id
large_stringlengths
9
16
title
large_stringlengths
1
382
abstract
large_stringlengths
20
6.09k
category
large_stringclasses
50 values
0709.1831
The Hot-Spot Phenomenon and its Countermeasures in Bipolar Power Transistors by Analytical Electro-Thermal Simulation
This communication deals with a theoretical study of the hot spot onset (HSO) in cellular bipolar power transistors. This well-known phenomenon consists of a current crowding within few cells occurring for high power conditions, which significantly decreases the forward safe operating area (FSOA) of the device. The study was performed on a virtual sample by means of a fast, fully analytical electro-thermal simulator operating in the steady state regime and under the condition of imposed input base current. The purpose was to study the dependence of the phenomenon on several thermal and geometrical factors and to test suitable countermeasures able to impinge this phenomenon at higher biases or to completely eliminate it. The power threshold of HSO and its localization within the silicon die were observed as a function of the electrical bias conditions as for instance the collector voltage, the equivalent thermal resistance of the assembling structure underlying the silicon die, the value of the ballasting resistances purposely added in the emitter metal interconnections and the thickness of the copper heat spreader placed on the die top just to the aim of making more uniform the temperature of the silicon surface.
cond-mat.mtrl-sci
0709.1832
Ground-state structure of the hydrogen double vacancy on Pd(111)
We determine the ground-state structure of a double vacancy in a hydrogen monolayer on the Pd(111) surface. We represent the double vacancy as a triple vacancy containing one additional hydrogen atom. The potential-energy surface for a hydrogen atom moving in the triple vacancy is obtained by density-functional theory, and the wave function of the fully quantum hydrogen atom is obtained by solving the Schr\"odinger equation. We find that an H atom in a divacancy defect experiences significant quantum effects, and that the ground-state wave function is centered at the hcp site rather than the fcc site normally occupied by H atoms on Pd(111). Our results agree well with scanning tunneling microscopy images.
cond-mat.mtrl-sci
0709.1833
Dynamical Instability of Laminar Axisymmetric Flow of Perfect Fluid with Stratification
The instability of non-homoentropic axisymmetric flow of perfect fluid with respect to non-axisymmetric infinitesimal perturbations was investigated by numerical integration of hydrodynamical differential equations in two-dimensional approximation. The non-trivial influence of entropy gradient on unstable sound and surface gravity waves was revealed. In particular, both decrease and growth of entropy against the direction of effective gravitational acceleration $g_{eff}$ give rise to growing surface gravity modes which are stable with the same parameters in the case of homoentropic flow. At the same time increment of sound modes either grows monotonically while the rate of entropy decrease against $g_{eff}$ gets higher or vanishes at some values of positive and negative entropy gradient in the basic flow. The calculations have showed also that growing internal gravity modes appear only in the flow unstable to axisymmetric perturbations. At last, the analysis of boundary problem with free boundaries uncovered that's incorrect to set the entropy distribution according to polytropic law with polytropic index different from adiabatic value, since in this case perturbations don't satisfy the free boundary conditions.
astro-ph
0709.1834
Thermal Benchmark and Power Benchmark Software
Power consumption and heat dissipation become key elements in the field of high-end integrated circuits, especially those used in mobile and high-speed applications, due to their increase of transistor count and clock frequencies. Dynamic thermal management strategies have been proposed and implemented in order to mitigate heat dissipation. However, there is a lack of a tool that can be used to evaluate DTM strategies and thermal response of real life systems. Therefore, in this paper we introduce and define the concepts of thermal benchmark software and power benchmark software as a software application for run-time system level thermal and power characterization
cond-mat.mtrl-sci
0709.1835
Quantitative 3w-Scanning Thermal Microscopy: Modelling the AC/DC coupling and the sample heat conduction
A way to increase the Scanning Thermal Microscope (SThM) sensitivity in the harmonic 3w mode is to heat the probe with an AC current sufficiently high to generate a coupling between the AC and the DC signals. We detail in this paper how to properly take into account this coupling with a Wollaston-probe SThM. We also show how to link correctly the thermal conductivity to the thermal conductance measured by the SThM.
cond-mat.mtrl-sci
0709.1836
Design issues of a variable thermal resistance
Some years ago we have proposed a thermal mount with electronically variable thermal resistance [1]. In this earlier work the feasibility of such a structure has been demonstrated. Now we intend to realize this mount in a maturated form, suitable to the everyday use in the practice of package thermal qualification and modeling. The design of such a device raises a number of new questions and problems. The present paper is dealing with these problems and the possible solutions.
cond-mat.mtrl-sci
0709.1838
Matching of correlators in AdS_3/CFT_2
Recently exact agreement has been found between three-point correlators of chiral operators computed in string theory on AdS_3 x S^3 x T^4 with NS-NS flux and those computed in the symmetric orbifold CFT. However, it has also been shown that these correlators disagree with those computed in supergravity, under any identification of single particle operators which respects the symmetries. In this note we resolve this disagreement: the key point is that mixings with multi-particle operators are not suppressed even at large N in extremal correlators. Allowing for such mixings, orbifold/string theory operators and supergravity operators can be matched such that both non-extremal and extremal three point functions agree, giving further evidence for the non-renormalization of the chiral ring.
hep-th
0709.1839
A Magnetohydrodynamic Boost for Relativistic Jets
We performed relativistic magnetohydrodynamic simulations of the hydrodynamic boosting mechanism for relativistic jets explored by Aloy & Rezzolla (2006) using the RAISHIN code. Simulation results show that the presence of a magnetic field changes the properties of the shock interface between the tenuous, overpressured jet ($V^z_j$) flowing tangentially to a dense external medium. Magnetic fields can lead to more efficient acceleration of the jet, in comparison to the pure-hydrodynamic case. A ``poloidal'' magnetic field ($B^z$), tangent to the interface and parallel to the jet flow, produces both a stronger outward moving shock and a stronger inward moving rarefaction wave. This leads to a large velocity component normal to the interface in addition to acceleration tangent to the interface, and the jet is thus accelerated to larger Lorentz factors than those obtained in the pure-hydrodynamic case. Likewise, a strong ``toroidal'' magnetic field ($B^y$), tangent to the interface but perpendicular to the jet flow, also leads to stronger acceleration tangent to the shock interface relative to the pure-hydrodynamic case. Overall, the acceleration efficiency in the ``poloidal'' case is less than that of the ``toroidal'' case but both geometries still result in higher Lorentz factors than the pure-hydrodynamic case. Thus, the presence and relative orientation of a magnetic field in relativistic jets can significant modify the hydrodynamic boost mechanism studied by Aloy & Rezzolla (2006).
astro-ph
0709.1840
Localized Lna Cooling in Vacuum
In the Square Kilometre Array (SKA) telescope [1], [2], the noise temperature of the first LNA must be reduced in order to reduce the necessary active area and the total system costs. Cooling the LNA locally would significantly decrease the noise figure but also the necessary power since not the whole system has to be cooled. For optimal thermal isolation, an LNA chip which only needs 6 bondwires has been chosen, 4 Ground and 2 signal wires. Biasing occurs on-chip. If the bondwires are 1.5mm long, the total heat conduction of the 6 bondwires is 31 mW, which is added to the power consumption of the LNA (30 mW). With a power of 61 mW to cool, the Peltier element can achieve a -T of 60K. With this system, a noise reduction of 30% has been measured with 0.5W of electrical power. For 15% noise reduction, only 35mW of electrical power was needed.
cond-mat.mtrl-sci
0709.1841
UV and optical emission lines from the z=2.6 radio galaxy 0828+193: spatially resolved measurements
We present an investigation into the spatial variation of the rest-frame UV and optical line and continuum emission along the radio axis of the z=2.6 radio galaxy 0828+193, using long-slit spectra from the Keck II and Subaru telescopes. Line brightnesses, line ratios and electron temperatures are examined, and their relationship with the arm-length asymmetry of the radio source is also investigated. We find that on the side of the nucleus with the shortest radio lobe, the gas covering factor is higher, and the ionization parameter is lower. The contrasts in environmental density required to explain the asymmetries in the line brightness and the radio arm-length asymmetries are in fair agreement with each other. These results add further weight to the conclusion of McCarthy, van Breugel & Kapahi (1991) - lobe distance asymmetries in powerful radio sources are the result of an asymmetry in the environmental density. We also note that the brightness of both the UV and optical continuum emission shows a similar spatial asymmetry to that shown by the line emission. While the UV continuum asymmetry can be wholly explained by the expected asymmetry in the nebular continuum, the optical continuum asymmetry cannot. We argue that, at least at optical wavelengths, the starlight and/or the scattered light must also be strongly spatially asymmetric.
astro-ph
0709.1842
Optimised Curing of Silver Ink Jet Based Printed Traces
Manufacturing electronic devices by printing techniques with low temperature sintering of nano-size material particles can revolutionize the electronics industry in coming years. The impact of this change to the industry can be significant enabling low-cost products and flexibility in manufacturing. implementation of a new production technology with new materials requires thorough elementary knowledge creation. It should be noticed that although some of first electronic devices ideally can be manufactured by printing, at the present several modules are in fact manufactured by using hybrid techniques (for instance photolithography, vapor depositions, spraying, etc...).
cond-mat.mtrl-sci
0709.1844
A summary of the beatwave experiments at Ecole Polytechnique
We present a summary of the beatwave particle acceleration program developed at Ecole Polytechnique. In dedicated experiments, plasma formation, plasma wave generation and saturation, and particle acceleration were successively studied and understood in detail. A maximum energy gain of 1.3 MeV was obtained, which is compatible with an accelerating gradient of 0.7 GV/m.
