Upload papers.csv

papers.csv

@@ -583,7 +583,7 @@ very well reflected in the thorough evaluations of the different
 technologies available today in the marketplace, done by customers
 looking for a technology that will best fit their needs. This is
 actually why most of us are here today.",,,,,,
-"['Loney, D.A.', 'Zhou, W.', 'Rosen, D.W.', 'Degertekin, F.L.', 'Fedorov, A.G.']",2021-09-30T13:33:59Z,2021-09-30T13:33:59Z,9/23/10,Mechanical Engineering,,"['https://hdl.handle.net/2152/88240', 'http://dx.doi.org/10.26153/tsw/15181']",eng,2010 International Solid Freeform Fabrication Symposium,Open,"['acoustics', 'Additive Manufacturing via Microarray Deposition', 'ultrasonic atomizer', 'high viscosity fluid injection', '3D inkjet manufacturing']",Acoustic Analysis of Viscous Fluid Ejection Using Ultrasonic Atomizer,Conference paper,https://repositories.lib.utexas.edu//bitstreams/3b9a63a6-f12b-4c12-bda1-4baac0a43cca/download,University of Texas at Austin,"The acoustics of the Additive Manufacturing via Microarray Deposition (AMMD) system
+"['Loney, D.A.', 'Zhou, W.', 'Rosen, D.W.', 'Degertekin, F.L.', 'Fedorov, A.G.']",2021-09-30T13:33:59Z,2021-09-30T13:33:59Z,2010,Mechanical Engineering,,"['https://hdl.handle.net/2152/88240', 'http://dx.doi.org/10.26153/tsw/15181']",eng,2010 International Solid Freeform Fabrication Symposium,Open,"['acoustics', 'Additive Manufacturing via Microarray Deposition', 'ultrasonic atomizer', 'high viscosity fluid injection', '3D inkjet manufacturing']",Acoustic Analysis of Viscous Fluid Ejection Using Ultrasonic Atomizer,Conference paper,https://repositories.lib.utexas.edu//bitstreams/3b9a63a6-f12b-4c12-bda1-4baac0a43cca/download,University of Texas at Austin,"The acoustics of the Additive Manufacturing via Microarray Deposition (AMMD) system
 based on a ultrasonic atomizer is investigated for printing high viscosity fluids for 3D inkjet
 manufacturing applications. The ultrasonic atomizer incorporates a piezoelectric transducer, a
 material reservoir, and a silicon micromachined array of acoustic horn structures as ejection
@@ -731,7 +731,7 @@ processes such as cold work, machining or inspection. The relative influence of
 Cost implications for the different approaches will be highlighted based upon the type of process being utilized.
 Examples are provided where both robotic and CNC options have been evaluated and the best solution found.",,,,,,
 "['Aydin, I.', 'Akarcay, E.', 'Gumus, O.F.', 'Yelek, H.', 'Engin, C.B.']",2021-11-30T22:13:34Z,2021-11-30T22:13:34Z,2019,Mechanical Engineering,,"['https://hdl.handle.net/2152/90567', 'http://dx.doi.org/10.26153/tsw/17486']",eng,2019 International Solid Freeform Fabrication Symposium,Open,"['additive manufacturing', 'finite element analysis', 'lattice structures', 'maraging steel', 'mechanical properties', 'vehicle door hinge']",Additive Manufactured Lightweight Vehicle Door Hinge with Hybrid Lattice Structure,Conference paper,https://repositories.lib.utexas.edu//bitstreams/f98a37b5-6776-4877-930b-6998f55c0a90/download,University of Texas at Austin,,,This paper presents an approach to finite element analysis of regulation to simulate mechanical behavior of door hinge with hybrid lattice structures.,,,,
-"['Ivanova, Olga S.', 'Williams, Christopher B.', 'Campbell, Thomas A.']",2021-10-05T15:12:05Z,2021-10-05T15:12:05Z,8/17/11,Mechanical Engineering,,"['https://hdl.handle.net/2152/88390', 'http://dx.doi.org/10.26153/tsw/15329']",eng,2011 International Solid Freeform Fabrication Symposium,Open,"['Additive Manufacturing', 'nanomaterials', 'nanotechnology', 'AM technologies']",Additive Manufacturing (AM) and Nanotechnology: Promises and Challenges,Conference paper,https://repositories.lib.utexas.edu//bitstreams/b578771f-89c4-4e6a-bd1b-26e42d0cc50a/download,University of Texas at Austin,"The narrow choice of materials used in Additive Manufacturing (AM) remains a key
+"['Ivanova, Olga S.', 'Williams, Christopher B.', 'Campbell, Thomas A.']",2021-10-05T15:12:05Z,2021-10-05T15:12:05Z,2011,Mechanical Engineering,,"['https://hdl.handle.net/2152/88390', 'http://dx.doi.org/10.26153/tsw/15329']",eng,2011 International Solid Freeform Fabrication Symposium,Open,"['Additive Manufacturing', 'nanomaterials', 'nanotechnology', 'AM technologies']",Additive Manufacturing (AM) and Nanotechnology: Promises and Challenges,Conference paper,https://repositories.lib.utexas.edu//bitstreams/b578771f-89c4-4e6a-bd1b-26e42d0cc50a/download,University of Texas at Austin,"The narrow choice of materials used in Additive Manufacturing (AM) remains a key
 limitation to more advanced systems. Nanomaterials offer the potential to advance AM materials
 through modification of their fundamental material properties. In this paper, the authors provide
 a review of available published literature in which nanostructures are incorporated into AM
@@ -748,7 +748,7 @@ at Mach 92. However, before the education activities are discussed it is useful
 the AM research landscape in the UK as this will give an indication of the level of activity
 It should be noted that there will also be a considerable number of organisations
 involved in using AM but not involved in research.",,,,,,
