query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
Will the top shelf fit a 18 inch by 14 inch turntable> | Probably! I don't have a ruler out, but I have my turntable on a middle shelf. |
Will the top shelf fit a 18 inch by 14 inch turntable> | Top shelf is 15 from front to back and approx 27" from side to side the unit should be stabilized to keep it level and steady on any floor that isn't dead flat.There is an attachment with the unit for a wall attachment if needed. |
Has anyone used the UTG 1 inch mount w/a leatherwood camputer rifle scope which is an auto range/trajectory I will mount on a AR15 with a fixed front sight. W/O the mount I worry the front sight post will interfere with the auto range/trajectory scope. | I used this to mount a red dot for the same problem that you are describing. The AR I mounted it on has an integrated front iron sight. Like you are describing it interferes but I am not going to be the fool that screws with a iron sight from the SigSauer factory. This rail perfectly raises the sight just above the front sight so that the sight is usable and not a problem. This is definately the way to go. Hopefully I have answered the question let me know if not. |
Is this elliptical self powered, or do you have to plug it in? | You plug it in for the display panel, and so that you can change the angle and pressure you wish to use. But you use your own power to make it move. It doesn't move on it's own. |
Is this elliptical self powered, or do you have to plug it in? | It is self-powered in the sense that your body motion brings about the machine's motion, but it is an electromagnet in combination with the elliptical's flywheel that allows you to vary the resistance in your workout and thus gain the greatest benefit from using the machine. All the programs and workout analysis tools are built around an electronic unit mounted at chest level, so they of course must have electricity to work. In short, yes, you have to plug it in to really use it properly. |
Please excuse me if it's rude, but will it fit nikon d5300? I noticed it's slightly smaller than canon t3i since the other said that canon does fit in a large one. This is the cheapest waterproof bag I could find with good padding, so I'm trying to... | Unfamiliar with your camera size, however, if it's same or smaller than my Cannon EOS, than it will fit. If you will be putting only your camera with the factory lens, you will have limited extra storage, however with a zoom, you will have no space & will need an extra bag or back pack to carry your accessories. I would say the case isn't water proof but water repellent, also, there is a Velcro compartment in the back of the case that has a pull out cover which I think why the manufacturer is making its waterproof claim. Overall, for the dollar amount, if your carrying only your camera, with minimal accessories, it's well worthed. |
Does this model have artists pre-sets or do you have to buy the more expensive version to get those? | It does not have artist presents, but has multiple options for chorus, flange, reverb, echo, delay, etc. that you can adjust yourself. It also has a self-tuner (which I didn't know and bought one....then I also found there was a free guitar tuner app for your phone!) |
Does this model have artists pre-sets or do you have to buy the more expensive version to get those? | Unfortunately, this model lacks that feature. You'll need to invest in a more expensive model. |
Does this model have artists pre-sets or do you have to buy the more expensive version to get those? | This amp has a hum which you can not eliminate. I my opinion the hum out weights the pre-sets.I was not happy with it, so I returned it. |
Does this model have artists pre-sets or do you have to buy the more expensive version to get those? | That's why they built the tone of four sought-after amp tones (Clean, Crunch, Metal, and Insane), six effects, and loads of presets into the Line 6 Spider IV 15 combo! You get it all: vintage and modern amps, effects, even a huge collection of presets crafted by top players! That said, this is a practice amp. It does not have the readout of the different presets and is not powerful enough for performance use. |
Does this model have artists pre-sets or do you have to buy the more expensive version to get those? | You can go online to Line6.com to get the settings to adjust the amp to certain artists and songs but they aren't something you can select on this version of the amp itself. |
Has anyone used this liquid cooler for a graphics card? | Rexer, my apologies. I misread your question. I mounted this beauty on my cpu and not my graphics card. Sorry. But hey, like you said, duct tape fixes almost anything! :-) If you could figure a way to hold the heat sink in place, I know for a fact it would do the job. Great unit. |
