app.py

from __future__ import annotations
import os
import gc
import base64
import io
import time
import shutil
import numpy as np
import torch
import cv2
import ezdxf
from ezdxf.addons.text2path import make_paths_from_str
from ezdxf import path
from ezdxf.addons import text2path
from ezdxf.enums import TextEntityAlignment
from ezdxf.fonts.fonts import FontFace, get_font_face
import gradio as gr
from PIL import Image, ImageEnhance
from pathlib import Path
from typing import List, Union
from ultralytics import YOLOWorld, YOLO
from ultralytics.engine.results import Results
from ultralytics.utils.plotting import save_one_box
from transformers import AutoModelForImageSegmentation
from torchvision import transforms
from scalingtestupdated import calculate_scaling_factor
from shapely.geometry import Polygon, Point, MultiPolygon
from scipy.interpolate import splprep, splev
from scipy.ndimage import gaussian_filter1d
from u2net import U2NETP

# ---------------------
# Create a cache folder for models
# ---------------------
CACHE_DIR = os.path.join(os.path.dirname(__file__), ".cache")
os.makedirs(CACHE_DIR, exist_ok=True)

# ---------------------
# Custom Exceptions
# ---------------------
class DrawerNotDetectedError(Exception):
    """Raised when the drawer cannot be detected in the image"""
    pass

class ReferenceBoxNotDetectedError(Exception):
    """Raised when the reference box cannot be detected in the image"""
    pass

class BoundaryOverlapError(Exception):
    """Raised when the optional boundary dimensions are too small and overlap with the inner contours."""
    pass

class TextOverlapError(Exception):
    """Raised when the text overlaps with the inner contours (with a margin of 0.75)."""
    pass

# ---------------------
# Global Model Initialization with caching and print statements
# ---------------------
print("Loading YOLOWorld model...")
start_time = time.time()
yolo_model_path = os.path.join(CACHE_DIR, "yolov8x-worldv2.pt")
if not os.path.exists(yolo_model_path):
    print("Caching YOLOWorld model to", yolo_model_path)
    shutil.copy("yolov8x-worldv2.pt", yolo_model_path)
drawer_detector_global = YOLOWorld(yolo_model_path)
drawer_detector_global.set_classes(["box"])
print("YOLOWorld model loaded in {:.2f} seconds".format(time.time() - start_time))

print("Loading YOLO reference model...")
start_time = time.time()
reference_model_path = os.path.join(CACHE_DIR, "best.pt")
if not os.path.exists(reference_model_path):
    print("Caching YOLO reference model to", reference_model_path)
    shutil.copy("best.pt", reference_model_path)
reference_detector_global = YOLO(reference_model_path)
print("YOLO reference model loaded in {:.2f} seconds".format(time.time() - start_time))

print("Loading U²-Net model for reference background removal (U2NETP)...")
start_time = time.time()
u2net_model_path = os.path.join(CACHE_DIR, "u2netp.pth")
if not os.path.exists(u2net_model_path):
    print("Caching U²-Net model to", u2net_model_path)
    shutil.copy("u2netp.pth", u2net_model_path)
u2net_global = U2NETP(3, 1)
u2net_global.load_state_dict(torch.load(u2net_model_path, map_location="cpu"))
device = "cpu"
u2net_global.to(device)
u2net_global.eval()
print("U²-Net model loaded in {:.2f} seconds".format(time.time() - start_time))

print("Loading BiRefNet model...")
start_time = time.time()
birefnet_global = AutoModelForImageSegmentation.from_pretrained(
    "zhengpeng7/BiRefNet", trust_remote_code=True, cache_dir=CACHE_DIR
)
torch.set_float32_matmul_precision("high")
birefnet_global.to(device)
birefnet_global.eval()
print("BiRefNet model loaded in {:.2f} seconds".format(time.time() - start_time))

# Define transform for BiRefNet
transform_image_global = transforms.Compose([
    transforms.Resize((1024, 1024)),
    transforms.ToTensor(),
    transforms.Normalize([0.485, 0.456, 0.406], [0.229, 0.224, 0.225]),
])