-"['Dey, N.K.', 'Liou, F.W.', 'Nedic, C.']",2021-10-12T17:55:55Z,2021-10-12T17:55:55Z,8/16/13,Mechanical Engineering,,"['https://hdl.handle.net/2152/88707', 'http://dx.doi.org/10.26153/tsw/15641']",eng,2013 International Solid Freeform Fabrication Symposium,Open,"['additive manufacturing', 'laser deposition', 'titanium', 'Ti-6Al-4V', 'aerospace repair']",Additive Manufacturing Laser Deposition of Ti-6Al-4V for Aerospace Repair Applications,Conference paper,https://repositories.lib.utexas.edu//bitstreams/895a2fc0-e880-4da6-aa51-6a01b0fbbcc8/download,University of Texas at Austin,"Parts or products from high performance metal are very
+"['Dey, N.K.', 'Liou, F.W.', 'Nedic, C.']",2021-10-12T17:55:55Z,2021-10-12T17:55:55Z,2013,Mechanical Engineering,,"['https://hdl.handle.net/2152/88707', 'http://dx.doi.org/10.26153/tsw/15641']",eng,2013 International Solid Freeform Fabrication Symposium,Open,"['additive manufacturing', 'laser deposition', 'titanium', 'Ti-6Al-4V', 'aerospace repair']",Additive Manufacturing Laser Deposition of Ti-6Al-4V for Aerospace Repair Applications,Conference paper,https://repositories.lib.utexas.edu//bitstreams/895a2fc0-e880-4da6-aa51-6a01b0fbbcc8/download,University of Texas at Austin,"Parts or products from high performance metal are very
 expensive, partly due to the processing complexities during
 manufacturing. The purpose of this project is to use additive
 laser deposition and machining processes to repair titanium
@@ -1039,7 +1039,7 @@ far, and the technical possibilities that opens this technology from the enginee
 of view. In addition we propose some improvements that could be perfectly feasible in
 the short term. For this purpose, the assembly of a RepRap Mendel Prusa was
 performed, but with some modifications.",,,,,,
-"['Chen, Yong', 'Zhou, Chi', 'Luo, Jingyuan']",2021-09-30T13:13:31Z,2021-09-30T13:13:31Z,9/23/10,Mechanical Engineering,,"['https://hdl.handle.net/2152/88228', 'http://dx.doi.org/10.26153/tsw/15169']",eng,2010 International Solid Freeform Fabrication Symposium,Open,"['additive manufacturing', '5-axis SFF', 'CNC accumulation', 'build around inserts']",Additive Manufacturing without Layers: A New Solid Freeform Fabrication Process based on CNC Accumulation,Conference paper,https://repositories.lib.utexas.edu//bitstreams/2d201dda-a4e9-40f2-9bb2-c19d3d1aea3a/download,University of Texas at Austin,"Most current additive manufacturing processes are layer-based, that is building a physical model
+"['Chen, Yong', 'Zhou, Chi', 'Luo, Jingyuan']",2021-09-30T13:13:31Z,2021-09-30T13:13:31Z,2010,Mechanical Engineering,,"['https://hdl.handle.net/2152/88228', 'http://dx.doi.org/10.26153/tsw/15169']",eng,2010 International Solid Freeform Fabrication Symposium,Open,"['additive manufacturing', '5-axis SFF', 'CNC accumulation', 'build around inserts']",Additive Manufacturing without Layers: A New Solid Freeform Fabrication Process based on CNC Accumulation,Conference paper,https://repositories.lib.utexas.edu//bitstreams/2d201dda-a4e9-40f2-9bb2-c19d3d1aea3a/download,University of Texas at Austin,"Most current additive manufacturing processes are layer-based, that is building a physical model
 layer-by-layer. By converting 3-dimensional geometry into 2-dimensional contours, the layer-based
 approach can dramatically simplify the process planning steps. However, there are also drawbacks
 associated with the layer-based approach such as inconsistent material properties between various
@@ -1148,7 +1148,7 @@ development of advanced ceramic materials and processes for three-dimensional pr
 Foundation to develop a biocompatible alumina-based system for medical and dental
 applications. Materials design, characterization, and processing considerations will be
 discussed.",,,,,,
-"['Lyons, Alan', 'Krishnan, Shankar', 'Mullins, John', 'Hodes, Marc', 'Hernon, Domhnaill']",2021-09-29T18:17:14Z,2021-09-29T18:17:14Z,9/15/09,Mechanical Engineering,,"['https://hdl.handle.net/2152/88207', 'http://dx.doi.org/10.26153/tsw/15148']",eng,2009 International Solid Freeform Fabrication Symposium,Open,"['heat sinks', 'heat sink designs', 'three-dimensional printing', 'monolithic copper structures']",Advanced Heat Sinks Enabled by Three-Dimensional Printing,Conference paper,https://repositories.lib.utexas.edu//bitstreams/8e6ba00c-afce-483f-a4e1-db50217237a8/download,University of Texas at Austin,"With the rapid rise in power dissipated by integrated circuits, improved heat sinks designs
+"['Lyons, Alan', 'Krishnan, Shankar', 'Mullins, John', 'Hodes, Marc', 'Hernon, Domhnaill']",2021-09-29T18:17:14Z,2021-09-29T18:17:14Z,2009,Mechanical Engineering,,"['https://hdl.handle.net/2152/88207', 'http://dx.doi.org/10.26153/tsw/15148']",eng,2009 International Solid Freeform Fabrication Symposium,Open,"['heat sinks', 'heat sink designs', 'three-dimensional printing', 'monolithic copper structures']",Advanced Heat Sinks Enabled by Three-Dimensional Printing,Conference paper,https://repositories.lib.utexas.edu//bitstreams/8e6ba00c-afce-483f-a4e1-db50217237a8/download,University of Texas at Austin,"With the rapid rise in power dissipated by integrated circuits, improved heat sinks designs
 are needed to decrease the thermal resistance between them and forced air streams.
