diff --git "a/dev/Industrial_and_Scientific_5.txt" "b/dev/Industrial_and_Scientific_5.txt"
new file mode 100644--- /dev/null
+++ "b/dev/Industrial_and_Scientific_5.txt"
@@ -0,0 +1,1575 @@
+
+
+4949	Industrial_and_Scientific_5	POS	5.0	Good fitting
+51	Industrial_and_Scientific_5	POS	4.0	be ready expands alot
+Okay, that was a lie.
+4765	Industrial_and_Scientific_5	POS	5.0	Perfect
+
+It doesn't say that it's food grade on it, and it probably isn't but it spends such a short time in this tube, I'm not concerned. I clean it immediately and keep it in a dry place. Only used it four times so far, and no issues.
+The Panel Handle shares a similar problem with the Gorilla: namely, stairs. However, with the Gorilla, I can shift my grab point forward a foot to cause the ply panel to hang down at the back, raising up the front corner and preventing me banging into the nose of the stair tread. With this Panel Handle, I don't have the similar flexibility, since the drywall isn't being "gripped" quite the same way -- it just takes a little more thought and finesse to climb to the next floor.
+6277	Industrial_and_Scientific_5	POS	4.0	I love this tool. But yesterday I encountered something I want to share with other potential buyers. I was under my house to check a faulty circuit and it was really humid: probably 100% relative humidity. Anyway, I turned on my Fluke and started moving it from wire to wire to make sure it was working. Nothing. No beep, no constant light. So what's wrong? When I got back out and went into the garage I tested it on an exposed wire running into an outlet box. Sure enough, it beeped and the light came on. So what gives? Well, I did a little research, and the specs indicate it only works up to 95% relative humidity. Who would have guessed. Anyway, this is a minor drawback to me and I'd rate it 4.75 if I could.
+4057	Industrial_and_Scientific_5	POS	5.0	Think I can use these for starting campfires while camping in remote areas of Alaska.  (Of course, I'm being safe and only using these during the sub-zero temps of winter here.)
+6968	Industrial_and_Scientific_5	POS	4.0	Fit my brewing needs for the large siphon.
+2245	Industrial_and_Scientific_5	POS	4.0	This stuff holds just about everything.  Wood, metal, concrete to wood, plastic, fabrics, tennis shoes soles, copper pipe, drink coaster , ceramic, lampshades, mailboxes, drywall, rubber hoses you need it
+5110	Industrial_and_Scientific_5	POS	5.0	Good quality....NOT a piece of junk.  Good price.
+5825	Industrial_and_Scientific_5	POS	5.0	Works great. Best duct tape I ever used
+132	Industrial_and_Scientific_5	POS	5.0	PERFECT!
+for the safety aspect I will never recommend this product -- otherwise they used good material I have to say.
+6111	Industrial_and_Scientific_5	POS	5.0	Not much to say.  It's a cable / coax hanger.  Thy seem like they should last a few years before the fastener rusts and the plastic cracks.  I'll see how the handle the cold next winter and update my review accordingly
+4353	Industrial_and_Scientific_5	NEG	2.0	Very thin with minimal adhesive strength. Will not be reordering. Very low quality to the point of being nearly useless.
+9384	Industrial_and_Scientific_5	POS	5.0	does the job well.  no chatter and easy to install and remove with a punch.
+5064	Industrial_and_Scientific_5	POS	5.0	I love that I can buy a pipe fitting of all things on Amazon! This was just what I needed and I didn't have to go looking in a specialty store. Well made and at a good price. Not much else to say.
+3496	Industrial_and_Scientific_5	POS	5.0	Encantado
+4810	Industrial_and_Scientific_5	POS	5.0	good screws,too expensive tho
+Recommended for taping almost anything!
+1233	Industrial_and_Scientific_5	POS	5.0	The only problem was I need a lot more than I thought.  So look for the bigger box for cheaper.
+5381	Industrial_and_Scientific_5	POS	5.0	Good Deal!!
+Camco is a company with a proven history of quality merchandise.  This is another of those products.
+3418	Industrial_and_Scientific_5	POS	5.0	Excellent heavy duty trash can with nice extras.
+2274	Industrial_and_Scientific_5	POS	5.0	This is some easy to use product worthy of the name gorilla glue
+3061	Industrial_and_Scientific_5	POS	5.0	what can i say? A screw does what a screw does,,,,
+
+2.  The wrench they send with it is useless, use your own and save your knuckles.
+9239	Industrial_and_Scientific_5	POS	5.0	i worked in intensive care for eight years, we used all kinds of patches
+874	Industrial_and_Scientific_5	POS	5.0	I installed these on a small Emerson 4.4 cu.ft. refrigerator in my shop. The refrigerator is located inside a vented cabinet to protect it from grinding dust, etc.  I occasionally pull it from the cabinet to clean behind it.  These casters have made this task much easier.  The wheels installed without a problem at the rear of the refrigerator by drilling two holes and using an additional nut.  Replacing the adjustable feet in the front of the refrigerator was a little more difficult.  I had to drill and tap the existing threads for one of the front casters.  For the other front caster, I tack welded a 5/16" nut to the refrigerator.  Works awesome.
+7575	Industrial_and_Scientific_5	POS	5.0	Once I got this together it worked fine.  My us for this is just as a pole to hang my grow lights off of.  I couldn't think of anything else without buying an expensive grow light.  Use two of these Poles and a pole hung between I have an available system to hang any kind of grow light I want and point them in multiple directions. I can roll them around and turn it in any direction.  Extremely flexible for my use.
+* Surface needs to be damp for the glue to work
+123	Industrial_and_Scientific_5	POS	5.0	Works great
+2403	Industrial_and_Scientific_5	POS	5.0	If you're Mormon I think these should be available for every Elders Quorum move. Only issue I have is folks want to borrow these.  I was skeptical but now I find all sorts of uses lifting things up.
+
+Also making the whole unit water proof would help a lot just in case it slipped out of hand and fell.
+9331	Industrial_and_Scientific_5	POS	4.0	This is a good set, it has already come in handy while I was fixing some things.
+25	Industrial_and_Scientific_5	POS	5.0	I have been using this all week with a sanding project I am doing with garden furniture... they work great... stick amazing.. and last a long time... Great product
+3084	Industrial_and_Scientific_5	POS	5.0	This is a must-have for hydroponics. Sturdy, well built meter that does what it is supposed to do. Highly recommended.
+
+1880	Industrial_and_Scientific_5	POS	4.0	Straps work great, good quality.
+
+
+My fired cases also clean up better and faster.
+9730	Industrial_and_Scientific_5	POS	5.0	well this super glue works great so far
+7163	Industrial_and_Scientific_5	POS	5.0	as described
+We received many compliments while riding this trike. Little boys and girls point to it and ask their parents for the same thing. It is a cool little trike!
+
+1797	Industrial_and_Scientific_5	POS	5.0	good
+Iwin Unibit #1:
+1145	Industrial_and_Scientific_5	POS	4.0	As advertised.
+1815	Industrial_and_Scientific_5	POS	5.0	Won't buy anything more from Amazon until they stop supporting Breitbart's racist hate mongering.
+2637	Industrial_and_Scientific_5	POS	5.0	A great cart for general use. Easily goes from hand truck to cart and back.
+8620	Industrial_and_Scientific_5	POS	5.0	very nice
+9039	Industrial_and_Scientific_5	POS	5.0	Good quality.
+6773	Industrial_and_Scientific_5	POS	5.0	thanks
+
+The shutter assembly is understandably very thin and light weight. Unless you mount it to an absolutely flat surface, the slightest racking of the aluminum frame will prevent the shutters from opening or closing.
+8716	Industrial_and_Scientific_5	POS	5.0	Works great...Simple to operate DAN
+If you've used these before, there are no surprises.
+2740	Industrial_and_Scientific_5	POS	5.0	Good product and service
+37	Industrial_and_Scientific_5	POS	5.0	gor
+5400	Industrial_and_Scientific_5	POS	5.0	Dimensions and finish are as expected (good). Performance after installation is expected to be good also. The ID label on the fitting seems a bit confusing, but the fitting is the correct size which I ordered.
+2717	Industrial_and_Scientific_5	POS	5.0	The best upgrade possible!
+
+6919	Industrial_and_Scientific_5	POS	5.0	solid, does the job. wish that they had not started making their files in mexico. the file quality just means im probably brushing out more file with this.
+6481	Industrial_and_Scientific_5	POS	4.0	These calipers work great and are a great price.  I was plesently suprised when I saw they came in a molded case to hold them.  The only thing that I find wrong with them is that the thumb wheel is a little uncomfortable and can really dig into your skin if you use it for any amount of time.
+585	Industrial_and_Scientific_5	POS	5.0	Everybody needs electrical tape around, can't go wrong with 3m 88.  Best quality tape there is.
+5325	Industrial_and_Scientific_5	POS	5.0	OK
+I was able to use this to make my skid shoes, even with buying some of the other needed items from Rural King, and make two complete sets of skid shoes for $28.00 per set. Compare that to sets being sold on EBay for $180.00 and you are money ahead.
+9801	Industrial_and_Scientific_5	POS	5.0	This is the perfect companion to my table saw, router and band saw. I mounted it to a 12" square piece of 1.5" plywood and move it around the shop as needed. Much better plan than looking for that switch under the table saw while your supporting a big sheet of MDF.
+7273	Industrial_and_Scientific_5	POS	5.0	Looks good.  No scratches or damages.
+I purchased a sphygmomanometer & stethoscope in 1975 that I used successfully until it fell apart last month. This was supposed to be it's replacement.  This product is fine for a physician use but too difficult for use on one's self.
+7311	Industrial_and_Scientific_5	POS	5.0	This has a strong odor, but works great for those areas where electrical tape just won't fit or work right.  It also makes for a pretty tight water seal when used with additional electrical protection.
+5193	Industrial_and_Scientific_5	POS	5.0	This here gas can is top shelf quality schtuff as far as gas cans are concerned. This can with it's goose neck spout is extremely easy to use and fits my extra large hands very comfortably. This can is kinda pricey when compared to a twenty dollar poly can, but this gas can should last over 20 years. Most poly cans I've had in the past only lasted 2-3 years before they developed a leak. This product is a real manly-man kinda gas can.
+305	Industrial_and_Scientific_5	POS	4.0	Quality metal grinding wheel.  Makes short work of rusted or corroded fasteners.  I repair equipment that usually suffers from moisture damage and this wheel eats right through the rust.
+2033	Industrial_and_Scientific_5	POS	5.0	test leads good replacements for the worn out test lesds.
+Made in Germany, sold in North America through Safe Living Technologies, Gigahertz Solutions has a wide variety of accurate affordable models that cover many frequency ranges priced from under two hundred to over a thousand dollars. Here are some of them, all these listed have HIGH ACCURACY and measure both AC MAGNETIC and AC ELECTRIC fields:
+188	Industrial_and_Scientific_5	POS	4.0	just a stock brush..........good price
+1901	Industrial_and_Scientific_5	POS	5.0	Good product to keep on hand.
+2828	Industrial_and_Scientific_5	POS	4.0	Well nuff said, this is a good quality product and you get what you pay for! It's worth it to know you used the very best on your PC or laptop!
+
+8934	Industrial_and_Scientific_5	POS	5.0	Best price and quick shipping. Good quality.
+
+I won't comment on the makeup of the alloy here. I don't know if it is recommended for potable water use or not. Since that wasn't my application, I was not concerned with the specific alloy in use.
+
+2622	Industrial_and_Scientific_5	POS	5.0	This is a very nice bulk head fitting, It uses I believe a 1 3/4 hole saw.
+1726	Industrial_and_Scientific_5	POS	5.0	I WISH I COULD HAVE FOUND THESE PRODUCTS SOONER.
+3428	Industrial_and_Scientific_5	POS	5.0	All the plastic barrels these days are getting paper thin and worthless it seems. Well not these! Brute hasn't cheeped out on materials and is still making a quality barrel. They are more expensive but 100% worth it! I have bought a bunch of these in a variety of colors for my landscaping business and abuse them pretty hard sometimes. Try filling the other barrels with mulch and carrying them around, you'll rip the handles right off..
+1253	Industrial_and_Scientific_5	POS	5.0	Worthwhile investment if your doing remodel etc.
+241	Industrial_and_Scientific_5	POS	4.0	good
+However, here are some short-cut estimations for less demanding needs that some use:
+9719	Industrial_and_Scientific_5	POS	5.0	Very fast delivery service and a nice money savings over local retail prices. What I like in addition is the fact that each tube is for a one time application without a large amount when once opened,hardens and has to be thrown away
+- Lasts decades outdoors
+9022	Industrial_and_Scientific_5	POS	5.0	You can't beat these brads.
+3928	Industrial_and_Scientific_5	POS	4.0	Item as described, Fast shipping, Thank you
+pros: well built, great bearing protection
+Note:  I would not in any recommend using this for holes larger
+958	Industrial_and_Scientific_5	POS	4.0	Worked well with my impact driver.
+
+6562	Industrial_and_Scientific_5	POS	5.0	This is my third cheap digital caliper.  They typically draw about 20 microamps, on or off, and would probably drain an LR-44 battery below the required voltage in about 7 months.  The Neiko is the first caliper I've had where the battery is easy to remove.
+3047	Industrial_and_Scientific_5	POS	5.0	Started using quite a bit of 3/4" Hardwood Plywood (Birch mostly).  Plan to get in to more cabinet making and needed a box that would last me longer than week :)  Not sure this review will help anyone, since if you are seeking this Kreg screw, you already know what its for!  Plan to get the 5,000+ box next.  Going through 500 quicker than I had anticipated!
+137	Industrial_and_Scientific_5	POS	5.0	EXCELLENT
+3644	Industrial_and_Scientific_5	POS	5.0	Bought two of these for hooking up an outdoor sink. If you're doing this note that you will also need to get two adapters to go from these hoses to your sink, the one for hooking up a garbage disposal work fine with these.
+That Said -  I'm going to attempt Fixing my leaking Fuel Rail with this product before shelling out several $100 to a mechanic.
+6" 22mG
+1620	Industrial_and_Scientific_5	POS	5.0	worked great
+3859	Industrial_and_Scientific_5	POS	5.0	works real good
+1606	Industrial_and_Scientific_5	NEG	1.0	I have been using caulk for a long, long time and I can honestly say this was the worst experience I have ever had.  It was used to seal a window.  First off, minimum set up time is 7-14 days, (despite DAP online instructions stating it sets within hours) ridiculous.  After that, it is supposed to remain somewhat flexible like silicone, it does not.  It is gummy and easily punctured with indents appearing randomly even after your smooth bead has begun to dry weeks later.  Second, it shrinks more than any other caulk I have used.  Supposedly the clear shrinks more than the other colors, but I would never use it again anyway so I don't know.  What I do know is that it sets into a thin, and I mean ultra thin layer that is very difficult to get scrape off, which you will most likely do once you see how much it shrinks.  I even set up a dehumidifier to help the curing since it was used for a basement window.  (Two of the uses written DIRECTLY on the tube). The instructions on DAP's site are incorrect about set up time, and I have read of people getting refunds due to this.  That still doesn't pay me for my time of having to remove this junk and start over with another caulk.
+In any event, this glue is like all urethane glues. It requires a certain amount of moisture or humidity in and around the joint for the glue to set properly. This is a difficult concept for some folks to understand. This glue will not perform as intended if the materials are very dry and the humidity in the air is low. It NEEDS some amount of moisture in some manner for the glue to function as designed and to reach maximum strength. When I use this product I always moisten the surface of the wood slightly. I use a small sponge that is wrung out almost dry and then rub it firmly across the wood of the joint enough so that the moisture is evident. The wood will turn slightly darker as it absorbs moisture. Wait for about five minutes and then do it again. You want the wood to be very slightly damp only...NOT wet or dripping water. The glue will take care of the rest..!!!  Another thing to remember is that the glue does expand... It will push out of the joint. Watch for the glue and the bubbly look and clean it off as you wait for it to set. Keep a dry cloth handy and one dampened with paint thinner or a similar solvent. Once the glue sets completely and dries, you will meet a file or a chisel to remove it.....
+6075	Industrial_and_Scientific_5	POS	5.0	Just fine!!!
+
+1866	Industrial_and_Scientific_5	POS	5.0	I really like these screws for several reasons other than pocket screws. They start easy, square drive works well for me using the Kreg driver, they aren't bad to split my material and they hold well. I have not had the problems others have had stripping out or breaking the head off maybe because I usually predrill and I don't typically use them in hardwoods either. The only con is that they are more costly yet I am willing to continue if/when something better comes along. I use these in 3/4" material.
+
+3646	Industrial_and_Scientific_5	POS	5.0	I use this 75 foot water hose on my dock, to filly boat's water tank and to wash the boat.  It looks good, works well, and is relatively inexpensive.
+
+3-star:  helpful but doesn't accommodate all needs that one would expect
+9490	Industrial_and_Scientific_5	POS	5.0	Excellent transaction, quick, complete and exactly as described.  
+1408	Industrial_and_Scientific_5	POS	5.0	I buy no other tape for packaging.  I also find many other uses around the house for this.  It's very strong tape.  Not like the flimsy dollar store/discount store tape that tends to stick to itself after you cut a piece, and then you can never find the end of the tape again after you do cut a piece.  This is the only packing tape to buy!
+
+That is all i can think of to say at the moment..
+4014	Industrial_and_Scientific_5	POS	5.0	Good product, just as advertised.  A plus
+3.  Features (metric/imperial)
+Overall a nice product, well worth the money apparently, but cleaning out the applicator tube is not easy.
+4581	Industrial_and_Scientific_5	POS	5.0	great
+
+Goop is one of those "miracle" products with a thousands uses, which needs to be a permanent part of any household.  Other such items include silicon grease&nbsp;<a data-hook="product-link-linked" class="a-link-normal" href="/Permatex-22058-Dielectric-Tune-up-Grease-3-oz/dp/B000AL8VD2/ref=cm_cr_arp_d_rvw_txt?ie=UTF8">Permatex 22058 Dielectric Tune-up Grease - 3 oz.</a>&nbsp;painter's tape&nbsp;<a data-hook="product-link-linked" class="a-link-normal" href="/ScotchBlue-Painter-s-Tape-2090-1E2-1-Inch-by-60-Yards-1-Roll/dp/B00004Z4CP/ref=cm_cr_arp_d_rvw_txt?ie=UTF8">ScotchBlue Painter's Tape 2090-1E2, 1 Inch by 60 Yards, 1 Roll</a>, and WD-40.&nbsp;<a data-hook="product-link-linked" class="a-link-normal" href="/WD-40-Spray-Lubricant-16-oz/dp/B002WYBVYQ/ref=cm_cr_arp_d_rvw_txt?ie=UTF8">WD-40 Spray Lubricant - 16-oz.</a>
+the stated hole size of 11/16" was also spot-on. these grommets popped into place and fit very well, and they don't "roll" in or out of the hole when adjusting the beer line. i'm sure you could probably pick them up in a store for less than the add-on price on amazon, but you can't beat the convenience of free 2-day shipping for items like this. great buy!
+super fast delivery
+
+2072	Industrial_and_Scientific_5	POS	5.0	I was looking for a second caliper for woodworking to complement my Starrett caliper - and this fit the bill well.  I use the Starrett caliper in my shop for precision measurements when dimensioning wood for projects, or for measuring parts for assembly, or other shop tasks.  The problem was, I needed something to use outside in my carport where I store my wood, and where I do rougher cutting tasks.  I did not want to bring my 100$ Starrett outside for these "rougher" measuring tasks, plus you know how it is - once you bring the caliper to another location, you forget to bring it back in making it very inconvenient when you need it in the shop.  Plus, outside there was more of a chance of dropping the caliper, and the Starrett at $100+ was not the right tool.
+1076	Industrial_and_Scientific_5	POS	5.0	Great quality, Works great!!  Reasonably priced.  All Arrow product work as advertised.  I have several of them. Would definately buy Arrow products again.
+6805	Industrial_and_Scientific_5	POS	4.0	Well just another item added to the emergency medical prepping kit. I checked out a few of them and read a lot of literature. Ended up with this item. When I received it... tested it and it worked great... especially for a beginner.
+1456	Industrial_and_Scientific_5	POS	5.0	For absolute precision, Starrett is a must! I have total faith in my dial indicator.
+8839	Industrial_and_Scientific_5	POS	5.0	I used this for the door on a jewelry cabinet.  Easy to cut on a table saw with a fine tooth blade.
+9032	Industrial_and_Scientific_5	POS	5.0	This is a fantastic hammer with good weight and a great feel both for me and the patient.  I love the brush.  Only wish it had a pin for pinprick testing.  The point at the end is fine for Babinski but not good for pinprick.  But that's a small price to pay.  This is the best reflex hammer I have ever owned, hands down.
+9747	Industrial_and_Scientific_5	POS	5.0	Great deal!
+4392	Industrial_and_Scientific_5	POS	5.0	Great product
+4211	Industrial_and_Scientific_5	POS	5.0	I use these to mix my two part epoxy in and when I'm through throw it away. 100 units at 3 cents each come on that's like stealing
+
+4676	Industrial_and_Scientific_5	POS	5.0	Toggles like these are so much easier and stronger than the "anchors" that punch-in or screw-into the drywall or other mounting surface. Those end up chipping away/eating the material and still don't hold even HALF as strong as these toggles. One tip though. When you're pre-screwing the screw through the toggle just before you insert it into the wall (as shown in Amazon's picture), ensure you've screwed it completely through the toggle and it's little wire springs (again, as shown in Amazon's picture). If you don't screw it in past those little springs, the anchor can sometimes get caught up and twisted once inside the wall. At this time, it refuses to deploy properly, tighten up properly or really even unscrew properly so you can fix it. Years ago before I learned this, I cursed at these toggles several times. But once I realized you have to screw the screw completely through the toggle before folding it down and shoving it through the wall, life has been perfect. If you've got the money, the zip version of these is even nicer. Search the term "Zip Toggle". VERY VERY easy to use, but spendy.
+3916	Industrial_and_Scientific_5	POS	5.0	Works well, very strong
+3684	Industrial_and_Scientific_5	POS	5.0	Half the price of the RV stores and great quality!
+9100	Industrial_and_Scientific_5	POS	5.0	It's WD-40.  Do I need to say more?  It works to protect and free metal parts.  I use it on hinges and other uses throughout the home.  I wouldn't go without it.
+688	Industrial_and_Scientific_5	POS	5.0	Super- 33+ has got to be the very best. I've been using it for decades and it's always been great.
+7968	Industrial_and_Scientific_5	POS	5.0	great value
+
+1276	Industrial_and_Scientific_5	POS	5.0	I own several home carpet/rug cleaners and before that, I'd rented a Rug Doctor on occasion. This unit by Hoover is designated "commercial" and based on my experience with other cleaners, I feel it really is close to commercial quality.
+4930	Industrial_and_Scientific_5	POS	4.0	Brass fitting, it is the size ordered.
+2842	Industrial_and_Scientific_5	POS	5.0	Great product great service
+286	Industrial_and_Scientific_5	POS	5.0	Worked great
+1525	Industrial_and_Scientific_5	POS	5.0	It's exactly the same green tube of acetone-based sticky stuff you'd get in the store.
+
+Got some knockoff stuff on a business trip in Manila to compare, and it smelled so strongly of fish, I couldn't stand having on the tool shelf. This is the real stuff you want, not.. Blended tuna in a syring? I don't know? It was pungent.
+
+3811	Industrial_and_Scientific_5	POS	5.0	Works great and sets up in 6 mins
+
+5378	Industrial_and_Scientific_5	POS	5.0	Very good product
+2722	Industrial_and_Scientific_5	POS	5.0	This items is so outstanding that I don't know where to start the quality the everything about it is just so amazing
+
+It also doesn't split or come apart on the end, so that you have a nice straight end piece every time you go to cut the tape.  It also stays in place on the mounting area (I have no idea what it's called!) so that it easily feeds into the cutter.
+6122	Industrial_and_Scientific_5	NEG	1.0	Clearly marketed as "1/4" pegboard pegs. These are not they are 1/8 and will fit with slop in a heavy dirty 1/4 pegboard. See attached pics, peg on right in both pics is a real 1/4in peg. Peg on left is what was sold here from this seller.
+6085	Industrial_and_Scientific_5	NEG	1.0	We bought this to use for home brewing, cider, mead, etc., but every time I measure any batch, of any liquid that should have an alcohol content it reads .99.  Mead, .99, cider .99, 40 proof rum .99.  I would look for another brand, I don't trust the thing~  It is packed well, I got a hydrometer tube to do accurate readings, I've waited 2 months and the batches never change, then I tried it with a known item, store bought rum with a tested and listed alcohol content, measured the same as everything else.  Disappointed
+8312	Industrial_and_Scientific_5	POS	5.0	High-quality material highly recommend.
+3617	Industrial_and_Scientific_5	POS	4.0	This packing tape is quiet, not making loud noises, it thick and sticks well and is easy to use: it's a good size, not for serious packaging, but for a handy size to keep in the car or a toolbox, or just to have a bit of good tape around.  It's clear, smooth and neat to use, seals packages nicely: I would highly recommend this tape!
+103	Industrial_and_Scientific_5	POS	5.0	Fast ship great product Thanks
+4772	Industrial_and_Scientific_5	POS	5.0	good screws that do a great job
+8186	Industrial_and_Scientific_5	POS	5.0	As advertised.
+8584	Industrial_and_Scientific_5	POS	5.0	Great brand and product. Multiple purchases.
+7815	Industrial_and_Scientific_5	POS	5.0	This was just incredible.  I use it to hang a windsock in the back yard.  Does great.
+8511	Industrial_and_Scientific_5	POS	5.0	as advertised
+1336	Industrial_and_Scientific_5	POS	5.0	This is great for taking trash out. You can take two trash cans out at the same time. Just place cans on top. They stay in place. Easy to push around. This is very sturdy as well.. Great for home or business.
+
+7876	Industrial_and_Scientific_5	POS	4.0	excellent product, thank you very much
+4098	Industrial_and_Scientific_5	POS	5.0	Great for cleaning the "naughty bits" during a shower.
+
+2480	Industrial_and_Scientific_5	POS	5.0	I bought this jack to lift up sections of a large deck that were sagging.  I was able to quickly jack up and re-level my deck.  This jack works great for heavy duty lifting.  I also used it to jack up my car for repair work in conjunction with my car jack.  The jack is sturdy and I have had no issues with it so far.
+921	Industrial_and_Scientific_5	POS	4.0	Wasn't quite as tight a fit in 1" ID tubing as I'd hoped for.  But I deformed the tubes a little before driving them in.  They've stayed in.
+5642	Industrial_and_Scientific_5	POS	5.0	Works
+1119	Industrial_and_Scientific_5	POS	5.0	great product, arrived on time and good price.
+4303	Industrial_and_Scientific_5	POS	5.0	We park 2 large cars in a garage that is packed with yard stuff.  This helps us make sure we don't hit anything in the front or the right side of the car parked on the right, where there is a fireplace chimney sticking out into the garage.  Easy to install.  But I had to fiddle with the mounting to make sure the mirror was positioned in the best place.
+1869	Industrial_and_Scientific_5	POS	5.0	Works great with my Kreg Jig kit. I have a full assortment of Kreg Screws for all material types and thickness. Holds tight and easy to install with a square drive.  Ideal for hardwoods.
+After a couple of months everything appears to be where it started out.
+2 1/2" Angled Pegboard Hook (count of 5)
+6193	Industrial_and_Scientific_5	POS	5.0	Asked the question from others and did not receive a response. Took a chance and found my own answer. For those that would want to know, yes both pieces do interlock including the insulator. One insulator fits over the other and gives an additional layer of insulation from shorting out if used on positive side of electricity. There not completely protected from weather, just like most terminal connectors.
+
+8889	Industrial_and_Scientific_5	POS	5.0	I searched and searched for HDPE and/or Teflon.  Since HDPE is much cheaper, and has a very low friction coefficient, I choose this product.  This is the best price I have found out there, even beat my local plastics supplier.  I purchased this produce to line the inside of a project I'm working on where I need to very easily side an acrylic tray in and out.  This product did the trick, I'm very pleased.
+
+
+5927	Industrial_and_Scientific_5	POS	5.0	Not sure why they sell Goop under all these different labels- it's all the same stuff.  But the good news is that Goop is a really useful adhesive.  It's strong and easy to remove off of smooth surfaces.  I use Goop on my race motorcycle to keep nuts and bolts from getting lose.  Unlike RTV, Goop is easy to remove with a pair of pilers. However, unlike RTV, it doesn't stand up to high temperatures as well, so I can't use it on the nuts which keep my exhaust headers in place.  But Goop works just fine for just about everything else.
+A couple of months later AND with the weight of the romex cable and switch box literally hanging by this connection; these connectors are just as sure tightly held as the day I inserted the wire and lowered the lever.
+2363	Industrial_and_Scientific_5	POS	5.0	Does the job well as described and advertised.  A little pricey but probably worth it.  Don't drop it and damage the tip - that's the whole value of these bits.
