{
  "language": "Solidity",
  "sources": {
    "contracts/token.sol": {
      "content": "// SPDX-License-Identifier: MIT\n\nimport \"@openzeppelin/contracts-upgradeable/token/ERC20/ERC20Upgradeable.sol\";\nimport \"@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol\";\nimport \"@openzeppelin/contracts-upgradeable/utils/math/SafeMathUpgradeable.sol\";\nimport \"@openzeppelin/contracts-upgradeable/proxy/utils/UUPSUpgradeable.sol\";\n\nimport \"@openzeppelin/contracts/utils/math/SafeCast.sol\";\nimport \"@openzeppelin/contracts/utils/Address.sol\";\nimport \"./interfaces/IUniswapV2Pair.sol\";\nimport \"./interfaces/IUniswapV2Factory.sol\";\nimport \"./interfaces/IUniswapV2Router02.sol\";\n\npragma solidity >=0.8.0;\n\ncontract MWC is\n    ContextUpgradeable,\n    IERC20Upgradeable,\n    OwnableUpgradeable,\n    UUPSUpgradeable\n{\n    using SafeMathUpgradeable for uint256;\n    using AddressUpgradeable for address;\n    using SafeCast for int256;\n\n    string private _name;\n    string private _symbol;\n    uint8 private _decimals;\n\n    mapping(address => uint256) internal _reflectionBalance;\n    mapping(address => uint256) internal _tokenBalance;\n    mapping(address => mapping(address => uint256)) internal _allowances;\n\n    uint256 private MAX;\n    uint256 internal _tokenTotal;\n\n    uint256 internal _reflectionTotal;\n\n    mapping(address => bool) blacklist;\n    mapping(address => bool) isTaxless;\n    mapping(address => bool) internal _isExcluded;\n    address[] internal _excluded;\n\n    //all fees\n    uint256 public feeDecimal;\n    uint256 public sellFee;\n    uint256 public buyFee;\n    uint256 public redistributionFee;\n    uint256 public redistributionFeeTotal;\n    uint256 public liquidityFee;\n    uint256 public burnFee;\n    uint256 public totalFeePercentage;\n\n    uint256 public feeTotal;\n    \n    //@dev can be configured.\n    address public feeWallet;\n    address public developmentWallet;\n    address public burnWallet;\n    address public teamWallet;\n    address public admin;\n\n    bool private inSwapAndLiquify;\n    bool public swapAndLiquifyEnabled;\n    bool public isFeeActive; // should be true\n    uint256 public maxTxAmountPercentage;\n    uint256 public maxTxAmount; // 5%\n    uint256 public minTokensBeforeSwap;\n\n    bool public sellCooldownEnabled;\n\n    uint256 public listedAt;\n\n    mapping(address => uint256) public transferAmounts;\n    mapping(address => uint256) public lastSellCycleStart;\n    mapping(address => uint256) public sellCooldown;\n    uint256 public sellCooldownTime;\n    uint256 public sellCooldownAmount; // 0.05%\n\n    IUniswapV2Router02 public UniswapV2Router;\n    address public UniswapV2Pair;\n\n    event SwapAndLiquifyEnabledUpdated(bool enabled);\n    event txAmountPercentage(uint256 maxTxAmountPercentage);\n    event SwapAndLiquify(\n        uint256 tokensSwapped,\n        uint256 ethReceived,\n        uint256 tokensIntoLiquidity\n    );\n\n    modifier lockTheSwap() {\n        inSwapAndLiquify = true;\n        _;\n        inSwapAndLiquify = false;\n    }\n\n    modifier onlyOwnerAndAdmin() {\n        require(\n            owner() == _msgSender() || _msgSender() == admin,\n            \"Ownable: caller is not the owner or admin\"\n        );\n        _;\n    }\n\n    function initialize(\n        address _router,\n        string memory name_,\n        string memory symbol_,\n        uint8 decimals_\n    ) public initializer {\n        __Ownable_init();\n        __UUPSUpgradeable_init();\n        IUniswapV2Router02 _UniswapV2Router = IUniswapV2Router02(_router);\n\n        UniswapV2Router = _UniswapV2Router;\n\n        address _owner = _msgSender();\n        admin = _msgSender();\n        teamWallet = _msgSender();\n\n        _name = name_;\n        _symbol = symbol_;\n        _decimals = decimals_;\n\n        MAX = ~uint256(0);\n        _tokenTotal = 900_000_000e18;\n        _reflectionTotal = (MAX - (MAX % _tokenTotal));\n\n        isTaxless[_owner] = true;\n        isTaxless[teamWallet] = true;\n\n        feeDecimal = 2;\n        redistributionFee = 0;\n        sellFee = 700;\n        buyFee = 300;\n        liquidityFee = 0;\n        burnFee = 0;\n        totalFeePercentage=0;\n        feeTotal =0;\n        redistributionFeeTotal =0;\n        feeWallet = address(0);\n        developmentWallet = address(0);\n        burnWallet = 0x000000000000000000000000000000000000dEaD;\n        swapAndLiquifyEnabled = true;\n        isFeeActive = true;\n        maxTxAmountPercentage = 500;\n        maxTxAmount = _tokenTotal.mul(maxTxAmountPercentage).div(10000);\n        minTokensBeforeSwap = 100e18;\n        sellCooldownEnabled = true;\n        sellCooldownTime = 10 minutes;\n        sellCooldownAmount = _tokenTotal.mul(5).div(10000);\n\n        _isExcluded[UniswapV2Pair] = true;\n        _excluded.push(UniswapV2Pair);\n\n        _reflectionBalance[_owner] = _reflectionTotal;\n        _tokenBalance[_owner] = _tokenTotal;\n        setUniswapV2Pair();\n        emit Transfer(address(0), _owner, _tokenTotal);\n\n        transferOwnership(_owner);\n    }\n\n    function _authorizeUpgrade(address newImplementation)\n        internal\n        override\n        onlyOwnerAndAdmin\n    {}\n\n    function setUniswapV2Pair() private {\n        UniswapV2Pair = IUniswapV2Factory(UniswapV2Router.factory()).createPair(\n                address(this),\n                UniswapV2Router.WETH()\n            );\n        _isExcluded[UniswapV2Pair] = true;\n        _excluded.push(UniswapV2Pair);\n    }\n\n    function name() public view returns (string memory) {\n        return _name;\n    }\n\n    function symbol() public view returns (string memory) {\n        return _symbol;\n    }\n\n    function decimals() public view returns (uint8) {\n        return _decimals;\n    }\n\n    function totalSupply() public view override returns (uint256) {\n        return _tokenTotal;\n    }\n\n    function balanceOf(address account) public view override returns (uint256) {\n        if (_isExcluded[account]) return _tokenBalance[account];\n        return tokenFromReflection(_reflectionBalance[account]);\n    }\n\n    function transfer(address recipient, uint256 amount)\n        public\n        virtual\n        override\n        returns (bool)\n    {\n        _transfer(_msgSender(), recipient, amount);\n        return true;\n    }\n\n    function allowance(address _owner, address _spender)\n        public\n        view\n        override\n        returns (uint256)\n    {\n        return _allowances[_owner][_spender];\n    }\n\n    function approve(address spender, uint256 amount)\n        public\n        override\n        returns (bool)\n    {\n        _approve(_msgSender(), spender, amount);\n        return true;\n    }\n\n    function transferFrom(\n        address sender,\n        address recipient,\n        uint256 amount\n    ) public virtual override returns (bool) {\n        _transfer(sender, recipient, amount);\n\n        _approve(\n            sender,\n            _msgSender(),\n            _allowances[sender][_msgSender()].sub(\n                amount,\n                \"ERC20: transfer amount exceeds allowance\"\n            )\n        );\n        return true;\n    }\n\n    function increaseAllowance(address spender, uint256 addedValue)\n        public\n        virtual\n        returns (bool)\n    {\n        _approve(\n            _msgSender(),\n            spender,\n            _allowances[_msgSender()][spender].add(addedValue)\n        );\n        return true;\n    }\n\n    function decreaseAllowance(address spender, uint256 subtractedValue)\n        public\n        virtual\n        returns (bool)\n    {\n        _approve(\n            _msgSender(),\n            spender,\n            _allowances[_msgSender()][spender].sub(\n                subtractedValue,\n                \"ERC20: decreased allowance below zero\"\n            )\n        );\n        return true;\n    }\n\n    function isExcluded(address account) public view returns (bool) {\n        return _isExcluded[account];\n    }\n\n    function reflectionFromToken(uint256 tokenAmount)\n        public\n        view\n        returns (uint256)\n    {\n        require(tokenAmount <= _tokenTotal, \"Amount must be less than supply\");\n        return tokenAmount.mul(_getReflectionRate());\n    }\n\n    function tokenFromReflection(uint256 reflectionAmount)\n        public\n        view\n        returns (uint256)\n    {\n        require(\n            reflectionAmount <= _reflectionTotal,\n            \"Amount must be less than total reflections\"\n        );\n        return reflectionAmount.div(_getReflectionRate());\n    }\n\n    function excludeAccount(address account) external onlyOwnerAndAdmin {\n        require(\n            account != address(UniswapV2Router),\n            \"TOKEN: We can not exclude swap router.\"\n        );\n\n        require(!_isExcluded[account], \"TOKEN: Account is already excluded\");\n        if (_reflectionBalance[account] > 0) {\n            _tokenBalance[account] = tokenFromReflection(\n                _reflectionBalance[account]\n            );\n        }\n        _isExcluded[account] = true;\n        _excluded.push(account);\n    }\n\n    function includeAccount(address account) external onlyOwnerAndAdmin {\n        require(_isExcluded[account], \"TOKEN: Account is already included\");\n        for (uint256 i = 0; i < _excluded.length; i++) {\n            if (_excluded[i] == account) {\n                _excluded[i] = _excluded[_excluded.length - 1];\n                _tokenBalance[account] = 0;\n                _isExcluded[account] = false;\n                _excluded.pop();\n                break;\n            }\n        }\n    }\n\n    function excludeAccounts(address[] memory accounts)\n        external\n        onlyOwnerAndAdmin\n    {\n        require(accounts.length < 10, \"accounts length must be less then 10\");\n\n        for (uint256 i = 0; i < accounts.length; i++) {\n            require(\n                accounts[i] != address(UniswapV2Router),\n                \"TOKEN: We can not exclude swap router.\"\n            );\n            require(\n                !_isExcluded[accounts[i]],\n                \"TOKEN: Account is already excluded\"\n            );\n            if (_reflectionBalance[accounts[i]] > 0) {\n                _tokenBalance[accounts[i]] = tokenFromReflection(\n                    _reflectionBalance[accounts[i]]\n                );\n            }\n            _isExcluded[accounts[i]] = true;\n            _excluded.push(accounts[i]);\n        }\n    }\n\n    function includeAccounts(address[] memory accounts)\n        external\n        onlyOwnerAndAdmin\n    {\n        require(accounts.length < 10, \"accounts length must be less then 10\");\n\n        for (uint256 i = 0; i < accounts.length; i++) {\n            require(\n                _isExcluded[accounts[i]],\n                \"TOKEN: Account is already included\"\n            );\n            for (uint256 j = 0; j < _excluded.length; j++) {\n                if (_excluded[j] == accounts[i]) {\n                    _excluded[j] = _excluded[_excluded.length - 1];\n                    _tokenBalance[accounts[i]] = 0;\n                    _isExcluded[accounts[i]] = false;\n                    _excluded.pop();\n                    break;\n                }\n            }\n        }\n    }\n\n    function _approve(\n        address _owner,\n        address _spender,\n        uint256 _amount\n    ) private {\n        require(_owner != address(0), \"ERC20: approve from the zero address\");\n        require(_spender != address(0), \"ERC20: approve to the zero address\");\n\n        _allowances[_owner][_spender] = _amount;\n        emit Approval(_owner, _spender, _amount);\n    }\n\n    function _transfer(\n        address sender,\n        address recipient,\n        uint256 amount\n    ) private {\n        require(sender != address(0), \"ERC20: transfer from the zero address\");\n        require(recipient != address(0), \"ERC20: transfer to the zero address\");\n        require(amount > 0, \"Transfer amount must be greater than zero\");\n\n        require(\n            isTaxless[sender] || isTaxless[recipient] || amount <= maxTxAmount,\n            \"Max Transfer Limit Exceeds!\"\n        );\n\n        require(!blacklist[sender], \"Banned!\");\n\n        require(\n            listedAt != 0 || isTaxless[sender] || isTaxless[recipient],\n            \"Not Listed yet!\"\n        );\n\n        if (\n            !isTaxless[sender] &&\n            !isTaxless[recipient] &&\n            listedAt + 3 minutes >= block.timestamp\n        ) {\n            // don't allow to buy more than 0.01% of total supply for 3 minutes after launch\n            require(\n                sender != UniswapV2Pair ||\n                    balanceOf(recipient).add(amount) <= _tokenTotal.div(10000),\n                \"AntiBot: Buy Banned!\"\n            );\n            if (listedAt + 180 seconds >= block.timestamp)\n                // don't allow sell for 180 seconds after launch\n                require(recipient != UniswapV2Pair, \"AntiBot: Sell Banned!\");\n        }\n\n        if (\n            sellCooldownEnabled &&\n            recipient == UniswapV2Pair &&\n            !isTaxless[sender]\n        ) {\n            require(\n                sellCooldown[sender] < block.timestamp,\n                \"Err: Sell Cooldown\"\n            );\n            if (\n                lastSellCycleStart[sender] + sellCooldownTime < block.timestamp\n            ) {\n                lastSellCycleStart[sender] = block.timestamp;\n                transferAmounts[sender] = 0;\n            }\n            transferAmounts[sender] = transferAmounts[sender].add(amount);\n            if (transferAmounts[sender] >= sellCooldownAmount) {\n                sellCooldown[sender] = block.timestamp + sellCooldownTime;\n            }\n        }\n\n        uint256 transferAmount = amount;\n        uint256 rate = _getReflectionRate();\n\n        //swapAndLiquify\n        uint256 contractTokenBalance = balanceOf(address(this));\n        if (\n            swapAndLiquifyEnabled &&\n            !inSwapAndLiquify &&\n            sender != UniswapV2Pair &&\n            contractTokenBalance >= minTokensBeforeSwap\n        ) {\n            swapAndLiquify(contractTokenBalance);\n        }\n\n        if (\n            isFeeActive &&\n            !isTaxless[sender] &&\n            !isTaxless[recipient] &&\n            !inSwapAndLiquify\n        ) {\n            transferAmount = collectFee(sender, recipient, amount, rate);\n        }\n\n        //transfer reflection\n        _reflectionBalance[sender] = _reflectionBalance[sender].sub(\n            amount.mul(rate)\n        );\n        _reflectionBalance[recipient] = _reflectionBalance[recipient].add(\n            transferAmount.mul(rate)\n        );\n\n        //if any account belongs to the excludedAccount transfer token\n        if (_isExcluded[sender]) {\n            _tokenBalance[sender] = _tokenBalance[sender].sub(amount);\n        }\n        if (_isExcluded[recipient]) {\n            _tokenBalance[recipient] = _tokenBalance[recipient].add(\n                transferAmount\n            );\n        }\n\n        emit Transfer(sender, recipient, transferAmount);\n    }\n\n    // On Sell 2% Redistribute To All Holders\n    // On Sell 3% fee auto add to the liquidity pool.\n    // On Sell 1% fee auto moved to Burn wallet\n    // On Sell 3% fee auto moved to Performance wallet\n    function collectFee(\n        address account,\n        address to,\n        uint256 amount,\n        uint256 rate\n    ) private returns (uint256) {\n        uint256 transferAmount = amount;\n        //This 2% fee is applicable when the  contract is going to reward to the token holders.