 Manufacturing methods such as extrusion, machining and die-casting have been used to fabricate
 conventional longitudinal fin designs. Although these technologies add relatively little cost, they
@@ -1164,7 +1164,7 @@ silicon into the as fabricated carbon preform, which finally yielded a dense SiS
 SEM analysis revealed a microstructure consisting of uniformly dispersed β-SiC grains in a
 matrix of silicon. The LOM fabricated material exhibited an average four point bending
 strength and Youngs modulus of 115 MPa and 165 GPa, respectively.",,,,,,
-"['Petrzelka, Joseph E.', 'Frank, Matthew C.']",2021-09-28T19:58:30Z,2021-09-28T19:58:30Z,2009-09,Mechanical Engineering,,"['https://hdl.handle.net/2152/88167', 'http://dx.doi.org/10.26153/tsw/15108']",eng,2009 International Solid Freeform Fabrication Symposium,Open,"['Subtractive Rapid Prototying', 'STL models', 'layer-based removal processing', 'tool accessibility']",Advanced Process Planning for Subtractive Rapid Prototyping,Conference paper,https://repositories.lib.utexas.edu//bitstreams/cfbe24e4-e8ab-4024-9751-eba262a2ec7d/download,University of Texas at Austin,"This paper presents process planning methods for Subtractive Rapid Prototyping, which deals with
+"['Petrzelka, Joseph E.', 'Frank, Matthew C.']",2021-09-28T19:58:30Z,2021-09-28T19:58:30Z,2009,Mechanical Engineering,,"['https://hdl.handle.net/2152/88167', 'http://dx.doi.org/10.26153/tsw/15108']",eng,2009 International Solid Freeform Fabrication Symposium,Open,"['Subtractive Rapid Prototying', 'STL models', 'layer-based removal processing', 'tool accessibility']",Advanced Process Planning for Subtractive Rapid Prototyping,Conference paper,https://repositories.lib.utexas.edu//bitstreams/cfbe24e4-e8ab-4024-9751-eba262a2ec7d/download,University of Texas at Austin,"This paper presents process planning methods for Subtractive Rapid Prototyping, which deals with
 multiple setup operations and the related issues of stock material management. Subtractive Rapid
 Prototyping (SRP) borrows from additive rapid prototyping technologies by using 2½D layer based
 toolpath processing; however, it is limited by tool accessibility. To counter the accessibility problem,
@@ -1210,7 +1210,7 @@ eliminated previously noted contamination ofthe optics by a byproduct which mass
 spectroscopy identifies as silicon dioxide. This paper reviews a cause of non-uniform growth and
 delTIOnstrates the addition of hydrogen and reduced scan speeds to lTIake lTIultilayer parts. In
 addition, it presents a lTIethod for in-situ measurement of height of deposited material.",,,,,,
-"['Amado, A.', 'Schmid, M.', 'Levy, G.', 'Wegener, K.']",2021-10-05T13:30:38Z,2021-10-05T13:30:38Z,8/17/11,Mechanical Engineering,,"['https://hdl.handle.net/2152/88367', 'http://dx.doi.org/10.26153/tsw/15306']",eng,2011 International Solid Freeform Fabrication Symposium,Open,"['Selective Laser Sintering', 'powder characterization', 'powder flow processing']",Advances in SLS Powder Characterization,Conference paper,https://repositories.lib.utexas.edu//bitstreams/7166d153-eff1-4b21-8889-c1a8a20c3b01/download,University of Texas at Austin,"This paper introduces a new Selective Laser Sintering (SLS) powder characterization
+"['Amado, A.', 'Schmid, M.', 'Levy, G.', 'Wegener, K.']",2021-10-05T13:30:38Z,2021-10-05T13:30:38Z,2011,Mechanical Engineering,,"['https://hdl.handle.net/2152/88367', 'http://dx.doi.org/10.26153/tsw/15306']",eng,2011 International Solid Freeform Fabrication Symposium,Open,"['Selective Laser Sintering', 'powder characterization', 'powder flow processing']",Advances in SLS Powder Characterization,Conference paper,https://repositories.lib.utexas.edu//bitstreams/7166d153-eff1-4b21-8889-c1a8a20c3b01/download,University of Texas at Austin,"This paper introduces a new Selective Laser Sintering (SLS) powder characterization
 methodology. A better understanding regarding powder flow processing range is targeted.
 Intrinsic properties of polymers are given from the basic chemical structure and non-intrinsic
 ones describe characteristics caused from pre-processing and production. The non-intrinsic ones
@@ -1233,7 +1233,7 @@ formed the foundation for this progress originated within the
 Process, Chemistry and Software departments of 3D Systems.