physics.plasm-ph
0709.1845
Measurements of Thermophysical Property of Thin Films by Light Pulse Heating Thermoreflectance Methods
Thermoreflectance methods by picosecond pulse heating and by nanosecond pulse heating have been developed under the same geometrical configuration as the laser flash method by the National Metrology Institute of JAPAN, AIST. Using these light pulse heating methods, thermal diffusivity of each layer of multilayered thin films and boundary thermal resistance between the layers can be determined from the observed transient temperature curves based on the response function method. The measurement results of various thin films as transparent conductive films used for flat panel displays, hard coating films and multilayered films of the next generation phase-change optical disk will be presented.
cond-mat.mtrl-sci
0709.1847
Discovery of Gas Accretion Onto Stars in 13 Myr old h and chi Persei
We report the discovery of accretion disks associated with ~ 13 Myr-old intermediate/low-mass stars in h and chi Persei. Optical spectroscopy of ~ 5000 stars in these clusters and a surrounding halo population reveal 32 A-K stars with H(alpha) emission. Matching these stars with 2MASS and optical photometry yields 25 stars with the highest probability of cluster membership and EW(H(alpha)) > 5 angstroms. Sixteen of these sources have EW(H(alpha)) > 10 angstroms. The population of accreting sources is strongly spectral type dependent: H(alpha) emission characteristic of accretion, especially strong accretion (EW(H(alpha)) > 10 angstroms), is much more prevalent around stars later than G0. Strong H(alpha) emission from accretion is typically associated with redder Ks-[8] colors. The existence of accreting pre-main sequence stars in h and chi Persei implies that circumstellar gas in some systems, especially those with primaries later than G5 spectral type, can last longer than 10-15 Myr.
astro-ph
0709.1848
CP Violation and Flavour Mixings in Orbifold GUTs
We address the flavour problem by incorporating the hypothesis of universal strength of Yukawa couplings in the framework of a 5D GUT model compactified on an $S^1/(Z_2 \times Z_2^{\prime})$ orbifold. We show that a quantitatively successful picture of fermion masses and mixings emerges from the interplay between the bulk suppression factors of geometric origin and the phases of the Yukawa matrices. We give an explicit example, where we obtain a good fit for both the CKM and PMNS matrices.
hep-ph
0709.1849
Characterization of Thermal Interface Materials to Support Thermal Simulation
In this paper new characterization equipment for thermal interface materials is presented. Thermal management of electronic products relies on the effec-tive dissipation of heat. This can be achieved by the optimization of the system design with the help of simulation methods. The precision of these models relies also on the used material data. For the determi-nation of this data an experimental set-up for a static measurement is presented, which evaluates thermal conductivity and interface resistance of thermal inter-face materials (e.g. adhesive, solder, pads, or pastes). A qualitative structure-property correlation is pro-posed taking into account particle size, filler content and void formation at the interface based on high resolution FIB imaging. The paper gives an overview over the set-up and the measurement technique and discusses experimental and simulation results.
cond-mat.mtrl-sci
0709.1850
Ultrafast Temperature Profile Calculation in Ic Chips
One of the crucial steps in the design of an integrated circuit is the minimization of heating and temperature non-uniformity. Current temperature calculation methods, such as finite element analysis and resistor networks have considerable computation times, making them incompatible for use in routing and placement optimization algorithms. In an effort to reduce the computation time, we have developed a new method, deemed power blurring, for calculating temperature distributions using a matrix convolution technique in analogy with image blurring. For steady state analysis, power blurring was able to predict hot spot temperatures within 1 degree C with computation times 3 orders of magnitude faster than FEA. For transient analysis the computation times where enhanced by a factor of 1000 for a single pulse and around 100 for multiple frequency application, while predicting hot spot temperature within about 1 degree C. The main strength of the power blurring technique is that it exploits the dominant heat spreading in the silicon substrate and it uses superposition principle. With one or two finite element simulations, the temperature point spread function for a sophisticated package can be calculated. Additional simulations could be used to improve the accuracy of the point spread function in different locations on the chip. In this calculation, we considered the dominant heat transfer path through the back of the IC chip and the heat sink. Heat transfer from the top of the chip through metallization layers and the board is usually a small fraction of the total heat dissipation and it is neglected in this analysis.
cond-mat.mtrl-sci
0709.1851
A Coupled Thermoreflectance Thermography Experimental System and Ultra-Fast Adaptive Computational Engine for the Complete Thermal Characterization of Three-Dimensional Electronic Devices: Validation
This work builds on the previous introduction [1] of a coupled experimental-computational system devised to fully characterize the thermal behavior of complex 3D submicron electronic devices. The new system replaces the laser-based surface temperature scanning approach with a CCD camera-based approach. As before, the thermo-reflectance thermography system is used to non-invasively measure with submicron resolution the 2D surface temperature field of an activated device. The measured temperature field is then used as input for an ultra-fast inverse computational solution to fully characterize the thermal behavior of the complex three-dimensional device. For the purposes of this investigation, basic micro-heater devices were built, activated, and measured. In order to quantitatively validate the coupled experimental-computational system, the system was used to extract geometric features of a known device, thus assessing the system's ability to combine measured experimental results and computations to fully characterize complex 3D electronic devices.
cond-mat.mtrl-sci
0709.1852
Thermal Transient Multisource Simulation Using Cubic Spline Interpolation of Zth Functions
This paper presents a very straightforward method to compute the transient thermal response to arbitrary power dissipation profiles in electronic devices with multiple heat sources. Using cubic spline interpolation of simulated or measured unit power step response curves (Zth-functions), additional errors due to model reduction can be avoided. No effort has to be spent on the generation of compact models. The simple analytic form of the interpolating splines can be exploited to evaluate the convolution integral of the Zth-functions with arbitrary power profiles at low computational costs. An implementation of the algorithm in a spreadsheet program (EXCEL) is demonstrated. The results are in very good agreement with temperature profiles computed by transient Finite Element simulation but can be obtained in a fraction of the time.
cond-mat.mtrl-sci
0709.1853
Formation of Moving Magnetic Features and Penumbral Magnetic Fields with Hinode/SOT
Vector magnetic fields of moving magnetic features (MMFs) are well observed with the Solar Optical Telescope (SOT) aboard the Hinode satellite. We focus on the evolution of three MMFs with the SOT in this study. We found that an MMF having relatively vertical fields with polarity same as the sunspot is detached from the penumbra around the granules appeared in the outer penumbra. This suggests that granular motions in the outer penumbra are responsible for the disintegration of the sunspot. Two MMFs with polarity opposite to the sunspot are located around the outer edge of horizontal fields extending from the penumbra. This is an evidence that the MMFs with polarity opposite to the sunspot are prolongation of penumbral horizontal fields. Radshifts larger than sonic velocity in the photosphere are detected for some of the MMFs with polarity opposite to the sunspot.
astro-ph
0709.1855
GRB 060218: The nature of the optical-UV component
The optical-UV component in GRB 060218 is assumed to be due to optically thick cyclotron emission. The key aspect of this model is the high temperature of the absorbing electrons. The heat input derives from nuclei accelerated in semi-relativistic internal shocks, like in ordinary gamma-ray bursts. Coulomb collisions transfer part of that energy to electrons. Inverse Compton cooling on the X-ray photons leads to electron temperatures around 100 keV. Such a high brightness temperature for the optical-UV emission implies an emitting area roughly equal to that of the thermal X-ray component. This suggests a model in which the radio, optical-UV and thermal X-ray emission are closely related: Although the optical-UV and thermal X-ray emission are two separate spectral components, it is argued that they both come from the photosphere of a quasi-spherical, continuous outflow, whose interaction with the circumstellar medium gives rise to the radio emission. The properties of GRB 060218, as measured in the co-moving frame, are similar to those of ordinary gamma-ray burst; i.e., the main difference is the much lower value of the bulk Lorentz factor in GRB 060218. The cyclotron absorption implies a magnetic field in rough equipartition with the matter energy density in the outflow. Hence, the magnetic field could have a dynamically important role, possibly with a magnetar as the central engine.
astro-ph
0709.1856
-55 degrees C to 170 degrees C High Linear Voltage References Circuitry in 0.18\`im Cmos Technology
High linear voltage references circuitry are designed and implemented in TSMC 0.18$\mu$m CMOS technology. Previous research has proposed the use of MOS transistors operating in the weak inversion region to replace the bipolar devices in conventional PTAT(proportional to absolute temperature) circuits. However such solutions often have linearity problem in high temperature region due to the current leaking devices in modern deep sub micron and nano-scale CMOS technology. The proposed circuit utilized temperature complementation technique on two voltage references, PTAT and IOAT (independent of absolute temperature) references, to enhance the linearity and produce a more stable IOAT voltage reference. Base on the simulation results, the R-squares of both circuitries are better than 0.999 in a considerable wider temperature range from -55 degrees C to 170 degrees C. Thus, a fully integrated temperature sensor with wider temperature range is designed and easily to integrate to modern system-on-chip designs with minimal efforts.
cond-mat.mtrl-sci
0709.1857
Gauge unification in noncommutative geometry
Gauge unification is widely considered to be a desirable feature for extensions of the standard model. Unfortunately the standard model itself does not exhibit a unification of its running gauge couplings but it is required by grand unified theories as well as the noncommutative version of the standard model [2]. We will consider here the extension of the noncommutative standard model by vector doublets as proposed in [6]. Two consequences of this modification are: 1. the relations of the coupling constants at unification energy are altered with respect to the well known relation from grand unified theories. 2. The extended model allows for unification of the gauge couplings at ~10^(13) GeV.
hep-ph
0709.1859
Self-organized escape of oscillator chains in nonlinear potentials
We present the noise free escape of a chain of linearly interacting units from a metastable state over a cubic on-site potential barrier. The underlying dynamics is conservative and purely deterministic. The mutual interplay between nonlinearity and harmonic interactions causes an initially uniform lattice state to become unstable, leading to an energy redistribution with strong localization. As a result a spontaneously emerging localized mode grows into a critical nucleus. By surpassing this transition state, the nonlinear chain manages a self-organized, deterministic barrier crossing. Most strikingly, these noise-free, collective nonlinear escape events proceed generally by far faster than transitions assisted by thermal noise when the ratio between the average energy supplied per unit in the chain and the potential barrier energy assumes small values.
