Split (1)

train · 94.6k rows

text stringlengths 65 20k
(See Immediate (Synchronous) Response is Required for instructions.)Delayed (asynchronous) response: A callback service to which to route the callback is exposed.You select Delayed as the response type on the Response page and select the operation and business object that comprise a successful callback response, a failed callback response, or both.(See Response Type Delayed (Asynchronous) Response is Required for instructions.)No response is required: You select None on the Response page because a response is not required.(See Response Type None for instructions.)The following table describes the fields available if an immediate (synchronous) response is required.Table 3-1 Response Type Immediate (Synchronous) Response is Required Element Description Response Type Select Immediate for the Oracle ERP Cloud application to wait until a response is received from the integration.This is also known as the request and response message exchange pattern.This is the default selection.Filter by object name Enter the initial letters to filter the display of business objects.Chapter 3 Trigger Response Page 3-4Table 3-1 (Cont.)Response Type Immediate (Synchronous) Response is Required Element Description Select a Business Object Select the business object to receive from the Oracle ERP Cloud application as a response.A description of the selected business object is displayed below this list.Name Displays the name of the selected business object.Description Displays the description of the selected business object.
Delayed (asynchronous) response: A callback service to which to route the callback is exposed.You select Delayed as the response type on the Response page and select the operation and business object that comprise a successful callback response, a failed callback response, or both.(See Response Type Delayed (Asynchronous) Response is Required for instructions.)No response is required: You select None on the Response page because a response is not required.(See Response Type None for instructions.)The following table describes the fields available if an immediate (synchronous) response is required.Table 3-1 Response Type Immediate (Synchronous) Response is Required Element Description Response Type Select Immediate for the Oracle ERP Cloud application to wait until a response is received from the integration.This is also known as the request and response message exchange pattern.This is the default selection.Filter by object name Enter the initial letters to filter the display of business objects.Chapter 3 Trigger Response Page 3-4Table 3-1 (Cont.)Response Type Immediate (Synchronous) Response is Required Element Description Select a Business Object Select the business object to receive from the Oracle ERP Cloud application as a response.A description of the selected business object is displayed below this list.Name Displays the name of the selected business object.Description Displays the description of the selected business object.The following table describes the fields available if a delayed (asynchronous) callback response is required.
You select Delayed as the response type on the Response page and select the operation and business object that comprise a successful callback response, a failed callback response, or both.(See Response Type Delayed (Asynchronous) Response is Required for instructions.)No response is required: You select None on the Response page because a response is not required.(See Response Type None for instructions.)The following table describes the fields available if an immediate (synchronous) response is required.Table 3-1 Response Type Immediate (Synchronous) Response is Required Element Description Response Type Select Immediate for the Oracle ERP Cloud application to wait until a response is received from the integration.This is also known as the request and response message exchange pattern.This is the default selection.Filter by object name Enter the initial letters to filter the display of business objects.Chapter 3 Trigger Response Page 3-4Table 3-1 (Cont.)Response Type Immediate (Synchronous) Response is Required Element Description Select a Business Object Select the business object to receive from the Oracle ERP Cloud application as a response.A description of the selected business object is displayed below this list.Name Displays the name of the selected business object.Description Displays the description of the selected business object.The following table describes the fields available if a delayed (asynchronous) callback response is required.You can configure a successful callback response, a failed callback response, or both.
(See Response Type Delayed (Asynchronous) Response is Required for instructions.)No response is required: You select None on the Response page because a response is not required.(See Response Type None for instructions.)The following table describes the fields available if an immediate (synchronous) response is required.Table 3-1 Response Type Immediate (Synchronous) Response is Required Element Description Response Type Select Immediate for the Oracle ERP Cloud application to wait until a response is received from the integration.This is also known as the request and response message exchange pattern.This is the default selection.Filter by object name Enter the initial letters to filter the display of business objects.Chapter 3 Trigger Response Page 3-4Table 3-1 (Cont.)Response Type Immediate (Synchronous) Response is Required Element Description Select a Business Object Select the business object to receive from the Oracle ERP Cloud application as a response.A description of the selected business object is displayed below this list.Name Displays the name of the selected business object.Description Displays the description of the selected business object.The following table describes the fields available if a delayed (asynchronous) callback response is required.You can configure a successful callback response, a failed callback response, or both.Table 3-2 Response Type Delayed (Asynchronous) Response is Required Element Description Response Type Select Delayed to configure a successful callback response, a failed callback response, or both.
No response is required: You select None on the Response page because a response is not required.(See Response Type None for instructions.)The following table describes the fields available if an immediate (synchronous) response is required.Table 3-1 Response Type Immediate (Synchronous) Response is Required Element Description Response Type Select Immediate for the Oracle ERP Cloud application to wait until a response is received from the integration.This is also known as the request and response message exchange pattern.This is the default selection.Filter by object name Enter the initial letters to filter the display of business objects.Chapter 3 Trigger Response Page 3-4Table 3-1 (Cont.)Response Type Immediate (Synchronous) Response is Required Element Description Select a Business Object Select the business object to receive from the Oracle ERP Cloud application as a response.A description of the selected business object is displayed below this list.Name Displays the name of the selected business object.Description Displays the description of the selected business object.The following table describes the fields available if a delayed (asynchronous) callback response is required.You can configure a successful callback response, a failed callback response, or both.Table 3-2 Response Type Delayed (Asynchronous) Response is Required Element Description Response Type Select Delayed to configure a successful callback response, a failed callback response, or both.This enables you to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a successful callback response, failed callback response, or both.
(See Response Type None for instructions.)The following table describes the fields available if an immediate (synchronous) response is required.Table 3-1 Response Type Immediate (Synchronous) Response is Required Element Description Response Type Select Immediate for the Oracle ERP Cloud application to wait until a response is received from the integration.This is also known as the request and response message exchange pattern.This is the default selection.Filter by object name Enter the initial letters to filter the display of business objects.Chapter 3 Trigger Response Page 3-4Table 3-1 (Cont.)Response Type Immediate (Synchronous) Response is Required Element Description Select a Business Object Select the business object to receive from the Oracle ERP Cloud application as a response.A description of the selected business object is displayed below this list.Name Displays the name of the selected business object.Description Displays the description of the selected business object.The following table describes the fields available if a delayed (asynchronous) callback response is required.You can configure a successful callback response, a failed callback response, or both.Table 3-2 Response Type Delayed (Asynchronous) Response is Required Element Description Response Type Select Delayed to configure a successful callback response, a failed callback response, or both.This enables you to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a successful callback response, failed callback response, or both.Successful Response/Failed Response Select the type of callback to configure.
The following table describes the fields available if an immediate (synchronous) response is required.Table 3-1 Response Type Immediate (Synchronous) Response is Required Element Description Response Type Select Immediate for the Oracle ERP Cloud application to wait until a response is received from the integration.This is also known as the request and response message exchange pattern.This is the default selection.Filter by object name Enter the initial letters to filter the display of business objects.Chapter 3 Trigger Response Page 3-4Table 3-1 (Cont.)Response Type Immediate (Synchronous) Response is Required Element Description Select a Business Object Select the business object to receive from the Oracle ERP Cloud application as a response.A description of the selected business object is displayed below this list.Name Displays the name of the selected business object.Description Displays the description of the selected business object.The following table describes the fields available if a delayed (asynchronous) callback response is required.You can configure a successful callback response, a failed callback response, or both.Table 3-2 Response Type Delayed (Asynchronous) Response is Required Element Description Response Type Select Delayed to configure a successful callback response, a failed callback response, or both.This enables you to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a successful callback response, failed callback response, or both.Successful Response/Failed Response Select the type of callback to configure.After configuring one type of callback (for example, successful), you can configure the other type (for example, failed).
Table 3-1 Response Type Immediate (Synchronous) Response is Required Element Description Response Type Select Immediate for the Oracle ERP Cloud application to wait until a response is received from the integration.This is also known as the request and response message exchange pattern.This is the default selection.Filter by object name Enter the initial letters to filter the display of business objects.Chapter 3 Trigger Response Page 3-4Table 3-1 (Cont.)Response Type Immediate (Synchronous) Response is Required Element Description Select a Business Object Select the business object to receive from the Oracle ERP Cloud application as a response.A description of the selected business object is displayed below this list.Name Displays the name of the selected business object.Description Displays the description of the selected business object.The following table describes the fields available if a delayed (asynchronous) callback response is required.You can configure a successful callback response, a failed callback response, or both.Table 3-2 Response Type Delayed (Asynchronous) Response is Required Element Description Response Type Select Delayed to configure a successful callback response, a failed callback response, or both.This enables you to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a successful callback response, failed callback response, or both.Successful Response/Failed Response Select the type of callback to configure.After configuring one type of callback (for example, successful), you can configure the other type (for example, failed).Successful Response : Select to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a successful callback response sent by the integration.
This is also known as the request and response message exchange pattern.This is the default selection.Filter by object name Enter the initial letters to filter the display of business objects.Chapter 3 Trigger Response Page 3-4Table 3-1 (Cont.)Response Type Immediate (Synchronous) Response is Required Element Description Select a Business Object Select the business object to receive from the Oracle ERP Cloud application as a response.A description of the selected business object is displayed below this list.Name Displays the name of the selected business object.Description Displays the description of the selected business object.The following table describes the fields available if a delayed (asynchronous) callback response is required.You can configure a successful callback response, a failed callback response, or both.Table 3-2 Response Type Delayed (Asynchronous) Response is Required Element Description Response Type Select Delayed to configure a successful callback response, a failed callback response, or both.This enables you to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a successful callback response, failed callback response, or both.Successful Response/Failed Response Select the type of callback to configure.After configuring one type of callback (for example, successful), you can configure the other type (for example, failed).Successful Response : Select to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a successful callback response sent by the integration.Failed Response : Select to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a failed callback response sent by the integration.
This is the default selection.Filter by object name Enter the initial letters to filter the display of business objects.Chapter 3 Trigger Response Page 3-4Table 3-1 (Cont.)Response Type Immediate (Synchronous) Response is Required Element Description Select a Business Object Select the business object to receive from the Oracle ERP Cloud application as a response.A description of the selected business object is displayed below this list.Name Displays the name of the selected business object.Description Displays the description of the selected business object.The following table describes the fields available if a delayed (asynchronous) callback response is required.You can configure a successful callback response, a failed callback response, or both.Table 3-2 Response Type Delayed (Asynchronous) Response is Required Element Description Response Type Select Delayed to configure a successful callback response, a failed callback response, or both.This enables you to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a successful callback response, failed callback response, or both.Successful Response/Failed Response Select the type of callback to configure.After configuring one type of callback (for example, successful), you can configure the other type (for example, failed).Successful Response : Select to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a successful callback response sent by the integration.Failed Response : Select to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a failed callback response sent by the integration.Select the operation to perform on the business objectSelect the operation to perform on the business object.
Filter by object name Enter the initial letters to filter the display of business objects.Chapter 3 Trigger Response Page 3-4Table 3-1 (Cont.)Response Type Immediate (Synchronous) Response is Required Element Description Select a Business Object Select the business object to receive from the Oracle ERP Cloud application as a response.A description of the selected business object is displayed below this list.Name Displays the name of the selected business object.Description Displays the description of the selected business object.The following table describes the fields available if a delayed (asynchronous) callback response is required.You can configure a successful callback response, a failed callback response, or both.Table 3-2 Response Type Delayed (Asynchronous) Response is Required Element Description Response Type Select Delayed to configure a successful callback response, a failed callback response, or both.This enables you to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a successful callback response, failed callback response, or both.Successful Response/Failed Response Select the type of callback to configure.After configuring one type of callback (for example, successful), you can configure the other type (for example, failed).Successful Response : Select to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a successful callback response sent by the integration.Failed Response : Select to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a failed callback response sent by the integration.Select the operation to perform on the business objectSelect the operation to perform on the business object.Life Cycle Displays the current state of the selected business document.
Response Type Immediate (Synchronous) Response is Required Element Description Select a Business Object Select the business object to receive from the Oracle ERP Cloud application as a response.A description of the selected business object is displayed below this list.Name Displays the name of the selected business object.Description Displays the description of the selected business object.The following table describes the fields available if a delayed (asynchronous) callback response is required.You can configure a successful callback response, a failed callback response, or both.Table 3-2 Response Type Delayed (Asynchronous) Response is Required Element Description Response Type Select Delayed to configure a successful callback response, a failed callback response, or both.This enables you to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a successful callback response, failed callback response, or both.Successful Response/Failed Response Select the type of callback to configure.After configuring one type of callback (for example, successful), you can configure the other type (for example, failed).Successful Response : Select to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a successful callback response sent by the integration.Failed Response : Select to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a failed callback response sent by the integration.Select the operation to perform on the business objectSelect the operation to perform on the business object.Life Cycle Displays the current state of the selected business document.Active indicates the business document is available for use.
A description of the selected business object is displayed below this list.Name Displays the name of the selected business object.Description Displays the description of the selected business object.The following table describes the fields available if a delayed (asynchronous) callback response is required.You can configure a successful callback response, a failed callback response, or both.Table 3-2 Response Type Delayed (Asynchronous) Response is Required Element Description Response Type Select Delayed to configure a successful callback response, a failed callback response, or both.This enables you to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a successful callback response, failed callback response, or both.Successful Response/Failed Response Select the type of callback to configure.After configuring one type of callback (for example, successful), you can configure the other type (for example, failed).Successful Response : Select to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a successful callback response sent by the integration.Failed Response : Select to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a failed callback response sent by the integration.Select the operation to perform on the business objectSelect the operation to perform on the business object.Life Cycle Displays the current state of the selected business document.Active indicates the business document is available for use.Deprecated indicates the business document is nearing the end of use and must be used with caution.
Name Displays the name of the selected business object.Description Displays the description of the selected business object.The following table describes the fields available if a delayed (asynchronous) callback response is required.You can configure a successful callback response, a failed callback response, or both.Table 3-2 Response Type Delayed (Asynchronous) Response is Required Element Description Response Type Select Delayed to configure a successful callback response, a failed callback response, or both.This enables you to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a successful callback response, failed callback response, or both.Successful Response/Failed Response Select the type of callback to configure.After configuring one type of callback (for example, successful), you can configure the other type (for example, failed).Successful Response : Select to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a successful callback response sent by the integration.Failed Response : Select to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a failed callback response sent by the integration.Select the operation to perform on the business objectSelect the operation to perform on the business object.Life Cycle Displays the current state of the selected business document.Active indicates the business document is available for use.Deprecated indicates the business document is nearing the end of use and must be used with caution.Name Displays the name of the selected business object.
Description Displays the description of the selected business object.The following table describes the fields available if a delayed (asynchronous) callback response is required.You can configure a successful callback response, a failed callback response, or both.Table 3-2 Response Type Delayed (Asynchronous) Response is Required Element Description Response Type Select Delayed to configure a successful callback response, a failed callback response, or both.This enables you to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a successful callback response, failed callback response, or both.Successful Response/Failed Response Select the type of callback to configure.After configuring one type of callback (for example, successful), you can configure the other type (for example, failed).Successful Response : Select to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a successful callback response sent by the integration.Failed Response : Select to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a failed callback response sent by the integration.Select the operation to perform on the business objectSelect the operation to perform on the business object.Life Cycle Displays the current state of the selected business document.Active indicates the business document is available for use.Deprecated indicates the business document is nearing the end of use and must be used with caution.Name Displays the name of the selected business object.Description Displays the description of the selected business object.