+
+4459	Industrial_and_Scientific_5	POS	5.0	It's a check valve and does exactly what it is designed to do, but cheaper than buying the identical check valve in the big box stores.
+8478	Industrial_and_Scientific_5	NEG	2.0	Guess I was expecting more for the price. Could have had a piece cut at my box store for half the price
+
+3381	Industrial_and_Scientific_5	POS	4.0	The product is correct - there is a LOT of foam in this can.  I have little doubt about the accuracy of its claim to be able to seal and insulate up to 4 windows.  The product is relatively easy to use, but be certain to follow the instructions to "dispense SLOWLY" (their emphasis).  It comes out fast until you get used to the trigger on the applicator tube, and does expand very rapidly.  A very small amount of practice before first use would be helpful.  Also, heed the instructions for proper mixing (shake for a minute, make sure the ball bearing inside is freely moving while shaking).
+
+6" 6mG
+1265	Industrial_and_Scientific_5	POS	5.0	This is the greatest toothpaste delivery system. It used to be available at Sams and Costco but both stopped carrying it. None of the refills from Amazon have the dispenser unit included so I was lucky to find 3 left over from past usage. Amazon should include the dispenser. Now I have to take care of my dispensers and run them through the dishwasher occasionaly.
+624	Industrial_and_Scientific_5	POS	5.0	it does what it is supposed to do.
+4250	Industrial_and_Scientific_5	POS	5.0	Great for trimming leaves off plants. Etching and great for shaving.
+3810	Industrial_and_Scientific_5	POS	5.0	Although this has less PSI rating than other JB Weld products, it dries quick and once it cures it looks black & hardens very well.  I use it to repair small & minor body damage/corrosion on my car.
+7602	Industrial_and_Scientific_5	POS	4.0	Bought this for my first aid kit. It small, light and handy to have when checking for a possible concussion. If you have little ones, you may find your self reaching for this often after a nasty fall. If you need a decent pen light, this is a pretty good light.
+6556	Industrial_and_Scientific_5	POS	4.0	This unit works really good and seems to hold zero well. It is accurate enough for home use. Made in China so who knows how long it will last.
+--pat
+Mine was about 1/8" short on length and width, and yes, it did have a few small scratches on one side.  But I gave 5 stars because:
+2685	Industrial_and_Scientific_5	POS	5.0	7/3/2016.  Excellent silver-based thermal material.  Strongly advise to go to articsilver web site and read the installation instruction. It may save you a bad mistake that can damage your processor..
+- This frequency range does not cover cell phones or cordless phone signals, microwave oven radiation, or other high frequencies often referred to as RF (radio frequency).
+1605	Industrial_and_Scientific_5	POS	4.0	I have purchased and used both the DAP clear sealant and this DAP white sealant regularly around my house for a variety of tasks, indoor and out.  The white works as well as the clear and seals very well, is flexible waterproof, crack-proof and paintable. DAP is also mold and mildew resistant.  The white coloring blends well into white surfaces with the need for painting.
+5863	Industrial_and_Scientific_5	POS	4.0	its ok
+The second repair project was for a shoe with a sole that had delaminated.  After being gouged by the only shoe repair shop within a reasonable distance of my residence, I decided to do this repair myself.  My concern originally was that I didn't have a hydraulic press to provide adequate compression during the drying process.  Fortunately, I was able to find two hardware clamps that worked well.  At the time, I didn't realize how important this was as Gorilla Glue expands so much that without mechanical clamps, too much polyurethane would have formed between the sole and body of the shoe. Hence, I was surprised to find a fairly significant mess the next morning as the expanded glue leaked out and dried onto the sides of the sole.  While this mess was an irritation, the sole had remained firmly attached.
+3413	Industrial_and_Scientific_5	POS	5.0	Needed large trash can for whole house clean out. When it's time to get serious about clutter or junk make it easy to get rid of the stuff.
+8010	Industrial_and_Scientific_5	POS	4.0	copper rod it is.
+3500	Industrial_and_Scientific_5	POS	5.0	Check Blood pressure
+5738	Industrial_and_Scientific_5	POS	5.0	Works as described.
+8472	Industrial_and_Scientific_5	POS	5.0	I've used this to paint over my rusty hitch receiver.  The paint they use on them is thick, but water gets behind it and it flakes off and looks bad in a pretty short amount of time.  I bought this paint which is much thinner to see if it'll adhere better and look good for a longer amount of time.  I'm also using it to touch up anything that's rusty that used to be black.  Motorcycle frames, car starter motor covers, etc...  A tiny can goes a long way if you can find a way to keep it sealed from air.  I use a plastic bag between the lid and the can when I re-seal it because it'll glue itself into place otherwise.  Don't paint your skin with this unless you want a black spot on yourself for two weeks.  It doesn't come off with acetone or a scrub brush the next morning if you go to bed with it on yourself.
+
+1090	Industrial_and_Scientific_5	POS	5.0	OK
+5377	Industrial_and_Scientific_5	POS	5.0	Perfect fit for my application. Nice finish.
+I also recommend using a larger hole saw for the fuel line from the tank to the truck's fuel line.  My layout had the valve stem from the tank almost touching the angled truck bed, I had to enlarge the hole for the fuel line to pass through and give room for movement.
+8635	Industrial_and_Scientific_5	POS	5.0	A
+4224	Industrial_and_Scientific_5	POS	5.0	Works great
+Note: This glue will not stick to plastics very well, so for that, I use the old style Testors Cement For Plastic Models, No. 3512, 7/8 fl. oz. (25.8mL) (UPC Code: 0 75611 35120 9), and yes, it may be hard to find, as kids used to get high (and sick) from sniffing the fumes from it in a paper bag. Most model cements nowadays are safer to use, but do not stick as well. The old stuff would literally melt the plastic pieces being glued together. At this point, I am beyond putting together plastic models, but I find that the Testors glue is one of the best for plastics, and today, just about everything is made from one type of plastic or another.
+9759	Industrial_and_Scientific_5	POS	5.0	Great value for Super Glue.  You can find it cheaper in the stores, but its the best value I've found online.
+2703	Industrial_and_Scientific_5	NEG	2.0	Incredibly small. I've purchased much larger syringes with same material for same price at mechanical-supply houses. Barely had enough to do what I needed, let-alone have any as a spare.
+
+1410	Industrial_and_Scientific_5	POS	5.0	There is no substitution for Scotch tape! This is my go to packaging tape
+4576	Industrial_and_Scientific_5	POS	5.0	Exactly as described.
+251	Industrial_and_Scientific_5	POS	5.0	WORKS GREAT
+4391	Industrial_and_Scientific_5	POS	5.0	Just what I needed for my microfiber mop. Price and delivery were great
+8651	Industrial_and_Scientific_5	POS	4.0	exact fit
+I also went through 7000 Senco 18ga 1 1/2" staples in August with 0 jams.
+4501	Industrial_and_Scientific_5	POS	5.0	Strechy, holds paint well, but dries too fast for some fine finish work. It is difficult to clean up excess. If one goes slow and very carefully in application for finish / trim caulking, results can be good. So far, no shrinkage used on bare pine and hemfir trim prior to primer and paint. So far, no issues holding Sherwin Williams premium wall and window primer paint with Pro Classic on top of that. Problems cleaning up stray excess or caulk that dried too fast were the worst in very warm and dry temperatures.
+2848	Industrial_and_Scientific_5	POS	4.0	Just what you expect it to be. Strong enough to do the job, and not expensive either. If you do not have anything to keep your drill bits organized then this will save you a lot of frustration. Order what you need, as i believe these come in fractional sizes for jobbers bits, wire sizes for number bits, letter sizes for tapping bits, and maybe also metric sizes in millimeters.
+5781	Industrial_and_Scientific_5	POS	5.0	Has some great sticking power...  I'm using this to hold the vinyl belly of an RV back together after working on the insides.
+7735	Industrial_and_Scientific_5	POS	5.0	It's just as advertised.
+8707	Industrial_and_Scientific_5	POS	5.0	works real well, nice and loud
+9385	Industrial_and_Scientific_5	POS	5.0	Got another lathe, so got another one of these nice live centers. These are great and the price is very reasonable. I highly recommend this item.
+
+2586	Industrial_and_Scientific_5	POS	5.0	Good product.  Very pleased.
+3244	Industrial_and_Scientific_5	POS	5.0	Very Useful Thank You !
+3262	Industrial_and_Scientific_5	POS	5.0	Terrific little thermometer. Fast reaction time. Accurate. Will buy another for other home.
+2302	Industrial_and_Scientific_5	POS	5.0	Durable thick walled plastic.  Makes great drawers for sorting oily shop parts.
+
+6532	Industrial_and_Scientific_5	POS	5.0	Work in QA using Mitutoyo & Starret measuring tools all day. Those also cost 5 - 6x as much as this. If your a home hobbyist depending on what your needs are these are probably fine. If you're running a business its worth considering investing in good tools
+2694	Industrial_and_Scientific_5	POS	5.0	I used this between a 100W LED and its fan-cooled heatsink. I don't have any objective heat measurement on this assembly, but I can say that the results made me think I didn't need anywhere near as big a heatsink -- instead of one sized to fit a 120mm fan, I could probably be using one sized to fit a 40mm fan. Seems to be good stuff, and even though the tube is very small, a little goes a long way.
+6836	Industrial_and_Scientific_5	POS	4.0	The tester works as advertised and comes in an functional case for storage. The picture here only shows the sniffer, the emitter unit is a little square with various leads hanging from it. Both the sniffer and the emitter require a 9V block battery (not included, and a bit of a disappointment at this price point). On the other hand, the emitter features very robust adjustable clamps for bare wire as well as a telephone connector to make wire tracing of a telephone line easier.
+7859	Industrial_and_Scientific_5	POS	5.0	Came quickly, straight, and in a very stiff tube. If you need a single long piece this is the way to go.
+8117	Industrial_and_Scientific_5	POS	5.0	Nice material.
+They are annoying to put together and I highly recommend making it a two-person job, though I did do it alone.  The bad part is the plastic holders that hold the shelf and top in place, they like to pop off.
+2034	Industrial_and_Scientific_5	POS	5.0	I own a lot of Fluke gear and I wanted a set of probes to probe small SMD components. The probe tips are almost needle sharp and small enough that they can easily even fit in a breadboard. Although I would not advise that since you could damage your breadboard.
+-------------------------
+Goop is far superior to electrical tape for splicing wires, re-insulating cat-chewed wires, waterproofing and vibration-proofing electrical connections.  There is a black variety of "Shoe Goop" if you want your repair to be less noticeable.
+4918	Industrial_and_Scientific_5	POS	5.0	Great product!
+3400	Industrial_and_Scientific_5	POS	5.0	I like that the screws already match the shelf color. I sprayed the brackets black and was good to go. I am going to order a third bag, just to have on hand for my next project.
+I had a concrete fountain bowl that weighed over 200 pounds in the front yard.  Weather extremes and age caused it to break in half on the pedestal.  My failure to keep the drainage holes clean in winter might have had something to do with it.  I cleaned it up, propped up one half on its side, covered both halves thoroughly and liberally J-B Weld and placed the halves together.  I allowed them to sit there and cure for a week.  I then covered both sides with a thick layer of exterior construction Liquid Nails and allowed it to dry another week before placing the heavy bowl back on the pedestal. That was over a year ago.  The repaired joint will last longer than the original concrete.
+4655	Industrial_and_Scientific_5	POS	5.0	works great!
+6263	Industrial_and_Scientific_5	POS	5.0	After a well handled issued that I had with Fluke, they got me straight with this Voltage Tester and I could not be more pleased.  I fully respect (spelled correctly?) electricity and will not mess with connections unless I know beyond any reasonable doubt that the power is off.  Over the years, I bought several of those really cheap testers each of us has and they worked o.k.,  until this past year.  I put the red and black to the line and it said it was not hot (electrical talk).  But when I unwound a wire nut and started to unwind the two wires.  ZAP!!  That jody was hot.  It almost lit me up.  With several electrical jobs  waiting for my attention, I put my faith in the Fluke iAC-A1-II and they gained a new customer.  It worked well and without any problems.  I can even open it, now.  When it comes time for different type testers and so forth I will be checking out Fluke.
+
+
+7292	Industrial_and_Scientific_5	POS	5.0	Good substitute for the electrical tape.  No more wrapping.
+(4)  Mine came with a bent locking part on the ring.  Another example of poor Amazon packaging.
+
+5626	Industrial_and_Scientific_5	POS	5.0	Excellent quality, good buy.
+3089	Industrial_and_Scientific_5	POS	4.0	It works
+  -- second, surface preparation is just as important as the adhesive you use.  If you have gun oil, or dust, or finger-prints, or other contamination on either surface being bonded, the adhesion will fail.  So before you use ANY adhesive, clean all hardware (nuts, bolts, screws, etc) AND any threaded holes in items you are gluing, anything into/onto which the bolt or nut will be threaded.  If you have unlimited resources, you can buy the recommended Loctite primers.  I'm dirt poor, and a can of acetone from the hardware store (applied with an old toothbrush and pipe-cleaners) works great for me, and cost maybe 10% what the Loctite stuff goes for.  [ Note - Loctite Primer N 7649 actually **IS** acetone; nothing more. ]
+The package indicates the self-drilling is limited to wood, although it will likely work for most plastics as well.  They are not designed to self-drill in concrete or metal, including sheet metal. However, the product is simply advertised as "self-drilling" without any additional information, or otherwise I would give it 5 stars.  I feel this is deceptive advertising.
+EMF FROM LOWER FREQUENCIES:
+8100	Industrial_and_Scientific_5	POS	5.0	Aluminum rod.  What is there to say.
+As to how hard the box is to get open... I can imagine it would be difficult for the very young or the very old.  Which might not be such a bad thing for safety reasons.  Everybody who can reasonably be expected to use the product properly and safely should be able to get the box open within 15 seconds by cutting the label on both the front and back of the box and then pressing in on the sides while pulling the halves apart.  Not rocket science, doesn't take great strength, just a bit of understanding, adult-sized hands and the ability to use those hands effectively.
+3229	Industrial_and_Scientific_5	NEG	2.0	Did not work for me- actually made the compressor on my RV camper (Polar Cub 9200) noisy and hard to start.  I checked and double checked the wiring-
+1800	Industrial_and_Scientific_5	POS	4.0	A quality fastener, that will certainly work for all kinds of projects.
+
+If you have any quesitons- ask.
+
+6732	Industrial_and_Scientific_5	POS	5.0	this is another item everyone should have in their kit.  You can cut a penny in half with these.  leather, fabric, etc. there's a reason why paramedics have these. If your job requires you to quickly solve problems this is another great tool for the arsenal.
+6014	Industrial_and_Scientific_5	NEG	2.0	I read the reviews and noted the scope worked great and was a nice "adult" size.  I was thrilled because it's a needed item and in my daugther's favorite color.  In the end, the scope really isn't long enough to work comfortably on patients and the sound wasn't the best either.  When outside noises are a distraction, the scope isn't the best. My daughter uses her scope everyday and needs quality not novelty.  I returned this item with no trouble at all from the vendor --- but in the end, you get what you pay for. This, unfortuantely is $20 for orange rubber....
+786	Industrial_and_Scientific_5	NEG	2.0	Photo cell is too low.
+4' 1.3mG
+6287	Industrial_and_Scientific_5	POS	5.0	I used this to check for live wiring when doing an installation. No issues with the device. Construction is good and not heavy to carry in your pocket.
+6482	Industrial_and_Scientific_5	POS	5.0	As described.
+677	Industrial_and_Scientific_5	POS	5.0	Good quality
+9970	Industrial_and_Scientific_5	POS	5.0	I bought a one pound box of these screws to replace all of the lame size screws they installed on all my kitchen cabinet doors, they work very well and just the right size, very pleased.
+8600	Industrial_and_Scientific_5	POS	5.0	What can I say? There's NOTHING like Gorilla Tape. It holds anything, anywhere. It's like Duct Tape x100.
+The thicker formula, on the other hand, just takes too long to dry, for my needs, and you pretty much have to clamp whatever you're trying to glue together when using it.
+3588	Industrial_and_Scientific_5	POS	5.0	great
+
+5429	Industrial_and_Scientific_5	POS	5.0	Good
+3763	Industrial_and_Scientific_5	POS	5.0	This was perfect for what it was intended it to do.
+BROOKLYN, NY, 11220
+5864	Industrial_and_Scientific_5	POS	5.0	If you like duct tape...
+
+Throw out your "Wire Nuts" forever.  Seriously!
+321	Industrial_and_Scientific_5	POS	4.0	DeWalt makes good blades.  Some will argue they are expensive, but in the long run they out last the competition.  Just be sure to follow to follow the safety instructions.  I recommend w/o reservations.
+[...]/ and if that link doesn't come through look on flickr and search for
+7705	Industrial_and_Scientific_5	POS	5.0	good quality
+8492	Industrial_and_Scientific_5	POS	4.0	Received as described. Fast shipping and works fine.
+3165	Industrial_and_Scientific_5	POS	4.0	Work well. Fast delivery.
+9291	Industrial_and_Scientific_5	POS	5.0	Just what I needed.
+
+Drill Chuck Required to hold shank: 1/4
+3616	Industrial_and_Scientific_5	POS	4.0	I mail a lot of packages throughout the year, and some brands of mailing tape are absolutely maddening because the end keeps sticking back down on the roll and it takes forever to pry it up again.  Not so with this product.  I was able to tape up my boxes easily with very little stress.
+2" Straight Pegboard Hooks (count of 4)
+6072	Industrial_and_Scientific_5	POS	5.0	awesome with the triple color scale, makes readings easy to see
+3653	Industrial_and_Scientific_5	POS	5.0	Same quality and I'm happy with the price
+
+5739	Industrial_and_Scientific_5	POS	5.0	Good tape
+5141	Industrial_and_Scientific_5	POS	5.0	Works as expected.
+5533	Industrial_and_Scientific_5	POS	5.0	First of all, what is pictured in the Amazon description is incorrect. Amazon is showing the GB 10-113 instead of the GB 10-114. I included a picture so that it's more clear as to what you will actually receive if you order these spades terminals. (Note that the 'forks' are wider on the 10-114 and the gap between the forks is wider than the 10-113.)
+2430	Industrial_and_Scientific_5	POS	5.0	Arrived as expected and excellent product.
+300Hz-3kHz VF
+
+a broken handle, I glued it back on, just to see if it would work
+To increase security I drilled a 3/16" hole in the carriage plate to secure a nylon tie. This reduces the opportunity of someone releasing the carriage from the outside. I've done this modification on 2 previous carriages, and there was no impact to the sturdiness of the carriage.
+1802	Industrial_and_Scientific_5	POS	5.0	Its gorilla glue, its very strong
+8642	Industrial_and_Scientific_5	POS	5.0	No problems
+7027	Industrial_and_Scientific_5	POS	5.0	Stuff flows through it well.
+5140	Industrial_and_Scientific_5	POS	5.0	Sharp, sturdy, heavy duty. The containers are nice - will be reusing mine for storing stuff after they're empty. The slot on top will allow me to hang them up and organize.
+kHz = Kilohertz (1000/s)
+The balls are smooth and have a nice heavy weight to them.  They are about the same size as a standard shooter marble.  For what I needed excellent value.
+4181	Industrial_and_Scientific_5	POS	5.0	Part of the medical items that should be kept in a medical kit suggested by a nurse. For the prepper kit.
+3671	Industrial_and_Scientific_5	NEG	2.0	Quality is not very good. Kinks alot.
+1532	Industrial_and_Scientific_5	POS	4.0	works as expected.
+9741	Industrial_and_Scientific_5	POS	4.0	best price I could find.
+7052	Industrial_and_Scientific_5	POS	4.0	I wanted to replace the output hose for my Katadyn pocket water filter with a longer hose, and after several attempts ordering the wrong size, I found that the right size is 3/16" I.D., 5/16" O.D. (and 1/16" Wall). It's not exactly the same as the Katadyn hose- the inner diameter is larger, and the wall is thinner (see the photos I uploaded), but it works. The metal clip fits around the outside, and the hose fits tightly around the output nipple of the filter. I'm only using this for output, so I can't say for sure if it would work for the input hose (where a tight seal is critical to maintain vacuum), but I think it would.
+
+So far, once I figured out how to wrap my containers, I have had no issue with the tape coming loose or gapping.
+
+714	Industrial_and_Scientific_5	POS	5.0	If you don't have any "self-fusing silicone tape" in your shop, you need to buy 3 rolls right now. The first time you use it, you will understand exactly what I am talking about. I don't care what fancy expensive electrical tape you have used in the past, it absolutely does not compare.
+4561	Industrial_and_Scientific_5	POS	5.0	Great value!
+6125	Industrial_and_Scientific_5	POS	4.0	Good quality and value.
+1688	Industrial_and_Scientific_5	POS	5.0	Heavy duty and non marking.  Love them
+IRPA - International Radiation Protection Association
+5276	Industrial_and_Scientific_5	POS	5.0	Amazing stuff, one of the few products I've seen lately that lives up to it's own hype.
+1436	Industrial_and_Scientific_5	POS	5.0	Superb.
+4678	Industrial_and_Scientific_5	POS	5.0	Product quality is great, screws have clean threads and the spring nuts thread nicely.
+
+7966	Industrial_and_Scientific_5	POS	5.0	I can't test the purity, but it does the job intended. I like it.
+8317	Industrial_and_Scientific_5	POS	5.0	perfect for my application
+6967	Industrial_and_Scientific_5	POS	5.0	Exactly as described. .25"ID, .5" OD has a nice thick wall. I maxed out my Mityvac on the whole 10ft section (~30Hg) and the walls didn't collapse in. Great for vacuum applications!
+Enlarge an existing hole, while keeping the center of the hole unchanged.
+6452	Industrial_and_Scientific_5	POS	4.0	As described.
+6674	Industrial_and_Scientific_5	POS	5.0	I bought these for my vet techs in my veterinary clinic for getting heart rates on patients. They're super lightweight, easy to learn on, and provide good clarity with auscultation. They're not as good as the Littmann Cardio III or Master Cardiology, so I wouldn't necessarily recommend these for doctors that depend on auscultation. For support staff that are running around like crazy and just need to get vitals, these are perfect.
+2757	Industrial_and_Scientific_5	POS	5.0	Great Product.
+1420	Industrial_and_Scientific_5	POS	5.0	super nice, heavy tape...  would have been better if not arrive smashed so that it won't 'roll' in my taper... but I couldn't bring myself to force Amazon to replace it just cuz UPS smashed the box it came it.  I sell on eBay and want the boxes STRONG in shipment for just that reason!!  Or long lasting strength for boxes in storage.  Skip the cheap stuff, this is what you want.
+9369	Industrial_and_Scientific_5	POS	5.0	Definitely a must to use on the lathe.  Worth every penny.
+2880	Industrial_and_Scientific_5	POS	5.0	Exactly as described.
+The Aluminum rods were perfect for our project.
+5103	Industrial_and_Scientific_5	POS	5.0	If you're looking at this, you know what it is.  Quality is good, and met my expectations.
+245	Industrial_and_Scientific_5	POS	5.0	These work great with little to no jams.  But get a much bigger box than you think you'll need.  You'll save more in the long run.
+3530	Industrial_and_Scientific_5	POS	5.0	Works great for almost any indoor (or outdoor) caulk job!
+3095	Industrial_and_Scientific_5	POS	5.0	Works well.
+4511	Industrial_and_Scientific_5	POS	5.0	This dries significantly slower than most other caulks.  I hope that it lives up to its reputation for longevity.  Will see and update in a year.
+I use this stuff everywhere.
+7920	Industrial_and_Scientific_5	POS	4.0	Nicely machined.  Four stars only because they put a huge upc sticker on the end that takes forever to get off.
+6327	Industrial_and_Scientific_5	POS	5.0	Very accurate. As in spot on reference blocks. Highly recommend this for hobbyists.
+
+Pegboard Tool Holder (count of 5)
+6628	Industrial_and_Scientific_5	POS	5.0	Exactly what I expected.
+5153	Industrial_and_Scientific_5	POS	5.0	these are real hard things. but they would work much better woth the stanley heavy duty stapler
+1676	Industrial_and_Scientific_5	POS	5.0	Recently made stands for all my shop benchtop tools.  Used locking spinners on one only to find they are just not stable enough for the job.  Put two of these on the back of the stand and two locking spinners on the front and voila, stable, nothing moves when working a piece.  Make sure you get matching locking spinner casters to get the height even.
+* Surface needs to be damp for the glue to work
+3127	Industrial_and_Scientific_5	POS	5.0	Used it to replace Three Bond 1208D liquid gasket  on the bi-speed case of my Kubota B2400 when I had to replace the axle.  No leaks.  What more can it do.
+8040	Industrial_and_Scientific_5	POS	5.0	five starts
+
+7629	Industrial_and_Scientific_5	POS	5.0	Can't ever go wrong with VELCRO brand products and this one doesn't disappoint either.  I like buying quantity rolls like this and the quality of the tape is the best available.
+5961	Industrial_and_Scientific_5	POS	5.0	cheapest I could find 25 of them and worked great when I repalced the gutter nails with the screws to take down in the future when I painted my house again
+6076	Industrial_and_Scientific_5	POS	5.0	fast ship and as described
+4649	Industrial_and_Scientific_5	POS	5.0	Its a washer it works as it is supposed to and it is well made unlike some of the other foreign stuff on the market
+4018	Industrial_and_Scientific_5	POS	5.0	Just what I wanted
+5884	Industrial_and_Scientific_5	POS	5.0	THIS IS THE BIG DADDY OF PLASTIC TAPES AND I HAVE USED IT FOR EVERYTHING FROM MENDING AN RV COVER TO HOLDING TOOLS IN PLACE IN MY TOOL KIT,  EVERY HOME NEEDS THIS TAPE,
+9355	Industrial_and_Scientific_5	NEG	1.0	This is GREAT 100% Silicone.  Exactly the same as the original GE Silicone Sealer that was invented AGES ago.
+1142	Industrial_and_Scientific_5	NEG	1.0	I used it on a pellet stove vent pipe and I had to seal over the edges of the tape with high temp silicon sealant after I found ash was blowing out around taped joints. Useless on flue pipe joints that never exceed 200F. High temperature flue tape? Not this one!
+6932	Industrial_and_Scientific_5	POS	5.0	Great price,fast shipping
+8223	Industrial_and_Scientific_5	POS	5.0	High-quality material highly recommend.
+5608	Industrial_and_Scientific_5	NEG	2.0	Why Bother With Reviews, Amazon deletes the truth when it hurts.
+2044	Industrial_and_Scientific_5	POS	4.0	they are original fluke and they extend, i am not an electrician but you can see quality
+WD-40 has no place in the home. It should be sitting in a museum. It's an inferior lube and rust preventer. It attracts grime and grit like a magnet. Not only does it suck as an oil, it will negatively affect moving machine parts. Use other oils and greases available.
+8762	Industrial_and_Scientific_5	POS	5.0	Memory wire is made with hardened steel which holds it's shape very well and is very springy. It will destroy normal wire cutters fairly quickly by damaging them every time you cut memory wire with it.
+9500	Industrial_and_Scientific_5	POS	5.0	THESE ARE SUPER.  LOOKED AT SEVERAL ON LINE AND IN THE BOX STORE.  BEST PRICE IS HERE.  QUALITY IS GOOD TOO.  I DID NOT REMEMBER THE LITTLE BLACK PLASTIC PIECES ON THE WEB SITE.  AT FIRST I DID NOT KNOW WHAT THEY WERE BUT MAN, THEY WORK GREAT, NO MORE HOOKS FALLING OUT WHEN I USE THAT TOOL THEY WERE HOLDING.
+1492	Industrial_and_Scientific_5	POS	5.0	Great spray bottles
+
+6527	Industrial_and_Scientific_5	NEG	2.0	The locking screw was bent when it arrived. Beware.
+7628	Industrial_and_Scientific_5	POS	5.0	You can stick it anywhere.  I know what you're thinking.  Shame on you.
+4198	Industrial_and_Scientific_5	POS	5.0	came on time everything intact as expected would order again
+Philips acquired the Seattle-based company Optiva Corp. (the original maker of Sonicare) in 2000. When Optiva first introduced the Philips Sonicare Advance circa 1992, it was unlike any electric toothbrushes on the market. Sonicare Advance used a piezoelectric multimorph transducer, which was a patented technology developed by Optiva Corp. The technology allows the Sonicare Advance to produce a dizzying 31,000 brush strokes per minute (BSPM)! No other brand of electric toothbrush has been able to rival its performance before or since (sorry,&nbsp;<a data-hook="product-link-linked" class="a-link-normal" href="/Oral-B-Triumph/dp/B000U08ZN4/ref=cm_cr_arp_d_rvw_txt?ie=UTF8">Oral B Triumph</a>&nbsp;and&nbsp;<a data-hook="product-link-linked" class="a-link-normal" href="/Crest-Spinbrush/dp/B00170KCXC/ref=cm_cr_arp_d_rvw_txt?ie=UTF8">Crest Spinbrush</a>).
