update

app.py

@@ -1,134 +0,0 @@
-import streamlit as st
-import matplotlib.pyplot as plt
-import numpy as np
-
-from loudspeaker_tmatrix.core import simulate_loudspeaker
-from loudspeaker_tmatrix.visualization import plot_loudspeaker_response
-from loudspeaker_tmatrix.config import (
-    load_config,
-    load_loudspeaker_config,
-    AcousticalConstantsConfig,
-)
-
-config_path = "configs/config.yaml"
-default_loudspeaker_path = "configs/default_loudspeaker.yaml"
-
-cfg = load_config(config_path)
-loudspeaker_cfg = load_loudspeaker_config(default_loudspeaker_path)
-
-freq_array = np.logspace(
-    np.log10(cfg.frequency.min), np.log10(cfg.frequency.max), num=cfg.frequency.n_bins
-)
-
-angular_freq_array = 2 * np.pi * freq_array
-
-st.sidebar.title("Thiele Small parameters")
-
-### Sliders
-slider_Re = st.sidebar.slider(
-    "Electrical Coil Resistance (Re) [Ohm]",
-    0.0,
-    10.0,
-    loudspeaker_cfg.electrical.coil_resistance,
-)
-slider_Le = st.sidebar.slider(
-    "Electrical Coil Inductance (Le) [mH]",
-    0.0,
-    10.0,
-    loudspeaker_cfg.electrical.coil_inductance * 1e3,
-)
-slider_Le /= 1e3
-slider_Bl = st.sidebar.slider(
-    "Electromechanical factor (Bl) [N/A]",
-    0.0,
-    10.0,
-    loudspeaker_cfg.electromechanical_factor,
-)
-slider_Mm = st.sidebar.slider(
-    "Mechanical Mass (Mm) [mg]",
-    0.0,
-    50.0,
-    loudspeaker_cfg.mechanical.mass * 1e3,
-)
-slider_Mm /= 1e3
-slider_Cm = st.sidebar.slider(
-    "Mechanical Compliance (Cm) [mm/N]",
-    0.0,
-    5.0,
-    loudspeaker_cfg.mechanical.compliance * 1e3,
-)
-slider_Cm /= 1e3
-slider_Rm = st.sidebar.slider(
-    "Mechanical Resistance (Rm) [kg/s]",
-    0.0,
-    10.0,
-    loudspeaker_cfg.mechanical.resistance,
-)
-slider_diam = st.sidebar.slider(
-    "Effective diameter of radiation [cm]",
-    0.0,
-    50.0,
-    loudspeaker_cfg.acoustical.effective_diameter * 1e2,
-)
-slider_diam /= 1e2
-
-default_params = st.sidebar.button("Set default parameters")
-
-if default_params:
-    st.rerun(scope="app")
-
-
-freq_array = np.logspace(
-    np.log10(cfg.frequency.min), np.log10(cfg.frequency.max), num=cfg.frequency.n_bins
-)
-
-angular_freq_array = 2 * np.pi * freq_array
-
-thiele_small_params = {
-    "Re": slider_Re,
-    "Le": slider_Le,
-    "Bl": slider_Bl,
-    "Mm": slider_Mm,
-    "Cm": slider_Cm,
-    "Rm": slider_Rm,
-    "effective_diameter": slider_diam,
-}
-
-loudspeaker_responses = simulate_loudspeaker(
-    thiele_small_params, angular_freq_array, cfg.acoustical_constants
-)
-
-
-# Electrical impedance
-electrical_impedance_plot = plot_loudspeaker_response(
-    response_array=loudspeaker_responses["electrical_impedance"],
-    freq_array=freq_array,
-    title="Electrical Impedance",
-    magnitude_in_db=False,
-    magnitude_units="Ohm",
-    shift_phase=False,
-)
-
-
-mechanical_velocity_plot = plot_loudspeaker_response(
-    response_array=loudspeaker_responses["mechanical_velocity"],
-    freq_array=freq_array,
-    title="Mechanical Velocity",
-    magnitude_in_db=False,
-    magnitude_units="m/s",
-    shift_phase=True,
-)
-
-
-acoustical_pressure = plot_loudspeaker_response(
-    response_array=loudspeaker_responses["acoustical_pressure"],
-    freq_array=freq_array,
-    title="Acoustical Pressure",
-    magnitude_in_db=True,
-    magnitude_units="dB",
-    shift_phase=False,
-)
-
-st.pyplot(electrical_impedance_plot)
-st.pyplot(mechanical_velocity_plot)
-st.pyplot(acoustical_pressure)