installer_files/env/share/info/gdbm.info

This is gdbm.info, produced by makeinfo version 5.9.93 from gdbm.texi.

Published by the Free Software Foundation, 51 Franklin Street, Fifth
Floor Boston, MA 02110-1301, USA

   Copyright (C) 1989-1999, 2007-2018 Free Software Foundation, Inc.

   Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3 or
any later version published by the Free Software Foundation; with no
Invariant Sections, no Front-Cover, and no Back-Cover texts.  A copy of
the license is included in the section entitled "GNU Free Documentation
License."
INFO-DIR-SECTION Programming & development tools
START-INFO-DIR-ENTRY
* GDBM: (gdbm).                  The GNU database manager.
* gdbm_dump: (gdbm) gdbm_dump.   Dump the GDBM database into a flat file.
* gdbm_load: (gdbm) gdbm_load.   Load the database from a flat file.
* gdbmtool: (gdbm) gdbmtool.     Examine and modify a GDBM database.
END-INFO-DIR-ENTRY


File: gdbm.info,  Node: Top,  Next: Copying,  Up: (dir)

The GNU database manager.
*************************

GNU 'dbm' is a library of functions implementing a hashed database on a
disk file.  This manual documents GNU 'dbm' Version 1.18 ('gdbm').  The
software was originally written by Philip A. Nelson.  This document was
originally written by Pierre Gaumond from texts written by Phil.

* Menu:

Introduction:

* Copying::                    Your rights.
* Intro::                      Introduction to GNU dbm.
* List::                       List of functions.

Functions:

* Open::                       Opening the database.
* Close::                      Closing the database.
* Count::                      Counting records in the database.
* Store::                      Inserting and replacing records in the database.
* Fetch::                      Searching records in the database.
* Delete::                     Removing records from the database.
* Sequential::                 Sequential access to records.
* Reorganization::             Database reorganization.
* Sync::                       Insure all writes to disk have competed.
* Flat files::                 Export and import to Flat file format.
* Errors::                     Error handling.
* Recovery::                   Recovery from fatal errors.
* Options::                    Setting internal options.
* Locking::                    File locking.
* Variables::                  Useful global variables.

* Error codes::                Error codes returned by 'gdbm' calls.
* Compatibility::              Compatibility with UNIX dbm and ndbm.

Programs

* gdbmtool::                   Examine and modify a GDBM database.
* gdbm_dump::                  Dump the database into a flat file.
* gdbm_load::                  Load the database from a flat file.
* Exit codes::                 Exit codes returned by GDBM utilities.

Other topics:

* Bugs::                       Problems and bugs.
* Resources::                  Additional resources,

* GNU Free Documentation License::      Document license.
* Index::                       Index


File: gdbm.info,  Node: Copying,  Next: Intro,  Prev: Top,  Up: Top

1 Copying Conditions.
*********************

This library is "free"; this means that everyone is free to use it and
free to redistribute it on a free basis.  GNU 'dbm' ('gdbm') is not in
the public domain; it is copyrighted and there are restrictions on its
distribution, but these restrictions are designed to permit everything
that a good cooperating citizen would want to do.  What is not allowed
is to try to prevent others from further sharing any version of 'gdbm'
that they might get from you.

   Specifically, we want to make sure that you have the right to give
away copies 'gdbm', that you receive source code or else can get it if
you want it, that you can change these functions or use pieces of them
in new free programs, and that you know you can do these things.

   To make sure that everyone has such rights, we have to forbid you to
deprive anyone else of these rights.  For example, if you distribute
copies 'gdbm', you must give the recipients all the rights that you
have.  You must make sure that they, too, receive or can get the source
code.  And you must tell them their rights.

   Also, for our own protection, we must make certain that everyone
finds out that there is no warranty for anything in the 'gdbm'
distribution.  If these functions are modified by someone else and
passed on, we want their recipients to know that what they have is not
what we distributed, so that any problems introduced by others will not
reflect on our reputation.

   'Gdbm' is currently distributed under the terms of the GNU General
Public License, Version 3.  (_NOT_ under the GNU General Library Public
License.)  A copy the GNU General Public License is included with the
distribution of 'gdbm'.


File: gdbm.info,  Node: Intro,  Next: List,  Prev: Copying,  Up: Top

2 Introduction to GNU 'dbm'.
****************************

GNU 'dbm' ('gdbm') is a library of database functions that use
extensible hashing and works similar to the standard UNIX 'dbm'
functions.  These routines are provided to a programmer needing to
create and manipulate a hashed database.  ('gdbm' is _NOT_ a complete
database package for an end user.)

   The basic use of 'gdbm' is to store key/data pairs in a data file.
Each key must be unique and each key is paired with only one data item.
The keys can not be directly accessed in sorted order.  The basic unit
of data in 'gdbm' is the structure:

       typedef struct {
                  char *dptr;
                  int  dsize;
               } datum;

   This structure allows for arbitrary sized keys and data items.

   The key/data pairs are stored in a 'gdbm' disk file, called a 'gdbm'
database.  An application must open a 'gdbm' database to be able
manipulate the keys and data contained in the database.  'gdbm' allows
an application to have multiple databases open at the same time.  When
an application opens a 'gdbm' database, it is designated as a 'reader'
or a 'writer'.  A 'gdbm' database can be opened by at most one writer at
a time.  However, many readers may open the database simultaneously.
Readers and writers can not open the 'gdbm' database at the same time.


File: gdbm.info,  Node: List,  Next: Open,  Prev: Intro,  Up: Top

3 List of functions.
********************

The following is a quick list of the functions contained in the 'gdbm'
library.  The include file 'gdbm.h', that can be included by the user,
contains a definition of these functions.

     #include <gdbm.h>

     GDBM_FILE gdbm_open(name, block_size, flags, mode, fatal_func);
     int gdbm_close(dbf);
     int gdbm_store(dbf, key, content, flag);
     datum gdbm_fetch(dbf, key);
     int gdbm_delete(dbf, key);
     datum gdbm_firstkey(dbf);
     datum gdbm_nextkey(dbf, key);
     int gdbm_reorganize(dbf);
     int gdbm_sync(dbf);
     int gdbm_exists(dbf, key);
     char *gdbm_strerror(errno);
     int gdbm_setopt(dbf, option, value, size);
     int gdbm_fdesc(dbf);
     int gdbm_export (GDBM_FILE, const char *, int, int);
     int gdbm_export_to_file (GDBM_FILE dbf, FILE *fp);
     int gdbm_import (GDBM_FILE, const char *, int);
     int gdbm_import_from_file (GDBM_FILE dbf, FILE *fp, int flag);
     int gdbm_count (GDBM_FILE dbf, gdbm_count_t *pcount);
     int gdbm_version_cmp (int const a[], int const b[]);

   The 'gdbm.h' include file is often in the '/usr/include' directory.
(The actual location of 'gdbm.h' depends on your local installation of
'gdbm'.)


File: gdbm.info,  Node: Open,  Next: Close,  Prev: List,  Up: Top

4 Opening the database.
***********************

 -- gdbm interface: GDBM_FILE gdbm_open (const char *NAME, int
          BLOCK_SIZE, int FLAGS, int MODE, void (*fatal_func)(const char
          *))
     Initializes 'gdbm' system.  If the file has a size of zero bytes, a
     file initialization procedure is performed, setting up the initial
     structure in the file.

     The arguments are:

     NAME
          The name of the file (the complete name, 'gdbm' does not
          append any characters to this name).
     BLOCK_SIZE
          It is used during initialization to determine the size of
          various constructs.  It is the size of a single transfer from
          disk to memory.  This parameter is ignored if the file has
          been previously initialized.  If the value is less than 512,
          the file system block size is used instead.  The size is
          adjusted so that the block can hold exact number of directory
          entries, so that the effective block size can be slightly
          greater than requested.  However, if the 'GDBM_BSEXACT' flag
          is set and the size needs to be adjusted, the function will
          return with error status, setting the 'gdbm_errno' variable to
          'GDBM_BLOCK_SIZE_ERROR'.

     FLAGS
          If 'flags' is set to 'GDBM_READER', the user wants to just
          read the database and any call to 'gdbm_store' or
          'gdbm_delete' will fail.  Many readers can access the database
          at the same time.  If 'flags' is set to 'GDBM_WRITER', the
          user wants both read and write access to the database and
          requires exclusive access.  If 'flags' is set to
          'GDBM_WRCREAT', the user wants both read and write access to
          the database and wants it created if it does not already
          exist.  If 'flags' is set to 'GDBM_NEWDB', the user want a new
          database created, regardless of whether one existed, and wants
          read and write access to the new database.

          The following may also be logically or'd into the database
          flags: 'GDBM_SYNC', which causes all database operations to be
          synchronized to the disk, 'GDBM_NOLOCK', which prevents the
          library from performing any locking on the database file, and
          'GDBM_NOMMAP', which disables the memory mapping mechanism.
          The option 'GDBM_FAST' is now obsolete, since 'gdbm' defaults
          to no-sync mode.

          If this flag is set and the requested BLOCK_SIZE cannot be
          used without adjustment, 'gdbm_open' will refuse to create the
          databases.  In this case it will set the 'gdbm_errno' variable
          to 'GDBM_BLOCK_SIZE_ERROR' and return 'NULL'.

          If the host 'open' call (*note (open(2))open::) supports the
          'O_CLOEXEC' flag, the 'GDBM_CLOEXEC' can be or'd into the
          flags, to enable the close-on-exec flag for the database file
          descriptor.
     MODE
          File mode (see *note change permissions of a file:
          (chmod(2))chmod, and *note open a file: (open(2))open.), which
          is used if the file is created).
     FATAL_FUNC
          A function for 'gdbm' to call if it detects a fatal error.
          The only parameter of this function is a string.  If the value
          of 'NULL' is provided, 'gdbm' will use a default function.

     The return value, is the pointer needed by all other functions to
     access that 'gdbm' file.  If the return is the 'NULL' pointer,
     'gdbm_open' was not successful.  The errors can be found in
     'gdbm_errno' variable (*note gdbm_errno: Variables.).  Available
     error codes are discussed in *note Error codes::.

     In all of the following calls, the parameter DBF refers to the
     pointer returned from 'gdbm_open'.

 -- gdbm interface: GDBM_FILE gdbm_fd_open (int FD, const char *NAME,
          int BLOCK_SIZE, int FLAGS, int MODE, void (*fatal_func)(const
          char *))

     Alternative function for opening a GDBM database.  The FD argument
     is the file descriptor of the database file obtained by a call to
     'open'(2), 'creat'(2) or similar funcionss.  The descriptor is not
     dup'ed, and will be closed when the returned GDBM_FILE is closed.
     Use 'dup'(2) if that is not desirable.

 -- gdbm interface: int gdbm_copy_meta (GDBM_FILE DST, GDBM_FILE SRC)
     Copy file ownership and mode from SRC to DST.


File: gdbm.info,  Node: Close,  Next: Count,  Prev: Open,  Up: Top

5 Closing the database.
***********************

It is important that every file opened is also closed.  This is needed
to update the reader/writer count on the file:

 -- gdbm interface: int gdbm_close (GDBM_FILE DBF)
     This function closes the 'gdbm' file and frees all memory
     associated with it.  The parameter is:

     DBF
          The pointer returned by 'gdbm_open'.

     'Gdbm_close' returns 0 on success.  On error, it sets 'gdbm_errno'
     and system 'errno' variables to the codes describing the error and
     returns -1.


File: gdbm.info,  Node: Count,  Next: Store,  Prev: Close,  Up: Top

6 Number of Records
*******************

 -- gdbm interface: int gdbm_count (GDBM_FILE DBF, gdbm_count_t *PCOUNT)
     Counts number of records in the database DBF.  On success, stores
     it in the memory location pointed to by PCOUNT and return 0.  On
     error, sets 'gdbm_errno' (if relevant, also 'errno') and returns
     -1.


File: gdbm.info,  Node: Store,  Next: Fetch,  Prev: Count,  Up: Top

7 Inserting and replacing records in the database.
**************************************************

 -- gdbm interface: int gdbm_store (GDBM_FILE DBF, datum KEY, datum
          CONTENT, int FLAG)
     The function 'gdbm_store' inserts or replaces records in the
     database.

     The parameters are:

     DBF
          The pointer returned by 'gdbm_open'.
     KEY
          The search key.
     CONTENT
          The data to be associated with the key.
     FLAG
          Defines the action to take when the key is already in the
          database.  The value 'GDBM_REPLACE' (defined in 'gdbm.h') asks
          that the old data be replaced by the new CONTENT.  The value
          'GDBM_INSERT' asks that an error be returned and no action
          taken if the KEY already exists.

     This function can return the following values:

     -1
          The item was not stored in the database because the caller was
          not an official writer or either KEY or CONTENT have a 'NULL'
          'dptr' field.

          Both KEY and CONTENT must have the 'dptr' field be a
          non-'NULL' value.  Since a 'NULL' 'dptr' field is used by
          other functions to indicate an error, it cannot be valid data.
     +1
          The item was not stored because the argument FLAG was
          'GDBM_INSERT' and the KEY was already in the database.
     0
          No error.  The value of CONTENT is keyed by KEY.  The file on
          disk is updated to reflect the structure of the new database
          before returning from this function.

   If you store data for a KEY that is already in the data base, 'gdbm'
replaces the old data with the new data if called with 'GDBM_REPLACE'.
You do not get two data items for the same 'key' and you do not get an
error from 'gdbm_store'.

   The size in 'gdbm' is not restricted like 'dbm' or 'ndbm'.  Your data
can be as large as you want.


File: gdbm.info,  Node: Fetch,  Next: Delete,  Prev: Store,  Up: Top

8 Searching for records in the database.
****************************************

 -- gdbm interface: datum gdbm_fetch (GDBM_FILE DBF, datum KEY)
     Looks up a given KEY and returns the information associated with
     it.  The 'dptr' field in the structure that is returned points to a
     memory block allocated by 'malloc'.  It is the caller's
     responsibility to free it when no longer needed.

     If the 'dptr' is 'NULL', inspect the value of the 'gdbm_errno'
     variable (*note gdbm_errno: Variables.).  If it is
     'GDBM_ITEM_NOT_FOUND', no data was found.  Any other value means an
     error occurred.  Use 'gdbm_strerror' function to convert
     'gdbm_errno' to a human-readable string.

     The parameters are:

     DBF
          The pointer returned by 'gdbm_open'.
     KEY
          The search key.

   An example of using this function:

     content = gdbm_fetch (dbf, key);
     if (content.dptr == NULL)
       {
         fprintf(stderr, "key not found\n");
       }
     else
       {
         /* do something with content.dptr */
       }

   You may also search for a particular key without retrieving it:

 -- gdbm interface: int gdbm_exists (GDBM_FILE DBF, datum KEY)
     Checks whether the KEY exists in the database DBF.