Has anyone used this liquid cooler for a graphics card? | Yes, and it is awesome. My CyberPower Custom computer now runs so cool with the Thermaltake! Trust me, you will be impressed with your temps! Oh, did I mention that it is super quiet too? It is. |
Is this bigger or smaller than the BK 16/17? | The handles are different. This is a "False" full tang. I forgot the exact term for what you call it - it is "Full tang" but not a "true" full tang. I bought this to hold on to - Go with the BK 16 or 17 if you want to beat the heck out of it since they are both true full tang knives. This one is too handsome to beat on. |
Is this bigger or smaller than the BK 16/17? | Don't know. I have not seen/handled any bk knives. But it is smaller than a standard ka-bar usmc knife. |
Is this bigger or smaller than the BK 16/17? | I'm sorry it took me so long, this message had been sent to my spam folder. This knife is SMALLER at 5 1/4". Hope this helps :-) |
Is this bigger or smaller than the BK 16/17? | The blade is slightly longer (than the BK) but the handle is a bit crowded, for larger hands. ... The flare, at the rear, tends to make my meaty mits feel a bit "bunched". ... Just fine if your hands are thinner (more narrow). ... There ARE better options and I think that the BK16 is one of them. ... If you can afford it, nothing beats the TOPS BoB Fieldcraft Knife. ... The Mora Bushcraft Black (with or without the enhanced sheath) is a great option. ... The Condor Bushlore and the Condor Basic-5 Inch are both very adequate. ... I carry the TOPS BoB Fieldcraft and the Mora Black as a reserve knife but, to be totally honest, I use my Spyderco Endura4 FFG or my Mora 840MG Companion for any tasks which they can handle. This saves my better blades for the things that ONLY they can handle. |
Is this bigger or smaller than the BK 16/17? | I don't own the BK 16 or 17 but it appears the blade on the Mark 1 is slightly longer at just over five inches. The big difference for me was the handle as the Mark 1 handle can be used as a tool/hammer with it's pommel style end cap. Over all the knives are very close in over all length. |
Does it store drum patterns? | Yes - either patterns made from those already programmed in or ones you programme from scratch. Forgot how many - but certainly enough to do a three hour gig. |
do you have to assemble them? | Yes - not the lantern. There is a square wick that you need to attach to a metal frame at the opening. Very simple. |
do you have to assemble them? | Yes, you have to assemble the fuel pack. Be careful with these.....one of them caught fire before I could launch it and another on caught fire mid air. I eould not recommend these. There are others out there with MUCH better quality. |
do you have to assemble them? | yes, you have to put the wick on and wrap a wire around it. there are other lanterns that don't require that . . . |
do you have to assemble them? | Yes..without directions and there is NO wire ? Lame product and lousy in that there are no safety instructions nor instructions of any kind. Seems that wire would be the way to go...All i received is a paper latern with some type of thread at the bottom...a loop in the thread which I imagine is pushed through the hole in the wax block. |
Switch from headphones to speakers: Does this mean that every time I want to listen speakers I will need to unplug the charging base. | You need a multimedia switch. Check out this site: http://www.cyberguys.com/templates/SearchDetail.asp?productID=2696 |
Why it takes so much longer to bake with? | It does not, if you slightly preheat the pans. I just set them on the top of my range for a moment, just until they feel slightly warm. Then the bread rises and bakes very nicely. Also preheat oven. Mine will take about 25 to 30 min. at 400 degrees. |
Why it takes so much longer to bake with? | This is just a guess - since you raise the dough in the pan, once baking is started, the pan has to come up to temp. The pay-off is that the bread will have a more uniform and textured crust. I personally, would prefer the few extra minutes oven time to going back to traditional, or even silicone bread pans. I spend considerable time raising, punching down, kneading, raising etc., that a bit longer in the oven is a small price to pay. Hope this helps. |
Why it takes so much longer to bake with? | How long are you baking it for? And what are you baking, different types of breads take longer, for plain white bread it only takes 40 mins to an hour with the cast iron. Also cast iron you have to preheat if your doing something like banana bread, but regular bread you have to let rise in the pan prior in a preheated oven(usually at 170) so that could be your problem. |