# ---------------------
# Model Reload Function (if needed)
# ---------------------
def unload_and_reload_models():
    global drawer_detector_global, reference_detector_global, birefnet_global, u2net_global
    print("Reloading models...")
    start_time = time.time()
    del drawer_detector_global, reference_detector_global, birefnet_global, u2net_global
    gc.collect()
    if torch.cuda.is_available():
        torch.cuda.empty_cache()
    gc.collect()
    new_drawer_detector = YOLOWorld(os.path.join(CACHE_DIR, "yolov8x-worldv2.pt"))
    new_drawer_detector.set_classes(["box"])
    new_reference_detector = YOLO(os.path.join(CACHE_DIR, "best.pt"))
    new_birefnet = AutoModelForImageSegmentation.from_pretrained(
        "zhengpeng7/BiRefNet", trust_remote_code=True, cache_dir=CACHE_DIR
    )
    new_birefnet.to(device)
    new_birefnet.eval()
    new_u2net = U2NETP(3, 1)
    new_u2net.load_state_dict(torch.load(os.path.join(CACHE_DIR, "u2netp.pth"), map_location="cpu"))
    new_u2net.to(device)
    new_u2net.eval()
    drawer_detector_global = new_drawer_detector
    reference_detector_global = new_reference_detector
    birefnet_global = new_birefnet
    u2net_global = new_u2net
    print("Models reloaded in {:.2f} seconds".format(time.time() - start_time))

# ---------------------
# Helper Function: resize_img (defined once)
# ---------------------
def resize_img(img: np.ndarray, resize_dim):
    return np.array(Image.fromarray(img).resize(resize_dim))

# ---------------------
# Other Helper Functions for Detection & Processing
# ---------------------
def yolo_detect(image: Union[str, Path, int, Image.Image, list, tuple, np.ndarray, torch.Tensor]) -> np.ndarray:
    t = time.time()
    results: List[Results] = drawer_detector_global.predict(image)
    if not results or len(results) == 0 or len(results[0].boxes) == 0:
        raise DrawerNotDetectedError("Drawer not detected in the image.")
    print("Drawer detection completed in {:.2f} seconds".format(time.time() - t))
    return save_one_box(results[0].cpu().boxes.xyxy, im=results[0].orig_img, save=False)

def detect_reference_square(img: np.ndarray):
    t = time.time()
    res = reference_detector_global.predict(img, conf=0.15)
    if not res or len(res) == 0 or len(res[0].boxes) == 0:
        raise ReferenceBoxNotDetectedError("Reference box not detected in the image.")
    print("Reference detection completed in {:.2f} seconds".format(time.time() - t))
    return (
        save_one_box(res[0].cpu().boxes.xyxy, res[0].orig_img, save=False),
        res[0].cpu().boxes.xyxy[0]
    )

# Use U2NETP for reference background removal.
def remove_bg_u2netp(image: np.ndarray) -> np.ndarray:
    t = time.time()
    image_pil = Image.fromarray(image)
    transform_u2netp = transforms.Compose([
        transforms.Resize((320, 320)),
        transforms.ToTensor(),
        transforms.Normalize([0.485, 0.456, 0.406], [0.229, 0.224, 0.225]),
    ])
    input_tensor = transform_u2netp(image_pil).unsqueeze(0).to("cpu")
    with torch.no_grad():
        outputs = u2net_global(input_tensor)
    pred = outputs[0]
    pred = (pred - pred.min()) / (pred.max() - pred.min() + 1e-8)
    pred_np = pred.squeeze().cpu().numpy()
    pred_np = cv2.resize(pred_np, (image_pil.width, image_pil.height))
    pred_np = (pred_np * 255).astype(np.uint8)
    print("U2NETP background removal completed in {:.2f} seconds".format(time.time() - t))
    return pred_np

