question
stringlengths 14
180
| context
stringlengths 6
306
| answer
stringlengths 59
470
|
|---|---|---|
allow the device connected to port ge-0/0/0 to have a static IP address in Juniper ex3300 switch
|
set ethernet-switching-options secure-access-port interface <interface-name> dhcp-trusted
|
Use the following command in the configuration mode:
set ethernet-switching-options secure-access-port interface ge-0/0/0 dhcp-trusted
commit
|
enable the device connected to port ge-0/0/7 to have a static IP address in Juniper ex3300 switch
|
set ethernet-switching-options secure-access-port interface <interface-name> dhcp-trusted
|
Use the following command in the configuration mode:
set ethernet-switching-options secure-access-port interface ge-0/0/7 dhcp-trusted
commit
|
set port ge-1/0/5 as dhcp-trusted
|
set ethernet-switching-options secure-access-port interface <interface-name> dhcp-trusted
|
Use the following command in the configuration mode:
set ethernet-switching-options secure-access interface ge-1/0/5 dhcp-trusted
commit
|
set port ge-1/0/5 as dhcp-trusted
|
set ethernet-switching-options secure-access-port interface <interface-name> dhcp-trusted
|
Use the following command in the configuration mode:
set ethernet-switching-options secure-access interface ge-1/0/5 dhcp-trusted
commit
|
How to set an interface as dhcp trusted on Juniper ex3300 switch
|
set ethernet-switching-options secure-access-port interface <interface-name> dhcp-trusted
|
Use the following command in the configuration mode:
set ethernet-switching-options secure-access interface <interface-name> dhcp-trusted
commit
|
allow the assignment of static ip address on ge-0/0/10
|
set ethernet-switching-options secure-access-port interface <interface-name> dhcp-trusted
|
Use the following command in the configuration mode:
set ethernet-switching-options secure-access-port interface ge-0/0/10 dhcp-trusted
commit
|
allow the assignment of static ip address on ge-0/0/11
|
set ethernet-switching-options secure-access-port interface <interface-name> dhcp-trusted
|
Use the following command in the configuration mode:
set ethernet-switching-options secure-access-port interface ge-0/0/11 dhcp-trusted
commit
|
enable the assignment of static ip address on ge-1/0/11
|
set ethernet-switching-options secure-access-port interface <interface-name> dhcp-trusted
|
Use the following command in the configuration mode:
set ethernet-switching-options securee-access-port interface ge-1/0/11 dhcp-trusted
commit
|
Let interface ge-0/0/5 bypass IP source guard inspection
|
set ethernet-switching-options secure-access-port interface <interface-name> dhcp-trusted
|
Use the following command in the configuration mode:
set ethernet-switching-options secure-access-port interface ge-0/0/5 dhcp-trusted
commit
|
How to make an interface bypass IP source guard inspection
|
set ethernet-switching-options secure-access-port interface <interface-name> dhcp-trusted
|
Use the following command in the configuration mode:
set ethernet-switching-options secure-access-port interface <interface-name> dhcp-trusted
commit
|
How to disable the IP source guard inspection on a specific interface
|
set ethernet-switching-options secure-access-port interface <interface-name> dhcp-trusted
|
Use the following command in the configuration mode:
set ethernet-switching-options secure-access-port interface <interface-name> dhcp-trusted
commit
|
Disable IP source guard inspection on interface ge-0/0/15
|
set ethernet-switching-options secure-access-port interface <interface-name> dhcp-trusted
|
Use the following command in the configuration mode:
set ethernet-switching-options secure-access-port interface ge-0/0/15 dhcp-trusted
commit
|
Allow device connected to the interface range CAM-RANGE to have static IP addresses
|
set ethernet-switching-options secure-access-port interface <range-name> dhcp-trusted
|
Use the following command in the configuration mode:
set ethernet-switching-options secure-access-port interface CAM-RANGE dhcp-trusted