Would this be good for climbing roses in a pot? | I don't see any problem, unless rose stems are too stiff to train around legs. I use them for mandevilla vines ... cold probably do the same for clematis. |
Would this be good for climbing roses in a pot? | Probably although I've never tried it. I have a honeysuckle vine on mine and love the look. |
Would this be good for climbing roses in a pot? | My guess would be yes. I have Purple Passion Vines in a pot and they are doing very well, so I am thinking that the climbing roses would do well too. |
Do they make a lid to fit this appetizer server? | Hello C-Ray, I am sorry, we do not make a lid for this item at this time. I will pass along your suggestion. Thank you. |
can the cover folds back. I got the Kindle cover and I cannot fold the back making it hard to hold with one hand. My hands get so tired. | Yes, the cover folds all the way to the back. I have had no problems holding it. |
can the cover folds back. I got the Kindle cover and I cannot fold the back making it hard to hold with one hand. My hands get so tired. | Yes, I can fold mine back easily to hold in one hand. Folded back is how I use it 95% of the time. It's pretty comfortable texture for your hand too, not slippery, or hot, or weird. |
can the cover folds back. I got the Kindle cover and I cannot fold the back making it hard to hold with one hand. My hands get so tired. | Yes, the cover does fold back on itself and it's easy to hold in that position. It's light weight and I like the brown color I got. |
would this make a vibrating noise in a wooden shelf under the tank? (66gal version) | I have two of these under my stand sitting on a tile floor with no vibration. This filter has 3 or 4 (can't remember exactly) rubber feet on the bottom to keep any noise to a minimum. My stand has doors on it and with the doors shut I can't hear any noise, but with the door open i can hear the motor a little. I have had nothing but great experiences with these filters. Highly recommend |
would this make a vibrating noise in a wooden shelf under the tank? (66gal version) | Mine absolutely silent. I can hardly hear any noise at all from this puppy with my ear touching it. I haven't noticed or felt vibrations from it either. |
would this make a vibrating noise in a wooden shelf under the tank? (66gal version) | No this filter system makes no noise on shelving unit you cannot tell it's running short of the water flow at the top of the tank. It is a superior product! |
DOES THIS FILTER FIT KENMORE NANO HEPA MODEL 85501 | The Sears unit looks pretty close, check the dimensions, to me it looks like the sears filter also. |
will this rack hold 1.5L bottles? | I don't have a 1.5 L bottle here for testing, but the openings are a shade under 4" X 4" and a 2 liter soda bottle does NOT fit. My guess is that the answer to your question is no, but the measurements should help you determine that for sure. |
will this rack hold 1.5L bottles? | Well I use regular wine bottle, so? But the opening is 3 7/8 x 3 7/8, if that helps you any. But the rack itself is solid and looks vary nice. Well built. |
will this rack hold 1.5L bottles? | Yes, it does. In fact it is my only rack that does. It holds champagne bottles too. |
will this rack hold 1.5L bottles? | each square is about 4x4 - maybe a 1.5 liter would fit. I don't have any to compare. sorry |
will this rack hold 1.5L bottles? | I just tried one and the answer is no, it will not accommodate a 1.5L wine bottle. |
I opened my KeyGuard easily but now it won't close. It seems like the latch isn't going down all the way. Why won't it close? | When you put the code in and open it do not release the latch. If you do you must put your code in again to get it to close and lock right. |
I opened my KeyGuard easily but now it won't close. It seems like the latch isn't going down all the way. Why won't it close? | you must re-enter your code each time you open & again to close the the door as outlined on the instruction sheet supplied with unit. |
I opened my KeyGuard easily but now it won't close. It seems like the latch isn't going down all the way. Why won't it close? | I had the same problem but couldn't figure out what the deal was so I stopped using it |
I opened my KeyGuard easily but now it won't close. It seems like the latch isn't going down all the way. Why won't it close? | You need to enter code again and push down on release button (as you did to open door) and close it let go and it will lock, it is a safety feature so you remember to lock it back up. |
I opened my KeyGuard easily but now it won't close. It seems like the latch isn't going down all the way. Why won't it close? | Sometimes it gets stuck but if you push the bottom middle button down it will reset the buttons then you can put your code in and the hold the lever down and close it you have to enter your code in to open it and then reenter the code to reclose it |