     If KEY is found, returns 'true' ('1').  If it is not found, returns
     'false' ('0') and sets 'gdbm_errno' to 'GDBM_NO_ERROR' ('0').

     On error, returns '0' and sets 'gdbm_errno' to a non-'0' error
     code.

     The parameters are:

     DBF
          The pointer returned by 'gdbm_open'.
     KEY
          The search key.


File: gdbm.info,  Node: Delete,  Next: Sequential,  Prev: Fetch,  Up: Top

9 Removing records from the database.
*************************************

To remove some data from the database, use the 'gdbm_delete' function.

 -- gdbm interface: int gdbm_delete (GDBM_FILE DBF, datum KEY)
     Deletes the data associated with the given KEY, if it exists in the
     database DBF.  The file on disk is updated to reflect the structure
     of the new database before returning from this function.

     The parameters are:

     DBF
          The pointer returned by 'gdbm_open'.
     DATUM KEY
          The search key.

     The function returns '-1' if the item is not present or the
     requester is a reader.  The return of '0' marks a successful
     delete.


File: gdbm.info,  Node: Sequential,  Next: Reorganization,  Prev: Delete,  Up: Top

10 Sequential access to records.
********************************

The next two functions allow for accessing all items in the database.
This access is not 'key' sequential, but it is guaranteed to visit every
'key' in the database once.  The order has to do with the hash values.
'gdbm_firstkey' starts the visit of all keys in the database.
'gdbm_nextkey' finds and reads the next entry in the hash structure for
'dbf'.

 -- gdbm interface: datum gdbm_firstkey (GDBM_FILE DBF)
     Initiate sequential access to the database DBF.  The returned value
     is the first key accessed in the database.  If the 'dptr' field in
     the returned datum is 'NULL', inspect the 'gdbm_errno' variable
     (*note gdbm_errno: Variables.).  The value of 'GDBM_ITEM_NOT_FOUND'
     means that the database contains no data.  Other value means an
     error occurred.

     Otherwise, 'dptr' points to a memory block obtained from 'malloc',
     which holds the key value.  The caller is responsible for freeing
     this memory block when no longer needed.

 -- gdbm interface: datum gdbm_nextkey (GDBM_FILE DBF, datum PREV)
     This function continues the iteration over the keys in DBF,
     initiated by 'gdbm_firstkey'.  The parameter PREV holds the value
     returned from a previous call to 'gdbm_nextkey' or 'gdbm_firstkey'.

     The function returns next key from the database.  If the 'dptr'
     field in the returned datum is 'NULL' inspect the 'gdbm_errno'
     variable (*note gdbm_errno: Variables.).  The value of
     'GDBM_ITEM_NOT_FOUND' means that all keys in the database has been
     visited.  Any other value means an error occurred.

     Otherwise, 'dptr' points to a memory block obtained from 'malloc',
     which holds the key value.  The caller is responsible for freeing
     this memory block when no longer needed.

   These functions were intended to visit the database in read-only
algorithms, for instance, to validate the database or similar
operations.  The usual algorithm for sequential access is:

        key = gdbm_firstkey (dbf);
        while (key.dptr)
          {
             datum nextkey;

             /* do something with the key */
             ...

             /* Obtain the next key */
             nextkey = gdbm_nextkey (dbf, key);
             /* Reclaim the memory used by the key */
             free (key.dptr);
             /* Use nextkey in the next iteration. */
             key = nextkey;
          }

   Care should be taken when the 'gdbm_delete' function is used in such
a loop.  File visiting is based on a "hash table".  The 'gdbm_delete'
function re-arranges the hash table to make sure that any collisions in
the table do not leave some item "un-findable".  The original key order
is _not_ guaranteed to remain unchanged in all instances.  So it is
possible that some key will not be visited if a loop like the following
is executed:

        key = gdbm_firstkey (dbf);
        while (key.dptr)
          {
             datum nextkey;
             if (some condition)
               {
                  gdbm_delete (dbf, key);
               }
              nextkey = gdbm_nextkey (dbf, key);
              free (key.dptr);
              key = nextkey;
           }


File: gdbm.info,  Node: Reorganization,  Next: Sync,  Prev: Sequential,  Up: Top

11 Database reorganization.
***************************

The following function should be used very seldom.

 -- gdbm interface: int gdbm_reorganize (GDBM_FILE DBF)
     Reorganizes the database.

     The parameter is:

     DBF
          The pointer returned by 'gdbm_open'.

   If you have had a lot of deletions and would like to shrink the space
used by the 'gdbm' file, this function will reorganize the database.
This results, in particular, in shortening the length of a 'gdbm' file
by removing the space occupied by deleted records.

   This reorganization requires creating a new file and inserting all
the elements in the old file DBF into the new file.  The new file is
then renamed to the same name as the old file and DBF is updated to
contain all the correct information about the new file.  If an error is
detected, the return value is negative.  The value zero is returned
after a successful reorganization.


File: gdbm.info,  Node: Sync,  Next: Flat files,  Prev: Reorganization,  Up: Top

12 Database Synchronization
***************************

Unless your database was opened with the 'GDBM_SYNC' flag, 'gdbm' does
not wait for writes to be flushed to the disk before continuing.  This
allows for faster writing of databases at the risk of having a corrupted
database if the application terminates in an abnormal fashion.  The
following function allows the programmer to make sure the disk version
of the database has been completely updated with all changes to the
current time.

 -- gdbm interface: int gdbm_sync (GDBM_FILE DBF)
     Synchronizes the changes in DBF with its disk file.  The parameter
     is a pointer returned by 'gdbm_open'.

     This function would usually be called after a complete set of
     changes have been made to the database and before some long waiting
     time.  The 'gdbm_close' function automatically calls the equivalent
     of 'gdbm_sync' so no call is needed if the database is to be closed
     immediately after the set of changes have been made.

     'Gdbm_sync' returns 0 on success.  On error, it sets 'gdbm_errno'
     and system 'errno' variables to the codes describing the error and
     returns -1.


File: gdbm.info,  Node: Flat files,  Next: Errors,  Prev: Sync,  Up: Top

13 Export and Import
********************

'Gdbm' databases can be converted into so-called "flat format" files.
Such files cannot be used for searching, their sole purpose is to keep
the data from the database for restoring it when the need arrives.
There are two flat file formats, which differ in the way they represent
the data and in the amount of meta-information stored.  Both formats can
be used, for example, to migrate between the different versions of
'gdbm' databases.  Generally speaking, flat files are safe to send over
the network, and can be used to recreate the database on another
machine.  The recreated database is guaranteed to be a byte-to-byte
equivalent of the database from which the flat file was created.  This
does not necessarily mean, however, that this file can be used in the
same way as the original one.  For example, if the original database
contained non-ASCII data (e.g. C structures, integers etc.), the
recreated database can be of any use only if the target machine has the
same integer size and byte ordering as the source one and if its C
compiler uses the same packing conventions as the one which generated C
which populated the original database.  In general, such binary
databases are not portable between machines, unless you follow some
stringent rules on what data is written to them and how it is
interpreted.

   The GDBM version 1.18 supports two flat file formats.  The "binary"
flat file format was first implemented in GDBM version 1.9.1.  This
format stores only key/data pairs, it does not keep information about
the database file itself.  As its name implies, files in this format are
binary files.

   The "ascii" flat file format encodes all data in base64 and stores
not only key/data pairs, but also the original database file metadata,
such as file name, mode and ownership.  Files in this format can be sent
without additional encapsulation over transmission channels that
normally allow only ASCII data, such as, e.g. SMTP. Due to additional
metadata they allow for restoring an exact copy of the database,
including file ownership and privileges, which is especially important
if the database in question contained some security-related data.

   We call a process of creating a flat file from a database "exporting"
or "dumping" this database.  The reverse process, creating the database
from a flat file is called "importing" or "loading" the database.

 -- gdbm interface: int gdbm_dump (GDBM_FILE DBF, const char *FILENAME,
          int FORMAT, int OPEN_FLAGS, int MODE)
     Dumps the database file to the named file in requested format.
     Arguments are:

     DBF
          A pointer to the source database, returned by a prior call to
          'gdbm_open'.

     FILENAME
          Name of the dump file.

     FORMAT
          Output file format.  Allowed values are:
          'GDBM_DUMP_FMT_BINARY' to create a binary dump and
          'GDBM_DUMP_FMT_ASCII' to create an ASCII dump file.

     OPEN_FLAGS
          How to create the output file.  If FLAG is 'GDBM_WRCREAT' the
          file will be created if it does not exist.  If it does exist,
          the 'gdbm_dump' will fail.

          If FLAG is 'GDBM_NEWDB', the function will create a new output
          file, replacing it if it already exists.

     MODE
          The permissions to use when creating the output file.  See
          *note open a file: (open(2))open, for a detailed discussion.

 -- gdbm interface: int gdbm_load (GDBM_FILE *PDBF, const char
          *FILENAME, int FLAG, int META_MASK, unsigned long *ERRLINE)
     Loads data from the dump file FILENAME into the database pointed to
     by PDBF.  The latter can point to 'NULL', in which case the
     function will try to create a new database.  If it succeeds, the
     function will return, in the memory location pointed to by PDBF, a
     pointer to the newly created database.  If the dump file carries no
     information about the original database file name, the function
     will set 'gdbm_errno' to 'GDBM_NO_DBNAME' and return '-1',
     indicating failure.

     The FLAG has the same meaning as the FLAG argument to the
     'gdbm_store' function (*note Store::).

     The META_MASK argument can be used to disable restoring certain
     bits of file's meta-data from the information in the input dump
     file.  It is a binary OR of zero or more of the following:

     GDBM_META_MASK_MODE
          Do not restore file mode.

     GDBM_META_MASK_OWNER
          Do not restore file owner.

     The function returns 0 upon successful completion or -1 on fatal
     errors and 1 on mild (non-fatal) errors.

     If a fatal error occurs, 'gdbm_errno' will be set to one of the
     following values:

     GDBM_FILE_OPEN_ERROR
          Input file (FILENAME) cannot be opened.  The 'errno' variable
          can be used to get more detail about the failure.

     GDBM_MALLOC_ERROR
          Not enough memory to load data.

     GDBM_FILE_READ_ERROR
          Reading from FILENAME failed.  The 'errno' variable can be
          used to get more detail about the failure.

     GDBM_ILLEGAL_DATA
          Input contained some illegal data.

     GDBM_ITEM_NOT_FOUND
          This error can occur only when the input file is in ASCII
          format.  It indicates that the data part of the record about
          to be read lacked length specification.  Application
          developers are advised to treat this error equally as
          'GDBM_ILLEGAL_DATA'.

     Mild errors mean that the function was able to successfully load
     and restore the data, but was unable to change database file
     metadata afterward.  The table below lists possible values for
     'gdbm_errno' in this case.  To get more detail, inspect the system
     'errno' variable.

     GDBM_ERR_FILE_OWNER
          The function was unable to restore database file owner.

     GDBM_ERR_FILE_MODE
          The function was unable to restore database file mode
          (permission bits).

     If an error occurs while loading data from an input file in ASCII
     format, the number of line in which the error occurred will be
     stored in the location pointed to by the ERRLINE parameter, unless
     it is 'NULL'.

     If the line information is not available or applicable, ERRLINE
     will be set to '0'.

 -- gdbm interface: int gdbm_dump_to_file (GDBM_FILE DBF, FILE *FP, int
          FORMAT)
     This is an alternative entry point to 'gdbm_dump' (which see).
     Arguments are:

     DBF
          A pointer to the source database, returned by a call to
          'gdbm_open'.

     FP
          File to write the data to.

     FORMAT
          Format of the dump file.  See the FORMAT argument to the
          'gdbm_dump' function.

 -- gdbm interface: int gdbm_load_from_file (GDBM_FILE *PDBF, FILE *FP,
          int REPLACE, int META_MASK, unsigned long *LINE)
     This is an alternative entry point to 'gdbm_dump'.  It writes the
     output to FP which must be a file open for writing.  The rest of
     arguments is the same as for 'gdbm_load' (excepting of course FLAG,
     which is not needed in this case).

 -- gdbm interface: int gdbm_export (GDBM_FILE DBF, const char
          *EXPORTFILE, int FLAG, int MODE)
     This function is retained for compatibility with GDBM 1.10 and
     earlier.  It dumps the database to a file in binary dump format and
     is entirely equivalent to

          gdbm_dump(DBF, EXPORTFILE, GDBM_DUMP_FMT_BINARY,
                    FLAG, MODE)

 -- gdbm interface: int gdbm_export_to_file (GDBM_FILE DBF, FILE *FP)
     This is an alternative entry point to 'gdbm_export'.  This function
     writes to file FP a binary dump of the database DBF.

 -- gdbm interface: int gdbm_import (GDBM_FILE DBF, const char
          *IMPORTFILE, int FLAG)
     This function is retained for compatibility with GDBM 1.10 and
     earlier.  It loads the file IMPORTFILE, which must be a binary flat
     file, into the database DBF and is equivalent to the following
     construct:

          DBF = gdbm_open (IMPORTFILE, 0,
                                 FLAG == GDBM_REPLACE ?
                                   GDBM_WRCREAT : GDBM_NEWDB,
                                 0600, NULL);
          gdbm_load (&DBF, EXPORTFILE, 0, FLAG, NULL)

 -- gdbm interface: int gdbm_import_from_file (GDBM_FILE DBF, FILE *FP,
          int FLAG)
     An alternative entry point to 'gdbm_import'.  Reads the binary dump
     from the file FP and stores the key/value pairs to DBF.  *Note
     Store::, for a description of FLAG.

     This function is equivalent to:

          DBF = gdbm_open (IMPORTFILE, 0,
                                 FLAG == GDBM_REPLACE ?
                                   GDBM_WRCREAT : GDBM_NEWDB,
                                 0600, NULL);
          gdbm_load_from_file (DBF, FP, FLAG, 0, NULL);


File: gdbm.info,  Node: Errors,  Next: Recovery,  Prev: Flat files,  Up: Top

14 Error handling.
******************

The global variable 'gdbm_errno' (*note gdbm_errno: Variables.) keeps
the error code of the most recent error encountered by GDBM functions.

   To convert this code to human-readable string, use the following
function:

 -- gdbm interface: const char * gdbm_strerror (gdbm_error ERRNO)
     Converts ERRNO (which is an integer value) into a human-readable
     descriptive text.  Returns a pointer to a static string.  The
     caller must not alter or free the returned pointer.

   Detailed information about the most recent error that occurred while
operating on a GDBM file is stored in the 'GDBM_FILE' object itself.  To
retrieve it, the following functions are provided:

 -- gdbm interface: gdbm_error gdbm_last_errno (GDBM_FILE DBF)
     Returns the code of the most recent error encountered when
     operating on DBF.

 -- gdbm interface: int gdbm_last_syserr (GDBM_FILE DBF)
     Returns the value of the system 'errno' variable associated with
     the most recent error.