commit
|
Allow DHCP responses from interface ge-1/0/8
|
set ethernet-switching-options secure-access-port interface <range-name> dhcp-trusted
|
Use the following command in the configuration mode:
set ethernet-switching-options secure-access-port interface ge-1/0/8 dhcp-trusted
commit
|
Deny DHCP responses from interface ge-1/0/18
|
set ethernet-switching-options secure-access-port interface <range-name> no-dhcp-trusted
|
Use the following command in the configuration mode:
set ethernet-switching-options secure-access-port interface ge-1/0/18 no-dhcp-trusted
commit
|
set the dhcp-trusted feature on the interface range TRUSTED-RANGE
|
set ethernet-switching-options secure-access-port interface <range-name> dhcp-trusted
|
Use the following command in the configuration mode:
set ethernet-switching-options secure-access-port interface TRUSTED-RANGE dhcp-trusted
commit
|
delete the dhcp-trusted feature on the interface range TRUSTED-RANGE
|
delete ethernet-switching-options secure-access-port interface <range-name> dhcp-trusted
|
Use the following command in the configuration mode:
delete ethernet-switching-options secure-access-port interface TRUSTED-RANGE dhcp-trusted
commit
|
set the no-dhcp-trusted feature on the interface range WIRELESS-RANGE
|
set ethernet-switching-options secure-access-port interface <interface-name> no-dhcp-trusted
|
Use the following command in the configuration mode:
set ethernet-switching-options secure-access-port interface WIRELESS-RANGE no-dhcp-trusted
commit
|
create a new vlan
|
set vlans <vlan-name> vlan-id <vlan-id-number>
|
Use the following command in the configuration mode:
set vlans <vlan-name> vlan-id <vlan-id-number>
commit
|
how to create a new vlan
|
set vlans <vlan-name> vlan-id <vlan-id-number>
|
Use the following command in the configuration mode:
set vlans <vlan-name> vlan-id <vlan-id-number>
commit
|
create a new vlan with the name HR and vlan-id 10
|
set vlans <vlan-name> vlan-id <vlan-id-number>
|
Use the following command in the configuration mode:
set vlans HR vlan-id 10
commit
|
create a new vlan with the name FIN and vlan-id 11
|
set vlans <vlan-name> vlan-id <vlan-id-number>
|
Use the following command in the configuration mode:
set vlans FIN vlan-id 11
commit
|
set the interface ge-1/0/2 in the vlan Data
|
set interfaces <interface-name> unit <unit-number> family ethernet-switching port-mode access vlan members <vlan-name-or-id>
|
Use the following command in the configuration mode:
set interfaces ge-1/0/2 unit 0 family ethernet-switching port-mode access vlan members Data
commit
|
how to make an interface a member of a specific vlan
|
set interfaces <interface-name> unit <unit-number> family ethernet-switching port-mode access vlan members <vlan-name-or-id>
|
Use the following command in the configuration mode:
set interfaces <interface-name> unit <unit-number> family ethernet-switching port-mode access vlan members <vlan-name-or-id>
commit
|
how to assign an interface to a vlan
|
set interfaces <interface-name> unit <unit-number> family ethernet-switching port-mode access vlan members <vlan-name-or-id>
|
Use the following command in the configuration mode:
set interfaces <interface-name> unit <unit-number> family ethernet-switching port-mode access vlan members <vlan-name-or-id>
commit
|
make the interface ge-1/0/12 a member in the vlan FIN
|
set interfaces <interface-name> unit <unit-number> family ethernet-switching port-mode access vlan members <vlan-name-or-id>
|
Use the following command in the configuration mode:
set interfaces ge-1/0/12 unit 0 family ethernet-switching port-mode access vlan members FIN
commit
|
configure a data vlan with id 10 on juniper ex3300 switch and assign it to the following ports ge-0/0/0, ge-0/0/1, and ge-0/0/3
|
set vlans <vlan-name> <vlan-id>
set interfaces <interface-name> unit <unit-number> family ethernet-switching port-mode access vlan members <vlan-name-or-id>
|
Use the following commands in the configuration mode:
