text
stringlengths 65
20k
|
|---|
offline_access Scopes enable you to specify the type of access you need.Scopes limit access for the OAuth token.They do not grant any additional permission beyond that which the user already possesses.See Set Up the OAuth Authorization Code Credentials Security Policy with Oracle Identity Cloud Service.Client Authentication : You can optionally configure OAuth flows with client authentication.This is similar to the Postman user interface feature for configuring client authentication.Send client credentials as basic auth header: Pass the client ID and client secret in the header as basic authentication.Send client credentials in body : Pass the client ID and client secret in the body as form fields.When configuration is complete, perform the following steps: a.Click Provide Consent to test the OAuth flow.b.If the Oracle Identity Cloud Service Oracle Integration and Oracle Fusion Applications users are different, log in to the respective instance when prompted.Chapter 2 Create a Connection 2-32Element Description Note: You are not prompted to log in if these users are the same.c.Return to the Connections page and click Test.Note: If you receive an Unauthorized 401 error when testing your connection with a nonfederated user account, you may be logged in with the wrong user account.See Avoid Potential Errors When Testing Your Connection with a Nonfederated User Account .Test the Connection Test your connection to ensure that it's configured successfully.1.In the page title bar, click Test. |
Scopes limit access for the OAuth token.They do not grant any additional permission beyond that which the user already possesses.See Set Up the OAuth Authorization Code Credentials Security Policy with Oracle Identity Cloud Service.Client Authentication : You can optionally configure OAuth flows with client authentication.This is similar to the Postman user interface feature for configuring client authentication.Send client credentials as basic auth header: Pass the client ID and client secret in the header as basic authentication.Send client credentials in body : Pass the client ID and client secret in the body as form fields.When configuration is complete, perform the following steps: a.Click Provide Consent to test the OAuth flow.b.If the Oracle Identity Cloud Service Oracle Integration and Oracle Fusion Applications users are different, log in to the respective instance when prompted.Chapter 2 Create a Connection 2-32Element Description Note: You are not prompted to log in if these users are the same.c.Return to the Connections page and click Test.Note: If you receive an Unauthorized 401 error when testing your connection with a nonfederated user account, you may be logged in with the wrong user account.See Avoid Potential Errors When Testing Your Connection with a Nonfederated User Account .Test the Connection Test your connection to ensure that it's configured successfully.1.In the page title bar, click Test.What happens next depends on whether your adapter connection uses a Web Services Description Language (WSDL) file. |
They do not grant any additional permission beyond that which the user already possesses.See Set Up the OAuth Authorization Code Credentials Security Policy with Oracle Identity Cloud Service.Client Authentication : You can optionally configure OAuth flows with client authentication.This is similar to the Postman user interface feature for configuring client authentication.Send client credentials as basic auth header: Pass the client ID and client secret in the header as basic authentication.Send client credentials in body : Pass the client ID and client secret in the body as form fields.When configuration is complete, perform the following steps: a.Click Provide Consent to test the OAuth flow.b.If the Oracle Identity Cloud Service Oracle Integration and Oracle Fusion Applications users are different, log in to the respective instance when prompted.Chapter 2 Create a Connection 2-32Element Description Note: You are not prompted to log in if these users are the same.c.Return to the Connections page and click Test.Note: If you receive an Unauthorized 401 error when testing your connection with a nonfederated user account, you may be logged in with the wrong user account.See Avoid Potential Errors When Testing Your Connection with a Nonfederated User Account .Test the Connection Test your connection to ensure that it's configured successfully.1.In the page title bar, click Test.What happens next depends on whether your adapter connection uses a Web Services Description Language (WSDL) file.Only some adapter connections use WSDLs. |
See Set Up the OAuth Authorization Code Credentials Security Policy with Oracle Identity Cloud Service.Client Authentication : You can optionally configure OAuth flows with client authentication.This is similar to the Postman user interface feature for configuring client authentication.Send client credentials as basic auth header: Pass the client ID and client secret in the header as basic authentication.Send client credentials in body : Pass the client ID and client secret in the body as form fields.When configuration is complete, perform the following steps: a.Click Provide Consent to test the OAuth flow.b.If the Oracle Identity Cloud Service Oracle Integration and Oracle Fusion Applications users are different, log in to the respective instance when prompted.Chapter 2 Create a Connection 2-32Element Description Note: You are not prompted to log in if these users are the same.c.Return to the Connections page and click Test.Note: If you receive an Unauthorized 401 error when testing your connection with a nonfederated user account, you may be logged in with the wrong user account.See Avoid Potential Errors When Testing Your Connection with a Nonfederated User Account .Test the Connection Test your connection to ensure that it's configured successfully.1.In the page title bar, click Test.What happens next depends on whether your adapter connection uses a Web Services Description Language (WSDL) file.Only some adapter connections use WSDLs.If Your Connection... Then... Doesnt use a WSDL The test starts automatically and validates the inputs you provided for the connection. |
Client Authentication : You can optionally configure OAuth flows with client authentication.This is similar to the Postman user interface feature for configuring client authentication.Send client credentials as basic auth header: Pass the client ID and client secret in the header as basic authentication.Send client credentials in body : Pass the client ID and client secret in the body as form fields.When configuration is complete, perform the following steps: a.Click Provide Consent to test the OAuth flow.b.If the Oracle Identity Cloud Service Oracle Integration and Oracle Fusion Applications users are different, log in to the respective instance when prompted.Chapter 2 Create a Connection 2-32Element Description Note: You are not prompted to log in if these users are the same.c.Return to the Connections page and click Test.Note: If you receive an Unauthorized 401 error when testing your connection with a nonfederated user account, you may be logged in with the wrong user account.See Avoid Potential Errors When Testing Your Connection with a Nonfederated User Account .Test the Connection Test your connection to ensure that it's configured successfully.1.In the page title bar, click Test.What happens next depends on whether your adapter connection uses a Web Services Description Language (WSDL) file.Only some adapter connections use WSDLs.If Your Connection... Then... Doesnt use a WSDL The test starts automatically and validates the inputs you provided for the connection.Uses a WSDL A dialog prompts you to select the type of connection testing to perform: Validate and Test : Performs a full validation of the WSDL, including processing of the imported schemas and WSDLs. |
This is similar to the Postman user interface feature for configuring client authentication.Send client credentials as basic auth header: Pass the client ID and client secret in the header as basic authentication.Send client credentials in body : Pass the client ID and client secret in the body as form fields.When configuration is complete, perform the following steps: a.Click Provide Consent to test the OAuth flow.b.If the Oracle Identity Cloud Service Oracle Integration and Oracle Fusion Applications users are different, log in to the respective instance when prompted.Chapter 2 Create a Connection 2-32Element Description Note: You are not prompted to log in if these users are the same.c.Return to the Connections page and click Test.Note: If you receive an Unauthorized 401 error when testing your connection with a nonfederated user account, you may be logged in with the wrong user account.See Avoid Potential Errors When Testing Your Connection with a Nonfederated User Account .Test the Connection Test your connection to ensure that it's configured successfully.1.In the page title bar, click Test.What happens next depends on whether your adapter connection uses a Web Services Description Language (WSDL) file.Only some adapter connections use WSDLs.If Your Connection... Then... Doesnt use a WSDL The test starts automatically and validates the inputs you provided for the connection.Uses a WSDL A dialog prompts you to select the type of connection testing to perform: Validate and Test : Performs a full validation of the WSDL, including processing of the imported schemas and WSDLs.Complete validation can take several minutes depending on the number of imported schemas and WSDLs. |
Send client credentials as basic auth header: Pass the client ID and client secret in the header as basic authentication.Send client credentials in body : Pass the client ID and client secret in the body as form fields.When configuration is complete, perform the following steps: a.Click Provide Consent to test the OAuth flow.b.If the Oracle Identity Cloud Service Oracle Integration and Oracle Fusion Applications users are different, log in to the respective instance when prompted.Chapter 2 Create a Connection 2-32Element Description Note: You are not prompted to log in if these users are the same.c.Return to the Connections page and click Test.Note: If you receive an Unauthorized 401 error when testing your connection with a nonfederated user account, you may be logged in with the wrong user account.See Avoid Potential Errors When Testing Your Connection with a Nonfederated User Account .Test the Connection Test your connection to ensure that it's configured successfully.1.In the page title bar, click Test.What happens next depends on whether your adapter connection uses a Web Services Description Language (WSDL) file.Only some adapter connections use WSDLs.If Your Connection... Then... Doesnt use a WSDL The test starts automatically and validates the inputs you provided for the connection.Uses a WSDL A dialog prompts you to select the type of connection testing to perform: Validate and Test : Performs a full validation of the WSDL, including processing of the imported schemas and WSDLs.Complete validation can take several minutes depending on the number of imported schemas and WSDLs.No requests are sent to the operations exposed in the WSDL. |
Send client credentials in body : Pass the client ID and client secret in the body as form fields.When configuration is complete, perform the following steps: a.Click Provide Consent to test the OAuth flow.b.If the Oracle Identity Cloud Service Oracle Integration and Oracle Fusion Applications users are different, log in to the respective instance when prompted.Chapter 2 Create a Connection 2-32Element Description Note: You are not prompted to log in if these users are the same.c.Return to the Connections page and click Test.Note: If you receive an Unauthorized 401 error when testing your connection with a nonfederated user account, you may be logged in with the wrong user account.See Avoid Potential Errors When Testing Your Connection with a Nonfederated User Account .Test the Connection Test your connection to ensure that it's configured successfully.1.In the page title bar, click Test.What happens next depends on whether your adapter connection uses a Web Services Description Language (WSDL) file.Only some adapter connections use WSDLs.If Your Connection... Then... Doesnt use a WSDL The test starts automatically and validates the inputs you provided for the connection.Uses a WSDL A dialog prompts you to select the type of connection testing to perform: Validate and Test : Performs a full validation of the WSDL, including processing of the imported schemas and WSDLs.Complete validation can take several minutes depending on the number of imported schemas and WSDLs.No requests are sent to the operations exposed in the WSDL.Test: Connects to the WSDL URL and performs a syntax check on the WSDL. |
When configuration is complete, perform the following steps: a.Click Provide Consent to test the OAuth flow.b.If the Oracle Identity Cloud Service Oracle Integration and Oracle Fusion Applications users are different, log in to the respective instance when prompted.Chapter 2 Create a Connection 2-32Element Description Note: You are not prompted to log in if these users are the same.c.Return to the Connections page and click Test.Note: If you receive an Unauthorized 401 error when testing your connection with a nonfederated user account, you may be logged in with the wrong user account.See Avoid Potential Errors When Testing Your Connection with a Nonfederated User Account .Test the Connection Test your connection to ensure that it's configured successfully.1.In the page title bar, click Test.What happens next depends on whether your adapter connection uses a Web Services Description Language (WSDL) file.Only some adapter connections use WSDLs.If Your Connection... Then... Doesnt use a WSDL The test starts automatically and validates the inputs you provided for the connection.Uses a WSDL A dialog prompts you to select the type of connection testing to perform: Validate and Test : Performs a full validation of the WSDL, including processing of the imported schemas and WSDLs.Complete validation can take several minutes depending on the number of imported schemas and WSDLs.No requests are sent to the operations exposed in the WSDL.Test: Connects to the WSDL URL and performs a syntax check on the WSDL.No requests are sent to the operations exposed in the WSDL. |
b.If the Oracle Identity Cloud Service Oracle Integration and Oracle Fusion Applications users are different, log in to the respective instance when prompted.Chapter 2 Create a Connection 2-32Element Description Note: You are not prompted to log in if these users are the same.c.Return to the Connections page and click Test.Note: If you receive an Unauthorized 401 error when testing your connection with a nonfederated user account, you may be logged in with the wrong user account.See Avoid Potential Errors When Testing Your Connection with a Nonfederated User Account .Test the Connection Test your connection to ensure that it's configured successfully.1.In the page title bar, click Test.What happens next depends on whether your adapter connection uses a Web Services Description Language (WSDL) file.Only some adapter connections use WSDLs.If Your Connection... Then... Doesnt use a WSDL The test starts automatically and validates the inputs you provided for the connection.Uses a WSDL A dialog prompts you to select the type of connection testing to perform: Validate and Test : Performs a full validation of the WSDL, including processing of the imported schemas and WSDLs.Complete validation can take several minutes depending on the number of imported schemas and WSDLs.No requests are sent to the operations exposed in the WSDL.Test: Connects to the WSDL URL and performs a syntax check on the WSDL.No requests are sent to the operations exposed in the WSDL.2.Wait for a message about the results of the connection test. |
c.Return to the Connections page and click Test.Note: If you receive an Unauthorized 401 error when testing your connection with a nonfederated user account, you may be logged in with the wrong user account.See Avoid Potential Errors When Testing Your Connection with a Nonfederated User Account .Test the Connection Test your connection to ensure that it's configured successfully.1.In the page title bar, click Test.What happens next depends on whether your adapter connection uses a Web Services Description Language (WSDL) file.Only some adapter connections use WSDLs.If Your Connection... Then... Doesnt use a WSDL The test starts automatically and validates the inputs you provided for the connection.Uses a WSDL A dialog prompts you to select the type of connection testing to perform: Validate and Test : Performs a full validation of the WSDL, including processing of the imported schemas and WSDLs.Complete validation can take several minutes depending on the number of imported schemas and WSDLs.No requests are sent to the operations exposed in the WSDL.Test: Connects to the WSDL URL and performs a syntax check on the WSDL.No requests are sent to the operations exposed in the WSDL.2.Wait for a message about the results of the connection test.If the test was successful, then the connection is configured properly. |
Note: If you receive an Unauthorized 401 error when testing your connection with a nonfederated user account, you may be logged in with the wrong user account.See Avoid Potential Errors When Testing Your Connection with a Nonfederated User Account .Test the Connection Test your connection to ensure that it's configured successfully.1.In the page title bar, click Test.What happens next depends on whether your adapter connection uses a Web Services Description Language (WSDL) file.Only some adapter connections use WSDLs.If Your Connection... Then... Doesnt use a WSDL The test starts automatically and validates the inputs you provided for the connection.Uses a WSDL A dialog prompts you to select the type of connection testing to perform: Validate and Test : Performs a full validation of the WSDL, including processing of the imported schemas and WSDLs.Complete validation can take several minutes depending on the number of imported schemas and WSDLs.No requests are sent to the operations exposed in the WSDL.Test: Connects to the WSDL URL and performs a syntax check on the WSDL.No requests are sent to the operations exposed in the WSDL.2.Wait for a message about the results of the connection test.If the test was successful, then the connection is configured properly.If the test failed, then edit the configuration details you entered. |