The following table describes the fields available if a delayed (asynchronous) callback response is required.You can configure a successful callback response, a failed callback response, or both.Table 3-2 Response Type Delayed (Asynchronous) Response is Required Element Description Response Type Select Delayed to configure a successful callback response, a failed callback response, or both.This enables you to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a successful callback response, failed callback response, or both.Successful Response/Failed Response Select the type of callback to configure.After configuring one type of callback (for example, successful), you can configure the other type (for example, failed).Successful Response : Select to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a successful callback response sent by the integration.Failed Response : Select to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a failed callback response sent by the integration.Select the operation to perform on the business objectSelect the operation to perform on the business object.Life Cycle Displays the current state of the selected business document.Active indicates the business document is available for use.Deprecated indicates the business document is nearing the end of use and must be used with caution.Name Displays the name of the selected business object.Description Displays the description of the selected business object.The following table describes the fields available if no response is required.Chapter 3 Trigger Response Page 3-5Table 3-3 Response Type None Element Description Response Type Select None.
You can configure a successful callback response, a failed callback response, or both.Table 3-2 Response Type Delayed (Asynchronous) Response is Required Element Description Response Type Select Delayed to configure a successful callback response, a failed callback response, or both.This enables you to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a successful callback response, failed callback response, or both.Successful Response/Failed Response Select the type of callback to configure.After configuring one type of callback (for example, successful), you can configure the other type (for example, failed).Successful Response : Select to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a successful callback response sent by the integration.Failed Response : Select to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a failed callback response sent by the integration.Select the operation to perform on the business objectSelect the operation to perform on the business object.Life Cycle Displays the current state of the selected business document.Active indicates the business document is available for use.Deprecated indicates the business document is nearing the end of use and must be used with caution.Name Displays the name of the selected business object.Description Displays the description of the selected business object.The following table describes the fields available if no response is required.Chapter 3 Trigger Response Page 3-5Table 3-3 Response Type None Element Description Response Type Select None.Select a Business Object If you select None, this section is hidden.
Table 3-2 Response Type Delayed (Asynchronous) Response is Required Element Description Response Type Select Delayed to configure a successful callback response, a failed callback response, or both.This enables you to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a successful callback response, failed callback response, or both.Successful Response/Failed Response Select the type of callback to configure.After configuring one type of callback (for example, successful), you can configure the other type (for example, failed).Successful Response : Select to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a successful callback response sent by the integration.Failed Response : Select to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a failed callback response sent by the integration.Select the operation to perform on the business objectSelect the operation to perform on the business object.Life Cycle Displays the current state of the selected business document.Active indicates the business document is available for use.Deprecated indicates the business document is nearing the end of use and must be used with caution.Name Displays the name of the selected business object.Description Displays the description of the selected business object.The following table describes the fields available if no response is required.Chapter 3 Trigger Response Page 3-5Table 3-3 Response Type None Element Description Response Type Select None.Select a Business Object If you select None, this section is hidden.Invoke Actions Page Select the Oracle ERP Cloud invoke option for your integration.
This enables you to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a successful callback response, failed callback response, or both.Successful Response/Failed Response Select the type of callback to configure.After configuring one type of callback (for example, successful), you can configure the other type (for example, failed).Successful Response : Select to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a successful callback response sent by the integration.Failed Response : Select to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a failed callback response sent by the integration.Select the operation to perform on the business objectSelect the operation to perform on the business object.Life Cycle Displays the current state of the selected business document.Active indicates the business document is available for use.Deprecated indicates the business document is nearing the end of use and must be used with caution.Name Displays the name of the selected business object.Description Displays the description of the selected business object.The following table describes the fields available if no response is required.Chapter 3 Trigger Response Page 3-5Table 3-3 Response Type None Element Description Response Type Select None.Select a Business Object If you select None, this section is hidden.Invoke Actions Page Select the Oracle ERP Cloud invoke option for your integration.These options are only displayed when you are configuring the Oracle ERP Cloud Adapter as an invoke connection in an integration.
Successful Response/Failed Response Select the type of callback to configure.After configuring one type of callback (for example, successful), you can configure the other type (for example, failed).Successful Response : Select to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a successful callback response sent by the integration.Failed Response : Select to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a failed callback response sent by the integration.Select the operation to perform on the business objectSelect the operation to perform on the business object.Life Cycle Displays the current state of the selected business document.Active indicates the business document is available for use.Deprecated indicates the business document is nearing the end of use and must be used with caution.Name Displays the name of the selected business object.Description Displays the description of the selected business object.The following table describes the fields available if no response is required.Chapter 3 Trigger Response Page 3-5Table 3-3 Response Type None Element Description Response Type Select None.Select a Business Object If you select None, this section is hidden.Invoke Actions Page Select the Oracle ERP Cloud invoke option for your integration.These options are only displayed when you are configuring the Oracle ERP Cloud Adapter as an invoke connection in an integration.Element Description What would you like to do with the Oracle ERP Cloud AdapterQuery, Create, Update, or Delete Information : Provides the standard configuration path for selecting a business object or service.
After configuring one type of callback (for example, successful), you can configure the other type (for example, failed).Successful Response : Select to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a successful callback response sent by the integration.Failed Response : Select to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a failed callback response sent by the integration.Select the operation to perform on the business objectSelect the operation to perform on the business object.Life Cycle Displays the current state of the selected business document.Active indicates the business document is available for use.Deprecated indicates the business document is nearing the end of use and must be used with caution.Name Displays the name of the selected business object.Description Displays the description of the selected business object.The following table describes the fields available if no response is required.Chapter 3 Trigger Response Page 3-5Table 3-3 Response Type None Element Description Response Type Select None.Select a Business Object If you select None, this section is hidden.Invoke Actions Page Select the Oracle ERP Cloud invoke option for your integration.These options are only displayed when you are configuring the Oracle ERP Cloud Adapter as an invoke connection in an integration.Element Description What would you like to do with the Oracle ERP Cloud AdapterQuery, Create, Update, or Delete Information : Provides the standard configuration path for selecting a business object or service.This option displays the standard Operations and Response pages.
Successful Response : Select to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a successful callback response sent by the integration.Failed Response : Select to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a failed callback response sent by the integration.Select the operation to perform on the business objectSelect the operation to perform on the business object.Life Cycle Displays the current state of the selected business document.Active indicates the business document is available for use.Deprecated indicates the business document is nearing the end of use and must be used with caution.Name Displays the name of the selected business object.Description Displays the description of the selected business object.The following table describes the fields available if no response is required.Chapter 3 Trigger Response Page 3-5Table 3-3 Response Type None Element Description Response Type Select None.Select a Business Object If you select None, this section is hidden.Invoke Actions Page Select the Oracle ERP Cloud invoke option for your integration.These options are only displayed when you are configuring the Oracle ERP Cloud Adapter as an invoke connection in an integration.Element Description What would you like to do with the Oracle ERP Cloud AdapterQuery, Create, Update, or Delete Information : Provides the standard configuration path for selecting a business object or service.This option displays the standard Operations and Response pages.This is the default selection.
Failed Response : Select to configure the operation and business objects that you want the Oracle ERP Cloud application to process as part of a failed callback response sent by the integration.Select the operation to perform on the business objectSelect the operation to perform on the business object.Life Cycle Displays the current state of the selected business document.Active indicates the business document is available for use.Deprecated indicates the business document is nearing the end of use and must be used with caution.Name Displays the name of the selected business object.Description Displays the description of the selected business object.The following table describes the fields available if no response is required.Chapter 3 Trigger Response Page 3-5Table 3-3 Response Type None Element Description Response Type Select None.Select a Business Object If you select None, this section is hidden.Invoke Actions Page Select the Oracle ERP Cloud invoke option for your integration.These options are only displayed when you are configuring the Oracle ERP Cloud Adapter as an invoke connection in an integration.Element Description What would you like to do with the Oracle ERP Cloud AdapterQuery, Create, Update, or Delete Information : Provides the standard configuration path for selecting a business object or service.This option displays the standard Operations and Response pages.This is the default selection.Import Bulk Data into Oracle ERP Cloud : Provides a scenario for loading and orchestrating data from a secure FTP location to Oracle ERP Cloud.
Select the operation to perform on the business objectSelect the operation to perform on the business object.Life Cycle Displays the current state of the selected business document.Active indicates the business document is available for use.Deprecated indicates the business document is nearing the end of use and must be used with caution.Name Displays the name of the selected business object.Description Displays the description of the selected business object.The following table describes the fields available if no response is required.Chapter 3 Trigger Response Page 3-5Table 3-3 Response Type None Element Description Response Type Select None.Select a Business Object If you select None, this section is hidden.Invoke Actions Page Select the Oracle ERP Cloud invoke option for your integration.These options are only displayed when you are configuring the Oracle ERP Cloud Adapter as an invoke connection in an integration.Element Description What would you like to do with the Oracle ERP Cloud AdapterQuery, Create, Update, or Delete Information : Provides the standard configuration path for selecting a business object or service.This option displays the standard Operations and Response pages.This is the default selection.Import Bulk Data into Oracle ERP Cloud : Provides a scenario for loading and orchestrating data from a secure FTP location to Oracle ERP Cloud.Data is loaded into a selected product interface table and then imported into the related main product application tables.
Life Cycle Displays the current state of the selected business document.Active indicates the business document is available for use.Deprecated indicates the business document is nearing the end of use and must be used with caution.Name Displays the name of the selected business object.Description Displays the description of the selected business object.The following table describes the fields available if no response is required.Chapter 3 Trigger Response Page 3-5Table 3-3 Response Type None Element Description Response Type Select None.Select a Business Object If you select None, this section is hidden.Invoke Actions Page Select the Oracle ERP Cloud invoke option for your integration.These options are only displayed when you are configuring the Oracle ERP Cloud Adapter as an invoke connection in an integration.Element Description What would you like to do with the Oracle ERP Cloud AdapterQuery, Create, Update, or Delete Information : Provides the standard configuration path for selecting a business object or service.This option displays the standard Operations and Response pages.This is the default selection.Import Bulk Data into Oracle ERP Cloud : Provides a scenario for loading and orchestrating data from a secure FTP location to Oracle ERP Cloud.Data is loaded into a selected product interface table and then imported into the related main product application tables.A callback notification may also be configured to send when the data import completes.
Active indicates the business document is available for use.Deprecated indicates the business document is nearing the end of use and must be used with caution.Name Displays the name of the selected business object.Description Displays the description of the selected business object.The following table describes the fields available if no response is required.Chapter 3 Trigger Response Page 3-5Table 3-3 Response Type None Element Description Response Type Select None.Select a Business Object If you select None, this section is hidden.Invoke Actions Page Select the Oracle ERP Cloud invoke option for your integration.These options are only displayed when you are configuring the Oracle ERP Cloud Adapter as an invoke connection in an integration.Element Description What would you like to do with the Oracle ERP Cloud AdapterQuery, Create, Update, or Delete Information : Provides the standard configuration path for selecting a business object or service.This option displays the standard Operations and Response pages.This is the default selection.Import Bulk Data into Oracle ERP Cloud : Provides a scenario for loading and orchestrating data from a secure FTP location to Oracle ERP Cloud.Data is loaded into a selected product interface table and then imported into the related main product application tables.A callback notification may also be configured to send when the data import completes.This option also shows a modified Operations page and a unique Response page in the Adapter Endpoint Configuration Wizard for importing data.
Deprecated indicates the business document is nearing the end of use and must be used with caution.Name Displays the name of the selected business object.Description Displays the description of the selected business object.The following table describes the fields available if no response is required.Chapter 3 Trigger Response Page 3-5Table 3-3 Response Type None Element Description Response Type Select None.Select a Business Object If you select None, this section is hidden.Invoke Actions Page Select the Oracle ERP Cloud invoke option for your integration.These options are only displayed when you are configuring the Oracle ERP Cloud Adapter as an invoke connection in an integration.Element Description What would you like to do with the Oracle ERP Cloud AdapterQuery, Create, Update, or Delete Information : Provides the standard configuration path for selecting a business object or service.This option displays the standard Operations and Response pages.This is the default selection.Import Bulk Data into Oracle ERP Cloud : Provides a scenario for loading and orchestrating data from a secure FTP location to Oracle ERP Cloud.Data is loaded into a selected product interface table and then imported into the related main product application tables.A callback notification may also be configured to send when the data import completes.This option also shows a modified Operations page and a unique Response page in the Adapter Endpoint Configuration Wizard for importing data.Send Files to ERP Cloud : Select to upload files to Oracle WebCenter Content (Universal Content Manager) in encrypted or unencrypted format.
Name Displays the name of the selected business object.Description Displays the description of the selected business object.The following table describes the fields available if no response is required.Chapter 3 Trigger Response Page 3-5Table 3-3 Response Type None Element Description Response Type Select None.Select a Business Object If you select None, this section is hidden.Invoke Actions Page Select the Oracle ERP Cloud invoke option for your integration.These options are only displayed when you are configuring the Oracle ERP Cloud Adapter as an invoke connection in an integration.Element Description What would you like to do with the Oracle ERP Cloud AdapterQuery, Create, Update, or Delete Information : Provides the standard configuration path for selecting a business object or service.This option displays the standard Operations and Response pages.This is the default selection.Import Bulk Data into Oracle ERP Cloud : Provides a scenario for loading and orchestrating data from a secure FTP location to Oracle ERP Cloud.Data is loaded into a selected product interface table and then imported into the related main product application tables.A callback notification may also be configured to send when the data import completes.This option also shows a modified Operations page and a unique Response page in the Adapter Endpoint Configuration Wizard for importing data.Send Files to ERP Cloud : Select to upload files to Oracle WebCenter Content (Universal Content Manager) in encrypted or unencrypted format.Invoke Operations Page Enter the Oracle ERP Cloud invoke operation values for your integration.
Description Displays the description of the selected business object.The following table describes the fields available if no response is required.Chapter 3 Trigger Response Page 3-5Table 3-3 Response Type None Element Description Response Type Select None.Select a Business Object If you select None, this section is hidden.Invoke Actions Page Select the Oracle ERP Cloud invoke option for your integration.These options are only displayed when you are configuring the Oracle ERP Cloud Adapter as an invoke connection in an integration.Element Description What would you like to do with the Oracle ERP Cloud AdapterQuery, Create, Update, or Delete Information : Provides the standard configuration path for selecting a business object or service.This option displays the standard Operations and Response pages.This is the default selection.Import Bulk Data into Oracle ERP Cloud : Provides a scenario for loading and orchestrating data from a secure FTP location to Oracle ERP Cloud.Data is loaded into a selected product interface table and then imported into the related main product application tables.A callback notification may also be configured to send when the data import completes.This option also shows a modified Operations page and a unique Response page in the Adapter Endpoint Configuration Wizard for importing data.Send Files to ERP Cloud : Select to upload files to Oracle WebCenter Content (Universal Content Manager) in encrypted or unencrypted format.Invoke Operations Page Enter the Oracle ERP Cloud invoke operation values for your integration.See the appropriate section based on your selection on the Actions page: Query, Create, Update, or Delete Information Import Bulk Data into Oracle ERP Cloud Send Files to ERP Cloud Query, Create, Update, or Delete Information If you selected Query, Create, Update, or Delete Information on the Actions page, select the business object or service and the operation to perform on the selected business object or service.Chapter 3 Invoke Actions Page 3-6Element Description Browse by Select to browse by business object or service.
