `quantity` tokens and transfers them to `to`. * * Requirements: * * - If `to` refers to a smart contract, it must implement * {IERC721Receiver-onERC721Received}, which is called for each safe transfer. * - `quantity` must be greater than 0. * * See {_mint}. * * Emits a {Transfer} event for each mint. */ function _safeMint( address to, uint256 quantity, bytes memory _data ) internal { _mint(to, quantity); unchecked { if (to.code.length != 0) { uint256 end = _currentIndex; uint256 index = end - quantity; do { if (!_checkContractOnERC721Received(address(0), to, index++, _data)) { revert TransferToNonERC721ReceiverImplementer(); } } while (index < end); // Reentrancy protection. if (_currentIndex != end) revert(); } } } /** * @dev Mints `quantity` tokens and transfers them to `to`. * * Requirements: * * - `to` cannot be the zero address. * - `quantity` must be greater than 0. * * Emits a {Transfer} event for each mint. */ function _mint(address to, uint256 quantity) internal { uint256 startTokenId = _currentIndex; if (to == address(0)) revert MintToZeroAddress(); if (quantity == 0) revert MintZeroQuantity(); _beforeTokenTransfers(address(0), to, startTokenId, quantity); // Overflows are incredibly unrealistic. // `balance` and `numberMinted` have a maximum limit of 2**64. // `tokenId` has a maximum limit of 2**256. unchecked { // Updates: // - `balance += quantity`. // - `numberMinted += quantity`. // // We can directly add to the `balance` and `numberMinted`. _packedAddressData[to] += quantity * ((1 << BITPOS_NUMBER_MINTED) | 1); // Updates: // - `address` to the owner. // - `startTimestamp` to the timestamp of minting. // - `burned` to `false`. // - `nextInitialized` to `quantity == 1`. _packedOwnerships[startTokenId] = _packOwnershipData( to, _nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0) ); uint256 tokenId = startTokenId; uint256 end = startTokenId + quantity; do { emit Transfer(address(0), to, tokenId++); } while (tokenId < end); _currentIndex = end; } _afterTokenTransfers(address(0), to, startTokenId, quantity); } /** * @dev Mints `quantity` tokens and transfers them to `to`. * * This function is intended for efficient minting only during contract creation. * * It emits only one {ConsecutiveTransfer} as defined in * [ERC2309](https://eips.ethereum.org/EIPS/eip-2309), * instead of a sequence of {Transfer} event(s). * * Calling this function outside of contract creation WILL make your contract * non-compliant with the ERC721 standard. * For full ERC721 compliance, substituting ERC721 {Transfer} event(s) with the ERC2309 * {ConsecutiveTransfer} event is only permissible during contract creation. * * Requirements: * * - `to` cannot be the zero address. * - `quantity` must be greater than 0. * * Emits a {ConsecutiveTransfer} event. */ function _mintERC2309(address to, uint256 quantity) internal { uint256 startTokenId = _currentIndex; if (to == address(0)) revert MintToZeroAddress(); if (quantity == 0) revert MintZeroQuantity(); if (quantity > MAX_MINT_ERC2309_QUANTITY_LIMIT) revert MintERC2309QuantityExceedsLimit(); _beforeTokenTransfers(address(0), to, startTokenId, quantity); // Overflows are unrealistic due to the above check for `quantity` to be below the limit. unchecked { // Updates: // - `balance += quantity`. // - `numberMinted += quantity`. // // We can directly add to the `balance` and `numberMinted`. _packedAddressData[to] += quantity * ((1 << BITPOS_NUMBER_MINTED) | 1); // Updates: // - `address` to the owner. // - `startTimestamp` to the timestamp of minting. // - `burned` to `false`. // - `nextInitialized` to `quantity == 1`. _packedOwnerships[startTokenId] = _packOwnershipData( to, _nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0) ); emit ConsecutiveTransfer(startTokenId, startTokenId + quantity - 1, address(0), to); _currentIndex = startTokenId + quantity; } _afterTokenTransfers(address(0), to, startTokenId, quantity); } /** * @dev Returns the storage slot and value for the approved address of `tokenId`. */ function _getApprovedAddress(uint256 tokenId) private view returns (uint256 approvedAddressSlot, address approvedAddress) { mapping(uint256 => address) storage tokenApprovalsPtr = _tokenApprovals; // The following is equivalent to `approvedAddress = _tokenApprovals[tokenId]`. assembly { // Compute the slot. mstore(0x00, tokenId) mstore(0x20, tokenApprovalsPtr.slot) approvedAddressSlot := keccak256(0x00, 0x40) // Load the slot's value from storage. approvedAddress := sload(approvedAddressSlot) } } /** * @dev Returns whether the `approvedAddress` is equals to `from` or `msgSender`. */ function _isOwnerOrApproved( address approvedAddress, address from, address msgSender ) private pure returns (bool result) { assembly { // Mask `from` to the lower 160 bits, in case the upper bits somehow aren't clean. from := and(from, BITMASK_ADDRESS) // Mask `msgSender` to the lower 160 bits, in case the upper bits somehow aren't clean. msgSender := and(msgSender, BITMASK_ADDRESS) // `msgSender == from || msgSender == approvedAddress`. result := or(eq(msgSender, from), eq(msgSender, approvedAddress)) } } /** * @dev Transfers `tokenId` from `from` to `to`. * * Requirements: * * - `to` cannot be the zero address. * - `tokenId` token must be owned by `from`. * * Emits a {Transfer} event. */ function transferFrom( address from, address to, uint256 tokenId ) public virtual override { uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId); if (address(uint160(prevOwnershipPacked)) != from) revert TransferFromIncorrectOwner(); (uint256 approvedAddressSlot, address approvedAddress) = _getApprovedAddress(tokenId); // The nested ifs save around 20+ gas over a compound boolean condition. if (!_isOwnerOrApproved(approvedAddress, from, _msgSenderERC721A())) if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved(); if (to == address(0)) revert TransferToZeroAddress(); _beforeTokenTransfers(from, to, tokenId, 1); // Clear approvals from the previous owner. assembly { if approvedAddress { // This is equivalent to `delete _tokenApprovals[tokenId]`. sstore(approvedAddressSlot, 0) } } // Underflow of the sender's balance is impossible because we check for // ownership above and the recipient's balance can't realistically overflow. // Counter overflow is incredibly unrealistic as tokenId would have to be 2**256. unchecked { // We can directly increment and decrement the balances. --_packedAddressData[from]; // Updates: `balance -= 1`. ++_packedAddressData[to]; // Updates: `balance += 1`. // Updates: // - `address` to the next owner. // - `startTimestamp` to the timestamp of transfering. // - `burned` to `false`. // - `nextInitialized` to `true`. _packedOwnerships[tokenId] = _packOwnershipData( to, BITMASK_NEXT_INITIALIZED | _nextExtraData(from, to, prevOwnershipPacked) ); // If the next slot may not have been initialized (i.e. `nextInitialized == false`) . if (prevOwnershipPacked & BITMASK_NEXT_INITIALIZED == 0) { uint256 nextTokenId = tokenId + 1; // If the next slot's address is zero and not burned (i.e. packed value is zero). if (_packedOwnerships[nextTokenId] == 0) { // If the next slot is within bounds. if (nextTokenId != _currentIndex) { // Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`. _packedOwnerships[nextTokenId] = prevOwnershipPacked; } } } } emit Transfer(from, to, tokenId); _afterTokenTransfers(from, to, tokenId, 1); } /** * @dev Equivalent to `_burn(tokenId, false)`. */ function _burn(uint256 tokenId) internal virtual { _burn(tokenId, false); } /** * @dev Destroys `tokenId`. * The approval is cleared when the token is burned. * * Requirements: * * - `tokenId` must exist. * * Emits a {Transfer} event. */ function _burn(uint256 tokenId, bool approvalCheck) internal virtual { uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId); address from = address(uint160(prevOwnershipPacked)); (uint256 approvedAddressSlot, address approvedAddress) = _getApprovedAddress(tokenId); if (approvalCheck) { // The nested ifs save around 20+ gas over a compound boolean condition. if (!