inputs
stringlengths 127
2.29k
| targets
stringlengths 1
1.65k
|
|---|---|
Given the following passage
"Eventually, when it was more common for electric recordings to be played back electrically in the 1930s and 1940s, the overall tone was much like listening to a radio of the era. Magnetic pickups became more common and were better designed as time went on, making it possible to improve the damping of spurious resonances. Crystal pickups were also introduced as lower cost alternatives. The dynamic or moving coil microphone was introduced around 1930 and the velocity or ribbon microphone in 1932. Both of these high quality microphones became widespread in motion picture, radio, recording, and public address applications.",
answer the following question. Note that the answer is present within the text.
Question: What did someone do to save a recording for later in the 1940's? | electric recordings |
Given the following passage
"Eventually, when it was more common for electric recordings to be played back electrically in the 1930s and 1940s, the overall tone was much like listening to a radio of the era. Magnetic pickups became more common and were better designed as time went on, making it possible to improve the damping of spurious resonances. Crystal pickups were also introduced as lower cost alternatives. The dynamic or moving coil microphone was introduced around 1930 and the velocity or ribbon microphone in 1932. Both of these high quality microphones became widespread in motion picture, radio, recording, and public address applications.",
answer the following question. Note that the answer is present within the text.
Question: What drove microphone design in the 1940's? | lower cost alternatives |
Given the following passage
"Vinyl records can be warped by heat, improper storage, exposure to sunlight, or manufacturing defects such as excessively tight plastic shrinkwrap on the album cover. A small degree of warp was common, and allowing for it was part of the art of turntable and tonearm design. "wow" (once-per-revolution pitch variation) could result from warp, or from a spindle hole that was not precisely centered. Standard practice for LPs was to place the LP in a paper or plastic inner cover. This, if placed within the outer cardboard cover so that the opening was entirely within the outer cover, was said to reduce ingress of dust onto the record surface. Singles, with rare exceptions, had simple paper covers with no inner cover.",
answer the following question. Note that the answer is present within the text.
Question: What was the result of correctly sheathing a record? | reduce ingress of dust onto the record surface |
Given the following passage
"Vinyl records can be warped by heat, improper storage, exposure to sunlight, or manufacturing defects such as excessively tight plastic shrinkwrap on the album cover. A small degree of warp was common, and allowing for it was part of the art of turntable and tonearm design. "wow" (once-per-revolution pitch variation) could result from warp, or from a spindle hole that was not precisely centered. Standard practice for LPs was to place the LP in a paper or plastic inner cover. This, if placed within the outer cardboard cover so that the opening was entirely within the outer cover, was said to reduce ingress of dust onto the record surface. Singles, with rare exceptions, had simple paper covers with no inner cover.",
answer the following question. Note that the answer is present within the text.
Question: What is the result of sheathing a record correctly? | reduce ingress of dust onto the record surface |
Given the following passage
"Vinyl records can be warped by heat, improper storage, exposure to sunlight, or manufacturing defects such as excessively tight plastic shrinkwrap on the album cover. A small degree of warp was common, and allowing for it was part of the art of turntable and tonearm design. "wow" (once-per-revolution pitch variation) could result from warp, or from a spindle hole that was not precisely centered. Standard practice for LPs was to place the LP in a paper or plastic inner cover. This, if placed within the outer cardboard cover so that the opening was entirely within the outer cover, was said to reduce ingress of dust onto the record surface. Singles, with rare exceptions, had simple paper covers with no inner cover.",
answer the following question. Note that the answer is present within the text.
Question: What is the result of storing a record properly? | reduce ingress of dust onto the record surface |
Given the following passage
"Vinyl records can be warped by heat, improper storage, exposure to sunlight, or manufacturing defects such as excessively tight plastic shrinkwrap on the album cover. A small degree of warp was common, and allowing for it was part of the art of turntable and tonearm design. "wow" (once-per-revolution pitch variation) could result from warp, or from a spindle hole that was not precisely centered. Standard practice for LPs was to place the LP in a paper or plastic inner cover. This, if placed within the outer cardboard cover so that the opening was entirely within the outer cover, was said to reduce ingress of dust onto the record surface. Singles, with rare exceptions, had simple paper covers with no inner cover.",
answer the following question. Note that the answer is present within the text.
Question: What is the result of properly storing a record? | reduce ingress of dust onto the record surface |
Given the following passage
"Vinyl records can be warped by heat, improper storage, exposure to sunlight, or manufacturing defects such as excessively tight plastic shrinkwrap on the album cover. A small degree of warp was common, and allowing for it was part of the art of turntable and tonearm design. "wow" (once-per-revolution pitch variation) could result from warp, or from a spindle hole that was not precisely centered. Standard practice for LPs was to place the LP in a paper or plastic inner cover. This, if placed within the outer cardboard cover so that the opening was entirely within the outer cover, was said to reduce ingress of dust onto the record surface. Singles, with rare exceptions, had simple paper covers with no inner cover.",
answer the following question. Note that the answer is present within the text.
Question: What is the result of storing a record correctly? | reduce ingress of dust onto the record surface |
Given the following passage
"Delicate sounds and fine overtones were mostly lost, because it took a lot of sound energy to vibrate the recording horn diaphragm and cutting mechanism. There were acoustic limitations due to mechanical resonances in both the recording and playback system. Some pictures of acoustic recording sessions show horns wrapped with tape to help mute these resonances. Even an acoustic recording played back electrically on modern equipment sounds like it was recorded through a horn, notwithstanding a reduction in distortion because of the modern playback. Toward the end of the acoustic era, there were many fine examples of recordings made with horns.",
answer the following question. Note that the answer is present within the text.
Question: What issues did delicate sounds have due to the recording of horn diaphragm and cutting mechanism? | were mostly lost |
Given the following passage
"Delicate sounds and fine overtones were mostly lost, because it took a lot of sound energy to vibrate the recording horn diaphragm and cutting mechanism. There were acoustic limitations due to mechanical resonances in both the recording and playback system. Some pictures of acoustic recording sessions show horns wrapped with tape to help mute these resonances. Even an acoustic recording played back electrically on modern equipment sounds like it was recorded through a horn, notwithstanding a reduction in distortion because of the modern playback. Toward the end of the acoustic era, there were many fine examples of recordings made with horns.",
answer the following question. Note that the answer is present within the text.
Question: What issue led to the horns getting wraped with tape? | mechanical resonances |
Given the following passage
"Delicate sounds and fine overtones were mostly lost, because it took a lot of sound energy to vibrate the recording horn diaphragm and cutting mechanism. There were acoustic limitations due to mechanical resonances in both the recording and playback system. Some pictures of acoustic recording sessions show horns wrapped with tape to help mute these resonances. Even an acoustic recording played back electrically on modern equipment sounds like it was recorded through a horn, notwithstanding a reduction in distortion because of the modern playback. Toward the end of the acoustic era, there were many fine examples of recordings made with horns.",
answer the following question. Note that the answer is present within the text.
Question: What issues did the horns have due to mechanical resonances? | Delicate sounds and fine overtones were mostly lost |
Given the following passage
"In 1925, 78.26 rpm was chosen as the standard because of the introduction of the electrically powered synchronous turntable motor. This motor ran at 3600 rpm, such that a 46:1 gear ratio would produce 78.26 rpm. In parts of the world that used 50 Hz current, the standard was 77.92 rpm (3,000 rpm with a 77:2 ratio), which was also the speed at which a strobe disc with 77 lines would "stand still" in 50 Hz light (92 lines for 60 Hz). After World War II these records were retroactively known as 78s, to distinguish them from other newer disc record formats. Earlier they were just called records, or when there was a need to distinguish them from cylinders, disc records.",
answer the following question. Note that the answer is present within the text.
Question: How were the rpms originally determined? | the electrically powered synchronous turntable motor |
Given the following passage
"In 1925, 78.26 rpm was chosen as the standard because of the introduction of the electrically powered synchronous turntable motor. This motor ran at 3600 rpm, such that a 46:1 gear ratio would produce 78.26 rpm. In parts of the world that used 50 Hz current, the standard was 77.92 rpm (3,000 rpm with a 77:2 ratio), which was also the speed at which a strobe disc with 77 lines would "stand still" in 50 Hz light (92 lines for 60 Hz). After World War II these records were retroactively known as 78s, to distinguish them from other newer disc record formats. Earlier they were just called records, or when there was a need to distinguish them from cylinders, disc records.",
answer the following question. Note that the answer is present within the text.
Question: What was the exception to the standard number? | parts of the world that used 50 Hz current, the standard was 77.92 rpm |
Given the following passage
"In 1925, 78.26 rpm was chosen as the standard because of the introduction of the electrically powered synchronous turntable motor. This motor ran at 3600 rpm, such that a 46:1 gear ratio would produce 78.26 rpm. In parts of the world that used 50 Hz current, the standard was 77.92 rpm (3,000 rpm with a 77:2 ratio), which was also the speed at which a strobe disc with 77 lines would "stand still" in 50 Hz light (92 lines for 60 Hz). After World War II these records were retroactively known as 78s, to distinguish them from other newer disc record formats. Earlier they were just called records, or when there was a need to distinguish them from cylinders, disc records.",
answer the following question. Note that the answer is present within the text.
Question: The initial standard was determined in a time before what? | World War II |
Given the following passage
"In 1925, 78.26 rpm was chosen as the standard because of the introduction of the electrically powered synchronous turntable motor. This motor ran at 3600 rpm, such that a 46:1 gear ratio would produce 78.26 rpm. In parts of the world that used 50 Hz current, the standard was 77.92 rpm (3,000 rpm with a 77:2 ratio), which was also the speed at which a strobe disc with 77 lines would "stand still" in 50 Hz light (92 lines for 60 Hz). After World War II these records were retroactively known as 78s, to distinguish them from other newer disc record formats. Earlier they were just called records, or when there was a need to distinguish them from cylinders, disc records.",
answer the following question. Note that the answer is present within the text.
Question: What does HZ measure? | light |
Given the following passage
"In 1925, 78.26 rpm was chosen as the standard because of the introduction of the electrically powered synchronous turntable motor. This motor ran at 3600 rpm, such that a 46:1 gear ratio would produce 78.26 rpm. In parts of the world that used 50 Hz current, the standard was 77.92 rpm (3,000 rpm with a 77:2 ratio), which was also the speed at which a strobe disc with 77 lines would "stand still" in 50 Hz light (92 lines for 60 Hz). After World War II these records were retroactively known as 78s, to distinguish them from other newer disc record formats. Earlier they were just called records, or when there was a need to distinguish them from cylinders, disc records.",
answer the following question. Note that the answer is present within the text.
