Chat & support: TheBloke's Discord server

Want to contribute? TheBloke's Patreon page

TheBloke's LLM work is generously supported by a grant from andreessen horowitz (a16z)

LongAlpaca 70B - AWQ

Model creator: YukangChen
Original model: LongAlpaca 70B

Description

This repo contains AWQ model files for YukangChen's LongAlpaca 70B.

About AWQ

AWQ is an efficient, accurate and blazing-fast low-bit weight quantization method, currently supporting 4-bit quantization. Compared to GPTQ, it offers faster Transformers-based inference.

It is also now supported by continuous batching server vLLM, allowing use of Llama AWQ models for high-throughput concurrent inference in multi-user server scenarios.

As of September 25th 2023, preliminary Llama-only AWQ support has also been added to Huggingface Text Generation Inference (TGI).

Note that, at the time of writing, overall throughput is still lower than running vLLM or TGI with unquantised models, however using AWQ enables using much smaller GPUs which can lead to easier deployment and overall cost savings. For example, a 70B model can be run on 1 x 48GB GPU instead of 2 x 80GB.

Repositories available

Prompt template: Alpaca

Below is an instruction that describes a task. Write a response that appropriately completes the request.

### Instruction:
{prompt}

### Response:

Provided files, and AWQ parameters

For my first release of AWQ models, I am releasing 128g models only. I will consider adding 32g as well if there is interest, and once I have done perplexity and evaluation comparisons, but at this time 32g models are still not fully tested with AutoAWQ and vLLM.

Models are released as sharded safetensors files.

Branch	Bits	GS	AWQ Dataset	Seq Len	Size
main	4	128	wikitext	4096	36.61 GB

Serving this model from vLLM

Documentation on installing and using vLLM can be found here.

Note: at the time of writing, vLLM has not yet done a new release with AWQ support.

If you try the vLLM examples below and get an error about quantization being unrecognised, or other AWQ-related issues, please install vLLM from Github source.

When using vLLM as a server, pass the --quantization awq parameter, for example:

python3 python -m vllm.entrypoints.api_server --model TheBloke/LongAlpaca-70B-AWQ --quantization awq --dtype half

When using vLLM from Python code, pass the quantization=awq parameter, for example:

from vllm import LLM, SamplingParams

prompts = [
    "Hello, my name is",
    "The president of the United States is",
    "The capital of France is",
    "The future of AI is",
]
sampling_params = SamplingParams(temperature=0.8, top_p=0.95)

llm = LLM(model="TheBloke/LongAlpaca-70B-AWQ", quantization="awq", dtype="half")

outputs = llm.generate(prompts, sampling_params)

# Print the outputs.
for output in outputs:
    prompt = output.prompt
    generated_text = output.outputs[0].text
    print(f"Prompt: {prompt!r}, Generated text: {generated_text!r}")

Serving this model from Text Generation Inference (TGI)

Use TGI version 1.1.0 or later. The official Docker container is: ghcr.io/huggingface/text-generation-inference:1.1.0

Example Docker parameters:

--model-id TheBloke/LongAlpaca-70B-AWQ --port 3000 --quantize awq --max-input-length 3696 --max-total-tokens 4096 --max-batch-prefill-tokens 4096

Example Python code for interfacing with TGI (requires huggingface-hub 0.17.0 or later):

pip3 install huggingface-hub

from huggingface_hub import InferenceClient

endpoint_url = "https://your-endpoint-url-here"

prompt = "Tell me about AI"
prompt_template=f'''Below is an instruction that describes a task. Write a response that appropriately completes the request.

### Instruction:
{prompt}

### Response:

'''

client = InferenceClient(endpoint_url)
response = client.text_generation(prompt,
                                  max_new_tokens=128,
                                  do_sample=True,
                                  temperature=0.7,
                                  top_p=0.95,
                                  top_k=40,
                                  repetition_penalty=1.1)

print(f"Model output: {response}")

How to use this AWQ model from Python code

Install the necessary packages

Requires: AutoAWQ 0.1.1 or later

pip3 install autoawq

If you have problems installing AutoAWQ using the pre-built wheels, install it from source instead:

pip3 uninstall -y autoawq
git clone https://github.com/casper-hansen/AutoAWQ
cd AutoAWQ
pip3 install .