+8581	Industrial_and_Scientific_5	POS	4.0	Heavy duty tape!!  I was disapointed in the size of the rolls.
+
+tapered the shaft with a file, got a new regular toothbrush with a thick handle, cut it in the thickest part,
+on a jagged edge, instead of a nice smooth surface, it has held
+9754	Industrial_and_Scientific_5	POS	4.0	Great item!!
+2550	Industrial_and_Scientific_5	POS	5.0	You could do far worse than buying this. I see no difference in quality between this epoxy, and other, name brand, 5 minute epoxies.
+1294	Industrial_and_Scientific_5	POS	5.0	Been using with no problems!
+125	Industrial_and_Scientific_5	POS	5.0	Fits as advertised.
+306	Industrial_and_Scientific_5	POS	5.0	Used to shave down jagged edges on a metal/iron gate, worked awesome and didn't have any issues.
+7152	Industrial_and_Scientific_5	POS	5.0	I just received this package of  18-8 Stainless Steel Flat Washers and they fit the bill for my use with small machine screws and nuts, used where rusting is an issue. They have the Plain Finish look and meets DIN 125, M3 Hole Size, 3.2mm ID, 7mm OD, 0.5mm Nominal Thickness, (Pack of 100).  They will occasionally be used in securing electronic boards to enclosures and in some other applications involving beads and jewelry. I love em.
+
+2267	Industrial_and_Scientific_5	POS	5.0	Gorilla glue, the mighty ape! Could be used for something in guerrilla warfare.
+1011	Industrial_and_Scientific_5	POS	5.0	Oh boy, I can do some air hammer nailing now.
+2008	Industrial_and_Scientific_5	POS	5.0	These test leads are made very well.  The lead wires are highly flexible and apparently consist of very fine copper strands.  Move about in nice fluid motion without hindrance or hesitation.  Very nice leads...made very well.  Quality.  Impressed and pleased with them.  Furthermore the 'Fluke AC175 Threaded Slide-on Alligator Clip Set with Flexible Boots' fit these leads perfectly.
+Ships from and sold by Quality Distributing LLC.
+8995	Industrial_and_Scientific_5	POS	5.0	Works as advertised
+
+
+8589	Industrial_and_Scientific_5	POS	5.0	Very strong
+Reasons:
+staples and tacker work well
+The item says its 75VA but it is actually only 50VA. It didn't affect me but it could be a problem for others.
+The only things I wouldn't use these for are certain applications that need a very tight hold. For applications where you need something to practually be glued down to something else, but still need to be able to remove it *sometimes*,&nbsp;<a data-hook="product-link-linked" class="a-link-normal" href="/Velcro-Industrial-Strength/dp/B00006RSP1/ref=cm_cr_arp_d_rvw_txt?ie=UTF8">Velcro Industrial Strength</a>&nbsp;is much much better. I've used the industrial strength stuff to install some gadgets in my car and the things might as well be glued down, except for the fact that I can remove them (which takes some real force) for maintenance etc and put them back with the same glue-like level of hold.
+4174	Industrial_and_Scientific_5	POS	5.0	GREAT
+Here are my observations:
+6347	Industrial_and_Scientific_5	POS	5.0	Very well put together and sent quickly.  Rough running at first, but that is because they don't oil it down with mineral oil to send it out.  Now that it is oiled it runs pretty smooth.  Also read the short simple instructions and you will be able to realize that most if not all problems have been dealt with (at least so far as my experience is concerned and I have been using micrometers for quite a few years now as a Mechanical Engineer in the shop ;))
+3352	Industrial_and_Scientific_5	POS	5.0	Item arrived on time. DAP is a trusted name in the construction field. This stuff has so many useful purposes and hides a multitude of sins (i.e. uneven gaps between molding and ceiling or wall, nail holes in sheetrock, around tub and tile for a professional finished look, attaching any type of backsplash, hiding hairline fractures in older homes where the sheetrock has separated)
+6251	Industrial_and_Scientific_5	POS	5.0	Best Volt Meter I Have Found
+182	Industrial_and_Scientific_5	POS	5.0	Good for bathrooms, doors, etc
+7483	Industrial_and_Scientific_5	POS	5.0	a++++++
+
+476	Industrial_and_Scientific_5	POS	4.0	Not as durable as I expected. Lightweight.
+5245	Industrial_and_Scientific_5	POS	5.0	This is good for small jobs like putting a thin layer over the plastic tub tape and touch ups.
+Other reviewers have noted problems with this tape removing paint and other finishes from the surface it was stuck to. In my opinion, you have a choice here: protect the finish or hold something in place. If you want to protect the finish, use masking tape. By the time you escalate to this kind of tape, you've decided "holding" is more important than preserving the finish, and you can proceed accordingly.
+9643	Industrial_and_Scientific_5	POS	5.0	Some really sticky stuff here.
+289	Industrial_and_Scientific_5	POS	5.0	Solid Dewalt product.  The unit is incredibly strong and rigid making it impossible to believe it would not apply pressure evenly.  It is top quality as I expect and the Dewalt genuine name is unquestionable.  Love these Dewalt products.  I buy them whenever I get the chance.
+2931	Industrial_and_Scientific_5	POS	4.0	The only way to rate it any higher is to make some part of it out of metal. It is cheaply made, but works. What else can I say?
+1727	Industrial_and_Scientific_5	POS	5.0	Works great
+1578	Industrial_and_Scientific_5	POS	5.0	Works well will buy again.
+9238	Industrial_and_Scientific_5	POS	5.0	Great Product!
+2704	Industrial_and_Scientific_5	POS	5.0	Great product, only need to use a fraction of the tube. Lowered my temps about 5 deg Celsius - this is because most CPU manufacturers use cheap thermal compound. I suppose if you bought a baller gaming CPU/heat sink it's possible you won't see as much of a difference.
+8975	Industrial_and_Scientific_5	POS	5.0	Good strong magnet that will hold up well. I placed a 1/4 inch bolt through the center hole and used it to mount items in a storage container.
+It is not the cheapest microwave for its power level or volumne capacity.
+9204	Industrial_and_Scientific_5	POS	5.0	Good product.  I paid a little more than the cheapest ones, and this one actually is decent.
+8984	Industrial_and_Scientific_5	POS	5.0	What can you say about brads?  Well unlike some of the off brand these feed evenly and work well!  I bought some brad x from the local ACE store and they double and triple fired and jammed.  If you have  a Bostich gun stick to these.
+3003	Industrial_and_Scientific_5	POS	5.0	Good product.
+7784	Industrial_and_Scientific_5	POS	5.0	Exactly what I wanted and very fast delivery.
+3117	Industrial_and_Scientific_5	NEG	2.0	I bought this item based on the good reviews and I thought it would save me money by prolonging the filter life. However things did not go as planned. One of the units broke down less than 1 month of use. Luckily it was still in the return window and I easily got it exchanged. For those who wonder, I did not dip it all the way down , so it was not my obvious fault it broke down. Second one has been working fine in terms of getting on and off as it supposed to but the readings of the same sample within ten minutes is completely different. The variation is more than 10%, so accuracy is questionable. Besides, I change the filter and compare the before and after readings and do not see a change at all. You can say that the filter itself is not working and it may be true, but I feel the difference in taste while this machine sees nothing in numbers. So if I had a second chance, I would not buy this item, yet so far it has saved me nothing at all.
+2299	Industrial_and_Scientific_5	POS	5.0	Worked great for grinding meat into and for mixing the seasonings before we stuffed the casings.
+5798	Industrial_and_Scientific_5	POS	5.0	Gorilla Tape. Period. Get some.
+9914	Industrial_and_Scientific_5	POS	4.0	Good price/quality balance.  Wish channels can be ON/OFF independently
+5618	Industrial_and_Scientific_5	POS	5.0	I was refurbishing my 99 s10, putting New door pins in, and these were cheap enough to go ahead and replace while I was at it.
+8104	Industrial_and_Scientific_5	NEG	2.0	Inaccurate O.D. 1/32" to large. Had to return.
+* It works!  No magic smoke! Almost no overshoot on my initial tests.  While I do not have a bench constant load module, what limited tests I have done seem to work very well.
+It delivers more power.
+4352	Industrial_and_Scientific_5	POS	5.0	I needed inexpensive packaging tape at the lowest cost and these were it.
+2607	Industrial_and_Scientific_5	POS	5.0	restocking my depleted stock... good quality was as expected.
+5225	Industrial_and_Scientific_5	POS	5.0	They're rivets......They do what rivets do.  Hold stuff together.  Pretty well so far actually.
+1943	Industrial_and_Scientific_5	POS	5.0	This is the real thing!  I've bought other transparent "duct tapes" before, but they were simply heavy transparent tapes.  This is what it says: TOUGH!  I've used it in exactly the same way as regular duct tape and it holds beautifully.  It can be seen, but it is so much less obvious that it suits my needs perfectly--to hold things still and securely and not be an ugly, stick out color that looks just awful with the surroundings.  One application is that I'm using it to hold a little throw rug in place to keep my cats from digging at the carpet underneath it.  It works.  It's as if they've forgotten about where they used to scratch at the spot, and they are leaving the throw rug alone while it's held securely, almost invisibly in place.  It sure looks better than that hole they were scratching in the carpet, thanks to this transparent duct tape.
+469	Industrial_and_Scientific_5	POS	5.0	rags in a box whats not to like
+The shank is formed to fit 1/4 hex drivers. The amazon product photo does not show these newer driver style shanks (at the time of this review).
+2365	Industrial_and_Scientific_5	POS	5.0	This hoist is awesome. I have a folding Trailer that is very heavy and awkward to fold and put upright to store. This hoist works perfect! Not only did it make folding and lifting the trailer effortless, I actually unintentionally lifted the entire trailer on first use!  Used angle iron and lag bolts to mount to ceiling joists in garage.
+2276	Industrial_and_Scientific_5	POS	5.0	Or something. Fixed my desser drawer. Still holding fine with use. Serious glue. Make sure you read directions before using.
+5640	Industrial_and_Scientific_5	POS	5.0	I love this stuff, when your a big person you need something that's gonna stick but not take skin off when you pull it off....I will not run out of this tape again....love it
+1511	Industrial_and_Scientific_5	POS	5.0	AAA
+7221	Industrial_and_Scientific_5	POS	5.0	The Sawyer Water Filter ! Both Ends ! 5/16 " ID Fits So Perfectly ! A Perfect Grip ! On Or Off ! Prying ? Optional ! Cut As Needed ! Inside The Bottle Or Out ! Food Grade Soft Silicone ! And The 1/2" OD ? Impressive ! Snow White ? Almost ! And So Soft And Rubbery ! Thanks Amazon ! All Good ! 10 Feet !
+The spray is oily, but once it dries up it becomes like a wax.
+6597	Industrial_and_Scientific_5	POS	5.0	Best you can buy
+over the 27mm port on Festool sanders, routers, jigsaws.
+- Low Frequency Range Examples:
+79	Industrial_and_Scientific_5	POS	4.0	It will take some time, as I am trying to even up and entire patio of wandering cement.  But eventually we will be done.  And the Dewalt small angle grinder kit I bought with it is too cool!  Power hand tools are so much fun.
+
+1338	Industrial_and_Scientific_5	POS	5.0	This is handy for all kinds of jobs, not just rolling out your garbage.  We have used it to move many heavy items around the yard and garage.  You can even stand on it (if you are not more than 250 pounds) and roll it around.
+4697	Industrial_and_Scientific_5	POS	5.0	I have used a bunch of super glues that claim to glue everything. I think it is handy to keep them around for various purposes. However, in most cases, the life of the glue is way shorter than the expected since the unused glue starts solidifying in time leaving a nasty unusable junk behind. That is a bad surprise I came across many times especially when there is a long time between two consequent uses.
+1989	Industrial_and_Scientific_5	POS	5.0	Product works very well for intended purpose.  Decent pricing.
+1506	Industrial_and_Scientific_5	POS	5.0	Exactly what I expected.
+Ordinary (slow) epoxies (whether JB Weld or other epoxies) dry harder than quick epoxies and are generally the best choice.  Maximum strength is the whole point of epoxies--if you don't need maximum strength---you probably do not need epoxy.  Use quick epoxies when 1) the hardening speed is essential, 2) when the item cannot be supported in the required orientation while the epoxy sets (at least several hours), or 3) when you have to absolutely minimize flowage.  Super-glue is often a good alternative in such situations.
+8729	Industrial_and_Scientific_5	POS	5.0	There isn't much to say. They work as advertised, their design is unique and really sucks two pieces of wood together. A square drive bit is included, which is a nice plus. Made in Germany and USA.
+8659	Industrial_and_Scientific_5	POS	5.0	This latch dropped right into the space available on my slider, and looks identical
+Top:
+8043	Industrial_and_Scientific_5	POS	5.0	Shipped promptly and arrived well packaged.  It's the grade of stainless steel I needed for a LOW PRICE. I'll order again!  Thanks-
+The larger sections of the pole function by means of a V-pin with two buttons on opposite sides of the pole. Rather like a swiffer pole. Just the same as that device, this one can be difficult to press. It can pinch your fingers, you've got to twist it to find the right spot. It wastes time, which wastes money. That's my least favorite element, but otherwise these are a good product.
+8484	Industrial_and_Scientific_5	POS	5.0	It's a hose and a very well made product.
+8195	Industrial_and_Scientific_5	POS	5.0	Used as a led light poll on my can am commander.
+8872	Industrial_and_Scientific_5	POS	5.0	just what i was looking for
+
+Not sure if I just got a bad roll or if other reviewers used the tape for other purposes.  But there's no way I'd ever buy another roll of this.
+
+2999	Industrial_and_Scientific_5	POS	5.0	It's a wonderful tool, very fast and effective. Somewhat heavy if you use it a for a prolonged periods of time. Otherwise great. Don't try to cut any corners by overriding its safety features. It's safe if you work safely.
+
+582	Industrial_and_Scientific_5	POS	5.0	It does the job.  Good quality electrical tape.
+You can't just store this item in a drawer, pull it out, and expect to use it immediately to get an accurate reading without proper preparation/maintenance.
+3) Repair of plastic scissor handle: Didn't hold.  It appears that lack of a large, porous area made Gorilla glue a poor choice, which is what expected in the first place.  Will try a cyanoacrylate alternative.
+6557	Industrial_and_Scientific_5	POS	5.0	works like its suppose to, and I haven't had the need to use the second battery yet.
+-Glue is not clear but yellow. Very noticeable, not good if you really want a clean finish.
+
+6755	Industrial_and_Scientific_5	NEG	1.0	Toothbrush worked great for less than two months. Now it won't turn on. I've tried replacing the batteries to no avail. I guess you get what you pay for. Will no longer purchase Philips products.
+408	Industrial_and_Scientific_5	POS	5.0	Good!
+4494	Industrial_and_Scientific_5	POS	5.0	I bought this (relatively expensive) caulk solely on the reviews of others, and I have to say that this is the best caulk that I've ever used. It works nice, looks great when setup, and it does have the ability to fill fairly large gaps without cracking over time -- I've personally used it on gaps up to 1/4". Used with a high-quality drip-less gun, this is the ticket. It costs more, but caulking isn't something that you want to redo after it cracks 5 years down the road. Highly recommended.
+3755	Industrial_and_Scientific_5	POS	5.0	Good value.
+6247	Industrial_and_Scientific_5	POS	4.0	Fluke quality, but I gave it 4 stars because it's a pain in the as- to operate, they should of left off the turn the beeper off option .Then it would have gotten 5 stars
+6744	Industrial_and_Scientific_5	POS	4.0	it works just fine but within two months it started oozing something ugly it just keeps oozing thanks
+6020	Industrial_and_Scientific_5	POS	5.0	Nice quality.  I used it with aquariums.  Better than the hoses usually supplied with large filters.
+
+
+412	Industrial_and_Scientific_5	POS	5.0	Exactly as described and arrived on-time.  Takes about two minutes to install a grommet into anything reasonable.  All the parts seem to stand up to use and the grommets hold tight.
+Great for chains, sprockets, and even to lubricate lightweight vehicle wheel axises, like mopeds, bicycles, rollerblades/skates, and skate boards.
+1073	Industrial_and_Scientific_5	POS	5.0	Works as intended.
+74	Industrial_and_Scientific_5	POS	5.0	good buy
+1584	Industrial_and_Scientific_5	POS	4.0	Great all around caulk.  I use this indoor and out and have been very please.  Has good flexibility and is easy to apply.  Also, water cleanup is the only way to go.  Can't say I'll be around in 35 years to check on it, but seems durable.
+7342	Industrial_and_Scientific_5	POS	5.0	It did a great job fixing broken insulation on some headphone cables.  Frankly, it saved me having to dump the headphones.
+8766	Industrial_and_Scientific_5	POS	4.0	These shears work well for the money, but the cuts aren't 90 degrees. The cuts are slightly beveled, which earns this cutter 4 out of 5 stars. I'm using it to cut softer wire (copper, brass, silver). I suppose a person could spend a lot more for a little better performance.
+254	Industrial_and_Scientific_5	POS	5.0	Excellent.
+8628	Industrial_and_Scientific_5	POS	4.0	Well made with solid contacts and screws.  Has a firm pull-chain without that flimsy feel.  No looseness in bulk or plug sockets.  Have purchased other items from Cooper Wiring and have never been disappointed.
+8307	Industrial_and_Scientific_5	POS	5.0	Came quickly, straight, and in a very stiff tube. If you need a single long piece this is the way to go.
+6016	Industrial_and_Scientific_5	POS	5.0	I am using it for a drain hose and it works fine. Quality tubing. Maybe a bit pricey, but happy with it.
+3058	Industrial_and_Scientific_5	POS	5.0	Great buy
+1960	Industrial_and_Scientific_5	POS	5.0	I was very pleased with the duct tape. It worked really well for my use on my torn grill cover that blew away during Sandy.
+5471	Industrial_and_Scientific_5	POS	5.0	good deal
+
+4318	Industrial_and_Scientific_5	POS	5.0	as described--fast shipping
+The outside probably fits inside the port on the saws, or close
+8704	Industrial_and_Scientific_5	POS	5.0	Beautiful Stethoscope!  The sound through the ear piece is very clear, clearer than my Littmann.  I am not currently sold on the ear piece plastic as it is a harder plastic (not hard, just harder, not as soft) than my previous stethoscope and I tend to have sensitive ears; I will have to see if the smaller ear pieces that came with it fit better.  The 'scope is weightier than my previous one, but not an uncomfortable weight; It feels substantial.  I have yet to wear it over a 12hr shift so I'm not sure if it will get uncomfortable as time goes by.  The name tag is a nice bonus to help keep your 'scope from growing legs and wandering off.  I am very happy with the lifetime parts program; I hope to not have to use it anytime soon, but to have the option without buying a new "scope is awesome!
+
+The case is made from durable soft plastic, not the brittle clear stuff that cracks easily. The dividers on the inside of the case are fixed and not removable, they are not going to fall out or come loose. I prefer this to the removable insert plastic cases.
+7507	Industrial_and_Scientific_5	POS	5.0	only used on plastic so far. The sized are accurate and works very well. Much more convenient than using multiple drills. Especially on a mill where it can be a little annoying switching drills often for different size hole needs. Good price.
+5557	Industrial_and_Scientific_5	POS	5.0	Work great Very good quality.
+4887	Industrial_and_Scientific_5	POS	4.0	Hard to say much about wire markers. These do the job very well.
+2988	Industrial_and_Scientific_5	POS	4.0	good
+5928	Industrial_and_Scientific_5	NEG	2.0	THIS PRODUCT STATES IT CAN BE USED ON RV'S AND SOME APPLIANCES.  WELL IF YOU READ ALL OF THE INFORMATION (WHICH UNFORTUNATELY IS NOT ON AMAZON) THEN YOU CAN SEE IT ACTUALLY IS ONLY FOR RV'S.
+
+6899	Industrial_and_Scientific_5	POS	5.0	Quite small in size but an awesome selection of colors, including clear.
+Good flexible leads, I would recommend as an upgrade if you're tired of fussing with the rigid ones that come with cheaper meters.
+3177	Industrial_and_Scientific_5	POS	5.0	Used On A Totally Bothersome Dripping Kitchen Sink Ounce ! Cleaning And Drying All Those Sink Trap Parts Was The Longest And Hardest Part ! After A Bead Of This Magic Goodie Around Every Part ! Curing For A Day Or Two ! That Wet Catch Pan Dried Out ! Then Got Dusty ! Not A Drop Ever Again ! For 20+ Years ! Thanks Again Amazon ! Ounce Sealed A Rattly Rain Drippy Window ! After Carefully Cleaning ! Then A Healthy Bead Of This Awesome Goodie ! Closed The Window ! Let Set ! Never Again A Rattle Or Water On The Floor ! Closed Forever ! Use On Anything ? White Might Be Better For Bathroom, Kitchen Counter Tops, Or High Visibility !
+Second, clean the surface thoroughly with acetone.  Do not use alcohol.
+1738	Industrial_and_Scientific_5	POS	5.0	What can I say, this stuff really works
+5480	Industrial_and_Scientific_5	POS	4.0	General Hydroponics pH Test Kit - 1 Oz  works well for daily pH testing and I have always found General Hydro to be a reliable manufacturer of goods.
+
+How to Do the Saliva pH Test
+549	Industrial_and_Scientific_5	POS	4.0	decent quality but they wear out too quickly for me.  Maybe I'm just bearing down too hard but I wish they were a bit more sturdy.
+
+
+1984	Industrial_and_Scientific_5	POS	5.0	If you have a clamp on amp meter, you know you can only put it over one wire or it doesn't work.  This plugs into the wall, you plug the item you are testing into this, and then you can check draw.  Too easy.  It has a 1x and a 10x opening.  The 10x is great for low draw stuff.  If your clamp meter didn't come with one of these, get this one.
+5187	Industrial_and_Scientific_5	POS	5.0	These are very high quality, made in the U.S.A., heavy duty cans and well worth the added cost over a plastic can.  I have several type 1 and type 2 red (for gas) and yellow (for diesel) cans and will never buy another plastic fuel can.  Since 2009, the federal government has mandated that all plastic fuel cans incorporate a pouring mechanism that spills fuel down the side of your car and onto your shoes.  These metal cans are somehow exempt from the mandatory fuel spilling requirements. The type 1 cans are good for filling from the top (like a tractor or generator).  For filling from the side (like an automobile) I would recommend the type 2 cans with a nozzle.  You will love these cans!
+6318	Industrial_and_Scientific_5	POS	5.0	Performs as advertised. Quick shipping
+packaged in tube.
+4600	Industrial_and_Scientific_5	POS	5.0	I bought this to replace the old bulb in my ~10 year old 4xD Maglite.  FIts perfectly.  Brighter than the old bulb on full batteries.  The adjustable beam pattern is different, obviously, but not bad.
+3.  It performs -- on carpets and on hard wood floors.
+Doesn't hold up in moderately high temperatures
+9184	Industrial_and_Scientific_5	POS	5.0	These are amazing. I'll never use wire nuts again. I do a lot of home improvement and I was sold the first time I used them. These are nearly foolproof and have great specs.
+2217	Industrial_and_Scientific_5	POS	5.0	great full use glue
+8641	Industrial_and_Scientific_5	POS	4.0	work ok and did the job
+781	Industrial_and_Scientific_5	POS	4.0	good assortment
+7110	Industrial_and_Scientific_5	POS	5.0	works for my projects
+6408	Industrial_and_Scientific_5	POS	5.0	works great!
+7484	Industrial_and_Scientific_5	POS	5.0	it work great just what I needed to drill some holes in alum ducking fast delivery and pricing was good as well will buy again.
+This tape is excellent. I've had no problems with it. None at all. It'll secure almost any box and it's good and strong. We've been doing this for over four years now and we've never had any feedback that our packages arrived in bad shape or were split open. This is an excellent product and the six pack suits my needs well.
+5017	Industrial_and_Scientific_5	POS	5.0	Works well.
+
+We the next morning I came back out to take the stuff off and try some other brand, but it was sticking so good now I just left it on as I was tearing the material trying to get it off.
+9141	Industrial_and_Scientific_5	POS	5.0	Just be sure you get the correct model; otherwise, you can't go wrong with this one.  Nothing more to say.
+This can result in a start over -cuz, not all paths allow back steps.
+1871	Industrial_and_Scientific_5	POS	5.0	Great product. Screws are strong and hold the joint together well. Use in hard wood maple and oak no problem.
+The duct tape part, well, it claims to last 6x as long as traditional duct tape (the package says "based on accelerated aging tests"). I don't verify the factor of six, but the tape does seem to hold up pretty well.
+3308	Industrial_and_Scientific_5	POS	5.0	Good for very small wires
+3157	Industrial_and_Scientific_5	POS	4.0	Always a good product.
+Goop is great for sealing small leaks (including garden hose connections, etc.).  However, you have to turn off the water, and the connections must be absolutely dry.  Moreover, it takes several days for Goop to dry to reasonable strength.  If you turn on the pressure before then you will make a water balloon.  It's better to wait a week.  Moreover, it may take several applications to get a thick enough layer of Goop to hold against normal household pressure--so a sink, toilet, etc. may be out-of-commission for at least three days waiting for the Goop to dry.
+
+8180	Industrial_and_Scientific_5	POS	4.0	Terrific way to get solid stock metal. Just got a hobby lathe and this material was perfect for some test / learning cuts.
+751	Industrial_and_Scientific_5	POS	4.0	What can I say? It's a toggle switch... and it works! ;-)
+My husband still has Irwin bits that have lasted him for years. He works in the trades and relies on quality tools and equipment and Irwin has always performed at the highest levels. While it remains to be seen if these will stand the test of time some of his original bits have, they seem to have the same quality about them as the others.
+9599	Industrial_and_Scientific_5	POS	4.0	work great as always.
+When the bristles break off, they don't have the same kind of energy or tension so it's lower velocity. Much less of a need for safety glasses. This is not for use on softer materials like wood, as it will gum up the bristles. After seeing how well this worked in the field, I promptly purchased a full set.
+5476	Industrial_and_Scientific_5	POS	5.0	does what it is supposed to.
+PLUMBING
+8822	Industrial_and_Scientific_5	POS	5.0	This was my first time ordering any sort of polycarbonate material, so I did a bit of research first.  I ordered them to nail into the door and wall where my dog jumps up and (previously) scratched the wood and paint.  They're thin enough to where the edges don't catch her paw pads/nails but they're thick enough to protect the wood and paint from her nails.  The clear is great, though shiny.  I would definitely recommend these sheets!
+
+7047	Industrial_and_Scientific_5	POS	5.0	Perfect for making your sawyer water filter into a gravity feed filter.  Get the 1/4"I.d 3/8o.d. size.  Works great with the sawyer adapters and most Camel backs too.  This tubing is very flexible and doesn't kink or resist uncoiling after being stored.  Will work much better than vinyl in cold temps.
+4386	Industrial_and_Scientific_5	POS	5.0	This stuff sure beats the crap out of silicone. Much easier to use and I love the fact that I can add more to an already cured bead when I miss a spot, unlike silicone!
+2874	Industrial_and_Scientific_5	NEG	2.0	I was hoping for more but these leads are reminiscent of those sold by bargain electronics houses in the 60s and 70s.  The wire is of a very light gauge which has more meaning than just current carrying capacity.  They do not stand up to flexing and will break after a short period of use.  I became curious about how the lead wires were bonded to the clips.  I pulled off a few covers and couldn't see how this was done.  finally I saw the end of a copper wire sticking out of the crimp next to where the insulation went in.  I subjected one to destructive analysis and found that after the end of the wire had been stripped the copper wire had been bent back along the insulation and the clip was crimped on it.  Without being soldered the electrical connection won't be good for long.  Wear from bending will gradually soften the insulation and the force that holds the wire and clip in contact will weaken resulting in an a high resistance connection.  Also the crimping was not uniform from one clip to another, some of them being just barely holding.  This indicates a primitive manufacturing jig or maybe they were crimped by hand using pliers.
+Oh, and after this afternoon's heavy rain, the inside of the shed is dry.
+8841	Industrial_and_Scientific_5	POS	4.0	Great product.  Approx 3/8 inch shy of 12 inches, which I needed, thus minus 1 star.  Great shipping..very fast.  I would buy again also, as the price  was right.
+
+
+7488	Industrial_and_Scientific_5	POS	4.0	Pretty decent for the cost. No issues with it.
+The 20gal size is also pretty perfect, any larger would become very cumbersome to empty. You could line it with a bag but you'll have to weigh the bag down with something to prevent it from getting sucked up.
+9104	Industrial_and_Scientific_5	POS	5.0	It's WD-40, with a nozzle, No more losing the straw, or leaving it loose
+4690	Industrial_and_Scientific_5	POS	5.0	Great product, great price!