I opened my KeyGuard easily but now it won't close. It seems like the latch isn't going down all the way. Why won't it close? | Try clicking any numbers to remove the code or zero-out the code that you entered. Then try again. I found the latch difficult at first try, but fine afterwards. |
I opened my KeyGuard easily but now it won't close. It seems like the latch isn't going down all the way. Why won't it close? | The code needs to be entered every time you want to release the cover, whether opening or closing it. So you have to put the code in again to close the box. Not sure if you tried that. |
can a 6ft 4in man fit in this? | Probably, although a zipper side will help. I'm 5'4 and have to bring my knees to my chest in order to get in, but once inside the sack I am very comfortable. |
Does this gel pack need something between it and your skin? | Yes. The instructions on the pack are to use a sleeve or thin cloth towel. I usually just use a terry cloth hand towel. In any case, I find this more comfortable (or comforting) than a slick plastic surface. I've used these gel packs for many years. They are surprisingly durable if you treat them gently, as instructed. |
Does this gel pack need something between it and your skin? | Yes. It is very cold, I like to use a pillow case. They also sell covers for the packs. |
Does this gel pack need something between it and your skin? | You should always have a thin layer of something between cold and your skin,remember this gel pack is ice cold! |
Does this gel pack need something between it and your skin? | My foot was always wrapped because of being broken then having surgery and it got really cold. If your area is bare I would lay a wash cloth or something first because it does get frosty on the outside and it is cold. |
Does this gel pack need something between it and your skin? | Yes. They usually come with a cover. But I also use a pillowcase, more washable. |
Is this tent new and did it come with any warranty? Also can you put a heater in the tent? | It is new. I'm not sure about the warranty. I have not put a heater in the tent but I suppose it's possible if you keep far enough from the sides. We have used this tent for a large event for 2 years without any problems. |
Is this tent new and did it come with any warranty? Also can you put a heater in the tent? | It is new and it didn't come with a warranty. We put a heater in it but it didn't seem to heat it up very much. But we really like it. |
Is this tent new and did it come with any warranty? Also can you put a heater in the tent? | the tent bought was new.I don't recall seeing a warranty. but its very strong. we are happy with our purchase. we used it in the summer and did not need a heater but i see no reason why you cant put a heater in. |
Is this tent new and did it come with any warranty? Also can you put a heater in the tent? | The tent is new. I don't believe there was a warranty, but I'm not sure. All I know is that we had one big wind and the top blew off and was ripped up. Most of the poles were bent. We use ours at a clubhouse. We fixed the poles, so all we have left is the frame. |
Is this tent new and did it come with any warranty? Also can you put a heater in the tent? | The tent is new! I don't remember if it had a warranty, and yes you can put a heater in it! I wouldn't recommend a tall standing heater, but I used a propane heater, and it worked fine! We live in VT and have used it for several events! We love it.. It took 2 of us about 2 hours to set up....including the sides. |
Is this tent new and did it come with any warranty? Also can you put a heater in the tent? | It is new. We had an event on a chilly day and put a small space heater in there fine. I am not certain about the warranty. |
Is this tent new and did it come with any warranty? Also can you put a heater in the tent? | This tent is new. You need to check in the warranty--it's limited. You can put a heater in this tent but it probably should be centered. This is a great tent and we have used it quite a bit. A word of advice: put up the tent a day or two before your event to air out the plastic odor. Also, put the top on prior to raising both sides. All the sun to warm it for about 30-45 minutes before you put the fasteners on. It takes two of us to put this up. Three is better but two people are enough. |
I do not want a door. I plan a partial tiled wall with a walk through on the opposite end. Will this work or will the threshold make a tiled wall diff | It should work fine. You should not construct your wall until you have the base in place. |