See Avoid Potential Errors When Testing Your Connection with a Nonfederated User Account .Test the Connection Test your connection to ensure that it's configured successfully.1.In the page title bar, click Test.What happens next depends on whether your adapter connection uses a Web Services Description Language (WSDL) file.Only some adapter connections use WSDLs.If Your Connection... Then... Doesnt use a WSDL The test starts automatically and validates the inputs you provided for the connection.Uses a WSDL A dialog prompts you to select the type of connection testing to perform: Validate and Test : Performs a full validation of the WSDL, including processing of the imported schemas and WSDLs.Complete validation can take several minutes depending on the number of imported schemas and WSDLs.No requests are sent to the operations exposed in the WSDL.Test: Connects to the WSDL URL and performs a syntax check on the WSDL.No requests are sent to the operations exposed in the WSDL.2.Wait for a message about the results of the connection test.If the test was successful, then the connection is configured properly.If the test failed, then edit the configuration details you entered.Check for typos, verify URLs and credentials, and download the diagnostic logs for additional details. |
Test the Connection Test your connection to ensure that it's configured successfully.1.In the page title bar, click Test.What happens next depends on whether your adapter connection uses a Web Services Description Language (WSDL) file.Only some adapter connections use WSDLs.If Your Connection... Then... Doesnt use a WSDL The test starts automatically and validates the inputs you provided for the connection.Uses a WSDL A dialog prompts you to select the type of connection testing to perform: Validate and Test : Performs a full validation of the WSDL, including processing of the imported schemas and WSDLs.Complete validation can take several minutes depending on the number of imported schemas and WSDLs.No requests are sent to the operations exposed in the WSDL.Test: Connects to the WSDL URL and performs a syntax check on the WSDL.No requests are sent to the operations exposed in the WSDL.2.Wait for a message about the results of the connection test.If the test was successful, then the connection is configured properly.If the test failed, then edit the configuration details you entered.Check for typos, verify URLs and credentials, and download the diagnostic logs for additional details.Continue to test until the connection is successful. |
1.In the page title bar, click Test.What happens next depends on whether your adapter connection uses a Web Services Description Language (WSDL) file.Only some adapter connections use WSDLs.If Your Connection... Then... Doesnt use a WSDL The test starts automatically and validates the inputs you provided for the connection.Uses a WSDL A dialog prompts you to select the type of connection testing to perform: Validate and Test : Performs a full validation of the WSDL, including processing of the imported schemas and WSDLs.Complete validation can take several minutes depending on the number of imported schemas and WSDLs.No requests are sent to the operations exposed in the WSDL.Test: Connects to the WSDL URL and performs a syntax check on the WSDL.No requests are sent to the operations exposed in the WSDL.2.Wait for a message about the results of the connection test.If the test was successful, then the connection is configured properly.If the test failed, then edit the configuration details you entered.Check for typos, verify URLs and credentials, and download the diagnostic logs for additional details.Continue to test until the connection is successful.3.When complete, click Save . |
What happens next depends on whether your adapter connection uses a Web Services Description Language (WSDL) file.Only some adapter connections use WSDLs.If Your Connection... Then... Doesnt use a WSDL The test starts automatically and validates the inputs you provided for the connection.Uses a WSDL A dialog prompts you to select the type of connection testing to perform: Validate and Test : Performs a full validation of the WSDL, including processing of the imported schemas and WSDLs.Complete validation can take several minutes depending on the number of imported schemas and WSDLs.No requests are sent to the operations exposed in the WSDL.Test: Connects to the WSDL URL and performs a syntax check on the WSDL.No requests are sent to the operations exposed in the WSDL.2.Wait for a message about the results of the connection test.If the test was successful, then the connection is configured properly.If the test failed, then edit the configuration details you entered.Check for typos, verify URLs and credentials, and download the diagnostic logs for additional details.Continue to test until the connection is successful.3.When complete, click Save .Upload an SSL Certificate Certificates are used to validate outbound SSL connections. |
Only some adapter connections use WSDLs.If Your Connection... Then... Doesnt use a WSDL The test starts automatically and validates the inputs you provided for the connection.Uses a WSDL A dialog prompts you to select the type of connection testing to perform: Validate and Test : Performs a full validation of the WSDL, including processing of the imported schemas and WSDLs.Complete validation can take several minutes depending on the number of imported schemas and WSDLs.No requests are sent to the operations exposed in the WSDL.Test: Connects to the WSDL URL and performs a syntax check on the WSDL.No requests are sent to the operations exposed in the WSDL.2.Wait for a message about the results of the connection test.If the test was successful, then the connection is configured properly.If the test failed, then edit the configuration details you entered.Check for typos, verify URLs and credentials, and download the diagnostic logs for additional details.Continue to test until the connection is successful.3.When complete, click Save .Upload an SSL Certificate Certificates are used to validate outbound SSL connections.If you make an SSL connection in which the root certificate does not exist in Oracle Integration, an exception is thrown. |
If Your Connection... Then... Doesnt use a WSDL The test starts automatically and validates the inputs you provided for the connection.Uses a WSDL A dialog prompts you to select the type of connection testing to perform: Validate and Test : Performs a full validation of the WSDL, including processing of the imported schemas and WSDLs.Complete validation can take several minutes depending on the number of imported schemas and WSDLs.No requests are sent to the operations exposed in the WSDL.Test: Connects to the WSDL URL and performs a syntax check on the WSDL.No requests are sent to the operations exposed in the WSDL.2.Wait for a message about the results of the connection test.If the test was successful, then the connection is configured properly.If the test failed, then edit the configuration details you entered.Check for typos, verify URLs and credentials, and download the diagnostic logs for additional details.Continue to test until the connection is successful.3.When complete, click Save .Upload an SSL Certificate Certificates are used to validate outbound SSL connections.If you make an SSL connection in which the root certificate does not exist in Oracle Integration, an exception is thrown.In that case, you must upload the appropriate certificate. |
Uses a WSDL A dialog prompts you to select the type of connection testing to perform: Validate and Test : Performs a full validation of the WSDL, including processing of the imported schemas and WSDLs.Complete validation can take several minutes depending on the number of imported schemas and WSDLs.No requests are sent to the operations exposed in the WSDL.Test: Connects to the WSDL URL and performs a syntax check on the WSDL.No requests are sent to the operations exposed in the WSDL.2.Wait for a message about the results of the connection test.If the test was successful, then the connection is configured properly.If the test failed, then edit the configuration details you entered.Check for typos, verify URLs and credentials, and download the diagnostic logs for additional details.Continue to test until the connection is successful.3.When complete, click Save .Upload an SSL Certificate Certificates are used to validate outbound SSL connections.If you make an SSL connection in which the root certificate does not exist in Oracle Integration, an exception is thrown.In that case, you must upload the appropriate certificate.A certificate enables Oracle Integration to connect with external services. |
Complete validation can take several minutes depending on the number of imported schemas and WSDLs.No requests are sent to the operations exposed in the WSDL.Test: Connects to the WSDL URL and performs a syntax check on the WSDL.No requests are sent to the operations exposed in the WSDL.2.Wait for a message about the results of the connection test.If the test was successful, then the connection is configured properly.If the test failed, then edit the configuration details you entered.Check for typos, verify URLs and credentials, and download the diagnostic logs for additional details.Continue to test until the connection is successful.3.When complete, click Save .Upload an SSL Certificate Certificates are used to validate outbound SSL connections.If you make an SSL connection in which the root certificate does not exist in Oracle Integration, an exception is thrown.In that case, you must upload the appropriate certificate.A certificate enables Oracle Integration to connect with external services.If the external endpoint requires a specific certificate, request the certificate and then upload it into Oracle Integration. |
No requests are sent to the operations exposed in the WSDL.Test: Connects to the WSDL URL and performs a syntax check on the WSDL.No requests are sent to the operations exposed in the WSDL.2.Wait for a message about the results of the connection test.If the test was successful, then the connection is configured properly.If the test failed, then edit the configuration details you entered.Check for typos, verify URLs and credentials, and download the diagnostic logs for additional details.Continue to test until the connection is successful.3.When complete, click Save .Upload an SSL Certificate Certificates are used to validate outbound SSL connections.If you make an SSL connection in which the root certificate does not exist in Oracle Integration, an exception is thrown.In that case, you must upload the appropriate certificate.A certificate enables Oracle Integration to connect with external services.If the external endpoint requires a specific certificate, request the certificate and then upload it into Oracle Integration.To upload an SSL certificate: 1.In the left navigation pane, click Home > Settings > Certificates .Chapter 2 Upload an SSL Certificate 2-33All certificates currently uploaded to the trust store are displayed in the Certificates dialog. |
Test: Connects to the WSDL URL and performs a syntax check on the WSDL.No requests are sent to the operations exposed in the WSDL.2.Wait for a message about the results of the connection test.If the test was successful, then the connection is configured properly.If the test failed, then edit the configuration details you entered.Check for typos, verify URLs and credentials, and download the diagnostic logs for additional details.Continue to test until the connection is successful.3.When complete, click Save .Upload an SSL Certificate Certificates are used to validate outbound SSL connections.If you make an SSL connection in which the root certificate does not exist in Oracle Integration, an exception is thrown.In that case, you must upload the appropriate certificate.A certificate enables Oracle Integration to connect with external services.If the external endpoint requires a specific certificate, request the certificate and then upload it into Oracle Integration.To upload an SSL certificate: 1.In the left navigation pane, click Home > Settings > Certificates .Chapter 2 Upload an SSL Certificate 2-33All certificates currently uploaded to the trust store are displayed in the Certificates dialog.The link enables you to filter by name, certificate expiration date, status, type, category, and installation method (user-installed or system-installed). |
No requests are sent to the operations exposed in the WSDL.2.Wait for a message about the results of the connection test.If the test was successful, then the connection is configured properly.If the test failed, then edit the configuration details you entered.Check for typos, verify URLs and credentials, and download the diagnostic logs for additional details.Continue to test until the connection is successful.3.When complete, click Save .Upload an SSL Certificate Certificates are used to validate outbound SSL connections.If you make an SSL connection in which the root certificate does not exist in Oracle Integration, an exception is thrown.In that case, you must upload the appropriate certificate.A certificate enables Oracle Integration to connect with external services.If the external endpoint requires a specific certificate, request the certificate and then upload it into Oracle Integration.To upload an SSL certificate: 1.In the left navigation pane, click Home > Settings > Certificates .Chapter 2 Upload an SSL Certificate 2-33All certificates currently uploaded to the trust store are displayed in the Certificates dialog.The link enables you to filter by name, certificate expiration date, status, type, category, and installation method (user-installed or system-installed).Certificates installed by the system cannot be deleted. |
2.Wait for a message about the results of the connection test.If the test was successful, then the connection is configured properly.If the test failed, then edit the configuration details you entered.Check for typos, verify URLs and credentials, and download the diagnostic logs for additional details.Continue to test until the connection is successful.3.When complete, click Save .Upload an SSL Certificate Certificates are used to validate outbound SSL connections.If you make an SSL connection in which the root certificate does not exist in Oracle Integration, an exception is thrown.In that case, you must upload the appropriate certificate.A certificate enables Oracle Integration to connect with external services.If the external endpoint requires a specific certificate, request the certificate and then upload it into Oracle Integration.To upload an SSL certificate: 1.In the left navigation pane, click Home > Settings > Certificates .Chapter 2 Upload an SSL Certificate 2-33All certificates currently uploaded to the trust store are displayed in the Certificates dialog.The link enables you to filter by name, certificate expiration date, status, type, category, and installation method (user-installed or system-installed).Certificates installed by the system cannot be deleted.2.Click Upload at the top of the page. |
If the test was successful, then the connection is configured properly.If the test failed, then edit the configuration details you entered.Check for typos, verify URLs and credentials, and download the diagnostic logs for additional details.Continue to test until the connection is successful.3.When complete, click Save .Upload an SSL Certificate Certificates are used to validate outbound SSL connections.If you make an SSL connection in which the root certificate does not exist in Oracle Integration, an exception is thrown.In that case, you must upload the appropriate certificate.A certificate enables Oracle Integration to connect with external services.If the external endpoint requires a specific certificate, request the certificate and then upload it into Oracle Integration.To upload an SSL certificate: 1.In the left navigation pane, click Home > Settings > Certificates .Chapter 2 Upload an SSL Certificate 2-33All certificates currently uploaded to the trust store are displayed in the Certificates dialog.The link enables you to filter by name, certificate expiration date, status, type, category, and installation method (user-installed or system-installed).Certificates installed by the system cannot be deleted.2.Click Upload at the top of the page.The Upload Certificate dialog box is displayed. |
If the test failed, then edit the configuration details you entered.Check for typos, verify URLs and credentials, and download the diagnostic logs for additional details.Continue to test until the connection is successful.3.When complete, click Save .Upload an SSL Certificate Certificates are used to validate outbound SSL connections.If you make an SSL connection in which the root certificate does not exist in Oracle Integration, an exception is thrown.In that case, you must upload the appropriate certificate.A certificate enables Oracle Integration to connect with external services.If the external endpoint requires a specific certificate, request the certificate and then upload it into Oracle Integration.To upload an SSL certificate: 1.In the left navigation pane, click Home > Settings > Certificates .Chapter 2 Upload an SSL Certificate 2-33All certificates currently uploaded to the trust store are displayed in the Certificates dialog.The link enables you to filter by name, certificate expiration date, status, type, category, and installation method (user-installed or system-installed).Certificates installed by the system cannot be deleted.2.Click Upload at the top of the page.The Upload Certificate dialog box is displayed.3.Enter an alias name and optional description. |