# Use BiRefNet for main object background removal.
def remove_bg(image: np.ndarray) -> np.ndarray:
    t = time.time()
    image_pil = Image.fromarray(image)
    input_images = transform_image_global(image_pil).unsqueeze(0).to("cpu")
    with torch.no_grad():
        preds = birefnet_global(input_images)[-1].sigmoid().cpu()
    pred = preds[0].squeeze()
    pred_pil = transforms.ToPILImage()(pred)
    scale_ratio = 1024 / max(image_pil.size)
    scaled_size = (int(image_pil.size[0] * scale_ratio), int(image_pil.size[1] * scale_ratio))
    result = np.array(pred_pil.resize(scaled_size))
    print("BiRefNet background removal completed in {:.2f} seconds".format(time.time() - t))
    return result

def make_square(img: np.ndarray):
    height, width = img.shape[:2]
    max_dim = max(height, width)
    pad_height = (max_dim - height) // 2
    pad_width = (max_dim - width) // 2
    pad_height_extra = max_dim - height - 2 * pad_height
    pad_width_extra = max_dim - width - 2 * pad_width
    if len(img.shape) == 3:
        padded = np.pad(img, ((pad_height, pad_height + pad_height_extra),
                              (pad_width, pad_width + pad_width_extra),
                              (0, 0)), mode="edge")
    else:
        padded = np.pad(img, ((pad_height, pad_height + pad_height_extra),
                              (pad_width, pad_width + pad_width_extra)), mode="edge")
    return padded

def shrink_bbox(image: np.ndarray, shrink_factor: float):
    height, width = image.shape[:2]
    center_x, center_y = width // 2, height // 2
    new_width = int(width * shrink_factor)
    new_height = int(height * shrink_factor)
    x1 = max(center_x - new_width // 2, 0)
    y1 = max(center_y - new_height // 2, 0)
    x2 = min(center_x + new_width // 2, width)
    y2 = min(center_y + new_height // 2, height)
    return image[y1:y2, x1:x2]

def exclude_scaling_box(image: np.ndarray, bbox: np.ndarray, orig_size: tuple, processed_size: tuple, expansion_factor: float = 1.2) -> np.ndarray:
    x_min, y_min, x_max, y_max = map(int, bbox)
    scale_x = processed_size[1] / orig_size[1]
    scale_y = processed_size[0] / orig_size[0]
    x_min = int(x_min * scale_x)
    x_max = int(x_max * scale_x)
    y_min = int(y_min * scale_y)
    y_max = int(y_max * scale_y)
    box_width = x_max - x_min
    box_height = y_max - y_min
    expanded_x_min = max(0, int(x_min - (expansion_factor - 1) * box_width / 2))
    expanded_x_max = min(image.shape[1], int(x_max + (expansion_factor - 1) * box_width / 2))
    expanded_y_min = max(0, int(y_min - (expansion_factor - 1) * box_height / 2))
    expanded_y_max = min(image.shape[0], int(y_max + (expansion_factor - 1) * box_height / 2))
    image[expanded_y_min:expanded_y_max, expanded_x_min:expanded_x_max] = 0
    return image

def resample_contour(contour):
    num_points = 1000
    smoothing_factor = 5
    spline_degree = 3
    if len(contour) < spline_degree + 1:
        raise ValueError(f"Contour must have at least {spline_degree + 1} points, but has {len(contour)} points.")
    contour = contour[:, 0, :]
    tck, _ = splprep([contour[:, 0], contour[:, 1]], s=smoothing_factor)
    u = np.linspace(0, 1, num_points)
    resampled_points = splev(u, tck)
    smoothed_x = gaussian_filter1d(resampled_points[0], sigma=1)
    smoothed_y = gaussian_filter1d(resampled_points[1], sigma=1)
    return np.array([smoothed_x, smoothed_y]).T

# ---------------------
# Add the missing extract_outlines function
# ---------------------
def extract_outlines(binary_image: np.ndarray) -> (np.ndarray, list):
    contours, _ = cv2.findContours(binary_image, cv2.RETR_EXTERNAL, cv2.CHAIN_APPROX_NONE)
    outline_image = np.zeros_like(binary_image)
    cv2.drawContours(outline_image, contours, -1, (255), thickness=2)
    return cv2.bitwise_not(outline_image), contours