You can then try the following example code

from awq import AutoAWQForCausalLM
from transformers import AutoTokenizer

model_name_or_path = "TheBloke/LongAlpaca-70B-AWQ"

# Load model
model = AutoAWQForCausalLM.from_quantized(model_name_or_path, fuse_layers=True,
                                          trust_remote_code=False, safetensors=True)
tokenizer = AutoTokenizer.from_pretrained(model_name_or_path, trust_remote_code=False)

prompt = "Tell me about AI"
prompt_template=f'''Below is an instruction that describes a task. Write a response that appropriately completes the request.

### Instruction:
{prompt}

### Response:

'''

print("\n\n*** Generate:")

tokens = tokenizer(
    prompt_template,
    return_tensors='pt'
).input_ids.cuda()

# Generate output
generation_output = model.generate(
    tokens,
    do_sample=True,
    temperature=0.7,
    top_p=0.95,
    top_k=40,
    max_new_tokens=512
)

print("Output: ", tokenizer.decode(generation_output[0]))

"""
# Inference should be possible with transformers pipeline as well in future
# But currently this is not yet supported by AutoAWQ (correct as of September 25th 2023)
from transformers import pipeline

print("*** Pipeline:")
pipe = pipeline(
    "text-generation",
    model=model,
    tokenizer=tokenizer,
    max_new_tokens=512,
    do_sample=True,
    temperature=0.7,
    top_p=0.95,
    top_k=40,
    repetition_penalty=1.1
)

print(pipe(prompt_template)[0]['generated_text'])
"""

Compatibility

The files provided are tested to work with:

TGI merged AWQ support on September 25th, 2023: TGI PR #1054. Use the :latest Docker container until the next TGI release is made.

Discord

For further support, and discussions on these models and AI in general, join us at:

TheBloke AI's Discord server

Thanks, and how to contribute

Thanks to the chirper.ai team!

Thanks to Clay from gpus.llm-utils.org!

I've had a lot of people ask if they can contribute. I enjoy providing models and helping people, and would love to be able to spend even more time doing it, as well as expanding into new projects like fine tuning/training.

If you're able and willing to contribute it will be most gratefully received and will help me to keep providing more models, and to start work on new AI projects.

Donaters will get priority support on any and all AI/LLM/model questions and requests, access to a private Discord room, plus other benefits.

Patreon: https://patreon.com/TheBlokeAI
Ko-Fi: https://ko-fi.com/TheBlokeAI

Special thanks to: Aemon Algiz.

Patreon special mentions: Pierre Kircher, Stanislav Ovsiannikov, Michael Levine, Eugene Pentland, Andrey, 준교 김, Randy H, Fred von Graf, Artur Olbinski, Caitlyn Gatomon, terasurfer, Jeff Scroggin, James Bentley, Vadim, Gabriel Puliatti, Harry Royden McLaughlin, Sean Connelly, Dan Guido, Edmond Seymore, Alicia Loh, subjectnull, AzureBlack, Manuel Alberto Morcote, Thomas Belote, Lone Striker, Chris Smitley, Vitor Caleffi, Johann-Peter Hartmann, Clay Pascal, biorpg, Brandon Frisco, sidney chen, transmissions 11, Pedro Madruga, jinyuan sun, Ajan Kanaga, Emad Mostaque, Trenton Dambrowitz, Jonathan Leane, Iucharbius, usrbinkat, vamX, George Stoitzev, Luke Pendergrass, theTransient, Olakabola, Swaroop Kallakuri, Cap'n Zoog, Brandon Phillips, Michael Dempsey, Nikolai Manek, danny, Matthew Berman, Gabriel Tamborski, alfie_i, Raymond Fosdick, Tom X Nguyen, Raven Klaugh, LangChain4j, Magnesian, Illia Dulskyi, David Ziegler, Mano Prime, Luis Javier Navarrete Lozano, Erik Bjäreholt, 阿明, Nathan Dryer, Alex, Rainer Wilmers, zynix, TL, Joseph William Delisle, John Villwock, Nathan LeClaire, Willem Michiel, Joguhyik, GodLy, OG, Alps Aficionado, Jeffrey Morgan, ReadyPlayerEmma, Tiffany J. Kim, Sebastain Graf, Spencer Kim, Michael Davis, webtim, Talal Aujan, knownsqashed, John Detwiler, Imad Khwaja, Deo Leter, Jerry Meng, Elijah Stavena, Rooh Singh, Pieter, SuperWojo, Alexandros Triantafyllidis, Stephen Murray, Ai Maven, ya boyyy, Enrico Ros, Ken Nordquist, Deep Realms, Nicholas, Spiking Neurons AB, Elle, Will Dee, Jack West, RoA, Luke @flexchar, Viktor Bowallius, Derek Yates, Subspace Studios, jjj, Toran Billups, Asp the Wyvern, Fen Risland, Ilya, NimbleBox.ai, Chadd, Nitin Borwankar, Emre, Mandus, Leonard Tan, Kalila, K, Trailburnt, S_X, Cory Kujawski