what pieces are in the 16 piece dinnerware set? | 4 large flat bowls, 4 salad plate, 4 mugs, and 4 large plates. I have two sets. I ordered 8 cereal bowls in different colors because we like that kind of bowl for most things. The flat bowls are great for salad, stews, chili, and chowders. We use the salad plates more than the dinner plates. We like the size better. I really like these dishes. I hope this helps. I don't regret the purchase. |
what pieces are in the 16 piece dinnerware set? | 4 coffee mugs (one came broken), four soup plates and four large plates. Beware: the large plates are so large that they wont fit in our dishwasher machine. Its a really big and heavy dinnerware set, but it looks great of course. |
what pieces are in the 16 piece dinnerware set? | I believe there are 4 dinner plates, 4 cereal bowls, 4 sandwich plates and 4 mugs. They were a gift to my daughter as the second of 2 sets and since the original plates began to show wear after minor use she did not open the second shipping. I hope this helps. |
what pieces are in the 16 piece dinnerware set? | 4 mugs, 4 deep plates (bowls), 4 small plates, 4 large plates. Note: large plates are very big, make sure they fit in your cabinet |
what pieces are in the 16 piece dinnerware set? | http://cookware.lecreuset.com/cookware/product_16-Piece-Dinnerware-Set_10151_-1_20002_10168_24076 |
Is this adaptor also for Sony Cybershot digital cameras? I only read about camcorders. I need a battery charger for my Sony Cybershot DSC-HX100V camera. Thanks | This is the corerct power AC to charge the battery of your Cybershot DSC-HX camera. |
Is this a typo? Isn't this supposed to be for 900 tablets for 8 oz package for 36.95 not 250 tablets like it shows here???? | what I meant to say is 900 tablets/8oz packet/36.95 is correct but there is some problem... (continue as written the 1st time; sorry I'm tired) |
Is this a typo? Isn't this supposed to be for 900 tablets for 8 oz package for 36.95 not 250 tablets like it shows here???? | 900 tablets/8oz packet/36.95 but there is some problem with this seller because twice I ordered this & received a 4oz pack but was charged 36.95 so I informed Amazon & they refunded my cost. The product is good but there is some mess up with ordering it & I'm not sure what I'm going to do when I need to order again. Hope that helps |
How much does it weigh when wet? | I have used this jacket for 3 years and I love it. our water aerobics class is outside and it works great. it is not heavy because it is the light one. I love it |
Can one cup of rice be cooked instead of five cups? | Yes, you can. I've never made five cups in mine. I always add a few drops of oil and then there's never a problem with the rice sticking to the bottom. I love this rice cooker and am so happy that I found one that doesn't have the toxic non-stick coating like my old one did. |
Can one cup of rice be cooked instead of five cups? | Yes. I do it everyday. Just use 1 and half cup of water ( use the same cup for rice). Remember to leave the cooked rice in the pot for 10 minutes after you unplug. It helps to moisten the thick crust at the bottom. |
Can one cup of rice be cooked instead of five cups? | Hi Karie - Yes, this rice maker works well with small amounts of rice also. We are two and seldom make more than 1 to 2 cups of rice. |
It's hard to tell dimensions from the pictures. Is the truck really about 14 inches long? | Yes, this is a great size with the described dimensions being accurate. Highly recommend this toy for any child who loves garbage and recycling trucks. |
It's hard to tell dimensions from the pictures. Is the truck really about 14 inches long? | Yes, the truck is that long from front to back. My son (almost 3) absolutely loves this item. |
It's hard to tell dimensions from the pictures. Is the truck really about 14 inches long? | Yes, it is. My grandson loves the truck--it's his favorite toy (he's 3 years old). |
It's hard to tell dimensions from the pictures. Is the truck really about 14 inches long? | I believe it is 14 inches, but not sure because it's at my daughter's house. My grandson loves this good-sized truck. |
It's hard to tell dimensions from the pictures. Is the truck really about 14 inches long? | Yes, the truck is actually that big. I was surprised that it was mostly assembled too. My son got it for Christmasast year. He is 3 years old, turning 4 soon, and was playing with it last night. I like that it comes with a garbage can and realistic looking recycling garbage. He likes the tipper that loads the garbage into the truck. The truck can hold a lot of trash. |
will it work on 99 silverado v8 | Can't be absolutely sure. It worked on my 99 Cadillac Deville and my 96 Chevy Silverado. |
will it work on 99 silverado v8 | Most likely, used it on my 97 Pontiac, you should have the same GM compressor. |