cond-mat.stat-mech
0709.1860
Modeling with structure of resins in electonic compornents
In recent years, interfacial fracture becomes one of the most important problems in the assessment of reliability of electronics packaging. Especially, underfill resin is used with solder joints in flip chip packaging for preventing the thermal fatigue fracture in solder joints. In general, the interfacial strength has been evaluated on the basis of interfacial fracture mechanics concept. However, as the size of devices decrease, it is difficult to evaluate the interfacial strength quantitatively. Most of researches in the interfacial fracture were conducted on the basis of the assumption of the perfectly bonding condition though the interface has the micro-scale structure and the bonding is often imperfect. In this study, the mechanical model of the interfacial structure of resin in electronic components was proposed. Bimaterial model with the imperfect bonding condition was examined by using a finite element analysis (FEA). Stress field in the vicinity of interface depends on the interfacial structure with the imperfect bonding. In the front of interfacial crack tip, the behavior of process zone is affected by interfacial structure. However, the instability of fracture for macroscopic crack which means the fracture toughness is governed by the stress intensity factor based on the fracture mechanics concept.
cond-mat.mtrl-sci
0709.1861
Temperature measurement in the Intel(R) CoreTM Duo Processor
Modern CPUs with increasing core frequency and power are rapidly reaching a point where the CPU frequency and performance are limited by the amount of heat that can be extracted by the cooling technology. In mobile environment, this issue is becoming more apparent, as form factors become thinner and lighter. Often, mobile platforms trade CPU performance in order to reduce power and manage thermals. This enables the delivery of high performance computing together with improved ergonomics by lowering skin temperature and reducing fan acoustic noise. Most of available high performance CPUs provide thermal sensor on the die to allow thermal management, typically in the form of analog thermal diode. Operating system algorithms and platform embedded controllers read the temperature and control the processor power. Improved thermal sensors directly translate into better system performance, reliability and ergonomics. In this paper we will introduce the new Intel CoreTM Duo processor temperature sensing capability and present performance benefits measurements and results.
cond-mat.mtrl-sci
0709.1862
Dark Matter in the U(1) Extended SUSY
The neutralino sector of the U(1) extended SUSY is presented and some collider and cosmology-related phenomenology discussed.
hep-ph
0709.1863
Reducing the Possibility of Subjective Error in the Determination of the Structure-Function-Based Effective Thermal Conductivity of Boards
The thermal response function given to a unit-step dissipation accurately characterizes the thermal system. Instead of the thermal response function the so-called structure function describing three-dimensional as the equivalent model of one-dimensional heat-spreading, created from the thermal response function with the help of complex mathematical procedures, is often used. Using the structure function the partial thermal capacity and partial heat resistance of certain elements of the thermal system can be identified. If the geometrical measurements of a thermal system of simple geometry and homogeneous material (such as a homogeneous rod or board, etc.) are known, the coefficient of thermal conductivity of the material in question can be determined from two points of the structure function at 2-5 per cent of accuracy. In this paper a method is presented which applies a wide range/section instead of two points of the cumulative structure function to determine the thermal coefficient, thus reducing the subjective error deriving from the selection of the two points. The above method is presented and illustrated in simulated as well as measured thermal transient responses.
cond-mat.mtrl-sci
0709.1864
A More Flexible Realization of The SUNRED Algorithm
The high dissipation of integrated circuits means serious problems for packaging and for the design of complex electronic systems. Another important area of research and development nowadays is the integration of sensors and micromechanical systems (MEMS) with electronic circuits. The original Successive Node Reduction (SUNRED) algorithm handles well the first area but require revision for electro-thermal or mechanical fields. As a first stage the updated algorithm is able to solve thermal fields as the original, but with the application of flexible boundary connection handling, it can be much faster than the original. By using object-oriented program model the algorithm can handle non-rectangular 3D fields, and SUNRED mesh resolution is arbitrary, not have to be the power of two anymore.
cond-mat.mtrl-sci
0709.1865
Orthonormal dilations of Parseval wavelets
We prove that any Parseval wavelet frame is the projection of an orthonormal wavelet basis for a representation of the Baumslag-Solitar group $$BS(1,2)=< u,t | utu^{-1}=t^2>.$$ We give a precise description of this representation in some special cases, and show that for wavelet sets, it is related to symbolic dynamics. We show that the structure of the representation depends on the analysis of certain finite orbits for the associated symbolic dynamics. We give concrete examples of Parseval wavelets for which we compute the orthonormal dilations in detail; we show that there are examples of Parseval wavelet sets which have infinitely many non-isomorphic orthonormal dilations.
math.FA
0709.1866
The application of Artificial Neural Network for the assessment of thermal properties of multi-layer semiconductor structure
In this paper, the solution of the problem of identification of thermal properties of investigated multi-layer structure is presented. In order of that, artificial neural network was used to find the set of thermal properties for which the complex contrast characteric derived fits the best to the one evaluated basing upon experimenatal data.
cond-mat.mtrl-sci
0709.1867
Na61/Shine at the CERN SPS
Status of the new experimental program to study hadron production in hadron-nucleus and nucleus-nucleus collisions at the CERN SPS will be presented. In particular, a detailed physics motivation and experimental strategy will be given for the part of the program related to the physics of strongly interacting matter: search for the critical point of strongly interacting matter, study properties of the onset of deconfinement, and high p_T measurements in p+p and p+A interactions. The planned measurements for the neutrino T2K and cosmic-ray experiments will also be discussed.
nucl-ex
0709.1868
A Temperature Analysis of High-power AlGaN/GaN HEMTs
Galliumnitride has become a strategic superior material for space, defense and civil applications, primarily for power amplification at RF and mm-wave frequencies. For AlGaN/GaN high electron mobility transistors (HEMT), an outstanding performance combined together with low cost and high flexibility can be obtained using a System-in-a-Package (SIP) approach. Since thermal management is extremely important for these high power applications, a hybrid integration of the HEMT onto an AlN carrier substrate is proposed. In this study we investigate the temperature performance for AlGaN/GaN HEMTs integrated onto AlN using flip-chip mounting. Therefore, we use thermal simulations in combination with experimental results using micro-Raman spectroscopy and electrical dc-analysis.
cond-mat.mtrl-sci
0709.1870
The method of non-linear distortions elimination in photoacoustic investigation of layered semiconductor structure
This paper presents the consideration of the presence and the influence of non-linear distortion of photo-acoustic measurement set-up on the results of thermal properties analysis for the multi-layer semiconductor structure. The authors propose a method which will eliminate such an influence.
cond-mat.mtrl-sci
0709.1871
Thermal Modeling of high power LED modules
This paper presents a study of accuracy issues in thermal modeling of high power LED modules on system level. Both physical as well as numerical accuracy issues are addressed. Incorrect physical assumptions may result in seemingly correct, but erroneous results. It is therefore important to motivate the underlying key physical assumptions of a thermal model. In this paper thermal measurements are used to calibrate a computational fluid dynamics (CFD) model of a high power LED module model at a reference application condition, and to validate it at other application conditions.
cond-mat.mtrl-sci
0709.1877
The central parsecs of Centaurus A: High Excitation Gas, a Molecular Disk, and the Mass of the Black Hole
We present two-dimensional gas-kinematic maps of the central region in Centaurus A. The adaptive optics (AO) assisted SINFONI data from the VLT have a resolution of 0.12" in K-band. The ionized gas species (Br_gamma, [FeII], [SiVI]) show a rotational pattern that is increasingly overlaid by non-rotational motion for higher excitation lines in direction of Cen A's radio jet. The emission lines of molecular hydrogen (H_2) show regular rotation and no distortion due to the jet. The molecular gas seems to be well settled in the gravitational potential of the stars and the central supermassive black hole and we thus use it as a tracer to model the mass in the central +/-1.5". These are the first AO integral-field observations on the nucleus of Cen A, enabling us to study the regularity of the rotation around the black hole, well inside the radius of influence, and to determine the inclination angle of the gas disk in a robust way. The gas kinematics are best modeled through a tilted-ring model that describes the warped gas disk; its mean inclination angle is ~34deg and the mean position angle of the major axis is ~155deg. The best-fit black hole mass is M_BH~4.5x10^7 Msolar, based on a "kinematically hot" disk model where the velocity dispersion is included through the Jeans equation. This black hole mass estimate is somewhat lower than, but consistent with the mass values previously derived from ionized gas kinematics. It is also consistent with the stellar dynamical measurement from the same AO observations, which we present in a separate paper. It brings Cen A in agreement with the M_BH-sigma relation.
astro-ph
0709.1879
Thermal Design of Power Semiconductor Modules for Mobile Communication Systems
We will describe the thermal performance of power semiconductor module, which consists of hetero-junction bipolar transistors (HBTs), for mobile communication systems. We calculate the thermal resistance between the HBT fingers and the bottom surface of a multi-layer printed circuit board (PCB) using a finite element method (FEM). We applied a steady state analysis to evaluate the influence of design parameters on thermal resistance of the module. We found that the thickness of GaAs substrate, the thickness of multi-layer circuit board, the thermal conductivity of bonding material under GaAs substrate, and misalignment of thermal vias between each layer of PCB are the dominant parameter in thermal resistance of the module.
cond-mat.mtrl-sci
0709.1881
Gamma-ray blazars: the combined AGILE and MAGIC views
We describe the emission properties of blazars, i.e. the AGNs that, due to their peculiar orientation w.r.t. the observer, allow the most penetrating and direct view of their central engine. After showing that the extragalactic GeV-TeV sky is dominated by blazars of various types, we discuss the kind of blazars that are likely to be jointly detected by AGILE and MAGIC.
