{
  "language": "Solidity",
  "sources": {
    "/contracts/MarketplaceSecondary.sol": {
      "content": "// SPDX-License-Identifier: ISC\npragma solidity ^0.8.10;\n\nimport \"@openzeppelin/contracts/token/ERC721/IERC721.sol\";\nimport \"@openzeppelin/contracts/token/ERC1155/IERC1155.sol\";\nimport \"@openzeppelin/contracts/token/ERC1155/IERC1155Receiver.sol\";\nimport \"@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol\";\nimport \"@openzeppelin/contracts/access/Ownable.sol\";\nimport \"@openzeppelin/contracts/token/common/ERC2981.sol\";\nimport \"./interface/IMarketplaceSecondaryWhitelist.sol\";\n\ncontract MarketplaceSecondary is Ownable, IERC1155Receiver {\n    using SafeERC20 for IERC20;\n\n    // Structures\n    struct Sell {\n        address paymentToken; // token is address(0), it means native BNB\n        uint price; // price of the sell. For ERC1155 it's the price of the bundle\n        uint amount; // 1 for ERC721, 1 or more for ERC1155\n        uint tokenId;\n        address owner; // address that creates the listing\n        address collection;\n        bool active;\n        uint id;\n    }\n\n    // Marketplace variables\n    address public treasury;\n    uint public marketplaceFee; // marketplace fee over 1000 - ex: 50 -> 5%\n    uint public maxFee; // max marketplace fee over 1000 - ex: 100 -> 10%\n    uint public nextSellId;\n    uint public minimumBidPriceIncrease;\n    IMarketplaceSecondaryWhitelist public whitelist;\n\n    mapping (uint => Sell) public sellOrdersById;\n    mapping (address => uint[]) public sellOrdersByCollection;\n    mapping (address => uint[]) public sellOrdersByAccount;\n\n    // ERC-2981 interface\n    bytes4 private constant _INTERFACE_ID_ERC2981 = 0x2a55205a;\n\n    // royalty percentage with a denominator of 100000. Cannot be more than 5% (500000)\n    mapping (address => uint) public royalties;\n\n    // fees denominator\n    uint public feePrecision = 10000;\n\n    event SellOrderCreated(address indexed seller, address indexed collection, uint tokenId, uint price, address paymentToken, bool isERC721);\n    event SellOrderRemoved(address indexed seller, address indexed collection, uint tokenId, uint price, address paymentToken, bool isERC721);\n    event BuyOrder(address indexed buyer, address indexed collection, uint tokenId, uint price, address paymentToken, bool isERC721);\n    event ChangePriceOrder(address indexed seller, address indexed collection, uint tokenId, uint price);\n\n    /**\n     * @notice Constructor\n     * @param _treasury Address that collects fees\n     * @param _marketplaceFee Address that collects fees\n     * @param _maxFee Address that collects fees\n     * @dev set marketplaceFee and maxFee\n     */\n    constructor (address _treasury, uint _marketplaceFee, uint _maxFee){\n        marketplaceFee = _marketplaceFee;\n        maxFee = _maxFee;\n        treasury = _treasury;\n    }\n\n    /**\n     * @notice sell a NFT (ERC721)\n     * @param _collection Address of the collection\n     * @param _tokenId Token ID of the NFT\n     * @param _price Price of the bundle (not of the single item)\n     * @param _paymentToken Payment Token used (if 0x000... BNB will be used)\n     */\n    function sell721(address _collection, uint _tokenId, uint _price,\n         address _paymentToken) external {\n\n        require (whitelist.is721Whitelisted(_collection), \"SecondaryMarketplace: Collection not whitelisted\");\n        require (IERC721(_collection).ownerOf(_tokenId) == msg.sender, \"SecondaryMarketplace: Not owner\");\n        require (whitelist.isPaymentTokenWhitelisted(_paymentToken), \"SecondaryMarketplace: Invalid payment token\");\n        \n\n        // Transfer the token\n        IERC721(_collection).transferFrom(msg.sender, address(this), _tokenId);\n\n        Sell memory sell = Sell({\n            paymentToken: _paymentToken,\n            price: _price,\n            amount: 1,\n            tokenId: _tokenId,\n            owner: msg.sender,\n            collection: _collection,\n            active: true,\n            id: nextSellId\n        });\n\n        sellOrdersByCollection[_collection].push(nextSellId);\n        sellOrdersByAccount[msg.sender].push(nextSellId);\n        sellOrdersById[nextSellId] = sell;\n\n        nextSellId += 1;\n\n        emit SellOrderCreated(msg.sender, _collection, _tokenId, _price, _paymentToken, true);\n    }\n\n    /**\n     * @notice Remove NFT from listing\n     * @param _index Index of the order\n     */\n    function cancelSell721(uint _index) external {\n        require (_index < nextSellId, \"SecondaryMarketplace: Invalid index\");\n\n        Sell storage sell = sellOrdersById[_index];\n        require (sell.owner == msg.sender, \"SecondaryMarketplace: Not owner\");\n        require (whitelist.is721Whitelisted(sell.collection), \"SecondaryMarketplace: Collection not whitelisted\");\n\n        // Transfer the token\n        IERC721(sell.collection).transferFrom(address(this), msg.sender, sell.tokenId);\n\n        // Cancel the order\n        sell.active = false;\n\n        emit SellOrderRemoved(msg.sender, sell.collection, sell.tokenId, sell.price, sell.paymentToken, true);\n\n    }\n    function changeSellPrice(uint _index, uint _basePrice) external {\n        Sell storage sell = sellOrdersById[_index];\n        require (_index < nextSellId, \"SecondaryMarketplace: Invalid index\");\n        require (sell.owner == msg.sender, \"SecondaryMarketplace: Not owner\");\n        sell.price = _basePrice;\n        emit ChangePriceOrder(msg.sender,sell.collection,sell.tokenId,_basePrice);\n    }\n\n    /**\n     * @notice buy a NFT (ERC721)\n     * @param _index Index of the order\n     */\n    function buy721(uint _index) external payable {\n        require (_index < nextSellId, \"SecondaryMarketplace: Invalid index\");\n\n        Sell storage sell = sellOrdersById[_index];\n        require (sell.active, \"SecondaryMarketplace: Already claimed or sold\");\n\n        // Check payment\n        processPaymentFrom(sell.paymentToken, msg.sender, sell.price);\n\n        uint sellerAmount = sell.price;\n\n        // Check royalties with ERC2981\n        if (checkRoyaltiesWithERC2981(sell.collection)) {\n            (address receiver, uint royaltyAmount) = ERC2981(sell.collection).royaltyInfo(sell.tokenId, sell.price);\n\n            processPaymentTo(sell.paymentToken, receiver, royaltyAmount);\n            sellerAmount -= royaltyAmount;\n        }\n\n        // Check marketplace royalties\n        else if (royalties[sell.collection] > 0) {\n            address receiver = Ownable(sell.collection).owner();\n            uint royaltyAmount = sell.price * royalties[sell.collection] / feePrecision;\n\n            processPaymentTo(sell.paymentToken, receiver, royaltyAmount);\n            sellerAmount -= royaltyAmount;\n        }\n\n        // Apply marketplace fee\n        uint fee = sell.price * marketplaceFee / feePrecision;\n        processPaymentTo(sell.paymentToken, treasury, fee);\n        sellerAmount -= fee;\n\n        // Send funds to the seller\n        processPaymentTo(sell.paymentToken, sell.owner, sellerAmount);\n\n        // Transfer token\n        IERC721(sell.collection).transferFrom(address(this), msg.sender, sell.tokenId);\n\n        // Close sale\n        sell.active = false;\n\n        emit BuyOrder(msg.sender, sell.collection, sell.tokenId, sell.price, sell.paymentToken, true);\n    }\n\n    /**\n     * @notice sell one or more NFT (ERC1155)\n     * @param _collection Address of the collection\n     * @param _tokenId Token ID of the NFT\n     * @param _amount Amount of tokens to sell\n     * @param _price Price of the bundle (not of the single item)\n     * @param _sellStart Start timestamp of the sell\n     * @param _sellEnd End timestamp of the sell\n     * @param _paymentToken Payment Token used (if 0x000... BNB will be used)\n     */\n    function sell1155(address _collection, uint _tokenId, uint _amount, uint _price, uint _sellStart, uint _sellEnd, address _paymentToken) external {\n        require (whitelist.is1155Whitelisted(_collection), \"SecondaryMarketplace: Collection not whitelisted\");\n        require (IERC1155(_collection).balanceOf(msg.sender, _tokenId) > 0, \"SecondaryMarketplace: Does not have items\");\n        require (whitelist.isPaymentTokenWhitelisted(_paymentToken), \"SecondaryMarketplace: Invalid payment token\");\n        require (_sellEnd > _sellStart, \"SecondaryMarketplace: Invalid dates\");\n        require (_amount > 0, \"SecondaryMarketplace: Cannot sell zero items\");\n\n        // Transfer the token\n        IERC1155(_collection).safeTransferFrom(msg.sender, address(this), _tokenId, _amount, \"\");\n\n        Sell memory sell = Sell({\n            paymentToken: _paymentToken,\n            price: _price,\n            amount: _amount,\n            tokenId: _tokenId,\n            owner: msg.sender,\n            collection: _collection,\n            active: true,\n            id: nextSellId\n        });\n\n        sellOrdersByCollection[_collection].push(nextSellId);\n        sellOrdersByAccount[msg.sender].push(nextSellId);\n        sellOrdersById[nextSellId] = sell;\n\n        nextSellId += 1;\n\n        emit SellOrderCreated(msg.sender, _collection, _tokenId, _price, _paymentToken, false);\n    }\n\n    /**\n     * @notice Remove NFT from listing\n     * @param _index Index of the order\n     */\n    function cancelSell1155(uint _index) external {\n        require (_index < nextSellId, \"SecondaryMarketplace: Invalid index\");\n\n        Sell storage sell = sellOrdersById[_index];\n        require (sell.owner == msg.sender, \"SecondaryMarketplace: Not owner\");\n        require (whitelist.is1155Whitelisted(sell.collection), \"SecondaryMarketplace: Collection not whitelisted\");\n\n        // Transfer the token\n        IERC1155(sell.collection).safeTransferFrom(address(this), msg.sender, sell.tokenId, sell.amount, \"\");\n\n        // Close the order\n        sell.active = false;\n\n        emit SellOrderRemoved(msg.sender, sell.collection, sell.tokenId, sell.price, sell.paymentToken, false);\n\n    }\n\n\n\n\n\n    /**\n     * @notice buy a NFT (ERC1155)\n     * @param _index Index of the order\n     */\n    function buy1155(uint _index) external payable {\n        require (_index < nextSellId, \"SecondaryMarketplace: Invalid index\");\n\n        Sell storage sell = sellOrdersById[_index];\n        require (sell.active, \"SecondaryMarketplace: Already claimed or sold\");\n\n        // Check payment\n        processPaymentFrom(sell.paymentToken, msg.sender, sell.price);\n\n        // Apply marketplace fee\n        uint fee = sell.price * marketplaceFee / feePrecision;\n        processPaymentTo(sell.paymentToken, treasury, fee);\n\n        // Send funds to the seller\n        processPaymentTo(sell.paymentToken, sell.owner, sell.price - fee);\n\n        // Transfer token\n        IERC1155(sell.collection).safeTransferFrom(address(this), msg.sender, sell.tokenId, sell.amount, \"\");\n\n        // Close sale\n        sell.active = false;\n\n        emit BuyOrder(msg.sender, sell.collection, sell.tokenId, sell.price, sell.paymentToken, false);\n\n    }\n\n    /**\n     * @notice Returns the list of orders of a specific collection\n     * @param _collection Collection address\n     */\n    function getSellOrdersByCollection(address _collection) external view returns (uint[] memory) {\n        return sellOrdersByCollection[_collection];\n    }\n\n    /**\n     * @notice Returns the list of orders of a specific