Thank you to all my generous patrons and donaters!

And thank you again to a16z for their generous grant.

Original model card: YukangChen's LongAlpaca 70B

LongLoRA and LongAlpaca for Long-context LLMs

For detailed usage and codes, please visit the Github project.

News
Examples
Highlights
How to contribute
Requirements
Installation and quick guide
LongAlpaca Data
Models
Training
Evaluation
Demo
Data Generation via Pdf2Text
Citation
Acknowledgement
License

News

[2023.10.8] We release the long instruction-following dataset, LongAlpaca-12k and the corresponding models, LongAlpaca-7B, LongAlpaca-13B, and LongAlpaca-70B.
(The previous sft models, Llama-2-13b-chat-longlora-32k-sft and Llama-2-70b-chat-longlora-32k-sft, have been depreciated.)
[2023.10.3] We add support GPTNeoX models. Please refer to this PR for usage. Thanks for @naubull2 for this contribution.
[2023.9.22] We release all our fine-tuned models, including 70B-32k models, LLaMA2-LongLoRA-70B-32k, LLaMA2-LongLoRA-7B-100k. Welcome to check them out!
[2023.9.22] We release Paper and this GitHub repo, including training and evaluation code.

LongLoRA: Efficient Fine-tuning of Long-Context Large Language Models [Paper]
Yukang Chen, Shengju Qian, Haotian Tang, Xin Lai, Zhijian Liu, Song Han, Jiaya Jia

Highlights

In LongLoRA approach, The proposed shifted short attention is easy to implement, compatible with Flash-Attention, and is not required during inference.
We released all our models, including models from 7B to 70B, context length from 8k to 100k, including LLaMA2-LongLoRA-7B-100k, LLaMA2-LongLoRA-13B-64k, and LLaMA2-LongLoRA-70B-32k.
We built up a long-context instruction-following dataset, LongAlpaca-12k. We released the corresponding LongAlpaca-7B, LongAlpaca-13B and LongAlpaca-70B models. To our best knowledge, this is the first open-sourced long-context 70B model.

How to Contribute

Make sure to have git installed.
Create your own fork of the project.
Clone the repository on your local machine, using git clone and pasting the url of this project.
Read both the Requirements and Installation and Quick Guide sections below.
Commit and push your changes.
Make a pull request when finished modifying the project.

Usage Requirements

To download and use the pre-trained weights you will need:

Hugging Face (HF) account with valid email. Note, the email used for HF must alse be used for the license agreement.
Accept the Meta license and acceptable use policy

Installation and Quick Guide

To install and run the application:

Fork this repo on github
Clone the repository on your local machine, using git clone and pasting the url of this project.
Run the following code:

pip install -r requirements.txt
pip install flash-attn --no-build-isolation

Use either a Released model or Fine tune a model to fit your preferences.
Test your model by chat.
Deploy your own demo.

LongAlpaca Data

LongAlpaca-12k contains 9k long QA data that we collected and 3k short QA sampled from the original Alpaca data. This is to avoid the case that the model might degrade at short instruction following. The data we collect contains various types and amounts as the following figure.