 The following is a listing, and brief description, of the key
 features of each of these advances.",,,,,,
-"['Sercombe, T.B.', 'Schaffer, G.B.']",2020-02-12T15:06:37Z,2020-02-12T15:06:37Z,8/20/04,Mechanical Engineering,,"['https://hdl.handle.net/2152/79934', 'http://dx.doi.org/10.26153/tsw/6960']",eng,2004 International Solid Freeform Fabrication Symposium,Open,Selective Laser Sintering,Advances in the Production of Infiltrated Aluminium Parts Using Selective Laser Sintering,Conference paper,https://repositories.lib.utexas.edu//bitstreams/b41459fa-1a05-4505-9d85-699423d7b2c4/download,,"Recent advances in a rapid freeform fabrication process for the production of aluminium
+"['Sercombe, T.B.', 'Schaffer, G.B.']",2020-02-12T15:06:37Z,2020-02-12T15:06:37Z,2004,Mechanical Engineering,,"['https://hdl.handle.net/2152/79934', 'http://dx.doi.org/10.26153/tsw/6960']",eng,2004 International Solid Freeform Fabrication Symposium,Open,Selective Laser Sintering,Advances in the Production of Infiltrated Aluminium Parts Using Selective Laser Sintering,Conference paper,https://repositories.lib.utexas.edu//bitstreams/b41459fa-1a05-4505-9d85-699423d7b2c4/download,,"Recent advances in a rapid freeform fabrication process for the production of aluminium
 parts are considered. The methodology involves the formation of an unconstrained, resin bonded
 aluminium powder part by Selective Laser Sintering, the burnout of the resin, the partial
 transformation of the aluminium into a rigid aluminium nitride skeleton by reaction with the
@@ -1387,7 +1387,7 @@ at different peak load of 250, 350, and 450 mN with holding time of 400 s. In ad
 microstructural quantitative analyses, using optical microscopy and scanning electron microscopy,
 were performed. Microstructural assessments and depth-sensing creep characterizations were then
 used to assess processing parameter/ microstructure/ creep properties relationships for this alloy.",,,,,,
-"['Espalin, David', 'Arcaute, Karina', 'Anchondo, Eric', 'Adame, Arturo', 'Medina, Francisco', 'Winker, Rob', 'Hoppe, Terry', 'Wicker, Ryan']",2021-09-29T22:38:08Z,2021-09-29T22:38:08Z,9/23/10,Mechanical Engineering,,"['https://hdl.handle.net/2152/88222', 'http://dx.doi.org/10.26153/tsw/15163']",eng,2010 International Solid Freeform Fabrication Symposium,Open,"['fused deposition model', 'additive manufacturing', 'bonding', 'bonding methods', 'thermoplastic material', 'FDM-manufactured parts', 'bonding strength']",Analysis of Bonding Methods for FDM-Manufactured Parts,Conference paper,https://repositories.lib.utexas.edu//bitstreams/0a483bbc-75f5-40b8-a1fb-0ec631bd9c3b/download,University of Texas at Austin,"The fused deposition modeling (FDM) additive manufacturing (AM) technology has been
+"['Espalin, David', 'Arcaute, Karina', 'Anchondo, Eric', 'Adame, Arturo', 'Medina, Francisco', 'Winker, Rob', 'Hoppe, Terry', 'Wicker, Ryan']",2021-09-29T22:38:08Z,2021-09-29T22:38:08Z,2010,Mechanical Engineering,,"['https://hdl.handle.net/2152/88222', 'http://dx.doi.org/10.26153/tsw/15163']",eng,2010 International Solid Freeform Fabrication Symposium,Open,"['fused deposition model', 'additive manufacturing', 'bonding', 'bonding methods', 'thermoplastic material', 'FDM-manufactured parts', 'bonding strength']",Analysis of Bonding Methods for FDM-Manufactured Parts,Conference paper,https://repositories.lib.utexas.edu//bitstreams/0a483bbc-75f5-40b8-a1fb-0ec631bd9c3b/download,University of Texas at Austin,"The fused deposition modeling (FDM) additive manufacturing (AM) technology has been
 valuable for producing a variety of concept models, functional prototypes, end-use parts and
 manufacturing tools using a range of durable thermoplastic materials. The largest individual
 component that can be produced in FDM depends on the dimensions of the build chamber for the
@@ -1415,7 +1415,7 @@ direction with respect to the overhang’s local surface directions will be stud
 designed to generate the path of the multi-axis AM for the unsupported components like roofs, bridges and
 protrusions. The effects of the build direction on the surface quality and deformation of the components are
 studied.",,,,,,
-"['Fathi, S.', 'Dickens, P. M.', 'Hague, R. J. M.', 'Khodabkhski, K.', 'Gilbert, M.']",2020-03-11T15:13:14Z,2020-03-11T15:13:14Z,9/10/08,Mechanical Engineering,,"['https://hdl.handle.net/2152/80248', 'http://dx.doi.org/10.26153/tsw/7267']",eng,2008 International Solid Freeform Fabrication Symposium,Open,"['solid free-form fabrication', 'Ink-jetting']",Analysis of Droplet Train/Moving Substrate Interactions in Ink-Jetting Processes,Conference paper,https://repositories.lib.utexas.edu//bitstreams/774a34be-0bbd-40b7-9429-0bce1c54b30a/download,,"Ink-jetting technology has been applied to several processes in solid free-form
+"['Fathi, S.', 'Dickens, P. M.', 'Hague, R. J. M.', 'Khodabkhski, K.', 'Gilbert, M.']",2020-03-11T15:13:14Z,2020-03-11T15:13:14Z,2008,Mechanical Engineering,,"['https://hdl.handle.net/2152/80248', 'http://dx.doi.org/10.26153/tsw/7267']",eng,2008 International Solid Freeform Fabrication Symposium,Open,"['solid free-form fabrication', 'Ink-jetting']",Analysis of Droplet Train/Moving Substrate Interactions in Ink-Jetting Processes,Conference paper,https://repositories.lib.utexas.edu//bitstreams/774a34be-0bbd-40b7-9429-0bce1c54b30a/download,,"Ink-jetting technology has been applied to several processes in solid free-form
 fabrication (SFF) wherein droplets impinge onto a substrate to deposit the build material.