Check for typos, verify URLs and credentials, and download the diagnostic logs for additional details.Continue to test until the connection is successful.3.When complete, click Save .Upload an SSL Certificate Certificates are used to validate outbound SSL connections.If you make an SSL connection in which the root certificate does not exist in Oracle Integration, an exception is thrown.In that case, you must upload the appropriate certificate.A certificate enables Oracle Integration to connect with external services.If the external endpoint requires a specific certificate, request the certificate and then upload it into Oracle Integration.To upload an SSL certificate: 1.In the left navigation pane, click Home > Settings > Certificates .Chapter 2 Upload an SSL Certificate 2-33All certificates currently uploaded to the trust store are displayed in the Certificates dialog.The link enables you to filter by name, certificate expiration date, status, type, category, and installation method (user-installed or system-installed).Certificates installed by the system cannot be deleted.2.Click Upload at the top of the page.The Upload Certificate dialog box is displayed.3.Enter an alias name and optional description.4.In the Type field, select the certificate type. |
Continue to test until the connection is successful.3.When complete, click Save .Upload an SSL Certificate Certificates are used to validate outbound SSL connections.If you make an SSL connection in which the root certificate does not exist in Oracle Integration, an exception is thrown.In that case, you must upload the appropriate certificate.A certificate enables Oracle Integration to connect with external services.If the external endpoint requires a specific certificate, request the certificate and then upload it into Oracle Integration.To upload an SSL certificate: 1.In the left navigation pane, click Home > Settings > Certificates .Chapter 2 Upload an SSL Certificate 2-33All certificates currently uploaded to the trust store are displayed in the Certificates dialog.The link enables you to filter by name, certificate expiration date, status, type, category, and installation method (user-installed or system-installed).Certificates installed by the system cannot be deleted.2.Click Upload at the top of the page.The Upload Certificate dialog box is displayed.3.Enter an alias name and optional description.4.In the Type field, select the certificate type.Each certificate type enables Oracle Integration to connect with external services. |
3.When complete, click Save .Upload an SSL Certificate Certificates are used to validate outbound SSL connections.If you make an SSL connection in which the root certificate does not exist in Oracle Integration, an exception is thrown.In that case, you must upload the appropriate certificate.A certificate enables Oracle Integration to connect with external services.If the external endpoint requires a specific certificate, request the certificate and then upload it into Oracle Integration.To upload an SSL certificate: 1.In the left navigation pane, click Home > Settings > Certificates .Chapter 2 Upload an SSL Certificate 2-33All certificates currently uploaded to the trust store are displayed in the Certificates dialog.The link enables you to filter by name, certificate expiration date, status, type, category, and installation method (user-installed or system-installed).Certificates installed by the system cannot be deleted.2.Click Upload at the top of the page.The Upload Certificate dialog box is displayed.3.Enter an alias name and optional description.4.In the Type field, select the certificate type.Each certificate type enables Oracle Integration to connect with external services.X.509 (SSL transport) SAML (Authentication & Authorization) PGP (Encryption & Decryption) X.509 (SSL transport) 1.Select a certificate category. |
Upload an SSL Certificate Certificates are used to validate outbound SSL connections.If you make an SSL connection in which the root certificate does not exist in Oracle Integration, an exception is thrown.In that case, you must upload the appropriate certificate.A certificate enables Oracle Integration to connect with external services.If the external endpoint requires a specific certificate, request the certificate and then upload it into Oracle Integration.To upload an SSL certificate: 1.In the left navigation pane, click Home > Settings > Certificates .Chapter 2 Upload an SSL Certificate 2-33All certificates currently uploaded to the trust store are displayed in the Certificates dialog.The link enables you to filter by name, certificate expiration date, status, type, category, and installation method (user-installed or system-installed).Certificates installed by the system cannot be deleted.2.Click Upload at the top of the page.The Upload Certificate dialog box is displayed.3.Enter an alias name and optional description.4.In the Type field, select the certificate type.Each certificate type enables Oracle Integration to connect with external services.X.509 (SSL transport) SAML (Authentication & Authorization) PGP (Encryption & Decryption) X.509 (SSL transport) 1.Select a certificate category.a.Trust : Use this option to upload a trust certificate. |
If you make an SSL connection in which the root certificate does not exist in Oracle Integration, an exception is thrown.In that case, you must upload the appropriate certificate.A certificate enables Oracle Integration to connect with external services.If the external endpoint requires a specific certificate, request the certificate and then upload it into Oracle Integration.To upload an SSL certificate: 1.In the left navigation pane, click Home > Settings > Certificates .Chapter 2 Upload an SSL Certificate 2-33All certificates currently uploaded to the trust store are displayed in the Certificates dialog.The link enables you to filter by name, certificate expiration date, status, type, category, and installation method (user-installed or system-installed).Certificates installed by the system cannot be deleted.2.Click Upload at the top of the page.The Upload Certificate dialog box is displayed.3.Enter an alias name and optional description.4.In the Type field, select the certificate type.Each certificate type enables Oracle Integration to connect with external services.X.509 (SSL transport) SAML (Authentication & Authorization) PGP (Encryption & Decryption) X.509 (SSL transport) 1.Select a certificate category.a.Trust : Use this option to upload a trust certificate.i.Click Browse , then select the trust file (for example, .cer or .crt) to upload. |
In that case, you must upload the appropriate certificate.A certificate enables Oracle Integration to connect with external services.If the external endpoint requires a specific certificate, request the certificate and then upload it into Oracle Integration.To upload an SSL certificate: 1.In the left navigation pane, click Home > Settings > Certificates .Chapter 2 Upload an SSL Certificate 2-33All certificates currently uploaded to the trust store are displayed in the Certificates dialog.The link enables you to filter by name, certificate expiration date, status, type, category, and installation method (user-installed or system-installed).Certificates installed by the system cannot be deleted.2.Click Upload at the top of the page.The Upload Certificate dialog box is displayed.3.Enter an alias name and optional description.4.In the Type field, select the certificate type.Each certificate type enables Oracle Integration to connect with external services.X.509 (SSL transport) SAML (Authentication & Authorization) PGP (Encryption & Decryption) X.509 (SSL transport) 1.Select a certificate category.a.Trust : Use this option to upload a trust certificate.i.Click Browse , then select the trust file (for example, .cer or .crt) to upload.b.Identity : Use this option to upload a certificate for two-way SSL communication. |
A certificate enables Oracle Integration to connect with external services.If the external endpoint requires a specific certificate, request the certificate and then upload it into Oracle Integration.To upload an SSL certificate: 1.In the left navigation pane, click Home > Settings > Certificates .Chapter 2 Upload an SSL Certificate 2-33All certificates currently uploaded to the trust store are displayed in the Certificates dialog.The link enables you to filter by name, certificate expiration date, status, type, category, and installation method (user-installed or system-installed).Certificates installed by the system cannot be deleted.2.Click Upload at the top of the page.The Upload Certificate dialog box is displayed.3.Enter an alias name and optional description.4.In the Type field, select the certificate type.Each certificate type enables Oracle Integration to connect with external services.X.509 (SSL transport) SAML (Authentication & Authorization) PGP (Encryption & Decryption) X.509 (SSL transport) 1.Select a certificate category.a.Trust : Use this option to upload a trust certificate.i.Click Browse , then select the trust file (for example, .cer or .crt) to upload.b.Identity : Use this option to upload a certificate for two-way SSL communication.i.Click Browse , then select the keystore file ( .jks) to upload. |
If the external endpoint requires a specific certificate, request the certificate and then upload it into Oracle Integration.To upload an SSL certificate: 1.In the left navigation pane, click Home > Settings > Certificates .Chapter 2 Upload an SSL Certificate 2-33All certificates currently uploaded to the trust store are displayed in the Certificates dialog.The link enables you to filter by name, certificate expiration date, status, type, category, and installation method (user-installed or system-installed).Certificates installed by the system cannot be deleted.2.Click Upload at the top of the page.The Upload Certificate dialog box is displayed.3.Enter an alias name and optional description.4.In the Type field, select the certificate type.Each certificate type enables Oracle Integration to connect with external services.X.509 (SSL transport) SAML (Authentication & Authorization) PGP (Encryption & Decryption) X.509 (SSL transport) 1.Select a certificate category.a.Trust : Use this option to upload a trust certificate.i.Click Browse , then select the trust file (for example, .cer or .crt) to upload.b.Identity : Use this option to upload a certificate for two-way SSL communication.i.Click Browse , then select the keystore file ( .jks) to upload.ii.Enter the comma-separated list of passwords corresponding to key aliases. |
To upload an SSL certificate: 1.In the left navigation pane, click Home > Settings > Certificates .Chapter 2 Upload an SSL Certificate 2-33All certificates currently uploaded to the trust store are displayed in the Certificates dialog.The link enables you to filter by name, certificate expiration date, status, type, category, and installation method (user-installed or system-installed).Certificates installed by the system cannot be deleted.2.Click Upload at the top of the page.The Upload Certificate dialog box is displayed.3.Enter an alias name and optional description.4.In the Type field, select the certificate type.Each certificate type enables Oracle Integration to connect with external services.X.509 (SSL transport) SAML (Authentication & Authorization) PGP (Encryption & Decryption) X.509 (SSL transport) 1.Select a certificate category.a.Trust : Use this option to upload a trust certificate.i.Click Browse , then select the trust file (for example, .cer or .crt) to upload.b.Identity : Use this option to upload a certificate for two-way SSL communication.i.Click Browse , then select the keystore file ( .jks) to upload.ii.Enter the comma-separated list of passwords corresponding to key aliases.Note: When an identity certificate file (JKS) contains more than one private key, all the private keys must have the same password. |
The link enables you to filter by name, certificate expiration date, status, type, category, and installation method (user-installed or system-installed).Certificates installed by the system cannot be deleted.2.Click Upload at the top of the page.The Upload Certificate dialog box is displayed.3.Enter an alias name and optional description.4.In the Type field, select the certificate type.Each certificate type enables Oracle Integration to connect with external services.X.509 (SSL transport) SAML (Authentication & Authorization) PGP (Encryption & Decryption) X.509 (SSL transport) 1.Select a certificate category.a.Trust : Use this option to upload a trust certificate.i.Click Browse , then select the trust file (for example, .cer or .crt) to upload.b.Identity : Use this option to upload a certificate for two-way SSL communication.i.Click Browse , then select the keystore file ( .jks) to upload.ii.Enter the comma-separated list of passwords corresponding to key aliases.Note: When an identity certificate file (JKS) contains more than one private key, all the private keys must have the same password.If the private keys are protected with different passwords, the private keys cannot be extracted from the keystore. |
Certificates installed by the system cannot be deleted.2.Click Upload at the top of the page.The Upload Certificate dialog box is displayed.3.Enter an alias name and optional description.4.In the Type field, select the certificate type.Each certificate type enables Oracle Integration to connect with external services.X.509 (SSL transport) SAML (Authentication & Authorization) PGP (Encryption & Decryption) X.509 (SSL transport) 1.Select a certificate category.a.Trust : Use this option to upload a trust certificate.i.Click Browse , then select the trust file (for example, .cer or .crt) to upload.b.Identity : Use this option to upload a certificate for two-way SSL communication.i.Click Browse , then select the keystore file ( .jks) to upload.ii.Enter the comma-separated list of passwords corresponding to key aliases.Note: When an identity certificate file (JKS) contains more than one private key, all the private keys must have the same password.If the private keys are protected with different passwords, the private keys cannot be extracted from the keystore.iii.Enter the password of the keystore being imported. |
2.Click Upload at the top of the page.The Upload Certificate dialog box is displayed.3.Enter an alias name and optional description.4.In the Type field, select the certificate type.Each certificate type enables Oracle Integration to connect with external services.X.509 (SSL transport) SAML (Authentication & Authorization) PGP (Encryption & Decryption) X.509 (SSL transport) 1.Select a certificate category.a.Trust : Use this option to upload a trust certificate.i.Click Browse , then select the trust file (for example, .cer or .crt) to upload.b.Identity : Use this option to upload a certificate for two-way SSL communication.i.Click Browse , then select the keystore file ( .jks) to upload.ii.Enter the comma-separated list of passwords corresponding to key aliases.Note: When an identity certificate file (JKS) contains more than one private key, all the private keys must have the same password.If the private keys are protected with different passwords, the private keys cannot be extracted from the keystore.iii.Enter the password of the keystore being imported.c.Click Upload .Chapter 2 Upload an SSL Certificate 2-34SAML (Authentication & Authorization) 1.Note that Message Protection is automatically selected as the only available certificate category and cannot be deselected. |
The Upload Certificate dialog box is displayed.3.Enter an alias name and optional description.4.In the Type field, select the certificate type.Each certificate type enables Oracle Integration to connect with external services.X.509 (SSL transport) SAML (Authentication & Authorization) PGP (Encryption & Decryption) X.509 (SSL transport) 1.Select a certificate category.a.Trust : Use this option to upload a trust certificate.i.Click Browse , then select the trust file (for example, .cer or .crt) to upload.b.Identity : Use this option to upload a certificate for two-way SSL communication.i.Click Browse , then select the keystore file ( .jks) to upload.ii.Enter the comma-separated list of passwords corresponding to key aliases.Note: When an identity certificate file (JKS) contains more than one private key, all the private keys must have the same password.If the private keys are protected with different passwords, the private keys cannot be extracted from the keystore.iii.Enter the password of the keystore being imported.c.Click Upload .Chapter 2 Upload an SSL Certificate 2-34SAML (Authentication & Authorization) 1.Note that Message Protection is automatically selected as the only available certificate category and cannot be deselected.Use this option to upload a keystore certificate with SAML token support. |
3.Enter an alias name and optional description.4.In the Type field, select the certificate type.Each certificate type enables Oracle Integration to connect with external services.X.509 (SSL transport) SAML (Authentication & Authorization) PGP (Encryption & Decryption) X.509 (SSL transport) 1.Select a certificate category.a.Trust : Use this option to upload a trust certificate.i.Click Browse , then select the trust file (for example, .cer or .crt) to upload.b.Identity : Use this option to upload a certificate for two-way SSL communication.i.Click Browse , then select the keystore file ( .jks) to upload.ii.Enter the comma-separated list of passwords corresponding to key aliases.Note: When an identity certificate file (JKS) contains more than one private key, all the private keys must have the same password.If the private keys are protected with different passwords, the private keys cannot be extracted from the keystore.iii.Enter the password of the keystore being imported.c.Click Upload .Chapter 2 Upload an SSL Certificate 2-34SAML (Authentication & Authorization) 1.Note that Message Protection is automatically selected as the only available certificate category and cannot be deselected.Use this option to upload a keystore certificate with SAML token support.Create, read, update, and delete (CRUD) operations are supported with this type of certificate. |