# ---------------------
# Functions for Finger Cut Clearance
# ---------------------
def union_tool_and_circle(tool_polygon: Polygon, center_inch, circle_diameter=1.0):
    radius = circle_diameter / 2.0
    circle_poly = Point(center_inch).buffer(radius, resolution=64)
    union_poly = tool_polygon.union(circle_poly)
    return union_poly

def build_tool_polygon(points_inch):
    return Polygon(points_inch)

def polygon_to_exterior_coords(poly: Polygon):
    if poly.geom_type == "MultiPolygon":
        biggest = max(poly.geoms, key=lambda g: g.area)
        poly = biggest
    if not poly.exterior:
        return []
    return list(poly.exterior.coords)

def place_finger_cut_adjusted(tool_polygon, points_inch, existing_centers, all_polygons, circle_diameter=1.0, min_gap=0.25, max_attempts=30):
    import random
    needed_center_distance = circle_diameter + min_gap
    radius = circle_diameter / 2.0
    attempts = 0
    indices = list(range(len(points_inch)))
    random.shuffle(indices)  # Shuffle indices for randomness

    for i in indices:
        if attempts >= max_attempts:
            break
        cx, cy = points_inch[i]
        # Try small adjustments around the chosen candidate
        for dx in np.linspace(-0.1, 0.1, 5):
            for dy in np.linspace(-0.1, 0.1, 5):
                candidate_center = (cx + dx, cy + dy)
                # Check distance from already placed centers
                if any(np.hypot(candidate_center[0] - ex, candidate_center[1] - ey) < needed_center_distance for ex, ey in existing_centers):
                    continue
                circle_poly = Point(candidate_center).buffer(radius, resolution=64)
                union_poly = tool_polygon.union(circle_poly)
                overlap = False
                # Check against other tool polygons for overlap or proximity issues
                for poly in all_polygons:
                    if union_poly.intersects(poly) or circle_poly.buffer(min_gap).intersects(poly):
                        overlap = True
                        break
                if overlap:
                    continue
                # If candidate passes, accept it
                existing_centers.append(candidate_center)
                return union_poly, candidate_center
        attempts += 1
    print("Warning: Could not place a finger cut circle meeting all spacing requirements.")
    return None, None

# ---------------------
# DXF Spline and Boundary Functions
# ---------------------
def save_dxf_spline(inflated_contours, scaling_factor, height, finger_clearance=False):
    degree = 3
    closed = True
    doc = ezdxf.new(units=0)
    doc.units = ezdxf.units.IN
    doc.header["$INSUNITS"] = ezdxf.units.IN
    msp = doc.modelspace()
    finger_cut_centers = []
    final_polygons_inch = []
    for contour in inflated_contours:
        try:
            resampled_contour = resample_contour(contour)
            points_inch = [(x * scaling_factor, (height - y) * scaling_factor) for x, y in resampled_contour]
            if len(points_inch) < 3:
                continue
            if np.linalg.norm(np.array(points_inch[0]) - np.array(points_inch[-1])) > 1e-2:
                points_inch.append(points_inch[0])
            tool_polygon = build_tool_polygon(points_inch)
            if finger_clearance:
                union_poly, center = place_finger_cut_adjusted(tool_polygon, points_inch, finger_cut_centers, final_polygons_inch, circle_diameter=1.0, min_gap=0.25, max_attempts=30)
                if union_poly is not None:
                    tool_polygon = union_poly
            exterior_coords = polygon_to_exterior_coords(tool_polygon)
            if len(exterior_coords) < 3:
                continue
            msp.add_spline(exterior_coords, degree=degree, dxfattribs={"layer": "TOOLS"})
            final_polygons_inch.append(tool_polygon)
        except ValueError as e:
            print(f"Skipping contour: {e}")
    return doc, final_polygons_inch

def add_rectangular_boundary(doc, polygons_inch, boundary_length, boundary_width, offset_unit, annotation_text="", image_height_in=None, image_width_in=None):
    msp = doc.modelspace()
    # Convert from mm if necessary
    if offset_unit.lower() == "mm":
        if boundary_length < 50:
            boundary_length = boundary_length * 25.4
        if boundary_width < 50:
            boundary_width = boundary_width * 25.4
        boundary_length_in = boundary_length / 25.4
        boundary_width_in = boundary_width / 25.4
    else:
        boundary_length_in = boundary_length
        boundary_width_in = boundary_width