Question: What was an indication of the time period of the standards? | After World War II these records were retroactively known as 78s |
Given the following passage
"In 1901, 10-inch disc records were introduced, followed in 1903 by 12-inch records. These could play for more than three and four minutes respectively, while contemporary cylinders could only play for about two minutes. In an attempt to head off the disc advantage, Edison introduced the Amberol cylinder in 1909, with a maximum playing time of 4½ minutes (at 160 rpm), which in turn were superseded by Blue Amberol Records, which had a playing surface made of celluloid, a plastic, which was far less fragile. Despite these improvements, during the 1910s discs decisively won this early format war, although Edison continued to produce new Blue Amberol cylinders for an ever-dwindling customer base until late in 1929. By 1919 the basic patents for the manufacture of lateral-cut disc records had expired, opening the field for countless companies to produce them. Analog disc records would dominate the home entertainment market until they were outsold by the digital compact disc in the late 1980s (which was in turn supplanted by digital audio recordings distributed via online music stores and Internet file sharing).",
answer the following question. Note that the answer is present within the text.
Question: 10 inch disc records, unlike cylinders of contemporary use could play for how long? | three and four minutes |
Given the following passage
"In 1901, 10-inch disc records were introduced, followed in 1903 by 12-inch records. These could play for more than three and four minutes respectively, while contemporary cylinders could only play for about two minutes. In an attempt to head off the disc advantage, Edison introduced the Amberol cylinder in 1909, with a maximum playing time of 4½ minutes (at 160 rpm), which in turn were superseded by Blue Amberol Records, which had a playing surface made of celluloid, a plastic, which was far less fragile. Despite these improvements, during the 1910s discs decisively won this early format war, although Edison continued to produce new Blue Amberol cylinders for an ever-dwindling customer base until late in 1929. By 1919 the basic patents for the manufacture of lateral-cut disc records had expired, opening the field for countless companies to produce them. Analog disc records would dominate the home entertainment market until they were outsold by the digital compact disc in the late 1980s (which was in turn supplanted by digital audio recordings distributed via online music stores and Internet file sharing).",
answer the following question. Note that the answer is present within the text.
Question: Parkesine and Xylonite are the first examples of what kind of compounds? | celluloid |
Given the following passage
"In 1901, 10-inch disc records were introduced, followed in 1903 by 12-inch records. These could play for more than three and four minutes respectively, while contemporary cylinders could only play for about two minutes. In an attempt to head off the disc advantage, Edison introduced the Amberol cylinder in 1909, with a maximum playing time of 4½ minutes (at 160 rpm), which in turn were superseded by Blue Amberol Records, which had a playing surface made of celluloid, a plastic, which was far less fragile. Despite these improvements, during the 1910s discs decisively won this early format war, although Edison continued to produce new Blue Amberol cylinders for an ever-dwindling customer base until late in 1929. By 1919 the basic patents for the manufacture of lateral-cut disc records had expired, opening the field for countless companies to produce them. Analog disc records would dominate the home entertainment market until they were outsold by the digital compact disc in the late 1980s (which was in turn supplanted by digital audio recordings distributed via online music stores and Internet file sharing).",
answer the following question. Note that the answer is present within the text.
Question: How long could Thomas Edison's late cylinders play in order to compete with disc records? | 4½ minutes |
Given the following passage
"In 1901, 10-inch disc records were introduced, followed in 1903 by 12-inch records. These could play for more than three and four minutes respectively, while contemporary cylinders could only play for about two minutes. In an attempt to head off the disc advantage, Edison introduced the Amberol cylinder in 1909, with a maximum playing time of 4½ minutes (at 160 rpm), which in turn were superseded by Blue Amberol Records, which had a playing surface made of celluloid, a plastic, which was far less fragile. Despite these improvements, during the 1910s discs decisively won this early format war, although Edison continued to produce new Blue Amberol cylinders for an ever-dwindling customer base until late in 1929. By 1919 the basic patents for the manufacture of lateral-cut disc records had expired, opening the field for countless companies to produce them. Analog disc records would dominate the home entertainment market until they were outsold by the digital compact disc in the late 1980s (which was in turn supplanted by digital audio recordings distributed via online music stores and Internet file sharing).",
answer the following question. Note that the answer is present within the text.
Question: What term is used to refer to the side part of something, or a position farther from the median plane? | lateral |
Given the following passage
"In 1901, 10-inch disc records were introduced, followed in 1903 by 12-inch records. These could play for more than three and four minutes respectively, while contemporary cylinders could only play for about two minutes. In an attempt to head off the disc advantage, Edison introduced the Amberol cylinder in 1909, with a maximum playing time of 4½ minutes (at 160 rpm), which in turn were superseded by Blue Amberol Records, which had a playing surface made of celluloid, a plastic, which was far less fragile. Despite these improvements, during the 1910s discs decisively won this early format war, although Edison continued to produce new Blue Amberol cylinders for an ever-dwindling customer base until late in 1929. By 1919 the basic patents for the manufacture of lateral-cut disc records had expired, opening the field for countless companies to produce them. Analog disc records would dominate the home entertainment market until they were outsold by the digital compact disc in the late 1980s (which was in turn supplanted by digital audio recordings distributed via online music stores and Internet file sharing).",
answer the following question. Note that the answer is present within the text.
Question: 10-inch disc records and 12-inch records were where physical sound storage media, also called? | Analog disc records |
Given the following passage
"In October 1745, Ewald Georg von Kleist of Pomerania, Germany, found that charge could be stored by connecting a high-voltage electrostatic generator by a wire to a volume of water in a hand-held glass jar. Von Kleist's hand and the water acted as conductors, and the jar as a dielectric (although details of the mechanism were incorrectly identified at the time). Von Kleist found that touching the wire resulted in a powerful spark, much more painful than that obtained from an electrostatic machine. The following year, the Dutch physicist Pieter van Musschenbroek invented a similar capacitor, which was named the Leyden jar, after the University of Leiden where he worked. He also was impressed by the power of the shock he received, writing, "I would not take a second shock for the kingdom of France."",
answer the following question. Note that the answer is present within the text.
Question: The inventors mentioned in this passage are from France and...? | Pomerania, Germany |
Given the following passage
"In October 1745, Ewald Georg von Kleist of Pomerania, Germany, found that charge could be stored by connecting a high-voltage electrostatic generator by a wire to a volume of water in a hand-held glass jar. Von Kleist's hand and the water acted as conductors, and the jar as a dielectric (although details of the mechanism were incorrectly identified at the time). Von Kleist found that touching the wire resulted in a powerful spark, much more painful than that obtained from an electrostatic machine. The following year, the Dutch physicist Pieter van Musschenbroek invented a similar capacitor, which was named the Leyden jar, after the University of Leiden where he worked. He also was impressed by the power of the shock he received, writing, "I would not take a second shock for the kingdom of France."",
answer the following question. Note that the answer is present within the text.
Question: What did Musschenbroek experience when he invented the Leyden jar? | shock |
Given the following passage
"In October 1745, Ewald Georg von Kleist of Pomerania, Germany, found that charge could be stored by connecting a high-voltage electrostatic generator by a wire to a volume of water in a hand-held glass jar. Von Kleist's hand and the water acted as conductors, and the jar as a dielectric (although details of the mechanism were incorrectly identified at the time). Von Kleist found that touching the wire resulted in a powerful spark, much more painful than that obtained from an electrostatic machine. The following year, the Dutch physicist Pieter van Musschenbroek invented a similar capacitor, which was named the Leyden jar, after the University of Leiden where he worked. He also was impressed by the power of the shock he received, writing, "I would not take a second shock for the kingdom of France."",
answer the following question. Note that the answer is present within the text.
Question: What was the motivation behind inventing the Leyden jar? | charge could be stored |
Given the following passage
"In October 1745, Ewald Georg von Kleist of Pomerania, Germany, found that charge could be stored by connecting a high-voltage electrostatic generator by a wire to a volume of water in a hand-held glass jar. Von Kleist's hand and the water acted as conductors, and the jar as a dielectric (although details of the mechanism were incorrectly identified at the time). Von Kleist found that touching the wire resulted in a powerful spark, much more painful than that obtained from an electrostatic machine. The following year, the Dutch physicist Pieter van Musschenbroek invented a similar capacitor, which was named the Leyden jar, after the University of Leiden where he worked. He also was impressed by the power of the shock he received, writing, "I would not take a second shock for the kingdom of France."",
answer the following question. Note that the answer is present within the text.
Question: How did von Kleist discover that charge could be stored by connecting a high-voltage generator to a volume of water via a wire? | touching the wire |
Given the following passage
"In October 1745, Ewald Georg von Kleist of Pomerania, Germany, found that charge could be stored by connecting a high-voltage electrostatic generator by a wire to a volume of water in a hand-held glass jar. Von Kleist's hand and the water acted as conductors, and the jar as a dielectric (although details of the mechanism were incorrectly identified at the time). Von Kleist found that touching the wire resulted in a powerful spark, much more painful than that obtained from an electrostatic machine. The following year, the Dutch physicist Pieter van Musschenbroek invented a similar capacitor, which was named the Leyden jar, after the University of Leiden where he worked. He also was impressed by the power of the shock he received, writing, "I would not take a second shock for the kingdom of France."",
answer the following question. Note that the answer is present within the text.
Question: Who do we likely have to thank for the initial discovery that led to modern-day capacitors? | Ewald Georg von Kleist |
Given the following passage
"For maximum life, capacitors usually need to be able to handle the maximum amount of reversal that a system will experience. An AC circuit will experience 100% voltage reversal, while under-damped DC circuits will experience less than 100%. Reversal creates excess electric fields in the dielectric, causes excess heating of both the dielectric and the conductors, and can dramatically shorten the life expectancy of the capacitor. Reversal ratings will often affect the design considerations for the capacitor, from the choice of dielectric materials and voltage ratings to the types of internal connections used.",
answer the following question. Note that the answer is present within the text.