account\n     * @param _account Collection address\n     */\n    function getSellOrdersByAccount(address _account) external view returns (uint[] memory) {\n        return sellOrdersByAccount[_account];\n    }\n\n    // PRIVILEGED METHODS\n\n    /**\n     * @notice Change treasury address\n     * @param _treasury New treasury address\n     */\n    function changeTreasury(address _treasury) external onlyOwner {\n        treasury = _treasury;\n    }\n\n    /**\n     * @notice Change fee address\n     * @param _newFee New treasury address\n     */\n    function changeFee(uint _newFee) external onlyOwner {\n        require(_newFee <= maxFee, \"SecondaryMarketplace: fee cannot exceeded max fee\");\n        marketplaceFee = _newFee;\n    }\n\n    /**\n     * @notice Change marketplace whitelist address\n     * @param _marketplaceWhitelist New marketplace whitelist address\n     */\n    function setMarketplaceWhitelist(address _marketplaceWhitelist) external onlyOwner {\n        whitelist = IMarketplaceSecondaryWhitelist(_marketplaceWhitelist);\n    }\n\n    // ERC1155 Receiver\n    function onERC1155Received(address operator, address from, uint256 id, uint256 value, bytes calldata data) external pure override returns (bytes4) {\n        return bytes4(keccak256(\"onERC1155Received(address,address,uint256,uint256,bytes)\"));\n    }\n\n    function onERC1155BatchReceived(address operator, address from, uint256[] calldata ids, uint256[] calldata values, bytes calldata data) external pure override returns (bytes4) {\n        return bytes4(keccak256(\"onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)\"));\n    }\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165) returns (bool) {\n        return supportsInterface(interfaceId);\n    }\n\n    // INTERNAL METHODS\n    // Check whether a NFT smart contract supports royalties through ERC2981\n    function checkRoyaltiesWithERC2981(address _collection) internal view returns (bool) {\n        (bool success) = IERC165(_collection).supportsInterface(_INTERFACE_ID_ERC2981);\n        return success;\n    }\n\n    // Takes funds from the bidder based on the payment token\n    function processPaymentFrom(address _token, address _from, uint _amount) internal {\n        // BNB\n        if (_token == address(0)) {\n            require (msg.value >= _amount, \"Marketplace: not enough funds\");\n        }\n\n        // Other tokens\n        else {\n            IERC20(_token).transferFrom(_from, address(this), _amount);\n        }\n    }\n\n    // Refund a bidder if it gets outbidded\n    function processPaymentTo(address _token, address _to, uint _amount) internal {\n        // BNB\n        if (_token == address(0)) {\n            payable(_to).transfer(_amount);\n        }\n\n        // Other tokens\n        else {\n            IERC20(_token).transfer(_to, _amount);\n        }\n    }\n\n}"
    },
    "/contracts/interface/IMarketplaceSecondaryWhitelist.sol": {
      "content": "// SPDX-License-Identifier: ISC\npragma solidity ^0.8.10;\n\ninterface IMarketplaceSecondaryWhitelist {\n    function is721Whitelisted(address _token) external view returns (bool);\n    function is1155Whitelisted(address _token) external view returns (bool);\n    function getWhitelistedCollections721() external view returns (address[] memory);\n    function getWhitelistedCollections1155() external view returns (address[] memory);\n    function addPaymentTokenToWhitelist(address _token) external;\n    function removePaymentTokenToWhitelist(uint _index) external;\n    function isPaymentTokenWhitelisted(address _token) external view returns (bool);\n    function getWhitelistedPaymentTokens() external view returns (address[] memory);\n}"
    },
    "@openzeppelin/contracts/utils/introspection/IERC165.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[EIP].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30 000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n"
    },
    "@openzeppelin/contracts/utils/introspection/ERC165.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./IERC165.sol\";\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n *\n * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.\n */\nabstract contract ERC165 is IERC165 {\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n        return interfaceId == type(IERC165).interfaceId;\n    }\n}\n"
    },
    "@openzeppelin/contracts/utils/Context.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n}\n"
    },
    "@openzeppelin/contracts/utils/Address.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)\n\npragma solidity ^0.8.1;\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary Address {\n    /**\n     * @dev Returns true if `account` is a contract.\n     *\n     * [IMPORTANT]\n     * ====\n     * It is unsafe to assume that an address for which this function returns\n     * false is an externally-owned account (EOA) and not a contract.\n     *\n     * Among others, `isContract` will return false for the following\n     * types of addresses:\n     *\n     *  - an externally-owned account\n     *  - a contract in construction\n     *  - an address where a contract will be created\n     *  - an address where a contract lived, but was destroyed\n     * ====\n     *\n     * [IMPORTANT]\n     * ====\n     * You shouldn't rely on `isContract` to protect against flash loan attacks!\n     *\n     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets\n     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract\n     * constructor.\n     * ====\n     */\n    function isContract(address account) internal view returns (bool) {\n        // This method relies on extcodesize/address.code.length, which returns 0\n        // for contracts in construction, since the code is only stored at the end\n        // of the constructor execution.