     Notice, that not all GDBM errors have an associated system error
     code.  The following are the ones that have:

        * GDBM_FILE_OPEN_ERROR
        * GDBM_FILE_WRITE_ERROR
        * GDBM_FILE_SEEK_ERROR
        * GDBM_FILE_READ_ERROR
        * GDBM_FILE_STAT_ERROR
        * GDBM_BACKUP_FAILED

     For other errors, 'gdbm_last_syserr' will return 0.

 -- gdbm interface: int gdbm_check_syserr (gdbm_errno ERR)
     Returns '1', if system errno value should be checked to get more
     info on the error described by GDBM code ERR.

   To get a human-readable description of the recent error for a
particular database file, use the 'gdbm_db_strerror' function:

 -- gdbm interface: const char * gdbm_db_strerror (GDBM_FILE DBF)
     Returns textual description of the most recent error encountered
     when operating on the database DBF.  The resulting string is often
     more informative than what would be returned by
     'gdbm_strerror(gdbm_last_errno(DBF))'.  In particular, if there is
     a system error associated with the recent failure, it will be
     described as well.

 -- gdbm interface: void gdbm_clear_error (GDBM_FILE DBF)
     Clears the error state for the database DBF.  Normally, this
     function is called upon the entry to any GDBM function.

   Certain errors (such as write error when saving stored key) can leave
database file in inconistent state.  When such a critical error occurs,
the database file is marked as needing recovery.  Subsequent calls to
any GDBM functions for that database file (except 'gdbm_recover'), will
return immediately with GDBM error value 'GDBM_NEED_RECOVERY'.
Additionally, the following function can be used to check the state of
the database file:

 -- gdbm interface: int gdbm_needs_recovery (GDBM_FILE DBF)
     Returns '1' if the database file DBF is in inconsistent state and
     needs recovery.

   The only way to bring the database back to operational state is to
call the 'gdbm_recover' function (*note Recovery::).


File: gdbm.info,  Node: Recovery,  Next: Options,  Prev: Errors,  Up: Top

15 Recovery
***********

Certain errors (such as write error when saving stored key) can leave
database file in "inconistent state".  When such a critical error
occurs, the database file is marked as needing recovery.  Subsequent
calls to any GDBM functions for that database file (except
'gdbm_recover'), will return immediately with GDBM error value
'GDBM_NEED_RECOVERY'.

   To escape from this state and bring the database back to operational
state, use the following function:

 -- gdbm interface: int gdbm_recover (GDBM_FILE DBF, gdbm_recovery
          *RCVR, int FLAGS)
     Check the database file DBF and fix eventual errors.  The RCVR
     argument points to a structure that has "input members", providing
     additional information to alter the behavior of 'gdbm_recover', and
     "output members", used to return additional statistics about the
     recovery process (RCVR can be 'NULL' if no such information is
     needed).

     Each input member has a corresponding flag bit, which must be set
     in the FLAGS in order to instruct the function to use it.

     The 'gdbm_recover' type is defined as:

          typedef struct gdbm_recovery_s
          {
            /* Input members.
               These are initialized before call to gdbm_recover.
               The flags argument specifies which of them are initialized. */
            void (*errfun) (void *data, char const *fmt, ...);
            void *data;
            size_t max_failed_keys;
            size_t max_failed_buckets;
            size_t max_failures;

            /* Output members.
               The gdbm_recover function fills these before returning. */
            size_t recovered_keys;
            size_t recovered_buckets;
            size_t failed_keys;
            size_t failed_buckets;
            char *backup_name;
          } gdbm_recovery;

     The "input members" modify the behavior of 'gdbm_recover':

      -- input member on gdbm_recovery: void (*errfun) (void *DATA, char
               const *FMT, ...)
          If the 'GDBM_RCVR_ERRFUN' flag bit is set, 'errfun' points to
          a function that will be called upon each recoverable or
          non-fatal error that occurred during the recovery.

      -- input member of gdbm_recovery: void * data
          Supplies first argument for the 'errfun' invocations.

      -- input member of gdbm_recovery: size_t max_failed_keys
          If 'GDBM_RCVR_MAX_FAILED_KEYS' is set, this member sets the
          limit on the number of keys that cannot be retrieved.  If the
          number of failed keys grows bigger than 'max_failed_keys',
          recovery is aborted and error is returned.

      -- input member of gdbm_recovery: size_t max_failed_buckets
          If 'GDBM_RCVR_MAX_FAILED_BUCKETS' is set, this member sets the
          limit on the number of buckets that cannot be retrieved or
          that contain bogus information.  If the number of failed
          buckets grows bigger than 'max_failed_buckets', recovery is
          aborted and error is returned.

      -- output member of gdbm_recovery: size_t max_failures
          If 'GDBM_RCVR_MAX_FAILURES' is set, this member sets the limit
          of failures that are tolerated during recovery.  If the number
          of errors grows bigger than 'max_failures', recovery is
          aborted and error is returned.

     The following members are filled on output, upon successful return
     from the function:

      -- output member of gdbm_recovery: size_t recovered_keys
          Number of recovered keys.

      -- output member of gdbm_recovery: size_t recovered_buckets
          Number of recovered buckets.

      -- output member of gdbm_recovery: size_t failed_keys
          Number of key/data pairs that cannot be retrieved.

      -- output member of gdbm_recovery: size_t failed_buckets
          Number of buckets that cannot be retrieved.

      -- output member of gdbm_recovery: char * backup_name
          Name of the file keeping the copy of the original database, in
          the state prior to recovery.  It is filled if the
          GDBM_RCVR_BACKUP flag is set.  The string is allocated using
          the 'malloc' call.  The caller is responsible for freeing that
          memory when no longer needed.

   By default, 'gdbm_recovery' first checks the database fo
inconsistencies and attempts recovery only if some were found.  The
special flag bit 'GDBM_RCVR_FORCE' instructs 'gdbm_recovery' to omit
this check and to force recovery unconditionally.


File: gdbm.info,  Node: Options,  Next: Locking,  Prev: Recovery,  Up: Top

16 Setting options
******************

'Gdbm' supports the ability to set certain options on an already open
database.

 -- gdbm interface: int gdbm_setopt (GDBM_FILE DBF, int OPTION, void
          *VALUE, int SIZE)
     Sets an option on the database or returns the value of an option.

     The parameters are:

     DBF
          The pointer returned by 'gdbm_open'.
     OPTION
          The option to be set or retrieved.
     VALUE
          A pointer to the value to which OPTION will be set or where to
          place the option value (depending on the option).
     SIZE
          The length of the data pointed to by VALUE.

   The valid options are:

GDBM_SETCACHESIZE
GDBM_CACHESIZE
     Set the size of the internal bucket cache.  This option may only be
     set once on each GDBM_FILE descriptor, and is set automatically to
     100 upon the first access to the database.  The VALUE should point
     to a 'size_t' holding the desired cache size.

     The 'GDBM_CACHESIZE' option is provided for compatibility with
     earlier versions.

GDBM_GETCACHESIZE
     Return the size of the internal bucket cache.  The VALUE should
     point to a 'size_t' variable, where the size will be stored.

GDBM_GETFLAGS
     Return the flags describing the state of the database.  The VALUE
     should point to a 'int' variable where to store the flags.  The
     return is the same as the flags used when opening the database
     (*note gdbm_open: Open.), except that it reflects the current state
     (which may have been altered by another calls to 'gdbm_setopt'.

GDBM_FASTMODE
     Enable or disable the "fast writes mode", i.e. writes without
     subsequent synchronization.  The VALUE should point to an integer:
     'TRUE' to enable fast mode, and 'FALSE' to disable it.

     This option is retained for compatibility with previous versions of
     'gdbm'.  Its effect is the reverse of 'GDBM_SETSYNCMODE' (see
     below).

GDBM_SETSYNCMODE
GDBM_SYNCMODE
     Turn on or off file system synchronization operations.  This
     setting defaults to off.  The VALUE should point to an integer:
     'TRUE' to turn synchronization on, and 'FALSE' to turn it off.

     Note, that this option is a reverse of 'GDBM_FASTMODE', i.e.
     calling 'GDBM_SETSYNCMODE' with 'TRUE' has the same effect as
     calling 'GDBM_FASTMODE' with 'FALSE'.

     The 'GDBM_SYNCMODE' option is provided for compatibility with
     earlier versions.

GDBM_GETSYNCMODE
     Return the current synchronization status.  The VALUE should point
     to an 'int' where the status will be stored.

GDBM_SETCENTFREE
GDBM_CENTFREE
     _NOTICE: This feature is still under study._

     Set central free block pool to either on or off.  The default is
     off, which is how previous versions of 'gdbm' handled free blocks.
     If set, this option causes all subsequent free blocks to be placed
     in the _global_ pool, allowing (in theory) more file space to be
     reused more quickly.  The VALUE should point to an integer: 'TRUE'
     to turn central block pool on, and 'FALSE' to turn it off.

     The 'GDBM_CENTFREE' option is provided for compatibility with
     earlier versions.

GDBM_SETCOALESCEBLKS
GDBM_COALESCEBLKS
     _NOTICE: This feature is still under study._

     Set free block merging to either on or off.  The default is off,
     which is how previous versions of 'gdbm' handled free blocks.  If
     set, this option causes adjacent free blocks to be merged.  This
     can become a CPU expensive process with time, though, especially if
     used in conjunction with GDBM_CENTFREE. The VALUE should point to
     an integer: 'TRUE' to turn free block merging on, and 'FALSE' to
     turn it off.

GDBM_GETCOALESCEBLKS
     Return the current status of free block merging.  The VALUE should
     point to an 'int' where the status will be stored.

GDBM_SETMAXMAPSIZE
     Sets maximum size of a memory mapped region.  The VALUE should
     point to a value of type 'size_t', 'unsigned long' or 'unsigned'.
     The actual value is rounded to the nearest page boundary (the page
     size is obtained from 'sysconf(_SC_PAGESIZE)').

GDBM_GETMAXMAPSIZE
     Return the maximum size of a memory mapped region.  The VALUE
     should point to a value of type 'size_t' where to return the data.

GDBM_SETMMAP
     Enable or disable memory mapping mode.  The VALUE should point to
     an integer: 'TRUE' to enable memory mapping or 'FALSE' to disable
     it.

GDBM_GETMMAP
     Check whether memory mapping is enabled.  The VALUE should point to
     an integer where to return the status.

GDBM_GETDBNAME
     Return the name of the database disk file.  The VALUE should point
     to a variable of type 'char**'.  A pointer to the newly allocated
     copy of the file name will be placed there.  The caller is
     responsible for freeing this memory when no longer needed.  For
     example:

          char *name;

          if (gdbm_setopt (dbf, GDBM_GETDBNAME, &name, sizeof (name)))
            {
               fprintf (stderr, "gdbm_setopt failed: %s\n",
                        gdbm_strerror (gdbm_errno));
            }
          else
            {
              printf ("database name: %s\n", name);
              free (name);
            }

GDBM_GETBLOCKSIZE
     Return the block size in bytes.  The VALUE should point to 'int'.

   The return value will be '-1' upon failure, or '0' upon success.  The
global variable 'gdbm_errno' will be set upon failure.

   For instance, to set a database to use a cache of 10, after opening
it with 'gdbm_open', but prior to accessing it in any way, the following
code could be used:

     int value = 10;
     ret = gdbm_setopt (dbf, GDBM_CACHESIZE, &value, sizeof (int));


File: gdbm.info,  Node: Locking,  Next: Variables,  Prev: Options,  Up: Top

17 File Locking.
****************

With locking disabled (if 'gdbm_open' was called with 'GDBM_NOLOCK'),
the user may want to perform their own file locking on the database file
in order to prevent multiple writers operating on the same file
simultaneously.

   In order to support this, the 'gdbm_fdesc' routine is provided.

 -- gdbm interface: int gdbm_fdesc (GDBM_FILE DBF)
     Returns the file descriptor of the database DBF.  This value can be
     used as an argument to 'flock', 'lockf' or similar calls.


File: gdbm.info,  Node: Variables,  Next: Error codes,  Prev: Locking,  Up: Top

18 Useful global variables.
***************************

The following global variables and constants are available:

 -- Variable: gdbm_error gdbm_errno
     This variable contains error code from the last failed 'gdbm' call.
     *Note Error codes::, for a list of available error codes and their
     descriptions.

     Use 'gdbm_strerror' (*note Errors::) to convert it to a descriptive
     text.

 -- Variable: const char * gdbm_errlist[]
     This variable is an array of error descriptions, which is used by
     'gdbm_strerror' to convert error codes to human-readable text
     (*note Errors::).  You can access it directly, if you wish so.  It
     contains '_GDBM_MAX_ERRNO + 1' elements and can be directly indexed
     by the error code to obtain a corresponding descriptive text.

 -- Variable: int const gdbm_syserr[]
     Array of boolean values indicating, for each GDBM error code,
     whether the value of 'errno'(3) variable is meaningful for this
     error code.  *Note gdbm_check_syserr::.

 -- Constant: _GDBM_MIN_ERRNO
     The minimum error code used by 'gdbm'.

 -- Constant: _GDBM_MAX_ERRNO
     The maximum error code used by 'gdbm'.

 -- Variable: const char * gdbm_version
     A string containing the version information.

 -- Variable: int const gdbm_version_number[3]
     This variable contains the 'gdbm' version numbers:

     Index                         Meaning
     -------------------------------------------------------------------
     0                             Major number
     1                             Minor number
     2                             Patchlevel number

     Additionally, the following constants are defined in the 'gdbm.h'
     file:

     GDBM_VERSION_MAJOR
          Major number.

     GDBM_VERSION_MINOR
          Minor number.

     GDBM_VERSION_PATCH
          Patchlevel number.

     These can be used to verify whether the header file matches the
     library.

   To compare two split-out version numbers, use the following function:

 -- gdbm interface: int gdbm_version_cmp (int const A[3], int const
          B[3])
     Compare two version numbers.  Return '-1' if A is less than B, '1'
     if A is greater than B and '0' if they are equal.

     Comparison is done from left to right, so that:

          a = { 1, 8, 3 };
          b = { 1, 8, 3 };
          gdbm_version_cmp (a, b) => 0

          a = { 1, 8, 3 };
          b = { 1, 8, 2 };
          gdbm_version_cmp (a, b) => 1

          a = { 1, 8, 3 };
          b = { 1, 9. 0 };
          gdbm_version_cmp (a, b) => -1


File: gdbm.info,  Node: Error codes,  Next: Compatibility,  Prev: Variables,  Up: Top

19 Error codes
**************

This chapter summarizes error codes which can be set by the functions in
'gdbm' library.

GDBM_NO_ERROR
     No error occurred.

GDBM_MALLOC_ERROR
     Memory allocation failed.  Not enough memory.

GDBM_BLOCK_SIZE_ERROR
     This error is set by the 'gdbm_open' function (*note Open::), if
     the value of its BLOCK_SIZE argument is incorrect and the
     'GDBM_BSEXACT' flag is set.