4.In the Type field, select the certificate type.Each certificate type enables Oracle Integration to connect with external services.X.509 (SSL transport) SAML (Authentication & Authorization) PGP (Encryption & Decryption) X.509 (SSL transport) 1.Select a certificate category.a.Trust : Use this option to upload a trust certificate.i.Click Browse , then select the trust file (for example, .cer or .crt) to upload.b.Identity : Use this option to upload a certificate for two-way SSL communication.i.Click Browse , then select the keystore file ( .jks) to upload.ii.Enter the comma-separated list of passwords corresponding to key aliases.Note: When an identity certificate file (JKS) contains more than one private key, all the private keys must have the same password.If the private keys are protected with different passwords, the private keys cannot be extracted from the keystore.iii.Enter the password of the keystore being imported.c.Click Upload .Chapter 2 Upload an SSL Certificate 2-34SAML (Authentication & Authorization) 1.Note that Message Protection is automatically selected as the only available certificate category and cannot be deselected.Use this option to upload a keystore certificate with SAML token support.Create, read, update, and delete (CRUD) operations are supported with this type of certificate.2.Click Browse , then select the certificate file ( .cer or .crt) to upload. |
Each certificate type enables Oracle Integration to connect with external services.X.509 (SSL transport) SAML (Authentication & Authorization) PGP (Encryption & Decryption) X.509 (SSL transport) 1.Select a certificate category.a.Trust : Use this option to upload a trust certificate.i.Click Browse , then select the trust file (for example, .cer or .crt) to upload.b.Identity : Use this option to upload a certificate for two-way SSL communication.i.Click Browse , then select the keystore file ( .jks) to upload.ii.Enter the comma-separated list of passwords corresponding to key aliases.Note: When an identity certificate file (JKS) contains more than one private key, all the private keys must have the same password.If the private keys are protected with different passwords, the private keys cannot be extracted from the keystore.iii.Enter the password of the keystore being imported.c.Click Upload .Chapter 2 Upload an SSL Certificate 2-34SAML (Authentication & Authorization) 1.Note that Message Protection is automatically selected as the only available certificate category and cannot be deselected.Use this option to upload a keystore certificate with SAML token support.Create, read, update, and delete (CRUD) operations are supported with this type of certificate.2.Click Browse , then select the certificate file ( .cer or .crt) to upload.3.Click Upload . |
X.509 (SSL transport) SAML (Authentication & Authorization) PGP (Encryption & Decryption) X.509 (SSL transport) 1.Select a certificate category.a.Trust : Use this option to upload a trust certificate.i.Click Browse , then select the trust file (for example, .cer or .crt) to upload.b.Identity : Use this option to upload a certificate for two-way SSL communication.i.Click Browse , then select the keystore file ( .jks) to upload.ii.Enter the comma-separated list of passwords corresponding to key aliases.Note: When an identity certificate file (JKS) contains more than one private key, all the private keys must have the same password.If the private keys are protected with different passwords, the private keys cannot be extracted from the keystore.iii.Enter the password of the keystore being imported.c.Click Upload .Chapter 2 Upload an SSL Certificate 2-34SAML (Authentication & Authorization) 1.Note that Message Protection is automatically selected as the only available certificate category and cannot be deselected.Use this option to upload a keystore certificate with SAML token support.Create, read, update, and delete (CRUD) operations are supported with this type of certificate.2.Click Browse , then select the certificate file ( .cer or .crt) to upload.3.Click Upload .PGP (Encryption & Decryption) 1.Select a certificate category. |
a.Trust : Use this option to upload a trust certificate.i.Click Browse , then select the trust file (for example, .cer or .crt) to upload.b.Identity : Use this option to upload a certificate for two-way SSL communication.i.Click Browse , then select the keystore file ( .jks) to upload.ii.Enter the comma-separated list of passwords corresponding to key aliases.Note: When an identity certificate file (JKS) contains more than one private key, all the private keys must have the same password.If the private keys are protected with different passwords, the private keys cannot be extracted from the keystore.iii.Enter the password of the keystore being imported.c.Click Upload .Chapter 2 Upload an SSL Certificate 2-34SAML (Authentication & Authorization) 1.Note that Message Protection is automatically selected as the only available certificate category and cannot be deselected.Use this option to upload a keystore certificate with SAML token support.Create, read, update, and delete (CRUD) operations are supported with this type of certificate.2.Click Browse , then select the certificate file ( .cer or .crt) to upload.3.Click Upload .PGP (Encryption & Decryption) 1.Select a certificate category.Pretty Good Privacy (PGP) provides cryptographic privacy and authentication for communication. |
i.Click Browse , then select the trust file (for example, .cer or .crt) to upload.b.Identity : Use this option to upload a certificate for two-way SSL communication.i.Click Browse , then select the keystore file ( .jks) to upload.ii.Enter the comma-separated list of passwords corresponding to key aliases.Note: When an identity certificate file (JKS) contains more than one private key, all the private keys must have the same password.If the private keys are protected with different passwords, the private keys cannot be extracted from the keystore.iii.Enter the password of the keystore being imported.c.Click Upload .Chapter 2 Upload an SSL Certificate 2-34SAML (Authentication & Authorization) 1.Note that Message Protection is automatically selected as the only available certificate category and cannot be deselected.Use this option to upload a keystore certificate with SAML token support.Create, read, update, and delete (CRUD) operations are supported with this type of certificate.2.Click Browse , then select the certificate file ( .cer or .crt) to upload.3.Click Upload .PGP (Encryption & Decryption) 1.Select a certificate category.Pretty Good Privacy (PGP) provides cryptographic privacy and authentication for communication.PGP is used for signing, encrypting, and decrypting files. |
b.Identity : Use this option to upload a certificate for two-way SSL communication.i.Click Browse , then select the keystore file ( .jks) to upload.ii.Enter the comma-separated list of passwords corresponding to key aliases.Note: When an identity certificate file (JKS) contains more than one private key, all the private keys must have the same password.If the private keys are protected with different passwords, the private keys cannot be extracted from the keystore.iii.Enter the password of the keystore being imported.c.Click Upload .Chapter 2 Upload an SSL Certificate 2-34SAML (Authentication & Authorization) 1.Note that Message Protection is automatically selected as the only available certificate category and cannot be deselected.Use this option to upload a keystore certificate with SAML token support.Create, read, update, and delete (CRUD) operations are supported with this type of certificate.2.Click Browse , then select the certificate file ( .cer or .crt) to upload.3.Click Upload .PGP (Encryption & Decryption) 1.Select a certificate category.Pretty Good Privacy (PGP) provides cryptographic privacy and authentication for communication.PGP is used for signing, encrypting, and decrypting files.You can select the private key to use for encryption or decryption when configuring the stage file action. |
i.Click Browse , then select the keystore file ( .jks) to upload.ii.Enter the comma-separated list of passwords corresponding to key aliases.Note: When an identity certificate file (JKS) contains more than one private key, all the private keys must have the same password.If the private keys are protected with different passwords, the private keys cannot be extracted from the keystore.iii.Enter the password of the keystore being imported.c.Click Upload .Chapter 2 Upload an SSL Certificate 2-34SAML (Authentication & Authorization) 1.Note that Message Protection is automatically selected as the only available certificate category and cannot be deselected.Use this option to upload a keystore certificate with SAML token support.Create, read, update, and delete (CRUD) operations are supported with this type of certificate.2.Click Browse , then select the certificate file ( .cer or .crt) to upload.3.Click Upload .PGP (Encryption & Decryption) 1.Select a certificate category.Pretty Good Privacy (PGP) provides cryptographic privacy and authentication for communication.PGP is used for signing, encrypting, and decrypting files.You can select the private key to use for encryption or decryption when configuring the stage file action.a.Private : Uses a private key of the target location to decrypt the file. |
ii.Enter the comma-separated list of passwords corresponding to key aliases.Note: When an identity certificate file (JKS) contains more than one private key, all the private keys must have the same password.If the private keys are protected with different passwords, the private keys cannot be extracted from the keystore.iii.Enter the password of the keystore being imported.c.Click Upload .Chapter 2 Upload an SSL Certificate 2-34SAML (Authentication & Authorization) 1.Note that Message Protection is automatically selected as the only available certificate category and cannot be deselected.Use this option to upload a keystore certificate with SAML token support.Create, read, update, and delete (CRUD) operations are supported with this type of certificate.2.Click Browse , then select the certificate file ( .cer or .crt) to upload.3.Click Upload .PGP (Encryption & Decryption) 1.Select a certificate category.Pretty Good Privacy (PGP) provides cryptographic privacy and authentication for communication.PGP is used for signing, encrypting, and decrypting files.You can select the private key to use for encryption or decryption when configuring the stage file action.a.Private : Uses a private key of the target location to decrypt the file.i.Click Browse , then select the PGP file to upload. |
Note: When an identity certificate file (JKS) contains more than one private key, all the private keys must have the same password.If the private keys are protected with different passwords, the private keys cannot be extracted from the keystore.iii.Enter the password of the keystore being imported.c.Click Upload .Chapter 2 Upload an SSL Certificate 2-34SAML (Authentication & Authorization) 1.Note that Message Protection is automatically selected as the only available certificate category and cannot be deselected.Use this option to upload a keystore certificate with SAML token support.Create, read, update, and delete (CRUD) operations are supported with this type of certificate.2.Click Browse , then select the certificate file ( .cer or .crt) to upload.3.Click Upload .PGP (Encryption & Decryption) 1.Select a certificate category.Pretty Good Privacy (PGP) provides cryptographic privacy and authentication for communication.PGP is used for signing, encrypting, and decrypting files.You can select the private key to use for encryption or decryption when configuring the stage file action.a.Private : Uses a private key of the target location to decrypt the file.i.Click Browse , then select the PGP file to upload.ii.Enter the PGP private key password. |
If the private keys are protected with different passwords, the private keys cannot be extracted from the keystore.iii.Enter the password of the keystore being imported.c.Click Upload .Chapter 2 Upload an SSL Certificate 2-34SAML (Authentication & Authorization) 1.Note that Message Protection is automatically selected as the only available certificate category and cannot be deselected.Use this option to upload a keystore certificate with SAML token support.Create, read, update, and delete (CRUD) operations are supported with this type of certificate.2.Click Browse , then select the certificate file ( .cer or .crt) to upload.3.Click Upload .PGP (Encryption & Decryption) 1.Select a certificate category.Pretty Good Privacy (PGP) provides cryptographic privacy and authentication for communication.PGP is used for signing, encrypting, and decrypting files.You can select the private key to use for encryption or decryption when configuring the stage file action.a.Private : Uses a private key of the target location to decrypt the file.i.Click Browse , then select the PGP file to upload.ii.Enter the PGP private key password.b.Public : Uses a public key of the target location to encrypt the file. |
iii.Enter the password of the keystore being imported.c.Click Upload .Chapter 2 Upload an SSL Certificate 2-34SAML (Authentication & Authorization) 1.Note that Message Protection is automatically selected as the only available certificate category and cannot be deselected.Use this option to upload a keystore certificate with SAML token support.Create, read, update, and delete (CRUD) operations are supported with this type of certificate.2.Click Browse , then select the certificate file ( .cer or .crt) to upload.3.Click Upload .PGP (Encryption & Decryption) 1.Select a certificate category.Pretty Good Privacy (PGP) provides cryptographic privacy and authentication for communication.PGP is used for signing, encrypting, and decrypting files.You can select the private key to use for encryption or decryption when configuring the stage file action.a.Private : Uses a private key of the target location to decrypt the file.i.Click Browse , then select the PGP file to upload.ii.Enter the PGP private key password.b.Public : Uses a public key of the target location to encrypt the file.i.Click Browse , then select the PGP file to upload. |
c.Click Upload .Chapter 2 Upload an SSL Certificate 2-34SAML (Authentication & Authorization) 1.Note that Message Protection is automatically selected as the only available certificate category and cannot be deselected.Use this option to upload a keystore certificate with SAML token support.Create, read, update, and delete (CRUD) operations are supported with this type of certificate.2.Click Browse , then select the certificate file ( .cer or .crt) to upload.3.Click Upload .PGP (Encryption & Decryption) 1.Select a certificate category.Pretty Good Privacy (PGP) provides cryptographic privacy and authentication for communication.PGP is used for signing, encrypting, and decrypting files.You can select the private key to use for encryption or decryption when configuring the stage file action.a.Private : Uses a private key of the target location to decrypt the file.i.Click Browse , then select the PGP file to upload.ii.Enter the PGP private key password.b.Public : Uses a public key of the target location to encrypt the file.i.Click Browse , then select the PGP file to upload.ii.In the ASCII-Armor Encryption Format field, select Yes or No. |
Use this option to upload a keystore certificate with SAML token support.Create, read, update, and delete (CRUD) operations are supported with this type of certificate.2.Click Browse , then select the certificate file ( .cer or .crt) to upload.3.Click Upload .PGP (Encryption & Decryption) 1.Select a certificate category.Pretty Good Privacy (PGP) provides cryptographic privacy and authentication for communication.PGP is used for signing, encrypting, and decrypting files.You can select the private key to use for encryption or decryption when configuring the stage file action.a.Private : Uses a private key of the target location to decrypt the file.i.Click Browse , then select the PGP file to upload.ii.Enter the PGP private key password.b.Public : Uses a public key of the target location to encrypt the file.i.Click Browse , then select the PGP file to upload.ii.In the ASCII-Armor Encryption Format field, select Yes or No.Yes shows the format of the encrypted message in ASCII armor. |
Create, read, update, and delete (CRUD) operations are supported with this type of certificate.2.Click Browse , then select the certificate file ( .cer or .crt) to upload.3.Click Upload .PGP (Encryption & Decryption) 1.Select a certificate category.Pretty Good Privacy (PGP) provides cryptographic privacy and authentication for communication.PGP is used for signing, encrypting, and decrypting files.You can select the private key to use for encryption or decryption when configuring the stage file action.a.Private : Uses a private key of the target location to decrypt the file.i.Click Browse , then select the PGP file to upload.ii.Enter the PGP private key password.b.Public : Uses a public key of the target location to encrypt the file.i.Click Browse , then select the PGP file to upload.ii.In the ASCII-Armor Encryption Format field, select Yes or No.Yes shows the format of the encrypted message in ASCII armor.ASCII armor is a binary-to- textual encoding converter. |
2.Click Browse , then select the certificate file ( .cer or .crt) to upload.3.Click Upload .PGP (Encryption & Decryption) 1.Select a certificate category.Pretty Good Privacy (PGP) provides cryptographic privacy and authentication for communication.PGP is used for signing, encrypting, and decrypting files.You can select the private key to use for encryption or decryption when configuring the stage file action.a.Private : Uses a private key of the target location to decrypt the file.i.Click Browse , then select the PGP file to upload.ii.Enter the PGP private key password.b.Public : Uses a public key of the target location to encrypt the file.i.Click Browse , then select the PGP file to upload.ii.In the ASCII-Armor Encryption Format field, select Yes or No.Yes shows the format of the encrypted message in ASCII armor.ASCII armor is a binary-to- textual encoding converter.ASCII armor formats encrypted messaging in ASCII. |
3.Click Upload .PGP (Encryption & Decryption) 1.Select a certificate category.Pretty Good Privacy (PGP) provides cryptographic privacy and authentication for communication.PGP is used for signing, encrypting, and decrypting files.You can select the private key to use for encryption or decryption when configuring the stage file action.a.Private : Uses a private key of the target location to decrypt the file.i.Click Browse , then select the PGP file to upload.ii.Enter the PGP private key password.b.Public : Uses a public key of the target location to encrypt the file.i.Click Browse , then select the PGP file to upload.ii.In the ASCII-Armor Encryption Format field, select Yes or No.Yes shows the format of the encrypted message in ASCII armor.ASCII armor is a binary-to- textual encoding converter.ASCII armor formats encrypted messaging in ASCII.This enables messages to be sent in a standard messaging format. |