Data	Short QA	Long QA	Total	Download
LongAlpaca-12k	3k	9k	12k	Link

Following the original Alpaca format, our Long QA data uses the following prompts for fine-tuning:

instruction: str, describes the task the model should perform. For example, to answer a question after reading a book section or paper. We vary the contents and questions to make instructions diverse.
output: str, the answer to the instruction.

We did not use the input format in the Alpaca format for simplicity.

Models

Models with supervised fine-tuning

Model	Size	Context	Train	Link
LongAlpaca-7B	7B	32768	Full FT	Model
LongAlpaca-13B	13B	32768	Full FT	Model
LongAlpaca-70B	70B	32768	LoRA+	Model (LoRA-weight)

Models with context extension via fully fine-tuning

Model	Size	Context	Train	Link
Llama-2-7b-longlora-8k-ft	7B	8192	Full FT	Model
Llama-2-7b-longlora-16k-ft	7B	16384	Full FT	Model
Llama-2-7b-longlora-32k-ft	7B	32768	Full FT	Model
Llama-2-7b-longlora-100k-ft	7B	100000	Full FT	Model
Llama-2-13b-longlora-8k-ft	13B	8192	Full FT	Model
Llama-2-13b-longlora-16k-ft	13B	16384	Full FT	Model
Llama-2-13b-longlora-32k-ft	13B	32768	Full FT	Model

Models with context extension via improved LoRA fine-tuning

Model	Size	Context	Train	Link
Llama-2-7b-longlora-8k	7B	8192	LoRA+	LoRA-weight
Llama-2-7b-longlora-16k	7B	16384	LoRA+	LoRA-weight
Llama-2-7b-longlora-32k	7B	32768	LoRA+	LoRA-weight
Llama-2-13b-longlora-8k	13B	8192	LoRA+	LoRA-weight
Llama-2-13b-longlora-16k	13B	16384	LoRA+	LoRA-weight
Llama-2-13b-longlora-32k	13B	32768	LoRA+	LoRA-weight
Llama-2-13b-longlora-64k	13B	65536	LoRA+	LoRA-weight
Llama-2-70b-longlora-32k	70B	32768	LoRA+	LoRA-weight
Llama-2-70b-chat-longlora-32k	70B	32768	LoRA+	LoRA-weight

Training

Pre-trained weights

We use LLaMA2 models as the pre-trained weights and fine-tune them to long context window sizes. Download based on your choices.

Pre-trained weights
Llama-2-7b-hf
Llama-2-13b-hf
Llama-2-70b-hf
Llama-2-7b-chat-hf
Llama-2-13b-chat-hf
Llama-2-70b-chat-hf

This project also supports GPTNeoX models as the base model architecture. Some candidate pre-trained weights may include GPT-NeoX-20B, Polyglot-ko-12.8B and other variants.

Fine-tuning

torchrun --nproc_per_node=8 fine-tune.py  \
        --model_name_or_path path_to/Llama-2-7b-hf \
        --bf16 True \
        --output_dir path_to_saving_checkpoints       \
        --cache_dir path_to_cache \
        --model_max_length 8192 \
        --use_flash_attn True \
        --low_rank_training False \
        --num_train_epochs 1  \
        --per_device_train_batch_size 1     \
        --per_device_eval_batch_size 2     \
        --gradient_accumulation_steps 8     \
        --evaluation_strategy "no"     \
        --save_strategy "steps"     \
        --save_steps 1000     \
        --save_total_limit 2     \
        --learning_rate 2e-5     \
        --weight_decay 0.0     \
        --warmup_steps 20     \
        --lr_scheduler_type "constant_with_warmup"     \
        --logging_steps 1     \
        --deepspeed "ds_configs/stage2.json" \
        --tf32 True \
        --max_steps 1000