GDBM_FILE_OPEN_ERROR
     The library was not able to open a disk file.  This can be set by
     'gdbm_open' (*note Open::), 'gdbm_export' and 'gdbm_import'
     functions (*note Flat files::).

     Inspect the value of the system 'errno' variable to get more
     detailed diagnostics.

GDBM_FILE_WRITE_ERROR
     Writing to a disk file failed.  This can be set by 'gdbm_open'
     (*note Open::), 'gdbm_export' and 'gdbm_import' functions.

     Inspect the value of the system 'errno' variable to get more
     detailed diagnostics.

GDBM_FILE_SEEK_ERROR
     Positioning in a disk file failed.  This can be set by 'gdbm_open'
     (*note Open::) function.

     Inspect the value of the system 'errno' variable to get a more
     detailed diagnostics.

GDBM_FILE_READ_ERROR
     Reading from a disk file failed.  This can be set by 'gdbm_open'
     (*note Open::), 'gdbm_export' and 'gdbm_import' functions.

     Inspect the value of the system 'errno' variable to get a more
     detailed diagnostics.

GDBM_BAD_MAGIC_NUMBER
     The file given as argument to 'gdbm_open' function is not a valid
     'gdbm' file: it has a wrong magic number.

GDBM_EMPTY_DATABASE
     The file given as argument to 'gdbm_open' function is not a valid
     'gdbm' file: it has zero length.

GDBM_CANT_BE_READER
     This error code is set by the 'gdbm_open' function if it is not
     able to lock file when called in 'GDBM_READER' mode (*note
     GDBM_READER: Open.).

GDBM_CANT_BE_WRITER
     This error code is set by the 'gdbm_open' function if it is not
     able to lock file when called in writer mode (*note Open::).

GDBM_READER_CANT_DELETE
     Set by the 'gdbm_delete' (*note Delete::) if it attempted to
     operate on a database that is open in read-only mode (*note
     GDBM_READER: Open.).

GDBM_READER_CANT_STORE
     Set by the 'gdbm_store' (*note Store::) if it attempted to operate
     on a database that is open in read-only mode (*note GDBM_READER:
     Open.).

GDBM_READER_CANT_REORGANIZE
     Set by the 'gdbm_reorganize' (*note Reorganization::) if it
     attempted to operate on a database that is open in read-only mode
     (*note GDBM_READER: Open.).

GDBM_ITEM_NOT_FOUND
     Requested item was not found.  This error is set by 'gdbm_delete'
     (*note Delete::) and 'gdbm_fetch' (*note Fetch::) when the
     requested KEY value is not found in the database.

GDBM_REORGANIZE_FAILED
     The 'gdbm_reorganize' function is not able to create a temporary
     database.  *Note Reorganization::.

GDBM_CANNOT_REPLACE
     Cannot replace existing item.  This error is set by the
     'gdbm_store' if the requested KEY value is found in the database
     and the FLAG parameter is not 'GDBM_REPLACE'.  *Note Store::, for a
     detailed discussion.

GDBM_ILLEGAL_DATA
     Either KEY or CONTENT parameter was wrong in a call to to
     'gdbm_store' (*note Store::).

GDBM_OPT_ALREADY_SET
     Requested option can be set only once and was already set.  This
     error is returned by the 'gdbm_setopt' function.  *Note
     GDBM_CACHESIZE: Options.

GDBM_OPT_ILLEGAL
     The OPTION argument is not valid or the VALUE argument points to an
     invalid value in a call to 'gdbm_setopt' function.  *Note
     Options::.

GDBM_BYTE_SWAPPED
     The 'gdbm_open' function (*note Open::) attempts to open a database
     which is created on a machine with different byte ordering.

GDBM_BAD_FILE_OFFSET
     The 'gdbm_open' function (*note Open::) sets this error code if the
     file it tries to open has a wrong magic number.

GDBM_BAD_OPEN_FLAGS
     Set by the 'gdbm_export' function if supplied an invalid FLAGS
     argument.  *Note Flat files::.

GDBM_FILE_STAT_ERROR
     Getting information about a disk file failed.  The system 'errno'
     will give more details about the error.

     This error can be set by the following functions: 'gdbm_open',
     'gdbm_reorganize'.

GDBM_FILE_EOF
     End of file was encountered where more data was expected to be
     present.  This error can occur when fetching data from the database
     and usually means that the database is truncated or otherwise
     corrupted.

     This error can be set by any GDBM function that does I/O. Some of
     these functions are: 'gdbm_delete', 'gdbm_exists', 'gdbm_fetch',
     'gdbm_export', 'gdbm_import', 'gdbm_reorganize', 'gdbm_firstkey',
     'gdbm_nextkey', 'gdbm_store'.

GDBM_NO_DBNAME
     Output database name is not specified.  This error code is set by
     'gdbm_load' (*note gdbm_load: gdbm_load function.) if the first
     argument points to 'NULL' and the input file does not specify the
     database name.

GDBM_ERR_FILE_OWNER
     This error code is set by 'gdbm_load' if it is unable to restore
     database file owner.  It is a mild error condition, meaning that
     the data have been restored successfully, only changing the target
     file owner failed.  Inspect the system 'errno' variable to get a
     more detailed diagnostics.

GDBM_ERR_FILE_MODE
     This error code is set by 'gdbm_load' if it is unable to restore
     database file mode.  It is a mild error condition, meaning that the
     data have been restored successfully, only changing the target file
     owner failed.  Inspect the system 'errno' variable to get a more
     detailed diagnostics.

GDBM_NEED_RECOVERY
     Database is in inconsistent state and needs recovery.  Call
     'gdbm_recover' if you get this error.  *Note Recovery::, for a
     detailed description of recovery functions.

GDBM_BACKUP_FAILED
     The GDBM engine is unable to create backup copy of the file.

GDBM_DIR_OVERFLOW
     Bucket directory would overflow the size limit during an attempt to
     split hash bucket.  This error can occur while storing a new key.


File: gdbm.info,  Node: Compatibility,  Next: gdbmtool,  Prev: Error codes,  Up: Top

20 Compatibility with standard 'dbm' and 'ndbm'.
************************************************

'Gdbm' includes a compatibility layer, which provides traditional 'ndbm'
and older 'dbm' functions.  The layer is compiled and installed if the
'--enable-libgdbm-compat' option is used when configuring the package.

   The compatibility layer consists of two header files: 'ndbm.h' and
'dbm.h' and the 'libgdbm_compat' library.

   Older programs using 'ndbm' or 'dbm' interfaces can use
'libgdbm_compat' without any changes.  To link a program with the
compatibility library, add the following two options to the 'cc'
invocation: '-lgdbm -lgdbm_compat'.  The '-L' option may also be
required, depending on where 'gdbm' is installed, e.g.:

     cc ... -lgdbm -lgdbm_compat

   Databases created and manipulated by the compatibility interfaces
consist of two different files: 'FILE.dir' and 'FILE.pag'.  This is
required by the POSIX specification and corresponds to the traditional
usage.  Note, however, that despite the similarity of the naming
convention, actual data stored in these files has not the same format as
in the databases created by other 'dbm' or 'ndbm' libraries.  In other
words, you cannot access a standard UNIX 'dbm' file with GNU 'dbm'!

   GNU 'dbm' files are not 'sparse'.  You can copy them with the usual
'cp' command and they will not expand in the copying process.

* Menu:

* ndbm::  NDBM interface functions.
* dbm::   DBM interface functions.


File: gdbm.info,  Node: ndbm,  Next: dbm,  Up: Compatibility

20.1 NDBM interface functions.
==============================

The functions below implement the POSIX 'ndbm' interface:

 -- ndbm: DBM * dbm_open (char *FILE, int FLAGS, int MODE)
     Opens a database.  The FILE argument is the full name of the
     database file to be opened.  The function opens two files:
     'FILE.pag' and 'FILE.dir'.  The FLAGS and MODE arguments have the
     same meaning as the second and third arguments of 'open' (*note
     open a file: (open(2))open.), except that a database opened for
     write-only access opens the files for read and write access and the
     behavior of the 'O_APPEND' flag is unspecified.

     The function returns a pointer to the 'DBM' structure describing
     the database.  This pointer is used to refer to this database in
     all operations described below.

     Any error detected will cause a return value of 'NULL' and an
     appropriate value will be stored in 'gdbm_errno' (*note
     Variables::).

 -- ndbm: void dbm_close (DBM *DBF)
     Closes the database.  The DBF argument must be a pointer returned
     by an earlier call to 'dbm_open'.

 -- ndbm: datum dbm_fetch (DBM *DBF, datum KEY)
     Reads a record from the database with the matching key.  The KEY
     argument supplies the key that is being looked for.

     If no matching record is found, the 'dptr' member of the returned
     datum is 'NULL'.  Otherwise, the 'dptr' member of the returned
     datum points to the memory managed by the compatibility library.
     The application should never free it.

 -- ndbm: int dbm_store (DBM *DBF, datum KEY, datum CONTENT, int MODE)
     Writes a key/value pair to the database.  The argument DBF is a
     pointer to the 'DBM' structure returned from a call to 'dbm_open'.
     The KEY and CONTENT provide the values for the record key and
     content.  The MODE argument controls the behavior of 'dbm_store' in
     case a matching record already exists in the database.  It can have
     one of the following two values:

     'DBM_REPLACE'
          Replace existing record with the new one.

     'DBM_INSERT'
          The existing record is left unchanged, and the function
          returns '1'.

     If no matching record exists in the database, new record will be
     inserted no matter what the value of the MODE is.

 -- ndbm: int dbm_delete (DBM *DBF, datum KEY)
     Deletes the record with the matching key from the database.  If the
     function succeeds, '0' is returned.  Otherwise, if no matching
     record is found or if an error occurs, '-1' is returned.

 -- ndbm: datum dbm_firstkey (DBM *DBF)
     Initializes iteration over the keys from the database and returns
     the first key.  Note, that the word 'first' does not imply any
     specific ordering of the keys.

     If there are no records in the database, the 'dptr' member of the
     returned datum is 'NULL'.  Otherwise, the 'dptr' member of the
     returned datum points to the memory managed by the compatibility
     library.  The application should never free it.

 -- ndbm: datum dbm_nextkey (DBM *DBF)
     Continues the iteration started by 'dbm_firstkey'.  Returns the
     next key in the database.  If the iteration covered all keys in the
     database, the 'dptr' member of the returned datum is 'NULL'.
     Otherwise, the 'dptr' member of the returned datum points to the
     memory managed by the compatibility library.  The application
     should never free it.

     The usual way of iterating over all the records in the database is:

          for (key = dbm_firstkey (dbf);
               key.ptr;
               key = dbm_nextkey (dbf))
            {
              /* do something with the key */
            }

     The loop above should not try to delete any records from the
     database, otherwise the iteration is not guaranteed to cover all
     the keys.  *Note Sequential::, for a detailed discussion of this.

 -- ndbm: int dbm_error (DBM *DBF)
     Returns the error condition of the database: '0' if no errors
     occurred so far while manipulating the database, and a non-zero
     value otherwise.

 -- ndbm: void dbm_clearerr (DBM *DBF)
     Clears the error condition of the database.

 -- ndbm: int dbm_dirfno (DBM *DBF)
     Returns the file descriptor of the 'dir' file of the database.  It
     is guaranteed to be different from the descriptor returned by the
     'dbm_pagfno' function (see below).

     The application can lock this descriptor to serialize accesses to
     the database.

 -- ndbm: int dbm_pagfno (DBM *DBF)
     Returns the file descriptor of the 'pag' file of the database.  See
     also 'dbm_dirfno'.

 -- ndbm: int dbm_rdonly (DBM *DBF)
     Returns '1' if the database DBF is open in a read-only mode and '0'
     otherwise.


File: gdbm.info,  Node: dbm,  Prev: ndbm,  Up: Compatibility

20.2 DBM interface functions.
=============================

The functions below are provided for compatibility with the old UNIX
'DBM' interface.  Only one database at a time can be manipulated using
them.

 -- dbm: int dbminit (char *FILE)
     Opens a database.  The FILE argument is the full name of the
     database file to be opened.  The function opens two files:
     'FILE.pag' and 'FILE.dir'.  If any of them does not exist, the
     function fails.  It never attempts to create the files.

     The database is opened in the read-write mode, if its disk
     permissions permit.

     The application must ensure that the functions described below in
     this section are called only after a successful call to 'dbminit'.

 -- dbm: int dbmclose (void)
     Closes the database opened by an earlier call to 'dbminit'.

 -- dbm: datum fetch (datum KEY)
     Reads a record from the database with the matching key.  The KEY
     argument supplies the key that is being looked for.

     If no matching record is found, the 'dptr' member of the returned
     datum is 'NULL'.  Otherwise, the 'dptr' member of the returned
     datum points to the memory managed by the compatibility library.
     The application should never free it.

 -- dbm: int store (datum KEY, datum CONTENT)
     Stores the key/value pair in the database.  If a record with the
     matching key already exists, its content will be replaced with the
     new one.

     Returns '0' on success and '-1' on error.

 -- dbm: int delete (datum KEY)
     Deletes a record with the matching key.

     If the function succeeds, '0' is returned.  Otherwise, if no
     matching record is found or if an error occurs, '-1' is returned.

 -- dbm: datum firstkey (void)
     Initializes iteration over the keys from the database and returns
     the first key.  Note, that the word 'first' does not imply any
     specific ordering of the keys.

     If there are no records in the database, the 'dptr' member of the
     returned datum is 'NULL'.  Otherwise, the 'dptr' member of the
     returned datum points to the memory managed by the compatibility
     library.  The application should never free it.

 -- dbm: datum nextkey (datum KEY)
     Continues the iteration started by a call to 'firstkey'.  Returns
     the next key in the database.  If the iteration covered all keys in
     the database, the 'dptr' member of the returned datum is 'NULL'.
     Otherwise, the 'dptr' member of the returned datum points to the
     memory managed by the compatibility library.  The application
     should never free it.


File: gdbm.info,  Node: gdbmtool,  Next: gdbm_dump,  Prev: Compatibility,  Up: Top

21 Examine and modify a GDBM database.
**************************************

The 'gdbmtool' utility allows you to view and modify an existing GDBM
database or to create a new one.

   When invoked without arguments, it tries to open a database file
called 'junk.gdbm', located in the current working directory.  You can
change this default by supplying the name of the database as argument to
the program, e.g.:

     $ gdbmtool file.db

   The database will be opened in read-write mode, unless the '-r'
('--read-only') option is specified, in which case it will be opened
only for reading.

   If the database does not exist, 'gdbmtool' will create it.  There is
a special option '-n' ('--newdb', which instructs the utility to create
a new database.  If it is used and if the database already exists, it
will be deleted, so use it sparingly.