set vlans data vlan-id 10
set interfaces ge-0/0/0 unit 0 family ethernet-switching port-mode access vlan members 10
set interfaces ge-0/0/1 unit 0 family ethernet-switching port-mode access vlan members 10
set interfaces ge-0/0/3 unit 0 family ethernet-switching port-mode access vlan members 10
commit
|
configure a data vlan with vlan-id 100 on juniper ex3300 switch and make the following interfaces ge-0/0/20, ge-0/0/11, and ge-0/0/13 members of the data vlan
|
set vlans <vlan-name> <vlan-id>
set interfaces <interface-name> unit <unit-number> family ethernet-switching port-mode access vlan members <vlan-name-or-id>
|
Use the following commands in the configuration mode:
set vlans data vlan-id 100
set interfaces ge-0/0/20 unit 0 family ethernet-switching port-mode access vlan members 100
set interfaces ge-0/0/11 unit 0 family ethernet-switching port-mode access vlan members 100
set interfaces ge-0/0/13 unit 0 family ethernet-switching port-mode access vlan members 100
commit
|
port ge-0/0/0 is the uplink to another EX3300 switch that has the following vlans 10,20, 30 put the required configuration on this port, given that RSTP is enabled on both switches
|
set vlans <vlan-name> vlan-id <vlan-id>
set interfaces <interface-name> unit <unit-number> family ethernet-switching port-mode trunk vlan members <vlan-name-or-id>
set protocols rstp interface <interface-name> mode point-to-point
|
Use the following commands in the configuration mode:
set vlans VLAN10 vlan-id 10
set vlans VLAN20 vlan-id 20
set vlans VLAN30 vlan-id 30
set interfaces ge-0/0/0 unit 0 family ethernet-switching port-mode trunk vlan members 10
set interfaces ge-0/0/0 unit 0 family ethernet-switching port-mode trunk vlan members 20
set interfaces ge-0/0/0 unit 0 family ethernet-switching port-mode trunk vlan members 30
set protocols rstp interface ge-0/0/0 mode point-to-point
commit
|
I have a camera and I want to assign it a static IP and include it in the CAMERA vlan. The camera is connected to port ge-0/0/9
|
set vlans <vlan-name> vlan-id <vlan-id>
set interfaces <interface-name> unit <unit-number> family ethernet-switching port-mode access vlan members <vlan-id-or-name>
set ethernet-switching-options secure-access-port interface <interface-name> dhcp-trusted
|
Use the following commands in the configuration mode:
set vlans CAMERA vlan-id <vlan-id>
set interfaces ge-0/0/9 unit 0 family ethernet-switching port-mode access vlan members CAMERA
set ethernet-switching-options secure-access-port interface ge-0/0/9 dhcp-trusted
commit
|
how to tag the default vlan with vlan id of 100
|
set vlans default vlan-id <id>
|
Use the following command in the configuration mode:
set vlans default vlan-id 100
commit
|
define the l3 interface of the HR VLAN as vlan.2010
|
set vlans <vlan-name> l3-interface <vlan.unit-number>
|
Use the following command in the configuration mode:
set vlans HR l3-interface vlan.2010
commit
|
set the l3 interface of the IT_DEP vlan to vlan.3010
|
set vlans <vlan-name> l3-interface <vlan.unit-number>
|
Use the following command in the configuration mode:
set vlans IT_DEP l3-interface vlan.3010
commit
|
How to create l3 interface of a vlan
|
set vlans <vlan-name> l3-interface <vlan.unit-number>
|
Use the following command in the configuration mode:
set vlans <vlan-name> l3-interface <vlan.unit-number>
commit
|
How to set an l3 interface for a vlan
|
set vlans <vlan-name> l3-interface <vlan.unit-number>
|
Use the following command in the configuration mode:
set vlans <vlan-name> l3-interface <vlan.unit-number>
commit
|
set the interface ge-0/0/20 as access port
|
set interfaces <interface-name> unit <unit-number> family ethernet-switching port-mode access
|
Use the following command in the configuration mode:
set interfaces ge-0/0/20 unit 0 family ethernet-switching port-mode access
commit
|
How to make an interface an access port
|
set interfaces <interface-name> unit <unit-number> family ethernet-switching port-mode access
|
