|
--- |
|
license: openrail++ |
|
language: |
|
- en |
|
- zh |
|
tags: |
|
- stable diffusion |
|
- control net |
|
- qr code |
|
--- |
|
** Controlnet QR Bocca for SD-1.5 **控制網QR Bocca適用於SD-1.5 |
|
|
|
## Model Description |
|
The development of this model primarily focuses on beautification and scanning stability. |
|
While this model has good stability, it can still be influenced by the choice of models used in combination. |
|
|
|
## How to Use |
|
1、For QR codes, it is recommended to use version 5 or 6. |
|
2、You can set the parameters according to the original A1111 settings: Step 20 / CFG 7 / Use Euler A for sampling and DPM++ 2M SDE Karras for relative stability. |
|
3、A smaller size might lead to a reduction in scanning rate or image quality. It is recommended to use a minimum size of 768x768. |
|
4、Please try with low weights first, then gradually increase the control net weights using the same seed to achieve an excellent final product. |
|
5、This is very important. Please input a QR code that has not been deformed to ensure stability in the output |
|
|
|
## Example Outputs |
|
Here are some examples of creative, yet scannable QR codes produced by our model: |
|
|
|
|
|
|
|
If you have any other requests, feel free to let me know. |
|
YT: https://www.youtube.com/@JackEllie |
|
DC: https://discord.gg/TM5d89YNwA |
|
|
|
## 模型說明 |
|
此模型的開發主要著重於多風格的美化及加強掃描穩定性 |
|
雖然這個模型的穩定性遠優於從前，但是依然會受到選擇使用搭配的模型影響 |
|
|
|
## 如何使用 |
|
1、QRcode版本建議使用5或6 |
|
2、參數可依照A1111原始參數設定就好(步數 20 / CFG 7 / 取樣方式使用Euler a 和DPM++ 2M SDE Karras相對穩定) |
|
3、較小的尺寸可能會導致掃描率或是畫面品質降低，建議最少使用768*768尺寸 |
|
4、請以低權重嘗試後再使用相同種子將控制網權重慢慢往上調整，以獲得優秀的成品 |
|
5、這非常的重要，請輸入沒有變形過的qrcode，以保證輸出的穩定度 |
|
|
|
## 此模型製作範例圖 |
|
以下是我們的模型生成的一些美化且可掃描的二維碼示例： |
|
|
|
|
|
|
|
開心地玩耍吧!!!有任何有趣的想法記得到杰克艾粒的yt或dc找我們喔~~~ |
|
YT: https://www.youtube.com/@JackEllie |
|
DC: https://discord.gg/TM5d89YNwA |