    # Compute bounding box of inner contours
    min_x = float("inf")
    min_y = float("inf")
    max_x = -float("inf")
    max_y = -float("inf")
    for poly in polygons_inch:
        b = poly.bounds
        min_x = min(min_x, b[0])
        min_y = min(min_y, b[1])
        max_x = max(max_x, b[2])
        max_y = max(max_y, b[3])
    if min_x == float("inf"):
        print("No tool polygons found, skipping boundary.")
        return None

    # Compute inner bounding box dimensions
    inner_width = max_x - min_x
    inner_length = max_y - min_y

    # Set clearance margins
    clearance_side = 0.25  # left/right clearance
    clearance_tb = 0.25    # top/bottom clearance
    if annotation_text.strip():
        clearance_tb = 0.75

    # Calculate center of inner contours
    center_x = (min_x + max_x) / 2
    center_y = (min_y + max_y) / 2

    # Draw rectangle centered at (center_x, center_y)
    left = center_x - boundary_width_in / 2
    right = center_x + boundary_width_in / 2
    bottom = center_y - boundary_length_in / 2
    top = center_y + boundary_length_in / 2

    rect_coords = [(left, bottom), (right, bottom), (right, top), (left, top), (left, bottom)]
    from shapely.geometry import Polygon as ShapelyPolygon
    boundary_polygon = ShapelyPolygon(rect_coords)
    msp.add_lwpolyline(rect_coords, close=True, dxfattribs={"layer": "BOUNDARY"})
    
    text_top = boundary_polygon.bounds[1] + 1
    if (annotation_text.strip()==0):
        if boundary_width_in <= inner_width + 2 * clearance_side or boundary_length_in <= inner_length + 2 * clearance_tb:
            raise BoundaryOverlapError("Error: The specified boundary dimensions are too small and overlap with the inner contours. Please provide larger values.")
    else:
        if text_top > (min_y - 0.75):
            raise TextOverlapError("Error: The Text is overlapping the inner contours of the object.")
        
    return boundary_polygon

def draw_polygons_inch(polygons_inch, image_rgb, scaling_factor, image_height, color=(0,0,255), thickness=2):
    for poly in polygons_inch:
        if poly.geom_type == "MultiPolygon":
            for subpoly in poly.geoms:
                draw_single_polygon(subpoly, image_rgb, scaling_factor, image_height, color, thickness)
        else:
            draw_single_polygon(poly, image_rgb, scaling_factor, image_height, color, thickness)

def draw_single_polygon(poly, image_rgb, scaling_factor, image_height, color=(0,0,255), thickness=2):
    ext = list(poly.exterior.coords)
    if len(ext) < 3:
        return
    pts_px = []
    for (x_in, y_in) in ext:
        px = int(x_in / scaling_factor)
        py = int(image_height - (y_in / scaling_factor))
        pts_px.append([px, py])
    pts_px = np.array(pts_px, dtype=np.int32)
    cv2.polylines(image_rgb, [pts_px], isClosed=True, color=color, thickness=thickness, lineType=cv2.LINE_AA)

# ---------------------
# Main Predict Function with Finger Cut Clearance, Boundary Box, Annotation and Sharpness Enhancement
# ---------------------
def predict(
    image: Union[str, bytes, np.ndarray],
    offset_value: float,
    offset_unit: str,         # "mm" or "inches"
    finger_clearance: str,    # "Yes" or "No"
    add_boundary: str,        # "Yes" or "No"
    boundary_length: float,
    boundary_width: float,
    annotation_text: str
):
    overall_start = time.time()
    # Convert image to NumPy array if needed
    if isinstance(image, str):
        if os.path.exists(image):
            image = np.array(Image.open(image).convert("RGB"))
        else:
            try:
                image = np.array(Image.open(io.BytesIO(base64.b64decode(image))).convert("RGB"))
            except Exception:
                raise ValueError("Invalid base64 image data")