 Droplet impact behaviour on a surface has been the interest of many researchers; however,
 few studies have been undertaken to investigate the interaction of droplets with the moving
@@ -1429,7 +1429,7 @@ microscope allows for the systematic study of fatigue crack evolution in aluminu
 The resulting data from experimentation, characterization, and analysis are integrated to gain
 unprecedented insights into the evolution of fatigue failure in wrought aluminum parts. The
 learning from this work will be further implemented on additively manufactured specimens.",,,,,,
-"['Gaytan, Sara M.', 'Cadena, Monica', 'Aldaz, Mayela', 'Herderick, Edward', 'Medina, Francisco', 'Wicker, Ryan']",2021-10-12T17:59:57Z,2021-10-12T17:59:57Z,8/16/13,Mechanical Engineering,,"['https://hdl.handle.net/2152/88708', 'http://dx.doi.org/10.26153/tsw/15642']",eng,2013 International Solid Freeform Fabrication Symposium,Open,"['ceramic fabrication', 'ferroelectric ceramics', 'binder jetting', 'dielectric capacitors', 'sensors', 'integrated circuits', 'M-Lab system', 'ExOne']",Analysis of Ferroelectric Ceramic Fabricated by Binder Jetting Technology,Conference paper,https://repositories.lib.utexas.edu//bitstreams/1329182a-eca5-470a-9bed-f0ab8c5ebb71/download,University of Texas at Austin,"The M-Lab system from ExOne was used to fabricate 3D structures of BaTiO3 ceramic
+"['Gaytan, Sara M.', 'Cadena, Monica', 'Aldaz, Mayela', 'Herderick, Edward', 'Medina, Francisco', 'Wicker, Ryan']",2021-10-12T17:59:57Z,2021-10-12T17:59:57Z,2013,Mechanical Engineering,,"['https://hdl.handle.net/2152/88708', 'http://dx.doi.org/10.26153/tsw/15642']",eng,2013 International Solid Freeform Fabrication Symposium,Open,"['ceramic fabrication', 'ferroelectric ceramics', 'binder jetting', 'dielectric capacitors', 'sensors', 'integrated circuits', 'M-Lab system', 'ExOne']",Analysis of Ferroelectric Ceramic Fabricated by Binder Jetting Technology,Conference paper,https://repositories.lib.utexas.edu//bitstreams/1329182a-eca5-470a-9bed-f0ab8c5ebb71/download,University of Texas at Austin,"The M-Lab system from ExOne was used to fabricate 3D structures of BaTiO3 ceramic
 with applications that include dielectric capacitors, sensors, and integrated circuits. For this
 project, layer thicknesses of 15 and 30 μm and various percentages of binder saturation were
 used to fabricate components from powder. An organic binding agent was utilized during the
@@ -1498,7 +1498,7 @@ sintered and require extra processing. This research analyzes several powder rem
 and compares their effectiveness. This work utilizes two types of samples, both made of Ti-6Al4V in EBPBF; with geometries that resemble typical features when designing a component. The
 target weight of each cylinder is calculated based on dimensions and effective density of the
 sample. The results summarizing the effectiveness of each method are presented.",,,,,,
-"['Mireles, Jorge', 'Adame, Arturo', 'Espalin, David', 'Medina, Francisco', 'Winker, Rob', 'Hoppe, Terry', 'Zinniel, Bob', 'Wicker, Ryan']",2021-10-04T21:16:01Z,2021-10-04T21:16:01Z,8/17/11,Mechanical Engineering,,"['https://hdl.handle.net/2152/88348', 'http://dx.doi.org/10.26153/tsw/15287']",eng,2011 International Solid Freeform Fabrication Symposium,Open,"['Additive Manufacturing', 'fluid pressure', 'Fused Deposition Modeling', 'sealant', 'end-use applications']",Analysis of Sealing Methods for FDM-fabricated Parts,Conference paper,https://repositories.lib.utexas.edu//bitstreams/90d5327d-5b37-431e-b5a6-4ca3ac8f19c2/download,University of Texas at Austin,"As a result of the layer-by-layer deposition characteristics of Additive Manufacturing
+"['Mireles, Jorge', 'Adame, Arturo', 'Espalin, David', 'Medina, Francisco', 'Winker, Rob', 'Hoppe, Terry', 'Zinniel, Bob', 'Wicker, Ryan']",2021-10-04T21:16:01Z,2021-10-04T21:16:01Z,2011,Mechanical Engineering,,"['https://hdl.handle.net/2152/88348', 'http://dx.doi.org/10.26153/tsw/15287']",eng,2011 International Solid Freeform Fabrication Symposium,Open,"['Additive Manufacturing', 'fluid pressure', 'Fused Deposition Modeling', 'sealant', 'end-use applications']",Analysis of Sealing Methods for FDM-fabricated Parts,Conference paper,https://repositories.lib.utexas.edu//bitstreams/90d5327d-5b37-431e-b5a6-4ca3ac8f19c2/download,University of Texas at Austin,"As a result of the layer-by-layer deposition characteristics of Additive Manufacturing
 (AM) processes, fabricated parts exhibit limiting qualities and have yet to achieve the
 requirements for end-use applications. Specifically, the use of AM-fabricated parts in fluid
 pressure applications is limited due to part porosity as well as non-optimized building variables
@@ -1588,7 +1588,7 @@ developed and applied to ZrCuAlNb- and CuTiZrNi-BMGs to predict melt pool dimens
 and cooling rates during PBF-LB/M. Therefore, temperature-dependent thermal properties are
 determined via laser flash measurements. The effective absorptivity of the two materials is
 measured, and single-line experiments were performed as a validation for the approach.",,,,,,
-"['Lindermann, C.', 'Jahnke, U.', 'Moi, M.', 'Koch, R.']",2021-10-05T18:39:19Z,2021-10-05T18:39:19Z,8/20/12,Mechanical Engineering,,"['https://hdl.handle.net/2152/88402', 'http://dx.doi.org/10.26153/tsw/15341']",eng,2012 International Solid Freeform Fabrication Symposium,Open,"['additive manufacturing', 'product lifecycle', 'activity based costing', 'cost drivers']",Analyzing Product Lifecycle Costs for a Better Understanding of Cost Drivers in Additive Manufacturing,Conference paper,https://repositories.lib.utexas.edu//bitstreams/1e98472c-0a13-4fed-8db5-c965d9192dd1/download,University of Texas at Austin,"The costs of additive manufactured parts often seem too high in comparison to those of
+"['Lindermann, C.', 'Jahnke, U.', 'Moi, M.', 'Koch, R.']",2021-10-05T18:39:19Z,2021-10-05T18:39:19Z,2012,Mechanical Engineering,,"['https://hdl.handle.net/2152/88402', 'http://dx.doi.org/10.26153/tsw/15341']",eng,2012 International Solid Freeform Fabrication Symposium,Open,"['additive manufacturing', 'product lifecycle', 'activity based costing', 'cost drivers']",Analyzing Product Lifecycle Costs for a Better Understanding of Cost Drivers in Additive Manufacturing,Conference paper,https://repositories.lib.utexas.edu//bitstreams/1e98472c-0a13-4fed-8db5-c965d9192dd1/download,University of Texas at Austin,"The costs of additive manufactured parts often seem too high in comparison to those of
 traditionally manufactured parts, as the information about major cost drivers, especially for
 additive manufactured metal parts, is weak. Therefore, a lifecycle analysis of additive
 manufactured parts is needed to understand and rate the cost drivers that act as the largest
@@ -1611,7 +1611,7 @@ sufficient material fusion, resulting in lack-of-fusion between melting tracks.