* Menu:

* invocation::
* shell::


File: gdbm.info,  Node: invocation,  Next: shell,  Up: gdbmtool

21.1 gdbmtool invocation
========================

When started without additional arguments, 'gdbmtool' operates on the
default database 'junk.gdbm'.  Otherwise, the first argument supplies
the name of the database to operate upon.  If neither any additional
arguments nor the '-f' ('--file') option are given, 'gdbmtool' opens
starts interactive shell and receives commands directly from the human
operator.

   If more than one arguments are given, all arguments past the database
name are parsed as 'gdbmtool' commands (*note shell::, for a description
of available commands) and executed in turn.  All commands, except the
last one, should be terminated with semicolons.  Semicolon after the
last command is optional.  Note, that semicolons should be escaped in
order to prevent them from being interpreted by the shell.

   Finally, if the '-f' ('--file') option is supplied, its argument
specifies the name of the disk file with 'gdbmtool' script.  The program
will open that file and read commands from it.

   The following table summarizes all 'gdbmtool' command line options:

'-b SIZE'
'--block-size=SIZE'
     Set block size.
'-c SIZE'
'--cache-size=SIZE'
     Set cache size.
'-f FILE'
'--file FILE'
     Read commands from FILE, instead of the standard input.
'-h'
'--help'
     Print a concise help summary.
'-N'
'--norc'
     Don't read startup files (*note startup files::).
'-n'
'--newdb'
     Create the database.
'-l'
'--no-lock'
     Disable file locking.
'-m'
'--no-mmap'
     Disable mmap.
'-q'
'--quiet'
     Don't print the usual welcome banner at startup.  This is the same
     as setting the variable 'quiet' in the startup file.  *Note
     quiet::.
'-r'
'--read-only'
     Open the database in read-only mode.
'-s'
'--synchronize'
     Synchronize to the disk after each write.
'-V'
'--version'
     Print program version and licensing information and exit.
'--usage'
     Print a terse invocation syntax summary along with a list of
     available command line options.


File: gdbm.info,  Node: shell,  Prev: invocation,  Up: gdbmtool

21.2 gdbmtool interactive mode
==============================

After successful startup, 'gdbmtool' starts a loop, in which it reads
commands from the standard input, executes them and prints results on
the standard output.  If the standard input is attached to a console,
'gdbmtool' runs in interactive mode, which is indicated by its "prompt":

     gdbmtool> _

   The utility finishes when it reads the 'quit' command (see below) or
detects end-of-file on its standard input, whichever occurs first.

   A 'gdbmtool' command consists of a "command verb", optionally
followed by "arguments", separated by any amount of white space and
terminated with a newline or semicolon.  A command verb can be entered
either in full or in an abbreviated form, as long as that abbreviation
does not match any other verb.  For example, 'co' can be used instead of
'count' and 'ca' instead of 'cache'.

   Any sequence of non-whitespace characters appearing after the command
verb forms an argument.  If the argument contains whitespace or
unprintable characters it must be enclosed in double quotes.  Within
double quotes the usual "escape sequences" are understood, as shown in
the table below:

Sequence               Replaced with
\a                     Audible bell character (ASCII 7)
\b                     Backspace character (ASCII 8)
\f                     Form-feed character (ASCII 12)
\n                     Newline character (ASCII 10)
\r                     Carriage return character (ASCII
                       13)
\t                     Horizontal tabulation character
                       (ASCII 9)
\v                     Vertical tabulation character
                       (ASCII 11)
\\                     Single slash
\"                     Double quote

Table 21.1: Backslash escapes

   In addition, a backslash immediately followed by the end-of-line
character effectively removes that character, allowing to split long
arguments over several input lines.

   Command parameters may be optional or mandatory.  If the number of
actual arguments is less than the number of mandatory parameters,
'gdbmtool' will prompt you to supply missing arguments.  For example,
the 'store' command takes two mandatory parameters, so if you invoked it
with no arguments, you would be prompted twice to supply the necessary
data, as shown in example below:

     gdbmtool> store
     key? three
     data? 3

   However, such prompting is possible only in interactive mode.  In
non-interactive mode (e.g. when running a script), all arguments must be
supplied with each command, otherwise 'gdbmtool' will report an error
and exit immediately.

   If the package is compiled with GNU Readline, the input line can be
edited (*note Command Line Editing: (readline)Command Line Editing.).

* Menu:

* variables::      shell variables.
* commands::       shell commands.
* definitions::    how to define structured data.
* startup files::


File: gdbm.info,  Node: variables,  Next: commands,  Up: shell

21.2.1 Shell Variables
----------------------

A number of 'gdbmtool' parameters is kept in its internal variables.

 -- gdbmtool variable: bool confirm
     Whether to ask for confirmation before certain destructive
     operations, such as truncating the existing database.

     Default is 'true'.

 -- gdbmtool variable: string ps1
     Primary prompt string.  Its value can contain "conversion
     specifiers", consisting of the '%' character followed by another
     character.  These specifiers are expanded in the resulting prompt
     as follows:

     Sequence                      Expansion
     -------------------------------------------------------------------
     %f                            name of the current database file
     %p                            program invocation name
     %P                            package name ('GDBM')
     %v                            program version
     %_                            single space character
     %%                            %

     The default value is '%p>%_', i.e.  the program name, followed by a
     "greater than" sign, followed by a single space.

 -- gdbmtool variable: string ps2
     Secondary prompt.  See 'ps1' for a description of its value.  This
     prompt is displayed before reading the second and subsequent lines
     of a multi-line command.

     The default value is '%_>%_'.

 -- gdbmtool variable: string delim1
     A string used to delimit fields of a structured datum on output
     (*note definitions::).

     Default is ',' (a comma).  This variable cannot be unset.

 -- gdbmtool variable: string delim2
     A string used to delimit array items when printing a structured
     datum (*note definitions::).

     Default is ',' (a comma).  This variable cannot be unset.

 -- gdbmtool variable: string pager
     The name and command line of the pager program to pipe output to.
     This program is used in interactive mode when the estimated number
     of output lines is greater then the number of lines on your screen.

     The default value is inherited from the environment variable
     'PAGER'.  Unsetting this variable disables paging.

 -- gdbmtool variable: bool quiet
     Whether to display a welcome banner at startup.  This variable
     should be set in a startup script file (*note startup files::).
     *Note -q option::.

   The following variables control how the database is opened:

 -- gdbmtool variable: numeric blocksize
     Sets the block size.  *Note block_size: Open.  Unset by default.

 -- gdbmtool variable: numeric cachesize
     Sets the cache size.  *Note GDBM_SETCACHESIZE: Options.  By default
     this variable is not set.

 -- gdbmtool variable: string open
     Open mode.  The following values are allowed:

     newdb
          Truncate the database if it exists or create a new one.  Open
          it in read-write mode.

          Technically, this sets the 'GDBM_NEWDB' flag in call to
          'gdbm_open'.  *Note GDBM_NEWDB: Open.
     wrcreat
     rw
          Open the database in read-write mode.  Create it if it does
          not exist.  This is the default.

          Technically speaking, it sets the 'GDBM_WRCREAT' flag in call
          to 'gdbm_open'.  *Note GDBM_WRCREAT: Open.
     reader
     readonly
          Open the database in read-only mode.  Signal an error if it
          does not exist.

          This sets the 'GDBM_READER' flag (*note GDBM_READER: Open.).

     Attempting to set any other value or to unset this variable
     produces an error.

 -- gdbmtool variable: number filemode
     File mode (in octal) for creating new database files and database
     dumps.

 -- gdbmtool variable: bool lock
     Lock the database.  This is the default.

     Setting this variable to false or unsetting it results in passing
     'GDBM_NOLOCK' flag to 'gdbm_open' (*note GDBM_NOLOCK: Open.).

 -- gdbmtool variable: bool mmap
     Use memory mapping.  This is the default.

     Setting this variable to false or unsetting it results in passing
     'GDBM_NOMMAP' flag to 'gdbm_open' (*note GDBM_NOMMAP: Open.).

 -- gdbmtool variable: bool sync
     Flush all database writes on disk immediately.  Default is false.
     *Note GDBM_SYNC: Open.

 -- gdbmtool variable: bool coalesce
     Enables the _coalesce_ mode, i.e.  merging of the freed blocks of
     GDBM files with entries in available block lists.  This provides
     for effective memory management at the cost of slight increase in
     execution time when calling 'gdbm_delete'.  *Note
     GDBM_SETCOALESCEBLKS: Options.

     This variable affects the 'open' command and should be set before
     invoking it.

 -- gdbmtool variable: bool centfree
     Set to 'true', enables the use of central free block pool in newly
     opened databases.  *Note GDBM_SETCENTFREE: Options.

     This variable affects the 'open' command and should be set before
     invoking it.

   The following commands are used to list or modify the variables:

 -- command verb: set [ASSIGNMENTS]
     When used without arguments, lists all variables and their values.
     Unset variables are shown after a comment sign ('#').  For string
     and numeric variables, values are shown after an equals sign.  For
     boolean variables, only the variable name is displayed if the
     variable is 'true'.  If it is 'false', its name is prefixed with
     'no'.

     For example:

          ps1="%p>%_"
          ps2="%_>%_"
          delim1=","
          delim2=","
          confirm
          # cachesize is unset
          # blocksize is unset
          open="wrcreat"
          lock
          mmap
          nosync
          pager="less"
          # quiet is unset

     If used with arguments, the 'set' command alters the specified
     variables.  In this case, arguments are variable assignments in the
     form 'NAME=VALUE'.  For boolean variables, the VALUE is interpreted
     as follows: if it is numeric, '0' stands for 'false', any non-zero
     value stands for 'true'.  Otherwise, the values 'on', 'true', and
     'yes' denote 'true', and 'off', 'false', 'no' stand for 'false'.
     Alternatively, only the name of a boolean variable can be supplied
     to set it to 'true', and its name prefixed with 'no' can be used to
     set it to false.  For example, the following command sets the
     'delim2' variable to ';' and the 'confirm' variable to 'false':

          set delim2=";" noconfirm

 -- command verb: unset VARIABLES
     Unsets the listed variables.  The effect of unsetting depends on
     the variable.  Unless explicitly described in the discussion of the
     variables above, unsetting a boolean variable is equivalent to
     setting it to 'false'.  Unsetting a string variable is equivalent
     to assigning it an empty string.


File: gdbm.info,  Node: commands,  Next: definitions,  Prev: variables,  Up: shell

21.2.2 Gdbmtool Commands
------------------------

 -- command verb: avail
     Print the "avail list".

 -- command verb: bucket NUM
     Print the bucket number NUM and set it as the current one.

 -- command verb: cache
     Print the bucket cache.

 -- command verb: close
     Close the currently open database.

 -- command verb: count
     Print the number of entries in the database.

 -- command verb: current
     Print the current bucket.

 -- command verb: debug [[+-]TOKEN...]
     If 'GDBM' is configured with additional debugging, this statement
     queries or sets 'GDBM' internal debugging level.  This is intended
     for debugging and testing purposes and requires good knowledge of
     'GDBM' internals.  The use of this command is not recommended.

 -- command verb: delete KEY
     Delete record with the given KEY

 -- command verb: dir
     Print hash directory.

 -- command verb: export FILE-NAME [truncate] [binary|ascii]
     Export the database to the flat file FILE-NAME.  *Note Flat
     files::, for a description of the flat file format and its
     purposes.  This command will not overwrite an existing file, unless
     the 'truncate' parameter is also given.  Another optional argument
     determines the type of the dump (*note Flat files::).  By default,
     ASCII dump is created.

     The global variable 'filemode' specifies the permissions to use for
     the created output file.

 -- command verb: fetch KEY
     Fetch and display the record with the given KEY.

 -- command verb: first
     Fetch and display the first record in the database.  Subsequent
     records can be fetched using the 'next' command (see below).  *Note
     Sequential::, for more information on sequential access.

 -- command verb: hash KEY
     Compute and display the hash value for the given KEY.

 -- command verb: header
     Print file header.

 -- command verb: help
 -- command verb: ?
     Print a concise command summary, showing each command verb with its
     parameters and a short description of what it does.  Optional
     arguments are enclosed in square brackets.

 -- command verb: import FILE-NAME [replace] [nometa]
     Import data from a flat dump file FILE-NAME (*note Flat files::).
     If the word 'replace' is given as an argument, any records with the
     same keys as the already existing ones will replace them.  The word
     'nometa' turns off restoring meta-information from the dump file.

 -- command verb: history
 -- command verb: history COUNT
 -- command verb: history N COUNT
     Shows the command history list with line numbers.  When used
     without arguments, shows entire history.  When used with one
     argument, displays COUNT last commands from the history.  With two
     arguments, displays COUNT commands starting from Nth command.
     Command numbering starts with 1.

     This command is available only if GDBM was compiled with GNU
     Readline.  The history is saved in file '.gdbmtool_history' in the
     user's home directory.  If this file exists upon startup, it is
     read to populate the history.  Thus, command history is preserved
     between 'gdbmtool' invocations.

 -- command verb: list
     List the contents of the database.

 -- command verb: next [KEY]
     Sequential access: fetch and display the next record.  If the KEY
     is given, the record following the one with this key will be
     fetched.

     Issuing several 'next' commands in row is rather common.  A
     shortcut is provided to facilitate such use: if the last entered
     command was 'next', hitting the 'Enter' key repeats it without
     arguments.

     See also 'first', above.

     *Note Sequential::, for more information on sequential access.

 -- command verb: open FILENAME
     Open the database file FILENAME.  If successful, any previously
     open database is closed.  Otherwise, if the operation fails, the
     currently opened database remains unchanged.

     This command takes additional information from the following
     variables:

     'open'
          The database access mode.  *Note The OPEN variable: openvar,
          for a list of its values.
     'lock'
          Whether or not to lock the database.  Default is 'on'.
     'mmap'
          Use the memory mapping.  Default is 'on'.
     'sync'
          Synchronize after each write.  Default is 'off'.
     'filemode'
          Specifies the permissions to use in case a new file is
          created.

     *Note open parameters::, for a detailed description of these
     variables.

 -- command verb: quit
     Close the database and quit the utility.

 -- command verb: recover [OPTIONS]
     Run database recovery.  The following OPTIONS are understood:

     'backup'
          Create a backup copy of the original database.

     'max-failed-buckets=N'
          Abort recovery process if N buckets could not be recovered.

     'max-failed-keys=N'
          Abort recovery process if N keys could not be recovered.

     'max-failures=N'
          Abort recovery process after N failures.  A "failure" in this
          context is either a key or a bucket that failed to be
          recovered.

     'summary'
          Print the recovery statistics at the end of the run.  The
          statistics includes number of successfully recovered, failed
          and duplicate keys and the number of recovered and failed
          buckets.

     'verbose'
          Verbosely list each error encountered.

 -- command verb: reorganize
     Reorganize the database (*note Reorganization::).

 -- command verb: source FILENAME
     Read 'gdbmtool' commands from the file FILENAME.