\n        if (to == UniswapV2Pair) {\n            if (redistributionFee != 0) {\n                uint256 _redistributionFee = amount.mul(redistributionFee).div(\n                    10**(feeDecimal + 2)\n                );\n                transferAmount = transferAmount.sub(_redistributionFee);\n                _reflectionTotal = _reflectionTotal.sub(\n                    _redistributionFee.mul(rate)\n                );\n                redistributionFeeTotal = redistributionFeeTotal.add(_redistributionFee);\n                //emit Transfer(account, distributionWallet, _taxFee);\n            }\n            // @dev liquidity fee 3% On sale\n            if (liquidityFee != 0) {\n                uint256 _liquidityFee = amount.mul(liquidityFee).div(\n                    10**(feeDecimal + 2)\n                );\n                transferAmount = transferAmount.sub(_liquidityFee);\n                _reflectionBalance[address(this)] = _reflectionBalance[\n                    address(this)\n                ].add(_liquidityFee.mul(rate));\n                if (_isExcluded[address(this)]) {\n                    _tokenBalance[address(this)] = _tokenBalance[address(this)]\n                        .add(_liquidityFee);\n                }\n                feeTotal = feeTotal.add(_liquidityFee);\n                emit Transfer(account, address(this), _liquidityFee);\n            }\n            if (sellFee != 0) {\n                uint256 _sellFee = amount.mul(sellFee).div(\n                    10**(feeDecimal + 2)\n                );\n                transferAmount = transferAmount.sub(_sellFee);\n                _reflectionBalance[feeWallet] = _reflectionBalance[feeWallet]\n                    .add(_sellFee.mul(rate));\n                if (_isExcluded[feeWallet]) {\n                    _tokenBalance[feeWallet] = _tokenBalance[feeWallet].add(\n                        _sellFee\n                    );\n                }\n                feeTotal = feeTotal.add(_sellFee);\n                emit Transfer(account, feeWallet, _sellFee);\n            }\n\n            // @dev burn fee 1 on Sale\n            if (burnFee != 0) {\n                uint256 _burnFee = amount.mul(burnFee).div(\n                    10**(feeDecimal + 2)\n                );\n                transferAmount = transferAmount.sub(_burnFee);\n                _reflectionBalance[burnWallet] = _reflectionBalance[burnWallet]\n                    .add(_burnFee.mul(rate));\n                emit Transfer(account, burnWallet, _burnFee);\n            }\n        }\n        // @buy  fee 3%\n        if (buyFee != 0 && account == UniswapV2Pair) {\n            uint256 _buyFee = amount.mul(buyFee).div(10**(feeDecimal + 2));\n            transferAmount = transferAmount.sub(_buyFee);\n            _reflectionBalance[feeWallet] = _reflectionBalance[feeWallet].add(\n                _buyFee.mul(rate)\n            );\n            feeTotal = feeTotal.add(_buyFee);\n            emit Transfer(account, feeWallet, _buyFee);\n        }\n\n        return transferAmount;\n    }\n\n    function _getReflectionRate() private view returns (uint256) {\n        uint256 reflectionSupply = _reflectionTotal;\n        uint256 tokenSupply = _tokenTotal;\n        for (uint256 i = 0; i < _excluded.length; i++) {\n            if (\n                _reflectionBalance[_excluded[i]] > reflectionSupply ||\n                _tokenBalance[_excluded[i]] > tokenSupply\n            ) return _reflectionTotal.div(_tokenTotal);\n            reflectionSupply = reflectionSupply.sub(\n                _reflectionBalance[_excluded[i]]\n            );\n            tokenSupply = tokenSupply.sub(_tokenBalance[_excluded[i]]);\n        }\n        if (reflectionSupply < _reflectionTotal.div(_tokenTotal))\n            return _reflectionTotal.div(_tokenTotal);\n        return reflectionSupply.div(tokenSupply);\n    }\n\n    function swapAndLiquify(uint256 contractTokenBalance) private lockTheSwap {\n        if (contractTokenBalance > maxTxAmount)\n            contractTokenBalance = maxTxAmount;\n\n        // split the contract balance into halves\n        uint256 half = contractTokenBalance.div(2);\n        uint256 otherHalf = contractTokenBalance.sub(half);\n\n        // capture the contract's current ETH balance.\n        // this is so that we can capture exactly the amount of ETH that the\n        // swap creates, and not make the liquidity event include any ETH that\n        // has been manually sent to the contract\n        uint256 initialBalance = address(this).balance;\n\n        // swap tokens for BNB\n        swapTokensForBnb(half); // <- this breaks the BNB -> HATE swap when swap+liquify is triggered\n\n        // how much ETH did we just swap into?\n        uint256 newBalance = address(this).balance.sub(initialBalance);\n\n        // add liquidity to uniswap\n        addLiquidity(otherHalf, newBalance);\n\n        emit SwapAndLiquify(half, newBalance, otherHalf);\n    }\n\n    function swapTokensForBnb(uint256 tokenAmount) private {\n        // generate the uniswap pair path of token -> weth\n        address[] memory path = new address[](2);\n        path[0] = address(this);\n        path[1] = UniswapV2Router.WETH();\n\n        _approve(address(this), address(UniswapV2Router), tokenAmount);\n\n        // make the swap\n        UniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(\n            tokenAmount,\n            0, // accept any amount of ETH\n            path,\n            address(this),\n            block.timestamp\n        );\n    }\n\n    function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {\n        // approve token transfer to cover all possible scenarios\n        _approve(address(this), address(UniswapV2Router), tokenAmount);\n\n        // add the liquidity\n        UniswapV2Router.addLiquidityETH{value: ethAmount}(\n            address(this),\n            tokenAmount,\n            0, // slippage is unavoidable\n            0, // slippage is unavoidable\n            address(this),\n            block.timestamp\n        );\n    }\n\n    function setTaxless(address account, bool value)\n        external\n        onlyOwnerAndAdmin\n    {\n        isTaxless[account] = value;\n    }\n\n    function setBlacklist(address account, bool value)\n        external\n        onlyOwnerAndAdmin\n    {\n        blacklist[account] = value;\n    }\n\n    function setBlacklistAccounts(address[] memory accounts, bool value)\n        external\n        onlyOwnerAndAdmin\n    {\n        require(accounts.length < 10, \"accounts length must be less then 10\");\n        for (uint256 i = 0; i < accounts.length; i++) {\n            blacklist[accounts[i]] = value;\n        }\n    }\n\n    function setSwapAndLiquifyEnabled(bool enabled) external onlyOwnerAndAdmin {\n        swapAndLiquifyEnabled = enabled;\n        emit SwapAndLiquifyEnabledUpdated(enabled);\n    }\n\n    function setFeeActive(bool value) external onlyOwnerAndAdmin {\n        isFeeActive = value;\n    }\n\n    function setAllFee(\n        uint256 _buyFee,\n        uint256 _sellFee,\n        uint256 _liquidityFee,\n        uint256 _burnFee,\n        uint256 _redistributionFee\n    ) external onlyOwnerAndAdmin {\n        buyFee = _buyFee;\n        sellFee = _sellFee;\n        liquidityFee = _liquidityFee;\n        burnFee = _burnFee;\n        redistributionFee = _redistributionFee;\n        totalFeePercentage = buyFee+sellFee+liquidityFee+burnFee+redistributionFee;\n    }\n\n    function setFeeWallet(address wallet) external onlyOwnerAndAdmin {\n        require(\n            wallet != address(0),\n            \"Invalid Address, Address should not be zero\"\n        );\n        feeWallet = wallet;\n    }\n\n    function setTeamWallet(address wallet) external onlyOwnerAndAdmin {\n        require(\n            wallet != address(0),\n            \"Invalid Address, Address should not be zero\"\n        );\n        teamWallet = wallet;\n    }\n\n    function setDevelopmentTeamWallet(address wallet)\n        external\n        onlyOwnerAndAdmin\n    {\n        require(\n            wallet != address(0),\n            \"Invalid Address, Address should not be zero\"\n        );\n        developmentWallet = wallet;\n    }\n\n    function setMaxTxAmountPercentage(uint256 _maxAmountTxPercentage)\n        external\n        onlyOwner\n    {\n        maxTxAmountPercentage = _maxAmountTxPercentage;\n        emit txAmountPercentage(maxTxAmountPercentage);\n    }\n\n    function setAdmin(address account) external onlyOwnerAndAdmin {\n        require(\n            account != address(0),\n            \"Invalid Address, Address should not be zero\"\n        );\n        admin = account;\n    }\n\n    function setMinTokensBeforeSwap(uint256 amount) external onlyOwnerAndAdmin {\n        minTokensBeforeSwap = amount;\n    }\n\n    function setSellCooldownEnabled(bool value) external onlyOwnerAndAdmin {\n        sellCooldownEnabled = value;\n    }\n\n    function setSellCooldown(uint256 interval, uint256 amount)\n        external\n        onlyOwnerAndAdmin\n    {\n        sellCooldownTime = interval;\n        sellCooldownAmount = amount;\n    }\n\n    function launch() external onlyOwnerAndAdmin {\n        require(listedAt == 0, \"Already Listed!\");\n        listedAt = block.timestamp;\n    }\n\n    receive() external payable {}\n\n    /**\n     * @dev Remember that only owner can call so be careful when use on contracts generated from other contracts.\n     * @param tokenAddress The token contract address\n     * @param tokenAmount Number of tokens to be sent\n     */\n    function recoverERC20(address tokenAddress, uint256 tokenAmount)\n        public\n        onlyOwnerAndAdmin\n    {\n        IERC20Upgradeable(tokenAddress).transfer(owner(), tokenAmount);\n    }\n\n    //Recover eth accidentally sent to the contract\n    function claim(address payable destination) public onlyOwnerAndAdmin {\n        require(\n            destination != address(0),\n            \"Invalid Address, Address should not be zero\"\n        );\n        destination.transfer(address(this).balance);\n    }\n\n    function manualBurn(uint256 amount) public {\n        transfer(burnWallet, amount);\n    }\n\n    function removeERC20() public onlyOwnerAndAdmin {\n        IERC20Upgradeable(address(this)).transfer(\n            _msgSender(),\n            IERC20Upgradeable(address(this)).balanceOf(address(this))\n        );\n    }\n}"
    },
    "contracts/interfaces/IUniswapV2Factory.sol": {
      "content": "// SPDX-License-Identifier: MIT\npragma solidity >=0.5.0;\n\ninterface IUniswapV2Factory {\n    event PairCreated(address indexed token0, address indexed token1, address pair, uint);\n\n    function feeTo() external view returns (address);\n    function feeToSetter() external view returns (address);\n\n    function getPair(address tokenA, address tokenB) external view returns (address pair);\n    function allPairs(uint) external view returns (address pair);\n    function allPairsLength() external view returns (uint);\n\n    function createPair(address tokenA, address tokenB) external returns (address pair);\n\n    function setFeeTo(address) external;\n    function setFeeToSetter(address) external;\n}"
    },
    "contracts/interfaces/IUniswapV2Pair.sol": {
      "content": "// SPDX-License-Identifier: MIT\npragma solidity >=0.5.0;\n\ninterface IUniswapV2Pair {\n    event Approval(address indexed owner, address indexed spender, uint value);\n    event Transfer(address indexed from, address indexed to, uint value);\n\n    function name() external pure returns (string memory);\n    function symbol() external pure returns (string memory);\n    function decimals() external pure returns (uint8);\n    function totalSupply() external view returns (uint);\n    function balanceOf(address owner) external view returns (uint);\n    function allowance(address owner, address spender) external view returns (uint);\n\n    function approve(address spender, uint value) external returns (bool);\n    function transfer(address to, uint value) external returns (bool);\n    function transferFrom(address from, address to, uint value) external returns (bool);\n\n    function DOMAIN_SEPARATOR() external view returns (bytes32);\n    function PERMIT_TYPEHASH() external pure returns (bytes32);\n    function nonces(address owner) external view returns (uint);\n\n    function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;\n\n    event Mint(address indexed sender, uint amount0, uint amount1);\n    event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);\n    event Swap(\n        address indexed sender,\n        uint amount0In,\n        uint amount1In,\n        uint amount0Out,\n        uint amount1Out,\n        address indexed to\n    );\n    event Sync(uint112 reserve0, uint112 reserve1);\n\n    function MINIMUM_LIQUIDITY() external pure returns (uint);\n    function factory() external view returns (address);\n    function token0() external view returns (address);\n    function token1() external view returns (address);\n    function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);\n    function price0CumulativeLast() external view returns (uint);\n    function price1CumulativeLast() external view returns (uint);\n    function kLast() external view returns (uint);\n\n    function mint(address to) external returns (uint liquidity);\n    function burn(address to) external returns (uint amount0, uint amount1);\n    function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;\n    function skim(address to) external;\n    function sync() external;\n\n    function initialize(address, address) external;\n}"
    },
    "contracts/interfaces/IUniswapV2Router02.sol": {
      "content": "// SPDX-License-Identifier: MIT\npragma solidity >=0.6.2;\n\nimport './IUniswapV2Router01.sol';\n\ninterface IUniswapV2Router02 is IUniswapV2Router01 {\n    function removeLiquidityETHSupportingFeeOnTransferTokens(\n        address token,\n        uint liquidity,\n        uint amountTokenMin,\n        uint amountETHMin,\n        address to,\n        uint deadline\n    ) external returns (uint amountETH);\n    function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(\n        address token,\n        uint liquidity,\n        uint amountTokenMin,\n        uint amountETHMin,\n        address to,\n        uint deadline,\n        bool approveMax, uint8 v, bytes32 r, bytes32 s\n    ) external returns (uint amountETH);\n\n    function swapExactTokensForTokensSupportingFeeOnTransferTokens(\n        uint amountIn,\n        uint amountOutMin,\n        address[] calldata path,\n        address to,\n        uint deadline\n    ) external;\n    function swapExactETHForTokensSupportingFeeOnTransferTokens(\n        uint amountOutMin,\n        address[] calldata path,\n        address to,\n        uint deadline\n    ) external payable;\n    function swapExactTokensForETHSupportingFeeOnTransferTokens(\n        uint amountIn,\n        uint amountOutMin,\n        address[] calldata path,\n        address to,\n        uint deadline\n    ) external;\n}"
    },
    "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../utils/ContextUpgradeable.sol\";\nimport \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * By default, the owner account will be the one that deploys the contract. This\n * can later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {\n    address private _owner;\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the deployer as the initial owner.\n     */\n    function __Ownable_init() internal onlyInitializing {\n        __Ownable_init_unchained();\n    }\n\n    function __Ownable_init_unchained() internal onlyInitializing {\n        _transferOwnership(_msgSender());\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        require(owner() == _msgSender(), \"Ownable: caller is not the owner\");\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions anymore. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby removing any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        require(newOwner != address(0), \"Ownable: new owner is the zero address\");\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        address oldOwner = _owner;\n        _owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n\n    /**\n     * @dev This empty reserved space is put in place to allow future versions to add new\n     * variables without shifting down storage in the inheritance chain.\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n     */\n    uint256[49] private __gap;\n}\n"