Question: What might get 95% voltage reversal? | under-damped DC circuits |
Given the following passage
"For maximum life, capacitors usually need to be able to handle the maximum amount of reversal that a system will experience. An AC circuit will experience 100% voltage reversal, while under-damped DC circuits will experience less than 100%. Reversal creates excess electric fields in the dielectric, causes excess heating of both the dielectric and the conductors, and can dramatically shorten the life expectancy of the capacitor. Reversal ratings will often affect the design considerations for the capacitor, from the choice of dielectric materials and voltage ratings to the types of internal connections used.",
answer the following question. Note that the answer is present within the text.
Question: What might get 50% voltage reversal? | under-damped DC circuits |
Given the following passage
"Last but not least the electric double-layer capacitor (now Supercapacitors) were invented. In 1957 H. Becker developed a "Low voltage electrolytic capacitor with porous carbon electrodes". He believed that the energy was stored as a charge in the carbon pores used in his capacitor as in the pores of the etched foils of electrolytic capacitors. Because the double layer mechanism was not known by him at the time, he wrote in the patent: "It is not known exactly what is taking place in the component if it is used for energy storage, but it leads to an extremely high capacity.".",
answer the following question. Note that the answer is present within the text.
Question: What gives the Supercapacitors their advantage? | electric double-layer |
Given the following passage
"Last but not least the electric double-layer capacitor (now Supercapacitors) were invented. In 1957 H. Becker developed a "Low voltage electrolytic capacitor with porous carbon electrodes". He believed that the energy was stored as a charge in the carbon pores used in his capacitor as in the pores of the etched foils of electrolytic capacitors. Because the double layer mechanism was not known by him at the time, he wrote in the patent: "It is not known exactly what is taking place in the component if it is used for energy storage, but it leads to an extremely high capacity.".",
answer the following question. Note that the answer is present within the text.
Question: What did the supercapacitors improve? | electrolytic capacitor |
Given the following passage
"Last but not least the electric double-layer capacitor (now Supercapacitors) were invented. In 1957 H. Becker developed a "Low voltage electrolytic capacitor with porous carbon electrodes". He believed that the energy was stored as a charge in the carbon pores used in his capacitor as in the pores of the etched foils of electrolytic capacitors. Because the double layer mechanism was not known by him at the time, he wrote in the patent: "It is not known exactly what is taking place in the component if it is used for energy storage, but it leads to an extremely high capacity.".",
answer the following question. Note that the answer is present within the text.
Question: What is the purpose of the supercapacitors? | energy storage |
Given the following passage
"Last but not least the electric double-layer capacitor (now Supercapacitors) were invented. In 1957 H. Becker developed a "Low voltage electrolytic capacitor with porous carbon electrodes". He believed that the energy was stored as a charge in the carbon pores used in his capacitor as in the pores of the etched foils of electrolytic capacitors. Because the double layer mechanism was not known by him at the time, he wrote in the patent: "It is not known exactly what is taking place in the component if it is used for energy storage, but it leads to an extremely high capacity.".",
answer the following question. Note that the answer is present within the text.
Question: How do supercapacitors store energy? | the double layer mechanism |
Given the following passage
"Last but not least the electric double-layer capacitor (now Supercapacitors) were invented. In 1957 H. Becker developed a "Low voltage electrolytic capacitor with porous carbon electrodes". He believed that the energy was stored as a charge in the carbon pores used in his capacitor as in the pores of the etched foils of electrolytic capacitors. Because the double layer mechanism was not known by him at the time, he wrote in the patent: "It is not known exactly what is taking place in the component if it is used for energy storage, but it leads to an extremely high capacity.".",
answer the following question. Note that the answer is present within the text.
Question: What is one characteristic of the electrodes of the supercapacitor? | porous |
Given the following passage
"The maximum energy is a function of dielectric volume, permittivity, and dielectric strength. Changing the plate area and the separation between the plates while maintaining the same volume causes no change of the maximum amount of energy that the capacitor can store, so long as the distance between plates remains much smaller than both the length and width of the plates. In addition, these equations assume that the electric field is entirely concentrated in the dielectric between the plates. In reality there are fringing fields outside the dielectric, for example between the sides of the capacitor plates, which will increase the effective capacitance of the capacitor. This is sometimes called parasitic capacitance. For some simple capacitor geometries this additional capacitance term can be calculated analytically. It becomes negligibly small when the ratios of plate width to separation and length to separation are large.",
answer the following question. Note that the answer is present within the text.
Question: Where is energy stored? | capacitor |
Given the following passage
"The maximum energy is a function of dielectric volume, permittivity, and dielectric strength. Changing the plate area and the separation between the plates while maintaining the same volume causes no change of the maximum amount of energy that the capacitor can store, so long as the distance between plates remains much smaller than both the length and width of the plates. In addition, these equations assume that the electric field is entirely concentrated in the dielectric between the plates. In reality there are fringing fields outside the dielectric, for example between the sides of the capacitor plates, which will increase the effective capacitance of the capacitor. This is sometimes called parasitic capacitance. For some simple capacitor geometries this additional capacitance term can be calculated analytically. It becomes negligibly small when the ratios of plate width to separation and length to separation are large.",
answer the following question. Note that the answer is present within the text.
Question: What is a part of capacitor? | plates |
Given the following passage
"The maximum energy is a function of dielectric volume, permittivity, and dielectric strength. Changing the plate area and the separation between the plates while maintaining the same volume causes no change of the maximum amount of energy that the capacitor can store, so long as the distance between plates remains much smaller than both the length and width of the plates. In addition, these equations assume that the electric field is entirely concentrated in the dielectric between the plates. In reality there are fringing fields outside the dielectric, for example between the sides of the capacitor plates, which will increase the effective capacitance of the capacitor. This is sometimes called parasitic capacitance. For some simple capacitor geometries this additional capacitance term can be calculated analytically. It becomes negligibly small when the ratios of plate width to separation and length to separation are large.",
answer the following question. Note that the answer is present within the text.
Question: What is one characteristic of capacitor? | effective capacitance |
Given the following passage
"The maximum energy is a function of dielectric volume, permittivity, and dielectric strength. Changing the plate area and the separation between the plates while maintaining the same volume causes no change of the maximum amount of energy that the capacitor can store, so long as the distance between plates remains much smaller than both the length and width of the plates. In addition, these equations assume that the electric field is entirely concentrated in the dielectric between the plates. In reality there are fringing fields outside the dielectric, for example between the sides of the capacitor plates, which will increase the effective capacitance of the capacitor. This is sometimes called parasitic capacitance. For some simple capacitor geometries this additional capacitance term can be calculated analytically. It becomes negligibly small when the ratios of plate width to separation and length to separation are large.",
answer the following question. Note that the answer is present within the text.
Question: What is parasitic capacitance charateristic of? | capacitor |
Given the following passage
"The maximum energy is a function of dielectric volume, permittivity, and dielectric strength. Changing the plate area and the separation between the plates while maintaining the same volume causes no change of the maximum amount of energy that the capacitor can store, so long as the distance between plates remains much smaller than both the length and width of the plates. In addition, these equations assume that the electric field is entirely concentrated in the dielectric between the plates. In reality there are fringing fields outside the dielectric, for example between the sides of the capacitor plates, which will increase the effective capacitance of the capacitor. This is sometimes called parasitic capacitance. For some simple capacitor geometries this additional capacitance term can be calculated analytically. It becomes negligibly small when the ratios of plate width to separation and length to separation are large.",
answer the following question. Note that the answer is present within the text.
Question: What influence the parasitic capacitance? | ratios of plate width to separation and length to separation |
Given the following passage
"Charles Pollak (born Karol Pollak), the inventor of the first electrolytic capacitors, found out that the oxide layer on an aluminum anode remained stable in a neutral or alkaline electrolyte, even when the power was switched off. In 1896 he filed a patent for an "Electric liquid capacitor with aluminum electrodes." Solid electrolyte tantalum capacitors were invented by Bell Laboratories in the early 1950s as a miniaturized and more reliable low-voltage support capacitor to complement their newly invented transistor.",
answer the following question. Note that the answer is present within the text.
Question: What had Pollak changed his name to? | Charles |
Given the following passage
"Charles Pollak (born Karol Pollak), the inventor of the first electrolytic capacitors, found out that the oxide layer on an aluminum anode remained stable in a neutral or alkaline electrolyte, even when the power was switched off. In 1896 he filed a patent for an "Electric liquid capacitor with aluminum electrodes." Solid electrolyte tantalum capacitors were invented by Bell Laboratories in the early 1950s as a miniaturized and more reliable low-voltage support capacitor to complement their newly invented transistor.",
answer the following question. Note that the answer is present within the text.
Question: Pollak's parents gave him which name? | Karol |
Given the following passage
"Charles Pollak (born Karol Pollak), the inventor of the first electrolytic capacitors, found out that the oxide layer on an aluminum anode remained stable in a neutral or alkaline electrolyte, even when the power was switched off. In 1896 he filed a patent for an "Electric liquid capacitor with aluminum electrodes." Solid electrolyte tantalum capacitors were invented by Bell Laboratories in the early 1950s as a miniaturized and more reliable low-voltage support capacitor to complement their newly invented transistor.",
answer the following question. Note that the answer is present within the text.
Question: Who added on to the progress of capacitors? | Bell Laboratories |
Given the following passage
"Charles Pollak (born Karol Pollak), the inventor of the first electrolytic capacitors, found out that the oxide layer on an aluminum anode remained stable in a neutral or alkaline electrolyte, even when the power was switched off. In 1896 he filed a patent for an "Electric liquid capacitor with aluminum electrodes." Solid electrolyte tantalum capacitors were invented by Bell Laboratories in the early 1950s as a miniaturized and more reliable low-voltage support capacitor to complement their newly invented transistor.",
answer the following question. Note that the answer is present within the text.
Question: What makes Bell's invention different from Pollak's? | tantalum |
Given the following passage
"Charles Pollak (born Karol Pollak), the inventor of the first electrolytic capacitors, found out that the oxide layer on an aluminum anode remained stable in a neutral or alkaline electrolyte, even when the power was switched off. In 1896 he filed a patent for an "Electric liquid capacitor with aluminum electrodes." Solid electrolyte tantalum capacitors were invented by Bell Laboratories in the early 1950s as a miniaturized and more reliable low-voltage support capacitor to complement their newly invented transistor.",
answer the following question. Note that the answer is present within the text.