\n\n        return account.code.length > 0;\n    }\n\n    /**\n     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n     * `recipient`, forwarding all available gas and reverting on errors.\n     *\n     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n     * of certain opcodes, possibly making contracts go over the 2300 gas limit\n     * imposed by `transfer`, making them unable to receive funds via\n     * `transfer`. {sendValue} removes this limitation.\n     *\n     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n     *\n     * IMPORTANT: because control is transferred to `recipient`, care must be\n     * taken to not create reentrancy vulnerabilities. Consider using\n     * {ReentrancyGuard} or the\n     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n     */\n    function sendValue(address payable recipient, uint256 amount) internal {\n        require(address(this).balance >= amount, \"Address: insufficient balance\");\n\n        (bool success, ) = recipient.call{value: amount}(\"\");\n        require(success, \"Address: unable to send value, recipient may have reverted\");\n    }\n\n    /**\n     * @dev Performs a Solidity function call using a low level `call`. A\n     * plain `call` is an unsafe replacement for a function call: use this\n     * function instead.\n     *\n     * If `target` reverts with a revert reason, it is bubbled up by this\n     * function (like regular Solidity function calls).\n     *\n     * Returns the raw returned data. To convert to the expected return value,\n     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n     *\n     * Requirements:\n     *\n     * - `target` must be a contract.\n     * - calling `target` with `data` must not revert.\n     *\n     * _Available since v3.1._\n     */\n    function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n        return functionCall(target, data, \"Address: low-level call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with\n     * `errorMessage` as a fallback revert reason when `target` reverts.\n     *\n     * _Available since v3.1._\n     */\n    function functionCall(\n        address target,\n        bytes memory data,\n        string memory errorMessage\n    ) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, 0, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but also transferring `value` wei to `target`.\n     *\n     * Requirements:\n     *\n     * - the calling contract must have an ETH balance of at least `value`.\n     * - the called Solidity function must be `payable`.\n     *\n     * _Available since v3.1._\n     */\n    function functionCallWithValue(\n        address target,\n        bytes memory data,\n        uint256 value\n    ) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, value, \"Address: low-level call with value failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but\n     * with `errorMessage` as a fallback revert reason when `target` reverts.\n     *\n     * _Available since v3.1._\n     */\n    function functionCallWithValue(\n        address target,\n        bytes memory data,\n        uint256 value,\n        string memory errorMessage\n    ) internal returns (bytes memory) {\n        require(address(this).balance >= value, \"Address: insufficient balance for call\");\n        require(isContract(target), \"Address: call to non-contract\");\n\n        (bool success, bytes memory returndata) = target.call{value: value}(data);\n        return verifyCallResult(success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a static call.\n     *\n     * _Available since v3.3._\n     */\n    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n        return functionStaticCall(target, data, \"Address: low-level static call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n     * but performing a static call.\n     *\n     * _Available since v3.3._\n     */\n    function functionStaticCall(\n        address target,\n        bytes memory data,\n        string memory errorMessage\n    ) internal view returns (bytes memory) {\n        require(isContract(target), \"Address: static call to non-contract\");\n\n        (bool success, bytes memory returndata) = target.staticcall(data);\n        return verifyCallResult(success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a delegate call.\n     *\n     * _Available since v3.4._\n     */\n    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {\n        return functionDelegateCall(target, data, \"Address: low-level delegate call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n     * but performing a delegate call.\n     *\n     * _Available since v3.4._\n     */\n    function functionDelegateCall(\n        address target,\n        bytes memory data,\n        string memory errorMessage\n    ) internal returns (bytes memory) {\n        require(isContract(target), \"Address: delegate call to non-contract\");\n\n        (bool success, bytes memory returndata) = target.delegatecall(data);\n        return verifyCallResult(success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the\n     * revert reason using the provided one.\n     *\n     * _Available since v4.3._\n     */\n    function verifyCallResult(\n        bool success,\n        bytes memory returndata,\n        string memory errorMessage\n    ) internal pure returns (bytes memory) {\n        if (success) {\n            return returndata;\n        } else {\n            // Look for revert reason and bubble it up if present\n            if (returndata.length > 0) {\n                // The easiest way to bubble the revert reason is using memory via assembly\n                /// @solidity memory-safe-assembly\n                assembly {\n                    let returndata_size := mload(returndata)\n                    revert(add(32, returndata), returndata_size)\n                }\n            } else {\n                revert(errorMessage);\n            }\n        }\n    }\n}\n"