 -- command verb: status
     Print current program status.  The following example shows the
     information displayed:

          Database file: junk.gdbm
          Database is open
          define key string
          define content string

     The two 'define' strings show the defined formats for key and
     content data.  *Note definitions::, for a detailed discussion of
     their meaning.

 -- command verb: store KEY DATA
     Store the DATA with KEY in the database.  If KEY already exists,
     its data will be replaced.

 -- command verb: version
     Print the version of 'gdbm'.


File: gdbm.info,  Node: definitions,  Next: startup files,  Prev: commands,  Up: shell

21.2.3 Data Definitions
-----------------------

GDBM databases are able to keep data of any type, both in the key and in
the content part of a record.  Quite often these data are structured,
i.e.  they consist of several fields of various types.  'Gdbmtool'
provides a mechanism for handling such kind of records.

   The 'define' command defines a record structure.  The general syntax
is:

     define WHAT DEFINITION

where WHAT is 'key' to defining the structure of key data and 'content'
to define the structure of the content records.

   The DEFINITION can be of two distinct formats.  In the simplest case
it is a single data type.  For example,

     define content int

defines content records consisting of a single integer field.  Supported
data types are:

char
     Single byte (signed).
short
     Signed short integer.
ushort
     Unsigned short integer.
int
     Signed integer.
unsigned
uint
     Unsigned integer.
long
     Signed long integer.
ulong
     Unsigned long integer.
llong
     Signed long long integer.
ullong
     Unsigned long long integer.
float
     A floating point number.
double
     Double-precision floating point number.
string
     Array of bytes.
stringz
     Null-terminated string, trailing null being part of the string.

   All numeric data types (integer as well as floating point) have the
same respective widths as in C language on the host where the database
file resides.

   The 'string' and 'stringz' are special.  Both define a string of
bytes, similar to 'char x[]' in C. The former defines an array of bytes,
the latter - a null-terminated string.  This makes a difference, in
particular, when the string is the only part of datum.  Consider the
following two definitions:

  1. 'define key string'
  2. 'define key stringz'

Now, suppose we want to store the string "ab" in the key.  Using the
definition (1), the 'dptr' member of GDBM 'datum' will contain two
bytes: 'a', and 'b'.  Consequently, the 'dsize' member will have the
value 2.  Using the definition (2), the 'dptr' member will contain three
bytes: 'a', 'b', and ASCII 0.  The 'dsize' member will have the value 3.

   The definition (1) is the default for both key and content.

   The second form of the 'define' statement is similar to the C
'struct' statement and allows for defining structural data.  In this
form, the DEFINITION part is a comma-separated list of data types and
variables enclosed in curly braces.  In contrast to the rest of 'gdbm'
commands, this command is inherently multiline and is terminated with
the closing curly brace.  For example:

     define content {
             int status,
             pad 8,
             char id[3],
             string name
     }

This defines a structure consisting of three members: an integer
'status', an array of 8 bytes 'id', and a null-terminated string 'name'.
Notice the 'pad' statement: it allows to introduce padding between
structure members.  Another useful statement is 'offset': it specifies
that the member following it begins at the given offset in the
structure.  Assuming the size of 'int' is 8 bytes, the above definition
can also be written as

     define content {
             int status,
             offset 16,
             char id[3],
             string name
     }

   _NOTE_: The 'string' type can reasonably be used only if it is the
last or the only member of the data structure.  That's because it
provides no information about the number of elements in the array, so it
is interpreted to contain all bytes up to the end of the datum.

   When displaying the structured data, 'gdbmtool' precedes each value
with the corresponding field name and delimits parts of the structure
with the string defined in the 'delim1' variable (*note variables::).
Array elements are delimited using the string from 'delim2'.  For
example:

     gdbmtool> fetch foo
     status=2,id={ a, u, x },name="quux"

   To supply a structured datum as an argument to a 'gdbmtool' command,
use the same notation, but without field names, e.g.:

     gdbmtool> hash { 2, {a,u,x}, "quux" }
     hash value = 13089969.


File: gdbm.info,  Node: startup files,  Prev: definitions,  Up: shell

21.2.4 Startup Files
--------------------

Upon startup 'gdbmtool' looks for a file named '.gdbmtoolrc' first in
the current working directory and, if not found, in the home directory
of the user who started the command.

   If found, this file is read and interpreted as a list of 'gdbmtool'
commands.  This allows you to customize the program behavior.

   Following is an example startup file which disables the welcome
banner, sets command line prompt to contain the name of the database
file in parentheses and defines the structure of the database content
records:

     set quiet
     set ps1="(%f) "
     define key stringz
     define content {
             int time,
             pad 4,
             int status
     }


File: gdbm.info,  Node: gdbm_dump,  Next: gdbm_load,  Prev: gdbmtool,  Up: Top

22 The 'gdbm_dump' utility
**************************

The 'gdbm_dump' utility creates a flat file dump of a GDBM database
(*note Flat files::).  It takes one mandatory argument: the name of the
source database file.  The second argument, if given, specifies the name
of the output file.  If not given, 'gdbm_dump' will produce the dump on
the standard output.

   For example, the following invocation creates a dump of the database
'file.db' in the file 'file.dump':

     $ gdbm_dump file.db file.dump

   By default the utility creates dumps in ASCII format (*note ASCII:
Flat files.).  Another format can be requested using the '--format'
('-H') option.

   The 'gdbm_dump' utility understands the following command line
options:

'-H FMT'
'--format=FMT'
     Select output format.  Valid values for FMT are: 'binary' or '0' to
     select binary dump format, and 'ascii' or '1' to select ASCII
     format.

'-h'
'--help'
     Print a concise help summary.

'-V'
'--version'
     Print program version and licensing information and exit.

'--usage'
     Print a terse invocation syntax summary along with a list of
     available command line options.


File: gdbm.info,  Node: gdbm_load,  Next: Exit codes,  Prev: gdbm_dump,  Up: Top

23 The 'gdbm_load' utility
**************************

The 'gdbm_load' utility restores a GDBM database from a flat file.  The
utility requires at least one argument: the name of the input flat file.
If it is '-', the standard input will be read.  The format of the input
file is detected automatically.

   By default the utility attempts to restore the database under its
original name, as stored in the input file.  It will fail to do so if
the input is in binary format.  In that case, the name of the database
must be given as the second argument.

   In general, if two arguments are given the second one is treated as
the name of the database to create, overriding the file name specified
in the flat file.

   The utility understands the following command line arguments:

'-b NUM'
'--block-size=NUM'
     Sets block size.  *Note block_size: Open.

'-c NUM'
'--cache-size=NUM'
     Sets cache size.  *Note GDBM_SETCACHESIZE: Options.

'-M'
'--mmap'
     Use memory mapping.

'-m MODE'
'--mode=MODE'
     Sets the file mode.  The argument is the desired file mode in
     octal.

'-n'
'--no-meta'
     Do not restore file meta-data (ownership and mode) from the flat
     file.

'-r'
'--replace'
     Replace existing keys.

'-u USER[:GROUP]'
'--user=USER[:GROUP]'
     Set file owner.  The USER can be either a valid user name or UID.
     Similarly, the GROUP is either a valid group name or GID. If GROUP
     is not given, the main group of USER is used.

     User and group parts can be separated by a dot, instead of the
     colon.

'-h'
'--help'
     Print a concise help summary.

'-V'
'--version'
     Print program version and licensing information and exit.

'--usage'
     Print a terse invocation syntax summary along with a list of
     available command line options.


File: gdbm.info,  Node: Exit codes,  Next: Bugs,  Prev: gdbm_load,  Up: Top

24 Exit codes
*************

All GDBM utilities return uniform exit codes.  These are summarized in
the table below:

Code                   Meaning
--------------------------------------------------------------------------
0                      Successful termination.
1                      A fatal error occurred.
2                      Program was unable to restore file ownership or
                       mode.
3                      Command line usage error.


File: gdbm.info,  Node: Bugs,  Next: Resources,  Prev: Exit codes,  Up: Top

25 Problems and bugs.
*********************

If you have problems with GNU 'dbm' or think you've found a bug, please
report it.  Before reporting a bug, make sure you've actually found a
real bug.  Carefully reread the documentation and see if it really says
you can do what you're trying to do.  If it's not clear whether you
should be able to do something or not, report that too; it's a bug in
the documentation!

   Before reporting a bug or trying to fix it yourself, try to isolate
it to the smallest possible input file that reproduces the problem.
Then send us the input file and the exact results 'gdbm' gave you.  Also
say what you expected to occur; this will help us decide whether the
problem was really in the documentation.

   Once you've got a precise problem, send e-mail to <[email protected]>.

   Please include the version number of GNU 'dbm' you are using.  You
can get this information by printing the variable 'gdbm_version' (*note
Variables::).

   Non-bug suggestions are always welcome as well.  If you have
questions about things that are unclear in the documentation or are just
obscure features, please report them too.

   You may contact the authors and maintainers by e-mail:
     <phil@cs.wwu.edu>, <[email protected]>, <[email protected]>


File: gdbm.info,  Node: Resources,  Next: GNU Free Documentation License,  Prev: Bugs,  Up: Top

26 Additional resources
***********************

For the latest updates and pointers to additional resources, visit
<http://www.gnu.org/software/gdbm>.

   In particular, a copy of 'gdbm' documentation in various formats is
available online at <http://www.gnu.org/software/gdbm/manual.html>.

   Latest versions of 'gdbm' can be downloaded from anonymous FTP:
<ftp://ftp.gnu.org/gnu/gdbm>, or via HTTP from
<http://ftp.gnu.org/gnu/gdbm>, or from any GNU mirror worldwide.  See
<http://www.gnu.org/order/ftp.html>, for a list of mirrors.

   To track 'gdbm' development, visit
<http://puszcza.gnu.org.ua/projects/gdbm>.


File: gdbm.info,  Node: GNU Free Documentation License,  Next: Index,  Prev: Resources,  Up: Top

Appendix A GNU Free Documentation License
*****************************************

                     Version 1.3, 3 November 2008

     Copyright (C) 2000-2002, 2007-2008, 2011, 2017-2018 Free
     Software Foundation, Inc.
     <http://fsf.org/>

     Everyone is permitted to copy and distribute verbatim copies
     of this license document, but changing it is not allowed.

  0. PREAMBLE

     The purpose of this License is to make a manual, textbook, or other
     functional and useful document "free" in the sense of freedom: to
     assure everyone the effective freedom to copy and redistribute it,
     with or without modifying it, either commercially or
     noncommercially.  Secondarily, this License preserves for the
     author and publisher a way to get credit for their work, while not
     being considered responsible for modifications made by others.

     This License is a kind of "copyleft", which means that derivative
     works of the document must themselves be free in the same sense.
     It complements the GNU General Public License, which is a copyleft
     license designed for free software.

     We have designed this License in order to use it for manuals for
     free software, because free software needs free documentation: a
     free program should come with manuals providing the same freedoms
     that the software does.  But this License is not limited to
     software manuals; it can be used for any textual work, regardless
     of subject matter or whether it is published as a printed book.  We
     recommend this License principally for works whose purpose is
     instruction or reference.

  1. APPLICABILITY AND DEFINITIONS

     This License applies to any manual or other work, in any medium,
     that contains a notice placed by the copyright holder saying it can
     be distributed under the terms of this License.  Such a notice
     grants a world-wide, royalty-free license, unlimited in duration,
     to use that work under the conditions stated herein.  The
     "Document", below, refers to any such manual or work.  Any member
     of the public is a licensee, and is addressed as "you".  You accept
     the license if you copy, modify or distribute the work in a way
     requiring permission under copyright law.

     A "Modified Version" of the Document means any work containing the
     Document or a portion of it, either copied verbatim, or with
     modifications and/or translated into another language.

     A "Secondary Section" is a named appendix or a front-matter section
     of the Document that deals exclusively with the relationship of the
     publishers or authors of the Document to the Document's overall
     subject (or to related matters) and contains nothing that could
     fall directly within that overall subject.  (Thus, if the Document
     is in part a textbook of mathematics, a Secondary Section may not
     explain any mathematics.)  The relationship could be a matter of
     historical connection with the subject or with related matters, or
     of legal, commercial, philosophical, ethical or political position
     regarding them.

     The "Invariant Sections" are certain Secondary Sections whose
     titles are designated, as being those of Invariant Sections, in the
     notice that says that the Document is released under this License.
     If a section does not fit the above definition of Secondary then it
     is not allowed to be designated as Invariant.  The Document may
     contain zero Invariant Sections.  If the Document does not identify
     any Invariant Sections then there are none.

     The "Cover Texts" are certain short passages of text that are
     listed, as Front-Cover Texts or Back-Cover Texts, in the notice
     that says that the Document is released under this License.  A
     Front-Cover Text may be at most 5 words, and a Back-Cover Text may
     be at most 25 words.

     A "Transparent" copy of the Document means a machine-readable copy,
     represented in a format whose specification is available to the
     general public, that is suitable for revising the document
     straightforwardly with generic text editors or (for images composed
     of pixels) generic paint programs or (for drawings) some widely
     available drawing editor, and that is suitable for input to text
     formatters or for automatic translation to a variety of formats
     suitable for input to text formatters.  A copy made in an otherwise
     Transparent file format whose markup, or absence of markup, has
     been arranged to thwart or discourage subsequent modification by
     readers is not Transparent.  An image format is not Transparent if
     used for any substantial amount of text.  A copy that is not
     "Transparent" is called "Opaque".

     Examples of suitable formats for Transparent copies include plain
     ASCII without markup, Texinfo input format, LaTeX input format,
     SGML or XML using a publicly available DTD, and standard-conforming
     simple HTML, PostScript or PDF designed for human modification.
     Examples of transparent image formats include PNG, XCF and JPG.
     Opaque formats include proprietary formats that can be read and
     edited only by proprietary word processors, SGML or XML for which
     the DTD and/or processing tools are not generally available, and
     the machine-generated HTML, PostScript or PDF produced by some word
     processors for output purposes only.

     The "Title Page" means, for a printed book, the title page itself,
     plus such following pages as are needed to hold, legibly, the
     material this License requires to appear in the title page.  For
     works in formats which do not have any title page as such, "Title
     Page" means the text near the most prominent appearance of the
     work's title, preceding the beginning of the body of the text.

     The "publisher" means any person or entity that distributes copies
     of the Document to the public.

     A section "Entitled XYZ" means a named subunit of the Document
     whose title either is precisely XYZ or contains XYZ in parentheses
     following text that translates XYZ in another language.  (Here XYZ
     stands for a specific section name mentioned below, such as
     "Acknowledgements", "Dedications", "Endorsements", or "History".)
     To "Preserve the Title" of such a section when you modify the
     Document means that it remains a section "Entitled XYZ" according
     to this definition.

     The Document may include Warranty Disclaimers next to the notice
     which states that this License applies to the Document.  These
     Warranty Disclaimers are considered to be included by reference in
     this License, but only as regards disclaiming warranties: any other
     implication that these Warranty Disclaimers may have is void and
     has no effect on the meaning of this License.