The following table describes the fields available if no response is required.Chapter 3 Trigger Response Page 3-5Table 3-3 Response Type None Element Description Response Type Select None.Select a Business Object If you select None, this section is hidden.Invoke Actions Page Select the Oracle ERP Cloud invoke option for your integration.These options are only displayed when you are configuring the Oracle ERP Cloud Adapter as an invoke connection in an integration.Element Description What would you like to do with the Oracle ERP Cloud AdapterQuery, Create, Update, or Delete Information : Provides the standard configuration path for selecting a business object or service.This option displays the standard Operations and Response pages.This is the default selection.Import Bulk Data into Oracle ERP Cloud : Provides a scenario for loading and orchestrating data from a secure FTP location to Oracle ERP Cloud.Data is loaded into a selected product interface table and then imported into the related main product application tables.A callback notification may also be configured to send when the data import completes.This option also shows a modified Operations page and a unique Response page in the Adapter Endpoint Configuration Wizard for importing data.Send Files to ERP Cloud : Select to upload files to Oracle WebCenter Content (Universal Content Manager) in encrypted or unencrypted format.Invoke Operations Page Enter the Oracle ERP Cloud invoke operation values for your integration.See the appropriate section based on your selection on the Actions page: Query, Create, Update, or Delete Information Import Bulk Data into Oracle ERP Cloud Send Files to ERP Cloud Query, Create, Update, or Delete Information If you selected Query, Create, Update, or Delete Information on the Actions page, select the business object or service and the operation to perform on the selected business object or service.Chapter 3 Invoke Actions Page 3-6Element Description Browse by Select to browse by business object or service.There is a one-to-one correspondence between the business object and service.
Select a Business Object If you select None, this section is hidden.Invoke Actions Page Select the Oracle ERP Cloud invoke option for your integration.These options are only displayed when you are configuring the Oracle ERP Cloud Adapter as an invoke connection in an integration.Element Description What would you like to do with the Oracle ERP Cloud AdapterQuery, Create, Update, or Delete Information : Provides the standard configuration path for selecting a business object or service.This option displays the standard Operations and Response pages.This is the default selection.Import Bulk Data into Oracle ERP Cloud : Provides a scenario for loading and orchestrating data from a secure FTP location to Oracle ERP Cloud.Data is loaded into a selected product interface table and then imported into the related main product application tables.A callback notification may also be configured to send when the data import completes.This option also shows a modified Operations page and a unique Response page in the Adapter Endpoint Configuration Wizard for importing data.Send Files to ERP Cloud : Select to upload files to Oracle WebCenter Content (Universal Content Manager) in encrypted or unencrypted format.Invoke Operations Page Enter the Oracle ERP Cloud invoke operation values for your integration.See the appropriate section based on your selection on the Actions page: Query, Create, Update, or Delete Information Import Bulk Data into Oracle ERP Cloud Send Files to ERP Cloud Query, Create, Update, or Delete Information If you selected Query, Create, Update, or Delete Information on the Actions page, select the business object or service and the operation to perform on the selected business object or service.Chapter 3 Invoke Actions Page 3-6Element Description Browse by Select to browse by business object or service.There is a one-to-one correspondence between the business object and service.The service acts on the business document.
Invoke Actions Page Select the Oracle ERP Cloud invoke option for your integration.These options are only displayed when you are configuring the Oracle ERP Cloud Adapter as an invoke connection in an integration.Element Description What would you like to do with the Oracle ERP Cloud AdapterQuery, Create, Update, or Delete Information : Provides the standard configuration path for selecting a business object or service.This option displays the standard Operations and Response pages.This is the default selection.Import Bulk Data into Oracle ERP Cloud : Provides a scenario for loading and orchestrating data from a secure FTP location to Oracle ERP Cloud.Data is loaded into a selected product interface table and then imported into the related main product application tables.A callback notification may also be configured to send when the data import completes.This option also shows a modified Operations page and a unique Response page in the Adapter Endpoint Configuration Wizard for importing data.Send Files to ERP Cloud : Select to upload files to Oracle WebCenter Content (Universal Content Manager) in encrypted or unencrypted format.Invoke Operations Page Enter the Oracle ERP Cloud invoke operation values for your integration.See the appropriate section based on your selection on the Actions page: Query, Create, Update, or Delete Information Import Bulk Data into Oracle ERP Cloud Send Files to ERP Cloud Query, Create, Update, or Delete Information If you selected Query, Create, Update, or Delete Information on the Actions page, select the business object or service and the operation to perform on the selected business object or service.Chapter 3 Invoke Actions Page 3-6Element Description Browse by Select to browse by business object or service.There is a one-to-one correspondence between the business object and service.The service acts on the business document.Business Objects : Select to browse a list of available business objects.
These options are only displayed when you are configuring the Oracle ERP Cloud Adapter as an invoke connection in an integration.Element Description What would you like to do with the Oracle ERP Cloud AdapterQuery, Create, Update, or Delete Information : Provides the standard configuration path for selecting a business object or service.This option displays the standard Operations and Response pages.This is the default selection.Import Bulk Data into Oracle ERP Cloud : Provides a scenario for loading and orchestrating data from a secure FTP location to Oracle ERP Cloud.Data is loaded into a selected product interface table and then imported into the related main product application tables.A callback notification may also be configured to send when the data import completes.This option also shows a modified Operations page and a unique Response page in the Adapter Endpoint Configuration Wizard for importing data.Send Files to ERP Cloud : Select to upload files to Oracle WebCenter Content (Universal Content Manager) in encrypted or unencrypted format.Invoke Operations Page Enter the Oracle ERP Cloud invoke operation values for your integration.See the appropriate section based on your selection on the Actions page: Query, Create, Update, or Delete Information Import Bulk Data into Oracle ERP Cloud Send Files to ERP Cloud Query, Create, Update, or Delete Information If you selected Query, Create, Update, or Delete Information on the Actions page, select the business object or service and the operation to perform on the selected business object or service.Chapter 3 Invoke Actions Page 3-6Element Description Browse by Select to browse by business object or service.There is a one-to-one correspondence between the business object and service.The service acts on the business document.Business Objects : Select to browse a list of available business objects.Services: Select to browse a list of available services.
Element Description What would you like to do with the Oracle ERP Cloud AdapterQuery, Create, Update, or Delete Information : Provides the standard configuration path for selecting a business object or service.This option displays the standard Operations and Response pages.This is the default selection.Import Bulk Data into Oracle ERP Cloud : Provides a scenario for loading and orchestrating data from a secure FTP location to Oracle ERP Cloud.Data is loaded into a selected product interface table and then imported into the related main product application tables.A callback notification may also be configured to send when the data import completes.This option also shows a modified Operations page and a unique Response page in the Adapter Endpoint Configuration Wizard for importing data.Send Files to ERP Cloud : Select to upload files to Oracle WebCenter Content (Universal Content Manager) in encrypted or unencrypted format.Invoke Operations Page Enter the Oracle ERP Cloud invoke operation values for your integration.See the appropriate section based on your selection on the Actions page: Query, Create, Update, or Delete Information Import Bulk Data into Oracle ERP Cloud Send Files to ERP Cloud Query, Create, Update, or Delete Information If you selected Query, Create, Update, or Delete Information on the Actions page, select the business object or service and the operation to perform on the selected business object or service.Chapter 3 Invoke Actions Page 3-6Element Description Browse by Select to browse by business object or service.There is a one-to-one correspondence between the business object and service.The service acts on the business document.Business Objects : Select to browse a list of available business objects.Services: Select to browse a list of available services.Business (REST) Resource : Select to browse a list of available Oracle Fusion Applications REST API resources.
This option displays the standard Operations and Response pages.This is the default selection.Import Bulk Data into Oracle ERP Cloud : Provides a scenario for loading and orchestrating data from a secure FTP location to Oracle ERP Cloud.Data is loaded into a selected product interface table and then imported into the related main product application tables.A callback notification may also be configured to send when the data import completes.This option also shows a modified Operations page and a unique Response page in the Adapter Endpoint Configuration Wizard for importing data.Send Files to ERP Cloud : Select to upload files to Oracle WebCenter Content (Universal Content Manager) in encrypted or unencrypted format.Invoke Operations Page Enter the Oracle ERP Cloud invoke operation values for your integration.See the appropriate section based on your selection on the Actions page: Query, Create, Update, or Delete Information Import Bulk Data into Oracle ERP Cloud Send Files to ERP Cloud Query, Create, Update, or Delete Information If you selected Query, Create, Update, or Delete Information on the Actions page, select the business object or service and the operation to perform on the selected business object or service.Chapter 3 Invoke Actions Page 3-6Element Description Browse by Select to browse by business object or service.There is a one-to-one correspondence between the business object and service.The service acts on the business document.Business Objects : Select to browse a list of available business objects.Services: Select to browse a list of available services.Business (REST) Resource : Select to browse a list of available Oracle Fusion Applications REST API resources.This option is only available if you specified an interface catalog URL in the Interface Catalog URL field on the Connection Properties page when configuring the Oracle ERP Cloud Adapter.
This is the default selection.Import Bulk Data into Oracle ERP Cloud : Provides a scenario for loading and orchestrating data from a secure FTP location to Oracle ERP Cloud.Data is loaded into a selected product interface table and then imported into the related main product application tables.A callback notification may also be configured to send when the data import completes.This option also shows a modified Operations page and a unique Response page in the Adapter Endpoint Configuration Wizard for importing data.Send Files to ERP Cloud : Select to upload files to Oracle WebCenter Content (Universal Content Manager) in encrypted or unencrypted format.Invoke Operations Page Enter the Oracle ERP Cloud invoke operation values for your integration.See the appropriate section based on your selection on the Actions page: Query, Create, Update, or Delete Information Import Bulk Data into Oracle ERP Cloud Send Files to ERP Cloud Query, Create, Update, or Delete Information If you selected Query, Create, Update, or Delete Information on the Actions page, select the business object or service and the operation to perform on the selected business object or service.Chapter 3 Invoke Actions Page 3-6Element Description Browse by Select to browse by business object or service.There is a one-to-one correspondence between the business object and service.The service acts on the business document.Business Objects : Select to browse a list of available business objects.Services: Select to browse a list of available services.Business (REST) Resource : Select to browse a list of available Oracle Fusion Applications REST API resources.This option is only available if you specified an interface catalog URL in the Interface Catalog URL field on the Connection Properties page when configuring the Oracle ERP Cloud Adapter.Filter by object name (displayed if Business Objects is selected)Type the initial letters to filter the display of business objects or select a specific category: All Active Custom Deprecated Standard Select a Business Object (displayed if Business Objects is selected)Select the business object to use.
Import Bulk Data into Oracle ERP Cloud : Provides a scenario for loading and orchestrating data from a secure FTP location to Oracle ERP Cloud.Data is loaded into a selected product interface table and then imported into the related main product application tables.A callback notification may also be configured to send when the data import completes.This option also shows a modified Operations page and a unique Response page in the Adapter Endpoint Configuration Wizard for importing data.Send Files to ERP Cloud : Select to upload files to Oracle WebCenter Content (Universal Content Manager) in encrypted or unencrypted format.Invoke Operations Page Enter the Oracle ERP Cloud invoke operation values for your integration.See the appropriate section based on your selection on the Actions page: Query, Create, Update, or Delete Information Import Bulk Data into Oracle ERP Cloud Send Files to ERP Cloud Query, Create, Update, or Delete Information If you selected Query, Create, Update, or Delete Information on the Actions page, select the business object or service and the operation to perform on the selected business object or service.Chapter 3 Invoke Actions Page 3-6Element Description Browse by Select to browse by business object or service.There is a one-to-one correspondence between the business object and service.The service acts on the business document.Business Objects : Select to browse a list of available business objects.Services: Select to browse a list of available services.Business (REST) Resource : Select to browse a list of available Oracle Fusion Applications REST API resources.This option is only available if you specified an interface catalog URL in the Interface Catalog URL field on the Connection Properties page when configuring the Oracle ERP Cloud Adapter.Filter by object name (displayed if Business Objects is selected)Type the initial letters to filter the display of business objects or select a specific category: All Active Custom Deprecated Standard Select a Business Object (displayed if Business Objects is selected)Select the business object to use.Filter by service name (displayed if Services is selected)Type the initial letters to filter the display of services.
Data is loaded into a selected product interface table and then imported into the related main product application tables.A callback notification may also be configured to send when the data import completes.This option also shows a modified Operations page and a unique Response page in the Adapter Endpoint Configuration Wizard for importing data.Send Files to ERP Cloud : Select to upload files to Oracle WebCenter Content (Universal Content Manager) in encrypted or unencrypted format.Invoke Operations Page Enter the Oracle ERP Cloud invoke operation values for your integration.See the appropriate section based on your selection on the Actions page: Query, Create, Update, or Delete Information Import Bulk Data into Oracle ERP Cloud Send Files to ERP Cloud Query, Create, Update, or Delete Information If you selected Query, Create, Update, or Delete Information on the Actions page, select the business object or service and the operation to perform on the selected business object or service.Chapter 3 Invoke Actions Page 3-6Element Description Browse by Select to browse by business object or service.There is a one-to-one correspondence between the business object and service.The service acts on the business document.Business Objects : Select to browse a list of available business objects.Services: Select to browse a list of available services.Business (REST) Resource : Select to browse a list of available Oracle Fusion Applications REST API resources.This option is only available if you specified an interface catalog URL in the Interface Catalog URL field on the Connection Properties page when configuring the Oracle ERP Cloud Adapter.Filter by object name (displayed if Business Objects is selected)Type the initial letters to filter the display of business objects or select a specific category: All Active Custom Deprecated Standard Select a Business Object (displayed if Business Objects is selected)Select the business object to use.Filter by service name (displayed if Services is selected)Type the initial letters to filter the display of services.Select a Service (displayed if Services is selected)Select the service to use.
A callback notification may also be configured to send when the data import completes.This option also shows a modified Operations page and a unique Response page in the Adapter Endpoint Configuration Wizard for importing data.Send Files to ERP Cloud : Select to upload files to Oracle WebCenter Content (Universal Content Manager) in encrypted or unencrypted format.Invoke Operations Page Enter the Oracle ERP Cloud invoke operation values for your integration.See the appropriate section based on your selection on the Actions page: Query, Create, Update, or Delete Information Import Bulk Data into Oracle ERP Cloud Send Files to ERP Cloud Query, Create, Update, or Delete Information If you selected Query, Create, Update, or Delete Information on the Actions page, select the business object or service and the operation to perform on the selected business object or service.Chapter 3 Invoke Actions Page 3-6Element Description Browse by Select to browse by business object or service.There is a one-to-one correspondence between the business object and service.The service acts on the business document.Business Objects : Select to browse a list of available business objects.Services: Select to browse a list of available services.Business (REST) Resource : Select to browse a list of available Oracle Fusion Applications REST API resources.This option is only available if you specified an interface catalog URL in the Interface Catalog URL field on the Connection Properties page when configuring the Oracle ERP Cloud Adapter.Filter by object name (displayed if Business Objects is selected)Type the initial letters to filter the display of business objects or select a specific category: All Active Custom Deprecated Standard Select a Business Object (displayed if Business Objects is selected)Select the business object to use.Filter by service name (displayed if Services is selected)Type the initial letters to filter the display of services.Select a Service (displayed if Services is selected)Select the service to use.Select the Operation to Perform on the Business Object/Resource or Service (displayed if Services or Business Objects is selected)Select the operation to perform on the selected business object or service.