    # Apply brightness and sharpness enhancement
    if isinstance(image, np.ndarray):
        pil_image = Image.fromarray(image)
        enhanced_image = ImageEnhance.Sharpness(pil_image).enhance(1.5)
        image = np.array(enhanced_image)

    # ---------------------
    # 1) Detect the drawer with YOLOWorld (or use original image if not detected)
    # ---------------------
    drawer_detected = True
    try:
        t = time.time()
        drawer_img = yolo_detect(image)
        print("Drawer detection completed in {:.2f} seconds".format(time.time() - t))
    except DrawerNotDetectedError as e:
        print(f"Drawer not detected: {e}, using original image.")
        drawer_detected = False
        drawer_img = cv2.cvtColor(image, cv2.COLOR_RGB2BGR)

    # Process the image (either cropped drawer or original)
    t = time.time()
    if drawer_detected:
        # For detected drawers: shrink and square
        shrunked_img = make_square(shrink_bbox(drawer_img, 0.90))
    else:
        # For non-drawer images: keep original dimensions
        shrunked_img = drawer_img  # Already in BGR format from above
    del drawer_img
    gc.collect()
    print("Image processing completed in {:.2f} seconds".format(time.time() - t))

    # ---------------------
    # 2) Detect the reference box with YOLO (now works on either cropped or original image)
    # ---------------------
    try:
        t = time.time()
        reference_obj_img, scaling_box_coords = detect_reference_square(shrunked_img)
        print("Reference square detection completed in {:.2f} seconds".format(time.time() - t))
    except ReferenceBoxNotDetectedError as e:
        return None, None, None, None, f"Error: {str(e)}"

    # ---------------------
    # 3) Remove background of the reference box to compute scaling factor
    # ---------------------
    t = time.time()
    reference_obj_img = make_square(reference_obj_img)
    reference_square_mask = remove_bg_u2netp(reference_obj_img)
    print("Reference image processing completed in {:.2f} seconds".format(time.time() - t))

    t = time.time()
    try:
        cv2.imwrite("mask.jpg", cv2.cvtColor(reference_obj_img, cv2.COLOR_RGB2GRAY))
        scaling_factor = calculate_scaling_factor(
            reference_image_path="./Reference_ScalingBox.jpg",
            target_image=reference_square_mask,
            feature_detector="ORB",
        )
    except ZeroDivisionError:
        scaling_factor = None
        print("Error calculating scaling factor: Division by zero")
    except Exception as e:
        scaling_factor = None
        print(f"Error calculating scaling factor: {e}")

    if scaling_factor is None or scaling_factor == 0:
        scaling_factor = 1.0
        print("Using default scaling factor of 1.0 due to calculation error")
    gc.collect()
    print("Scaling factor determined: {}".format(scaling_factor))

    # ---------------------
    # 4) Optional boundary dimension checks (now without size limits)
    # ---------------------
    if add_boundary.lower() == "yes":
        if offset_unit.lower() == "mm":
            if boundary_length < 50:
                boundary_length = boundary_length * 25.4
            if boundary_width < 50:
                boundary_width = boundary_width * 25.4
            boundary_length_in = boundary_length / 25.4
            boundary_width_in = boundary_width / 25.4
        else:
            boundary_length_in = boundary_length
            boundary_width_in = boundary_width
            
    # ---------------------
    # 5) Remove background from the shrunked drawer image (main objects)
    # ---------------------
    if offset_unit.lower() == "mm":
        if offset_value < 1:
            offset_value = offset_value * 25.4
        offset_inches = offset_value / 25.4
    else:
        offset_inches = offset_value

    t = time.time()
    orig_size = shrunked_img.shape[:2]
    objects_mask = remove_bg(shrunked_img)
    processed_size = objects_mask.shape[:2]

    objects_mask = exclude_scaling_box(objects_mask, scaling_box_coords, orig_size, processed_size, expansion_factor=2)
    objects_mask = resize_img(objects_mask, (shrunked_img.shape[1], shrunked_img.shape[0]))
    del scaling_box_coords
    gc.collect()
    print("Object masking completed in {:.2f} seconds".format(time.time() - t))