PGP (Encryption & Decryption) 1.Select a certificate category.Pretty Good Privacy (PGP) provides cryptographic privacy and authentication for communication.PGP is used for signing, encrypting, and decrypting files.You can select the private key to use for encryption or decryption when configuring the stage file action.a.Private : Uses a private key of the target location to decrypt the file.i.Click Browse , then select the PGP file to upload.ii.Enter the PGP private key password.b.Public : Uses a public key of the target location to encrypt the file.i.Click Browse , then select the PGP file to upload.ii.In the ASCII-Armor Encryption Format field, select Yes or No.Yes shows the format of the encrypted message in ASCII armor.ASCII armor is a binary-to- textual encoding converter.ASCII armor formats encrypted messaging in ASCII.This enables messages to be sent in a standard messaging format.This selection impacts the visibility of message content. |
Pretty Good Privacy (PGP) provides cryptographic privacy and authentication for communication.PGP is used for signing, encrypting, and decrypting files.You can select the private key to use for encryption or decryption when configuring the stage file action.a.Private : Uses a private key of the target location to decrypt the file.i.Click Browse , then select the PGP file to upload.ii.Enter the PGP private key password.b.Public : Uses a public key of the target location to encrypt the file.i.Click Browse , then select the PGP file to upload.ii.In the ASCII-Armor Encryption Format field, select Yes or No.Yes shows the format of the encrypted message in ASCII armor.ASCII armor is a binary-to- textual encoding converter.ASCII armor formats encrypted messaging in ASCII.This enables messages to be sent in a standard messaging format.This selection impacts the visibility of message content.No causes the message to be sent in binary format. |
PGP is used for signing, encrypting, and decrypting files.You can select the private key to use for encryption or decryption when configuring the stage file action.a.Private : Uses a private key of the target location to decrypt the file.i.Click Browse , then select the PGP file to upload.ii.Enter the PGP private key password.b.Public : Uses a public key of the target location to encrypt the file.i.Click Browse , then select the PGP file to upload.ii.In the ASCII-Armor Encryption Format field, select Yes or No.Yes shows the format of the encrypted message in ASCII armor.ASCII armor is a binary-to- textual encoding converter.ASCII armor formats encrypted messaging in ASCII.This enables messages to be sent in a standard messaging format.This selection impacts the visibility of message content.No causes the message to be sent in binary format.iii.From the Cipher Algorithm list, select the algorithm to use. |
You can select the private key to use for encryption or decryption when configuring the stage file action.a.Private : Uses a private key of the target location to decrypt the file.i.Click Browse , then select the PGP file to upload.ii.Enter the PGP private key password.b.Public : Uses a public key of the target location to encrypt the file.i.Click Browse , then select the PGP file to upload.ii.In the ASCII-Armor Encryption Format field, select Yes or No.Yes shows the format of the encrypted message in ASCII armor.ASCII armor is a binary-to- textual encoding converter.ASCII armor formats encrypted messaging in ASCII.This enables messages to be sent in a standard messaging format.This selection impacts the visibility of message content.No causes the message to be sent in binary format.iii.From the Cipher Algorithm list, select the algorithm to use.Symmetric-key algorithms for cryptography use the same cryptographic keys for both encryption of plain text and decryption of cipher text. |
a.Private : Uses a private key of the target location to decrypt the file.i.Click Browse , then select the PGP file to upload.ii.Enter the PGP private key password.b.Public : Uses a public key of the target location to encrypt the file.i.Click Browse , then select the PGP file to upload.ii.In the ASCII-Armor Encryption Format field, select Yes or No.Yes shows the format of the encrypted message in ASCII armor.ASCII armor is a binary-to- textual encoding converter.ASCII armor formats encrypted messaging in ASCII.This enables messages to be sent in a standard messaging format.This selection impacts the visibility of message content.No causes the message to be sent in binary format.iii.From the Cipher Algorithm list, select the algorithm to use.Symmetric-key algorithms for cryptography use the same cryptographic keys for both encryption of plain text and decryption of cipher text.c.Click Upload . |
i.Click Browse , then select the PGP file to upload.ii.Enter the PGP private key password.b.Public : Uses a public key of the target location to encrypt the file.i.Click Browse , then select the PGP file to upload.ii.In the ASCII-Armor Encryption Format field, select Yes or No.Yes shows the format of the encrypted message in ASCII armor.ASCII armor is a binary-to- textual encoding converter.ASCII armor formats encrypted messaging in ASCII.This enables messages to be sent in a standard messaging format.This selection impacts the visibility of message content.No causes the message to be sent in binary format.iii.From the Cipher Algorithm list, select the algorithm to use.Symmetric-key algorithms for cryptography use the same cryptographic keys for both encryption of plain text and decryption of cipher text.c.Click Upload .Refresh Integration Metadata You can manually refresh the currently-cached metadata available to adapters that have implemented metadata caching. |
ii.Enter the PGP private key password.b.Public : Uses a public key of the target location to encrypt the file.i.Click Browse , then select the PGP file to upload.ii.In the ASCII-Armor Encryption Format field, select Yes or No.Yes shows the format of the encrypted message in ASCII armor.ASCII armor is a binary-to- textual encoding converter.ASCII armor formats encrypted messaging in ASCII.This enables messages to be sent in a standard messaging format.This selection impacts the visibility of message content.No causes the message to be sent in binary format.iii.From the Cipher Algorithm list, select the algorithm to use.Symmetric-key algorithms for cryptography use the same cryptographic keys for both encryption of plain text and decryption of cipher text.c.Click Upload .Refresh Integration Metadata You can manually refresh the currently-cached metadata available to adapters that have implemented metadata caching.Metadata changes typically relate to customizations of integrations, such as adding custom objects and attributes to integrations. |
b.Public : Uses a public key of the target location to encrypt the file.i.Click Browse , then select the PGP file to upload.ii.In the ASCII-Armor Encryption Format field, select Yes or No.Yes shows the format of the encrypted message in ASCII armor.ASCII armor is a binary-to- textual encoding converter.ASCII armor formats encrypted messaging in ASCII.This enables messages to be sent in a standard messaging format.This selection impacts the visibility of message content.No causes the message to be sent in binary format.iii.From the Cipher Algorithm list, select the algorithm to use.Symmetric-key algorithms for cryptography use the same cryptographic keys for both encryption of plain text and decryption of cipher text.c.Click Upload .Refresh Integration Metadata You can manually refresh the currently-cached metadata available to adapters that have implemented metadata caching.Metadata changes typically relate to customizations of integrations, such as adding custom objects and attributes to integrations.There may also be cases in which integrations have been patched, which results in additional custom objects and attributes being added. |
i.Click Browse , then select the PGP file to upload.ii.In the ASCII-Armor Encryption Format field, select Yes or No.Yes shows the format of the encrypted message in ASCII armor.ASCII armor is a binary-to- textual encoding converter.ASCII armor formats encrypted messaging in ASCII.This enables messages to be sent in a standard messaging format.This selection impacts the visibility of message content.No causes the message to be sent in binary format.iii.From the Cipher Algorithm list, select the algorithm to use.Symmetric-key algorithms for cryptography use the same cryptographic keys for both encryption of plain text and decryption of cipher text.c.Click Upload .Refresh Integration Metadata You can manually refresh the currently-cached metadata available to adapters that have implemented metadata caching.Metadata changes typically relate to customizations of integrations, such as adding custom objects and attributes to integrations.There may also be cases in which integrations have been patched, which results in additional custom objects and attributes being added.This option is similar to clearing the cache in your browser. |
ii.In the ASCII-Armor Encryption Format field, select Yes or No.Yes shows the format of the encrypted message in ASCII armor.ASCII armor is a binary-to- textual encoding converter.ASCII armor formats encrypted messaging in ASCII.This enables messages to be sent in a standard messaging format.This selection impacts the visibility of message content.No causes the message to be sent in binary format.iii.From the Cipher Algorithm list, select the algorithm to use.Symmetric-key algorithms for cryptography use the same cryptographic keys for both encryption of plain text and decryption of cipher text.c.Click Upload .Refresh Integration Metadata You can manually refresh the currently-cached metadata available to adapters that have implemented metadata caching.Metadata changes typically relate to customizations of integrations, such as adding custom objects and attributes to integrations.There may also be cases in which integrations have been patched, which results in additional custom objects and attributes being added.This option is similar to clearing the cache in your browser.Without a manual refresh, a staleness check is only performed when you drag a connection into an integration. |
Yes shows the format of the encrypted message in ASCII armor.ASCII armor is a binary-to- textual encoding converter.ASCII armor formats encrypted messaging in ASCII.This enables messages to be sent in a standard messaging format.This selection impacts the visibility of message content.No causes the message to be sent in binary format.iii.From the Cipher Algorithm list, select the algorithm to use.Symmetric-key algorithms for cryptography use the same cryptographic keys for both encryption of plain text and decryption of cipher text.c.Click Upload .Refresh Integration Metadata You can manually refresh the currently-cached metadata available to adapters that have implemented metadata caching.Metadata changes typically relate to customizations of integrations, such as adding custom objects and attributes to integrations.There may also be cases in which integrations have been patched, which results in additional custom objects and attributes being added.This option is similar to clearing the cache in your browser.Without a manual refresh, a staleness check is only performed when you drag a connection into an integration.This is typically sufficient, but in some cases you may know that a refresh is required. |
ASCII armor is a binary-to- textual encoding converter.ASCII armor formats encrypted messaging in ASCII.This enables messages to be sent in a standard messaging format.This selection impacts the visibility of message content.No causes the message to be sent in binary format.iii.From the Cipher Algorithm list, select the algorithm to use.Symmetric-key algorithms for cryptography use the same cryptographic keys for both encryption of plain text and decryption of cipher text.c.Click Upload .Refresh Integration Metadata You can manually refresh the currently-cached metadata available to adapters that have implemented metadata caching.Metadata changes typically relate to customizations of integrations, such as adding custom objects and attributes to integrations.There may also be cases in which integrations have been patched, which results in additional custom objects and attributes being added.This option is similar to clearing the cache in your browser.Without a manual refresh, a staleness check is only performed when you drag a connection into an integration.This is typically sufficient, but in some cases you may know that a refresh is required.For these cases, the Refresh Metadata menu option is provided. |
ASCII armor formats encrypted messaging in ASCII.This enables messages to be sent in a standard messaging format.This selection impacts the visibility of message content.No causes the message to be sent in binary format.iii.From the Cipher Algorithm list, select the algorithm to use.Symmetric-key algorithms for cryptography use the same cryptographic keys for both encryption of plain text and decryption of cipher text.c.Click Upload .Refresh Integration Metadata You can manually refresh the currently-cached metadata available to adapters that have implemented metadata caching.Metadata changes typically relate to customizations of integrations, such as adding custom objects and attributes to integrations.There may also be cases in which integrations have been patched, which results in additional custom objects and attributes being added.This option is similar to clearing the cache in your browser.Without a manual refresh, a staleness check is only performed when you drag a connection into an integration.This is typically sufficient, but in some cases you may know that a refresh is required.For these cases, the Refresh Metadata menu option is provided.To refresh integration metadata: Note: The Refresh Metadata menu option is only available with adapters that have implemented metadata caching.Chapter 2 Refresh Integration Metadata 2-351.In the left navigation pane, click Home > Integrations > Connections . |
This enables messages to be sent in a standard messaging format.This selection impacts the visibility of message content.No causes the message to be sent in binary format.iii.From the Cipher Algorithm list, select the algorithm to use.Symmetric-key algorithms for cryptography use the same cryptographic keys for both encryption of plain text and decryption of cipher text.c.Click Upload .Refresh Integration Metadata You can manually refresh the currently-cached metadata available to adapters that have implemented metadata caching.Metadata changes typically relate to customizations of integrations, such as adding custom objects and attributes to integrations.There may also be cases in which integrations have been patched, which results in additional custom objects and attributes being added.This option is similar to clearing the cache in your browser.Without a manual refresh, a staleness check is only performed when you drag a connection into an integration.This is typically sufficient, but in some cases you may know that a refresh is required.For these cases, the Refresh Metadata menu option is provided.To refresh integration metadata: Note: The Refresh Metadata menu option is only available with adapters that have implemented metadata caching.Chapter 2 Refresh Integration Metadata 2-351.In the left navigation pane, click Home > Integrations > Connections .2.Go to the row of the connection to refresh. |
This selection impacts the visibility of message content.No causes the message to be sent in binary format.iii.From the Cipher Algorithm list, select the algorithm to use.Symmetric-key algorithms for cryptography use the same cryptographic keys for both encryption of plain text and decryption of cipher text.c.Click Upload .Refresh Integration Metadata You can manually refresh the currently-cached metadata available to adapters that have implemented metadata caching.Metadata changes typically relate to customizations of integrations, such as adding custom objects and attributes to integrations.There may also be cases in which integrations have been patched, which results in additional custom objects and attributes being added.This option is similar to clearing the cache in your browser.Without a manual refresh, a staleness check is only performed when you drag a connection into an integration.This is typically sufficient, but in some cases you may know that a refresh is required.For these cases, the Refresh Metadata menu option is provided.To refresh integration metadata: Note: The Refresh Metadata menu option is only available with adapters that have implemented metadata caching.Chapter 2 Refresh Integration Metadata 2-351.In the left navigation pane, click Home > Integrations > Connections .2.Go to the row of the connection to refresh.3.Select Refresh Metadata from the menu. |
No causes the message to be sent in binary format.iii.From the Cipher Algorithm list, select the algorithm to use.Symmetric-key algorithms for cryptography use the same cryptographic keys for both encryption of plain text and decryption of cipher text.c.Click Upload .Refresh Integration Metadata You can manually refresh the currently-cached metadata available to adapters that have implemented metadata caching.Metadata changes typically relate to customizations of integrations, such as adding custom objects and attributes to integrations.There may also be cases in which integrations have been patched, which results in additional custom objects and attributes being added.This option is similar to clearing the cache in your browser.Without a manual refresh, a staleness check is only performed when you drag a connection into an integration.This is typically sufficient, but in some cases you may know that a refresh is required.For these cases, the Refresh Metadata menu option is provided.To refresh integration metadata: Note: The Refresh Metadata menu option is only available with adapters that have implemented metadata caching.Chapter 2 Refresh Integration Metadata 2-351.In the left navigation pane, click Home > Integrations > Connections .2.Go to the row of the connection to refresh.3.Select Refresh Metadata from the menu.A message is displayed indicating that the refresh was successful. |