  2. VERBATIM COPYING

     You may copy and distribute the Document in any medium, either
     commercially or noncommercially, provided that this License, the
     copyright notices, and the license notice saying this License
     applies to the Document are reproduced in all copies, and that you
     add no other conditions whatsoever to those of this License.  You
     may not use technical measures to obstruct or control the reading
     or further copying of the copies you make or distribute.  However,
     you may accept compensation in exchange for copies.  If you
     distribute a large enough number of copies you must also follow the
     conditions in section 3.

     You may also lend copies, under the same conditions stated above,
     and you may publicly display copies.

  3. COPYING IN QUANTITY

     If you publish printed copies (or copies in media that commonly
     have printed covers) of the Document, numbering more than 100, and
     the Document's license notice requires Cover Texts, you must
     enclose the copies in covers that carry, clearly and legibly, all
     these Cover Texts: Front-Cover Texts on the front cover, and
     Back-Cover Texts on the back cover.  Both covers must also clearly
     and legibly identify you as the publisher of these copies.  The
     front cover must present the full title with all words of the title
     equally prominent and visible.  You may add other material on the
     covers in addition.  Copying with changes limited to the covers, as
     long as they preserve the title of the Document and satisfy these
     conditions, can be treated as verbatim copying in other respects.

     If the required texts for either cover are too voluminous to fit
     legibly, you should put the first ones listed (as many as fit
     reasonably) on the actual cover, and continue the rest onto
     adjacent pages.

     If you publish or distribute Opaque copies of the Document
     numbering more than 100, you must either include a machine-readable
     Transparent copy along with each Opaque copy, or state in or with
     each Opaque copy a computer-network location from which the general
     network-using public has access to download using public-standard
     network protocols a complete Transparent copy of the Document, free
     of added material.  If you use the latter option, you must take
     reasonably prudent steps, when you begin distribution of Opaque
     copies in quantity, to ensure that this Transparent copy will
     remain thus accessible at the stated location until at least one
     year after the last time you distribute an Opaque copy (directly or
     through your agents or retailers) of that edition to the public.

     It is requested, but not required, that you contact the authors of
     the Document well before redistributing any large number of copies,
     to give them a chance to provide you with an updated version of the
     Document.

  4. MODIFICATIONS

     You may copy and distribute a Modified Version of the Document
     under the conditions of sections 2 and 3 above, provided that you
     release the Modified Version under precisely this License, with the
     Modified Version filling the role of the Document, thus licensing
     distribution and modification of the Modified Version to whoever
     possesses a copy of it.  In addition, you must do these things in
     the Modified Version:

       A. Use in the Title Page (and on the covers, if any) a title
          distinct from that of the Document, and from those of previous
          versions (which should, if there were any, be listed in the
          History section of the Document).  You may use the same title
          as a previous version if the original publisher of that
          version gives permission.

       B. List on the Title Page, as authors, one or more persons or
          entities responsible for authorship of the modifications in
          the Modified Version, together with at least five of the
          principal authors of the Document (all of its principal
          authors, if it has fewer than five), unless they release you
          from this requirement.

       C. State on the Title page the name of the publisher of the
          Modified Version, as the publisher.

       D. Preserve all the copyright notices of the Document.

       E. Add an appropriate copyright notice for your modifications
          adjacent to the other copyright notices.

       F. Include, immediately after the copyright notices, a license
          notice giving the public permission to use the Modified
          Version under the terms of this License, in the form shown in
          the Addendum below.

       G. Preserve in that license notice the full lists of Invariant
          Sections and required Cover Texts given in the Document's
          license notice.

       H. Include an unaltered copy of this License.

       I. Preserve the section Entitled "History", Preserve its Title,
          and add to it an item stating at least the title, year, new
          authors, and publisher of the Modified Version as given on the
          Title Page.  If there is no section Entitled "History" in the
          Document, create one stating the title, year, authors, and
          publisher of the Document as given on its Title Page, then add
          an item describing the Modified Version as stated in the
          previous sentence.

       J. Preserve the network location, if any, given in the Document
          for public access to a Transparent copy of the Document, and
          likewise the network locations given in the Document for
          previous versions it was based on.  These may be placed in the
          "History" section.  You may omit a network location for a work
          that was published at least four years before the Document
          itself, or if the original publisher of the version it refers
          to gives permission.

       K. For any section Entitled "Acknowledgements" or "Dedications",
          Preserve the Title of the section, and preserve in the section
          all the substance and tone of each of the contributor
          acknowledgements and/or dedications given therein.

       L. Preserve all the Invariant Sections of the Document, unaltered
          in their text and in their titles.  Section numbers or the
          equivalent are not considered part of the section titles.

       M. Delete any section Entitled "Endorsements".  Such a section
          may not be included in the Modified Version.

       N. Do not retitle any existing section to be Entitled
          "Endorsements" or to conflict in title with any Invariant
          Section.

       O. Preserve any Warranty Disclaimers.

     If the Modified Version includes new front-matter sections or
     appendices that qualify as Secondary Sections and contain no
     material copied from the Document, you may at your option designate
     some or all of these sections as invariant.  To do this, add their
     titles to the list of Invariant Sections in the Modified Version's
     license notice.  These titles must be distinct from any other
     section titles.

     You may add a section Entitled "Endorsements", provided it contains
     nothing but endorsements of your Modified Version by various
     parties--for example, statements of peer review or that the text
     has been approved by an organization as the authoritative
     definition of a standard.

     You may add a passage of up to five words as a Front-Cover Text,
     and a passage of up to 25 words as a Back-Cover Text, to the end of
     the list of Cover Texts in the Modified Version.  Only one passage
     of Front-Cover Text and one of Back-Cover Text may be added by (or
     through arrangements made by) any one entity.  If the Document
     already includes a cover text for the same cover, previously added
     by you or by arrangement made by the same entity you are acting on
     behalf of, you may not add another; but you may replace the old
     one, on explicit permission from the previous publisher that added
     the old one.

     The author(s) and publisher(s) of the Document do not by this
     License give permission to use their names for publicity for or to
     assert or imply endorsement of any Modified Version.

  5. COMBINING DOCUMENTS

     You may combine the Document with other documents released under
     this License, under the terms defined in section 4 above for
     modified versions, provided that you include in the combination all
     of the Invariant Sections of all of the original documents,
     unmodified, and list them all as Invariant Sections of your
     combined work in its license notice, and that you preserve all
     their Warranty Disclaimers.

     The combined work need only contain one copy of this License, and
     multiple identical Invariant Sections may be replaced with a single
     copy.  If there are multiple Invariant Sections with the same name
     but different contents, make the title of each such section unique
     by adding at the end of it, in parentheses, the name of the
     original author or publisher of that section if known, or else a
     unique number.  Make the same adjustment to the section titles in
     the list of Invariant Sections in the license notice of the
     combined work.

     In the combination, you must combine any sections Entitled
     "History" in the various original documents, forming one section
     Entitled "History"; likewise combine any sections Entitled
     "Acknowledgements", and any sections Entitled "Dedications".  You
     must delete all sections Entitled "Endorsements."

  6. COLLECTIONS OF DOCUMENTS

     You may make a collection consisting of the Document and other
     documents released under this License, and replace the individual
     copies of this License in the various documents with a single copy
     that is included in the collection, provided that you follow the
     rules of this License for verbatim copying of each of the documents
     in all other respects.

     You may extract a single document from such a collection, and
     distribute it individually under this License, provided you insert
     a copy of this License into the extracted document, and follow this
     License in all other respects regarding verbatim copying of that
     document.

  7. AGGREGATION WITH INDEPENDENT WORKS

     A compilation of the Document or its derivatives with other
     separate and independent documents or works, in or on a volume of a
     storage or distribution medium, is called an "aggregate" if the
     copyright resulting from the compilation is not used to limit the
     legal rights of the compilation's users beyond what the individual
     works permit.  When the Document is included in an aggregate, this
     License does not apply to the other works in the aggregate which
     are not themselves derivative works of the Document.

     If the Cover Text requirement of section 3 is applicable to these
     copies of the Document, then if the Document is less than one half
     of the entire aggregate, the Document's Cover Texts may be placed
     on covers that bracket the Document within the aggregate, or the
     electronic equivalent of covers if the Document is in electronic
     form.  Otherwise they must appear on printed covers that bracket
     the whole aggregate.

  8. TRANSLATION

     Translation is considered a kind of modification, so you may
     distribute translations of the Document under the terms of section
     4.  Replacing Invariant Sections with translations requires special
     permission from their copyright holders, but you may include
     translations of some or all Invariant Sections in addition to the
     original versions of these Invariant Sections.  You may include a
     translation of this License, and all the license notices in the
     Document, and any Warranty Disclaimers, provided that you also
     include the original English version of this License and the
     original versions of those notices and disclaimers.  In case of a
     disagreement between the translation and the original version of
     this License or a notice or disclaimer, the original version will
     prevail.

     If a section in the Document is Entitled "Acknowledgements",
     "Dedications", or "History", the requirement (section 4) to
     Preserve its Title (section 1) will typically require changing the
     actual title.

  9. TERMINATION

     You may not copy, modify, sublicense, or distribute the Document
     except as expressly provided under this License.  Any attempt
     otherwise to copy, modify, sublicense, or distribute it is void,
     and will automatically terminate your rights under this License.

     However, if you cease all violation of this License, then your
     license from a particular copyright holder is reinstated (a)
     provisionally, unless and until the copyright holder explicitly and
     finally terminates your license, and (b) permanently, if the
     copyright holder fails to notify you of the violation by some
     reasonable means prior to 60 days after the cessation.

     Moreover, your license from a particular copyright holder is
     reinstated permanently if the copyright holder notifies you of the
     violation by some reasonable means, this is the first time you have
     received notice of violation of this License (for any work) from
     that copyright holder, and you cure the violation prior to 30 days
     after your receipt of the notice.

     Termination of your rights under this section does not terminate
     the licenses of parties who have received copies or rights from you
     under this License.  If your rights have been terminated and not
     permanently reinstated, receipt of a copy of some or all of the
     same material does not give you any rights to use it.

  10. FUTURE REVISIONS OF THIS LICENSE

     The Free Software Foundation may publish new, revised versions of
     the GNU Free Documentation License from time to time.  Such new
     versions will be similar in spirit to the present version, but may
     differ in detail to address new problems or concerns.  See
     <http://www.gnu.org/copyleft/>.

     Each version of the License is given a distinguishing version
     number.  If the Document specifies that a particular numbered
     version of this License "or any later version" applies to it, you
     have the option of following the terms and conditions either of
     that specified version or of any later version that has been
     published (not as a draft) by the Free Software Foundation.  If the
     Document does not specify a version number of this License, you may
     choose any version ever published (not as a draft) by the Free
     Software Foundation.  If the Document specifies that a proxy can
     decide which future versions of this License can be used, that
     proxy's public statement of acceptance of a version permanently
     authorizes you to choose that version for the Document.

  11. RELICENSING

     "Massive Multiauthor Collaboration Site" (or "MMC Site") means any
     World Wide Web server that publishes copyrightable works and also
     provides prominent facilities for anybody to edit those works.  A
     public wiki that anybody can edit is an example of such a server.
     A "Massive Multiauthor Collaboration" (or "MMC") contained in the
     site means any set of copyrightable works thus published on the MMC
     site.

     "CC-BY-SA" means the Creative Commons Attribution-Share Alike 3.0
     license published by Creative Commons Corporation, a not-for-profit
     corporation with a principal place of business in San Francisco,
     California, as well as future copyleft versions of that license
     published by that same organization.

     "Incorporate" means to publish or republish a Document, in whole or
     in part, as part of another Document.

     An MMC is "eligible for relicensing" if it is licensed under this
     License, and if all works that were first published under this
     License somewhere other than this MMC, and subsequently
     incorporated in whole or in part into the MMC, (1) had no cover
     texts or invariant sections, and (2) were thus incorporated prior
     to November 1, 2008.

     The operator of an MMC Site may republish an MMC contained in the
     site under CC-BY-SA on the same site at any time before August 1,
     2009, provided the MMC is eligible for relicensing.

ADDENDUM: How to use this License for your documents
====================================================

To use this License in a document you have written, include a copy of
the License in the document and put the following copyright and license
notices just after the title page:

       Copyright (C)  YEAR  YOUR NAME.
       Permission is granted to copy, distribute and/or modify this document
       under the terms of the GNU Free Documentation License, Version 1.3
       or any later version published by the Free Software Foundation;
       with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
       Texts.  A copy of the license is included in the section entitled ``GNU
       Free Documentation License''.

   If you have Invariant Sections, Front-Cover Texts and Back-Cover
Texts, replace the "with...Texts."  line with this:

         with the Invariant Sections being LIST THEIR TITLES, with
         the Front-Cover Texts being LIST, and with the Back-Cover Texts
         being LIST.

   If you have Invariant Sections without Cover Texts, or some other
combination of the three, merge those two alternatives to suit the
situation.

   If your document contains nontrivial examples of program code, we
recommend releasing these examples in parallel under your choice of free
software license, such as the GNU General Public License, to permit
their use in free software.