Use the following command in the configuration mode:
set interfaces <interface-name> unit <unit-number> family ethernet-switching port-mode access
commit
|
set port mode of interface ge-0/0/25 as access port
|
set interfaces <interface-name> unit <unit-number> family ethernet-switching port-mode access
|
Use the following command in the configuration mode:
set interfaces ge-0/0/25 unit 0 family ethernet-switching port-mode access
commit
|
set the interface ge-1/0/5 to operate in access mode
|
set interfaces <interface-name> unit <unit-number> family ethernet-switching port-mode access
|
Use the following command in the configuration mode:
set interfaces ge-1/0/5 unit 0 family ethernet-switching port-mode access
commit
|
let the interface ge-2/0/25 to operate in access mode
|
set interfaces <interface-name> unit <unit-number> family ethernet-switching port-mode access
|
Use the following command in the configuration mode:
set interfaces ge-2/0/25 unit 0 family ethernet-switching port-mode access
commit
|
allow port ge-0/0/6 to carry traffic from multiple vlans
|
set interfaces <interface-name> unit <unit-number> family ethernet-switching port-mode trunk
|
Use the following commands in the configuration mode:
set interfaces ge-0/0/6 unit 0 family ethernet-switching port-mode trunk
commit
|
enable the port ge-0/0/16 to carry traffic from multiple vlans
|
set interfaces <interface-name> unit <unit-number> family ethernet-switching port-mode trunk
|
Use the following commands in the configuration mode:
set interfaces ge-0/0/16 unit 0 family ethernet-switching port-mode trunk
commit
|
set port ge-0/0/19 as a trunk port
|
set interfaces <interface-name> unit <unit-number> family ethernet-switching port-mode trunk
|
Use the following commands in the configuration mode:
set interfaces ge-0/0/19 unit 0 family ethernet-switching port-mode trunk
commit
|
how to allow an interface to carry traffic from multiple vlans
|
set interfaces <interface-name> unit <unit-number> family ethernet-switching port-mode trunk
|
Use the following commands in the configuration mode:
set interfaces <interface-name> unit <unit-number> family ethernet-switching port-mode trunk
commit
|
how to enable an interface to carry traffic from multiple vlans
|
set interfaces <interface-name> unit <unit-number> family ethernet-switching port-mode trunk
|
Use the following commands in the configuration mode:
set interfaces <interface-name> unit <unit-number> family ethernet-switching port-mode trunk
commit
|
allow port ge-0/0/6 to carry traffic from all vlans
|
set interfaces <interface-name> unit 0 family ethernet-switching port-mode trunk vlan members all
|
Use the following command in the configuration mode:
set interfaces ge-0/0/6 unit 0 family ethernet-switching port-mode trunk vlan members all
commit
|
allow port ge-0/0/9 to carry traffic from all vlans
|
set interfaces <interface-name> unit 0 family ethernet-switching port-mode trunk vlan members all
|
Use the following command in the configuration mode:
set interfaces ge-0/0/9 unit 0 family ethernet-switching port-mode trunk vlan members all
commit
|
How to make an interface carry traffic from all vlans
|
set interfaces <interface-name> unit <unit-number> family ethernet-switching port-mode trunk vlan members all
|
Use the following command in the configuration mode:
set interfaces <interface-name> unit <unit-number> family ethernet-switching port-mode trunk vlan members all
commit
|
make port ge-0/0/7 carry traffic from vlans HR, FIN, and MGMT
|
set interfaces <interface-name> unit <unit-number> family ethernet-switching port-mode trunk vlan members <vlan-name-or-id>
|
Use the following commands in the configuration mode:
set interfaces ge-0/0/7 unit 0 family ethernet-switching port-mode trunk vlan members HR
set interfaces ge-0/0/7 unit 0 family ethernet-switching port-mode trunk vlan members MGMT
set interfaces ge-0/0/7 unit 0 family ethernet-switching port-mode trunk vlan members FIN
commit
|