    },
    "@openzeppelin/contracts-upgradeable/proxy/utils/UUPSUpgradeable.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.5.0) (proxy/utils/UUPSUpgradeable.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../../interfaces/draft-IERC1822Upgradeable.sol\";\nimport \"../ERC1967/ERC1967UpgradeUpgradeable.sol\";\nimport \"./Initializable.sol\";\n\n/**\n * @dev An upgradeability mechanism designed for UUPS proxies. The functions included here can perform an upgrade of an\n * {ERC1967Proxy}, when this contract is set as the implementation behind such a proxy.\n *\n * A security mechanism ensures that an upgrade does not turn off upgradeability accidentally, although this risk is\n * reinstated if the upgrade retains upgradeability but removes the security mechanism, e.g. by replacing\n * `UUPSUpgradeable` with a custom implementation of upgrades.\n *\n * The {_authorizeUpgrade} function must be overridden to include access restriction to the upgrade mechanism.\n *\n * _Available since v4.1._\n */\nabstract contract UUPSUpgradeable is Initializable, IERC1822ProxiableUpgradeable, ERC1967UpgradeUpgradeable {\n    function __UUPSUpgradeable_init() internal onlyInitializing {\n    }\n\n    function __UUPSUpgradeable_init_unchained() internal onlyInitializing {\n    }\n    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable state-variable-assignment\n    address private immutable __self = address(this);\n\n    /**\n     * @dev Check that the execution is being performed through a delegatecall call and that the execution context is\n     * a proxy contract with an implementation (as defined in ERC1967) pointing to self. This should only be the case\n     * for UUPS and transparent proxies that are using the current contract as their implementation. Execution of a\n     * function through ERC1167 minimal proxies (clones) would not normally pass this test, but is not guaranteed to\n     * fail.\n     */\n    modifier onlyProxy() {\n        require(address(this) != __self, \"Function must be called through delegatecall\");\n        require(_getImplementation() == __self, \"Function must be called through active proxy\");\n        _;\n    }\n\n    /**\n     * @dev Check that the execution is not being performed through a delegate call. This allows a function to be\n     * callable on the implementing contract but not through proxies.\n     */\n    modifier notDelegated() {\n        require(address(this) == __self, \"UUPSUpgradeable: must not be called through delegatecall\");\n        _;\n    }\n\n    /**\n     * @dev Implementation of the ERC1822 {proxiableUUID} function. This returns the storage slot used by the\n     * implementation. It is used to validate that the this implementation remains valid after an upgrade.\n     *\n     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks\n     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this\n     * function revert if invoked through a proxy. This is guaranteed by the `notDelegated` modifier.\n     */\n    function proxiableUUID() external view virtual override notDelegated returns (bytes32) {\n        return _IMPLEMENTATION_SLOT;\n    }\n\n    /**\n     * @dev Upgrade the implementation of the proxy to `newImplementation`.\n     *\n     * Calls {_authorizeUpgrade}.\n     *\n     * Emits an {Upgraded} event.\n     */\n    function upgradeTo(address newImplementation) external virtual onlyProxy {\n        _authorizeUpgrade(newImplementation);\n        _upgradeToAndCallUUPS(newImplementation, new bytes(0), false);\n    }\n\n    /**\n     * @dev Upgrade the implementation of the proxy to `newImplementation`, and subsequently execute the function call\n     * encoded in `data`.\n     *\n     * Calls {_authorizeUpgrade}.\n     *\n     * Emits an {Upgraded} event.\n     */\n    function upgradeToAndCall(address newImplementation, bytes memory data) external payable virtual onlyProxy {\n        _authorizeUpgrade(newImplementation);\n        _upgradeToAndCallUUPS(newImplementation, data, true);\n    }\n\n    /**\n     * @dev Function that should revert when `msg.sender` is not authorized to upgrade the contract. Called by\n     * {upgradeTo} and {upgradeToAndCall}.\n     *\n     * Normally, this function will use an xref:access.adoc[access control] modifier such as {Ownable-onlyOwner}.\n     *\n     * ```solidity\n     * function _authorizeUpgrade(address) internal override onlyOwner {}\n     * ```\n     */\n    function _authorizeUpgrade(address newImplementation) internal virtual;\n\n    /**\n     * @dev This empty reserved space is put in place to allow future versions to add new\n     * variables without shifting down storage in the inheritance chain.\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n     */\n    uint256[50] private __gap;\n}\n"
    },
    "@openzeppelin/contracts-upgradeable/token/ERC20/ERC20Upgradeable.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/ERC20.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./IERC20Upgradeable.sol\";\nimport \"./extensions/IERC20MetadataUpgradeable.sol\";\nimport \"../../utils/ContextUpgradeable.sol\";\nimport \"../../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Implementation of the {IERC20} interface.\n *\n * This implementation is agnostic to the way tokens are created. This means\n * that a supply mechanism has to be added in a derived contract using {_mint}.\n * For a generic mechanism see {ERC20PresetMinterPauser}.\n *\n * TIP: For a detailed writeup see our guide\n * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How\n * to implement supply mechanisms].\n *\n * We have followed general OpenZeppelin Contracts guidelines: functions revert\n * instead returning `false` on failure. This behavior is nonetheless\n * conventional and does not conflict with the expectations of ERC20\n * applications.\n *\n * Additionally, an {Approval} event is emitted on calls to {transferFrom}.\n * This allows applications to reconstruct the allowance for all accounts just\n * by listening to said events. Other implementations of the EIP may not emit\n * these events, as it isn't required by the specification.\n *\n * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}\n * functions have been added to mitigate the well-known issues around setting\n * allowances. See {IERC20-approve}.\n */\ncontract ERC20Upgradeable is Initializable, ContextUpgradeable, IERC20Upgradeable, IERC20MetadataUpgradeable {\n    mapping(address => uint256) private _balances;\n\n    mapping(address => mapping(address => uint256)) private _allowances;\n\n    uint256 private _totalSupply;\n\n    string private _name;\n    string private _symbol;\n\n    /**\n     * @dev Sets the values for {name} and {symbol}.\n     *\n     * The default value of {decimals} is 18. To select a different value for\n     * {decimals} you should overload it.\n     *\n     * All two of these values are immutable: they can only be set once during\n     * construction.\n     */\n    function __ERC20_init(string memory name_, string memory symbol_) internal onlyInitializing {\n        __ERC20_init_unchained(name_, symbol_);\n    }\n\n    function __ERC20_init_unchained(string memory name_, string memory symbol_) internal onlyInitializing {\n        _name = name_;\n        _symbol = symbol_;\n    }\n\n    /**\n     * @dev Returns the name of the token.\n     */\n    function name() public view virtual override returns (string memory) {\n        return _name;\n    }\n\n    /**\n     * @dev Returns the symbol of the token, usually a shorter version of the\n     * name.\n     */\n    function symbol() public view virtual override returns (string memory) {\n        return _symbol;\n    }\n\n    /**\n     * @dev Returns the number of decimals used to get its user representation.\n     * For example, if `decimals` equals `2`, a balance of `505` tokens should\n     * be displayed to a user as `5.05` (`505 / 10 ** 2`).\n     *\n     * Tokens usually opt for a value of 18, imitating the relationship between\n     * Ether and Wei. This is the value {ERC20} uses, unless this function is\n     * overridden;\n     *\n     * NOTE: This information is only used for _display_ purposes: it in\n     * no way affects any of the arithmetic of the contract, including\n     * {IERC20-balanceOf} and {IERC20-transfer}.\n     */\n    function decimals() public view virtual override returns (uint8) {\n        return 18;\n    }\n\n    /**\n     * @dev See {IERC20-totalSupply}.\n     */\n    function totalSupply() public view virtual override returns (uint256) {\n        return _totalSupply;\n    }\n\n    /**\n     * @dev See {IERC20-balanceOf}.\n     */\n    function balanceOf(address account) public view virtual override returns (uint256) {\n        return _balances[account];\n    }\n\n    /**\n     * @dev See {IERC20-transfer}.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - the caller must have a balance of at least `amount`.\n     */\n    function transfer(address to, uint256 amount) public virtual override returns (bool) {\n        address owner = _msgSender();\n        _transfer(owner, to, amount);\n        return true;\n    }\n\n    /**\n     * @dev See {IERC20-allowance}.\n     */\n    function allowance(address owner, address spender) public view virtual override returns (uint256) {\n        return _allowances[owner][spender];\n    }\n\n    /**\n     * @dev See {IERC20-approve}.\n     *\n     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on\n     * `transferFrom`. This is semantically equivalent to an infinite approval.\n     *\n     * Requirements:\n     *\n     * - `spender` cannot be the zero address.\n     */\n    function approve(address spender, uint256 amount) public virtual override returns (bool) {\n        address owner = _msgSender();\n        _approve(owner, spender, amount);\n        return true;\n    }\n\n    /**\n     * @dev See {IERC20-transferFrom}.\n     *\n     * Emits an {Approval} event indicating the updated allowance. This is not\n     * required by the EIP. See the note at the beginning of {ERC20}.\n     *\n     * NOTE: Does not update the allowance if the current allowance\n     * is the maximum `uint256`.\n     *\n     * Requirements:\n     *\n     * - `from` and `to` cannot be the zero address.\n     * - `from` must have a balance of at least `amount`.\n     * - the caller must have allowance for ``from``'s tokens of at least\n     * `amount`.\n     */\n    function transferFrom(\n        address from,\n        address to,\n        uint256 amount\n    ) public virtual override returns (bool) {\n        address spender = _msgSender();\n        _spendAllowance(from, spender, amount);\n        _transfer(from, to, amount);\n        return true;\n    }\n\n    /**\n     * @dev Atomically increases the allowance granted to `spender` by the caller.\n     *\n     * This is an alternative to {approve} that can be used as a mitigation for\n     * problems described in {IERC20-approve}.\n     *\n     * Emits an {Approval} event indicating the updated allowance.\n     *\n     * Requirements:\n     *\n     * - `spender` cannot be the zero address.\n     */\n    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {\n        address owner = _msgSender();\n        _approve(owner, spender, allowance(owner, spender) + addedValue);\n        return true;\n    }\n\n    /**\n     * @dev Atomically decreases the allowance granted to `spender` by the caller.\n     *\n     * This is an alternative to {approve} that can be used as a mitigation for\n     * problems described in {IERC20-approve}.\n     *\n     * Emits an {Approval} event indicating the updated allowance.\n     *\n     * Requirements:\n     *\n     * - `spender` cannot be the zero address.\n     * - `spender` must have allowance for the caller of at least\n     * `subtractedValue`.\n     */\n    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {\n        address owner = _msgSender();\n        uint256 currentAllowance = allowance(owner, spender);\n        require(currentAllowance >= subtractedValue, \"ERC20: decreased allowance below zero\");\n        unchecked {\n            _approve(owner, spender, currentAllowance - subtractedValue);\n        }\n\n        return true;\n    }\n\n    /**\n     * @dev Moves `amount` of tokens from `from` to `to`.\n     *\n     * This internal function is equivalent to {transfer}, and can be used to\n     * e.g. implement automatic token fees, slashing mechanisms, etc.\n     *\n     * Emits a {Transfer} event.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `from` must have a balance of at least `amount`.\n     */\n    function _transfer(\n        address from,\n        address to,\n        uint256 amount\n    ) internal virtual {\n        require(from != address(0), \"ERC20: transfer from the zero address\");\n        require(to != address(0), \"ERC20: transfer to the zero address\");\n\n        _beforeTokenTransfer(from, to, amount);\n\n        uint256 fromBalance = _balances[from];\n        require(fromBalance >= amount, \"ERC20: transfer amount exceeds balance\");\n        unchecked {\n            _balances[from] = fromBalance - amount;\n        }\n        _balances[to] += amount;\n\n        emit Transfer(from, to, amount);\n\n        _afterTokenTransfer(from, to, amount);\n    }\n\n    /** @dev Creates `amount` tokens and assigns them to `account`, increasing\n     * the total supply.\n     *\n     * Emits a {Transfer} event with `from` set to the zero address.\n     *\n     * Requirements:\n     *\n     * - `account` cannot be the zero address.\n     */\n    function _mint(address account, uint256 amount) internal virtual {\n        require(account != address(0), \"ERC20: mint to the zero address\");\n\n        _beforeTokenTransfer(address(0), account, amount);\n\n        _totalSupply += amount;\n        _balances[account] += amount;\n        emit Transfer(address(0), account, amount);\n\n        _afterTokenTransfer(address(0), account, amount);\n    }\n\n    /**\n     * @dev Destroys `amount` tokens from `account`, reducing the\n     * total supply.\n     *\n     * Emits a {Transfer} event with `to` set to the zero address.\n     *\n     * Requirements:\n     *\n     * - `account` cannot be the zero address.\n     * - `account` must have at least `amount` tokens.\n     */\n    function _burn(address account, uint256 amount) internal virtual {\n        require(account != address(0), \"ERC20: burn from the zero address\");\n\n        _beforeTokenTransfer(account, address(0), amount);\n\n        uint256 accountBalance = _balances[account];\n        require(accountBalance >= amount, \"ERC20: burn amount exceeds balance\");\n        unchecked {\n            _balances[account] = accountBalance - amount;\n        }\n        _totalSupply -= amount;\n\n        emit Transfer(account, address(0), amount);\n\n        _afterTokenTransfer(account, address(0), amount);\n    }\n\n    /**\n     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.\n     *\n     * This internal function is equivalent to `approve`, and can be used to\n     * e.g. set automatic allowances for certain subsystems, etc.\n     *\n     * Emits an {Approval} event.\n     *\n     * Requirements:\n     *\n     * - `owner` cannot be the zero address.\n     * - `spender` cannot be the zero address.