    },
    "@openzeppelin/contracts/token/common/ERC2981.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (token/common/ERC2981.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../../interfaces/IERC2981.sol\";\nimport \"../../utils/introspection/ERC165.sol\";\n\n/**\n * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.\n *\n * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for\n * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.\n *\n * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the\n * fee is specified in basis points by default.\n *\n * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See\n * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to\n * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.\n *\n * _Available since v4.5._\n */\nabstract contract ERC2981 is IERC2981, ERC165 {\n    struct RoyaltyInfo {\n        address receiver;\n        uint96 royaltyFraction;\n    }\n\n    RoyaltyInfo private _defaultRoyaltyInfo;\n    mapping(uint256 => RoyaltyInfo) private _tokenRoyaltyInfo;\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {\n        return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @inheritdoc IERC2981\n     */\n    function royaltyInfo(uint256 _tokenId, uint256 _salePrice) public view virtual override returns (address, uint256) {\n        RoyaltyInfo memory royalty = _tokenRoyaltyInfo[_tokenId];\n\n        if (royalty.receiver == address(0)) {\n            royalty = _defaultRoyaltyInfo;\n        }\n\n        uint256 royaltyAmount = (_salePrice * royalty.royaltyFraction) / _feeDenominator();\n\n        return (royalty.receiver, royaltyAmount);\n    }\n\n    /**\n     * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a\n     * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an\n     * override.\n     */\n    function _feeDenominator() internal pure virtual returns (uint96) {\n        return 10000;\n    }\n\n    /**\n     * @dev Sets the royalty information that all ids in this contract will default to.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {\n        require(feeNumerator <= _feeDenominator(), \"ERC2981: royalty fee will exceed salePrice\");\n        require(receiver != address(0), \"ERC2981: invalid receiver\");\n\n        _defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Removes default royalty information.\n     */\n    function _deleteDefaultRoyalty() internal virtual {\n        delete _defaultRoyaltyInfo;\n    }\n\n    /**\n     * @dev Sets the royalty information for a specific token id, overriding the global default.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setTokenRoyalty(\n        uint256 tokenId,\n        address receiver,\n        uint96 feeNumerator\n    ) internal virtual {\n        require(feeNumerator <= _feeDenominator(), \"ERC2981: royalty fee will exceed salePrice\");\n        require(receiver != address(0), \"ERC2981: Invalid parameters\");\n\n        _tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Resets royalty information for the token id back to the global default.\n     */\n    function _resetTokenRoyalty(uint256 tokenId) internal virtual {\n        delete _tokenRoyaltyInfo[tokenId];\n    }\n}\n"
    },
    "@openzeppelin/contracts/token/ERC721/IERC721.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/IERC721.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../../utils/introspection/IERC165.sol\";\n\n/**\n * @dev Required interface of an ERC721 compliant contract.\n */\ninterface IERC721 is IERC165 {\n    /**\n     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n     */\n    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.\n     */\n    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n    /**\n     * @dev Returns the number of tokens in ``owner``'s account.\n     */\n    function balanceOf(address owner) external view returns (uint256 balance);\n\n    /**\n     * @dev Returns the owner of the `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function ownerOf(uint256 tokenId) external view returns (address owner);\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(\n        address from,\n        address to,\n        uint256 tokenId,\n        bytes calldata data\n    ) external;\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients\n     * are aware of the ERC721 protocol to prevent tokens from being forever locked.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(\n        address from,\n        address to,\n        uint256 tokenId\n    ) external;\n\n    /**\n     * @dev Transfers `tokenId` token from `from` to `to`.\n     *\n     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(\n        address from,\n        address to,\n        uint256 tokenId\n    ) external;\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n     * The approval is cleared when the token is transferred.\n     *\n     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.\n     *\n     * Requirements:\n     *\n     * - The caller must own the token or be an approved operator.\n     * - `tokenId` must exist.\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address to, uint256 tokenId) external;\n\n    /**\n     * @dev Approve or remove `operator` as an operator for the caller.\n     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.\n     *\n     * Requirements:\n     *\n     * - The `operator` cannot be the caller.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function setApprovalForAll(address operator, bool _approved) external;\n\n    /**\n     * @dev Returns the account approved for `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function getApproved(uint256 tokenId) external view returns (address operator);\n\n    /**\n     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n     *\n     * See {setApprovalForAll}\n     */\n    function isApprovedForAll(address owner, address operator) external view returns (bool);\n}\n"