Please remember to change path_to/Llama-2-7b-hf, path_to_saving_checkpoints, path_to_cache to your own directory.
Note that you can change model_max_length to other values.
You could change ds_configs/stage2.json to ds_configs/stage3.json if you want.
Please set use_flash_attn as False if you use V100 machines or do not install flash attention.
You can set low_rank_training as False if you want to use fully fine-tuning. It will cost more GPU memory and slower, but the performance will be a bit better.
When training is finished, to get the full model weight:

cd path_to_saving_checkpoints && python zero_to_fp32.py . pytorch_model.bin

Supervised Fine-tuning

torchrun --nproc_per_node=8 supervised-fine-tune.py  \
        --model_name_or_path path_to_Llama2_chat_models \
        --bf16 True \
        --output_dir path_to_saving_checkpoints       \
        --model_max_length 32768 \
        --use_flash_attn True \
        --data_path LongAlpaca-12k.json \
        --low_rank_training True \
        --num_train_epochs 3  \
        --per_device_train_batch_size 1     \
        --per_device_eval_batch_size 2     \
        --gradient_accumulation_steps 1     \
        --evaluation_strategy "no"     \
        --save_strategy "steps"     \
        --save_steps 1000     \
        --save_total_limit 2     \
        --learning_rate 2e-5     \
        --weight_decay 0.0     \
        --warmup_steps 20     \
        --lr_scheduler_type "constant_with_warmup"     \
        --logging_steps 1     \
        --deepspeed "ds_configs/stage2.json" \
        --tf32 True

There is no need to make supervised fine-tuning upon the fine-tuned context extended models. It is all right to directly use base model as Llama2-chat models, as the amount of long instruction following data is enough for SFT.
Our long instruction following data can be found in LongAlpaca-12k.json.

Get trainable weights in low-rank training

In low-rank training, we set embedding and normalization layers as trainable. Please use the following line to extract the trainable weights trainable_params.bin from pytorch_model.bin

python3 get_trainable_weights.py --checkpoint_path path_to_saving_checkpoints --trainable_params "embed,norm"

Merge LoRA Weight

Merge the LoRA weights of pytorch_model.bin and trainable parameters trainable_params.bin, save the resulting model into your desired path in the Hugging Face format:

python3 merge_lora_weights_and_save_hf_model.py \
        --base_model path_to/Llama-2-7b-hf \
        --peft_model path_to_saving_checkpoints \
        --context_size 8192 \
        --save_path path_to_saving_merged_model

For example,

python3 merge_lora_weights_and_save_hf_model.py \
        --base_model /dataset/pretrained-models/Llama-2-7b-hf \
        --peft_model /dataset/yukangchen/hf_models/lora-models/Llama-2-7b-longlora-8k \
        --context_size 8192 \
        --save_path /dataset/yukangchen/models/Llama-2-7b-longlora-8k-merged

Evaluation

Perplexity Validation

To evaluate a model that is trained in the low-rank setting, please set both base_model and peft_model. base_model is the pre-trained weight. peft_model is the path to the saved checkpoint, which should contain trainable_params.bin, adapter_model.bin and adapter_config.json. For example,

python3 eval.py --seq_len 8192 --context_size 8192 --batch_size 1 --base_model path_to/Llama-2-7b-hf --peft_model path_to_saving_checkpoints --data_path pg19/test.bin

To evaluate a model that is fully fine-tuned, you only need to set base_model as the path to the saved checkpoint, which should contain pytorch_model.bin and config.json. peft_model should be ignored.

python3 eval.py --seq_len 8192 --context_size 8192 --batch_size 1 --base_model path_to_saving_checkpoints --data_path pg19/test.bin

Note that --seq_len is to set the sequence length for evaluation. --context_size is to set the context length of the model during fine-tuning. --seq_len should not be larger than --context_size.
We have already tokenized the validation and test splits of PG19 and proof-pile dataset into pg19/validation.bin, pg19/test.bin, and proof-pile/test_sampled_data.bin, with the tokenizer of LLaMA. proof-pile/test_sampled_data.bin contains 128 documents that are randomly sampled from the total proof-pile test split. For each document, it has at least 32768 tokens. We also release the sampled ids in proof-pile/test_sampled_ids.bin. You can download them from the links below.