\n     */\n    function _approve(\n        address owner,\n        address spender,\n        uint256 amount\n    ) internal virtual {\n        require(owner != address(0), \"ERC20: approve from the zero address\");\n        require(spender != address(0), \"ERC20: approve to the zero address\");\n\n        _allowances[owner][spender] = amount;\n        emit Approval(owner, spender, amount);\n    }\n\n    /**\n     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.\n     *\n     * Does not update the allowance amount in case of infinite allowance.\n     * Revert if not enough allowance is available.\n     *\n     * Might emit an {Approval} event.\n     */\n    function _spendAllowance(\n        address owner,\n        address spender,\n        uint256 amount\n    ) internal virtual {\n        uint256 currentAllowance = allowance(owner, spender);\n        if (currentAllowance != type(uint256).max) {\n            require(currentAllowance >= amount, \"ERC20: insufficient allowance\");\n            unchecked {\n                _approve(owner, spender, currentAllowance - amount);\n            }\n        }\n    }\n\n    /**\n     * @dev Hook that is called before any transfer of tokens. This includes\n     * minting and burning.\n     *\n     * Calling conditions:\n     *\n     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens\n     * will be transferred to `to`.\n     * - when `from` is zero, `amount` tokens will be minted for `to`.\n     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.\n     * - `from` and `to` are never both zero.\n     *\n     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].\n     */\n    function _beforeTokenTransfer(\n        address from,\n        address to,\n        uint256 amount\n    ) internal virtual {}\n\n    /**\n     * @dev Hook that is called after any transfer of tokens. This includes\n     * minting and burning.\n     *\n     * Calling conditions:\n     *\n     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens\n     * has been transferred to `to`.\n     * - when `from` is zero, `amount` tokens have been minted for `to`.\n     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.\n     * - `from` and `to` are never both zero.\n     *\n     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].\n     */\n    function _afterTokenTransfer(\n        address from,\n        address to,\n        uint256 amount\n    ) internal virtual {}\n\n    /**\n     * @dev This empty reserved space is put in place to allow future versions to add new\n     * variables without shifting down storage in the inheritance chain.\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n     */\n    uint256[45] private __gap;\n}\n"
    },
    "@openzeppelin/contracts/utils/Address.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)\n\npragma solidity ^0.8.1;\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary Address {\n    /**\n     * @dev Returns true if `account` is a contract.\n     *\n     * [IMPORTANT]\n     * ====\n     * It is unsafe to assume that an address for which this function returns\n     * false is an externally-owned account (EOA) and not a contract.\n     *\n     * Among others, `isContract` will return false for the following\n     * types of addresses:\n     *\n     *  - an externally-owned account\n     *  - a contract in construction\n     *  - an address where a contract will be created\n     *  - an address where a contract lived, but was destroyed\n     * ====\n     *\n     * [IMPORTANT]\n     * ====\n     * You shouldn't rely on `isContract` to protect against flash loan attacks!\n     *\n     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets\n     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract\n     * constructor.\n     * ====\n     */\n    function isContract(address account) internal view returns (bool) {\n        // This method relies on extcodesize/address.code.length, which returns 0\n        // for contracts in construction, since the code is only stored at the end\n        // of the constructor execution.\n\n        return account.code.length > 0;\n    }\n\n    /**\n     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n     * `recipient`, forwarding all available gas and reverting on errors.\n     *\n     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n     * of certain opcodes, possibly making contracts go over the 2300 gas limit\n     * imposed by `transfer`, making them unable to receive funds via\n     * `transfer`. {sendValue} removes this limitation.\n     *\n     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n     *\n     * IMPORTANT: because control is transferred to `recipient`, care must be\n     * taken to not create reentrancy vulnerabilities. Consider using\n     * {ReentrancyGuard} or the\n     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n     */\n    function sendValue(address payable recipient, uint256 amount) internal {\n        require(address(this).balance >= amount, \"Address: insufficient balance\");\n\n        (bool success, ) = recipient.call{value: amount}(\"\");\n        require(success, \"Address: unable to send value, recipient may have reverted\");\n    }\n\n    /**\n     * @dev Performs a Solidity function call using a low level `call`. A\n     * plain `call` is an unsafe replacement for a function call: use this\n     * function instead.\n     *\n     * If `target` reverts with a revert reason, it is bubbled up by this\n     * function (like regular Solidity function calls).\n     *\n     * Returns the raw returned data. To convert to the expected return value,\n     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n     *\n     * Requirements:\n     *\n     * - `target` must be a contract.\n     * - calling `target` with `data` must not revert.\n     *\n     * _Available since v3.1._\n     */\n    function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n        return functionCall(target, data, \"Address: low-level call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with\n     * `errorMessage` as a fallback revert reason when `target` reverts.\n     *\n     * _Available since v3.1._\n     */\n    function functionCall(\n        address target,\n        bytes memory data,\n        string memory errorMessage\n    ) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, 0, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but also transferring `value` wei to `target`.\n     *\n     * Requirements:\n     *\n     * - the calling contract must have an ETH balance of at least `value`.\n     * - the called Solidity function must be `payable`.\n     *\n     * _Available since v3.1._\n     */\n    function functionCallWithValue(\n        address target,\n        bytes memory data,\n        uint256 value\n    ) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, value, \"Address: low-level call with value failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but\n     * with `errorMessage` as a fallback revert reason when `target` reverts.\n     *\n     * _Available since v3.1._\n     */\n    function functionCallWithValue(\n        address target,\n        bytes memory data,\n        uint256 value,\n        string memory errorMessage\n    ) internal returns (bytes memory) {\n        require(address(this).balance >= value, \"Address: insufficient balance for call\");\n        require(isContract(target), \"Address: call to non-contract\");\n\n        (bool success, bytes memory returndata) = target.call{value: value}(data);\n        return verifyCallResult(success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a static call.\n     *\n     * _Available since v3.3._\n     */\n    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n        return functionStaticCall(target, data, \"Address: low-level static call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n     * but performing a static call.\n     *\n     * _Available since v3.3._\n     */\n    function functionStaticCall(\n        address target,\n        bytes memory data,\n        string memory errorMessage\n    ) internal view returns (bytes memory) {\n        require(isContract(target), \"Address: static call to non-contract\");\n\n        (bool success, bytes memory returndata) = target.staticcall(data);\n        return verifyCallResult(success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a delegate call.\n     *\n     * _Available since v3.4._\n     */\n    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {\n        return functionDelegateCall(target, data, \"Address: low-level delegate call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n     * but performing a delegate call.\n     *\n     * _Available since v3.4._\n     */\n    function functionDelegateCall(\n        address target,\n        bytes memory data,\n        string memory errorMessage\n    ) internal returns (bytes memory) {\n        require(isContract(target), \"Address: delegate call to non-contract\");\n\n        (bool success, bytes memory returndata) = target.delegatecall(data);\n        return verifyCallResult(success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the\n     * revert reason using the provided one.\n     *\n     * _Available since v4.3._\n     */\n    function verifyCallResult(\n        bool success,\n        bytes memory returndata,\n        string memory errorMessage\n    ) internal pure returns (bytes memory) {\n        if (success) {\n            return returndata;\n        } else {\n            // Look for revert reason and bubble it up if present\n            if (returndata.length > 0) {\n                // The easiest way to bubble the revert reason is using memory via assembly\n                /// @solidity memory-safe-assembly\n                assembly {\n                    let returndata_size := mload(returndata)\n                    revert(add(32, returndata), returndata_size)\n                }\n            } else {\n                revert(errorMessage);\n            }\n        }\n    }\n}\n"
    },
    "@openzeppelin/contracts/utils/math/SafeCast.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (utils/math/SafeCast.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow\n * checks.\n *\n * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can\n * easily result in undesired exploitation or bugs, since developers usually\n * assume that overflows raise errors. `SafeCast` restores this intuition by\n * reverting the transaction when such an operation overflows.\n *\n * Using this library instead of the unchecked operations eliminates an entire\n * class of bugs, so it's recommended to use it always.\n *\n * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing\n * all math on `uint256` and `int256` and then downcasting.\n */\nlibrary SafeCast {\n    /**\n     * @dev Returns the downcasted uint248 from uint256, reverting on\n     * overflow (when the input is greater than largest uint248).\n     *\n     * Counterpart to Solidity's `uint248` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 248 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint248(uint256 value) internal pure returns (uint248) {\n        require(value <= type(uint248).max, \"SafeCast: value doesn't fit in 248 bits\");\n        return uint248(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint240 from uint256, reverting on\n     * overflow (when the input is greater than largest uint240).\n     *\n     * Counterpart to Solidity's `uint240` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 240 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint240(uint256 value) internal pure returns (uint240) {\n        require(value <= type(uint240).max, \"SafeCast: value doesn't fit in 240 bits\");\n        return uint240(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint232 from uint256, reverting on\n     * overflow (when the input is greater than largest uint232).\n     *\n     * Counterpart to Solidity's `uint232` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 232 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint232(uint256 value) internal pure returns (uint232) {\n        require(value <= type(uint232).max, \"SafeCast: value doesn't fit in 232 bits\");\n        return uint232(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint224 from uint256, reverting on\n     * overflow (when the input is greater than largest uint224).\n     *\n     * Counterpart to Solidity's `uint224` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 224 bits\n     *\n     * _Available since v4.2._\n     */\n    function toUint224(uint256 value) internal pure returns (uint224) {\n        require(value <= type(uint224).max, \"SafeCast: value doesn't fit in 224 bits\");\n        return uint224(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint216 from uint256, reverting on\n     * overflow (when the input is greater than largest uint216).\n     *\n     * Counterpart to Solidity's `uint216` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 216 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint216(uint256 value) internal pure returns (uint216) {\n        require(value <= type(uint216).max, \"SafeCast: value doesn't fit in 216 bits\");\n        return uint216(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint208 from uint256, reverting on\n     * overflow (when the input is greater than largest uint208).\n     *\n     * Counterpart to Solidity's `uint208` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 208 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint208(uint256 value) internal pure returns (uint208) {\n        require(value <= type(uint208).max, \"SafeCast: value doesn't fit in 208 bits\");\n        return uint208(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint200 from uint256, reverting on\n     * overflow (when the input is greater than largest uint200).\n     *\n     * Counterpart to Solidity's `uint200` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 200 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint200(uint256 value) internal pure returns (uint200) {\n        require(value <= type(uint200).max, \"SafeCast: value doesn't fit in 200 bits\");\n        return uint200(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint192 from uint256, reverting on\n     * overflow (when the input is greater than largest uint192).\n     *\n     * Counterpart to Solidity's `uint192` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 192 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint192(uint256 value) internal pure returns (uint192) {\n        require(value <= type(uint192).max, \"SafeCast: value doesn't fit in 192 bits\");\n        return uint192(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint184 from uint256, reverting on\n     * overflow (when the input is greater than largest uint184).\n     *\n     * Counterpart to Solidity's `uint184` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 184 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint184(uint256 value) internal pure returns (uint184) {\n        require(value <= type(uint184).max, \"SafeCast: value doesn't fit in 184 bits\");\n        return uint184(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint176 from uint256, reverting on\n     * overflow (when the input is greater than largest uint176).\n     *\n     * Counterpart to Solidity's `uint176` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 176 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint176(uint256 value) internal pure returns (uint176) {\n        require(value <= type(uint176).max, \"SafeCast: value doesn't fit in 176 bits\");\n        return uint176(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint168 from uint256, reverting on\n     * overflow (when the input is greater than largest uint168).