    },
    "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/utils/SafeERC20.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../IERC20.sol\";\nimport \"../extensions/draft-IERC20Permit.sol\";\nimport \"../../../utils/Address.sol\";\n\n/**\n * @title SafeERC20\n * @dev Wrappers around ERC20 operations that throw on failure (when the token\n * contract returns false). Tokens that return no value (and instead revert or\n * throw on failure) are also supported, non-reverting calls are assumed to be\n * successful.\n * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,\n * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.\n */\nlibrary SafeERC20 {\n    using Address for address;\n\n    function safeTransfer(\n        IERC20 token,\n        address to,\n        uint256 value\n    ) internal {\n        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));\n    }\n\n    function safeTransferFrom(\n        IERC20 token,\n        address from,\n        address to,\n        uint256 value\n    ) internal {\n        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));\n    }\n\n    /**\n     * @dev Deprecated. This function has issues similar to the ones found in\n     * {IERC20-approve}, and its usage is discouraged.\n     *\n     * Whenever possible, use {safeIncreaseAllowance} and\n     * {safeDecreaseAllowance} instead.\n     */\n    function safeApprove(\n        IERC20 token,\n        address spender,\n        uint256 value\n    ) internal {\n        // safeApprove should only be called when setting an initial allowance,\n        // or when resetting it to zero. To increase and decrease it, use\n        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'\n        require(\n            (value == 0) || (token.allowance(address(this), spender) == 0),\n            \"SafeERC20: approve from non-zero to non-zero allowance\"\n        );\n        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));\n    }\n\n    function safeIncreaseAllowance(\n        IERC20 token,\n        address spender,\n        uint256 value\n    ) internal {\n        uint256 newAllowance = token.allowance(address(this), spender) + value;\n        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));\n    }\n\n    function safeDecreaseAllowance(\n        IERC20 token,\n        address spender,\n        uint256 value\n    ) internal {\n        unchecked {\n            uint256 oldAllowance = token.allowance(address(this), spender);\n            require(oldAllowance >= value, \"SafeERC20: decreased allowance below zero\");\n            uint256 newAllowance = oldAllowance - value;\n            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));\n        }\n    }\n\n    function safePermit(\n        IERC20Permit token,\n        address owner,\n        address spender,\n        uint256 value,\n        uint256 deadline,\n        uint8 v,\n        bytes32 r,\n        bytes32 s\n    ) internal {\n        uint256 nonceBefore = token.nonces(owner);\n        token.permit(owner, spender, value, deadline, v, r, s);\n        uint256 nonceAfter = token.nonces(owner);\n        require(nonceAfter == nonceBefore + 1, \"SafeERC20: permit did not succeed\");\n    }\n\n    /**\n     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement\n     * on the return value: the return value is optional (but if data is returned, it must not be false).\n     * @param token The token targeted by the call.\n     * @param data The call data (encoded using abi.encode or one of its variants).\n     */\n    function _callOptionalReturn(IERC20 token, bytes memory data) private {\n        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since\n        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that\n        // the target address contains contract code and also asserts for success in the low-level call.\n\n        bytes memory returndata = address(token).functionCall(data, \"SafeERC20: low-level call failed\");\n        if (returndata.length > 0) {\n            // Return data is optional\n            require(abi.decode(returndata, (bool)), \"SafeERC20: ERC20 operation did not succeed\");\n        }\n    }\n}\n"
    },
    "@openzeppelin/contracts/token/ERC20/extensions/draft-IERC20Permit.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in\n * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].\n *\n * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by\n * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't\n * need to send a transaction, and thus is not required to hold Ether at all.\n */\ninterface IERC20Permit {\n    /**\n     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,\n     * given ``owner``'s signed approval.\n     *\n     * IMPORTANT: The same issues {IERC20-approve} has related to transaction\n     * ordering also apply here.\n     *\n     * Emits an {Approval} event.\n     *\n     * Requirements:\n     *\n     * - `spender` cannot be the zero address.\n     * - `deadline` must be a timestamp in the future.\n     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`\n     * over the EIP712-formatted function arguments.\n     * - the signature must use ``owner``'s current nonce (see {nonces}).\n     *\n     * For more information on the signature format, see the\n     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP\n     * section].\n     */\n    function permit(\n        address owner,\n        address spender,\n        uint256 value,\n        uint256 deadline,\n        uint8 v,\n        bytes32 r,\n        bytes32 s\n    ) external;\n\n    /**\n     * @dev Returns the current nonce for `owner`. This value must be\n     * included whenever a signature is generated for {permit}.\n     *\n     * Every successful call to {permit} increases ``owner``'s nonce by one. This\n     * prevents a signature from being used multiple times.\n     */\n    function nonces(address owner) external view returns (uint256);\n\n    /**\n     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.\n     */\n    // solhint-disable-next-line func-name-mixedcase\n    function DOMAIN_SEPARATOR() external view returns (bytes32);\n}\n"