astro-ph
0709.1882
Waves, analytical signals, and some postulates of quantum theory
In this paper we apply the formalism of the analytical signal theory to the Schrodinger wavefunction. Making use exclusively of the wave-particle duality and the principle of relativistic covariance, we actually derive the form of the quantum energy and momentum operators for a single nonrelativistic particle. Without using any more quantum postulates, and employing the formalism of the characteristic function, we also derive the quantum-mechanical prescription for the measurement probability in such cases.
quant-ph
0709.1883
The structure of line-driven winds
Following procedures pioneered by Castor, Abbott & Klein (1975, [CAK]), spherically-symmetric supersonic winds for O stars are computed for matching to plane-parallel moving reversing layers (RL's) from Paper I (Lucy 2007). In contrast to a CAK wind, each of these solutions is singularity-free, thus allowing its mass-loss rate to be fixed by the regularity condition at the sonic point within the RL. Moreover, information propagation in these winds by radiative-acoustic waves is everywhere outwardly-directed, justifying the implicit assumption in Paper I that transonic flows are unaffected by inwardly-directed wave motions.
astro-ph
0709.1884
Growth of Epitaxial MgB2 Thick Films with Columnar Structures by Using HPCVD
Epitaxial MgB2 thick films were grown on Al2O3 substrates at 600 oC by using the hybrid physical chemical vapor deposition (HPCVD) technique. In order to obtain a high magnesium vapor pressure around the substrates, we used a special susceptor having a susceptor cap and achieved a very high growth rate of 0.17 um/min. Hexgonal-shaped columnar structures were observed by cross-sectional and planar view transmission electron microscope (TEM) images. For the 1.7-um-thick film, the Tc was observed to be 40.5 K with a Jc of 1.5 x 10^6 A/cm^2 at 30 K. The vortex pinning mechanism by intercolumnar boundaries will be discussed.
cond-mat.supr-con
0709.1885
Local electronic properties in nanoscale systems
The local electronic structure on nanoscale chains is investigated theoretically. We propose a mechanism to explain the even-odd oscillation of length distribution of atom chains. We study the spatial peak structure as obtained by scanning tunneling microscopy (STM) constant-current topography as a function of the electron-electron interaction, band filling and temperature. The site-dependent magnetic moment is also examined.
cond-mat.str-el
0709.1886
Mass loss and very low-metallicity stars
Mass loss plays a dominant role in the evolution of massive stars at solar metallicity. After discussing different mass loss mechanisms and their metallicity dependence, we present the possibility of strong mass loss at very low metallicity. Our models at Z=1e-8 show that stars more massive than about 60 solar masses may lose a significant fraction of their initial mass in the red supergiant phase. This mass loss is due to the surface enrichment in CNO elements via rotational and convective mixing. Our 85 solar mass model ends its life as a fast rotating WO type Wolf-Rayet star. Therefore the models predict the existence of type Ic SNe and long and soft GRBs at very low metallicities. Such strong mass loss in the red supergiant phase or the Omega-Gamma limit could prevent the most massive stars from ending as pair-creation supernovae. The very low metallicity models calculated are also very interesting from the nucleosynthesis point of view. Indeed, the wind of the massive star models can reproduce the CNO abundances of the most metal-poor carbon-rich star known to date, HE1327-2326. Finally, using chemical evolution models, we are able to reproduce the evolution of CNO elements as observed in the normal extremely metal poor stars.
astro-ph
0709.1887
The space density of cataclysmic variables: constraints from the ROSAT North Ecliptic Pole Survey
We use the ROSAT North Ecliptic Pole (NEP) survey to construct a small, but purely X-ray flux-limited sample of cataclysmic variable stars (CVs). The sample includes only 4 systems, 2 of which (RX J1715.6+6856 and RX J1831.7+6511) are new discoveries. We present time-resolved spectroscopy of the new CVs and measure orbital periods of 1.64 \pm 0.02 h and 4.01\pm 0.03 h for RX 1715.6+6856 and RX J1831.7+6511, respectively. We also estimate distances for all the CVs in our sample, based mainly on their apparent brightness in the infrared. The space density of the CV population represented by our small sample is (1.1 +2.3/-0.7) 10^-5 pc^-3. We can also place upper limits on the space density of any sub-population of CVs too faint to be included in the NEP survey. In particular, we show that if the overall space density of CVs is as high as 2 10^-4 pc^-3 (as has been predicted theoretically), the vast majority of CVs must be fainter than L_X \simeq 2 10^29 erg/s.
astro-ph
0709.1888
Localization of fermionic fields on braneworlds with bulk tachyon matter
Recently, Pal and Skar in [arXiv:hep-th/0701266] proposed a mechanism to arise the warped braneworld models from bulk tachyon matter, which are endowed with a thin brane and a thick brane. In this framework, we investigate localization of fermionic fields on these branes. As in the 1/2 spin case, the field can be localized on both the thin and thick branes with inclusion of scalar background. In the 3/2 spin extension, the general supergravity action coupled to chiral supermultiplets is considered to produce the localization on both the branes as a result.
hep-th
0709.1889
Two-electron bound state formation in the t-J-U model for exchange-coupled planes
An anisotropic t-J-U model Hamiltonian is used to model electron behaviour in quasi-2d materials in the dilute limit, and as a highly simplified representation of the weakly coupled CuO2 planes of the high-Tc cuprates we model the very poor out-of-plane conductivity via the complete suppression of interplanar hopping. However, we do include the very weak interplanar superexchange, and are thus considering a model of exchange-coupled planes. For an isotropic three-dimensional system in the dilute limit, we find that the formation of two-particle bound states requires Jc/t ~ 5.9. Also, it is known that Jc/t = 2 for a 2d square lattice. However, for our model of exchange-coupled planes any infinitesimal interplanar exchange (Jc = 0) is adequate to form bound states.
cond-mat.str-el
0709.1891
Wind and boundary layers in Rayleigh-Benard convection. Part 2: boundary layer character and scaling
The effect of the wind of Rayleigh-Benard convection on the boundary layers is studied by direct numerical simulation of an L/H=4 aspect-ratio domain with periodic side boundary conditions for Ra={10^5, 10^6, 10^7} and Pr=1. It is shown that the kinetic boundary layers on the top- and bottom plate have some features of both laminar and turbulent boundary layers. A continuous spectrum, as well as significant forcing due to Reynolds stresses indicates undoubtedly a turbulent character, whereas the classical integral boundary layer parameters -- the shape factor and friction factor (the latter is shown to be dominated by the pressure gradient) -- scale with Reynolds number more akin to laminar boundary layers. This apparent dual behavior is caused by the large influence of plumes impinging onto and detaching from the boundary layer. The plume-generated Reynolds stresses have a negligible effect on the friction factor at the Rayleigh numbers we consider, which indicates that they are passive with respect to momentum transfer in the wall-parallel direction. However, the effect of Reynolds stresses cannot be neglected for the thickness of the kinetic boundary layer. Using a conceptual wind model, we find that the friction factor C_f should scale proportional to the thermal boundary layer thickness as C_f ~ lambda_Theta, while the kinetic boundary layer thickness lambda_u scales inversely proportional to the thermal boundary layer thickness and wind Reynolds number lambda_u ~ lambda_Theta^{-1} Re^{-1}. The predicted trends for C_f and \lambda_u are in agreement with DNS results.
physics.flu-dyn
0709.1892
Records Theory
In quantum gravity, one seeks to combine quantum mechanics and general relativity. In such attempts, one comes across the `problem of time' impasse: the notion of time is conceptually different in each of these theories. In this paper, I consider the timeless records approach toward resolving this. Records are localized, information-containing subconfigurations of a single instant. Records theory is the study of these and of how science (or history) is to be abstracted from correlations between them. I critically evaluate motivations for this approach that have previously appeared in the literature. I provide a ground-level structure for records theory and discuss what kind of further tools are needed, illustrated with some toy models: ordinary mechanics, relatonal particle dynamics, detector models and inhomogeneous perturbations about homogeneous cosmology.
gr-qc
0709.1893
International Linear Collider Reference Design Report Volume 2: PHYSICS AT THE ILC
This article reviews the physics case for the ILC. Baseline running at 500 GeV as well as possible upgrades and options are discussed. The opportunities on Standard Model physics, Higgs physics, Supersymmetry and alternative theories beyond the Standard Model are described.
hep-ph
0709.1894
Direct mechanical mixing in a nanoelectromechanical diode
We observe direct mechanical mixing in nanoelectromechanical transistors fabricated in semiconductor materials operating in the radio frequency band of 10-1000 MHz. The device is made of a mechanically flexible pillar with a length of 240 nm and a diameter of 50 nm, placed between two electrodes in an impedance matched coplanar wave guide. We find a non-linear IV-characteristic, which enables radio frequency mixing of two electromagnetic signals via the nanomechanical transistor. Potential applications for this mixer are ultrasensitive displacement detection or signal processing in communication electronic circuits requiring high-throughput insulation.
cond-mat.mes-hall
0709.1895
Broadband X-ray spectrum of the newly discovered broad line radio galaxy IGR J21247+5058
In this paper we present radio and high energy observations of the INTEGRAL source IGR J21247+5058, a broad line emitting galaxy obscured by the Galactic plane. Archival VLA radio data indicate that IGR J21247+5058 can be classified as an FRII Broad Line Radio Galaxy. The spectrum between 610 MHz and 15 GHz is typical of synchrotron self-absorbed radiation with a peak at 8 GHz and a low energy turnover; the core fraction is 0.1 suggestive of a moderate Doppler boosting of the base of the jet. The high energy broad-band spectrum was obtained by combining XMM-Newton and Swift/XRT observation with INTEGRAL/IBIS data. The 0.4-100 keV spectrum is well described by a power law, with slope $\Gamma$=1.5, characterised by complex absorption due to two layers of material partially covering the source and a high energy cut-off around 70-80 keV. Features such as a narrow iron line and a Compton reflection component, if present, are weak, suggesting that reprocessing of the power law photons in the accretion disk plays a negligible role in the source.