iii.From the Cipher Algorithm list, select the algorithm to use.Symmetric-key algorithms for cryptography use the same cryptographic keys for both encryption of plain text and decryption of cipher text.c.Click Upload .Refresh Integration Metadata You can manually refresh the currently-cached metadata available to adapters that have implemented metadata caching.Metadata changes typically relate to customizations of integrations, such as adding custom objects and attributes to integrations.There may also be cases in which integrations have been patched, which results in additional custom objects and attributes being added.This option is similar to clearing the cache in your browser.Without a manual refresh, a staleness check is only performed when you drag a connection into an integration.This is typically sufficient, but in some cases you may know that a refresh is required.For these cases, the Refresh Metadata menu option is provided.To refresh integration metadata: Note: The Refresh Metadata menu option is only available with adapters that have implemented metadata caching.Chapter 2 Refresh Integration Metadata 2-351.In the left navigation pane, click Home > Integrations > Connections .2.Go to the row of the connection to refresh.3.Select Refresh Metadata from the menu.A message is displayed indicating that the refresh was successful.Metadata refresh for connection " connection_type " has been initiated successfully.Chapter 2 Refresh Integration Metadata 2-363 Add the Oracle CX Sales and B2B Service Adapter to an Integration When you drag the Oracle CX Sales and B2B Service Adapter into the trigger or invoke area of an integration, the Adapter Endpoint Configuration Wizard appears. |
Symmetric-key algorithms for cryptography use the same cryptographic keys for both encryption of plain text and decryption of cipher text.c.Click Upload .Refresh Integration Metadata You can manually refresh the currently-cached metadata available to adapters that have implemented metadata caching.Metadata changes typically relate to customizations of integrations, such as adding custom objects and attributes to integrations.There may also be cases in which integrations have been patched, which results in additional custom objects and attributes being added.This option is similar to clearing the cache in your browser.Without a manual refresh, a staleness check is only performed when you drag a connection into an integration.This is typically sufficient, but in some cases you may know that a refresh is required.For these cases, the Refresh Metadata menu option is provided.To refresh integration metadata: Note: The Refresh Metadata menu option is only available with adapters that have implemented metadata caching.Chapter 2 Refresh Integration Metadata 2-351.In the left navigation pane, click Home > Integrations > Connections .2.Go to the row of the connection to refresh.3.Select Refresh Metadata from the menu.A message is displayed indicating that the refresh was successful.Metadata refresh for connection " connection_type " has been initiated successfully.Chapter 2 Refresh Integration Metadata 2-363 Add the Oracle CX Sales and B2B Service Adapter to an Integration When you drag the Oracle CX Sales and B2B Service Adapter into the trigger or invoke area of an integration, the Adapter Endpoint Configuration Wizard appears.This wizard guides you through the configuration of the Oracle CX Sales and B2B Service Adapter endpoint properties. |
c.Click Upload .Refresh Integration Metadata You can manually refresh the currently-cached metadata available to adapters that have implemented metadata caching.Metadata changes typically relate to customizations of integrations, such as adding custom objects and attributes to integrations.There may also be cases in which integrations have been patched, which results in additional custom objects and attributes being added.This option is similar to clearing the cache in your browser.Without a manual refresh, a staleness check is only performed when you drag a connection into an integration.This is typically sufficient, but in some cases you may know that a refresh is required.For these cases, the Refresh Metadata menu option is provided.To refresh integration metadata: Note: The Refresh Metadata menu option is only available with adapters that have implemented metadata caching.Chapter 2 Refresh Integration Metadata 2-351.In the left navigation pane, click Home > Integrations > Connections .2.Go to the row of the connection to refresh.3.Select Refresh Metadata from the menu.A message is displayed indicating that the refresh was successful.Metadata refresh for connection " connection_type " has been initiated successfully.Chapter 2 Refresh Integration Metadata 2-363 Add the Oracle CX Sales and B2B Service Adapter to an Integration When you drag the Oracle CX Sales and B2B Service Adapter into the trigger or invoke area of an integration, the Adapter Endpoint Configuration Wizard appears.This wizard guides you through the configuration of the Oracle CX Sales and B2B Service Adapter endpoint properties.These topics describe the wizard pages that guide you through configuration of the Oracle CX Sales and B2B Service Adapter as a trigger or invoke in an integration. |
Refresh Integration Metadata You can manually refresh the currently-cached metadata available to adapters that have implemented metadata caching.Metadata changes typically relate to customizations of integrations, such as adding custom objects and attributes to integrations.There may also be cases in which integrations have been patched, which results in additional custom objects and attributes being added.This option is similar to clearing the cache in your browser.Without a manual refresh, a staleness check is only performed when you drag a connection into an integration.This is typically sufficient, but in some cases you may know that a refresh is required.For these cases, the Refresh Metadata menu option is provided.To refresh integration metadata: Note: The Refresh Metadata menu option is only available with adapters that have implemented metadata caching.Chapter 2 Refresh Integration Metadata 2-351.In the left navigation pane, click Home > Integrations > Connections .2.Go to the row of the connection to refresh.3.Select Refresh Metadata from the menu.A message is displayed indicating that the refresh was successful.Metadata refresh for connection " connection_type " has been initiated successfully.Chapter 2 Refresh Integration Metadata 2-363 Add the Oracle CX Sales and B2B Service Adapter to an Integration When you drag the Oracle CX Sales and B2B Service Adapter into the trigger or invoke area of an integration, the Adapter Endpoint Configuration Wizard appears.This wizard guides you through the configuration of the Oracle CX Sales and B2B Service Adapter endpoint properties.These topics describe the wizard pages that guide you through configuration of the Oracle CX Sales and B2B Service Adapter as a trigger or invoke in an integration.Topics: Basic Info Page Trigger Request Page Trigger Response Page Invoke Operations Page Invoke Child Resources Page Summary Page Basic Info Page You can enter a name and description on the Basic Info page of each adapter in your integration. |
Metadata changes typically relate to customizations of integrations, such as adding custom objects and attributes to integrations.There may also be cases in which integrations have been patched, which results in additional custom objects and attributes being added.This option is similar to clearing the cache in your browser.Without a manual refresh, a staleness check is only performed when you drag a connection into an integration.This is typically sufficient, but in some cases you may know that a refresh is required.For these cases, the Refresh Metadata menu option is provided.To refresh integration metadata: Note: The Refresh Metadata menu option is only available with adapters that have implemented metadata caching.Chapter 2 Refresh Integration Metadata 2-351.In the left navigation pane, click Home > Integrations > Connections .2.Go to the row of the connection to refresh.3.Select Refresh Metadata from the menu.A message is displayed indicating that the refresh was successful.Metadata refresh for connection " connection_type " has been initiated successfully.Chapter 2 Refresh Integration Metadata 2-363 Add the Oracle CX Sales and B2B Service Adapter to an Integration When you drag the Oracle CX Sales and B2B Service Adapter into the trigger or invoke area of an integration, the Adapter Endpoint Configuration Wizard appears.This wizard guides you through the configuration of the Oracle CX Sales and B2B Service Adapter endpoint properties.These topics describe the wizard pages that guide you through configuration of the Oracle CX Sales and B2B Service Adapter as a trigger or invoke in an integration.Topics: Basic Info Page Trigger Request Page Trigger Response Page Invoke Operations Page Invoke Child Resources Page Summary Page Basic Info Page You can enter a name and description on the Basic Info page of each adapter in your integration.Element Description What do you want to call your endpoint?Provide a meaningful name so that others can understand the responsibilities of this connection. |
There may also be cases in which integrations have been patched, which results in additional custom objects and attributes being added.This option is similar to clearing the cache in your browser.Without a manual refresh, a staleness check is only performed when you drag a connection into an integration.This is typically sufficient, but in some cases you may know that a refresh is required.For these cases, the Refresh Metadata menu option is provided.To refresh integration metadata: Note: The Refresh Metadata menu option is only available with adapters that have implemented metadata caching.Chapter 2 Refresh Integration Metadata 2-351.In the left navigation pane, click Home > Integrations > Connections .2.Go to the row of the connection to refresh.3.Select Refresh Metadata from the menu.A message is displayed indicating that the refresh was successful.Metadata refresh for connection " connection_type " has been initiated successfully.Chapter 2 Refresh Integration Metadata 2-363 Add the Oracle CX Sales and B2B Service Adapter to an Integration When you drag the Oracle CX Sales and B2B Service Adapter into the trigger or invoke area of an integration, the Adapter Endpoint Configuration Wizard appears.This wizard guides you through the configuration of the Oracle CX Sales and B2B Service Adapter endpoint properties.These topics describe the wizard pages that guide you through configuration of the Oracle CX Sales and B2B Service Adapter as a trigger or invoke in an integration.Topics: Basic Info Page Trigger Request Page Trigger Response Page Invoke Operations Page Invoke Child Resources Page Summary Page Basic Info Page You can enter a name and description on the Basic Info page of each adapter in your integration.Element Description What do you want to call your endpoint?Provide a meaningful name so that others can understand the responsibilities of this connection.You can include English alphabetic characters, numbers, underscores, and hyphens in the name. |
This option is similar to clearing the cache in your browser.Without a manual refresh, a staleness check is only performed when you drag a connection into an integration.This is typically sufficient, but in some cases you may know that a refresh is required.For these cases, the Refresh Metadata menu option is provided.To refresh integration metadata: Note: The Refresh Metadata menu option is only available with adapters that have implemented metadata caching.Chapter 2 Refresh Integration Metadata 2-351.In the left navigation pane, click Home > Integrations > Connections .2.Go to the row of the connection to refresh.3.Select Refresh Metadata from the menu.A message is displayed indicating that the refresh was successful.Metadata refresh for connection " connection_type " has been initiated successfully.Chapter 2 Refresh Integration Metadata 2-363 Add the Oracle CX Sales and B2B Service Adapter to an Integration When you drag the Oracle CX Sales and B2B Service Adapter into the trigger or invoke area of an integration, the Adapter Endpoint Configuration Wizard appears.This wizard guides you through the configuration of the Oracle CX Sales and B2B Service Adapter endpoint properties.These topics describe the wizard pages that guide you through configuration of the Oracle CX Sales and B2B Service Adapter as a trigger or invoke in an integration.Topics: Basic Info Page Trigger Request Page Trigger Response Page Invoke Operations Page Invoke Child Resources Page Summary Page Basic Info Page You can enter a name and description on the Basic Info page of each adapter in your integration.Element Description What do you want to call your endpoint?Provide a meaningful name so that others can understand the responsibilities of this connection.You can include English alphabetic characters, numbers, underscores, and hyphens in the name.You cant include the following characters: No blank spaces (for example, My Inbound Connection ) No special characters (for example, #;83& or righ(t)now4 ) except underscores and hyphens No multibyte characters What does this endpoint do?Enter an optional description of the connection's responsibilities. |
Without a manual refresh, a staleness check is only performed when you drag a connection into an integration.This is typically sufficient, but in some cases you may know that a refresh is required.For these cases, the Refresh Metadata menu option is provided.To refresh integration metadata: Note: The Refresh Metadata menu option is only available with adapters that have implemented metadata caching.Chapter 2 Refresh Integration Metadata 2-351.In the left navigation pane, click Home > Integrations > Connections .2.Go to the row of the connection to refresh.3.Select Refresh Metadata from the menu.A message is displayed indicating that the refresh was successful.Metadata refresh for connection " connection_type " has been initiated successfully.Chapter 2 Refresh Integration Metadata 2-363 Add the Oracle CX Sales and B2B Service Adapter to an Integration When you drag the Oracle CX Sales and B2B Service Adapter into the trigger or invoke area of an integration, the Adapter Endpoint Configuration Wizard appears.This wizard guides you through the configuration of the Oracle CX Sales and B2B Service Adapter endpoint properties.These topics describe the wizard pages that guide you through configuration of the Oracle CX Sales and B2B Service Adapter as a trigger or invoke in an integration.Topics: Basic Info Page Trigger Request Page Trigger Response Page Invoke Operations Page Invoke Child Resources Page Summary Page Basic Info Page You can enter a name and description on the Basic Info page of each adapter in your integration.Element Description What do you want to call your endpoint?Provide a meaningful name so that others can understand the responsibilities of this connection.You can include English alphabetic characters, numbers, underscores, and hyphens in the name.You cant include the following characters: No blank spaces (for example, My Inbound Connection ) No special characters (for example, #;83& or righ(t)now4 ) except underscores and hyphens No multibyte characters What does this endpoint do?Enter an optional description of the connection's responsibilities.For example: This connection receives an inbound request to synchronize account information with the cloud application. |
This is typically sufficient, but in some cases you may know that a refresh is required.For these cases, the Refresh Metadata menu option is provided.To refresh integration metadata: Note: The Refresh Metadata menu option is only available with adapters that have implemented metadata caching.Chapter 2 Refresh Integration Metadata 2-351.In the left navigation pane, click Home > Integrations > Connections .2.Go to the row of the connection to refresh.3.Select Refresh Metadata from the menu.A message is displayed indicating that the refresh was successful.Metadata refresh for connection " connection_type " has been initiated successfully.Chapter 2 Refresh Integration Metadata 2-363 Add the Oracle CX Sales and B2B Service Adapter to an Integration When you drag the Oracle CX Sales and B2B Service Adapter into the trigger or invoke area of an integration, the Adapter Endpoint Configuration Wizard appears.This wizard guides you through the configuration of the Oracle CX Sales and B2B Service Adapter endpoint properties.These topics describe the wizard pages that guide you through configuration of the Oracle CX Sales and B2B Service Adapter as a trigger or invoke in an integration.Topics: Basic Info Page Trigger Request Page Trigger Response Page Invoke Operations Page Invoke Child Resources Page Summary Page Basic Info Page You can enter a name and description on the Basic Info page of each adapter in your integration.Element Description What do you want to call your endpoint?Provide a meaningful name so that others can understand the responsibilities of this connection.You can include English alphabetic characters, numbers, underscores, and hyphens in the name.You cant include the following characters: No blank spaces (for example, My Inbound Connection ) No special characters (for example, #;83& or righ(t)now4 ) except underscores and hyphens No multibyte characters What does this endpoint do?Enter an optional description of the connection's responsibilities.For example: This connection receives an inbound request to synchronize account information with the cloud application.Trigger Request Page Enter the Oracle CX Sales and B2B Service connection trigger request values for your integration. |