+1427	Industrial_and_Scientific_5	POS	5.0	I always use this tape for my packaging because the material used is tough. Very good quality
+The threads on one of the nuts, securing the arm to the shaft, stripped on first use.  I was unable to make a single measurement.  As I had not used this device before I was slowly creeping up on tightening the hand turn so as not to over torque.  The threads stripped before I could get the arm to stay in place.
+9341	Industrial_and_Scientific_5	POS	5.0	Years Messing With Nuts ! These Appear More Than Adequate ! Show Nuts Can Cost More ! Whole Box Can Be Less Than One Show Nut ! A NASA Nut ? Or Military ? Sky's The Limit ! Endlessly No Limit ! Seeking That Perfect Nut ! Drive Them Crazy ! Cost Over Runs$$$$$ ? Like These Nuts ! Awesome Price ! Different Sizes ! Thanks Amazon ! What's Not To Like ?
+9121	Industrial_and_Scientific_5	POS	5.0	Fantastic! Exactly what we needed! Quickly shipped, as described. Will buy again!
+5657	Industrial_and_Scientific_5	POS	5.0	This is the ideal product for those who want a perminant fix for lubrication problems.  The dispenser makes it easy to reach even the smallest crevas.
+9827	Industrial_and_Scientific_5	POS	5.0	works as expected
+2675	Industrial_and_Scientific_5	POS	5.0	Good stuff.
+
+4331	Industrial_and_Scientific_5	POS	4.0	A good solid microwave. Not much to be said for a modern commodity item such as this. The controls are well laid out and the physical Start button is a nice touch as compared to the rest of the buttons which are flabby membrane switches. Setting power is not as convenient with some units as you must press to subtract power in 10% increments from 100. Thus, getting to 30% takes 7 pushes. I seem to be getting less overflow on heating so it suggests the power application is smoother than the 8 yo Panasonic we replaced. Door is fine, door opening switch is fine. All seems to be well.
+7278	Industrial_and_Scientific_5	POS	5.0	I am gonna use this for a subwoofer box. It seems like it will work just fine! nice and strong, but it only measures 11 3/4 inches not 12x12"
+5031	Industrial_and_Scientific_5	POS	5.0	These are great lil' discs for cutting metal. I've used them for years in my trade (Pipefitter/Welder). Please be careful to wear your protective gear while using these though...gloves, face shield.....etc. They will do some damage to you if they were to come apart. I would hope that anyone that buys these  will already be aware of the hazards. Beside that, these discs work great for what they are designed for.
+18" 0.6mG
+The second advantage of brass is that it is relatively corrosion resistant - it will eventually darken but never rust.
+-- wiredweird
+Package states 1 roll = 10 feet. 1/2" wide. 9/16" thick.  5 year warranty.
+5641	Industrial_and_Scientific_5	POS	5.0	I have used this for both medical and non-medical useses.  The adhesive is strong enough to hold a bandage on the skin and not be a problem when the tape is removed.
+what can i say, it does what it says
+5 stars for the nails and Tool King, as well as the Hitachi NT50AE2, but that's another review... ;)
+4257	Industrial_and_Scientific_5	POS	5.0	Great deal
+124	Industrial_and_Scientific_5	POS	5.0	Seems to be first quality. Can't beat the price and free shipping!
+Overall Length: 2-7/8
+2212	Industrial_and_Scientific_5	POS	5.0	works as advertised
+5 stars!  Highly trusted!
+4383	Industrial_and_Scientific_5	POS	5.0	works great
+5912	Industrial_and_Scientific_5	POS	4.0	Pull out my post with little effort - great product.
+9004	Industrial_and_Scientific_5	POS	5.0	They work
+
+this is thicker than the Super 33, which I'm also very happy with it, this Super 88 is probably overkill for what I use it for in my car
+5516	Industrial_and_Scientific_5	POS	5.0	Good deal and fast shipping
+9305	Industrial_and_Scientific_5	POS	5.0	good price
+6583	Industrial_and_Scientific_5	POS	5.0	The product arrived in excellent condition & works great.
+
+3585	Industrial_and_Scientific_5	POS	5.0	We use these containers on the farm for soaking hoofs or paws in various solutions.  We also will occasionally collect urine for dipstick analysis.  Sometimes, you simply don't need sterile containers, and these are inexpensive and very useful.  They also store cotton balls with alcohol for homemade alcohol swabs quite well.
+7252	Industrial_and_Scientific_5	POS	5.0	Bought for a toy, but it could be used for serious knee tapping, it seems to be good quality and works well
+7096	Industrial_and_Scientific_5	POS	4.0	excellent product, thank you very much
+915	Industrial_and_Scientific_5	POS	5.0	IThe price is right for this item.  It is holding up great.  I know that I will be ordering more of these.
+
+6" 50mG
+6252	Industrial_and_Scientific_5	POS	5.0	Beauty!
+1772	Industrial_and_Scientific_5	POS	4.0	One of the biggest issues with 3D printing, outside of printer reliability, software stability, and finding the right combination of speed and extrusion rate is build volume.  I have a Makerbot 5th Generation and as LARGE as the machine appears to be, the total build volume is probably about 1/5 the machine's total INTERNAL bulkiness.  DIY printers are usually not much larger, unless you are a SERIOUS builder.
+The rod comes rough-cut at both ends. I simply touched it up with a Dremmel tool and it's ready to go. The other benefit of a brass rod is that it can be used to tap parts without marking them, if done carefully. This is a good all-purpose tool helper to keep around.
+2434	Industrial_and_Scientific_5	NEG	2.0	The jack only has 4.75" of throw. This is the distance it will actually lift something. The length of the piston fully extended.  It also has a 2.25" screw out extension that will help you get the most out of the limited throw, but will not actually lift anything. If your sidewall is more than 5" high and you have a complete flat this little fellow will not raise your axle enough to get the new wheel and tire on. This jack will be fine if you are running 30 series tires but for anything taller I'd look elsewhere.
+7043	Industrial_and_Scientific_5	POS	5.0	Quality as expected.
+4208	Industrial_and_Scientific_5	POS	5.0	great for resin mixing
+5854	Industrial_and_Scientific_5	NEG	1.0	This tape sucks when compared to regular duck type. I would not buy it again. Regular duck tape is cheaper too!
+[Update: At the time I posted this review, I hadn't yet removed any of the adhesive strips from the walls. When I did, the adhesive pulled much of the paint off. So be warned that this is very strong adhesive; it's not wall-friendly like the 3M Command products. You'll have to repaint your walls after using these strips on them.]
+94	Industrial_and_Scientific_5	POS	4.0	Replacement for an old wheel.  Haven't used it yet.  Looks like the old one (most all new products are shadows of their former selves), so it's probably okay.
+1144	Industrial_and_Scientific_5	POS	5.0	It's velcro, what more can I say
+638	Industrial_and_Scientific_5	POS	5.0	It's the best tape money can buy!
+128	Industrial_and_Scientific_5	POS	5.0	It's holding up well outdoors.
+6939	Industrial_and_Scientific_5	NEG	1.0	This stuff sticks all into the threads and gets torn up into tons of little pieces, so if you ever unscrew the fittings you applied it to, it's nearly impossible to remove properly.  When you then screw things back together, perhaps with new tape on the male end which is easier to clean, the tiny pieces all get pushed out of the much harder to clear female end and foul the gas line, potentially damaging whatever appliances you have connected or clogging a filter at best.  I had a propane distribution arrangement constructed of several T's and such, and when I needed to remove one fitting for a change, this fact forced me to deconstruct the entire arrangement so that I could effectively get all the little bits and pieces out of the fittings.  What a pain!  I wasn't about to do that again, so this hit the trash and I picked up some liquid PTFE thread seal, which works MUCH better.  Not only do I not worry about contaminating the gas line now, but the liquid sealant helps lubricate the fittings making it possible/easier to tighten them down further.  Search YouTube for a comparison of PTFE tape versus liquid to see others in agreement before you buy this!
+BROOKLYN, NY, 11220
+* Complete and utter lack of USB power supply connector for my phone, wifi connectivity for remote monitoring, or built in coffee holders.. Sheesh!
+4526	Industrial_and_Scientific_5	POS	5.0	I am using these with a Freeman PFBC940 4-in-1 Mini Flooring Nailer and they work perfectly.  No issues no miss-fires and no jams.  Not sure if this is because of the nailer or the staples themselves, either way these do the job they are intended for and hold very well.  The nails are bonded well to each other and don't easily fall apart.
+327	Industrial_and_Scientific_5	POS	5.0	Works great. It's a perfect fit for my 6 gallon shop vac. The larger diameter increases suction power compared to the 1 1/4" diameter hose, and I can suck up bigger things without worrying about it getting plugged all the time.
+2912	Industrial_and_Scientific_5	NEG	2.0	Wires are too stiff. Wire needs to be much more flexable. More strands of smaller wire size would do the job.
+5732	Industrial_and_Scientific_5	POS	5.0	A really awesome product that does exactly what it says it will do when you follow the directions. Yes, it is necessary to clean the surfaces that this will be placed on, but once done, it sticks super well and is doing a freaking great job of keeping out the -0F cold air that we've been receiving as a gift from the polar vortex.
+Rockwell Hardness B50
+
+
+
+8106	Industrial_and_Scientific_5	POS	4.0	Nicely machined.  Four stars only because they put a huge upc sticker on the end that takes forever to get off.
+2540	Industrial_and_Scientific_5	POS	4.0	I bought the larger one and it holds quite a bit of water!  I use it for everything from rinsing my filter material, moving fish, water changes for my betta, storing nets/food... these are very versatile.  My only question is, for such a simple piece of plastic, why is it so expensive?
+1212	Industrial_and_Scientific_5	POS	4.0	Good quality sound insulation - easy to install.
+It's really sharp looking. We get all kinds of questions and compliments. It really looks like a retro cruiser style street rod. We got the pink but there is enough chrome and black on it to really look cool (from a dad's point of view). Real black leather tassels even!
+This bit also kept its edge very well. I highly recommend this product.
+Might work better in other metals??
+
+2327	Industrial_and_Scientific_5	POS	4.0	I works as advertised although I did tumble my cases a second time to remove the residue after re-sizing.
+1962	Industrial_and_Scientific_5	POS	4.0	This review is from: Scotch Heavy Duty All-Weather Duct Tape, 1.88-Inch by 45-Yard (Tools & Home Improvement)
+
+Slight vinegar smell before it cures.
+435	Industrial_and_Scientific_5	POS	4.0	Work as they should.
+2009	Industrial_and_Scientific_5	POS	5.0	My leads appear to be genuine Fluke leads. Good flexibility and excellent insulation. I have no complaints.
+
+2768	Industrial_and_Scientific_5	POS	5.0	Good stuff.
+
+5062	Industrial_and_Scientific_5	POS	5.0	Fit the 1/2" NPT thread on my RV water tank just as needed & the 5/8" ID hose slipped right on with minimal force.  A simple hose clamp & I was good to go!
+2794	Industrial_and_Scientific_5	POS	5.0	works
+829	Industrial_and_Scientific_5	POS	5.0	I keep it indoors and can't smell it on a hot day, what more do you need?
+3866	Industrial_and_Scientific_5	POS	4.0	Works well
+Two of the four bits have shanks formed to fit 1/4 hex drivers. The amazon product photo does not show these newer driver style shanks (at the time of this review).
+2672	Industrial_and_Scientific_5	POS	5.0	Does what it needs to do.  Have used this one tube on three different LARGE CPUs, and there is still some left.
+Oh, when I first got it, it didn't work.  The first troubleshooting step was successful, and replacing the coin battery fixed it fine.  I thought about marking it down a star for coming with a bad battery, but that seems petty.  It works great, so it gets 5 stars.
+783	Industrial_and_Scientific_5	POS	5.0	Good assortment of terminals.
+
+3' 1.9mG
+2223	Industrial_and_Scientific_5	POS	5.0	This glue is amazing but has its limits. it expands when it dries, which is a positive and a negative, depending on what's being glued. Use it strategically and sparingly.
+At first there is a very strong chemical smell but after a while, there is no smell left anymore.
+6632	Industrial_and_Scientific_5	POS	5.0	Don't waste your money and time on all the pretenders, get the best penetrating oil that works, pure and simple.
+4065	Industrial_and_Scientific_5	POS	4.0	Half turns into boring old lead in 4.47 billion years, but I guess I can live with that.
+
+4) The fumes are strong and toxic.  Allow glued items to dry in a well-ventilated area (ideally out-of-door) for several days.  When doing alot of gluing, I work in my carport with a large utility fan blowing the fumes away---and still usually get a nasty headache.  It is best to use gloves when working with Goop.
+1340	Industrial_and_Scientific_5	POS	4.0	This sturdy dolly makes moving bulky cans easy. Fully assembled, it moves smoothly. We have been using it for yard/greenhouse clean up and transporting huge bags of feed to the kennels and barn. It is easy to steer and seems durable. Commercial grade, it is designed for heavy use. so far we are satisfied with its performance.
+9146	Industrial_and_Scientific_5	POS	4.0	This does exactly what it should and works great. I only wish it had a boil over chart too, then it would be a 5 star item.
+3596	Industrial_and_Scientific_5	POS	4.0	This is by far the best packing tape I seen in a while. The wife was buying the cheep Chinese junk from Wally world where you would end up tossing half the roll do to wast.
+7297	Industrial_and_Scientific_5	POS	5.0	This is the first time I ever tried using this product.  It definitely will not be the last time I use it.  It makes for a very professional looking finished project.
+9843	Industrial_and_Scientific_5	POS	5.0	Used this to split the CO2 line in my Keezer, as I needed 5 outputs on my distribution block and only have 4 to work with.  The T ran true to size and the CO2 lines fit on nicely.  I didn't notice any excessively sharp edges like another reviewer...this is exactly as described and what I wanted.
+1414	Industrial_and_Scientific_5	POS	4.0	Exactly as expected.
+6412	Industrial_and_Scientific_5	POS	5.0	very accurate and easy to read.
+1599	Industrial_and_Scientific_5	POS	4.0	OK,  but  go  with  Loctite  Products!
+6615	Industrial_and_Scientific_5	POS	5.0	I only wish I started using this stuff years ago
+3116	Industrial_and_Scientific_5	POS	5.0	awesome meter. I calibrated it first, as I do not trust any meters 'out of the box.' Tested distilled water, spring, tap and filtered. It was incredible how accurate it was. Highly recommended!!
+9669	Industrial_and_Scientific_5	POS	5.0	as described...
+-Waterproof
+- when it comes to cutting your pipe, right-angled and clean cuts are the best; if you can use a chop saw for this, then do it, as you'll get perfect cuts every time; now, you can certainly cut your pipe with a hand saw, but it's harder to get perfect cuts this way
+4990	Industrial_and_Scientific_5	POS	5.0	good value
+
+2512	Industrial_and_Scientific_5	POS	5.0	Beats brushing your teeth manually!
+5978	Industrial_and_Scientific_5	POS	5.0	I had never heard of backer rod.  When we had to do a lot of caulking, I found out about it.  HUGE home run.  I used to just keep filling cracks with caulk til they "filled up".  Now I ram this stuff in first, and then caulk over it.  Saves super big on caulk costs.  Easy to use.  Just pull off what you need and ram it into the crack with a scraper.  I got three sizes - kind of a small, medium, and large for different sized cracks.
+For that reason I use basically HYDRION pH test tape and now and then pH Test Stripes as a second reference.
+1459	Industrial_and_Scientific_5	POS	5.0	Standard size AGD type 2 indicator is very accurate. This model has hardened gears inside and 1" travel with removable tip. #4-48 thread for accessories. From the at rest position to "zero" it out is about 15 thousands so it will retain accurate measurements and still retain the shock proof mechanism. Very smooth movement. You can feel the quality. Highly recommended.
+1463	Industrial_and_Scientific_5	POS	5.0	Although I haven't needed to use it yet, the kit arrived quickly, has the variety of glues that I wanted, and should make it easy for me to get comfortable picking which version works best for me.
+It would have been nice to have had a variety of sizes, but the hole punch and platform would need to be separate units for each grommet size.
+
+2227	Industrial_and_Scientific_5	POS	5.0	This stiff does stick really good. I used it to keep my handle bars from slipping off as they've gotten loose with age, because it expands as it dries.
+
+2092	Industrial_and_Scientific_5	POS	5.0	great glue
+398	Industrial_and_Scientific_5	POS	5.0	This Irwin 10225 Unibit product is high quality set of step drills, made in the USA, that comes in a substantially padded protective case. While it does cost significantly more than competing off-shore bits it is also significantly superior in all respects.
+1846	Industrial_and_Scientific_5	POS	5.0	Does what it was designed to do!
+
+9971	Industrial_and_Scientific_5	POS	5.0	I slice it lengthwise I use it for edging on tin for old-timey metal toys I make. It solders great.
+Easy to operate - just turn it in and squeeze the trigger to release water/cleaning solution.
+9711	Industrial_and_Scientific_5	NEG	1.0	A lot of glue in there
+When you need a strong rigid workable (e.g. sandable and/or paintable surface) adhesive, particularly for use on metal or hard plastic, epoxy is usually the best choice.  Most epoxies dry with little running or shrinkage, and so are good for filling gaps.  The major drawback to epoxies is that they consist of two parts (resin and hardener) which must be mixed in small batches, and then applied with your own applicator (e.g., a toothpick or popsicle stick). Some are packaged in a dual-syringe--but that is not an adequate solution, because the components must still be manually mixed in order harden to maximum strength.
+8147	Industrial_and_Scientific_5	POS	5.0	Great source for buying uncommon diameters and lengths. Great idea for an online business and a convenience for the public.
+7771	Industrial_and_Scientific_5	POS	5.0	This was packaged well and just as expected.
+2934	Industrial_and_Scientific_5	POS	5.0	perfect
+
+2.) Around the houses, I use it to reinforce things like cardboard boxes I've overloaded or plastic bags that have been overloaded, I reinforce with Gorilla Tape...great hold. Easily holds up for years.
+725	Industrial_and_Scientific_5	POS	5.0	Just perfect.
+3505	Industrial_and_Scientific_5	POS	5.0	They are good quality and the right size to carry in my uniform pocket.  Comfortable to use and sharp enough to cut bandage material.
+1462	Industrial_and_Scientific_5	POS	4.0	Nice package.  Not sure what Ill use the case for in the future. I ended up needing the debonder just a few days after this arrived... would have been pretty gnarly situation without it. Made me feel like an adult being prepared.
+
+6176	Industrial_and_Scientific_5	POS	5.0	It is what it says. I'm very happy with the terminals.
+* Used a Makita cordless 18V drill I bought on sale not long ago, set to the "1" setting - low speed, high torque.
+7834	Industrial_and_Scientific_5	POS	5.0	Good product.
+8890	Industrial_and_Scientific_5	NEG	2.0	It arrived undersized. Ordered 12" square, it arrived 11-3/4" square
+4462	Industrial_and_Scientific_5	POS	5.0	I bought this to replace the old check valve on my sump system. It really is as quiet as others claim it is and I also bought the submersible motor that a previous reviewer said they bought with theirs and I'm very happy.
+and at:
+2795	Industrial_and_Scientific_5	POS	5.0	quality compund that is easily applied. more than enough for a few CPU's, remember you only need a little bit.
+8161	Industrial_and_Scientific_5	POS	5.0	five starts
+
+7571	Industrial_and_Scientific_5	POS	5.0	I have used this tool very day and has not let me down. other cutters plug and will need a screw driver to remove it. That type can also cut you when cleaning out the "plug". This tool works fast and seems to stay very sharp. I store it in a empty prescription plastic bottle with the cap and keeps it nice. Does not skip to start and cuts a clean hole in metal or plastic boxes nicely. Must have to run conduit in boxes for the smaller holes. Of coarse you will need a knock out tool for larger holes (Like 1 1/2" inches or larger) but this tool works very well for smaller.
+645	Industrial_and_Scientific_5	POS	5.0	you would think Tape is Tape. Well that is not correct.
+953	Industrial_and_Scientific_5	POS	5.0	Nice quality.
+
+8115	Industrial_and_Scientific_5	POS	5.0	Shipping was fast, packaging was terrific: thick cardboard tube.
+One thing to keep in mind is that these tips are only rated for 60VDC.  For typical uses this is plenty, but always keep in mind what the voltage you are measuring could be.
+1301	Industrial_and_Scientific_5	POS	5.0	Great!!!
+9302	Industrial_and_Scientific_5	POS	5.0	For the price I paid this is a nice kit a different variety items inside you never know when you need a certain size as a replacement one the time comes.
+3934	Industrial_and_Scientific_5	POS	5.0	Great product
+6751	Industrial_and_Scientific_5	POS	5.0	Buying this beats paying $100 at the store.  All I needed was the handle and that's all I paid for.
+3246	Industrial_and_Scientific_5	POS	5.0	Works like it should.
+
+4266	Industrial_and_Scientific_5	POS	5.0	Our, and our dentist's, recommended paste. Always go with what works.
+6215	Industrial_and_Scientific_5	POS	5.0	I'm sure it works great. Just need to find out where I put it.
+Very Happy with this product.
+
+
+I did not purchase the cheapest magnetic base with dial indicator for the reason that I did not want one that would break.  I did not go far enough up in quality.
+7293	Industrial_and_Scientific_5	POS	5.0	Rodents got into the walls and chewed the insulation on some older power cables. The copper was still sound, but the insulation was gone for 3-4 inches in several places. There was not enough room to wrap electrical tape or self-bonding silicone tape.
+- Have a helper on hand to hold it in place
+6478	Industrial_and_Scientific_5	POS	5.0	Great quality for the general workshop
+7671	Industrial_and_Scientific_5	POS	5.0	I have tried countless miracle glues.  Most of the other glues dries in the tube after the first use so it is useless after that or they give you such a teeny amount of glue in the tube.  You get 4 liquid grams in this tube which is a decent amount and should last for many applications.  This glue is a gel but a very viscous gel so it will get into all the cracks and crevices needed.  I bought this to fill in the cracks on the stem of the briar wood of my tobacco smoking pipe and it worked like a miracle.  The glue does dry to a slight white haze but I was able to carefully sand that down.  This product brings back old nostalgic memories of when I was a kid  watching the Krazy Glue commercial of the construction worker's hard-hat being glued to the metal beam.
+3434	Industrial_and_Scientific_5	POS	5.0	good
+9496	Industrial_and_Scientific_5	POS	5.0	Works great just as described!
+1188	Industrial_and_Scientific_5	POS	5.0	Just right to seal our portable air conditioner exhaust vent at the window.
+4579	Industrial_and_Scientific_5	POS	5.0	Exactly as anticipated.  Arrived quickly and worked very well.
+
+1457	Industrial_and_Scientific_5	POS	5.0	Wow. This guy costs a lot but really paid for itself. I have re-geared or rebuilt five differentials on my two Jeep Wranglers and my old Volvo 740 using this to set backlash, etc. Quality it worth expense if it saves you time and money in the end. This dial indicator did just that. I had a Harbor Freight dial indicator and magnetic base. It took inaccurate measurements. It caused me untold stress and aggravation. I purchased this and the magnetic base needed to do differential work and got things "dialed in" on the first attempt. This is a very accurate instrument. It is very well made. It is made in the USA by people who pride themselves on making some of the finest measuring devices you would ever need in your shop. Highly recommended!
+427	Industrial_and_Scientific_5	POS	4.0	excellent tool, you must sharpen it before serious use
+375	Industrial_and_Scientific_5	POS	5.0	One of the best wire wheels out there.  Here's the scoop, you can pay more for this one or you can buy cheap import junk wheels and burn through 10 of them before the DeWalt wears out.  These are the finest of wheels
+The only use for WD-40 is water displacement, and other products still do a better job. Lubrication and rust prevention don't last longer than a few days to 1 week with WD-40 AND it attracts grit and grime like a magnet, making the problem worse AND compounding the problem if all you're doing is spraying on more WD-40.
+263	Industrial_and_Scientific_5	POS	5.0	I have bought nails at the big box store and the plastic strips ALWAYS are poor quality and I get misfeeds.  These have never caused a problem.......about 5 boxes through my Hitachi so far a NO issues.......
+2458	Industrial_and_Scientific_5	POS	5.0	Do what we want.
+3611	Industrial_and_Scientific_5	POS	4.0	I love 3M products, but was very frustrated with the last rolls of package tape I bought of theirs (admittedly, at a dollar store!).  So, I shopped it on Amazon, and bought this one.  It's good stuff:  Yes, it starts easily (if it comes off my tape roller); it is very clear; it lies flat & bubble-free over address labels; it adheres well.  What's not to like?
+6704	Industrial_and_Scientific_5	POS	5.0	This is an excellent stethoscope for the money.  I highly recommend this one for general auscultation. The color is exactly as pictured.
+
+1290	Industrial_and_Scientific_5	POS	5.0	good stuff.
+4444	Industrial_and_Scientific_5	POS	5.0	This was installed right above my basement sump pump to keep the water from flowing back into out basement after the sump pump shuts itself off.  Seems to be a much better quality than similar check valves sold by HD or Lowes.
+1112	Industrial_and_Scientific_5	POS	5.0	I dug out my old HO train set for the kids to play with. The brass track were oxidized, and I did a little research on what was the best way to clean them off and get them shiny again. One website recommended these 3M sanding sponges so I got one. It's perfect. Cleaned those tracks up perfectly, they look like new and the train is running again. The sponge is soft and easy to hold. My girls helped clean the tracks and were taking turns doing it. All in all I'm very happy with this.
+
+
+3036	Industrial_and_Scientific_5	POS	5.0	Simple machine according to 2nd grade teacher.  Square is best shape, boxy like communist Russia.  I say yes to square drive screws.  You try.
+9072	Industrial_and_Scientific_5	POS	5.0	Does exactly what it is suppose to! I am really happy with it, I have been using about 2 years...
+Aaronia AG Spectran NF-1010E (10Hz-10KHz, Magnetic and Electric Fields, 5% accuracy)
+* Use clamps when possible
+386	Industrial_and_Scientific_5	POS	5.0	Tough brush for the angle grinders. Very stiff brush that can remove the most stubborn material with your 4 inch angle grinders. This is a versatile accessory and tool guys love accessories. I was removing rust from an old fire place damper and it was like Rustzilla offering a satisfying domination over the forces of corrosion and gunk. If the wife get the hubby one of these she will have total control over his will power for weeks. Maybe not.
+Would rate a fifth star but for its rather short (1-year) shelf life. One year may be a lot where you can find it easy but down here it is a 520 mile round trip drive.
+Handles: Large 8.5". Thinner one ~8.5". Put together you get 15.75"
+26	Industrial_and_Scientific_5	POS	5.0	JUST STARTED USING THIS AND SO FAR i LOVE IT. GIVES MORE FLEXIBILITY FOR CHANGING OUT GRITS ON MY SPINDLE SANDER. STICKS TO SPINDLE BETTER THAN PRE-FORMED ONES.
+2" Straight Pegboard Hooks (count of 4)
+
+5650	Industrial_and_Scientific_5	NEG	1.0	Cant hear anything and terrible construction. Save your money and buy a quality product.
+Overall GG is very useful, and there are plenty of things for which it works very well and where, say, super glue doesn't do the trick.  I don't know if it's better than wood glue for wood projects.  From what I hear it's not, but I don't always have wood glue around, so I'll use this.
+
+
+6496	Industrial_and_Scientific_5	POS	4.0	Awesome tool for my 3D modeling and printing efforts.  I've been trying to get really precise (like, down to quarter millimeter) measurements of items I'm working with, and this is easy to use and quite effective.  Hopefully the roller will hold up over time; it feels like it could get loose after a while, but it's still working fine so far and I've been using it quite frequently for a few weeks.
+
+1547	Industrial_and_Scientific_5	POS	5.0	works good
+2387	Industrial_and_Scientific_5	POS	5.0	These work great.
+
+4464	Industrial_and_Scientific_5	POS	5.0	I'm very pleased with this check value. I know that it's not a very exciting product to use (or even talk about) but it is so good it warrants a review.
+I use these on Ball jar lids to accept 1/4" drinking straws.
+7349	Industrial_and_Scientific_5	POS	5.0	pretty cool idea. love what is does
+
+7659	Industrial_and_Scientific_5	POS	5.0	Works fine
+4986	Industrial_and_Scientific_5	POS	5.0	I love the Small Parts department at Amazon.
+This tone generator pairs well with both my Fluke and Greenlee probes. It has an external switch for tone selection so when using two of them at once you can set each to provide a different tone. There is also a continuity setting which can also be used to provide talk battery. The switch that selects the tone is also the on-off switch and when you stuff this thing into a bag it is quite easy to turn it on by accident and over time the battery will drain. I find it better to switch it to continuity and make sure the clips don't touch when stored away. This toner is designed to work primarily on "dry circuits" but will work when tracking POTS lines. Digital is another matter. I find that if you try to tone a live digital circuit it may short out and no tone is generated. That all depends on what type of digital circuit it is. Other than losing one of these I have experienced no other problem with them.