astro-ph
0709.1898
Spectra, triple and quartic gauge couplings in a Higgsless model
Spectra, triple and quartic gauge couplings of the Higgsless model with gauge group $SU(2)_L\times SU(2)_R\times U(1)_{B-L}$ defined in warped space are explored with numerical method. We extend the equation of motions, boundary conditions and formalism of multi-gauge-boson vertices to the Hirn-Sanz scenario. By assuming the ideally delocalized fermion profile, we study the spectra of vector bosons as well as the triple and quartic gauge couplings among vector bosons. It is found that mass spectra can be greatly modified by the parameters of QCD power corrections. Meanwhile, the triple and quartic gauge couplings can deviate from the values of the standard model to at least $\pm 10%$ and can saturate the LEP2 bounds. We find the triple gauge couplings of $Z{\bar W}W$ can be $ 50 %$ smaller than the unitarity bounds. While the triple gauge couplings of ${\bar Z}WW$ is 20% smaller than the unitarity bounds, which might challenge the detection of ${\bar Z}$ via s channel at LHC if $m_{\bar Z}> 500$ GeV.
hep-ph
0709.1901
The statistical significance of the N-S asymmetry of solar activity revisited
The main aim of this study is to point out the difficulties found when trying to assess the statistical significance of the North-South asymmetry (hereafter SSNSA) of the most usually considered time series of solar activity. First of all, we distinguish between solar activity time series composed by integer or non-integer and dimensionless data, or composed by non-integer and dimensional data. For each of these cases, we discuss the most suitable statistical tests which can be applied and highlight the difficulties to obtain valid information about the statistical significance of solar activity time series. Our results suggest that, apart from the need to apply the suitable statistical tests, other effects such as the data binning, the considered units and the need, in some tests, to consider groups of data, affect substantially the determination of the statistical significance of the asymmetry. Our main conclusion is that the assessment of the statistical significance of the N-S asymmetry of solar activity is a difficult matter and that an absolute answer cannot be given, since many different effects influence the results given by the statistical tests. In summary, the quantitative results about the statistical significance of the N-S asymmetry of solar activity provided by different authors, as well as the studies about its behaviour, must be considered with care because they depend from the chosen values of different parameters or from the considered units.
astro-ph
0709.1902
Lattice QCD Beyond Ground States
In this work, we apply black box methods (methods not requiring input) to find excited-state energies. A variety of such methods for lattice QCD were introduced at the 3rd iteration of the numerical workshop series. We first review a selection of approaches that have been used in lattice calculations to determine multiple energy states: multiple correlator fits, the variational method and Bayesian fitting. In the second half, we will focus on a black box method, the multi-effective mass. We demonstrate the approach on anisotropic lattice data, extracting multiple states from single correlators. Without complicated operator construction or specialized fitting programs, the black box method shows good consistency with the traditional approaches.
hep-lat
0709.1903
RHIC physics: short overview
This talk gives a very short overview of some of the important physical phenomena observed at the Relativistic Heavy Ion Collider (RHIC). The emphasis is put on the multiplicities, hard probes and the properties of the initial state.
hep-ph
0709.1904
Electron-impact rotational and hyperfine excitation of HCN, HNC, DCN and DNC
Rotational excitation of isotopologues of HCN and HNC by thermal electron-impact is studied using the molecular {\bf R}-matrix method combined with the adiabatic-nuclei-rotation (ANR) approximation. Rate coefficients are obtained for electron temperatures in the range 5$-$6000 K and for transitions among all levels up to J=8. Hyperfine rates are also derived using the infinite-order-sudden (IOS) scaling method. It is shown that the dominant rotational transitions are dipole allowed, that is those for which $\Delta J=1$. The hyperfine propensity rule $\Delta J=\Delta F$ is found to be stronger than in the case of He$-$HCN collisions. For dipole allowed transitions, electron-impact rates are shown to exceed those for excitation of HCN by He atoms by 6 orders of magnitude. As a result, the present rates should be included in any detailed population model of isotopologues of HCN and HNC in sources where the electron fraction is larger than 10$^{-6}$, for example in interstellar shocks and comets.
astro-ph
0709.1906
Factorization of Numbers with the temporal Talbot effect: Optical implementation by a sequence of shaped ultrashort pulses
We report on the successful operation of an analogue computer designed to factor numbers. Our device relies solely on the interference of classical light and brings together the field of ultrashort laser pulses with number theory. Indeed, the frequency component of the electric field corresponding to a sequence of appropriately shaped femtosecond pulses is determined by a Gauss sum which allows us to find the factors of a number.
physics.optics
0709.1907
Consistent Treatment of Imaginary Contributions to Higgs-Boson Masses in the MSSM
We show how the imaginary parts of the Higgs-Boson self-energies in the MSSM are consistenly taken into account in the Higgs-Boson mass determination. In a numerical example we find effects of 5 GeV in the mass difference of the two heavy neutral Higgs bosons. The imaginary contributions have been included into the code FeynHiggs.
hep-ph
0709.1908
Interplay of Electroweak Precision Observables and B Physics Observables
Indirect information about the possible scale of supersymmetry (SUSY) breaking is provided by B physics observables (BPO) as well as electroweak precision observables (EWPO). We review the combination of the constraints imposed by recent measurements of the BPO BR(b -> s gamma), BR(B_s -> mu+ mu-), BR(B_u -> tau nu_tau) and Delta M_{B_s} with those obtained from the experimental measurements of the EWPO M_W, sin^2 theta_eff, Gamma_Z, (g-2)_mu and M_h. We perform a chi^2 fit to the parameters of the constrained minimal supersymmetric extension of the Standard Model (CMSSM), in which the SUSY-breaking parameters are universal at the GUT scale. Assuming that the lightest supersymmetric particle (LSP) provides the cold dark matter density preferred by WMAP and other cosmological data, we confirm the preference found previously for a relatively low SUSY-breaking scale, though there is some slight tension between the EWPO and the BPO.
hep-ph
0709.1910
Type I Non-Abelian Superconductors in Supersymmetric Gauge Theories
Non-BPS non-Abelian vortices with CP^1 internal moduli space are studied in an N=2 supersymmetric U(1) x SU(2) gauge theory with softly breaking adjoint mass terms. For generic internal orientations the classical force between two vortices can be attractive or repulsive. On the other hand, the mass of the scalars in the theory is always less than that of the vector bosons; also, the force between two vortices with the same CP^1 orientation is always attractive: for these reasons we interpret our model as a non-Abelian generalization of type I superconductors. We compute the effective potential in the limit of two well separated vortices. It is a function of the distance and of the relative colour-flavour orientation of the two vortices; in this limit we find an effective description in terms of two interacting CP^1 sigma models. In the limit of two coincident vortices we find two different solutions with the same topological winding and, for generic values of the parameters, different tensions. One of the two solutions is described by a CP^1 effective sigma model, while the other is just an Abelian vortex without internal degrees of freedom. For generic values of the parameters, one of the two solutions is metastable, while there are evidences that the other one is truly stable.
hep-th
0709.1914
Sur la persistance des courbes invariantes pour les dynamiques holomorphes fibr\'ees lisses
En s'appuyant sur un th\'eor\`me de fonctions implicites de Hamilton nous montrons la persistance d'une courbe invariante indiff\'rente pour une dynamique holomorpphe fibr\'ee en classe $C^{\infty}$. Une condition diophantienne sur la paire de nombres de rotation est demand\'ee. Nous montrons aussi que cette condition est optimale.
math.DS
0709.1917
Seeking a solution of the Pioneer Anomaly
The 1972 and 1973 launched Pioneer 10 and 11 were the first missions to explore the outer solar system. They achieved stunning breakthroughs in deep-space exploration. But around 1980 an unmodeled force of \sim 8 \times 10^{-8} cm/s^2, directed approximately towards the Sun, appeared in the tracking data. It later was unambiguously verified as not being an artifact. The origin remains unknown (although radiant heat remains a likely cause). Increasing effort has gone into understanding this anomaly. We review the situation and describe programs to resolve the issue.
gr-qc
0709.1920
Bandwidth selection for kernel estimation in mixed multi-dimensional spaces
Kernel estimation techniques, such as mean shift, suffer from one major drawback: the kernel bandwidth selection. The bandwidth can be fixed for all the data set or can vary at each points. Automatic bandwidth selection becomes a real challenge in case of multidimensional heterogeneous features. This paper presents a solution to this problem. It is an extension of \cite{Comaniciu03a} which was based on the fundamental property of normal distributions regarding the bias of the normalized density gradient. The selection is done iteratively for each type of features, by looking for the stability of local bandwidth estimates across a predefined range of bandwidths. A pseudo balloon mean shift filtering and partitioning are introduced. The validity of the method is demonstrated in the context of color image segmentation based on a 5-dimensional space.
cs.CV
0709.1921
Albedos and diameters of three Mars Trojan asteroids
We observed the Mars Trojan asteroids (5261) Eureka and (101429) 1998 VF31 and the candidate Mars Trojan 2001 FR127 at 11.2 and 18.1 microns using Michelle on the Gemini North telescope. We derive diameters of 1.28, 0.78, and <0.52 km, respectively, with corresponding geometric visible albedos of 0.39, 0.32, and >0.14. The albedos for Eureka and 1998 VF31 are consistent with the taxonomic classes and compositions (S(I)/angritic and S(VII)/achrondritic, respectively) and implied histories presented in a companion paper by Rivkin et al. Eureka's surface likely has a relatively high thermal inertia, implying a thin regolith that is consistent with predictions and the small size that we derive.
astro-ph
0709.1922
An Alternative Model for the Tidal Evolution of the Earth-Moon-Sun System
We have found that the expansion of the universe has immense consequences on our local systems. We present a model based on cosmic expansion that fits well with observation. The close approach problem inflicting tidal theory is averted in this model. We have shown that the astronomical and geological changes of our local systems are of the order of Hubble constant.
astro-ph
0709.1923
Can Inflation Induce Supersymmetry Breaking in a Metastable Vacuum?