    },
    "@openzeppelin/contracts/token/ERC20/IERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC20 standard as defined in the EIP.\n */\ninterface IERC20 {\n    /**\n     * @dev Emitted when `value` tokens are moved from one account (`from`) to\n     * another (`to`).\n     *\n     * Note that `value` may be zero.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 value);\n\n    /**\n     * @dev Emitted when the allowance of a `spender` for an `owner` is set by\n     * a call to {approve}. `value` is the new allowance.\n     */\n    event Approval(address indexed owner, address indexed spender, uint256 value);\n\n    /**\n     * @dev Returns the amount of tokens in existence.\n     */\n    function totalSupply() external view returns (uint256);\n\n    /**\n     * @dev Returns the amount of tokens owned by `account`.\n     */\n    function balanceOf(address account) external view returns (uint256);\n\n    /**\n     * @dev Moves `amount` tokens from the caller's account to `to`.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transfer(address to, uint256 amount) external returns (bool);\n\n    /**\n     * @dev Returns the remaining number of tokens that `spender` will be\n     * allowed to spend on behalf of `owner` through {transferFrom}. This is\n     * zero by default.\n     *\n     * This value changes when {approve} or {transferFrom} are called.\n     */\n    function allowance(address owner, address spender) external view returns (uint256);\n\n    /**\n     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * IMPORTANT: Beware that changing an allowance with this method brings the risk\n     * that someone may use both the old and the new allowance by unfortunate\n     * transaction ordering. One possible solution to mitigate this race\n     * condition is to first reduce the spender's allowance to 0 and set the\n     * desired value afterwards:\n     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address spender, uint256 amount) external returns (bool);\n\n    /**\n     * @dev Moves `amount` tokens from `from` to `to` using the\n     * allowance mechanism. `amount` is then deducted from the caller's\n     * allowance.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(\n        address from,\n        address to,\n        uint256 amount\n    ) external returns (bool);\n}\n"
    },
    "@openzeppelin/contracts/token/ERC1155/IERC1155Receiver.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC1155/IERC1155Receiver.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../../utils/introspection/IERC165.sol\";\n\n/**\n * @dev _Available since v3.1._\n */\ninterface IERC1155Receiver is IERC165 {\n    /**\n     * @dev Handles the receipt of a single ERC1155 token type. This function is\n     * called at the end of a `safeTransferFrom` after the balance has been updated.\n     *\n     * NOTE: To accept the transfer, this must return\n     * `bytes4(keccak256(\"onERC1155Received(address,address,uint256,uint256,bytes)\"))`\n     * (i.e. 0xf23a6e61, or its own function selector).\n     *\n     * @param operator The address which initiated the transfer (i.e. msg.sender)\n     * @param from The address which previously owned the token\n     * @param id The ID of the token being transferred\n     * @param value The amount of tokens being transferred\n     * @param data Additional data with no specified format\n     * @return `bytes4(keccak256(\"onERC1155Received(address,address,uint256,uint256,bytes)\"))` if transfer is allowed\n     */\n    function onERC1155Received(\n        address operator,\n        address from,\n        uint256 id,\n        uint256 value,\n        bytes calldata data\n    ) external returns (bytes4);\n\n    /**\n     * @dev Handles the receipt of a multiple ERC1155 token types. This function\n     * is called at the end of a `safeBatchTransferFrom` after the balances have\n     * been updated.\n     *\n     * NOTE: To accept the transfer(s), this must return\n     * `bytes4(keccak256(\"onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)\"))`\n     * (i.e. 0xbc197c81, or its own function selector).\n     *\n     * @param operator The address which initiated the batch transfer (i.e. msg.sender)\n     * @param from The address which previously owned the token\n     * @param ids An array containing ids of each token being transferred (order and length must match values array)\n     * @param values An array containing amounts of each token being transferred (order and length must match ids array)\n     * @param data Additional data with no specified format\n     * @return `bytes4(keccak256(\"onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)\"))` if transfer is allowed\n     */\n    function onERC1155BatchReceived(\n        address operator,\n        address from,\n        uint256[] calldata ids,\n        uint256[] calldata values,\n        bytes calldata data\n    ) external returns (bytes4);\n}\n"
    },