+
+
+8464	Industrial_and_Scientific_5	POS	4.0	Hanging things inside the sink is an interesting idea, and this hook is very attractive and a good match for a stainless steel sink. However, it's meant to be installed before the sink itself is installed, using a backing strip to be taped on the outside of the sink. If you can squeeze under the kitchen counter and get it done, you can attach it to a sink that is already installed, but it's awkward. The magnets are strong, and it beats hanging things over the faucet to drain.
+9229	Industrial_and_Scientific_5	POS	5.0	I am only tapping PVC but it worked fine and is well made. I am well aware of Vermont American products and I trust the products the make.
+I found the quality of the the tool to be very good. Not flimsy at all. I expect years of service given normal care in handling. The tone generator has a nice lanyard to hang it by when you are attaching it to various wall boxes etc, so that you don't wind up hanging it by its leads, a nice touch that should add to longevity.  I like that it comes with a case to keep everything together since this is the sort of tool I will only use occasionally and if it is knocking about in my kit without a case I'd be sure to misplace one part or another.
+1002	Industrial_and_Scientific_5	NEG	2.0	Quality is fine, but you're really paying a large premium for variety. Better off getting a couple of different size packs of the Dewalt nails.
+769	Industrial_and_Scientific_5	POS	5.0	Just what I needed at a great price with quick delivery.  What can I say it works as intended.
+3632	Industrial_and_Scientific_5	NEG	1.0	These hoses are extremely stiff and will not lie flat.  Possibly makes them more durable but they do not lie flat making them hard to use and a trip hazard.
+
+This "Great Stuff" has been doing a good job for me.
+5163	Industrial_and_Scientific_5	POS	5.0	exactly as agreed
+2484	Industrial_and_Scientific_5	POS	5.0	I use this to do spot water quality tests on the water coming from the private well that feeds my home. For the most part, it's easy to use and is as accurate as any tests I've tried. TDS, Salinity, ph and conductivity are easily determined from a single test sample in under five minutes. Of course, it would be ideal is the unit could also test for additional contaminants (iron, nitrates, chlorine, etc), but for what it offers, this is a great probe that gives you a quick understanding of whether you've had any changes to your water quality.
+2624	Industrial_and_Scientific_5	POS	5.0	great product,  sturdy and solid gasket.  worth every penny
+3804	Industrial_and_Scientific_5	POS	5.0	I use it to hold the handles on the hidden tang of the knives I make. It is more viscous then most liquid epoxies so it stick to both sides of the tang allowing me to position it between the sides of the handle without drips or runs. It is still liquid enough to flow to fill the voids.
+3269	Industrial_and_Scientific_5	POS	5.0	Does a good job in stopping the squeaky sound. Only draw back is the driver bit that you have to use to screw these nails into the floor. It becomes dull so, so quick and you have to keep buying the driver bit to use this.
+2258	Industrial_and_Scientific_5	POS	5.0	Takes care of life's little mishaps. It is important to remember that the glue expands and handle accordingly.
+742	Industrial_and_Scientific_5	POS	5.0	I bought a few of these to have as backups. Some of our farm equipment uses DPDT switches and one on our hay baler went out. I searched this whole town for a DPDT switch and found none. The local farm equipment dealer is the only place that had them and they were $50! each. It's just a freakin switch. So, as is becoming more and more common in my life, Amazon to the rescue.
+2474	Industrial_and_Scientific_5	POS	5.0	While its not the greatest quality, I find for the price point Torin jacks never disappoint. Good quality, good prices.
+Based upon the other reviews and after checking consumer reports, I bought an extended warranty.
+252	Industrial_and_Scientific_5	POS	5.0	Good product
+7139	Industrial_and_Scientific_5	POS	5.0	The right size and shape
+This allowed me to adapt my shop vac to a bench sander. Works perfectly.
+3528	Industrial_and_Scientific_5	POS	5.0	Short and sweet:  I purchased this clear caulk to seal around my bath tub and shower.  It is just the best.  Easy to use.  Did the job.
+9636	Industrial_and_Scientific_5	POS	5.0	great product
+I have been using this with Trade Associates AF44L 7 Piece Dura Block...they work great together
+Comes in hard plastic case with an extra battery.
+I've owned headless Fluke silicone leads before, but they were made in the USA unlike
+Price
+9686	Industrial_and_Scientific_5	POS	5.0	I like it
+After some water damage (ok, beer damage), I was having trouble getting my pre-Retina MacBook Pro working - even after thoroughly cleaning in alcohol. After reading a bunch of tips online, it seemed that cleaning then replacing the thermal paste on the CPU might help. I was skeptical, but it worked like a charm! Make sure to read some instructions and watch some instructions - you're obviously dealing with some sensitive equipment!
+9244	Industrial_and_Scientific_5	POS	5.0	Handy Set to have on the shelf.  I think I need to buy a metric one too.
+1775	Industrial_and_Scientific_5	POS	5.0	Good stuff and won't dry out
+1963	Industrial_and_Scientific_5	POS	5.0	I have a cover over the back of my truck.  It started to rip last year.  I used duck tape ( not this one) and it did not last long weather got to it I think. This All weather duct tape has been on there twice as long as the other stuff. No sign of it falling apart o losing its bond to the cover.
+
+6143	Industrial_and_Scientific_5	POS	4.0	good buy
+I keep a few viscosities on hand at any one time as well as accelerator and have yet to be disappointed.
+
+563	Industrial_and_Scientific_5	POS	5.0	Works well.
+9156	Industrial_and_Scientific_5	POS	5.0	These things are such a time saver.  I hate wirenuts and electrical tape, this makes doing anything (I've done outlets, switches, and ceiling fans with these so far) so much faster!
+217	Industrial_and_Scientific_5	POS	5.0	Dry wall dust will not escape these. Cleaned an entire new house after the drywall finishers left and went through four of these bags, but the inside of my shop vac showed very little evidence.
+9258	Industrial_and_Scientific_5	POS	5.0	Good seletion and good price
+4596	Industrial_and_Scientific_5	POS	5.0	ordered the wrong size,  product looks good though.
+2904	Industrial_and_Scientific_5	POS	5.0	and they work like you would expect them to
+4974	Industrial_and_Scientific_5	POS	5.0	good quality pvc Ts, gets the job done.
+Water (H2O) ionizes into hydrogen (H+) and hydroxide (OH-) ions. When these ions are in equal proportions, the pH is a neutral 7. When there are more H+ ions than OH- ions then the water is said to be acid. If OH- ions outnumber the H+ ions then the water is alkaline. The pH scale goes from 0 to 14 and is logarithmic, which means that each step is ten times the previous. In other words, a pH of 4.5 is 10 times more acid than 5.5, 100 times more acid than 6.5 and 1,000 times more acid than 7.5.
+7731	Industrial_and_Scientific_5	POS	4.0	Wow, is this tape wide! I think you could repair an F-16 after a combat sortie.
+7391	Industrial_and_Scientific_5	POS	4.0	This stuff is exactly as described.  Works great.  Tough waterproof seal.
+
+4808	Industrial_and_Scientific_5	POS	5.0	Nice quality hardware.
+Bottles came well-packaged, with each dropper tip taped with a piece of scotch tape folded over itself as extra protection.
+3264	Industrial_and_Scientific_5	POS	4.0	good
+6492	Industrial_and_Scientific_5	POS	5.0	It works. and good. I don't know about its accuracy for high precision works for NASA rockets. For home use, its more than enough.
+
+3985	Industrial_and_Scientific_5	POS	5.0	This is a life saver. THis is some strong stuff. I used this to hold together my car front bumper. It seperated a when i was hit in the parking lot. If you use this properly, it provides a strong bond. It is very handy to have around
+
+7706	Industrial_and_Scientific_5	POS	5.0	These casters are very good. They worked out very well for my project.
+890	Industrial_and_Scientific_5	POS	5.0	Great for putting any heavy object on wheels.  I built a 16X32 plywood platform, and use it to move heavy objects, or multiple objects in a single trip.
+3123	Industrial_and_Scientific_5	POS	4.0	I purchased this meter primarily so I could compare it to the results of my HM Digital DM-1 dual in-line test unit I have plugged in before and after my RO system.
+****
+9579	Industrial_and_Scientific_5	POS	5.0	If you're into trouble-shooting automotive electrical/electronic systems, these are a MUST.  Extremely handy to check continuity.  You can insert these probes from the back of connectors to verify circuit integrity.
+I'm happy with it, and I'll keep buying it.  It's currently $5 here on Amazon and I don't mind at all that it's an "add-on item" because this mouthwash is $7.50 in my local drugstore.  Nice bit of savings here.
+
+8148	Industrial_and_Scientific_5	POS	4.0	Nice quality rods, arrived straight and clean.
+9038	Industrial_and_Scientific_5	POS	5.0	Arrived on time works as expected.
+
+8290	Industrial_and_Scientific_5	POS	5.0	Strong and straight.  Just what I needed to construct a house-mounted antenna.  Easy to cut and thread.
+5127	Industrial_and_Scientific_5	POS	5.0	A great value, I was concerned about how well they would do at such a low price but I have them installed all over my shop and outside and they work just fine.
+1277	Industrial_and_Scientific_5	POS	5.0	A few years ago I purchased the Hoover Max Extract Dual V All Terrain Carpet Washer here on Amazon, and have been very happy with it.
+works fine and comfortable to use.
+1835	Industrial_and_Scientific_5	POS	5.0	Love love love my kreg stuff!
+9526	Industrial_and_Scientific_5	POS	5.0	The bushings work fine in a grinding wheel I had on hand. The sad thing is the price is excessive for a couple pieces of nylon tubing
+0	Industrial_and_Scientific_5	POS	5.0	This worked really well for what I used it for. So for my purposes it is getting full marks. This is an all around great, durable, and afforable sandpaper.
+1041	Industrial_and_Scientific_5	POS	4.0	These are of excellent quality, but the 2 inch brads are a little long for the WEN 61720, the Bostitch brand fit the gun better, in order to use them on my WEN I simplt ground down the tips a little so they would fit.
+3429	Industrial_and_Scientific_5	POS	5.0	Heavy duty
+2004	Industrial_and_Scientific_5	POS	5.0	Sitting in a diagnostics class my instructor was going on about a gizmo he built that seperates the lines so a clamp meter can be effictively used.  He claims he built this doo-hickey for about $25.  I thought thats great as I pulled this out of my tool bag.  It is way smaller and does not look like some mad-scientist made it in his shed.  My instructor thought it was nice then asked "what did this fancy thing set you back?"  When I told him about $12 everyone was impressed, including him.  I have used it a few times in the field and in class to complete assignments but it is way easier than disconnecting and jumping hard-wired equipment that had 2/3c wrapped in the case.  Not something I figure I'll use every day but well worth the investment.
+4969	Industrial_and_Scientific_5	POS	5.0	Good! I use it to clean my couches and this is the best buy. Actually works where other brands have not.
+9040	Industrial_and_Scientific_5	POS	5.0	I have used this brand of nails in my pneumatic nailer for years...never had a stoppage...or any other problem with them.  Highly recommended.
+
+1323	Industrial_and_Scientific_5	POS	5.0	Good Stuff, sticks well.
+6036	Industrial_and_Scientific_5	POS	5.0	Great
+9263	Industrial_and_Scientific_5	POS	5.0	The collection even had the hex and thread size I needed!!
+6427	Industrial_and_Scientific_5	POS	5.0	Works fine
+248	Industrial_and_Scientific_5	POS	5.0	I have bought nails at the big box store and the plastic strips ALWAYS are poor quality and I get misfeeds.  These have never caused a problem.......about 5 boxes through my Hitachi so far a NO issues.......
+All in all, this can is a winner and a sure-fired gift for any dad or grand-dad that has a plastic tank.
+8379	Industrial_and_Scientific_5	POS	5.0	This will work perfectly. Nice finish and seems like decent material. Not sure what more to say about it though.
+5972	Industrial_and_Scientific_5	POS	5.0	Couldn't find this size for my 7/8" wide concrete expansion joints. Worked perfectly with silkaflex SF sealant.
+I have been using this with Trade Associates AF44L 7 Piece Dura Block...they work great together
+6"  Shelf Brackets  (count of 2)
+2385	Industrial_and_Scientific_5	POS	5.0	Really like this vacuum. Great suction. Head shape and swivel very effective in cleaning close to baseboards and in tight spots. Best we've ever owned.
+
+5762	Industrial_and_Scientific_5	POS	5.0	Its Gorilla tape, what more does one need to say.
+9962	Industrial_and_Scientific_5	POS	5.0	Absolutely wonderful, out old check valve would make the loudest most horrendous thud you could possibly imagine, this one is silent, and I men silent, there's no thud or anything.  I bought two in case one every failed.  Also my plumber told me there's a code that's typically on a check valve which he didn't see on this one, he thinks if it were installed during our basement finish that the inspector (if paying attention) may not have passed it because of the code missing, however, we installed it after the basement was finished and now it's nice and quiet when the pump cuts off.
+1637	Industrial_and_Scientific_5	POS	4.0	This has been working great. Use it to measure run out and bounce in truing my spoke wheels.
+8387	Industrial_and_Scientific_5	POS	4.0	Ok
+4259	Industrial_and_Scientific_5	POS	4.0	good product
+7250	Industrial_and_Scientific_5	POS	5.0	Hammer time!
+1229	Industrial_and_Scientific_5	POS	5.0	I have bought nails at the big box store and the plastic strips ALWAYS are poor quality and I get misfeeds.  These have never caused a problem.......about 5 boxes through my Hitachi so far a NO issues.......
+68	Industrial_and_Scientific_5	POS	5.0	Our concrete driveway had dozens of cement patches (to fix concrete pops), many of which were higher than the driveway's level.  This grinding wheel, mounted on a 30-year-old 4.5" right-angle grinder, easily smoothed the patches to the surrounding level. If you grind on a windy day, you won't even need a respirator.  Great product at a reasonable price.
+When you want to make no mistake about drilling too large a hole. A regular drill bit always makes the same hole size - no need to count the steps - which can be very reassuring when drilling into a valuable workpiece.
+3698	Industrial_and_Scientific_5	NEG	2.0	Exactly as described. Fast shipping!
+9295	Industrial_and_Scientific_5	POS	5.0	Just what I needed.
+ I would like to have this store had the opportunity of international shipping and delivery cost is not for every instance of a One unit of weight
+5263	Industrial_and_Scientific_5	POS	5.0	great
+I'm a hobby plumber as you might say and I had to install a whole house water filter after my well pressure tank.  Needless to say, I had some major plumbing and re-routing of plumbing lines to do in order to install this 5 foot tall whole house filter.  I used a combination of both PEX and some copper fittings.  The big filter and the spin-down pre-filter both had male and female NPT and MPT fittings.  I was very familiar with this style of fitting and always used regular PTFE thread tape.  For whatever reason, I could not get it to completely seal up and had a pin drop leak every 10 seconds or so once the system was under pressure.
+4936	Industrial_and_Scientific_5	POS	5.0	Great quality
+9145	Industrial_and_Scientific_5	POS	5.0	Nice simple tool that works
+7395	Industrial_and_Scientific_5	POS	5.0	Very good for insulating any wires that you have put together.
+597	Industrial_and_Scientific_5	POS	5.0	Use it all over where electrical tape is needed.
+- before applying the primer and glue, find a ventilated space or use a fan to air out your workspace; this primer and glue is VERY strong smelling and you want to breath as little as possible
+
+7642	Industrial_and_Scientific_5	POS	5.0	PERFECT !!  I wish they made a larger diameter mirror and I would purchase it !!!  3" - 4" would be nice..
+
+2325	Industrial_and_Scientific_5	POS	5.0	It is good to go if you sizing match chamber brass.
+6131	Industrial_and_Scientific_5	POS	4.0	They are fine but are thinner metal so are light duty; they need to hot melt glued, etc. to stay put
+9811	Industrial_and_Scientific_5	POS	5.0	Nice product. Very satisfied.
+7427	Industrial_and_Scientific_5	POS	4.0	bought as a toy, served it's function.  she doesn't play with it much now but it was cheap and that's ok.
+5130	Industrial_and_Scientific_5	POS	5.0	This is similar to Elmer's Glue in working with it, but is a much superior product!  This holds well to smooth surfaces, is somewhat flexible and seems very strong.  One of the glues I will always have around my house.
+4675	Industrial_and_Scientific_5	POS	5.0	Excellent quality. Great price.
+4885	Industrial_and_Scientific_5	POS	4.0	This product performed well and arrived promptly. A good price, good quality, and no surprises. I'll gladly buy again if we need more.
+3933	Industrial_and_Scientific_5	POS	5.0	LIKE THE BIGGER TUBES, HAVE MORE CONTROL ON FLOW  WOULD BUY AGAIN
+
+6703	Industrial_and_Scientific_5	POS	5.0	this is just a stethoscope.  its nothing fancy.  is a good one and works well, so can't complain at all.
+8219	Industrial_and_Scientific_5	POS	5.0	Thanks
+2186	Industrial_and_Scientific_5	POS	5.0	very nice pair of Forceps! very good quality for a very small price, I didn't notice that 1 was curved! I like the way they look, work & feel on my big fingers (extra large glove size)! I can use them fine! will buy again if needed!
+799	Industrial_and_Scientific_5	POS	4.0	I agree with the reviewers that said the cutter is duller than a hoe.  I bought this to replace the grommets in my boots that were causing my laces to fray. I marked this down because after many solid whacks I barely cut one new hole in my boot as the cutter was exceptionally dull. However, after I touched up the cutter on my diamond coated grinding wheel, it cut like a hot knife through butter and I finished the 11 other holes in less time that I did the first one.  If the company who makes the cutter only took a few seconds to sharpen the cutter against a grinding wheel this would be one exceptional kit.
+2180	Industrial_and_Scientific_5	POS	4.0	I won't contest other reviews being low quality or not working, but mine work great, and the teeth line up just right to fit together.  Maybe I got lucky, but mine are great for the price paid.
+1495	Industrial_and_Scientific_5	POS	4.0	Just what I needed at a good price.  These spray bottles really work.
+7034	Industrial_and_Scientific_5	POS	5.0	This product is exactly as described, and arrived on my doorstep in a timely manner. I use this as a steam tube for a home-built scientific distilled water maker. I would like to note that when heated near a rubber stopper, the tubing turned a strange yellow color. Though that is likely the poor quality of the rubber in my stopper at fault rather than this tubing.
+8748	Industrial_and_Scientific_5	POS	5.0	I had never heard of Spax screws until I ran into a distributor at a big box hardware store stocking the shelves a few years ago.  I described my project and they picked out a screw for me.  It turned out to be perfect for the intended use and the self-drilling feature was a big benefit. I bought this variety box on Amazon and used several of a certain size, but it costs an arm and leg to buy either a small number of a certain size or a large quantity, so I ended up just buying another variety set.  That's my only complaint. If I could buy 100 of a certain size at a reasonable price I'd be happier.
+7408	Industrial_and_Scientific_5	POS	5.0	Hard to describe a product with so many possibilities. Such as for use on electrical projects  and in specific, a model railroad layout where the necessity to insulate and isolate electrical power and signal circuit is imperative. This product does the job, no other way to describe the product.
+9630	Industrial_and_Scientific_5	POS	4.0	using this as a dust collector for cyclonic vacuum  works great, should not have to empty it till late 2016
+8421	Industrial_and_Scientific_5	POS	5.0	Works really well, might use it as covering on some of my small rc planes/
+6676	Industrial_and_Scientific_5	POS	5.0	This stethoscope works perfectly and has everything you need out of a stethoscope
+3634	Industrial_and_Scientific_5	POS	5.0	Have for when Needed for camping !
+
+810	Industrial_and_Scientific_5	POS	5.0	Great
+Because these fittings are brass, (a very soft material), and meant for an air compressor, I was surprised that they didn't have better protection of the exposed pipe thread ends. Most had an ID tag-tape made of a paper-thin, (about .005) plastic material, wrapped around one end of the exposed thread. Of course, these tags aren't meant to offer any protection. Many of these fittings were packaged together loosely in a plastic bag and then shipped in a bubble wrapped envelope.
+8618	Industrial_and_Scientific_5	POS	4.0	good, decent quality assortment of dremmel/ foredom brushes. www.gunsmith.us.com
+Fabric Glue:&nbsp;<a data-hook="product-link-linked" class="a-link-normal" href="/Beacon-Fabri-Tac-Permanent-Adhesive-4-Ounce/dp/B00178MNFO/ref=cm_cr_arp_d_rvw_txt?ie=UTF8">Beacon Fabri-Tac Permanent Adhesive, 4-Ounce</a>&nbsp;works amazingly well on fabrics, saturating the surfaces enough to provide a very strong bond, but without soaking through.  Depending on the application, fabric glue can be better than sewing.  It remains very flexible, e.g., it would probably be great on leather or heavy vinyl (e.g., women's handbags, shoes, luggage, etc.)
+It's pricey, but I refuse to use that cheap junk that other companies make.  Junk just falls apart.  This stuff is top notch though.
+1250	Industrial_and_Scientific_5	POS	5.0	Great product. These allowed me to install 12' long crown molding by myself on 10' tall ceilings. I made a couple of different shop-made  attachments for them to make them more useful. FYI, the end of the rod is metric tapped. See photos. Thanks FastCap, could not have done it without you!
+4855	Industrial_and_Scientific_5	POS	5.0	These work awesomely with the Watts Water PEX and SharkBite pex, along with the Watts barbed fittings. They hold tight, and are fairly easy to remove should you need to. Don't know what else to say than that :)
+3279	Industrial_and_Scientific_5	POS	5.0	This is very high quality cable.  THe price point was great.  I have had no problems with it and it can hold a lot of weight.  Make sure you got some good cable cutters to cut it to size.
+831	Industrial_and_Scientific_5	POS	5.0	This us a really nice gas can. It seals well and sits stable. I will use this to fill other cans I have.
+Don't think twice, don't look at other crappy tape, and don't bark at the price - you'll get a hefty roll with plenty of tape for the price, but most importantly you'll enjoy every time you use it :) Have fun...
+
+6446	Industrial_and_Scientific_5	POS	4.0	Length of caliper is larger than I expected. Great tool if you need this much width.
+6190	Industrial_and_Scientific_5	POS	5.0	Good product, super price.
+5346	Industrial_and_Scientific_5	POS	5.0	Very good fitting
+Also note that Philips offers a 2 year warranty on the device, although I am sure that the specifics of the warranty are probably annoying.
+Every home should 'have some velcro on hand'.
+Pros for this toothbrush:
+7553	Industrial_and_Scientific_5	POS	5.0	got to have this drill bit, I use it numerous times and still is in good shape
+8807	Industrial_and_Scientific_5	POS	5.0	This wire is easy to handle and just the right gage.  It looks amazing when finished.  I do a lot of wire weaving so I need a good supply of wire on hand.  This is just ideal.  Really stood up to the drawing plate.  Kept it's shine. Love it.
+Anyway, I'm not sure why I ended up in this hell hole, but I guess it must be because the TSA really doesn't like seeing such large testicles on their full body scanners... I think they're just jealous. ;)
+841	Industrial_and_Scientific_5	POS	4.0	I knew that when I bought it, but wasn't willing to pay double the price for a vent cap, so I will just pour at an angle to avoid the gluging and splashing of fuel.  Otherwise it was just what I wanted, a metal fuel can, so tired of the plastic that, if left out in the sun, degrades and splits at the seams, leaking trouble into your soil.
+77	Industrial_and_Scientific_5	POS	4.0	Works as advertised.
+2724	Industrial_and_Scientific_5	POS	5.0	Arctic Silver. Accept no substitute.
+7345	Industrial_and_Scientific_5	POS	5.0	Sticks where you put it, so stick it where you want it. I have it protecting exposed terminals and a 40 amp circuit breaker. Once cured I don't have any current bleed through. It seems to work as well as the insulation on a wire. I used two or three thin coats just to be sure I have complete coverage.
+1458	Industrial_and_Scientific_5	POS	5.0	Great indicator, Starrett is mong the best. Movement is smooth and repeatable. The dual scale is perfect for my application of the gage.
+Recommended
+
+8075	Industrial_and_Scientific_5	POS	5.0	Quality product! Good price!
+1024	Industrial_and_Scientific_5	POS	5.0	Fit the nail gun and firer well.
+1555	Industrial_and_Scientific_5	POS	5.0	This was a good deal and fast.
+3366	Industrial_and_Scientific_5	POS	5.0	I'm building a large pond and am in the process of rocking it in. I'm using both cement and "waterfall foam" for everything underwater as it is "fish safe." It comes in a similar can but for a much higher price. It, too, is black, which does help make it unobtrusive. I wouldn't use this for in-the-pond cementing as I don't know if it is biologically safe, or made to last while permanently underwater. However, I also have a lot of rock work on walls that don't get wet (unless briefly when it rains), and here I need something really sticky to glue the stones in place, and fill the voids behind them. It takes some practice to get the right amount into a crack -- not too much or it will expand and spew out, all over the place. It's better to be conservative at first, and go back and add a little more if necessary, until you get the hang of it.
+
+9938	Industrial_and_Scientific_5	POS	5.0	Fine
+377	Industrial_and_Scientific_5	POS	5.0	OK
+8885	Industrial_and_Scientific_5	POS	5.0	Fast Shipping Item as described Thank you
+5423	Industrial_and_Scientific_5	POS	4.0	It works
+
+815	Industrial_and_Scientific_5	POS	5.0	This is a great item at a great price! Please keep up the good work!
+4908	Industrial_and_Scientific_5	POS	5.0	I thought this butt can is metal, but it's plastic! It fits in well around outdoor spaces.
+8695	Industrial_and_Scientific_5	POS	5.0	I recommend this stethoscope to any nurse.  I work o a stroke/remote telemetry unit.  I lost my stethoscope and needed a comparable replacement ASAP.  Amazon got me my stethoscope before my next shift.  I recommend it!
+3192	Industrial_and_Scientific_5	POS	5.0	No problems here works perfect to make gaskets and mate surfaces where distance is not crucial . Tube seals and stores product fresh if kept at room temp . Do not freeze .
+5151	Industrial_and_Scientific_5	POS	5.0	works good with my sharp shooter stapler
+2673	Industrial_and_Scientific_5	POS	5.0	Some of the best thermal paste I've ever used
+8533	Industrial_and_Scientific_5	POS	5.0	works great...not useful on long items like 15 in crescent wrench, however very easy to use on small screwdrivers, etc
+9088	Industrial_and_Scientific_5	POS	4.0	It's WD-40.  Good product and decent price.
+3983	Industrial_and_Scientific_5	POS	5.0	On a side note:  I have tried 3 or 4 different epoxy glues made by Lockti_e.  NONE of them work very well.
+8718	Industrial_and_Scientific_5	POS	5.0	very nice to have in the shop.
+But this is better than the cheaper or generic stuff.
+
+2433	Industrial_and_Scientific_5	POS	5.0	Before anything, here's the measurements.
+9737	Industrial_and_Scientific_5	POS	4.0	Very satisfactory
+5461	Industrial_and_Scientific_5	POS	5.0	I will be using this from now on no more cheap non working meters that's expensive ones to bought one disappointing.
+12	Industrial_and_Scientific_5	POS	5.0	I cut off little pieces and stick them to a piece of hard board, and use them to dress plane irons and chisels that actually have nicks in the edges.  It's a little coarse for sharpening, but it's good for removing material to get the backs of  plane irons and chisels flat, establish the bevel, get them square across, and get them ready for sharpening.  I have rehabilitated tools that I had quit using.
+Second contact your primary doctor.
+
+7316	Industrial_and_Scientific_5	POS	5.0	Works great
+726	Industrial_and_Scientific_5	POS	5.0	NICE CUTE LITTLE SWITCH
+7303	Industrial_and_Scientific_5	POS	5.0	works great
+9153	Industrial_and_Scientific_5	POS	4.0	I like it.  They worked well for what I needed them for.
+8894	Industrial_and_Scientific_5	POS	4.0	I use high density plastic in place of teak and similar tropical hardwoods in "marine" applications and have found it easy to buy the size and thickness I need from Amazon. This material is easy to cut and to drill. The piece I received and others as well have been in pristine condition when I pulled them from the shipping box. Others have had problems but if I get a piece that is not right for any reason I know I can return it.
+The rechargeable SoniCare toothbrushes cost much more, even at Costco.  And then the rechargeable batteries would go bad at some point anyway, and replacing them was such a pain.  I got this battery operated "travel" model for a trip, and found it so much easier and simpler to use, with less bathroom clutter, that this is what we all use now.
+6355	Industrial_and_Scientific_5	POS	5.0	great tool to have if you need to find the dimensions to small or medium sized objects, it comes in a nice hard-shell plastic case that has a  keeps the caliper in place so that it won't move around. easy to use and comes with 2 batteries. nice medium weight and made with metal that isn't cheap, it will last a long time if you take care of it
+
+7656	Industrial_and_Scientific_5	POS	5.0	Works as expected.  I keep it in my Jeep.