This option also shows a modified Operations page and a unique Response page in the Adapter Endpoint Configuration Wizard for importing data.Send Files to ERP Cloud : Select to upload files to Oracle WebCenter Content (Universal Content Manager) in encrypted or unencrypted format.Invoke Operations Page Enter the Oracle ERP Cloud invoke operation values for your integration.See the appropriate section based on your selection on the Actions page: Query, Create, Update, or Delete Information Import Bulk Data into Oracle ERP Cloud Send Files to ERP Cloud Query, Create, Update, or Delete Information If you selected Query, Create, Update, or Delete Information on the Actions page, select the business object or service and the operation to perform on the selected business object or service.Chapter 3 Invoke Actions Page 3-6Element Description Browse by Select to browse by business object or service.There is a one-to-one correspondence between the business object and service.The service acts on the business document.Business Objects : Select to browse a list of available business objects.Services: Select to browse a list of available services.Business (REST) Resource : Select to browse a list of available Oracle Fusion Applications REST API resources.This option is only available if you specified an interface catalog URL in the Interface Catalog URL field on the Connection Properties page when configuring the Oracle ERP Cloud Adapter.Filter by object name (displayed if Business Objects is selected)Type the initial letters to filter the display of business objects or select a specific category: All Active Custom Deprecated Standard Select a Business Object (displayed if Business Objects is selected)Select the business object to use.Filter by service name (displayed if Services is selected)Type the initial letters to filter the display of services.Select a Service (displayed if Services is selected)Select the service to use.Select the Operation to Perform on the Business Object/Resource or Service (displayed if Services or Business Objects is selected)Select the operation to perform on the selected business object or service.Select the operation to perform on the selected resource (displayed if Business (REST) Resource is selected)Select the operation to perform on the selected resource.
Send Files to ERP Cloud : Select to upload files to Oracle WebCenter Content (Universal Content Manager) in encrypted or unencrypted format.Invoke Operations Page Enter the Oracle ERP Cloud invoke operation values for your integration.See the appropriate section based on your selection on the Actions page: Query, Create, Update, or Delete Information Import Bulk Data into Oracle ERP Cloud Send Files to ERP Cloud Query, Create, Update, or Delete Information If you selected Query, Create, Update, or Delete Information on the Actions page, select the business object or service and the operation to perform on the selected business object or service.Chapter 3 Invoke Actions Page 3-6Element Description Browse by Select to browse by business object or service.There is a one-to-one correspondence between the business object and service.The service acts on the business document.Business Objects : Select to browse a list of available business objects.Services: Select to browse a list of available services.Business (REST) Resource : Select to browse a list of available Oracle Fusion Applications REST API resources.This option is only available if you specified an interface catalog URL in the Interface Catalog URL field on the Connection Properties page when configuring the Oracle ERP Cloud Adapter.Filter by object name (displayed if Business Objects is selected)Type the initial letters to filter the display of business objects or select a specific category: All Active Custom Deprecated Standard Select a Business Object (displayed if Business Objects is selected)Select the business object to use.Filter by service name (displayed if Services is selected)Type the initial letters to filter the display of services.Select a Service (displayed if Services is selected)Select the service to use.Select the Operation to Perform on the Business Object/Resource or Service (displayed if Services or Business Objects is selected)Select the operation to perform on the selected business object or service.Select the operation to perform on the selected resource (displayed if Business (REST) Resource is selected)Select the operation to perform on the selected resource.Note: If you select get, only the following query parameters are supported: expand fields onlyData Select a Service Application (displayed if Business (REST) Resources is selected)Select the service application to see the business resources defined in the application.
Invoke Operations Page Enter the Oracle ERP Cloud invoke operation values for your integration.See the appropriate section based on your selection on the Actions page: Query, Create, Update, or Delete Information Import Bulk Data into Oracle ERP Cloud Send Files to ERP Cloud Query, Create, Update, or Delete Information If you selected Query, Create, Update, or Delete Information on the Actions page, select the business object or service and the operation to perform on the selected business object or service.Chapter 3 Invoke Actions Page 3-6Element Description Browse by Select to browse by business object or service.There is a one-to-one correspondence between the business object and service.The service acts on the business document.Business Objects : Select to browse a list of available business objects.Services: Select to browse a list of available services.Business (REST) Resource : Select to browse a list of available Oracle Fusion Applications REST API resources.This option is only available if you specified an interface catalog URL in the Interface Catalog URL field on the Connection Properties page when configuring the Oracle ERP Cloud Adapter.Filter by object name (displayed if Business Objects is selected)Type the initial letters to filter the display of business objects or select a specific category: All Active Custom Deprecated Standard Select a Business Object (displayed if Business Objects is selected)Select the business object to use.Filter by service name (displayed if Services is selected)Type the initial letters to filter the display of services.Select a Service (displayed if Services is selected)Select the service to use.Select the Operation to Perform on the Business Object/Resource or Service (displayed if Services or Business Objects is selected)Select the operation to perform on the selected business object or service.Select the operation to perform on the selected resource (displayed if Business (REST) Resource is selected)Select the operation to perform on the selected resource.Note: If you select get, only the following query parameters are supported: expand fields onlyData Select a Service Application (displayed if Business (REST) Resources is selected)Select the service application to see the business resources defined in the application.Select a Business Resource (displayed if Business (REST) Resources is selected)Select the parent business resource to use.
See the appropriate section based on your selection on the Actions page: Query, Create, Update, or Delete Information Import Bulk Data into Oracle ERP Cloud Send Files to ERP Cloud Query, Create, Update, or Delete Information If you selected Query, Create, Update, or Delete Information on the Actions page, select the business object or service and the operation to perform on the selected business object or service.Chapter 3 Invoke Actions Page 3-6Element Description Browse by Select to browse by business object or service.There is a one-to-one correspondence between the business object and service.The service acts on the business document.Business Objects : Select to browse a list of available business objects.Services: Select to browse a list of available services.Business (REST) Resource : Select to browse a list of available Oracle Fusion Applications REST API resources.This option is only available if you specified an interface catalog URL in the Interface Catalog URL field on the Connection Properties page when configuring the Oracle ERP Cloud Adapter.Filter by object name (displayed if Business Objects is selected)Type the initial letters to filter the display of business objects or select a specific category: All Active Custom Deprecated Standard Select a Business Object (displayed if Business Objects is selected)Select the business object to use.Filter by service name (displayed if Services is selected)Type the initial letters to filter the display of services.Select a Service (displayed if Services is selected)Select the service to use.Select the Operation to Perform on the Business Object/Resource or Service (displayed if Services or Business Objects is selected)Select the operation to perform on the selected business object or service.Select the operation to perform on the selected resource (displayed if Business (REST) Resource is selected)Select the operation to perform on the selected resource.Note: If you select get, only the following query parameters are supported: expand fields onlyData Select a Service Application (displayed if Business (REST) Resources is selected)Select the service application to see the business resources defined in the application.Select a Business Resource (displayed if Business (REST) Resources is selected)Select the parent business resource to use.You can then click Browse and configure a child resource to select the corresponding child business resources of that parent to use.
There is a one-to-one correspondence between the business object and service.The service acts on the business document.Business Objects : Select to browse a list of available business objects.Services: Select to browse a list of available services.Business (REST) Resource : Select to browse a list of available Oracle Fusion Applications REST API resources.This option is only available if you specified an interface catalog URL in the Interface Catalog URL field on the Connection Properties page when configuring the Oracle ERP Cloud Adapter.Filter by object name (displayed if Business Objects is selected)Type the initial letters to filter the display of business objects or select a specific category: All Active Custom Deprecated Standard Select a Business Object (displayed if Business Objects is selected)Select the business object to use.Filter by service name (displayed if Services is selected)Type the initial letters to filter the display of services.Select a Service (displayed if Services is selected)Select the service to use.Select the Operation to Perform on the Business Object/Resource or Service (displayed if Services or Business Objects is selected)Select the operation to perform on the selected business object or service.Select the operation to perform on the selected resource (displayed if Business (REST) Resource is selected)Select the operation to perform on the selected resource.Note: If you select get, only the following query parameters are supported: expand fields onlyData Select a Service Application (displayed if Business (REST) Resources is selected)Select the service application to see the business resources defined in the application.Select a Business Resource (displayed if Business (REST) Resources is selected)Select the parent business resource to use.You can then click Browse and configure a child resource to select the corresponding child business resources of that parent to use.Note: Existing integrations created prior to the introduction of this feature can be edited to select parent business resources and their corresponding child business resources.Chapter 3 Invoke Operations Page 3-7Element Description Browse and configure a child response Click to access a page to select the following: The parent and child business resources of the selected parent business resource The operation to perform on the parent and child business resources After you click Ok, the link name changes to View and edit the configuration of a child resource .
The service acts on the business document.Business Objects : Select to browse a list of available business objects.Services: Select to browse a list of available services.Business (REST) Resource : Select to browse a list of available Oracle Fusion Applications REST API resources.This option is only available if you specified an interface catalog URL in the Interface Catalog URL field on the Connection Properties page when configuring the Oracle ERP Cloud Adapter.Filter by object name (displayed if Business Objects is selected)Type the initial letters to filter the display of business objects or select a specific category: All Active Custom Deprecated Standard Select a Business Object (displayed if Business Objects is selected)Select the business object to use.Filter by service name (displayed if Services is selected)Type the initial letters to filter the display of services.Select a Service (displayed if Services is selected)Select the service to use.Select the Operation to Perform on the Business Object/Resource or Service (displayed if Services or Business Objects is selected)Select the operation to perform on the selected business object or service.Select the operation to perform on the selected resource (displayed if Business (REST) Resource is selected)Select the operation to perform on the selected resource.Note: If you select get, only the following query parameters are supported: expand fields onlyData Select a Service Application (displayed if Business (REST) Resources is selected)Select the service application to see the business resources defined in the application.Select a Business Resource (displayed if Business (REST) Resources is selected)Select the parent business resource to use.You can then click Browse and configure a child resource to select the corresponding child business resources of that parent to use.Note: Existing integrations created prior to the introduction of this feature can be edited to select parent business resources and their corresponding child business resources.Chapter 3 Invoke Operations Page 3-7Element Description Browse and configure a child response Click to access a page to select the following: The parent and child business resources of the selected parent business resource The operation to perform on the parent and child business resources After you click Ok, the link name changes to View and edit the configuration of a child resource .Both the parent and child business resources are displayed on the Summary page.
Business Objects : Select to browse a list of available business objects.Services: Select to browse a list of available services.Business (REST) Resource : Select to browse a list of available Oracle Fusion Applications REST API resources.This option is only available if you specified an interface catalog URL in the Interface Catalog URL field on the Connection Properties page when configuring the Oracle ERP Cloud Adapter.Filter by object name (displayed if Business Objects is selected)Type the initial letters to filter the display of business objects or select a specific category: All Active Custom Deprecated Standard Select a Business Object (displayed if Business Objects is selected)Select the business object to use.Filter by service name (displayed if Services is selected)Type the initial letters to filter the display of services.Select a Service (displayed if Services is selected)Select the service to use.Select the Operation to Perform on the Business Object/Resource or Service (displayed if Services or Business Objects is selected)Select the operation to perform on the selected business object or service.Select the operation to perform on the selected resource (displayed if Business (REST) Resource is selected)Select the operation to perform on the selected resource.Note: If you select get, only the following query parameters are supported: expand fields onlyData Select a Service Application (displayed if Business (REST) Resources is selected)Select the service application to see the business resources defined in the application.Select a Business Resource (displayed if Business (REST) Resources is selected)Select the parent business resource to use.You can then click Browse and configure a child resource to select the corresponding child business resources of that parent to use.Note: Existing integrations created prior to the introduction of this feature can be edited to select parent business resources and their corresponding child business resources.Chapter 3 Invoke Operations Page 3-7Element Description Browse and configure a child response Click to access a page to select the following: The parent and child business resources of the selected parent business resource The operation to perform on the parent and child business resources After you click Ok, the link name changes to View and edit the configuration of a child resource .Both the parent and child business resources are displayed on the Summary page.To reset to your original selections, click this link, then click Reset.
Services: Select to browse a list of available services.Business (REST) Resource : Select to browse a list of available Oracle Fusion Applications REST API resources.This option is only available if you specified an interface catalog URL in the Interface Catalog URL field on the Connection Properties page when configuring the Oracle ERP Cloud Adapter.Filter by object name (displayed if Business Objects is selected)Type the initial letters to filter the display of business objects or select a specific category: All Active Custom Deprecated Standard Select a Business Object (displayed if Business Objects is selected)Select the business object to use.Filter by service name (displayed if Services is selected)Type the initial letters to filter the display of services.Select a Service (displayed if Services is selected)Select the service to use.Select the Operation to Perform on the Business Object/Resource or Service (displayed if Services or Business Objects is selected)Select the operation to perform on the selected business object or service.Select the operation to perform on the selected resource (displayed if Business (REST) Resource is selected)Select the operation to perform on the selected resource.Note: If you select get, only the following query parameters are supported: expand fields onlyData Select a Service Application (displayed if Business (REST) Resources is selected)Select the service application to see the business resources defined in the application.Select a Business Resource (displayed if Business (REST) Resources is selected)Select the parent business resource to use.You can then click Browse and configure a child resource to select the corresponding child business resources of that parent to use.Note: Existing integrations created prior to the introduction of this feature can be edited to select parent business resources and their corresponding child business resources.Chapter 3 Invoke Operations Page 3-7Element Description Browse and configure a child response Click to access a page to select the following: The parent and child business resources of the selected parent business resource The operation to perform on the parent and child business resources After you click Ok, the link name changes to View and edit the configuration of a child resource .Both the parent and child business resources are displayed on the Summary page.To reset to your original selections, click this link, then click Reset.Life Cycle Displays the state of the selected business object or service.