We argue that fields responsible for inflation and supersymmetry breaking are connected by gravitational couplings. In view of the recent progress in studying supersymmetry breaking in a metastable vacuum, we have shown that in models of supersymmetric hybrid inflation, where R-symmetry plays an important role, the scale of supersymmetry breaking is generated dynamically at the end of inflation and turns out to be consistent with gravity mediation.
hep-ph
0709.1925
Composition of the L5 Mars Trojans: Neighbors, not Siblings
Mars is the only terrestrial planet known to have Tro jan (co-orbiting) asteroids, with a confirmed population of at least 4 objects. The origin of these objects is not known; while several have orbits that are stable on solar-system timescales, work by Rivkin et al. (2003) showed they have compositions that suggest separate origins from one another. We have obtained infrared (0.8-2.5 micron) spectroscopy of the two largest L5 Mars Tro jans, and confirm and extend the results of Rivkin et al. (2003). We suggest that the differentiated angrite meteorites are good spectral analogs for 5261 Eureka, the largest Mars Trojan. Meteorite analogs for 101429 1998 VF31 are more varied and include primitive achondrites and mesosiderites.
astro-ph
0709.1926
Distances to Galactic high-velocity clouds. I. Cohen Stream, complex GCP, cloud g1
The high- and intermediate-velocity interstellar clouds (HVCs/IVCs) are tracers of energetic processes in and around the Milky Way. Clouds with near-solar metallicity about one kpc above the disk trace the circulation of material between disk and halo (the Galactic Fountain). The Magellanic Stream consists of gas tidally extracted from the SMC, tracing the dark matter potential of the Milky Way. Several other HVCs have low-metallicity and appear to trace the continuing accretion of infalling intergalactic gas. These assertions are supported by the metallicities (0.1 to 1 solar) measured for about ten clouds in the past decade. Direct measurements of distances to HVCs have remained elusive, however. In this paper we present four new distance brackets, using VLT observations of interstellar \CaII H and K absorption toward distant Galactic halo stars. We derive distance brackets of 5.0 to 11.7 kpc for the Cohen Stream (likely to be an infalling low-metallicity cloud), 9.8 to 15.1 kpc for complex GCP (also known as the Smith Cloud or HVC40-15+100 and with still unknown origin), 1.0 to 2.7 kpc for an IVC that appears associated with the return flow of the Fountain in the Perseus Arm, and 1.8 to 3.8 kpc for cloud g1, which appears to be in the outflow phase of the Fountain. Our measurements further demonstrate that the Milky Way is accreting substantial amounts of gaseous material, which influences the Galaxy's current and future dynamical and chemical evolution.
astro-ph
0709.1931
Axion-Dilaton Cosmology and Dark Energy
We discuss a class of flat FRW cosmological models based on D=4 axion-dilaton gravity universally coupled to cosmological background fluids. In particular, we investigate the possibility of recurrent acceleration, which was recently shown to be generically realized in a wide class of axion-dilaton models, but in absence of cosmological background fluids. We observe that, once we impose the existence of radiation -and matter- dominated earlier stages of cosmic evolution, the axion-dilaton dynamics is altered significantly with respect to the case of pure axion-dilaton gravity. During the matter dominated epoch the scalar fields remain either frozen, due to the large expansion rate, or enter a cosmological scaling regime. In both cases, oscillations of the effective equation of state around the acceleration boundary value are impossible. Models which enter an oscillatory stage in the low redshift regime, on the other hand, are disfavored by observations. We also comment on the viability of the axion-dilaton system as a candidate for dynamical dark energy. In a certain subclass of models, an intermediate scaling regime is succeeded by eternal acceleration. We also briefly discuss the issue of dependence on initial conditions.
hep-ph
0709.1932
Heterotic String Compactifications on Half-flat Manifolds II
In this paper, we continue the analysis of heterotic string compactifications on half-flat mirror manifolds by including the 10-dimensional gauge fields. It is argued, that the heterotic Bianchi identity is solved by a variant of the standard embedding. Then, the resulting gauge group in four dimensions is still E6 despite the fact that the Levi-Civita connection has SO(6) holonomy. We derive the associated four-dimensional effective theories including matter field terms for such compactifications. The results are also extended to more general manifolds with SU(3) structure.
hep-th
0709.1933
Relativistic dynamics of cylindrical shells of counter-rotating particles
Although infinite cylinders are not astrophysical entities, it is possible to learn a great deal about the basic qualitative features of generation of gravitational waves and the behavior of the matter conforming such shells in the limits of very small radius. We describe the analytical model using kinetic theory for the matter and the junction conditions through the shell to obtain its equation of motion. The nature of the static solutions are analyzed, both for a single shell as well as for two concentric shells. In this second case, for a time dependent external shell, we integrate numerically the equation of motion for several values of the constants of the system. Also, a brief description in terms of the Komar mass is given to account for the gravitational wave energy emitted by the system.
gr-qc
0709.1935
Clique-width of unit interval graphs
The clique-width is known to be unbounded in the class of unit interval graphs. In this paper, we show that this is a minimal hereditary class of unbounded clique-width, i.e., in every hereditary subclass of unit interval graphs the clique-width is bounded by a constant.
math.CO
0709.1936
On the Reduction Process of Nucci-Reduce Algorithm for Computing Nonlocal Symmetries of Dynamical Systems:A case study of the Kepler and Kepler-related problems
The snags in Nucci(1996)REDUCE algorithm are the intrinsic computational efforts and the ability to recognize the ignorable variable(s) during the reduction process of the algorithm. An inappropriate choice of the ignorable variable(s)may lead to an infinite loop. We construct an isomorphic transformation which ameliorates these problems, and with which a simple, definite steps of algebraic process, produced equivalent system of equations to that of Nucci that are easily solved by Lie point symmetry algorithm.
math.DS
0709.1939
Non-local interactions in hydrodynamic turbulence at high Reynolds numbers: the slow emergence of scaling laws
We analyze the data stemming from a forced incompressible hydrodynamic simulation on a grid of 2048^3 regularly spaced points, with a Taylor Reynolds number of Re~1300. The forcing is given by the Taylor-Green flow, which shares similarities with the flow in several laboratory experiments, and the computation is run for ten turnover times in the turbulent steady state. At this Reynolds number the anisotropic large scale flow pattern, the inertial range, the bottleneck, and the dissipative range are clearly visible, thus providing a good test case for the study of turbulence as it appears in nature. Triadic interactions, the locality of energy fluxes, and structure functions of the velocity increments are computed. A comparison with runs at lower Reynolds numbers is performed, and shows the emergence of scaling laws for the relative amplitude of local and non-local interactions in spectral space. The scalings of the Kolmogorov constant, and of skewness and flatness of velocity increments, performed as well and are consistent with previous experimental results. Furthermore, the accumulation of energy in the small-scales associated with the bottleneck seems to occur on a span of wavenumbers that is independent of the Reynolds number, possibly ruling out an inertial range explanation for it. Finally, intermittency exponents seem to depart from standard models at high Re, leaving the interpretation of intermittency an open problem.
physics.flu-dyn
0709.1940
Cosmological perturbations from stochastic gravity
In inflationary cosmological models driven by an inflaton field the origin of the primordial inhomogeneities which are responsible for large scale structure formation are the quantum fluctuations of the inflaton field. These are usually computed using the standard theory of cosmological perturbations, where both the gravitational and the inflaton fields are linearly perturbed and quantized. The correlation functions for the primordial metric fluctuations and their power spectrum are then computed. Here we introduce an alternative procedure for computing the metric correlations based on the Einstein-Langevin equation which emerges in the framework of stochastic semiclassical gravity. We show that the correlation functions for the metric perturbations that follow from the Einstein-Langevin formalism coincide with those obtained with the usual quantization procedures when the scalar field perturbations are linearized. This method is explicitly applied to a simple model of chaotic inflation consisting of a Robertson-Walker background, which undergoes a quasi-de-Sitter expansion, minimally coupled to a free massive quantum scalar field. The technique based on the Einstein-Langevin equation can, however, deal naturally with the perturbations of the scalar field even beyond the linear approximation, as is actually required in inflationary models which are not driven by an inflaton field such as Starobinsky's trace-anomaly driven inflation or when calculating corrections due to non-linear quantum effects in the usual inflaton driven models.
gr-qc
0709.1943
On the origin of complex stellar populations in star clusters
The existence of complex stellar populations in some star clusters challenges the understanding of star formation. E.g. the ONC or the sigma Orionis cluster host much older stars than the main bulk of the young stars. Massive star clusters (omega Cen, G1, M54) show metallicity spreads corresponding to different stellar populations with large age gaps. We show that (i) during star cluster formation field stars can be captured and (ii) very massive globular clusters can accrete gas from a long-term embedding inter stellar medium and restart star formation.
astro-ph
0709.1945
Re-born fireballs in Gamma-Ray Bursts
We consider the interaction between a relativistic fireball and material assumed to be still located just outside the progenitor star. Only a small fraction of the expected mass is sufficient to efficiently decelerate the fireball, leading to dissipation of most of its kinetic energy. Since the scattering optical depths are still large at distances comparable to the progenitor radius, the dissipated energy is trapped in the system, accelerating it to relativistic velocities. The process resembles the birth of another fireball at radii R~1e11 cm, not far from the transparency radius, and with a starting bulk Lorentz factors Gamma_c~10. As seen in the observer frame, this "re--generated" fireball appears collimated within an angle theta_j=1/Gamma_c. If the central engine works intermittently, the funnel can, at least partially, refill and the process can repeat itself. We discuss how this idea can help solving some open issues of the more conventional internal shock scenario for interpreting the Gamma-Ray Burst properties.