+9264	Industrial_and_Scientific_5	POS	5.0	Perfect! Nice Product! Will buy again!
+
+  These particular bags fit pretty well at a good price.
+1153	Industrial_and_Scientific_5	POS	5.0	Great screws.  I strip them off and use them individually
+5967	Industrial_and_Scientific_5	POS	5.0	This is more durable than the stuff you buy in the Big Box stores, and the price is great!!
+4764	Industrial_and_Scientific_5	POS	5.0	Nice strong screws, will be buying again.
+6712	Industrial_and_Scientific_5	POS	5.0	Individually wrapped depressors. Quality wood. I use them for stir mixing epoxy components. Beats some homemade contraptions I've used before.
+Yield Strength, psi 45,000
+Stick with the good stuff. I know 3M isn't the only game in town, but it's my go-to brand.
+
+4084	Industrial_and_Scientific_5	POS	5.0	Great product. I use these when I paint around the house and also when I spray pesticides. They stand up well to the tasks I do.
+9349	Industrial_and_Scientific_5	POS	4.0	tems were as advertised. great price, great sale.
+838	Industrial_and_Scientific_5	POS	5.0	Safe handling of gasoline
+6699	Industrial_and_Scientific_5	POS	5.0	check blood pressure
+
+5481	Industrial_and_Scientific_5	POS	5.0	I don't know why it is pink, but it works just fine. I used it with another brand 7.01 buffer solution and it stilled worked out just fine.
+I have been using this for years and gone through many rolls.
+3174	Industrial_and_Scientific_5	POS	5.0	This RTV (room temperature vulcanizing) adhesive comes out of the tube clear, dries clear, and stays clear. It doesn't care if it sees moisture, sunlight, cold temps or warm temps (perhaps up to 175F), it stays flexible. It may not be the strongest stuff out there, but it sticks and seals well......You'll find all kinds of uses for it.
+UL listing data.  Voltage, and Temperature Ratings.  MFG Date, Lot No, and contact information
+9196	Industrial_and_Scientific_5	POS	5.0	I have two labs so I'm used to dealing with the occasional ear infection.  This otoscope allows me to see everything in my dogs ears, and is much better than the cheap plastic one I have been using for years.
+8406	Industrial_and_Scientific_5	POS	5.0	I am in process of rebuilding a motorcycle and ordered several items off Amazon.  I could have bought this locally at any auto parts house, but one  of the beauties of Amazon is getting everything delivered to the house.  I didn't need to make a special trip to a local store, I got everything on line at once.  Permatex is a quality brand name you just can't seem to go wrong with.
+1484	Industrial_and_Scientific_5	POS	5.0	I use them for so many things when I make my own solutions for cleaning
+5314	Industrial_and_Scientific_5	NEG	1.0	this was yet another bottle of super glue that was ruined by air betting into the bottle. Now the caps can only be replaced ONE way, there is no secret way to replace the cap so it does not get ruined buy air getting into the bottle. This is exactly what happened and I had to throw the bottle away - I have found that no matter what brand or container that I purchase - air is the common denominator that causes the early tossing of every bottle of super glue that I purchase.
+7344	Industrial_and_Scientific_5	POS	5.0	Sticks where you put it, so stick it where you want it. I have it protecting exposed terminals and a 40 amp circuit breaker. Once cured I don't have any current bleed through. It seems to work as well as the insulation on a wire. I used two or three thin coats just to be sure I have complete coverage. Comes in multiple colors too.
+6409	Industrial_and_Scientific_5	POS	5.0	These calipers are really nice! Very sturdy construction. Very accurate. Happy with the purchase.
+1872	Industrial_and_Scientific_5	POS	4.0	A quality fastener, that will certainly work for all kinds of projects.
+4856	Industrial_and_Scientific_5	POS	5.0	I was skeptical about using these stainless clamps to secure PEX connections, as I've always only used the copper rings. However, this past weekend I had to make some connections in my whole-house PEX system -- and I turned to these stainless connectors. I found that they were just as easy to install as the copper rings. In some situations, I could see these being preferable to the copper rings.
+5858	Industrial_and_Scientific_5	POS	5.0	I LOVE this stuff!  It has repaired more products than I can recall.  This time it was an outside wine barrel planter.  Not only are these hard to find, they are impossible for an old lady to pick up, fit into the car, then haul into the yard and fill with dirt, after emptying and disposing of the old worn out one.  So investing in a roll of this tape enables me to keep the ones I have.  MUCH less expensive than trying to find a guy to hire to do the physical labor -- in my city each barrel would cost a hundred bucks.  Thank you, Gorilla Tape!
+988	Industrial_and_Scientific_5	POS	5.0	Excellent
+8030	Industrial_and_Scientific_5	POS	4.0	They came and was hidden by the house.  Just happened to find them when I used that door to find the paper.  Product is as advertised
+8131	Industrial_and_Scientific_5	POS	5.0	Arrived perfectly straight.
+3043	Industrial_and_Scientific_5	POS	5.0	Everything from Kreg is of high quality and work super well!
+2538	Industrial_and_Scientific_5	POS	5.0	Getting a fast fish out a tank for quarantine or to treat, this is a must cause its clear and kinda of blinds the fish. A net will make them hide behind rocks and youll find yourself tearing apart your whole tank. Plus the price is perfect.
+4302	Industrial_and_Scientific_5	POS	5.0	This is exactly what I needed.  Used it on the far interior wall (opposite the garage door) so my wife and daughter could easily see how far (or close) the passenger side of the car was to the door frame when pulling in and out.
+1066	Industrial_and_Scientific_5	POS	5.0	Perfect
+Iwin Unibit #1:
+7118	Industrial_and_Scientific_5	POS	5.0	Polished nicely with fine brillo pad, and conformal coat to preserve. 4 inch holes drilled to accomodate ground rail for ESDS bench to plug in ground straps. This is the best quality copper I've seen for this grade.
+The Scotch TOUGH Heavy Duty Tape broke at a mere 5 pounds. I thought I was doing something wrong. It is WEAK tape.
+1. Remove the old thermal compound. This is accomplished by using Isopropyl alcohol to dissolve and loosen the old thermal paste. I recommend purchasing an&nbsp;<a data-hook="product-link-linked" class="a-link-normal" href="/ArctiClean-kit/dp/B0007TOR08/ref=cm_cr_arp_d_rvw_txt?ie=UTF8">ArctiClean kit</a>. For minimal cost it will give you the compound remover, as well as an excellent surface preparer. Apply a several drops of the cleaner to the top of the chip and let it soak for 20-30 seconds. You might have to reapply more drops of cleaner again depending on how much thermal compound was present on the chip to begin with. Wipe all the waste off with a lintless cloth or cotton swabs.
+9854	Industrial_and_Scientific_5	POS	5.0	They work fine, As long as you have correct crimp tool and technique,
+8846	Industrial_and_Scientific_5	POS	5.0	I bought this for a custom cutout on my new computer case, and it was very easy to cut to size with a dremel. The plastic protectent sheeting on both sides ensures it is scratch free until you are ready to install it. This is not what I would normally expect to find at Amazon, but with prime shipping they were by far the best price on this part.
+3384	Industrial_and_Scientific_5	POS	5.0	works well
+9092	Industrial_and_Scientific_5	POS	4.0	Thank you!
+1415	Industrial_and_Scientific_5	POS	5.0	Heavy duty shipping tape is the only way to go. Been using this stuff for years and its rock solid.
+6963	Industrial_and_Scientific_5	POS	5.0	Came adequately packaged in a cardboard box and was easy to handle. Got two different diameters for different needs and we were not disappointed.
+ - I do keep it in a tightly-closed jar with 2 dessicant packs ((10 grams total of silicon granules)), but not in the fridge, because I use it too often.  It seems to still flow as it ought to, although the tip does clog a bit, probably because I only snipped off a tiny part of the tip so that the opening is *just barely* large enough for me to insert a slender pin.  But that's the trade-off when one works on a small scale.
+1781	Industrial_and_Scientific_5	POS	5.0	This glue works very well on filling larger than normal gaps in your projects.  Fill the gap, give a quick shot of Insta-set accelerator and then fill some more if needed.  Like the other glues in this line be sure and order extra tips so you don't have to keep making the hole wider at the top.
+6105	Industrial_and_Scientific_5	POS	5.0	Nothing much to say. Just like in the picture, good quality.
+install was a royal PITA but that is not Camco's fault.  To get to the hose and clamp I had to take off my jack and peal back part of the underside of the camper.
+3091	Industrial_and_Scientific_5	POS	5.0	Easy to use. There is a helpful chart on the web at [...] There is a 10X indicator that blinks when the reading is over 1000 since there are only 3 digits that display.
+8209	Industrial_and_Scientific_5	POS	5.0	great rod for making brackets and easy to thread and bend and non magnetic for mounting a compass to on a phantom drone.
+784	Industrial_and_Scientific_5	POS	5.0	Any DIY or electrical hobbist needs this pack!  Wire nuts of every size, and electrical crimp connectors of assorted sizes.  The wire nuts are of good quality, but the crimp connector are only of average quality (nowhere near as good as Panduit) but they will get the majority of jobs done in a pinch.  I still recommend having this set in your box of tools!
+
+311	Industrial_and_Scientific_5	POS	5.0	Very happy with purchase.
+
+7950	Industrial_and_Scientific_5	POS	5.0	Just what I needed, finish is fine with me as I have to machine it to the size I need.
+395	Industrial_and_Scientific_5	POS	5.0	This is excellent "havy rust removers" I purchase this Dewalt DW4930 4 inch cable-twist wheel to remove rust. And with 5" grinder is perfect solution for removing rust from metal.
+9834	Industrial_and_Scientific_5	POS	5.0	I have a pour spout pot, but there are times when you need a spoon. This is a good option and the price isn't bad. The wood handle stays cool. Probably something everyone needs to add to their lead pouring process.
+722	Industrial_and_Scientific_5	POS	5.0	This is a beautiful switch, very shiny and well chromed. It is a bit hard to activate (heavy duty) but looks great in my project. The on off chromed plaque make it stand out.
+This tape is also UL and CSA listed and it is weather resistant and flame retardant.  I always have multiple rolls of it in my garage and it works not only around the home but also on cars, electronics and outdoor seasonal wiring for safety.
+6083	Industrial_and_Scientific_5	POS	5.0	Nice and very accurate Hydrometer.
+7716	Industrial_and_Scientific_5	POS	5.0	IThe price is right for this item.  It is holding up great.  I know that I will be ordering more of these.
+4199	Industrial_and_Scientific_5	POS	5.0	Excellent.
+8296	Industrial_and_Scientific_5	POS	5.0	Perfect fast.
+-It expands, drips and produce tiny bubbles during the drying process.  This is my biggest gripe.  Definitely not for repairing your Lladros or others applications that require hairline precision.
+352	Industrial_and_Scientific_5	POS	5.0	Definitely works well when combining two shot vacuum hoses.
+Wish there were MORE for less money.
+6687	Industrial_and_Scientific_5	POS	5.0	She loves it
+7261	Industrial_and_Scientific_5	POS	4.0	WORKS AS ADVERTIZED...WORKS AS EXPECTED
+
+3474	Industrial_and_Scientific_5	POS	5.0	love it , it works great. bought for inserting wick into wound.
+8120	Industrial_and_Scientific_5	POS	5.0	Stout but still bendable, it worked perfectly for my use which was to build a VHF antenna (ham radio).
+8347	Industrial_and_Scientific_5	POS	5.0	Exactly as described.
+5310	Industrial_and_Scientific_5	POS	5.0	love the color chsang
+5997	Industrial_and_Scientific_5	POS	5.0	Working on circuits first time in over a decade, so this has been very useful, testing circuits before hooking them up -- works well.
+5144	Industrial_and_Scientific_5	POS	4.0	On time and as advertised
+
+8821	Industrial_and_Scientific_5	POS	5.0	As others have noted the width and length are about 3/16th of an inch short
+7107	Industrial_and_Scientific_5	POS	5.0	I am extremely pleased to have found these metals (brass, aluminum, steel) online with Amazon.com. It makes it affordable to be able to purchase small quantites of machine-grade metals especially with Amazon Prime.
+1898	Industrial_and_Scientific_5	POS	4.0	I must admit that Duck Brand Tape has improved quite a bit since I first bought it 10-15 years ago. That first purchase was a waste of money. It would not hold 2 pieces of paper together. This won't work in Texas during winter as we have too much humidity and rain. But it it great for all other uses and repairs. Lol. Who does not use this to repair something?  This roll is huge. I probably did not need two rolls but I never want to run out of "Duct Tape". I recommend this tape.
+6508	Industrial_and_Scientific_5	POS	4.0	caliphers are great for measuring small items around the table saw, router, planer etc these caliphers seem to work great.
+7452	Industrial_and_Scientific_5	POS	5.0	works great as stated would highly recommend and use again! buy and use with confidence.
+8816	Industrial_and_Scientific_5	POS	5.0	Works perfectly! I used this product to wrap the PVC pipes in my shop dust collection system. The static is discharged through the grounded wiring.
+7576	Industrial_and_Scientific_5	POS	5.0	Easily assembled, reasonably priced, sturdy and stable. Good quality. Thank you.
+7994	Industrial_and_Scientific_5	POS	5.0	Needed to fabricate some new drip plates to replace rusted-out ones for my gas grill.  Product arrived quickly, was of high quality, and worked perfectly.
+2340	Industrial_and_Scientific_5	POS	5.0	Great to clean dies and lubricate them.
+8416	Industrial_and_Scientific_5	POS	4.0	Worked as designed.  Used this to connect range hood ventilation fan ducting from kitchen to roof.
+4599	Industrial_and_Scientific_5	NEG	1.0	Did not work in Mag Flashlite.
+
+Update: 1st time I touched up my roots & this caulk dyed with my haircolor!  This never happened before, & I've been dying my hair for over two decades!!!  Now I get to scrape it all out & re-do the whole job with BETTER caulk!  HORRIBLE PURCHASE!!!!!!
+8520	Industrial_and_Scientific_5	POS	5.0	Using this for brewing beer.
+3338	Industrial_and_Scientific_5	POS	5.0	Great
+
+Unfortunately I did not realize at the time the significant difference between the Type I (with a plastic funnel) and Type II (with a metal flexible funnel).  For refilling a vehicle, I should have got the Type II because, as one reviewer noted, the plastic funnel does not allow sufficient angle when trying to pour horizontally into a vehicle's gas tank.
+5281	Industrial_and_Scientific_5	POS	4.0	I have used this product to repair holes in rubber boots and to reattach a detached sole to the boots.  It works very well but sometimes it comes loose.  There is a transparent version which seems to be more prone to hardening and cracking.  I used this product as a general adhesive, not just for fixing boots.
+1706	Industrial_and_Scientific_5	POS	4.0	It is tough and strong. I don't have anything heavy enough to put on them. Hate to waste a quality item on a 4 x 6 work bench. Definitely worth the cost.
+8318	Industrial_and_Scientific_5	POS	5.0	great value
+7392	Industrial_and_Scientific_5	POS	5.0	Very good
+That sentence above is really all you need to say. But if you're new to the game, heres a bit more. This is the defacto fix everything tape. Wrap it around something and it will be fixed. It will stay put, it won't leak, it will hang on to your car, it won't budge. It just does all that. You can pull out a length and tear it off. It will stick and stay stuck. It will come off when you want it to and won't leave a mess. It is all that. If its color is black and you work in show biz, its Gaffers Tape. This one is slate blue, which is a nice neutral color. Its Duct Tape and its made by 3M. Get it.
+
+2548	Industrial_and_Scientific_5	POS	5.0	I had never heard of Bob Smith before a couple years ago, now I almost exclusively use their stuff. Its inexpensive and just works.
+6165	Industrial_and_Scientific_5	POS	5.0	Good.
+9572	Industrial_and_Scientific_5	POS	4.0	Very satisfactory
+I had ordered a Tampa Rays coffee mug, and it came with
+2418	Industrial_and_Scientific_5	POS	5.0	ok
+ UPDATE: Well, it's five years later and I still have small rugs stuck to carpet! A couple have been pulled up and stuck straight back (with the same tape) and It works, but too well. I think I've replaced the tape once (if that) on one or two because I wanted to move a rug slightly and the tape stuck to the carpet instead of the rug (not complaining, it kept it where I wanted it as long as I wanted it there, no matter what!) The problem (if I had the audacity to complain) is that t takes a good 10-15 minutes to peel up an edge. I recently had to pull up my huge living room rug and replace the tape and I didn't remember it being such an ordeal but lordy! I won't change my rating because my awesome vacuum cleaner won't suck up the smallest rug, even stuck to carpet but dang, I don't remember it being so difficult to install!! It's literally SO hard to pull an edge up of the tape that I just did two sides of my huge rug and hope no one trips on the sides I didn't do I don't have the strength to go thru that again for two more sides! I'm sure I'll change my mind when I vacuum it next time but for now, ugh!! Just kill me!
+8571	Industrial_and_Scientific_5	POS	4.0	excellent
+Assembly, as compared to reassembly, is easy with&nbsp;<a data-hook="product-link-linked" class="a-link-normal" href="/a-decent-power-driver/dp/B00N3W70P0/ref=cm_cr_arp_d_rvw_txt?ie=UTF8">a decent power driver</a>. Use an&nbsp;<a data-hook="product-link-linked" class="a-link-normal" href="/extension/dp/B004LC6WCI/ref=cm_cr_arp_d_rvw_txt?ie=UTF8">extension</a>&nbsp;to attach the wheels and prepare to press hard. I flipped the cart over so I could push downward and that worked really well. Once installed, those wheels are really in there and won't pull loose without a serious fight. Also - those wheels are big and solid. They could probably be used for millwright moving dollies.  As for the rest of the screws - lighten the torque on the driver.
+3271	Industrial_and_Scientific_5	POS	5.0	Glues pipes tight! Good price and fast shipping don't hurt either!
+1312	Industrial_and_Scientific_5	POS	5.0	exactly what i neded
+5911	Industrial_and_Scientific_5	POS	5.0	You need to buy your best friend one ... easiest tpost puller ever ..
+9998	Industrial_and_Scientific_5	POS	5.0	what iwas looking for
+2197	Industrial_and_Scientific_5	POS	5.0	Even though one of these was damaged, I still use it for absorbing any moisture that might invade the interior of our safe.  Hydrosorbent SG40 is a simple aluminum holder filled with  Silica Gel and it works.  I keep one in the safe and the other elsewhere.  When the one in the safe is full or close to full with moisture, I remove it and replace it with the backup.  In an effort to maintain even moisture I simply change the canisters about one time a month or no longer than every 6 weeks.
+7263	Industrial_and_Scientific_5	POS	5.0	good product
+8800	Industrial_and_Scientific_5	POS	5.0	Wire arrived promptly and is of high quality
+7585	Industrial_and_Scientific_5	POS	5.0	Outstanding product for connecting multiple electrical wires, especially when there are three or more.
+7870	Industrial_and_Scientific_5	POS	5.0	great value
+8733	Industrial_and_Scientific_5	POS	5.0	Love these Spax Screws !  They only cost slightly more than the cheaper screws that often break  and require pre-drilling. Plus the heads won't strip out either ! On a recent project I actually found that these were less expensive than the regular lag bolts at HD. I ask myself why would I use any other screw than these for projects that really matter.
+6849	Industrial_and_Scientific_5	POS	5.0	Great bicycle for a two year old's birthday.  Stays at grandpa's house. Needed pedal boosters which made it much easier to learn to pedal on the deck.  Great color and durability for baby brother.
+2596	Industrial_and_Scientific_5	POS	5.0	Items are great
+
+
+3574	Industrial_and_Scientific_5	POS	4.0	Smells SOOO bad when you're using it, but it's still pretty handy to have.  It's also sort of sticky.  It does have a noticeable shrink rate to it, and doesn't hold up quite as well as it claims to temperature.  Delivery time was pretty good.
+
+
+2580	Industrial_and_Scientific_5	POS	5.0	I use this stuff all the time. Great adhesion level, watertight, and clear. Can't go wrong.
+
+If you ever have to join wires that you can't easily solder, these connectors are the next best thing -- or perhaps it's a tie.
+4586	Industrial_and_Scientific_5	POS	5.0	good experience
+8653	Industrial_and_Scientific_5	POS	4.0	So far so good.  Easy to install but watching the You tube videos on how and how to tell which lock to buy first sure helps.  Hopefully this will hold up.
+7760	Industrial_and_Scientific_5	POS	5.0	as ordered - no problems
+Stick to what works best.  In this case, sticking works.
+6765	Industrial_and_Scientific_5	POS	5.0	I really like this stethoscope.  It is sensitive and versatile .
+2990	Industrial_and_Scientific_5	POS	5.0	Cant go wrong using a DeWalt branded finish nail.  Use them in my DeWalt nailer and with the price being what it is I see no reason to go with a off brand even though they may be just as good.  Why take the risk for little or no savings.
+4755	Industrial_and_Scientific_5	POS	5.0	Good.
+730	Industrial_and_Scientific_5	POS	4.0	works nicely, looks good it is a little hard to flick up, I should have gone with push button for my project
+Q313A 1105 / 75" / Nut & Spade Terminal / 1/2" Attaching Nut
+933	Industrial_and_Scientific_5	POS	5.0	Great screws. They don't bend or cause problems. The go in straight and strong every time. I'll be buying more soon.
+5837	Industrial_and_Scientific_5	POS	5.0	I literally never use duct tape any more.  In fact this is what MacGyver would have used were the TV show to be made today!
+Wishes: (1) I really wish there was a better way to clean out the tube.  Instructions say to use their brand of gun cleaner, or acetone.  Not wanting to use much of a bottle of my wife's nail polish remover (acetone), I used fairly high pressure water through the tube, shortly after use before it could start curing.  That actually worked moderately well, but not completely.  It's still easy to see some of the yellow foam residue on the inside of the tube (a bright yellow color).  There is plenty of room in the applicator tube for the next time I use the product, but over time I'm concerned that would build up.  (2) It also would be nice if there was more instruction about temperature considerations.  Only one mention of temperature (other than appropriate caution about storing in a high heat environment) is as follows: "Tack free in 8 minutes, trims in 30 minutes (up to 1" bead @ 75F (24C) and 50% relative humidity).  What does that really mean?  It just takes longer in colder or warmer temperatures, or one can only use smaller beads of foam in higher or lower temperatures?  Or something else?  What's the temperature range of use?  It just simply does not say anywhere on the can.  For information, I did use it to seal a place where our gutter meets the roof line that had not been properly sealed to prevent water back-up under the roof (yes, I realize that's not the listed, intended use - but it works great!).
+This table has become an essential tool, performing all kinds of tasks like moving heavier stuff around and catching cans to be recycled in the basket in addition to augmenting the counter space.
+3010	Industrial_and_Scientific_5	POS	5.0	Great item and well made at a very good price. Like the ones in the good stores but a better price and delivered.
+i am now an Amazon Hater- so get it elsewhere- my opinion
+8198	Industrial_and_Scientific_5	POS	5.0	This was just incredible.  I use it to hang a windsock in the back yard.  Does great.
+
+- Bluetooth = 2.45GHz
+
+9563	Industrial_and_Scientific_5	POS	5.0	These were half the price of the ones sold at my local industrial supply store and built better.
+3882	Industrial_and_Scientific_5	POS	5.0	Great home repair kit item.
+1592	Industrial_and_Scientific_5	NEG	1.0	Hard to write an accurate review when they are so heavily censored. But we will try, here we have another Pr**e item that has doubled in cost and is no longer in any ballpark on price.
+5835	Industrial_and_Scientific_5	POS	5.0	Plain paper with no glue: Duct tape: Gorilla tape. Best tape ever. Literally holds my work van together at the seams. I taped tarps to a 20' x 10' pole tent when I ran out of bungees and the tape outlasted the bungees. Held strong outside for a full year before I replaced. Outlasted the tarps as well. But it get's better. There are limitless possibilities now! You can patch an inflatable boat with this tape! You can tape your kids together to have just one! No more need for babysitting either - they'll still be firmly attached to the wall upon your return. I wouldn't hesitate to fully conquer a struggling trespasser with a roll of gorilla tape. No mess that way.
+2635	Industrial_and_Scientific_5	POS	5.0	I use it for everything now. It's a great asset to have around. Assembly wasn't as easy as I would've liked due to some ambiguous instructions but it wasn't too hard to figure out.
+
+9241	Industrial_and_Scientific_5	POS	5.0	works as advertised
+2355	Industrial_and_Scientific_5	POS	5.0	People may think they are healthy until, one day, they feel symptoms and a comprehensive health check reveals serious medical condition, and sometimes the damage is Irrversible.
+615	Industrial_and_Scientific_5	POS	5.0	Great tape, very sticky, nice plastic storage container to keep it clean.  Yeah sure you can get 10 rolls at harborchinesecrap for a few bucks, but I've used that stuff too and it's worthless.  There is a lot of crap electrical tape on the market today, but this is quality stuff.  Spend extra for tape that sticks, but this.
+ 2. We have actually used the product and
+7126	Industrial_and_Scientific_5	POS	5.0	These are 5.00 for a pack of 5 or 6 if you can find them at the local store - for about the same price I ordered a whole bag and saved a ton - the nuts are well made [same as the store packaged] and the threads perfect - would recommend.
+I consider this a good purchase.
+2950	Industrial_and_Scientific_5	POS	5.0	These are nice short leads with alligator clips on each end.  They seem to be sized perfectly for electronics use.  But what if you wanted them for something more.. well.. personal?  You see my point?  You can probably see it better if you're younger and more active in.. well.. the pursuit of happy happy happy.  In that case just lengthen them and stop complaining.  Some people,..
+7222	Industrial_and_Scientific_5	POS	5.0	It is exactly what I expected. It was a great value a great product and I would recommend it to anyone.
+4332	Industrial_and_Scientific_5	NEG	1.0	I carefully researched before purchasing this oven. I received it promptly :) I used it for over a week. Because the inverter technology was new to me,. i thought that i was not using the oven properly., After stuggling, as i said for a week, it became clear to my husband and i that no matter what we did, the oven would cook correctly. It took over five minutes to make tea, when my old microwave oven that was larger and less powerful, lower wattage, only took 90 seconds!
+Really a nice upgrade...but...for not much more you can just buy the LED flashlight. This was (@$16) and they have the 2C LED (non-pro) on sale for $23.95 every so often. So...not much more for a whole flashlight.
+Glue Stick: Think of glue sticks as thick white household glue in stick form.  Glue sticks are great with paper, but have few other applications.<a data-hook="product-link-linked" class="a-link-normal" href="/Avery-Glue-Stic-0-26-oz-Pack-of-6-98095/dp/B002B55RGY/ref=cm_cr_arp_d_rvw_txt?ie=UTF8">Avery Glue Stic, 0.26 oz, Pack of 6, (98095)</a>
+Industrial-looking and unfinished, as in its photo. Mine has a visible welded seam. It doesn't look like it would disappoint in any project.
+3864	Industrial_and_Scientific_5	POS	5.0	This weld works great for housings and corner repairs. Has not failed me yet and continues to impress.
+2201	Industrial_and_Scientific_5	POS	5.0	These are a must have if you store your guns in hard cases.  Always put one in with your open cell foam hard cases to prevent moisture/rust.
+8792	Industrial_and_Scientific_5	POS	5.0	This was bought to put multiple band elements on a long dipole.  Looks good.
+4503	Industrial_and_Scientific_5	POS	5.0	Using this to fill cracks in treated pine deck with splits that keep allowing paint to crack.  Scrapping boards, then smearing this on with 3" paint scrapper. Satisfied so far; although, it takes at least 24 hours to dry.  Completed about 4 sq. ft. a year ago and paint has held up well so far.  Time will tell.
+The tone is strong enough to easily find wires behind drywall, but this is also the source of my one and only complaint: If you have a box with several electrical lines going into it, even if you separate all the lines inside the box and at their "far" ends so that there is zeero continuity between separate lines, the signal still tends to "splash" onto all the other lines. In a box with three lines I got signal on all three even though the tone generator was only attached to one. This is more pronounced where the lines are closest together (at the box, of course).  This led to some confusion when I was in a small closet and no matter where I put the probe I got signal!  Imagine my surprise to see that the line I was tracing lead not only UP from the box to the ceiling,  but DOWN to the floor as well.... and off to the side too! Whoops! That ain't right!  However with a little patience and understanding of what was happening I was able to eventually sort out the individual runs. Further from the box the signal drops off on the non-connected lines faster than on the connected line. So I had to take a few educated guesses as to where the line I was tracing might be, and then move far away from the box and look for it. With a few tries I found each line and traced them to their ends. Bottom line: this thing works, and it works thorugh drywall, but it still requires you to use some brains.
+2633	Industrial_and_Scientific_5	POS	4.0	I was going to return this because it really didn't work out for what I really needed. With winter here, it has proved to be a real back saver. I use a wood burning stove for heat and this cart is perfect for moving wood from the stack outside to the stove in the living room.