 remelting would not immediately disappear in subsequent layers following the overhang regions. Results
 shows three additional layers are required to fully recover the remelting condition back to normal. The
 remelting results from MPM are also visible within layerwise optical images of the same surface.",,,,,,
-"['de Smit, Bram', 'Broek, Han J.']",2020-02-17T14:42:54Z,2020-02-17T14:42:54Z,8/30/04,Mechanical Engineering,,"['https://hdl.handle.net/2152/79999', 'http://dx.doi.org/10.26153/tsw/7024']",eng,2004 International Solid Freeform Fabrication Symposium,Open,Extruded Polystyrene Foam,Analyzing the Cutting Process of a Heated Flexible Blade in Extruded Polystyrene Foam,Conference paper,https://repositories.lib.utexas.edu//bitstreams/9eeff267-8a09-4c50-9f58-f6b46bcc52b7/download,,"For the “Free Form Thick Layered Object Manufacturing” technology that is being
+"['de Smit, Bram', 'Broek, Han J.']",2020-02-17T14:42:54Z,2020-02-17T14:42:54Z,2004,Mechanical Engineering,,"['https://hdl.handle.net/2152/79999', 'http://dx.doi.org/10.26153/tsw/7024']",eng,2004 International Solid Freeform Fabrication Symposium,Open,Extruded Polystyrene Foam,Analyzing the Cutting Process of a Heated Flexible Blade in Extruded Polystyrene Foam,Conference paper,https://repositories.lib.utexas.edu//bitstreams/9eeff267-8a09-4c50-9f58-f6b46bcc52b7/download,,"For the “Free Form Thick Layered Object Manufacturing” technology that is being
 developed at the Delft University, it is vital that Extruded Polystyrene Foam (XPS) can be cut
 accurately with a heated blade. The shape of the blade is actively controlled during the cutting
 process, which results in double curved cutting surfaces. In order to make this cutting process
@@ -1799,7 +1799,7 @@ performance is quite promising, although still insufficient to allow complete au
 The SVM-based approach produces tolerable results when tested with materials not in the training data set. When
 control parameters produced by the learning algorithms are used as a starting point for manual calibration,
 significant operator time savings and material waste reduction may be achieved.",,,,,,
-"['Hasan, S.', 'Rennie, A.E.W.']",2021-09-23T22:45:10Z,2021-09-23T22:45:10Z,9/10/08,Mechanical Engineering,,"['https://hdl.handle.net/2152/88044', 'http://dx.doi.org/10.26153/tsw/14985']",eng,2008 International Solid Freeform Fabrication Symposium,Open,"['Rapid Manufacturing', 'spare parts industry', 'e-business']",The Application of Rapid Manufacturing Technologies in the Spare Parts Industry,Conference paper,https://repositories.lib.utexas.edu//bitstreams/08d8f05a-05c0-4aa6-910e-7fa8aeec1020/download,,,,text,,,,
+"['Hasan, S.', 'Rennie, A.E.W.']",2021-09-23T22:45:10Z,2021-09-23T22:45:10Z,2008,Mechanical Engineering,,"['https://hdl.handle.net/2152/88044', 'http://dx.doi.org/10.26153/tsw/14985']",eng,2008 International Solid Freeform Fabrication Symposium,Open,"['Rapid Manufacturing', 'spare parts industry', 'e-business']",The Application of Rapid Manufacturing Technologies in the Spare Parts Industry,Conference paper,https://repositories.lib.utexas.edu//bitstreams/08d8f05a-05c0-4aa6-910e-7fa8aeec1020/download,,,,text,,,,
 "['Bharadwaja, R.', 'Murugan, Aravind', 'Chen, Yitao', 'Liou, F W']",2021-11-18T18:26:50Z,2021-11-18T18:26:50Z,2019,Mechanical Engineering,,"['https://hdl.handle.net/2152/90457', 'http://dx.doi.org/10.26153/tsw/17378']",eng,2019 International Solid Freeform Fabrication Symposium,Open,"['schlieren', 'visualization', 'shielding gas', 'additive manufacturing']",Application of Schlieren Technique in Additive Manufacturing: A Review,Conference paper,https://repositories.lib.utexas.edu//bitstreams/c6765b25-515a-4723-8c53-66123153de35/download,University of Texas at Austin,"Additive manufacturing has gained a lot of attention in the past few decades due to its
 significant advantages in terms of design freedom, lower lead time, and ability to produce complex
 shapes. One of the pivotal factors affecting the process stability and hence the part quality is the
@@ -1894,7 +1894,7 @@ prosthesis is realised through high resolution, multi-material 3D printing for p
 reproduction and to add functionalities such as mimicry of soft and hard tissues. Ultimately,
 we believe our approach provides an optimised, low-cost approach for streamlining the
 complete methodology for prosthesis production.",,,,,,
-"['Liou, Frank', 'Slattery, Kevin', 'Kinsella, Mary', 'Newkirk, Joseph', 'Chou, Hsin-Nan', 'Landers, Robert']",2020-02-27T19:14:59Z,2020-02-27T19:14:59Z,2006,Mechanical Engineering,,"['https://hdl.handle.net/2152/80092', 'http://dx.doi.org/10.26153/tsw/7113']",eng,"['2006 International Solid Freeform Fabrication Symposium', '2006 International Solid Freeform Fabrication Symposium']",Open,Rapid Prototyping,Applications of a Hybrid Manufacturing Process for Fabrication and Repair of Metallic Structures,Conference paper,https://repositories.lib.utexas.edu//bitstreams/adef9ef7-1ac2-4e5b-926b-c9b17f714025/download,,"Since its appearance, rapid prototyping technology has been of interest to various industries that
+"['Liou, Frank', 'Slattery, Kevin', 'Kinsella, Mary', 'Newkirk, Joseph', 'Chou, Hsin-Nan', 'Landers, Robert']",2020-02-27T19:14:59Z,2020-02-27T19:14:59Z,2006,Mechanical Engineering,,"['https://hdl.handle.net/2152/80092', 'http://dx.doi.org/10.26153/tsw/7113']",eng,2006 International Solid Freeform Fabrication Symposium,Open,Rapid Prototyping,Applications of a Hybrid Manufacturing Process for Fabrication and Repair of Metallic Structures,Conference paper,https://repositories.lib.utexas.edu//bitstreams/adef9ef7-1ac2-4e5b-926b-c9b17f714025/download,,"Since its appearance, rapid prototyping technology has been of interest to various industries that
 are looking for a process to produce/build a part directly from a CAD model in a short time.