File: gdbm.info,  Node: Index,  Prev: GNU Free Documentation License,  Up: Top

Index
*****

[index]
* Menu:

* (*errfun) on gdbm_recovery:            Recovery.            (line  52)
* '--newdb', 'gdbmtool' option:          gdbmtool.            (line  20)
* '--read-only', 'gdbmtool' option:      gdbmtool.            (line  16)
* '-n', 'gdbmtool' option:               gdbmtool.            (line  20)
* '-r', 'gdbmtool' option:               gdbmtool.            (line  16)
* .gdbmtoolrc:                           startup files.       (line   6)
* ?:                                     commands.            (line  62)
* _GDBM_MAX_ERRNO:                       Variables.           (line  31)
* _GDBM_MIN_ERRNO:                       Variables.           (line  28)
* avail:                                 commands.            (line   6)
* backup_name of gdbm_recovery:          Recovery.            (line  95)
* blocksize:                             variables.           (line  66)
* bucket:                                commands.            (line   9)
* cache:                                 commands.            (line  12)
* cachesize:                             variables.           (line  69)
* centfree:                              variables.           (line 129)
* close:                                 commands.            (line  15)
* close-on-exec:                         Open.                (line  57)
* closing database:                      Close.               (line   6)
* coalesce:                              variables.           (line 119)
* command line options, 'gdbmtool':      invocation.          (line   6)
* compatibility layer:                   Compatibility.       (line   6)
* confirm:                               variables.           (line   8)
* count:                                 commands.            (line  18)
* creating a database, 'gdbmtool':       gdbmtool.            (line  20)
* current:                               commands.            (line  21)
* data of gdbm_recovery:                 Recovery.            (line  58)
* database options:                      Options.             (line   6)
* database reorganization:               Reorganization.      (line   6)
* database synchronization:              Sync.                (line   6)
* database, closing:                     Close.               (line   6)
* database, opening or creating:         Open.                (line   6)
* DBM functions:                         dbm.                 (line   6)
* dbm.h:                                 Compatibility.       (line  10)
* dbmclose:                              dbm.                 (line  22)
* dbminit:                               dbm.                 (line  10)
* dbm_clearerr:                          ndbm.                (line  97)
* dbm_close:                             ndbm.                (line  25)
* dbm_delete:                            ndbm.                (line  56)
* dbm_dirfno:                            ndbm.                (line 100)
* dbm_error:                             ndbm.                (line  92)
* dbm_fetch:                             ndbm.                (line  29)
* dbm_firstkey:                          ndbm.                (line  61)
* DBM_INSERT:                            ndbm.                (line  49)
* dbm_nextkey:                           ndbm.                (line  71)
* dbm_open:                              ndbm.                (line   8)
* dbm_pagfno:                            ndbm.                (line 108)
* dbm_rdonly:                            ndbm.                (line 112)
* DBM_REPLACE:                           ndbm.                (line  46)
* dbm_store:                             ndbm.                (line  38)
* debug:                                 commands.            (line  24)
* default database, 'gdbmtool':          gdbmtool.            (line   9)
* delete:                                dbm.                 (line  41)
* delete <1>:                            commands.            (line  30)
* deleting records:                      Delete.              (line   6)
* deletion in iteration loops:           Sequential.          (line  60)
* delim1:                                variables.           (line  39)
* delim2:                                variables.           (line  45)
* dir:                                   commands.            (line  33)
* 'dir' file:                            Compatibility.       (line  21)
* error code, most recent:               Errors.              (line  21)
* error codes:                           Error codes.         (line   6)
* error strings:                         Errors.              (line   6)
* exit code:                             Exit codes.          (line   6)
* export:                                Flat files.          (line   6)
* export <1>:                            commands.            (line  36)
* failed_buckets of gdbm_recovery:       Recovery.            (line  92)
* failed_keys of gdbm_recovery:          Recovery.            (line  89)
* fetch:                                 dbm.                 (line  25)
* fetch <1>:                             commands.            (line  47)
* fetching records:                      Fetch.               (line   6)
* filemode:                              variables.           (line  99)
* first:                                 commands.            (line  50)
* firstkey:                              dbm.                 (line  47)
* Flat file format:                      Flat files.          (line   6)
* gdbmtool:                              gdbmtool.            (line   6)
* GDBM_BACKUP_FAILED:                    Error codes.         (line 165)
* GDBM_BAD_FILE_OFFSET:                  Error codes.         (line 114)
* GDBM_BAD_MAGIC_NUMBER:                 Error codes.         (line  49)
* GDBM_BAD_OPEN_FLAGS:                   Error codes.         (line 118)
* GDBM_BLOCK_SIZE_ERROR:                 Error codes.         (line  15)
* GDBM_BSEXACT:                          Open.                (line  52)
* GDBM_BSEXACT <1>:                      Error codes.         (line  15)
* GDBM_BYTE_SWAPPED:                     Error codes.         (line 110)
* GDBM_CACHESIZE:                        Options.             (line  27)
* GDBM_CANNOT_REPLACE:                   Error codes.         (line  90)
* GDBM_CANT_BE_READER:                   Error codes.         (line  57)
* GDBM_CANT_BE_WRITER:                   Error codes.         (line  62)
* GDBM_CENTFREE:                         Options.             (line  74)
* gdbm_check_syserr:                     Errors.              (line  41)
* gdbm_clear_error:                      Errors.              (line  56)
* GDBM_CLOEXEC:                          Open.                (line  57)
* gdbm_close:                            Close.               (line   9)
* GDBM_COALESCEBLKS:                     Options.             (line  88)
* gdbm_copy_meta:                        Open.                (line  89)
* gdbm_count:                            Count.               (line   6)
* gdbm_db_strerror:                      Errors.              (line  48)
* gdbm_delete:                           Delete.              (line   8)
* 'gdbm_delete' and sequential access:   Sequential.          (line  60)
* GDBM_DIR_OVERFLOW:                     Error codes.         (line 168)
* gdbm_dump:                             gdbm_dump.           (line   6)
* gdbm_dump <1>:                         Flat files.          (line  46)
* gdbm_dump_to_file:                     Flat files.          (line 147)
* GDBM_EMPTY_DATABASE:                   Error codes.         (line  53)
* gdbm_errlist[]:                        Variables.           (line  16)
* gdbm_errno:                            Variables.           (line   8)
* gdbm_errno <1>:                        Errors.              (line   6)
* GDBM_ERR_FILE_MODE:                    Flat files.          (line 135)
* GDBM_ERR_FILE_MODE <1>:                Error codes.         (line 153)
* GDBM_ERR_FILE_OWNER:                   Flat files.          (line 132)
* GDBM_ERR_FILE_OWNER <1>:               Error codes.         (line 146)
* gdbm_exists:                           Fetch.               (line  39)
* gdbm_export:                           Flat files.          (line 170)
* gdbm_export_to_file:                   Flat files.          (line 179)
* GDBM_FASTMODE:                         Options.             (line  48)
* gdbm_fdesc:                            Locking.             (line  13)
* gdbm_fd_open:                          Open.                (line  79)
* gdbm_fetch:                            Fetch.               (line   6)
* GDBM_FILE_EOF:                         Error codes.         (line 129)
* GDBM_FILE_OPEN_ERROR:                  Error codes.         (line  20)
* GDBM_FILE_READ_ERROR:                  Error codes.         (line  42)
* GDBM_FILE_SEEK_ERROR:                  Error codes.         (line  35)
* GDBM_FILE_STAT_ERROR:                  Error codes.         (line 122)
* GDBM_FILE_WRITE_ERROR:                 Error codes.         (line  28)
* gdbm_firstkey:                         Sequential.          (line  13)
* GDBM_GETBLOCKSIZE:                     Options.             (line 143)
* GDBM_GETCACHESIZE:                     Options.             (line  37)
* GDBM_GETCOALESCEBLKS:                  Options.             (line 100)
* GDBM_GETDBNAME:                        Options.             (line 123)
* GDBM_GETFLAGS:                         Options.             (line  41)
* GDBM_GETMAXMAPSIZE:                    Options.             (line 110)
* GDBM_GETMMAP:                          Options.             (line 119)
* GDBM_GETSYNCMODE:                      Options.             (line  70)
* GDBM_ILLEGAL_DATA:                     Error codes.         (line  96)
* gdbm_import:                           Flat files.          (line 183)
* gdbm_import_from_file:                 Flat files.          (line 196)
* GDBM_INSERT:                           Store.               (line  20)
* GDBM_ITEM_NOT_FOUND:                   Error codes.         (line  81)
* gdbm_last_errno:                       Errors.              (line  21)
* gdbm_last_syserr:                      Errors.              (line  25)
* gdbm_load:                             gdbm_load.           (line   6)
* gdbm_load <1>:                         Flat files.          (line  75)
* gdbm_load_from_file:                   Flat files.          (line 163)
* GDBM_MALLOC_ERROR:                     Error codes.         (line  12)
* gdbm_needs_recovery:                   Errors.              (line  68)
* GDBM_NEED_RECOVERY:                    Error codes.         (line 160)
* GDBM_NEWDB:                            Open.                (line  32)
* gdbm_nextkey:                          Sequential.          (line  25)
* GDBM_NOLOCK:                           Open.                (line  44)
* GDBM_NOLOCK <1>:                       Locking.             (line   6)
* GDBM_NOMMAP:                           Open.                (line  44)
* GDBM_NO_DBNAME:                        Error codes.         (line 140)
* GDBM_NO_ERROR:                         Error codes.         (line   9)
* gdbm_open:                             Open.                (line   6)
* GDBM_OPT_ALREADY_SET:                  Error codes.         (line 100)
* GDBM_OPT_ILLEGAL:                      Error codes.         (line 105)
* GDBM_RCVR_BACKUP:                      Recovery.            (line  96)
* GDBM_RCVR_ERRFUN:                      Recovery.            (line  54)
* GDBM_RCVR_FORCE:                       Recovery.            (line 102)
* GDBM_RCVR_MAX_FAILED_BUCKETS:          Recovery.            (line  68)
* GDBM_RCVR_MAX_FAILED_KEYS:             Recovery.            (line  62)
* GDBM_RCVR_MAX_FAILURES:                Recovery.            (line  75)
* GDBM_READER:                           Open.                (line  32)
* GDBM_READER_CANT_DELETE:               Error codes.         (line  66)
* GDBM_READER_CANT_REORGANIZE:           Error codes.         (line  76)
* GDBM_READER_CANT_STORE:                Error codes.         (line  71)
* gdbm_recover:                          Recovery.            (line  16)
* gdbm_reorganize:                       Reorganization.      (line   8)
* GDBM_REORGANIZE_FAILED:                Error codes.         (line  86)
* GDBM_REPLACE:                          Store.               (line  20)
* GDBM_SETCACHESIZE:                     Options.             (line  27)
* GDBM_SETCENTFREE:                      Options.             (line  74)
* GDBM_SETCOALESCEBLKS:                  Options.             (line  88)
* GDBM_SETMAXMAPSIZE:                    Options.             (line 104)
* GDBM_SETMMAP:                          Options.             (line 114)
* gdbm_setopt:                           Options.             (line   9)
* GDBM_SETSYNCMODE:                      Options.             (line  57)
* gdbm_store:                            Store.               (line   6)
* gdbm_strerror:                         Errors.              (line  12)
* GDBM_SYNC:                             Open.                (line  44)
* GDBM_SYNC <1>:                         Sync.                (line   6)
* gdbm_sync:                             Sync.                (line  14)
* GDBM_SYNCMODE:                         Options.             (line  57)
* gdbm_syserr[]:                         Variables.           (line  23)
* gdbm_version:                          Variables.           (line  34)
* gdbm_version_cmp:                      Variables.           (line  63)
* GDBM_VERSION_MAJOR:                    Variables.           (line  49)
* GDBM_VERSION_MINOR:                    Variables.           (line  52)
* gdbm_version_number[3]:                Variables.           (line  37)
* GDBM_VERSION_PATCH:                    Variables.           (line  55)
* GDBM_WRCREAT:                          Open.                (line  32)
* GDBM_WRITER:                           Open.                (line  32)
* global error state:                    Errors.              (line   6)
* GNU Readline:                          shell.               (line  65)
* hash:                                  commands.            (line  55)
* header:                                commands.            (line  58)
* help:                                  commands.            (line  61)
* history:                               commands.            (line  73)
* history <1>:                           commands.            (line  74)
* history <2>:                           commands.            (line  75)
* import:                                Flat files.          (line   6)
* import <1>:                            commands.            (line  67)
* init file, gdbmtool:                   startup files.       (line   6)
* interactive mode, 'gdbmtool':          shell.               (line   6)
* iterating over records:                Sequential.          (line   6)
* iteration and 'gdbm_delete':           Sequential.          (line  60)
* iteration loop:                        Sequential.          (line  40)
* iteration loop, using 'NDBM':          ndbm.                (line  79)
* junk.gdbm:                             gdbmtool.            (line   9)
* libgdbm_compat:                        Compatibility.       (line  10)
* list:                                  commands.            (line  88)
* lock:                                  variables.           (line 103)
* locking:                               Locking.             (line   6)
* looking up records:                    Fetch.               (line   6)
* max_failed_buckets of gdbm_recovery:   Recovery.            (line  67)
* max_failed_keys of gdbm_recovery:      Recovery.            (line  61)
* max_failures of gdbm_recovery:         Recovery.            (line  74)
* mmap:                                  variables.           (line 109)
* most recent error code:                Errors.              (line  21)
* NDBM functions:                        ndbm.                (line   6)
* ndbm.h:                                Compatibility.       (line  10)
* next:                                  commands.            (line  91)
* nextkey:                               dbm.                 (line  57)
* number of records:                     Count.               (line   6)
* open:                                  variables.           (line  73)
* open <1>:                              commands.            (line 105)
* opening the database:                  Open.                (line   6)
* options, database:                     Options.             (line   6)
* 'pag' file:                            Compatibility.       (line  21)
* pager:                                 variables.           (line  51)
* ps1:                                   variables.           (line  14)
* ps2:                                   variables.           (line  32)
* quiet:                                 variables.           (line  59)
* quit:                                  commands.            (line 129)
* read-only mode, 'gdbmtool':            gdbmtool.            (line  16)
* readline:                              shell.               (line  65)
* record, deleting:                      Delete.              (line   6)
* record, fetching:                      Fetch.               (line   6)
* records, iterating over:               Sequential.          (line   6)
* records, storing:                      Store.               (line   6)
* records, testing existence:            Fetch.               (line  37)
* recover:                               commands.            (line 132)
* recovered_buckets of gdbm_recovery:    Recovery.            (line  86)
* recovered_keys of gdbm_recovery:       Recovery.            (line  83)
* reorganization, database:              Reorganization.      (line   6)
* reorganize:                            commands.            (line 158)
* sequential access:                     Sequential.          (line   6)
* sequential access, using 'NDBM':       ndbm.                (line  79)
* set:                                   variables.           (line 138)
* source:                                commands.            (line 161)
* startup file, gdbmtool:                startup files.       (line   6)
* status:                                commands.            (line 164)
* store:                                 dbm.                 (line  34)
* store <1>:                             commands.            (line 177)
* storing records:                       Store.               (line   6)
* sync:                                  variables.           (line 115)
* synchronization, database:             Sync.                (line   6)
* unset:                                 variables.           (line 175)
* variables, gdbmtool:                   variables.           (line   6)
* version:                               commands.            (line 181)
* version number:                        Variables.           (line  34)



Tag Table:
Node: Top972
Node: Copying3098
Node: Intro4881
Node: List6302
Node: Open7595
Node: Close12114
Node: Count12730
Node: Store13136
Node: Fetch15117
Node: Delete16792
Node: Sequential17559
Node: Reorganization20877
Node: Sync21887
Node: Flat files23137
Ref: gdbm_load function26659
Node: Errors32107
Ref: gdbm_check_syserr33577
Node: Recovery35216
Node: Options39830
Node: Locking45651
Node: Variables46245
Node: Error codes48898
Node: Compatibility55162
Node: ndbm56725
Node: dbm61566
Node: gdbmtool64226
Node: invocation65195
Ref: -q option66775
Node: shell67265
Ref: backslash-interpretation68518
Node: variables70267
Ref: quiet72494
Ref: open parameters72690
Ref: openvar73012
Ref: filemode73875
Node: commands77135
Ref: gdbmtool export78112
Ref: gdbmtool import79333
Node: definitions83478
Node: startup files87670
Node: gdbm_dump88472
Node: gdbm_load89713
Node: Exit codes91590
Node: Bugs92137
Node: Resources93489
Node: GNU Free Documentation License94208
Node: Index119364

End Tag Table