astro-ph
0709.1949
Constructing Textures in Extended Quark-Lepton Complementarity
We systematically construct an extensive list of realistic mass matrix textures for leptons. For this set of matrices, we discuss the parameter space, and illustrate how these textures could be generated in explicit models from flavor symmetries.
hep-ph
0709.1954
Bessel potentials and optimal Hardy and Hardy-Rellich inequalities
We give necessary and sufficient conditions on a pair of positive radial functions V and W on a ball B of radius R in R^n,$n \geq 1$, so that the following inequalities hold for all $u \in C_{0}^{\infty}(B)$: $\int_{B}V(x)|\nabla u |^{2}dx \geq \int_{B} W(x)u^2dx$, and $\int_{B}V(x)|\Delta u |^{2}dx \geq \int_{B} W(x)|\nabla u|^{2}dx+(n-1)\int_{B}(\frac{V(x)}{|x|^2}-\frac{V_r(|x|)}{|x|})|\nabla u|^2dx$. This characterization makes a very useful connection between Hardy-type inequalities and the oscillatory behaviour of certain ordinary differential equations, and helps in the identification of a large number of such couples (V, W) - that we call Bessel pairs -as well as the best constants in the corresponding inequalities. This allows us to improve, extend, and unify many results -old and new- about Hardy and Hardy-Rellich type inequalities, such as those obtained by Caffarelli-Kohn-Nirenberg, Brezis-Vazquez, Wang-Willem, Adimurthi-Chaudhuri-Ramaswamy, Filippas-Tertikas, Adimurthi-Grossi -Santra, Tertikas-Zographopoulos, and Blanchet-Bonforte-Dolbeault-Grillo-Vasquez.
math.AP
0709.1958
Bloch-Siegert shift for multiphoton resonances
Recently there has been theoretical and experimental interest in Bloch-Siegert shifts in an intense photon field. A perturbative treatment becomes difficult in this multiphoton regime. We present a unitary transform and rotated model, which allows us to get accurate results away from the level anticrossings. A simple variational energy estimate leads to a new expression for the dressed two-level system energy which is accurate, and useful over a wide range of the dimensionless coupling constant.
quant-ph
0709.1959
The use of genetic algorithm to model protoplanetary discs
The protoplanetary discs of T Tauri and Herbig Ae/Be stars have been studied by using geometric disc models to fit their spectral energy distribution (SED). The simulations provide means to reproduce the signatures of different circumstellar structures, which are related to different levels of infrared excess. Aiming to improve our previous model that assumed a simple flat disc configuration, in the present work we adopt a reprocessing flared disc model that considers hydrostatic, radiative equilibrium (Dullemond et al. 2001). We developed a method to optimise the parameters estimation based on genetic algorithms (GA). This paper is dedicated to describe the implementation of the new code, which has been applied for Herbig stars from the Pico dos Dias Survey catalogue, in order to illustrate the quality of the fitting for a variety of SED shapes. The star AB Aur was used as a test of the GA parameters estimation, demonstrating that the new code reproduces successfully a canonical example of the flared disc model. The GA method gives good quality of fittings, but the range of input parameters must be chosen with caution, since unrealistic disc parameters can be derived. The flared disc model is confirmed to fit the flattened SEDs typical from Herbig stars, however the embedded objects (increasing SED slope) and debris discs (steeper SED) are not well fitted with this configuration. Even considering the limitation of the derived parameters, the automatic process of SED fitting provides an interesting tool for the statistical analysis of the circumstellar luminosity of large samples of young stars.
astro-ph
0709.1960
W-pair production in Unparticle Physics
We consider the $W$-pair production for both $e^+e^-$ and hadron colliders in the context of unparticle physics associated with the scale invariant sector proposed by Georgi. We have shown that the unparticle contributions are quite comparable with standard model (SM) specially for low values of non-integral scaling dimension $ (d_{\cal U}) $ and hence it is worthwhile to explore in future colliders.
hep-ph
0709.1961
Level Splitting in Association with the Multiphoton Bloch-Siegert Shift
We present a unitary equivalent spin-boson Hamiltonian in which terms can be identified which contribute to the Bloch-Siegert shift, and to the level splittings at the anticrossings associated with the Bloch-Siegert resonances. First-order degenerate perturbation theory is used to develop approximate results in the case of moderate coupling for the level splitting.
quant-ph
0709.1962
An investigation of the origin of soft X-ray excess emission from Narrow-line Seyfert 1 galaxies Akn564 and Mrk1044
We investigate the origin of the soft X-ray excess emission from narrow-line Seyfert 1 galaxies Akn564 and Mrk1044 using XMM-Newton observations. We find clear evidence for time delays between the soft and hard X-ray emission from Akn564 based on a 100ks long observation. The variations in the 4-10keV band lag behind that in the 0.2-0.5keV band by 1768+/-122s. The full band power density spectrum (PDS) of Akn~564 has a break at ~1.2e-3Hz with power-law indices of ~1 and ~3 below and above the break. The hard (3-10keV) band PDS is stronger and flatter than that in the soft (0.2-0.5keV) band. Based on a short observation of Mrk1044, we find no correlation between the 0.2-0.3keV and 5-10keV bands at zero lag. These observations imply that the soft excess is not the reprocessed hard X-ray emission. The high resolution spectrum of Akn564 obtained with the RGS shows evidence for a highly ionized and another weakly ionized warm absorber medium. The smeared wind and blurred ionized reflection models do not describe the pn data adequately. The spectrum is consistent with a complex model consisting of optically thick Comptonization in a cool plasma for the soft excess and a steep power-law, modified by two warm absorber media as inferred from the RGS data and the foreground Galactic absorption. The smeared wind and optically thick Comptonization models both describe the spectrum of Mrk1044 satisfactorily, but the ionized reflection model requires extreme parameters. The data suggest two component corona -- a cool, optically thick corona for the soft excess and a hot corona for the power-law component. The existence of a break in the soft band PDS suggests a compact cool corona that can either be an ionized surface of the inner disk or an inner optically thick region coupled to a truncated disk.
astro-ph
0709.1963
Double Coronal Hard and Soft X-ray Source Observed by RHESSI: Evidence for Magnetic Reconnection and Particle Acceleration in Solar Flares
We present data analysis and interpretation of an M1.4-class flare observed with the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) on April 30, 2002. This event, with its footpoints occulted by the solar limb, exhibits a rarely observed, but theoretically expected, double-source structure in the corona. The two coronal sources, observed over the 6-30 keV range, appear at different altitudes and show energy-dependent structures with the higher-energy emission being closer together. Spectral analysis implies that the emission at higher energies in the inner region between the two sources is mainly nonthermal, while the emission at lower energies in the outer region is primarily thermal. The two sources are both visible for about 12 minutes and have similar light curves and power-law spectra above about 20 keV. These observations suggest that the magnetic reconnection site lies between the two sources. Bi-directional outflows of the released energy in the form of turbulence and/or particles from the reconnection site can be the source of the observed radiation. The spatially resolved thermal emission below about 15 keV, on the other hand, indicates that the lower source has a larger emission measure but a lower temperature than the upper source. This is likely the result of the differences in the magnetic field and plasma density of the two sources.
astro-ph
0709.1964
Globular Cluster Abundances from High-Resolution Integrated Light Spectra, I: 47 Tuc
We describe the detailed chemical abundance analysis of a high-resolution (R~35,000), integrated-light (IL), spectrum of the core of the Galactic globular cluster 47 Tuc, obtained using the du Pont echelle at Las Campanas. We develop an abundance analysis strategy that can be applied to spatial unresolved extra- galactic clusters. We have computed abundances for Na, Mg, Al, Si, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Y, Zr, Ba, La, Nd and Eu. For an analysis with the known color-magnitude diagram (cmd) for 47 Tuc we obtain a mean [Fe/H] value of -0.75 +/-0.026+/-0.045 dex (random and systematic error), in good agreement with the mean of 5 recent high resolution abundance studies, at -0.70 dex. Typical random errors on our mean [X/Fe] ratios are 0.07-0.10 dex, similar to studies of individual stars in 47 Tuc, although Na and Al appear enhanced, perhaps due to proton burning in the most luminous cluster stars. Our IL abundance analysis with an unknown cmd employed theoretical Teramo isochrones; however, we apply zero-point abundance corrections to account for the factor of 3 underprediction of stars at the AGB bump luminosity. While line diagnostics alone provide only mild constraints on the cluster age (ruling-out ages younger than ~2 Gyr), when theoretical IL B-V colors are combined with metallicity derived from the Fe I lines, the age is constrained to 10--15 Gyr and we obtain [Fe/H]=-0.70 +/-0.021 +/-0.052 dex. We find that Fe I line diagnostics may also be used to constrain the horizontal branch morphology of an unresolved cluster. Lastly, our spectrum synthesis of 5.4 million TiO lines indicates that the 7300-7600A TiO window should be useful for estimating the effect of M giants on the IL abundances, and important for clusters more metal-rich than 47 Tuc.
astro-ph
0709.1966
The velocity distribution of SDSS satellites in MOND
The recent SDSS measured velocity distribution of satellite galaxies has been modelled in the context of MOND. We show that even when the extra constraint of adhering to the projected satellite number density profile is added, the two line of sight (los) velocity dispersion profiles presented in Klypin & Prada (2007) can be matched simply with a radially varying anisotropy. Interestingly, the anisotropies required to fit the los velocity dispersions are remarkably similar to the anisotropies generated by dissipationless collapse simulations in MOND. The mass-to-light ratios of the two host galaxies used are sensible and positivity of the distribution function is satisfied.