Question: Who was responsible for a capacitor that people could better rely on? | Bell Laboratories |
Given the following passage
"where a single prime denotes the real part and a double prime the imaginary part, Z(ω) is the complex impedance with the dielectric present, Ccmplx(ω) is the so-called complex capacitance with the dielectric present, and C0 is the capacitance without the dielectric. (Measurement "without the dielectric" in principle means measurement in free space, an unattainable goal inasmuch as even the quantum vacuum is predicted to exhibit nonideal behavior, such as dichroism. For practical purposes, when measurement errors are taken into account, often a measurement in terrestrial vacuum, or simply a calculation of C0, is sufficiently accurate.)",
answer the following question. Note that the answer is present within the text.
Question: What is less than double? | single |
Given the following passage
"where a single prime denotes the real part and a double prime the imaginary part, Z(ω) is the complex impedance with the dielectric present, Ccmplx(ω) is the so-called complex capacitance with the dielectric present, and C0 is the capacitance without the dielectric. (Measurement "without the dielectric" in principle means measurement in free space, an unattainable goal inasmuch as even the quantum vacuum is predicted to exhibit nonideal behavior, such as dichroism. For practical purposes, when measurement errors are taken into account, often a measurement in terrestrial vacuum, or simply a calculation of C0, is sufficiently accurate.)",
answer the following question. Note that the answer is present within the text.
Question: What kind of friend do some kids have that are not real or seen? | imaginary |
Given the following passage
"where a single prime denotes the real part and a double prime the imaginary part, Z(ω) is the complex impedance with the dielectric present, Ccmplx(ω) is the so-called complex capacitance with the dielectric present, and C0 is the capacitance without the dielectric. (Measurement "without the dielectric" in principle means measurement in free space, an unattainable goal inasmuch as even the quantum vacuum is predicted to exhibit nonideal behavior, such as dichroism. For practical purposes, when measurement errors are taken into account, often a measurement in terrestrial vacuum, or simply a calculation of C0, is sufficiently accurate.)",
answer the following question. Note that the answer is present within the text.
Question: What is another word for gift? | present |
Given the following passage
"Most types of capacitor include a dielectric spacer, which increases their capacitance. These dielectrics are most often insulators. However, low capacitance devices are available with a vacuum between their plates, which allows extremely high voltage operation and low losses. Variable capacitors with their plates open to the atmosphere were commonly used in radio tuning circuits. Later designs use polymer foil dielectric between the moving and stationary plates, with no significant air space between them.",
answer the following question. Note that the answer is present within the text.
Question: WHat is opposite of least? | Most |
Given the following passage
"Most types of capacitor include a dielectric spacer, which increases their capacitance. These dielectrics are most often insulators. However, low capacitance devices are available with a vacuum between their plates, which allows extremely high voltage operation and low losses. Variable capacitors with their plates open to the atmosphere were commonly used in radio tuning circuits. Later designs use polymer foil dielectric between the moving and stationary plates, with no significant air space between them.",
answer the following question. Note that the answer is present within the text.
Question: What is opposite of exclude? | include |
Given the following passage
"Most types of capacitor include a dielectric spacer, which increases their capacitance. These dielectrics are most often insulators. However, low capacitance devices are available with a vacuum between their plates, which allows extremely high voltage operation and low losses. Variable capacitors with their plates open to the atmosphere were commonly used in radio tuning circuits. Later designs use polymer foil dielectric between the moving and stationary plates, with no significant air space between them.",
answer the following question. Note that the answer is present within the text.
Question: What is opposite of high? | low |
Given the following passage
"The ancient history of Kathmandu is described in its traditional myths and legends. According to Swayambhu Purana, present-day Kathmandu was once a huge and deep lake names "Nagdaha" as it was full of snakes. The lake was cut drained by Bodhisatwa Manjusri with his sword and the water was evacuated out from there and he established a city called Manjupattan and made Dharmakar the ruler of the valley land. After sometimes, a demon named Banasur closed the outlet and the valley was again a lake. Then lots Krishna came to Nepal, killed Banasur and again drained out water. He has brought some Gops with him and made Bhuktaman the king of Nepal.",
answer the following question. Note that the answer is present within the text.
Question: Who is the last ruler of Nepal mentioned here? | Bhuktaman |
Given the following passage
"The ancient history of Kathmandu is described in its traditional myths and legends. According to Swayambhu Purana, present-day Kathmandu was once a huge and deep lake names "Nagdaha" as it was full of snakes. The lake was cut drained by Bodhisatwa Manjusri with his sword and the water was evacuated out from there and he established a city called Manjupattan and made Dharmakar the ruler of the valley land. After sometimes, a demon named Banasur closed the outlet and the valley was again a lake. Then lots Krishna came to Nepal, killed Banasur and again drained out water. He has brought some Gops with him and made Bhuktaman the king of Nepal.",
answer the following question. Note that the answer is present within the text.
Question: What was transformed into a lake by a demon? | the valley |
Given the following passage
"The ancient history of Kathmandu is described in its traditional myths and legends. According to Swayambhu Purana, present-day Kathmandu was once a huge and deep lake names "Nagdaha" as it was full of snakes. The lake was cut drained by Bodhisatwa Manjusri with his sword and the water was evacuated out from there and he established a city called Manjupattan and made Dharmakar the ruler of the valley land. After sometimes, a demon named Banasur closed the outlet and the valley was again a lake. Then lots Krishna came to Nepal, killed Banasur and again drained out water. He has brought some Gops with him and made Bhuktaman the king of Nepal.",
answer the following question. Note that the answer is present within the text.
Question: What kind of text is the account of Kathmandu? | myths and legends |
Given the following passage
"The ancient history of Kathmandu is described in its traditional myths and legends. According to Swayambhu Purana, present-day Kathmandu was once a huge and deep lake names "Nagdaha" as it was full of snakes. The lake was cut drained by Bodhisatwa Manjusri with his sword and the water was evacuated out from there and he established a city called Manjupattan and made Dharmakar the ruler of the valley land. After sometimes, a demon named Banasur closed the outlet and the valley was again a lake. Then lots Krishna came to Nepal, killed Banasur and again drained out water. He has brought some Gops with him and made Bhuktaman the king of Nepal.",
answer the following question. Note that the answer is present within the text.
Question: Which word used in singular has nowadays the meaning of Grand Old Party? | Gops |
Given the following passage
"The ancient history of Kathmandu is described in its traditional myths and legends. According to Swayambhu Purana, present-day Kathmandu was once a huge and deep lake names "Nagdaha" as it was full of snakes. The lake was cut drained by Bodhisatwa Manjusri with his sword and the water was evacuated out from there and he established a city called Manjupattan and made Dharmakar the ruler of the valley land. After sometimes, a demon named Banasur closed the outlet and the valley was again a lake. Then lots Krishna came to Nepal, killed Banasur and again drained out water. He has brought some Gops with him and made Bhuktaman the king of Nepal.",
answer the following question. Note that the answer is present within the text.
Question: Who was the one who determined the ruler of Nepal? | Krishna |
Given the following passage
"Kathmandu is home to Nepali cinema and theaters. The city contains several theaters, including the National Dance Theatre in Kanti Path, the Ganga Theatre, the Himalayan Theatre and the Aarohan Theater Group founded in 1982. The M. Art Theater is based in the city. The Gurukul School of Theatre organizes the Kathmandu International Theater Festival, attracting artists from all over the world. A mini theater is also located at the Hanumandhoka Durbar Square, established by the Durbar Conservation and Promotion Committee.",
answer the following question. Note that the answer is present within the text.
Question: Name one theatre in Kathmandu that specializes in something other than cinema. | the National Dance Theatre in Kanti Path |
Given the following passage
"Kathmandu is home to Nepali cinema and theaters. The city contains several theaters, including the National Dance Theatre in Kanti Path, the Ganga Theatre, the Himalayan Theatre and the Aarohan Theater Group founded in 1982. The M. Art Theater is based in the city. The Gurukul School of Theatre organizes the Kathmandu International Theater Festival, attracting artists from all over the world. A mini theater is also located at the Hanumandhoka Durbar Square, established by the Durbar Conservation and Promotion Committee.",
answer the following question. Note that the answer is present within the text.
Question: Name one theater in Kathmandu that does not specialize in dance. | The M. Art Theater |
Given the following passage
"Institute of Medicine, the central college of Tribhuwan University is the first medical college of Nepal and is located in Maharajgunj, Kathmandu. It was established in 1972 and started to impart medical education from 1978. A number of medical colleges including Kathmandu Medical College, Nepal Medical College, KIST Medical College, Nepal Army Institute of Health Sciences, National Academy of Medical Sciences (NAMS) and Kathmandu University School of Medical Sciences (KUSMS), are also located in or around Kathmandu.",
answer the following question. Note that the answer is present within the text.
Question: Where can you study medicine in Nepal? | Institute of Medicine |
Given the following passage
"Institute of Medicine, the central college of Tribhuwan University is the first medical college of Nepal and is located in Maharajgunj, Kathmandu. It was established in 1972 and started to impart medical education from 1978. A number of medical colleges including Kathmandu Medical College, Nepal Medical College, KIST Medical College, Nepal Army Institute of Health Sciences, National Academy of Medical Sciences (NAMS) and Kathmandu University School of Medical Sciences (KUSMS), are also located in or around Kathmandu.",
answer the following question. Note that the answer is present within the text.
Question: What is Kathmandu Medical College? | medical colleges |
Given the following passage
"Institute of Medicine, the central college of Tribhuwan University is the first medical college of Nepal and is located in Maharajgunj, Kathmandu. It was established in 1972 and started to impart medical education from 1978. A number of medical colleges including Kathmandu Medical College, Nepal Medical College, KIST Medical College, Nepal Army Institute of Health Sciences, National Academy of Medical Sciences (NAMS) and Kathmandu University School of Medical Sciences (KUSMS), are also located in or around Kathmandu.",
answer the following question. Note that the answer is present within the text.
Question: What is KUSMS? | medical colleges |
Given the following passage
"Institute of Medicine, the central college of Tribhuwan University is the first medical college of Nepal and is located in Maharajgunj, Kathmandu. It was established in 1972 and started to impart medical education from 1978. A number of medical colleges including Kathmandu Medical College, Nepal Medical College, KIST Medical College, Nepal Army Institute of Health Sciences, National Academy of Medical Sciences (NAMS) and Kathmandu University School of Medical Sciences (KUSMS), are also located in or around Kathmandu.",
answer the following question. Note that the answer is present within the text.