+> Securely hold a splint in position in an emergency.
+
+5949	Industrial_and_Scientific_5	POS	4.0	works
+
+
+4306	Industrial_and_Scientific_5	POS	5.0	Great product as described
+-Strong
+1139	Industrial_and_Scientific_5	POS	5.0	Works great, used on stove chimney to cover breaks in joints where screwed in areas didn't get a complete seal. It can get messy if you apply with heat or over silicone, but it has held for us very well.
+
+8509	Industrial_and_Scientific_5	POS	5.0	this will come in handy some time.. I ordered it mistakingly thinking it was higher pressure hose..  it seems to be of good quality....
+1473	Industrial_and_Scientific_5	POS	5.0	When I bought this product I questioned spending $30.00 for a super glue kit.  But after having it for several months, I would not hesitate to buy another.  This kit shows that there are different qualities of super glue. And the various viscosities provide for a wide range of uses.  The thick gel version can be used as a filler for small spaces where mixing epoxy would just be too much trouble.  And with the included activator, the repair job is ready to use in a matter of minutes.
+In short.. (which incidentally works fine with this, of course) .. I have to give this an unexpected thumbs up.  While it is nowhere near the Rigol class, for a hobbyist, this is a rock solid power supply.  I will (obviously) follow this review up with an addendum if it blows up on me.
+6563	Industrial_and_Scientific_5	POS	5.0	Great for price, measures inches and mm up to .00 I use mine for reloading. Came in a good case.
+4688	Industrial_and_Scientific_5	POS	5.0	good
+1705	Industrial_and_Scientific_5	POS	5.0	Built tool cart with wheels... Easy to move around and the locks work very well. Seem to be very good quality.
+9389	Industrial_and_Scientific_5	POS	5.0	It works fine, wish it were made in the USA.
+2929	Industrial_and_Scientific_5	POS	5.0	great item for lab work. Would definitely purchase again.
+7881	Industrial_and_Scientific_5	POS	5.0	Just as described.  Fast shipping.  Worked great.
+266	Industrial_and_Scientific_5	POS	5.0	You open the box and there they are! I loaded them into the nail gun, pulled the trigger and they came out.
+6402	Industrial_and_Scientific_5	POS	5.0	Use this constantly, very well built, easy to use, and has remained very accurate.
+5845	Industrial_and_Scientific_5	POS	5.0	This product simply out-performs plain old duct tape hands down. The fabric and, the adhesive seems much stronger than ordinary duct tape. I did notice that it doesn't particularly 'stick' well in ice cold conditions, but for warmer temps it out shines in every way,.
+1267	Industrial_and_Scientific_5	POS	5.0	teeth are at least 5 times whiter. nice price for a good product. will purchase again!
+8655	Industrial_and_Scientific_5	POS	5.0	Double sided sticky tape to keep your rugs in place. It works with all kinds of surfaces - haven't had a problem yet. Recommended!
+8479	Industrial_and_Scientific_5	POS	5.0	thanks for item as described and fast shipping
+6950	Industrial_and_Scientific_5	POS	5.0	The advantage of using brass screws is that they are relatively easy to cut cleanly to length. Either use a screw cutter or thread a nut above the point to cut and cut the screw then unscrew the nut over the cut to straighten the thread area back out.
+2733	Industrial_and_Scientific_5	POS	4.0	Used this to replace a Heatsink/fan on a PC.
+The button intuition is lost.
+Couple things.  I found the carpet button has to be firmly pressed to get the beater bar stated.  Also, I vacuumed the first rug, and without turning it off, I picked up the vac to move a couple feet to the second rug.  The beater bar started to rattle a bit.  I'll check that the next time I use it, but I imagine it pulled away from the handle a bit.  I should have turned it off.
+I always have a bottle of it with me, or at least within arms reach, because
+4888	Industrial_and_Scientific_5	NEG	2.0	These don't stick well at all. My old ones were why I bought these... Not at all impressed...
+7288	Industrial_and_Scientific_5	POS	5.0	Rats had chewed the wire of my outside refrigerator . It was very difficult to get to recover the wire in hard to reach area. This compound has done wonderful job in reciting the wires. It has a brush and all you need is to nicely brush the wire up and down. Let it dry then another coat. Thank you.
+8573	Industrial_and_Scientific_5	POS	4.0	Its ok
+2070	Industrial_and_Scientific_5	POS	5.0	Great product and great taste.  YES, the product does have fluoride which is what I wanted.
+7603	Industrial_and_Scientific_5	NEG	2.0	I don't like to write bad reviews but I do always want to be honest and honestly this item is a bit of a let down.  I can't really complain as it was just under $3.00 but it isn't quality by any means.  The light itself is not very bright and the button to turn it on is right under the end of the clip.  This may be a common place to put the on button but here the clip is pretty tight so it seems to turn itself on even with the slightest unwanted pressure.  As far a pressing the on button it is very small so you have to make sure you press down just in the right spot or you'll be fiddling with it for sure.
+
+4654	Industrial_and_Scientific_5	POS	5.0	Exactly as ordered - Works Great
+The Aluminum rods were perfect for our project.
+Easy to use. No complaints.
+7498	Industrial_and_Scientific_5	NEG	1.0	Unable to try it
+4136	Industrial_and_Scientific_5	POS	5.0	Works really well. The only thing I wish it could do better is debureing inside corners.
+2869	Industrial_and_Scientific_5	POS	5.0	Needed more test leads and these are decent quality for the price.
+Our primary uses for a microwave are reheating foods, defrosting frozen items, cooking bacon (on special microwave bacon trays lined with paper towels, be sure the bacon is not flat, but humped in the middle off of the paper so it doesn't stick to paper), melting butter on LOWER power level, & boiling water
+9860	Industrial_and_Scientific_5	POS	5.0	Exactly as described
+4036	Industrial_and_Scientific_5	POS	5.0	As I stated on the 2 other colors I got of these, these are the best DOORSTOPS out there.  No other can do like these.  So tired of the doorstops on the floor doing nothing.  These slide right into your door jamb and keep the door open.  Fantastic Product.
+2282	Industrial_and_Scientific_5	POS	5.0	Great outdoor adhesive.... Pours like maple syrup, expands and becomes rigid like plastic. Only a small amount is needed, smeared to a thin layer. Be sure to clamp, because the glue will expand and pull apart.
+2886	Industrial_and_Scientific_5	POS	5.0	Excellent product and service!!  Thank you!!
+All in all, this is a nice bit of kit. My plan for it is to add an anti-static mat and to use it as a build surface for quadcopters and arduino devices. This way I can put the projects out of the way instead of leaving soldering irons and glue guns all over my kitchen counters.
+1175	Industrial_and_Scientific_5	POS	4.0	saves me from stuffing old socks into my window ;)
+
+8611	Industrial_and_Scientific_5	NEG	1.0	Junk, these last for about 1 to 3 minutes each before its used up, I'll stick with better brands from local hardware stores from now on.
+In comes repair guy 1 then second opinion guy. Remedy; You gotta take that toilet out, bust out all that floor tile, cut out the sub floor, put in new sub floor, put in new tile, new toilet flange, and re set toilet then grout everything. Estimate to "Do It Right" nearly two grand. Since you have a carpenter, then a tile guy, then a plumber guy. My heart sank as I knew how much cash I had at the time.
+431	Industrial_and_Scientific_5	POS	4.0	A little cumbersome to use but works great..... what do you expect for the price
+Update - We have been using the Sonicare Xtreme for almost two years, and here are some tips:  Clean the toothbrush head with the head pointing down under the hottest water out of the faucet.  Then dry the head shaft and back of the head with the head pointing down.  List will eliminate any water seeping into the head base.  The head normally last two months, and with standard use, the batteries should last the same.
+6189	Industrial_and_Scientific_5	POS	5.0	Good product
+
+4234	Industrial_and_Scientific_5	POS	5.0	Simple, useful tool
+Though it is not certified to the same level as a "traceable" caliper, it works excellently to more than enough accuracy to meet every need I have for it in my shop - where I use it for auto repair, small metal works, and wood working.
+
+7324	Industrial_and_Scientific_5	POS	5.0	Glad I found this stuff! It has so many uses, I could write a book! Kinda messy though, so don't get it on stuff you don't want it on, like your fingers!
+1828	Industrial_and_Scientific_5	POS	5.0	What can be said about a screw? Well plenty if you are talking about a Kreg screw when used in conjunction with the Kreg system. I use my Kreg screws to build frames,  book shelves and cabinets.
+
+92	Industrial_and_Scientific_5	POS	5.0	happy
+5034	Industrial_and_Scientific_5	POS	4.0	it does ok in easy to get to places
+8200	Industrial_and_Scientific_5	POS	4.0	My only complaint is that these would not fit within a .25 bore bearing.
+
+3629	Industrial_and_Scientific_5	POS	5.0	as expected
+5539	Industrial_and_Scientific_5	POS	5.0	These are just fine terminals , they arrived on schedule and the quality are just as good as any that I have purchased anywhere else. These are GB Gardner Bender and at a very reasonable price.
+You can easily extend the supports to the proper length as you would with a pipe clamp and then chinch it tight with the hand hand grip.  The grip and ball joints at the top and bottom are made of plastic and would appear to be easy to break.  If it does, the support becomes useless.  This concern is why I rated it with 4 stars.  However, I've dropped mine on hard tile twice now and have not broken anything yet.
+My personal Sonicare experience:
+Now as far as removal goes, that's going to be a problem. This is not a glue you can put acetone on and remove. Once you put this on something and it cures, a chemical reaction has occurred and it's there for good. In most cases, attempting to remove this will wreck the actual items being bonded before it damages the bond itself. So needless to say, this isn't something made for temporary usage whatsoever.
+Cons:
+9125	Industrial_and_Scientific_5	POS	5.0	I should not buy items before I clean out my garage. When this can was on its way, I found 4 more in my garage. Now I'm looking for things to oil. This product, as always is wonderful. I recall my Dad filling a metal can w/ oil. He'd hand me a rag and tell me to stop it from running down the door. Glad we don't have to use those any longer. Anyhow, it's a great product and according to my garage, should last a lifetime!
+7441	Industrial_and_Scientific_5	POS	5.0	Grex pin guns are the best, and so is the ammo.  I order a lot of these in all sizes for our production woodworking shop. Never received any complaints except that they will not fire out of a couple of our older Omer pin guns.  Amazon quickly fulfilled an order that was incomplete with no questions asked.  That's good customer service.  These are good pins.  Will not work in older metric pin guns.
+drilled a hole in it then used glue and stuck it onto the Sonicare brush head shaft. That works fine.
+4642	Industrial_and_Scientific_5	POS	4.0	it works, dripper doesn't fill all the way when trying to remove the
+6326	Industrial_and_Scientific_5	POS	5.0	How cool is this? Very cool :o)
+5546	Industrial_and_Scientific_5	POS	4.0	good product sold at a fair price.
+3984	Industrial_and_Scientific_5	POS	5.0	this is really good epoxy.  drys to a somewhat dark gray.  OK by me.  takes longer to set but is really hard after it does.
+5881	Industrial_and_Scientific_5	POS	5.0	Classic gorilla tape, multi purpose, stucks ANYWHERE, I keep 3 rolls of this stuff on hand all of the time.
+
+8446	Industrial_and_Scientific_5	POS	5.0	Same quality as a big dept store
+8357	Industrial_and_Scientific_5	POS	5.0	I order a lot of these brass rods and they are always the correct size and length.
+I have a output of 2" dia. this connection does not fit
+
+Highly recommended, as part of a modular test lead set!
+
+6257	Industrial_and_Scientific_5	POS	5.0	Its a Fluke
+5710	Industrial_and_Scientific_5	POS	5.0	This product is a very good value and it works fine so far. I would certainly recommend these to a friend.
+
+5554	Industrial_and_Scientific_5	POS	5.0	great
+After receiving a great batch of cups lightening quick from "WelDun Solutions" I wrote the following positive review and re-ordered some more of them.
+The suction is superior, also. I cleaned my large, wool area rugs which tend to absorb the cleaning solution very readily. With other machines, I didn't get much water back out and I had to set fans blowing on the rugs to get them dry within a day. This machine extracted way more of the dirty water than any other machine I've ever used except for a rented Rug Doctor. My rugs were dry to the touch within about 3 hours. This is super important for households with crawling babies because it's unsafe for them to crawl on newly cleaned rugs that aren't completely dry. Plus, it's so much easier to maneuver than a Rug Doctor.
+6271	Industrial_and_Scientific_5	POS	5.0	Fluke is, in my opinion, THE brand for electrical testers. The Fluke 2AC is no exeception. It is a very sensitive testor and has design improvements over the previous model, such as always being on versus having to remember to switch it on each time. My experience has been that Fluke stands behind their products and that adds to the value of their products. (I am not affiliated with Fluke in any manner)
+9128	Industrial_and_Scientific_5	POS	5.0	Just saw two studies that used WD 40 as a rust preventor and it beat out almost evrything else. I was pleasantly surprsied.
+239	Industrial_and_Scientific_5	POS	5.0	We buy these high-efficiency bags for our aging shop vac, because they work the best.  They collect every bit of dust, dirt, debris and fuzz and protect the filter from getting dirty too quickly, and the motor from damage.
+
+1550	Industrial_and_Scientific_5	POS	5.0	Good stuff, a bit smelly for 3-4 days after, so you need a lot of ventilation, but looks great against glass blocks.  Holds well.
+2781	Industrial_and_Scientific_5	POS	5.0	Great stuff. Worked  perfectly. What more can I say?
+
+
+
+
+4510	Industrial_and_Scientific_5	POS	5.0	WONDERFUL
+9193	Industrial_and_Scientific_5	POS	5.0	I was an electrician for twenty years and now am an electrical inspector (still doing electrical work for family).
+5619	Industrial_and_Scientific_5	POS	5.0	works great but you need to buy the inexpensive Amazon supplied tool for installation.  No instructions so lube the tool bolt with assembly lube: insert tool just under top coil on each end and compress maximum to place spring so you can see where it is going to reside. Then back off the nut watching to make sure the spring is opening in the proper TWO locations.  Piece of cake if you do it right.  Try wrong and you will not be pleased and possibly angry.  Still confused watch on-line use of the compression tool video that doesn't tell you the stuff above.
+7376	Industrial_and_Scientific_5	POS	5.0	Excellent Product!!!
+
+Found the product to be easy to trim/cut and very strong and flexible.  Takes some time to determine spacing of the
+787	Industrial_and_Scientific_5	NEG	1.0	Gave up on this one.  Turning lights off and on too early.  Light flickers.  Not worth the price.  Can only use with incandesant  bulbs.
+1' 1.5mG
+So I wasn't really sure the hook would stick well with that thickness sink wall. Well it does stick good. I found that the magnet is actually removable from the hook. See photos. The magnet also has a rounded domed surface on one side and a significant flat spot on the other. You can use either side you want. So if you want your hook to rotate freely use the domed side, if you want it to rotate less freely then use the flat side to the sink. I could still rotate it with the flat side down, but it was noticeably harder to do so.
+This type lasted all summer in the hot Southern California sun with no problem.
+1895	Industrial_and_Scientific_5	POS	4.0	Very good tape, but not an excellent tape.  The glue is not as strong as I expected from a tape that calls itself professional duct tape.  I can still remember the old duct tape my dad used to buy.  I have no idea where he got it, but the glue on it was so sticky it would hold nearly anything, this tape isn't as good as that.  However, it tears like duct tape should, and is sufficient for about 90% of jobs you would expect duct tape to handle.  It's only the 10% I feel it is too weak for that I deduct the star.
+I will report back if I run into any issues.
+- It cost only $30, and looks / feels / operates identically to a $100 Starrett
+9662	Industrial_and_Scientific_5	POS	5.0	Great
+6422	Industrial_and_Scientific_5	POS	5.0	I don't use this often but for the price I thought it would be a great tool to have in my shop. So far it have be extremely accurate and I have checked it serevel time to makes sure.
+7548	Industrial_and_Scientific_5	POS	5.0	I needed to drill some holes in a metal media console. This was exactly what I needed. It chewed right through it. It was difficult to get started due to the leverage required.
+The lid is sealed- has a gasket and a metal clamp to hold it down.  It works perfect.  They say to use a garbage can but this is 10x better- its seals better, its a better size, its better quality- is less likely to damage from use- an more.
+Cheaper at the "HF" store of course but the Amazon price isn't bad, and Prime shipping convenient.
+Will buy again.
+8926	Industrial_and_Scientific_5	POS	5.0	Product as advertised
+Epoxy:  When you need a strong rigid workable (e.g. sandable surface) adhesive, particularly for use on metal or hard plastic, epoxy is a much
+- once your glue is set (30 seconds or so), use a rag to wipe off all excess glue and primer
+6909	Industrial_and_Scientific_5	POS	5.0	Good quality heat shrink tubing, nice plastic box, excellent for electronics projects or small amperage DC cable repair - I approve!
+2960	Industrial_and_Scientific_5	NEG	1.0	These are absolutely the worst leads I've ever seen.  They prove that the "cheap overseaas" moniker is deserved and --astoundingly-- devolving.  The wire is maybe 28 AWG, _maybe_.  It's uncoated copper, pre-corroded (turning green/black).  The plastic coating is a bit rougher (which initially seemed nice, versus the previous el-cheapo leads with shiny plastic coating).  The clips are of course awful.  The clips are crimped (not soldered) onto the wires and coating, with the bared wires folded back over the coating...meaning that simply "adding a dab of solder to the crimp" (which used to work on all previous el-cheapo leads) no longer works and instead causes a molten, stinky plastic mess.
+- Etch the concrete, don't skip this step!
+6398	Industrial_and_Scientific_5	POS	5.0	great
+7963	Industrial_and_Scientific_5	POS	5.0	Quick shippment, exactly as defined in listing, will be perfect for several projects I have in the works. Thanks again!
+3373	Industrial_and_Scientific_5	POS	5.0	Ive used a number of the GREAT STUFF products with the same general results, follow the instructions carefully, keep the spray away from your hands / skin (Its really hard to get off), and never underestimate the amount of expansion that the foam will have once dispensed!
+This is an expensive set of bits - it costs more than my first drill press did! If you wish to experience these high quality bits at a lower cost, there may just be a way to do so. Simply do what we all love to do on amazon - shop around!
+2396	Industrial_and_Scientific_5	POS	5.0	My wife and I used this "shoulder dolly" to load an 800 pound upright grand piano onto a dolly, and to move some dressers and whatnot.  The shoulder dolly is TRULY amazing!  Be certain to pay close attention to the instructions for using the dolly, because "pushing away from the object you are lifting" rather than using your back or legs to lift is VERY important, and although it is non-intuitive, lifting this way using the shoulder dolly is SO easy.
+9163	Industrial_and_Scientific_5	POS	5.0	Great useful product - hope it holds up long term.
+
+264	Industrial_and_Scientific_5	POS	4.0	I've found these B&C Eagle full round head nails to be decent. They worked fine with my Porter Cable FR350 framing nailer. These nails came in a 500-count box and were more expensive per stick than buying in bulk, but I don't use bright 2-3/8" framing nails that often so didn't want a pile of them hanging around after the job was done.
+5984	Industrial_and_Scientific_5	POS	4.0	Perfect solution for sealing the gap between the house and concrete slab.
+
+8090	Industrial_and_Scientific_5	POS	5.0	Good quality and fast shipping
+1057	Industrial_and_Scientific_5	POS	5.0	wire staples are great!
+8689	Industrial_and_Scientific_5	POS	5.0	Just what I needed!
+In fact, the good news is, our water was fine on all counts -- except "hardness." We have about 400 ppm (parts per million), which is relatively high. Of course, we already knew it was hard, and compensate for that with the salt softener.
+7451	Industrial_and_Scientific_5	POS	5.0	Best product on the market for sealing steel!  Heat resistant and quick drying!  The best option is to replcae the bad part, but it's not always affordable and this is the next best thing to seal up that leak area!
+7906	Industrial_and_Scientific_5	POS	4.0	good
+Velcro has been around forever. Noah must have had a reproductive pair of male and female Hook N' Loops on the Ark.
+3783	Industrial_and_Scientific_5	POS	5.0	WORKS WELL
+8569	Industrial_and_Scientific_5	POS	4.0	Sticky stuff.
+6044	Industrial_and_Scientific_5	POS	5.0	just enough
+277	Industrial_and_Scientific_5	POS	5.0	<div id="video-block-R1R0UOWWZ8JCJQ" class="a-section a-spacing-small a-spacing-top-mini video-block"></div><input type="hidden" name="" value="https://images-na.ssl-images-amazon.com/images/I/C1LhXuIckqS.mp4" class="video-url"><input type="hidden" name="" value="https://images-na.ssl-images-amazon.com/images/I/71ehSEIaPlS.png" class="video-slate-img-url">&nbsp;At this low cost, I bought six of these just so I'll have back-ups. As you can see in my video, it makes very quick work of concrete and is a bit slower going through dense brick. But it will definitely cut through any masonry and is very good for cleaning out old joint work.
+9255	Industrial_and_Scientific_5	POS	5.0	GREAT
+
+2833	Industrial_and_Scientific_5	NEG	2.0	THE PHOTO OF THE PRODUCT WAS THE SAME AS I HAVE PURCHASED FOR MAYBE 20 YEARS.
+* This is strong glue and hard to get off once it is on a surface
+
+6882	Industrial_and_Scientific_5	POS	5.0	Fantastic product
+7744	Industrial_and_Scientific_5	POS	5.0	I guess no one is buying these for anchors but instead using them as snap caps.
+6395	Industrial_and_Scientific_5	POS	5.0	Accurate, easy to slide, and not bent, as others have said. Good enough quality for low-medium precision work
+
+6484	Industrial_and_Scientific_5	POS	5.0	This is excellent for the money and very good quality.  They even threw in an extra battery.
+ 2013 The Gorilla Glue Co., 4550 Red Bank Expy, Cincinnati, OH 45227; phone: 1.800.966.3458; web: gorillatough.com; Made in USA; single container UPC Code: 0 52427 50002 1.
+-----------------------------
+9961	Industrial_and_Scientific_5	POS	5.0	Saw one of these [similar] at a local plumbing supply store for 2x the money. Fit/function fine. Installed with no problems at all! Highly recommended.
+3152	Industrial_and_Scientific_5	POS	5.0	Permatex clear RTV. This is great stuff has many uses. The Price is Right and the shipping is fast.
+
+9920	Industrial_and_Scientific_5	POS	5.0	Good price on a comfit cuff.
+8395	Industrial_and_Scientific_5	POS	5.0	As described and sent to survive the carriers.
+1085	Industrial_and_Scientific_5	POS	5.0	As advertised
+I use this to jack up my RV (which is 16K pounds), and don't mind using a 20 ton to make sure I have "overkill".  When I have to work under the RV without a tire on, and have the luxury of being in my driveway at home, I tend to have a lot of redundancy for safety measures - for instance, if I take a tire off one side, I use two bottle jacks and two jack stands under the frame in various locations to make 100% sure there will be no failure.  Of course, I also chock the other wheels.  I don't want to trust any one, or even two, components for failure when my life depends on it.  When I am travelling, to save on weight and portability, I only carry the 12 ton with jack stands, and carry a block of wood or two for stability of the jack in case I am on gravel, dirt, etc.  I am extra careful until I get a jack stand or two under it on the road, I don't have the luxury of concrete, multiple jacks on the road..... but it is still enough.
+1935	Industrial_and_Scientific_5	POS	4.0	While not as transparent as I would have liked it's still better than opaque solid colored tape in many applications. Same adhesion qualities and physical characteristics that make duct tape so popular but the adhesive used on this tape seems to leave very little (if any), residue when removed. I've always been impressed with the quality of 3M products, especially their adhesives.
+3388	Industrial_and_Scientific_5	POS	4.0	I guess I didn't fully understand and perhaps I didn't read the product information completely. It said it was a foam but I expected a spray foam. What comes out is a thick foam snake between 1/2" and 1" wide. So please be aware of this before you buy.
+
+Also Note: Since I didn't buy this from Amazon, I have no idea how fresh their caulk is. I'm reviewing the product itself, as used when fresh.
+1933	Industrial_and_Scientific_5	POS	5.0	good
+324	Industrial_and_Scientific_5	POS	5.0	Easy on, easy off. I haven't used it much yet but it seems to works well for its purpose. Good price too.
+4988	Industrial_and_Scientific_5	POS	5.0	Nice!
+6396	Industrial_and_Scientific_5	POS	5.0	Bit pricey for a digital caliper but after using it for a while now I can't complain.  It was easy to use.  The buttons are clear and so was the display.  The company gave you spare batteries.  The carrying case was form fitting and although cheap looking does it's job well.  I've been wanting this kind of instrument for a long time after being tired of measuring pipe sizes or brake drums/discs with a ruler.
+
+1308	Industrial_and_Scientific_5	POS	5.0	WORKS FINE.....A PERFECT SIZE..
+
+5939	Industrial_and_Scientific_5	POS	5.0	Use it for my solar can heater for my solar power greenhouse . It handle heat and cold very well for the almost a year it been . I had to no repair to reapply the glass on top. It is strong and once it set it is in place .
+7005	Industrial_and_Scientific_5	POS	5.0	came on time and just as described
+
+854	Industrial_and_Scientific_5	POS	5.0	Nice, better then what I found at the local store
+9921	Industrial_and_Scientific_5	POS	5.0	Works great replaced one that was years old, and used at least twice a day. One improvement I have made to this one and my other one is to add a 3/4" Velcro circle right at the end of the strap were it lines up tight before inflating, for me that is near the inlet tubing.. This does two things it keeps the cuff closed when inflating for a good reading (without coming apart) and it keeps the cuff rolled nice and tight when storing in it's case.
+Also, I have no problem getting a #12 gauge copper stranded wire inside these even though they are designed for #16  #14 gauge wire. I've used these GB terminal spades for years without any issues.
+3559	Industrial_and_Scientific_5	POS	5.0	Great assortment for repair and build work for larger scale robotics.  Nice container and legend show the sizes.  Great price.
+6472	Industrial_and_Scientific_5	POS	5.0	This was just what I needed for precision 3D designs. It has been very reliable, and battery life is good due to its auto-shutoff.
+628	Industrial_and_Scientific_5	POS	5.0	A bit expensive compared to the cut-rate brands but this is what you want on hand if your time means anything to you. You never have to unwind and rewind because the tape failed to stick or conform to the shape of the object. I'll buy it again and recommend it.
+Number of steps: 13
+- use of 'throw away' batteries
+5046	Industrial_and_Scientific_5	POS	4.0	This fitting was a good quality fitting and I couldn't find any faults.  These brass fitting are overpriced in my opinion.  The price on this one was good in comparison to the others I found online but they should all be priced more reasonably.
+4578	Industrial_and_Scientific_5	POS	4.0	Works fine
+6384	Industrial_and_Scientific_5	POS	5.0	Well made set of calipers come with case and extra battery.  They are accurate for both inside and outside measurements. Would buy again.
+8264	Industrial_and_Scientific_5	POS	5.0	Diameter is right on size but when you remove rough surface it is undersized. Have to order 1/8" larger diameter to make the difference.
+1355	Industrial_and_Scientific_5	POS	5.0	This belt replaces one that was damaged when a zinc pot-metal motor sheave split and chewed it up in less than a minute of operation.  With a new cast-iron sheave installed, this belt should last a long time.
+7135	Industrial_and_Scientific_5	POS	5.0	I use these for special parts, I turn the ID and  OD on the lathe, they machine well, weld to ss with no issue.
+7686	Industrial_and_Scientific_5	POS	5.0	worked great for our screen door frame.  make sure you have the correct sized splining tool!
+8156	Industrial_and_Scientific_5	POS	5.0	I can't test the purity, but it does the job intended. I like it.
+4835	Industrial_and_Scientific_5	POS	5.0	Best ele. tape I've used.
+2415	Industrial_and_Scientific_5	POS	5.0	I saw some appliance movers using this when they brought my washing machine in and took it upstairs. They made it look easy. I bought one that night. First time I used it, I was amazed. Worth every cent.
+Down the middle:
+Wish it had a strap to lock closed
+2688	Industrial_and_Scientific_5	POS	5.0	If you are overclocking a processor don't risk using the thermal paste that comes with your liquid cooler or heatsink/fan combo. I used this on my i7 6700K processor with Corsair's H100i v2 and I can overclock the processor to 4.8Ghz at comfortable temperatures.
+5202	Industrial_and_Scientific_5	POS	5.0	Its caution tape
+1867	Industrial_and_Scientific_5	POS	5.0	Adds to my fastener collection and is specialized for my needs.
+3424	Industrial_and_Scientific_5	POS	5.0	The color is great, the size is nice, and it fits in the corner of our average-sized kitchen. We are able to throw all of our trash away easily and without making a mess. This type of trash can reminds me of the kind they use in professional kitchens. You have to purchase the lid separately but it's worth the price considering the quality. Not everyone needs a lid anyway. We like, we use it, and would buy it again if needed.