Business (REST) Resource : Select to browse a list of available Oracle Fusion Applications REST API resources.This option is only available if you specified an interface catalog URL in the Interface Catalog URL field on the Connection Properties page when configuring the Oracle ERP Cloud Adapter.Filter by object name (displayed if Business Objects is selected)Type the initial letters to filter the display of business objects or select a specific category: All Active Custom Deprecated Standard Select a Business Object (displayed if Business Objects is selected)Select the business object to use.Filter by service name (displayed if Services is selected)Type the initial letters to filter the display of services.Select a Service (displayed if Services is selected)Select the service to use.Select the Operation to Perform on the Business Object/Resource or Service (displayed if Services or Business Objects is selected)Select the operation to perform on the selected business object or service.Select the operation to perform on the selected resource (displayed if Business (REST) Resource is selected)Select the operation to perform on the selected resource.Note: If you select get, only the following query parameters are supported: expand fields onlyData Select a Service Application (displayed if Business (REST) Resources is selected)Select the service application to see the business resources defined in the application.Select a Business Resource (displayed if Business (REST) Resources is selected)Select the parent business resource to use.You can then click Browse and configure a child resource to select the corresponding child business resources of that parent to use.Note: Existing integrations created prior to the introduction of this feature can be edited to select parent business resources and their corresponding child business resources.Chapter 3 Invoke Operations Page 3-7Element Description Browse and configure a child response Click to access a page to select the following: The parent and child business resources of the selected parent business resource The operation to perform on the parent and child business resources After you click Ok, the link name changes to View and edit the configuration of a child resource .Both the parent and child business resources are displayed on the Summary page.To reset to your original selections, click this link, then click Reset.Life Cycle Displays the state of the selected business object or service.Deprecated indicates the business document is nearing the end of use and must be used with caution.
This option is only available if you specified an interface catalog URL in the Interface Catalog URL field on the Connection Properties page when configuring the Oracle ERP Cloud Adapter.Filter by object name (displayed if Business Objects is selected)Type the initial letters to filter the display of business objects or select a specific category: All Active Custom Deprecated Standard Select a Business Object (displayed if Business Objects is selected)Select the business object to use.Filter by service name (displayed if Services is selected)Type the initial letters to filter the display of services.Select a Service (displayed if Services is selected)Select the service to use.Select the Operation to Perform on the Business Object/Resource or Service (displayed if Services or Business Objects is selected)Select the operation to perform on the selected business object or service.Select the operation to perform on the selected resource (displayed if Business (REST) Resource is selected)Select the operation to perform on the selected resource.Note: If you select get, only the following query parameters are supported: expand fields onlyData Select a Service Application (displayed if Business (REST) Resources is selected)Select the service application to see the business resources defined in the application.Select a Business Resource (displayed if Business (REST) Resources is selected)Select the parent business resource to use.You can then click Browse and configure a child resource to select the corresponding child business resources of that parent to use.Note: Existing integrations created prior to the introduction of this feature can be edited to select parent business resources and their corresponding child business resources.Chapter 3 Invoke Operations Page 3-7Element Description Browse and configure a child response Click to access a page to select the following: The parent and child business resources of the selected parent business resource The operation to perform on the parent and child business resources After you click Ok, the link name changes to View and edit the configuration of a child resource .Both the parent and child business resources are displayed on the Summary page.To reset to your original selections, click this link, then click Reset.Life Cycle Displays the state of the selected business object or service.Deprecated indicates the business document is nearing the end of use and must be used with caution.Name Displays the name of the selected business object or service.
Filter by object name (displayed if Business Objects is selected)Type the initial letters to filter the display of business objects or select a specific category: All Active Custom Deprecated Standard Select a Business Object (displayed if Business Objects is selected)Select the business object to use.Filter by service name (displayed if Services is selected)Type the initial letters to filter the display of services.Select a Service (displayed if Services is selected)Select the service to use.Select the Operation to Perform on the Business Object/Resource or Service (displayed if Services or Business Objects is selected)Select the operation to perform on the selected business object or service.Select the operation to perform on the selected resource (displayed if Business (REST) Resource is selected)Select the operation to perform on the selected resource.Note: If you select get, only the following query parameters are supported: expand fields onlyData Select a Service Application (displayed if Business (REST) Resources is selected)Select the service application to see the business resources defined in the application.Select a Business Resource (displayed if Business (REST) Resources is selected)Select the parent business resource to use.You can then click Browse and configure a child resource to select the corresponding child business resources of that parent to use.Note: Existing integrations created prior to the introduction of this feature can be edited to select parent business resources and their corresponding child business resources.Chapter 3 Invoke Operations Page 3-7Element Description Browse and configure a child response Click to access a page to select the following: The parent and child business resources of the selected parent business resource The operation to perform on the parent and child business resources After you click Ok, the link name changes to View and edit the configuration of a child resource .Both the parent and child business resources are displayed on the Summary page.To reset to your original selections, click this link, then click Reset.Life Cycle Displays the state of the selected business object or service.Deprecated indicates the business document is nearing the end of use and must be used with caution.Name Displays the name of the selected business object or service.Description Displays the description of the selected business object or service.
Filter by service name (displayed if Services is selected)Type the initial letters to filter the display of services.Select a Service (displayed if Services is selected)Select the service to use.Select the Operation to Perform on the Business Object/Resource or Service (displayed if Services or Business Objects is selected)Select the operation to perform on the selected business object or service.Select the operation to perform on the selected resource (displayed if Business (REST) Resource is selected)Select the operation to perform on the selected resource.Note: If you select get, only the following query parameters are supported: expand fields onlyData Select a Service Application (displayed if Business (REST) Resources is selected)Select the service application to see the business resources defined in the application.Select a Business Resource (displayed if Business (REST) Resources is selected)Select the parent business resource to use.You can then click Browse and configure a child resource to select the corresponding child business resources of that parent to use.Note: Existing integrations created prior to the introduction of this feature can be edited to select parent business resources and their corresponding child business resources.Chapter 3 Invoke Operations Page 3-7Element Description Browse and configure a child response Click to access a page to select the following: The parent and child business resources of the selected parent business resource The operation to perform on the parent and child business resources After you click Ok, the link name changes to View and edit the configuration of a child resource .Both the parent and child business resources are displayed on the Summary page.To reset to your original selections, click this link, then click Reset.Life Cycle Displays the state of the selected business object or service.Deprecated indicates the business document is nearing the end of use and must be used with caution.Name Displays the name of the selected business object or service.Description Displays the description of the selected business object or service.Import Bulk Data into Oracle ERP Cloud If you selected Import Bulk Data into Oracle ERP Cloud on the Actions page, select the job name to import, the job property name, and the type of log data for Oracle ERP Cloud to extract.
Select a Service (displayed if Services is selected)Select the service to use.Select the Operation to Perform on the Business Object/Resource or Service (displayed if Services or Business Objects is selected)Select the operation to perform on the selected business object or service.Select the operation to perform on the selected resource (displayed if Business (REST) Resource is selected)Select the operation to perform on the selected resource.Note: If you select get, only the following query parameters are supported: expand fields onlyData Select a Service Application (displayed if Business (REST) Resources is selected)Select the service application to see the business resources defined in the application.Select a Business Resource (displayed if Business (REST) Resources is selected)Select the parent business resource to use.You can then click Browse and configure a child resource to select the corresponding child business resources of that parent to use.Note: Existing integrations created prior to the introduction of this feature can be edited to select parent business resources and their corresponding child business resources.Chapter 3 Invoke Operations Page 3-7Element Description Browse and configure a child response Click to access a page to select the following: The parent and child business resources of the selected parent business resource The operation to perform on the parent and child business resources After you click Ok, the link name changes to View and edit the configuration of a child resource .Both the parent and child business resources are displayed on the Summary page.To reset to your original selections, click this link, then click Reset.Life Cycle Displays the state of the selected business object or service.Deprecated indicates the business document is nearing the end of use and must be used with caution.Name Displays the name of the selected business object or service.Description Displays the description of the selected business object or service.Import Bulk Data into Oracle ERP Cloud If you selected Import Bulk Data into Oracle ERP Cloud on the Actions page, select the job name to import, the job property name, and the type of log data for Oracle ERP Cloud to extract.See External Data Integration Services for Oracle Cloud: Overview .Chapter 3 Invoke Operations Page 3-8Element Description Select Bulk Data Import Process Select the job name to import.
Select the Operation to Perform on the Business Object/Resource or Service (displayed if Services or Business Objects is selected)Select the operation to perform on the selected business object or service.Select the operation to perform on the selected resource (displayed if Business (REST) Resource is selected)Select the operation to perform on the selected resource.Note: If you select get, only the following query parameters are supported: expand fields onlyData Select a Service Application (displayed if Business (REST) Resources is selected)Select the service application to see the business resources defined in the application.Select a Business Resource (displayed if Business (REST) Resources is selected)Select the parent business resource to use.You can then click Browse and configure a child resource to select the corresponding child business resources of that parent to use.Note: Existing integrations created prior to the introduction of this feature can be edited to select parent business resources and their corresponding child business resources.Chapter 3 Invoke Operations Page 3-7Element Description Browse and configure a child response Click to access a page to select the following: The parent and child business resources of the selected parent business resource The operation to perform on the parent and child business resources After you click Ok, the link name changes to View and edit the configuration of a child resource .Both the parent and child business resources are displayed on the Summary page.To reset to your original selections, click this link, then click Reset.Life Cycle Displays the state of the selected business object or service.Deprecated indicates the business document is nearing the end of use and must be used with caution.Name Displays the name of the selected business object or service.Description Displays the description of the selected business object or service.Import Bulk Data into Oracle ERP Cloud If you selected Import Bulk Data into Oracle ERP Cloud on the Actions page, select the job name to import, the job property name, and the type of log data for Oracle ERP Cloud to extract.See External Data Integration Services for Oracle Cloud: Overview .Chapter 3 Invoke Operations Page 3-8Element Description Select Bulk Data Import Process Select the job name to import.Import jobs are the background jobs that run on Oracle ERP Cloud to perform data upload operations.
Select the operation to perform on the selected resource (displayed if Business (REST) Resource is selected)Select the operation to perform on the selected resource.Note: If you select get, only the following query parameters are supported: expand fields onlyData Select a Service Application (displayed if Business (REST) Resources is selected)Select the service application to see the business resources defined in the application.Select a Business Resource (displayed if Business (REST) Resources is selected)Select the parent business resource to use.You can then click Browse and configure a child resource to select the corresponding child business resources of that parent to use.Note: Existing integrations created prior to the introduction of this feature can be edited to select parent business resources and their corresponding child business resources.Chapter 3 Invoke Operations Page 3-7Element Description Browse and configure a child response Click to access a page to select the following: The parent and child business resources of the selected parent business resource The operation to perform on the parent and child business resources After you click Ok, the link name changes to View and edit the configuration of a child resource .Both the parent and child business resources are displayed on the Summary page.To reset to your original selections, click this link, then click Reset.Life Cycle Displays the state of the selected business object or service.Deprecated indicates the business document is nearing the end of use and must be used with caution.Name Displays the name of the selected business object or service.Description Displays the description of the selected business object or service.Import Bulk Data into Oracle ERP Cloud If you selected Import Bulk Data into Oracle ERP Cloud on the Actions page, select the job name to import, the job property name, and the type of log data for Oracle ERP Cloud to extract.See External Data Integration Services for Oracle Cloud: Overview .Chapter 3 Invoke Operations Page 3-8Element Description Select Bulk Data Import Process Select the job name to import.Import jobs are the background jobs that run on Oracle ERP Cloud to perform data upload operations.The job name you select is used to import data.
Note: If you select get, only the following query parameters are supported: expand fields onlyData Select a Service Application (displayed if Business (REST) Resources is selected)Select the service application to see the business resources defined in the application.Select a Business Resource (displayed if Business (REST) Resources is selected)Select the parent business resource to use.You can then click Browse and configure a child resource to select the corresponding child business resources of that parent to use.Note: Existing integrations created prior to the introduction of this feature can be edited to select parent business resources and their corresponding child business resources.Chapter 3 Invoke Operations Page 3-7Element Description Browse and configure a child response Click to access a page to select the following: The parent and child business resources of the selected parent business resource The operation to perform on the parent and child business resources After you click Ok, the link name changes to View and edit the configuration of a child resource .Both the parent and child business resources are displayed on the Summary page.To reset to your original selections, click this link, then click Reset.Life Cycle Displays the state of the selected business object or service.Deprecated indicates the business document is nearing the end of use and must be used with caution.Name Displays the name of the selected business object or service.Description Displays the description of the selected business object or service.Import Bulk Data into Oracle ERP Cloud If you selected Import Bulk Data into Oracle ERP Cloud on the Actions page, select the job name to import, the job property name, and the type of log data for Oracle ERP Cloud to extract.See External Data Integration Services for Oracle Cloud: Overview .Chapter 3 Invoke Operations Page 3-8Element Description Select Bulk Data Import Process Select the job name to import.Import jobs are the background jobs that run on Oracle ERP Cloud to perform data upload operations.The job name you select is used to import data.The list of import jobs is obtained by invoking ErpIcsIntegrationService in the service catalog service WSDL.
Select a Business Resource (displayed if Business (REST) Resources is selected)Select the parent business resource to use.You can then click Browse and configure a child resource to select the corresponding child business resources of that parent to use.Note: Existing integrations created prior to the introduction of this feature can be edited to select parent business resources and their corresponding child business resources.Chapter 3 Invoke Operations Page 3-7Element Description Browse and configure a child response Click to access a page to select the following: The parent and child business resources of the selected parent business resource The operation to perform on the parent and child business resources After you click Ok, the link name changes to View and edit the configuration of a child resource .Both the parent and child business resources are displayed on the Summary page.To reset to your original selections, click this link, then click Reset.Life Cycle Displays the state of the selected business object or service.Deprecated indicates the business document is nearing the end of use and must be used with caution.Name Displays the name of the selected business object or service.Description Displays the description of the selected business object or service.Import Bulk Data into Oracle ERP Cloud If you selected Import Bulk Data into Oracle ERP Cloud on the Actions page, select the job name to import, the job property name, and the type of log data for Oracle ERP Cloud to extract.See External Data Integration Services for Oracle Cloud: Overview .Chapter 3 Invoke Operations Page 3-8Element Description Select Bulk Data Import Process Select the job name to import.Import jobs are the background jobs that run on Oracle ERP Cloud to perform data upload operations.The job name you select is used to import data.The list of import jobs is obtained by invoking ErpIcsIntegrationService in the service catalog service WSDL.The following information is obtained with each job: Interface ID: The import job key.
You can then click Browse and configure a child resource to select the corresponding child business resources of that parent to use.Note: Existing integrations created prior to the introduction of this feature can be edited to select parent business resources and their corresponding child business resources.Chapter 3 Invoke Operations Page 3-7Element Description Browse and configure a child response Click to access a page to select the following: The parent and child business resources of the selected parent business resource The operation to perform on the parent and child business resources After you click Ok, the link name changes to View and edit the configuration of a child resource .Both the parent and child business resources are displayed on the Summary page.To reset to your original selections, click this link, then click Reset.Life Cycle Displays the state of the selected business object or service.Deprecated indicates the business document is nearing the end of use and must be used with caution.Name Displays the name of the selected business object or service.Description Displays the description of the selected business object or service.Import Bulk Data into Oracle ERP Cloud If you selected Import Bulk Data into Oracle ERP Cloud on the Actions page, select the job name to import, the job property name, and the type of log data for Oracle ERP Cloud to extract.See External Data Integration Services for Oracle Cloud: Overview .Chapter 3 Invoke Operations Page 3-8Element Description Select Bulk Data Import Process Select the job name to import.Import jobs are the background jobs that run on Oracle ERP Cloud to perform data upload operations.The job name you select is used to import data.The list of import jobs is obtained by invoking ErpIcsIntegrationService in the service catalog service WSDL.The following information is obtained with each job: Interface ID: The import job key.UCM account: The account with which to upload the file.