Question: What is Kathmandu University School of Medical Sciences? | medical colleges |
Given the following passage
"Institute of Medicine, the central college of Tribhuwan University is the first medical college of Nepal and is located in Maharajgunj, Kathmandu. It was established in 1972 and started to impart medical education from 1978. A number of medical colleges including Kathmandu Medical College, Nepal Medical College, KIST Medical College, Nepal Army Institute of Health Sciences, National Academy of Medical Sciences (NAMS) and Kathmandu University School of Medical Sciences (KUSMS), are also located in or around Kathmandu.",
answer the following question. Note that the answer is present within the text.
Question: What is Nepal Army Institute of Health Sciences? | medical colleges |
Given the following passage
"Sikhism is practiced primarily in Gurudwara at Kupundole. An earlier temple of Sikhism is also present in Kathmandu which is now defunct. Jainism is practiced by a small community. A Jain temple is present in Gyaneshwar, where Jains practice their faith. According to the records of the Spiritual Assembly of the Baha'is of Nepal, there are approximately 300 Baha'is in Kathmandu valley. They have a National Office located in Shantinagar, Baneshwor. The Baha'is also have classes for children at the National Centre and other localities in Kathmandu. Islam is practised in Kathmandu but Muslims are a minority, accounting for about 4.2% of the population of Nepal.[citation needed] It is said that in Kathmandu alone there are 170 Christian churches. Christian missionary hospitals, welfare organizations, and schools are also operating. Nepali citizens who served as soldiers in Indian and British armies, who had converted to Christianity while in service, on return to Nepal continue to practice their religion. They have contributed to the spread of Christianity and the building of churches in Nepal and in Kathmandu, in particular.",
answer the following question. Note that the answer is present within the text.
Question: What monotheistic religion is practiced heavily in Nepal? | Christian |
Given the following passage
"Sikhism is practiced primarily in Gurudwara at Kupundole. An earlier temple of Sikhism is also present in Kathmandu which is now defunct. Jainism is practiced by a small community. A Jain temple is present in Gyaneshwar, where Jains practice their faith. According to the records of the Spiritual Assembly of the Baha'is of Nepal, there are approximately 300 Baha'is in Kathmandu valley. They have a National Office located in Shantinagar, Baneshwor. The Baha'is also have classes for children at the National Centre and other localities in Kathmandu. Islam is practised in Kathmandu but Muslims are a minority, accounting for about 4.2% of the population of Nepal.[citation needed] It is said that in Kathmandu alone there are 170 Christian churches. Christian missionary hospitals, welfare organizations, and schools are also operating. Nepali citizens who served as soldiers in Indian and British armies, who had converted to Christianity while in service, on return to Nepal continue to practice their religion. They have contributed to the spread of Christianity and the building of churches in Nepal and in Kathmandu, in particular.",
answer the following question. Note that the answer is present within the text.
Question: Which religion has the least adherents in Kathmandu? | Baha'is |
Given the following passage
"Sikhism is practiced primarily in Gurudwara at Kupundole. An earlier temple of Sikhism is also present in Kathmandu which is now defunct. Jainism is practiced by a small community. A Jain temple is present in Gyaneshwar, where Jains practice their faith. According to the records of the Spiritual Assembly of the Baha'is of Nepal, there are approximately 300 Baha'is in Kathmandu valley. They have a National Office located in Shantinagar, Baneshwor. The Baha'is also have classes for children at the National Centre and other localities in Kathmandu. Islam is practised in Kathmandu but Muslims are a minority, accounting for about 4.2% of the population of Nepal.[citation needed] It is said that in Kathmandu alone there are 170 Christian churches. Christian missionary hospitals, welfare organizations, and schools are also operating. Nepali citizens who served as soldiers in Indian and British armies, who had converted to Christianity while in service, on return to Nepal continue to practice their religion. They have contributed to the spread of Christianity and the building of churches in Nepal and in Kathmandu, in particular.",
answer the following question. Note that the answer is present within the text.
Question: Which group serves children? | Baha'is |
Given the following passage
"Sikhism is practiced primarily in Gurudwara at Kupundole. An earlier temple of Sikhism is also present in Kathmandu which is now defunct. Jainism is practiced by a small community. A Jain temple is present in Gyaneshwar, where Jains practice their faith. According to the records of the Spiritual Assembly of the Baha'is of Nepal, there are approximately 300 Baha'is in Kathmandu valley. They have a National Office located in Shantinagar, Baneshwor. The Baha'is also have classes for children at the National Centre and other localities in Kathmandu. Islam is practised in Kathmandu but Muslims are a minority, accounting for about 4.2% of the population of Nepal.[citation needed] It is said that in Kathmandu alone there are 170 Christian churches. Christian missionary hospitals, welfare organizations, and schools are also operating. Nepali citizens who served as soldiers in Indian and British armies, who had converted to Christianity while in service, on return to Nepal continue to practice their religion. They have contributed to the spread of Christianity and the building of churches in Nepal and in Kathmandu, in particular.",
answer the following question. Note that the answer is present within the text.
Question: Which group has done much to serve Kathmandu? | Christianity |
Given the following passage
"Sikhism is practiced primarily in Gurudwara at Kupundole. An earlier temple of Sikhism is also present in Kathmandu which is now defunct. Jainism is practiced by a small community. A Jain temple is present in Gyaneshwar, where Jains practice their faith. According to the records of the Spiritual Assembly of the Baha'is of Nepal, there are approximately 300 Baha'is in Kathmandu valley. They have a National Office located in Shantinagar, Baneshwor. The Baha'is also have classes for children at the National Centre and other localities in Kathmandu. Islam is practised in Kathmandu but Muslims are a minority, accounting for about 4.2% of the population of Nepal.[citation needed] It is said that in Kathmandu alone there are 170 Christian churches. Christian missionary hospitals, welfare organizations, and schools are also operating. Nepali citizens who served as soldiers in Indian and British armies, who had converted to Christianity while in service, on return to Nepal continue to practice their religion. They have contributed to the spread of Christianity and the building of churches in Nepal and in Kathmandu, in particular.",
answer the following question. Note that the answer is present within the text.
Question: Where do Sikh's worship? | temple |
Given the following passage
"Kathmandu is a center for art in Nepal, displaying the work of contemporary artists in the country and also collections of historical artists. Patan in particular is an ancient city noted for its fine arts and crafts. Art in Kathmandu is vibrant, demonstrating a fusion of traditionalism and modern art, derived from a great number of national, Asian, and global influences. Nepali art is commonly divided into two areas: the idealistic traditional painting known as Paubhas in Nepal and perhaps more commonly known as Thangkas in Tibet, closely linked to the country's religious history and on the other hand the contemporary western-style painting, including nature-based compositions or abstract artwork based on Tantric elements and social themes of which painters in Nepal are well noted for. Internationally, the British-based charity, the Kathmandu Contemporary Art Centre is involved with promoting arts in Kathmandu.",
answer the following question. Note that the answer is present within the text.
Question: What kind of artists are shown in Kathmandu? | contemporary artists in the country and also collections of historical artists |
Given the following passage
"Kathmandu is a center for art in Nepal, displaying the work of contemporary artists in the country and also collections of historical artists. Patan in particular is an ancient city noted for its fine arts and crafts. Art in Kathmandu is vibrant, demonstrating a fusion of traditionalism and modern art, derived from a great number of national, Asian, and global influences. Nepali art is commonly divided into two areas: the idealistic traditional painting known as Paubhas in Nepal and perhaps more commonly known as Thangkas in Tibet, closely linked to the country's religious history and on the other hand the contemporary western-style painting, including nature-based compositions or abstract artwork based on Tantric elements and social themes of which painters in Nepal are well noted for. Internationally, the British-based charity, the Kathmandu Contemporary Art Centre is involved with promoting arts in Kathmandu.",
answer the following question. Note that the answer is present within the text.
Question: What kind of older art can you find in Kathmandu of Nepal? | traditionalism |
Given the following passage
"Kathmandu is a center for art in Nepal, displaying the work of contemporary artists in the country and also collections of historical artists. Patan in particular is an ancient city noted for its fine arts and crafts. Art in Kathmandu is vibrant, demonstrating a fusion of traditionalism and modern art, derived from a great number of national, Asian, and global influences. Nepali art is commonly divided into two areas: the idealistic traditional painting known as Paubhas in Nepal and perhaps more commonly known as Thangkas in Tibet, closely linked to the country's religious history and on the other hand the contemporary western-style painting, including nature-based compositions or abstract artwork based on Tantric elements and social themes of which painters in Nepal are well noted for. Internationally, the British-based charity, the Kathmandu Contemporary Art Centre is involved with promoting arts in Kathmandu.",
answer the following question. Note that the answer is present within the text.
Question: Where do they get the art pieces that are in the center for art in Nepal? | national, Asian, and global influences |
Given the following passage
"With the opening of the tourist industry after the change in the political scenario of Nepal in 1950, the hotel industry drastically improved. Now Kathmandu boasts several luxury such as the Hyatt Regency, Dwarika's, theYak & Yeti, The Everest Hotel, Hotel Radisson, Hotel De L'Annapurna, The Malla Hotel, Shangri-La Hotel (which is not operated by the Shangri-La Hotel Group) and The Shanker Hotel. There are several four-star hotels such as Hotel Vaishali, Hotel Narayani, The Blue Star and Grand Hotel. The Garden Hotel, Hotel Ambassador, and Aloha Inn are among the three-star hotels in Kathmandu. Hotels like Hyatt Regency, De L'Annapurna and Hotel Yak & Yeti are among the five-star hotels providing casinos as well.",
answer the following question. Note that the answer is present within the text.
Question: What are some of the hotels in Nepal that come after the luxury hotels? | Hotel Vaishali, Hotel Narayani, The Blue Star and Grand Hotel |
Given the following passage
"With the opening of the tourist industry after the change in the political scenario of Nepal in 1950, the hotel industry drastically improved. Now Kathmandu boasts several luxury such as the Hyatt Regency, Dwarika's, theYak & Yeti, The Everest Hotel, Hotel Radisson, Hotel De L'Annapurna, The Malla Hotel, Shangri-La Hotel (which is not operated by the Shangri-La Hotel Group) and The Shanker Hotel. There are several four-star hotels such as Hotel Vaishali, Hotel Narayani, The Blue Star and Grand Hotel. The Garden Hotel, Hotel Ambassador, and Aloha Inn are among the three-star hotels in Kathmandu. Hotels like Hyatt Regency, De L'Annapurna and Hotel Yak & Yeti are among the five-star hotels providing casinos as well.",
answer the following question. Note that the answer is present within the text.