_isOwnerOrApproved(approvedAddress, from, _msgSenderERC721A())) if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved(); } _beforeTokenTransfers(from, address(0), tokenId, 1); // Clear approvals from the previous owner. assembly { if approvedAddress { // This is equivalent to `delete _tokenApprovals[tokenId]`. sstore(approvedAddressSlot, 0) } } // Underflow of the sender's balance is impossible because we check for // ownership above and the recipient's balance can't realistically overflow. // Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256. unchecked { // Updates: // - `balance -= 1`. // - `numberBurned += 1`. // // We can directly decrement the balance, and increment the number burned. // This is equivalent to `packed -= 1; packed += 1 << BITPOS_NUMBER_BURNED;`. _packedAddressData[from] += (1 << BITPOS_NUMBER_BURNED) - 1; // Updates: // - `address` to the last owner. // - `startTimestamp` to the timestamp of burning. // - `burned` to `true`. // - `nextInitialized` to `true`. _packedOwnerships[tokenId] = _packOwnershipData( from, (BITMASK_BURNED | BITMASK_NEXT_INITIALIZED) | _nextExtraData(from, address(0), prevOwnershipPacked) ); // If the next slot may not have been initialized (i.e. `nextInitialized == false`) . if (prevOwnershipPacked & BITMASK_NEXT_INITIALIZED == 0) { uint256 nextTokenId = tokenId + 1; // If the next slot's address is zero and not burned (i.e. packed value is zero). if (_packedOwnerships[nextTokenId] == 0) { // If the next slot is within bounds. if (nextTokenId != _currentIndex) { // Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`. _packedOwnerships[nextTokenId] = prevOwnershipPacked; } } } } emit Transfer(from, address(0), tokenId); _afterTokenTransfers(from, address(0), tokenId, 1); // Overflow not possible, as _burnCounter cannot be exceed _currentIndex times. unchecked { _burnCounter++; } } /** * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target contract. * * @param from address representing the previous owner of the given token ID * @param to target address that will receive the tokens * @param tokenId uint256 ID of the token to be transferred * @param _data bytes optional data to send along with the call * @return bool whether the call correctly returned the expected magic value */ function _checkContractOnERC721Received( address from, address to, uint256 tokenId, bytes memory _data ) private returns (bool) { try ERC721A__IERC721Receiver(to).onERC721Received(_msgSenderERC721A(), from, tokenId, _data) returns ( bytes4 retval ) { return retval == ERC721A__IERC721Receiver(to).onERC721Received.selector; } catch (bytes memory reason) { if (reason.length == 0) { revert TransferToNonERC721ReceiverImplementer(); } else { assembly { revert(add(32, reason), mload(reason)) } } } } /** * @dev Directly sets the extra data for the ownership data `index`. */ function _setExtraDataAt(uint256 index, uint24 extraData) internal { uint256 packed = _packedOwnerships[index]; if (packed == 0) revert OwnershipNotInitializedForExtraData(); uint256 extraDataCasted; // Cast `extraData` with assembly to avoid redundant masking. assembly { extraDataCasted := extraData } packed = (packed & BITMASK_EXTRA_DATA_COMPLEMENT) | (extraDataCasted << BITPOS_EXTRA_DATA); _packedOwnerships[index] = packed; } /** * @dev Returns the next extra data for the packed ownership data. * The returned result is shifted into position. */ function _nextExtraData( address from, address to, uint256 prevOwnershipPacked ) private view returns (uint256) { uint24 extraData = uint24(prevOwnershipPacked >> BITPOS_EXTRA_DATA); return uint256(_extraData(from, to, extraData)) << BITPOS_EXTRA_DATA; } /** * @dev Called during each token transfer to set the 24bit `extraData` field. * Intended to be overridden by the cosumer contract. * * `previousExtraData` - the value of `extraData` before transfer. * * Calling conditions: * * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be * transferred to `to`. * - When `from` is zero, `tokenId` will be minted for `to`. * - When `to` is zero, `tokenId` will be burned by `from`. * - `from` and `to` are never both zero. */ function _extraData( address from, address to, uint24 previousExtraData ) internal view virtual returns (uint24) {} /** * @dev Hook that is called before a set of serially-ordered token ids are about to be transferred. * This includes minting. * And also called before burning one token. * * startTokenId - the first token id to be transferred * quantity - the amount to be transferred * * Calling conditions: * * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be * transferred to `to`. * - When `from` is zero, `tokenId` will be minted for `to`. * - When `to` is zero, `tokenId` will be burned by `from`. * - `from` and `to` are never both zero. */ function _beforeTokenTransfers( address from, address to, uint256 startTokenId, uint256 quantity ) internal virtual {} /** * @dev Hook that is called after a set of serially-ordered token ids have been transferred. * This includes minting. * And also called after one token has been burned. * * startTokenId - the first token id to be transferred * quantity - the amount to be transferred * * Calling conditions: * * - When `from` and `to` are both non-zero, `from`'s `tokenId` has been * transferred to `to`. * - When `from` is zero, `tokenId` has been minted for `to`. * - When `to` is zero, `tokenId` has been burned by `from`. * - `from` and `to` are never both zero. */ function _afterTokenTransfers( address from, address to, uint256 startTokenId, uint256 quantity ) internal virtual {} /** * @dev Returns the message sender (defaults to `msg.sender`). * * If you are writing GSN compatible contracts, you need to override this function. */ function _msgSenderERC721A() internal view virtual returns (address) { return msg.sender; } /** * @dev Converts a `uint256` to its ASCII `string` decimal representation. */ function _toString(uint256 value) internal pure returns (string memory ptr) { assembly { // The maximum value of a uint256 contains 78 digits (1 byte per digit), // but we allocate 128 bytes to keep the free memory pointer 32-byte word aliged. // We will need 1 32-byte word to store the length, // and 3 32-byte words to store a maximum of 78 digits. Total: 32 + 3 * 32 = 128. ptr := add(mload(0x40), 128) // Update the free memory pointer to allocate. mstore(0x40, ptr) // Cache the end of the memory to calculate the length later. let end := ptr // We write the string from the rightmost digit to the leftmost digit. // The following is essentially a do-while loop that also handles the zero case. // Costs a bit more than early returning for the zero case, // but cheaper in terms of deployment and overall runtime costs. for { // Initialize and perform the first pass without check. let temp := value // Move the pointer 1 byte leftwards to point to an empty character slot. ptr := sub(ptr, 1) // Write the character to the pointer. 48 is the ASCII index of '0'. mstore8(ptr, add(48, mod(temp, 10))) temp := div(temp, 10) } temp { // Keep dividing `temp` until zero. temp := div(temp, 10) } { // Body of the for loop. ptr := sub(ptr, 1) mstore8(ptr, add(48, mod(temp, 10))) } let length := sub(end, ptr) // Move the pointer 32 bytes leftwards to make room for the length. ptr := sub(ptr, 32) // Store the length. mstore(ptr, length) } } } // File: erc721a/contracts/extensions/IERC721AQueryable.sol // ERC721A Contracts v4.1.0 // Creator: Chiru Labs pragma solidity ^0.8.4; /** * @dev Interface of an ERC721AQueryable compliant contract. */ interface IERC721AQueryable is IERC721A { /** * Invalid query range (`start` >= `stop`). */ error InvalidQueryRange(); /** * @dev Returns the `TokenOwnership` struct at `tokenId` without reverting. * * If the `tokenId` is out of bounds: * - `addr` = `address(0)` * - `startTimestamp` = `0` * - `burned` = `false` * * If the `tokenId` is burned: * - `addr` = `
` * - `startTimestamp` = `` * - `burned = `true` * * Otherwise: * - `addr` = `