Note: Existing integrations created prior to the introduction of this feature can be edited to select parent business resources and their corresponding child business resources.Chapter 3 Invoke Operations Page 3-7Element Description Browse and configure a child response Click to access a page to select the following: The parent and child business resources of the selected parent business resource The operation to perform on the parent and child business resources After you click Ok, the link name changes to View and edit the configuration of a child resource .Both the parent and child business resources are displayed on the Summary page.To reset to your original selections, click this link, then click Reset.Life Cycle Displays the state of the selected business object or service.Deprecated indicates the business document is nearing the end of use and must be used with caution.Name Displays the name of the selected business object or service.Description Displays the description of the selected business object or service.Import Bulk Data into Oracle ERP Cloud If you selected Import Bulk Data into Oracle ERP Cloud on the Actions page, select the job name to import, the job property name, and the type of log data for Oracle ERP Cloud to extract.See External Data Integration Services for Oracle Cloud: Overview .Chapter 3 Invoke Operations Page 3-8Element Description Select Bulk Data Import Process Select the job name to import.Import jobs are the background jobs that run on Oracle ERP Cloud to perform data upload operations.The job name you select is used to import data.The list of import jobs is obtained by invoking ErpIcsIntegrationService in the service catalog service WSDL.The following information is obtained with each job: Interface ID: The import job key.UCM account: The account with which to upload the file.Import job name and package name: To be displayed in the user interface.
Both the parent and child business resources are displayed on the Summary page.To reset to your original selections, click this link, then click Reset.Life Cycle Displays the state of the selected business object or service.Deprecated indicates the business document is nearing the end of use and must be used with caution.Name Displays the name of the selected business object or service.Description Displays the description of the selected business object or service.Import Bulk Data into Oracle ERP Cloud If you selected Import Bulk Data into Oracle ERP Cloud on the Actions page, select the job name to import, the job property name, and the type of log data for Oracle ERP Cloud to extract.See External Data Integration Services for Oracle Cloud: Overview .Chapter 3 Invoke Operations Page 3-8Element Description Select Bulk Data Import Process Select the job name to import.Import jobs are the background jobs that run on Oracle ERP Cloud to perform data upload operations.The job name you select is used to import data.The list of import jobs is obtained by invoking ErpIcsIntegrationService in the service catalog service WSDL.The following information is obtained with each job: Interface ID: The import job key.UCM account: The account with which to upload the file.Import job name and package name: To be displayed in the user interface.Description: The bulk data import process description.
To reset to your original selections, click this link, then click Reset.Life Cycle Displays the state of the selected business object or service.Deprecated indicates the business document is nearing the end of use and must be used with caution.Name Displays the name of the selected business object or service.Description Displays the description of the selected business object or service.Import Bulk Data into Oracle ERP Cloud If you selected Import Bulk Data into Oracle ERP Cloud on the Actions page, select the job name to import, the job property name, and the type of log data for Oracle ERP Cloud to extract.See External Data Integration Services for Oracle Cloud: Overview .Chapter 3 Invoke Operations Page 3-8Element Description Select Bulk Data Import Process Select the job name to import.Import jobs are the background jobs that run on Oracle ERP Cloud to perform data upload operations.The job name you select is used to import data.The list of import jobs is obtained by invoking ErpIcsIntegrationService in the service catalog service WSDL.The following information is obtained with each job: Interface ID: The import job key.UCM account: The account with which to upload the file.Import job name and package name: To be displayed in the user interface.Description: The bulk data import process description.Note: If import jobs do not appear in the list, there may be several causes.
Life Cycle Displays the state of the selected business object or service.Deprecated indicates the business document is nearing the end of use and must be used with caution.Name Displays the name of the selected business object or service.Description Displays the description of the selected business object or service.Import Bulk Data into Oracle ERP Cloud If you selected Import Bulk Data into Oracle ERP Cloud on the Actions page, select the job name to import, the job property name, and the type of log data for Oracle ERP Cloud to extract.See External Data Integration Services for Oracle Cloud: Overview .Chapter 3 Invoke Operations Page 3-8Element Description Select Bulk Data Import Process Select the job name to import.Import jobs are the background jobs that run on Oracle ERP Cloud to perform data upload operations.The job name you select is used to import data.The list of import jobs is obtained by invoking ErpIcsIntegrationService in the service catalog service WSDL.The following information is obtained with each job: Interface ID: The import job key.UCM account: The account with which to upload the file.Import job name and package name: To be displayed in the user interface.Description: The bulk data import process description.Note: If import jobs do not appear in the list, there may be several causes.See Jobs Not Appearing in the Import Jobs List on the Operations Page .
Deprecated indicates the business document is nearing the end of use and must be used with caution.Name Displays the name of the selected business object or service.Description Displays the description of the selected business object or service.Import Bulk Data into Oracle ERP Cloud If you selected Import Bulk Data into Oracle ERP Cloud on the Actions page, select the job name to import, the job property name, and the type of log data for Oracle ERP Cloud to extract.See External Data Integration Services for Oracle Cloud: Overview .Chapter 3 Invoke Operations Page 3-8Element Description Select Bulk Data Import Process Select the job name to import.Import jobs are the background jobs that run on Oracle ERP Cloud to perform data upload operations.The job name you select is used to import data.The list of import jobs is obtained by invoking ErpIcsIntegrationService in the service catalog service WSDL.The following information is obtained with each job: Interface ID: The import job key.UCM account: The account with which to upload the file.Import job name and package name: To be displayed in the user interface.Description: The bulk data import process description.Note: If import jobs do not appear in the list, there may be several causes.See Jobs Not Appearing in the Import Jobs List on the Operations Page .Reuse job property file uploaded separately in respective UCM accountSelect this check box, then enter the job property file name (without an extension) that Oracle ERP Cloud can obtain from the respective UCM account.
Name Displays the name of the selected business object or service.Description Displays the description of the selected business object or service.Import Bulk Data into Oracle ERP Cloud If you selected Import Bulk Data into Oracle ERP Cloud on the Actions page, select the job name to import, the job property name, and the type of log data for Oracle ERP Cloud to extract.See External Data Integration Services for Oracle Cloud: Overview .Chapter 3 Invoke Operations Page 3-8Element Description Select Bulk Data Import Process Select the job name to import.Import jobs are the background jobs that run on Oracle ERP Cloud to perform data upload operations.The job name you select is used to import data.The list of import jobs is obtained by invoking ErpIcsIntegrationService in the service catalog service WSDL.The following information is obtained with each job: Interface ID: The import job key.UCM account: The account with which to upload the file.Import job name and package name: To be displayed in the user interface.Description: The bulk data import process description.Note: If import jobs do not appear in the list, there may be several causes.See Jobs Not Appearing in the Import Jobs List on the Operations Page .Reuse job property file uploaded separately in respective UCM accountSelect this check box, then enter the job property file name (without an extension) that Oracle ERP Cloud can obtain from the respective UCM account.Job Property File Enter the job property file name (without the extension) that Oracle ERP Cloud gets from the UCM account.
Description Displays the description of the selected business object or service.Import Bulk Data into Oracle ERP Cloud If you selected Import Bulk Data into Oracle ERP Cloud on the Actions page, select the job name to import, the job property name, and the type of log data for Oracle ERP Cloud to extract.See External Data Integration Services for Oracle Cloud: Overview .Chapter 3 Invoke Operations Page 3-8Element Description Select Bulk Data Import Process Select the job name to import.Import jobs are the background jobs that run on Oracle ERP Cloud to perform data upload operations.The job name you select is used to import data.The list of import jobs is obtained by invoking ErpIcsIntegrationService in the service catalog service WSDL.The following information is obtained with each job: Interface ID: The import job key.UCM account: The account with which to upload the file.Import job name and package name: To be displayed in the user interface.Description: The bulk data import process description.Note: If import jobs do not appear in the list, there may be several causes.See Jobs Not Appearing in the Import Jobs List on the Operations Page .Reuse job property file uploaded separately in respective UCM accountSelect this check box, then enter the job property file name (without an extension) that Oracle ERP Cloud can obtain from the respective UCM account.Job Property File Enter the job property file name (without the extension) that Oracle ERP Cloud gets from the UCM account.Extract File Select the type of log data for Oracle ERP Cloud to extract while processing the data file: All: All failed records with supporting load and import process files.
Import Bulk Data into Oracle ERP Cloud If you selected Import Bulk Data into Oracle ERP Cloud on the Actions page, select the job name to import, the job property name, and the type of log data for Oracle ERP Cloud to extract.See External Data Integration Services for Oracle Cloud: Overview .Chapter 3 Invoke Operations Page 3-8Element Description Select Bulk Data Import Process Select the job name to import.Import jobs are the background jobs that run on Oracle ERP Cloud to perform data upload operations.The job name you select is used to import data.The list of import jobs is obtained by invoking ErpIcsIntegrationService in the service catalog service WSDL.The following information is obtained with each job: Interface ID: The import job key.UCM account: The account with which to upload the file.Import job name and package name: To be displayed in the user interface.Description: The bulk data import process description.Note: If import jobs do not appear in the list, there may be several causes.See Jobs Not Appearing in the Import Jobs List on the Operations Page .Reuse job property file uploaded separately in respective UCM accountSelect this check box, then enter the job property file name (without an extension) that Oracle ERP Cloud can obtain from the respective UCM account.Job Property File Enter the job property file name (without the extension) that Oracle ERP Cloud gets from the UCM account.Extract File Select the type of log data for Oracle ERP Cloud to extract while processing the data file: All: All failed records with supporting load and import process files.Error: Records that failed to load and import.
See External Data Integration Services for Oracle Cloud: Overview .Chapter 3 Invoke Operations Page 3-8Element Description Select Bulk Data Import Process Select the job name to import.Import jobs are the background jobs that run on Oracle ERP Cloud to perform data upload operations.The job name you select is used to import data.The list of import jobs is obtained by invoking ErpIcsIntegrationService in the service catalog service WSDL.The following information is obtained with each job: Interface ID: The import job key.UCM account: The account with which to upload the file.Import job name and package name: To be displayed in the user interface.Description: The bulk data import process description.Note: If import jobs do not appear in the list, there may be several causes.See Jobs Not Appearing in the Import Jobs List on the Operations Page .Reuse job property file uploaded separately in respective UCM accountSelect this check box, then enter the job property file name (without an extension) that Oracle ERP Cloud can obtain from the respective UCM account.Job Property File Enter the job property file name (without the extension) that Oracle ERP Cloud gets from the UCM account.Extract File Select the type of log data for Oracle ERP Cloud to extract while processing the data file: All: All failed records with supporting load and import process files.Error: Records that failed to load and import.Log: Log files for load and import processes.
Import jobs are the background jobs that run on Oracle ERP Cloud to perform data upload operations.The job name you select is used to import data.The list of import jobs is obtained by invoking ErpIcsIntegrationService in the service catalog service WSDL.The following information is obtained with each job: Interface ID: The import job key.UCM account: The account with which to upload the file.Import job name and package name: To be displayed in the user interface.Description: The bulk data import process description.Note: If import jobs do not appear in the list, there may be several causes.See Jobs Not Appearing in the Import Jobs List on the Operations Page .Reuse job property file uploaded separately in respective UCM accountSelect this check box, then enter the job property file name (without an extension) that Oracle ERP Cloud can obtain from the respective UCM account.Job Property File Enter the job property file name (without the extension) that Oracle ERP Cloud gets from the UCM account.Extract File Select the type of log data for Oracle ERP Cloud to extract while processing the data file: All: All failed records with supporting load and import process files.Error: Records that failed to load and import.Log: Log files for load and import processes.Out: Output files for load and import processes.
The job name you select is used to import data.The list of import jobs is obtained by invoking ErpIcsIntegrationService in the service catalog service WSDL.The following information is obtained with each job: Interface ID: The import job key.UCM account: The account with which to upload the file.Import job name and package name: To be displayed in the user interface.Description: The bulk data import process description.Note: If import jobs do not appear in the list, there may be several causes.See Jobs Not Appearing in the Import Jobs List on the Operations Page .Reuse job property file uploaded separately in respective UCM accountSelect this check box, then enter the job property file name (without an extension) that Oracle ERP Cloud can obtain from the respective UCM account.Job Property File Enter the job property file name (without the extension) that Oracle ERP Cloud gets from the UCM account.Extract File Select the type of log data for Oracle ERP Cloud to extract while processing the data file: All: All failed records with supporting load and import process files.Error: Records that failed to load and import.Log: Log files for load and import processes.Out: Output files for load and import processes.None: None.
The list of import jobs is obtained by invoking ErpIcsIntegrationService in the service catalog service WSDL.The following information is obtained with each job: Interface ID: The import job key.UCM account: The account with which to upload the file.Import job name and package name: To be displayed in the user interface.Description: The bulk data import process description.Note: If import jobs do not appear in the list, there may be several causes.See Jobs Not Appearing in the Import Jobs List on the Operations Page .Reuse job property file uploaded separately in respective UCM accountSelect this check box, then enter the job property file name (without an extension) that Oracle ERP Cloud can obtain from the respective UCM account.Job Property File Enter the job property file name (without the extension) that Oracle ERP Cloud gets from the UCM account.Extract File Select the type of log data for Oracle ERP Cloud to extract while processing the data file: All: All failed records with supporting load and import process files.Error: Records that failed to load and import.Log: Log files for load and import processes.Out: Output files for load and import processes.None: None.Send Files to ERP Cloud If you selected Send Files to ERP Cloud on the Actions page, select the security group and doc account required for uploading the file.Chapter 3 Invoke Operations Page 3-9Element Description Security Group Select the security group in which to upload the file.
The following information is obtained with each job: Interface ID: The import job key.UCM account: The account with which to upload the file.Import job name and package name: To be displayed in the user interface.Description: The bulk data import process description.Note: If import jobs do not appear in the list, there may be several causes.See Jobs Not Appearing in the Import Jobs List on the Operations Page .Reuse job property file uploaded separately in respective UCM accountSelect this check box, then enter the job property file name (without an extension) that Oracle ERP Cloud can obtain from the respective UCM account.Job Property File Enter the job property file name (without the extension) that Oracle ERP Cloud gets from the UCM account.Extract File Select the type of log data for Oracle ERP Cloud to extract while processing the data file: All: All failed records with supporting load and import process files.Error: Records that failed to load and import.Log: Log files for load and import processes.Out: Output files for load and import processes.None: None.Send Files to ERP Cloud If you selected Send Files to ERP Cloud on the Actions page, select the security group and doc account required for uploading the file.Chapter 3 Invoke Operations Page 3-9Element Description Security Group Select the security group in which to upload the file.A security group is a set of files grouped under a unique name.
UCM account: The account with which to upload the file.Import job name and package name: To be displayed in the user interface.Description: The bulk data import process description.Note: If import jobs do not appear in the list, there may be several causes.See Jobs Not Appearing in the Import Jobs List on the Operations Page .Reuse job property file uploaded separately in respective UCM accountSelect this check box, then enter the job property file name (without an extension) that Oracle ERP Cloud can obtain from the respective UCM account.Job Property File Enter the job property file name (without the extension) that Oracle ERP Cloud gets from the UCM account.Extract File Select the type of log data for Oracle ERP Cloud to extract while processing the data file: All: All failed records with supporting load and import process files.Error: Records that failed to load and import.Log: Log files for load and import processes.Out: Output files for load and import processes.None: None.Send Files to ERP Cloud If you selected Send Files to ERP Cloud on the Actions page, select the security group and doc account required for uploading the file.Chapter 3 Invoke Operations Page 3-9Element Description Security Group Select the security group in which to upload the file.A security group is a set of files grouped under a unique name.Every file in the content server repository belongs to a security group.