\n     *\n     * Counterpart to Solidity's `uint168` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 168 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint168(uint256 value) internal pure returns (uint168) {\n        require(value <= type(uint168).max, \"SafeCast: value doesn't fit in 168 bits\");\n        return uint168(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint160 from uint256, reverting on\n     * overflow (when the input is greater than largest uint160).\n     *\n     * Counterpart to Solidity's `uint160` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 160 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint160(uint256 value) internal pure returns (uint160) {\n        require(value <= type(uint160).max, \"SafeCast: value doesn't fit in 160 bits\");\n        return uint160(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint152 from uint256, reverting on\n     * overflow (when the input is greater than largest uint152).\n     *\n     * Counterpart to Solidity's `uint152` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 152 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint152(uint256 value) internal pure returns (uint152) {\n        require(value <= type(uint152).max, \"SafeCast: value doesn't fit in 152 bits\");\n        return uint152(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint144 from uint256, reverting on\n     * overflow (when the input is greater than largest uint144).\n     *\n     * Counterpart to Solidity's `uint144` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 144 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint144(uint256 value) internal pure returns (uint144) {\n        require(value <= type(uint144).max, \"SafeCast: value doesn't fit in 144 bits\");\n        return uint144(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint136 from uint256, reverting on\n     * overflow (when the input is greater than largest uint136).\n     *\n     * Counterpart to Solidity's `uint136` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 136 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint136(uint256 value) internal pure returns (uint136) {\n        require(value <= type(uint136).max, \"SafeCast: value doesn't fit in 136 bits\");\n        return uint136(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint128 from uint256, reverting on\n     * overflow (when the input is greater than largest uint128).\n     *\n     * Counterpart to Solidity's `uint128` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 128 bits\n     *\n     * _Available since v2.5._\n     */\n    function toUint128(uint256 value) internal pure returns (uint128) {\n        require(value <= type(uint128).max, \"SafeCast: value doesn't fit in 128 bits\");\n        return uint128(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint120 from uint256, reverting on\n     * overflow (when the input is greater than largest uint120).\n     *\n     * Counterpart to Solidity's `uint120` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 120 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint120(uint256 value) internal pure returns (uint120) {\n        require(value <= type(uint120).max, \"SafeCast: value doesn't fit in 120 bits\");\n        return uint120(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint112 from uint256, reverting on\n     * overflow (when the input is greater than largest uint112).\n     *\n     * Counterpart to Solidity's `uint112` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 112 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint112(uint256 value) internal pure returns (uint112) {\n        require(value <= type(uint112).max, \"SafeCast: value doesn't fit in 112 bits\");\n        return uint112(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint104 from uint256, reverting on\n     * overflow (when the input is greater than largest uint104).\n     *\n     * Counterpart to Solidity's `uint104` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 104 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint104(uint256 value) internal pure returns (uint104) {\n        require(value <= type(uint104).max, \"SafeCast: value doesn't fit in 104 bits\");\n        return uint104(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint96 from uint256, reverting on\n     * overflow (when the input is greater than largest uint96).\n     *\n     * Counterpart to Solidity's `uint96` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 96 bits\n     *\n     * _Available since v4.2._\n     */\n    function toUint96(uint256 value) internal pure returns (uint96) {\n        require(value <= type(uint96).max, \"SafeCast: value doesn't fit in 96 bits\");\n        return uint96(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint88 from uint256, reverting on\n     * overflow (when the input is greater than largest uint88).\n     *\n     * Counterpart to Solidity's `uint88` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 88 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint88(uint256 value) internal pure returns (uint88) {\n        require(value <= type(uint88).max, \"SafeCast: value doesn't fit in 88 bits\");\n        return uint88(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint80 from uint256, reverting on\n     * overflow (when the input is greater than largest uint80).\n     *\n     * Counterpart to Solidity's `uint80` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 80 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint80(uint256 value) internal pure returns (uint80) {\n        require(value <= type(uint80).max, \"SafeCast: value doesn't fit in 80 bits\");\n        return uint80(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint72 from uint256, reverting on\n     * overflow (when the input is greater than largest uint72).\n     *\n     * Counterpart to Solidity's `uint72` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 72 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint72(uint256 value) internal pure returns (uint72) {\n        require(value <= type(uint72).max, \"SafeCast: value doesn't fit in 72 bits\");\n        return uint72(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint64 from uint256, reverting on\n     * overflow (when the input is greater than largest uint64).\n     *\n     * Counterpart to Solidity's `uint64` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 64 bits\n     *\n     * _Available since v2.5._\n     */\n    function toUint64(uint256 value) internal pure returns (uint64) {\n        require(value <= type(uint64).max, \"SafeCast: value doesn't fit in 64 bits\");\n        return uint64(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint56 from uint256, reverting on\n     * overflow (when the input is greater than largest uint56).\n     *\n     * Counterpart to Solidity's `uint56` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 56 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint56(uint256 value) internal pure returns (uint56) {\n        require(value <= type(uint56).max, \"SafeCast: value doesn't fit in 56 bits\");\n        return uint56(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint48 from uint256, reverting on\n     * overflow (when the input is greater than largest uint48).\n     *\n     * Counterpart to Solidity's `uint48` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 48 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint48(uint256 value) internal pure returns (uint48) {\n        require(value <= type(uint48).max, \"SafeCast: value doesn't fit in 48 bits\");\n        return uint48(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint40 from uint256, reverting on\n     * overflow (when the input is greater than largest uint40).\n     *\n     * Counterpart to Solidity's `uint40` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 40 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint40(uint256 value) internal pure returns (uint40) {\n        require(value <= type(uint40).max, \"SafeCast: value doesn't fit in 40 bits\");\n        return uint40(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint32 from uint256, reverting on\n     * overflow (when the input is greater than largest uint32).\n     *\n     * Counterpart to Solidity's `uint32` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 32 bits\n     *\n     * _Available since v2.5._\n     */\n    function toUint32(uint256 value) internal pure returns (uint32) {\n        require(value <= type(uint32).max, \"SafeCast: value doesn't fit in 32 bits\");\n        return uint32(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint24 from uint256, reverting on\n     * overflow (when the input is greater than largest uint24).\n     *\n     * Counterpart to Solidity's `uint24` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 24 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint24(uint256 value) internal pure returns (uint24) {\n        require(value <= type(uint24).max, \"SafeCast: value doesn't fit in 24 bits\");\n        return uint24(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint16 from uint256, reverting on\n     * overflow (when the input is greater than largest uint16).\n     *\n     * Counterpart to Solidity's `uint16` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 16 bits\n     *\n     * _Available since v2.5._\n     */\n    function toUint16(uint256 value) internal pure returns (uint16) {\n        require(value <= type(uint16).max, \"SafeCast: value doesn't fit in 16 bits\");\n        return uint16(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint8 from uint256, reverting on\n     * overflow (when the input is greater than largest uint8).\n     *\n     * Counterpart to Solidity's `uint8` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 8 bits\n     *\n     * _Available since v2.5._\n     */\n    function toUint8(uint256 value) internal pure returns (uint8) {\n        require(value <= type(uint8).max, \"SafeCast: value doesn't fit in 8 bits\");\n        return uint8(value);\n    }\n\n    /**\n     * @dev Converts a signed int256 into an unsigned uint256.\n     *\n     * Requirements:\n     *\n     * - input must be greater than or equal to 0.\n     *\n     * _Available since v3.0._\n     */\n    function toUint256(int256 value) internal pure returns (uint256) {\n        require(value >= 0, \"SafeCast: value must be positive\");\n        return uint256(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int248 from int256, reverting on\n     * overflow (when the input is less than smallest int248 or\n     * greater than largest int248).\n     *\n     * Counterpart to Solidity's `int248` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 248 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt248(int256 value) internal pure returns (int248) {\n        require(value >= type(int248).min && value <= type(int248).max, \"SafeCast: value doesn't fit in 248 bits\");\n        return int248(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int240 from int256, reverting on\n     * overflow (when the input is less than smallest int240 or\n     * greater than largest int240).\n     *\n     * Counterpart to Solidity's `int240` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 240 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt240(int256 value) internal pure returns (int240) {\n        require(value >= type(int240).min && value <= type(int240).max, \"SafeCast: value doesn't fit in 240 bits\");\n        return int240(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int232 from int256, reverting on\n     * overflow (when the input is less than smallest int232 or\n     * greater than largest int232).\n     *\n     * Counterpart to Solidity's `int232` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 232 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt232(int256 value) internal pure returns (int232) {\n        require(value >= type(int232).min && value <= type(int232).max, \"SafeCast: value doesn't fit in 232 bits\");\n        return int232(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int224 from int256, reverting on\n     * overflow (when the input is less than smallest int224 or\n     * greater than largest int224).\n     *\n     * Counterpart to Solidity's `int224` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 224 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt224(int256 value) internal pure returns (int224) {\n        require(value >= type(int224).min && value <= type(int224).max, \"SafeCast: value doesn't fit in 224 bits\");\n        return int224(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int216 from int256, reverting on\n     * overflow (when the input is less than smallest int216 or\n     * greater than largest int216).\n     *\n     * Counterpart to Solidity's `int216` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 216 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt216(int256 value) internal pure returns (int216) {\n        require(value >= type(int216).min && value <= type(int216).max, \"SafeCast: value doesn't fit in 216 bits\");\n        return int216(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int208 from int256, reverting on\n     * overflow (when the input is less than smallest int208 or\n     * greater than largest int208).\n     *\n     * Counterpart to Solidity's `int208` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 208 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt208(int256 value) internal pure returns (int208) {\n        require(value >= type(int208).min && value <= type(int208).max, \"SafeCast: value doesn't fit in 208 bits\");\n        return int208(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int200 from int256, reverting on\n     * overflow (when the input is less than smallest int200 or\n     * greater than largest int200).\n     *\n     * Counterpart to Solidity's `int200` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 200 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt200(int256 value) internal pure returns (int200) {\n        require(value >= type(int200).min && value <= type(int200).max, \"SafeCast: value doesn't fit in 200 bits\");\n        return int200(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int192 from int256, reverting on\n     * overflow (when the input is less than smallest int192 or\n     * greater than largest int192).\n     *\n     * Counterpart to Solidity's `int192` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 192 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt192(int256 value) internal pure returns (int192) {\n        require(value >= type(int192).min && value <= type(int192).max, \"SafeCast: value doesn't fit in 192 bits\");\n        return int192(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int184 from int256, reverting on\n     * overflow (when the input is less than smallest int184 or\n     * greater than largest int184).\n     *\n     * Counterpart to Solidity's `int184` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 184 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt184(int256 value) internal pure returns (int184) {\n        require(value >= type(int184).min && value <= type(int184).max, \"SafeCast: value doesn't fit in 184 bits\");\n        return int184(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int176 from int256, reverting on\n     * overflow (when the input is less than smallest int176 or\n     * greater than largest int176).\n     *\n     * Counterpart to Solidity's `int176` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 176 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt176(int256 value) internal pure returns (int176) {\n        require(value >= type(int176).min && value <= type(int176).max, \"SafeCast: value doesn't fit in 176 bits\");\n        return int176(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int168 from int256, reverting on\n     * overflow (when the input is less than smallest int168 or\n     * greater than largest int168).