    "@openzeppelin/contracts/token/ERC1155/IERC1155.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC1155/IERC1155.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../../utils/introspection/IERC165.sol\";\n\n/**\n * @dev Required interface of an ERC1155 compliant contract, as defined in the\n * https://eips.ethereum.org/EIPS/eip-1155[EIP].\n *\n * _Available since v3.1._\n */\ninterface IERC1155 is IERC165 {\n    /**\n     * @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.\n     */\n    event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);\n\n    /**\n     * @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all\n     * transfers.\n     */\n    event TransferBatch(\n        address indexed operator,\n        address indexed from,\n        address indexed to,\n        uint256[] ids,\n        uint256[] values\n    );\n\n    /**\n     * @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to\n     * `approved`.\n     */\n    event ApprovalForAll(address indexed account, address indexed operator, bool approved);\n\n    /**\n     * @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.\n     *\n     * If an {URI} event was emitted for `id`, the standard\n     * https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value\n     * returned by {IERC1155MetadataURI-uri}.\n     */\n    event URI(string value, uint256 indexed id);\n\n    /**\n     * @dev Returns the amount of tokens of token type `id` owned by `account`.\n     *\n     * Requirements:\n     *\n     * - `account` cannot be the zero address.\n     */\n    function balanceOf(address account, uint256 id) external view returns (uint256);\n\n    /**\n     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.\n     *\n     * Requirements:\n     *\n     * - `accounts` and `ids` must have the same length.\n     */\n    function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)\n        external\n        view\n        returns (uint256[] memory);\n\n    /**\n     * @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,\n     *\n     * Emits an {ApprovalForAll} event.\n     *\n     * Requirements:\n     *\n     * - `operator` cannot be the caller.\n     */\n    function setApprovalForAll(address operator, bool approved) external;\n\n    /**\n     * @dev Returns true if `operator` is approved to transfer ``account``'s tokens.\n     *\n     * See {setApprovalForAll}.\n     */\n    function isApprovedForAll(address account, address operator) external view returns (bool);\n\n    /**\n     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.\n     *\n     * Emits a {TransferSingle} event.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - If the caller is not `from`, it must have been approved to spend ``from``'s tokens via {setApprovalForAll}.\n     * - `from` must have a balance of tokens of type `id` of at least `amount`.\n     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the\n     * acceptance magic value.\n     */\n    function safeTransferFrom(\n        address from,\n        address to,\n        uint256 id,\n        uint256 amount,\n        bytes calldata data\n    ) external;\n\n    /**\n     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.\n     *\n     * Emits a {TransferBatch} event.\n     *\n     * Requirements:\n     *\n     * - `ids` and `amounts` must have the same length.\n     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the\n     * acceptance magic value.\n     */\n    function safeBatchTransferFrom(\n        address from,\n        address to,\n        uint256[] calldata ids,\n        uint256[] calldata amounts,\n        bytes calldata data\n    ) external;\n}\n"
    },
    "@openzeppelin/contracts/interfaces/IERC2981.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.6.0) (interfaces/IERC2981.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../utils/introspection/IERC165.sol\";\n\n/**\n * @dev Interface for the NFT Royalty Standard.\n *\n * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal\n * support for royalty payments across all NFT marketplaces and ecosystem participants.\n *\n * _Available since v4.5._\n */\ninterface IERC2981 is IERC165 {\n    /**\n     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of\n     * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.\n     */\n    function royaltyInfo(uint256 tokenId, uint256 salePrice)\n        external\n        view\n        returns (address receiver, uint256 royaltyAmount);\n}\n"
    },
    "@openzeppelin/contracts/access/Ownable.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../utils/Context.sol\";\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * By default, the owner account will be the one that deploys the contract. This\n * can later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n    address private _owner;\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the deployer as the initial owner.\n     */\n    constructor() {\n        _transferOwnership(_msgSender());\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        require(owner() == _msgSender(), \"Ownable: caller is not the owner\");\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions anymore. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby removing any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        require(newOwner != address(0), \"Ownable: new owner is the zero address\");\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        address oldOwner = _owner;\n        _owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n}\n"
    }
  },
  "settings": {
    "remappings": [],
    "optimizer": {
      "enabled": true,
      "runs": 200
    },
    "evmVersion": "london",
    "libraries": {},
    "outputSelection": {
      "*": {
        "*": [
          "evm.bytecode",
          "evm.deployedBytecode",
          "devdoc",
          "userdoc",
          "metadata",
          "abi"
        ]
      }
    }
  }
}