make port ge-1/0/23 carry traffic from vlans REG, SUPPORT, and MGMT
|
set interfaces <interface-name> unit <unit-number> family ethernet-switching port-mode trunk vlan members <vlan-name-or-id>
|
Use the following commands in the configuration mode:
set interfaces ge-0/0/7 unit 0 family ethernet-switching port-mode trunk vlan members REG
set interfaces ge-0/0/7 unit 0 family ethernet-switching port-mode trunk vlan members MGMT
set interfaces ge-0/0/7 unit 0 family ethernet-switching port-mode trunk vlan members SUPPORT
commit
|
We will connect a new switch on port ge-0/0/7 configure rstp on this interface as a point to point
|
set protocols rstp interface <interface-name> mode point-to-point
|
Use the following command in the configuration mode:
set protocols rstp interface ge-0/0/7.0 mode point-to-point
commit
|
We will connect a new switch on port ge-0/0/9, the new switch has RSTP enabled, enable RSTP on ge-0/0/9 in the mode point to point
|
set protocols rstp interface <interface-name> mode point-to-point
|
Use the following command in the configuration mode:
set protocols rstp interface ge-0/0/9 mode point-to-point
commit
|
How to make an interface participate in RSTP protocol in the mode point to point
|
set protocols rstp interface <interface-name> mode point-to-point
|
Use the following command in the configuration mode:
set protocols rstp interface <interface-name> mode point-to-point
commit
|
How to set the RSTP interface mode to point to point
|
set protocols rstp interface <interface-name> mode point-to-point
|
Use the following command in the configuration mode:
set protocols rstp interface <interface-name> mode point-to-point
commit
|
Execlude interface ge-0/0/19 from participating in RSTP
|
set protocols rstp interface <interface-name> disable
|
Use the following command in the configuration mode:
set protocols rstp interface ge-0/0/19 disable
commit
|
How to execlude an interface from participating in RSTP
|
set protocols rstp interface <interface-name> disable
|
Use the following command in the configuration mode:
set protocols rstp interface <interface-name> disable
commit
|
Disable RSTP protocol on interface ge-0/0/0
|
set protocols rstp interface <interface-name> disable
|
Use the following command in the configuration mode:
set protocols rstp interface ge-0/0/0 disable
commit
|
How to disable RSTP protocol on a specific interface
|
set protocols rstp interface <interface-name> disable
|
Use the following command in the configuration mode:
set protocols rstp interface <interface-name> disable
commit
|
Help me configure RSTP protocol on interface ge-0/0/1 to connect another switch on that port on a juniper switch ex3300 using command line
|
set protocols rstp interface <interface-name> mode point-to-point
|
Use the following command in the configuration mode:
set protocols rstp interface ge-0/0/1 mode point-to-point
commit
|
How to configure RSTP protocol on interface ge-1/0/5 to connect another switch on that port on a juniper switch ex3300 using command line
|
set protocols rstp interface <interface-name> mode point-to-point
|
Use the following command in the configuration mode:
set protocols rstp interface ge-1/0/5 mode point-to-point
commit
|
Configure RSTP on interface ge-0/0/20 in the mode shared
|
set protocols rstp interface <interface-name> mode shared
|
Use the following command in the configuration mode:
set protocols rstp interface ge-0/0/20 mode shared
commit
|
how to set RSTP particpating interface in the mode shared
|
set protocols rstp interface <interface-name> mode shared
|
Use the following command in the configuration mode:
set protocols rstp interface <interface-name> mode shared
commit
|
set RSTP mode on interface ge-2/0/20 as shared
|
set protocols rstp interface <interface-name> mode shared
|
Use the following command in the configuration mode:
set protocols rstp interface ge-2/0/20 mode shared
commit
|
Enable RSTP on interface ge-0/0/7 in the mode point to point and set the no root port feature
|