\n     *\n     * Counterpart to Solidity's `int168` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 168 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt168(int256 value) internal pure returns (int168) {\n        require(value >= type(int168).min && value <= type(int168).max, \"SafeCast: value doesn't fit in 168 bits\");\n        return int168(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int160 from int256, reverting on\n     * overflow (when the input is less than smallest int160 or\n     * greater than largest int160).\n     *\n     * Counterpart to Solidity's `int160` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 160 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt160(int256 value) internal pure returns (int160) {\n        require(value >= type(int160).min && value <= type(int160).max, \"SafeCast: value doesn't fit in 160 bits\");\n        return int160(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int152 from int256, reverting on\n     * overflow (when the input is less than smallest int152 or\n     * greater than largest int152).\n     *\n     * Counterpart to Solidity's `int152` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 152 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt152(int256 value) internal pure returns (int152) {\n        require(value >= type(int152).min && value <= type(int152).max, \"SafeCast: value doesn't fit in 152 bits\");\n        return int152(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int144 from int256, reverting on\n     * overflow (when the input is less than smallest int144 or\n     * greater than largest int144).\n     *\n     * Counterpart to Solidity's `int144` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 144 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt144(int256 value) internal pure returns (int144) {\n        require(value >= type(int144).min && value <= type(int144).max, \"SafeCast: value doesn't fit in 144 bits\");\n        return int144(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int136 from int256, reverting on\n     * overflow (when the input is less than smallest int136 or\n     * greater than largest int136).\n     *\n     * Counterpart to Solidity's `int136` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 136 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt136(int256 value) internal pure returns (int136) {\n        require(value >= type(int136).min && value <= type(int136).max, \"SafeCast: value doesn't fit in 136 bits\");\n        return int136(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int128 from int256, reverting on\n     * overflow (when the input is less than smallest int128 or\n     * greater than largest int128).\n     *\n     * Counterpart to Solidity's `int128` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 128 bits\n     *\n     * _Available since v3.1._\n     */\n    function toInt128(int256 value) internal pure returns (int128) {\n        require(value >= type(int128).min && value <= type(int128).max, \"SafeCast: value doesn't fit in 128 bits\");\n        return int128(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int120 from int256, reverting on\n     * overflow (when the input is less than smallest int120 or\n     * greater than largest int120).\n     *\n     * Counterpart to Solidity's `int120` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 120 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt120(int256 value) internal pure returns (int120) {\n        require(value >= type(int120).min && value <= type(int120).max, \"SafeCast: value doesn't fit in 120 bits\");\n        return int120(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int112 from int256, reverting on\n     * overflow (when the input is less than smallest int112 or\n     * greater than largest int112).\n     *\n     * Counterpart to Solidity's `int112` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 112 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt112(int256 value) internal pure returns (int112) {\n        require(value >= type(int112).min && value <= type(int112).max, \"SafeCast: value doesn't fit in 112 bits\");\n        return int112(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int104 from int256, reverting on\n     * overflow (when the input is less than smallest int104 or\n     * greater than largest int104).\n     *\n     * Counterpart to Solidity's `int104` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 104 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt104(int256 value) internal pure returns (int104) {\n        require(value >= type(int104).min && value <= type(int104).max, \"SafeCast: value doesn't fit in 104 bits\");\n        return int104(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int96 from int256, reverting on\n     * overflow (when the input is less than smallest int96 or\n     * greater than largest int96).\n     *\n     * Counterpart to Solidity's `int96` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 96 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt96(int256 value) internal pure returns (int96) {\n        require(value >= type(int96).min && value <= type(int96).max, \"SafeCast: value doesn't fit in 96 bits\");\n        return int96(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int88 from int256, reverting on\n     * overflow (when the input is less than smallest int88 or\n     * greater than largest int88).\n     *\n     * Counterpart to Solidity's `int88` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 88 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt88(int256 value) internal pure returns (int88) {\n        require(value >= type(int88).min && value <= type(int88).max, \"SafeCast: value doesn't fit in 88 bits\");\n        return int88(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int80 from int256, reverting on\n     * overflow (when the input is less than smallest int80 or\n     * greater than largest int80).\n     *\n     * Counterpart to Solidity's `int80` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 80 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt80(int256 value) internal pure returns (int80) {\n        require(value >= type(int80).min && value <= type(int80).max, \"SafeCast: value doesn't fit in 80 bits\");\n        return int80(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int72 from int256, reverting on\n     * overflow (when the input is less than smallest int72 or\n     * greater than largest int72).\n     *\n     * Counterpart to Solidity's `int72` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 72 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt72(int256 value) internal pure returns (int72) {\n        require(value >= type(int72).min && value <= type(int72).max, \"SafeCast: value doesn't fit in 72 bits\");\n        return int72(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int64 from int256, reverting on\n     * overflow (when the input is less than smallest int64 or\n     * greater than largest int64).\n     *\n     * Counterpart to Solidity's `int64` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 64 bits\n     *\n     * _Available since v3.1._\n     */\n    function toInt64(int256 value) internal pure returns (int64) {\n        require(value >= type(int64).min && value <= type(int64).max, \"SafeCast: value doesn't fit in 64 bits\");\n        return int64(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int56 from int256, reverting on\n     * overflow (when the input is less than smallest int56 or\n     * greater than largest int56).\n     *\n     * Counterpart to Solidity's `int56` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 56 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt56(int256 value) internal pure returns (int56) {\n        require(value >= type(int56).min && value <= type(int56).max, \"SafeCast: value doesn't fit in 56 bits\");\n        return int56(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int48 from int256, reverting on\n     * overflow (when the input is less than smallest int48 or\n     * greater than largest int48).\n     *\n     * Counterpart to Solidity's `int48` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 48 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt48(int256 value) internal pure returns (int48) {\n        require(value >= type(int48).min && value <= type(int48).max, \"SafeCast: value doesn't fit in 48 bits\");\n        return int48(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int40 from int256, reverting on\n     * overflow (when the input is less than smallest int40 or\n     * greater than largest int40).\n     *\n     * Counterpart to Solidity's `int40` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 40 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt40(int256 value) internal pure returns (int40) {\n        require(value >= type(int40).min && value <= type(int40).max, \"SafeCast: value doesn't fit in 40 bits\");\n        return int40(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int32 from int256, reverting on\n     * overflow (when the input is less than smallest int32 or\n     * greater than largest int32).\n     *\n     * Counterpart to Solidity's `int32` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 32 bits\n     *\n     * _Available since v3.1._\n     */\n    function toInt32(int256 value) internal pure returns (int32) {\n        require(value >= type(int32).min && value <= type(int32).max, \"SafeCast: value doesn't fit in 32 bits\");\n        return int32(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int24 from int256, reverting on\n     * overflow (when the input is less than smallest int24 or\n     * greater than largest int24).\n     *\n     * Counterpart to Solidity's `int24` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 24 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt24(int256 value) internal pure returns (int24) {\n        require(value >= type(int24).min && value <= type(int24).max, \"SafeCast: value doesn't fit in 24 bits\");\n        return int24(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int16 from int256, reverting on\n     * overflow (when the input is less than smallest int16 or\n     * greater than largest int16).\n     *\n     * Counterpart to Solidity's `int16` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 16 bits\n     *\n     * _Available since v3.1._\n     */\n    function toInt16(int256 value) internal pure returns (int16) {\n        require(value >= type(int16).min && value <= type(int16).max, \"SafeCast: value doesn't fit in 16 bits\");\n        return int16(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int8 from int256, reverting on\n     * overflow (when the input is less than smallest int8 or\n     * greater than largest int8).\n     *\n     * Counterpart to Solidity's `int8` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 8 bits\n     *\n     * _Available since v3.1._\n     */\n    function toInt8(int256 value) internal pure returns (int8) {\n        require(value >= type(int8).min && value <= type(int8).max, \"SafeCast: value doesn't fit in 8 bits\");\n        return int8(value);\n    }\n\n    /**\n     * @dev Converts an unsigned uint256 into a signed int256.\n     *\n     * Requirements:\n     *\n     * - input must be less than or equal to maxInt256.\n     *\n     * _Available since v3.0._\n     */\n    function toInt256(uint256 value) internal pure returns (int256) {\n        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive\n        require(value <= uint256(type(int256).max), \"SafeCast: value doesn't fit in an int256\");\n        return int256(value);\n    }\n}\n"
    },
    "@openzeppelin/contracts-upgradeable/utils/math/SafeMathUpgradeable.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.6.0) (utils/math/SafeMath.sol)\n\npragma solidity ^0.8.0;\n\n// CAUTION\n// This version of SafeMath should only be used with Solidity 0.8 or later,\n// because it relies on the compiler's built in overflow checks.\n\n/**\n * @dev Wrappers over Solidity's arithmetic operations.\n *\n * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler\n * now has built in overflow checking.\n */\nlibrary SafeMathUpgradeable {\n    /**\n     * @dev Returns the addition of two unsigned integers, with an overflow flag.\n     *\n     * _Available since v3.4._\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            uint256 c = a + b;\n            if (c < a) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.\n     *\n     * _Available since v3.4._\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b > a) return (false, 0);\n            return (true, a - b);\n        }\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.\n     *\n     * _Available since v3.4._\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the\n            // benefit is lost if 'b' is also tested.\n            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522\n            if (a == 0) return (true, 0);\n            uint256 c = a * b;\n            if (c / a != b) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a division by zero flag.\n     *\n     * _Available since v3.4._\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a / b);\n        }\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.\n     *\n     * _Available since v3.4._\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a % b);\n        }\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, reverting on\n     * overflow.\n     *\n     * Counterpart to Solidity's `+` operator.\n     *\n     * Requirements:\n     *\n     * - Addition cannot overflow.\n     */\n    function add(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a + b;\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, reverting on\n     * overflow (when the result is negative).\n     *\n     * Counterpart to Solidity's `-` operator.\n     *\n     * Requirements:\n     *\n     * - Subtraction cannot overflow.\n     */\n    function sub(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a - b;\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, reverting on\n     * overflow.\n     *\n     * Counterpart to Solidity's `*` operator.\n     *\n     * Requirements:\n     *\n     * - Multiplication cannot overflow.\n     */\n    function mul(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a * b;\n    }\n\n    /**\n     * @dev Returns the integer division of two unsigned integers, reverting on\n     * division by zero. The result is rounded towards zero.\n     *\n     * Counterpart to Solidity's `/` operator.\n     *\n     * Requirements:\n     *\n     * - The divisor cannot be zero.\n     */\n    function div(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a / b;\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),\n     * reverting when dividing by zero.\n     *\n     * Counterpart to Solidity's `%` operator. This function uses a `revert`\n     * opcode (which leaves remaining gas untouched) while Solidity uses an\n     * invalid opcode to revert (consuming all remaining gas).\n     *\n     * Requirements:\n     *\n     * - The divisor cannot be zero.\n     */\n    function mod(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a % b;\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on\n     * overflow (when the result is negative).\n     *\n     * CAUTION: This function is deprecated because it requires allocating memory for the error\n     * message unnecessarily. For custom revert reasons use {trySub}.\n     *\n     * Counterpart to Solidity's `-` operator.\n     *\n     * Requirements:\n     *\n     * - Subtraction cannot overflow.\n     */\n    function sub(\n        uint256 a,\n        uint256 b,\n        string memory errorMessage\n    ) internal pure returns (uint256) {\n        unchecked {\n            require(b <= a, errorMessage);\n            return a - b;\n        }\n    }\n\n    /**\n     * @dev Returns the integer division of two unsigned integers, reverting with custom message on\n     * division by zero. The result is rounded towards zero.\n     *\n     * Counterpart to Solidity's `/` operator. Note: this function uses a\n     * `revert` opcode (which leaves remaining gas untouched) while Solidity\n     * uses an invalid opcode to revert (consuming all remaining gas).\n     *\n     * Requirements:\n     *\n     * - The divisor cannot be zero.\n     */\n    function div(\n        uint256 a,\n        uint256 b,\n        string memory errorMessage\n    ) internal pure returns (uint256) {\n        unchecked {\n            require(b > 0, errorMessage);\n            return a / b;\n        }\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),\n     * reverting with custom message when dividing by zero.\n     *\n     * CAUTION: This function is deprecated because it requires allocating memory for the error\n     * message unnecessarily. For custom revert reasons use {tryMod}.\n     *\n     * Counterpart to Solidity's `%` operator. This function uses a `revert`\n     * opcode (which leaves remaining gas untouched) while Solidity uses an\n     * invalid opcode to revert (consuming all remaining gas).\n     *\n     * Requirements:\n     *\n     * - The divisor cannot be zero.\n     */\n    function mod(\n        uint256 a,\n        uint256 b,\n        string memory errorMessage\n    ) internal pure returns (uint256) {\n        unchecked {\n            require(b > 0, errorMessage);\n            return a % b;\n        }\n    }\n}\n"