For these cases, the Refresh Metadata menu option is provided.To refresh integration metadata: Note: The Refresh Metadata menu option is only available with adapters that have implemented metadata caching.Chapter 2 Refresh Integration Metadata 2-351.In the left navigation pane, click Home > Integrations > Connections .2.Go to the row of the connection to refresh.3.Select Refresh Metadata from the menu.A message is displayed indicating that the refresh was successful.Metadata refresh for connection " connection_type " has been initiated successfully.Chapter 2 Refresh Integration Metadata 2-363 Add the Oracle CX Sales and B2B Service Adapter to an Integration When you drag the Oracle CX Sales and B2B Service Adapter into the trigger or invoke area of an integration, the Adapter Endpoint Configuration Wizard appears.This wizard guides you through the configuration of the Oracle CX Sales and B2B Service Adapter endpoint properties.These topics describe the wizard pages that guide you through configuration of the Oracle CX Sales and B2B Service Adapter as a trigger or invoke in an integration.Topics: Basic Info Page Trigger Request Page Trigger Response Page Invoke Operations Page Invoke Child Resources Page Summary Page Basic Info Page You can enter a name and description on the Basic Info page of each adapter in your integration.Element Description What do you want to call your endpoint?Provide a meaningful name so that others can understand the responsibilities of this connection.You can include English alphabetic characters, numbers, underscores, and hyphens in the name.You cant include the following characters: No blank spaces (for example, My Inbound Connection ) No special characters (for example, #;83& or righ(t)now4 ) except underscores and hyphens No multibyte characters What does this endpoint do?Enter an optional description of the connection's responsibilities.For example: This connection receives an inbound request to synchronize account information with the cloud application.Trigger Request Page Enter the Oracle CX Sales and B2B Service connection trigger request values for your integration.The values you specify start the integration. |
To refresh integration metadata: Note: The Refresh Metadata menu option is only available with adapters that have implemented metadata caching.Chapter 2 Refresh Integration Metadata 2-351.In the left navigation pane, click Home > Integrations > Connections .2.Go to the row of the connection to refresh.3.Select Refresh Metadata from the menu.A message is displayed indicating that the refresh was successful.Metadata refresh for connection " connection_type " has been initiated successfully.Chapter 2 Refresh Integration Metadata 2-363 Add the Oracle CX Sales and B2B Service Adapter to an Integration When you drag the Oracle CX Sales and B2B Service Adapter into the trigger or invoke area of an integration, the Adapter Endpoint Configuration Wizard appears.This wizard guides you through the configuration of the Oracle CX Sales and B2B Service Adapter endpoint properties.These topics describe the wizard pages that guide you through configuration of the Oracle CX Sales and B2B Service Adapter as a trigger or invoke in an integration.Topics: Basic Info Page Trigger Request Page Trigger Response Page Invoke Operations Page Invoke Child Resources Page Summary Page Basic Info Page You can enter a name and description on the Basic Info page of each adapter in your integration.Element Description What do you want to call your endpoint?Provide a meaningful name so that others can understand the responsibilities of this connection.You can include English alphabetic characters, numbers, underscores, and hyphens in the name.You cant include the following characters: No blank spaces (for example, My Inbound Connection ) No special characters (for example, #;83& or righ(t)now4 ) except underscores and hyphens No multibyte characters What does this endpoint do?Enter an optional description of the connection's responsibilities.For example: This connection receives an inbound request to synchronize account information with the cloud application.Trigger Request Page Enter the Oracle CX Sales and B2B Service connection trigger request values for your integration.The values you specify start the integration.3-1Select the specific type to receive as a request from the Oracle CX Sales and B2B Service. |
2.Go to the row of the connection to refresh.3.Select Refresh Metadata from the menu.A message is displayed indicating that the refresh was successful.Metadata refresh for connection " connection_type " has been initiated successfully.Chapter 2 Refresh Integration Metadata 2-363 Add the Oracle CX Sales and B2B Service Adapter to an Integration When you drag the Oracle CX Sales and B2B Service Adapter into the trigger or invoke area of an integration, the Adapter Endpoint Configuration Wizard appears.This wizard guides you through the configuration of the Oracle CX Sales and B2B Service Adapter endpoint properties.These topics describe the wizard pages that guide you through configuration of the Oracle CX Sales and B2B Service Adapter as a trigger or invoke in an integration.Topics: Basic Info Page Trigger Request Page Trigger Response Page Invoke Operations Page Invoke Child Resources Page Summary Page Basic Info Page You can enter a name and description on the Basic Info page of each adapter in your integration.Element Description What do you want to call your endpoint?Provide a meaningful name so that others can understand the responsibilities of this connection.You can include English alphabetic characters, numbers, underscores, and hyphens in the name.You cant include the following characters: No blank spaces (for example, My Inbound Connection ) No special characters (for example, #;83& or righ(t)now4 ) except underscores and hyphens No multibyte characters What does this endpoint do?Enter an optional description of the connection's responsibilities.For example: This connection receives an inbound request to synchronize account information with the cloud application.Trigger Request Page Enter the Oracle CX Sales and B2B Service connection trigger request values for your integration.The values you specify start the integration.3-1Select the specific type to receive as a request from the Oracle CX Sales and B2B Service.Your ability to select either a business object or event subscription is based on the content of the WSDL file (for business objects) or event catalog URL (for event subscriptions) you specified during Oracle CX Sales and B2B Service Adapter configuration. |
3.Select Refresh Metadata from the menu.A message is displayed indicating that the refresh was successful.Metadata refresh for connection " connection_type " has been initiated successfully.Chapter 2 Refresh Integration Metadata 2-363 Add the Oracle CX Sales and B2B Service Adapter to an Integration When you drag the Oracle CX Sales and B2B Service Adapter into the trigger or invoke area of an integration, the Adapter Endpoint Configuration Wizard appears.This wizard guides you through the configuration of the Oracle CX Sales and B2B Service Adapter endpoint properties.These topics describe the wizard pages that guide you through configuration of the Oracle CX Sales and B2B Service Adapter as a trigger or invoke in an integration.Topics: Basic Info Page Trigger Request Page Trigger Response Page Invoke Operations Page Invoke Child Resources Page Summary Page Basic Info Page You can enter a name and description on the Basic Info page of each adapter in your integration.Element Description What do you want to call your endpoint?Provide a meaningful name so that others can understand the responsibilities of this connection.You can include English alphabetic characters, numbers, underscores, and hyphens in the name.You cant include the following characters: No blank spaces (for example, My Inbound Connection ) No special characters (for example, #;83& or righ(t)now4 ) except underscores and hyphens No multibyte characters What does this endpoint do?Enter an optional description of the connection's responsibilities.For example: This connection receives an inbound request to synchronize account information with the cloud application.Trigger Request Page Enter the Oracle CX Sales and B2B Service connection trigger request values for your integration.The values you specify start the integration.3-1Select the specific type to receive as a request from the Oracle CX Sales and B2B Service.Your ability to select either a business object or event subscription is based on the content of the WSDL file (for business objects) or event catalog URL (for event subscriptions) you specified during Oracle CX Sales and B2B Service Adapter configuration.1.Select to receive a business object as a request from the Oracle CX Sales and B2B Service. |
A message is displayed indicating that the refresh was successful.Metadata refresh for connection " connection_type " has been initiated successfully.Chapter 2 Refresh Integration Metadata 2-363 Add the Oracle CX Sales and B2B Service Adapter to an Integration When you drag the Oracle CX Sales and B2B Service Adapter into the trigger or invoke area of an integration, the Adapter Endpoint Configuration Wizard appears.This wizard guides you through the configuration of the Oracle CX Sales and B2B Service Adapter endpoint properties.These topics describe the wizard pages that guide you through configuration of the Oracle CX Sales and B2B Service Adapter as a trigger or invoke in an integration.Topics: Basic Info Page Trigger Request Page Trigger Response Page Invoke Operations Page Invoke Child Resources Page Summary Page Basic Info Page You can enter a name and description on the Basic Info page of each adapter in your integration.Element Description What do you want to call your endpoint?Provide a meaningful name so that others can understand the responsibilities of this connection.You can include English alphabetic characters, numbers, underscores, and hyphens in the name.You cant include the following characters: No blank spaces (for example, My Inbound Connection ) No special characters (for example, #;83& or righ(t)now4 ) except underscores and hyphens No multibyte characters What does this endpoint do?Enter an optional description of the connection's responsibilities.For example: This connection receives an inbound request to synchronize account information with the cloud application.Trigger Request Page Enter the Oracle CX Sales and B2B Service connection trigger request values for your integration.The values you specify start the integration.3-1Select the specific type to receive as a request from the Oracle CX Sales and B2B Service.Your ability to select either a business object or event subscription is based on the content of the WSDL file (for business objects) or event catalog URL (for event subscriptions) you specified during Oracle CX Sales and B2B Service Adapter configuration.1.Select to receive a business object as a request from the Oracle CX Sales and B2B Service.This selection invokes the integration. |
Metadata refresh for connection " connection_type " has been initiated successfully.Chapter 2 Refresh Integration Metadata 2-363 Add the Oracle CX Sales and B2B Service Adapter to an Integration When you drag the Oracle CX Sales and B2B Service Adapter into the trigger or invoke area of an integration, the Adapter Endpoint Configuration Wizard appears.This wizard guides you through the configuration of the Oracle CX Sales and B2B Service Adapter endpoint properties.These topics describe the wizard pages that guide you through configuration of the Oracle CX Sales and B2B Service Adapter as a trigger or invoke in an integration.Topics: Basic Info Page Trigger Request Page Trigger Response Page Invoke Operations Page Invoke Child Resources Page Summary Page Basic Info Page You can enter a name and description on the Basic Info page of each adapter in your integration.Element Description What do you want to call your endpoint?Provide a meaningful name so that others can understand the responsibilities of this connection.You can include English alphabetic characters, numbers, underscores, and hyphens in the name.You cant include the following characters: No blank spaces (for example, My Inbound Connection ) No special characters (for example, #;83& or righ(t)now4 ) except underscores and hyphens No multibyte characters What does this endpoint do?Enter an optional description of the connection's responsibilities.For example: This connection receives an inbound request to synchronize account information with the cloud application.Trigger Request Page Enter the Oracle CX Sales and B2B Service connection trigger request values for your integration.The values you specify start the integration.3-1Select the specific type to receive as a request from the Oracle CX Sales and B2B Service.Your ability to select either a business object or event subscription is based on the content of the WSDL file (for business objects) or event catalog URL (for event subscriptions) you specified during Oracle CX Sales and B2B Service Adapter configuration.1.Select to receive a business object as a request from the Oracle CX Sales and B2B Service.This selection invokes the integration.2.Select to receive an event subscription raised by the Oracle CX Sales and B2B Service application as a request from the Oracle CX Sales and B2B Service. |
This wizard guides you through the configuration of the Oracle CX Sales and B2B Service Adapter endpoint properties.These topics describe the wizard pages that guide you through configuration of the Oracle CX Sales and B2B Service Adapter as a trigger or invoke in an integration.Topics: Basic Info Page Trigger Request Page Trigger Response Page Invoke Operations Page Invoke Child Resources Page Summary Page Basic Info Page You can enter a name and description on the Basic Info page of each adapter in your integration.Element Description What do you want to call your endpoint?Provide a meaningful name so that others can understand the responsibilities of this connection.You can include English alphabetic characters, numbers, underscores, and hyphens in the name.You cant include the following characters: No blank spaces (for example, My Inbound Connection ) No special characters (for example, #;83& or righ(t)now4 ) except underscores and hyphens No multibyte characters What does this endpoint do?Enter an optional description of the connection's responsibilities.For example: This connection receives an inbound request to synchronize account information with the cloud application.Trigger Request Page Enter the Oracle CX Sales and B2B Service connection trigger request values for your integration.The values you specify start the integration.3-1Select the specific type to receive as a request from the Oracle CX Sales and B2B Service.Your ability to select either a business object or event subscription is based on the content of the WSDL file (for business objects) or event catalog URL (for event subscriptions) you specified during Oracle CX Sales and B2B Service Adapter configuration.1.Select to receive a business object as a request from the Oracle CX Sales and B2B Service.This selection invokes the integration.2.Select to receive an event subscription raised by the Oracle CX Sales and B2B Service application as a request from the Oracle CX Sales and B2B Service.This selection invokes the integration. |
These topics describe the wizard pages that guide you through configuration of the Oracle CX Sales and B2B Service Adapter as a trigger or invoke in an integration.Topics: Basic Info Page Trigger Request Page Trigger Response Page Invoke Operations Page Invoke Child Resources Page Summary Page Basic Info Page You can enter a name and description on the Basic Info page of each adapter in your integration.Element Description What do you want to call your endpoint?Provide a meaningful name so that others can understand the responsibilities of this connection.You can include English alphabetic characters, numbers, underscores, and hyphens in the name.You cant include the following characters: No blank spaces (for example, My Inbound Connection ) No special characters (for example, #;83& or righ(t)now4 ) except underscores and hyphens No multibyte characters What does this endpoint do?Enter an optional description of the connection's responsibilities.For example: This connection receives an inbound request to synchronize account information with the cloud application.Trigger Request Page Enter the Oracle CX Sales and B2B Service connection trigger request values for your integration.The values you specify start the integration.3-1Select the specific type to receive as a request from the Oracle CX Sales and B2B Service.Your ability to select either a business object or event subscription is based on the content of the WSDL file (for business objects) or event catalog URL (for event subscriptions) you specified during Oracle CX Sales and B2B Service Adapter configuration.1.Select to receive a business object as a request from the Oracle CX Sales and B2B Service.This selection invokes the integration.2.Select to receive an event subscription raised by the Oracle CX Sales and B2B Service application as a request from the Oracle CX Sales and B2B Service.This selection invokes the integration.Note: If business events are not displayed for selection, ensure that you configured your URL correctly on the Connections page. |
Topics: Basic Info Page Trigger Request Page Trigger Response Page Invoke Operations Page Invoke Child Resources Page Summary Page Basic Info Page You can enter a name and description on the Basic Info page of each adapter in your integration.Element Description What do you want to call your endpoint?Provide a meaningful name so that others can understand the responsibilities of this connection.You can include English alphabetic characters, numbers, underscores, and hyphens in the name.You cant include the following characters: No blank spaces (for example, My Inbound Connection ) No special characters (for example, #;83& or righ(t)now4 ) except underscores and hyphens No multibyte characters What does this endpoint do?Enter an optional description of the connection's responsibilities.For example: This connection receives an inbound request to synchronize account information with the cloud application.Trigger Request Page Enter the Oracle CX Sales and B2B Service connection trigger request values for your integration.The values you specify start the integration.3-1Select the specific type to receive as a request from the Oracle CX Sales and B2B Service.Your ability to select either a business object or event subscription is based on the content of the WSDL file (for business objects) or event catalog URL (for event subscriptions) you specified during Oracle CX Sales and B2B Service Adapter configuration.1.Select to receive a business object as a request from the Oracle CX Sales and B2B Service.This selection invokes the integration.2.Select to receive an event subscription raised by the Oracle CX Sales and B2B Service application as a request from the Oracle CX Sales and B2B Service.This selection invokes the integration.Note: If business events are not displayed for selection, ensure that you configured your URL correctly on the Connections page.For connections created before the 18 February 2020 release of the simplified connections page, you must explicitly specify the Events Catalog URL. |