Import job name and package name: To be displayed in the user interface.Description: The bulk data import process description.Note: If import jobs do not appear in the list, there may be several causes.See Jobs Not Appearing in the Import Jobs List on the Operations Page .Reuse job property file uploaded separately in respective UCM accountSelect this check box, then enter the job property file name (without an extension) that Oracle ERP Cloud can obtain from the respective UCM account.Job Property File Enter the job property file name (without the extension) that Oracle ERP Cloud gets from the UCM account.Extract File Select the type of log data for Oracle ERP Cloud to extract while processing the data file: All: All failed records with supporting load and import process files.Error: Records that failed to load and import.Log: Log files for load and import processes.Out: Output files for load and import processes.None: None.Send Files to ERP Cloud If you selected Send Files to ERP Cloud on the Actions page, select the security group and doc account required for uploading the file.Chapter 3 Invoke Operations Page 3-9Element Description Security Group Select the security group in which to upload the file.A security group is a set of files grouped under a unique name.Every file in the content server repository belongs to a security group.Access to security groups is controlled by permissions assigned to roles on the content server.
Description: The bulk data import process description.Note: If import jobs do not appear in the list, there may be several causes.See Jobs Not Appearing in the Import Jobs List on the Operations Page .Reuse job property file uploaded separately in respective UCM accountSelect this check box, then enter the job property file name (without an extension) that Oracle ERP Cloud can obtain from the respective UCM account.Job Property File Enter the job property file name (without the extension) that Oracle ERP Cloud gets from the UCM account.Extract File Select the type of log data for Oracle ERP Cloud to extract while processing the data file: All: All failed records with supporting load and import process files.Error: Records that failed to load and import.Log: Log files for load and import processes.Out: Output files for load and import processes.None: None.Send Files to ERP Cloud If you selected Send Files to ERP Cloud on the Actions page, select the security group and doc account required for uploading the file.Chapter 3 Invoke Operations Page 3-9Element Description Security Group Select the security group in which to upload the file.A security group is a set of files grouped under a unique name.Every file in the content server repository belongs to a security group.Access to security groups is controlled by permissions assigned to roles on the content server.Roles are assigned to users where they are maintained in Oracle Fusion Applications.
Note: If import jobs do not appear in the list, there may be several causes.See Jobs Not Appearing in the Import Jobs List on the Operations Page .Reuse job property file uploaded separately in respective UCM accountSelect this check box, then enter the job property file name (without an extension) that Oracle ERP Cloud can obtain from the respective UCM account.Job Property File Enter the job property file name (without the extension) that Oracle ERP Cloud gets from the UCM account.Extract File Select the type of log data for Oracle ERP Cloud to extract while processing the data file: All: All failed records with supporting load and import process files.Error: Records that failed to load and import.Log: Log files for load and import processes.Out: Output files for load and import processes.None: None.Send Files to ERP Cloud If you selected Send Files to ERP Cloud on the Actions page, select the security group and doc account required for uploading the file.Chapter 3 Invoke Operations Page 3-9Element Description Security Group Select the security group in which to upload the file.A security group is a set of files grouped under a unique name.Every file in the content server repository belongs to a security group.Access to security groups is controlled by permissions assigned to roles on the content server.Roles are assigned to users where they are maintained in Oracle Fusion Applications.The default security group in Fusion Applications is FAFusionImportExport.
See Jobs Not Appearing in the Import Jobs List on the Operations Page .Reuse job property file uploaded separately in respective UCM accountSelect this check box, then enter the job property file name (without an extension) that Oracle ERP Cloud can obtain from the respective UCM account.Job Property File Enter the job property file name (without the extension) that Oracle ERP Cloud gets from the UCM account.Extract File Select the type of log data for Oracle ERP Cloud to extract while processing the data file: All: All failed records with supporting load and import process files.Error: Records that failed to load and import.Log: Log files for load and import processes.Out: Output files for load and import processes.None: None.Send Files to ERP Cloud If you selected Send Files to ERP Cloud on the Actions page, select the security group and doc account required for uploading the file.Chapter 3 Invoke Operations Page 3-9Element Description Security Group Select the security group in which to upload the file.A security group is a set of files grouped under a unique name.Every file in the content server repository belongs to a security group.Access to security groups is controlled by permissions assigned to roles on the content server.Roles are assigned to users where they are maintained in Oracle Fusion Applications.The default security group in Fusion Applications is FAFusionImportExport.Doc Account Select the doc account to assign to the file.
Reuse job property file uploaded separately in respective UCM accountSelect this check box, then enter the job property file name (without an extension) that Oracle ERP Cloud can obtain from the respective UCM account.Job Property File Enter the job property file name (without the extension) that Oracle ERP Cloud gets from the UCM account.Extract File Select the type of log data for Oracle ERP Cloud to extract while processing the data file: All: All failed records with supporting load and import process files.Error: Records that failed to load and import.Log: Log files for load and import processes.Out: Output files for load and import processes.None: None.Send Files to ERP Cloud If you selected Send Files to ERP Cloud on the Actions page, select the security group and doc account required for uploading the file.Chapter 3 Invoke Operations Page 3-9Element Description Security Group Select the security group in which to upload the file.A security group is a set of files grouped under a unique name.Every file in the content server repository belongs to a security group.Access to security groups is controlled by permissions assigned to roles on the content server.Roles are assigned to users where they are maintained in Oracle Fusion Applications.The default security group in Fusion Applications is FAFusionImportExport.Doc Account Select the doc account to assign to the file.In Fusion Applications, every content item has an account assigned to it.
Job Property File Enter the job property file name (without the extension) that Oracle ERP Cloud gets from the UCM account.Extract File Select the type of log data for Oracle ERP Cloud to extract while processing the data file: All: All failed records with supporting load and import process files.Error: Records that failed to load and import.Log: Log files for load and import processes.Out: Output files for load and import processes.None: None.Send Files to ERP Cloud If you selected Send Files to ERP Cloud on the Actions page, select the security group and doc account required for uploading the file.Chapter 3 Invoke Operations Page 3-9Element Description Security Group Select the security group in which to upload the file.A security group is a set of files grouped under a unique name.Every file in the content server repository belongs to a security group.Access to security groups is controlled by permissions assigned to roles on the content server.Roles are assigned to users where they are maintained in Oracle Fusion Applications.The default security group in Fusion Applications is FAFusionImportExport.Doc Account Select the doc account to assign to the file.In Fusion Applications, every content item has an account assigned to it.You must have the appropriate permission to the account such as read and/or write.
Extract File Select the type of log data for Oracle ERP Cloud to extract while processing the data file: All: All failed records with supporting load and import process files.Error: Records that failed to load and import.Log: Log files for load and import processes.Out: Output files for load and import processes.None: None.Send Files to ERP Cloud If you selected Send Files to ERP Cloud on the Actions page, select the security group and doc account required for uploading the file.Chapter 3 Invoke Operations Page 3-9Element Description Security Group Select the security group in which to upload the file.A security group is a set of files grouped under a unique name.Every file in the content server repository belongs to a security group.Access to security groups is controlled by permissions assigned to roles on the content server.Roles are assigned to users where they are maintained in Oracle Fusion Applications.The default security group in Fusion Applications is FAFusionImportExport.Doc Account Select the doc account to assign to the file.In Fusion Applications, every content item has an account assigned to it.You must have the appropriate permission to the account such as read and/or write.The access to the document is the intersection between account permissions and security group permissions.
Error: Records that failed to load and import.Log: Log files for load and import processes.Out: Output files for load and import processes.None: None.Send Files to ERP Cloud If you selected Send Files to ERP Cloud on the Actions page, select the security group and doc account required for uploading the file.Chapter 3 Invoke Operations Page 3-9Element Description Security Group Select the security group in which to upload the file.A security group is a set of files grouped under a unique name.Every file in the content server repository belongs to a security group.Access to security groups is controlled by permissions assigned to roles on the content server.Roles are assigned to users where they are maintained in Oracle Fusion Applications.The default security group in Fusion Applications is FAFusionImportExport.Doc Account Select the doc account to assign to the file.In Fusion Applications, every content item has an account assigned to it.You must have the appropriate permission to the account such as read and/or write.The access to the document is the intersection between account permissions and security group permissions.There are several Fusion Applications accounts.
Log: Log files for load and import processes.Out: Output files for load and import processes.None: None.Send Files to ERP Cloud If you selected Send Files to ERP Cloud on the Actions page, select the security group and doc account required for uploading the file.Chapter 3 Invoke Operations Page 3-9Element Description Security Group Select the security group in which to upload the file.A security group is a set of files grouped under a unique name.Every file in the content server repository belongs to a security group.Access to security groups is controlled by permissions assigned to roles on the content server.Roles are assigned to users where they are maintained in Oracle Fusion Applications.The default security group in Fusion Applications is FAFusionImportExport.Doc Account Select the doc account to assign to the file.In Fusion Applications, every content item has an account assigned to it.You must have the appropriate permission to the account such as read and/or write.The access to the document is the intersection between account permissions and security group permissions.There are several Fusion Applications accounts.Encrypt the File Select this checkbox to encrypt the file before upload to UCM.
Out: Output files for load and import processes.None: None.Send Files to ERP Cloud If you selected Send Files to ERP Cloud on the Actions page, select the security group and doc account required for uploading the file.Chapter 3 Invoke Operations Page 3-9Element Description Security Group Select the security group in which to upload the file.A security group is a set of files grouped under a unique name.Every file in the content server repository belongs to a security group.Access to security groups is controlled by permissions assigned to roles on the content server.Roles are assigned to users where they are maintained in Oracle Fusion Applications.The default security group in Fusion Applications is FAFusionImportExport.Doc Account Select the doc account to assign to the file.In Fusion Applications, every content item has an account assigned to it.You must have the appropriate permission to the account such as read and/or write.The access to the document is the intersection between account permissions and security group permissions.There are several Fusion Applications accounts.Encrypt the File Select this checkbox to encrypt the file before upload to UCM.To select this checkbox, you must have selected to encrypt the file when configuring the Oracle ERP Cloud Adapter connection on the Connections page.
None: None.Send Files to ERP Cloud If you selected Send Files to ERP Cloud on the Actions page, select the security group and doc account required for uploading the file.Chapter 3 Invoke Operations Page 3-9Element Description Security Group Select the security group in which to upload the file.A security group is a set of files grouped under a unique name.Every file in the content server repository belongs to a security group.Access to security groups is controlled by permissions assigned to roles on the content server.Roles are assigned to users where they are maintained in Oracle Fusion Applications.The default security group in Fusion Applications is FAFusionImportExport.Doc Account Select the doc account to assign to the file.In Fusion Applications, every content item has an account assigned to it.You must have the appropriate permission to the account such as read and/or write.The access to the document is the intersection between account permissions and security group permissions.There are several Fusion Applications accounts.Encrypt the File Select this checkbox to encrypt the file before upload to UCM.To select this checkbox, you must have selected to encrypt the file when configuring the Oracle ERP Cloud Adapter connection on the Connections page.See Configure Connection Security.
Send Files to ERP Cloud If you selected Send Files to ERP Cloud on the Actions page, select the security group and doc account required for uploading the file.Chapter 3 Invoke Operations Page 3-9Element Description Security Group Select the security group in which to upload the file.A security group is a set of files grouped under a unique name.Every file in the content server repository belongs to a security group.Access to security groups is controlled by permissions assigned to roles on the content server.Roles are assigned to users where they are maintained in Oracle Fusion Applications.The default security group in Fusion Applications is FAFusionImportExport.Doc Account Select the doc account to assign to the file.In Fusion Applications, every content item has an account assigned to it.You must have the appropriate permission to the account such as read and/or write.The access to the document is the intersection between account permissions and security group permissions.There are several Fusion Applications accounts.Encrypt the File Select this checkbox to encrypt the file before upload to UCM.To select this checkbox, you must have selected to encrypt the file when configuring the Oracle ERP Cloud Adapter connection on the Connections page.See Configure Connection Security.See Understanding Security and User Access of Administering Oracle WebCenter Content .
A security group is a set of files grouped under a unique name.Every file in the content server repository belongs to a security group.Access to security groups is controlled by permissions assigned to roles on the content server.Roles are assigned to users where they are maintained in Oracle Fusion Applications.The default security group in Fusion Applications is FAFusionImportExport.Doc Account Select the doc account to assign to the file.In Fusion Applications, every content item has an account assigned to it.You must have the appropriate permission to the account such as read and/or write.The access to the document is the intersection between account permissions and security group permissions.There are several Fusion Applications accounts.Encrypt the File Select this checkbox to encrypt the file before upload to UCM.To select this checkbox, you must have selected to encrypt the file when configuring the Oracle ERP Cloud Adapter connection on the Connections page.See Configure Connection Security.See Understanding Security and User Access of Administering Oracle WebCenter Content .Invoke Response Page Enter the Oracle ERP Cloud invoke response values for your integration.
Every file in the content server repository belongs to a security group.Access to security groups is controlled by permissions assigned to roles on the content server.Roles are assigned to users where they are maintained in Oracle Fusion Applications.The default security group in Fusion Applications is FAFusionImportExport.Doc Account Select the doc account to assign to the file.In Fusion Applications, every content item has an account assigned to it.You must have the appropriate permission to the account such as read and/or write.The access to the document is the intersection between account permissions and security group permissions.There are several Fusion Applications accounts.Encrypt the File Select this checkbox to encrypt the file before upload to UCM.To select this checkbox, you must have selected to encrypt the file when configuring the Oracle ERP Cloud Adapter connection on the Connections page.See Configure Connection Security.See Understanding Security and User Access of Administering Oracle WebCenter Content .Invoke Response Page Enter the Oracle ERP Cloud invoke response values for your integration.Element Description Notification Mode Select an option for being notified of data import completion status.
Access to security groups is controlled by permissions assigned to roles on the content server.Roles are assigned to users where they are maintained in Oracle Fusion Applications.The default security group in Fusion Applications is FAFusionImportExport.Doc Account Select the doc account to assign to the file.In Fusion Applications, every content item has an account assigned to it.You must have the appropriate permission to the account such as read and/or write.The access to the document is the intersection between account permissions and security group permissions.There are several Fusion Applications accounts.Encrypt the File Select this checkbox to encrypt the file before upload to UCM.To select this checkbox, you must have selected to encrypt the file when configuring the Oracle ERP Cloud Adapter connection on the Connections page.See Configure Connection Security.See Understanding Security and User Access of Administering Oracle WebCenter Content .Invoke Response Page Enter the Oracle ERP Cloud invoke response values for your integration.Element Description Notification Mode Select an option for being notified of data import completion status.These options are configured in the Oracle ERP Cloud application.