` * - `startTimestamp` = `` * - `burned = `false` */ function explicitOwnershipOf(uint256 tokenId) external view returns (TokenOwnership memory); /** * @dev Returns an array of `TokenOwnership` structs at `tokenIds` in order. * See {ERC721AQueryable-explicitOwnershipOf} */ function explicitOwnershipsOf(uint256[] memory tokenIds) external view returns (TokenOwnership[] memory); /** * @dev Returns an array of token IDs owned by `owner`, * in the range [`start`, `stop`) * (i.e. `start <= tokenId < stop`). * * This function allows for tokens to be queried if the collection * grows too big for a single call of {ERC721AQueryable-tokensOfOwner}. * * Requirements: * * - `start` < `stop` */ function tokensOfOwnerIn( address owner, uint256 start, uint256 stop ) external view returns (uint256[] memory); /** * @dev Returns an array of token IDs owned by `owner`. * * This function scans the ownership mapping and is O(totalSupply) in complexity. * It is meant to be called off-chain. * * See {ERC721AQueryable-tokensOfOwnerIn} for splitting the scan into * multiple smaller scans if the collection is large enough to cause * an out-of-gas error (10K pfp collections should be fine). */ function tokensOfOwner(address owner) external view returns (uint256[] memory); } // File: erc721a/contracts/extensions/ERC721AQueryable.sol // ERC721A Contracts v4.1.0 // Creator: Chiru Labs pragma solidity ^0.8.4; /** * @title ERC721A Queryable * @dev ERC721A subclass with convenience query functions. */ abstract contract ERC721AQueryable is ERC721A, IERC721AQueryable { /** * @dev Returns the `TokenOwnership` struct at `tokenId` without reverting. * * If the `tokenId` is out of bounds: * - `addr` = `address(0)` * - `startTimestamp` = `0` * - `burned` = `false` * - `extraData` = `0` * * If the `tokenId` is burned: * - `addr` = `
` * - `startTimestamp` = `` * - `burned = `true` * - `extraData` = `` * * Otherwise: * - `addr` = `
` * - `startTimestamp` = `` * - `burned = `false` * - `extraData` = `` */ function explicitOwnershipOf(uint256 tokenId) public view override returns (TokenOwnership memory) { TokenOwnership memory ownership; if (tokenId < _startTokenId() || tokenId >= _nextTokenId()) { return ownership; } ownership = _ownershipAt(tokenId); if (ownership.burned) { return ownership; } return _ownershipOf(tokenId); } /** * @dev Returns an array of `TokenOwnership` structs at `tokenIds` in order. * See {ERC721AQueryable-explicitOwnershipOf} */ function explicitOwnershipsOf(uint256[] memory tokenIds) external view override returns (TokenOwnership[] memory) { unchecked { uint256 tokenIdsLength = tokenIds.length; TokenOwnership[] memory ownerships = new TokenOwnership[](tokenIdsLength); for (uint256 i; i != tokenIdsLength; ++i) { ownerships[i] = explicitOwnershipOf(tokenIds[i]); } return ownerships; } } /** * @dev Returns an array of token IDs owned by `owner`, * in the range [`start`, `stop`) * (i.e. `start <= tokenId < stop`). * * This function allows for tokens to be queried if the collection * grows too big for a single call of {ERC721AQueryable-tokensOfOwner}. * * Requirements: * * - `start` < `stop` */ function tokensOfOwnerIn( address owner, uint256 start, uint256 stop ) external view override returns (uint256[] memory) { unchecked { if (start >= stop) revert InvalidQueryRange(); uint256 tokenIdsIdx; uint256 stopLimit = _nextTokenId(); // Set `start = max(start, _startTokenId())`. if (start < _startTokenId()) { start = _startTokenId(); } // Set `stop = min(stop, stopLimit)`. if (stop > stopLimit) { stop = stopLimit; } uint256 tokenIdsMaxLength = balanceOf(owner); // Set `tokenIdsMaxLength = min(balanceOf(owner), stop - start)`, // to cater for cases where `balanceOf(owner)` is too big. if (start < stop) { uint256 rangeLength = stop - start; if (rangeLength < tokenIdsMaxLength) { tokenIdsMaxLength = rangeLength; } } else { tokenIdsMaxLength = 0; } uint256[] memory tokenIds = new uint256[](tokenIdsMaxLength); if (tokenIdsMaxLength == 0) { return tokenIds; } // We need to call `explicitOwnershipOf(start)`, // because the slot at `start` may not be initialized. TokenOwnership memory ownership = explicitOwnershipOf(start); address currOwnershipAddr; // If the starting slot exists (i.e. not burned), initialize `currOwnershipAddr`. // `ownership.address` will not be zero, as `start` is clamped to the valid token ID range. if (!ownership.burned) { currOwnershipAddr = ownership.addr; } for (uint256 i = start; i != stop && tokenIdsIdx != tokenIdsMaxLength; ++i) { ownership = _ownershipAt(i); if (ownership.burned) { continue; } if (ownership.addr != address(0)) { currOwnershipAddr = ownership.addr; } if (currOwnershipAddr == owner) { tokenIds[tokenIdsIdx++] = i; } } // Downsize the array to fit. assembly { mstore(tokenIds, tokenIdsIdx) } return tokenIds; } } /** * @dev Returns an array of token IDs owned by `owner`. * * This function scans the ownership mapping and is O(totalSupply) in complexity. * It is meant to be called off-chain. * * See {ERC721AQueryable-tokensOfOwnerIn} for splitting the scan into * multiple smaller scans if the collection is large enough to cause * an out-of-gas error (10K pfp collections should be fine). */ function tokensOfOwner(address owner) external view override returns (uint256[] memory) { unchecked { uint256 tokenIdsIdx; address currOwnershipAddr; uint256 tokenIdsLength = balanceOf(owner); uint256[] memory tokenIds = new uint256[](tokenIdsLength); TokenOwnership memory ownership; for (uint256 i = _startTokenId(); tokenIdsIdx != tokenIdsLength; ++i) { ownership = _ownershipAt(i); if (ownership.burned) { continue; } if (ownership.addr != address(0)) { currOwnershipAddr = ownership.addr; } if (currOwnershipAddr == owner) { tokenIds[tokenIdsIdx++] = i; } } return tokenIds; } } } // File: contracts/test.sol pragma solidity >=0.8.9 <0.9.0; contract Y00tT00bs is ERC721AQueryable, Ownable, ReentrancyGuard { using Strings for uint256; uint256 public maxSupply = 3000; uint256 public Ownermint = 5; uint256 public maxPerAddress = 100; uint256 public maxPerTX = 20; uint256 public cost = 0.001 ether; mapping(address => bool) public freeMinted; bool public paused = true; bool public revealed = false; string public uriPrefix = ''; string public uriSuffix = '.json'; string public hiddenURI = ''; constructor(string memory baseURI) ERC721A("Y00t T00bs", "YoT00b") { sethiddenURI(baseURI); _safeMint(_msgSender(), Ownermint); } modifier callerIsUser() { require(tx.origin == msg.sender, "The caller is another contract"); _; } function numberMinted(address owner) public view returns (uint256) { return _numberMinted(owner); } function mint(uint256 _mintAmount) public payable nonReentrant callerIsUser{ require(!paused, 'The contract is paused!'); require(numberMinted(msg.sender) + _mintAmount <= maxPerAddress, 'PER_WALLET_LIMIT_REACHED'); require(_mintAmount > 0 && _mintAmount <= maxPerTX, 'Invalid mint amount!'); require(totalSupply() + _mintAmount <= (maxSupply), 'Max supply exceeded!'); if (freeMinted[_msgSender()]){ require(msg.value >= cost * _mintAmount, 'Insufficient funds!'); } else{ require(msg.value >= cost * _mintAmount - cost, 'Insufficient funds!'); freeMinted[_msgSender()] = true; } _safeMint(_msgSender(), _mintAmount); } function tokenURI(uint256 _tokenId) public view virtual override returns (string memory) { require(_exists(_tokenId), 'ERC721Metadata: URI query for nonexistent token'); if (!revealed) { return hiddenURI; } string memory currentBaseURI = _baseURI(); return bytes(currentBaseURI).length > 0 ? string(abi.encodePacked(currentBaseURI, _tokenId.toString(), uriSuffix)) : ''; } function setPaused() public onlyOwner { paused = !paused; } function reveal() public onlyOwner { revealed = !revealed; } function setCost(uint256 _cost) public onlyOwner { cost = _cost; } function setmaxPerTX(uint256 _maxPerTX) public onlyOwner { maxPerTX = _maxPerTX; } function setUriPrefix(string memory _uriPrefix) public onlyOwner { uriPrefix = _uriPrefix; } function sethiddenURI(string memory _hiddenURI) public onlyOwner { hiddenURI = _hiddenURI; } function setUriSuffix(string memory _uriSuffix) public onlyOwner { uriSuffix = _uriSuffix; } function withdraw() external onlyOwner{ payable(msg.sender).transfer(address(this).balance); } // Internal -> function _startTokenId() internal view virtual override returns (uint256) { return 1; } function _baseURI() internal view virtual override returns (string memory) { return uriPrefix; } }