set protocols rstp interface <interface-name> mode point-to-point no-root-port
|
Use the following command in the configuration mode:
set protocols rstp interface ge-0/0/7 mode point-to-point no-root-port
commit
|
set RSTP on interface ge-0/0/15 in the mode point to point and prevent this interface from becoming a root interface
|
set protocols rstp interface <interface-name> mode point-to-point no-root-port
|
Use the following command in the configuration mode:
set protocols rstp interface ge-0/0/15 mode point-to-point no-root-port
commit
|
Enable RSTP root-protect feature on interface ge-0/0/13
|
set protocols rstp interface <interface-name> no-root-port
|
Use the following command in the configuration mode:
set protocols rstp interface ge-0/0/13 no-root-port
commit
|
how to enable RSTP root-protect feature on an interface
|
set protocols rstp interface <interface-name> no-root-port
|
Use the following command in the configuration mode:
set protocols rstp interface <interface-name> no-root-port
commit
|
Enable the RSTP root protection feature on interface ge-0/0/3
|
set protocols rstp interface <interface-name> no-root-port
|
Use the following command in the configuration mode:
set protocols rstp interface ge-0/0/3 no-root-port
commit
|
set the RSTP root-protect feature on interface ge-0/0/23
|
set protocols rstp interface <interface-name> no-root-port
|
Use the following command in the configuration mode:
set protocols rstp interface ge-0/0/23 no-root-port
commit
|
how to set the RSTP root-protect feature on interface
|
set protocols rstp interface <interface-name> no-root-port
|
Use the following command in the configuration mode:
set protocols rstp interface <interface-name> no-root-port
commit
|
Delete RSTP root-protect feature on interface ge-0/0/33
|
delete protocols rstp interface <interface-name> no-root-port
|
Use the following command in the configuration mode:
delete protocols rstp interface ge-0/0/33 no-root-port
commit
|
how to delete RSTP root-protect feature on a specific interface
|
delete protocols rstp interface <interface-name> no-root-port
|
Use the following command in the configuration mode:
delete protocols rstp interface <interface-name> no-root-port
commit
|
Disable RSTP root-protect feature on interface ge-0/0/42
|
delete protocols rstp interface <interface-name> no-root-port
|
Use the following command in the configuration mode:
delete protocols rstp interface ge-0/0/42 no-root-port
commit
|
Disable RSTP protocol
|
set protocols rstp disable
|
Use the following command in the configuration mode:
set protocols rstp disable
commit
|
how to disable the RSTP protocol
|
set protocols rstp disable
|
Use the following command in the configuration mode:
set protocols rstp disable
commit
|
Set the RSTP maximum age of received protocol BPDUs to 30
|
set protocols rstp max-age <max-age-interval>
|
Use the following command in the configuration mode:
set protocols rstp max-age 30
commit
|
How to set the RSTP maximum age of received protocol BPDUs
|
set protocols rstp max-age <max-age-interval>
|
Use the following command in the configuration mode:
set protocols rstp max-age <max-age-interval>
commit
|
Set the RSTP max age of received protocol BPDUs to 15
|
set protocols rstp max-age <max-age-interval>
|
Use the following command in the configuration mode:
set protocols rstp max-age 15
commit
|
Set the RSTP forwarding delay to 10
|
set protocols rstp forward-delay <forwarding-delay-interval>
|
Use the following command in the configuration mode:
set protocols rstp forward-delay 10
commit
|
How to set the RSTP forwarding delay
|
set protocols rstp forward-delay <forwarding-delay-interval>
|
Use the following command in the configuration mode:
set protocols rstp forward-delay <forwarding-delay-interval>
commit
|
Set the RSTP protocol forwarding delay to 20
|
set protocols rstp forward-delay <forwarding-delay-interval>
|
Use the following command in the configuration mode:
set protocols rstp forward-delay 20
commit
|