Question: What high end hotels were opened as a result of the political scenario in Nepal dating back to 1950? | Hyatt Regency, Dwarika's, theYak & Yeti, The Everest Hotel, Hotel Radisson, Hotel De L'Annapurna, The Malla Hotel, Shangri-La Hotel (which is not operated by the Shangri-La Hotel Group) and The Shanker Hotel |
Given the following passage
"With the opening of the tourist industry after the change in the political scenario of Nepal in 1950, the hotel industry drastically improved. Now Kathmandu boasts several luxury such as the Hyatt Regency, Dwarika's, theYak & Yeti, The Everest Hotel, Hotel Radisson, Hotel De L'Annapurna, The Malla Hotel, Shangri-La Hotel (which is not operated by the Shangri-La Hotel Group) and The Shanker Hotel. There are several four-star hotels such as Hotel Vaishali, Hotel Narayani, The Blue Star and Grand Hotel. The Garden Hotel, Hotel Ambassador, and Aloha Inn are among the three-star hotels in Kathmandu. Hotels like Hyatt Regency, De L'Annapurna and Hotel Yak & Yeti are among the five-star hotels providing casinos as well.",
answer the following question. Note that the answer is present within the text.
Question: What hotels with average amenities were opened in Nepal after the political scenario in 1950? | The Garden Hotel, Hotel Ambassador, and Aloha Inn |
Given the following passage
"Most of the cuisines found in Kathmandu are non-vegetarian. However, the practice of vegetarianism is not uncommon, and vegetarian cuisines can be found throughout the city. Consumption of beef is very uncommon and considered taboo in many places. Buff (meat of water buffalo) is very common. There is a strong tradition of buff consumption in Kathmandu, especially among Newars, which is not found in other parts of Nepal. Consumption of pork was considered taboo until a few decades ago. Due to the intermixing with Kirat cuisine from eastern Nepal, pork has found a place in Kathmandu dishes. A fringe population of devout Hindus and Muslims consider it taboo. The Muslims forbid eating buff as from Quran while Hindus eat all varieties except Cow's meat as the consider Cow to be a goddess and symbol of purity. The chief breakfast for locals and visitors is mostly Momo or Chowmein.",
answer the following question. Note that the answer is present within the text.
Question: Who will not eat pork under any circumstances? | fringe population of devout Hindus and Muslims |
Given the following passage
"Most of the cuisines found in Kathmandu are non-vegetarian. However, the practice of vegetarianism is not uncommon, and vegetarian cuisines can be found throughout the city. Consumption of beef is very uncommon and considered taboo in many places. Buff (meat of water buffalo) is very common. There is a strong tradition of buff consumption in Kathmandu, especially among Newars, which is not found in other parts of Nepal. Consumption of pork was considered taboo until a few decades ago. Due to the intermixing with Kirat cuisine from eastern Nepal, pork has found a place in Kathmandu dishes. A fringe population of devout Hindus and Muslims consider it taboo. The Muslims forbid eating buff as from Quran while Hindus eat all varieties except Cow's meat as the consider Cow to be a goddess and symbol of purity. The chief breakfast for locals and visitors is mostly Momo or Chowmein.",
answer the following question. Note that the answer is present within the text.
Question: What do Muslims feel about cows? | consider Cow to be a goddess and symbol of purity |
Given the following passage
"Most of the cuisines found in Kathmandu are non-vegetarian. However, the practice of vegetarianism is not uncommon, and vegetarian cuisines can be found throughout the city. Consumption of beef is very uncommon and considered taboo in many places. Buff (meat of water buffalo) is very common. There is a strong tradition of buff consumption in Kathmandu, especially among Newars, which is not found in other parts of Nepal. Consumption of pork was considered taboo until a few decades ago. Due to the intermixing with Kirat cuisine from eastern Nepal, pork has found a place in Kathmandu dishes. A fringe population of devout Hindus and Muslims consider it taboo. The Muslims forbid eating buff as from Quran while Hindus eat all varieties except Cow's meat as the consider Cow to be a goddess and symbol of purity. The chief breakfast for locals and visitors is mostly Momo or Chowmein.",
answer the following question. Note that the answer is present within the text.
Question: What might a person eat in the morning in Kathmandu? | Momo or Chowmein |
Given the following passage
"Most of the cuisines found in Kathmandu are non-vegetarian. However, the practice of vegetarianism is not uncommon, and vegetarian cuisines can be found throughout the city. Consumption of beef is very uncommon and considered taboo in many places. Buff (meat of water buffalo) is very common. There is a strong tradition of buff consumption in Kathmandu, especially among Newars, which is not found in other parts of Nepal. Consumption of pork was considered taboo until a few decades ago. Due to the intermixing with Kirat cuisine from eastern Nepal, pork has found a place in Kathmandu dishes. A fringe population of devout Hindus and Muslims consider it taboo. The Muslims forbid eating buff as from Quran while Hindus eat all varieties except Cow's meat as the consider Cow to be a goddess and symbol of purity. The chief breakfast for locals and visitors is mostly Momo or Chowmein.",
answer the following question. Note that the answer is present within the text.
Question: What cuisine is not known for pork dishes: Kirat or Newars? | Newars |
Given the following passage
"Most of the cuisines found in Kathmandu are non-vegetarian. However, the practice of vegetarianism is not uncommon, and vegetarian cuisines can be found throughout the city. Consumption of beef is very uncommon and considered taboo in many places. Buff (meat of water buffalo) is very common. There is a strong tradition of buff consumption in Kathmandu, especially among Newars, which is not found in other parts of Nepal. Consumption of pork was considered taboo until a few decades ago. Due to the intermixing with Kirat cuisine from eastern Nepal, pork has found a place in Kathmandu dishes. A fringe population of devout Hindus and Muslims consider it taboo. The Muslims forbid eating buff as from Quran while Hindus eat all varieties except Cow's meat as the consider Cow to be a goddess and symbol of purity. The chief breakfast for locals and visitors is mostly Momo or Chowmein.",
answer the following question. Note that the answer is present within the text.
Question: What is found to be common among the citizens? | practice of vegetarianism |
Given the following passage
"The city generally has a climate with warm days followed by cool nights and mornings. Unpredictable weather is expected, given that temperatures can drop to 1 °C (34 °F) or less during the winter. During a 2013 cold front, the winter temperatures of Kathmandu dropped to −4 °C (25 °F), and the lowest temperature was recorded on January 10, 2013, at −9.2 °C (15.4 °F). Rainfall is mostly monsoon-based (about 65% of the total concentrated during the monsoon months of June to August), and decreases substantially (100 to 200 cm (39 to 79 in)) from eastern Nepal to western Nepal. Rainfall has been recorded at about 1,400 millimetres (55.1 in) for the Kathmandu valley, and averages 1,407 millimetres (55.4 in) for the city of Kathmandu. On average humidity is 75%. The chart below is based on data from the Nepal Bureau of Standards & Meteorology, "Weather Meteorology" for 2005. The chart provides minimum and maximum temperatures during each month. The annual amount of precipitation was 1,124 millimetres (44.3 in) for 2005, as per monthly data included in the table above. The decade of 2000-2010 saw highly variable and unprecedented precipitation anomalies in Kathmandu. This was mostly due to the annual variation of the southwest monsoon.[citation needed] For example, 2003 was the wettest year ever in Kathmandu, totalling over 2,900 mm (114 in) of precipitation due to an exceptionally strong monsoon season. In contrast, 2001 recorded only 356 mm (14 in) of precipitation due to an extraordinarily weak monsoon season.",
answer the following question. Note that the answer is present within the text.
Question: What is most precipation like in Nepal? | monsoon-based |
Given the following passage
"The city generally has a climate with warm days followed by cool nights and mornings. Unpredictable weather is expected, given that temperatures can drop to 1 °C (34 °F) or less during the winter. During a 2013 cold front, the winter temperatures of Kathmandu dropped to −4 °C (25 °F), and the lowest temperature was recorded on January 10, 2013, at −9.2 °C (15.4 °F). Rainfall is mostly monsoon-based (about 65% of the total concentrated during the monsoon months of June to August), and decreases substantially (100 to 200 cm (39 to 79 in)) from eastern Nepal to western Nepal. Rainfall has been recorded at about 1,400 millimetres (55.1 in) for the Kathmandu valley, and averages 1,407 millimetres (55.4 in) for the city of Kathmandu. On average humidity is 75%. The chart below is based on data from the Nepal Bureau of Standards & Meteorology, "Weather Meteorology" for 2005. The chart provides minimum and maximum temperatures during each month. The annual amount of precipitation was 1,124 millimetres (44.3 in) for 2005, as per monthly data included in the table above. The decade of 2000-2010 saw highly variable and unprecedented precipitation anomalies in Kathmandu. This was mostly due to the annual variation of the southwest monsoon.[citation needed] For example, 2003 was the wettest year ever in Kathmandu, totalling over 2,900 mm (114 in) of precipitation due to an exceptionally strong monsoon season. In contrast, 2001 recorded only 356 mm (14 in) of precipitation due to an extraordinarily weak monsoon season.",
answer the following question. Note that the answer is present within the text.
Question: Where would wet days be most likely to occur in Nepal? | monsoon months |
Given the following passage
"The city generally has a climate with warm days followed by cool nights and mornings. Unpredictable weather is expected, given that temperatures can drop to 1 °C (34 °F) or less during the winter. During a 2013 cold front, the winter temperatures of Kathmandu dropped to −4 °C (25 °F), and the lowest temperature was recorded on January 10, 2013, at −9.2 °C (15.4 °F). Rainfall is mostly monsoon-based (about 65% of the total concentrated during the monsoon months of June to August), and decreases substantially (100 to 200 cm (39 to 79 in)) from eastern Nepal to western Nepal. Rainfall has been recorded at about 1,400 millimetres (55.1 in) for the Kathmandu valley, and averages 1,407 millimetres (55.4 in) for the city of Kathmandu. On average humidity is 75%. The chart below is based on data from the Nepal Bureau of Standards & Meteorology, "Weather Meteorology" for 2005. The chart provides minimum and maximum temperatures during each month. The annual amount of precipitation was 1,124 millimetres (44.3 in) for 2005, as per monthly data included in the table above. The decade of 2000-2010 saw highly variable and unprecedented precipitation anomalies in Kathmandu. This was mostly due to the annual variation of the southwest monsoon.[citation needed] For example, 2003 was the wettest year ever in Kathmandu, totalling over 2,900 mm (114 in) of precipitation due to an exceptionally strong monsoon season. In contrast, 2001 recorded only 356 mm (14 in) of precipitation due to an extraordinarily weak monsoon season.",
answer the following question. Note that the answer is present within the text.