    # Dilate mask by offset_pixels
    t = time.time()
    offset_pixels = (offset_inches / scaling_factor) * 2 + 1 if scaling_factor != 0 else 1
    dilated_mask = cv2.dilate(objects_mask, np.ones((int(offset_pixels), int(offset_pixels)), np.uint8))
    del objects_mask
    gc.collect()
    print("Mask dilation completed in {:.2f} seconds".format(time.time() - t))

    Image.fromarray(dilated_mask).save("./outputs/scaled_mask_new.jpg")

    # ---------------------
    # 6) Extract outlines from the mask and convert them to DXF splines
    # ---------------------
    t = time.time()
    outlines, contours = extract_outlines(dilated_mask)
    print("Outline extraction completed in {:.2f} seconds".format(time.time() - t))

    output_img = shrunked_img.copy()
    del shrunked_img
    gc.collect()

    t = time.time()
    use_finger_clearance = True if finger_clearance.lower() == "yes" else False
    doc, final_polygons_inch = save_dxf_spline(
        contours, scaling_factor, processed_size[0], finger_clearance=use_finger_clearance
    )
    del contours
    gc.collect()
    print("DXF generation completed in {:.2f} seconds".format(time.time() - t))

    # ---------------------
    # Compute bounding box of inner tool contours BEFORE adding optional boundary
    # ---------------------
    inner_min_x = float("inf")
    inner_min_y = float("inf")
    inner_max_x = -float("inf")
    inner_max_y = -float("inf")
    for poly in final_polygons_inch:
        b = poly.bounds
        inner_min_x = min(inner_min_x, b[0])
        inner_min_y = min(inner_min_y, b[1])
        inner_max_x = max(inner_max_x, b[2])
        inner_max_y = max(inner_max_y, b[3])

    # ---------------------
    # 7) Add optional rectangular boundary
    # ---------------------
    boundary_polygon = None
    if add_boundary.lower() == "yes":
        boundary_polygon = add_rectangular_boundary(
            doc,
            final_polygons_inch,
            boundary_length,
            boundary_width,
            offset_unit,
            annotation_text,
            image_height_in=output_img.shape[0] * scaling_factor,
            image_width_in=output_img.shape[1] * scaling_factor
        )
        if boundary_polygon is not None:
            final_polygons_inch.append(boundary_polygon)

    # ---------------------
    # 8) Add annotation text (if provided) in the DXF
    # ---------------------
    msp = doc.modelspace()
    
    if annotation_text.strip():
        text_x = ((inner_min_x + inner_max_x) / 2.0) - (int(len(annotation_text.strip()) / 2.0))
        text_height_dxf = 0.75  
        text_y_dxf = boundary_polygon.bounds[1] + 0.25
        font = get_font_face("Arial")
        paths = text2path.make_paths_from_str(
            annotation_text.strip().upper(),
            font=font,  # Use default font
            size=text_height_dxf,
            align=TextEntityAlignment.LEFT
        )
        
        # Create a translation matrix
        translation = ezdxf.math.Matrix44.translate(text_x, text_y_dxf, 0)
        # Apply the translation to each path
        translated_paths = [p.transform(translation) for p in paths]
    
        # Render the paths as splines and polylines
        path.render_splines_and_polylines(
            msp, 
            translated_paths, 
            dxfattribs={"layer": "ANNOTATION", "color": 7}
        )

    # Save the DXF
    dxf_filepath = os.path.join("./outputs", "out.dxf")
    doc.saveas(dxf_filepath)

    # ---------------------
    # 9) For the preview images, draw the polygons and place text similarly
    # ---------------------
    draw_polygons_inch(final_polygons_inch, output_img, scaling_factor, processed_size[0], color=(0, 0, 255), thickness=2)
    new_outlines = np.ones_like(output_img) * 255
    draw_polygons_inch(final_polygons_inch, new_outlines, scaling_factor, processed_size[0], color=(0, 0, 255), thickness=2)

    if annotation_text.strip():
        text_height_cv = 0.75
        text_x_img = int(((inner_min_x + inner_max_x) / 2.0) / scaling_factor)
        text_y_in = boundary_polygon.bounds[1] + 0.25
        text_y_img = int(processed_size[0] - (text_y_in / scaling_factor))
        org = (text_x_img - int(len(annotation_text.strip()) * 6), text_y_img)