Set the RSTP bridge port delay during the listening and learning states to 30
|
set protocols rstp forward-delay <forwarding-delay-interval>
|
Use the following command in the configuration mode:
set protocols rstp forward-delay 30
commit
|
how to set the RSTP bridge port delay during the listening and learning states
|
set protocols rstp forward-delay <forwarding-delay-interval>
|
Use the following command in the configuration mode:
set protocols rstp forward-delay <forwarding-delay-interval>
commit
|
set RSTP protocol bridge priority to 8k
|
set protocols rstp bridge-priority <priority-in-increments-of-4k>
|
Use the following command in the configuration mode:
set protocols rstp bridge-priority 8k
commit
|
set the RSTP protocol bridge priority to 12k
|
set protocols rstp bridge-priority <priority-in-increments-of-4k>
|
Use the following command in the configuration mode:
set protocols rstp bridge-priority 12k
commit
|
how to set RSTP protocol bridge priority
|
set protocols rstp bridge-priority <priority-in-increments-of-4k>
|
Use the following command in the configuration mode:
set protocols rstp bridge-priority <priority-in-increments-of-4k>
commit
|
set the bridge priority of RSTP protocol to 16k
|
set protocols rstp bridge-priority <priority-in-increments-of-4k>
|
Use the following command in the configuration mode:
set protocols rstp bridge-priority 16k
commit
|
set RSTP protocol hello interval to 3 seconds
|
set protocols rstp hello-time <interval>
|
Use the following command in the configuration mode:
set protocols rstp hello-time 3
commit
|
how to set RSTP protocol hello interval
|
set protocols rstp hello-time <interval>
|
Use the following command in the configuration mode:
set protocols rstp hello-time <interval>
commit
|
set RSTP protocol hello interval to 5 seconds
|
set protocols rstp hello-time <interval>
|
Use the following command in the configuration mode:
set protocols rstp hello-time 5
commit
|
set RSTP protocol hello interval to 4 seconds
|
set protocols rstp hello-time <interval>
|
Use the following command in the configuration mode:
set protocols rstp hello-time 4
commit
|
Display RSTP protocol configurations from the operational mode
|
show configuration protocols rstp
|
Use the following command in the operational mode:
show configuration protocols rstp
|
how to show RSTP protocol configurations from the operational mode
|
show configuration protocols rstp
|
Use the following command in the operational mode:
show configuration protocols rstp
|
Show the current RSTP configuration
|
show configuration protocols rstp
|
Use the following command in the operational mode:
show configuration protocols rstp
|
Show the current RSTP configuration in the set format
|
show configuration protocols rstp
|
Use the following command in the configuration mode:
show | display set |match rstp
|
Display RSTP protocol configurations in the operational mode in the set format
|
show configuration protocols rstp | display set
|
Use the following command in the operational mode:
show configuration protocols rstp | display set
|
block rstp bpdu on edge interfaces
|
set protocols rstp bpdu-block-on-edge
|
Use the following command in the configuration mode:
set protocols rstp bpdu-block-on-edge
commit
|
set all interfaces on the switch to edge RSTP interfaces and enable bpdu-block-on-edge
|
set protocols rstp interface all edge
set protocols rstp bpdu-block-on-edge
|
Use the following command in the configuration mode:
set protocols rstp interface all edge
set protocols rstp bpdu-block-on-edge
commit
|
How to block RSTP bpdu on edge interfaces
|
set protocols rstp bpdu-block-on-edge
|
Use the following command in the configuration mode:
set protocols rstp bpdu-block-on-edge
commit
|
set interface ge-0/0/7 as RSTP edge interface
|
set protocols rstp interface <interface-name> edge
|
Use the following command in the configuration mode:
set protocols rstp interface ge-0/0/7 edge
commit
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.