Question: What caused more unstable weather than normal in Kathmandu during the first decade of the century? | unprecedented precipitation anomalies in |
Given the following passage
"The city generally has a climate with warm days followed by cool nights and mornings. Unpredictable weather is expected, given that temperatures can drop to 1 °C (34 °F) or less during the winter. During a 2013 cold front, the winter temperatures of Kathmandu dropped to −4 °C (25 °F), and the lowest temperature was recorded on January 10, 2013, at −9.2 °C (15.4 °F). Rainfall is mostly monsoon-based (about 65% of the total concentrated during the monsoon months of June to August), and decreases substantially (100 to 200 cm (39 to 79 in)) from eastern Nepal to western Nepal. Rainfall has been recorded at about 1,400 millimetres (55.1 in) for the Kathmandu valley, and averages 1,407 millimetres (55.4 in) for the city of Kathmandu. On average humidity is 75%. The chart below is based on data from the Nepal Bureau of Standards & Meteorology, "Weather Meteorology" for 2005. The chart provides minimum and maximum temperatures during each month. The annual amount of precipitation was 1,124 millimetres (44.3 in) for 2005, as per monthly data included in the table above. The decade of 2000-2010 saw highly variable and unprecedented precipitation anomalies in Kathmandu. This was mostly due to the annual variation of the southwest monsoon.[citation needed] For example, 2003 was the wettest year ever in Kathmandu, totalling over 2,900 mm (114 in) of precipitation due to an exceptionally strong monsoon season. In contrast, 2001 recorded only 356 mm (14 in) of precipitation due to an extraordinarily weak monsoon season.",
answer the following question. Note that the answer is present within the text.
Question: What caused a dry season in the early 2000's | an extraordinarily weak monsoon season |
Given the following passage
"The city generally has a climate with warm days followed by cool nights and mornings. Unpredictable weather is expected, given that temperatures can drop to 1 °C (34 °F) or less during the winter. During a 2013 cold front, the winter temperatures of Kathmandu dropped to −4 °C (25 °F), and the lowest temperature was recorded on January 10, 2013, at −9.2 °C (15.4 °F). Rainfall is mostly monsoon-based (about 65% of the total concentrated during the monsoon months of June to August), and decreases substantially (100 to 200 cm (39 to 79 in)) from eastern Nepal to western Nepal. Rainfall has been recorded at about 1,400 millimetres (55.1 in) for the Kathmandu valley, and averages 1,407 millimetres (55.4 in) for the city of Kathmandu. On average humidity is 75%. The chart below is based on data from the Nepal Bureau of Standards & Meteorology, "Weather Meteorology" for 2005. The chart provides minimum and maximum temperatures during each month. The annual amount of precipitation was 1,124 millimetres (44.3 in) for 2005, as per monthly data included in the table above. The decade of 2000-2010 saw highly variable and unprecedented precipitation anomalies in Kathmandu. This was mostly due to the annual variation of the southwest monsoon.[citation needed] For example, 2003 was the wettest year ever in Kathmandu, totalling over 2,900 mm (114 in) of precipitation due to an exceptionally strong monsoon season. In contrast, 2001 recorded only 356 mm (14 in) of precipitation due to an extraordinarily weak monsoon season.",
answer the following question. Note that the answer is present within the text.
Question: What happened in Nepal's captial during 2013? | the winter temperatures of Kathmandu dropped to −4 °C (25 °F |
Given the following passage
"Between the 16th century and 19th century, the traditional Armenian homeland composed of Eastern Armenia and Western Armenia came under the rule of the Ottoman and successive Iranian empires, repeatedly ruled by either of the two over the centuries. By the 19th century, Eastern Armenia had been conquered by the Russian Empire, while most of the western parts of the traditional Armenian homeland remained under Ottoman rule. During World War I, Armenians living in their ancestral lands in the Ottoman Empire were systematically exterminated in the Armenian Genocide. In 1918, after the Russian Revolution, all non-Russian countries declared their independence from the Russian empire, leading to the establishment of the First Republic of Armenia. By 1920, the state was incorporated into the Transcaucasian Socialist Federative Soviet Republic, and in 1922 became a founding member of the Soviet Union. In 1936, the Transcaucasian state was dissolved, transforming its constituent states, including the Armenian Soviet Socialist Republic, into full Union republics. The modern Republic of Armenia became independent in 1991 during the dissolution of the Soviet Union.",
answer the following question. Note that the answer is present within the text.
Question: Which came first in Armenia, Ottoman rule or the Armenian Genocide? | Ottoman |
Given the following passage
"Between the 16th century and 19th century, the traditional Armenian homeland composed of Eastern Armenia and Western Armenia came under the rule of the Ottoman and successive Iranian empires, repeatedly ruled by either of the two over the centuries. By the 19th century, Eastern Armenia had been conquered by the Russian Empire, while most of the western parts of the traditional Armenian homeland remained under Ottoman rule. During World War I, Armenians living in their ancestral lands in the Ottoman Empire were systematically exterminated in the Armenian Genocide. In 1918, after the Russian Revolution, all non-Russian countries declared their independence from the Russian empire, leading to the establishment of the First Republic of Armenia. By 1920, the state was incorporated into the Transcaucasian Socialist Federative Soviet Republic, and in 1922 became a founding member of the Soviet Union. In 1936, the Transcaucasian state was dissolved, transforming its constituent states, including the Armenian Soviet Socialist Republic, into full Union republics. The modern Republic of Armenia became independent in 1991 during the dissolution of the Soviet Union.",
answer the following question. Note that the answer is present within the text.
Question: Which came first in Armenia. Iranian rule or the Armenian Genocide? | Iranian |
Given the following passage
"Between the 16th century and 19th century, the traditional Armenian homeland composed of Eastern Armenia and Western Armenia came under the rule of the Ottoman and successive Iranian empires, repeatedly ruled by either of the two over the centuries. By the 19th century, Eastern Armenia had been conquered by the Russian Empire, while most of the western parts of the traditional Armenian homeland remained under Ottoman rule. During World War I, Armenians living in their ancestral lands in the Ottoman Empire were systematically exterminated in the Armenian Genocide. In 1918, after the Russian Revolution, all non-Russian countries declared their independence from the Russian empire, leading to the establishment of the First Republic of Armenia. By 1920, the state was incorporated into the Transcaucasian Socialist Federative Soviet Republic, and in 1922 became a founding member of the Soviet Union. In 1936, the Transcaucasian state was dissolved, transforming its constituent states, including the Armenian Soviet Socialist Republic, into full Union republics. The modern Republic of Armenia became independent in 1991 during the dissolution of the Soviet Union.",
answer the following question. Note that the answer is present within the text.
Question: Which came first in Armenia. Transcaucasian Socialist Federative Soviet Republic or the Armenian Genocide? | Armenian Genocide |
Given the following passage
"Between the 16th century and 19th century, the traditional Armenian homeland composed of Eastern Armenia and Western Armenia came under the rule of the Ottoman and successive Iranian empires, repeatedly ruled by either of the two over the centuries. By the 19th century, Eastern Armenia had been conquered by the Russian Empire, while most of the western parts of the traditional Armenian homeland remained under Ottoman rule. During World War I, Armenians living in their ancestral lands in the Ottoman Empire were systematically exterminated in the Armenian Genocide. In 1918, after the Russian Revolution, all non-Russian countries declared their independence from the Russian empire, leading to the establishment of the First Republic of Armenia. By 1920, the state was incorporated into the Transcaucasian Socialist Federative Soviet Republic, and in 1922 became a founding member of the Soviet Union. In 1936, the Transcaucasian state was dissolved, transforming its constituent states, including the Armenian Soviet Socialist Republic, into full Union republics. The modern Republic of Armenia became independent in 1991 during the dissolution of the Soviet Union.",
answer the following question. Note that the answer is present within the text.
Question: Which came first in Armenia. Armenian Soviet Socialist Republic or the Armenian Genocide? | Armenian Genocide |
Given the following passage
"Between the 16th century and 19th century, the traditional Armenian homeland composed of Eastern Armenia and Western Armenia came under the rule of the Ottoman and successive Iranian empires, repeatedly ruled by either of the two over the centuries. By the 19th century, Eastern Armenia had been conquered by the Russian Empire, while most of the western parts of the traditional Armenian homeland remained under Ottoman rule. During World War I, Armenians living in their ancestral lands in the Ottoman Empire were systematically exterminated in the Armenian Genocide. In 1918, after the Russian Revolution, all non-Russian countries declared their independence from the Russian empire, leading to the establishment of the First Republic of Armenia. By 1920, the state was incorporated into the Transcaucasian Socialist Federative Soviet Republic, and in 1922 became a founding member of the Soviet Union. In 1936, the Transcaucasian state was dissolved, transforming its constituent states, including the Armenian Soviet Socialist Republic, into full Union republics. The modern Republic of Armenia became independent in 1991 during the dissolution of the Soviet Union.",
answer the following question. Note that the answer is present within the text.
Question: Which came first in Armenia. Republic of Armenia or the Armenian Genocide? | Armenian Genocide |
Given the following passage
"Like other newly independent states of the former Soviet Union, Armenia's economy suffers from the breakdown of former Soviet trading patterns. Soviet investment in and support of Armenian industry has virtually disappeared, so that few major enterprises are still able to function. In addition, the effects of the 1988 Spitak earthquake, which killed more than 25,000 people and made 500,000 homeless, are still being felt. The conflict with Azerbaijan over Nagorno-Karabakh has not been resolved. The closure of Azerbaijani and Turkish borders has devastated the economy, because Armenia depends on outside supplies of energy and most raw materials. Land routes through Georgia and Iran are inadequate or unreliable. The GDP fell nearly 60% between 1989 and 1993, but then resumed robust growth. The national currency, the dram, suffered hyperinflation for the first years after its introduction in 1993.",
answer the following question. Note that the answer is present within the text.