astro-ph
0709.1967
Enabling Rapid Development of Parallel Tree Search Applications
Virtual observatories will give astronomers easy access to an unprecedented amount of data. Extracting scientific knowledge from these data will increasingly demand both efficient algorithms as well as the power of parallel computers. Nearly all efficient analyses of large astronomical datasets use trees as their fundamental data structure. Writing efficient tree-based techniques, a task that is time-consuming even on single-processor computers, is exceedingly cumbersome on massively parallel platforms (MPPs). Most applications that run on MPPs are simulation codes, since the expense of developing them is offset by the fact that they will be used for many years by many researchers. In contrast, data analysis codes change far more rapidly, are often unique to individual researchers, and therefore accommodate little reuse. Consequently, the economics of the current high-performance computing development paradigm for MPPs does not favor data analysis applications. We have therefore built a library, called Ntropy, that provides a flexible, extensible, and easy-to-use way of developing tree-based data analysis algorithms for both serial and parallel platforms. Our experience has shown that not only does our library save development time, it can also deliver excellent serial performance and parallel scalability. Furthermore, Ntropy makes it easy for an astronomer with little or no parallel programming experience to quickly scale their application to a distributed multiprocessor environment. By minimizing development time for efficient and scalable data analysis, we enable wide-scale knowledge discovery on massive datasets.
astro-ph
0709.1969
Time lags in Narrow-line Seyfert 1 galaxies and the origin of their soft excess emission
The origin of soft X-ray excess emission from type 1 active galactic nuclei has remained a major problem for the last two decades. It has not been possible to distinguish alternative models for the soft excess emission despite the excellent data quality provided by XMM-Newton and Chandra. Here we present observations of time lags between the soft and hard band X-ray emission and discuss the implications to the models for the soft excess. We also device a method to distinguish the models for the soft excess using Suzaku's broadband capability.
astro-ph
0709.1970
Some new directions in p-adic Hodge theory
We recall some basic constructions from p-adic Hodge theory, then describe some recent results in the subject. We chiefly discuss the notion of B-pairs, introduced recently by Berger, which provides a natural enlargement of the category of p-adic Galois representations. (This enlargement, in a different form, figures in recent work of Colmez, Bellaiche, and Chenevier on trianguline representations.) We also discuss results of Liu that indicate that the formalism of Galois cohomology, including Tate local duality, extends to B-pairs.
math.NT
0709.1972
The Effect of the Interstellar Model on Star Formation Properties in Galactic Disks
We studied the effect of interstellar gas conditions on global galaxy simulations by considering three different models for the ISM. Our first model included only radiative cooling down to 300 K, our second model added an additional background heating term due to photoelectric heating, and our third model uses an isothermal equation of state with a temperature of 10^4 K and no explicit heating or cooling. Two common prescriptions for star formation are implemented in each case. The first is based on cosmological simulations with a low threshold for star formation but also a low efficiency. The second assumes stars form only in high density regions but with a higher efficiency. We also explore the effects of including feedback from type II supernovae. We find that the different ISM types produce marked differences in the structure of the disk and temperature phases present in the gas, although inclusion of feedback largely dominates these effects. In particular, size of the star-forming clumps was increased both by background heating and by enforcing an isothermal ISM. We also looked at the one dimensional profiles and found that a lognormal PDF provides a good fit for all our simulations over several orders of magnitude in density. Overall, despite noticeable structural differences, the star formation properties in the disk are largely insensitive to ISM type and agree reasonably well with observations.
astro-ph
0709.1976
Fluctuations in Nonequilibrium Statistical Mechanics: Models, Mathematical Theory, Physical Mechanisms
The fluctuations in nonequilibrium systems are under intense theoretical and experimental investigation. Topical ``fluctuation relations'' describe symmetries of the statistical properties of certain observables, in a variety of models and phenomena. They have been derived in deterministic and, later, in stochastic frameworks. Other results first obtained for stochastic processes, and later considered in deterministic dynamics, describe the temporal evolution of fluctuations. The field has grown beyond expectation: research works and different perspectives are proposed at an ever faster pace. Indeed, understanding fluctuations is important for the emerging theory of nonequilibrium phenomena, as well as for applications, such as those of nanotechnological and biophysical interest. However, the links among the different approaches and the limitations of these approaches are not fully understood. We focus on these issues, providing: a) analysis of the theoretical models; b) discussion of the rigorous mathematical results; c) identification of the physical mechanisms underlying the validity of the theoretical predictions, for a wide range of phenomena.
cond-mat.stat-mech
0709.1978
On proofs of certain combinatorial identities
In this paper we formulate combinatorial identities that give representation of positive integers as linear combination of even powers of 2 with binomial coefficients. We present side by side combinatorial as well as computer generated proofs using the Wilf-Zeilberger(WZ) method.
math.NT
0709.1979
K3 surfaces of finite height over finite fields
Arithmetic of K3 surfaces defined over finite fields is investigated. In particular, we show that any K3 surface of finite height over a finite field k of characteristic p > 3 has a quasi-canonical lifting to characteristic 0, and that for any such lifting, the endormorphism algebra of the transcendental cycles, as a Hodge module, is a CM field. The Tate conjecture for the product of certain two K3 surfaces is also proved. We illustrate by examples how to determine explicitly the formal Brauer group associated to a K3 surface over k. Examples discussed here are all of hypergeometric type.
math.AG
0709.1982
Entanglement detection via condition of quantum correlation
We develop a novel necessary condition of quantum correlation. It is utilized to construct $d$-level bipartite Bell-type inequality which is strongly resistant to noise and requires only analyses of $O(d)$ measurement outcomes compared to the previous result $O(d^{2})$. Remarkably, a connection between the arbitrary high-dimensional bipartite Bell-type inequality and entanglement witnesses is found. Through the necessary condition of quantum correlation, we propose that the witness operators to detect truly multipartite entanglement for a generalized Greenberger-Horne-Zeilinger (GHZ) state with two local measurement settings and a four-qubit singlet state with three settings. Moreover, we also propose the first robust entanglement witness to detect four-level tripartite GHZ state with only two local measurement settings.
quant-ph
0709.1983
Improvement on Parameters of Algebraic-Geometry Codes from Hermitian Curves
Motivated by Xing's method [7], we show that there exist [n,k,d] linear Hermitian codes over F_{q^2} with k+d>=n-3 for all sufficiently large q. This improves the asymptotic bound of Algebraic-Geometry codes from Hermitian curves given in [9,10].
math.AG
0709.1984
Constraints on light bending and reflection from the hard X-ray background
Light bending due to strong gravity has recently been invoked to explain variability and flux correlations between different bands in some accreting black holes. A characteristic feature of light bending is reflection-dominated spectra, especially if photon sources lie in the deepest parts of the gravitational potential within a few gravitational radii of the event horizon. We use the spectrum of the hard X-ray background in order to constrain the prevalence of such reflection-dominated sources. We first emphasize the need for reflection and explore the broad-band properties of realistic spectra that incorporate light bending. We then use these spectra, in conjunction with the observed 2-10 keV AGN distribution, evolutionary and obscuration functions in order to predict the hard X-ray background spectrum over 3-100 keV, and provide limits on the fraction of reflection-dominated objects, dependent on the height of the photon sources. Our results allow for a cosmologically-significant fraction of sources that incorporate strong light bending. The luminosity function based on intrinsic flare luminosities is derived and implications discussed. We discuss prospects for future hard X-ray missions such as NeXT and Simbol-X that can image such sources as well as confirm the precise spectral shape of the background near its peak, important for constraining the universal relevance of light bending.
astro-ph
0709.1985
On Kummer type construction of supersingular K3 surfaces in characteristic 2
We show that every supersingular K3 surface in characteristic 2 with Artin invariant less than or equal to 2 is obtained by the Kummer type construction of Schroeer.
math.AG
0709.1989
Influence of Mg Deficiency on the Superconductivity in MgB2 Thin Films Grown by using HPCVD
The effects of Mg deficiency in MgB2 films grown by using hybrid physical-chemical vapor deposition were investigated after vacuum annealing at various temperatures. High-quality MgB2 films grown on c-cut Al2O3 substrates with different superconducting transition temperatures (Tc) of 40.2 and 41 K were used in this study. As the annealing temperature was increased from 200 to 800 C, the Mg contents in the MgB2 films systemically decreased, but the Tc's did not change, within 0.12 K, until the annealing temperature reached 700 C. For MgB2 films annealed at 800 C for 30 min, however, no superconductivity was observed, and the temperature dependence of the resistivity showed a semiconducting behavior. We also found that the residual resistivity ratio decreased with increasing annealing temperature.
cond-mat.supr-con
0709.1990
An ATCA 20cm Radio Continuum Study of the Large Magellanic Cloud
We present a mosaic image of the 1.4GHz radio continuum emission from the Large Magellanic Cloud (LMC) observed with the Australia Telescope Compact Array (ATCA) and the Parkes Telescope. The mosaic covers 10.8 x 12.3 square degrees with an angular resolution of 40", corresponding to a spatial scale of 10pc in the LMC. The final image is suitable for studying emission on all scales between 40" and the surveyed area. In this paper, we discuss i) the characteristics of the LMC's diffuse and compact radio continuum emission, ii) the fraction of the emission produced by thermal processes and the implied star formation rate in the LMC, and iii) variations in the radio spectral index across the LMC. Two non-standard reduction techniques that we used to process the ATCA visibility data may be of interest for future wide-field radio continuum surveys. The data are open to the astronomical community and should be a rich resource for studies of individual objects such as supernova remnants, HII regions and planetary nebulae, as well as extended features such as the diffuse emission from synchrotron radiation.
astro-ph