Roles are assigned to users where they are maintained in Oracle Fusion Applications.The default security group in Fusion Applications is FAFusionImportExport.Doc Account Select the doc account to assign to the file.In Fusion Applications, every content item has an account assigned to it.You must have the appropriate permission to the account such as read and/or write.The access to the document is the intersection between account permissions and security group permissions.There are several Fusion Applications accounts.Encrypt the File Select this checkbox to encrypt the file before upload to UCM.To select this checkbox, you must have selected to encrypt the file when configuring the Oracle ERP Cloud Adapter connection on the Connections page.See Configure Connection Security.See Understanding Security and User Access of Administering Oracle WebCenter Content .Invoke Response Page Enter the Oracle ERP Cloud invoke response values for your integration.Element Description Notification Mode Select an option for being notified of data import completion status.These options are configured in the Oracle ERP Cloud application.This information is sent from Oracle Integration to the Oracle ERP Cloud application.
The default security group in Fusion Applications is FAFusionImportExport.Doc Account Select the doc account to assign to the file.In Fusion Applications, every content item has an account assigned to it.You must have the appropriate permission to the account such as read and/or write.The access to the document is the intersection between account permissions and security group permissions.There are several Fusion Applications accounts.Encrypt the File Select this checkbox to encrypt the file before upload to UCM.To select this checkbox, you must have selected to encrypt the file when configuring the Oracle ERP Cloud Adapter connection on the Connections page.See Configure Connection Security.See Understanding Security and User Access of Administering Oracle WebCenter Content .Invoke Response Page Enter the Oracle ERP Cloud invoke response values for your integration.Element Description Notification Mode Select an option for being notified of data import completion status.These options are configured in the Oracle ERP Cloud application.This information is sent from Oracle Integration to the Oracle ERP Cloud application.Email & Bell Notification : Select to receive both email and bell notifications.
Doc Account Select the doc account to assign to the file.In Fusion Applications, every content item has an account assigned to it.You must have the appropriate permission to the account such as read and/or write.The access to the document is the intersection between account permissions and security group permissions.There are several Fusion Applications accounts.Encrypt the File Select this checkbox to encrypt the file before upload to UCM.To select this checkbox, you must have selected to encrypt the file when configuring the Oracle ERP Cloud Adapter connection on the Connections page.See Configure Connection Security.See Understanding Security and User Access of Administering Oracle WebCenter Content .Invoke Response Page Enter the Oracle ERP Cloud invoke response values for your integration.Element Description Notification Mode Select an option for being notified of data import completion status.These options are configured in the Oracle ERP Cloud application.This information is sent from Oracle Integration to the Oracle ERP Cloud application.Email & Bell Notification : Select to receive both email and bell notifications.Email notification : Select to receive only an email notification.
In Fusion Applications, every content item has an account assigned to it.You must have the appropriate permission to the account such as read and/or write.The access to the document is the intersection between account permissions and security group permissions.There are several Fusion Applications accounts.Encrypt the File Select this checkbox to encrypt the file before upload to UCM.To select this checkbox, you must have selected to encrypt the file when configuring the Oracle ERP Cloud Adapter connection on the Connections page.See Configure Connection Security.See Understanding Security and User Access of Administering Oracle WebCenter Content .Invoke Response Page Enter the Oracle ERP Cloud invoke response values for your integration.Element Description Notification Mode Select an option for being notified of data import completion status.These options are configured in the Oracle ERP Cloud application.This information is sent from Oracle Integration to the Oracle ERP Cloud application.Email & Bell Notification : Select to receive both email and bell notifications.Email notification : Select to receive only an email notification.Bell Notification : Select to receive only a bell notification.
You must have the appropriate permission to the account such as read and/or write.The access to the document is the intersection between account permissions and security group permissions.There are several Fusion Applications accounts.Encrypt the File Select this checkbox to encrypt the file before upload to UCM.To select this checkbox, you must have selected to encrypt the file when configuring the Oracle ERP Cloud Adapter connection on the Connections page.See Configure Connection Security.See Understanding Security and User Access of Administering Oracle WebCenter Content .Invoke Response Page Enter the Oracle ERP Cloud invoke response values for your integration.Element Description Notification Mode Select an option for being notified of data import completion status.These options are configured in the Oracle ERP Cloud application.This information is sent from Oracle Integration to the Oracle ERP Cloud application.Email & Bell Notification : Select to receive both email and bell notifications.Email notification : Select to receive only an email notification.Bell Notification : Select to receive only a bell notification.Occurrence Select when to receive a notification about data import status: Send in any case Send on import success Send on import failureChapter 3 Invoke Response Page 3-10Element Description Enable Callback Select to enable callback behavior for the import job selected on the Operations page.
The access to the document is the intersection between account permissions and security group permissions.There are several Fusion Applications accounts.Encrypt the File Select this checkbox to encrypt the file before upload to UCM.To select this checkbox, you must have selected to encrypt the file when configuring the Oracle ERP Cloud Adapter connection on the Connections page.See Configure Connection Security.See Understanding Security and User Access of Administering Oracle WebCenter Content .Invoke Response Page Enter the Oracle ERP Cloud invoke response values for your integration.Element Description Notification Mode Select an option for being notified of data import completion status.These options are configured in the Oracle ERP Cloud application.This information is sent from Oracle Integration to the Oracle ERP Cloud application.Email & Bell Notification : Select to receive both email and bell notifications.Email notification : Select to receive only an email notification.Bell Notification : Select to receive only a bell notification.Occurrence Select when to receive a notification about data import status: Send in any case Send on import success Send on import failureChapter 3 Invoke Response Page 3-10Element Description Enable Callback Select to enable callback behavior for the import job selected on the Operations page.When you select this option for new integrations, the ErpImportBulkData event of Oracle ERP Cloud is raised once the import job completes.
There are several Fusion Applications accounts.Encrypt the File Select this checkbox to encrypt the file before upload to UCM.To select this checkbox, you must have selected to encrypt the file when configuring the Oracle ERP Cloud Adapter connection on the Connections page.See Configure Connection Security.See Understanding Security and User Access of Administering Oracle WebCenter Content .Invoke Response Page Enter the Oracle ERP Cloud invoke response values for your integration.Element Description Notification Mode Select an option for being notified of data import completion status.These options are configured in the Oracle ERP Cloud application.This information is sent from Oracle Integration to the Oracle ERP Cloud application.Email & Bell Notification : Select to receive both email and bell notifications.Email notification : Select to receive only an email notification.Bell Notification : Select to receive only a bell notification.Occurrence Select when to receive a notification about data import status: Send in any case Send on import success Send on import failureChapter 3 Invoke Response Page 3-10Element Description Enable Callback Select to enable callback behavior for the import job selected on the Operations page.When you select this option for new integrations, the ErpImportBulkData event of Oracle ERP Cloud is raised once the import job completes.When you select this option for existing integrations, you must also provide the callback integration and callback identifier described in the fields below.
Encrypt the File Select this checkbox to encrypt the file before upload to UCM.To select this checkbox, you must have selected to encrypt the file when configuring the Oracle ERP Cloud Adapter connection on the Connections page.See Configure Connection Security.See Understanding Security and User Access of Administering Oracle WebCenter Content .Invoke Response Page Enter the Oracle ERP Cloud invoke response values for your integration.Element Description Notification Mode Select an option for being notified of data import completion status.These options are configured in the Oracle ERP Cloud application.This information is sent from Oracle Integration to the Oracle ERP Cloud application.Email & Bell Notification : Select to receive both email and bell notifications.Email notification : Select to receive only an email notification.Bell Notification : Select to receive only a bell notification.Occurrence Select when to receive a notification about data import status: Send in any case Send on import success Send on import failureChapter 3 Invoke Response Page 3-10Element Description Enable Callback Select to enable callback behavior for the import job selected on the Operations page.When you select this option for new integrations, the ErpImportBulkData event of Oracle ERP Cloud is raised once the import job completes.When you select this option for existing integrations, you must also provide the callback integration and callback identifier described in the fields below.Integration Flow Identifier (This field is visible when using an Oracle ERP Cloud Adapter connection in an existing integration.
To select this checkbox, you must have selected to encrypt the file when configuring the Oracle ERP Cloud Adapter connection on the Connections page.See Configure Connection Security.See Understanding Security and User Access of Administering Oracle WebCenter Content .Invoke Response Page Enter the Oracle ERP Cloud invoke response values for your integration.Element Description Notification Mode Select an option for being notified of data import completion status.These options are configured in the Oracle ERP Cloud application.This information is sent from Oracle Integration to the Oracle ERP Cloud application.Email & Bell Notification : Select to receive both email and bell notifications.Email notification : Select to receive only an email notification.Bell Notification : Select to receive only a bell notification.Occurrence Select when to receive a notification about data import status: Send in any case Send on import success Send on import failureChapter 3 Invoke Response Page 3-10Element Description Enable Callback Select to enable callback behavior for the import job selected on the Operations page.When you select this option for new integrations, the ErpImportBulkData event of Oracle ERP Cloud is raised once the import job completes.When you select this option for existing integrations, you must also provide the callback integration and callback identifier described in the fields below.Integration Flow Identifier (This field is visible when using an Oracle ERP Cloud Adapter connection in an existing integration.)Optionally specify a callback integration in which to receive details about the status of the outbound Oracle ERP Cloud request flow (failed records) (for example, enter 01.00.0000 ).
See Configure Connection Security.See Understanding Security and User Access of Administering Oracle WebCenter Content .Invoke Response Page Enter the Oracle ERP Cloud invoke response values for your integration.Element Description Notification Mode Select an option for being notified of data import completion status.These options are configured in the Oracle ERP Cloud application.This information is sent from Oracle Integration to the Oracle ERP Cloud application.Email & Bell Notification : Select to receive both email and bell notifications.Email notification : Select to receive only an email notification.Bell Notification : Select to receive only a bell notification.Occurrence Select when to receive a notification about data import status: Send in any case Send on import success Send on import failureChapter 3 Invoke Response Page 3-10Element Description Enable Callback Select to enable callback behavior for the import job selected on the Operations page.When you select this option for new integrations, the ErpImportBulkData event of Oracle ERP Cloud is raised once the import job completes.When you select this option for existing integrations, you must also provide the callback integration and callback identifier described in the fields below.Integration Flow Identifier (This field is visible when using an Oracle ERP Cloud Adapter connection in an existing integration.)Optionally specify a callback integration in which to receive details about the status of the outbound Oracle ERP Cloud request flow (failed records) (for example, enter 01.00.0000 ).This is a completely separate integration that handles callbacks.
See Understanding Security and User Access of Administering Oracle WebCenter Content .Invoke Response Page Enter the Oracle ERP Cloud invoke response values for your integration.Element Description Notification Mode Select an option for being notified of data import completion status.These options are configured in the Oracle ERP Cloud application.This information is sent from Oracle Integration to the Oracle ERP Cloud application.Email & Bell Notification : Select to receive both email and bell notifications.Email notification : Select to receive only an email notification.Bell Notification : Select to receive only a bell notification.Occurrence Select when to receive a notification about data import status: Send in any case Send on import success Send on import failureChapter 3 Invoke Response Page 3-10Element Description Enable Callback Select to enable callback behavior for the import job selected on the Operations page.When you select this option for new integrations, the ErpImportBulkData event of Oracle ERP Cloud is raised once the import job completes.When you select this option for existing integrations, you must also provide the callback integration and callback identifier described in the fields below.Integration Flow Identifier (This field is visible when using an Oracle ERP Cloud Adapter connection in an existing integration.)Optionally specify a callback integration in which to receive details about the status of the outbound Oracle ERP Cloud request flow (failed records) (for example, enter 01.00.0000 ).This is a completely separate integration that handles callbacks.The name of the integration is only required to trigger a second integration.
Invoke Response Page Enter the Oracle ERP Cloud invoke response values for your integration.Element Description Notification Mode Select an option for being notified of data import completion status.These options are configured in the Oracle ERP Cloud application.This information is sent from Oracle Integration to the Oracle ERP Cloud application.Email & Bell Notification : Select to receive both email and bell notifications.Email notification : Select to receive only an email notification.Bell Notification : Select to receive only a bell notification.Occurrence Select when to receive a notification about data import status: Send in any case Send on import success Send on import failureChapter 3 Invoke Response Page 3-10Element Description Enable Callback Select to enable callback behavior for the import job selected on the Operations page.When you select this option for new integrations, the ErpImportBulkData event of Oracle ERP Cloud is raised once the import job completes.When you select this option for existing integrations, you must also provide the callback integration and callback identifier described in the fields below.Integration Flow Identifier (This field is visible when using an Oracle ERP Cloud Adapter connection in an existing integration.)Optionally specify a callback integration in which to receive details about the status of the outbound Oracle ERP Cloud request flow (failed records) (for example, enter 01.00.0000 ).This is a completely separate integration that handles callbacks.The name of the integration is only required to trigger a second integration.Otherwise, this field can be left blank.
Element Description Notification Mode Select an option for being notified of data import completion status.These options are configured in the Oracle ERP Cloud application.This information is sent from Oracle Integration to the Oracle ERP Cloud application.Email & Bell Notification : Select to receive both email and bell notifications.Email notification : Select to receive only an email notification.Bell Notification : Select to receive only a bell notification.Occurrence Select when to receive a notification about data import status: Send in any case Send on import success Send on import failureChapter 3 Invoke Response Page 3-10Element Description Enable Callback Select to enable callback behavior for the import job selected on the Operations page.When you select this option for new integrations, the ErpImportBulkData event of Oracle ERP Cloud is raised once the import job completes.When you select this option for existing integrations, you must also provide the callback integration and callback identifier described in the fields below.Integration Flow Identifier (This field is visible when using an Oracle ERP Cloud Adapter connection in an existing integration.)Optionally specify a callback integration in which to receive details about the status of the outbound Oracle ERP Cloud request flow (failed records) (for example, enter 01.00.0000 ).This is a completely separate integration that handles callbacks.The name of the integration is only required to trigger a second integration.Otherwise, this field can be left blank.The inbound integration is expected to handle callbacks from Oracle ERP Cloud.
These options are configured in the Oracle ERP Cloud application.This information is sent from Oracle Integration to the Oracle ERP Cloud application.Email & Bell Notification : Select to receive both email and bell notifications.Email notification : Select to receive only an email notification.Bell Notification : Select to receive only a bell notification.Occurrence Select when to receive a notification about data import status: Send in any case Send on import success Send on import failureChapter 3 Invoke Response Page 3-10Element Description Enable Callback Select to enable callback behavior for the import job selected on the Operations page.When you select this option for new integrations, the ErpImportBulkData event of Oracle ERP Cloud is raised once the import job completes.When you select this option for existing integrations, you must also provide the callback integration and callback identifier described in the fields below.Integration Flow Identifier (This field is visible when using an Oracle ERP Cloud Adapter connection in an existing integration.)Optionally specify a callback integration in which to receive details about the status of the outbound Oracle ERP Cloud request flow (failed records) (for example, enter 01.00.0000 ).This is a completely separate integration that handles callbacks.The name of the integration is only required to trigger a second integration.Otherwise, this field can be left blank.The inbound integration is expected to handle callbacks from Oracle ERP Cloud.The integration must have an Oracle ERP Cloud Adapter configured in the trigger (inbound) direction.

Subsets and Splits

No community queries yet

The top public SQL queries from the community will appear here once available.