+1590	Industrial_and_Scientific_5	POS	5.0	Easiest caulk ever, matches both grout & sealant + no more crack
+Excellent adhesive qualities
+4548	Industrial_and_Scientific_5	POS	5.0	Great to store larger recipes
+9597	Industrial_and_Scientific_5	POS	5.0	They are from Fluke - Nuff -said.
+8829	Industrial_and_Scientific_5	NEG	1.0	Not  12X12 inches, It appears to be metric size (30cm) being passed off as 12 inch.
+7644	Industrial_and_Scientific_5	POS	5.0	Here is a side by side photo of this HTC-2LM compared to the HTS-2L model.  Both have extra long telescoping handles of the same length.  The only difference is that the HTC-2LM has a 2-1/4" diameter mirror and the HTS-2L has a 3-1/4" diameter mirror.  These inspection mirrors are so useful to have handy for the odd projects when you least expect you might need them, I bought both.  On the package it says these are manufactured by Ullman Tools in Connecticut.  In other words, this is Made in the USA and not Made in China - another plus!
+8253	Industrial_and_Scientific_5	POS	5.0	It shipped in a reasonable time in easy packaging with no surprises whatsoever.
+349	Industrial_and_Scientific_5	POS	5.0	aok
+403	Industrial_and_Scientific_5	POS	4.0	I'm doing a fiberglass car project, and these things leave much nicer edges than my normal pilot point bit sets. And even on un-masked gelcoat, this leaves minimal cracking. (Though I'd still recommend using masking tape, and cutting in towards the gelcoat).
+Mix equal parts from the 2 containers and it's ready to immediately apply.  Starts to harden within 10 to 15 minutes, and it's fully cured by the next morning.  I typically use denatured alcohol to help with the cleanup or to help smooth down the epoxy before it hardens.
+2602	Industrial_and_Scientific_5	POS	5.0	I LOVE THSI
+because the sole is usually still tighter to the upper and holds without the need for figuring how to
+817	Industrial_and_Scientific_5	POS	4.0	I like this kit. It seems a good value. The blister-pack it is packaged in arrived with the plastic separated from the cardboard over a length, which let some parts fall out, but they are all accounted for and some tape repaired the package.
+I noticed the price of these 3M Medical Masks have become a lot more reasonable without leaving out any of the great features about it. The two band straps hold it snuggly and evenly on your face without leaving any permanent facial disfiguration like those heavy respirators do. The inner material is soft and sealing on your face and doesn't build up moisture. The outer 'clinical' looking green material might be great for restricting fluids from absorbing into the mask and possibly being drawn into your lungs, it also restricts dust particles from accumulating and clogging. And equally as important, it already comes with the upgraded foam at the nose piece.
+2281	Industrial_and_Scientific_5	POS	4.0	I like this glue as it bonds really well to a lot of different types of materials but...
+
+4189	Industrial_and_Scientific_5	POS	5.0	I am a doctor who lives in Belarus. Bought this magazazine 8 varieties of surgical instruments, in an amount from 4 to 10. Total 49 pieces. I bought what was on sale and that weighed a little. Shipping cost is almost 3 times more expensive. To me this product came a month later, he was brought to me from the U.S.. I was pleased with it, good quality for this low price. Yes, I know better quality, but this quality is not two or three times more expensive, and at least ten times or more.
+MECP CERTIFIED PRO INSTALLATIONS
+
+1627	Industrial_and_Scientific_5	NEG	2.0	not great quality, spend the extra and get something that is good
+7896	Industrial_and_Scientific_5	POS	5.0	It is just what I needed in the appropriate quantity and price.
+9565	Industrial_and_Scientific_5	POS	4.0	Yes
+7664	Industrial_and_Scientific_5	POS	5.0	Does the Job!
+1922	Industrial_and_Scientific_5	POS	5.0	Rear panel in front of the bumper popped out.  2nd body part to do that.  This was excellent for a temporary repair, plus people don't notice it.
+7359	Industrial_and_Scientific_5	POS	5.0	Great liquid electrical tape. Can be used to insulate and protect electrical splices and connections. No worrying about water because it's waterproof. No problems with it getting raveled up like traditional electrical tape. will be buying more in different colors.
+5683	Industrial_and_Scientific_5	POS	5.0	Forget about fluorocarbon based lubes. I use this to lube the trip blade on my plow and it stands up to getting washed off. Yes it's ugly, but it gets the job done.
+2040	Industrial_and_Scientific_5	POS	5.0	Today I receive my order from amazon.com. Fluke TL 175 Test Leads 2 mm. Wow, I'm impressed with quality, No I don't have Fluke multimeter yet because I just can afforded for now. I have Heyelec what come with leads but leads are very stiff. And I decide to replace them with Fluke. Yes I see the difference. Fluke leads much nicer and made with silicon. I hope some day I will replace my multimeter and get a Fluke 87 V. But for now I have to use what I have not what I wish to have ;-)
+3063	Industrial_and_Scientific_5	POS	5.0	Excellent quality
+7768	Industrial_and_Scientific_5	NEG	2.0	Inaccurate O.D. 1/32" to large. Had to return.
+2218	Industrial_and_Scientific_5	POS	4.0	Great product that works like you would expect it to.
+
+
+you will not be disappointed
+
+- short life due to almost inevitable water damage
+The only problem is that Kroil is harder to find than the usual brands seen at the auto supply and hardware stores. So it is nice to know that it is available here on Amazon. Keep a can of in your work shop for those difficult stuck bolt problems and use the other common store brands for normal stuck bolt problems.
+1875	Industrial_and_Scientific_5	POS	5.0	not much to write , these are very good screws and make Kreg's system work really well; they replace all sorts joinery-- no need for biscuits or mortise and tenons, especially good joining table top lumber.
+2807	Industrial_and_Scientific_5	POS	5.0	The only compound I use on my system and customers performance systems. A little more expensive than other brands but I have trusted this stuff for years.
+1' 3.5mG
+3565	Industrial_and_Scientific_5	POS	5.0	Used small bits of this to fix a few broken items that were beyond repair with super glue. The stuff dries fast and very hard so work quickly. As much as is in the tube I will likely not need to buy more for a long while.
+
+The lid is sold separately, but I think it's worth it if there's any chance it might rain.
+4851	Industrial_and_Scientific_5	POS	5.0	GOOD PRODUCT
+6024	Industrial_and_Scientific_5	POS	5.0	Item as described.
+8554	Industrial_and_Scientific_5	POS	5.0	These are great for keeping track of little stuff. I use them mostly to keep resistors and capacitors sorted.
+However it just dropped from 5 stars to two when it jumped within one month from $5.83 to $14+ tax.  That's more than a 200% price hike and difficult to justify.  It brings it from the most reasonably priced product-- to one of the most expensive (with equal quality and less pricey brands on the market).  I have to question what warrants such a price hike.  When that happens I start shopping for alternatives.
+Everything else seems fine
+9586	Industrial_and_Scientific_5	POS	4.0	I regretted buying these a little bit, mostly due to the price. Not they they are not fine quality, but no better than something half the price. Keep in mind you will also need test leads with 4mm MALE banana connector on Both ends. No biggie there, just keep it mind. And the thing about back probes, is really you can do the same thing with piercing probes, and it is easier in my opinion.
+9753	Industrial_and_Scientific_5	POS	5.0	works great like a charm
+9115	Industrial_and_Scientific_5	POS	5.0	Great  product.
+9531	Industrial_and_Scientific_5	POS	5.0	Great little product, use it all the time and the price was great.
+7724	Industrial_and_Scientific_5	POS	5.0	This is duct tape as you remember it!  Don't bother with purchasing anything else. The Gorilla and Duck versions are trash. Pay a bit more and get more, dependability and function.
+
+
+2024	Industrial_and_Scientific_5	POS	5.0	Great deal. Just like the original. Quality made
+
+6522	Industrial_and_Scientific_5	POS	5.0	This is a great caliper, especially for the low price. It has a little LCD window that displays the reading as well as which mode its readings are in (inch or metric). It changes mode with the push of a button and calibrates the same way. I use mine to determine inside and outside dimensions of materials I use to create models and robotic devices. It takes an R-44 type battery and they send along one already mounted plus a spare. This is my second of these, the first was the victim of a heavy fanny belonging to a friend who didn't look before he sat. Frump, frump, frump.
+2887	Industrial_and_Scientific_5	NEG	1.0	I bought these to replace some of my old ones. I was using these today to test out some basic stuff and was getting a very unexpected result. I used my voltmeter to check connectivity on between the clips of the wire I was using and was surprised to see infinite resistance!
+9557	Industrial_and_Scientific_5	POS	4.0	Works great and my project came out great using this applicator with weld-on.
+When the item to be fixed is properly prepped and this product is properly used, it's historically proven that JB Weld will fix it.
+
+9183	Industrial_and_Scientific_5	POS	5.0	What can I say, there's really nothing NOT to like about these. Very good quality product. Levers that hold down the wires are really strong, and won't let go of the wires that are inserted.
+9495	Industrial_and_Scientific_5	POS	5.0	nice
+5977	Industrial_and_Scientific_5	POS	5.0	Just what I expected.  Easy to split with a razor knife for smaller cracks.
+3561	Industrial_and_Scientific_5	POS	5.0	good product good price fast shipping , thanks.
+8489	Industrial_and_Scientific_5	POS	5.0	Just what I expected.  Good product at a good price
+6611	Industrial_and_Scientific_5	POS	5.0	First can I have bought myself but I used to use it at work.  Absolutely love this stuff!  A must for any at home mechanic living in the northeast.
+2079	Industrial_and_Scientific_5	POS	4.0	I have had the cheap plastic ones (1 star) cheap metal from a discount tool place (2-3 stars) and Starrett (5 stars) this was $30 and is not bad. Much nicer than the cheap ones, but not as smooth as the $100  Starrett.  But it is accurate and works pretty good for the price.
+3170	Industrial_and_Scientific_5	POS	5.0	I bought this to hang a new shower dispenser, and it's working really well. I didn't even use the little tubes that came with the dispenser. Great product.
+If they would check the acid and alkaline balance for health they could find the problem 2 to 3 years ahead, by checking the pH of saliva and Urine.
+329	Industrial_and_Scientific_5	POS	5.0	It work's great!
+6729	Industrial_and_Scientific_5	POS	5.0	Good product
+1064	Industrial_and_Scientific_5	POS	5.0	Fasteners works great will buy again.
+8953	Industrial_and_Scientific_5	POS	4.0	I use high density plastic in place of teak and similar tropical hardwoods in "marine" applications and have found it easy to buy the size and thickness I need from Amazon. This material is easy to cut and to drill. The piece I received and others as well have been in pristine condition when I pulled them from the shipping box. Others have had problems but if I get a piece that is not right for any reason I know I can return it.
+7268	Industrial_and_Scientific_5	POS	5.0	Great stuff. Perfectly clear, easy to work with a scroll saw.
+6264	Industrial_and_Scientific_5	POS	5.0	got this for my toolbox at work. Glad I did. had to do some work on a machine and tripped the circuits breakers that the electrical guys called out.went back and checked the wires again to verify no power and the tester lit up.
+6641	Industrial_and_Scientific_5	POS	5.0	Best stethoscope I've ever used
+6823	Industrial_and_Scientific_5	POS	5.0	good products
+1833	Industrial_and_Scientific_5	POS	5.0	Thank you.
+3571	Industrial_and_Scientific_5	POS	5.0	I am quite pleased with this purchase and would gladly recommend this seller!
+5029	Industrial_and_Scientific_5	POS	5.0	I believe this was the perfect solution for my situation. I received the package on time and in good shape. I recommend this because the price was right and it fit perfectly.
+4188	Industrial_and_Scientific_5	POS	5.0	Great bargain. Fast service. Would recommend.
+4317	Industrial_and_Scientific_5	POS	5.0	Had to replace my old Panasonic microwave and so far this one is doing great.
+
+6485	Industrial_and_Scientific_5	POS	5.0	This caliber is used in my math class. My students measure & it helps explain metric. The easy to read digital format works great.
+6952	Industrial_and_Scientific_5	POS	5.0	Does what I needed them too
+1147	Industrial_and_Scientific_5	POS	5.0	Superb.
+9334	Industrial_and_Scientific_5	NEG	2.0	1/4 inch all 20 no 28. Contacted seller but only got partial
+All in all, I'm very happy with this little vacuum.  Highly recommended for small homes or apartments!
+8960	Industrial_and_Scientific_5	POS	5.0	This stuff is great.  I haven't had a single bad joint since using it.  You must wipe off the pipe externals and run water through through the pipe to remove the acid when finished.  I also got this in a scratch on my finger--OUCH! Do yourself a favor and get a pack of small plumbing acid brushes.
+5937	Industrial_and_Scientific_5	POS	5.0	wear gloves
+3337	Industrial_and_Scientific_5	POS	5.0	The only gripe I have about this lift is the handle to pump it is two peices.  I'd love to have a single piece so I don't have them falling apart while I'm trying to lift something.  Very very minor but that's the only gripe I have.
+7378	Industrial_and_Scientific_5	POS	4.0	Using this liquid is great in areas where tape is not possible.
+
+8693	Industrial_and_Scientific_5	POS	5.0	I loved this stethoscope until it was stolen.  I thought sound-wise it as as good as my Littman for what I need it for.  It is definitely cheaper than the Littman though.  One of the caps came off instantly within the first week.  It was a beautiful and thick stethoscope, and I liked the sound.  I bought this one specifically, because I thought no one would steal it, but alas it was too tempting for someone.  Got lots of compliments and some people even asked if it was real gold, or copper-plated!
+3186	Industrial_and_Scientific_5	POS	4.0	I got this in two days with prime shipping. I had some need to fill some seals in my window of my car. I was tired of the wind noise. This was the cure, also the back of my outback wagon started to leak. I found where the gasket like seal was lose and used this to reglue.
+
+The main factor behind my decision to purchase this is that it is from a name brand.  Package lists the
+9644	Industrial_and_Scientific_5	POS	5.0	Good tape, strong and very sticky.
+6127	Industrial_and_Scientific_5	POS	5.0	Perfect for hanging some power tools on my pegboard! Pegs are long and study, just what I was looking for!
+5-star:  does the job well, with extra advantages
+822	Industrial_and_Scientific_5	POS	4.0	Handy, easy to use, makes fantastic grommet holes for tie downs and keeping your material neat for screw holes and the like.  Replacement of grommets and adding more tie downs to canvas and tarps is a breeze with this kit.  Perfect holes, and ease of installing the brass grommets makes it look professional!!
+Excellent adhesive qualities
+Ali Julia review
+616	Industrial_and_Scientific_5	POS	5.0	Scotch Super 88 Electrical Tape, .75-Inch by 66-Foot by .0085-Inch  This is a thicker tape.  I use when I know i need that extra strength.
+1861	Industrial_and_Scientific_5	POS	5.0	These worked great for my use.  I also found spaxx screws at home depot which work, but risk over drilling into the wood.. these don't have that problem.  So, on cuts I don't care about I carefully use spaxx, and the screws that count I use the Kreg screws.
+
+3780	Industrial_and_Scientific_5	POS	5.0	works well, no complains
+I wouldn't use it on electronics because of that.
+3662	Industrial_and_Scientific_5	POS	4.0	Works great but it's a little stiff.
+4153	Industrial_and_Scientific_5	POS	5.0	Wish they were around 20 years ago.  Best panel mover ever.  Try it once and you're willing to pay whatever it costs.  I'd heard rave reviews so I bought one.  Not sorry.
+6901	Industrial_and_Scientific_5	POS	5.0	Package contains 6 different sizes, and just used some this past weekend.  They do what they say they will do.
+9333	Industrial_and_Scientific_5	POS	5.0	husband happy
+
+6338	Industrial_and_Scientific_5	POS	4.0	Great. One issue is screen contrast too low at certain angles. Might just be battery.
+9640	Industrial_and_Scientific_5	POS	5.0	Just right.
+4152	Industrial_and_Scientific_5	POS	5.0	I built a panel lifter for use with plywood but it was limited in several ways that this gripper isn't. Used this as soon as I received it and the other lifter...is lonely in the corner now.
+5001	Industrial_and_Scientific_5	POS	5.0	It has a 1" barb and 3/4" threads.  The metal is thicker than the Lasco part.
+165	Industrial_and_Scientific_5	POS	5.0	<div id="video-block-R3ACEOTGM9B3VL" class="a-section a-spacing-small a-spacing-top-mini video-block"></div><input type="hidden" name="" value="https://images-na.ssl-images-amazon.com/images/I/C1nY6-1yeSS.mp4" class="video-url"><input type="hidden" name="" value="https://images-na.ssl-images-amazon.com/images/I/71gJrAZHMuS.png" class="video-slate-img-url">&nbsp;This is my go-to caulking for most construction and sealing jobs.  It is reasonably priced, easy to apply, long lasting, paintable, and cleans up with water.
+2744	Industrial_and_Scientific_5	POS	4.0	Works well but not much there
+6286	Industrial_and_Scientific_5	POS	5.0	For some stupid reason I've always shied away from digital calipers. For my reprap work I needed metric and picked this up. LOVE IT. I wish the plastic panel were more scratch proof, though. One time I needed to "get in there" gouged it.
+3282	Industrial_and_Scientific_5	POS	5.0	This is the zipline of my zipline install. 250 ft of this is very heavy, and ~120 ft that is the length of my zipline was much heavier than I thought, but that is probably due to me being on a ladder at the time. If I'm doing this again, I'd attach the higher end first, and then attach the lower end while standing on a firm ground. I think it's breaking point is 1500 lbs, which is actually the lowest rating of all the other parts of my zipline.  Still, it should handle a kid weighing 50 lbs easily. Can't overbuild enough.
+I use the white and clear mostly, unless there is a direct color match with something like pre-painted siding, for example.
+Would buy again if needed.
+5442	Industrial_and_Scientific_5	POS	5.0	Built like a tank...very strong and very sturdy.
+have the longer edge rest against the garage door when it closes.
+1554	Industrial_and_Scientific_5	POS	5.0	It's foam.  It's sticky on one side.  What else can I say?
+4032	Industrial_and_Scientific_5	POS	5.0	So nice I bought it twice! Very versatile. It holds the door open yet is easy to remove. Best of both worlds. Would buy a third time if needed.
+4716	Industrial_and_Scientific_5	POS	5.0	Works perfectly 
+3022	Industrial_and_Scientific_5	POS	5.0	Very good
+9228	Industrial_and_Scientific_5	POS	4.0	Looks to be of high quality with the exception of the first two threads don't appear to be as sharp and clean, have not used it yet and will update the review
+9722	Industrial_and_Scientific_5	POS	5.0	I always keep these on hand.  So easy to use and work just as intended.
+1517	Industrial_and_Scientific_5	NEG	2.0	I needed these for installing LP SmartSide-12" width. The "hook" end of these were not wide enough for the SmartSide (James Hardie is slightly thinner), and they would not work for anything BUT a 1 1/4" overlap.
+6128	Industrial_and_Scientific_5	POS	4.0	Work well
+hardware stores. This junk is just not worth the frustration!
+[Not Amazon listed atm]
+1634	Industrial_and_Scientific_5	POS	5.0	Outstanding product. Heavy but accurate.
+8526	Industrial_and_Scientific_5	POS	5.0	it is what it is.
+In hardwoods, I found step drills to be a quick and effective way to remove the ragged edges and slivers on the back sides of freshly drilled holes. You do need a light touch, and a bit of practice to obtain consistent results.
+1126	Industrial_and_Scientific_5	POS	4.0	Good
+Super-Glue (Krazy Glue):  Super-glue is very strong, rigid, and fast.  In many ways it is similar to 2-minute epoxy---except that no mixing is required.  Although very hard, super-glue is brittle, and so, is not recommended for flexible objects.  Super-glue is hazardous in that it can easily glue fingers (etc.) together.  Previously, I used super-glue frequently on objects (e.g., jewelry) when a clear bond was required---however, Goop is better for such applications, and clear epoxies have become available.  Opened super-glue keeps poorly, even in tightly sealed glass containers---so I recommended packages of multiple very small tubes.&nbsp;<a data-hook="product-link-linked" class="a-link-normal" href="/BAZIC-Super-Glue-3-grams-0-10-ounces-6-Per-Pack/dp/B003BSF7ZG/ref=cm_cr_arp_d_rvw_txt?ie=UTF8">BAZIC Super Glue, 3 grams 0.10 ounces, 6 Per Pack</a><a data-hook="product-link-linked" class="a-link-normal" href="/Krazy-Glue-KG92548R-Instant-Krazy-Glue-All-Purpose-Brush-0-18-Ounce/dp/B000BQSFSM/ref=cm_cr_arp_d_rvw_txt?ie=UTF8">Krazy Glue KG92548R Instant Krazy Glue All Purpose Brush 0.18-Ounce</a>
+2796	Industrial_and_Scientific_5	POS	5.0	I swear these look like they are getting smaller >> LOL
+2710	Industrial_and_Scientific_5	POS	4.0	Never had to use, but I was told this is quality paste.
+497	Industrial_and_Scientific_5	POS	5.0	As expected.  Good deal.
+Our situation is this. We have a Home Depot type of waterfall with three levels. The bottom level is about 30" wide, 15" tall, and sort of a tiered circular shape, all concrete and quite heavy. We've had it for years but it has leaked for the past year or so. We lose about 1" of water a day. I could not find out where the leak was so I wanted to spray the entire inside of the bottom section to seal up any small cracks or perhaps porous sections where the water might seep through. I prepared by taping off the top level where the water line should be. I wanted to coat the entire area below the water line. This is not a proper application for the Great Stuff product as it does not spray but rather ejects a tube like foam.
+They come in a really nice case they came in and make for easy retrieval from your truck when you need them.
+
+992	Industrial_and_Scientific_5	POS	5.0	Works as stated
+... and so much more to come.
+
+Also, you can get it off if you really need to, it won't mess up the surfaces of what it's gluing.
+BUT, this low of a price means you're not getting the functionality of a high end machine. For example, the steam is pretty wet, and you'll also get a big dribble of water when you start up after pausing for a few moments. The tank is rather small, and you can't add more water without letting it cool down first. The attachments are OK in terms of function, but wear at a fairly fast rate. Build quality is good for the price paid, but you'll need to take care that you don't damage the wands since they are all plastic.
+None of it seems to work like it did 20 years ago.
+6784	Industrial_and_Scientific_5	POS	5.0	Completely the best bang for your buck and great sound quality too, both on the small drum for my newborns heartbeats and the large drum for my wife when she gets a cold. It helps me distinguish between either a nasal congestion cold or were she actually has phlegm in her lungs as you can clearly hear the sound difference.
+If you follow those steps, you will see a massive improvement in your core temps. Just remember that heat dissipation is achieved by the fans in your case and heatsinks, not the compound itelf. The compound simply allows for a much better transfer of heat from chip-->heatsink. I swear by Arctic Silver, and I promise you it works if you use it correctly.
+4577	Industrial_and_Scientific_5	POS	5.0	The nuts worked very well. Will buy again.
+5407	Industrial_and_Scientific_5	POS	5.0	Helpful
+Unfortunately I could not find a better quality 2" fixed wheel with same load capacity even if I wanted to pay more.
+and this one is no exception.  It's nothing to do with this bit, they
+
+Slides smooth, ID & OD caliper surfaces are even & smooth, gives accurate measurements.
+8744	Industrial_and_Scientific_5	POS	5.0	Great screw set, worked so well. I always pre drill all the holes in my projects so i cannot comment on how well they work with no pilot hole.
+- Many radio control cars, planes, etc. = 2.45GHz
+2331	Industrial_and_Scientific_5	POS	5.0	As all Hornady products,  This is a great lube.  Works fantastic
+
+1853	Industrial_and_Scientific_5	POS	4.0	good!
+2776	Industrial_and_Scientific_5	POS	5.0	works great!
+6267	Industrial_and_Scientific_5	POS	5.0	The on/off button is a pain in the but, be safe always test it before you actually use it, make sure the batteries are working. Typical good Fluke quality.
+NFA1000 3D 5Hz-1000Hz ($2400)
+
+9287	Industrial_and_Scientific_5	POS	5.0	good assortment of sizes
+5504	Industrial_and_Scientific_5	POS	5.0	great addition to a toggle switch if it gets any moisture on it.
+I do like this companies products, I own many of their storage shelves in my pantry.
+
+985	Industrial_and_Scientific_5	POS	5.0	[Sold by: Amazon.com LLC] Bought to use with SENCO FinishPro 18MG, 2-1/8" 18-Gauge Brad Nailer.  Ran a few different sizes and I had no problems.
+5934	Industrial_and_Scientific_5	POS	5.0	This stuff is unbelievable.  It will glue anything to anything and remain flexible.
+9212	Industrial_and_Scientific_5	POS	5.0	Seems amply rugged.  I've swapped pads and disks only about 15 times so far, but have noticed no loss of adhesion of the hookit surface.  Seems to work well with all the pads and disks I've tried.  Maybe too well, it takes some finesse to get a foam pad off without tearing the foam.
+2646	Industrial_and_Scientific_5	POS	5.0	Always Great
+
+
+2502	Industrial_and_Scientific_5	POS	5.0	Does the job great.
+6210	Industrial_and_Scientific_5	POS	5.0	Excellent product!
+6775	Industrial_and_Scientific_5	POS	5.0	This is good quality, if you need one, this one will do you just fine.
+
+1263	Industrial_and_Scientific_5	POS	4.0	I just used a pair to install crown molding.  Now, I'm wondering how I would have done the job without these handy helpers.  Very impressive!  I'm not concerned about the strenght of these supports for crown molding.  Still, I would not put much load on them fully extended - maybe 10 pounds.  Fully retracted, they are quite strong.  There were no instructions, cautions, or specifications packed in the shipping box.  I thought this to be very odd as manufacturers are pretty cautious about misuse of their products.
+3837	Industrial_and_Scientific_5	POS	5.0	great as usual
+4247	Industrial_and_Scientific_5	POS	4.0	Good quality and a good price.
+3446	Industrial_and_Scientific_5	POS	5.0	as described
+871	Industrial_and_Scientific_5	POS	5.0	works
+7541	Industrial_and_Scientific_5	POS	4.0	Used it to put a ball valve in a cheap beer brewing kettle.  Does the job.
+9152	Industrial_and_Scientific_5	POS	5.0	These are seriously BEEFY.  Thick, strong, and look great too.  I'd buy these again for sure!
+7275	Industrial_and_Scientific_5	POS	5.0	I used this for the door on a jewelry cabinet.  Easy to cut on a table saw with a fine tooth blade.
+1530	Industrial_and_Scientific_5	POS	5.0	Good stuff, but like any other glue, you can stick things together that you don't intend to, like fingers, clothes, whatever is near the glue. It does take longer to set than the super glue type products though.  I needed to glue a kitchen cabinet knob back on and after getting smart and gluing then taping it to the cabinet door with duct tape overnight, it worked great.
+2006	Industrial_and_Scientific_5	POS	5.0	The OEM probes that came with my 20 year old Fluke 10B DMM finally gave out. After searching Amazon I found this set of Fluke probes that surprised my by having the 'needle' point tips that are useful for piercing through the conformal coating normally found on PCBoards. It also included to snap-on covers that limit the exposure of the metal probe tips. This is useful in that is limits the possibility of one wire conducting unintentionally to another wire in a crowded junction box or electronic chassis.
+It does help me relive my glory days as a busboy...
+3064	Industrial_and_Scientific_5	POS	5.0	Fast Shipping Item as described Thank you
+
+7891	Industrial_and_Scientific_5	POS	5.0	This rod is pretty much exactly what they say it is, and was exactly what I expected to get. Not much else to say.
+5138	Industrial_and_Scientific_5	POS	5.0	Great!
+800.624.4320
+1163	Industrial_and_Scientific_5	POS	4.0	Worked great! Thank you.
+7996	Industrial_and_Scientific_5	POS	5.0	How do you rate copper rods? They were for a custom project and they worked well for my intended usage.
+9194	Industrial_and_Scientific_5	POS	4.0	Seems durable, product just as described.  Hard to see through until I cleaned the lense and specula.
+
+
+Irwin Item #: 10231
+716	Industrial_and_Scientific_5	POS	5.0	I used this tape to seal the security camera video and power connections and it worked better than expected. After using on a few connections and checking on it 20 minutes later it had fused together nicely.
+850	Industrial_and_Scientific_5	POS	5.0	These things shed like crazy, but they work AWESOME.  Such a time saver over drill powered brushes.
+9732	Industrial_and_Scientific_5	POS	5.0	Awesome Purchase.  Exactly what I wanted.
+413	Industrial_and_Scientific_5	POS	5.0	Used this to add eyes to those cheap tarps.  Works well.
+5473	Industrial_and_Scientific_5	POS	5.0	Just A giant version of the smaller bottles that come with the testing kit or ph up/down kit. It comes out to be 8 of those smaller, dropper style bottles. This larger 8oz version does not have any dropper on it.