Question: What lost value in Armenia's economy from the breakdown of Soviet trading patterns? | The national currency, the dram |
Given the following passage
"Like other newly independent states of the former Soviet Union, Armenia's economy suffers from the breakdown of former Soviet trading patterns. Soviet investment in and support of Armenian industry has virtually disappeared, so that few major enterprises are still able to function. In addition, the effects of the 1988 Spitak earthquake, which killed more than 25,000 people and made 500,000 homeless, are still being felt. The conflict with Azerbaijan over Nagorno-Karabakh has not been resolved. The closure of Azerbaijani and Turkish borders has devastated the economy, because Armenia depends on outside supplies of energy and most raw materials. Land routes through Georgia and Iran are inadequate or unreliable. The GDP fell nearly 60% between 1989 and 1993, but then resumed robust growth. The national currency, the dram, suffered hyperinflation for the first years after its introduction in 1993.",
answer the following question. Note that the answer is present within the text.
Question: What happened after the breakdown of former Soviet trading patterns? | few major enterprises are still able to function |
Given the following passage
"Like other newly independent states of the former Soviet Union, Armenia's economy suffers from the breakdown of former Soviet trading patterns. Soviet investment in and support of Armenian industry has virtually disappeared, so that few major enterprises are still able to function. In addition, the effects of the 1988 Spitak earthquake, which killed more than 25,000 people and made 500,000 homeless, are still being felt. The conflict with Azerbaijan over Nagorno-Karabakh has not been resolved. The closure of Azerbaijani and Turkish borders has devastated the economy, because Armenia depends on outside supplies of energy and most raw materials. Land routes through Georgia and Iran are inadequate or unreliable. The GDP fell nearly 60% between 1989 and 1993, but then resumed robust growth. The national currency, the dram, suffered hyperinflation for the first years after its introduction in 1993.",
answer the following question. Note that the answer is present within the text.
Question: What did the disappearance of Soviet investment in Armenia feel like? | effects of the 1988 Spitak earthquake |
Given the following passage
"Like other newly independent states of the former Soviet Union, Armenia's economy suffers from the breakdown of former Soviet trading patterns. Soviet investment in and support of Armenian industry has virtually disappeared, so that few major enterprises are still able to function. In addition, the effects of the 1988 Spitak earthquake, which killed more than 25,000 people and made 500,000 homeless, are still being felt. The conflict with Azerbaijan over Nagorno-Karabakh has not been resolved. The closure of Azerbaijani and Turkish borders has devastated the economy, because Armenia depends on outside supplies of energy and most raw materials. Land routes through Georgia and Iran are inadequate or unreliable. The GDP fell nearly 60% between 1989 and 1993, but then resumed robust growth. The national currency, the dram, suffered hyperinflation for the first years after its introduction in 1993.",
answer the following question. Note that the answer is present within the text.
Question: Who disconnected with Armenia during the political turbulence? | Azerbaijani and Turkish |
Given the following passage
"Like other newly independent states of the former Soviet Union, Armenia's economy suffers from the breakdown of former Soviet trading patterns. Soviet investment in and support of Armenian industry has virtually disappeared, so that few major enterprises are still able to function. In addition, the effects of the 1988 Spitak earthquake, which killed more than 25,000 people and made 500,000 homeless, are still being felt. The conflict with Azerbaijan over Nagorno-Karabakh has not been resolved. The closure of Azerbaijani and Turkish borders has devastated the economy, because Armenia depends on outside supplies of energy and most raw materials. Land routes through Georgia and Iran are inadequate or unreliable. The GDP fell nearly 60% between 1989 and 1993, but then resumed robust growth. The national currency, the dram, suffered hyperinflation for the first years after its introduction in 1993.",
answer the following question. Note that the answer is present within the text.
Question: What measures the economic performance of a country? | GDP |
Given the following passage
"On the basis of the expansion and development of Yerevan State University a number of higher educational independent Institutions were formed including Medical Institute separated in 1930 which was set up on the basis of medical faculty. In 1980 Yerevan State Medical University was awarded one of the main rewards of the former USSR – the Order of Labor red Banner for training qualified specialists in health care and valuable service in the development of Medical Science. In 1995 YSMI was renamed to YSMU and since 1989 it has been named after Mkhitar Heratsi, the famous medieval doctor. Mkhitar Heratsi was the founder of Armenian Medical school in Cilician Armenia. The great doctor played the same role in Armenian Medical Science as Hippocrates in Western, Galen in Roman, Ibn Sīnā in Arabic medicine.",
answer the following question. Note that the answer is present within the text.
Question: Who was the physician equal to in an area centered on Italy? | Galen |
Given the following passage
"On the basis of the expansion and development of Yerevan State University a number of higher educational independent Institutions were formed including Medical Institute separated in 1930 which was set up on the basis of medical faculty. In 1980 Yerevan State Medical University was awarded one of the main rewards of the former USSR – the Order of Labor red Banner for training qualified specialists in health care and valuable service in the development of Medical Science. In 1995 YSMI was renamed to YSMU and since 1989 it has been named after Mkhitar Heratsi, the famous medieval doctor. Mkhitar Heratsi was the founder of Armenian Medical school in Cilician Armenia. The great doctor played the same role in Armenian Medical Science as Hippocrates in Western, Galen in Roman, Ibn Sīnā in Arabic medicine.",
answer the following question. Note that the answer is present within the text.
Question: What was the former name of the campus in a city rhyming with caravan? | YSMI |
Given the following passage
"On the basis of the expansion and development of Yerevan State University a number of higher educational independent Institutions were formed including Medical Institute separated in 1930 which was set up on the basis of medical faculty. In 1980 Yerevan State Medical University was awarded one of the main rewards of the former USSR – the Order of Labor red Banner for training qualified specialists in health care and valuable service in the development of Medical Science. In 1995 YSMI was renamed to YSMU and since 1989 it has been named after Mkhitar Heratsi, the famous medieval doctor. Mkhitar Heratsi was the founder of Armenian Medical school in Cilician Armenia. The great doctor played the same role in Armenian Medical Science as Hippocrates in Western, Galen in Roman, Ibn Sīnā in Arabic medicine.",
answer the following question. Note that the answer is present within the text.
Question: Which syndicate aiding the campus could be associated with where Stalin ruled? | Order of Labor red Banner |
Given the following passage
"Turkish authorities deny the genocide took place to this day. The Armenian Genocide is acknowledged to have been one of the first modern genocides. According to the research conducted by Arnold J. Toynbee, an estimated 600,000 Armenians died during deportation from 1915–16). This figure, however, accounts for solely the first year of the Genocide and does not take into account those who died or were killed after the report was compiled on the 24th May 1916. The International Association of Genocide Scholars places the death toll at "more than a million". The total number of people killed has been most widely estimated at between 1 and 1.5 million.",
answer the following question. Note that the answer is present within the text.
Question: What kind of event was the one where 6 hundred thousand Armenians were killed? | genocide |
Given the following passage
"Turkish authorities deny the genocide took place to this day. The Armenian Genocide is acknowledged to have been one of the first modern genocides. According to the research conducted by Arnold J. Toynbee, an estimated 600,000 Armenians died during deportation from 1915–16). This figure, however, accounts for solely the first year of the Genocide and does not take into account those who died or were killed after the report was compiled on the 24th May 1916. The International Association of Genocide Scholars places the death toll at "more than a million". The total number of people killed has been most widely estimated at between 1 and 1.5 million.",
answer the following question. Note that the answer is present within the text.
Question: Why is the 600,000 death count for the Armenian genocide inaccurate? | The total number of people killed has been most widely estimated at between 1 and 1.5 million |
Given the following passage
"Turkish authorities deny the genocide took place to this day. The Armenian Genocide is acknowledged to have been one of the first modern genocides. According to the research conducted by Arnold J. Toynbee, an estimated 600,000 Armenians died during deportation from 1915–16). This figure, however, accounts for solely the first year of the Genocide and does not take into account those who died or were killed after the report was compiled on the 24th May 1916. The International Association of Genocide Scholars places the death toll at "more than a million". The total number of people killed has been most widely estimated at between 1 and 1.5 million.",
answer the following question. Note that the answer is present within the text.
Question: What is the estimated total number of people killed in the first year? | 600,000 |
Given the following passage
"The TSFSR existed from 1922 to 1936, when it was divided up into three separate entities (Armenian SSR, Azerbaijan SSR, and Georgian SSR). Armenians enjoyed a period of relative stability under Soviet rule. They received medicine, food, and other provisions from Moscow, and communist rule proved to be a soothing balm in contrast to the turbulent final years of the Ottoman Empire. The situation was difficult for the church, which struggled under Soviet rule. After the death of Vladimir Lenin, Joseph Stalin took the reins of power and began an era of renewed fear and terror for Armenians.",
answer the following question. Note that the answer is present within the text.
Question: Who was a previous overlord? | the Ottoman Empire |
Given the following passage
"The TSFSR existed from 1922 to 1936, when it was divided up into three separate entities (Armenian SSR, Azerbaijan SSR, and Georgian SSR). Armenians enjoyed a period of relative stability under Soviet rule. They received medicine, food, and other provisions from Moscow, and communist rule proved to be a soothing balm in contrast to the turbulent final years of the Ottoman Empire. The situation was difficult for the church, which struggled under Soviet rule. After the death of Vladimir Lenin, Joseph Stalin took the reins of power and began an era of renewed fear and terror for Armenians.",
answer the following question. Note that the answer is present within the text.
Question: Why did the countries begin to fear? | Joseph Stalin took the reins of power |
Given the following passage
"The TSFSR existed from 1922 to 1936, when it was divided up into three separate entities (Armenian SSR, Azerbaijan SSR, and Georgian SSR). Armenians enjoyed a period of relative stability under Soviet rule. They received medicine, food, and other provisions from Moscow, and communist rule proved to be a soothing balm in contrast to the turbulent final years of the Ottoman Empire. The situation was difficult for the church, which struggled under Soviet rule. After the death of Vladimir Lenin, Joseph Stalin took the reins of power and began an era of renewed fear and terror for Armenians.",
answer the following question. Note that the answer is present within the text.
Question: Who was the current overlord? | Soviet rule |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.