 Among them, the direct metal deposition process is the only process which directly manufactures
 a fully dense metal part without intermediate steps. However, challenges of the direct metal
@@ -1906,7 +1906,7 @@ potentially a very competitive process to fabricate and repair metallic structur
 summarizes the current development of the hybrid process to process high temperature metallic
 materials, including tool steel and Ti64. Research in simulation and modeling, process
 development, and actual part building and repair are discussed.",,,,,,
-"['Isanaka, Sriram Praneeth', 'Liou, Frank']",2021-10-05T19:23:30Z,2021-10-05T19:23:30Z,8/15/12,Mechanical Engineering,,"['https://hdl.handle.net/2152/88416', 'http://dx.doi.org/10.26153/tsw/15355']",eng,2012 International Solid Freeform Fabrication Symposium,Open,"['Cyber Enabled Manufacturing', 'additive manufacturing technology', 'cyber-physical systems']",The Applications of Additive Manufacturing Technologies in Cyber-Enabled Manufacturing Systems,Conference paper,https://repositories.lib.utexas.edu//bitstreams/0cc996d3-09c5-422f-b222-c811d46fe2dc/download,University of Texas at Austin,"The application of networked sensors and control in various areas, such as smart grids
+"['Isanaka, Sriram Praneeth', 'Liou, Frank']",2021-10-05T19:23:30Z,2021-10-05T19:23:30Z,2012,Mechanical Engineering,,"['https://hdl.handle.net/2152/88416', 'http://dx.doi.org/10.26153/tsw/15355']",eng,2012 International Solid Freeform Fabrication Symposium,Open,"['Cyber Enabled Manufacturing', 'additive manufacturing technology', 'cyber-physical systems']",The Applications of Additive Manufacturing Technologies in Cyber-Enabled Manufacturing Systems,Conference paper,https://repositories.lib.utexas.edu//bitstreams/0cc996d3-09c5-422f-b222-c811d46fe2dc/download,University of Texas at Austin,"The application of networked sensors and control in various areas, such as smart grids
 and infrastructures, has become a recent trend, called cyber-physical systems. The Cyber
 Enabled Manufacturing (CEM) environment is to apply these technologies in manufacturing
 systems to handle a significantly greater magnitude of manufacturing data. Additive
@@ -1961,7 +1961,7 @@ determine uniformity along principal axes and behavior under strain when compare
 patterns, such as grid and cubic. This work establishes that VTP as applied to TPU can be used to
 manufacture programmable stiffness foams as a function of density, suited to a variety of needs
 and should be considered as an alternative to traditional foams and other printed lattice geometries.",,,,,,
-"['Chiu, Y. Y.', 'Chang, J. H.']",2020-02-17T14:30:03Z,2020-02-17T14:30:03Z,8/4/04,Mechanical Engineering,,"['https://hdl.handle.net/2152/79998', 'http://dx.doi.org/10.26153/tsw/7023']",eng,2004 International Solid Freeform Fabrication Symposium,Open,rapid prototyping,The Approach of Complex Insert Packaging Fabrication in Stereolithography,Conference paper,https://repositories.lib.utexas.edu//bitstreams/d7975c96-ac7d-43e9-bba2-e52ad356cffd/download,,"The approach of complex insert packaging fabrication in stereolithography is studied in the
+"['Chiu, Y. Y.', 'Chang, J. H.']",2020-02-17T14:30:03Z,2020-02-17T14:30:03Z,2004,Mechanical Engineering,,"['https://hdl.handle.net/2152/79998', 'http://dx.doi.org/10.26153/tsw/7023']",eng,2004 International Solid Freeform Fabrication Symposium,Open,rapid prototyping,The Approach of Complex Insert Packaging Fabrication in Stereolithography,Conference paper,https://repositories.lib.utexas.edu//bitstreams/d7975c96-ac7d-43e9-bba2-e52ad356cffd/download,,"The approach of complex insert packaging fabrication in stereolithography is studied in the
 paper. There are many difficulties being overcome, such as the dispensing shadowing problem
 caused by the geometric shape of insert, the polymer feeding problem caused by greater insert
 height than the layer thickness, and the positioning problem of insert that leads to instability of
@@ -1983,7 +1983,7 @@ aluminum was investigated. Mechanical characteristics, e.g. elastic and flexural
 examined with respect to variation of manufacturing process parameters. In addition, a new
 methodology was tested, which should help determine the maximum filler packing volume fraction
 corresponding to the highest mechanical characteristics of a polymer-filler mixture.",,,,,,
-"['Rivette, M.', 'Mognol, P.', 'Hascoet, JY.']",2020-03-05T18:51:28Z,2020-03-05T18:51:28Z,9/14/06,Mechanical Engineering,,"['https://hdl.handle.net/2152/80142', 'http://dx.doi.org/10.26153/tsw/7163']",eng,2006 International Solid Freeform Fabrication Symposium,Open,Rapid Prototyping,Approach Tolerance in the Assemblies of Evolutionary Hybrid Prototypes,Conference paper,https://repositories.lib.utexas.edu//bitstreams/7662fd9c-f37f-475c-b6e6-4a6f6da644ae/download,,"A new answer is proposed to replace the traditional “one shot” prototype (manufactured in
+"['Rivette, M.', 'Mognol, P.', 'Hascoet, JY.']",2020-03-05T18:51:28Z,2020-03-05T18:51:28Z,2006,Mechanical Engineering,,"['https://hdl.handle.net/2152/80142', 'http://dx.doi.org/10.26153/tsw/7163']",eng,2006 International Solid Freeform Fabrication Symposium,Open,Rapid Prototyping,Approach Tolerance in the Assemblies of Evolutionary Hybrid Prototypes,Conference paper,https://repositories.lib.utexas.edu//bitstreams/7662fd9c-f37f-475c-b6e6-4a6f6da644ae/download,,"A new answer is proposed to replace the traditional “one shot” prototype (manufactured in
 one piece with one process): the hybrid rapid prototype. It is used to highly reduce time,
 cost and increase reactivity during the development times of new products.