    },
    "contracts/interfaces/IUniswapV2Router01.sol": {
      "content": "// SPDX-License-Identifier: MIT\npragma solidity >=0.6.2;\n\ninterface IUniswapV2Router01 {\n    function factory() external pure returns (address);\n    function WETH() external pure returns (address);\n\n    function addLiquidity(\n        address tokenA,\n        address tokenB,\n        uint amountADesired,\n        uint amountBDesired,\n        uint amountAMin,\n        uint amountBMin,\n        address to,\n        uint deadline\n    ) external returns (uint amountA, uint amountB, uint liquidity);\n    function addLiquidityETH(\n        address token,\n        uint amountTokenDesired,\n        uint amountTokenMin,\n        uint amountETHMin,\n        address to,\n        uint deadline\n    ) external payable returns (uint amountToken, uint amountETH, uint liquidity);\n    function removeLiquidity(\n        address tokenA,\n        address tokenB,\n        uint liquidity,\n        uint amountAMin,\n        uint amountBMin,\n        address to,\n        uint deadline\n    ) external returns (uint amountA, uint amountB);\n    function removeLiquidityETH(\n        address token,\n        uint liquidity,\n        uint amountTokenMin,\n        uint amountETHMin,\n        address to,\n        uint deadline\n    ) external returns (uint amountToken, uint amountETH);\n    function removeLiquidityWithPermit(\n        address tokenA,\n        address tokenB,\n        uint liquidity,\n        uint amountAMin,\n        uint amountBMin,\n        address to,\n        uint deadline,\n        bool approveMax, uint8 v, bytes32 r, bytes32 s\n    ) external returns (uint amountA, uint amountB);\n    function removeLiquidityETHWithPermit(\n        address token,\n        uint liquidity,\n        uint amountTokenMin,\n        uint amountETHMin,\n        address to,\n        uint deadline,\n        bool approveMax, uint8 v, bytes32 r, bytes32 s\n    ) external returns (uint amountToken, uint amountETH);\n    function swapExactTokensForTokens(\n        uint amountIn,\n        uint amountOutMin,\n        address[] calldata path,\n        address to,\n        uint deadline\n    ) external returns (uint[] memory amounts);\n    function swapTokensForExactTokens(\n        uint amountOut,\n        uint amountInMax,\n        address[] calldata path,\n        address to,\n        uint deadline\n    ) external returns (uint[] memory amounts);\n    function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)\n        external\n        payable\n        returns (uint[] memory amounts);\n    function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)\n        external\n        returns (uint[] memory amounts);\n    function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)\n        external\n        returns (uint[] memory amounts);\n    function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)\n        external\n        payable\n        returns (uint[] memory amounts);\n\n    function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);\n    function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);\n    function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);\n    function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);\n    function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);\n}"
    },
    "@openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)\n\npragma solidity ^0.8.0;\nimport \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract ContextUpgradeable is Initializable {\n    function __Context_init() internal onlyInitializing {\n    }\n\n    function __Context_init_unchained() internal onlyInitializing {\n    }\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    /**\n     * @dev This empty reserved space is put in place to allow future versions to add new\n     * variables without shifting down storage in the inheritance chain.\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n     */\n    uint256[50] private __gap;\n}\n"
    },
    "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (proxy/utils/Initializable.sol)\n\npragma solidity ^0.8.2;\n\nimport \"../../utils/AddressUpgradeable.sol\";\n\n/**\n * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed\n * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an\n * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer\n * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.\n *\n * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be\n * reused. This mechanism prevents re-execution of each \"step\" but allows the creation of new initialization steps in\n * case an upgrade adds a module that needs to be initialized.\n *\n * For example:\n *\n * [.hljs-theme-light.nopadding]\n * ```\n * contract MyToken is ERC20Upgradeable {\n *     function initialize() initializer public {\n *         __ERC20_init(\"MyToken\", \"MTK\");\n *     }\n * }\n * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {\n *     function initializeV2() reinitializer(2) public {\n *         __ERC20Permit_init(\"MyToken\");\n *     }\n * }\n * ```\n *\n * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as\n * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.\n *\n * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure\n * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.\n *\n * [CAUTION]\n * ====\n * Avoid leaving a contract uninitialized.\n *\n * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation\n * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke\n * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:\n *\n * [.hljs-theme-light.nopadding]\n * ```\n * /// @custom:oz-upgrades-unsafe-allow constructor\n * constructor() {\n *     _disableInitializers();\n * }\n * ```\n * ====\n */\nabstract contract Initializable {\n    /**\n     * @dev Indicates that the contract has been initialized.\n     * @custom:oz-retyped-from bool\n     */\n    uint8 private _initialized;\n\n    /**\n     * @dev Indicates that the contract is in the process of being initialized.\n     */\n    bool private _initializing;\n\n    /**\n     * @dev Triggered when the contract has been initialized or reinitialized.\n     */\n    event Initialized(uint8 version);\n\n    /**\n     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,\n     * `onlyInitializing` functions can be used to initialize parent contracts. Equivalent to `reinitializer(1)`.\n     */\n    modifier initializer() {\n        bool isTopLevelCall = !_initializing;\n        require(\n            (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),\n            \"Initializable: contract is already initialized\"\n        );\n        _initialized = 1;\n        if (isTopLevelCall) {\n            _initializing = true;\n        }\n        _;\n        if (isTopLevelCall) {\n            _initializing = false;\n            emit Initialized(1);\n        }\n    }\n\n    /**\n     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the\n     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be\n     * used to initialize parent contracts.\n     *\n     * `initializer` is equivalent to `reinitializer(1)`, so a reinitializer may be used after the original\n     * initialization step. This is essential to configure modules that are added through upgrades and that require\n     * initialization.\n     *\n     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in\n     * a contract, executing them in the right order is up to the developer or operator.\n     */\n    modifier reinitializer(uint8 version) {\n        require(!_initializing && _initialized < version, \"Initializable: contract is already initialized\");\n        _initialized = version;\n        _initializing = true;\n        _;\n        _initializing = false;\n        emit Initialized(version);\n    }\n\n    /**\n     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the\n     * {initializer} and {reinitializer} modifiers, directly or indirectly.\n     */\n    modifier onlyInitializing() {\n        require(_initializing, \"Initializable: contract is not initializing\");\n        _;\n    }\n\n    /**\n     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.\n     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized\n     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called\n     * through proxies.\n     */\n    function _disableInitializers() internal virtual {\n        require(!_initializing, \"Initializable: contract is initializing\");\n        if (_initialized < type(uint8).max) {\n            _initialized = type(uint8).max;\n            emit Initialized(type(uint8).max);\n        }\n    }\n}\n"
    },
    "@openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)\n\npragma solidity ^0.8.1;\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary AddressUpgradeable {\n    /**\n     * @dev Returns true if `account` is a contract.\n     *\n     * [IMPORTANT]\n     * ====\n     * It is unsafe to assume that an address for which this function returns\n     * false is an externally-owned account (EOA) and not a contract.\n     *\n     * Among others, `isContract` will return false for the following\n     * types of addresses:\n     *\n     *  - an externally-owned account\n     *  - a contract in construction\n     *  - an address where a contract will be created\n     *  - an address where a contract lived, but was destroyed\n     * ====\n     *\n     * [IMPORTANT]\n     * ====\n     * You shouldn't rely on `isContract` to protect against flash loan attacks!\n     *\n     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets\n     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract\n     * constructor.\n     * ====\n     */\n    function isContract(address account) internal view returns (bool) {\n        // This method relies on extcodesize/address.code.length, which returns 0\n        // for contracts in construction, since the code is only stored at the end\n        // of the constructor execution.\n\n        return account.code.length > 0;\n    }\n\n    /**\n     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n     * `recipient`, forwarding all available gas and reverting on errors.\n     *\n     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n     * of certain opcodes, possibly making contracts go over the 2300 gas limit\n     * imposed by `transfer`, making them unable to receive funds via\n     * `transfer`. {sendValue} removes this limitation.\n     *\n     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n     *\n     * IMPORTANT: because control is transferred to `recipient`, care must be\n     * taken to not create reentrancy vulnerabilities. Consider using\n     * {ReentrancyGuard} or the\n     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n     */\n    function sendValue(address payable recipient, uint256 amount) internal {\n        require(address(this).balance >= amount, \"Address: insufficient balance\");\n\n        (bool success, ) = recipient.call{value: amount}(\"\");\n        require(success, \"Address: unable to send value, recipient may have reverted\");\n    }\n\n    /**\n     * @dev Performs a Solidity function call using a low level `call`. A\n     * plain `call` is an unsafe replacement for a function call: use this\n     * function instead.\n     *\n     * If `target` reverts with a revert reason, it is bubbled up by this\n     * function (like regular Solidity function calls).\n     *\n     * Returns the raw returned data. To convert to the expected return value,\n     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n     *\n     * Requirements:\n     *\n     * - `target` must be a contract.\n     * - calling `target` with `data` must not revert.\n     *\n     * _Available since v3.1._\n     */\n    function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n        return functionCall(target, data, \"Address: low-level call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with\n     * `errorMessage` as a fallback revert reason when `target` reverts.\n     *\n     * _Available since v3.1._\n     */\n    function functionCall(\n        address target,\n        bytes memory data,\n        string memory errorMessage\n    ) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, 0, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but also transferring `value` wei to `target`.\n     *\n     * Requirements:\n     *\n     * - the calling contract must have an ETH balance of at least `value`.\n     * - the called Solidity function must be `payable`.\n     *\n     * _Available since v3.1._\n     */\n    function functionCallWithValue(\n        address target,\n        bytes memory data,\n        uint256 value\n    ) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, value, \"Address: low-level call with value failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but\n     * with `errorMessage` as a fallback revert reason when `target` reverts.\n     *\n     * _Available since v3.1._\n     */\n    function functionCallWithValue(\n        address target,\n        bytes memory data,\n        uint256 value,\n        string memory errorMessage\n    ) internal returns (bytes memory) {\n        require(address(this).balance >= value, \"Address: insufficient balance for call\");\n        require(isContract(target), \"Address: call to non-contract\");\n\n        (bool success, bytes memory returndata) = target.call{value: value}(data);\n        return verifyCallResult(success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a static call.\n     *\n     * _Available since v3.3._\n     */\n    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n        return functionStaticCall(target, data, \"Address: low-level static call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n     * but performing a static call.\n     *\n     * _Available since v3.3._\n     */\n    function functionStaticCall(\n        address target,\n        bytes memory data,\n        string memory errorMessage\n    ) internal view returns (bytes memory) {\n        require(isContract(target), \"Address: static call to non-contract\");\n\n        (bool success, bytes memory returndata) = target.staticcall(data);\n        return verifyCallResult(success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the\n     * revert reason using the provided one.\n     *\n     * _Available since v4.3._\n     */\n    function verifyCallResult(\n        bool success,\n        bytes memory returndata,\n        string memory errorMessage\n    ) internal pure returns (bytes memory) {\n        if (success) {\n            return returndata;\n        } else {\n            // Look for revert reason and bubble it up if present\n            if (returndata.length > 0) {\n                // The easiest way to bubble the revert reason is using memory via assembly\n                /// @solidity memory-safe-assembly\n                assembly {\n                    let returndata_size := mload(returndata)\n                    revert(add(32, returndata), returndata_size)\n                }\n            } else {\n                revert(errorMessage);\n            }\n        }\n    }\n}\n"