Dataset	Split	Link
PG19	validation	pg19/validation.bin
PG19	test	pg19/test.bin
Proof-pile	test	proof-pile/test_sampled_data.bin

Passkey Retrieval

We provide a manner to test the passkey retrieval accuracy. For example,

python3 passkey_retrivial.py \
        --context_size 32768 \
        --base_model path_to/Llama-2-7b-longlora-32k \
        --max_tokens 32768 \
        --interval 1000

Note that the context_size is the context length during fine-tuning.
max_tokens is maximum length for the document in passkey retrieval evaluation.
interval is the interval during the document length increasing. It is a rough number because the document increases by sentences.

Demo

Local Inference

To chat with Llama-2-13b-chat-longlora-32k-sft or Llama-2-70b-chat-longlora-32k-sft, you need to run merge_lora_weights_and_save_hf_model.py first, and then:

python3 inference.py  \
        --base_model path_to_model \
        --question $question \
        --context_size $context_length \
        --max_gen_len $max_gen_len \
        --flash_attn True \
        --material $material_content \
        --material_type $material_type \
        --material_title $material_title

To ask a question related to a book:

python3 inference.py  \
        --base_model /data/models/Llama-2-13b-chat-longlora-32k-sft \
        --question "Why doesn't Professor Snape seem to like Harry?" \
        --context_size 32768 \
        --max_gen_len 512 \
        --flash_attn True \
        --material "materials/Harry Potter and the Philosophers Stone_section2.txt" \
        --material_type "book" \
        --material_title "Harry Potter and the Philosophers Stone"

Note that you can ignore material_type or material_title.

To ask a question related to a paper:

python3 inference.py  \
        --base_model /data/models/Llama-2-13b-chat-longlora-32k-sft \
        --question "What are the main contributions and novelties of this work?" \
        --context_size 32768 \
        --max_gen_len 512 \
        --flash_attn True \
        --material "materials/paper1.txt" \
        --material_type "paper"

Online Demo

To deploy your own demo run

python3 demo.py  \
    --base_model path_to_model \
    --context_size $context_size \
    --max_gen_len $max_gen_len \
    --flash_attn True

Example

python3 demo.py  \
    --base_model /data/models/Llama-2-13b-chat-longlora-32k-sft \
    --context_size 32768 \
    --max_gen_len 512 \
    --flash_attn True

Note that flash_attn=True will make the generation slow but save much GPU memory.

Data Generation via Pdf2text

During our dataset collection, we convert paper and books from pdf to text. The conversion quality has a large influence on the final model quality. We think that this step is non-trivial. We release the tool for the pdf2txt conversion, in the folder pdf2txt. It is built upon pdf2image, easyocr, ditod and detectron2. Please refer to the README.md in pdf2txt for more details.

Citation

If you find this project useful in your research, please consider citing:

@article{longlora,
  title={LongLoRA: Efficient Fine-tuning of Long-Context Large Language Models},
  author={Yukang Chen and Shengju Qian and Haotian Tang and Xin Lai and Zhijian Liu and Song Han and Jiaya Jia},
  journal={arXiv:2309.12307},
  year={2023}
}

@misc{long-alpaca,
  author = {Yukang Chen and Shaozuo Yu and Shengju Qian and Haotian Tang and Xin Lai and Zhijian Liu and Song Han and Jiaya Jia},
  title = {Long Alpaca: Long-context Instruction-following models},
  year = {2023},
  publisher = {GitHub},
  journal = {GitHub repository},
  howpublished = {\url{https://github.com/dvlab-research/LongLoRA}},
}

Acknowledgement

This work is built upon the LLaMA2 as the pre-trained models.
This work can also be built upon the GPTNeoX-HF which is based upon EleutherAI/GPTNeoX as the pre-trained model architecture.
This work is based on DeepSpeed, peft, and Flash-Attention2 for acceleration.
Some evaluation code is modified upon Landmark Attention.
We use LongChat for the retrieval evaluation.

License

LongLoRA is licensed under the Apache License 2.0. This means that it requires the preservation of copyright and license notices.
Data and weights are under CC-BY-NC 4.0 License. They are licensed for research use only, and allowed only non-commercial. Models trained using the dataset should not be used outside of research purposes.