 The part is decomposed in several components which can quickly be changed and can be
@@ -21911,7 +21911,7 @@ resins develoPed by Ciba-Geigy were calibrated and compared with the most common
 Araldite B (manufactured by Ciba-Geigy, too). The experience shows that static and dynamic
 photoelastic investigations by using the new STL-resins are possible. The time saving for photoelastic
 investigations amountsto values about 10 months and the cost saving is equivalent to 90010.",,,,,,
-"['Kim, Young Hyun', 'Lim, Jong Seon', 'Lee, In Hwan', 'Kim, Ho-Chan']",2021-09-29T17:08:09Z,2021-09-29T17:08:09Z,9/15/09,Mechanical Engineering,,"['https://hdl.handle.net/2152/88190', 'http://dx.doi.org/10.26153/tsw/15131']",eng,2009 International Solid Freeform Fabrication Symposium,Open,"['photopolymer solidification', 'stereolithography process', 'laser exposure conditions']",Photopolymer Solidification for Inclined Laser Exposure Conditions,Conference paper,https://repositories.lib.utexas.edu//bitstreams/768b557a-5ded-4a09-aded-aff72b5fdc38/download,University of Texas at Austin,"It has been reported that the photopolymer solidification in the stereolithogrpahy process is
+"['Kim, Young Hyun', 'Lim, Jong Seon', 'Lee, In Hwan', 'Kim, Ho-Chan']",2021-09-29T17:08:09Z,2021-09-29T17:08:09Z,2009,Mechanical Engineering,,"['https://hdl.handle.net/2152/88190', 'http://dx.doi.org/10.26153/tsw/15131']",eng,2009 International Solid Freeform Fabrication Symposium,Open,"['photopolymer solidification', 'stereolithography process', 'laser exposure conditions']",Photopolymer Solidification for Inclined Laser Exposure Conditions,Conference paper,https://repositories.lib.utexas.edu//bitstreams/768b557a-5ded-4a09-aded-aff72b5fdc38/download,University of Texas at Austin,"It has been reported that the photopolymer solidification in the stereolithogrpahy process is
 mainly depended on the laser exposure conditions such as laser power and scanning speed.
 However, they were focused on the vertical laser exposure conditions. In this research, we
 developed a mathematical model for the photopolymer solidification under the inclined laser
@@ -22110,7 +22110,7 @@ compared with polyamide 11 and 12 baseline polymers. Based on flammability and
 mechanical material performance, selective polymers including polyamide 11
 nanocomposites and control polyamide 11 were cryogenically ground into fine powders
 and fabricated into SLS parts.",,,,,,
-"['McMorrow, Brain', 'Chartoff, Richard', 'Lucas, Pierre', 'Richardson, Wade']",2020-02-20T21:07:06Z,2020-02-20T21:07:06Z,8/3/05,Mechanical Engineering,,https://hdl.handle.net/2152/80055,eng,2005 International Solid Freeform Fabrication Symposium,Open,Solid Freeform Fabrication,Polymer Matrix Nanocomposites by Inkjet Printing,Conference paper,https://repositories.lib.utexas.edu//bitstreams/263bc2e5-d492-4c9d-8fcc-25e9f0f719c0/download,,"This paper describes work on a continuing project to form functional composites that contain
+"['McMorrow, Brain', 'Chartoff, Richard', 'Lucas, Pierre', 'Richardson, Wade']",2020-02-20T21:07:06Z,2020-02-20T21:07:06Z,2005,Mechanical Engineering,,https://hdl.handle.net/2152/80055,eng,2005 International Solid Freeform Fabrication Symposium,Open,Solid Freeform Fabrication,Polymer Matrix Nanocomposites by Inkjet Printing,Conference paper,https://repositories.lib.utexas.edu//bitstreams/263bc2e5-d492-4c9d-8fcc-25e9f0f719c0/download,,"This paper describes work on a continuing project to form functional composites that contain
 ceramic nanoparticles using a Solid Freeform Fabrication (SFF) inkjet printing method. The process
 involves inkjet deposition of monomer/particle suspensions in layers followed by curing each layer in
 sequence using UV radiation. The reactive monomer is hexanediol-diacrylate (HDODA); the polymer
@@ -31277,6 +31277,4 @@ calculating intersections between incident rays of light and triangles of the or
 mesh. Initial simulated results show a more consistent light dose at the surface of the object,
 indicating improved surface quality and smoothness. Additionally, simulations show a more
 uniform object interior using the proposed method as well as the potential for improved speed
-scaling with object size.",,,,,,
-,,,,,,,,,,,,,,,,,,,,,
-,,,,,,,,,,,,,,,,,,,,,
+scaling with object size.",,,,,,