    },
    "@openzeppelin/contracts-upgradeable/interfaces/draft-IERC1822Upgradeable.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.5.0) (interfaces/draft-IERC1822.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev ERC1822: Universal Upgradeable Proxy Standard (UUPS) documents a method for upgradeability through a simplified\n * proxy whose upgrades are fully controlled by the current implementation.\n */\ninterface IERC1822ProxiableUpgradeable {\n    /**\n     * @dev Returns the storage slot that the proxiable contract assumes is being used to store the implementation\n     * address.\n     *\n     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks\n     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this\n     * function revert if invoked through a proxy.\n     */\n    function proxiableUUID() external view returns (bytes32);\n}\n"
    },
    "@openzeppelin/contracts-upgradeable/proxy/ERC1967/ERC1967UpgradeUpgradeable.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.5.0) (proxy/ERC1967/ERC1967Upgrade.sol)\n\npragma solidity ^0.8.2;\n\nimport \"../beacon/IBeaconUpgradeable.sol\";\nimport \"../../interfaces/draft-IERC1822Upgradeable.sol\";\nimport \"../../utils/AddressUpgradeable.sol\";\nimport \"../../utils/StorageSlotUpgradeable.sol\";\nimport \"../utils/Initializable.sol\";\n\n/**\n * @dev This abstract contract provides getters and event emitting update functions for\n * https://eips.ethereum.org/EIPS/eip-1967[EIP1967] slots.\n *\n * _Available since v4.1._\n *\n * @custom:oz-upgrades-unsafe-allow delegatecall\n */\nabstract contract ERC1967UpgradeUpgradeable is Initializable {\n    function __ERC1967Upgrade_init() internal onlyInitializing {\n    }\n\n    function __ERC1967Upgrade_init_unchained() internal onlyInitializing {\n    }\n    // This is the keccak-256 hash of \"eip1967.proxy.rollback\" subtracted by 1\n    bytes32 private constant _ROLLBACK_SLOT = 0x4910fdfa16fed3260ed0e7147f7cc6da11a60208b5b9406d12a635614ffd9143;\n\n    /**\n     * @dev Storage slot with the address of the current implementation.\n     * This is the keccak-256 hash of \"eip1967.proxy.implementation\" subtracted by 1, and is\n     * validated in the constructor.\n     */\n    bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;\n\n    /**\n     * @dev Emitted when the implementation is upgraded.\n     */\n    event Upgraded(address indexed implementation);\n\n    /**\n     * @dev Returns the current implementation address.\n     */\n    function _getImplementation() internal view returns (address) {\n        return StorageSlotUpgradeable.getAddressSlot(_IMPLEMENTATION_SLOT).value;\n    }\n\n    /**\n     * @dev Stores a new address in the EIP1967 implementation slot.\n     */\n    function _setImplementation(address newImplementation) private {\n        require(AddressUpgradeable.isContract(newImplementation), \"ERC1967: new implementation is not a contract\");\n        StorageSlotUpgradeable.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;\n    }\n\n    /**\n     * @dev Perform implementation upgrade\n     *\n     * Emits an {Upgraded} event.\n     */\n    function _upgradeTo(address newImplementation) internal {\n        _setImplementation(newImplementation);\n        emit Upgraded(newImplementation);\n    }\n\n    /**\n     * @dev Perform implementation upgrade with additional setup call.\n     *\n     * Emits an {Upgraded} event.\n     */\n    function _upgradeToAndCall(\n        address newImplementation,\n        bytes memory data,\n        bool forceCall\n    ) internal {\n        _upgradeTo(newImplementation);\n        if (data.length > 0 || forceCall) {\n            _functionDelegateCall(newImplementation, data);\n        }\n    }\n\n    /**\n     * @dev Perform implementation upgrade with security checks for UUPS proxies, and additional setup call.\n     *\n     * Emits an {Upgraded} event.\n     */\n    function _upgradeToAndCallUUPS(\n        address newImplementation,\n        bytes memory data,\n        bool forceCall\n    ) internal {\n        // Upgrades from old implementations will perform a rollback test. This test requires the new\n        // implementation to upgrade back to the old, non-ERC1822 compliant, implementation. Removing\n        // this special case will break upgrade paths from old UUPS implementation to new ones.\n        if (StorageSlotUpgradeable.getBooleanSlot(_ROLLBACK_SLOT).value) {\n            _setImplementation(newImplementation);\n        } else {\n            try IERC1822ProxiableUpgradeable(newImplementation).proxiableUUID() returns (bytes32 slot) {\n                require(slot == _IMPLEMENTATION_SLOT, \"ERC1967Upgrade: unsupported proxiableUUID\");\n            } catch {\n                revert(\"ERC1967Upgrade: new implementation is not UUPS\");\n            }\n            _upgradeToAndCall(newImplementation, data, forceCall);\n        }\n    }\n\n    /**\n     * @dev Storage slot with the admin of the contract.\n     * This is the keccak-256 hash of \"eip1967.proxy.admin\" subtracted by 1, and is\n     * validated in the constructor.\n     */\n    bytes32 internal constant _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;\n\n    /**\n     * @dev Emitted when the admin account has changed.\n     */\n    event AdminChanged(address previousAdmin, address newAdmin);\n\n    /**\n     * @dev Returns the current admin.\n     */\n    function _getAdmin() internal view returns (address) {\n        return StorageSlotUpgradeable.getAddressSlot(_ADMIN_SLOT).value;\n    }\n\n    /**\n     * @dev Stores a new address in the EIP1967 admin slot.\n     */\n    function _setAdmin(address newAdmin) private {\n        require(newAdmin != address(0), \"ERC1967: new admin is the zero address\");\n        StorageSlotUpgradeable.getAddressSlot(_ADMIN_SLOT).value = newAdmin;\n    }\n\n    /**\n     * @dev Changes the admin of the proxy.\n     *\n     * Emits an {AdminChanged} event.\n     */\n    function _changeAdmin(address newAdmin) internal {\n        emit AdminChanged(_getAdmin(), newAdmin);\n        _setAdmin(newAdmin);\n    }\n\n    /**\n     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.\n     * This is bytes32(uint256(keccak256('eip1967.proxy.beacon')) - 1)) and is validated in the constructor.\n     */\n    bytes32 internal constant _BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;\n\n    /**\n     * @dev Emitted when the beacon is upgraded.\n     */\n    event BeaconUpgraded(address indexed beacon);\n\n    /**\n     * @dev Returns the current beacon.\n     */\n    function _getBeacon() internal view returns (address) {\n        return StorageSlotUpgradeable.getAddressSlot(_BEACON_SLOT).value;\n    }\n\n    /**\n     * @dev Stores a new beacon in the EIP1967 beacon slot.\n     */\n    function _setBeacon(address newBeacon) private {\n        require(AddressUpgradeable.isContract(newBeacon), \"ERC1967: new beacon is not a contract\");\n        require(\n            AddressUpgradeable.isContract(IBeaconUpgradeable(newBeacon).implementation()),\n            \"ERC1967: beacon implementation is not a contract\"\n        );\n        StorageSlotUpgradeable.getAddressSlot(_BEACON_SLOT).value = newBeacon;\n    }\n\n    /**\n     * @dev Perform beacon upgrade with additional setup call. Note: This upgrades the address of the beacon, it does\n     * not upgrade the implementation contained in the beacon (see {UpgradeableBeacon-_setImplementation} for that).\n     *\n     * Emits a {BeaconUpgraded} event.\n     */\n    function _upgradeBeaconToAndCall(\n        address newBeacon,\n        bytes memory data,\n        bool forceCall\n    ) internal {\n        _setBeacon(newBeacon);\n        emit BeaconUpgraded(newBeacon);\n        if (data.length > 0 || forceCall) {\n            _functionDelegateCall(IBeaconUpgradeable(newBeacon).implementation(), data);\n        }\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n     * but performing a delegate call.\n     *\n     * _Available since v3.4._\n     */\n    function _functionDelegateCall(address target, bytes memory data) private returns (bytes memory) {\n        require(AddressUpgradeable.isContract(target), \"Address: delegate call to non-contract\");\n\n        // solhint-disable-next-line avoid-low-level-calls\n        (bool success, bytes memory returndata) = target.delegatecall(data);\n        return AddressUpgradeable.verifyCallResult(success, returndata, \"Address: low-level delegate call failed\");\n    }\n\n    /**\n     * @dev This empty reserved space is put in place to allow future versions to add new\n     * variables without shifting down storage in the inheritance chain.\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n     */\n    uint256[50] private __gap;\n}\n"
    },
    "@openzeppelin/contracts-upgradeable/proxy/beacon/IBeaconUpgradeable.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (proxy/beacon/IBeacon.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev This is the interface that {BeaconProxy} expects of its beacon.\n */\ninterface IBeaconUpgradeable {\n    /**\n     * @dev Must return an address that can be used as a delegate call target.\n     *\n     * {BeaconProxy} will check that this address is a contract.\n     */\n    function implementation() external view returns (address);\n}\n"
    },
    "@openzeppelin/contracts-upgradeable/utils/StorageSlotUpgradeable.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (utils/StorageSlot.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Library for reading and writing primitive types to specific storage slots.\n *\n * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.\n * This library helps with reading and writing to such slots without the need for inline assembly.\n *\n * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.\n *\n * Example usage to set ERC1967 implementation slot:\n * ```\n * contract ERC1967 {\n *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;\n *\n *     function _getImplementation() internal view returns (address) {\n *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;\n *     }\n *\n *     function _setImplementation(address newImplementation) internal {\n *         require(Address.isContract(newImplementation), \"ERC1967: new implementation is not a contract\");\n *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;\n *     }\n * }\n * ```\n *\n * _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._\n */\nlibrary StorageSlotUpgradeable {\n    struct AddressSlot {\n        address value;\n    }\n\n    struct BooleanSlot {\n        bool value;\n    }\n\n    struct Bytes32Slot {\n        bytes32 value;\n    }\n\n    struct Uint256Slot {\n        uint256 value;\n    }\n\n    /**\n     * @dev Returns an `AddressSlot` with member `value` located at `slot`.\n     */\n    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {\n        /// @solidity memory-safe-assembly\n        assembly {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.\n     */\n    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {\n        /// @solidity memory-safe-assembly\n        assembly {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.\n     */\n    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {\n        /// @solidity memory-safe-assembly\n        assembly {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.\n     */\n    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {\n        /// @solidity memory-safe-assembly\n        assembly {\n            r.slot := slot\n        }\n    }\n}\n"
    },
    "@openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC20 standard as defined in the EIP.\n */\ninterface IERC20Upgradeable {\n    /**\n     * @dev Emitted when `value` tokens are moved from one account (`from`) to\n     * another (`to`).\n     *\n     * Note that `value` may be zero.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 value);\n\n    /**\n     * @dev Emitted when the allowance of a `spender` for an `owner` is set by\n     * a call to {approve}. `value` is the new allowance.\n     */\n    event Approval(address indexed owner, address indexed spender, uint256 value);\n\n    /**\n     * @dev Returns the amount of tokens in existence.\n     */\n    function totalSupply() external view returns (uint256);\n\n    /**\n     * @dev Returns the amount of tokens owned by `account`.\n     */\n    function balanceOf(address account) external view returns (uint256);\n\n    /**\n     * @dev Moves `amount` tokens from the caller's account to `to`.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transfer(address to, uint256 amount) external returns (bool);\n\n    /**\n     * @dev Returns the remaining number of tokens that `spender` will be\n     * allowed to spend on behalf of `owner` through {transferFrom}. This is\n     * zero by default.\n     *\n     * This value changes when {approve} or {transferFrom} are called.\n     */\n    function allowance(address owner, address spender) external view returns (uint256);\n\n    /**\n     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * IMPORTANT: Beware that changing an allowance with this method brings the risk\n     * that someone may use both the old and the new allowance by unfortunate\n     * transaction ordering. One possible solution to mitigate this race\n     * condition is to first reduce the spender's allowance to 0 and set the\n     * desired value afterwards:\n     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address spender, uint256 amount) external returns (bool);\n\n    /**\n     * @dev Moves `amount` tokens from `from` to `to` using the\n     * allowance mechanism. `amount` is then deducted from the caller's\n     * allowance.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(\n        address from,\n        address to,\n        uint256 amount\n    ) external returns (bool);\n}\n"
    },
    "@openzeppelin/contracts-upgradeable/token/ERC20/extensions/IERC20MetadataUpgradeable.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../IERC20Upgradeable.sol\";\n\n/**\n * @dev Interface for the optional metadata functions from the ERC20 standard.\n *\n * _Available since v4.1._\n */\ninterface IERC20MetadataUpgradeable is IERC20Upgradeable {\n    /**\n     * @dev Returns the name of the token.\n     */\n    function name() external view returns (string memory);\n\n    /**\n     * @dev Returns the symbol of the token.\n     */\n    function symbol() external view returns (string memory);\n\n    /**\n     * @dev Returns the decimals places of the token.\n     */\n    function decimals() external view returns (uint8);\n}\n"
    }
  },
  "settings": {
    "optimizer": {
      "enabled": true,
      "runs": 200
    },
    "outputSelection": {
      "*": {
        "*": [
          "evm.bytecode",
          "evm.deployedBytecode",
          "devdoc",
          "userdoc",
          "metadata",
          "abi"
        ]
      }
    },
    "libraries": {}
  }
}