If the diameter is 7 1/2 inches, isn't that rather thick? | The actual pole is standard size for Shepherd's hooks you see at Lowe's, ect. I think the 7 and 1/2 inch diameter includes the projection of the hook and (maybe) the anchor foot. It is well-proportioned and a great height for butterfly feeders or light-weight plants you want hung closer to the ground. It is too low for a bird feeder. I think the height is the more important feature. The taller Shepherd's hooks I've purchased at Lowe's have a much wider diameter. |
If the diameter is 7 1/2 inches, isn't that rather thick? | The metal rod itself is only 1/4 inch (0.25") in diameter. The 7 1/2 inches mentioned in the description is the (horizontal) distance between the center bottom of the "hook" and the vertical portion of the rod - i.e., the distance between the place where you hang something and the long vertical rod you stick into the ground. If you hang something (from it's center point) that is more than 15 inches wide, then it will hit up against the vertical rod. |
If the diameter is 7 1/2 inches, isn't that rather thick? | T. Riley is correct, except it's closer to 1/2" or .050" diameter because I fitted it into an extension pole. The L bracket leg is close to 1/4" .025". But with that being said, I bought mine at Lowe's. |
How many servings per container? | label suggests heaping teaspoon per 1 cup water = 75 servings per 12 oz jar. I add to most things, soups, stews, water for rice or spaghetti or lentils. |
Does it include mattresses? | No. Mattresses are not included however when you do buy them make sure to get it 7" or under. Great value on a bunk bed though! We are happy with it. |
Does it include mattresses? | Sorry about the late response....(we have been traveling). It does not include mattresses but does have a very good support for holding them. |
Does it have any internal memory? How many pages can i save on the device before i need to download them (approx)? | Yes it stores what you write in the memory until you transfer the saved data to the computer |
Does it have any internal memory? How many pages can i save on the device before i need to download them (approx)? | Yes it does have an internal memory. As for the number of pages I am not sure, but I remember reading that somewhere .. May be on the manufacturer's website. I have saved my notes in memory and downloaded them successfully to my computer |
Can it fit a baking pan that is 11" x 9" ? | I don't believe so. I'm answering this from work, so I'm not sure, but I don't think so. I can get a loaf pan in there perfectly though, so that's why I'm thinking that the 11" won' fit. |
Can it fit a baking pan that is 11" x 9" ? | It depends if the sides of the pan are straight up and down or if they slant out. Glass pans with handles don't fit. |
Can it fit a baking pan that is 11" x 9" ? | I'm not sure. I don't have a pan that size, but the pan than comes with the oven is 11 x 10 |
Can it fit a baking pan that is 11" x 9" ? | Yes it can. Its 10 1/4 deep and 11 across inside. The pan that comes with it is 11 3/8 wide but that pan slides in grooves along the side. I measured outside of the grooves and its exactly 11 inches. |
Are there any manual controls or at least Program mode? Can you set the camera to take long exposures? | yes, to the left of Iauto there is a "P", when you select that you can now tab down using the joystich to manual set you photo options |
Are there any manual controls or at least Program mode? Can you set the camera to take long exposures? | I am really not sure. I can tell you that this is a great point and shoot camera with great quality and speed. You can take picture after picture with no pauses in between which I love since I have small children. I hope this helps! |
recording cassete tapes: Can I plug in a cassete player into a magnavox MDR515H 500GB HDD and record the tape cassete onto a cd? | Jane - Sorry, the Magnavox MDR515 does NOT record to CD's, only to DVD's. (It however plays audio CD's as well as DVD's.) To transfer audio cassette tapes to CD's, it is first necessary to convert the analog recordings to a digital format such as WAV or MP3. This is easily accomplished if you have a PC computer at home. For details, refer to the following links: http://windows.microsoft.com/en-US/windows-vista/Trapped-on-tape-Transferring-audio-from-cassettes-to-your-computer -or- http://www.top-windows-tutorials.com/tape-to-mp3.html |
Can you instal it without the light and is therer a cover available? | We installed the fan in our shed and don't remember if we had a cover. We needed the light. I'm sorry we couldn't be anymore help. We have had good luck with our fan but we don't run it every day. |
Can you instal it without the light and is therer a cover available? | Electrician relative will install. Does it come with fixture and such since there is none in the ceiling at this time? |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.