Element Description What do you want to call your endpoint?Provide a meaningful name so that others can understand the responsibilities of this connection.You can include English alphabetic characters, numbers, underscores, and hyphens in the name.You cant include the following characters: No blank spaces (for example, My Inbound Connection ) No special characters (for example, #;83& or righ(t)now4 ) except underscores and hyphens No multibyte characters What does this endpoint do?Enter an optional description of the connection's responsibilities.For example: This connection receives an inbound request to synchronize account information with the cloud application.Trigger Request Page Enter the Oracle CX Sales and B2B Service connection trigger request values for your integration.The values you specify start the integration.3-1Select the specific type to receive as a request from the Oracle CX Sales and B2B Service.Your ability to select either a business object or event subscription is based on the content of the WSDL file (for business objects) or event catalog URL (for event subscriptions) you specified during Oracle CX Sales and B2B Service Adapter configuration.1.Select to receive a business object as a request from the Oracle CX Sales and B2B Service.This selection invokes the integration.2.Select to receive an event subscription raised by the Oracle CX Sales and B2B Service application as a request from the Oracle CX Sales and B2B Service.This selection invokes the integration.Note: If business events are not displayed for selection, ensure that you configured your URL correctly on the Connections page.For connections created before the 18 February 2020 release of the simplified connections page, you must explicitly specify the Events Catalog URL.For connections created on or after the 18 February 2020 release of the simplified connections page, you must specify only the Oracle CX Sales and B2B Service host name. |
You can include English alphabetic characters, numbers, underscores, and hyphens in the name.You cant include the following characters: No blank spaces (for example, My Inbound Connection ) No special characters (for example, #;83& or righ(t)now4 ) except underscores and hyphens No multibyte characters What does this endpoint do?Enter an optional description of the connection's responsibilities.For example: This connection receives an inbound request to synchronize account information with the cloud application.Trigger Request Page Enter the Oracle CX Sales and B2B Service connection trigger request values for your integration.The values you specify start the integration.3-1Select the specific type to receive as a request from the Oracle CX Sales and B2B Service.Your ability to select either a business object or event subscription is based on the content of the WSDL file (for business objects) or event catalog URL (for event subscriptions) you specified during Oracle CX Sales and B2B Service Adapter configuration.1.Select to receive a business object as a request from the Oracle CX Sales and B2B Service.This selection invokes the integration.2.Select to receive an event subscription raised by the Oracle CX Sales and B2B Service application as a request from the Oracle CX Sales and B2B Service.This selection invokes the integration.Note: If business events are not displayed for selection, ensure that you configured your URL correctly on the Connections page.For connections created before the 18 February 2020 release of the simplified connections page, you must explicitly specify the Events Catalog URL.For connections created on or after the 18 February 2020 release of the simplified connections page, you must specify only the Oracle CX Sales and B2B Service host name.See Configure Connection Properties . |
You cant include the following characters: No blank spaces (for example, My Inbound Connection ) No special characters (for example, #;83& or righ(t)now4 ) except underscores and hyphens No multibyte characters What does this endpoint do?Enter an optional description of the connection's responsibilities.For example: This connection receives an inbound request to synchronize account information with the cloud application.Trigger Request Page Enter the Oracle CX Sales and B2B Service connection trigger request values for your integration.The values you specify start the integration.3-1Select the specific type to receive as a request from the Oracle CX Sales and B2B Service.Your ability to select either a business object or event subscription is based on the content of the WSDL file (for business objects) or event catalog URL (for event subscriptions) you specified during Oracle CX Sales and B2B Service Adapter configuration.1.Select to receive a business object as a request from the Oracle CX Sales and B2B Service.This selection invokes the integration.2.Select to receive an event subscription raised by the Oracle CX Sales and B2B Service application as a request from the Oracle CX Sales and B2B Service.This selection invokes the integration.Note: If business events are not displayed for selection, ensure that you configured your URL correctly on the Connections page.For connections created before the 18 February 2020 release of the simplified connections page, you must explicitly specify the Events Catalog URL.For connections created on or after the 18 February 2020 release of the simplified connections page, you must specify only the Oracle CX Sales and B2B Service host name.See Configure Connection Properties .Element Description Configure a Request Select the request type appropriate to your integration. |
For example: This connection receives an inbound request to synchronize account information with the cloud application.Trigger Request Page Enter the Oracle CX Sales and B2B Service connection trigger request values for your integration.The values you specify start the integration.3-1Select the specific type to receive as a request from the Oracle CX Sales and B2B Service.Your ability to select either a business object or event subscription is based on the content of the WSDL file (for business objects) or event catalog URL (for event subscriptions) you specified during Oracle CX Sales and B2B Service Adapter configuration.1.Select to receive a business object as a request from the Oracle CX Sales and B2B Service.This selection invokes the integration.2.Select to receive an event subscription raised by the Oracle CX Sales and B2B Service application as a request from the Oracle CX Sales and B2B Service.This selection invokes the integration.Note: If business events are not displayed for selection, ensure that you configured your URL correctly on the Connections page.For connections created before the 18 February 2020 release of the simplified connections page, you must explicitly specify the Events Catalog URL.For connections created on or after the 18 February 2020 release of the simplified connections page, you must specify only the Oracle CX Sales and B2B Service host name.See Configure Connection Properties .Element Description Configure a Request Select the request type appropriate to your integration.The fields that are displayed below are based on the request type that you select. |
Trigger Request Page Enter the Oracle CX Sales and B2B Service connection trigger request values for your integration.The values you specify start the integration.3-1Select the specific type to receive as a request from the Oracle CX Sales and B2B Service.Your ability to select either a business object or event subscription is based on the content of the WSDL file (for business objects) or event catalog URL (for event subscriptions) you specified during Oracle CX Sales and B2B Service Adapter configuration.1.Select to receive a business object as a request from the Oracle CX Sales and B2B Service.This selection invokes the integration.2.Select to receive an event subscription raised by the Oracle CX Sales and B2B Service application as a request from the Oracle CX Sales and B2B Service.This selection invokes the integration.Note: If business events are not displayed for selection, ensure that you configured your URL correctly on the Connections page.For connections created before the 18 February 2020 release of the simplified connections page, you must explicitly specify the Events Catalog URL.For connections created on or after the 18 February 2020 release of the simplified connections page, you must specify only the Oracle CX Sales and B2B Service host name.See Configure Connection Properties .Element Description Configure a Request Select the request type appropriate to your integration.The fields that are displayed below are based on the request type that you select.With Business Objects : Select to display a list of business objects. |
The values you specify start the integration.3-1Select the specific type to receive as a request from the Oracle CX Sales and B2B Service.Your ability to select either a business object or event subscription is based on the content of the WSDL file (for business objects) or event catalog URL (for event subscriptions) you specified during Oracle CX Sales and B2B Service Adapter configuration.1.Select to receive a business object as a request from the Oracle CX Sales and B2B Service.This selection invokes the integration.2.Select to receive an event subscription raised by the Oracle CX Sales and B2B Service application as a request from the Oracle CX Sales and B2B Service.This selection invokes the integration.Note: If business events are not displayed for selection, ensure that you configured your URL correctly on the Connections page.For connections created before the 18 February 2020 release of the simplified connections page, you must explicitly specify the Events Catalog URL.For connections created on or after the 18 February 2020 release of the simplified connections page, you must specify only the Oracle CX Sales and B2B Service host name.See Configure Connection Properties .Element Description Configure a Request Select the request type appropriate to your integration.The fields that are displayed below are based on the request type that you select.With Business Objects : Select to display a list of business objects.With Business Events : Select to display a list of event subscriptions Select a Business Object (is displayed if With Business Objects is selected)Select the business object from the Oracle CX Sales and B2B Service application to receive as a request that starts the integration. |
3-1Select the specific type to receive as a request from the Oracle CX Sales and B2B Service.Your ability to select either a business object or event subscription is based on the content of the WSDL file (for business objects) or event catalog URL (for event subscriptions) you specified during Oracle CX Sales and B2B Service Adapter configuration.1.Select to receive a business object as a request from the Oracle CX Sales and B2B Service.This selection invokes the integration.2.Select to receive an event subscription raised by the Oracle CX Sales and B2B Service application as a request from the Oracle CX Sales and B2B Service.This selection invokes the integration.Note: If business events are not displayed for selection, ensure that you configured your URL correctly on the Connections page.For connections created before the 18 February 2020 release of the simplified connections page, you must explicitly specify the Events Catalog URL.For connections created on or after the 18 February 2020 release of the simplified connections page, you must specify only the Oracle CX Sales and B2B Service host name.See Configure Connection Properties .Element Description Configure a Request Select the request type appropriate to your integration.The fields that are displayed below are based on the request type that you select.With Business Objects : Select to display a list of business objects.With Business Events : Select to display a list of event subscriptions Select a Business Object (is displayed if With Business Objects is selected)Select the business object from the Oracle CX Sales and B2B Service application to receive as a request that starts the integration.Business Event For Subscription (is displayed if With Business Events is selected)Select the event subscription from the Oracle CX Sales and B2B Service application to which to subscribe. |
Your ability to select either a business object or event subscription is based on the content of the WSDL file (for business objects) or event catalog URL (for event subscriptions) you specified during Oracle CX Sales and B2B Service Adapter configuration.1.Select to receive a business object as a request from the Oracle CX Sales and B2B Service.This selection invokes the integration.2.Select to receive an event subscription raised by the Oracle CX Sales and B2B Service application as a request from the Oracle CX Sales and B2B Service.This selection invokes the integration.Note: If business events are not displayed for selection, ensure that you configured your URL correctly on the Connections page.For connections created before the 18 February 2020 release of the simplified connections page, you must explicitly specify the Events Catalog URL.For connections created on or after the 18 February 2020 release of the simplified connections page, you must specify only the Oracle CX Sales and B2B Service host name.See Configure Connection Properties .Element Description Configure a Request Select the request type appropriate to your integration.The fields that are displayed below are based on the request type that you select.With Business Objects : Select to display a list of business objects.With Business Events : Select to display a list of event subscriptions Select a Business Object (is displayed if With Business Objects is selected)Select the business object from the Oracle CX Sales and B2B Service application to receive as a request that starts the integration.Business Event For Subscription (is displayed if With Business Events is selected)Select the event subscription from the Oracle CX Sales and B2B Service application to which to subscribe.This event is received as a request that starts the integration. |
1.Select to receive a business object as a request from the Oracle CX Sales and B2B Service.This selection invokes the integration.2.Select to receive an event subscription raised by the Oracle CX Sales and B2B Service application as a request from the Oracle CX Sales and B2B Service.This selection invokes the integration.Note: If business events are not displayed for selection, ensure that you configured your URL correctly on the Connections page.For connections created before the 18 February 2020 release of the simplified connections page, you must explicitly specify the Events Catalog URL.For connections created on or after the 18 February 2020 release of the simplified connections page, you must specify only the Oracle CX Sales and B2B Service host name.See Configure Connection Properties .Element Description Configure a Request Select the request type appropriate to your integration.The fields that are displayed below are based on the request type that you select.With Business Objects : Select to display a list of business objects.With Business Events : Select to display a list of event subscriptions Select a Business Object (is displayed if With Business Objects is selected)Select the business object from the Oracle CX Sales and B2B Service application to receive as a request that starts the integration.Business Event For Subscription (is displayed if With Business Events is selected)Select the event subscription from the Oracle CX Sales and B2B Service application to which to subscribe.This event is received as a request that starts the integration.Only events that can be subscribed to are displayed Any custom business events that you created and published in the the Application Composer application are also available for selection. |
This selection invokes the integration.2.Select to receive an event subscription raised by the Oracle CX Sales and B2B Service application as a request from the Oracle CX Sales and B2B Service.This selection invokes the integration.Note: If business events are not displayed for selection, ensure that you configured your URL correctly on the Connections page.For connections created before the 18 February 2020 release of the simplified connections page, you must explicitly specify the Events Catalog URL.For connections created on or after the 18 February 2020 release of the simplified connections page, you must specify only the Oracle CX Sales and B2B Service host name.See Configure Connection Properties .Element Description Configure a Request Select the request type appropriate to your integration.The fields that are displayed below are based on the request type that you select.With Business Objects : Select to display a list of business objects.With Business Events : Select to display a list of event subscriptions Select a Business Object (is displayed if With Business Objects is selected)Select the business object from the Oracle CX Sales and B2B Service application to receive as a request that starts the integration.Business Event For Subscription (is displayed if With Business Events is selected)Select the event subscription from the Oracle CX Sales and B2B Service application to which to subscribe.This event is received as a request that starts the integration.Only events that can be subscribed to are displayed Any custom business events that you created and published in the the Application Composer application are also available for selection.Custom events are identifiable by their description.Chapter 3 Trigger Request Page 3-2Element Description Filter Expr for Business_Event_Name (is displayed if With Business Events is selected)Enter an event condition filter expression. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.