        # Method 2: Use two different thicknesses
        # Draw thicker outline
        temp_img = np.zeros_like(output_img)

        cv2.putText(
            temp_img,
            annotation_text.strip().upper(),
            org,
            cv2.FONT_HERSHEY_SIMPLEX,
            2,
            (0, 0, 255),  # Red color
            4,  # Thicker outline
            cv2.LINE_AA
        )

        cv2.putText(
            temp_img,
            annotation_text.strip().upper(),
            org,
            cv2.FONT_HERSHEY_SIMPLEX,
            2,
            (0, 0, 0),  # Black to create hole
            2,  # Thinner inner part
            cv2.LINE_AA
        )

        outline_mask = cv2.cvtColor(temp_img, cv2.COLOR_BGR2GRAY)
        _, outline_mask = cv2.threshold(outline_mask, 1, 255, cv2.THRESH_BINARY)

        output_img[outline_mask > 0] = temp_img[outline_mask > 0]
                
        cv2.putText(
            new_outlines,
            annotation_text.strip().upper(),
            org,
            cv2.FONT_HERSHEY_SIMPLEX,
            2,
            (0, 0, 255),  # Red color
            4,  # Thicker outline
            cv2.LINE_AA
        )
        
        cv2.putText(
            new_outlines,
            annotation_text.strip().upper(),
            org,
            cv2.FONT_HERSHEY_SIMPLEX,
            2,
            (255, 255, 255),  # Inner text in white
            2,  # Thinner inner part
            cv2.LINE_AA
        )

    outlines_color = cv2.cvtColor(new_outlines, cv2.COLOR_BGR2RGB)
    print("Total prediction time: {:.2f} seconds".format(time.time() - overall_start))

    return (
        cv2.cvtColor(output_img, cv2.COLOR_BGR2RGB),
        outlines_color,
        dxf_filepath,
        dilated_mask,
        str(scaling_factor)
    )

# ---------------------
# Gradio Interface
# ---------------------
if __name__ == "__main__":
    os.makedirs("./outputs", exist_ok=True)
    def gradio_predict(img, offset, offset_unit, finger_clearance, add_boundary, boundary_length, boundary_width, annotation_text):
        try:
            return predict(img, offset, offset_unit, finger_clearance, add_boundary, boundary_length, boundary_width, annotation_text)
        except Exception as e:
            return None, None, None, None, f"Error: {str(e)}"
    iface = gr.Interface(
        fn=gradio_predict,
        inputs=[
            gr.Image(label="Input Image"),
            gr.Number(label="Offset value for Mask", value=0.075),
            gr.Dropdown(label="Offset Unit", choices=["mm", "inches"], value="inches"),
            gr.Dropdown(label="Add Finger Clearance?", choices=["Yes", "No"], value="No"),
            gr.Dropdown(label="Add Rectangular Boundary?", choices=["Yes", "No"], value="No"),
            gr.Number(label="Boundary Length", value=300.0, precision=2),
            gr.Number(label="Boundary Width", value=200.0, precision=2),
            gr.Textbox(label="Annotation (max 20 chars)", max_length=20, placeholder="Type up to 20 characters")
        ],
        outputs=[
            gr.Image(label="Output Image"),
            gr.Image(label="Outlines of Objects"),
            gr.File(label="DXF file"),
            gr.Image(label="Mask"),
            gr.Textbox(label="Scaling Factor (inches/pixel)")
        ],
        examples=[
            ["./Test20.jpg", 0.075, "inches", "No", "No", 300.0, 200.0, "MyTool"],
            ["./Test21.jpg", 0.075, "inches", "Yes", "Yes", 300.0, 200.0, "Tool2"]
        ]
    )
    iface.launch(share=True)